};
/* this gets called as part of our init. these steps must be done now so
- * that we can use set_pxa_fb_info */
+ * that we can use pxa_set_fb_info */
static void __init am200_presetup_fb(void)
{
int fw;
/* we divide since we told the LCD controller we're 16bpp */
am200_fb_info.modes->xres /= 2;
- set_pxa_fb_info(&am200_fb_info);
+ pxa_set_fb_info(NULL, &am200_fb_info);
}
}
balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
- set_pxa_fb_info(&balloon3_lcd_screen);
+ pxa_set_fb_info(NULL, &balloon3_lcd_screen);
return;
err2:
static void __init cmx2xx_init_display(void)
{
- set_pxa_fb_info(cmx2xx_display);
+ pxa_set_fb_info(NULL, cmx2xx_display);
}
#else
static inline void cmx2xx_init_display(void) {}
static void __init cm_x300_init_lcd(void)
{
- set_pxa_fb_info(&cm_x300_lcd);
+ pxa_set_fb_info(NULL, &cm_x300_lcd);
}
#else
static inline void cm_x300_init_lcd(void) {}
static void __init income_lcd_init(void)
{
- set_pxa_fb_info(&income_lcd_screen);
+ pxa_set_fb_info(NULL, &income_lcd_screen);
}
#else
static inline void income_lcd_init(void) {}
lcd_bl_pin = bl_pin;
gpio_request(bl_pin, "lcd backlight");
gpio_direction_output(bl_pin, 0);
- set_pxa_fb_info(&sharp_lq43_info);
+ pxa_set_fb_info(NULL, &sharp_lq43_info);
}
#endif
.resource = pxafb_resources,
};
-void __init set_pxa_fb_info(struct pxafb_mach_info *info)
+void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info)
{
+ pxa_device_fb.dev.parent = parent;
pxa_register_device(&pxa_device_fb, info);
}
-void __init set_pxa_fb_parent(struct device *parent_dev)
-{
- pxa_device_fb.dev.parent = parent_dev;
-}
-
static struct resource pxa_resource_ffuart[] = {
{
.start = 0x40100000,
static void __init em_x270_init_lcd(void)
{
- set_pxa_fb_info(&em_x270_lcd);
+ pxa_set_fb_info(NULL, &em_x270_lcd);
}
#else
static inline void em_x270_init_lcd(void) {}
/* Fixme - e400 may have a switched clock */
eseries_register_clks();
eseries_get_tmio_gpios();
- set_pxa_fb_info(&e400_pxafb_mach_info);
+ pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
platform_add_devices(ARRAY_AND_SIZE(e400_devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
}
pxa_set_i2c_info(NULL);
- set_pxa_fb_info(&ezx_fb_info_1);
+ pxa_set_fb_info(NULL, &ezx_fb_info_1);
pxa_set_keypad_info(&a780_keypad_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_1);
+ pxa_set_fb_info(NULL, &ezx_fb_info_1);
pxa_set_keypad_info(&e680_keypad_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_2);
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
pxa_set_keypad_info(&a1200_keypad_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_2);
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
pxa_set_keypad_info(&a910_keypad_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_2);
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
pxa_set_keypad_info(&e6_keypad_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
- set_pxa_fb_info(&ezx_fb_info_2);
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
pxa_set_keypad_info(&e2_keypad_platform_data);
platform_device_register(&smc91x_device);
//platform_device_register(&mst_audio_device);
- set_pxa_fb_info(&sharp_lm8v31);
+ pxa_set_fb_info(NULL, &sharp_lm8v31);
pxa_set_mci_info(&idp_mci_platform_data);
}
void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
void (*smart_update)(struct fb_info *);
};
-void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
-void set_pxa_fb_parent(struct device *parent_dev);
+
+void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
unsigned long pxafb_get_hsync_time(struct device *dev);
extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
static void littleton_init_lcd(void)
{
- set_pxa_fb_info(&littleton_lcd_info);
+ pxa_set_fb_info(NULL, &littleton_lcd_info);
}
#else
static inline void littleton_init_lcd(void) {};
pxa_set_ac97_info(NULL);
if (lpd270_lcd_to_use != NULL)
- set_pxa_fb_info(lpd270_lcd_to_use);
+ pxa_set_fb_info(NULL, lpd270_lcd_to_use);
pxa_set_ohci_info(&lpd270_ohci_platform_data);
}
clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
pxa_set_udc_info(&udc_info);
- set_pxa_fb_info(&sharp_lm8v31);
+ pxa_set_fb_info(NULL, &sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
pxa_set_ficp_info(&lubbock_ficp_platform_data);
pxa_set_ac97_info(NULL);
gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0);
gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0);
gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0);
- set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info);
+ pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
} else
pr_err("LCD detection: CPLD mapping failed\n");
}
else
mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
- set_pxa_fb_info(&mainstone_pxafb_info);
+ pxa_set_fb_info(NULL, &mainstone_pxafb_info);
mainstone_backlight_register();
pxa_set_mci_info(&mainstone_mci_platform_data);
pxa_set_stuart_info(NULL);
mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
bootstrap_init();
- set_pxa_fb_info(&mioa701_pxafb_info);
+ pxa_set_fb_info(NULL, &mioa701_pxafb_info);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
pxa_set_udc_info(&mioa701_udc_info);
palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
}
- set_pxa_fb_info(&palm27x_lcd_screen);
+ pxa_set_fb_info(NULL, &palm27x_lcd_screen);
}
#endif
static void __init palmtc_lcd_init(void)
{
- set_pxa_fb_info(&palmtc_lcd_screen);
+ pxa_set_fb_info(NULL, &palmtc_lcd_screen);
}
#else
static inline void palmtc_lcd_init(void) {}
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- set_pxa_fb_info(&palmte2_lcd_screen);
+ pxa_set_fb_info(NULL, &palmte2_lcd_screen);
pxa_set_mci_info(&palmte2_mci_platform_data);
palmte2_udc_init();
pxa_set_ac97_info(&palmte2_ac97_pdata);
pcm990_init_irq();
#ifndef CONFIG_PCM990_DISPLAY_NONE
- set_pxa_fb_info(&pcm990_fbinfo);
+ pxa_set_fb_info(NULL, &pcm990_fbinfo);
#endif
platform_device_register(&pcm990_backlight_device);
if (ret)
pr_warning("poodle: Unable to register LoCoMo device\n");
- set_pxa_fb_parent(&poodle_locomo_device.dev);
- set_pxa_fb_info(&poodle_fb_info);
+ pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
{
int ret;
- set_pxa_fb_info(&raumfeld_sharp_lcd_info);
+ pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
/* Earlier devices had the backlight regulator controlled
* via PWM, later versions use another controller for that */
static void __init saar_init_lcd(void)
{
- set_pxa_fb_info(&saar_lcd_info);
+ pxa_set_fb_info(NULL, &saar_lcd_info);
}
#else
static inline void saar_init_lcd(void) {}
static void __init spitz_lcd_init(void)
{
- set_pxa_fb_info(&spitz_pxafb_info);
+ pxa_set_fb_info(NULL, &spitz_pxafb_info);
}
#else
static inline void spitz_lcd_init(void) {}
{
platform_device_register(&tavorevb_backlight_devices[0]);
platform_device_register(&tavorevb_backlight_devices[1]);
- set_pxa_fb_info(&tavorevb_lcd_info);
+ pxa_set_fb_info(NULL, &tavorevb_lcd_info);
}
#else
static inline void tavorevb_init_lcd(void) {}
pxa_set_stuart_info(NULL);
if (0) /* dont know how to determine LCD */
- set_pxa_fb_info(&sharp_lcd);
+ pxa_set_fb_info(NULL, &sharp_lcd);
else
- set_pxa_fb_info(&toshiba_lcd);
+ pxa_set_fb_info(NULL, &toshiba_lcd);
pxa_set_mci_info(&trizeps4_mci_platform_data);
#ifndef STATUS_LEDS_ON_STUART_PINS
/* Wake-up serial console */
viper_init_serial_gpio();
- set_pxa_fb_info(&fb_info);
+ pxa_set_fb_info(NULL, &fb_info);
/* v1 hardware cannot use the datacs line */
version = viper_hw_version();
}
vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
- set_pxa_fb_info(&vpac270_lcd_screen);
+ pxa_set_fb_info(NULL, &vpac270_lcd_screen);
return;
err2:
static void __init z2_lcd_init(void)
{
- set_pxa_fb_info(&z2_lcd_screen);
+ pxa_set_fb_info(NULL, &z2_lcd_screen);
}
#else
static inline void z2_lcd_init(void) {}
if (zeus_setup_fb_gpios())
pr_err("Failed to setup fb gpios\n");
else
- set_pxa_fb_info(&zeus_fb_info);
+ pxa_set_fb_info(NULL, &zeus_fb_info);
pxa_set_mci_info(&zeus_mci_platform_data);
pxa_set_udc_info(&zeus_udc_info);
platform_device_register(&zylonite_backlight_device);
if (lcd_id & 0x20) {
- set_pxa_fb_info(&zylonite_sharp_lcd_info);
+ pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
return;
}
else
zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
- set_pxa_fb_info(&zylonite_toshiba_lcd_info);
+ pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
}
#else
static inline void zylonite_init_lcd(void) {}
projects / ~andy / linux / commitdiff