* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-/* Some documentation about various registers as determined by trial and error.
-
- Register page 1:
-
- Address Description
- 0x78 Global control, bit 6 controls the LED (inverted)
-
- Register page 3:
-
- Address Description
- 0x02 Clock divider 3-63, fps = 90 / val. Must be a multiple of 3 on
- the 7302, so one of 3, 6, 9, ..., except when between 6 and 12?
- 0x03 Variable framerate ctrl reg2==3: 0 -> ~30 fps, 255 -> ~22fps
- 0x04 Another var framerate ctrl reg2==3, reg3==0: 0 -> ~30 fps,
- 63 -> ~27 fps, the 2 msb's must always be 1 !!
- 0x05 Another var framerate ctrl reg2==3, reg3==0, reg4==0xc0:
- 1 -> ~30 fps, 2 -> ~20 fps
- 0x0e Exposure bits 0-7, 0-448, 0 = use full frame time
- 0x0f Exposure bit 8, 0-448, 448 = no exposure at all
- 0x10 Master gain 0-31
- 0x21 Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused
-
- The registers are accessed in the following functions:
-
- Page | Register | Function
- -----+------------+---------------------------------------------------
- 0 | 0x0f..0x20 | setcolors()
- 0 | 0xa2..0xab | setbrightcont()
- 0 | 0xc5 | setredbalance()
- 0 | 0xc6 | setwhitebalance()
- 0 | 0xc7 | setbluebalance()
- 0 | 0xdc | setbrightcont(), setcolors()
- 3 | 0x02 | setexposure()
- 3 | 0x10 | setgain()
- 3 | 0x11 | setcolors(), setgain(), setexposure(), sethvflip()
- 3 | 0x21 | sethvflip()
-*/
+/*
+ * Some documentation about various registers as determined by trial and error.
+ *
+ * Register page 1:
+ *
+ * Address Description
+ * 0x78 Global control, bit 6 controls the LED (inverted)
+ *
+ * Register page 3:
+ *
+ * Address Description
+ * 0x02 Clock divider 3-63, fps = 90 / val. Must be a multiple of 3 on
+ * the 7302, so one of 3, 6, 9, ..., except when between 6 and 12?
+ * 0x03 Variable framerate ctrl reg2==3: 0 -> ~30 fps, 255 -> ~22fps
+ * 0x04 Another var framerate ctrl reg2==3, reg3==0: 0 -> ~30 fps,
+ * 63 -> ~27 fps, the 2 msb's must always be 1 !!
+ * 0x05 Another var framerate ctrl reg2==3, reg3==0, reg4==0xc0:
+ * 1 -> ~30 fps, 2 -> ~20 fps
+ * 0x0e Exposure bits 0-7, 0-448, 0 = use full frame time
+ * 0x0f Exposure bit 8, 0-448, 448 = no exposure at all
+ * 0x10 Master gain 0-31
+ * 0x21 Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused
+ *
+ * The registers are accessed in the following functions:
+ *
+ * Page | Register | Function
+ * -----+------------+---------------------------------------------------
+ * 0 | 0x0f..0x20 | setcolors()
+ * 0 | 0xa2..0xab | setbrightcont()
+ * 0 | 0xc5 | setredbalance()
+ * 0 | 0xc6 | setwhitebalance()
+ * 0 | 0xc7 | setbluebalance()
+ * 0 | 0xdc | setbrightcont(), setcolors()
+ * 3 | 0x02 | setexposure()
+ * 3 | 0x10 | setgain()
+ * 3 | 0x11 | setcolors(), setgain(), setexposure(), sethvflip()
+ * 3 | 0x21 | sethvflip()
+ */
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
u8 clockdiv;
u16 exposure;
- /* register 2 of frame 3 contains the clock divider configuring the
- no fps according to the formula: 90 / reg. sd->exposure is the
- desired exposure time in 0.5 ms. */
+ /*
+ * Register 2 of frame 3 contains the clock divider configuring the
+ * no fps according to the formula: 90 / reg. sd->exposure is the
+ * desired exposure time in 0.5 ms.
+ */
clockdiv = (90 * sd->ctrls[EXPOSURE].val + 1999) / 2000;
- /* Note clockdiv = 3 also works, but when running at 30 fps, depending
- on the scene being recorded, the camera switches to another
- quantization table for certain JPEG blocks, and we don't know how
- to decompress these blocks. So we cap the framerate at 15 fps */
+ /*
+ * Note clockdiv = 3 also works, but when running at 30 fps, depending
+ * on the scene being recorded, the camera switches to another
+ * quantization table for certain JPEG blocks, and we don't know how
+ * to decompress these blocks. So we cap the framerate at 15 fps.
+ */
if (clockdiv < 6)
clockdiv = 6;
else if (clockdiv > 63)
clockdiv = 63;
- /* reg2 MUST be a multiple of 3, except when between 6 and 12?
- Always round up, otherwise we cannot get the desired frametime
- using the partial frame time exposure control */
+ /*
+ * Register 2 MUST be a multiple of 3, except when between 6 and 12?
+ * Always round up, otherwise we cannot get the desired frametime
+ * using the partial frame time exposure control.
+ */
if (clockdiv < 6 || clockdiv > 12)
clockdiv = ((clockdiv + 2) / 3) * 3;
- /* frame exposure time in ms = 1000 * clockdiv / 90 ->
- exposure = (sd->exposure / 2) * 448 / (1000 * clockdiv / 90) */
+ /*
+ * frame exposure time in ms = 1000 * clockdiv / 90 ->
+ * exposure = (sd->exposure / 2) * 448 / (1000 * clockdiv / 90)
+ */
exposure = (sd->ctrls[EXPOSURE].val * 45 * 448) / (1000 * clockdiv);
/* 0 = use full frametime, 448 = no exposure, reverse it */
exposure = 448 - exposure;
{
struct sd *sd = (struct sd *) gspca_dev;
- /* when switching to autogain set defaults to make sure
- we are on a valid point of the autogain gain /
- exposure knee graph, and give this change time to
- take effect before doing autogain. */
+ /*
+ * When switching to autogain set defaults to make sure
+ * we are on a valid point of the autogain gain /
+ * exposure knee graph, and give this change time to
+ * take effect before doing autogain.
+ */
if (sd->ctrls[AUTOGAIN].val) {
sd->ctrls[EXPOSURE].val = EXPOSURE_DEF;
sd->ctrls[GAIN].val = GAIN_DEF;
if (sof) {
int n, lum_offset, footer_length;
- /* 6 bytes after the FF D9 EOF marker a number of lumination
- bytes are send corresponding to different parts of the
- image, the 14th and 15th byte after the EOF seem to
- correspond to the center of the image */
+ /*
+ * 6 bytes after the FF D9 EOF marker a number of lumination
+ * bytes are send corresponding to different parts of the
+ * image, the 14th and 15th byte after the EOF seem to
+ * correspond to the center of the image.
+ */
lum_offset = 61 + sizeof pac_sof_marker;
footer_length = 74;
u8 index;
u8 value;
- /* reg->reg: bit0..15: reserved for register index (wIndex is 16bit
- long on the USB bus)
- */
+ /*
+ * reg->reg: bit0..15: reserved for register index (wIndex is 16bit
+ * long on the USB bus)
+ */
if (reg->match.type == V4L2_CHIP_MATCH_HOST &&
reg->match.addr == 0 &&
(reg->reg < 0x000000ff) &&
index = reg->reg;
value = reg->val;
- /* Note that there shall be no access to other page
- by any other function between the page swith and
- the actual register write */
+ /*
+ * Note that there shall be no access to other page
+ * by any other function between the page switch and
+ * the actual register write.
+ */
reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
reg_w(gspca_dev, index, value);
projects / ~andy / linux / commitdiff