original_pm_idle();
else
default_idle();
+ local_irq_disable();
jiffies_since_last_check = jiffies - last_jiffies;
if (jiffies_since_last_check > idle_period)
goto recalc;
if (apm_idle_done)
apm_do_busy();
+
+ local_irq_enable();
}
/**
#include <linux/smp.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/pm.h>
struct kmem_cache *task_xstate_cachep;
__alignof__(union thread_xstate),
SLAB_PANIC, NULL);
}
+
+static void do_nothing(void *unused)
+{
+}
+
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
+void cpu_idle_wait(void)
+{
+ smp_mb();
+ /* kick all the CPUs so that they exit out of pm_idle */
+ smp_call_function(do_nothing, NULL, 0, 1);
+}
+EXPORT_SYMBOL_GPL(cpu_idle_wait);
+
+/*
+ * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
+ * which can obviate IPI to trigger checking of need_resched.
+ * We execute MONITOR against need_resched and enter optimized wait state
+ * through MWAIT. Whenever someone changes need_resched, we would be woken
+ * up from MWAIT (without an IPI).
+ *
+ * New with Core Duo processors, MWAIT can take some hints based on CPU
+ * capability.
+ */
+void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
+{
+ if (!need_resched()) {
+ __monitor((void *)¤t_thread_info()->flags, 0, 0);
+ smp_mb();
+ if (!need_resched())
+ __mwait(ax, cx);
+ }
+}
+
+/* Default MONITOR/MWAIT with no hints, used for default C1 state */
+static void mwait_idle(void)
+{
+ if (!need_resched()) {
+ __monitor((void *)¤t_thread_info()->flags, 0, 0);
+ smp_mb();
+ if (!need_resched())
+ __sti_mwait(0, 0);
+ else
+ local_irq_enable();
+ } else
+ local_irq_enable();
+}
+
+
+static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
+{
+ if (force_mwait)
+ return 1;
+ /* Any C1 states supported? */
+ return c->cpuid_level >= 5 && ((cpuid_edx(5) >> 4) & 0xf) > 0;
+}
+
+/*
+ * On SMP it's slightly faster (but much more power-consuming!)
+ * to poll the ->work.need_resched flag instead of waiting for the
+ * cross-CPU IPI to arrive. Use this option with caution.
+ */
+static void poll_idle(void)
+{
+ local_irq_enable();
+ cpu_relax();
+}
+
+void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
+{
+ static int selected;
+
+ if (selected)
+ return;
+#ifdef CONFIG_X86_SMP
+ if (pm_idle == poll_idle && smp_num_siblings > 1) {
+ printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
+ " performance may degrade.\n");
+ }
+#endif
+ if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) {
+ /*
+ * Skip, if setup has overridden idle.
+ * One CPU supports mwait => All CPUs supports mwait
+ */
+ if (!pm_idle) {
+ printk(KERN_INFO "using mwait in idle threads.\n");
+ pm_idle = mwait_idle;
+ }
+ }
+ selected = 1;
+}
+
+static int __init idle_setup(char *str)
+{
+ if (!strcmp(str, "poll")) {
+ printk("using polling idle threads.\n");
+ pm_idle = poll_idle;
+ } else if (!strcmp(str, "mwait"))
+ force_mwait = 1;
+ else
+ return -1;
+
+ boot_option_idle_override = 1;
+ return 0;
+}
+early_param("idle", idle_setup);
+
*/
smp_mb();
- local_irq_disable();
- if (!need_resched()) {
+ if (!need_resched())
safe_halt(); /* enables interrupts racelessly */
- local_irq_disable();
- }
- local_irq_enable();
+ else
+ local_irq_enable();
current_thread_info()->status |= TS_POLLING;
} else {
local_irq_enable();
EXPORT_SYMBOL(default_idle);
#endif
-/*
- * On SMP it's slightly faster (but much more power-consuming!)
- * to poll the ->work.need_resched flag instead of waiting for the
- * cross-CPU IPI to arrive. Use this option with caution.
- */
-static void poll_idle(void)
-{
- local_irq_enable();
- cpu_relax();
-}
-
#ifdef CONFIG_HOTPLUG_CPU
#include <asm/nmi.h>
/* We don't actually take CPU down, just spin without interrupts. */
if (cpu_is_offline(cpu))
play_dead();
+ local_irq_disable();
__get_cpu_var(irq_stat).idle_timestamp = jiffies;
idle();
}
}
}
-static void do_nothing(void *unused)
-{
-}
-
-/*
- * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
- * pm_idle and update to new pm_idle value. Required while changing pm_idle
- * handler on SMP systems.
- *
- * Caller must have changed pm_idle to the new value before the call. Old
- * pm_idle value will not be used by any CPU after the return of this function.
- */
-void cpu_idle_wait(void)
-{
- smp_mb();
- /* kick all the CPUs so that they exit out of pm_idle */
- smp_call_function(do_nothing, NULL, 0, 1);
-}
-EXPORT_SYMBOL_GPL(cpu_idle_wait);
-
-/*
- * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
- * which can obviate IPI to trigger checking of need_resched.
- * We execute MONITOR against need_resched and enter optimized wait state
- * through MWAIT. Whenever someone changes need_resched, we would be woken
- * up from MWAIT (without an IPI).
- *
- * New with Core Duo processors, MWAIT can take some hints based on CPU
- * capability.
- */
-void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
-{
- if (!need_resched()) {
- __monitor((void *)¤t_thread_info()->flags, 0, 0);
- smp_mb();
- if (!need_resched())
- __sti_mwait(ax, cx);
- else
- local_irq_enable();
- } else
- local_irq_enable();
-}
-
-/* Default MONITOR/MWAIT with no hints, used for default C1 state */
-static void mwait_idle(void)
-{
- local_irq_enable();
- mwait_idle_with_hints(0, 0);
-}
-
-static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
-{
- if (force_mwait)
- return 1;
- /* Any C1 states supported? */
- return c->cpuid_level >= 5 && ((cpuid_edx(5) >> 4) & 0xf) > 0;
-}
-
-void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
-{
- static int selected;
-
- if (selected)
- return;
-#ifdef CONFIG_X86_SMP
- if (pm_idle == poll_idle && smp_num_siblings > 1) {
- printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
- " performance may degrade.\n");
- }
-#endif
- if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) {
- /*
- * Skip, if setup has overridden idle.
- * One CPU supports mwait => All CPUs supports mwait
- */
- if (!pm_idle) {
- printk(KERN_INFO "using mwait in idle threads.\n");
- pm_idle = mwait_idle;
- }
- }
- selected = 1;
-}
-
-static int __init idle_setup(char *str)
-{
- if (!strcmp(str, "poll")) {
- printk("using polling idle threads.\n");
- pm_idle = poll_idle;
- } else if (!strcmp(str, "mwait"))
- force_mwait = 1;
- else
- return -1;
-
- boot_option_idle_override = 1;
- return 0;
-}
-early_param("idle", idle_setup);
-
void __show_registers(struct pt_regs *regs, int all)
{
unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
* test NEED_RESCHED:
*/
smp_mb();
- local_irq_disable();
- if (!need_resched()) {
+ if (!need_resched())
safe_halt(); /* enables interrupts racelessly */
- local_irq_disable();
- }
- local_irq_enable();
+ else
+ local_irq_enable();
current_thread_info()->status |= TS_POLLING;
}
-/*
- * On SMP it's slightly faster (but much more power-consuming!)
- * to poll the ->need_resched flag instead of waiting for the
- * cross-CPU IPI to arrive. Use this option with caution.
- */
-static void poll_idle(void)
-{
- local_irq_enable();
- cpu_relax();
-}
-
#ifdef CONFIG_HOTPLUG_CPU
DECLARE_PER_CPU(int, cpu_state);
}
}
-static void do_nothing(void *unused)
-{
-}
-
-/*
- * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
- * pm_idle and update to new pm_idle value. Required while changing pm_idle
- * handler on SMP systems.
- *
- * Caller must have changed pm_idle to the new value before the call. Old
- * pm_idle value will not be used by any CPU after the return of this function.
- */
-void cpu_idle_wait(void)
-{
- smp_mb();
- /* kick all the CPUs so that they exit out of pm_idle */
- smp_call_function(do_nothing, NULL, 0, 1);
-}
-EXPORT_SYMBOL_GPL(cpu_idle_wait);
-
-/*
- * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
- * which can obviate IPI to trigger checking of need_resched.
- * We execute MONITOR against need_resched and enter optimized wait state
- * through MWAIT. Whenever someone changes need_resched, we would be woken
- * up from MWAIT (without an IPI).
- *
- * New with Core Duo processors, MWAIT can take some hints based on CPU
- * capability.
- */
-void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
-{
- if (!need_resched()) {
- __monitor((void *)¤t_thread_info()->flags, 0, 0);
- smp_mb();
- if (!need_resched())
- __mwait(ax, cx);
- }
-}
-
-/* Default MONITOR/MWAIT with no hints, used for default C1 state */
-static void mwait_idle(void)
-{
- if (!need_resched()) {
- __monitor((void *)¤t_thread_info()->flags, 0, 0);
- smp_mb();
- if (!need_resched())
- __sti_mwait(0, 0);
- else
- local_irq_enable();
- } else {
- local_irq_enable();
- }
-}
-
-
-static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
-{
- if (force_mwait)
- return 1;
- /* Any C1 states supported? */
- return c->cpuid_level >= 5 && ((cpuid_edx(5) >> 4) & 0xf) > 0;
-}
-
-void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
-{
- static int selected;
-
- if (selected)
- return;
-#ifdef CONFIG_X86_SMP
- if (pm_idle == poll_idle && smp_num_siblings > 1) {
- printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
- " performance may degrade.\n");
- }
-#endif
- if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) {
- /*
- * Skip, if setup has overridden idle.
- * One CPU supports mwait => All CPUs supports mwait
- */
- if (!pm_idle) {
- printk(KERN_INFO "using mwait in idle threads.\n");
- pm_idle = mwait_idle;
- }
- }
- selected = 1;
-}
-
-static int __init idle_setup(char *str)
-{
- if (!strcmp(str, "poll")) {
- printk("using polling idle threads.\n");
- pm_idle = poll_idle;
- } else if (!strcmp(str, "mwait"))
- force_mwait = 1;
- else
- return -1;
-
- boot_option_idle_override = 1;
- return 0;
-}
-early_param("idle", idle_setup);
-
/* Prints also some state that isn't saved in the pt_regs */
void __show_regs(struct pt_regs * regs)
{
cx = pr->power.state;
if (!cx || acpi_idle_suspend) {
- if (pm_idle_save)
- pm_idle_save();
- else
+ if (pm_idle_save) {
+ pm_idle_save(); /* enables IRQs */
+ } else {
acpi_safe_halt();
-
- if (irqs_disabled())
local_irq_enable();
+ }
return;
}
* Use the appropriate idle routine, the one that would
* be used without acpi C-states.
*/
- if (pm_idle_save)
- pm_idle_save();
- else
+ if (pm_idle_save) {
+ pm_idle_save(); /* enables IRQs */
+ } else {
acpi_safe_halt();
+ local_irq_enable();
+ }
/*
* TBD: Can't get time duration while in C1, as resumes
* skew otherwise.
*/
sleep_ticks = 0xFFFFFFFF;
- if (irqs_disabled())
- local_irq_enable();
break;
static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
{
+ trace_hardirqs_on();
/* "mwait %eax, %ecx;" */
asm volatile("sti; .byte 0x0f, 0x01, 0xc9;"
:: "a" (eax), "c" (ecx));
projects / ~andy / linux / commitdiff