#define GP_STATUS_10G_XFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI
#define GP_STATUS_20G_DXGXS MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS
#define GP_STATUS_10G_SFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI
+#define GP_STATUS_20G_KR2 MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2
#define LINK_10THD LINK_STATUS_SPEED_AND_DUPLEX_10THD
#define LINK_10TFD LINK_STATUS_SPEED_AND_DUPLEX_10TFD
#define LINK_100TXHD LINK_STATUS_SPEED_AND_DUPLEX_100TXHD
* ports of the path
*/
- if ((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) &&
+ if (((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) ||
+ (CHIP_NUM(bp) == CHIP_NUM_57840_2_20) ||
+ (CHIP_NUM(bp) == CHIP_NUM_57840_OBSOLETE)) &&
+ is_port4mode &&
(REG_RD(bp, MISC_REG_RESET_REG_2) &
MISC_REGISTERS_RESET_REG_2_XMAC)) {
DP(NETIF_MSG_LINK,
*/
REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 0);
+ /* When XMAC is in XLGMII mode, disable sending idles for fault
+ * detection.
+ */
+ if (!(params->phy[INT_PHY].flags & FLAGS_TX_ERROR_CHECK)) {
+ REG_WR(bp, xmac_base + XMAC_REG_RX_LSS_CTRL,
+ (XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE |
+ XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE));
+ REG_WR(bp, xmac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0);
+ REG_WR(bp, xmac_base + XMAC_REG_CLEAR_RX_LSS_STATUS,
+ XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS |
+ XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS);
+ }
/* Set Max packet size */
REG_WR(bp, xmac_base + XMAC_REG_RX_MAX_SIZE, 0x2710);
/* Enable TX and RX */
val = XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN;
+ /* Set MAC in XLGMII mode for dual-mode */
+ if ((vars->line_speed == SPEED_20000) &&
+ (params->phy[INT_PHY].supported &
+ SUPPORTED_20000baseKR2_Full))
+ val |= XMAC_CTRL_REG_XLGMII_ALIGN_ENB;
+
/* Check loopback mode */
if (lb)
val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK;
port_mb[params->port].link_status), link_status);
}
+static void bnx2x_update_link_attr(struct link_params *params, u32 link_attr)
+{
+ struct bnx2x *bp = params->bp;
+
+ if (SHMEM2_HAS(bp, link_attr_sync))
+ REG_WR(bp, params->shmem2_base +
+ offsetof(struct shmem2_region,
+ link_attr_sync[params->port]), link_attr);
+}
+
static void bnx2x_update_pfc_nig(struct link_params *params,
struct link_vars *vars,
struct bnx2x_nig_brb_pfc_port_params *nig_params)
bnx2x_cl45_write(bp, phy, devad, reg, val | or_val);
}
+static void bnx2x_cl45_read_and_write(struct bnx2x *bp,
+ struct bnx2x_phy *phy,
+ u8 devad, u16 reg, u16 and_val)
+{
+ u16 val;
+ bnx2x_cl45_read(bp, phy, devad, reg, &val);
+ bnx2x_cl45_write(bp, phy, devad, reg, val & and_val);
+}
+
int bnx2x_phy_read(struct link_params *params, u8 phy_addr,
u8 devad, u16 reg, u16 *ret_val)
{
* init configuration, and set/clear SGMII flag. Internal
* phy init is done purely in phy_init stage.
*/
+static void bnx2x_warpcore_enable_AN_KR2(struct bnx2x_phy *phy,
+ struct link_params *params,
+ struct link_vars *vars)
+{
+ struct bnx2x *bp = params->bp;
+ u16 i;
+ static struct bnx2x_reg_set reg_set[] = {
+ /* Step 1 - Program the TX/RX alignment markers */
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0xa157},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xcbe2},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0x7537},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0xa157},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xcbe2},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0x7537},
+ /* Step 2 - Configure the NP registers */
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000a},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6400},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0620},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0157},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x6464},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x3150},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x3150},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0157},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0620}
+ };
+ DP(NETIF_MSG_LINK, "Enabling 20G-KR2\n");
+
+ bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL49_USERB0_CTRL, (3<<6));
+
+ for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++)
+ bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
+ reg_set[i].val);
+
+ /* Start KR2 work-around timer which handles BCM8073 link-parner */
+ vars->link_attr_sync |= LINK_ATTR_SYNC_KR2_ENABLE;
+ bnx2x_update_link_attr(params, vars->link_attr_sync);
+}
static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy,
struct link_params *params)
MDIO_WC_REG_DIGITAL4_MISC5, 0xc000);
}
+static void bnx2x_warpcore_restart_AN_KR(struct bnx2x_phy *phy,
+ struct link_params *params)
+{
+ /* Restart autoneg on the leading lane only */
+ struct bnx2x *bp = params->bp;
+ u16 lane = bnx2x_get_warpcore_lane(phy, params);
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, lane);
+ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
+ MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1200);
+
+ /* Restore AER */
+ bnx2x_set_aer_mmd(params, phy);
+}
+
static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars) {
{MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415},
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190},
/* Disable Autoneg: re-enable it after adv is done. */
- {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0}
+ {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0},
+ {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0},
};
DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n");
/* Set to default registers that may be overriden by 10G force */
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl);
- cl72_ctrl &= 0xf8ff;
+ cl72_ctrl &= 0x08ff;
cl72_ctrl |= 0x3800;
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl);
((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) |
(0x06 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) |
(0x09 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)));
+ /* Configure the next lane if dual mode */
+ if (phy->flags & FLAGS_WC_DUAL_MODE)
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_TX0_TX_DRIVER + 0x10*(lane+1),
+ ((0x02 <<
+ MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) |
+ (0x06 <<
+ MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) |
+ (0x09 <<
+ MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)));
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL,
0x03f0);
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL3_UP1, 0x1f);
- /* Enable Autoneg */
- bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
- MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1200);
+ if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
+ (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) ||
+ (phy->req_line_speed == SPEED_20000)) {
+
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, lane);
+
+ bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_RX1_PCI_CTRL + (0x10*lane),
+ (1<<11));
+
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXS_X2_CONTROL3, 0x7);
+ bnx2x_set_aer_mmd(params, phy);
+ bnx2x_warpcore_enable_AN_KR2(phy, params, vars);
+ }
+
+ /* Enable Autoneg: only on the main lane */
+ bnx2x_warpcore_restart_AN_KR(phy, params);
}
static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy,
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1},
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa},
/* Leave cl72 training enable, needed for KR */
- {MDIO_PMA_DEVAD,
- MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150,
- 0x2}
+ {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2}
};
for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++)
MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, (val & 0x7FFF));
}
-static void bnx2x_warpcore_set_20G_KR2(struct bnx2x *bp,
- struct bnx2x_phy *phy)
+static void bnx2x_warpcore_set_20G_force_KR2(struct bnx2x_phy *phy,
+ struct link_params *params)
{
- DP(NETIF_MSG_LINK, "KR2 still not supported !!!\n");
+ u16 val;
+ struct bnx2x *bp = params->bp;
+ /* Set global registers, so set AER lane to 0 */
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, 0);
+
+ /* Disable sequencer */
+ bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, ~(1<<13));
+
+ bnx2x_set_aer_mmd(params, phy);
+
+ bnx2x_cl45_read_and_write(bp, phy, MDIO_PMA_DEVAD,
+ MDIO_WC_REG_PMD_KR_CONTROL, ~(1<<1));
+ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
+ MDIO_AN_REG_CTRL, 0);
+ /* Turn off CL73 */
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL73_USERB0_CTRL, &val);
+ val &= ~(1<<5);
+ val |= (1<<6);
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL73_USERB0_CTRL, val);
+
+ /* Set 20G KR2 force speed */
+ bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x1f);
+
+ bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_DIGITAL4_MISC3, (1<<7));
+
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &val);
+ val &= ~(3<<14);
+ val |= (1<<15);
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, val);
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0x835A);
+
+ /* Enable sequencer (over lane 0) */
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, 0);
+
+ bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, (1<<13));
+
+ bnx2x_set_aer_mmd(params, phy);
}
static void bnx2x_warpcore_set_20G_DXGXS(struct bnx2x *bp,
bnx2x_sfp_module_detection(phy, params);
break;
-
case PORT_HW_CFG_NET_SERDES_IF_KR2:
- if (vars->line_speed != SPEED_20000) {
- DP(NETIF_MSG_LINK, "Speed not supported yet\n");
- return;
+ if (!params->loopback_mode) {
+ bnx2x_warpcore_enable_AN_KR(phy, params, vars);
+ } else {
+ DP(NETIF_MSG_LINK, "Setting KR 20G-Force\n");
+ bnx2x_warpcore_set_20G_force_KR2(phy, params);
}
- DP(NETIF_MSG_LINK, "Setting 20G KR2\n");
- bnx2x_warpcore_set_20G_KR2(bp, phy);
break;
-
default:
DP(NETIF_MSG_LINK,
"Unsupported Serdes Net Interface 0x%x\n",
DP(NETIF_MSG_LINK, "Setting Warpcore loopback type %x, speed %d\n",
params->loopback_mode, phy->req_line_speed);
- if (phy->req_line_speed < SPEED_10000) {
- /* 10/100/1000 */
+ if (phy->req_line_speed < SPEED_10000 ||
+ phy->supported & SUPPORTED_20000baseKR2_Full) {
+ /* 10/100/1000/20G-KR2 */
/* Update those 1-copy registers */
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
lane = bnx2x_get_warpcore_lane(phy, params);
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_XGXSBLK1_LANECTRL2, &val16);
+ val16 |= (1<<lane);
+ if (phy->flags & FLAGS_WC_DUAL_MODE)
+ val16 |= (2<<lane);
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_XGXSBLK1_LANECTRL2,
- val16 | (1<<lane));
+ val16);
/* Switch back to 4-copy registers */
bnx2x_set_aer_mmd(params, phy);
} else {
- /* 10G & 20G */
+ /* 10G / 20G-DXGXS */
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_COMBO_IEEE0_MIICTRL,
0x4000);
-
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1);
}
params->feature_config_flags &=
~FEATURE_CONFIG_PFC_ENABLED;
+ if (SHMEM2_HAS(bp, link_attr_sync))
+ vars->link_attr_sync = SHMEM2_RD(bp,
+ link_attr_sync[params->port]);
+
DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x int_mask 0x%x\n",
vars->link_status, vars->phy_link_up, vars->aeu_int_mask);
DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n",
vars->link_status |= LINK_10GTFD;
break;
case GP_STATUS_20G_DXGXS:
+ case GP_STATUS_20G_KR2:
vars->line_speed = SPEED_20000;
vars->link_status |= LINK_20GTFD;
break;
int rc = 0;
lane = bnx2x_get_warpcore_lane(phy, params);
/* Read gp_status */
- if (phy->req_line_speed > SPEED_10000) {
+ if ((params->loopback_mode) &&
+ (phy->flags & FLAGS_WC_DUAL_MODE)) {
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up);
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up);
+ link_up &= 0x1;
+ } else if ((phy->req_line_speed > SPEED_10000) &&
+ (phy->supported & SUPPORTED_20000baseMLD2_Full)) {
u16 temp_link_up;
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
1, &temp_link_up);
bnx2x_ext_phy_resolve_fc(phy, params, vars);
} else {
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_GP2_STATUS_GP_2_1, &gp_status1);
+ MDIO_WC_REG_GP2_STATUS_GP_2_1,
+ &gp_status1);
DP(NETIF_MSG_LINK, "0x81d1 = 0x%x\n", gp_status1);
- /* Check for either KR or generic link up. */
- gp_status1 = ((gp_status1 >> 8) & 0xf) |
- ((gp_status1 >> 12) & 0xf);
- link_up = gp_status1 & (1 << lane);
+ /* Check for either KR, 1G, or AN up. */
+ link_up = ((gp_status1 >> 8) |
+ (gp_status1 >> 12) |
+ (gp_status1)) &
+ (1 << lane);
+ if (phy->supported & SUPPORTED_20000baseKR2_Full) {
+ u16 an_link;
+ bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
+ MDIO_AN_REG_STATUS, &an_link);
+ bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
+ MDIO_AN_REG_STATUS, &an_link);
+ link_up |= (an_link & (1<<2));
+ }
if (link_up && SINGLE_MEDIA_DIRECT(params)) {
u16 pd, gp_status4;
if (phy->req_line_speed == SPEED_AUTO_NEG) {
if ((lane & 1) == 0)
gp_speed <<= 8;
gp_speed &= 0x3f00;
-
+ link_up = !!link_up;
rc = bnx2x_get_link_speed_duplex(phy, params, vars, link_up, gp_speed,
duplex);
phy->media_type = ETH_PHY_KR;
phy->flags |= FLAGS_WC_DUAL_MODE;
phy->supported &= (SUPPORTED_20000baseKR2_Full |
+ SUPPORTED_Autoneg |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
+ phy->flags &= ~FLAGS_TX_ERROR_CHECK;
break;
default:
DP(NETIF_MSG_LINK, "Unknown WC interface type 0x%x\n",
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
+ struct bnx2x_phy *int_phy = ¶ms->phy[INT_PHY];
vars->link_up = 1;
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->duplex = DUPLEX_FULL;
if (params->req_line_speed[0] == SPEED_1000)
vars->line_speed = SPEED_1000;
+ else if ((params->req_line_speed[0] == SPEED_20000) ||
+ (int_phy->flags & FLAGS_WC_DUAL_MODE))
+ vars->line_speed = SPEED_20000;
else
- vars->line_speed = SPEED_10000;
+ vars->line_speed = SPEED_10000;
if (!USES_WARPCORE(bp))
bnx2x_xgxs_deassert(params);
}
}
}
+static void bnx2x_disable_kr2(struct link_params *params,
+ struct link_vars *vars,
+ struct bnx2x_phy *phy)
+{
+ struct bnx2x *bp = params->bp;
+ int i;
+ static struct bnx2x_reg_set reg_set[] = {
+ /* Step 1 - Program the TX/RX alignment markers */
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xe647},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0xc4f0},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0x7690},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xe647},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0xc4f0},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000c},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6000},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0000},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0002},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x0000},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x0af7},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x0af7},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002},
+ {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000}
+ };
+ DP(NETIF_MSG_LINK, "Disabling 20G-KR2\n");
+
+ for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++)
+ bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
+ reg_set[i].val);
+ vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE;
+ bnx2x_update_link_attr(params, vars->link_attr_sync);
+
+ /* Restart AN on leading lane */
+ bnx2x_warpcore_restart_AN_KR(phy, params);
+}
+
+static void bnx2x_kr2_recovery(struct link_params *params,
+ struct link_vars *vars,
+ struct bnx2x_phy *phy)
+{
+ struct bnx2x *bp = params->bp;
+ DP(NETIF_MSG_LINK, "KR2 recovery\n");
+ bnx2x_warpcore_enable_AN_KR2(phy, params, vars);
+ bnx2x_warpcore_restart_AN_KR(phy, params);
+}
+
+static void bnx2x_check_kr2_wa(struct link_params *params,
+ struct link_vars *vars,
+ struct bnx2x_phy *phy)
+{
+ struct bnx2x *bp = params->bp;
+ u16 base_page, next_page, not_kr2_device, lane;
+ int sigdet = bnx2x_warpcore_get_sigdet(phy, params);
+
+ if (!sigdet) {
+ if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE))
+ bnx2x_kr2_recovery(params, vars, phy);
+ return;
+ }
+
+ lane = bnx2x_get_warpcore_lane(phy, params);
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, lane);
+ bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
+ MDIO_AN_REG_LP_AUTO_NEG, &base_page);
+ bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
+ MDIO_AN_REG_LP_AUTO_NEG2, &next_page);
+ bnx2x_set_aer_mmd(params, phy);
+
+ /* CL73 has not begun yet */
+ if (base_page == 0) {
+ if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE))
+ bnx2x_kr2_recovery(params, vars, phy);
+ return;
+ }
+
+ /* In case NP bit is not set in the BasePage, or it is set,
+ * but only KX is advertised, declare this link partner as non-KR2
+ * device.
+ */
+ not_kr2_device = (((base_page & 0x8000) == 0) ||
+ (((base_page & 0x8000) &&
+ ((next_page & 0xe0) == 0x2))));
+
+ /* In case KR2 is already disabled, check if we need to re-enable it */
+ if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
+ if (!not_kr2_device) {
+ DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page,
+ next_page);
+ bnx2x_kr2_recovery(params, vars, phy);
+ }
+ return;
+ }
+ /* KR2 is enabled, but not KR2 device */
+ if (not_kr2_device) {
+ /* Disable KR2 on both lanes */
+ DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page, next_page);
+ bnx2x_disable_kr2(params, vars, phy);
+ return;
+ }
+}
+
void bnx2x_period_func(struct link_params *params, struct link_vars *vars)
{
u16 phy_idx;
if (CHIP_IS_E3(bp)) {
struct bnx2x_phy *phy = ¶ms->phy[INT_PHY];
bnx2x_set_aer_mmd(params, phy);
+ if ((phy->supported & SUPPORTED_20000baseKR2_Full) &&
+ (phy->speed_cap_mask & SPEED_20000))
+ bnx2x_check_kr2_wa(params, vars, phy);
bnx2x_check_over_curr(params, vars);
if (vars->rx_tx_asic_rst)
bnx2x_warpcore_config_runtime(phy, params, vars);
projects / ~andy / linux / commitdiff