[SCSI] qla2xxx: Unify the read/write sfp mailbox command routines.

Make the read/write sfp mailbox command routines uniform, and remove redundancy.
Also protect against attempting to do a single byte dma in these routines.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 4e51124899fdda2bb834388bbff86889ed3ed849..532313e0725e3f731f9b936756fd64e0b6970fe8 100644 (file)
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -496,8 +496,8 @@ do_read:
                        offset = 0;
                }
 
-               rval = qla2x00_read_sfp(vha, ha->sfp_data_dma, addr, offset,
-                   SFP_BLOCK_SIZE);
+               rval = qla2x00_read_sfp(vha, ha->sfp_data_dma, ha->sfp_data,
+                   addr, offset, SFP_BLOCK_SIZE, 0);
                if (rval != QLA_SUCCESS) {
                        qla_printk(KERN_WARNING, ha,
                            "Unable to read SFP data (%x/%x/%x).\n", rval,
@@ -628,8 +628,8 @@ qla2x00_sysfs_write_edc(struct file *filp, struct kobject *kobj,
 
        memcpy(ha->edc_data, &buf[8], len);
 
-       rval = qla2x00_write_edc(vha, dev, adr, ha->edc_data_dma,
-           ha->edc_data, len, opt);
+       rval = qla2x00_write_sfp(vha, ha->edc_data_dma, ha->edc_data,
+           dev, adr, len, opt);
        if (rval != QLA_SUCCESS) {
                DEBUG2(qla_printk(KERN_INFO, ha,
                    "Unable to write EDC (%x) %02x:%02x:%04x:%02x:%02x.\n",
@@ -685,8 +685,8 @@ qla2x00_sysfs_write_edc_status(struct file *filp, struct kobject *kobj,
                        return -EINVAL;
 
        memset(ha->edc_data, 0, len);
-       rval = qla2x00_read_edc(vha, dev, adr, ha->edc_data_dma,
-           ha->edc_data, len, opt);
+       rval = qla2x00_read_sfp(vha, ha->edc_data_dma, ha->edc_data,
+                       dev, adr, len, opt);
        if (rval != QLA_SUCCESS) {
                DEBUG2(qla_printk(KERN_INFO, ha,
                    "Unable to write EDC status (%x) %02x:%02x:%04x:%02x.\n",

diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 79a12aa978a4bca955eeb2dc50d904b59b1e51e3..0b381224ae4b86e0f575dbd53d6b60254b805f98 100644 (file)
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -323,15 +323,12 @@ extern int
 qla2x00_disable_fce_trace(scsi_qla_host_t *, uint64_t *, uint64_t *);
 
 extern int
-qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t);
+qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *,
+       uint16_t, uint16_t, uint16_t, uint16_t);
 
 extern int
-qla2x00_read_edc(scsi_qla_host_t *, uint16_t, uint16_t, dma_addr_t,
-    uint8_t *, uint16_t, uint16_t);
-
-extern int
-qla2x00_write_edc(scsi_qla_host_t *, uint16_t, uint16_t, dma_addr_t,
-    uint8_t *, uint16_t, uint16_t);
+qla2x00_write_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *,
+       uint16_t, uint16_t, uint16_t, uint16_t);
 
 extern int
 qla2x00_set_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *);

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index aab628bf8d36e86964ed45e57c5c3b6ee1e0becb..7184b870c0d995a0934c53a44b4e4f9c7a2f31b2 100644 (file)
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2786,44 +2786,6 @@ qla2x00_disable_fce_trace(scsi_qla_host_t *vha, uint64_t *wr, uint64_t *rd)
        return rval;
 }
 
-int
-qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint16_t addr,
-    uint16_t off, uint16_t count)
-{
-       int rval;
-       mbx_cmd_t mc;
-       mbx_cmd_t *mcp = &mc;
-
-       if (!IS_FWI2_CAPABLE(vha->hw))
-               return QLA_FUNCTION_FAILED;
-
-       DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
-
-       mcp->mb[0] = MBC_READ_SFP;
-       mcp->mb[1] = addr;
-       mcp->mb[2] = MSW(sfp_dma);
-       mcp->mb[3] = LSW(sfp_dma);
-       mcp->mb[6] = MSW(MSD(sfp_dma));
-       mcp->mb[7] = LSW(MSD(sfp_dma));
-       mcp->mb[8] = count;
-       mcp->mb[9] = off;
-       mcp->mb[10] = 0;
-       mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-       mcp->in_mb = MBX_0;
-       mcp->tov = MBX_TOV_SECONDS;
-       mcp->flags = 0;
-       rval = qla2x00_mailbox_command(vha, mcp);
-
-       if (rval != QLA_SUCCESS) {
-               DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
-                   vha->host_no, rval, mcp->mb[0]));
-       } else {
-               DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
-       }
-
-       return rval;
-}
-
 int
 qla2x00_get_idma_speed(scsi_qla_host_t *vha, uint16_t loop_id,
        uint16_t *port_speed, uint16_t *mb)
@@ -3589,15 +3551,22 @@ qla81xx_restart_mpi_firmware(scsi_qla_host_t *vha)
 }
 
 int
-qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
-    dma_addr_t sfp_dma, uint8_t *sfp, uint16_t len, uint16_t opt)
+qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
+       uint16_t dev, uint16_t off, uint16_t len, uint16_t opt)
 {
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
+       struct qla_hw_data *ha = vha->hw;
+
+       if (!IS_FWI2_CAPABLE(ha))
+               return QLA_FUNCTION_FAILED;
 
        DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
+       if (len == 1)
+               opt |= BIT_0;
+
        mcp->mb[0] = MBC_READ_SFP;
        mcp->mb[1] = dev;
        mcp->mb[2] = MSW(sfp_dma);
@@ -3605,7 +3574,7 @@ qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
        mcp->mb[6] = MSW(MSD(sfp_dma));
        mcp->mb[7] = LSW(MSD(sfp_dma));
        mcp->mb[8] = len;
-       mcp->mb[9] = adr;
+       mcp->mb[9] = off;
        mcp->mb[10] = opt;
        mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_1|MBX_0;
@@ -3614,8 +3583,7 @@ qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
        rval = qla2x00_mailbox_command(vha, mcp);
 
        if (opt & BIT_0)
-               if (sfp)
-                       *sfp = mcp->mb[1];
+               *sfp = mcp->mb[1];
 
        if (rval != QLA_SUCCESS) {
                DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
@@ -3628,18 +3596,24 @@ qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
 }
 
 int
-qla2x00_write_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
-    dma_addr_t sfp_dma, uint8_t *sfp, uint16_t len, uint16_t opt)
+qla2x00_write_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
+       uint16_t dev, uint16_t off, uint16_t len, uint16_t opt)
 {
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
+       struct qla_hw_data *ha = vha->hw;
+
+       if (!IS_FWI2_CAPABLE(ha))
+               return QLA_FUNCTION_FAILED;
 
        DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
+       if (len == 1)
+               opt |= BIT_0;
+
        if (opt & BIT_0)
-               if (sfp)
-                       len = *sfp;
+               len = *sfp;
 
        mcp->mb[0] = MBC_WRITE_SFP;
        mcp->mb[1] = dev;
@@ -3648,10 +3622,10 @@ qla2x00_write_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
        mcp->mb[6] = MSW(MSD(sfp_dma));
        mcp->mb[7] = LSW(MSD(sfp_dma));
        mcp->mb[8] = len;
-       mcp->mb[9] = adr;
+       mcp->mb[9] = off;
        mcp->mb[10] = opt;
        mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-       mcp->in_mb = MBX_0;
+       mcp->in_mb = MBX_1|MBX_0;
        mcp->tov = MBX_TOV_SECONDS;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(vha, mcp);