gpio/samsung: Add device tree support for EXYNOS4

As gpio chips get registered, a device tree node which represents the
gpio chip is searched and attached to it. A translate function is also
provided to convert the gpio specifier into actual platform settings
for pin function selection, pull up/down and driver strength settings.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
[kgene.kim@samsung.com: fixed build error]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
new file mode 100644 (file)
index 0000000..8f50fe5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
@@ -0,0 +1,40 @@
+Samsung Exynos4 GPIO Controller
+
+Required properties:
+- compatible: Compatible property value should be "samsung,exynos4-gpio>".
+
+- reg: Physical base address of the controller and length of memory mapped
+  region.
+
+- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
+  should be the following with values derived from the SoC user manual.
+     <[phandle of the gpio controller node]
+      [pin number within the gpio controller]
+      [mux function]
+      [pull up/down]
+      [drive strength]>
+
+  Values for gpio specifier:
+  - Pin number: is a value between 0 to 7.
+  - Pull Up/Down: 0 - Pull Up/Down Disabled.
+                  1 - Pull Down Enabled.
+                  3 - Pull Up Enabled.
+  - Drive Strength: 0 - 1x,
+                    1 - 3x,
+                    2 - 2x,
+                    3 - 4x
+
+- gpio-controller: Specifies that the node is a gpio controller.
+- #address-cells: should be 1.
+- #size-cells: should be 1.
+
+Example:
+
+       gpa0: gpio-controller@11400000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "samsung,exynos4-gpio";
+               reg = <0x11400000 0x20>;
+               #gpio-cells = <4>;
+               gpio-controller;
+       };

diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 866251852719c2723868eefd94443f362c952210..6b4d23fd158eb599a9167ae30a441fb63796d72c 100644 (file)
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -24,6 +24,9 @@
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
 #include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
 
 #include <asm/irq.h>
 
@@ -2374,6 +2377,63 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = {
 #endif
 };
 
+#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF)
+static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np,
+                             const void *gpio_spec, u32 *flags)
+{
+       const __be32 *gpio = gpio_spec;
+       const u32 n = be32_to_cpup(gpio);
+       unsigned int pin = gc->base + be32_to_cpu(gpio[0]);
+
+       if (WARN_ON(gc->of_gpio_n_cells < 4))
+               return -EINVAL;
+
+       if (n > gc->ngpio)
+               return -EINVAL;
+
+       if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1]))))
+               pr_warn("gpio_xlate: failed to set pin function\n");
+       if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2])))
+               pr_warn("gpio_xlate: failed to set pin pull up/down\n");
+       if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3])))
+               pr_warn("gpio_xlate: failed to set pin drive strength\n");
+
+       return n;
+}
+
+static const struct of_device_id exynos4_gpio_dt_match[] __initdata = {
+       { .compatible = "samsung,exynos4-gpio", },
+       {}
+};
+
+static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+                                                u64 base, u64 offset)
+{
+       struct gpio_chip *gc =  &chip->chip;
+       u64 address;
+
+       if (!of_have_populated_dt())
+               return;
+
+       address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
+       gc->of_node = of_find_matching_node_by_address(NULL,
+                       exynos4_gpio_dt_match, address);
+       if (!gc->of_node) {
+               pr_info("gpio: device tree node not found for gpio controller"
+                       " with base address %08llx\n", address);
+               return;
+       }
+       gc->of_gpio_n_cells = 4;
+       gc->of_xlate = exynos4_gpio_xlate;
+}
+#elif defined(CONFIG_ARCH_EXYNOS4)
+static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+                                                u64 base, u64 offset)
+{
+       return;
+}
+#endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */
+
 /* TODO: cleanup soc_is_* */
 static __init int samsung_gpiolib_init(void)
 {
@@ -2455,6 +2515,10 @@ static __init int samsung_gpiolib_init(void)
                                chip->config = &exynos4_gpio_cfg;
                                chip->group = group++;
                        }
+#ifdef CONFIG_CPU_EXYNOS4210
+                       exynos4_gpiolib_attach_ofnode(chip,
+                                       EXYNOS4_PA_GPIO1, i * 0x20);
+#endif
                }
                samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
 
@@ -2467,6 +2531,10 @@ static __init int samsung_gpiolib_init(void)
                                chip->config = &exynos4_gpio_cfg;
                                chip->group = group++;
                        }
+#ifdef CONFIG_CPU_EXYNOS4210
+                       exynos4_gpiolib_attach_ofnode(chip,
+                                       EXYNOS4_PA_GPIO2, i * 0x20);
+#endif
                }
                samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
 
@@ -2479,6 +2547,10 @@ static __init int samsung_gpiolib_init(void)
                                chip->config = &exynos4_gpio_cfg;
                                chip->group = group++;
                        }
+#ifdef CONFIG_CPU_EXYNOS4210
+                       exynos4_gpiolib_attach_ofnode(chip,
+                                       EXYNOS4_PA_GPIO3, i * 0x20);
+#endif
                }
                samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);