/* by default we allow the insn since we don't have checks for
* all possible cases yet */
default:
- rt_printk("comedi: no check for data length of config insn id "
+ printk("comedi: no check for data length of config insn id "
"%i is implemented.\n"
" Add a check to %s in %s.\n"
" Assuming n=%i is correct.\n", data[0], __func__,
return -EINVAL;
s = dev->subdevices + arg;
- comedi_spin_lock_irqsave(&s->spin_lock, flags);
+ spin_lock_irqsave(&s->spin_lock, flags);
if (s->busy || s->lock)
ret = -EBUSY;
else
s->lock = file;
- comedi_spin_unlock_irqrestore(&s->spin_lock, flags);
+ spin_unlock_irqrestore(&s->spin_lock, flags);
if (ret < 0)
return ret;
void comedi_error(const struct comedi_device *dev, const char *s)
{
- rt_printk("comedi%d: %s: %s\n", dev->minor, dev->driver->driver_name,
- s);
+ printk("comedi%d: %s: %s\n", dev->minor, dev->driver->driver_name, s);
}
void comedi_event(struct comedi_device *dev, struct comedi_subdevice *s)
{
unsigned long flags;
- comedi_spin_lock_irqsave(&s->spin_lock, flags);
+ spin_lock_irqsave(&s->spin_lock, flags);
s->runflags &= ~mask;
s->runflags |= (bits & mask);
- comedi_spin_unlock_irqrestore(&s->spin_lock, flags);
+ spin_unlock_irqrestore(&s->spin_lock, flags);
}
unsigned comedi_get_subdevice_runflags(struct comedi_subdevice *s)
unsigned long flags;
unsigned runflags;
- comedi_spin_lock_irqsave(&s->spin_lock, flags);
+ spin_lock_irqsave(&s->spin_lock, flags);
runflags = s->runflags;
- comedi_spin_unlock_irqrestore(&s->spin_lock, flags);
+ spin_unlock_irqrestore(&s->spin_lock, flags);
return runflags;
}
return -ENOMEM;
}
comedi_device_init(info->device);
- comedi_spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+ spin_lock_irqsave(&comedi_file_info_table_lock, flags);
for (i = 0; i < COMEDI_NUM_BOARD_MINORS; ++i) {
if (comedi_file_info_table[i] == NULL) {
comedi_file_info_table[i] = info;
break;
}
}
- comedi_spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+ spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
if (i == COMEDI_NUM_BOARD_MINORS) {
comedi_device_cleanup(info->device);
kfree(info->device);
struct comedi_device_file_info *info;
BUG_ON(minor >= COMEDI_NUM_BOARD_MINORS);
- comedi_spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+ spin_lock_irqsave(&comedi_file_info_table_lock, flags);
info = comedi_file_info_table[minor];
comedi_file_info_table[minor] = NULL;
- comedi_spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+ spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
if (info) {
struct comedi_device *dev = info->device;
info->device = dev;
info->read_subdevice = s;
info->write_subdevice = s;
- comedi_spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+ spin_lock_irqsave(&comedi_file_info_table_lock, flags);
for (i = COMEDI_FIRST_SUBDEVICE_MINOR; i < COMEDI_NUM_MINORS; ++i) {
if (comedi_file_info_table[i] == NULL) {
comedi_file_info_table[i] = info;
break;
}
}
- comedi_spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+ spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
if (i == COMEDI_NUM_MINORS) {
kfree(info);
printk(KERN_ERR "comedi: error: ran out of minor numbers for board device files.\n");
BUG_ON(s->minor >= COMEDI_NUM_MINORS);
BUG_ON(s->minor < COMEDI_FIRST_SUBDEVICE_MINOR);
- comedi_spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+ spin_lock_irqsave(&comedi_file_info_table_lock, flags);
info = comedi_file_info_table[s->minor];
comedi_file_info_table[s->minor] = NULL;
- comedi_spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+ spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
if (s->class_dev) {
device_destroy(comedi_class, MKDEV(COMEDI_MAJOR, s->minor));
struct comedi_device_file_info *info;
BUG_ON(minor >= COMEDI_NUM_MINORS);
- comedi_spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+ spin_lock_irqsave(&comedi_file_info_table_lock, flags);
info = comedi_file_info_table[minor];
- comedi_spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+ spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
return info;
}
block_size = num_bytes - count;
if (block_size < 0) {
- rt_printk("%s: %s: bug! block_size is negative\n",
+ printk("%s: %s: bug! block_size is negative\n",
__FILE__, __func__);
break;
}
{
if ((int)(async->buf_write_count + nbytes -
async->buf_write_alloc_count) > 0) {
- rt_printk
- ("comedi: attempted to write-free more bytes than have been write-allocated.\n");
+ printk("comedi: attempted to write-free more bytes than have been write-allocated.\n");
nbytes = async->buf_write_alloc_count - async->buf_write_count;
}
async->buf_write_count += nbytes;
smp_mb();
if ((int)(async->buf_read_count + nbytes -
async->buf_read_alloc_count) > 0) {
- rt_printk
- ("comedi: attempted to read-free more bytes than have been read-allocated.\n");
+ printk("comedi: attempted to read-free more bytes than have been read-allocated.\n");
nbytes = async->buf_read_alloc_count - async->buf_read_count;
}
async->buf_read_count += nbytes;
*card = amcc;
return 0; /* ok, card is found */
} else {
- rt_printk(" - \nCard on requested position is used b:s %d:%d!\n",
+ printk(" - \nCard on requested position is used b:s %d:%d!\n",
pci_bus, pci_slot);
return 2; /* card exist but is used */
}
/* use autodetection */
card = ptr_find_free_pci_card_by_device(vendor_id, device_id);
if (card == NULL) {
- rt_printk(" - Unused card not found in system!\n");
+ printk(" - Unused card not found in system!\n");
return NULL;
}
} else {
pci_bus, pci_slot,
&card)) {
case 1:
- rt_printk(" - Card not found on requested position b:s %d:%d!\n",
+ printk(" - Card not found on requested position b:s %d:%d!\n",
pci_bus, pci_slot);
return NULL;
case 2:
- rt_printk(" - Card on requested position is used b:s %d:%d!\n",
+ printk(" - Card on requested position is used b:s %d:%d!\n",
pci_bus, pci_slot);
return NULL;
}
}
if (pci_card_alloc(card, i_Master) != 0) {
- rt_printk(" - Can't allocate card!\n");
+ printk(" - Can't allocate card!\n");
return NULL;
}
v_pci_card_list_init(this_board->i_VendorId, 1); /* 1 for displaying the list.. */
pci_list_builded = 1;
}
- /* rt_printk("comedi%d: addi_common: board=%s",dev->minor,this_board->pc_DriverName); */
+ /* printk("comedi%d: addi_common: board=%s",dev->minor,this_board->pc_DriverName); */
if ((this_board->i_Dma) && (it->options[2] == 0)) {
i_Dma = 1;
/* ## */
if (irq > 0) {
- if (comedi_request_irq(irq, v_ADDI_Interrupt, IRQF_SHARED,
+ if (request_irq(irq, v_ADDI_Interrupt, IRQF_SHARED,
c_Identifier, dev) < 0) {
printk(", unable to allocate IRQ %u, DISABLING IT",
irq);
irq = 0; /* Can't use IRQ */
} else {
- rt_printk("\nirq=%u", irq);
+ printk("\nirq=%u", irq);
}
} else {
- rt_printk(", IRQ disabled");
+ printk(", IRQ disabled");
}
printk("\nOption %d %d %d\n", it->options[0], it->options[1],
}
}
if (!devpriv->ul_DmaBufferVirtual[0]) {
- rt_printk
+ printk
(", Can't allocate DMA buffer, DMA disabled!");
devpriv->us_UseDma = ADDI_DISABLE;
}
}
if ((devpriv->us_UseDma == ADDI_ENABLE)) {
- rt_printk("\nDMA ENABLED\n");
+ printk("\nDMA ENABLED\n");
} else {
printk("\nDMA DISABLED\n");
}
}
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
if ((devpriv->ps_BoardInfo->pc_EepromChip == NULL)
*card = amcc;
return 0; /* ok, card is found */
} else {
- rt_printk
+ printk
(" - \nCard on requested position is used b:s %d:%d!\n",
pci_bus, pci_slot);
return 2; /* card exist but is used */
if ((pci_bus < 1) & (pci_slot < 1)) { /* use autodetection */
card = ptr_find_free_pci_card_by_device(vendor_id, device_id);
if (card == NULL) {
- rt_printk(" - Unused card not found in system!\n");
+ printk(" - Unused card not found in system!\n");
return NULL;
}
} else {
pci_bus, pci_slot,
&card)) {
case 1:
- rt_printk
+ printk
(" - Card not found on requested position b:s %d:%d!\n",
pci_bus, pci_slot);
return NULL;
case 2:
- rt_printk
+ printk
(" - Card on requested position is used b:s %d:%d!\n",
pci_bus, pci_slot);
return NULL;
}
if (i_pci_card_alloc(card) != 0) {
- rt_printk(" - Can't allocate card!\n");
+ printk(" - Can't allocate card!\n");
return NULL;
}
}
/*
- * out put n values at the given channel. rt_printk("\nwaiting for
+ * out put n values at the given channel. printk("\nwaiting for
* DA_READY BIT");
*/
do /* Waiting of DA_READY BIT */
PCI9111_8254_READ_LOAD_LSB_MSB |
PCI9111_8254_MODE_2 | PCI9111_8254_BINARY_COUNTER);
- comedi_udelay(1);
+ udelay(1);
pci9111_8254_counter_2_set(dev_private->timer_divisor_2);
pci9111_8254_counter_1_set(dev_private->timer_divisor_1);
async = subdevice->async;
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
/* Check if we are source of interrupt */
intcsr = inb(dev_private->lcr_io_base +
PLX9050_LINTI2_STATUS))))) {
/* Not the source of the interrupt. */
/* (N.B. not using PLX9050_SOFTWARE_INTERRUPT) */
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
return IRQ_NONE;
}
/* Interrupt comes from fifo_half-full signal */
if (pci9111_is_fifo_full()) {
- comedi_spin_unlock_irqrestore(&dev->spinlock,
+ spin_unlock_irqrestore(&dev->spinlock,
irq_flags);
comedi_error(dev, PCI9111_DRIVER_NAME " fifo overflow");
pci9111_interrupt_clear();
pci9111_interrupt_clear();
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
comedi_event(dev, subdevice);
dev->irq = 0;
if (pci_device->irq > 0) {
- if (comedi_request_irq(pci_device->irq,
- pci9111_interrupt,
+ if (request_irq(pci_device->irq, pci9111_interrupt,
IRQF_SHARED, PCI9111_DRIVER_NAME, dev) != 0) {
printk("comedi%d: unable to allocate irq %u\n",
dev->minor, pci_device->irq);
/* Release previously allocated irq */
if (dev->irq != 0) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
if (dev_private != 0 && dev_private->pci_device != 0) {
#undef DPRINTK
#ifdef PCI9118_EXTDEBUG
-#define DPRINTK(fmt, args...) rt_printk(fmt, ## args)
+#define DPRINTK(fmt, args...) printk(fmt, ## args)
#else
#define DPRINTK(fmt, args...)
#endif
for (n = 0; n < insn->n; n++) {
outw(0, dev->iobase + PCI9118_SOFTTRG); /* start conversion */
- comedi_udelay(2);
+ udelay(2);
timeout = 100;
while (timeout--) {
if (inl(dev->iobase + PCI9118_ADSTAT) & AdStatus_ADrdy)
goto conv_finish;
- comedi_udelay(1);
+ udelay(1);
}
comedi_error(dev, "A/D insn timeout");
#ifdef PCI9118_PARANOIDCHECK
if (devpriv->ai16bits == 0) {
if ((sampl & 0x000f) != devpriv->chanlist[s->async->cur_chan]) { /* data dropout! */
- rt_printk
+ printk
("comedi: A/D SAMPL - data dropout: received channel %d, expected %d!\n",
sampl & 0x000f,
devpriv->chanlist[s->async->cur_chan]);
if (cmd->scan_begin_src == TRIG_TIMER) {
tmp = cmd->scan_begin_arg;
-/* rt_printk("S1 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
+/* printk("S1 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, &divisor1,
&divisor2, &cmd->scan_begin_arg,
cmd->flags & TRIG_ROUND_MASK);
-/* rt_printk("S2 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
+/* printk("S2 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
if (cmd->scan_begin_arg < this_board->ai_ns_min)
cmd->scan_begin_arg = this_board->ai_ns_min;
if (tmp != cmd->scan_begin_arg)
i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, &divisor1,
&divisor2, &cmd->convert_arg,
cmd->flags & TRIG_ROUND_MASK);
-/* rt_printk("s1 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
+/* printk("s1 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
if (cmd->convert_arg < this_board->ai_ns_min)
cmd->convert_arg = this_board->ai_ns_min;
if (tmp != cmd->convert_arg)
cmd->scan_begin_arg =
this_board->ai_ns_min *
(cmd->scan_end_arg + 2);
-/* rt_printk("s2 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
+/* printk("s2 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
err++;
}
} else {
cmd->scan_begin_arg =
cmd->convert_arg *
cmd->chanlist_len;
-/* rt_printk("s3 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
+/* printk("s3 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
err++;
}
}
if (dmalen0 < (devpriv->ai_n_realscanlen << 1)) {
/* uff, too short DMA buffer, disable EOS support! */
devpriv->ai_flags &= (~TRIG_WAKE_EOS);
- rt_printk
+ printk
("comedi%d: WAR: DMA0 buf too short, cann't support TRIG_WAKE_EOS (%d<%d)\n",
dev->minor, dmalen0,
devpriv->ai_n_realscanlen << 1);
if (devpriv->useeoshandle)
dmalen0 += 2;
if (dmalen0 < 4) {
- rt_printk
+ printk
("comedi%d: ERR: DMA0 buf len bug? (%d<4)\n",
dev->minor, dmalen0);
dmalen0 = 4;
if (dmalen1 < (devpriv->ai_n_realscanlen << 1)) {
/* uff, too short DMA buffer, disable EOS support! */
devpriv->ai_flags &= (~TRIG_WAKE_EOS);
- rt_printk
+ printk
("comedi%d: WAR: DMA1 buf too short, cann't support TRIG_WAKE_EOS (%d<%d)\n",
dev->minor, dmalen1,
devpriv->ai_n_realscanlen << 1);
if (devpriv->useeoshandle)
dmalen1 -= 2;
if (dmalen1 < 4) {
- rt_printk
+ printk
("comedi%d: ERR: DMA1 buf len bug? (%d<4)\n",
dev->minor, dmalen1);
dmalen1 = 4;
outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);
devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg; /* positive triggers, no S&H, no burst, burst stop, no post trigger, no about trigger, trigger stop */
outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
- comedi_udelay(1);
+ udelay(1);
outl(0, dev->iobase + PCI9118_DELFIFO); /* flush FIFO */
inl(dev->iobase + PCI9118_ADSTAT); /* flush A/D and INT status register */
inl(dev->iobase + PCI9118_INTSRC);
return 0;
}
if ((frontadd + n_chan + backadd) > s->len_chanlist) {
- rt_printk
+ printk
("comedi%d: range/channel list is too long for actual configuration (%d>%d)!",
dev->minor, n_chan,
s->len_chanlist - frontadd - backadd);
#endif
#endif
outl(0, dev->iobase + PCI9118_SCANMOD); /* close scan queue */
-/* comedi_udelay(100); important delay, or first sample will be cripled */
+/* udelay(100); important delay, or first sample will be cripled */
DPRINTK("adl_pci9118 EDBG: END: setup_channel_list()\n");
return 1; /* we can serve this with scan logic */
outl(0x74, dev->iobase + PCI9118_CNTCTRL);
outl(0xb4, dev->iobase + PCI9118_CNTCTRL);
/* outl(0x30, dev->iobase + PCI9118_CNTCTRL); */
- comedi_udelay(1);
+ udelay(1);
if ((mode == 1) || (mode == 2) || (mode == 4)) {
outl(divisor2 & 0xff, dev->iobase + PCI9118_CNT2);
outl(devpriv->ao_data[0], dev->iobase + PCI9118_DA1); /* reset A/D outs to 0V */
outl(devpriv->ao_data[1], dev->iobase + PCI9118_DA2);
outl(0, dev->iobase + PCI9118_DO); /* reset digi outs to L */
- comedi_udelay(10);
+ udelay(10);
inl(dev->iobase + PCI9118_AD_DATA);
outl(0, dev->iobase + PCI9118_DELFIFO); /* flush FIFO */
outl(0, dev->iobase + PCI9118_INTSRC); /* remove INT requests */
unsigned char pci_bus, pci_slot, pci_func;
u16 u16w;
- rt_printk("comedi%d: adl_pci9118: board=%s", dev->minor,
+ printk("comedi%d: adl_pci9118: board=%s", dev->minor,
this_board->name);
opt_bus = it->options[0];
ret = alloc_private(dev, sizeof(struct pci9118_private));
if (ret < 0) {
- rt_printk(" - Allocation failed!\n");
+ printk(" - Allocation failed!\n");
return -ENOMEM;
}
if (!pcidev) {
if (opt_bus || opt_slot) {
- rt_printk(" - Card at b:s %d:%d %s\n",
+ printk(" - Card at b:s %d:%d %s\n",
opt_bus, opt_slot, errstr);
} else {
- rt_printk(" - Card %s\n", errstr);
+ printk(" - Card %s\n", errstr);
}
return -EIO;
}
iobase_a = pci_resource_start(pcidev, 0);
iobase_9 = pci_resource_start(pcidev, 2);
- rt_printk(", b:s:f=%d:%d:%d, io=0x%4lx, 0x%4lx", pci_bus, pci_slot,
+ printk(", b:s:f=%d:%d:%d, io=0x%4lx, 0x%4lx", pci_bus, pci_slot,
pci_func, iobase_9, iobase_a);
dev->iobase = iobase_9;
if (it->options[3] & 2)
irq = 0; /* user don't want use IRQ */
if (irq > 0) {
- if (comedi_request_irq(irq, interrupt_pci9118, IRQF_SHARED,
+ if (request_irq(irq, interrupt_pci9118, IRQF_SHARED,
"ADLink PCI-9118", dev)) {
- rt_printk(", unable to allocate IRQ %d, DISABLING IT",
+ printk(", unable to allocate IRQ %d, DISABLING IT",
irq);
irq = 0; /* Can't use IRQ */
} else {
- rt_printk(", irq=%u", irq);
+ printk(", irq=%u", irq);
}
} else {
- rt_printk(", IRQ disabled");
+ printk(", IRQ disabled");
}
dev->irq = irq;
}
}
if (!devpriv->dmabuf_virt[0]) {
- rt_printk(", Can't allocate DMA buffer, DMA disabled!");
+ printk(", Can't allocate DMA buffer, DMA disabled!");
master = 0;
}
devpriv->master = master;
if (devpriv->master)
- rt_printk(", bus master");
+ printk(", bus master");
else
- rt_printk(", no bus master");
+ printk(", no bus master");
devpriv->usemux = 0;
if (it->options[2] > 0) {
if (devpriv->usemux > 128) {
devpriv->usemux = 128; /* max 128 channels with softare S&H! */
}
- rt_printk(", ext. mux %d channels", devpriv->usemux);
+ printk(", ext. mux %d channels", devpriv->usemux);
}
devpriv->softsshdelay = it->options[4];
devpriv->softsshhold = 0x80;
}
- rt_printk(".\n");
+ printk(".\n");
pci_read_config_word(devpriv->pcidev, PCI_COMMAND, &u16w);
pci_write_config_word(devpriv->pcidev, PCI_COMMAND, u16w | 64); /* Enable parity check for parity error */
if (devpriv->valid)
pci9118_reset(dev);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (devpriv->pcidev) {
if (dev->iobase) {
comedi_pci_disable(devpriv->pcidev);
channel = CR_CHAN(insn->chanspec);
if (channel != devpriv->last_channel || range != devpriv->last_range) {
outb((range << 4) | channel, dev->iobase + ADQ12B_CTREG);
- comedi_udelay(50); /* wait for the mux to settle */
+ udelay(50); /* wait for the mux to settle */
}
/* trigger conversion */
/* wait for end of convertion */
i = 0;
do {
-/* comedi_udelay(1); */
+/* udelay(1); */
status = inb(dev->iobase + ADQ12B_STINR);
status = status & ADQ12B_EOC;
} while (status == 0 && ++i < TIMEOUT);
hi = inb(dev->iobase + ADQ12B_ADHIG);
lo = inb(dev->iobase + ADQ12B_ADLOW);
- /* rt_printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n", channel, range, status, hi, lo); */
+ /* printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n", channel, range, status, hi, lo); */
data[n] = (hi << 8) | lo;
}
#undef DPRINTK
#ifdef PCI171X_EXTDEBUG
-#define DPRINTK(fmt, args...) rt_printk(fmt, ## args)
+#define DPRINTK(fmt, args...) printk(fmt, ## args)
#else
#define DPRINTK(fmt, args...)
#endif
outw(0, dev->iobase + PCI171x_SOFTTRG); /* start conversion */
DPRINTK("adv_pci1710 B n=%d ST=%4x\n", n,
inw(dev->iobase + PCI171x_STATUS));
- /* comedi_udelay(1); */
+ /* udelay(1); */
DPRINTK("adv_pci1710 C n=%d ST=%4x\n", n,
inw(dev->iobase + PCI171x_STATUS));
timeout = 100;
DPRINTK("adv_pci1710 EDBG: BGN: interrupt_pci1710_every_sample(...)\n");
m = inw(dev->iobase + PCI171x_STATUS);
if (m & Status_FE) {
- rt_printk("comedi%d: A/D FIFO empty (%4x)\n", dev->minor, m);
+ printk("comedi%d: A/D FIFO empty (%4x)\n", dev->minor, m);
pci171x_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
return;
}
if (m & Status_FF) {
- rt_printk
+ printk
("comedi%d: A/D FIFO Full status (Fatal Error!) (%4x)\n",
dev->minor, m);
pci171x_ai_cancel(dev, s);
if (this_board->cardtype != TYPE_PCI1713)
if ((sampl & 0xf000) !=
devpriv->act_chanlist[s->async->cur_chan]) {
- rt_printk
+ printk
("comedi: A/D data dropout: received data from channel %d, expected %d!\n",
(sampl & 0xf000) >> 12,
(devpriv->act_chanlist[s->async->
sampl = inw(dev->iobase + PCI171x_AD_DATA);
if (this_board->cardtype != TYPE_PCI1713)
if ((sampl & 0xf000) != devpriv->act_chanlist[j]) {
- rt_printk
+ printk
("comedi%d: A/D FIFO data dropout: received data from channel %d, expected %d! (%d/%d/%d/%d/%d/%4x)\n",
dev->minor, (sampl & 0xf000) >> 12,
(devpriv->
DPRINTK("adv_pci1710 EDBG: BGN: interrupt_pci1710_half_fifo(...)\n");
m = inw(dev->iobase + PCI171x_STATUS);
if (!(m & Status_FH)) {
- rt_printk("comedi%d: A/D FIFO not half full! (%4x)\n",
+ printk("comedi%d: A/D FIFO not half full! (%4x)\n",
dev->minor, m);
pci171x_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
return;
}
if (m & Status_FF) {
- rt_printk
+ printk
("comedi%d: A/D FIFO Full status (Fatal Error!) (%4x)\n",
dev->minor, m);
pci171x_ai_cancel(dev, s);
*/
static void pci171x_cmdtest_out(int e, struct comedi_cmd *cmd)
{
- rt_printk("adv_pci1710 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
+ printk("adv_pci1710 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
cmd->start_src, cmd->scan_begin_src, cmd->convert_src);
- rt_printk("adv_pci1710 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
+ printk("adv_pci1710 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg);
- rt_printk("adv_pci1710 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
+ printk("adv_pci1710 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
cmd->scan_end_src);
- rt_printk("adv_pci1710 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n",
+ printk("adv_pci1710 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n",
e, cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
}
#endif
if (n_chan > 1) {
chansegment[0] = chanlist[0]; /* first channel is everytime ok */
for (i = 1, seglen = 1; i < n_chan; i++, seglen++) { /* build part of chanlist */
- /* rt_printk("%d. %d %d\n",i,CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i])); */
+ /* printk("%d. %d %d\n",i,CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i])); */
if (chanlist[0] == chanlist[i])
break; /* we detect loop, this must by finish */
if (CR_CHAN(chanlist[i]) & 1) /* odd channel cann't by differencial */
if (CR_AREF(chansegment[i - 1]) == AREF_DIFF)
nowmustbechan = (nowmustbechan + 1) % s->n_chan;
if (nowmustbechan != CR_CHAN(chanlist[i])) { /* channel list isn't continous :-( */
- rt_printk
+ printk
("channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
i, CR_CHAN(chanlist[i]), nowmustbechan,
CR_CHAN(chanlist[0]));
}
for (i = 0, segpos = 0; i < n_chan; i++) { /* check whole chanlist */
- /* rt_printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i])); */
+ /* printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i])); */
if (chanlist[i] != chansegment[i % seglen]) {
- rt_printk
+ printk
("bad channel, reference or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
i, CR_CHAN(chansegment[i]),
CR_RANGE(chansegment[i]),
int i;
int board_index;
- rt_printk("comedi%d: adv_pci1710: ", dev->minor);
+ printk("comedi%d: adv_pci1710: ", dev->minor);
opt_bus = it->options[0];
opt_slot = it->options[1];
ret = alloc_private(dev, sizeof(struct pci1710_private));
if (ret < 0) {
- rt_printk(" - Allocation failed!\n");
+ printk(" - Allocation failed!\n");
return -ENOMEM;
}
if (!pcidev) {
if (opt_bus || opt_slot) {
- rt_printk(" - Card at b:s %d:%d %s\n",
+ printk(" - Card at b:s %d:%d %s\n",
opt_bus, opt_slot, errstr);
} else {
- rt_printk(" - Card %s\n", errstr);
+ printk(" - Card %s\n", errstr);
}
return -EIO;
}
irq = pcidev->irq;
iobase = pci_resource_start(pcidev, 2);
- rt_printk(", b:s:f=%d:%d:%d, io=0x%4lx", pci_bus, pci_slot, pci_func,
+ printk(", b:s:f=%d:%d:%d, io=0x%4lx", pci_bus, pci_slot, pci_func,
iobase);
dev->iobase = iobase;
ret = alloc_subdevices(dev, n_subdevices);
if (ret < 0) {
- rt_printk(" - Allocation failed!\n");
+ printk(" - Allocation failed!\n");
return ret;
}
if (this_board->have_irq) {
if (irq) {
- if (comedi_request_irq(irq, interrupt_service_pci1710,
+ if (request_irq(irq, interrupt_service_pci1710,
IRQF_SHARED, "Advantech PCI-1710",
dev)) {
- rt_printk
+ printk
(", unable to allocate IRQ %d, DISABLING IT",
irq);
irq = 0; /* Can't use IRQ */
} else {
- rt_printk(", irq=%u", irq);
+ printk(", irq=%u", irq);
}
} else {
- rt_printk(", IRQ disabled");
+ printk(", IRQ disabled");
}
} else {
irq = 0;
if (devpriv->valid)
pci1710_reset(dev);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (devpriv->pcidev) {
if (dev->iobase) {
comedi_pci_disable(devpriv->pcidev);
int opt_bus, opt_slot;
const char *errstr;
- rt_printk("comedi%d: adv_pci1723: board=%s", dev->minor,
+ printk("comedi%d: adv_pci1723: board=%s", dev->minor,
this_board->name);
opt_bus = it->options[0];
ret = alloc_private(dev, sizeof(struct pci1723_private));
if (ret < 0) {
- rt_printk(" - Allocation failed!\n");
+ printk(" - Allocation failed!\n");
return -ENOMEM;
}
if (!pcidev) {
if (opt_bus || opt_slot) {
- rt_printk(" - Card at b:s %d:%d %s\n",
+ printk(" - Card at b:s %d:%d %s\n",
opt_bus, opt_slot, errstr);
} else {
- rt_printk(" - Card %s\n", errstr);
+ printk(" - Card %s\n", errstr);
}
return -EIO;
}
pci_func = PCI_FUNC(pcidev->devfn);
iobase = pci_resource_start(pcidev, 2);
- rt_printk(", b:s:f=%d:%d:%d, io=0x%4x", pci_bus, pci_slot, pci_func,
+ printk(", b:s:f=%d:%d:%d, io=0x%4x", pci_bus, pci_slot, pci_func,
iobase);
dev->iobase = iobase;
ret = alloc_subdevices(dev, n_subdevices);
if (ret < 0) {
- rt_printk(" - Allocation failed!\n");
+ printk(" - Allocation failed!\n");
return ret;
}
#undef DPRINTK
#ifdef PCI_DIO_EXTDEBUG
-#define DPRINTK(fmt, args...) rt_printk(fmt, ## args)
+#define DPRINTK(fmt, args...) printk(fmt, ## args)
#else
#define DPRINTK(fmt, args...)
#endif
ok = 1;
break;
}
- comedi_udelay(1);
+ udelay(1);
}
if (ok)
return 0;
unsigned long iobase;
struct pci_dev *pcidev;
- rt_printk("comedi%d: adv_pci_dio: ", dev->minor);
+ printk("comedi%d: adv_pci_dio: ", dev->minor);
ret = alloc_private(dev, sizeof(struct pci_dio_private));
if (ret < 0) {
- rt_printk(", Error: Cann't allocate private memory!\n");
+ printk(", Error: Cann't allocate private memory!\n");
return -ENOMEM;
}
}
if (!dev->board_ptr) {
- rt_printk
+ printk
(", Error: Requested type of the card was not found!\n");
return -EIO;
}
if (comedi_pci_enable(pcidev, driver_pci_dio.driver_name)) {
- rt_printk
+ printk
(", Error: Can't enable PCI device and request regions!\n");
return -EIO;
}
iobase = pci_resource_start(pcidev, this_board->main_pci_region);
- rt_printk(", b:s:f=%d:%d:%d, io=0x%4lx",
+ printk(", b:s:f=%d:%d:%d, io=0x%4lx",
pcidev->bus->number, PCI_SLOT(pcidev->devfn),
PCI_FUNC(pcidev->devfn), iobase);
ret = alloc_subdevices(dev, n_subdevices);
if (ret < 0) {
- rt_printk(", Error: Cann't allocate subdevice memory!\n");
+ printk(", Error: Cann't allocate subdevice memory!\n");
return ret;
}
- rt_printk(".\n");
+ printk(".\n");
subdev = 0;
!(inb(dev->iobase + AIO12_8_STATUS) & STATUS_ADC_EOC)) {
timeout--;
printk("timeout %d\n", timeout);
- comedi_udelay(1);
+ udelay(1);
}
if (timeout == 0) {
comedi_error(dev, "ADC timeout");
subpriv = s->private;
- comedi_spin_lock_irqsave(&subpriv->spinlock, flags);
+ spin_lock_irqsave(&subpriv->spinlock, flags);
s->async->inttrig = 0;
if (subpriv->active) {
event = dio200_start_intr(dev, s);
}
- comedi_spin_unlock_irqrestore(&subpriv->spinlock, flags);
+ spin_unlock_irqrestore(&subpriv->spinlock, flags);
if (event) {
comedi_event(dev, s);
triggered = 0;
- comedi_spin_lock_irqsave(&subpriv->spinlock, flags);
+ spin_lock_irqsave(&subpriv->spinlock, flags);
oldevents = s->async->events;
if (subpriv->has_int_sce) {
/*
}
}
}
- comedi_spin_unlock_irqrestore(&subpriv->spinlock, flags);
+ spin_unlock_irqrestore(&subpriv->spinlock, flags);
if (oldevents != s->async->events) {
comedi_event(dev, s);
struct dio200_subdev_intr *subpriv = s->private;
unsigned long flags;
- comedi_spin_lock_irqsave(&subpriv->spinlock, flags);
+ spin_lock_irqsave(&subpriv->spinlock, flags);
if (subpriv->active) {
dio200_stop_intr(dev, s);
}
- comedi_spin_unlock_irqrestore(&subpriv->spinlock, flags);
+ spin_unlock_irqrestore(&subpriv->spinlock, flags);
return 0;
}
unsigned long flags;
int event = 0;
- comedi_spin_lock_irqsave(&subpriv->spinlock, flags);
+ spin_lock_irqsave(&subpriv->spinlock, flags);
subpriv->active = 1;
/* Set up end of acquisition. */
event = dio200_start_intr(dev, s);
break;
}
- comedi_spin_unlock_irqrestore(&subpriv->spinlock, flags);
+ spin_unlock_irqrestore(&subpriv->spinlock, flags);
if (event) {
comedi_event(dev, s);
if (irq) {
unsigned long flags = share_irq ? IRQF_SHARED : 0;
- if (comedi_request_irq(irq, dio200_interrupt, flags,
+ if (request_irq(irq, dio200_interrupt, flags,
DIO200_DRIVER_NAME, dev) >= 0) {
dev->irq = irq;
} else {
DIO200_DRIVER_NAME);
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
if (dev->subdevices) {
layout = thislayout;
if (irq) {
unsigned long flags = share_irq ? IRQF_SHARED : 0;
- if (comedi_request_irq(irq, pc236_interrupt, flags,
+ if (request_irq(irq, pc236_interrupt, flags,
PC236_DRIVER_NAME, dev) >= 0) {
dev->irq = irq;
s->type = COMEDI_SUBD_DI;
pc236_intr_disable(dev);
}
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (dev->subdevices) {
subdev_8255_cleanup(dev, dev->subdevices + 0);
}
{
unsigned long flags;
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
devpriv->enable_irq = 0;
#ifdef CONFIG_COMEDI_PCI
if (devpriv->lcr_iobase)
outl(PCI236_INTR_DISABLE, devpriv->lcr_iobase + PLX9052_INTCSR);
#endif
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
}
/*
{
unsigned long flags;
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
devpriv->enable_irq = 1;
#ifdef CONFIG_COMEDI_PCI
if (devpriv->lcr_iobase)
outl(PCI236_INTR_ENABLE, devpriv->lcr_iobase + PLX9052_INTCSR);
#endif
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
}
/*
int retval = 0;
unsigned long flags;
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
if (devpriv->enable_irq) {
retval = 1;
#ifdef CONFIG_COMEDI_PCI
}
#endif
}
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return retval;
}
return;
}
- comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+ spin_lock_irqsave(&devpriv->ao_spinlock, flags);
/* Kill the interrupts. */
devpriv->intsce = 0;
outb(0, devpriv->iobase1 + PCI224_INT_SCE);
* routine.
*/
while (devpriv->intr_running && devpriv->intr_cpuid != THISCPU) {
- comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
- comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+ spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+ spin_lock_irqsave(&devpriv->ao_spinlock, flags);
}
- comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+ spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
/* Reconfigure DAC for insn_write usage. */
outw(0, dev->iobase + PCI224_DACCEN); /* Disable channels. */
devpriv->daccon = COMBINE(devpriv->daccon,
comedi_event(dev, s);
} else {
/* Enable interrupts. */
- comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+ spin_lock_irqsave(&devpriv->ao_spinlock, flags);
if (cmd->stop_src == TRIG_EXT) {
devpriv->intsce = PCI224_INTR_EXT | PCI224_INTR_DAC;
} else {
devpriv->intsce = PCI224_INTR_DAC;
}
outb(devpriv->intsce, devpriv->iobase1 + PCI224_INT_SCE);
- comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+ spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
}
}
/* Nothing left to put in the FIFO. */
pci224_ao_stop(dev, s);
s->async->events |= COMEDI_CB_OVERFLOW;
- rt_printk(KERN_ERR "comedi%d: "
+ printk(KERN_ERR "comedi%d: "
"AO buffer underrun\n", dev->minor);
}
}
*/
switch (cmd->start_src) {
case TRIG_INT:
- comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+ spin_lock_irqsave(&devpriv->ao_spinlock, flags);
s->async->inttrig = &pci224_ao_inttrig_start;
- comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+ spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
break;
case TRIG_EXT:
/* Enable external interrupt trigger to start acquisition. */
- comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+ spin_lock_irqsave(&devpriv->ao_spinlock, flags);
devpriv->intsce |= PCI224_INTR_EXT;
outb(devpriv->intsce, devpriv->iobase1 + PCI224_INT_SCE);
- comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+ spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
break;
}
intstat = inb(devpriv->iobase1 + PCI224_INT_SCE) & 0x3F;
if (intstat) {
retval = 1;
- comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+ spin_lock_irqsave(&devpriv->ao_spinlock, flags);
valid_intstat = devpriv->intsce & intstat;
/* Temporarily disable interrupt sources. */
curenab = devpriv->intsce & ~intstat;
outb(curenab, devpriv->iobase1 + PCI224_INT_SCE);
devpriv->intr_running = 1;
devpriv->intr_cpuid = THISCPU;
- comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+ spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
if (valid_intstat != 0) {
cmd = &s->async->cmd;
if (valid_intstat & PCI224_INTR_EXT) {
}
}
/* Reenable interrupt sources. */
- comedi_spin_lock_irqsave(&devpriv->ao_spinlock, flags);
+ spin_lock_irqsave(&devpriv->ao_spinlock, flags);
if (curenab != devpriv->intsce) {
outb(devpriv->intsce,
devpriv->iobase1 + PCI224_INT_SCE);
}
devpriv->intr_running = 0;
- comedi_spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
+ spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
}
return IRQ_RETVAL(retval);
}
dev->board_name = thisboard->name;
if (irq) {
- ret = comedi_request_irq(irq, pci224_interrupt, IRQF_SHARED,
- DRIVER_NAME, dev);
+ ret = request_irq(irq, pci224_interrupt, IRQF_SHARED,
+ DRIVER_NAME, dev);
if (ret < 0) {
printk(KERN_ERR "comedi%d: error! "
"unable to allocate irq %u\n", dev->minor, irq);
printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor, DRIVER_NAME);
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
if (dev->subdevices) {
struct comedi_subdevice *s;
dev->iobase + PCI230_ADCCON);
/* Register the interrupt handler. */
- irq_hdl = comedi_request_irq(devpriv->pci_dev->irq, pci230_interrupt,
- IRQF_SHARED, "amplc_pci230", dev);
+ irq_hdl = request_irq(devpriv->pci_dev->irq, pci230_interrupt,
+ IRQF_SHARED, "amplc_pci230", dev);
if (irq_hdl < 0) {
printk("comedi%d: unable to register irq, "
"commands will not be available %d\n", dev->minor,
subdev_8255_cleanup(dev, dev->subdevices + 2);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (devpriv) {
if (devpriv->pci_dev) {
ok = 1;
claimed = 0;
- comedi_spin_lock_irqsave(&devpriv->res_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->res_spinlock, irqflags);
for (b = 1, i = 0; (i < NUM_RESOURCES)
&& (res_mask != 0); b <<= 1, i++) {
if ((res_mask & b) != 0) {
}
}
}
- comedi_spin_unlock_irqrestore(&devpriv->res_spinlock, irqflags);
+ spin_unlock_irqrestore(&devpriv->res_spinlock, irqflags);
return ok;
}
unsigned int b;
unsigned long irqflags;
- comedi_spin_lock_irqsave(&devpriv->res_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->res_spinlock, irqflags);
for (b = 1, i = 0; (i < NUM_RESOURCES)
&& (res_mask != 0); b <<= 1, i++) {
if ((res_mask & b) != 0) {
}
}
}
- comedi_spin_unlock_irqrestore(&devpriv->res_spinlock, irqflags);
+ spin_unlock_irqrestore(&devpriv->res_spinlock, irqflags);
}
static inline void put_one_resource(struct comedi_device *dev, unsigned int resource,
status = inw(dev->iobase + PCI230_ADCCON);
if (!(status & PCI230_ADC_FIFO_EMPTY))
break;
- comedi_udelay(1);
+ udelay(1);
}
if (i == TIMEOUT) {
- /* rt_printk() should be used instead of printk()
+ /* printk() should be used instead of printk()
* whenever the code can be called from real-time. */
- rt_printk("timeout\n");
+ printk("timeout\n");
return -ETIMEDOUT;
}
if (trig_num != 0)
return -EINVAL;
- comedi_spin_lock_irqsave(&devpriv->ao_stop_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->ao_stop_spinlock, irqflags);
if (test_bit(AO_CMD_STARTED, &devpriv->state)) {
/* Perform scan. */
if (devpriv->hwver < 2) {
/* Not using DAC FIFO. */
- comedi_spin_unlock_irqrestore(&devpriv->
+ spin_unlock_irqrestore(&devpriv->
ao_stop_spinlock, irqflags);
pci230_handle_ao_nofifo(dev, s);
comedi_event(dev, s);
/* Using DAC FIFO. */
/* Read DACSWTRIG register to trigger conversion. */
inw(dev->iobase + PCI230P2_DACSWTRIG);
- comedi_spin_unlock_irqrestore(&devpriv->
+ spin_unlock_irqrestore(&devpriv->
ao_stop_spinlock, irqflags);
}
/* Delay. Should driver be responsible for this? */
/* XXX TODO: See if DAC busy bit can be used. */
- comedi_udelay(8);
+ udelay(8);
}
return 1;
if (devpriv->hwver < 2) {
/* Not using DAC FIFO. */
/* Enable CT1 timer interrupt. */
- comedi_spin_lock_irqsave(&devpriv->isr_spinlock,
+ spin_lock_irqsave(&devpriv->isr_spinlock,
irqflags);
devpriv->int_en |= PCI230_INT_ZCLK_CT1;
devpriv->ier |= PCI230_INT_ZCLK_CT1;
outb(devpriv->ier,
devpriv->iobase1 + PCI230_INT_SCE);
- comedi_spin_unlock_irqrestore(&devpriv->
+ spin_unlock_irqrestore(&devpriv->
isr_spinlock, irqflags);
}
/* Set CT1 gate high to start counting. */
}
if (devpriv->hwver >= 2) {
/* Using DAC FIFO. Enable DAC FIFO interrupt. */
- comedi_spin_lock_irqsave(&devpriv->isr_spinlock,
+ spin_lock_irqsave(&devpriv->isr_spinlock,
irqflags);
devpriv->int_en |= PCI230P2_INT_DAC;
devpriv->ier |= PCI230P2_INT_DAC;
outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
- comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock,
+ spin_unlock_irqrestore(&devpriv->isr_spinlock,
irqflags);
}
}
if (trig_num != 0)
return -EINVAL;
- comedi_spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
if (test_bit(AI_CMD_STARTED, &devpriv->state)) {
unsigned int delayus;
/* single-ended or PCI230+/260+ */
delayus = 4;
}
- comedi_spin_unlock_irqrestore(&devpriv->ai_stop_spinlock,
+ spin_unlock_irqrestore(&devpriv->ai_stop_spinlock,
irqflags);
- comedi_udelay(delayus);
+ udelay(delayus);
} else {
- comedi_spin_unlock_irqrestore(&devpriv->ai_stop_spinlock,
+ spin_unlock_irqrestore(&devpriv->ai_stop_spinlock,
irqflags);
}
if (trig_num != 0)
return -EINVAL;
- comedi_spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
if (test_bit(AI_CMD_STARTED, &devpriv->state)) {
/* Trigger scan by waggling CT0 gate source. */
zgat = GAT_CONFIG(0, GAT_GND);
zgat = GAT_CONFIG(0, GAT_VCC);
outb(zgat, devpriv->iobase1 + PCI230_ZGAT_SCE);
}
- comedi_spin_unlock_irqrestore(&devpriv->ai_stop_spinlock, irqflags);
+ spin_unlock_irqrestore(&devpriv->ai_stop_spinlock, irqflags);
return 1;
}
comedi_event(dev, s);
} else {
/* Enable ADC FIFO trigger level interrupt. */
- comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
devpriv->int_en |= PCI230_INT_ADC;
devpriv->ier |= PCI230_INT_ADC;
outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
- comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+ spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
/* Update conversion trigger source which is currently set
* to CT2 output, which is currently stuck high. */
* FIFO reset (above) and the second FIFO reset (below). Setting the
* channel gains and scan list _before_ the first FIFO reset also
* helps, though only slightly. */
- comedi_udelay(25);
+ udelay(25);
/* Reset FIFO again. */
outw(adccon | PCI230_ADC_FIFO_RESET, dev->iobase + PCI230_ADCCON);
return IRQ_NONE;
}
- comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
valid_status_int = devpriv->int_en & status_int;
/* Disable triggered interrupts.
* (Only those interrupts that need re-enabling, are, later in the
outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
devpriv->intr_running = 1;
devpriv->intr_cpuid = THISCPU;
- comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+ spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
/*
* Check the source of interrupt and handle it.
}
/* Reenable interrupts. */
- comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
if (devpriv->ier != devpriv->int_en) {
devpriv->ier = devpriv->int_en;
outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
}
devpriv->intr_running = 0;
- comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+ spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
return IRQ_HANDLED;
}
int started;
struct comedi_cmd *cmd;
- comedi_spin_lock_irqsave(&devpriv->ao_stop_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->ao_stop_spinlock, irqflags);
started = test_and_clear_bit(AO_CMD_STARTED, &devpriv->state);
- comedi_spin_unlock_irqrestore(&devpriv->ao_stop_spinlock, irqflags);
+ spin_unlock_irqrestore(&devpriv->ao_stop_spinlock, irqflags);
if (!started) {
return;
}
}
/* Disable interrupt and wait for interrupt routine to finish running
* unless we are called from the interrupt routine. */
- comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
devpriv->int_en &= ~intsrc;
while (devpriv->intr_running && devpriv->intr_cpuid != THISCPU) {
- comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
- comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+ spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
}
if (devpriv->ier != devpriv->int_en) {
devpriv->ier = devpriv->int_en;
outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
}
- comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+ spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
if (devpriv->hwver >= 2) {
/* Using DAC FIFO. Reset FIFO, clear underrun error,
struct comedi_cmd *cmd;
int started;
- comedi_spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
started = test_and_clear_bit(AI_CMD_STARTED, &devpriv->state);
- comedi_spin_unlock_irqrestore(&devpriv->ai_stop_spinlock, irqflags);
+ spin_unlock_irqrestore(&devpriv->ai_stop_spinlock, irqflags);
if (!started) {
return;
}
pci230_cancel_ct(dev, 0);
}
- comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
/* Disable ADC interrupt and wait for interrupt routine to finish
* running unless we are called from the interrupt routine. */
devpriv->int_en &= ~PCI230_INT_ADC;
while (devpriv->intr_running && devpriv->intr_cpuid != THISCPU) {
- comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
- comedi_spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+ spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
}
if (devpriv->ier != devpriv->int_en) {
devpriv->ier = devpriv->int_en;
outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
}
- comedi_spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+ spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
/* Reset FIFO, disable FIFO and set start conversion source to none.
* Keep se/diff and bip/uni settings */
}
printk("\n");
- ret = comedi_request_irq(link->irq.AssignedIRQ, das16cs_interrupt,
- IRQF_SHARED, "cb_das16_cs", dev);
+ ret = request_irq(link->irq.AssignedIRQ, das16cs_interrupt,
+ IRQF_SHARED, "cb_das16_cs", dev);
if (ret < 0) {
return ret;
}
printk("comedi%d: das16cs: remove\n", dev->minor);
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
return 0;
d = data[i];
outw(devpriv->status1, dev->iobase + 4);
- comedi_udelay(1);
+ udelay(1);
status1 = devpriv->status1 & ~0xf;
if (chan)
/* printk("0x%04x\n",status1);*/
outw(status1, dev->iobase + 4);
- comedi_udelay(1);
+ udelay(1);
for (bit = 15; bit >= 0; bit--) {
int b = (d >> bit) & 0x1;
b <<= 1;
/* printk("0x%04x\n",status1 | b | 0x0000);*/
outw(status1 | b | 0x0000, dev->iobase + 4);
- comedi_udelay(1);
+ udelay(1);
/* printk("0x%04x\n",status1 | b | 0x0004);*/
outw(status1 | b | 0x0004, dev->iobase + 4);
- comedi_udelay(1);
+ udelay(1);
}
/* make high both DAC0CS and DAC1CS to load
new data and update analog output*/
devpriv->s5933_config + AMCC_OP_REG_INTCSR);
/* get irq */
- if (comedi_request_irq(devpriv->pci_dev->irq, cb_pcidas_interrupt,
+ if (request_irq(devpriv->pci_dev->irq, cb_pcidas_interrupt,
IRQF_SHARED, "cb_pcidas", dev)) {
printk(" unable to allocate irq %d\n", devpriv->pci_dev->irq);
return -EINVAL;
outl(INTCSR_INBOX_INTR_STATUS,
devpriv->s5933_config + AMCC_OP_REG_INTCSR);
#ifdef CB_PCIDAS_DEBUG
- rt_printk("detaching, incsr is 0x%x\n",
+ printk("detaching, incsr is 0x%x\n",
inl(devpriv->s5933_config +
AMCC_OP_REG_INTCSR));
#endif
}
}
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (dev->subdevices)
subdev_8255_cleanup(dev, dev->subdevices + 2);
if (devpriv && devpriv->pci_dev) {
/* set channel and range */
channel = CR_CHAN(insn->chanspec);
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
devpriv->ao_control_bits &=
~DAC_MODE_UPDATE_BOTH & ~DAC_RANGE_MASK(channel);
devpriv->ao_control_bits |=
DACEN | DAC_RANGE(channel, CR_RANGE(insn->chanspec));
outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* remember value for readback */
devpriv->ao_value[channel] = data[0];
/* set channel and range */
channel = CR_CHAN(insn->chanspec);
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
devpriv->ao_control_bits &=
~DAC_CHAN_EN(0) & ~DAC_CHAN_EN(1) & ~DAC_RANGE_MASK(channel) &
~DAC_PACER_MASK;
DACEN | DAC_RANGE(channel,
CR_RANGE(insn->chanspec)) | DAC_CHAN_EN(channel) | DAC_START;
outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* remember value for readback */
devpriv->ao_value[channel] = data[0];
outw(cal_enable_bits(dev) | (value & 0xff),
devpriv->control_status + CALIBRATION_REG);
- comedi_udelay(1);
+ udelay(1);
outw(cal_enable_bits(dev) | SELECT_DAC08_BIT | (value & 0xff),
devpriv->control_status + CALIBRATION_REG);
- comedi_udelay(1);
+ udelay(1);
outw(cal_enable_bits(dev) | (value & 0xff),
devpriv->control_status + CALIBRATION_REG);
- comedi_udelay(1);
+ udelay(1);
return 1;
}
outw(bits, devpriv->control_status + ADCMUX_CONT);
#ifdef CB_PCIDAS_DEBUG
- rt_printk("comedi: sent 0x%x to adcmux control\n", bits);
+ printk("comedi: sent 0x%x to adcmux control\n", bits);
#endif
/* load counters */
devpriv->count = cmd->chanlist_len * cmd->stop_arg;
}
/* enable interrupts */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
devpriv->adc_fifo_bits |= INTE;
devpriv->adc_fifo_bits &= ~INT_MASK;
if (cmd->flags & TRIG_WAKE_EOS) {
devpriv->adc_fifo_bits |= INT_FHF; /* interrupt fifo half full */
}
#ifdef CB_PCIDAS_DEBUG
- rt_printk("comedi: adc_fifo_bits are 0x%x\n", devpriv->adc_fifo_bits);
+ printk("comedi: adc_fifo_bits are 0x%x\n", devpriv->adc_fifo_bits);
#endif
/* enable (and clear) interrupts */
outw(devpriv->adc_fifo_bits | EOAI | INT | LADFUL,
devpriv->control_status + INT_ADCFIFO);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* set start trigger and burst mode */
bits = 0;
bits |= BURSTE;
outw(bits, devpriv->control_status + TRIG_CONTSTAT);
#ifdef CB_PCIDAS_DEBUG
- rt_printk("comedi: sent 0x%x to trig control\n", bits);
+ printk("comedi: sent 0x%x to trig control\n", bits);
#endif
return 0;
unsigned long flags;
/* set channel limits, gain */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
for (i = 0; i < cmd->chanlist_len; i++) {
/* enable channel */
devpriv->ao_control_bits |=
/* disable analog out before settings pacer source and count values */
outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* clear fifo */
outw(0, devpriv->ao_registers + DACFIFOCLR);
devpriv->ao_count = cmd->chanlist_len * cmd->stop_arg;
}
/* set pacer source */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
switch (cmd->scan_begin_src) {
case TRIG_TIMER:
devpriv->ao_control_bits |= DAC_PACER_INT;
devpriv->ao_control_bits |= DAC_PACER_EXT_RISE;
break;
default:
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
comedi_error(dev, "error setting dac pacer source");
return -1;
break;
}
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
async->inttrig = cb_pcidas_ao_inttrig;
outsw(devpriv->ao_registers + DACDATA, devpriv->ao_buffer, num_bytes);
/* enable dac half-full and empty interrupts */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
devpriv->adc_fifo_bits |= DAEMIE | DAHFIE;
#ifdef CB_PCIDAS_DEBUG
- rt_printk("comedi: adc_fifo_bits are 0x%x\n", devpriv->adc_fifo_bits);
+ printk("comedi: adc_fifo_bits are 0x%x\n", devpriv->adc_fifo_bits);
#endif
/* enable and clear interrupts */
outw(devpriv->adc_fifo_bits | DAEMI | DAHFI,
devpriv->ao_control_bits |= DAC_START | DACEN | DAC_EMPTY;
outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR);
#ifdef CB_PCIDAS_DEBUG
- rt_printk("comedi: sent 0x%x to dac control\n",
+ printk("comedi: sent 0x%x to dac control\n",
devpriv->ao_control_bits);
#endif
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
async->inttrig = NULL;
s5933_status = inl(devpriv->s5933_config + AMCC_OP_REG_INTCSR);
#ifdef CB_PCIDAS_DEBUG
- rt_printk("intcsr 0x%x\n", s5933_status);
- rt_printk("mbef 0x%x\n", inl(devpriv->s5933_config + AMCC_OP_REG_MBEF));
+ printk("intcsr 0x%x\n", s5933_status);
+ printk("mbef 0x%x\n", inl(devpriv->s5933_config + AMCC_OP_REG_MBEF));
#endif
if ((INTCSR_INTR_ASSERTED & s5933_status) == 0)
cb_pcidas_cancel(dev, s);
}
/* clear half-full interrupt latch */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
outw(devpriv->adc_fifo_bits | INT,
devpriv->control_status + INT_ADCFIFO);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* else if fifo not empty */
} else if (status & (ADNEI | EOBI)) {
for (i = 0; i < timeout; i++) {
}
}
/* clear not-empty interrupt latch */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
outw(devpriv->adc_fifo_bits | INT,
devpriv->control_status + INT_ADCFIFO);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
} else if (status & EOAI) {
comedi_error(dev,
"bug! encountered end of aquisition interrupt?");
/* clear EOA interrupt latch */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
outw(devpriv->adc_fifo_bits | EOAI,
devpriv->control_status + INT_ADCFIFO);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
}
/* check for fifo overflow */
if (status & LADFUL) {
comedi_error(dev, "fifo overflow");
/* clear overflow interrupt latch */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
outw(devpriv->adc_fifo_bits | LADFUL,
devpriv->control_status + INT_ADCFIFO);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
cb_pcidas_cancel(dev, s);
async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
}
if (status & DAEMI) {
/* clear dac empty interrupt latch */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
outw(devpriv->adc_fifo_bits | DAEMI,
devpriv->control_status + INT_ADCFIFO);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
if (inw(devpriv->ao_registers + DAC_CSR) & DAC_EMPTY) {
if (cmd->stop_src == TRIG_NONE ||
(cmd->stop_src == TRIG_COUNT
outsw(devpriv->ao_registers + DACDATA, devpriv->ao_buffer,
num_points);
/* clear half-full interrupt latch */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
outw(devpriv->adc_fifo_bits | DAHFI,
devpriv->control_status + INT_ADCFIFO);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
}
comedi_event(dev, s);
{
unsigned long flags;
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
/* disable interrupts */
devpriv->adc_fifo_bits &= ~INTE & ~EOAIE;
outw(devpriv->adc_fifo_bits, devpriv->control_status + INT_ADCFIFO);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* disable start trigger source and burst mode */
outw(0, devpriv->control_status + TRIG_CONTSTAT);
{
unsigned long flags;
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
/* disable interrupts */
devpriv->adc_fifo_bits &= ~DAHFIE & ~DAEMIE;
outw(devpriv->adc_fifo_bits, devpriv->control_status + INT_ADCFIFO);
/* disable output */
devpriv->ao_control_bits &= ~DACEN & ~DAC_PACER_MASK;
outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return 0;
}
register_bits |= SERIAL_DATA_IN_BIT;
else
register_bits &= ~SERIAL_DATA_IN_BIT;
- comedi_udelay(write_delay);
+ udelay(write_delay);
outw(register_bits, devpriv->control_status + CALIBRATION_REG);
}
}
static const int num_caldac_channels = 8;
static const int bitstream_length = 11;
unsigned int bitstream = ((address & 0x7) << 8) | value;
- static const int caldac_8800_comedi_udelay = 1;
+ static const int caldac_8800_udelay = 1;
if (address >= num_caldac_channels) {
comedi_error(dev, "illegal caldac channel");
write_calibration_bitstream(dev, cal_enable_bits(dev), bitstream,
bitstream_length);
- comedi_udelay(caldac_8800_comedi_udelay);
+ udelay(caldac_8800_udelay);
outw(cal_enable_bits(dev) | SELECT_8800_BIT,
devpriv->control_status + CALIBRATION_REG);
- comedi_udelay(caldac_8800_comedi_udelay);
+ udelay(caldac_8800_udelay);
outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG);
return 1;
static const int bitstream_length = 7;
unsigned int bitstream = value & 0x7f;
unsigned int register_bits;
- static const int ad7376_comedi_udelay = 1;
+ static const int ad7376_udelay = 1;
register_bits = cal_enable_bits(dev) | SELECT_TRIMPOT_BIT;
- comedi_udelay(ad7376_comedi_udelay);
+ udelay(ad7376_udelay);
outw(register_bits, devpriv->control_status + CALIBRATION_REG);
write_calibration_bitstream(dev, register_bits, bitstream,
bitstream_length);
- comedi_udelay(ad7376_comedi_udelay);
+ udelay(ad7376_udelay);
outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG);
return 0;
static const int bitstream_length = 10;
unsigned int bitstream = ((channel & 0x3) << 8) | (value & 0xff);
unsigned int register_bits;
- static const int ad8402_comedi_udelay = 1;
+ static const int ad8402_udelay = 1;
register_bits = cal_enable_bits(dev) | SELECT_TRIMPOT_BIT;
- comedi_udelay(ad8402_comedi_udelay);
+ udelay(ad8402_udelay);
outw(register_bits, devpriv->control_status + CALIBRATION_REG);
write_calibration_bitstream(dev, register_bits, bitstream,
bitstream_length);
- comedi_udelay(ad8402_comedi_udelay);
+ udelay(ad8402_udelay);
outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG);
return 0;
AMCC_OP_REG_MCSR_NVCMD) & MCSR_NV_BUSY)
== 0)
return 0;
- comedi_udelay(1);
+ udelay(1);
}
return -1;
}
/* #define PCIDAS64_DEBUG enable debugging code */
#ifdef PCIDAS64_DEBUG
-#define DEBUG_PRINT(format, args...) rt_printk(format , ## args)
+#define DEBUG_PRINT(format, args...) printk(format , ## args)
#else
#define DEBUG_PRINT(format, args...)
#endif
uint16_t bits;
unsigned long flags;
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
/* bit should be set for 6025, although docs say boards with <= 16 chans should be cleared XXX */
if (1)
writew(0, priv(dev)->main_iobase + DAQ_SYNC_REG);
writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* set fifos to maximum size */
priv(dev)->fifo_size_bits |= DAC_FIFO_BITS;
init_plx9080(dev);
init_stc_registers(dev);
/* get irq */
- if (comedi_request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
+ if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
"cb_pcidas64", dev)) {
printk(" unable to allocate irq %u\n", pcidev->irq);
return -EINVAL;
printk("comedi%d: cb_pcidas: remove\n", dev->minor);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (priv(dev)) {
if (priv(dev)->hw_dev) {
if (priv(dev)->plx9080_iobase) {
/* 4020 generates dac done interrupts even though they are disabled */
disable_ai_pacing(dev);
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
if (insn->chanspec & CR_ALT_FILTER)
priv(dev)->adc_control1_bits |= ADC_DITHER_BIT;
else
priv(dev)->adc_control1_bits &= ~ADC_DITHER_BIT;
writew(priv(dev)->adc_control1_bits,
priv(dev)->main_iobase + ADC_CONTROL1_REG);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
if (board(dev)->layout != LAYOUT_4020) {
/* use internal queue */
if (pipe_full_bits(bits))
break;
}
- comedi_udelay(1);
+ udelay(1);
}
DEBUG_PRINT(" looped %i times waiting for data\n", i);
if (i == timeout) {
comedi_error(dev, " analog input read insn timed out");
- rt_printk(" status 0x%x\n", bits);
+ printk(" status 0x%x\n", bits);
return -ETIME;
}
if (board(dev)->layout == LAYOUT_4020)
disable_ai_interrupts(dev);
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
priv(dev)->adc_control1_bits &= ~ADC_SW_GATE_BIT;
writew(priv(dev)->adc_control1_bits,
priv(dev)->main_iobase + ADC_CONTROL1_REG);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* disable pacing, triggering, etc */
writew(ADC_DMA_DISABLE_BIT | ADC_SOFT_GATE_BITS | ADC_GATE_LEVEL_BIT,
{
unsigned long flags;
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
priv(dev)->intr_enable_bits &=
~EN_ADC_INTR_SRC_BIT & ~EN_ADC_DONE_INTR_BIT &
~EN_ADC_ACTIVE_INTR_BIT & ~EN_ADC_STOP_INTR_BIT &
~EN_ADC_OVERRUN_BIT & ~ADC_INTR_SRC_MASK;
writew(priv(dev)->intr_enable_bits,
priv(dev)->main_iobase + INTR_ENABLE_REG);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
DEBUG_PRINT("intr enable bits 0x%x\n", priv(dev)->intr_enable_bits);
}
if (board(dev)->layout != LAYOUT_4020)
bits |= ADC_INTR_EOSCAN_BITS | EN_ADC_INTR_SRC_BIT;
}
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
priv(dev)->intr_enable_bits |= bits;
writew(priv(dev)->intr_enable_bits,
priv(dev)->main_iobase + INTR_ENABLE_REG);
DEBUG_PRINT("intr enable bits 0x%x\n", priv(dev)->intr_enable_bits);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
}
static uint32_t ai_convert_counter_6xxx(const struct comedi_device *dev,
unsigned long flags;
/* spinlock for plx dma control/status reg */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
if (channel)
writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT |
PLX_CLEAR_DMA_INTR_BIT,
writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT |
PLX_CLEAR_DMA_INTR_BIT,
priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
}
static void set_ai_pacing(struct comedi_device *dev, struct comedi_cmd *cmd)
enable_ai_interrupts(dev, cmd);
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
/* set mode, allow conversions through software gate */
priv(dev)->adc_control1_bits |= ADC_SW_GATE_BIT;
priv(dev)->adc_control1_bits &= ~ADC_DITHER_BIT;
writew(priv(dev)->adc_control1_bits,
priv(dev)->main_iobase + ADC_CONTROL1_REG);
DEBUG_PRINT("control1 bits 0x%x\n", priv(dev)->adc_control1_bits);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* clear adc buffer */
writew(0, priv(dev)->main_iobase + ADC_BUFFER_CLEAR_REG);
writew(bits, priv(dev)->main_iobase + DAQ_ATRIG_LOW_4020_REG);
}
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
/* enable pacing, triggering, etc */
bits = ADC_ENABLE_BIT | ADC_SOFT_GATE_BITS | ADC_GATE_LEVEL_BIT;
priv(dev)->ai_cmd_running = 1;
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* start aquisition */
if (cmd->start_src == TRIG_NOW) {
}
if (num_samples < 0) {
- rt_printk(" cb_pcidas64: bug! num_samples < 0\n");
+ printk(" cb_pcidas64: bug! num_samples < 0\n");
break;
}
async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
}
/* spin lock makes sure noone else changes plx dma control reg */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
if (plx_status & ICS_DMA1_A) { /* dma chan 1 interrupt */
writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
}
DEBUG_PRINT(" cleared dma ch1 interrupt\n");
}
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
if (status & ADC_DONE_BIT)
DEBUG_PRINT("adc done interrupt\n");
(status & ADC_INTR_PENDING_BIT) &&
(board(dev)->layout != LAYOUT_4020))) {
DEBUG_PRINT("pio fifo drain\n");
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
if (priv(dev)->ai_cmd_running) {
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
pio_drain_ai_fifo(dev);
} else
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
}
/* if we are have all the data, then quit */
if ((cmd->stop_src == TRIG_COUNT && priv(dev)->ai_count <= 0) ||
cmd = &async->cmd;
/* spin lock makes sure noone else changes plx dma control reg */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
if (plx_status & ICS_DMA0_A) { /* dma chan 0 interrupt */
if ((dma0_status & PLX_DMA_EN_BIT)
else
writeb(PLX_CLEAR_DMA_INTR_BIT,
priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
DEBUG_PRINT("dma0 status 0x%x\n", dma0_status);
if (dma0_status & PLX_DMA_EN_BIT) {
load_ao_dma(dev, cmd);
}
DEBUG_PRINT(" cleared dma ch0 interrupt\n");
} else
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
if ((status & DAC_DONE_BIT)) {
async->events |= COMEDI_CB_EOA;
unsigned long flags;
/* spinlock for plx dma control/status reg */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
plx9080_abort_dma(priv(dev)->plx9080_iobase, channel);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
}
static int ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
unsigned long flags;
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
if (priv(dev)->ai_cmd_running == 0) {
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return 0;
}
priv(dev)->ai_cmd_running = 0;
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
disable_ai_pacing(dev);
static const int bitstream_length = 10;
unsigned int bit, register_bits;
unsigned int bitstream = ((channel & 0x3) << 8) | (value & 0xff);
- static const int ad8402_comedi_udelay = 1;
+ static const int ad8402_udelay = 1;
priv(dev)->ad8402_state[channel] = value;
register_bits = SELECT_8402_64XX_BIT;
- comedi_udelay(ad8402_comedi_udelay);
+ udelay(ad8402_udelay);
writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG);
for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
register_bits |= SERIAL_DATA_IN_BIT;
else
register_bits &= ~SERIAL_DATA_IN_BIT;
- comedi_udelay(ad8402_comedi_udelay);
+ udelay(ad8402_udelay);
writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG);
- comedi_udelay(ad8402_comedi_udelay);
+ udelay(ad8402_udelay);
writew(register_bits | SERIAL_CLOCK_BIT,
priv(dev)->main_iobase + CALIBRATION_REG);
}
- comedi_udelay(ad8402_comedi_udelay);
+ udelay(ad8402_udelay);
writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
}
priv(dev)->plx9080_iobase + PLX_CONTROL_REG;
uint16_t value;
static const int value_length = 16;
- static const int eeprom_comedi_udelay = 1;
+ static const int eeprom_udelay = 1;
- comedi_udelay(eeprom_comedi_udelay);
+ udelay(eeprom_udelay);
priv(dev)->plx_control_bits &= ~CTL_EE_CLK & ~CTL_EE_CS;
/* make sure we don't send anything to the i2c bus on 4020 */
priv(dev)->plx_control_bits |= CTL_USERO;
writel(priv(dev)->plx_control_bits, plx_control_addr);
/* activate serial eeprom */
- comedi_udelay(eeprom_comedi_udelay);
+ udelay(eeprom_udelay);
priv(dev)->plx_control_bits |= CTL_EE_CS;
writel(priv(dev)->plx_control_bits, plx_control_addr);
/* write read command and desired memory address */
for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
/* set bit to be written */
- comedi_udelay(eeprom_comedi_udelay);
+ udelay(eeprom_udelay);
if (bitstream & bit)
priv(dev)->plx_control_bits |= CTL_EE_W;
else
priv(dev)->plx_control_bits &= ~CTL_EE_W;
writel(priv(dev)->plx_control_bits, plx_control_addr);
/* clock in bit */
- comedi_udelay(eeprom_comedi_udelay);
+ udelay(eeprom_udelay);
priv(dev)->plx_control_bits |= CTL_EE_CLK;
writel(priv(dev)->plx_control_bits, plx_control_addr);
- comedi_udelay(eeprom_comedi_udelay);
+ udelay(eeprom_udelay);
priv(dev)->plx_control_bits &= ~CTL_EE_CLK;
writel(priv(dev)->plx_control_bits, plx_control_addr);
}
value = 0;
for (bit = 1 << (value_length - 1); bit; bit >>= 1) {
/* clock out bit */
- comedi_udelay(eeprom_comedi_udelay);
+ udelay(eeprom_udelay);
priv(dev)->plx_control_bits |= CTL_EE_CLK;
writel(priv(dev)->plx_control_bits, plx_control_addr);
- comedi_udelay(eeprom_comedi_udelay);
+ udelay(eeprom_udelay);
priv(dev)->plx_control_bits &= ~CTL_EE_CLK;
writel(priv(dev)->plx_control_bits, plx_control_addr);
- comedi_udelay(eeprom_comedi_udelay);
+ udelay(eeprom_udelay);
if (readl(plx_control_addr) & CTL_EE_R)
value |= bit;
}
/* deactivate eeprom serial input */
- comedi_udelay(eeprom_comedi_udelay);
+ udelay(eeprom_udelay);
priv(dev)->plx_control_bits &= ~CTL_EE_CS;
writel(priv(dev)->plx_control_bits, plx_control_addr);
register_bits = 0;
if (bitstream & bit)
register_bits |= SERIAL_DATA_IN_BIT;
- comedi_udelay(caldac_8800_udelay);
+ udelay(caldac_8800_udelay);
writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG);
register_bits |= SERIAL_CLOCK_BIT;
- comedi_udelay(caldac_8800_udelay);
+ udelay(caldac_8800_udelay);
writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG);
}
- comedi_udelay(caldac_8800_udelay);
+ udelay(caldac_8800_udelay);
writew(SELECT_8800_BIT, priv(dev)->main_iobase + CALIBRATION_REG);
- comedi_udelay(caldac_8800_udelay);
+ udelay(caldac_8800_udelay);
writew(0, priv(dev)->main_iobase + CALIBRATION_REG);
- comedi_udelay(caldac_8800_udelay);
+ udelay(caldac_8800_udelay);
return 0;
}
}
/* Their i2c requires a huge delay on setting clock or data high for some reason */
-static const int i2c_high_comedi_udelay = 1000;
-static const int i2c_low_comedi_udelay = 10;
+static const int i2c_high_udelay = 1000;
+static const int i2c_low_udelay = 10;
/* set i2c data line high or low */
static void i2c_set_sda(struct comedi_device *dev, int state)
/* set data line high */
priv(dev)->plx_control_bits &= ~data_bit;
writel(priv(dev)->plx_control_bits, plx_control_addr);
- comedi_udelay(i2c_high_comedi_udelay);
+ udelay(i2c_high_udelay);
} else /* set data line low */
{
priv(dev)->plx_control_bits |= data_bit;
writel(priv(dev)->plx_control_bits, plx_control_addr);
- comedi_udelay(i2c_low_comedi_udelay);
+ udelay(i2c_low_udelay);
}
}
/* set clock line high */
priv(dev)->plx_control_bits &= ~clock_bit;
writel(priv(dev)->plx_control_bits, plx_control_addr);
- comedi_udelay(i2c_high_comedi_udelay);
+ udelay(i2c_high_udelay);
} else /* set clock line low */
{
priv(dev)->plx_control_bits |= clock_bit;
writel(priv(dev)->plx_control_bits, plx_control_addr);
- comedi_udelay(i2c_low_comedi_udelay);
+ udelay(i2c_low_udelay);
}
}
/* Dont support IRQ yet */
/* get irq */
-/* if(comedi_request_irq(devpriv->pci_dev->irq, cb_pcimdas_interrupt, IRQF_SHARED, "cb_pcimdas", dev )) */
+/* if(request_irq(devpriv->pci_dev->irq, cb_pcimdas_interrupt, IRQF_SHARED, "cb_pcimdas", dev )) */
/* { */
/* printk(" unable to allocate irq %u\n", devpriv->pci_dev->irq); */
/* return -EINVAL; */
#endif
printk("comedi%d: cb_pcimdas: remove\n", dev->minor);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (devpriv) {
if (devpriv->pci_dev) {
if (devpriv->BADR0) {
retval = comedi_buf_write_alloc(async, num_bytes);
if (retval != num_bytes) {
- rt_printk("comedi: buffer overrun\n");
+ printk("comedi: buffer overrun\n");
async->events |= COMEDI_CB_OVERFLOW;
return 0;
}
irq = it->options[1];
if (irq) {
printk(" irq=%u", irq);
- ret = comedi_request_irq(irq, parport_interrupt, 0,
- "comedi_parport", dev);
+ ret = request_irq(irq, parport_interrupt, 0, "comedi_parport",
+ dev);
if (ret < 0) {
printk(" irq not available\n");
return -EINVAL;
release_region(dev->iobase, PARPORT_SIZE);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
return 0;
}
timing_error = now - (devpriv->start + scan * devpriv->scan_period);
if (timing_error > devpriv->scan_period) {
comedi_error(dev, "timing error");
- rt_printk("scan started %i ns late\n", timing_error * 838);
+ printk("scan started %i ns late\n", timing_error * 838);
return -1;
}
now - (scan_start + conversion * devpriv->convert_period);
if (timing_error > devpriv->convert_period) {
comedi_error(dev, "timing error");
- rt_printk("conversion started %i ns late\n",
+ printk("conversion started %i ns late\n",
timing_error * 838);
return -1;
}
if (data[0]) {
s->state &= ~data[0];
s->state |= data[0] & data[1];
- rt_printk(" out: %d on %lx\n", s->state,
+ printk(" out: %d on %lx\n", s->state,
dev->iobase + thisboard->out_offs);
outw(s->state, dev->iobase + thisboard->out_offs);
}
struct comedi_insn *insn, unsigned int *data)
{
- rt_printk("contec_di_insn_bits called\n");
- rt_printk(" data: %d %d\n", data[0], data[1]);
+ printk("contec_di_insn_bits called\n");
+ printk(" data: %d %d\n", data[0], data[1]);
if (insn->n != 2)
return -EINVAL;
{
struct daqboard2000_hw *fpga = devpriv->daq;
-/* comedi_udelay(4); */
+/* udelay(4); */
fpga->acqScanListFIFO = entry & 0x00ff;
-/* comedi_udelay(4); */
+/* udelay(4); */
fpga->acqScanListFIFO = (entry >> 8) & 0x00ff;
}
if (fpga->acqControl & DAQBOARD2000_AcqConfigPipeFull) {
break;
}
- /* comedi_udelay(2); */
+ /* udelay(2); */
}
fpga->acqControl = DAQBOARD2000_AdcPacerEnable;
for (timeout = 0; timeout < 20; timeout++) {
if (fpga->acqControl & DAQBOARD2000_AcqLogicScanning) {
break;
}
- /* comedi_udelay(2); */
+ /* udelay(2); */
}
for (timeout = 0; timeout < 20; timeout++) {
if (fpga->
DAQBOARD2000_AcqResultsFIFOHasValidData) {
break;
}
- /* comedi_udelay(2); */
+ /* udelay(2); */
}
data[i] = fpga->acqResultsFIFO;
fpga->acqControl = DAQBOARD2000_AdcPacerDisable;
* OK, since it works OK without enabling the DAC's, let's keep
* it as simple as possible...
*/
- /* fpga->dacControl = (chan + 2) * 0x0010 | 0x0001; comedi_udelay(1000); */
+ /* fpga->dacControl = (chan + 2) * 0x0010 | 0x0001; udelay(1000); */
fpga->dacSetting[chan] = data[i];
for (timeout = 0; timeout < 20; timeout++) {
if ((fpga->dacControl & ((chan + 1) * 0x0010)) == 0) {
break;
}
- /* comedi_udelay(2); */
+ /* udelay(2); */
}
devpriv->ao_readback[chan] = data[i];
/*
* Since we never enabled the DAC's, we don't need to disable it...
- * fpga->dacControl = (chan + 2) * 0x0010 | 0x0000; comedi_udelay(1000);
+ * fpga->dacControl = (chan + 2) * 0x0010 | 0x0000; udelay(1000);
*/
}
{
printk("daqboard2000_resetLocalBus\n");
writel(DAQBOARD2000_SECRLocalBusHi, devpriv->plx + 0x6c);
- comedi_udelay(10000);
+ udelay(10000);
writel(DAQBOARD2000_SECRLocalBusLo, devpriv->plx + 0x6c);
- comedi_udelay(10000);
+ udelay(10000);
}
static void daqboard2000_reloadPLX(struct comedi_device *dev)
{
printk("daqboard2000_reloadPLX\n");
writel(DAQBOARD2000_SECRReloadLo, devpriv->plx + 0x6c);
- comedi_udelay(10000);
+ udelay(10000);
writel(DAQBOARD2000_SECRReloadHi, devpriv->plx + 0x6c);
- comedi_udelay(10000);
+ udelay(10000);
writel(DAQBOARD2000_SECRReloadLo, devpriv->plx + 0x6c);
- comedi_udelay(10000);
+ udelay(10000);
}
static void daqboard2000_pulseProgPin(struct comedi_device *dev)
{
printk("daqboard2000_pulseProgPin 1\n");
writel(DAQBOARD2000_SECRProgPinHi, devpriv->plx + 0x6c);
- comedi_udelay(10000);
+ udelay(10000);
writel(DAQBOARD2000_SECRProgPinLo, devpriv->plx + 0x6c);
- comedi_udelay(10000); /* Not in the original code, but I like symmetry... */
+ udelay(10000); /* Not in the original code, but I like symmetry... */
}
static int daqboard2000_pollCPLD(struct comedi_device *dev, int mask)
result = 1;
break;
}
- comedi_udelay(100);
+ udelay(100);
}
- comedi_udelay(5);
+ udelay(5);
return result;
}
{
int result = 0;
- comedi_udelay(10);
+ udelay(10);
writew(data, devpriv->daq + 0x1000);
if ((readw(devpriv->daq + 0x1000) & DAQBOARD2000_CPLD_INIT) ==
DAQBOARD2000_CPLD_INIT) {
struct daqboard2000_hw *fpga = devpriv->daq;
/* Disable hardware triggers */
- comedi_udelay(2);
+ udelay(2);
fpga->trigControl = DAQBOARD2000_TrigAnalog | DAQBOARD2000_TrigDisable;
- comedi_udelay(2);
+ udelay(2);
fpga->trigControl = DAQBOARD2000_TrigTTL | DAQBOARD2000_TrigDisable;
/* Stop the scan list FIFO from loading the configuration pipe */
- comedi_udelay(2);
+ udelay(2);
fpga->acqControl = DAQBOARD2000_SeqStopScanList;
/* Stop the pacer clock */
- comedi_udelay(2);
+ udelay(2);
fpga->acqControl = DAQBOARD2000_AdcPacerDisable;
/* Stop the input dma (abort channel 1) */
if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0) {
break;
}
- comedi_udelay(2);
+ udelay(2);
}
/* printk("DAQBOARD2000_PosRefDacSelect %d\n", timeout);*/
if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0) {
break;
}
- comedi_udelay(2);
+ udelay(2);
}
/* printk("DAQBOARD2000_NegRefDacSelect %d\n", timeout);*/
}
/* clear over-range bits for 16-bit boards */
if (thisboard->ai_nbits == 16)
if (inb(dev->iobase + DAS08_MSB) & 0x80)
- rt_printk("das08: over-range\n");
+ printk("das08: over-range\n");
/* trigger conversion */
outb_p(0, dev->iobase + DAS08_TRIG_12BIT);
break;
}
if (i == TIMEOUT) {
- rt_printk("das08: timeout\n");
+ printk("das08: timeout\n");
return -ETIME;
}
msb = inb(dev->iobase + DAS08_MSB);
/* #define DEBUG */
#ifdef DEBUG
-#define DEBUG_PRINT(format, args...) rt_printk("das16: " format, ## args)
+#define DEBUG_PRINT(format, args...) printk("das16: " format, ## args)
#else
#define DEBUG_PRINT(format, args...)
#endif
{
unsigned long flags;
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
/* disable interrupts, dma and pacer clocked conversions */
devpriv->control_state &= ~DAS16_INTE & ~PACING_MASK & ~DMA_ENABLE;
outb(devpriv->control_state, dev->iobase + DAS16_CONTROL);
outb(0, dev->iobase + DAS1600_BURST);
}
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return 0;
}
break;
}
if (i == DAS16_TIMEOUT) {
- rt_printk("das16: timeout\n");
+ printk("das16: timeout\n");
return -ETIME;
}
msb = inb(dev->iobase + DAS16_AI_MSB);
enable_dma(devpriv->dma_chan);
for (j = 0; j < enable_timeout; ++j) {
int new_residue;
- comedi_udelay(2);
+ udelay(2);
new_residue = get_dma_residue(devpriv->dma_chan);
if (new_residue != residue)
break;
return;
}
- comedi_spin_lock_irqsave(&dev->spinlock, spin_flags);
+ spin_lock_irqsave(&dev->spinlock, spin_flags);
if ((devpriv->control_state & DMA_ENABLE) == 0) {
- comedi_spin_unlock_irqrestore(&dev->spinlock, spin_flags);
+ spin_unlock_irqrestore(&dev->spinlock, spin_flags);
DEBUG_PRINT("interrupt while dma disabled?\n");
return;
}
}
release_dma_lock(dma_flags);
- comedi_spin_unlock_irqrestore(&dev->spinlock, spin_flags);
+ spin_unlock_irqrestore(&dev->spinlock, spin_flags);
cfc_write_array_to_buffer(s,
devpriv->dma_buffer[buffer_index], num_bytes);
/* now for the irq */
if (irq > 1 && irq < 8) {
- ret = comedi_request_irq(irq, das16_dma_interrupt, 0,
- "das16", dev);
+ ret = request_irq(irq, das16_dma_interrupt, 0, "das16", dev);
if (ret < 0)
return ret;
}
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (dev->iobase) {
if (thisboard->size < 0x400) {
unsigned int status;
/* prevent race with interrupt handler */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
status = inb(dev->iobase + DAS16M1_CS);
das16m1_handler(dev, status);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return s->async->buf_write_count - s->async->buf_read_count;
}
irq = it->options[1];
/* make sure it is valid */
if (das16m1_irq_bits(irq) >= 0) {
- ret = comedi_request_irq(irq, das16m1_interrupt, 0,
- driver_das16m1.driver_name, dev);
+ ret = request_irq(irq, das16m1_interrupt, 0,
+ driver_das16m1.driver_name, dev);
if (ret < 0) {
printk(", irq unavailable\n");
return ret;
subdev_8255_cleanup(dev, dev->subdevices + 3);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (dev->iobase) {
release_region(dev->iobase, DAS16M1_SIZE);
/* grab our IRQ */
if (irq) {
- if (comedi_request_irq(irq, das1800_interrupt, 0,
+ if (request_irq(irq, das1800_interrupt, 0,
driver_das1800.driver_name, dev)) {
printk(" unable to allocate irq %u\n", irq);
return -EINVAL;
if (dev->iobase)
release_region(dev->iobase, DAS1800_SIZE);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (dev->private) {
if (devpriv->iobase2)
release_region(devpriv->iobase2, DAS1800_SIZE);
unsigned long flags;
/* prevent race with interrupt handler */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
das1800_ai_handler(dev);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return s->async->buf_write_count - s->async->buf_read_count;
}
n = cmd.chanlist_len;
/* spinlock protects indirect addressing */
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
outb(QRAM, dev->iobase + DAS1800_SELECT); /* select QRAM for baseAddress + 0x0 */
outb(n - 1, dev->iobase + DAS1800_QRAM_ADDRESS); /*set QRAM address start */
/* make channel / gain list */
outw(chan_range, dev->iobase + DAS1800_QRAM);
}
outb(n - 1, dev->iobase + DAS1800_QRAM_ADDRESS); /*finish write to QRAM */
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
return;
}
/* mask of unipolar/bipolar bit from range */
range = CR_RANGE(insn->chanspec) & 0x3;
chan_range = chan | (range << 8);
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
outb(QRAM, dev->iobase + DAS1800_SELECT); /* select QRAM for baseAddress + 0x0 */
outb(0x0, dev->iobase + DAS1800_QRAM_ADDRESS); /* set QRAM address start */
outw(chan_range, dev->iobase + DAS1800_QRAM);
dpnt += 1 << (thisboard->resolution - 1);
data[n] = dpnt;
}
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
return n;
}
if (chan == update_chan)
devpriv->ao_update_bits = output;
/* write to channel */
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
outb(DAC(chan), dev->iobase + DAS1800_SELECT); /* select dac channel for baseAddress + 0x0 */
outw(output, dev->iobase + DAS1800_DAC);
/* now we need to write to 'update' channel to update all dac channels */
outb(DAC(update_chan), dev->iobase + DAS1800_SELECT); /* select 'update' channel for baseAddress + 0x0 */
outw(devpriv->ao_update_bits, dev->iobase + DAS1800_DAC);
}
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
return 1;
}
static int das6402_detach(struct comedi_device *dev)
{
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (dev->iobase)
release_region(dev->iobase, DAS6402_SIZE);
irq = it->options[0];
printk(" ( irq = %u )", irq);
- ret = comedi_request_irq(irq, intr_handler, 0, "das6402", dev);
+ ret = request_irq(irq, intr_handler, 0, "das6402", dev);
if (ret < 0) {
printk("irq conflict\n");
return ret;
int board;
/* 'comedi spin lock irqsave' disables even rt interrupts, we use them to protect indirect addressing */
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
outb(ID, dev->iobase + DAS800_GAIN); /* select base address + 7 to be ID register */
id_bits = inb(dev->iobase + DAS800_ID) & 0x3; /* get id bits */
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
board = thisboard - das800_boards;
async = s->async;
/* if hardware conversions are not enabled, then quit */
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
outb(CONTROL1, dev->iobase + DAS800_GAIN); /* select base address + 7 to be STATUS2 register */
status = inb(dev->iobase + DAS800_STATUS2) & STATUS2_HCEN;
/* don't release spinlock yet since we want to make sure noone else disables hardware conversions */
if (status == 0) {
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
return IRQ_HANDLED;
}
fifo_overflow = inb(dev->iobase + DAS800_GAIN) & CIO_FFOV;
}
if (fifo_overflow) {
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
comedi_error(dev, "DAS800 FIFO overflow");
das800_cancel(dev, dev->subdevices + 0);
async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
outb(CONTROL1, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be control register 1 */
outb(CONTROL1_INTE | devpriv->do_bits,
dev->iobase + DAS800_CONTROL1);
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
/* otherwise, stop taking data */
} else {
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
disable_das800(dev); /* diable hardware triggered conversions */
async->events |= COMEDI_CB_EOA;
}
return -EINVAL;
}
if (irq) {
- if (comedi_request_irq(irq, das800_interrupt, 0, "das800", dev)) {
+ if (request_irq(irq, das800_interrupt, 0, "das800", dev)) {
printk("unable to allocate irq %u\n", irq);
return -EINVAL;
}
disable_das800(dev);
/* initialize digital out channels */
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
outb(CONTROL1, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be control register 1 */
outb(CONTROL1_INTE | devpriv->do_bits, dev->iobase + DAS800_CONTROL1);
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
return 0;
};
if (dev->iobase)
release_region(dev->iobase, DAS800_SIZE);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
return 0;
};
static void enable_das800(struct comedi_device *dev)
{
unsigned long irq_flags;
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
/* enable fifo-half full interrupts for cio-das802/16 */
if (thisboard->resolution == 16)
outb(CIO_ENHF, dev->iobase + DAS800_GAIN);
outb(CONV_HCEN, dev->iobase + DAS800_CONV_CONTROL); /* enable hardware triggering */
outb(CONTROL1, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be control register 1 */
outb(CONTROL1_INTE | devpriv->do_bits, dev->iobase + DAS800_CONTROL1); /* enable card's interrupt */
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
}
/* disable_das800 stops hardware triggered conversions */
static void disable_das800(struct comedi_device *dev)
{
unsigned long irq_flags;
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
outb(CONV_CONTROL, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be conversion control register */
outb(0x0, dev->iobase + DAS800_CONV_CONTROL); /* disable hardware triggering of conversions */
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
}
static int das800_ai_do_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
endChan = (startChan + async->cmd.chanlist_len - 1) % 8;
scan = (endChan << 3) | startChan;
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
outb(SCAN_LIMITS, dev->iobase + DAS800_GAIN); /* select base address + 2 to be scan limits register */
outb(scan, dev->iobase + DAS800_SCAN_LIMITS); /* set scan limits */
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
/* set gain */
gain = CR_RANGE(async->cmd.chanlist[0]);
break;
}
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
outb(CONV_CONTROL, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be conversion control register */
outb(conv_bits, dev->iobase + DAS800_CONV_CONTROL);
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
async->events = 0;
enable_das800(dev);
return 0;
/* set multiplexer */
chan = CR_CHAN(insn->chanspec);
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
outb(CONTROL1, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be control register 1 */
outb(chan | devpriv->do_bits, dev->iobase + DAS800_CONTROL1);
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
/* set gain / range */
range = CR_RANGE(insn->chanspec);
range &= 0xf;
outb(range, dev->iobase + DAS800_GAIN);
- comedi_udelay(5);
+ udelay(5);
for (n = 0; n < insn->n; n++) {
/* trigger conversion */
wbits |= data[0] & data[1];
devpriv->do_bits = wbits << 4;
- comedi_spin_lock_irqsave(&dev->spinlock, irq_flags);
+ spin_lock_irqsave(&dev->spinlock, irq_flags);
outb(CONTROL1, dev->iobase + DAS800_GAIN); /* select dev->iobase + 2 to be control register 1 */
outb(devpriv->do_bits | CONTROL1_INTE, dev->iobase + DAS800_CONTROL1);
- comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags);
+ spin_unlock_irqrestore(&dev->spinlock, irq_flags);
data[1] = wbits;
/* board is there, register interrupt */
if (irq) {
- ret = comedi_request_irq(irq, dmm32at_isr, 0, thisboard->name,
- dev);
+ ret = request_irq(irq, dmm32at_isr, 0, thisboard->name, dev);
if (ret < 0) {
printk("irq conflict\n");
return ret;
{
printk("comedi%d: dmm32at: remove\n", dev->minor);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (dev->iobase)
release_region(dev->iobase, DMM32AT_MEMSIZE);
outb_p(DT_C_STOP, dev->iobase + DT2801_CMD);
/* dt2801_wait_for_ready(dev); */
- comedi_udelay(100);
+ udelay(100);
timeout = 10000;
do {
stat = inb_p(dev->iobase + DT2801_STATUS);
outb_p(DT_C_RESET, dev->iobase + DT2801_CMD);
/* dt2801_writecmd(dev,DT_C_RESET); */
- comedi_udelay(100);
+ udelay(100);
timeout = 10000;
do {
stat = inb_p(dev->iobase + DT2801_STATUS);
#if 0
outb(0, dev->iobase + DT2811_ADCSR);
- comedi_udelay(100);
+ udelay(100);
i = inb(dev->iobase + DT2811_ADDATLO);
i = inb(dev->iobase + DT2811_ADDATHI);
#endif
dev->iobase + DT2811_ADCSR);
outb(0, dev->iobase + DT2811_ADGCR);
- comedi_udelay(100);
+ udelay(100);
irq = probe_irq_off(irqs);
restore_flags(flags);
i = inb(dev->iobase + DT2811_ADDATLO);
i = inb(dev->iobase + DT2811_ADDATHI);
printk("(irq = %d)\n", irq);
- ret = comedi_request_irq(irq, dt2811_interrupt, 0,
+ ret = request_irq(irq, dt2811_interrupt, 0,
driver_name, dev);
if (ret < 0)
return -EIO;
printk("comedi%d: dt2811: remove\n", dev->minor);
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
if (dev->iobase) {
release_region(dev->iobase, DT2811_SIZE);
for (i = 0; i < DT2814_TIMEOUT; i++) {
status = inb(dev->iobase + DT2814_CSR);
printk("dt2814: status: %02x\n", status);
- comedi_udelay(10);
+ udelay(10);
if (status & DT2814_FINISH)
break;
}
dev->board_name = "dt2814";
outb(0, dev->iobase + DT2814_CSR);
- comedi_udelay(100);
+ udelay(100);
if (inb(dev->iobase + DT2814_CSR) & DT2814_ERR) {
printk("reset error (fatal)\n");
return -EIO;
outb(0, dev->iobase + DT2814_CSR);
- comedi_udelay(100);
+ udelay(100);
irq = probe_irq_off(irqs);
restore_flags(flags);
#endif
dev->irq = 0;
if (irq > 0) {
- if (comedi_request_irq(irq, dt2814_interrupt, 0, "dt2814", dev)) {
+ if (request_irq(irq, dt2814_interrupt, 0, "dt2814", dev)) {
printk("(irq %d unavailable)\n", irq);
} else {
printk("( irq = %d )\n", irq);
printk("comedi%d: dt2814: remove\n", dev->minor);
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
if (dev->iobase) {
release_region(dev->iobase, DT2814_SIZE);
status = dt2815_wait_for_status(dev, 0x00);
if (status != 0) {
- rt_printk
+ printk
("dt2815: failed to write low byte on %d reason %x\n",
chan, status);
return -EBUSY;
status = dt2815_wait_for_status(dev, 0x10);
if (status != 0x10) {
- rt_printk
+ printk
("dt2815: failed to write high byte on %d reason %x\n",
chan, status);
return -EBUSY;
/* This is incredibly slow (approx 20 ms) */
unsigned int status;
- comedi_udelay(1000);
+ udelay(1000);
status = inb(dev->iobase + DT2815_STATUS);
if (status == 4) {
unsigned int program;
int _i; \
for (_i=0;_i<DT2821_TIMEOUT;_i++){ \
if (a){_i=0;break;} \
- comedi_udelay(5); \
+ udelay(5); \
} \
if (_i){b} \
}while (0)
size = cfc_read_array_from_buffer(s, ptr, devpriv->dma_maxsize);
if (size == 0) {
- rt_printk("dt282x: AO underrun\n");
+ printk("dt282x: AO underrun\n");
dt282x_ao_cancel(dev, s);
s->async->events |= COMEDI_CB_OVERFLOW;
return;
size = cfc_read_array_from_buffer(s, devpriv->dma[0].buf,
devpriv->dma_maxsize);
if (size == 0) {
- rt_printk("dt282x: AO underrun\n");
+ printk("dt282x: AO underrun\n");
return -EPIPE;
}
prep_ao_dma(dev, 0, size);
size = cfc_read_array_from_buffer(s, devpriv->dma[1].buf,
devpriv->dma_maxsize);
if (size == 0) {
- rt_printk("dt282x: AO underrun\n");
+ printk("dt282x: AO underrun\n");
return -EPIPE;
}
prep_ao_dma(dev, 1, size);
/* trigger interrupt */
- comedi_udelay(100);
+ udelay(100);
irq = probe_irq_off(irqs);
restore_flags(flags);
#endif
if (irq > 0) {
printk(" ( irq = %d )", irq);
- ret = comedi_request_irq(irq, dt282x_interrupt, 0, "dt282x",
- dev);
+ ret = request_irq(irq, dt282x_interrupt, 0, "dt282x", dev);
if (ret < 0) {
printk(" failed to get irq\n");
return -EIO;
static void free_resources(struct comedi_device *dev)
{
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
if (dev->iobase)
release_region(dev->iobase, DT2821_SIZE);
status = readw(devpriv->io_addr + DPR_Command_Mbx);
if ((status & DT3000_COMPLETION_MASK) != DT3000_NOTPROCESSED)
break;
- comedi_udelay(1);
+ udelay(1);
}
if ((status & DT3000_COMPLETION_MASK) == DT3000_NOERROR) {
return 0;
dev->board_name = this_board->name;
- if (comedi_request_irq(devpriv->pci_dev->irq, dt3k_interrupt,
- IRQF_SHARED, "dt3000", dev)) {
+ if (request_irq(devpriv->pci_dev->irq, dt3k_interrupt, IRQF_SHARED,
+ "dt3000", dev)) {
printk(" unable to allocate IRQ %u\n", devpriv->pci_dev->irq);
return -EINVAL;
}
static int dt3000_detach(struct comedi_device *dev)
{
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (devpriv) {
if (devpriv->pci_dev) {
outb(chan, iobase + 2); /* select chan */
outb(0, iobase + 3); /* start conversion */
/* XXX should test "done" flag instead of delay */
- comedi_udelay(30); /* sleep 30 usec */
+ udelay(30); /* sleep 30 usec */
lo_byte = inb(iobase + 2); /* low 8 byte */
hi_byte = inb(iobase + 3) & 0xf; /* high 4 bit and mask */
data[n] = lo_byte + (hi_byte << 8);
/* #define HPDI_DEBUG enable debugging code */
#ifdef HPDI_DEBUG
-#define DEBUG_PRINT(format, args...) rt_printk(format , ## args)
+#define DEBUG_PRINT(format, args...) printk(format , ## args)
#else
#define DEBUG_PRINT(format, args...)
#endif
int command_channel_valid(unsigned int channel)
{
if (channel == 0 || channel > 6) {
- rt_printk("gsc_hpdi: bug! invalid cable command channel\n");
+ printk("gsc_hpdi: bug! invalid cable command channel\n");
return 0;
}
return 1;
uint32_t plx_intcsr_bits;
writel(BOARD_RESET_BIT, priv(dev)->hpdi_iobase + BOARD_CONTROL_REG);
- comedi_udelay(10);
+ udelay(10);
writel(almost_empty_bits(32) | almost_full_bits(32),
priv(dev)->hpdi_iobase + RX_PROG_ALMOST_REG);
init_plx9080(dev);
/* get irq */
- if (comedi_request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
+ if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
driver_hpdi.driver_name, dev)) {
printk(" unable to allocate irq %u\n", pcidev->irq);
return -EINVAL;
printk("comedi%d: gsc_hpdi: remove\n", dev->minor);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (priv(dev)) {
if (priv(dev)->hw_dev) {
if (priv(dev)->plx9080_iobase) {
writel(bits, priv(dev)->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG);
/* spinlock for plx dma control/status reg */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
/* enable dma transfer */
writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT | PLX_CLEAR_DMA_INTR_BIT,
priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
if (cmd->stop_src == TRIG_COUNT)
priv(dev)->dio_count = cmd->stop_arg;
priv(dev)->hpdi_iobase + INTERRUPT_STATUS_REG);
}
/* spin lock makes sure noone else changes plx dma control reg */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
if (plx_status & ICS_DMA0_A) { /* dma chan 0 interrupt */
writeb((dma0_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
}
DEBUG_PRINT(" cleared dma ch0 interrupt\n");
}
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* spin lock makes sure noone else changes plx dma control reg */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
if (plx_status & ICS_DMA1_A) /* XXX */
{ /* dma chan 1 interrupt */
DEBUG_PRINT(" cleared dma ch1 interrupt\n");
}
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* clear possible plx9080 interrupt sources */
if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */
unsigned long flags;
/* spinlock for plx dma control/status reg */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
plx9080_abort_dma(priv(dev)->plx9080_iobase, channel);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
}
static int hpdi_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
readw(devpriv->io_addr + ICP_MULTI_ADC_CSR));
#endif
- comedi_udelay(1);
+ udelay(1);
#ifdef ICP_MULTI_EXTDEBUG
printk("icp multi C n=%d ST=%4x\n", n,
ICP_MULTI_ADC_CSR));
#endif
- comedi_udelay(1);
+ udelay(1);
}
/* If we reach here, a timeout has occurred */
ICP_MULTI_DAC_CSR));
#endif
- comedi_udelay(1);
+ udelay(1);
}
/* If we reach here, a timeout has occurred */
devpriv->io_addr + ICP_MULTI_DAC_CSR);
/* Delay to allow DAC time to recover */
- comedi_udelay(1);
+ udelay(1);
}
/* Digital outputs to 0 */
writew(0, devpriv->io_addr + ICP_MULTI_DO);
if (this_board->have_irq) {
if (irq) {
- if (comedi_request_irq(irq, interrupt_service_icp_multi,
+ if (request_irq(irq, interrupt_service_icp_multi,
IRQF_SHARED, "Inova Icp Multi", dev)) {
printk(", unable to allocate IRQ %u, DISABLING IT", irq);
irq = 0; /* Can't use IRQ */
icp_multi_reset(dev);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (dev->private && devpriv->io_addr)
iounmap(devpriv->io_addr);
int i;
if (!inova) {
- rt_printk(" - BUG!! inova is NULL!\n");
+ printk(" - BUG!! inova is NULL!\n");
return -1;
}
if (inova->used)
return 1;
if (comedi_pci_enable(inova->pcidev, "icp_multi")) {
- rt_printk(" - Can't enable PCI device and request regions!\n");
+ printk(" - Can't enable PCI device and request regions!\n");
return -1;
}
/* Resources will be accurate now. */
card = find_free_pci_card_by_device(vendor_id, device_id);
if (card == NULL) {
- rt_printk(" - Unused card not found in system!\n");
+ printk(" - Unused card not found in system!\n");
return NULL;
}
} else {
switch (find_free_pci_card_by_position(vendor_id, device_id,
pci_bus, pci_slot, &card)) {
case 1:
- rt_printk
+ printk
(" - Card not found on requested position b:s %d:%d!\n",
pci_bus, pci_slot);
return NULL;
case 2:
- rt_printk
+ printk
(" - Card on requested position is used b:s %d:%d!\n",
pci_bus, pci_slot);
return NULL;
err = pci_card_alloc(card);
if (err != 0) {
if (err > 0)
- rt_printk(" - Can't allocate card!\n");
+ printk(" - Can't allocate card!\n");
/* else: error already printed. */
return NULL;
}
set_u16(&channel->transforms[num].link[i].link_type,
transf.link[i].link_type);
- comedi_udelay(1);
+ udelay(1);
set_s16(&channel->transforms[num].link[i].link_amount,
transf.link[i].link_amount);
- comedi_udelay(1);
+ udelay(1);
if (transf.link[i].link_type == end_x_form) {
break;
}
channel[i].
program_low
[addr], data1);
- comedi_udelay(1);
+ udelay(1);
set_u16(&p->iobase->
channel[i].
program_high
[addr], data2);
- comedi_udelay(1);
+ udelay(1);
}
}
int delay;
int i;
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
delay = 1000;
now = jiffies;
/* Poll all channels that are ready to be polled */
}
}
}
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
devpriv->timer.expires = jiffies + msecs_to_jiffies(delay);
add_timer(&devpriv->timer);
s->insn_read = me4000_ai_insn_read;
if (info->irq > 0) {
- if (comedi_request_irq(info->irq, me4000_ai_isr,
+ if (request_irq(info->irq, me4000_ai_isr,
IRQF_SHARED, "ME-4000", dev)) {
printk("comedi%d: me4000: me4000_attach(): Unable to allocate irq\n", dev->minor);
} else {
struct mite_channel *channel = NULL;
/* spin lock so mite_release_channel can be called safely from interrupts */
- comedi_spin_lock_irqsave(&mite->lock, flags);
+ spin_lock_irqsave(&mite->lock, flags);
for (i = min_channel; i <= max_channel; ++i) {
if (mite->channel_allocated[i] == 0) {
mite->channel_allocated[i] = 1;
break;
}
}
- comedi_spin_unlock_irqrestore(&mite->lock, flags);
+ spin_unlock_irqrestore(&mite->lock, flags);
return channel;
}
unsigned long flags;
/* spin lock to prevent races with mite_request_channel */
- comedi_spin_lock_irqsave(&mite->lock, flags);
+ spin_lock_irqsave(&mite->lock, flags);
if (mite->channel_allocated[mite_chan->channel]) {
mite_dma_disarm(mite_chan);
mite_dma_reset(mite_chan);
mite_chan->ring = NULL;
mmiowb();
}
- comedi_spin_unlock_irqrestore(&mite->lock, flags);
+ spin_unlock_irqrestore(&mite->lock, flags);
}
void mite_dma_arm(struct mite_channel *mite_chan)
smp_mb();
/* arm */
chor = CHOR_START;
- comedi_spin_lock_irqsave(&mite->lock, flags);
+ spin_lock_irqsave(&mite->lock, flags);
mite_chan->done = 0;
writel(chor, mite->mite_io_addr + MITE_CHOR(mite_chan->channel));
mmiowb();
- comedi_spin_unlock_irqrestore(&mite->lock, flags);
+ spin_unlock_irqrestore(&mite->lock, flags);
/* mite_dma_tcr(mite, channel); */
}
mcr |= CR_PSIZE32;
break;
default:
- rt_printk
+ printk
("mite: bug! invalid mem bit width for dma transfer\n");
break;
}
dcr |= CR_PSIZE32;
break;
default:
- rt_printk
+ printk
("mite: bug! invalid dev bit width for dma transfer\n");
break;
}
nbytes = mite_bytes_written_to_memory_lb(mite_chan);
if ((int)(mite_bytes_written_to_memory_ub(mite_chan) -
old_alloc_count) > 0) {
- rt_printk("mite: DMA overwrite of free area\n");
+ printk("mite: DMA overwrite of free area\n");
async->events |= COMEDI_CB_OVERFLOW;
return -1;
}
(int)(nbytes_ub - stop_count) > 0)
nbytes_ub = stop_count;
if ((int)(nbytes_ub - old_alloc_count) > 0) {
- rt_printk("mite: DMA underrun\n");
+ printk("mite: DMA underrun\n");
async->events |= COMEDI_CB_OVERFLOW;
return -1;
}
unsigned status;
unsigned long flags;
- comedi_spin_lock_irqsave(&mite->lock, flags);
+ spin_lock_irqsave(&mite->lock, flags);
status = readl(mite->mite_io_addr + MITE_CHSR(mite_chan->channel));
if (status & CHSR_DONE) {
mite_chan->done = 1;
mite->mite_io_addr + MITE_CHOR(mite_chan->channel));
}
mmiowb();
- comedi_spin_unlock_irqrestore(&mite->lock, flags);
+ spin_unlock_irqrestore(&mite->lock, flags);
return status;
}
int done;
mite_get_status(mite_chan);
- comedi_spin_lock_irqsave(&mite->lock, flags);
+ spin_lock_irqsave(&mite->lock, flags);
done = mite_chan->done;
- comedi_spin_unlock_irqrestore(&mite->lock, flags);
+ spin_unlock_irqrestore(&mite->lock, flags);
return done;
}
value++;
}
if (value > 0x7)
- rt_printk("comedi: bug! retry_limit too large\n");
+ printk("comedi: bug! retry_limit too large\n");
return (value & 0x7) << 21;
}
unsigned long iobase;
iobase = it->options[0];
- rt_printk("comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase);
+ printk("comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase);
if (request_region(iobase, MPC624_SIZE, "mpc624") == NULL) {
- rt_printk("I/O port(s) in use\n");
+ printk("I/O port(s) in use\n");
return -EIO;
}
switch (it->options[1]) {
case 0:
devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
- rt_printk("3.52 kHz, ");
+ printk("3.52 kHz, ");
break;
case 1:
devpriv->ulConvertionRate = MPC624_SPEED_1_76_kHz;
- rt_printk("1.76 kHz, ");
+ printk("1.76 kHz, ");
break;
case 2:
devpriv->ulConvertionRate = MPC624_SPEED_880_Hz;
- rt_printk("880 Hz, ");
+ printk("880 Hz, ");
break;
case 3:
devpriv->ulConvertionRate = MPC624_SPEED_440_Hz;
- rt_printk("440 Hz, ");
+ printk("440 Hz, ");
break;
case 4:
devpriv->ulConvertionRate = MPC624_SPEED_220_Hz;
- rt_printk("220 Hz, ");
+ printk("220 Hz, ");
break;
case 5:
devpriv->ulConvertionRate = MPC624_SPEED_110_Hz;
- rt_printk("110 Hz, ");
+ printk("110 Hz, ");
break;
case 6:
devpriv->ulConvertionRate = MPC624_SPEED_55_Hz;
- rt_printk("55 Hz, ");
+ printk("55 Hz, ");
break;
case 7:
devpriv->ulConvertionRate = MPC624_SPEED_27_5_Hz;
- rt_printk("27.5 Hz, ");
+ printk("27.5 Hz, ");
break;
case 8:
devpriv->ulConvertionRate = MPC624_SPEED_13_75_Hz;
- rt_printk("13.75 Hz, ");
+ printk("13.75 Hz, ");
break;
case 9:
devpriv->ulConvertionRate = MPC624_SPEED_6_875_Hz;
- rt_printk("6.875 Hz, ");
+ printk("6.875 Hz, ");
break;
default:
- rt_printk
+ printk
("illegal convertion rate setting! Valid numbers are 0..9. Using 9 => 6.875 Hz, ");
devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
}
switch (it->options[1]) {
default:
s->maxdata = 0x3FFFFFFF;
- rt_printk("30 bit, ");
+ printk("30 bit, ");
}
switch (it->options[1]) {
case 0:
s->range_table = &range_mpc624_bipolar1;
- rt_printk("1.01V]: ");
+ printk("1.01V]: ");
break;
default:
s->range_table = &range_mpc624_bipolar10;
- rt_printk("10.1V]: ");
+ printk("10.1V]: ");
}
s->len_chanlist = 1;
s->insn_read = mpc624_ai_rinsn;
- rt_printk("attached\n");
+ printk("attached\n");
return 1;
}
static int mpc624_detach(struct comedi_device *dev)
{
- rt_printk("comedi%d: mpc624: remove\n", dev->minor);
+ printk("comedi%d: mpc624: remove\n", dev->minor);
if (dev->iobase)
release_region(dev->iobase, MPC624_SIZE);
/* WARNING: We always write 0 to GNSWA bit, so the channel range is +-/10.1Vdc */
outb(insn->chanspec, dev->iobase + MPC624_GNMUXCH);
-/* rt_printk("Channel %d: \n", insn->chanspec); */
+/* printk("Channel %d: \n", insn->chanspec); */
if (!insn->n) {
- rt_printk("MPC624: Warning, no data to aquire\n");
+ printk("MPC624: Warning, no data to aquire\n");
return 0;
}
for (n = 0; n < insn->n; n++) {
/* Trigger the convertion */
outb(MPC624_ADSCK, dev->iobase + MPC624_ADC);
- comedi_udelay(1);
+ udelay(1);
outb(MPC624_ADCS | MPC624_ADSCK, dev->iobase + MPC624_ADC);
- comedi_udelay(1);
+ udelay(1);
outb(0, dev->iobase + MPC624_ADC);
- comedi_udelay(1);
+ udelay(1);
/* Wait for the convertion to end */
for (i = 0; i < TIMEOUT; i++) {
ucPort = inb(dev->iobase + MPC624_ADC);
if (ucPort & MPC624_ADBUSY)
- comedi_udelay(1000);
+ udelay(1000);
else
break;
}
if (i == TIMEOUT) {
- rt_printk("MPC624: timeout (%dms)\n", TIMEOUT);
+ printk("MPC624: timeout (%dms)\n", TIMEOUT);
data[n] = 0;
return -ETIMEDOUT;
}
/* Start reading data */
data_in = 0;
data_out = devpriv->ulConvertionRate;
- comedi_udelay(1);
+ udelay(1);
for (i = 0; i < 32; i++) {
/* Set the clock low */
outb(0, dev->iobase + MPC624_ADC);
- comedi_udelay(1);
+ udelay(1);
if (data_out & (1 << 31)) /* the next bit is a 1 */
{
/* Set the ADSDI line (send to MPC624) */
outb(MPC624_ADSDI, dev->iobase + MPC624_ADC);
- comedi_udelay(1);
+ udelay(1);
/* Set the clock high */
outb(MPC624_ADSCK | MPC624_ADSDI,
dev->iobase + MPC624_ADC);
{
/* Set the ADSDI line (send to MPC624) */
outb(0, dev->iobase + MPC624_ADC);
- comedi_udelay(1);
+ udelay(1);
/* Set the clock high */
outb(MPC624_ADSCK, dev->iobase + MPC624_ADC);
}
/* Read ADSDO on high clock (receive from MPC624) */
- comedi_udelay(1);
+ udelay(1);
data_in <<= 1;
data_in |=
(inb(dev->iobase +
MPC624_ADC) & MPC624_ADSDO) >> 4;
- comedi_udelay(1);
+ udelay(1);
data_out <<= 1;
}
/* 00: sub-LSB */
if (data_in & MPC624_EOC_BIT)
- rt_printk("MPC624: EOC bit is set (data_in=%lu)!",
+ printk("MPC624: EOC bit is set (data_in=%lu)!",
data_in);
if (data_in & MPC624_DMY_BIT)
- rt_printk("MPC624: DMY bit is set (data_in=%lu)!",
+ printk("MPC624: DMY bit is set (data_in=%lu)!",
data_in);
if (data_in & MPC624_SGN_BIT) /* check the sign bit */
{ /* The voltage is positive */
devpriv->mite->daq_io_addr + Clear_Register);
writeb(0x00, devpriv->mite->daq_io_addr + Master_Interrupt_Control);
- ret = comedi_request_irq(mite_irq(devpriv->mite), ni6527_interrupt,
- IRQF_SHARED, "ni6527", dev);
+ ret = request_irq(mite_irq(devpriv->mite), ni6527_interrupt,
+ IRQF_SHARED, "ni6527", dev);
if (ret < 0) {
printk(" irq not available");
} else
}
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
if (devpriv && devpriv->mite) {
writeb(bits,
private(dev)->mite->daq_io_addr +
Port_Data(port));
-/* rt_printk("wrote 0x%x to port %i\n", bits, port); */
+/* printk("wrote 0x%x to port %i\n", bits, port); */
}
port_read_bits =
readb(private(dev)->mite->daq_io_addr +
Port_Data(port));
-/* rt_printk("read 0x%x from port %i\n", port_read_bits, port); */
+/* printk("read 0x%x from port %i\n", port_read_bits, port); */
if (bitshift > 0) {
port_read_bits <<= bitshift;
} else {
/* Set filter interval to 0 (32bit reg) */
writeb(0x00000000, private(dev)->mite->daq_io_addr + Filter_Interval);
- ret = comedi_request_irq(dev->irq, ni_65xx_interrupt, IRQF_SHARED,
- "ni_65xx", dev);
+ ret = request_irq(dev->irq, ni_65xx_interrupt, IRQF_SHARED,
+ "ni_65xx", dev);
if (ret < 0) {
dev->irq = 0;
printk(" irq not available");
}
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
if (private(dev)) {
ni_660x_register = G3InterruptEnable;
break;
default:
- rt_printk("%s: unhandled register 0x%x in switch.\n",
+ printk("%s: unhandled register 0x%x in switch.\n",
__func__, reg);
BUG();
return 0;
writel(bits, write_address);
break;
default:
- rt_printk("%s: %s: bug! unhandled case (reg=0x%x) in switch.\n",
+ printk("%s: %s: bug! unhandled case (reg=0x%x) in switch.\n",
__FILE__, __func__, reg);
BUG();
break;
return readl(read_address);
break;
default:
- rt_printk("%s: %s: bug! unhandled case (reg=0x%x) in switch.\n",
+ printk("%s: %s: bug! unhandled case (reg=0x%x) in switch.\n",
__FILE__, __func__, reg);
BUG();
break;
unsigned mite_channel, struct ni_gpct *counter)
{
unsigned long flags;
- comedi_spin_lock_irqsave(&private(dev)->soft_reg_copy_lock, flags);
+ spin_lock_irqsave(&private(dev)->soft_reg_copy_lock, flags);
private(dev)->dma_configuration_soft_copies[counter->chip_index] &=
~dma_select_mask(mite_channel);
private(dev)->dma_configuration_soft_copies[counter->chip_index] |=
chip_index] | dma_reset_bit(mite_channel),
DMAConfigRegister);
mmiowb();
- comedi_spin_unlock_irqrestore(&private(dev)->soft_reg_copy_lock, flags);
+ spin_unlock_irqrestore(&private(dev)->soft_reg_copy_lock, flags);
}
static inline void ni_660x_unset_dma_channel(struct comedi_device *dev,
unsigned mite_channel, struct ni_gpct *counter)
{
unsigned long flags;
- comedi_spin_lock_irqsave(&private(dev)->soft_reg_copy_lock, flags);
+ spin_lock_irqsave(&private(dev)->soft_reg_copy_lock, flags);
private(dev)->dma_configuration_soft_copies[counter->chip_index] &=
~dma_select_mask(mite_channel);
private(dev)->dma_configuration_soft_copies[counter->chip_index] |=
private(dev)->dma_configuration_soft_copies[counter->
chip_index], DMAConfigRegister);
mmiowb();
- comedi_spin_unlock_irqrestore(&private(dev)->soft_reg_copy_lock, flags);
+ spin_unlock_irqrestore(&private(dev)->soft_reg_copy_lock, flags);
}
static int ni_660x_request_mite_channel(struct comedi_device *dev,
unsigned long flags;
struct mite_channel *mite_chan;
- comedi_spin_lock_irqsave(&private(dev)->mite_channel_lock, flags);
+ spin_lock_irqsave(&private(dev)->mite_channel_lock, flags);
BUG_ON(counter->mite_chan);
mite_chan =
mite_request_channel(private(dev)->mite, mite_ring(private(dev),
counter));
if (mite_chan == NULL) {
- comedi_spin_unlock_irqrestore(&private(dev)->mite_channel_lock,
+ spin_unlock_irqrestore(&private(dev)->mite_channel_lock,
flags);
comedi_error(dev,
"failed to reserve mite dma channel for counter.");
mite_chan->dir = direction;
ni_tio_set_mite_channel(counter, mite_chan);
ni_660x_set_dma_channel(dev, mite_chan->channel, counter);
- comedi_spin_unlock_irqrestore(&private(dev)->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&private(dev)->mite_channel_lock, flags);
return 0;
}
{
unsigned long flags;
- comedi_spin_lock_irqsave(&private(dev)->mite_channel_lock, flags);
+ spin_lock_irqsave(&private(dev)->mite_channel_lock, flags);
if (counter->mite_chan) {
struct mite_channel *mite_chan = counter->mite_chan;
ni_tio_set_mite_channel(counter, NULL);
mite_release_channel(mite_chan);
}
- comedi_spin_unlock_irqrestore(&private(dev)->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&private(dev)->mite_channel_lock, flags);
}
static int ni_660x_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
if (dev->attached == 0)
return IRQ_NONE;
/* lock to avoid race with comedi_poll */
- comedi_spin_lock_irqsave(&private(dev)->interrupt_lock, flags);
+ spin_lock_irqsave(&private(dev)->interrupt_lock, flags);
smp_mb();
for (i = 0; i < ni_660x_num_counters(dev); ++i) {
s = dev->subdevices + NI_660X_GPCT_SUBDEV(i);
ni_660x_handle_gpct_interrupt(dev, s);
}
- comedi_spin_unlock_irqrestore(&private(dev)->interrupt_lock, flags);
+ spin_unlock_irqrestore(&private(dev)->interrupt_lock, flags);
return IRQ_HANDLED;
}
{
unsigned long flags;
/* lock to avoid race with comedi_poll */
- comedi_spin_lock_irqsave(&private(dev)->interrupt_lock, flags);
+ spin_lock_irqsave(&private(dev)->interrupt_lock, flags);
mite_sync_input_dma(subdev_to_counter(s)->mite_chan, s->async);
- comedi_spin_unlock_irqrestore(&private(dev)->interrupt_lock, flags);
+ spin_unlock_irqrestore(&private(dev)->interrupt_lock, flags);
return comedi_buf_read_n_available(s->async);
}
for (i = 0; i < board(dev)->n_chips; ++i) {
set_tio_counterswap(dev, i);
}
- ret = comedi_request_irq(mite_irq(private(dev)->mite),
- ni_660x_interrupt, IRQF_SHARED, "ni_660x",
- dev);
-
+ ret = request_irq(mite_irq(private(dev)->mite), ni_660x_interrupt,
+ IRQF_SHARED, "ni_660x", dev);
if (ret < 0) {
printk(" irq not available\n");
return ret;
/* Free irq */
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (dev->private) {
if (private(dev)->counter_dev)
mite_unsetup(devpriv->mite);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
return 0;
}
static void ni_dump_regs(struct comedi_device *dev)
{
- rt_printk("config bits 0x%x\n", devpriv->config_bits);
- rt_printk("irq dma bits 0x%x\n", devpriv->irq_dma_bits);
- rt_printk("status bits 0x%x\n", inw(dev->iobase + STATUS_REG));
+ printk("config bits 0x%x\n", devpriv->config_bits);
+ printk("irq dma bits 0x%x\n", devpriv->irq_dma_bits);
+ printk("status bits 0x%x\n", inw(dev->iobase + STATUS_REG));
}
#endif
printk(" invalid irq line %u\n", irq);
return -EINVAL;
}
- if (comedi_request_irq(irq, a2150_interrupt, 0,
+ if (request_irq(irq, a2150_interrupt, 0,
driver_a2150.driver_name, dev)) {
printk("unable to allocate irq %u\n", irq);
return -EINVAL;
for (i = 0; i < timeout; i++) {
if ((DCAL_BIT & inw(dev->iobase + STATUS_REG)) == 0)
break;
- comedi_udelay(1000);
+ udelay(1000);
}
if (i == timeout) {
printk(" timed out waiting for offset calibration to complete\n");
}
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (devpriv) {
if (devpriv->dma)
free_dma(devpriv->dma);
for (i = 0; i < timeout; i++) {
if (inw(dev->iobase + STATUS_REG) & FNE_BIT)
break;
- comedi_udelay(1);
+ udelay(1);
}
if (i == timeout) {
comedi_error(dev, "timeout");
for (i = 0; i < timeout; i++) {
if (inw(dev->iobase + STATUS_REG) & FNE_BIT)
break;
- comedi_udelay(1);
+ udelay(1);
}
if (i == timeout) {
comedi_error(dev, "timeout");
#endif
data[n] = inw(dev->iobase + FIFO_DATA_REG);
#ifdef A2150_DEBUG
- rt_printk(" data is %i\n", data[n]);
+ printk(" data is %i\n", data[n]);
#endif
data[n] ^= 0x8000;
}
{
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+ spin_lock_irqsave(&devpriv->window_lock, flags);
if ((addr) < 8) {
ni_writew(data, addr * 2);
} else {
ni_writew(addr, Window_Address);
ni_writew(data, Window_Data);
}
- comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+ spin_unlock_irqrestore(&devpriv->window_lock, flags);
}
static uint16_t ni_atmio_win_in(struct comedi_device *dev, int addr)
unsigned long flags;
uint16_t ret;
- comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+ spin_lock_irqsave(&devpriv->window_lock, flags);
if (addr < 8) {
ret = ni_readw(addr * 2);
} else {
ni_writew(addr, Window_Address);
ret = ni_readw(Window_Data);
}
- comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+ spin_unlock_irqrestore(&devpriv->window_lock, flags);
return ret;
}
if (dev->iobase)
release_region(dev->iobase, NI_SIZE);
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
if (devpriv->isapnp_dev)
pnp_device_detach(devpriv->isapnp_dev);
return -EINVAL;
}
printk(" ( irq = %u )", irq);
- ret = comedi_request_irq(irq, ni_E_interrupt,
- NI_E_IRQ_FLAGS, "ni_atmio", dev);
+ ret = request_irq(irq, ni_E_interrupt, NI_E_IRQ_FLAGS,
+ "ni_atmio", dev);
if (ret < 0) {
printk(" irq not available\n");
}
/* end waiting, now check if it timed out */
if (t == ATMIO16D_TIMEOUT) {
- rt_printk("atmio16d: timeout\n");
+ printk("atmio16d: timeout\n");
return -ETIME;
}
irq = it->options[1];
if (irq) {
- ret = comedi_request_irq(irq, atmio16d_interrupt,
- 0, "atmio16d", dev);
+ ret = request_irq(irq, atmio16d_interrupt, 0, "atmio16d", dev);
if (ret < 0) {
printk("failed to allocate irq %u\n", irq);
return ret;
subdev_8255_cleanup(dev, dev->subdevices + 3);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
reset_atmio16d(dev);
if (thisboard->bustype != pcmcia_bustype && dev->iobase)
release_region(dev->iobase, DIO700_SIZE);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
return 0;
};
if (thisboard->bustype != pcmcia_bustype && dev->iobase)
release_region(dev->iobase, DIO24_SIZE);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
return 0;
};
isr_flags = 0;
if (thisboard->bustype == pci_bustype)
isr_flags |= IRQF_SHARED;
- if (comedi_request_irq(irq, labpc_interrupt, isr_flags,
+ if (request_irq(irq, labpc_interrupt, isr_flags,
driver_labpc.driver_name, dev)) {
printk("unable to allocate irq %u\n", irq);
return -EINVAL;
if (devpriv->dma_chan)
free_dma(devpriv->dma_chan);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (thisboard->bustype == isa_bustype && dev->iobase)
release_region(dev->iobase, LABPC_SIZE);
#ifdef CONFIG_COMEDI_PCI
{
unsigned long flags;
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
devpriv->command3_bits = 0;
devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
if (CR_CHAN(cmd->chanlist[0]) > CR_CHAN(cmd->chanlist[1]))
return MODE_MULT_CHAN_DOWN;
- rt_printk("ni_labpc: bug! this should never happen\n");
+ printk("ni_labpc: bug! this should never happen\n");
return 0;
}
}
break;
default:
- rt_printk("ni_labpc: bug! in chanlist check\n");
+ printk("ni_labpc: bug! in chanlist check\n");
return 1;
break;
}
aref = CR_AREF(cmd->chanlist[0]);
/* make sure board is disabled before setting up aquisition */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
devpriv->command3_bits = 0;
devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
devpriv->command1_bits |= ADC_SCAN_EN_BIT;
/* need a brief delay before enabling scan, or scan list will get screwed when you switch
* between scan up to scan down mode - dunno why */
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command1_bits,
dev->iobase + COMMAND1_REG);
}
/* command2 reg */
/* use 2 cascaded counters for pacing */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
devpriv->command2_bits |= CASCADE_BIT;
switch (cmd->start_src) {
case TRIG_EXT:
return -1;
}
devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return 0;
}
unsigned long flags;
/* disable timed conversions */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* disable interrupt generation and dma */
devpriv->command3_bits = 0;
if (devpriv->read_byte(dev->iobase +
STATUS1_REG) & DATA_AVAIL_BIT)
break;
- comedi_udelay(1);
+ udelay(1);
}
if (i == timeout) {
comedi_error(dev, "timeout");
/* turn off pacing of analog output channel */
/* note: hardware bug in daqcard-1200 means pacing cannot
* be independently enabled/disabled for its the two channels */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
devpriv->command2_bits &= ~DAC_PACED_BIT(channel);
devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
/* set range */
if (thisboard->register_layout == labpc_1200_layout) {
devpriv->command5_bits |= SDATA_BIT;
else
devpriv->command5_bits &= ~SDATA_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits,
dev->iobase + COMMAND5_REG);
/* set clock to load bit */
devpriv->command5_bits |= SCLOCK_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits,
dev->iobase + COMMAND5_REG);
}
for (i = 1; i <= value_width; i++) {
/* set serial clock */
devpriv->command5_bits |= SCLOCK_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits,
dev->iobase + COMMAND5_REG);
/* clear clock bit */
devpriv->command5_bits &= ~SCLOCK_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits,
dev->iobase + COMMAND5_REG);
/* read bits most significant bit first */
- comedi_udelay(1);
+ udelay(1);
devpriv->status2_bits =
devpriv->read_byte(dev->iobase + STATUS2_REG);
if (devpriv->status2_bits & EEPROM_OUT_BIT) {
/* enable read/write to eeprom */
devpriv->command5_bits &= ~EEPROM_EN_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
devpriv->command5_bits |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
/* send read instruction */
/* disable read/write to eeprom */
devpriv->command5_bits &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
return value;
/* enable read/write to eeprom */
devpriv->command5_bits &= ~EEPROM_EN_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
devpriv->command5_bits |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
/* send write_enable instruction */
labpc_serial_out(dev, write_enable_instruction, write_length);
devpriv->command5_bits &= ~EEPROM_EN_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
/* send write instruction */
devpriv->command5_bits |= EEPROM_EN_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
labpc_serial_out(dev, write_instruction, write_length);
/* send 8 bit address to write to */
/* write value */
labpc_serial_out(dev, value, write_length);
devpriv->command5_bits &= ~EEPROM_EN_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
/* disable read/write to eeprom */
devpriv->command5_bits &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
return 0;
/* enable read/write to eeprom */
devpriv->command5_bits &= ~EEPROM_EN_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
devpriv->command5_bits |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
/* send read status instruction */
/* disable read/write to eeprom */
devpriv->command5_bits &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
return value;
/* clear caldac load bit and make sure we don't write to eeprom */
devpriv->command5_bits &=
~CALDAC_LOAD_BIT & ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
/* write 4 bit channel */
/* set and clear caldac bit to load caldac value */
devpriv->command5_bits |= CALDAC_LOAD_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
devpriv->command5_bits &= ~CALDAC_LOAD_BIT;
- comedi_udelay(1);
+ udelay(1);
devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
}
{
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags);
+ spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags);
switch (reg) {
case Interrupt_A_Enable_Register:
devpriv->int_a_enable_reg &= ~bit_mask;
ni_writeb(devpriv->g0_g1_select_reg, G0_G1_Select);
break;
default:
- rt_printk("Warning %s() called with invalid register\n",
+ printk("Warning %s() called with invalid register\n",
__func__);
- rt_printk("reg is %d\n", reg);
+ printk("reg is %d\n", reg);
break;
}
mmiowb();
- comedi_spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags);
+ spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags);
}
#ifdef PCIDMA
{
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags);
+ spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags);
devpriv->cdio_dma_select_reg &= ~CDO_DMA_Select_Mask;
if (mite_channel >= 0) {
/*XXX just guessing ni_stc_dma_channel_select_bitfield() returns the right bits,
}
ni_writeb(devpriv->cdio_dma_select_reg, M_Offset_CDIO_DMA_Select);
mmiowb();
- comedi_spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags);
+ spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags);
}
static int ni_request_ai_mite_channel(struct comedi_device *dev)
{
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
BUG_ON(devpriv->ai_mite_chan);
devpriv->ai_mite_chan =
mite_request_channel(devpriv->mite, devpriv->ai_mite_ring);
if (devpriv->ai_mite_chan == NULL) {
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock,
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock,
flags);
comedi_error(dev,
"failed to reserve mite dma channel for analog input.");
}
devpriv->ai_mite_chan->dir = COMEDI_INPUT;
ni_set_ai_dma_channel(dev, devpriv->ai_mite_chan->channel);
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
return 0;
}
{
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
BUG_ON(devpriv->ao_mite_chan);
devpriv->ao_mite_chan =
mite_request_channel(devpriv->mite, devpriv->ao_mite_ring);
if (devpriv->ao_mite_chan == NULL) {
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock,
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock,
flags);
comedi_error(dev,
"failed to reserve mite dma channel for analog outut.");
}
devpriv->ao_mite_chan->dir = COMEDI_OUTPUT;
ni_set_ao_dma_channel(dev, devpriv->ao_mite_chan->channel);
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
return 0;
}
struct mite_channel *mite_chan;
BUG_ON(gpct_index >= NUM_GPCT);
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
BUG_ON(devpriv->counter_dev->counters[gpct_index].mite_chan);
mite_chan =
mite_request_channel(devpriv->mite,
devpriv->gpct_mite_ring[gpct_index]);
if (mite_chan == NULL) {
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock,
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock,
flags);
comedi_error(dev,
"failed to reserve mite dma channel for counter.");
ni_tio_set_mite_channel(&devpriv->counter_dev->counters[gpct_index],
mite_chan);
ni_set_gpct_dma_channel(dev, gpct_index, mite_chan->channel);
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
return 0;
}
#ifdef PCIDMA
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
BUG_ON(devpriv->cdo_mite_chan);
devpriv->cdo_mite_chan =
mite_request_channel(devpriv->mite, devpriv->cdo_mite_ring);
if (devpriv->cdo_mite_chan == NULL) {
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock,
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock,
flags);
comedi_error(dev,
"failed to reserve mite dma channel for correlated digital outut.");
}
devpriv->cdo_mite_chan->dir = COMEDI_OUTPUT;
ni_set_cdo_dma_channel(dev, devpriv->cdo_mite_chan->channel);
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
#endif /* PCIDMA */
return 0;
}
#ifdef PCIDMA
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
if (devpriv->ai_mite_chan) {
ni_set_ai_dma_channel(dev, -1);
mite_release_channel(devpriv->ai_mite_chan);
devpriv->ai_mite_chan = NULL;
}
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
#endif /* PCIDMA */
}
#ifdef PCIDMA
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
if (devpriv->ao_mite_chan) {
ni_set_ao_dma_channel(dev, -1);
mite_release_channel(devpriv->ao_mite_chan);
devpriv->ao_mite_chan = NULL;
}
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
#endif /* PCIDMA */
}
unsigned long flags;
BUG_ON(gpct_index >= NUM_GPCT);
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
if (devpriv->counter_dev->counters[gpct_index].mite_chan) {
struct mite_channel *mite_chan =
devpriv->counter_dev->counters[gpct_index].mite_chan;
counters[gpct_index], NULL);
mite_release_channel(mite_chan);
}
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
#endif /* PCIDMA */
}
#ifdef PCIDMA
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
if (devpriv->cdo_mite_chan) {
ni_set_cdo_dma_channel(dev, -1);
mite_release_channel(devpriv->cdo_mite_chan);
devpriv->cdo_mite_chan = NULL;
}
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
#endif /* PCIDMA */
}
{
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+ spin_lock_irqsave(&devpriv->window_lock, flags);
ni_writew(addr, AO_Window_Address_611x);
ni_writew(data, AO_Window_Data_611x);
- comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+ spin_unlock_irqrestore(&devpriv->window_lock, flags);
}
static inline void ni_ao_win_outl(struct comedi_device *dev, uint32_t data, int addr)
{
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+ spin_lock_irqsave(&devpriv->window_lock, flags);
ni_writew(addr, AO_Window_Address_611x);
ni_writel(data, AO_Window_Data_611x);
- comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+ spin_unlock_irqrestore(&devpriv->window_lock, flags);
}
static inline unsigned short ni_ao_win_inw(struct comedi_device *dev, int addr)
unsigned long flags;
unsigned short data;
- comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+ spin_lock_irqsave(&devpriv->window_lock, flags);
ni_writew(addr, AO_Window_Address_611x);
data = ni_readw(AO_Window_Data_611x);
- comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+ spin_unlock_irqrestore(&devpriv->window_lock, flags);
return data;
}
smp_mb(); /* make sure dev->attached is checked before handler does anything else. */
/* lock to avoid race with comedi_poll */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
a_status = devpriv->stc_readw(dev, AI_Status_1_Register);
b_status = devpriv->stc_readw(dev, AO_Status_1_Register);
#ifdef PCIDMA
if (mite) {
unsigned long flags_too;
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock,
- flags_too);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags_too);
if (devpriv->ai_mite_chan) {
ai_mite_status = mite_get_status(devpriv->ai_mite_chan);
if (ai_mite_status & CHSR_LINKC)
MITE_CHOR(devpriv->ao_mite_chan->
channel));
}
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock,
- flags_too);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags_too);
}
#endif
ack_a_interrupt(dev, a_status);
handle_gpct_interrupt(dev, 1);
handle_cdio_interrupt(dev);
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return IRQ_HANDLED;
}
struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV;
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
if (devpriv->ai_mite_chan)
mite_sync_input_dma(devpriv->ai_mite_chan, s->async);
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
}
static void mite_handle_b_linkc(struct mite_struct *mite, struct comedi_device * dev)
struct comedi_subdevice *s = dev->subdevices + NI_AO_SUBDEV;
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
if (devpriv->ao_mite_chan) {
mite_sync_output_dma(devpriv->ao_mite_chan, s->async);
}
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
}
static int ni_ao_wait_for_dma_load(struct comedi_device *dev)
break;
/* if we poll too often, the pci bus activity seems
to slow the dma transfer down */
- comedi_udelay(10);
+ udelay(10);
}
if (i == timeout) {
comedi_error(dev, "timed out waiting for dma load");
ni_sync_ai_dma(dev);
if ((s->async->events & COMEDI_CB_EOS))
break;
- comedi_udelay(1);
+ udelay(1);
}
#else
ni_handle_fifo_dregs(dev);
return;
#ifdef DEBUG_INTERRUPT
- rt_printk
+ printk
("ni_mio_common: interrupt: a_status=%04x ai_mite_status=%08x\n",
status, ai_mite_status);
ni_mio_print_status_a(status);
if (ai_mite_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_MRDY |
CHSR_DRDY | CHSR_DRQ1 | CHSR_DRQ0 | CHSR_ERROR |
CHSR_SABORT | CHSR_XFERR | CHSR_LxERR_mask)) {
- rt_printk
+ printk
("unknown mite interrupt, ack! (ai_mite_status=%08x)\n",
ai_mite_status);
/* mite_print_chsr(ai_mite_status); */
if (status & (AI_Overrun_St | AI_Overflow_St | AI_SC_TC_Error_St |
AI_SC_TC_St | AI_START1_St)) {
if (status == 0xffff) {
- rt_printk
+ printk
("ni_mio_common: a_status=0xffff. Card removed?\n");
/* we probably aren't even running a command now,
* so it's a good idea to be careful. */
}
if (status & (AI_Overrun_St | AI_Overflow_St |
AI_SC_TC_Error_St)) {
- rt_printk("ni_mio_common: ai error a_status=%04x\n",
+ printk("ni_mio_common: ai error a_status=%04x\n",
status);
ni_mio_print_status_a(status);
}
if (status & AI_SC_TC_St) {
#ifdef DEBUG_INTERRUPT
- rt_printk("ni_mio_common: SC_TC interrupt\n");
+ printk("ni_mio_common: SC_TC interrupt\n");
#endif
if (!devpriv->ai_continuous) {
shutdown_ai_command(dev);
#ifdef DEBUG_INTERRUPT
status = devpriv->stc_readw(dev, AI_Status_1_Register);
if (status & Interrupt_A_St) {
- rt_printk
+ printk
("handle_a_interrupt: didn't clear interrupt? status=0x%x\n",
status);
}
struct comedi_subdevice *s = dev->subdevices + NI_AO_SUBDEV;
/* unsigned short ack=0; */
#ifdef DEBUG_INTERRUPT
- rt_printk("ni_mio_common: interrupt: b_status=%04x m1_status=%08x\n",
+ printk("ni_mio_common: interrupt: b_status=%04x m1_status=%08x\n",
b_status, ao_mite_status);
ni_mio_print_status_b(b_status);
#endif
if (ao_mite_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_MRDY |
CHSR_DRDY | CHSR_DRQ1 | CHSR_DRQ0 | CHSR_ERROR |
CHSR_SABORT | CHSR_XFERR | CHSR_LxERR_mask)) {
- rt_printk
+ printk
("unknown mite interrupt, ack! (ao_mite_status=%08x)\n",
ao_mite_status);
/* mite_print_chsr(ao_mite_status); */
if (b_status == 0xffff)
return;
if (b_status & AO_Overrun_St) {
- rt_printk
+ printk
("ni_mio_common: AO FIFO underrun status=0x%04x status2=0x%04x\n",
b_status, devpriv->stc_readw(dev,
AO_Status_2_Register));
ret = ni_ao_fifo_half_empty(dev, s);
if (!ret) {
- rt_printk("ni_mio_common: AO buffer underrun\n");
+ printk("ni_mio_common: AO buffer underrun\n");
ni_set_bits(dev, Interrupt_B_Enable_Register,
AO_FIFO_Interrupt_Enable |
AO_Error_Interrupt_Enable, 0);
{
int i;
- rt_printk("A status:");
+ printk("A status:");
for (i = 15; i >= 0; i--) {
if (status & (1 << i)) {
- rt_printk(" %s", status_a_strings[i]);
+ printk(" %s", status_a_strings[i]);
}
}
- rt_printk("\n");
+ printk("\n");
}
#endif
{
int i;
- rt_printk("B status:");
+ printk("B status:");
for (i = 15; i >= 0; i--) {
if (status & (1 << i)) {
- rt_printk(" %s", status_b_strings[i]);
+ printk(" %s", status_b_strings[i]);
}
}
- rt_printk("\n");
+ printk("\n");
}
#endif
unsigned long flags;
int retval = 0;
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
if (devpriv->ai_mite_chan) {
for (i = 0; i < timeout; i++) {
if ((devpriv->stc_readw(dev,
&& mite_bytes_in_transit(devpriv->
ai_mite_chan) == 0)
break;
- comedi_udelay(5);
+ udelay(5);
}
if (i == timeout) {
- rt_printk
+ printk
("ni_mio_common: wait for dma drain timed out\n");
- rt_printk
+ printk
("mite_bytes_in_transit=%i, AI_Status1_Register=0x%x\n",
mite_bytes_in_transit(devpriv->ai_mite_chan),
devpriv->stc_readw(dev, AI_Status_1_Register));
retval = -1;
}
}
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
ni_sync_ai_dma(dev);
retval = ni_request_ai_mite_channel(dev);
if (retval)
return retval;
-/* rt_printk("comedi_debug: using mite channel %i for ai.\n", devpriv->ai_mite_chan->channel); */
+/* printk("comedi_debug: using mite channel %i for ai.\n", devpriv->ai_mite_chan->channel); */
/* write alloc the entire buffer */
comedi_buf_write_alloc(s->async, s->async->prealloc_bufsz);
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
- if (devpriv->ai_mite_chan == NULL)
- {
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ if (devpriv->ai_mite_chan == NULL) {
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
return -EIO;
}
};
/*start the MITE */
mite_dma_arm(devpriv->ai_mite_chan);
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
return 0;
}
/* read alloc the entire buffer */
comedi_buf_read_alloc(s->async, s->async->prealloc_bufsz);
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
if (devpriv->ao_mite_chan) {
if (boardtype.reg_type & (ni_reg_611x | ni_reg_6713)) {
mite_prep_dma(devpriv->ao_mite_chan, 32, 32);
mite_dma_arm(devpriv->ao_mite_chan);
} else
retval = -EIO;
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
return retval;
}
/* lock to avoid race with interrupt handler */
if (in_interrupt() == 0)
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
#ifndef PCIDMA
ni_handle_fifo_dregs(dev);
#else
#endif
count = s->async->buf_write_count - s->async->buf_read_count;
if (in_interrupt() == 0)
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return count;
}
for (n = 0; n < num_adc_stages_611x; n++) {
devpriv->stc_writew(dev, AI_CONVERT_Pulse,
AI_Command_1_Register);
- comedi_udelay(1);
+ udelay(1);
}
for (n = 0; n < insn->n; n++) {
devpriv->stc_writew(dev, AI_CONVERT_Pulse,
}
}
if (i == NI_TIMEOUT) {
- rt_printk
+ printk
("ni_mio_common: timeout in 611x ni_ai_insn_read\n");
return -ETIME;
}
}
}
if (i == NI_TIMEOUT) {
- rt_printk
+ printk
("ni_mio_common: timeout in 6143 ni_ai_insn_read\n");
return -ETIME;
}
break;
}
if (i == NI_TIMEOUT) {
- rt_printk
+ printk
("ni_mio_common: timeout in ni_ai_insn_read\n");
return -ETIME;
}
devpriv->stc_writew(dev, 1, ADC_FIFO_Clear);
return;
}
- comedi_udelay(1);
+ udelay(1);
}
- rt_printk("ni_mio_common: timeout loading channel/gain list\n");
+ printk("ni_mio_common: timeout loading channel/gain list\n");
}
static void ni_m_series_load_channelgain_list(struct comedi_device *dev,
M_Offset_AO_Reference_Attenuation(chan));
break;
default:
- rt_printk("%s: bug! unhandled ao reference voltage\n",
+ printk("%s: bug! unhandled ao reference voltage\n",
__func__);
break;
}
conf |= MSeries_AO_DAC_Offset_5V_Bits;
break;
default:
- rt_printk("%s: bug! unhandled ao offset voltage\n",
+ printk("%s: bug! unhandled ao offset voltage\n",
__func__);
break;
}
devpriv->stc_writew(dev, devpriv->ao_mode3, AO_Mode_3_Register);
/* wait for DACs to be loaded */
for (i = 0; i < timeout; i++) {
- comedi_udelay(1);
+ udelay(1);
if ((devpriv->stc_readw(dev,
Joint_Status_2_Register) &
AO_TMRDACWRs_In_Progress_St) == 0)
struct comedi_insn *insn, unsigned int *data)
{
#ifdef DEBUG_DIO
- rt_printk("ni_dio_insn_config() chan=%d io=%d\n",
+ printk("ni_dio_insn_config() chan=%d io=%d\n",
CR_CHAN(insn->chanspec), data[0]);
#endif
switch (data[0]) {
struct comedi_insn *insn, unsigned int *data)
{
#ifdef DEBUG_DIO
- rt_printk("ni_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0], data[1]);
+ printk("ni_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0], data[1]);
#endif
if (insn->n != 2)
return -EINVAL;
struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data)
{
#ifdef DEBUG_DIO
- rt_printk("ni_m_series_dio_insn_config() chan=%d io=%d\n",
+ printk("ni_m_series_dio_insn_config() chan=%d io=%d\n",
CR_CHAN(insn->chanspec), data[0]);
#endif
switch (data[0]) {
struct comedi_insn *insn, unsigned int *data)
{
#ifdef DEBUG_DIO
- rt_printk("ni_m_series_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0],
+ printk("ni_m_series_dio_insn_bits() mask=0x%x bits=0x%x\n", data[0],
data[1]);
#endif
if (insn->n != 2)
comedi_buf_read_alloc(s->async, s->async->prealloc_bufsz);
#ifdef PCIDMA
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
if (devpriv->cdo_mite_chan) {
mite_prep_dma(devpriv->cdo_mite_chan, 32, 32);
mite_dma_arm(devpriv->cdo_mite_chan);
comedi_error(dev, "BUG: no cdo mite channel?");
retval = -EIO;
}
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
if (retval < 0)
return retval;
#endif
for (i = 0; i < timeout; ++i) {
if (ni_readl(M_Offset_CDIO_Status) & CDO_FIFO_Full_Bit)
break;
- comedi_udelay(10);
+ udelay(10);
}
if (i == timeout) {
comedi_error(dev, "dma failed to fill cdo fifo!");
return;
}
#ifdef PCIDMA
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
if (devpriv->cdo_mite_chan) {
unsigned cdo_mite_status =
mite_get_status(devpriv->cdo_mite_chan);
}
mite_sync_output_dma(devpriv->cdo_mite_chan, s->async);
}
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
#endif
cdio_status = ni_readl(M_Offset_CDIO_Status);
if (cdio_status & (CDO_Overrun_Bit | CDO_Underflow_Bit)) {
-/* rt_printk("cdio error: statux=0x%x\n", cdio_status); */
+/* printk("cdio error: statux=0x%x\n", cdio_status); */
ni_writel(CDO_Error_Interrupt_Confirm_Bit, M_Offset_CDIO_Command); /* XXX just guessing this is needed and does something useful */
s->async->events |= COMEDI_CB_OVERFLOW;
}
if (cdio_status & CDO_FIFO_Empty_Bit) {
-/* rt_printk("cdio fifo empty\n"); */
+/* printk("cdio fifo empty\n"); */
ni_writel(CDO_Empty_FIFO_Interrupt_Enable_Clear_Bit,
M_Offset_CDIO_Command);
/* s->async->events |= COMEDI_CB_EOA; */
case INSN_CONFIG_SERIAL_CLOCK:
#ifdef DEBUG_DIO
- rt_printk("SPI serial clock Config cd\n", data[1]);
+ printk("SPI serial clock Config cd\n", data[1]);
#endif
devpriv->serial_hw_mode = 1;
devpriv->dio_control |= DIO_HW_Serial_Enable;
err = ni_serial_sw_readwrite8(dev, s, byte_out,
&byte_in);
} else {
- rt_printk("ni_serial_insn_config: serial disabled!\n");
+ printk("ni_serial_insn_config: serial disabled!\n");
return -EINVAL;
}
if (err < 0)
int err = 0, count = 20;
#ifdef DEBUG_DIO
- rt_printk("ni_serial_hw_readwrite8: outputting 0x%x\n", data_out);
+ printk("ni_serial_hw_readwrite8: outputting 0x%x\n", data_out);
#endif
devpriv->dio_output &= ~DIO_Serial_Data_Mask;
Joint_Status_1_Register)) &
DIO_Serial_IO_In_Progress_St) {
/* Delay one bit per loop */
- comedi_udelay((devpriv->serial_interval_ns + 999) / 1000);
+ udelay((devpriv->serial_interval_ns + 999) / 1000);
if (--count < 0) {
- rt_printk
+ printk
("ni_serial_hw_readwrite8: SPI serial I/O didn't finish in time!\n");
err = -ETIME;
goto Error;
/* Delay for last bit. This delay is absolutely necessary, because
DIO_Serial_IO_In_Progress_St goes high one bit too early. */
- comedi_udelay((devpriv->serial_interval_ns + 999) / 1000);
+ udelay((devpriv->serial_interval_ns + 999) / 1000);
if (data_in != NULL) {
*data_in = devpriv->stc_readw(dev, DIO_Serial_Input_Register);
#ifdef DEBUG_DIO
- rt_printk("ni_serial_hw_readwrite8: inputted 0x%x\n", *data_in);
+ printk("ni_serial_hw_readwrite8: inputted 0x%x\n", *data_in);
#endif
}
unsigned char mask, input = 0;
#ifdef DEBUG_DIO
- rt_printk("ni_serial_sw_readwrite8: outputting 0x%x\n", data_out);
+ printk("ni_serial_sw_readwrite8: outputting 0x%x\n", data_out);
#endif
/* Wait for one bit before transfer */
- comedi_udelay((devpriv->serial_interval_ns + 999) / 1000);
+ udelay((devpriv->serial_interval_ns + 999) / 1000);
for (mask = 0x80; mask; mask >>= 1) {
/* Output current bit; note that we cannot touch s->state
devpriv->stc_writew(dev, devpriv->dio_control,
DIO_Control_Register);
- comedi_udelay((devpriv->serial_interval_ns + 999) / 2000);
+ udelay((devpriv->serial_interval_ns + 999) / 2000);
devpriv->dio_control &= ~DIO_Software_Serial_Control;
devpriv->stc_writew(dev, devpriv->dio_control,
DIO_Control_Register);
- comedi_udelay((devpriv->serial_interval_ns + 999) / 2000);
+ udelay((devpriv->serial_interval_ns + 999) / 2000);
/* Input current bit */
if (devpriv->stc_readw(dev,
DIO_Parallel_Input_Register) & DIO_SDIN) {
-/* rt_printk("DIO_P_I_R: 0x%x\n", devpriv->stc_readw(dev, DIO_Parallel_Input_Register)); */
+/* printk("DIO_P_I_R: 0x%x\n", devpriv->stc_readw(dev, DIO_Parallel_Input_Register)); */
input |= mask;
}
}
#ifdef DEBUG_DIO
- rt_printk("ni_serial_sw_readwrite8: inputted 0x%x\n", input);
+ printk("ni_serial_sw_readwrite8: inputted 0x%x\n", input);
#endif
if (data_in)
*data_in = input;
stc_register = Interrupt_B_Enable_Register;
break;
default:
- rt_printk("%s: unhandled register 0x%x in switch.\n",
+ printk("%s: unhandled register 0x%x in switch.\n",
__func__, reg);
BUG();
return 0;
for (bit = 1 << (bits - 1); bit; bit >>= 1) {
ni_writeb(((bit & bitstring) ? 0x02 : 0), Serial_Command);
- comedi_udelay(1);
+ udelay(1);
ni_writeb(1 | ((bit & bitstring) ? 0x02 : 0), Serial_Command);
- comedi_udelay(1);
+ udelay(1);
}
ni_writeb(loadbit, Serial_Command);
- comedi_udelay(1);
+ udelay(1);
ni_writeb(0, Serial_Command);
}
return NI_PFI_OUTPUT_G_GATE0;
break;
default:
- rt_printk("%s: bug, unhandled case in switch.\n", __func__);
+ printk("%s: bug, unhandled case in switch.\n", __func__);
break;
}
return 0;
/* Set clock mode to internal */
devpriv->clock_and_fout2 = MSeries_RTSI_10MHz_Bit;
if (ni_set_master_clock(dev, NI_MIO_INTERNAL_CLOCK, 0) < 0) {
- rt_printk("ni_set_master_clock failed, bug?");
+ printk("ni_set_master_clock failed, bug?");
}
/* default internal lines routing to RTSI bus lines */
devpriv->rtsi_trig_a_output_reg =
}
}
if (best_period_picosec == 0) {
- rt_printk("%s: bug, failed to find pll parameters\n",
+ printk("%s: bug, failed to find pll parameters\n",
__func__);
return -EIO;
}
period_ns = 100;
/* these limits are somewhat arbitrary, but NI advertises 1 to 20MHz range so we'll use that */
if (period_ns < min_period_ns || period_ns > max_period_ns) {
- rt_printk
+ printk
("%s: you must specify an input clock frequency between %i and %i nanosec "
"for the phased-lock loop.\n", __func__,
min_period_ns, max_period_ns);
MSeries_PLL_Divisor_Bits(freq_divider) |
MSeries_PLL_Multiplier_Bits(freq_multiplier);
- /* rt_printk("using divider=%i, multiplier=%i for PLL. pll_control_bits = 0x%x\n",
+ /* printk("using divider=%i, multiplier=%i for PLL. pll_control_bits = 0x%x\n",
* freq_divider, freq_multiplier, pll_control_bits); */
- /* rt_printk("clock_ns=%d\n", devpriv->clock_ns); */
+ /* printk("clock_ns=%d\n", devpriv->clock_ns); */
ni_writew(pll_control_bits, M_Offset_PLL_Control);
devpriv->clock_source = source;
/* it seems to typically take a few hundred microseconds for PLL to lock */
udelay(1);
}
if (i == timeout) {
- rt_printk
+ printk
("%s: timed out waiting for PLL to lock to reference clock source %i with period %i ns.\n",
__func__, source, period_ns);
return -ETIMEDOUT;
devpriv->rtsi_trig_direction_reg,
RTSI_Trig_Direction_Register);
if (period_ns == 0) {
- rt_printk
+ printk
("%s: we don't handle an unspecified clock period correctly yet, returning error.\n",
__func__);
return -EINVAL;
if (source == NI_RTSI_OUTPUT_RTSI_OSC)
return 1;
else {
- rt_printk
+ printk
("%s: invalid source for channel=%i, channel %i is always the RTSI clock for pre-m-series boards.\n",
__func__, chan,
old_RTSI_clock_channel);
} else {
if (chan == old_RTSI_clock_channel)
return NI_RTSI_OUTPUT_RTSI_OSC;
- rt_printk("%s: bug! should never get here?\n", __func__);
+ printk("%s: bug! should never get here?\n", __func__);
return 0;
}
}
}
/* printk("looped %i times waiting for idle\n", i); */
if (i == timeout) {
- rt_printk("%s: %s: timeout\n", __FILE__, __func__);
+ printk("%s: %s: timeout\n", __FILE__, __func__);
return -ETIME;
}
return 0;
for (i = 0; i < timeout; i++) {
if ((ni_ao_win_inw(dev, CAL_ADC_Status_67xx) & CSS_ADC_BUSY))
break;
- comedi_udelay(1);
+ udelay(1);
}
/* printk("looped %i times writing command to cs5529\n", i); */
if (i == timeout) {
}
status = ni_ao_win_inw(dev, CAL_ADC_Status_67xx);
if (status & CSS_OSC_DETECT) {
- rt_printk
+ printk
("ni_mio_common: cs5529 conversion error, status CSS_OSC_DETECT\n");
return -EIO;
}
if (status & CSS_OVERRANGE) {
- rt_printk
+ printk
("ni_mio_common: cs5529 conversion error, overrange (ignoring)\n");
}
if (data) {
comedi_error(dev, "timeout or signal in init_cs5529()\n");
#endif
#ifdef NI_CS5529_DEBUG
- rt_printk("config: 0x%x\n", cs5529_config_read(dev,
+ printk("config: 0x%x\n", cs5529_config_read(dev,
CSCMD_CONFIG_REGISTER));
- rt_printk("gain: 0x%x\n", cs5529_config_read(dev,
+ printk("gain: 0x%x\n", cs5529_config_read(dev,
CSCMD_GAIN_REGISTER));
- rt_printk("offset: 0x%x\n", cs5529_config_read(dev,
+ printk("offset: 0x%x\n", cs5529_config_read(dev,
CSCMD_OFFSET_REGISTER));
#endif
return 0;
{
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+ spin_lock_irqsave(&devpriv->window_lock, flags);
if (addr < 8) {
ni_writew(data, addr * 2);
} else {
ni_writew(addr, Window_Address);
ni_writew(data, Window_Data);
}
- comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+ spin_unlock_irqrestore(&devpriv->window_lock, flags);
}
static uint16_t mio_cs_win_in(struct comedi_device *dev, int addr)
unsigned long flags;
uint16_t ret;
- comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+ spin_lock_irqsave(&devpriv->window_lock, flags);
if (addr < 8) {
ret = ni_readw(addr * 2);
} else {
ni_writew(addr, Window_Address);
ret = ni_readw(Window_Data);
}
- comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+ spin_unlock_irqrestore(&devpriv->window_lock, flags);
return ret;
}
/* PCMCIA layer frees the IO region */
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
return 0;
printk(" %s", boardtype.name);
dev->board_name = boardtype.name;
- ret = comedi_request_irq(irq, ni_E_interrupt, NI_E_IRQ_FLAGS,
+ ret = request_irq(irq, ni_E_interrupt, NI_E_IRQ_FLAGS,
"ni_mio_cs", dev);
if (ret < 0) {
printk(" irq not available\n");
{
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
BUG_ON(devpriv->di_mite_chan);
devpriv->di_mite_chan =
mite_request_channel_in_range(devpriv->mite,
devpriv->di_mite_ring, 1, 2);
if (devpriv->di_mite_chan == NULL) {
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock,
- flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
comedi_error(dev, "failed to reserve mite dma channel.");
return -EBUSY;
}
secondary_DMAChannel_bits(devpriv->di_mite_chan->channel),
devpriv->mite->daq_io_addr + DMA_Line_Control_Group1);
mmiowb();
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
return 0;
}
{
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
if (devpriv->di_mite_chan) {
mite_dma_disarm(devpriv->di_mite_chan);
mite_dma_reset(devpriv->di_mite_chan);
devpriv->mite->daq_io_addr + DMA_Line_Control_Group1);
mmiowb();
}
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
}
static int nidio96_8255_cb(int dir, int port, int data, unsigned long iobase)
/* printk("buf[0]=%08x\n",*(unsigned int *)async->prealloc_buf); */
/* printk("buf[4096]=%08x\n",*(unsigned int *)(async->prealloc_buf+4096)); */
- comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, irq_flags);
+ spin_lock_irqsave(&devpriv->mite_channel_lock, irq_flags);
if (devpriv->di_mite_chan)
m_status = mite_get_status(devpriv->di_mite_chan);
#ifdef MITE_DEBUG
disable_irq(dev->irq);
}
}
- comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, irq_flags);
+ spin_unlock_irqrestore(&devpriv->mite_channel_lock, irq_flags);
while (status & DataLeft) {
work++;
devpriv->mite->daq_io_addr +
Master_DMA_And_Interrupt_Control);
- ret = comedi_request_irq(irq, nidio_interrupt, IRQF_SHARED,
- "ni_pcidio", dev);
+ ret = request_irq(irq, nidio_interrupt, IRQF_SHARED,
+ "ni_pcidio", dev);
if (ret < 0) {
printk(" irq not available");
}
}
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (devpriv) {
if (devpriv->di_mite_ring) {
need to slow down DAC loading. I don't trust NI's claim that
two writes to the PCI bus slows IO enough. I would prefer to
- use comedi_udelay(). Timing specs: (clock)
+ use udelay(). Timing specs: (clock)
AD8522 30ns
DAC8043 120ns
DAC8800 60ns
{
unsigned long flags;
- comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+ spin_lock_irqsave(&devpriv->window_lock, flags);
ni_writew(reg, Window_Address);
ni_writew(data, Window_Data);
- comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+ spin_unlock_irqrestore(&devpriv->window_lock, flags);
}
static uint16_t e_series_win_in(struct comedi_device *dev, int reg)
unsigned long flags;
uint16_t ret;
- comedi_spin_lock_irqsave(&devpriv->window_lock, flags);
+ spin_lock_irqsave(&devpriv->window_lock, flags);
ni_writew(reg, Window_Address);
ret = ni_readw(Window_Data);
- comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags);
+ spin_unlock_irqrestore(&devpriv->window_lock, flags);
return ret;
}
offset = M_Offset_AO_FIFO_Clear;
break;
case DIO_Control_Register:
- rt_printk
+ printk
("%s: FIXME: register 0x%x does not map cleanly on to m-series boards.\n",
__func__, reg);
return;
/* FIXME: DIO_Output_Register (16 bit reg) is replaced by M_Offset_Static_Digital_Output (32 bit)
and M_Offset_SCXI_Serial_Data_Out (8 bit) */
default:
- rt_printk("%s: bug! unhandled register=0x%x in switch.\n",
+ printk("%s: bug! unhandled register=0x%x in switch.\n",
__func__, reg);
BUG();
return;
offset = M_Offset_G01_Status;
break;
default:
- rt_printk("%s: bug! unhandled register=0x%x in switch.\n",
+ printk("%s: bug! unhandled register=0x%x in switch.\n",
__func__, reg);
BUG();
return 0;
offset = M_Offset_G1_Load_B;
break;
default:
- rt_printk("%s: bug! unhandled register=0x%x in switch.\n",
+ printk("%s: bug! unhandled register=0x%x in switch.\n",
__func__, reg);
BUG();
return;
offset = M_Offset_G1_Save;
break;
default:
- rt_printk("%s: bug! unhandled register=0x%x in switch.\n",
+ printk("%s: bug! unhandled register=0x%x in switch.\n",
__func__, reg);
BUG();
return 0;
{
mio_common_detach(dev);
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
if (dev->private) {
mite_free_ring(devpriv->ai_mite_ring);
printk(" unknown irq (bad)\n");
} else {
printk(" ( irq = %u )", dev->irq);
- ret = comedi_request_irq(dev->irq, ni_E_interrupt,
- NI_E_IRQ_FLAGS, DRV_NAME,
- dev);
+ ret = request_irq(dev->irq, ni_E_interrupt, NI_E_IRQ_FLAGS,
+ DRV_NAME, dev);
if (ret < 0) {
printk(" irq not available\n");
dev->irq = 0;
max_channel = 6;
}
if (channel > max_channel) {
- rt_printk("%s: bug, invalid RTSI_channel=%i\n", __func__,
+ printk("%s: bug, invalid RTSI_channel=%i\n", __func__,
channel);
return 0;
}
0x263,
};
if (((unsigned)i) >= ARRAY_SIZE(offset)) {
- rt_printk("%s: invalid channel=%i\n", __func__, i);
+ printk("%s: invalid channel=%i\n", __func__, i);
return offset[0];
}
return offset[i];
0x267
};
if (((unsigned)channel) >= ARRAY_SIZE(offset)) {
- rt_printk("%s: invalid channel=%i\n", __func__, channel);
+ printk("%s: invalid channel=%i\n", __func__, channel);
return offset[0];
}
return offset[channel];
static inline unsigned M_Offset_PFI_Output_Select(unsigned n)
{
if (n < 1 || n > NUM_PFI_OUTPUT_SELECT_REGS) {
- rt_printk("%s: invalid pfi output select register=%i\n",
+ printk("%s: invalid pfi output select register=%i\n",
__func__, n);
return M_Offset_PFI_Output_Select_1;
}
RTSI_channel)
{
if (RTSI_channel > 7) {
- rt_printk("%s: bug, invalid RTSI_channel=%i\n", __func__,
+ printk("%s: bug, invalid RTSI_channel=%i\n", __func__,
RTSI_channel);
return 0;
}
{
static const unsigned max_divisor = 0x10;
if (divisor < 1 || divisor > max_divisor) {
- rt_printk("%s: bug, invalid divisor=%i\n", __func__,
+ printk("%s: bug, invalid divisor=%i\n", __func__,
divisor);
return 0;
}
{
static const unsigned max_multiplier = 0x100;
if (multiplier < 1 || multiplier > max_multiplier) {
- rt_printk("%s: bug, invalid multiplier=%i\n", __func__,
+ printk("%s: bug, invalid multiplier=%i\n", __func__,
multiplier);
return 0;
}
}
if (i <= ni_m_series_max_pfi_channel)
break;
- rt_printk("invalid clock source 0x%lx\n",
+ printk("invalid clock source 0x%lx\n",
(unsigned long)clock_source);
BUG();
ni_m_series_clock = 0;
counter_dev->regs[abz_reg] &= ~mask;
counter_dev->regs[abz_reg] |= (source << shift) & mask;
write_register(counter, counter_dev->regs[abz_reg], abz_reg);
-/* rt_printk("%s %x %d %d\n", __func__, counter_dev->regs[abz_reg], index, source); */
+/* printk("%s %x %d %d\n", __func__, counter_dev->regs[abz_reg], index, source); */
return 0;
}
return -EINVAL;
unsigned long flags;
BUG_ON(register_index >= NITIO_Num_Registers);
- comedi_spin_lock_irqsave(&counter_dev->regs_lock, flags);
+ spin_lock_irqsave(&counter_dev->regs_lock, flags);
counter_dev->regs[register_index] &= ~bit_mask;
counter_dev->regs[register_index] |= (bit_values & bit_mask);
write_register(counter,
counter_dev->regs[register_index] | transient_bit_values,
register_index);
mmiowb();
- comedi_spin_unlock_irqrestore(&counter_dev->regs_lock, flags);
+ spin_unlock_irqrestore(&counter_dev->regs_lock, flags);
}
/* ni_tio_set_bits( ) is for safely writing to registers whose bits may be
unsigned value;
BUG_ON(register_index >= NITIO_Num_Registers);
- comedi_spin_lock_irqsave(&counter_dev->regs_lock, flags);
+ spin_lock_irqsave(&counter_dev->regs_lock, flags);
value = counter_dev->regs[register_index];
- comedi_spin_unlock_irqrestore(&counter_dev->regs_lock, flags);
+ spin_unlock_irqrestore(&counter_dev->regs_lock, flags);
return value;
}
if (trignum != 0)
return -EINVAL;
- comedi_spin_lock_irqsave(&counter->lock, flags);
+ spin_lock_irqsave(&counter->lock, flags);
if (counter->mite_chan)
mite_dma_arm(counter->mite_chan);
else
retval = -EIO;
- comedi_spin_unlock_irqrestore(&counter->lock, flags);
+ spin_unlock_irqrestore(&counter->lock, flags);
if (retval < 0)
return retval;
retval = ni_tio_arm(counter, 1, NI_GPCT_ARM_IMMEDIATE);
static int ni_tio_output_cmd(struct ni_gpct *counter, struct comedi_async *async)
{
- rt_printk("ni_tio: output commands not yet implemented.\n");
+ printk("ni_tio: output commands not yet implemented.\n");
return -ENOTSUPP;
counter->mite_chan->dir = COMEDI_OUTPUT;
int retval = 0;
unsigned long flags;
- comedi_spin_lock_irqsave(&counter->lock, flags);
+ spin_lock_irqsave(&counter->lock, flags);
if (counter->mite_chan == NULL) {
- rt_printk
+ printk
("ni_tio: commands only supported with DMA. Interrupt-driven commands not yet implemented.\n");
retval = -EIO;
} else {
}
}
}
- comedi_spin_unlock_irqrestore(&counter->lock, flags);
+ spin_unlock_irqrestore(&counter->lock, flags);
return retval;
}
unsigned long flags;
ni_tio_arm(counter, 0, 0);
- comedi_spin_lock_irqsave(&counter->lock, flags);
+ spin_lock_irqsave(&counter->lock, flags);
if (counter->mite_chan) {
mite_dma_disarm(counter->mite_chan);
}
- comedi_spin_unlock_irqrestore(&counter->lock, flags);
+ spin_unlock_irqrestore(&counter->lock, flags);
ni_tio_configure_dma(counter, 0, 0);
ni_tio_set_bits(counter,
return 1;
break;
case ni_gpct_variant_e_series:
- comedi_spin_lock_irqsave(&counter->lock, flags);
+ spin_lock_irqsave(&counter->lock, flags);
{
if (counter->mite_chan == NULL ||
counter->mite_chan->dir != COMEDI_INPUT ||
retval = 1;
}
}
- comedi_spin_unlock_irqrestore(&counter->lock, flags);
+ spin_unlock_irqrestore(&counter->lock, flags);
break;
}
return retval;
NITIO_Gxx_Joint_Status2_Reg(counter->
counter_index)) &
Gi_Permanent_Stale_Bit(counter->counter_index)) {
- rt_printk("%s: Gi_Permanent_Stale_Data detected.\n",
+ printk("%s: Gi_Permanent_Stale_Data detected.\n",
__FUNCTION__);
if (perm_stale_data)
*perm_stale_data = 1;
ni_tio_acknowledge_and_confirm(counter, &gate_error, &tc_error,
&perm_stale_data, NULL);
if (gate_error) {
- rt_printk("%s: Gi_Gate_Error detected.\n", __FUNCTION__);
+ printk("%s: Gi_Gate_Error detected.\n", __FUNCTION__);
s->async->events |= COMEDI_CB_OVERFLOW;
}
if (perm_stale_data) {
if (read_register(counter,
NITIO_Gi_DMA_Status_Reg(counter->
counter_index)) & Gi_DRQ_Error_Bit) {
- rt_printk("%s: Gi_DRQ_Error detected.\n", __FUNCTION__);
+ printk("%s: Gi_DRQ_Error detected.\n", __FUNCTION__);
s->async->events |= COMEDI_CB_OVERFLOW;
}
break;
case ni_gpct_variant_e_series:
break;
}
- comedi_spin_lock_irqsave(&counter->lock, flags);
+ spin_lock_irqsave(&counter->lock, flags);
if (counter->mite_chan == NULL) {
- comedi_spin_unlock_irqrestore(&counter->lock, flags);
+ spin_unlock_irqrestore(&counter->lock, flags);
return;
}
gpct_mite_status = mite_get_status(counter->mite_chan);
MITE_CHOR(counter->mite_chan->channel));
}
mite_sync_input_dma(counter->mite_chan, s->async);
- comedi_spin_unlock_irqrestore(&counter->lock, flags);
+ spin_unlock_irqrestore(&counter->lock, flags);
}
void ni_tio_set_mite_channel(struct ni_gpct *counter,
{
unsigned long flags;
- comedi_spin_lock_irqsave(&counter->lock, flags);
+ spin_lock_irqsave(&counter->lock, flags);
counter->mite_chan = mite_chan;
- comedi_spin_unlock_irqrestore(&counter->lock, flags);
+ spin_unlock_irqrestore(&counter->lock, flags);
}
static int __init ni_tiocmd_init_module(void)
hi = inb(dev->iobase + PCL711_AD_HI);
if (!(hi & PCL711_DRDY))
goto ok;
- comedi_udelay(1);
+ udelay(1);
}
- rt_printk("comedi%d: pcl711: A/D timeout\n", dev->minor);
+ printk("comedi%d: pcl711: A/D timeout\n", dev->minor);
return -ETIME;
ok:
printk("comedi%d: pcl711: remove\n", dev->minor);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (dev->iobase)
release_region(dev->iobase, PCL711_SIZE);
return -EINVAL;
}
if (irq) {
- if (comedi_request_irq(irq, pcl711_interrupt, 0, "pcl711", dev)) {
+ if (request_irq(irq, pcl711_interrupt, 0, "pcl711", dev)) {
printk("unable to allocate irq %u\n", irq);
return -EINVAL;
} else {
irq = it->options[1];
if (irq) { /* we want to use IRQ */
if (((1 << irq) & this_board->IRQbits) == 0) {
- rt_printk
+ printk
(", IRQ %u is out of allowed range, DISABLING IT",
irq);
irq = 0; /* Bad IRQ */
} else {
- if (comedi_request_irq(irq, interrupt_pcl724, 0,
- "pcl724", dev)) {
- rt_printk
+ if (request_irq(irq, interrupt_pcl724, 0, "pcl724", dev)) {
+ printk
(", unable to allocate IRQ %u, DISABLING IT",
irq);
irq = 0; /* Can't use IRQ */
} else {
- rt_printk(", irq=%u", irq);
+ printk(", irq=%u", irq);
}
}
}
#ifdef PCL724_IRQ
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
#endif
devpriv->first_chan = 2;
if (irq) { /* we want to use IRQ */
if (((1 << irq) & boardtypes[board].IRQbits) == 0) {
- rt_printk
+ printk
(", IRQ %d is out of allowed range, DISABLING IT",
irq);
irq = 0; /* Bad IRQ */
} else {
- if (comedi_request_irq(irq, interrupt_pcl818, 0,
+ if (request_irq(irq, interrupt_pcl818, 0,
"pcl726", dev)) {
- rt_printk
+ printk
(", unable to allocate IRQ %d, DISABLING IT",
irq);
irq = 0; /* Can't use IRQ */
} else {
- rt_printk(", irq=%d", irq);
+ printk(", irq=%d", irq);
}
}
}
#ifdef ACL6126_IRQ
if (dev->irq) {
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
#endif
setup_range_channel(dev, s, insn->chanspec, 1); /* select channel and renge */
for (n = 0; n < insn->n; n++) {
outb(255, dev->iobase + PCL812_SOFTTRIG); /* start conversion */
- comedi_udelay(5);
+ udelay(5);
timeout = 50; /* wait max 50us, it must finish under 33us */
while (timeout--) {
hi = inb(dev->iobase + PCL812_AD_HI);
if (!(hi & PCL812_DRDY))
goto conv_finish;
- comedi_udelay(1);
+ udelay(1);
}
- rt_printk
+ printk
("comedi%d: pcl812: (%s at 0x%lx) A/D insn read timeout\n",
dev->minor, dev->board_name, dev->iobase);
outb(devpriv->mode_reg_int | 0, dev->iobase + PCL812_MODE);
setup_range_channel(dev, s, insn->chanspec, 1); /* select channel and renge */
for (n = 0; n < insn->n; n++) {
outb(255, dev->iobase + PCL812_SOFTTRIG); /* start conversion */
- comedi_udelay(5);
+ udelay(5);
timeout = 50; /* wait max 50us, it must finish under 33us */
while (timeout--) {
if (!(inb(dev->iobase + ACL8216_STATUS) & ACL8216_DRDY))
goto conv_finish;
- comedi_udelay(1);
+ udelay(1);
}
- rt_printk
+ printk
("comedi%d: pcl812: (%s at 0x%lx) A/D insn read timeout\n",
dev->minor, dev->board_name, dev->iobase);
outb(0, dev->iobase + PCL812_MODE);
*/
static void pcl812_cmdtest_out(int e, struct comedi_cmd *cmd)
{
- rt_printk("pcl812 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
+ printk("pcl812 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
cmd->start_src, cmd->scan_begin_src, cmd->convert_src);
- rt_printk("pcl812 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
+ printk("pcl812 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg);
- rt_printk("pcl812 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
+ printk("pcl812 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
cmd->scan_end_src);
- rt_printk("pcl812 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
+ printk("pcl812 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
}
#endif
int tmp, divisor1, divisor2;
#ifdef PCL812_EXTDEBUG
- rt_printk("pcl812 EDBG: BGN: pcl812_ai_cmdtest(...)\n");
+ printk("pcl812 EDBG: BGN: pcl812_ai_cmdtest(...)\n");
pcl812_cmdtest_out(-1, cmd);
#endif
/* step 1: make sure trigger sources are trivially valid */
if (err) {
#ifdef PCL812_EXTDEBUG
pcl812_cmdtest_out(1, cmd);
- rt_printk
+ printk
("pcl812 EDBG: BGN: pcl812_ai_cmdtest(...) err=%d ret=1\n",
err);
#endif
if (err) {
#ifdef PCL812_EXTDEBUG
pcl812_cmdtest_out(2, cmd);
- rt_printk
+ printk
("pcl812 EDBG: BGN: pcl812_ai_cmdtest(...) err=%d ret=2\n",
err);
#endif
if (err) {
#ifdef PCL812_EXTDEBUG
pcl812_cmdtest_out(3, cmd);
- rt_printk
+ printk
("pcl812 EDBG: BGN: pcl812_ai_cmdtest(...) err=%d ret=3\n",
err);
#endif
if (err) {
#ifdef PCL812_EXTDEBUG
- rt_printk
+ printk
("pcl812 EDBG: BGN: pcl812_ai_cmdtest(...) err=%d ret=4\n",
err);
#endif
struct comedi_cmd *cmd = &s->async->cmd;
#ifdef PCL812_EXTDEBUG
- rt_printk("pcl812 EDBG: BGN: pcl812_ai_cmd(...)\n");
+ printk("pcl812 EDBG: BGN: pcl812_ai_cmd(...)\n");
#endif
if (cmd->start_src != TRIG_NOW)
release_dma_lock(dma_flags);
enable_dma(devpriv->dma);
#ifdef PCL812_EXTDEBUG
- rt_printk
+ printk
("pcl812 EDBG: DMA %d PTR 0x%0x/0x%0x LEN %u/%u EOS %d\n",
devpriv->dma, devpriv->hwdmaptr[0],
devpriv->hwdmaptr[1], devpriv->dmabytestomove[0],
}
#ifdef PCL812_EXTDEBUG
- rt_printk("pcl812 EDBG: END: pcl812_ai_cmd(...)\n");
+ printk("pcl812 EDBG: END: pcl812_ai_cmd(...)\n");
#endif
return 0;
err = 0;
break;
}
- comedi_udelay(1);
+ udelay(1);
}
} else {
mask = 0x0fff;
err = 0;
break;
}
- comedi_udelay(1);
+ udelay(1);
}
}
if (err) {
- rt_printk
+ printk
("comedi%d: pcl812: (%s at 0x%lx) A/D cmd IRQ without DRDY!\n",
dev->minor, dev->board_name, dev->iobase);
pcl812_ai_cancel(dev, s);
short *ptr;
#ifdef PCL812_EXTDEBUG
- rt_printk("pcl812 EDBG: BGN: interrupt_pcl812_ai_dma(...)\n");
+ printk("pcl812 EDBG: BGN: interrupt_pcl812_ai_dma(...)\n");
#endif
ptr = (short *) devpriv->dmabuf[devpriv->next_dma_buf];
len = (devpriv->dmabytestomove[devpriv->next_dma_buf] >> 1) -
transfer_from_dma_buf(dev, s, ptr, bufptr, len);
#ifdef PCL812_EXTDEBUG
- rt_printk("pcl812 EDBG: END: interrupt_pcl812_ai_dma(...)\n");
+ printk("pcl812 EDBG: END: interrupt_pcl812_ai_dma(...)\n");
#endif
return IRQ_HANDLED;
}
if (!devpriv->ai_dma)
return 0; /* poll is valid only for DMA transfer */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
for (i = 0; i < 10; i++) {
top1 = get_dma_residue(devpriv->ai_dma); /* where is now DMA */
}
if (top1 != top2) {
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return 0;
}
top1 >>= 1; /* sample position */
top2 = top1 - devpriv->ai_poll_ptr;
if (top2 < 1) { /* no new samples */
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return 0;
}
devpriv->ai_poll_ptr = top1; /* new buffer position */
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return s->async->buf_write_count - s->async->buf_read_count;
}
outb(gain_reg, dev->iobase + PCL812_GAIN); /* select gain */
if (wait) {
- comedi_udelay(devpriv->max_812_ai_mode0_rangewait); /* XXX this depends on selected range and can be very long for some high gain ranges! */
+ udelay(devpriv->max_812_ai_mode0_rangewait); /* XXX this depends on selected range and can be very long for some high gain ranges! */
}
}
unsigned int divisor2)
{
#ifdef PCL812_EXTDEBUG
- rt_printk("pcl812 EDBG: BGN: start_pacer(%d,%u,%u)\n", mode, divisor1,
+ printk("pcl812 EDBG: BGN: start_pacer(%d,%u,%u)\n", mode, divisor1,
divisor2);
#endif
outb(0xb4, dev->iobase + PCL812_CTRCTL);
outb(0x74, dev->iobase + PCL812_CTRCTL);
- comedi_udelay(1);
+ udelay(1);
if (mode == 1) {
outb(divisor2 & 0xff, dev->iobase + PCL812_CTR2);
outb((divisor1 >> 8) & 0xff, dev->iobase + PCL812_CTR1);
}
#ifdef PCL812_EXTDEBUG
- rt_printk("pcl812 EDBG: END: start_pacer(...)\n");
+ printk("pcl812 EDBG: END: start_pacer(...)\n");
#endif
}
free_dma(devpriv->dma);
}
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (dev->iobase)
release_region(dev->iobase, this_board->io_range);
}
static int pcl812_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
#ifdef PCL812_EXTDEBUG
- rt_printk("pcl812 EDBG: BGN: pcl812_ai_cancel(...)\n");
+ printk("pcl812 EDBG: BGN: pcl812_ai_cancel(...)\n");
#endif
if (devpriv->ai_dma)
disable_dma(devpriv->dma);
start_pacer(dev, -1, 0, 0); /* stop 8254 */
outb(0, dev->iobase + PCL812_CLRINT); /* clear INT request */
#ifdef PCL812_EXTDEBUG
- rt_printk("pcl812 EDBG: END: pcl812_ai_cancel(...)\n");
+ printk("pcl812 EDBG: END: pcl812_ai_cancel(...)\n");
#endif
return 0;
}
static void pcl812_reset(struct comedi_device *dev)
{
#ifdef PCL812_EXTDEBUG
- rt_printk("pcl812 EDBG: BGN: pcl812_reset(...)\n");
+ printk("pcl812 EDBG: BGN: pcl812_reset(...)\n");
#endif
outb(0, dev->iobase + PCL812_MUX);
outb(0 + devpriv->range_correction, dev->iobase + PCL812_GAIN);
case boardPCL813:
case boardISO813:
case boardACL8113:
- comedi_udelay(5);
+ udelay(5);
break;
}
- comedi_udelay(5);
+ udelay(5);
#ifdef PCL812_EXTDEBUG
- rt_printk("pcl812 EDBG: END: pcl812_reset(...)\n");
+ printk("pcl812 EDBG: END: pcl812_reset(...)\n");
#endif
}
printk(", IRQ %u is out of allowed range, DISABLING IT", irq);
irq = 0; /* Bad IRQ */
} else {
- if (comedi_request_irq(irq, interrupt_pcl812, 0,
- "pcl812", dev)) {
+ if (request_irq(irq, interrupt_pcl812, 0, "pcl812", dev)) {
printk(", unable to allocate IRQ %u, DISABLING IT", irq);
irq = 0; /* Can't use IRQ */
} else {
{
#ifdef PCL812_EXTDEBUG
- rt_printk("comedi%d: pcl812: remove\n", dev->minor);
+ printk("comedi%d: pcl812: remove\n", dev->minor);
#endif
free_resources(dev);
return 0;
outb(0, dev->iobase + PCL816_CLRINT); /* clear INT (conversion end) flag */
break;
}
- comedi_udelay(1);
+ udelay(1);
}
/* Return timeout error */
if (!timeout) {
if (!(inb(dev->iobase + PCL816_STATUS) &
PCL816_STATUS_DRDY_MASK))
break;
- comedi_udelay(1);
+ udelay(1);
}
if (!timeout) { /* timeout, bail error */
outb(0, dev->iobase + PCL816_CLRINT); /* clear INT request */
*/
static void pcl816_cmdtest_out(int e, struct comedi_cmd *cmd)
{
- rt_printk("pcl816 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
+ printk("pcl816 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
cmd->start_src, cmd->scan_begin_src, cmd->convert_src);
- rt_printk("pcl816 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
+ printk("pcl816 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg);
- rt_printk("pcl816 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
+ printk("pcl816 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
cmd->scan_end_src);
- rt_printk("pcl816 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
+ printk("pcl816 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
}
int err = 0;
int tmp, divisor1, divisor2;
- DEBUG(rt_printk("pcl816 pcl812_ai_cmdtest\n");
+ DEBUG(printk("pcl816 pcl812_ai_cmdtest\n");
pcl816_cmdtest_out(-1, cmd););
/* step 1: make sure trigger sources are trivially valid */
if (!check_and_setup_channel_list(dev, s, cmd->chanlist,
cmd->chanlist_len))
return -EINVAL;
- comedi_udelay(1);
+ udelay(1);
devpriv->ai_act_scan = 0;
s->async->cur_chan = 0;
if (!devpriv->dma)
return 0; /* poll is valid only for DMA transfer */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
for (i = 0; i < 20; i++) {
top1 = get_dma_residue(devpriv->dma); /* where is now DMA */
break;
}
if (top1 != top2) {
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return 0;
}
top1 >>= 1; /* sample position */
top2 = top1 - devpriv->ai_poll_ptr;
if (top2 < 1) { /* no new samples */
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return 0;
}
devpriv->ai_poll_ptr, top2);
devpriv->ai_poll_ptr = top1; /* new buffer position */
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return s->async->buf_write_count - s->async->buf_read_count;
}
*/
static int pcl816_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
-/* DEBUG(rt_printk("pcl816_ai_cancel()\n");) */
+/* DEBUG(printk("pcl816_ai_cancel()\n");) */
if (devpriv->irq_blocked > 0) {
switch (devpriv->int816_mode) {
case INT_TYPE_AI1_INT:
case INT_TYPE_AI3_INT:
outb(inb(dev->iobase + PCL816_CONTROL) & 0x73, dev->iobase + PCL816_CONTROL); /* Stop A/D */
- comedi_udelay(1);
+ udelay(1);
outb(0, dev->iobase + PCL816_CONTROL); /* Stop A/D */
outb(0xb0, dev->iobase + PCL816_CTRCTL); /* Stop pacer */
outb(0x70, dev->iobase + PCL816_CTRCTL);
}
}
- DEBUG(rt_printk("comedi: pcl816_ai_cancel() successful\n");
+ DEBUG(printk("comedi: pcl816_ai_cancel() successful\n");
)
return 0;
}
static int pcl816_check(unsigned long iobase)
{
outb(0x00, iobase + PCL816_MUX);
- comedi_udelay(1);
+ udelay(1);
if (inb(iobase + PCL816_MUX) != 0x00)
return 1; /* there isn't card */
outb(0x55, iobase + PCL816_MUX);
- comedi_udelay(1);
+ udelay(1);
if (inb(iobase + PCL816_MUX) != 0x55)
return 1; /* there isn't card */
outb(0x00, iobase + PCL816_MUX);
- comedi_udelay(1);
+ udelay(1);
outb(0x18, iobase + PCL816_CONTROL);
- comedi_udelay(1);
+ udelay(1);
if (inb(iobase + PCL816_CONTROL) != 0x18)
return 1; /* there isn't card */
return 0; /* ok, card exist */
{
/* outb (0, dev->iobase + PCL818_DA_LO); DAC=0V */
/* outb (0, dev->iobase + PCL818_DA_HI); */
-/* comedi_udelay (1); */
+/* udelay (1); */
/* outb (0, dev->iobase + PCL818_DO_HI); DO=$0000 */
/* outb (0, dev->iobase + PCL818_DO_LO); */
-/* comedi_udelay (1); */
+/* udelay (1); */
outb(0, dev->iobase + PCL816_CONTROL);
outb(0, dev->iobase + PCL816_MUX);
outb(0, dev->iobase + PCL816_CLRINT);
outb(0x32, dev->iobase + PCL816_CTRCTL);
outb(0xff, dev->iobase + PCL816_CTR0);
outb(0x00, dev->iobase + PCL816_CTR0);
- comedi_udelay(1);
+ udelay(1);
outb(0xb4, dev->iobase + PCL816_CTRCTL); /* set counter 2 as mode 3 */
outb(0x74, dev->iobase + PCL816_CTRCTL); /* set counter 1 as mode 3 */
- comedi_udelay(1);
+ udelay(1);
if (mode == 1) {
DPRINTK("mode %d, divisor1 %d, divisor2 %d\n", mode, divisor1,
chansegment[0] = chanlist[0]; /* first channel is everytime ok */
for (i = 1, seglen = 1; i < chanlen; i++, seglen++) {
/* build part of chanlist */
- DEBUG(rt_printk("%d. %d %d\n", i, CR_CHAN(chanlist[i]),
+ DEBUG(printk("%d. %d %d\n", i, CR_CHAN(chanlist[i]),
CR_RANGE(chanlist[i]));
)
if (chanlist[0] == chanlist[i])
(CR_CHAN(chansegment[i - 1]) + 1) % chanlen;
if (nowmustbechan != CR_CHAN(chanlist[i])) {
/* channel list isn't continous :-( */
- rt_printk
+ printk
("comedi%d: pcl816: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
dev->minor, i, CR_CHAN(chanlist[i]),
nowmustbechan, CR_CHAN(chanlist[0]));
}
for (i = 0, segpos = 0; i < chanlen; i++) { /* check whole chanlist */
- DEBUG(rt_printk("%d %d=%d %d\n",
+ DEBUG(printk("%d %d=%d %d\n",
CR_CHAN(chansegment[i % seglen]),
CR_RANGE(chansegment[i % seglen]),
CR_CHAN(chanlist[i]),
CR_RANGE(chanlist[i]));
)
if (chanlist[i] != chansegment[i % seglen]) {
- rt_printk
+ printk
("comedi%d: pcl816: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
dev->minor, i, CR_CHAN(chansegment[i]),
CR_RANGE(chansegment[i]),
outb(CR_RANGE(chanlist[0]), dev->iobase + PCL816_RANGE); /* select gain */
}
- comedi_udelay(1);
+ udelay(1);
outb(devpriv->ai_act_chanlist[0] | (devpriv->ai_act_chanlist[seglen - 1] << 4), dev->iobase + PCL816_MUX); /* select channel interval to scan */
*/
static void free_resources(struct comedi_device *dev)
{
- /* rt_printk("free_resource()\n"); */
+ /* printk("free_resource()\n"); */
if (dev->private) {
pcl816_ai_cancel(dev, devpriv->sub_ai);
pcl816_reset(dev);
free_pages(devpriv->dmabuf[1], devpriv->dmapages[1]);
#ifdef unused
if (devpriv->rtc_irq)
- comedi_free_irq(devpriv->rtc_irq, dev);
+ free_irq(devpriv->rtc_irq, dev);
if ((devpriv->dma_rtc) && (RTC_lock == 1)) {
if (devpriv->rtc_iobase)
release_region(devpriv->rtc_iobase,
free_irq(dev->irq, dev);
if (dev->iobase)
release_region(dev->iobase, this_board->io_range);
- /* rt_printk("free_resource() end\n"); */
+ /* printk("free_resource() end\n"); */
}
/*
this_board->name, iobase);
if (!request_region(iobase, this_board->io_range, "pcl816")) {
- rt_printk("I/O port conflict\n");
+ printk("I/O port conflict\n");
return -EIO;
}
dev->iobase = iobase;
if (pcl816_check(iobase)) {
- rt_printk(", I cann't detect board. FAIL!\n");
+ printk(", I cann't detect board. FAIL!\n");
return -EIO;
}
irq = it->options[1];
if (irq) { /* we want to use IRQ */
if (((1 << irq) & this_board->IRQbits) == 0) {
- rt_printk
+ printk
(", IRQ %u is out of allowed range, DISABLING IT",
irq);
irq = 0; /* Bad IRQ */
} else {
- if (comedi_request_irq(irq, interrupt_pcl816, 0,
- "pcl816", dev)) {
- rt_printk
+ if (request_irq(irq, interrupt_pcl816, 0, "pcl816", dev)) {
+ printk
(", unable to allocate IRQ %u, DISABLING IT",
irq);
irq = 0; /* Can't use IRQ */
} else {
- rt_printk(", irq=%u", irq);
+ printk(", irq=%u", irq);
}
}
}
devpriv->rtc_iosize = RTC_IO_EXTENT;
RTC_lock++;
#ifdef UNTESTED_CODE
- if (!comedi_request_irq(RTC_IRQ,
- interrupt_pcl816_ai_mode13_dma_rtc, 0,
+ if (!request_irq(RTC_IRQ, interrupt_pcl816_ai_mode13_dma_rtc, 0,
"pcl816 DMA (RTC)", dev)) {
devpriv->dma_rtc = 1;
devpriv->rtc_irq = RTC_IRQ;
- rt_printk(", dma_irq=%u", devpriv->rtc_irq);
+ printk(", dma_irq=%u", devpriv->rtc_irq);
} else {
RTC_lock--;
if (RTC_lock == 0) {
goto no_dma; /* DMA disabled */
if (((1 << dma) & this_board->DMAbits) == 0) {
- rt_printk(", DMA is out of allowed range, FAIL!\n");
+ printk(", DMA is out of allowed range, FAIL!\n");
return -EINVAL; /* Bad DMA */
}
ret = request_dma(dma, "pcl816");
if (ret) {
- rt_printk(", unable to allocate DMA %u, FAIL!\n", dma);
+ printk(", unable to allocate DMA %u, FAIL!\n", dma);
return -EBUSY; /* DMA isn't free */
}
devpriv->dma = dma;
- rt_printk(", dma=%u", dma);
+ printk(", dma=%u", dma);
pages = 2; /* we need 16KB */
devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
if (!devpriv->dmabuf[0]) {
- rt_printk(", unable to allocate DMA buffer, FAIL!\n");
+ printk(", unable to allocate DMA buffer, FAIL!\n");
/* maybe experiment with try_to_free_pages() will help .... */
return -EBUSY; /* no buffer :-( */
}
devpriv->dmapages[0] = pages;
devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]);
devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE;
- /* rt_printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */
+ /* printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */
if (devpriv->dma_rtc == 0) { /* we must do duble buff :-( */
devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
if (!devpriv->dmabuf[1]) {
- rt_printk
+ printk
(", unable to allocate DMA buffer, FAIL!\n");
return -EBUSY;
}
pcl816_reset(dev);
- rt_printk("\n");
+ printk("\n");
return 0;
}
*/
static int pcl816_detach(struct comedi_device *dev)
{
- DEBUG(rt_printk("comedi%d: pcl816: remove\n", dev->minor);
+ DEBUG(printk("comedi%d: pcl816: remove\n", dev->minor);
)
free_resources(dev);
#ifdef unused
while (timeout--) {
if (inb(dev->iobase + PCL818_STATUS) & 0x10)
goto conv_finish;
- comedi_udelay(1);
+ udelay(1);
}
comedi_error(dev, "A/D insn timeout");
/* clear INT (conversion end) flag */
while (timeout--) {
if (inb(dev->iobase + PCL818_STATUS) & 0x10)
goto conv_finish;
- comedi_udelay(1);
+ udelay(1);
}
outb(0, dev->iobase + PCL818_STATUS); /* clear INT request */
comedi_error(dev, "A/D mode1/3 IRQ without DRDY!");
outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
- rt_printk
+ printk
("comedi: A/D mode1/3 IRQ - channel dropout %x!=%x !\n",
(low & 0xf),
devpriv->act_chanlist[devpriv->act_chanlist_pos]);
return IRQ_HANDLED;
}
if (s->async->cur_chan == 0) {
- /* rt_printk("E"); */
+ /* printk("E"); */
devpriv->ai_act_scan--;
}
release_dma_lock(flags);
enable_dma(devpriv->dma);
}
- rt_printk("comedi: A/D mode1/3 IRQ \n");
+ printk("comedi: A/D mode1/3 IRQ \n");
devpriv->dma_runs_to_end--;
outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
for (i = 0; i < len; i++) {
if ((ptr[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
- rt_printk
+ printk
("comedi: A/D mode1/3 DMA - channel dropout %d(card)!=%d(chanlist) at %d !\n",
(ptr[bufptr] & 0xf),
devpriv->act_chanlist[devpriv->
if (dmabuf[i] != MAGIC_DMA_WORD) { /* DMA overflow! */
comedi_error(dev, "A/D mode1/3 DMA buffer overflow!");
- /* rt_printk("I %d dmabuf[i] %d %d\n",i,dmabuf[i],devpriv->dmasamplsize); */
+ /* printk("I %d dmabuf[i] %d %d\n",i,dmabuf[i],devpriv->dmasamplsize); */
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
return IRQ_HANDLED;
}
- /* rt_printk("r %ld ",ofs_dats); */
+ /* printk("r %ld ",ofs_dats); */
bufptr = devpriv->last_top_dma;
for (i = 0; i < ofs_dats; i++) {
if ((dmabuf[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
- rt_printk
+ printk
("comedi: A/D mode1/3 DMA - channel dropout %d!=%d !\n",
(dmabuf[bufptr] & 0xf),
devpriv->act_chanlist[devpriv->
for (i = 0; i < len; i++) {
lo = inb(dev->iobase + PCL818_FI_DATALO);
if ((lo & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
- rt_printk
+ printk
("comedi: A/D mode1/3 FIFO - channel dropout %d!=%d !\n",
(lo & 0xf),
devpriv->act_chanlist[devpriv->
comedi_error(dev, "premature interrupt");
return IRQ_HANDLED;
}
- /* rt_printk("I\n"); */
+ /* printk("I\n"); */
if (devpriv->irq_blocked && devpriv->irq_was_now_closed) {
if ((devpriv->neverending_ai || (!devpriv->neverending_ai &&
unsigned int flags;
unsigned int bytes;
- rt_printk("mode13dma_int, mode: %d\n", mode);
+ printk("mode13dma_int, mode: %d\n", mode);
disable_dma(devpriv->dma); /* disable dma */
bytes = devpriv->hwdmasize[0];
if (!devpriv->neverending_ai) {
int divisor1, divisor2;
unsigned int seglen;
- rt_printk("pcl818_ai_cmd_mode()\n");
+ printk("pcl818_ai_cmd_mode()\n");
if ((!dev->irq) && (!devpriv->dma_rtc)) {
comedi_error(dev, "IRQ not defined!");
return -EINVAL;
setup_channel_list(dev, s, devpriv->ai_chanlist,
devpriv->ai_n_chan, seglen);
- comedi_udelay(1);
+ udelay(1);
devpriv->ai_act_scan = devpriv->ai_scans;
devpriv->ai_act_chan = 0;
case 0:
if (!devpriv->usefifo) {
/* IRQ */
- /* rt_printk("IRQ\n"); */
+ /* printk("IRQ\n"); */
if (mode == 1) {
devpriv->ai_mode = INT_TYPE_AI1_INT;
/* Pacer+IRQ */
break;
}
#endif
- rt_printk("pcl818_ai_cmd_mode() end\n");
+ printk("pcl818_ai_cmd_mode() end\n");
return 0;
}
{
outb(0xb4, dev->iobase + PCL818_CTRCTL);
outb(0x74, dev->iobase + PCL818_CTRCTL);
- comedi_udelay(1);
+ udelay(1);
if (mode == 1) {
outb(divisor2 & 0xff, dev->iobase + PCL818_CTR2);
/* build part of chanlist */
for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {
- /* rt_printk("%d. %d * %d\n",i,
+ /* printk("%d. %d * %d\n",i,
* CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i]));*/
/* we detect loop, this must by finish */
nowmustbechan =
(CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
if (nowmustbechan != CR_CHAN(chanlist[i])) { /* channel list isn't continous :-( */
- rt_printk
+ printk
("comedi%d: pcl818: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
dev->minor, i, CR_CHAN(chanlist[i]),
nowmustbechan, CR_CHAN(chanlist[0]));
/* check whole chanlist */
for (i = 0, segpos = 0; i < n_chan; i++) {
- /* rt_printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i])); */
+ /* printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i])); */
if (chanlist[i] != chansegment[i % seglen]) {
- rt_printk
+ printk
("comedi%d: pcl818: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
dev->minor, i, CR_CHAN(chansegment[i]),
CR_RANGE(chansegment[i]),
} else {
seglen = 1;
}
- rt_printk("check_channel_list: seglen %d\n", seglen);
+ printk("check_channel_list: seglen %d\n", seglen);
return seglen;
}
outb(CR_RANGE(chanlist[i]), dev->iobase + PCL818_RANGE); /* select gain */
}
- comedi_udelay(1);
+ udelay(1);
/* select channel interval to scan */
outb(devpriv->act_chanlist[0] | (devpriv->act_chanlist[seglen -
struct comedi_cmd *cmd = &s->async->cmd;
int retval;
- rt_printk("pcl818_ai_cmd()\n");
+ printk("pcl818_ai_cmd()\n");
devpriv->ai_n_chan = cmd->chanlist_len;
devpriv->ai_chanlist = cmd->chanlist;
devpriv->ai_flags = cmd->flags;
if (cmd->convert_src == TRIG_TIMER) { /* mode 1 */
devpriv->ai_timer1 = cmd->convert_arg;
retval = pcl818_ai_cmd_mode(1, dev, s);
- rt_printk("pcl818_ai_cmd() end\n");
+ printk("pcl818_ai_cmd() end\n");
return retval;
}
if (cmd->convert_src == TRIG_EXT) { /* mode 3 */
static int pcl818_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
if (devpriv->irq_blocked > 0) {
- rt_printk("pcl818_ai_cancel()\n");
+ printk("pcl818_ai_cancel()\n");
devpriv->irq_was_now_closed = 1;
switch (devpriv->ai_mode) {
case INT_TYPE_AO3_INT:
#endif
outb(inb(dev->iobase + PCL818_CONTROL) & 0x73, dev->iobase + PCL818_CONTROL); /* Stop A/D */
- comedi_udelay(1);
+ udelay(1);
start_pacer(dev, -1, 0, 0);
outb(0, dev->iobase + PCL818_AD_LO);
inb(dev->iobase + PCL818_AD_LO);
}
end:
- rt_printk("pcl818_ai_cancel() end\n");
+ printk("pcl818_ai_cancel() end\n");
return 0;
}
static int pcl818_check(unsigned long iobase)
{
outb(0x00, iobase + PCL818_MUX);
- comedi_udelay(1);
+ udelay(1);
if (inb(iobase + PCL818_MUX) != 0x00)
return 1; /* there isn't card */
outb(0x55, iobase + PCL818_MUX);
- comedi_udelay(1);
+ udelay(1);
if (inb(iobase + PCL818_MUX) != 0x55)
return 1; /* there isn't card */
outb(0x00, iobase + PCL818_MUX);
- comedi_udelay(1);
+ udelay(1);
outb(0x18, iobase + PCL818_CONTROL);
- comedi_udelay(1);
+ udelay(1);
if (inb(iobase + PCL818_CONTROL) != 0x18)
return 1; /* there isn't card */
return 0; /* ok, card exist */
}
outb(0, dev->iobase + PCL818_DA_LO); /* DAC=0V */
outb(0, dev->iobase + PCL818_DA_HI);
- comedi_udelay(1);
+ udelay(1);
outb(0, dev->iobase + PCL818_DO_HI); /* DO=$0000 */
outb(0, dev->iobase + PCL818_DO_LO);
- comedi_udelay(1);
+ udelay(1);
outb(0, dev->iobase + PCL818_CONTROL);
outb(0, dev->iobase + PCL818_CNTENABLE);
outb(0, dev->iobase + PCL818_MUX);
*/
static void free_resources(struct comedi_device *dev)
{
- /* rt_printk("free_resource()\n"); */
+ /* printk("free_resource()\n"); */
if (dev->private) {
pcl818_ai_cancel(dev, devpriv->sub_ai);
pcl818_reset(dev);
free_pages(devpriv->dmabuf[1], devpriv->dmapages[1]);
#ifdef unused
if (devpriv->rtc_irq)
- comedi_free_irq(devpriv->rtc_irq, dev);
+ free_irq(devpriv->rtc_irq, dev);
if ((devpriv->dma_rtc) && (RTC_lock == 1)) {
if (devpriv->rtc_iobase)
release_region(devpriv->rtc_iobase,
free_irq(dev->irq, dev);
if (dev->iobase)
release_region(dev->iobase, devpriv->io_range);
- /* rt_printk("free_resource() end\n"); */
+ /* printk("free_resource() end\n"); */
}
/*
devpriv->usefifo = 1;
}
if (!request_region(iobase, devpriv->io_range, "pcl818")) {
- rt_printk("I/O port conflict\n");
+ printk("I/O port conflict\n");
return -EIO;
}
dev->iobase = iobase;
if (pcl818_check(iobase)) {
- rt_printk(", I can't detect board. FAIL!\n");
+ printk(", I can't detect board. FAIL!\n");
return -EIO;
}
irq = it->options[1];
if (irq) { /* we want to use IRQ */
if (((1 << irq) & this_board->IRQbits) == 0) {
- rt_printk
+ printk
(", IRQ %u is out of allowed range, DISABLING IT",
irq);
irq = 0; /* Bad IRQ */
} else {
- if (comedi_request_irq(irq, interrupt_pcl818, 0,
- "pcl818", dev)) {
- rt_printk
+ if (request_irq(irq, interrupt_pcl818, 0, "pcl818", dev)) {
+ printk
(", unable to allocate IRQ %u, DISABLING IT",
irq);
irq = 0; /* Can't use IRQ */
} else {
- rt_printk(", irq=%u", irq);
+ printk(", irq=%u", irq);
}
}
}
devpriv->rtc_iobase = RTC_PORT(0);
devpriv->rtc_iosize = RTC_IO_EXTENT;
RTC_lock++;
- if (!comedi_request_irq(RTC_IRQ,
- interrupt_pcl818_ai_mode13_dma_rtc, 0,
+ if (!request_irq(RTC_IRQ, interrupt_pcl818_ai_mode13_dma_rtc, 0,
"pcl818 DMA (RTC)", dev)) {
devpriv->dma_rtc = 1;
devpriv->rtc_irq = RTC_IRQ;
- rt_printk(", dma_irq=%u", devpriv->rtc_irq);
+ printk(", dma_irq=%u", devpriv->rtc_irq);
} else {
RTC_lock--;
if (RTC_lock == 0) {
if (dma < 1)
goto no_dma; /* DMA disabled */
if (((1 << dma) & this_board->DMAbits) == 0) {
- rt_printk(", DMA is out of allowed range, FAIL!\n");
+ printk(", DMA is out of allowed range, FAIL!\n");
return -EINVAL; /* Bad DMA */
}
ret = request_dma(dma, "pcl818");
if (ret) {
- rt_printk(", unable to allocate DMA %u, FAIL!\n", dma);
+ printk(", unable to allocate DMA %u, FAIL!\n", dma);
return -EBUSY; /* DMA isn't free */
}
devpriv->dma = dma;
- rt_printk(", dma=%u", dma);
+ printk(", dma=%u", dma);
pages = 2; /* we need 16KB */
devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
if (!devpriv->dmabuf[0]) {
- rt_printk(", unable to allocate DMA buffer, FAIL!\n");
+ printk(", unable to allocate DMA buffer, FAIL!\n");
/* maybe experiment with try_to_free_pages() will help .... */
return -EBUSY; /* no buffer :-( */
}
devpriv->dmapages[0] = pages;
devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]);
devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE;
- /* rt_printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */
+ /* printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */
if (devpriv->dma_rtc == 0) { /* we must do duble buff :-( */
devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
if (!devpriv->dmabuf[1]) {
- rt_printk
+ printk
(", unable to allocate DMA buffer, FAIL!\n");
return -EBUSY;
}
pcl818_reset(dev);
- rt_printk("\n");
+ printk("\n");
return 0;
}
*/
static int pcl818_detach(struct comedi_device *dev)
{
- /* rt_printk("comedi%d: pcl818: remove\n", dev->minor); */
+ /* printk("comedi%d: pcl818: remove\n", dev->minor); */
free_resources(dev);
return 0;
}
dev->iobase + 16 + asic * ASIC_IOSIZE;
devpriv->asics[asic].irq = 0; /* this gets actually set at the end of
this function when we
- comedi_request_irqs */
+ request_irqs */
spin_lock_init(&devpriv->asics[asic].spinlock);
}
for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
if (irq[asic]
- && comedi_request_irq(irq[asic], interrupt_pcmmio,
+ && request_irq(irq[asic], interrupt_pcmmio,
IRQF_SHARED, thisboard->name, dev)) {
int i;
/* unroll the allocated irqs.. */
for (i = asic - 1; i >= 0; --i) {
- comedi_free_irq(irq[i], dev);
+ free_irq(irq[i], dev);
devpriv->asics[i].irq = irq[i] = 0;
}
irq[asic] = 0;
for (i = 0; i < MAX_ASICS; ++i) {
if (devpriv && devpriv->asics[i].irq)
- comedi_free_irq(devpriv->asics[i].irq, dev);
+ free_irq(devpriv->asics[i].irq, dev);
}
if (devpriv && devpriv->sprivs)
/* it is an interrupt for ASIC #asic */
unsigned char int_pend;
- comedi_spin_lock_irqsave(&devpriv->asics[asic].spinlock,
- flags);
+ spin_lock_irqsave(&devpriv->asics[asic].spinlock, flags);
int_pend = inb(iobase + REG_INT_PENDING) & 0x07;
++got1;
}
- comedi_spin_unlock_irqrestore(&devpriv->asics[asic].
- spinlock, flags);
+ spin_unlock_irqrestore(&devpriv->asics[asic]. spinlock, flags);
if (triggered) {
struct comedi_subdevice *s;
unsigned long flags;
unsigned oldevents;
- comedi_spin_lock_irqsave
- (&subpriv->dio.intr.
- spinlock, flags);
+ spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
oldevents = s->async->events;
}
}
- comedi_spin_unlock_irqrestore
- (&subpriv->dio.intr.
- spinlock, flags);
+ spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
if (oldevents !=
s->async->events) {
{
unsigned long flags;
- comedi_spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
+ spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
if (subpriv->dio.intr.active)
pcmmio_stop_intr(dev, s);
- comedi_spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
+ spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
return 0;
}
if (trignum != 0)
return -EINVAL;
- comedi_spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
+ spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
s->async->inttrig = 0;
if (subpriv->dio.intr.active) {
event = pcmmio_start_intr(dev, s);
}
- comedi_spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
+ spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
if (event) {
comedi_event(dev, s);
unsigned long flags;
int event = 0;
- comedi_spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
+ spin_lock_irqsave(&subpriv->dio.intr.spinlock, flags);
subpriv->dio.intr.active = 1;
/* Set up end of acquisition. */
event = pcmmio_start_intr(dev, s);
break;
}
- comedi_spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
+ spin_unlock_irqrestore(&subpriv->dio.intr.spinlock, flags);
if (event) {
comedi_event(dev, s);
devpriv->asics[asic].iobase = dev->iobase + asic * ASIC_IOSIZE;
devpriv->asics[asic].irq = 0; /* this gets actually set at the end of
this function when we
- comedi_request_irqs */
+ request_irqs */
spin_lock_init(&devpriv->asics[asic].spinlock);
}
for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
if (irq[asic]
- && comedi_request_irq(irq[asic], interrupt_pcmuio,
+ && request_irq(irq[asic], interrupt_pcmuio,
IRQF_SHARED, thisboard->name, dev)) {
int i;
/* unroll the allocated irqs.. */
for (i = asic - 1; i >= 0; --i) {
- comedi_free_irq(irq[i], dev);
+ free_irq(irq[i], dev);
devpriv->asics[i].irq = irq[i] = 0;
}
irq[asic] = 0;
for (i = 0; i < MAX_ASICS; ++i) {
if (devpriv->asics[i].irq)
- comedi_free_irq(devpriv->asics[i].irq, dev);
+ free_irq(devpriv->asics[i].irq, dev);
}
if (devpriv && devpriv->sprivs)
/* it is an interrupt for ASIC #asic */
unsigned char int_pend;
- comedi_spin_lock_irqsave(&devpriv->asics[asic].spinlock,
- flags);
+ spin_lock_irqsave(&devpriv->asics[asic].spinlock, flags);
int_pend = inb(iobase + REG_INT_PENDING) & 0x07;
++got1;
}
- comedi_spin_unlock_irqrestore(&devpriv->asics[asic].
- spinlock, flags);
+ spin_unlock_irqrestore(&devpriv->asics[asic].spinlock, flags);
if (triggered) {
struct comedi_subdevice *s;
unsigned long flags;
unsigned oldevents;
- comedi_spin_lock_irqsave
- (&subpriv->intr.
- spinlock, flags);
+ spin_lock_irqsave (&subpriv->intr.spinlock, flags);
oldevents = s->async->events;
}
}
- comedi_spin_unlock_irqrestore
- (&subpriv->intr.
- spinlock, flags);
+ spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
if (oldevents !=
s->async->events) {
{
unsigned long flags;
- comedi_spin_lock_irqsave(&subpriv->intr.spinlock, flags);
+ spin_lock_irqsave(&subpriv->intr.spinlock, flags);
if (subpriv->intr.active)
pcmuio_stop_intr(dev, s);
- comedi_spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
+ spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
return 0;
}
if (trignum != 0)
return -EINVAL;
- comedi_spin_lock_irqsave(&subpriv->intr.spinlock, flags);
+ spin_lock_irqsave(&subpriv->intr.spinlock, flags);
s->async->inttrig = 0;
if (subpriv->intr.active) {
event = pcmuio_start_intr(dev, s);
}
- comedi_spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
+ spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
if (event) {
comedi_event(dev, s);
unsigned long flags;
int event = 0;
- comedi_spin_lock_irqsave(&subpriv->intr.spinlock, flags);
+ spin_lock_irqsave(&subpriv->intr.spinlock, flags);
subpriv->intr.active = 1;
/* Set up end of acquisition. */
event = pcmuio_start_intr(dev, s);
break;
}
- comedi_spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
+ spin_unlock_irqrestore(&subpriv->intr.spinlock, flags);
if (event) {
comedi_event(dev, s);
/* wait to make sure done bit is zero */
for (i = 0; (dma_status & PLX_DMA_DONE_BIT) && i < timeout; i++) {
- comedi_udelay(1);
+ udelay(1);
dma_status = readb(dma_cs_addr);
}
if (i == timeout) {
- rt_printk
+ printk
("plx9080: cancel() timed out waiting for dma %i done clear\n",
channel);
return -ETIMEDOUT;
/* wait for dma done bit */
dma_status = readb(dma_cs_addr);
for (i = 0; (dma_status & PLX_DMA_DONE_BIT) == 0 && i < timeout; i++) {
- comedi_udelay(1);
+ udelay(1);
dma_status = readb(dma_cs_addr);
}
if (i == timeout) {
- rt_printk
+ printk
("plx9080: cancel() timed out waiting for dma %i done set\n",
channel);
return -ETIMEDOUT;
#define RTD_DMA_TIMEOUT 33000 /* 1 msec */
#else
/* by delaying, power and electrical noise are reduced somewhat */
-#define WAIT_QUIETLY comedi_udelay (1)
+#define WAIT_QUIETLY udelay (1)
#define RTD_ADC_TIMEOUT 2000 /* in usec */
#define RTD_DAC_TIMEOUT 2000 /* in usec */
#define RTD_DMA_TIMEOUT 1000 /* in usec */
/* initialize board, per RTD spec */
/* also, initialize shadow registers */
RtdResetBoard(dev);
- comedi_udelay(100); /* needed? */
+ udelay(100); /* needed? */
RtdPlxInterruptWrite(dev, 0);
RtdInterruptMask(dev, 0); /* and sets shadow */
RtdInterruptClearMask(dev, ~0); /* and sets shadow */
/* TODO: set user out source ??? */
/* check if our interrupt is available and get it */
- ret = comedi_request_irq(devpriv->pci_dev->irq, rtd_interrupt,
+ ret = request_irq(devpriv->pci_dev->irq, rtd_interrupt,
IRQF_SHARED, DRV_NAME, dev);
if (ret < 0) {
/* disable interrupt controller */
RtdPlxInterruptWrite(dev, RtdPlxInterruptRead(dev)
& ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E));
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
/* release all regions that were allocated */
/* disable interrupt controller */
RtdPlxInterruptWrite(dev, RtdPlxInterruptRead(dev)
& ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E));
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
}
/* release all regions that were allocated */
unsigned fifo_status;
/* trigger conversion */
RtdAdcStart(dev);
- comedi_udelay(1);
+ udelay(1);
fifo_status = RtdFifoStatus(dev);
if ((fifo_status & FS_ADC_HEMPTY) == 0) {
fifo_size = 2 * i;
}
if (i == limit)
{
- rt_printk("\ncomedi: %s: failed to probe fifo size.\n", DRV_NAME);
+ printk("\ncomedi: %s: failed to probe fifo size.\n", DRV_NAME);
return -EIO;
}
RtdAdcClearFifo(dev);
if (fifo_size != 0x400 && fifo_size != 0x2000)
{
- rt_printk("\ncomedi: %s: unexpected fifo size of %i, expected 1024 or 8192.\n",
+ printk("\ncomedi: %s: unexpected fifo size of %i, expected 1024 or 8192.\n",
DRV_NAME, fifo_size);
return -EIO;
}
+ ((channel == 0) ? LCFG_DMACSR0 : LCFG_DMACSR1);
/* spinlock for plx dma control/status reg */
- /* comedi_spin_lock_irqsave( &dev->spinlock, flags ); */
+ /* spin_lock_irqsave( &dev->spinlock, flags ); */
/* abort dma transfer if necessary */
status = readb(dma_cs_addr);
/* disable channel (required) */
writeb(0, dma_cs_addr);
- comedi_udelay(1); /* needed?? */
+ udelay(1); /* needed?? */
/* set abort bit for channel */
writeb(PLX_DMA_ABORT_BIT, dma_cs_addr);
}
abortDmaExit:
- /* comedi_spin_unlock_irqrestore( &dev->spinlock, flags ); */
+ /* spin_unlock_irqrestore( &dev->spinlock, flags ); */
}
/*
* gets set, and you will have an error. */
if (insn->n > 0) {
BUG_ON(gain >= ARRAY_SIZE(gaindelay));
- comedi_udelay(gaindelay[gain]);
+ udelay(gaindelay[gain]);
}
}
for (t = RTI800_TIMEOUT; t; t--) {
status = inb(dev->iobase + RTI800_CSR);
if (status & RTI800_OVERRUN) {
- rt_printk("rti800: a/d overrun\n");
+ printk("rti800: a/d overrun\n");
outb(0, dev->iobase + RTI800_CLRFLAGS);
return -EIO;
}
if (status & RTI800_DONE)
break;
- comedi_udelay(1);
+ udelay(1);
}
if (t == 0) {
- rt_printk("rti800: timeout\n");
+ printk("rti800: timeout\n");
return -ETIME;
}
data[i] = inb(dev->iobase + RTI800_ADCLO);
irq = it->options[1];
if (irq) {
printk("( irq = %u )", irq);
- ret = comedi_request_irq(irq, rti800_interrupt, 0,
- "rti800", dev);
+ ret = request_irq(irq, rti800_interrupt, 0, "rti800", dev);
if (ret < 0) {
printk(" Failed to allocate IRQ\n");
return ret;
release_region(dev->iobase, RTI800_SIZE);
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
return 0;
}
}
}
if (i == TIMEOUT) {
- /* rt_printk() should be used instead of printk()
+ /* printk() should be used instead of printk()
* whenever the code can be called from real-time. */
- rt_printk("s526: ADC(0x%04x) timeout\n",
+ printk("s526: ADC(0x%04x) timeout\n",
inw(ADDR_REG(REG_ISR)));
return -ETIMEDOUT;
}
if (dev->irq == 0) {
printk(" unknown irq (bad)\n");
} else {
- ret = comedi_request_irq(dev->irq, s626_irq_handler,
- IRQF_SHARED, "s626", dev);
+ ret = request_irq(dev->irq, s626_irq_handler, IRQF_SHARED,
+ "s626", dev);
if (ret < 0) {
printk(" irq not available\n");
if (dev->attached == 0)
return IRQ_NONE;
/* lock to avoid race with comedi_poll */
- comedi_spin_lock_irqsave(&dev->spinlock, flags);
+ spin_lock_irqsave(&dev->spinlock, flags);
/* save interrupt enable register state */
irqstatus = readl(devpriv->base_addr + P_IER);
DEBUG("s626_irq_handler: exit interrupt service routine.\n");
- comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
+ spin_unlock_irqrestore(&dev->spinlock, flags);
return IRQ_HANDLED;
}
}
if (dev->irq)
- comedi_free_irq(dev->irq, dev);
+ free_irq(dev->irq, dev);
if (devpriv->base_addr)
iounmap(devpriv->base_addr);
for (n = 0; n < insn->n; n++) {
/* Delay 10 microseconds for analog input settling. */
- comedi_udelay(10);
+ udelay(10);
/* Start ADC by pulsing GPIO1 low. */
GpioImage = RR7146(P_GPIO);
* data value is sometimes set to the previous
* conversion's data value.
*/
- comedi_udelay(4);
+ udelay(4);
}
/* Start a dummy conversion to cause the data from the
*/
#ifdef _DEBUG_
-#define DEBUG(...); rt_printk(__VA_ARGS__);
+#define DEBUG(...); printk(__VA_ARGS__);
#else
#define DEBUG(...)
#endif
result = ch;
break;
}
- comedi_udelay(100);
+ udelay(100);
}
}
set_fs(oldfs);
break;
}
if (i == TIMEOUT) {
- /* rt_printk() should be used instead of printk()
+ /* printk() should be used instead of printk()
* whenever the code can be called from real-time. */
- rt_printk("timeout\n");
+ printk("timeout\n");
return -ETIMEDOUT;
}
usp->usp_module_type[i] = inb(subdev_iobase + 6);
printk(" [%d] 0x%02x |", i, usp->usp_module_type[i]);
- comedi_udelay(1);
+ udelay(1);
}
printk("\n");
#include "../comedi.h"
#include "../comedilib.h"
-#include "../comedidev.h" /* for comedi_udelay() */
+#include "../comedidev.h"
#include <linux/string.h>
if (retval < 0)
return retval;
- comedi_udelay((nano_sec + 999) / 1000);
+ udelay((nano_sec + 999) / 1000);
return comedi_data_read(dev, subdev, chan, range, aref, data);
}
void comedi_perror(const char *message)
{
- rt_printk("%s: unknown error\n", message);
+ printk("%s: unknown error\n", message);
}
char *comedi_strerror(int err)
ret = -EINVAL;
break;
}
- comedi_udelay(insn->data[0]);
+ udelay(insn->data[0]);
ret = 1;
break;
case INSN_INTTRIG:
break;
}
if (insn->subdev >= dev->n_subdevices) {
- rt_printk("%d not usable subdevice\n",
+ printk("%d not usable subdevice\n",
insn->subdev);
ret = -EINVAL;
break;
}
s = dev->subdevices + insn->subdev;
if (!s->async) {
- rt_printk("no async\n");
+ printk("no async\n");
ret = -EINVAL;
break;
}
if (!s->async->inttrig) {
- rt_printk("no inttrig\n");
+ printk("no inttrig\n");
ret = -EAGAIN;
break;
}
s = dev->subdevices + insn->subdev;
if (s->type == COMEDI_SUBD_UNUSED) {
- rt_printk("%d not useable subdevice\n", insn->subdev);
+ printk("%d not useable subdevice\n", insn->subdev);
ret = -EIO;
goto error;
}
ret = check_chanlist(s, 1, &insn->chanspec);
if (ret < 0) {
- rt_printk("bad chanspec\n");
+ printk("bad chanspec\n");
ret = -EINVAL;
goto error;
}
#if 0
/* XXX do we want this? -- abbotti #if'ed it out for now. */
if (ret != insn->n) {
- rt_printk("BUG: result of insn != insn.n\n");
+ printk("BUG: result of insn != insn.n\n");
ret = -EINVAL;
goto error;
}
s = dev->subdevices + subdevice;
- comedi_spin_lock_irqsave(&s->spin_lock, flags);
+ spin_lock_irqsave(&s->spin_lock, flags);
if (s->busy) {
ret = -EBUSY;
}
}
- comedi_spin_unlock_irqrestore(&s->spin_lock, flags);
+ spin_unlock_irqrestore(&s->spin_lock, flags);
return ret;
}
async = s->async;
- comedi_spin_lock_irqsave(&s->spin_lock, flags);
+ spin_lock_irqsave(&s->spin_lock, flags);
if (s->busy) {
ret = -EBUSY;
ret = 0;
}
- comedi_spin_unlock_irqrestore(&s->spin_lock, flags);
+ spin_unlock_irqrestore(&s->spin_lock, flags);
return ret;
}
if (CR_CHAN(chanlist[i]) >= s->n_chan ||
CR_RANGE(chanlist[i]) >= s->range_table->length
|| aref_invalid(s, chanlist[i])) {
- rt_printk
- ("bad chanlist[%d]=0x%08x n_chan=%d range length=%d\n",
+ printk("bad chanlist[%d]=0x%08x n_chan=%d range length=%d\n",
i, chanlist[i], s->n_chan,
s->range_table->length);
#if 0
CR_RANGE(chanlist[i]) >=
s->range_table_list[chan]->length
|| aref_invalid(s, chanlist[i])) {
- rt_printk("bad chanlist[%d]=0x%08x\n", i,
+ printk("bad chanlist[%d]=0x%08x\n", i,
chanlist[i]);
return -EINVAL;
}
}
} else {
- rt_printk("comedi: (bug) no range type list!\n");
+ printk("comedi: (bug) no range type list!\n");
return -EINVAL;
}
return 0;
projects / ~andy / linux / commitdiff