]> Pileus Git - ~andy/linux/commitdiff
drm/i915: add pipe_config->pixel_multiplier
authorDaniel Vetter <daniel.vetter@ffwll.ch>
Tue, 26 Mar 2013 23:44:53 +0000 (00:44 +0100)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Wed, 27 Mar 2013 23:50:06 +0000 (00:50 +0100)
Used by SDVO (and hopefully, eventually HDMI, if we ever get around
to fixing up the low dotclock CEA modes ...).

This required adding a new encoder->mode_set callback to be able to
pass around the intel_crtc_config.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_sdvo.c

index 673d91a3e1f28e9bde3ecc7ca7bf628ad7452efe..7335ec2733de1857a563c50b2bfef95de0092089 100644 (file)
@@ -4337,14 +4337,15 @@ static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
 }
 
 static void vlv_update_pll(struct drm_crtc *crtc,
-                          struct drm_display_mode *mode,
-                          struct drm_display_mode *adjusted_mode,
                           intel_clock_t *clock, intel_clock_t *reduced_clock,
                           int num_connectors)
 {
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+       struct drm_display_mode *adjusted_mode =
+               &intel_crtc->config.adjusted_mode;
+       struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
        int pipe = intel_crtc->pipe;
        u32 dpll, mdiv, pdiv;
        u32 bestn, bestm1, bestm2, bestp1, bestp2;
@@ -4411,11 +4412,11 @@ static void vlv_update_pll(struct drm_crtc *crtc,
 
        temp = 0;
        if (is_sdvo) {
-               temp = intel_mode_get_pixel_multiplier(adjusted_mode);
-               if (temp > 1)
-                       temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
-               else
-                       temp = 0;
+               temp = 0;
+               if (intel_crtc->config.pixel_multiplier > 1) {
+                       temp = (intel_crtc->config.pixel_multiplier - 1)
+                               << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+               }
        }
        I915_WRITE(DPLL_MD(pipe), temp);
        POSTING_READ(DPLL_MD(pipe));
@@ -4441,14 +4442,15 @@ static void vlv_update_pll(struct drm_crtc *crtc,
 }
 
 static void i9xx_update_pll(struct drm_crtc *crtc,
-                           struct drm_display_mode *mode,
-                           struct drm_display_mode *adjusted_mode,
                            intel_clock_t *clock, intel_clock_t *reduced_clock,
                            int num_connectors)
 {
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+       struct drm_display_mode *adjusted_mode =
+               &intel_crtc->config.adjusted_mode;
+       struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
        struct intel_encoder *encoder;
        int pipe = intel_crtc->pipe;
        u32 dpll;
@@ -4465,11 +4467,12 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
                dpll |= DPLLB_MODE_LVDS;
        else
                dpll |= DPLLB_MODE_DAC_SERIAL;
+
        if (is_sdvo) {
-               int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
-               if (pixel_multiplier > 1) {
-                       if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
-                               dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+               if ((intel_crtc->config.pixel_multiplier > 1) &&
+                   (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))) {
+                       dpll |= (intel_crtc->config.pixel_multiplier - 1)
+                               << SDVO_MULTIPLIER_SHIFT_HIRES;
                }
                dpll |= DPLL_DVO_HIGH_SPEED;
        }
@@ -4534,11 +4537,11 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
        if (INTEL_INFO(dev)->gen >= 4) {
                u32 temp = 0;
                if (is_sdvo) {
-                       temp = intel_mode_get_pixel_multiplier(adjusted_mode);
-                       if (temp > 1)
-                               temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
-                       else
-                               temp = 0;
+                       temp = 0;
+                       if (intel_crtc->config.pixel_multiplier > 1) {
+                               temp = (intel_crtc->config.pixel_multiplier - 1)
+                                       << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+                       }
                }
                I915_WRITE(DPLL_MD(pipe), temp);
        } else {
@@ -4748,11 +4751,11 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
                                has_reduced_clock ? &reduced_clock : NULL,
                                num_connectors);
        else if (IS_VALLEYVIEW(dev))
-               vlv_update_pll(crtc, mode, adjusted_mode, &clock,
+               vlv_update_pll(crtc, &clock,
                                has_reduced_clock ? &reduced_clock : NULL,
                                num_connectors);
        else
-               i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
+               i9xx_update_pll(crtc, &clock,
                                has_reduced_clock ? &reduced_clock : NULL,
                                num_connectors);
 
@@ -5466,17 +5469,18 @@ int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
        return bps / (link_bw * 8) + 1;
 }
 
-static void ironlake_set_m_n(struct drm_crtc *crtc,
-                            struct drm_display_mode *mode,
-                            struct drm_display_mode *adjusted_mode)
+static void ironlake_set_m_n(struct drm_crtc *crtc)
 {
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+       struct drm_display_mode *adjusted_mode =
+               &intel_crtc->config.adjusted_mode;
+       struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
        enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
        struct intel_encoder *intel_encoder, *edp_encoder = NULL;
        struct intel_link_m_n m_n = {0};
-       int target_clock, pixel_multiplier, lane, link_bw;
+       int target_clock, lane, link_bw;
        bool is_dp = false, is_cpu_edp = false;
 
        for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
@@ -5494,7 +5498,6 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
        }
 
        /* FDI link */
-       pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
        lane = 0;
        /* CPU eDP doesn't require FDI link, so just set DP M/N
           according to current link config */
@@ -5525,8 +5528,8 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
 
        intel_crtc->fdi_lanes = lane;
 
-       if (pixel_multiplier > 1)
-               link_bw *= pixel_multiplier;
+       if (intel_crtc->config.pixel_multiplier > 1)
+               link_bw *= intel_crtc->config.pixel_multiplier;
        intel_link_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, &m_n);
 
        I915_WRITE(PIPE_DATA_M1(cpu_transcoder), TU_SIZE(m_n.tu) | m_n.gmch_m);
@@ -5536,7 +5539,6 @@ static void ironlake_set_m_n(struct drm_crtc *crtc,
 }
 
 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
-                                     struct drm_display_mode *adjusted_mode,
                                      intel_clock_t *clock, u32 fp)
 {
        struct drm_crtc *crtc = &intel_crtc->base;
@@ -5544,7 +5546,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_encoder *intel_encoder;
        uint32_t dpll;
-       int factor, pixel_multiplier, num_connectors = 0;
+       int factor, num_connectors = 0;
        bool is_lvds = false, is_sdvo = false, is_tv = false;
        bool is_dp = false, is_cpu_edp = false;
 
@@ -5595,9 +5597,9 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
        else
                dpll |= DPLLB_MODE_DAC_SERIAL;
        if (is_sdvo) {
-               pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
-               if (pixel_multiplier > 1) {
-                       dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
+               if (intel_crtc->config.pixel_multiplier > 1) {
+                       dpll |= (intel_crtc->config.pixel_multiplier - 1)
+                               << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
                }
                dpll |= DPLL_DVO_HIGH_SPEED;
        }
@@ -5701,7 +5703,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
                        reduced_clock.m2;
 
-       dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
+       dpll = ironlake_compute_dpll(intel_crtc, &clock, fp);
 
        DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
        drm_mode_debug_printmodeline(mode);
@@ -5755,7 +5757,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 
        /* Note, this also computes intel_crtc->fdi_lanes which is used below in
         * ironlake_check_fdi_lanes. */
-       ironlake_set_m_n(crtc, mode, adjusted_mode);
+       ironlake_set_m_n(crtc);
 
        fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
 
@@ -5871,7 +5873,7 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
        intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
        if (!is_dp || is_cpu_edp)
-               ironlake_set_m_n(crtc, mode, adjusted_mode);
+               ironlake_set_m_n(crtc);
 
        haswell_set_pipeconf(crtc, adjusted_mode, dither);
 
@@ -5924,8 +5926,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
                        encoder->base.base.id,
                        drm_get_encoder_name(&encoder->base),
                        mode->base.id, mode->name);
-               encoder_funcs = encoder->base.helper_private;
-               encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
+               if (encoder->mode_set) {
+                       encoder->mode_set(encoder);
+               } else {
+                       encoder_funcs = encoder->base.helper_private;
+                       encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
+               }
        }
 
        return 0;
index 054032ae2856d3aeb32fad17cf914a1e73cf7f2f..f0e5462c665b8334a02329fe20f8264717822efd 100644 (file)
 #define INTEL_DVO_CHIP_TVOUT 4
 
 /* drm_display_mode->private_flags */
-#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
-#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
 #define INTEL_MODE_DP_FORCE_6BPC (0x10)
 /*
  * Set when limited 16-235 (as opposed to full 0-255) RGB color range is
  */
 #define INTEL_MODE_LIMITED_COLOR_RANGE (0x40)
 
-static inline void
-intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
-                               int multiplier)
-{
-       mode->clock *= multiplier;
-       mode->private_flags |= multiplier;
-}
-
-static inline int
-intel_mode_get_pixel_multiplier(const struct drm_display_mode *mode)
-{
-       return (mode->private_flags & INTEL_MODE_PIXEL_MULTIPLIER_MASK) >> INTEL_MODE_PIXEL_MULTIPLIER_SHIFT;
-}
-
 struct intel_framebuffer {
        struct drm_framebuffer base;
        struct drm_i915_gem_object *obj;
@@ -159,6 +143,7 @@ struct intel_encoder {
        void (*pre_pll_enable)(struct intel_encoder *);
        void (*pre_enable)(struct intel_encoder *);
        void (*enable)(struct intel_encoder *);
+       void (*mode_set)(struct intel_encoder *intel_encoder);
        void (*disable)(struct intel_encoder *);
        void (*post_disable)(struct intel_encoder *);
        /* Read out the current hw state of this connector, returning true if
@@ -205,6 +190,8 @@ struct intel_crtc_config {
         * changes the crtc timings in the mode to prevent the crtc fixup from
         * overwriting them.  Currently only lvds needs that. */
        bool timings_set;
+       /* Used by SDVO (and if we ever fix it, HDMI). */
+       unsigned pixel_multiplier;
 };
 
 struct intel_crtc {
index 8fdd8f82f09d5d1c90c39a55358ae9cff8ebbab0..4d9fedec530a4d083549f9cb36a1f0fdf3d183ec 100644 (file)
@@ -788,7 +788,6 @@ static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd,
        v_sync_offset = mode->vsync_start - mode->vdisplay;
 
        mode_clock = mode->clock;
-       mode_clock /= intel_mode_get_pixel_multiplier(mode) ?: 1;
        mode_clock /= 10;
        dtd->part1.clock = mode_clock;
 
@@ -1041,12 +1040,12 @@ intel_sdvo_get_preferred_input_mode(struct intel_sdvo *intel_sdvo,
        return true;
 }
 
-static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
-                                 const struct drm_display_mode *mode,
-                                 struct drm_display_mode *adjusted_mode)
+static bool intel_sdvo_compute_config(struct intel_encoder *encoder,
+                                     struct intel_crtc_config *pipe_config)
 {
-       struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
-       int multiplier;
+       struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
+       struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+       struct drm_display_mode *mode = &pipe_config->requested_mode;
 
        /* We need to construct preferred input timings based on our
         * output timings.  To do that, we have to set the output
@@ -1073,8 +1072,9 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
        /* Make the CRTC code factor in the SDVO pixel multiplier.  The
         * SDVO device will factor out the multiplier during mode_set.
         */
-       multiplier = intel_sdvo_get_pixel_multiplier(adjusted_mode);
-       intel_mode_set_pixel_multiplier(adjusted_mode, multiplier);
+       pipe_config->pixel_multiplier =
+               intel_sdvo_get_pixel_multiplier(adjusted_mode);
+       adjusted_mode->clock *= pipe_config->pixel_multiplier;
 
        if (intel_sdvo->color_range_auto) {
                /* See CEA-861-E - 5.1 Default Encoding Parameters */
@@ -1093,19 +1093,19 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
        return true;
 }
 
-static void intel_sdvo_mode_set(struct drm_encoder *encoder,
-                               struct drm_display_mode *mode,
-                               struct drm_display_mode *adjusted_mode)
+static void intel_sdvo_mode_set(struct intel_encoder *intel_encoder)
 {
-       struct drm_device *dev = encoder->dev;
+       struct drm_device *dev = intel_encoder->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
-       struct drm_crtc *crtc = encoder->crtc;
+       struct drm_crtc *crtc = intel_encoder->base.crtc;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-       struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
+       struct drm_display_mode *adjusted_mode =
+               &intel_crtc->config.adjusted_mode;
+       struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
+       struct intel_sdvo *intel_sdvo = to_intel_sdvo(&intel_encoder->base);
        u32 sdvox;
        struct intel_sdvo_in_out_map in_out;
        struct intel_sdvo_dtd input_dtd, output_dtd;
-       int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
        int rate;
 
        if (!mode)
@@ -1165,7 +1165,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
                DRM_INFO("Setting input timings on %s failed\n",
                         SDVO_NAME(intel_sdvo));
 
-       switch (pixel_multiplier) {
+       switch (intel_crtc->config.pixel_multiplier) {
        default:
        case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
        case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
@@ -1209,7 +1209,8 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
        } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
                /* done in crtc_mode_set as it lives inside the dpll register */
        } else {
-               sdvox |= (pixel_multiplier - 1) << SDVO_PORT_MULTIPLY_SHIFT;
+               sdvox |= (intel_crtc->config.pixel_multiplier - 1)
+                       << SDVO_PORT_MULTIPLY_SHIFT;
        }
 
        if (input_dtd.part2.sdvo_flags & SDVO_NEED_TO_STALL &&
@@ -2041,8 +2042,6 @@ done:
 }
 
 static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
-       .mode_fixup = intel_sdvo_mode_fixup,
-       .mode_set = intel_sdvo_mode_set,
 };
 
 static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
@@ -2787,7 +2786,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 
        drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
 
+       intel_encoder->compute_config = intel_sdvo_compute_config;
        intel_encoder->disable = intel_disable_sdvo;
+       intel_encoder->mode_set = intel_sdvo_mode_set;
        intel_encoder->enable = intel_enable_sdvo;
        intel_encoder->get_hw_state = intel_sdvo_get_hw_state;