class/input/event*/device/capabilities/, and the properties of a device are
provided in class/input/event*/device/properties.
-Types:
-==========
-Types are groupings of codes under a logical input construct. Each type has a
-set of applicable codes to be used in generating events. See the Codes section
-for details on valid codes for each type.
+Event types:
+===========
+Event types are groupings of codes under a logical input construct. Each
+type has a set of applicable codes to be used in generating events. See the
+Codes section for details on valid codes for each type.
* EV_SYN:
- Used as markers to separate events. Events may be separated in time or in
* EV_FF_STATUS:
- Used to receive force feedback device status.
-Codes:
-==========
-Codes define the precise type of event.
+Event codes:
+===========
+Event codes define the precise type of event.
EV_SYN:
----------
EV_PWR events are a special type of event used specifically for power
mangement. Its usage is not well defined. To be addressed later.
+Device properties:
+=================
+Normally, userspace sets up an input device based on the data it emits,
+i.e., the event types. In the case of two devices emitting the same event
+types, additional information can be provided in the form of device
+properties.
+
+INPUT_PROP_DIRECT + INPUT_PROP_POINTER:
+--------------------------------------
+The INPUT_PROP_DIRECT property indicates that device coordinates should be
+directly mapped to screen coordinates (not taking into account trivial
+transformations, such as scaling, flipping and rotating). Non-direct input
+devices require non-trivial transformation, such as absolute to relative
+transformation for touchpads. Typical direct input devices: touchscreens,
+drawing tablets; non-direct devices: touchpads, mice.
+
+The INPUT_PROP_POINTER property indicates that the device is not transposed
+on the screen and thus requires use of an on-screen pointer to trace user's
+movements. Typical pointer devices: touchpads, tablets, mice; non-pointer
+device: touchscreen.
+
+If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is
+considered undefined and the device type should be deduced in the
+traditional way, using emitted event types.
+
+INPUT_PROP_BUTTONPAD:
+--------------------
+For touchpads where the button is placed beneath the surface, such that
+pressing down on the pad causes a button click, this property should be
+set. Common in clickpad notebooks and macbooks from 2009 and onwards.
+
+Originally, the buttonpad property was coded into the bcm5974 driver
+version field under the name integrated button. For backwards
+compatibility, both methods need to be checked in userspace.
+
+INPUT_PROP_SEMI_MT:
+------------------
+Some touchpads, most common between 2008 and 2011, can detect the presence
+of multiple contacts without resolving the individual positions; only the
+number of contacts and a rectangular shape is known. For such
+touchpads, the semi-mt property should be set.
+
+Depending on the device, the rectangle may enclose all touches, like a
+bounding box, or just some of them, for instance the two most recent
+touches. The diversity makes the rectangle of limited use, but some
+gestures can normally be extracted from it.
+
+If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT
+device.
+
Guidelines:
==========
The guidelines below ensure proper single-touch and multi-finger functionality.
BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch
contact. BTN_TOOL_<name> events should be reported where possible.
+For new hardware, INPUT_PROP_DIRECT should be set.
+
Trackpads:
----------
Legacy trackpads that only provide relative position information must report
on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should
be used to report the number of touches active on the trackpad.
+For new hardware, INPUT_PROP_POINTER should be set.
+
Tablets:
----------
BTN_TOOL_<name> events must be reported when a stylus or other tool is active on
BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use
meaningful buttons, like BTN_FORWARD, unless the button is labeled for that
purpose on the device.
+
+For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set.
instead of using the one provided by the hardware.
512 - A kernel warning has occurred.
1024 - A module from drivers/staging was loaded.
+2048 - The system is working around a severe firmware bug.
+4096 - An out-of-tree module has been loaded.
==============================================================
F: drivers/platform/x86/wmi.c
AD1889 ALSA SOUND DRIVER
-M: Kyle McMartin <kyle@mcmartin.ca>
M: Thibaut Varene <T-Bone@parisc-linux.org>
W: http://wiki.parisc-linux.org/AD1889
L: linux-parisc@vger.kernel.org
F: arch/arm/mach-imx/
F: arch/arm/plat-mxc/
-ARM/FREESCALE IMX51
-M: Amit Kucheria <amit.kucheria@canonical.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-mx5/
-
ARM/FREESCALE IMX6
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: include/linux/atm*
ATMEL AT91 MCI DRIVER
-M: Nicolas Ferre <nicolas.ferre@atmel.com>
+M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.atmel.com/products/AT91/
W: http://www.at91.com/
F: drivers/mmc/host/at91_mci.c
ATMEL AT91 / AT32 MCI DRIVER
-M: Nicolas Ferre <nicolas.ferre@atmel.com>
+M: Ludovic Desroches <ludovic.desroches@atmel.com>
S: Maintained
F: drivers/mmc/host/atmel-mci.c
F: drivers/mmc/host/atmel-mci-regs.h
DOCUMENTATION
M: Randy Dunlap <rdunlap@xenotime.net>
L: linux-doc@vger.kernel.org
-T: quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/
+T: quilt http://xenotime.net/kernel-doc-patches/current/
S: Maintained
F: Documentation/
F: include/linux/hwspinlock.h
HARMONY SOUND DRIVER
-M: Kyle McMartin <kyle@mcmartin.ca>
L: linux-parisc@vger.kernel.org
S: Maintained
F: sound/parisc/harmony.*
F: net/ieee802154/
F: drivers/ieee802154/
+IIO SUBSYSTEM AND DRIVERS
+M: Jonathan Cameron <jic23@cam.ac.uk>
+L: linux-iio@vger.kernel.org
+S: Maintained
+F: drivers/staging/iio/
+
IKANOS/ADI EAGLE ADSL USB DRIVER
M: Matthieu Castet <castet.matthieu@free.fr>
M: Stanislaw Gruszka <stf_xl@wp.pl>
KERNEL AUTOMOUNTER v4 (AUTOFS4)
M: Ian Kent <raven@themaw.net>
-L: autofs@linux.kernel.org
+L: autofs@vger.kernel.org
S: Maintained
F: fs/autofs4/
L: lguest@lists.ozlabs.org
W: http://lguest.ozlabs.org/
S: Odd Fixes
-F: Documentation/virtual/lguest/
+F: arch/x86/include/asm/lguest*.h
F: arch/x86/lguest/
F: drivers/lguest/
F: include/linux/lguest*.h
-F: arch/x86/include/asm/lguest*.h
+F: tools/lguest/
LINUX FOR IBM pSERIES (RS/6000)
M: Paul Mackerras <paulus@au.ibm.com>
W: http://www.linux-ntfs.org/content/view/19/37/
S: Maintained
F: Documentation/ldm.txt
-F: fs/partitions/ldm.*
+F: block/partitions/ldm.*
LogFS
M: Joern Engel <joern@logfs.org>
M: Anton Altaparmakov <anton@tuxera.com>
L: linux-ntfs-dev@lists.sourceforge.net
W: http://www.tuxera.com/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs.git
S: Supported
F: Documentation/filesystems/ntfs.txt
F: fs/ntfs/
F: drivers/block/paride/
PARISC ARCHITECTURE
-M: Kyle McMartin <kyle@mcmartin.ca>
-M: Helge Deller <deller@gmx.de>
M: "James E.J. Bottomley" <jejb@parisc-linux.org>
+M: Helge Deller <deller@gmx.de>
L: linux-parisc@vger.kernel.org
W: http://www.parisc-linux.org/
Q: http://patchwork.kernel.org/project/linux-parisc/list/
S: Supported
F: arch/s390/
F: drivers/s390/
-F: fs/partitions/ibm.c
+F: block/partitions/ibm.c
F: Documentation/s390/
F: Documentation/DocBook/s390*
F: drivers/mmc/host/sdhci-spear.c
SECURITY SUBSYSTEM
-M: James Morris <jmorris@namei.org>
+M: James Morris <james.l.morris@oracle.com>
L: linux-security-module@vger.kernel.org (suggested Cc:)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
W: http://security.wiki.kernel.org/
SELINUX SECURITY MODULE
M: Stephen Smalley <sds@tycho.nsa.gov>
-M: James Morris <jmorris@namei.org>
+M: James Morris <james.l.morris@oracle.com>
M: Eric Paris <eparis@parisplace.org>
L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://selinuxproject.org
S: Odd Fixes
F: drivers/staging/tidspbridge/
-STAGING - TRIDENT TVMASTER TMxxxx USB VIDEO CAPTURE DRIVERS
-L: linux-media@vger.kernel.org
-S: Odd Fixes
-F: drivers/staging/tm6000/
-
STAGING - USB ENE SM/MS CARD READER DRIVER
M: Al Cho <acho@novell.com>
S: Odd Fixes
M: Wim Van Sebroeck <wim@iguana.be>
L: linux-watchdog@vger.kernel.org
W: http://www.linux-watchdog.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
+T: git git://www.linux-watchdog.org/linux-watchdog.git
S: Maintained
F: Documentation/watchdog/
F: drivers/watchdog/
VERSION = 3
PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc6
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
+ cpu-offset = <0x8000>;
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
};
};
serial@70006200 {
- status = "disable";
+ clock-frequency = <216000000>;
};
serial@70006300 {
- clock-frequency = <216000000>;
+ status = "disable";
};
serial@70006400 {
sdhci@c8000000 {
cd-gpios = <&gpio 173 0>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ power-gpios = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000200 {
return -EBUSY;
}
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
/* ITE bridge requires setting latency timer to avoid early bus access
termination by PCI bus master devices
*/
struct pl330_thread *thrd = ch_id;
struct pl330_dmac *pl330;
unsigned long flags;
- int ret = 0, active = thrd->req_running;
+ int ret = 0, active;
if (!thrd || thrd->free || thrd->dmac->state == DYING)
return -EINVAL;
pl330 = thrd->dmac;
+ active = thrd->req_running;
spin_lock_irqsave(&pl330->lock, flags);
disable_irq
.endm
+ .macro save_and_disable_irqs_notrace, oldcpsr
+ mrs \oldcpsr, cpsr
+ disable_irq_notrace
+ .endm
+
/*
* Restore interrupt state previously stored in a register. We don't
* guarantee that this will preserve the flags.
DCCTRL1, /* Bufferable only */
DCCTRL2, /* Cacheable, but do not allocate */
DCCTRL3, /* Cacheable and bufferable, but do not allocate */
- DINVALID1 = 8,
+ DINVALID1, /* AWCACHE = 0x1000 */
DINVALID2,
DCCTRL6, /* Cacheable write-through, allocate on writes only */
DCCTRL7, /* Cacheable write-back, allocate on writes only */
#include <asm/hw_breakpoint.h>
#include <asm/ptrace.h>
#include <asm/types.h>
+#include <asm/system.h>
#ifdef __KERNEL__
#define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \
unsigned long addr)
{
pgtable_page_dtor(pte);
- tlb_add_flush(tlb, addr);
+
+ /*
+ * With the classic ARM MMU, a pte page has two corresponding pmd
+ * entries, each covering 1MB.
+ */
+ addr &= PMD_MASK;
+ tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
+ tlb_add_flush(tlb, addr + SZ_1M);
+
tlb_remove_page(tlb, pte);
}
smp_dmb arm
rsbs r0, r3, #0 @ set returned val and C flag
ldmfd sp!, {r4, r5, r6, r7}
- bx lr
+ usr_ret lr
#elif !defined(CONFIG_SMP)
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
+ [C(NODE)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
};
/*
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
+ [C(NODE)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
};
/*
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/regset.h>
+#include <linux/audit.h>
#include <asm/pgtable.h>
#include <asm/system.h>
{
int ret;
struct thread_info *thread = task_thread_info(target);
- struct vfp_hard_struct new_vfp = thread->vfpstate.hard;
+ struct vfp_hard_struct new_vfp;
const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);
+ vfp_sync_hwstate(thread);
+ new_vfp = thread->vfpstate.hard;
+
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&new_vfp.fpregs,
user_fpregs_offset,
if (ret)
return ret;
- vfp_sync_hwstate(thread);
- thread->vfpstate.hard = new_vfp;
vfp_flush_hwstate(thread);
+ thread->vfpstate.hard = new_vfp;
return 0;
}
return ret;
}
+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
{
unsigned long ip;
if (!ip)
audit_syscall_exit(regs);
else
- audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
+ audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
if (!test_thread_flag(TIF_SYSCALL_TRACE))
if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
return -EINVAL;
+ vfp_flush_hwstate(thread);
+
/*
* Copy the floating point registers. There can be unused
* registers see asm/hwcap.h for details.
__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
- if (!err)
- vfp_flush_hwstate(thread);
-
return err ? -EFAULT : 0;
}
static int twd_cpufreq_init(void)
{
- if (!IS_ERR(twd_clk))
+ if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
return cpufreq_register_notifier(&twd_cpufreq_nb,
CPUFREQ_TRANSITION_NOTIFIER);
{
struct thread_info *thread = current_thread_info();
int ret;
+ enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE;
oops_enter();
console_verbose();
bust_spinlocks(1);
if (!user_mode(regs))
- report_bug(regs->ARM_pc, regs);
+ bug_type = report_bug(regs->ARM_pc, regs);
+ if (bug_type != BUG_TRAP_TYPE_NONE)
+ str = "Oops - BUG";
ret = __die(str, err, thread, regs);
if (regs && kexec_should_crash(thread->task))
#include <asm/page.h>
#define PROC_INFO \
+ . = ALIGN(4); \
VMLINUX_SYMBOL(__proc_info_begin) = .; \
*(.proc.info.init) \
VMLINUX_SYMBOL(__proc_info_end) = .;
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
* CF/IDE
* -------------------------------------------------------------------- */
-#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
- defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf0_data;
if (data->flags & AT91_CF_TRUE_IDE)
#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
pdev->name = "pata_at91";
-#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
- pdev->name = "at91_ide";
#else
-#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
#endif
else
pdev->name = "at91_cf";
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
* Compact Flash (PCMCIA or IDE)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
- defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf0_data;
at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */
at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
- pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+ pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
platform_device_register(pdev);
}
#else
#include <mach/cpu.h>
+#ifndef __ASSEMBLY__
+struct sam9_smc_config {
+ /* Setup register */
+ u8 ncs_read_setup;
+ u8 nrd_setup;
+ u8 ncs_write_setup;
+ u8 nwe_setup;
+
+ /* Pulse register */
+ u8 ncs_read_pulse;
+ u8 nrd_pulse;
+ u8 ncs_write_pulse;
+ u8 nwe_pulse;
+
+ /* Cycle register */
+ u16 read_cycle;
+ u16 write_cycle;
+
+ /* Mode register */
+ u32 mode;
+ u8 tdf_cycles:4;
+};
+
+extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
+#endif
+
#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */
#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
#define AT91_SMC_NWESETUP_(x) ((x) << 0)
* linux/arch/arm/mach-at91/sam9_smc.c
*
* Copyright (C) 2008 Andrew Victor
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
static void __iomem *smc_base_addr[2];
-static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config)
+static void sam9_smc_cs_write_mode(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ __raw_writel(config->mode
+ | AT91_SMC_TDF_(config->tdf_cycles),
+ base + AT91_SMC_MODE);
+}
+
+void sam9_smc_write_mode(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_configure(void __iomem *base,
+ struct sam9_smc_config *config)
{
/* Setup register */
base + AT91_SMC_CYCLE);
/* Mode register */
- __raw_writel(config->mode
- | AT91_SMC_TDF_(config->tdf_cycles),
- base + AT91_SMC_MODE);
+ sam9_smc_cs_write_mode(base, config);
}
-void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config)
+void sam9_smc_configure(int id, int cs,
+ struct sam9_smc_config *config)
{
sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
}
+static void sam9_smc_cs_read_mode(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ u32 val = __raw_readl(base + AT91_SMC_MODE);
+
+ config->mode = (val & ~AT91_SMC_NWECYCLE);
+ config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
+}
+
+void sam9_smc_read_mode(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_read(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ u32 val;
+
+ /* Setup register */
+ val = __raw_readl(base + AT91_SMC_SETUP);
+
+ config->nwe_setup = val & AT91_SMC_NWESETUP;
+ config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
+ config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
+ config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
+
+ /* Pulse register */
+ val = __raw_readl(base + AT91_SMC_PULSE);
+
+ config->nwe_setup = val & AT91_SMC_NWEPULSE;
+ config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
+ config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
+ config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
+
+ /* Cycle register */
+ val = __raw_readl(base + AT91_SMC_CYCLE);
+
+ config->write_cycle = val & AT91_SMC_NWECYCLE;
+ config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
+
+ /* Mode register */
+ sam9_smc_cs_read_mode(base, config);
+}
+
+void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
+{
+ sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
+}
+
void __init at91sam9_ioremap_smc(int id, u32 addr)
{
if (id > 1) {
* published by the Free Software Foundation.
*/
-struct sam9_smc_config {
- /* Setup register */
- u8 ncs_read_setup;
- u8 nrd_setup;
- u8 ncs_write_setup;
- u8 nwe_setup;
-
- /* Pulse register */
- u8 ncs_read_pulse;
- u8 nrd_pulse;
- u8 ncs_write_pulse;
- u8 nwe_pulse;
-
- /* Cycle register */
- u16 read_cycle;
- u16 write_cycle;
-
- /* Mode register */
- u32 mode;
- u8 tdf_cycles:4;
-};
-
-extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config);
extern void __init at91sam9_ioremap_smc(int id, u32 addr);
.init_early = bcmring_init_early,
.init_irq = bcmring_init_irq,
.timer = &bcmring_timer,
- .init_machine = bcmring_init_machine
+ .init_machine = bcmring_init_machine,
.restart = bcmring_restart,
MACHINE_END
#include <mach/timer.h>
-#include <linux/mm.h>
#include <linux/pfn.h>
#include <linux/atomic.h>
#include <linux/sched.h>
#include <mach/dma.h>
-/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
-/* especially since dc4 doesn't use kmalloc'd memory. */
-
-#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
-
/* ---- Public Variables ------------------------------------------------- */
/* ---- Private Constants and Types -------------------------------------- */
#define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f)
#define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f)
-#define DMA_MAP_DEBUG 0
-
-#if DMA_MAP_DEBUG
-# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args)
-#else
-# define DMA_MAP_PRINT(fmt, args...)
-#endif
/* ---- Private Variables ------------------------------------------------ */
static DMA_Global_t gDMA;
static struct proc_dir_entry *gDmaDir;
-static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
-
#include "dma_device.c"
/* ---- Private Function Prototypes -------------------------------------- */
/* ---- Functions ------------------------------------------------------- */
-/****************************************************************************/
-/**
-* Displays information for /proc/dma/mem-type
-*/
-/****************************************************************************/
-
-static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- int len = 0;
-
- len += sprintf(buf + len, "dma_map_mem statistics\n");
- len +=
- sprintf(buf + len, "coherent: %d\n",
- atomic_read(&gDmaStatMemTypeCoherent));
- len +=
- sprintf(buf + len, "kmalloc: %d\n",
- atomic_read(&gDmaStatMemTypeKmalloc));
- len +=
- sprintf(buf + len, "vmalloc: %d\n",
- atomic_read(&gDmaStatMemTypeVmalloc));
- len +=
- sprintf(buf + len, "user: %d\n",
- atomic_read(&gDmaStatMemTypeUser));
-
- return len;
-}
-
/****************************************************************************/
/**
* Displays information for /proc/dma/channels
dma_proc_read_channels, NULL);
create_proc_read_entry("devices", 0, gDmaDir,
dma_proc_read_devices, NULL);
- create_proc_read_entry("mem-type", 0, gDmaDir,
- dma_proc_read_mem_type, NULL);
}
out:
}
EXPORT_SYMBOL(dma_set_device_handler);
-
-/****************************************************************************/
-/**
-* Initializes a memory mapping structure
-*/
-/****************************************************************************/
-
-int dma_init_mem_map(DMA_MemMap_t *memMap)
-{
- memset(memMap, 0, sizeof(*memMap));
-
- sema_init(&memMap->lock, 1);
-
- return 0;
-}
-
-EXPORT_SYMBOL(dma_init_mem_map);
-
-/****************************************************************************/
-/**
-* Releases any memory currently being held by a memory mapping structure.
-*/
-/****************************************************************************/
-
-int dma_term_mem_map(DMA_MemMap_t *memMap)
-{
- down(&memMap->lock); /* Just being paranoid */
-
- /* Free up any allocated memory */
-
- up(&memMap->lock);
- memset(memMap, 0, sizeof(*memMap));
-
- return 0;
-}
-
-EXPORT_SYMBOL(dma_term_mem_map);
-
-/****************************************************************************/
-/**
-* Looks at a memory address and categorizes it.
-*
-* @return One of the values from the DMA_MemType_t enumeration.
-*/
-/****************************************************************************/
-
-DMA_MemType_t dma_mem_type(void *addr)
-{
- unsigned long addrVal = (unsigned long)addr;
-
- if (addrVal >= CONSISTENT_BASE) {
- /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
-
- /* dma_alloc_xxx pages are physically and virtually contiguous */
-
- return DMA_MEM_TYPE_DMA;
- }
-
- /* Technically, we could add one more classification. Addresses between VMALLOC_END */
- /* and the beginning of the DMA virtual address could be considered to be I/O space. */
- /* Right now, nobody cares about this particular classification, so we ignore it. */
-
- if (is_vmalloc_addr(addr)) {
- /* Address comes from the vmalloc'd region. Pages are virtually */
- /* contiguous but NOT physically contiguous */
-
- return DMA_MEM_TYPE_VMALLOC;
- }
-
- if (addrVal >= PAGE_OFFSET) {
- /* PAGE_OFFSET is typically 0xC0000000 */
-
- /* kmalloc'd pages are physically contiguous */
-
- return DMA_MEM_TYPE_KMALLOC;
- }
-
- return DMA_MEM_TYPE_USER;
-}
-
-EXPORT_SYMBOL(dma_mem_type);
-
-/****************************************************************************/
-/**
-* Looks at a memory address and determines if we support DMA'ing to/from
-* that type of memory.
-*
-* @return boolean -
-* return value != 0 means dma supported
-* return value == 0 means dma not supported
-*/
-/****************************************************************************/
-
-int dma_mem_supports_dma(void *addr)
-{
- DMA_MemType_t memType = dma_mem_type(addr);
-
- return (memType == DMA_MEM_TYPE_DMA)
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
- || (memType == DMA_MEM_TYPE_KMALLOC)
-#endif
- || (memType == DMA_MEM_TYPE_USER);
-}
-
-EXPORT_SYMBOL(dma_mem_supports_dma);
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- ) {
- int rc;
-
- down(&memMap->lock);
-
- DMA_MAP_PRINT("memMap: %p\n", memMap);
-
- if (memMap->inUse) {
- printk(KERN_ERR "%s: memory map %p is already being used\n",
- __func__, memMap);
- rc = -EBUSY;
- goto out;
- }
-
- memMap->inUse = 1;
- memMap->dir = dir;
- memMap->numRegionsUsed = 0;
-
- rc = 0;
-
-out:
-
- DMA_MAP_PRINT("returning %d", rc);
-
- up(&memMap->lock);
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_start);
-
-/****************************************************************************/
-/**
-* Adds a segment of memory to a memory map. Each segment is both
-* physically and virtually contiguous.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */
- DMA_Region_t *region, /* Region that the segment belongs to */
- void *virtAddr, /* Virtual address of the segment being added */
- dma_addr_t physAddr, /* Physical address of the segment being added */
- size_t numBytes /* Number of bytes of the segment being added */
- ) {
- DMA_Segment_t *segment;
-
- DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
- physAddr, numBytes);
-
- /* Sanity check */
-
- if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
- || (((unsigned long)virtAddr + numBytes)) >
- ((unsigned long)region->virtAddr + region->numBytes)) {
- printk(KERN_ERR
- "%s: virtAddr %p is outside region @ %p len: %d\n",
- __func__, virtAddr, region->virtAddr, region->numBytes);
- return -EINVAL;
- }
-
- if (region->numSegmentsUsed > 0) {
- /* Check to see if this segment is physically contiguous with the previous one */
-
- segment = ®ion->segment[region->numSegmentsUsed - 1];
-
- if ((segment->physAddr + segment->numBytes) == physAddr) {
- /* It is - just add on to the end */
-
- DMA_MAP_PRINT("appending %d bytes to last segment\n",
- numBytes);
-
- segment->numBytes += numBytes;
-
- return 0;
- }
- }
-
- /* Reallocate to hold more segments, if required. */
-
- if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
- DMA_Segment_t *newSegment;
- size_t oldSize =
- region->numSegmentsAllocated * sizeof(*newSegment);
- int newAlloc = region->numSegmentsAllocated + 4;
- size_t newSize = newAlloc * sizeof(*newSegment);
-
- newSegment = kmalloc(newSize, GFP_KERNEL);
- if (newSegment == NULL) {
- return -ENOMEM;
- }
- memcpy(newSegment, region->segment, oldSize);
- memset(&((uint8_t *) newSegment)[oldSize], 0,
- newSize - oldSize);
- kfree(region->segment);
-
- region->numSegmentsAllocated = newAlloc;
- region->segment = newSegment;
- }
-
- segment = ®ion->segment[region->numSegmentsUsed];
- region->numSegmentsUsed++;
-
- segment->virtAddr = virtAddr;
- segment->physAddr = physAddr;
- segment->numBytes = numBytes;
-
- DMA_MAP_PRINT("returning success\n");
-
- return 0;
-}
-
-/****************************************************************************/
-/**
-* Adds a region of memory to a memory map. Each region is virtually
-* contiguous, but not necessarily physically contiguous.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *mem, /* Virtual address that we want to get a map of */
- size_t numBytes /* Number of bytes being mapped */
- ) {
- unsigned long addr = (unsigned long)mem;
- unsigned int offset;
- int rc = 0;
- DMA_Region_t *region;
- dma_addr_t physAddr;
-
- down(&memMap->lock);
-
- DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
-
- if (!memMap->inUse) {
- printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
- __func__);
- rc = -EINVAL;
- goto out;
- }
-
- /* Reallocate to hold more regions. */
-
- if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
- DMA_Region_t *newRegion;
- size_t oldSize =
- memMap->numRegionsAllocated * sizeof(*newRegion);
- int newAlloc = memMap->numRegionsAllocated + 4;
- size_t newSize = newAlloc * sizeof(*newRegion);
-
- newRegion = kmalloc(newSize, GFP_KERNEL);
- if (newRegion == NULL) {
- rc = -ENOMEM;
- goto out;
- }
- memcpy(newRegion, memMap->region, oldSize);
- memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
-
- kfree(memMap->region);
-
- memMap->numRegionsAllocated = newAlloc;
- memMap->region = newRegion;
- }
-
- region = &memMap->region[memMap->numRegionsUsed];
- memMap->numRegionsUsed++;
-
- offset = addr & ~PAGE_MASK;
-
- region->memType = dma_mem_type(mem);
- region->virtAddr = mem;
- region->numBytes = numBytes;
- region->numSegmentsUsed = 0;
- region->numLockedPages = 0;
- region->lockedPages = NULL;
-
- switch (region->memType) {
- case DMA_MEM_TYPE_VMALLOC:
- {
- atomic_inc(&gDmaStatMemTypeVmalloc);
-
- /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
-
- /* vmalloc'd pages are not physically contiguous */
-
- rc = -EINVAL;
- break;
- }
-
- case DMA_MEM_TYPE_KMALLOC:
- {
- atomic_inc(&gDmaStatMemTypeKmalloc);
-
- /* kmalloc'd pages are physically contiguous, so they'll have exactly */
- /* one segment */
-
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
- physAddr =
- dma_map_single(NULL, mem, numBytes, memMap->dir);
- rc = dma_map_add_segment(memMap, region, mem, physAddr,
- numBytes);
-#else
- rc = -EINVAL;
-#endif
- break;
- }
-
- case DMA_MEM_TYPE_DMA:
- {
- /* dma_alloc_xxx pages are physically contiguous */
-
- atomic_inc(&gDmaStatMemTypeCoherent);
-
- physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
-
- dma_sync_single_for_cpu(NULL, physAddr, numBytes,
- memMap->dir);
- rc = dma_map_add_segment(memMap, region, mem, physAddr,
- numBytes);
- break;
- }
-
- case DMA_MEM_TYPE_USER:
- {
- size_t firstPageOffset;
- size_t firstPageSize;
- struct page **pages;
- struct task_struct *userTask;
-
- atomic_inc(&gDmaStatMemTypeUser);
-
-#if 1
- /* If the pages are user pages, then the dma_mem_map_set_user_task function */
- /* must have been previously called. */
-
- if (memMap->userTask == NULL) {
- printk(KERN_ERR
- "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
- __func__);
- return -EINVAL;
- }
-
- /* User pages need to be locked. */
-
- firstPageOffset =
- (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
- firstPageSize = PAGE_SIZE - firstPageOffset;
-
- region->numLockedPages = (firstPageOffset
- + region->numBytes +
- PAGE_SIZE - 1) / PAGE_SIZE;
- pages =
- kmalloc(region->numLockedPages *
- sizeof(struct page *), GFP_KERNEL);
-
- if (pages == NULL) {
- region->numLockedPages = 0;
- return -ENOMEM;
- }
-
- userTask = memMap->userTask;
-
- down_read(&userTask->mm->mmap_sem);
- rc = get_user_pages(userTask, /* task */
- userTask->mm, /* mm */
- (unsigned long)region->virtAddr, /* start */
- region->numLockedPages, /* len */
- memMap->dir == DMA_FROM_DEVICE, /* write */
- 0, /* force */
- pages, /* pages (array of pointers to page) */
- NULL); /* vmas */
- up_read(&userTask->mm->mmap_sem);
-
- if (rc != region->numLockedPages) {
- kfree(pages);
- region->numLockedPages = 0;
-
- if (rc >= 0) {
- rc = -EINVAL;
- }
- } else {
- uint8_t *virtAddr = region->virtAddr;
- size_t bytesRemaining;
- int pageIdx;
-
- rc = 0; /* Since get_user_pages returns +ve number */
-
- region->lockedPages = pages;
-
- /* We've locked the user pages. Now we need to walk them and figure */
- /* out the physical addresses. */
-
- /* The first page may be partial */
-
- dma_map_add_segment(memMap,
- region,
- virtAddr,
- PFN_PHYS(page_to_pfn
- (pages[0])) +
- firstPageOffset,
- firstPageSize);
-
- virtAddr += firstPageSize;
- bytesRemaining =
- region->numBytes - firstPageSize;
-
- for (pageIdx = 1;
- pageIdx < region->numLockedPages;
- pageIdx++) {
- size_t bytesThisPage =
- (bytesRemaining >
- PAGE_SIZE ? PAGE_SIZE :
- bytesRemaining);
-
- DMA_MAP_PRINT
- ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
- pageIdx, pages[pageIdx],
- page_to_pfn(pages[pageIdx]),
- PFN_PHYS(page_to_pfn
- (pages[pageIdx])));
-
- dma_map_add_segment(memMap,
- region,
- virtAddr,
- PFN_PHYS(page_to_pfn
- (pages
- [pageIdx])),
- bytesThisPage);
-
- virtAddr += bytesThisPage;
- bytesRemaining -= bytesThisPage;
- }
- }
-#else
- printk(KERN_ERR
- "%s: User mode pages are not yet supported\n",
- __func__);
-
- /* user pages are not physically contiguous */
-
- rc = -EINVAL;
-#endif
- break;
- }
-
- default:
- {
- printk(KERN_ERR "%s: Unsupported memory type: %d\n",
- __func__, region->memType);
-
- rc = -EINVAL;
- break;
- }
- }
-
- if (rc != 0) {
- memMap->numRegionsUsed--;
- }
-
-out:
-
- DMA_MAP_PRINT("returning %d\n", rc);
-
- up(&memMap->lock);
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_add_segment);
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *mem, /* Virtual address that we want to get a map of */
- size_t numBytes, /* Number of bytes being mapped */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- ) {
- int rc;
-
- rc = dma_map_start(memMap, dir);
- if (rc == 0) {
- rc = dma_map_add_region(memMap, mem, numBytes);
- if (rc < 0) {
- /* Since the add fails, this function will fail, and the caller won't */
- /* call unmap, so we need to do it here. */
-
- dma_unmap(memMap, 0);
- }
- }
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_mem);
-
-/****************************************************************************/
-/**
-* Setup a descriptor ring for a given memory map.
-*
-* It is assumed that the descriptor ring has already been initialized, and
-* this routine will only reallocate a new descriptor ring if the existing
-* one is too small.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
- DMA_MemMap_t *memMap, /* Memory map that will be used */
- dma_addr_t devPhysAddr /* Physical address of device */
- ) {
- int rc;
- int numDescriptors;
- DMA_DeviceAttribute_t *devAttr;
- DMA_Region_t *region;
- DMA_Segment_t *segment;
- dma_addr_t srcPhysAddr;
- dma_addr_t dstPhysAddr;
- int regionIdx;
- int segmentIdx;
-
- devAttr = &DMA_gDeviceAttribute[dev];
-
- down(&memMap->lock);
-
- /* Figure out how many descriptors we need */
-
- numDescriptors = 0;
- for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
- region = &memMap->region[regionIdx];
-
- for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
- segmentIdx++) {
- segment = ®ion->segment[segmentIdx];
-
- if (memMap->dir == DMA_TO_DEVICE) {
- srcPhysAddr = segment->physAddr;
- dstPhysAddr = devPhysAddr;
- } else {
- srcPhysAddr = devPhysAddr;
- dstPhysAddr = segment->physAddr;
- }
-
- rc =
- dma_calculate_descriptor_count(dev, srcPhysAddr,
- dstPhysAddr,
- segment->
- numBytes);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_calculate_descriptor_count failed: %d\n",
- __func__, rc);
- goto out;
- }
- numDescriptors += rc;
- }
- }
-
- /* Adjust the size of the ring, if it isn't big enough */
-
- if (numDescriptors > devAttr->ring.descriptorsAllocated) {
- dma_free_descriptor_ring(&devAttr->ring);
- rc =
- dma_alloc_descriptor_ring(&devAttr->ring,
- numDescriptors);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_alloc_descriptor_ring failed: %d\n",
- __func__, rc);
- goto out;
- }
- } else {
- rc =
- dma_init_descriptor_ring(&devAttr->ring,
- numDescriptors);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_init_descriptor_ring failed: %d\n",
- __func__, rc);
- goto out;
- }
- }
-
- /* Populate the descriptors */
-
- for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
- region = &memMap->region[regionIdx];
-
- for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
- segmentIdx++) {
- segment = ®ion->segment[segmentIdx];
-
- if (memMap->dir == DMA_TO_DEVICE) {
- srcPhysAddr = segment->physAddr;
- dstPhysAddr = devPhysAddr;
- } else {
- srcPhysAddr = devPhysAddr;
- dstPhysAddr = segment->physAddr;
- }
-
- rc =
- dma_add_descriptors(&devAttr->ring, dev,
- srcPhysAddr, dstPhysAddr,
- segment->numBytes);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_add_descriptors failed: %d\n",
- __func__, rc);
- goto out;
- }
- }
- }
-
- rc = 0;
-
-out:
-
- up(&memMap->lock);
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_create_descriptor_ring);
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
- int dirtied /* non-zero if any of the pages were modified */
- ) {
-
- int rc = 0;
- int regionIdx;
- int segmentIdx;
- DMA_Region_t *region;
- DMA_Segment_t *segment;
-
- down(&memMap->lock);
-
- for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
- region = &memMap->region[regionIdx];
-
- for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
- segmentIdx++) {
- segment = ®ion->segment[segmentIdx];
-
- switch (region->memType) {
- case DMA_MEM_TYPE_VMALLOC:
- {
- printk(KERN_ERR
- "%s: vmalloc'd pages are not yet supported\n",
- __func__);
- rc = -EINVAL;
- goto out;
- }
-
- case DMA_MEM_TYPE_KMALLOC:
- {
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
- dma_unmap_single(NULL,
- segment->physAddr,
- segment->numBytes,
- memMap->dir);
-#endif
- break;
- }
-
- case DMA_MEM_TYPE_DMA:
- {
- dma_sync_single_for_cpu(NULL,
- segment->
- physAddr,
- segment->
- numBytes,
- memMap->dir);
- break;
- }
-
- case DMA_MEM_TYPE_USER:
- {
- /* Nothing to do here. */
-
- break;
- }
-
- default:
- {
- printk(KERN_ERR
- "%s: Unsupported memory type: %d\n",
- __func__, region->memType);
- rc = -EINVAL;
- goto out;
- }
- }
-
- segment->virtAddr = NULL;
- segment->physAddr = 0;
- segment->numBytes = 0;
- }
-
- if (region->numLockedPages > 0) {
- int pageIdx;
-
- /* Some user pages were locked. We need to go and unlock them now. */
-
- for (pageIdx = 0; pageIdx < region->numLockedPages;
- pageIdx++) {
- struct page *page =
- region->lockedPages[pageIdx];
-
- if (memMap->dir == DMA_FROM_DEVICE) {
- SetPageDirty(page);
- }
- page_cache_release(page);
- }
- kfree(region->lockedPages);
- region->numLockedPages = 0;
- region->lockedPages = NULL;
- }
-
- region->memType = DMA_MEM_TYPE_NONE;
- region->virtAddr = NULL;
- region->numBytes = 0;
- region->numSegmentsUsed = 0;
- }
- memMap->userTask = NULL;
- memMap->numRegionsUsed = 0;
- memMap->inUse = 0;
-
-out:
- up(&memMap->lock);
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_unmap);
/* ---- Include Files ---------------------------------------------------- */
#include <linux/kernel.h>
-#include <linux/wait.h>
#include <linux/semaphore.h>
#include <csp/dmacHw.h>
#include <mach/timer.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-mapping.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
/* ---- Constants and Types ---------------------------------------------- */
} DMA_DescriptorRing_t;
-/****************************************************************************
-*
-* The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
-* DMA chains from a variety of memory sources.
-*
-*****************************************************************************/
-
-#define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */
- /* off not being DMA'd. */
-
-typedef enum {
- DMA_MEM_TYPE_NONE, /* Not a valid setting */
- DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */
- DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */
- DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */
- DMA_MEM_TYPE_USER, /* Memory came from user space. */
-
-} DMA_MemType_t;
-
-/* A segment represents a physically and virtually contiguous chunk of memory. */
-/* i.e. each segment can be DMA'd */
-/* A user of the DMA code will add memory regions. Each region may need to be */
-/* represented by one or more segments. */
-
-typedef struct {
- void *virtAddr; /* Virtual address used for this segment */
- dma_addr_t physAddr; /* Physical address this segment maps to */
- size_t numBytes; /* Size of the segment, in bytes */
-
-} DMA_Segment_t;
-
-/* A region represents a virtually contiguous chunk of memory, which may be */
-/* made up of multiple segments. */
-
-typedef struct {
- DMA_MemType_t memType;
- void *virtAddr;
- size_t numBytes;
-
- /* Each region (virtually contiguous) consists of one or more segments. Each */
- /* segment is virtually and physically contiguous. */
-
- int numSegmentsUsed;
- int numSegmentsAllocated;
- DMA_Segment_t *segment;
-
- /* When a region corresponds to user memory, we need to lock all of the pages */
- /* down before we can figure out the physical addresses. The lockedPage array contains */
- /* the pages that were locked, and which subsequently need to be unlocked once the */
- /* memory is unmapped. */
-
- unsigned numLockedPages;
- struct page **lockedPages;
-
-} DMA_Region_t;
-
-typedef struct {
- int inUse; /* Is this mapping currently being used? */
- struct semaphore lock; /* Acquired when using this structure */
- enum dma_data_direction dir; /* Direction this transfer is intended for */
-
- /* In the event that we're mapping user memory, we need to know which task */
- /* the memory is for, so that we can obtain the correct mm locks. */
-
- struct task_struct *userTask;
-
- int numRegionsUsed;
- int numRegionsAllocated;
- DMA_Region_t *region;
-
-} DMA_MemMap_t;
-
/****************************************************************************
*
* The DMA_DeviceAttribute_t contains information which describes a
size_t numBytes /* Number of bytes in each destination buffer */
);
-/****************************************************************************/
-/**
-* Initializes a DMA_MemMap_t data structure
-*/
-/****************************************************************************/
-
-int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
- );
-
-/****************************************************************************/
-/**
-* Releases any memory currently being held by a memory mapping structure.
-*/
-/****************************************************************************/
-
-int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
- );
-
-/****************************************************************************/
-/**
-* Looks at a memory address and categorizes it.
-*
-* @return One of the values from the DMA_MemType_t enumeration.
-*/
-/****************************************************************************/
-
-DMA_MemType_t dma_mem_type(void *addr);
-
-/****************************************************************************/
-/**
-* Sets the process (aka userTask) associated with a mem map. This is
-* required if user-mode segments will be added to the mapping.
-*/
-/****************************************************************************/
-
-static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
- struct task_struct *task)
-{
- memMap->userTask = task;
-}
-
-/****************************************************************************/
-/**
-* Looks at a memory address and determines if we support DMA'ing to/from
-* that type of memory.
-*
-* @return boolean -
-* return value != 0 means dma supported
-* return value == 0 means dma not supported
-*/
-/****************************************************************************/
-
-int dma_mem_supports_dma(void *addr);
-
-/****************************************************************************/
-/**
-* Initializes a memory map for use. Since this function acquires a
-* sempaphore within the memory map, it is VERY important that dma_unmap
-* be called when you're finished using the map.
-*/
-/****************************************************************************/
-
-int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- );
-
-/****************************************************************************/
-/**
-* Adds a segment of memory to a memory map.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *mem, /* Virtual address that we want to get a map of */
- size_t numBytes /* Number of bytes being mapped */
- );
-
-/****************************************************************************/
-/**
-* Creates a descriptor ring from a memory mapping.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
- DMA_MemMap_t *memMap, /* Memory map that will be used */
- dma_addr_t devPhysAddr /* Physical address of device */
- );
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *addr, /* Virtual address that we want to get a map of */
- size_t count, /* Number of bytes being mapped */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- );
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
- int dirtied /* non-zero if any of the pages were modified */
- );
-
/****************************************************************************/
/**
* Initiates a transfer when the descriptors have already been setup.
#include <mach/aemif.h>
#include <mach/spi.h>
-#define DA850_EVM_PHY_ID "0:00"
+#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
return 0;
}
-#define DM365_EVM_PHY_ID "0:01"
+#define DM365_EVM_PHY_ID "davinci_mdio-0:01"
/*
* A MAX-II CPLD is used for various board control functions.
*/
#include <mach/usb.h>
#include <mach/aemif.h>
-#define DM644X_EVM_PHY_ID "0:01"
+#define DM644X_EVM_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID (0x001378e2)
#define LXT971_PHY_MASK (0xfffffff0)
.enabled_uarts = (1 << 0),
};
-#define DM646X_EVM_PHY_ID "0:01"
+#define DM646X_EVM_PHY_ID "davinci_mdio-0:01"
/*
* The following EDMA channels/slots are not being used by drivers (for
* example: Timer, GPIO, UART events etc) on dm646x, hence they are being
#include <mach/mmc.h>
#include <mach/usb.h>
-#define NEUROS_OSD2_PHY_ID "0:01"
+#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID 0x001378e2
#define LXT971_PHY_MASK 0xfffffff0
#include <mach/da8xx.h>
#include <mach/mux.h>
-#define HAWKBOARD_PHY_ID "0:07"
+#define HAWKBOARD_PHY_ID "davinci_mdio-0:07"
#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)
#include <mach/mux.h>
#include <mach/usb.h>
-#define SFFSDR_PHY_ID "0:01"
+#define SFFSDR_PHY_ID "davinci_mdio-0:01"
static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
/* U-Boot Environment: Block 0
* UBL: Block 1
.div_reg = PLLDIV3,
};
-static struct clk pll1_sysclk4 = {
- .name = "pll1_sysclk4",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV4,
-};
-
-static struct clk pll1_sysclk5 = {
- .name = "pll1_sysclk5",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV5,
-};
-
-static struct clk pll1_sysclk6 = {
- .name = "pll0_sysclk6",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV6,
-};
-
-static struct clk pll1_sysclk7 = {
- .name = "pll1_sysclk7",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV7,
-};
-
static struct clk i2c0_clk = {
.name = "i2c0",
.parent = &pll0_aux_clk,
CLK(NULL, "pll1_aux", &pll1_aux_clk),
CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
- CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
- CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
- CLK(NULL, "pll1_sysclk6", &pll1_sysclk6),
- CLK(NULL, "pll1_sysclk7", &pll1_sysclk7),
CLK("i2c_davinci.1", NULL, &i2c0_clk),
CLK(NULL, "timer0", &timerp64_0_clk),
CLK("watchdog", NULL, &timerp64_1_clk),
#include <asm/mach/arch.h>
#include <linux/irq.h>
#include <plat/time.h>
+#include <plat/ehci-orion.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"
****************************************************************************/
void __init dove_ehci0_init(void)
{
- orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
+ orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA);
}
/*****************************************************************************
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
}, {
I2C_BOARD_INFO("pca9539", 0x74),
.platform_data = &pca953x_74_gpio_data,
- .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
}, {
I2C_BOARD_INFO("pca9539", 0x75),
.platform_data = &pca953x_75_gpio_data,
"pca9539:74"))
pr_warn("cannot request interrupt gpio for pca9539:74\n");
+ vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
+
ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
ARRAY_SIZE(vision_i2c_info));
ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4210_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKSRC_LCD1),
SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
};
+#endif
static struct clksrc_clk *sysclks[] = {
/* nothing here yet */
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4212_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKDIV_IMAGE),
SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
};
+#endif
static struct clk *clk_src_mpll_user_list[] = {
[0] = &clk_fin_mpll,
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4_clock_save[] = {
SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
SAVE_ITEM(S5P_CLKGATE_IP_CPU),
};
+#endif
struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
#include <linux/serial_core.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <mach/map.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
+
+#include "common.h"
/*
* The following lookup table is used to override device names when devices
static void __init exynos4210_dt_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
}
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
.init_irq = exynos4_init_irq,
.map_io = exynos4210_dt_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = exynos4210_dt_machine_init,
.timer = &exynos4_timer,
.dt_compat = exynos4210_dt_compat,
+ .restart = exynos4_restart,
MACHINE_END
.lower_margin = 1,
.hsync_len = 48,
.vsync_len = 3,
- .xres = 1280,
- .yres = 800,
+ .xres = 1024,
+ .yres = 600,
.refresh = 60,
},
.max_bpp = 24,
.default_bpp = 16,
- .virtual_x = 1280,
- .virtual_y = 800,
+ .virtual_x = 1024,
+ .virtual_y = 2 * 600,
};
static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
.bus_type = FIMC_MIPI_CSI2,
.board_info = &m5mols_board_info,
.i2c_bus_num = 0,
- .clk_frequency = 21600000UL,
+ .clk_frequency = 24000000UL,
.csi_data_align = 32,
},
};
}
-static int exynos4_pm_add(struct device *dev)
+static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = exynos4_pm_prepare;
pm_cpu_sleep = exynos4_cpu_suspend;
exynos4_restore_pll();
+#ifdef CONFIG_SMP
scu_enable(S5P_VA_SCU);
+#endif
#ifdef CONFIG_CACHE_L2X0
s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
#include <plat/cache-feroceon-l2.h>
#include <plat/mvsdio.h>
#include <plat/orion_nand.h>
+#include <plat/ehci-orion.h>
#include <plat/common.h>
#include <plat/time.h>
#include <plat/addr-map.h>
void __init kirkwood_ehci_init(void)
{
kirkwood_clk_ctrl |= CGC_USB0;
- orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB);
+ orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
}
#define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 )
#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1, 0 )
+#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 )
#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1, 0 )
+#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 )
#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_TW0_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1, 1 )
-#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_TW0_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1, 0 )
+#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 )
#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP12_TW1_SDA MPP( 12, 0xd, 1, 0, 0, 0, 0, 0, 1 )
+#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 )
#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP13_LCDPWM MPP( 13, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP14_AU_SPDIFI MPP( 14, 0xa, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP14_AU_I2SDI MPP( 14, 0xb, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP17_TW1_SCK MPP( 17, 0xd, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 )
#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 )
#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 )
#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP20_AU_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1, 1 )
-#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP27_AU_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP28_AU_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 )
#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 0, 0, 1, 1 )
+#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 )
#define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 )
#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP36_AU_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1, 1 )
-#define MPP36_TW1_SDA MPP( 36, 0xb, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TW1_SCK MPP( 37, 0xb, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1, 1 )
-#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 )
#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP43_AU_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1, 1 )
+#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 )
#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP44_AU_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1, 1 )
+#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1, 1 )
+#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1, 1 )
+#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 )
#define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1, 0 )
-#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 )
#define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP_MAX 49
*/
#define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1)
#define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2)
-#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4)
#define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6)
#define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7)
#define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8)
.event_group = &lpc32xx_event_pin_regs,
.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
},
+ [IRQ_LPC32XX_GPI_28] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
+ },
[IRQ_LPC32XX_GPIO_00] = {
.event_group = &lpc32xx_event_int_regs,
.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
if (state)
eventreg |= lpc32xx_events[d->irq].mask;
- else
+ else {
eventreg &= ~lpc32xx_events[d->irq].mask;
+ /*
+ * When disabling the wakeup, clear the latched
+ * event
+ */
+ __raw_writel(lpc32xx_events[d->irq].mask,
+ lpc32xx_events[d->irq].
+ event_group->rawstat_reg);
+ }
+
__raw_writel(eventreg,
lpc32xx_events[d->irq].event_group->enab_reg);
/* Setup SIC1 */
__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
- __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
- __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+ __raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+ __raw_writel(SIC1_ATR_DEFAULT,
+ LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
/* Setup SIC2 */
__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
- __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
- __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+ __raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+ __raw_writel(SIC2_ATR_DEFAULT,
+ LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
/* Configure supported IRQ's */
for (i = 0; i < NR_IRQS; i++) {
char *uart_ck_name;
u32 ck_mode_mask;
void __iomem *pdiv_clk_reg;
+ resource_size_t mapbase;
};
static struct uartinit uartinit_data[] __initdata = {
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+ .mapbase = LPC32XX_UART5_BASE,
},
#endif
#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+ .mapbase = LPC32XX_UART3_BASE,
},
#endif
#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+ .mapbase = LPC32XX_UART4_BASE,
},
#endif
#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+ .mapbase = LPC32XX_UART6_BASE,
},
#endif
};
/* pre-UART clock divider set to 1 */
__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+
+ /*
+ * Force a flush of the RX FIFOs to work around a
+ * HW bug
+ */
+ puart = uartinit_data[i].mapbase;
+ __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+ __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+ j = LPC32XX_SUART_FIFO_SIZE;
+ while (j--)
+ tmp = __raw_readl(
+ LPC32XX_UART_DLL_FIFO(puart));
+ __raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
}
/* This needs to be done after all UART clocks are setup */
__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
- for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+ for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
/* Force a flush of the RX FIFOs to work around a HW bug */
puart = serial_std_platform_data[i].mapbase;
__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/interrupt.h>
-#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
-#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <mach/pxa168.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
-#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/mv78xx0.h>
#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
#include <plat/orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
****************************************************************************/
void __init mv78xx0_ehci0_init(void)
{
- orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0);
+ orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA);
}
#define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1)
#define MPP0_GPIO MPP(0, 0x0, 1, 1, 1)
-#define MPP0_GE0_COL MPP(0, 0x1, 1, 0, 1)
-#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 1, 1)
+#define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1)
+#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1)
#define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1)
#define MPP1_GPIO MPP(1, 0x0, 1, 1, 1)
-#define MPP1_GE0_RXERR MPP(1, 0x1, 1, 0, 1)
-#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 1, 1)
+#define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1)
+#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1)
#define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1)
#define MPP2_GPIO MPP(2, 0x0, 1, 1, 1)
-#define MPP2_GE0_CRS MPP(2, 0x1, 1, 0, 1)
-#define MPP2_GE1_RXCTL MPP(2, 0x2, 1, 0, 1)
+#define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1)
+#define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1)
#define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1)
#define MPP3_GPIO MPP(3, 0x0, 1, 1, 1)
-#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 1, 1)
-#define MPP3_GE1_RXCLK MPP(3, 0x2, 1, 0, 1)
+#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1)
+#define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1)
#define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1)
#define MPP4_GPIO MPP(4, 0x0, 1, 1, 1)
-#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 1, 1)
-#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 1, 1)
+#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1)
+#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1)
#define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1)
#define MPP5_GPIO MPP(5, 0x0, 1, 1, 1)
-#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 1, 1)
-#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 1, 1)
+#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1)
+#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1)
#define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1)
#define MPP6_GPIO MPP(6, 0x0, 1, 1, 1)
-#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 1, 1)
-#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 1, 1)
+#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1)
+#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1)
#define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1)
#define MPP7_GPIO MPP(7, 0x0, 1, 1, 1)
-#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 1, 1)
-#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 1, 1)
+#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1)
+#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1)
#define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1)
#define MPP8_GPIO MPP(8, 0x0, 1, 1, 1)
-#define MPP8_GE0_RXD4 MPP(8, 0x1, 1, 0, 1)
-#define MPP8_GE1_RXD0 MPP(8, 0x2, 1, 0, 1)
+#define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1)
+#define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1)
#define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1)
#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1)
-#define MPP9_GE0_RXD5 MPP(9, 0x1, 1, 0, 1)
-#define MPP9_GE1_RXD1 MPP(9, 0x2, 1, 0, 1)
+#define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1)
+#define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1)
#define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1)
#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1)
-#define MPP10_GE0_RXD6 MPP(10, 0x1, 1, 0, 1)
-#define MPP10_GE1_RXD2 MPP(10, 0x2, 1, 0, 1)
+#define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1)
+#define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1)
#define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1)
#define MPP11_GPIO MPP(11, 0x0, 1, 1, 1)
-#define MPP11_GE0_RXD7 MPP(11, 0x1, 1, 0, 1)
-#define MPP11_GE1_RXD3 MPP(11, 0x2, 1, 0, 1)
+#define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1)
+#define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1)
#define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1)
#define MPP12_GPIO MPP(12, 0x0, 1, 1, 1)
-#define MPP12_M_BB MPP(12, 0x3, 1, 0, 1)
-#define MPP12_UA0_CTSn MPP(12, 0x4, 1, 0, 1)
-#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 1, 1)
-#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 1, 1)
+#define MPP12_M_BB MPP(12, 0x3, 0, 0, 1)
+#define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1)
+#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1)
+#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1)
#define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1)
#define MPP13_GPIO MPP(13, 0x0, 1, 1, 1)
-#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 1, 1)
-#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 1, 1)
-#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 1, 1)
-#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 1, 1)
+#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1)
+#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1)
+#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1)
+#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1)
#define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1)
#define MPP14_GPIO MPP(14, 0x0, 1, 1, 1)
-#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 1, 1)
-#define MPP14_UA1_CTSn MPP(14, 0x4, 1, 0, 1)
-#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 1, 1)
-#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 1, 1)
+#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1)
+#define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1)
+#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1)
+#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1)
#define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1)
#define MPP15_GPIO MPP(15, 0x0, 1, 1, 1)
-#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 1, 1)
-#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 1, 1)
-#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 1, 1)
-#define MPP15_TDM_SMISO MPP(15, 0x6, 1, 0, 1)
+#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1)
+#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1)
+#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1)
+#define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1)
#define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1)
#define MPP16_GPIO MPP(16, 0x0, 1, 1, 1)
-#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 1, 1)
-#define MPP16_UA2_TXD MPP(16, 0x4, 0, 1, 1)
-#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 1, 1)
-#define MPP16_TDM_INTn MPP(16, 0x6, 1, 0, 1)
+#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1)
+#define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1)
+#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1)
+#define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1)
#define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1)
#define MPP17_GPIO MPP(17, 0x0, 1, 1, 1)
-#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 1, 1)
-#define MPP17_UA2_RXD MPP(17, 0x4, 1, 0, 1)
-#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 1, 1)
-#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 1, 1)
+#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1)
+#define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1)
+#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1)
+#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1)
#define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1)
#define MPP18_GPIO MPP(18, 0x0, 1, 1, 1)
-#define MPP18_UA0_CTSn MPP(18, 0x4, 1, 0, 1)
-#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 1, 1)
+#define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1)
+#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1)
#define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1)
#define MPP19_GPIO MPP(19, 0x0, 1, 1, 1)
-#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 1, 1)
-#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 1, 1)
+#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1)
+#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1)
#define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1)
#define MPP20_GPIO MPP(20, 0x0, 1, 1, 1)
-#define MPP20_UA1_CTSs MPP(20, 0x4, 1, 0, 1)
-#define MPP20_TDM_PCLK MPP(20, 0x6, 1, 1, 0)
+#define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1)
+#define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0)
#define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1)
#define MPP21_GPIO MPP(21, 0x0, 1, 1, 1)
-#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 1, 1)
-#define MPP21_TDM_FSYNC MPP(21, 0x6, 1, 1, 0)
+#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1)
+#define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0)
#define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1)
#define MPP22_GPIO MPP(22, 0x0, 1, 1, 1)
-#define MPP22_UA3_TDX MPP(22, 0x4, 0, 1, 1)
-#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 1, 1)
-#define MPP22_TDM_DRX MPP(22, 0x6, 1, 0, 1)
+#define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1)
+#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1)
+#define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1)
#define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1)
#define MPP23_GPIO MPP(23, 0x0, 1, 1, 1)
-#define MPP23_UA3_RDX MPP(23, 0x4, 1, 0, 1)
-#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 1, 1)
-#define MPP23_TDM_DTX MPP(23, 0x6, 0, 1, 1)
+#define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1)
+#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1)
+#define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1)
#define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1)
#define MPP24_GPIO MPP(24, 0x0, 1, 1, 1)
-#define MPP24_UA2_TXD MPP(24, 0x4, 0, 1, 1)
-#define MPP24_TDM_INTn MPP(24, 0x6, 1, 0, 1)
+#define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1)
+#define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1)
#define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1)
#define MPP25_GPIO MPP(25, 0x0, 1, 1, 1)
-#define MPP25_UA2_RXD MPP(25, 0x4, 1, 0, 1)
-#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 1, 1)
+#define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1)
+#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1)
#define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1)
#define MPP26_GPIO MPP(26, 0x0, 1, 1, 1)
-#define MPP26_UA2_CTSn MPP(26, 0x4, 1, 0, 1)
-#define MPP26_TDM_PCLK MPP(26, 0x6, 1, 1, 1)
+#define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1)
+#define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1)
#define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1)
#define MPP27_GPIO MPP(27, 0x0, 1, 1, 1)
-#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 1, 1)
-#define MPP27_TDM_FSYNC MPP(27, 0x6, 1, 1, 1)
+#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1)
+#define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1)
#define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1)
#define MPP28_GPIO MPP(28, 0x0, 1, 1, 1)
-#define MPP28_UA3_TXD MPP(28, 0x4, 0, 1, 1)
-#define MPP28_TDM_DRX MPP(28, 0x6, 1, 0, 1)
+#define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1)
+#define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1)
#define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1)
#define MPP29_GPIO MPP(29, 0x0, 1, 1, 1)
-#define MPP29_UA3_RXD MPP(29, 0x4, 1, 0, 1)
-#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 1, 1)
-#define MPP29_TDM_DTX MPP(29, 0x6, 0, 1, 1)
+#define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1)
+#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1)
+#define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1)
#define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1)
#define MPP30_GPIO MPP(30, 0x0, 1, 1, 1)
-#define MPP30_UA3_CTSn MPP(30, 0x4, 1, 0, 1)
+#define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1)
#define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1)
#define MPP31_GPIO MPP(31, 0x0, 1, 1, 1)
-#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 1, 1)
-#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 1, 1)
+#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1)
+#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1)
#define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1)
#define MPP32_GPIO MPP(32, 0x1, 1, 1, 1)
-#define MPP32_UA3_TDX MPP(32, 0x4, 0, 1, 1)
-#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 1, 1)
-#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 1, 1)
+#define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1)
+#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1)
+#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1)
#define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1)
#define MPP33_GPIO MPP(33, 0x1, 1, 1, 1)
-#define MPP33_UA3_RDX MPP(33, 0x4, 1, 0, 1)
-#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 1, 1)
+#define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1)
+#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1)
#define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1)
#define MPP34_GPIO MPP(34, 0x1, 1, 1, 1)
-#define MPP34_UA2_TDX MPP(34, 0x4, 0, 1, 1)
-#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 1, 1)
+#define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1)
+#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1)
#define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1)
#define MPP35_GPIO MPP(35, 0x1, 1, 1, 1)
-#define MPP35_UA2_RDX MPP(35, 0x4, 1, 0, 1)
-#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 1, 1)
+#define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1)
+#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1)
#define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1)
#define MPP36_GPIO MPP(36, 0x1, 1, 1, 1)
-#define MPP36_UA0_CTSn MPP(36, 0x2, 1, 0, 1)
-#define MPP36_UA2_TDX MPP(36, 0x4, 0, 1, 1)
-#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 1, 1)
+#define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1)
+#define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1)
+#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1)
#define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1)
#define MPP37_GPIO MPP(37, 0x1, 1, 1, 1)
-#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 1, 1)
-#define MPP37_UA2_RXD MPP(37, 0x4, 1, 0, 1)
-#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 1, 1)
-#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 1, 1)
+#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1)
+#define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1)
+#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1)
+#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1)
#define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1)
#define MPP38_GPIO MPP(38, 0x1, 1, 1, 1)
-#define MPP38_UA1_CTSn MPP(38, 0x2, 1, 0, 1)
-#define MPP38_UA3_TXD MPP(38, 0x4, 0, 1, 1)
-#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 1, 1)
-#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 1, 1)
+#define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1)
+#define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1)
+#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1)
+#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1)
#define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1)
#define MPP39_GPIO MPP(39, 0x1, 1, 1, 1)
-#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 1, 1)
-#define MPP39_UA3_RXD MPP(39, 0x4, 1, 0, 1)
-#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 1, 1)
-#define MPP39_TDM_SMISO MPP(39, 0x6, 1, 0, 1)
+#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1)
+#define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1)
+#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1)
+#define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1)
#define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1)
#define MPP40_GPIO MPP(40, 0x1, 1, 1, 1)
-#define MPP40_TDM_INTn MPP(40, 0x6, 1, 0, 1)
+#define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1)
#define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1)
#define MPP41_GPIO MPP(41, 0x1, 1, 1, 1)
-#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 1, 1)
+#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1)
#define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1)
#define MPP42_GPIO MPP(42, 0x1, 1, 1, 1)
-#define MPP42_TDM_PCLK MPP(42, 0x6, 1, 1, 1)
+#define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1)
#define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1)
#define MPP43_GPIO MPP(43, 0x1, 1, 1, 1)
-#define MPP43_TDM_FSYNC MPP(43, 0x6, 1, 1, 1)
+#define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1)
#define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1)
#define MPP44_GPIO MPP(44, 0x1, 1, 1, 1)
-#define MPP44_TDM_DRX MPP(44, 0x6, 1, 0, 1)
+#define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1)
#define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1)
#define MPP45_GPIO MPP(45, 0x1, 1, 1, 1)
-#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 1, 1)
-#define MPP45_TDM_DRX MPP(45, 0x6, 0, 1, 1)
+#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1)
+#define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1)
#define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1)
#define MPP46_GPIO MPP(46, 0x1, 1, 1, 1)
-#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 1, 1)
+#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1)
#define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1)
#define MPP48_GPIO MPP(48, 0x1, 1, 1, 1)
-#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 1, 1)
+#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1)
#define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1)
#define MPP49_GPIO MPP(49, 0x1, 1, 1, 1)
-#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 1, 1)
-#define MPP49_M_BB MPP(49, 0x4, 1, 0, 1)
+#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1)
+#define MPP49_M_BB MPP(49, 0x4, 0, 0, 1)
#define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1)
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
omap1_usb_init(&innovator1510_usb_config);
- innovator_config[1].data = &innovator1510_lcd_config;
+ innovator_config[0].data = &innovator1510_lcd_config;
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
if (cpu_is_omap1610()) {
omap1_usb_init(&h2_usb_config);
- innovator_config[1].data = &innovator1610_lcd_config;
+ innovator_config[0].data = &innovator1610_lcd_config;
}
#endif
omap_board_config = innovator_config;
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP3_TOUCHBOOK
bool "OMAP3 Touch Book"
depends on ARCH_OMAP3
default y
- select BACKLIGHT_CLASS_DEVICE
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
depends on ARCH_OMAP4
select OMAP_PACKAGE_CBL
select OMAP_PACKAGE_CBS
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP4_PANDA
bool "OMAP4 Panda Board"
depends on ARCH_OMAP4
select OMAP_PACKAGE_CBL
select OMAP_PACKAGE_CBS
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config OMAP3_EMU
bool "OMAP3 debugging peripherals"
going on could result in system crashes;
config OMAP4_ERRATA_I688
- bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
- depends on ARCH_OMAP4 && BROKEN
+ bool "OMAP4 errata: Async Bridge Corruption"
+ depends on ARCH_OMAP4
select ARCH_HAS_BARRIERS
help
If a data is stalled inside asynchronous bridge because of back
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
clkt_dpll.o clkt_clksel.o
-secure-common = omap-smc.o omap-secure.o
+secure-common = omap-smc.o omap-secure.o
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
#define ETH_KS8851_QUART 138
#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184
#define OMAP4_SFH7741_ENABLE_GPIO 188
-#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD 63 /* Hotplug detect */
#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
#define DLP_POWER_ON_GPIO 40
}
static struct gpio sdp4430_hdmi_gpios[] = {
- { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
+ { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+ { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
};
static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
- gpio_free(HDMI_GPIO_LS_OE);
- gpio_free(HDMI_GPIO_HPD);
+ gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
}
static struct nokia_dsi_panel_data dsi1_panel = {
pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
}
+static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
+ .hpd_gpio = HDMI_GPIO_HPD,
+};
+
static struct omap_dss_device sdp4430_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.platform_enable = sdp4430_panel_enable_hdmi,
.platform_disable = sdp4430_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
+ .data = &sdp4430_hdmi_data,
};
static struct picodlp_panel_data sdp4430_picodlp_pdata = {
.default_device = &sdp4430_lcd_device,
};
-static void omap_4430sdp_display_init(void)
+static void __init omap_4430sdp_display_init(void)
{
int r;
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
+
+ omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
#ifdef CONFIG_OMAP_MUX
#define board_mux NULL
#endif
-static void omap4_sdp4430_wifi_mux_init(void)
+static void __init omap4_sdp4430_wifi_mux_init(void)
{
omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
OMAP_PIN_OFF_WAKEUPENABLE);
.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
};
-static void omap4_sdp4430_wifi_init(void)
+static void __init omap4_sdp4430_wifi_init(void)
{
+ int ret;
+
omap4_sdp4430_wifi_mux_init();
- if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data))
- pr_err("Error setting wl12xx data\n");
- platform_device_register(&omap_vwlan_device);
+ ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
+ if (ret)
+ pr_err("Error setting wl12xx data: %d\n", ret);
+ ret = platform_device_register(&omap_vwlan_device);
+ if (ret)
+ pr_err("Error registering wl12xx device: %d\n", ret);
}
static void __init omap_4430sdp_init(void)
.reset_gpio_port[2] = -EINVAL
};
-static void cm_t35_init_usbh(void)
+static void __init cm_t35_init_usbh(void)
{
int err;
#include <linux/i2c/twl.h>
#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <plat/board.h>
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap242x_boards_compat,
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_init,
.timer = &omap3_timer,
.dt_compat = omap3_boards_compat,
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = omap4_init,
.timer = &omap4_timer,
.dt_compat = omap4_boards_compat,
else
*openp = 0;
+#ifdef CONFIG_MMC_OMAP
omap_mmc_notify_cover_event(mmc_device, index, *openp);
+#else
+ pr_warn("MMC: notify cover event not available\n");
+#endif
}
static int n8x0_mmc_late_init(struct device *dev)
gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+ gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
platform_device_register(&leds_gpio);
{ OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" },
};
+static void __init omap3_evm_wl12xx_init(void)
+{
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
+ int ret;
+
+ /* WL12xx WLAN Init */
+ ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
+ if (ret)
+ pr_err("error setting wl12xx data: %d\n", ret);
+ ret = platform_device_register(&omap3evm_wlan_regulator);
+ if (ret)
+ pr_err("error registering wl12xx device: %d\n", ret);
+#endif
+}
+
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
omap3_evm_display_init();
-
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
- /* WL12xx WLAN Init */
- if (wl12xx_set_platform_data(&omap3evm_wlan_data))
- pr_err("error setting wl12xx data\n");
- platform_device_register(&omap3evm_wlan_regulator);
-#endif
+ omap3_evm_wl12xx_init();
}
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
#define GPIO_HUB_NRESET 62
#define GPIO_WIFI_PMENA 43
#define GPIO_WIFI_IRQ 53
-#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD 63 /* Hotplug detect */
/* wl127x BT, FM, GPS connectivity chip */
static int wl1271_gpios[] = {46, -1, -1};
}
static struct gpio panda_hdmi_gpios[] = {
- { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
+ { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+ { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
};
static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
- gpio_free(HDMI_GPIO_LS_OE);
- gpio_free(HDMI_GPIO_HPD);
+ gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
}
+static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+ .hpd_gpio = HDMI_GPIO_HPD,
+};
+
static struct omap_dss_device omap4_panda_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.platform_enable = omap4_panda_panel_enable_hdmi,
.platform_disable = omap4_panda_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
+ .data = &omap4_panda_hdmi_data,
};
static struct omap_dss_device *omap4_panda_dss_devices[] = {
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
+
+ omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
static void __init omap4_panda_init(void)
{
int package = OMAP_PACKAGE_CBS;
+ int ret;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
- if (wl12xx_set_platform_data(&omap_panda_wlan_data))
- pr_err("error setting wl12xx data\n");
+ ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
+ if (ret)
+ pr_err("error setting wl12xx data: %d\n", ret);
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
void __init zoom_peripherals_init(void)
{
- if (wl12xx_set_platform_data(&omap_zoom_wlan_data))
- pr_err("error setting wl12xx data\n");
+ int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
+
+ if (ret)
+ pr_err("error setting wl12xx data: %d\n", ret);
omap_i2c_init();
platform_device_register(&omap_vwlan_device);
void am33xx_map_io(void);
void omap4_map_io(void);
void ti81xx_map_io(void);
+void omap_barriers_init(void);
/**
* omap_test_timeout - busy-loop, testing a condition
struct timespec ts_preidle, ts_postidle, ts_idle;
u32 cpu1_state;
int idle_time;
- int new_state_idx;
int cpu_id = smp_processor_id();
/* Used to keep track of the total time in idle */
*/
cpu1_state = pwrdm_read_pwrst(cpu1_pd);
if (cpu1_state != PWRDM_POWER_OFF) {
- new_state_idx = drv->safe_state_index;
- cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+ index = drv->safe_state_index;
+ cx = cpuidle_get_statedata(&dev->states_usage[index]);
}
if (index > 0)
break;
default:
pr_err("Invalid McSPI Revision value\n");
+ kfree(pdata);
return -EINVAL;
}
u32 reg;
u16 control_i2c_1;
- /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
- omap_mux_init_signal("hdmi_hpd",
- OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_cec",
OMAP_PIN_INPUT_PULLUP);
- /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
omap_mux_init_signal("hdmi_ddc_scl",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_ddc_sda",
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <plat/board.h>
#include <plat/gpmc.h>
.flags = SMSC911X_USE_16BIT,
};
+static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+/* Generic regulator definition to satisfy smsc911x */
+static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply),
+ .consumer_supplies = gpmc_smsc911x_supply,
+};
+
+static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
+ .supply_name = "gpmc_smsc911x",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .startup_delay = 0,
+ .enable_high = 0,
+ .enabled_at_boot = 1,
+ .init_data = &gpmc_smsc911x_reg_init_data,
+};
+
+/*
+ * Platform device id of 42 is a temporary fix to avoid conflicts
+ * with other reg-fixed-voltage devices. The real fix should
+ * involve the driver core providing a way of dynamically
+ * assigning a unique id on registration for platform devices
+ * in the same name space.
+ */
+static struct platform_device gpmc_smsc911x_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = 42,
+ .dev = {
+ .platform_data = &gpmc_smsc911x_fixed_reg_data,
+ },
+};
+
/*
* Initialize smsc911x device connected to the GPMC. Note that we
* assume that pin multiplexing is done in the board-*.c file,
gpmc_cfg = board_data;
+ ret = platform_device_register(&gpmc_smsc911x_regulator);
+ if (ret < 0) {
+ pr_err("Unable to register smsc911x regulators: %d\n", ret);
+ return;
+ }
+
if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
pr_err("Failed to request GPMC mem region\n");
return;
case GPMC_CONFIG_DEV_SIZE:
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ /* clear 2 target bits */
+ regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
+
+ /* set the proper value */
regval |= GPMC_CONFIG1_DEVICESIZE(wval);
+
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
break;
{
u32 reg;
- if (mmc->slots[0].internal_clock) {
- reg = omap_ctrl_readl(control_devconf1_offset);
+ reg = omap_ctrl_readl(control_devconf1_offset);
+ if (mmc->slots[0].internal_clock)
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
- omap_ctrl_writel(reg, control_devconf1_offset);
- }
+ else
+ reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
+ omap_ctrl_writel(reg, control_devconf1_offset);
}
-static void hsmmc23_before_set_reg(struct device *dev, int slot,
+static void hsmmc2_before_set_reg(struct device *dev, int slot,
int power_on, int vdd)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
}
}
-static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
- struct omap_mmc_platform_data *mmc)
+static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
+ struct omap_mmc_platform_data *mmc)
{
char *hc_name;
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
}
- /* FALLTHROUGH */
- case 3:
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
/* off-chip level shifting, or none */
- mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
+ mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
mmc->slots[0].after_set_reg = NULL;
}
break;
+ case 3:
case 4:
case 5:
mmc->slots[0].before_set_reg = NULL;
return 0;
}
+static int omap_hsmmc_done;
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
-void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
+void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
kfree(mmc_data);
}
-void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
+void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
u32 reg;
+ if (omap_hsmmc_done)
+ return;
+
+ omap_hsmmc_done = 1;
+
if (!cpu_is_omap44xx()) {
if (cpu_is_omap2430()) {
control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+ omap_barriers_init();
}
#endif
omap_pm_if_early_init();
}
-#ifdef CONFIG_ARCH_OMAP2
+#ifdef CONFIG_SOC_OMAP2420
void __init omap2420_init_early(void)
{
omap2_set_globals_242x();
omap_hwmod_init_postsetup();
omap2420_clk_init();
}
+#endif
+#ifdef CONFIG_SOC_OMAP2430
void __init omap2430_init_early(void)
{
omap2_set_globals_243x();
.ops = &omap2_mbox_ops,
.priv = &omap2_mbox_iva_priv,
};
+#endif
-struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
+#ifdef CONFIG_ARCH_OMAP2
+struct omap_mbox *omap2_mboxes[] = {
+ &mbox_dsp_info,
+#ifdef CONFIG_SOC_OMAP2420
+ &mbox_iva_info,
+#endif
+ NULL
+};
#endif
#if defined(CONFIG_ARCH_OMAP4)
platform_driver_unregister(&omap2_mbox_driver);
}
-module_init(omap2_mbox_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap2_mbox_init);
module_exit(omap2_mbox_exit);
MODULE_LICENSE("GPL v2");
static char *omap_mux_options;
-static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
- int gpio, int val)
+static int _omap_mux_init_gpio(struct omap_mux_partition *partition,
+ int gpio, int val)
{
struct omap_mux_entry *e;
struct omap_mux *gpio_mux = NULL;
return 0;
}
-int __init omap_mux_init_gpio(int gpio, int val)
+int omap_mux_init_gpio(int gpio, int val)
{
struct omap_mux_partition *partition;
int ret;
return -ENODEV;
}
-static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
- const char *muxname,
- struct omap_mux **found_mux)
+static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
+ const char *muxname,
+ struct omap_mux **found_mux)
{
struct omap_mux *mux = NULL;
struct omap_mux_entry *e;
return -ENODEV;
}
-static int __init
+static int
omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)
return -ENODEV;
}
-int __init omap_mux_init_signal(const char *muxname, int val)
+int omap_mux_init_signal(const char *muxname, int val)
{
struct omap_mux_partition *partition = NULL;
struct omap_mux *mux = NULL;
omap_mux_package_init_balls(package_balls, superset);
}
-static void omap_mux_init_signals(struct omap_mux_partition *partition,
- struct omap_board_mux *board_mux)
+static void __init omap_mux_init_signals(struct omap_mux_partition *partition,
+ struct omap_board_mux *board_mux)
{
omap_mux_set_cmdline_signals();
omap_mux_write_array(partition, board_mux);
{
}
-static void omap_mux_init_signals(struct omap_mux_partition *partition,
- struct omap_board_mux *board_mux)
+static void __init omap_mux_init_signals(struct omap_mux_partition *partition,
+ struct omap_board_mux *board_mux)
{
}
#include <linux/linkage.h>
#include <linux/init.h>
+ __CPUINIT
/*
* OMAP4 specific entry point for secondary CPU to jump from ROM
* code. This routine also provides a holding flag into which
#include <plat/irqs.h>
#include <plat/sram.h>
+#include <plat/omap-secure.h>
#include <mach/hardware.h>
#include <mach/omap-wakeupgen.h>
void __iomem *dram_sync, *sram_sync;
+static phys_addr_t paddr;
+static u32 size;
+
void omap_bus_sync(void)
{
if (dram_sync && sram_sync) {
}
}
-static int __init omap_barriers_init(void)
+/* Steal one page physical memory for barrier implementation */
+int __init omap_barrier_reserve_memblock(void)
{
- struct map_desc dram_io_desc[1];
- phys_addr_t paddr;
- u32 size;
-
- if (!cpu_is_omap44xx())
- return -ENODEV;
size = ALIGN(PAGE_SIZE, SZ_1M);
paddr = arm_memblock_steal(size, SZ_1M);
+ return 0;
+}
+
+void __init omap_barriers_init(void)
+{
+ struct map_desc dram_io_desc[1];
+
dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
dram_io_desc[0].pfn = __phys_to_pfn(paddr);
dram_io_desc[0].length = size;
pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
(long long) paddr, dram_io_desc[0].virtual);
- return 0;
}
-core_initcall(omap_barriers_init);
+#else
+void __init omap_barriers_init(void)
+{}
#endif
void __init gic_init_irq(void)
if (oh->_state != _HWMOD_STATE_INITIALIZED &&
oh->_state != _HWMOD_STATE_IDLE &&
oh->_state != _HWMOD_STATE_DISABLED) {
- WARN(1, "omap_hwmod: %s: enabled state can only be entered "
- "from initialized, idle, or disabled state\n", oh->name);
+ WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n",
+ oh->name);
return -EINVAL;
}
pr_debug("omap_hwmod: %s: idling\n", oh->name);
if (oh->_state != _HWMOD_STATE_ENABLED) {
- WARN(1, "omap_hwmod: %s: idle state can only be entered from "
- "enabled state\n", oh->name);
+ WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n",
+ oh->name);
return -EINVAL;
}
if (oh->_state != _HWMOD_STATE_IDLE &&
oh->_state != _HWMOD_STATE_ENABLED) {
- WARN(1, "omap_hwmod: %s: disabled state can only be entered "
- "from idle, or enabled state\n", oh->name);
+ WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n",
+ oh->name);
return -EINVAL;
}
BUG_ON(!oh);
if (!oh->class->sysc || !oh->class->sysc->sysc_flags) {
- WARN(1, "omap_device: %s: OCP barrier impossible due to "
- "device configuration\n", oh->name);
+ WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n",
+ oh->name);
return;
}
.reset = omap_dss_reset,
};
-/*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_dispc_hwmod_class = {
- .name = "dispc",
- .sysc = &omap2_dispc_sysc,
-};
-
/*
* 'rfbi' class
* remote frame buffer interface
{ .name = "dispc", .dma_req = 5 },
{ .dma_req = -1 }
};
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap2_dispc_sysc,
+};
+
/* OMAP2xxx Timer Common */
static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
.rev_offs = 0x0000,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
};
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSC_HAS_ENAWAKEUP),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap3_dispc_sysc,
+};
+
/* l4_core -> dss_dispc */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
.master = &omap3xxx_l4_core_hwmod,
static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
.name = "dss_dispc",
- .class = &omap2_dispc_hwmod_class,
+ .class = &omap3_dispc_hwmod_class,
.mpu_irqs = omap2_dispc_irqs,
.main_clk = "dss1_alwon_fck",
.prcm = {
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
- /* dss class */
- &omap3xxx_dss_dispc_hwmod,
- &omap3xxx_dss_dsi1_hwmod,
- &omap3xxx_dss_rfbi_hwmod,
- &omap3xxx_dss_venc_hwmod,
-
/* i2c class */
&omap3xxx_i2c1_hwmod,
&omap3xxx_i2c2_hwmod,
NULL
};
+static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = {
+ /* dss class */
+ &omap3xxx_dss_dispc_hwmod,
+ &omap3xxx_dss_dsi1_hwmod,
+ &omap3xxx_dss_rfbi_hwmod,
+ &omap3xxx_dss_venc_hwmod,
+ NULL
+};
+
int __init omap3xxx_hwmod_init(void)
{
int r;
if (h)
r = omap_hwmod_register(h);
+ if (r < 0)
+ return r;
+
+ /*
+ * DSS code presumes that dss_core hwmod is handled first,
+ * _before_ any other DSS related hwmods so register common
+ * DSS hwmods last to ensure that dss_core is already registered.
+ * Otherwise some change things may happen, for ex. if dispc
+ * is handled before dss_core and DSS is enabled in bootloader
+ * DIPSC will be reset with outputs enabled which sometimes leads
+ * to unrecoverable L3 error.
+ * XXX The long-term fix to this is to ensure modules are set up
+ * in dependency order in the hwmod core code.
+ */
+ r = omap_hwmod_register(omap3xxx_dss_hwmods);
return r;
}
static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = {
{
+ .name = "mpu",
.pa_start = 0x4012e000,
.pa_end = 0x4012e07f,
.flags = ADDR_TYPE_RT
static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = {
{
+ .name = "dma",
.pa_start = 0x4902e000,
.pa_end = 0x4902e07f,
.flags = ADDR_TYPE_RT
freq = clk->rate;
clk_put(clk);
+ rcu_read_lock();
opp = opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
+ rcu_read_unlock();
pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = opp_get_voltage(opp);
+ rcu_read_unlock();
if (!bootup_volt) {
pr_err("%s: unable to find voltage corresponding "
"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
- /* Ignore UART clocks. These are handled by UART core (serial.c) */
- f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK);
- f2 &= ~OMAP24XX_EN_UART3_MASK;
-
- if (f1 | f2)
- return 1;
- return 0;
+ return (f1 | f2) ? 1 : 0;
}
static void omap2_enter_full_retention(void)
#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include <plat/irqs.h>
#include "vp.h"
#include "common.h"
#include <plat/cpu.h>
+#include <plat/irqs.h>
#include <plat/prcm.h>
#include "vp.h"
omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
}
-static void omap_uart_set_forceidle(struct platform_device *pdev)
+static void omap_uart_set_smartidle(struct platform_device *pdev)
{
struct omap_device *od = to_omap_device(pdev);
- omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_FORCE);
+ omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
}
#else
static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
{}
static void omap_uart_set_noidle(struct platform_device *pdev) {}
-static void omap_uart_set_forceidle(struct platform_device *pdev) {}
+static void omap_uart_set_smartidle(struct platform_device *pdev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
omap_up.flags = UPF_BOOT_AUTOCONF;
omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
- omap_up.set_forceidle = omap_uart_set_forceidle;
+ omap_up.set_forceidle = omap_uart_set_smartidle;
omap_up.set_noidle = omap_uart_set_noidle;
omap_up.enable_wakeup = omap_uart_enable_wakeup;
omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
ret = sr_late_init(sr_info);
if (ret) {
pr_warning("%s: Error in SR late init\n", __func__);
- return ret;
+ goto err_iounmap;
}
}
static u32 notrace dmtimer_read_sched_clock(void)
{
if (clksrc.reserved)
- return __omap_dm_timer_read_counter(clksrc.io_base, 1);
+ return __omap_dm_timer_read_counter(&clksrc, 1);
return 0;
}
void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
{
struct omap_hwmod *oh[2];
- struct omap_device *od;
+ struct platform_device *pdev;
int bus_id = -1;
int i;
return;
}
- od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+ pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
(void *)&usbhs_data, sizeof(usbhs_data),
omap_uhhtll_latency,
ARRAY_SIZE(omap_uhhtll_latency), false);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("Could not build hwmod devices %s,%s\n",
USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
return;
* omap_vc_i2c_init - initialize I2C interface to PMIC
* @voltdm: voltage domain containing VC data
*
- * Use PMIC supplied seetings for I2C high-speed mode and
+ * Use PMIC supplied settings for I2C high-speed mode and
* master code (if set) and program the VC I2C configuration
* register.
*
if (initialized) {
if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
- pr_warn("%s: I2C config for all channels must match.",
- __func__);
+ pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).",
+ __func__, voltdm->name, i2c_high_speed);
return;
}
u32 val;
if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
- pr_err("%s: PMIC info requried to configure vc for"
- "vdd_%s not populated.Hence cannot initialize vc\n",
- __func__, voltdm->name);
+ pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name);
return;
}
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
+#ifdef CONFIG_PM_OPP
if (cpu_is_omap3630()) {
omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
}
+#endif
if (cpu_is_omap3517() || cpu_is_omap3505())
voltdms = voltagedomains_am35xx;
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
+#ifdef CONFIG_PM_OPP
omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
+#endif
for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
voltdm->sys_clk.name = sys_clk_name;
u32 val, sys_clk_rate, timeout, waittime;
u32 vddmin, vddmax, vstepmin, vstepmax;
+ if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
+ pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name);
+ return;
+ }
+
if (!voltdm->read || !voltdm->write) {
pr_err("%s: No read/write API for accessing vdd_%s regs\n",
__func__, voltdm->name);
#include <mach/hardware.h>
#include <mach/orion5x.h>
#include <plat/orion_nand.h>
+#include <plat/ehci-orion.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
****************************************************************************/
void __init orion5x_ehci0_init(void)
{
- orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL);
+ orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL,
+ EHCI_PHY_ORION);
}
#include <mach/hx4700.h>
#include <mach/irda.h>
+#include <sound/ak4641.h>
#include <video/platform_lcd.h>
#include <video/w100fb.h>
},
};
+/*
+ * Asahi Kasei AK4641 on I2C
+ */
+
+static struct ak4641_platform_data ak4641_info = {
+ .gpio_power = GPIO27_HX4700_CODEC_ON,
+ .gpio_npdn = GPIO109_HX4700_CODEC_nPDN,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("ak4641", 0x12),
+ .platform_data = &ak4641_info,
+ },
+};
+
+static struct platform_device audio = {
+ .name = "hx4700-audio",
+ .id = -1,
+};
+
+
/*
* PCMCIA
*/
&gpio_vbus,
&power_supply,
&strataflash,
+ &audio,
&pcmcia,
};
pxa_set_ficp_info(&ficp_info);
pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/88pm860x.h>
-#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#define MAXCTRL_SEL_SH 4
#define MAXCTRL_STR (1u << 7)
+extern int max1111_read_channel(int);
/*
* Read MAX1111 ADC
*/
if (machine_is_tosa())
return 0;
- extern int max1111_read_channel(int);
-
/* max1111 accepts channels from 0-3, however,
* it is encoded from 0-7 here in the code.
*/
static unsigned long spitz_charger_wakeup(void)
{
unsigned long ret;
- ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
+ ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
<< GPIO_bit(SPITZ_GPIO_KEY_INT))
- | (!gpio_get_value(SPITZ_GPIO_SYNC)
- << GPIO_bit(SPITZ_GPIO_SYNC));
+ | gpio_get_value(SPITZ_GPIO_SYNC));
return ret;
}
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
};
-static int s3c2410_cpufreq_add(struct device *dev)
+static int s3c2410_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
return s3c_cpufreq_register(&s3c2410_cpufreq_info);
}
arch_initcall(s3c2410_cpufreq_init);
-static int s3c2410a_cpufreq_add(struct device *dev)
+static int s3c2410a_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
/* alter the maximum freq settings for S3C2410A. If a board knows
* it only has a maximum of 200, then it should register its own
s3c2410_cpufreq_info.max.pclk = 66500000;
s3c2410_cpufreq_info.name = "s3c2410a";
- return s3c2410_cpufreq_add(dev);
+ return s3c2410_cpufreq_add(dev, sif);
}
static struct subsys_interface s3c2410a_cpufreq_interface = {
},
};
-static int __init s3c2410_dma_add(struct device *dev)
+static int __init s3c2410_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c2410_dma_init();
s3c24xx_dma_order_set(&s3c2410_dma_order);
static int __init s3c2410_dma_drvinit(void)
{
- return subsys_interface_register(&s3c2410_interface);
+ return subsys_interface_register(&s3c2410_dma_interface);
}
arch_initcall(s3c2410_dma_drvinit);
{ .frequency = 270000000, .index = PLLVAL(127, 1, 1), },
};
-static int s3c2410_plls_add(struct device *dev)
+static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
{
return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
}
.resume = s3c2410_pm_resume,
};
-static int s3c2410_pm_add(struct device *dev)
+static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s3c2410_pm_prepare;
pm_cpu_sleep = s3c2410_cpu_suspend;
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
};
-static int s3c2412_cpufreq_add(struct device *dev)
+static int s3c2412_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
unsigned long fclk_rate;
.map_size = ARRAY_SIZE(s3c2412_dma_mappings),
};
-static int __init s3c2412_dma_add(struct device *dev)
+static int __init s3c2412_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c2410_dma_init();
return s3c24xx_dma_init_map(&s3c2412_dma_sel);
static struct irq_chip s3c2412_irq_rtc_chip;
-static int s3c2412_irq_add(struct device *dev)
+static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
{
}
-static int s3c2412_pm_add(struct device *dev)
+static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s3c2412_pm_prepare;
pm_cpu_sleep = s3c2412_cpu_suspend;
return 0;
}
-static int __init s3c2416_irq_add(struct device *dev)
+static int __init s3c2416_irq_add(struct device *dev,
+ struct subsys_interface *sif)
{
printk(KERN_INFO "S3C2416: IRQ Support\n");
__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
}
-static int s3c2416_pm_add(struct device *dev)
+static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s3c2416_pm_prepare;
pm_cpu_sleep = s3c2416_cpu_suspend;
CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
};
-static int s3c2440_clk_add(struct device *dev)
+static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *clock_upll;
struct clk *clock_h;
},
};
-static int __init s3c2440_dma_add(struct device *dev)
+static int __init s3c2440_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c2410_dma_init();
s3c24xx_dma_order_set(&s3c2440_dma_order);
.irq_ack = s3c_irq_wdtac97_ack,
};
-static int s3c2440_irq_add(struct device *dev)
+static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
};
-static int s3c2440_cpufreq_add(struct device *dev)
+static int s3c2440_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
xtal = s3c_cpufreq_clk_get(NULL, "xtal");
hclk = s3c_cpufreq_clk_get(NULL, "hclk");
{ .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
};
-static int s3c2440_plls12_add(struct device *dev)
+static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *xtal_clk;
unsigned long xtal;
{ .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
};
-static int s3c2440_plls169344_add(struct device *dev)
+static int s3c2440_plls169344_add(struct device *dev,
+ struct subsys_interface *sif)
{
struct clk *xtal_clk;
unsigned long xtal;
},
};
-static int s3c2442_clk_add(struct device *dev)
+static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *clock_upll;
struct clk *clock_h;
},
};
-static int s3c244x_clk_add(struct device *dev)
+static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
{
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
unsigned long clkdivn;
.irq_ack = s3c_irq_cam_ack,
};
-static int s3c244x_irq_add(struct device *dev)
+static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
.map_size = ARRAY_SIZE(s3c2443_dma_mappings),
};
-static int __init s3c2443_dma_add(struct device *dev)
+static int __init s3c2443_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
return s3c24xx_dma_init_map(&s3c2443_dma_sel);
return 0;
}
-static int __init s3c2443_irq_add(struct device *dev)
+static int __init s3c2443_irq_add(struct device *dev,
+ struct subsys_interface *sif)
{
printk("S3C2443: IRQ Support\n");
.ctrlbit = S3C_CLKCON_PCLK_TSADC,
}, {
.name = "i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+ .devname = "s3c2440-i2c.0",
+#else
+ .devname = "s3c2440-i2c",
+#endif
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_IIC,
/* uart registration process */
-void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
}
}
-static int s5p64x0_pm_add(struct device *dev)
+static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s5p64x0_pm_prepare;
pm_cpu_sleep = s5p64x0_cpu_suspend;
return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
}
-static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
}
}, {
.name = "hdmiphy",
.devname = "s5pv210-hdmi",
- .enable = exynos4_clk_hdmiphy_ctrl,
+ .enable = s5pv210_clk_hdmiphy_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "dacphy",
s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
}
-static int s5pv210_pm_add(struct device *dev)
+static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s5pv210_pm_prepare;
pm_cpu_sleep = s5pv210_cpu_suspend;
#include <linux/serial_sci.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
+#include <linux/videodev2.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
-#include <linux/dma-mapping.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
},
};
-static struct sh_mmcif_dma sh_mmcif_dma = {
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- },
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
-};
static struct sh_mmcif_plat_data sh_mmcif_platdata = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
- .dma = &sh_mmcif_dma,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device mmc_device = {
},
};
-#define DSI0PHYCR 0xe615006c
static int sh_mipi_set_dot_clock(struct platform_device *pdev,
void __iomem *base,
int enable)
{
- struct clk *pck;
+ struct clk *pck, *phy;
int ret;
pck = clk_get(&pdev->dev, "dsip_clk");
goto sh_mipi_set_dot_clock_pck_err;
}
+ phy = clk_get(&pdev->dev, "dsiphy_clk");
+ if (IS_ERR(phy)) {
+ ret = PTR_ERR(phy);
+ goto sh_mipi_set_dot_clock_phy_err;
+ }
+
if (enable) {
clk_set_rate(pck, clk_round_rate(pck, 24000000));
- __raw_writel(0x2a809010, DSI0PHYCR);
+ clk_set_rate(phy, clk_round_rate(pck, 510000000));
clk_enable(pck);
+ clk_enable(phy);
} else {
clk_disable(pck);
+ clk_disable(phy);
}
ret = 0;
+ clk_put(phy);
+sh_mipi_set_dot_clock_phy_err:
clk_put(pck);
-
sh_mipi_set_dot_clock_pck_err:
return ret;
}
},
};
-static struct sh_mmcif_dma sh_mmcif_dma = {
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- },
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
-};
-
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
- .dma = &sh_mmcif_dma,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
static struct gpio_keys_platform_data gpio_key_info = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
- .poll_interval = 250, /* polled for now */
};
static struct platform_device gpio_keys_device = {
- .name = "gpio-keys-polled", /* polled for now */
+ .name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &gpio_key_info,
#include <linux/smsc911x.h>
#include <linux/sh_intc.h>
#include <linux/tca6416_keypad.h>
-#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/dma-mapping.h>
* 1-2 short | VBUS 5V | Host
* open | external VBUS | Function
*
- * *1
- * CN31 is used as
- * CONFIG_USB_R8A66597_HCD Host
- * CONFIG_USB_RENESAS_USBHS Function
- *
* CAUTION
*
* renesas_usbhs driver can use external interrupt mode
* mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
* because Touchscreen is using IRQ7-PORT40.
* It is impossible to use IRQ7 demux on this board.
- *
- * We can use external interrupt mode USB-Function on "USB1".
- * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
- * But don't select both drivers in same time.
- * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
- *
- * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports shared IRQ,
*/
/*
*
*/
+/*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
/*
* FIXME !!
*
* Use J30 to select between Host and Function. This setting
* can however not be detected by software. Hotplug of USBHS1
* is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ * - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ * - J30 "open"
+ * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ * - add .get_vbus = usbhs_get_vbus in usbhs1_private
*/
#define IRQ8 evt2irq(0x0300)
-
-/* USBHS1 USB Host support via r8a66597_hcd */
-static void usb1_host_port_power(int port, int power)
-{
- if (!power) /* only power-on is supported for now */
- return;
-
- /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
- __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
- .on_chip = 1,
- .port_power = usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
- [0] = {
- .name = "USBHS1",
- .start = 0xe68b0000,
- .end = 0xe68b00e6 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb1_host_device = {
- .name = "r8a66597_hcd",
- .id = 1,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb1_host_data,
- },
- .num_resources = ARRAY_SIZE(usb1_host_resources),
- .resource = usb1_host_resources,
-};
-
-/* USBHS1 USB Function support via renesas_usbhs */
-
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
static int usbhs1_get_id(struct platform_device *pdev)
{
- return USBHS_GADGET;
+ return USBHS_HOST;
}
static u32 usbhs1_pipe_cfg[] = {
.hardware_exit = usbhs1_hardware_exit,
.get_id = usbhs1_get_id,
.phy_reset = usbhs_phy_reset,
- .get_vbus = usbhs_get_vbus,
},
.driver_param = {
.buswait_bwait = 4,
},
};
-static struct sh_mmcif_dma sh_mmcif_dma = {
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- },
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
-};
-
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
- .dma = &sh_mmcif_dma,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
&nor_flash_device,
&smc911x_device,
&lcdc_device,
- &usb1_host_device,
&usbhs1_device,
&usbhs0_device,
&leds_device,
gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
gpio_request(GPIO_FN_IDIN_1_113, NULL);
- /* USB phy tweak to make the r8a66597_hcd host driver work */
- __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
-
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
};
+/* DSI DIV */
+static unsigned long dsiphy_recalc(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(clk->mapping->base);
+
+ /* FIXME */
+ if (!(value & 0x000B8000))
+ return clk->parent->rate;
+
+ value &= 0x3f;
+ value += 1;
+
+ if ((value < 12) ||
+ (value > 33)) {
+ pr_err("DSIPHY has wrong value (%d)", value);
+ return 0;
+ }
+
+ return clk->parent->rate / value;
+}
+
+static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk_rate_mult_range_round(clk, 12, 33, rate);
+}
+
+static void dsiphy_disable(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(clk->mapping->base);
+ value &= ~0x000B8000;
+
+ __raw_writel(value , clk->mapping->base);
+}
+
+static int dsiphy_enable(struct clk *clk)
+{
+ u32 value;
+ int multi;
+
+ value = __raw_readl(clk->mapping->base);
+ multi = (value & 0x3f) + 1;
+
+ if ((multi < 12) || (multi > 33))
+ return -EIO;
+
+ __raw_writel(value | 0x000B8000, clk->mapping->base);
+
+ return 0;
+}
+
+static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 value;
+ int idx;
+
+ idx = rate / clk->parent->rate;
+ if ((idx < 12) || (idx > 33))
+ return -EINVAL;
+
+ idx += -1;
+
+ value = __raw_readl(clk->mapping->base);
+ value = (value & ~0x3f) + idx;
+
+ __raw_writel(value, clk->mapping->base);
+
+ return 0;
+}
+
+static struct clk_ops dsiphy_clk_ops = {
+ .recalc = dsiphy_recalc,
+ .round_rate = dsiphy_round_rate,
+ .set_rate = dsiphy_set_rate,
+ .enable = dsiphy_enable,
+ .disable = dsiphy_disable,
+};
+
+static struct clk_mapping dsi0phy_clk_mapping = {
+ .phys = DSI0PHYCR,
+ .len = 4,
+};
+
+static struct clk_mapping dsi1phy_clk_mapping = {
+ .phys = DSI1PHYCR,
+ .len = 4,
+};
+
+static struct clk dsi0phy_clk = {
+ .ops = &dsiphy_clk_ops,
+ .parent = &div6_clks[DIV6_DSI0P], /* late install */
+ .mapping = &dsi0phy_clk_mapping,
+};
+
+static struct clk dsi1phy_clk = {
+ .ops = &dsiphy_clk_ops,
+ .parent = &div6_clks[DIV6_DSI1P], /* late install */
+ .mapping = &dsi1phy_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+ &dsi0phy_clk,
+ &dsi1phy_clk,
+};
+
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
MSTP219,
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+ CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+ CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
if (!ret)
ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+ ret = clk_register(late_main_clks[k]);
+
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
SHDMA_SLAVE_MMCIF_RX,
};
-/* PINT interrupts are located at Linux IRQ 768 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+/* PINT interrupts are located at Linux IRQ 800 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
#endif /* __ASM_SH73A0_H__ */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+ WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
handle_level_irq, "level");
set_irq_flags(n, IRQF_VALID); /* yuck */
FN_AUDATA3, 0, 0, 0 }
},
{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
- 3, 1, 1, 1, 1, 1, 1, 3, 3, 1,
+ 3, 1, 1, 1, 1, 1, 1, 3, 3,
1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
/* IP4_31_29 [3] */
FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <mach/irqs.h>
#include <mach/sh7372.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
{ },
};
+#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
+static struct pinmux_irq pinmux_irqs[] = {
+ PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
+};
+
static struct pinmux_info sh7372_pinmux_info = {
.name = "sh7372_pfc",
.reserved_id = PINMUX_RESERVED,
.gpio_data = pinmux_data,
.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+ .gpio_irq = pinmux_irqs,
+ .gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
};
void sh7372_pinmux_init(void)
.dmaor_is_32bit = 1,
.needs_tend_set = 1,
.no_dmars = 1,
+ .slave_only = 1,
};
static struct resource sh7372_usb_dmae0_resources[] = {
.dmaor_is_32bit = 1,
.needs_tend_set = 1,
.no_dmars = 1,
+ .slave_only = 1,
};
static struct resource sh7372_usb_dmae1_resources[] = {
/* enable cache coherency */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
- if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
+ if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
__raw_writel(1 << cpu, __io(WUPCR)); /* wake up */
else
__raw_writel(1 << cpu, __io(SRESCR)); /* reset */
.uartclk = 216000000,
}, {
/* serial port on mini-pcie */
- .membase = IO_ADDRESS(TEGRA_UARTD_BASE),
- .mapbase = TEGRA_UARTD_BASE,
- .irq = INT_UARTD,
+ .membase = IO_ADDRESS(TEGRA_UARTC_BASE),
+ .mapbase = TEGRA_UARTC_BASE,
+ .irq = INT_UARTC,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
.iotype = UPIO_MEM,
static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
/* name parent rate enabled */
{ "uarta", "pll_p", 216000000, true },
- { "uartd", "pll_p", 216000000, true },
+ { "uartc", "pll_p", 216000000, true },
{ "pll_p_out4", "pll_p", 24000000, true },
{ "usbd", "clk_m", 12000000, false },
/* SDCARD */
#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
+#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PV1
/* ULPI */
#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
#include <linux/list.h>
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-
-struct tegra_dma_req;
-struct tegra_dma_channel;
-
#define TEGRA_DMA_REQ_SEL_CNTR 0
#define TEGRA_DMA_REQ_SEL_I2S_2 1
#define TEGRA_DMA_REQ_SEL_I2S_1 2
#define TEGRA_DMA_REQ_SEL_OWR 25
#define TEGRA_DMA_REQ_SEL_INVALID 31
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
+
+struct tegra_dma_req;
+struct tegra_dma_channel;
+
enum tegra_dma_mode {
TEGRA_DMA_SHARED = 1,
TEGRA_DMA_MODE_CONTINOUS = 2,
config ARM_LPAE
bool "Support for the Large Physical Address Extension"
- depends on MMU && CPU_V7
+ depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
+ !CPU_32v4 && !CPU_32v3
help
Say Y if you have an ARMv7 processor supporting the LPAE page
table format and you would like to access memory beyond the
and r1, r1, #7 @ mask of the bits for current cache only
cmp r1, #2 @ see what cache we have at this level
blt skip @ skip if no cache, or just i-cache
+#ifdef CONFIG_PREEMPT
+ save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic
+#endif
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
isb @ isb to sych the new cssr&csidr
mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
+#ifdef CONFIG_PREEMPT
+ restore_irqs_notrace r9
+#endif
and r2, r1, #7 @ extract the length of the cache lines
add r2, r2, #4 @ add 4 (line length offset)
ldr r4, =0x3ff
if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
continue;
if (__phys_to_pfn(area->phys_addr) > pfn ||
- __pfn_to_phys(pfn) + offset + size-1 >
- area->phys_addr + area->size-1)
+ __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
continue;
/* we can drop the lock here as we know *area is static */
read_unlock(&vmlist_lock);
omap_vram_reserve_sdram_memblock();
omap_dsp_reserve_sdram_memblock();
omap_secure_ram_reserve_memblock();
+ omap_barrier_reserve_memblock();
}
void __init omap_init_consistent_dma_size(void)
#include <linux/types.h>
-#ifdef CONFIG_ARCH_OMAP2PLUS
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
extern int omap_secure_ram_reserve_memblock(void);
#else
static inline void omap_secure_ram_reserve_memblock(void)
{ }
#endif
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
#endif /* __OMAP_SECURE_H__ */
/*****************************************************************************
* EHCI
****************************************************************************/
-static struct orion_ehci_data orion_ehci_data = {
- .phy_version = EHCI_PHY_NA,
-};
-
+static struct orion_ehci_data orion_ehci_data;
static u64 ehci_dmamask = DMA_BIT_MASK(32);
};
void __init orion_ehci_init(unsigned long mapbase,
- unsigned long irq)
+ unsigned long irq,
+ enum orion_ehci_phy_ver phy_version)
{
+ orion_ehci_data.phy_version = phy_version;
fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
irq);
unsigned long irq_1);
void __init orion_ehci_init(unsigned long mapbase,
- unsigned long irq);
+ unsigned long irq,
+ enum orion_ehci_phy_ver phy_version);
void __init orion_ehci_1_init(unsigned long mapbase,
unsigned long irq);
gpio_mode |= GPIO_INPUT_OK;
if (*mpp_list & MPP_OUTPUT_MASK)
gpio_mode |= GPIO_OUTPUT_OK;
- if (sel != 0)
- gpio_mode = 0;
+
orion_gpio_set_valid(num, gpio_mode);
}
{
struct s3c2410_platform_i2c *npd;
- if (!pd)
+ if (!pd) {
pd = &default_i2c_data;
+ pd->bus_num = 0;
+ }
npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
&s3c_device_i2c0);
select HAVE_KPROBES
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
+ select GENERIC_ATOMIC64
select HARDIRQS_SW_RESEND
select GENERIC_IRQ_SHOW
select ARCH_HAVE_NMI_SAFE_CMPXCHG
endif
$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call cmd,dtc)
+ $(call if_changed_dep,dtc)
quiet_cmd_cp = CP $< $@$2
cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
| CF_PAGE_READABLE \
| CF_PAGE_WRITABLE \
| CF_PAGE_EXEC \
- | CF_PAGE_SYSTEM)
+ | CF_PAGE_SYSTEM \
+ | CF_PAGE_SHARED)
#define PAGE_COPY __pgprot(CF_PAGE_VALID \
| CF_PAGE_ACCESSED \
int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
{
- unsigned long flags, mmuar;
+ unsigned long flags, mmuar, mmutr;
struct mm_struct *mm;
pgd_t *pgd;
pmd_t *pmd;
if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
set_pte(pte, pte_wrprotect(*pte));
- mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
- (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
- >> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
+ mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V;
+ if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE))
+ mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT;
+ mmu_write(MMUTR, mmutr);
mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);
movel %sp,%d1 /* get thread_info pointer */
andl #-THREAD_SIZE,%d1 /* at base of kernel stack */
movel %d1,%a0
- movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */
+ moveb %a0@(TINFO_FLAGS+3),%d1 /* thread_info->flags (low 8 bits) */
jne Lwork_to_do /* still work to do */
Lreturn:
btst #TIF_NEED_RESCHED,%d1
jne reschedule
- /* GERG: do we need something here for TRACEing?? */
-
Lsignal_return:
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
depends on HW_HAS_PCI
select PCI_DOMAINS
select GENERIC_PCI_IOMAP
+ select NO_GENERIC_PCI_IOPORT_MAP
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
#include <linux/module.h>
#include <asm/io.h>
-static void __iomem *ioport_map_pci(struct pci_dev *dev,
- unsigned long port, unsigned int nr)
+void __iomem *__pci_ioport_map(struct pci_dev *dev,
+ unsigned long port, unsigned int nr)
{
struct pci_controller *ctrl = dev->bus->sysdata;
unsigned long base = ctrl->io_map_base;
long syscallno; /* Syscall number (used by strace) */
long dummy; /* Cheap alignment fix */
};
-#endif /* __ASSEMBLY__ */
/* TODO: Rename this to REDZONE because that's what it is */
#define STACK_FRAME_OVERHEAD 128 /* size of minimum stack frame */
#define user_stack_pointer(regs) ((unsigned long)(regs)->sp)
#define profile_pc(regs) instruction_pointer(regs)
+static inline long regs_return_value(struct pt_regs *regs)
+{
+ return regs->gpr[11];
+}
+
+#endif /* __ASSEMBLY__ */
+
/*
* Offsets used by 'ptrace' system call interface.
*/
#include <linux/init_task.h>
#include <linux/mqueue.h>
+#include <linux/export.h>
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/kernel_stat.h>
+#include <linux/export.h>
#include <linux/irqflags.h>
*/
ret = -1L;
- /* Are these regs right??? */
- if (unlikely(current->audit_context))
- audit_syscall_entry(audit_arch(), regs->syscallno,
- regs->gpr[3], regs->gpr[4],
- regs->gpr[5], regs->gpr[6]);
+ audit_syscall_entry(audit_arch(), regs->syscallno,
+ regs->gpr[3], regs->gpr[4],
+ regs->gpr[5], regs->gpr[6]);
return ret ? : regs->syscallno;
}
{
int step;
- if (unlikely(current->audit_context))
- audit_syscall_exit(AUDITSC_RESULT(regs->gpr[11]),
- regs->gpr[11]);
+ audit_syscall_exit(regs);
step = test_thread_flag(TIF_SINGLESTEP);
if (step || test_thread_flag(TIF_SYSCALL_TRACE))
UTS_MACHINE := parisc64
CHECKFLAGS += -D__LP64__=1 -m64
WIDTH := 64
+
+# FIXME: if no default set, should really try to locate dynamically
+ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := hppa64-linux-gnu-
+endif
else # 32-bit
WIDTH :=
endif
CONFIG_SCANLOG=m
CONFIG_PPC_SMLPAR=y
CONFIG_DTL=y
-CONFIG_PPC_ISERIES=y
-CONFIG_VIODASD=y
-CONFIG_VIOCD=m
-CONFIG_VIOTAPE=m
CONFIG_PPC_MAPLE=y
CONFIG_PPC_PASEMI=y
CONFIG_PPC_PASEMI_IOMMU=y
CONFIG_MLX4_EN=m
CONFIG_QLGE=m
CONFIG_BE2NET=m
-CONFIG_ISERIES_VETH=m
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
return pdev ? pci_name(pdev) : "<null>";
}
+static inline const char *eeh_driver_name(struct pci_dev *pdev)
+{
+ return (pdev && pdev->driver) ? pdev->driver->name : "<null>";
+}
+
#endif /* CONFIG_EEH */
#else /* CONFIG_PCI */
#ifndef __ASSEMBLY__
-#define instruction_pointer(regs) ((regs)->nip)
-#define user_stack_pointer(regs) ((regs)->gpr[1])
+#define GET_IP(regs) ((regs)->nip)
+#define GET_USP(regs) ((regs)->gpr[1])
+#define GET_FP(regs) (0)
+#define SET_FP(regs, val)
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#define profile_pc profile_pc
+#endif
+
+#include <asm-generic/ptrace.h>
+
#define kernel_stack_pointer(regs) ((regs)->gpr[1])
static inline int is_syscall_success(struct pt_regs *regs)
{
return -regs->gpr[3];
}
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *regs);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-
#ifdef __powerpc64__
#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
#else
stw r3,_TRAP(r1)
2: addi r3,r1,STACK_FRAME_OVERHEAD
mr r4,r9
- bl do_signal
+ bl do_notify_resume
REST_NVGPRS(r1)
b recheck
andi. r0,r4,_TIF_NEED_RESCHED
beq 1f
+ li r5,1
+ TRACE_AND_RESTORE_IRQ(r5);
bl .schedule
b .ret_from_except_lite
1: bl .save_nvgprs
+ li r5,1
+ TRACE_AND_RESTORE_IRQ(r5);
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_signal
+ bl .do_notify_resume
b .ret_from_except
unrecov_restore:
program_check_common:
EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
bl .save_nvgprs
+ DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
bl .program_check_exception
b .ret_from_except
static inline notrace void decrementer_check_overflow(void)
{
u64 now = get_tb_or_rtc();
- u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
+ u64 *next_tb;
+
+ preempt_disable();
+ next_tb = &__get_cpu_var(decrementers_next_tb);
if (now >= *next_tb)
set_dec(1);
+ preempt_enable();
}
notrace void arch_local_irq_restore(unsigned long en)
{
unsigned long flags;
s64 left;
+ unsigned long val;
if (!event->hw.idx || !event->hw.sample_period)
return;
event->hw.state = 0;
left = local64_read(&event->hw.period_left);
- write_pmc(event->hw.idx, left);
+
+ val = 0;
+ if (left < 0x80000000L)
+ val = 0x80000000L - left;
+
+ write_pmc(event->hw.idx, val);
perf_event_update_userpage(event);
perf_pmu_enable(event->pmu);
*/
if (!__kernel_text_address(pc) ||
__get_user(instr, (unsigned int __user *)pc)) {
- printk("XXXXXXXX ");
+ printk(KERN_CONT "XXXXXXXX ");
} else {
if (regs->nip == pc)
- printk("<%08x> ", instr);
+ printk(KERN_CONT "<%08x> ", instr);
else
- printk("%08x ", instr);
+ printk(KERN_CONT "%08x ", instr);
}
pc += sizeof(int);
int cpu;
slb_set_size(SLB_MIN_SIZE);
- stop_topology_update();
printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id());
while (rc == H_MULTI_THREADS_ACTIVE && !atomic_read(&data->done) &&
rc = atomic_read(&data->error);
atomic_set(&data->error, rc);
- start_topology_update();
pSeries_coalesce_init();
if (wake_when_done) {
atomic_set(&data.error, 0);
data.token = rtas_token("ibm,suspend-me");
data.complete = &done;
+ stop_topology_update();
/* Call function on all CPUs. One of us will make the
* rtas call
if (atomic_read(&data.error) != 0)
printk(KERN_ERR "Error doing global join\n");
+ start_topology_update();
+
return atomic_read(&data.error);
}
#else /* CONFIG_PPC_PSERIES */
#include <linux/tracehook.h>
#include <linux/signal.h>
+#include <linux/key.h>
#include <asm/hw_breakpoint.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
}
}
-static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal(struct pt_regs *regs)
{
+ sigset_t *oldset;
siginfo_t info;
int signr;
struct k_sigaction ka;
if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
- else if (!oldset)
+ else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
return ret;
}
-void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
{
if (thread_info_flags & _TIF_SIGPENDING)
- do_signal_pending(NULL, regs);
+ do_signal(regs);
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags);
extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
size_t frame_size, int is_32);
static unsigned int pnv_get_one_msi(struct pnv_phb *phb)
{
- unsigned int id;
+ unsigned long flags;
+ unsigned int id, rc;
+
+ spin_lock_irqsave(&phb->lock, flags);
- spin_lock(&phb->lock);
id = find_next_zero_bit(phb->msi_map, phb->msi_count, phb->msi_next);
if (id >= phb->msi_count && phb->msi_next)
id = find_next_zero_bit(phb->msi_map, phb->msi_count, 0);
if (id >= phb->msi_count) {
- spin_unlock(&phb->lock);
- return 0;
+ rc = 0;
+ goto out;
}
__set_bit(id, phb->msi_map);
- spin_unlock(&phb->lock);
- return id + phb->msi_base;
+ rc = id + phb->msi_base;
+out:
+ spin_unlock_irqrestore(&phb->lock, flags);
+ return rc;
}
static void pnv_put_msi(struct pnv_phb *phb, unsigned int hwirq)
{
+ unsigned long flags;
unsigned int id;
if (WARN_ON(hwirq < phb->msi_base ||
hwirq >= (phb->msi_base + phb->msi_count)))
return;
id = hwirq - phb->msi_base;
- spin_lock(&phb->lock);
+
+ spin_lock_irqsave(&phb->lock, flags);
__clear_bit(id, phb->msi_map);
- spin_unlock(&phb->lock);
+ spin_unlock_irqrestore(&phb->lock, flags);
}
static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
"location=%s driver=%s pci addr=%s\n",
pdn->eeh_check_count, location,
- dev->driver->name, eeh_pci_name(dev));
+ eeh_driver_name(dev), eeh_pci_name(dev));
printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
- dev->driver->name);
+ eeh_driver_name(dev));
dump_stack();
}
goto dn_unlock;
#include <asm/machdep.h>
#include <asm/mmu.h>
#include <asm/rtas.h>
+#include <asm/topology.h>
static u64 stream_id;
static struct device suspend_dev;
ssleep(1);
} while (rc == -EAGAIN);
- if (!rc)
+ if (!rc) {
+ stop_topology_update();
rc = pm_suspend(PM_SUSPEND_MEM);
+ start_topology_update();
+ }
stream_id = 0;
* For the moment only implement delivery to all cpus or one cpu.
* Get current irq_server for the given irq
*/
- ret = cache_hwirq_map(ics, d->irq, cpumask);
+ ret = cache_hwirq_map(ics, hw_irq, cpumask);
if (ret == -1) {
char cpulist[128];
cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
static int __init smp_a2_probe(void)
{
- return cpus_weight(cpu_possible_map);
+ return num_possible_cpus();
}
static struct smp_ops_t a2_smp_ops = {
#define DUMP_REG(x) \
pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x))
-#ifdef CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS
- /* WSP DD1 has a bogus class code by default in the PCI-E
- * root complex's built-in P2P bridge */
+ /*
+ * Some WSP variants has a bogus class code by default in the PCI-E
+ * root complex's built-in P2P bridge
+ */
val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1);
pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val);
out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1,
(val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8));
pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1));
-#endif /* CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS */
#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
/* XXX Disable TCE caching, it doesn't work on DD1 */
void fsl_pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_controller *hose = pci_bus_to_host(bus);
- int i;
-
- if ((bus->parent == hose->bus) &&
- ((fsl_pcie_bus_fixup &&
- early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) ||
- (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)))
- {
- for (i = 0; i < 4; ++i) {
+ int i, is_pcie = 0, no_link;
+
+ /* The root complex bridge comes up with bogus resources,
+ * we copy the PHB ones in.
+ *
+ * With the current generic PCI code, the PHB bus no longer
+ * has bus->resource[0..4] set, so things are a bit more
+ * tricky.
+ */
+
+ if (fsl_pcie_bus_fixup)
+ is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP);
+ no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK);
+
+ if (bus->parent == hose->bus && (is_pcie || no_link)) {
+ for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) {
struct resource *res = bus->resource[i];
- struct resource *par = bus->parent->resource[i];
- if (res) {
- res->start = 0;
- res->end = 0;
- res->flags = 0;
- }
- if (res && par) {
- res->start = par->start;
- res->end = par->end;
- res->flags = par->flags;
- }
+ struct resource *par;
+
+ if (!res)
+ continue;
+ if (i == 0)
+ par = &hose->io_resource;
+ else if (i < 4)
+ par = &hose->mem_resources[i-1];
+ else par = NULL;
+
+ res->start = par ? par->start : 0;
+ res->end = par ? par->end : 0;
+ res->flags = par ? par->flags : 0;
}
}
}
config SYSVIPC_COMPAT
def_bool y if COMPAT && SYSVIPC
+config KEYS_COMPAT
+ def_bool y if COMPAT && KEYS
+
config AUDIT_ARCH
def_bool y
return is_32bit_task();
}
-#else
-
-static inline int is_compat_task(void)
-{
- return 0;
-}
-
#endif
static inline void __user *arch_compat_alloc_user_space(long len)
ENTRY(sys32_poll_wrapper)
llgtr %r2,%r2 # struct pollfd *
llgfr %r3,%r3 # unsigned int
- lgfr %r4,%r4 # long
+ lgfr %r4,%r4 # int
jg sys_poll # branch to system call
ENTRY(sys32_setresgid16_wrapper)
#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/slab.h>
-#include <linux/crash_dump.h>
#include <linux/bootmem.h>
#include <linux/elf.h>
#include <asm/ipl.h>
#include <asm/irq.h>
#include <asm/timer.h>
#include <asm/nmi.h>
-#include <asm/compat.h>
#include <asm/smp.h>
#include "entry.h"
if (test_thread_flag(TIF_MCCK_PENDING)) {
local_mcck_enable();
local_irq_enable();
- s390_handle_mcck();
return;
}
trace_hardirqs_on();
for (;;) {
tick_nohz_idle_enter();
rcu_idle_enter();
- while (!need_resched())
+ while (!need_resched() && !test_thread_flag(TIF_MCCK_PENDING))
default_idle();
rcu_idle_exit();
tick_nohz_idle_exit();
+ if (test_thread_flag(TIF_MCCK_PENDING))
+ s390_handle_mcck();
preempt_enable_no_resched();
schedule();
preempt_disable();
#include <linux/regset.h>
#include <linux/tracehook.h>
#include <linux/seccomp.h>
+#include <linux/compat.h>
#include <trace/syscall.h>
-#include <asm/compat.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <linux/kexec.h>
#include <linux/crash_dump.h>
#include <linux/memory.h>
+#include <linux/compat.h>
#include <asm/ipl.h>
#include <asm/uaccess.h>
#include <asm/ptrace.h>
#include <asm/sections.h>
#include <asm/ebcdic.h>
-#include <asm/compat.h>
#include <asm/kvm_virtio.h>
#include <asm/diag.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/lowcore.h>
-#include <asm/compat.h>
#include "entry.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
static int s390_next_ktime(ktime_t expires,
struct clock_event_device *evt)
{
+ struct timespec ts;
u64 nsecs;
- nsecs = ktime_to_ns(ktime_sub(expires, ktime_get_monotonic_offset()));
+ ts.tv_sec = ts.tv_nsec = 0;
+ monotonic_to_bootbased(&ts);
+ nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
do_div(nsecs, 125);
- S390_lowcore.clock_comparator = TOD_UNIX_EPOCH + (nsecs << 9);
+ S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
set_clock_comparator(S390_lowcore.clock_comparator);
return 0;
}
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
-#include <asm/compat.h>
#include "../kernel/entry.h"
#ifndef CONFIG_64BIT
#ifdef CONFIG_MEMORY_HOTPLUG
int arch_add_memory(int nid, u64 start, u64 size)
{
- struct pglist_data *pgdat;
+ unsigned long zone_start_pfn, zone_end_pfn, nr_pages;
+ unsigned long start_pfn = PFN_DOWN(start);
+ unsigned long size_pages = PFN_DOWN(size);
struct zone *zone;
int rc;
- pgdat = NODE_DATA(nid);
- zone = pgdat->node_zones + ZONE_MOVABLE;
rc = vmem_add_mapping(start, size);
if (rc)
return rc;
- rc = __add_pages(nid, zone, PFN_DOWN(start), PFN_DOWN(size));
+ for_each_zone(zone) {
+ if (zone_idx(zone) != ZONE_MOVABLE) {
+ /* Add range within existing zone limits */
+ zone_start_pfn = zone->zone_start_pfn;
+ zone_end_pfn = zone->zone_start_pfn +
+ zone->spanned_pages;
+ } else {
+ /* Add remaining range to ZONE_MOVABLE */
+ zone_start_pfn = start_pfn;
+ zone_end_pfn = start_pfn + size_pages;
+ }
+ if (start_pfn < zone_start_pfn || start_pfn >= zone_end_pfn)
+ continue;
+ nr_pages = (start_pfn + size_pages > zone_end_pfn) ?
+ zone_end_pfn - start_pfn : size_pages;
+ rc = __add_pages(nid, zone, start_pfn, nr_pages);
+ if (rc)
+ break;
+ start_pfn += nr_pages;
+ size_pages -= nr_pages;
+ if (!size_pages)
+ break;
+ }
if (rc)
vmem_remove_mapping(start, size);
return rc;
#include <linux/mman.h>
#include <linux/module.h>
#include <linux/random.h>
+#include <linux/compat.h>
#include <asm/pgalloc.h>
-#include <asm/compat.h>
static unsigned long stack_maxrandom_size(void)
{
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
mp = (struct gmap_pgtable *) page->index;
BUG_ON(!list_empty(&mp->mapper));
- pgtable_page_ctor(page);
+ pgtable_page_dtor(page);
atomic_set(&page->_mapcount, -1);
kfree(mp);
__free_page(page);
depends on SYS_SUPPORTS_PCI
select PCI_DOMAINS
select GENERIC_PCI_IOMAP
+ select NO_GENERIC_PCI_IOPORT_MAP
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
.start = 0xfee00800,
.end = 0xfee00fff,
.flags = IORESOURCE_MEM,
+ }, {
+ /* TSU */
+ .start = 0xfee01800,
+ .end = 0xfee01fff,
+ .flags = IORESOURCE_MEM,
}, {
.start = 316,
.end = 316,
},
};
-static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- }
-};
-
static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .dma = &sh7757lcr_mmcif_dma,
.sup_pclk = 0x0f,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NONREMOVABLE,
.ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
#include <linux/i2c.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
+#include <linux/videodev2.h>
#include <media/ov772x.h>
#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/sh_eth.h>
+#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <sound/sh_fsi.h>
#include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
#include <media/tw9910.h>
#include <media/mt9t112.h>
#include <asm/heartbeat.h>
#include <linux/input/sh_keysc.h>
#include <linux/i2c.h>
#include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
#include <media/rj54n1cb0c.h>
#include <media/soc_camera.h>
#include <media/sh_mobile_ceu.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <media/ov772x.h>
+#include <media/soc_camera.h>
#include <media/tw9910.h>
#include <asm/clock.h>
#include <asm/machvec.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
#include <linux/sh_eth.h>
+#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <sound/sh_fsi.h>
{ SH4_PCIINT_MLCK, "master lock error" },
{ SH4_PCIINT_TABT, "target-target abort" },
{ SH4_PCIINT_TRET, "target retry time out" },
- { SH4_PCIINT_MFDE, "master function disable erorr" },
+ { SH4_PCIINT_MFDE, "master function disable error" },
{ SH4_PCIINT_PRTY, "address parity error" },
{ SH4_PCIINT_SERR, "SERR" },
{ SH4_PCIINT_TWDP, "data parity error for target write" },
#ifndef CONFIG_GENERIC_IOMAP
-static void __iomem *ioport_map_pci(struct pci_dev *dev,
- unsigned long port, unsigned int nr)
+void __iomem *__pci_ioport_map(struct pci_dev *dev,
+ unsigned long port, unsigned int nr)
{
struct pci_channel *chan = dev->sysdata;
*
* This file is released under the GPLv2
*/
+#ifndef __ASM_SH_DEVICE_H
+#define __ASM_SH_DEVICE_H
-struct dev_archdata {
-};
+#include <asm-generic/device.h>
struct platform_device;
/* allocate contiguous memory chunk and fill in struct resource */
void plat_early_device_setup(void);
-struct pdev_archdata {
-};
+#endif /* __ASM_SH_DEVICE_H */
CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]),
CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
- CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]),
+ CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),
[0] = {
.start = 0xfe002000,
.end = 0xfe0020ff,
- .flags = IORESOURCE_MEM,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
},
[1] = {
.start = 86,
.resource = spi0_resources,
};
+static struct resource spi1_resources[] = {
+ {
+ .start = 0xffd8ee70,
+ .end = 0xffd8eeff,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+ },
+ {
+ .start = 54,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device spi1_device = {
+ .name = "sh_spi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+ .resource = spi1_resources,
+};
+
static struct resource usb_ehci_resources[] = {
[0] = {
.start = 0xfe4f1000,
&dma2_device,
&dma3_device,
&spi0_device,
+ &spi1_device,
&usb_ehci_device,
&usb_ohci_device,
};
mp_ops->prepare_cpus(max_cpus);
#ifndef CONFIG_HOTPLUG_CPU
- init_cpu_present(&cpu_possible_map);
+ init_cpu_present(cpu_possible_mask);
#endif
}
* Presently all SH-X3 SMP cores are multi-cores, so just keep it
* simple until we have a method for determining topology..
*/
- return cpu_possible_map;
+ return *cpu_possible_mask;
}
const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
#define MAX_OCACHE_PAGES 32
#define MAX_ICACHE_PAGES 32
+#ifdef CONFIG_CACHE_WRITEBACK
static void sh2a_flush_oc_line(unsigned long v, int way)
{
unsigned long addr = (v & 0x000007f0) | (way << 11);
__raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
}
}
+#endif
static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
{
extern void fpu_init(void);
extern void mxcsr_feature_mask_init(void);
extern int init_fpu(struct task_struct *child);
-extern asmlinkage void math_state_restore(void);
-extern void __math_state_restore(void);
+extern void math_state_restore(void);
extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
+DECLARE_PER_CPU(struct task_struct *, fpu_owner_task);
+
extern user_regset_active_fn fpregs_active, xfpregs_active;
extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
xstateregs_get;
#endif /* CONFIG_X86_64 */
-/* We need a safe address that is cheap to find and that is already
- in L1 during context switch. The best choices are unfortunately
- different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (__get_cpu_var(kernel_cpustat).cpustat[CPUTIME_USER])
-#endif
-
/*
- * These must be called with preempt disabled
+ * These must be called with preempt disabled. Returns
+ * 'true' if the FPU state is still intact.
*/
-static inline void fpu_save_init(struct fpu *fpu)
+static inline int fpu_save_init(struct fpu *fpu)
{
if (use_xsave()) {
fpu_xsave(fpu);
* xsave header may indicate the init state of the FP.
*/
if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP))
- return;
+ return 1;
} else if (use_fxsr()) {
fpu_fxsave(fpu);
} else {
asm volatile("fnsave %[fx]; fwait"
: [fx] "=m" (fpu->state->fsave));
- return;
+ return 0;
}
- if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES))
+ /*
+ * If exceptions are pending, we need to clear them so
+ * that we don't randomly get exceptions later.
+ *
+ * FIXME! Is this perhaps only true for the old-style
+ * irq13 case? Maybe we could leave the x87 state
+ * intact otherwise?
+ */
+ if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) {
asm volatile("fnclex");
-
- /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. safe_address is a random variable that should be in L1 */
- alternative_input(
- ASM_NOP8 ASM_NOP2,
- "emms\n\t" /* clear stack tags */
- "fildl %P[addr]", /* set F?P to defined value */
- X86_FEATURE_FXSAVE_LEAK,
- [addr] "m" (safe_address));
+ return 0;
+ }
+ return 1;
}
-static inline void __save_init_fpu(struct task_struct *tsk)
+static inline int __save_init_fpu(struct task_struct *tsk)
{
- fpu_save_init(&tsk->thread.fpu);
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
+ return fpu_save_init(&tsk->thread.fpu);
}
static inline int fpu_fxrstor_checking(struct fpu *fpu)
static inline int restore_fpu_checking(struct task_struct *tsk)
{
+ /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+ is pending. Clear the x87 state here by setting it to fixed
+ values. "m" is a random variable that should be in L1 */
+ alternative_input(
+ ASM_NOP8 ASM_NOP2,
+ "emms\n\t" /* clear stack tags */
+ "fildl %P[addr]", /* set F?P to defined value */
+ X86_FEATURE_FXSAVE_LEAK,
+ [addr] "m" (tsk->thread.fpu.has_fpu));
+
return fpu_restore_checking(&tsk->thread.fpu);
}
/*
- * Signal frame handlers...
+ * Software FPU state helpers. Careful: these need to
+ * be preemption protection *and* they need to be
+ * properly paired with the CR0.TS changes!
*/
-extern int save_i387_xstate(void __user *buf);
-extern int restore_i387_xstate(void __user *buf);
+static inline int __thread_has_fpu(struct task_struct *tsk)
+{
+ return tsk->thread.fpu.has_fpu;
+}
-static inline void __unlazy_fpu(struct task_struct *tsk)
+/* Must be paired with an 'stts' after! */
+static inline void __thread_clear_has_fpu(struct task_struct *tsk)
{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- __save_init_fpu(tsk);
- stts();
- } else
- tsk->fpu_counter = 0;
+ tsk->thread.fpu.has_fpu = 0;
+ percpu_write(fpu_owner_task, NULL);
+}
+
+/* Must be paired with a 'clts' before! */
+static inline void __thread_set_has_fpu(struct task_struct *tsk)
+{
+ tsk->thread.fpu.has_fpu = 1;
+ percpu_write(fpu_owner_task, tsk);
+}
+
+/*
+ * Encapsulate the CR0.TS handling together with the
+ * software flag.
+ *
+ * These generally need preemption protection to work,
+ * do try to avoid using these on their own.
+ */
+static inline void __thread_fpu_end(struct task_struct *tsk)
+{
+ __thread_clear_has_fpu(tsk);
+ stts();
+}
+
+static inline void __thread_fpu_begin(struct task_struct *tsk)
+{
+ clts();
+ __thread_set_has_fpu(tsk);
+}
+
+/*
+ * FPU state switching for scheduling.
+ *
+ * This is a two-stage process:
+ *
+ * - switch_fpu_prepare() saves the old state and
+ * sets the new state of the CR0.TS bit. This is
+ * done within the context of the old process.
+ *
+ * - switch_fpu_finish() restores the new state as
+ * necessary.
+ */
+typedef struct { int preload; } fpu_switch_t;
+
+/*
+ * FIXME! We could do a totally lazy restore, but we need to
+ * add a per-cpu "this was the task that last touched the FPU
+ * on this CPU" variable, and the task needs to have a "I last
+ * touched the FPU on this CPU" and check them.
+ *
+ * We don't do that yet, so "fpu_lazy_restore()" always returns
+ * false, but some day..
+ */
+static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
+{
+ return new == percpu_read_stable(fpu_owner_task) &&
+ cpu == new->thread.fpu.last_cpu;
+}
+
+static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu)
+{
+ fpu_switch_t fpu;
+
+ fpu.preload = tsk_used_math(new) && new->fpu_counter > 5;
+ if (__thread_has_fpu(old)) {
+ if (!__save_init_fpu(old))
+ cpu = ~0;
+ old->thread.fpu.last_cpu = cpu;
+ old->thread.fpu.has_fpu = 0; /* But leave fpu_owner_task! */
+
+ /* Don't change CR0.TS if we just switch! */
+ if (fpu.preload) {
+ new->fpu_counter++;
+ __thread_set_has_fpu(new);
+ prefetch(new->thread.fpu.state);
+ } else
+ stts();
+ } else {
+ old->fpu_counter = 0;
+ old->thread.fpu.last_cpu = ~0;
+ if (fpu.preload) {
+ new->fpu_counter++;
+ if (fpu_lazy_restore(new, cpu))
+ fpu.preload = 0;
+ else
+ prefetch(new->thread.fpu.state);
+ __thread_fpu_begin(new);
+ }
+ }
+ return fpu;
+}
+
+/*
+ * By the time this gets called, we've already cleared CR0.TS and
+ * given the process the FPU if we are going to preload the FPU
+ * state - all we need to do is to conditionally restore the register
+ * state itself.
+ */
+static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu)
+{
+ if (fpu.preload) {
+ if (unlikely(restore_fpu_checking(new)))
+ __thread_fpu_end(new);
+ }
}
+/*
+ * Signal frame handlers...
+ */
+extern int save_i387_xstate(void __user *buf);
+extern int restore_i387_xstate(void __user *buf);
+
static inline void __clear_fpu(struct task_struct *tsk)
{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ if (__thread_has_fpu(tsk)) {
/* Ignore delayed exceptions from user space */
asm volatile("1: fwait\n"
"2:\n"
_ASM_EXTABLE(1b, 2b));
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
+ __thread_fpu_end(tsk);
}
}
+/*
+ * Were we in an interrupt that interrupted kernel mode?
+ *
+ * We can do a kernel_fpu_begin/end() pair *ONLY* if that
+ * pair does nothing at all: the thread must not have fpu (so
+ * that we don't try to save the FPU state), and TS must
+ * be set (so that the clts/stts pair does nothing that is
+ * visible in the interrupted kernel thread).
+ */
+static inline bool interrupted_kernel_fpu_idle(void)
+{
+ return !__thread_has_fpu(current) &&
+ (read_cr0() & X86_CR0_TS);
+}
+
+/*
+ * Were we in user mode (or vm86 mode) when we were
+ * interrupted?
+ *
+ * Doing kernel_fpu_begin/end() is ok if we are running
+ * in an interrupt context from user mode - we'll just
+ * save the FPU state as required.
+ */
+static inline bool interrupted_user_mode(void)
+{
+ struct pt_regs *regs = get_irq_regs();
+ return regs && user_mode_vm(regs);
+}
+
+/*
+ * Can we use the FPU in kernel mode with the
+ * whole "kernel_fpu_begin/end()" sequence?
+ *
+ * It's always ok in process context (ie "not interrupt")
+ * but it is sometimes ok even from an irq.
+ */
+static inline bool irq_fpu_usable(void)
+{
+ return !in_interrupt() ||
+ interrupted_user_mode() ||
+ interrupted_kernel_fpu_idle();
+}
+
static inline void kernel_fpu_begin(void)
{
- struct thread_info *me = current_thread_info();
+ struct task_struct *me = current;
+
+ WARN_ON_ONCE(!irq_fpu_usable());
preempt_disable();
- if (me->status & TS_USEDFPU)
- __save_init_fpu(me->task);
- else
+ if (__thread_has_fpu(me)) {
+ __save_init_fpu(me);
+ __thread_clear_has_fpu(me);
+ /* We do 'stts()' in kernel_fpu_end() */
+ } else {
+ percpu_write(fpu_owner_task, NULL);
clts();
+ }
}
static inline void kernel_fpu_end(void)
preempt_enable();
}
-static inline bool irq_fpu_usable(void)
-{
- struct pt_regs *regs;
-
- return !in_interrupt() || !(regs = get_irq_regs()) || \
- user_mode(regs) || (read_cr0() & X86_CR0_TS);
-}
-
/*
* Some instructions like VIA's padlock instructions generate a spurious
* DNA fault but don't modify SSE registers. And these instructions
stts();
}
+/*
+ * The question "does this thread have fpu access?"
+ * is slightly racy, since preemption could come in
+ * and revoke it immediately after the test.
+ *
+ * However, even in that very unlikely scenario,
+ * we can just assume we have FPU access - typically
+ * to save the FP state - we'll just take a #NM
+ * fault and get the FPU access back.
+ *
+ * The actual user_fpu_begin/end() functions
+ * need to be preemption-safe, though.
+ *
+ * NOTE! user_fpu_end() must be used only after you
+ * have saved the FP state, and user_fpu_begin() must
+ * be used only immediately before restoring it.
+ * These functions do not do any save/restore on
+ * their own.
+ */
+static inline int user_has_fpu(void)
+{
+ return __thread_has_fpu(current);
+}
+
+static inline void user_fpu_end(void)
+{
+ preempt_disable();
+ __thread_fpu_end(current);
+ preempt_enable();
+}
+
+static inline void user_fpu_begin(void)
+{
+ preempt_disable();
+ if (!user_has_fpu())
+ __thread_fpu_begin(current);
+ preempt_enable();
+}
+
/*
* These disable preemption on their own and are safe
*/
static inline void save_init_fpu(struct task_struct *tsk)
{
+ WARN_ON_ONCE(!__thread_has_fpu(tsk));
preempt_disable();
__save_init_fpu(tsk);
- stts();
+ __thread_fpu_end(tsk);
preempt_enable();
}
static inline void unlazy_fpu(struct task_struct *tsk)
{
preempt_disable();
- __unlazy_fpu(tsk);
+ if (__thread_has_fpu(tsk)) {
+ __save_init_fpu(tsk);
+ __thread_fpu_end(tsk);
+ } else
+ tsk->fpu_counter = 0;
preempt_enable();
}
int (*intercept)(struct x86_emulate_ctxt *ctxt,
struct x86_instruction_info *info,
enum x86_intercept_stage stage);
+
+ bool (*get_cpuid)(struct x86_emulate_ctxt *ctxt,
+ u32 *eax, u32 *ebx, u32 *ecx, u32 *edx);
};
typedef u32 __attribute__((vector_size(16))) sse128_t;
#define X86EMUL_MODE_PROT (X86EMUL_MODE_PROT16|X86EMUL_MODE_PROT32| \
X86EMUL_MODE_PROT64)
+/* CPUID vendors */
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx 0x68747541
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx 0x444d4163
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_edx 0x69746e65
+
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx 0x69444d41
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx 0x21726574
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_edx 0x74656273
+
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_ebx 0x756e6547
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_ecx 0x6c65746e
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_edx 0x49656e69
+
enum x86_intercept_stage {
X86_ICTP_NONE = 0, /* Allow zero-init to not match anything */
X86_ICPT_PRE_EXCEPT,
static inline void perf_events_lapic_init(void) { }
#endif
+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD)
+ extern void amd_pmu_enable_virt(void);
+ extern void amd_pmu_disable_virt(void);
+#else
+ static inline void amd_pmu_enable_virt(void) { }
+ static inline void amd_pmu_disable_virt(void) { }
+#endif
+
#endif /* _ASM_X86_PERF_EVENT_H */
};
struct fpu {
+ unsigned int last_cpu;
+ unsigned int has_fpu;
union thread_xstate *state;
};
* ever touches our thread-synchronous status, so we don't
* have to worry about atomic accesses.
*/
-#define TS_USEDFPU 0x0001 /* FPU was used by this task
- this quantum (SMP) */
#define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/
#define TS_POLLING 0x0004 /* idle task polling need_resched,
skip sending interrupt */
DEFINE_PER_CPU(unsigned int, irq_count) = -1;
+DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
+EXPORT_PER_CPU_SYMBOL(fpu_owner_task);
+
/*
* Special IST stacks which the CPU switches to when it calls
* an IST-marked descriptor entry. Up to 7 stacks (hardware
DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
EXPORT_PER_CPU_SYMBOL(current_task);
+DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
+EXPORT_PER_CPU_SYMBOL(fpu_owner_task);
#ifdef CONFIG_CC_STACKPROTECTOR
DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1;
}
-static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf,
- int index)
+static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, int index)
{
int node;
#define CPUID4_INFO_IDX(x, y) (&((per_cpu(ici_cpuid4_info, x))[y]))
#ifdef CONFIG_SMP
-static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+
+static int __cpuinit cache_shared_amd_cpu_map_setup(unsigned int cpu, int index)
{
- struct _cpuid4_info *this_leaf, *sibling_leaf;
- unsigned long num_threads_sharing;
- int index_msb, i, sibling;
+ struct _cpuid4_info *this_leaf;
+ int ret, i, sibling;
struct cpuinfo_x86 *c = &cpu_data(cpu);
- if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) {
+ ret = 0;
+ if (index == 3) {
+ ret = 1;
for_each_cpu(i, cpu_llc_shared_mask(cpu)) {
if (!per_cpu(ici_cpuid4_info, i))
continue;
set_bit(sibling, this_leaf->shared_cpu_map);
}
}
- return;
+ } else if ((c->x86 == 0x15) && ((index == 1) || (index == 2))) {
+ ret = 1;
+ for_each_cpu(i, cpu_sibling_mask(cpu)) {
+ if (!per_cpu(ici_cpuid4_info, i))
+ continue;
+ this_leaf = CPUID4_INFO_IDX(i, index);
+ for_each_cpu(sibling, cpu_sibling_mask(cpu)) {
+ if (!cpu_online(sibling))
+ continue;
+ set_bit(sibling, this_leaf->shared_cpu_map);
+ }
+ }
}
+
+ return ret;
+}
+
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+{
+ struct _cpuid4_info *this_leaf, *sibling_leaf;
+ unsigned long num_threads_sharing;
+ int index_msb, i;
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+ if (c->x86_vendor == X86_VENDOR_AMD) {
+ if (cache_shared_amd_cpu_map_setup(cpu, index))
+ return;
+ }
+
this_leaf = CPUID4_INFO_IDX(cpu, index);
num_threads_sharing = 1 + this_leaf->base.eax.split.num_threads_sharing;
sprintf(name, "threshold_bank%i", bank);
+#ifdef CONFIG_SMP
if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */
i = cpumask_first(cpu_llc_shared_mask(cpu));
goto out;
}
+#endif
b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL);
if (!b) {
/*
* AMD specific bits
*/
- struct amd_nb *amd_nb;
+ struct amd_nb *amd_nb;
+ /* Inverted mask of bits to clear in the perf_ctr ctrl registers */
+ u64 perf_ctr_virt_mask;
void *kfree_on_online;
};
static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc,
u64 enable_mask)
{
+ u64 disable_mask = __this_cpu_read(cpu_hw_events.perf_ctr_virt_mask);
+
if (hwc->extra_reg.reg)
wrmsrl(hwc->extra_reg.reg, hwc->extra_reg.config);
- wrmsrl(hwc->config_base, hwc->config | enable_mask);
+ wrmsrl(hwc->config_base, (hwc->config | enable_mask) & ~disable_mask);
}
void x86_pmu_enable_all(int added);
#include <linux/perf_event.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/slab.h>
struct amd_nb *nb;
int i, nb_id;
- if (boot_cpu_data.x86_max_cores < 2)
+ cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
+
+ if (boot_cpu_data.x86_max_cores < 2 || boot_cpu_data.x86 == 0x15)
return;
nb_id = amd_get_nb_id(cpu);
.put_event_constraints = amd_put_event_constraints,
.cpu_prepare = amd_pmu_cpu_prepare,
- .cpu_starting = amd_pmu_cpu_starting,
.cpu_dead = amd_pmu_cpu_dead,
#endif
+ .cpu_starting = amd_pmu_cpu_starting,
};
__init int amd_pmu_init(void)
return 0;
}
+
+void amd_pmu_enable_virt(void)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+ cpuc->perf_ctr_virt_mask = 0;
+
+ /* Reload all events */
+ x86_pmu_disable_all();
+ x86_pmu_enable_all(0);
+}
+EXPORT_SYMBOL_GPL(amd_pmu_enable_virt);
+
+void amd_pmu_disable_virt(void)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+ /*
+ * We only mask out the Host-only bit so that host-only counting works
+ * when SVM is disabled. If someone sets up a guest-only counter when
+ * SVM is disabled the Guest-only bits still gets set and the counter
+ * will not count anything.
+ */
+ cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
+
+ /* Reload all events */
+ x86_pmu_disable_all();
+ x86_pmu_enable_all(0);
+}
+EXPORT_SYMBOL_GPL(amd_pmu_disable_virt);
hwc->config &= ~ARCH_PERFMON_EVENTSEL_INT;
cpuc->pebs_enabled |= 1ULL << hwc->idx;
- WARN_ON_ONCE(cpuc->enabled);
if (x86_pmu.intel_cap.pebs_trap && event->attr.precise_ip > 1)
intel_pmu_lbr_enable(event);
if (!x86_pmu.lbr_nr)
return;
- WARN_ON_ONCE(cpuc->enabled);
-
/*
* Reset the LBR stack if we changed task context to
* avoid data leaks.
/* Use %rdx as out temp variable throughout */
pushq_cfi %rdx
+ /*
+ * If %cs was not the kernel segment, then the NMI triggered in user
+ * space, which means it is definitely not nested.
+ */
+ cmpl $__KERNEL_CS, 16(%rsp)
+ jne first_nmi
+
/*
* Check the special variable on the stack to see if NMIs are
* executing.
*/
- cmp $1, -8(%rsp)
+ cmpl $1, -8(%rsp)
je nested_nmi
/*
static enum ucode_state
request_microcode_user(int cpu, const void __user *buf, size_t size)
{
- pr_info("AMD microcode update via /dev/cpu/microcode not supported\n");
return UCODE_ERROR;
}
task_user_gs(p) = get_user_gs(regs);
+ p->fpu_counter = 0;
p->thread.io_bitmap_ptr = NULL;
tsk = current;
err = -ENOMEM;
*next = &next_p->thread;
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
- bool preload_fpu;
+ fpu_switch_t fpu;
/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
- /*
- * If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- */
- preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
- __unlazy_fpu(prev_p);
-
- /* we're going to use this soon, after a few expensive things */
- if (preload_fpu)
- prefetch(next->fpu.state);
+ fpu = switch_fpu_prepare(prev_p, next_p, cpu);
/*
* Reload esp0.
task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
__switch_to_xtra(prev_p, next_p, tss);
- /* If we're going to preload the fpu context, make sure clts
- is run while we're batching the cpu state updates. */
- if (preload_fpu)
- clts();
-
/*
* Leave lazy mode, flushing any hypercalls made here.
* This must be done before restoring TLS segments so
*/
arch_end_context_switch(next_p);
- if (preload_fpu)
- __math_state_restore();
-
/*
* Restore %gs if needed (which is common)
*/
if (prev->gs | next->gs)
lazy_load_gs(next->gs);
+ switch_fpu_finish(next_p, fpu);
+
percpu_write(current_task, next_p);
return prev_p;
set_tsk_thread_flag(p, TIF_FORK);
+ p->fpu_counter = 0;
p->thread.io_bitmap_ptr = NULL;
savesegment(gs, p->thread.gsindex);
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
unsigned fsindex, gsindex;
- bool preload_fpu;
+ fpu_switch_t fpu;
- /*
- * If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- */
- preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
- /* we're going to use this soon, after a few expensive things */
- if (preload_fpu)
- prefetch(next->fpu.state);
+ fpu = switch_fpu_prepare(prev_p, next_p, cpu);
/*
* Reload esp0, LDT and the page table pointer:
load_TLS(next, cpu);
- /* Must be after DS reload */
- __unlazy_fpu(prev_p);
-
- /* Make sure cpu is ready for new context */
- if (preload_fpu)
- clts();
-
/*
* Leave lazy mode, flushing any hypercalls made here.
* This must be done before restoring TLS segments so
wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
prev->gsindex = gsindex;
+ switch_fpu_finish(next_p, fpu);
+
/*
* Switch the PDA and FPU contexts.
*/
task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
__switch_to_xtra(prev_p, next_p, tss);
- /*
- * Preload the FPU context, now that we've determined that the
- * task is likely to be using it.
- */
- if (preload_fpu)
- __math_state_restore();
-
return prev_p;
}
{
}
-/*
- * __math_state_restore assumes that cr0.TS is already clear and the
- * fpu state is all ready for use. Used during context switch.
- */
-void __math_state_restore(void)
-{
- struct thread_info *thread = current_thread_info();
- struct task_struct *tsk = thread->task;
-
- /*
- * Paranoid restore. send a SIGSEGV if we fail to restore the state.
- */
- if (unlikely(restore_fpu_checking(tsk))) {
- stts();
- force_sig(SIGSEGV, tsk);
- return;
- }
-
- thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */
- tsk->fpu_counter++;
-}
-
/*
* 'math_state_restore()' saves the current math information in the
* old math state array, and gets the new ones from the current task
* Careful.. There are problems with IBM-designed IRQ13 behaviour.
* Don't touch unless you *really* know how it works.
*
- * Must be called with kernel preemption disabled (in this case,
- * local interrupts are disabled at the call-site in entry.S).
+ * Must be called with kernel preemption disabled (eg with local
+ * local interrupts as in the case of do_device_not_available).
*/
-asmlinkage void math_state_restore(void)
+void math_state_restore(void)
{
- struct thread_info *thread = current_thread_info();
- struct task_struct *tsk = thread->task;
+ struct task_struct *tsk = current;
if (!tsk_used_math(tsk)) {
local_irq_enable();
local_irq_disable();
}
- clts(); /* Allow maths ops (or we recurse) */
+ __thread_fpu_begin(tsk);
+ /*
+ * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+ */
+ if (unlikely(restore_fpu_checking(tsk))) {
+ __thread_fpu_end(tsk);
+ force_sig(SIGSEGV, tsk);
+ return;
+ }
- __math_state_restore();
+ tsk->fpu_counter++;
}
EXPORT_SYMBOL_GPL(math_state_restore);
if (!fx)
return;
- BUG_ON(task_thread_info(tsk)->status & TS_USEDFPU);
+ BUG_ON(__thread_has_fpu(tsk));
xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv;
if (!used_math())
return 0;
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ if (user_has_fpu()) {
if (use_xsave())
err = xsave_user(buf);
else
if (err)
return err;
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
+ user_fpu_end();
} else {
sanitize_i387_state(tsk);
if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave,
return err;
}
- if (!(task_thread_info(current)->status & TS_USEDFPU)) {
- clts();
- task_thread_info(current)->status |= TS_USEDFPU;
- }
+ user_fpu_begin();
if (use_xsave())
err = restore_user_xstate(buf);
else
ss->p = 1;
}
+static bool em_syscall_is_enabled(struct x86_emulate_ctxt *ctxt)
+{
+ struct x86_emulate_ops *ops = ctxt->ops;
+ u32 eax, ebx, ecx, edx;
+
+ /*
+ * syscall should always be enabled in longmode - so only become
+ * vendor specific (cpuid) if other modes are active...
+ */
+ if (ctxt->mode == X86EMUL_MODE_PROT64)
+ return true;
+
+ eax = 0x00000000;
+ ecx = 0x00000000;
+ if (ops->get_cpuid(ctxt, &eax, &ebx, &ecx, &edx)) {
+ /*
+ * Intel ("GenuineIntel")
+ * remark: Intel CPUs only support "syscall" in 64bit
+ * longmode. Also an 64bit guest with a
+ * 32bit compat-app running will #UD !! While this
+ * behaviour can be fixed (by emulating) into AMD
+ * response - CPUs of AMD can't behave like Intel.
+ */
+ if (ebx == X86EMUL_CPUID_VENDOR_GenuineIntel_ebx &&
+ ecx == X86EMUL_CPUID_VENDOR_GenuineIntel_ecx &&
+ edx == X86EMUL_CPUID_VENDOR_GenuineIntel_edx)
+ return false;
+
+ /* AMD ("AuthenticAMD") */
+ if (ebx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx &&
+ ecx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx &&
+ edx == X86EMUL_CPUID_VENDOR_AuthenticAMD_edx)
+ return true;
+
+ /* AMD ("AMDisbetter!") */
+ if (ebx == X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx &&
+ ecx == X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx &&
+ edx == X86EMUL_CPUID_VENDOR_AMDisbetterI_edx)
+ return true;
+ }
+
+ /* default: (not Intel, not AMD), apply Intel's stricter rules... */
+ return false;
+}
+
static int em_syscall(struct x86_emulate_ctxt *ctxt)
{
struct x86_emulate_ops *ops = ctxt->ops;
ctxt->mode == X86EMUL_MODE_VM86)
return emulate_ud(ctxt);
+ if (!(em_syscall_is_enabled(ctxt)))
+ return emulate_ud(ctxt);
+
ops->get_msr(ctxt, MSR_EFER, &efer);
setup_syscalls_segments(ctxt, &cs, &ss);
+ if (!(efer & EFER_SCE))
+ return emulate_ud(ctxt);
+
ops->get_msr(ctxt, MSR_STAR, &msr_data);
msr_data >>= 32;
cs_sel = (u16)(msr_data & 0xfffc);
#include <linux/ftrace_event.h>
#include <linux/slab.h>
+#include <asm/perf_event.h>
#include <asm/tlbflush.h>
#include <asm/desc.h>
#include <asm/kvm_para.h>
wrmsrl(MSR_AMD64_TSC_RATIO, TSC_RATIO_DEFAULT);
cpu_svm_disable();
+
+ amd_pmu_disable_virt();
}
static int svm_hardware_enable(void *garbage)
svm_init_erratum_383();
+ amd_pmu_enable_virt();
+
return 0;
}
#ifdef CONFIG_X86_64
wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
#endif
- if (current_thread_info()->status & TS_USEDFPU)
+ if (__thread_has_fpu(current))
clts();
load_gdt(&__get_cpu_var(host_gdt));
}
int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
{
+ bool pr = false;
+
switch (msr) {
case MSR_EFER:
return set_efer(vcpu, data);
pr_unimpl(vcpu, "unimplemented perfctr wrmsr: "
"0x%x data 0x%llx\n", msr, data);
break;
+ case MSR_P6_PERFCTR0:
+ case MSR_P6_PERFCTR1:
+ pr = true;
+ case MSR_P6_EVNTSEL0:
+ case MSR_P6_EVNTSEL1:
+ if (kvm_pmu_msr(vcpu, msr))
+ return kvm_pmu_set_msr(vcpu, msr, data);
+
+ if (pr || data != 0)
+ pr_unimpl(vcpu, "disabled perfctr wrmsr: "
+ "0x%x data 0x%llx\n", msr, data);
+ break;
case MSR_K7_CLK_CTL:
/*
* Ignore all writes to this no longer documented MSR.
case MSR_FAM10H_MMIO_CONF_BASE:
data = 0;
break;
+ case MSR_P6_PERFCTR0:
+ case MSR_P6_PERFCTR1:
+ case MSR_P6_EVNTSEL0:
+ case MSR_P6_EVNTSEL1:
+ if (kvm_pmu_msr(vcpu, msr))
+ return kvm_pmu_get_msr(vcpu, msr, pdata);
+ data = 0;
+ break;
case MSR_IA32_UCODE_REV:
data = 0x100000000ULL;
break;
return kvm_x86_ops->check_intercept(emul_to_vcpu(ctxt), info, stage);
}
+static bool emulator_get_cpuid(struct x86_emulate_ctxt *ctxt,
+ u32 *eax, u32 *ebx, u32 *ecx, u32 *edx)
+{
+ struct kvm_cpuid_entry2 *cpuid = NULL;
+
+ if (eax && ecx)
+ cpuid = kvm_find_cpuid_entry(emul_to_vcpu(ctxt),
+ *eax, *ecx);
+
+ if (cpuid) {
+ *eax = cpuid->eax;
+ *ecx = cpuid->ecx;
+ if (ebx)
+ *ebx = cpuid->ebx;
+ if (edx)
+ *edx = cpuid->edx;
+ return true;
+ }
+
+ return false;
+}
+
static struct x86_emulate_ops emulate_ops = {
.read_std = kvm_read_guest_virt_system,
.write_std = kvm_write_guest_virt_system,
.get_fpu = emulator_get_fpu,
.put_fpu = emulator_put_fpu,
.intercept = emulator_intercept,
+ .get_cpuid = emulator_get_cpuid,
};
static void cache_all_regs(struct kvm_vcpu *vcpu)
int __init pci_xen_hvm_init(void)
{
- if (!xen_feature(XENFEAT_hvm_pirqs))
+ if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs))
return 0;
#ifdef CONFIG_ACPI
/* Prevent unwanted bits from being set in PTEs. */
__supported_pte_mask &= ~_PAGE_GLOBAL;
+#if 0
if (!xen_initial_domain())
+#endif
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
__supported_pte_mask |= _PAGE_IOMAP;
pgd = (pgd_t *)xen_start_info->pt_base;
- if (!xen_initial_domain())
- __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
- __supported_pte_mask |= _PAGE_IOMAP;
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
static pteval_t xen_pte_val(pte_t pte)
{
pteval_t pteval = pte.pte;
-
+#if 0
/* If this is a WC pte, convert back from Xen WC to Linux WC */
if ((pteval & (_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)) == _PAGE_PAT) {
WARN_ON(!pat_enabled);
pteval = (pteval & ~_PAGE_PAT) | _PAGE_PWT;
}
-
+#endif
if (xen_initial_domain() && (pteval & _PAGE_IOMAP))
return pteval;
static pte_t xen_make_pte(pteval_t pte)
{
phys_addr_t addr = (pte & PTE_PFN_MASK);
-
+#if 0
/* If Linux is trying to set a WC pte, then map to the Xen WC.
* If _PAGE_PAT is set, then it probably means it is really
* _PAGE_PSE, so avoid fiddling with the PAT mapping and hope
if ((pte & (_PAGE_PCD | _PAGE_PWT)) == _PAGE_PWT)
pte = (pte & ~(_PAGE_PCD | _PAGE_PWT)) | _PAGE_PAT;
}
-
+#endif
/*
* Unprivileged domains are allowed to do IOMAPpings for
* PCI passthrough, but not map ISA space. The ISA
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
cpu_bringup();
+ /*
+ * Balance out the preempt calls - as we are running in cpu_idle
+ * loop which has been called at bootup from cpu_bringup_and_idle.
+ * The cpucpu_bringup_and_idle called cpu_bringup which made a
+ * preempt_disable() So this preempt_enable will balance it out.
+ */
+ preempt_enable();
}
#else /* !CONFIG_HOTPLUG_CPU */
/* Don't build bcopy at all ... */
#define __HAVE_ARCH_BCOPY
-#define __HAVE_ARCH_MEMSCAN
-#define memscan memchr
-
#endif /* _XTENSA_STRING_H */
ioc = get_task_io_context(task, GFP_ATOMIC, NUMA_NO_NODE);
if (ioc) {
ioc_cgroup_changed(ioc);
- put_io_context(ioc, NULL);
+ put_io_context(ioc);
}
}
}
if (rq->cmd_flags & REQ_ELVPRIV) {
elv_put_request(q, rq);
if (rq->elv.icq)
- put_io_context(rq->elv.icq->ioc, q);
+ put_io_context(rq->elv.icq->ioc);
}
mempool_free(rq, q->rq.rq_pool);
spin_unlock_irq(q->queue_lock);
/* create icq if missing */
- if (unlikely(et->icq_cache && !icq))
+ if ((rw_flags & REQ_ELVPRIV) && unlikely(et->icq_cache && !icq)) {
icq = ioc_create_icq(q, gfp_mask);
+ if (!icq)
+ goto fail_icq;
+ }
- /* rqs are guaranteed to have icq on elv_set_request() if requested */
- if (likely(!et->icq_cache || icq))
- rq = blk_alloc_request(q, icq, rw_flags, gfp_mask);
+ rq = blk_alloc_request(q, icq, rw_flags, gfp_mask);
+fail_icq:
if (unlikely(!rq)) {
/*
* Allocation failed presumably due to memory. Undo anything
req->ioprio = ioprio_best(req->ioprio, bio_prio(bio));
drive_stat_acct(req, 0);
- elv_bio_merged(q, req, bio);
return true;
}
req->ioprio = ioprio_best(req->ioprio, bio_prio(bio));
drive_stat_acct(req, 0);
- elv_bio_merged(q, req, bio);
return true;
}
* on %current's plugged list. Returns %true if merge was successful,
* otherwise %false.
*
- * This function is called without @q->queue_lock; however, elevator is
- * accessed iff there already are requests on the plugged list which in
- * turn guarantees validity of the elevator.
- *
- * Note that, on successful merge, elevator operation
- * elevator_bio_merged_fn() will be called without queue lock. Elevator
- * must be ready for this.
+ * Plugging coalesces IOs from the same issuer for the same purpose without
+ * going through @q->queue_lock. As such it's more of an issuing mechanism
+ * than scheduling, and the request, while may have elvpriv data, is not
+ * added on the elevator at this point. In addition, we don't have
+ * reliable access to the elevator outside queue lock. Only check basic
+ * merging parameters without querying the elevator.
*/
static bool attempt_plug_merge(struct request_queue *q, struct bio *bio,
unsigned int *request_count)
(*request_count)++;
- if (rq->q != q)
+ if (rq->q != q || !blk_rq_merge_ok(rq, bio))
continue;
- el_ret = elv_try_merge(rq, bio);
+ el_ret = blk_try_merge(rq, bio);
if (el_ret == ELEVATOR_BACK_MERGE) {
ret = bio_attempt_back_merge(q, rq, bio);
if (ret)
el_ret = elv_merge(q, &req, bio);
if (el_ret == ELEVATOR_BACK_MERGE) {
if (bio_attempt_back_merge(q, req, bio)) {
+ elv_bio_merged(q, req, bio);
if (!attempt_back_merge(q, req))
elv_merged_request(q, req, el_ret);
goto out_unlock;
}
} else if (el_ret == ELEVATOR_FRONT_MERGE) {
if (bio_attempt_front_merge(q, req, bio)) {
+ elv_bio_merged(q, req, bio);
if (!attempt_front_merge(q, req))
elv_merged_request(q, req, el_ret);
goto out_unlock;
}
EXPORT_SYMBOL(get_io_context);
-/*
- * Releasing ioc may nest into another put_io_context() leading to nested
- * fast path release. As the ioc's can't be the same, this is okay but
- * makes lockdep whine. Keep track of nesting and use it as subclass.
- */
-#ifdef CONFIG_LOCKDEP
-#define ioc_release_depth(q) ((q) ? (q)->ioc_release_depth : 0)
-#define ioc_release_depth_inc(q) (q)->ioc_release_depth++
-#define ioc_release_depth_dec(q) (q)->ioc_release_depth--
-#else
-#define ioc_release_depth(q) 0
-#define ioc_release_depth_inc(q) do { } while (0)
-#define ioc_release_depth_dec(q) do { } while (0)
-#endif
-
static void icq_free_icq_rcu(struct rcu_head *head)
{
struct io_cq *icq = container_of(head, struct io_cq, __rcu_head);
if (rcu_dereference_raw(ioc->icq_hint) == icq)
rcu_assign_pointer(ioc->icq_hint, NULL);
- if (et->ops.elevator_exit_icq_fn) {
- ioc_release_depth_inc(q);
+ if (et->ops.elevator_exit_icq_fn)
et->ops.elevator_exit_icq_fn(icq);
- ioc_release_depth_dec(q);
- }
/*
* @icq->q might have gone away by the time RCU callback runs
struct io_context *ioc = container_of(work, struct io_context,
release_work);
struct request_queue *last_q = NULL;
+ unsigned long flags;
- spin_lock_irq(&ioc->lock);
+ /*
+ * Exiting icq may call into put_io_context() through elevator
+ * which will trigger lockdep warning. The ioc's are guaranteed to
+ * be different, use a different locking subclass here. Use
+ * irqsave variant as there's no spin_lock_irq_nested().
+ */
+ spin_lock_irqsave_nested(&ioc->lock, flags, 1);
while (!hlist_empty(&ioc->icq_list)) {
struct io_cq *icq = hlist_entry(ioc->icq_list.first,
*/
if (last_q) {
spin_unlock(last_q->queue_lock);
- spin_unlock_irq(&ioc->lock);
+ spin_unlock_irqrestore(&ioc->lock, flags);
blk_put_queue(last_q);
} else {
- spin_unlock_irq(&ioc->lock);
+ spin_unlock_irqrestore(&ioc->lock, flags);
}
last_q = this_q;
- spin_lock_irq(this_q->queue_lock);
- spin_lock(&ioc->lock);
+ spin_lock_irqsave(this_q->queue_lock, flags);
+ spin_lock_nested(&ioc->lock, 1);
continue;
}
ioc_exit_icq(icq);
if (last_q) {
spin_unlock(last_q->queue_lock);
- spin_unlock_irq(&ioc->lock);
+ spin_unlock_irqrestore(&ioc->lock, flags);
blk_put_queue(last_q);
} else {
- spin_unlock_irq(&ioc->lock);
+ spin_unlock_irqrestore(&ioc->lock, flags);
}
kmem_cache_free(iocontext_cachep, ioc);
/**
* put_io_context - put a reference of io_context
* @ioc: io_context to put
- * @locked_q: request_queue the caller is holding queue_lock of (hint)
*
* Decrement reference count of @ioc and release it if the count reaches
- * zero. If the caller is holding queue_lock of a queue, it can indicate
- * that with @locked_q. This is an optimization hint and the caller is
- * allowed to pass in %NULL even when it's holding a queue_lock.
+ * zero.
*/
-void put_io_context(struct io_context *ioc, struct request_queue *locked_q)
+void put_io_context(struct io_context *ioc)
{
- struct request_queue *last_q = locked_q;
unsigned long flags;
if (ioc == NULL)
return;
BUG_ON(atomic_long_read(&ioc->refcount) <= 0);
- if (locked_q)
- lockdep_assert_held(locked_q->queue_lock);
-
- if (!atomic_long_dec_and_test(&ioc->refcount))
- return;
/*
- * Destroy @ioc. This is a bit messy because icq's are chained
- * from both ioc and queue, and ioc->lock nests inside queue_lock.
- * The inner ioc->lock should be held to walk our icq_list and then
- * for each icq the outer matching queue_lock should be grabbed.
- * ie. We need to do reverse-order double lock dancing.
- *
- * Another twist is that we are often called with one of the
- * matching queue_locks held as indicated by @locked_q, which
- * prevents performing double-lock dance for other queues.
- *
- * So, we do it in two stages. The fast path uses the queue_lock
- * the caller is holding and, if other queues need to be accessed,
- * uses trylock to avoid introducing locking dependency. This can
- * handle most cases, especially if @ioc was performing IO on only
- * single device.
- *
- * If trylock doesn't cut it, we defer to @ioc->release_work which
- * can do all the double-locking dancing.
+ * Releasing ioc requires reverse order double locking and we may
+ * already be holding a queue_lock. Do it asynchronously from wq.
*/
- spin_lock_irqsave_nested(&ioc->lock, flags,
- ioc_release_depth(locked_q));
-
- while (!hlist_empty(&ioc->icq_list)) {
- struct io_cq *icq = hlist_entry(ioc->icq_list.first,
- struct io_cq, ioc_node);
- struct request_queue *this_q = icq->q;
-
- if (this_q != last_q) {
- if (last_q && last_q != locked_q)
- spin_unlock(last_q->queue_lock);
- last_q = NULL;
-
- if (!spin_trylock(this_q->queue_lock))
- break;
- last_q = this_q;
- continue;
- }
- ioc_exit_icq(icq);
+ if (atomic_long_dec_and_test(&ioc->refcount)) {
+ spin_lock_irqsave(&ioc->lock, flags);
+ if (!hlist_empty(&ioc->icq_list))
+ schedule_work(&ioc->release_work);
+ spin_unlock_irqrestore(&ioc->lock, flags);
}
-
- if (last_q && last_q != locked_q)
- spin_unlock(last_q->queue_lock);
-
- spin_unlock_irqrestore(&ioc->lock, flags);
-
- /* if no icq is left, we're done; otherwise, kick release_work */
- if (hlist_empty(&ioc->icq_list))
- kmem_cache_free(iocontext_cachep, ioc);
- else
- schedule_work(&ioc->release_work);
}
EXPORT_SYMBOL(put_io_context);
task_unlock(task);
atomic_dec(&ioc->nr_tasks);
- put_io_context(ioc, NULL);
+ put_io_context(ioc);
}
/**
{
return attempt_merge(q, rq, next);
}
+
+bool blk_rq_merge_ok(struct request *rq, struct bio *bio)
+{
+ if (!rq_mergeable(rq))
+ return false;
+
+ /* don't merge file system requests and discard requests */
+ if ((bio->bi_rw & REQ_DISCARD) != (rq->bio->bi_rw & REQ_DISCARD))
+ return false;
+
+ /* don't merge discard requests and secure discard requests */
+ if ((bio->bi_rw & REQ_SECURE) != (rq->bio->bi_rw & REQ_SECURE))
+ return false;
+
+ /* different data direction or already started, don't merge */
+ if (bio_data_dir(bio) != rq_data_dir(rq))
+ return false;
+
+ /* must be same device and not a special request */
+ if (rq->rq_disk != bio->bi_bdev->bd_disk || rq->special)
+ return false;
+
+ /* only merge integrity protected bio into ditto rq */
+ if (bio_integrity(bio) != blk_integrity_rq(rq))
+ return false;
+
+ return true;
+}
+
+int blk_try_merge(struct request *rq, struct bio *bio)
+{
+ if (blk_rq_pos(rq) + blk_rq_sectors(rq) == bio->bi_sector)
+ return ELEVATOR_BACK_MERGE;
+ else if (blk_rq_pos(rq) - bio_sectors(bio) == bio->bi_sector)
+ return ELEVATOR_FRONT_MERGE;
+ return ELEVATOR_NO_MERGE;
+}
struct request *next);
void blk_recalc_rq_segments(struct request *rq);
void blk_rq_set_mixed_merge(struct request *rq);
+bool blk_rq_merge_ok(struct request *rq, struct bio *bio);
+int blk_try_merge(struct request *rq, struct bio *bio);
void blk_queue_congestion_threshold(struct request_queue *q);
mutex_lock(&bsg_mutex);
idr_remove(&bsg_minor_idr, bcd->minor);
- sysfs_remove_link(&q->kobj, "bsg");
+ if (q->kobj.sd)
+ sysfs_remove_link(&q->kobj, "bsg");
device_unregister(bcd->class_dev);
bcd->class_dev = NULL;
kref_put(&bcd->ref, bsg_kref_release_function);
/*
* Lookup the cfqq that this bio will be queued with and allow
- * merge only if rq is queued there. This function can be called
- * from plug merge without queue_lock. In such cases, ioc of @rq
- * and %current are guaranteed to be equal. Avoid lookup which
- * requires queue_lock by using @rq's cic.
+ * merge only if rq is queued there.
*/
- if (current->io_context == RQ_CIC(rq)->icq.ioc) {
- cic = RQ_CIC(rq);
- } else {
- cic = cfq_cic_lookup(cfqd, current->io_context);
- if (!cic)
- return false;
- }
+ cic = cfq_cic_lookup(cfqd, current->io_context);
+ if (!cic)
+ return false;
cfqq = cic_to_cfqq(cic, cfq_bio_sync(bio));
return cfqq == RQ_CFQQ(rq);
cfqd->active_queue = NULL;
if (cfqd->active_cic) {
- put_io_context(cfqd->active_cic->icq.ioc, cfqd->queue);
+ put_io_context(cfqd->active_cic->icq.ioc);
cfqd->active_cic = NULL;
}
}
*/
static void cfq_preempt_queue(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
+ enum wl_type_t old_type = cfqq_type(cfqd->active_queue);
+
cfq_log_cfqq(cfqd, cfqq, "preempt");
+ cfq_slice_expired(cfqd, 1);
/*
* workload type is changed, don't save slice, otherwise preempt
* doesn't happen
*/
- if (cfqq_type(cfqd->active_queue) != cfqq_type(cfqq))
+ if (old_type != cfqq_type(cfqq))
cfqq->cfqg->saved_workload_slice = 0;
- cfq_slice_expired(cfqd, 1);
-
/*
* Put the new queue at the front of the of the current list,
* so we know that it will be selected next.
/*
* can we safely merge with this request?
*/
-int elv_rq_merge_ok(struct request *rq, struct bio *bio)
+bool elv_rq_merge_ok(struct request *rq, struct bio *bio)
{
- if (!rq_mergeable(rq))
- return 0;
-
- /*
- * Don't merge file system requests and discard requests
- */
- if ((bio->bi_rw & REQ_DISCARD) != (rq->bio->bi_rw & REQ_DISCARD))
- return 0;
-
- /*
- * Don't merge discard requests and secure discard requests
- */
- if ((bio->bi_rw & REQ_SECURE) != (rq->bio->bi_rw & REQ_SECURE))
- return 0;
-
- /*
- * different data direction or already started, don't merge
- */
- if (bio_data_dir(bio) != rq_data_dir(rq))
- return 0;
-
- /*
- * must be same device and not a special request
- */
- if (rq->rq_disk != bio->bi_bdev->bd_disk || rq->special)
- return 0;
-
- /*
- * only merge integrity protected bio into ditto rq
- */
- if (bio_integrity(bio) != blk_integrity_rq(rq))
+ if (!blk_rq_merge_ok(rq, bio))
return 0;
if (!elv_iosched_allow_merge(rq, bio))
}
EXPORT_SYMBOL(elv_rq_merge_ok);
-int elv_try_merge(struct request *__rq, struct bio *bio)
-{
- int ret = ELEVATOR_NO_MERGE;
-
- /*
- * we can merge and sequence is ok, check if it's possible
- */
- if (elv_rq_merge_ok(__rq, bio)) {
- if (blk_rq_pos(__rq) + blk_rq_sectors(__rq) == bio->bi_sector)
- ret = ELEVATOR_BACK_MERGE;
- else if (blk_rq_pos(__rq) - bio_sectors(bio) == bio->bi_sector)
- ret = ELEVATOR_FRONT_MERGE;
- }
-
- return ret;
-}
-
static struct elevator_type *elevator_find(const char *name)
{
struct elevator_type *e;
/*
* First try one-hit cache.
*/
- if (q->last_merge) {
- ret = elv_try_merge(q->last_merge, bio);
+ if (q->last_merge && elv_rq_merge_ok(q->last_merge, bio)) {
+ ret = blk_try_merge(q->last_merge, bio);
if (ret != ELEVATOR_NO_MERGE) {
*req = q->last_merge;
return ret;
* ldm - Support for Windows Logical Disk Manager (Dynamic Disks)
*
* Copyright (C) 2001,2002 Richard Russon <ldm@flatcap.org>
- * Copyright (c) 2001-2007 Anton Altaparmakov
+ * Copyright (c) 2001-2012 Anton Altaparmakov
* Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com>
*
* Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads
ldm_error("REC value (%d) exceeds NUM value (%d)", rec, f->num);
return false;
}
-
if (f->map & (1 << rec)) {
ldm_error ("Duplicate VBLK, part %d.", rec);
f->map &= 0x7F; /* Mark the group as broken */
return false;
}
-
f->map |= (1 << rec);
-
+ if (!rec)
+ memcpy(f->data, data, VBLK_SIZE_HEAD);
data += VBLK_SIZE_HEAD;
size -= VBLK_SIZE_HEAD;
-
- memcpy (f->data+rec*(size-VBLK_SIZE_HEAD)+VBLK_SIZE_HEAD, data, size);
-
+ memcpy(f->data + VBLK_SIZE_HEAD + rec * size, data, size);
return true;
}
return (x & y) | (z & (x | y));
}
-static inline u64 RORu64(u64 x, u64 y)
-{
- return (x >> y) | (x << (64 - y));
-}
-
static const u64 sha512_K[80] = {
0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL, 0xb5c0fbcfec4d3b2fULL,
0xe9b5dba58189dbbcULL, 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL,
0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL,
};
-#define e0(x) (RORu64(x,28) ^ RORu64(x,34) ^ RORu64(x,39))
-#define e1(x) (RORu64(x,14) ^ RORu64(x,18) ^ RORu64(x,41))
-#define s0(x) (RORu64(x, 1) ^ RORu64(x, 8) ^ (x >> 7))
-#define s1(x) (RORu64(x,19) ^ RORu64(x,61) ^ (x >> 6))
+#define e0(x) (ror64(x,28) ^ ror64(x,34) ^ ror64(x,39))
+#define e1(x) (ror64(x,14) ^ ror64(x,18) ^ ror64(x,41))
+#define s0(x) (ror64(x, 1) ^ ror64(x, 8) ^ (x >> 7))
+#define s1(x) (ror64(x,19) ^ ror64(x,61) ^ (x >> 6))
static inline void LOAD_OP(int I, u64 *W, const u8 *input)
{
static inline void BLEND_OP(int I, u64 *W)
{
- W[I % 16] += s1(W[(I-2) % 16]) + W[(I-7) % 16] + s0(W[(I-15) % 16]);
+ W[I & 15] += s1(W[(I-2) & 15]) + W[(I-7) & 15] + s0(W[(I-15) & 15]);
}
static void
int i;
u64 W[16];
- /* load the input */
- for (i = 0; i < 16; i++)
- LOAD_OP(i, W, input);
-
/* load the state into our registers */
a=state[0]; b=state[1]; c=state[2]; d=state[3];
e=state[4]; f=state[5]; g=state[6]; h=state[7];
-#define SHA512_0_15(i, a, b, c, d, e, f, g, h) \
- t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[i]; \
- t2 = e0(a) + Maj(a, b, c); \
- d += t1; \
- h = t1 + t2
-
-#define SHA512_16_79(i, a, b, c, d, e, f, g, h) \
- BLEND_OP(i, W); \
- t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[(i)%16]; \
- t2 = e0(a) + Maj(a, b, c); \
- d += t1; \
- h = t1 + t2
-
- for (i = 0; i < 16; i += 8) {
- SHA512_0_15(i, a, b, c, d, e, f, g, h);
- SHA512_0_15(i + 1, h, a, b, c, d, e, f, g);
- SHA512_0_15(i + 2, g, h, a, b, c, d, e, f);
- SHA512_0_15(i + 3, f, g, h, a, b, c, d, e);
- SHA512_0_15(i + 4, e, f, g, h, a, b, c, d);
- SHA512_0_15(i + 5, d, e, f, g, h, a, b, c);
- SHA512_0_15(i + 6, c, d, e, f, g, h, a, b);
- SHA512_0_15(i + 7, b, c, d, e, f, g, h, a);
- }
- for (i = 16; i < 80; i += 8) {
- SHA512_16_79(i, a, b, c, d, e, f, g, h);
- SHA512_16_79(i + 1, h, a, b, c, d, e, f, g);
- SHA512_16_79(i + 2, g, h, a, b, c, d, e, f);
- SHA512_16_79(i + 3, f, g, h, a, b, c, d, e);
- SHA512_16_79(i + 4, e, f, g, h, a, b, c, d);
- SHA512_16_79(i + 5, d, e, f, g, h, a, b, c);
- SHA512_16_79(i + 6, c, d, e, f, g, h, a, b);
- SHA512_16_79(i + 7, b, c, d, e, f, g, h, a);
+ /* now iterate */
+ for (i=0; i<80; i+=8) {
+ if (!(i & 8)) {
+ int j;
+
+ if (i < 16) {
+ /* load the input */
+ for (j = 0; j < 16; j++)
+ LOAD_OP(i + j, W, input);
+ } else {
+ for (j = 0; j < 16; j++) {
+ BLEND_OP(i + j, W);
+ }
+ }
+ }
+
+ t1 = h + e1(e) + Ch(e,f,g) + sha512_K[i ] + W[(i & 15)];
+ t2 = e0(a) + Maj(a,b,c); d+=t1; h=t1+t2;
+ t1 = g + e1(d) + Ch(d,e,f) + sha512_K[i+1] + W[(i & 15) + 1];
+ t2 = e0(h) + Maj(h,a,b); c+=t1; g=t1+t2;
+ t1 = f + e1(c) + Ch(c,d,e) + sha512_K[i+2] + W[(i & 15) + 2];
+ t2 = e0(g) + Maj(g,h,a); b+=t1; f=t1+t2;
+ t1 = e + e1(b) + Ch(b,c,d) + sha512_K[i+3] + W[(i & 15) + 3];
+ t2 = e0(f) + Maj(f,g,h); a+=t1; e=t1+t2;
+ t1 = d + e1(a) + Ch(a,b,c) + sha512_K[i+4] + W[(i & 15) + 4];
+ t2 = e0(e) + Maj(e,f,g); h+=t1; d=t1+t2;
+ t1 = c + e1(h) + Ch(h,a,b) + sha512_K[i+5] + W[(i & 15) + 5];
+ t2 = e0(d) + Maj(d,e,f); g+=t1; c=t1+t2;
+ t1 = b + e1(g) + Ch(g,h,a) + sha512_K[i+6] + W[(i & 15) + 6];
+ t2 = e0(c) + Maj(c,d,e); f+=t1; b=t1+t2;
+ t1 = a + e1(f) + Ch(f,g,h) + sha512_K[i+7] + W[(i & 15) + 7];
+ t2 = e0(b) + Maj(b,c,d); e+=t1; a=t1+t2;
}
state[0] += a; state[1] += b; state[2] += c; state[3] += d;
goto err_free_cpumask;
}
- /*
- * Do not start hotplugged CPUs now, but when they
- * are onlined the first time
- */
- if (pr->flags.need_hotplug_init)
- return 0;
-
/*
* Do not start hotplugged CPUs now, but when they
* are onlined the first time
{
int ret = 0;
int use_iordy;
+ struct sam9_smc_config smc;
unsigned int t6z; /* data tristate time in ns */
unsigned int cycle; /* SMC Cycle width in MCK ticks */
unsigned int setup; /* SMC Setup width in MCK ticks */
unsigned int pulse; /* CFIOR and CFIOW pulse width in MCK ticks */
- unsigned int cs_setup = 0;/* CS4 or CS5 setup width in MCK ticks */
unsigned int cs_pulse; /* CS4 or CS5 pulse width in MCK ticks*/
unsigned int tdf_cycles; /* SMC TDF MCK ticks */
unsigned long mck_hz; /* MCK frequency in Hz */
}
dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
- info->mode |= AT91_SMC_TDF_(tdf_cycles);
-
- /* write SMC Setup Register */
- at91_sys_write(AT91_SMC_SETUP(info->cs),
- AT91_SMC_NWESETUP_(setup) |
- AT91_SMC_NRDSETUP_(setup) |
- AT91_SMC_NCS_WRSETUP_(cs_setup) |
- AT91_SMC_NCS_RDSETUP_(cs_setup));
- /* write SMC Pulse Register */
- at91_sys_write(AT91_SMC_PULSE(info->cs),
- AT91_SMC_NWEPULSE_(pulse) |
- AT91_SMC_NRDPULSE_(pulse) |
- AT91_SMC_NCS_WRPULSE_(cs_pulse) |
- AT91_SMC_NCS_RDPULSE_(cs_pulse));
- /* write SMC Cycle Register */
- at91_sys_write(AT91_SMC_CYCLE(info->cs),
- AT91_SMC_NWECYCLE_(cycle) |
- AT91_SMC_NRDCYCLE_(cycle));
- /* write SMC Mode Register*/
- at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+
+ /* SMC Setup Register */
+ smc.nwe_setup = smc.nrd_setup = setup;
+ smc.ncs_write_setup = smc.ncs_read_setup = 0;
+ /* SMC Pulse Register */
+ smc.nwe_pulse = smc.nrd_pulse = pulse;
+ smc.ncs_write_pulse = smc.ncs_read_pulse = cs_pulse;
+ /* SMC Cycle Register */
+ smc.write_cycle = smc.read_cycle = cycle;
+ /* SMC Mode Register*/
+ smc.tdf_cycles = tdf_cycles;
+ smc.mode = info->mode;
+
+ sam9_smc_configure(0, info->cs, &smc);
}
static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
struct at91_ide_info *info = dev->link->ap->host->private_data;
unsigned int consumed;
unsigned long flags;
- unsigned int mode;
+ struct sam9_smc_config smc;
local_irq_save(flags);
- mode = at91_sys_read(AT91_SMC_MODE(info->cs));
+ sam9_smc_read_mode(0, info->cs, &smc);
/* set 16bit mode before writing data */
- at91_sys_write(AT91_SMC_MODE(info->cs),
- (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16);
+ smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16;
+ sam9_smc_write_mode(0, info->cs, &smc);
consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
/* restore 8bit mode after data is written */
- at91_sys_write(AT91_SMC_MODE(info->cs),
- (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8);
+ smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8;
+ sam9_smc_write_mode(0, info->cs, &smc);
local_irq_restore(flags);
return consumed;
out_unmap_both:
pci_set_drvdata(dev, NULL);
- pci_iounmap(dev, card->config_regs);
- out_unmap_config:
pci_iounmap(dev, card->buffers);
+ out_unmap_config:
+ pci_iounmap(dev, card->config_regs);
out_release_regions:
pci_release_regions(dev);
out:
}
static DEVICE_ATTR(offline, 0444, print_cpus_offline, NULL);
+static void cpu_device_release(struct device *dev)
+{
+ /*
+ * This is an empty function to prevent the driver core from spitting a
+ * warning at us. Yes, I know this is directly opposite of what the
+ * documentation for the driver core and kobjects say, and the author
+ * of this code has already been publically ridiculed for doing
+ * something as foolish as this. However, at this point in time, it is
+ * the only way to handle the issue of statically allocated cpu
+ * devices. The different architectures will have their cpu device
+ * code reworked to properly handle this in the near future, so this
+ * function will then be changed to correctly free up the memory held
+ * by the cpu device.
+ *
+ * Never copy this way of doing things, or you too will be made fun of
+ * on the linux-kerenl list, you have been warned.
+ */
+}
+
/*
* register_cpu - Setup a sysfs device for a CPU.
* @cpu - cpu->hotpluggable field set to 1 will generate a control file in
int error;
cpu->node_id = cpu_to_node(num);
+ memset(&cpu->dev, 0x00, sizeof(struct device));
cpu->dev.id = num;
cpu->dev.bus = &cpu_subsys;
+ cpu->dev.release = cpu_device_release;
error = device_register(&cpu->dev);
if (!error && cpu->hotpluggable)
register_cpu_control(cpu);
}
static int add_memory_section(int nid, struct mem_section *section,
+ struct memory_block **mem_p,
unsigned long state, enum mem_add_context context)
{
- struct memory_block *mem;
+ struct memory_block *mem = NULL;
+ int scn_nr = __section_nr(section);
int ret = 0;
mutex_lock(&mem_sysfs_mutex);
- mem = find_memory_block(section);
+ if (context == BOOT) {
+ /* same memory block ? */
+ if (mem_p && *mem_p)
+ if (scn_nr >= (*mem_p)->start_section_nr &&
+ scn_nr <= (*mem_p)->end_section_nr) {
+ mem = *mem_p;
+ kobject_get(&mem->dev.kobj);
+ }
+ } else
+ mem = find_memory_block(section);
+
if (mem) {
mem->section_count++;
kobject_put(&mem->dev.kobj);
- } else
+ } else {
ret = init_memory_block(&mem, section, state);
+ /* store memory_block pointer for next loop */
+ if (!ret && context == BOOT)
+ if (mem_p)
+ *mem_p = mem;
+ }
if (!ret) {
if (context == HOTPLUG &&
*/
int register_new_memory(int nid, struct mem_section *section)
{
- return add_memory_section(nid, section, MEM_OFFLINE, HOTPLUG);
+ return add_memory_section(nid, section, NULL, MEM_OFFLINE, HOTPLUG);
}
int unregister_memory_section(struct mem_section *section)
int ret;
int err;
unsigned long block_sz;
+ struct memory_block *mem = NULL;
ret = subsys_system_register(&memory_subsys, NULL);
if (ret)
for (i = 0; i < NR_MEM_SECTIONS; i++) {
if (!present_section_nr(i))
continue;
- err = add_memory_section(0, __nr_to_section(i), MEM_ONLINE,
+ /* don't need to reuse memory_block if only one per block */
+ err = add_memory_section(0, __nr_to_section(i),
+ (sections_per_block == 1) ? NULL : &mem,
+ MEM_ONLINE,
BOOT);
if (!ret)
ret = err;
if (!present_section_nr(section_nr))
continue;
mem_sect = __nr_to_section(section_nr);
+
+ /* same memblock ? */
+ if (mem_blk)
+ if ((section_nr >= mem_blk->start_section_nr) &&
+ (section_nr <= mem_blk->end_section_nr))
+ continue;
+
mem_blk = find_memory_block_hinted(mem_sect, mem_blk);
+
ret = register_mem_sect_under_node(mem_blk, nid);
if (!err)
err = ret;
for (count = 0, i = 0; i < map->num_reg_defaults_raw; i++) {
val = regcache_get_val(map->reg_defaults_raw,
i, map->cache_word_size);
- if (!val)
+ if (regmap_volatile(map, i))
continue;
count++;
}
for (i = 0, j = 0; i < map->num_reg_defaults_raw; i++) {
val = regcache_get_val(map->reg_defaults_raw,
i, map->cache_word_size);
- if (!val)
+ if (regmap_volatile(map, i))
continue;
map->reg_defaults[j].reg = i;
map->reg_defaults[j].def = val;
err = bcma_sprom_get(bus);
if (err == -ENOENT) {
pr_err("No SPROM available\n");
- } else if (err) {
+ } else if (err)
pr_err("Failed to get SPROM: %d\n", err);
- return -ENOENT;
- }
/* Register found cores */
bcma_register_cores(bus);
core->bus = bus;
err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core);
- if (err == -ENODEV) {
- core_num++;
- continue;
- } else if (err == -ENXIO)
- continue;
- else if (err == -ESPIPE)
- break;
- else if (err < 0)
+ if (err < 0) {
+ kfree(core);
+ if (err == -ENODEV) {
+ core_num++;
+ continue;
+ } else if (err == -ENXIO) {
+ continue;
+ } else if (err == -ESPIPE) {
+ break;
+ }
return err;
+ }
core->core_index = core_num++;
bus->nr_cores++;
out_put_disk:
while (dr--) {
del_timer_sync(&motor_off_timer[dr]);
- if (disks[dr]->queue)
+ if (disks[dr]->queue) {
blk_cleanup_queue(disks[dr]->queue);
+ /*
+ * put_disk() is not paired with add_disk() and
+ * will put queue reference one extra time. fix it.
+ */
+ disks[dr]->queue = NULL;
+ }
put_disk(disks[dr]);
}
return err;
platform_device_unregister(&floppy_device[drive]);
}
blk_cleanup_queue(disks[drive]->queue);
+
+ /*
+ * These disks have not called add_disk(). Don't put down
+ * queue reference in put_disk().
+ */
+ if (!(allowed_drive_mask & (1 << drive)) ||
+ fdc_state[FDC(drive)].version == FDC_NONE)
+ disks[drive]->queue = NULL;
+
put_disk(disks[drive]);
}
return __splice_from_pipe(pipe, sd, lo_splice_actor);
}
-static int
+static ssize_t
do_lo_receive(struct loop_device *lo,
struct bio_vec *bvec, int bsize, loff_t pos)
{
struct lo_read_data cookie;
struct splice_desc sd;
struct file *file;
- long retval;
+ ssize_t retval;
cookie.lo = lo;
cookie.page = bvec->bv_page;
file = lo->lo_backing_file;
retval = splice_direct_to_actor(file, &sd, lo_direct_splice_actor);
- if (retval < 0)
- return retval;
- if (retval != bvec->bv_len)
- return -EIO;
- return 0;
+ return retval;
}
static int
lo_receive(struct loop_device *lo, struct bio *bio, int bsize, loff_t pos)
{
struct bio_vec *bvec;
- int i, ret = 0;
+ ssize_t s;
+ int i;
bio_for_each_segment(bvec, bio, i) {
- ret = do_lo_receive(lo, bvec, bsize, pos);
- if (ret < 0)
+ s = do_lo_receive(lo, bvec, bsize, pos);
+ if (s < 0)
+ return s;
+
+ if (s != bvec->bv_len) {
+ zero_fill_bio(bio);
break;
+ }
pos += bvec->bv_len;
}
- return ret;
+ return 0;
}
static int do_bio_filebacked(struct loop_device *lo, struct bio *bio)
* when the read completes.
* @data Callback data passed to the callback function
* when the read completes.
- * @barrier If non-zero, this command must be completed before
- * issuing any other commands.
* @dir Direction (read or write)
*
* return value
*/
static void mtip_hw_submit_io(struct driver_data *dd, sector_t start,
int nsect, int nents, int tag, void *callback,
- void *data, int barrier, int dir)
+ void *data, int dir)
{
struct host_to_dev_fis *fis;
struct mtip_port *port = dd->port;
*((unsigned int *) &fis->lba_low) = (start & 0xFFFFFF);
*((unsigned int *) &fis->lba_low_ex) = ((start >> 24) & 0xFFFFFF);
fis->device = 1 << 6;
- if (barrier)
- fis->device |= FUA_BIT;
fis->features = nsect & 0xFF;
fis->features_ex = (nsect >> 8) & 0xFF;
fis->sect_count = ((tag << 3) | (tag >> 5));
tag,
bio_endio,
bio,
- bio->bi_rw & REQ_FUA,
bio_data_dir(bio));
} else
bio_io_error(bio);
blk_queue_max_segments(dd->queue, MTIP_MAX_SG);
blk_queue_physical_block_size(dd->queue, 4096);
blk_queue_io_min(dd->queue, 4096);
+ /*
+ * write back cache is not supported in the device. FUA depends on
+ * write back cache support, hence setting flush support to zero.
+ */
blk_queue_flush(dd->queue, 0);
/* Set the capacity of the device in 512 byte sectors. */
/* BAR number used to access the HBA registers. */
#define MTIP_ABAR 5
-/* Forced Unit Access Bit */
-#define FUA_BIT 0x80
-
#ifdef DEBUG
#define dbg_printk(format, arg...) \
printk(pr_fmt(format), ##arg);
atomic_t resumeflag; /* Atomic variable to track suspend/resume */
- atomic_t eh_active; /* Flag for error handling tracking */
-
struct task_struct *mtip_svc_handler; /* task_struct of svc thd */
};
#include <linux/types.h>
#include <linux/version.h>
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
#define NVME_Q_DEPTH 1024
#define SQ_SIZE(depth) (depth * sizeof(struct nvme_command))
#define CQ_SIZE(depth) (depth * sizeof(struct nvme_completion))
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0a5c, 0x21e3) },
+ { USB_DEVICE(0x0a5c, 0x21f3) },
{ USB_DEVICE(0x413c, 0x8197) },
{ } /* Terminating entry */
usb_fill_bulk_urb(urb, data->udev, pipe,
skb->data, skb->len, btusb_tx_complete, skb);
- if (skb->priority >= HCI_PRIO_MAX - 1)
- urb->transfer_flags = URB_ISO_ASAP;
-
hdev->stat.acl_tx++;
break;
/* used to tell the module to turn on full debugging messages */
static bool debug;
-/* used to keep tray locked at all times */
-static int keeplocked;
/* default compatibility mode */
static bool autoclose=1;
static bool autoeject;
cdinfo(CD_CLOSE, "Use count for \"/dev/%s\" now zero\n", cdi->name);
cdrom_dvd_rw_close_write(cdi);
- if ((cdo->capability & CDC_LOCK) && !keeplocked) {
+ if ((cdo->capability & CDC_LOCK) && !cdi->keeplocked) {
cdinfo(CD_CLOSE, "Unlocking door!\n");
cdo->lock_door(cdi, 0);
}
curslot = info->hdr.curslot;
kfree(info);
- if (cdi->use_count > 1 || keeplocked) {
+ if (cdi->use_count > 1 || cdi->keeplocked) {
if (slot == CDSL_CURRENT) {
return curslot;
} else {
if (!nr)
return -ENOMEM;
- if (!access_ok(VERIFY_WRITE, ubuf, nframes * CD_FRAMESIZE_RAW)) {
- ret = -EFAULT;
- goto out;
- }
-
cgc.data_direction = CGC_DATA_READ;
while (nframes > 0) {
if (nr > nframes)
ret = cdrom_read_block(cdi, &cgc, lba, nr, 1, CD_FRAMESIZE_RAW);
if (ret)
break;
- if (__copy_to_user(ubuf, cgc.buffer, CD_FRAMESIZE_RAW * nr)) {
+ if (copy_to_user(ubuf, cgc.buffer, CD_FRAMESIZE_RAW * nr)) {
ret = -EFAULT;
break;
}
nframes -= nr;
lba += nr;
}
-out:
kfree(cgc.buffer);
return ret;
}
if (!CDROM_CAN(CDC_OPEN_TRAY))
return -ENOSYS;
- if (cdi->use_count != 1 || keeplocked)
+ if (cdi->use_count != 1 || cdi->keeplocked)
return -EBUSY;
if (CDROM_CAN(CDC_LOCK)) {
int ret = cdi->ops->lock_door(cdi, 0);
if (!CDROM_CAN(CDC_OPEN_TRAY))
return -ENOSYS;
- if (keeplocked)
+ if (cdi->keeplocked)
return -EBUSY;
cdi->options &= ~(CDO_AUTO_CLOSE | CDO_AUTO_EJECT);
if (!CDROM_CAN(CDC_LOCK))
return -EDRIVE_CANT_DO_THIS;
- keeplocked = arg ? 1 : 0;
+ cdi->keeplocked = arg ? 1 : 0;
/*
* Don't unlock the door on multiple opens by default, but allow
config CPU_IDLE
bool "CPU idle PM support"
- default ACPI
+ default y if ACPI || PPC_PSERIES
help
CPU idle is a generic framework for supporting software-controlled
idle processor power management. It includes modular cross-platform
{
struct mv_req_hash_ctx *ctx = ahash_request_ctx(req);
+ ahash_request_set_crypt(req, NULL, req->result, 0);
mv_update_hash_req_ctx(ctx, 1, 0);
return mv_handle_req(&req->base);
}
tasklet_init(&atchan->tasklet, atc_tasklet,
(unsigned long)atchan);
- atc_enable_irq(atchan);
+ atc_enable_chan_irq(atdma, i);
}
/* set base routines */
struct at_dma_chan *atchan = to_at_dma_chan(chan);
/* Disable interrupts */
- atc_disable_irq(atchan);
+ atc_disable_chan_irq(atdma, chan->chan_id);
tasklet_disable(&atchan->tasklet);
tasklet_kill(&atchan->tasklet);
}
-static void atc_setup_irq(struct at_dma_chan *atchan, int on)
+static void atc_setup_irq(struct at_dma *atdma, int chan_id, int on)
{
- struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
- u32 ebci;
+ u32 ebci;
/* enable interrupts on buffer transfer completion & error */
- ebci = AT_DMA_BTC(atchan->chan_common.chan_id)
- | AT_DMA_ERR(atchan->chan_common.chan_id);
+ ebci = AT_DMA_BTC(chan_id)
+ | AT_DMA_ERR(chan_id);
if (on)
dma_writel(atdma, EBCIER, ebci);
else
dma_writel(atdma, EBCIDR, ebci);
}
-static inline void atc_enable_irq(struct at_dma_chan *atchan)
+static void atc_enable_chan_irq(struct at_dma *atdma, int chan_id)
{
- atc_setup_irq(atchan, 1);
+ atc_setup_irq(atdma, chan_id, 1);
}
-static inline void atc_disable_irq(struct at_dma_chan *atchan)
+static void atc_disable_chan_irq(struct at_dma *atdma, int chan_id)
{
- atc_setup_irq(atchan, 0);
+ atc_setup_irq(atdma, chan_id, 0);
}
}
if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(dtc, DMA_PQ);
- thread_count += cnt > 0 ?: 0;
+ thread_count += cnt > 0 ? cnt : 0;
}
pr_info("dmatest: Started %u threads using %s\n",
case DMA_SLAVE_CONFIG:
if (dmaengine_cfg->direction == DMA_DEV_TO_MEM) {
sdmac->per_address = dmaengine_cfg->src_addr;
- sdmac->watermark_level = dmaengine_cfg->src_maxburst;
+ sdmac->watermark_level = dmaengine_cfg->src_maxburst *
+ dmaengine_cfg->src_addr_width;
sdmac->word_size = dmaengine_cfg->src_addr_width;
} else {
sdmac->per_address = dmaengine_cfg->dst_addr;
- sdmac->watermark_level = dmaengine_cfg->dst_maxburst;
+ sdmac->watermark_level = dmaengine_cfg->dst_maxburst *
+ dmaengine_cfg->dst_addr_width;
sdmac->word_size = dmaengine_cfg->dst_addr_width;
}
sdmac->direction = dmaengine_cfg->direction;
INIT_LIST_HEAD(&shdev->common.channels);
- dma_cap_set(DMA_MEMCPY, shdev->common.cap_mask);
+ if (!pdata->slave_only)
+ dma_cap_set(DMA_MEMCPY, shdev->common.cap_mask);
if (pdata->slave && pdata->slave_num)
dma_cap_set(DMA_SLAVE, shdev->common.cap_mask);
#include <linux/io.h>
#include "edac_core.h"
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
#define I3200_REVISION "1.1"
#define EDAC_MOD_STR "i3200_edac"
static int nr_channels;
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-#endif
-
static int how_many_channels(struct pci_dev *pdev)
{
unsigned char capid0_8b; /* 8th byte of CAPID0 */
};
static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = {
- "gpi000", "gpio01", "gpio02", "gpio03",
+ "gpio00", "gpio01", "gpio02", "gpio03",
"gpio04", "gpio05"
};
chip->reg = chip->base;
chip->ch = i;
mutex_init(&chip->lock);
+ spin_lock_init(&chip->spinlock);
ioh_gpio_setup(chip, num_ports[i]);
ret = gpiochip_add(&chip->gpio);
if (ret) {
chip->reg = chip->base;
pci_set_drvdata(pdev, chip);
mutex_init(&chip->lock);
+ spin_lock_init(&chip->spinlock);
pch_gpio_setup(chip);
ret = gpiochip_add(&chip->gpio);
if (ret) {
};
#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF)
-static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np,
- const void *gpio_spec, u32 *flags)
+static int exynos4_gpio_xlate(struct gpio_chip *gc,
+ const struct of_phandle_args *gpiospec, u32 *flags)
{
- const __be32 *gpio = gpio_spec;
- const u32 n = be32_to_cpup(gpio);
- unsigned int pin = gc->base + be32_to_cpu(gpio[0]);
+ unsigned int pin;
if (WARN_ON(gc->of_gpio_n_cells < 4))
return -EINVAL;
- if (n > gc->ngpio)
+ if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
return -EINVAL;
- if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1]))))
+ if (gpiospec->args[0] > gc->ngpio)
+ return -EINVAL;
+
+ pin = gc->base + gpiospec->args[0];
+
+ if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
pr_warn("gpio_xlate: failed to set pin function\n");
- if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2])))
+ if (s3c_gpio_setpull(pin, gpiospec->args[2]))
pr_warn("gpio_xlate: failed to set pin pull up/down\n");
- if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3])))
+ if (s5p_gpio_set_drvstr(pin, gpiospec->args[3]))
pr_warn("gpio_xlate: failed to set pin drive strength\n");
- return n;
+ return gpiospec->args[0];
}
static const struct of_device_id exynos4_gpio_dt_match[] __initdata = {
if (err)
return err;
- if (__get_user(c32.auth, &client->auth)
+ if (__get_user(c32.idx, &client->idx)
+ || __get_user(c32.auth, &client->auth)
|| __get_user(c32.pid, &client->pid)
|| __get_user(c32.uid, &client->uid)
|| __get_user(c32.magic, &client->magic)
#include "drmP.h"
#include "drm_crtc_helper.h"
+#include <drm/exynos_drm.h>
#include "exynos_drm_drv.h"
#include "exynos_drm_encoder.h"
/* convert exynos_video_timings to drm_display_mode */
static inline void
convert_to_display_mode(struct drm_display_mode *mode,
- struct fb_videomode *timing)
+ struct exynos_drm_panel_info *panel)
{
+ struct fb_videomode *timing = &panel->timing;
DRM_DEBUG_KMS("%s\n", __FILE__);
mode->clock = timing->pixclock / 1000;
mode->vsync_start = mode->vdisplay + timing->upper_margin;
mode->vsync_end = mode->vsync_start + timing->vsync_len;
mode->vtotal = mode->vsync_end + timing->lower_margin;
+ mode->width_mm = panel->width_mm;
+ mode->height_mm = panel->height_mm;
if (timing->vmode & FB_VMODE_INTERLACED)
mode->flags |= DRM_MODE_FLAG_INTERLACE;
connector->display_info.raw_edid = edid;
} else {
struct drm_display_mode *mode = drm_mode_create(connector->dev);
- struct fb_videomode *timing;
+ struct exynos_drm_panel_info *panel;
- if (display_ops->get_timing)
- timing = display_ops->get_timing(manager->dev);
+ if (display_ops->get_panel)
+ panel = display_ops->get_panel(manager->dev);
else {
drm_mode_destroy(connector->dev, mode);
return 0;
}
- convert_to_display_mode(mode, timing);
+ convert_to_display_mode(mode, panel);
+ connector->display_info.width_mm = mode->width_mm;
+ connector->display_info.height_mm = mode->height_mm;
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
drm_mode_set_name(mode);
return err;
}
+ /* setup possible_clones. */
+ exynos_drm_encoder_setup(drm_dev);
+
/*
* if any specific driver such as fimd or hdmi driver called
* exynos_drm_subdrv_register() later than drm_load(),
*/
event->pipe = exynos_crtc->pipe;
- list_add_tail(&event->base.link,
- &dev_priv->pageflip_event_list);
-
ret = drm_vblank_get(dev, exynos_crtc->pipe);
if (ret) {
DRM_DEBUG("failed to acquire vblank counter\n");
goto out;
}
+ list_add_tail(&event->base.link,
+ &dev_priv->pageflip_event_list);
+
crtc->fb = fb;
ret = exynos_drm_crtc_update(crtc);
if (ret) {
#include "exynos_drm_drv.h"
#include "exynos_drm_crtc.h"
+#include "exynos_drm_encoder.h"
#include "exynos_drm_fbdev.h"
#include "exynos_drm_fb.h"
#include "exynos_drm_gem.h"
if (ret)
goto err_vblank;
+ /* setup possible_clones. */
+ exynos_drm_encoder_setup(dev);
+
/*
* create and configure fb helper and also exynos specific
* fbdev object.
}
static void exynos_drm_preclose(struct drm_device *dev,
- struct drm_file *file_priv)
+ struct drm_file *file)
{
- struct exynos_drm_private *dev_priv = dev->dev_private;
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
- /*
- * drm framework frees all events at release time,
- * so private event list should be cleared.
- */
- if (!list_empty(&dev_priv->pageflip_event_list))
- INIT_LIST_HEAD(&dev_priv->pageflip_event_list);
+}
+
+static void exynos_drm_postclose(struct drm_device *dev, struct drm_file *file)
+{
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ if (!file->driver_priv)
+ return;
+
+ kfree(file->driver_priv);
+ file->driver_priv = NULL;
}
static void exynos_drm_lastclose(struct drm_device *dev)
.unload = exynos_drm_unload,
.preclose = exynos_drm_preclose,
.lastclose = exynos_drm_lastclose,
+ .postclose = exynos_drm_postclose,
.get_vblank_counter = drm_vblank_count,
.enable_vblank = exynos_drm_crtc_enable_vblank,
.disable_vblank = exynos_drm_crtc_disable_vblank,
* @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI.
* @is_connected: check for that display is connected or not.
* @get_edid: get edid modes from display driver.
- * @get_timing: get timing object from display driver.
+ * @get_panel: get panel object from display driver.
* @check_timing: check if timing is valid or not.
* @power_on: display device on or off.
*/
bool (*is_connected)(struct device *dev);
int (*get_edid)(struct device *dev, struct drm_connector *connector,
u8 *edid, int len);
- void *(*get_timing)(struct device *dev);
+ void *(*get_panel)(struct device *dev);
int (*check_timing)(struct device *dev, void *timing);
int (*power_on)(struct device *dev, int mode);
};
.destroy = exynos_drm_encoder_destroy,
};
+static unsigned int exynos_drm_encoder_clones(struct drm_encoder *encoder)
+{
+ struct drm_encoder *clone;
+ struct drm_device *dev = encoder->dev;
+ struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
+ struct exynos_drm_display_ops *display_ops =
+ exynos_encoder->manager->display_ops;
+ unsigned int clone_mask = 0;
+ int cnt = 0;
+
+ list_for_each_entry(clone, &dev->mode_config.encoder_list, head) {
+ switch (display_ops->type) {
+ case EXYNOS_DISPLAY_TYPE_LCD:
+ case EXYNOS_DISPLAY_TYPE_HDMI:
+ clone_mask |= (1 << (cnt++));
+ break;
+ default:
+ continue;
+ }
+ }
+
+ return clone_mask;
+}
+
+void exynos_drm_encoder_setup(struct drm_device *dev)
+{
+ struct drm_encoder *encoder;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
+ encoder->possible_clones = exynos_drm_encoder_clones(encoder);
+}
+
struct drm_encoder *
exynos_drm_encoder_create(struct drm_device *dev,
struct exynos_drm_manager *manager,
struct exynos_drm_manager;
+void exynos_drm_encoder_setup(struct drm_device *dev);
struct drm_encoder *exynos_drm_encoder_create(struct drm_device *dev,
struct exynos_drm_manager *mgr,
unsigned int possible_crtcs);
return ret;
}
-static bool
-exynos_drm_fbdev_is_samefb(struct drm_framebuffer *fb,
- struct drm_fb_helper_surface_size *sizes)
-{
- if (fb->width != sizes->surface_width)
- return false;
- if (fb->height != sizes->surface_height)
- return false;
- if (fb->bits_per_pixel != sizes->surface_bpp)
- return false;
- if (fb->depth != sizes->surface_depth)
- return false;
-
- return true;
-}
-
-static int exynos_drm_fbdev_recreate(struct drm_fb_helper *helper,
- struct drm_fb_helper_surface_size *sizes)
-{
- struct drm_device *dev = helper->dev;
- struct exynos_drm_fbdev *exynos_fbdev = to_exynos_fbdev(helper);
- struct exynos_drm_gem_obj *exynos_gem_obj;
- struct drm_framebuffer *fb = helper->fb;
- struct drm_mode_fb_cmd2 mode_cmd = { 0 };
- unsigned long size;
-
- DRM_DEBUG_KMS("%s\n", __FILE__);
-
- if (exynos_drm_fbdev_is_samefb(fb, sizes))
- return 0;
-
- mode_cmd.width = sizes->surface_width;
- mode_cmd.height = sizes->surface_height;
- mode_cmd.pitches[0] = sizes->surface_width * (sizes->surface_bpp >> 3);
- mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
- sizes->surface_depth);
-
- if (exynos_fbdev->exynos_gem_obj)
- exynos_drm_gem_destroy(exynos_fbdev->exynos_gem_obj);
-
- if (fb->funcs->destroy)
- fb->funcs->destroy(fb);
-
- size = mode_cmd.pitches[0] * mode_cmd.height;
- exynos_gem_obj = exynos_drm_gem_create(dev, size);
- if (IS_ERR(exynos_gem_obj))
- return PTR_ERR(exynos_gem_obj);
-
- exynos_fbdev->exynos_gem_obj = exynos_gem_obj;
-
- helper->fb = exynos_drm_framebuffer_init(dev, &mode_cmd,
- &exynos_gem_obj->base);
- if (IS_ERR_OR_NULL(helper->fb)) {
- DRM_ERROR("failed to create drm framebuffer.\n");
- return PTR_ERR(helper->fb);
- }
-
- return exynos_drm_fbdev_update(helper, helper->fb);
-}
-
static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper,
struct drm_fb_helper_surface_size *sizes)
{
DRM_DEBUG_KMS("%s\n", __FILE__);
+ /*
+ * with !helper->fb, it means that this funcion is called first time
+ * and after that, the helper->fb would be used as clone mode.
+ */
if (!helper->fb) {
ret = exynos_drm_fbdev_create(helper, sizes);
if (ret < 0) {
* because register_framebuffer() should be called.
*/
ret = 1;
- } else {
- ret = exynos_drm_fbdev_recreate(helper, sizes);
- if (ret < 0) {
- DRM_ERROR("failed to reconfigure fbdev\n");
- return ret;
- }
}
return ret;
bool suspended;
struct mutex lock;
- struct fb_videomode *timing;
+ struct exynos_drm_panel_info *panel;
};
static bool fimd_display_is_connected(struct device *dev)
return true;
}
-static void *fimd_get_timing(struct device *dev)
+static void *fimd_get_panel(struct device *dev)
{
struct fimd_context *ctx = get_fimd_context(dev);
DRM_DEBUG_KMS("%s\n", __FILE__);
- return ctx->timing;
+ return ctx->panel;
}
static int fimd_check_timing(struct device *dev, void *timing)
static struct exynos_drm_display_ops fimd_display_ops = {
.type = EXYNOS_DISPLAY_TYPE_LCD,
.is_connected = fimd_display_is_connected,
- .get_timing = fimd_get_timing,
+ .get_panel = fimd_get_panel,
.check_timing = fimd_check_timing,
.power_on = fimd_display_power_on,
};
static void fimd_commit(struct device *dev)
{
struct fimd_context *ctx = get_fimd_context(dev);
- struct fb_videomode *timing = ctx->timing;
+ struct exynos_drm_panel_info *panel = ctx->panel;
+ struct fb_videomode *timing = &panel->timing;
u32 val;
if (ctx->suspended)
}
if (is_checked) {
- drm_vblank_put(drm_dev, crtc);
+ /*
+ * call drm_vblank_put only in case that drm_vblank_get was
+ * called.
+ */
+ if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0)
+ drm_vblank_put(drm_dev, crtc);
/*
* don't off vblank if vblank_disable_allowed is 1,
struct fimd_context *ctx;
struct exynos_drm_subdrv *subdrv;
struct exynos_drm_fimd_pdata *pdata;
- struct fb_videomode *timing;
+ struct exynos_drm_panel_info *panel;
struct resource *res;
int win;
int ret = -EINVAL;
return -EINVAL;
}
- timing = &pdata->timing;
- if (!timing) {
- dev_err(dev, "timing is null.\n");
+ panel = &pdata->panel;
+ if (!panel) {
+ dev_err(dev, "panel is null.\n");
return -EINVAL;
}
goto err_req_irq;
}
- ctx->clkdiv = fimd_calc_clkdiv(ctx, timing);
+ ctx->clkdiv = fimd_calc_clkdiv(ctx, &panel->timing);
ctx->vidcon0 = pdata->vidcon0;
ctx->vidcon1 = pdata->vidcon1;
ctx->default_win = pdata->default_win;
- ctx->timing = timing;
+ ctx->panel = panel;
- timing->pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
+ panel->timing.pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n",
- timing->pixclock, ctx->clkdiv);
+ panel->timing.pixclock, ctx->clkdiv);
subdrv = &ctx->subdrv;
}
if (is_checked)
- drm_vblank_put(drm_dev, crtc);
+ /*
+ * call drm_vblank_put only in case that drm_vblank_get was
+ * called.
+ */
+ if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0)
+ drm_vblank_put(drm_dev, crtc);
spin_unlock_irqrestore(&drm_dev->event_lock, flags);
}
mixer_reg_writemask(res, MXR_STATUS, MXR_STATUS_16_BURST,
MXR_STATUS_BURST_MASK);
- /* setting default layer priority: layer1 > video > layer0
+ /* setting default layer priority: layer1 > layer0 > video
* because typical usage scenario would be
+ * layer1 - OSD
* layer0 - framebuffer
* video - video overlay
- * layer1 - OSD
*/
- val = MXR_LAYER_CFG_GRP0_VAL(1);
- val |= MXR_LAYER_CFG_VP_VAL(2);
- val |= MXR_LAYER_CFG_GRP1_VAL(3);
+ val = MXR_LAYER_CFG_GRP1_VAL(3);
+ val |= MXR_LAYER_CFG_GRP0_VAL(2);
+ val |= MXR_LAYER_CFG_VP_VAL(1);
mixer_reg_write(res, MXR_LAYER_CFG, val);
/* setting background color */
platform_get_drvdata(pdev);
struct mixer_context *ctx = (struct mixer_context *)drm_hdmi_ctx->ctx;
- dev_info(dev, "remove sucessful\n");
+ dev_info(dev, "remove successful\n");
mixer_resource_poweroff(ctx);
mixer_resources_cleanup(ctx);
#define DISP_TILE_SURFACE_SWIZZLING (1<<13)
#define DISP_FBC_WM_DIS (1<<15)
+/* GEN7 chicken */
+#define GEN7_COMMON_SLICE_CHICKEN1 0x7010
+# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26))
+
+#define GEN7_L3CNTLREG1 0xB01C
+#define GEN7_WA_FOR_GEN7_L3_CONTROL 0x3C4FFF8C
+
+#define GEN7_L3_CHICKEN_MODE_REGISTER 0xB030
+#define GEN7_WA_L3_CHICKEN_MODE 0x20000000
+
+/* WaCatErrorRejectionIssue */
+#define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG 0x9030
+#define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11)
+
/* PCH */
/* south display engine interrupt */
#define GT_FIFO_NUM_RESERVED_ENTRIES 20
#define GEN6_UCGCTL2 0x9404
+# define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13)
# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12)
# define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11)
if (enable_fbc < 0) {
DRM_DEBUG_KMS("fbc set to per-chip default\n");
enable_fbc = 1;
- if (INTEL_INFO(dev)->gen <= 5)
+ if (INTEL_INFO(dev)->gen <= 6)
enable_fbc = 0;
}
if (!enable_fbc) {
crtc = intel_get_crtc_for_plane(dev, plane);
clock = crtc->mode.clock;
+ if (!clock) {
+ *sprite_wm = 0;
+ return false;
+ }
line_time_us = (sprite_width * 1000) / clock;
+ if (!line_time_us) {
+ *sprite_wm = 0;
+ return false;
+ }
+
line_count = (latency_ns / line_time_us + 1000) / 1000;
line_size = sprite_width * pixel_size;
}
}
+ pipeconf &= ~PIPECONF_INTERLACE_MASK;
if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
/* the chip adds 2 halflines automatically */
adjusted_mode->crtc_vsync_end -= 1;
adjusted_mode->crtc_vsync_start -= 1;
} else
- pipeconf &= ~PIPECONF_INTERLACE_MASK; /* progressive */
+ pipeconf |= PIPECONF_PROGRESSIVE;
I915_WRITE(HTOTAL(pipe),
(adjusted_mode->crtc_hdisplay - 1) |
}
}
+ pipeconf &= ~PIPECONF_INTERLACE_MASK;
if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
/* the chip adds 2 halflines automatically */
adjusted_mode->crtc_vsync_end -= 1;
adjusted_mode->crtc_vsync_start -= 1;
} else
- pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */
+ pipeconf |= PIPECONF_PROGRESSIVE;
I915_WRITE(HTOTAL(pipe),
(adjusted_mode->crtc_hdisplay - 1) |
int i;
/* The clocks have to be on to load the palette. */
- if (!crtc->enabled)
+ if (!crtc->enabled || !intel_crtc->active)
return;
/* use legacy palette for Ironlake */
mode_cmd.height = mode->vdisplay;
mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
bpp);
- mode_cmd.pixel_format = 0;
+ mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
return intel_framebuffer_create(dev, &mode_cmd, obj);
}
I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
if (intel_enable_rc6(dev_priv->dev))
- rc6_mask = GEN6_RC_CTL_RC6p_ENABLE |
- GEN6_RC_CTL_RC6_ENABLE;
+ rc6_mask = GEN6_RC_CTL_RC6_ENABLE |
+ ((IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0);
I915_WRITE(GEN6_RC_CONTROL,
rc6_mask |
I915_WRITE(WM2_LP_ILK, 0);
I915_WRITE(WM1_LP_ILK, 0);
+ /* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+ * This implements the WaDisableRCZUnitClockGating workaround.
+ */
+ I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
+
I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
I915_WRITE(IVB_CHICKEN3,
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
CHICKEN3_DGMG_DONE_FIX_DISABLE);
+ /* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */
+ I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
+ GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
+
+ /* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */
+ I915_WRITE(GEN7_L3CNTLREG1,
+ GEN7_WA_FOR_GEN7_L3_CONTROL);
+ I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
+ GEN7_WA_L3_CHICKEN_MODE);
+
+ /* This is required by WaCatErrorRejectionIssue */
+ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+ I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+ GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
+
for_each_pipe(pipe) {
I915_WRITE(DSPCNTR(pipe),
I915_READ(DSPCNTR(pipe)) |
*/
static int
-intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock, int check_bpp)
+intel_dp_link_required(int pixel_clock, int bpp)
{
- struct drm_crtc *crtc = intel_dp->base.base.crtc;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int bpp = 24;
-
- if (check_bpp)
- bpp = check_bpp;
- else if (intel_crtc)
- bpp = intel_crtc->bpp;
-
return (pixel_clock * bpp + 9) / 10;
}
return MODE_PANEL;
}
- mode_rate = intel_dp_link_required(intel_dp, mode->clock, 0);
+ mode_rate = intel_dp_link_required(mode->clock, 24);
max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
if (mode_rate > max_rate) {
- mode_rate = intel_dp_link_required(intel_dp,
- mode->clock, 18);
+ mode_rate = intel_dp_link_required(mode->clock, 18);
if (mode_rate > max_rate)
return MODE_CLOCK_HIGH;
else
int lane_count, clock;
int max_lane_count = intel_dp_max_lane_count(intel_dp);
int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
- int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 0;
+ int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24;
static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
- if (intel_dp_link_required(intel_dp, mode->clock, bpp)
+ if (intel_dp_link_required(mode->clock, bpp)
<= link_avail) {
intel_dp->link_bw = bws[clock];
intel_dp->lane_count = lane_count;
DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
},
},
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "AOpen i45GMx-I",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i45GMx-I"),
+ },
+ },
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Aopen i945GTt-VFA",
I915_WRITE_CTL(ring,
((ring->size - PAGE_SIZE) & RING_NR_PAGES)
- | RING_REPORT_64K | RING_VALID);
+ | RING_VALID);
/* If the head is still not zero, the ring is dead */
if ((I915_READ_CTL(ring) & RING_VALID) == 0 ||
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long end;
- u32 head;
-
- /* If the reported head position has wrapped or hasn't advanced,
- * fallback to the slow and accurate path.
- */
- head = intel_read_status_page(ring, 4);
- if (head > ring->head) {
- ring->head = head;
- ring->space = ring_space(ring);
- if (ring->space >= n)
- return 0;
- }
trace_i915_ring_wait_begin(ring);
if (drm_core_check_feature(dev, DRIVER_GEM))
if (r) {
DRM_ERROR("radeon: failed testing IB (%d).\n", r);
rdev->accel_working = false;
+ return r;
}
r = r600_audio_init(rdev);
r = evergreen_startup(rdev);
if (r) {
DRM_ERROR("evergreen startup failed on resume\n");
+ rdev->accel_working = false;
return r;
}
r = cayman_startup(rdev);
if (r) {
DRM_ERROR("cayman startup failed on resume\n");
+ rdev->accel_working = false;
return r;
}
return r;
WREG32(RADEON_AIC_CNTL, msi_rearm | RS400_MSI_REARM);
break;
default:
- msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN;
- WREG32(RADEON_MSI_REARM_EN, msi_rearm);
- WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN);
+ WREG32(RADEON_MSI_REARM_EN, RV370_MSI_REARM_EN);
break;
}
}
int r100_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCI)
r100_pci_gart_disable(rdev);
radeon_surface_init(rdev);
rdev->accel_working = true;
- return r100_startup(rdev);
+ r = r100_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int r100_suspend(struct radeon_device *rdev)
int r300_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_disable(rdev);
radeon_surface_init(rdev);
rdev->accel_working = true;
- return r300_startup(rdev);
+ r = r300_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int r300_suspend(struct radeon_device *rdev)
int r420_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_disable(rdev);
radeon_surface_init(rdev);
rdev->accel_working = true;
- return r420_startup(rdev);
+ r = r420_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int r420_suspend(struct radeon_device *rdev)
int r520_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_disable(rdev);
radeon_surface_init(rdev);
rdev->accel_working = true;
- return r520_startup(rdev);
+ r = r520_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int r520_init(struct radeon_device *rdev)
r = r600_startup(rdev);
if (r) {
DRM_ERROR("r600 startup failed on resume\n");
+ rdev->accel_working = false;
return r;
}
h0 = G_038004_TEX_HEIGHT(word1) + 1;
d0 = G_038004_TEX_DEPTH(word1);
nfaces = 1;
+ array = 0;
switch (G_038000_DIM(word0)) {
case V_038000_SQ_TEX_DIM_1D:
case V_038000_SQ_TEX_DIM_2D:
bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP5;
}
}
+ if ((radeon_encoder->devices & ATOM_DEVICE_DFP6_SUPPORT) &&
+ (radeon_connector->devices & ATOM_DEVICE_DFP6_SUPPORT)) {
+ if (connected) {
+ DRM_DEBUG_KMS("DFP6 connected\n");
+ bios_0_scratch |= ATOM_S0_DFP6;
+ bios_3_scratch |= ATOM_S3_DFP6_ACTIVE;
+ bios_6_scratch |= ATOM_S6_ACC_REQ_DFP6;
+ } else {
+ DRM_DEBUG_KMS("DFP6 disconnected\n");
+ bios_0_scratch &= ~ATOM_S0_DFP6;
+ bios_3_scratch &= ~ATOM_S3_DFP6_ACTIVE;
+ bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP6;
+ }
+ }
if (rdev->family >= CHIP_R600) {
WREG32(R600_BIOS_0_SCRATCH, bios_0_scratch);
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
uint32_t bios_3_scratch;
+ if (ASIC_IS_DCE4(rdev))
+ return;
+
if (rdev->family >= CHIP_R600)
bios_3_scratch = RREG32(R600_BIOS_3_SCRATCH);
else
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
uint32_t bios_2_scratch;
+ if (ASIC_IS_DCE4(rdev))
+ return;
+
if (rdev->family >= CHIP_R600)
bios_2_scratch = RREG32(R600_BIOS_2_SCRATCH);
else
(connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) {
struct drm_display_mode *mode;
- if (!radeon_dig_connector->edp_on)
- atombios_set_edp_panel_power(connector,
- ATOM_TRANSMITTER_ACTION_POWER_ON);
- ret = radeon_ddc_get_modes(radeon_connector);
- if (!radeon_dig_connector->edp_on)
- atombios_set_edp_panel_power(connector,
- ATOM_TRANSMITTER_ACTION_POWER_OFF);
+ if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+ if (!radeon_dig_connector->edp_on)
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_ON);
+ ret = radeon_ddc_get_modes(radeon_connector);
+ if (!radeon_dig_connector->edp_on)
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_OFF);
+ } else {
+ /* need to setup ddc on the bridge */
+ if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) !=
+ ENCODER_OBJECT_ID_NONE) {
+ if (encoder)
+ radeon_atom_ext_encoder_setup_ddc(encoder);
+ }
+ ret = radeon_ddc_get_modes(radeon_connector);
+ }
if (ret > 0) {
if (encoder) {
return ret;
}
- encoder = radeon_best_single_encoder(connector);
if (!encoder)
return 0;
int r;
radeon_mutex_lock(&rdev->cs_mutex);
+ if (!rdev->accel_working) {
+ radeon_mutex_unlock(&rdev->cs_mutex);
+ return -EBUSY;
+ }
/* initialize parser */
memset(&parser, 0, sizeof(struct radeon_cs_parser));
parser.filp = filp;
int not_processed = 0;
read_lock_irqsave(&rdev->fence_lock, irq_flags);
- if (!rdev->fence_drv[ring].initialized)
+ if (!rdev->fence_drv[ring].initialized) {
+ read_unlock_irqrestore(&rdev->fence_lock, irq_flags);
return 0;
+ }
if (!list_empty(&rdev->fence_drv[ring].emitted)) {
struct list_head *ptr;
if (bo_va == NULL)
return 0;
- list_del(&bo_va->bo_list);
mutex_lock(&vm->mutex);
radeon_mutex_lock(&rdev->cs_mutex);
radeon_vm_bo_update_pte(rdev, vm, bo, NULL);
radeon_mutex_unlock(&rdev->cs_mutex);
list_del(&bo_va->vm_list);
mutex_unlock(&vm->mutex);
+ list_del(&bo_va->bo_list);
kfree(bo_va);
return 0;
int radeon_debugfs_ring_init(struct radeon_device *rdev)
{
#if defined(CONFIG_DEBUG_FS)
- return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list,
- ARRAY_SIZE(radeon_debugfs_ring_info_list));
+ if (rdev->family >= CHIP_CAYMAN)
+ return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list,
+ ARRAY_SIZE(radeon_debugfs_ring_info_list));
+ else
+ return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list, 1);
#else
return 0;
#endif
int rs400_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
rs400_gart_disable(rdev);
/* Resume clock before doing reset */
radeon_surface_init(rdev);
rdev->accel_working = true;
- return rs400_startup(rdev);
+ r = rs400_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int rs400_suspend(struct radeon_device *rdev)
WREG32(RADEON_BUS_CNTL, msi_rearm | RS600_MSI_REARM);
break;
default:
- msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN;
- WREG32(RADEON_MSI_REARM_EN, msi_rearm);
- WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN);
+ WREG32(RADEON_MSI_REARM_EN, RV370_MSI_REARM_EN);
break;
}
}
int rs600_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
rs600_gart_disable(rdev);
/* Resume clock before doing reset */
radeon_surface_init(rdev);
rdev->accel_working = true;
- return rs600_startup(rdev);
+ r = rs600_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int rs600_suspend(struct radeon_device *rdev)
int rs690_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
rs400_gart_disable(rdev);
/* Resume clock before doing reset */
radeon_surface_init(rdev);
rdev->accel_working = true;
- return rs690_startup(rdev);
+ r = rs690_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int rs690_suspend(struct radeon_device *rdev)
int rv515_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_disable(rdev);
radeon_surface_init(rdev);
rdev->accel_working = true;
- return rv515_startup(rdev);
+ r = rv515_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int rv515_suspend(struct radeon_device *rdev)
r = rv770_startup(rdev);
if (r) {
DRM_ERROR("r600 startup failed on resume\n");
+ rdev->accel_working = false;
return r;
}
struct mousevsc_dev *input_dev = hv_get_drvdata(dev);
vmbus_close(dev->channel);
+ hid_hw_stop(input_dev->hid_device);
hid_destroy_device(input_dev->hid_device);
mousevsc_free_device(input_dev);
#define USB_VENDOR_ID_AIRCABLE 0x16CA
#define USB_DEVICE_ID_AIRCABLE1 0x1502
+#define USB_VENDOR_ID_AIREN 0x1a2c
+#define USB_DEVICE_ID_AIREN_SLIMPLUS 0x0002
+
#define USB_VENDOR_ID_ALCOR 0x058f
#define USB_DEVICE_ID_ALCOR_USBRS232 0x9720
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_MODEL_NAME,
- POWER_SUPPLY_PROP_STATUS
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_SCOPE,
};
#define HID_BATTERY_QUIRK_PERCENT (1 << 0) /* always reports percent */
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
break;
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+ break;
+
default:
ret = -EINVAL;
break;
battery->name = NULL;
}
+ power_supply_powers(battery, &dev->dev);
+
out:
return true;
}
return;
}
- /* Ignore out-of-range values as per HID specification, section 5.10 */
- if (value < field->logical_minimum || value > field->logical_maximum) {
+ /*
+ * Ignore out-of-range values as per HID specification,
+ * section 5.10 and 6.2.25
+ */
+ if ((field->flags & HID_MAIN_ITEM_VARIABLE) &&
+ (value < field->logical_minimum ||
+ value > field->logical_maximum)) {
dbg_hid("Ignoring out-of-range value %x\n", value);
return;
}
dj_report.report_id = REPORT_ID_DJ_SHORT;
dj_report.device_index = 0xFF;
dj_report.report_type = REPORT_TYPE_CMD_SWITCH;
- dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x1F;
+ dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
return logi_dj_recv_send_report(djrcv_dev, &dj_report);
}
wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
wdata->battery.use_for_apm = 0;
- power_supply_powers(&wdata->battery, &hdev->dev);
ret = power_supply_register(&hdev->dev, &wdata->battery);
if (ret) {
goto err_battery;
}
+ power_supply_powers(&wdata->battery, &hdev->dev);
+
wdata->ac.properties = wacom_ac_props;
wdata->ac.num_properties = ARRAY_SIZE(wacom_ac_props);
wdata->ac.get_property = wacom_ac_get_property;
wdata->ac.type = POWER_SUPPLY_TYPE_MAINS;
wdata->ac.use_for_apm = 0;
- power_supply_powers(&wdata->battery, &hdev->dev);
-
ret = power_supply_register(&hdev->dev, &wdata->ac);
if (ret) {
hid_warn(hdev,
"can't create ac battery attribute, err: %d\n", ret);
goto err_ac;
}
+
+ power_supply_powers(&wdata->ac, &hdev->dev);
#endif
return 0;
wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
wdata->battery.use_for_apm = 0;
- power_supply_powers(&wdata->battery, &hdev->dev);
-
ret = power_supply_register(&wdata->hdev->dev, &wdata->battery);
if (ret) {
hid_err(hdev, "Cannot register battery device\n");
goto err_battery;
}
+ power_supply_powers(&wdata->battery, &hdev->dev);
+
ret = wiimote_leds_create(wdata);
if (ret)
goto err_free;
{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_AIREN, USB_DEVICE_ID_AIREN_SLIMPLUS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
struct hiddev *hiddev = hid->hiddev;
struct usbhid_device *usbhid = hid->driver_data;
+ usb_deregister_dev(usbhid->intf, &hiddev_class);
+
mutex_lock(&hiddev->existancelock);
hiddev->exist = 0;
- usb_deregister_dev(usbhid->intf, &hiddev_class);
-
if (hiddev->open) {
mutex_unlock(&hiddev->existancelock);
usbhid_close(hiddev->hid);
continue;
err = device_create_file(&client->dev, &ads1015_in[k].dev_attr);
if (err)
- goto exit_free;
+ goto exit_remove;
}
data->hwmon_dev = hwmon_device_register(&client->dev);
exit_remove:
for (k = 0; k < ADS1015_CHANNELS; ++k)
device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
-exit_free:
kfree(data);
exit:
return err;
static inline void f75375_write16(struct i2c_client *client, u8 reg,
u16 value)
{
- int err = i2c_smbus_write_byte_data(client, reg, (value << 8));
+ int err = i2c_smbus_write_byte_data(client, reg, (value >> 8));
if (err)
return;
i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF));
}
+static void f75375_write_pwm(struct i2c_client *client, int nr)
+{
+ struct f75375_data *data = i2c_get_clientdata(client);
+ if (data->kind == f75387)
+ f75375_write16(client, F75375_REG_FAN_EXP(nr), data->pwm[nr]);
+ else
+ f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+ data->pwm[nr]);
+}
+
static struct f75375_data *f75375_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
f75375_read16(client, F75375_REG_FAN_MIN(nr));
data->fan_target[nr] =
f75375_read16(client, F75375_REG_FAN_EXP(nr));
- data->pwm[nr] = f75375_read8(client,
- F75375_REG_FAN_PWM_DUTY(nr));
-
}
for (nr = 0; nr < 4; nr++) {
data->in_max[nr] =
if (time_after(jiffies, data->last_updated + 2 * HZ)
|| !data->valid) {
for (nr = 0; nr < 2; nr++) {
+ data->pwm[nr] = f75375_read8(client,
+ F75375_REG_FAN_PWM_DUTY(nr));
/* assign MSB, therefore shift it by 8 bits */
data->temp11[nr] =
f75375_read8(client, F75375_REG_TEMP(nr)) << 8;
return 1500000 / rpm;
}
+static bool duty_mode_enabled(u8 pwm_enable)
+{
+ switch (pwm_enable) {
+ case 0: /* Manual, duty mode (full speed) */
+ case 1: /* Manual, duty mode */
+ case 4: /* Auto, duty mode */
+ return true;
+ case 2: /* Auto, speed mode */
+ case 3: /* Manual, speed mode */
+ return false;
+ default:
+ BUG();
+ }
+}
+
+static bool auto_mode_enabled(u8 pwm_enable)
+{
+ switch (pwm_enable) {
+ case 0: /* Manual, duty mode (full speed) */
+ case 1: /* Manual, duty mode */
+ case 3: /* Manual, speed mode */
+ return false;
+ case 2: /* Auto, speed mode */
+ case 4: /* Auto, duty mode */
+ return true;
+ default:
+ BUG();
+ }
+}
+
static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
if (err < 0)
return err;
+ if (auto_mode_enabled(data->pwm_enable[nr]))
+ return -EINVAL;
+ if (data->kind == f75387 && duty_mode_enabled(data->pwm_enable[nr]))
+ return -EINVAL;
+
mutex_lock(&data->update_lock);
data->fan_target[nr] = rpm_to_reg(val);
f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_target[nr]);
if (err < 0)
return err;
+ if (auto_mode_enabled(data->pwm_enable[nr]) ||
+ !duty_mode_enabled(data->pwm_enable[nr]))
+ return -EINVAL;
+
mutex_lock(&data->update_lock);
data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), data->pwm[nr]);
+ f75375_write_pwm(client, nr);
mutex_unlock(&data->update_lock);
return count;
}
struct f75375_data *data = i2c_get_clientdata(client);
u8 fanmode;
- if (val < 0 || val > 3)
+ if (val < 0 || val > 4)
return -EINVAL;
fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
if (data->kind == f75387) {
+ /* For now, deny dangerous toggling of duty mode */
+ if (duty_mode_enabled(data->pwm_enable[nr]) !=
+ duty_mode_enabled(val))
+ return -EOPNOTSUPP;
/* clear each fanX_mode bit before setting them properly */
fanmode &= ~(1 << F75387_FAN_DUTY_MODE(nr));
fanmode &= ~(1 << F75387_FAN_MANU_MODE(nr));
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
data->pwm[nr] = 255;
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
break;
case 1: /* PWM */
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
break;
- case 2: /* AUTOMATIC*/
- fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
+ case 2: /* Automatic, speed mode */
break;
case 3: /* fan speed */
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
break;
+ case 4: /* Automatic, pwm */
+ fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
+ break;
}
} else {
/* clear each fanX_mode bit before setting them properly */
case 0: /* full speed */
fanmode |= (3 << FAN_CTRL_MODE(nr));
data->pwm[nr] = 255;
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
break;
case 1: /* PWM */
fanmode |= (3 << FAN_CTRL_MODE(nr));
break;
case 2: /* AUTOMATIC*/
- fanmode |= (2 << FAN_CTRL_MODE(nr));
+ fanmode |= (1 << FAN_CTRL_MODE(nr));
break;
case 3: /* fan speed */
break;
+ case 4: /* Automatic pwm */
+ return -EINVAL;
}
}
f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
data->pwm_enable[nr] = val;
+ if (val == 0)
+ f75375_write_pwm(client, nr);
return 0;
}
if (data->kind == f75387) {
bool manu, duty;
- if (!(conf & (1 << F75387_FAN_CTRL_LINEAR(nr))))
+ if (!(mode & (1 << F75387_FAN_CTRL_LINEAR(nr))))
data->pwm_mode[nr] = 1;
manu = ((mode >> F75387_FAN_MANU_MODE(nr)) & 1);
duty = ((mode >> F75387_FAN_DUTY_MODE(nr)) & 1);
- if (manu && duty)
- /* speed */
+ if (!manu && duty)
+ /* auto, pwm */
+ data->pwm_enable[nr] = 4;
+ else if (manu && !duty)
+ /* manual, speed */
data->pwm_enable[nr] = 3;
- else if (!manu && duty)
- /* automatic */
+ else if (!manu && !duty)
+ /* automatic, speed */
data->pwm_enable[nr] = 2;
else
- /* manual */
+ /* manual, pwm */
data->pwm_enable[nr] = 1;
} else {
if (!(conf & (1 << F75375_FAN_CTRL_LINEAR(nr))))
set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]);
set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]);
for (nr = 0; nr < 2; nr++) {
+ if (auto_mode_enabled(f75375s_pdata->pwm_enable[nr]) ||
+ !duty_mode_enabled(f75375s_pdata->pwm_enable[nr]))
+ continue;
data->pwm[nr] = SENSORS_LIMIT(f75375s_pdata->pwm[nr], 0, 255);
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
+ f75375_write_pwm(client, nr);
}
}
if (err)
goto exit_free;
- if (data->kind == f75375) {
+ if (data->kind != f75373) {
err = sysfs_chmod_file(&client->dev.kobj,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
S_IRUGO | S_IWUSR);
static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
-#define FAN_FROM_REG(val, div, rpm_range) ((val) == 0 ? -1 : \
- (val) == 255 ? 0 : (rpm_ranges[rpm_range] * 30) / ((div + 1) * (val)))
+#define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \
+ 0 : (rpm_ranges[rpm_range] * 30) / (val))
#define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val) / 1000, 0, 255)
/*
return PTR_ERR(data);
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
- data->ppr, data->rpm_range));
+ data->rpm_range));
}
static ssize_t show_alarm(struct device *dev,
struct max6639_data *data = i2c_get_clientdata(client);
struct max6639_platform_data *max6639_info =
client->dev.platform_data;
- int i = 0;
+ int i;
int rpm_range = 1; /* default: 4000 RPM */
- int err = 0;
+ int err;
/* Reset chip to default values, see below for GCONFIG setup */
err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
else
data->ppr = 2;
data->ppr -= 1;
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_PPR(i),
- data->ppr << 5);
- if (err)
- goto exit;
if (max6639_info)
rpm_range = rpm_range_to_reg(max6639_info->rpm_range);
for (i = 0; i < 2; i++) {
+ /* Set Fan pulse per revolution */
+ err = i2c_smbus_write_byte_data(client,
+ MAX6639_REG_FAN_PPR(i),
+ data->ppr << 6);
+ if (err)
+ goto exit;
+
/* Fans config PWM, RPM */
err = i2c_smbus_write_byte_data(client,
MAX6639_REG_FAN_CONFIG1(i),
case PMBUS_VIRT_RESET_TEMP_HISTORY:
ret = pmbus_write_word_data(client, page,
MAX34440_MFR_TEMPERATURE_PEAK,
- 0xffff);
+ 0x8000);
break;
default:
ret = -ENODATA;
fan4min = 0;
fan5pin = 0;
} else if (sio_data->kind == nct6776) {
- fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);
- fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);
- fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);
+ bool gpok = superio_inb(sio_data->sioreg, 0x27) & 0x80;
+
+ superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
+ regval = superio_inb(sio_data->sioreg, SIO_REG_ENABLE);
+
+ if (regval & 0x80)
+ fan3pin = gpok;
+ else
+ fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);
+
+ if (regval & 0x40)
+ fan4pin = gpok;
+ else
+ fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);
+
+ if (regval & 0x20)
+ fan5pin = gpok;
+ else
+ fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);
+
fan4min = fan4pin;
} else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
fan3pin = 1;
/* Read fan clock dividers immediately */
w83627ehf_update_fan_div_common(dev, data);
- /* Read pwm data to save original values */
- w83627ehf_update_pwm_common(dev, data);
- for (i = 0; i < data->pwm_num; i++)
- data->pwm_enable_orig[i] = data->pwm_enable[i];
-
/* Read pwm data to save original values */
w83627ehf_update_pwm_common(dev, data);
for (i = 0; i < data->pwm_num; i++)
#define MXS_I2C_QUEUESTAT (0x70)
#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000
+#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F
#define MXS_I2C_QUEUECMD (0x80)
int ret;
int flags;
- init_completion(&i2c->cmd_complete);
-
dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
msg->addr, msg->len, msg->flags, stop);
if (msg->len == 0)
return -EINVAL;
+ init_completion(&i2c->cmd_complete);
+
flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
if (msg->flags & I2C_M_RD)
{
struct mxs_i2c_dev *i2c = dev_id;
u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
+ bool is_last_cmd;
if (!stat)
return IRQ_NONE;
else
i2c->cmd_err = 0;
- complete(&i2c->cmd_complete);
+ is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
+ MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
+
+ if (is_last_cmd || i2c->cmd_err)
+ complete(&i2c->cmd_complete);
writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
+
return IRQ_HANDLED;
}
goto err_release_region;
}
- match = of_match_device(omap_i2c_of_match, &pdev->dev);
+ match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
if (match) {
u32 freq = 100000; /* default to 100000 Hz */
static struct platform_driver tegra_i2c_driver = {
.probe = tegra_i2c_probe,
- .remove = tegra_i2c_remove,
+ .remove = __devexit_p(tegra_i2c_remove),
#ifdef CONFIG_PM
.suspend = tegra_i2c_suspend,
.resume = tegra_i2c_resume,
obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o
obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o
-obj-$(CONFIG_BLK_DEV_IDE_AT91) += at91_ide.o
+++ /dev/null
-/*
- * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
- * with Compact Flash True IDE logic
- *
- * Copyright (c) 2008, 2009 Kelvatek Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/ide.h>
-#include <linux/platform_device.h>
-
-#include <mach/board.h>
-#include <asm/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#define DRV_NAME "at91_ide"
-
-#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
-#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
-
-/*
- * Access to IDE device is possible through EBI Static Memory Controller
- * with Compact Flash logic. For details see EBI and SMC datasheet sections
- * of any microcontroller from AT91SAM9 family.
- *
- * Within SMC chip select address space, lines A[23:21] distinguish Compact
- * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
- * 0x00c0000 - True IDE
- * 0x00e0000 - Alternate True IDE (Alt Status Register)
- *
- * On True IDE mode Task File and Data Register are mapped at the same address.
- * To distinguish access between these two different bus data width is used:
- * 8Bit for Task File, 16Bit for Data I/O.
- *
- * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
- * only inside IDE callback routines which are serialized by IDE layer,
- * so no additional locking needed.
- */
-
-#define TASK_FILE 0x00c00000
-#define ALT_MODE 0x00e00000
-#define REGS_SIZE 8
-
-#define enter_16bit(cs, mode) do { \
- mode = at91_sys_read(AT91_SMC_MODE(cs)); \
- at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16); \
-} while (0)
-
-#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
-
-static void set_smc_timings(const u8 chipselect, const u16 cycle,
- const u16 setup, const u16 pulse,
- const u16 data_float, int use_iordy)
-{
- unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_BAT_SELECT;
-
- /* disable or enable waiting for IORDY signal */
- if (use_iordy)
- mode |= AT91_SMC_EXNWMODE_READY;
-
- /* add data float cycles if needed */
- if (data_float)
- mode |= AT91_SMC_TDF_(data_float);
-
- at91_sys_write(AT91_SMC_MODE(chipselect), mode);
-
- /* setup timings in SMC */
- at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
- AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(setup) |
- AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
- AT91_SMC_NCS_WRPULSE_(cycle) |
- AT91_SMC_NRDPULSE_(pulse) |
- AT91_SMC_NCS_RDPULSE_(cycle));
- at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
- AT91_SMC_NRDCYCLE_(cycle));
-}
-
-static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
-{
- u64 tmp = ns;
-
- tmp *= mck_hz;
- tmp += 1000*1000*1000 - 1; /* round up */
- do_div(tmp, 1000*1000*1000);
- return (unsigned int) tmp;
-}
-
-static void apply_timings(const u8 chipselect, const u8 pio,
- const struct ide_timing *timing, int use_iordy)
-{
- unsigned int t0, t1, t2, t6z;
- unsigned int cycle, setup, pulse, data_float;
- unsigned int mck_hz;
- struct clk *mck;
-
- /* see table 22 of Compact Flash standard 4.1 for the meaning,
- * we do not stretch active (t2) time, so setup (t1) + hold time (th)
- * assure at least minimal recovery (t2i) time */
- t0 = timing->cyc8b;
- t1 = timing->setup;
- t2 = timing->act8b;
- t6z = (pio < 5) ? 30 : 20;
-
- pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
-
- mck = clk_get(NULL, "mck");
- BUG_ON(IS_ERR(mck));
- mck_hz = clk_get_rate(mck);
- pdbg("mck_hz=%u\n", mck_hz);
-
- cycle = calc_mck_cycles(t0, mck_hz);
- setup = calc_mck_cycles(t1, mck_hz);
- pulse = calc_mck_cycles(t2, mck_hz);
- data_float = calc_mck_cycles(t6z, mck_hz);
-
- pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
- cycle, setup, pulse, data_float);
-
- set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
-}
-
-static void at91_ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- u8 chipselect = hwif->select_data;
- unsigned long mode;
-
- pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
-
- len++;
-
- enter_16bit(chipselect, mode);
- readsw((void __iomem *)io_ports->data_addr, buf, len / 2);
- leave_16bit(chipselect, mode);
-}
-
-static void at91_ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- u8 chipselect = hwif->select_data;
- unsigned long mode;
-
- pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
-
- enter_16bit(chipselect, mode);
- writesw((void __iomem *)io_ports->data_addr, buf, len / 2);
- leave_16bit(chipselect, mode);
-}
-
-static void at91_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct ide_timing *timing;
- u8 chipselect = hwif->select_data;
- int use_iordy = 0;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- pdbg("chipselect %u pio %u\n", chipselect, pio);
-
- timing = ide_timing_find_mode(XFER_PIO_0 + pio);
- BUG_ON(!timing);
-
- if (ide_pio_need_iordy(drive, pio))
- use_iordy = 1;
-
- apply_timings(chipselect, pio, timing, use_iordy);
-}
-
-static const struct ide_tp_ops at91_ide_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = at91_ide_input_data,
- .output_data = at91_ide_output_data,
-};
-
-static const struct ide_port_ops at91_ide_port_ops = {
- .set_pio_mode = at91_ide_set_pio_mode,
-};
-
-static const struct ide_port_info at91_ide_port_info __initdata = {
- .port_ops = &at91_ide_port_ops,
- .tp_ops = &at91_ide_tp_ops,
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
- IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
- .pio_mask = ATA_PIO6,
- .chipset = ide_generic,
-};
-
-/*
- * If interrupt is delivered through GPIO, IRQ are triggered on falling
- * and rising edge of signal. Whereas IDE device request interrupt on high
- * level (rising edge in our case). This mean we have fake interrupts, so
- * we need to check interrupt pin and exit instantly from ISR when line
- * is on low level.
- */
-
-irqreturn_t at91_irq_handler(int irq, void *dev_id)
-{
- int ntries = 8;
- int pin_val1, pin_val2;
-
- /* additional deglitch, line can be noisy in badly designed PCB */
- do {
- pin_val1 = at91_get_gpio_value(irq);
- pin_val2 = at91_get_gpio_value(irq);
- } while (pin_val1 != pin_val2 && --ntries > 0);
-
- if (pin_val1 == 0 || ntries <= 0)
- return IRQ_HANDLED;
-
- return ide_intr(irq, dev_id);
-}
-
-static int __init at91_ide_probe(struct platform_device *pdev)
-{
- int ret;
- struct ide_hw hw, *hws[] = { &hw };
- struct ide_host *host;
- struct resource *res;
- unsigned long tf_base = 0, ctl_base = 0;
- struct at91_cf_data *board = pdev->dev.platform_data;
-
- if (!board)
- return -ENODEV;
-
- if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
- perr("no device detected\n");
- return -ENODEV;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- perr("can't get memory resource\n");
- return -ENODEV;
- }
-
- if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
- REGS_SIZE, "ide") ||
- !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
- REGS_SIZE, "alt")) {
- perr("memory resources in use\n");
- return -EBUSY;
- }
-
- pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
- board->irq_pin, (unsigned long) res->start);
-
- tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
- REGS_SIZE);
- ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
- REGS_SIZE);
- if (!tf_base || !ctl_base) {
- perr("can't map memory regions\n");
- return -EBUSY;
- }
-
- memset(&hw, 0, sizeof(hw));
-
- if (board->flags & AT91_IDE_SWAP_A0_A2) {
- /* workaround for stupid hardware bug */
- hw.io_ports.data_addr = tf_base + 0;
- hw.io_ports.error_addr = tf_base + 4;
- hw.io_ports.nsect_addr = tf_base + 2;
- hw.io_ports.lbal_addr = tf_base + 6;
- hw.io_ports.lbam_addr = tf_base + 1;
- hw.io_ports.lbah_addr = tf_base + 5;
- hw.io_ports.device_addr = tf_base + 3;
- hw.io_ports.command_addr = tf_base + 7;
- hw.io_ports.ctl_addr = ctl_base + 3;
- } else
- ide_std_init_ports(&hw, tf_base, ctl_base + 6);
-
- hw.irq = board->irq_pin;
- hw.dev = &pdev->dev;
-
- host = ide_host_alloc(&at91_ide_port_info, hws, 1);
- if (!host) {
- perr("failed to allocate ide host\n");
- return -ENOMEM;
- }
-
- /* setup Static Memory Controller - PIO 0 as default */
- apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
-
- /* with GPIO interrupt we have to do quirks in handler */
- if (gpio_is_valid(board->irq_pin))
- host->irq_handler = at91_irq_handler;
-
- host->ports[0]->select_data = board->chipselect;
-
- ret = ide_host_register(host, &at91_ide_port_info, hws);
- if (ret) {
- perr("failed to register ide host\n");
- goto err_free_host;
- }
- platform_set_drvdata(pdev, host);
- return 0;
-
-err_free_host:
- ide_host_free(host);
- return ret;
-}
-
-static int __exit at91_ide_remove(struct platform_device *pdev)
-{
- struct ide_host *host = platform_get_drvdata(pdev);
-
- ide_host_remove(host);
- return 0;
-}
-
-static struct platform_driver at91_ide_driver = {
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
- .remove = __exit_p(at91_ide_remove),
-};
-
-static int __init at91_ide_init(void)
-{
- return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
-}
-
-static void __exit at91_ide_exit(void)
-{
- platform_driver_unregister(&at91_ide_driver);
-}
-
-module_init(at91_ide_init);
-module_exit(at91_ide_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
-
#include <linux/mutex.h>
#include <net/neighbour.h>
+#include <net/sch_generic.h>
#include <linux/atomic.h>
u16 reserved;
};
-struct ipoib_pseudoheader {
- u8 hwaddr[INFINIBAND_ALEN];
+struct ipoib_cb {
+ struct qdisc_skb_cb qdisc_cb;
+ u8 hwaddr[INFINIBAND_ALEN];
};
/* Used for all multicast joins (broadcast, IPv4 mcast and IPv6 mcast) */
}
static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev,
- struct ipoib_pseudoheader *phdr)
+ struct ipoib_cb *cb)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_path *path;
spin_lock_irqsave(&priv->lock, flags);
- path = __path_find(dev, phdr->hwaddr + 4);
+ path = __path_find(dev, cb->hwaddr + 4);
if (!path || !path->valid) {
int new_path = 0;
if (!path) {
- path = path_rec_create(dev, phdr->hwaddr + 4);
+ path = path_rec_create(dev, cb->hwaddr + 4);
new_path = 1;
}
if (path) {
- /* put pseudoheader back on for next time */
- skb_push(skb, sizeof *phdr);
__skb_queue_tail(&path->queue, skb);
if (!path->query && path_rec_start(dev, path)) {
be16_to_cpu(path->pathrec.dlid));
spin_unlock_irqrestore(&priv->lock, flags);
- ipoib_send(dev, skb, path->ah, IPOIB_QPN(phdr->hwaddr));
+ ipoib_send(dev, skb, path->ah, IPOIB_QPN(cb->hwaddr));
return;
} else if ((path->query || !path_rec_start(dev, path)) &&
skb_queue_len(&path->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
- /* put pseudoheader back on for next time */
- skb_push(skb, sizeof *phdr);
__skb_queue_tail(&path->queue, skb);
} else {
++dev->stats.tx_dropped;
dev_kfree_skb_any(skb);
}
} else {
- struct ipoib_pseudoheader *phdr =
- (struct ipoib_pseudoheader *) skb->data;
- skb_pull(skb, sizeof *phdr);
+ struct ipoib_cb *cb = (struct ipoib_cb *) skb->cb;
- if (phdr->hwaddr[4] == 0xff) {
+ if (cb->hwaddr[4] == 0xff) {
/* Add in the P_Key for multicast*/
- phdr->hwaddr[8] = (priv->pkey >> 8) & 0xff;
- phdr->hwaddr[9] = priv->pkey & 0xff;
+ cb->hwaddr[8] = (priv->pkey >> 8) & 0xff;
+ cb->hwaddr[9] = priv->pkey & 0xff;
- ipoib_mcast_send(dev, phdr->hwaddr + 4, skb);
+ ipoib_mcast_send(dev, cb->hwaddr + 4, skb);
} else {
/* unicast GID -- should be ARP or RARP reply */
ipoib_warn(priv, "Unicast, no %s: type %04x, QPN %06x %pI6\n",
skb_dst(skb) ? "neigh" : "dst",
be16_to_cpup((__be16 *) skb->data),
- IPOIB_QPN(phdr->hwaddr),
- phdr->hwaddr + 4);
+ IPOIB_QPN(cb->hwaddr),
+ cb->hwaddr + 4);
dev_kfree_skb_any(skb);
++dev->stats.tx_dropped;
goto unlock;
}
- unicast_arp_send(skb, dev, phdr);
+ unicast_arp_send(skb, dev, cb);
}
}
unlock:
const void *daddr, const void *saddr, unsigned len)
{
struct ipoib_header *header;
- struct dst_entry *dst;
- struct neighbour *n;
header = (struct ipoib_header *) skb_push(skb, sizeof *header);
header->reserved = 0;
/*
- * If we don't have a neighbour structure, stuff the
- * destination address onto the front of the skb so we can
- * figure out where to send the packet later.
+ * If we don't have a dst_entry structure, stuff the
+ * destination address into skb->cb so we can figure out where
+ * to send the packet later.
*/
- dst = skb_dst(skb);
- n = NULL;
- if (dst)
- n = dst_get_neighbour_noref_raw(dst);
- if ((!dst || !n) && daddr) {
- struct ipoib_pseudoheader *phdr =
- (struct ipoib_pseudoheader *) skb_push(skb, sizeof *phdr);
- memcpy(phdr->hwaddr, daddr, INFINIBAND_ALEN);
+ if (!skb_dst(skb)) {
+ struct ipoib_cb *cb = (struct ipoib_cb *) skb->cb;
+ memcpy(cb->hwaddr, daddr, INFINIBAND_ALEN);
}
return 0;
dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
- /*
- * We add in INFINIBAND_ALEN to allow for the destination
- * address "pseudoheader" for skbs without neighbour struct.
- */
- dev->hard_header_len = IPOIB_ENCAP_LEN + INFINIBAND_ALEN;
+ dev->hard_header_len = IPOIB_ENCAP_LEN;
dev->addr_len = INFINIBAND_ALEN;
dev->type = ARPHRD_INFINIBAND;
dev->tx_queue_len = ipoib_sendq_size * 2;
netif_tx_lock_bh(dev);
while (!skb_queue_empty(&mcast->pkt_queue)) {
struct sk_buff *skb = skb_dequeue(&mcast->pkt_queue);
- struct dst_entry *dst = skb_dst(skb);
- struct neighbour *n = NULL;
netif_tx_unlock_bh(dev);
skb->dev = dev;
- if (dst)
- n = dst_get_neighbour_noref_raw(dst);
- if (!dst || !n) {
- /* put pseudoheader back on for next time */
- skb_push(skb, sizeof (struct ipoib_pseudoheader));
- }
-
if (dev_queue_xmit(skb))
ipoib_warn(priv, "dev_queue_xmit failed to requeue packet\n");
+
netif_tx_lock_bh(dev);
}
netif_tx_unlock_bh(dev);
*/
static u64 srpt_service_guid;
-static spinlock_t srpt_dev_lock; /* Protects srpt_dev_list. */
-static struct list_head srpt_dev_list; /* List of srpt_device structures. */
+static DEFINE_SPINLOCK(srpt_dev_lock); /* Protects srpt_dev_list. */
+static LIST_HEAD(srpt_dev_list); /* List of srpt_device structures. */
static unsigned srp_max_req_size = DEFAULT_MAX_REQ_SIZE;
module_param(srp_max_req_size, int, 0444);
while (--i >= 0)
srpt_free_ioctx(sdev, ring[i], dma_size, dir);
kfree(ring);
+ ring = NULL;
out:
return ring;
}
}
ch->sess = transport_init_session();
- if (!ch->sess) {
+ if (IS_ERR(ch->sess)) {
rej->reason = __constant_cpu_to_be32(
SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES);
pr_debug("Failed to create session\n");
for (i = 0; i < sdev->srq_size; ++i)
srpt_post_recv(sdev, sdev->ioctx_ring[i]);
- WARN_ON(sdev->device->phys_port_cnt
- > sizeof(sdev->port)/sizeof(sdev->port[0]));
+ WARN_ON(sdev->device->phys_port_cnt > ARRAY_SIZE(sdev->port));
for (i = 1; i <= sdev->device->phys_port_cnt; i++) {
sport = &sdev->port[i - 1];
goto out;
}
- spin_lock_init(&srpt_dev_lock);
- INIT_LIST_HEAD(&srpt_dev_list);
-
- ret = -ENODEV;
srpt_target = target_fabric_configfs_init(THIS_MODULE, "srpt");
- if (!srpt_target) {
+ if (IS_ERR(srpt_target)) {
printk(KERN_ERR "couldn't register\n");
+ ret = PTR_ERR(srpt_target);
goto out;
}
#ifndef IB_SRPT_H
#define IB_SRPT_H
-#include <linux/version.h>
#include <linux/types.h>
#include <linux/list.h>
#include <linux/wait.h>
struct evdev_client *client = file->private_data;
struct evdev *evdev = client->evdev;
struct input_event event;
- int retval;
+ int retval = 0;
if (count < input_event_size())
return -EINVAL;
#include <linux/i2c/twl.h>
#include <linux/slab.h>
-
/*
* The TWL4030 family chips include a keypad controller that supports
* up to an 8x8 switch matrix. The controller can issue system wakeup
if (twl4030_kpwrite_u8(kp, i, KEYP_DEB) < 0)
return -EIO;
- /* Set timeout period to 100 ms */
+ /* Set timeout period to 200 ms */
i = KEYP_PERIOD_US(200000, PTV_PRESCALER);
if (twl4030_kpwrite_u8(kp, (i & 0xFF), KEYP_TIMEOUT_L) < 0)
return -EIO;
MODULE_DESCRIPTION("TWL4030 Keypad Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:twl4030_keypad");
-
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1720"),
},
},
+ {
+ /* Lenovo Ideapad U455 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "20046"),
+ },
+ },
{ }
};
struct serio_raw_client *client = file->private_data;
struct serio_raw *serio_raw = client->serio_raw;
char uninitialized_var(c);
- ssize_t retval = 0;
+ ssize_t read = 0;
+ int retval;
if (serio_raw->dead)
return -ENODEV;
if (serio_raw->dead)
return -ENODEV;
- while (retval < count && serio_raw_fetch_byte(serio_raw, &c)) {
- if (put_user(c, buffer++))
- return -EFAULT;
- retval++;
+ while (read < count && serio_raw_fetch_byte(serio_raw, &c)) {
+ if (put_user(c, buffer++)) {
+ retval = -EFAULT;
+ break;
+ }
+ read++;
}
- return retval;
+ return read ?: retval;
}
static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
for_each_pci_dev(pdev) {
if (!check_device(&pdev->dev)) {
+
+ iommu_ignore_device(&pdev->dev);
+
unhandled += 1;
continue;
}
priv = domain->priv;
- if (!priv) {
- ret = -ENODEV;
+ if (!priv)
goto fail;
- }
fl_table = priv->pgtable;
if (len != SZ_16M && len != SZ_1M &&
len != SZ_64K && len != SZ_4K) {
pr_debug("Bad length: %d\n", len);
- ret = -EINVAL;
goto fail;
}
if (!fl_table) {
pr_debug("Null page table\n");
- ret = -EINVAL;
goto fail;
}
if (*fl_pte == 0) {
pr_debug("First level PTE is 0\n");
- ret = -ENODEV;
goto fail;
}
static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
+ struct omap_iommu *obj = dev_to_omap_iommu(dev);
char *p, *buf;
ssize_t bytes;
static ssize_t debug_read_tlb(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
+ struct omap_iommu *obj = dev_to_omap_iommu(dev);
char *p, *buf;
ssize_t bytes, rest;
struct iotlb_entry e;
struct cr_regs cr;
int err;
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
+ struct omap_iommu *obj = dev_to_omap_iommu(dev);
char buf[MAXCOLUMN], *p = buf;
count = min(count, sizeof(buf));
static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
+ struct omap_iommu *obj = dev_to_omap_iommu(dev);
char *p, *buf;
size_t bytes;
static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
+ struct omap_iommu *obj = dev_to_omap_iommu(dev);
char *p, *buf;
struct iovm_struct *tmp;
int uninitialized_var(i);
static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
char *p, *buf;
struct iovm_struct *area;
ssize_t bytes;
mutex_lock(&iommu_debug_lock);
- area = omap_find_iovm_area(obj, (u32)ppos);
- if (IS_ERR(area)) {
+ area = omap_find_iovm_area(dev, (u32)ppos);
+ if (!area) {
bytes = -EINVAL;
goto err_out;
}
static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
size_t count, loff_t *ppos)
{
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
struct iovm_struct *area;
char *p, *buf;
goto err_out;
}
- area = omap_find_iovm_area(obj, (u32)ppos);
- if (IS_ERR(area)) {
+ area = omap_find_iovm_area(dev, (u32)ppos);
+ if (!area) {
count = -EINVAL;
goto err_out;
}
{ \
struct dentry *dent; \
dent = debugfs_create_file(#attr, mode, parent, \
- obj, &debug_##attr##_fops); \
+ dev, &debug_##attr##_fops); \
if (!dent) \
return -ENOMEM; \
}
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_iommu *obj = platform_get_drvdata(pdev);
+ struct omap_iommu_arch_data *arch_data;
struct dentry *d, *parent;
if (!obj || !obj->dev)
return -EINVAL;
+ arch_data = kzalloc(sizeof(*arch_data), GFP_KERNEL);
+ if (!arch_data)
+ return -ENOMEM;
+
+ arch_data->iommu_dev = obj;
+
+ dev->archdata.iommu = arch_data;
+
d = debugfs_create_dir(obj->name, iommu_debug_root);
if (!d)
- return -ENOMEM;
+ goto nomem;
parent = d;
d = debugfs_create_u8("nr_tlb_entries", 400, parent,
(u8 *)&obj->nr_tlb_entries);
if (!d)
- return -ENOMEM;
+ goto nomem;
DEBUG_ADD_FILE_RO(ver);
DEBUG_ADD_FILE_RO(regs);
DEBUG_ADD_FILE_RO(mmap);
DEBUG_ADD_FILE(mem);
+ return 0;
+
+nomem:
+ kfree(arch_data);
+ return -ENOMEM;
+}
+
+static int iommu_debug_unregister(struct device *dev, void *data)
+{
+ if (!dev->archdata.iommu)
+ return 0;
+
+ kfree(dev->archdata.iommu);
+
+ dev->archdata.iommu = NULL;
+
return 0;
}
static void __exit iommu_debugfs_exit(void)
{
debugfs_remove_recursive(iommu_debug_root);
+ omap_foreach_iommu_device(NULL, iommu_debug_unregister);
}
module_exit(iommu_debugfs_exit)
return platform_driver_register(&omap_iommu_driver);
}
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
static void __exit omap_iommu_exit(void)
{
{
isdn_net_local *lp = netdev_priv(dev);
unsigned char *p;
- ushort len = 0;
+ int len = 0;
switch (lp->p_encap) {
case ISDN_NET_ENCAP_ETHER:
if (drvdata->mode == LM3530_BL_MODE_ALS) {
if (pltfm->als_vmax == 0) {
- pltfm->als_vmin = als_vmin = 0;
- pltfm->als_vmin = als_vmax = LM3530_ALS_WINDOW_mV;
+ pltfm->als_vmin = 0;
+ pltfm->als_vmax = LM3530_ALS_WINDOW_mV;
}
als_vmin = pltfm->als_vmin;
req = NULL;
spin_lock_irqsave(&state->lock, flags);
add_wait_queue(&state->wait_queue, &wait);
- current->state = TASK_INTERRUPTIBLE;
+ set_current_state(TASK_INTERRUPTIBLE);
for (;;) {
req = state->completed;
spin_lock_irqsave(&state->lock, flags);
}
- current->state = TASK_RUNNING;
+ set_current_state(TASK_RUNNING);
remove_wait_queue(&state->wait_queue, &wait);
spin_unlock_irqrestore(&state->lock, flags);
struct raid_set {
struct dm_target *ti;
- uint64_t print_flags;
+ uint32_t bitmap_loaded;
+ uint32_t print_flags;
struct mddev md;
struct raid_type *raid_type;
raid_param_cnt += 2;
}
- raid_param_cnt += (hweight64(rs->print_flags & ~DMPF_REBUILD) * 2);
+ raid_param_cnt += (hweight32(rs->print_flags & ~DMPF_REBUILD) * 2);
if (rs->print_flags & (DMPF_SYNC | DMPF_NOSYNC))
raid_param_cnt--;
{
struct raid_set *rs = ti->private;
- bitmap_load(&rs->md);
+ if (!rs->bitmap_loaded) {
+ bitmap_load(&rs->md);
+ rs->bitmap_loaded = 1;
+ } else
+ md_wakeup_thread(rs->md.thread);
+
mddev_resume(&rs->md);
}
printk(KERN_INFO
"md: checkpointing %s of %s.\n",
desc, mdname(mddev));
- mddev->recovery_cp = mddev->curr_resync;
+ mddev->recovery_cp =
+ mddev->curr_resync_completed;
}
} else
mddev->recovery_cp = MaxSector;
rcu_read_unlock();
}
}
+ skip:
set_bit(MD_CHANGE_DEVS, &mddev->flags);
- skip:
if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
/* We completed so min/max setting can be forgotten if used. */
if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
menu "Texas Instruments WL128x FM driver (ST based)"
config RADIO_WL128X
tristate "Texas Instruments WL128x FM Radio"
- depends on VIDEO_V4L2 && RFKILL
- select TI_ST if NET && GPIOLIB
+ depends on VIDEO_V4L2 && RFKILL && GPIOLIB
+ select TI_ST if NET
help
Choose Y here if you have this FM radio chip.
#define MOD_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display"
#define MOD_NAME "imon"
-#define MOD_VERSION "0.9.3"
+#define MOD_VERSION "0.9.4"
#define DISPLAY_MINOR_BASE 144
#define DEVICE_NAME "lcd%d"
return;
ictx = (struct imon_context *)urb->context;
- if (!ictx || !ictx->dev_present_intf0)
+ if (!ictx)
return;
+ /*
+ * if we get a callback before we're done configuring the hardware, we
+ * can't yet process the data, as there's nowhere to send it, but we
+ * still need to submit a new rx URB to avoid wedging the hardware
+ */
+ if (!ictx->dev_present_intf0)
+ goto out;
+
switch (urb->status) {
case -ENOENT: /* usbcore unlink successful! */
return;
break;
}
+out:
usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
}
return;
ictx = (struct imon_context *)urb->context;
- if (!ictx || !ictx->dev_present_intf1)
+ if (!ictx)
return;
+ /*
+ * if we get a callback before we're done configuring the hardware, we
+ * can't yet process the data, as there's nowhere to send it, but we
+ * still need to submit a new rx URB to avoid wedging the hardware
+ */
+ if (!ictx->dev_present_intf1)
+ goto out;
+
switch (urb->status) {
case -ENOENT: /* usbcore unlink successful! */
return;
break;
}
+out:
usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
}
mutex_unlock(&ictx->lock);
usb_free_urb(rx_urb);
rx_urb_alloc_failed:
- dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret);
+ dev_err(ictx->dev, "unable to initialize intf1, err %d\n", ret);
return NULL;
}
}
#endif
+ dev->fw_ver = dev->usbc_buf[1];
+
v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n",
- dev->usbc_buf[1], &dev->usbc_buf[2]);
+ dev->fw_ver, &dev->usbc_buf[2]);
+
+ if (dev->fw_ver > 0x15) {
+ dev->options.brightness = 0x80;
+ dev->options.contrast = 0x40;
+ dev->options.hue = 0xf;
+ dev->options.saturation = 0x40;
+ dev->options.sharpness = 0x80;
+ }
- switch (dev->usbc_buf[1]) {
+ switch (dev->fw_ver) {
case HDPVR_FIRMWARE_VERSION:
dev->flags &= ~HDPVR_FLAG_AC3_CAP;
break;
default:
v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might"
" not work.\n");
- if (dev->usbc_buf[1] >= HDPVR_FIRMWARE_VERSION_AC3)
+ if (dev->fw_ver >= HDPVR_FIRMWARE_VERSION_AC3)
dev->flags |= HDPVR_FLAG_AC3_CAP;
else
dev->flags &= ~HDPVR_FLAG_AC3_CAP;
.bitrate_mode = HDPVR_CONSTANT,
.gop_mode = HDPVR_SIMPLE_IDR_GOP,
.audio_codec = V4L2_MPEG_AUDIO_ENCODING_AAC,
+ /* original picture controls for firmware version <= 0x15 */
+ /* updated in device_authorization() for newer firmware */
.brightness = 0x86,
.contrast = 0x80,
.hue = 0x80,
hdpvr_config_call(dev, CTRL_START_STREAMING_VALUE, 0x00);
+ dev->status = STATUS_STREAMING;
+
INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
queue_work(dev->workqueue, &dev->worker);
v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
"streaming started\n");
- dev->status = STATUS_STREAMING;
return 0;
}
};
static int fill_queryctrl(struct hdpvr_options *opt, struct v4l2_queryctrl *qc,
- int ac3)
+ int ac3, int fw_ver)
{
int err;
+ if (fw_ver > 0x15) {
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ case V4L2_CID_CONTRAST:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40);
+ case V4L2_CID_SATURATION:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40);
+ case V4L2_CID_HUE:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0x1e, 1, 0xf);
+ case V4L2_CID_SHARPNESS:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ }
+ } else {
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86);
+ case V4L2_CID_CONTRAST:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ case V4L2_CID_SATURATION:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ case V4L2_CID_HUE:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ case V4L2_CID_SHARPNESS:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ }
+ }
+
switch (qc->id) {
- case V4L2_CID_BRIGHTNESS:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86);
- case V4L2_CID_CONTRAST:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
- case V4L2_CID_SATURATION:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
- case V4L2_CID_HUE:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
- case V4L2_CID_SHARPNESS:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
case V4L2_CID_MPEG_AUDIO_ENCODING:
return v4l2_ctrl_query_fill(
qc, V4L2_MPEG_AUDIO_ENCODING_AAC,
if (qc->id == supported_v4l2_ctrls[i])
return fill_queryctrl(&dev->options, qc,
- dev->flags & HDPVR_FLAG_AC3_CAP);
+ dev->flags & HDPVR_FLAG_AC3_CAP,
+ dev->fw_ver);
if (qc->id < supported_v4l2_ctrls[i])
break;
/* usb control transfer buffer and lock */
struct mutex usbc_mutex;
u8 *usbc_buf;
+ u8 fw_ver;
};
static inline struct hdpvr_device *to_hdpvr_dev(struct v4l2_device *v4l2_dev)
static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
{
struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
- struct video_device *vdev = &ccdc->subdev.devnode;
+ struct video_device *vdev = ccdc->subdev.devnode;
struct v4l2_event event;
memset(&event, 0, sizeof(event));
config TWL4030_CORE
bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
- depends on I2C=y && GENERIC_HARDIRQS && IRQ_DOMAIN
+ depends on I2C=y && GENERIC_HARDIRQS
help
Say yes here if you have TWL4030 / TWL6030 family chip on your board.
This core driver provides register access and IRQ handling
return ret;
out_freeirq:
- if (ab8500->irq_base) {
+ if (ab8500->irq_base)
free_irq(ab8500->irq, ab8500);
out_removeirq:
+ if (ab8500->irq_base)
ab8500_irq_remove(ab8500);
- }
+
return ret;
}
}
if (!cell->ignore_resource_conflicts) {
- ret = acpi_check_resource_conflict(res);
+ ret = acpi_check_resource_conflict(&res[r]);
if (ret)
goto fail_res;
}
s5m87xx->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
i2c_set_clientdata(s5m87xx->rtc, s5m87xx);
- if (pdata->cfg_pmic_irq)
+ if (pdata && pdata->cfg_pmic_irq)
pdata->cfg_pmic_irq();
s5m_irq_init(s5m87xx);
goto err;
init_data->irq = pmic_plat_data->irq;
- init_data->irq_base = pmic_plat_data->irq;
+ init_data->irq_base = pmic_plat_data->irq_base;
tps65910_gpio_init(tps65910, pmic_plat_data->gpio_base);
goto err;
init_data->irq = pmic_plat_data->irq;
- init_data->irq_base = pmic_plat_data->irq;
+ init_data->irq_base = pmic_plat_data->irq_base;
ret = tps65912_irq_init(tps65912, init_data->irq, init_data);
if (ret < 0)
goto err;
static struct twl_client twl_modules[TWL_NUM_SLAVES];
+#ifdef CONFIG_IRQ_DOMAIN
static struct irq_domain domain;
+#endif
/* mapping the module id to slave id and base address */
struct twl_mapping {
pdata->irq_base = status;
pdata->irq_end = pdata->irq_base + nr_irqs;
+#ifdef CONFIG_IRQ_DOMAIN
domain.irq_base = pdata->irq_base;
domain.nr_irq = nr_irqs;
-#ifdef CONFIG_OF_IRQ
domain.of_node = of_node_get(node);
domain.ops = &irq_domain_simple_ops;
-#endif
irq_domain_add(&domain);
+#endif
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
dev_dbg(&client->dev, "can't talk I2C?\n");
[RES_MAIN_REF] = 0x94,
};
-static int __init twl4030_write_script_byte(u8 address, u8 byte)
+static int __devinit twl4030_write_script_byte(u8 address, u8 byte)
{
int err;
return err;
}
-static int __init twl4030_write_script_ins(u8 address, u16 pmb_message,
+static int __devinit twl4030_write_script_ins(u8 address, u16 pmb_message,
u8 delay, u8 next)
{
int err;
return err;
}
-static int __init twl4030_write_script(u8 address, struct twl4030_ins *script,
+static int __devinit twl4030_write_script(u8 address, struct twl4030_ins *script,
int len)
{
int err;
return err;
}
-static int __init twl4030_config_wakeup3_sequence(u8 address)
+static int __devinit twl4030_config_wakeup3_sequence(u8 address)
{
int err;
u8 data;
return err;
}
-static int __init twl4030_config_wakeup12_sequence(u8 address)
+static int __devinit twl4030_config_wakeup12_sequence(u8 address)
{
int err = 0;
u8 data;
return err;
}
-static int __init twl4030_config_sleep_sequence(u8 address)
+static int __devinit twl4030_config_sleep_sequence(u8 address)
{
int err;
return err;
}
-static int __init twl4030_config_warmreset_sequence(u8 address)
+static int __devinit twl4030_config_warmreset_sequence(u8 address)
{
int err;
u8 rd_data;
return err;
}
-static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
+static int __devinit twl4030_configure_resource(struct twl4030_resconfig *rconfig)
{
int rconfig_addr;
int err;
return 0;
}
-static int __init load_twl4030_script(struct twl4030_script *tscript,
+static int __devinit load_twl4030_script(struct twl4030_script *tscript,
u8 address)
{
int err;
pr_err("TWL4030 Unable to power off\n");
}
-void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
+void __devinit twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
{
int err = 0;
int i;
/* Default PLL configuration after power up */
twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
twl6040->sysclk = 19200000;
+ twl6040->mclk = 32768;
} else {
/* already powered-down */
if (!twl6040->power_count) {
twl6040_power_down(twl6040);
}
twl6040->sysclk = 0;
+ twl6040->mclk = 0;
}
out:
hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
+ /* Force full reconfiguration when switching between PLL */
+ if (pll_id != twl6040->pll) {
+ twl6040->sysclk = 0;
+ twl6040->mclk = 0;
+ }
+
switch (pll_id) {
case TWL6040_SYSCLK_SEL_LPPLL:
/* low-power PLL divider */
- switch (freq_out) {
- case 17640000:
- lppllctl |= TWL6040_LPLLFIN;
- break;
- case 19200000:
- lppllctl &= ~TWL6040_LPLLFIN;
- break;
- default:
- dev_err(twl6040->dev,
- "freq_out %d not supported\n", freq_out);
- ret = -EINVAL;
- goto pll_out;
+ /* Change the sysclk configuration only if it has been canged */
+ if (twl6040->sysclk != freq_out) {
+ switch (freq_out) {
+ case 17640000:
+ lppllctl |= TWL6040_LPLLFIN;
+ break;
+ case 19200000:
+ lppllctl &= ~TWL6040_LPLLFIN;
+ break;
+ default:
+ dev_err(twl6040->dev,
+ "freq_out %d not supported\n",
+ freq_out);
+ ret = -EINVAL;
+ goto pll_out;
+ }
+ twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+ lppllctl);
}
- twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
+
+ /* The PLL in use has not been change, we can exit */
+ if (twl6040->pll == pll_id)
+ break;
switch (freq_in) {
case 32768:
goto pll_out;
}
- hppllctl &= ~TWL6040_MCLK_MSK;
+ if (twl6040->mclk != freq_in) {
+ hppllctl &= ~TWL6040_MCLK_MSK;
+
+ switch (freq_in) {
+ case 12000000:
+ /* PLL enabled, active mode */
+ hppllctl |= TWL6040_MCLK_12000KHZ |
+ TWL6040_HPLLENA;
+ break;
+ case 19200000:
+ /*
+ * PLL disabled
+ * (enable PLL if MCLK jitter quality
+ * doesn't meet specification)
+ */
+ hppllctl |= TWL6040_MCLK_19200KHZ;
+ break;
+ case 26000000:
+ /* PLL enabled, active mode */
+ hppllctl |= TWL6040_MCLK_26000KHZ |
+ TWL6040_HPLLENA;
+ break;
+ case 38400000:
+ /* PLL enabled, active mode */
+ hppllctl |= TWL6040_MCLK_38400KHZ |
+ TWL6040_HPLLENA;
+ break;
+ default:
+ dev_err(twl6040->dev,
+ "freq_in %d not supported\n", freq_in);
+ ret = -EINVAL;
+ goto pll_out;
+ }
- switch (freq_in) {
- case 12000000:
- /* PLL enabled, active mode */
- hppllctl |= TWL6040_MCLK_12000KHZ |
- TWL6040_HPLLENA;
- break;
- case 19200000:
/*
- * PLL disabled
- * (enable PLL if MCLK jitter quality
- * doesn't meet specification)
+ * enable clock slicer to ensure input waveform is
+ * square
*/
- hppllctl |= TWL6040_MCLK_19200KHZ;
- break;
- case 26000000:
- /* PLL enabled, active mode */
- hppllctl |= TWL6040_MCLK_26000KHZ |
- TWL6040_HPLLENA;
- break;
- case 38400000:
- /* PLL enabled, active mode */
- hppllctl |= TWL6040_MCLK_38400KHZ |
- TWL6040_HPLLENA;
- break;
- default:
- dev_err(twl6040->dev,
- "freq_in %d not supported\n", freq_in);
- ret = -EINVAL;
- goto pll_out;
- }
+ hppllctl |= TWL6040_HPLLSQRENA;
- /* enable clock slicer to ensure input waveform is square */
- hppllctl |= TWL6040_HPLLSQRENA;
-
- twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, hppllctl);
- usleep_range(500, 700);
- lppllctl |= TWL6040_HPLLSEL;
- twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
- lppllctl &= ~TWL6040_LPLLENA;
- twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
+ twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
+ hppllctl);
+ usleep_range(500, 700);
+ lppllctl |= TWL6040_HPLLSEL;
+ twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+ lppllctl);
+ lppllctl &= ~TWL6040_LPLLENA;
+ twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+ lppllctl);
+ }
break;
default:
dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
}
twl6040->sysclk = freq_out;
+ twl6040->mclk = freq_in;
twl6040->pll = pll_id;
pll_out:
mutex_init(&wm8350->irq_lock);
wm8350->chip_irq = irq;
- wm8350->irq_base = pdata->irq_base;
if (pdata && pdata->irq_base > 0)
irq_base = pdata->irq_base;
break;
}
+ switch (wm8994->type) {
+ case WM1811:
+ ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read jackdet: %d\n", ret);
+ } else if (ret & WM1811_JACKDET_MODE_MASK) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+ break;
+ default:
+ break;
+ }
+
/* Disable LDO pulldowns while the device is suspended if we
* don't know that something will be driving them. */
if (!wm8994->ldo_ena_always_driven)
case WM8994_DC_SERVO_2:
case WM8994_DC_SERVO_READBACK:
case WM8994_DC_SERVO_4:
+ case WM8994_DC_SERVO_4E:
case WM8994_ANALOGUE_HP_1:
case WM8958_MIC_DETECT_1:
case WM8958_MIC_DETECT_2:
# Misc strange devices
#
-# This one has to live outside of the MISC_DEVICES conditional,
-# because it may be selected by drivers/platform/x86/hp_accel.
+menu "Misc devices"
+
config SENSORS_LIS3LV02D
tristate
depends on INPUT
select INPUT_POLLDEV
default n
-menuconfig MISC_DEVICES
- bool "Misc devices"
- ---help---
- Say Y here to get to see options for device drivers from various
- different categories. This option alone does not add any kernel code.
-
- If you say N, all options in this submenu will be skipped and disabled.
-
-if MISC_DEVICES
-
config AD525X_DPOT
tristate "Analog Devices Digital Potentiometers"
depends on (I2C || SPI) && SYSFS
source "drivers/misc/lis3lv02d/Kconfig"
source "drivers/misc/carma/Kconfig"
source "drivers/misc/altera-stapl/Kconfig"
-
-endif # MISC_DEVICES
+endmenu
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/ioport.h>
#include <linux/c2port.h>
#define DATA_PORT 0x325
if (err)
return err;
+ spin_lock_init(&chip->irq_lock);
chip->pdev = pdev;
chip->iobase = pcim_iomap_table(pdev)[0];
* In other cases (such as with VSAless OpenFirmware), the system firmware
* leaves timers available for us to use.
*/
-static int __init scan_timers(struct cs5535_mfgpt_chip *mfgpt)
+static int __devinit scan_timers(struct cs5535_mfgpt_chip *mfgpt)
{
struct cs5535_mfgpt_timer timer = { .chip = mfgpt };
unsigned long flags;
static void lkdtm_handler(void)
{
unsigned long flags;
+ bool do_it = false;
spin_lock_irqsave(&count_lock, flags);
count--;
cp_name_to_str(cpoint), cp_type_to_str(cptype), count);
if (count == 0) {
- lkdtm_do_action(cptype);
+ do_it = true;
count = cpoint_count;
}
spin_unlock_irqrestore(&count_lock, flags);
+
+ if (do_it)
+ lkdtm_do_action(cptype);
}
static int lkdtm_register_cpoint(enum cname which)
* fear that guest will need it. Host may reject some pages, we need to
* check the return value and maybe submit a different page.
*/
-static bool vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn,
+static int vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn,
unsigned int *hv_status)
{
unsigned long status, dummy;
pfn32 = (u32)pfn;
if (pfn32 != pfn)
- return false;
+ return -1;
STATS_INC(b->stats.lock);
*hv_status = status = VMWARE_BALLOON_CMD(LOCK, pfn, dummy);
if (vmballoon_check_status(b, status))
- return true;
+ return 0;
pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status);
STATS_INC(b->stats.lock_fail);
- return false;
+ return 1;
}
/*
struct page *page;
gfp_t flags;
unsigned int hv_status;
- bool locked = false;
+ int locked;
flags = can_sleep ? VMW_PAGE_ALLOC_CANSLEEP : VMW_PAGE_ALLOC_NOSLEEP;
do {
/* inform monitor */
locked = vmballoon_send_lock_page(b, page_to_pfn(page), &hv_status);
- if (!locked) {
+ if (locked > 0) {
STATS_INC(b->stats.refused_alloc);
if (hv_status == VMW_BALLOON_ERROR_RESET ||
if (++b->n_refused_pages >= VMW_BALLOON_MAX_REFUSED)
return -EIO;
}
- } while (!locked);
+ } while (locked != 0);
/* track allocated page */
list_add(&page->lru, &b->pages);
md->power_ro_lock.show = power_ro_lock_show;
md->power_ro_lock.store = power_ro_lock_store;
+ sysfs_attr_init(&md->power_ro_lock.attr);
md->power_ro_lock.attr.mode = mode;
md->power_ro_lock.attr.name =
"ro_lock_until_next_power_on";
static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
bool is_first_req)
{
- if (host->ops->pre_req)
+ if (host->ops->pre_req) {
+ mmc_host_clk_hold(host);
host->ops->pre_req(host, mrq, is_first_req);
+ mmc_host_clk_release(host);
+ }
}
/**
static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
int err)
{
- if (host->ops->post_req)
+ if (host->ops->post_req) {
+ mmc_host_clk_hold(host);
host->ops->post_req(host, mrq, err);
+ mmc_host_clk_release(host);
+ }
}
/**
int err;
host->en_dis_recurs = 1;
+ mmc_host_clk_hold(host);
err = host->ops->enable(host);
+ mmc_host_clk_release(host);
host->en_dis_recurs = 0;
if (err) {
int err;
host->en_dis_recurs = 1;
+ mmc_host_clk_hold(host);
err = host->ops->disable(host, lazy);
+ mmc_host_clk_release(host);
host->en_dis_recurs = 0;
if (err < 0) {
* might not allow this operation
*/
voltage = regulator_get_voltage(supply);
+
+ if (mmc->caps2 & MMC_CAP2_BROKEN_VOLTAGE)
+ min_uV = max_uV = voltage;
+
if (voltage < 0)
result = voltage;
else if (voltage < min_uV || voltage > max_uV)
host->ios.signal_voltage = signal_voltage;
- if (host->ops->start_signal_voltage_switch)
+ if (host->ops->start_signal_voltage_switch) {
+ mmc_host_clk_hold(host);
err = host->ops->start_signal_voltage_switch(host, &host->ios);
+ mmc_host_clk_release(host);
+ }
return err;
}
int err = 0;
card = host->card;
+ mmc_claim_host(host);
/*
* Send power notify command only if card
/* Set the card state to no notification after the poweroff */
card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
}
+ mmc_release_host(host);
}
/*
void mmc_power_off(struct mmc_host *host)
{
+ int err = 0;
mmc_host_clk_hold(host);
host->ios.clock = 0;
host->ios.vdd = 0;
- mmc_poweroff_notify(host);
+ /*
+ * For eMMC 4.5 device send AWAKE command before
+ * POWER_OFF_NOTIFY command, because in sleep state
+ * eMMC 4.5 devices respond to only RESET and AWAKE cmd
+ */
+ if (host->card && mmc_card_is_sleep(host->card) &&
+ host->bus_ops->resume) {
+ err = host->bus_ops->resume(host);
+
+ if (!err)
+ mmc_poweroff_notify(host);
+ else
+ pr_warning("%s: error %d during resume "
+ "(continue with poweroff sequence)\n",
+ mmc_hostname(host), err);
+ }
/*
* Reset ocr mask to be the highest possible voltage supported for
*/
mmc_hw_reset_for_init(host);
+ /* Initialization should be done at 3.3 V I/O voltage. */
+ mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
/*
* sdio_reset sends CMD52 to reset card. Since we do not know
* if the card is being re-initialized, just send it. CMD52
*/
if (mmc_try_claim_host(host)) {
if (host->bus_ops->suspend) {
- /*
- * For eMMC 4.5 device send notify command
- * before sleep, because in sleep state eMMC 4.5
- * devices respond to only RESET and AWAKE cmd
- */
- mmc_poweroff_notify(host);
err = host->bus_ops->suspend(host);
}
mmc_do_release_host(host);
/* Hold MCI clock for 8 cycles by default */
host->clk_delay = 8;
/*
- * Default clock gating delay is 200ms.
+ * Default clock gating delay is 0ms to avoid wasting power.
* This value can be tuned by writing into sysfs entry.
*/
- host->clkgate_delay = 200;
+ host->clkgate_delay = 0;
host->clk_gated = false;
INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work);
spin_lock_init(&host->clk_lock);
int mmc_register_host_class(void);
void mmc_unregister_host_class(void);
-
-#ifdef CONFIG_MMC_CLKGATE
-void mmc_host_clk_hold(struct mmc_host *host);
-void mmc_host_clk_release(struct mmc_host *host);
-unsigned int mmc_host_clk_rate(struct mmc_host *host);
-
-#else
-static inline void mmc_host_clk_hold(struct mmc_host *host)
-{
-}
-
-static inline void mmc_host_clk_release(struct mmc_host *host)
-{
-}
-
-static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
-{
- return host->ios.clock;
-}
-#endif
-
void mmc_host_deeper_disable(struct work_struct *work);
#endif
}
card->ext_csd.raw_hc_erase_gap_size =
- ext_csd[EXT_CSD_PARTITION_ATTRIBUTE];
+ ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
card->ext_csd.raw_sec_trim_mult =
ext_csd[EXT_CSD_SEC_TRIM_MULT];
card->ext_csd.raw_sec_erase_mult =
goto out;
/* only compare read only fields */
- err = (!(card->ext_csd.raw_partition_support ==
+ err = !((card->ext_csd.raw_partition_support ==
bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) &&
(card->ext_csd.raw_erased_mem_count ==
bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) &&
if (!mmc_host_is_spi(host))
mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
+ /* Initialization should be done at 3.3 V I/O voltage. */
+ mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
/*
* Since we're changing the OCR value, we seem to
* need to tell some cards to go back to the idle
err = mmc_select_hs200(card);
else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 1, 0);
+ EXT_CSD_HS_TIMING, 1,
+ card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
* Activate wide bus and DDR (if supported).
*/
if (!mmc_card_hs200(card) &&
- (card->csd.mmca_vsn >= CSD_SPEC_VER_3) &&
+ (card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
static unsigned ext_csd_bits[][2] = {
{ EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },
BUG_ON(!host->card);
mmc_claim_host(host);
- if (mmc_card_can_sleep(host))
+ if (mmc_card_can_sleep(host)) {
err = mmc_card_sleep(host);
- else if (!mmc_host_is_spi(host))
+ if (!err)
+ mmc_card_set_sleep(host->card);
+ } else if (!mmc_host_is_spi(host))
mmc_deselect_cards(host);
- host->card->state &= ~MMC_STATE_HIGHSPEED;
+ host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc_release_host(host);
return err;
BUG_ON(!host->card);
mmc_claim_host(host);
- err = mmc_init_card(host, host->ocr, host->card);
+ if (mmc_card_is_sleep(host->card)) {
+ err = mmc_card_awake(host);
+ mmc_card_clr_sleep(host->card);
+ } else
+ err = mmc_init_card(host, host->ocr, host->card);
mmc_release_host(host);
return err;
{
int ret;
- host->card->state &= ~MMC_STATE_HIGHSPEED;
+ host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
+ mmc_card_clr_sleep(host->card);
mmc_claim_host(host);
ret = mmc_init_card(host, host->ocr, host->card);
mmc_release_host(host);
* information and let the hardware specific code
* return what is possible given the options
*/
+ mmc_host_clk_hold(card->host);
drive_strength = card->host->ops->select_drive_strength(
card->sw_caps.uhs_max_dtr,
host_drv_type, card_drv_type);
+ mmc_host_clk_release(card->host);
err = mmc_sd_switch(card, 1, 2, drive_strength, status);
if (err)
goto out;
/* SPI mode doesn't define CMD19 */
- if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning)
+ if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning) {
+ mmc_host_clk_hold(card->host);
err = card->host->ops->execute_tuning(card->host,
MMC_SEND_TUNING_BLOCK);
+ mmc_host_clk_release(card->host);
+ }
out:
kfree(status);
if (!reinit) {
int ro = -1;
- if (host->ops->get_ro)
+ if (host->ops->get_ro) {
+ mmc_host_clk_hold(card->host);
ro = host->ops->get_ro(host);
+ mmc_host_clk_release(card->host);
+ }
if (ro < 0) {
pr_warning("%s: host does not "
BUG_ON(!host);
WARN_ON(!host->claimed);
+ /* The initialization should be done at 3.3 V I/O voltage. */
+ mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
err = mmc_sd_get_cid(host, ocr, cid, &rocr);
if (err)
return err;
* Since initialization is now complete, enable preset
* value registers for UHS-I cards.
*/
- if (host->ops->enable_preset_value)
+ if (host->ops->enable_preset_value) {
+ mmc_host_clk_hold(card->host);
host->ops->enable_preset_value(host, true);
+ mmc_host_clk_release(card->host);
+ }
} else {
/*
* Attempt to change to high-speed (if supported)
BUG_ON(!host);
WARN_ON(!host->claimed);
- /* Make sure we are at 3.3V signalling voltage */
- err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false);
- if (err)
- return err;
-
/* Disable preset value enable if already set since last time */
- if (host->ops->enable_preset_value)
+ if (host->ops->enable_preset_value) {
+ mmc_host_clk_hold(host);
host->ops->enable_preset_value(host, false);
+ mmc_host_clk_release(host);
+ }
err = mmc_send_app_op_cond(host, 0, &ocr);
if (err)
return ret;
}
-static int sdio_read_cccr(struct mmc_card *card)
+static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
{
int ret;
int cccr_vsn;
+ int uhs = ocr & R4_18V_PRESENT;
unsigned char data;
unsigned char speed;
card->scr.sda_spec3 = 0;
card->sw_caps.sd3_bus_mode = 0;
card->sw_caps.sd3_drv_type = 0;
- if (cccr_vsn >= SDIO_CCCR_REV_3_00) {
+ if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) {
card->scr.sda_spec3 = 1;
ret = mmc_io_rw_direct(card, 0, 0,
SDIO_CCCR_UHS, 0, &data);
* Inform the card of the voltage
*/
if (!powered_resume) {
+ /* The initialization should be done at 3.3 V I/O voltage. */
+ mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
err = mmc_send_io_op_cond(host, host->ocr, &ocr);
if (err)
goto err;
/*
* Read the common registers.
*/
- err = sdio_read_cccr(card);
+ err = sdio_read_cccr(card, ocr);
if (err)
goto remove;
* With these steps taken, mmc_select_voltage() is also required to
* restore the correct voltage setting of the card.
*/
+
+ /* The initialization should be done at 3.3 V I/O voltage. */
+ if (!mmc_card_keep_power(host))
+ mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
sdio_reset(host);
mmc_go_idle(host);
mmc_send_if_cond(host, host->ocr_avail);
}
set_current_state(TASK_INTERRUPTIBLE);
- if (host->caps & MMC_CAP_SDIO_IRQ)
+ if (host->caps & MMC_CAP_SDIO_IRQ) {
+ mmc_host_clk_hold(host);
host->ops->enable_sdio_irq(host, 1);
+ mmc_host_clk_release(host);
+ }
if (!kthread_should_stop())
schedule_timeout(period);
set_current_state(TASK_RUNNING);
} while (!kthread_should_stop());
- if (host->caps & MMC_CAP_SDIO_IRQ)
+ if (host->caps & MMC_CAP_SDIO_IRQ) {
+ mmc_host_clk_hold(host);
host->ops->enable_sdio_irq(host, 0);
+ mmc_host_clk_release(host);
+ }
pr_debug("%s: IRQ thread exiting with code %d\n",
mmc_hostname(host), ret);
config MMC_CB710
tristate "ENE CB710 MMC/SD Interface support"
depends on PCI
- select MISC_DEVICES
select CB710_CORE
help
This option enables support for MMC/SD part of ENE CB710/720 Flash
host->data_status = 0;
if (host->need_reset) {
+ iflags = atmci_readl(host, ATMCI_IMR);
+ iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB);
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
atmci_writel(host, ATMCI_MR, host->mode_reg);
if (host->caps.has_cfg_reg)
atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+ atmci_writel(host, ATMCI_IER, iflags);
host->need_reset = false;
}
atmci_writel(host, ATMCI_SDCR, slot->sdc_reg);
}
}
-static void atmci_configure_dma(struct atmel_mci *host)
+static bool atmci_configure_dma(struct atmel_mci *host)
{
struct mci_platform_data *pdata;
if (host == NULL)
- return;
+ return false;
pdata = host->pdev->dev.platform_data;
host->dma.chan =
dma_request_channel(mask, atmci_filter, pdata->dma_slave);
}
- if (!host->dma.chan)
- dev_notice(&host->pdev->dev, "DMA not available, using PIO\n");
- else
+ if (!host->dma.chan) {
+ dev_warn(&host->pdev->dev, "no DMA channel available\n");
+ return false;
+ } else {
dev_info(&host->pdev->dev,
"Using %s for DMA transfers\n",
dma_chan_name(host->dma.chan));
+ return true;
+ }
}
static inline unsigned int atmci_get_version(struct atmel_mci *host)
/* Get MCI capabilities and set operations according to it */
atmci_get_cap(host);
- if (host->caps.has_dma) {
- dev_info(&pdev->dev, "using DMA\n");
+ if (host->caps.has_dma && atmci_configure_dma(host)) {
host->prepare_data = &atmci_prepare_data_dma;
host->submit_data = &atmci_submit_data_dma;
host->stop_transfer = &atmci_stop_transfer_dma;
host->submit_data = &atmci_submit_data_pdc;
host->stop_transfer = &atmci_stop_transfer_pdc;
} else {
- dev_info(&pdev->dev, "no DMA, no PDC\n");
+ dev_info(&pdev->dev, "using PIO\n");
host->prepare_data = &atmci_prepare_data;
host->submit_data = &atmci_submit_data;
host->stop_transfer = &atmci_stop_transfer;
}
- if (host->caps.has_dma)
- atmci_configure_dma(host);
-
platform_set_drvdata(pdev, host);
/* We need at least one slot to succeed */
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/scatterlist.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/stat.h>
host->dir_status = DW_MCI_SEND_STATUS;
if (dw_mci_submit_data_dma(host, data)) {
+ int flags = SG_MITER_ATOMIC;
+ if (host->data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
host->sg = data->sg;
- host->pio_offset = 0;
host->part_buf_start = 0;
host->part_buf_count = 0;
* generates a block interrupt, hence setting
* the scatter-gather pointer to NULL.
*/
+ sg_miter_stop(&host->sg_miter);
host->sg = NULL;
ctrl = mci_readl(host, CTRL);
ctrl |= SDMMC_CTRL_FIFO_RESET;
static void dw_mci_read_data_pio(struct dw_mci *host)
{
- struct scatterlist *sg = host->sg;
- void *buf = sg_virt(sg);
- unsigned int offset = host->pio_offset;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ void *buf;
+ unsigned int offset;
struct mmc_data *data = host->data;
int shift = host->data_shift;
u32 status;
unsigned int nbytes = 0, len;
+ unsigned int remain, fcnt;
do {
- len = host->part_buf_count +
- (SDMMC_GET_FCNT(mci_readl(host, STATUS)) << shift);
- if (offset + len <= sg->length) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+
+ host->sg = sg_miter->__sg;
+ buf = sg_miter->addr;
+ remain = sg_miter->length;
+ offset = 0;
+
+ do {
+ fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
+ << shift) + host->part_buf_count;
+ len = min(remain, fcnt);
+ if (!len)
+ break;
dw_mci_pull_data(host, (void *)(buf + offset), len);
-
offset += len;
nbytes += len;
-
- if (offset == sg->length) {
- flush_dcache_page(sg_page(sg));
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = 0;
- buf = sg_virt(sg);
- }
- } else {
- unsigned int remaining = sg->length - offset;
- dw_mci_pull_data(host, (void *)(buf + offset),
- remaining);
- nbytes += remaining;
-
- flush_dcache_page(sg_page(sg));
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = len - remaining;
- buf = sg_virt(sg);
- dw_mci_pull_data(host, buf, offset);
- nbytes += offset;
- }
+ remain -= len;
+ } while (remain);
+ sg_miter->consumed = offset;
status = mci_readl(host, MINTSTS);
mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
if (status & DW_MCI_DATA_ERROR_FLAGS) {
host->data_status = status;
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
set_bit(EVENT_DATA_ERROR, &host->pending_events);
return;
}
} while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/
- host->pio_offset = offset;
data->bytes_xfered += nbytes;
+
+ if (!remain) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+ sg_miter->consumed = 0;
+ }
+ sg_miter_stop(sg_miter);
return;
done:
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
static void dw_mci_write_data_pio(struct dw_mci *host)
{
- struct scatterlist *sg = host->sg;
- void *buf = sg_virt(sg);
- unsigned int offset = host->pio_offset;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ void *buf;
+ unsigned int offset;
struct mmc_data *data = host->data;
int shift = host->data_shift;
u32 status;
unsigned int nbytes = 0, len;
+ unsigned int fifo_depth = host->fifo_depth;
+ unsigned int remain, fcnt;
do {
- len = ((host->fifo_depth -
- SDMMC_GET_FCNT(mci_readl(host, STATUS))) << shift)
- - host->part_buf_count;
- if (offset + len <= sg->length) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+
+ host->sg = sg_miter->__sg;
+ buf = sg_miter->addr;
+ remain = sg_miter->length;
+ offset = 0;
+
+ do {
+ fcnt = ((fifo_depth -
+ SDMMC_GET_FCNT(mci_readl(host, STATUS)))
+ << shift) - host->part_buf_count;
+ len = min(remain, fcnt);
+ if (!len)
+ break;
host->push_data(host, (void *)(buf + offset), len);
-
offset += len;
nbytes += len;
- if (offset == sg->length) {
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = 0;
- buf = sg_virt(sg);
- }
- } else {
- unsigned int remaining = sg->length - offset;
-
- host->push_data(host, (void *)(buf + offset),
- remaining);
- nbytes += remaining;
-
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = len - remaining;
- buf = sg_virt(sg);
- host->push_data(host, (void *)buf, offset);
- nbytes += offset;
- }
+ remain -= len;
+ } while (remain);
+ sg_miter->consumed = offset;
status = mci_readl(host, MINTSTS);
mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
if (status & DW_MCI_DATA_ERROR_FLAGS) {
host->data_status = status;
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
return;
}
} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
- host->pio_offset = offset;
data->bytes_xfered += nbytes;
+
+ if (!remain) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+ sg_miter->consumed = 0;
+ }
+ sg_miter_stop(sg_miter);
return;
done:
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
* block interrupt, hence setting the
* scatter-gather pointer to NULL.
*/
+ sg_miter_stop(&host->sg_miter);
host->sg = NULL;
ctrl = mci_readl(host, CTRL);
/*
* Block size can be up to 2048 bytes, but must be a power of two.
*/
- mmc->max_blk_size = 2048;
+ mmc->max_blk_size = 1 << 11;
/*
- * No limit on the number of blocks transferred.
+ * Limit the number of blocks transferred so that we don't overflow
+ * the maximum request size.
*/
- mmc->max_blk_count = mmc->max_req_size;
+ mmc->max_blk_count = mmc->max_req_size >> 11;
spin_lock_init(&host->lock);
const int j = i * 2;
u32 mask;
- mask = mmc_vddrange_to_ocrmask(voltage_ranges[j],
- voltage_ranges[j + 1]);
+ mask = mmc_vddrange_to_ocrmask(be32_to_cpu(voltage_ranges[j]),
+ be32_to_cpu(voltage_ranges[j + 1]));
if (!mask) {
ret = -EINVAL;
dev_err(dev, "OF: voltage-range #%d is invalid\n", i);
imx_data->scratchpad = val;
return;
case SDHCI_COMMAND:
- if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
- && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
+ if ((host->cmd->opcode == MMC_STOP_TRANSMISSION ||
+ host->cmd->opcode == MMC_SET_BLOCK_COUNT) &&
+ (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
val |= SDHCI_CMD_ABORTCMD;
if (is_imx6q_usdhc(imx_data)) {
int base = reg & ~0x3;
int shift = (reg & 0x3) * 8;
u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
+
+ /*
+ * "DMA select" locates at offset 0x28 in SD specification, but on
+ * P5020 or P3041, it locates at 0x29.
+ */
+ if (reg == SDHCI_HOST_CONTROL) {
+ u32 dma_bits;
+
+ dma_bits = in_be32(host->ioaddr + reg);
+ /* DMA select is 22,23 bits in Protocol Control Register */
+ dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
+
+ /* fixup the result */
+ ret &= ~SDHCI_CTRL_DMA_MASK;
+ ret |= dma_bits;
+ }
+
return ret;
}
static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
{
+ /*
+ * "DMA select" location is offset 0x28 in SD specification, but on
+ * P5020 or P3041, it's located at 0x29.
+ */
+ if (reg == SDHCI_HOST_CONTROL) {
+ u32 dma_bits;
+
+ /* DMA select is 22,23 bits in Protocol Control Register */
+ dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
+ clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
+ dma_bits);
+ val &= ~SDHCI_CTRL_DMA_MASK;
+ val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
+ }
+
/* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
if (reg == SDHCI_HOST_CONTROL)
val &= ~ESDHC_HOST_CONTROL_RES;
static int mfd_sdio_probe_slot(struct sdhci_pci_slot *slot)
{
- slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD;
+ slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE;
return 0;
}
* sdhci-pltfm.c Support for SDHCI platform devices
* Copyright (c) 2009 Intel Corporation
*
- * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2007, 2011 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
*
* Authors: Xiaobo Xie <X.Xie@freescale.com>
if (sdhci_of_wp_inverted(np))
host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
+ if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
+ host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+
+ if (of_device_is_compatible(np, "fsl,p2020-esdhc") ||
+ of_device_is_compatible(np, "fsl,p1010-esdhc") ||
+ of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
clk = of_get_property(np, "clock-frequency", &size);
if (clk && size == sizeof(*clk) && *clk)
pltfm_host->clock = be32_to_cpup(clk);
if (ret < 0)
goto clean_up2;
- mmc_add_host(mmc);
+ INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
}
ret = request_threaded_irq(irq[1], sh_mmcif_intr, sh_mmcif_irqt, 0, "sh_mmc:int", host);
if (ret) {
- free_irq(irq[0], host);
dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n");
- goto clean_up3;
+ goto clean_up4;
}
- INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
-
- mmc_detect_change(host->mmc, 0);
+ ret = mmc_add_host(mmc);
+ if (ret < 0)
+ goto clean_up5;
dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION);
dev_dbg(&pdev->dev, "chip ver H'%04x\n",
sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
return ret;
+clean_up5:
+ free_irq(irq[1], host);
+clean_up4:
+ free_irq(irq[0], host);
clean_up3:
- mmc_remove_host(mmc);
pm_runtime_suspend(&pdev->dev);
clean_up2:
pm_runtime_disable(&pdev->dev);
#include <linux/mmc/tmio.h>
#include <linux/mutex.h>
#include <linux/pagemap.h>
-#include <linux/spinlock.h>
#include <linux/scatterlist.h>
+#include <linux/spinlock.h>
/* Definitions for values the CTRL_SDIO_STATUS register can take. */
#define TMIO_SDIO_STAT_IOIRQ 0x0001
void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable);
void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata);
void tmio_mmc_release_dma(struct tmio_mmc_host *host);
+void tmio_mmc_abort_dma(struct tmio_mmc_host *host);
#else
static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host,
struct mmc_data *data)
static inline void tmio_mmc_release_dma(struct tmio_mmc_host *host)
{
}
+
+static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
+{
+}
#endif
#ifdef CONFIG_PM
#endif
}
+void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
+{
+ tmio_mmc_enable_dma(host, false);
+
+ if (host->chan_rx)
+ dmaengine_terminate_all(host->chan_rx);
+ if (host->chan_tx)
+ dmaengine_terminate_all(host->chan_tx);
+
+ tmio_mmc_enable_dma(host, true);
+}
+
static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host)
{
struct scatterlist *sg = host->sg_ptr, *sg_tmp;
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
-#include <linux/workqueue.h>
#include <linux/spinlock.h>
+#include <linux/workqueue.h>
#include "tmio_mmc.h"
/* Ready for new calls */
host->mrq = NULL;
+ tmio_mmc_abort_dma(host);
mmc_request_done(host->mmc, mrq);
}
host->mrq = NULL;
spin_unlock_irqrestore(&host->lock, flags);
+ if (mrq->cmd->error || (mrq->data && mrq->data->error))
+ tmio_mmc_abort_dma(host);
+
mmc_request_done(host->mmc, mrq);
}
{
struct mtd_info *mtd = dev_get_drvdata(dev);
- return mtd_suspend(mtd);
+ return mtd ? mtd_suspend(mtd) : 0;
}
static int mtd_cls_resume(struct device *dev)
!!host->board->rdy_pin_active_low;
}
+/*
+ * Minimal-overhead PIO for data access.
+ */
+static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+}
+
+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+}
+
+static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
+}
+
+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
+}
+
static void dma_complete_func(void *completion)
{
complete(completion);
static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
return;
- /* if no DMA operation possible, use PIO */
- memcpy_fromio(buf, chip->IO_ADDR_R, len);
+ if (host->board->bus_width_16)
+ atmel_read_buf16(mtd, buf, len);
+ else
+ atmel_read_buf8(mtd, buf, len);
}
static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
return;
- /* if no DMA operation possible, use PIO */
- memcpy_toio(chip->IO_ADDR_W, buf, len);
+ if (host->board->bus_width_16)
+ atmel_write_buf16(mtd, buf, len);
+ else
+ atmel_write_buf8(mtd, buf, len);
}
/*
* [1] enable the module.
* [2] reset the module.
*
- * In most of the cases, it's ok. But there is a hardware bug in the BCH block.
+ * In most of the cases, it's ok.
+ * But in MX23, there is a hardware bug in the BCH block (see erratum #2847).
* If you try to soft reset the BCH block, it becomes unusable until
* the next hard reset. This case occurs in the NAND boot mode. When the board
* boots by NAND, the ROM of the chip will initialize the BCH blocks itself.
* So If the driver tries to reset the BCH again, the BCH will not work anymore.
- * You will see a DMA timeout in this case.
+ * You will see a DMA timeout in this case. The bug has been fixed
+ * in the following chips, such as MX28.
*
* To avoid this bug, just add a new parameter `just_enable` for
* the mxs_reset_block(), and rewrite it here.
*/
-int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
+static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
{
int ret;
int timeout = 0x400;
if (ret)
goto err_out;
- ret = gpmi_reset_block(r->bch_regs, true);
+ /*
+ * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this
+ * chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
+ * On the other hand, the MX28 needs the reset, because one case has been
+ * seen where the BCH produced ECC errors constantly after 10000
+ * consecutive reboots. The latter case has not been seen on the MX23 yet,
+ * still we don't know if it could happen there as well.
+ */
+ ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
if (ret)
goto err_out;
instr->state = MTD_ERASING;
while (len) {
- /* Heck if we have a bad block, we do not erase bad blocks! */
+ /* Check if we have a bad block, we do not erase bad blocks! */
if (nand_block_checkbad(mtd, ((loff_t) page) <<
chip->page_shift, 0, allowbbt)) {
pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
for (i = 0; i < dlc; i++)
cc770_write_reg(priv, msgobj[mo].data[i], cf->data[i]);
+ /* Store echo skb before starting the transfer */
+ can_put_echo_skb(skb, dev, 0);
+
cc770_write_reg(priv, msgobj[mo].ctrl1,
RMTPND_RES | TXRQST_SET | CPUUPD_RES | NEWDAT_UNC);
stats->tx_bytes += dlc;
- can_put_echo_skb(skb, dev, 0);
/*
* HM: We had some cases of repeated IRQs so make sure the
#define CC770_IOSIZE 0x20
#define CC770_IOSIZE_INDIRECT 0x02
+/* Spinlock for cc770_isa_port_write_reg_indirect
+ * and cc770_isa_port_read_reg_indirect
+ */
+static DEFINE_SPINLOCK(cc770_isa_port_lock);
+
static struct platform_device *cc770_isa_devs[MAXDEV];
static u8 cc770_isa_mem_read_reg(const struct cc770_priv *priv, int reg)
int reg)
{
unsigned long base = (unsigned long)priv->reg_base;
+ unsigned long flags;
+ u8 val;
+ spin_lock_irqsave(&cc770_isa_port_lock, flags);
outb(reg, base);
- return inb(base + 1);
+ val = inb(base + 1);
+ spin_unlock_irqrestore(&cc770_isa_port_lock, flags);
+
+ return val;
}
static void cc770_isa_port_write_reg_indirect(const struct cc770_priv *priv,
int reg, u8 val)
{
unsigned long base = (unsigned long)priv->reg_base;
+ unsigned long flags;
+ spin_lock_irqsave(&cc770_isa_port_lock, flags);
outb(reg, base);
outb(val, base + 1);
+ spin_unlock_irqrestore(&cc770_isa_port_lock, flags);
}
static int __devinit cc770_isa_probe(struct platform_device *pdev)
(FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | FLEXCAN_ESR_BOFF_INT)
#define FLEXCAN_ESR_ERR_ALL \
(FLEXCAN_ESR_ERR_BUS | FLEXCAN_ESR_ERR_STATE)
+#define FLEXCAN_ESR_ALL_INT \
+ (FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | \
+ FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT)
/* FLEXCAN interrupt flag register (IFLAG) bits */
#define FLEXCAN_TX_BUF_ID 8
reg_iflag1 = flexcan_read(®s->iflag1);
reg_esr = flexcan_read(®s->esr);
- flexcan_write(FLEXCAN_ESR_ERR_INT, ®s->esr); /* ACK err IRQ */
+ /* ACK all bus error and state change IRQ sources */
+ if (reg_esr & FLEXCAN_ESR_ALL_INT)
+ flexcan_write(reg_esr & FLEXCAN_ESR_ALL_INT, ®s->esr);
/*
* schedule NAPI in case of:
#define PCH_IF_CREQ_BUSY BIT(15)
#define PCH_STATUS_INT 0x8000
+#define PCH_RP 0x00008000
#define PCH_REC 0x00007f00
#define PCH_TEC 0x000000ff
priv->can.can_stats.error_passive++;
state = CAN_STATE_ERROR_PASSIVE;
cf->can_id |= CAN_ERR_CRTL;
- if (((errc & PCH_REC) >> 8) > 127)
+ if (errc & PCH_RP)
cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
if ((errc & PCH_TEC) > 127)
cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
#define DRV_NAME "peak_pci"
struct peak_pci_chan {
- void __iomem *cfg_base; /* Common for all channels */
- struct net_device *next_dev; /* Chain of network devices */
- u16 icr_mask; /* Interrupt mask for fast ack */
+ void __iomem *cfg_base; /* Common for all channels */
+ struct net_device *prev_dev; /* Chain of network devices */
+ u16 icr_mask; /* Interrupt mask for fast ack */
};
#define PEAK_PCI_CAN_CLOCK (16000000 / 2)
{
struct sja1000_priv *priv;
struct peak_pci_chan *chan;
- struct net_device *dev, *dev0 = NULL;
+ struct net_device *dev;
void __iomem *cfg_base, *reg_base;
u16 sub_sys_id, icr;
int i, err, channels;
}
/* Create chain of SJA1000 devices */
- if (i == 0)
- dev0 = dev;
- else
- chan->next_dev = dev;
+ chan->prev_dev = pci_get_drvdata(pdev);
+ pci_set_drvdata(pdev, dev);
dev_info(&pdev->dev,
"%s at reg_base=0x%p cfg_base=0x%p irq=%d\n",
dev->name, priv->reg_base, chan->cfg_base, dev->irq);
}
- pci_set_drvdata(pdev, dev0);
-
/* Enable interrupts */
writew(icr, cfg_base + PITA_ICR + 2);
/* Disable interrupts */
writew(0x0, cfg_base + PITA_ICR + 2);
- for (dev = dev0; dev; dev = chan->next_dev) {
+ for (dev = pci_get_drvdata(pdev); dev; dev = chan->prev_dev) {
unregister_sja1000dev(dev);
free_sja1000dev(dev);
priv = netdev_priv(dev);
chan = priv->priv;
- dev = chan->next_dev;
}
pci_iounmap(pdev, reg_base);
static void __devexit peak_pci_remove(struct pci_dev *pdev)
{
- struct net_device *dev = pci_get_drvdata(pdev); /* First device */
+ struct net_device *dev = pci_get_drvdata(pdev); /* Last device */
struct sja1000_priv *priv = netdev_priv(dev);
struct peak_pci_chan *chan = priv->priv;
void __iomem *cfg_base = chan->cfg_base;
dev_info(&pdev->dev, "removing device %s\n", dev->name);
unregister_sja1000dev(dev);
free_sja1000dev(dev);
- dev = chan->next_dev;
+ dev = chan->prev_dev;
if (!dev)
break;
priv = netdev_priv(dev);
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
}
+static int sja1000_is_absent(struct sja1000_priv *priv)
+{
+ return (priv->read_reg(priv, REG_MOD) == 0xFF);
+}
+
static int sja1000_probe_chip(struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
- if (priv->reg_base && (priv->read_reg(priv, 0) == 0xFF)) {
+ if (priv->reg_base && sja1000_is_absent(priv)) {
printk(KERN_INFO "%s: probing @0x%lX failed\n",
DRV_NAME, dev->base_addr);
return 0;
while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
n++;
status = priv->read_reg(priv, REG_SR);
+ /* check for absent controller due to hw unplug */
+ if (status == 0xFF && sja1000_is_absent(priv))
+ return IRQ_NONE;
if (isrc & IRQ_WUI)
dev_warn(dev->dev.parent, "wakeup interrupt\n");
while (status & SR_RBS) {
sja1000_rx(dev);
status = priv->read_reg(priv, REG_SR);
+ /* check for absent controller */
+ if (status == 0xFF && sja1000_is_absent(priv))
+ return IRQ_NONE;
}
}
if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {
}
}
- netif_receive_skb(skb);
+ netif_rx(skb);
stats->rx_packets++;
stats->rx_bytes += cf->can_dlc;
+
return 0;
}
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
- if (err == -ENODEV)
- netif_device_detach(dev->netdev);
-
usb_unanchor_urb(urb);
usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf,
urb->transfer_dma);
err = usb_submit_urb(dev->intr_urb, GFP_KERNEL);
if (err) {
- if (err == -ENODEV)
- netif_device_detach(dev->netdev);
-
dev_warn(netdev->dev.parent, "intr URB submit failed: %d\n",
err);
return 0;
failed:
- if (err == -ENODEV)
- netif_device_detach(dev->netdev);
-
dev_warn(netdev->dev.parent, "couldn't submit control: %d\n", err);
return err;
ok = 1;
}
- if (!netif_carrier_ok(dev))
+ if (dev->flags & IFF_SLAVE || !netif_carrier_ok(dev))
next_tick = 5*HZ;
if (vp->medialock)
dev_info(&adapter->pdev->dev, "tx locked\n");
return NETDEV_TX_LOCKED;
}
- if (skb->mark == 0x01)
- type = atl1c_trans_high;
- else
- type = atl1c_trans_normal;
if (atl1c_tpd_avail(adapter, type) < tpd_req) {
/* no enough descriptor, just stop queue */
return err;
}
-static inline void __exit b44_pci_exit(void)
+static inline void b44_pci_exit(void)
{
#ifdef CONFIG_B44_PCI
ssb_pcihost_unregister(&b44_pci_driver);
if (priv->has_phy) {
/* connect to PHY */
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
- priv->mac_id ? "1" : "0", priv->phy_id);
+ priv->mii_bus->id, priv->phy_id);
phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0,
PHY_INTERFACE_MODE_MII);
skb = build_skb(data);
if (likely(skb)) {
-
#ifdef BNX2X_STOP_ON_ERROR
if (pad + len > fp->rx_buf_size) {
BNX2X_ERR("skb_put is about to fail... "
return;
}
-
+ kfree(new_data);
drop:
/* drop the packet and keep the buffer in the bin */
DP(NETIF_MSG_RX_STATUS,
module_param(dropless_fc, int, 0);
MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
-static int poll;
-module_param(poll, int, 0);
-MODULE_PARM_DESC(poll, " Use polling (for debug)");
-
static int mrrs = -1;
module_param(mrrs, int, 0);
MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
static void bnx2x_timer(unsigned long data)
{
- u8 cos;
struct bnx2x *bp = (struct bnx2x *) data;
if (!netif_running(bp->dev))
return;
- if (poll) {
- struct bnx2x_fastpath *fp = &bp->fp[0];
-
- for_each_cos_in_tx_queue(fp, cos)
- bnx2x_tx_int(bp, &fp->txdata[cos]);
- bnx2x_rx_int(fp, 1000);
- }
-
if (!BP_NOMCP(bp)) {
int mb_idx = BP_FW_MB_IDX(bp);
u32 drv_pulse;
static int __devinit bnx2x_init_bp(struct bnx2x *bp)
{
int func;
- int timer_interval;
int rc;
mutex_init(&bp->port.phy_mutex);
bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR;
- timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
- bp->current_interval = (poll ? poll : timer_interval);
+ bp->current_interval = CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ;
init_timer(&bp->timer);
bp->timer.expires = jiffies + bp->current_interval;
estats->rx_stat_ifhcinbadoctets_lo);
ADD_64(fstats->total_bytes_received_hi,
- tfunc->rcv_error_bytes.hi,
+ le32_to_cpu(tfunc->rcv_error_bytes.hi),
fstats->total_bytes_received_lo,
- tfunc->rcv_error_bytes.lo);
+ le32_to_cpu(tfunc->rcv_error_bytes.lo));
memcpy(estats, &(fstats->total_bytes_received_hi),
sizeof(struct host_func_stats) - 2*sizeof(u32));
ADD_64(estats->error_bytes_received_hi,
- tfunc->rcv_error_bytes.hi,
+ le32_to_cpu(tfunc->rcv_error_bytes.hi),
estats->error_bytes_received_lo,
- tfunc->rcv_error_bytes.lo);
+ le32_to_cpu(tfunc->rcv_error_bytes.lo));
ADD_64(estats->etherstatsoverrsizepkts_hi,
estats->rx_stat_dot3statsframestoolong_hi,
fl6.flowi6_oif = dst_addr->sin6_scope_id;
*dst = ip6_route_output(&init_net, NULL, &fl6);
- if (*dst)
+ if ((*dst)->error) {
+ dst_release(*dst);
+ *dst = NULL;
+ return -ENETUNREACH;
+ } else
return 0;
#endif
flash_attr = kzalloc(sizeof(struct bfa_flash_attr), GFP_KERNEL);
if (!flash_attr)
- return -ENOMEM;
+ return 0;
fcomp.bnad = bnad;
fcomp.comp_status = 0;
if (ret != BFA_STATUS_OK) {
spin_unlock_irqrestore(&bnad->bna_lock, flags);
kfree(flash_attr);
- goto out_err;
+ return 0;
}
spin_unlock_irqrestore(&bnad->bna_lock, flags);
wait_for_completion(&fcomp.comp);
}
kfree(flash_attr);
return flash_part;
-out_err:
- return -EINVAL;
}
static int
/* Query the flash partition based on the offset */
flash_part = bnad_get_flash_partition_by_offset(bnad,
eeprom->offset, &base_offset);
- if (flash_part <= 0)
+ if (flash_part == 0)
return -EFAULT;
fcomp.bnad = bnad;
/* Query the flash partition based on the offset */
flash_part = bnad_get_flash_partition_by_offset(bnad,
eeprom->offset, &base_offset);
- if (flash_part <= 0)
+ if (flash_part == 0)
return -EFAULT;
fcomp.bnad = bnad;
CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0;
*fcoe_enc_error = (desc->flags &
CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0;
- *fcoe_eof = (u8)((desc->checksum_fcoe >>
+ *fcoe_eof = (u8)((le16_to_cpu(desc->checksum_fcoe) >>
CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) &
CQ_ENET_RQ_DESC_FCOE_EOF_MASK);
*checksum = 0;
struct enic_port_profile *pp;
struct vic_provinfo *vp;
const u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
- const u16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
+ const __be16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
char uuid_str[38];
char client_mac_str[18];
u8 *client_mac;
be_do_flash(struct net_device *netdev, struct ethtool_flash *efl)
{
struct be_adapter *adapter = netdev_priv(netdev);
- char file_name[ETHTOOL_FLASH_MAX_FILENAME];
- file_name[ETHTOOL_FLASH_MAX_FILENAME - 1] = 0;
- strcpy(file_name, efl->data);
-
- return be_load_fw(adapter, file_name);
+ return be_load_fw(adapter, efl->data);
}
static int
printk(KERN_INFO
"%s: no PHY, assuming direct connection to switch\n",
ndev->name);
- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE);
+ strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE);
phy_id = 0;
}
- snprintf(phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+ snprintf(phy_name, sizeof(phy_name), PHY_ID_FMT, mdio_bus_id, phy_id);
phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link, 0,
fep->phy_interface);
if (IS_ERR(phy_dev)) {
e1000_setup_rctl(adapter);
e1000_set_rx_mode(netdev);
+ rctl = er32(RCTL);
+
/* turn on all-multi mode if wake on multicast is enabled */
- if (wufc & E1000_WUFC_MC) {
- rctl = er32(RCTL);
+ if (wufc & E1000_WUFC_MC)
rctl |= E1000_RCTL_MPE;
- ew32(RCTL, rctl);
- }
+
+ /* enable receives in the hardware */
+ ew32(RCTL, rctl | E1000_RCTL_EN);
if (hw->mac_type >= e1000_82540) {
ctrl = er32(CTRL);
vf_devfn = pdev->devfn + 0x80;
pvfdev = pci_get_device(hw->vendor_id, device_id, NULL);
while (pvfdev) {
- if (pvfdev->devfn == vf_devfn)
+ if (pvfdev->devfn == vf_devfn &&
+ (pvfdev->bus->number >= pdev->bus->number))
vfs_found++;
vf_devfn += vf_stride;
pvfdev = pci_get_device(hw->vendor_id,
################################################################################
#
# Intel(R) 82576 Virtual Function Linux driver
-# Copyright(c) 2009 - 2010 Intel Corporation.
+# Copyright(c) 2009 - 2012 Intel Corporation.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
+ Copyright(c) 2009 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
+ Copyright(c) 2009 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
+ Copyright(c) 2009 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
+ Copyright(c) 2009 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
static const char igbvf_driver_string[] =
"Intel(R) Gigabit Virtual Function Network Driver";
static const char igbvf_copyright[] =
- "Copyright (c) 2009 - 2011 Intel Corporation.";
+ "Copyright (c) 2009 - 2012 Intel Corporation.";
static int igbvf_poll(struct napi_struct *napi, int budget);
static void igbvf_reset(struct igbvf_adapter *);
/*******************************************************************************
Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
+ Copyright(c) 2009 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
+ Copyright(c) 2009 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
+ Copyright(c) 2009 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
################################################################################
#
# Intel 10 Gigabit PCI Express Linux driver
-# Copyright(c) 1999 - 2010 Intel Corporation.
+# Copyright(c) 1999 - 2012 Intel Corporation.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
-s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packtetbuf_num);
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num);
s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw);
s32 ixgbe_validate_mac_addr(u8 *mac_addr);
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
{
u8 err = 0;
+ u8 prio_tc[MAX_USER_PRIORITY] = {0};
+ int i;
struct ixgbe_adapter *adapter = netdev_priv(netdev);
/* Fail command if not in CEE mode */
if (!!state != !(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
return err;
- if (state > 0)
+ if (state > 0) {
err = ixgbe_setup_tc(netdev, adapter->dcb_cfg.num_tcs.pg_tcs);
- else
+ ixgbe_dcb_unpack_map(&adapter->dcb_cfg, DCB_TX_CONFIG, prio_tc);
+ } else {
err = ixgbe_setup_tc(netdev, 0);
+ }
+
+ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
+ netdev_set_prio_tc_map(netdev, i, prio_tc[i]);
return err;
}
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
sizeof(((struct rtnl_link_stats64 *)0)->m), \
offsetof(struct rtnl_link_stats64, m)
-static struct ixgbe_stats ixgbe_gstrings_stats[] = {
+static const struct ixgbe_stats ixgbe_gstrings_stats[] = {
{"rx_packets", IXGBE_NETDEV_STAT(rx_packets)},
{"tx_packets", IXGBE_NETDEV_STAT(tx_packets)},
{"rx_bytes", IXGBE_NETDEV_STAT(rx_bytes)},
#endif /* IXGBE_FCOE */
};
-#define IXGBE_QUEUE_STATS_LEN \
- ((((struct ixgbe_adapter *)netdev_priv(netdev))->num_tx_queues + \
- ((struct ixgbe_adapter *)netdev_priv(netdev))->num_rx_queues) * \
+/* ixgbe allocates num_tx_queues and num_rx_queues symmetrically so
+ * we set the num_rx_queues to evaluate to num_tx_queues. This is
+ * used because we do not have a good way to get the max number of
+ * rx queues with CONFIG_RPS disabled.
+ */
+#define IXGBE_NUM_RX_QUEUES netdev->num_tx_queues
+
+#define IXGBE_QUEUE_STATS_LEN ( \
+ (netdev->num_tx_queues + IXGBE_NUM_RX_QUEUES) * \
(sizeof(struct ixgbe_queue_stats) / sizeof(u64)))
#define IXGBE_GLOBAL_STATS_LEN ARRAY_SIZE(ixgbe_gstrings_stats)
#define IXGBE_PB_STATS_LEN ( \
- (((struct ixgbe_adapter *)netdev_priv(netdev))->flags & \
- IXGBE_FLAG_DCB_ENABLED) ? \
- (sizeof(((struct ixgbe_adapter *)0)->stats.pxonrxc) + \
- sizeof(((struct ixgbe_adapter *)0)->stats.pxontxc) + \
- sizeof(((struct ixgbe_adapter *)0)->stats.pxoffrxc) + \
- sizeof(((struct ixgbe_adapter *)0)->stats.pxofftxc)) \
- / sizeof(u64) : 0)
+ (sizeof(((struct ixgbe_adapter *)0)->stats.pxonrxc) + \
+ sizeof(((struct ixgbe_adapter *)0)->stats.pxontxc) + \
+ sizeof(((struct ixgbe_adapter *)0)->stats.pxoffrxc) + \
+ sizeof(((struct ixgbe_adapter *)0)->stats.pxofftxc)) \
+ / sizeof(u64))
#define IXGBE_STATS_LEN (IXGBE_GLOBAL_STATS_LEN + \
IXGBE_PB_STATS_LEN + \
IXGBE_QUEUE_STATS_LEN)
data[i] = (ixgbe_gstrings_stats[i].sizeof_stat ==
sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
}
- for (j = 0; j < adapter->num_tx_queues; j++) {
+ for (j = 0; j < IXGBE_NUM_RX_QUEUES; j++) {
ring = adapter->tx_ring[j];
+ if (!ring) {
+ data[i] = 0;
+ data[i+1] = 0;
+ i += 2;
+ continue;
+ }
+
do {
start = u64_stats_fetch_begin_bh(&ring->syncp);
data[i] = ring->stats.packets;
} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
i += 2;
}
- for (j = 0; j < adapter->num_rx_queues; j++) {
+ for (j = 0; j < IXGBE_NUM_RX_QUEUES; j++) {
ring = adapter->rx_ring[j];
+ if (!ring) {
+ data[i] = 0;
+ data[i+1] = 0;
+ i += 2;
+ continue;
+ }
+
do {
start = u64_stats_fetch_begin_bh(&ring->syncp);
data[i] = ring->stats.packets;
} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
i += 2;
}
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- for (j = 0; j < MAX_TX_PACKET_BUFFERS; j++) {
- data[i++] = adapter->stats.pxontxc[j];
- data[i++] = adapter->stats.pxofftxc[j];
- }
- for (j = 0; j < MAX_RX_PACKET_BUFFERS; j++) {
- data[i++] = adapter->stats.pxonrxc[j];
- data[i++] = adapter->stats.pxoffrxc[j];
- }
+
+ for (j = 0; j < IXGBE_MAX_PACKET_BUFFERS; j++) {
+ data[i++] = adapter->stats.pxontxc[j];
+ data[i++] = adapter->stats.pxofftxc[j];
+ }
+ for (j = 0; j < IXGBE_MAX_PACKET_BUFFERS; j++) {
+ data[i++] = adapter->stats.pxonrxc[j];
+ data[i++] = adapter->stats.pxoffrxc[j];
}
}
static void ixgbe_get_strings(struct net_device *netdev, u32 stringset,
u8 *data)
{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
char *p = (char *)data;
int i;
ETH_GSTRING_LEN);
p += ETH_GSTRING_LEN;
}
- for (i = 0; i < adapter->num_tx_queues; i++) {
+ for (i = 0; i < netdev->num_tx_queues; i++) {
sprintf(p, "tx_queue_%u_packets", i);
p += ETH_GSTRING_LEN;
sprintf(p, "tx_queue_%u_bytes", i);
p += ETH_GSTRING_LEN;
}
- for (i = 0; i < adapter->num_rx_queues; i++) {
+ for (i = 0; i < IXGBE_NUM_RX_QUEUES; i++) {
sprintf(p, "rx_queue_%u_packets", i);
p += ETH_GSTRING_LEN;
sprintf(p, "rx_queue_%u_bytes", i);
p += ETH_GSTRING_LEN;
}
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) {
- sprintf(p, "tx_pb_%u_pxon", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "tx_pb_%u_pxoff", i);
- p += ETH_GSTRING_LEN;
- }
- for (i = 0; i < MAX_RX_PACKET_BUFFERS; i++) {
- sprintf(p, "rx_pb_%u_pxon", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "rx_pb_%u_pxoff", i);
- p += ETH_GSTRING_LEN;
- }
+ for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) {
+ sprintf(p, "tx_pb_%u_pxon", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_pb_%u_pxoff", i);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) {
+ sprintf(p, "rx_pb_%u_pxon", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_pb_%u_pxoff", i);
+ p += ETH_GSTRING_LEN;
}
/* BUG_ON(p - data != IXGBE_STATS_LEN * ETH_GSTRING_LEN); */
break;
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
__stringify(BUILD) "-k"
const char ixgbe_driver_version[] = DRV_VERSION;
static const char ixgbe_copyright[] =
- "Copyright (c) 1999-2011 Intel Corporation.";
+ "Copyright (c) 1999-2012 Intel Corporation.";
static const struct ixgbe_info *ixgbe_info_tbl[] = {
[board_82598] = &ixgbe_82598_info,
/*
* we must limit the number of descriptors so that the
* total size of max desc * buf_len is not greater
- * than 65535
+ * than 65536
*/
if (ring_is_ps_enabled(ring)) {
-#if (MAX_SKB_FRAGS > 16)
+#if (PAGE_SIZE < 8192)
rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
-#elif (MAX_SKB_FRAGS > 8)
+#elif (PAGE_SIZE < 16384)
rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
-#elif (MAX_SKB_FRAGS > 4)
+#elif (PAGE_SIZE < 32768)
rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
#else
rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
#endif
} else {
- if (rx_buf_len < IXGBE_RXBUFFER_4K)
+ if (rx_buf_len <= IXGBE_RXBUFFER_4K)
rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
- else if (rx_buf_len < IXGBE_RXBUFFER_8K)
+ else if (rx_buf_len <= IXGBE_RXBUFFER_8K)
rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
else
rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl | vt_reg_bits);
vf_shift = adapter->num_vfs % 32;
- reg_offset = (adapter->num_vfs > 32) ? 1 : 0;
+ reg_offset = (adapter->num_vfs >= 32) ? 1 : 0;
/* Enable only the PF's pool for Tx/Rx */
IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), (1 << vf_shift));
adapter->num_tx_queues = 1;
done:
+ if ((adapter->netdev->reg_state == NETREG_UNREGISTERED) ||
+ (adapter->netdev->reg_state == NETREG_UNREGISTERING))
+ return 0;
+
/* Notify the stack of the (possibly) reduced queue counts. */
netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues);
return netif_set_real_num_rx_queues(adapter->netdev,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
vf_devfn = pdev->devfn + 0x80;
pvfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, device_id, NULL);
while (pvfdev) {
- if (pvfdev->devfn == vf_devfn)
+ if (pvfdev->devfn == vf_devfn &&
+ (pvfdev->bus->number >= pdev->bus->number))
vfs_found++;
vf_devfn += 2;
pvfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID,
ixgbe_ndo_set_vf_spoofchk(adapter->netdev, vf, false);
retval = ixgbe_set_vf_macvlan(adapter, vf, index,
(unsigned char *)(&msgbuf[1]));
+ if (retval == -ENOSPC)
+ e_warn(drv, "VF %d has requested a MACVLAN filter "
+ "but there is no space for it\n", vf);
break;
default:
e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
################################################################################
#
# Intel 82599 Virtual Function driver
-# Copyright(c) 1999 - 2010 Intel Corporation.
+# Copyright(c) 1999 - 2012 Intel Corporation.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
#define DRV_VERSION "2.2.0-k"
const char ixgbevf_driver_version[] = DRV_VERSION;
static char ixgbevf_copyright[] =
- "Copyright (c) 2009 - 2010 Intel Corporation.";
+ "Copyright (c) 2009 - 2012 Intel Corporation.";
static const struct ixgbevf_info *ixgbevf_info_tbl[] = {
[board_82599_vf] = &ixgbevf_82599_vf_info,
if (msg & IXGBE_VT_MSGTYPE_NACK)
pr_warn("Last Request of type %2.2x to PF Nacked\n",
msg & 0xFF);
- goto out;
+ /*
+ * Restore the PFSTS bit in case someone is polling for a
+ * return message from the PF
+ */
+ hw->mbx.v2p_mailbox |= IXGBE_VFMAILBOX_PFSTS;
}
/*
*/
if (got_ack)
hw->mbx.v2p_mailbox |= IXGBE_VFMAILBOX_PFACK;
-out:
+
return IRQ_HANDLED;
}
/*******************************************************************************
Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
/*******************************************************************************
Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
return ret_val;
}
+static void ixgbevf_write_msg_read_ack(struct ixgbe_hw *hw,
+ u32 *msg, u16 size)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 retmsg[IXGBE_VFMAILBOX_SIZE];
+ s32 retval = mbx->ops.write_posted(hw, msg, size);
+
+ if (!retval)
+ mbx->ops.read_posted(hw, retmsg, size);
+}
+
/**
* ixgbevf_update_mc_addr_list_vf - Update Multicast addresses
* @hw: pointer to the HW structure
struct net_device *netdev)
{
struct netdev_hw_addr *ha;
- struct ixgbe_mbx_info *mbx = &hw->mbx;
u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
u16 *vector_list = (u16 *)&msgbuf[1];
u32 cnt, i;
vector_list[i++] = ixgbevf_mta_vector(hw, ha->addr);
}
- mbx->ops.write_posted(hw, msgbuf, IXGBE_VFMAILBOX_SIZE);
+ ixgbevf_write_msg_read_ack(hw, msgbuf, IXGBE_VFMAILBOX_SIZE);
return 0;
}
static s32 ixgbevf_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
bool vlan_on)
{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
u32 msgbuf[2];
msgbuf[0] = IXGBE_VF_SET_VLAN;
/* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
- return mbx->ops.write_posted(hw, msgbuf, 2);
+ ixgbevf_write_msg_read_ack(hw, msgbuf, 2);
+
+ return 0;
}
/**
/*******************************************************************************
Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
((new_mtu) < IPV6_MIN_MTU))
return -EINVAL;
- if (new_mtu > 4000) {
- jme->reg_rxcs &= ~RXCS_FIFOTHNP;
- jme->reg_rxcs |= RXCS_FIFOTHNP_64QW;
- jme_restart_rx_engine(jme);
- } else {
- jme->reg_rxcs &= ~RXCS_FIFOTHNP;
- jme->reg_rxcs |= RXCS_FIFOTHNP_128QW;
- jme_restart_rx_engine(jme);
- }
netdev->mtu = new_mtu;
netdev_update_features(netdev);
+ jme_restart_rx_engine(jme);
jme_reset_link(jme);
return 0;
RXCS_RETRYCNT_60 = 0x00000F00,
RXCS_DEFAULT = RXCS_FIFOTHTP_128T |
- RXCS_FIFOTHNP_128QW |
+ RXCS_FIFOTHNP_16QW |
RXCS_DMAREQSZ_128B |
RXCS_RETRYGAP_256ns |
RXCS_RETRYCNT_32,
}
/* Allocate and setup a new buffer for receiving */
-static int skge_rx_setup(struct pci_dev *pdev,
- struct skge_element *e,
- struct sk_buff *skb, unsigned int bufsize)
+static void skge_rx_setup(struct skge_port *skge, struct skge_element *e,
+ struct sk_buff *skb, unsigned int bufsize)
{
struct skge_rx_desc *rd = e->desc;
- dma_addr_t map;
+ u64 map;
- map = pci_map_single(pdev, skb->data, bufsize,
+ map = pci_map_single(skge->hw->pdev, skb->data, bufsize,
PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(pdev, map))
- goto mapping_error;
- rd->dma_lo = lower_32_bits(map);
- rd->dma_hi = upper_32_bits(map);
+ rd->dma_lo = map;
+ rd->dma_hi = map >> 32;
e->skb = skb;
rd->csum1_start = ETH_HLEN;
rd->csum2_start = ETH_HLEN;
rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | bufsize;
dma_unmap_addr_set(e, mapaddr, map);
dma_unmap_len_set(e, maplen, bufsize);
- return 0;
-
-mapping_error:
- if (net_ratelimit())
- dev_warn(&pdev->dev, "%s: rx mapping error\n",
- skb->dev->name);
- return -EIO;
}
/* Resume receiving using existing skb,
return -ENOMEM;
skb_reserve(skb, NET_IP_ALIGN);
- if (skge_rx_setup(skge->hw->pdev, e, skb, skge->rx_buf_size)) {
- kfree_skb(skb);
- return -ENOMEM;
- }
-
+ skge_rx_setup(skge, e, skb, skge->rx_buf_size);
} while ((e = e->next) != ring->start);
ring->to_clean = ring->start;
struct skge_tx_desc *td;
int i;
u32 control, len;
- dma_addr_t map;
+ u64 map;
if (skb_padto(skb, ETH_ZLEN))
return NETDEV_TX_OK;
e->skb = skb;
len = skb_headlen(skb);
map = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
- if (pci_dma_mapping_error(hw->pdev, map))
- goto mapping_error;
-
dma_unmap_addr_set(e, mapaddr, map);
dma_unmap_len_set(e, maplen, len);
- td->dma_lo = lower_32_bits(map);
- td->dma_hi = upper_32_bits(map);
+ td->dma_lo = map;
+ td->dma_hi = map >> 32;
if (skb->ip_summed == CHECKSUM_PARTIAL) {
const int offset = skb_checksum_start_offset(skb);
map = skb_frag_dma_map(&hw->pdev->dev, frag, 0,
skb_frag_size(frag), DMA_TO_DEVICE);
- if (dma_mapping_error(&hw->pdev->dev, map))
- goto mapping_unwind;
e = e->next;
e->skb = skb;
tf = e->desc;
BUG_ON(tf->control & BMU_OWN);
- tf->dma_lo = lower_32_bits(map);
- tf->dma_hi = upper_32_bits(map);
+ tf->dma_lo = map;
+ tf->dma_hi = (u64) map >> 32;
dma_unmap_addr_set(e, mapaddr, map);
dma_unmap_len_set(e, maplen, skb_frag_size(frag));
}
return NETDEV_TX_OK;
-
-mapping_unwind:
- /* unroll any pages that were already mapped. */
- if (e != skge->tx_ring.to_use) {
- struct skge_element *u;
-
- for (u = skge->tx_ring.to_use->next; u != e; u = u->next)
- pci_unmap_page(hw->pdev, dma_unmap_addr(u, mapaddr),
- dma_unmap_len(u, maplen),
- PCI_DMA_TODEVICE);
- e = skge->tx_ring.to_use;
- }
- /* undo the mapping for the skb header */
- pci_unmap_single(hw->pdev, dma_unmap_addr(e, mapaddr),
- dma_unmap_len(e, maplen),
- PCI_DMA_TODEVICE);
-mapping_error:
- /* mapping error causes error message and packet to be discarded. */
- if (net_ratelimit())
- dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
}
if (!nskb)
goto resubmit;
- if (unlikely(skge_rx_setup(skge->hw->pdev, e, nskb, skge->rx_buf_size))) {
- dev_kfree_skb(nskb);
- goto resubmit;
- }
-
pci_unmap_single(skge->hw->pdev,
dma_unmap_addr(e, mapaddr),
dma_unmap_len(e, maplen),
PCI_DMA_FROMDEVICE);
skb = e->skb;
prefetch(skb->data);
+ skge_rx_setup(skge, e, nskb, skge->rx_buf_size);
}
skb_put(skb, len);
kfree(priv->mfunc.master.slave_state[i].vlan_filter[port]);
}
kfree(priv->mfunc.master.slave_state);
- iounmap(priv->mfunc.comm);
- dma_free_coherent(&(dev->pdev->dev), PAGE_SIZE,
- priv->mfunc.vhcr,
- priv->mfunc.vhcr_dma);
- priv->mfunc.vhcr = NULL;
}
+
+ iounmap(priv->mfunc.comm);
+ dma_free_coherent(&(dev->pdev->dev), PAGE_SIZE,
+ priv->mfunc.vhcr, priv->mfunc.vhcr_dma);
+ priv->mfunc.vhcr = NULL;
}
void mlx4_cmd_cleanup(struct mlx4_dev *dev)
for (i = 0; i < priv->rx_ring_num; i++) {
if (priv->rx_ring[i].rx_info)
- mlx4_en_destroy_rx_ring(priv, &priv->rx_ring[i]);
+ mlx4_en_destroy_rx_ring(priv, &priv->rx_ring[i],
+ priv->prof->rx_ring_size, priv->stride);
if (priv->rx_cq[i].buf)
mlx4_en_destroy_cq(priv, &priv->rx_cq[i]);
}
return 0;
err:
- while (i--)
+ while (i--) {
+ dma_addr_t dma = be64_to_cpu(rx_desc->data[i].addr);
+ pci_unmap_single(priv->mdev->pdev, dma, skb_frags[i].size,
+ PCI_DMA_FROMDEVICE);
put_page(skb_frags[i].page);
+ }
return -ENOMEM;
}
}
void mlx4_en_destroy_rx_ring(struct mlx4_en_priv *priv,
- struct mlx4_en_rx_ring *ring)
+ struct mlx4_en_rx_ring *ring, u32 size, u16 stride)
{
struct mlx4_en_dev *mdev = priv->mdev;
mlx4_en_unmap_buffer(&ring->wqres.buf);
- mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size + TXBB_SIZE);
+ mlx4_free_hwq_res(mdev->dev, &ring->wqres, size * stride + TXBB_SIZE);
vfree(ring->rx_info);
ring->rx_info = NULL;
}
int err;
int i;
- priv->eq_table.uar_map = kcalloc(sizeof *priv->eq_table.uar_map,
- mlx4_num_eq_uar(dev), GFP_KERNEL);
+ priv->eq_table.uar_map = kcalloc(mlx4_num_eq_uar(dev),
+ sizeof *priv->eq_table.uar_map,
+ GFP_KERNEL);
if (!priv->eq_table.uar_map) {
err = -ENOMEM;
goto err_out_free;
struct mlx4_priv *priv = mlx4_priv(dev);
int vec = 0, err = 0, i;
- spin_lock(&priv->msix_ctl.pool_lock);
+ mutex_lock(&priv->msix_ctl.pool_lock);
for (i = 0; !vec && i < dev->caps.comp_pool; i++) {
if (~priv->msix_ctl.pool_bm & 1ULL << i) {
priv->msix_ctl.pool_bm |= 1ULL << i;
eq_set_ci(&priv->eq_table.eq[vec], 1);
}
}
- spin_unlock(&priv->msix_ctl.pool_lock);
+ mutex_unlock(&priv->msix_ctl.pool_lock);
if (vec) {
*vector = vec;
if (likely(i >= 0)) {
/*sanity check , making sure were not trying to free irq's
Belonging to a legacy EQ*/
- spin_lock(&priv->msix_ctl.pool_lock);
+ mutex_lock(&priv->msix_ctl.pool_lock);
if (priv->msix_ctl.pool_bm & 1ULL << i) {
free_irq(priv->eq_table.eq[vec].irq,
&priv->eq_table.eq[vec]);
priv->msix_ctl.pool_bm &= ~(1ULL << i);
}
- spin_unlock(&priv->msix_ctl.pool_lock);
+ mutex_unlock(&priv->msix_ctl.pool_lock);
}
}
return err;
}
-static int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port)
+int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port)
{
struct mlx4_cmd_mailbox *outbox = ptr;
for (port = 0; port < dev->caps.num_ports; port++) {
/* Change the port type only if the new type is different
* from the current, and not set to Auto */
- if (port_types[port] != dev->caps.port_type[port + 1]) {
+ if (port_types[port] != dev->caps.port_type[port + 1])
change = 1;
- dev->caps.port_type[port + 1] = port_types[port];
- }
}
if (change) {
mlx4_unregister_device(dev);
for (port = 1; port <= dev->caps.num_ports; port++) {
mlx4_CLOSE_PORT(dev, port);
+ dev->caps.port_type[port] = port_types[port - 1];
err = mlx4_SET_PORT(dev, port);
if (err) {
mlx4_err(dev, "Failed to set port %d, "
resource_size_t bf_len;
int err = 0;
+ if (!dev->caps.bf_reg_size)
+ return -ENXIO;
+
bf_start = pci_resource_start(dev->pdev, 2) +
(dev->caps.num_uars << PAGE_SHIFT);
bf_len = pci_resource_len(dev->pdev, 2) -
goto err_master_mfunc;
priv->msix_ctl.pool_bm = 0;
- spin_lock_init(&priv->msix_ctl.pool_lock);
+ mutex_init(&priv->msix_ctl.pool_lock);
mlx4_enable_msi_x(dev);
if ((mlx4_is_mfunc(dev)) &&
u32 prot;
int err;
- s_steer = &mlx4_priv(dev)->steer[0];
+ s_steer = &mlx4_priv(dev)->steer[port - 1];
new_entry = kzalloc(sizeof *new_entry, GFP_KERNEL);
if (!new_entry)
return -ENOMEM;
struct mlx4_promisc_qp *pqp;
struct mlx4_promisc_qp *dqp;
- s_steer = &mlx4_priv(dev)->steer[0];
+ s_steer = &mlx4_priv(dev)->steer[port - 1];
pqp = get_promisc_qp(dev, 0, steer, qpn);
if (!pqp)
struct mlx4_steer_index *tmp_entry, *entry = NULL;
struct mlx4_promisc_qp *dqp, *tmp_dqp;
- s_steer = &mlx4_priv(dev)->steer[0];
+ s_steer = &mlx4_priv(dev)->steer[port - 1];
/* if qp is not promisc, it cannot be duplicated */
if (!get_promisc_qp(dev, 0, steer, qpn))
bool ret = false;
int i;
- s_steer = &mlx4_priv(dev)->steer[0];
+ s_steer = &mlx4_priv(dev)->steer[port - 1];
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox))
int err;
struct mlx4_priv *priv = mlx4_priv(dev);
- s_steer = &mlx4_priv(dev)->steer[0];
+ s_steer = &mlx4_priv(dev)->steer[port - 1];
mutex_lock(&priv->mcg_table.mutex);
int loc, i;
int err;
- s_steer = &mlx4_priv(dev)->steer[0];
+ s_steer = &mlx4_priv(dev)->steer[port - 1];
mutex_lock(&priv->mcg_table.mutex);
pqp = get_promisc_qp(dev, 0, steer, qpn);
int mlx4_unicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port)
{
- if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_MC_STEER))
+ if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_UC_STEER))
return 0;
if (mlx4_is_mfunc(dev))
int mlx4_unicast_promisc_remove(struct mlx4_dev *dev, u32 qpn, u8 port)
{
- if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_MC_STEER))
+ if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_UC_STEER))
return 0;
if (mlx4_is_mfunc(dev))
struct mlx4_msix_ctl {
u64 pool_bm;
- spinlock_t pool_lock;
+ struct mutex pool_lock;
};
struct mlx4_steer {
struct mlx4_en_rx_ring *ring,
u32 size, u16 stride);
void mlx4_en_destroy_rx_ring(struct mlx4_en_priv *priv,
- struct mlx4_en_rx_ring *ring);
+ struct mlx4_en_rx_ring *ring,
+ u32 size, u16 stride);
int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv);
void mlx4_en_deactivate_rx_ring(struct mlx4_en_priv *priv,
struct mlx4_en_rx_ring *ring);
MLX4_CMD_TIME_CLASS_B, MLX4_CMD_WRAPPED);
}
-static int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align,
+int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align,
u32 *base_mridx)
{
struct mlx4_priv *priv = mlx4_priv(dev);
}
EXPORT_SYMBOL_GPL(mlx4_mr_reserve_range);
-static void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt)
+void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt)
{
struct mlx4_priv *priv = mlx4_priv(dev);
mlx4_bitmap_free_range(&priv->mr_table.mpt_bitmap, base_mridx, cnt);
}
EXPORT_SYMBOL_GPL(mlx4_mr_release_range);
-static int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd,
+int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd,
u64 iova, u64 size, u32 access, int npages,
int page_shift, struct mlx4_mr *mr)
{
}
EXPORT_SYMBOL_GPL(mlx4_mr_alloc);
-static void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr)
+void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr)
{
int err;
}
EXPORT_SYMBOL_GPL(mlx4_fmr_alloc);
-static int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx,
+int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx,
u32 pd, u32 access, int max_pages,
int max_maps, u8 page_shift, struct mlx4_fmr *fmr)
{
}
EXPORT_SYMBOL_GPL(mlx4_fmr_free);
-static int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr)
+int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr)
{
if (fmr->maps)
return -EBUSY;
struct list_head list;
u8 gid[16];
enum mlx4_protocol prot;
+ enum mlx4_steer_type steer;
};
enum res_qp_states {
ret->com.res_id = id;
ret->com.state = RES_QP_RESERVED;
+ ret->local_qpn = id;
INIT_LIST_HEAD(&ret->mcg_list);
spin_lock_init(&ret->mcg_spl);
}
static int add_mcg_res(struct mlx4_dev *dev, int slave, struct res_qp *rqp,
- u8 *gid, enum mlx4_protocol prot)
+ u8 *gid, enum mlx4_protocol prot,
+ enum mlx4_steer_type steer)
{
struct res_gid *res;
int err;
} else {
memcpy(res->gid, gid, 16);
res->prot = prot;
+ res->steer = steer;
list_add_tail(&res->list, &rqp->mcg_list);
err = 0;
}
}
static int rem_mcg_res(struct mlx4_dev *dev, int slave, struct res_qp *rqp,
- u8 *gid, enum mlx4_protocol prot)
+ u8 *gid, enum mlx4_protocol prot,
+ enum mlx4_steer_type steer)
{
struct res_gid *res;
int err;
spin_lock_irq(&rqp->mcg_spl);
res = find_gid(dev, slave, rqp, gid);
- if (!res || res->prot != prot)
+ if (!res || res->prot != prot || res->steer != steer)
err = -EINVAL;
else {
list_del(&res->list);
int attach = vhcr->op_modifier;
int block_loopback = vhcr->in_modifier >> 31;
u8 steer_type_mask = 2;
- enum mlx4_steer_type type = gid[7] & steer_type_mask;
+ enum mlx4_steer_type type = (gid[7] & steer_type_mask) >> 1;
qpn = vhcr->in_modifier & 0xffffff;
err = get_res(dev, slave, qpn, RES_QP, &rqp);
qp.qpn = qpn;
if (attach) {
- err = add_mcg_res(dev, slave, rqp, gid, prot);
+ err = add_mcg_res(dev, slave, rqp, gid, prot, type);
if (err)
goto ex_put;
if (err)
goto ex_rem;
} else {
- err = rem_mcg_res(dev, slave, rqp, gid, prot);
+ err = rem_mcg_res(dev, slave, rqp, gid, prot, type);
if (err)
goto ex_put;
err = mlx4_qp_detach_common(dev, &qp, gid, prot, type);
ex_rem:
/* ignore error return below, already in error */
- err1 = rem_mcg_res(dev, slave, rqp, gid, prot);
+ err1 = rem_mcg_res(dev, slave, rqp, gid, prot, type);
ex_put:
put_res(dev, slave, qpn, RES_QP);
list_for_each_entry_safe(rgid, tmp, &rqp->mcg_list, list) {
qp.qpn = rqp->local_qpn;
err = mlx4_qp_detach_common(dev, &qp, rgid->gid, rgid->prot,
- MLX4_MC_STEER);
+ rgid->steer);
list_del(&rgid->list);
kfree(rgid);
}
select NET_CORE
select MII
select CRC32
- select MISC_DEVICES
select EEPROM_93CX6
---help---
SPI driver for Micrel KS8851 SPI attached network chip.
ks8851_dbg_dumpkkt(ks, rxpkt);
skb->protocol = eth_type_trans(skb, ks->netdev);
- netif_rx(skb);
+ netif_rx_ni(skb);
ks->netdev->stats.rx_packets++;
ks->netdev->stats.rx_bytes += rxlen;
* @msg_enable : The message flags controlling driver output (see ethtool).
* @frame_cnt : number of frames received.
* @bus_width : i/o bus width.
- * @irq : irq number assigned to this device.
* @rc_rxqcr : Cached copy of KS_RXQCR.
* @rc_txcr : Cached copy of KS_TXCR.
* @rc_ier : Cached copy of KS_IER.
u32 msg_enable;
u32 frame_cnt;
int bus_width;
- int irq;
u16 rc_rxqcr;
u16 rc_txcr;
netif_dbg(ks, ifup, ks->netdev, "%s - entry\n", __func__);
/* reset the HW */
- err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev);
+ err = request_irq(netdev->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev);
if (err) {
- pr_err("Failed to request IRQ: %d: %d\n", ks->irq, err);
+ pr_err("Failed to request IRQ: %d: %d\n", netdev->irq, err);
return err;
}
/* set powermode to soft power down to save power */
ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
- free_irq(ks->irq, netdev);
+ free_irq(netdev->irq, netdev);
mutex_unlock(&ks->lock);
return 0;
}
if (!ks->hw_addr_cmd)
goto err_ioremap1;
- ks->irq = platform_get_irq(pdev, 0);
+ netdev->irq = platform_get_irq(pdev, 0);
- if (ks->irq < 0) {
- err = ks->irq;
+ if ((int)netdev->irq < 0) {
+ err = netdev->irq;
goto err_get_irq;
}
static int octeon_mgmt_init_phy(struct net_device *netdev)
{
struct octeon_mgmt *p = netdev_priv(netdev);
- char phy_id[20];
+ char phy_id[MII_BUS_ID_SIZE + 3];
if (octeon_is_simulation()) {
/* No PHYs in the simulator. */
return 0;
}
- snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", p->port);
+ snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "mdio-octeon-0", p->port);
p->phydev = phy_connect(netdev, phy_id, octeon_mgmt_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
#include <linux/sh_eth.h>
#include "sh_eth.h"
sh_eth_write(ndev, 0, TRIMD);
/* Recv frame limit set register */
- sh_eth_write(ndev, RFLR_VALUE, RFLR);
+ sh_eth_write(ndev, ndev->mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN,
+ RFLR);
sh_eth_write(ndev, sh_eth_read(ndev, EESR), EESR);
sh_eth_write(ndev, mdp->cd->eesipr_value, EESIPR);
RPADIR_PADR = 0x0003f,
};
-/* RFLR */
-#define RFLR_VALUE 0x1000
-
/* FDR */
#define DEFAULT_FDR_INIT 0x00000707
if (unlikely(!skb))
return -ENOMEM;
- /* Adjust the SKB for padding and checksum */
+ /* Adjust the SKB for padding */
skb_reserve(skb, NET_IP_ALIGN);
rx_buf->len = skb_len - NET_IP_ALIGN;
rx_buf->is_page = false;
- skb->ip_summed = CHECKSUM_UNNECESSARY;
rx_buf->dma_addr = pci_map_single(efx->pci_dev,
skb->data, rx_buf->len,
EFX_BUG_ON_PARANOID(!checksummed);
rx_buf->u.skb = NULL;
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
gro_result = napi_gro_receive(napi, skb);
}
unsigned long ipc_csum_error;
unsigned long rx_collision;
unsigned long rx_crc;
+ unsigned long dribbling_bit;
unsigned long rx_length;
unsigned long rx_mii;
unsigned long rx_multicast;
if (unlikely(p->des01.erx.dribbling)) {
CHIP_DBG(KERN_ERR "GMAC RX: dribbling error\n");
- ret = discard_frame;
+ x->dribbling_bit++;
}
if (unlikely(p->des01.erx.sa_filter_fail)) {
CHIP_DBG(KERN_ERR "GMAC RX : Source Address filter fail\n");
ret = discard_frame;
}
if (unlikely(p->des01.rx.dribbling))
- ret = discard_frame;
+ x->dribbling_bit++;
if (unlikely(p->des01.rx.length_error)) {
x->rx_length++;
*******************************************************************************/
#define STMMAC_RESOURCE_NAME "stmmaceth"
-#define DRV_MODULE_VERSION "Dec_2011"
+#define DRV_MODULE_VERSION "Feb_2012"
#include <linux/stmmac.h>
#include <linux/phy.h>
#include "common.h"
int stmmac_suspend(struct net_device *ndev);
int stmmac_dvr_remove(struct net_device *ndev);
struct stmmac_priv *stmmac_dvr_probe(struct device *device,
- struct plat_stmmacenet_data *plat_dat);
+ struct plat_stmmacenet_data *plat_dat,
+ void __iomem *addr);
offsetof(struct stmmac_priv, xstats.m)}
static const struct stmmac_stats stmmac_gstrings_stats[] = {
+ /* Transmit errors */
STMMAC_STAT(tx_underflow),
STMMAC_STAT(tx_carrier),
STMMAC_STAT(tx_losscarrier),
STMMAC_STAT(vlan_tag),
STMMAC_STAT(tx_deferred),
STMMAC_STAT(tx_vlan),
- STMMAC_STAT(rx_vlan),
STMMAC_STAT(tx_jabber),
STMMAC_STAT(tx_frame_flushed),
STMMAC_STAT(tx_payload_error),
STMMAC_STAT(tx_ip_header_error),
+ /* Receive errors */
STMMAC_STAT(rx_desc),
STMMAC_STAT(sa_filter_fail),
STMMAC_STAT(overflow_error),
STMMAC_STAT(ipc_csum_error),
STMMAC_STAT(rx_collision),
STMMAC_STAT(rx_crc),
+ STMMAC_STAT(dribbling_bit),
STMMAC_STAT(rx_length),
STMMAC_STAT(rx_mii),
STMMAC_STAT(rx_multicast),
STMMAC_STAT(sa_rx_filter_fail),
STMMAC_STAT(rx_missed_cntr),
STMMAC_STAT(rx_overflow_cntr),
+ STMMAC_STAT(rx_vlan),
+ /* Tx/Rx IRQ errors */
STMMAC_STAT(tx_undeflow_irq),
STMMAC_STAT(tx_process_stopped_irq),
STMMAC_STAT(tx_jabber_irq),
STMMAC_STAT(rx_watchdog_irq),
STMMAC_STAT(tx_early_irq),
STMMAC_STAT(fatal_bus_error_irq),
+ /* Extra info */
STMMAC_STAT(threshold),
STMMAC_STAT(tx_pkt_n),
STMMAC_STAT(rx_pkt_n),
case 1000:
if (likely(priv->plat->has_gmac))
ctrl &= ~priv->hw->link.port;
- stmmac_hw_fix_mac_speed(priv);
+ stmmac_hw_fix_mac_speed(priv);
break;
case 100:
case 10:
u32 uid = ((hwid & 0x0000ff00) >> 8);
u32 synid = (hwid & 0x000000ff);
- pr_info("STMMAC - user ID: 0x%x, Synopsys ID: 0x%x\n",
+ pr_info("stmmac - user ID: 0x%x, Synopsys ID: 0x%x\n",
uid, synid);
return synid;
return hw_cap;
}
-/**
- * stmmac_mac_device_setup
- * @dev : device pointer
- * Description: this is to attach the GMAC or MAC 10/100
- * main core structures that will be completed during the
- * open step.
- */
-static int stmmac_mac_device_setup(struct net_device *dev)
-{
- struct stmmac_priv *priv = netdev_priv(dev);
-
- struct mac_device_info *device;
-
- if (priv->plat->has_gmac)
- device = dwmac1000_setup(priv->ioaddr);
- else
- device = dwmac100_setup(priv->ioaddr);
-
- if (!device)
- return -ENOMEM;
-
- priv->hw = device;
- priv->hw->ring = &ring_mode_ops;
-
- if (device_can_wakeup(priv->device)) {
- priv->wolopts = WAKE_MAGIC; /* Magic Frame as default */
- enable_irq_wake(priv->wol_irq);
- }
-
- return 0;
-}
-
static void stmmac_check_ether_addr(struct stmmac_priv *priv)
{
/* verify if the MAC address is valid, in case of failures it
struct stmmac_priv *priv = netdev_priv(dev);
int ret;
- /* MAC HW device setup */
- ret = stmmac_mac_device_setup(dev);
- if (ret < 0)
- return ret;
-
stmmac_check_ether_addr(priv);
- stmmac_verify_args();
-
- /* Override with kernel parameters if supplied XXX CRS XXX
- * this needs to have multiple instances */
- if ((phyaddr >= 0) && (phyaddr <= 31))
- priv->plat->phy_addr = phyaddr;
-
/* MDIO bus Registration */
ret = stmmac_mdio_register(dev);
if (ret < 0) {
goto open_error;
}
- stmmac_get_synopsys_id(priv);
-
- priv->hw_cap_support = stmmac_get_hw_features(priv);
-
- if (priv->hw_cap_support) {
- pr_info(" Support DMA HW capability register");
-
- /* We can override some gmac/dma configuration fields: e.g.
- * enh_desc, tx_coe (e.g. that are passed through the
- * platform) with the values from the HW capability
- * register (if supported).
- */
- priv->plat->enh_desc = priv->dma_cap.enh_desc;
- priv->plat->tx_coe = priv->dma_cap.tx_coe;
- priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
-
- /* By default disable wol on magic frame if not supported */
- if (!priv->dma_cap.pmt_magic_frame)
- priv->wolopts &= ~WAKE_MAGIC;
-
- } else
- pr_info(" No HW DMA feature register supported");
-
- /* Select the enhnaced/normal descriptor structures */
- stmmac_selec_desc_mode(priv);
-
- /* PMT module is not integrated in all the MAC devices. */
- if (priv->plat->pmt) {
- pr_info(" Remote wake-up capable\n");
- device_set_wakeup_capable(priv->device, 1);
- }
-
- priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
- if (priv->rx_coe)
- pr_info(" Checksum Offload Engine supported\n");
- if (priv->plat->tx_coe)
- pr_info(" Checksum insertion supported\n");
-
/* Create and initialize the TX/RX descriptors chains. */
priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
/* Copy the MAC addr into the HW */
priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
+
/* If required, perform hw setup of the bus. */
if (priv->plat->bus_setup)
priv->plat->bus_setup(priv->ioaddr);
+
/* Initialize the MAC Core */
priv->hw->mac->core_init(priv->ioaddr);
- netdev_update_features(dev);
-
/* Request the IRQ lines */
ret = request_irq(dev->irq, stmmac_interrupt,
IRQF_SHARED, dev->name, dev);
goto open_error;
}
+ /* Request the Wake IRQ in case of another line is used for WoL */
+ if (priv->wol_irq != dev->irq) {
+ ret = request_irq(priv->wol_irq, stmmac_interrupt,
+ IRQF_SHARED, dev->name, dev);
+ if (unlikely(ret < 0)) {
+ pr_err("%s: ERROR: allocating the ext WoL IRQ %d "
+ "(error: %d)\n", __func__, priv->wol_irq, ret);
+ goto open_error_wolirq;
+ }
+ }
+
/* Enable the MAC Rx/Tx */
stmmac_set_mac(priv->ioaddr, true);
#ifdef CONFIG_STMMAC_DEBUG_FS
ret = stmmac_init_fs(dev);
if (ret < 0)
- pr_warning("\tFailed debugFS registration");
+ pr_warning("%s: failed debugFS registration\n", __func__);
#endif
/* Start the ball rolling... */
DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
#ifdef CONFIG_STMMAC_TIMER
priv->tm->timer_start(tmrate);
#endif
+
/* Dump DMA/MAC registers */
if (netif_msg_hw(priv)) {
priv->hw->mac->dump_regs(priv->ioaddr);
return 0;
+open_error_wolirq:
+ free_irq(dev->irq, dev);
+
open_error:
#ifdef CONFIG_STMMAC_TIMER
kfree(priv->tm);
/* Free the IRQ lines */
free_irq(dev->irq, dev);
+ if (priv->wol_irq != dev->irq)
+ free_irq(priv->wol_irq, dev);
/* Stop TX/RX DMA and clear the descriptors */
priv->hw->dma->stop_tx(priv->ioaddr);
.ndo_set_mac_address = eth_mac_addr,
};
+/**
+ * stmmac_hw_init - Init the MAC device
+ * @priv : pointer to the private device structure.
+ * Description: this function detects which MAC device
+ * (GMAC/MAC10-100) has to attached, checks the HW capability
+ * (if supported) and sets the driver's features (for example
+ * to use the ring or chaine mode or support the normal/enh
+ * descriptor structure).
+ */
+static int stmmac_hw_init(struct stmmac_priv *priv)
+{
+ int ret = 0;
+ struct mac_device_info *mac;
+
+ /* Identify the MAC HW device */
+ if (priv->plat->has_gmac)
+ mac = dwmac1000_setup(priv->ioaddr);
+ else
+ mac = dwmac100_setup(priv->ioaddr);
+ if (!mac)
+ return -ENOMEM;
+
+ priv->hw = mac;
+
+ /* To use the chained or ring mode */
+ priv->hw->ring = &ring_mode_ops;
+
+ /* Get and dump the chip ID */
+ stmmac_get_synopsys_id(priv);
+
+ /* Get the HW capability (new GMAC newer than 3.50a) */
+ priv->hw_cap_support = stmmac_get_hw_features(priv);
+ if (priv->hw_cap_support) {
+ pr_info(" DMA HW capability register supported");
+
+ /* We can override some gmac/dma configuration fields: e.g.
+ * enh_desc, tx_coe (e.g. that are passed through the
+ * platform) with the values from the HW capability
+ * register (if supported).
+ */
+ priv->plat->enh_desc = priv->dma_cap.enh_desc;
+ priv->plat->tx_coe = priv->dma_cap.tx_coe;
+ priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
+ } else
+ pr_info(" No HW DMA feature register supported");
+
+ /* Select the enhnaced/normal descriptor structures */
+ stmmac_selec_desc_mode(priv);
+
+ priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
+ if (priv->rx_coe)
+ pr_info(" RX Checksum Offload Engine supported\n");
+ if (priv->plat->tx_coe)
+ pr_info(" TX Checksum insertion supported\n");
+
+ if (priv->plat->pmt) {
+ pr_info(" Wake-Up On Lan supported\n");
+ device_set_wakeup_capable(priv->device, 1);
+ }
+
+ return ret;
+}
+
/**
* stmmac_dvr_probe
* @device: device pointer
* call the alloc_etherdev, allocate the priv structure.
*/
struct stmmac_priv *stmmac_dvr_probe(struct device *device,
- struct plat_stmmacenet_data *plat_dat)
+ struct plat_stmmacenet_data *plat_dat,
+ void __iomem *addr)
{
int ret = 0;
struct net_device *ndev = NULL;
ether_setup(ndev);
- ndev->netdev_ops = &stmmac_netdev_ops;
stmmac_set_ethtool_ops(ndev);
+ priv->pause = pause;
+ priv->plat = plat_dat;
+ priv->ioaddr = addr;
+ priv->dev->base_addr = (unsigned long)addr;
+
+ /* Verify driver arguments */
+ stmmac_verify_args();
+
+ /* Override with kernel parameters if supplied XXX CRS XXX
+ * this needs to have multiple instances */
+ if ((phyaddr >= 0) && (phyaddr <= 31))
+ priv->plat->phy_addr = phyaddr;
+
+ /* Init MAC and get the capabilities */
+ stmmac_hw_init(priv);
+
+ ndev->netdev_ops = &stmmac_netdev_ops;
- ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_RXCSUM;
ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
#ifdef STMMAC_VLAN_TAG_USED
if (flow_ctrl)
priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */
- priv->pause = pause;
- priv->plat = plat_dat;
netif_napi_add(ndev, &priv->napi, stmmac_poll, 64);
spin_lock_init(&priv->lock);
ret = register_netdev(ndev);
if (ret) {
- pr_err("%s: ERROR %i registering the device\n",
- __func__, ret);
+ pr_err("%s: ERROR %i registering the device\n", __func__, ret);
goto error;
}
- DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n",
- ndev->name, (ndev->features & NETIF_F_SG) ? "on" : "off",
- (ndev->features & NETIF_F_IP_CSUM) ? "on" : "off");
-
return priv;
error:
stmmac_default_data();
- priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat);
+ priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat, addr);
if (!priv) {
- pr_err("%s: main drivr probe failed", __func__);
+ pr_err("%s: main driver probe failed", __func__);
goto err_out;
}
- priv->ioaddr = addr;
- priv->dev->base_addr = (unsigned long)addr;
priv->dev->irq = pdev->irq;
priv->wol_irq = pdev->irq;
goto out_release_region;
}
plat_dat = pdev->dev.platform_data;
- priv = stmmac_dvr_probe(&(pdev->dev), plat_dat);
+
+ /* Custom initialisation (if needed)*/
+ if (plat_dat->init) {
+ ret = plat_dat->init(pdev);
+ if (unlikely(ret))
+ goto out_unmap;
+ }
+
+ priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
if (!priv) {
- pr_err("%s: main drivr probe failed", __func__);
+ pr_err("%s: main driver probe failed", __func__);
goto out_unmap;
}
- priv->ioaddr = addr;
- /* Set the I/O base addr */
- priv->dev->base_addr = (unsigned long)addr;
-
/* Get the MAC information */
priv->dev->irq = platform_get_irq_byname(pdev, "macirq");
if (priv->dev->irq == -ENXIO) {
platform_set_drvdata(pdev, priv->dev);
- /* Custom initialisation */
- if (priv->plat->init) {
- ret = priv->plat->init(pdev);
- if (unlikely(ret))
- goto out_unmap;
- }
-
pr_debug("STMMAC platform driver registration completed");
return 0;
pdata = pdev->dev.platform_data;
if (external_switch || dumb_switch) {
- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+ strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */
phy_id = pdev->id;
} else {
for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
if (phy_id == PHY_MAX_ADDR) {
dev_err(&pdev->dev, "no PHY present, falling back "
"to switch on MDIO bus 0\n");
- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+ strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */
phy_id = pdev->id;
}
int ret;
/* free and bail if we are shutting down */
- if (unlikely(!netif_running(ndev) || !netif_carrier_ok(ndev))) {
+ if (unlikely(!netif_running(ndev))) {
dev_kfree_skb_any(skb);
return;
}
recycle:
ret = cpdma_chan_submit(priv->rxchan, skb, skb->data,
skb_tailroom(skb), GFP_KERNEL);
- if (WARN_ON(ret < 0))
+
+ WARN_ON(ret == -ENOMEM);
+ if (unlikely(ret < 0))
dev_kfree_skb_any(skb);
}
if (IS_ERR(priv->phydev)) {
dev_err(emac_dev, "could not connect to phy %s\n",
priv->phy_id);
+ ret = PTR_ERR(priv->phydev);
priv->phydev = NULL;
- return PTR_ERR(priv->phydev);
+ return ret;
}
priv->link = 0;
data->clk = clk_get(dev, NULL);
if (IS_ERR(data->clk)) {
- data->clk = NULL;
dev_err(dev, "failed to get device clock\n");
ret = PTR_ERR(data->clk);
+ data->clk = NULL;
goto bail_out;
}
config NET_VENDOR_TOSHIBA
bool "Toshiba devices"
default y
- depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) || PPC_PS3
+ depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB || MIPS) || PPC_PS3
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
if (dev->irq != 0)
free_irq(dev->irq, dev);
- /* Power down the chip */
- pci_set_power_state(vptr->pdev, PCI_D3hot);
-
velocity_free_rings(vptr);
vptr->flags &= (~VELOCITY_FLAGS_OPENED);
__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
udelay(50);
- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
+ snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
+ mdio_bus->id, plat->phy);
port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(port->phydev)) {
struct hv_device *device_obj = net_device_ctx->device_ctx;
int ret;
- netif_stop_queue(net);
+ netif_tx_disable(net);
ret = rndis_filter_close(device_obj);
if (ret != 0)
int ret;
unsigned int i, num_pages, npg_data;
- /* Add multipage for skb->data and additional one for RNDIS */
+ /* Add multipages for skb->data and additional 2 for RNDIS */
npg_data = (((unsigned long)skb->data + skb_headlen(skb) - 1)
>> PAGE_SHIFT) - ((unsigned long)skb->data >> PAGE_SHIFT) + 1;
- num_pages = skb_shinfo(skb)->nr_frags + npg_data + 1;
+ num_pages = skb_shinfo(skb)->nr_frags + npg_data + 2;
/* Allocate a netvsc packet based on # of frags. */
packet = kzalloc(sizeof(struct hv_netvsc_packet) +
sizeof(struct hv_netvsc_packet) +
(num_pages * sizeof(struct hv_page_buffer));
- /* Setup the rndis header */
- packet->page_buf_cnt = num_pages;
+ /* If the rndis msg goes beyond 1 page, we will add 1 later */
+ packet->page_buf_cnt = num_pages - 1;
/* Initialize it from the skb */
packet->total_data_buflen = skb->len;
schedule_delayed_work(&ndev_ctx->dwork, msecs_to_jiffies(20));
} else {
netif_carrier_off(net);
- netif_stop_queue(net);
+ netif_tx_disable(net);
}
}
skb->ip_summed = CHECKSUM_NONE;
net->stats.rx_packets++;
- net->stats.rx_bytes += skb->len;
+ net->stats.rx_bytes += packet->total_data_buflen;
/*
* Pass the skb back up. Network stack will deallocate the skb when it
nvdev->start_remove = true;
cancel_delayed_work_sync(&ndevctx->dwork);
- netif_stop_queue(ndev);
+ netif_tx_disable(ndev);
rndis_filter_device_remove(hdev);
ndev->mtu = mtu;
cancel_delayed_work_sync(&ndev_ctx->dwork);
/* Stop outbound asap */
- netif_stop_queue(net);
+ netif_tx_disable(net);
unregister_netdev(net);
data_offset = RNDIS_HEADER_SIZE + rndis_pkt->data_offset;
pkt->total_data_buflen -= data_offset;
+
+ /*
+ * Make sure we got a valid RNDIS message, now total_data_buflen
+ * should be the data packet size plus the trailer padding size
+ */
+ if (pkt->total_data_buflen < rndis_pkt->data_len) {
+ netdev_err(dev->net_dev->ndev, "rndis message buffer "
+ "overflow detected (got %u, min %u)"
+ "...dropping this message!\n",
+ pkt->total_data_buflen, rndis_pkt->data_len);
+ return;
+ }
+
+ /*
+ * Remove the rndis trailer padding from rndis packet message
+ * rndis_pkt->data_len tell us the real data length, we only copy
+ * the data packet to the stack, without the rndis trailer padding
+ */
+ pkt->total_data_buflen = rndis_pkt->data_len;
pkt->data = (void *)((unsigned long)pkt->data + data_offset);
pkt->is_data_pkt = true;
(unsigned long)rndisMessage & (PAGE_SIZE-1);
pkt->page_buf[0].len = rndisMessageSize;
+ /* Add one page_buf if the rndis msg goes beyond page boundary */
+ if (pkt->page_buf[0].offset + rndisMessageSize > PAGE_SIZE) {
+ int i;
+ for (i = pkt->page_buf_cnt; i > 1; i--)
+ pkt->page_buf[i] = pkt->page_buf[i-1];
+ pkt->page_buf_cnt++;
+ pkt->page_buf[0].len = PAGE_SIZE - pkt->page_buf[0].offset;
+ pkt->page_buf[1].pfn = virt_to_phys((void *)((ulong)
+ rndisMessage + pkt->page_buf[0].len)) >> PAGE_SHIFT;
+ pkt->page_buf[1].offset = 0;
+ pkt->page_buf[1].len = rndisMessageSize - pkt->page_buf[0].len;
+ }
+
/* Save the packet send completion and context */
filterPacket->completion = pkt->completion.send.send_completion;
filterPacket->completion_ctx =
#include <asm/irq.h>
#include <asm/uaccess.h>
-MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IC1001 PHY drivers");
+MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers");
MODULE_AUTHOR("Michael Barkowski");
MODULE_LICENSE("GPL");
-/* IP101A/IP1001 */
-#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */
-#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
-#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */
-#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
-#define IP101A_APS_ON 2 /* IP101A APS Mode bit */
+/* IP101A/G - IP1001 */
+#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */
+#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
+#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */
+#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
+#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */
static int ip175c_config_init(struct phy_device *phydev)
{
static int ip1xx_reset(struct phy_device *phydev)
{
- int err, bmcr;
+ int bmcr;
/* Software Reset PHY */
bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
bmcr |= BMCR_RESET;
- err = phy_write(phydev, MII_BMCR, bmcr);
- if (err < 0)
- return err;
+ bmcr = phy_write(phydev, MII_BMCR, bmcr);
+ if (bmcr < 0)
+ return bmcr;
do {
bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
} while (bmcr & BMCR_RESET);
- return err;
+ return 0;
}
static int ip1001_config_init(struct phy_device *phydev)
/* Enable Auto Power Saving mode */
c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2);
+ if (c < 0)
+ return c;
c |= IP1001_APS_ON;
+ c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c);
if (c < 0)
return c;
/* Additional delay (2ns) used to adjust RX clock phase
* at RGMII interface */
c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
+ if (c < 0)
+ return c;
+
c |= IP1001_PHASE_SEL_MASK;
c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
+ if (c < 0)
+ return c;
}
- return c;
+ return 0;
}
-static int ip101a_config_init(struct phy_device *phydev)
+static int ip101a_g_config_init(struct phy_device *phydev)
{
int c;
/* Enable Auto Power Saving mode */
c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
- c |= IP101A_APS_ON;
+ c |= IP101A_G_APS_ON;
return c;
}
.phy_id_mask = 0x0ffffff0,
.features = PHY_GBIT_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_INTERRUPT,
.config_init = &ip1001_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.driver = { .owner = THIS_MODULE,},
};
-static struct phy_driver ip101a_driver = {
+static struct phy_driver ip101a_g_driver = {
.phy_id = 0x02430c54,
- .name = "ICPlus IP101A",
+ .name = "ICPlus IP101A/G",
.phy_id_mask = 0x0ffffff0,
.features = PHY_BASIC_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause,
- .config_init = &ip101a_config_init,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &ip101a_g_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.suspend = genphy_suspend,
if (ret < 0)
return -ENODEV;
- ret = phy_driver_register(&ip101a_driver);
+ ret = phy_driver_register(&ip101a_g_driver);
if (ret < 0)
return -ENODEV;
static void __exit icplus_exit(void)
{
phy_driver_unregister(&ip1001_driver);
- phy_driver_unregister(&ip101a_driver);
+ phy_driver_unregister(&ip101a_g_driver);
phy_driver_unregister(&ip175c_driver);
}
static struct mdio_device_id __maybe_unused icplus_tbl[] = {
{ 0x02430d80, 0x0ffffff0 },
{ 0x02430d90, 0x0ffffff0 },
+ { 0x02430c54, 0x0ffffff0 },
{ }
};
continue;
}
if (PPP_MP_CB(p)->sequence != seq) {
+ u32 oldseq;
/* Fragment `seq' is missing. If it is after
minseq, it might arrive later, so stop here. */
if (seq_after(seq, minseq))
break;
/* Fragment `seq' is lost, keep going. */
lost = 1;
+ oldseq = seq;
seq = seq_before(minseq, PPP_MP_CB(p)->sequence)?
minseq + 1: PPP_MP_CB(p)->sequence;
+
+ if (ppp->debug & 1)
+ netdev_printk(KERN_DEBUG, ppp->dev,
+ "lost frag %u..%u\n",
+ oldseq, seq-1);
+
goto again;
}
struct sk_buff *tmp2;
skb_queue_reverse_walk_from_safe(list, p, tmp2) {
+ if (ppp->debug & 1)
+ netdev_printk(KERN_DEBUG, ppp->dev,
+ "discarding frag %u\n",
+ PPP_MP_CB(p)->sequence);
__skb_unlink(p, list);
kfree_skb(p);
}
/* If we have discarded any fragments,
signal a receive error. */
if (PPP_MP_CB(head)->sequence != ppp->nextseq) {
+ skb_queue_walk_safe(list, p, tmp) {
+ if (p == head)
+ break;
+ if (ppp->debug & 1)
+ netdev_printk(KERN_DEBUG, ppp->dev,
+ "discarding frag %u\n",
+ PPP_MP_CB(p)->sequence);
+ __skb_unlink(p, list);
+ kfree_skb(p);
+ }
+
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
" missed pkts %u..%u\n",
bool "Token Ring driver support"
depends on NETDEVICES && !UML
depends on (PCI || ISA || MCA || CCW || PCMCIA)
- select LLC
help
Token Ring is IBM's way of communication on a local network; the
rest of the world uses Ethernet. To participate on a Token Ring
if TR
+config WANT_LLC
+ def_bool y
+ select LLC
+
config PCMCIA_IBMTR
tristate "IBM PCMCIA tokenring adapter support"
depends on IBMTR!=y && PCMCIA
.driver_info = 0,
},
+/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
/*
* WHITELIST!!!
*
struct hso_serial *serial = get_serial_by_tty(tty);
struct hso_tiocmget *tiocmget = serial->tiocmget;
- memset(&icount, 0, sizeof(struct serial_icounter_struct));
+ memset(icount, 0, sizeof(struct serial_icounter_struct));
if (!tiocmget)
return -ENOENT;
#define USB_PRODUCT_IPHONE_3GS 0x1294
#define USB_PRODUCT_IPHONE_4 0x1297
#define USB_PRODUCT_IPHONE_4_VZW 0x129c
+#define USB_PRODUCT_IPHONE_4S 0x12a0
#define IPHETH_USBINTF_CLASS 255
#define IPHETH_USBINTF_SUBCLASS 253
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4S,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
{ }
};
MODULE_DEVICE_TABLE(usb, ipheth_table);
.idProduct = 0x9031, /* C-750 C-760 */
ZAURUS_MASTER_INTERFACE,
.driver_info = ZAURUS_PXA_INFO,
+}, {
+ /* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */
+ USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &bogus_mdlm_info,
}, {
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO
| USB_DEVICE_ID_MATCH_DEVICE,
ZAURUS_MASTER_INTERFACE,
.driver_info = OLYMPUS_MXL_INFO,
},
+
+/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &bogus_mdlm_info,
+},
{ }, // END
};
MODULE_DEVICE_TABLE(usb, products);
unregister_netdevice_queue(peer, head);
}
-static const struct nla_policy veth_policy[VETH_INFO_MAX + 1];
+static const struct nla_policy veth_policy[VETH_INFO_MAX + 1] = {
+ [VETH_INFO_PEER] = { .len = sizeof(struct ifinfomsg) },
+};
static struct rtnl_link_ops veth_link_ops = {
.kind = DRV_NAME,
/* for simplicity, don't copy L4 headers */
ctx->l4_hdr_size = 0;
}
- ctx->copy_size = ctx->eth_ip_hdr_size +
- ctx->l4_hdr_size;
+ ctx->copy_size = min(ctx->eth_ip_hdr_size +
+ ctx->l4_hdr_size, skb->len);
} else {
ctx->eth_ip_hdr_size = 0;
ctx->l4_hdr_size = 0;
/*
* Workaround for early ACK timeouts, add an offset to match the
- * initval's 64us ack timeout value.
+ * initval's 64us ack timeout value. Use 48us for the CTS timeout.
* This was initially only meant to work around an issue with delayed
* BA frames in some implementations, but it has been found to fix ACK
* timeout issues in other cases as well.
*/
- if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ)
+ if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ) {
acktimeout += 64 - sifstime - ah->slottime;
+ ctstimeout += 48 - sifstime - ah->slottime;
+ }
+
ath9k_hw_set_sifs_time(ah, sifstime);
ath9k_hw_setslottime(ah, slottime);
ARRAY_SIZE(ath9k_tpt_blink));
#endif
+ INIT_WORK(&sc->hw_reset_work, ath_reset_work);
+ INIT_WORK(&sc->hw_check_work, ath_hw_check);
+ INIT_WORK(&sc->paprd_work, ath_paprd_calibrate);
+ INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work);
+
/* Register with mac80211 */
error = ieee80211_register_hw(hw);
if (error)
goto error_world;
}
- INIT_WORK(&sc->hw_reset_work, ath_reset_work);
- INIT_WORK(&sc->hw_check_work, ath_hw_check);
- INIT_WORK(&sc->paprd_work, ath_paprd_calibrate);
- INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work);
sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
ath_init_leds(sc);
return rate;
/* This should not happen */
- WARN_ON(1);
+ WARN_ON_ONCE(1);
rate = ath_rc_priv->valid_rate_index[0];
fc = hdr->frame_control;
for (i = 0; i < sc->hw->max_rates; i++) {
struct ieee80211_tx_rate *rate = &tx_info->status.rates[i];
- if (!rate->count)
+ if (rate->idx < 0 || !rate->count)
break;
final_ts_idx = i;
(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
ATH9K_RXERR_KEYMISS));
+ /*
+ * Key miss events are only relevant for pairwise keys where the
+ * descriptor does contain a valid key index. This has been observed
+ * mostly with CCMP encryption.
+ */
+ if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID)
+ rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
+
if (!rx_stats->rs_datalen)
return false;
/*
tx_cmd->tid_tspec = qc[0] & 0xf;
tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
} else {
+ tx_cmd->tid_tspec = IWL_TID_NON_QOS;
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
else
sta_priv->lq_sta.lq.agg_params.agg_frame_cnt_limit =
sta_priv->max_agg_bufsize;
- IWL_INFO(priv, "Tx aggregation enabled on ra = %pM tid = %d\n",
+ IWL_DEBUG_HT(priv, "Tx aggregation enabled on ra = %pM tid = %d\n",
sta->addr, tid);
return iwl_send_lq_cmd(priv, ctx,
u32 status = le16_to_cpu(tx_resp->status.status);
int i;
+ WARN_ON(tid == IWL_TID_NON_QOS);
+
if (agg->wait_for_ba)
IWL_DEBUG_TX_REPLY(priv,
"got tx response w/o block-ack\n");
}
__skb_queue_head_init(&skbs);
- priv->tid_data[sta_id][tid].next_reclaimed = next_reclaimed;
- IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d",
- next_reclaimed);
+ if (tid != IWL_TID_NON_QOS) {
+ priv->tid_data[sta_id][tid].next_reclaimed =
+ next_reclaimed;
+ IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d",
+ next_reclaimed);
+ }
/*we can free until ssn % q.n_bd not inclusive */
WARN_ON(iwl_trans_reclaim(trans(priv), sta_id, tid, txq_id,
#define IWL_INVALID_STATION 255
#define IWL_MAX_TID_COUNT 8
+#define IWL_TID_NON_QOS IWL_MAX_TID_COUNT
#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2)
#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8)
txq->time_stamp = jiffies;
if (unlikely(txq_id >= IWLAGN_FIRST_AMPDU_QUEUE &&
+ tid != IWL_TID_NON_QOS &&
txq_id != trans_pcie->agg_txq[sta_id][tid])) {
/*
* FIXME: this is a uCode bug which need to be addressed,
ret = mwifiex_set_rf_channel(priv, channel,
priv->adapter->channel_type);
- ret = mwifiex_set_encode(priv, NULL, 0, 0, 1); /* Disable keys */
+ /* As this is new association, clear locally stored
+ * keys and security related flags */
+ priv->sec_info.wpa_enabled = false;
+ priv->sec_info.wpa2_enabled = false;
+ priv->wep_key_curr_index = 0;
+ ret = mwifiex_set_encode(priv, NULL, 0, 0, 1);
if (mode == NL80211_IFTYPE_ADHOC) {
/* "privacy" is set only for ad-hoc mode */
dev_dbg(priv->adapter->dev,
"info: setting wep encryption"
" with key len %d\n", sme->key_len);
+ priv->wep_key_curr_index = sme->key_idx;
ret = mwifiex_set_encode(priv, sme->key, sme->key_len,
sme->key_idx, 0);
}
adapter->if_ops.cleanup_if(adapter);
- dev_kfree_skb_any(adapter->sleep_cfm);
+ if (adapter->sleep_cfm)
+ dev_kfree_skb_any(adapter->sleep_cfm);
}
/*
continue;
rtnl_lock();
- mwifiex_del_virtual_intf(priv->wdev->wiphy, priv->netdev);
+ if (priv->wdev && priv->netdev)
+ mwifiex_del_virtual_intf(priv->wdev->wiphy,
+ priv->netdev);
rtnl_unlock();
}
if (!priv)
goto exit_remove;
- wiphy_unregister(priv->wdev->wiphy);
- wiphy_free(priv->wdev->wiphy);
- kfree(priv->wdev);
+ if (priv->wdev) {
+ wiphy_unregister(priv->wdev->wiphy);
+ wiphy_free(priv->wdev->wiphy);
+ kfree(priv->wdev);
+ }
mwifiex_terminate_workqueue(adapter);
int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter)
{
bool cancel_flag = false;
- int status = adapter->cmd_wait_q.status;
+ int status;
struct cmd_ctrl_node *cmd_queued;
if (!adapter->cmd_queued)
mwifiex_cancel_pending_ioctl(adapter);
dev_dbg(adapter->dev, "cmd cancel\n");
}
+
+ status = adapter->cmd_wait_q.status;
adapter->cmd_wait_q.status = 0;
return status;
if (!netif_queue_stopped(priv->netdev))
mwifiex_stop_net_dev_queue(priv->netdev, adapter);
+ if (netif_carrier_ok(priv->netdev))
+ netif_carrier_off(priv->netdev);
/* Clear any past association response stored for
* application retrieval */
if (!netif_queue_stopped(priv->netdev))
mwifiex_stop_net_dev_queue(priv->netdev, adapter);
+ if (netif_carrier_ok(priv->netdev))
+ netif_carrier_off(priv->netdev);
if (!ret) {
dev_dbg(adapter->dev, "info: network found in scan"
static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, u32 rxwi_w2)
{
- int rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0);
- int rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1);
- int rssi2 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI2);
+ s8 rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0);
+ s8 rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1);
+ s8 rssi2 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI2);
u16 eeprom;
u8 offset0;
u8 offset1;
* which gives less energy...
*/
rssi0 = max(rssi0, rssi1);
- return max(rssi0, rssi2);
+ return (int)max(rssi0, rssi2);
}
void rt2800_process_rxwi(struct queue_entry *entry,
return err;
}
- return 1;
+ return 0;
}
static int rtl_pci_start(struct ieee80211_hw *hw)
}
/* Init PCI sw */
- err = !rtl_pci_init(hw, pdev);
+ err = rtl_pci_init(hw, pdev);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("Failed to init PCI.\n"));
ZD_ASSERT(frag_len <= 0xffff);
+ /*
+ * Firmware computes the duration itself (for all frames except PSPoll)
+ * and needs the field set to 0 at input, otherwise firmware messes up
+ * duration_id and sets bits 14 and 15 on.
+ */
+ if (!ieee80211_is_pspoll(hdr->frame_control))
+ hdr->duration_id = 0;
+
txrate = ieee80211_get_tx_rate(mac->hw, info);
cs->modulation = txrate->hw_value;
+#include <linux/prefetch.h>
+
/**
* iommu_fill_pdir - Insert coalesced scatter/gather chunks into the I/O Pdir.
* @ioc: The I/O Controller.
return rc;
}
- pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz);
-
iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
pci_cfg_access_lock(dev);
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
return -EIO;
pgsz &= ~(pgsz - 1);
+ pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz);
nres = 0;
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
secondary, subordinate, pass);
+ if (!primary && (primary != bus->number) && secondary && subordinate) {
+ dev_warn(&dev->dev, "Primary bus is hard wired to 0\n");
+ primary = bus->number;
+ }
+
/* Check if setup is sensible at all */
if (!pass &&
(primary != bus->number || secondary <= bus->number)) {
}
EXPORT_SYMBOL(pci_remove_bus);
+static void __pci_remove_behind_bridge(struct pci_dev *dev);
/**
* pci_remove_bus_device - remove a PCI device and any children
* @dev: the device to remove
if (dev->subordinate) {
struct pci_bus *b = dev->subordinate;
- pci_remove_behind_bridge(dev);
+ __pci_remove_behind_bridge(dev);
pci_remove_bus(b);
dev->subordinate = NULL;
}
__pci_remove_bus_device(dev);
}
+static void __pci_remove_behind_bridge(struct pci_dev *dev)
+{
+ struct list_head *l, *n;
+
+ if (dev->subordinate)
+ list_for_each_safe(l, n, &dev->subordinate->devices)
+ __pci_remove_bus_device(pci_dev_b(l));
+}
+
+static void pci_stop_behind_bridge(struct pci_dev *dev)
+{
+ struct list_head *l, *n;
+
+ if (dev->subordinate)
+ list_for_each_safe(l, n, &dev->subordinate->devices)
+ pci_stop_bus_device(pci_dev_b(l));
+}
+
/**
* pci_remove_behind_bridge - remove all devices behind a PCI bridge
* @dev: PCI bridge device
*/
void pci_remove_behind_bridge(struct pci_dev *dev)
{
- struct list_head *l, *n;
-
- if (dev->subordinate)
- list_for_each_safe(l, n, &dev->subordinate->devices)
- __pci_remove_bus_device(pci_dev_b(l));
+ pci_stop_behind_bridge(dev);
+ __pci_remove_behind_bridge(dev);
}
static void pci_stop_bus_devices(struct pci_bus *bus)
if (verbose_request)
dev_info(&pdev->xdev->dev,
- "read dev=%04x:%02x:%02x.%01x - offset %x size %d\n",
+ "read dev=%04x:%02x:%02x.%d - offset %x size %d\n",
pci_domain_nr(bus), bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn), where, size);
if (verbose_request)
dev_info(&pdev->xdev->dev,
- "write dev=%04x:%02x:%02x.%01x - "
+ "write dev=%04x:%02x:%02x.%d - "
"offset %x size %d val %x\n",
pci_domain_nr(bus), bus->number,
PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
d = pci_scan_single_device(b, devfn);
if (d)
dev_info(&pdev->xdev->dev, "New device on "
- "%04x:%02x:%02x.%02x found.\n", domain, bus,
+ "%04x:%02x:%02x.%d found.\n", domain, bus,
PCI_SLOT(devfn), PCI_FUNC(devfn));
}
pci_dev = pci_get_slot(pci_bus, PCI_DEVFN(slot, func));
if (!pci_dev) {
dev_dbg(&pdev->xdev->dev,
- "Cannot get PCI device %04x:%02x:%02x.%02x\n",
+ "Cannot get PCI device %04x:%02x:%02x.%d\n",
domain, bus, slot, func);
continue;
}
pci_dev_put(pci_dev);
dev_dbg(&pdev->xdev->dev,
- "PCI device %04x:%02x:%02x.%02x removed.\n",
+ "PCI device %04x:%02x:%02x.%d removed.\n",
domain, bus, slot, func);
}
static int pcmcia_bus_early_resume(struct pcmcia_socket *skt)
{
- if (!verify_cis_cache(skt)) {
- pcmcia_put_socket(skt);
+ if (!verify_cis_cache(skt))
return 0;
- }
dev_dbg(&skt->dev, "cis mismatch - different card\n");
goto err1;
}
- if (ret) {
- while (--i >= 0)
- soc_pcmcia_remove_one(&sinfo->skt[i]);
- kfree(sinfo);
- clk_put(clk);
- } else {
- pxa2xx_configure_sockets(&dev->dev);
- dev_set_drvdata(&dev->dev, sinfo);
- }
+ pxa2xx_configure_sockets(&dev->dev);
+ dev_set_drvdata(&dev->dev, sinfo);
return 0;
err1:
while (--i >= 0)
soc_pcmcia_remove_one(&sinfo->skt[i]);
+ clk_put(clk);
kfree(sinfo);
err0:
return ret;
pindesc->pctldev = pctldev;
/* Copy basic pin info */
- if (pindesc->name) {
+ if (name) {
pindesc->name = name;
} else {
pindesc->name = kasprintf(GFP_KERNEL, "PIN%u", number);
#include <linux/mutex.h>
#include <asm/bios_ebda.h>
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
static u8 rtl_cmd_type;
static u8 rtl_cmd_width;
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-#endif
-
static void __iomem *rtl_port_map(phys_addr_t addr, unsigned long len)
{
if (rtl_cmd_type == RTL_ADDR_TYPE_MMIO)
#include <asm/processor.h>
#include "intel_ips.h"
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
#define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32
/*
static bool
ips_gpu_turbo_enabled(struct ips_driver *ips);
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-#endif
-
/**
* ips_cpu_busy - is CPU busy?
* @ips: IPS driver struct
#define BQ27500_REG_SOC 0x2C
#define BQ27500_REG_DCAP 0x3C /* Design capacity */
-#define BQ27500_FLAG_DSG BIT(0) /* Discharging */
+#define BQ27500_FLAG_DSC BIT(0)
#define BQ27500_FLAG_SOCF BIT(1) /* State-of-Charge threshold final */
#define BQ27500_FLAG_SOC1 BIT(2) /* State-of-Charge threshold 1 */
-#define BQ27500_FLAG_CHG BIT(8) /* Charging */
-#define BQ27500_FLAG_FC BIT(9) /* Fully charged */
+#define BQ27500_FLAG_FC BIT(9)
#define BQ27000_RS 20 /* Resistor sense */
struct bq27x00_reg_cache cache = {0, };
bool is_bq27500 = di->chip == BQ27500;
- cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, is_bq27500);
+ cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, !is_bq27500);
if (cache.flags >= 0) {
if (!is_bq27500 && (cache.flags & BQ27000_FLAG_CI)) {
dev_info(di->dev, "battery is not calibrated! ignoring capacity values\n");
if (di->chip == BQ27500) {
if (di->cache.flags & BQ27500_FLAG_FC)
status = POWER_SUPPLY_STATUS_FULL;
- else if (di->cache.flags & BQ27500_FLAG_DSG)
+ else if (di->cache.flags & BQ27500_FLAG_DSC)
status = POWER_SUPPLY_STATUS_DISCHARGING;
- else if (di->cache.flags & BQ27500_FLAG_CHG)
- status = POWER_SUPPLY_STATUS_CHARGING;
- else if (power_supply_am_i_supplied(&di->bat))
- status = POWER_SUPPLY_STATUS_NOT_CHARGING;
else
- status = POWER_SUPPLY_STATUS_UNKNOWN;
+ status = POWER_SUPPLY_STATUS_CHARGING;
} else {
if (di->cache.flags & BQ27000_FLAG_FC)
status = POWER_SUPPLY_STATUS_FULL;
return 0;
}
-const struct platform_device_id charger_manager_id[] = {
+static const struct platform_device_id charger_manager_id[] = {
{ "charger-manager", 0 },
{ },
};
+MODULE_DEVICE_TABLE(platform, charger_manager_id);
static int cm_suspend_prepare(struct device *dev)
{
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
MODULE_DESCRIPTION("Charger Manager");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("charger-manager");
static const struct i2c_device_id lp8727_ids[] = {
{"lp8727", 0},
+ { }
};
static struct i2c_driver lp8727_driver = {
};
static const unsigned int LDO13_table[] = {
- 1300000, 1800000, 2000000, 2500000, 2800000, 3000000, 0, 0,
+ 1200000, 1300000, 1800000, 2000000, 2500000, 2800000, 3000000, 0,
};
static const unsigned int LDO13_suspend_table[] = {
PM8607_LDO( 7, LDO7, 0, 3, SUPPLIES_EN12, 1),
PM8607_LDO( 8, LDO8, 0, 3, SUPPLIES_EN12, 2),
PM8607_LDO( 9, LDO9, 0, 3, SUPPLIES_EN12, 3),
- PM8607_LDO(10, LDO10, 0, 3, SUPPLIES_EN12, 4),
+ PM8607_LDO(10, LDO10, 0, 4, SUPPLIES_EN12, 4),
PM8607_LDO(12, LDO12, 0, 4, SUPPLIES_EN12, 5),
PM8607_LDO(13, VIBRATOR_SET, 1, 3, VIBRATOR_SET, 0),
- PM8607_LDO(14, LDO14, 0, 4, SUPPLIES_EN12, 6),
+ PM8607_LDO(14, LDO14, 0, 3, SUPPLIES_EN12, 6),
};
static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
if (ret != 0)
return ret;
val &= MAX8649_VOL_MASK;
- voltage = max8649_list_voltage(rdev, (unsigned char)ret); /* uV */
+ voltage = max8649_list_voltage(rdev, (unsigned char)val); /* uV */
/* get rate */
ret = regmap_read(info->regmap, MAX8649_RAMP, &val);
return num;
}
+EXPORT_SYMBOL_GPL(mc13xxx_get_num_regulators_dt);
struct mc13xxx_regulator_init_data * __devinit mc13xxx_parse_regulators_dt(
struct platform_device *pdev, struct mc13xxx_regulator *regulators,
return data;
}
+EXPORT_SYMBOL_GPL(mc13xxx_parse_regulators_dt);
#endif
MODULE_LICENSE("GPL v2");
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, rtc);
- rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
- rtc->rtt += r->start;
+ rtc->rtt = ioremap(r->start, resource_size(r));
+ if (!rtc->rtt) {
+ dev_err(&pdev->dev, "failed to map registers, aborting.\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
mr = rtt_readl(rtc, MR);
&at91_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtcdev)) {
ret = PTR_ERR(rtc->rtcdev);
- goto fail;
+ goto fail_register;
}
/* register irq handler after we know what name we'll use */
return 0;
+fail_register:
+ iounmap(rtc->rtt);
fail:
platform_set_drvdata(pdev, NULL);
kfree(rtc);
rtc_device_unregister(rtc->rtcdev);
+ iounmap(rtc->rtt);
platform_set_drvdata(pdev, NULL);
kfree(rtc);
return 0;
#include <linux/hdreg.h> /* HDIO_GETGEO */
#include <linux/bio.h>
#include <linux/module.h>
+#include <linux/compat.h>
#include <linux/init.h>
#include <asm/debug.h>
#include <asm/idals.h>
#include <asm/ebcdic.h>
-#include <asm/compat.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/cio.h>
#define KMSG_COMPONENT "dasd"
#include <linux/interrupt.h>
+#include <linux/compat.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/blkpg.h>
struct tty_struct *tty; /* pointer to tty structure if present */
struct raw3215_req *queued_read; /* pointer to queued read requests */
struct raw3215_req *queued_write;/* pointer to queued write requests */
+ struct tasklet_struct tlet; /* tasklet to invoke tty_wakeup */
wait_queue_head_t empty_wait; /* wait queue for flushing */
struct timer_list timer; /* timer for delayed output */
int line_pos; /* position on the line (for tabs) */
}
}
+/*
+ * Call tty_wakeup from tasklet context
+ */
+static void raw3215_wakeup(unsigned long data)
+{
+ struct raw3215_info *raw = (struct raw3215_info *) data;
+ tty_wakeup(raw->tty);
+}
+
/*
* Try to start the next IO and wake up processes waiting on the tty.
*/
static void raw3215_next_io(struct raw3215_info *raw)
{
- struct tty_struct *tty;
-
raw3215_mk_write_req(raw);
raw3215_try_io(raw);
- tty = raw->tty;
- if (tty != NULL &&
- RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) {
- tty_wakeup(tty);
- }
+ if (raw->tty && RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE)
+ tasklet_schedule(&raw->tlet);
}
/*
return -ENOMEM;
}
init_waitqueue_head(&raw->empty_wait);
+ tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw);
dev_set_drvdata(&cdev->dev, raw);
cdev->handler = raw3215_irq;
raw->flags |= RAW3215_FIXED;
init_waitqueue_head(&raw->empty_wait);
+ tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw);
/* Request the console irq */
if (raw3215_startup(raw) != 0) {
tty->closing = 1;
/* Shutdown the terminal */
raw3215_shutdown(raw);
+ tasklet_kill(&raw->tlet);
tty->closing = 0;
raw->tty = NULL;
}
#include <linux/console.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/compat.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/init.h>
+#include <linux/compat.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/slab.h>
*/
#include <linux/slab.h>
+#include <linux/compat.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+#include <linux/compat.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
struct rdac_controller *ctlr;
ctlr = container_of(kref, struct rdac_controller, kref);
- flush_workqueue(kmpath_rdacd);
- spin_lock(&list_lock);
list_del(&ctlr->node);
- spin_unlock(&list_lock);
kfree(ctlr);
}
{
struct rdac_controller *ctlr, *tmp;
- spin_lock(&list_lock);
-
list_for_each_entry(tmp, &ctlr_list, node) {
if ((memcmp(tmp->array_id, array_id, UNIQUE_ID_LEN) == 0) &&
(tmp->index == index) &&
(tmp->host == sdev->host)) {
kref_get(&tmp->kref);
- spin_unlock(&list_lock);
return tmp;
}
}
ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC);
if (!ctlr)
- goto done;
+ return NULL;
/* initialize fields of controller */
memcpy(ctlr->array_id, array_id, UNIQUE_ID_LEN);
INIT_WORK(&ctlr->ms_work, send_mode_select);
INIT_LIST_HEAD(&ctlr->ms_head);
list_add(&ctlr->node, &ctlr_list);
-done:
- spin_unlock(&list_lock);
+
return ctlr;
}
index = 0;
else
index = 1;
+
+ spin_lock(&list_lock);
h->ctlr = get_controller(index, array_name, array_id, sdev);
if (!h->ctlr)
err = SCSI_DH_RES_TEMP_UNAVAIL;
+ spin_unlock(&list_lock);
}
return err;
}
return 0;
clean_ctlr:
+ spin_lock(&list_lock);
kref_put(&h->ctlr->kref, release_controller);
+ spin_unlock(&list_lock);
failed:
kfree(scsi_dh_data);
struct rdac_dh_data *h;
unsigned long flags;
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
scsi_dh_data = sdev->scsi_dh_data;
+ h = (struct rdac_dh_data *) scsi_dh_data->buf;
+ if (h->ctlr && h->ctlr->ms_queued)
+ flush_workqueue(kmpath_rdacd);
+
+ spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
sdev->scsi_dh_data = NULL;
spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
- h = (struct rdac_dh_data *) scsi_dh_data->buf;
+ spin_lock(&list_lock);
if (h->ctlr)
kref_put(&h->ctlr->kref, release_controller);
+ spin_unlock(&list_lock);
kfree(scsi_dh_data);
module_put(THIS_MODULE);
sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", RDAC_NAME);
ENTER;
ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
- dev_err(&ioa_cfg->pdev->dev,
- "Adapter being reset as a result of error recovery.\n");
+ if (!ioa_cfg->in_reset_reload) {
+ dev_err(&ioa_cfg->pdev->dev,
+ "Adapter being reset as a result of error recovery.\n");
- if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
- ioa_cfg->sdt_state = GET_DUMP;
+ if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
+ ioa_cfg->sdt_state = GET_DUMP;
+ }
rc = ipr_reset_reload(ioa_cfg, IPR_SHUTDOWN_ABBREV);
struct ipr_ioa_cfg *ioa_cfg;
struct ipr_resource_entry *res;
struct ipr_cmd_pkt *cmd_pkt;
- u32 ioasc;
+ u32 ioasc, int_reg;
int op_found = 0;
ENTER;
*/
if (ioa_cfg->in_reset_reload || ioa_cfg->ioa_is_dead)
return FAILED;
- if (!res || !ipr_is_gscsi(res))
+ if (!res)
+ return FAILED;
+
+ /*
+ * If we are aborting a timed out op, chances are that the timeout was caused
+ * by a still not detected EEH error. In such cases, reading a register will
+ * trigger the EEH recovery infrastructure.
+ */
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
+
+ if (!ipr_is_gscsi(res))
return FAILED;
list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
if (state == SCIC_RESET ||
state == SCIC_INITIALIZING ||
state == SCIC_INITIALIZED) {
+ u8 oem_version = pci_info->orom ? pci_info->orom->hdr.version :
+ ISCI_ROM_VER_1_0;
if (sci_oem_parameters_validate(&ihost->oem_parameters,
- pci_info->orom->hdr.version))
+ oem_version))
return SCI_FAILURE_INVALID_PARAMETER_VALUE;
return SCI_SUCCESS;
printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n",
ioc->name, __func__);
r = 0;
- goto out;
+ goto out_unlocked;
}
if (mpt2sas_fwfault_debug)
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
mutex_unlock(&ioc->reset_in_progress_mutex);
+ out_unlocked:
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
__func__));
return r;
#ifndef SCSI_OSD_MAJOR
# define SCSI_OSD_MAJOR 260
#endif
-#define SCSI_OSD_MAX_MINOR 64
+#define SCSI_OSD_MAX_MINOR MINORMASK
static const char osd_name[] = "osd";
-static const char *osd_version_string = "open-osd 0.2.0";
+static const char *osd_version_string = "open-osd 0.2.1";
MODULE_AUTHOR("Boaz Harrosh <bharrosh@panasas.com>");
MODULE_DESCRIPTION("open-osd Upper-Layer-Driver osd.ko");
vha->device_flags & DFLG_NO_CABLE)
len = snprintf(buf, PAGE_SIZE, "Link Down\n");
else if (atomic_read(&vha->loop_state) != LOOP_READY ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+ qla2x00_reset_active(vha))
len = snprintf(buf, PAGE_SIZE, "Unknown Link State\n");
else {
len = snprintf(buf, PAGE_SIZE, "Link Up - ");
return snprintf(buf, PAGE_SIZE, "\n");
temp = frac = 0;
- if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+ if (qla2x00_reset_active(vha))
ql_log(ql_log_warn, vha, 0x707b,
"ISP reset active.\n");
else if (!vha->hw->flags.eeh_busy)
int rval = QLA_FUNCTION_FAILED;
uint16_t state[5];
- if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+ if (qla2x00_reset_active(vha))
ql_log(ql_log_warn, vha, 0x707c,
"ISP reset active.\n");
else if (!vha->hw->flags.eeh_busy)
if (IS_FWI2_CAPABLE(ha)) {
rval = qla24xx_get_isp_stats(base_vha, stats, stats_dma);
} else if (atomic_read(&base_vha->loop_state) == LOOP_READY &&
- !test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) &&
- !test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
- !ha->dpc_active) {
+ !qla2x00_reset_active(vha) && !ha->dpc_active) {
/* Must be in a 'READY' state for statistics retrieval. */
rval = qla2x00_get_link_status(base_vha, base_vha->loop_id,
stats, stats_dma);
goto exit_fcp_prio_cfg;
}
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ret = -EBUSY;
- goto exit_fcp_prio_cfg;
- }
-
/* Get the sub command */
oper = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
dma_addr_t rsp_data_dma;
uint32_t rsp_data_len;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ql_log(ql_log_warn, vha, 0x7018, "Abort active or needed.\n");
- return -EBUSY;
- }
-
if (!vha->flags.online) {
ql_log(ql_log_warn, vha, 0x7019, "Host is not online.\n");
return -EIO;
int rval = 0;
uint32_t flag;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ql_log(ql_log_warn, vha, 0x702e, "Abort active or needed.\n");
- return -EBUSY;
- }
-
if (!IS_QLA84XX(ha)) {
ql_dbg(ql_dbg_user, vha, 0x702f, "Not 84xx, exiting.\n");
return -EINVAL;
uint32_t flag;
uint32_t fw_ver;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags))
- return -EBUSY;
-
if (!IS_QLA84XX(ha)) {
ql_dbg(ql_dbg_user, vha, 0x7032,
"Not 84xx, exiting.\n");
uint32_t data_len = 0;
uint32_t dma_direction = DMA_NONE;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ql_log(ql_log_warn, vha, 0x7039,
- "Abort active or needed.\n");
- return -EBUSY;
- }
-
if (!IS_QLA84XX(ha)) {
ql_log(ql_log_warn, vha, 0x703a,
"Not 84xx, exiting.\n");
bsg_job->reply->reply_payload_rcv_len = 0;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ql_log(ql_log_warn, vha, 0x7045, "abort active or needed.\n");
- return -EBUSY;
- }
-
if (!IS_IIDMA_CAPABLE(vha->hw)) {
ql_log(ql_log_info, vha, 0x7046, "iiDMA not supported.\n");
return -EINVAL;
vha = shost_priv(host);
}
+ if (qla2x00_reset_active(vha)) {
+ ql_dbg(ql_dbg_user, vha, 0x709f,
+ "BSG: ISP abort active/needed -- cmd=%d.\n",
+ bsg_job->request->msgcode);
+ bsg_job->reply->result = (DID_ERROR << 16);
+ bsg_job->job_done(bsg_job);
+ return -EBUSY;
+ }
+
ql_dbg(ql_dbg_user, vha, 0x7000,
"Entered %s msgcode=0x%x.\n", __func__, bsg_job->request->msgcode);
* | DPC Thread | 0x401c | |
* | Async Events | 0x5057 | 0x5052 |
* | Timer Routines | 0x6011 | 0x600e,0x600f |
- * | User Space Interactions | 0x709e | |
+ * | User Space Interactions | 0x709e | 0x7018,0x702e |
+ * | | | 0x7039,0x7045 |
* | Task Management | 0x803c | 0x8025-0x8026 |
* | | | 0x800b,0x8039 |
* | AER/EEH | 0x900f | |
* ISP2100 HBAs.
*/
#define MAILBOX_REGISTER_COUNT_2100 8
+#define MAILBOX_REGISTER_COUNT_2200 24
#define MAILBOX_REGISTER_COUNT 32
#define QLA2200A_RISC_ROM_VER 4
}
return 0;
}
+
+static inline int
+qla2x00_reset_active(scsi_qla_host_t *vha)
+{
+ scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev);
+
+ /* Test appropriate base-vha and vha flags. */
+ return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) ||
+ test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
+ test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
+ test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
+ test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
+}
break;
case CT_IOCB_TYPE:
qla24xx_els_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE);
- clear_bit(MBX_INTERRUPT, &vha->hw->mbx_cmd_flags);
break;
case ELS_IOCB_TYPE:
qla24xx_els_ct_entry(vha, rsp->req, pkt, ELS_IOCB_TYPE);
set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ /* Allow next mbx cmd to come in. */
+ complete(&ha->mbx_cmd_comp);
if (ha->isp_ops->abort_isp(vha)) {
/* Failed. retry later. */
set_bit(ISP_ABORT_NEEDED,
clear_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
ql_dbg(ql_dbg_mbx, base_vha, 0x101f,
"Finished abort_isp.\n");
+ goto mbx_done;
}
}
}
/* Allow next mbx cmd to come in. */
complete(&ha->mbx_cmd_comp);
+mbx_done:
if (rval) {
ql_dbg(ql_dbg_mbx, base_vha, 0x1020,
"**** Failed mbx[0]=%x, mb[1]=%x, mb[2]=%x, cmd=%x ****.\n",
ql_dbg(ql_dbg_mbx, vha, 0x10a1, "Entered %s.\n", __func__);
mcp->mb[0] = MBC_STOP_FIRMWARE;
- mcp->out_mb = MBX_0;
+ mcp->mb[1] = 0;
+ mcp->out_mb = MBX_1|MBX_0;
mcp->in_mb = MBX_0;
mcp->tov = 5;
mcp->flags = 0;
qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff);
else
qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff);
-
- /* reset ms */
- val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
- val |= (1 << 1);
- qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
- msleep(20);
-
- /* unreset ms */
- val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
- val &= ~(1 << 1);
- qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
- msleep(20);
-
qla82xx_rom_unlock(ha);
/* Read the signature value from the flash.
QLA82XX_CRB_PEG_NET_3 + 0x3c),
qla82xx_rd_32(ha,
QLA82XX_CRB_PEG_NET_4 + 0x3c));
- if (LSW(MSB(halt_status)) == 0x67)
+ if (((halt_status & 0x1fffff00) >> 8) == 0x67)
ql_log(ql_log_warn, vha, 0xb052,
"Firmware aborted with "
"error code 0x00006700. Device is "
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
}
+
+ if (!fcport) {
+ cmd->result = DID_NO_CONNECT << 16;
+ goto qc24_fail_command;
+ }
+
if (atomic_read(&fcport->state) != FCS_ONLINE) {
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (ha->isp_ops->abort_command(sp)) {
+ ret = FAILED;
ql_dbg(ql_dbg_taskm, vha, 0x8003,
"Abort command mbx failed cmd=%p.\n", cmd);
} else {
qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
- fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
struct qla_hw_data *ha = vha->hw;
int ret = FAILED;
unsigned int id, lun;
id = cmd->device->id;
lun = cmd->device->lun;
- if (!fcport) {
- return ret;
- }
-
- ret = fc_block_scsi_eh(cmd);
- if (ret != 0)
- return ret;
- ret = FAILED;
-
ql_log(ql_log_info, vha, 0x8018,
"ADAPTER RESET ISSUED nexus=%ld:%d:%d.\n", vha->host_no, id, lun);
ha->nvram_data_off = ~0;
ha->isp_ops = &qla2100_isp_ops;
} else if (IS_QLA2200(ha)) {
- ha->mbx_count = MAILBOX_REGISTER_COUNT;
+ ha->mbx_count = MAILBOX_REGISTER_COUNT_2200;
req_length = REQUEST_ENTRY_CNT_2200;
rsp_length = RESPONSE_ENTRY_CNT_2100;
ha->max_loop_id = SNS_LAST_LOOP_ID_2100;
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.07.12-k"
+#define QLA2XXX_VERSION "8.03.07.13-k"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
#include "ql4_def.h"
#include "ql4_glbl.h"
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
#define MASK(n) DMA_BIT_MASK(n)
#define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | ((addr >> 25) & 0x3ff))
#define OCM_WIN(addr) (((addr & 0x1ff0000) >> 1) | ((addr >> 25) & 0x3ff))
return 0;
}
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-#endif
-
-#ifndef writeq
-static inline void writeq(__u64 val, volatile void __iomem *addr)
-{
- writel(val, addr);
- writel(val >> 32, addr+4);
-}
-#endif
-
static int qla4_8xxx_pci_mem_read_direct(struct scsi_qla_host *ha,
u64 off, void *data, int size)
{
#include <linux/pm_runtime.h>
#include <linux/export.h>
+#include <linux/async.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
return err;
}
+static int scsi_bus_prepare(struct device *dev)
+{
+ if (scsi_is_sdev_device(dev)) {
+ /* sd probing uses async_schedule. Wait until it finishes. */
+ async_synchronize_full();
+
+ } else if (scsi_is_host_device(dev)) {
+ /* Wait until async scanning is finished */
+ scsi_complete_async_scans();
+ }
+ return 0;
+}
+
static int scsi_bus_suspend(struct device *dev)
{
return scsi_bus_suspend_common(dev, PMSG_SUSPEND);
#else /* CONFIG_PM_SLEEP */
#define scsi_bus_resume_common NULL
+#define scsi_bus_prepare NULL
#define scsi_bus_suspend NULL
#define scsi_bus_freeze NULL
#define scsi_bus_poweroff NULL
#endif /* CONFIG_PM_RUNTIME */
const struct dev_pm_ops scsi_bus_pm_ops = {
+ .prepare = scsi_bus_prepare,
.suspend = scsi_bus_suspend,
.resume = scsi_bus_resume_common,
.freeze = scsi_bus_freeze,
#endif /* CONFIG_PROC_FS */
/* scsi_scan.c */
+extern int scsi_complete_async_scans(void);
extern int scsi_scan_host_selected(struct Scsi_Host *, unsigned int,
unsigned int, unsigned int, int);
extern void scsi_forget_host(struct Scsi_Host *);
}
spin_unlock(&async_scan_lock);
+ scsi_autopm_put_host(shost);
scsi_host_put(shost);
kfree(data);
}
do_scsi_scan_host(shost);
scsi_finish_async_scan(data);
- scsi_autopm_put_host(shost);
return 0;
}
p = kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no);
if (IS_ERR(p))
do_scan_async(data);
- /* scsi_autopm_put_host(shost) is called in do_scan_async() */
+ /* scsi_autopm_put_host(shost) is called in scsi_finish_async_scan() */
}
EXPORT_SYMBOL(scsi_scan_host);
return -EINVAL;
}
- clk->parent = clk->parent_table[val];
+ clk_reparent(clk, clk->parent_table[val]);
if (!clk->parent) {
pr_err("sh_clk_init_parent: unable to set parent");
return -EINVAL;
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
- depends on (ARCH_S3C64XX || ARCH_S5P64X0)
+ depends on (ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
select S3C64XX_DMA if ARCH_S3C64XX
help
SPI driver for Samsung S3C64XX and newer SoCs.
#endif
-static struct pci_driver pch_spi_pcidev = {
+static struct pci_driver pch_spi_pcidev_driver = {
.name = "pch_spi",
.id_table = pch_spi_pcidev_id,
.probe = pch_spi_probe,
if (ret)
return ret;
- ret = pci_register_driver(&pch_spi_pcidev);
+ ret = pci_register_driver(&pch_spi_pcidev_driver);
if (ret)
return ret;
static void __exit pch_spi_exit(void)
{
- pci_unregister_driver(&pch_spi_pcidev);
+ pci_unregister_driver(&pch_spi_pcidev_driver);
platform_driver_unregister(&pch_spi_pd_driver);
}
module_exit(pch_spi_exit);
u32 tmp;
/* We do only have one cardbus device behind the bridge. */
- if (pc->cardbusmode && (dev >= 1))
+ if (pc->cardbusmode && (dev > 1))
goto out;
if (bus == 0) {
source "drivers/staging/frontier/Kconfig"
-source "drivers/staging/pohmelfs/Kconfig"
-
source "drivers/staging/phison/Kconfig"
source "drivers/staging/line6/Kconfig"
source "drivers/staging/ste_rmi4/Kconfig"
-source "drivers/staging/gma500/Kconfig"
-
source "drivers/staging/mei/Kconfig"
source "drivers/staging/nvec/Kconfig"
obj-$(CONFIG_RTS_PSTOR) += rts_pstor/
obj-$(CONFIG_RTS5139) += rts5139/
obj-$(CONFIG_TRANZPORT) += frontier/
-obj-$(CONFIG_POHMELFS) += pohmelfs/
obj-$(CONFIG_IDE_PHISON) += phison/
obj-$(CONFIG_LINE6_USB) += line6/
obj-$(CONFIG_USB_SERIAL_QUATECH2) += serqt_usb2/
obj-$(CONFIG_SPEAKUP) += speakup/
obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217) += cptm1217/
obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += ste_rmi4/
-obj-$(CONFIG_DRM_PSB) += gma500/
obj-$(CONFIG_INTEL_MEI) += mei/
obj-$(CONFIG_MFD_NVEC) += nvec/
obj-$(CONFIG_DRM_OMAP) += omapdrm/
config ANDROID_RAM_CONSOLE
bool "Android RAM buffer console"
+ depends on !S390 && !UML
default n
config ANDROID_RAM_CONSOLE_ENABLE_VERBOSE
---help---
Register processes to be killed when memory is low
-config ANDROID_PMEM
- bool "Android pmem allocator"
- depends on ARM
-
source "drivers/staging/android/switch/Kconfig"
endif # if ANDROID
obj-$(CONFIG_ANDROID_TIMED_OUTPUT) += timed_output.o
obj-$(CONFIG_ANDROID_TIMED_GPIO) += timed_gpio.o
obj-$(CONFIG_ANDROID_LOW_MEMORY_KILLER) += lowmemorykiller.o
-obj-$(CONFIG_ANDROID_PMEM) += pmem.o
obj-$(CONFIG_ANDROID_SWITCH) += switch/
+++ /dev/null
-/* include/linux/android_pmem.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _ANDROID_PMEM_H_
-#define _ANDROID_PMEM_H_
-
-#define PMEM_IOCTL_MAGIC 'p'
-#define PMEM_GET_PHYS _IOW(PMEM_IOCTL_MAGIC, 1, unsigned int)
-#define PMEM_MAP _IOW(PMEM_IOCTL_MAGIC, 2, unsigned int)
-#define PMEM_GET_SIZE _IOW(PMEM_IOCTL_MAGIC, 3, unsigned int)
-#define PMEM_UNMAP _IOW(PMEM_IOCTL_MAGIC, 4, unsigned int)
-/* This ioctl will allocate pmem space, backing the file, it will fail
- * if the file already has an allocation, pass it the len as the argument
- * to the ioctl */
-#define PMEM_ALLOCATE _IOW(PMEM_IOCTL_MAGIC, 5, unsigned int)
-/* This will connect a one pmem file to another, pass the file that is already
- * backed in memory as the argument to the ioctl
- */
-#define PMEM_CONNECT _IOW(PMEM_IOCTL_MAGIC, 6, unsigned int)
-/* Returns the total size of the pmem region it is sent to as a pmem_region
- * struct (with offset set to 0).
- */
-#define PMEM_GET_TOTAL_SIZE _IOW(PMEM_IOCTL_MAGIC, 7, unsigned int)
-#define PMEM_CACHE_FLUSH _IOW(PMEM_IOCTL_MAGIC, 8, unsigned int)
-
-struct android_pmem_platform_data
-{
- const char* name;
- /* starting physical address of memory region */
- unsigned long start;
- /* size of memory region */
- unsigned long size;
- /* set to indicate the region should not be managed with an allocator */
- unsigned no_allocator;
- /* set to indicate maps of this region should be cached, if a mix of
- * cached and uncached is desired, set this and open the device with
- * O_SYNC to get an uncached region */
- unsigned cached;
- /* The MSM7k has bits to enable a write buffer in the bus controller*/
- unsigned buffered;
-};
-
-struct pmem_region {
- unsigned long offset;
- unsigned long len;
-};
-
-#ifdef CONFIG_ANDROID_PMEM
-int is_pmem_file(struct file *file);
-int get_pmem_file(int fd, unsigned long *start, unsigned long *vstart,
- unsigned long *end, struct file **filp);
-int get_pmem_user_addr(struct file *file, unsigned long *start,
- unsigned long *end);
-void put_pmem_file(struct file* file);
-void flush_pmem_file(struct file *file, unsigned long start, unsigned long len);
-int pmem_setup(struct android_pmem_platform_data *pdata,
- long (*ioctl)(struct file *, unsigned int, unsigned long),
- int (*release)(struct inode *, struct file *));
-int pmem_remap(struct pmem_region *region, struct file *file,
- unsigned operation);
-
-#else
-static inline int is_pmem_file(struct file *file) { return 0; }
-static inline int get_pmem_file(int fd, unsigned long *start,
- unsigned long *vstart, unsigned long *end,
- struct file **filp) { return -ENOSYS; }
-static inline int get_pmem_user_addr(struct file *file, unsigned long *start,
- unsigned long *end) { return -ENOSYS; }
-static inline void put_pmem_file(struct file* file) { return; }
-static inline void flush_pmem_file(struct file *file, unsigned long start,
- unsigned long len) { return; }
-static inline int pmem_setup(struct android_pmem_platform_data *pdata,
- long (*ioctl)(struct file *, unsigned int, unsigned long),
- int (*release)(struct inode *, struct file *)) { return -ENOSYS; }
-
-static inline int pmem_remap(struct pmem_region *region, struct file *file,
- unsigned operation) { return -ENOSYS; }
-#endif
-
-#endif //_ANDROID_PPP_H_
-
static DEFINE_MUTEX(binder_lock);
static DEFINE_MUTEX(binder_deferred_lock);
+static DEFINE_MUTEX(binder_mmap_lock);
static HLIST_HEAD(binder_procs);
static HLIST_HEAD(binder_deferred_list);
if (mm) {
down_write(&mm->mmap_sem);
vma = proc->vma;
+ if (vma && mm != vma->vm_mm) {
+ pr_err("binder: %d: vma mm and task mm mismatch\n",
+ proc->pid);
+ vma = NULL;
+ }
}
if (allocate == 0)
proc->pid, vma->vm_start, vma->vm_end,
(vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags,
(unsigned long)pgprot_val(vma->vm_page_prot));
- dump_stack();
}
static void binder_vma_close(struct vm_area_struct *vma)
}
vma->vm_flags = (vma->vm_flags | VM_DONTCOPY) & ~VM_MAYWRITE;
+ mutex_lock(&binder_mmap_lock);
if (proc->buffer) {
ret = -EBUSY;
failure_string = "already mapped";
}
proc->buffer = area->addr;
proc->user_buffer_offset = vma->vm_start - (uintptr_t)proc->buffer;
+ mutex_unlock(&binder_mmap_lock);
#ifdef CONFIG_CPU_CACHE_VIPT
if (cache_is_vipt_aliasing()) {
binder_insert_free_buffer(proc, buffer);
proc->free_async_space = proc->buffer_size / 2;
barrier();
- proc->files = get_files_struct(current);
+ proc->files = get_files_struct(proc->tsk);
proc->vma = vma;
/*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n",
kfree(proc->pages);
proc->pages = NULL;
err_alloc_pages_failed:
+ mutex_lock(&binder_mmap_lock);
vfree(proc->buffer);
proc->buffer = NULL;
err_get_vm_area_failed:
err_already_mapped:
+ mutex_unlock(&binder_mmap_lock);
err_bad_arg:
printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n",
proc->pid, vma->vm_start, vma->vm_end, failure_string, ret);
static int lowmem_minfree_size = 4;
static struct task_struct *lowmem_deathpending;
+static unsigned long lowmem_deathpending_timeout;
#define lowmem_print(level, x...) \
do { \
* Note: Currently you need CONFIG_PROFILING
* for this to work correctly.
*/
- if (lowmem_deathpending)
+ if (lowmem_deathpending &&
+ time_before_eq(jiffies, lowmem_deathpending_timeout))
return 0;
if (lowmem_adj_size < array_size)
*/
#ifdef CONFIG_PROFILING
lowmem_deathpending = selected;
+ lowmem_deathpending_timeout = jiffies + HZ;
task_handoff_register(&task_nb);
#endif
force_sig(SIGKILL, selected);
+++ /dev/null
-/* pmem.c
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/miscdevice.h>
-#include <linux/platform_device.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/mm.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/debugfs.h>
-#include <linux/mempolicy.h>
-#include <linux/sched.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/cacheflush.h>
-#include "android_pmem.h"
-
-#define PMEM_MAX_DEVICES 10
-#define PMEM_MAX_ORDER 128
-#define PMEM_MIN_ALLOC PAGE_SIZE
-
-#define PMEM_DEBUG 1
-
-/* indicates that a refernce to this file has been taken via get_pmem_file,
- * the file should not be released until put_pmem_file is called */
-#define PMEM_FLAGS_BUSY 0x1
-/* indicates that this is a suballocation of a larger master range */
-#define PMEM_FLAGS_CONNECTED 0x1 << 1
-/* indicates this is a master and not a sub allocation and that it is mmaped */
-#define PMEM_FLAGS_MASTERMAP 0x1 << 2
-/* submap and unsubmap flags indicate:
- * 00: subregion has never been mmaped
- * 10: subregion has been mmaped, reference to the mm was taken
- * 11: subretion has ben released, refernece to the mm still held
- * 01: subretion has been released, reference to the mm has been released
- */
-#define PMEM_FLAGS_SUBMAP 0x1 << 3
-#define PMEM_FLAGS_UNSUBMAP 0x1 << 4
-
-
-struct pmem_data {
- /* in alloc mode: an index into the bitmap
- * in no_alloc mode: the size of the allocation */
- int index;
- /* see flags above for descriptions */
- unsigned int flags;
- /* protects this data field, if the mm_mmap sem will be held at the
- * same time as this sem, the mm sem must be taken first (as this is
- * the order for vma_open and vma_close ops */
- struct rw_semaphore sem;
- /* info about the mmaping process */
- struct vm_area_struct *vma;
- /* task struct of the mapping process */
- struct task_struct *task;
- /* process id of teh mapping process */
- pid_t pid;
- /* file descriptor of the master */
- int master_fd;
- /* file struct of the master */
- struct file *master_file;
- /* a list of currently available regions if this is a suballocation */
- struct list_head region_list;
- /* a linked list of data so we can access them for debugging */
- struct list_head list;
-#if PMEM_DEBUG
- int ref;
-#endif
-};
-
-struct pmem_bits {
- unsigned allocated:1; /* 1 if allocated, 0 if free */
- unsigned order:7; /* size of the region in pmem space */
-};
-
-struct pmem_region_node {
- struct pmem_region region;
- struct list_head list;
-};
-
-#define PMEM_DEBUG_MSGS 0
-#if PMEM_DEBUG_MSGS
-#define DLOG(fmt,args...) \
- do { printk(KERN_INFO "[%s:%s:%d] "fmt, __FILE__, __func__, __LINE__, \
- ##args); } \
- while (0)
-#else
-#define DLOG(x...) do {} while (0)
-#endif
-
-struct pmem_info {
- struct miscdevice dev;
- /* physical start address of the remaped pmem space */
- unsigned long base;
- /* vitual start address of the remaped pmem space */
- unsigned char __iomem *vbase;
- /* total size of the pmem space */
- unsigned long size;
- /* number of entries in the pmem space */
- unsigned long num_entries;
- /* pfn of the garbage page in memory */
- unsigned long garbage_pfn;
- /* index of the garbage page in the pmem space */
- int garbage_index;
- /* the bitmap for the region indicating which entries are allocated
- * and which are free */
- struct pmem_bits *bitmap;
- /* indicates the region should not be managed with an allocator */
- unsigned no_allocator;
- /* indicates maps of this region should be cached, if a mix of
- * cached and uncached is desired, set this and open the device with
- * O_SYNC to get an uncached region */
- unsigned cached;
- unsigned buffered;
- /* in no_allocator mode the first mapper gets the whole space and sets
- * this flag */
- unsigned allocated;
- /* for debugging, creates a list of pmem file structs, the
- * data_list_lock should be taken before pmem_data->sem if both are
- * needed */
- struct mutex data_list_lock;
- struct list_head data_list;
- /* pmem_sem protects the bitmap array
- * a write lock should be held when modifying entries in bitmap
- * a read lock should be held when reading data from bits or
- * dereferencing a pointer into bitmap
- *
- * pmem_data->sem protects the pmem data of a particular file
- * Many of the function that require the pmem_data->sem have a non-
- * locking version for when the caller is already holding that sem.
- *
- * IF YOU TAKE BOTH LOCKS TAKE THEM IN THIS ORDER:
- * down(pmem_data->sem) => down(bitmap_sem)
- */
- struct rw_semaphore bitmap_sem;
-
- long (*ioctl)(struct file *, unsigned int, unsigned long);
- int (*release)(struct inode *, struct file *);
-};
-
-static struct pmem_info pmem[PMEM_MAX_DEVICES];
-static int id_count;
-
-#define PMEM_IS_FREE(id, index) !(pmem[id].bitmap[index].allocated)
-#define PMEM_ORDER(id, index) pmem[id].bitmap[index].order
-#define PMEM_BUDDY_INDEX(id, index) (index ^ (1 << PMEM_ORDER(id, index)))
-#define PMEM_NEXT_INDEX(id, index) (index + (1 << PMEM_ORDER(id, index)))
-#define PMEM_OFFSET(index) (index * PMEM_MIN_ALLOC)
-#define PMEM_START_ADDR(id, index) (PMEM_OFFSET(index) + pmem[id].base)
-#define PMEM_LEN(id, index) ((1 << PMEM_ORDER(id, index)) * PMEM_MIN_ALLOC)
-#define PMEM_END_ADDR(id, index) (PMEM_START_ADDR(id, index) + \
- PMEM_LEN(id, index))
-#define PMEM_START_VADDR(id, index) (PMEM_OFFSET(id, index) + pmem[id].vbase)
-#define PMEM_END_VADDR(id, index) (PMEM_START_VADDR(id, index) + \
- PMEM_LEN(id, index))
-#define PMEM_REVOKED(data) (data->flags & PMEM_FLAGS_REVOKED)
-#define PMEM_IS_PAGE_ALIGNED(addr) (!((addr) & (~PAGE_MASK)))
-#define PMEM_IS_SUBMAP(data) ((data->flags & PMEM_FLAGS_SUBMAP) && \
- (!(data->flags & PMEM_FLAGS_UNSUBMAP)))
-
-static int pmem_release(struct inode *, struct file *);
-static int pmem_mmap(struct file *, struct vm_area_struct *);
-static int pmem_open(struct inode *, struct file *);
-static long pmem_ioctl(struct file *, unsigned int, unsigned long);
-
-struct file_operations pmem_fops = {
- .release = pmem_release,
- .mmap = pmem_mmap,
- .open = pmem_open,
- .unlocked_ioctl = pmem_ioctl,
-};
-
-static int get_id(struct file *file)
-{
- return MINOR(file->f_dentry->d_inode->i_rdev);
-}
-
-int is_pmem_file(struct file *file)
-{
- int id;
-
- if (unlikely(!file || !file->f_dentry || !file->f_dentry->d_inode))
- return 0;
- id = get_id(file);
- if (unlikely(id >= PMEM_MAX_DEVICES))
- return 0;
- if (unlikely(file->f_dentry->d_inode->i_rdev !=
- MKDEV(MISC_MAJOR, pmem[id].dev.minor)))
- return 0;
- return 1;
-}
-
-static int has_allocation(struct file *file)
-{
- struct pmem_data *data;
- /* check is_pmem_file first if not accessed via pmem_file_ops */
-
- if (unlikely(!file->private_data))
- return 0;
- data = (struct pmem_data *)file->private_data;
- if (unlikely(data->index < 0))
- return 0;
- return 1;
-}
-
-static int is_master_owner(struct file *file)
-{
- struct file *master_file;
- struct pmem_data *data;
- int put_needed, ret = 0;
-
- if (!is_pmem_file(file) || !has_allocation(file))
- return 0;
- data = (struct pmem_data *)file->private_data;
- if (PMEM_FLAGS_MASTERMAP & data->flags)
- return 1;
- master_file = fget_light(data->master_fd, &put_needed);
- if (master_file && data->master_file == master_file)
- ret = 1;
- fput_light(master_file, put_needed);
- return ret;
-}
-
-static int pmem_free(int id, int index)
-{
- /* caller should hold the write lock on pmem_sem! */
- int buddy, curr = index;
- DLOG("index %d\n", index);
-
- if (pmem[id].no_allocator) {
- pmem[id].allocated = 0;
- return 0;
- }
- /* clean up the bitmap, merging any buddies */
- pmem[id].bitmap[curr].allocated = 0;
- /* find a slots buddy Buddy# = Slot# ^ (1 << order)
- * if the buddy is also free merge them
- * repeat until the buddy is not free or end of the bitmap is reached
- */
- do {
- buddy = PMEM_BUDDY_INDEX(id, curr);
- if (PMEM_IS_FREE(id, buddy) &&
- PMEM_ORDER(id, buddy) == PMEM_ORDER(id, curr)) {
- PMEM_ORDER(id, buddy)++;
- PMEM_ORDER(id, curr)++;
- curr = min(buddy, curr);
- } else {
- break;
- }
- } while (curr < pmem[id].num_entries);
-
- return 0;
-}
-
-static void pmem_revoke(struct file *file, struct pmem_data *data);
-
-static int pmem_release(struct inode *inode, struct file *file)
-{
- struct pmem_data *data = (struct pmem_data *)file->private_data;
- struct pmem_region_node *region_node;
- struct list_head *elt, *elt2;
- int id = get_id(file), ret = 0;
-
-
- mutex_lock(&pmem[id].data_list_lock);
- /* if this file is a master, revoke all the memory in the connected
- * files */
- if (PMEM_FLAGS_MASTERMAP & data->flags) {
- struct pmem_data *sub_data;
- list_for_each(elt, &pmem[id].data_list) {
- sub_data = list_entry(elt, struct pmem_data, list);
- down_read(&sub_data->sem);
- if (PMEM_IS_SUBMAP(sub_data) &&
- file == sub_data->master_file) {
- up_read(&sub_data->sem);
- pmem_revoke(file, sub_data);
- } else
- up_read(&sub_data->sem);
- }
- }
- list_del(&data->list);
- mutex_unlock(&pmem[id].data_list_lock);
-
-
- down_write(&data->sem);
-
- /* if its not a conencted file and it has an allocation, free it */
- if (!(PMEM_FLAGS_CONNECTED & data->flags) && has_allocation(file)) {
- down_write(&pmem[id].bitmap_sem);
- ret = pmem_free(id, data->index);
- up_write(&pmem[id].bitmap_sem);
- }
-
- /* if this file is a submap (mapped, connected file), downref the
- * task struct */
- if (PMEM_FLAGS_SUBMAP & data->flags)
- if (data->task) {
- put_task_struct(data->task);
- data->task = NULL;
- }
-
- file->private_data = NULL;
-
- list_for_each_safe(elt, elt2, &data->region_list) {
- region_node = list_entry(elt, struct pmem_region_node, list);
- list_del(elt);
- kfree(region_node);
- }
- BUG_ON(!list_empty(&data->region_list));
-
- up_write(&data->sem);
- kfree(data);
- if (pmem[id].release)
- ret = pmem[id].release(inode, file);
-
- return ret;
-}
-
-static int pmem_open(struct inode *inode, struct file *file)
-{
- struct pmem_data *data;
- int id = get_id(file);
- int ret = 0;
-
- DLOG("current %u file %p(%d)\n", current->pid, file, file_count(file));
- /* setup file->private_data to indicate its unmapped */
- /* you can only open a pmem device one time */
- if (file->private_data != NULL)
- return -1;
- data = kmalloc(sizeof(struct pmem_data), GFP_KERNEL);
- if (!data) {
- printk("pmem: unable to allocate memory for pmem metadata.");
- return -1;
- }
- data->flags = 0;
- data->index = -1;
- data->task = NULL;
- data->vma = NULL;
- data->pid = 0;
- data->master_file = NULL;
-#if PMEM_DEBUG
- data->ref = 0;
-#endif
- INIT_LIST_HEAD(&data->region_list);
- init_rwsem(&data->sem);
-
- file->private_data = data;
- INIT_LIST_HEAD(&data->list);
-
- mutex_lock(&pmem[id].data_list_lock);
- list_add(&data->list, &pmem[id].data_list);
- mutex_unlock(&pmem[id].data_list_lock);
- return ret;
-}
-
-static unsigned long pmem_order(unsigned long len)
-{
- int i;
-
- len = (len + PMEM_MIN_ALLOC - 1)/PMEM_MIN_ALLOC;
- len--;
- for (i = 0; i < sizeof(len)*8; i++)
- if (len >> i == 0)
- break;
- return i;
-}
-
-static int pmem_allocate(int id, unsigned long len)
-{
- /* caller should hold the write lock on pmem_sem! */
- /* return the corresponding pdata[] entry */
- int curr = 0;
- int end = pmem[id].num_entries;
- int best_fit = -1;
- unsigned long order = pmem_order(len);
-
- if (pmem[id].no_allocator) {
- DLOG("no allocator");
- if ((len > pmem[id].size) || pmem[id].allocated)
- return -1;
- pmem[id].allocated = 1;
- return len;
- }
-
- if (order > PMEM_MAX_ORDER)
- return -1;
- DLOG("order %lx\n", order);
-
- /* look through the bitmap:
- * if you find a free slot of the correct order use it
- * otherwise, use the best fit (smallest with size > order) slot
- */
- while (curr < end) {
- if (PMEM_IS_FREE(id, curr)) {
- if (PMEM_ORDER(id, curr) == (unsigned char)order) {
- /* set the not free bit and clear others */
- best_fit = curr;
- break;
- }
- if (PMEM_ORDER(id, curr) > (unsigned char)order &&
- (best_fit < 0 ||
- PMEM_ORDER(id, curr) < PMEM_ORDER(id, best_fit)))
- best_fit = curr;
- }
- curr = PMEM_NEXT_INDEX(id, curr);
- }
-
- /* if best_fit < 0, there are no suitable slots,
- * return an error
- */
- if (best_fit < 0) {
- printk("pmem: no space left to allocate!\n");
- return -1;
- }
-
- /* now partition the best fit:
- * split the slot into 2 buddies of order - 1
- * repeat until the slot is of the correct order
- */
- while (PMEM_ORDER(id, best_fit) > (unsigned char)order) {
- int buddy;
- PMEM_ORDER(id, best_fit) -= 1;
- buddy = PMEM_BUDDY_INDEX(id, best_fit);
- PMEM_ORDER(id, buddy) = PMEM_ORDER(id, best_fit);
- }
- pmem[id].bitmap[best_fit].allocated = 1;
- return best_fit;
-}
-
-static pgprot_t pmem_access_prot(struct file *file, pgprot_t vma_prot)
-{
- int id = get_id(file);
-#ifdef pgprot_noncached
- if (pmem[id].cached == 0 || file->f_flags & O_SYNC)
- return pgprot_noncached(vma_prot);
-#endif
-#ifdef pgprot_ext_buffered
- else if (pmem[id].buffered)
- return pgprot_ext_buffered(vma_prot);
-#endif
- return vma_prot;
-}
-
-static unsigned long pmem_start_addr(int id, struct pmem_data *data)
-{
- if (pmem[id].no_allocator)
- return PMEM_START_ADDR(id, 0);
- else
- return PMEM_START_ADDR(id, data->index);
-
-}
-
-static void *pmem_start_vaddr(int id, struct pmem_data *data)
-{
- return pmem_start_addr(id, data) - pmem[id].base + pmem[id].vbase;
-}
-
-static unsigned long pmem_len(int id, struct pmem_data *data)
-{
- if (pmem[id].no_allocator)
- return data->index;
- else
- return PMEM_LEN(id, data->index);
-}
-
-static int pmem_map_garbage(int id, struct vm_area_struct *vma,
- struct pmem_data *data, unsigned long offset,
- unsigned long len)
-{
- int i, garbage_pages = len >> PAGE_SHIFT;
-
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP | VM_SHARED | VM_WRITE;
- for (i = 0; i < garbage_pages; i++) {
- if (vm_insert_pfn(vma, vma->vm_start + offset + (i * PAGE_SIZE),
- pmem[id].garbage_pfn))
- return -EAGAIN;
- }
- return 0;
-}
-
-static int pmem_unmap_pfn_range(int id, struct vm_area_struct *vma,
- struct pmem_data *data, unsigned long offset,
- unsigned long len)
-{
- int garbage_pages;
- DLOG("unmap offset %lx len %lx\n", offset, len);
-
- BUG_ON(!PMEM_IS_PAGE_ALIGNED(len));
-
- garbage_pages = len >> PAGE_SHIFT;
- zap_page_range(vma, vma->vm_start + offset, len, NULL);
- pmem_map_garbage(id, vma, data, offset, len);
- return 0;
-}
-
-static int pmem_map_pfn_range(int id, struct vm_area_struct *vma,
- struct pmem_data *data, unsigned long offset,
- unsigned long len)
-{
- DLOG("map offset %lx len %lx\n", offset, len);
- BUG_ON(!PMEM_IS_PAGE_ALIGNED(vma->vm_start));
- BUG_ON(!PMEM_IS_PAGE_ALIGNED(vma->vm_end));
- BUG_ON(!PMEM_IS_PAGE_ALIGNED(len));
- BUG_ON(!PMEM_IS_PAGE_ALIGNED(offset));
-
- if (io_remap_pfn_range(vma, vma->vm_start + offset,
- (pmem_start_addr(id, data) + offset) >> PAGE_SHIFT,
- len, vma->vm_page_prot)) {
- return -EAGAIN;
- }
- return 0;
-}
-
-static int pmem_remap_pfn_range(int id, struct vm_area_struct *vma,
- struct pmem_data *data, unsigned long offset,
- unsigned long len)
-{
- /* hold the mm semp for the vma you are modifying when you call this */
- BUG_ON(!vma);
- zap_page_range(vma, vma->vm_start + offset, len, NULL);
- return pmem_map_pfn_range(id, vma, data, offset, len);
-}
-
-static void pmem_vma_open(struct vm_area_struct *vma)
-{
- struct file *file = vma->vm_file;
- struct pmem_data *data = file->private_data;
- int id = get_id(file);
- /* this should never be called as we don't support copying pmem
- * ranges via fork */
- BUG_ON(!has_allocation(file));
- down_write(&data->sem);
- /* remap the garbage pages, forkers don't get access to the data */
- pmem_unmap_pfn_range(id, vma, data, 0, vma->vm_start - vma->vm_end);
- up_write(&data->sem);
-}
-
-static void pmem_vma_close(struct vm_area_struct *vma)
-{
- struct file *file = vma->vm_file;
- struct pmem_data *data = file->private_data;
-
- DLOG("current %u ppid %u file %p count %d\n", current->pid,
- current->parent->pid, file, file_count(file));
- if (unlikely(!is_pmem_file(file) || !has_allocation(file))) {
- printk(KERN_WARNING "pmem: something is very wrong, you are "
- "closing a vm backing an allocation that doesn't "
- "exist!\n");
- return;
- }
- down_write(&data->sem);
- if (data->vma == vma) {
- data->vma = NULL;
- if ((data->flags & PMEM_FLAGS_CONNECTED) &&
- (data->flags & PMEM_FLAGS_SUBMAP))
- data->flags |= PMEM_FLAGS_UNSUBMAP;
- }
- /* the kernel is going to free this vma now anyway */
- up_write(&data->sem);
-}
-
-static struct vm_operations_struct vm_ops = {
- .open = pmem_vma_open,
- .close = pmem_vma_close,
-};
-
-static int pmem_mmap(struct file *file, struct vm_area_struct *vma)
-{
- struct pmem_data *data;
- int index;
- unsigned long vma_size = vma->vm_end - vma->vm_start;
- int ret = 0, id = get_id(file);
-
- if (vma->vm_pgoff || !PMEM_IS_PAGE_ALIGNED(vma_size)) {
-#if PMEM_DEBUG
- printk(KERN_ERR "pmem: mmaps must be at offset zero, aligned"
- " and a multiple of pages_size.\n");
-#endif
- return -EINVAL;
- }
-
- data = (struct pmem_data *)file->private_data;
- down_write(&data->sem);
- /* check this file isn't already mmaped, for submaps check this file
- * has never been mmaped */
- if ((data->flags & PMEM_FLAGS_SUBMAP) ||
- (data->flags & PMEM_FLAGS_UNSUBMAP)) {
-#if PMEM_DEBUG
- printk(KERN_ERR "pmem: you can only mmap a pmem file once, "
- "this file is already mmaped. %x\n", data->flags);
-#endif
- ret = -EINVAL;
- goto error;
- }
- /* if file->private_data == unalloced, alloc*/
- if (data && data->index == -1) {
- down_write(&pmem[id].bitmap_sem);
- index = pmem_allocate(id, vma->vm_end - vma->vm_start);
- up_write(&pmem[id].bitmap_sem);
- data->index = index;
- }
- /* either no space was available or an error occured */
- if (!has_allocation(file)) {
- ret = -EINVAL;
- printk("pmem: could not find allocation for map.\n");
- goto error;
- }
-
- if (pmem_len(id, data) < vma_size) {
-#if PMEM_DEBUG
- printk(KERN_WARNING "pmem: mmap size [%lu] does not match"
- "size of backing region [%lu].\n", vma_size,
- pmem_len(id, data));
-#endif
- ret = -EINVAL;
- goto error;
- }
-
- vma->vm_pgoff = pmem_start_addr(id, data) >> PAGE_SHIFT;
- vma->vm_page_prot = pmem_access_prot(file, vma->vm_page_prot);
-
- if (data->flags & PMEM_FLAGS_CONNECTED) {
- struct pmem_region_node *region_node;
- struct list_head *elt;
- if (pmem_map_garbage(id, vma, data, 0, vma_size)) {
- printk("pmem: mmap failed in kernel!\n");
- ret = -EAGAIN;
- goto error;
- }
- list_for_each(elt, &data->region_list) {
- region_node = list_entry(elt, struct pmem_region_node,
- list);
- DLOG("remapping file: %p %lx %lx\n", file,
- region_node->region.offset,
- region_node->region.len);
- if (pmem_remap_pfn_range(id, vma, data,
- region_node->region.offset,
- region_node->region.len)) {
- ret = -EAGAIN;
- goto error;
- }
- }
- data->flags |= PMEM_FLAGS_SUBMAP;
- get_task_struct(current->group_leader);
- data->task = current->group_leader;
- data->vma = vma;
-#if PMEM_DEBUG
- data->pid = current->pid;
-#endif
- DLOG("submmapped file %p vma %p pid %u\n", file, vma,
- current->pid);
- } else {
- if (pmem_map_pfn_range(id, vma, data, 0, vma_size)) {
- printk(KERN_INFO "pmem: mmap failed in kernel!\n");
- ret = -EAGAIN;
- goto error;
- }
- data->flags |= PMEM_FLAGS_MASTERMAP;
- data->pid = current->pid;
- }
- vma->vm_ops = &vm_ops;
-error:
- up_write(&data->sem);
- return ret;
-}
-
-/* the following are the api for accessing pmem regions by other drivers
- * from inside the kernel */
-int get_pmem_user_addr(struct file *file, unsigned long *start,
- unsigned long *len)
-{
- struct pmem_data *data;
- if (!is_pmem_file(file) || !has_allocation(file)) {
-#if PMEM_DEBUG
- printk(KERN_INFO "pmem: requested pmem data from invalid"
- "file.\n");
-#endif
- return -1;
- }
- data = (struct pmem_data *)file->private_data;
- down_read(&data->sem);
- if (data->vma) {
- *start = data->vma->vm_start;
- *len = data->vma->vm_end - data->vma->vm_start;
- } else {
- *start = 0;
- *len = 0;
- }
- up_read(&data->sem);
- return 0;
-}
-
-int get_pmem_addr(struct file *file, unsigned long *start,
- unsigned long *vstart, unsigned long *len)
-{
- struct pmem_data *data;
- int id;
-
- if (!is_pmem_file(file) || !has_allocation(file)) {
- return -1;
- }
-
- data = (struct pmem_data *)file->private_data;
- if (data->index == -1) {
-#if PMEM_DEBUG
- printk(KERN_INFO "pmem: requested pmem data from file with no "
- "allocation.\n");
- return -1;
-#endif
- }
- id = get_id(file);
-
- down_read(&data->sem);
- *start = pmem_start_addr(id, data);
- *len = pmem_len(id, data);
- *vstart = (unsigned long)pmem_start_vaddr(id, data);
- up_read(&data->sem);
-#if PMEM_DEBUG
- down_write(&data->sem);
- data->ref++;
- up_write(&data->sem);
-#endif
- return 0;
-}
-
-int get_pmem_file(int fd, unsigned long *start, unsigned long *vstart,
- unsigned long *len, struct file **filp)
-{
- struct file *file;
-
- file = fget(fd);
- if (unlikely(file == NULL)) {
- printk(KERN_INFO "pmem: requested data from file descriptor "
- "that doesn't exist.");
- return -1;
- }
-
- if (get_pmem_addr(file, start, vstart, len))
- goto end;
-
- if (filp)
- *filp = file;
- return 0;
-end:
- fput(file);
- return -1;
-}
-
-void put_pmem_file(struct file *file)
-{
- struct pmem_data *data;
- int id;
-
- if (!is_pmem_file(file))
- return;
- id = get_id(file);
- data = (struct pmem_data *)file->private_data;
-#if PMEM_DEBUG
- down_write(&data->sem);
- if (data->ref == 0) {
- printk("pmem: pmem_put > pmem_get %s (pid %d)\n",
- pmem[id].dev.name, data->pid);
- BUG();
- }
- data->ref--;
- up_write(&data->sem);
-#endif
- fput(file);
-}
-
-void flush_pmem_file(struct file *file, unsigned long offset, unsigned long len)
-{
- struct pmem_data *data;
- int id;
- void *vaddr;
- struct pmem_region_node *region_node;
- struct list_head *elt;
- void *flush_start, *flush_end;
-
- if (!is_pmem_file(file) || !has_allocation(file)) {
- return;
- }
-
- id = get_id(file);
- data = (struct pmem_data *)file->private_data;
- if (!pmem[id].cached || file->f_flags & O_SYNC)
- return;
-
- down_read(&data->sem);
- vaddr = pmem_start_vaddr(id, data);
- /* if this isn't a submmapped file, flush the whole thing */
- if (unlikely(!(data->flags & PMEM_FLAGS_CONNECTED))) {
- dmac_flush_range(vaddr, vaddr + pmem_len(id, data));
- goto end;
- }
- /* otherwise, flush the region of the file we are drawing */
- list_for_each(elt, &data->region_list) {
- region_node = list_entry(elt, struct pmem_region_node, list);
- if ((offset >= region_node->region.offset) &&
- ((offset + len) <= (region_node->region.offset +
- region_node->region.len))) {
- flush_start = vaddr + region_node->region.offset;
- flush_end = flush_start + region_node->region.len;
- dmac_flush_range(flush_start, flush_end);
- break;
- }
- }
-end:
- up_read(&data->sem);
-}
-
-static int pmem_connect(unsigned long connect, struct file *file)
-{
- struct pmem_data *data = (struct pmem_data *)file->private_data;
- struct pmem_data *src_data;
- struct file *src_file;
- int ret = 0, put_needed;
-
- down_write(&data->sem);
- /* retrieve the src file and check it is a pmem file with an alloc */
- src_file = fget_light(connect, &put_needed);
- DLOG("connect %p to %p\n", file, src_file);
- if (!src_file) {
- printk("pmem: src file not found!\n");
- ret = -EINVAL;
- goto err_no_file;
- }
- if (unlikely(!is_pmem_file(src_file) || !has_allocation(src_file))) {
- printk(KERN_INFO "pmem: src file is not a pmem file or has no "
- "alloc!\n");
- ret = -EINVAL;
- goto err_bad_file;
- }
- src_data = (struct pmem_data *)src_file->private_data;
-
- if (has_allocation(file) && (data->index != src_data->index)) {
- printk("pmem: file is already mapped but doesn't match this"
- " src_file!\n");
- ret = -EINVAL;
- goto err_bad_file;
- }
- data->index = src_data->index;
- data->flags |= PMEM_FLAGS_CONNECTED;
- data->master_fd = connect;
- data->master_file = src_file;
-
-err_bad_file:
- fput_light(src_file, put_needed);
-err_no_file:
- up_write(&data->sem);
- return ret;
-}
-
-static void pmem_unlock_data_and_mm(struct pmem_data *data,
- struct mm_struct *mm)
-{
- up_write(&data->sem);
- if (mm != NULL) {
- up_write(&mm->mmap_sem);
- mmput(mm);
- }
-}
-
-static int pmem_lock_data_and_mm(struct file *file, struct pmem_data *data,
- struct mm_struct **locked_mm)
-{
- int ret = 0;
- struct mm_struct *mm = NULL;
- *locked_mm = NULL;
-lock_mm:
- down_read(&data->sem);
- if (PMEM_IS_SUBMAP(data)) {
- mm = get_task_mm(data->task);
- if (!mm) {
-#if PMEM_DEBUG
- printk("pmem: can't remap task is gone!\n");
-#endif
- up_read(&data->sem);
- return -1;
- }
- }
- up_read(&data->sem);
-
- if (mm)
- down_write(&mm->mmap_sem);
-
- down_write(&data->sem);
- /* check that the file didn't get mmaped before we could take the
- * data sem, this should be safe b/c you can only submap each file
- * once */
- if (PMEM_IS_SUBMAP(data) && !mm) {
- pmem_unlock_data_and_mm(data, mm);
- up_write(&data->sem);
- goto lock_mm;
- }
- /* now check that vma.mm is still there, it could have been
- * deleted by vma_close before we could get the data->sem */
- if ((data->flags & PMEM_FLAGS_UNSUBMAP) && (mm != NULL)) {
- /* might as well release this */
- if (data->flags & PMEM_FLAGS_SUBMAP) {
- put_task_struct(data->task);
- data->task = NULL;
- /* lower the submap flag to show the mm is gone */
- data->flags &= ~(PMEM_FLAGS_SUBMAP);
- }
- pmem_unlock_data_and_mm(data, mm);
- return -1;
- }
- *locked_mm = mm;
- return ret;
-}
-
-int pmem_remap(struct pmem_region *region, struct file *file,
- unsigned operation)
-{
- int ret;
- struct pmem_region_node *region_node;
- struct mm_struct *mm = NULL;
- struct list_head *elt, *elt2;
- int id = get_id(file);
- struct pmem_data *data = (struct pmem_data *)file->private_data;
-
- /* pmem region must be aligned on a page boundry */
- if (unlikely(!PMEM_IS_PAGE_ALIGNED(region->offset) ||
- !PMEM_IS_PAGE_ALIGNED(region->len))) {
-#if PMEM_DEBUG
- printk("pmem: request for unaligned pmem suballocation "
- "%lx %lx\n", region->offset, region->len);
-#endif
- return -EINVAL;
- }
-
- /* if userspace requests a region of len 0, there's nothing to do */
- if (region->len == 0)
- return 0;
-
- /* lock the mm and data */
- ret = pmem_lock_data_and_mm(file, data, &mm);
- if (ret)
- return 0;
-
- /* only the owner of the master file can remap the client fds
- * that back in it */
- if (!is_master_owner(file)) {
-#if PMEM_DEBUG
- printk("pmem: remap requested from non-master process\n");
-#endif
- ret = -EINVAL;
- goto err;
- }
-
- /* check that the requested range is within the src allocation */
- if (unlikely((region->offset > pmem_len(id, data)) ||
- (region->len > pmem_len(id, data)) ||
- (region->offset + region->len > pmem_len(id, data)))) {
-#if PMEM_DEBUG
- printk(KERN_INFO "pmem: suballoc doesn't fit in src_file!\n");
-#endif
- ret = -EINVAL;
- goto err;
- }
-
- if (operation == PMEM_MAP) {
- region_node = kmalloc(sizeof(struct pmem_region_node),
- GFP_KERNEL);
- if (!region_node) {
- ret = -ENOMEM;
-#if PMEM_DEBUG
- printk(KERN_INFO "No space to allocate metadata!");
-#endif
- goto err;
- }
- region_node->region = *region;
- list_add(®ion_node->list, &data->region_list);
- } else if (operation == PMEM_UNMAP) {
- int found = 0;
- list_for_each_safe(elt, elt2, &data->region_list) {
- region_node = list_entry(elt, struct pmem_region_node,
- list);
- if (region->len == 0 ||
- (region_node->region.offset == region->offset &&
- region_node->region.len == region->len)) {
- list_del(elt);
- kfree(region_node);
- found = 1;
- }
- }
- if (!found) {
-#if PMEM_DEBUG
- printk("pmem: Unmap region does not map any mapped "
- "region!");
-#endif
- ret = -EINVAL;
- goto err;
- }
- }
-
- if (data->vma && PMEM_IS_SUBMAP(data)) {
- if (operation == PMEM_MAP)
- ret = pmem_remap_pfn_range(id, data->vma, data,
- region->offset, region->len);
- else if (operation == PMEM_UNMAP)
- ret = pmem_unmap_pfn_range(id, data->vma, data,
- region->offset, region->len);
- }
-
-err:
- pmem_unlock_data_and_mm(data, mm);
- return ret;
-}
-
-static void pmem_revoke(struct file *file, struct pmem_data *data)
-{
- struct pmem_region_node *region_node;
- struct list_head *elt, *elt2;
- struct mm_struct *mm = NULL;
- int id = get_id(file);
- int ret = 0;
-
- data->master_file = NULL;
- ret = pmem_lock_data_and_mm(file, data, &mm);
- /* if lock_data_and_mm fails either the task that mapped the fd, or
- * the vma that mapped it have already gone away, nothing more
- * needs to be done */
- if (ret)
- return;
- /* unmap everything */
- /* delete the regions and region list nothing is mapped any more */
- if (data->vma)
- list_for_each_safe(elt, elt2, &data->region_list) {
- region_node = list_entry(elt, struct pmem_region_node,
- list);
- pmem_unmap_pfn_range(id, data->vma, data,
- region_node->region.offset,
- region_node->region.len);
- list_del(elt);
- kfree(region_node);
- }
- /* delete the master file */
- pmem_unlock_data_and_mm(data, mm);
-}
-
-static void pmem_get_size(struct pmem_region *region, struct file *file)
-{
- struct pmem_data *data = (struct pmem_data *)file->private_data;
- int id = get_id(file);
-
- if (!has_allocation(file)) {
- region->offset = 0;
- region->len = 0;
- return;
- } else {
- region->offset = pmem_start_addr(id, data);
- region->len = pmem_len(id, data);
- }
- DLOG("offset %lx len %lx\n", region->offset, region->len);
-}
-
-
-static long pmem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- struct pmem_data *data;
- int id = get_id(file);
-
- switch (cmd) {
- case PMEM_GET_PHYS:
- {
- struct pmem_region region;
- DLOG("get_phys\n");
- if (!has_allocation(file)) {
- region.offset = 0;
- region.len = 0;
- } else {
- data = (struct pmem_data *)file->private_data;
- region.offset = pmem_start_addr(id, data);
- region.len = pmem_len(id, data);
- }
- printk(KERN_INFO "pmem: request for physical address of pmem region "
- "from process %d.\n", current->pid);
- if (copy_to_user((void __user *)arg, ®ion,
- sizeof(struct pmem_region)))
- return -EFAULT;
- break;
- }
- case PMEM_MAP:
- {
- struct pmem_region region;
- if (copy_from_user(®ion, (void __user *)arg,
- sizeof(struct pmem_region)))
- return -EFAULT;
- data = (struct pmem_data *)file->private_data;
- return pmem_remap(®ion, file, PMEM_MAP);
- }
- break;
- case PMEM_UNMAP:
- {
- struct pmem_region region;
- if (copy_from_user(®ion, (void __user *)arg,
- sizeof(struct pmem_region)))
- return -EFAULT;
- data = (struct pmem_data *)file->private_data;
- return pmem_remap(®ion, file, PMEM_UNMAP);
- break;
- }
- case PMEM_GET_SIZE:
- {
- struct pmem_region region;
- DLOG("get_size\n");
- pmem_get_size(®ion, file);
- if (copy_to_user((void __user *)arg, ®ion,
- sizeof(struct pmem_region)))
- return -EFAULT;
- break;
- }
- case PMEM_GET_TOTAL_SIZE:
- {
- struct pmem_region region;
- DLOG("get total size\n");
- region.offset = 0;
- get_id(file);
- region.len = pmem[id].size;
- if (copy_to_user((void __user *)arg, ®ion,
- sizeof(struct pmem_region)))
- return -EFAULT;
- break;
- }
- case PMEM_ALLOCATE:
- {
- if (has_allocation(file))
- return -EINVAL;
- data = (struct pmem_data *)file->private_data;
- data->index = pmem_allocate(id, arg);
- break;
- }
- case PMEM_CONNECT:
- DLOG("connect\n");
- return pmem_connect(arg, file);
- break;
- case PMEM_CACHE_FLUSH:
- {
- struct pmem_region region;
- DLOG("flush\n");
- if (copy_from_user(®ion, (void __user *)arg,
- sizeof(struct pmem_region)))
- return -EFAULT;
- flush_pmem_file(file, region.offset, region.len);
- break;
- }
- default:
- if (pmem[id].ioctl)
- return pmem[id].ioctl(file, cmd, arg);
- return -EINVAL;
- }
- return 0;
-}
-
-#if PMEM_DEBUG
-static ssize_t debug_open(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
-
-static ssize_t debug_read(struct file *file, char __user *buf, size_t count,
- loff_t *ppos)
-{
- struct list_head *elt, *elt2;
- struct pmem_data *data;
- struct pmem_region_node *region_node;
- int id = (int)file->private_data;
- const int debug_bufmax = 4096;
- static char buffer[4096];
- int n = 0;
-
- DLOG("debug open\n");
- n = scnprintf(buffer, debug_bufmax,
- "pid #: mapped regions (offset, len) (offset,len)...\n");
-
- mutex_lock(&pmem[id].data_list_lock);
- list_for_each(elt, &pmem[id].data_list) {
- data = list_entry(elt, struct pmem_data, list);
- down_read(&data->sem);
- n += scnprintf(buffer + n, debug_bufmax - n, "pid %u:",
- data->pid);
- list_for_each(elt2, &data->region_list) {
- region_node = list_entry(elt2, struct pmem_region_node,
- list);
- n += scnprintf(buffer + n, debug_bufmax - n,
- "(%lx,%lx) ",
- region_node->region.offset,
- region_node->region.len);
- }
- n += scnprintf(buffer + n, debug_bufmax - n, "\n");
- up_read(&data->sem);
- }
- mutex_unlock(&pmem[id].data_list_lock);
-
- n++;
- buffer[n] = 0;
- return simple_read_from_buffer(buf, count, ppos, buffer, n);
-}
-
-static struct file_operations debug_fops = {
- .read = debug_read,
- .open = debug_open,
-};
-#endif
-
-#if 0
-static struct miscdevice pmem_dev = {
- .name = "pmem",
- .fops = &pmem_fops,
-};
-#endif
-
-int pmem_setup(struct android_pmem_platform_data *pdata,
- long (*ioctl)(struct file *, unsigned int, unsigned long),
- int (*release)(struct inode *, struct file *))
-{
- int err = 0;
- int i, index = 0;
- int id = id_count;
- id_count++;
-
- pmem[id].no_allocator = pdata->no_allocator;
- pmem[id].cached = pdata->cached;
- pmem[id].buffered = pdata->buffered;
- pmem[id].base = pdata->start;
- pmem[id].size = pdata->size;
- pmem[id].ioctl = ioctl;
- pmem[id].release = release;
- init_rwsem(&pmem[id].bitmap_sem);
- mutex_init(&pmem[id].data_list_lock);
- INIT_LIST_HEAD(&pmem[id].data_list);
- pmem[id].dev.name = pdata->name;
- pmem[id].dev.minor = id;
- pmem[id].dev.fops = &pmem_fops;
- printk(KERN_INFO "%s: %d init\n", pdata->name, pdata->cached);
-
- err = misc_register(&pmem[id].dev);
- if (err) {
- printk(KERN_ALERT "Unable to register pmem driver!\n");
- goto err_cant_register_device;
- }
- pmem[id].num_entries = pmem[id].size / PMEM_MIN_ALLOC;
-
- pmem[id].bitmap = kmalloc(pmem[id].num_entries *
- sizeof(struct pmem_bits), GFP_KERNEL);
- if (!pmem[id].bitmap)
- goto err_no_mem_for_metadata;
-
- memset(pmem[id].bitmap, 0, sizeof(struct pmem_bits) *
- pmem[id].num_entries);
-
- for (i = sizeof(pmem[id].num_entries) * 8 - 1; i >= 0; i--) {
- if ((pmem[id].num_entries) & 1<<i) {
- PMEM_ORDER(id, index) = i;
- index = PMEM_NEXT_INDEX(id, index);
- }
- }
-
- if (pmem[id].cached)
- pmem[id].vbase = ioremap_cached(pmem[id].base,
- pmem[id].size);
-#ifdef ioremap_ext_buffered
- else if (pmem[id].buffered)
- pmem[id].vbase = ioremap_ext_buffered(pmem[id].base,
- pmem[id].size);
-#endif
- else
- pmem[id].vbase = ioremap(pmem[id].base, pmem[id].size);
-
- if (pmem[id].vbase == 0)
- goto error_cant_remap;
-
- pmem[id].garbage_pfn = page_to_pfn(alloc_page(GFP_KERNEL));
- if (pmem[id].no_allocator)
- pmem[id].allocated = 0;
-
-#if PMEM_DEBUG
- debugfs_create_file(pdata->name, S_IFREG | S_IRUGO, NULL, (void *)id,
- &debug_fops);
-#endif
- return 0;
-error_cant_remap:
- kfree(pmem[id].bitmap);
-err_no_mem_for_metadata:
- misc_deregister(&pmem[id].dev);
-err_cant_register_device:
- return -1;
-}
-
-static int pmem_probe(struct platform_device *pdev)
-{
- struct android_pmem_platform_data *pdata;
-
- if (!pdev || !pdev->dev.platform_data) {
- printk(KERN_ALERT "Unable to probe pmem!\n");
- return -1;
- }
- pdata = pdev->dev.platform_data;
- return pmem_setup(pdata, NULL, NULL);
-}
-
-
-static int pmem_remove(struct platform_device *pdev)
-{
- int id = pdev->id;
- __free_page(pfn_to_page(pmem[id].garbage_pfn));
- misc_deregister(&pmem[id].dev);
- return 0;
-}
-
-static struct platform_driver pmem_driver = {
- .probe = pmem_probe,
- .remove = pmem_remove,
- .driver = { .name = "android_pmem" }
-};
-
-
-static int __init pmem_init(void)
-{
- return platform_driver_register(&pmem_driver);
-}
-
-static void __exit pmem_exit(void)
-{
- platform_driver_unregister(&pmem_driver);
-}
-
-module_init(pmem_init);
-module_exit(pmem_exit);
-
static int append_values(struct asus_oled_dev *odev, uint8_t val, size_t count)
{
- while (count-- > 0 && val) {
+ odev->last_val = val;
+
+ if (val == 0) {
+ odev->buf_offs += count;
+ return 0;
+ }
+
+ while (count-- > 0) {
size_t x = odev->buf_offs % odev->width;
size_t y = odev->buf_offs / odev->width;
size_t i;
;
}
- odev->last_val = val;
odev->buf_offs++;
}
static void __exit asus_oled_exit(void)
{
+ usb_deregister(&oled_driver);
class_remove_file(oled_class, &class_attr_version.attr);
class_destroy(oled_class);
-
- usb_deregister(&oled_driver);
}
module_init(asus_oled_init);
+++ /dev/null
-config DRM_PSB
- tristate "Intel GMA5/600 KMS Framebuffer"
- depends on DRM && PCI && X86 && BROKEN
- select FB_CFB_COPYAREA
- select FB_CFB_FILLRECT
- select FB_CFB_IMAGEBLIT
- select DRM_KMS_HELPER
- select DRM_TTM
- help
- Say yes for an experimental 2D KMS framebuffer driver for the
- Intel GMA500 ('Poulsbo') and other Intel IMG based graphics
- devices.
-
-config DRM_PSB_MRST
- bool "Intel GMA600 support (Experimental)"
- depends on DRM_PSB
- help
- Say yes to include support for GMA600 (Intel Moorestown/Oaktrail)
- platforms with LVDS ports. HDMI and MIPI are not currently
- supported.
-
-config DRM_PSB_MFLD
- bool "Intel Medfield support (Experimental)"
- depends on DRM_PSB
- help
- Say yes to include support for Intel Medfield platforms with MIPI
- interfaces.
-
-config DRM_PSB_CDV
- bool "Intel Cedarview support (Experimental)"
- depends on DRM_PSB
- help
- Say yes to include support for Intel Cedarview platforms
+++ /dev/null
-#
-# KMS driver for the GMA500
-#
-ccflags-y += -Iinclude/drm
-
-psb_gfx-y += gem_glue.o \
- accel_2d.o \
- backlight.o \
- framebuffer.o \
- gem.o \
- gtt.o \
- intel_bios.o \
- intel_i2c.o \
- intel_opregion.o \
- mmu.o \
- power.o \
- psb_drv.o \
- psb_intel_display.o \
- psb_intel_lvds.o \
- psb_intel_modes.o \
- psb_intel_sdvo.o \
- psb_lid.o \
- psb_irq.o \
- psb_device.o \
- mid_bios.o
-
-psb_gfx-$(CONFIG_DRM_PSB_CDV) += cdv_device.o \
- cdv_intel_crt.o \
- cdv_intel_display.o \
- cdv_intel_hdmi.o \
- cdv_intel_lvds.o
-
-psb_gfx-$(CONFIG_DRM_PSB_MRST) += mrst_device.o \
- mrst_crtc.o \
- mrst_lvds.o \
- mrst_hdmi.o \
- mrst_hdmi_i2c.o
-
-psb_gfx-$(CONFIG_DRM_PSB_MFLD) += mdfld_device.o \
- mdfld_output.o \
- mdfld_pyr_cmd.o \
- mdfld_tmd_vid.o \
- mdfld_tpo_cmd.o \
- mdfld_tpo_vid.o \
- mdfld_dsi_pkg_sender.o \
- mdfld_dsi_dpi.o \
- mdfld_dsi_output.o \
- mdfld_dsi_dbi.o \
- mdfld_dsi_dbi_dpu.o \
- mdfld_intel_display.o
-
-obj-$(CONFIG_DRM_PSB) += psb_gfx.o
+++ /dev/null
-- Sort out the power management side. Not important for Poulsbo but
- matters for Moorestown/Medfield
-- Debug Oaktrail/Moorestown support (single pipe, no BIOS on mrst,
- some other differences)
-- Add 2D acceleration via console and DRM
-- Add scrolling acceleration using the GTT to do remapping on the main
- framebuffer.
-- HDMI testing
-- Oaktrail HDMI and other features
-- Oaktrail MIPI
-- Medfield needs a lot of further love
-
-As per kernel policy and the in the interest of the safety of various
-kittens there is no support or plans to add hooks for the closed user space
-stuff.
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2007-2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
- * develop this driver.
- *
- **************************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/console.h>
-
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include <drm/drm_crtc.h>
-
-#include "psb_drv.h"
-#include "psb_reg.h"
-#include "framebuffer.h"
-
-/**
- * psb_spank - reset the 2D engine
- * @dev_priv: our PSB DRM device
- *
- * Soft reset the graphics engine and then reload the necessary registers.
- * We use this at initialisation time but it will become relevant for
- * accelerated X later
- */
-void psb_spank(struct drm_psb_private *dev_priv)
-{
- PSB_WSGX32(_PSB_CS_RESET_BIF_RESET | _PSB_CS_RESET_DPM_RESET |
- _PSB_CS_RESET_TA_RESET | _PSB_CS_RESET_USE_RESET |
- _PSB_CS_RESET_ISP_RESET | _PSB_CS_RESET_TSP_RESET |
- _PSB_CS_RESET_TWOD_RESET, PSB_CR_SOFT_RESET);
- PSB_RSGX32(PSB_CR_SOFT_RESET);
-
- msleep(1);
-
- PSB_WSGX32(0, PSB_CR_SOFT_RESET);
- wmb();
- PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) | _PSB_CB_CTRL_CLEAR_FAULT,
- PSB_CR_BIF_CTRL);
- wmb();
- (void) PSB_RSGX32(PSB_CR_BIF_CTRL);
-
- msleep(1);
- PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) & ~_PSB_CB_CTRL_CLEAR_FAULT,
- PSB_CR_BIF_CTRL);
- (void) PSB_RSGX32(PSB_CR_BIF_CTRL);
- PSB_WSGX32(dev_priv->gtt.gatt_start, PSB_CR_BIF_TWOD_REQ_BASE);
-}
-
-/**
- * psb2_2d_wait_available - wait for FIFO room
- * @dev_priv: our DRM device
- * @size: size (in dwords) of the command we want to issue
- *
- * Wait until there is room to load the FIFO with our data. If the
- * device is not responding then reset it
- */
-static int psb_2d_wait_available(struct drm_psb_private *dev_priv,
- unsigned size)
-{
- uint32_t avail = PSB_RSGX32(PSB_CR_2D_SOCIF);
- unsigned long t = jiffies + HZ;
-
- while (avail < size) {
- avail = PSB_RSGX32(PSB_CR_2D_SOCIF);
- if (time_after(jiffies, t)) {
- psb_spank(dev_priv);
- return -EIO;
- }
- }
- return 0;
-}
-
-/**
- * psb_2d_submit - submit a 2D command
- * @dev_priv: our DRM device
- * @cmdbuf: command to issue
- * @size: length (in dwords)
- *
- * Issue one or more 2D commands to the accelerator. This needs to be
- * serialized later when we add the GEM interfaces for acceleration
- */
-static int psbfb_2d_submit(struct drm_psb_private *dev_priv, uint32_t *cmdbuf,
- unsigned size)
-{
- int ret = 0;
- int i;
- unsigned submit_size;
- unsigned long flags;
-
- spin_lock_irqsave(&dev_priv->lock_2d, flags);
- while (size > 0) {
- submit_size = (size < 0x60) ? size : 0x60;
- size -= submit_size;
- ret = psb_2d_wait_available(dev_priv, submit_size);
- if (ret)
- break;
-
- submit_size <<= 2;
-
- for (i = 0; i < submit_size; i += 4)
- PSB_WSGX32(*cmdbuf++, PSB_SGX_2D_SLAVE_PORT + i);
-
- (void)PSB_RSGX32(PSB_SGX_2D_SLAVE_PORT + i - 4);
- }
- spin_unlock_irqrestore(&dev_priv->lock_2d, flags);
- return ret;
-}
-
-
-/**
- * psb_accel_2d_copy_direction - compute blit order
- * @xdir: X direction of move
- * @ydir: Y direction of move
- *
- * Compute the correct order setings to ensure that an overlapping blit
- * correctly copies all the pixels.
- */
-static u32 psb_accel_2d_copy_direction(int xdir, int ydir)
-{
- if (xdir < 0)
- return (ydir < 0) ? PSB_2D_COPYORDER_BR2TL :
- PSB_2D_COPYORDER_TR2BL;
- else
- return (ydir < 0) ? PSB_2D_COPYORDER_BL2TR :
- PSB_2D_COPYORDER_TL2BR;
-}
-
-/**
- * psb_accel_2d_copy - accelerated 2D copy
- * @dev_priv: our DRM device
- * @src_offset in bytes
- * @src_stride in bytes
- * @src_format psb 2D format defines
- * @dst_offset in bytes
- * @dst_stride in bytes
- * @dst_format psb 2D format defines
- * @src_x offset in pixels
- * @src_y offset in pixels
- * @dst_x offset in pixels
- * @dst_y offset in pixels
- * @size_x of the copied area
- * @size_y of the copied area
- *
- * Format and issue a 2D accelerated copy command.
- */
-static int psb_accel_2d_copy(struct drm_psb_private *dev_priv,
- uint32_t src_offset, uint32_t src_stride,
- uint32_t src_format, uint32_t dst_offset,
- uint32_t dst_stride, uint32_t dst_format,
- uint16_t src_x, uint16_t src_y,
- uint16_t dst_x, uint16_t dst_y,
- uint16_t size_x, uint16_t size_y)
-{
- uint32_t blit_cmd;
- uint32_t buffer[10];
- uint32_t *buf;
- uint32_t direction;
-
- buf = buffer;
-
- direction =
- psb_accel_2d_copy_direction(src_x - dst_x, src_y - dst_y);
-
- if (direction == PSB_2D_COPYORDER_BR2TL ||
- direction == PSB_2D_COPYORDER_TR2BL) {
- src_x += size_x - 1;
- dst_x += size_x - 1;
- }
- if (direction == PSB_2D_COPYORDER_BR2TL ||
- direction == PSB_2D_COPYORDER_BL2TR) {
- src_y += size_y - 1;
- dst_y += size_y - 1;
- }
-
- blit_cmd =
- PSB_2D_BLIT_BH |
- PSB_2D_ROT_NONE |
- PSB_2D_DSTCK_DISABLE |
- PSB_2D_SRCCK_DISABLE |
- PSB_2D_USE_PAT | PSB_2D_ROP3_SRCCOPY | direction;
-
- *buf++ = PSB_2D_FENCE_BH;
- *buf++ =
- PSB_2D_DST_SURF_BH | dst_format | (dst_stride <<
- PSB_2D_DST_STRIDE_SHIFT);
- *buf++ = dst_offset;
- *buf++ =
- PSB_2D_SRC_SURF_BH | src_format | (src_stride <<
- PSB_2D_SRC_STRIDE_SHIFT);
- *buf++ = src_offset;
- *buf++ =
- PSB_2D_SRC_OFF_BH | (src_x << PSB_2D_SRCOFF_XSTART_SHIFT) |
- (src_y << PSB_2D_SRCOFF_YSTART_SHIFT);
- *buf++ = blit_cmd;
- *buf++ =
- (dst_x << PSB_2D_DST_XSTART_SHIFT) | (dst_y <<
- PSB_2D_DST_YSTART_SHIFT);
- *buf++ =
- (size_x << PSB_2D_DST_XSIZE_SHIFT) | (size_y <<
- PSB_2D_DST_YSIZE_SHIFT);
- *buf++ = PSB_2D_FLUSH_BH;
-
- return psbfb_2d_submit(dev_priv, buffer, buf - buffer);
-}
-
-/**
- * psbfb_copyarea_accel - copyarea acceleration for /dev/fb
- * @info: our framebuffer
- * @a: copyarea parameters from the framebuffer core
- *
- * Perform a 2D copy via the accelerator
- */
-static void psbfb_copyarea_accel(struct fb_info *info,
- const struct fb_copyarea *a)
-{
- struct psb_fbdev *fbdev = info->par;
- struct psb_framebuffer *psbfb = &fbdev->pfb;
- struct drm_device *dev = psbfb->base.dev;
- struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb;
- struct drm_psb_private *dev_priv = dev->dev_private;
- uint32_t offset;
- uint32_t stride;
- uint32_t src_format;
- uint32_t dst_format;
-
- if (!fb)
- return;
-
- offset = psbfb->gtt->offset;
- stride = fb->pitches[0];
-
- switch (fb->depth) {
- case 8:
- src_format = PSB_2D_SRC_332RGB;
- dst_format = PSB_2D_DST_332RGB;
- break;
- case 15:
- src_format = PSB_2D_SRC_555RGB;
- dst_format = PSB_2D_DST_555RGB;
- break;
- case 16:
- src_format = PSB_2D_SRC_565RGB;
- dst_format = PSB_2D_DST_565RGB;
- break;
- case 24:
- case 32:
- /* this is wrong but since we don't do blending its okay */
- src_format = PSB_2D_SRC_8888ARGB;
- dst_format = PSB_2D_DST_8888ARGB;
- break;
- default:
- /* software fallback */
- cfb_copyarea(info, a);
- return;
- }
-
- if (!gma_power_begin(dev, false)) {
- cfb_copyarea(info, a);
- return;
- }
- psb_accel_2d_copy(dev_priv,
- offset, stride, src_format,
- offset, stride, dst_format,
- a->sx, a->sy, a->dx, a->dy, a->width, a->height);
- gma_power_end(dev);
-}
-
-/**
- * psbfb_copyarea - 2D copy interface
- * @info: our framebuffer
- * @region: region to copy
- *
- * Copy an area of the framebuffer console either by the accelerator
- * or directly using the cfb helpers according to the request
- */
-void psbfb_copyarea(struct fb_info *info,
- const struct fb_copyarea *region)
-{
- if (unlikely(info->state != FBINFO_STATE_RUNNING))
- return;
-
- /* Avoid the 8 pixel erratum */
- if (region->width == 8 || region->height == 8 ||
- (info->flags & FBINFO_HWACCEL_DISABLED))
- return cfb_copyarea(info, region);
-
- psbfb_copyarea_accel(info, region);
-}
-
-/**
- * psbfb_sync - synchronize 2D
- * @info: our framebuffer
- *
- * Wait for the 2D engine to quiesce so that we can do CPU
- * access to the framebuffer again
- */
-int psbfb_sync(struct fb_info *info)
-{
- struct psb_fbdev *fbdev = info->par;
- struct psb_framebuffer *psbfb = &fbdev->pfb;
- struct drm_device *dev = psbfb->base.dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- unsigned long _end = jiffies + DRM_HZ;
- int busy = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&dev_priv->lock_2d, flags);
- /*
- * First idle the 2D engine.
- */
-
- if ((PSB_RSGX32(PSB_CR_2D_SOCIF) == _PSB_C2_SOCIF_EMPTY) &&
- ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) & _PSB_C2B_STATUS_BUSY) == 0))
- goto out;
-
- do {
- busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY);
- cpu_relax();
- } while (busy && !time_after_eq(jiffies, _end));
-
- if (busy)
- busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY);
- if (busy)
- goto out;
-
- do {
- busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) &
- _PSB_C2B_STATUS_BUSY) != 0);
- cpu_relax();
- } while (busy && !time_after_eq(jiffies, _end));
- if (busy)
- busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) &
- _PSB_C2B_STATUS_BUSY) != 0);
-
-out:
- spin_unlock_irqrestore(&dev_priv->lock_2d, flags);
- return (busy) ? -EBUSY : 0;
-}
-
-int psb_accel_ioctl(struct drm_device *dev, void *data, struct drm_file *file)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct drm_psb_2d_op *op = data;
- u32 *op_ptr = &op->cmd[0];
- int i;
- struct drm_gem_object *obj;
- struct gtt_range *gtt;
- int err = -EINVAL;
-
- if (!dev_priv->ops->accel_2d)
- return -EOPNOTSUPP;
- if (op->size > PSB_2D_OP_BUFLEN)
- return -EINVAL;
-
- /* The GEM object being used. We need to support separate src/dst/etc
- in the end but for now keep them all the same */
- obj = drm_gem_object_lookup(dev, file, op->src);
- if (obj == NULL)
- return -ENOENT;
- gtt = container_of(obj, struct gtt_range, gem);
-
- if (psb_gtt_pin(gtt) < 0)
- goto bad_2;
- for (i = 0; i < op->size; i++, op_ptr++) {
- u32 r = *op_ptr & 0xF0000000;
- /* Fill in the GTT offsets for the command buffer */
- if (r == PSB_2D_SRC_SURF_BH ||
- r == PSB_2D_DST_SURF_BH ||
- r == PSB_2D_MASK_SURF_BH ||
- r == PSB_2D_PAT_SURF_BH) {
- i++;
- op_ptr++;
- if (i == op->size)
- goto bad;
- if (*op_ptr)
- goto bad;
- *op_ptr = gtt->offset;
- continue;
- }
- }
- psbfb_2d_submit(dev_priv, op->cmd, op->size);
- err = 0;
-bad:
- psb_gtt_unpin(gtt);
-bad_2:
- drm_gem_object_unreference(obj);
- return err;
-}
+++ /dev/null
-/*
- * GMA500 Backlight Interface
- *
- * Copyright (c) 2009-2011, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors: Eric Knopp
- *
- */
-
-#include "psb_drv.h"
-#include "psb_intel_reg.h"
-#include "psb_intel_drv.h"
-#include "intel_bios.h"
-#include "power.h"
-
-int gma_backlight_init(struct drm_device *dev)
-{
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- struct drm_psb_private *dev_priv = dev->dev_private;
- return dev_priv->ops->backlight_init(dev);
-#else
- return 0;
-#endif
-}
-
-void gma_backlight_exit(struct drm_device *dev)
-{
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- struct drm_psb_private *dev_priv = dev->dev_private;
- if (dev_priv->backlight_device) {
- dev_priv->backlight_device->props.brightness = 0;
- backlight_update_status(dev_priv->backlight_device);
- backlight_device_unregister(dev_priv->backlight_device);
- }
-#endif
-}
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-#include <linux/backlight.h>
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include "psb_drm.h"
-#include "psb_drv.h"
-#include "psb_reg.h"
-#include "psb_intel_reg.h"
-#include "intel_bios.h"
-#include "cdv_device.h"
-
-#define VGA_SR_INDEX 0x3c4
-#define VGA_SR_DATA 0x3c5
-
-static void cdv_disable_vga(struct drm_device *dev)
-{
- u8 sr1;
- u32 vga_reg;
-
- vga_reg = VGACNTRL;
-
- outb(1, VGA_SR_INDEX);
- sr1 = inb(VGA_SR_DATA);
- outb(sr1 | 1<<5, VGA_SR_DATA);
- udelay(300);
-
- REG_WRITE(vga_reg, VGA_DISP_DISABLE);
- REG_READ(vga_reg);
-}
-
-static int cdv_output_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- cdv_disable_vga(dev);
-
- cdv_intel_crt_init(dev, &dev_priv->mode_dev);
- cdv_intel_lvds_init(dev, &dev_priv->mode_dev);
-
- /* These bits indicate HDMI not SDVO on CDV, but we don't yet support
- the HDMI interface */
- if (REG_READ(SDVOB) & SDVO_DETECTED)
- cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB);
- if (REG_READ(SDVOC) & SDVO_DETECTED)
- cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC);
- return 0;
-}
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-
-/*
- * Poulsbo Backlight Interfaces
- */
-
-#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */
-#define BLC_PWM_FREQ_CALC_CONSTANT 32
-#define MHz 1000000
-
-#define PSB_BLC_PWM_PRECISION_FACTOR 10
-#define PSB_BLC_MAX_PWM_REG_FREQ 0xFFFE
-#define PSB_BLC_MIN_PWM_REG_FREQ 0x2
-
-#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
-#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16)
-
-static int cdv_brightness;
-static struct backlight_device *cdv_backlight_device;
-
-static int cdv_get_brightness(struct backlight_device *bd)
-{
- /* return locally cached var instead of HW read (due to DPST etc.) */
- /* FIXME: ideally return actual value in case firmware fiddled with
- it */
- return cdv_brightness;
-}
-
-
-static int cdv_backlight_setup(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- unsigned long core_clock;
- /* u32 bl_max_freq; */
- /* unsigned long value; */
- u16 bl_max_freq;
- uint32_t value;
- uint32_t blc_pwm_precision_factor;
-
- /* get bl_max_freq and pol from dev_priv*/
- if (!dev_priv->lvds_bl) {
- dev_err(dev->dev, "Has no valid LVDS backlight info\n");
- return -ENOENT;
- }
- bl_max_freq = dev_priv->lvds_bl->freq;
- blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
-
- core_clock = dev_priv->core_freq;
-
- value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
- value *= blc_pwm_precision_factor;
- value /= bl_max_freq;
- value /= blc_pwm_precision_factor;
-
- if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
- value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
- return -ERANGE;
- else {
- /* FIXME */
- }
- return 0;
-}
-
-static int cdv_set_brightness(struct backlight_device *bd)
-{
- int level = bd->props.brightness;
-
- /* Percentage 1-100% being valid */
- if (level < 1)
- level = 1;
-
- /*cdv_intel_lvds_set_brightness(dev, level); FIXME */
- cdv_brightness = level;
- return 0;
-}
-
-static const struct backlight_ops cdv_ops = {
- .get_brightness = cdv_get_brightness,
- .update_status = cdv_set_brightness,
-};
-
-static int cdv_backlight_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- int ret;
- struct backlight_properties props;
-
- memset(&props, 0, sizeof(struct backlight_properties));
- props.max_brightness = 100;
- props.type = BACKLIGHT_PLATFORM;
-
- cdv_backlight_device = backlight_device_register("psb-bl",
- NULL, (void *)dev, &cdv_ops, &props);
- if (IS_ERR(cdv_backlight_device))
- return PTR_ERR(cdv_backlight_device);
-
- ret = cdv_backlight_setup(dev);
- if (ret < 0) {
- backlight_device_unregister(cdv_backlight_device);
- cdv_backlight_device = NULL;
- return ret;
- }
- cdv_backlight_device->props.brightness = 100;
- cdv_backlight_device->props.max_brightness = 100;
- backlight_update_status(cdv_backlight_device);
- dev_priv->backlight_device = cdv_backlight_device;
- return 0;
-}
-
-#endif
-
-/*
- * Provide the Cedarview specific chip logic and low level methods
- * for power management
- *
- * FIXME: we need to implement the apm/ospm base management bits
- * for this and the MID devices.
- */
-
-static inline u32 CDV_MSG_READ32(uint port, uint offset)
-{
- int mcr = (0x10<<24) | (port << 16) | (offset << 8);
- uint32_t ret_val = 0;
- struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
- pci_write_config_dword(pci_root, 0xD0, mcr);
- pci_read_config_dword(pci_root, 0xD4, &ret_val);
- pci_dev_put(pci_root);
- return ret_val;
-}
-
-static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value)
-{
- int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
- struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
- pci_write_config_dword(pci_root, 0xD4, value);
- pci_write_config_dword(pci_root, 0xD0, mcr);
- pci_dev_put(pci_root);
-}
-
-#define PSB_APM_CMD 0x0
-#define PSB_APM_STS 0x04
-#define PSB_PM_SSC 0x20
-#define PSB_PM_SSS 0x30
-#define PSB_PWRGT_GFX_MASK 0x3
-#define CDV_PWRGT_DISPLAY_CNTR 0x000fc00c
-#define CDV_PWRGT_DISPLAY_STS 0x000fc00c
-
-static void cdv_init_pm(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 pwr_cnt;
- int i;
-
- dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
- PSB_APMBA) & 0xFFFF;
- dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
- PSB_OSPMBA) & 0xFFFF;
-
- /* Force power on for now */
- pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
- pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
-
- outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
- for (i = 0; i < 5; i++) {
- u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
- if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0)
- break;
- udelay(10);
- }
- pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
- pwr_cnt &= ~CDV_PWRGT_DISPLAY_CNTR;
- outl(pwr_cnt, dev_priv->ospm_base + PSB_PM_SSC);
- for (i = 0; i < 5; i++) {
- u32 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
- if ((pwr_sts & CDV_PWRGT_DISPLAY_STS) == 0)
- break;
- udelay(10);
- }
-}
-
-/**
- * cdv_save_display_registers - save registers lost on suspend
- * @dev: our DRM device
- *
- * Save the state we need in order to be able to restore the interface
- * upon resume from suspend
- *
- * FIXME: review
- */
-static int cdv_save_display_registers(struct drm_device *dev)
-{
- return 0;
-}
-
-/**
- * cdv_restore_display_registers - restore lost register state
- * @dev: our DRM device
- *
- * Restore register state that was lost during suspend and resume.
- *
- * FIXME: review
- */
-static int cdv_restore_display_registers(struct drm_device *dev)
-{
- return 0;
-}
-
-static int cdv_power_down(struct drm_device *dev)
-{
- return 0;
-}
-
-static int cdv_power_up(struct drm_device *dev)
-{
- return 0;
-}
-
-/* FIXME ? - shared with Poulsbo */
-static void cdv_get_core_freq(struct drm_device *dev)
-{
- uint32_t clock;
- struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
- pci_read_config_dword(pci_root, 0xD4, &clock);
- pci_dev_put(pci_root);
-
- switch (clock & 0x07) {
- case 0:
- dev_priv->core_freq = 100;
- break;
- case 1:
- dev_priv->core_freq = 133;
- break;
- case 2:
- dev_priv->core_freq = 150;
- break;
- case 3:
- dev_priv->core_freq = 178;
- break;
- case 4:
- dev_priv->core_freq = 200;
- break;
- case 5:
- case 6:
- case 7:
- dev_priv->core_freq = 266;
- default:
- dev_priv->core_freq = 0;
- }
-}
-
-static int cdv_chip_setup(struct drm_device *dev)
-{
- cdv_get_core_freq(dev);
- gma_intel_opregion_init(dev);
- psb_intel_init_bios(dev);
- return 0;
-}
-
-/* CDV is much like Poulsbo but has MID like SGX offsets and PM */
-
-const struct psb_ops cdv_chip_ops = {
- .name = "Cedartrail",
- .accel_2d = 0,
- .pipes = 2,
- .sgx_offset = MRST_SGX_OFFSET,
- .chip_setup = cdv_chip_setup,
-
- .crtc_helper = &cdv_intel_helper_funcs,
- .crtc_funcs = &cdv_intel_crtc_funcs,
-
- .output_init = cdv_output_init,
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- .backlight_init = cdv_backlight_init,
-#endif
-
- .init_pm = cdv_init_pm,
- .save_regs = cdv_save_display_registers,
- .restore_regs = cdv_restore_display_registers,
- .power_down = cdv_power_down,
- .power_up = cdv_power_up,
-};
+++ /dev/null
-/*
- * Copyright © 2011 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-extern const struct drm_crtc_helper_funcs cdv_intel_helper_funcs;
-extern const struct drm_crtc_funcs cdv_intel_crtc_funcs;
-extern void cdv_intel_crt_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev);
-extern void cdv_intel_lvds_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev);
-extern void cdv_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev,
- int reg);
-extern struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
- struct drm_crtc *crtc);
-
-extern inline void cdv_intel_wait_for_vblank(struct drm_device *dev)
-{
- /* Wait for 20ms, i.e. one cycle at 50hz. */
- /* FIXME: msleep ?? */
- mdelay(20);
-}
-
-
+++ /dev/null
-/*
- * Copyright © 2006-2007 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- */
-
-#include <linux/i2c.h>
-#include <drm/drmP.h>
-
-#include "intel_bios.h"
-#include "psb_drv.h"
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "power.h"
-#include <linux/pm_runtime.h>
-
-
-static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode)
-{
- struct drm_device *dev = encoder->dev;
- u32 temp, reg;
- reg = ADPA;
-
- temp = REG_READ(reg);
- temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
- temp &= ~ADPA_DAC_ENABLE;
-
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- temp |= ADPA_DAC_ENABLE;
- break;
- case DRM_MODE_DPMS_STANDBY:
- temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
- break;
- case DRM_MODE_DPMS_SUSPEND:
- temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
- break;
- case DRM_MODE_DPMS_OFF:
- temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
- break;
- }
-
- REG_WRITE(reg, temp);
-}
-
-static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- int max_clock = 0;
- if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
- return MODE_NO_DBLESCAN;
-
- /* The lowest clock for CDV is 20000KHz */
- if (mode->clock < 20000)
- return MODE_CLOCK_LOW;
-
- /* The max clock for CDV is 355 instead of 400 */
- max_clock = 355000;
- if (mode->clock > max_clock)
- return MODE_CLOCK_HIGH;
-
- if (mode->hdisplay > 1680 || mode->vdisplay > 1050)
- return MODE_PANEL;
-
- return MODE_OK;
-}
-
-static bool cdv_intel_crt_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- return true;
-}
-
-static void cdv_intel_crt_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
-
- struct drm_device *dev = encoder->dev;
- struct drm_crtc *crtc = encoder->crtc;
- struct psb_intel_crtc *psb_intel_crtc =
- to_psb_intel_crtc(crtc);
- int dpll_md_reg;
- u32 adpa, dpll_md;
- u32 adpa_reg;
-
- if (psb_intel_crtc->pipe == 0)
- dpll_md_reg = DPLL_A_MD;
- else
- dpll_md_reg = DPLL_B_MD;
-
- adpa_reg = ADPA;
-
- /*
- * Disable separate mode multiplier used when cloning SDVO to CRT
- * XXX this needs to be adjusted when we really are cloning
- */
- {
- dpll_md = REG_READ(dpll_md_reg);
- REG_WRITE(dpll_md_reg,
- dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
- }
-
- adpa = 0;
- if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
- adpa |= ADPA_HSYNC_ACTIVE_HIGH;
- if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
- adpa |= ADPA_VSYNC_ACTIVE_HIGH;
-
- if (psb_intel_crtc->pipe == 0)
- adpa |= ADPA_PIPE_A_SELECT;
- else
- adpa |= ADPA_PIPE_B_SELECT;
-
- REG_WRITE(adpa_reg, adpa);
-}
-
-
-/**
- * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
- *
- * \return true if CRT is connected.
- * \return false if CRT is disconnected.
- */
-static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
- bool force)
-{
- struct drm_device *dev = connector->dev;
- u32 hotplug_en;
- int i, tries = 0, ret = false;
- u32 adpa_orig;
-
- /* disable the DAC when doing the hotplug detection */
-
- adpa_orig = REG_READ(ADPA);
-
- REG_WRITE(ADPA, adpa_orig & ~(ADPA_DAC_ENABLE));
-
- /*
- * On a CDV thep, CRT detect sequence need to be done twice
- * to get a reliable result.
- */
- tries = 2;
-
- hotplug_en = REG_READ(PORT_HOTPLUG_EN);
- hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK);
- hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
-
- hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-
- for (i = 0; i < tries ; i++) {
- unsigned long timeout;
- /* turn on the FORCE_DETECT */
- REG_WRITE(PORT_HOTPLUG_EN, hotplug_en);
- timeout = jiffies + msecs_to_jiffies(1000);
- /* wait for FORCE_DETECT to go off */
- do {
- if (!(REG_READ(PORT_HOTPLUG_EN) &
- CRT_HOTPLUG_FORCE_DETECT))
- break;
- msleep(1);
- } while (time_after(timeout, jiffies));
- }
-
- if ((REG_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) !=
- CRT_HOTPLUG_MONITOR_NONE)
- ret = true;
-
- /* Restore the saved ADPA */
- REG_WRITE(ADPA, adpa_orig);
- return ret;
-}
-
-static enum drm_connector_status cdv_intel_crt_detect(
- struct drm_connector *connector, bool force)
-{
- if (cdv_intel_crt_detect_hotplug(connector, force))
- return connector_status_connected;
- else
- return connector_status_disconnected;
-}
-
-static void cdv_intel_crt_destroy(struct drm_connector *connector)
-{
- struct psb_intel_output *intel_output = to_psb_intel_output(connector);
-
- psb_intel_i2c_destroy(intel_output->ddc_bus);
- drm_sysfs_connector_remove(connector);
- drm_connector_cleanup(connector);
- kfree(connector);
-}
-
-static int cdv_intel_crt_get_modes(struct drm_connector *connector)
-{
- struct psb_intel_output *intel_output =
- to_psb_intel_output(connector);
- return psb_intel_ddc_get_modes(intel_output);
-}
-
-static int cdv_intel_crt_set_property(struct drm_connector *connector,
- struct drm_property *property,
- uint64_t value)
-{
- return 0;
-}
-
-/*
- * Routines for controlling stuff on the analog port
- */
-
-static const struct drm_encoder_helper_funcs cdv_intel_crt_helper_funcs = {
- .dpms = cdv_intel_crt_dpms,
- .mode_fixup = cdv_intel_crt_mode_fixup,
- .prepare = psb_intel_encoder_prepare,
- .commit = psb_intel_encoder_commit,
- .mode_set = cdv_intel_crt_mode_set,
-};
-
-static const struct drm_connector_funcs cdv_intel_crt_connector_funcs = {
- .dpms = drm_helper_connector_dpms,
- .detect = cdv_intel_crt_detect,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .destroy = cdv_intel_crt_destroy,
- .set_property = cdv_intel_crt_set_property,
-};
-
-static const struct drm_connector_helper_funcs
- cdv_intel_crt_connector_helper_funcs = {
- .mode_valid = cdv_intel_crt_mode_valid,
- .get_modes = cdv_intel_crt_get_modes,
- .best_encoder = psb_intel_best_encoder,
-};
-
-static void cdv_intel_crt_enc_destroy(struct drm_encoder *encoder)
-{
- drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs cdv_intel_crt_enc_funcs = {
- .destroy = cdv_intel_crt_enc_destroy,
-};
-
-void cdv_intel_crt_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev)
-{
-
- struct psb_intel_output *psb_intel_output;
- struct drm_connector *connector;
- struct drm_encoder *encoder;
-
- u32 i2c_reg;
-
- psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
- if (!psb_intel_output)
- return;
-
- psb_intel_output->mode_dev = mode_dev;
- connector = &psb_intel_output->base;
- drm_connector_init(dev, connector,
- &cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
-
- encoder = &psb_intel_output->enc;
- drm_encoder_init(dev, encoder,
- &cdv_intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC);
-
- drm_mode_connector_attach_encoder(&psb_intel_output->base,
- &psb_intel_output->enc);
-
- /* Set up the DDC bus. */
- i2c_reg = GPIOA;
- /* Remove the following code for CDV */
- /*
- if (dev_priv->crt_ddc_bus != 0)
- i2c_reg = dev_priv->crt_ddc_bus;
- }*/
- psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
- i2c_reg, "CRTDDC_A");
- if (!psb_intel_output->ddc_bus) {
- dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
- "failed.\n");
- goto failed_ddc;
- }
-
- psb_intel_output->type = INTEL_OUTPUT_ANALOG;
- /*
- psb_intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT);
- psb_intel_output->crtc_mask = (1 << 0) | (1 << 1);
- */
- connector->interlace_allowed = 0;
- connector->doublescan_allowed = 0;
-
- drm_encoder_helper_add(encoder, &cdv_intel_crt_helper_funcs);
- drm_connector_helper_add(connector,
- &cdv_intel_crt_connector_helper_funcs);
-
- drm_sysfs_connector_add(connector);
-
- return;
-failed_ddc:
- drm_encoder_cleanup(&psb_intel_output->enc);
- drm_connector_cleanup(&psb_intel_output->base);
- kfree(psb_intel_output);
- return;
-}
+++ /dev/null
-/*
- * Copyright © 2006-2011 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- */
-
-#include <linux/i2c.h>
-#include <linux/pm_runtime.h>
-
-#include <drm/drmP.h>
-#include "framebuffer.h"
-#include "psb_drv.h"
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "psb_intel_display.h"
-#include "power.h"
-#include "cdv_device.h"
-
-
-struct cdv_intel_range_t {
- int min, max;
-};
-
-struct cdv_intel_p2_t {
- int dot_limit;
- int p2_slow, p2_fast;
-};
-
-struct cdv_intel_clock_t {
- /* given values */
- int n;
- int m1, m2;
- int p1, p2;
- /* derived values */
- int dot;
- int vco;
- int m;
- int p;
-};
-
-#define INTEL_P2_NUM 2
-
-struct cdv_intel_limit_t {
- struct cdv_intel_range_t dot, vco, n, m, m1, m2, p, p1;
- struct cdv_intel_p2_t p2;
-};
-
-#define CDV_LIMIT_SINGLE_LVDS_96 0
-#define CDV_LIMIT_SINGLE_LVDS_100 1
-#define CDV_LIMIT_DAC_HDMI_27 2
-#define CDV_LIMIT_DAC_HDMI_96 3
-
-static const struct cdv_intel_limit_t cdv_intel_limits[] = {
- { /* CDV_SIGNLE_LVDS_96MHz */
- .dot = {.min = 20000, .max = 115500},
- .vco = {.min = 1800000, .max = 3600000},
- .n = {.min = 2, .max = 6},
- .m = {.min = 60, .max = 160},
- .m1 = {.min = 0, .max = 0},
- .m2 = {.min = 58, .max = 158},
- .p = {.min = 28, .max = 140},
- .p1 = {.min = 2, .max = 10},
- .p2 = {.dot_limit = 200000,
- .p2_slow = 14, .p2_fast = 14},
- },
- { /* CDV_SINGLE_LVDS_100MHz */
- .dot = {.min = 20000, .max = 115500},
- .vco = {.min = 1800000, .max = 3600000},
- .n = {.min = 2, .max = 6},
- .m = {.min = 60, .max = 160},
- .m1 = {.min = 0, .max = 0},
- .m2 = {.min = 58, .max = 158},
- .p = {.min = 28, .max = 140},
- .p1 = {.min = 2, .max = 10},
- /* The single-channel range is 25-112Mhz, and dual-channel
- * is 80-224Mhz. Prefer single channel as much as possible.
- */
- .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14},
- },
- { /* CDV_DAC_HDMI_27MHz */
- .dot = {.min = 20000, .max = 400000},
- .vco = {.min = 1809000, .max = 3564000},
- .n = {.min = 1, .max = 1},
- .m = {.min = 67, .max = 132},
- .m1 = {.min = 0, .max = 0},
- .m2 = {.min = 65, .max = 130},
- .p = {.min = 5, .max = 90},
- .p1 = {.min = 1, .max = 9},
- .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
- },
- { /* CDV_DAC_HDMI_96MHz */
- .dot = {.min = 20000, .max = 400000},
- .vco = {.min = 1800000, .max = 3600000},
- .n = {.min = 2, .max = 6},
- .m = {.min = 60, .max = 160},
- .m1 = {.min = 0, .max = 0},
- .m2 = {.min = 58, .max = 158},
- .p = {.min = 5, .max = 100},
- .p1 = {.min = 1, .max = 10},
- .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
- },
-};
-
-#define _wait_for(COND, MS, W) ({ \
- unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
- int ret__ = 0; \
- while (!(COND)) { \
- if (time_after(jiffies, timeout__)) { \
- ret__ = -ETIMEDOUT; \
- break; \
- } \
- if (W && !in_dbg_master()) \
- msleep(W); \
- } \
- ret__; \
-})
-
-#define wait_for(COND, MS) _wait_for(COND, MS, 1)
-
-
-static int cdv_sb_read(struct drm_device *dev, u32 reg, u32 *val)
-{
- int ret;
-
- ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
- if (ret) {
- DRM_ERROR("timeout waiting for SB to idle before read\n");
- return ret;
- }
-
- REG_WRITE(SB_ADDR, reg);
- REG_WRITE(SB_PCKT,
- SET_FIELD(SB_OPCODE_READ, SB_OPCODE) |
- SET_FIELD(SB_DEST_DPLL, SB_DEST) |
- SET_FIELD(0xf, SB_BYTE_ENABLE));
-
- ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
- if (ret) {
- DRM_ERROR("timeout waiting for SB to idle after read\n");
- return ret;
- }
-
- *val = REG_READ(SB_DATA);
-
- return 0;
-}
-
-static int cdv_sb_write(struct drm_device *dev, u32 reg, u32 val)
-{
- int ret;
- static bool dpio_debug = true;
- u32 temp;
-
- if (dpio_debug) {
- if (cdv_sb_read(dev, reg, &temp) == 0)
- DRM_DEBUG_KMS("0x%08x: 0x%08x (before)\n", reg, temp);
- DRM_DEBUG_KMS("0x%08x: 0x%08x\n", reg, val);
- }
-
- ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
- if (ret) {
- DRM_ERROR("timeout waiting for SB to idle before write\n");
- return ret;
- }
-
- REG_WRITE(SB_ADDR, reg);
- REG_WRITE(SB_DATA, val);
- REG_WRITE(SB_PCKT,
- SET_FIELD(SB_OPCODE_WRITE, SB_OPCODE) |
- SET_FIELD(SB_DEST_DPLL, SB_DEST) |
- SET_FIELD(0xf, SB_BYTE_ENABLE));
-
- ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
- if (ret) {
- DRM_ERROR("timeout waiting for SB to idle after write\n");
- return ret;
- }
-
- if (dpio_debug) {
- if (cdv_sb_read(dev, reg, &temp) == 0)
- DRM_DEBUG_KMS("0x%08x: 0x%08x (after)\n", reg, temp);
- }
-
- return 0;
-}
-
-/* Reset the DPIO configuration register. The BIOS does this at every
- * mode set.
- */
-static void cdv_sb_reset(struct drm_device *dev)
-{
-
- REG_WRITE(DPIO_CFG, 0);
- REG_READ(DPIO_CFG);
- REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N);
-}
-
-/* Unlike most Intel display engines, on Cedarview the DPLL registers
- * are behind this sideband bus. They must be programmed while the
- * DPLL reference clock is on in the DPLL control register, but before
- * the DPLL is enabled in the DPLL control register.
- */
-static int
-cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
- struct cdv_intel_clock_t *clock)
-{
- struct psb_intel_crtc *psb_crtc =
- to_psb_intel_crtc(crtc);
- int pipe = psb_crtc->pipe;
- u32 m, n_vco, p;
- int ret = 0;
- int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
- u32 ref_value;
-
- cdv_sb_reset(dev);
-
- if ((REG_READ(dpll_reg) & DPLL_SYNCLOCK_ENABLE) == 0) {
- DRM_ERROR("Attempting to set DPLL with refclk disabled\n");
- return -EBUSY;
- }
-
- /* Follow the BIOS and write the REF/SFR Register. Hardcoded value */
- ref_value = 0x68A701;
-
- cdv_sb_write(dev, SB_REF_SFR(pipe), ref_value);
-
- /* We don't know what the other fields of these regs are, so
- * leave them in place.
- */
- ret = cdv_sb_read(dev, SB_M(pipe), &m);
- if (ret)
- return ret;
- m &= ~SB_M_DIVIDER_MASK;
- m |= ((clock->m2) << SB_M_DIVIDER_SHIFT);
- ret = cdv_sb_write(dev, SB_M(pipe), m);
- if (ret)
- return ret;
-
- ret = cdv_sb_read(dev, SB_N_VCO(pipe), &n_vco);
- if (ret)
- return ret;
-
- /* Follow the BIOS to program the N_DIVIDER REG */
- n_vco &= 0xFFFF;
- n_vco |= 0x107;
- n_vco &= ~(SB_N_VCO_SEL_MASK |
- SB_N_DIVIDER_MASK |
- SB_N_CB_TUNE_MASK);
-
- n_vco |= ((clock->n) << SB_N_DIVIDER_SHIFT);
-
- if (clock->vco < 2250000) {
- n_vco |= (2 << SB_N_CB_TUNE_SHIFT);
- n_vco |= (0 << SB_N_VCO_SEL_SHIFT);
- } else if (clock->vco < 2750000) {
- n_vco |= (1 << SB_N_CB_TUNE_SHIFT);
- n_vco |= (1 << SB_N_VCO_SEL_SHIFT);
- } else if (clock->vco < 3300000) {
- n_vco |= (0 << SB_N_CB_TUNE_SHIFT);
- n_vco |= (2 << SB_N_VCO_SEL_SHIFT);
- } else {
- n_vco |= (0 << SB_N_CB_TUNE_SHIFT);
- n_vco |= (3 << SB_N_VCO_SEL_SHIFT);
- }
-
- ret = cdv_sb_write(dev, SB_N_VCO(pipe), n_vco);
- if (ret)
- return ret;
-
- ret = cdv_sb_read(dev, SB_P(pipe), &p);
- if (ret)
- return ret;
- p &= ~(SB_P2_DIVIDER_MASK | SB_P1_DIVIDER_MASK);
- p |= SET_FIELD(clock->p1, SB_P1_DIVIDER);
- switch (clock->p2) {
- case 5:
- p |= SET_FIELD(SB_P2_5, SB_P2_DIVIDER);
- break;
- case 10:
- p |= SET_FIELD(SB_P2_10, SB_P2_DIVIDER);
- break;
- case 14:
- p |= SET_FIELD(SB_P2_14, SB_P2_DIVIDER);
- break;
- case 7:
- p |= SET_FIELD(SB_P2_7, SB_P2_DIVIDER);
- break;
- default:
- DRM_ERROR("Bad P2 clock: %d\n", clock->p2);
- return -EINVAL;
- }
- ret = cdv_sb_write(dev, SB_P(pipe), p);
- if (ret)
- return ret;
-
- /* always Program the Lane Register for the Pipe A*/
- if (pipe == 0) {
- /* Program the Lane0/1 for HDMI B */
- u32 lane_reg, lane_value;
-
- lane_reg = PSB_LANE0;
- cdv_sb_read(dev, lane_reg, &lane_value);
- lane_value &= ~(LANE_PLL_MASK);
- lane_value |= LANE_PLL_ENABLE;
- cdv_sb_write(dev, lane_reg, lane_value);
-
- lane_reg = PSB_LANE1;
- cdv_sb_read(dev, lane_reg, &lane_value);
- lane_value &= ~(LANE_PLL_MASK);
- lane_value |= LANE_PLL_ENABLE;
- cdv_sb_write(dev, lane_reg, lane_value);
-
- /* Program the Lane2/3 for HDMI C */
- lane_reg = PSB_LANE2;
- cdv_sb_read(dev, lane_reg, &lane_value);
- lane_value &= ~(LANE_PLL_MASK);
- lane_value |= LANE_PLL_ENABLE;
- cdv_sb_write(dev, lane_reg, lane_value);
-
- lane_reg = PSB_LANE3;
- cdv_sb_read(dev, lane_reg, &lane_value);
- lane_value &= ~(LANE_PLL_MASK);
- lane_value |= LANE_PLL_ENABLE;
- cdv_sb_write(dev, lane_reg, lane_value);
- }
-
- return 0;
-}
-
-/*
- * Returns whether any output on the specified pipe is of the specified type
- */
-bool cdv_intel_pipe_has_type(struct drm_crtc *crtc, int type)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_mode_config *mode_config = &dev->mode_config;
- struct drm_connector *l_entry;
-
- list_for_each_entry(l_entry, &mode_config->connector_list, head) {
- if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(l_entry);
- if (psb_intel_output->type == type)
- return true;
- }
- }
- return false;
-}
-
-static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc,
- int refclk)
-{
- const struct cdv_intel_limit_t *limit;
- if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- /*
- * Now only single-channel LVDS is supported on CDV. If it is
- * incorrect, please add the dual-channel LVDS.
- */
- if (refclk == 96000)
- limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96];
- else
- limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100];
- } else {
- if (refclk == 27000)
- limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_27];
- else
- limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_96];
- }
- return limit;
-}
-
-/* m1 is reserved as 0 in CDV, n is a ring counter */
-static void cdv_intel_clock(struct drm_device *dev,
- int refclk, struct cdv_intel_clock_t *clock)
-{
- clock->m = clock->m2 + 2;
- clock->p = clock->p1 * clock->p2;
- clock->vco = (refclk * clock->m) / clock->n;
- clock->dot = clock->vco / clock->p;
-}
-
-
-#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; }
-static bool cdv_intel_PLL_is_valid(struct drm_crtc *crtc,
- const struct cdv_intel_limit_t *limit,
- struct cdv_intel_clock_t *clock)
-{
- if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
- INTELPllInvalid("p1 out of range\n");
- if (clock->p < limit->p.min || limit->p.max < clock->p)
- INTELPllInvalid("p out of range\n");
- /* unnecessary to check the range of m(m1/M2)/n again */
- if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
- INTELPllInvalid("vco out of range\n");
- /* XXX: We may need to be checking "Dot clock"
- * depending on the multiplier, connector, etc.,
- * rather than just a single range.
- */
- if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
- INTELPllInvalid("dot out of range\n");
-
- return true;
-}
-
-static bool cdv_intel_find_best_PLL(struct drm_crtc *crtc, int target,
- int refclk,
- struct cdv_intel_clock_t *best_clock)
-{
- struct drm_device *dev = crtc->dev;
- struct cdv_intel_clock_t clock;
- const struct cdv_intel_limit_t *limit = cdv_intel_limit(crtc, refclk);
- int err = target;
-
-
- if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
- (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
- /*
- * For LVDS, if the panel is on, just rely on its current
- * settings for dual-channel. We haven't figured out how to
- * reliably set up different single/dual channel state, if we
- * even can.
- */
- if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
-
- memset(best_clock, 0, sizeof(*best_clock));
- clock.m1 = 0;
- /* m1 is reserved as 0 in CDV, n is a ring counter.
- So skip the m1 loop */
- for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) {
- for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max;
- clock.m2++) {
- for (clock.p1 = limit->p1.min;
- clock.p1 <= limit->p1.max;
- clock.p1++) {
- int this_err;
-
- cdv_intel_clock(dev, refclk, &clock);
-
- if (!cdv_intel_PLL_is_valid(crtc,
- limit, &clock))
- continue;
-
- this_err = abs(clock.dot - target);
- if (this_err < err) {
- *best_clock = clock;
- err = this_err;
- }
- }
- }
- }
-
- return err != target;
-}
-
-int cdv_intel_pipe_set_base(struct drm_crtc *crtc,
- int x, int y, struct drm_framebuffer *old_fb)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
- int pipe = psb_intel_crtc->pipe;
- unsigned long start, offset;
- int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE);
- int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
- int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
- u32 dspcntr;
- int ret = 0;
-
- if (!gma_power_begin(dev, true))
- return 0;
-
- /* no fb bound */
- if (!crtc->fb) {
- dev_err(dev->dev, "No FB bound\n");
- goto psb_intel_pipe_cleaner;
- }
-
-
- /* We are displaying this buffer, make sure it is actually loaded
- into the GTT */
- ret = psb_gtt_pin(psbfb->gtt);
- if (ret < 0)
- goto psb_intel_pipe_set_base_exit;
- start = psbfb->gtt->offset;
- offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8);
-
- REG_WRITE(dspstride, crtc->fb->pitches[0]);
-
- dspcntr = REG_READ(dspcntr_reg);
- dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
-
- switch (crtc->fb->bits_per_pixel) {
- case 8:
- dspcntr |= DISPPLANE_8BPP;
- break;
- case 16:
- if (crtc->fb->depth == 15)
- dspcntr |= DISPPLANE_15_16BPP;
- else
- dspcntr |= DISPPLANE_16BPP;
- break;
- case 24:
- case 32:
- dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
- break;
- default:
- dev_err(dev->dev, "Unknown color depth\n");
- ret = -EINVAL;
- goto psb_intel_pipe_set_base_exit;
- }
- REG_WRITE(dspcntr_reg, dspcntr);
-
- dev_dbg(dev->dev,
- "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
-
- REG_WRITE(dspbase, offset);
- REG_READ(dspbase);
- REG_WRITE(dspsurf, start);
- REG_READ(dspsurf);
-
-psb_intel_pipe_cleaner:
- /* If there was a previous display we can now unpin it */
- if (old_fb)
- psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
-
-psb_intel_pipe_set_base_exit:
- gma_power_end(dev);
- return ret;
-}
-
-/**
- * Sets the power management mode of the pipe and plane.
- *
- * This code should probably grow support for turning the cursor off and back
- * on appropriately at the same time as we're turning the pipe off/on.
- */
-static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
- int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE;
- int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
- u32 temp;
- bool enabled;
-
- /* XXX: When our outputs are all unaware of DPMS modes other than off
- * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
- */
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- /* Enable the DPLL */
- temp = REG_READ(dpll_reg);
- if ((temp & DPLL_VCO_ENABLE) == 0) {
- REG_WRITE(dpll_reg, temp);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
- REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
- REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
- }
-
- /* Jim Bish - switch plan and pipe per scott */
- /* Enable the plane */
- temp = REG_READ(dspcntr_reg);
- if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
- REG_WRITE(dspcntr_reg,
- temp | DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
- }
-
- udelay(150);
-
- /* Enable the pipe */
- temp = REG_READ(pipeconf_reg);
- if ((temp & PIPEACONF_ENABLE) == 0)
- REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
-
- psb_intel_crtc_load_lut(crtc);
-
- /* Give the overlay scaler a chance to enable
- * if it's on this pipe */
- /* psb_intel_crtc_dpms_video(crtc, true); TODO */
- break;
- case DRM_MODE_DPMS_OFF:
- /* Give the overlay scaler a chance to disable
- * if it's on this pipe */
- /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
-
- /* Disable the VGA plane that we never use */
- REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
-
- /* Jim Bish - changed pipe/plane here as well. */
-
- /* Wait for vblank for the disable to take effect */
- cdv_intel_wait_for_vblank(dev);
-
- /* Next, disable display pipes */
- temp = REG_READ(pipeconf_reg);
- if ((temp & PIPEACONF_ENABLE) != 0) {
- REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
- REG_READ(pipeconf_reg);
- }
-
- /* Wait for vblank for the disable to take effect. */
- cdv_intel_wait_for_vblank(dev);
-
- udelay(150);
-
- /* Disable display plane */
- temp = REG_READ(dspcntr_reg);
- if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
- REG_WRITE(dspcntr_reg,
- temp & ~DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
- REG_READ(dspbase_reg);
- }
-
- temp = REG_READ(dpll_reg);
- if ((temp & DPLL_VCO_ENABLE) != 0) {
- REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
- }
-
- /* Wait for the clocks to turn off. */
- udelay(150);
- break;
- }
- enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
- /*Set FIFO Watermarks*/
- REG_WRITE(DSPARB, 0x3F3E);
-}
-
-static void cdv_intel_crtc_prepare(struct drm_crtc *crtc)
-{
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
-}
-
-static void cdv_intel_crtc_commit(struct drm_crtc *crtc)
-{
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
-}
-
-void cdv_intel_encoder_prepare(struct drm_encoder *encoder)
-{
- struct drm_encoder_helper_funcs *encoder_funcs =
- encoder->helper_private;
- /* lvds has its own version of prepare see cdv_intel_lvds_prepare */
- encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
-}
-
-void cdv_intel_encoder_commit(struct drm_encoder *encoder)
-{
- struct drm_encoder_helper_funcs *encoder_funcs =
- encoder->helper_private;
- /* lvds has its own version of commit see cdv_intel_lvds_commit */
- encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
-}
-
-static bool cdv_intel_crtc_mode_fixup(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- return true;
-}
-
-
-/**
- * Return the pipe currently connected to the panel fitter,
- * or -1 if the panel fitter is not present or not in use
- */
-static int cdv_intel_panel_fitter_pipe(struct drm_device *dev)
-{
- u32 pfit_control;
-
- pfit_control = REG_READ(PFIT_CONTROL);
-
- /* See if the panel fitter is in use */
- if ((pfit_control & PFIT_ENABLE) == 0)
- return -1;
- return (pfit_control >> 29) & 0x3;
-}
-
-static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
- int dpll_md_reg = (psb_intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
- int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
- int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
- int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
- int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
- int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
- int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
- int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
- int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
- int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
- int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
- int refclk;
- struct cdv_intel_clock_t clock;
- u32 dpll = 0, dspcntr, pipeconf;
- bool ok, is_sdvo = false, is_dvo = false;
- bool is_crt = false, is_lvds = false, is_tv = false;
- bool is_hdmi = false;
- struct drm_mode_config *mode_config = &dev->mode_config;
- struct drm_connector *connector;
-
- list_for_each_entry(connector, &mode_config->connector_list, head) {
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
-
- if (!connector->encoder
- || connector->encoder->crtc != crtc)
- continue;
-
- switch (psb_intel_output->type) {
- case INTEL_OUTPUT_LVDS:
- is_lvds = true;
- break;
- case INTEL_OUTPUT_SDVO:
- is_sdvo = true;
- break;
- case INTEL_OUTPUT_DVO:
- is_dvo = true;
- break;
- case INTEL_OUTPUT_TVOUT:
- is_tv = true;
- break;
- case INTEL_OUTPUT_ANALOG:
- is_crt = true;
- break;
- case INTEL_OUTPUT_HDMI:
- is_hdmi = true;
- break;
- }
- }
-
- refclk = 96000;
-
- /* Hack selection about ref clk for CRT */
- /* Select 27MHz as the reference clk for HDMI */
- if (is_crt || is_hdmi)
- refclk = 27000;
-
- drm_mode_debug_printmodeline(adjusted_mode);
-
- ok = cdv_intel_find_best_PLL(crtc, adjusted_mode->clock, refclk,
- &clock);
- if (!ok) {
- dev_err(dev->dev, "Couldn't find PLL settings for mode!\n");
- return 0;
- }
-
- dpll = DPLL_VGA_MODE_DIS;
- if (is_tv) {
- /* XXX: just matching BIOS for now */
-/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
- dpll |= 3;
- }
- dpll |= PLL_REF_INPUT_DREFCLK;
-
- dpll |= DPLL_SYNCLOCK_ENABLE;
- dpll |= DPLL_VGA_MODE_DIS;
- if (is_lvds)
- dpll |= DPLLB_MODE_LVDS;
- else
- dpll |= DPLLB_MODE_DAC_SERIAL;
- /* dpll |= (2 << 11); */
-
- /* setup pipeconf */
- pipeconf = REG_READ(pipeconf_reg);
-
- /* Set up the display plane register */
- dspcntr = DISPPLANE_GAMMA_ENABLE;
-
- if (pipe == 0)
- dspcntr |= DISPPLANE_SEL_PIPE_A;
- else
- dspcntr |= DISPPLANE_SEL_PIPE_B;
-
- dspcntr |= DISPLAY_PLANE_ENABLE;
- pipeconf |= PIPEACONF_ENABLE;
-
- REG_WRITE(dpll_reg, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE);
- REG_READ(dpll_reg);
-
- cdv_dpll_set_clock_cdv(dev, crtc, &clock);
-
- udelay(150);
-
-
- /* The LVDS pin pair needs to be on before the DPLLs are enabled.
- * This is an exception to the general rule that mode_set doesn't turn
- * things on.
- */
- if (is_lvds) {
- u32 lvds = REG_READ(LVDS);
-
- lvds |=
- LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP |
- LVDS_PIPEB_SELECT;
- /* Set the B0-B3 data pairs corresponding to
- * whether we're going to
- * set the DPLLs for dual-channel mode or not.
- */
- if (clock.p2 == 7)
- lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
- else
- lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
-
- /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
- * appropriately here, but we need to look more
- * thoroughly into how panels behave in the two modes.
- */
-
- REG_WRITE(LVDS, lvds);
- REG_READ(LVDS);
- }
-
- dpll |= DPLL_VCO_ENABLE;
-
- /* Disable the panel fitter if it was on our pipe */
- if (cdv_intel_panel_fitter_pipe(dev) == pipe)
- REG_WRITE(PFIT_CONTROL, 0);
-
- DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
- drm_mode_debug_printmodeline(mode);
-
- REG_WRITE(dpll_reg,
- (REG_READ(dpll_reg) & ~DPLL_LOCK) | DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150); /* 42 usec w/o calibration, 110 with. rounded up. */
-
- if (!(REG_READ(dpll_reg) & DPLL_LOCK)) {
- dev_err(dev->dev, "Failed to get DPLL lock\n");
- return -EBUSY;
- }
-
- {
- int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
- REG_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
- }
-
- REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
- ((adjusted_mode->crtc_htotal - 1) << 16));
- REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
- ((adjusted_mode->crtc_hblank_end - 1) << 16));
- REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
- ((adjusted_mode->crtc_hsync_end - 1) << 16));
- REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
- REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
- ((adjusted_mode->crtc_vblank_end - 1) << 16));
- REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
- ((adjusted_mode->crtc_vsync_end - 1) << 16));
- /* pipesrc and dspsize control the size that is scaled from,
- * which should always be the user's requested size.
- */
- REG_WRITE(dspsize_reg,
- ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
- REG_WRITE(dsppos_reg, 0);
- REG_WRITE(pipesrc_reg,
- ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
- REG_WRITE(pipeconf_reg, pipeconf);
- REG_READ(pipeconf_reg);
-
- cdv_intel_wait_for_vblank(dev);
-
- REG_WRITE(dspcntr_reg, dspcntr);
-
- /* Flush the plane changes */
- {
- struct drm_crtc_helper_funcs *crtc_funcs =
- crtc->helper_private;
- crtc_funcs->mode_set_base(crtc, x, y, old_fb);
- }
-
- cdv_intel_wait_for_vblank(dev);
-
- return 0;
-}
-
-/** Loads the palette/gamma unit for the CRTC with the prepared values */
-void cdv_intel_crtc_load_lut(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *)dev->dev_private;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int palreg = PALETTE_A;
- int i;
-
- /* The clocks have to be on to load the palette. */
- if (!crtc->enabled)
- return;
-
- switch (psb_intel_crtc->pipe) {
- case 0:
- break;
- case 1:
- palreg = PALETTE_B;
- break;
- case 2:
- palreg = PALETTE_C;
- break;
- default:
- dev_err(dev->dev, "Illegal Pipe Number.\n");
- return;
- }
-
- if (gma_power_begin(dev, false)) {
- for (i = 0; i < 256; i++) {
- REG_WRITE(palreg + 4 * i,
- ((psb_intel_crtc->lut_r[i] +
- psb_intel_crtc->lut_adj[i]) << 16) |
- ((psb_intel_crtc->lut_g[i] +
- psb_intel_crtc->lut_adj[i]) << 8) |
- (psb_intel_crtc->lut_b[i] +
- psb_intel_crtc->lut_adj[i]));
- }
- gma_power_end(dev);
- } else {
- for (i = 0; i < 256; i++) {
- dev_priv->save_palette_a[i] =
- ((psb_intel_crtc->lut_r[i] +
- psb_intel_crtc->lut_adj[i]) << 16) |
- ((psb_intel_crtc->lut_g[i] +
- psb_intel_crtc->lut_adj[i]) << 8) |
- (psb_intel_crtc->lut_b[i] +
- psb_intel_crtc->lut_adj[i]);
- }
-
- }
-}
-
-/**
- * Save HW states of giving crtc
- */
-static void cdv_intel_crtc_save(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- /* struct drm_psb_private *dev_priv =
- (struct drm_psb_private *)dev->dev_private; */
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
- int pipeA = (psb_intel_crtc->pipe == 0);
- uint32_t paletteReg;
- int i;
-
- if (!crtc_state) {
- dev_dbg(dev->dev, "No CRTC state found\n");
- return;
- }
-
- crtc_state->saveDSPCNTR = REG_READ(pipeA ? DSPACNTR : DSPBCNTR);
- crtc_state->savePIPECONF = REG_READ(pipeA ? PIPEACONF : PIPEBCONF);
- crtc_state->savePIPESRC = REG_READ(pipeA ? PIPEASRC : PIPEBSRC);
- crtc_state->saveFP0 = REG_READ(pipeA ? FPA0 : FPB0);
- crtc_state->saveFP1 = REG_READ(pipeA ? FPA1 : FPB1);
- crtc_state->saveDPLL = REG_READ(pipeA ? DPLL_A : DPLL_B);
- crtc_state->saveHTOTAL = REG_READ(pipeA ? HTOTAL_A : HTOTAL_B);
- crtc_state->saveHBLANK = REG_READ(pipeA ? HBLANK_A : HBLANK_B);
- crtc_state->saveHSYNC = REG_READ(pipeA ? HSYNC_A : HSYNC_B);
- crtc_state->saveVTOTAL = REG_READ(pipeA ? VTOTAL_A : VTOTAL_B);
- crtc_state->saveVBLANK = REG_READ(pipeA ? VBLANK_A : VBLANK_B);
- crtc_state->saveVSYNC = REG_READ(pipeA ? VSYNC_A : VSYNC_B);
- crtc_state->saveDSPSTRIDE = REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE);
-
- /*NOTE: DSPSIZE DSPPOS only for psb*/
- crtc_state->saveDSPSIZE = REG_READ(pipeA ? DSPASIZE : DSPBSIZE);
- crtc_state->saveDSPPOS = REG_READ(pipeA ? DSPAPOS : DSPBPOS);
-
- crtc_state->saveDSPBASE = REG_READ(pipeA ? DSPABASE : DSPBBASE);
-
- DRM_DEBUG("(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
- crtc_state->saveDSPCNTR,
- crtc_state->savePIPECONF,
- crtc_state->savePIPESRC,
- crtc_state->saveFP0,
- crtc_state->saveFP1,
- crtc_state->saveDPLL,
- crtc_state->saveHTOTAL,
- crtc_state->saveHBLANK,
- crtc_state->saveHSYNC,
- crtc_state->saveVTOTAL,
- crtc_state->saveVBLANK,
- crtc_state->saveVSYNC,
- crtc_state->saveDSPSTRIDE,
- crtc_state->saveDSPSIZE,
- crtc_state->saveDSPPOS,
- crtc_state->saveDSPBASE
- );
-
- paletteReg = pipeA ? PALETTE_A : PALETTE_B;
- for (i = 0; i < 256; ++i)
- crtc_state->savePalette[i] = REG_READ(paletteReg + (i << 2));
-}
-
-/**
- * Restore HW states of giving crtc
- */
-static void cdv_intel_crtc_restore(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- /* struct drm_psb_private * dev_priv =
- (struct drm_psb_private *)dev->dev_private; */
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
- /* struct drm_crtc_helper_funcs * crtc_funcs = crtc->helper_private; */
- int pipeA = (psb_intel_crtc->pipe == 0);
- uint32_t paletteReg;
- int i;
-
- if (!crtc_state) {
- dev_dbg(dev->dev, "No crtc state\n");
- return;
- }
-
- DRM_DEBUG(
- "current:(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
- REG_READ(pipeA ? DSPACNTR : DSPBCNTR),
- REG_READ(pipeA ? PIPEACONF : PIPEBCONF),
- REG_READ(pipeA ? PIPEASRC : PIPEBSRC),
- REG_READ(pipeA ? FPA0 : FPB0),
- REG_READ(pipeA ? FPA1 : FPB1),
- REG_READ(pipeA ? DPLL_A : DPLL_B),
- REG_READ(pipeA ? HTOTAL_A : HTOTAL_B),
- REG_READ(pipeA ? HBLANK_A : HBLANK_B),
- REG_READ(pipeA ? HSYNC_A : HSYNC_B),
- REG_READ(pipeA ? VTOTAL_A : VTOTAL_B),
- REG_READ(pipeA ? VBLANK_A : VBLANK_B),
- REG_READ(pipeA ? VSYNC_A : VSYNC_B),
- REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE),
- REG_READ(pipeA ? DSPASIZE : DSPBSIZE),
- REG_READ(pipeA ? DSPAPOS : DSPBPOS),
- REG_READ(pipeA ? DSPABASE : DSPBBASE)
- );
-
- DRM_DEBUG(
- "saved: (%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
- crtc_state->saveDSPCNTR,
- crtc_state->savePIPECONF,
- crtc_state->savePIPESRC,
- crtc_state->saveFP0,
- crtc_state->saveFP1,
- crtc_state->saveDPLL,
- crtc_state->saveHTOTAL,
- crtc_state->saveHBLANK,
- crtc_state->saveHSYNC,
- crtc_state->saveVTOTAL,
- crtc_state->saveVBLANK,
- crtc_state->saveVSYNC,
- crtc_state->saveDSPSTRIDE,
- crtc_state->saveDSPSIZE,
- crtc_state->saveDSPPOS,
- crtc_state->saveDSPBASE
- );
-
-
- if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
- REG_WRITE(pipeA ? DPLL_A : DPLL_B,
- crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
- REG_READ(pipeA ? DPLL_A : DPLL_B);
- DRM_DEBUG("write dpll: %x\n",
- REG_READ(pipeA ? DPLL_A : DPLL_B));
- udelay(150);
- }
-
- REG_WRITE(pipeA ? FPA0 : FPB0, crtc_state->saveFP0);
- REG_READ(pipeA ? FPA0 : FPB0);
-
- REG_WRITE(pipeA ? FPA1 : FPB1, crtc_state->saveFP1);
- REG_READ(pipeA ? FPA1 : FPB1);
-
- REG_WRITE(pipeA ? DPLL_A : DPLL_B, crtc_state->saveDPLL);
- REG_READ(pipeA ? DPLL_A : DPLL_B);
- udelay(150);
-
- REG_WRITE(pipeA ? HTOTAL_A : HTOTAL_B, crtc_state->saveHTOTAL);
- REG_WRITE(pipeA ? HBLANK_A : HBLANK_B, crtc_state->saveHBLANK);
- REG_WRITE(pipeA ? HSYNC_A : HSYNC_B, crtc_state->saveHSYNC);
- REG_WRITE(pipeA ? VTOTAL_A : VTOTAL_B, crtc_state->saveVTOTAL);
- REG_WRITE(pipeA ? VBLANK_A : VBLANK_B, crtc_state->saveVBLANK);
- REG_WRITE(pipeA ? VSYNC_A : VSYNC_B, crtc_state->saveVSYNC);
- REG_WRITE(pipeA ? DSPASTRIDE : DSPBSTRIDE, crtc_state->saveDSPSTRIDE);
-
- REG_WRITE(pipeA ? DSPASIZE : DSPBSIZE, crtc_state->saveDSPSIZE);
- REG_WRITE(pipeA ? DSPAPOS : DSPBPOS, crtc_state->saveDSPPOS);
-
- REG_WRITE(pipeA ? PIPEASRC : PIPEBSRC, crtc_state->savePIPESRC);
- REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE);
- REG_WRITE(pipeA ? PIPEACONF : PIPEBCONF, crtc_state->savePIPECONF);
-
- cdv_intel_wait_for_vblank(dev);
-
- REG_WRITE(pipeA ? DSPACNTR : DSPBCNTR, crtc_state->saveDSPCNTR);
- REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE);
-
- cdv_intel_wait_for_vblank(dev);
-
- paletteReg = pipeA ? PALETTE_A : PALETTE_B;
- for (i = 0; i < 256; ++i)
- REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]);
-}
-
-static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc,
- struct drm_file *file_priv,
- uint32_t handle,
- uint32_t width, uint32_t height)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
- uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
- uint32_t temp;
- size_t addr = 0;
- struct gtt_range *gt;
- struct drm_gem_object *obj;
- int ret;
-
- /* if we want to turn of the cursor ignore width and height */
- if (!handle) {
- /* turn off the cursor */
- temp = CURSOR_MODE_DISABLE;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE(control, temp);
- REG_WRITE(base, 0);
- gma_power_end(dev);
- }
-
- /* unpin the old GEM object */
- if (psb_intel_crtc->cursor_obj) {
- gt = container_of(psb_intel_crtc->cursor_obj,
- struct gtt_range, gem);
- psb_gtt_unpin(gt);
- drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
- psb_intel_crtc->cursor_obj = NULL;
- }
-
- return 0;
- }
-
- /* Currently we only support 64x64 cursors */
- if (width != 64 || height != 64) {
- dev_dbg(dev->dev, "we currently only support 64x64 cursors\n");
- return -EINVAL;
- }
-
- obj = drm_gem_object_lookup(dev, file_priv, handle);
- if (!obj)
- return -ENOENT;
-
- if (obj->size < width * height * 4) {
- dev_dbg(dev->dev, "buffer is to small\n");
- return -ENOMEM;
- }
-
- gt = container_of(obj, struct gtt_range, gem);
-
- /* Pin the memory into the GTT */
- ret = psb_gtt_pin(gt);
- if (ret) {
- dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
- return ret;
- }
-
- addr = gt->offset; /* Or resource.start ??? */
-
- psb_intel_crtc->cursor_addr = addr;
-
- temp = 0;
- /* set the pipe for the cursor */
- temp |= (pipe << 28);
- temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE(control, temp);
- REG_WRITE(base, addr);
- gma_power_end(dev);
- }
-
- /* unpin the old GEM object */
- if (psb_intel_crtc->cursor_obj) {
- gt = container_of(psb_intel_crtc->cursor_obj,
- struct gtt_range, gem);
- psb_gtt_unpin(gt);
- drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
- psb_intel_crtc->cursor_obj = obj;
- }
- return 0;
-}
-
-static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- uint32_t temp = 0;
- uint32_t adder;
-
-
- if (x < 0) {
- temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
- x = -x;
- }
- if (y < 0) {
- temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
- y = -y;
- }
-
- temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
- temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
-
- adder = psb_intel_crtc->cursor_addr;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
- REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder);
- gma_power_end(dev);
- }
- return 0;
-}
-
-static void cdv_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red,
- u16 *green, u16 *blue, uint32_t start, uint32_t size)
-{
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int i;
- int end = (start + size > 256) ? 256 : start + size;
-
- for (i = start; i < end; i++) {
- psb_intel_crtc->lut_r[i] = red[i] >> 8;
- psb_intel_crtc->lut_g[i] = green[i] >> 8;
- psb_intel_crtc->lut_b[i] = blue[i] >> 8;
- }
-
- cdv_intel_crtc_load_lut(crtc);
-}
-
-static int cdv_crtc_set_config(struct drm_mode_set *set)
-{
- int ret = 0;
- struct drm_device *dev = set->crtc->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (!dev_priv->rpm_enabled)
- return drm_crtc_helper_set_config(set);
-
- pm_runtime_forbid(&dev->pdev->dev);
-
- ret = drm_crtc_helper_set_config(set);
-
- pm_runtime_allow(&dev->pdev->dev);
-
- return ret;
-}
-
-/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
-
-/* FIXME: why are we using this, should it be cdv_ in this tree ? */
-
-static void i8xx_clock(int refclk, struct cdv_intel_clock_t *clock)
-{
- clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
- clock->p = clock->p1 * clock->p2;
- clock->vco = refclk * clock->m / (clock->n + 2);
- clock->dot = clock->vco / clock->p;
-}
-
-/* Returns the clock of the currently programmed mode of the given pipe. */
-static int cdv_intel_crtc_clock_get(struct drm_device *dev,
- struct drm_crtc *crtc)
-{
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- u32 dpll;
- u32 fp;
- struct cdv_intel_clock_t clock;
- bool is_lvds;
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (gma_power_begin(dev, false)) {
- dpll = REG_READ((pipe == 0) ? DPLL_A : DPLL_B);
- if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
- fp = REG_READ((pipe == 0) ? FPA0 : FPB0);
- else
- fp = REG_READ((pipe == 0) ? FPA1 : FPB1);
- is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN);
- gma_power_end(dev);
- } else {
- dpll = (pipe == 0) ?
- dev_priv->saveDPLL_A : dev_priv->saveDPLL_B;
-
- if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
- fp = (pipe == 0) ?
- dev_priv->saveFPA0 :
- dev_priv->saveFPB0;
- else
- fp = (pipe == 0) ?
- dev_priv->saveFPA1 :
- dev_priv->saveFPB1;
-
- is_lvds = (pipe == 1) && (dev_priv->saveLVDS & LVDS_PORT_EN);
- }
-
- clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
- clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
- clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
-
- if (is_lvds) {
- clock.p1 =
- ffs((dpll &
- DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
- DPLL_FPA01_P1_POST_DIV_SHIFT);
- if (clock.p1 == 0) {
- clock.p1 = 4;
- dev_err(dev->dev, "PLL %d\n", dpll);
- }
- clock.p2 = 14;
-
- if ((dpll & PLL_REF_INPUT_MASK) ==
- PLLB_REF_INPUT_SPREADSPECTRUMIN) {
- /* XXX: might not be 66MHz */
- i8xx_clock(66000, &clock);
- } else
- i8xx_clock(48000, &clock);
- } else {
- if (dpll & PLL_P1_DIVIDE_BY_TWO)
- clock.p1 = 2;
- else {
- clock.p1 =
- ((dpll &
- DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
- DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
- }
- if (dpll & PLL_P2_DIVIDE_BY_4)
- clock.p2 = 4;
- else
- clock.p2 = 2;
-
- i8xx_clock(48000, &clock);
- }
-
- /* XXX: It would be nice to validate the clocks, but we can't reuse
- * i830PllIsValid() because it relies on the xf86_config connector
- * configuration being accurate, which it isn't necessarily.
- */
-
- return clock.dot;
-}
-
-/** Returns the currently programmed mode of the given pipe. */
-struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
- struct drm_crtc *crtc)
-{
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- struct drm_display_mode *mode;
- int htot;
- int hsync;
- int vtot;
- int vsync;
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (gma_power_begin(dev, false)) {
- htot = REG_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
- hsync = REG_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
- vtot = REG_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
- vsync = REG_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
- gma_power_end(dev);
- } else {
- htot = (pipe == 0) ?
- dev_priv->saveHTOTAL_A : dev_priv->saveHTOTAL_B;
- hsync = (pipe == 0) ?
- dev_priv->saveHSYNC_A : dev_priv->saveHSYNC_B;
- vtot = (pipe == 0) ?
- dev_priv->saveVTOTAL_A : dev_priv->saveVTOTAL_B;
- vsync = (pipe == 0) ?
- dev_priv->saveVSYNC_A : dev_priv->saveVSYNC_B;
- }
-
- mode = kzalloc(sizeof(*mode), GFP_KERNEL);
- if (!mode)
- return NULL;
-
- mode->clock = cdv_intel_crtc_clock_get(dev, crtc);
- mode->hdisplay = (htot & 0xffff) + 1;
- mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
- mode->hsync_start = (hsync & 0xffff) + 1;
- mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
- mode->vdisplay = (vtot & 0xffff) + 1;
- mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
- mode->vsync_start = (vsync & 0xffff) + 1;
- mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
-
- drm_mode_set_name(mode);
- drm_mode_set_crtcinfo(mode, 0);
-
- return mode;
-}
-
-static void cdv_intel_crtc_destroy(struct drm_crtc *crtc)
-{
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
-
- kfree(psb_intel_crtc->crtc_state);
- drm_crtc_cleanup(crtc);
- kfree(psb_intel_crtc);
-}
-
-const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = {
- .dpms = cdv_intel_crtc_dpms,
- .mode_fixup = cdv_intel_crtc_mode_fixup,
- .mode_set = cdv_intel_crtc_mode_set,
- .mode_set_base = cdv_intel_pipe_set_base,
- .prepare = cdv_intel_crtc_prepare,
- .commit = cdv_intel_crtc_commit,
-};
-
-const struct drm_crtc_funcs cdv_intel_crtc_funcs = {
- .save = cdv_intel_crtc_save,
- .restore = cdv_intel_crtc_restore,
- .cursor_set = cdv_intel_crtc_cursor_set,
- .cursor_move = cdv_intel_crtc_cursor_move,
- .gamma_set = cdv_intel_crtc_gamma_set,
- .set_config = cdv_crtc_set_config,
- .destroy = cdv_intel_crtc_destroy,
-};
-
-/*
- * Set the default value of cursor control and base register
- * to zero. This is a workaround for h/w defect on oaktrail
- */
-void cdv_intel_cursor_init(struct drm_device *dev, int pipe)
-{
- uint32_t control;
- uint32_t base;
-
- switch (pipe) {
- case 0:
- control = CURACNTR;
- base = CURABASE;
- break;
- case 1:
- control = CURBCNTR;
- base = CURBBASE;
- break;
- case 2:
- control = CURCCNTR;
- base = CURCBASE;
- break;
- default:
- return;
- }
-
- REG_WRITE(control, 0);
- REG_WRITE(base, 0);
-}
-
+++ /dev/null
-/*
- * Copyright © 2006-2011 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * jim liu <jim.liu@intel.com>
- *
- * FIXME:
- * We should probably make this generic and share it with Medfield
- */
-
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include <drm/drm_crtc.h>
-#include <drm/drm_edid.h>
-#include "psb_intel_drv.h"
-#include "psb_drv.h"
-#include "psb_intel_reg.h"
-#include <linux/pm_runtime.h>
-
-/* hdmi control bits */
-#define HDMI_NULL_PACKETS_DURING_VSYNC (1 << 9)
-#define HDMI_BORDER_ENABLE (1 << 7)
-#define HDMI_AUDIO_ENABLE (1 << 6)
-#define HDMI_VSYNC_ACTIVE_HIGH (1 << 4)
-#define HDMI_HSYNC_ACTIVE_HIGH (1 << 3)
-/* hdmi-b control bits */
-#define HDMIB_PIPE_B_SELECT (1 << 30)
-
-
-struct mid_intel_hdmi_priv {
- u32 hdmi_reg;
- u32 save_HDMIB;
- bool has_hdmi_sink;
- bool has_hdmi_audio;
- /* Should set this when detect hotplug */
- bool hdmi_device_connected;
- struct mdfld_hdmi_i2c *i2c_bus;
- struct i2c_adapter *hdmi_i2c_adapter; /* for control functions */
- struct drm_device *dev;
-};
-
-static void cdv_hdmi_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
- struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
- u32 hdmib;
- struct drm_crtc *crtc = encoder->crtc;
- struct psb_intel_crtc *intel_crtc = to_psb_intel_crtc(crtc);
-
- hdmib = (2 << 10);
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
- hdmib |= HDMI_VSYNC_ACTIVE_HIGH;
- if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
- hdmib |= HDMI_HSYNC_ACTIVE_HIGH;
-
- if (intel_crtc->pipe == 1)
- hdmib |= HDMIB_PIPE_B_SELECT;
-
- if (hdmi_priv->has_hdmi_audio) {
- hdmib |= HDMI_AUDIO_ENABLE;
- hdmib |= HDMI_NULL_PACKETS_DURING_VSYNC;
- }
-
- REG_WRITE(hdmi_priv->hdmi_reg, hdmib);
- REG_READ(hdmi_priv->hdmi_reg);
-}
-
-static bool cdv_hdmi_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- return true;
-}
-
-static void cdv_hdmi_dpms(struct drm_encoder *encoder, int mode)
-{
- struct drm_device *dev = encoder->dev;
- struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
- struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
- u32 hdmib;
-
- hdmib = REG_READ(hdmi_priv->hdmi_reg);
-
- if (mode != DRM_MODE_DPMS_ON)
- REG_WRITE(hdmi_priv->hdmi_reg, hdmib & ~HDMIB_PORT_EN);
- else
- REG_WRITE(hdmi_priv->hdmi_reg, hdmib | HDMIB_PORT_EN);
- REG_READ(hdmi_priv->hdmi_reg);
-}
-
-static void cdv_hdmi_save(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct psb_intel_output *output = to_psb_intel_output(connector);
- struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
-
- hdmi_priv->save_HDMIB = REG_READ(hdmi_priv->hdmi_reg);
-}
-
-static void cdv_hdmi_restore(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct psb_intel_output *output = to_psb_intel_output(connector);
- struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
-
- REG_WRITE(hdmi_priv->hdmi_reg, hdmi_priv->save_HDMIB);
- REG_READ(hdmi_priv->hdmi_reg);
-}
-
-static enum drm_connector_status cdv_hdmi_detect(
- struct drm_connector *connector, bool force)
-{
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- struct mid_intel_hdmi_priv *hdmi_priv = psb_intel_output->dev_priv;
- struct edid *edid = NULL;
- enum drm_connector_status status = connector_status_disconnected;
-
- edid = drm_get_edid(&psb_intel_output->base,
- psb_intel_output->hdmi_i2c_adapter);
-
- hdmi_priv->has_hdmi_sink = false;
- hdmi_priv->has_hdmi_audio = false;
- if (edid) {
- if (edid->input & DRM_EDID_INPUT_DIGITAL) {
- status = connector_status_connected;
- hdmi_priv->has_hdmi_sink =
- drm_detect_hdmi_monitor(edid);
- hdmi_priv->has_hdmi_audio =
- drm_detect_monitor_audio(edid);
- }
-
- psb_intel_output->base.display_info.raw_edid = NULL;
- kfree(edid);
- }
- return status;
-}
-
-static int cdv_hdmi_set_property(struct drm_connector *connector,
- struct drm_property *property,
- uint64_t value)
-{
- struct drm_encoder *encoder = connector->encoder;
-
- if (!strcmp(property->name, "scaling mode") && encoder) {
- struct psb_intel_crtc *crtc = to_psb_intel_crtc(encoder->crtc);
- bool centre;
- uint64_t curValue;
-
- if (!crtc)
- return -1;
-
- switch (value) {
- case DRM_MODE_SCALE_FULLSCREEN:
- break;
- case DRM_MODE_SCALE_NO_SCALE:
- break;
- case DRM_MODE_SCALE_ASPECT:
- break;
- default:
- return -1;
- }
-
- if (drm_connector_property_get_value(connector,
- property, &curValue))
- return -1;
-
- if (curValue == value)
- return 0;
-
- if (drm_connector_property_set_value(connector,
- property, value))
- return -1;
-
- centre = (curValue == DRM_MODE_SCALE_NO_SCALE) ||
- (value == DRM_MODE_SCALE_NO_SCALE);
-
- if (crtc->saved_mode.hdisplay != 0 &&
- crtc->saved_mode.vdisplay != 0) {
- if (centre) {
- if (!drm_crtc_helper_set_mode(encoder->crtc, &crtc->saved_mode,
- encoder->crtc->x, encoder->crtc->y, encoder->crtc->fb))
- return -1;
- } else {
- struct drm_encoder_helper_funcs *helpers
- = encoder->helper_private;
- helpers->mode_set(encoder, &crtc->saved_mode,
- &crtc->saved_adjusted_mode);
- }
- }
- }
- return 0;
-}
-
-/*
- * Return the list of HDMI DDC modes if available.
- */
-static int cdv_hdmi_get_modes(struct drm_connector *connector)
-{
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- struct edid *edid = NULL;
- int ret = 0;
-
- edid = drm_get_edid(&psb_intel_output->base,
- psb_intel_output->hdmi_i2c_adapter);
- if (edid) {
- drm_mode_connector_update_edid_property(&psb_intel_output->
- base, edid);
- ret = drm_add_edid_modes(&psb_intel_output->base, edid);
- kfree(edid);
- }
- return ret;
-}
-
-static int cdv_hdmi_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
-
- if (mode->clock > 165000)
- return MODE_CLOCK_HIGH;
- if (mode->clock < 20000)
- return MODE_CLOCK_HIGH;
-
- /* just in case */
- if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
- return MODE_NO_DBLESCAN;
-
- /* just in case */
- if (mode->flags & DRM_MODE_FLAG_INTERLACE)
- return MODE_NO_INTERLACE;
-
- /*
- * FIXME: for now we limit the size to 1680x1050 on CDV, otherwise it
- * will go beyond the stolen memory size allocated to the framebuffer
- */
- if (mode->hdisplay > 1680)
- return MODE_PANEL;
- if (mode->vdisplay > 1050)
- return MODE_PANEL;
- return MODE_OK;
-}
-
-static void cdv_hdmi_destroy(struct drm_connector *connector)
-{
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
-
- if (psb_intel_output->ddc_bus)
- psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
- drm_sysfs_connector_remove(connector);
- drm_connector_cleanup(connector);
- kfree(connector);
-}
-
-static const struct drm_encoder_helper_funcs cdv_hdmi_helper_funcs = {
- .dpms = cdv_hdmi_dpms,
- .mode_fixup = cdv_hdmi_mode_fixup,
- .prepare = psb_intel_encoder_prepare,
- .mode_set = cdv_hdmi_mode_set,
- .commit = psb_intel_encoder_commit,
-};
-
-static const struct drm_connector_helper_funcs
- cdv_hdmi_connector_helper_funcs = {
- .get_modes = cdv_hdmi_get_modes,
- .mode_valid = cdv_hdmi_mode_valid,
- .best_encoder = psb_intel_best_encoder,
-};
-
-static const struct drm_connector_funcs cdv_hdmi_connector_funcs = {
- .dpms = drm_helper_connector_dpms,
- .save = cdv_hdmi_save,
- .restore = cdv_hdmi_restore,
- .detect = cdv_hdmi_detect,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .set_property = cdv_hdmi_set_property,
- .destroy = cdv_hdmi_destroy,
-};
-
-void cdv_hdmi_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev, int reg)
-{
- struct psb_intel_output *psb_intel_output;
- struct drm_connector *connector;
- struct drm_encoder *encoder;
- struct mid_intel_hdmi_priv *hdmi_priv;
- int ddc_bus;
-
- psb_intel_output = kzalloc(sizeof(struct psb_intel_output) +
- sizeof(struct mid_intel_hdmi_priv), GFP_KERNEL);
- if (!psb_intel_output)
- return;
-
- hdmi_priv = (struct mid_intel_hdmi_priv *)(psb_intel_output + 1);
- psb_intel_output->mode_dev = mode_dev;
- connector = &psb_intel_output->base;
- encoder = &psb_intel_output->enc;
- drm_connector_init(dev, &psb_intel_output->base,
- &cdv_hdmi_connector_funcs,
- DRM_MODE_CONNECTOR_DVID);
-
- drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs,
- DRM_MODE_ENCODER_TMDS);
-
- drm_mode_connector_attach_encoder(&psb_intel_output->base,
- &psb_intel_output->enc);
- psb_intel_output->type = INTEL_OUTPUT_HDMI;
- hdmi_priv->hdmi_reg = reg;
- hdmi_priv->has_hdmi_sink = false;
- psb_intel_output->dev_priv = hdmi_priv;
-
- drm_encoder_helper_add(encoder, &cdv_hdmi_helper_funcs);
- drm_connector_helper_add(connector,
- &cdv_hdmi_connector_helper_funcs);
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
- connector->interlace_allowed = false;
- connector->doublescan_allowed = false;
-
- drm_connector_attach_property(connector,
- dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN);
-
- switch (reg) {
- case SDVOB:
- ddc_bus = GPIOE;
- break;
- case SDVOC:
- ddc_bus = GPIOD;
- break;
- default:
- DRM_ERROR("unknown reg 0x%x for HDMI\n", reg);
- goto failed_ddc;
- break;
- }
-
- psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
- ddc_bus, (reg == SDVOB) ? "HDMIB" : "HDMIC");
-
- if (!psb_intel_output->ddc_bus) {
- dev_err(dev->dev, "No ddc adapter available!\n");
- goto failed_ddc;
- }
- psb_intel_output->hdmi_i2c_adapter =
- &(psb_intel_output->ddc_bus->adapter);
- hdmi_priv->dev = dev;
- drm_sysfs_connector_add(connector);
- return;
-
-failed_ddc:
- drm_encoder_cleanup(&psb_intel_output->enc);
- drm_connector_cleanup(&psb_intel_output->base);
- kfree(psb_intel_output);
-}
+++ /dev/null
-/*
- * Copyright © 2006-2011 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- * Dave Airlie <airlied@linux.ie>
- * Jesse Barnes <jesse.barnes@intel.com>
- */
-
-#include <linux/i2c.h>
-#include <linux/dmi.h>
-#include <drm/drmP.h>
-
-#include "intel_bios.h"
-#include "psb_drv.h"
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "power.h"
-#include <linux/pm_runtime.h>
-#include "cdv_device.h"
-
-/**
- * LVDS I2C backlight control macros
- */
-#define BRIGHTNESS_MAX_LEVEL 100
-#define BRIGHTNESS_MASK 0xFF
-#define BLC_I2C_TYPE 0x01
-#define BLC_PWM_TYPT 0x02
-
-#define BLC_POLARITY_NORMAL 0
-#define BLC_POLARITY_INVERSE 1
-
-#define PSB_BLC_MAX_PWM_REG_FREQ (0xFFFE)
-#define PSB_BLC_MIN_PWM_REG_FREQ (0x2)
-#define PSB_BLC_PWM_PRECISION_FACTOR (10)
-#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16)
-#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
-
-struct cdv_intel_lvds_priv {
- /**
- * Saved LVDO output states
- */
- uint32_t savePP_ON;
- uint32_t savePP_OFF;
- uint32_t saveLVDS;
- uint32_t savePP_CONTROL;
- uint32_t savePP_CYCLE;
- uint32_t savePFIT_CONTROL;
- uint32_t savePFIT_PGM_RATIOS;
- uint32_t saveBLC_PWM_CTL;
-};
-
-/*
- * Returns the maximum level of the backlight duty cycle field.
- */
-static u32 cdv_intel_lvds_get_max_backlight(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 retval;
-
- if (gma_power_begin(dev, false)) {
- retval = ((REG_READ(BLC_PWM_CTL) &
- BACKLIGHT_MODULATION_FREQ_MASK) >>
- BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
-
- gma_power_end(dev);
- } else
- retval = ((dev_priv->saveBLC_PWM_CTL &
- BACKLIGHT_MODULATION_FREQ_MASK) >>
- BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
-
- return retval;
-}
-
-/*
- * Set LVDS backlight level by I2C command
- */
-static int cdv_lvds_i2c_set_brightness(struct drm_device *dev,
- unsigned int level)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
- u8 out_buf[2];
- unsigned int blc_i2c_brightness;
-
- struct i2c_msg msgs[] = {
- {
- .addr = lvds_i2c_bus->slave_addr,
- .flags = 0,
- .len = 2,
- .buf = out_buf,
- }
- };
-
- blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
- BRIGHTNESS_MASK /
- BRIGHTNESS_MAX_LEVEL);
-
- if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
- blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
-
- out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
- out_buf[1] = (u8)blc_i2c_brightness;
-
- if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1)
- return 0;
-
- DRM_ERROR("I2C transfer error\n");
- return -1;
-}
-
-
-static int cdv_lvds_pwm_set_brightness(struct drm_device *dev, int level)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- u32 max_pwm_blc;
- u32 blc_pwm_duty_cycle;
-
- max_pwm_blc = cdv_intel_lvds_get_max_backlight(dev);
-
- /*BLC_PWM_CTL Should be initiated while backlight device init*/
- BUG_ON((max_pwm_blc & PSB_BLC_MAX_PWM_REG_FREQ) == 0);
-
- blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
-
- if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
- blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
-
- blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
- REG_WRITE(BLC_PWM_CTL,
- (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
- (blc_pwm_duty_cycle));
-
- return 0;
-}
-
-/*
- * Set LVDS backlight level either by I2C or PWM
- */
-void cdv_intel_lvds_set_brightness(struct drm_device *dev, int level)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (!dev_priv->lvds_bl) {
- DRM_ERROR("NO LVDS Backlight Info\n");
- return;
- }
-
- if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
- cdv_lvds_i2c_set_brightness(dev, level);
- else
- cdv_lvds_pwm_set_brightness(dev, level);
-}
-
-/**
- * Sets the backlight level.
- *
- * level backlight level, from 0 to cdv_intel_lvds_get_max_backlight().
- */
-static void cdv_intel_lvds_set_backlight(struct drm_device *dev, int level)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 blc_pwm_ctl;
-
- if (gma_power_begin(dev, false)) {
- blc_pwm_ctl =
- REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
- REG_WRITE(BLC_PWM_CTL,
- (blc_pwm_ctl |
- (level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
- gma_power_end(dev);
- } else {
- blc_pwm_ctl = dev_priv->saveBLC_PWM_CTL &
- ~BACKLIGHT_DUTY_CYCLE_MASK;
- dev_priv->saveBLC_PWM_CTL = (blc_pwm_ctl |
- (level << BACKLIGHT_DUTY_CYCLE_SHIFT));
- }
-}
-
-/**
- * Sets the power state for the panel.
- */
-static void cdv_intel_lvds_set_power(struct drm_device *dev,
- struct psb_intel_output *output, bool on)
-{
- u32 pp_status;
-
- if (!gma_power_begin(dev, true))
- return;
-
- if (on) {
- REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
- POWER_TARGET_ON);
- do {
- pp_status = REG_READ(PP_STATUS);
- } while ((pp_status & PP_ON) == 0);
-
- cdv_intel_lvds_set_backlight(dev,
- output->
- mode_dev->backlight_duty_cycle);
- } else {
- cdv_intel_lvds_set_backlight(dev, 0);
-
- REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
- ~POWER_TARGET_ON);
- do {
- pp_status = REG_READ(PP_STATUS);
- } while (pp_status & PP_ON);
- }
- gma_power_end(dev);
-}
-
-static void cdv_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
-{
- struct drm_device *dev = encoder->dev;
- struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
- if (mode == DRM_MODE_DPMS_ON)
- cdv_intel_lvds_set_power(dev, output, true);
- else
- cdv_intel_lvds_set_power(dev, output, false);
- /* XXX: We never power down the LVDS pairs. */
-}
-
-static void cdv_intel_lvds_save(struct drm_connector *connector)
-{
-}
-
-static void cdv_intel_lvds_restore(struct drm_connector *connector)
-{
-}
-
-int cdv_intel_lvds_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- struct drm_display_mode *fixed_mode =
- psb_intel_output->mode_dev->panel_fixed_mode;
-
- /* just in case */
- if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
- return MODE_NO_DBLESCAN;
-
- /* just in case */
- if (mode->flags & DRM_MODE_FLAG_INTERLACE)
- return MODE_NO_INTERLACE;
-
- if (fixed_mode) {
- if (mode->hdisplay > fixed_mode->hdisplay)
- return MODE_PANEL;
- if (mode->vdisplay > fixed_mode->vdisplay)
- return MODE_PANEL;
- }
- return MODE_OK;
-}
-
-bool cdv_intel_lvds_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct psb_intel_mode_device *mode_dev =
- enc_to_psb_intel_output(encoder)->mode_dev;
- struct drm_device *dev = encoder->dev;
- struct drm_encoder *tmp_encoder;
- struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
-
- /* Should never happen!! */
- list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
- head) {
- if (tmp_encoder != encoder
- && tmp_encoder->crtc == encoder->crtc) {
- printk(KERN_ERR "Can't enable LVDS and another "
- "encoder on the same pipe\n");
- return false;
- }
- }
-
- /*
- * If we have timings from the BIOS for the panel, put them in
- * to the adjusted mode. The CRTC will be set up for this mode,
- * with the panel scaling set up to source from the H/VDisplay
- * of the original mode.
- */
- if (panel_fixed_mode != NULL) {
- adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
- adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
- adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
- adjusted_mode->htotal = panel_fixed_mode->htotal;
- adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
- adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
- adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
- adjusted_mode->vtotal = panel_fixed_mode->vtotal;
- adjusted_mode->clock = panel_fixed_mode->clock;
- drm_mode_set_crtcinfo(adjusted_mode,
- CRTC_INTERLACE_HALVE_V);
- }
-
- /*
- * XXX: It would be nice to support lower refresh rates on the
- * panels to reduce power consumption, and perhaps match the
- * user's requested refresh rate.
- */
-
- return true;
-}
-
-static void cdv_intel_lvds_prepare(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
- struct psb_intel_mode_device *mode_dev = output->mode_dev;
-
- if (!gma_power_begin(dev, true))
- return;
-
- mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
- mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
- BACKLIGHT_DUTY_CYCLE_MASK);
-
- cdv_intel_lvds_set_power(dev, output, false);
-
- gma_power_end(dev);
-}
-
-static void cdv_intel_lvds_commit(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
- struct psb_intel_mode_device *mode_dev = output->mode_dev;
-
- if (mode_dev->backlight_duty_cycle == 0)
- mode_dev->backlight_duty_cycle =
- cdv_intel_lvds_get_max_backlight(dev);
-
- cdv_intel_lvds_set_power(dev, output, true);
-}
-
-static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 pfit_control;
-
- /*
- * The LVDS pin pair will already have been turned on in the
- * cdv_intel_crtc_mode_set since it has a large impact on the DPLL
- * settings.
- */
-
- /*
- * Enable automatic panel scaling so that non-native modes fill the
- * screen. Should be enabled before the pipe is enabled, according to
- * register description and PRM.
- */
- if (mode->hdisplay != adjusted_mode->hdisplay ||
- mode->vdisplay != adjusted_mode->vdisplay)
- pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
- HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
- HORIZ_INTERP_BILINEAR);
- else
- pfit_control = 0;
-
- if (dev_priv->lvds_dither)
- pfit_control |= PANEL_8TO6_DITHER_ENABLE;
-
- REG_WRITE(PFIT_CONTROL, pfit_control);
-}
-
-/**
- * Detect the LVDS connection.
- *
- * This always returns CONNECTOR_STATUS_CONNECTED.
- * This connector should only have
- * been set up if the LVDS was actually connected anyway.
- */
-static enum drm_connector_status cdv_intel_lvds_detect(
- struct drm_connector *connector, bool force)
-{
- return connector_status_connected;
-}
-
-/**
- * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
- */
-static int cdv_intel_lvds_get_modes(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- struct psb_intel_mode_device *mode_dev =
- psb_intel_output->mode_dev;
- int ret;
-
- ret = psb_intel_ddc_get_modes(psb_intel_output);
-
- if (ret)
- return ret;
-
- /* Didn't get an EDID, so
- * Set wide sync ranges so we get all modes
- * handed to valid_mode for checking
- */
- connector->display_info.min_vfreq = 0;
- connector->display_info.max_vfreq = 200;
- connector->display_info.min_hfreq = 0;
- connector->display_info.max_hfreq = 200;
- if (mode_dev->panel_fixed_mode != NULL) {
- struct drm_display_mode *mode =
- drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
- drm_mode_probed_add(connector, mode);
- return 1;
- }
-
- return 0;
-}
-
-/**
- * cdv_intel_lvds_destroy - unregister and free LVDS structures
- * @connector: connector to free
- *
- * Unregister the DDC bus for this connector then free the driver private
- * structure.
- */
-void cdv_intel_lvds_destroy(struct drm_connector *connector)
-{
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
-
- if (psb_intel_output->ddc_bus)
- psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
- drm_sysfs_connector_remove(connector);
- drm_connector_cleanup(connector);
- kfree(connector);
-}
-
-int cdv_intel_lvds_set_property(struct drm_connector *connector,
- struct drm_property *property,
- uint64_t value)
-{
- struct drm_encoder *encoder = connector->encoder;
-
- if (!strcmp(property->name, "scaling mode") && encoder) {
- struct psb_intel_crtc *crtc =
- to_psb_intel_crtc(encoder->crtc);
- uint64_t curValue;
-
- if (!crtc)
- return -1;
-
- switch (value) {
- case DRM_MODE_SCALE_FULLSCREEN:
- break;
- case DRM_MODE_SCALE_NO_SCALE:
- break;
- case DRM_MODE_SCALE_ASPECT:
- break;
- default:
- return -1;
- }
-
- if (drm_connector_property_get_value(connector,
- property,
- &curValue))
- return -1;
-
- if (curValue == value)
- return 0;
-
- if (drm_connector_property_set_value(connector,
- property,
- value))
- return -1;
-
- if (crtc->saved_mode.hdisplay != 0 &&
- crtc->saved_mode.vdisplay != 0) {
- if (!drm_crtc_helper_set_mode(encoder->crtc,
- &crtc->saved_mode,
- encoder->crtc->x,
- encoder->crtc->y,
- encoder->crtc->fb))
- return -1;
- }
- } else if (!strcmp(property->name, "backlight") && encoder) {
- if (drm_connector_property_set_value(connector,
- property,
- value))
- return -1;
- else {
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- struct drm_psb_private *dev_priv =
- encoder->dev->dev_private;
- struct backlight_device *bd =
- dev_priv->backlight_device;
- bd->props.brightness = value;
- backlight_update_status(bd);
-#endif
- }
- } else if (!strcmp(property->name, "DPMS") && encoder) {
- struct drm_encoder_helper_funcs *helpers =
- encoder->helper_private;
- helpers->dpms(encoder, value);
- }
- return 0;
-}
-
-static const struct drm_encoder_helper_funcs
- cdv_intel_lvds_helper_funcs = {
- .dpms = cdv_intel_lvds_encoder_dpms,
- .mode_fixup = cdv_intel_lvds_mode_fixup,
- .prepare = cdv_intel_lvds_prepare,
- .mode_set = cdv_intel_lvds_mode_set,
- .commit = cdv_intel_lvds_commit,
-};
-
-static const struct drm_connector_helper_funcs
- cdv_intel_lvds_connector_helper_funcs = {
- .get_modes = cdv_intel_lvds_get_modes,
- .mode_valid = cdv_intel_lvds_mode_valid,
- .best_encoder = psb_intel_best_encoder,
-};
-
-static const struct drm_connector_funcs cdv_intel_lvds_connector_funcs = {
- .dpms = drm_helper_connector_dpms,
- .save = cdv_intel_lvds_save,
- .restore = cdv_intel_lvds_restore,
- .detect = cdv_intel_lvds_detect,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .set_property = cdv_intel_lvds_set_property,
- .destroy = cdv_intel_lvds_destroy,
-};
-
-
-static void cdv_intel_lvds_enc_destroy(struct drm_encoder *encoder)
-{
- drm_encoder_cleanup(encoder);
-}
-
-const struct drm_encoder_funcs cdv_intel_lvds_enc_funcs = {
- .destroy = cdv_intel_lvds_enc_destroy,
-};
-
-/**
- * cdv_intel_lvds_init - setup LVDS connectors on this device
- * @dev: drm device
- *
- * Create the connector, register the LVDS DDC bus, and try to figure out what
- * modes we can display on the LVDS panel (if present).
- */
-void cdv_intel_lvds_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev)
-{
- struct psb_intel_output *psb_intel_output;
- struct cdv_intel_lvds_priv *lvds_priv;
- struct drm_connector *connector;
- struct drm_encoder *encoder;
- struct drm_display_mode *scan;
- struct drm_crtc *crtc;
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 lvds;
- int pipe;
-
- psb_intel_output = kzalloc(sizeof(struct psb_intel_output) +
- sizeof(struct cdv_intel_lvds_priv), GFP_KERNEL);
- if (!psb_intel_output)
- return;
-
- lvds_priv = (struct cdv_intel_lvds_priv *)(psb_intel_output + 1);
-
- psb_intel_output->dev_priv = lvds_priv;
-
- psb_intel_output->mode_dev = mode_dev;
- connector = &psb_intel_output->base;
- encoder = &psb_intel_output->enc;
-
-
- drm_connector_init(dev, &psb_intel_output->base,
- &cdv_intel_lvds_connector_funcs,
- DRM_MODE_CONNECTOR_LVDS);
-
- drm_encoder_init(dev, &psb_intel_output->enc,
- &cdv_intel_lvds_enc_funcs,
- DRM_MODE_ENCODER_LVDS);
-
-
- drm_mode_connector_attach_encoder(&psb_intel_output->base,
- &psb_intel_output->enc);
- psb_intel_output->type = INTEL_OUTPUT_LVDS;
-
- drm_encoder_helper_add(encoder, &cdv_intel_lvds_helper_funcs);
- drm_connector_helper_add(connector,
- &cdv_intel_lvds_connector_helper_funcs);
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
- connector->interlace_allowed = false;
- connector->doublescan_allowed = false;
-
- /*Attach connector properties*/
- drm_connector_attach_property(connector,
- dev->mode_config.scaling_mode_property,
- DRM_MODE_SCALE_FULLSCREEN);
- drm_connector_attach_property(connector,
- dev_priv->backlight_property,
- BRIGHTNESS_MAX_LEVEL);
-
- /**
- * Set up I2C bus
- * FIXME: distroy i2c_bus when exit
- */
- psb_intel_output->i2c_bus = psb_intel_i2c_create(dev,
- GPIOB,
- "LVDSBLC_B");
- if (!psb_intel_output->i2c_bus) {
- dev_printk(KERN_ERR,
- &dev->pdev->dev, "I2C bus registration failed.\n");
- goto failed_blc_i2c;
- }
- psb_intel_output->i2c_bus->slave_addr = 0x2C;
- dev_priv->lvds_i2c_bus = psb_intel_output->i2c_bus;
-
- /*
- * LVDS discovery:
- * 1) check for EDID on DDC
- * 2) check for VBT data
- * 3) check to see if LVDS is already on
- * if none of the above, no panel
- * 4) make sure lid is open
- * if closed, act like it's not there for now
- */
-
- /* Set up the DDC bus. */
- psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
- GPIOC,
- "LVDSDDC_C");
- if (!psb_intel_output->ddc_bus) {
- dev_printk(KERN_ERR, &dev->pdev->dev,
- "DDC bus registration " "failed.\n");
- goto failed_ddc;
- }
-
- /*
- * Attempt to get the fixed panel mode from DDC. Assume that the
- * preferred mode is the right one.
- */
- psb_intel_ddc_get_modes(psb_intel_output);
- list_for_each_entry(scan, &connector->probed_modes, head) {
- if (scan->type & DRM_MODE_TYPE_PREFERRED) {
- mode_dev->panel_fixed_mode =
- drm_mode_duplicate(dev, scan);
- goto out; /* FIXME: check for quirks */
- }
- }
-
- /* Failed to get EDID, what about VBT? do we need this?*/
- if (dev_priv->lfp_lvds_vbt_mode) {
- mode_dev->panel_fixed_mode =
- drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
- if (mode_dev->panel_fixed_mode) {
- mode_dev->panel_fixed_mode->type |=
- DRM_MODE_TYPE_PREFERRED;
- goto out; /* FIXME: check for quirks */
- }
- }
- /*
- * If we didn't get EDID, try checking if the panel is already turned
- * on. If so, assume that whatever is currently programmed is the
- * correct mode.
- */
- lvds = REG_READ(LVDS);
- pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
- crtc = psb_intel_get_crtc_from_pipe(dev, pipe);
-
- if (crtc && (lvds & LVDS_PORT_EN)) {
- mode_dev->panel_fixed_mode =
- cdv_intel_crtc_mode_get(dev, crtc);
- if (mode_dev->panel_fixed_mode) {
- mode_dev->panel_fixed_mode->type |=
- DRM_MODE_TYPE_PREFERRED;
- goto out; /* FIXME: check for quirks */
- }
- }
-
- /* If we still don't have a mode after all that, give up. */
- if (!mode_dev->panel_fixed_mode) {
- DRM_DEBUG
- ("Found no modes on the lvds, ignoring the LVDS\n");
- goto failed_find;
- }
-
-out:
- drm_sysfs_connector_add(connector);
- return;
-
-failed_find:
- printk(KERN_ERR "Failed find\n");
- if (psb_intel_output->ddc_bus)
- psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
-failed_ddc:
- printk(KERN_ERR "Failed DDC\n");
- if (psb_intel_output->i2c_bus)
- psb_intel_i2c_destroy(psb_intel_output->i2c_bus);
-failed_blc_i2c:
- printk(KERN_ERR "Failed BLC\n");
- drm_encoder_cleanup(encoder);
- drm_connector_cleanup(connector);
- kfree(connector);
-}
+++ /dev/null
-/*
- * Copyright (c) 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
- */
-
-#ifndef HDMI_H
-#define HDMI_H
-
-extern void hdmi_init(struct drm_device *dev);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
- */
-
-#ifndef PYR_CMD_H
-#define PYR_CMD_H
-
-extern void pyr_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs);
-
-#endif
-
+++ /dev/null
-/*
- * Copyright (c) 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
-*/
-
-#ifndef PYR_VID_H
-#define PYR_VID_H
-
-extern void pyr_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs);
-extern struct drm_display_mode *pyr_vid_get_config_mode(struct drm_device* dev);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
- */
-
-#ifndef TMD_CMD_H
-#define TMD_CMD_H
-
-extern void tmd_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs);
-extern struct drm_display_mode *tmd_cmd_get_config_mode(struct drm_device *dev);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
-*/
-
-#ifndef TMD_VID_H
-#define TMD_VID_H
-
-extern void tmd_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs);
-extern struct drm_display_mode *tmd_vid_get_config_mode(struct drm_device *dev);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
-*/
-
-#ifndef TPO_CMD_H
-#define TPO_CMD_H
-
-extern void tpo_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs);
-/* extern struct drm_display_mode * */
-/* tpo_cmd_get_config_mode(struct drm_device *dev); */
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
- */
-
-#ifndef TPO_VID_H
-#define TPO_VID_H
-
-extern void tpo_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs);
-
-#endif
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2007-2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/console.h>
-
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include <drm/drm_crtc.h>
-#include <drm/drm_fb_helper.h>
-
-#include "psb_drv.h"
-#include "psb_intel_reg.h"
-#include "psb_intel_drv.h"
-#include "framebuffer.h"
-#include "gtt.h"
-
-#include "mdfld_output.h"
-
-static void psb_user_framebuffer_destroy(struct drm_framebuffer *fb);
-static int psb_user_framebuffer_create_handle(struct drm_framebuffer *fb,
- struct drm_file *file_priv,
- unsigned int *handle);
-
-static const struct drm_framebuffer_funcs psb_fb_funcs = {
- .destroy = psb_user_framebuffer_destroy,
- .create_handle = psb_user_framebuffer_create_handle,
-};
-
-#define CMAP_TOHW(_val, _width) ((((_val) << (_width)) + 0x7FFF - (_val)) >> 16)
-
-static int psbfb_setcolreg(unsigned regno, unsigned red, unsigned green,
- unsigned blue, unsigned transp,
- struct fb_info *info)
-{
- struct psb_fbdev *fbdev = info->par;
- struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb;
- uint32_t v;
-
- if (!fb)
- return -ENOMEM;
-
- if (regno > 255)
- return 1;
-
- red = CMAP_TOHW(red, info->var.red.length);
- blue = CMAP_TOHW(blue, info->var.blue.length);
- green = CMAP_TOHW(green, info->var.green.length);
- transp = CMAP_TOHW(transp, info->var.transp.length);
-
- v = (red << info->var.red.offset) |
- (green << info->var.green.offset) |
- (blue << info->var.blue.offset) |
- (transp << info->var.transp.offset);
-
- if (regno < 16) {
- switch (fb->bits_per_pixel) {
- case 16:
- ((uint32_t *) info->pseudo_palette)[regno] = v;
- break;
- case 24:
- case 32:
- ((uint32_t *) info->pseudo_palette)[regno] = v;
- break;
- }
- }
-
- return 0;
-}
-
-static int psbfb_pan(struct fb_var_screeninfo *var, struct fb_info *info)
-{
- struct psb_fbdev *fbdev = info->par;
- struct psb_framebuffer *psbfb = &fbdev->pfb;
- struct drm_device *dev = psbfb->base.dev;
-
- /*
- * We have to poke our nose in here. The core fb code assumes
- * panning is part of the hardware that can be invoked before
- * the actual fb is mapped. In our case that isn't quite true.
- */
- if (psbfb->gtt->npage)
- psb_gtt_roll(dev, psbfb->gtt, var->yoffset);
- return 0;
-}
-
-void psbfb_suspend(struct drm_device *dev)
-{
- struct drm_framebuffer *fb = 0;
- struct psb_framebuffer *psbfb = to_psb_fb(fb);
-
- console_lock();
- mutex_lock(&dev->mode_config.mutex);
- list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
- struct fb_info *info = psbfb->fbdev;
- fb_set_suspend(info, 1);
- drm_fb_helper_blank(FB_BLANK_POWERDOWN, info);
- }
- mutex_unlock(&dev->mode_config.mutex);
- console_unlock();
-}
-
-void psbfb_resume(struct drm_device *dev)
-{
- struct drm_framebuffer *fb = 0;
- struct psb_framebuffer *psbfb = to_psb_fb(fb);
-
- console_lock();
- mutex_lock(&dev->mode_config.mutex);
- list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
- struct fb_info *info = psbfb->fbdev;
- fb_set_suspend(info, 0);
- drm_fb_helper_blank(FB_BLANK_UNBLANK, info);
- }
- mutex_unlock(&dev->mode_config.mutex);
- console_unlock();
- drm_helper_disable_unused_functions(dev);
-}
-
-static int psbfb_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
-{
- struct psb_framebuffer *psbfb = vma->vm_private_data;
- struct drm_device *dev = psbfb->base.dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- int page_num;
- int i;
- unsigned long address;
- int ret;
- unsigned long pfn;
- /* FIXME: assumes fb at stolen base which may not be true */
- unsigned long phys_addr = (unsigned long)dev_priv->stolen_base;
-
- page_num = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
- address = (unsigned long)vmf->virtual_address;
-
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
- for (i = 0; i < page_num; i++) {
- pfn = (phys_addr >> PAGE_SHIFT);
-
- ret = vm_insert_mixed(vma, address, pfn);
- if (unlikely((ret == -EBUSY) || (ret != 0 && i > 0)))
- break;
- else if (unlikely(ret != 0)) {
- ret = (ret == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS;
- return ret;
- }
- address += PAGE_SIZE;
- phys_addr += PAGE_SIZE;
- }
- return VM_FAULT_NOPAGE;
-}
-
-static void psbfb_vm_open(struct vm_area_struct *vma)
-{
-}
-
-static void psbfb_vm_close(struct vm_area_struct *vma)
-{
-}
-
-static struct vm_operations_struct psbfb_vm_ops = {
- .fault = psbfb_vm_fault,
- .open = psbfb_vm_open,
- .close = psbfb_vm_close
-};
-
-static int psbfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
- struct psb_fbdev *fbdev = info->par;
- struct psb_framebuffer *psbfb = &fbdev->pfb;
-
- if (vma->vm_pgoff != 0)
- return -EINVAL;
- if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
- return -EINVAL;
-
- if (!psbfb->addr_space)
- psbfb->addr_space = vma->vm_file->f_mapping;
- /*
- * If this is a GEM object then info->screen_base is the virtual
- * kernel remapping of the object. FIXME: Review if this is
- * suitable for our mmap work
- */
- vma->vm_ops = &psbfb_vm_ops;
- vma->vm_private_data = (void *)psbfb;
- vma->vm_flags |= VM_RESERVED | VM_IO |
- VM_MIXEDMAP | VM_DONTEXPAND;
- return 0;
-}
-
-static int psbfb_ioctl(struct fb_info *info, unsigned int cmd,
- unsigned long arg)
-{
- return -ENOTTY;
-}
-
-static struct fb_ops psbfb_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = drm_fb_helper_check_var,
- .fb_set_par = drm_fb_helper_set_par,
- .fb_blank = drm_fb_helper_blank,
- .fb_setcolreg = psbfb_setcolreg,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = psbfb_copyarea,
- .fb_imageblit = cfb_imageblit,
- .fb_mmap = psbfb_mmap,
- .fb_sync = psbfb_sync,
- .fb_ioctl = psbfb_ioctl,
-};
-
-static struct fb_ops psbfb_roll_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = drm_fb_helper_check_var,
- .fb_set_par = drm_fb_helper_set_par,
- .fb_blank = drm_fb_helper_blank,
- .fb_setcolreg = psbfb_setcolreg,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
- .fb_pan_display = psbfb_pan,
- .fb_mmap = psbfb_mmap,
- .fb_sync = psbfb_sync,
- .fb_ioctl = psbfb_ioctl,
-};
-
-static struct fb_ops psbfb_unaccel_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = drm_fb_helper_check_var,
- .fb_set_par = drm_fb_helper_set_par,
- .fb_blank = drm_fb_helper_blank,
- .fb_setcolreg = psbfb_setcolreg,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
- .fb_mmap = psbfb_mmap,
- .fb_ioctl = psbfb_ioctl,
-};
-
-/**
- * psb_framebuffer_init - initialize a framebuffer
- * @dev: our DRM device
- * @fb: framebuffer to set up
- * @mode_cmd: mode description
- * @gt: backing object
- *
- * Configure and fill in the boilerplate for our frame buffer. Return
- * 0 on success or an error code if we fail.
- */
-static int psb_framebuffer_init(struct drm_device *dev,
- struct psb_framebuffer *fb,
- struct drm_mode_fb_cmd2 *mode_cmd,
- struct gtt_range *gt)
-{
- u32 bpp, depth;
- int ret;
-
- drm_fb_get_bpp_depth(mode_cmd->pixel_format, &depth, &bpp);
-
- if (mode_cmd->pitches[0] & 63)
- return -EINVAL;
- switch (bpp) {
- case 8:
- case 16:
- case 24:
- case 32:
- break;
- default:
- return -EINVAL;
- }
- ret = drm_framebuffer_init(dev, &fb->base, &psb_fb_funcs);
- if (ret) {
- dev_err(dev->dev, "framebuffer init failed: %d\n", ret);
- return ret;
- }
- drm_helper_mode_fill_fb_struct(&fb->base, mode_cmd);
- fb->gtt = gt;
- return 0;
-}
-
-/**
- * psb_framebuffer_create - create a framebuffer backed by gt
- * @dev: our DRM device
- * @mode_cmd: the description of the requested mode
- * @gt: the backing object
- *
- * Create a framebuffer object backed by the gt, and fill in the
- * boilerplate required
- *
- * TODO: review object references
- */
-
-static struct drm_framebuffer *psb_framebuffer_create
- (struct drm_device *dev,
- struct drm_mode_fb_cmd2 *mode_cmd,
- struct gtt_range *gt)
-{
- struct psb_framebuffer *fb;
- int ret;
-
- fb = kzalloc(sizeof(*fb), GFP_KERNEL);
- if (!fb)
- return ERR_PTR(-ENOMEM);
-
- ret = psb_framebuffer_init(dev, fb, mode_cmd, gt);
- if (ret) {
- kfree(fb);
- return ERR_PTR(ret);
- }
- return &fb->base;
-}
-
-/**
- * psbfb_alloc - allocate frame buffer memory
- * @dev: the DRM device
- * @aligned_size: space needed
- * @force: fall back to GEM buffers if need be
- *
- * Allocate the frame buffer. In the usual case we get a GTT range that
- * is stolen memory backed and life is simple. If there isn't sufficient
- * stolen memory or the system has no stolen memory we allocate a range
- * and back it with a GEM object.
- *
- * In this case the GEM object has no handle.
- */
-static struct gtt_range *psbfb_alloc(struct drm_device *dev,
- int aligned_size, int force)
-{
- struct gtt_range *backing;
- /* Begin by trying to use stolen memory backing */
- backing = psb_gtt_alloc_range(dev, aligned_size, "fb", 1);
- if (backing) {
- if (drm_gem_private_object_init(dev,
- &backing->gem, aligned_size) == 0)
- return backing;
- psb_gtt_free_range(dev, backing);
- }
- if (!force)
- return NULL;
-
- /* Next try using GEM host memory */
- backing = psb_gtt_alloc_range(dev, aligned_size, "fb(gem)", 0);
- if (backing == NULL)
- return NULL;
-
- /* Now back it with an object */
- if (drm_gem_object_init(dev, &backing->gem, aligned_size) != 0) {
- psb_gtt_free_range(dev, backing);
- return NULL;
- }
- return backing;
-}
-
-/**
- * psbfb_create - create a framebuffer
- * @fbdev: the framebuffer device
- * @sizes: specification of the layout
- *
- * Create a framebuffer to the specifications provided
- */
-static int psbfb_create(struct psb_fbdev *fbdev,
- struct drm_fb_helper_surface_size *sizes)
-{
- struct drm_device *dev = fbdev->psb_fb_helper.dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct fb_info *info;
- struct drm_framebuffer *fb;
- struct psb_framebuffer *psbfb = &fbdev->pfb;
- struct drm_mode_fb_cmd2 mode_cmd;
- struct device *device = &dev->pdev->dev;
- int size;
- int ret;
- struct gtt_range *backing;
- int gtt_roll = 1;
- u32 bpp, depth;
-
- mode_cmd.width = sizes->surface_width;
- mode_cmd.height = sizes->surface_height;
- bpp = sizes->surface_bpp;
-
- /* No 24bit packed */
- if (bpp == 24)
- bpp = 32;
-
- /* Acceleration via the GTT requires pitch to be 4096 byte aligned
- (ie 1024 or 2048 pixels in normal use) */
- mode_cmd.pitches[0] = ALIGN(mode_cmd.width * ((bpp + 7) / 8), 4096);
- depth = sizes->surface_depth;
-
- size = mode_cmd.pitches[0] * mode_cmd.height;
- size = ALIGN(size, PAGE_SIZE);
-
- /* Allocate the framebuffer in the GTT with stolen page backing */
- backing = psbfb_alloc(dev, size, 0);
- if (backing == NULL) {
- /*
- * We couldn't get the space we wanted, fall back to the
- * display engine requirement instead. The HW requires
- * the pitch to be 64 byte aligned
- */
-
- gtt_roll = 0; /* Don't use GTT accelerated scrolling */
-
- mode_cmd.pitches[0] = ALIGN(mode_cmd.width * ((bpp + 7) / 8), 64);
- depth = sizes->surface_depth;
-
- size = mode_cmd.pitches[0] * mode_cmd.height;
- size = ALIGN(size, PAGE_SIZE);
-
- /* Allocate the framebuffer in the GTT with stolen page
- backing when there is room */
- backing = psbfb_alloc(dev, size, 1);
- if (backing == NULL)
- return -ENOMEM;
- }
-
- mutex_lock(&dev->struct_mutex);
-
- info = framebuffer_alloc(0, device);
- if (!info) {
- ret = -ENOMEM;
- goto out_err1;
- }
- info->par = fbdev;
-
- mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
-
- ret = psb_framebuffer_init(dev, psbfb, &mode_cmd, backing);
- if (ret)
- goto out_unref;
-
- fb = &psbfb->base;
- psbfb->fbdev = info;
-
- fbdev->psb_fb_helper.fb = fb;
- fbdev->psb_fb_helper.fbdev = info;
-
- strcpy(info->fix.id, "psbfb");
-
- info->flags = FBINFO_DEFAULT;
- if (gtt_roll) { /* GTT rolling seems best */
- info->fbops = &psbfb_roll_ops;
- info->flags |= FBINFO_HWACCEL_YPAN;
- }
- else if (dev_priv->ops->accel_2d) /* 2D engine */
- info->fbops = &psbfb_ops;
- else /* Software */
- info->fbops = &psbfb_unaccel_ops;
-
- ret = fb_alloc_cmap(&info->cmap, 256, 0);
- if (ret) {
- ret = -ENOMEM;
- goto out_unref;
- }
-
- info->fix.smem_start = dev->mode_config.fb_base;
- info->fix.smem_len = size;
- info->fix.ywrapstep = gtt_roll;
- info->fix.ypanstep = gtt_roll;
-
- if (backing->stolen) {
- /* Accessed stolen memory directly */
- info->screen_base = (char *)dev_priv->vram_addr +
- backing->offset;
- } else {
- /* Pin the pages into the GTT and create a mapping to them */
- psb_gtt_pin(backing);
- info->screen_base = vm_map_ram(backing->pages, backing->npage,
- -1, PAGE_KERNEL);
- if (info->screen_base == NULL) {
- psb_gtt_unpin(backing);
- ret = -ENOMEM;
- goto out_unref;
- }
- psbfb->vm_map = 1;
- }
- info->screen_size = size;
-
- if (dev_priv->gtt.stolen_size) {
- info->apertures = alloc_apertures(1);
- if (!info->apertures) {
- ret = -ENOMEM;
- goto out_unref;
- }
- info->apertures->ranges[0].base = dev->mode_config.fb_base;
- info->apertures->ranges[0].size = dev_priv->gtt.stolen_size;
- }
-
- drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
- drm_fb_helper_fill_var(info, &fbdev->psb_fb_helper,
- sizes->fb_width, sizes->fb_height);
-
- info->fix.mmio_start = pci_resource_start(dev->pdev, 0);
- info->fix.mmio_len = pci_resource_len(dev->pdev, 0);
-
- info->pixmap.size = 64 * 1024;
- info->pixmap.buf_align = 8;
- info->pixmap.access_align = 32;
- info->pixmap.flags = FB_PIXMAP_SYSTEM;
- info->pixmap.scan_align = 1;
-
- dev_info(dev->dev, "allocated %dx%d fb\n",
- psbfb->base.width, psbfb->base.height);
-
- mutex_unlock(&dev->struct_mutex);
- return 0;
-out_unref:
- if (backing->stolen)
- psb_gtt_free_range(dev, backing);
- else {
- if (psbfb->vm_map)
- vm_unmap_ram(info->screen_base, backing->npage);
- drm_gem_object_unreference(&backing->gem);
- }
-out_err1:
- mutex_unlock(&dev->struct_mutex);
- psb_gtt_free_range(dev, backing);
- return ret;
-}
-
-/**
- * psb_user_framebuffer_create - create framebuffer
- * @dev: our DRM device
- * @filp: client file
- * @cmd: mode request
- *
- * Create a new framebuffer backed by a userspace GEM object
- */
-static struct drm_framebuffer *psb_user_framebuffer_create
- (struct drm_device *dev, struct drm_file *filp,
- struct drm_mode_fb_cmd2 *cmd)
-{
- struct gtt_range *r;
- struct drm_gem_object *obj;
-
- /*
- * Find the GEM object and thus the gtt range object that is
- * to back this space
- */
- obj = drm_gem_object_lookup(dev, filp, cmd->handles[0]);
- if (obj == NULL)
- return ERR_PTR(-ENOENT);
-
- /* Let the core code do all the work */
- r = container_of(obj, struct gtt_range, gem);
- return psb_framebuffer_create(dev, cmd, r);
-}
-
-static void psbfb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
- u16 blue, int regno)
-{
-}
-
-static void psbfb_gamma_get(struct drm_crtc *crtc, u16 *red,
- u16 *green, u16 *blue, int regno)
-{
-}
-
-static int psbfb_probe(struct drm_fb_helper *helper,
- struct drm_fb_helper_surface_size *sizes)
-{
- struct psb_fbdev *psb_fbdev = (struct psb_fbdev *)helper;
- int new_fb = 0;
- int ret;
-
- if (!helper->fb) {
- ret = psbfb_create(psb_fbdev, sizes);
- if (ret)
- return ret;
- new_fb = 1;
- }
- return new_fb;
-}
-
-struct drm_fb_helper_funcs psb_fb_helper_funcs = {
- .gamma_set = psbfb_gamma_set,
- .gamma_get = psbfb_gamma_get,
- .fb_probe = psbfb_probe,
-};
-
-int psb_fbdev_destroy(struct drm_device *dev, struct psb_fbdev *fbdev)
-{
- struct fb_info *info;
- struct psb_framebuffer *psbfb = &fbdev->pfb;
-
- if (fbdev->psb_fb_helper.fbdev) {
- info = fbdev->psb_fb_helper.fbdev;
-
- /* If this is our base framebuffer then kill any virtual map
- for the framebuffer layer and unpin it */
- if (psbfb->vm_map) {
- vm_unmap_ram(info->screen_base, psbfb->gtt->npage);
- psb_gtt_unpin(psbfb->gtt);
- }
- unregister_framebuffer(info);
- if (info->cmap.len)
- fb_dealloc_cmap(&info->cmap);
- framebuffer_release(info);
- }
- drm_fb_helper_fini(&fbdev->psb_fb_helper);
- drm_framebuffer_cleanup(&psbfb->base);
-
- if (psbfb->gtt)
- drm_gem_object_unreference(&psbfb->gtt->gem);
- return 0;
-}
-
-int psb_fbdev_init(struct drm_device *dev)
-{
- struct psb_fbdev *fbdev;
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- fbdev = kzalloc(sizeof(struct psb_fbdev), GFP_KERNEL);
- if (!fbdev) {
- dev_err(dev->dev, "no memory\n");
- return -ENOMEM;
- }
-
- dev_priv->fbdev = fbdev;
- fbdev->psb_fb_helper.funcs = &psb_fb_helper_funcs;
-
- drm_fb_helper_init(dev, &fbdev->psb_fb_helper, dev_priv->ops->crtcs,
- INTELFB_CONN_LIMIT);
-
- drm_fb_helper_single_add_all_connectors(&fbdev->psb_fb_helper);
- drm_fb_helper_initial_config(&fbdev->psb_fb_helper, 32);
- return 0;
-}
-
-void psb_fbdev_fini(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (!dev_priv->fbdev)
- return;
-
- psb_fbdev_destroy(dev, dev_priv->fbdev);
- kfree(dev_priv->fbdev);
- dev_priv->fbdev = NULL;
-}
-
-static void psbfb_output_poll_changed(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_fbdev *fbdev = (struct psb_fbdev *)dev_priv->fbdev;
- drm_fb_helper_hotplug_event(&fbdev->psb_fb_helper);
-}
-
-/**
- * psb_user_framebuffer_create_handle - add hamdle to a framebuffer
- * @fb: framebuffer
- * @file_priv: our DRM file
- * @handle: returned handle
- *
- * Our framebuffer object is a GTT range which also contains a GEM
- * object. We need to turn it into a handle for userspace. GEM will do
- * the work for us
- */
-static int psb_user_framebuffer_create_handle(struct drm_framebuffer *fb,
- struct drm_file *file_priv,
- unsigned int *handle)
-{
- struct psb_framebuffer *psbfb = to_psb_fb(fb);
- struct gtt_range *r = psbfb->gtt;
- return drm_gem_handle_create(file_priv, &r->gem, handle);
-}
-
-/**
- * psb_user_framebuffer_destroy - destruct user created fb
- * @fb: framebuffer
- *
- * User framebuffers are backed by GEM objects so all we have to do is
- * clean up a bit and drop the reference, GEM will handle the fallout
- */
-static void psb_user_framebuffer_destroy(struct drm_framebuffer *fb)
-{
- struct psb_framebuffer *psbfb = to_psb_fb(fb);
- struct gtt_range *r = psbfb->gtt;
- struct drm_device *dev = fb->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_fbdev *fbdev = dev_priv->fbdev;
- struct drm_crtc *crtc;
- int reset = 0;
-
- /* Should never get stolen memory for a user fb */
- WARN_ON(r->stolen);
-
- /* Check if we are erroneously live */
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
- if (crtc->fb == fb)
- reset = 1;
-
- if (reset)
- /*
- * Now force a sane response before we permit the DRM CRTC
- * layer to do stupid things like blank the display. Instead
- * we reset this framebuffer as if the user had forced a reset.
- * We must do this before the cleanup so that the DRM layer
- * doesn't get a chance to stick its oar in where it isn't
- * wanted.
- */
- drm_fb_helper_restore_fbdev_mode(&fbdev->psb_fb_helper);
-
- /* Let DRM do its clean up */
- drm_framebuffer_cleanup(fb);
- /* We are no longer using the resource in GEM */
- drm_gem_object_unreference_unlocked(&r->gem);
- kfree(fb);
-}
-
-static const struct drm_mode_config_funcs psb_mode_funcs = {
- .fb_create = psb_user_framebuffer_create,
- .output_poll_changed = psbfb_output_poll_changed,
-};
-
-static int psb_create_backlight_property(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct drm_property *backlight;
-
- if (dev_priv->backlight_property)
- return 0;
-
- backlight = drm_property_create(dev, DRM_MODE_PROP_RANGE,
- "backlight", 2);
- backlight->values[0] = 0;
- backlight->values[1] = 100;
-
- dev_priv->backlight_property = backlight;
-
- return 0;
-}
-
-static void psb_setup_outputs(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct drm_connector *connector;
-
- drm_mode_create_scaling_mode_property(dev);
- psb_create_backlight_property(dev);
-
- dev_priv->ops->output_init(dev);
-
- list_for_each_entry(connector, &dev->mode_config.connector_list,
- head) {
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- struct drm_encoder *encoder = &psb_intel_output->enc;
- int crtc_mask = 0, clone_mask = 0;
-
- /* valid crtcs */
- switch (psb_intel_output->type) {
- case INTEL_OUTPUT_ANALOG:
- crtc_mask = (1 << 0);
- clone_mask = (1 << INTEL_OUTPUT_ANALOG);
- break;
- case INTEL_OUTPUT_SDVO:
- crtc_mask = ((1 << 0) | (1 << 1));
- clone_mask = (1 << INTEL_OUTPUT_SDVO);
- break;
- case INTEL_OUTPUT_LVDS:
- if (IS_MRST(dev))
- crtc_mask = (1 << 0);
- else
- crtc_mask = (1 << 1);
- clone_mask = (1 << INTEL_OUTPUT_LVDS);
- break;
- case INTEL_OUTPUT_MIPI:
- crtc_mask = (1 << 0);
- clone_mask = (1 << INTEL_OUTPUT_MIPI);
- break;
- case INTEL_OUTPUT_MIPI2:
- crtc_mask = (1 << 2);
- clone_mask = (1 << INTEL_OUTPUT_MIPI2);
- break;
- case INTEL_OUTPUT_HDMI:
- /* HDMI on crtc 1 for SoC devices and crtc 0 for
- Cedarview. HDMI on Poulsbo is only via external
- logic */
- if (IS_MFLD(dev) || IS_MRST(dev))
- crtc_mask = (1 << 1);
- else
- crtc_mask = (1 << 0); /* Cedarview */
- clone_mask = (1 << INTEL_OUTPUT_HDMI);
- break;
- }
- encoder->possible_crtcs = crtc_mask;
- encoder->possible_clones =
- psb_intel_connector_clones(dev, clone_mask);
- }
-}
-
-void psb_modeset_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *) dev->dev_private;
- struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
- int i;
-
- drm_mode_config_init(dev);
-
- dev->mode_config.min_width = 0;
- dev->mode_config.min_height = 0;
-
- dev->mode_config.funcs = (void *) &psb_mode_funcs;
-
- /* set memory base */
- /* MRST and PSB should use BAR 2*/
- pci_read_config_dword(dev->pdev, PSB_BSM, (u32 *)
- &(dev->mode_config.fb_base));
-
- /* num pipes is 2 for PSB but 1 for Mrst */
- for (i = 0; i < dev_priv->num_pipe; i++)
- psb_intel_crtc_init(dev, i, mode_dev);
-
- dev->mode_config.max_width = 2048;
- dev->mode_config.max_height = 2048;
-
- psb_setup_outputs(dev);
-}
-
-void psb_modeset_cleanup(struct drm_device *dev)
-{
- mutex_lock(&dev->struct_mutex);
-
- drm_kms_helper_poll_fini(dev);
- psb_fbdev_fini(dev);
- drm_mode_config_cleanup(dev);
-
- mutex_unlock(&dev->struct_mutex);
-}
+++ /dev/null
-/*
- * Copyright (c) 2008-2011, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- *
- */
-
-#ifndef _FRAMEBUFFER_H_
-#define _FRAMEBUFFER_H_
-
-#include <drm/drmP.h>
-#include <drm/drm_fb_helper.h>
-
-#include "psb_drv.h"
-
-struct psb_framebuffer {
- struct drm_framebuffer base;
- struct address_space *addr_space;
- struct fb_info *fbdev;
- struct gtt_range *gtt;
- bool vm_map; /* True if we must undo a vm_map_ram */
-};
-
-struct psb_fbdev {
- struct drm_fb_helper psb_fb_helper;
- struct psb_framebuffer pfb;
-};
-
-#define to_psb_fb(x) container_of(x, struct psb_framebuffer, base)
-
-extern int psb_intel_connector_clones(struct drm_device *dev, int type_mask);
-
-#endif
-
+++ /dev/null
-/*
- * psb GEM interface
- *
- * Copyright (c) 2011, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors: Alan Cox
- *
- * TODO:
- * - we need to work out if the MMU is relevant (eg for
- * accelerated operations on a GEM object)
- */
-
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include "psb_drm.h"
-#include "psb_drv.h"
-
-int psb_gem_init_object(struct drm_gem_object *obj)
-{
- return -EINVAL;
-}
-
-void psb_gem_free_object(struct drm_gem_object *obj)
-{
- struct gtt_range *gtt = container_of(obj, struct gtt_range, gem);
- drm_gem_object_release_wrap(obj);
- /* This must occur last as it frees up the memory of the GEM object */
- psb_gtt_free_range(obj->dev, gtt);
-}
-
-int psb_gem_get_aperture(struct drm_device *dev, void *data,
- struct drm_file *file)
-{
- return -EINVAL;
-}
-
-/**
- * psb_gem_dumb_map_gtt - buffer mapping for dumb interface
- * @file: our drm client file
- * @dev: drm device
- * @handle: GEM handle to the object (from dumb_create)
- *
- * Do the necessary setup to allow the mapping of the frame buffer
- * into user memory. We don't have to do much here at the moment.
- */
-int psb_gem_dumb_map_gtt(struct drm_file *file, struct drm_device *dev,
- uint32_t handle, uint64_t *offset)
-{
- int ret = 0;
- struct drm_gem_object *obj;
-
- if (!(dev->driver->driver_features & DRIVER_GEM))
- return -ENODEV;
-
- mutex_lock(&dev->struct_mutex);
-
- /* GEM does all our handle to object mapping */
- obj = drm_gem_object_lookup(dev, file, handle);
- if (obj == NULL) {
- ret = -ENOENT;
- goto unlock;
- }
- /* What validation is needed here ? */
-
- /* Make it mmapable */
- if (!obj->map_list.map) {
- ret = gem_create_mmap_offset(obj);
- if (ret)
- goto out;
- }
- /* GEM should really work out the hash offsets for us */
- *offset = (u64)obj->map_list.hash.key << PAGE_SHIFT;
-out:
- drm_gem_object_unreference(obj);
-unlock:
- mutex_unlock(&dev->struct_mutex);
- return ret;
-}
-
-/**
- * psb_gem_create - create a mappable object
- * @file: the DRM file of the client
- * @dev: our device
- * @size: the size requested
- * @handlep: returned handle (opaque number)
- *
- * Create a GEM object, fill in the boilerplate and attach a handle to
- * it so that userspace can speak about it. This does the core work
- * for the various methods that do/will create GEM objects for things
- */
-static int psb_gem_create(struct drm_file *file,
- struct drm_device *dev, uint64_t size, uint32_t *handlep)
-{
- struct gtt_range *r;
- int ret;
- u32 handle;
-
- size = roundup(size, PAGE_SIZE);
-
- /* Allocate our object - for now a direct gtt range which is not
- stolen memory backed */
- r = psb_gtt_alloc_range(dev, size, "gem", 0);
- if (r == NULL) {
- dev_err(dev->dev, "no memory for %lld byte GEM object\n", size);
- return -ENOSPC;
- }
- /* Initialize the extra goodies GEM needs to do all the hard work */
- if (drm_gem_object_init(dev, &r->gem, size) != 0) {
- psb_gtt_free_range(dev, r);
- /* GEM doesn't give an error code so use -ENOMEM */
- dev_err(dev->dev, "GEM init failed for %lld\n", size);
- return -ENOMEM;
- }
- /* Give the object a handle so we can carry it more easily */
- ret = drm_gem_handle_create(file, &r->gem, &handle);
- if (ret) {
- dev_err(dev->dev, "GEM handle failed for %p, %lld\n",
- &r->gem, size);
- drm_gem_object_release(&r->gem);
- psb_gtt_free_range(dev, r);
- return ret;
- }
- /* We have the initial and handle reference but need only one now */
- drm_gem_object_unreference(&r->gem);
- *handlep = handle;
- return 0;
-}
-
-/**
- * psb_gem_dumb_create - create a dumb buffer
- * @drm_file: our client file
- * @dev: our device
- * @args: the requested arguments copied from userspace
- *
- * Allocate a buffer suitable for use for a frame buffer of the
- * form described by user space. Give userspace a handle by which
- * to reference it.
- */
-int psb_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
- struct drm_mode_create_dumb *args)
-{
- args->pitch = ALIGN(args->width * ((args->bpp + 7) / 8), 64);
- args->size = args->pitch * args->height;
- return psb_gem_create(file, dev, args->size, &args->handle);
-}
-
-/**
- * psb_gem_dumb_destroy - destroy a dumb buffer
- * @file: client file
- * @dev: our DRM device
- * @handle: the object handle
- *
- * Destroy a handle that was created via psb_gem_dumb_create, at least
- * we hope it was created that way. i915 seems to assume the caller
- * does the checking but that might be worth review ! FIXME
- */
-int psb_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
- uint32_t handle)
-{
- /* No special work needed, drop the reference and see what falls out */
- return drm_gem_handle_delete(file, handle);
-}
-
-/**
- * psb_gem_fault - pagefault handler for GEM objects
- * @vma: the VMA of the GEM object
- * @vmf: fault detail
- *
- * Invoked when a fault occurs on an mmap of a GEM managed area. GEM
- * does most of the work for us including the actual map/unmap calls
- * but we need to do the actual page work.
- *
- * This code eventually needs to handle faulting objects in and out
- * of the GTT and repacking it when we run out of space. We can put
- * that off for now and for our simple uses
- *
- * The VMA was set up by GEM. In doing so it also ensured that the
- * vma->vm_private_data points to the GEM object that is backing this
- * mapping.
- */
-int psb_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
-{
- struct drm_gem_object *obj;
- struct gtt_range *r;
- int ret;
- unsigned long pfn;
- pgoff_t page_offset;
- struct drm_device *dev;
- struct drm_psb_private *dev_priv;
-
- obj = vma->vm_private_data; /* GEM object */
- dev = obj->dev;
- dev_priv = dev->dev_private;
-
- r = container_of(obj, struct gtt_range, gem); /* Get the gtt range */
-
- /* Make sure we don't parallel update on a fault, nor move or remove
- something from beneath our feet */
- mutex_lock(&dev->struct_mutex);
-
- /* For now the mmap pins the object and it stays pinned. As things
- stand that will do us no harm */
- if (r->mmapping == 0) {
- ret = psb_gtt_pin(r);
- if (ret < 0) {
- dev_err(dev->dev, "gma500: pin failed: %d\n", ret);
- goto fail;
- }
- r->mmapping = 1;
- }
-
- /* Page relative to the VMA start - we must calculate this ourselves
- because vmf->pgoff is the fake GEM offset */
- page_offset = ((unsigned long) vmf->virtual_address - vma->vm_start)
- >> PAGE_SHIFT;
-
- /* CPU view of the page, don't go via the GART for CPU writes */
- if (r->stolen)
- pfn = (dev_priv->stolen_base + r->offset) >> PAGE_SHIFT;
- else
- pfn = page_to_pfn(r->pages[page_offset]);
- ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn);
-
-fail:
- mutex_unlock(&dev->struct_mutex);
- switch (ret) {
- case 0:
- case -ERESTARTSYS:
- case -EINTR:
- return VM_FAULT_NOPAGE;
- case -ENOMEM:
- return VM_FAULT_OOM;
- default:
- return VM_FAULT_SIGBUS;
- }
-}
-
-static int psb_gem_create_stolen(struct drm_file *file, struct drm_device *dev,
- int size, u32 *handle)
-{
- struct gtt_range *gtt = psb_gtt_alloc_range(dev, size, "gem", 1);
- if (gtt == NULL)
- return -ENOMEM;
- if (drm_gem_private_object_init(dev, >t->gem, size) != 0)
- goto free_gtt;
- if (drm_gem_handle_create(file, >t->gem, handle) == 0)
- return 0;
-free_gtt:
- psb_gtt_free_range(dev, gtt);
- return -ENOMEM;
-}
-
-/*
- * GEM interfaces for our specific client
- */
-int psb_gem_create_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file)
-{
- struct drm_psb_gem_create *args = data;
- int ret;
- if (args->flags & PSB_GEM_CREATE_STOLEN) {
- ret = psb_gem_create_stolen(file, dev, args->size,
- &args->handle);
- if (ret == 0)
- return 0;
- /* Fall throguh */
- args->flags &= ~PSB_GEM_CREATE_STOLEN;
- }
- return psb_gem_create(file, dev, args->size, &args->handle);
-}
-
-int psb_gem_mmap_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file)
-{
- struct drm_psb_gem_mmap *args = data;
- return dev->driver->dumb_map_offset(file, dev,
- args->handle, &args->offset);
-}
-
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-#include <drm/drmP.h>
-#include <drm/drm.h>
-
-void drm_gem_object_release_wrap(struct drm_gem_object *obj)
-{
- /* Remove the list map if one is present */
- if (obj->map_list.map) {
- struct drm_gem_mm *mm = obj->dev->mm_private;
- struct drm_map_list *list = &obj->map_list;
- drm_ht_remove_item(&mm->offset_hash, &list->hash);
- drm_mm_put_block(list->file_offset_node);
- kfree(list->map);
- list->map = NULL;
- }
- drm_gem_object_release(obj);
-}
-
-/**
- * gem_create_mmap_offset - invent an mmap offset
- * @obj: our object
- *
- * Standard implementation of offset generation for mmap as is
- * duplicated in several drivers. This belongs in GEM.
- */
-int gem_create_mmap_offset(struct drm_gem_object *obj)
-{
- struct drm_device *dev = obj->dev;
- struct drm_gem_mm *mm = dev->mm_private;
- struct drm_map_list *list;
- struct drm_local_map *map;
- int ret;
-
- list = &obj->map_list;
- list->map = kzalloc(sizeof(struct drm_map_list), GFP_KERNEL);
- if (list->map == NULL)
- return -ENOMEM;
- map = list->map;
- map->type = _DRM_GEM;
- map->size = obj->size;
- map->handle = obj;
-
- list->file_offset_node = drm_mm_search_free(&mm->offset_manager,
- obj->size / PAGE_SIZE, 0, 0);
- if (!list->file_offset_node) {
- dev_err(dev->dev, "failed to allocate offset for bo %d\n",
- obj->name);
- ret = -ENOSPC;
- goto free_it;
- }
- list->file_offset_node = drm_mm_get_block(list->file_offset_node,
- obj->size / PAGE_SIZE, 0);
- if (!list->file_offset_node) {
- ret = -ENOMEM;
- goto free_it;
- }
- list->hash.key = list->file_offset_node->start;
- ret = drm_ht_insert_item(&mm->offset_hash, &list->hash);
- if (ret) {
- dev_err(dev->dev, "failed to add to map hash\n");
- goto free_mm;
- }
- return 0;
-
-free_mm:
- drm_mm_put_block(list->file_offset_node);
-free_it:
- kfree(list->map);
- list->map = NULL;
- return ret;
-}
+++ /dev/null
-extern void drm_gem_object_release_wrap(struct drm_gem_object *obj);
-extern int gem_create_mmap_offset(struct drm_gem_object *obj);
+++ /dev/null
-/*
- * Copyright (c) 2007, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors: Thomas Hellstrom <thomas-at-tungstengraphics.com>
- * Alan Cox <alan@linux.intel.com>
- */
-
-#include <drm/drmP.h>
-#include "psb_drv.h"
-
-
-/*
- * GTT resource allocator - manage page mappings in GTT space
- */
-
-/**
- * psb_gtt_mask_pte - generate GTT pte entry
- * @pfn: page number to encode
- * @type: type of memory in the GTT
- *
- * Set the GTT entry for the appropriate memory type.
- */
-static inline uint32_t psb_gtt_mask_pte(uint32_t pfn, int type)
-{
- uint32_t mask = PSB_PTE_VALID;
-
- if (type & PSB_MMU_CACHED_MEMORY)
- mask |= PSB_PTE_CACHED;
- if (type & PSB_MMU_RO_MEMORY)
- mask |= PSB_PTE_RO;
- if (type & PSB_MMU_WO_MEMORY)
- mask |= PSB_PTE_WO;
-
- return (pfn << PAGE_SHIFT) | mask;
-}
-
-/**
- * psb_gtt_entry - find the GTT entries for a gtt_range
- * @dev: our DRM device
- * @r: our GTT range
- *
- * Given a gtt_range object return the GTT offset of the page table
- * entries for this gtt_range
- */
-u32 *psb_gtt_entry(struct drm_device *dev, struct gtt_range *r)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- unsigned long offset;
-
- offset = r->resource.start - dev_priv->gtt_mem->start;
-
- return dev_priv->gtt_map + (offset >> PAGE_SHIFT);
-}
-
-/**
- * psb_gtt_insert - put an object into the GTT
- * @dev: our DRM device
- * @r: our GTT range
- *
- * Take our preallocated GTT range and insert the GEM object into
- * the GTT. This is protected via the gtt mutex which the caller
- * must hold.
- */
-static int psb_gtt_insert(struct drm_device *dev, struct gtt_range *r)
-{
- u32 *gtt_slot, pte;
- struct page **pages;
- int i;
-
- if (r->pages == NULL) {
- WARN_ON(1);
- return -EINVAL;
- }
-
- WARN_ON(r->stolen); /* refcount these maybe ? */
-
- gtt_slot = psb_gtt_entry(dev, r);
- pages = r->pages;
-
- /* Make sure changes are visible to the GPU */
- set_pages_array_uc(pages, r->npage);
-
- /* Write our page entries into the GTT itself */
- for (i = r->roll; i < r->npage; i++) {
- pte = psb_gtt_mask_pte(page_to_pfn(r->pages[i]), 0);
- iowrite32(pte, gtt_slot++);
- }
- for (i = 0; i < r->roll; i++) {
- pte = psb_gtt_mask_pte(page_to_pfn(r->pages[i]), 0);
- iowrite32(pte, gtt_slot++);
- }
- /* Make sure all the entries are set before we return */
- ioread32(gtt_slot - 1);
-
- return 0;
-}
-
-/**
- * psb_gtt_remove - remove an object from the GTT
- * @dev: our DRM device
- * @r: our GTT range
- *
- * Remove a preallocated GTT range from the GTT. Overwrite all the
- * page table entries with the dummy page. This is protected via the gtt
- * mutex which the caller must hold.
- */
-static void psb_gtt_remove(struct drm_device *dev, struct gtt_range *r)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 *gtt_slot, pte;
- int i;
-
- WARN_ON(r->stolen);
-
- gtt_slot = psb_gtt_entry(dev, r);
- pte = psb_gtt_mask_pte(page_to_pfn(dev_priv->scratch_page), 0);
-
- for (i = 0; i < r->npage; i++)
- iowrite32(pte, gtt_slot++);
- ioread32(gtt_slot - 1);
- set_pages_array_wb(r->pages, r->npage);
-}
-
-/**
- * psb_gtt_roll - set scrolling position
- * @dev: our DRM device
- * @r: the gtt mapping we are using
- * @roll: roll offset
- *
- * Roll an existing pinned mapping by moving the pages through the GTT.
- * This allows us to implement hardware scrolling on the consoles without
- * a 2D engine
- */
-void psb_gtt_roll(struct drm_device *dev, struct gtt_range *r, int roll)
-{
- u32 *gtt_slot, pte;
- int i;
-
- if (roll >= r->npage) {
- WARN_ON(1);
- return;
- }
-
- r->roll = roll;
-
- /* Not currently in the GTT - no worry we will write the mapping at
- the right position when it gets pinned */
- if (!r->stolen && !r->in_gart)
- return;
-
- gtt_slot = psb_gtt_entry(dev, r);
-
- for (i = r->roll; i < r->npage; i++) {
- pte = psb_gtt_mask_pte(page_to_pfn(r->pages[i]), 0);
- iowrite32(pte, gtt_slot++);
- }
- for (i = 0; i < r->roll; i++) {
- pte = psb_gtt_mask_pte(page_to_pfn(r->pages[i]), 0);
- iowrite32(pte, gtt_slot++);
- }
- ioread32(gtt_slot - 1);
-}
-
-/**
- * psb_gtt_attach_pages - attach and pin GEM pages
- * @gt: the gtt range
- *
- * Pin and build an in kernel list of the pages that back our GEM object.
- * While we hold this the pages cannot be swapped out. This is protected
- * via the gtt mutex which the caller must hold.
- */
-static int psb_gtt_attach_pages(struct gtt_range *gt)
-{
- struct inode *inode;
- struct address_space *mapping;
- int i;
- struct page *p;
- int pages = gt->gem.size / PAGE_SIZE;
-
- WARN_ON(gt->pages);
-
- /* This is the shared memory object that backs the GEM resource */
- inode = gt->gem.filp->f_path.dentry->d_inode;
- mapping = inode->i_mapping;
-
- gt->pages = kmalloc(pages * sizeof(struct page *), GFP_KERNEL);
- if (gt->pages == NULL)
- return -ENOMEM;
- gt->npage = pages;
-
- for (i = 0; i < pages; i++) {
- /* FIXME: needs updating as per mail from Hugh Dickins */
- p = read_cache_page_gfp(mapping, i,
- __GFP_COLD | GFP_KERNEL);
- if (IS_ERR(p))
- goto err;
- gt->pages[i] = p;
- }
- return 0;
-
-err:
- while (i--)
- page_cache_release(gt->pages[i]);
- kfree(gt->pages);
- gt->pages = NULL;
- return PTR_ERR(p);
-}
-
-/**
- * psb_gtt_detach_pages - attach and pin GEM pages
- * @gt: the gtt range
- *
- * Undo the effect of psb_gtt_attach_pages. At this point the pages
- * must have been removed from the GTT as they could now be paged out
- * and move bus address. This is protected via the gtt mutex which the
- * caller must hold.
- */
-static void psb_gtt_detach_pages(struct gtt_range *gt)
-{
- int i;
- for (i = 0; i < gt->npage; i++) {
- /* FIXME: do we need to force dirty */
- set_page_dirty(gt->pages[i]);
- page_cache_release(gt->pages[i]);
- }
- kfree(gt->pages);
- gt->pages = NULL;
-}
-
-/**
- * psb_gtt_pin - pin pages into the GTT
- * @gt: range to pin
- *
- * Pin a set of pages into the GTT. The pins are refcounted so that
- * multiple pins need multiple unpins to undo.
- *
- * Non GEM backed objects treat this as a no-op as they are always GTT
- * backed objects.
- */
-int psb_gtt_pin(struct gtt_range *gt)
-{
- int ret = 0;
- struct drm_device *dev = gt->gem.dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- mutex_lock(&dev_priv->gtt_mutex);
-
- if (gt->in_gart == 0 && gt->stolen == 0) {
- ret = psb_gtt_attach_pages(gt);
- if (ret < 0)
- goto out;
- ret = psb_gtt_insert(dev, gt);
- if (ret < 0) {
- psb_gtt_detach_pages(gt);
- goto out;
- }
- }
- gt->in_gart++;
-out:
- mutex_unlock(&dev_priv->gtt_mutex);
- return ret;
-}
-
-/**
- * psb_gtt_unpin - Drop a GTT pin requirement
- * @gt: range to pin
- *
- * Undoes the effect of psb_gtt_pin. On the last drop the GEM object
- * will be removed from the GTT which will also drop the page references
- * and allow the VM to clean up or page stuff.
- *
- * Non GEM backed objects treat this as a no-op as they are always GTT
- * backed objects.
- */
-void psb_gtt_unpin(struct gtt_range *gt)
-{
- struct drm_device *dev = gt->gem.dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- mutex_lock(&dev_priv->gtt_mutex);
-
- WARN_ON(!gt->in_gart);
-
- gt->in_gart--;
- if (gt->in_gart == 0 && gt->stolen == 0) {
- psb_gtt_remove(dev, gt);
- psb_gtt_detach_pages(gt);
- }
- mutex_unlock(&dev_priv->gtt_mutex);
-}
-
-/*
- * GTT resource allocator - allocate and manage GTT address space
- */
-
-/**
- * psb_gtt_alloc_range - allocate GTT address space
- * @dev: Our DRM device
- * @len: length (bytes) of address space required
- * @name: resource name
- * @backed: resource should be backed by stolen pages
- *
- * Ask the kernel core to find us a suitable range of addresses
- * to use for a GTT mapping.
- *
- * Returns a gtt_range structure describing the object, or NULL on
- * error. On successful return the resource is both allocated and marked
- * as in use.
- */
-struct gtt_range *psb_gtt_alloc_range(struct drm_device *dev, int len,
- const char *name, int backed)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct gtt_range *gt;
- struct resource *r = dev_priv->gtt_mem;
- int ret;
- unsigned long start, end;
-
- if (backed) {
- /* The start of the GTT is the stolen pages */
- start = r->start;
- end = r->start + dev_priv->gtt.stolen_size - 1;
- } else {
- /* The rest we will use for GEM backed objects */
- start = r->start + dev_priv->gtt.stolen_size;
- end = r->end;
- }
-
- gt = kzalloc(sizeof(struct gtt_range), GFP_KERNEL);
- if (gt == NULL)
- return NULL;
- gt->resource.name = name;
- gt->stolen = backed;
- gt->in_gart = backed;
- gt->roll = 0;
- /* Ensure this is set for non GEM objects */
- gt->gem.dev = dev;
- ret = allocate_resource(dev_priv->gtt_mem, >->resource,
- len, start, end, PAGE_SIZE, NULL, NULL);
- if (ret == 0) {
- gt->offset = gt->resource.start - r->start;
- return gt;
- }
- kfree(gt);
- return NULL;
-}
-
-/**
- * psb_gtt_free_range - release GTT address space
- * @dev: our DRM device
- * @gt: a mapping created with psb_gtt_alloc_range
- *
- * Release a resource that was allocated with psb_gtt_alloc_range. If the
- * object has been pinned by mmap users we clean this up here currently.
- */
-void psb_gtt_free_range(struct drm_device *dev, struct gtt_range *gt)
-{
- /* Undo the mmap pin if we are destroying the object */
- if (gt->mmapping) {
- psb_gtt_unpin(gt);
- gt->mmapping = 0;
- }
- WARN_ON(gt->in_gart && !gt->stolen);
- release_resource(>->resource);
- kfree(gt);
-}
-
-void psb_gtt_alloc(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- init_rwsem(&dev_priv->gtt.sem);
-}
-
-void psb_gtt_takedown(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (dev_priv->gtt_map) {
- iounmap(dev_priv->gtt_map);
- dev_priv->gtt_map = NULL;
- }
- if (dev_priv->gtt_initialized) {
- pci_write_config_word(dev->pdev, PSB_GMCH_CTRL,
- dev_priv->gmch_ctrl);
- PSB_WVDC32(dev_priv->pge_ctl, PSB_PGETBL_CTL);
- (void) PSB_RVDC32(PSB_PGETBL_CTL);
- }
- if (dev_priv->vram_addr)
- iounmap(dev_priv->gtt_map);
-}
-
-int psb_gtt_init(struct drm_device *dev, int resume)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- unsigned gtt_pages;
- unsigned long stolen_size, vram_stolen_size;
- unsigned i, num_pages;
- unsigned pfn_base;
- uint32_t vram_pages;
- uint32_t dvmt_mode = 0;
- struct psb_gtt *pg;
-
- int ret = 0;
- uint32_t pte;
-
- mutex_init(&dev_priv->gtt_mutex);
-
- psb_gtt_alloc(dev);
- pg = &dev_priv->gtt;
-
- /* Enable the GTT */
- pci_read_config_word(dev->pdev, PSB_GMCH_CTRL, &dev_priv->gmch_ctrl);
- pci_write_config_word(dev->pdev, PSB_GMCH_CTRL,
- dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED);
-
- dev_priv->pge_ctl = PSB_RVDC32(PSB_PGETBL_CTL);
- PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL);
- (void) PSB_RVDC32(PSB_PGETBL_CTL);
-
- /* The root resource we allocate address space from */
- dev_priv->gtt_initialized = 1;
-
- pg->gtt_phys_start = dev_priv->pge_ctl & PAGE_MASK;
-
- /*
- * The video mmu has a hw bug when accessing 0x0D0000000.
- * Make gatt start at 0x0e000,0000. This doesn't actually
- * matter for us but may do if the video acceleration ever
- * gets opened up.
- */
- pg->mmu_gatt_start = 0xE0000000;
-
- pg->gtt_start = pci_resource_start(dev->pdev, PSB_GTT_RESOURCE);
- gtt_pages = pci_resource_len(dev->pdev, PSB_GTT_RESOURCE)
- >> PAGE_SHIFT;
- /* Some CDV firmware doesn't report this currently. In which case the
- system has 64 gtt pages */
- if (pg->gtt_start == 0 || gtt_pages == 0) {
- dev_err(dev->dev, "GTT PCI BAR not initialized.\n");
- gtt_pages = 64;
- pg->gtt_start = dev_priv->pge_ctl;
- }
-
- pg->gatt_start = pci_resource_start(dev->pdev, PSB_GATT_RESOURCE);
- pg->gatt_pages = pci_resource_len(dev->pdev, PSB_GATT_RESOURCE)
- >> PAGE_SHIFT;
- dev_priv->gtt_mem = &dev->pdev->resource[PSB_GATT_RESOURCE];
-
- if (pg->gatt_pages == 0 || pg->gatt_start == 0) {
- static struct resource fudge; /* Preferably peppermint */
- /* This can occur on CDV SDV systems. Fudge it in this case.
- We really don't care what imaginary space is being allocated
- at this point */
- dev_err(dev->dev, "GATT PCI BAR not initialized.\n");
- pg->gatt_start = 0x40000000;
- pg->gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT;
- /* This is a little confusing but in fact the GTT is providing
- a view from the GPU into memory and not vice versa. As such
- this is really allocating space that is not the same as the
- CPU address space on CDV */
- fudge.start = 0x40000000;
- fudge.end = 0x40000000 + 128 * 1024 * 1024 - 1;
- fudge.name = "fudge";
- fudge.flags = IORESOURCE_MEM;
- dev_priv->gtt_mem = &fudge;
- }
-
- pci_read_config_dword(dev->pdev, PSB_BSM, &dev_priv->stolen_base);
- vram_stolen_size = pg->gtt_phys_start - dev_priv->stolen_base
- - PAGE_SIZE;
-
- stolen_size = vram_stolen_size;
-
- printk(KERN_INFO "Stolen memory information\n");
- printk(KERN_INFO " base in RAM: 0x%x\n", dev_priv->stolen_base);
- printk(KERN_INFO " size: %luK, calculated by (GTT RAM base) - (Stolen base), seems wrong\n",
- vram_stolen_size/1024);
- dvmt_mode = (dev_priv->gmch_ctrl >> 4) & 0x7;
- printk(KERN_INFO " the correct size should be: %dM(dvmt mode=%d)\n",
- (dvmt_mode == 1) ? 1 : (2 << (dvmt_mode - 1)), dvmt_mode);
-
- if (resume && (gtt_pages != pg->gtt_pages) &&
- (stolen_size != pg->stolen_size)) {
- dev_err(dev->dev, "GTT resume error.\n");
- ret = -EINVAL;
- goto out_err;
- }
-
- pg->gtt_pages = gtt_pages;
- pg->stolen_size = stolen_size;
- dev_priv->vram_stolen_size = vram_stolen_size;
-
- /*
- * Map the GTT and the stolen memory area
- */
- dev_priv->gtt_map = ioremap_nocache(pg->gtt_phys_start,
- gtt_pages << PAGE_SHIFT);
- if (!dev_priv->gtt_map) {
- dev_err(dev->dev, "Failure to map gtt.\n");
- ret = -ENOMEM;
- goto out_err;
- }
-
- dev_priv->vram_addr = ioremap_wc(dev_priv->stolen_base, stolen_size);
- if (!dev_priv->vram_addr) {
- dev_err(dev->dev, "Failure to map stolen base.\n");
- ret = -ENOMEM;
- goto out_err;
- }
-
- /*
- * Insert vram stolen pages into the GTT
- */
-
- pfn_base = dev_priv->stolen_base >> PAGE_SHIFT;
- vram_pages = num_pages = vram_stolen_size >> PAGE_SHIFT;
- printk(KERN_INFO"Set up %d stolen pages starting at 0x%08x, GTT offset %dK\n",
- num_pages, pfn_base << PAGE_SHIFT, 0);
- for (i = 0; i < num_pages; ++i) {
- pte = psb_gtt_mask_pte(pfn_base + i, 0);
- iowrite32(pte, dev_priv->gtt_map + i);
- }
-
- /*
- * Init rest of GTT to the scratch page to avoid accidents or scribbles
- */
-
- pfn_base = page_to_pfn(dev_priv->scratch_page);
- pte = psb_gtt_mask_pte(pfn_base, 0);
- for (; i < gtt_pages; ++i)
- iowrite32(pte, dev_priv->gtt_map + i);
-
- (void) ioread32(dev_priv->gtt_map + i - 1);
- return 0;
-
-out_err:
- psb_gtt_takedown(dev);
- return ret;
-}
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2007-2008, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-#ifndef _PSB_GTT_H_
-#define _PSB_GTT_H_
-
-#include <drm/drmP.h>
-
-/* This wants cleaning up with respect to the psb_dev and un-needed stuff */
-struct psb_gtt {
- uint32_t gatt_start;
- uint32_t mmu_gatt_start;
- uint32_t gtt_start;
- uint32_t gtt_phys_start;
- unsigned gtt_pages;
- unsigned gatt_pages;
- unsigned long stolen_size;
- unsigned long vram_stolen_size;
- struct rw_semaphore sem;
-};
-
-/* Exported functions */
-extern int psb_gtt_init(struct drm_device *dev, int resume);
-extern void psb_gtt_takedown(struct drm_device *dev);
-
-/* Each gtt_range describes an allocation in the GTT area */
-struct gtt_range {
- struct resource resource; /* Resource for our allocation */
- u32 offset; /* GTT offset of our object */
- struct drm_gem_object gem; /* GEM high level stuff */
- int in_gart; /* Currently in the GART (ref ct) */
- bool stolen; /* Backed from stolen RAM */
- bool mmapping; /* Is mmappable */
- struct page **pages; /* Backing pages if present */
- int npage; /* Number of backing pages */
- int roll; /* Roll applied to the GTT entries */
-};
-
-extern struct gtt_range *psb_gtt_alloc_range(struct drm_device *dev, int len,
- const char *name, int backed);
-extern void psb_gtt_kref_put(struct gtt_range *gt);
-extern void psb_gtt_free_range(struct drm_device *dev, struct gtt_range *gt);
-extern int psb_gtt_pin(struct gtt_range *gt);
-extern void psb_gtt_unpin(struct gtt_range *gt);
-extern void psb_gtt_roll(struct drm_device *dev,
- struct gtt_range *gt, int roll);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2006 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- *
- */
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include "psb_drm.h"
-#include "psb_drv.h"
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "intel_bios.h"
-
-
-static void *find_section(struct bdb_header *bdb, int section_id)
-{
- u8 *base = (u8 *)bdb;
- int index = 0;
- u16 total, current_size;
- u8 current_id;
-
- /* skip to first section */
- index += bdb->header_size;
- total = bdb->bdb_size;
-
- /* walk the sections looking for section_id */
- while (index < total) {
- current_id = *(base + index);
- index++;
- current_size = *((u16 *)(base + index));
- index += 2;
- if (current_id == section_id)
- return base + index;
- index += current_size;
- }
-
- return NULL;
-}
-
-static void fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
- struct lvds_dvo_timing *dvo_timing)
-{
- panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
- dvo_timing->hactive_lo;
- panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
- ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
- panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
- dvo_timing->hsync_pulse_width;
- panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
- ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
-
- panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
- dvo_timing->vactive_lo;
- panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
- dvo_timing->vsync_off;
- panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
- dvo_timing->vsync_pulse_width;
- panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
- ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
- panel_fixed_mode->clock = dvo_timing->clock * 10;
- panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
-
- /* Some VBTs have bogus h/vtotal values */
- if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
- panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
- if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
- panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
-
- drm_mode_set_name(panel_fixed_mode);
-}
-
-static void parse_backlight_data(struct drm_psb_private *dev_priv,
- struct bdb_header *bdb)
-{
- struct bdb_lvds_backlight *vbt_lvds_bl = NULL;
- struct bdb_lvds_backlight *lvds_bl;
- u8 p_type = 0;
- void *bl_start = NULL;
- struct bdb_lvds_options *lvds_opts
- = find_section(bdb, BDB_LVDS_OPTIONS);
-
- dev_priv->lvds_bl = NULL;
-
- if (lvds_opts)
- p_type = lvds_opts->panel_type;
- else
- return;
-
- bl_start = find_section(bdb, BDB_LVDS_BACKLIGHT);
- vbt_lvds_bl = (struct bdb_lvds_backlight *)(bl_start + 1) + p_type;
-
- lvds_bl = kzalloc(sizeof(*vbt_lvds_bl), GFP_KERNEL);
- if (!lvds_bl) {
- dev_err(dev_priv->dev->dev, "out of memory for backlight data\n");
- return;
- }
- memcpy(lvds_bl, vbt_lvds_bl, sizeof(*vbt_lvds_bl));
- dev_priv->lvds_bl = lvds_bl;
-}
-
-/* Try to find integrated panel data */
-static void parse_lfp_panel_data(struct drm_psb_private *dev_priv,
- struct bdb_header *bdb)
-{
- struct bdb_lvds_options *lvds_options;
- struct bdb_lvds_lfp_data *lvds_lfp_data;
- struct bdb_lvds_lfp_data_entry *entry;
- struct lvds_dvo_timing *dvo_timing;
- struct drm_display_mode *panel_fixed_mode;
-
- /* Defaults if we can't find VBT info */
- dev_priv->lvds_dither = 0;
- dev_priv->lvds_vbt = 0;
-
- lvds_options = find_section(bdb, BDB_LVDS_OPTIONS);
- if (!lvds_options)
- return;
-
- dev_priv->lvds_dither = lvds_options->pixel_dither;
- if (lvds_options->panel_type == 0xff)
- return;
-
- lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
- if (!lvds_lfp_data)
- return;
-
-
- entry = &lvds_lfp_data->data[lvds_options->panel_type];
- dvo_timing = &entry->dvo_timing;
-
- panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode),
- GFP_KERNEL);
- if (panel_fixed_mode == NULL) {
- dev_err(dev_priv->dev->dev, "out of memory for fixed panel mode\n");
- return;
- }
-
- dev_priv->lvds_vbt = 1;
- fill_detail_timing_data(panel_fixed_mode, dvo_timing);
-
- if (panel_fixed_mode->htotal > 0 && panel_fixed_mode->vtotal > 0) {
- dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode;
- drm_mode_debug_printmodeline(panel_fixed_mode);
- } else {
- dev_dbg(dev_priv->dev->dev, "ignoring invalid LVDS VBT\n");
- dev_priv->lvds_vbt = 0;
- kfree(panel_fixed_mode);
- }
- return;
-}
-
-/* Try to find sdvo panel data */
-static void parse_sdvo_panel_data(struct drm_psb_private *dev_priv,
- struct bdb_header *bdb)
-{
- struct bdb_sdvo_lvds_options *sdvo_lvds_options;
- struct lvds_dvo_timing *dvo_timing;
- struct drm_display_mode *panel_fixed_mode;
-
- dev_priv->sdvo_lvds_vbt_mode = NULL;
-
- sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS);
- if (!sdvo_lvds_options)
- return;
-
- dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS);
- if (!dvo_timing)
- return;
-
- panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
-
- if (!panel_fixed_mode)
- return;
-
- fill_detail_timing_data(panel_fixed_mode,
- dvo_timing + sdvo_lvds_options->panel_type);
-
- dev_priv->sdvo_lvds_vbt_mode = panel_fixed_mode;
-
- return;
-}
-
-static void parse_general_features(struct drm_psb_private *dev_priv,
- struct bdb_header *bdb)
-{
- struct bdb_general_features *general;
-
- /* Set sensible defaults in case we can't find the general block */
- dev_priv->int_tv_support = 1;
- dev_priv->int_crt_support = 1;
-
- general = find_section(bdb, BDB_GENERAL_FEATURES);
- if (general) {
- dev_priv->int_tv_support = general->int_tv_support;
- dev_priv->int_crt_support = general->int_crt_support;
- dev_priv->lvds_use_ssc = general->enable_ssc;
-
- if (dev_priv->lvds_use_ssc) {
- dev_priv->lvds_ssc_freq
- = general->ssc_freq ? 100 : 96;
- }
- }
-}
-
-/**
- * psb_intel_init_bios - initialize VBIOS settings & find VBT
- * @dev: DRM device
- *
- * Loads the Video BIOS and checks that the VBT exists. Sets scratch registers
- * to appropriate values.
- *
- * VBT existence is a sanity check that is relied on by other i830_bios.c code.
- * Note that it would be better to use a BIOS call to get the VBT, as BIOSes may
- * feed an updated VBT back through that, compared to what we'll fetch using
- * this method of groping around in the BIOS data.
- *
- * Returns 0 on success, nonzero on failure.
- */
-bool psb_intel_init_bios(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct pci_dev *pdev = dev->pdev;
- struct vbt_header *vbt = NULL;
- struct bdb_header *bdb;
- u8 __iomem *bios;
- size_t size;
- int i;
-
- bios = pci_map_rom(pdev, &size);
- if (!bios)
- return -1;
-
- /* Scour memory looking for the VBT signature */
- for (i = 0; i + 4 < size; i++) {
- if (!memcmp(bios + i, "$VBT", 4)) {
- vbt = (struct vbt_header *)(bios + i);
- break;
- }
- }
-
- if (!vbt) {
- dev_err(dev->dev, "VBT signature missing\n");
- pci_unmap_rom(pdev, bios);
- return -1;
- }
-
- bdb = (struct bdb_header *)(bios + i + vbt->bdb_offset);
-
- /* Grab useful general definitions */
- parse_general_features(dev_priv, bdb);
- parse_lfp_panel_data(dev_priv, bdb);
- parse_sdvo_panel_data(dev_priv, bdb);
- parse_backlight_data(dev_priv, bdb);
-
- pci_unmap_rom(pdev, bios);
-
- return 0;
-}
-
-/**
- * Destroy and free VBT data
- */
-void psb_intel_destroy_bios(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct drm_display_mode *sdvo_lvds_vbt_mode =
- dev_priv->sdvo_lvds_vbt_mode;
- struct drm_display_mode *lfp_lvds_vbt_mode =
- dev_priv->lfp_lvds_vbt_mode;
- struct bdb_lvds_backlight *lvds_bl =
- dev_priv->lvds_bl;
-
- /*free sdvo panel mode*/
- if (sdvo_lvds_vbt_mode) {
- dev_priv->sdvo_lvds_vbt_mode = NULL;
- kfree(sdvo_lvds_vbt_mode);
- }
-
- if (lfp_lvds_vbt_mode) {
- dev_priv->lfp_lvds_vbt_mode = NULL;
- kfree(lfp_lvds_vbt_mode);
- }
-
- if (lvds_bl) {
- dev_priv->lvds_bl = NULL;
- kfree(lvds_bl);
- }
-}
+++ /dev/null
-/*
- * Copyright (c) 2006 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- *
- */
-
-#ifndef _I830_BIOS_H_
-#define _I830_BIOS_H_
-
-#include <drm/drmP.h>
-
-struct vbt_header {
- u8 signature[20]; /**< Always starts with 'VBT$' */
- u16 version; /**< decimal */
- u16 header_size; /**< in bytes */
- u16 vbt_size; /**< in bytes */
- u8 vbt_checksum;
- u8 reserved0;
- u32 bdb_offset; /**< from beginning of VBT */
- u32 aim_offset[4]; /**< from beginning of VBT */
-} __attribute__((packed));
-
-
-struct bdb_header {
- u8 signature[16]; /**< Always 'BIOS_DATA_BLOCK' */
- u16 version; /**< decimal */
- u16 header_size; /**< in bytes */
- u16 bdb_size; /**< in bytes */
-};
-
-/* strictly speaking, this is a "skip" block, but it has interesting info */
-struct vbios_data {
- u8 type; /* 0 == desktop, 1 == mobile */
- u8 relstage;
- u8 chipset;
- u8 lvds_present:1;
- u8 tv_present:1;
- u8 rsvd2:6; /* finish byte */
- u8 rsvd3[4];
- u8 signon[155];
- u8 copyright[61];
- u16 code_segment;
- u8 dos_boot_mode;
- u8 bandwidth_percent;
- u8 rsvd4; /* popup memory size */
- u8 resize_pci_bios;
- u8 rsvd5; /* is crt already on ddc2 */
-} __attribute__((packed));
-
-/*
- * There are several types of BIOS data blocks (BDBs), each block has
- * an ID and size in the first 3 bytes (ID in first, size in next 2).
- * Known types are listed below.
- */
-#define BDB_GENERAL_FEATURES 1
-#define BDB_GENERAL_DEFINITIONS 2
-#define BDB_OLD_TOGGLE_LIST 3
-#define BDB_MODE_SUPPORT_LIST 4
-#define BDB_GENERIC_MODE_TABLE 5
-#define BDB_EXT_MMIO_REGS 6
-#define BDB_SWF_IO 7
-#define BDB_SWF_MMIO 8
-#define BDB_DOT_CLOCK_TABLE 9
-#define BDB_MODE_REMOVAL_TABLE 10
-#define BDB_CHILD_DEVICE_TABLE 11
-#define BDB_DRIVER_FEATURES 12
-#define BDB_DRIVER_PERSISTENCE 13
-#define BDB_EXT_TABLE_PTRS 14
-#define BDB_DOT_CLOCK_OVERRIDE 15
-#define BDB_DISPLAY_SELECT 16
-/* 17 rsvd */
-#define BDB_DRIVER_ROTATION 18
-#define BDB_DISPLAY_REMOVE 19
-#define BDB_OEM_CUSTOM 20
-#define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */
-#define BDB_SDVO_LVDS_OPTIONS 22
-#define BDB_SDVO_PANEL_DTDS 23
-#define BDB_SDVO_LVDS_PNP_IDS 24
-#define BDB_SDVO_LVDS_POWER_SEQ 25
-#define BDB_TV_OPTIONS 26
-#define BDB_LVDS_OPTIONS 40
-#define BDB_LVDS_LFP_DATA_PTRS 41
-#define BDB_LVDS_LFP_DATA 42
-#define BDB_LVDS_BACKLIGHT 43
-#define BDB_LVDS_POWER 44
-#define BDB_SKIP 254 /* VBIOS private block, ignore */
-
-struct bdb_general_features {
- /* bits 1 */
- u8 panel_fitting:2;
- u8 flexaim:1;
- u8 msg_enable:1;
- u8 clear_screen:3;
- u8 color_flip:1;
-
- /* bits 2 */
- u8 download_ext_vbt:1;
- u8 enable_ssc:1;
- u8 ssc_freq:1;
- u8 enable_lfp_on_override:1;
- u8 disable_ssc_ddt:1;
- u8 rsvd8:3; /* finish byte */
-
- /* bits 3 */
- u8 disable_smooth_vision:1;
- u8 single_dvi:1;
- u8 rsvd9:6; /* finish byte */
-
- /* bits 4 */
- u8 legacy_monitor_detect;
-
- /* bits 5 */
- u8 int_crt_support:1;
- u8 int_tv_support:1;
- u8 rsvd11:6; /* finish byte */
-} __attribute__((packed));
-
-struct bdb_general_definitions {
- /* DDC GPIO */
- u8 crt_ddc_gmbus_pin;
-
- /* DPMS bits */
- u8 dpms_acpi:1;
- u8 skip_boot_crt_detect:1;
- u8 dpms_aim:1;
- u8 rsvd1:5; /* finish byte */
-
- /* boot device bits */
- u8 boot_display[2];
- u8 child_dev_size;
-
- /* device info */
- u8 tv_or_lvds_info[33];
- u8 dev1[33];
- u8 dev2[33];
- u8 dev3[33];
- u8 dev4[33];
- /* may be another device block here on some platforms */
-};
-
-struct bdb_lvds_options {
- u8 panel_type;
- u8 rsvd1;
- /* LVDS capabilities, stored in a dword */
- u8 pfit_mode:2;
- u8 pfit_text_mode_enhanced:1;
- u8 pfit_gfx_mode_enhanced:1;
- u8 pfit_ratio_auto:1;
- u8 pixel_dither:1;
- u8 lvds_edid:1;
- u8 rsvd2:1;
- u8 rsvd4;
-} __attribute__((packed));
-
-struct bdb_lvds_backlight {
- u8 type:2;
- u8 pol:1;
- u8 gpio:3;
- u8 gmbus:2;
- u16 freq;
- u8 minbrightness;
- u8 i2caddr;
- u8 brightnesscmd;
- /*FIXME: more...*/
-} __attribute__((packed));
-
-/* LFP pointer table contains entries to the struct below */
-struct bdb_lvds_lfp_data_ptr {
- u16 fp_timing_offset; /* offsets are from start of bdb */
- u8 fp_table_size;
- u16 dvo_timing_offset;
- u8 dvo_table_size;
- u16 panel_pnp_id_offset;
- u8 pnp_table_size;
-} __attribute__((packed));
-
-struct bdb_lvds_lfp_data_ptrs {
- u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */
- struct bdb_lvds_lfp_data_ptr ptr[16];
-} __attribute__((packed));
-
-/* LFP data has 3 blocks per entry */
-struct lvds_fp_timing {
- u16 x_res;
- u16 y_res;
- u32 lvds_reg;
- u32 lvds_reg_val;
- u32 pp_on_reg;
- u32 pp_on_reg_val;
- u32 pp_off_reg;
- u32 pp_off_reg_val;
- u32 pp_cycle_reg;
- u32 pp_cycle_reg_val;
- u32 pfit_reg;
- u32 pfit_reg_val;
- u16 terminator;
-} __attribute__((packed));
-
-struct lvds_dvo_timing {
- u16 clock; /**< In 10khz */
- u8 hactive_lo;
- u8 hblank_lo;
- u8 hblank_hi:4;
- u8 hactive_hi:4;
- u8 vactive_lo;
- u8 vblank_lo;
- u8 vblank_hi:4;
- u8 vactive_hi:4;
- u8 hsync_off_lo;
- u8 hsync_pulse_width;
- u8 vsync_pulse_width:4;
- u8 vsync_off:4;
- u8 rsvd0:6;
- u8 hsync_off_hi:2;
- u8 h_image;
- u8 v_image;
- u8 max_hv;
- u8 h_border;
- u8 v_border;
- u8 rsvd1:3;
- u8 digital:2;
- u8 vsync_positive:1;
- u8 hsync_positive:1;
- u8 rsvd2:1;
-} __attribute__((packed));
-
-struct lvds_pnp_id {
- u16 mfg_name;
- u16 product_code;
- u32 serial;
- u8 mfg_week;
- u8 mfg_year;
-} __attribute__((packed));
-
-struct bdb_lvds_lfp_data_entry {
- struct lvds_fp_timing fp_timing;
- struct lvds_dvo_timing dvo_timing;
- struct lvds_pnp_id pnp_id;
-} __attribute__((packed));
-
-struct bdb_lvds_lfp_data {
- struct bdb_lvds_lfp_data_entry data[16];
-} __attribute__((packed));
-
-struct aimdb_header {
- char signature[16];
- char oem_device[20];
- u16 aimdb_version;
- u16 aimdb_header_size;
- u16 aimdb_size;
-} __attribute__((packed));
-
-struct aimdb_block {
- u8 aimdb_id;
- u16 aimdb_size;
-} __attribute__((packed));
-
-struct vch_panel_data {
- u16 fp_timing_offset;
- u8 fp_timing_size;
- u16 dvo_timing_offset;
- u8 dvo_timing_size;
- u16 text_fitting_offset;
- u8 text_fitting_size;
- u16 graphics_fitting_offset;
- u8 graphics_fitting_size;
-} __attribute__((packed));
-
-struct vch_bdb_22 {
- struct aimdb_block aimdb_block;
- struct vch_panel_data panels[16];
-} __attribute__((packed));
-
-struct bdb_sdvo_lvds_options {
- u8 panel_backlight;
- u8 h40_set_panel_type;
- u8 panel_type;
- u8 ssc_clk_freq;
- u16 als_low_trip;
- u16 als_high_trip;
- u8 sclalarcoeff_tab_row_num;
- u8 sclalarcoeff_tab_row_size;
- u8 coefficient[8];
- u8 panel_misc_bits_1;
- u8 panel_misc_bits_2;
- u8 panel_misc_bits_3;
- u8 panel_misc_bits_4;
-} __attribute__((packed));
-
-
-extern bool psb_intel_init_bios(struct drm_device *dev);
-extern void psb_intel_destroy_bios(struct drm_device *dev);
-
-/*
- * Driver<->VBIOS interaction occurs through scratch bits in
- * GR18 & SWF*.
- */
-
-/* GR18 bits are set on display switch and hotkey events */
-#define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */
-#define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */
-#define GR18_HK_NONE (0x0<<3)
-#define GR18_HK_LFP_STRETCH (0x1<<3)
-#define GR18_HK_TOGGLE_DISP (0x2<<3)
-#define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */
-#define GR18_HK_POPUP_DISABLED (0x6<<3)
-#define GR18_HK_POPUP_ENABLED (0x7<<3)
-#define GR18_HK_PFIT (0x8<<3)
-#define GR18_HK_APM_CHANGE (0xa<<3)
-#define GR18_HK_MULTIPLE (0xc<<3)
-#define GR18_USER_INT_EN (1<<2)
-#define GR18_A0000_FLUSH_EN (1<<1)
-#define GR18_SMM_EN (1<<0)
-
-/* Set by driver, cleared by VBIOS */
-#define SWF00_YRES_SHIFT 16
-#define SWF00_XRES_SHIFT 0
-#define SWF00_RES_MASK 0xffff
-
-/* Set by VBIOS at boot time and driver at runtime */
-#define SWF01_TV2_FORMAT_SHIFT 8
-#define SWF01_TV1_FORMAT_SHIFT 0
-#define SWF01_TV_FORMAT_MASK 0xffff
-
-#define SWF10_VBIOS_BLC_I2C_EN (1<<29)
-#define SWF10_GTT_OVERRIDE_EN (1<<28)
-#define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */
-#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
-#define SWF10_OLD_TOGGLE 0x0
-#define SWF10_TOGGLE_LIST_1 0x1
-#define SWF10_TOGGLE_LIST_2 0x2
-#define SWF10_TOGGLE_LIST_3 0x3
-#define SWF10_TOGGLE_LIST_4 0x4
-#define SWF10_PANNING_EN (1<<23)
-#define SWF10_DRIVER_LOADED (1<<22)
-#define SWF10_EXTENDED_DESKTOP (1<<21)
-#define SWF10_EXCLUSIVE_MODE (1<<20)
-#define SWF10_OVERLAY_EN (1<<19)
-#define SWF10_PLANEB_HOLDOFF (1<<18)
-#define SWF10_PLANEA_HOLDOFF (1<<17)
-#define SWF10_VGA_HOLDOFF (1<<16)
-#define SWF10_ACTIVE_DISP_MASK 0xffff
-#define SWF10_PIPEB_LFP2 (1<<15)
-#define SWF10_PIPEB_EFP2 (1<<14)
-#define SWF10_PIPEB_TV2 (1<<13)
-#define SWF10_PIPEB_CRT2 (1<<12)
-#define SWF10_PIPEB_LFP (1<<11)
-#define SWF10_PIPEB_EFP (1<<10)
-#define SWF10_PIPEB_TV (1<<9)
-#define SWF10_PIPEB_CRT (1<<8)
-#define SWF10_PIPEA_LFP2 (1<<7)
-#define SWF10_PIPEA_EFP2 (1<<6)
-#define SWF10_PIPEA_TV2 (1<<5)
-#define SWF10_PIPEA_CRT2 (1<<4)
-#define SWF10_PIPEA_LFP (1<<3)
-#define SWF10_PIPEA_EFP (1<<2)
-#define SWF10_PIPEA_TV (1<<1)
-#define SWF10_PIPEA_CRT (1<<0)
-
-#define SWF11_MEMORY_SIZE_SHIFT 16
-#define SWF11_SV_TEST_EN (1<<15)
-#define SWF11_IS_AGP (1<<14)
-#define SWF11_DISPLAY_HOLDOFF (1<<13)
-#define SWF11_DPMS_REDUCED (1<<12)
-#define SWF11_IS_VBE_MODE (1<<11)
-#define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */
-#define SWF11_DPMS_MASK 0x07
-#define SWF11_DPMS_OFF (1<<2)
-#define SWF11_DPMS_SUSPEND (1<<1)
-#define SWF11_DPMS_STANDBY (1<<0)
-#define SWF11_DPMS_ON 0
-
-#define SWF14_GFX_PFIT_EN (1<<31)
-#define SWF14_TEXT_PFIT_EN (1<<30)
-#define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */
-#define SWF14_POPUP_EN (1<<28)
-#define SWF14_DISPLAY_HOLDOFF (1<<27)
-#define SWF14_DISP_DETECT_EN (1<<26)
-#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
-#define SWF14_DRIVER_STATUS (1<<24)
-#define SWF14_OS_TYPE_WIN9X (1<<23)
-#define SWF14_OS_TYPE_WINNT (1<<22)
-/* 21:19 rsvd */
-#define SWF14_PM_TYPE_MASK 0x00070000
-#define SWF14_PM_ACPI_VIDEO (0x4 << 16)
-#define SWF14_PM_ACPI (0x3 << 16)
-#define SWF14_PM_APM_12 (0x2 << 16)
-#define SWF14_PM_APM_11 (0x1 << 16)
-#define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */
- /* if GR18 indicates a display switch */
-#define SWF14_DS_PIPEB_LFP2_EN (1<<15)
-#define SWF14_DS_PIPEB_EFP2_EN (1<<14)
-#define SWF14_DS_PIPEB_TV2_EN (1<<13)
-#define SWF14_DS_PIPEB_CRT2_EN (1<<12)
-#define SWF14_DS_PIPEB_LFP_EN (1<<11)
-#define SWF14_DS_PIPEB_EFP_EN (1<<10)
-#define SWF14_DS_PIPEB_TV_EN (1<<9)
-#define SWF14_DS_PIPEB_CRT_EN (1<<8)
-#define SWF14_DS_PIPEA_LFP2_EN (1<<7)
-#define SWF14_DS_PIPEA_EFP2_EN (1<<6)
-#define SWF14_DS_PIPEA_TV2_EN (1<<5)
-#define SWF14_DS_PIPEA_CRT2_EN (1<<4)
-#define SWF14_DS_PIPEA_LFP_EN (1<<3)
-#define SWF14_DS_PIPEA_EFP_EN (1<<2)
-#define SWF14_DS_PIPEA_TV_EN (1<<1)
-#define SWF14_DS_PIPEA_CRT_EN (1<<0)
- /* if GR18 indicates a panel fitting request */
-#define SWF14_PFIT_EN (1<<0) /* 0 means disable */
- /* if GR18 indicates an APM change request */
-#define SWF14_APM_HIBERNATE 0x4
-#define SWF14_APM_SUSPEND 0x3
-#define SWF14_APM_STANDBY 0x1
-#define SWF14_APM_RESTORE 0x0
-
-#endif /* _I830_BIOS_H_ */
+++ /dev/null
-/*
- * Copyright © 2006-2007 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/export.h>
-
-#include "psb_drv.h"
-#include "psb_intel_reg.h"
-
-/*
- * Intel GPIO access functions
- */
-
-#define I2C_RISEFALL_TIME 20
-
-static int get_clock(void *data)
-{
- struct psb_intel_i2c_chan *chan = data;
- struct drm_device *dev = chan->drm_dev;
- u32 val;
-
- val = REG_READ(chan->reg);
- return (val & GPIO_CLOCK_VAL_IN) != 0;
-}
-
-static int get_data(void *data)
-{
- struct psb_intel_i2c_chan *chan = data;
- struct drm_device *dev = chan->drm_dev;
- u32 val;
-
- val = REG_READ(chan->reg);
- return (val & GPIO_DATA_VAL_IN) != 0;
-}
-
-static void set_clock(void *data, int state_high)
-{
- struct psb_intel_i2c_chan *chan = data;
- struct drm_device *dev = chan->drm_dev;
- u32 reserved = 0, clock_bits;
-
- /* On most chips, these bits must be preserved in software. */
- reserved =
- REG_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE |
- GPIO_CLOCK_PULLUP_DISABLE);
-
- if (state_high)
- clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;
- else
- clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |
- GPIO_CLOCK_VAL_MASK;
- REG_WRITE(chan->reg, reserved | clock_bits);
- udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */
-}
-
-static void set_data(void *data, int state_high)
-{
- struct psb_intel_i2c_chan *chan = data;
- struct drm_device *dev = chan->drm_dev;
- u32 reserved = 0, data_bits;
-
- /* On most chips, these bits must be preserved in software. */
- reserved =
- REG_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE |
- GPIO_CLOCK_PULLUP_DISABLE);
-
- if (state_high)
- data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
- else
- data_bits =
- GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |
- GPIO_DATA_VAL_MASK;
-
- REG_WRITE(chan->reg, reserved | data_bits);
- udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */
-}
-
-/**
- * psb_intel_i2c_create - instantiate an Intel i2c bus using the specified GPIO reg
- * @dev: DRM device
- * @output: driver specific output device
- * @reg: GPIO reg to use
- * @name: name for this bus
- *
- * Creates and registers a new i2c bus with the Linux i2c layer, for use
- * in output probing and control (e.g. DDC or SDVO control functions).
- *
- * Possible values for @reg include:
- * %GPIOA
- * %GPIOB
- * %GPIOC
- * %GPIOD
- * %GPIOE
- * %GPIOF
- * %GPIOG
- * %GPIOH
- * see PRM for details on how these different busses are used.
- */
-struct psb_intel_i2c_chan *psb_intel_i2c_create(struct drm_device *dev,
- const u32 reg, const char *name)
-{
- struct psb_intel_i2c_chan *chan;
-
- chan = kzalloc(sizeof(struct psb_intel_i2c_chan), GFP_KERNEL);
- if (!chan)
- goto out_free;
-
- chan->drm_dev = dev;
- chan->reg = reg;
- snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name);
- chan->adapter.owner = THIS_MODULE;
- chan->adapter.algo_data = &chan->algo;
- chan->adapter.dev.parent = &dev->pdev->dev;
- chan->algo.setsda = set_data;
- chan->algo.setscl = set_clock;
- chan->algo.getsda = get_data;
- chan->algo.getscl = get_clock;
- chan->algo.udelay = 20;
- chan->algo.timeout = usecs_to_jiffies(2200);
- chan->algo.data = chan;
-
- i2c_set_adapdata(&chan->adapter, chan);
-
- if (i2c_bit_add_bus(&chan->adapter))
- goto out_free;
-
- /* JJJ: raise SCL and SDA? */
- set_data(chan, 1);
- set_clock(chan, 1);
- udelay(20);
-
- return chan;
-
-out_free:
- kfree(chan);
- return NULL;
-}
-
-/**
- * psb_intel_i2c_destroy - unregister and free i2c bus resources
- * @output: channel to free
- *
- * Unregister the adapter from the i2c layer, then free the structure.
- */
-void psb_intel_i2c_destroy(struct psb_intel_i2c_chan *chan)
-{
- if (!chan)
- return;
-
- i2c_del_adapter(&chan->adapter);
- kfree(chan);
-}
+++ /dev/null
-/*
- * Copyright 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * FIXME: resolve with the i915 version
- */
-
-#include "psb_drv.h"
-
-struct opregion_header {
- u8 signature[16];
- u32 size;
- u32 opregion_ver;
- u8 bios_ver[32];
- u8 vbios_ver[16];
- u8 driver_ver[16];
- u32 mboxes;
- u8 reserved[164];
-} __packed;
-
-struct opregion_apci {
- /*FIXME: add it later*/
-} __packed;
-
-struct opregion_swsci {
- /*FIXME: add it later*/
-} __packed;
-
-struct opregion_acpi {
- /*FIXME: add it later*/
-} __packed;
-
-int gma_intel_opregion_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 opregion_phy;
- void *base;
- u32 *lid_state;
-
- dev_priv->lid_state = NULL;
-
- pci_read_config_dword(dev->pdev, 0xfc, &opregion_phy);
- if (opregion_phy == 0)
- return -ENOTSUPP;
-
- base = ioremap(opregion_phy, 8*1024);
- if (!base)
- return -ENOMEM;
-
- lid_state = base + 0x01ac;
-
- dev_priv->lid_state = lid_state;
- dev_priv->lid_last_state = readl(lid_state);
- return 0;
-}
-
-int gma_intel_opregion_exit(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- if (dev_priv->lid_state)
- iounmap(dev_priv->lid_state);
- return 0;
-}
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-#include <linux/backlight.h>
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include "psb_reg.h"
-#include "psb_intel_reg.h"
-#include "psb_drm.h"
-#include "psb_drv.h"
-#include "mdfld_output.h"
-#include "mdfld_dsi_output.h"
-#include "mid_bios.h"
-
-/*
- * Provide the Medfield specific backlight management
- */
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-
-static int mdfld_brightness;
-struct backlight_device *mdfld_backlight_device;
-
-static int mfld_set_brightness(struct backlight_device *bd)
-{
- struct drm_device *dev = bl_get_data(mdfld_backlight_device);
- struct drm_psb_private *dev_priv = dev->dev_private;
- int level = bd->props.brightness;
-
- /* Percentage 1-100% being valid */
- if (level < 1)
- level = 1;
-
- if (gma_power_begin(dev, 0)) {
- /* Calculate and set the brightness value */
- u32 adjusted_level;
-
- /* Adjust the backlight level with the percent in
- * dev_priv->blc_adj2;
- */
- adjusted_level = level * dev_priv->blc_adj2;
- adjusted_level = adjusted_level / 100;
-#if 0
-#ifndef CONFIG_MDFLD_DSI_DPU
- if(!(dev_priv->dsr_fb_update & MDFLD_DSR_MIPI_CONTROL) &&
- (dev_priv->dbi_panel_on || dev_priv->dbi_panel_on2)){
- mdfld_dsi_dbi_exit_dsr(dev,MDFLD_DSR_MIPI_CONTROL, 0, 0);
- dev_dbg(dev->dev, "Out of DSR before set brightness to %d.\n",adjusted_level);
- }
-#endif
- mdfld_dsi_brightness_control(dev, 0, adjusted_level);
-
- if ((dev_priv->dbi_panel_on2) || (dev_priv->dpi_panel_on2))
- mdfld_dsi_brightness_control(dev, 2, adjusted_level);
-#endif
- gma_power_end(dev);
- }
- mdfld_brightness = level;
- return 0;
-}
-
-int psb_get_brightness(struct backlight_device *bd)
-{
- /* return locally cached var instead of HW read (due to DPST etc.) */
- /* FIXME: ideally return actual value in case firmware fiddled with
- it */
- return mdfld_brightness;
-}
-
-static const struct backlight_ops mfld_ops = {
- .get_brightness = psb_get_brightness,
- .update_status = mfld_set_brightness,
-};
-
-static int mdfld_backlight_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct backlight_properties props;
- memset(&props, 0, sizeof(struct backlight_properties));
- props.max_brightness = 100;
- props.type = BACKLIGHT_PLATFORM;
-
- mdfld_backlight_device = backlight_device_register("mfld-bl",
- NULL, (void *)dev, &mfld_ops, &props);
-
- if (IS_ERR(mdfld_backlight_device))
- return PTR_ERR(mdfld_backlight_device);
-
- dev_priv->blc_adj1 = 100;
- dev_priv->blc_adj2 = 100;
- mdfld_backlight_device->props.brightness = 100;
- mdfld_backlight_device->props.max_brightness = 100;
- backlight_update_status(mdfld_backlight_device);
- dev_priv->backlight_device = mdfld_backlight_device;
- return 0;
-}
-
-#endif
-
-/*
- * Provide the Medfield specific chip logic and low level methods for
- * power management.
- */
-
-static void mdfld_init_pm(struct drm_device *dev)
-{
- /* No work needed here yet */
-}
-
-/**
- * mdfld_save_display_registers - save registers for pipe
- * @dev: our device
- * @pipe: pipe to save
- *
- * Save the pipe state of the device before we power it off. Keep everything
- * we need to put it back again
- */
-static int mdfld_save_display_registers(struct drm_device *dev, int pipe)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- int i;
-
- /* register */
- u32 dpll_reg = MRST_DPLL_A;
- u32 fp_reg = MRST_FPA0;
- u32 pipeconf_reg = PIPEACONF;
- u32 htot_reg = HTOTAL_A;
- u32 hblank_reg = HBLANK_A;
- u32 hsync_reg = HSYNC_A;
- u32 vtot_reg = VTOTAL_A;
- u32 vblank_reg = VBLANK_A;
- u32 vsync_reg = VSYNC_A;
- u32 pipesrc_reg = PIPEASRC;
- u32 dspstride_reg = DSPASTRIDE;
- u32 dsplinoff_reg = DSPALINOFF;
- u32 dsptileoff_reg = DSPATILEOFF;
- u32 dspsize_reg = DSPASIZE;
- u32 dsppos_reg = DSPAPOS;
- u32 dspsurf_reg = DSPASURF;
- u32 mipi_reg = MIPI;
- u32 dspcntr_reg = DSPACNTR;
- u32 dspstatus_reg = PIPEASTAT;
- u32 palette_reg = PALETTE_A;
-
- /* pointer to values */
- u32 *dpll_val = &dev_priv->saveDPLL_A;
- u32 *fp_val = &dev_priv->saveFPA0;
- u32 *pipeconf_val = &dev_priv->savePIPEACONF;
- u32 *htot_val = &dev_priv->saveHTOTAL_A;
- u32 *hblank_val = &dev_priv->saveHBLANK_A;
- u32 *hsync_val = &dev_priv->saveHSYNC_A;
- u32 *vtot_val = &dev_priv->saveVTOTAL_A;
- u32 *vblank_val = &dev_priv->saveVBLANK_A;
- u32 *vsync_val = &dev_priv->saveVSYNC_A;
- u32 *pipesrc_val = &dev_priv->savePIPEASRC;
- u32 *dspstride_val = &dev_priv->saveDSPASTRIDE;
- u32 *dsplinoff_val = &dev_priv->saveDSPALINOFF;
- u32 *dsptileoff_val = &dev_priv->saveDSPATILEOFF;
- u32 *dspsize_val = &dev_priv->saveDSPASIZE;
- u32 *dsppos_val = &dev_priv->saveDSPAPOS;
- u32 *dspsurf_val = &dev_priv->saveDSPASURF;
- u32 *mipi_val = &dev_priv->saveMIPI;
- u32 *dspcntr_val = &dev_priv->saveDSPACNTR;
- u32 *dspstatus_val = &dev_priv->saveDSPASTATUS;
- u32 *palette_val = dev_priv->save_palette_a;
-
- switch (pipe) {
- case 0:
- break;
- case 1:
- /* register */
- dpll_reg = MDFLD_DPLL_B;
- fp_reg = MDFLD_DPLL_DIV0;
- pipeconf_reg = PIPEBCONF;
- htot_reg = HTOTAL_B;
- hblank_reg = HBLANK_B;
- hsync_reg = HSYNC_B;
- vtot_reg = VTOTAL_B;
- vblank_reg = VBLANK_B;
- vsync_reg = VSYNC_B;
- pipesrc_reg = PIPEBSRC;
- dspstride_reg = DSPBSTRIDE;
- dsplinoff_reg = DSPBLINOFF;
- dsptileoff_reg = DSPBTILEOFF;
- dspsize_reg = DSPBSIZE;
- dsppos_reg = DSPBPOS;
- dspsurf_reg = DSPBSURF;
- dspcntr_reg = DSPBCNTR;
- dspstatus_reg = PIPEBSTAT;
- palette_reg = PALETTE_B;
-
- /* values */
- dpll_val = &dev_priv->saveDPLL_B;
- fp_val = &dev_priv->saveFPB0;
- pipeconf_val = &dev_priv->savePIPEBCONF;
- htot_val = &dev_priv->saveHTOTAL_B;
- hblank_val = &dev_priv->saveHBLANK_B;
- hsync_val = &dev_priv->saveHSYNC_B;
- vtot_val = &dev_priv->saveVTOTAL_B;
- vblank_val = &dev_priv->saveVBLANK_B;
- vsync_val = &dev_priv->saveVSYNC_B;
- pipesrc_val = &dev_priv->savePIPEBSRC;
- dspstride_val = &dev_priv->saveDSPBSTRIDE;
- dsplinoff_val = &dev_priv->saveDSPBLINOFF;
- dsptileoff_val = &dev_priv->saveDSPBTILEOFF;
- dspsize_val = &dev_priv->saveDSPBSIZE;
- dsppos_val = &dev_priv->saveDSPBPOS;
- dspsurf_val = &dev_priv->saveDSPBSURF;
- dspcntr_val = &dev_priv->saveDSPBCNTR;
- dspstatus_val = &dev_priv->saveDSPBSTATUS;
- palette_val = dev_priv->save_palette_b;
- break;
- case 2:
- /* register */
- pipeconf_reg = PIPECCONF;
- htot_reg = HTOTAL_C;
- hblank_reg = HBLANK_C;
- hsync_reg = HSYNC_C;
- vtot_reg = VTOTAL_C;
- vblank_reg = VBLANK_C;
- vsync_reg = VSYNC_C;
- pipesrc_reg = PIPECSRC;
- dspstride_reg = DSPCSTRIDE;
- dsplinoff_reg = DSPCLINOFF;
- dsptileoff_reg = DSPCTILEOFF;
- dspsize_reg = DSPCSIZE;
- dsppos_reg = DSPCPOS;
- dspsurf_reg = DSPCSURF;
- mipi_reg = MIPI_C;
- dspcntr_reg = DSPCCNTR;
- dspstatus_reg = PIPECSTAT;
- palette_reg = PALETTE_C;
-
- /* pointer to values */
- pipeconf_val = &dev_priv->savePIPECCONF;
- htot_val = &dev_priv->saveHTOTAL_C;
- hblank_val = &dev_priv->saveHBLANK_C;
- hsync_val = &dev_priv->saveHSYNC_C;
- vtot_val = &dev_priv->saveVTOTAL_C;
- vblank_val = &dev_priv->saveVBLANK_C;
- vsync_val = &dev_priv->saveVSYNC_C;
- pipesrc_val = &dev_priv->savePIPECSRC;
- dspstride_val = &dev_priv->saveDSPCSTRIDE;
- dsplinoff_val = &dev_priv->saveDSPCLINOFF;
- dsptileoff_val = &dev_priv->saveDSPCTILEOFF;
- dspsize_val = &dev_priv->saveDSPCSIZE;
- dsppos_val = &dev_priv->saveDSPCPOS;
- dspsurf_val = &dev_priv->saveDSPCSURF;
- mipi_val = &dev_priv->saveMIPI_C;
- dspcntr_val = &dev_priv->saveDSPCCNTR;
- dspstatus_val = &dev_priv->saveDSPCSTATUS;
- palette_val = dev_priv->save_palette_c;
- break;
- default:
- DRM_ERROR("%s, invalid pipe number.\n", __func__);
- return -EINVAL;
- }
-
- /* Pipe & plane A info */
- *dpll_val = PSB_RVDC32(dpll_reg);
- *fp_val = PSB_RVDC32(fp_reg);
- *pipeconf_val = PSB_RVDC32(pipeconf_reg);
- *htot_val = PSB_RVDC32(htot_reg);
- *hblank_val = PSB_RVDC32(hblank_reg);
- *hsync_val = PSB_RVDC32(hsync_reg);
- *vtot_val = PSB_RVDC32(vtot_reg);
- *vblank_val = PSB_RVDC32(vblank_reg);
- *vsync_val = PSB_RVDC32(vsync_reg);
- *pipesrc_val = PSB_RVDC32(pipesrc_reg);
- *dspstride_val = PSB_RVDC32(dspstride_reg);
- *dsplinoff_val = PSB_RVDC32(dsplinoff_reg);
- *dsptileoff_val = PSB_RVDC32(dsptileoff_reg);
- *dspsize_val = PSB_RVDC32(dspsize_reg);
- *dsppos_val = PSB_RVDC32(dsppos_reg);
- *dspsurf_val = PSB_RVDC32(dspsurf_reg);
- *dspcntr_val = PSB_RVDC32(dspcntr_reg);
- *dspstatus_val = PSB_RVDC32(dspstatus_reg);
-
- /*save palette (gamma) */
- for (i = 0; i < 256; i++)
- palette_val[i] = PSB_RVDC32(palette_reg + (i<<2));
-
- if (pipe == 1) {
- dev_priv->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
- dev_priv->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
- dev_priv->saveHDMIPHYMISCCTL = PSB_RVDC32(HDMIPHYMISCCTL);
- dev_priv->saveHDMIB_CONTROL = PSB_RVDC32(HDMIB_CONTROL);
- return 0;
- }
- *mipi_val = PSB_RVDC32(mipi_reg);
- return 0;
-}
-
-/**
- * mdfld_save_cursor_overlay_registers - save cursor overlay info
- * @dev: our device
- *
- * Save the cursor and overlay register state
- */
-static int mdfld_save_cursor_overlay_registers(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- /* Save cursor regs */
- dev_priv->saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR);
- dev_priv->saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE);
- dev_priv->saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS);
-
- dev_priv->saveDSPBCURSOR_CTRL = PSB_RVDC32(CURBCNTR);
- dev_priv->saveDSPBCURSOR_BASE = PSB_RVDC32(CURBBASE);
- dev_priv->saveDSPBCURSOR_POS = PSB_RVDC32(CURBPOS);
-
- dev_priv->saveDSPCCURSOR_CTRL = PSB_RVDC32(CURCCNTR);
- dev_priv->saveDSPCCURSOR_BASE = PSB_RVDC32(CURCBASE);
- dev_priv->saveDSPCCURSOR_POS = PSB_RVDC32(CURCPOS);
-
- /* HW overlay */
- dev_priv->saveOV_OVADD = PSB_RVDC32(OV_OVADD);
- dev_priv->saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0);
- dev_priv->saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1);
- dev_priv->saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2);
- dev_priv->saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3);
- dev_priv->saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4);
- dev_priv->saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5);
-
- dev_priv->saveOV_OVADD_C = PSB_RVDC32(OV_OVADD + OV_C_OFFSET);
- dev_priv->saveOV_OGAMC0_C = PSB_RVDC32(OV_OGAMC0 + OV_C_OFFSET);
- dev_priv->saveOV_OGAMC1_C = PSB_RVDC32(OV_OGAMC1 + OV_C_OFFSET);
- dev_priv->saveOV_OGAMC2_C = PSB_RVDC32(OV_OGAMC2 + OV_C_OFFSET);
- dev_priv->saveOV_OGAMC3_C = PSB_RVDC32(OV_OGAMC3 + OV_C_OFFSET);
- dev_priv->saveOV_OGAMC4_C = PSB_RVDC32(OV_OGAMC4 + OV_C_OFFSET);
- dev_priv->saveOV_OGAMC5_C = PSB_RVDC32(OV_OGAMC5 + OV_C_OFFSET);
-
- return 0;
-}
-/*
- * mdfld_restore_display_registers - restore the state of a pipe
- * @dev: our device
- * @pipe: the pipe to restore
- *
- * Restore the state of a pipe to that which was saved by the register save
- * functions.
- */
-static int mdfld_restore_display_registers(struct drm_device *dev, int pipe)
-{
- /* To get panel out of ULPS mode */
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dsi_config *dsi_config = NULL;
- u32 i = 0;
- u32 dpll = 0;
- u32 timeout = 0;
- u32 reg_offset = 0;
-
- /* register */
- u32 dpll_reg = MRST_DPLL_A;
- u32 fp_reg = MRST_FPA0;
- u32 pipeconf_reg = PIPEACONF;
- u32 htot_reg = HTOTAL_A;
- u32 hblank_reg = HBLANK_A;
- u32 hsync_reg = HSYNC_A;
- u32 vtot_reg = VTOTAL_A;
- u32 vblank_reg = VBLANK_A;
- u32 vsync_reg = VSYNC_A;
- u32 pipesrc_reg = PIPEASRC;
- u32 dspstride_reg = DSPASTRIDE;
- u32 dsplinoff_reg = DSPALINOFF;
- u32 dsptileoff_reg = DSPATILEOFF;
- u32 dspsize_reg = DSPASIZE;
- u32 dsppos_reg = DSPAPOS;
- u32 dspsurf_reg = DSPASURF;
- u32 dspstatus_reg = PIPEASTAT;
- u32 mipi_reg = MIPI;
- u32 dspcntr_reg = DSPACNTR;
- u32 palette_reg = PALETTE_A;
-
- /* values */
- u32 dpll_val = dev_priv->saveDPLL_A & ~DPLL_VCO_ENABLE;
- u32 fp_val = dev_priv->saveFPA0;
- u32 pipeconf_val = dev_priv->savePIPEACONF;
- u32 htot_val = dev_priv->saveHTOTAL_A;
- u32 hblank_val = dev_priv->saveHBLANK_A;
- u32 hsync_val = dev_priv->saveHSYNC_A;
- u32 vtot_val = dev_priv->saveVTOTAL_A;
- u32 vblank_val = dev_priv->saveVBLANK_A;
- u32 vsync_val = dev_priv->saveVSYNC_A;
- u32 pipesrc_val = dev_priv->savePIPEASRC;
- u32 dspstride_val = dev_priv->saveDSPASTRIDE;
- u32 dsplinoff_val = dev_priv->saveDSPALINOFF;
- u32 dsptileoff_val = dev_priv->saveDSPATILEOFF;
- u32 dspsize_val = dev_priv->saveDSPASIZE;
- u32 dsppos_val = dev_priv->saveDSPAPOS;
- u32 dspsurf_val = dev_priv->saveDSPASURF;
- u32 dspstatus_val = dev_priv->saveDSPASTATUS;
- u32 mipi_val = dev_priv->saveMIPI;
- u32 dspcntr_val = dev_priv->saveDSPACNTR;
- u32 *palette_val = dev_priv->save_palette_a;
-
- switch (pipe) {
- case 0:
- dsi_config = dev_priv->dsi_configs[0];
- break;
- case 1:
- /* register */
- dpll_reg = MDFLD_DPLL_B;
- fp_reg = MDFLD_DPLL_DIV0;
- pipeconf_reg = PIPEBCONF;
- htot_reg = HTOTAL_B;
- hblank_reg = HBLANK_B;
- hsync_reg = HSYNC_B;
- vtot_reg = VTOTAL_B;
- vblank_reg = VBLANK_B;
- vsync_reg = VSYNC_B;
- pipesrc_reg = PIPEBSRC;
- dspstride_reg = DSPBSTRIDE;
- dsplinoff_reg = DSPBLINOFF;
- dsptileoff_reg = DSPBTILEOFF;
- dspsize_reg = DSPBSIZE;
- dsppos_reg = DSPBPOS;
- dspsurf_reg = DSPBSURF;
- dspcntr_reg = DSPBCNTR;
- palette_reg = PALETTE_B;
- dspstatus_reg = PIPEBSTAT;
-
- /* values */
- dpll_val = dev_priv->saveDPLL_B & ~DPLL_VCO_ENABLE;
- fp_val = dev_priv->saveFPB0;
- pipeconf_val = dev_priv->savePIPEBCONF;
- htot_val = dev_priv->saveHTOTAL_B;
- hblank_val = dev_priv->saveHBLANK_B;
- hsync_val = dev_priv->saveHSYNC_B;
- vtot_val = dev_priv->saveVTOTAL_B;
- vblank_val = dev_priv->saveVBLANK_B;
- vsync_val = dev_priv->saveVSYNC_B;
- pipesrc_val = dev_priv->savePIPEBSRC;
- dspstride_val = dev_priv->saveDSPBSTRIDE;
- dsplinoff_val = dev_priv->saveDSPBLINOFF;
- dsptileoff_val = dev_priv->saveDSPBTILEOFF;
- dspsize_val = dev_priv->saveDSPBSIZE;
- dsppos_val = dev_priv->saveDSPBPOS;
- dspsurf_val = dev_priv->saveDSPBSURF;
- dspcntr_val = dev_priv->saveDSPBCNTR;
- dspstatus_val = dev_priv->saveDSPBSTATUS;
- palette_val = dev_priv->save_palette_b;
- break;
- case 2:
- reg_offset = MIPIC_REG_OFFSET;
-
- /* register */
- pipeconf_reg = PIPECCONF;
- htot_reg = HTOTAL_C;
- hblank_reg = HBLANK_C;
- hsync_reg = HSYNC_C;
- vtot_reg = VTOTAL_C;
- vblank_reg = VBLANK_C;
- vsync_reg = VSYNC_C;
- pipesrc_reg = PIPECSRC;
- dspstride_reg = DSPCSTRIDE;
- dsplinoff_reg = DSPCLINOFF;
- dsptileoff_reg = DSPCTILEOFF;
- dspsize_reg = DSPCSIZE;
- dsppos_reg = DSPCPOS;
- dspsurf_reg = DSPCSURF;
- mipi_reg = MIPI_C;
- dspcntr_reg = DSPCCNTR;
- palette_reg = PALETTE_C;
- dspstatus_reg = PIPECSTAT;
-
- /* values */
- pipeconf_val = dev_priv->savePIPECCONF;
- htot_val = dev_priv->saveHTOTAL_C;
- hblank_val = dev_priv->saveHBLANK_C;
- hsync_val = dev_priv->saveHSYNC_C;
- vtot_val = dev_priv->saveVTOTAL_C;
- vblank_val = dev_priv->saveVBLANK_C;
- vsync_val = dev_priv->saveVSYNC_C;
- pipesrc_val = dev_priv->savePIPECSRC;
- dspstride_val = dev_priv->saveDSPCSTRIDE;
- dsplinoff_val = dev_priv->saveDSPCLINOFF;
- dsptileoff_val = dev_priv->saveDSPCTILEOFF;
- dspsize_val = dev_priv->saveDSPCSIZE;
- dsppos_val = dev_priv->saveDSPCPOS;
- dspsurf_val = dev_priv->saveDSPCSURF;
- dspstatus_val = dev_priv->saveDSPCSTATUS;
- mipi_val = dev_priv->saveMIPI_C;
- dspcntr_val = dev_priv->saveDSPCCNTR;
- palette_val = dev_priv->save_palette_c;
-
- dsi_config = dev_priv->dsi_configs[1];
- break;
- default:
- DRM_ERROR("%s, invalid pipe number.\n", __func__);
- return -EINVAL;
- }
-
- /* Make sure VGA plane is off. it initializes to on after reset!*/
- PSB_WVDC32(0x80000000, VGACNTRL);
- if (pipe == 1) {
- PSB_WVDC32(dpll_val & ~DPLL_VCO_ENABLE, dpll_reg);
- PSB_RVDC32(dpll_reg);
-
- PSB_WVDC32(fp_val, fp_reg);
- } else {
- dpll = PSB_RVDC32(dpll_reg);
-
- if (!(dpll & DPLL_VCO_ENABLE)) {
-
- /* When ungating power of DPLL, needs to wait 0.5us before enable the VCO */
- if (dpll & MDFLD_PWR_GATE_EN) {
- dpll &= ~MDFLD_PWR_GATE_EN;
- PSB_WVDC32(dpll, dpll_reg);
- udelay(500); /* FIXME: 1 ? */
- }
-
- PSB_WVDC32(fp_val, fp_reg);
- PSB_WVDC32(dpll_val, dpll_reg);
- /* FIXME_MDFLD PO - change 500 to 1 after PO */
- udelay(500);
-
- dpll_val |= DPLL_VCO_ENABLE;
- PSB_WVDC32(dpll_val, dpll_reg);
- PSB_RVDC32(dpll_reg);
-
- /* wait for DSI PLL to lock */
- while ((timeout < 20000) && !(PSB_RVDC32(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) {
- udelay(150);
- timeout++;
- }
-
- if (timeout == 20000) {
- DRM_ERROR("%s, can't lock DSIPLL.\n",
- __func__);
- return -EINVAL;
- }
- }
- }
- /* Restore mode */
- PSB_WVDC32(htot_val, htot_reg);
- PSB_WVDC32(hblank_val, hblank_reg);
- PSB_WVDC32(hsync_val, hsync_reg);
- PSB_WVDC32(vtot_val, vtot_reg);
- PSB_WVDC32(vblank_val, vblank_reg);
- PSB_WVDC32(vsync_val, vsync_reg);
- PSB_WVDC32(pipesrc_val, pipesrc_reg);
- PSB_WVDC32(dspstatus_val, dspstatus_reg);
-
- /* Set up the plane */
- PSB_WVDC32(dspstride_val, dspstride_reg);
- PSB_WVDC32(dsplinoff_val, dsplinoff_reg);
- PSB_WVDC32(dsptileoff_val, dsptileoff_reg);
- PSB_WVDC32(dspsize_val, dspsize_reg);
- PSB_WVDC32(dsppos_val, dsppos_reg);
- PSB_WVDC32(dspsurf_val, dspsurf_reg);
-
- if (pipe == 1) {
- PSB_WVDC32(dev_priv->savePFIT_CONTROL, PFIT_CONTROL);
- PSB_WVDC32(dev_priv->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
- PSB_WVDC32(dev_priv->saveHDMIPHYMISCCTL, HDMIPHYMISCCTL);
- PSB_WVDC32(dev_priv->saveHDMIB_CONTROL, HDMIB_CONTROL);
-
- } else {
- /* Set up pipe related registers */
- PSB_WVDC32(mipi_val, mipi_reg);
- /* Setup MIPI adapter + MIPI IP registers */
- mdfld_dsi_controller_init(dsi_config, pipe);
- msleep(20);
- }
- /* Enable the plane */
- PSB_WVDC32(dspcntr_val, dspcntr_reg);
- msleep(20);
- /* Enable the pipe */
- PSB_WVDC32(pipeconf_val, pipeconf_reg);
-
- for (i = 0; i < 256; i++)
- PSB_WVDC32(palette_val[i], palette_reg + (i<<2));
- if (pipe == 1)
- return 0;
- if (!mdfld_panel_dpi(dev))
- mdfld_enable_te(dev, pipe);
- return 0;
-}
-
-/**
- * mdfld_restore_cursor_overlay_registers - restore cursor
- * @dev: our device
- *
- * Restore the cursor and overlay state that was saved earlier
- */
-static int mdfld_restore_cursor_overlay_registers(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- /* Enable Cursor A */
- PSB_WVDC32(dev_priv->saveDSPACURSOR_CTRL, CURACNTR);
- PSB_WVDC32(dev_priv->saveDSPACURSOR_POS, CURAPOS);
- PSB_WVDC32(dev_priv->saveDSPACURSOR_BASE, CURABASE);
-
- PSB_WVDC32(dev_priv->saveDSPBCURSOR_CTRL, CURBCNTR);
- PSB_WVDC32(dev_priv->saveDSPBCURSOR_POS, CURBPOS);
- PSB_WVDC32(dev_priv->saveDSPBCURSOR_BASE, CURBBASE);
-
- PSB_WVDC32(dev_priv->saveDSPCCURSOR_CTRL, CURCCNTR);
- PSB_WVDC32(dev_priv->saveDSPCCURSOR_POS, CURCPOS);
- PSB_WVDC32(dev_priv->saveDSPCCURSOR_BASE, CURCBASE);
-
- /* Restore HW overlay */
- PSB_WVDC32(dev_priv->saveOV_OVADD, OV_OVADD);
- PSB_WVDC32(dev_priv->saveOV_OGAMC0, OV_OGAMC0);
- PSB_WVDC32(dev_priv->saveOV_OGAMC1, OV_OGAMC1);
- PSB_WVDC32(dev_priv->saveOV_OGAMC2, OV_OGAMC2);
- PSB_WVDC32(dev_priv->saveOV_OGAMC3, OV_OGAMC3);
- PSB_WVDC32(dev_priv->saveOV_OGAMC4, OV_OGAMC4);
- PSB_WVDC32(dev_priv->saveOV_OGAMC5, OV_OGAMC5);
-
- PSB_WVDC32(dev_priv->saveOV_OVADD_C, OV_OVADD + OV_C_OFFSET);
- PSB_WVDC32(dev_priv->saveOV_OGAMC0_C, OV_OGAMC0 + OV_C_OFFSET);
- PSB_WVDC32(dev_priv->saveOV_OGAMC1_C, OV_OGAMC1 + OV_C_OFFSET);
- PSB_WVDC32(dev_priv->saveOV_OGAMC2_C, OV_OGAMC2 + OV_C_OFFSET);
- PSB_WVDC32(dev_priv->saveOV_OGAMC3_C, OV_OGAMC3 + OV_C_OFFSET);
- PSB_WVDC32(dev_priv->saveOV_OGAMC4_C, OV_OGAMC4 + OV_C_OFFSET);
- PSB_WVDC32(dev_priv->saveOV_OGAMC5_C, OV_OGAMC5 + OV_C_OFFSET);
-
- return 0;
-}
-
-/**
- * mdfld_save_display_registers - save registers lost on suspend
- * @dev: our DRM device
- *
- * Save the state we need in order to be able to restore the interface
- * upon resume from suspend
- */
-static int mdfld_save_registers(struct drm_device *dev)
-{
- /* FIXME: We need to shut down panels here if using them
- and once the right bits are merged */
- mdfld_save_cursor_overlay_registers(dev);
- mdfld_save_display_registers(dev, 0);
- mdfld_save_display_registers(dev, 0);
- mdfld_save_display_registers(dev, 2);
- mdfld_save_display_registers(dev, 1);
- mdfld_disable_crtc(dev, 0);
- mdfld_disable_crtc(dev, 2);
- mdfld_disable_crtc(dev, 1);
- return 0;
-}
-
-/**
- * mdfld_restore_display_registers - restore lost register state
- * @dev: our DRM device
- *
- * Restore register state that was lost during suspend and resume.
- */
-static int mdfld_restore_registers(struct drm_device *dev)
-{
- mdfld_restore_display_registers(dev, 1);
- mdfld_restore_display_registers(dev, 0);
- mdfld_restore_display_registers(dev, 2);
- mdfld_restore_cursor_overlay_registers(dev);
- return 0;
-}
-
-static int mdfld_power_down(struct drm_device *dev)
-{
- /* FIXME */
- return 0;
-}
-
-static int mdfld_power_up(struct drm_device *dev)
-{
- /* FIXME */
- return 0;
-}
-
-const struct psb_ops mdfld_chip_ops = {
- .name = "Medfield",
- .accel_2d = 0,
- .pipes = 3,
- .crtcs = 2,
- .sgx_offset = MRST_SGX_OFFSET,
-
- .chip_setup = mid_chip_setup,
-
- .crtc_helper = &mdfld_helper_funcs,
- .crtc_funcs = &mdfld_intel_crtc_funcs,
-
- .output_init = mdfld_output_init,
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- .backlight_init = mdfld_backlight_init,
-#endif
-
- .init_pm = mdfld_init_pm,
- .save_regs = mdfld_save_registers,
- .restore_regs = mdfld_restore_registers,
- .power_down = mdfld_power_down,
- .power_up = mdfld_power_up,
-};
-
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * jim liu <jim.liu@intel.com>
- * Jackie Li<yaodong.li@intel.com>
- */
-
-#include "mdfld_dsi_dbi.h"
-#include "mdfld_dsi_dbi_dpu.h"
-#include "mdfld_dsi_pkg_sender.h"
-
-#include "power.h"
-#include <linux/pm_runtime.h>
-
-int enable_gfx_rtpm;
-
-extern struct drm_device *gpDrmDevice;
-extern int gfxrtdelay;
-int enter_dsr;
-struct mdfld_dsi_dbi_output *gdbi_output;
-extern bool gbgfxsuspended;
-extern int enable_gfx_rtpm;
-extern int gfxrtdelay;
-
-#define MDFLD_DSR_MAX_IDLE_COUNT 2
-
-/*
- * set refreshing area
- */
-int mdfld_dsi_dbi_update_area(struct mdfld_dsi_dbi_output *dbi_output,
- u16 x1, u16 y1, u16 x2, u16 y2)
-{
- struct mdfld_dsi_pkg_sender *sender =
- mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base);
- u8 param[4];
- u8 cmd;
- int err;
-
- if (!sender) {
- WARN_ON(1);
- return -EINVAL;
- }
-
- /* Set column */
- cmd = DCS_SET_COLUMN_ADDRESS;
- param[0] = x1 >> 8;
- param[1] = x1;
- param[2] = x2 >> 8;
- param[3] = x2;
-
- err = mdfld_dsi_send_dcs(sender,
- cmd,
- param,
- 4,
- CMD_DATA_SRC_SYSTEM_MEM,
- MDFLD_DSI_QUEUE_PACKAGE);
- if (err) {
- dev_err(sender->dev->dev, "DCS 0x%x sent failed\n", cmd);
- goto err_out;
- }
-
- /* Set page */
- cmd = DCS_SET_PAGE_ADDRESS;
- param[0] = y1 >> 8;
- param[1] = y1;
- param[2] = y2 >> 8;
- param[3] = y2;
-
- err = mdfld_dsi_send_dcs(sender,
- cmd,
- param,
- 4,
- CMD_DATA_SRC_SYSTEM_MEM,
- MDFLD_DSI_QUEUE_PACKAGE);
- if (err) {
- dev_err(sender->dev->dev, "DCS 0x%x sent failed\n", cmd);
- goto err_out;
- }
-
- /*update screen*/
- err = mdfld_dsi_send_dcs(sender,
- write_mem_start,
- NULL,
- 0,
- CMD_DATA_SRC_PIPE,
- MDFLD_DSI_QUEUE_PACKAGE);
- if (err) {
- dev_err(sender->dev->dev, "DCS 0x%x sent failed\n", cmd);
- goto err_out;
- }
- mdfld_dsi_cmds_kick_out(sender);
-err_out:
- return err;
-}
-
-/*
- * set panel's power state
- */
-int mdfld_dsi_dbi_update_power(struct mdfld_dsi_dbi_output *dbi_output,
- int mode)
-{
- struct drm_device *dev = dbi_output->dev;
- struct mdfld_dsi_pkg_sender *sender =
- mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base);
- u8 param = 0;
- u32 err = 0;
-
- if (!sender) {
- WARN_ON(1);
- return -EINVAL;
- }
-
- if (mode == DRM_MODE_DPMS_ON) {
- /* Exit sleep mode */
- err = mdfld_dsi_send_dcs(sender,
- DCS_EXIT_SLEEP_MODE,
- NULL,
- 0,
- CMD_DATA_SRC_SYSTEM_MEM,
- MDFLD_DSI_QUEUE_PACKAGE);
- if (err) {
- dev_err(dev->dev, "DCS 0x%x sent failed\n",
- DCS_EXIT_SLEEP_MODE);
- goto power_err;
- }
-
- /* Set display on */
- err = mdfld_dsi_send_dcs(sender,
- DCS_SET_DISPLAY_ON,
- NULL,
- 0,
- CMD_DATA_SRC_SYSTEM_MEM,
- MDFLD_DSI_QUEUE_PACKAGE);
- if (err) {
- dev_err(dev->dev, "DCS 0x%x sent failed\n",
- DCS_SET_DISPLAY_ON);
- goto power_err;
- }
-
- /* set tear effect on */
- err = mdfld_dsi_send_dcs(sender,
- DCS_SET_TEAR_ON,
- ¶m,
- 1,
- CMD_DATA_SRC_SYSTEM_MEM,
- MDFLD_DSI_QUEUE_PACKAGE);
- if (err) {
- dev_err(dev->dev, "DCS 0x%x sent failed\n",
- set_tear_on);
- goto power_err;
- }
-
- /**
- * FIXME: remove this later
- */
- err = mdfld_dsi_send_dcs(sender,
- DCS_WRITE_MEM_START,
- NULL,
- 0,
- CMD_DATA_SRC_PIPE,
- MDFLD_DSI_QUEUE_PACKAGE);
- if (err) {
- dev_err(dev->dev, "DCS 0x%x sent failed\n",
- DCS_WRITE_MEM_START);
- goto power_err;
- }
- } else {
- /* Set tear effect off */
- err = mdfld_dsi_send_dcs(sender,
- DCS_SET_TEAR_OFF,
- NULL,
- 0,
- CMD_DATA_SRC_SYSTEM_MEM,
- MDFLD_DSI_QUEUE_PACKAGE);
- if (err) {
- dev_err(dev->dev, "DCS 0x%x sent failed\n",
- DCS_SET_TEAR_OFF);
- goto power_err;
- }
-
- /* Turn display off */
- err = mdfld_dsi_send_dcs(sender,
- DCS_SET_DISPLAY_OFF,
- NULL,
- 0,
- CMD_DATA_SRC_SYSTEM_MEM,
- MDFLD_DSI_QUEUE_PACKAGE);
- if (err) {
- dev_err(dev->dev, "DCS 0x%x sent failed\n",
- DCS_SET_DISPLAY_OFF);
- goto power_err;
- }
-
- /* Now enter sleep mode */
- err = mdfld_dsi_send_dcs(sender,
- DCS_ENTER_SLEEP_MODE,
- NULL,
- 0,
- CMD_DATA_SRC_SYSTEM_MEM,
- MDFLD_DSI_QUEUE_PACKAGE);
- if (err) {
- dev_err(dev->dev, "DCS 0x%x sent failed\n",
- DCS_ENTER_SLEEP_MODE);
- goto power_err;
- }
- }
- mdfld_dsi_cmds_kick_out(sender);
-power_err:
- return err;
-}
-
-/*
- * send a generic DCS command with a parameter list
- */
-int mdfld_dsi_dbi_send_dcs(struct mdfld_dsi_dbi_output *dbi_output,
- u8 dcs, u8 *param, u32 num, u8 data_src)
-{
- struct mdfld_dsi_pkg_sender *sender =
- mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base);
- int ret;
-
- if (!sender) {
- WARN_ON(1);
- return -EINVAL;
- }
-
- ret = mdfld_dsi_send_dcs(sender,
- dcs,
- param,
- num,
- data_src,
- MDFLD_DSI_SEND_PACKAGE);
-
- return ret;
-}
-
-/*
- * Enter DSR
- */
-void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output, int pipe)
-{
- u32 reg_val;
- struct drm_device *dev = dbi_output->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc = dbi_output->base.base.crtc;
- struct psb_intel_crtc *psb_crtc = (crtc) ?
- to_psb_intel_crtc(crtc) : NULL;
- u32 dpll_reg = MRST_DPLL_A;
- u32 pipeconf_reg = PIPEACONF;
- u32 dspcntr_reg = DSPACNTR;
-
- if (!dbi_output)
- return;
-
- /* FIXME check if can go */
- dev_priv->is_in_idle = true;
-
- gdbi_output = dbi_output;
- if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) ||
- (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING))
- return;
-
- if (pipe == 2) {
- dpll_reg = MRST_DPLL_A;
- pipeconf_reg = PIPECCONF;
- dspcntr_reg = DSPCCNTR;
- }
-
- if (!gma_power_begin(dev, true)) {
- dev_err(dev->dev, "hw begin failed\n");
- return;
- }
- /* Disable te interrupts */
- mdfld_disable_te(dev, pipe);
-
- /* Disable plane */
- reg_val = REG_READ(dspcntr_reg);
- if (!(reg_val & DISPLAY_PLANE_ENABLE)) {
- REG_WRITE(dspcntr_reg, reg_val & ~DISPLAY_PLANE_ENABLE);
- REG_READ(dspcntr_reg);
- }
-
- /* Disable pipe */
- reg_val = REG_READ(pipeconf_reg);
- if (!(reg_val & DISPLAY_PLANE_ENABLE)) {
- reg_val &= ~DISPLAY_PLANE_ENABLE;
- reg_val |= (PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF);
- REG_WRITE(pipeconf_reg, reg_val);
- REG_READ(pipeconf_reg);
- mdfldWaitForPipeDisable(dev, pipe);
- }
-
- /* Disable DPLL */
- reg_val = REG_READ(dpll_reg);
- if (!(reg_val & DPLL_VCO_ENABLE)) {
- reg_val &= ~DPLL_VCO_ENABLE;
- REG_WRITE(dpll_reg, reg_val);
- REG_READ(dpll_reg);
- udelay(500);
- }
-
- gma_power_end(dev);
- dbi_output->mode_flags |= MODE_SETTING_IN_DSR;
- if (pipe == 2) {
- enter_dsr = 1;
- /* pm_schedule_suspend(&dev->pdev->dev, gfxrtdelay); */
- }
-}
-
-static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output,
- int pipe)
-{
- struct drm_device *dev = dbi_output->dev;
- struct drm_crtc *crtc = dbi_output->base.base.crtc;
- struct psb_intel_crtc *psb_crtc = (crtc) ?
- to_psb_intel_crtc(crtc) : NULL;
- u32 reg_val;
- u32 dpll_reg = MRST_DPLL_A;
- u32 pipeconf_reg = PIPEACONF;
- u32 dspcntr_reg = DSPACNTR;
- u32 reg_offset = 0;
-
- /*if mode setting on-going, back off*/
- if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) ||
- (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING))
- return;
-
- if (pipe == 2) {
- dpll_reg = MRST_DPLL_A;
- pipeconf_reg = PIPECCONF;
- dspcntr_reg = DSPCCNTR;
- reg_offset = MIPIC_REG_OFFSET;
- }
-
- if (!gma_power_begin(dev, true)) {
- dev_err(dev->dev, "hw begin failed\n");
- return;
- }
-
- /* Enable DPLL */
- reg_val = REG_READ(dpll_reg);
- if (!(reg_val & DPLL_VCO_ENABLE)) {
- if (reg_val & MDFLD_PWR_GATE_EN) {
- reg_val &= ~MDFLD_PWR_GATE_EN;
- REG_WRITE(dpll_reg, reg_val);
- REG_READ(dpll_reg);
- udelay(500);
- }
-
- reg_val |= DPLL_VCO_ENABLE;
- REG_WRITE(dpll_reg, reg_val);
- REG_READ(dpll_reg);
- udelay(500);
-
- /* Add timeout */
- while (!(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK))
- cpu_relax();
- }
-
- /* Enable pipe */
- reg_val = REG_READ(pipeconf_reg);
- if (!(reg_val & PIPEACONF_ENABLE)) {
- reg_val |= PIPEACONF_ENABLE;
- REG_WRITE(pipeconf_reg, reg_val);
- REG_READ(pipeconf_reg);
- udelay(500);
- mdfldWaitForPipeEnable(dev, pipe);
- }
-
- /* Enable plane */
- reg_val = REG_READ(dspcntr_reg);
- if (!(reg_val & DISPLAY_PLANE_ENABLE)) {
- reg_val |= DISPLAY_PLANE_ENABLE;
- REG_WRITE(dspcntr_reg, reg_val);
- REG_READ(dspcntr_reg);
- udelay(500);
- }
-
- /* Enable TE interrupt on this pipe */
- mdfld_enable_te(dev, pipe);
- gma_power_end(dev);
-
- /*clean IN_DSR flag*/
- dbi_output->mode_flags &= ~MODE_SETTING_IN_DSR;
-}
-
-/*
- * Exit from DSR
- */
-void mdfld_dsi_dbi_exit_dsr(struct drm_device *dev, u32 update_src)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info;
- struct mdfld_dsi_dbi_output **dbi_output;
- int i;
- int pipe;
-
- /* FIXME can go ? */
- dev_priv->is_in_idle = false;
- dbi_output = dsr_info->dbi_outputs;
-
-#ifdef CONFIG_PM_RUNTIME
- if (!enable_gfx_rtpm) {
-/* pm_runtime_allow(&gpDrmDevice->pdev->dev); */
-/* schedule_delayed_work(&rtpm_work, 30 * 1000);*/ /* FIXME: HZ ? */
- }
-#endif
-
- /* For each output, exit dsr */
- for (i = 0; i < dsr_info->dbi_output_num; i++) {
- /* If panel has been turned off, skip */
- if (!dbi_output[i] || !dbi_output[i]->dbi_panel_on)
- continue;
- pipe = dbi_output[i]->channel_num ? 2 : 0;
- enter_dsr = 0;
- mdfld_dbi_output_exit_dsr(dbi_output[i], pipe);
- }
- dev_priv->dsr_fb_update |= update_src;
-}
-
-static bool mdfld_dbi_is_in_dsr(struct drm_device *dev)
-{
- if (REG_READ(MRST_DPLL_A) & DPLL_VCO_ENABLE)
- return false;
- if ((REG_READ(PIPEACONF) & PIPEACONF_ENABLE) ||
- (REG_READ(PIPECCONF) & PIPEACONF_ENABLE))
- return false;
- if ((REG_READ(DSPACNTR) & DISPLAY_PLANE_ENABLE) ||
- (REG_READ(DSPCCNTR) & DISPLAY_PLANE_ENABLE))
- return false;
-
- return true;
-}
-
-/* Periodically update dbi panel */
-void mdfld_dbi_update_panel(struct drm_device *dev, int pipe)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info;
- struct mdfld_dsi_dbi_output **dbi_outputs;
- struct mdfld_dsi_dbi_output *dbi_output;
- int i;
- int can_enter_dsr = 0;
- u32 damage_mask;
-
- dbi_outputs = dsr_info->dbi_outputs;
- dbi_output = pipe ? dbi_outputs[1] : dbi_outputs[0];
-
- if (!dbi_output)
- return;
-
- if (pipe == 0)
- damage_mask = dev_priv->dsr_fb_update & MDFLD_DSR_DAMAGE_MASK_0;
- else if (pipe == 2)
- damage_mask = dev_priv->dsr_fb_update & MDFLD_DSR_DAMAGE_MASK_2;
- else
- return;
-
- /* If FB is damaged and panel is on update on-panel FB */
- if (damage_mask && dbi_output->dbi_panel_on) {
- dbi_output->dsr_fb_update_done = false;
-
- if (dbi_output->p_funcs->update_fb)
- dbi_output->p_funcs->update_fb(dbi_output, pipe);
-
- if (dev_priv->dsr_enable && dbi_output->dsr_fb_update_done)
- dev_priv->dsr_fb_update &= ~damage_mask;
-
- /*clean IN_DSR flag*/
- dbi_output->mode_flags &= ~MODE_SETTING_IN_DSR;
-
- dbi_output->dsr_idle_count = 0;
- } else {
- dbi_output->dsr_idle_count++;
- }
-
- switch (dsr_info->dbi_output_num) {
- case 1:
- if (dbi_output->dsr_idle_count > MDFLD_DSR_MAX_IDLE_COUNT)
- can_enter_dsr = 1;
- break;
- case 2:
- if (dbi_outputs[0]->dsr_idle_count > MDFLD_DSR_MAX_IDLE_COUNT
- && dbi_outputs[1]->dsr_idle_count > MDFLD_DSR_MAX_IDLE_COUNT)
- can_enter_dsr = 1;
- break;
- default:
- DRM_ERROR("Wrong DBI output number\n");
- }
-
- /* Try to enter DSR */
- if (can_enter_dsr) {
- for (i = 0; i < dsr_info->dbi_output_num; i++) {
- if (!mdfld_dbi_is_in_dsr(dev) && dbi_outputs[i] &&
- !(dbi_outputs[i]->mode_flags & MODE_SETTING_ON_GOING)) {
- mdfld_dsi_dbi_enter_dsr(dbi_outputs[i],
- dbi_outputs[i]->channel_num ? 2 : 0);
-#if 0
- enter_dsr = 1;
- pr_err("%s: enter_dsr = 1\n", __func__);
-#endif
- }
- }
- /*schedule rpm suspend after gfxrtdelay*/
-#ifdef CONFIG_GFX_RTPM
- if (!dev_priv->rpm_enabled
- || !enter_dsr
- /* || (REG_READ(HDMIB_CONTROL) & HDMIB_PORT_EN) */
- || pm_schedule_suspend(&dev->pdev->dev, gfxrtdelay))
- dev_warn(dev->dev,
- "Runtime PM schedule suspend failed, rpm %d\n",
- dev_priv->rpm_enabled);
-#endif
- }
-}
-
-int mdfld_dbi_dsr_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info;
-
- if (!dsr_info || IS_ERR(dsr_info)) {
- dsr_info = kzalloc(sizeof(struct mdfld_dbi_dsr_info),
- GFP_KERNEL);
- if (!dsr_info) {
- dev_err(dev->dev, "No memory\n");
- return -ENOMEM;
- }
- dev_priv->dbi_dsr_info = dsr_info;
- }
- return 0;
-}
-
-void mdfld_dbi_dsr_exit(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info;
-
- if (dsr_info) {
- kfree(dsr_info);
- dev_priv->dbi_dsr_info = NULL;
- }
-}
-
-void mdfld_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config,
- int pipe)
-{
- struct drm_device *dev = dsi_config->dev;
- u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0;
- int lane_count = dsi_config->lane_count;
- u32 val = 0;
-
- dev_dbg(dev->dev, "Init DBI interface on pipe %d...\n", pipe);
-
- /* Un-ready device */
- REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000);
-
- /* Init dsi adapter before kicking off */
- REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018);
-
- /* TODO: figure out how to setup these registers */
- REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408);
- REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset),
- 0x000a0014);
- REG_WRITE((MIPIA_DBI_BW_CTRL_REG + reg_offset), 0x00000400);
- REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000001);
- REG_WRITE((MIPIA_HS_LS_DBI_ENABLE_REG + reg_offset), 0x00000000);
-
- /* Enable all interrupts */
- REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff);
- /* Max value: 20 clock cycles of txclkesc */
- REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x0000001f);
- /* Min 21 txclkesc, max: ffffh */
- REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0x0000ffff);
- /* Min: 7d0 max: 4e20 */
- REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x00000fa0);
-
- /* Set up func_prg */
- val |= lane_count;
- val |= (dsi_config->channel_num << DSI_DBI_VIRT_CHANNEL_OFFSET);
- val |= DSI_DBI_COLOR_FORMAT_OPTION2;
- REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val);
-
- REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), 0x3fffff);
- REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff);
-
- /* De-assert dbi_stall when half of DBI FIFO is empty */
- /* REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000000); */
-
- REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46);
- REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000000);
- REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004);
- REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001);
-}
-
-#if 0
-/*DBI encoder helper funcs*/
-static const struct drm_encoder_helper_funcs mdfld_dsi_dbi_helper_funcs = {
- .dpms = mdfld_dsi_dbi_dpms,
- .mode_fixup = mdfld_dsi_dbi_mode_fixup,
- .prepare = mdfld_dsi_dbi_prepare,
- .mode_set = mdfld_dsi_dbi_mode_set,
- .commit = mdfld_dsi_dbi_commit,
-};
-
-/*DBI encoder funcs*/
-static const struct drm_encoder_funcs mdfld_dsi_dbi_encoder_funcs = {
- .destroy = drm_encoder_cleanup,
-};
-
-#endif
-
-/*
- * Init DSI DBI encoder.
- * Allocate an mdfld_dsi_encoder and attach it to given @dsi_connector
- * return pointer of newly allocated DBI encoder, NULL on error
- */
-struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev,
- struct mdfld_dsi_connector *dsi_connector,
- struct panel_funcs *p_funcs)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dsi_dbi_output *dbi_output = NULL;
- struct mdfld_dsi_config *dsi_config;
- struct drm_connector *connector = NULL;
- struct drm_encoder *encoder = NULL;
- struct drm_display_mode *fixed_mode = NULL;
- struct psb_gtt *pg = dev_priv ? (&dev_priv->gtt) : NULL;
- struct mdfld_dbi_dpu_info *dpu_info = dev_priv ? (dev_priv->dbi_dpu_info) : NULL;
- struct mdfld_dbi_dsr_info *dsr_info = dev_priv ? (dev_priv->dbi_dsr_info) : NULL;
- u32 data = 0;
- int pipe;
- int ret;
-
- if (!pg || !dsi_connector || !p_funcs) {
- WARN_ON(1);
- return NULL;
- }
-
- dsi_config = mdfld_dsi_get_config(dsi_connector);
- pipe = dsi_connector->pipe;
-
- /*panel hard-reset*/
- if (p_funcs->reset) {
- ret = p_funcs->reset(pipe);
- if (ret) {
- DRM_ERROR("Panel %d hard-reset failed\n", pipe);
- return NULL;
- }
- }
- /* Panel drvIC init */
- if (p_funcs->drv_ic_init)
- p_funcs->drv_ic_init(dsi_config, pipe);
-
- /* Panel power mode detect */
- ret = mdfld_dsi_get_power_mode(dsi_config,
- &data,
- MDFLD_DSI_HS_TRANSMISSION);
- if (ret) {
- DRM_ERROR("Panel %d get power mode failed\n", pipe);
- dsi_connector->status = connector_status_disconnected;
- } else {
- DRM_INFO("pipe %d power mode 0x%x\n", pipe, data);
- dsi_connector->status = connector_status_connected;
- }
-
- /*TODO: get panel info from DDB*/
-
- dbi_output = kzalloc(sizeof(struct mdfld_dsi_dbi_output), GFP_KERNEL);
- if (!dbi_output) {
- dev_err(dev->dev, "No memory\n");
- return NULL;
- }
-
- if (dsi_connector->pipe == 0) {
- dbi_output->channel_num = 0;
- dev_priv->dbi_output = dbi_output;
- } else if (dsi_connector->pipe == 2) {
- dbi_output->channel_num = 1;
- dev_priv->dbi_output2 = dbi_output;
- } else {
- dev_err(dev->dev, "only support 2 DSI outputs\n");
- goto out_err1;
- }
-
- dbi_output->dev = dev;
- dbi_output->p_funcs = p_funcs;
- fixed_mode = dsi_config->fixed_mode;
- dbi_output->panel_fixed_mode = fixed_mode;
-
- /* Create drm encoder object */
- connector = &dsi_connector->base.base;
- encoder = &dbi_output->base.base;
- /* Review this if we ever get MIPI-HDMI bridges or similar */
- drm_encoder_init(dev,
- encoder,
- p_funcs->encoder_funcs,
- DRM_MODE_ENCODER_LVDS);
- drm_encoder_helper_add(encoder, p_funcs->encoder_helper_funcs);
-
- /* Attach to given connector */
- drm_mode_connector_attach_encoder(connector, encoder);
-
- /* Set possible CRTCs and clones */
- if (dsi_connector->pipe) {
- encoder->possible_crtcs = (1 << 2);
- encoder->possible_clones = (1 << 1);
- } else {
- encoder->possible_crtcs = (1 << 0);
- encoder->possible_clones = (1 << 0);
- }
-
- dev_priv->dsr_fb_update = 0;
- dev_priv->dsr_enable = false;
- dev_priv->exit_idle = mdfld_dsi_dbi_exit_dsr;
-
- dbi_output->first_boot = true;
- dbi_output->mode_flags = MODE_SETTING_IN_ENCODER;
-
- /* Add this output to dpu_info if in DPU mode */
- if (dpu_info && dsi_connector->status == connector_status_connected) {
- if (dsi_connector->pipe == 0)
- dpu_info->dbi_outputs[0] = dbi_output;
- else
- dpu_info->dbi_outputs[1] = dbi_output;
-
- dpu_info->dbi_output_num++;
- } else if (dsi_connector->status == connector_status_connected) {
- /* Add this output to dsr_info if not */
- if (dsi_connector->pipe == 0)
- dsr_info->dbi_outputs[0] = dbi_output;
- else
- dsr_info->dbi_outputs[1] = dbi_output;
-
- dsr_info->dbi_output_num++;
- }
- return &dbi_output->base;
-out_err1:
- kfree(dbi_output);
- return NULL;
-}
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * jim liu <jim.liu@intel.com>
- * Jackie Li<yaodong.li@intel.com>
- */
-
-#ifndef __MDFLD_DSI_DBI_H__
-#define __MDFLD_DSI_DBI_H__
-
-#include <linux/backlight.h>
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include <drm/drm_crtc.h>
-#include <drm/drm_edid.h>
-
-#include "psb_drv.h"
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "power.h"
-
-#include "mdfld_dsi_output.h"
-#include "mdfld_output.h"
-
-/*
- * DBI encoder which inherits from mdfld_dsi_encoder
- */
-struct mdfld_dsi_dbi_output {
- struct mdfld_dsi_encoder base;
- struct drm_display_mode *panel_fixed_mode;
- u8 last_cmd;
- u8 lane_count;
- u8 channel_num;
- struct drm_device *dev;
-
- /* Backlight operations */
-
- /* DSR timer */
- u32 dsr_idle_count;
- bool dsr_fb_update_done;
-
- /* Mode setting flags */
- u32 mode_flags;
-
- /* Panel status */
- bool dbi_panel_on;
- bool first_boot;
- struct panel_funcs *p_funcs;
-
- /* DPU */
- u32 *dbi_cb_addr;
- u32 dbi_cb_phy;
- spinlock_t cb_lock;
- u32 cb_write;
-};
-
-#define MDFLD_DSI_DBI_OUTPUT(dsi_encoder) \
- container_of(dsi_encoder, struct mdfld_dsi_dbi_output, base)
-
-struct mdfld_dbi_dsr_info {
- int dbi_output_num;
- struct mdfld_dsi_dbi_output *dbi_outputs[2];
-
- u32 dsr_idle_count;
-};
-
-#define DBI_CB_TIMEOUT_COUNT 0xffff
-
-/* Offsets */
-#define CMD_MEM_ADDR_OFFSET 0
-
-#define CMD_DATA_SRC_SYSTEM_MEM 0
-#define CMD_DATA_SRC_PIPE 1
-
-static inline int mdfld_dsi_dbi_fifo_ready(struct mdfld_dsi_dbi_output *dbi_output)
-{
- struct drm_device *dev = dbi_output->dev;
- u32 retry = DBI_CB_TIMEOUT_COUNT;
- int reg_offset = (dbi_output->channel_num == 1) ? MIPIC_REG_OFFSET : 0;
- int ret = 0;
-
- /* Query the dbi fifo status*/
- while (retry--) {
- if (REG_READ(MIPIA_GEN_FIFO_STAT_REG + reg_offset) & (1 << 27))
- break;
- }
-
- if (!retry) {
- DRM_ERROR("Timeout waiting for DBI FIFO empty\n");
- ret = -EAGAIN;
- }
- return ret;
-}
-
-static inline int mdfld_dsi_dbi_cmd_sent(struct mdfld_dsi_dbi_output *dbi_output)
-{
- struct drm_device *dev = dbi_output->dev;
- u32 retry = DBI_CB_TIMEOUT_COUNT;
- int reg_offset = (dbi_output->channel_num == 1) ? MIPIC_REG_OFFSET : 0;
- int ret = 0;
-
- /* Query the command execution status */
- while (retry--)
- if (!(REG_READ(MIPIA_CMD_ADD_REG + reg_offset) & (1 << 0)))
- break;
-
- if (!retry) {
- DRM_ERROR("Timeout waiting for DBI command status\n");
- ret = -EAGAIN;
- }
-
- return ret;
-}
-
-static inline int mdfld_dsi_dbi_cb_ready(struct mdfld_dsi_dbi_output *dbi_output)
-{
- int ret = 0;
-
- /* Query the command execution status*/
- ret = mdfld_dsi_dbi_cmd_sent(dbi_output);
- if (ret) {
- DRM_ERROR("Peripheral is busy\n");
- ret = -EAGAIN;
- }
- /* Query the dbi fifo status*/
- ret = mdfld_dsi_dbi_fifo_ready(dbi_output);
- if (ret) {
- DRM_ERROR("DBI FIFO is not empty\n");
- ret = -EAGAIN;
- }
- return ret;
-}
-
-extern void mdfld_dsi_dbi_output_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev, int pipe);
-extern void mdfld_dsi_dbi_exit_dsr(struct drm_device *dev, u32 update_src);
-extern void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output,
- int pipe);
-extern int mdfld_dbi_dsr_init(struct drm_device *dev);
-extern void mdfld_dbi_dsr_exit(struct drm_device *dev);
-extern struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev,
- struct mdfld_dsi_connector *dsi_connector,
- struct panel_funcs *p_funcs);
-extern int mdfld_dsi_dbi_send_dcs(struct mdfld_dsi_dbi_output *dbi_output,
- u8 dcs, u8 *param, u32 num, u8 data_src);
-extern int mdfld_dsi_dbi_update_area(struct mdfld_dsi_dbi_output *dbi_output,
- u16 x1, u16 y1, u16 x2, u16 y2);
-extern int mdfld_dsi_dbi_update_power(struct mdfld_dsi_dbi_output *dbi_output,
- int mode);
-extern void mdfld_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config,
- int pipe);
-
-#endif /*__MDFLD_DSI_DBI_H__*/
+++ /dev/null
-/*
- * Copyright © 2010-2011 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Jim Liu <jim.liu@intel.com>
- * Jackie Li<yaodong.li@intel.com>
- */
-
-#include "mdfld_dsi_dbi_dpu.h"
-#include "mdfld_dsi_dbi.h"
-
-/*
- * NOTE: all mdlfd_x_damage funcs should be called by holding dpu_update_lock
- */
-
-static int mdfld_cursor_damage(struct mdfld_dbi_dpu_info *dpu_info,
- mdfld_plane_t plane,
- struct psb_drm_dpu_rect *damaged_rect)
-{
- int x, y;
- int new_x, new_y;
- struct psb_drm_dpu_rect *rect;
- struct psb_drm_dpu_rect *pipe_rect;
- int cursor_size;
- struct mdfld_cursor_info *cursor;
- mdfld_plane_t fb_plane;
-
- if (plane == MDFLD_CURSORA) {
- cursor = &dpu_info->cursors[0];
- x = dpu_info->cursors[0].x;
- y = dpu_info->cursors[0].y;
- cursor_size = dpu_info->cursors[0].size;
- pipe_rect = &dpu_info->damage_pipea;
- fb_plane = MDFLD_PLANEA;
- } else {
- cursor = &dpu_info->cursors[1];
- x = dpu_info->cursors[1].x;
- y = dpu_info->cursors[1].y;
- cursor_size = dpu_info->cursors[1].size;
- pipe_rect = &dpu_info->damage_pipec;
- fb_plane = MDFLD_PLANEC;
- }
- new_x = damaged_rect->x;
- new_y = damaged_rect->y;
-
- if (x == new_x && y == new_y)
- return 0;
-
- rect = &dpu_info->damaged_rects[plane];
- /* Move to right */
- if (new_x >= x) {
- if (new_y > y) {
- rect->x = x;
- rect->y = y;
- rect->width = (new_x + cursor_size) - x;
- rect->height = (new_y + cursor_size) - y;
- goto cursor_out;
- } else {
- rect->x = x;
- rect->y = new_y;
- rect->width = (new_x + cursor_size) - x;
- rect->height = (y - new_y);
- goto cursor_out;
- }
- } else {
- if (new_y > y) {
- rect->x = new_x;
- rect->y = y;
- rect->width = (x + cursor_size) - new_x;
- rect->height = new_y - y;
- goto cursor_out;
- } else {
- rect->x = new_x;
- rect->y = new_y;
- rect->width = (x + cursor_size) - new_x;
- rect->height = (y + cursor_size) - new_y;
- }
- }
-cursor_out:
- if (new_x < 0)
- cursor->x = 0;
- else if (new_x > 864)
- cursor->x = 864;
- else
- cursor->x = new_x;
-
- if (new_y < 0)
- cursor->y = 0;
- else if (new_y > 480)
- cursor->y = 480;
- else
- cursor->y = new_y;
-
- /*
- * FIXME: this is a workaround for cursor plane update,
- * remove it later!
- */
- rect->x = 0;
- rect->y = 0;
- rect->width = 864;
- rect->height = 480;
-
- mdfld_check_boundary(dpu_info, rect);
- mdfld_dpu_region_extent(pipe_rect, rect);
-
- /* Update pending status of dpu_info */
- dpu_info->pending |= (1 << plane);
- /* Update fb panel as well */
- dpu_info->pending |= (1 << fb_plane);
- return 0;
-}
-
-static int mdfld_fb_damage(struct mdfld_dbi_dpu_info *dpu_info,
- mdfld_plane_t plane,
- struct psb_drm_dpu_rect *damaged_rect)
-{
- struct psb_drm_dpu_rect *rect;
-
- if (plane == MDFLD_PLANEA)
- rect = &dpu_info->damage_pipea;
- else
- rect = &dpu_info->damage_pipec;
-
- mdfld_check_boundary(dpu_info, damaged_rect);
-
- /* Add fb damage area to this pipe */
- mdfld_dpu_region_extent(rect, damaged_rect);
-
- /* Update pending status of dpu_info */
- dpu_info->pending |= (1 << plane);
- return 0;
-}
-
-/* Do nothing here, right now */
-static int mdfld_overlay_damage(struct mdfld_dbi_dpu_info *dpu_info,
- mdfld_plane_t plane,
- struct psb_drm_dpu_rect *damaged_rect)
-{
- return 0;
-}
-
-int mdfld_dbi_dpu_report_damage(struct drm_device *dev,
- mdfld_plane_t plane,
- struct psb_drm_dpu_rect *rect)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info;
- int ret = 0;
-
- /* DPU not in use, no damage reporting needed */
- if (dpu_info == NULL)
- return 0;
-
- spin_lock(&dpu_info->dpu_update_lock);
-
- switch (plane) {
- case MDFLD_PLANEA:
- case MDFLD_PLANEC:
- mdfld_fb_damage(dpu_info, plane, rect);
- break;
- case MDFLD_CURSORA:
- case MDFLD_CURSORC:
- mdfld_cursor_damage(dpu_info, plane, rect);
- break;
- case MDFLD_OVERLAYA:
- case MDFLD_OVERLAYC:
- mdfld_overlay_damage(dpu_info, plane, rect);
- break;
- default:
- DRM_ERROR("Invalid plane type %d\n", plane);
- ret = -EINVAL;
- }
- spin_unlock(&dpu_info->dpu_update_lock);
- return ret;
-}
-
-int mdfld_dbi_dpu_report_fullscreen_damage(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv;
- struct mdfld_dbi_dpu_info *dpu_info;
- struct mdfld_dsi_config *dsi_config;
- struct psb_drm_dpu_rect rect;
- int i;
-
- if (!dev) {
- DRM_ERROR("Invalid parameter\n");
- return -EINVAL;
- }
-
- dev_priv = dev->dev_private;
- dpu_info = dev_priv->dbi_dpu_info;
-
- /* This is fine - we may be in non DPU mode */
- if (!dpu_info)
- return -EINVAL;
-
- for (i = 0; i < dpu_info->dbi_output_num; i++) {
- dsi_config = dev_priv->dsi_configs[i];
- if (dsi_config) {
- rect.x = rect.y = 0;
- rect.width = dsi_config->fixed_mode->hdisplay;
- rect.height = dsi_config->fixed_mode->vdisplay;
- mdfld_dbi_dpu_report_damage(dev,
- i ? (MDFLD_PLANEC) : (MDFLD_PLANEA),
- &rect);
- }
- }
- /* Exit DSR state */
- mdfld_dpu_exit_dsr(dev);
- return 0;
-}
-
-int mdfld_dsi_dbi_dsr_off(struct drm_device *dev,
- struct psb_drm_dpu_rect *rect)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info;
-
- mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEA, rect);
-
- /* If dual display mode */
- if (dpu_info->dbi_output_num == 2)
- mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEC, rect);
-
- /* Force dsi to exit DSR mode */
- mdfld_dpu_exit_dsr(dev);
- return 0;
-}
-
-static void mdfld_dpu_cursor_plane_flush(struct mdfld_dbi_dpu_info *dpu_info,
- mdfld_plane_t plane)
-{
- struct drm_device *dev = dpu_info->dev;
- u32 curpos_reg = CURAPOS;
- u32 curbase_reg = CURABASE;
- u32 curcntr_reg = CURACNTR;
- struct mdfld_cursor_info *cursor = &dpu_info->cursors[0];
-
- if (plane == MDFLD_CURSORC) {
- curpos_reg = CURCPOS;
- curbase_reg = CURCBASE;
- curcntr_reg = CURCCNTR;
- cursor = &dpu_info->cursors[1];
- }
-
- REG_WRITE(curcntr_reg, REG_READ(curcntr_reg));
- REG_WRITE(curpos_reg,
- (((cursor->x & CURSOR_POS_MASK) << CURSOR_X_SHIFT) |
- ((cursor->y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT)));
- REG_WRITE(curbase_reg, REG_READ(curbase_reg));
-}
-
-static void mdfld_dpu_fb_plane_flush(struct mdfld_dbi_dpu_info *dpu_info,
- mdfld_plane_t plane)
-{
- u32 pipesrc_reg = PIPEASRC;
- u32 dspsize_reg = DSPASIZE;
- u32 dspoff_reg = DSPALINOFF;
- u32 dspsurf_reg = DSPASURF;
- u32 dspstride_reg = DSPASTRIDE;
- u32 stride;
- struct psb_drm_dpu_rect *rect = &dpu_info->damage_pipea;
- struct drm_device *dev = dpu_info->dev;
-
- if (plane == MDFLD_PLANEC) {
- pipesrc_reg = PIPECSRC;
- dspsize_reg = DSPCSIZE;
- dspoff_reg = DSPCLINOFF;
- dspsurf_reg = DSPCSURF;
- dspstride_reg = DSPCSTRIDE;
- rect = &dpu_info->damage_pipec;
- }
-
- stride = REG_READ(dspstride_reg);
- /* FIXME: should I do the pipe src update here? */
- REG_WRITE(pipesrc_reg, ((rect->width - 1) << 16) | (rect->height - 1));
- /* Flush plane */
- REG_WRITE(dspsize_reg, ((rect->height - 1) << 16) | (rect->width - 1));
- REG_WRITE(dspoff_reg, ((rect->x * 4) + (rect->y * stride)));
- REG_WRITE(dspsurf_reg, REG_READ(dspsurf_reg));
-
- /*
- * TODO: wait for flip finished and restore the pipesrc reg,
- * or cursor will be show at a wrong position
- */
-}
-
-static void mdfld_dpu_overlay_plane_flush(struct mdfld_dbi_dpu_info *dpu_info,
- mdfld_plane_t plane)
-{
-}
-
-/*
- * TODO: we are still in dbi normal mode now, we will try to use partial
- * mode later.
- */
-static int mdfld_dbi_prepare_cb(struct mdfld_dsi_dbi_output *dbi_output,
- struct mdfld_dbi_dpu_info *dpu_info, int pipe)
-{
- u8 *cb_addr = (u8 *)dbi_output->dbi_cb_addr;
- u32 *index;
- struct psb_drm_dpu_rect *rect = pipe ?
- (&dpu_info->damage_pipec) : (&dpu_info->damage_pipea);
-
- /* FIXME: lock command buffer, this may lead to a deadlock,
- as we already hold the dpu_update_lock */
- if (!spin_trylock(&dbi_output->cb_lock)) {
- DRM_ERROR("lock command buffer failed, try again\n");
- return -EAGAIN;
- }
-
- index = &dbi_output->cb_write;
-
- if (*index) {
- DRM_ERROR("DBI command buffer unclean\n");
- return -EAGAIN;
- }
-
- /* Column address */
- *(cb_addr + ((*index)++)) = set_column_address;
- *(cb_addr + ((*index)++)) = rect->x >> 8;
- *(cb_addr + ((*index)++)) = rect->x;
- *(cb_addr + ((*index)++)) = (rect->x + rect->width - 1) >> 8;
- *(cb_addr + ((*index)++)) = (rect->x + rect->width - 1);
-
- *index = 8;
-
- /* Page address */
- *(cb_addr + ((*index)++)) = set_page_addr;
- *(cb_addr + ((*index)++)) = rect->y >> 8;
- *(cb_addr + ((*index)++)) = rect->y;
- *(cb_addr + ((*index)++)) = (rect->y + rect->height - 1) >> 8;
- *(cb_addr + ((*index)++)) = (rect->y + rect->height - 1);
-
- *index = 16;
-
- /*write memory*/
- *(cb_addr + ((*index)++)) = write_mem_start;
-
- return 0;
-}
-
-static int mdfld_dbi_flush_cb(struct mdfld_dsi_dbi_output *dbi_output, int pipe)
-{
- u32 cmd_phy = dbi_output->dbi_cb_phy;
- u32 *index = &dbi_output->cb_write;
- int reg_offset = pipe ? MIPIC_REG_OFFSET : 0;
- struct drm_device *dev = dbi_output->dev;
-
- if (*index == 0 || !dbi_output)
- return 0;
-
- REG_WRITE((MIPIA_CMD_LEN_REG + reg_offset), 0x010505);
- REG_WRITE((MIPIA_CMD_ADD_REG + reg_offset), cmd_phy | 3);
-
- *index = 0;
-
- /* FIXME: unlock command buffer */
- spin_unlock(&dbi_output->cb_lock);
- return 0;
-}
-
-static int mdfld_dpu_update_pipe(struct mdfld_dsi_dbi_output *dbi_output,
- struct mdfld_dbi_dpu_info *dpu_info, int pipe)
-{
- struct drm_device *dev = dbi_output->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- mdfld_plane_t cursor_plane = MDFLD_CURSORA;
- mdfld_plane_t fb_plane = MDFLD_PLANEA;
- mdfld_plane_t overlay_plane = MDFLD_OVERLAYA;
- int ret = 0;
- u32 plane_mask = MDFLD_PIPEA_PLANE_MASK;
-
- /* Damaged rects on this pipe */
- if (pipe) {
- cursor_plane = MDFLD_CURSORC;
- fb_plane = MDFLD_PLANEC;
- overlay_plane = MDFLD_OVERLAYC;
- plane_mask = MDFLD_PIPEC_PLANE_MASK;
- }
-
- /*update cursor which assigned to @pipe*/
- if (dpu_info->pending & (1 << cursor_plane))
- mdfld_dpu_cursor_plane_flush(dpu_info, cursor_plane);
-
- /*update fb which assigned to @pipe*/
- if (dpu_info->pending & (1 << fb_plane))
- mdfld_dpu_fb_plane_flush(dpu_info, fb_plane);
-
- /* TODO: update overlay */
- if (dpu_info->pending & (1 << overlay_plane))
- mdfld_dpu_overlay_plane_flush(dpu_info, overlay_plane);
-
- /* Flush damage area to panel fb */
- if (dpu_info->pending & plane_mask) {
- ret = mdfld_dbi_prepare_cb(dbi_output, dpu_info, pipe);
- /*
- * TODO: remove b_dsr_enable later,
- * added it so that text console could boot smoothly
- */
- /* Clean pending flags on this pipe */
- if (!ret && dev_priv->dsr_enable) {
- dpu_info->pending &= ~plane_mask;
- /* Reset overlay pipe damage rect */
- mdfld_dpu_init_damage(dpu_info, pipe);
- }
- }
- return ret;
-}
-
-static int mdfld_dpu_update_fb(struct drm_device *dev)
-{
- struct drm_crtc *crtc;
- struct psb_intel_crtc *psb_crtc;
- struct mdfld_dsi_dbi_output **dbi_output;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info;
- bool pipe_updated[2];
- unsigned long irq_flags;
- u32 dpll_reg = MRST_DPLL_A;
- u32 dspcntr_reg = DSPACNTR;
- u32 pipeconf_reg = PIPEACONF;
- u32 dsplinoff_reg = DSPALINOFF;
- u32 dspsurf_reg = DSPASURF;
- u32 mipi_state_reg = MIPIA_INTR_STAT_REG;
- u32 reg_offset = 0;
- int pipe;
- int i;
- int ret;
-
- dbi_output = dpu_info->dbi_outputs;
- pipe_updated[0] = pipe_updated[1] = false;
-
- if (!gma_power_begin(dev, true))
- return -EAGAIN;
-
- /* Try to prevent any new damage reports */
- if (!spin_trylock_irqsave(&dpu_info->dpu_update_lock, irq_flags))
- return -EAGAIN;
-
- for (i = 0; i < dpu_info->dbi_output_num; i++) {
- crtc = dbi_output[i]->base.base.crtc;
- psb_crtc = (crtc) ? to_psb_intel_crtc(crtc) : NULL;
-
- pipe = dbi_output[i]->channel_num ? 2 : 0;
-
- if (pipe == 2) {
- dspcntr_reg = DSPCCNTR;
- pipeconf_reg = PIPECCONF;
- dsplinoff_reg = DSPCLINOFF;
- dspsurf_reg = DSPCSURF;
- reg_offset = MIPIC_REG_OFFSET;
- }
-
- if (!(REG_READ((MIPIA_GEN_FIFO_STAT_REG + reg_offset))
- & (1 << 27)) ||
- !(REG_READ(dpll_reg) & DPLL_VCO_ENABLE) ||
- !(REG_READ(dspcntr_reg) & DISPLAY_PLANE_ENABLE) ||
- !(REG_READ(pipeconf_reg) & DISPLAY_PLANE_ENABLE)) {
- dev_err(dev->dev,
- "DBI FIFO is busy, DSI %d state %x\n",
- pipe,
- REG_READ(mipi_state_reg + reg_offset));
- continue;
- }
-
- /*
- * If DBI output is in a exclusive state then the pipe
- * change won't be updated
- */
- if (dbi_output[i]->dbi_panel_on &&
- !(dbi_output[i]->mode_flags & MODE_SETTING_ON_GOING) &&
- !(psb_crtc &&
- psb_crtc->mode_flags & MODE_SETTING_ON_GOING) &&
- !(dbi_output[i]->mode_flags & MODE_SETTING_IN_DSR)) {
- ret = mdfld_dpu_update_pipe(dbi_output[i],
- dpu_info, dbi_output[i]->channel_num ? 2 : 0);
- if (!ret)
- pipe_updated[i] = true;
- }
- }
-
- for (i = 0; i < dpu_info->dbi_output_num; i++)
- if (pipe_updated[i])
- mdfld_dbi_flush_cb(dbi_output[i],
- dbi_output[i]->channel_num ? 2 : 0);
-
- spin_unlock_irqrestore(&dpu_info->dpu_update_lock, irq_flags);
- gma_power_end(dev);
- return 0;
-}
-
-static int __mdfld_dbi_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output,
- int pipe)
-{
- struct drm_device *dev = dbi_output->dev;
- struct drm_crtc *crtc = dbi_output->base.base.crtc;
- struct psb_intel_crtc *psb_crtc = (crtc) ? to_psb_intel_crtc(crtc)
- : NULL;
- u32 reg_val;
- u32 dpll_reg = MRST_DPLL_A;
- u32 pipeconf_reg = PIPEACONF;
- u32 dspcntr_reg = DSPACNTR;
- u32 dspbase_reg = DSPABASE;
- u32 dspsurf_reg = DSPASURF;
- u32 reg_offset = 0;
-
- if (!dbi_output)
- return 0;
-
- /* If mode setting on-going, back off */
- if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) ||
- (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING))
- return -EAGAIN;
-
- if (pipe == 2) {
- dpll_reg = MRST_DPLL_A;
- pipeconf_reg = PIPECCONF;
- dspcntr_reg = DSPCCNTR;
- dspbase_reg = MDFLD_DSPCBASE;
- dspsurf_reg = DSPCSURF;
-
- reg_offset = MIPIC_REG_OFFSET;
- }
-
- if (!gma_power_begin(dev, true))
- return -EAGAIN;
-
- /* Enable DPLL */
- reg_val = REG_READ(dpll_reg);
- if (!(reg_val & DPLL_VCO_ENABLE)) {
-
- if (reg_val & MDFLD_PWR_GATE_EN) {
- reg_val &= ~MDFLD_PWR_GATE_EN;
- REG_WRITE(dpll_reg, reg_val);
- REG_READ(dpll_reg);
- udelay(500);
- }
-
- reg_val |= DPLL_VCO_ENABLE;
- REG_WRITE(dpll_reg, reg_val);
- REG_READ(dpll_reg);
- udelay(500);
-
- /* FIXME: add timeout */
- while (!(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK))
- cpu_relax();
- }
-
- /* Enable pipe */
- reg_val = REG_READ(pipeconf_reg);
- if (!(reg_val & PIPEACONF_ENABLE)) {
- reg_val |= PIPEACONF_ENABLE;
- REG_WRITE(pipeconf_reg, reg_val);
- REG_READ(pipeconf_reg);
- udelay(500);
- mdfldWaitForPipeEnable(dev, pipe);
- }
-
- /* Enable plane */
- reg_val = REG_READ(dspcntr_reg);
- if (!(reg_val & DISPLAY_PLANE_ENABLE)) {
- reg_val |= DISPLAY_PLANE_ENABLE;
- REG_WRITE(dspcntr_reg, reg_val);
- REG_READ(dspcntr_reg);
- udelay(500);
- }
-
- gma_power_end(dev);
-
- /* Clean IN_DSR flag */
- dbi_output->mode_flags &= ~MODE_SETTING_IN_DSR;
-
- return 0;
-}
-
-int mdfld_dpu_exit_dsr(struct drm_device *dev)
-{
- struct mdfld_dsi_dbi_output **dbi_output;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info;
- int i;
- int pipe;
-
- dbi_output = dpu_info->dbi_outputs;
-
- for (i = 0; i < dpu_info->dbi_output_num; i++) {
- /* If this output is not in DSR mode, don't call exit dsr */
- if (dbi_output[i]->mode_flags & MODE_SETTING_IN_DSR)
- __mdfld_dbi_exit_dsr(dbi_output[i],
- dbi_output[i]->channel_num ? 2 : 0);
- }
-
- /* Enable TE interrupt */
- for (i = 0; i < dpu_info->dbi_output_num; i++) {
- /* If this output is not in DSR mode, don't call exit dsr */
- pipe = dbi_output[i]->channel_num ? 2 : 0;
- if (dbi_output[i]->dbi_panel_on && pipe) {
- mdfld_disable_te(dev, 0);
- mdfld_enable_te(dev, 2);
- } else if (dbi_output[i]->dbi_panel_on && !pipe) {
- mdfld_disable_te(dev, 2);
- mdfld_enable_te(dev, 0);
- }
- }
- return 0;
-}
-
-static int mdfld_dpu_enter_dsr(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info;
- struct mdfld_dsi_dbi_output **dbi_output;
- int i;
-
- dbi_output = dpu_info->dbi_outputs;
-
- for (i = 0; i < dpu_info->dbi_output_num; i++) {
- /* If output is off or already in DSR state, don't re-enter */
- if (dbi_output[i]->dbi_panel_on &&
- !(dbi_output[i]->mode_flags & MODE_SETTING_IN_DSR)) {
- mdfld_dsi_dbi_enter_dsr(dbi_output[i],
- dbi_output[i]->channel_num ? 2 : 0);
- }
- }
-
- return 0;
-}
-
-static void mdfld_dbi_dpu_timer_func(unsigned long data)
-{
- struct drm_device *dev = (struct drm_device *)data;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info;
- struct timer_list *dpu_timer = &dpu_info->dpu_timer;
- unsigned long flags;
-
- if (dpu_info->pending) {
- dpu_info->idle_count = 0;
- /* Update panel fb with damaged area */
- mdfld_dpu_update_fb(dev);
- } else {
- dpu_info->idle_count++;
- }
-
- if (dpu_info->idle_count >= MDFLD_MAX_IDLE_COUNT) {
- mdfld_dpu_enter_dsr(dev);
- /* Stop timer by return */
- return;
- }
-
- spin_lock_irqsave(&dpu_info->dpu_timer_lock, flags);
- if (!timer_pending(dpu_timer)) {
- dpu_timer->expires = jiffies + MDFLD_DSR_DELAY;
- add_timer(dpu_timer);
- }
- spin_unlock_irqrestore(&dpu_info->dpu_timer_lock, flags);
-}
-
-void mdfld_dpu_update_panel(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info;
-
- if (dpu_info->pending) {
- dpu_info->idle_count = 0;
-
- /*update panel fb with damaged area*/
- mdfld_dpu_update_fb(dev);
- } else {
- dpu_info->idle_count++;
- }
-
- if (dpu_info->idle_count >= MDFLD_MAX_IDLE_COUNT) {
- /*enter dsr*/
- mdfld_dpu_enter_dsr(dev);
- }
-}
-
-static int mdfld_dbi_dpu_timer_init(struct drm_device *dev,
- struct mdfld_dbi_dpu_info *dpu_info)
-{
- struct timer_list *dpu_timer = &dpu_info->dpu_timer;
- unsigned long flags;
-
- spin_lock_init(&dpu_info->dpu_timer_lock);
- spin_lock_irqsave(&dpu_info->dpu_timer_lock, flags);
-
- init_timer(dpu_timer);
-
- dpu_timer->data = (unsigned long)dev;
- dpu_timer->function = mdfld_dbi_dpu_timer_func;
- dpu_timer->expires = jiffies + MDFLD_DSR_DELAY;
-
- spin_unlock_irqrestore(&dpu_info->dpu_timer_lock, flags);
-
- return 0;
-}
-
-void mdfld_dbi_dpu_timer_start(struct mdfld_dbi_dpu_info *dpu_info)
-{
- struct timer_list *dpu_timer = &dpu_info->dpu_timer;
- unsigned long flags;
-
- spin_lock_irqsave(&dpu_info->dpu_timer_lock, flags);
- if (!timer_pending(dpu_timer)) {
- dpu_timer->expires = jiffies + MDFLD_DSR_DELAY;
- add_timer(dpu_timer);
- }
- spin_unlock_irqrestore(&dpu_info->dpu_timer_lock, flags);
-}
-
-int mdfld_dbi_dpu_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info;
-
- if (!dpu_info || IS_ERR(dpu_info)) {
- dpu_info = kzalloc(sizeof(struct mdfld_dbi_dpu_info),
- GFP_KERNEL);
- if (!dpu_info) {
- DRM_ERROR("No memory\n");
- return -ENOMEM;
- }
- dev_priv->dbi_dpu_info = dpu_info;
- }
-
- dpu_info->dev = dev;
-
- dpu_info->cursors[0].size = MDFLD_CURSOR_SIZE;
- dpu_info->cursors[1].size = MDFLD_CURSOR_SIZE;
-
- /*init dpu_update_lock*/
- spin_lock_init(&dpu_info->dpu_update_lock);
-
- /*init dpu refresh timer*/
- mdfld_dbi_dpu_timer_init(dev, dpu_info);
-
- /*init pipe damage area*/
- mdfld_dpu_init_damage(dpu_info, 0);
- mdfld_dpu_init_damage(dpu_info, 2);
-
- return 0;
-}
-
-void mdfld_dbi_dpu_exit(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info;
-
- if (!dpu_info)
- return;
-
- del_timer_sync(&dpu_info->dpu_timer);
- kfree(dpu_info);
- dev_priv->dbi_dpu_info = NULL;
-}
-
-
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * jim liu <jim.liu@intel.com>
- * Jackie Li<yaodong.li@intel.com>
- */
-
-#ifndef __MDFLD_DSI_DBI_DPU_H__
-#define __MDFLD_DSI_DBI_DPU_H__
-
-#include "mdfld_dsi_dbi.h"
-
-typedef enum {
- MDFLD_PLANEA,
- MDFLD_PLANEC,
- MDFLD_CURSORA,
- MDFLD_CURSORC,
- MDFLD_OVERLAYA,
- MDFLD_OVERLAYC,
- MDFLD_PLANE_NUM,
-} mdfld_plane_t;
-
-#define MDFLD_PIPEA_PLANE_MASK 0x15
-#define MDFLD_PIPEC_PLANE_MASK 0x2A
-
-struct mdfld_cursor_info {
- int x, y;
- int size;
-};
-
-#define MDFLD_CURSOR_SIZE 64
-
-/*
- * enter DSR mode if screen has no update for 2 frames.
- */
-#define MDFLD_MAX_IDLE_COUNT 2
-
-struct mdfld_dbi_dpu_info {
- struct drm_device *dev;
- /* Lock */
- spinlock_t dpu_update_lock;
-
- /* Cursor postion */
- struct mdfld_cursor_info cursors[2];
-
- /* Damaged area for each plane */
- struct psb_drm_dpu_rect damaged_rects[MDFLD_PLANE_NUM];
-
- /* Final damaged area */
- struct psb_drm_dpu_rect damage_pipea;
- struct psb_drm_dpu_rect damage_pipec;
-
- /* Pending */
- u32 pending;
-
- /* DPU timer */
- struct timer_list dpu_timer;
- spinlock_t dpu_timer_lock;
-
- /* DPU idle count */
- u32 idle_count;
-
- /* DSI outputs */
- struct mdfld_dsi_dbi_output *dbi_outputs[2];
- int dbi_output_num;
-};
-
-static inline int mdfld_dpu_region_extent(struct psb_drm_dpu_rect *origin,
- struct psb_drm_dpu_rect *rect)
-{
- int x1, y1, x2, y2;
-
- x1 = origin->x + origin->width;
- y1 = origin->y + origin->height;
-
- x2 = rect->x + rect->width;
- y2 = rect->y + rect->height;
-
- origin->x = min(origin->x, rect->x);
- origin->y = min(origin->y, rect->y);
- origin->width = max(x1, x2) - origin->x;
- origin->height = max(y1, y2) - origin->y;
-
- return 0;
-}
-
-static inline void mdfld_check_boundary(struct mdfld_dbi_dpu_info *dpu_info,
- struct psb_drm_dpu_rect *rect)
-{
- if (rect->x < 0)
- rect->x = 0;
- if (rect->y < 0)
- rect->y = 0;
-
- if (rect->x + rect->width > 864)
- rect->width = 864 - rect->x;
- if (rect->y + rect->height > 480)
- rect->height = 480 - rect->height;
-
- if (!rect->width)
- rect->width = 1;
- if (!rect->height)
- rect->height = 1;
-}
-
-static inline void mdfld_dpu_init_damage(struct mdfld_dbi_dpu_info *dpu_info,
- int pipe)
-{
- struct psb_drm_dpu_rect *rect;
-
- if (pipe == 0)
- rect = &dpu_info->damage_pipea;
- else
- rect = &dpu_info->damage_pipec;
-
- rect->x = 864;
- rect->y = 480;
- rect->width = -864;
- rect->height = -480;
-}
-
-extern int mdfld_dsi_dbi_dsr_off(struct drm_device *dev,
- struct psb_drm_dpu_rect *rect);
-extern int mdfld_dbi_dpu_report_damage(struct drm_device *dev,
- mdfld_plane_t plane,
- struct psb_drm_dpu_rect *rect);
-extern int mdfld_dbi_dpu_report_fullscreen_damage(struct drm_device *dev);
-extern int mdfld_dpu_exit_dsr(struct drm_device *dev);
-extern void mdfld_dbi_dpu_timer_start(struct mdfld_dbi_dpu_info *dpu_info);
-extern int mdfld_dbi_dpu_init(struct drm_device *dev);
-extern void mdfld_dbi_dpu_exit(struct drm_device *dev);
-extern void mdfld_dpu_update_panel(struct drm_device *dev);
-
-#endif /*__MDFLD_DSI_DBI_DPU_H__*/
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * jim liu <jim.liu@intel.com>
- * Jackie Li<yaodong.li@intel.com>
- */
-
-#include "mdfld_dsi_dpi.h"
-#include "mdfld_output.h"
-#include "mdfld_dsi_pkg_sender.h"
-
-
-static void mdfld_wait_for_HS_DATA_FIFO(struct drm_device *dev, u32 pipe)
-{
- u32 gen_fifo_stat_reg = MIPIA_GEN_FIFO_STAT_REG;
- int timeout = 0;
-
- if (pipe == 2)
- gen_fifo_stat_reg += MIPIC_REG_OFFSET;
-
- udelay(500);
-
- /* This will time out after approximately 2+ seconds */
- while ((timeout < 20000) && (REG_READ(gen_fifo_stat_reg) & DSI_FIFO_GEN_HS_DATA_FULL)) {
- udelay(100);
- timeout++;
- }
-
- if (timeout == 20000)
- dev_warn(dev->dev, "MIPI: HS Data FIFO was never cleared!\n");
-}
-
-static void mdfld_wait_for_HS_CTRL_FIFO(struct drm_device *dev, u32 pipe)
-{
- u32 gen_fifo_stat_reg = MIPIA_GEN_FIFO_STAT_REG;
- int timeout = 0;
-
- if (pipe == 2)
- gen_fifo_stat_reg += MIPIC_REG_OFFSET;
-
- udelay(500);
-
- /* This will time out after approximately 2+ seconds */
- while ((timeout < 20000) && (REG_READ(gen_fifo_stat_reg) & DSI_FIFO_GEN_HS_CTRL_FULL)) {
- udelay(100);
- timeout++;
- }
- if (timeout == 20000)
- dev_warn(dev->dev, "MIPI: HS CMD FIFO was never cleared!\n");
-}
-
-static void mdfld_wait_for_DPI_CTRL_FIFO(struct drm_device *dev, u32 pipe)
-{
- u32 gen_fifo_stat_reg = MIPIA_GEN_FIFO_STAT_REG;
- int timeout = 0;
-
- if (pipe == 2)
- gen_fifo_stat_reg += MIPIC_REG_OFFSET;
-
- udelay(500);
-
- /* This will time out after approximately 2+ seconds */
- while ((timeout < 20000) && ((REG_READ(gen_fifo_stat_reg) & DPI_FIFO_EMPTY)
- != DPI_FIFO_EMPTY)) {
- udelay(100);
- timeout++;
- }
-
- if (timeout == 20000)
- dev_warn(dev->dev, "MIPI: DPI FIFO was never cleared!\n");
-}
-
-static void mdfld_wait_for_SPL_PKG_SENT(struct drm_device *dev, u32 pipe)
-{
- u32 intr_stat_reg = MIPIA_INTR_STAT_REG;
- int timeout = 0;
-
- if (pipe == 2)
- intr_stat_reg += MIPIC_REG_OFFSET;
-
- udelay(500);
-
- /* This will time out after approximately 2+ seconds */
- while ((timeout < 20000) && (!(REG_READ(intr_stat_reg) & DSI_INTR_STATE_SPL_PKG_SENT))) {
- udelay(100);
- timeout++;
- }
-
- if (timeout == 20000)
- dev_warn(dev->dev, "MIPI: SPL_PKT_SENT_INTERRUPT was not sent successfully!\n");
-}
-
-
-/* ************************************************************************* *\
- * FUNCTION: mdfld_dsi_tpo_ic_init
- *
- * DESCRIPTION: This function is called only by mrst_dsi_mode_set and
- * restore_display_registers. since this function does not
- * acquire the mutex, it is important that the calling function
- * does!
-\* ************************************************************************* */
-void mdfld_dsi_tpo_ic_init(struct mdfld_dsi_config *dsi_config, u32 pipe)
-{
- struct drm_device *dev = dsi_config->dev;
- u32 dcsChannelNumber = dsi_config->channel_num;
- u32 gen_data_reg = MIPIA_HS_GEN_DATA_REG;
- u32 gen_ctrl_reg = MIPIA_HS_GEN_CTRL_REG;
- u32 gen_ctrl_val = GEN_LONG_WRITE;
-
- if (pipe == 2) {
- gen_data_reg = HS_GEN_DATA_REG + MIPIC_REG_OFFSET;
- gen_ctrl_reg = HS_GEN_CTRL_REG + MIPIC_REG_OFFSET;
- }
-
- gen_ctrl_val |= dcsChannelNumber << DCS_CHANNEL_NUMBER_POS;
-
- /* Flip page order */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x00008036);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x02 << WORD_COUNTS_POS));
-
- /* 0xF0 */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x005a5af0);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x03 << WORD_COUNTS_POS));
-
- /* Write protection key */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x005a5af1);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x03 << WORD_COUNTS_POS));
-
- /* 0xFC */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x005a5afc);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x03 << WORD_COUNTS_POS));
-
- /* 0xB7 */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x770000b7);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x00000044);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x05 << WORD_COUNTS_POS));
-
- /* 0xB6 */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x000a0ab6);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x03 << WORD_COUNTS_POS));
-
- /* 0xF2 */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x081010f2);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x4a070708);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x000000c5);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x09 << WORD_COUNTS_POS));
-
- /* 0xF8 */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x024003f8);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x01030a04);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x0e020220);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x00000004);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x0d << WORD_COUNTS_POS));
-
- /* 0xE2 */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x398fc3e2);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x0000916f);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x06 << WORD_COUNTS_POS));
-
- /* 0xB0 */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x000000b0);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x02 << WORD_COUNTS_POS));
-
- /* 0xF4 */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x240242f4);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x78ee2002);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x2a071050);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x507fee10);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x10300710);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x14 << WORD_COUNTS_POS));
-
- /* 0xBA */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x19fe07ba);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x101c0a31);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x00000010);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x09 << WORD_COUNTS_POS));
-
- /* 0xBB */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x28ff07bb);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x24280a31);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x00000034);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x09 << WORD_COUNTS_POS));
-
- /* 0xFB */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x535d05fb);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x1b1a2130);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x221e180e);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x131d2120);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x535d0508);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x1c1a2131);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x231f160d);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x111b2220);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x535c2008);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x1f1d2433);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x2c251a10);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x2c34372d);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x00000023);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x31 << WORD_COUNTS_POS));
-
- /* 0xFA */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x525c0bfa);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x1c1c232f);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x2623190e);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x18212625);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x545d0d0e);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x1e1d2333);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x26231a10);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x1a222725);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x545d280f);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x21202635);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x31292013);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x31393d33);
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x00000029);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x31 << WORD_COUNTS_POS));
-
- /* Set DM */
- mdfld_wait_for_HS_DATA_FIFO(dev, pipe);
- REG_WRITE(gen_data_reg, 0x000100f7);
- mdfld_wait_for_HS_CTRL_FIFO(dev, pipe);
- REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x03 << WORD_COUNTS_POS));
-}
-
-static u16 mdfld_dsi_dpi_to_byte_clock_count(int pixel_clock_count,
- int num_lane, int bpp)
-{
- return (u16)((pixel_clock_count * bpp) / (num_lane * 8));
-}
-
-/*
- * Calculate the dpi time basing on a given drm mode @mode
- * return 0 on success.
- * FIXME: I was using proposed mode value for calculation, may need to
- * use crtc mode values later
- */
-int mdfld_dsi_dpi_timing_calculation(struct drm_display_mode *mode,
- struct mdfld_dsi_dpi_timing *dpi_timing,
- int num_lane, int bpp)
-{
- int pclk_hsync, pclk_hfp, pclk_hbp, pclk_hactive;
- int pclk_vsync, pclk_vfp, pclk_vbp, pclk_vactive;
-
- if(!mode || !dpi_timing) {
- DRM_ERROR("Invalid parameter\n");
- return -EINVAL;
- }
-
- pclk_hactive = mode->hdisplay;
- pclk_hfp = mode->hsync_start - mode->hdisplay;
- pclk_hsync = mode->hsync_end - mode->hsync_start;
- pclk_hbp = mode->htotal - mode->hsync_end;
-
- pclk_vactive = mode->vdisplay;
- pclk_vfp = mode->vsync_start - mode->vdisplay;
- pclk_vsync = mode->vsync_end - mode->vsync_start;
- pclk_vbp = mode->vtotal - mode->vsync_end;
-
- /*
- * byte clock counts were calculated by following formula
- * bclock_count = pclk_count * bpp / num_lane / 8
- */
- dpi_timing->hsync_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_hsync, num_lane, bpp);
- dpi_timing->hbp_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_hbp, num_lane, bpp);
- dpi_timing->hfp_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_hfp, num_lane, bpp);
- dpi_timing->hactive_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_hactive, num_lane, bpp);
- dpi_timing->vsync_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_vsync, num_lane, bpp);
- dpi_timing->vbp_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_vbp, num_lane, bpp);
- dpi_timing->vfp_count = mdfld_dsi_dpi_to_byte_clock_count(pclk_vfp, num_lane, bpp);
-
- return 0;
-}
-
-void mdfld_dsi_dpi_controller_init(struct mdfld_dsi_config *dsi_config, int pipe)
-{
- struct drm_device *dev = dsi_config->dev;
- u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0;
- int lane_count = dsi_config->lane_count;
- struct mdfld_dsi_dpi_timing dpi_timing;
- struct drm_display_mode *mode = dsi_config->mode;
- u32 val = 0;
-
- /*un-ready device*/
- REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000);
-
- /*init dsi adapter before kicking off*/
- REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018);
-
- /*enable all interrupts*/
- REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff);
-
-
- /*set up func_prg*/
- val |= lane_count;
- val |= dsi_config->channel_num << DSI_DPI_VIRT_CHANNEL_OFFSET;
-
- switch(dsi_config->bpp) {
- case 16:
- val |= DSI_DPI_COLOR_FORMAT_RGB565;
- break;
- case 18:
- val |= DSI_DPI_COLOR_FORMAT_RGB666;
- break;
- case 24:
- val |= DSI_DPI_COLOR_FORMAT_RGB888;
- break;
- default:
- DRM_ERROR("unsupported color format, bpp = %d\n", dsi_config->bpp);
- }
- REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val);
-
- REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset),
- (mode->vtotal * mode->htotal * dsi_config->bpp / (8 * lane_count)) & DSI_HS_TX_TIMEOUT_MASK);
- REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff & DSI_LP_RX_TIMEOUT_MASK);
-
- /*max value: 20 clock cycles of txclkesc*/
- REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x14 & DSI_TURN_AROUND_TIMEOUT_MASK);
-
- /*min 21 txclkesc, max: ffffh*/
- REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0xffff & DSI_RESET_TIMER_MASK);
-
- REG_WRITE((MIPIA_DPI_RESOLUTION_REG + reg_offset), mode->vdisplay << 16 | mode->hdisplay);
-
- /*set DPI timing registers*/
- mdfld_dsi_dpi_timing_calculation(mode, &dpi_timing, dsi_config->lane_count, dsi_config->bpp);
-
- REG_WRITE((MIPIA_HSYNC_COUNT_REG + reg_offset), dpi_timing.hsync_count & DSI_DPI_TIMING_MASK);
- REG_WRITE((MIPIA_HBP_COUNT_REG + reg_offset), dpi_timing.hbp_count & DSI_DPI_TIMING_MASK);
- REG_WRITE((MIPIA_HFP_COUNT_REG + reg_offset), dpi_timing.hfp_count & DSI_DPI_TIMING_MASK);
- REG_WRITE((MIPIA_HACTIVE_COUNT_REG + reg_offset), dpi_timing.hactive_count & DSI_DPI_TIMING_MASK);
- REG_WRITE((MIPIA_VSYNC_COUNT_REG + reg_offset), dpi_timing.vsync_count & DSI_DPI_TIMING_MASK);
- REG_WRITE((MIPIA_VBP_COUNT_REG + reg_offset), dpi_timing.vbp_count & DSI_DPI_TIMING_MASK);
- REG_WRITE((MIPIA_VFP_COUNT_REG + reg_offset), dpi_timing.vfp_count & DSI_DPI_TIMING_MASK);
-
- REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46);
-
- /*min: 7d0 max: 4e20*/
- REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x000007d0);
-
- /*set up video mode*/
- val = 0;
- val = dsi_config->video_mode | DSI_DPI_COMPLETE_LAST_LINE;
- REG_WRITE((MIPIA_VIDEO_MODE_FORMAT_REG + reg_offset), val);
-
- REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000000);
-
- REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004);
-
- /*TODO: figure out how to setup these registers*/
- REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408);
-
- REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), (0xa << 16) | 0x14);
- /*set device ready*/
- REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001);
-}
-
-void mdfld_dsi_dpi_turn_on(struct mdfld_dsi_dpi_output *output, int pipe)
-{
- struct drm_device *dev = output->dev;
- u32 reg_offset = 0;
-
- if(output->panel_on)
- return;
-
- if(pipe)
- reg_offset = MIPIC_REG_OFFSET;
-
- /* clear special packet sent bit */
- if(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT) {
- REG_WRITE((MIPIA_INTR_STAT_REG + reg_offset), DSI_INTR_STATE_SPL_PKG_SENT);
- }
-
- /*send turn on package*/
- REG_WRITE((MIPIA_DPI_CONTROL_REG + reg_offset), DSI_DPI_CTRL_HS_TURN_ON);
-
- /*wait for SPL_PKG_SENT interrupt*/
- mdfld_wait_for_SPL_PKG_SENT(dev, pipe);
-
- if(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT) {
- REG_WRITE((MIPIA_INTR_STAT_REG + reg_offset), DSI_INTR_STATE_SPL_PKG_SENT);
- }
-
- output->panel_on = 1;
-
- /* FIXME the following is disabled to WA the X slow start issue for TMD panel */
- /* if(pipe == 2) */
- /* dev_priv->dpi_panel_on2 = true; */
- /* else if (pipe == 0) */
- /* dev_priv->dpi_panel_on = true; */
-}
-
-static void mdfld_dsi_dpi_shut_down(struct mdfld_dsi_dpi_output *output, int pipe)
-{
- struct drm_device *dev = output->dev;
- u32 reg_offset = 0;
-
- /*if output is on, or mode setting didn't happen, ignore this*/
- if((!output->panel_on) || output->first_boot) {
- output->first_boot = 0;
- return;
- }
-
- if(pipe)
- reg_offset = MIPIC_REG_OFFSET;
-
- /* Wait for dpi fifo to empty */
- mdfld_wait_for_DPI_CTRL_FIFO(dev, pipe);
-
- /* Clear the special packet interrupt bit if set */
- if(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT) {
- REG_WRITE((MIPIA_INTR_STAT_REG + reg_offset), DSI_INTR_STATE_SPL_PKG_SENT);
- }
-
- if(REG_READ(MIPIA_DPI_CONTROL_REG + reg_offset) == DSI_DPI_CTRL_HS_SHUTDOWN) {
- dev_warn(dev->dev, "try to send the same package again, abort!");
- goto shutdown_out;
- }
-
- REG_WRITE((MIPIA_DPI_CONTROL_REG + reg_offset), DSI_DPI_CTRL_HS_SHUTDOWN);
-
-shutdown_out:
- output->panel_on = 0;
- output->first_boot = 0;
-
- /* FIXME the following is disabled to WA the X slow start issue for TMD panel */
- /* if(pipe == 2) */
- /* dev_priv->dpi_panel_on2 = false; */
- /* else if (pipe == 0) */
- /* dev_priv->dpi_panel_on = false; */
- /* #ifdef CONFIG_PM_RUNTIME*/
- /* if (drm_psb_ospm && !enable_gfx_rtpm) { */
- /* pm_runtime_allow(&gpDrmDevice->pdev->dev); */
- /* schedule_delayed_work(&dev_priv->rtpm_work, 30 * 1000); */
- /* } */
- /*if (enable_gfx_rtpm) */
- /* pm_schedule_suspend(&dev->pdev->dev, gfxrtdelay); */
- /* #endif */
-}
-
-void mdfld_dsi_dpi_set_power(struct drm_encoder *encoder, bool on)
-{
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_dpi_output *dpi_output = MDFLD_DSI_DPI_OUTPUT(dsi_encoder);
- struct mdfld_dsi_config *dsi_config = mdfld_dsi_encoder_get_config(dsi_encoder);
- int pipe = mdfld_dsi_encoder_get_pipe(dsi_encoder);
- struct drm_device *dev = dsi_config->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 mipi_reg = MIPI;
- u32 pipeconf_reg = PIPEACONF;
-
- if(pipe) {
- mipi_reg = MIPI_C;
- pipeconf_reg = PIPECCONF;
- }
-
- /* Start up display island if it was shutdown */
- if (!gma_power_begin(dev, true))
- return;
-
- if(on) {
- if (mdfld_get_panel_type(dev, pipe) == TMD_VID){
- mdfld_dsi_dpi_turn_on(dpi_output, pipe);
- } else {
- /* Enable mipi port */
- REG_WRITE(mipi_reg, (REG_READ(mipi_reg) | (1 << 31)));
- REG_READ(mipi_reg);
-
- mdfld_dsi_dpi_turn_on(dpi_output, pipe);
- mdfld_dsi_tpo_ic_init(dsi_config, pipe);
- }
-
- if(pipe == 2) {
- dev_priv->dpi_panel_on2 = true;
- }
- else {
- dev_priv->dpi_panel_on = true;
- }
-
- } else {
- if (mdfld_get_panel_type(dev, pipe) == TMD_VID) {
- mdfld_dsi_dpi_shut_down(dpi_output, pipe);
- } else {
- mdfld_dsi_dpi_shut_down(dpi_output, pipe);
- /* Disable mipi port */
- REG_WRITE(mipi_reg, (REG_READ(mipi_reg) & ~(1<<31)));
- REG_READ(mipi_reg);
- }
-
- if(pipe == 2)
- dev_priv->dpi_panel_on2 = false;
- else
- dev_priv->dpi_panel_on = false;
- }
- gma_power_end(dev);
-}
-
-void mdfld_dsi_dpi_dpms(struct drm_encoder *encoder, int mode)
-{
- dev_dbg(encoder->dev->dev, "DPMS %s\n",
- (mode == DRM_MODE_DPMS_ON ? "on":"off"));
-
- if (mode == DRM_MODE_DPMS_ON)
- mdfld_dsi_dpi_set_power(encoder, true);
- else {
- mdfld_dsi_dpi_set_power(encoder, false);
-#if 0 /* FIXME */
-#ifdef CONFIG_PM_RUNTIME
- if (enable_gfx_rtpm)
- pm_schedule_suspend(&gpDrmDevice->pdev->dev, gfxrtdelay);
-#endif
-#endif
- }
-}
-
-bool mdfld_dsi_dpi_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_config *dsi_config = mdfld_dsi_encoder_get_config(dsi_encoder);
- struct drm_display_mode *fixed_mode = dsi_config->fixed_mode;
-
- if(fixed_mode) {
- adjusted_mode->hdisplay = fixed_mode->hdisplay;
- adjusted_mode->hsync_start = fixed_mode->hsync_start;
- adjusted_mode->hsync_end = fixed_mode->hsync_end;
- adjusted_mode->htotal = fixed_mode->htotal;
- adjusted_mode->vdisplay = fixed_mode->vdisplay;
- adjusted_mode->vsync_start = fixed_mode->vsync_start;
- adjusted_mode->vsync_end = fixed_mode->vsync_end;
- adjusted_mode->vtotal = fixed_mode->vtotal;
- adjusted_mode->clock = fixed_mode->clock;
- drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
- }
-
- return true;
-}
-
-void mdfld_dsi_dpi_prepare(struct drm_encoder *encoder)
-{
- mdfld_dsi_dpi_set_power(encoder, false);
-}
-
-void mdfld_dsi_dpi_commit(struct drm_encoder *encoder)
-{
- mdfld_dsi_dpi_set_power(encoder, true);
-}
-
-void mdfld_dsi_dpi_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_dpi_output *dpi_output = MDFLD_DSI_DPI_OUTPUT(dsi_encoder);
- struct mdfld_dsi_config *dsi_config = mdfld_dsi_encoder_get_config(dsi_encoder);
- struct drm_device *dev = dsi_config->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- int pipe = mdfld_dsi_encoder_get_pipe(dsi_encoder);
-
- u32 pipeconf_reg = PIPEACONF;
- u32 dspcntr_reg = DSPACNTR;
- u32 mipi_reg = MIPI;
- u32 reg_offset = 0;
-
- u32 pipeconf = dev_priv->pipeconf;
- u32 dspcntr = dev_priv->dspcntr;
- u32 mipi = MIPI_PORT_EN | PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX;
-
- dev_dbg(dev->dev, "set mode %dx%d on pipe %d\n",
- mode->hdisplay, mode->vdisplay, pipe);
-
- if(pipe) {
- pipeconf_reg = PIPECCONF;
- dspcntr_reg = DSPCCNTR;
- mipi_reg = MIPI_C;
- reg_offset = MIPIC_REG_OFFSET;
- } else {
- mipi |= 2;
- }
-
- if (!gma_power_begin(dev, true))
- return;
-
- /* Set up mipi port FIXME: do at init time */
- REG_WRITE(mipi_reg, mipi);
- REG_READ(mipi_reg);
-
- /* Set up DSI controller DPI interface */
- mdfld_dsi_dpi_controller_init(dsi_config, pipe);
-
- if (mdfld_get_panel_type(dev, pipe) != TMD_VID) {
- /* Turn on DPI interface */
- mdfld_dsi_dpi_turn_on(dpi_output, pipe);
- }
-
- /* Set up pipe */
- REG_WRITE(pipeconf_reg, pipeconf);
- REG_READ(pipeconf_reg);
-
- /* Set up display plane */
- REG_WRITE(dspcntr_reg, dspcntr);
- REG_READ(dspcntr_reg);
-
- msleep(20); /* FIXME: this should wait for vblank */
-
- dev_dbg(dev->dev, "State %x, power %d\n",
- REG_READ(MIPIA_INTR_STAT_REG + reg_offset),
- dpi_output->panel_on);
-
- if (mdfld_get_panel_type(dev, pipe) != TMD_VID) {
- /* Init driver ic */
- mdfld_dsi_tpo_ic_init(dsi_config, pipe);
- /* Init backlight */
- mdfld_dsi_brightness_init(dsi_config, pipe);
- }
- gma_power_end(dev);
-}
-
-
-/*
- * Init DSI DPI encoder.
- * Allocate an mdfld_dsi_encoder and attach it to given @dsi_connector
- * return pointer of newly allocated DPI encoder, NULL on error
- */
-struct mdfld_dsi_encoder *mdfld_dsi_dpi_init(struct drm_device *dev,
- struct mdfld_dsi_connector *dsi_connector,
- struct panel_funcs *p_funcs)
-{
- struct mdfld_dsi_dpi_output *dpi_output = NULL;
- struct mdfld_dsi_config *dsi_config;
- struct drm_connector *connector = NULL;
- struct drm_encoder *encoder = NULL;
- struct drm_display_mode *fixed_mode = NULL;
- int pipe;
- u32 data;
- int ret;
-
- if (!dsi_connector || !p_funcs) {
- WARN_ON(1);
- return NULL;
- }
-
- dsi_config = mdfld_dsi_get_config(dsi_connector);
- pipe = dsi_connector->pipe;
-
- /* Panel hard-reset */
- if (p_funcs->reset) {
- ret = p_funcs->reset(pipe);
- if (ret) {
- DRM_ERROR("Panel %d hard-reset failed\n", pipe);
- return NULL;
- }
- }
-
- /* Panel drvIC init */
- if (p_funcs->drv_ic_init)
- p_funcs->drv_ic_init(dsi_config, pipe);
-
- /* Panel power mode detect */
- ret = mdfld_dsi_get_power_mode(dsi_config,
- &data,
- MDFLD_DSI_LP_TRANSMISSION);
- if (ret) {
- DRM_ERROR("Panel %d get power mode failed\n", pipe);
- dsi_connector->status = connector_status_disconnected;
- } else {
- DRM_INFO("pipe %d power mode 0x%x\n", pipe, data);
- dsi_connector->status = connector_status_connected;
- }
-
- dpi_output = kzalloc(sizeof(struct mdfld_dsi_dpi_output), GFP_KERNEL);
- if(!dpi_output) {
- dev_err(dev->dev, "No memory for dsi_dpi_output\n");
- return NULL;
- }
-
- if(dsi_connector->pipe)
- dpi_output->panel_on = 0;
- else
- dpi_output->panel_on = 0;
-
- dpi_output->dev = dev;
- dpi_output->p_funcs = p_funcs;
- dpi_output->first_boot = 1;
-
- /* Get fixed mode */
- dsi_config = mdfld_dsi_get_config(dsi_connector);
- fixed_mode = dsi_config->fixed_mode;
-
- /* Create drm encoder object */
- connector = &dsi_connector->base.base;
- encoder = &dpi_output->base.base;
- /*
- * On existing hardware this will be a panel of some form,
- * if future devices also have HDMI bridges this will need
- * revisiting
- */
- drm_encoder_init(dev,
- encoder,
- p_funcs->encoder_funcs,
- DRM_MODE_ENCODER_LVDS);
- drm_encoder_helper_add(encoder,
- p_funcs->encoder_helper_funcs);
-
- /* Attach to given connector */
- drm_mode_connector_attach_encoder(connector, encoder);
-
- /* Set possible crtcs and clones */
- if(dsi_connector->pipe) {
- encoder->possible_crtcs = (1 << 2);
- encoder->possible_clones = (1 << 1);
- } else {
- encoder->possible_crtcs = (1 << 0);
- encoder->possible_clones = (1 << 0);
- }
- return &dpi_output->base;
-}
-
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * jim liu <jim.liu@intel.com>
- * Jackie Li<yaodong.li@intel.com>
- */
-
-#ifndef __MDFLD_DSI_DPI_H__
-#define __MDFLD_DSI_DPI_H__
-
-#include "mdfld_dsi_output.h"
-#include "mdfld_output.h"
-
-struct mdfld_dsi_dpi_timing {
- u16 hsync_count;
- u16 hbp_count;
- u16 hfp_count;
- u16 hactive_count;
- u16 vsync_count;
- u16 vbp_count;
- u16 vfp_count;
-};
-
-struct mdfld_dsi_dpi_output {
- struct mdfld_dsi_encoder base;
- struct drm_device *dev;
-
- int panel_on;
- int first_boot;
-
- struct panel_funcs *p_funcs;
-};
-
-#define MDFLD_DSI_DPI_OUTPUT(dsi_encoder) \
- container_of(dsi_encoder, struct mdfld_dsi_dpi_output, base)
-
-extern int mdfld_dsi_dpi_timing_calculation(struct drm_display_mode *mode,
- struct mdfld_dsi_dpi_timing *dpi_timing,
- int num_lane, int bpp);
-extern struct mdfld_dsi_encoder *mdfld_dsi_dpi_init(struct drm_device *dev,
- struct mdfld_dsi_connector *dsi_connector,
- struct panel_funcs *p_funcs);
-
-/* Medfield DPI helper functions */
-extern void mdfld_dsi_dpi_dpms(struct drm_encoder *encoder, int mode);
-extern bool mdfld_dsi_dpi_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode);
-extern void mdfld_dsi_dpi_prepare(struct drm_encoder *encoder);
-extern void mdfld_dsi_dpi_commit(struct drm_encoder *encoder);
-extern void mdfld_dsi_dpi_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode);
-extern void mdfld_dsi_dpi_turn_on(struct mdfld_dsi_dpi_output *output,
- int pipe);
-extern void mdfld_dsi_dpi_controller_init(struct mdfld_dsi_config *si_config,
- int pipe);
-#endif /*__MDFLD_DSI_DPI_H__*/
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * jim liu <jim.liu@intel.com>
- * Jackie Li<yaodong.li@intel.com>
- */
-
-#include "mdfld_dsi_output.h"
-#include "mdfld_dsi_dbi.h"
-#include "mdfld_dsi_dpi.h"
-#include "mdfld_output.h"
-#include <asm/intel_scu_ipc.h>
-#include "mdfld_dsi_pkg_sender.h"
-#include <linux/pm_runtime.h>
-#include <linux/moduleparam.h>
-
-#define MDFLD_DSI_BRIGHTNESS_MAX_LEVEL 100
-
-static int CABC_control = 1;
-static int LABC_control = 1;
-
-module_param (CABC_control, int, 0644);
-module_param (LABC_control, int, 0644);
-
-/**
- * make these MCS command global
- * we don't need 'movl' everytime we send them.
- * FIXME: these datas were provided by OEM, we should get them from GCT.
- **/
-static u32 mdfld_dbi_mcs_hysteresis[] = {
- 0x42000f57, 0x8c006400, 0xff00bf00, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x38000aff, 0x82005000, 0xff00ab00, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x000000ff,
-};
-
-static u32 mdfld_dbi_mcs_display_profile[] = {
- 0x50281450, 0x0000c882, 0x00000000, 0x00000000,
- 0x00000000,
-};
-
-static u32 mdfld_dbi_mcs_kbbc_profile[] = {
- 0x00ffcc60, 0x00000000, 0x00000000, 0x00000000,
-};
-
-static u32 mdfld_dbi_mcs_gamma_profile[] = {
- 0x81111158, 0x88888888, 0x88888888,
-};
-
-/*
- * write hysteresis values.
- */
-static void mdfld_dsi_write_hysteresis (struct mdfld_dsi_config *dsi_config,
- int pipe)
-{
- struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config);
-
- if(!sender) {
- WARN_ON(1);
- return;
- }
- mdfld_dsi_send_mcs_long_hs(sender,
- mdfld_dbi_mcs_hysteresis,
- 17,
- MDFLD_DSI_SEND_PACKAGE);
-}
-
-/*
- * write display profile values.
- */
-static void mdfld_dsi_write_display_profile(struct mdfld_dsi_config *dsi_config, int pipe)
-{
- struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config);
-
- if(!sender) {
- WARN_ON(1);
- return;
- }
- mdfld_dsi_send_mcs_long_hs(sender,
- mdfld_dbi_mcs_display_profile,
- 5,
- MDFLD_DSI_SEND_PACKAGE);
-}
-
-/*
- * write KBBC profile values.
- */
-static void mdfld_dsi_write_kbbc_profile (struct mdfld_dsi_config * dsi_config, int pipe)
-{
- struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config);
-
- if(!sender) {
- WARN_ON(1);
- return;
- }
- mdfld_dsi_send_mcs_long_hs(sender,
- mdfld_dbi_mcs_kbbc_profile,
- 4,
- MDFLD_DSI_SEND_PACKAGE);
-}
-
-/*
- * write gamma setting.
- */
-static void mdfld_dsi_write_gamma_setting (struct mdfld_dsi_config *dsi_config, int pipe)
-{
- struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config);
-
- if(!sender) {
- WARN_ON(1);
- return;
- }
- mdfld_dsi_send_mcs_long_hs(sender,
- mdfld_dbi_mcs_gamma_profile,
- 3,
- MDFLD_DSI_SEND_PACKAGE);
-}
-
-/*
- * Check and see if the generic control or data buffer is empty and ready.
- */
-void mdfld_dsi_gen_fifo_ready (struct drm_device *dev, u32 gen_fifo_stat_reg, u32 fifo_stat)
-{
- u32 GEN_BF_time_out_count = 0;
-
- /* Check MIPI Adatper command registers */
- for (GEN_BF_time_out_count = 0; GEN_BF_time_out_count < GEN_FB_TIME_OUT; GEN_BF_time_out_count++)
- {
- if ((REG_READ(gen_fifo_stat_reg) & fifo_stat) == fifo_stat)
- break;
- udelay (100);
- }
-
- if (GEN_BF_time_out_count == GEN_FB_TIME_OUT)
- dev_err(dev->dev,
- "mdfld_dsi_gen_fifo_ready, Timeout. gen_fifo_stat_reg = 0x%x. \n",
- gen_fifo_stat_reg);
-}
-
-/*
- * Manage the DSI MIPI keyboard and display brightness.
- * FIXME: this is exported to OSPM code. should work out an specific
- * display interface to OSPM.
- */
-void mdfld_dsi_brightness_init(struct mdfld_dsi_config *dsi_config, int pipe)
-{
- struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config);
- struct drm_device *dev = sender->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 gen_ctrl_val;
-
- if(!sender) {
- WARN_ON(1);
- return;
- }
- /* Set default display backlight value to 85% (0xd8)*/
- mdfld_dsi_send_mcs_short_hs(sender,
- write_display_brightness,
- 0xd8,
- 1,
- MDFLD_DSI_SEND_PACKAGE);
-
- /* Set minimum brightness setting of CABC function to 20% (0x33)*/
- mdfld_dsi_send_mcs_short_hs(sender,
- write_cabc_min_bright,
- 0x33,
- 1,
- MDFLD_DSI_SEND_PACKAGE);
-
- mdfld_dsi_write_hysteresis(dsi_config, pipe);
- mdfld_dsi_write_display_profile (dsi_config, pipe);
- mdfld_dsi_write_kbbc_profile (dsi_config, pipe);
- mdfld_dsi_write_gamma_setting (dsi_config, pipe);
-
- /* Enable backlight or/and LABC */
- gen_ctrl_val = BRIGHT_CNTL_BLOCK_ON | DISPLAY_DIMMING_ON| BACKLIGHT_ON;
- if (LABC_control == 1 || CABC_control == 1)
- gen_ctrl_val |= DISPLAY_DIMMING_ON| DISPLAY_BRIGHTNESS_AUTO | GAMMA_AUTO;
-
- if (LABC_control == 1)
- gen_ctrl_val |= AMBIENT_LIGHT_SENSE_ON;
-
- dev_priv->mipi_ctrl_display = gen_ctrl_val;
-
- mdfld_dsi_send_mcs_short_hs(sender,
- write_ctrl_display,
- (u8)gen_ctrl_val,
- 1,
- MDFLD_DSI_SEND_PACKAGE);
-
- if (CABC_control == 0)
- return;
- mdfld_dsi_send_mcs_short_hs(sender,
- write_ctrl_cabc,
- UI_IMAGE,
- 1,
- MDFLD_DSI_SEND_PACKAGE);
-}
-
-/*
- * Manage the mipi display brightness.
- * TODO: refine this interface later
- */
-void mdfld_dsi_brightness_control(struct drm_device *dev, int pipe, int level)
-{
- struct mdfld_dsi_pkg_sender *sender;
- struct drm_psb_private *dev_priv;
- struct mdfld_dsi_config *dsi_config;
- u32 gen_ctrl_val;
- int p_type;
-
- if (!dev || (pipe != 0 && pipe != 2)) {
- dev_err(dev->dev, "Invalid parameter\n");
- return;
- }
-
- p_type = mdfld_get_panel_type(dev, 0);
-
- dev_priv = dev->dev_private;
-
- if(pipe)
- dsi_config = dev_priv->dsi_configs[1];
- else
- dsi_config = dev_priv->dsi_configs[0];
-
- sender = mdfld_dsi_get_pkg_sender(dsi_config);
-
- if(!sender) {
- WARN_ON(1);
- return;
- }
-
- gen_ctrl_val = ((level * 0xff) / MDFLD_DSI_BRIGHTNESS_MAX_LEVEL) & 0xff;
-
- dev_dbg(dev->dev,
- "pipe = %d, gen_ctrl_val = %d. \n", pipe, gen_ctrl_val);
-
- if(p_type == TMD_VID || p_type == TMD_CMD){
- /* Set display backlight value */
- mdfld_dsi_send_mcs_short_hs(sender,
- tmd_write_display_brightness,
- (u8)gen_ctrl_val,
- 1,
- MDFLD_DSI_SEND_PACKAGE);
- } else {
- /* Set display backlight value */
- mdfld_dsi_send_mcs_short_hs(sender,
- write_display_brightness,
- (u8)gen_ctrl_val,
- 1,
- MDFLD_DSI_SEND_PACKAGE);
-
-
- /* Enable backlight control */
- if (level == 0)
- gen_ctrl_val = 0;
- else
- gen_ctrl_val = dev_priv->mipi_ctrl_display;
-
- mdfld_dsi_send_mcs_short_hs(sender,
- write_ctrl_display,
- (u8)gen_ctrl_val,
- 1,
- MDFLD_DSI_SEND_PACKAGE);
- }
-}
-
-/*
- * shut down DSI controller
- */
-void mdfld_dsi_controller_shutdown(struct mdfld_dsi_config * dsi_config, int pipe)
-{
- struct drm_device * dev;
- u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0;
- int retry = 100;
-
- if (!dsi_config) {
- WARN_ON(1);
- return;
- }
-
- dev = dsi_config->dev;
-
- if (!gma_power_begin(dev, true)) {
- dev_err(dev->dev, "hw begin failed\n");
- return;
- }
-
- if(!(REG_READ(MIPIA_DEVICE_READY_REG + reg_offset) & DSI_DEVICE_READY))
- goto shutdown_out;
-
- /* Send shut down package, clean packet send bit first */
- if(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT) {
- REG_WRITE((MIPIA_INTR_STAT_REG + reg_offset),
- (REG_READ(MIPIA_INTR_STAT_REG + reg_offset) | DSI_INTR_STATE_SPL_PKG_SENT));
- }
-
- /*send shut down package in HS*/
- REG_WRITE((MIPIA_DPI_CONTROL_REG + reg_offset), DSI_DPI_CTRL_HS_SHUTDOWN);
-
-
- /*
- * make sure shut down is sent.
- * FIXME: add max retry counter
- */
- while(!(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT)) {
- retry--;
-
- if(!retry) {
- dev_err(dev->dev, "timeout\n");
- break;
- }
- }
-
- /*sleep 1 ms to ensure shutdown finished*/
- msleep(100);
-
- /*un-ready device*/
- REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset),
- (REG_READ(MIPIA_DEVICE_READY_REG + reg_offset) & ~DSI_DEVICE_READY));
-
-shutdown_out:
- gma_power_end(dev);
-}
-
-void mdfld_dsi_controller_startup(struct mdfld_dsi_config * dsi_config, int pipe)
-{
- struct drm_device * dev;
- u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0;
- int retry = 100;
-
-
- if (!dsi_config) {
- WARN_ON(1);
- return;
- }
-
- dev = dsi_config->dev;
- dev_dbg(dev->dev, "starting up DSI controller on pipe %d...\n", pipe);
-
- if (!gma_power_begin(dev, true)) {
- dev_err(dev->dev, "hw begin failed\n");
- return;
- }
-
- if((REG_READ(MIPIA_DEVICE_READY_REG + reg_offset) & DSI_DEVICE_READY))
- goto startup_out;
-
- /*if config DPI, turn on DPI interface*/
- if(dsi_config->type == MDFLD_DSI_ENCODER_DPI) {
- if(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT) {
- REG_WRITE((MIPIA_INTR_STAT_REG + reg_offset), DSI_INTR_STATE_SPL_PKG_SENT);
- }
-
- REG_WRITE((MIPIA_DPI_CONTROL_REG + reg_offset), DSI_DPI_CTRL_HS_TURN_ON);
-
- /*
- * make sure shut down is sent.
- * FIXME: add max retry counter
- */
- while(!(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT)) {
- retry--;
- if(!retry) {
- dev_err(dev->dev, "timeout\n");
- break;
- }
- }
-
- msleep(100);
- }
-
- /*set device ready*/
- REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset),
- (REG_READ(MIPIA_DEVICE_READY_REG + reg_offset) | DSI_DEVICE_READY));
-
-startup_out:
- gma_power_end(dev);
-}
-
-
-static int mdfld_dsi_get_panel_status(struct mdfld_dsi_config *dsi_config,
- u8 dcs,
- u32 *data,
- u8 transmission)
-{
- struct mdfld_dsi_pkg_sender *sender
- = mdfld_dsi_get_pkg_sender(dsi_config);
-
- if (!sender || !data) {
- DRM_ERROR("Invalid parameter\n");
- return -EINVAL;
- }
-
- if (transmission == MDFLD_DSI_HS_TRANSMISSION)
- return mdfld_dsi_read_mcs_hs(sender, dcs, data, 1);
- else if (transmission == MDFLD_DSI_LP_TRANSMISSION)
- return mdfld_dsi_read_mcs_lp(sender, dcs, data, 1);
- else
- return -EINVAL;
-}
-
-int mdfld_dsi_get_power_mode(struct mdfld_dsi_config *dsi_config,
- u32 *mode,
- u8 transmission)
-{
- if (!dsi_config || !mode) {
- DRM_ERROR("Invalid parameter\n");
- return -EINVAL;
- }
-
- return mdfld_dsi_get_panel_status(dsi_config, 0x0a, mode, transmission);
-}
-
-int mdfld_dsi_get_diagnostic_result(struct mdfld_dsi_config *dsi_config,
- u32 *result,
- u8 transmission)
-{
- if (!dsi_config || !result) {
- DRM_ERROR("Invalid parameter\n");
- return -EINVAL;
- }
-
- return mdfld_dsi_get_panel_status(dsi_config, 0x0f, result,
- transmission);
-}
-
-/*
- * NOTE: this function was used by OSPM.
- * TODO: will be removed later, should work out display interfaces for OSPM
- */
-void mdfld_dsi_controller_init(struct mdfld_dsi_config * dsi_config, int pipe)
-{
- if(!dsi_config || ((pipe != 0) && (pipe != 2))) {
- WARN_ON(1);
- return;
- }
-
- if(dsi_config->type)
- mdfld_dsi_dpi_controller_init(dsi_config, pipe);
- else
- mdfld_dsi_controller_dbi_init(dsi_config, pipe);
-}
-
-static void mdfld_dsi_connector_save(struct drm_connector * connector)
-{
-}
-
-static void mdfld_dsi_connector_restore(struct drm_connector * connector)
-{
-}
-
-static enum drm_connector_status mdfld_dsi_connector_detect(struct drm_connector * connector, bool force)
-{
- struct psb_intel_output *psb_output
- = to_psb_intel_output(connector);
- struct mdfld_dsi_connector *dsi_connector
- = MDFLD_DSI_CONNECTOR(psb_output);
- return dsi_connector->status;
-}
-
-static int mdfld_dsi_connector_set_property(struct drm_connector *connector,
- struct drm_property *property,
- uint64_t value)
-{
- struct drm_encoder *encoder = connector->encoder;
-
- if (!strcmp(property->name, "scaling mode") && encoder) {
- struct psb_intel_crtc * psb_crtc = to_psb_intel_crtc(encoder->crtc);
- bool bTransitionFromToCentered;
- uint64_t curValue;
-
- if (!psb_crtc)
- goto set_prop_error;
-
- switch (value) {
- case DRM_MODE_SCALE_FULLSCREEN:
- break;
- case DRM_MODE_SCALE_NO_SCALE:
- break;
- case DRM_MODE_SCALE_ASPECT:
- break;
- default:
- goto set_prop_error;
- }
-
- if (drm_connector_property_get_value(connector, property, &curValue))
- goto set_prop_error;
-
- if (curValue == value)
- goto set_prop_done;
-
- if (drm_connector_property_set_value(connector, property, value))
- goto set_prop_error;
-
- bTransitionFromToCentered = (curValue == DRM_MODE_SCALE_NO_SCALE) ||
- (value == DRM_MODE_SCALE_NO_SCALE);
-
- if (psb_crtc->saved_mode.hdisplay != 0 &&
- psb_crtc->saved_mode.vdisplay != 0) {
- if (bTransitionFromToCentered) {
- if (!drm_crtc_helper_set_mode(encoder->crtc, &psb_crtc->saved_mode,
- encoder->crtc->x, encoder->crtc->y, encoder->crtc->fb))
- goto set_prop_error;
- } else {
- struct drm_encoder_helper_funcs *pEncHFuncs = encoder->helper_private;
- pEncHFuncs->mode_set(encoder, &psb_crtc->saved_mode,
- &psb_crtc->saved_adjusted_mode);
- }
- }
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- } else if (!strcmp(property->name, "backlight") && encoder) {
- struct drm_psb_private *dev_priv = encoder->dev->dev_private;
- struct backlight_device *psb_bd = dev_priv->backlight_device;
- dev_dbg(encoder->dev->dev, "backlight level = %d\n", (int)value);
- if (drm_connector_property_set_value(connector, property, value))
- goto set_prop_error;
- else {
- dev_dbg(encoder->dev->dev,
- "set brightness to %d", (int)value);
- if (psb_bd) {
- psb_bd->props.brightness = value;
- backlight_update_status(psb_bd);
- }
- }
-#endif
- }
-set_prop_done:
- return 0;
-set_prop_error:
- return -1;
-}
-
-static void mdfld_dsi_connector_destroy(struct drm_connector *connector)
-{
- struct psb_intel_output * psb_output = to_psb_intel_output(connector);
- struct mdfld_dsi_connector * dsi_connector = MDFLD_DSI_CONNECTOR(psb_output);
- struct mdfld_dsi_pkg_sender * sender;
-
- if(!dsi_connector)
- return;
-
- drm_sysfs_connector_remove(connector);
- drm_connector_cleanup(connector);
-
- sender = dsi_connector->pkg_sender;
-
- mdfld_dsi_pkg_sender_destroy(sender);
-
- kfree(dsi_connector);
-}
-
-static int mdfld_dsi_connector_get_modes(struct drm_connector * connector)
-{
- struct psb_intel_output * psb_output = to_psb_intel_output(connector);
- struct mdfld_dsi_connector * dsi_connector = MDFLD_DSI_CONNECTOR(psb_output);
- struct mdfld_dsi_config * dsi_config = mdfld_dsi_get_config(dsi_connector);
- struct drm_display_mode * fixed_mode = dsi_config->fixed_mode;
- struct drm_display_mode * dup_mode = NULL;
- struct drm_device * dev = connector->dev;
-
- connector->display_info.min_vfreq = 0;
- connector->display_info.max_vfreq = 200;
- connector->display_info.min_hfreq = 0;
- connector->display_info.max_hfreq = 200;
-
- if(fixed_mode) {
- dev_dbg(dev->dev, "fixed_mode %dx%d\n",
- fixed_mode->hdisplay, fixed_mode->vdisplay);
-
- dup_mode = drm_mode_duplicate(dev, fixed_mode);
- drm_mode_probed_add(connector, dup_mode);
- return 1;
- }
- dev_err(dev->dev, "Didn't get any modes!\n");
- return 0;
-}
-
-static int mdfld_dsi_connector_mode_valid(struct drm_connector * connector, struct drm_display_mode * mode)
-{
- struct psb_intel_output * psb_output = to_psb_intel_output(connector);
- struct mdfld_dsi_connector * dsi_connector = MDFLD_DSI_CONNECTOR(psb_output);
- struct mdfld_dsi_config * dsi_config = mdfld_dsi_get_config(dsi_connector);
- struct drm_display_mode * fixed_mode = dsi_config->fixed_mode;
-
- dev_dbg(connector->dev->dev, "mode %p, fixed mode %p\n",
- mode, fixed_mode);
-
- if(mode->flags & DRM_MODE_FLAG_DBLSCAN)
- return MODE_NO_DBLESCAN;
-
- if(mode->flags & DRM_MODE_FLAG_INTERLACE)
- return MODE_NO_INTERLACE;
-
- /**
- * FIXME: current DC has no fitting unit, reject any mode setting request
- * will figure out a way to do up-scaling(pannel fitting) later.
- **/
- if(fixed_mode) {
- if(mode->hdisplay != fixed_mode->hdisplay)
- return MODE_PANEL;
-
- if(mode->vdisplay != fixed_mode->vdisplay)
- return MODE_PANEL;
- }
- dev_dbg(connector->dev->dev, "mode ok\n");
-
- return MODE_OK;
-}
-
-static void mdfld_dsi_connector_dpms(struct drm_connector *connector, int mode)
-{
-#ifdef CONFIG_PM_RUNTIME
- struct drm_device * dev = connector->dev;
- struct drm_psb_private * dev_priv = dev->dev_private;
- bool panel_on, panel_on2;
-#endif
- /* First, execute DPMS */
- drm_helper_connector_dpms(connector, mode);
-
-#ifdef CONFIG_PM_RUNTIME
- if(mdfld_panel_dpi(dev)) {
- /* DPI panel */
- panel_on = dev_priv->dpi_panel_on;
- panel_on2 = dev_priv->dpi_panel_on2;
- } else {
- /* DBI panel */
- panel_on = dev_priv->dbi_panel_on;
- panel_on2 = dev_priv->dbi_panel_on2;
- }
-
- /* Then check all display panels + monitors status */
- /* Make sure that the Display (B) sub-system status isn't i3 when
- * R/W the DC register, otherwise "Fabric error" issue would occur
- * during S0i3 state. */
- if(!panel_on && !panel_on2 && !(REG_READ(HDMIB_CONTROL)
- & HDMIB_PORT_EN)) {
- /* Request rpm idle */
- if(dev_priv->rpm_enabled)
- pm_request_idle(&dev->pdev->dev);
- }
- /*
- * if rpm wasn't enabled yet, try to allow it
- * FIXME: won't enable rpm for DPI since DPI
- * CRTC setting is a little messy now.
- * Enable it later!
- */
-#if 0
- if(!dev_priv->rpm_enabled && !mdfld_panel_dpi(dev))
- ospm_runtime_pm_allow(dev);
-#endif
-#endif
-}
-
-static struct drm_encoder *mdfld_dsi_connector_best_encoder(
- struct drm_connector *connector)
-{
- struct psb_intel_output * psb_output = to_psb_intel_output(connector);
- struct mdfld_dsi_connector * dsi_connector = MDFLD_DSI_CONNECTOR(psb_output);
- struct mdfld_dsi_config * dsi_config = mdfld_dsi_get_config(dsi_connector);
- struct mdfld_dsi_encoder * encoder = NULL;
-
- if(dsi_config->type == MDFLD_DSI_ENCODER_DBI)
- encoder = dsi_config->encoders[MDFLD_DSI_ENCODER_DBI];
- else if (dsi_config->type == MDFLD_DSI_ENCODER_DPI)
- encoder = dsi_config->encoders[MDFLD_DSI_ENCODER_DPI];
-
- dev_dbg(connector->dev->dev, "get encoder %p\n", encoder);
-
- if(!encoder) {
- dev_err(connector->dev->dev,
- "Invalid encoder for type %d\n", dsi_config->type);
- return NULL;
- }
- dsi_config->encoder = encoder;
- return &encoder->base;
-}
-
-/* DSI connector funcs */
-static const struct drm_connector_funcs mdfld_dsi_connector_funcs = {
- .dpms = /*drm_helper_connector_dpms*/mdfld_dsi_connector_dpms,
- .save = mdfld_dsi_connector_save,
- .restore = mdfld_dsi_connector_restore,
- .detect = mdfld_dsi_connector_detect,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .set_property = mdfld_dsi_connector_set_property,
- .destroy = mdfld_dsi_connector_destroy,
-};
-
-/* DSI connector helper funcs */
-static const struct drm_connector_helper_funcs mdfld_dsi_connector_helper_funcs = {
- .get_modes = mdfld_dsi_connector_get_modes,
- .mode_valid = mdfld_dsi_connector_mode_valid,
- .best_encoder = mdfld_dsi_connector_best_encoder,
-};
-
-static int mdfld_dsi_get_default_config(struct drm_device * dev,
- struct mdfld_dsi_config * config, int pipe)
-{
- if(!dev || !config) {
- WARN_ON(1);
- return -EINVAL;
- }
-
- config->bpp = 24;
- config->type = mdfld_panel_dpi(dev);
- config->lane_count = 2;
- config->channel_num = 0;
- /*NOTE: video mode is ignored when type is MDFLD_DSI_ENCODER_DBI*/
- if (mdfld_get_panel_type(dev, pipe) == TMD_VID) {
- config->video_mode = MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_PULSE;
- } else {
- config->video_mode = MDFLD_DSI_VIDEO_BURST_MODE;
- }
-
- return 0;
-}
-
-/*
- * Returns the panel fixed mode from configuration.
- */
-struct drm_display_mode *
-mdfld_dsi_get_configuration_mode(struct mdfld_dsi_config * dsi_config, int pipe)
-{
- struct drm_device *dev = dsi_config->dev;
- struct drm_display_mode *mode;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_timing_info *ti = &dev_priv->gct_data.DTD;
- bool use_gct = false;
-
- mode = kzalloc(sizeof(*mode), GFP_KERNEL);
- if (!mode) {
- dev_err(dev->dev, "Out of memory for mode\n");
- return NULL;
- }
- if (use_gct) {
- dev_dbg(dev->dev, "gct find MIPI panel.\n");
-
- mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
- mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
- mode->hsync_start = mode->hdisplay + \
- ((ti->hsync_offset_hi << 8) | \
- ti->hsync_offset_lo);
- mode->hsync_end = mode->hsync_start + \
- ((ti->hsync_pulse_width_hi << 8) | \
- ti->hsync_pulse_width_lo);
- mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \
- ti->hblank_lo);
- mode->vsync_start = \
- mode->vdisplay + ((ti->vsync_offset_hi << 8) | \
- ti->vsync_offset_lo);
- mode->vsync_end = \
- mode->vsync_start + ((ti->vsync_pulse_width_hi << 8) | \
- ti->vsync_pulse_width_lo);
- mode->vtotal = mode->vdisplay + \
- ((ti->vblank_hi << 8) | ti->vblank_lo);
- mode->clock = ti->pixel_clock * 10;
- } else {
- if(dsi_config->type == MDFLD_DSI_ENCODER_DPI) {
- if (mdfld_get_panel_type(dev, pipe) == TMD_VID) {
- mode->hdisplay = 480;
- mode->vdisplay = 854;
- mode->hsync_start = 487;
- mode->hsync_end = 490;
- mode->htotal = 499;
- mode->vsync_start = 861;
- mode->vsync_end = 865;
- mode->vtotal = 873;
- mode->clock = 33264;
- } else {
- mode->hdisplay = 864;
- mode->vdisplay = 480;
- mode->hsync_start = 873;
- mode->hsync_end = 876;
- mode->htotal = 887;
- mode->vsync_start = 487;
- mode->vsync_end = 490;
- mode->vtotal = 499;
- mode->clock = 33264;
- }
- } else if(dsi_config->type == MDFLD_DSI_ENCODER_DBI) {
- mode->hdisplay = 864;
- mode->vdisplay = 480;
- mode->hsync_start = 872;
- mode->hsync_end = 876;
- mode->htotal = 884;
- mode->vsync_start = 482;
- mode->vsync_end = 494;
- mode->vtotal = 486;
- mode->clock = 25777;
-
- }
- }
-
- drm_mode_set_name(mode);
- drm_mode_set_crtcinfo(mode, 0);
-
- mode->type |= DRM_MODE_TYPE_PREFERRED;
-
- return mode;
-}
-
-int mdfld_dsi_panel_reset(int pipe)
-{
- unsigned gpio;
- int ret = 0;
-
- switch (pipe) {
- case 0:
- gpio = 128;
- break;
- case 2:
- gpio = 34;
- break;
- default:
- DRM_ERROR("Invalid output\n");
- return -EINVAL;
- }
-
- ret = gpio_request(gpio, "gfx");
- if (ret) {
- DRM_ERROR("gpio_rqueset failed\n");
- return ret;
- }
-
- ret = gpio_direction_output(gpio, 1);
- if (ret) {
- DRM_ERROR("gpio_direction_output failed\n");
- goto gpio_error;
- }
-
- gpio_get_value(128);
-
-gpio_error:
- if (gpio_is_valid(gpio))
- gpio_free(gpio);
-
- return ret;
-}
-
-/*
- * MIPI output init
- * @dev drm device
- * @pipe pipe number. 0 or 2
- * @config
- *
- * Do the initialization of a MIPI output, including create DRM mode objects
- * initialization of DSI output on @pipe
- */
-void mdfld_dsi_output_init(struct drm_device *dev,
- int pipe,
- struct mdfld_dsi_config *config,
- struct panel_funcs* p_cmd_funcs,
- struct panel_funcs* p_vid_funcs)
-{
- struct mdfld_dsi_config * dsi_config;
- struct mdfld_dsi_connector * dsi_connector;
- struct psb_intel_output * psb_output;
- struct drm_connector * connector;
- struct mdfld_dsi_encoder * encoder;
- struct drm_psb_private * dev_priv = dev->dev_private;
- struct panel_info dsi_panel_info;
- u32 width_mm, height_mm;
-
- dev_dbg(dev->dev, "init DSI output on pipe %d\n", pipe);
-
- if(!dev || ((pipe != 0) && (pipe != 2))) {
- WARN_ON(1);
- return;
- }
-
- /*create a new connetor*/
- dsi_connector = kzalloc(sizeof(struct mdfld_dsi_connector), GFP_KERNEL);
- if(!dsi_connector) {
- DRM_ERROR("No memory");
- return;
- }
-
- dsi_connector->pipe = pipe;
-
- /*set DSI config*/
- if(config) {
- dsi_config = config;
- } else {
- dsi_config = kzalloc(sizeof(struct mdfld_dsi_config), GFP_KERNEL);
- if(!dsi_config) {
- dev_err(dev->dev,
- "cannot allocate memory for DSI config\n");
- goto dsi_init_err0;
- }
-
- mdfld_dsi_get_default_config(dev, dsi_config, pipe);
- }
-
- dsi_connector->private = dsi_config;
-
- dsi_config->changed = 1;
- dsi_config->dev = dev;
-
- /* Init fixed mode basing on DSI config type */
- if(dsi_config->type == MDFLD_DSI_ENCODER_DBI) {
- dsi_config->fixed_mode = p_cmd_funcs->get_config_mode(dev);
- if(p_cmd_funcs->get_panel_info(dev, pipe, &dsi_panel_info))
- goto dsi_init_err0;
- } else if(dsi_config->type == MDFLD_DSI_ENCODER_DPI) {
- dsi_config->fixed_mode = p_vid_funcs->get_config_mode(dev);
- if(p_vid_funcs->get_panel_info(dev, pipe, &dsi_panel_info))
- goto dsi_init_err0;
- }
-
- width_mm = dsi_panel_info.width_mm;
- height_mm = dsi_panel_info.height_mm;
-
- dsi_config->mode = dsi_config->fixed_mode;
- dsi_config->connector = dsi_connector;
-
- if(!dsi_config->fixed_mode) {
- dev_err(dev->dev, "No pannel fixed mode was found\n");
- goto dsi_init_err0;
- }
-
- if(pipe && dev_priv->dsi_configs[0]) {
- dsi_config->dvr_ic_inited = 0;
- dev_priv->dsi_configs[1] = dsi_config;
- } else if(pipe == 0) {
- dsi_config->dvr_ic_inited = 1;
- dev_priv->dsi_configs[0] = dsi_config;
- } else {
- dev_err(dev->dev, "Trying to init MIPI1 before MIPI0\n");
- goto dsi_init_err0;
- }
-
- /*init drm connector object*/
- psb_output = &dsi_connector->base;
-
- psb_output->type = (pipe == 0) ? INTEL_OUTPUT_MIPI : INTEL_OUTPUT_MIPI2;
-
- connector = &psb_output->base;
- /* Revisit type if MIPI/HDMI bridges ever appear on Medfield */
- drm_connector_init(dev, connector, &mdfld_dsi_connector_funcs,
- DRM_MODE_CONNECTOR_LVDS);
- drm_connector_helper_add(connector, &mdfld_dsi_connector_helper_funcs);
-
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
- connector->display_info.width_mm = width_mm;
- connector->display_info.height_mm = height_mm;
- connector->interlace_allowed = false;
- connector->doublescan_allowed = false;
-
- /* Attach properties */
- drm_connector_attach_property(connector, dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN);
- drm_connector_attach_property(connector, dev_priv->backlight_property, MDFLD_DSI_BRIGHTNESS_MAX_LEVEL);
-
- /* Init DSI package sender on this output */
- if (mdfld_dsi_pkg_sender_init(dsi_connector, pipe)) {
- DRM_ERROR("Package Sender initialization failed on pipe %d\n", pipe);
- goto dsi_init_err0;
- }
-
- /* Init DBI & DPI encoders */
- if (p_cmd_funcs) {
- encoder = mdfld_dsi_dbi_init(dev, dsi_connector, p_cmd_funcs);
- if(!encoder) {
- dev_err(dev->dev, "Create DBI encoder failed\n");
- goto dsi_init_err1;
- }
- encoder->private = dsi_config;
- dsi_config->encoders[MDFLD_DSI_ENCODER_DBI] = encoder;
- }
-
- if(p_vid_funcs) {
- encoder = mdfld_dsi_dpi_init(dev, dsi_connector, p_vid_funcs);
- if(!encoder) {
- dev_err(dev->dev, "Create DPI encoder failed\n");
- goto dsi_init_err1;
- }
- encoder->private = dsi_config;
- dsi_config->encoders[MDFLD_DSI_ENCODER_DPI] = encoder;
- }
-
- drm_sysfs_connector_add(connector);
- return;
-
- /*TODO: add code to destroy outputs on error*/
-dsi_init_err1:
- /*destroy sender*/
- mdfld_dsi_pkg_sender_destroy(dsi_connector->pkg_sender);
-
- drm_connector_cleanup(connector);
- kfree(dsi_config->fixed_mode);
- kfree(dsi_config);
-dsi_init_err0:
- kfree(dsi_connector);
-}
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * jim liu <jim.liu@intel.com>
- * Jackie Li<yaodong.li@intel.com>
- */
-
-#ifndef __MDFLD_DSI_OUTPUT_H__
-#define __MDFLD_DSI_OUTPUT_H__
-
-#include <linux/backlight.h>
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include <drm/drm_crtc.h>
-#include <drm/drm_edid.h>
-
-#include "psb_drv.h"
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "power.h"
-#include "mdfld_output.h"
-
-#include <asm/mrst.h>
-
-
-static inline struct mdfld_dsi_config *
- mdfld_dsi_get_config(struct mdfld_dsi_connector *connector)
-{
- if (!connector)
- return NULL;
- return (struct mdfld_dsi_config *)connector->private;
-}
-
-static inline void *mdfld_dsi_get_pkg_sender(struct mdfld_dsi_config *config)
-{
- struct mdfld_dsi_connector *dsi_connector;
-
- if (!config)
- return NULL;
-
- dsi_connector = config->connector;
-
- if (!dsi_connector)
- return NULL;
-
- return dsi_connector->pkg_sender;
-}
-
-static inline struct mdfld_dsi_config *
- mdfld_dsi_encoder_get_config(struct mdfld_dsi_encoder *encoder)
-{
- if (!encoder)
- return NULL;
- return (struct mdfld_dsi_config *)encoder->private;
-}
-
-static inline struct mdfld_dsi_connector *
- mdfld_dsi_encoder_get_connector(struct mdfld_dsi_encoder *encoder)
-{
- struct mdfld_dsi_config *config;
-
- if (!encoder)
- return NULL;
-
- config = mdfld_dsi_encoder_get_config(encoder);
- if (!config)
- return NULL;
-
- return config->connector;
-}
-
-static inline void *mdfld_dsi_encoder_get_pkg_sender(
- struct mdfld_dsi_encoder *encoder)
-{
- struct mdfld_dsi_config *dsi_config;
-
- dsi_config = mdfld_dsi_encoder_get_config(encoder);
- if (!dsi_config)
- return NULL;
-
- return mdfld_dsi_get_pkg_sender(dsi_config);
-}
-
-static inline int mdfld_dsi_encoder_get_pipe(struct mdfld_dsi_encoder *encoder)
-{
- struct mdfld_dsi_connector *connector;
-
- if (!encoder)
- return -1;
-
- connector = mdfld_dsi_encoder_get_connector(encoder);
- if (!connector)
- return -1;
-
- return connector->pipe;
-}
-
-extern void mdfld_dsi_gen_fifo_ready(struct drm_device *dev,
- u32 gen_fifo_stat_reg, u32 fifo_stat);
-extern void mdfld_dsi_brightness_init(struct mdfld_dsi_config *dsi_config,
- int pipe);
-extern void mdfld_dsi_brightness_control(struct drm_device *dev, int pipe,
- int level);
-extern void mdfld_dsi_output_init(struct drm_device *dev, int pipe,
- struct mdfld_dsi_config *config,
- struct panel_funcs *p_cmd_funcs,
- struct panel_funcs *p_vid_funcs);
-extern void mdfld_dsi_controller_init(struct mdfld_dsi_config *dsi_config,
- int pipe);
-extern int mdfld_dsi_get_power_mode(struct mdfld_dsi_config *dsi_config,
- u32 *mode,
- u8 transmission);
-extern int mdfld_dsi_get_diagnostic_result(struct mdfld_dsi_config *dsi_config,
- u32 *result,
- u8 transmission);
-extern int mdfld_dsi_panel_reset(int pipe);
-
-#endif /*__MDFLD_DSI_OUTPUT_H__*/
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Jackie Li<yaodong.li@intel.com>
- */
-
-#include <linux/freezer.h>
-
-#include "mdfld_dsi_output.h"
-#include "mdfld_dsi_pkg_sender.h"
-#include "mdfld_dsi_dbi.h"
-#include "mdfld_dsi_dpi.h"
-
-#define MDFLD_DSI_DBI_FIFO_TIMEOUT 100
-#define MDFLD_DSI_MAX_RETURN_PACKET_SIZE 512
-#define MDFLD_DSI_READ_MAX_COUNT 5000
-
-static const char * const dsi_errors[] = {
- "RX SOT Error",
- "RX SOT Sync Error",
- "RX EOT Sync Error",
- "RX Escape Mode Entry Error",
- "RX LP TX Sync Error",
- "RX HS Receive Timeout Error",
- "RX False Control Error",
- "RX ECC Single Bit Error",
- "RX ECC Multibit Error",
- "RX Checksum Error",
- "RX DSI Data Type Not Recognised",
- "RX DSI VC ID Invalid",
- "TX False Control Error",
- "TX ECC Single Bit Error",
- "TX ECC Multibit Error",
- "TX Checksum Error",
- "TX DSI Data Type Not Recognised",
- "TX DSI VC ID invalid",
- "High Contention",
- "Low contention",
- "DPI FIFO Under run",
- "HS TX Timeout",
- "LP RX Timeout",
- "Turn Around ACK Timeout",
- "ACK With No Error",
- "RX Invalid TX Length",
- "RX Prot Violation",
- "HS Generic Write FIFO Full",
- "LP Generic Write FIFO Full",
- "Generic Read Data Avail",
- "Special Packet Sent",
- "Tearing Effect",
-};
-
-static int wait_for_gen_fifo_empty(struct mdfld_dsi_pkg_sender *sender,
- u32 mask)
-{
- struct drm_device *dev = sender->dev;
- u32 gen_fifo_stat_reg = sender->mipi_gen_fifo_stat_reg;
- int retry = 0xffff;
-
- while (retry--) {
- if ((mask & REG_READ(gen_fifo_stat_reg)) == mask)
- return 0;
- udelay(100);
- }
- dev_err(dev->dev, "fifo is NOT empty 0x%08x\n",
- REG_READ(gen_fifo_stat_reg));
- return -EIO;
-}
-
-static int wait_for_all_fifos_empty(struct mdfld_dsi_pkg_sender *sender)
-{
- return wait_for_gen_fifo_empty(sender, (1 << 2) | (1 << 10) | (1 << 18)
- | (1 << 26) | (1 << 27) | (1 << 28));
-}
-
-static int wait_for_lp_fifos_empty(struct mdfld_dsi_pkg_sender *sender)
-{
- return wait_for_gen_fifo_empty(sender, (1 << 10) | (1 << 26));
-}
-
-static int wait_for_hs_fifos_empty(struct mdfld_dsi_pkg_sender *sender)
-{
- return wait_for_gen_fifo_empty(sender, (1 << 2) | (1 << 18));
-}
-
-static int wait_for_dbi_fifo_empty(struct mdfld_dsi_pkg_sender *sender)
-{
- return wait_for_gen_fifo_empty(sender, (1 << 27));
-}
-
-static int handle_dsi_error(struct mdfld_dsi_pkg_sender *sender, u32 mask)
-{
- u32 intr_stat_reg = sender->mipi_intr_stat_reg;
- struct drm_device *dev = sender->dev;
-
- switch (mask) {
- case (1 << 0):
- case (1 << 1):
- case (1 << 2):
- case (1 << 3):
- case (1 << 4):
- case (1 << 5):
- case (1 << 6):
- case (1 << 7):
- case (1 << 8):
- case (1 << 9):
- case (1 << 10):
- case (1 << 11):
- case (1 << 12):
- case (1 << 13):
- break;
- case (1 << 14):
- /*wait for all fifo empty*/
- /*wait_for_all_fifos_empty(sender)*/;
- break;
- case (1 << 15):
- break;
- case (1 << 16):
- break;
- case (1 << 17):
- break;
- case (1 << 18):
- case (1 << 19):
- /*wait for contention recovery time*/
- /*mdelay(10);*/
- /*wait for all fifo empty*/
- if (0)
- wait_for_all_fifos_empty(sender);
- break;
- case (1 << 20):
- break;
- case (1 << 21):
- /*wait for all fifo empty*/
- /*wait_for_all_fifos_empty(sender);*/
- break;
- case (1 << 22):
- break;
- case (1 << 23):
- case (1 << 24):
- case (1 << 25):
- case (1 << 26):
- case (1 << 27):
- /* HS Gen fifo full */
- REG_WRITE(intr_stat_reg, mask);
- wait_for_hs_fifos_empty(sender);
- break;
- case (1 << 28):
- /* LP Gen fifo full\n */
- REG_WRITE(intr_stat_reg, mask);
- wait_for_lp_fifos_empty(sender);
- break;
- case (1 << 29):
- case (1 << 30):
- case (1 << 31):
- break;
- }
-
- if (mask & REG_READ(intr_stat_reg))
- dev_warn(dev->dev, "Cannot clean interrupt 0x%08x\n", mask);
-
- return 0;
-}
-
-static int dsi_error_handler(struct mdfld_dsi_pkg_sender *sender)
-{
- struct drm_device *dev = sender->dev;
- u32 intr_stat_reg = sender->mipi_intr_stat_reg;
- u32 mask;
- u32 intr_stat;
- int i;
- int err = 0;
-
- intr_stat = REG_READ(intr_stat_reg);
-
- for (i = 0; i < 32; i++) {
- mask = (0x00000001UL) << i;
- if (intr_stat & mask) {
- dev_dbg(dev->dev, "[DSI]: %s\n", dsi_errors[i]);
- err = handle_dsi_error(sender, mask);
- if (err)
- dev_err(dev->dev, "Cannot handle error\n");
- }
- }
- return err;
-}
-
-static inline int dbi_cmd_sent(struct mdfld_dsi_pkg_sender *sender)
-{
- struct drm_device *dev = sender->dev;
- u32 retry = 0xffff;
- u32 dbi_cmd_addr_reg = sender->mipi_cmd_addr_reg;
-
- /* Query the command execution status */
- while (retry--) {
- if (!(REG_READ(dbi_cmd_addr_reg) & (1 << 0)))
- break;
- }
-
- if (!retry) {
- dev_err(dev->dev, "Timeout waiting for DBI Command status\n");
- return -EAGAIN;
- }
- return 0;
-}
-
-/*
- * NOTE: this interface is abandoned expect for write_mem_start DCS
- * other DCS are sent via generic pkg interfaces
- */
-static int send_dcs_pkg(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg)
-{
- struct drm_device *dev = sender->dev;
- struct mdfld_dsi_dcs_pkg *dcs_pkg = &pkg->pkg.dcs_pkg;
- u32 dbi_cmd_len_reg = sender->mipi_cmd_len_reg;
- u32 dbi_cmd_addr_reg = sender->mipi_cmd_addr_reg;
- u32 cb_phy = sender->dbi_cb_phy;
- u32 index = 0;
- u8 *cb = (u8 *)sender->dbi_cb_addr;
- int i;
- int ret;
-
- if (!sender->dbi_pkg_support) {
- dev_err(dev->dev, "Trying to send DCS on a non DBI output, abort!\n");
- return -ENOTSUPP;
- }
-
- /*wait for DBI fifo empty*/
- wait_for_dbi_fifo_empty(sender);
-
- *(cb + (index++)) = dcs_pkg->cmd;
- if (dcs_pkg->param_num) {
- for (i = 0; i < dcs_pkg->param_num; i++)
- *(cb + (index++)) = *(dcs_pkg->param + i);
- }
-
- REG_WRITE(dbi_cmd_len_reg, (1 + dcs_pkg->param_num));
- REG_WRITE(dbi_cmd_addr_reg,
- (cb_phy << CMD_MEM_ADDR_OFFSET)
- | (1 << 0)
- | ((dcs_pkg->data_src == CMD_DATA_SRC_PIPE) ? (1 << 1) : 0));
-
- ret = dbi_cmd_sent(sender);
- if (ret) {
- dev_err(dev->dev, "command 0x%x not complete\n", dcs_pkg->cmd);
- return -EAGAIN;
- }
- return 0;
-}
-
-static int __send_short_pkg(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg)
-{
- struct drm_device *dev = sender->dev;
- u32 hs_gen_ctrl_reg = sender->mipi_hs_gen_ctrl_reg;
- u32 lp_gen_ctrl_reg = sender->mipi_lp_gen_ctrl_reg;
- u32 gen_ctrl_val = 0;
- struct mdfld_dsi_gen_short_pkg *short_pkg = &pkg->pkg.short_pkg;
-
- gen_ctrl_val |= short_pkg->cmd << MCS_COMMANDS_POS;
- gen_ctrl_val |= 0 << DCS_CHANNEL_NUMBER_POS;
- gen_ctrl_val |= pkg->pkg_type;
- gen_ctrl_val |= short_pkg->param << MCS_PARAMETER_POS;
-
- if (pkg->transmission_type == MDFLD_DSI_HS_TRANSMISSION) {
- /* wait for hs fifo empty */
- /* wait_for_hs_fifos_empty(sender); */
- /* Send pkg */
- REG_WRITE(hs_gen_ctrl_reg, gen_ctrl_val);
- } else if (pkg->transmission_type == MDFLD_DSI_LP_TRANSMISSION) {
- /* wait_for_lp_fifos_empty(sender); */
- /* Send pkg*/
- REG_WRITE(lp_gen_ctrl_reg, gen_ctrl_val);
- } else {
- dev_err(dev->dev, "Unknown transmission type %d\n",
- pkg->transmission_type);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int __send_long_pkg(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg)
-{
- struct drm_device *dev = sender->dev;
- u32 hs_gen_ctrl_reg = sender->mipi_hs_gen_ctrl_reg;
- u32 hs_gen_data_reg = sender->mipi_hs_gen_data_reg;
- u32 lp_gen_ctrl_reg = sender->mipi_lp_gen_ctrl_reg;
- u32 lp_gen_data_reg = sender->mipi_lp_gen_data_reg;
- u32 gen_ctrl_val = 0;
- u32 *dp;
- int i;
- struct mdfld_dsi_gen_long_pkg *long_pkg = &pkg->pkg.long_pkg;
-
- dp = long_pkg->data;
-
- /*
- * Set up word count for long pkg
- * FIXME: double check word count field.
- * currently, using the byte counts of the payload as the word count.
- * ------------------------------------------------------------
- * | DI | WC | ECC| PAYLOAD |CHECKSUM|
- * ------------------------------------------------------------
- */
- gen_ctrl_val |= (long_pkg->len << 2) << WORD_COUNTS_POS;
- gen_ctrl_val |= 0 << DCS_CHANNEL_NUMBER_POS;
- gen_ctrl_val |= pkg->pkg_type;
-
- if (pkg->transmission_type == MDFLD_DSI_HS_TRANSMISSION) {
- /* Wait for hs ctrl and data fifos to be empty */
- /* wait_for_hs_fifos_empty(sender); */
- for (i = 0; i < long_pkg->len; i++)
- REG_WRITE(hs_gen_data_reg, *(dp + i));
- REG_WRITE(hs_gen_ctrl_reg, gen_ctrl_val);
- } else if (pkg->transmission_type == MDFLD_DSI_LP_TRANSMISSION) {
- /* wait_for_lp_fifos_empty(sender); */
- for (i = 0; i < long_pkg->len; i++)
- REG_WRITE(lp_gen_data_reg, *(dp + i));
- REG_WRITE(lp_gen_ctrl_reg, gen_ctrl_val);
- } else {
- dev_err(dev->dev, "Unknown transmission type %d\n",
- pkg->transmission_type);
- return -EINVAL;
- }
-
- return 0;
-
-}
-
-static int send_mcs_short_pkg(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg)
-{
- return __send_short_pkg(sender, pkg);
-}
-
-static int send_mcs_long_pkg(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg)
-{
- return __send_long_pkg(sender, pkg);
-}
-
-static int send_gen_short_pkg(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg)
-{
- return __send_short_pkg(sender, pkg);
-}
-
-static int send_gen_long_pkg(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg)
-{
- return __send_long_pkg(sender, pkg);
-}
-
-static int send_pkg_prepare(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg)
-{
- u8 cmd;
- u8 *data;
-
- switch (pkg->pkg_type) {
- case MDFLD_DSI_PKG_DCS:
- cmd = pkg->pkg.dcs_pkg.cmd;
- break;
- case MDFLD_DSI_PKG_MCS_SHORT_WRITE_0:
- case MDFLD_DSI_PKG_MCS_SHORT_WRITE_1:
- cmd = pkg->pkg.short_pkg.cmd;
- break;
- case MDFLD_DSI_PKG_MCS_LONG_WRITE:
- data = (u8 *)pkg->pkg.long_pkg.data;
- cmd = *data;
- break;
- default:
- return 0;
- }
-
- /* This prevents other package sending while doing msleep */
- sender->status = MDFLD_DSI_PKG_SENDER_BUSY;
-
- /* Check panel mode v.s. sending command */
- if ((sender->panel_mode & MDFLD_DSI_PANEL_MODE_SLEEP) &&
- cmd != exit_sleep_mode) {
- dev_err(sender->dev->dev,
- "sending 0x%x when panel sleep in\n", cmd);
- sender->status = MDFLD_DSI_PKG_SENDER_FREE;
- return -EINVAL;
- }
-
- /* Wait for 120 milliseconds in case exit_sleep_mode just be sent */
- if (cmd == DCS_ENTER_SLEEP_MODE) {
- /*TODO: replace it with msleep later*/
- mdelay(120);
- }
- return 0;
-}
-
-static int send_pkg_done(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg)
-{
- u8 cmd;
- u8 *data;
-
- switch (pkg->pkg_type) {
- case MDFLD_DSI_PKG_DCS:
- cmd = pkg->pkg.dcs_pkg.cmd;
- break;
- case MDFLD_DSI_PKG_MCS_SHORT_WRITE_0:
- case MDFLD_DSI_PKG_MCS_SHORT_WRITE_1:
- cmd = pkg->pkg.short_pkg.cmd;
- break;
- case MDFLD_DSI_PKG_MCS_LONG_WRITE:
- data = (u8 *)pkg->pkg.long_pkg.data;
- cmd = *data;
- break;
- default:
- return 0;
- }
-
- /* Update panel status */
- if (cmd == DCS_ENTER_SLEEP_MODE) {
- sender->panel_mode |= MDFLD_DSI_PANEL_MODE_SLEEP;
- /*TODO: replace it with msleep later*/
- mdelay(120);
- } else if (cmd == DCS_EXIT_SLEEP_MODE) {
- sender->panel_mode &= ~MDFLD_DSI_PANEL_MODE_SLEEP;
- /*TODO: replace it with msleep later*/
- mdelay(120);
- } else if (unlikely(cmd == DCS_SOFT_RESET)) {
- /*TODO: replace it with msleep later*/
- mdelay(5);
- }
- sender->status = MDFLD_DSI_PKG_SENDER_FREE;
- return 0;
-
-}
-
-static int do_send_pkg(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg)
-{
- int ret;
-
- if (sender->status == MDFLD_DSI_PKG_SENDER_BUSY) {
- dev_err(sender->dev->dev, "sender is busy\n");
- return -EAGAIN;
- }
-
- ret = send_pkg_prepare(sender, pkg);
- if (ret) {
- dev_err(sender->dev->dev, "send_pkg_prepare error\n");
- return ret;
- }
-
- switch (pkg->pkg_type) {
- case MDFLD_DSI_PKG_DCS:
- ret = send_dcs_pkg(sender, pkg);
- break;
- case MDFLD_DSI_PKG_GEN_SHORT_WRITE_0:
- case MDFLD_DSI_PKG_GEN_SHORT_WRITE_1:
- case MDFLD_DSI_PKG_GEN_SHORT_WRITE_2:
- case MDFLD_DSI_PKG_GEN_READ_0:
- case MDFLD_DSI_PKG_GEN_READ_1:
- case MDFLD_DSI_PKG_GEN_READ_2:
- ret = send_gen_short_pkg(sender, pkg);
- break;
- case MDFLD_DSI_PKG_GEN_LONG_WRITE:
- ret = send_gen_long_pkg(sender, pkg);
- break;
- case MDFLD_DSI_PKG_MCS_SHORT_WRITE_0:
- case MDFLD_DSI_PKG_MCS_SHORT_WRITE_1:
- case MDFLD_DSI_PKG_MCS_READ:
- ret = send_mcs_short_pkg(sender, pkg);
- break;
- case MDFLD_DSI_PKG_MCS_LONG_WRITE:
- ret = send_mcs_long_pkg(sender, pkg);
- break;
- default:
- dev_err(sender->dev->dev, "Invalid pkg type 0x%x\n",
- pkg->pkg_type);
- ret = -EINVAL;
- }
- send_pkg_done(sender, pkg);
- return ret;
-}
-
-static int send_pkg(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg)
-{
- int err ;
-
- /* Handle DSI error */
- err = dsi_error_handler(sender);
- if (err) {
- dev_err(sender->dev->dev, "Error handling failed\n");
- err = -EAGAIN;
- goto send_pkg_err;
- }
-
- /* Send pkg */
- err = do_send_pkg(sender, pkg);
- if (err) {
- dev_err(sender->dev->dev, "sent pkg failed\n");
- err = -EAGAIN;
- goto send_pkg_err;
- }
-
- /* FIXME: should I query complete and fifo empty here? */
-send_pkg_err:
- return err;
-}
-
-static struct mdfld_dsi_pkg *pkg_sender_get_pkg_locked(
- struct mdfld_dsi_pkg_sender *sender)
-{
- struct mdfld_dsi_pkg *pkg;
-
- if (list_empty(&sender->free_list)) {
- dev_err(sender->dev->dev, "No free pkg left\n");
- return NULL;
- }
- pkg = list_first_entry(&sender->free_list, struct mdfld_dsi_pkg, entry);
- /* Detach from free list */
- list_del_init(&pkg->entry);
- return pkg;
-}
-
-static void pkg_sender_put_pkg_locked(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg)
-{
- memset(pkg, 0, sizeof(struct mdfld_dsi_pkg));
- INIT_LIST_HEAD(&pkg->entry);
- list_add_tail(&pkg->entry, &sender->free_list);
-}
-
-static int mdfld_dbi_cb_init(struct mdfld_dsi_pkg_sender *sender,
- struct psb_gtt *pg, int pipe)
-{
- unsigned long phys;
- void *virt_addr = NULL;
-
- switch (pipe) {
- case 0:
- /* FIXME: Doesn't this collide with stolen space ? */
- phys = pg->gtt_phys_start - 0x1000;
- break;
- case 2:
- phys = pg->gtt_phys_start - 0x800;
- break;
- default:
- dev_err(sender->dev->dev, "Unsupported channel %d\n", pipe);
- return -EINVAL;
- }
-
- virt_addr = ioremap_nocache(phys, 0x800);
- if (!virt_addr) {
- dev_err(sender->dev->dev, "Map DBI command buffer error\n");
- return -ENOMEM;
- }
- sender->dbi_cb_phy = phys;
- sender->dbi_cb_addr = virt_addr;
- return 0;
-}
-
-static void mdfld_dbi_cb_destroy(struct mdfld_dsi_pkg_sender *sender)
-{
- if (sender && sender->dbi_cb_addr)
- iounmap(sender->dbi_cb_addr);
-}
-
-static void pkg_sender_queue_pkg(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg,
- int delay)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&sender->lock, flags);
-
- if (!delay) {
- send_pkg(sender, pkg);
- pkg_sender_put_pkg_locked(sender, pkg);
- } else {
- /* Queue it */
- list_add_tail(&pkg->entry, &sender->pkg_list);
- }
- spin_unlock_irqrestore(&sender->lock, flags);
-}
-
-static void process_pkg_list(struct mdfld_dsi_pkg_sender *sender)
-{
- struct mdfld_dsi_pkg *pkg;
- unsigned long flags;
-
- spin_lock_irqsave(&sender->lock, flags);
-
- while (!list_empty(&sender->pkg_list)) {
- pkg = list_first_entry(&sender->pkg_list,
- struct mdfld_dsi_pkg, entry);
- send_pkg(sender, pkg);
- list_del_init(&pkg->entry);
- pkg_sender_put_pkg_locked(sender, pkg);
- }
-
- spin_unlock_irqrestore(&sender->lock, flags);
-}
-
-static int mdfld_dsi_send_mcs_long(struct mdfld_dsi_pkg_sender *sender,
- u32 *data, u32 len, u8 transmission, int delay)
-{
- struct mdfld_dsi_pkg *pkg;
- unsigned long flags;
-
- spin_lock_irqsave(&sender->lock, flags);
- pkg = pkg_sender_get_pkg_locked(sender);
- spin_unlock_irqrestore(&sender->lock, flags);
-
- if (!pkg) {
- dev_err(sender->dev->dev, "No memory\n");
- return -ENOMEM;
- }
- pkg->pkg_type = MDFLD_DSI_PKG_MCS_LONG_WRITE;
- pkg->transmission_type = transmission;
- pkg->pkg.long_pkg.data = data;
- pkg->pkg.long_pkg.len = len;
- INIT_LIST_HEAD(&pkg->entry);
-
- pkg_sender_queue_pkg(sender, pkg, delay);
- return 0;
-}
-
-static int mdfld_dsi_send_mcs_short(struct mdfld_dsi_pkg_sender *sender,
- u8 cmd, u8 param, u8 param_num,
- u8 transmission,
- int delay)
-{
- struct mdfld_dsi_pkg *pkg;
- unsigned long flags;
-
- spin_lock_irqsave(&sender->lock, flags);
- pkg = pkg_sender_get_pkg_locked(sender);
- spin_unlock_irqrestore(&sender->lock, flags);
-
- if (!pkg) {
- dev_err(sender->dev->dev, "No memory\n");
- return -ENOMEM;
- }
-
- if (param_num) {
- pkg->pkg_type = MDFLD_DSI_PKG_MCS_SHORT_WRITE_1;
- pkg->pkg.short_pkg.param = param;
- } else {
- pkg->pkg_type = MDFLD_DSI_PKG_MCS_SHORT_WRITE_0;
- pkg->pkg.short_pkg.param = 0;
- }
- pkg->transmission_type = transmission;
- pkg->pkg.short_pkg.cmd = cmd;
- INIT_LIST_HEAD(&pkg->entry);
-
- pkg_sender_queue_pkg(sender, pkg, delay);
- return 0;
-}
-
-static int mdfld_dsi_send_gen_short(struct mdfld_dsi_pkg_sender *sender,
- u8 param0, u8 param1, u8 param_num,
- u8 transmission,
- int delay)
-{
- struct mdfld_dsi_pkg *pkg;
- unsigned long flags;
-
- spin_lock_irqsave(&sender->lock, flags);
- pkg = pkg_sender_get_pkg_locked(sender);
- spin_unlock_irqrestore(&sender->lock, flags);
-
- if (!pkg) {
- dev_err(sender->dev->dev, "No pkg memory\n");
- return -ENOMEM;
- }
-
- switch (param_num) {
- case 0:
- pkg->pkg_type = MDFLD_DSI_PKG_GEN_SHORT_WRITE_0;
- pkg->pkg.short_pkg.cmd = 0;
- pkg->pkg.short_pkg.param = 0;
- break;
- case 1:
- pkg->pkg_type = MDFLD_DSI_PKG_GEN_SHORT_WRITE_1;
- pkg->pkg.short_pkg.cmd = param0;
- pkg->pkg.short_pkg.param = 0;
- break;
- case 2:
- pkg->pkg_type = MDFLD_DSI_PKG_GEN_SHORT_WRITE_2;
- pkg->pkg.short_pkg.cmd = param0;
- pkg->pkg.short_pkg.param = param1;
- break;
- }
-
- pkg->transmission_type = transmission;
- INIT_LIST_HEAD(&pkg->entry);
-
- pkg_sender_queue_pkg(sender, pkg, delay);
- return 0;
-}
-
-static int mdfld_dsi_send_gen_long(struct mdfld_dsi_pkg_sender *sender,
- u32 *data, u32 len, u8 transmission, int delay)
-{
- struct mdfld_dsi_pkg *pkg;
- unsigned long flags;
-
- spin_lock_irqsave(&sender->lock, flags);
- pkg = pkg_sender_get_pkg_locked(sender);
- spin_unlock_irqrestore(&sender->lock, flags);
-
- if (!pkg) {
- dev_err(sender->dev->dev, "No pkg memory\n");
- return -ENOMEM;
- }
-
- pkg->pkg_type = MDFLD_DSI_PKG_GEN_LONG_WRITE;
- pkg->transmission_type = transmission;
- pkg->pkg.long_pkg.data = data;
- pkg->pkg.long_pkg.len = len;
-
- INIT_LIST_HEAD(&pkg->entry);
-
- pkg_sender_queue_pkg(sender, pkg, delay);
-
- return 0;
-}
-
-static int __read_panel_data(struct mdfld_dsi_pkg_sender *sender,
- struct mdfld_dsi_pkg *pkg,
- u32 *data,
- u16 len)
-{
- unsigned long flags;
- struct drm_device *dev = sender->dev;
- int i;
- u32 gen_data_reg;
- int retry = MDFLD_DSI_READ_MAX_COUNT;
- u8 transmission = pkg->transmission_type;
-
- /*
- * do reading.
- * 0) send out generic read request
- * 1) polling read data avail interrupt
- * 2) read data
- */
- spin_lock_irqsave(&sender->lock, flags);
-
- REG_WRITE(sender->mipi_intr_stat_reg, 1 << 29);
-
- if ((REG_READ(sender->mipi_intr_stat_reg) & (1 << 29)))
- DRM_ERROR("Can NOT clean read data valid interrupt\n");
-
- /*send out read request*/
- send_pkg(sender, pkg);
-
- pkg_sender_put_pkg_locked(sender, pkg);
-
- /*polling read data avail interrupt*/
- while (retry && !(REG_READ(sender->mipi_intr_stat_reg) & (1 << 29))) {
- udelay(100);
- retry--;
- }
-
- if (!retry) {
- spin_unlock_irqrestore(&sender->lock, flags);
- return -ETIMEDOUT;
- }
-
- REG_WRITE(sender->mipi_intr_stat_reg, (1 << 29));
-
- /*read data*/
- if (transmission == MDFLD_DSI_HS_TRANSMISSION)
- gen_data_reg = sender->mipi_hs_gen_data_reg;
- else if (transmission == MDFLD_DSI_LP_TRANSMISSION)
- gen_data_reg = sender->mipi_lp_gen_data_reg;
- else {
- DRM_ERROR("Unknown transmission");
- spin_unlock_irqrestore(&sender->lock, flags);
- return -EINVAL;
- }
-
- for (i=0; i<len; i++)
- *(data + i) = REG_READ(gen_data_reg);
-
- spin_unlock_irqrestore(&sender->lock, flags);
-
- return 0;
-}
-
-static int mdfld_dsi_read_gen(struct mdfld_dsi_pkg_sender *sender,
- u8 param0,
- u8 param1,
- u8 param_num,
- u32 *data,
- u16 len,
- u8 transmission)
-{
- struct mdfld_dsi_pkg *pkg;
- unsigned long flags;
-
- spin_lock_irqsave(&sender->lock, flags);
-
- pkg = pkg_sender_get_pkg_locked(sender);
-
- spin_unlock_irqrestore(&sender->lock,flags);
-
- if (!pkg) {
- dev_err(sender->dev->dev, "No pkg memory\n");
- return -ENOMEM;
- }
-
- switch (param_num) {
- case 0:
- pkg->pkg_type = MDFLD_DSI_PKG_GEN_READ_0;
- pkg->pkg.short_pkg.cmd = 0;
- pkg->pkg.short_pkg.param = 0;
- break;
- case 1:
- pkg->pkg_type = MDFLD_DSI_PKG_GEN_READ_1;
- pkg->pkg.short_pkg.cmd = param0;
- pkg->pkg.short_pkg.param = 0;
- break;
- case 2:
- pkg->pkg_type = MDFLD_DSI_PKG_GEN_READ_2;
- pkg->pkg.short_pkg.cmd = param0;
- pkg->pkg.short_pkg.param = param1;
- break;
- }
-
- pkg->transmission_type = transmission;
-
- INIT_LIST_HEAD(&pkg->entry);
-
- return __read_panel_data(sender, pkg, data, len);
-}
-
-static int mdfld_dsi_read_mcs(struct mdfld_dsi_pkg_sender *sender,
- u8 cmd,
- u32 *data,
- u16 len,
- u8 transmission)
-{
- struct mdfld_dsi_pkg *pkg;
- unsigned long flags;
-
- spin_lock_irqsave(&sender->lock, flags);
-
- pkg = pkg_sender_get_pkg_locked(sender);
-
- spin_unlock_irqrestore(&sender->lock, flags);
-
- if (!pkg) {
- dev_err(sender->dev->dev, "No pkg memory\n");
- return -ENOMEM;
- }
-
- pkg->pkg_type = MDFLD_DSI_PKG_MCS_READ;
- pkg->pkg.short_pkg.cmd = cmd;
- pkg->pkg.short_pkg.param = 0;
-
- pkg->transmission_type = transmission;
-
- INIT_LIST_HEAD(&pkg->entry);
-
- return __read_panel_data(sender, pkg, data, len);
-}
-
-void dsi_controller_dbi_init(struct mdfld_dsi_config * dsi_config, int pipe)
-{
- struct drm_device * dev = dsi_config->dev;
- u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0;
- int lane_count = dsi_config->lane_count;
- u32 val = 0;
-
- /*un-ready device*/
- REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000);
-
- /*init dsi adapter before kicking off*/
- REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018);
-
- /*TODO: figure out how to setup these registers*/
- REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408);
- REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), 0x000a0014);
- REG_WRITE((MIPIA_DBI_BW_CTRL_REG + reg_offset), 0x00000400);
- REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000001);
- REG_WRITE((MIPIA_HS_LS_DBI_ENABLE_REG + reg_offset), 0x00000000);
-
- /*enable all interrupts*/
- REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff);
- /*max value: 20 clock cycles of txclkesc*/
- REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x0000001f);
- /*min 21 txclkesc, max: ffffh*/
- REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0x0000ffff);
- /*min: 7d0 max: 4e20*/
- REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x00000fa0);
-
- /*set up max return packet size*/
- REG_WRITE((MIPIA_MAX_RETURN_PACK_SIZE_REG + reg_offset),
- MDFLD_DSI_MAX_RETURN_PACKET_SIZE);
-
- /*set up func_prg*/
- val |= lane_count;
- val |= (dsi_config->channel_num << DSI_DBI_VIRT_CHANNEL_OFFSET);
- val |= DSI_DBI_COLOR_FORMAT_OPTION2;
- REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val);
-
- REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), 0x3fffff);
- REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff);
-
- REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46);
- REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000000);
- REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004);
- REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001);
-}
-
-void dsi_controller_dpi_init(struct mdfld_dsi_config * dsi_config, int pipe)
-{
- struct drm_device * dev = dsi_config->dev;
- u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0;
- int lane_count = dsi_config->lane_count;
- struct mdfld_dsi_dpi_timing dpi_timing;
- struct drm_display_mode * mode = dsi_config->mode;
- u32 val = 0;
-
- /*un-ready device*/
- REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000);
-
- /*init dsi adapter before kicking off*/
- REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018);
-
- /*enable all interrupts*/
- REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff);
-
- /*set up func_prg*/
- val |= lane_count;
- val |= dsi_config->channel_num << DSI_DPI_VIRT_CHANNEL_OFFSET;
-
- switch(dsi_config->bpp) {
- case 16:
- val |= DSI_DPI_COLOR_FORMAT_RGB565;
- break;
- case 18:
- val |= DSI_DPI_COLOR_FORMAT_RGB666;
- break;
- case 24:
- val |= DSI_DPI_COLOR_FORMAT_RGB888;
- break;
- default:
- DRM_ERROR("unsupported color format, bpp = %d\n", dsi_config->bpp);
- }
-
- REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val);
-
- REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset),
- (mode->vtotal * mode->htotal * dsi_config->bpp / (8 * lane_count)) & DSI_HS_TX_TIMEOUT_MASK);
- REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff & DSI_LP_RX_TIMEOUT_MASK);
-
- /*max value: 20 clock cycles of txclkesc*/
- REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x14 & DSI_TURN_AROUND_TIMEOUT_MASK);
-
- /*min 21 txclkesc, max: ffffh*/
- REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0xffff & DSI_RESET_TIMER_MASK);
-
- REG_WRITE((MIPIA_DPI_RESOLUTION_REG + reg_offset), mode->vdisplay << 16 | mode->hdisplay);
-
- /*set DPI timing registers*/
- mdfld_dsi_dpi_timing_calculation(mode, &dpi_timing, dsi_config->lane_count, dsi_config->bpp);
-
- REG_WRITE((MIPIA_HSYNC_COUNT_REG + reg_offset), dpi_timing.hsync_count & DSI_DPI_TIMING_MASK);
- REG_WRITE((MIPIA_HBP_COUNT_REG + reg_offset), dpi_timing.hbp_count & DSI_DPI_TIMING_MASK);
- REG_WRITE((MIPIA_HFP_COUNT_REG + reg_offset), dpi_timing.hfp_count & DSI_DPI_TIMING_MASK);
- REG_WRITE((MIPIA_HACTIVE_COUNT_REG + reg_offset), dpi_timing.hactive_count & DSI_DPI_TIMING_MASK);
- REG_WRITE((MIPIA_VSYNC_COUNT_REG + reg_offset), dpi_timing.vsync_count & DSI_DPI_TIMING_MASK);
- REG_WRITE((MIPIA_VBP_COUNT_REG + reg_offset), dpi_timing.vbp_count & DSI_DPI_TIMING_MASK);
- REG_WRITE((MIPIA_VFP_COUNT_REG + reg_offset), dpi_timing.vfp_count & DSI_DPI_TIMING_MASK);
-
- REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46);
-
- /*min: 7d0 max: 4e20*/
- REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x000007d0);
-
- /*set up video mode*/
- val = dsi_config->video_mode | DSI_DPI_COMPLETE_LAST_LINE;
- REG_WRITE((MIPIA_VIDEO_MODE_FORMAT_REG + reg_offset), val);
-
- REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000000);
-
- REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004);
-
- /*TODO: figure out how to setup these registers*/
- REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408);
-
- REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), (0xa << 16) | 0x14);
-
- /*set device ready*/
- REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001);
-}
-
-static void dsi_controller_init(struct mdfld_dsi_config * dsi_config, int pipe)
-{
- if (!dsi_config || ((pipe != 0) && (pipe != 2))) {
- DRM_ERROR("Invalid parameters\n");
- return;
- }
-
- if (dsi_config->type == MDFLD_DSI_ENCODER_DPI)
- dsi_controller_dpi_init(dsi_config, pipe);
- else if (dsi_config->type == MDFLD_DSI_ENCODER_DBI)
- dsi_controller_dbi_init(dsi_config, pipe);
- else
- DRM_ERROR("Bad DSI encoder type\n");
-}
-
-void mdfld_dsi_cmds_kick_out(struct mdfld_dsi_pkg_sender *sender)
-{
- process_pkg_list(sender);
-}
-
-int mdfld_dsi_send_dcs(struct mdfld_dsi_pkg_sender *sender,
- u8 dcs, u8 *param, u32 param_num, u8 data_src,
- int delay)
-{
- struct mdfld_dsi_pkg *pkg;
- u32 cb_phy = sender->dbi_cb_phy;
- struct drm_device *dev = sender->dev;
- u32 index = 0;
- u8 *cb = (u8 *)sender->dbi_cb_addr;
- unsigned long flags;
- int retry;
- u8 *dst = NULL;
- u32 len;
-
- if (!sender) {
- WARN_ON(1);
- return -EINVAL;
- }
-
- if (!sender->dbi_pkg_support) {
- dev_err(dev->dev, "No DBI pkg sending on this sender\n");
- return -ENOTSUPP;
- }
-
- if (param_num > MDFLD_MAX_DCS_PARAM) {
- dev_err(dev->dev, "Sender only supports up to %d DCS params\n",
- MDFLD_MAX_DCS_PARAM);
- return -EINVAL;
- }
-
- /*
- * If dcs is write_mem_start, send it directly using DSI adapter
- * interface
- */
- if (dcs == DCS_WRITE_MEM_START) {
- if (!spin_trylock(&sender->lock))
- return -EAGAIN;
-
- /*
- * query whether DBI FIFO is empty,
- * if not wait it becoming empty
- */
- retry = MDFLD_DSI_DBI_FIFO_TIMEOUT;
- while (retry &&
- !(REG_READ(sender->mipi_gen_fifo_stat_reg) & (1 << 27))) {
- udelay(500);
- retry--;
- }
-
- /* If DBI FIFO timeout, drop this frame */
- if (!retry) {
- spin_unlock(&sender->lock);
- return 0;
- }
-
- *(cb + (index++)) = write_mem_start;
-
- REG_WRITE(sender->mipi_cmd_len_reg, 1);
- REG_WRITE(sender->mipi_cmd_addr_reg,
- cb_phy | (1 << 0) | (1 << 1));
-
- retry = MDFLD_DSI_DBI_FIFO_TIMEOUT;
- while (retry &&
- (REG_READ(sender->mipi_cmd_addr_reg) & (1 << 0))) {
- udelay(1);
- retry--;
- }
-
- spin_unlock(&sender->lock);
- return 0;
- }
-
- /* Get a free pkg */
- spin_lock_irqsave(&sender->lock, flags);
- pkg = pkg_sender_get_pkg_locked(sender);
- spin_unlock_irqrestore(&sender->lock, flags);
-
- if (!pkg) {
- dev_err(dev->dev, "No packages memory\n");
- return -ENOMEM;
- }
-
- dst = pkg->pkg.dcs_pkg.param;
- memcpy(dst, param, param_num);
-
- pkg->pkg_type = MDFLD_DSI_PKG_DCS;
- pkg->transmission_type = MDFLD_DSI_DCS;
- pkg->pkg.dcs_pkg.cmd = dcs;
- pkg->pkg.dcs_pkg.param_num = param_num;
- pkg->pkg.dcs_pkg.data_src = data_src;
-
- INIT_LIST_HEAD(&pkg->entry);
-
- if (param_num == 0)
- return mdfld_dsi_send_mcs_short_hs(sender, dcs, 0, 0, delay);
- else if (param_num == 1)
- return mdfld_dsi_send_mcs_short_hs(sender, dcs,
- param[0], 1, delay);
- else if (param_num > 1) {
- len = (param_num + 1) / 4;
- if ((param_num + 1) % 4)
- len++;
- return mdfld_dsi_send_mcs_long_hs(sender,
- (u32 *)&pkg->pkg.dcs_pkg, len, delay);
- }
- return 0;
-}
-
-int mdfld_dsi_send_mcs_short_hs(struct mdfld_dsi_pkg_sender *sender,
- u8 cmd, u8 param, u8 param_num, int delay)
-{
- if (!sender) {
- WARN_ON(1);
- return -EINVAL;
- }
- return mdfld_dsi_send_mcs_short(sender, cmd, param, param_num,
- MDFLD_DSI_HS_TRANSMISSION, delay);
-}
-
-int mdfld_dsi_send_mcs_short_lp(struct mdfld_dsi_pkg_sender *sender,
- u8 cmd, u8 param, u8 param_num, int delay)
-{
- if (!sender) {
- WARN_ON(1);
- return -EINVAL;
- }
- return mdfld_dsi_send_mcs_short(sender, cmd, param, param_num,
- MDFLD_DSI_LP_TRANSMISSION, delay);
-}
-
-int mdfld_dsi_send_mcs_long_hs(struct mdfld_dsi_pkg_sender *sender,
- u32 *data,
- u32 len,
- int delay)
-{
- if (!sender || !data || !len) {
- DRM_ERROR("Invalid parameters\n");
- return -EINVAL;
- }
- return mdfld_dsi_send_mcs_long(sender, data, len,
- MDFLD_DSI_HS_TRANSMISSION, delay);
-}
-
-int mdfld_dsi_send_mcs_long_lp(struct mdfld_dsi_pkg_sender *sender,
- u32 *data,
- u32 len,
- int delay)
-{
- if (!sender || !data || !len) {
- WARN_ON(1);
- return -EINVAL;
- }
- return mdfld_dsi_send_mcs_long(sender, data, len,
- MDFLD_DSI_LP_TRANSMISSION, delay);
-}
-
-int mdfld_dsi_send_gen_short_hs(struct mdfld_dsi_pkg_sender *sender,
- u8 param0, u8 param1, u8 param_num, int delay)
-{
- if (!sender) {
- WARN_ON(1);
- return -EINVAL;
- }
- return mdfld_dsi_send_gen_short(sender, param0, param1, param_num,
- MDFLD_DSI_HS_TRANSMISSION, delay);
-}
-
-int mdfld_dsi_send_gen_short_lp(struct mdfld_dsi_pkg_sender *sender,
- u8 param0, u8 param1, u8 param_num, int delay)
-{
- if (!sender || param_num < 0 || param_num > 2) {
- WARN_ON(1);
- return -EINVAL;
- }
- return mdfld_dsi_send_gen_short(sender, param0, param1, param_num,
- MDFLD_DSI_LP_TRANSMISSION, delay);
-}
-
-int mdfld_dsi_send_gen_long_hs(struct mdfld_dsi_pkg_sender *sender,
- u32 *data,
- u32 len,
- int delay)
-{
- if (!sender || !data || !len) {
- WARN_ON(1);
- return -EINVAL;
- }
- return mdfld_dsi_send_gen_long(sender, data, len,
- MDFLD_DSI_HS_TRANSMISSION, delay);
-}
-
-int mdfld_dsi_send_gen_long_lp(struct mdfld_dsi_pkg_sender *sender,
- u32 *data,
- u32 len,
- int delay)
-{
- if (!sender || !data || !len) {
- WARN_ON(1);
- return -EINVAL;
- }
- return mdfld_dsi_send_gen_long(sender, data, len,
- MDFLD_DSI_LP_TRANSMISSION, delay);
-}
-
-int mdfld_dsi_read_gen_hs(struct mdfld_dsi_pkg_sender *sender,
- u8 param0,
- u8 param1,
- u8 param_num,
- u32 *data,
- u16 len)
-{
- if (!sender || !data || param_num < 0 || param_num > 2
- || !data || !len) {
- DRM_ERROR("Invalid parameters\n");
- return -EINVAL;
- }
-
- return mdfld_dsi_read_gen(sender, param0, param1, param_num,
- data, len, MDFLD_DSI_HS_TRANSMISSION);
-
-}
-
-int mdfld_dsi_read_gen_lp(struct mdfld_dsi_pkg_sender *sender,
- u8 param0,
- u8 param1,
- u8 param_num,
- u32 *data,
- u16 len)
-{
- if (!sender || !data || param_num < 0 || param_num > 2
- || !data || !len) {
- DRM_ERROR("Invalid parameters\n");
- return -EINVAL;
- }
-
- return mdfld_dsi_read_gen(sender, param0, param1, param_num,
- data, len, MDFLD_DSI_LP_TRANSMISSION);
-}
-
-int mdfld_dsi_read_mcs_hs(struct mdfld_dsi_pkg_sender *sender,
- u8 cmd,
- u32 *data,
- u16 len)
-{
- if (!sender || !data || !len) {
- DRM_ERROR("Invalid parameters\n");
- return -EINVAL;
- }
-
- return mdfld_dsi_read_mcs(sender, cmd, data, len,
- MDFLD_DSI_HS_TRANSMISSION);
-}
-
-int mdfld_dsi_read_mcs_lp(struct mdfld_dsi_pkg_sender *sender,
- u8 cmd,
- u32 *data,
- u16 len)
-{
- if (!sender || !data || !len) {
- WARN_ON(1);
- return -EINVAL;
- }
-
- return mdfld_dsi_read_mcs(sender, cmd, data, len,
- MDFLD_DSI_LP_TRANSMISSION);
-}
-
-int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector,
- int pipe)
-{
- int ret;
- struct mdfld_dsi_pkg_sender *pkg_sender;
- struct mdfld_dsi_config *dsi_config =
- mdfld_dsi_get_config(dsi_connector);
- struct drm_device *dev = dsi_config->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_gtt *pg = &dev_priv->gtt;
- int i;
- struct mdfld_dsi_pkg *pkg, *tmp;
- u32 mipi_val = 0;
-
- if (!dsi_connector) {
- WARN_ON(1);
- return -EINVAL;
- }
-
- pkg_sender = dsi_connector->pkg_sender;
-
- if (!pkg_sender || IS_ERR(pkg_sender)) {
- pkg_sender = kzalloc(sizeof(struct mdfld_dsi_pkg_sender),
- GFP_KERNEL);
- if (!pkg_sender) {
- dev_err(dev->dev, "Create DSI pkg sender failed\n");
- return -ENOMEM;
- }
-
- dsi_connector->pkg_sender = (void *)pkg_sender;
- }
-
- pkg_sender->dev = dev;
- pkg_sender->dsi_connector = dsi_connector;
- pkg_sender->pipe = pipe;
- pkg_sender->pkg_num = 0;
- pkg_sender->panel_mode = 0;
- pkg_sender->status = MDFLD_DSI_PKG_SENDER_FREE;
-
- /* Init dbi command buffer*/
-
- if (dsi_config->type == MDFLD_DSI_ENCODER_DBI) {
- pkg_sender->dbi_pkg_support = 1;
- ret = mdfld_dbi_cb_init(pkg_sender, pg, pipe);
- if (ret) {
- dev_err(dev->dev, "DBI command buffer map failed\n");
- goto mapping_err;
- }
- }
-
- /* Init regs */
- if (pipe == 0) {
- pkg_sender->dpll_reg = MRST_DPLL_A;
- pkg_sender->dspcntr_reg = DSPACNTR;
- pkg_sender->pipeconf_reg = PIPEACONF;
- pkg_sender->dsplinoff_reg = DSPALINOFF;
- pkg_sender->dspsurf_reg = DSPASURF;
- pkg_sender->pipestat_reg = PIPEASTAT;
-
- pkg_sender->mipi_intr_stat_reg = MIPIA_INTR_STAT_REG;
- pkg_sender->mipi_lp_gen_data_reg = MIPIA_LP_GEN_DATA_REG;
- pkg_sender->mipi_hs_gen_data_reg = MIPIA_HS_GEN_DATA_REG;
- pkg_sender->mipi_lp_gen_ctrl_reg = MIPIA_LP_GEN_CTRL_REG;
- pkg_sender->mipi_hs_gen_ctrl_reg = MIPIA_HS_GEN_CTRL_REG;
- pkg_sender->mipi_gen_fifo_stat_reg = MIPIA_GEN_FIFO_STAT_REG;
- pkg_sender->mipi_data_addr_reg = MIPIA_DATA_ADD_REG;
- pkg_sender->mipi_data_len_reg = MIPIA_DATA_LEN_REG;
- pkg_sender->mipi_cmd_addr_reg = MIPIA_CMD_ADD_REG;
- pkg_sender->mipi_cmd_len_reg = MIPIA_CMD_LEN_REG;
- } else if (pipe == 2) {
- pkg_sender->dpll_reg = MRST_DPLL_A;
- pkg_sender->dspcntr_reg = DSPCCNTR;
- pkg_sender->pipeconf_reg = PIPECCONF;
- pkg_sender->dsplinoff_reg = DSPCLINOFF;
- pkg_sender->dspsurf_reg = DSPCSURF;
- pkg_sender->pipestat_reg = PIPECSTAT;
-
- pkg_sender->mipi_intr_stat_reg =
- MIPIA_INTR_STAT_REG + MIPIC_REG_OFFSET;
- pkg_sender->mipi_lp_gen_data_reg =
- MIPIA_LP_GEN_DATA_REG + MIPIC_REG_OFFSET;
- pkg_sender->mipi_hs_gen_data_reg =
- MIPIA_HS_GEN_DATA_REG + MIPIC_REG_OFFSET;
- pkg_sender->mipi_lp_gen_ctrl_reg =
- MIPIA_LP_GEN_CTRL_REG + MIPIC_REG_OFFSET;
- pkg_sender->mipi_hs_gen_ctrl_reg =
- MIPIA_HS_GEN_CTRL_REG + MIPIC_REG_OFFSET;
- pkg_sender->mipi_gen_fifo_stat_reg =
- MIPIA_GEN_FIFO_STAT_REG + MIPIC_REG_OFFSET;
- pkg_sender->mipi_data_addr_reg =
- MIPIA_DATA_ADD_REG + MIPIC_REG_OFFSET;
- pkg_sender->mipi_data_len_reg =
- MIPIA_DATA_LEN_REG + MIPIC_REG_OFFSET;
- pkg_sender->mipi_cmd_addr_reg =
- MIPIA_CMD_ADD_REG + MIPIC_REG_OFFSET;
- pkg_sender->mipi_cmd_len_reg =
- MIPIA_CMD_LEN_REG + MIPIC_REG_OFFSET;
- }
-
- /* Init pkg list */
- INIT_LIST_HEAD(&pkg_sender->pkg_list);
- INIT_LIST_HEAD(&pkg_sender->free_list);
-
- spin_lock_init(&pkg_sender->lock);
-
- /* Allocate free pkg pool */
- for (i = 0; i < MDFLD_MAX_PKG_NUM; i++) {
- pkg = kzalloc(sizeof(struct mdfld_dsi_pkg), GFP_KERNEL);
- if (!pkg) {
- dev_err(dev->dev, "Out of memory allocating pkg pool");
- ret = -ENOMEM;
- goto pkg_alloc_err;
- }
- INIT_LIST_HEAD(&pkg->entry);
- list_add_tail(&pkg->entry, &pkg_sender->free_list);
- }
-
- /*
- * For video mode, don't enable DPI timing output here,
- * will init the DPI timing output during mode setting.
- */
- if (dsi_config->type == MDFLD_DSI_ENCODER_DPI)
- mipi_val = PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX;
- else if (dsi_config->type == MDFLD_DSI_ENCODER_DBI)
- mipi_val = PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX
- | TE_TRIGGER_GPIO_PIN;
- else
- DRM_ERROR("Bad DSI encoder type\n");
-
- if (pipe == 0) {
- mipi_val |= 0x2;
- REG_WRITE(MIPI, mipi_val);
- REG_READ(MIPI);
- } else if (pipe == 2) {
- REG_WRITE(MIPI_C, mipi_val);
- REG_READ(MIPI_C);
- }
-
- /*do dsi controller init*/
- dsi_controller_init(dsi_config, pipe);
-
- return 0;
-
-pkg_alloc_err:
- list_for_each_entry_safe(pkg, tmp, &pkg_sender->free_list, entry) {
- list_del(&pkg->entry);
- kfree(pkg);
- }
-
- /* Free mapped command buffer */
- mdfld_dbi_cb_destroy(pkg_sender);
-mapping_err:
- kfree(pkg_sender);
- dsi_connector->pkg_sender = NULL;
- return ret;
-}
-
-void mdfld_dsi_pkg_sender_destroy(struct mdfld_dsi_pkg_sender *sender)
-{
- struct mdfld_dsi_pkg *pkg, *tmp;
-
- if (!sender || IS_ERR(sender))
- return;
-
- /* Free pkg pool */
- list_for_each_entry_safe(pkg, tmp, &sender->free_list, entry) {
- list_del(&pkg->entry);
- kfree(pkg);
- }
- /* Free pkg list */
- list_for_each_entry_safe(pkg, tmp, &sender->pkg_list, entry) {
- list_del(&pkg->entry);
- kfree(pkg);
- }
- mdfld_dbi_cb_destroy(sender); /* free mapped command buffer */
- kfree(sender);
-}
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Jackie Li<yaodong.li@intel.com>
- */
-#ifndef __MDFLD_DSI_PKG_SENDER_H__
-#define __MDFLD_DSI_PKG_SENDER_H__
-
-#include <linux/kthread.h>
-
-#define MDFLD_MAX_DCS_PARAM 8
-#define MDFLD_MAX_PKG_NUM 2048
-
-enum {
- MDFLD_DSI_PKG_DCS,
- MDFLD_DSI_PKG_GEN_SHORT_WRITE_0 = 0x03,
- MDFLD_DSI_PKG_GEN_SHORT_WRITE_1 = 0x13,
- MDFLD_DSI_PKG_GEN_SHORT_WRITE_2 = 0x23,
- MDFLD_DSI_PKG_GEN_READ_0 = 0x04,
- MDFLD_DSI_PKG_GEN_READ_1 = 0x14,
- MDFLD_DSI_PKG_GEN_READ_2 = 0x24,
- MDFLD_DSI_PKG_GEN_LONG_WRITE = 0x29,
- MDFLD_DSI_PKG_MCS_SHORT_WRITE_0 = 0x05,
- MDFLD_DSI_PKG_MCS_SHORT_WRITE_1 = 0x15,
- MDFLD_DSI_PKG_MCS_READ = 0x06,
- MDFLD_DSI_PKG_MCS_LONG_WRITE = 0x39,
-};
-
-enum {
- MDFLD_DSI_LP_TRANSMISSION,
- MDFLD_DSI_HS_TRANSMISSION,
- MDFLD_DSI_DCS,
-};
-
-enum {
- MDFLD_DSI_PANEL_MODE_SLEEP = 0x1,
-};
-
-enum {
- MDFLD_DSI_PKG_SENDER_FREE = 0x0,
- MDFLD_DSI_PKG_SENDER_BUSY = 0x1,
-};
-
-enum {
- MDFLD_DSI_SEND_PACKAGE,
- MDFLD_DSI_QUEUE_PACKAGE,
-};
-
-struct mdfld_dsi_gen_short_pkg {
- u8 cmd;
- u8 param;
-};
-
-struct mdfld_dsi_gen_long_pkg {
- u32 *data;
- u32 len;
-};
-
-struct mdfld_dsi_dcs_pkg {
- u8 cmd;
- u8 param[MDFLD_MAX_DCS_PARAM];
- u32 param_num;
- u8 data_src;
-};
-
-struct mdfld_dsi_pkg {
- u8 pkg_type;
- u8 transmission_type;
-
- union {
- struct mdfld_dsi_gen_short_pkg short_pkg;
- struct mdfld_dsi_gen_long_pkg long_pkg;
- struct mdfld_dsi_dcs_pkg dcs_pkg;
- } pkg;
-
- struct list_head entry;
-};
-
-struct mdfld_dsi_pkg_sender {
- struct drm_device *dev;
- struct mdfld_dsi_connector *dsi_connector;
- u32 status;
-
- u32 panel_mode;
-
- int pipe;
-
- spinlock_t lock;
- struct list_head pkg_list;
- struct list_head free_list;
-
- u32 pkg_num;
-
- int dbi_pkg_support;
-
- u32 dbi_cb_phy;
- void *dbi_cb_addr;
-
- /* Registers */
- u32 dpll_reg;
- u32 dspcntr_reg;
- u32 pipeconf_reg;
- u32 pipestat_reg;
- u32 dsplinoff_reg;
- u32 dspsurf_reg;
-
- u32 mipi_intr_stat_reg;
- u32 mipi_lp_gen_data_reg;
- u32 mipi_hs_gen_data_reg;
- u32 mipi_lp_gen_ctrl_reg;
- u32 mipi_hs_gen_ctrl_reg;
- u32 mipi_gen_fifo_stat_reg;
- u32 mipi_data_addr_reg;
- u32 mipi_data_len_reg;
- u32 mipi_cmd_addr_reg;
- u32 mipi_cmd_len_reg;
-};
-
-/* DCS definitions */
-#define DCS_SOFT_RESET 0x01
-#define DCS_ENTER_SLEEP_MODE 0x10
-#define DCS_EXIT_SLEEP_MODE 0x11
-#define DCS_SET_DISPLAY_OFF 0x28
-#define DCS_SET_DISPLAY_ON 0x29
-#define DCS_SET_COLUMN_ADDRESS 0x2a
-#define DCS_SET_PAGE_ADDRESS 0x2b
-#define DCS_WRITE_MEM_START 0x2c
-#define DCS_SET_TEAR_OFF 0x34
-#define DCS_SET_TEAR_ON 0x35
-
-extern int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector,
- int pipe);
-extern void mdfld_dsi_pkg_sender_destroy(struct mdfld_dsi_pkg_sender *sender);
-extern int mdfld_dsi_send_dcs(struct mdfld_dsi_pkg_sender *sender, u8 dcs,
- u8 *param, u32 param_num, u8 data_src, int delay);
-extern int mdfld_dsi_send_mcs_short_hs(struct mdfld_dsi_pkg_sender *sender,
- u8 cmd, u8 param, u8 param_num, int delay);
-extern int mdfld_dsi_send_mcs_short_lp(struct mdfld_dsi_pkg_sender *sender,
- u8 cmd, u8 param, u8 param_num, int delay);
-extern int mdfld_dsi_send_mcs_long_hs(struct mdfld_dsi_pkg_sender *sender,
- u32 *data, u32 len, int delay);
-extern int mdfld_dsi_send_mcs_long_lp(struct mdfld_dsi_pkg_sender *sender,
- u32 *data, u32 len, int delay);
-extern int mdfld_dsi_send_gen_short_hs(struct mdfld_dsi_pkg_sender *sender,
- u8 param0, u8 param1, u8 param_num, int delay);
-extern int mdfld_dsi_send_gen_short_lp(struct mdfld_dsi_pkg_sender *sender,
- u8 param0, u8 param1, u8 param_num, int delay);
-extern int mdfld_dsi_send_gen_long_hs(struct mdfld_dsi_pkg_sender *sender,
- u32 *data, u32 len, int delay);
-extern int mdfld_dsi_send_gen_long_lp(struct mdfld_dsi_pkg_sender *sender,
- u32 *data, u32 len, int delay);
-
-extern int mdfld_dsi_read_gen_hs(struct mdfld_dsi_pkg_sender *sender,
- u8 param0, u8 param1, u8 param_num, u32 *data, u16 len);
-extern int mdfld_dsi_read_gen_lp(struct mdfld_dsi_pkg_sender *sender,
- u8 param0, u8 param1, u8 param_num, u32 *data, u16 len);
-extern int mdfld_dsi_read_mcs_hs(struct mdfld_dsi_pkg_sender *sender,
- u8 cmd, u32 *data, u16 len);
-extern int mdfld_dsi_read_mcs_lp(struct mdfld_dsi_pkg_sender *sender,
- u8 cmd, u32 *data, u16 len);
-
-extern void mdfld_dsi_cmds_kick_out(struct mdfld_dsi_pkg_sender *sender);
-
-#endif /* __MDFLD_DSI_PKG_SENDER_H__ */
+++ /dev/null
-/*
- * Copyright © 2006-2011 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- */
-
-#include "framebuffer.h"
-#include "psb_intel_display.h"
-#include "mdfld_dsi_dbi.h"
-#include "mdfld_dsi_dpi.h"
-#include "mdfld_dsi_dbi_dpu.h"
-
-#include <linux/pm_runtime.h>
-
-#ifdef MIN
-#undef MIN
-#endif
-
-#define MIN(x, y) (((x) < (y)) ? (x) : (y))
-
-/* Hardcoded currently */
-static int ksel = KSEL_CRYSTAL_19;
-
-extern void mdfld_save_display(struct drm_device *dev);
-extern bool gbgfxsuspended;
-
-struct psb_intel_range_t {
- int min, max;
-};
-
-struct mdfld_limit_t {
- struct psb_intel_range_t dot, m, p1;
-};
-
-struct mdfld_intel_clock_t {
- /* given values */
- int n;
- int m1, m2;
- int p1, p2;
- /* derived values */
- int dot;
- int vco;
- int m;
- int p;
-};
-
-
-
-#define COUNT_MAX 0x10000000
-
-void mdfldWaitForPipeDisable(struct drm_device *dev, int pipe)
-{
- int count, temp;
- u32 pipeconf_reg = PIPEACONF;
-
- switch (pipe) {
- case 0:
- break;
- case 1:
- pipeconf_reg = PIPEBCONF;
- break;
- case 2:
- pipeconf_reg = PIPECCONF;
- break;
- default:
- DRM_ERROR("Illegal Pipe Number. \n");
- return;
- }
-
- /* FIXME JLIU7_PO */
- psb_intel_wait_for_vblank(dev);
- return;
-
- /* Wait for for the pipe disable to take effect. */
- for (count = 0; count < COUNT_MAX; count++) {
- temp = REG_READ(pipeconf_reg);
- if ((temp & PIPEACONF_PIPE_STATE) == 0)
- break;
- }
-}
-
-void mdfldWaitForPipeEnable(struct drm_device *dev, int pipe)
-{
- int count, temp;
- u32 pipeconf_reg = PIPEACONF;
-
- switch (pipe) {
- case 0:
- break;
- case 1:
- pipeconf_reg = PIPEBCONF;
- break;
- case 2:
- pipeconf_reg = PIPECCONF;
- break;
- default:
- dev_err(dev->dev, "Illegal Pipe Number.\n");
- return;
- }
-
- /* FIXME JLIU7_PO */
- psb_intel_wait_for_vblank(dev);
- return;
-
- /* Wait for for the pipe enable to take effect. */
- for (count = 0; count < COUNT_MAX; count++) {
- temp = REG_READ(pipeconf_reg);
- if ((temp & PIPEACONF_PIPE_STATE) == 1)
- break;
- }
-}
-
-
-static int mdfld_intel_crtc_cursor_set(struct drm_crtc *crtc,
- struct drm_file *file_priv,
- uint32_t handle,
- uint32_t width, uint32_t height)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- uint32_t control = CURACNTR;
- uint32_t base = CURABASE;
- uint32_t temp;
- size_t addr = 0;
- struct gtt_range *gt;
- struct drm_gem_object *obj;
- int ret;
-
- switch (pipe) {
- case 0:
- break;
- case 1:
- control = CURBCNTR;
- base = CURBBASE;
- break;
- case 2:
- control = CURCCNTR;
- base = CURCBASE;
- break;
- default:
- dev_err(dev->dev, "Illegal Pipe Number. \n");
- return -EINVAL;
- }
-
-#if 1 /* FIXME_JLIU7 can't enalbe cursorB/C HW issue. need to remove after HW fix */
- if (pipe != 0)
- return 0;
-#endif
- /* if we want to turn of the cursor ignore width and height */
- if (!handle) {
- dev_dbg(dev->dev, "cursor off\n");
- /* turn off the cursor */
- temp = 0;
- temp |= CURSOR_MODE_DISABLE;
-
- if (gma_power_begin(dev, true)) {
- REG_WRITE(control, temp);
- REG_WRITE(base, 0);
- gma_power_end(dev);
- }
- /* Unpin the old GEM object */
- if (psb_intel_crtc->cursor_obj) {
- gt = container_of(psb_intel_crtc->cursor_obj,
- struct gtt_range, gem);
- psb_gtt_unpin(gt);
- drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
- psb_intel_crtc->cursor_obj = NULL;
- }
- return 0;
- }
-
- /* Currently we only support 64x64 cursors */
- if (width != 64 || height != 64) {
- DRM_ERROR("we currently only support 64x64 cursors\n");
- return -EINVAL;
- }
-
- obj = drm_gem_object_lookup(dev, file_priv, handle);
- if (!obj)
- return -ENOENT;
-
- if (obj->size < width * height * 4) {
- dev_dbg(dev->dev, "buffer is to small\n");
- return -ENOMEM;
- }
-
- gt = container_of(obj, struct gtt_range, gem);
-
- /* Pin the memory into the GTT */
- ret = psb_gtt_pin(gt);
- if (ret) {
- dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
- return ret;
- }
-
-
- addr = gt->offset; /* Or resource.start ??? */
-
- psb_intel_crtc->cursor_addr = addr;
-
- temp = 0;
- /* set the pipe for the cursor */
- temp |= (pipe << 28);
- temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
-
- if (gma_power_begin(dev, true)) {
- REG_WRITE(control, temp);
- REG_WRITE(base, addr);
- gma_power_end(dev);
- }
- /* unpin the old GEM object */
- if (psb_intel_crtc->cursor_obj) {
- gt = container_of(psb_intel_crtc->cursor_obj,
- struct gtt_range, gem);
- psb_gtt_unpin(gt);
- drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
- psb_intel_crtc->cursor_obj = obj;
- }
- return 0;
-}
-
-static int mdfld_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private * dev_priv = (struct drm_psb_private *)dev->dev_private;
- struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info;
- struct psb_drm_dpu_rect rect;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- uint32_t pos = CURAPOS;
- uint32_t base = CURABASE;
- uint32_t temp = 0;
- uint32_t addr;
-
- switch (pipe) {
- case 0:
- if (dpu_info) {
- rect.x = x;
- rect.y = y;
-
- mdfld_dbi_dpu_report_damage(dev, MDFLD_CURSORA, &rect);
- mdfld_dpu_exit_dsr(dev);
- } else if (!(dev_priv->dsr_fb_update & MDFLD_DSR_CURSOR_0))
- mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_CURSOR_0);
- break;
- case 1:
- pos = CURBPOS;
- base = CURBBASE;
- break;
- case 2:
- if (dpu_info) {
- mdfld_dbi_dpu_report_damage(dev, MDFLD_CURSORC, &rect);
- mdfld_dpu_exit_dsr(dev);
- } else if (!(dev_priv->dsr_fb_update & MDFLD_DSR_CURSOR_2))
- mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_CURSOR_2);
- pos = CURCPOS;
- base = CURCBASE;
- break;
- default:
- DRM_ERROR("Illegal Pipe Number. \n");
- return -EINVAL;
- }
-
-#if 1 /* FIXME_JLIU7 can't enable cursorB/C HW issue. need to remove after HW fix */
- if (pipe != 0)
- return 0;
-#endif
- if (x < 0) {
- temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
- x = -x;
- }
- if (y < 0) {
- temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
- y = -y;
- }
-
- temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
- temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
-
- addr = psb_intel_crtc->cursor_addr;
-
- if (gma_power_begin(dev, true)) {
- REG_WRITE(pos, temp);
- REG_WRITE(base, addr);
- gma_power_end(dev);
- }
-
- return 0;
-}
-
-const struct drm_crtc_funcs mdfld_intel_crtc_funcs = {
- .cursor_set = mdfld_intel_crtc_cursor_set,
- .cursor_move = mdfld_intel_crtc_cursor_move,
- .gamma_set = psb_intel_crtc_gamma_set,
- .set_config = drm_crtc_helper_set_config,
- .destroy = psb_intel_crtc_destroy,
-};
-
-static struct drm_device globle_dev;
-
-void mdfld__intel_plane_set_alpha(int enable)
-{
- struct drm_device *dev = &globle_dev;
- int dspcntr_reg = DSPACNTR;
- u32 dspcntr;
-
- dspcntr = REG_READ(dspcntr_reg);
-
- if (enable) {
- dspcntr &= ~DISPPLANE_32BPP_NO_ALPHA;
- dspcntr |= DISPPLANE_32BPP;
- } else {
- dspcntr &= ~DISPPLANE_32BPP;
- dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
- }
-
- REG_WRITE(dspcntr_reg, dspcntr);
-}
-
-int mdfld__intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb)
-{
- struct drm_device *dev = crtc->dev;
- /* struct drm_i915_master_private *master_priv; */
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
- int pipe = psb_intel_crtc->pipe;
- unsigned long start, offset;
- int dsplinoff = DSPALINOFF;
- int dspsurf = DSPASURF;
- int dspstride = DSPASTRIDE;
- int dspcntr_reg = DSPACNTR;
- u32 dspcntr;
- int ret = 0;
-
- memcpy(&globle_dev, dev, sizeof(struct drm_device));
-
- if (!gma_power_begin(dev, true))
- return 0;
-
- /* no fb bound */
- if (!crtc->fb) {
- dev_err(dev->dev, "No FB bound\n");
- goto psb_intel_pipe_cleaner;
- }
-
- switch (pipe) {
- case 0:
- dsplinoff = DSPALINOFF;
- break;
- case 1:
- dsplinoff = DSPBLINOFF;
- dspsurf = DSPBSURF;
- dspstride = DSPBSTRIDE;
- dspcntr_reg = DSPBCNTR;
- break;
- case 2:
- dsplinoff = DSPCLINOFF;
- dspsurf = DSPCSURF;
- dspstride = DSPCSTRIDE;
- dspcntr_reg = DSPCCNTR;
- break;
- default:
- dev_err(dev->dev, "Illegal Pipe Number.\n");
- return -EINVAL;
- }
-
- ret = psb_gtt_pin(psbfb->gtt);
- if (ret < 0)
- goto psb_intel_pipe_set_base_exit;
-
- start = psbfb->gtt->offset;
- offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8);
-
- REG_WRITE(dspstride, crtc->fb->pitches[0]);
- dspcntr = REG_READ(dspcntr_reg);
- dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
-
- switch (crtc->fb->bits_per_pixel) {
- case 8:
- dspcntr |= DISPPLANE_8BPP;
- break;
- case 16:
- if (crtc->fb->depth == 15)
- dspcntr |= DISPPLANE_15_16BPP;
- else
- dspcntr |= DISPPLANE_16BPP;
- break;
- case 24:
- case 32:
- dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
- break;
- default:
- dev_err(dev->dev, "Unknown color depth\n");
- ret = -EINVAL;
- goto psb_intel_pipe_set_base_exit;
- }
- REG_WRITE(dspcntr_reg, dspcntr);
-
- dev_dbg(dev->dev, "Writing base %08lX %08lX %d %d\n",
- start, offset, x, y);
-
- REG_WRITE(dsplinoff, offset);
- REG_READ(dsplinoff);
- REG_WRITE(dspsurf, start);
- REG_READ(dspsurf);
-
-psb_intel_pipe_cleaner:
- /* If there was a previous display we can now unpin it */
- if (old_fb)
- psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
-
-psb_intel_pipe_set_base_exit:
- gma_power_end(dev);
- return ret;
-}
-
-/**
- * Disable the pipe, plane and pll.
- *
- */
-void mdfld_disable_crtc (struct drm_device *dev, int pipe)
-{
- int dpll_reg = MRST_DPLL_A;
- int dspcntr_reg = DSPACNTR;
- int dspbase_reg = MRST_DSPABASE;
- int pipeconf_reg = PIPEACONF;
- u32 gen_fifo_stat_reg = GEN_FIFO_STAT_REG;
- u32 temp;
-
- switch (pipe) {
- case 0:
- break;
- case 1:
- dpll_reg = MDFLD_DPLL_B;
- dspcntr_reg = DSPBCNTR;
- dspbase_reg = DSPBSURF;
- pipeconf_reg = PIPEBCONF;
- break;
- case 2:
- dpll_reg = MRST_DPLL_A;
- dspcntr_reg = DSPCCNTR;
- dspbase_reg = MDFLD_DSPCBASE;
- pipeconf_reg = PIPECCONF;
- gen_fifo_stat_reg = GEN_FIFO_STAT_REG + MIPIC_REG_OFFSET;
- break;
- default:
- dev_err(dev->dev, "Illegal Pipe Number. \n");
- return;
- }
-
- if (pipe != 1)
- mdfld_dsi_gen_fifo_ready (dev, gen_fifo_stat_reg, HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
-
- /* Disable display plane */
- temp = REG_READ(dspcntr_reg);
- if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
- REG_WRITE(dspcntr_reg,
- temp & ~DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
- REG_READ(dspbase_reg);
- }
-
- /* FIXME_JLIU7 MDFLD_PO revisit */
- /* Wait for vblank for the disable to take effect */
-/* MDFLD_PO_JLIU7 psb_intel_wait_for_vblank(dev); */
-
- /* Next, disable display pipes */
- temp = REG_READ(pipeconf_reg);
- if ((temp & PIPEACONF_ENABLE) != 0) {
- temp &= ~PIPEACONF_ENABLE;
- temp |= PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF;
- REG_WRITE(pipeconf_reg, temp);
- REG_READ(pipeconf_reg);
-
- /* Wait for for the pipe disable to take effect. */
- mdfldWaitForPipeDisable(dev, pipe);
- }
-
- temp = REG_READ(dpll_reg);
- if (temp & DPLL_VCO_ENABLE) {
- if (((pipe != 1) && !((REG_READ(PIPEACONF) | REG_READ(PIPECCONF)) & PIPEACONF_ENABLE))
- || (pipe == 1)){
- temp &= ~(DPLL_VCO_ENABLE);
- REG_WRITE(dpll_reg, temp);
- REG_READ(dpll_reg);
- /* Wait for the clocks to turn off. */
- /* FIXME_MDFLD PO may need more delay */
- udelay(500);
-
- if (!(temp & MDFLD_PWR_GATE_EN)) {
- /* gating power of DPLL */
- REG_WRITE(dpll_reg, temp | MDFLD_PWR_GATE_EN);
- /* FIXME_MDFLD PO - change 500 to 1 after PO */
- udelay(5000);
- }
- }
- }
-
-}
-
-/**
- * Sets the power management mode of the pipe and plane.
- *
- * This code should probably grow support for turning the cursor off and back
- * on appropriately at the same time as we're turning the pipe off/on.
- */
-static void mdfld_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- int dpll_reg = MRST_DPLL_A;
- int dspcntr_reg = DSPACNTR;
- int dspbase_reg = MRST_DSPABASE;
- int pipeconf_reg = PIPEACONF;
- u32 pipestat_reg = PIPEASTAT;
- u32 gen_fifo_stat_reg = GEN_FIFO_STAT_REG;
- u32 pipeconf = dev_priv->pipeconf;
- u32 dspcntr = dev_priv->dspcntr;
- u32 mipi_enable_reg = MIPIA_DEVICE_READY_REG;
- u32 temp;
- bool enabled;
- int timeout = 0;
-
- if (!gma_power_begin(dev, true))
- return;
-
- /* Ignore if system is already in DSR and in suspended state. */
- if(/*gbgfxsuspended */0 && dev_priv->dispstatus == false && mode == 3){
- if(dev_priv->rpm_enabled && pipe == 1){
- // dev_priv->is_mipi_on = false;
- pm_request_idle(&dev->pdev->dev);
- }
- return;
- }else if(mode == 0) {
- //do not need to set gbdispstatus=true in crtc.
- //this will be set in encoder such as mdfld_dsi_dbi_dpms
- //gbdispstatus = true;
- }
-
-/* FIXME_JLIU7 MDFLD_PO replaced w/ the following function */
-/* mdfld_dbi_dpms (struct drm_device *dev, int pipe, bool enabled) */
-
- switch (pipe) {
- case 0:
- break;
- case 1:
- dpll_reg = DPLL_B;
- dspcntr_reg = DSPBCNTR;
- dspbase_reg = MRST_DSPBBASE;
- pipeconf_reg = PIPEBCONF;
- pipeconf = dev_priv->pipeconf1;
- dspcntr = dev_priv->dspcntr1;
- dpll_reg = MDFLD_DPLL_B;
- break;
- case 2:
- dpll_reg = MRST_DPLL_A;
- dspcntr_reg = DSPCCNTR;
- dspbase_reg = MDFLD_DSPCBASE;
- pipeconf_reg = PIPECCONF;
- pipestat_reg = PIPECSTAT;
- pipeconf = dev_priv->pipeconf2;
- dspcntr = dev_priv->dspcntr2;
- gen_fifo_stat_reg = GEN_FIFO_STAT_REG + MIPIC_REG_OFFSET;
- mipi_enable_reg = MIPIA_DEVICE_READY_REG + MIPIC_REG_OFFSET;
- break;
- default:
- dev_err(dev->dev, "Illegal Pipe Number.\n");
- return;
- }
-
- /* XXX: When our outputs are all unaware of DPMS modes other than off
- * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
- */
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- /* Enable the DPLL */
- temp = REG_READ(dpll_reg);
-
- if ((temp & DPLL_VCO_ENABLE) == 0) {
- /* When ungating power of DPLL, needs to wait 0.5us before enable the VCO */
- if (temp & MDFLD_PWR_GATE_EN) {
- temp &= ~MDFLD_PWR_GATE_EN;
- REG_WRITE(dpll_reg, temp);
- /* FIXME_MDFLD PO - change 500 to 1 after PO */
- udelay(500);
- }
-
- REG_WRITE(dpll_reg, temp);
- REG_READ(dpll_reg);
- /* FIXME_MDFLD PO - change 500 to 1 after PO */
- udelay(500);
-
- REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
-
- /**
- * wait for DSI PLL to lock
- * NOTE: only need to poll status of pipe 0 and pipe 1,
- * since both MIPI pipes share the same PLL.
- */
- while ((pipe != 2) && (timeout < 20000) && !(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) {
- udelay(150);
- timeout ++;
- }
- }
-
- /* Enable the plane */
- temp = REG_READ(dspcntr_reg);
- if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
- REG_WRITE(dspcntr_reg,
- temp | DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
- }
-
- /* Enable the pipe */
- temp = REG_READ(pipeconf_reg);
- if ((temp & PIPEACONF_ENABLE) == 0) {
- REG_WRITE(pipeconf_reg, pipeconf);
-
- /* Wait for for the pipe enable to take effect. */
- mdfldWaitForPipeEnable(dev, pipe);
- }
-
- /*workaround for sighting 3741701 Random X blank display*/
- /*perform w/a in video mode only on pipe A or C*/
- if ((pipe == 0 || pipe == 2) &&
- (mdfld_panel_dpi(dev) == true)) {
- REG_WRITE(pipestat_reg, REG_READ(pipestat_reg));
- msleep(100);
- if(PIPE_VBLANK_STATUS & REG_READ(pipestat_reg)) {
- printk(KERN_ALERT "OK");
- } else {
- printk(KERN_ALERT "STUCK!!!!");
- /*shutdown controller*/
- temp = REG_READ(dspcntr_reg);
- REG_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
- REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
- /*mdfld_dsi_dpi_shut_down(dev, pipe);*/
- REG_WRITE(0xb048, 1);
- msleep(100);
- temp = REG_READ(pipeconf_reg);
- temp &= ~PIPEACONF_ENABLE;
- REG_WRITE(pipeconf_reg, temp);
- msleep(100); /*wait for pipe disable*/
- /*printk(KERN_ALERT "70008 is %x\n", REG_READ(0x70008));
- printk(KERN_ALERT "b074 is %x\n", REG_READ(0xb074));*/
- REG_WRITE(mipi_enable_reg, 0);
- msleep(100);
- printk(KERN_ALERT "70008 is %x\n", REG_READ(0x70008));
- printk(KERN_ALERT "b074 is %x\n", REG_READ(0xb074));
- REG_WRITE(0xb004, REG_READ(0xb004));
- /* try to bring the controller back up again*/
- REG_WRITE(mipi_enable_reg, 1);
- temp = REG_READ(dspcntr_reg);
- REG_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
- REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
- /*mdfld_dsi_dpi_turn_on(dev, pipe);*/
- REG_WRITE(0xb048, 2);
- msleep(100);
- temp = REG_READ(pipeconf_reg);
- temp |= PIPEACONF_ENABLE;
- REG_WRITE(pipeconf_reg, temp);
- }
- }
-
- psb_intel_crtc_load_lut(crtc);
-
- /* Give the overlay scaler a chance to enable
- if it's on this pipe */
- /* psb_intel_crtc_dpms_video(crtc, true); TODO */
-
- break;
- case DRM_MODE_DPMS_OFF:
- /* Give the overlay scaler a chance to disable
- * if it's on this pipe */
- /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
- if (pipe != 1)
- mdfld_dsi_gen_fifo_ready (dev, gen_fifo_stat_reg, HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
-
- /* Disable the VGA plane that we never use */
- REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
-
- /* Disable display plane */
- temp = REG_READ(dspcntr_reg);
- if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
- REG_WRITE(dspcntr_reg,
- temp & ~DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
- REG_READ(dspbase_reg);
- }
-
- /* FIXME_JLIU7 MDFLD_PO revisit */
- /* Wait for vblank for the disable to take effect */
-// MDFLD_PO_JLIU7 psb_intel_wait_for_vblank(dev);
-
- /* Next, disable display pipes */
- temp = REG_READ(pipeconf_reg);
- if ((temp & PIPEACONF_ENABLE) != 0) {
- temp &= ~PIPEACONF_ENABLE;
- temp |= PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF;
- REG_WRITE(pipeconf_reg, temp);
-// REG_WRITE(pipeconf_reg, 0);
- REG_READ(pipeconf_reg);
-
- /* Wait for for the pipe disable to take effect. */
- mdfldWaitForPipeDisable(dev, pipe);
- }
-
- temp = REG_READ(dpll_reg);
- if (temp & DPLL_VCO_ENABLE) {
- if (((pipe != 1) && !((REG_READ(PIPEACONF) | REG_READ(PIPECCONF)) & PIPEACONF_ENABLE))
- || (pipe == 1)){
- temp &= ~(DPLL_VCO_ENABLE);
- REG_WRITE(dpll_reg, temp);
- REG_READ(dpll_reg);
- /* Wait for the clocks to turn off. */
- /* FIXME_MDFLD PO may need more delay */
- udelay(500);
-#if 0 /* MDFLD_PO_JLIU7 */
- if (!(temp & MDFLD_PWR_GATE_EN)) {
- /* gating power of DPLL */
- REG_WRITE(dpll_reg, temp | MDFLD_PWR_GATE_EN);
- /* FIXME_MDFLD PO - change 500 to 1 after PO */
- udelay(5000);
- }
-#endif /* MDFLD_PO_JLIU7 */
- }
- }
- break;
- }
-
- enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
-
-#if 0 /* JB: Add vblank support later */
- if (enabled)
- dev_priv->vblank_pipe |= (1 << pipe);
- else
- dev_priv->vblank_pipe &= ~(1 << pipe);
-#endif
-
- gma_power_end(dev);
-}
-
-
-#define MDFLD_LIMT_DPLL_19 0
-#define MDFLD_LIMT_DPLL_25 1
-#define MDFLD_LIMT_DPLL_83 2
-#define MDFLD_LIMT_DPLL_100 3
-#define MDFLD_LIMT_DSIPLL_19 4
-#define MDFLD_LIMT_DSIPLL_25 5
-#define MDFLD_LIMT_DSIPLL_83 6
-#define MDFLD_LIMT_DSIPLL_100 7
-
-#define MDFLD_DOT_MIN 19750 /* FIXME_MDFLD JLIU7 need to find out min & max for MDFLD */
-#define MDFLD_DOT_MAX 120000
-#define MDFLD_DPLL_M_MIN_19 113
-#define MDFLD_DPLL_M_MAX_19 155
-#define MDFLD_DPLL_P1_MIN_19 2
-#define MDFLD_DPLL_P1_MAX_19 10
-#define MDFLD_DPLL_M_MIN_25 101
-#define MDFLD_DPLL_M_MAX_25 130
-#define MDFLD_DPLL_P1_MIN_25 2
-#define MDFLD_DPLL_P1_MAX_25 10
-#define MDFLD_DPLL_M_MIN_83 64
-#define MDFLD_DPLL_M_MAX_83 64
-#define MDFLD_DPLL_P1_MIN_83 2
-#define MDFLD_DPLL_P1_MAX_83 2
-#define MDFLD_DPLL_M_MIN_100 64
-#define MDFLD_DPLL_M_MAX_100 64
-#define MDFLD_DPLL_P1_MIN_100 2
-#define MDFLD_DPLL_P1_MAX_100 2
-#define MDFLD_DSIPLL_M_MIN_19 131
-#define MDFLD_DSIPLL_M_MAX_19 175
-#define MDFLD_DSIPLL_P1_MIN_19 3
-#define MDFLD_DSIPLL_P1_MAX_19 8
-#define MDFLD_DSIPLL_M_MIN_25 97
-#define MDFLD_DSIPLL_M_MAX_25 140
-#define MDFLD_DSIPLL_P1_MIN_25 3
-#define MDFLD_DSIPLL_P1_MAX_25 9
-#define MDFLD_DSIPLL_M_MIN_83 33
-#define MDFLD_DSIPLL_M_MAX_83 92
-#define MDFLD_DSIPLL_P1_MIN_83 2
-#define MDFLD_DSIPLL_P1_MAX_83 3
-#define MDFLD_DSIPLL_M_MIN_100 97
-#define MDFLD_DSIPLL_M_MAX_100 140
-#define MDFLD_DSIPLL_P1_MIN_100 3
-#define MDFLD_DSIPLL_P1_MAX_100 9
-
-static const struct mdfld_limit_t mdfld_limits[] = {
- { /* MDFLD_LIMT_DPLL_19 */
- .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
- .m = {.min = MDFLD_DPLL_M_MIN_19, .max = MDFLD_DPLL_M_MAX_19},
- .p1 = {.min = MDFLD_DPLL_P1_MIN_19, .max = MDFLD_DPLL_P1_MAX_19},
- },
- { /* MDFLD_LIMT_DPLL_25 */
- .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
- .m = {.min = MDFLD_DPLL_M_MIN_25, .max = MDFLD_DPLL_M_MAX_25},
- .p1 = {.min = MDFLD_DPLL_P1_MIN_25, .max = MDFLD_DPLL_P1_MAX_25},
- },
- { /* MDFLD_LIMT_DPLL_83 */
- .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
- .m = {.min = MDFLD_DPLL_M_MIN_83, .max = MDFLD_DPLL_M_MAX_83},
- .p1 = {.min = MDFLD_DPLL_P1_MIN_83, .max = MDFLD_DPLL_P1_MAX_83},
- },
- { /* MDFLD_LIMT_DPLL_100 */
- .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
- .m = {.min = MDFLD_DPLL_M_MIN_100, .max = MDFLD_DPLL_M_MAX_100},
- .p1 = {.min = MDFLD_DPLL_P1_MIN_100, .max = MDFLD_DPLL_P1_MAX_100},
- },
- { /* MDFLD_LIMT_DSIPLL_19 */
- .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
- .m = {.min = MDFLD_DSIPLL_M_MIN_19, .max = MDFLD_DSIPLL_M_MAX_19},
- .p1 = {.min = MDFLD_DSIPLL_P1_MIN_19, .max = MDFLD_DSIPLL_P1_MAX_19},
- },
- { /* MDFLD_LIMT_DSIPLL_25 */
- .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
- .m = {.min = MDFLD_DSIPLL_M_MIN_25, .max = MDFLD_DSIPLL_M_MAX_25},
- .p1 = {.min = MDFLD_DSIPLL_P1_MIN_25, .max = MDFLD_DSIPLL_P1_MAX_25},
- },
- { /* MDFLD_LIMT_DSIPLL_83 */
- .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
- .m = {.min = MDFLD_DSIPLL_M_MIN_83, .max = MDFLD_DSIPLL_M_MAX_83},
- .p1 = {.min = MDFLD_DSIPLL_P1_MIN_83, .max = MDFLD_DSIPLL_P1_MAX_83},
- },
- { /* MDFLD_LIMT_DSIPLL_100 */
- .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
- .m = {.min = MDFLD_DSIPLL_M_MIN_100, .max = MDFLD_DSIPLL_M_MAX_100},
- .p1 = {.min = MDFLD_DSIPLL_P1_MIN_100, .max = MDFLD_DSIPLL_P1_MAX_100},
- },
-};
-
-#define MDFLD_M_MIN 21
-#define MDFLD_M_MAX 180
-static const u32 mdfld_m_converts[] = {
-/* M configuration table from 9-bit LFSR table */
- 224, 368, 440, 220, 366, 439, 219, 365, 182, 347, /* 21 - 30 */
- 173, 342, 171, 85, 298, 149, 74, 37, 18, 265, /* 31 - 40 */
- 388, 194, 353, 432, 216, 108, 310, 155, 333, 166, /* 41 - 50 */
- 83, 41, 276, 138, 325, 162, 337, 168, 340, 170, /* 51 - 60 */
- 341, 426, 469, 234, 373, 442, 221, 110, 311, 411, /* 61 - 70 */
- 461, 486, 243, 377, 188, 350, 175, 343, 427, 213, /* 71 - 80 */
- 106, 53, 282, 397, 354, 227, 113, 56, 284, 142, /* 81 - 90 */
- 71, 35, 273, 136, 324, 418, 465, 488, 500, 506, /* 91 - 100 */
- 253, 126, 63, 287, 399, 455, 483, 241, 376, 444, /* 101 - 110 */
- 478, 495, 503, 251, 381, 446, 479, 239, 375, 443, /* 111 - 120 */
- 477, 238, 119, 315, 157, 78, 295, 147, 329, 420, /* 121 - 130 */
- 210, 105, 308, 154, 77, 38, 275, 137, 68, 290, /* 131 - 140 */
- 145, 328, 164, 82, 297, 404, 458, 485, 498, 249, /* 141 - 150 */
- 380, 190, 351, 431, 471, 235, 117, 314, 413, 206, /* 151 - 160 */
- 103, 51, 25, 12, 262, 387, 193, 96, 48, 280, /* 161 - 170 */
- 396, 198, 99, 305, 152, 76, 294, 403, 457, 228, /* 171 - 180 */
-};
-
-static const struct mdfld_limit_t *mdfld_limit(struct drm_crtc *crtc)
-{
- const struct mdfld_limit_t *limit = NULL;
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)
- || psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI2)) {
- if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19))
- limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_19];
- else if (ksel == KSEL_BYPASS_25)
- limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_25];
- else if ((ksel == KSEL_BYPASS_83_100) && (dev_priv->core_freq == 166))
- limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_83];
- else if ((ksel == KSEL_BYPASS_83_100) &&
- (dev_priv->core_freq == 100 || dev_priv->core_freq == 200))
- limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_100];
- } else if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
- if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19))
- limit = &mdfld_limits[MDFLD_LIMT_DPLL_19];
- else if (ksel == KSEL_BYPASS_25)
- limit = &mdfld_limits[MDFLD_LIMT_DPLL_25];
- else if ((ksel == KSEL_BYPASS_83_100) && (dev_priv->core_freq == 166))
- limit = &mdfld_limits[MDFLD_LIMT_DPLL_83];
- else if ((ksel == KSEL_BYPASS_83_100) &&
- (dev_priv->core_freq == 100 || dev_priv->core_freq == 200))
- limit = &mdfld_limits[MDFLD_LIMT_DPLL_100];
- } else {
- limit = NULL;
- dev_err(dev->dev, "mdfld_limit Wrong display type.\n");
- }
-
- return limit;
-}
-
-/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
-static void mdfld_clock(int refclk, struct mdfld_intel_clock_t *clock)
-{
- clock->dot = (refclk * clock->m) / clock->p1;
-}
-
-/**
- * Returns a set of divisors for the desired target clock with the given refclk,
- * or FALSE. Divisor values are the actual divisors for
- */
-static bool
-mdfldFindBestPLL(struct drm_crtc *crtc, int target, int refclk,
- struct mdfld_intel_clock_t *best_clock)
-{
- struct mdfld_intel_clock_t clock;
- const struct mdfld_limit_t *limit = mdfld_limit(crtc);
- int err = target;
-
- memset(best_clock, 0, sizeof(*best_clock));
-
- for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
- for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
- clock.p1++) {
- int this_err;
-
- mdfld_clock(refclk, &clock);
-
- this_err = abs(clock.dot - target);
- if (this_err < err) {
- *best_clock = clock;
- err = this_err;
- }
- }
- }
- return err != target;
-}
-
-/**
- * Return the pipe currently connected to the panel fitter,
- * or -1 if the panel fitter is not present or not in use
- */
-static int mdfld_panel_fitter_pipe(struct drm_device *dev)
-{
- u32 pfit_control;
-
- pfit_control = REG_READ(PFIT_CONTROL);
-
- /* See if the panel fitter is in use */
- if ((pfit_control & PFIT_ENABLE) == 0)
- return -1;
- return (pfit_control >> 29) & 3;
-}
-
-static int mdfld_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct drm_psb_private *dev_priv = dev->dev_private;
- int pipe = psb_intel_crtc->pipe;
- int fp_reg = MRST_FPA0;
- int dpll_reg = MRST_DPLL_A;
- int dspcntr_reg = DSPACNTR;
- int pipeconf_reg = PIPEACONF;
- int htot_reg = HTOTAL_A;
- int hblank_reg = HBLANK_A;
- int hsync_reg = HSYNC_A;
- int vtot_reg = VTOTAL_A;
- int vblank_reg = VBLANK_A;
- int vsync_reg = VSYNC_A;
- int dspsize_reg = DSPASIZE;
- int dsppos_reg = DSPAPOS;
- int pipesrc_reg = PIPEASRC;
- u32 *pipeconf = &dev_priv->pipeconf;
- u32 *dspcntr = &dev_priv->dspcntr;
- int refclk = 0;
- int clk_n = 0, clk_p2 = 0, clk_byte = 1, clk = 0, m_conv = 0, clk_tmp = 0;
- struct mdfld_intel_clock_t clock;
- bool ok;
- u32 dpll = 0, fp = 0;
- bool is_crt = false, is_lvds = false, is_tv = false;
- bool is_mipi = false, is_mipi2 = false, is_hdmi = false;
- struct drm_mode_config *mode_config = &dev->mode_config;
- struct psb_intel_output *psb_intel_output = NULL;
- uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
- struct drm_encoder *encoder;
- struct drm_connector *connector;
- int timeout = 0;
-
- dev_dbg(dev->dev, "pipe = 0x%x \n", pipe);
-
- switch (pipe) {
- case 0:
- break;
- case 1:
- fp_reg = FPB0;
- dpll_reg = DPLL_B;
- dspcntr_reg = DSPBCNTR;
- pipeconf_reg = PIPEBCONF;
- htot_reg = HTOTAL_B;
- hblank_reg = HBLANK_B;
- hsync_reg = HSYNC_B;
- vtot_reg = VTOTAL_B;
- vblank_reg = VBLANK_B;
- vsync_reg = VSYNC_B;
- dspsize_reg = DSPBSIZE;
- dsppos_reg = DSPBPOS;
- pipesrc_reg = PIPEBSRC;
- pipeconf = &dev_priv->pipeconf1;
- dspcntr = &dev_priv->dspcntr1;
- fp_reg = MDFLD_DPLL_DIV0;
- dpll_reg = MDFLD_DPLL_B;
- break;
- case 2:
- dpll_reg = MRST_DPLL_A;
- dspcntr_reg = DSPCCNTR;
- pipeconf_reg = PIPECCONF;
- htot_reg = HTOTAL_C;
- hblank_reg = HBLANK_C;
- hsync_reg = HSYNC_C;
- vtot_reg = VTOTAL_C;
- vblank_reg = VBLANK_C;
- vsync_reg = VSYNC_C;
- dspsize_reg = DSPCSIZE;
- dsppos_reg = DSPCPOS;
- pipesrc_reg = PIPECSRC;
- pipeconf = &dev_priv->pipeconf2;
- dspcntr = &dev_priv->dspcntr2;
- break;
- default:
- DRM_ERROR("Illegal Pipe Number. \n");
- return 0;
- }
-
- dev_dbg(dev->dev, "adjusted_hdisplay = %d\n",
- adjusted_mode->hdisplay);
- dev_dbg(dev->dev, "adjusted_vdisplay = %d\n",
- adjusted_mode->vdisplay);
- dev_dbg(dev->dev, "adjusted_hsync_start = %d\n",
- adjusted_mode->hsync_start);
- dev_dbg(dev->dev, "adjusted_hsync_end = %d\n",
- adjusted_mode->hsync_end);
- dev_dbg(dev->dev, "adjusted_htotal = %d\n",
- adjusted_mode->htotal);
- dev_dbg(dev->dev, "adjusted_vsync_start = %d\n",
- adjusted_mode->vsync_start);
- dev_dbg(dev->dev, "adjusted_vsync_end = %d\n",
- adjusted_mode->vsync_end);
- dev_dbg(dev->dev, "adjusted_vtotal = %d\n",
- adjusted_mode->vtotal);
- dev_dbg(dev->dev, "adjusted_clock = %d\n",
- adjusted_mode->clock);
- dev_dbg(dev->dev, "hdisplay = %d\n",
- mode->hdisplay);
- dev_dbg(dev->dev, "vdisplay = %d\n",
- mode->vdisplay);
-
- if (!gma_power_begin(dev, true))
- return 0;
-
- memcpy(&psb_intel_crtc->saved_mode, mode, sizeof(struct drm_display_mode));
- memcpy(&psb_intel_crtc->saved_adjusted_mode, adjusted_mode, sizeof(struct drm_display_mode));
-
- list_for_each_entry(connector, &mode_config->connector_list, head) {
-
- encoder = connector->encoder;
-
- if(!encoder)
- continue;
-
- if (encoder->crtc != crtc)
- continue;
-
- psb_intel_output = to_psb_intel_output(connector);
-
- dev_dbg(dev->dev, "output->type = 0x%x \n", psb_intel_output->type);
-
- switch (psb_intel_output->type) {
- case INTEL_OUTPUT_LVDS:
- is_lvds = true;
- break;
- case INTEL_OUTPUT_TVOUT:
- is_tv = true;
- break;
- case INTEL_OUTPUT_ANALOG:
- is_crt = true;
- break;
- case INTEL_OUTPUT_MIPI:
- is_mipi = true;
- break;
- case INTEL_OUTPUT_MIPI2:
- is_mipi2 = true;
- break;
- case INTEL_OUTPUT_HDMI:
- is_hdmi = true;
- break;
- }
- }
-
- /* Disable the VGA plane that we never use */
- REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
-
- /* Disable the panel fitter if it was on our pipe */
- if (mdfld_panel_fitter_pipe(dev) == pipe)
- REG_WRITE(PFIT_CONTROL, 0);
-
- /* pipesrc and dspsize control the size that is scaled from,
- * which should always be the user's requested size.
- */
- if (pipe == 1) {
- /* FIXME: To make HDMI display with 864x480 (TPO), 480x864 (PYR) or 480x854 (TMD), set the sprite
- * width/height and souce image size registers with the adjusted mode for pipe B. */
-
- /* The defined sprite rectangle must always be completely contained within the displayable
- * area of the screen image (frame buffer). */
- REG_WRITE(dspsize_reg, ((MIN(mode->crtc_vdisplay, adjusted_mode->crtc_vdisplay) - 1) << 16)
- | (MIN(mode->crtc_hdisplay, adjusted_mode->crtc_hdisplay) - 1));
- /* Set the CRTC with encoder mode. */
- REG_WRITE(pipesrc_reg, ((mode->crtc_hdisplay - 1) << 16)
- | (mode->crtc_vdisplay - 1));
- } else {
- REG_WRITE(dspsize_reg, ((mode->crtc_vdisplay - 1) << 16) | (mode->crtc_hdisplay - 1));
- REG_WRITE(pipesrc_reg, ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1));
- }
-
- REG_WRITE(dsppos_reg, 0);
-
- if (psb_intel_output)
- drm_connector_property_get_value(&psb_intel_output->base,
- dev->mode_config.scaling_mode_property, &scalingType);
-
- if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
- /*
- * Medfield doesn't have register support for centering so
- * we need to mess with the h/vblank and h/vsync start and
- * ends to get central
- */
- int offsetX = 0, offsetY = 0;
-
- offsetX = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
- offsetY = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
-
- REG_WRITE(htot_reg, (mode->crtc_hdisplay - 1) |
- ((adjusted_mode->crtc_htotal - 1) << 16));
- REG_WRITE(vtot_reg, (mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
- REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - offsetX - 1) |
- ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16));
- REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - offsetX - 1) |
- ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16));
- REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - offsetY - 1) |
- ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16));
- REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - offsetY - 1) |
- ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16));
- } else {
- REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
- ((adjusted_mode->crtc_htotal - 1) << 16));
- REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
- REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
- ((adjusted_mode->crtc_hblank_end - 1) << 16));
- REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
- ((adjusted_mode->crtc_hsync_end - 1) << 16));
- REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
- ((adjusted_mode->crtc_vblank_end - 1) << 16));
- REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
- ((adjusted_mode->crtc_vsync_end - 1) << 16));
- }
-
- /* Flush the plane changes */
- {
- struct drm_crtc_helper_funcs *crtc_funcs =
- crtc->helper_private;
- crtc_funcs->mode_set_base(crtc, x, y, old_fb);
- }
-
- /* setup pipeconf */
- *pipeconf = PIPEACONF_ENABLE; /* FIXME_JLIU7 REG_READ(pipeconf_reg); */
-
- /* Set up the display plane register */
- *dspcntr = REG_READ(dspcntr_reg);
- *dspcntr |= pipe << DISPPLANE_SEL_PIPE_POS;
- *dspcntr |= DISPLAY_PLANE_ENABLE;
-/* MDFLD_PO_JLIU7 dspcntr |= DISPPLANE_BOTTOM; */
-/* MDFLD_PO_JLIU7 dspcntr |= DISPPLANE_GAMMA_ENABLE; */
-
- if (is_mipi2)
- {
- goto mrst_crtc_mode_set_exit;
- }
-/* FIXME JLIU7 Add MDFLD HDMI supports */
-/* FIXME_MDFLD JLIU7 DSIPLL clock *= 8? */
-/* FIXME_MDFLD JLIU7 need to revist for dual MIPI supports */
- clk = adjusted_mode->clock;
-
- if (is_hdmi) {
- if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19))
- {
- refclk = 19200;
-
- if (is_mipi || is_mipi2)
- {
- clk_n = 1, clk_p2 = 8;
- } else if (is_hdmi) {
- clk_n = 1, clk_p2 = 10;
- }
- } else if (ksel == KSEL_BYPASS_25) {
- refclk = 25000;
-
- if (is_mipi || is_mipi2)
- {
- clk_n = 1, clk_p2 = 8;
- } else if (is_hdmi) {
- clk_n = 1, clk_p2 = 10;
- }
- } else if ((ksel == KSEL_BYPASS_83_100) && (dev_priv->core_freq == 166)) {
- refclk = 83000;
-
- if (is_mipi || is_mipi2)
- {
- clk_n = 4, clk_p2 = 8;
- } else if (is_hdmi) {
- clk_n = 4, clk_p2 = 10;
- }
- } else if ((ksel == KSEL_BYPASS_83_100) &&
- (dev_priv->core_freq == 100 || dev_priv->core_freq == 200)) {
- refclk = 100000;
- if (is_mipi || is_mipi2)
- {
- clk_n = 4, clk_p2 = 8;
- } else if (is_hdmi) {
- clk_n = 4, clk_p2 = 10;
- }
- }
-
- if (is_mipi)
- clk_byte = dev_priv->bpp / 8;
- else if (is_mipi2)
- clk_byte = dev_priv->bpp2 / 8;
-
- clk_tmp = clk * clk_n * clk_p2 * clk_byte;
-
- dev_dbg(dev->dev, "clk = %d, clk_n = %d, clk_p2 = %d. \n", clk, clk_n, clk_p2);
- dev_dbg(dev->dev, "adjusted_mode->clock = %d, clk_tmp = %d. \n", adjusted_mode->clock, clk_tmp);
-
- ok = mdfldFindBestPLL(crtc, clk_tmp, refclk, &clock);
-
- if (!ok) {
- dev_err(dev->dev,
- "mdfldFindBestPLL fail in mdfld_crtc_mode_set. \n");
- } else {
- m_conv = mdfld_m_converts[(clock.m - MDFLD_M_MIN)];
-
- dev_dbg(dev->dev, "dot clock = %d,"
- "m = %d, p1 = %d, m_conv = %d. \n", clock.dot, clock.m,
- clock.p1, m_conv);
- }
-
- dpll = REG_READ(dpll_reg);
-
- if (dpll & DPLL_VCO_ENABLE) {
- dpll &= ~DPLL_VCO_ENABLE;
- REG_WRITE(dpll_reg, dpll);
- REG_READ(dpll_reg);
-
- /* FIXME jliu7 check the DPLL lock bit PIPEACONF[29] */
- /* FIXME_MDFLD PO - change 500 to 1 after PO */
- udelay(500);
-
- /* reset M1, N1 & P1 */
- REG_WRITE(fp_reg, 0);
- dpll &= ~MDFLD_P1_MASK;
- REG_WRITE(dpll_reg, dpll);
- /* FIXME_MDFLD PO - change 500 to 1 after PO */
- udelay(500);
- }
-
- /* When ungating power of DPLL, needs to wait 0.5us before enable the VCO */
- if (dpll & MDFLD_PWR_GATE_EN) {
- dpll &= ~MDFLD_PWR_GATE_EN;
- REG_WRITE(dpll_reg, dpll);
- /* FIXME_MDFLD PO - change 500 to 1 after PO */
- udelay(500);
- }
-
- dpll = 0;
-
-#if 0 /* FIXME revisit later */
- if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19) || (ksel == KSEL_BYPASS_25)) {
- dpll &= ~MDFLD_INPUT_REF_SEL;
- } else if (ksel == KSEL_BYPASS_83_100) {
- dpll |= MDFLD_INPUT_REF_SEL;
- }
-#endif /* FIXME revisit later */
-
- if (is_hdmi)
- dpll |= MDFLD_VCO_SEL;
-
- fp = (clk_n / 2) << 16;
- fp |= m_conv;
-
- /* compute bitmask from p1 value */
- dpll |= (1 << (clock.p1 - 2)) << 17;
-
-#if 0 /* 1080p30 & 720p */
- dpll = 0x00050000;
- fp = 0x000001be;
-#endif
-#if 0 /* 480p */
- dpll = 0x02010000;
- fp = 0x000000d2;
-#endif
- } else {
-#if 0 /*DBI_TPO_480x864*/
- dpll = 0x00020000;
- fp = 0x00000156;
-#endif /* DBI_TPO_480x864 */ /* get from spec. */
-
- dpll = 0x00800000;
- fp = 0x000000c1;
-}
-
- REG_WRITE(fp_reg, fp);
- REG_WRITE(dpll_reg, dpll);
- /* FIXME_MDFLD PO - change 500 to 1 after PO */
- udelay(500);
-
- dpll |= DPLL_VCO_ENABLE;
- REG_WRITE(dpll_reg, dpll);
- REG_READ(dpll_reg);
-
- /* wait for DSI PLL to lock */
- while ((timeout < 20000) && !(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) {
- udelay(150);
- timeout ++;
- }
-
- if (is_mipi)
- goto mrst_crtc_mode_set_exit;
-
- dev_dbg(dev->dev, "is_mipi = 0x%x \n", is_mipi);
-
- REG_WRITE(pipeconf_reg, *pipeconf);
- REG_READ(pipeconf_reg);
-
- /* Wait for for the pipe enable to take effect. */
-//FIXME_JLIU7 HDMI mrstWaitForPipeEnable(dev);
-
- REG_WRITE(dspcntr_reg, *dspcntr);
- psb_intel_wait_for_vblank(dev);
-
-mrst_crtc_mode_set_exit:
-
- gma_power_end(dev);
-
- return 0;
-}
-
-static void mdfld_crtc_prepare(struct drm_crtc *crtc)
-{
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
-}
-
-static void mdfld_crtc_commit(struct drm_crtc *crtc)
-{
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
-}
-
-static bool mdfld_crtc_mode_fixup(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- return true;
-}
-
-const struct drm_crtc_helper_funcs mdfld_helper_funcs = {
- .dpms = mdfld_crtc_dpms,
- .mode_fixup = mdfld_crtc_mode_fixup,
- .mode_set = mdfld_crtc_mode_set,
- .mode_set_base = mdfld__intel_pipe_set_base,
- .prepare = mdfld_crtc_prepare,
- .commit = mdfld_crtc_commit,
-};
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Jim Liu <jim.liu@intel.com>
- */
-
-#define MSIC_PCI_DEVICE_ID 0x831
-
-int msic_regsiter_driver(void);
-int msic_unregister_driver(void);
-extern void hpd_notify_um(void);
+++ /dev/null
-/*
- * Copyright (c) 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
-*/
-
-#include <linux/init.h>
-#include <linux/moduleparam.h>
-#include "mdfld_dsi_dbi.h"
-#include "mdfld_dsi_dpi.h"
-#include "mdfld_dsi_output.h"
-#include "mdfld_output.h"
-#include "mdfld_dsi_dbi_dpu.h"
-
-#include "displays/tpo_cmd.h"
-#include "displays/tpo_vid.h"
-#include "displays/tmd_cmd.h"
-#include "displays/tmd_vid.h"
-#include "displays/pyr_cmd.h"
-#include "displays/pyr_vid.h"
-/* #include "displays/hdmi.h" */
-
-static int mdfld_dual_mipi;
-static int mdfld_hdmi;
-static int mdfld_dpu;
-
-module_param(mdfld_dual_mipi, int, 0600);
-MODULE_PARM_DESC(mdfld_dual_mipi, "Enable dual MIPI configuration");
-module_param(mdfld_hdmi, int, 0600);
-MODULE_PARM_DESC(mdfld_hdmi, "Enable Medfield HDMI");
-module_param(mdfld_dpu, int, 0600);
-MODULE_PARM_DESC(mdfld_dpu, "Enable Medfield DPU");
-
-/* For now a single type per device is all we cope with */
-int mdfld_get_panel_type(struct drm_device *dev, int pipe)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- return dev_priv->panel_id;
-}
-
-int mdfld_panel_dpi(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- switch (dev_priv->panel_id) {
- case TMD_VID:
- case TPO_VID:
- case PYR_VID:
- return true;
- case TMD_CMD:
- case TPO_CMD:
- case PYR_CMD:
- default:
- return false;
- }
-}
-
-static int init_panel(struct drm_device *dev, int mipi_pipe, int p_type)
-{
- struct panel_funcs *p_cmd_funcs;
- struct panel_funcs *p_vid_funcs;
-
- /* Oh boy ... FIXME */
- p_cmd_funcs = kzalloc(sizeof(struct panel_funcs), GFP_KERNEL);
- if (p_cmd_funcs == NULL)
- return -ENODEV;
- p_vid_funcs = kzalloc(sizeof(struct panel_funcs), GFP_KERNEL);
- if (p_vid_funcs == NULL) {
- kfree(p_cmd_funcs);
- return -ENODEV;
- }
-
- switch (p_type) {
- case TPO_CMD:
- tpo_cmd_init(dev, p_cmd_funcs);
- mdfld_dsi_output_init(dev, mipi_pipe, NULL, p_cmd_funcs, NULL);
- break;
- case TPO_VID:
- tpo_vid_init(dev, p_vid_funcs);
- mdfld_dsi_output_init(dev, mipi_pipe, NULL, NULL, p_vid_funcs);
- break;
- case TMD_CMD:
- /*tmd_cmd_init(dev, p_cmd_funcs); */
- mdfld_dsi_output_init(dev, mipi_pipe, NULL, p_cmd_funcs, NULL);
- break;
- case TMD_VID:
- tmd_vid_init(dev, p_vid_funcs);
- mdfld_dsi_output_init(dev, mipi_pipe, NULL, NULL, p_vid_funcs);
- break;
- case PYR_CMD:
- pyr_cmd_init(dev, p_cmd_funcs);
- mdfld_dsi_output_init(dev, mipi_pipe, NULL, p_cmd_funcs, NULL);
- break;
- case PYR_VID:
- mdfld_dsi_output_init(dev, mipi_pipe, NULL, NULL, p_vid_funcs);
- break;
- case TPO: /* TPO panel supports both cmd & vid interfaces */
- tpo_cmd_init(dev, p_cmd_funcs);
- tpo_vid_init(dev, p_vid_funcs);
- mdfld_dsi_output_init(dev, mipi_pipe, NULL, p_cmd_funcs,
- p_vid_funcs);
- break;
- case TMD:
- break;
- case PYR:
- break;
-#if 0
- case HDMI:
- dev_dbg(dev->dev, "Initializing HDMI");
- mdfld_hdmi_init(dev, &dev_priv->mode_dev);
- break;
-#endif
- default:
- dev_err(dev->dev, "Unsupported interface %d", p_type);
- return -ENODEV;
- }
- return 0;
-}
-
-int mdfld_output_init(struct drm_device *dev)
-{
- int type;
-
- /* MIPI panel 1 */
- type = mdfld_get_panel_type(dev, 0);
- dev_info(dev->dev, "panel 1: type is %d\n", type);
- init_panel(dev, 0, type);
-
- if (mdfld_dual_mipi) {
- /* MIPI panel 2 */
- type = mdfld_get_panel_type(dev, 2);
- dev_info(dev->dev, "panel 2: type is %d\n", type);
- init_panel(dev, 2, type);
- }
- if (mdfld_hdmi)
- /* HDMI panel */
- init_panel(dev, 0, HDMI);
- return 0;
-}
-
-void mdfld_output_setup(struct drm_device *dev)
-{
- /* FIXME: this is not the right place for this stuff ! */
- if (IS_MFLD(dev)) {
- if (mdfld_dpu)
- mdfld_dbi_dpu_init(dev);
- else
- mdfld_dbi_dsr_init(dev);
- }
-}
+++ /dev/null
-/*
- * Copyright (c) 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
-*/
-
-#ifndef MDFLD_OUTPUT_H
-#define MDFLD_OUTPUT_H
-
-int mdfld_output_init(struct drm_device *dev);
-int mdfld_panel_dpi(struct drm_device *dev);
-int mdfld_get_panel_type(struct drm_device *dev, int pipe);
-void mdfld_disable_crtc (struct drm_device *dev, int pipe);
-
-extern const struct drm_crtc_helper_funcs mdfld_helper_funcs;
-extern const struct drm_crtc_funcs mdfld_intel_crtc_funcs;
-
-extern void mdfld_output_setup(struct drm_device *dev);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
-*/
-
-#include "mdfld_dsi_dbi.h"
-#include "mdfld_dsi_dpi.h"
-#include "mdfld_dsi_output.h"
-#include "mdfld_output.h"
-#include "mdfld_dsi_dbi_dpu.h"
-#include "mdfld_dsi_pkg_sender.h"
-
-#include "displays/pyr_cmd.h"
-
-static struct drm_display_mode *pyr_cmd_get_config_mode(struct drm_device *dev)
-{
- struct drm_display_mode *mode;
-
- mode = kzalloc(sizeof(*mode), GFP_KERNEL);
- if (!mode) {
- dev_err(dev->dev, "Out of memory\n");
- return NULL;
- }
-
- dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay);
- dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay);
- dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start);
- dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end);
- dev_dbg(dev->dev, "htotal is %d\n", mode->htotal);
- dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start);
- dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end);
- dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal);
- dev_dbg(dev->dev, "clock is %d\n", mode->clock);
-
- mode->hdisplay = 480;
- mode->vdisplay = 864;
- mode->hsync_start = 487;
- mode->hsync_end = 490;
- mode->htotal = 499;
- mode->vsync_start = 874;
- mode->vsync_end = 878;
- mode->vtotal = 886;
- mode->clock = 25777;
-
- drm_mode_set_name(mode);
- drm_mode_set_crtcinfo(mode, 0);
-
- mode->type |= DRM_MODE_TYPE_PREFERRED;
-
- return mode;
-}
-
-static bool pyr_dsi_dbi_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct drm_display_mode *fixed_mode = pyr_cmd_get_config_mode(dev);
-
- if (fixed_mode) {
- adjusted_mode->hdisplay = fixed_mode->hdisplay;
- adjusted_mode->hsync_start = fixed_mode->hsync_start;
- adjusted_mode->hsync_end = fixed_mode->hsync_end;
- adjusted_mode->htotal = fixed_mode->htotal;
- adjusted_mode->vdisplay = fixed_mode->vdisplay;
- adjusted_mode->vsync_start = fixed_mode->vsync_start;
- adjusted_mode->vsync_end = fixed_mode->vsync_end;
- adjusted_mode->vtotal = fixed_mode->vtotal;
- adjusted_mode->clock = fixed_mode->clock;
- drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
- kfree(fixed_mode);
- }
- return true;
-}
-
-static void pyr_dsi_dbi_set_power(struct drm_encoder *encoder, bool on)
-{
- int ret = 0;
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_dbi_output *dbi_output =
- MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
- struct drm_device *dev = encoder->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 reg_offset = 0;
- int pipe = (dbi_output->channel_num == 0) ? 0 : 2;
-
- dev_dbg(dev->dev, "pipe %d : %s, panel on: %s\n", pipe,
- on ? "On" : "Off",
- dbi_output->dbi_panel_on ? "True" : "False");
-
- if (pipe == 2) {
- if (on)
- dev_priv->dual_mipi = true;
- else
- dev_priv->dual_mipi = false;
-
- reg_offset = MIPIC_REG_OFFSET;
- } else {
- if (!on)
- dev_priv->dual_mipi = false;
- }
-
- if (!gma_power_begin(dev, true)) {
- dev_err(dev->dev, "hw begin failed\n");
- return;
- }
-
-
- if (on) {
- if (dbi_output->dbi_panel_on)
- goto out_err;
-
- ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_ON);
- if (ret) {
- dev_err(dev->dev, "power on error\n");
- goto out_err;
- }
-
- dbi_output->dbi_panel_on = true;
-
- if (pipe == 2) {
- dev_priv->dbi_panel_on2 = true;
- } else {
- dev_priv->dbi_panel_on = true;
- mdfld_enable_te(dev, 0);
- }
- } else {
- if (!dbi_output->dbi_panel_on && !dbi_output->first_boot)
- goto out_err;
-
- dbi_output->dbi_panel_on = false;
- dbi_output->first_boot = false;
-
- if (pipe == 2) {
- dev_priv->dbi_panel_on2 = false;
- mdfld_disable_te(dev, 2);
- } else {
- dev_priv->dbi_panel_on = false;
- mdfld_disable_te(dev, 0);
-
- if (dev_priv->dbi_panel_on2)
- mdfld_enable_te(dev, 2);
- }
-
- ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_OFF);
- if (ret) {
- dev_err(dev->dev, "power on error\n");
- goto out_err;
- }
- }
-
-out_err:
- gma_power_end(dev);
-
- if (ret)
- dev_err(dev->dev, "failed\n");
-}
-
-static void pyr_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config,
- int pipe)
-{
- struct drm_device *dev = dsi_config->dev;
- u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0;
- int lane_count = dsi_config->lane_count;
- u32 val = 0;
-
- dev_dbg(dev->dev, "Init DBI interface on pipe %d...\n", pipe);
-
- /* Un-ready device */
- REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000);
-
- /* Init dsi adapter before kicking off */
- REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018);
-
- /* TODO: figure out how to setup these registers */
- REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c600F);
- REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset),
- 0x000a0014);
- REG_WRITE((MIPIA_DBI_BW_CTRL_REG + reg_offset), 0x00000400);
- REG_WRITE((MIPIA_HS_LS_DBI_ENABLE_REG + reg_offset), 0x00000000);
-
- /* Enable all interrupts */
- REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff);
- /* Max value: 20 clock cycles of txclkesc */
- REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x0000001f);
- /* Min 21 txclkesc, max: ffffh */
- REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0x0000ffff);
- /* Min: 7d0 max: 4e20 */
- REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x00000fa0);
-
- /* Set up func_prg */
- val |= lane_count;
- val |= (dsi_config->channel_num << DSI_DBI_VIRT_CHANNEL_OFFSET);
- val |= DSI_DBI_COLOR_FORMAT_OPTION2;
- REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val);
-
- REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), 0x3fffff);
- REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff);
-
- /* De-assert dbi_stall when half of DBI FIFO is empty */
- /* REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000000); */
-
- REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46);
- REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000002);
- REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004);
- REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001);
-}
-
-static void pyr_dsi_dbi_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- int ret = 0;
- struct drm_device *dev = encoder->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_dbi_output *dsi_output =
- MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
- struct mdfld_dsi_config *dsi_config =
- mdfld_dsi_encoder_get_config(dsi_encoder);
- struct mdfld_dsi_connector *dsi_connector = dsi_config->connector;
- int pipe = dsi_connector->pipe;
- u8 param = 0;
-
- /* Regs */
- u32 mipi_reg = MIPI;
- u32 dspcntr_reg = DSPACNTR;
- u32 pipeconf_reg = PIPEACONF;
- u32 reg_offset = 0;
-
- /* Values */
- u32 dspcntr_val = dev_priv->dspcntr;
- u32 pipeconf_val = dev_priv->pipeconf;
- u32 h_active_area = mode->hdisplay;
- u32 v_active_area = mode->vdisplay;
- u32 mipi_val = (PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX |
- TE_TRIGGER_GPIO_PIN);
-
- dev_dbg(dev->dev, "mipi_val =0x%x\n", mipi_val);
-
- dev_dbg(dev->dev, "type %s\n", (pipe == 2) ? "MIPI2" : "MIPI");
- dev_dbg(dev->dev, "h %d v %d\n", mode->hdisplay, mode->vdisplay);
-
- if (pipe == 2) {
- mipi_reg = MIPI_C;
- dspcntr_reg = DSPCCNTR;
- pipeconf_reg = PIPECCONF;
-
- reg_offset = MIPIC_REG_OFFSET;
-
- dspcntr_val = dev_priv->dspcntr2;
- pipeconf_val = dev_priv->pipeconf2;
- } else {
- mipi_val |= 0x2; /* Two lanes for port A and C respectively */
- }
-
- if (!gma_power_begin(dev, true)) {
- dev_err(dev->dev, "hw begin failed\n");
- return;
- }
-
- /* Set up pipe related registers */
- REG_WRITE(mipi_reg, mipi_val);
- REG_READ(mipi_reg);
-
- pyr_dsi_controller_dbi_init(dsi_config, pipe);
-
- msleep(20);
-
- REG_WRITE(dspcntr_reg, dspcntr_val);
- REG_READ(dspcntr_reg);
-
- /* 20ms delay before sending exit_sleep_mode */
- msleep(20);
-
- /* Send exit_sleep_mode DCS */
- ret = mdfld_dsi_dbi_send_dcs(dsi_output, exit_sleep_mode, NULL,
- 0, CMD_DATA_SRC_SYSTEM_MEM);
- if (ret) {
- dev_err(dev->dev, "sent exit_sleep_mode faild\n");
- goto out_err;
- }
-
- /*send set_tear_on DCS*/
- ret = mdfld_dsi_dbi_send_dcs(dsi_output, set_tear_on,
- ¶m, 1, CMD_DATA_SRC_SYSTEM_MEM);
- if (ret) {
- dev_err(dev->dev, "%s - sent set_tear_on faild\n", __func__);
- goto out_err;
- }
-
- /* Do some init stuff */
- mdfld_dsi_brightness_init(dsi_config, pipe);
- mdfld_dsi_gen_fifo_ready(dev, (MIPIA_GEN_FIFO_STAT_REG + reg_offset),
- HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
-
- REG_WRITE(pipeconf_reg, pipeconf_val | PIPEACONF_DSR);
- REG_READ(pipeconf_reg);
-
- /* TODO: this looks ugly, try to move it to CRTC mode setting */
- if (pipe == 2)
- dev_priv->pipeconf2 |= PIPEACONF_DSR;
- else
- dev_priv->pipeconf |= PIPEACONF_DSR;
-
- dev_dbg(dev->dev, "pipeconf %x\n", REG_READ(pipeconf_reg));
-
- ret = mdfld_dsi_dbi_update_area(dsi_output, 0, 0,
- h_active_area - 1, v_active_area - 1);
- if (ret) {
- dev_err(dev->dev, "update area failed\n");
- goto out_err;
- }
-
-out_err:
- gma_power_end(dev);
-
- if (ret)
- dev_err(dev->dev, "mode set failed\n");
- else
- dev_dbg(dev->dev, "mode set done successfully\n");
-}
-
-static void pyr_dsi_dbi_prepare(struct drm_encoder *encoder)
-{
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_dbi_output *dbi_output =
- MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
-
- dbi_output->mode_flags |= MODE_SETTING_IN_ENCODER;
- dbi_output->mode_flags &= ~MODE_SETTING_ENCODER_DONE;
-
- pyr_dsi_dbi_set_power(encoder, false);
-}
-
-static void pyr_dsi_dbi_commit(struct drm_encoder *encoder)
-{
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_dbi_output *dbi_output =
- MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
- struct drm_device *dev = dbi_output->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_drm_dpu_rect rect;
-
- pyr_dsi_dbi_set_power(encoder, true);
-
- dbi_output->mode_flags &= ~MODE_SETTING_IN_ENCODER;
-
- rect.x = rect.y = 0;
- rect.width = 864;
- rect.height = 480;
-
- if (dbi_output->channel_num == 1) {
- dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_2;
- /* If DPU enabled report a fullscreen damage */
- mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEC, &rect);
- } else {
- dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_0;
- mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEA, &rect);
- }
- dbi_output->mode_flags |= MODE_SETTING_ENCODER_DONE;
-}
-
-static void pyr_dsi_dbi_dpms(struct drm_encoder *encoder, int mode)
-{
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_dbi_output *dbi_output =
- MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
- struct drm_device *dev = dbi_output->dev;
-
- dev_dbg(dev->dev, "%s\n", (mode == DRM_MODE_DPMS_ON ? "on" : "off"));
-
- if (mode == DRM_MODE_DPMS_ON)
- pyr_dsi_dbi_set_power(encoder, true);
- else
- pyr_dsi_dbi_set_power(encoder, false);
-}
-
-/*
- * Update the DBI MIPI Panel Frame Buffer.
- */
-static void pyr_dsi_dbi_update_fb(struct mdfld_dsi_dbi_output *dbi_output,
- int pipe)
-{
- struct mdfld_dsi_pkg_sender *sender =
- mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base);
- struct drm_device *dev = dbi_output->dev;
- struct drm_crtc *crtc = dbi_output->base.base.crtc;
- struct psb_intel_crtc *psb_crtc = (crtc) ?
- to_psb_intel_crtc(crtc) : NULL;
-
- u32 dpll_reg = MRST_DPLL_A;
- u32 dspcntr_reg = DSPACNTR;
- u32 pipeconf_reg = PIPEACONF;
- u32 dsplinoff_reg = DSPALINOFF;
- u32 dspsurf_reg = DSPASURF;
- u32 hs_gen_ctrl_reg = HS_GEN_CTRL_REG;
- u32 gen_fifo_stat_reg = GEN_FIFO_STAT_REG;
- u32 reg_offset = 0;
-
- u32 intr_status;
- u32 fifo_stat_reg_val;
- u32 dpll_reg_val;
- u32 dspcntr_reg_val;
- u32 pipeconf_reg_val;
-
- /* If mode setting on-going, back off */
- if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) ||
- (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING) ||
- !(dbi_output->mode_flags & MODE_SETTING_ENCODER_DONE))
- return;
-
- /*
- * Look for errors here. In particular we're checking for whatever
- * error status might have appeared during the last frame transmit
- * (memory write).
- *
- * Normally, the bits we're testing here would be set infrequently,
- * if at all. However, one panel (at least) returns at least one
- * error bit on most frames. So we've disabled the kernel message
- * for now.
- *
- * Still clear whatever error bits are set, except don't clear the
- * ones that would make the Penwell DSI controller reset if we
- * cleared them.
- */
- intr_status = REG_READ(INTR_STAT_REG);
- if ((intr_status & 0x26FFFFFF) != 0) {
- /* dev_err(dev->dev, "DSI status: 0x%08X\n", intr_status); */
- intr_status &= 0x26F3FFFF;
- REG_WRITE(INTR_STAT_REG, intr_status);
- }
-
- if (pipe == 2) {
- dspcntr_reg = DSPCCNTR;
- pipeconf_reg = PIPECCONF;
- dsplinoff_reg = DSPCLINOFF;
- dspsurf_reg = DSPCSURF;
-
- hs_gen_ctrl_reg = HS_GEN_CTRL_REG + MIPIC_REG_OFFSET;
- gen_fifo_stat_reg = GEN_FIFO_STAT_REG + MIPIC_REG_OFFSET,
-
- reg_offset = MIPIC_REG_OFFSET;
- }
-
- if (!gma_power_begin(dev, true)) {
- dev_err(dev->dev, "hw begin failed\n");
- return;
- }
-
- fifo_stat_reg_val = REG_READ(MIPIA_GEN_FIFO_STAT_REG + reg_offset);
- dpll_reg_val = REG_READ(dpll_reg);
- dspcntr_reg_val = REG_READ(dspcntr_reg);
- pipeconf_reg_val = REG_READ(pipeconf_reg);
-
- if (!(fifo_stat_reg_val & (1 << 27)) ||
- (dpll_reg_val & DPLL_VCO_ENABLE) ||
- !(dspcntr_reg_val & DISPLAY_PLANE_ENABLE) ||
- !(pipeconf_reg_val & DISPLAY_PLANE_ENABLE)) {
- goto update_fb_out0;
- }
-
- /* Refresh plane changes */
- REG_WRITE(dsplinoff_reg, REG_READ(dsplinoff_reg));
- REG_WRITE(dspsurf_reg, REG_READ(dspsurf_reg));
- REG_READ(dspsurf_reg);
-
- mdfld_dsi_send_dcs(sender,
- write_mem_start,
- NULL,
- 0,
- CMD_DATA_SRC_PIPE,
- MDFLD_DSI_SEND_PACKAGE);
-
- /*
- * The idea here is to transmit a Generic Read command after the
- * Write Memory Start/Continue commands finish. This asks for
- * the panel to return an "ACK No Errors," or (if it has errors
- * to report) an Error Report. This allows us to monitor the
- * panel's perception of the health of the DSI.
- */
- mdfld_dsi_gen_fifo_ready(dev, gen_fifo_stat_reg,
- HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
- REG_WRITE(hs_gen_ctrl_reg, (1 << WORD_COUNTS_POS) | GEN_READ_0);
-
- dbi_output->dsr_fb_update_done = true;
-update_fb_out0:
- gma_power_end(dev);
-}
-
-/*
- * TODO: will be removed later, should work out display interfaces for power
- */
-void pyr_dsi_adapter_init(struct mdfld_dsi_config *dsi_config, int pipe)
-{
- if (!dsi_config || (pipe != 0 && pipe != 2)) {
- WARN_ON(1);
- return;
- }
- pyr_dsi_controller_dbi_init(dsi_config, pipe);
-}
-
-static int pyr_cmd_get_panel_info(struct drm_device *dev, int pipe,
- struct panel_info *pi)
-{
- if (!dev || !pi)
- return -EINVAL;
-
- pi->width_mm = PYR_PANEL_WIDTH;
- pi->height_mm = PYR_PANEL_HEIGHT;
-
- return 0;
-}
-
-/* PYR DBI encoder helper funcs */
-static const struct drm_encoder_helper_funcs pyr_dsi_dbi_helper_funcs = {
- .dpms = pyr_dsi_dbi_dpms,
- .mode_fixup = pyr_dsi_dbi_mode_fixup,
- .prepare = pyr_dsi_dbi_prepare,
- .mode_set = pyr_dsi_dbi_mode_set,
- .commit = pyr_dsi_dbi_commit,
-};
-
-/* PYR DBI encoder funcs */
-static const struct drm_encoder_funcs mdfld_dsi_dbi_encoder_funcs = {
- .destroy = drm_encoder_cleanup,
-};
-
-void pyr_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs)
-{
- p_funcs->encoder_funcs = &mdfld_dsi_dbi_encoder_funcs;
- p_funcs->encoder_helper_funcs = &pyr_dsi_dbi_helper_funcs;
- p_funcs->get_config_mode = &pyr_cmd_get_config_mode;
- p_funcs->update_fb = pyr_dsi_dbi_update_fb;
- p_funcs->get_panel_info = pyr_cmd_get_panel_info;
-}
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Jim Liu <jim.liu@intel.com>
- * Jackie Li<yaodong.li@intel.com>
- * Gideon Eaton <eaton.
- * Scott Rowe <scott.m.rowe@intel.com>
- */
-
-#include "mdfld_dsi_dbi.h"
-#include "mdfld_dsi_dpi.h"
-#include "mdfld_dsi_output.h"
-#include "mdfld_output.h"
-
-#include "mdfld_dsi_pkg_sender.h"
-
-#include "displays/tmd_vid.h"
-
-/* FIXME: static ? */
-struct drm_display_mode *tmd_vid_get_config_mode(struct drm_device *dev)
-{
- struct drm_display_mode *mode;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_timing_info *ti = &dev_priv->gct_data.DTD;
- bool use_gct = false; /*Disable GCT for now*/
-
- mode = kzalloc(sizeof(*mode), GFP_KERNEL);
- if (!mode) {
- dev_err(dev->dev, "Out of memory\n");
- return NULL;
- }
-
- if (use_gct) {
- dev_dbg(dev->dev, "gct find MIPI panel.\n");
-
- mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
- mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
- mode->hsync_start = mode->hdisplay +
- ((ti->hsync_offset_hi << 8) |
- ti->hsync_offset_lo);
- mode->hsync_end = mode->hsync_start +
- ((ti->hsync_pulse_width_hi << 8) |
- ti->hsync_pulse_width_lo);
- mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) |
- ti->hblank_lo);
- mode->vsync_start = \
- mode->vdisplay + ((ti->vsync_offset_hi << 8) |
- ti->vsync_offset_lo);
- mode->vsync_end = \
- mode->vsync_start + ((ti->vsync_pulse_width_hi << 8) | \
- ti->vsync_pulse_width_lo);
- mode->vtotal = mode->vdisplay +
- ((ti->vblank_hi << 8) | ti->vblank_lo);
- mode->clock = ti->pixel_clock * 10;
-
- dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay);
- dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay);
- dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start);
- dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end);
- dev_dbg(dev->dev, "htotal is %d\n", mode->htotal);
- dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start);
- dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end);
- dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal);
- dev_dbg(dev->dev, "clock is %d\n", mode->clock);
- } else {
- mode->hdisplay = 480;
- mode->vdisplay = 854;
- mode->hsync_start = 487;
- mode->hsync_end = 490;
- mode->htotal = 499;
- mode->vsync_start = 861;
- mode->vsync_end = 865;
- mode->vtotal = 873;
- mode->clock = 33264;
- }
- drm_mode_set_name(mode);
- drm_mode_set_crtcinfo(mode, 0);
-
- mode->type |= DRM_MODE_TYPE_PREFERRED;
-
- return mode;
-}
-
-static int tmd_vid_get_panel_info(struct drm_device *dev,
- int pipe,
- struct panel_info *pi)
-{
- if (!dev || !pi)
- return -EINVAL;
-
- pi->width_mm = TMD_PANEL_WIDTH;
- pi->height_mm = TMD_PANEL_HEIGHT;
-
- return 0;
-}
-
-/*
- * mdfld_init_TMD_MIPI - initialise a TMD interface
- * @dsi_config: configuration
- * @pipe: pipe to configure
- *
- * This function is called only by mrst_dsi_mode_set and
- * restore_display_registers. since this function does not
- * acquire the mutex, it is important that the calling function
- * does!
- */
-
-
-static void mdfld_dsi_tmd_drv_ic_init(struct mdfld_dsi_config *dsi_config,
- int pipe)
-{
- static u32 tmd_cmd_mcap_off[] = {0x000000b2};
- static u32 tmd_cmd_enable_lane_switch[] = {0x000101ef};
- static u32 tmd_cmd_set_lane_num[] = {0x006360ef};
- static u32 tmd_cmd_pushing_clock0[] = {0x00cc2fef};
- static u32 tmd_cmd_pushing_clock1[] = {0x00dd6eef};
- static u32 tmd_cmd_set_mode[] = {0x000000b3};
- static u32 tmd_cmd_set_sync_pulse_mode[] = {0x000961ef};
- static u32 tmd_cmd_set_column[] = {0x0100002a, 0x000000df};
- static u32 tmd_cmd_set_page[] = {0x0300002b, 0x00000055};
- static u32 tmd_cmd_set_video_mode[] = {0x00000153};
- /*no auto_bl,need add in furture*/
- static u32 tmd_cmd_enable_backlight[] = {0x00005ab4};
- static u32 tmd_cmd_set_backlight_dimming[] = {0x00000ebd};
-
- struct mdfld_dsi_pkg_sender *sender
- = mdfld_dsi_get_pkg_sender(dsi_config);
-
- DRM_INFO("Enter mdfld init TMD MIPI display.\n");
-
- if (!sender) {
- DRM_ERROR("Cannot get sender\n");
- return;
- }
-
- if (dsi_config->dvr_ic_inited)
- return;
-
- msleep(3);
-
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_mcap_off, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_enable_lane_switch, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_lane_num, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_pushing_clock0, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_pushing_clock1, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_mode, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_sync_pulse_mode, 1, 0);
- mdfld_dsi_send_mcs_long_lp(sender, tmd_cmd_set_column, 2, 0);
- mdfld_dsi_send_mcs_long_lp(sender, tmd_cmd_set_page, 2, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_video_mode, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_enable_backlight, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_backlight_dimming, 1, 0);
-
- dsi_config->dvr_ic_inited = 1;
-}
-
-/* TMD DPI encoder helper funcs */
-static const struct drm_encoder_helper_funcs
- mdfld_tpo_dpi_encoder_helper_funcs = {
- .dpms = mdfld_dsi_dpi_dpms,
- .mode_fixup = mdfld_dsi_dpi_mode_fixup,
- .prepare = mdfld_dsi_dpi_prepare,
- .mode_set = mdfld_dsi_dpi_mode_set,
- .commit = mdfld_dsi_dpi_commit,
-};
-
-/* TMD DPI encoder funcs */
-static const struct drm_encoder_funcs mdfld_tpo_dpi_encoder_funcs = {
- .destroy = drm_encoder_cleanup,
-};
-
-void tmd_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs)
-{
- if (!dev || !p_funcs) {
- dev_err(dev->dev, "Invalid parameters\n");
- return;
- }
-
- p_funcs->encoder_funcs = &mdfld_tpo_dpi_encoder_funcs;
- p_funcs->encoder_helper_funcs = &mdfld_tpo_dpi_encoder_helper_funcs;
- p_funcs->get_config_mode = &tmd_vid_get_config_mode;
- p_funcs->update_fb = NULL;
- p_funcs->get_panel_info = tmd_vid_get_panel_info;
- p_funcs->reset = mdfld_dsi_panel_reset;
- p_funcs->drv_ic_init = mdfld_dsi_tmd_drv_ic_init;
-}
+++ /dev/null
-/*
- * Copyright (c) 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
- */
-
-#include "mdfld_dsi_dbi.h"
-#include "mdfld_dsi_dpi.h"
-#include "mdfld_dsi_output.h"
-#include "mdfld_output.h"
-#include "mdfld_dsi_dbi_dpu.h"
-#include "mdfld_dsi_pkg_sender.h"
-
-#include "displays/tpo_cmd.h"
-
-static struct drm_display_mode *tpo_cmd_get_config_mode(struct drm_device *dev)
-{
- struct drm_display_mode *mode;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_timing_info *ti = &dev_priv->gct_data.DTD;
- bool use_gct = false;
-
- mode = kzalloc(sizeof(*mode), GFP_KERNEL);
- if (!mode)
- return NULL;
-
- if (use_gct) {
- dev_dbg(dev->dev, "gct find MIPI panel.\n");
-
- mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
- mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
- mode->hsync_start = mode->hdisplay + \
- ((ti->hsync_offset_hi << 8) | \
- ti->hsync_offset_lo);
- mode->hsync_end = mode->hsync_start + \
- ((ti->hsync_pulse_width_hi << 8) | \
- ti->hsync_pulse_width_lo);
- mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \
- ti->hblank_lo);
- mode->vsync_start = \
- mode->vdisplay + ((ti->vsync_offset_hi << 8) | \
- ti->vsync_offset_lo);
- mode->vsync_end = \
- mode->vsync_start + ((ti->vsync_pulse_width_hi << 8) | \
- ti->vsync_pulse_width_lo);
- mode->vtotal = mode->vdisplay + \
- ((ti->vblank_hi << 8) | ti->vblank_lo);
- mode->clock = ti->pixel_clock * 10;
-
- dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay);
- dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay);
- dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start);
- dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end);
- dev_dbg(dev->dev, "htotal is %d\n", mode->htotal);
- dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start);
- dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end);
- dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal);
- dev_dbg(dev->dev, "clock is %d\n", mode->clock);
- } else {
- mode->hdisplay = 864;
- mode->vdisplay = 480;
- mode->hsync_start = 872;
- mode->hsync_end = 876;
- mode->htotal = 884;
- mode->vsync_start = 482;
- mode->vsync_end = 494;
- mode->vtotal = 486;
- mode->clock = 25777;
- }
-
- drm_mode_set_name(mode);
- drm_mode_set_crtcinfo(mode, 0);
-
- mode->type |= DRM_MODE_TYPE_PREFERRED;
-
- return mode;
-}
-
-static bool mdfld_dsi_dbi_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct drm_display_mode *fixed_mode = tpo_cmd_get_config_mode(dev);
-
- if (fixed_mode) {
- adjusted_mode->hdisplay = fixed_mode->hdisplay;
- adjusted_mode->hsync_start = fixed_mode->hsync_start;
- adjusted_mode->hsync_end = fixed_mode->hsync_end;
- adjusted_mode->htotal = fixed_mode->htotal;
- adjusted_mode->vdisplay = fixed_mode->vdisplay;
- adjusted_mode->vsync_start = fixed_mode->vsync_start;
- adjusted_mode->vsync_end = fixed_mode->vsync_end;
- adjusted_mode->vtotal = fixed_mode->vtotal;
- adjusted_mode->clock = fixed_mode->clock;
- drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
- kfree(fixed_mode);
- }
- return true;
-}
-
-static void mdfld_dsi_dbi_set_power(struct drm_encoder *encoder, bool on)
-{
- int ret = 0;
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_dbi_output *dbi_output =
- MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
- struct mdfld_dsi_config *dsi_config =
- mdfld_dsi_encoder_get_config(dsi_encoder);
- struct mdfld_dsi_pkg_sender *sender =
- mdfld_dsi_encoder_get_pkg_sender(dsi_encoder);
- struct drm_device *dev = encoder->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 reg_offset = 0;
- int pipe = (dbi_output->channel_num == 0) ? 0 : 2;
- u32 data = 0;
-
- dev_dbg(dev->dev, "pipe %d : %s, panel on: %s\n",
- pipe, on ? "On" : "Off",
- dbi_output->dbi_panel_on ? "True" : "False");
-
- if (pipe == 2) {
- if (on)
- dev_priv->dual_mipi = true;
- else
- dev_priv->dual_mipi = false;
- reg_offset = MIPIC_REG_OFFSET;
- } else {
- if (!on)
- dev_priv->dual_mipi = false;
- }
-
- if (!gma_power_begin(dev, true)) {
- dev_err(dev->dev, "hw begin failed\n");
- return;
- }
-
- if (on) {
- if (dbi_output->dbi_panel_on)
- goto out_err;
-
- ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_ON);
- if (ret) {
- dev_err(dev->dev, "power on error\n");
- goto out_err;
- }
-
- dbi_output->dbi_panel_on = true;
-
- if (pipe == 2)
- dev_priv->dbi_panel_on2 = true;
- else
- dev_priv->dbi_panel_on = true;
- mdfld_enable_te(dev, pipe);
- } else {
- if (!dbi_output->dbi_panel_on && !dbi_output->first_boot)
- goto out_err;
-
- dbi_output->dbi_panel_on = false;
- dbi_output->first_boot = false;
-
- if (pipe == 2)
- dev_priv->dbi_panel_on2 = false;
- else
- dev_priv->dbi_panel_on = false;
-
- mdfld_disable_te(dev, pipe);
-
- ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_OFF);
- if (ret) {
- dev_err(dev->dev, "power on error\n");
- goto out_err;
- }
- }
-
- /*
- * FIXME: this is a WA for TPO panel crash on DPMS on & off around
- * 83 times. the root cause of this issue is that Booster in
- * drvIC crashed. Add this WA so that we can resume the driver IC
- * once we found that booster has a fault
- */
- mdfld_dsi_get_power_mode(dsi_config,
- &data,
- MDFLD_DSI_HS_TRANSMISSION);
-
- if (on && data && !(data & (1 << 7))) {
- /* Soft reset */
- mdfld_dsi_send_dcs(sender,
- DCS_SOFT_RESET,
- NULL,
- 0,
- CMD_DATA_SRC_PIPE,
- MDFLD_DSI_SEND_PACKAGE);
-
- /* Init drvIC */
- if (dbi_output->p_funcs->drv_ic_init)
- dbi_output->p_funcs->drv_ic_init(dsi_config,
- pipe);
- }
-
-out_err:
- gma_power_end(dev);
- if (ret)
- dev_err(dev->dev, "failed\n");
-}
-
-
-static void mdfld_dsi_dbi_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- int ret = 0;
- struct drm_device *dev = encoder->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_dbi_output *dsi_output =
- MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
- struct mdfld_dsi_config *dsi_config =
- mdfld_dsi_encoder_get_config(dsi_encoder);
- struct mdfld_dsi_connector *dsi_connector = dsi_config->connector;
- int pipe = dsi_connector->pipe;
- u8 param = 0;
-
- /* Regs */
- u32 mipi_reg = MIPI;
- u32 dspcntr_reg = DSPACNTR;
- u32 pipeconf_reg = PIPEACONF;
- u32 reg_offset = 0;
-
- /* Values */
- u32 dspcntr_val = dev_priv->dspcntr;
- u32 pipeconf_val = dev_priv->pipeconf;
- u32 h_active_area = mode->hdisplay;
- u32 v_active_area = mode->vdisplay;
- u32 mipi_val;
-
- mipi_val = (PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX |
- TE_TRIGGER_GPIO_PIN);
-
- dev_dbg(dev->dev, "mipi_val =0x%x\n", mipi_val);
-
- dev_dbg(dev->dev, "type %s\n", (pipe == 2) ? "MIPI2" : "MIPI");
- dev_dbg(dev->dev, "h %d v %d\n", mode->hdisplay, mode->vdisplay);
-
- if (pipe == 2) {
- mipi_reg = MIPI_C;
- dspcntr_reg = DSPCCNTR;
- pipeconf_reg = PIPECCONF;
-
- reg_offset = MIPIC_REG_OFFSET;
-
- dspcntr_val = dev_priv->dspcntr2;
- pipeconf_val = dev_priv->pipeconf2;
- } else {
- mipi_val |= 0x2; /*two lanes for port A and C respectively*/
- }
-
- if (!gma_power_begin(dev, true)) {
- dev_err(dev->dev, "hw begin failed\n");
- return;
- }
-
- REG_WRITE(dspcntr_reg, dspcntr_val);
- REG_READ(dspcntr_reg);
-
- /* 20ms delay before sending exit_sleep_mode */
- msleep(20);
-
- /* Send exit_sleep_mode DCS */
- ret = mdfld_dsi_dbi_send_dcs(dsi_output, DCS_EXIT_SLEEP_MODE,
- NULL, 0, CMD_DATA_SRC_SYSTEM_MEM);
- if (ret) {
- dev_err(dev->dev, "sent exit_sleep_mode faild\n");
- goto out_err;
- }
-
- /* Send set_tear_on DCS */
- ret = mdfld_dsi_dbi_send_dcs(dsi_output, DCS_SET_TEAR_ON,
- ¶m, 1, CMD_DATA_SRC_SYSTEM_MEM);
- if (ret) {
- dev_err(dev->dev, "%s - sent set_tear_on faild\n", __func__);
- goto out_err;
- }
-
- /* Do some init stuff */
- REG_WRITE(pipeconf_reg, pipeconf_val | PIPEACONF_DSR);
- REG_READ(pipeconf_reg);
-
- /* TODO: this looks ugly, try to move it to CRTC mode setting*/
- if (pipe == 2)
- dev_priv->pipeconf2 |= PIPEACONF_DSR;
- else
- dev_priv->pipeconf |= PIPEACONF_DSR;
-
- dev_dbg(dev->dev, "pipeconf %x\n", REG_READ(pipeconf_reg));
-
- ret = mdfld_dsi_dbi_update_area(dsi_output, 0, 0,
- h_active_area - 1, v_active_area - 1);
- if (ret) {
- dev_err(dev->dev, "update area failed\n");
- goto out_err;
- }
-
-out_err:
- gma_power_end(dev);
-
- if (ret)
- dev_err(dev->dev, "mode set failed\n");
-}
-
-static void mdfld_dsi_dbi_prepare(struct drm_encoder *encoder)
-{
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_dbi_output *dbi_output
- = MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
-
- dbi_output->mode_flags |= MODE_SETTING_IN_ENCODER;
- dbi_output->mode_flags &= ~MODE_SETTING_ENCODER_DONE;
-
- mdfld_dsi_dbi_set_power(encoder, false);
-}
-
-static void mdfld_dsi_dbi_commit(struct drm_encoder *encoder)
-{
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_dbi_output *dbi_output =
- MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
- struct drm_device *dev = dbi_output->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_drm_dpu_rect rect;
-
- mdfld_dsi_dbi_set_power(encoder, true);
- dbi_output->mode_flags &= ~MODE_SETTING_IN_ENCODER;
-
- rect.x = rect.y = 0;
- rect.width = 864;
- rect.height = 480;
-
- if (dbi_output->channel_num == 1) {
- dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_2;
- /*if dpu enabled report a fullscreen damage*/
- mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEC, &rect);
- } else {
- dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_0;
- mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEA, &rect);
- }
- dbi_output->mode_flags |= MODE_SETTING_ENCODER_DONE;
-}
-
-static void mdfld_dsi_dbi_dpms(struct drm_encoder *encoder, int mode)
-{
- struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
- struct mdfld_dsi_dbi_output *dbi_output
- = MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
- struct drm_device *dev = dbi_output->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- static bool bdispoff;
-
- dev_dbg(dev->dev, "%s\n", (mode == DRM_MODE_DPMS_ON ? "on" : "off"));
-
- if (mode == DRM_MODE_DPMS_ON) {
- /*
- * FIXME: in case I am wrong!
- * we don't need to exit dsr here to wake up plane/pipe/pll
- * if everything goes right, hw_begin will resume them all
- * during set_power.
- */
- if (bdispoff /* FIXME && gbgfxsuspended */) {
- mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_2D_3D);
- bdispoff = false;
- dev_priv->dispstatus = true;
- }
-
- mdfld_dsi_dbi_set_power(encoder, true);
- /* FIXME if (gbgfxsuspended)
- gbgfxsuspended = false; */
- } else {
- /*
- * I am not sure whether this is the perfect place to
- * turn rpm on since we still have a lot of CRTC turnning
- * on work to do.
- */
- bdispoff = true;
- dev_priv->dispstatus = false;
- mdfld_dsi_dbi_set_power(encoder, false);
- }
-}
-
-
-/*
- * Update the DBI MIPI Panel Frame Buffer.
- */
-static void mdfld_dsi_dbi_update_fb(struct mdfld_dsi_dbi_output *dbi_output,
- int pipe)
-{
- struct mdfld_dsi_pkg_sender *sender =
- mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base);
- struct drm_device *dev = dbi_output->dev;
- struct drm_crtc *crtc = dbi_output->base.base.crtc;
- struct psb_intel_crtc *psb_crtc = (crtc) ?
- to_psb_intel_crtc(crtc) : NULL;
- u32 dpll_reg = MRST_DPLL_A;
- u32 dspcntr_reg = DSPACNTR;
- u32 pipeconf_reg = PIPEACONF;
- u32 dsplinoff_reg = DSPALINOFF;
- u32 dspsurf_reg = DSPASURF;
- u32 reg_offset = 0;
-
- /* If mode setting on-going, back off */
- if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) ||
- (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING) ||
- !(dbi_output->mode_flags & MODE_SETTING_ENCODER_DONE))
- return;
-
- if (pipe == 2) {
- dspcntr_reg = DSPCCNTR;
- pipeconf_reg = PIPECCONF;
- dsplinoff_reg = DSPCLINOFF;
- dspsurf_reg = DSPCSURF;
- reg_offset = MIPIC_REG_OFFSET;
- }
-
- if (!gma_power_begin(dev, true)) {
- dev_err(dev->dev, "hw begin failed\n");
- return;
- }
-
- /* Check DBI FIFO status */
- if (!(REG_READ(dpll_reg) & DPLL_VCO_ENABLE) ||
- !(REG_READ(dspcntr_reg) & DISPLAY_PLANE_ENABLE) ||
- !(REG_READ(pipeconf_reg) & DISPLAY_PLANE_ENABLE))
- goto update_fb_out0;
-
- /* Refresh plane changes */
- REG_WRITE(dsplinoff_reg, REG_READ(dsplinoff_reg));
- REG_WRITE(dspsurf_reg, REG_READ(dspsurf_reg));
- REG_READ(dspsurf_reg);
-
- mdfld_dsi_send_dcs(sender,
- DCS_WRITE_MEM_START,
- NULL,
- 0,
- CMD_DATA_SRC_PIPE,
- MDFLD_DSI_SEND_PACKAGE);
-
- dbi_output->dsr_fb_update_done = true;
-update_fb_out0:
- gma_power_end(dev);
-}
-
-static int tpo_cmd_get_panel_info(struct drm_device *dev,
- int pipe,
- struct panel_info *pi)
-{
- if (!dev || !pi)
- return -EINVAL;
-
- pi->width_mm = TPO_PANEL_WIDTH;
- pi->height_mm = TPO_PANEL_HEIGHT;
-
- return 0;
-}
-
-
-/* TPO DBI encoder helper funcs */
-static const struct drm_encoder_helper_funcs mdfld_dsi_dbi_helper_funcs = {
- .dpms = mdfld_dsi_dbi_dpms,
- .mode_fixup = mdfld_dsi_dbi_mode_fixup,
- .prepare = mdfld_dsi_dbi_prepare,
- .mode_set = mdfld_dsi_dbi_mode_set,
- .commit = mdfld_dsi_dbi_commit,
-};
-
-/* TPO DBI encoder funcs */
-static const struct drm_encoder_funcs mdfld_dsi_dbi_encoder_funcs = {
- .destroy = drm_encoder_cleanup,
-};
-
-void tpo_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs)
-{
- p_funcs->encoder_funcs = &mdfld_dsi_dbi_encoder_funcs;
- p_funcs->encoder_helper_funcs = &mdfld_dsi_dbi_helper_funcs;
- p_funcs->get_config_mode = &tpo_cmd_get_config_mode;
- p_funcs->update_fb = mdfld_dsi_dbi_update_fb;
- p_funcs->get_panel_info = tpo_cmd_get_panel_info;
- p_funcs->reset = mdfld_dsi_panel_reset;
- p_funcs->drv_ic_init = mdfld_dsi_brightness_init;
-}
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * jim liu <jim.liu@intel.com>
- * Jackie Li<yaodong.li@intel.com>
- */
-
-#include "mdfld_dsi_dbi.h"
-#include "mdfld_dsi_dpi.h"
-#include "mdfld_dsi_output.h"
-#include "mdfld_output.h"
-
-#include "mdfld_dsi_pkg_sender.h"
-
-#include "displays/tpo_vid.h"
-
-static struct drm_display_mode *tpo_vid_get_config_mode(struct drm_device *dev)
-{
- struct drm_display_mode *mode;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_timing_info *ti = &dev_priv->gct_data.DTD;
- bool use_gct = false;
-
- mode = kzalloc(sizeof(*mode), GFP_KERNEL);
- if (!mode) {
- dev_err(dev->dev, "out of memory\n");
- return NULL;
- }
-
- if (use_gct) {
- mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
- mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
- mode->hsync_start = mode->hdisplay + \
- ((ti->hsync_offset_hi << 8) | \
- ti->hsync_offset_lo);
- mode->hsync_end = mode->hsync_start + \
- ((ti->hsync_pulse_width_hi << 8) | \
- ti->hsync_pulse_width_lo);
- mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \
- ti->hblank_lo);
- mode->vsync_start = \
- mode->vdisplay + ((ti->vsync_offset_hi << 8) | \
- ti->vsync_offset_lo);
- mode->vsync_end = \
- mode->vsync_start + ((ti->vsync_pulse_width_hi << 8) | \
- ti->vsync_pulse_width_lo);
- mode->vtotal = mode->vdisplay + \
- ((ti->vblank_hi << 8) | ti->vblank_lo);
- mode->clock = ti->pixel_clock * 10;
-
- dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay);
- dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay);
- dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start);
- dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end);
- dev_dbg(dev->dev, "htotal is %d\n", mode->htotal);
- dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start);
- dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end);
- dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal);
- dev_dbg(dev->dev, "clock is %d\n", mode->clock);
- } else {
- mode->hdisplay = 864;
- mode->vdisplay = 480;
- mode->hsync_start = 873;
- mode->hsync_end = 876;
- mode->htotal = 887;
- mode->vsync_start = 487;
- mode->vsync_end = 490;
- mode->vtotal = 499;
- mode->clock = 33264;
- }
-
- drm_mode_set_name(mode);
- drm_mode_set_crtcinfo(mode, 0);
-
- mode->type |= DRM_MODE_TYPE_PREFERRED;
-
- return mode;
-}
-
-static int tpo_vid_get_panel_info(struct drm_device *dev,
- int pipe,
- struct panel_info *pi)
-{
- if (!dev || !pi)
- return -EINVAL;
-
- pi->width_mm = TPO_PANEL_WIDTH;
- pi->height_mm = TPO_PANEL_HEIGHT;
-
- return 0;
-}
-
-/*TPO DPI encoder helper funcs*/
-static const struct drm_encoder_helper_funcs
- mdfld_tpo_dpi_encoder_helper_funcs = {
- .dpms = mdfld_dsi_dpi_dpms,
- .mode_fixup = mdfld_dsi_dpi_mode_fixup,
- .prepare = mdfld_dsi_dpi_prepare,
- .mode_set = mdfld_dsi_dpi_mode_set,
- .commit = mdfld_dsi_dpi_commit,
-};
-
-/*TPO DPI encoder funcs*/
-static const struct drm_encoder_funcs mdfld_tpo_dpi_encoder_funcs = {
- .destroy = drm_encoder_cleanup,
-};
-
-void tpo_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs)
-{
- if (!dev || !p_funcs) {
- dev_err(dev->dev, "tpo_vid_init: Invalid parameters\n");
- return;
- }
-
- p_funcs->encoder_funcs = &mdfld_tpo_dpi_encoder_funcs;
- p_funcs->encoder_helper_funcs = &mdfld_tpo_dpi_encoder_helper_funcs;
- p_funcs->get_config_mode = &tpo_vid_get_config_mode;
- p_funcs->update_fb = NULL;
- p_funcs->get_panel_info = tpo_vid_get_panel_info;
-}
+++ /dev/null
-/*
- * Copyright © 2011 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- */
-
-/* Medfield DSI controller registers */
-
-#define MIPIA_DEVICE_READY_REG 0xb000
-#define MIPIA_INTR_STAT_REG 0xb004
-#define MIPIA_INTR_EN_REG 0xb008
-#define MIPIA_DSI_FUNC_PRG_REG 0xb00c
-#define MIPIA_HS_TX_TIMEOUT_REG 0xb010
-#define MIPIA_LP_RX_TIMEOUT_REG 0xb014
-#define MIPIA_TURN_AROUND_TIMEOUT_REG 0xb018
-#define MIPIA_DEVICE_RESET_TIMER_REG 0xb01c
-#define MIPIA_DPI_RESOLUTION_REG 0xb020
-#define MIPIA_DBI_FIFO_THROTTLE_REG 0xb024
-#define MIPIA_HSYNC_COUNT_REG 0xb028
-#define MIPIA_HBP_COUNT_REG 0xb02c
-#define MIPIA_HFP_COUNT_REG 0xb030
-#define MIPIA_HACTIVE_COUNT_REG 0xb034
-#define MIPIA_VSYNC_COUNT_REG 0xb038
-#define MIPIA_VBP_COUNT_REG 0xb03c
-#define MIPIA_VFP_COUNT_REG 0xb040
-#define MIPIA_HIGH_LOW_SWITCH_COUNT_REG 0xb044
-#define MIPIA_DPI_CONTROL_REG 0xb048
-#define MIPIA_DPI_DATA_REG 0xb04c
-#define MIPIA_INIT_COUNT_REG 0xb050
-#define MIPIA_MAX_RETURN_PACK_SIZE_REG 0xb054
-#define MIPIA_VIDEO_MODE_FORMAT_REG 0xb058
-#define MIPIA_EOT_DISABLE_REG 0xb05c
-#define MIPIA_LP_BYTECLK_REG 0xb060
-#define MIPIA_LP_GEN_DATA_REG 0xb064
-#define MIPIA_HS_GEN_DATA_REG 0xb068
-#define MIPIA_LP_GEN_CTRL_REG 0xb06c
-#define MIPIA_HS_GEN_CTRL_REG 0xb070
-#define MIPIA_GEN_FIFO_STAT_REG 0xb074
-#define MIPIA_HS_LS_DBI_ENABLE_REG 0xb078
-#define MIPIA_DPHY_PARAM_REG 0xb080
-#define MIPIA_DBI_BW_CTRL_REG 0xb084
-#define MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG 0xb088
-
-#define DSI_DEVICE_READY (0x1)
-#define DSI_POWER_STATE_ULPS_ENTER (0x2 << 1)
-#define DSI_POWER_STATE_ULPS_EXIT (0x1 << 1)
-#define DSI_POWER_STATE_ULPS_OFFSET (0x1)
-
-
-#define DSI_ONE_DATA_LANE (0x1)
-#define DSI_TWO_DATA_LANE (0x2)
-#define DSI_THREE_DATA_LANE (0X3)
-#define DSI_FOUR_DATA_LANE (0x4)
-#define DSI_DPI_VIRT_CHANNEL_OFFSET (0x3)
-#define DSI_DBI_VIRT_CHANNEL_OFFSET (0x5)
-#define DSI_DPI_COLOR_FORMAT_RGB565 (0x01 << 7)
-#define DSI_DPI_COLOR_FORMAT_RGB666 (0x02 << 7)
-#define DSI_DPI_COLOR_FORMAT_RGB666_UNPACK (0x03 << 7)
-#define DSI_DPI_COLOR_FORMAT_RGB888 (0x04 << 7)
-#define DSI_DBI_COLOR_FORMAT_OPTION2 (0x05 << 13)
-
-#define DSI_INTR_STATE_RXSOTERROR 1
-
-#define DSI_INTR_STATE_SPL_PKG_SENT (1 << 30)
-#define DSI_INTR_STATE_TE (1 << 31)
-
-#define DSI_HS_TX_TIMEOUT_MASK (0xffffff)
-
-#define DSI_LP_RX_TIMEOUT_MASK (0xffffff)
-
-#define DSI_TURN_AROUND_TIMEOUT_MASK (0x3f)
-
-#define DSI_RESET_TIMER_MASK (0xffff)
-
-#define DSI_DBI_FIFO_WM_HALF (0x0)
-#define DSI_DBI_FIFO_WM_QUARTER (0x1)
-#define DSI_DBI_FIFO_WM_LOW (0x2)
-
-#define DSI_DPI_TIMING_MASK (0xffff)
-
-#define DSI_INIT_TIMER_MASK (0xffff)
-
-#define DSI_DBI_RETURN_PACK_SIZE_MASK (0x3ff)
-
-#define DSI_LP_BYTECLK_MASK (0x0ffff)
-
-#define DSI_HS_CTRL_GEN_SHORT_W0 (0x03)
-#define DSI_HS_CTRL_GEN_SHORT_W1 (0x13)
-#define DSI_HS_CTRL_GEN_SHORT_W2 (0x23)
-#define DSI_HS_CTRL_GEN_R0 (0x04)
-#define DSI_HS_CTRL_GEN_R1 (0x14)
-#define DSI_HS_CTRL_GEN_R2 (0x24)
-#define DSI_HS_CTRL_GEN_LONG_W (0x29)
-#define DSI_HS_CTRL_MCS_SHORT_W0 (0x05)
-#define DSI_HS_CTRL_MCS_SHORT_W1 (0x15)
-#define DSI_HS_CTRL_MCS_R0 (0x06)
-#define DSI_HS_CTRL_MCS_LONG_W (0x39)
-#define DSI_HS_CTRL_VC_OFFSET (0x06)
-#define DSI_HS_CTRL_WC_OFFSET (0x08)
-
-#define DSI_FIFO_GEN_HS_DATA_FULL (1 << 0)
-#define DSI_FIFO_GEN_HS_DATA_HALF_EMPTY (1 << 1)
-#define DSI_FIFO_GEN_HS_DATA_EMPTY (1 << 2)
-#define DSI_FIFO_GEN_LP_DATA_FULL (1 << 8)
-#define DSI_FIFO_GEN_LP_DATA_HALF_EMPTY (1 << 9)
-#define DSI_FIFO_GEN_LP_DATA_EMPTY (1 << 10)
-#define DSI_FIFO_GEN_HS_CTRL_FULL (1 << 16)
-#define DSI_FIFO_GEN_HS_CTRL_HALF_EMPTY (1 << 17)
-#define DSI_FIFO_GEN_HS_CTRL_EMPTY (1 << 18)
-#define DSI_FIFO_GEN_LP_CTRL_FULL (1 << 24)
-#define DSI_FIFO_GEN_LP_CTRL_HALF_EMPTY (1 << 25)
-#define DSI_FIFO_GEN_LP_CTRL_EMPTY (1 << 26)
-#define DSI_FIFO_DBI_EMPTY (1 << 27)
-#define DSI_FIFO_DPI_EMPTY (1 << 28)
-
-#define DSI_DBI_HS_LP_SWITCH_MASK (0x1)
-
-#define DSI_HS_LP_SWITCH_COUNTER_OFFSET (0x0)
-#define DSI_LP_HS_SWITCH_COUNTER_OFFSET (0x16)
-
-#define DSI_DPI_CTRL_HS_SHUTDOWN (0x00000001)
-#define DSI_DPI_CTRL_HS_TURN_ON (0x00000002)
-
-/* Medfield DSI adapter registers */
-#define MIPIA_CONTROL_REG 0xb104
-#define MIPIA_DATA_ADD_REG 0xb108
-#define MIPIA_DATA_LEN_REG 0xb10c
-#define MIPIA_CMD_ADD_REG 0xb110
-#define MIPIA_CMD_LEN_REG 0xb114
-
-/*dsi power modes*/
-#define DSI_POWER_MODE_DISPLAY_ON (1 << 2)
-#define DSI_POWER_MODE_NORMAL_ON (1 << 3)
-#define DSI_POWER_MODE_SLEEP_OUT (1 << 4)
-#define DSI_POWER_MODE_PARTIAL_ON (1 << 5)
-#define DSI_POWER_MODE_IDLE_ON (1 << 6)
-
-enum {
- MDFLD_DSI_ENCODER_DBI = 0,
- MDFLD_DSI_ENCODER_DPI,
-};
-
-enum {
- MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_PULSE = 1,
- MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_EVENTS = 2,
- MDFLD_DSI_VIDEO_BURST_MODE = 3,
-};
-
-#define DSI_DPI_COMPLETE_LAST_LINE (1 << 2)
-#define DSI_DPI_DISABLE_BTA (1 << 3)
-/* Panel types */
-enum {
- TPO_CMD,
- TPO_VID,
- TMD_CMD,
- TMD_VID,
- PYR_CMD,
- PYR_VID,
- TPO,
- TMD,
- PYR,
- HDMI,
- GCT_DETECT
-};
-
-/* Junk that belongs elsewhere */
-#define TPO_PANEL_WIDTH 84
-#define TPO_PANEL_HEIGHT 46
-#define TMD_PANEL_WIDTH 39
-#define TMD_PANEL_HEIGHT 71
-#define PYR_PANEL_WIDTH 53
-#define PYR_PANEL_HEIGHT 95
-
-/* Panel interface */
-struct panel_info {
- u32 width_mm;
- u32 height_mm;
-};
-
-struct mdfld_dsi_dbi_output;
-
-struct mdfld_dsi_connector_state {
- u32 mipi_ctrl_reg;
-};
-
-struct mdfld_dsi_encoder_state {
-
-};
-
-struct mdfld_dsi_connector {
- /*
- * This is ugly, but I have to use connector in it! :-(
- * FIXME: use drm_connector instead.
- */
- struct psb_intel_output base;
-
- int pipe;
- void *private;
- void *pkg_sender;
-
- /* Connection status */
- enum drm_connector_status status;
-};
-
-struct mdfld_dsi_encoder {
- struct drm_encoder base;
- void *private;
-};
-
-/*
- * DSI config, consists of one DSI connector, two DSI encoders.
- * DRM will pick up on DSI encoder basing on differents configs.
- */
-struct mdfld_dsi_config {
- struct drm_device *dev;
- struct drm_display_mode *fixed_mode;
- struct drm_display_mode *mode;
-
- struct mdfld_dsi_connector *connector;
- struct mdfld_dsi_encoder *encoders[DRM_CONNECTOR_MAX_ENCODER];
- struct mdfld_dsi_encoder *encoder;
-
- int changed;
-
- int bpp;
- int type;
- int lane_count;
- /*Virtual channel number for this encoder*/
- int channel_num;
- /*video mode configure*/
- int video_mode;
-
- int dvr_ic_inited;
-};
-
-#define MDFLD_DSI_CONNECTOR(psb_output) \
- (container_of(psb_output, struct mdfld_dsi_connector, base))
-
-#define MDFLD_DSI_ENCODER(encoder) \
- (container_of(encoder, struct mdfld_dsi_encoder, base))
-
-struct panel_funcs {
- const struct drm_encoder_funcs *encoder_funcs;
- const struct drm_encoder_helper_funcs *encoder_helper_funcs;
- struct drm_display_mode *(*get_config_mode) (struct drm_device *);
- void (*update_fb) (struct mdfld_dsi_dbi_output *, int);
- int (*get_panel_info) (struct drm_device *, int, struct panel_info *);
- int (*reset)(int pipe);
- void (*drv_ic_init)(struct mdfld_dsi_config *dsi_config, int pipe);
-};
-
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-/* TODO
- * - Split functions by vbt type
- * - Make them all take drm_device
- * - Check ioremap failures
- */
-
-#include <linux/moduleparam.h>
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include "psb_drm.h"
-#include "psb_drv.h"
-#include "mid_bios.h"
-#include "mdfld_output.h"
-
-static int panel_id = GCT_DETECT;
-module_param_named(panel_id, panel_id, int, 0600);
-MODULE_PARM_DESC(panel_id, "Panel Identifier");
-
-
-static void mid_get_fuse_settings(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
- uint32_t fuse_value = 0;
- uint32_t fuse_value_tmp = 0;
-
-#define FB_REG06 0xD0810600
-#define FB_MIPI_DISABLE (1 << 11)
-#define FB_REG09 0xD0810900
-#define FB_REG09 0xD0810900
-#define FB_SKU_MASK 0x7000
-#define FB_SKU_SHIFT 12
-#define FB_SKU_100 0
-#define FB_SKU_100L 1
-#define FB_SKU_83 2
- pci_write_config_dword(pci_root, 0xD0, FB_REG06);
- pci_read_config_dword(pci_root, 0xD4, &fuse_value);
-
- /* FB_MIPI_DISABLE doesn't mean LVDS on with Medfield */
- if (IS_MRST(dev))
- dev_priv->iLVDS_enable = fuse_value & FB_MIPI_DISABLE;
-
- DRM_INFO("internal display is %s\n",
- dev_priv->iLVDS_enable ? "LVDS display" : "MIPI display");
-
- /* Prevent runtime suspend at start*/
- if (dev_priv->iLVDS_enable) {
- dev_priv->is_lvds_on = true;
- dev_priv->is_mipi_on = false;
- } else {
- dev_priv->is_mipi_on = true;
- dev_priv->is_lvds_on = false;
- }
-
- dev_priv->video_device_fuse = fuse_value;
-
- pci_write_config_dword(pci_root, 0xD0, FB_REG09);
- pci_read_config_dword(pci_root, 0xD4, &fuse_value);
-
- dev_dbg(dev->dev, "SKU values is 0x%x.\n", fuse_value);
- fuse_value_tmp = (fuse_value & FB_SKU_MASK) >> FB_SKU_SHIFT;
-
- dev_priv->fuse_reg_value = fuse_value;
-
- switch (fuse_value_tmp) {
- case FB_SKU_100:
- dev_priv->core_freq = 200;
- break;
- case FB_SKU_100L:
- dev_priv->core_freq = 100;
- break;
- case FB_SKU_83:
- dev_priv->core_freq = 166;
- break;
- default:
- dev_warn(dev->dev, "Invalid SKU values, SKU value = 0x%08x\n",
- fuse_value_tmp);
- dev_priv->core_freq = 0;
- }
- dev_dbg(dev->dev, "LNC core clk is %dMHz.\n", dev_priv->core_freq);
- pci_dev_put(pci_root);
-}
-
-/*
- * Get the revison ID, B0:D2:F0;0x08
- */
-static void mid_get_pci_revID(struct drm_psb_private *dev_priv)
-{
- uint32_t platform_rev_id = 0;
- struct pci_dev *pci_gfx_root = pci_get_bus_and_slot(0, PCI_DEVFN(2, 0));
-
- pci_read_config_dword(pci_gfx_root, 0x08, &platform_rev_id);
- dev_priv->platform_rev_id = (uint8_t) platform_rev_id;
- pci_dev_put(pci_gfx_root);
- dev_dbg(dev_priv->dev->dev, "platform_rev_id is %x\n",
- dev_priv->platform_rev_id);
-}
-
-static void mid_get_vbt_data(struct drm_psb_private *dev_priv)
-{
- struct drm_device *dev = dev_priv->dev;
- struct mrst_vbt *vbt = &dev_priv->vbt_data;
- u32 addr;
- u16 new_size;
- u8 *vbt_virtual;
- u8 bpi;
- u8 number_desc = 0;
- struct mrst_timing_info *dp_ti = &dev_priv->gct_data.DTD;
- struct gct_r10_timing_info ti;
- void *pGCT;
- struct pci_dev *pci_gfx_root = pci_get_bus_and_slot(0, PCI_DEVFN(2, 0));
-
- /* Get the address of the platform config vbt, B0:D2:F0;0xFC */
- pci_read_config_dword(pci_gfx_root, 0xFC, &addr);
- pci_dev_put(pci_gfx_root);
-
- dev_dbg(dev->dev, "drm platform config address is %x\n", addr);
-
- /* check for platform config address == 0. */
- /* this means fw doesn't support vbt */
-
- if (addr == 0) {
- vbt->size = 0;
- return;
- }
-
- /* get the virtual address of the vbt */
- vbt_virtual = ioremap(addr, sizeof(*vbt));
-
- memcpy(vbt, vbt_virtual, sizeof(*vbt));
- iounmap(vbt_virtual); /* Free virtual address space */
-
- dev_dbg(dev->dev, "GCT revision is %x\n", vbt->revision);
-
- switch (vbt->revision) {
- case 0:
- vbt->mrst_gct = ioremap(addr + sizeof(*vbt) - 4,
- vbt->size - sizeof(*vbt) + 4);
- pGCT = vbt->mrst_gct;
- bpi = ((struct mrst_gct_v1 *)pGCT)->PD.BootPanelIndex;
- dev_priv->gct_data.bpi = bpi;
- dev_priv->gct_data.pt =
- ((struct mrst_gct_v1 *)pGCT)->PD.PanelType;
- memcpy(&dev_priv->gct_data.DTD,
- &((struct mrst_gct_v1 *)pGCT)->panel[bpi].DTD,
- sizeof(struct mrst_timing_info));
- dev_priv->gct_data.Panel_Port_Control =
- ((struct mrst_gct_v1 *)pGCT)->panel[bpi].Panel_Port_Control;
- dev_priv->gct_data.Panel_MIPI_Display_Descriptor =
- ((struct mrst_gct_v1 *)pGCT)->panel[bpi].Panel_MIPI_Display_Descriptor;
- break;
- case 1:
- vbt->mrst_gct = ioremap(addr + sizeof(*vbt) - 4,
- vbt->size - sizeof(*vbt) + 4);
- pGCT = vbt->mrst_gct;
- bpi = ((struct mrst_gct_v2 *)pGCT)->PD.BootPanelIndex;
- dev_priv->gct_data.bpi = bpi;
- dev_priv->gct_data.pt =
- ((struct mrst_gct_v2 *)pGCT)->PD.PanelType;
- memcpy(&dev_priv->gct_data.DTD,
- &((struct mrst_gct_v2 *)pGCT)->panel[bpi].DTD,
- sizeof(struct mrst_timing_info));
- dev_priv->gct_data.Panel_Port_Control =
- ((struct mrst_gct_v2 *)pGCT)->panel[bpi].Panel_Port_Control;
- dev_priv->gct_data.Panel_MIPI_Display_Descriptor =
- ((struct mrst_gct_v2 *)pGCT)->panel[bpi].Panel_MIPI_Display_Descriptor;
- break;
- case 0x10:
- /*header definition changed from rev 01 (v2) to rev 10h. */
- /*so, some values have changed location*/
- new_size = vbt->checksum; /*checksum contains lo size byte*/
- /*LSB of mrst_gct contains hi size byte*/
- new_size |= ((0xff & (unsigned int)vbt->mrst_gct)) << 8;
-
- vbt->checksum = vbt->size; /*size contains the checksum*/
- if (new_size > 0xff)
- vbt->size = 0xff; /*restrict size to 255*/
- else
- vbt->size = new_size;
-
- /* number of descriptors defined in the GCT */
- number_desc = ((0xff00 & (unsigned int)vbt->mrst_gct)) >> 8;
- bpi = ((0xff0000 & (unsigned int)vbt->mrst_gct)) >> 16;
- vbt->mrst_gct = ioremap(addr + GCT_R10_HEADER_SIZE,
- GCT_R10_DISPLAY_DESC_SIZE * number_desc);
- pGCT = vbt->mrst_gct;
- pGCT = (u8 *)pGCT + (bpi*GCT_R10_DISPLAY_DESC_SIZE);
- dev_priv->gct_data.bpi = bpi; /*save boot panel id*/
-
- /*copy the GCT display timings into a temp structure*/
- memcpy(&ti, pGCT, sizeof(struct gct_r10_timing_info));
-
- /*now copy the temp struct into the dev_priv->gct_data*/
- dp_ti->pixel_clock = ti.pixel_clock;
- dp_ti->hactive_hi = ti.hactive_hi;
- dp_ti->hactive_lo = ti.hactive_lo;
- dp_ti->hblank_hi = ti.hblank_hi;
- dp_ti->hblank_lo = ti.hblank_lo;
- dp_ti->hsync_offset_hi = ti.hsync_offset_hi;
- dp_ti->hsync_offset_lo = ti.hsync_offset_lo;
- dp_ti->hsync_pulse_width_hi = ti.hsync_pulse_width_hi;
- dp_ti->hsync_pulse_width_lo = ti.hsync_pulse_width_lo;
- dp_ti->vactive_hi = ti.vactive_hi;
- dp_ti->vactive_lo = ti.vactive_lo;
- dp_ti->vblank_hi = ti.vblank_hi;
- dp_ti->vblank_lo = ti.vblank_lo;
- dp_ti->vsync_offset_hi = ti.vsync_offset_hi;
- dp_ti->vsync_offset_lo = ti.vsync_offset_lo;
- dp_ti->vsync_pulse_width_hi = ti.vsync_pulse_width_hi;
- dp_ti->vsync_pulse_width_lo = ti.vsync_pulse_width_lo;
-
- /* Move the MIPI_Display_Descriptor data from GCT to dev priv */
- dev_priv->gct_data.Panel_MIPI_Display_Descriptor =
- *((u8 *)pGCT + 0x0d);
- dev_priv->gct_data.Panel_MIPI_Display_Descriptor |=
- (*((u8 *)pGCT + 0x0e)) << 8;
- break;
- default:
- dev_err(dev->dev, "Unknown revision of GCT!\n");
- vbt->size = 0;
- }
- if (IS_MFLD(dev_priv->dev)) {
- if (panel_id == GCT_DETECT) {
- if (dev_priv->gct_data.bpi == 2) {
- dev_info(dev->dev, "[GFX] PYR Panel Detected\n");
- dev_priv->panel_id = PYR_CMD;
- panel_id = PYR_CMD;
- } else if (dev_priv->gct_data.bpi == 0) {
- dev_info(dev->dev, "[GFX] TMD Panel Detected.\n");
- dev_priv->panel_id = TMD_VID;
- panel_id = TMD_VID;
- } else {
- dev_info(dev->dev, "[GFX] Default Panel (TPO)\n");
- dev_priv->panel_id = TPO_CMD;
- panel_id = TPO_CMD;
- }
- } else {
- dev_info(dev->dev, "[GFX] Panel Parameter Passed in through cmd line\n");
- dev_priv->panel_id = panel_id;
- }
- }
-}
-
-int mid_chip_setup(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- mid_get_fuse_settings(dev);
- mid_get_vbt_data(dev_priv);
- mid_get_pci_revID(dev_priv);
- return 0;
-}
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-extern int mid_chip_setup(struct drm_device *dev);
-
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2007, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-#include <drm/drmP.h>
-#include "psb_drv.h"
-#include "psb_reg.h"
-
-/*
- * Code for the SGX MMU:
- */
-
-/*
- * clflush on one processor only:
- * clflush should apparently flush the cache line on all processors in an
- * SMP system.
- */
-
-/*
- * kmap atomic:
- * The usage of the slots must be completely encapsulated within a spinlock, and
- * no other functions that may be using the locks for other purposed may be
- * called from within the locked region.
- * Since the slots are per processor, this will guarantee that we are the only
- * user.
- */
-
-/*
- * TODO: Inserting ptes from an interrupt handler:
- * This may be desirable for some SGX functionality where the GPU can fault in
- * needed pages. For that, we need to make an atomic insert_pages function, that
- * may fail.
- * If it fails, the caller need to insert the page using a workqueue function,
- * but on average it should be fast.
- */
-
-struct psb_mmu_driver {
- /* protects driver- and pd structures. Always take in read mode
- * before taking the page table spinlock.
- */
- struct rw_semaphore sem;
-
- /* protects page tables, directory tables and pt tables.
- * and pt structures.
- */
- spinlock_t lock;
-
- atomic_t needs_tlbflush;
-
- uint8_t __iomem *register_map;
- struct psb_mmu_pd *default_pd;
- /*uint32_t bif_ctrl;*/
- int has_clflush;
- int clflush_add;
- unsigned long clflush_mask;
-
- struct drm_psb_private *dev_priv;
-};
-
-struct psb_mmu_pd;
-
-struct psb_mmu_pt {
- struct psb_mmu_pd *pd;
- uint32_t index;
- uint32_t count;
- struct page *p;
- uint32_t *v;
-};
-
-struct psb_mmu_pd {
- struct psb_mmu_driver *driver;
- int hw_context;
- struct psb_mmu_pt **tables;
- struct page *p;
- struct page *dummy_pt;
- struct page *dummy_page;
- uint32_t pd_mask;
- uint32_t invalid_pde;
- uint32_t invalid_pte;
-};
-
-static inline uint32_t psb_mmu_pt_index(uint32_t offset)
-{
- return (offset >> PSB_PTE_SHIFT) & 0x3FF;
-}
-
-static inline uint32_t psb_mmu_pd_index(uint32_t offset)
-{
- return offset >> PSB_PDE_SHIFT;
-}
-
-static inline void psb_clflush(void *addr)
-{
- __asm__ __volatile__("clflush (%0)\n" : : "r"(addr) : "memory");
-}
-
-static inline void psb_mmu_clflush(struct psb_mmu_driver *driver,
- void *addr)
-{
- if (!driver->has_clflush)
- return;
-
- mb();
- psb_clflush(addr);
- mb();
-}
-
-static void psb_page_clflush(struct psb_mmu_driver *driver, struct page* page)
-{
- uint32_t clflush_add = driver->clflush_add >> PAGE_SHIFT;
- uint32_t clflush_count = PAGE_SIZE / clflush_add;
- int i;
- uint8_t *clf;
-
- clf = kmap_atomic(page, KM_USER0);
- mb();
- for (i = 0; i < clflush_count; ++i) {
- psb_clflush(clf);
- clf += clflush_add;
- }
- mb();
- kunmap_atomic(clf, KM_USER0);
-}
-
-static void psb_pages_clflush(struct psb_mmu_driver *driver,
- struct page *page[], unsigned long num_pages)
-{
- int i;
-
- if (!driver->has_clflush)
- return ;
-
- for (i = 0; i < num_pages; i++)
- psb_page_clflush(driver, *page++);
-}
-
-static void psb_mmu_flush_pd_locked(struct psb_mmu_driver *driver,
- int force)
-{
- atomic_set(&driver->needs_tlbflush, 0);
-}
-
-static void psb_mmu_flush_pd(struct psb_mmu_driver *driver, int force)
-{
- down_write(&driver->sem);
- psb_mmu_flush_pd_locked(driver, force);
- up_write(&driver->sem);
-}
-
-void psb_mmu_flush(struct psb_mmu_driver *driver, int rc_prot)
-{
- if (rc_prot)
- down_write(&driver->sem);
- if (rc_prot)
- up_write(&driver->sem);
-}
-
-void psb_mmu_set_pd_context(struct psb_mmu_pd *pd, int hw_context)
-{
- /*ttm_tt_cache_flush(&pd->p, 1);*/
- psb_pages_clflush(pd->driver, &pd->p, 1);
- down_write(&pd->driver->sem);
- wmb();
- psb_mmu_flush_pd_locked(pd->driver, 1);
- pd->hw_context = hw_context;
- up_write(&pd->driver->sem);
-
-}
-
-static inline unsigned long psb_pd_addr_end(unsigned long addr,
- unsigned long end)
-{
-
- addr = (addr + PSB_PDE_MASK + 1) & ~PSB_PDE_MASK;
- return (addr < end) ? addr : end;
-}
-
-static inline uint32_t psb_mmu_mask_pte(uint32_t pfn, int type)
-{
- uint32_t mask = PSB_PTE_VALID;
-
- if (type & PSB_MMU_CACHED_MEMORY)
- mask |= PSB_PTE_CACHED;
- if (type & PSB_MMU_RO_MEMORY)
- mask |= PSB_PTE_RO;
- if (type & PSB_MMU_WO_MEMORY)
- mask |= PSB_PTE_WO;
-
- return (pfn << PAGE_SHIFT) | mask;
-}
-
-struct psb_mmu_pd *psb_mmu_alloc_pd(struct psb_mmu_driver *driver,
- int trap_pagefaults, int invalid_type)
-{
- struct psb_mmu_pd *pd = kmalloc(sizeof(*pd), GFP_KERNEL);
- uint32_t *v;
- int i;
-
- if (!pd)
- return NULL;
-
- pd->p = alloc_page(GFP_DMA32);
- if (!pd->p)
- goto out_err1;
- pd->dummy_pt = alloc_page(GFP_DMA32);
- if (!pd->dummy_pt)
- goto out_err2;
- pd->dummy_page = alloc_page(GFP_DMA32);
- if (!pd->dummy_page)
- goto out_err3;
-
- if (!trap_pagefaults) {
- pd->invalid_pde =
- psb_mmu_mask_pte(page_to_pfn(pd->dummy_pt),
- invalid_type);
- pd->invalid_pte =
- psb_mmu_mask_pte(page_to_pfn(pd->dummy_page),
- invalid_type);
- } else {
- pd->invalid_pde = 0;
- pd->invalid_pte = 0;
- }
-
- v = kmap(pd->dummy_pt);
- for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i)
- v[i] = pd->invalid_pte;
-
- kunmap(pd->dummy_pt);
-
- v = kmap(pd->p);
- for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i)
- v[i] = pd->invalid_pde;
-
- kunmap(pd->p);
-
- clear_page(kmap(pd->dummy_page));
- kunmap(pd->dummy_page);
-
- pd->tables = vmalloc_user(sizeof(struct psb_mmu_pt *) * 1024);
- if (!pd->tables)
- goto out_err4;
-
- pd->hw_context = -1;
- pd->pd_mask = PSB_PTE_VALID;
- pd->driver = driver;
-
- return pd;
-
-out_err4:
- __free_page(pd->dummy_page);
-out_err3:
- __free_page(pd->dummy_pt);
-out_err2:
- __free_page(pd->p);
-out_err1:
- kfree(pd);
- return NULL;
-}
-
-void psb_mmu_free_pt(struct psb_mmu_pt *pt)
-{
- __free_page(pt->p);
- kfree(pt);
-}
-
-void psb_mmu_free_pagedir(struct psb_mmu_pd *pd)
-{
- struct psb_mmu_driver *driver = pd->driver;
- struct psb_mmu_pt *pt;
- int i;
-
- down_write(&driver->sem);
- if (pd->hw_context != -1)
- psb_mmu_flush_pd_locked(driver, 1);
-
- /* Should take the spinlock here, but we don't need to do that
- since we have the semaphore in write mode. */
-
- for (i = 0; i < 1024; ++i) {
- pt = pd->tables[i];
- if (pt)
- psb_mmu_free_pt(pt);
- }
-
- vfree(pd->tables);
- __free_page(pd->dummy_page);
- __free_page(pd->dummy_pt);
- __free_page(pd->p);
- kfree(pd);
- up_write(&driver->sem);
-}
-
-static struct psb_mmu_pt *psb_mmu_alloc_pt(struct psb_mmu_pd *pd)
-{
- struct psb_mmu_pt *pt = kmalloc(sizeof(*pt), GFP_KERNEL);
- void *v;
- uint32_t clflush_add = pd->driver->clflush_add >> PAGE_SHIFT;
- uint32_t clflush_count = PAGE_SIZE / clflush_add;
- spinlock_t *lock = &pd->driver->lock;
- uint8_t *clf;
- uint32_t *ptes;
- int i;
-
- if (!pt)
- return NULL;
-
- pt->p = alloc_page(GFP_DMA32);
- if (!pt->p) {
- kfree(pt);
- return NULL;
- }
-
- spin_lock(lock);
-
- v = kmap_atomic(pt->p, KM_USER0);
- clf = (uint8_t *) v;
- ptes = (uint32_t *) v;
- for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i)
- *ptes++ = pd->invalid_pte;
-
-
- if (pd->driver->has_clflush && pd->hw_context != -1) {
- mb();
- for (i = 0; i < clflush_count; ++i) {
- psb_clflush(clf);
- clf += clflush_add;
- }
- mb();
- }
-
- kunmap_atomic(v, KM_USER0);
- spin_unlock(lock);
-
- pt->count = 0;
- pt->pd = pd;
- pt->index = 0;
-
- return pt;
-}
-
-struct psb_mmu_pt *psb_mmu_pt_alloc_map_lock(struct psb_mmu_pd *pd,
- unsigned long addr)
-{
- uint32_t index = psb_mmu_pd_index(addr);
- struct psb_mmu_pt *pt;
- uint32_t *v;
- spinlock_t *lock = &pd->driver->lock;
-
- spin_lock(lock);
- pt = pd->tables[index];
- while (!pt) {
- spin_unlock(lock);
- pt = psb_mmu_alloc_pt(pd);
- if (!pt)
- return NULL;
- spin_lock(lock);
-
- if (pd->tables[index]) {
- spin_unlock(lock);
- psb_mmu_free_pt(pt);
- spin_lock(lock);
- pt = pd->tables[index];
- continue;
- }
-
- v = kmap_atomic(pd->p, KM_USER0);
- pd->tables[index] = pt;
- v[index] = (page_to_pfn(pt->p) << 12) | pd->pd_mask;
- pt->index = index;
- kunmap_atomic((void *) v, KM_USER0);
-
- if (pd->hw_context != -1) {
- psb_mmu_clflush(pd->driver, (void *) &v[index]);
- atomic_set(&pd->driver->needs_tlbflush, 1);
- }
- }
- pt->v = kmap_atomic(pt->p, KM_USER0);
- return pt;
-}
-
-static struct psb_mmu_pt *psb_mmu_pt_map_lock(struct psb_mmu_pd *pd,
- unsigned long addr)
-{
- uint32_t index = psb_mmu_pd_index(addr);
- struct psb_mmu_pt *pt;
- spinlock_t *lock = &pd->driver->lock;
-
- spin_lock(lock);
- pt = pd->tables[index];
- if (!pt) {
- spin_unlock(lock);
- return NULL;
- }
- pt->v = kmap_atomic(pt->p, KM_USER0);
- return pt;
-}
-
-static void psb_mmu_pt_unmap_unlock(struct psb_mmu_pt *pt)
-{
- struct psb_mmu_pd *pd = pt->pd;
- uint32_t *v;
-
- kunmap_atomic(pt->v, KM_USER0);
- if (pt->count == 0) {
- v = kmap_atomic(pd->p, KM_USER0);
- v[pt->index] = pd->invalid_pde;
- pd->tables[pt->index] = NULL;
-
- if (pd->hw_context != -1) {
- psb_mmu_clflush(pd->driver,
- (void *) &v[pt->index]);
- atomic_set(&pd->driver->needs_tlbflush, 1);
- }
- kunmap_atomic(pt->v, KM_USER0);
- spin_unlock(&pd->driver->lock);
- psb_mmu_free_pt(pt);
- return;
- }
- spin_unlock(&pd->driver->lock);
-}
-
-static inline void psb_mmu_set_pte(struct psb_mmu_pt *pt,
- unsigned long addr, uint32_t pte)
-{
- pt->v[psb_mmu_pt_index(addr)] = pte;
-}
-
-static inline void psb_mmu_invalidate_pte(struct psb_mmu_pt *pt,
- unsigned long addr)
-{
- pt->v[psb_mmu_pt_index(addr)] = pt->pd->invalid_pte;
-}
-
-
-void psb_mmu_mirror_gtt(struct psb_mmu_pd *pd,
- uint32_t mmu_offset, uint32_t gtt_start,
- uint32_t gtt_pages)
-{
- uint32_t *v;
- uint32_t start = psb_mmu_pd_index(mmu_offset);
- struct psb_mmu_driver *driver = pd->driver;
- int num_pages = gtt_pages;
-
- down_read(&driver->sem);
- spin_lock(&driver->lock);
-
- v = kmap_atomic(pd->p, KM_USER0);
- v += start;
-
- while (gtt_pages--) {
- *v++ = gtt_start | pd->pd_mask;
- gtt_start += PAGE_SIZE;
- }
-
- /*ttm_tt_cache_flush(&pd->p, num_pages);*/
- psb_pages_clflush(pd->driver, &pd->p, num_pages);
- kunmap_atomic(v, KM_USER0);
- spin_unlock(&driver->lock);
-
- if (pd->hw_context != -1)
- atomic_set(&pd->driver->needs_tlbflush, 1);
-
- up_read(&pd->driver->sem);
- psb_mmu_flush_pd(pd->driver, 0);
-}
-
-struct psb_mmu_pd *psb_mmu_get_default_pd(struct psb_mmu_driver *driver)
-{
- struct psb_mmu_pd *pd;
-
- /* down_read(&driver->sem); */
- pd = driver->default_pd;
- /* up_read(&driver->sem); */
-
- return pd;
-}
-
-/* Returns the physical address of the PD shared by sgx/msvdx */
-uint32_t psb_get_default_pd_addr(struct psb_mmu_driver *driver)
-{
- struct psb_mmu_pd *pd;
-
- pd = psb_mmu_get_default_pd(driver);
- return page_to_pfn(pd->p) << PAGE_SHIFT;
-}
-
-void psb_mmu_driver_takedown(struct psb_mmu_driver *driver)
-{
- psb_mmu_free_pagedir(driver->default_pd);
- kfree(driver);
-}
-
-struct psb_mmu_driver *psb_mmu_driver_init(uint8_t __iomem * registers,
- int trap_pagefaults,
- int invalid_type,
- struct drm_psb_private *dev_priv)
-{
- struct psb_mmu_driver *driver;
-
- driver = kmalloc(sizeof(*driver), GFP_KERNEL);
-
- if (!driver)
- return NULL;
- driver->dev_priv = dev_priv;
-
- driver->default_pd = psb_mmu_alloc_pd(driver, trap_pagefaults,
- invalid_type);
- if (!driver->default_pd)
- goto out_err1;
-
- spin_lock_init(&driver->lock);
- init_rwsem(&driver->sem);
- down_write(&driver->sem);
- driver->register_map = registers;
- atomic_set(&driver->needs_tlbflush, 1);
-
- driver->has_clflush = 0;
-
- if (boot_cpu_has(X86_FEATURE_CLFLSH)) {
- uint32_t tfms, misc, cap0, cap4, clflush_size;
-
- /*
- * clflush size is determined at kernel setup for x86_64
- * but not for i386. We have to do it here.
- */
-
- cpuid(0x00000001, &tfms, &misc, &cap0, &cap4);
- clflush_size = ((misc >> 8) & 0xff) * 8;
- driver->has_clflush = 1;
- driver->clflush_add =
- PAGE_SIZE * clflush_size / sizeof(uint32_t);
- driver->clflush_mask = driver->clflush_add - 1;
- driver->clflush_mask = ~driver->clflush_mask;
- }
-
- up_write(&driver->sem);
- return driver;
-
-out_err1:
- kfree(driver);
- return NULL;
-}
-
-static void psb_mmu_flush_ptes(struct psb_mmu_pd *pd,
- unsigned long address, uint32_t num_pages,
- uint32_t desired_tile_stride,
- uint32_t hw_tile_stride)
-{
- struct psb_mmu_pt *pt;
- uint32_t rows = 1;
- uint32_t i;
- unsigned long addr;
- unsigned long end;
- unsigned long next;
- unsigned long add;
- unsigned long row_add;
- unsigned long clflush_add = pd->driver->clflush_add;
- unsigned long clflush_mask = pd->driver->clflush_mask;
-
- if (!pd->driver->has_clflush) {
- /*ttm_tt_cache_flush(&pd->p, num_pages);*/
- psb_pages_clflush(pd->driver, &pd->p, num_pages);
- return;
- }
-
- if (hw_tile_stride)
- rows = num_pages / desired_tile_stride;
- else
- desired_tile_stride = num_pages;
-
- add = desired_tile_stride << PAGE_SHIFT;
- row_add = hw_tile_stride << PAGE_SHIFT;
- mb();
- for (i = 0; i < rows; ++i) {
-
- addr = address;
- end = addr + add;
-
- do {
- next = psb_pd_addr_end(addr, end);
- pt = psb_mmu_pt_map_lock(pd, addr);
- if (!pt)
- continue;
- do {
- psb_clflush(&pt->v
- [psb_mmu_pt_index(addr)]);
- } while (addr +=
- clflush_add,
- (addr & clflush_mask) < next);
-
- psb_mmu_pt_unmap_unlock(pt);
- } while (addr = next, next != end);
- address += row_add;
- }
- mb();
-}
-
-void psb_mmu_remove_pfn_sequence(struct psb_mmu_pd *pd,
- unsigned long address, uint32_t num_pages)
-{
- struct psb_mmu_pt *pt;
- unsigned long addr;
- unsigned long end;
- unsigned long next;
- unsigned long f_address = address;
-
- down_read(&pd->driver->sem);
-
- addr = address;
- end = addr + (num_pages << PAGE_SHIFT);
-
- do {
- next = psb_pd_addr_end(addr, end);
- pt = psb_mmu_pt_alloc_map_lock(pd, addr);
- if (!pt)
- goto out;
- do {
- psb_mmu_invalidate_pte(pt, addr);
- --pt->count;
- } while (addr += PAGE_SIZE, addr < next);
- psb_mmu_pt_unmap_unlock(pt);
-
- } while (addr = next, next != end);
-
-out:
- if (pd->hw_context != -1)
- psb_mmu_flush_ptes(pd, f_address, num_pages, 1, 1);
-
- up_read(&pd->driver->sem);
-
- if (pd->hw_context != -1)
- psb_mmu_flush(pd->driver, 0);
-
- return;
-}
-
-void psb_mmu_remove_pages(struct psb_mmu_pd *pd, unsigned long address,
- uint32_t num_pages, uint32_t desired_tile_stride,
- uint32_t hw_tile_stride)
-{
- struct psb_mmu_pt *pt;
- uint32_t rows = 1;
- uint32_t i;
- unsigned long addr;
- unsigned long end;
- unsigned long next;
- unsigned long add;
- unsigned long row_add;
- unsigned long f_address = address;
-
- if (hw_tile_stride)
- rows = num_pages / desired_tile_stride;
- else
- desired_tile_stride = num_pages;
-
- add = desired_tile_stride << PAGE_SHIFT;
- row_add = hw_tile_stride << PAGE_SHIFT;
-
- /* down_read(&pd->driver->sem); */
-
- /* Make sure we only need to flush this processor's cache */
-
- for (i = 0; i < rows; ++i) {
-
- addr = address;
- end = addr + add;
-
- do {
- next = psb_pd_addr_end(addr, end);
- pt = psb_mmu_pt_map_lock(pd, addr);
- if (!pt)
- continue;
- do {
- psb_mmu_invalidate_pte(pt, addr);
- --pt->count;
-
- } while (addr += PAGE_SIZE, addr < next);
- psb_mmu_pt_unmap_unlock(pt);
-
- } while (addr = next, next != end);
- address += row_add;
- }
- if (pd->hw_context != -1)
- psb_mmu_flush_ptes(pd, f_address, num_pages,
- desired_tile_stride, hw_tile_stride);
-
- /* up_read(&pd->driver->sem); */
-
- if (pd->hw_context != -1)
- psb_mmu_flush(pd->driver, 0);
-}
-
-int psb_mmu_insert_pfn_sequence(struct psb_mmu_pd *pd, uint32_t start_pfn,
- unsigned long address, uint32_t num_pages,
- int type)
-{
- struct psb_mmu_pt *pt;
- uint32_t pte;
- unsigned long addr;
- unsigned long end;
- unsigned long next;
- unsigned long f_address = address;
- int ret = 0;
-
- down_read(&pd->driver->sem);
-
- addr = address;
- end = addr + (num_pages << PAGE_SHIFT);
-
- do {
- next = psb_pd_addr_end(addr, end);
- pt = psb_mmu_pt_alloc_map_lock(pd, addr);
- if (!pt) {
- ret = -ENOMEM;
- goto out;
- }
- do {
- pte = psb_mmu_mask_pte(start_pfn++, type);
- psb_mmu_set_pte(pt, addr, pte);
- pt->count++;
- } while (addr += PAGE_SIZE, addr < next);
- psb_mmu_pt_unmap_unlock(pt);
-
- } while (addr = next, next != end);
-
-out:
- if (pd->hw_context != -1)
- psb_mmu_flush_ptes(pd, f_address, num_pages, 1, 1);
-
- up_read(&pd->driver->sem);
-
- if (pd->hw_context != -1)
- psb_mmu_flush(pd->driver, 1);
-
- return ret;
-}
-
-int psb_mmu_insert_pages(struct psb_mmu_pd *pd, struct page **pages,
- unsigned long address, uint32_t num_pages,
- uint32_t desired_tile_stride,
- uint32_t hw_tile_stride, int type)
-{
- struct psb_mmu_pt *pt;
- uint32_t rows = 1;
- uint32_t i;
- uint32_t pte;
- unsigned long addr;
- unsigned long end;
- unsigned long next;
- unsigned long add;
- unsigned long row_add;
- unsigned long f_address = address;
- int ret = 0;
-
- if (hw_tile_stride) {
- if (num_pages % desired_tile_stride != 0)
- return -EINVAL;
- rows = num_pages / desired_tile_stride;
- } else {
- desired_tile_stride = num_pages;
- }
-
- add = desired_tile_stride << PAGE_SHIFT;
- row_add = hw_tile_stride << PAGE_SHIFT;
-
- down_read(&pd->driver->sem);
-
- for (i = 0; i < rows; ++i) {
-
- addr = address;
- end = addr + add;
-
- do {
- next = psb_pd_addr_end(addr, end);
- pt = psb_mmu_pt_alloc_map_lock(pd, addr);
- if (!pt) {
- ret = -ENOMEM;
- goto out;
- }
- do {
- pte =
- psb_mmu_mask_pte(page_to_pfn(*pages++),
- type);
- psb_mmu_set_pte(pt, addr, pte);
- pt->count++;
- } while (addr += PAGE_SIZE, addr < next);
- psb_mmu_pt_unmap_unlock(pt);
-
- } while (addr = next, next != end);
-
- address += row_add;
- }
-out:
- if (pd->hw_context != -1)
- psb_mmu_flush_ptes(pd, f_address, num_pages,
- desired_tile_stride, hw_tile_stride);
-
- up_read(&pd->driver->sem);
-
- if (pd->hw_context != -1)
- psb_mmu_flush(pd->driver, 1);
-
- return ret;
-}
-
-int psb_mmu_virtual_to_pfn(struct psb_mmu_pd *pd, uint32_t virtual,
- unsigned long *pfn)
-{
- int ret;
- struct psb_mmu_pt *pt;
- uint32_t tmp;
- spinlock_t *lock = &pd->driver->lock;
-
- down_read(&pd->driver->sem);
- pt = psb_mmu_pt_map_lock(pd, virtual);
- if (!pt) {
- uint32_t *v;
-
- spin_lock(lock);
- v = kmap_atomic(pd->p, KM_USER0);
- tmp = v[psb_mmu_pd_index(virtual)];
- kunmap_atomic(v, KM_USER0);
- spin_unlock(lock);
-
- if (tmp != pd->invalid_pde || !(tmp & PSB_PTE_VALID) ||
- !(pd->invalid_pte & PSB_PTE_VALID)) {
- ret = -EINVAL;
- goto out;
- }
- ret = 0;
- *pfn = pd->invalid_pte >> PAGE_SHIFT;
- goto out;
- }
- tmp = pt->v[psb_mmu_pt_index(virtual)];
- if (!(tmp & PSB_PTE_VALID)) {
- ret = -EINVAL;
- } else {
- ret = 0;
- *pfn = tmp >> PAGE_SHIFT;
- }
- psb_mmu_pt_unmap_unlock(pt);
-out:
- up_read(&pd->driver->sem);
- return ret;
-}
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2007-2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-/* MID device specific descriptors */
-
-struct mrst_vbt {
- s8 signature[4]; /*4 bytes,"$GCT" */
- u8 revision;
- u8 size;
- u8 checksum;
- void *mrst_gct;
-} __packed;
-
-struct mrst_timing_info {
- u16 pixel_clock;
- u8 hactive_lo;
- u8 hblank_lo;
- u8 hblank_hi:4;
- u8 hactive_hi:4;
- u8 vactive_lo;
- u8 vblank_lo;
- u8 vblank_hi:4;
- u8 vactive_hi:4;
- u8 hsync_offset_lo;
- u8 hsync_pulse_width_lo;
- u8 vsync_pulse_width_lo:4;
- u8 vsync_offset_lo:4;
- u8 vsync_pulse_width_hi:2;
- u8 vsync_offset_hi:2;
- u8 hsync_pulse_width_hi:2;
- u8 hsync_offset_hi:2;
- u8 width_mm_lo;
- u8 height_mm_lo;
- u8 height_mm_hi:4;
- u8 width_mm_hi:4;
- u8 hborder;
- u8 vborder;
- u8 unknown0:1;
- u8 hsync_positive:1;
- u8 vsync_positive:1;
- u8 separate_sync:2;
- u8 stereo:1;
- u8 unknown6:1;
- u8 interlaced:1;
-} __packed;
-
-struct gct_r10_timing_info {
- u16 pixel_clock;
- u32 hactive_lo:8;
- u32 hactive_hi:4;
- u32 hblank_lo:8;
- u32 hblank_hi:4;
- u32 hsync_offset_lo:8;
- u16 hsync_offset_hi:2;
- u16 hsync_pulse_width_lo:8;
- u16 hsync_pulse_width_hi:2;
- u16 hsync_positive:1;
- u16 rsvd_1:3;
- u8 vactive_lo:8;
- u16 vactive_hi:4;
- u16 vblank_lo:8;
- u16 vblank_hi:4;
- u16 vsync_offset_lo:4;
- u16 vsync_offset_hi:2;
- u16 vsync_pulse_width_lo:4;
- u16 vsync_pulse_width_hi:2;
- u16 vsync_positive:1;
- u16 rsvd_2:3;
-} __packed;
-
-struct mrst_panel_descriptor_v1 {
- u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */
- /* 0x61190 if MIPI */
- u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/
- u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/
- u32 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 dword */
- /* Register 0x61210 */
- struct mrst_timing_info DTD;/*18 bytes, Standard definition */
- u16 Panel_Backlight_Inverter_Descriptor;/* 16 bits, as follows */
- /* Bit 0, Frequency, 15 bits,0 - 32767Hz */
- /* Bit 15, Polarity, 1 bit, 0: Normal, 1: Inverted */
- u16 Panel_MIPI_Display_Descriptor;
- /*16 bits, Defined as follows: */
- /* if MIPI, 0x0000 if LVDS */
- /* Bit 0, Type, 2 bits, */
- /* 0: Type-1, */
- /* 1: Type-2, */
- /* 2: Type-3, */
- /* 3: Type-4 */
- /* Bit 2, Pixel Format, 4 bits */
- /* Bit0: 16bpp (not supported in LNC), */
- /* Bit1: 18bpp loosely packed, */
- /* Bit2: 18bpp packed, */
- /* Bit3: 24bpp */
- /* Bit 6, Reserved, 2 bits, 00b */
- /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */
- /* Bit 14, Reserved, 2 bits, 00b */
-} __packed;
-
-struct mrst_panel_descriptor_v2 {
- u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */
- /* 0x61190 if MIPI */
- u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/
- u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/
- u8 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 byte */
- /* Register 0x61210 */
- struct mrst_timing_info DTD;/*18 bytes, Standard definition */
- u16 Panel_Backlight_Inverter_Descriptor;/*16 bits, as follows*/
- /*Bit 0, Frequency, 16 bits, 0 - 32767Hz*/
- u8 Panel_Initial_Brightness;/* [7:0] 0 - 100% */
- /*Bit 7, Polarity, 1 bit,0: Normal, 1: Inverted*/
- u16 Panel_MIPI_Display_Descriptor;
- /*16 bits, Defined as follows: */
- /* if MIPI, 0x0000 if LVDS */
- /* Bit 0, Type, 2 bits, */
- /* 0: Type-1, */
- /* 1: Type-2, */
- /* 2: Type-3, */
- /* 3: Type-4 */
- /* Bit 2, Pixel Format, 4 bits */
- /* Bit0: 16bpp (not supported in LNC), */
- /* Bit1: 18bpp loosely packed, */
- /* Bit2: 18bpp packed, */
- /* Bit3: 24bpp */
- /* Bit 6, Reserved, 2 bits, 00b */
- /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */
- /* Bit 14, Reserved, 2 bits, 00b */
-} __packed;
-
-union mrst_panel_rx {
- struct {
- u16 NumberOfLanes:2; /*Num of Lanes, 2 bits,0 = 1 lane,*/
- /* 1 = 2 lanes, 2 = 3 lanes, 3 = 4 lanes. */
- u16 MaxLaneFreq:3; /* 0: 100MHz, 1: 200MHz, 2: 300MHz, */
- /*3: 400MHz, 4: 500MHz, 5: 600MHz, 6: 700MHz, 7: 800MHz.*/
- u16 SupportedVideoTransferMode:2; /*0: Non-burst only */
- /* 1: Burst and non-burst */
- /* 2/3: Reserved */
- u16 HSClkBehavior:1; /*0: Continuous, 1: Non-continuous*/
- u16 DuoDisplaySupport:1; /*1 bit,0: No, 1: Yes*/
- u16 ECC_ChecksumCapabilities:1;/*1 bit,0: No, 1: Yes*/
- u16 BidirectionalCommunication:1;/*1 bit,0: No, 1: Yes */
- u16 Rsvd:5;/*5 bits,00000b */
- } panelrx;
- u16 panel_receiver;
-} __packed;
-
-struct mrst_gct_v1 {
- union { /*8 bits,Defined as follows: */
- struct {
- u8 PanelType:4; /*4 bits, Bit field for panels*/
- /* 0 - 3: 0 = LVDS, 1 = MIPI*/
- /*2 bits,Specifies which of the*/
- u8 BootPanelIndex:2;
- /* 4 panels to use by default*/
- u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/
- /* the 4 MIPI DSI receivers to use*/
- } PD;
- u8 PanelDescriptor;
- };
- struct mrst_panel_descriptor_v1 panel[4];/*panel descrs,38 bytes each*/
- union mrst_panel_rx panelrx[4]; /* panel receivers*/
-} __packed;
-
-struct mrst_gct_v2 {
- union { /*8 bits,Defined as follows: */
- struct {
- u8 PanelType:4; /*4 bits, Bit field for panels*/
- /* 0 - 3: 0 = LVDS, 1 = MIPI*/
- /*2 bits,Specifies which of the*/
- u8 BootPanelIndex:2;
- /* 4 panels to use by default*/
- u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/
- /* the 4 MIPI DSI receivers to use*/
- } PD;
- u8 PanelDescriptor;
- };
- struct mrst_panel_descriptor_v2 panel[4];/*panel descrs,38 bytes each*/
- union mrst_panel_rx panelrx[4]; /* panel receivers*/
-} __packed;
-
-struct mrst_gct_data {
- u8 bpi; /* boot panel index, number of panel used during boot */
- u8 pt; /* panel type, 4 bit field, 0=lvds, 1=mipi */
- struct mrst_timing_info DTD; /* timing info for the selected panel */
- u32 Panel_Port_Control;
- u32 PP_On_Sequencing;/*1 dword,Register 0x61208,*/
- u32 PP_Off_Sequencing;/*1 dword,Register 0x6120C,*/
- u32 PP_Cycle_Delay;
- u16 Panel_Backlight_Inverter_Descriptor;
- u16 Panel_MIPI_Display_Descriptor;
-} __packed;
-
-#define MODE_SETTING_IN_CRTC 0x1
-#define MODE_SETTING_IN_ENCODER 0x2
-#define MODE_SETTING_ON_GOING 0x3
-#define MODE_SETTING_IN_DSR 0x4
-#define MODE_SETTING_ENCODER_DONE 0x8
-
-#define GCT_R10_HEADER_SIZE 16
-#define GCT_R10_DISPLAY_DESC_SIZE 28
-
-/*
- * Moorestown HDMI interfaces
- */
-
-struct mrst_hdmi_dev {
- struct pci_dev *dev;
- void __iomem *regs;
- unsigned int mmio, mmio_len;
- int dpms_mode;
- struct hdmi_i2c_dev *i2c_dev;
-
- /* register state */
- u32 saveDPLL_CTRL;
- u32 saveDPLL_DIV_CTRL;
- u32 saveDPLL_ADJUST;
- u32 saveDPLL_UPDATE;
- u32 saveDPLL_CLK_ENABLE;
- u32 savePCH_HTOTAL_B;
- u32 savePCH_HBLANK_B;
- u32 savePCH_HSYNC_B;
- u32 savePCH_VTOTAL_B;
- u32 savePCH_VBLANK_B;
- u32 savePCH_VSYNC_B;
- u32 savePCH_PIPEBCONF;
- u32 savePCH_PIPEBSRC;
-};
-
-extern void mrst_hdmi_setup(struct drm_device *dev);
-extern void mrst_hdmi_teardown(struct drm_device *dev);
-extern int mrst_hdmi_i2c_init(struct pci_dev *dev);
-extern void mrst_hdmi_i2c_exit(struct pci_dev *dev);
-extern void mrst_hdmi_save(struct drm_device *dev);
-extern void mrst_hdmi_restore(struct drm_device *dev);
-extern void mrst_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev);
+++ /dev/null
-/*
- * Copyright © 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/pm_runtime.h>
-
-#include <drm/drmP.h>
-#include "framebuffer.h"
-#include "psb_drv.h"
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "psb_intel_display.h"
-#include "power.h"
-
-struct psb_intel_range_t {
- int min, max;
-};
-
-struct mrst_limit_t {
- struct psb_intel_range_t dot, m, p1;
-};
-
-struct mrst_clock_t {
- /* derived values */
- int dot;
- int m;
- int p1;
-};
-
-#define MRST_LIMIT_LVDS_100L 0
-#define MRST_LIMIT_LVDS_83 1
-#define MRST_LIMIT_LVDS_100 2
-
-#define MRST_DOT_MIN 19750
-#define MRST_DOT_MAX 120000
-#define MRST_M_MIN_100L 20
-#define MRST_M_MIN_100 10
-#define MRST_M_MIN_83 12
-#define MRST_M_MAX_100L 34
-#define MRST_M_MAX_100 17
-#define MRST_M_MAX_83 20
-#define MRST_P1_MIN 2
-#define MRST_P1_MAX_0 7
-#define MRST_P1_MAX_1 8
-
-static const struct mrst_limit_t mrst_limits[] = {
- { /* MRST_LIMIT_LVDS_100L */
- .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
- .m = {.min = MRST_M_MIN_100L, .max = MRST_M_MAX_100L},
- .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
- },
- { /* MRST_LIMIT_LVDS_83L */
- .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
- .m = {.min = MRST_M_MIN_83, .max = MRST_M_MAX_83},
- .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_0},
- },
- { /* MRST_LIMIT_LVDS_100 */
- .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
- .m = {.min = MRST_M_MIN_100, .max = MRST_M_MAX_100},
- .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
- },
-};
-
-#define MRST_M_MIN 10
-static const u32 mrst_m_converts[] = {
- 0x2B, 0x15, 0x2A, 0x35, 0x1A, 0x0D, 0x26, 0x33, 0x19, 0x2C,
- 0x36, 0x3B, 0x1D, 0x2E, 0x37, 0x1B, 0x2D, 0x16, 0x0B, 0x25,
- 0x12, 0x09, 0x24, 0x32, 0x39, 0x1c,
-};
-
-static const struct mrst_limit_t *mrst_limit(struct drm_crtc *crtc)
-{
- const struct mrst_limit_t *limit = NULL;
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
- || psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)) {
- switch (dev_priv->core_freq) {
- case 100:
- limit = &mrst_limits[MRST_LIMIT_LVDS_100L];
- break;
- case 166:
- limit = &mrst_limits[MRST_LIMIT_LVDS_83];
- break;
- case 200:
- limit = &mrst_limits[MRST_LIMIT_LVDS_100];
- break;
- }
- } else {
- limit = NULL;
- dev_err(dev->dev, "mrst_limit Wrong display type.\n");
- }
-
- return limit;
-}
-
-/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
-static void mrst_clock(int refclk, struct mrst_clock_t *clock)
-{
- clock->dot = (refclk * clock->m) / (14 * clock->p1);
-}
-
-void mrstPrintPll(char *prefix, struct mrst_clock_t *clock)
-{
- pr_debug("%s: dotclock = %d, m = %d, p1 = %d.\n",
- prefix, clock->dot, clock->m, clock->p1);
-}
-
-/**
- * Returns a set of divisors for the desired target clock with the given refclk,
- * or FALSE. Divisor values are the actual divisors for
- */
-static bool
-mrstFindBestPLL(struct drm_crtc *crtc, int target, int refclk,
- struct mrst_clock_t *best_clock)
-{
- struct mrst_clock_t clock;
- const struct mrst_limit_t *limit = mrst_limit(crtc);
- int err = target;
-
- memset(best_clock, 0, sizeof(*best_clock));
-
- for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
- for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
- clock.p1++) {
- int this_err;
-
- mrst_clock(refclk, &clock);
-
- this_err = abs(clock.dot - target);
- if (this_err < err) {
- *best_clock = clock;
- err = this_err;
- }
- }
- }
- dev_dbg(crtc->dev->dev, "mrstFindBestPLL err = %d.\n", err);
- return err != target;
-}
-
-/**
- * Sets the power management mode of the pipe and plane.
- *
- * This code should probably grow support for turning the cursor off and back
- * on appropriately at the same time as we're turning the pipe off/on.
- */
-static void mrst_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- int dpll_reg = (pipe == 0) ? MRST_DPLL_A : DPLL_B;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
- int dspbase_reg = (pipe == 0) ? MRST_DSPABASE : DSPBBASE;
- int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
- u32 temp;
- bool enabled;
-
- if (!gma_power_begin(dev, true))
- return;
-
- /* XXX: When our outputs are all unaware of DPMS modes other than off
- * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
- */
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- /* Enable the DPLL */
- temp = REG_READ(dpll_reg);
- if ((temp & DPLL_VCO_ENABLE) == 0) {
- REG_WRITE(dpll_reg, temp);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
- REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
- REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
- }
- /* Enable the pipe */
- temp = REG_READ(pipeconf_reg);
- if ((temp & PIPEACONF_ENABLE) == 0)
- REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
- /* Enable the plane */
- temp = REG_READ(dspcntr_reg);
- if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
- REG_WRITE(dspcntr_reg,
- temp | DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
- }
-
- psb_intel_crtc_load_lut(crtc);
-
- /* Give the overlay scaler a chance to enable
- if it's on this pipe */
- /* psb_intel_crtc_dpms_video(crtc, true); TODO */
- break;
- case DRM_MODE_DPMS_OFF:
- /* Give the overlay scaler a chance to disable
- * if it's on this pipe */
- /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
-
- /* Disable the VGA plane that we never use */
- REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
- /* Disable display plane */
- temp = REG_READ(dspcntr_reg);
- if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
- REG_WRITE(dspcntr_reg,
- temp & ~DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
- REG_READ(dspbase_reg);
- }
-
- /* Next, disable display pipes */
- temp = REG_READ(pipeconf_reg);
- if ((temp & PIPEACONF_ENABLE) != 0) {
- REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
- REG_READ(pipeconf_reg);
- }
- /* Wait for for the pipe disable to take effect. */
- psb_intel_wait_for_vblank(dev);
-
- temp = REG_READ(dpll_reg);
- if ((temp & DPLL_VCO_ENABLE) != 0) {
- REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
- }
-
- /* Wait for the clocks to turn off. */
- udelay(150);
- break;
- }
-
- enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
-
- /*Set FIFO Watermarks*/
- REG_WRITE(DSPARB, 0x3FFF);
- REG_WRITE(DSPFW1, 0x3F88080A);
- REG_WRITE(DSPFW2, 0x0b060808);
- REG_WRITE(DSPFW3, 0x0);
- REG_WRITE(DSPFW4, 0x08030404);
- REG_WRITE(DSPFW5, 0x04040404);
- REG_WRITE(DSPFW6, 0x78);
- REG_WRITE(0x70400, REG_READ(0x70400) | 0x4000);
- /* Must write Bit 14 of the Chicken Bit Register */
-
- gma_power_end(dev);
-}
-
-/**
- * Return the pipe currently connected to the panel fitter,
- * or -1 if the panel fitter is not present or not in use
- */
-static int mrst_panel_fitter_pipe(struct drm_device *dev)
-{
- u32 pfit_control;
-
- pfit_control = REG_READ(PFIT_CONTROL);
-
- /* See if the panel fitter is in use */
- if ((pfit_control & PFIT_ENABLE) == 0)
- return -1;
- return (pfit_control >> 29) & 3;
-}
-
-static int mrst_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct drm_psb_private *dev_priv = dev->dev_private;
- int pipe = psb_intel_crtc->pipe;
- int fp_reg = (pipe == 0) ? MRST_FPA0 : FPB0;
- int dpll_reg = (pipe == 0) ? MRST_DPLL_A : DPLL_B;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
- int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
- int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
- int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
- int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
- int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
- int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
- int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
- int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
- int refclk = 0;
- struct mrst_clock_t clock;
- u32 dpll = 0, fp = 0, dspcntr, pipeconf;
- bool ok, is_sdvo = false;
- bool is_crt = false, is_lvds = false, is_tv = false;
- bool is_mipi = false;
- struct drm_mode_config *mode_config = &dev->mode_config;
- struct psb_intel_output *psb_intel_output = NULL;
- uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
- struct drm_encoder *encoder;
-
- if (!gma_power_begin(dev, true))
- return 0;
-
- memcpy(&psb_intel_crtc->saved_mode,
- mode,
- sizeof(struct drm_display_mode));
- memcpy(&psb_intel_crtc->saved_adjusted_mode,
- adjusted_mode,
- sizeof(struct drm_display_mode));
-
- list_for_each_entry(encoder, &mode_config->encoder_list, head) {
-
- if (encoder->crtc != crtc)
- continue;
-
- psb_intel_output = enc_to_psb_intel_output(encoder);
- switch (psb_intel_output->type) {
- case INTEL_OUTPUT_LVDS:
- is_lvds = true;
- break;
- case INTEL_OUTPUT_SDVO:
- is_sdvo = true;
- break;
- case INTEL_OUTPUT_TVOUT:
- is_tv = true;
- break;
- case INTEL_OUTPUT_ANALOG:
- is_crt = true;
- break;
- case INTEL_OUTPUT_MIPI:
- is_mipi = true;
- break;
- }
- }
-
- /* Disable the VGA plane that we never use */
- REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
-
- /* Disable the panel fitter if it was on our pipe */
- if (mrst_panel_fitter_pipe(dev) == pipe)
- REG_WRITE(PFIT_CONTROL, 0);
-
- REG_WRITE(pipesrc_reg,
- ((mode->crtc_hdisplay - 1) << 16) |
- (mode->crtc_vdisplay - 1));
-
- if (psb_intel_output)
- drm_connector_property_get_value(&psb_intel_output->base,
- dev->mode_config.scaling_mode_property, &scalingType);
-
- if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
- /* Moorestown doesn't have register support for centering so
- * we need to mess with the h/vblank and h/vsync start and
- * ends to get centering */
- int offsetX = 0, offsetY = 0;
-
- offsetX = (adjusted_mode->crtc_hdisplay -
- mode->crtc_hdisplay) / 2;
- offsetY = (adjusted_mode->crtc_vdisplay -
- mode->crtc_vdisplay) / 2;
-
- REG_WRITE(htot_reg, (mode->crtc_hdisplay - 1) |
- ((adjusted_mode->crtc_htotal - 1) << 16));
- REG_WRITE(vtot_reg, (mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
- REG_WRITE(hblank_reg,
- (adjusted_mode->crtc_hblank_start - offsetX - 1) |
- ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16));
- REG_WRITE(hsync_reg,
- (adjusted_mode->crtc_hsync_start - offsetX - 1) |
- ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16));
- REG_WRITE(vblank_reg,
- (adjusted_mode->crtc_vblank_start - offsetY - 1) |
- ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16));
- REG_WRITE(vsync_reg,
- (adjusted_mode->crtc_vsync_start - offsetY - 1) |
- ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16));
- } else {
- REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
- ((adjusted_mode->crtc_htotal - 1) << 16));
- REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
- REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
- ((adjusted_mode->crtc_hblank_end - 1) << 16));
- REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
- ((adjusted_mode->crtc_hsync_end - 1) << 16));
- REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
- ((adjusted_mode->crtc_vblank_end - 1) << 16));
- REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
- ((adjusted_mode->crtc_vsync_end - 1) << 16));
- }
-
- /* Flush the plane changes */
- {
- struct drm_crtc_helper_funcs *crtc_funcs =
- crtc->helper_private;
- crtc_funcs->mode_set_base(crtc, x, y, old_fb);
- }
-
- /* setup pipeconf */
- pipeconf = REG_READ(pipeconf_reg);
-
- /* Set up the display plane register */
- dspcntr = REG_READ(dspcntr_reg);
- dspcntr |= DISPPLANE_GAMMA_ENABLE;
-
- if (pipe == 0)
- dspcntr |= DISPPLANE_SEL_PIPE_A;
- else
- dspcntr |= DISPPLANE_SEL_PIPE_B;
-
- dev_priv->dspcntr = dspcntr |= DISPLAY_PLANE_ENABLE;
- dev_priv->pipeconf = pipeconf |= PIPEACONF_ENABLE;
-
- if (is_mipi)
- goto mrst_crtc_mode_set_exit;
-
- refclk = dev_priv->core_freq * 1000;
-
- dpll = 0; /*BIT16 = 0 for 100MHz reference */
-
- ok = mrstFindBestPLL(crtc, adjusted_mode->clock, refclk, &clock);
-
- if (!ok) {
- dev_dbg(dev->dev, "mrstFindBestPLL fail in mrst_crtc_mode_set.\n");
- } else {
- dev_dbg(dev->dev, "mrst_crtc_mode_set pixel clock = %d,"
- "m = %x, p1 = %x.\n", clock.dot, clock.m,
- clock.p1);
- }
-
- fp = mrst_m_converts[(clock.m - MRST_M_MIN)] << 8;
-
- dpll |= DPLL_VGA_MODE_DIS;
-
-
- dpll |= DPLL_VCO_ENABLE;
-
- if (is_lvds)
- dpll |= DPLLA_MODE_LVDS;
- else
- dpll |= DPLLB_MODE_DAC_SERIAL;
-
- if (is_sdvo) {
- int sdvo_pixel_multiply =
- adjusted_mode->clock / mode->clock;
-
- dpll |= DPLL_DVO_HIGH_SPEED;
- dpll |=
- (sdvo_pixel_multiply -
- 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
- }
-
-
- /* compute bitmask from p1 value */
- dpll |= (1 << (clock.p1 - 2)) << 17;
-
- dpll |= DPLL_VCO_ENABLE;
-
- mrstPrintPll("chosen", &clock);
-
- if (dpll & DPLL_VCO_ENABLE) {
- REG_WRITE(fp_reg, fp);
- REG_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
- /* Check the DPLLA lock bit PIPEACONF[29] */
- udelay(150);
- }
-
- REG_WRITE(fp_reg, fp);
- REG_WRITE(dpll_reg, dpll);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
-
- /* write it again -- the BIOS does, after all */
- REG_WRITE(dpll_reg, dpll);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
-
- REG_WRITE(pipeconf_reg, pipeconf);
- REG_READ(pipeconf_reg);
- psb_intel_wait_for_vblank(dev);
-
- REG_WRITE(dspcntr_reg, dspcntr);
- psb_intel_wait_for_vblank(dev);
-
-mrst_crtc_mode_set_exit:
- gma_power_end(dev);
- return 0;
-}
-
-static bool mrst_crtc_mode_fixup(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- return true;
-}
-
-int mrst_pipe_set_base(struct drm_crtc *crtc,
- int x, int y, struct drm_framebuffer *old_fb)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
- int pipe = psb_intel_crtc->pipe;
- unsigned long start, offset;
-
- int dspbase = (pipe == 0 ? DSPALINOFF : DSPBBASE);
- int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
- int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
- u32 dspcntr;
- int ret = 0;
-
- /* no fb bound */
- if (!crtc->fb) {
- dev_dbg(dev->dev, "No FB bound\n");
- return 0;
- }
-
- if (!gma_power_begin(dev, true))
- return 0;
-
- start = psbfb->gtt->offset;
- offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8);
-
- REG_WRITE(dspstride, crtc->fb->pitches[0]);
-
- dspcntr = REG_READ(dspcntr_reg);
- dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
-
- switch (crtc->fb->bits_per_pixel) {
- case 8:
- dspcntr |= DISPPLANE_8BPP;
- break;
- case 16:
- if (crtc->fb->depth == 15)
- dspcntr |= DISPPLANE_15_16BPP;
- else
- dspcntr |= DISPPLANE_16BPP;
- break;
- case 24:
- case 32:
- dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
- break;
- default:
- dev_err(dev->dev, "Unknown color depth\n");
- ret = -EINVAL;
- goto pipe_set_base_exit;
- }
- REG_WRITE(dspcntr_reg, dspcntr);
-
- REG_WRITE(dspbase, offset);
- REG_READ(dspbase);
- REG_WRITE(dspsurf, start);
- REG_READ(dspsurf);
-
-pipe_set_base_exit:
- gma_power_end(dev);
- return ret;
-}
-
-static void mrst_crtc_prepare(struct drm_crtc *crtc)
-{
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
-}
-
-static void mrst_crtc_commit(struct drm_crtc *crtc)
-{
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
-}
-
-const struct drm_crtc_helper_funcs mrst_helper_funcs = {
- .dpms = mrst_crtc_dpms,
- .mode_fixup = mrst_crtc_mode_fixup,
- .mode_set = mrst_crtc_mode_set,
- .mode_set_base = mrst_pipe_set_base,
- .prepare = mrst_crtc_prepare,
- .commit = mrst_crtc_commit,
-};
-
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-#include <linux/backlight.h>
-#include <linux/module.h>
-#include <linux/dmi.h>
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include "psb_drm.h"
-#include "psb_drv.h"
-#include "psb_reg.h"
-#include "psb_intel_reg.h"
-#include <asm/mrst.h>
-#include <asm/intel_scu_ipc.h>
-#include "mid_bios.h"
-
-static int devtype;
-
-module_param_named(type, devtype, int, 0600);
-MODULE_PARM_DESC(type, "Moorestown/Oaktrail device type");
-
-#define DEVICE_MOORESTOWN 1
-#define DEVICE_OAKTRAIL 2
-#define DEVICE_MOORESTOWN_MM 3
-
-static int mrst_device_ident(struct drm_device *dev)
-{
- /* User forced */
- if (devtype)
- return devtype;
- if (dmi_match(DMI_PRODUCT_NAME, "OakTrail") ||
- dmi_match(DMI_PRODUCT_NAME, "OakTrail platform"))
- return DEVICE_OAKTRAIL;
-#if defined(CONFIG_X86_MRST)
- if (dmi_match(DMI_PRODUCT_NAME, "MM") ||
- dmi_match(DMI_PRODUCT_NAME, "MM 10"))
- return DEVICE_MOORESTOWN_MM;
- if (mrst_identify_cpu())
- return DEVICE_MOORESTOWN;
-#endif
- return DEVICE_OAKTRAIL;
-}
-
-
-/* IPC message and command defines used to enable/disable mipi panel voltages */
-#define IPC_MSG_PANEL_ON_OFF 0xE9
-#define IPC_CMD_PANEL_ON 1
-#define IPC_CMD_PANEL_OFF 0
-
-static int mrst_output_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- if (dev_priv->iLVDS_enable)
- mrst_lvds_init(dev, &dev_priv->mode_dev);
- else
- dev_err(dev->dev, "DSI is not supported\n");
- if (dev_priv->hdmi_priv)
- mrst_hdmi_init(dev, &dev_priv->mode_dev);
- return 0;
-}
-
-/*
- * Provide the low level interfaces for the Moorestown backlight
- */
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-
-#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF
-#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */
-#define BLC_PWM_FREQ_CALC_CONSTANT 32
-#define MHz 1000000
-#define BLC_ADJUSTMENT_MAX 100
-
-static struct backlight_device *mrst_backlight_device;
-static int mrst_brightness;
-
-static int mrst_set_brightness(struct backlight_device *bd)
-{
- struct drm_device *dev = bl_get_data(mrst_backlight_device);
- struct drm_psb_private *dev_priv = dev->dev_private;
- int level = bd->props.brightness;
- u32 blc_pwm_ctl;
- u32 max_pwm_blc;
-
- /* Percentage 1-100% being valid */
- if (level < 1)
- level = 1;
-
- if (gma_power_begin(dev, 0)) {
- /* Calculate and set the brightness value */
- max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16;
- blc_pwm_ctl = level * max_pwm_blc / 100;
-
- /* Adjust the backlight level with the percent in
- * dev_priv->blc_adj1;
- */
- blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1;
- blc_pwm_ctl = blc_pwm_ctl / 100;
-
- /* Adjust the backlight level with the percent in
- * dev_priv->blc_adj2;
- */
- blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2;
- blc_pwm_ctl = blc_pwm_ctl / 100;
-
- /* force PWM bit on */
- REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
- REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl);
- gma_power_end(dev);
- }
- mrst_brightness = level;
- return 0;
-}
-
-static int mrst_get_brightness(struct backlight_device *bd)
-{
- /* return locally cached var instead of HW read (due to DPST etc.) */
- /* FIXME: ideally return actual value in case firmware fiddled with
- it */
- return mrst_brightness;
-}
-
-static int device_backlight_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- unsigned long core_clock;
- u16 bl_max_freq;
- uint32_t value;
- uint32_t blc_pwm_precision_factor;
-
- dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX;
- dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX;
- bl_max_freq = 256;
- /* this needs to be set elsewhere */
- blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR;
-
- core_clock = dev_priv->core_freq;
-
- value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
- value *= blc_pwm_precision_factor;
- value /= bl_max_freq;
- value /= blc_pwm_precision_factor;
-
- if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ)
- return -ERANGE;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
- REG_WRITE(BLC_PWM_CTL, value | (value << 16));
- gma_power_end(dev);
- }
- return 0;
-}
-
-static const struct backlight_ops mrst_ops = {
- .get_brightness = mrst_get_brightness,
- .update_status = mrst_set_brightness,
-};
-
-int mrst_backlight_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- int ret;
- struct backlight_properties props;
-
- memset(&props, 0, sizeof(struct backlight_properties));
- props.max_brightness = 100;
- props.type = BACKLIGHT_PLATFORM;
-
- mrst_backlight_device = backlight_device_register("mrst-bl",
- NULL, (void *)dev, &mrst_ops, &props);
-
- if (IS_ERR(mrst_backlight_device))
- return PTR_ERR(mrst_backlight_device);
-
- ret = device_backlight_init(dev);
- if (ret < 0) {
- backlight_device_unregister(mrst_backlight_device);
- return ret;
- }
- mrst_backlight_device->props.brightness = 100;
- mrst_backlight_device->props.max_brightness = 100;
- backlight_update_status(mrst_backlight_device);
- dev_priv->backlight_device = mrst_backlight_device;
- return 0;
-}
-
-#endif
-
-/*
- * Provide the Moorestown specific chip logic and low level methods
- * for power management
- */
-
-static void mrst_init_pm(struct drm_device *dev)
-{
-}
-
-/**
- * mrst_save_display_registers - save registers lost on suspend
- * @dev: our DRM device
- *
- * Save the state we need in order to be able to restore the interface
- * upon resume from suspend
- */
-static int mrst_save_display_registers(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- int i;
- u32 pp_stat;
-
- /* Display arbitration control + watermarks */
- dev_priv->saveDSPARB = PSB_RVDC32(DSPARB);
- dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1);
- dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2);
- dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3);
- dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4);
- dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5);
- dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6);
- dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
-
- /* Pipe & plane A info */
- dev_priv->savePIPEACONF = PSB_RVDC32(PIPEACONF);
- dev_priv->savePIPEASRC = PSB_RVDC32(PIPEASRC);
- dev_priv->saveFPA0 = PSB_RVDC32(MRST_FPA0);
- dev_priv->saveFPA1 = PSB_RVDC32(MRST_FPA1);
- dev_priv->saveDPLL_A = PSB_RVDC32(MRST_DPLL_A);
- dev_priv->saveHTOTAL_A = PSB_RVDC32(HTOTAL_A);
- dev_priv->saveHBLANK_A = PSB_RVDC32(HBLANK_A);
- dev_priv->saveHSYNC_A = PSB_RVDC32(HSYNC_A);
- dev_priv->saveVTOTAL_A = PSB_RVDC32(VTOTAL_A);
- dev_priv->saveVBLANK_A = PSB_RVDC32(VBLANK_A);
- dev_priv->saveVSYNC_A = PSB_RVDC32(VSYNC_A);
- dev_priv->saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A);
- dev_priv->saveDSPACNTR = PSB_RVDC32(DSPACNTR);
- dev_priv->saveDSPASTRIDE = PSB_RVDC32(DSPASTRIDE);
- dev_priv->saveDSPAADDR = PSB_RVDC32(DSPABASE);
- dev_priv->saveDSPASURF = PSB_RVDC32(DSPASURF);
- dev_priv->saveDSPALINOFF = PSB_RVDC32(DSPALINOFF);
- dev_priv->saveDSPATILEOFF = PSB_RVDC32(DSPATILEOFF);
-
- /* Save cursor regs */
- dev_priv->saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR);
- dev_priv->saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE);
- dev_priv->saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS);
-
- /* Save palette (gamma) */
- for (i = 0; i < 256; i++)
- dev_priv->save_palette_a[i] = PSB_RVDC32(PALETTE_A + (i << 2));
-
- if (dev_priv->hdmi_priv)
- mrst_hdmi_save(dev);
-
- /* Save performance state */
- dev_priv->savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE);
-
- /* LVDS state */
- dev_priv->savePP_CONTROL = PSB_RVDC32(PP_CONTROL);
- dev_priv->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
- dev_priv->savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS);
- dev_priv->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL);
- dev_priv->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2);
- dev_priv->saveLVDS = PSB_RVDC32(LVDS);
- dev_priv->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
- dev_priv->savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON);
- dev_priv->savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF);
- dev_priv->savePP_DIVISOR = PSB_RVDC32(PP_CYCLE);
-
- /* HW overlay */
- dev_priv->saveOV_OVADD = PSB_RVDC32(OV_OVADD);
- dev_priv->saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0);
- dev_priv->saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1);
- dev_priv->saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2);
- dev_priv->saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3);
- dev_priv->saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4);
- dev_priv->saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5);
-
- /* DPST registers */
- dev_priv->saveHISTOGRAM_INT_CONTROL_REG =
- PSB_RVDC32(HISTOGRAM_INT_CONTROL);
- dev_priv->saveHISTOGRAM_LOGIC_CONTROL_REG =
- PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL);
- dev_priv->savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC);
-
- if (dev_priv->iLVDS_enable) {
- /* Shut down the panel */
- PSB_WVDC32(0, PP_CONTROL);
-
- do {
- pp_stat = PSB_RVDC32(PP_STATUS);
- } while (pp_stat & 0x80000000);
-
- /* Turn off the plane */
- PSB_WVDC32(0x58000000, DSPACNTR);
- /* Trigger the plane disable */
- PSB_WVDC32(0, DSPASURF);
-
- /* Wait ~4 ticks */
- msleep(4);
-
- /* Turn off pipe */
- PSB_WVDC32(0x0, PIPEACONF);
- /* Wait ~8 ticks */
- msleep(8);
-
- /* Turn off PLLs */
- PSB_WVDC32(0, MRST_DPLL_A);
- }
- return 0;
-}
-
-/**
- * mrst_restore_display_registers - restore lost register state
- * @dev: our DRM device
- *
- * Restore register state that was lost during suspend and resume.
- */
-static int mrst_restore_display_registers(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 pp_stat;
- int i;
-
- /* Display arbitration + watermarks */
- PSB_WVDC32(dev_priv->saveDSPARB, DSPARB);
- PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1);
- PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2);
- PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3);
- PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4);
- PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5);
- PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6);
- PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT);
-
- /* Make sure VGA plane is off. it initializes to on after reset!*/
- PSB_WVDC32(0x80000000, VGACNTRL);
-
- /* set the plls */
- PSB_WVDC32(dev_priv->saveFPA0, MRST_FPA0);
- PSB_WVDC32(dev_priv->saveFPA1, MRST_FPA1);
-
- /* Actually enable it */
- PSB_WVDC32(dev_priv->saveDPLL_A, MRST_DPLL_A);
- DRM_UDELAY(150);
-
- /* Restore mode */
- PSB_WVDC32(dev_priv->saveHTOTAL_A, HTOTAL_A);
- PSB_WVDC32(dev_priv->saveHBLANK_A, HBLANK_A);
- PSB_WVDC32(dev_priv->saveHSYNC_A, HSYNC_A);
- PSB_WVDC32(dev_priv->saveVTOTAL_A, VTOTAL_A);
- PSB_WVDC32(dev_priv->saveVBLANK_A, VBLANK_A);
- PSB_WVDC32(dev_priv->saveVSYNC_A, VSYNC_A);
- PSB_WVDC32(dev_priv->savePIPEASRC, PIPEASRC);
- PSB_WVDC32(dev_priv->saveBCLRPAT_A, BCLRPAT_A);
-
- /* Restore performance mode*/
- PSB_WVDC32(dev_priv->savePERF_MODE, MRST_PERF_MODE);
-
- /* Enable the pipe*/
- if (dev_priv->iLVDS_enable)
- PSB_WVDC32(dev_priv->savePIPEACONF, PIPEACONF);
-
- /* Set up the plane*/
- PSB_WVDC32(dev_priv->saveDSPALINOFF, DSPALINOFF);
- PSB_WVDC32(dev_priv->saveDSPASTRIDE, DSPASTRIDE);
- PSB_WVDC32(dev_priv->saveDSPATILEOFF, DSPATILEOFF);
-
- /* Enable the plane */
- PSB_WVDC32(dev_priv->saveDSPACNTR, DSPACNTR);
- PSB_WVDC32(dev_priv->saveDSPASURF, DSPASURF);
-
- /* Enable Cursor A */
- PSB_WVDC32(dev_priv->saveDSPACURSOR_CTRL, CURACNTR);
- PSB_WVDC32(dev_priv->saveDSPACURSOR_POS, CURAPOS);
- PSB_WVDC32(dev_priv->saveDSPACURSOR_BASE, CURABASE);
-
- /* Restore palette (gamma) */
- for (i = 0; i < 256; i++)
- PSB_WVDC32(dev_priv->save_palette_a[i], PALETTE_A + (i << 2));
-
- if (dev_priv->hdmi_priv)
- mrst_hdmi_restore(dev);
-
- if (dev_priv->iLVDS_enable) {
- PSB_WVDC32(dev_priv->saveBLC_PWM_CTL2, BLC_PWM_CTL2);
- PSB_WVDC32(dev_priv->saveLVDS, LVDS); /*port 61180h*/
- PSB_WVDC32(dev_priv->savePFIT_CONTROL, PFIT_CONTROL);
- PSB_WVDC32(dev_priv->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
- PSB_WVDC32(dev_priv->savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS);
- PSB_WVDC32(dev_priv->saveBLC_PWM_CTL, BLC_PWM_CTL);
- PSB_WVDC32(dev_priv->savePP_ON_DELAYS, LVDSPP_ON);
- PSB_WVDC32(dev_priv->savePP_OFF_DELAYS, LVDSPP_OFF);
- PSB_WVDC32(dev_priv->savePP_DIVISOR, PP_CYCLE);
- PSB_WVDC32(dev_priv->savePP_CONTROL, PP_CONTROL);
- }
-
- /* Wait for cycle delay */
- do {
- pp_stat = PSB_RVDC32(PP_STATUS);
- } while (pp_stat & 0x08000000);
-
- /* Wait for panel power up */
- do {
- pp_stat = PSB_RVDC32(PP_STATUS);
- } while (pp_stat & 0x10000000);
-
- /* Restore HW overlay */
- PSB_WVDC32(dev_priv->saveOV_OVADD, OV_OVADD);
- PSB_WVDC32(dev_priv->saveOV_OGAMC0, OV_OGAMC0);
- PSB_WVDC32(dev_priv->saveOV_OGAMC1, OV_OGAMC1);
- PSB_WVDC32(dev_priv->saveOV_OGAMC2, OV_OGAMC2);
- PSB_WVDC32(dev_priv->saveOV_OGAMC3, OV_OGAMC3);
- PSB_WVDC32(dev_priv->saveOV_OGAMC4, OV_OGAMC4);
- PSB_WVDC32(dev_priv->saveOV_OGAMC5, OV_OGAMC5);
-
- /* DPST registers */
- PSB_WVDC32(dev_priv->saveHISTOGRAM_INT_CONTROL_REG,
- HISTOGRAM_INT_CONTROL);
- PSB_WVDC32(dev_priv->saveHISTOGRAM_LOGIC_CONTROL_REG,
- HISTOGRAM_LOGIC_CONTROL);
- PSB_WVDC32(dev_priv->savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC);
-
- return 0;
-}
-
-/**
- * mrst_power_down - power down the display island
- * @dev: our DRM device
- *
- * Power down the display interface of our device
- */
-static int mrst_power_down(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 pwr_mask ;
- u32 pwr_sts;
-
- pwr_mask = PSB_PWRGT_DISPLAY_MASK;
- outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC);
-
- while (true) {
- pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
- if ((pwr_sts & pwr_mask) == pwr_mask)
- break;
- else
- udelay(10);
- }
- return 0;
-}
-
-/*
- * mrst_power_up
- *
- * Restore power to the specified island(s) (powergating)
- */
-static int mrst_power_up(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK;
- u32 pwr_sts, pwr_cnt;
-
- pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
- pwr_cnt &= ~pwr_mask;
- outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC));
-
- while (true) {
- pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
- if ((pwr_sts & pwr_mask) == 0)
- break;
- else
- udelay(10);
- }
- return 0;
-}
-
-#if defined(CONFIG_X86_MRST)
-static void mrst_lvds_cache_bl(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- intel_scu_ipc_ioread8(0x28, &(dev_priv->saveBKLTCNT));
- intel_scu_ipc_ioread8(0x29, &(dev_priv->saveBKLTREQ));
- intel_scu_ipc_ioread8(0x2A, &(dev_priv->saveBKLTBRTL));
-}
-
-static void mrst_mm_bl_power(struct drm_device *dev, bool on)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (on) {
- intel_scu_ipc_iowrite8(0x2A, dev_priv->saveBKLTBRTL);
- intel_scu_ipc_iowrite8(0x28, dev_priv->saveBKLTCNT);
- intel_scu_ipc_iowrite8(0x29, dev_priv->saveBKLTREQ);
- } else {
- intel_scu_ipc_iowrite8(0x2A, 0);
- intel_scu_ipc_iowrite8(0x28, 0);
- intel_scu_ipc_iowrite8(0x29, 0);
- }
-}
-
-static const struct psb_ops mrst_mm_chip_ops = {
- .name = "Moorestown MM ",
- .accel_2d = 1,
- .pipes = 1,
- .crtcs = 1,
- .sgx_offset = MRST_SGX_OFFSET,
-
- .crtc_helper = &mrst_helper_funcs,
- .crtc_funcs = &psb_intel_crtc_funcs,
-
- .output_init = mrst_output_init,
-
- .lvds_bl_power = mrst_mm_bl_power,
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- .backlight_init = mrst_backlight_init,
-#endif
-
- .init_pm = mrst_init_pm,
- .save_regs = mrst_save_display_registers,
- .restore_regs = mrst_restore_display_registers,
- .power_down = mrst_power_down,
- .power_up = mrst_power_up,
-
- .i2c_bus = 0,
-};
-
-#endif
-
-static void oaktrail_teardown(struct drm_device *dev)
-{
- mrst_hdmi_teardown(dev);
-}
-
-static const struct psb_ops oaktrail_chip_ops = {
- .name = "Oaktrail",
- .accel_2d = 1,
- .pipes = 2,
- .crtcs = 2,
- .sgx_offset = MRST_SGX_OFFSET,
-
- .chip_setup = mid_chip_setup,
- .chip_teardown = oaktrail_teardown,
- .crtc_helper = &mrst_helper_funcs,
- .crtc_funcs = &psb_intel_crtc_funcs,
-
- .output_init = mrst_output_init,
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- .backlight_init = mrst_backlight_init,
-#endif
-
- .init_pm = mrst_init_pm,
- .save_regs = mrst_save_display_registers,
- .restore_regs = mrst_restore_display_registers,
- .power_down = mrst_power_down,
- .power_up = mrst_power_up,
-
- .i2c_bus = 1,
-};
-
-/**
- * mrst_chip_setup - perform the initial chip init
- * @dev: Our drm_device
- *
- * Figure out which incarnation we are and then scan the firmware for
- * tables and information.
- */
-static int mrst_chip_setup(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- switch (mrst_device_ident(dev)) {
- case DEVICE_OAKTRAIL:
- /* Dual CRTC, PC compatible, HDMI, I2C #2 */
- dev_priv->ops = &oaktrail_chip_ops;
- mrst_hdmi_setup(dev);
- return mid_chip_setup(dev);
-#if defined(CONFIG_X86_MRST)
- case DEVICE_MOORESTOWN_MM:
- /* Single CRTC, No HDMI, I2C #0, BL control */
- mrst_lvds_cache_bl(dev);
- dev_priv->ops = &mrst_mm_chip_ops;
- return mid_chip_setup(dev);
- case DEVICE_MOORESTOWN:
- /* Dual CRTC, No HDMI(?), I2C #1 */
- return mid_chip_setup(dev);
-#endif
- default:
- dev_err(dev->dev, "unsupported device type.\n");
- return -ENODEV;
- }
-}
-
-const struct psb_ops mrst_chip_ops = {
- .name = "Moorestown",
- .accel_2d = 1,
- .pipes = 2,
- .crtcs = 2,
- .sgx_offset = MRST_SGX_OFFSET,
-
- .chip_setup = mrst_chip_setup,
- .crtc_helper = &mrst_helper_funcs,
- .crtc_funcs = &psb_intel_crtc_funcs,
-
- .output_init = mrst_output_init,
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- .backlight_init = mrst_backlight_init,
-#endif
-
- .init_pm = mrst_init_pm,
- .save_regs = mrst_save_display_registers,
- .restore_regs = mrst_restore_display_registers,
- .power_down = mrst_power_down,
- .power_up = mrst_power_up,
-
- .i2c_bus = 2,
-};
-
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Li Peng <peng.li@intel.com>
- */
-
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "psb_drv.h"
-
-#define HDMI_READ(reg) readl(hdmi_dev->regs + (reg))
-#define HDMI_WRITE(reg, val) writel(val, hdmi_dev->regs + (reg))
-
-#define HDMI_HCR 0x1000
-#define HCR_ENABLE_HDCP (1 << 5)
-#define HCR_ENABLE_AUDIO (1 << 2)
-#define HCR_ENABLE_PIXEL (1 << 1)
-#define HCR_ENABLE_TMDS (1 << 0)
-
-#define HDMI_HICR 0x1004
-#define HDMI_HSR 0x1008
-#define HDMI_HISR 0x100C
-#define HDMI_DETECT_HDP (1 << 0)
-
-#define HDMI_VIDEO_REG 0x3000
-#define HDMI_UNIT_EN (1 << 7)
-#define HDMI_MODE_OUTPUT (1 << 0)
-#define HDMI_HBLANK_A 0x3100
-
-#define HDMI_AUDIO_CTRL 0x4000
-#define HDMI_ENABLE_AUDIO (1 << 0)
-
-#define PCH_HTOTAL_B 0x3100
-#define PCH_HBLANK_B 0x3104
-#define PCH_HSYNC_B 0x3108
-#define PCH_VTOTAL_B 0x310C
-#define PCH_VBLANK_B 0x3110
-#define PCH_VSYNC_B 0x3114
-#define PCH_PIPEBSRC 0x311C
-
-#define PCH_PIPEB_DSL 0x3800
-#define PCH_PIPEB_SLC 0x3804
-#define PCH_PIPEBCONF 0x3808
-#define PCH_PIPEBSTAT 0x3824
-
-#define CDVO_DFT 0x5000
-#define CDVO_SLEWRATE 0x5004
-#define CDVO_STRENGTH 0x5008
-#define CDVO_RCOMP 0x500C
-
-#define DPLL_CTRL 0x6000
-#define DPLL_PDIV_SHIFT 16
-#define DPLL_PDIV_MASK (0xf << 16)
-#define DPLL_PWRDN (1 << 4)
-#define DPLL_RESET (1 << 3)
-#define DPLL_FASTEN (1 << 2)
-#define DPLL_ENSTAT (1 << 1)
-#define DPLL_DITHEN (1 << 0)
-
-#define DPLL_DIV_CTRL 0x6004
-#define DPLL_CLKF_MASK 0xffffffc0
-#define DPLL_CLKR_MASK (0x3f)
-
-#define DPLL_CLK_ENABLE 0x6008
-#define DPLL_EN_DISP (1 << 31)
-#define DPLL_SEL_HDMI (1 << 8)
-#define DPLL_EN_HDMI (1 << 1)
-#define DPLL_EN_VGA (1 << 0)
-
-#define DPLL_ADJUST 0x600C
-#define DPLL_STATUS 0x6010
-#define DPLL_UPDATE 0x6014
-#define DPLL_DFT 0x6020
-
-struct intel_range {
- int min, max;
-};
-
-struct mrst_hdmi_limit {
- struct intel_range vco, np, nr, nf;
-};
-
-struct mrst_hdmi_clock {
- int np;
- int nr;
- int nf;
- int dot;
-};
-
-#define VCO_MIN 320000
-#define VCO_MAX 1650000
-#define NP_MIN 1
-#define NP_MAX 15
-#define NR_MIN 1
-#define NR_MAX 64
-#define NF_MIN 2
-#define NF_MAX 4095
-
-static const struct mrst_hdmi_limit mrst_hdmi_limit = {
- .vco = { .min = VCO_MIN, .max = VCO_MAX },
- .np = { .min = NP_MIN, .max = NP_MAX },
- .nr = { .min = NR_MIN, .max = NR_MAX },
- .nf = { .min = NF_MIN, .max = NF_MAX },
-};
-
-static void wait_for_vblank(struct drm_device *dev)
-{
- /* FIXME: Can we do this as a sleep ? */
- /* Wait for 20ms, i.e. one cycle at 50hz. */
- mdelay(20);
-}
-
-static void scu_busy_loop(void *scu_base)
-{
- u32 status = 0;
- u32 loop_count = 0;
-
- status = readl(scu_base + 0x04);
- while (status & 1) {
- udelay(1); /* scu processing time is in few u secods */
- status = readl(scu_base + 0x04);
- loop_count++;
- /* break if scu doesn't reset busy bit after huge retry */
- if (loop_count > 1000) {
- DRM_DEBUG_KMS("SCU IPC timed out");
- return;
- }
- }
-}
-
-static void mrst_hdmi_reset(struct drm_device *dev)
-{
- void *base;
- /* FIXME: at least make these defines */
- unsigned int scu_ipc_mmio = 0xff11c000;
- int scu_len = 1024;
-
- base = ioremap((resource_size_t)scu_ipc_mmio, scu_len);
- if (base == NULL) {
- DRM_ERROR("failed to map SCU mmio\n");
- return;
- }
-
- /* scu ipc: assert hdmi controller reset */
- writel(0xff11d118, base + 0x0c);
- writel(0x7fffffdf, base + 0x80);
- writel(0x42005, base + 0x0);
- scu_busy_loop(base);
-
- /* scu ipc: de-assert hdmi controller reset */
- writel(0xff11d118, base + 0x0c);
- writel(0x7fffffff, base + 0x80);
- writel(0x42005, base + 0x0);
- scu_busy_loop(base);
-
- iounmap(base);
-}
-
-static void mrst_hdmi_audio_enable(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
-
- HDMI_WRITE(HDMI_HCR, 0x67);
- HDMI_READ(HDMI_HCR);
-
- HDMI_WRITE(0x51a8, 0x10);
- HDMI_READ(0x51a8);
-
- HDMI_WRITE(HDMI_AUDIO_CTRL, 0x1);
- HDMI_READ(HDMI_AUDIO_CTRL);
-}
-
-static void mrst_hdmi_audio_disable(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
-
- HDMI_WRITE(0x51a8, 0x0);
- HDMI_READ(0x51a8);
-
- HDMI_WRITE(HDMI_AUDIO_CTRL, 0x0);
- HDMI_READ(HDMI_AUDIO_CTRL);
-
- HDMI_WRITE(HDMI_HCR, 0x47);
- HDMI_READ(HDMI_HCR);
-}
-
-void mrst_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode)
-{
- struct drm_device *dev = crtc->dev;
- u32 temp;
-
- switch (mode) {
- case DRM_MODE_DPMS_OFF:
- /* Disable VGACNTRL */
- REG_WRITE(VGACNTRL, 0x80000000);
-
- /* Disable plane */
- temp = REG_READ(DSPBCNTR);
- if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
- REG_WRITE(DSPBCNTR, temp & ~DISPLAY_PLANE_ENABLE);
- REG_READ(DSPBCNTR);
- /* Flush the plane changes */
- REG_WRITE(DSPBSURF, REG_READ(DSPBSURF));
- REG_READ(DSPBSURF);
- }
-
- /* Disable pipe B */
- temp = REG_READ(PIPEBCONF);
- if ((temp & PIPEACONF_ENABLE) != 0) {
- REG_WRITE(PIPEBCONF, temp & ~PIPEACONF_ENABLE);
- REG_READ(PIPEBCONF);
- }
-
- /* Disable LNW Pipes, etc */
- temp = REG_READ(PCH_PIPEBCONF);
- if ((temp & PIPEACONF_ENABLE) != 0) {
- REG_WRITE(PCH_PIPEBCONF, temp & ~PIPEACONF_ENABLE);
- REG_READ(PCH_PIPEBCONF);
- }
- /* wait for pipe off */
- udelay(150);
- /* Disable dpll */
- temp = REG_READ(DPLL_CTRL);
- if ((temp & DPLL_PWRDN) == 0) {
- REG_WRITE(DPLL_CTRL, temp | (DPLL_PWRDN | DPLL_RESET));
- REG_WRITE(DPLL_STATUS, 0x1);
- }
- /* wait for dpll off */
- udelay(150);
- break;
- case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- /* Enable dpll */
- temp = REG_READ(DPLL_CTRL);
- if ((temp & DPLL_PWRDN) != 0) {
- REG_WRITE(DPLL_CTRL, temp & ~(DPLL_PWRDN | DPLL_RESET));
- temp = REG_READ(DPLL_CLK_ENABLE);
- REG_WRITE(DPLL_CLK_ENABLE, temp | DPLL_EN_DISP | DPLL_SEL_HDMI | DPLL_EN_HDMI);
- REG_READ(DPLL_CLK_ENABLE);
- }
- /* wait for dpll warm up */
- udelay(150);
-
- /* Enable pipe B */
- temp = REG_READ(PIPEBCONF);
- if ((temp & PIPEACONF_ENABLE) == 0) {
- REG_WRITE(PIPEBCONF, temp | PIPEACONF_ENABLE);
- REG_READ(PIPEBCONF);
- }
-
- /* Enable LNW Pipe B */
- temp = REG_READ(PCH_PIPEBCONF);
- if ((temp & PIPEACONF_ENABLE) == 0) {
- REG_WRITE(PCH_PIPEBCONF, temp | PIPEACONF_ENABLE);
- REG_READ(PCH_PIPEBCONF);
- }
- wait_for_vblank(dev);
-
- /* Enable plane */
- temp = REG_READ(DSPBCNTR);
- if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
- REG_WRITE(DSPBCNTR, temp | DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(DSPBSURF, REG_READ(DSPBSURF));
- REG_READ(DSPBSURF);
- }
- psb_intel_crtc_load_lut(crtc);
- }
- /* DSPARB */
- REG_WRITE(DSPARB, 0x00003fbf);
- /* FW1 */
- REG_WRITE(0x70034, 0x3f880a0a);
- /* FW2 */
- REG_WRITE(0x70038, 0x0b060808);
- /* FW4 */
- REG_WRITE(0x70050, 0x08030404);
- /* FW5 */
- REG_WRITE(0x70054, 0x04040404);
- /* LNC Chicken Bits */
- REG_WRITE(0x70400, 0x4000);
-}
-
-
-static void mrst_hdmi_dpms(struct drm_encoder *encoder, int mode)
-{
- static int dpms_mode = -1;
-
- struct drm_device *dev = encoder->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
- u32 temp;
-
- if (dpms_mode == mode)
- return;
-
- if (mode != DRM_MODE_DPMS_ON)
- temp = 0x0;
- else
- temp = 0x99;
-
- dpms_mode = mode;
- HDMI_WRITE(HDMI_VIDEO_REG, temp);
-}
-
-static unsigned int htotal_calculate(struct drm_display_mode *mode)
-{
- u32 htotal, new_crtc_htotal;
-
- htotal = (mode->crtc_hdisplay - 1) | ((mode->crtc_htotal - 1) << 16);
-
- /*
- * 1024 x 768 new_crtc_htotal = 0x1024;
- * 1280 x 1024 new_crtc_htotal = 0x0c34;
- */
- new_crtc_htotal = (mode->crtc_htotal - 1) * 200 * 1000 / mode->clock;
-
- return (mode->crtc_hdisplay - 1) | (new_crtc_htotal << 16);
-}
-
-static void mrst_hdmi_find_dpll(struct drm_crtc *crtc, int target,
- int refclk, struct mrst_hdmi_clock *best_clock)
-{
- int np_min, np_max, nr_min, nr_max;
- int np, nr, nf;
-
- np_min = DIV_ROUND_UP(mrst_hdmi_limit.vco.min, target * 10);
- np_max = mrst_hdmi_limit.vco.max / (target * 10);
- if (np_min < mrst_hdmi_limit.np.min)
- np_min = mrst_hdmi_limit.np.min;
- if (np_max > mrst_hdmi_limit.np.max)
- np_max = mrst_hdmi_limit.np.max;
-
- nr_min = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_max));
- nr_max = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_min));
- if (nr_min < mrst_hdmi_limit.nr.min)
- nr_min = mrst_hdmi_limit.nr.min;
- if (nr_max > mrst_hdmi_limit.nr.max)
- nr_max = mrst_hdmi_limit.nr.max;
-
- np = DIV_ROUND_UP((refclk * 1000), (target * 10 * nr_max));
- nr = DIV_ROUND_UP((refclk * 1000), (target * 10 * np));
- nf = DIV_ROUND_CLOSEST((target * 10 * np * nr), refclk);
- DRM_DEBUG_KMS("np, nr, nf %d %d %d\n", np, nr, nf);
-
- /*
- * 1024 x 768 np = 1; nr = 0x26; nf = 0x0fd8000;
- * 1280 x 1024 np = 1; nr = 0x17; nf = 0x1034000;
- */
- best_clock->np = np;
- best_clock->nr = nr - 1;
- best_clock->nf = (nf << 14);
-}
-
-int mrst_crtc_hdmi_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
- int pipe = 1;
- int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
- int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
- int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
- int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
- int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
- int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
- int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
- int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
- int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
- int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
- int refclk;
- struct mrst_hdmi_clock clock;
- u32 dspcntr, pipeconf, dpll, temp;
- int dspcntr_reg = DSPBCNTR;
-
- /* Disable the VGA plane that we never use */
- REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
-
- /* XXX: Disable the panel fitter if it was on our pipe */
-
- /* Disable dpll if necessary */
- dpll = REG_READ(DPLL_CTRL);
- if ((dpll & DPLL_PWRDN) == 0) {
- REG_WRITE(DPLL_CTRL, dpll | (DPLL_PWRDN | DPLL_RESET));
- REG_WRITE(DPLL_DIV_CTRL, 0x00000000);
- REG_WRITE(DPLL_STATUS, 0x1);
- }
- udelay(150);
-
- /* reset controller: FIXME - can we sort out the ioremap mess ? */
- iounmap(hdmi_dev->regs);
- mrst_hdmi_reset(dev);
-
- /* program and enable dpll */
- refclk = 25000;
- mrst_hdmi_find_dpll(crtc, adjusted_mode->clock, refclk, &clock);
-
- /* Setting DPLL */
- dpll = REG_READ(DPLL_CTRL);
- dpll &= ~DPLL_PDIV_MASK;
- dpll &= ~(DPLL_PWRDN | DPLL_RESET);
- REG_WRITE(DPLL_CTRL, 0x00000008);
- REG_WRITE(DPLL_DIV_CTRL, ((clock.nf << 6) | clock.nr));
- REG_WRITE(DPLL_ADJUST, ((clock.nf >> 14) - 1));
- REG_WRITE(DPLL_CTRL, (dpll | (clock.np << DPLL_PDIV_SHIFT) | DPLL_ENSTAT | DPLL_DITHEN));
- REG_WRITE(DPLL_UPDATE, 0x80000000);
- REG_WRITE(DPLL_CLK_ENABLE, 0x80050102);
- udelay(150);
-
- hdmi_dev->regs = ioremap(hdmi_dev->mmio, hdmi_dev->mmio_len);
- if (hdmi_dev->regs == NULL) {
- DRM_ERROR("failed to do hdmi mmio mapping\n");
- return -ENOMEM;
- }
-
- /* configure HDMI */
- HDMI_WRITE(0x1004, 0x1fd);
- HDMI_WRITE(0x2000, 0x1);
- HDMI_WRITE(0x2008, 0x0);
- HDMI_WRITE(0x3130, 0x8);
- HDMI_WRITE(0x101c, 0x1800810);
-
- temp = htotal_calculate(adjusted_mode);
- REG_WRITE(htot_reg, temp);
- REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
- REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));
- REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16));
- REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16));
- REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));
- REG_WRITE(pipesrc_reg,
- ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1));
-
- REG_WRITE(PCH_HTOTAL_B, (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16));
- REG_WRITE(PCH_HBLANK_B, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
- REG_WRITE(PCH_HSYNC_B, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));
- REG_WRITE(PCH_VTOTAL_B, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16));
- REG_WRITE(PCH_VBLANK_B, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16));
- REG_WRITE(PCH_VSYNC_B, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));
- REG_WRITE(PCH_PIPEBSRC,
- ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1));
-
- temp = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start;
- HDMI_WRITE(HDMI_HBLANK_A, ((adjusted_mode->crtc_hdisplay - 1) << 16) | temp);
-
- REG_WRITE(dspsize_reg,
- ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
- REG_WRITE(dsppos_reg, 0);
-
- /* Flush the plane changes */
- {
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- crtc_funcs->mode_set_base(crtc, x, y, old_fb);
- }
-
- /* Set up the display plane register */
- dspcntr = REG_READ(dspcntr_reg);
- dspcntr |= DISPPLANE_GAMMA_ENABLE;
- dspcntr |= DISPPLANE_SEL_PIPE_B;
- dspcntr |= DISPLAY_PLANE_ENABLE;
-
- /* setup pipeconf */
- pipeconf = REG_READ(pipeconf_reg);
- pipeconf |= PIPEACONF_ENABLE;
-
- REG_WRITE(pipeconf_reg, pipeconf);
- REG_READ(pipeconf_reg);
-
- REG_WRITE(PCH_PIPEBCONF, pipeconf);
- REG_READ(PCH_PIPEBCONF);
- wait_for_vblank(dev);
-
- REG_WRITE(dspcntr_reg, dspcntr);
- wait_for_vblank(dev);
-
- return 0;
-}
-
-static int mrst_hdmi_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- if (mode->clock > 165000)
- return MODE_CLOCK_HIGH;
- if (mode->clock < 20000)
- return MODE_CLOCK_LOW;
-
- if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
- return MODE_NO_DBLESCAN;
-
- return MODE_OK;
-}
-
-static bool mrst_hdmi_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- return true;
-}
-
-static enum drm_connector_status
-mrst_hdmi_detect(struct drm_connector *connector, bool force)
-{
- enum drm_connector_status status;
- struct drm_device *dev = connector->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
- u32 temp;
-
- temp = HDMI_READ(HDMI_HSR);
- DRM_DEBUG_KMS("HDMI_HSR %x\n", temp);
-
- if ((temp & HDMI_DETECT_HDP) != 0)
- status = connector_status_connected;
- else
- status = connector_status_disconnected;
-
- return status;
-}
-
-static const unsigned char raw_edid[] = {
- 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x10, 0xac, 0x2f, 0xa0,
- 0x53, 0x55, 0x33, 0x30, 0x16, 0x13, 0x01, 0x03, 0x0e, 0x3a, 0x24, 0x78,
- 0xea, 0xe9, 0xf5, 0xac, 0x51, 0x30, 0xb4, 0x25, 0x11, 0x50, 0x54, 0xa5,
- 0x4b, 0x00, 0x81, 0x80, 0xa9, 0x40, 0x71, 0x4f, 0xb3, 0x00, 0x01, 0x01,
- 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x28, 0x3c, 0x80, 0xa0, 0x70, 0xb0,
- 0x23, 0x40, 0x30, 0x20, 0x36, 0x00, 0x46, 0x6c, 0x21, 0x00, 0x00, 0x1a,
- 0x00, 0x00, 0x00, 0xff, 0x00, 0x47, 0x4e, 0x37, 0x32, 0x31, 0x39, 0x35,
- 0x52, 0x30, 0x33, 0x55, 0x53, 0x0a, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x44,
- 0x45, 0x4c, 0x4c, 0x20, 0x32, 0x37, 0x30, 0x39, 0x57, 0x0a, 0x20, 0x20,
- 0x00, 0x00, 0x00, 0xfd, 0x00, 0x38, 0x4c, 0x1e, 0x53, 0x11, 0x00, 0x0a,
- 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x8d
-};
-
-static int mrst_hdmi_get_modes(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct i2c_adapter *i2c_adap;
- struct edid *edid;
- struct drm_display_mode *mode, *t;
- int i = 0, ret = 0;
-
- i2c_adap = i2c_get_adapter(3);
- if (i2c_adap == NULL) {
- DRM_ERROR("No ddc adapter available!\n");
- edid = (struct edid *)raw_edid;
- } else {
- edid = (struct edid *)raw_edid;
- /* FIXME ? edid = drm_get_edid(connector, i2c_adap); */
- }
-
- if (edid) {
- drm_mode_connector_update_edid_property(connector, edid);
- ret = drm_add_edid_modes(connector, edid);
- connector->display_info.raw_edid = NULL;
- }
-
- /*
- * prune modes that require frame buffer bigger than stolen mem
- */
- list_for_each_entry_safe(mode, t, &connector->probed_modes, head) {
- if ((mode->hdisplay * mode->vdisplay * 4) >= dev_priv->vram_stolen_size) {
- i++;
- drm_mode_remove(connector, mode);
- }
- }
- return ret - i;
-}
-
-static void mrst_hdmi_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
-
- mrst_hdmi_audio_enable(dev);
- return;
-}
-
-static void mrst_hdmi_destroy(struct drm_connector *connector)
-{
- return;
-}
-
-static const struct drm_encoder_helper_funcs mrst_hdmi_helper_funcs = {
- .dpms = mrst_hdmi_dpms,
- .mode_fixup = mrst_hdmi_mode_fixup,
- .prepare = psb_intel_encoder_prepare,
- .mode_set = mrst_hdmi_mode_set,
- .commit = psb_intel_encoder_commit,
-};
-
-static const struct drm_connector_helper_funcs
- mrst_hdmi_connector_helper_funcs = {
- .get_modes = mrst_hdmi_get_modes,
- .mode_valid = mrst_hdmi_mode_valid,
- .best_encoder = psb_intel_best_encoder,
-};
-
-static const struct drm_connector_funcs mrst_hdmi_connector_funcs = {
- .dpms = drm_helper_connector_dpms,
- .detect = mrst_hdmi_detect,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .destroy = mrst_hdmi_destroy,
-};
-
-static void mrst_hdmi_enc_destroy(struct drm_encoder *encoder)
-{
- drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs mrst_hdmi_enc_funcs = {
- .destroy = mrst_hdmi_enc_destroy,
-};
-
-void mrst_hdmi_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev)
-{
- struct psb_intel_output *psb_intel_output;
- struct drm_connector *connector;
- struct drm_encoder *encoder;
-
- psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
- if (!psb_intel_output)
- return;
-
- psb_intel_output->mode_dev = mode_dev;
- connector = &psb_intel_output->base;
- encoder = &psb_intel_output->enc;
- drm_connector_init(dev, &psb_intel_output->base,
- &mrst_hdmi_connector_funcs,
- DRM_MODE_CONNECTOR_DVID);
-
- drm_encoder_init(dev, &psb_intel_output->enc,
- &mrst_hdmi_enc_funcs,
- DRM_MODE_ENCODER_TMDS);
-
- drm_mode_connector_attach_encoder(&psb_intel_output->base,
- &psb_intel_output->enc);
-
- psb_intel_output->type = INTEL_OUTPUT_HDMI;
- drm_encoder_helper_add(encoder, &mrst_hdmi_helper_funcs);
- drm_connector_helper_add(connector, &mrst_hdmi_connector_helper_funcs);
-
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
- connector->interlace_allowed = false;
- connector->doublescan_allowed = false;
- drm_sysfs_connector_add(connector);
-
- return;
-}
-
-static DEFINE_PCI_DEVICE_TABLE(hdmi_ids) = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080d) },
- {}
-};
-
-void mrst_hdmi_setup(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct pci_dev *pdev;
- struct mrst_hdmi_dev *hdmi_dev;
- int ret;
-
- pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x080d, NULL);
- if (!pdev)
- return;
-
- hdmi_dev = kzalloc(sizeof(struct mrst_hdmi_dev), GFP_KERNEL);
- if (!hdmi_dev) {
- dev_err(dev->dev, "failed to allocate memory\n");
- goto out;
- }
-
-
- ret = pci_enable_device(pdev);
- if (ret) {
- dev_err(dev->dev, "failed to enable hdmi controller\n");
- goto free;
- }
-
- hdmi_dev->mmio = pci_resource_start(pdev, 0);
- hdmi_dev->mmio_len = pci_resource_len(pdev, 0);
- hdmi_dev->regs = ioremap(hdmi_dev->mmio, hdmi_dev->mmio_len);
- if (!hdmi_dev->regs) {
- dev_err(dev->dev, "failed to map hdmi mmio\n");
- goto free;
- }
-
- hdmi_dev->dev = pdev;
- pci_set_drvdata(pdev, hdmi_dev);
-
- /* Initialize i2c controller */
- ret = mrst_hdmi_i2c_init(hdmi_dev->dev);
- if (ret)
- dev_err(dev->dev, "HDMI I2C initialization failed\n");
-
- dev_priv->hdmi_priv = hdmi_dev;
- mrst_hdmi_audio_disable(dev);
- return;
-
-free:
- kfree(hdmi_dev);
-out:
- return;
-}
-
-void mrst_hdmi_teardown(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
- struct pci_dev *pdev;
-
- if (hdmi_dev) {
- pdev = hdmi_dev->dev;
- pci_set_drvdata(pdev, NULL);
- mrst_hdmi_i2c_exit(pdev);
- iounmap(hdmi_dev->regs);
- kfree(hdmi_dev);
- pci_dev_put(pdev);
- }
-}
-
-/* save HDMI register state */
-void mrst_hdmi_save(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
- int i;
-
- /* dpll */
- hdmi_dev->saveDPLL_CTRL = PSB_RVDC32(DPLL_CTRL);
- hdmi_dev->saveDPLL_DIV_CTRL = PSB_RVDC32(DPLL_DIV_CTRL);
- hdmi_dev->saveDPLL_ADJUST = PSB_RVDC32(DPLL_ADJUST);
- hdmi_dev->saveDPLL_UPDATE = PSB_RVDC32(DPLL_UPDATE);
- hdmi_dev->saveDPLL_CLK_ENABLE = PSB_RVDC32(DPLL_CLK_ENABLE);
-
- /* pipe B */
- dev_priv->savePIPEBCONF = PSB_RVDC32(PIPEBCONF);
- dev_priv->savePIPEBSRC = PSB_RVDC32(PIPEBSRC);
- dev_priv->saveHTOTAL_B = PSB_RVDC32(HTOTAL_B);
- dev_priv->saveHBLANK_B = PSB_RVDC32(HBLANK_B);
- dev_priv->saveHSYNC_B = PSB_RVDC32(HSYNC_B);
- dev_priv->saveVTOTAL_B = PSB_RVDC32(VTOTAL_B);
- dev_priv->saveVBLANK_B = PSB_RVDC32(VBLANK_B);
- dev_priv->saveVSYNC_B = PSB_RVDC32(VSYNC_B);
-
- hdmi_dev->savePCH_PIPEBCONF = PSB_RVDC32(PCH_PIPEBCONF);
- hdmi_dev->savePCH_PIPEBSRC = PSB_RVDC32(PCH_PIPEBSRC);
- hdmi_dev->savePCH_HTOTAL_B = PSB_RVDC32(PCH_HTOTAL_B);
- hdmi_dev->savePCH_HBLANK_B = PSB_RVDC32(PCH_HBLANK_B);
- hdmi_dev->savePCH_HSYNC_B = PSB_RVDC32(PCH_HSYNC_B);
- hdmi_dev->savePCH_VTOTAL_B = PSB_RVDC32(PCH_VTOTAL_B);
- hdmi_dev->savePCH_VBLANK_B = PSB_RVDC32(PCH_VBLANK_B);
- hdmi_dev->savePCH_VSYNC_B = PSB_RVDC32(PCH_VSYNC_B);
-
- /* plane */
- dev_priv->saveDSPBCNTR = PSB_RVDC32(DSPBCNTR);
- dev_priv->saveDSPBSTRIDE = PSB_RVDC32(DSPBSTRIDE);
- dev_priv->saveDSPBADDR = PSB_RVDC32(DSPBBASE);
- dev_priv->saveDSPBSURF = PSB_RVDC32(DSPBSURF);
- dev_priv->saveDSPBLINOFF = PSB_RVDC32(DSPBLINOFF);
- dev_priv->saveDSPBTILEOFF = PSB_RVDC32(DSPBTILEOFF);
-
- /* cursor B */
- dev_priv->saveDSPBCURSOR_CTRL = PSB_RVDC32(CURBCNTR);
- dev_priv->saveDSPBCURSOR_BASE = PSB_RVDC32(CURBBASE);
- dev_priv->saveDSPBCURSOR_POS = PSB_RVDC32(CURBPOS);
-
- /* save palette */
- for (i = 0; i < 256; i++)
- dev_priv->save_palette_b[i] = PSB_RVDC32(PALETTE_B + (i << 2));
-}
-
-/* restore HDMI register state */
-void mrst_hdmi_restore(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
- int i;
-
- /* dpll */
- PSB_WVDC32(hdmi_dev->saveDPLL_CTRL, DPLL_CTRL);
- PSB_WVDC32(hdmi_dev->saveDPLL_DIV_CTRL, DPLL_DIV_CTRL);
- PSB_WVDC32(hdmi_dev->saveDPLL_ADJUST, DPLL_ADJUST);
- PSB_WVDC32(hdmi_dev->saveDPLL_UPDATE, DPLL_UPDATE);
- PSB_WVDC32(hdmi_dev->saveDPLL_CLK_ENABLE, DPLL_CLK_ENABLE);
- DRM_UDELAY(150);
-
- /* pipe */
- PSB_WVDC32(dev_priv->savePIPEBSRC, PIPEBSRC);
- PSB_WVDC32(dev_priv->saveHTOTAL_B, HTOTAL_B);
- PSB_WVDC32(dev_priv->saveHBLANK_B, HBLANK_B);
- PSB_WVDC32(dev_priv->saveHSYNC_B, HSYNC_B);
- PSB_WVDC32(dev_priv->saveVTOTAL_B, VTOTAL_B);
- PSB_WVDC32(dev_priv->saveVBLANK_B, VBLANK_B);
- PSB_WVDC32(dev_priv->saveVSYNC_B, VSYNC_B);
-
- PSB_WVDC32(hdmi_dev->savePCH_PIPEBSRC, PCH_PIPEBSRC);
- PSB_WVDC32(hdmi_dev->savePCH_HTOTAL_B, PCH_HTOTAL_B);
- PSB_WVDC32(hdmi_dev->savePCH_HBLANK_B, PCH_HBLANK_B);
- PSB_WVDC32(hdmi_dev->savePCH_HSYNC_B, PCH_HSYNC_B);
- PSB_WVDC32(hdmi_dev->savePCH_VTOTAL_B, PCH_VTOTAL_B);
- PSB_WVDC32(hdmi_dev->savePCH_VBLANK_B, PCH_VBLANK_B);
- PSB_WVDC32(hdmi_dev->savePCH_VSYNC_B, PCH_VSYNC_B);
-
- PSB_WVDC32(dev_priv->savePIPEBCONF, PIPEBCONF);
- PSB_WVDC32(hdmi_dev->savePCH_PIPEBCONF, PCH_PIPEBCONF);
-
- /* plane */
- PSB_WVDC32(dev_priv->saveDSPBLINOFF, DSPBLINOFF);
- PSB_WVDC32(dev_priv->saveDSPBSTRIDE, DSPBSTRIDE);
- PSB_WVDC32(dev_priv->saveDSPBTILEOFF, DSPBTILEOFF);
- PSB_WVDC32(dev_priv->saveDSPBCNTR, DSPBCNTR);
- PSB_WVDC32(dev_priv->saveDSPBSURF, DSPBSURF);
-
- /* cursor B */
- PSB_WVDC32(dev_priv->saveDSPBCURSOR_CTRL, CURBCNTR);
- PSB_WVDC32(dev_priv->saveDSPBCURSOR_POS, CURBPOS);
- PSB_WVDC32(dev_priv->saveDSPBCURSOR_BASE, CURBBASE);
-
- /* restore palette */
- for (i = 0; i < 256; i++)
- PSB_WVDC32(dev_priv->save_palette_b[i], PALETTE_B + (i << 2));
-}
+++ /dev/null
-/*
- * Copyright © 2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Li Peng <peng.li@intel.com>
- */
-
-#include <linux/mutex.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include "psb_drv.h"
-
-#define HDMI_READ(reg) readl(hdmi_dev->regs + (reg))
-#define HDMI_WRITE(reg, val) writel(val, hdmi_dev->regs + (reg))
-
-#define HDMI_HCR 0x1000
-#define HCR_DETECT_HDP (1 << 6)
-#define HCR_ENABLE_HDCP (1 << 5)
-#define HCR_ENABLE_AUDIO (1 << 2)
-#define HCR_ENABLE_PIXEL (1 << 1)
-#define HCR_ENABLE_TMDS (1 << 0)
-#define HDMI_HICR 0x1004
-#define HDMI_INTR_I2C_ERROR (1 << 4)
-#define HDMI_INTR_I2C_FULL (1 << 3)
-#define HDMI_INTR_I2C_DONE (1 << 2)
-#define HDMI_INTR_HPD (1 << 0)
-#define HDMI_HSR 0x1008
-#define HDMI_HISR 0x100C
-#define HDMI_HI2CRDB0 0x1200
-#define HDMI_HI2CHCR 0x1240
-#define HI2C_HDCP_WRITE (0 << 2)
-#define HI2C_HDCP_RI_READ (1 << 2)
-#define HI2C_HDCP_READ (2 << 2)
-#define HI2C_EDID_READ (3 << 2)
-#define HI2C_READ_CONTINUE (1 << 1)
-#define HI2C_ENABLE_TRANSACTION (1 << 0)
-
-#define HDMI_ICRH 0x1100
-#define HDMI_HI2CTDR0 0x1244
-#define HDMI_HI2CTDR1 0x1248
-
-#define I2C_STAT_INIT 0
-#define I2C_READ_DONE 1
-#define I2C_TRANSACTION_DONE 2
-
-struct hdmi_i2c_dev {
- struct i2c_adapter *adap;
- struct mutex i2c_lock;
- struct completion complete;
- int status;
- struct i2c_msg *msg;
- int buf_offset;
-};
-
-static void hdmi_i2c_irq_enable(struct mrst_hdmi_dev *hdmi_dev)
-{
- u32 temp;
-
- temp = HDMI_READ(HDMI_HICR);
- temp |= (HDMI_INTR_I2C_ERROR | HDMI_INTR_I2C_FULL | HDMI_INTR_I2C_DONE);
- HDMI_WRITE(HDMI_HICR, temp);
- HDMI_READ(HDMI_HICR);
-}
-
-static void hdmi_i2c_irq_disable(struct mrst_hdmi_dev *hdmi_dev)
-{
- HDMI_WRITE(HDMI_HICR, 0x0);
- HDMI_READ(HDMI_HICR);
-}
-
-static int xfer_read(struct i2c_adapter *adap, struct i2c_msg *pmsg)
-{
- struct mrst_hdmi_dev *hdmi_dev = i2c_get_adapdata(adap);
- struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev;
- u32 temp;
-
- i2c_dev->status = I2C_STAT_INIT;
- i2c_dev->msg = pmsg;
- i2c_dev->buf_offset = 0;
- INIT_COMPLETION(i2c_dev->complete);
-
- /* Enable I2C transaction */
- temp = ((pmsg->len) << 20) | HI2C_EDID_READ | HI2C_ENABLE_TRANSACTION;
- HDMI_WRITE(HDMI_HI2CHCR, temp);
- HDMI_READ(HDMI_HI2CHCR);
-
- while (i2c_dev->status != I2C_TRANSACTION_DONE)
- wait_for_completion_interruptible_timeout(&i2c_dev->complete,
- 10 * HZ);
-
- return 0;
-}
-
-static int xfer_write(struct i2c_adapter *adap, struct i2c_msg *pmsg)
-{
- /*
- * XXX: i2c write seems isn't useful for EDID probe, don't do anything
- */
- return 0;
-}
-
-static int mrst_hdmi_i2c_access(struct i2c_adapter *adap,
- struct i2c_msg *pmsg,
- int num)
-{
- struct mrst_hdmi_dev *hdmi_dev = i2c_get_adapdata(adap);
- struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev;
- int i, err = 0;
-
- mutex_lock(&i2c_dev->i2c_lock);
-
- /* Enable i2c unit */
- HDMI_WRITE(HDMI_ICRH, 0x00008760);
-
- /* Enable irq */
- hdmi_i2c_irq_enable(hdmi_dev);
- for (i = 0; i < num; i++) {
- if (pmsg->len && pmsg->buf) {
- if (pmsg->flags & I2C_M_RD)
- err = xfer_read(adap, pmsg);
- else
- err = xfer_write(adap, pmsg);
- }
- pmsg++; /* next message */
- }
-
- /* Disable irq */
- hdmi_i2c_irq_disable(hdmi_dev);
-
- mutex_unlock(&i2c_dev->i2c_lock);
-
- return i;
-}
-
-static u32 mrst_hdmi_i2c_func(struct i2c_adapter *adapter)
-{
- return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR;
-}
-
-static const struct i2c_algorithm mrst_hdmi_i2c_algorithm = {
- .master_xfer = mrst_hdmi_i2c_access,
- .functionality = mrst_hdmi_i2c_func,
-};
-
-static struct i2c_adapter mrst_hdmi_i2c_adapter = {
- .name = "mrst_hdmi_i2c",
- .nr = 3,
- .owner = THIS_MODULE,
- .class = I2C_CLASS_DDC,
- .algo = &mrst_hdmi_i2c_algorithm,
-};
-
-static void hdmi_i2c_read(struct mrst_hdmi_dev *hdmi_dev)
-{
- struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev;
- struct i2c_msg *msg = i2c_dev->msg;
- u8 *buf = msg->buf;
- u32 temp;
- int i, offset;
-
- offset = i2c_dev->buf_offset;
- for (i = 0; i < 0x10; i++) {
- temp = HDMI_READ(HDMI_HI2CRDB0 + (i * 4));
- memcpy(buf + (offset + i * 4), &temp, 4);
- }
- i2c_dev->buf_offset += (0x10 * 4);
-
- /* clearing read buffer full intr */
- temp = HDMI_READ(HDMI_HISR);
- HDMI_WRITE(HDMI_HISR, temp | HDMI_INTR_I2C_FULL);
- HDMI_READ(HDMI_HISR);
-
- /* continue read transaction */
- temp = HDMI_READ(HDMI_HI2CHCR);
- HDMI_WRITE(HDMI_HI2CHCR, temp | HI2C_READ_CONTINUE);
- HDMI_READ(HDMI_HI2CHCR);
-
- i2c_dev->status = I2C_READ_DONE;
- return;
-}
-
-static void hdmi_i2c_transaction_done(struct mrst_hdmi_dev *hdmi_dev)
-{
- struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev;
- u32 temp;
-
- /* clear transaction done intr */
- temp = HDMI_READ(HDMI_HISR);
- HDMI_WRITE(HDMI_HISR, temp | HDMI_INTR_I2C_DONE);
- HDMI_READ(HDMI_HISR);
-
-
- temp = HDMI_READ(HDMI_HI2CHCR);
- HDMI_WRITE(HDMI_HI2CHCR, temp & ~HI2C_ENABLE_TRANSACTION);
- HDMI_READ(HDMI_HI2CHCR);
-
- i2c_dev->status = I2C_TRANSACTION_DONE;
- return;
-}
-
-static irqreturn_t mrst_hdmi_i2c_handler(int this_irq, void *dev)
-{
- struct mrst_hdmi_dev *hdmi_dev = dev;
- struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev;
- u32 stat;
-
- stat = HDMI_READ(HDMI_HISR);
-
- if (stat & HDMI_INTR_HPD) {
- HDMI_WRITE(HDMI_HISR, stat | HDMI_INTR_HPD);
- HDMI_READ(HDMI_HISR);
- }
-
- if (stat & HDMI_INTR_I2C_FULL)
- hdmi_i2c_read(hdmi_dev);
-
- if (stat & HDMI_INTR_I2C_DONE)
- hdmi_i2c_transaction_done(hdmi_dev);
-
- complete(&i2c_dev->complete);
-
- return IRQ_HANDLED;
-}
-
-/*
- * choose alternate function 2 of GPIO pin 52, 53,
- * which is used by HDMI I2C logic
- */
-static void mrst_hdmi_i2c_gpio_fix(void)
-{
- void *base;
- unsigned int gpio_base = 0xff12c000;
- int gpio_len = 0x1000;
- u32 temp;
-
- base = ioremap((resource_size_t)gpio_base, gpio_len);
- if (base == NULL) {
- DRM_ERROR("gpio ioremap fail\n");
- return;
- }
-
- temp = readl(base + 0x44);
- DRM_DEBUG_DRIVER("old gpio val %x\n", temp);
- writel((temp | 0x00000a00), (base + 0x44));
- temp = readl(base + 0x44);
- DRM_DEBUG_DRIVER("new gpio val %x\n", temp);
-
- iounmap(base);
-}
-
-int mrst_hdmi_i2c_init(struct pci_dev *dev)
-{
- struct mrst_hdmi_dev *hdmi_dev;
- struct hdmi_i2c_dev *i2c_dev;
- int ret;
-
- hdmi_dev = pci_get_drvdata(dev);
-
- i2c_dev = kzalloc(sizeof(struct hdmi_i2c_dev), GFP_KERNEL);
- if (i2c_dev == NULL) {
- DRM_ERROR("Can't allocate interface\n");
- ret = -ENOMEM;
- goto exit;
- }
-
- i2c_dev->adap = &mrst_hdmi_i2c_adapter;
- i2c_dev->status = I2C_STAT_INIT;
- init_completion(&i2c_dev->complete);
- mutex_init(&i2c_dev->i2c_lock);
- i2c_set_adapdata(&mrst_hdmi_i2c_adapter, hdmi_dev);
- hdmi_dev->i2c_dev = i2c_dev;
-
- /* Enable HDMI I2C function on gpio */
- mrst_hdmi_i2c_gpio_fix();
-
- /* request irq */
- ret = request_irq(dev->irq, mrst_hdmi_i2c_handler, IRQF_SHARED,
- mrst_hdmi_i2c_adapter.name, hdmi_dev);
- if (ret) {
- DRM_ERROR("Failed to request IRQ for I2C controller\n");
- goto err;
- }
-
- /* Adapter registration */
- ret = i2c_add_numbered_adapter(&mrst_hdmi_i2c_adapter);
- return ret;
-
-err:
- kfree(i2c_dev);
-exit:
- return ret;
-}
-
-void mrst_hdmi_i2c_exit(struct pci_dev *dev)
-{
- struct mrst_hdmi_dev *hdmi_dev;
- struct hdmi_i2c_dev *i2c_dev;
-
- hdmi_dev = pci_get_drvdata(dev);
- if (i2c_del_adapter(&mrst_hdmi_i2c_adapter))
- DRM_DEBUG_DRIVER("Failed to delete hdmi-i2c adapter\n");
-
- i2c_dev = hdmi_dev->i2c_dev;
- kfree(i2c_dev);
- free_irq(dev->irq, hdmi_dev);
-}
+++ /dev/null
-/*
- * Copyright © 2006-2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- * Dave Airlie <airlied@linux.ie>
- * Jesse Barnes <jesse.barnes@intel.com>
- */
-
-#include <linux/i2c.h>
-#include <drm/drmP.h>
-#include <asm/mrst.h>
-
-#include "intel_bios.h"
-#include "psb_drv.h"
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "power.h"
-#include <linux/pm_runtime.h>
-
-/* The max/min PWM frequency in BPCR[31:17] - */
-/* The smallest number is 1 (not 0) that can fit in the
- * 15-bit field of the and then*/
-/* shifts to the left by one bit to get the actual 16-bit
- * value that the 15-bits correspond to.*/
-#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF
-#define BRIGHTNESS_MAX_LEVEL 100
-
-/**
- * Sets the power state for the panel.
- */
-static void mrst_lvds_set_power(struct drm_device *dev,
- struct psb_intel_output *output, bool on)
-{
- u32 pp_status;
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (!gma_power_begin(dev, true))
- return;
-
- if (on) {
- REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
- POWER_TARGET_ON);
- do {
- pp_status = REG_READ(PP_STATUS);
- } while ((pp_status & (PP_ON | PP_READY)) == PP_READY);
- dev_priv->is_lvds_on = true;
- if (dev_priv->ops->lvds_bl_power)
- dev_priv->ops->lvds_bl_power(dev, true);
- } else {
- if (dev_priv->ops->lvds_bl_power)
- dev_priv->ops->lvds_bl_power(dev, false);
- REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
- ~POWER_TARGET_ON);
- do {
- pp_status = REG_READ(PP_STATUS);
- } while (pp_status & PP_ON);
- dev_priv->is_lvds_on = false;
- pm_request_idle(&dev->pdev->dev);
- }
- gma_power_end(dev);
-}
-
-static void mrst_lvds_dpms(struct drm_encoder *encoder, int mode)
-{
- struct drm_device *dev = encoder->dev;
- struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
-
- if (mode == DRM_MODE_DPMS_ON)
- mrst_lvds_set_power(dev, output, true);
- else
- mrst_lvds_set_power(dev, output, false);
-
- /* XXX: We never power down the LVDS pairs. */
-}
-
-static void mrst_lvds_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct psb_intel_mode_device *mode_dev =
- enc_to_psb_intel_output(encoder)->mode_dev;
- struct drm_device *dev = encoder->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 lvds_port;
- uint64_t v = DRM_MODE_SCALE_FULLSCREEN;
-
- if (!gma_power_begin(dev, true))
- return;
-
- /*
- * The LVDS pin pair will already have been turned on in the
- * psb_intel_crtc_mode_set since it has a large impact on the DPLL
- * settings.
- */
- lvds_port = (REG_READ(LVDS) &
- (~LVDS_PIPEB_SELECT)) |
- LVDS_PORT_EN |
- LVDS_BORDER_EN;
-
- /* If the firmware says dither on Moorestown, or the BIOS does
- on Oaktrail then enable dithering */
- if (mode_dev->panel_wants_dither || dev_priv->lvds_dither)
- lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE;
-
- REG_WRITE(LVDS, lvds_port);
-
- drm_connector_property_get_value(
- &enc_to_psb_intel_output(encoder)->base,
- dev->mode_config.scaling_mode_property,
- &v);
-
- if (v == DRM_MODE_SCALE_NO_SCALE)
- REG_WRITE(PFIT_CONTROL, 0);
- else if (v == DRM_MODE_SCALE_ASPECT) {
- if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) ||
- (mode->hdisplay != adjusted_mode->crtc_hdisplay)) {
- if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) ==
- (mode->hdisplay * adjusted_mode->crtc_vdisplay))
- REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
- else if ((adjusted_mode->crtc_hdisplay *
- mode->vdisplay) > (mode->hdisplay *
- adjusted_mode->crtc_vdisplay))
- REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
- PFIT_SCALING_MODE_PILLARBOX);
- else
- REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
- PFIT_SCALING_MODE_LETTERBOX);
- } else
- REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
- } else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/
- REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
-
- gma_power_end(dev);
-}
-
-static void mrst_lvds_prepare(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
- struct psb_intel_mode_device *mode_dev = output->mode_dev;
-
- if (!gma_power_begin(dev, true))
- return;
-
- mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
- mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
- BACKLIGHT_DUTY_CYCLE_MASK);
- mrst_lvds_set_power(dev, output, false);
- gma_power_end(dev);
-}
-
-static u32 mrst_lvds_get_max_backlight(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 ret;
-
- if (gma_power_begin(dev, false)) {
- ret = ((REG_READ(BLC_PWM_CTL) &
- BACKLIGHT_MODULATION_FREQ_MASK) >>
- BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
-
- gma_power_end(dev);
- } else
- ret = ((dev_priv->saveBLC_PWM_CTL &
- BACKLIGHT_MODULATION_FREQ_MASK) >>
- BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
-
- return ret;
-}
-
-static void mrst_lvds_commit(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
- struct psb_intel_mode_device *mode_dev = output->mode_dev;
-
- if (mode_dev->backlight_duty_cycle == 0)
- mode_dev->backlight_duty_cycle =
- mrst_lvds_get_max_backlight(dev);
- mrst_lvds_set_power(dev, output, true);
-}
-
-static const struct drm_encoder_helper_funcs mrst_lvds_helper_funcs = {
- .dpms = mrst_lvds_dpms,
- .mode_fixup = psb_intel_lvds_mode_fixup,
- .prepare = mrst_lvds_prepare,
- .mode_set = mrst_lvds_mode_set,
- .commit = mrst_lvds_commit,
-};
-
-static struct drm_display_mode lvds_configuration_modes[] = {
- /* hard coded fixed mode for TPO LTPS LPJ040K001A */
- { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 33264, 800, 836,
- 846, 1056, 0, 480, 489, 491, 525, 0, 0) },
- /* hard coded fixed mode for LVDS 800x480 */
- { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 30994, 800, 801,
- 802, 1024, 0, 480, 481, 482, 525, 0, 0) },
- /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */
- { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1072,
- 1104, 1184, 0, 600, 603, 604, 608, 0, 0) },
- /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */
- { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1104,
- 1136, 1184, 0, 600, 603, 604, 608, 0, 0) },
- /* hard coded fixed mode for Sharp wsvga LVDS 1024x600 */
- { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 48885, 1024, 1124,
- 1204, 1312, 0, 600, 607, 610, 621, 0, 0) },
- /* hard coded fixed mode for LVDS 1024x768 */
- { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
- 1184, 1344, 0, 768, 771, 777, 806, 0, 0) },
- /* hard coded fixed mode for LVDS 1366x768 */
- { DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 77500, 1366, 1430,
- 1558, 1664, 0, 768, 769, 770, 776, 0, 0) },
-};
-
-/* Returns the panel fixed mode from configuration. */
-
-static struct drm_display_mode *
-mrst_lvds_get_configuration_mode(struct drm_device *dev)
-{
- struct drm_display_mode *mode = NULL;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mrst_timing_info *ti = &dev_priv->gct_data.DTD;
-
- if (dev_priv->vbt_data.size != 0x00) { /*if non-zero, then use vbt*/
- mode = kzalloc(sizeof(*mode), GFP_KERNEL);
- if (!mode)
- return NULL;
-
- mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
- mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
- mode->hsync_start = mode->hdisplay + \
- ((ti->hsync_offset_hi << 8) | \
- ti->hsync_offset_lo);
- mode->hsync_end = mode->hsync_start + \
- ((ti->hsync_pulse_width_hi << 8) | \
- ti->hsync_pulse_width_lo);
- mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \
- ti->hblank_lo);
- mode->vsync_start = \
- mode->vdisplay + ((ti->vsync_offset_hi << 4) | \
- ti->vsync_offset_lo);
- mode->vsync_end = \
- mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \
- ti->vsync_pulse_width_lo);
- mode->vtotal = mode->vdisplay + \
- ((ti->vblank_hi << 8) | ti->vblank_lo);
- mode->clock = ti->pixel_clock * 10;
-#if 0
- printk(KERN_INFO "hdisplay is %d\n", mode->hdisplay);
- printk(KERN_INFO "vdisplay is %d\n", mode->vdisplay);
- printk(KERN_INFO "HSS is %d\n", mode->hsync_start);
- printk(KERN_INFO "HSE is %d\n", mode->hsync_end);
- printk(KERN_INFO "htotal is %d\n", mode->htotal);
- printk(KERN_INFO "VSS is %d\n", mode->vsync_start);
- printk(KERN_INFO "VSE is %d\n", mode->vsync_end);
- printk(KERN_INFO "vtotal is %d\n", mode->vtotal);
- printk(KERN_INFO "clock is %d\n", mode->clock);
-#endif
- } else
- mode = drm_mode_duplicate(dev, &lvds_configuration_modes[2]);
-
- drm_mode_set_name(mode);
- drm_mode_set_crtcinfo(mode, 0);
-
- return mode;
-}
-
-/**
- * mrst_lvds_init - setup LVDS connectors on this device
- * @dev: drm device
- *
- * Create the connector, register the LVDS DDC bus, and try to figure out what
- * modes we can display on the LVDS panel (if present).
- */
-void mrst_lvds_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev)
-{
- struct psb_intel_output *psb_intel_output;
- struct drm_connector *connector;
- struct drm_encoder *encoder;
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *) dev->dev_private;
- struct edid *edid;
- int ret = 0;
- struct i2c_adapter *i2c_adap;
- struct drm_display_mode *scan; /* *modes, *bios_mode; */
-
- psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
- if (!psb_intel_output)
- return;
-
- psb_intel_output->mode_dev = mode_dev;
- connector = &psb_intel_output->base;
- encoder = &psb_intel_output->enc;
- dev_priv->is_lvds_on = true;
- drm_connector_init(dev, &psb_intel_output->base,
- &psb_intel_lvds_connector_funcs,
- DRM_MODE_CONNECTOR_LVDS);
-
- drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs,
- DRM_MODE_ENCODER_LVDS);
-
- drm_mode_connector_attach_encoder(&psb_intel_output->base,
- &psb_intel_output->enc);
- psb_intel_output->type = INTEL_OUTPUT_LVDS;
-
- drm_encoder_helper_add(encoder, &mrst_lvds_helper_funcs);
- drm_connector_helper_add(connector,
- &psb_intel_lvds_connector_helper_funcs);
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
- connector->interlace_allowed = false;
- connector->doublescan_allowed = false;
-
- drm_connector_attach_property(connector,
- dev->mode_config.scaling_mode_property,
- DRM_MODE_SCALE_FULLSCREEN);
- drm_connector_attach_property(connector,
- dev_priv->backlight_property,
- BRIGHTNESS_MAX_LEVEL);
-
- mode_dev->panel_wants_dither = false;
- if (dev_priv->vbt_data.size != 0x00)
- mode_dev->panel_wants_dither = (dev_priv->gct_data.
- Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE);
-
- /*
- * LVDS discovery:
- * 1) check for EDID on DDC
- * 2) check for VBT data
- * 3) check to see if LVDS is already on
- * if none of the above, no panel
- * 4) make sure lid is open
- * if closed, act like it's not there for now
- */
-
- i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus);
-
- if (i2c_adap == NULL)
- dev_err(dev->dev, "No ddc adapter available!\n");
- /*
- * Attempt to get the fixed panel mode from DDC. Assume that the
- * preferred mode is the right one.
- */
- if (i2c_adap) {
- edid = drm_get_edid(connector, i2c_adap);
- if (edid) {
- drm_mode_connector_update_edid_property(connector,
- edid);
- ret = drm_add_edid_modes(connector, edid);
- kfree(edid);
- }
-
- list_for_each_entry(scan, &connector->probed_modes, head) {
- if (scan->type & DRM_MODE_TYPE_PREFERRED) {
- mode_dev->panel_fixed_mode =
- drm_mode_duplicate(dev, scan);
- goto out; /* FIXME: check for quirks */
- }
- }
- }
- /*
- * If we didn't get EDID, try geting panel timing
- * from configuration data
- */
- mode_dev->panel_fixed_mode = mrst_lvds_get_configuration_mode(dev);
-
- if (mode_dev->panel_fixed_mode) {
- mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
- goto out; /* FIXME: check for quirks */
- }
-
- /* If we still don't have a mode after all that, give up. */
- if (!mode_dev->panel_fixed_mode) {
- dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
- goto failed_find;
- }
-
-out:
- drm_sysfs_connector_add(connector);
- return;
-
-failed_find:
- dev_dbg(dev->dev, "No LVDS modes found, disabling.\n");
- if (psb_intel_output->ddc_bus)
- psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
-
-/* failed_ddc: */
-
- drm_encoder_cleanup(encoder);
- drm_connector_cleanup(connector);
- kfree(connector);
-}
-
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2009-2011, Intel Corporation.
- * All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- * Authors:
- * Benjamin Defnet <benjamin.r.defnet@intel.com>
- * Rajesh Poornachandran <rajesh.poornachandran@intel.com>
- * Massively reworked
- * Alan Cox <alan@linux.intel.com>
- */
-
-#include "power.h"
-#include "psb_drv.h"
-#include "psb_reg.h"
-#include "psb_intel_reg.h"
-#include <linux/mutex.h>
-#include <linux/pm_runtime.h>
-
-static struct mutex power_mutex; /* Serialize power ops */
-static spinlock_t power_ctrl_lock; /* Serialize power claim */
-
-/**
- * gma_power_init - initialise power manager
- * @dev: our device
- *
- * Set up for power management tracking of our hardware.
- */
-void gma_power_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- /* FIXME: Move APM/OSPM base into relevant device code */
- dev_priv->apm_base = dev_priv->apm_reg & 0xffff;
- dev_priv->ospm_base &= 0xffff;
-
- dev_priv->display_power = true; /* We start active */
- dev_priv->display_count = 0; /* Currently no users */
- dev_priv->suspended = false; /* And not suspended */
- spin_lock_init(&power_ctrl_lock);
- mutex_init(&power_mutex);
-
- dev_priv->ops->init_pm(dev);
-}
-
-/**
- * gma_power_uninit - end power manager
- * @dev: device to end for
- *
- * Undo the effects of gma_power_init
- */
-void gma_power_uninit(struct drm_device *dev)
-{
- pm_runtime_disable(&dev->pdev->dev);
- pm_runtime_set_suspended(&dev->pdev->dev);
-}
-
-/**
- * gma_suspend_display - suspend the display logic
- * @dev: our DRM device
- *
- * Suspend the display logic of the graphics interface
- */
-static void gma_suspend_display(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (!dev_priv->display_power)
- return;
- dev_priv->ops->save_regs(dev);
- dev_priv->ops->power_down(dev);
- dev_priv->display_power = false;
-}
-
-/**
- * gma_resume_display - resume display side logic
- *
- * Resume the display hardware restoring state and enabling
- * as necessary.
- */
-static void gma_resume_display(struct pci_dev *pdev)
-{
- struct drm_device *dev = pci_get_drvdata(pdev);
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (dev_priv->display_power)
- return;
-
- /* turn on the display power island */
- dev_priv->ops->power_up(dev);
- dev_priv->suspended = false;
- dev_priv->display_power = true;
-
- PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL);
- pci_write_config_word(pdev, PSB_GMCH_CTRL,
- dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED);
- dev_priv->ops->restore_regs(dev);
-}
-
-/**
- * gma_suspend_pci - suspend PCI side
- * @pdev: PCI device
- *
- * Perform the suspend processing on our PCI device state
- */
-static void gma_suspend_pci(struct pci_dev *pdev)
-{
- struct drm_device *dev = pci_get_drvdata(pdev);
- struct drm_psb_private *dev_priv = dev->dev_private;
- int bsm, vbt;
-
- if (dev_priv->suspended)
- return;
-
- pci_save_state(pdev);
- pci_read_config_dword(pdev, 0x5C, &bsm);
- dev_priv->saveBSM = bsm;
- pci_read_config_dword(pdev, 0xFC, &vbt);
- dev_priv->saveVBT = vbt;
- pci_read_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, &dev_priv->msi_addr);
- pci_read_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, &dev_priv->msi_data);
-
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
- dev_priv->suspended = true;
-}
-
-/**
- * gma_resume_pci - resume helper
- * @dev: our PCI device
- *
- * Perform the resume processing on our PCI device state - rewrite
- * register state and re-enable the PCI device
- */
-static bool gma_resume_pci(struct pci_dev *pdev)
-{
- struct drm_device *dev = pci_get_drvdata(pdev);
- struct drm_psb_private *dev_priv = dev->dev_private;
- int ret;
-
- if (!dev_priv->suspended)
- return true;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- pci_write_config_dword(pdev, 0x5c, dev_priv->saveBSM);
- pci_write_config_dword(pdev, 0xFC, dev_priv->saveVBT);
- /* restoring MSI address and data in PCIx space */
- pci_write_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, dev_priv->msi_addr);
- pci_write_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, dev_priv->msi_data);
- ret = pci_enable_device(pdev);
-
- if (ret != 0)
- dev_err(&pdev->dev, "pci_enable failed: %d\n", ret);
- else
- dev_priv->suspended = false;
- return !dev_priv->suspended;
-}
-
-/**
- * gma_power_suspend - bus callback for suspend
- * @pdev: our PCI device
- * @state: suspend type
- *
- * Called back by the PCI layer during a suspend of the system. We
- * perform the necessary shut down steps and save enough state that
- * we can undo this when resume is called.
- */
-int gma_power_suspend(struct device *_dev)
-{
- struct pci_dev *pdev = container_of(_dev, struct pci_dev, dev);
- struct drm_device *dev = pci_get_drvdata(pdev);
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- mutex_lock(&power_mutex);
- if (!dev_priv->suspended) {
- if (dev_priv->display_count) {
- mutex_unlock(&power_mutex);
- return -EBUSY;
- }
- psb_irq_uninstall(dev);
- gma_suspend_display(dev);
- gma_suspend_pci(pdev);
- }
- mutex_unlock(&power_mutex);
- return 0;
-}
-
-/**
- * gma_power_resume - resume power
- * @pdev: PCI device
- *
- * Resume the PCI side of the graphics and then the displays
- */
-int gma_power_resume(struct device *_dev)
-{
- struct pci_dev *pdev = container_of(_dev, struct pci_dev, dev);
- struct drm_device *dev = pci_get_drvdata(pdev);
-
- mutex_lock(&power_mutex);
- gma_resume_pci(pdev);
- gma_resume_display(pdev);
- psb_irq_preinstall(dev);
- psb_irq_postinstall(dev);
- mutex_unlock(&power_mutex);
- return 0;
-}
-
-/**
- * gma_power_is_on - returne true if power is on
- * @dev: our DRM device
- *
- * Returns true if the display island power is on at this moment
- */
-bool gma_power_is_on(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- return dev_priv->display_power;
-}
-
-/**
- * gma_power_begin - begin requiring power
- * @dev: our DRM device
- * @force_on: true to force power on
- *
- * Begin an action that requires the display power island is enabled.
- * We refcount the islands.
- */
-bool gma_power_begin(struct drm_device *dev, bool force_on)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&power_ctrl_lock, flags);
- /* Power already on ? */
- if (dev_priv->display_power) {
- dev_priv->display_count++;
- pm_runtime_get(&dev->pdev->dev);
- spin_unlock_irqrestore(&power_ctrl_lock, flags);
- return true;
- }
- if (force_on == false)
- goto out_false;
-
- /* Ok power up needed */
- ret = gma_resume_pci(dev->pdev);
- if (ret == 0) {
- /* FIXME: we want to defer this for Medfield/Oaktrail */
- gma_resume_display(dev->pdev);
- psb_irq_preinstall(dev);
- psb_irq_postinstall(dev);
- pm_runtime_get(&dev->pdev->dev);
- dev_priv->display_count++;
- spin_unlock_irqrestore(&power_ctrl_lock, flags);
- return true;
- }
-out_false:
- spin_unlock_irqrestore(&power_ctrl_lock, flags);
- return false;
-}
-
-/**
- * gma_power_end - end use of power
- * @dev: Our DRM device
- *
- * Indicate that one of our gma_power_begin() requested periods when
- * the diplay island power is needed has completed.
- */
-void gma_power_end(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- unsigned long flags;
- spin_lock_irqsave(&power_ctrl_lock, flags);
- dev_priv->display_count--;
- WARN_ON(dev_priv->display_count < 0);
- spin_unlock_irqrestore(&power_ctrl_lock, flags);
- pm_runtime_put(&dev->pdev->dev);
-}
-
-int psb_runtime_suspend(struct device *dev)
-{
- return gma_power_suspend(dev);
-}
-
-int psb_runtime_resume(struct device *dev)
-{
- return gma_power_resume(dev);;
-}
-
-int psb_runtime_idle(struct device *dev)
-{
- struct drm_device *drmdev = pci_get_drvdata(to_pci_dev(dev));
- struct drm_psb_private *dev_priv = drmdev->dev_private;
- if (dev_priv->display_count)
- return 0;
- else
- return 1;
-}
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2009-2011, Intel Corporation.
- * All Rights Reserved.
-
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- * Authors:
- * Benjamin Defnet <benjamin.r.defnet@intel.com>
- * Rajesh Poornachandran <rajesh.poornachandran@intel.com>
- * Massively reworked
- * Alan Cox <alan@linux.intel.com>
- */
-#ifndef _PSB_POWERMGMT_H_
-#define _PSB_POWERMGMT_H_
-
-#include <linux/pci.h>
-#include <drm/drmP.h>
-
-void gma_power_init(struct drm_device *dev);
-void gma_power_uninit(struct drm_device *dev);
-
-/*
- * The kernel bus power management will call these functions
- */
-int gma_power_suspend(struct device *dev);
-int gma_power_resume(struct device *dev);
-
-/*
- * These are the functions the driver should use to wrap all hw access
- * (i.e. register reads and writes)
- */
-bool gma_power_begin(struct drm_device *dev, bool force);
-void gma_power_end(struct drm_device *dev);
-
-/*
- * Use this function to do an instantaneous check for if the hw is on.
- * Only use this in cases where you know the mutex is already held such
- * as in irq install/uninstall and you need to
- * prevent a deadlock situation. Otherwise use gma_power_begin().
- */
-bool gma_power_is_on(struct drm_device *dev);
-
-/*
- * GFX-Runtime PM callbacks
- */
-int psb_runtime_suspend(struct device *dev);
-int psb_runtime_resume(struct device *dev);
-int psb_runtime_idle(struct device *dev);
-
-#endif /*_PSB_POWERMGMT_H_*/
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-#include <linux/backlight.h>
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include "psb_drm.h"
-#include "psb_drv.h"
-#include "psb_reg.h"
-#include "psb_intel_reg.h"
-#include "intel_bios.h"
-
-
-static int psb_output_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- psb_intel_lvds_init(dev, &dev_priv->mode_dev);
- psb_intel_sdvo_init(dev, SDVOB);
- return 0;
-}
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-
-/*
- * Poulsbo Backlight Interfaces
- */
-
-#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */
-#define BLC_PWM_FREQ_CALC_CONSTANT 32
-#define MHz 1000000
-
-#define PSB_BLC_PWM_PRECISION_FACTOR 10
-#define PSB_BLC_MAX_PWM_REG_FREQ 0xFFFE
-#define PSB_BLC_MIN_PWM_REG_FREQ 0x2
-
-#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
-#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16)
-
-static int psb_brightness;
-static struct backlight_device *psb_backlight_device;
-
-static int psb_get_brightness(struct backlight_device *bd)
-{
- /* return locally cached var instead of HW read (due to DPST etc.) */
- /* FIXME: ideally return actual value in case firmware fiddled with
- it */
- return psb_brightness;
-}
-
-
-static int psb_backlight_setup(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- unsigned long core_clock;
- /* u32 bl_max_freq; */
- /* unsigned long value; */
- u16 bl_max_freq;
- uint32_t value;
- uint32_t blc_pwm_precision_factor;
-
- /* get bl_max_freq and pol from dev_priv*/
- if (!dev_priv->lvds_bl) {
- dev_err(dev->dev, "Has no valid LVDS backlight info\n");
- return -ENOENT;
- }
- bl_max_freq = dev_priv->lvds_bl->freq;
- blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
-
- core_clock = dev_priv->core_freq;
-
- value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
- value *= blc_pwm_precision_factor;
- value /= bl_max_freq;
- value /= blc_pwm_precision_factor;
-
- if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
- value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
- return -ERANGE;
- else {
- value &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
- REG_WRITE(BLC_PWM_CTL,
- (value << PSB_BACKLIGHT_PWM_CTL_SHIFT) | (value));
- }
- return 0;
-}
-
-static int psb_set_brightness(struct backlight_device *bd)
-{
- struct drm_device *dev = bl_get_data(psb_backlight_device);
- int level = bd->props.brightness;
-
- /* Percentage 1-100% being valid */
- if (level < 1)
- level = 1;
-
- psb_intel_lvds_set_brightness(dev, level);
- psb_brightness = level;
- return 0;
-}
-
-static const struct backlight_ops psb_ops = {
- .get_brightness = psb_get_brightness,
- .update_status = psb_set_brightness,
-};
-
-static int psb_backlight_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- int ret;
- struct backlight_properties props;
-
- memset(&props, 0, sizeof(struct backlight_properties));
- props.max_brightness = 100;
- props.type = BACKLIGHT_PLATFORM;
-
- psb_backlight_device = backlight_device_register("psb-bl",
- NULL, (void *)dev, &psb_ops, &props);
- if (IS_ERR(psb_backlight_device))
- return PTR_ERR(psb_backlight_device);
-
- ret = psb_backlight_setup(dev);
- if (ret < 0) {
- backlight_device_unregister(psb_backlight_device);
- psb_backlight_device = NULL;
- return ret;
- }
- psb_backlight_device->props.brightness = 100;
- psb_backlight_device->props.max_brightness = 100;
- backlight_update_status(psb_backlight_device);
- dev_priv->backlight_device = psb_backlight_device;
- return 0;
-}
-
-#endif
-
-/*
- * Provide the Poulsbo specific chip logic and low level methods
- * for power management
- */
-
-static void psb_init_pm(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- u32 gating = PSB_RSGX32(PSB_CR_CLKGATECTL);
- gating &= ~3; /* Disable 2D clock gating */
- gating |= 1;
- PSB_WSGX32(gating, PSB_CR_CLKGATECTL);
- PSB_RSGX32(PSB_CR_CLKGATECTL);
-}
-
-/**
- * psb_save_display_registers - save registers lost on suspend
- * @dev: our DRM device
- *
- * Save the state we need in order to be able to restore the interface
- * upon resume from suspend
- */
-static int psb_save_display_registers(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc;
- struct drm_connector *connector;
-
- /* Display arbitration control + watermarks */
- dev_priv->saveDSPARB = PSB_RVDC32(DSPARB);
- dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1);
- dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2);
- dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3);
- dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4);
- dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5);
- dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6);
- dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
-
- /* Save crtc and output state */
- mutex_lock(&dev->mode_config.mutex);
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- if (drm_helper_crtc_in_use(crtc))
- crtc->funcs->save(crtc);
- }
-
- list_for_each_entry(connector, &dev->mode_config.connector_list, head)
- connector->funcs->save(connector);
-
- mutex_unlock(&dev->mode_config.mutex);
- return 0;
-}
-
-/**
- * psb_restore_display_registers - restore lost register state
- * @dev: our DRM device
- *
- * Restore register state that was lost during suspend and resume.
- */
-static int psb_restore_display_registers(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc;
- struct drm_connector *connector;
-
- /* Display arbitration + watermarks */
- PSB_WVDC32(dev_priv->saveDSPARB, DSPARB);
- PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1);
- PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2);
- PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3);
- PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4);
- PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5);
- PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6);
- PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT);
-
- /*make sure VGA plane is off. it initializes to on after reset!*/
- PSB_WVDC32(0x80000000, VGACNTRL);
-
- mutex_lock(&dev->mode_config.mutex);
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
- if (drm_helper_crtc_in_use(crtc))
- crtc->funcs->restore(crtc);
-
- list_for_each_entry(connector, &dev->mode_config.connector_list, head)
- connector->funcs->restore(connector);
-
- mutex_unlock(&dev->mode_config.mutex);
- return 0;
-}
-
-static int psb_power_down(struct drm_device *dev)
-{
- return 0;
-}
-
-static int psb_power_up(struct drm_device *dev)
-{
- return 0;
-}
-
-static void psb_get_core_freq(struct drm_device *dev)
-{
- uint32_t clock;
- struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- /*pci_write_config_dword(pci_root, 0xD4, 0x00C32004);*/
- /*pci_write_config_dword(pci_root, 0xD0, 0xE0033000);*/
-
- pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
- pci_read_config_dword(pci_root, 0xD4, &clock);
- pci_dev_put(pci_root);
-
- switch (clock & 0x07) {
- case 0:
- dev_priv->core_freq = 100;
- break;
- case 1:
- dev_priv->core_freq = 133;
- break;
- case 2:
- dev_priv->core_freq = 150;
- break;
- case 3:
- dev_priv->core_freq = 178;
- break;
- case 4:
- dev_priv->core_freq = 200;
- break;
- case 5:
- case 6:
- case 7:
- dev_priv->core_freq = 266;
- default:
- dev_priv->core_freq = 0;
- }
-}
-
-static int psb_chip_setup(struct drm_device *dev)
-{
- psb_get_core_freq(dev);
- gma_intel_opregion_init(dev);
- psb_intel_init_bios(dev);
- return 0;
-}
-
-const struct psb_ops psb_chip_ops = {
- .name = "Poulsbo",
- .accel_2d = 1,
- .pipes = 2,
- .crtcs = 2,
- .sgx_offset = PSB_SGX_OFFSET,
- .chip_setup = psb_chip_setup,
-
- .crtc_helper = &psb_intel_helper_funcs,
- .crtc_funcs = &psb_intel_crtc_funcs,
-
- .output_init = psb_output_init,
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- .backlight_init = psb_backlight_init,
-#endif
-
- .init_pm = psb_init_pm,
- .save_regs = psb_save_display_registers,
- .restore_regs = psb_restore_display_registers,
- .power_down = psb_power_down,
- .power_up = psb_power_up,
-};
-
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2007-2011, Intel Corporation.
- * All Rights Reserved.
- * Copyright (c) 2008, Tungsten Graphics Inc. Cedar Park, TX., USA.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-#ifndef _PSB_DRM_H_
-#define _PSB_DRM_H_
-
-#define PSB_NUM_PIPE 3
-
-#define PSB_GPU_ACCESS_READ (1ULL << 32)
-#define PSB_GPU_ACCESS_WRITE (1ULL << 33)
-#define PSB_GPU_ACCESS_MASK (PSB_GPU_ACCESS_READ | PSB_GPU_ACCESS_WRITE)
-
-#define PSB_BO_FLAG_COMMAND (1ULL << 52)
-
-/*
- * Feedback components:
- */
-
-struct drm_psb_sizes_arg {
- u32 ta_mem_size;
- u32 mmu_size;
- u32 pds_size;
- u32 rastgeom_size;
- u32 tt_size;
- u32 vram_size;
-};
-
-struct drm_psb_dpst_lut_arg {
- uint8_t lut[256];
- int output_id;
-};
-
-#define PSB_DC_CRTC_SAVE 0x01
-#define PSB_DC_CRTC_RESTORE 0x02
-#define PSB_DC_OUTPUT_SAVE 0x04
-#define PSB_DC_OUTPUT_RESTORE 0x08
-#define PSB_DC_CRTC_MASK 0x03
-#define PSB_DC_OUTPUT_MASK 0x0C
-
-struct drm_psb_dc_state_arg {
- u32 flags;
- u32 obj_id;
-};
-
-struct drm_psb_mode_operation_arg {
- u32 obj_id;
- u16 operation;
- struct drm_mode_modeinfo mode;
- void *data;
-};
-
-struct drm_psb_stolen_memory_arg {
- u32 base;
- u32 size;
-};
-
-/*Display Register Bits*/
-#define REGRWBITS_PFIT_CONTROLS (1 << 0)
-#define REGRWBITS_PFIT_AUTOSCALE_RATIOS (1 << 1)
-#define REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS (1 << 2)
-#define REGRWBITS_PIPEASRC (1 << 3)
-#define REGRWBITS_PIPEBSRC (1 << 4)
-#define REGRWBITS_VTOTAL_A (1 << 5)
-#define REGRWBITS_VTOTAL_B (1 << 6)
-#define REGRWBITS_DSPACNTR (1 << 8)
-#define REGRWBITS_DSPBCNTR (1 << 9)
-#define REGRWBITS_DSPCCNTR (1 << 10)
-
-/*Overlay Register Bits*/
-#define OV_REGRWBITS_OVADD (1 << 0)
-#define OV_REGRWBITS_OGAM_ALL (1 << 1)
-
-#define OVC_REGRWBITS_OVADD (1 << 2)
-#define OVC_REGRWBITS_OGAM_ALL (1 << 3)
-
-struct drm_psb_register_rw_arg {
- u32 b_force_hw_on;
-
- u32 display_read_mask;
- u32 display_write_mask;
-
- struct {
- u32 pfit_controls;
- u32 pfit_autoscale_ratios;
- u32 pfit_programmed_scale_ratios;
- u32 pipeasrc;
- u32 pipebsrc;
- u32 vtotal_a;
- u32 vtotal_b;
- } display;
-
- u32 overlay_read_mask;
- u32 overlay_write_mask;
-
- struct {
- u32 OVADD;
- u32 OGAMC0;
- u32 OGAMC1;
- u32 OGAMC2;
- u32 OGAMC3;
- u32 OGAMC4;
- u32 OGAMC5;
- u32 IEP_ENABLED;
- u32 IEP_BLE_MINMAX;
- u32 IEP_BSSCC_CONTROL;
- u32 b_wait_vblank;
- } overlay;
-
- u32 sprite_enable_mask;
- u32 sprite_disable_mask;
-
- struct {
- u32 dspa_control;
- u32 dspa_key_value;
- u32 dspa_key_mask;
- u32 dspc_control;
- u32 dspc_stride;
- u32 dspc_position;
- u32 dspc_linear_offset;
- u32 dspc_size;
- u32 dspc_surface;
- } sprite;
-
- u32 subpicture_enable_mask;
- u32 subpicture_disable_mask;
-};
-
-/* Controlling the kernel modesetting buffers */
-
-#define DRM_PSB_SIZES 0x07
-#define DRM_PSB_FUSE_REG 0x08
-#define DRM_PSB_DC_STATE 0x0A
-#define DRM_PSB_ADB 0x0B
-#define DRM_PSB_MODE_OPERATION 0x0C
-#define DRM_PSB_STOLEN_MEMORY 0x0D
-#define DRM_PSB_REGISTER_RW 0x0E
-
-/*
- * NOTE: Add new commands here, but increment
- * the values below and increment their
- * corresponding defines where they're
- * defined elsewhere.
- */
-
-#define DRM_PSB_GEM_CREATE 0x10
-#define DRM_PSB_2D_OP 0x11
-#define DRM_PSB_GEM_MMAP 0x12
-#define DRM_PSB_DPST 0x1B
-#define DRM_PSB_GAMMA 0x1C
-#define DRM_PSB_DPST_BL 0x1D
-#define DRM_PSB_GET_PIPE_FROM_CRTC_ID 0x1F
-
-#define PSB_MODE_OPERATION_MODE_VALID 0x01
-#define PSB_MODE_OPERATION_SET_DC_BASE 0x02
-
-struct drm_psb_get_pipe_from_crtc_id_arg {
- /** ID of CRTC being requested **/
- u32 crtc_id;
-
- /** pipe of requested CRTC **/
- u32 pipe;
-};
-
-/* FIXME: move this into a medfield header once we are sure it isn't needed for an
- ioctl */
-struct psb_drm_dpu_rect {
- int x, y;
- int width, height;
-};
-
-struct drm_psb_gem_create {
- __u64 size;
- __u32 handle;
- __u32 flags;
-#define PSB_GEM_CREATE_STOLEN 1 /* Stolen memory can be used */
-};
-
-#define PSB_2D_OP_BUFLEN 16
-
-struct drm_psb_2d_op {
- __u32 src; /* Handles, only src supported right now */
- __u32 dst;
- __u32 mask;
- __u32 pat;
- __u32 size; /* In dwords of command */
- __u32 spare; /* And bumps array to u64 align */
- __u32 cmd[PSB_2D_OP_BUFLEN];
-};
-
-struct drm_psb_gem_mmap {
- __u32 handle;
- __u32 pad;
- /**
- * Fake offset to use for subsequent mmap call
- *
- * This is a fixed-size type for 32/64 compatibility.
- */
- __u64 offset;
-};
-
-#endif
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2007-2011, Intel Corporation.
- * All Rights Reserved.
- * Copyright (c) 2008, Tungsten Graphics, Inc. Cedar Park, TX., USA.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include "psb_drm.h"
-#include "psb_drv.h"
-#include "framebuffer.h"
-#include "psb_reg.h"
-#include "psb_intel_reg.h"
-#include "intel_bios.h"
-#include "mid_bios.h"
-#include "mdfld_dsi_dbi.h"
-#include <drm/drm_pciids.h>
-#include "power.h"
-#include <linux/cpu.h>
-#include <linux/notifier.h>
-#include <linux/spinlock.h>
-#include <linux/pm_runtime.h>
-#include <linux/module.h>
-#include <acpi/video.h>
-
-static int drm_psb_trap_pagefaults;
-
-int drm_psb_no_fb;
-
-static int psb_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
-
-MODULE_PARM_DESC(no_fb, "Disable FBdev");
-MODULE_PARM_DESC(trap_pagefaults, "Error and reset on MMU pagefaults");
-module_param_named(no_fb, drm_psb_no_fb, int, 0600);
-module_param_named(trap_pagefaults, drm_psb_trap_pagefaults, int, 0600);
-
-
-static DEFINE_PCI_DEVICE_TABLE(pciidlist) = {
- { 0x8086, 0x8108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops },
- { 0x8086, 0x8109, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops },
-#if defined(CONFIG_DRM_PSB_MRST)
- { 0x8086, 0x4100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
- { 0x8086, 0x4101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
- { 0x8086, 0x4102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
- { 0x8086, 0x4103, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
- { 0x8086, 0x4104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
- { 0x8086, 0x4105, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
- { 0x8086, 0x4106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
- { 0x8086, 0x4107, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
-#endif
-#if defined(CONFIG_DRM_PSB_MFLD)
- { 0x8086, 0x0130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
- { 0x8086, 0x0131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
- { 0x8086, 0x0132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
- { 0x8086, 0x0133, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
- { 0x8086, 0x0134, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
- { 0x8086, 0x0135, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
- { 0x8086, 0x0136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
- { 0x8086, 0x0137, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
-#endif
-#if defined(CONFIG_DRM_PSB_CDV)
- { 0x8086, 0x0be0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
- { 0x8086, 0x0be1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
- { 0x8086, 0x0be2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
- { 0x8086, 0x0be3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
- { 0x8086, 0x0be4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
- { 0x8086, 0x0be5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
- { 0x8086, 0x0be6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
- { 0x8086, 0x0be7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
-#endif
- { 0, 0, 0}
-};
-MODULE_DEVICE_TABLE(pci, pciidlist);
-
-/*
- * Standard IOCTLs.
- */
-
-#define DRM_IOCTL_PSB_SIZES \
- DRM_IOR(DRM_PSB_SIZES + DRM_COMMAND_BASE, \
- struct drm_psb_sizes_arg)
-#define DRM_IOCTL_PSB_FUSE_REG \
- DRM_IOWR(DRM_PSB_FUSE_REG + DRM_COMMAND_BASE, uint32_t)
-#define DRM_IOCTL_PSB_DC_STATE \
- DRM_IOW(DRM_PSB_DC_STATE + DRM_COMMAND_BASE, \
- struct drm_psb_dc_state_arg)
-#define DRM_IOCTL_PSB_ADB \
- DRM_IOWR(DRM_PSB_ADB + DRM_COMMAND_BASE, uint32_t)
-#define DRM_IOCTL_PSB_MODE_OPERATION \
- DRM_IOWR(DRM_PSB_MODE_OPERATION + DRM_COMMAND_BASE, \
- struct drm_psb_mode_operation_arg)
-#define DRM_IOCTL_PSB_STOLEN_MEMORY \
- DRM_IOWR(DRM_PSB_STOLEN_MEMORY + DRM_COMMAND_BASE, \
- struct drm_psb_stolen_memory_arg)
-#define DRM_IOCTL_PSB_REGISTER_RW \
- DRM_IOWR(DRM_PSB_REGISTER_RW + DRM_COMMAND_BASE, \
- struct drm_psb_register_rw_arg)
-#define DRM_IOCTL_PSB_DPST \
- DRM_IOWR(DRM_PSB_DPST + DRM_COMMAND_BASE, \
- uint32_t)
-#define DRM_IOCTL_PSB_GAMMA \
- DRM_IOWR(DRM_PSB_GAMMA + DRM_COMMAND_BASE, \
- struct drm_psb_dpst_lut_arg)
-#define DRM_IOCTL_PSB_DPST_BL \
- DRM_IOWR(DRM_PSB_DPST_BL + DRM_COMMAND_BASE, \
- uint32_t)
-#define DRM_IOCTL_PSB_GET_PIPE_FROM_CRTC_ID \
- DRM_IOWR(DRM_PSB_GET_PIPE_FROM_CRTC_ID + DRM_COMMAND_BASE, \
- struct drm_psb_get_pipe_from_crtc_id_arg)
-#define DRM_IOCTL_PSB_GEM_CREATE \
- DRM_IOWR(DRM_PSB_GEM_CREATE + DRM_COMMAND_BASE, \
- struct drm_psb_gem_create)
-#define DRM_IOCTL_PSB_2D_OP \
- DRM_IOW(DRM_PSB_2D_OP + DRM_COMMAND_BASE, \
- struct drm_psb_2d_op)
-#define DRM_IOCTL_PSB_GEM_MMAP \
- DRM_IOWR(DRM_PSB_GEM_MMAP + DRM_COMMAND_BASE, \
- struct drm_psb_gem_mmap)
-
-static int psb_sizes_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
-static int psb_dc_state_ioctl(struct drm_device *dev, void * data,
- struct drm_file *file_priv);
-static int psb_adb_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
-static int psb_mode_operation_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
-static int psb_stolen_memory_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
-static int psb_register_rw_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
-static int psb_dpst_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
-static int psb_gamma_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
-static int psb_dpst_bl_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
-
-#define PSB_IOCTL_DEF(ioctl, func, flags) \
- [DRM_IOCTL_NR(ioctl) - DRM_COMMAND_BASE] = {ioctl, flags, func}
-
-static struct drm_ioctl_desc psb_ioctls[] = {
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_SIZES, psb_sizes_ioctl, DRM_AUTH),
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_DC_STATE, psb_dc_state_ioctl, DRM_AUTH),
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_ADB, psb_adb_ioctl, DRM_AUTH),
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_MODE_OPERATION, psb_mode_operation_ioctl,
- DRM_AUTH),
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_STOLEN_MEMORY, psb_stolen_memory_ioctl,
- DRM_AUTH),
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_REGISTER_RW, psb_register_rw_ioctl,
- DRM_AUTH),
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_DPST, psb_dpst_ioctl, DRM_AUTH),
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_GAMMA, psb_gamma_ioctl, DRM_AUTH),
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_DPST_BL, psb_dpst_bl_ioctl, DRM_AUTH),
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_GET_PIPE_FROM_CRTC_ID,
- psb_intel_get_pipe_from_crtc_id, 0),
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_GEM_CREATE, psb_gem_create_ioctl,
- DRM_UNLOCKED | DRM_AUTH),
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_2D_OP, psb_accel_ioctl,
- DRM_UNLOCKED| DRM_AUTH),
- PSB_IOCTL_DEF(DRM_IOCTL_PSB_GEM_MMAP, psb_gem_mmap_ioctl,
- DRM_UNLOCKED | DRM_AUTH),
-};
-
-static void psb_lastclose(struct drm_device *dev)
-{
- return;
-}
-
-static void psb_do_takedown(struct drm_device *dev)
-{
-}
-
-static int psb_do_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_gtt *pg = &dev_priv->gtt;
-
- uint32_t stolen_gtt;
-
- int ret = -ENOMEM;
-
- if (pg->mmu_gatt_start & 0x0FFFFFFF) {
- dev_err(dev->dev, "Gatt must be 256M aligned. This is a bug.\n");
- ret = -EINVAL;
- goto out_err;
- }
-
-
- stolen_gtt = (pg->stolen_size >> PAGE_SHIFT) * 4;
- stolen_gtt = (stolen_gtt + PAGE_SIZE - 1) >> PAGE_SHIFT;
- stolen_gtt =
- (stolen_gtt < pg->gtt_pages) ? stolen_gtt : pg->gtt_pages;
-
- dev_priv->gatt_free_offset = pg->mmu_gatt_start +
- (stolen_gtt << PAGE_SHIFT) * 1024;
-
- if (1 || drm_debug) {
- uint32_t core_id = PSB_RSGX32(PSB_CR_CORE_ID);
- uint32_t core_rev = PSB_RSGX32(PSB_CR_CORE_REVISION);
- DRM_INFO("SGX core id = 0x%08x\n", core_id);
- DRM_INFO("SGX core rev major = 0x%02x, minor = 0x%02x\n",
- (core_rev & _PSB_CC_REVISION_MAJOR_MASK) >>
- _PSB_CC_REVISION_MAJOR_SHIFT,
- (core_rev & _PSB_CC_REVISION_MINOR_MASK) >>
- _PSB_CC_REVISION_MINOR_SHIFT);
- DRM_INFO
- ("SGX core rev maintenance = 0x%02x, designer = 0x%02x\n",
- (core_rev & _PSB_CC_REVISION_MAINTENANCE_MASK) >>
- _PSB_CC_REVISION_MAINTENANCE_SHIFT,
- (core_rev & _PSB_CC_REVISION_DESIGNER_MASK) >>
- _PSB_CC_REVISION_DESIGNER_SHIFT);
- }
-
-
- spin_lock_init(&dev_priv->irqmask_lock);
- spin_lock_init(&dev_priv->lock_2d);
-
- PSB_WSGX32(0x00000000, PSB_CR_BIF_BANK0);
- PSB_WSGX32(0x00000000, PSB_CR_BIF_BANK1);
- PSB_RSGX32(PSB_CR_BIF_BANK1);
- PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) | _PSB_MMU_ER_MASK,
- PSB_CR_BIF_CTRL);
- psb_spank(dev_priv);
-
- /* mmu_gatt ?? */
- PSB_WSGX32(pg->gatt_start, PSB_CR_BIF_TWOD_REQ_BASE);
- return 0;
-out_err:
- psb_do_takedown(dev);
- return ret;
-}
-
-static int psb_driver_unload(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- /* Kill vblank etc here */
-
- gma_backlight_exit(dev);
-
- if (drm_psb_no_fb == 0)
- psb_modeset_cleanup(dev);
-
- if (dev_priv) {
- psb_lid_timer_takedown(dev_priv);
- gma_intel_opregion_exit(dev);
-
- if (dev_priv->ops->chip_teardown)
- dev_priv->ops->chip_teardown(dev);
- psb_do_takedown(dev);
-
-
- if (dev_priv->pf_pd) {
- psb_mmu_free_pagedir(dev_priv->pf_pd);
- dev_priv->pf_pd = NULL;
- }
- if (dev_priv->mmu) {
- struct psb_gtt *pg = &dev_priv->gtt;
-
- down_read(&pg->sem);
- psb_mmu_remove_pfn_sequence(
- psb_mmu_get_default_pd
- (dev_priv->mmu),
- pg->mmu_gatt_start,
- dev_priv->vram_stolen_size >> PAGE_SHIFT);
- up_read(&pg->sem);
- psb_mmu_driver_takedown(dev_priv->mmu);
- dev_priv->mmu = NULL;
- }
- psb_gtt_takedown(dev);
- if (dev_priv->scratch_page) {
- __free_page(dev_priv->scratch_page);
- dev_priv->scratch_page = NULL;
- }
- if (dev_priv->vdc_reg) {
- iounmap(dev_priv->vdc_reg);
- dev_priv->vdc_reg = NULL;
- }
- if (dev_priv->sgx_reg) {
- iounmap(dev_priv->sgx_reg);
- dev_priv->sgx_reg = NULL;
- }
-
- kfree(dev_priv);
- dev->dev_private = NULL;
-
- /*destroy VBT data*/
- psb_intel_destroy_bios(dev);
- }
-
- gma_power_uninit(dev);
-
- return 0;
-}
-
-
-static int psb_driver_load(struct drm_device *dev, unsigned long chipset)
-{
- struct drm_psb_private *dev_priv;
- unsigned long resource_start;
- struct psb_gtt *pg;
- unsigned long irqflags;
- int ret = -ENOMEM;
- uint32_t tt_pages;
- struct drm_connector *connector;
- struct psb_intel_output *psb_intel_output;
-
- dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
- if (dev_priv == NULL)
- return -ENOMEM;
-
- dev_priv->ops = (struct psb_ops *)chipset;
- dev_priv->dev = dev;
- dev->dev_private = (void *) dev_priv;
-
- if (!IS_PSB(dev)) {
- if (pci_enable_msi(dev->pdev))
- dev_warn(dev->dev, "Enabling MSI failed!\n");
- }
-
- dev_priv->num_pipe = dev_priv->ops->pipes;
-
- resource_start = pci_resource_start(dev->pdev, PSB_MMIO_RESOURCE);
-
- dev_priv->vdc_reg =
- ioremap(resource_start + PSB_VDC_OFFSET, PSB_VDC_SIZE);
- if (!dev_priv->vdc_reg)
- goto out_err;
-
- dev_priv->sgx_reg = ioremap(resource_start + dev_priv->ops->sgx_offset,
- PSB_SGX_SIZE);
- if (!dev_priv->sgx_reg)
- goto out_err;
-
- ret = dev_priv->ops->chip_setup(dev);
- if (ret)
- goto out_err;
-
- /* Init OSPM support */
- gma_power_init(dev);
-
- ret = -ENOMEM;
-
- dev_priv->scratch_page = alloc_page(GFP_DMA32 | __GFP_ZERO);
- if (!dev_priv->scratch_page)
- goto out_err;
-
- set_pages_uc(dev_priv->scratch_page, 1);
-
- ret = psb_gtt_init(dev, 0);
- if (ret)
- goto out_err;
-
- dev_priv->mmu = psb_mmu_driver_init((void *)0,
- drm_psb_trap_pagefaults, 0,
- dev_priv);
- if (!dev_priv->mmu)
- goto out_err;
-
- pg = &dev_priv->gtt;
-
- tt_pages = (pg->gatt_pages < PSB_TT_PRIV0_PLIMIT) ?
- (pg->gatt_pages) : PSB_TT_PRIV0_PLIMIT;
-
-
- dev_priv->pf_pd = psb_mmu_alloc_pd(dev_priv->mmu, 1, 0);
- if (!dev_priv->pf_pd)
- goto out_err;
-
- psb_mmu_set_pd_context(psb_mmu_get_default_pd(dev_priv->mmu), 0);
- psb_mmu_set_pd_context(dev_priv->pf_pd, 1);
-
- ret = psb_do_init(dev);
- if (ret)
- return ret;
-
- PSB_WSGX32(0x20000000, PSB_CR_PDS_EXEC_BASE);
- PSB_WSGX32(0x30000000, PSB_CR_BIF_3D_REQ_BASE);
-
-/* igd_opregion_init(&dev_priv->opregion_dev); */
- acpi_video_register();
- if (dev_priv->lid_state)
- psb_lid_timer_init(dev_priv);
-
- ret = drm_vblank_init(dev, dev_priv->num_pipe);
- if (ret)
- goto out_err;
-
- /*
- * Install interrupt handlers prior to powering off SGX or else we will
- * crash.
- */
- dev_priv->vdc_irq_mask = 0;
- dev_priv->pipestat[0] = 0;
- dev_priv->pipestat[1] = 0;
- dev_priv->pipestat[2] = 0;
- spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
- PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM);
- PSB_WVDC32(0x00000000, PSB_INT_ENABLE_R);
- PSB_WVDC32(0xFFFFFFFF, PSB_INT_MASK_R);
- spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
- if (IS_PSB(dev) && drm_core_check_feature(dev, DRIVER_MODESET))
- drm_irq_install(dev);
-
- dev->vblank_disable_allowed = 1;
-
- dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
-
- dev->driver->get_vblank_counter = psb_get_vblank_counter;
-
-#if defined(CONFIG_DRM_PSB_MFLD)
- /* FIXME: this is not the right place for this stuff ! */
- mdfld_output_setup(dev);
-#endif
- if (drm_psb_no_fb == 0) {
- psb_modeset_init(dev);
- psb_fbdev_init(dev);
- drm_kms_helper_poll_init(dev);
- }
-
- /* Only add backlight support if we have LVDS output */
- list_for_each_entry(connector, &dev->mode_config.connector_list,
- head) {
- psb_intel_output = to_psb_intel_output(connector);
-
- switch (psb_intel_output->type) {
- case INTEL_OUTPUT_LVDS:
- case INTEL_OUTPUT_MIPI:
- ret = gma_backlight_init(dev);
- break;
- }
- }
-
- if (ret)
- return ret;
-
- /* Enable runtime pm at last */
- pm_runtime_set_active(&dev->pdev->dev);
- return 0;
-out_err:
- psb_driver_unload(dev);
- return ret;
-}
-
-int psb_driver_device_is_agp(struct drm_device *dev)
-{
- return 0;
-}
-
-
-static int psb_sizes_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_psb_private *dev_priv = psb_priv(dev);
- struct drm_psb_sizes_arg *arg = data;
-
- *arg = dev_priv->sizes;
- return 0;
-}
-
-static int psb_dc_state_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- uint32_t flags;
- uint32_t obj_id;
- struct drm_mode_object *obj;
- struct drm_connector *connector;
- struct drm_crtc *crtc;
- struct drm_psb_dc_state_arg *arg = data;
-
-
- /* Double check MRST case */
- if (IS_MRST(dev) || IS_MFLD(dev))
- return -EOPNOTSUPP;
-
- flags = arg->flags;
- obj_id = arg->obj_id;
-
- if (flags & PSB_DC_CRTC_MASK) {
- obj = drm_mode_object_find(dev, obj_id,
- DRM_MODE_OBJECT_CRTC);
- if (!obj) {
- dev_dbg(dev->dev, "Invalid CRTC object.\n");
- return -EINVAL;
- }
-
- crtc = obj_to_crtc(obj);
-
- mutex_lock(&dev->mode_config.mutex);
- if (drm_helper_crtc_in_use(crtc)) {
- if (flags & PSB_DC_CRTC_SAVE)
- crtc->funcs->save(crtc);
- else
- crtc->funcs->restore(crtc);
- }
- mutex_unlock(&dev->mode_config.mutex);
-
- return 0;
- } else if (flags & PSB_DC_OUTPUT_MASK) {
- obj = drm_mode_object_find(dev, obj_id,
- DRM_MODE_OBJECT_CONNECTOR);
- if (!obj) {
- dev_dbg(dev->dev, "Invalid connector id.\n");
- return -EINVAL;
- }
-
- connector = obj_to_connector(obj);
- if (flags & PSB_DC_OUTPUT_SAVE)
- connector->funcs->save(connector);
- else
- connector->funcs->restore(connector);
-
- return 0;
- }
- return -EINVAL;
-}
-
-static inline void get_brightness(struct backlight_device *bd)
-{
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- if (bd) {
- bd->props.brightness = bd->ops->get_brightness(bd);
- backlight_update_status(bd);
- }
-#endif
-}
-
-static int psb_dpst_bl_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_psb_private *dev_priv = psb_priv(dev);
- uint32_t *arg = data;
-
- dev_priv->blc_adj2 = *arg;
- get_brightness(dev_priv->backlight_device);
- return 0;
-}
-
-static int psb_adb_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_psb_private *dev_priv = psb_priv(dev);
- uint32_t *arg = data;
-
- dev_priv->blc_adj1 = *arg;
- get_brightness(dev_priv->backlight_device);
- return 0;
-}
-
-/* return the current mode to the dpst module */
-static int psb_dpst_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_psb_private *dev_priv = psb_priv(dev);
- uint32_t *arg = data;
- uint32_t x;
- uint32_t y;
- uint32_t reg;
-
- if (!gma_power_begin(dev, 0))
- return -EIO;
-
- reg = PSB_RVDC32(PIPEASRC);
-
- gma_power_end(dev);
-
- /* horizontal is the left 16 bits */
- x = reg >> 16;
- /* vertical is the right 16 bits */
- y = reg & 0x0000ffff;
-
- /* the values are the image size minus one */
- x++;
- y++;
-
- *arg = (x << 16) | y;
-
- return 0;
-}
-static int psb_gamma_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_psb_dpst_lut_arg *lut_arg = data;
- struct drm_mode_object *obj;
- struct drm_crtc *crtc;
- struct drm_connector *connector;
- struct psb_intel_crtc *psb_intel_crtc;
- int i = 0;
- int32_t obj_id;
-
- obj_id = lut_arg->output_id;
- obj = drm_mode_object_find(dev, obj_id, DRM_MODE_OBJECT_CONNECTOR);
- if (!obj) {
- dev_dbg(dev->dev, "Invalid Connector object.\n");
- return -EINVAL;
- }
-
- connector = obj_to_connector(obj);
- crtc = connector->encoder->crtc;
- psb_intel_crtc = to_psb_intel_crtc(crtc);
-
- for (i = 0; i < 256; i++)
- psb_intel_crtc->lut_adj[i] = lut_arg->lut[i];
-
- psb_intel_crtc_load_lut(crtc);
-
- return 0;
-}
-
-static int psb_mode_operation_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- uint32_t obj_id;
- uint16_t op;
- struct drm_mode_modeinfo *umode;
- struct drm_display_mode *mode = NULL;
- struct drm_psb_mode_operation_arg *arg;
- struct drm_mode_object *obj;
- struct drm_connector *connector;
- struct drm_framebuffer *drm_fb;
- struct psb_framebuffer *psb_fb;
- struct drm_connector_helper_funcs *connector_funcs;
- int ret = 0;
- int resp = MODE_OK;
- struct drm_psb_private *dev_priv = psb_priv(dev);
-
- arg = (struct drm_psb_mode_operation_arg *)data;
- obj_id = arg->obj_id;
- op = arg->operation;
-
- switch (op) {
- case PSB_MODE_OPERATION_SET_DC_BASE:
- obj = drm_mode_object_find(dev, obj_id, DRM_MODE_OBJECT_FB);
- if (!obj) {
- dev_dbg(dev->dev, "Invalid FB id %d\n", obj_id);
- return -EINVAL;
- }
-
- drm_fb = obj_to_fb(obj);
- psb_fb = to_psb_fb(drm_fb);
-
- if (gma_power_begin(dev, 0)) {
- REG_WRITE(DSPASURF, psb_fb->gtt->offset);
- REG_READ(DSPASURF);
- gma_power_end(dev);
- } else {
- dev_priv->saveDSPASURF = psb_fb->gtt->offset;
- }
-
- return 0;
- case PSB_MODE_OPERATION_MODE_VALID:
- umode = &arg->mode;
-
- mutex_lock(&dev->mode_config.mutex);
-
- obj = drm_mode_object_find(dev, obj_id,
- DRM_MODE_OBJECT_CONNECTOR);
- if (!obj) {
- ret = -EINVAL;
- goto mode_op_out;
- }
-
- connector = obj_to_connector(obj);
-
- mode = drm_mode_create(dev);
- if (!mode) {
- ret = -ENOMEM;
- goto mode_op_out;
- }
-
- /* drm_crtc_convert_umode(mode, umode); */
- {
- mode->clock = umode->clock;
- mode->hdisplay = umode->hdisplay;
- mode->hsync_start = umode->hsync_start;
- mode->hsync_end = umode->hsync_end;
- mode->htotal = umode->htotal;
- mode->hskew = umode->hskew;
- mode->vdisplay = umode->vdisplay;
- mode->vsync_start = umode->vsync_start;
- mode->vsync_end = umode->vsync_end;
- mode->vtotal = umode->vtotal;
- mode->vscan = umode->vscan;
- mode->vrefresh = umode->vrefresh;
- mode->flags = umode->flags;
- mode->type = umode->type;
- strncpy(mode->name, umode->name, DRM_DISPLAY_MODE_LEN);
- mode->name[DRM_DISPLAY_MODE_LEN-1] = 0;
- }
-
- connector_funcs = (struct drm_connector_helper_funcs *)
- connector->helper_private;
-
- if (connector_funcs->mode_valid) {
- resp = connector_funcs->mode_valid(connector, mode);
- arg->data = (void *)resp;
- }
-
- /*do some clean up work*/
- if (mode)
- drm_mode_destroy(dev, mode);
-mode_op_out:
- mutex_unlock(&dev->mode_config.mutex);
- return ret;
-
- default:
- dev_dbg(dev->dev, "Unsupported psb mode operation\n");
- return -EOPNOTSUPP;
- }
-
- return 0;
-}
-
-static int psb_stolen_memory_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_psb_private *dev_priv = psb_priv(dev);
- struct drm_psb_stolen_memory_arg *arg = data;
-
- arg->base = dev_priv->stolen_base;
- arg->size = dev_priv->vram_stolen_size;
-
- return 0;
-}
-
-/* FIXME: needs Medfield changes */
-static int psb_register_rw_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_psb_private *dev_priv = psb_priv(dev);
- struct drm_psb_register_rw_arg *arg = data;
- bool usage = arg->b_force_hw_on ? true : false;
-
- if (arg->display_write_mask != 0) {
- if (gma_power_begin(dev, usage)) {
- if (arg->display_write_mask & REGRWBITS_PFIT_CONTROLS)
- PSB_WVDC32(arg->display.pfit_controls,
- PFIT_CONTROL);
- if (arg->display_write_mask &
- REGRWBITS_PFIT_AUTOSCALE_RATIOS)
- PSB_WVDC32(arg->display.pfit_autoscale_ratios,
- PFIT_AUTO_RATIOS);
- if (arg->display_write_mask &
- REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS)
- PSB_WVDC32(
- arg->display.pfit_programmed_scale_ratios,
- PFIT_PGM_RATIOS);
- if (arg->display_write_mask & REGRWBITS_PIPEASRC)
- PSB_WVDC32(arg->display.pipeasrc,
- PIPEASRC);
- if (arg->display_write_mask & REGRWBITS_PIPEBSRC)
- PSB_WVDC32(arg->display.pipebsrc,
- PIPEBSRC);
- if (arg->display_write_mask & REGRWBITS_VTOTAL_A)
- PSB_WVDC32(arg->display.vtotal_a,
- VTOTAL_A);
- if (arg->display_write_mask & REGRWBITS_VTOTAL_B)
- PSB_WVDC32(arg->display.vtotal_b,
- VTOTAL_B);
- gma_power_end(dev);
- } else {
- if (arg->display_write_mask & REGRWBITS_PFIT_CONTROLS)
- dev_priv->savePFIT_CONTROL =
- arg->display.pfit_controls;
- if (arg->display_write_mask &
- REGRWBITS_PFIT_AUTOSCALE_RATIOS)
- dev_priv->savePFIT_AUTO_RATIOS =
- arg->display.pfit_autoscale_ratios;
- if (arg->display_write_mask &
- REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS)
- dev_priv->savePFIT_PGM_RATIOS =
- arg->display.pfit_programmed_scale_ratios;
- if (arg->display_write_mask & REGRWBITS_PIPEASRC)
- dev_priv->savePIPEASRC = arg->display.pipeasrc;
- if (arg->display_write_mask & REGRWBITS_PIPEBSRC)
- dev_priv->savePIPEBSRC = arg->display.pipebsrc;
- if (arg->display_write_mask & REGRWBITS_VTOTAL_A)
- dev_priv->saveVTOTAL_A = arg->display.vtotal_a;
- if (arg->display_write_mask & REGRWBITS_VTOTAL_B)
- dev_priv->saveVTOTAL_B = arg->display.vtotal_b;
- }
- }
-
- if (arg->display_read_mask != 0) {
- if (gma_power_begin(dev, usage)) {
- if (arg->display_read_mask &
- REGRWBITS_PFIT_CONTROLS)
- arg->display.pfit_controls =
- PSB_RVDC32(PFIT_CONTROL);
- if (arg->display_read_mask &
- REGRWBITS_PFIT_AUTOSCALE_RATIOS)
- arg->display.pfit_autoscale_ratios =
- PSB_RVDC32(PFIT_AUTO_RATIOS);
- if (arg->display_read_mask &
- REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS)
- arg->display.pfit_programmed_scale_ratios =
- PSB_RVDC32(PFIT_PGM_RATIOS);
- if (arg->display_read_mask & REGRWBITS_PIPEASRC)
- arg->display.pipeasrc = PSB_RVDC32(PIPEASRC);
- if (arg->display_read_mask & REGRWBITS_PIPEBSRC)
- arg->display.pipebsrc = PSB_RVDC32(PIPEBSRC);
- if (arg->display_read_mask & REGRWBITS_VTOTAL_A)
- arg->display.vtotal_a = PSB_RVDC32(VTOTAL_A);
- if (arg->display_read_mask & REGRWBITS_VTOTAL_B)
- arg->display.vtotal_b = PSB_RVDC32(VTOTAL_B);
- gma_power_end(dev);
- } else {
- if (arg->display_read_mask &
- REGRWBITS_PFIT_CONTROLS)
- arg->display.pfit_controls =
- dev_priv->savePFIT_CONTROL;
- if (arg->display_read_mask &
- REGRWBITS_PFIT_AUTOSCALE_RATIOS)
- arg->display.pfit_autoscale_ratios =
- dev_priv->savePFIT_AUTO_RATIOS;
- if (arg->display_read_mask &
- REGRWBITS_PFIT_PROGRAMMED_SCALE_RATIOS)
- arg->display.pfit_programmed_scale_ratios =
- dev_priv->savePFIT_PGM_RATIOS;
- if (arg->display_read_mask & REGRWBITS_PIPEASRC)
- arg->display.pipeasrc = dev_priv->savePIPEASRC;
- if (arg->display_read_mask & REGRWBITS_PIPEBSRC)
- arg->display.pipebsrc = dev_priv->savePIPEBSRC;
- if (arg->display_read_mask & REGRWBITS_VTOTAL_A)
- arg->display.vtotal_a = dev_priv->saveVTOTAL_A;
- if (arg->display_read_mask & REGRWBITS_VTOTAL_B)
- arg->display.vtotal_b = dev_priv->saveVTOTAL_B;
- }
- }
-
- if (arg->overlay_write_mask != 0) {
- if (gma_power_begin(dev, usage)) {
- if (arg->overlay_write_mask & OV_REGRWBITS_OGAM_ALL) {
- PSB_WVDC32(arg->overlay.OGAMC5, OV_OGAMC5);
- PSB_WVDC32(arg->overlay.OGAMC4, OV_OGAMC4);
- PSB_WVDC32(arg->overlay.OGAMC3, OV_OGAMC3);
- PSB_WVDC32(arg->overlay.OGAMC2, OV_OGAMC2);
- PSB_WVDC32(arg->overlay.OGAMC1, OV_OGAMC1);
- PSB_WVDC32(arg->overlay.OGAMC0, OV_OGAMC0);
- }
- if (arg->overlay_write_mask & OVC_REGRWBITS_OGAM_ALL) {
- PSB_WVDC32(arg->overlay.OGAMC5, OVC_OGAMC5);
- PSB_WVDC32(arg->overlay.OGAMC4, OVC_OGAMC4);
- PSB_WVDC32(arg->overlay.OGAMC3, OVC_OGAMC3);
- PSB_WVDC32(arg->overlay.OGAMC2, OVC_OGAMC2);
- PSB_WVDC32(arg->overlay.OGAMC1, OVC_OGAMC1);
- PSB_WVDC32(arg->overlay.OGAMC0, OVC_OGAMC0);
- }
-
- if (arg->overlay_write_mask & OV_REGRWBITS_OVADD) {
- PSB_WVDC32(arg->overlay.OVADD, OV_OVADD);
-
- if (arg->overlay.b_wait_vblank) {
- /* Wait for 20ms.*/
- unsigned long vblank_timeout = jiffies
- + HZ/50;
- uint32_t temp;
- while (time_before_eq(jiffies,
- vblank_timeout)) {
- temp = PSB_RVDC32(OV_DOVASTA);
- if ((temp & (0x1 << 31)) != 0)
- break;
- cpu_relax();
- }
- }
- }
- if (arg->overlay_write_mask & OVC_REGRWBITS_OVADD) {
- PSB_WVDC32(arg->overlay.OVADD, OVC_OVADD);
- if (arg->overlay.b_wait_vblank) {
- /* Wait for 20ms.*/
- unsigned long vblank_timeout =
- jiffies + HZ/50;
- uint32_t temp;
- while (time_before_eq(jiffies,
- vblank_timeout)) {
- temp = PSB_RVDC32(OVC_DOVCSTA);
- if ((temp & (0x1 << 31)) != 0)
- break;
- cpu_relax();
- }
- }
- }
- gma_power_end(dev);
- } else {
- if (arg->overlay_write_mask & OV_REGRWBITS_OGAM_ALL) {
- dev_priv->saveOV_OGAMC5 = arg->overlay.OGAMC5;
- dev_priv->saveOV_OGAMC4 = arg->overlay.OGAMC4;
- dev_priv->saveOV_OGAMC3 = arg->overlay.OGAMC3;
- dev_priv->saveOV_OGAMC2 = arg->overlay.OGAMC2;
- dev_priv->saveOV_OGAMC1 = arg->overlay.OGAMC1;
- dev_priv->saveOV_OGAMC0 = arg->overlay.OGAMC0;
- }
- if (arg->overlay_write_mask & OVC_REGRWBITS_OGAM_ALL) {
- dev_priv->saveOVC_OGAMC5 = arg->overlay.OGAMC5;
- dev_priv->saveOVC_OGAMC4 = arg->overlay.OGAMC4;
- dev_priv->saveOVC_OGAMC3 = arg->overlay.OGAMC3;
- dev_priv->saveOVC_OGAMC2 = arg->overlay.OGAMC2;
- dev_priv->saveOVC_OGAMC1 = arg->overlay.OGAMC1;
- dev_priv->saveOVC_OGAMC0 = arg->overlay.OGAMC0;
- }
- if (arg->overlay_write_mask & OV_REGRWBITS_OVADD)
- dev_priv->saveOV_OVADD = arg->overlay.OVADD;
- if (arg->overlay_write_mask & OVC_REGRWBITS_OVADD)
- dev_priv->saveOVC_OVADD = arg->overlay.OVADD;
- }
- }
-
- if (arg->overlay_read_mask != 0) {
- if (gma_power_begin(dev, usage)) {
- if (arg->overlay_read_mask & OV_REGRWBITS_OGAM_ALL) {
- arg->overlay.OGAMC5 = PSB_RVDC32(OV_OGAMC5);
- arg->overlay.OGAMC4 = PSB_RVDC32(OV_OGAMC4);
- arg->overlay.OGAMC3 = PSB_RVDC32(OV_OGAMC3);
- arg->overlay.OGAMC2 = PSB_RVDC32(OV_OGAMC2);
- arg->overlay.OGAMC1 = PSB_RVDC32(OV_OGAMC1);
- arg->overlay.OGAMC0 = PSB_RVDC32(OV_OGAMC0);
- }
- if (arg->overlay_read_mask & OVC_REGRWBITS_OGAM_ALL) {
- arg->overlay.OGAMC5 = PSB_RVDC32(OVC_OGAMC5);
- arg->overlay.OGAMC4 = PSB_RVDC32(OVC_OGAMC4);
- arg->overlay.OGAMC3 = PSB_RVDC32(OVC_OGAMC3);
- arg->overlay.OGAMC2 = PSB_RVDC32(OVC_OGAMC2);
- arg->overlay.OGAMC1 = PSB_RVDC32(OVC_OGAMC1);
- arg->overlay.OGAMC0 = PSB_RVDC32(OVC_OGAMC0);
- }
- if (arg->overlay_read_mask & OV_REGRWBITS_OVADD)
- arg->overlay.OVADD = PSB_RVDC32(OV_OVADD);
- if (arg->overlay_read_mask & OVC_REGRWBITS_OVADD)
- arg->overlay.OVADD = PSB_RVDC32(OVC_OVADD);
- gma_power_end(dev);
- } else {
- if (arg->overlay_read_mask & OV_REGRWBITS_OGAM_ALL) {
- arg->overlay.OGAMC5 = dev_priv->saveOV_OGAMC5;
- arg->overlay.OGAMC4 = dev_priv->saveOV_OGAMC4;
- arg->overlay.OGAMC3 = dev_priv->saveOV_OGAMC3;
- arg->overlay.OGAMC2 = dev_priv->saveOV_OGAMC2;
- arg->overlay.OGAMC1 = dev_priv->saveOV_OGAMC1;
- arg->overlay.OGAMC0 = dev_priv->saveOV_OGAMC0;
- }
- if (arg->overlay_read_mask & OVC_REGRWBITS_OGAM_ALL) {
- arg->overlay.OGAMC5 = dev_priv->saveOVC_OGAMC5;
- arg->overlay.OGAMC4 = dev_priv->saveOVC_OGAMC4;
- arg->overlay.OGAMC3 = dev_priv->saveOVC_OGAMC3;
- arg->overlay.OGAMC2 = dev_priv->saveOVC_OGAMC2;
- arg->overlay.OGAMC1 = dev_priv->saveOVC_OGAMC1;
- arg->overlay.OGAMC0 = dev_priv->saveOVC_OGAMC0;
- }
- if (arg->overlay_read_mask & OV_REGRWBITS_OVADD)
- arg->overlay.OVADD = dev_priv->saveOV_OVADD;
- if (arg->overlay_read_mask & OVC_REGRWBITS_OVADD)
- arg->overlay.OVADD = dev_priv->saveOVC_OVADD;
- }
- }
-
- if (arg->sprite_enable_mask != 0) {
- if (gma_power_begin(dev, usage)) {
- PSB_WVDC32(0x1F3E, DSPARB);
- PSB_WVDC32(arg->sprite.dspa_control
- | PSB_RVDC32(DSPACNTR), DSPACNTR);
- PSB_WVDC32(arg->sprite.dspa_key_value, DSPAKEYVAL);
- PSB_WVDC32(arg->sprite.dspa_key_mask, DSPAKEYMASK);
- PSB_WVDC32(PSB_RVDC32(DSPASURF), DSPASURF);
- PSB_RVDC32(DSPASURF);
- PSB_WVDC32(arg->sprite.dspc_control, DSPCCNTR);
- PSB_WVDC32(arg->sprite.dspc_stride, DSPCSTRIDE);
- PSB_WVDC32(arg->sprite.dspc_position, DSPCPOS);
- PSB_WVDC32(arg->sprite.dspc_linear_offset, DSPCLINOFF);
- PSB_WVDC32(arg->sprite.dspc_size, DSPCSIZE);
- PSB_WVDC32(arg->sprite.dspc_surface, DSPCSURF);
- PSB_RVDC32(DSPCSURF);
- gma_power_end(dev);
- }
- }
-
- if (arg->sprite_disable_mask != 0) {
- if (gma_power_begin(dev, usage)) {
- PSB_WVDC32(0x3F3E, DSPARB);
- PSB_WVDC32(0x0, DSPCCNTR);
- PSB_WVDC32(arg->sprite.dspc_surface, DSPCSURF);
- PSB_RVDC32(DSPCSURF);
- gma_power_end(dev);
- }
- }
-
- if (arg->subpicture_enable_mask != 0) {
- if (gma_power_begin(dev, usage)) {
- uint32_t temp;
- if (arg->subpicture_enable_mask & REGRWBITS_DSPACNTR) {
- temp = PSB_RVDC32(DSPACNTR);
- temp &= ~DISPPLANE_PIXFORMAT_MASK;
- temp &= ~DISPPLANE_BOTTOM;
- temp |= DISPPLANE_32BPP;
- PSB_WVDC32(temp, DSPACNTR);
-
- temp = PSB_RVDC32(DSPABASE);
- PSB_WVDC32(temp, DSPABASE);
- PSB_RVDC32(DSPABASE);
- temp = PSB_RVDC32(DSPASURF);
- PSB_WVDC32(temp, DSPASURF);
- PSB_RVDC32(DSPASURF);
- }
- if (arg->subpicture_enable_mask & REGRWBITS_DSPBCNTR) {
- temp = PSB_RVDC32(DSPBCNTR);
- temp &= ~DISPPLANE_PIXFORMAT_MASK;
- temp &= ~DISPPLANE_BOTTOM;
- temp |= DISPPLANE_32BPP;
- PSB_WVDC32(temp, DSPBCNTR);
-
- temp = PSB_RVDC32(DSPBBASE);
- PSB_WVDC32(temp, DSPBBASE);
- PSB_RVDC32(DSPBBASE);
- temp = PSB_RVDC32(DSPBSURF);
- PSB_WVDC32(temp, DSPBSURF);
- PSB_RVDC32(DSPBSURF);
- }
- if (arg->subpicture_enable_mask & REGRWBITS_DSPCCNTR) {
- temp = PSB_RVDC32(DSPCCNTR);
- temp &= ~DISPPLANE_PIXFORMAT_MASK;
- temp &= ~DISPPLANE_BOTTOM;
- temp |= DISPPLANE_32BPP;
- PSB_WVDC32(temp, DSPCCNTR);
-
- temp = PSB_RVDC32(DSPCBASE);
- PSB_WVDC32(temp, DSPCBASE);
- PSB_RVDC32(DSPCBASE);
- temp = PSB_RVDC32(DSPCSURF);
- PSB_WVDC32(temp, DSPCSURF);
- PSB_RVDC32(DSPCSURF);
- }
- gma_power_end(dev);
- }
- }
-
- if (arg->subpicture_disable_mask != 0) {
- if (gma_power_begin(dev, usage)) {
- uint32_t temp;
- if (arg->subpicture_disable_mask & REGRWBITS_DSPACNTR) {
- temp = PSB_RVDC32(DSPACNTR);
- temp &= ~DISPPLANE_PIXFORMAT_MASK;
- temp |= DISPPLANE_32BPP_NO_ALPHA;
- PSB_WVDC32(temp, DSPACNTR);
-
- temp = PSB_RVDC32(DSPABASE);
- PSB_WVDC32(temp, DSPABASE);
- PSB_RVDC32(DSPABASE);
- temp = PSB_RVDC32(DSPASURF);
- PSB_WVDC32(temp, DSPASURF);
- PSB_RVDC32(DSPASURF);
- }
- if (arg->subpicture_disable_mask & REGRWBITS_DSPBCNTR) {
- temp = PSB_RVDC32(DSPBCNTR);
- temp &= ~DISPPLANE_PIXFORMAT_MASK;
- temp |= DISPPLANE_32BPP_NO_ALPHA;
- PSB_WVDC32(temp, DSPBCNTR);
-
- temp = PSB_RVDC32(DSPBBASE);
- PSB_WVDC32(temp, DSPBBASE);
- PSB_RVDC32(DSPBBASE);
- temp = PSB_RVDC32(DSPBSURF);
- PSB_WVDC32(temp, DSPBSURF);
- PSB_RVDC32(DSPBSURF);
- }
- if (arg->subpicture_disable_mask & REGRWBITS_DSPCCNTR) {
- temp = PSB_RVDC32(DSPCCNTR);
- temp &= ~DISPPLANE_PIXFORMAT_MASK;
- temp |= DISPPLANE_32BPP_NO_ALPHA;
- PSB_WVDC32(temp, DSPCCNTR);
-
- temp = PSB_RVDC32(DSPCBASE);
- PSB_WVDC32(temp, DSPCBASE);
- PSB_RVDC32(DSPCBASE);
- temp = PSB_RVDC32(DSPCSURF);
- PSB_WVDC32(temp, DSPCSURF);
- PSB_RVDC32(DSPCSURF);
- }
- gma_power_end(dev);
- }
- }
-
- return 0;
-}
-
-static int psb_driver_open(struct drm_device *dev, struct drm_file *priv)
-{
- return 0;
-}
-
-static void psb_driver_close(struct drm_device *dev, struct drm_file *priv)
-{
-}
-
-static long psb_unlocked_ioctl(struct file *filp, unsigned int cmd,
- unsigned long arg)
-{
- struct drm_file *file_priv = filp->private_data;
- struct drm_device *dev = file_priv->minor->dev;
- int ret;
-
- pm_runtime_forbid(dev->dev);
- ret = drm_ioctl(filp, cmd, arg);
- pm_runtime_allow(dev->dev);
- return ret;
- /* FIXME: do we need to wrap the other side of this */
-}
-
-
-/* When a client dies:
- * - Check for and clean up flipped page state
- */
-void psb_driver_preclose(struct drm_device *dev, struct drm_file *priv)
-{
-}
-
-static void psb_remove(struct pci_dev *pdev)
-{
- struct drm_device *dev = pci_get_drvdata(pdev);
- drm_put_dev(dev);
-}
-
-static const struct dev_pm_ops psb_pm_ops = {
- .suspend = gma_power_suspend,
- .resume = gma_power_resume,
- .freeze = gma_power_suspend,
- .thaw = gma_power_resume,
- .poweroff = gma_power_suspend,
- .restore = gma_power_resume,
- .runtime_suspend = psb_runtime_suspend,
- .runtime_resume = psb_runtime_resume,
- .runtime_idle = psb_runtime_idle,
-};
-
-static struct vm_operations_struct psb_gem_vm_ops = {
- .fault = psb_gem_fault,
- .open = drm_gem_vm_open,
- .close = drm_gem_vm_close,
-};
-
-static const struct file_operations gma500_driver_fops = {
- .owner = THIS_MODULE,
- .open = drm_open,
- .release = drm_release,
- .unlocked_ioctl = psb_unlocked_ioctl,
- .mmap = drm_gem_mmap,
- .poll = drm_poll,
- .fasync = drm_fasync,
- .read = drm_read,
-};
-
-static struct drm_driver driver = {
- .driver_features = DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | \
- DRIVER_IRQ_VBL | DRIVER_MODESET | DRIVER_GEM ,
- .load = psb_driver_load,
- .unload = psb_driver_unload,
-
- .ioctls = psb_ioctls,
- .num_ioctls = DRM_ARRAY_SIZE(psb_ioctls),
- .device_is_agp = psb_driver_device_is_agp,
- .irq_preinstall = psb_irq_preinstall,
- .irq_postinstall = psb_irq_postinstall,
- .irq_uninstall = psb_irq_uninstall,
- .irq_handler = psb_irq_handler,
- .enable_vblank = psb_enable_vblank,
- .disable_vblank = psb_disable_vblank,
- .get_vblank_counter = psb_get_vblank_counter,
- .lastclose = psb_lastclose,
- .open = psb_driver_open,
- .preclose = psb_driver_preclose,
- .postclose = psb_driver_close,
- .reclaim_buffers = drm_core_reclaim_buffers,
-
- .gem_init_object = psb_gem_init_object,
- .gem_free_object = psb_gem_free_object,
- .gem_vm_ops = &psb_gem_vm_ops,
- .dumb_create = psb_gem_dumb_create,
- .dumb_map_offset = psb_gem_dumb_map_gtt,
- .dumb_destroy = psb_gem_dumb_destroy,
- .fops = &gma500_driver_fops,
- .name = DRIVER_NAME,
- .desc = DRIVER_DESC,
- .date = PSB_DRM_DRIVER_DATE,
- .major = PSB_DRM_DRIVER_MAJOR,
- .minor = PSB_DRM_DRIVER_MINOR,
- .patchlevel = PSB_DRM_DRIVER_PATCHLEVEL
-};
-
-static struct pci_driver psb_pci_driver = {
- .name = DRIVER_NAME,
- .id_table = pciidlist,
- .probe = psb_probe,
- .remove = psb_remove,
- .driver.pm = &psb_pm_ops,
-};
-
-static int psb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- return drm_get_pci_dev(pdev, ent, &driver);
-}
-
-static int __init psb_init(void)
-{
- return drm_pci_init(&driver, &psb_pci_driver);
-}
-
-static void __exit psb_exit(void)
-{
- drm_pci_exit(&driver, &psb_pci_driver);
-}
-
-late_initcall(psb_init);
-module_exit(psb_exit);
-
-MODULE_AUTHOR("Alan Cox <alan@linux.intel.com> and others");
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2007-2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-#ifndef _PSB_DRV_H_
-#define _PSB_DRV_H_
-
-#include <linux/kref.h>
-
-#include <drm/drmP.h>
-#include "drm_global.h"
-#include "gem_glue.h"
-#include "psb_drm.h"
-#include "psb_reg.h"
-#include "psb_intel_drv.h"
-#include "gtt.h"
-#include "power.h"
-#include "mrst.h"
-#include "medfield.h"
-
-/* Append new drm mode definition here, align with libdrm definition */
-#define DRM_MODE_SCALE_NO_SCALE 2
-
-enum {
- CHIP_PSB_8108 = 0, /* Poulsbo */
- CHIP_PSB_8109 = 1, /* Poulsbo */
- CHIP_MRST_4100 = 2, /* Moorestown/Oaktrail */
- CHIP_MFLD_0130 = 3, /* Medfield */
-};
-
-#define IS_PSB(dev) (((dev)->pci_device & 0xfffe) == 0x8108)
-#define IS_MRST(dev) (((dev)->pci_device & 0xfffc) == 0x4100)
-#define IS_MFLD(dev) (((dev)->pci_device & 0xfff8) == 0x0130)
-
-/*
- * Driver definitions
- */
-
-#define DRIVER_NAME "gma500"
-#define DRIVER_DESC "DRM driver for the Intel GMA500"
-
-#define PSB_DRM_DRIVER_DATE "2011-06-06"
-#define PSB_DRM_DRIVER_MAJOR 1
-#define PSB_DRM_DRIVER_MINOR 0
-#define PSB_DRM_DRIVER_PATCHLEVEL 0
-
-/*
- * Hardware offsets
- */
-#define PSB_VDC_OFFSET 0x00000000
-#define PSB_VDC_SIZE 0x000080000
-#define MRST_MMIO_SIZE 0x0000C0000
-#define MDFLD_MMIO_SIZE 0x000100000
-#define PSB_SGX_SIZE 0x8000
-#define PSB_SGX_OFFSET 0x00040000
-#define MRST_SGX_OFFSET 0x00080000
-/*
- * PCI resource identifiers
- */
-#define PSB_MMIO_RESOURCE 0
-#define PSB_GATT_RESOURCE 2
-#define PSB_GTT_RESOURCE 3
-/*
- * PCI configuration
- */
-#define PSB_GMCH_CTRL 0x52
-#define PSB_BSM 0x5C
-#define _PSB_GMCH_ENABLED 0x4
-#define PSB_PGETBL_CTL 0x2020
-#define _PSB_PGETBL_ENABLED 0x00000001
-#define PSB_SGX_2D_SLAVE_PORT 0x4000
-
-/* To get rid of */
-#define PSB_TT_PRIV0_LIMIT (256*1024*1024)
-#define PSB_TT_PRIV0_PLIMIT (PSB_TT_PRIV0_LIMIT >> PAGE_SHIFT)
-
-/*
- * SGX side MMU definitions (these can probably go)
- */
-
-/*
- * Flags for external memory type field.
- */
-#define PSB_MMU_CACHED_MEMORY 0x0001 /* Bind to MMU only */
-#define PSB_MMU_RO_MEMORY 0x0002 /* MMU RO memory */
-#define PSB_MMU_WO_MEMORY 0x0004 /* MMU WO memory */
-/*
- * PTE's and PDE's
- */
-#define PSB_PDE_MASK 0x003FFFFF
-#define PSB_PDE_SHIFT 22
-#define PSB_PTE_SHIFT 12
-/*
- * Cache control
- */
-#define PSB_PTE_VALID 0x0001 /* PTE / PDE valid */
-#define PSB_PTE_WO 0x0002 /* Write only */
-#define PSB_PTE_RO 0x0004 /* Read only */
-#define PSB_PTE_CACHED 0x0008 /* CPU cache coherent */
-
-/*
- * VDC registers and bits
- */
-#define PSB_MSVDX_CLOCKGATING 0x2064
-#define PSB_TOPAZ_CLOCKGATING 0x2068
-#define PSB_HWSTAM 0x2098
-#define PSB_INSTPM 0x20C0
-#define PSB_INT_IDENTITY_R 0x20A4
-#define _MDFLD_PIPEC_EVENT_FLAG (1<<2)
-#define _MDFLD_PIPEC_VBLANK_FLAG (1<<3)
-#define _PSB_DPST_PIPEB_FLAG (1<<4)
-#define _MDFLD_PIPEB_EVENT_FLAG (1<<4)
-#define _PSB_VSYNC_PIPEB_FLAG (1<<5)
-#define _PSB_DPST_PIPEA_FLAG (1<<6)
-#define _PSB_PIPEA_EVENT_FLAG (1<<6)
-#define _PSB_VSYNC_PIPEA_FLAG (1<<7)
-#define _MDFLD_MIPIA_FLAG (1<<16)
-#define _MDFLD_MIPIC_FLAG (1<<17)
-#define _PSB_IRQ_SGX_FLAG (1<<18)
-#define _PSB_IRQ_MSVDX_FLAG (1<<19)
-#define _LNC_IRQ_TOPAZ_FLAG (1<<20)
-
-#define _PSB_PIPE_EVENT_FLAG (_PSB_VSYNC_PIPEA_FLAG | \
- _PSB_VSYNC_PIPEB_FLAG)
-
-/* This flag includes all the display IRQ bits excepts the vblank irqs. */
-#define _MDFLD_DISP_ALL_IRQ_FLAG (_MDFLD_PIPEC_EVENT_FLAG | \
- _MDFLD_PIPEB_EVENT_FLAG | \
- _PSB_PIPEA_EVENT_FLAG | \
- _PSB_VSYNC_PIPEA_FLAG | \
- _MDFLD_MIPIA_FLAG | \
- _MDFLD_MIPIC_FLAG)
-#define PSB_INT_IDENTITY_R 0x20A4
-#define PSB_INT_MASK_R 0x20A8
-#define PSB_INT_ENABLE_R 0x20A0
-
-#define _PSB_MMU_ER_MASK 0x0001FF00
-#define _PSB_MMU_ER_HOST (1 << 16)
-#define GPIOA 0x5010
-#define GPIOB 0x5014
-#define GPIOC 0x5018
-#define GPIOD 0x501c
-#define GPIOE 0x5020
-#define GPIOF 0x5024
-#define GPIOG 0x5028
-#define GPIOH 0x502c
-#define GPIO_CLOCK_DIR_MASK (1 << 0)
-#define GPIO_CLOCK_DIR_IN (0 << 1)
-#define GPIO_CLOCK_DIR_OUT (1 << 1)
-#define GPIO_CLOCK_VAL_MASK (1 << 2)
-#define GPIO_CLOCK_VAL_OUT (1 << 3)
-#define GPIO_CLOCK_VAL_IN (1 << 4)
-#define GPIO_CLOCK_PULLUP_DISABLE (1 << 5)
-#define GPIO_DATA_DIR_MASK (1 << 8)
-#define GPIO_DATA_DIR_IN (0 << 9)
-#define GPIO_DATA_DIR_OUT (1 << 9)
-#define GPIO_DATA_VAL_MASK (1 << 10)
-#define GPIO_DATA_VAL_OUT (1 << 11)
-#define GPIO_DATA_VAL_IN (1 << 12)
-#define GPIO_DATA_PULLUP_DISABLE (1 << 13)
-
-#define VCLK_DIVISOR_VGA0 0x6000
-#define VCLK_DIVISOR_VGA1 0x6004
-#define VCLK_POST_DIV 0x6010
-
-#define PSB_COMM_2D (PSB_ENGINE_2D << 4)
-#define PSB_COMM_3D (PSB_ENGINE_3D << 4)
-#define PSB_COMM_TA (PSB_ENGINE_TA << 4)
-#define PSB_COMM_HP (PSB_ENGINE_HP << 4)
-#define PSB_COMM_USER_IRQ (1024 >> 2)
-#define PSB_COMM_USER_IRQ_LOST (PSB_COMM_USER_IRQ + 1)
-#define PSB_COMM_FW (2048 >> 2)
-
-#define PSB_UIRQ_VISTEST 1
-#define PSB_UIRQ_OOM_REPLY 2
-#define PSB_UIRQ_FIRE_TA_REPLY 3
-#define PSB_UIRQ_FIRE_RASTER_REPLY 4
-
-#define PSB_2D_SIZE (256*1024*1024)
-#define PSB_MAX_RELOC_PAGES 1024
-
-#define PSB_LOW_REG_OFFS 0x0204
-#define PSB_HIGH_REG_OFFS 0x0600
-
-#define PSB_NUM_VBLANKS 2
-
-
-#define PSB_2D_SIZE (256*1024*1024)
-#define PSB_MAX_RELOC_PAGES 1024
-
-#define PSB_LOW_REG_OFFS 0x0204
-#define PSB_HIGH_REG_OFFS 0x0600
-
-#define PSB_NUM_VBLANKS 2
-#define PSB_WATCHDOG_DELAY (DRM_HZ * 2)
-#define PSB_LID_DELAY (DRM_HZ / 10)
-
-#define MDFLD_PNW_B0 0x04
-#define MDFLD_PNW_C0 0x08
-
-#define MDFLD_DSR_2D_3D_0 (1 << 0)
-#define MDFLD_DSR_2D_3D_2 (1 << 1)
-#define MDFLD_DSR_CURSOR_0 (1 << 2)
-#define MDFLD_DSR_CURSOR_2 (1 << 3)
-#define MDFLD_DSR_OVERLAY_0 (1 << 4)
-#define MDFLD_DSR_OVERLAY_2 (1 << 5)
-#define MDFLD_DSR_MIPI_CONTROL (1 << 6)
-#define MDFLD_DSR_DAMAGE_MASK_0 ((1 << 0) | (1 << 2) | (1 << 4))
-#define MDFLD_DSR_DAMAGE_MASK_2 ((1 << 1) | (1 << 3) | (1 << 5))
-#define MDFLD_DSR_2D_3D (MDFLD_DSR_2D_3D_0 | MDFLD_DSR_2D_3D_2)
-
-#define MDFLD_DSR_RR 45
-#define MDFLD_DPU_ENABLE (1 << 31)
-#define MDFLD_DSR_FULLSCREEN (1 << 30)
-#define MDFLD_DSR_DELAY (DRM_HZ / MDFLD_DSR_RR)
-
-#define PSB_PWR_STATE_ON 1
-#define PSB_PWR_STATE_OFF 2
-
-#define PSB_PMPOLICY_NOPM 0
-#define PSB_PMPOLICY_CLOCKGATING 1
-#define PSB_PMPOLICY_POWERDOWN 2
-
-#define PSB_PMSTATE_POWERUP 0
-#define PSB_PMSTATE_CLOCKGATED 1
-#define PSB_PMSTATE_POWERDOWN 2
-#define PSB_PCIx_MSI_ADDR_LOC 0x94
-#define PSB_PCIx_MSI_DATA_LOC 0x98
-
-/* Medfield crystal settings */
-#define KSEL_CRYSTAL_19 1
-#define KSEL_BYPASS_19 5
-#define KSEL_BYPASS_25 6
-#define KSEL_BYPASS_83_100 7
-
-struct opregion_header;
-struct opregion_acpi;
-struct opregion_swsci;
-struct opregion_asle;
-
-struct psb_intel_opregion {
- struct opregion_header *header;
- struct opregion_acpi *acpi;
- struct opregion_swsci *swsci;
- struct opregion_asle *asle;
- int enabled;
-};
-
-struct psb_ops;
-
-struct drm_psb_private {
- struct drm_device *dev;
- const struct psb_ops *ops;
-
- struct psb_gtt gtt;
-
- /* GTT Memory manager */
- struct psb_gtt_mm *gtt_mm;
- struct page *scratch_page;
- u32 *gtt_map;
- uint32_t stolen_base;
- void *vram_addr;
- unsigned long vram_stolen_size;
- int gtt_initialized;
- u16 gmch_ctrl; /* Saved GTT setup */
- u32 pge_ctl;
-
- struct mutex gtt_mutex;
- struct resource *gtt_mem; /* Our PCI resource */
-
- struct psb_mmu_driver *mmu;
- struct psb_mmu_pd *pf_pd;
-
- /*
- * Register base
- */
-
- uint8_t *sgx_reg;
- uint8_t *vdc_reg;
- uint32_t gatt_free_offset;
-
- /*
- * Fencing / irq.
- */
-
- uint32_t vdc_irq_mask;
- uint32_t pipestat[PSB_NUM_PIPE];
-
- spinlock_t irqmask_lock;
-
- /*
- * Power
- */
-
- bool suspended;
- bool display_power;
- int display_count;
-
- /*
- * Modesetting
- */
- struct psb_intel_mode_device mode_dev;
-
- struct drm_crtc *plane_to_crtc_mapping[PSB_NUM_PIPE];
- struct drm_crtc *pipe_to_crtc_mapping[PSB_NUM_PIPE];
- uint32_t num_pipe;
-
- /*
- * OSPM info (Power management base) (can go ?)
- */
- uint32_t ospm_base;
-
- /*
- * Sizes info
- */
-
- struct drm_psb_sizes_arg sizes;
-
- u32 fuse_reg_value;
- u32 video_device_fuse;
-
- /* PCI revision ID for B0:D2:F0 */
- uint8_t platform_rev_id;
-
- /*
- * LVDS info
- */
- int backlight_duty_cycle; /* restore backlight to this value */
- bool panel_wants_dither;
- struct drm_display_mode *panel_fixed_mode;
- struct drm_display_mode *lfp_lvds_vbt_mode;
- struct drm_display_mode *sdvo_lvds_vbt_mode;
-
- struct bdb_lvds_backlight *lvds_bl; /* LVDS backlight info from VBT */
- struct psb_intel_i2c_chan *lvds_i2c_bus;
-
- /* Feature bits from the VBIOS */
- unsigned int int_tv_support:1;
- unsigned int lvds_dither:1;
- unsigned int lvds_vbt:1;
- unsigned int int_crt_support:1;
- unsigned int lvds_use_ssc:1;
- int lvds_ssc_freq;
- bool is_lvds_on;
- bool is_mipi_on;
- u32 mipi_ctrl_display;
-
- unsigned int core_freq;
- uint32_t iLVDS_enable;
-
- /* Runtime PM state */
- int rpm_enabled;
-
- /* MID specific */
- struct mrst_vbt vbt_data;
- struct mrst_gct_data gct_data;
-
- /* MIPI Panel type etc */
- int panel_id;
- bool dual_mipi; /* dual display - DPI & DBI */
- bool dpi_panel_on; /* The DPI panel power is on */
- bool dpi_panel_on2; /* The DPI panel power is on */
- bool dbi_panel_on; /* The DBI panel power is on */
- bool dbi_panel_on2; /* The DBI panel power is on */
- u32 dsr_fb_update; /* DSR FB update counter */
-
- /* Moorestown HDMI state */
- struct mrst_hdmi_dev *hdmi_priv;
-
- /* Moorestown pipe config register value cache */
- uint32_t pipeconf;
- uint32_t pipeconf1;
- uint32_t pipeconf2;
-
- /* Moorestown plane control register value cache */
- uint32_t dspcntr;
- uint32_t dspcntr1;
- uint32_t dspcntr2;
-
- /* Moorestown MM backlight cache */
- uint8_t saveBKLTCNT;
- uint8_t saveBKLTREQ;
- uint8_t saveBKLTBRTL;
-
- /*
- * Register state
- */
- uint32_t saveDSPACNTR;
- uint32_t saveDSPBCNTR;
- uint32_t savePIPEACONF;
- uint32_t savePIPEBCONF;
- uint32_t savePIPEASRC;
- uint32_t savePIPEBSRC;
- uint32_t saveFPA0;
- uint32_t saveFPA1;
- uint32_t saveDPLL_A;
- uint32_t saveDPLL_A_MD;
- uint32_t saveHTOTAL_A;
- uint32_t saveHBLANK_A;
- uint32_t saveHSYNC_A;
- uint32_t saveVTOTAL_A;
- uint32_t saveVBLANK_A;
- uint32_t saveVSYNC_A;
- uint32_t saveDSPASTRIDE;
- uint32_t saveDSPASIZE;
- uint32_t saveDSPAPOS;
- uint32_t saveDSPABASE;
- uint32_t saveDSPASURF;
- uint32_t saveDSPASTATUS;
- uint32_t saveFPB0;
- uint32_t saveFPB1;
- uint32_t saveDPLL_B;
- uint32_t saveDPLL_B_MD;
- uint32_t saveHTOTAL_B;
- uint32_t saveHBLANK_B;
- uint32_t saveHSYNC_B;
- uint32_t saveVTOTAL_B;
- uint32_t saveVBLANK_B;
- uint32_t saveVSYNC_B;
- uint32_t saveDSPBSTRIDE;
- uint32_t saveDSPBSIZE;
- uint32_t saveDSPBPOS;
- uint32_t saveDSPBBASE;
- uint32_t saveDSPBSURF;
- uint32_t saveDSPBSTATUS;
- uint32_t saveVCLK_DIVISOR_VGA0;
- uint32_t saveVCLK_DIVISOR_VGA1;
- uint32_t saveVCLK_POST_DIV;
- uint32_t saveVGACNTRL;
- uint32_t saveADPA;
- uint32_t saveLVDS;
- uint32_t saveDVOA;
- uint32_t saveDVOB;
- uint32_t saveDVOC;
- uint32_t savePP_ON;
- uint32_t savePP_OFF;
- uint32_t savePP_CONTROL;
- uint32_t savePP_CYCLE;
- uint32_t savePFIT_CONTROL;
- uint32_t savePaletteA[256];
- uint32_t savePaletteB[256];
- uint32_t saveBLC_PWM_CTL2;
- uint32_t saveBLC_PWM_CTL;
- uint32_t saveCLOCKGATING;
- uint32_t saveDSPARB;
- uint32_t saveDSPATILEOFF;
- uint32_t saveDSPBTILEOFF;
- uint32_t saveDSPAADDR;
- uint32_t saveDSPBADDR;
- uint32_t savePFIT_AUTO_RATIOS;
- uint32_t savePFIT_PGM_RATIOS;
- uint32_t savePP_ON_DELAYS;
- uint32_t savePP_OFF_DELAYS;
- uint32_t savePP_DIVISOR;
- uint32_t saveBSM;
- uint32_t saveVBT;
- uint32_t saveBCLRPAT_A;
- uint32_t saveBCLRPAT_B;
- uint32_t saveDSPALINOFF;
- uint32_t saveDSPBLINOFF;
- uint32_t savePERF_MODE;
- uint32_t saveDSPFW1;
- uint32_t saveDSPFW2;
- uint32_t saveDSPFW3;
- uint32_t saveDSPFW4;
- uint32_t saveDSPFW5;
- uint32_t saveDSPFW6;
- uint32_t saveCHICKENBIT;
- uint32_t saveDSPACURSOR_CTRL;
- uint32_t saveDSPBCURSOR_CTRL;
- uint32_t saveDSPACURSOR_BASE;
- uint32_t saveDSPBCURSOR_BASE;
- uint32_t saveDSPACURSOR_POS;
- uint32_t saveDSPBCURSOR_POS;
- uint32_t save_palette_a[256];
- uint32_t save_palette_b[256];
- uint32_t saveOV_OVADD;
- uint32_t saveOV_OGAMC0;
- uint32_t saveOV_OGAMC1;
- uint32_t saveOV_OGAMC2;
- uint32_t saveOV_OGAMC3;
- uint32_t saveOV_OGAMC4;
- uint32_t saveOV_OGAMC5;
- uint32_t saveOVC_OVADD;
- uint32_t saveOVC_OGAMC0;
- uint32_t saveOVC_OGAMC1;
- uint32_t saveOVC_OGAMC2;
- uint32_t saveOVC_OGAMC3;
- uint32_t saveOVC_OGAMC4;
- uint32_t saveOVC_OGAMC5;
-
- /* MSI reg save */
- uint32_t msi_addr;
- uint32_t msi_data;
-
- /* Medfield specific register save state */
- uint32_t saveHDMIPHYMISCCTL;
- uint32_t saveHDMIB_CONTROL;
- uint32_t saveDSPCCNTR;
- uint32_t savePIPECCONF;
- uint32_t savePIPECSRC;
- uint32_t saveHTOTAL_C;
- uint32_t saveHBLANK_C;
- uint32_t saveHSYNC_C;
- uint32_t saveVTOTAL_C;
- uint32_t saveVBLANK_C;
- uint32_t saveVSYNC_C;
- uint32_t saveDSPCSTRIDE;
- uint32_t saveDSPCSIZE;
- uint32_t saveDSPCPOS;
- uint32_t saveDSPCSURF;
- uint32_t saveDSPCSTATUS;
- uint32_t saveDSPCLINOFF;
- uint32_t saveDSPCTILEOFF;
- uint32_t saveDSPCCURSOR_CTRL;
- uint32_t saveDSPCCURSOR_BASE;
- uint32_t saveDSPCCURSOR_POS;
- uint32_t save_palette_c[256];
- uint32_t saveOV_OVADD_C;
- uint32_t saveOV_OGAMC0_C;
- uint32_t saveOV_OGAMC1_C;
- uint32_t saveOV_OGAMC2_C;
- uint32_t saveOV_OGAMC3_C;
- uint32_t saveOV_OGAMC4_C;
- uint32_t saveOV_OGAMC5_C;
-
- /* DSI register save */
- uint32_t saveDEVICE_READY_REG;
- uint32_t saveINTR_EN_REG;
- uint32_t saveDSI_FUNC_PRG_REG;
- uint32_t saveHS_TX_TIMEOUT_REG;
- uint32_t saveLP_RX_TIMEOUT_REG;
- uint32_t saveTURN_AROUND_TIMEOUT_REG;
- uint32_t saveDEVICE_RESET_REG;
- uint32_t saveDPI_RESOLUTION_REG;
- uint32_t saveHORIZ_SYNC_PAD_COUNT_REG;
- uint32_t saveHORIZ_BACK_PORCH_COUNT_REG;
- uint32_t saveHORIZ_FRONT_PORCH_COUNT_REG;
- uint32_t saveHORIZ_ACTIVE_AREA_COUNT_REG;
- uint32_t saveVERT_SYNC_PAD_COUNT_REG;
- uint32_t saveVERT_BACK_PORCH_COUNT_REG;
- uint32_t saveVERT_FRONT_PORCH_COUNT_REG;
- uint32_t saveHIGH_LOW_SWITCH_COUNT_REG;
- uint32_t saveINIT_COUNT_REG;
- uint32_t saveMAX_RET_PAK_REG;
- uint32_t saveVIDEO_FMT_REG;
- uint32_t saveEOT_DISABLE_REG;
- uint32_t saveLP_BYTECLK_REG;
- uint32_t saveHS_LS_DBI_ENABLE_REG;
- uint32_t saveTXCLKESC_REG;
- uint32_t saveDPHY_PARAM_REG;
- uint32_t saveMIPI_CONTROL_REG;
- uint32_t saveMIPI;
- uint32_t saveMIPI_C;
-
- /* DPST register save */
- uint32_t saveHISTOGRAM_INT_CONTROL_REG;
- uint32_t saveHISTOGRAM_LOGIC_CONTROL_REG;
- uint32_t savePWM_CONTROL_LOGIC;
-
- /*
- * DSI info.
- */
- void * dbi_dsr_info;
- void * dbi_dpu_info;
- void * dsi_configs[2];
- /*
- * LID-Switch
- */
- spinlock_t lid_lock;
- struct timer_list lid_timer;
- struct psb_intel_opregion opregion;
- u32 *lid_state;
- u32 lid_last_state;
-
- /*
- * Watchdog
- */
-
- uint32_t apm_reg;
- uint16_t apm_base;
-
- /*
- * Used for modifying backlight from
- * xrandr -- consider removing and using HAL instead
- */
- struct backlight_device *backlight_device;
- struct drm_property *backlight_property;
- uint32_t blc_adj1;
- uint32_t blc_adj2;
-
- void *fbdev;
- /* DPST state */
- uint32_t dsr_idle_count;
- bool is_in_idle;
- bool dsr_enable;
- void (*exit_idle)(struct drm_device *dev, u32 update_src);
-
- /* 2D acceleration */
- spinlock_t lock_2d;
-
- /* FIXME: Arrays anyone ? */
- struct mdfld_dsi_encoder *encoder0;
- struct mdfld_dsi_encoder *encoder2;
- struct mdfld_dsi_dbi_output * dbi_output;
- struct mdfld_dsi_dbi_output * dbi_output2;
- u32 bpp;
- u32 bpp2;
-
- bool dispstatus;
-};
-
-
-/*
- * Operations for each board type
- */
-
-struct psb_ops {
- const char *name;
- unsigned int accel_2d:1;
- int pipes; /* Number of output pipes */
- int crtcs; /* Number of CRTCs */
- int sgx_offset; /* Base offset of SGX device */
-
- /* Sub functions */
- struct drm_crtc_helper_funcs const *crtc_helper;
- struct drm_crtc_funcs const *crtc_funcs;
-
- /* Setup hooks */
- int (*chip_setup)(struct drm_device *dev);
- void (*chip_teardown)(struct drm_device *dev);
-
- /* Display management hooks */
- int (*output_init)(struct drm_device *dev);
- /* Power management hooks */
- void (*init_pm)(struct drm_device *dev);
- int (*save_regs)(struct drm_device *dev);
- int (*restore_regs)(struct drm_device *dev);
- int (*power_up)(struct drm_device *dev);
- int (*power_down)(struct drm_device *dev);
-
- void (*lvds_bl_power)(struct drm_device *dev, bool on);
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- /* Backlight */
- int (*backlight_init)(struct drm_device *dev);
-#endif
- int i2c_bus; /* I2C bus identifier for Moorestown */
-};
-
-
-
-struct psb_mmu_driver;
-
-extern int drm_crtc_probe_output_modes(struct drm_device *dev, int, int);
-extern int drm_pick_crtcs(struct drm_device *dev);
-
-static inline struct drm_psb_private *psb_priv(struct drm_device *dev)
-{
- return (struct drm_psb_private *) dev->dev_private;
-}
-
-/*
- * MMU stuff.
- */
-
-extern struct psb_mmu_driver *psb_mmu_driver_init(uint8_t __iomem * registers,
- int trap_pagefaults,
- int invalid_type,
- struct drm_psb_private *dev_priv);
-extern void psb_mmu_driver_takedown(struct psb_mmu_driver *driver);
-extern struct psb_mmu_pd *psb_mmu_get_default_pd(struct psb_mmu_driver
- *driver);
-extern void psb_mmu_mirror_gtt(struct psb_mmu_pd *pd, uint32_t mmu_offset,
- uint32_t gtt_start, uint32_t gtt_pages);
-extern struct psb_mmu_pd *psb_mmu_alloc_pd(struct psb_mmu_driver *driver,
- int trap_pagefaults,
- int invalid_type);
-extern void psb_mmu_free_pagedir(struct psb_mmu_pd *pd);
-extern void psb_mmu_flush(struct psb_mmu_driver *driver, int rc_prot);
-extern void psb_mmu_remove_pfn_sequence(struct psb_mmu_pd *pd,
- unsigned long address,
- uint32_t num_pages);
-extern int psb_mmu_insert_pfn_sequence(struct psb_mmu_pd *pd,
- uint32_t start_pfn,
- unsigned long address,
- uint32_t num_pages, int type);
-extern int psb_mmu_virtual_to_pfn(struct psb_mmu_pd *pd, uint32_t virtual,
- unsigned long *pfn);
-
-/*
- * Enable / disable MMU for different requestors.
- */
-
-
-extern void psb_mmu_set_pd_context(struct psb_mmu_pd *pd, int hw_context);
-extern int psb_mmu_insert_pages(struct psb_mmu_pd *pd, struct page **pages,
- unsigned long address, uint32_t num_pages,
- uint32_t desired_tile_stride,
- uint32_t hw_tile_stride, int type);
-extern void psb_mmu_remove_pages(struct psb_mmu_pd *pd,
- unsigned long address, uint32_t num_pages,
- uint32_t desired_tile_stride,
- uint32_t hw_tile_stride);
-/*
- *psb_irq.c
- */
-
-extern irqreturn_t psb_irq_handler(DRM_IRQ_ARGS);
-extern int psb_irq_enable_dpst(struct drm_device *dev);
-extern int psb_irq_disable_dpst(struct drm_device *dev);
-extern void psb_irq_preinstall(struct drm_device *dev);
-extern int psb_irq_postinstall(struct drm_device *dev);
-extern void psb_irq_uninstall(struct drm_device *dev);
-extern void psb_irq_turn_on_dpst(struct drm_device *dev);
-extern void psb_irq_turn_off_dpst(struct drm_device *dev);
-
-extern void psb_irq_uninstall_islands(struct drm_device *dev, int hw_islands);
-extern int psb_vblank_wait2(struct drm_device *dev, unsigned int *sequence);
-extern int psb_vblank_wait(struct drm_device *dev, unsigned int *sequence);
-extern int psb_enable_vblank(struct drm_device *dev, int crtc);
-extern void psb_disable_vblank(struct drm_device *dev, int crtc);
-void
-psb_enable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask);
-
-void
-psb_disable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask);
-
-extern u32 psb_get_vblank_counter(struct drm_device *dev, int crtc);
-
-extern int mdfld_enable_te(struct drm_device *dev, int pipe);
-extern void mdfld_disable_te(struct drm_device *dev, int pipe);
-
-/*
- * intel_opregion.c
- */
-extern int gma_intel_opregion_init(struct drm_device *dev);
-extern int gma_intel_opregion_exit(struct drm_device *dev);
-
-/*
- * framebuffer.c
- */
-extern int psbfb_probed(struct drm_device *dev);
-extern int psbfb_remove(struct drm_device *dev,
- struct drm_framebuffer *fb);
-/*
- * accel_2d.c
- */
-extern void psbfb_copyarea(struct fb_info *info,
- const struct fb_copyarea *region);
-extern int psbfb_sync(struct fb_info *info);
-extern void psb_spank(struct drm_psb_private *dev_priv);
-extern int psb_accel_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file);
-
-/*
- * psb_reset.c
- */
-
-extern void psb_lid_timer_init(struct drm_psb_private *dev_priv);
-extern void psb_lid_timer_takedown(struct drm_psb_private *dev_priv);
-extern void psb_print_pagefault(struct drm_psb_private *dev_priv);
-
-/* modesetting */
-extern void psb_modeset_init(struct drm_device *dev);
-extern void psb_modeset_cleanup(struct drm_device *dev);
-extern int psb_fbdev_init(struct drm_device *dev);
-
-/* backlight.c */
-int gma_backlight_init(struct drm_device *dev);
-void gma_backlight_exit(struct drm_device *dev);
-
-/* mrst_crtc.c */
-extern const struct drm_crtc_helper_funcs mrst_helper_funcs;
-
-/* mrst_lvds.c */
-extern void mrst_lvds_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev);
-
-/* psb_intel_display.c */
-extern const struct drm_crtc_helper_funcs psb_intel_helper_funcs;
-extern const struct drm_crtc_funcs psb_intel_crtc_funcs;
-
-/* psb_intel_lvds.c */
-extern const struct drm_connector_helper_funcs
- psb_intel_lvds_connector_helper_funcs;
-extern const struct drm_connector_funcs psb_intel_lvds_connector_funcs;
-
-/* gem.c */
-extern int psb_gem_init_object(struct drm_gem_object *obj);
-extern void psb_gem_free_object(struct drm_gem_object *obj);
-extern int psb_gem_get_aperture(struct drm_device *dev, void *data,
- struct drm_file *file);
-extern int psb_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
- struct drm_mode_create_dumb *args);
-extern int psb_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
- uint32_t handle);
-extern int psb_gem_dumb_map_gtt(struct drm_file *file, struct drm_device *dev,
- uint32_t handle, uint64_t *offset);
-extern int psb_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
-extern int psb_gem_create_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file);
-extern int psb_gem_mmap_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file);
-
-/* psb_device.c */
-extern const struct psb_ops psb_chip_ops;
-
-/* mrst_device.c */
-extern const struct psb_ops mrst_chip_ops;
-
-/* mdfld_device.c */
-extern const struct psb_ops mdfld_chip_ops;
-
-/* cdv_device.c */
-extern const struct psb_ops cdv_chip_ops;
-
-/*
- * Debug print bits setting
- */
-#define PSB_D_GENERAL (1 << 0)
-#define PSB_D_INIT (1 << 1)
-#define PSB_D_IRQ (1 << 2)
-#define PSB_D_ENTRY (1 << 3)
-/* debug the get H/V BP/FP count */
-#define PSB_D_HV (1 << 4)
-#define PSB_D_DBI_BF (1 << 5)
-#define PSB_D_PM (1 << 6)
-#define PSB_D_RENDER (1 << 7)
-#define PSB_D_REG (1 << 8)
-#define PSB_D_MSVDX (1 << 9)
-#define PSB_D_TOPAZ (1 << 10)
-
-extern int drm_psb_no_fb;
-extern int drm_idle_check_interval;
-
-/*
- * Utilities
- */
-
-static inline u32 MRST_MSG_READ32(uint port, uint offset)
-{
- int mcr = (0xD0<<24) | (port << 16) | (offset << 8);
- uint32_t ret_val = 0;
- struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
- pci_write_config_dword(pci_root, 0xD0, mcr);
- pci_read_config_dword(pci_root, 0xD4, &ret_val);
- pci_dev_put(pci_root);
- return ret_val;
-}
-static inline void MRST_MSG_WRITE32(uint port, uint offset, u32 value)
-{
- int mcr = (0xE0<<24) | (port << 16) | (offset << 8) | 0xF0;
- struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
- pci_write_config_dword(pci_root, 0xD4, value);
- pci_write_config_dword(pci_root, 0xD0, mcr);
- pci_dev_put(pci_root);
-}
-static inline u32 MDFLD_MSG_READ32(uint port, uint offset)
-{
- int mcr = (0x10<<24) | (port << 16) | (offset << 8);
- uint32_t ret_val = 0;
- struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
- pci_write_config_dword(pci_root, 0xD0, mcr);
- pci_read_config_dword(pci_root, 0xD4, &ret_val);
- pci_dev_put(pci_root);
- return ret_val;
-}
-static inline void MDFLD_MSG_WRITE32(uint port, uint offset, u32 value)
-{
- int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
- struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
- pci_write_config_dword(pci_root, 0xD4, value);
- pci_write_config_dword(pci_root, 0xD0, mcr);
- pci_dev_put(pci_root);
-}
-
-static inline uint32_t REGISTER_READ(struct drm_device *dev, uint32_t reg)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- return ioread32(dev_priv->vdc_reg + reg);
-}
-
-#define REG_READ(reg) REGISTER_READ(dev, (reg))
-
-static inline void REGISTER_WRITE(struct drm_device *dev, uint32_t reg,
- uint32_t val)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- iowrite32((val), dev_priv->vdc_reg + (reg));
-}
-
-#define REG_WRITE(reg, val) REGISTER_WRITE(dev, (reg), (val))
-
-static inline void REGISTER_WRITE16(struct drm_device *dev,
- uint32_t reg, uint32_t val)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- iowrite16((val), dev_priv->vdc_reg + (reg));
-}
-
-#define REG_WRITE16(reg, val) REGISTER_WRITE16(dev, (reg), (val))
-
-static inline void REGISTER_WRITE8(struct drm_device *dev,
- uint32_t reg, uint32_t val)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- iowrite8((val), dev_priv->vdc_reg + (reg));
-}
-
-#define REG_WRITE8(reg, val) REGISTER_WRITE8(dev, (reg), (val))
-
-#define PSB_WVDC32(_val, _offs) iowrite32(_val, dev_priv->vdc_reg + (_offs))
-#define PSB_RVDC32(_offs) ioread32(dev_priv->vdc_reg + (_offs))
-
-/* #define TRAP_SGX_PM_FAULT 1 */
-#ifdef TRAP_SGX_PM_FAULT
-#define PSB_RSGX32(_offs) \
-({ \
- if (inl(dev_priv->apm_base + PSB_APM_STS) & 0x3) { \
- printk(KERN_ERR \
- "access sgx when it's off!! (READ) %s, %d\n", \
- __FILE__, __LINE__); \
- melay(1000); \
- } \
- ioread32(dev_priv->sgx_reg + (_offs)); \
-})
-#else
-#define PSB_RSGX32(_offs) ioread32(dev_priv->sgx_reg + (_offs))
-#endif
-#define PSB_WSGX32(_val, _offs) iowrite32(_val, dev_priv->sgx_reg + (_offs))
-
-#define MSVDX_REG_DUMP 0
-
-#define PSB_WMSVDX32(_val, _offs) iowrite32(_val, dev_priv->msvdx_reg + (_offs))
-#define PSB_RMSVDX32(_offs) ioread32(dev_priv->msvdx_reg + (_offs))
-
-#endif
+++ /dev/null
-/*
- * Copyright © 2006-2011 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- */
-
-#include <linux/i2c.h>
-#include <linux/pm_runtime.h>
-
-#include <drm/drmP.h>
-#include "framebuffer.h"
-#include "psb_drv.h"
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "psb_intel_display.h"
-#include "power.h"
-
-#include "mdfld_output.h"
-
-struct psb_intel_clock_t {
- /* given values */
- int n;
- int m1, m2;
- int p1, p2;
- /* derived values */
- int dot;
- int vco;
- int m;
- int p;
-};
-
-struct psb_intel_range_t {
- int min, max;
-};
-
-struct psb_intel_p2_t {
- int dot_limit;
- int p2_slow, p2_fast;
-};
-
-#define INTEL_P2_NUM 2
-
-struct psb_intel_limit_t {
- struct psb_intel_range_t dot, vco, n, m, m1, m2, p, p1;
- struct psb_intel_p2_t p2;
-};
-
-#define I8XX_DOT_MIN 25000
-#define I8XX_DOT_MAX 350000
-#define I8XX_VCO_MIN 930000
-#define I8XX_VCO_MAX 1400000
-#define I8XX_N_MIN 3
-#define I8XX_N_MAX 16
-#define I8XX_M_MIN 96
-#define I8XX_M_MAX 140
-#define I8XX_M1_MIN 18
-#define I8XX_M1_MAX 26
-#define I8XX_M2_MIN 6
-#define I8XX_M2_MAX 16
-#define I8XX_P_MIN 4
-#define I8XX_P_MAX 128
-#define I8XX_P1_MIN 2
-#define I8XX_P1_MAX 33
-#define I8XX_P1_LVDS_MIN 1
-#define I8XX_P1_LVDS_MAX 6
-#define I8XX_P2_SLOW 4
-#define I8XX_P2_FAST 2
-#define I8XX_P2_LVDS_SLOW 14
-#define I8XX_P2_LVDS_FAST 14 /* No fast option */
-#define I8XX_P2_SLOW_LIMIT 165000
-
-#define I9XX_DOT_MIN 20000
-#define I9XX_DOT_MAX 400000
-#define I9XX_VCO_MIN 1400000
-#define I9XX_VCO_MAX 2800000
-#define I9XX_N_MIN 3
-#define I9XX_N_MAX 8
-#define I9XX_M_MIN 70
-#define I9XX_M_MAX 120
-#define I9XX_M1_MIN 10
-#define I9XX_M1_MAX 20
-#define I9XX_M2_MIN 5
-#define I9XX_M2_MAX 9
-#define I9XX_P_SDVO_DAC_MIN 5
-#define I9XX_P_SDVO_DAC_MAX 80
-#define I9XX_P_LVDS_MIN 7
-#define I9XX_P_LVDS_MAX 98
-#define I9XX_P1_MIN 1
-#define I9XX_P1_MAX 8
-#define I9XX_P2_SDVO_DAC_SLOW 10
-#define I9XX_P2_SDVO_DAC_FAST 5
-#define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000
-#define I9XX_P2_LVDS_SLOW 14
-#define I9XX_P2_LVDS_FAST 7
-#define I9XX_P2_LVDS_SLOW_LIMIT 112000
-
-#define INTEL_LIMIT_I8XX_DVO_DAC 0
-#define INTEL_LIMIT_I8XX_LVDS 1
-#define INTEL_LIMIT_I9XX_SDVO_DAC 2
-#define INTEL_LIMIT_I9XX_LVDS 3
-
-static const struct psb_intel_limit_t psb_intel_limits[] = {
- { /* INTEL_LIMIT_I8XX_DVO_DAC */
- .dot = {.min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX},
- .vco = {.min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX},
- .n = {.min = I8XX_N_MIN, .max = I8XX_N_MAX},
- .m = {.min = I8XX_M_MIN, .max = I8XX_M_MAX},
- .m1 = {.min = I8XX_M1_MIN, .max = I8XX_M1_MAX},
- .m2 = {.min = I8XX_M2_MIN, .max = I8XX_M2_MAX},
- .p = {.min = I8XX_P_MIN, .max = I8XX_P_MAX},
- .p1 = {.min = I8XX_P1_MIN, .max = I8XX_P1_MAX},
- .p2 = {.dot_limit = I8XX_P2_SLOW_LIMIT,
- .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST},
- },
- { /* INTEL_LIMIT_I8XX_LVDS */
- .dot = {.min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX},
- .vco = {.min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX},
- .n = {.min = I8XX_N_MIN, .max = I8XX_N_MAX},
- .m = {.min = I8XX_M_MIN, .max = I8XX_M_MAX},
- .m1 = {.min = I8XX_M1_MIN, .max = I8XX_M1_MAX},
- .m2 = {.min = I8XX_M2_MIN, .max = I8XX_M2_MAX},
- .p = {.min = I8XX_P_MIN, .max = I8XX_P_MAX},
- .p1 = {.min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX},
- .p2 = {.dot_limit = I8XX_P2_SLOW_LIMIT,
- .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST},
- },
- { /* INTEL_LIMIT_I9XX_SDVO_DAC */
- .dot = {.min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX},
- .vco = {.min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX},
- .n = {.min = I9XX_N_MIN, .max = I9XX_N_MAX},
- .m = {.min = I9XX_M_MIN, .max = I9XX_M_MAX},
- .m1 = {.min = I9XX_M1_MIN, .max = I9XX_M1_MAX},
- .m2 = {.min = I9XX_M2_MIN, .max = I9XX_M2_MAX},
- .p = {.min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX},
- .p1 = {.min = I9XX_P1_MIN, .max = I9XX_P1_MAX},
- .p2 = {.dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
- .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast =
- I9XX_P2_SDVO_DAC_FAST},
- },
- { /* INTEL_LIMIT_I9XX_LVDS */
- .dot = {.min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX},
- .vco = {.min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX},
- .n = {.min = I9XX_N_MIN, .max = I9XX_N_MAX},
- .m = {.min = I9XX_M_MIN, .max = I9XX_M_MAX},
- .m1 = {.min = I9XX_M1_MIN, .max = I9XX_M1_MAX},
- .m2 = {.min = I9XX_M2_MIN, .max = I9XX_M2_MAX},
- .p = {.min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX},
- .p1 = {.min = I9XX_P1_MIN, .max = I9XX_P1_MAX},
- /* The single-channel range is 25-112Mhz, and dual-channel
- * is 80-224Mhz. Prefer single channel as much as possible.
- */
- .p2 = {.dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
- .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST},
- },
-};
-
-static const struct psb_intel_limit_t *psb_intel_limit(struct drm_crtc *crtc)
-{
- const struct psb_intel_limit_t *limit;
-
- if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &psb_intel_limits[INTEL_LIMIT_I9XX_LVDS];
- else
- limit = &psb_intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
- return limit;
-}
-
-/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
-
-static void i8xx_clock(int refclk, struct psb_intel_clock_t *clock)
-{
- clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
- clock->p = clock->p1 * clock->p2;
- clock->vco = refclk * clock->m / (clock->n + 2);
- clock->dot = clock->vco / clock->p;
-}
-
-/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */
-
-static void i9xx_clock(int refclk, struct psb_intel_clock_t *clock)
-{
- clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
- clock->p = clock->p1 * clock->p2;
- clock->vco = refclk * clock->m / (clock->n + 2);
- clock->dot = clock->vco / clock->p;
-}
-
-static void psb_intel_clock(struct drm_device *dev, int refclk,
- struct psb_intel_clock_t *clock)
-{
- return i9xx_clock(refclk, clock);
-}
-
-/**
- * Returns whether any output on the specified pipe is of the specified type
- */
-bool psb_intel_pipe_has_type(struct drm_crtc *crtc, int type)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_mode_config *mode_config = &dev->mode_config;
- struct drm_connector *l_entry;
-
- list_for_each_entry(l_entry, &mode_config->connector_list, head) {
- if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(l_entry);
- if (psb_intel_output->type == type)
- return true;
- }
- }
- return false;
-}
-
-#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; }
-/**
- * Returns whether the given set of divisors are valid for a given refclk with
- * the given connectors.
- */
-
-static bool psb_intel_PLL_is_valid(struct drm_crtc *crtc,
- struct psb_intel_clock_t *clock)
-{
- const struct psb_intel_limit_t *limit = psb_intel_limit(crtc);
-
- if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
- INTELPllInvalid("p1 out of range\n");
- if (clock->p < limit->p.min || limit->p.max < clock->p)
- INTELPllInvalid("p out of range\n");
- if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
- INTELPllInvalid("m2 out of range\n");
- if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
- INTELPllInvalid("m1 out of range\n");
- if (clock->m1 <= clock->m2)
- INTELPllInvalid("m1 <= m2\n");
- if (clock->m < limit->m.min || limit->m.max < clock->m)
- INTELPllInvalid("m out of range\n");
- if (clock->n < limit->n.min || limit->n.max < clock->n)
- INTELPllInvalid("n out of range\n");
- if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
- INTELPllInvalid("vco out of range\n");
- /* XXX: We may need to be checking "Dot clock"
- * depending on the multiplier, connector, etc.,
- * rather than just a single range.
- */
- if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
- INTELPllInvalid("dot out of range\n");
-
- return true;
-}
-
-/**
- * Returns a set of divisors for the desired target clock with the given
- * refclk, or FALSE. The returned values represent the clock equation:
- * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
- */
-static bool psb_intel_find_best_PLL(struct drm_crtc *crtc, int target,
- int refclk,
- struct psb_intel_clock_t *best_clock)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_clock_t clock;
- const struct psb_intel_limit_t *limit = psb_intel_limit(crtc);
- int err = target;
-
- if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
- (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
- /*
- * For LVDS, if the panel is on, just rely on its current
- * settings for dual-channel. We haven't figured out how to
- * reliably set up different single/dual channel state, if we
- * even can.
- */
- if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
-
- memset(best_clock, 0, sizeof(*best_clock));
-
- for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
- clock.m1++) {
- for (clock.m2 = limit->m2.min;
- clock.m2 < clock.m1 && clock.m2 <= limit->m2.max;
- clock.m2++) {
- for (clock.n = limit->n.min;
- clock.n <= limit->n.max; clock.n++) {
- for (clock.p1 = limit->p1.min;
- clock.p1 <= limit->p1.max;
- clock.p1++) {
- int this_err;
-
- psb_intel_clock(dev, refclk, &clock);
-
- if (!psb_intel_PLL_is_valid
- (crtc, &clock))
- continue;
-
- this_err = abs(clock.dot - target);
- if (this_err < err) {
- *best_clock = clock;
- err = this_err;
- }
- }
- }
- }
- }
-
- return err != target;
-}
-
-void psb_intel_wait_for_vblank(struct drm_device *dev)
-{
- /* Wait for 20ms, i.e. one cycle at 50hz. */
- mdelay(20);
-}
-
-int psb_intel_pipe_set_base(struct drm_crtc *crtc,
- int x, int y, struct drm_framebuffer *old_fb)
-{
- struct drm_device *dev = crtc->dev;
- /* struct drm_i915_master_private *master_priv; */
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
- int pipe = psb_intel_crtc->pipe;
- unsigned long start, offset;
- int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE);
- int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
- int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
- u32 dspcntr;
- int ret = 0;
-
- if (!gma_power_begin(dev, true))
- return 0;
-
- /* no fb bound */
- if (!crtc->fb) {
- dev_dbg(dev->dev, "No FB bound\n");
- goto psb_intel_pipe_cleaner;
- }
-
- /* We are displaying this buffer, make sure it is actually loaded
- into the GTT */
- ret = psb_gtt_pin(psbfb->gtt);
- if (ret < 0)
- goto psb_intel_pipe_set_base_exit;
- start = psbfb->gtt->offset;
-
- offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8);
-
- REG_WRITE(dspstride, crtc->fb->pitches[0]);
-
- dspcntr = REG_READ(dspcntr_reg);
- dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
-
- switch (crtc->fb->bits_per_pixel) {
- case 8:
- dspcntr |= DISPPLANE_8BPP;
- break;
- case 16:
- if (crtc->fb->depth == 15)
- dspcntr |= DISPPLANE_15_16BPP;
- else
- dspcntr |= DISPPLANE_16BPP;
- break;
- case 24:
- case 32:
- dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
- break;
- default:
- dev_err(dev->dev, "Unknown color depth\n");
- ret = -EINVAL;
- psb_gtt_unpin(psbfb->gtt);
- goto psb_intel_pipe_set_base_exit;
- }
- REG_WRITE(dspcntr_reg, dspcntr);
-
-
- if (0 /* FIXMEAC - check what PSB needs */) {
- REG_WRITE(dspbase, offset);
- REG_READ(dspbase);
- REG_WRITE(dspsurf, start);
- REG_READ(dspsurf);
- } else {
- REG_WRITE(dspbase, start + offset);
- REG_READ(dspbase);
- }
-
-psb_intel_pipe_cleaner:
- /* If there was a previous display we can now unpin it */
- if (old_fb)
- psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
-
-psb_intel_pipe_set_base_exit:
- gma_power_end(dev);
- return ret;
-}
-
-/**
- * Sets the power management mode of the pipe and plane.
- *
- * This code should probably grow support for turning the cursor off and back
- * on appropriately at the same time as we're turning the pipe off/on.
- */
-static void psb_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
- struct drm_device *dev = crtc->dev;
- /* struct drm_i915_master_private *master_priv; */
- /* struct drm_i915_private *dev_priv = dev->dev_private; */
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
- int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE;
- int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
- u32 temp;
- bool enabled;
-
- /* XXX: When our outputs are all unaware of DPMS modes other than off
- * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
- */
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- /* Enable the DPLL */
- temp = REG_READ(dpll_reg);
- if ((temp & DPLL_VCO_ENABLE) == 0) {
- REG_WRITE(dpll_reg, temp);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
- REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
- REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
- }
-
- /* Enable the pipe */
- temp = REG_READ(pipeconf_reg);
- if ((temp & PIPEACONF_ENABLE) == 0)
- REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
-
- /* Enable the plane */
- temp = REG_READ(dspcntr_reg);
- if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
- REG_WRITE(dspcntr_reg,
- temp | DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
- }
-
- psb_intel_crtc_load_lut(crtc);
-
- /* Give the overlay scaler a chance to enable
- * if it's on this pipe */
- /* psb_intel_crtc_dpms_video(crtc, true); TODO */
- break;
- case DRM_MODE_DPMS_OFF:
- /* Give the overlay scaler a chance to disable
- * if it's on this pipe */
- /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
-
- /* Disable the VGA plane that we never use */
- REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
-
- /* Disable display plane */
- temp = REG_READ(dspcntr_reg);
- if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
- REG_WRITE(dspcntr_reg,
- temp & ~DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
- REG_READ(dspbase_reg);
- }
-
- /* Next, disable display pipes */
- temp = REG_READ(pipeconf_reg);
- if ((temp & PIPEACONF_ENABLE) != 0) {
- REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
- REG_READ(pipeconf_reg);
- }
-
- /* Wait for vblank for the disable to take effect. */
- psb_intel_wait_for_vblank(dev);
-
- temp = REG_READ(dpll_reg);
- if ((temp & DPLL_VCO_ENABLE) != 0) {
- REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
- }
-
- /* Wait for the clocks to turn off. */
- udelay(150);
- break;
- }
-
- enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
-
- /*Set FIFO Watermarks*/
- REG_WRITE(DSPARB, 0x3F3E);
-}
-
-static void psb_intel_crtc_prepare(struct drm_crtc *crtc)
-{
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
-}
-
-static void psb_intel_crtc_commit(struct drm_crtc *crtc)
-{
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
-}
-
-void psb_intel_encoder_prepare(struct drm_encoder *encoder)
-{
- struct drm_encoder_helper_funcs *encoder_funcs =
- encoder->helper_private;
- /* lvds has its own version of prepare see psb_intel_lvds_prepare */
- encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
-}
-
-void psb_intel_encoder_commit(struct drm_encoder *encoder)
-{
- struct drm_encoder_helper_funcs *encoder_funcs =
- encoder->helper_private;
- /* lvds has its own version of commit see psb_intel_lvds_commit */
- encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
-}
-
-static bool psb_intel_crtc_mode_fixup(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- return true;
-}
-
-
-/**
- * Return the pipe currently connected to the panel fitter,
- * or -1 if the panel fitter is not present or not in use
- */
-static int psb_intel_panel_fitter_pipe(struct drm_device *dev)
-{
- u32 pfit_control;
-
- pfit_control = REG_READ(PFIT_CONTROL);
-
- /* See if the panel fitter is in use */
- if ((pfit_control & PFIT_ENABLE) == 0)
- return -1;
- /* Must be on PIPE 1 for PSB */
- return 1;
-}
-
-static int psb_intel_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- int pipe = psb_intel_crtc->pipe;
- int fp_reg = (pipe == 0) ? FPA0 : FPB0;
- int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
- int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
- int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
- int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
- int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
- int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
- int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
- int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
- int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
- int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
- int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
- int refclk;
- struct psb_intel_clock_t clock;
- u32 dpll = 0, fp = 0, dspcntr, pipeconf;
- bool ok, is_sdvo = false, is_dvo = false;
- bool is_crt = false, is_lvds = false, is_tv = false;
- struct drm_mode_config *mode_config = &dev->mode_config;
- struct drm_connector *connector;
-
- /* No scan out no play */
- if (crtc->fb == NULL) {
- crtc_funcs->mode_set_base(crtc, x, y, old_fb);
- return 0;
- }
-
- list_for_each_entry(connector, &mode_config->connector_list, head) {
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
-
- if (!connector->encoder
- || connector->encoder->crtc != crtc)
- continue;
-
- switch (psb_intel_output->type) {
- case INTEL_OUTPUT_LVDS:
- is_lvds = true;
- break;
- case INTEL_OUTPUT_SDVO:
- is_sdvo = true;
- break;
- case INTEL_OUTPUT_DVO:
- is_dvo = true;
- break;
- case INTEL_OUTPUT_TVOUT:
- is_tv = true;
- break;
- case INTEL_OUTPUT_ANALOG:
- is_crt = true;
- break;
- }
- }
-
- refclk = 96000;
-
- ok = psb_intel_find_best_PLL(crtc, adjusted_mode->clock, refclk,
- &clock);
- if (!ok) {
- dev_err(dev->dev, "Couldn't find PLL settings for mode!\n");
- return 0;
- }
-
- fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
-
- dpll = DPLL_VGA_MODE_DIS;
- if (is_lvds) {
- dpll |= DPLLB_MODE_LVDS;
- dpll |= DPLL_DVO_HIGH_SPEED;
- } else
- dpll |= DPLLB_MODE_DAC_SERIAL;
- if (is_sdvo) {
- int sdvo_pixel_multiply =
- adjusted_mode->clock / mode->clock;
- dpll |= DPLL_DVO_HIGH_SPEED;
- dpll |=
- (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
- }
-
- /* compute bitmask from p1 value */
- dpll |= (1 << (clock.p1 - 1)) << 16;
- switch (clock.p2) {
- case 5:
- dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
- break;
- case 7:
- dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
- break;
- case 10:
- dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
- break;
- case 14:
- dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
- break;
- }
-
- if (is_tv) {
- /* XXX: just matching BIOS for now */
-/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
- dpll |= 3;
- }
- dpll |= PLL_REF_INPUT_DREFCLK;
-
- /* setup pipeconf */
- pipeconf = REG_READ(pipeconf_reg);
-
- /* Set up the display plane register */
- dspcntr = DISPPLANE_GAMMA_ENABLE;
-
- if (pipe == 0)
- dspcntr |= DISPPLANE_SEL_PIPE_A;
- else
- dspcntr |= DISPPLANE_SEL_PIPE_B;
-
- dspcntr |= DISPLAY_PLANE_ENABLE;
- pipeconf |= PIPEACONF_ENABLE;
- dpll |= DPLL_VCO_ENABLE;
-
-
- /* Disable the panel fitter if it was on our pipe */
- if (psb_intel_panel_fitter_pipe(dev) == pipe)
- REG_WRITE(PFIT_CONTROL, 0);
-
- drm_mode_debug_printmodeline(mode);
-
- if (dpll & DPLL_VCO_ENABLE) {
- REG_WRITE(fp_reg, fp);
- REG_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
- udelay(150);
- }
-
- /* The LVDS pin pair needs to be on before the DPLLs are enabled.
- * This is an exception to the general rule that mode_set doesn't turn
- * things on.
- */
- if (is_lvds) {
- u32 lvds = REG_READ(LVDS);
-
- lvds &= ~LVDS_PIPEB_SELECT;
- if (pipe == 1)
- lvds |= LVDS_PIPEB_SELECT;
-
- lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
- /* Set the B0-B3 data pairs corresponding to
- * whether we're going to
- * set the DPLLs for dual-channel mode or not.
- */
- lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
- if (clock.p2 == 7)
- lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
-
- /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
- * appropriately here, but we need to look more
- * thoroughly into how panels behave in the two modes.
- */
-
- REG_WRITE(LVDS, lvds);
- REG_READ(LVDS);
- }
-
- REG_WRITE(fp_reg, fp);
- REG_WRITE(dpll_reg, dpll);
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
-
- /* write it again -- the BIOS does, after all */
- REG_WRITE(dpll_reg, dpll);
-
- REG_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
-
- REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
- ((adjusted_mode->crtc_htotal - 1) << 16));
- REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
- ((adjusted_mode->crtc_hblank_end - 1) << 16));
- REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
- ((adjusted_mode->crtc_hsync_end - 1) << 16));
- REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
- REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
- ((adjusted_mode->crtc_vblank_end - 1) << 16));
- REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
- ((adjusted_mode->crtc_vsync_end - 1) << 16));
- /* pipesrc and dspsize control the size that is scaled from,
- * which should always be the user's requested size.
- */
- REG_WRITE(dspsize_reg,
- ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
- REG_WRITE(dsppos_reg, 0);
- REG_WRITE(pipesrc_reg,
- ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
- REG_WRITE(pipeconf_reg, pipeconf);
- REG_READ(pipeconf_reg);
-
- psb_intel_wait_for_vblank(dev);
-
- REG_WRITE(dspcntr_reg, dspcntr);
-
- /* Flush the plane changes */
- crtc_funcs->mode_set_base(crtc, x, y, old_fb);
-
- psb_intel_wait_for_vblank(dev);
-
- return 0;
-}
-
-/** Loads the palette/gamma unit for the CRTC with the prepared values */
-void psb_intel_crtc_load_lut(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *)dev->dev_private;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int palreg = PALETTE_A;
- int i;
-
- /* The clocks have to be on to load the palette. */
- if (!crtc->enabled)
- return;
-
- switch (psb_intel_crtc->pipe) {
- case 0:
- break;
- case 1:
- palreg = PALETTE_B;
- break;
- case 2:
- palreg = PALETTE_C;
- break;
- default:
- dev_err(dev->dev, "Illegal Pipe Number.\n");
- return;
- }
-
- if (gma_power_begin(dev, false)) {
- for (i = 0; i < 256; i++) {
- REG_WRITE(palreg + 4 * i,
- ((psb_intel_crtc->lut_r[i] +
- psb_intel_crtc->lut_adj[i]) << 16) |
- ((psb_intel_crtc->lut_g[i] +
- psb_intel_crtc->lut_adj[i]) << 8) |
- (psb_intel_crtc->lut_b[i] +
- psb_intel_crtc->lut_adj[i]));
- }
- gma_power_end(dev);
- } else {
- for (i = 0; i < 256; i++) {
- dev_priv->save_palette_a[i] =
- ((psb_intel_crtc->lut_r[i] +
- psb_intel_crtc->lut_adj[i]) << 16) |
- ((psb_intel_crtc->lut_g[i] +
- psb_intel_crtc->lut_adj[i]) << 8) |
- (psb_intel_crtc->lut_b[i] +
- psb_intel_crtc->lut_adj[i]);
- }
-
- }
-}
-
-/**
- * Save HW states of giving crtc
- */
-static void psb_intel_crtc_save(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- /* struct drm_psb_private *dev_priv =
- (struct drm_psb_private *)dev->dev_private; */
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
- int pipeA = (psb_intel_crtc->pipe == 0);
- uint32_t paletteReg;
- int i;
-
- if (!crtc_state) {
- dev_err(dev->dev, "No CRTC state found\n");
- return;
- }
-
- crtc_state->saveDSPCNTR = REG_READ(pipeA ? DSPACNTR : DSPBCNTR);
- crtc_state->savePIPECONF = REG_READ(pipeA ? PIPEACONF : PIPEBCONF);
- crtc_state->savePIPESRC = REG_READ(pipeA ? PIPEASRC : PIPEBSRC);
- crtc_state->saveFP0 = REG_READ(pipeA ? FPA0 : FPB0);
- crtc_state->saveFP1 = REG_READ(pipeA ? FPA1 : FPB1);
- crtc_state->saveDPLL = REG_READ(pipeA ? DPLL_A : DPLL_B);
- crtc_state->saveHTOTAL = REG_READ(pipeA ? HTOTAL_A : HTOTAL_B);
- crtc_state->saveHBLANK = REG_READ(pipeA ? HBLANK_A : HBLANK_B);
- crtc_state->saveHSYNC = REG_READ(pipeA ? HSYNC_A : HSYNC_B);
- crtc_state->saveVTOTAL = REG_READ(pipeA ? VTOTAL_A : VTOTAL_B);
- crtc_state->saveVBLANK = REG_READ(pipeA ? VBLANK_A : VBLANK_B);
- crtc_state->saveVSYNC = REG_READ(pipeA ? VSYNC_A : VSYNC_B);
- crtc_state->saveDSPSTRIDE = REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE);
-
- /*NOTE: DSPSIZE DSPPOS only for psb*/
- crtc_state->saveDSPSIZE = REG_READ(pipeA ? DSPASIZE : DSPBSIZE);
- crtc_state->saveDSPPOS = REG_READ(pipeA ? DSPAPOS : DSPBPOS);
-
- crtc_state->saveDSPBASE = REG_READ(pipeA ? DSPABASE : DSPBBASE);
-
- paletteReg = pipeA ? PALETTE_A : PALETTE_B;
- for (i = 0; i < 256; ++i)
- crtc_state->savePalette[i] = REG_READ(paletteReg + (i << 2));
-}
-
-/**
- * Restore HW states of giving crtc
- */
-static void psb_intel_crtc_restore(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- /* struct drm_psb_private * dev_priv =
- (struct drm_psb_private *)dev->dev_private; */
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
- /* struct drm_crtc_helper_funcs * crtc_funcs = crtc->helper_private; */
- int pipeA = (psb_intel_crtc->pipe == 0);
- uint32_t paletteReg;
- int i;
-
- if (!crtc_state) {
- dev_err(dev->dev, "No crtc state\n");
- return;
- }
-
- if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
- REG_WRITE(pipeA ? DPLL_A : DPLL_B,
- crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
- REG_READ(pipeA ? DPLL_A : DPLL_B);
- udelay(150);
- }
-
- REG_WRITE(pipeA ? FPA0 : FPB0, crtc_state->saveFP0);
- REG_READ(pipeA ? FPA0 : FPB0);
-
- REG_WRITE(pipeA ? FPA1 : FPB1, crtc_state->saveFP1);
- REG_READ(pipeA ? FPA1 : FPB1);
-
- REG_WRITE(pipeA ? DPLL_A : DPLL_B, crtc_state->saveDPLL);
- REG_READ(pipeA ? DPLL_A : DPLL_B);
- udelay(150);
-
- REG_WRITE(pipeA ? HTOTAL_A : HTOTAL_B, crtc_state->saveHTOTAL);
- REG_WRITE(pipeA ? HBLANK_A : HBLANK_B, crtc_state->saveHBLANK);
- REG_WRITE(pipeA ? HSYNC_A : HSYNC_B, crtc_state->saveHSYNC);
- REG_WRITE(pipeA ? VTOTAL_A : VTOTAL_B, crtc_state->saveVTOTAL);
- REG_WRITE(pipeA ? VBLANK_A : VBLANK_B, crtc_state->saveVBLANK);
- REG_WRITE(pipeA ? VSYNC_A : VSYNC_B, crtc_state->saveVSYNC);
- REG_WRITE(pipeA ? DSPASTRIDE : DSPBSTRIDE, crtc_state->saveDSPSTRIDE);
-
- REG_WRITE(pipeA ? DSPASIZE : DSPBSIZE, crtc_state->saveDSPSIZE);
- REG_WRITE(pipeA ? DSPAPOS : DSPBPOS, crtc_state->saveDSPPOS);
-
- REG_WRITE(pipeA ? PIPEASRC : PIPEBSRC, crtc_state->savePIPESRC);
- REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE);
- REG_WRITE(pipeA ? PIPEACONF : PIPEBCONF, crtc_state->savePIPECONF);
-
- psb_intel_wait_for_vblank(dev);
-
- REG_WRITE(pipeA ? DSPACNTR : DSPBCNTR, crtc_state->saveDSPCNTR);
- REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE);
-
- psb_intel_wait_for_vblank(dev);
-
- paletteReg = pipeA ? PALETTE_A : PALETTE_B;
- for (i = 0; i < 256; ++i)
- REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]);
-}
-
-static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc,
- struct drm_file *file_priv,
- uint32_t handle,
- uint32_t width, uint32_t height)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
- uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
- uint32_t temp;
- size_t addr = 0;
- struct gtt_range *gt;
- struct drm_gem_object *obj;
- int ret;
-
- /* if we want to turn of the cursor ignore width and height */
- if (!handle) {
- /* turn off the cursor */
- temp = CURSOR_MODE_DISABLE;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE(control, temp);
- REG_WRITE(base, 0);
- gma_power_end(dev);
- }
-
- /* Unpin the old GEM object */
- if (psb_intel_crtc->cursor_obj) {
- gt = container_of(psb_intel_crtc->cursor_obj,
- struct gtt_range, gem);
- psb_gtt_unpin(gt);
- drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
- psb_intel_crtc->cursor_obj = NULL;
- }
-
- return 0;
- }
-
- /* Currently we only support 64x64 cursors */
- if (width != 64 || height != 64) {
- dev_dbg(dev->dev, "we currently only support 64x64 cursors\n");
- return -EINVAL;
- }
-
- obj = drm_gem_object_lookup(dev, file_priv, handle);
- if (!obj)
- return -ENOENT;
-
- if (obj->size < width * height * 4) {
- dev_dbg(dev->dev, "buffer is to small\n");
- return -ENOMEM;
- }
-
- gt = container_of(obj, struct gtt_range, gem);
-
- /* Pin the memory into the GTT */
- ret = psb_gtt_pin(gt);
- if (ret) {
- dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
- return ret;
- }
-
-
- addr = gt->offset; /* Or resource.start ??? */
-
- psb_intel_crtc->cursor_addr = addr;
-
- temp = 0;
- /* set the pipe for the cursor */
- temp |= (pipe << 28);
- temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE(control, temp);
- REG_WRITE(base, addr);
- gma_power_end(dev);
- }
-
- /* unpin the old bo */
- if (psb_intel_crtc->cursor_obj) {
- gt = container_of(psb_intel_crtc->cursor_obj,
- struct gtt_range, gem);
- psb_gtt_unpin(gt);
- drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
- psb_intel_crtc->cursor_obj = obj;
- }
- return 0;
-}
-
-static int psb_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
-{
- struct drm_device *dev = crtc->dev;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- uint32_t temp = 0;
- uint32_t addr;
-
-
- if (x < 0) {
- temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
- x = -x;
- }
- if (y < 0) {
- temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
- y = -y;
- }
-
- temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
- temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
-
- addr = psb_intel_crtc->cursor_addr;
-
- if (gma_power_begin(dev, false)) {
- REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
- REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr);
- gma_power_end(dev);
- }
- return 0;
-}
-
-void psb_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red,
- u16 *green, u16 *blue, uint32_t type, uint32_t size)
-{
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int i;
-
- if (size != 256)
- return;
-
- for (i = 0; i < 256; i++) {
- psb_intel_crtc->lut_r[i] = red[i] >> 8;
- psb_intel_crtc->lut_g[i] = green[i] >> 8;
- psb_intel_crtc->lut_b[i] = blue[i] >> 8;
- }
-
- psb_intel_crtc_load_lut(crtc);
-}
-
-static int psb_crtc_set_config(struct drm_mode_set *set)
-{
- int ret;
- struct drm_device *dev = set->crtc->dev;
-
- pm_runtime_forbid(&dev->pdev->dev);
- ret = drm_crtc_helper_set_config(set);
- pm_runtime_allow(&dev->pdev->dev);
- return ret;
-}
-
-/* Returns the clock of the currently programmed mode of the given pipe. */
-static int psb_intel_crtc_clock_get(struct drm_device *dev,
- struct drm_crtc *crtc)
-{
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- u32 dpll;
- u32 fp;
- struct psb_intel_clock_t clock;
- bool is_lvds;
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (gma_power_begin(dev, false)) {
- dpll = REG_READ((pipe == 0) ? DPLL_A : DPLL_B);
- if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
- fp = REG_READ((pipe == 0) ? FPA0 : FPB0);
- else
- fp = REG_READ((pipe == 0) ? FPA1 : FPB1);
- is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN);
- gma_power_end(dev);
- } else {
- dpll = (pipe == 0) ?
- dev_priv->saveDPLL_A : dev_priv->saveDPLL_B;
-
- if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
- fp = (pipe == 0) ?
- dev_priv->saveFPA0 :
- dev_priv->saveFPB0;
- else
- fp = (pipe == 0) ?
- dev_priv->saveFPA1 :
- dev_priv->saveFPB1;
-
- is_lvds = (pipe == 1) && (dev_priv->saveLVDS & LVDS_PORT_EN);
- }
-
- clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
- clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
- clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
-
- if (is_lvds) {
- clock.p1 =
- ffs((dpll &
- DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
- DPLL_FPA01_P1_POST_DIV_SHIFT);
- clock.p2 = 14;
-
- if ((dpll & PLL_REF_INPUT_MASK) ==
- PLLB_REF_INPUT_SPREADSPECTRUMIN) {
- /* XXX: might not be 66MHz */
- i8xx_clock(66000, &clock);
- } else
- i8xx_clock(48000, &clock);
- } else {
- if (dpll & PLL_P1_DIVIDE_BY_TWO)
- clock.p1 = 2;
- else {
- clock.p1 =
- ((dpll &
- DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
- DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
- }
- if (dpll & PLL_P2_DIVIDE_BY_4)
- clock.p2 = 4;
- else
- clock.p2 = 2;
-
- i8xx_clock(48000, &clock);
- }
-
- /* XXX: It would be nice to validate the clocks, but we can't reuse
- * i830PllIsValid() because it relies on the xf86_config connector
- * configuration being accurate, which it isn't necessarily.
- */
-
- return clock.dot;
-}
-
-/** Returns the currently programmed mode of the given pipe. */
-struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev,
- struct drm_crtc *crtc)
-{
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- int pipe = psb_intel_crtc->pipe;
- struct drm_display_mode *mode;
- int htot;
- int hsync;
- int vtot;
- int vsync;
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (gma_power_begin(dev, false)) {
- htot = REG_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
- hsync = REG_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
- vtot = REG_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
- vsync = REG_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
- gma_power_end(dev);
- } else {
- htot = (pipe == 0) ?
- dev_priv->saveHTOTAL_A : dev_priv->saveHTOTAL_B;
- hsync = (pipe == 0) ?
- dev_priv->saveHSYNC_A : dev_priv->saveHSYNC_B;
- vtot = (pipe == 0) ?
- dev_priv->saveVTOTAL_A : dev_priv->saveVTOTAL_B;
- vsync = (pipe == 0) ?
- dev_priv->saveVSYNC_A : dev_priv->saveVSYNC_B;
- }
-
- mode = kzalloc(sizeof(*mode), GFP_KERNEL);
- if (!mode)
- return NULL;
-
- mode->clock = psb_intel_crtc_clock_get(dev, crtc);
- mode->hdisplay = (htot & 0xffff) + 1;
- mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
- mode->hsync_start = (hsync & 0xffff) + 1;
- mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
- mode->vdisplay = (vtot & 0xffff) + 1;
- mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
- mode->vsync_start = (vsync & 0xffff) + 1;
- mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
-
- drm_mode_set_name(mode);
- drm_mode_set_crtcinfo(mode, 0);
-
- return mode;
-}
-
-void psb_intel_crtc_destroy(struct drm_crtc *crtc)
-{
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct gtt_range *gt;
-
- /* Unpin the old GEM object */
- if (psb_intel_crtc->cursor_obj) {
- gt = container_of(psb_intel_crtc->cursor_obj,
- struct gtt_range, gem);
- psb_gtt_unpin(gt);
- drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
- psb_intel_crtc->cursor_obj = NULL;
- }
- kfree(psb_intel_crtc->crtc_state);
- drm_crtc_cleanup(crtc);
- kfree(psb_intel_crtc);
-}
-
-const struct drm_crtc_helper_funcs psb_intel_helper_funcs = {
- .dpms = psb_intel_crtc_dpms,
- .mode_fixup = psb_intel_crtc_mode_fixup,
- .mode_set = psb_intel_crtc_mode_set,
- .mode_set_base = psb_intel_pipe_set_base,
- .prepare = psb_intel_crtc_prepare,
- .commit = psb_intel_crtc_commit,
-};
-
-const struct drm_crtc_funcs psb_intel_crtc_funcs = {
- .save = psb_intel_crtc_save,
- .restore = psb_intel_crtc_restore,
- .cursor_set = psb_intel_crtc_cursor_set,
- .cursor_move = psb_intel_crtc_cursor_move,
- .gamma_set = psb_intel_crtc_gamma_set,
- .set_config = psb_crtc_set_config,
- .destroy = psb_intel_crtc_destroy,
-};
-
-/*
- * Set the default value of cursor control and base register
- * to zero. This is a workaround for h/w defect on Oaktrail
- */
-static void psb_intel_cursor_init(struct drm_device *dev, int pipe)
-{
- u32 control[3] = { CURACNTR, CURBCNTR, CURCCNTR };
- u32 base[3] = { CURABASE, CURBBASE, CURCBASE };
-
- REG_WRITE(control[pipe], 0);
- REG_WRITE(base[pipe], 0);
-}
-
-void psb_intel_crtc_init(struct drm_device *dev, int pipe,
- struct psb_intel_mode_device *mode_dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_intel_crtc *psb_intel_crtc;
- int i;
- uint16_t *r_base, *g_base, *b_base;
-
- /* We allocate a extra array of drm_connector pointers
- * for fbdev after the crtc */
- psb_intel_crtc =
- kzalloc(sizeof(struct psb_intel_crtc) +
- (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)),
- GFP_KERNEL);
- if (psb_intel_crtc == NULL)
- return;
-
- psb_intel_crtc->crtc_state =
- kzalloc(sizeof(struct psb_intel_crtc_state), GFP_KERNEL);
- if (!psb_intel_crtc->crtc_state) {
- dev_err(dev->dev, "Crtc state error: No memory\n");
- kfree(psb_intel_crtc);
- return;
- }
-
- /* Set the CRTC operations from the chip specific data */
- drm_crtc_init(dev, &psb_intel_crtc->base, dev_priv->ops->crtc_funcs);
-
- drm_mode_crtc_set_gamma_size(&psb_intel_crtc->base, 256);
- psb_intel_crtc->pipe = pipe;
- psb_intel_crtc->plane = pipe;
-
- r_base = psb_intel_crtc->base.gamma_store;
- g_base = r_base + 256;
- b_base = g_base + 256;
- for (i = 0; i < 256; i++) {
- psb_intel_crtc->lut_r[i] = i;
- psb_intel_crtc->lut_g[i] = i;
- psb_intel_crtc->lut_b[i] = i;
- r_base[i] = i << 8;
- g_base[i] = i << 8;
- b_base[i] = i << 8;
-
- psb_intel_crtc->lut_adj[i] = 0;
- }
-
- psb_intel_crtc->mode_dev = mode_dev;
- psb_intel_crtc->cursor_addr = 0;
-
- drm_crtc_helper_add(&psb_intel_crtc->base,
- dev_priv->ops->crtc_helper);
-
- /* Setup the array of drm_connector pointer array */
- psb_intel_crtc->mode_set.crtc = &psb_intel_crtc->base;
- BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
- dev_priv->plane_to_crtc_mapping[psb_intel_crtc->plane] != NULL);
- dev_priv->plane_to_crtc_mapping[psb_intel_crtc->plane] =
- &psb_intel_crtc->base;
- dev_priv->pipe_to_crtc_mapping[psb_intel_crtc->pipe] =
- &psb_intel_crtc->base;
- psb_intel_crtc->mode_set.connectors =
- (struct drm_connector **) (psb_intel_crtc + 1);
- psb_intel_crtc->mode_set.num_connectors = 0;
- psb_intel_cursor_init(dev, pipe);
-}
-
-int psb_intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct drm_psb_get_pipe_from_crtc_id_arg *pipe_from_crtc_id = data;
- struct drm_mode_object *drmmode_obj;
- struct psb_intel_crtc *crtc;
-
- if (!dev_priv) {
- dev_err(dev->dev, "called with no initialization\n");
- return -EINVAL;
- }
-
- drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
- DRM_MODE_OBJECT_CRTC);
-
- if (!drmmode_obj) {
- dev_err(dev->dev, "no such CRTC id\n");
- return -EINVAL;
- }
-
- crtc = to_psb_intel_crtc(obj_to_crtc(drmmode_obj));
- pipe_from_crtc_id->pipe = crtc->pipe;
-
- return 0;
-}
-
-struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
-{
- struct drm_crtc *crtc = NULL;
-
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- if (psb_intel_crtc->pipe == pipe)
- break;
- }
- return crtc;
-}
-
-int psb_intel_connector_clones(struct drm_device *dev, int type_mask)
-{
- int index_mask = 0;
- struct drm_connector *connector;
- int entry = 0;
-
- list_for_each_entry(connector, &dev->mode_config.connector_list,
- head) {
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- if (type_mask & (1 << psb_intel_output->type))
- index_mask |= (1 << entry);
- entry++;
- }
- return index_mask;
-}
-
-
-void psb_intel_modeset_cleanup(struct drm_device *dev)
-{
- drm_mode_config_cleanup(dev);
-}
-
-
-/* current intel driver doesn't take advantage of encoders
- always give back the encoder for the connector
-*/
-struct drm_encoder *psb_intel_best_encoder(struct drm_connector *connector)
-{
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
-
- return &psb_intel_output->enc;
-}
-
+++ /dev/null
-/* copyright (c) 2008, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- */
-
-#ifndef _INTEL_DISPLAY_H_
-#define _INTEL_DISPLAY_H_
-
-bool psb_intel_pipe_has_type(struct drm_crtc *crtc, int type);
-void psb_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red,
- u16 *green, u16 *blue, uint32_t type, uint32_t size);
-void psb_intel_crtc_destroy(struct drm_crtc *crtc);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2009-2011, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __INTEL_DRV_H__
-#define __INTEL_DRV_H__
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <linux/gpio.h>
-
-/*
- * Display related stuff
- */
-
-/* store information about an Ixxx DVO */
-/* The i830->i865 use multiple DVOs with multiple i2cs */
-/* the i915, i945 have a single sDVO i2c bus - which is different */
-#define MAX_OUTPUTS 6
-/* maximum connectors per crtcs in the mode set */
-#define INTELFB_CONN_LIMIT 4
-
-#define INTEL_I2C_BUS_DVO 1
-#define INTEL_I2C_BUS_SDVO 2
-
-/* these are outputs from the chip - integrated only
- * external chips are via DVO or SDVO output */
-#define INTEL_OUTPUT_UNUSED 0
-#define INTEL_OUTPUT_ANALOG 1
-#define INTEL_OUTPUT_DVO 2
-#define INTEL_OUTPUT_SDVO 3
-#define INTEL_OUTPUT_LVDS 4
-#define INTEL_OUTPUT_TVOUT 5
-#define INTEL_OUTPUT_HDMI 6
-#define INTEL_OUTPUT_MIPI 7
-#define INTEL_OUTPUT_MIPI2 8
-
-#define INTEL_DVO_CHIP_NONE 0
-#define INTEL_DVO_CHIP_LVDS 1
-#define INTEL_DVO_CHIP_TMDS 2
-#define INTEL_DVO_CHIP_TVOUT 4
-
-/*
- * Hold information useally put on the device driver privates here,
- * since it needs to be shared across multiple of devices drivers privates.
- */
-struct psb_intel_mode_device {
-
- /*
- * Abstracted memory manager operations
- */
- size_t(*bo_offset) (struct drm_device *dev, void *bo);
-
- /*
- * Cursor (Can go ?)
- */
- int cursor_needs_physical;
-
- /*
- * LVDS info
- */
- int backlight_duty_cycle; /* restore backlight to this value */
- bool panel_wants_dither;
- struct drm_display_mode *panel_fixed_mode;
- struct drm_display_mode *panel_fixed_mode2;
- struct drm_display_mode *vbt_mode; /* if any */
-
- uint32_t saveBLC_PWM_CTL;
-};
-
-struct psb_intel_i2c_chan {
- /* for getting at dev. private (mmio etc.) */
- struct drm_device *drm_dev;
- u32 reg; /* GPIO reg */
- struct i2c_adapter adapter;
- struct i2c_algo_bit_data algo;
- u8 slave_addr;
-};
-
-struct psb_intel_output {
- struct drm_connector base;
-
- struct drm_encoder enc;
- int type;
-
- struct psb_intel_i2c_chan *i2c_bus; /* for control functions */
- struct psb_intel_i2c_chan *ddc_bus; /* for DDC only stuff */
- bool load_detect_temp;
- void *dev_priv;
-
- struct psb_intel_mode_device *mode_dev;
- struct i2c_adapter *hdmi_i2c_adapter; /* for control functions */
-};
-
-struct psb_intel_crtc_state {
- uint32_t saveDSPCNTR;
- uint32_t savePIPECONF;
- uint32_t savePIPESRC;
- uint32_t saveDPLL;
- uint32_t saveFP0;
- uint32_t saveFP1;
- uint32_t saveHTOTAL;
- uint32_t saveHBLANK;
- uint32_t saveHSYNC;
- uint32_t saveVTOTAL;
- uint32_t saveVBLANK;
- uint32_t saveVSYNC;
- uint32_t saveDSPSTRIDE;
- uint32_t saveDSPSIZE;
- uint32_t saveDSPPOS;
- uint32_t saveDSPBASE;
- uint32_t savePalette[256];
-};
-
-struct psb_intel_crtc {
- struct drm_crtc base;
- int pipe;
- int plane;
- uint32_t cursor_addr;
- u8 lut_r[256], lut_g[256], lut_b[256];
- u8 lut_adj[256];
- struct psb_intel_framebuffer *fbdev_fb;
- /* a mode_set for fbdev users on this crtc */
- struct drm_mode_set mode_set;
-
- /* GEM object that holds our cursor */
- struct drm_gem_object *cursor_obj;
-
- struct drm_display_mode saved_mode;
- struct drm_display_mode saved_adjusted_mode;
-
- struct psb_intel_mode_device *mode_dev;
-
- /*crtc mode setting flags*/
- u32 mode_flags;
-
- /* Saved Crtc HW states */
- struct psb_intel_crtc_state *crtc_state;
-};
-
-#define to_psb_intel_crtc(x) \
- container_of(x, struct psb_intel_crtc, base)
-#define to_psb_intel_output(x) \
- container_of(x, struct psb_intel_output, base)
-#define enc_to_psb_intel_output(x) \
- container_of(x, struct psb_intel_output, enc)
-#define to_psb_intel_framebuffer(x) \
- container_of(x, struct psb_intel_framebuffer, base)
-
-struct psb_intel_i2c_chan *psb_intel_i2c_create(struct drm_device *dev,
- const u32 reg, const char *name);
-void psb_intel_i2c_destroy(struct psb_intel_i2c_chan *chan);
-int psb_intel_ddc_get_modes(struct psb_intel_output *psb_intel_output);
-extern bool psb_intel_ddc_probe(struct psb_intel_output *psb_intel_output);
-
-extern void psb_intel_crtc_init(struct drm_device *dev, int pipe,
- struct psb_intel_mode_device *mode_dev);
-extern void psb_intel_crt_init(struct drm_device *dev);
-extern void psb_intel_sdvo_init(struct drm_device *dev, int output_device);
-extern void psb_intel_dvo_init(struct drm_device *dev);
-extern void psb_intel_tv_init(struct drm_device *dev);
-extern void psb_intel_lvds_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev);
-extern void psb_intel_lvds_set_brightness(struct drm_device *dev, int level);
-extern void mrst_lvds_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev);
-extern void mrst_wait_for_INTR_PKT_SENT(struct drm_device *dev);
-extern void mrst_dsi_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev);
-extern void mid_dsi_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev, int dsi_num);
-
-extern void psb_intel_crtc_load_lut(struct drm_crtc *crtc);
-extern void psb_intel_encoder_prepare(struct drm_encoder *encoder);
-extern void psb_intel_encoder_commit(struct drm_encoder *encoder);
-
-extern struct drm_encoder *psb_intel_best_encoder(struct drm_connector
- *connector);
-
-extern struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev,
- struct drm_crtc *crtc);
-extern void psb_intel_wait_for_vblank(struct drm_device *dev);
-extern int psb_intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
-extern struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev,
- int pipe);
-extern struct drm_connector *psb_intel_sdvo_find(struct drm_device *dev,
- int sdvoB);
-extern int psb_intel_sdvo_supports_hotplug(struct drm_connector *connector);
-extern void psb_intel_sdvo_set_hotplug(struct drm_connector *connector,
- int enable);
-extern int intelfb_probe(struct drm_device *dev);
-extern int intelfb_remove(struct drm_device *dev,
- struct drm_framebuffer *fb);
-extern struct drm_framebuffer *psb_intel_framebuffer_create(struct drm_device
- *dev, struct
- drm_mode_fb_cmd
- *mode_cmd,
- void *mm_private);
-extern bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode);
-extern int psb_intel_lvds_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode);
-extern int psb_intel_lvds_set_property(struct drm_connector *connector,
- struct drm_property *property,
- uint64_t value);
-extern void psb_intel_lvds_destroy(struct drm_connector *connector);
-extern const struct drm_encoder_funcs psb_intel_lvds_enc_funcs;
-
-extern void mdfldWaitForPipeDisable(struct drm_device *dev, int pipe);
-extern void mdfldWaitForPipeEnable(struct drm_device *dev, int pipe);
-
-#endif /* __INTEL_DRV_H__ */
+++ /dev/null
-/*
- * Copyright © 2006-2007 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- * Dave Airlie <airlied@linux.ie>
- * Jesse Barnes <jesse.barnes@intel.com>
- */
-
-#include <linux/i2c.h>
-#include <drm/drmP.h>
-
-#include "intel_bios.h"
-#include "psb_drv.h"
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "power.h"
-#include <linux/pm_runtime.h>
-
-/*
- * LVDS I2C backlight control macros
- */
-#define BRIGHTNESS_MAX_LEVEL 100
-#define BRIGHTNESS_MASK 0xFF
-#define BLC_I2C_TYPE 0x01
-#define BLC_PWM_TYPT 0x02
-
-#define BLC_POLARITY_NORMAL 0
-#define BLC_POLARITY_INVERSE 1
-
-#define PSB_BLC_MAX_PWM_REG_FREQ (0xFFFE)
-#define PSB_BLC_MIN_PWM_REG_FREQ (0x2)
-#define PSB_BLC_PWM_PRECISION_FACTOR (10)
-#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16)
-#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
-
-struct psb_intel_lvds_priv {
- /*
- * Saved LVDO output states
- */
- uint32_t savePP_ON;
- uint32_t savePP_OFF;
- uint32_t saveLVDS;
- uint32_t savePP_CONTROL;
- uint32_t savePP_CYCLE;
- uint32_t savePFIT_CONTROL;
- uint32_t savePFIT_PGM_RATIOS;
- uint32_t saveBLC_PWM_CTL;
-};
-
-
-/*
- * Returns the maximum level of the backlight duty cycle field.
- */
-static u32 psb_intel_lvds_get_max_backlight(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 ret;
-
- if (gma_power_begin(dev, false)) {
- ret = REG_READ(BLC_PWM_CTL);
- gma_power_end(dev);
- } else /* Powered off, use the saved value */
- ret = dev_priv->saveBLC_PWM_CTL;
-
- /* Top 15bits hold the frequency mask */
- ret = (ret & BACKLIGHT_MODULATION_FREQ_MASK) >>
- BACKLIGHT_MODULATION_FREQ_SHIFT;
-
- ret *= 2; /* Return a 16bit range as needed for setting */
- if (ret == 0)
- dev_err(dev->dev, "BL bug: Reg %08x save %08X\n",
- REG_READ(BLC_PWM_CTL), dev_priv->saveBLC_PWM_CTL);
- return ret;
-}
-
-/*
- * Set LVDS backlight level by I2C command
- *
- * FIXME: at some point we need to both track this for PM and also
- * disable runtime pm on MRST if the brightness is nil (ie blanked)
- */
-static int psb_lvds_i2c_set_brightness(struct drm_device *dev,
- unsigned int level)
-{
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *)dev->dev_private;
-
- struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
- u8 out_buf[2];
- unsigned int blc_i2c_brightness;
-
- struct i2c_msg msgs[] = {
- {
- .addr = lvds_i2c_bus->slave_addr,
- .flags = 0,
- .len = 2,
- .buf = out_buf,
- }
- };
-
- blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
- BRIGHTNESS_MASK /
- BRIGHTNESS_MAX_LEVEL);
-
- if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
- blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
-
- out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
- out_buf[1] = (u8)blc_i2c_brightness;
-
- if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1) {
- dev_dbg(dev->dev, "I2C set brightness.(command, value) (%d, %d)\n",
- dev_priv->lvds_bl->brightnesscmd,
- blc_i2c_brightness);
- return 0;
- }
-
- dev_err(dev->dev, "I2C transfer error\n");
- return -1;
-}
-
-
-static int psb_lvds_pwm_set_brightness(struct drm_device *dev, int level)
-{
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *)dev->dev_private;
-
- u32 max_pwm_blc;
- u32 blc_pwm_duty_cycle;
-
- max_pwm_blc = psb_intel_lvds_get_max_backlight(dev);
-
- /*BLC_PWM_CTL Should be initiated while backlight device init*/
- BUG_ON(max_pwm_blc == 0);
-
- blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
-
- if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
- blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
-
- blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
- REG_WRITE(BLC_PWM_CTL,
- (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
- (blc_pwm_duty_cycle));
-
- dev_info(dev->dev, "Backlight lvds set brightness %08x\n",
- (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
- (blc_pwm_duty_cycle));
-
- return 0;
-}
-
-/*
- * Set LVDS backlight level either by I2C or PWM
- */
-void psb_intel_lvds_set_brightness(struct drm_device *dev, int level)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- dev_dbg(dev->dev, "backlight level is %d\n", level);
-
- if (!dev_priv->lvds_bl) {
- dev_err(dev->dev, "NO LVDS backlight info\n");
- return;
- }
-
- if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
- psb_lvds_i2c_set_brightness(dev, level);
- else
- psb_lvds_pwm_set_brightness(dev, level);
-}
-
-/*
- * Sets the backlight level.
- *
- * level: backlight level, from 0 to psb_intel_lvds_get_max_backlight().
- */
-static void psb_intel_lvds_set_backlight(struct drm_device *dev, int level)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 blc_pwm_ctl;
-
- if (gma_power_begin(dev, false)) {
- blc_pwm_ctl = REG_READ(BLC_PWM_CTL);
- blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK;
- REG_WRITE(BLC_PWM_CTL,
- (blc_pwm_ctl |
- (level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
- dev_priv->saveBLC_PWM_CTL = (blc_pwm_ctl |
- (level << BACKLIGHT_DUTY_CYCLE_SHIFT));
- gma_power_end(dev);
- } else {
- blc_pwm_ctl = dev_priv->saveBLC_PWM_CTL &
- ~BACKLIGHT_DUTY_CYCLE_MASK;
- dev_priv->saveBLC_PWM_CTL = (blc_pwm_ctl |
- (level << BACKLIGHT_DUTY_CYCLE_SHIFT));
- }
-}
-
-/*
- * Sets the power state for the panel.
- */
-static void psb_intel_lvds_set_power(struct drm_device *dev,
- struct psb_intel_output *output, bool on)
-{
- u32 pp_status;
-
- if (!gma_power_begin(dev, true)) {
- dev_err(dev->dev, "set power, chip off!\n");
- return;
- }
-
- if (on) {
- REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
- POWER_TARGET_ON);
- do {
- pp_status = REG_READ(PP_STATUS);
- } while ((pp_status & PP_ON) == 0);
-
- psb_intel_lvds_set_backlight(dev,
- output->
- mode_dev->backlight_duty_cycle);
- } else {
- psb_intel_lvds_set_backlight(dev, 0);
-
- REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
- ~POWER_TARGET_ON);
- do {
- pp_status = REG_READ(PP_STATUS);
- } while (pp_status & PP_ON);
- }
-
- gma_power_end(dev);
-}
-
-static void psb_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
-{
- struct drm_device *dev = encoder->dev;
- struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
-
- if (mode == DRM_MODE_DPMS_ON)
- psb_intel_lvds_set_power(dev, output, true);
- else
- psb_intel_lvds_set_power(dev, output, false);
-
- /* XXX: We never power down the LVDS pairs. */
-}
-
-static void psb_intel_lvds_save(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *)dev->dev_private;
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- struct psb_intel_lvds_priv *lvds_priv =
- (struct psb_intel_lvds_priv *)psb_intel_output->dev_priv;
-
- lvds_priv->savePP_ON = REG_READ(LVDSPP_ON);
- lvds_priv->savePP_OFF = REG_READ(LVDSPP_OFF);
- lvds_priv->saveLVDS = REG_READ(LVDS);
- lvds_priv->savePP_CONTROL = REG_READ(PP_CONTROL);
- lvds_priv->savePP_CYCLE = REG_READ(PP_CYCLE);
- /*lvds_priv->savePP_DIVISOR = REG_READ(PP_DIVISOR);*/
- lvds_priv->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
- lvds_priv->savePFIT_CONTROL = REG_READ(PFIT_CONTROL);
- lvds_priv->savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS);
-
- /*TODO: move backlight_duty_cycle to psb_intel_lvds_priv*/
- dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
- BACKLIGHT_DUTY_CYCLE_MASK);
-
- /*
- * If the light is off at server startup,
- * just make it full brightness
- */
- if (dev_priv->backlight_duty_cycle == 0)
- dev_priv->backlight_duty_cycle =
- psb_intel_lvds_get_max_backlight(dev);
-
- dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
- lvds_priv->savePP_ON,
- lvds_priv->savePP_OFF,
- lvds_priv->saveLVDS,
- lvds_priv->savePP_CONTROL,
- lvds_priv->savePP_CYCLE,
- lvds_priv->saveBLC_PWM_CTL);
-}
-
-static void psb_intel_lvds_restore(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- u32 pp_status;
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- struct psb_intel_lvds_priv *lvds_priv =
- (struct psb_intel_lvds_priv *)psb_intel_output->dev_priv;
-
- dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
- lvds_priv->savePP_ON,
- lvds_priv->savePP_OFF,
- lvds_priv->saveLVDS,
- lvds_priv->savePP_CONTROL,
- lvds_priv->savePP_CYCLE,
- lvds_priv->saveBLC_PWM_CTL);
-
- REG_WRITE(BLC_PWM_CTL, lvds_priv->saveBLC_PWM_CTL);
- REG_WRITE(PFIT_CONTROL, lvds_priv->savePFIT_CONTROL);
- REG_WRITE(PFIT_PGM_RATIOS, lvds_priv->savePFIT_PGM_RATIOS);
- REG_WRITE(LVDSPP_ON, lvds_priv->savePP_ON);
- REG_WRITE(LVDSPP_OFF, lvds_priv->savePP_OFF);
- /*REG_WRITE(PP_DIVISOR, lvds_priv->savePP_DIVISOR);*/
- REG_WRITE(PP_CYCLE, lvds_priv->savePP_CYCLE);
- REG_WRITE(PP_CONTROL, lvds_priv->savePP_CONTROL);
- REG_WRITE(LVDS, lvds_priv->saveLVDS);
-
- if (lvds_priv->savePP_CONTROL & POWER_TARGET_ON) {
- REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
- POWER_TARGET_ON);
- do {
- pp_status = REG_READ(PP_STATUS);
- } while ((pp_status & PP_ON) == 0);
- } else {
- REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
- ~POWER_TARGET_ON);
- do {
- pp_status = REG_READ(PP_STATUS);
- } while (pp_status & PP_ON);
- }
-}
-
-int psb_intel_lvds_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- struct drm_display_mode *fixed_mode =
- psb_intel_output->mode_dev->panel_fixed_mode;
-
- if (psb_intel_output->type == INTEL_OUTPUT_MIPI2)
- fixed_mode = psb_intel_output->mode_dev->panel_fixed_mode2;
-
- /* just in case */
- if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
- return MODE_NO_DBLESCAN;
-
- /* just in case */
- if (mode->flags & DRM_MODE_FLAG_INTERLACE)
- return MODE_NO_INTERLACE;
-
- if (fixed_mode) {
- if (mode->hdisplay > fixed_mode->hdisplay)
- return MODE_PANEL;
- if (mode->vdisplay > fixed_mode->vdisplay)
- return MODE_PANEL;
- }
- return MODE_OK;
-}
-
-bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct psb_intel_mode_device *mode_dev =
- enc_to_psb_intel_output(encoder)->mode_dev;
- struct drm_device *dev = encoder->dev;
- struct psb_intel_crtc *psb_intel_crtc =
- to_psb_intel_crtc(encoder->crtc);
- struct drm_encoder *tmp_encoder;
- struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
- struct psb_intel_output *psb_intel_output =
- enc_to_psb_intel_output(encoder);
-
- if (psb_intel_output->type == INTEL_OUTPUT_MIPI2)
- panel_fixed_mode = mode_dev->panel_fixed_mode2;
-
- /* PSB requires the LVDS is on pipe B, MRST has only one pipe anyway */
- if (!IS_MRST(dev) && psb_intel_crtc->pipe == 0) {
- printk(KERN_ERR "Can't support LVDS on pipe A\n");
- return false;
- }
- if (IS_MRST(dev) && psb_intel_crtc->pipe != 0) {
- printk(KERN_ERR "Must use PIPE A\n");
- return false;
- }
- /* Should never happen!! */
- list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
- head) {
- if (tmp_encoder != encoder
- && tmp_encoder->crtc == encoder->crtc) {
- printk(KERN_ERR "Can't enable LVDS and another "
- "encoder on the same pipe\n");
- return false;
- }
- }
-
- /*
- * If we have timings from the BIOS for the panel, put them in
- * to the adjusted mode. The CRTC will be set up for this mode,
- * with the panel scaling set up to source from the H/VDisplay
- * of the original mode.
- */
- if (panel_fixed_mode != NULL) {
- adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
- adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
- adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
- adjusted_mode->htotal = panel_fixed_mode->htotal;
- adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
- adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
- adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
- adjusted_mode->vtotal = panel_fixed_mode->vtotal;
- adjusted_mode->clock = panel_fixed_mode->clock;
- drm_mode_set_crtcinfo(adjusted_mode,
- CRTC_INTERLACE_HALVE_V);
- }
-
- /*
- * XXX: It would be nice to support lower refresh rates on the
- * panels to reduce power consumption, and perhaps match the
- * user's requested refresh rate.
- */
-
- return true;
-}
-
-static void psb_intel_lvds_prepare(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
- struct psb_intel_mode_device *mode_dev = output->mode_dev;
-
- if (!gma_power_begin(dev, true))
- return;
-
- mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
- mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
- BACKLIGHT_DUTY_CYCLE_MASK);
-
- psb_intel_lvds_set_power(dev, output, false);
-
- gma_power_end(dev);
-}
-
-static void psb_intel_lvds_commit(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
- struct psb_intel_mode_device *mode_dev = output->mode_dev;
-
- if (mode_dev->backlight_duty_cycle == 0)
- mode_dev->backlight_duty_cycle =
- psb_intel_lvds_get_max_backlight(dev);
-
- psb_intel_lvds_set_power(dev, output, true);
-}
-
-static void psb_intel_lvds_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 pfit_control;
-
- /*
- * The LVDS pin pair will already have been turned on in the
- * psb_intel_crtc_mode_set since it has a large impact on the DPLL
- * settings.
- */
-
- /*
- * Enable automatic panel scaling so that non-native modes fill the
- * screen. Should be enabled before the pipe is enabled, according to
- * register description and PRM.
- */
- if (mode->hdisplay != adjusted_mode->hdisplay ||
- mode->vdisplay != adjusted_mode->vdisplay)
- pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
- HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
- HORIZ_INTERP_BILINEAR);
- else
- pfit_control = 0;
-
- if (dev_priv->lvds_dither)
- pfit_control |= PANEL_8TO6_DITHER_ENABLE;
-
- REG_WRITE(PFIT_CONTROL, pfit_control);
-}
-
-/*
- * Detect the LVDS connection.
- *
- * This always returns CONNECTOR_STATUS_CONNECTED.
- * This connector should only have
- * been set up if the LVDS was actually connected anyway.
- */
-static enum drm_connector_status psb_intel_lvds_detect(struct drm_connector
- *connector, bool force)
-{
- return connector_status_connected;
-}
-
-/*
- * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
- */
-static int psb_intel_lvds_get_modes(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- struct psb_intel_mode_device *mode_dev =
- psb_intel_output->mode_dev;
- int ret = 0;
-
- if (!IS_MRST(dev))
- ret = psb_intel_ddc_get_modes(psb_intel_output);
-
- if (ret)
- return ret;
-
- /* Didn't get an EDID, so
- * Set wide sync ranges so we get all modes
- * handed to valid_mode for checking
- */
- connector->display_info.min_vfreq = 0;
- connector->display_info.max_vfreq = 200;
- connector->display_info.min_hfreq = 0;
- connector->display_info.max_hfreq = 200;
-
- if (mode_dev->panel_fixed_mode != NULL) {
- struct drm_display_mode *mode =
- drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
- drm_mode_probed_add(connector, mode);
- return 1;
- }
-
- return 0;
-}
-
-/**
- * psb_intel_lvds_destroy - unregister and free LVDS structures
- * @connector: connector to free
- *
- * Unregister the DDC bus for this connector then free the driver private
- * structure.
- */
-void psb_intel_lvds_destroy(struct drm_connector *connector)
-{
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
-
- if (psb_intel_output->ddc_bus)
- psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
- drm_sysfs_connector_remove(connector);
- drm_connector_cleanup(connector);
- kfree(connector);
-}
-
-int psb_intel_lvds_set_property(struct drm_connector *connector,
- struct drm_property *property,
- uint64_t value)
-{
- struct drm_encoder *encoder = connector->encoder;
-
- if (!encoder)
- return -1;
-
- if (!strcmp(property->name, "scaling mode")) {
- struct psb_intel_crtc *crtc =
- to_psb_intel_crtc(encoder->crtc);
- uint64_t curval;
-
- if (!crtc)
- goto set_prop_error;
-
- switch (value) {
- case DRM_MODE_SCALE_FULLSCREEN:
- break;
- case DRM_MODE_SCALE_NO_SCALE:
- break;
- case DRM_MODE_SCALE_ASPECT:
- break;
- default:
- goto set_prop_error;
- }
-
- if (drm_connector_property_get_value(connector,
- property,
- &curval))
- goto set_prop_error;
-
- if (curval == value)
- goto set_prop_done;
-
- if (drm_connector_property_set_value(connector,
- property,
- value))
- goto set_prop_error;
-
- if (crtc->saved_mode.hdisplay != 0 &&
- crtc->saved_mode.vdisplay != 0) {
- if (!drm_crtc_helper_set_mode(encoder->crtc,
- &crtc->saved_mode,
- encoder->crtc->x,
- encoder->crtc->y,
- encoder->crtc->fb))
- goto set_prop_error;
- }
- } else if (!strcmp(property->name, "backlight")) {
- if (drm_connector_property_set_value(connector,
- property,
- value))
- goto set_prop_error;
- else {
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- struct drm_psb_private *devp =
- encoder->dev->dev_private;
- struct backlight_device *bd = devp->backlight_device;
- if (bd) {
- bd->props.brightness = value;
- backlight_update_status(bd);
- }
-#endif
- }
- } else if (!strcmp(property->name, "DPMS")) {
- struct drm_encoder_helper_funcs *hfuncs
- = encoder->helper_private;
- hfuncs->dpms(encoder, value);
- }
-
-set_prop_done:
- return 0;
-set_prop_error:
- return -1;
-}
-
-static const struct drm_encoder_helper_funcs psb_intel_lvds_helper_funcs = {
- .dpms = psb_intel_lvds_encoder_dpms,
- .mode_fixup = psb_intel_lvds_mode_fixup,
- .prepare = psb_intel_lvds_prepare,
- .mode_set = psb_intel_lvds_mode_set,
- .commit = psb_intel_lvds_commit,
-};
-
-const struct drm_connector_helper_funcs
- psb_intel_lvds_connector_helper_funcs = {
- .get_modes = psb_intel_lvds_get_modes,
- .mode_valid = psb_intel_lvds_mode_valid,
- .best_encoder = psb_intel_best_encoder,
-};
-
-const struct drm_connector_funcs psb_intel_lvds_connector_funcs = {
- .dpms = drm_helper_connector_dpms,
- .save = psb_intel_lvds_save,
- .restore = psb_intel_lvds_restore,
- .detect = psb_intel_lvds_detect,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .set_property = psb_intel_lvds_set_property,
- .destroy = psb_intel_lvds_destroy,
-};
-
-
-static void psb_intel_lvds_enc_destroy(struct drm_encoder *encoder)
-{
- drm_encoder_cleanup(encoder);
-}
-
-const struct drm_encoder_funcs psb_intel_lvds_enc_funcs = {
- .destroy = psb_intel_lvds_enc_destroy,
-};
-
-
-
-/**
- * psb_intel_lvds_init - setup LVDS connectors on this device
- * @dev: drm device
- *
- * Create the connector, register the LVDS DDC bus, and try to figure out what
- * modes we can display on the LVDS panel (if present).
- */
-void psb_intel_lvds_init(struct drm_device *dev,
- struct psb_intel_mode_device *mode_dev)
-{
- struct psb_intel_output *psb_intel_output;
- struct psb_intel_lvds_priv *lvds_priv;
- struct drm_connector *connector;
- struct drm_encoder *encoder;
- struct drm_display_mode *scan; /* *modes, *bios_mode; */
- struct drm_crtc *crtc;
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 lvds;
- int pipe;
-
- psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
- if (!psb_intel_output)
- return;
-
- lvds_priv = kzalloc(sizeof(struct psb_intel_lvds_priv), GFP_KERNEL);
- if (!lvds_priv) {
- kfree(psb_intel_output);
- dev_err(dev->dev, "LVDS private allocation error\n");
- return;
- }
-
- psb_intel_output->dev_priv = lvds_priv;
- psb_intel_output->mode_dev = mode_dev;
-
- connector = &psb_intel_output->base;
- encoder = &psb_intel_output->enc;
- drm_connector_init(dev, &psb_intel_output->base,
- &psb_intel_lvds_connector_funcs,
- DRM_MODE_CONNECTOR_LVDS);
-
- drm_encoder_init(dev, &psb_intel_output->enc,
- &psb_intel_lvds_enc_funcs,
- DRM_MODE_ENCODER_LVDS);
-
- drm_mode_connector_attach_encoder(&psb_intel_output->base,
- &psb_intel_output->enc);
- psb_intel_output->type = INTEL_OUTPUT_LVDS;
-
- drm_encoder_helper_add(encoder, &psb_intel_lvds_helper_funcs);
- drm_connector_helper_add(connector,
- &psb_intel_lvds_connector_helper_funcs);
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
- connector->interlace_allowed = false;
- connector->doublescan_allowed = false;
-
- /*Attach connector properties*/
- drm_connector_attach_property(connector,
- dev->mode_config.scaling_mode_property,
- DRM_MODE_SCALE_FULLSCREEN);
- drm_connector_attach_property(connector,
- dev_priv->backlight_property,
- BRIGHTNESS_MAX_LEVEL);
-
- /*
- * Set up I2C bus
- * FIXME: distroy i2c_bus when exit
- */
- psb_intel_output->i2c_bus = psb_intel_i2c_create(dev,
- GPIOB,
- "LVDSBLC_B");
- if (!psb_intel_output->i2c_bus) {
- dev_printk(KERN_ERR,
- &dev->pdev->dev, "I2C bus registration failed.\n");
- goto failed_blc_i2c;
- }
- psb_intel_output->i2c_bus->slave_addr = 0x2C;
- dev_priv->lvds_i2c_bus = psb_intel_output->i2c_bus;
-
- /*
- * LVDS discovery:
- * 1) check for EDID on DDC
- * 2) check for VBT data
- * 3) check to see if LVDS is already on
- * if none of the above, no panel
- * 4) make sure lid is open
- * if closed, act like it's not there for now
- */
-
- /* Set up the DDC bus. */
- psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
- GPIOC,
- "LVDSDDC_C");
- if (!psb_intel_output->ddc_bus) {
- dev_printk(KERN_ERR, &dev->pdev->dev,
- "DDC bus registration " "failed.\n");
- goto failed_ddc;
- }
-
- /*
- * Attempt to get the fixed panel mode from DDC. Assume that the
- * preferred mode is the right one.
- */
- psb_intel_ddc_get_modes(psb_intel_output);
- list_for_each_entry(scan, &connector->probed_modes, head) {
- if (scan->type & DRM_MODE_TYPE_PREFERRED) {
- mode_dev->panel_fixed_mode =
- drm_mode_duplicate(dev, scan);
- goto out; /* FIXME: check for quirks */
- }
- }
-
- /* Failed to get EDID, what about VBT? do we need this? */
- if (mode_dev->vbt_mode)
- mode_dev->panel_fixed_mode =
- drm_mode_duplicate(dev, mode_dev->vbt_mode);
-
- if (!mode_dev->panel_fixed_mode)
- if (dev_priv->lfp_lvds_vbt_mode)
- mode_dev->panel_fixed_mode =
- drm_mode_duplicate(dev,
- dev_priv->lfp_lvds_vbt_mode);
-
- /*
- * If we didn't get EDID, try checking if the panel is already turned
- * on. If so, assume that whatever is currently programmed is the
- * correct mode.
- */
- lvds = REG_READ(LVDS);
- pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
- crtc = psb_intel_get_crtc_from_pipe(dev, pipe);
-
- if (crtc && (lvds & LVDS_PORT_EN)) {
- mode_dev->panel_fixed_mode =
- psb_intel_crtc_mode_get(dev, crtc);
- if (mode_dev->panel_fixed_mode) {
- mode_dev->panel_fixed_mode->type |=
- DRM_MODE_TYPE_PREFERRED;
- goto out; /* FIXME: check for quirks */
- }
- }
-
- /* If we still don't have a mode after all that, give up. */
- if (!mode_dev->panel_fixed_mode) {
- dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
- goto failed_find;
- }
-
- /*
- * Blacklist machines with BIOSes that list an LVDS panel without
- * actually having one.
- */
-out:
- drm_sysfs_connector_add(connector);
- return;
-
-failed_find:
- if (psb_intel_output->ddc_bus)
- psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
-failed_ddc:
- if (psb_intel_output->i2c_bus)
- psb_intel_i2c_destroy(psb_intel_output->i2c_bus);
-failed_blc_i2c:
- drm_encoder_cleanup(encoder);
- drm_connector_cleanup(connector);
- kfree(connector);
-}
-
+++ /dev/null
-/*
- * Copyright (c) 2007 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authers: Jesse Barnes <jesse.barnes@intel.com>
- */
-
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <drm/drmP.h>
-#include "psb_intel_drv.h"
-
-/**
- * psb_intel_ddc_probe
- *
- */
-bool psb_intel_ddc_probe(struct psb_intel_output *psb_intel_output)
-{
- u8 out_buf[] = { 0x0, 0x0 };
- u8 buf[2];
- int ret;
- struct i2c_msg msgs[] = {
- {
- .addr = 0x50,
- .flags = 0,
- .len = 1,
- .buf = out_buf,
- },
- {
- .addr = 0x50,
- .flags = I2C_M_RD,
- .len = 1,
- .buf = buf,
- }
- };
-
- ret = i2c_transfer(&psb_intel_output->ddc_bus->adapter, msgs, 2);
- if (ret == 2)
- return true;
-
- return false;
-}
-
-/**
- * psb_intel_ddc_get_modes - get modelist from monitor
- * @connector: DRM connector device to use
- *
- * Fetch the EDID information from @connector using the DDC bus.
- */
-int psb_intel_ddc_get_modes(struct psb_intel_output *psb_intel_output)
-{
- struct edid *edid;
- int ret = 0;
-
- edid =
- drm_get_edid(&psb_intel_output->base,
- &psb_intel_output->ddc_bus->adapter);
- if (edid) {
- drm_mode_connector_update_edid_property(&psb_intel_output->
- base, edid);
- ret = drm_add_edid_modes(&psb_intel_output->base, edid);
- kfree(edid);
- }
- return ret;
-}
+++ /dev/null
-/*
- * Copyright (c) 2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#ifndef __PSB_INTEL_REG_H__
-#define __PSB_INTEL_REG_H__
-
-#define BLC_PWM_CTL 0x61254
-#define BLC_PWM_CTL2 0x61250
-#define BLC_PWM_CTL_C 0x62254
-#define BLC_PWM_CTL2_C 0x62250
-#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
-/*
- * This is the most significant 15 bits of the number of backlight cycles in a
- * complete cycle of the modulated backlight control.
- *
- * The actual value is this field multiplied by two.
- */
-#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
-#define BLM_LEGACY_MODE (1 << 16)
-/*
- * This is the number of cycles out of the backlight modulation cycle for which
- * the backlight is on.
- *
- * This field must be no greater than the number of cycles in the complete
- * backlight modulation cycle.
- */
-#define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
-#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
-
-#define I915_GCFGC 0xf0
-#define I915_LOW_FREQUENCY_ENABLE (1 << 7)
-#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4)
-#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4)
-#define I915_DISPLAY_CLOCK_MASK (7 << 4)
-
-#define I855_HPLLCC 0xc0
-#define I855_CLOCK_CONTROL_MASK (3 << 0)
-#define I855_CLOCK_133_200 (0 << 0)
-#define I855_CLOCK_100_200 (1 << 0)
-#define I855_CLOCK_100_133 (2 << 0)
-#define I855_CLOCK_166_250 (3 << 0)
-
-/* I830 CRTC registers */
-#define HTOTAL_A 0x60000
-#define HBLANK_A 0x60004
-#define HSYNC_A 0x60008
-#define VTOTAL_A 0x6000c
-#define VBLANK_A 0x60010
-#define VSYNC_A 0x60014
-#define PIPEASRC 0x6001c
-#define BCLRPAT_A 0x60020
-#define VSYNCSHIFT_A 0x60028
-
-#define HTOTAL_B 0x61000
-#define HBLANK_B 0x61004
-#define HSYNC_B 0x61008
-#define VTOTAL_B 0x6100c
-#define VBLANK_B 0x61010
-#define VSYNC_B 0x61014
-#define PIPEBSRC 0x6101c
-#define BCLRPAT_B 0x61020
-#define VSYNCSHIFT_B 0x61028
-
-#define HTOTAL_C 0x62000
-#define HBLANK_C 0x62004
-#define HSYNC_C 0x62008
-#define VTOTAL_C 0x6200c
-#define VBLANK_C 0x62010
-#define VSYNC_C 0x62014
-#define PIPECSRC 0x6201c
-#define BCLRPAT_C 0x62020
-#define VSYNCSHIFT_C 0x62028
-
-#define PP_STATUS 0x61200
-# define PP_ON (1 << 31)
-/*
- * Indicates that all dependencies of the panel are on:
- *
- * - PLL enabled
- * - pipe enabled
- * - LVDS/DVOB/DVOC on
- */
-#define PP_READY (1 << 30)
-#define PP_SEQUENCE_NONE (0 << 28)
-#define PP_SEQUENCE_ON (1 << 28)
-#define PP_SEQUENCE_OFF (2 << 28)
-#define PP_SEQUENCE_MASK 0x30000000
-#define PP_CONTROL 0x61204
-#define POWER_TARGET_ON (1 << 0)
-
-#define LVDSPP_ON 0x61208
-#define LVDSPP_OFF 0x6120c
-#define PP_CYCLE 0x61210
-
-#define PFIT_CONTROL 0x61230
-#define PFIT_ENABLE (1 << 31)
-#define PFIT_PIPE_MASK (3 << 29)
-#define PFIT_PIPE_SHIFT 29
-#define PFIT_SCALING_MODE_PILLARBOX (1 << 27)
-#define PFIT_SCALING_MODE_LETTERBOX (3 << 26)
-#define VERT_INTERP_DISABLE (0 << 10)
-#define VERT_INTERP_BILINEAR (1 << 10)
-#define VERT_INTERP_MASK (3 << 10)
-#define VERT_AUTO_SCALE (1 << 9)
-#define HORIZ_INTERP_DISABLE (0 << 6)
-#define HORIZ_INTERP_BILINEAR (1 << 6)
-#define HORIZ_INTERP_MASK (3 << 6)
-#define HORIZ_AUTO_SCALE (1 << 5)
-#define PANEL_8TO6_DITHER_ENABLE (1 << 3)
-
-#define PFIT_PGM_RATIOS 0x61234
-#define PFIT_VERT_SCALE_MASK 0xfff00000
-#define PFIT_HORIZ_SCALE_MASK 0x0000fff0
-
-#define PFIT_AUTO_RATIOS 0x61238
-
-#define DPLL_A 0x06014
-#define DPLL_B 0x06018
-#define DPLL_VCO_ENABLE (1 << 31)
-#define DPLL_DVO_HIGH_SPEED (1 << 30)
-#define DPLL_SYNCLOCK_ENABLE (1 << 29)
-#define DPLL_VGA_MODE_DIS (1 << 28)
-#define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */
-#define DPLLB_MODE_LVDS (2 << 26) /* i915 */
-#define DPLL_MODE_MASK (3 << 26)
-#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */
-#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */
-#define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */
-#define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */
-#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
-#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
-#define DPLL_LOCK (1 << 15) /* CDV */
-
-/*
- * The i830 generation, in DAC/serial mode, defines p1 as two plus this
- * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set.
- */
-# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000
-/*
- * The i830 generation, in LVDS mode, defines P1 as the bit number set within
- * this field (only one bit may be set).
- */
-#define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000
-#define DPLL_FPA01_P1_POST_DIV_SHIFT 16
-#define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required
- * in DVO non-gang */
-# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */
-#define PLL_REF_INPUT_DREFCLK (0 << 13)
-#define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */
-#define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO
- * TVCLKIN */
-#define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
-#define PLL_REF_INPUT_MASK (3 << 13)
-#define PLL_LOAD_PULSE_PHASE_SHIFT 9
-/*
- * Parallel to Serial Load Pulse phase selection.
- * Selects the phase for the 10X DPLL clock for the PCIe
- * digital display port. The range is 4 to 13; 10 or more
- * is just a flip delay. The default is 6
- */
-#define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
-#define DISPLAY_RATE_SELECT_FPA1 (1 << 8)
-
-/*
- * SDVO multiplier for 945G/GM. Not used on 965.
- *
- * DPLL_MD_UDI_MULTIPLIER_MASK
- */
-#define SDVO_MULTIPLIER_MASK 0x000000ff
-#define SDVO_MULTIPLIER_SHIFT_HIRES 4
-#define SDVO_MULTIPLIER_SHIFT_VGA 0
-
-/*
- * PLL_MD
- */
-/* Pipe A SDVO/UDI clock multiplier/divider register for G965. */
-#define DPLL_A_MD 0x0601c
-/* Pipe B SDVO/UDI clock multiplier/divider register for G965. */
-#define DPLL_B_MD 0x06020
-/*
- * UDI pixel divider, controlling how many pixels are stuffed into a packet.
- *
- * Value is pixels minus 1. Must be set to 1 pixel for SDVO.
- */
-#define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000
-#define DPLL_MD_UDI_DIVIDER_SHIFT 24
-/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
-#define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000
-#define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16
-/*
- * SDVO/UDI pixel multiplier.
- *
- * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
- * clock rate is 10 times the DPLL clock. At low resolution/refresh rate
- * modes, the bus rate would be below the limits, so SDVO allows for stuffing
- * dummy bytes in the datastream at an increased clock rate, with both sides of
- * the link knowing how many bytes are fill.
- *
- * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
- * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be
- * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
- * through an SDVO command.
- *
- * This register field has values of multiplication factor minus 1, with
- * a maximum multiplier of 5 for SDVO.
- */
-#define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00
-#define DPLL_MD_UDI_MULTIPLIER_SHIFT 8
-/*
- * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
- * This best be set to the default value (3) or the CRT won't work. No,
- * I don't entirely understand what this does...
- */
-#define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f
-#define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
-
-#define DPLL_TEST 0x606c
-#define DPLLB_TEST_SDVO_DIV_1 (0 << 22)
-#define DPLLB_TEST_SDVO_DIV_2 (1 << 22)
-#define DPLLB_TEST_SDVO_DIV_4 (2 << 22)
-#define DPLLB_TEST_SDVO_DIV_MASK (3 << 22)
-#define DPLLB_TEST_N_BYPASS (1 << 19)
-#define DPLLB_TEST_M_BYPASS (1 << 18)
-#define DPLLB_INPUT_BUFFER_ENABLE (1 << 16)
-#define DPLLA_TEST_N_BYPASS (1 << 3)
-#define DPLLA_TEST_M_BYPASS (1 << 2)
-#define DPLLA_INPUT_BUFFER_ENABLE (1 << 0)
-
-#define ADPA 0x61100
-#define ADPA_DAC_ENABLE (1 << 31)
-#define ADPA_DAC_DISABLE 0
-#define ADPA_PIPE_SELECT_MASK (1 << 30)
-#define ADPA_PIPE_A_SELECT 0
-#define ADPA_PIPE_B_SELECT (1 << 30)
-#define ADPA_USE_VGA_HVPOLARITY (1 << 15)
-#define ADPA_SETS_HVPOLARITY 0
-#define ADPA_VSYNC_CNTL_DISABLE (1 << 11)
-#define ADPA_VSYNC_CNTL_ENABLE 0
-#define ADPA_HSYNC_CNTL_DISABLE (1 << 10)
-#define ADPA_HSYNC_CNTL_ENABLE 0
-#define ADPA_VSYNC_ACTIVE_HIGH (1 << 4)
-#define ADPA_VSYNC_ACTIVE_LOW 0
-#define ADPA_HSYNC_ACTIVE_HIGH (1 << 3)
-#define ADPA_HSYNC_ACTIVE_LOW 0
-
-#define FPA0 0x06040
-#define FPA1 0x06044
-#define FPB0 0x06048
-#define FPB1 0x0604c
-#define FP_N_DIV_MASK 0x003f0000
-#define FP_N_DIV_SHIFT 16
-#define FP_M1_DIV_MASK 0x00003f00
-#define FP_M1_DIV_SHIFT 8
-#define FP_M2_DIV_MASK 0x0000003f
-#define FP_M2_DIV_SHIFT 0
-
-#define PORT_HOTPLUG_EN 0x61110
-#define SDVOB_HOTPLUG_INT_EN (1 << 26)
-#define SDVOC_HOTPLUG_INT_EN (1 << 25)
-#define TV_HOTPLUG_INT_EN (1 << 18)
-#define CRT_HOTPLUG_INT_EN (1 << 9)
-#define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
-/* CDV.. */
-#define CRT_HOTPLUG_ACTIVATION_PERIOD_64 (1 << 8)
-#define CRT_HOTPLUG_DAC_ON_TIME_2M (0 << 7)
-#define CRT_HOTPLUG_DAC_ON_TIME_4M (1 << 7)
-#define CRT_HOTPLUG_VOLTAGE_COMPARE_40 (0 << 5)
-#define CRT_HOTPLUG_VOLTAGE_COMPARE_50 (1 << 5)
-#define CRT_HOTPLUG_VOLTAGE_COMPARE_60 (2 << 5)
-#define CRT_HOTPLUG_VOLTAGE_COMPARE_70 (3 << 5)
-#define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK (3 << 5)
-#define CRT_HOTPLUG_DETECT_DELAY_1G (0 << 4)
-#define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4)
-#define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2)
-#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2)
-#define CRT_HOTPLUG_DETECT_MASK 0x000000F8
-
-#define PORT_HOTPLUG_STAT 0x61114
-#define CRT_HOTPLUG_INT_STATUS (1 << 11)
-#define TV_HOTPLUG_INT_STATUS (1 << 10)
-#define CRT_HOTPLUG_MONITOR_MASK (3 << 8)
-#define CRT_HOTPLUG_MONITOR_COLOR (3 << 8)
-#define CRT_HOTPLUG_MONITOR_MONO (2 << 8)
-#define CRT_HOTPLUG_MONITOR_NONE (0 << 8)
-#define SDVOC_HOTPLUG_INT_STATUS (1 << 7)
-#define SDVOB_HOTPLUG_INT_STATUS (1 << 6)
-
-#define SDVOB 0x61140
-#define SDVOC 0x61160
-#define SDVO_ENABLE (1 << 31)
-#define SDVO_PIPE_B_SELECT (1 << 30)
-#define SDVO_STALL_SELECT (1 << 29)
-#define SDVO_INTERRUPT_ENABLE (1 << 26)
-
-/**
- * 915G/GM SDVO pixel multiplier.
- *
- * Programmed value is multiplier - 1, up to 5x.
- *
- * DPLL_MD_UDI_MULTIPLIER_MASK
- */
-#define SDVO_PORT_MULTIPLY_MASK (7 << 23)
-#define SDVO_PORT_MULTIPLY_SHIFT 23
-#define SDVO_PHASE_SELECT_MASK (15 << 19)
-#define SDVO_PHASE_SELECT_DEFAULT (6 << 19)
-#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18)
-#define SDVOC_GANG_MODE (1 << 16)
-#define SDVO_BORDER_ENABLE (1 << 7)
-#define SDVOB_PCIE_CONCURRENCY (1 << 3)
-#define SDVO_DETECTED (1 << 2)
-/* Bits to be preserved when writing */
-#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14))
-#define SDVOC_PRESERVE_MASK (1 << 17)
-
-/*
- * This register controls the LVDS output enable, pipe selection, and data
- * format selection.
- *
- * All of the clock/data pairs are force powered down by power sequencing.
- */
-#define LVDS 0x61180
-/*
- * Enables the LVDS port. This bit must be set before DPLLs are enabled, as
- * the DPLL semantics change when the LVDS is assigned to that pipe.
- */
-#define LVDS_PORT_EN (1 << 31)
-/* Selects pipe B for LVDS data. Must be set on pre-965. */
-#define LVDS_PIPEB_SELECT (1 << 30)
-
-/* Turns on border drawing to allow centered display. */
-#define LVDS_BORDER_EN (1 << 15)
-
-/*
- * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
- * pixel.
- */
-#define LVDS_A0A2_CLKA_POWER_MASK (3 << 8)
-#define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8)
-#define LVDS_A0A2_CLKA_POWER_UP (3 << 8)
-/*
- * Controls the A3 data pair, which contains the additional LSBs for 24 bit
- * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
- * on.
- */
-#define LVDS_A3_POWER_MASK (3 << 6)
-#define LVDS_A3_POWER_DOWN (0 << 6)
-#define LVDS_A3_POWER_UP (3 << 6)
-/*
- * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP
- * is set.
- */
-#define LVDS_CLKB_POWER_MASK (3 << 4)
-#define LVDS_CLKB_POWER_DOWN (0 << 4)
-#define LVDS_CLKB_POWER_UP (3 << 4)
-/*
- * Controls the B0-B3 data pairs. This must be set to match the DPLL p2
- * setting for whether we are in dual-channel mode. The B3 pair will
- * additionally only be powered up when LVDS_A3_POWER_UP is set.
- */
-#define LVDS_B0B3_POWER_MASK (3 << 2)
-#define LVDS_B0B3_POWER_DOWN (0 << 2)
-#define LVDS_B0B3_POWER_UP (3 << 2)
-
-#define PIPEACONF 0x70008
-#define PIPEACONF_ENABLE (1 << 31)
-#define PIPEACONF_DISABLE 0
-#define PIPEACONF_DOUBLE_WIDE (1 << 30)
-#define PIPECONF_ACTIVE (1 << 30)
-#define I965_PIPECONF_ACTIVE (1 << 30)
-#define PIPECONF_DSIPLL_LOCK (1 << 29)
-#define PIPEACONF_SINGLE_WIDE 0
-#define PIPEACONF_PIPE_UNLOCKED 0
-#define PIPEACONF_DSR (1 << 26)
-#define PIPEACONF_PIPE_LOCKED (1 << 25)
-#define PIPEACONF_PALETTE 0
-#define PIPECONF_FORCE_BORDER (1 << 25)
-#define PIPEACONF_GAMMA (1 << 24)
-#define PIPECONF_PROGRESSIVE (0 << 21)
-#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21)
-#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21)
-#define PIPECONF_PLANE_OFF (1 << 19)
-#define PIPECONF_CURSOR_OFF (1 << 18)
-
-#define PIPEBCONF 0x71008
-#define PIPEBCONF_ENABLE (1 << 31)
-#define PIPEBCONF_DISABLE 0
-#define PIPEBCONF_DOUBLE_WIDE (1 << 30)
-#define PIPEBCONF_DISABLE 0
-#define PIPEBCONF_GAMMA (1 << 24)
-#define PIPEBCONF_PALETTE 0
-
-#define PIPECCONF 0x72008
-
-#define PIPEBGCMAXRED 0x71010
-#define PIPEBGCMAXGREEN 0x71014
-#define PIPEBGCMAXBLUE 0x71018
-
-#define PIPEASTAT 0x70024
-#define PIPEBSTAT 0x71024
-#define PIPECSTAT 0x72024
-#define PIPE_VBLANK_INTERRUPT_STATUS (1UL << 1)
-#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL << 2)
-#define PIPE_VBLANK_CLEAR (1 << 1)
-#define PIPE_VBLANK_STATUS (1 << 1)
-#define PIPE_TE_STATUS (1UL << 6)
-#define PIPE_DPST_EVENT_STATUS (1UL << 7)
-#define PIPE_VSYNC_CLEAR (1UL << 9)
-#define PIPE_VSYNC_STATUS (1UL << 9)
-#define PIPE_HDMI_AUDIO_UNDERRUN_STATUS (1UL << 10)
-#define PIPE_HDMI_AUDIO_BUFFER_DONE_STATUS (1UL << 11)
-#define PIPE_VBLANK_INTERRUPT_ENABLE (1UL << 17)
-#define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL << 18)
-#define PIPE_TE_ENABLE (1UL << 22)
-#define PIPE_DPST_EVENT_ENABLE (1UL << 23)
-#define PIPE_VSYNC_ENABL (1UL << 25)
-#define PIPE_HDMI_AUDIO_UNDERRUN (1UL << 26)
-#define PIPE_HDMI_AUDIO_BUFFER_DONE (1UL << 27)
-#define PIPE_HDMI_AUDIO_INT_MASK (PIPE_HDMI_AUDIO_UNDERRUN | \
- PIPE_HDMI_AUDIO_BUFFER_DONE)
-#define PIPE_EVENT_MASK ((1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)|(1 << 22)|(1 << 21)|(1 << 20)|(1 << 16))
-#define PIPE_VBLANK_MASK ((1 << 25)|(1 << 24)|(1 << 18)|(1 << 17))
-#define HISTOGRAM_INT_CONTROL 0x61268
-#define HISTOGRAM_BIN_DATA 0X61264
-#define HISTOGRAM_LOGIC_CONTROL 0x61260
-#define PWM_CONTROL_LOGIC 0x61250
-#define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL << 10)
-#define HISTOGRAM_INTERRUPT_ENABLE (1UL << 31)
-#define HISTOGRAM_LOGIC_ENABLE (1UL << 31)
-#define PWM_LOGIC_ENABLE (1UL << 31)
-#define PWM_PHASEIN_ENABLE (1UL << 25)
-#define PWM_PHASEIN_INT_ENABLE (1UL << 24)
-#define PWM_PHASEIN_VB_COUNT 0x00001f00
-#define PWM_PHASEIN_INC 0x0000001f
-#define HISTOGRAM_INT_CTRL_CLEAR (1UL << 30)
-#define DPST_YUV_LUMA_MODE 0
-
-struct dpst_ie_histogram_control {
- union {
- uint32_t data;
- struct {
- uint32_t bin_reg_index:7;
- uint32_t reserved:4;
- uint32_t bin_reg_func_select:1;
- uint32_t sync_to_phase_in:1;
- uint32_t alt_enhancement_mode:2;
- uint32_t reserved1:1;
- uint32_t sync_to_phase_in_count:8;
- uint32_t histogram_mode_select:1;
- uint32_t reserved2:4;
- uint32_t ie_pipe_assignment:1;
- uint32_t ie_mode_table_enabled:1;
- uint32_t ie_histogram_enable:1;
- };
- };
-};
-
-struct dpst_guardband {
- union {
- uint32_t data;
- struct {
- uint32_t guardband:22;
- uint32_t guardband_interrupt_delay:8;
- uint32_t interrupt_status:1;
- uint32_t interrupt_enable:1;
- };
- };
-};
-
-#define PIPEAFRAMEHIGH 0x70040
-#define PIPEAFRAMEPIXEL 0x70044
-#define PIPEBFRAMEHIGH 0x71040
-#define PIPEBFRAMEPIXEL 0x71044
-#define PIPECFRAMEHIGH 0x72040
-#define PIPECFRAMEPIXEL 0x72044
-#define PIPE_FRAME_HIGH_MASK 0x0000ffff
-#define PIPE_FRAME_HIGH_SHIFT 0
-#define PIPE_FRAME_LOW_MASK 0xff000000
-#define PIPE_FRAME_LOW_SHIFT 24
-#define PIPE_PIXEL_MASK 0x00ffffff
-#define PIPE_PIXEL_SHIFT 0
-
-#define DSPARB 0x70030
-#define DSPFW1 0x70034
-#define DSPFW2 0x70038
-#define DSPFW3 0x7003c
-#define DSPFW4 0x70050
-#define DSPFW5 0x70054
-#define DSPFW6 0x70058
-#define DSPCHICKENBIT 0x70400
-#define DSPACNTR 0x70180
-#define DSPBCNTR 0x71180
-#define DSPCCNTR 0x72180
-#define DISPLAY_PLANE_ENABLE (1 << 31)
-#define DISPLAY_PLANE_DISABLE 0
-#define DISPPLANE_GAMMA_ENABLE (1 << 30)
-#define DISPPLANE_GAMMA_DISABLE 0
-#define DISPPLANE_PIXFORMAT_MASK (0xf << 26)
-#define DISPPLANE_8BPP (0x2 << 26)
-#define DISPPLANE_15_16BPP (0x4 << 26)
-#define DISPPLANE_16BPP (0x5 << 26)
-#define DISPPLANE_32BPP_NO_ALPHA (0x6 << 26)
-#define DISPPLANE_32BPP (0x7 << 26)
-#define DISPPLANE_STEREO_ENABLE (1 << 25)
-#define DISPPLANE_STEREO_DISABLE 0
-#define DISPPLANE_SEL_PIPE_MASK (1 << 24)
-#define DISPPLANE_SEL_PIPE_POS 24
-#define DISPPLANE_SEL_PIPE_A 0
-#define DISPPLANE_SEL_PIPE_B (1 << 24)
-#define DISPPLANE_SRC_KEY_ENABLE (1 << 22)
-#define DISPPLANE_SRC_KEY_DISABLE 0
-#define DISPPLANE_LINE_DOUBLE (1 << 20)
-#define DISPPLANE_NO_LINE_DOUBLE 0
-#define DISPPLANE_STEREO_POLARITY_FIRST 0
-#define DISPPLANE_STEREO_POLARITY_SECOND (1 << 18)
-/* plane B only */
-#define DISPPLANE_ALPHA_TRANS_ENABLE (1 << 15)
-#define DISPPLANE_ALPHA_TRANS_DISABLE 0
-#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0
-#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1)
-#define DISPPLANE_BOTTOM (4)
-
-#define DSPABASE 0x70184
-#define DSPALINOFF 0x70184
-#define DSPASTRIDE 0x70188
-
-#define DSPBBASE 0x71184
-#define DSPBLINOFF 0X71184
-#define DSPBADDR DSPBBASE
-#define DSPBSTRIDE 0x71188
-
-#define DSPCBASE 0x72184
-#define DSPCLINOFF 0x72184
-#define DSPCSTRIDE 0x72188
-
-#define DSPAKEYVAL 0x70194
-#define DSPAKEYMASK 0x70198
-
-#define DSPAPOS 0x7018C /* reserved */
-#define DSPASIZE 0x70190
-#define DSPBPOS 0x7118C
-#define DSPBSIZE 0x71190
-#define DSPCPOS 0x7218C
-#define DSPCSIZE 0x72190
-
-#define DSPASURF 0x7019C
-#define DSPATILEOFF 0x701A4
-
-#define DSPBSURF 0x7119C
-#define DSPBTILEOFF 0x711A4
-
-#define DSPCSURF 0x7219C
-#define DSPCTILEOFF 0x721A4
-#define DSPCKEYMAXVAL 0x721A0
-#define DSPCKEYMINVAL 0x72194
-#define DSPCKEYMSK 0x72198
-
-#define VGACNTRL 0x71400
-#define VGA_DISP_DISABLE (1 << 31)
-#define VGA_2X_MODE (1 << 30)
-#define VGA_PIPE_B_SELECT (1 << 29)
-
-/*
- * Overlay registers
- */
-#define OV_C_OFFSET 0x08000
-#define OV_OVADD 0x30000
-#define OV_DOVASTA 0x30008
-# define OV_PIPE_SELECT ((1 << 6)|(1 << 7))
-# define OV_PIPE_SELECT_POS 6
-# define OV_PIPE_A 0
-# define OV_PIPE_C 1
-#define OV_OGAMC5 0x30010
-#define OV_OGAMC4 0x30014
-#define OV_OGAMC3 0x30018
-#define OV_OGAMC2 0x3001C
-#define OV_OGAMC1 0x30020
-#define OV_OGAMC0 0x30024
-#define OVC_OVADD 0x38000
-#define OVC_DOVCSTA 0x38008
-#define OVC_OGAMC5 0x38010
-#define OVC_OGAMC4 0x38014
-#define OVC_OGAMC3 0x38018
-#define OVC_OGAMC2 0x3801C
-#define OVC_OGAMC1 0x38020
-#define OVC_OGAMC0 0x38024
-
-/*
- * Some BIOS scratch area registers. The 845 (and 830?) store the amount
- * of video memory available to the BIOS in SWF1.
- */
-#define SWF0 0x71410
-#define SWF1 0x71414
-#define SWF2 0x71418
-#define SWF3 0x7141c
-#define SWF4 0x71420
-#define SWF5 0x71424
-#define SWF6 0x71428
-
-/*
- * 855 scratch registers.
- */
-#define SWF00 0x70410
-#define SWF01 0x70414
-#define SWF02 0x70418
-#define SWF03 0x7041c
-#define SWF04 0x70420
-#define SWF05 0x70424
-#define SWF06 0x70428
-
-#define SWF10 SWF0
-#define SWF11 SWF1
-#define SWF12 SWF2
-#define SWF13 SWF3
-#define SWF14 SWF4
-#define SWF15 SWF5
-#define SWF16 SWF6
-
-#define SWF30 0x72414
-#define SWF31 0x72418
-#define SWF32 0x7241c
-
-
-/*
- * Palette registers
- */
-#define PALETTE_A 0x0a000
-#define PALETTE_B 0x0a800
-#define PALETTE_C 0x0ac00
-
-/* Cursor A & B regs */
-#define CURACNTR 0x70080
-#define CURSOR_MODE_DISABLE 0x00
-#define CURSOR_MODE_64_32B_AX 0x07
-#define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
-#define MCURSOR_GAMMA_ENABLE (1 << 26)
-#define CURABASE 0x70084
-#define CURAPOS 0x70088
-#define CURSOR_POS_MASK 0x007FF
-#define CURSOR_POS_SIGN 0x8000
-#define CURSOR_X_SHIFT 0
-#define CURSOR_Y_SHIFT 16
-#define CURBCNTR 0x700c0
-#define CURBBASE 0x700c4
-#define CURBPOS 0x700c8
-#define CURCCNTR 0x700e0
-#define CURCBASE 0x700e4
-#define CURCPOS 0x700e8
-
-/*
- * Interrupt Registers
- */
-#define IER 0x020a0
-#define IIR 0x020a4
-#define IMR 0x020a8
-#define ISR 0x020ac
-
-/*
- * MOORESTOWN delta registers
- */
-#define MRST_DPLL_A 0x0f014
-#define MDFLD_DPLL_B 0x0f018
-#define MDFLD_INPUT_REF_SEL (1 << 14)
-#define MDFLD_VCO_SEL (1 << 16)
-#define DPLLA_MODE_LVDS (2 << 26) /* mrst */
-#define MDFLD_PLL_LATCHEN (1 << 28)
-#define MDFLD_PWR_GATE_EN (1 << 30)
-#define MDFLD_P1_MASK (0x1FF << 17)
-#define MRST_FPA0 0x0f040
-#define MRST_FPA1 0x0f044
-#define MDFLD_DPLL_DIV0 0x0f048
-#define MDFLD_DPLL_DIV1 0x0f04c
-#define MRST_PERF_MODE 0x020f4
-
-/*
- * MEDFIELD HDMI registers
- */
-#define HDMIPHYMISCCTL 0x61134
-#define HDMI_PHY_POWER_DOWN 0x7f
-#define HDMIB_CONTROL 0x61140
-#define HDMIB_PORT_EN (1 << 31)
-#define HDMIB_PIPE_B_SELECT (1 << 30)
-#define HDMIB_NULL_PACKET (1 << 9)
-#define HDMIB_HDCP_PORT (1 << 5)
-
-/* #define LVDS 0x61180 */
-#define MRST_PANEL_8TO6_DITHER_ENABLE (1 << 25)
-#define MRST_PANEL_24_DOT_1_FORMAT (1 << 24)
-#define LVDS_A3_POWER_UP_0_OUTPUT (1 << 6)
-
-#define MIPI 0x61190
-#define MIPI_C 0x62190
-#define MIPI_PORT_EN (1 << 31)
-/* Turns on border drawing to allow centered display. */
-#define SEL_FLOPPED_HSTX (1 << 23)
-#define PASS_FROM_SPHY_TO_AFE (1 << 16)
-#define MIPI_BORDER_EN (1 << 15)
-#define MIPIA_3LANE_MIPIC_1LANE 0x1
-#define MIPIA_2LANE_MIPIC_2LANE 0x2
-#define TE_TRIGGER_DSI_PROTOCOL (1 << 2)
-#define TE_TRIGGER_GPIO_PIN (1 << 3)
-#define MIPI_TE_COUNT 0x61194
-
-/* #define PP_CONTROL 0x61204 */
-#define POWER_DOWN_ON_RESET (1 << 1)
-
-/* #define PFIT_CONTROL 0x61230 */
-#define PFIT_PIPE_SELECT (3 << 29)
-#define PFIT_PIPE_SELECT_SHIFT (29)
-
-/* #define BLC_PWM_CTL 0x61254 */
-#define MRST_BACKLIGHT_MODULATION_FREQ_SHIFT (16)
-#define MRST_BACKLIGHT_MODULATION_FREQ_MASK (0xffff << 16)
-
-/* #define PIPEACONF 0x70008 */
-#define PIPEACONF_PIPE_STATE (1 << 30)
-/* #define DSPACNTR 0x70180 */
-
-#define MRST_DSPABASE 0x7019c
-#define MRST_DSPBBASE 0x7119c
-#define MDFLD_DSPCBASE 0x7219c
-
-/*
- * Moorestown registers.
- */
-
-/*
- * MIPI IP registers
- */
-#define MIPIC_REG_OFFSET 0x800
-
-#define DEVICE_READY_REG 0xb000
-#define LP_OUTPUT_HOLD (1 << 16)
-#define EXIT_ULPS_DEV_READY 0x3
-#define LP_OUTPUT_HOLD_RELEASE 0x810000
-# define ENTERING_ULPS (2 << 1)
-# define EXITING_ULPS (1 << 1)
-# define ULPS_MASK (3 << 1)
-# define BUS_POSSESSION (1 << 3)
-#define INTR_STAT_REG 0xb004
-#define RX_SOT_ERROR (1 << 0)
-#define RX_SOT_SYNC_ERROR (1 << 1)
-#define RX_ESCAPE_MODE_ENTRY_ERROR (1 << 3)
-#define RX_LP_TX_SYNC_ERROR (1 << 4)
-#define RX_HS_RECEIVE_TIMEOUT_ERROR (1 << 5)
-#define RX_FALSE_CONTROL_ERROR (1 << 6)
-#define RX_ECC_SINGLE_BIT_ERROR (1 << 7)
-#define RX_ECC_MULTI_BIT_ERROR (1 << 8)
-#define RX_CHECKSUM_ERROR (1 << 9)
-#define RX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 10)
-#define RX_DSI_VC_ID_INVALID (1 << 11)
-#define TX_FALSE_CONTROL_ERROR (1 << 12)
-#define TX_ECC_SINGLE_BIT_ERROR (1 << 13)
-#define TX_ECC_MULTI_BIT_ERROR (1 << 14)
-#define TX_CHECKSUM_ERROR (1 << 15)
-#define TX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 16)
-#define TX_DSI_VC_ID_INVALID (1 << 17)
-#define HIGH_CONTENTION (1 << 18)
-#define LOW_CONTENTION (1 << 19)
-#define DPI_FIFO_UNDER_RUN (1 << 20)
-#define HS_TX_TIMEOUT (1 << 21)
-#define LP_RX_TIMEOUT (1 << 22)
-#define TURN_AROUND_ACK_TIMEOUT (1 << 23)
-#define ACK_WITH_NO_ERROR (1 << 24)
-#define HS_GENERIC_WR_FIFO_FULL (1 << 27)
-#define LP_GENERIC_WR_FIFO_FULL (1 << 28)
-#define SPL_PKT_SENT (1 << 30)
-#define INTR_EN_REG 0xb008
-#define DSI_FUNC_PRG_REG 0xb00c
-#define DPI_CHANNEL_NUMBER_POS 0x03
-#define DBI_CHANNEL_NUMBER_POS 0x05
-#define FMT_DPI_POS 0x07
-#define FMT_DBI_POS 0x0A
-#define DBI_DATA_WIDTH_POS 0x0D
-
-/* DPI PIXEL FORMATS */
-#define RGB_565_FMT 0x01 /* RGB 565 FORMAT */
-#define RGB_666_FMT 0x02 /* RGB 666 FORMAT */
-#define LRGB_666_FMT 0x03 /* RGB LOOSELY PACKED
- * 666 FORMAT
- */
-#define RGB_888_FMT 0x04 /* RGB 888 FORMAT */
-#define VIRTUAL_CHANNEL_NUMBER_0 0x00 /* Virtual channel 0 */
-#define VIRTUAL_CHANNEL_NUMBER_1 0x01 /* Virtual channel 1 */
-#define VIRTUAL_CHANNEL_NUMBER_2 0x02 /* Virtual channel 2 */
-#define VIRTUAL_CHANNEL_NUMBER_3 0x03 /* Virtual channel 3 */
-
-#define DBI_NOT_SUPPORTED 0x00 /* command mode
- * is not supported
- */
-#define DBI_DATA_WIDTH_16BIT 0x01 /* 16 bit data */
-#define DBI_DATA_WIDTH_9BIT 0x02 /* 9 bit data */
-#define DBI_DATA_WIDTH_8BIT 0x03 /* 8 bit data */
-#define DBI_DATA_WIDTH_OPT1 0x04 /* option 1 */
-#define DBI_DATA_WIDTH_OPT2 0x05 /* option 2 */
-
-#define HS_TX_TIMEOUT_REG 0xb010
-#define LP_RX_TIMEOUT_REG 0xb014
-#define TURN_AROUND_TIMEOUT_REG 0xb018
-#define DEVICE_RESET_REG 0xb01C
-#define DPI_RESOLUTION_REG 0xb020
-#define RES_V_POS 0x10
-#define DBI_RESOLUTION_REG 0xb024 /* Reserved for MDFLD */
-#define HORIZ_SYNC_PAD_COUNT_REG 0xb028
-#define HORIZ_BACK_PORCH_COUNT_REG 0xb02C
-#define HORIZ_FRONT_PORCH_COUNT_REG 0xb030
-#define HORIZ_ACTIVE_AREA_COUNT_REG 0xb034
-#define VERT_SYNC_PAD_COUNT_REG 0xb038
-#define VERT_BACK_PORCH_COUNT_REG 0xb03c
-#define VERT_FRONT_PORCH_COUNT_REG 0xb040
-#define HIGH_LOW_SWITCH_COUNT_REG 0xb044
-#define DPI_CONTROL_REG 0xb048
-#define DPI_SHUT_DOWN (1 << 0)
-#define DPI_TURN_ON (1 << 1)
-#define DPI_COLOR_MODE_ON (1 << 2)
-#define DPI_COLOR_MODE_OFF (1 << 3)
-#define DPI_BACK_LIGHT_ON (1 << 4)
-#define DPI_BACK_LIGHT_OFF (1 << 5)
-#define DPI_LP (1 << 6)
-#define DPI_DATA_REG 0xb04c
-#define DPI_BACK_LIGHT_ON_DATA 0x07
-#define DPI_BACK_LIGHT_OFF_DATA 0x17
-#define INIT_COUNT_REG 0xb050
-#define MAX_RET_PAK_REG 0xb054
-#define VIDEO_FMT_REG 0xb058
-#define COMPLETE_LAST_PCKT (1 << 2)
-#define EOT_DISABLE_REG 0xb05c
-#define ENABLE_CLOCK_STOPPING (1 << 1)
-#define LP_BYTECLK_REG 0xb060
-#define LP_GEN_DATA_REG 0xb064
-#define HS_GEN_DATA_REG 0xb068
-#define LP_GEN_CTRL_REG 0xb06C
-#define HS_GEN_CTRL_REG 0xb070
-#define DCS_CHANNEL_NUMBER_POS 0x6
-#define MCS_COMMANDS_POS 0x8
-#define WORD_COUNTS_POS 0x8
-#define MCS_PARAMETER_POS 0x10
-#define GEN_FIFO_STAT_REG 0xb074
-#define HS_DATA_FIFO_FULL (1 << 0)
-#define HS_DATA_FIFO_HALF_EMPTY (1 << 1)
-#define HS_DATA_FIFO_EMPTY (1 << 2)
-#define LP_DATA_FIFO_FULL (1 << 8)
-#define LP_DATA_FIFO_HALF_EMPTY (1 << 9)
-#define LP_DATA_FIFO_EMPTY (1 << 10)
-#define HS_CTRL_FIFO_FULL (1 << 16)
-#define HS_CTRL_FIFO_HALF_EMPTY (1 << 17)
-#define HS_CTRL_FIFO_EMPTY (1 << 18)
-#define LP_CTRL_FIFO_FULL (1 << 24)
-#define LP_CTRL_FIFO_HALF_EMPTY (1 << 25)
-#define LP_CTRL_FIFO_EMPTY (1 << 26)
-#define DBI_FIFO_EMPTY (1 << 27)
-#define DPI_FIFO_EMPTY (1 << 28)
-#define HS_LS_DBI_ENABLE_REG 0xb078
-#define TXCLKESC_REG 0xb07c
-#define DPHY_PARAM_REG 0xb080
-#define DBI_BW_CTRL_REG 0xb084
-#define CLK_LANE_SWT_REG 0xb088
-
-/*
- * MIPI Adapter registers
- */
-#define MIPI_CONTROL_REG 0xb104
-#define MIPI_2X_CLOCK_BITS ((1 << 0) | (1 << 1))
-#define MIPI_DATA_ADDRESS_REG 0xb108
-#define MIPI_DATA_LENGTH_REG 0xb10C
-#define MIPI_COMMAND_ADDRESS_REG 0xb110
-#define MIPI_COMMAND_LENGTH_REG 0xb114
-#define MIPI_READ_DATA_RETURN_REG0 0xb118
-#define MIPI_READ_DATA_RETURN_REG1 0xb11C
-#define MIPI_READ_DATA_RETURN_REG2 0xb120
-#define MIPI_READ_DATA_RETURN_REG3 0xb124
-#define MIPI_READ_DATA_RETURN_REG4 0xb128
-#define MIPI_READ_DATA_RETURN_REG5 0xb12C
-#define MIPI_READ_DATA_RETURN_REG6 0xb130
-#define MIPI_READ_DATA_RETURN_REG7 0xb134
-#define MIPI_READ_DATA_VALID_REG 0xb138
-
-/* DBI COMMANDS */
-#define soft_reset 0x01
-/*
- * The display module performs a software reset.
- * Registers are written with their SW Reset default values.
- */
-#define get_power_mode 0x0a
-/*
- * The display module returns the current power mode
- */
-#define get_address_mode 0x0b
-/*
- * The display module returns the current status.
- */
-#define get_pixel_format 0x0c
-/*
- * This command gets the pixel format for the RGB image data
- * used by the interface.
- */
-#define get_display_mode 0x0d
-/*
- * The display module returns the Display Image Mode status.
- */
-#define get_signal_mode 0x0e
-/*
- * The display module returns the Display Signal Mode.
- */
-#define get_diagnostic_result 0x0f
-/*
- * The display module returns the self-diagnostic results following
- * a Sleep Out command.
- */
-#define enter_sleep_mode 0x10
-/*
- * This command causes the display module to enter the Sleep mode.
- * In this mode, all unnecessary blocks inside the display module are
- * disabled except interface communication. This is the lowest power
- * mode the display module supports.
- */
-#define exit_sleep_mode 0x11
-/*
- * This command causes the display module to exit Sleep mode.
- * All blocks inside the display module are enabled.
- */
-#define enter_partial_mode 0x12
-/*
- * This command causes the display module to enter the Partial Display
- * Mode. The Partial Display Mode window is described by the
- * set_partial_area command.
- */
-#define enter_normal_mode 0x13
-/*
- * This command causes the display module to enter the Normal mode.
- * Normal Mode is defined as Partial Display mode and Scroll mode are off
- */
-#define exit_invert_mode 0x20
-/*
- * This command causes the display module to stop inverting the image
- * data on the display device. The frame memory contents remain unchanged.
- * No status bits are changed.
- */
-#define enter_invert_mode 0x21
-/*
- * This command causes the display module to invert the image data only on
- * the display device. The frame memory contents remain unchanged.
- * No status bits are changed.
- */
-#define set_gamma_curve 0x26
-/*
- * This command selects the desired gamma curve for the display device.
- * Four fixed gamma curves are defined in section DCS spec.
- */
-#define set_display_off 0x28
-/* ************************************************************************* *\
-This command causes the display module to stop displaying the image data
-on the display device. The frame memory contents remain unchanged.
-No status bits are changed.
-\* ************************************************************************* */
-#define set_display_on 0x29
-/* ************************************************************************* *\
-This command causes the display module to start displaying the image data
-on the display device. The frame memory contents remain unchanged.
-No status bits are changed.
-\* ************************************************************************* */
-#define set_column_address 0x2a
-/*
- * This command defines the column extent of the frame memory accessed by
- * the hostprocessor with the read_memory_continue and
- * write_memory_continue commands.
- * No status bits are changed.
- */
-#define set_page_addr 0x2b
-/*
- * This command defines the page extent of the frame memory accessed by
- * the host processor with the write_memory_continue and
- * read_memory_continue command.
- * No status bits are changed.
- */
-#define write_mem_start 0x2c
-/*
- * This command transfers image data from the host processor to the
- * display modules frame memory starting at the pixel location specified
- * by preceding set_column_address and set_page_address commands.
- */
-#define set_partial_area 0x30
-/*
- * This command defines the Partial Display mode s display area.
- * There are two parameters associated with this command, the first
- * defines the Start Row (SR) and the second the End Row (ER). SR and ER
- * refer to the Frame Memory Line Pointer.
- */
-#define set_scroll_area 0x33
-/*
- * This command defines the display modules Vertical Scrolling Area.
- */
-#define set_tear_off 0x34
-/*
- * This command turns off the display modules Tearing Effect output
- * signal on the TE signal line.
- */
-#define set_tear_on 0x35
-/*
- * This command turns on the display modules Tearing Effect output signal
- * on the TE signal line.
- */
-#define set_address_mode 0x36
-/*
- * This command sets the data order for transfers from the host processor
- * to display modules frame memory,bits B[7:5] and B3, and from the
- * display modules frame memory to the display device, bits B[2:0] and B4.
- */
-#define set_scroll_start 0x37
-/*
- * This command sets the start of the vertical scrolling area in the frame
- * memory. The vertical scrolling area is fully defined when this command
- * is used with the set_scroll_area command The set_scroll_start command
- * has one parameter, the Vertical Scroll Pointer. The VSP defines the
- * line in the frame memory that is written to the display device as the
- * first line of the vertical scroll area.
- */
-#define exit_idle_mode 0x38
-/*
- * This command causes the display module to exit Idle mode.
- */
-#define enter_idle_mode 0x39
-/*
- * This command causes the display module to enter Idle Mode.
- * In Idle Mode, color expression is reduced. Colors are shown on the
- * display device using the MSB of each of the R, G and B color
- * components in the frame memory
- */
-#define set_pixel_format 0x3a
-/*
- * This command sets the pixel format for the RGB image data used by the
- * interface.
- * Bits D[6:4] DPI Pixel Format Definition
- * Bits D[2:0] DBI Pixel Format Definition
- * Bits D7 and D3 are not used.
- */
-#define DCS_PIXEL_FORMAT_3bpp 0x1
-#define DCS_PIXEL_FORMAT_8bpp 0x2
-#define DCS_PIXEL_FORMAT_12bpp 0x3
-#define DCS_PIXEL_FORMAT_16bpp 0x5
-#define DCS_PIXEL_FORMAT_18bpp 0x6
-#define DCS_PIXEL_FORMAT_24bpp 0x7
-
-#define write_mem_cont 0x3c
-
-/*
- * This command transfers image data from the host processor to the
- * display module's frame memory continuing from the pixel location
- * following the previous write_memory_continue or write_memory_start
- * command.
- */
-#define set_tear_scanline 0x44
-/*
- * This command turns on the display modules Tearing Effect output signal
- * on the TE signal line when the display module reaches line N.
- */
-#define get_scanline 0x45
-/*
- * The display module returns the current scanline, N, used to update the
- * display device. The total number of scanlines on a display device is
- * defined as VSYNC + VBP + VACT + VFP.The first scanline is defined as
- * the first line of V Sync and is denoted as Line 0.
- * When in Sleep Mode, the value returned by get_scanline is undefined.
- */
-
-/* MCS or Generic COMMANDS */
-/* MCS/generic data type */
-#define GEN_SHORT_WRITE_0 0x03 /* generic short write, no parameters */
-#define GEN_SHORT_WRITE_1 0x13 /* generic short write, 1 parameters */
-#define GEN_SHORT_WRITE_2 0x23 /* generic short write, 2 parameters */
-#define GEN_READ_0 0x04 /* generic read, no parameters */
-#define GEN_READ_1 0x14 /* generic read, 1 parameters */
-#define GEN_READ_2 0x24 /* generic read, 2 parameters */
-#define GEN_LONG_WRITE 0x29 /* generic long write */
-#define MCS_SHORT_WRITE_0 0x05 /* MCS short write, no parameters */
-#define MCS_SHORT_WRITE_1 0x15 /* MCS short write, 1 parameters */
-#define MCS_READ 0x06 /* MCS read, no parameters */
-#define MCS_LONG_WRITE 0x39 /* MCS long write */
-/* MCS/generic commands */
-/* TPO MCS */
-#define write_display_profile 0x50
-#define write_display_brightness 0x51
-#define write_ctrl_display 0x53
-#define write_ctrl_cabc 0x55
- #define UI_IMAGE 0x01
- #define STILL_IMAGE 0x02
- #define MOVING_IMAGE 0x03
-#define write_hysteresis 0x57
-#define write_gamma_setting 0x58
-#define write_cabc_min_bright 0x5e
-#define write_kbbc_profile 0x60
-/* TMD MCS */
-#define tmd_write_display_brightness 0x8c
-
-/*
- * This command is used to control ambient light, panel backlight
- * brightness and gamma settings.
- */
-#define BRIGHT_CNTL_BLOCK_ON (1 << 5)
-#define AMBIENT_LIGHT_SENSE_ON (1 << 4)
-#define DISPLAY_DIMMING_ON (1 << 3)
-#define BACKLIGHT_ON (1 << 2)
-#define DISPLAY_BRIGHTNESS_AUTO (1 << 1)
-#define GAMMA_AUTO (1 << 0)
-
-/* DCS Interface Pixel Formats */
-#define DCS_PIXEL_FORMAT_3BPP 0x1
-#define DCS_PIXEL_FORMAT_8BPP 0x2
-#define DCS_PIXEL_FORMAT_12BPP 0x3
-#define DCS_PIXEL_FORMAT_16BPP 0x5
-#define DCS_PIXEL_FORMAT_18BPP 0x6
-#define DCS_PIXEL_FORMAT_24BPP 0x7
-/* ONE PARAMETER READ DATA */
-#define addr_mode_data 0xfc
-#define diag_res_data 0x00
-#define disp_mode_data 0x23
-#define pxl_fmt_data 0x77
-#define pwr_mode_data 0x74
-#define sig_mode_data 0x00
-/* TWO PARAMETERS READ DATA */
-#define scanline_data1 0xff
-#define scanline_data2 0xff
-#define NON_BURST_MODE_SYNC_PULSE 0x01 /* Non Burst Mode
- * with Sync Pulse
- */
-#define NON_BURST_MODE_SYNC_EVENTS 0x02 /* Non Burst Mode
- * with Sync events
- */
-#define BURST_MODE 0x03 /* Burst Mode */
-#define DBI_COMMAND_BUFFER_SIZE 0x240 /* 0x32 */ /* 0x120 */
- /* Allocate at least
- * 0x100 Byte with 32
- * byte alignment
- */
-#define DBI_DATA_BUFFER_SIZE 0x120 /* Allocate at least
- * 0x100 Byte with 32
- * byte alignment
- */
-#define DBI_CB_TIME_OUT 0xFFFF
-
-#define GEN_FB_TIME_OUT 2000
-
-#define SKU_83 0x01
-#define SKU_100 0x02
-#define SKU_100L 0x04
-#define SKU_BYPASS 0x08
-
-/* Some handy macros for playing with bitfields. */
-#define PSB_MASK(high, low) (((1<<((high)-(low)+1))-1)<<(low))
-#define SET_FIELD(value, field) (((value) << field ## _SHIFT) & field ## _MASK)
-#define GET_FIELD(word, field) (((word) & field ## _MASK) >> field ## _SHIFT)
-
-#define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a)))
-
-/* PCI config space */
-
-#define SB_PCKT 0x02100 /* cedarview */
-# define SB_OPCODE_MASK PSB_MASK(31, 16)
-# define SB_OPCODE_SHIFT 16
-# define SB_OPCODE_READ 0
-# define SB_OPCODE_WRITE 1
-# define SB_DEST_MASK PSB_MASK(15, 8)
-# define SB_DEST_SHIFT 8
-# define SB_DEST_DPLL 0x88
-# define SB_BYTE_ENABLE_MASK PSB_MASK(7, 4)
-# define SB_BYTE_ENABLE_SHIFT 4
-# define SB_BUSY (1 << 0)
-
-
-/* 32-bit value read/written from the DPIO reg. */
-#define SB_DATA 0x02104 /* cedarview */
-/* 32-bit address of the DPIO reg to be read/written. */
-#define SB_ADDR 0x02108 /* cedarview */
-#define DPIO_CFG 0x02110 /* cedarview */
-# define DPIO_MODE_SELECT_1 (1 << 3)
-# define DPIO_MODE_SELECT_0 (1 << 2)
-# define DPIO_SFR_BYPASS (1 << 1)
-/* reset is active low */
-# define DPIO_CMN_RESET_N (1 << 0)
-
-/* Cedarview sideband registers */
-#define _SB_M_A 0x8008
-#define _SB_M_B 0x8028
-#define SB_M(pipe) _PIPE(pipe, _SB_M_A, _SB_M_B)
-# define SB_M_DIVIDER_MASK (0xFF << 24)
-# define SB_M_DIVIDER_SHIFT 24
-
-#define _SB_N_VCO_A 0x8014
-#define _SB_N_VCO_B 0x8034
-#define SB_N_VCO(pipe) _PIPE(pipe, _SB_N_VCO_A, _SB_N_VCO_B)
-#define SB_N_VCO_SEL_MASK PSB_MASK(31, 30)
-#define SB_N_VCO_SEL_SHIFT 30
-#define SB_N_DIVIDER_MASK PSB_MASK(29, 26)
-#define SB_N_DIVIDER_SHIFT 26
-#define SB_N_CB_TUNE_MASK PSB_MASK(25, 24)
-#define SB_N_CB_TUNE_SHIFT 24
-
-#define _SB_REF_A 0x8018
-#define _SB_REF_B 0x8038
-#define SB_REF_SFR(pipe) _PIPE(pipe, _SB_REF_A, _SB_REF_B)
-
-#define _SB_P_A 0x801c
-#define _SB_P_B 0x803c
-#define SB_P(pipe) _PIPE(pipe, _SB_P_A, _SB_P_B)
-#define SB_P2_DIVIDER_MASK PSB_MASK(31, 30)
-#define SB_P2_DIVIDER_SHIFT 30
-#define SB_P2_10 0 /* HDMI, DP, DAC */
-#define SB_P2_5 1 /* DAC */
-#define SB_P2_14 2 /* LVDS single */
-#define SB_P2_7 3 /* LVDS double */
-#define SB_P1_DIVIDER_MASK PSB_MASK(15, 12)
-#define SB_P1_DIVIDER_SHIFT 12
-
-#define PSB_LANE0 0x120
-#define PSB_LANE1 0x220
-#define PSB_LANE2 0x2320
-#define PSB_LANE3 0x2420
-
-#define LANE_PLL_MASK (0x7 << 20)
-#define LANE_PLL_ENABLE (0x3 << 20)
-
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2006-2007 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- */
-
-#include <linux/i2c.h>
-#include <linux/delay.h>
-/* #include <drm/drm_crtc.h> */
-#include <drm/drmP.h>
-#include "psb_drv.h"
-#include "psb_intel_drv.h"
-#include "psb_intel_reg.h"
-#include "psb_intel_sdvo_regs.h"
-
-struct psb_intel_sdvo_priv {
- struct psb_intel_i2c_chan *i2c_bus;
- int slaveaddr;
- int output_device;
-
- u16 active_outputs;
-
- struct psb_intel_sdvo_caps caps;
- int pixel_clock_min, pixel_clock_max;
-
- int save_sdvo_mult;
- u16 save_active_outputs;
- struct psb_intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2;
- struct psb_intel_sdvo_dtd save_output_dtd[16];
- u32 save_SDVOX;
- u8 in_out_map[4];
-
- u8 by_input_wiring;
- u32 active_device;
-};
-
-/**
- * Writes the SDVOB or SDVOC with the given value, but always writes both
- * SDVOB and SDVOC to work around apparent hardware issues (according to
- * comments in the BIOS).
- */
-void psb_intel_sdvo_write_sdvox(struct psb_intel_output *psb_intel_output,
- u32 val)
-{
- struct drm_device *dev = psb_intel_output->base.dev;
- struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
- u32 bval = val, cval = val;
- int i;
-
- if (sdvo_priv->output_device == SDVOB)
- cval = REG_READ(SDVOC);
- else
- bval = REG_READ(SDVOB);
- /*
- * Write the registers twice for luck. Sometimes,
- * writing them only once doesn't appear to 'stick'.
- * The BIOS does this too. Yay, magic
- */
- for (i = 0; i < 2; i++) {
- REG_WRITE(SDVOB, bval);
- REG_READ(SDVOB);
- REG_WRITE(SDVOC, cval);
- REG_READ(SDVOC);
- }
-}
-
-static bool psb_intel_sdvo_read_byte(
- struct psb_intel_output *psb_intel_output,
- u8 addr, u8 *ch)
-{
- struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
- u8 out_buf[2];
- u8 buf[2];
- int ret;
-
- struct i2c_msg msgs[] = {
- {
- .addr = sdvo_priv->i2c_bus->slave_addr,
- .flags = 0,
- .len = 1,
- .buf = out_buf,
- },
- {
- .addr = sdvo_priv->i2c_bus->slave_addr,
- .flags = I2C_M_RD,
- .len = 1,
- .buf = buf,
- }
- };
-
- out_buf[0] = addr;
- out_buf[1] = 0;
-
- ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2);
- if (ret == 2) {
- *ch = buf[0];
- return true;
- }
-
- return false;
-}
-
-static bool psb_intel_sdvo_write_byte(
- struct psb_intel_output *psb_intel_output,
- int addr, u8 ch)
-{
- u8 out_buf[2];
- struct i2c_msg msgs[] = {
- {
- .addr = psb_intel_output->i2c_bus->slave_addr,
- .flags = 0,
- .len = 2,
- .buf = out_buf,
- }
- };
-
- out_buf[0] = addr;
- out_buf[1] = ch;
-
- if (i2c_transfer(&psb_intel_output->i2c_bus->adapter, msgs, 1) == 1)
- return true;
- return false;
-}
-
-#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}
-/** Mapping of command numbers to names, for debug output */
-static const struct _sdvo_cmd_name {
- u8 cmd;
- char *name;
-} sdvo_cmd_names[] = {
-SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG),
- SDVO_CMD_NAME_ENTRY
- (SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2),
- SDVO_CMD_NAME_ENTRY
- (SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING),
- SDVO_CMD_NAME_ENTRY
- (SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1),
- SDVO_CMD_NAME_ENTRY
- (SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2),
- SDVO_CMD_NAME_ENTRY
- (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE),
- SDVO_CMD_NAME_ENTRY
- (SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE),
- SDVO_CMD_NAME_ENTRY
- (SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT),
- SDVO_CMD_NAME_ENTRY
- (SDVO_CMD_SET_TV_RESOLUTION_SUPPORT),
- SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH),};
-
-#define SDVO_NAME(dev_priv) \
- ((dev_priv)->output_device == SDVOB ? "SDVOB" : "SDVOC")
-#define SDVO_PRIV(output) ((struct psb_intel_sdvo_priv *) (output)->dev_priv)
-
-static void psb_intel_sdvo_write_cmd(struct psb_intel_output *psb_intel_output,
- u8 cmd,
- void *args,
- int args_len)
-{
- struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
- int i;
-
- if (0) {
- printk(KERN_DEBUG "%s: W: %02X ", SDVO_NAME(sdvo_priv), cmd);
- for (i = 0; i < args_len; i++)
- printk(KERN_CONT "%02X ", ((u8 *) args)[i]);
- for (; i < 8; i++)
- printk(KERN_CONT " ");
- for (i = 0;
- i <
- sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]);
- i++) {
- if (cmd == sdvo_cmd_names[i].cmd) {
- printk(KERN_CONT
- "(%s)", sdvo_cmd_names[i].name);
- break;
- }
- }
- if (i ==
- sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]))
- printk(KERN_CONT "(%02X)", cmd);
- printk(KERN_CONT "\n");
- }
-
- for (i = 0; i < args_len; i++) {
- psb_intel_sdvo_write_byte(psb_intel_output,
- SDVO_I2C_ARG_0 - i,
- ((u8 *) args)[i]);
- }
-
- psb_intel_sdvo_write_byte(psb_intel_output, SDVO_I2C_OPCODE, cmd);
-}
-
-static const char *const cmd_status_names[] = {
- "Power on",
- "Success",
- "Not supported",
- "Invalid arg",
- "Pending",
- "Target not specified",
- "Scaling not supported"
-};
-
-static u8 psb_intel_sdvo_read_response(
- struct psb_intel_output *psb_intel_output,
- void *response, int response_len)
-{
- struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
- int i;
- u8 status;
- u8 retry = 50;
-
- while (retry--) {
- /* Read the command response */
- for (i = 0; i < response_len; i++) {
- psb_intel_sdvo_read_byte(psb_intel_output,
- SDVO_I2C_RETURN_0 + i,
- &((u8 *) response)[i]);
- }
-
- /* read the return status */
- psb_intel_sdvo_read_byte(psb_intel_output,
- SDVO_I2C_CMD_STATUS,
- &status);
-
- if (0) {
- pr_debug("%s: R: ", SDVO_NAME(sdvo_priv));
- for (i = 0; i < response_len; i++)
- printk(KERN_CONT "%02X ", ((u8 *) response)[i]);
- for (; i < 8; i++)
- printk(" ");
- if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP)
- printk(KERN_CONT "(%s)",
- cmd_status_names[status]);
- else
- printk(KERN_CONT "(??? %d)", status);
- printk(KERN_CONT "\n");
- }
-
- if (status != SDVO_CMD_STATUS_PENDING)
- return status;
-
- mdelay(50);
- }
-
- return status;
-}
-
-int psb_intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode)
-{
- if (mode->clock >= 100000)
- return 1;
- else if (mode->clock >= 50000)
- return 2;
- else
- return 4;
-}
-
-/**
- * Don't check status code from this as it switches the bus back to the
- * SDVO chips which defeats the purpose of doing a bus switch in the first
- * place.
- */
-void psb_intel_sdvo_set_control_bus_switch(
- struct psb_intel_output *psb_intel_output,
- u8 target)
-{
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_SET_CONTROL_BUS_SWITCH,
- &target,
- 1);
-}
-
-static bool psb_intel_sdvo_set_target_input(
- struct psb_intel_output *psb_intel_output,
- bool target_0, bool target_1)
-{
- struct psb_intel_sdvo_set_target_input_args targets = { 0 };
- u8 status;
-
- if (target_0 && target_1)
- return SDVO_CMD_STATUS_NOTSUPP;
-
- if (target_1)
- targets.target_1 = 1;
-
- psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_SET_TARGET_INPUT,
- &targets, sizeof(targets));
-
- status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
-
- return status == SDVO_CMD_STATUS_SUCCESS;
-}
-
-/**
- * Return whether each input is trained.
- *
- * This function is making an assumption about the layout of the response,
- * which should be checked against the docs.
- */
-static bool psb_intel_sdvo_get_trained_inputs(struct psb_intel_output
- *psb_intel_output, bool *input_1,
- bool *input_2)
-{
- struct psb_intel_sdvo_get_trained_inputs_response response;
- u8 status;
-
- psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_GET_TRAINED_INPUTS,
- NULL, 0);
- status =
- psb_intel_sdvo_read_response(psb_intel_output, &response,
- sizeof(response));
- if (status != SDVO_CMD_STATUS_SUCCESS)
- return false;
-
- *input_1 = response.input0_trained;
- *input_2 = response.input1_trained;
- return true;
-}
-
-static bool psb_intel_sdvo_get_active_outputs(struct psb_intel_output
- *psb_intel_output, u16 *outputs)
-{
- u8 status;
-
- psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_GET_ACTIVE_OUTPUTS,
- NULL, 0);
- status =
- psb_intel_sdvo_read_response(psb_intel_output, outputs,
- sizeof(*outputs));
-
- return status == SDVO_CMD_STATUS_SUCCESS;
-}
-
-static bool psb_intel_sdvo_set_active_outputs(struct psb_intel_output
- *psb_intel_output, u16 outputs)
-{
- u8 status;
-
- psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_SET_ACTIVE_OUTPUTS,
- &outputs, sizeof(outputs));
- status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
- return status == SDVO_CMD_STATUS_SUCCESS;
-}
-
-static bool psb_intel_sdvo_set_encoder_power_state(struct psb_intel_output
- *psb_intel_output, int mode)
-{
- u8 status, state = SDVO_ENCODER_STATE_ON;
-
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- state = SDVO_ENCODER_STATE_ON;
- break;
- case DRM_MODE_DPMS_STANDBY:
- state = SDVO_ENCODER_STATE_STANDBY;
- break;
- case DRM_MODE_DPMS_SUSPEND:
- state = SDVO_ENCODER_STATE_SUSPEND;
- break;
- case DRM_MODE_DPMS_OFF:
- state = SDVO_ENCODER_STATE_OFF;
- break;
- }
-
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_SET_ENCODER_POWER_STATE, &state,
- sizeof(state));
- status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
-
- return status == SDVO_CMD_STATUS_SUCCESS;
-}
-
-static bool psb_intel_sdvo_get_input_pixel_clock_range(struct psb_intel_output
- *psb_intel_output,
- int *clock_min,
- int *clock_max)
-{
- struct psb_intel_sdvo_pixel_clock_range clocks;
- u8 status;
-
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE, NULL,
- 0);
-
- status =
- psb_intel_sdvo_read_response(psb_intel_output, &clocks,
- sizeof(clocks));
-
- if (status != SDVO_CMD_STATUS_SUCCESS)
- return false;
-
- /* Convert the values from units of 10 kHz to kHz. */
- *clock_min = clocks.min * 10;
- *clock_max = clocks.max * 10;
-
- return true;
-}
-
-static bool psb_intel_sdvo_set_target_output(
- struct psb_intel_output *psb_intel_output,
- u16 outputs)
-{
- u8 status;
-
- psb_intel_sdvo_write_cmd(psb_intel_output, SDVO_CMD_SET_TARGET_OUTPUT,
- &outputs, sizeof(outputs));
-
- status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
- return status == SDVO_CMD_STATUS_SUCCESS;
-}
-
-static bool psb_intel_sdvo_get_timing(struct psb_intel_output *psb_intel_output,
- u8 cmd, struct psb_intel_sdvo_dtd *dtd)
-{
- u8 status;
-
- psb_intel_sdvo_write_cmd(psb_intel_output, cmd, NULL, 0);
- status = psb_intel_sdvo_read_response(psb_intel_output, &dtd->part1,
- sizeof(dtd->part1));
- if (status != SDVO_CMD_STATUS_SUCCESS)
- return false;
-
- psb_intel_sdvo_write_cmd(psb_intel_output, cmd + 1, NULL, 0);
- status = psb_intel_sdvo_read_response(psb_intel_output, &dtd->part2,
- sizeof(dtd->part2));
- if (status != SDVO_CMD_STATUS_SUCCESS)
- return false;
-
- return true;
-}
-
-static bool psb_intel_sdvo_get_input_timing(
- struct psb_intel_output *psb_intel_output,
- struct psb_intel_sdvo_dtd *dtd)
-{
- return psb_intel_sdvo_get_timing(psb_intel_output,
- SDVO_CMD_GET_INPUT_TIMINGS_PART1,
- dtd);
-}
-
-static bool psb_intel_sdvo_set_timing(
- struct psb_intel_output *psb_intel_output,
- u8 cmd,
- struct psb_intel_sdvo_dtd *dtd)
-{
- u8 status;
-
- psb_intel_sdvo_write_cmd(psb_intel_output, cmd, &dtd->part1,
- sizeof(dtd->part1));
- status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
- if (status != SDVO_CMD_STATUS_SUCCESS)
- return false;
-
- psb_intel_sdvo_write_cmd(psb_intel_output, cmd + 1, &dtd->part2,
- sizeof(dtd->part2));
- status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
- if (status != SDVO_CMD_STATUS_SUCCESS)
- return false;
-
- return true;
-}
-
-static bool psb_intel_sdvo_set_input_timing(
- struct psb_intel_output *psb_intel_output,
- struct psb_intel_sdvo_dtd *dtd)
-{
- return psb_intel_sdvo_set_timing(psb_intel_output,
- SDVO_CMD_SET_INPUT_TIMINGS_PART1,
- dtd);
-}
-
-static bool psb_intel_sdvo_set_output_timing(
- struct psb_intel_output *psb_intel_output,
- struct psb_intel_sdvo_dtd *dtd)
-{
- return psb_intel_sdvo_set_timing(psb_intel_output,
- SDVO_CMD_SET_OUTPUT_TIMINGS_PART1,
- dtd);
-}
-
-static int psb_intel_sdvo_get_clock_rate_mult(struct psb_intel_output
- *psb_intel_output)
-{
- u8 response, status;
-
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_GET_CLOCK_RATE_MULT,
- NULL,
- 0);
-
- status = psb_intel_sdvo_read_response(psb_intel_output, &response, 1);
-
- if (status != SDVO_CMD_STATUS_SUCCESS) {
- DRM_DEBUG("Couldn't get SDVO clock rate multiplier\n");
- return SDVO_CLOCK_RATE_MULT_1X;
- } else {
- DRM_DEBUG("Current clock rate multiplier: %d\n", response);
- }
-
- return response;
-}
-
-static bool psb_intel_sdvo_set_clock_rate_mult(struct psb_intel_output
- *psb_intel_output, u8 val)
-{
- u8 status;
-
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_SET_CLOCK_RATE_MULT,
- &val,
- 1);
-
- status = psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
- if (status != SDVO_CMD_STATUS_SUCCESS)
- return false;
-
- return true;
-}
-
-static bool psb_sdvo_set_current_inoutmap(struct psb_intel_output *output,
- u32 in0outputmask,
- u32 in1outputmask)
-{
- u8 byArgs[4];
- u8 status;
- int i;
- struct psb_intel_sdvo_priv *sdvo_priv = output->dev_priv;
-
- /* Make all fields of the args/ret to zero */
- memset(byArgs, 0, sizeof(byArgs));
-
- /* Fill up the argument values; */
- byArgs[0] = (u8) (in0outputmask & 0xFF);
- byArgs[1] = (u8) ((in0outputmask >> 8) & 0xFF);
- byArgs[2] = (u8) (in1outputmask & 0xFF);
- byArgs[3] = (u8) ((in1outputmask >> 8) & 0xFF);
-
-
- /*save inoutmap arg here*/
- for (i = 0; i < 4; i++)
- sdvo_priv->in_out_map[i] = byArgs[0];
-
- psb_intel_sdvo_write_cmd(output, SDVO_CMD_SET_IN_OUT_MAP, byArgs, 4);
- status = psb_intel_sdvo_read_response(output, NULL, 0);
-
- if (status != SDVO_CMD_STATUS_SUCCESS)
- return false;
- return true;
-}
-
-
-static void psb_intel_sdvo_set_iomap(struct psb_intel_output *output)
-{
- u32 dwCurrentSDVOIn0 = 0;
- u32 dwCurrentSDVOIn1 = 0;
- u32 dwDevMask = 0;
-
-
- struct psb_intel_sdvo_priv *sdvo_priv = output->dev_priv;
-
- /* Please DO NOT change the following code. */
- /* SDVOB_IN0 or SDVOB_IN1 ==> sdvo_in0 */
- /* SDVOC_IN0 or SDVOC_IN1 ==> sdvo_in1 */
- if (sdvo_priv->by_input_wiring & (SDVOB_IN0 | SDVOC_IN0)) {
- switch (sdvo_priv->active_device) {
- case SDVO_DEVICE_LVDS:
- dwDevMask = SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1;
- break;
- case SDVO_DEVICE_TMDS:
- dwDevMask = SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1;
- break;
- case SDVO_DEVICE_TV:
- dwDevMask =
- SDVO_OUTPUT_YPRPB0 | SDVO_OUTPUT_SVID0 |
- SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_YPRPB1 |
- SDVO_OUTPUT_SVID1 | SDVO_OUTPUT_CVBS1 |
- SDVO_OUTPUT_SCART0 | SDVO_OUTPUT_SCART1;
- break;
- case SDVO_DEVICE_CRT:
- dwDevMask = SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1;
- break;
- }
- dwCurrentSDVOIn0 = (sdvo_priv->active_outputs & dwDevMask);
- } else if (sdvo_priv->by_input_wiring & (SDVOB_IN1 | SDVOC_IN1)) {
- switch (sdvo_priv->active_device) {
- case SDVO_DEVICE_LVDS:
- dwDevMask = SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1;
- break;
- case SDVO_DEVICE_TMDS:
- dwDevMask = SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1;
- break;
- case SDVO_DEVICE_TV:
- dwDevMask =
- SDVO_OUTPUT_YPRPB0 | SDVO_OUTPUT_SVID0 |
- SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_YPRPB1 |
- SDVO_OUTPUT_SVID1 | SDVO_OUTPUT_CVBS1 |
- SDVO_OUTPUT_SCART0 | SDVO_OUTPUT_SCART1;
- break;
- case SDVO_DEVICE_CRT:
- dwDevMask = SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1;
- break;
- }
- dwCurrentSDVOIn1 = (sdvo_priv->active_outputs & dwDevMask);
- }
-
- psb_sdvo_set_current_inoutmap(output, dwCurrentSDVOIn0,
- dwCurrentSDVOIn1);
-}
-
-
-static bool psb_intel_sdvo_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- /* Make the CRTC code factor in the SDVO pixel multiplier. The SDVO
- * device will be told of the multiplier during mode_set.
- */
- adjusted_mode->clock *= psb_intel_sdvo_get_pixel_multiplier(mode);
- return true;
-}
-
-static void psb_intel_sdvo_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct drm_crtc *crtc = encoder->crtc;
- struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
- struct psb_intel_output *psb_intel_output =
- enc_to_psb_intel_output(encoder);
- struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
- u16 width, height;
- u16 h_blank_len, h_sync_len, v_blank_len, v_sync_len;
- u16 h_sync_offset, v_sync_offset;
- u32 sdvox;
- struct psb_intel_sdvo_dtd output_dtd;
- int sdvo_pixel_multiply;
-
- if (!mode)
- return;
-
- psb_intel_sdvo_set_target_output(psb_intel_output, 0);
-
- width = mode->crtc_hdisplay;
- height = mode->crtc_vdisplay;
-
- /* do some mode translations */
- h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start;
- h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
-
- v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start;
- v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
-
- h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start;
- v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start;
-
- output_dtd.part1.clock = mode->clock / 10;
- output_dtd.part1.h_active = width & 0xff;
- output_dtd.part1.h_blank = h_blank_len & 0xff;
- output_dtd.part1.h_high = (((width >> 8) & 0xf) << 4) |
- ((h_blank_len >> 8) & 0xf);
- output_dtd.part1.v_active = height & 0xff;
- output_dtd.part1.v_blank = v_blank_len & 0xff;
- output_dtd.part1.v_high = (((height >> 8) & 0xf) << 4) |
- ((v_blank_len >> 8) & 0xf);
-
- output_dtd.part2.h_sync_off = h_sync_offset;
- output_dtd.part2.h_sync_width = h_sync_len & 0xff;
- output_dtd.part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 |
- (v_sync_len & 0xf);
- output_dtd.part2.sync_off_width_high =
- ((h_sync_offset & 0x300) >> 2) | ((h_sync_len & 0x300) >> 4) |
- ((v_sync_offset & 0x30) >> 2) | ((v_sync_len & 0x30) >> 4);
-
- output_dtd.part2.dtd_flags = 0x18;
- if (mode->flags & DRM_MODE_FLAG_PHSYNC)
- output_dtd.part2.dtd_flags |= 0x2;
- if (mode->flags & DRM_MODE_FLAG_PVSYNC)
- output_dtd.part2.dtd_flags |= 0x4;
-
- output_dtd.part2.sdvo_flags = 0;
- output_dtd.part2.v_sync_off_high = v_sync_offset & 0xc0;
- output_dtd.part2.reserved = 0;
-
- /* Set the output timing to the screen */
- psb_intel_sdvo_set_target_output(psb_intel_output,
- sdvo_priv->active_outputs);
-
- /* Set the input timing to the screen. Assume always input 0. */
- psb_intel_sdvo_set_target_input(psb_intel_output, true, false);
-
- psb_intel_sdvo_set_output_timing(psb_intel_output, &output_dtd);
-
- /* We would like to use i830_sdvo_create_preferred_input_timing() to
- * provide the device with a timing it can support, if it supports that
- * feature. However, presumably we would need to adjust the CRTC to
- * output the preferred timing, and we don't support that currently.
- */
- psb_intel_sdvo_set_input_timing(psb_intel_output, &output_dtd);
-
- switch (psb_intel_sdvo_get_pixel_multiplier(mode)) {
- case 1:
- psb_intel_sdvo_set_clock_rate_mult(psb_intel_output,
- SDVO_CLOCK_RATE_MULT_1X);
- break;
- case 2:
- psb_intel_sdvo_set_clock_rate_mult(psb_intel_output,
- SDVO_CLOCK_RATE_MULT_2X);
- break;
- case 4:
- psb_intel_sdvo_set_clock_rate_mult(psb_intel_output,
- SDVO_CLOCK_RATE_MULT_4X);
- break;
- }
-
- /* Set the SDVO control regs. */
- sdvox = REG_READ(sdvo_priv->output_device);
- switch (sdvo_priv->output_device) {
- case SDVOB:
- sdvox &= SDVOB_PRESERVE_MASK;
- break;
- case SDVOC:
- sdvox &= SDVOC_PRESERVE_MASK;
- break;
- }
- sdvox |= (9 << 19) | SDVO_BORDER_ENABLE;
- if (psb_intel_crtc->pipe == 1)
- sdvox |= SDVO_PIPE_B_SELECT;
-
- sdvo_pixel_multiply = psb_intel_sdvo_get_pixel_multiplier(mode);
-
- psb_intel_sdvo_write_sdvox(psb_intel_output, sdvox);
-
- psb_intel_sdvo_set_iomap(psb_intel_output);
-}
-
-static void psb_intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
-{
- struct drm_device *dev = encoder->dev;
- struct psb_intel_output *psb_intel_output =
- enc_to_psb_intel_output(encoder);
- struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
- u32 temp;
-
- if (mode != DRM_MODE_DPMS_ON) {
- psb_intel_sdvo_set_active_outputs(psb_intel_output, 0);
- if (0)
- psb_intel_sdvo_set_encoder_power_state(
- psb_intel_output,
- mode);
-
- if (mode == DRM_MODE_DPMS_OFF) {
- temp = REG_READ(sdvo_priv->output_device);
- if ((temp & SDVO_ENABLE) != 0) {
- psb_intel_sdvo_write_sdvox(psb_intel_output,
- temp &
- ~SDVO_ENABLE);
- }
- }
- } else {
- bool input1, input2;
- int i;
- u8 status;
-
- temp = REG_READ(sdvo_priv->output_device);
- if ((temp & SDVO_ENABLE) == 0)
- psb_intel_sdvo_write_sdvox(psb_intel_output,
- temp | SDVO_ENABLE);
- for (i = 0; i < 2; i++)
- psb_intel_wait_for_vblank(dev);
-
- status =
- psb_intel_sdvo_get_trained_inputs(psb_intel_output,
- &input1,
- &input2);
-
-
- /* Warn if the device reported failure to sync.
- * A lot of SDVO devices fail to notify of sync, but it's
- * a given it the status is a success, we succeeded.
- */
- if (status == SDVO_CMD_STATUS_SUCCESS && !input1) {
- DRM_DEBUG
- ("First %s output reported failure to sync\n",
- SDVO_NAME(sdvo_priv));
- }
-
- if (0)
- psb_intel_sdvo_set_encoder_power_state(
- psb_intel_output,
- mode);
- psb_intel_sdvo_set_active_outputs(psb_intel_output,
- sdvo_priv->active_outputs);
- }
- return;
-}
-
-static void psb_intel_sdvo_save(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
- /*int o;*/
-
- sdvo_priv->save_sdvo_mult =
- psb_intel_sdvo_get_clock_rate_mult(psb_intel_output);
- psb_intel_sdvo_get_active_outputs(psb_intel_output,
- &sdvo_priv->save_active_outputs);
-
- if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) {
- psb_intel_sdvo_set_target_input(psb_intel_output,
- true,
- false);
- psb_intel_sdvo_get_input_timing(psb_intel_output,
- &sdvo_priv->save_input_dtd_1);
- }
-
- if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) {
- psb_intel_sdvo_set_target_input(psb_intel_output,
- false,
- true);
- psb_intel_sdvo_get_input_timing(psb_intel_output,
- &sdvo_priv->save_input_dtd_2);
- }
- sdvo_priv->save_SDVOX = REG_READ(sdvo_priv->output_device);
-
- /*TODO: save the in_out_map state*/
-}
-
-static void psb_intel_sdvo_restore(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
- /*int o;*/
- int i;
- bool input1, input2;
- u8 status;
-
- psb_intel_sdvo_set_active_outputs(psb_intel_output, 0);
-
- if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) {
- psb_intel_sdvo_set_target_input(psb_intel_output, true, false);
- psb_intel_sdvo_set_input_timing(psb_intel_output,
- &sdvo_priv->save_input_dtd_1);
- }
-
- if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) {
- psb_intel_sdvo_set_target_input(psb_intel_output, false, true);
- psb_intel_sdvo_set_input_timing(psb_intel_output,
- &sdvo_priv->save_input_dtd_2);
- }
-
- psb_intel_sdvo_set_clock_rate_mult(psb_intel_output,
- sdvo_priv->save_sdvo_mult);
-
- REG_WRITE(sdvo_priv->output_device, sdvo_priv->save_SDVOX);
-
- if (sdvo_priv->save_SDVOX & SDVO_ENABLE) {
- for (i = 0; i < 2; i++)
- psb_intel_wait_for_vblank(dev);
- status =
- psb_intel_sdvo_get_trained_inputs(psb_intel_output,
- &input1,
- &input2);
- if (status == SDVO_CMD_STATUS_SUCCESS && !input1)
- DRM_DEBUG
- ("First %s output reported failure to sync\n",
- SDVO_NAME(sdvo_priv));
- }
-
- psb_intel_sdvo_set_active_outputs(psb_intel_output,
- sdvo_priv->save_active_outputs);
-
- /*TODO: restore in_out_map*/
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_SET_IN_OUT_MAP,
- sdvo_priv->in_out_map,
- 4);
-
- psb_intel_sdvo_read_response(psb_intel_output, NULL, 0);
-}
-
-static int psb_intel_sdvo_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
- struct psb_intel_sdvo_priv *sdvo_priv = psb_intel_output->dev_priv;
-
- if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
- return MODE_NO_DBLESCAN;
-
- if (sdvo_priv->pixel_clock_min > mode->clock)
- return MODE_CLOCK_LOW;
-
- if (sdvo_priv->pixel_clock_max < mode->clock)
- return MODE_CLOCK_HIGH;
-
- return MODE_OK;
-}
-
-static bool psb_intel_sdvo_get_capabilities(
- struct psb_intel_output *psb_intel_output,
- struct psb_intel_sdvo_caps *caps)
-{
- u8 status;
-
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_GET_DEVICE_CAPS,
- NULL,
- 0);
- status = psb_intel_sdvo_read_response(psb_intel_output,
- caps,
- sizeof(*caps));
- if (status != SDVO_CMD_STATUS_SUCCESS)
- return false;
-
- return true;
-}
-
-struct drm_connector *psb_intel_sdvo_find(struct drm_device *dev, int sdvoB)
-{
- struct drm_connector *connector = NULL;
- struct psb_intel_output *iout = NULL;
- struct psb_intel_sdvo_priv *sdvo;
-
- /* find the sdvo connector */
- list_for_each_entry(connector, &dev->mode_config.connector_list,
- head) {
- iout = to_psb_intel_output(connector);
-
- if (iout->type != INTEL_OUTPUT_SDVO)
- continue;
-
- sdvo = iout->dev_priv;
-
- if (sdvo->output_device == SDVOB && sdvoB)
- return connector;
-
- if (sdvo->output_device == SDVOC && !sdvoB)
- return connector;
-
- }
-
- return NULL;
-}
-
-int psb_intel_sdvo_supports_hotplug(struct drm_connector *connector)
-{
- u8 response[2];
- u8 status;
- struct psb_intel_output *psb_intel_output;
-
- if (!connector)
- return 0;
-
- psb_intel_output = to_psb_intel_output(connector);
-
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_GET_HOT_PLUG_SUPPORT,
- NULL,
- 0);
- status = psb_intel_sdvo_read_response(psb_intel_output,
- &response,
- 2);
-
- if (response[0] != 0)
- return 1;
-
- return 0;
-}
-
-void psb_intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
-{
- u8 response[2];
- u8 status;
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
-
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_GET_ACTIVE_HOT_PLUG,
- NULL,
- 0);
- psb_intel_sdvo_read_response(psb_intel_output, &response, 2);
-
- if (on) {
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL,
- 0);
- status = psb_intel_sdvo_read_response(psb_intel_output,
- &response,
- 2);
-
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_SET_ACTIVE_HOT_PLUG,
- &response, 2);
- } else {
- response[0] = 0;
- response[1] = 0;
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_SET_ACTIVE_HOT_PLUG,
- &response, 2);
- }
-
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_GET_ACTIVE_HOT_PLUG,
- NULL,
- 0);
- psb_intel_sdvo_read_response(psb_intel_output, &response, 2);
-}
-
-static enum drm_connector_status psb_intel_sdvo_detect(struct drm_connector
- *connector, bool force)
-{
- u8 response[2];
- u8 status;
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
-
- psb_intel_sdvo_write_cmd(psb_intel_output,
- SDVO_CMD_GET_ATTACHED_DISPLAYS,
- NULL,
- 0);
- status = psb_intel_sdvo_read_response(psb_intel_output, &response, 2);
-
- DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]);
- if ((response[0] != 0) || (response[1] != 0))
- return connector_status_connected;
- else
- return connector_status_disconnected;
-}
-
-static int psb_intel_sdvo_get_modes(struct drm_connector *connector)
-{
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
-
- /* set the bus switch and get the modes */
- psb_intel_sdvo_set_control_bus_switch(psb_intel_output,
- SDVO_CONTROL_BUS_DDC2);
- psb_intel_ddc_get_modes(psb_intel_output);
-
- if (list_empty(&connector->probed_modes))
- return 0;
- return 1;
-}
-
-static void psb_intel_sdvo_destroy(struct drm_connector *connector)
-{
- struct psb_intel_output *psb_intel_output =
- to_psb_intel_output(connector);
-
- if (psb_intel_output->i2c_bus)
- psb_intel_i2c_destroy(psb_intel_output->i2c_bus);
- drm_sysfs_connector_remove(connector);
- drm_connector_cleanup(connector);
- kfree(psb_intel_output);
-}
-
-static const struct drm_encoder_helper_funcs psb_intel_sdvo_helper_funcs = {
- .dpms = psb_intel_sdvo_dpms,
- .mode_fixup = psb_intel_sdvo_mode_fixup,
- .prepare = psb_intel_encoder_prepare,
- .mode_set = psb_intel_sdvo_mode_set,
- .commit = psb_intel_encoder_commit,
-};
-
-static const struct drm_connector_funcs psb_intel_sdvo_connector_funcs = {
- .dpms = drm_helper_connector_dpms,
- .save = psb_intel_sdvo_save,
- .restore = psb_intel_sdvo_restore,
- .detect = psb_intel_sdvo_detect,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .destroy = psb_intel_sdvo_destroy,
-};
-
-static const struct drm_connector_helper_funcs
- psb_intel_sdvo_connector_helper_funcs = {
- .get_modes = psb_intel_sdvo_get_modes,
- .mode_valid = psb_intel_sdvo_mode_valid,
- .best_encoder = psb_intel_best_encoder,
-};
-
-void psb_intel_sdvo_enc_destroy(struct drm_encoder *encoder)
-{
- drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs psb_intel_sdvo_enc_funcs = {
- .destroy = psb_intel_sdvo_enc_destroy,
-};
-
-
-void psb_intel_sdvo_init(struct drm_device *dev, int output_device)
-{
- struct drm_connector *connector;
- struct psb_intel_output *psb_intel_output;
- struct psb_intel_sdvo_priv *sdvo_priv;
- struct psb_intel_i2c_chan *i2cbus = NULL;
- int connector_type;
- u8 ch[0x40];
- int i;
- int encoder_type, output_id;
-
- psb_intel_output =
- kcalloc(sizeof(struct psb_intel_output) +
- sizeof(struct psb_intel_sdvo_priv), 1, GFP_KERNEL);
- if (!psb_intel_output)
- return;
-
- connector = &psb_intel_output->base;
-
- drm_connector_init(dev, connector, &psb_intel_sdvo_connector_funcs,
- DRM_MODE_CONNECTOR_Unknown);
- drm_connector_helper_add(connector,
- &psb_intel_sdvo_connector_helper_funcs);
- sdvo_priv = (struct psb_intel_sdvo_priv *) (psb_intel_output + 1);
- psb_intel_output->type = INTEL_OUTPUT_SDVO;
-
- connector->interlace_allowed = 0;
- connector->doublescan_allowed = 0;
-
- /* setup the DDC bus. */
- if (output_device == SDVOB)
- i2cbus =
- psb_intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
- else
- i2cbus =
- psb_intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
-
- if (!i2cbus)
- goto err_connector;
-
- sdvo_priv->i2c_bus = i2cbus;
-
- if (output_device == SDVOB) {
- output_id = 1;
- sdvo_priv->by_input_wiring = SDVOB_IN0;
- sdvo_priv->i2c_bus->slave_addr = 0x38;
- } else {
- output_id = 2;
- sdvo_priv->i2c_bus->slave_addr = 0x39;
- }
-
- sdvo_priv->output_device = output_device;
- psb_intel_output->i2c_bus = i2cbus;
- psb_intel_output->dev_priv = sdvo_priv;
-
-
- /* Read the regs to test if we can talk to the device */
- for (i = 0; i < 0x40; i++) {
- if (!psb_intel_sdvo_read_byte(psb_intel_output, i, &ch[i])) {
- dev_dbg(dev->dev, "No SDVO device found on SDVO%c\n",
- output_device == SDVOB ? 'B' : 'C');
- goto err_i2c;
- }
- }
-
- psb_intel_sdvo_get_capabilities(psb_intel_output, &sdvo_priv->caps);
-
- memset(&sdvo_priv->active_outputs, 0,
- sizeof(sdvo_priv->active_outputs));
-
- /* TODO, CVBS, SVID, YPRPB & SCART outputs. */
- if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) {
- sdvo_priv->active_outputs = SDVO_OUTPUT_RGB0;
- sdvo_priv->active_device = SDVO_DEVICE_CRT;
- connector->display_info.subpixel_order =
- SubPixelHorizontalRGB;
- encoder_type = DRM_MODE_ENCODER_DAC;
- connector_type = DRM_MODE_CONNECTOR_VGA;
- } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1) {
- sdvo_priv->active_outputs = SDVO_OUTPUT_RGB1;
- sdvo_priv->active_outputs = SDVO_DEVICE_CRT;
- connector->display_info.subpixel_order =
- SubPixelHorizontalRGB;
- encoder_type = DRM_MODE_ENCODER_DAC;
- connector_type = DRM_MODE_CONNECTOR_VGA;
- } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0) {
- sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS0;
- sdvo_priv->active_device = SDVO_DEVICE_TMDS;
- connector->display_info.subpixel_order =
- SubPixelHorizontalRGB;
- encoder_type = DRM_MODE_ENCODER_TMDS;
- connector_type = DRM_MODE_CONNECTOR_DVID;
- } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS1) {
- sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS1;
- sdvo_priv->active_device = SDVO_DEVICE_TMDS;
- connector->display_info.subpixel_order =
- SubPixelHorizontalRGB;
- encoder_type = DRM_MODE_ENCODER_TMDS;
- connector_type = DRM_MODE_CONNECTOR_DVID;
- } else {
- unsigned char bytes[2];
-
- memcpy(bytes, &sdvo_priv->caps.output_flags, 2);
- dev_dbg(dev->dev, "%s: No active RGB or TMDS outputs (0x%02x%02x)\n",
- SDVO_NAME(sdvo_priv), bytes[0], bytes[1]);
- goto err_i2c;
- }
-
- drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_sdvo_enc_funcs,
- encoder_type);
- drm_encoder_helper_add(&psb_intel_output->enc,
- &psb_intel_sdvo_helper_funcs);
- connector->connector_type = connector_type;
-
- drm_mode_connector_attach_encoder(&psb_intel_output->base,
- &psb_intel_output->enc);
- drm_sysfs_connector_add(connector);
-
- /* Set the input timing to the screen. Assume always input 0. */
- psb_intel_sdvo_set_target_input(psb_intel_output, true, false);
-
- psb_intel_sdvo_get_input_pixel_clock_range(psb_intel_output,
- &sdvo_priv->pixel_clock_min,
- &sdvo_priv->
- pixel_clock_max);
-
-
- dev_dbg(dev->dev, "%s device VID/DID: %02X:%02X.%02X, "
- "clock range %dMHz - %dMHz, "
- "input 1: %c, input 2: %c, "
- "output 1: %c, output 2: %c\n",
- SDVO_NAME(sdvo_priv),
- sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id,
- sdvo_priv->caps.device_rev_id,
- sdvo_priv->pixel_clock_min / 1000,
- sdvo_priv->pixel_clock_max / 1000,
- (sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N',
- (sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N',
- /* check currently supported outputs */
- sdvo_priv->caps.output_flags &
- (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N',
- sdvo_priv->caps.output_flags &
- (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
-
- psb_intel_output->ddc_bus = i2cbus;
-
- return;
-
-err_i2c:
- psb_intel_i2c_destroy(psb_intel_output->i2c_bus);
-err_connector:
- drm_connector_cleanup(connector);
- kfree(psb_intel_output);
-
- return;
-}
+++ /dev/null
-/*
- * SDVO command definitions and structures.
- *
- * Copyright (c) 2008, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- */
-
-#define SDVO_OUTPUT_FIRST (0)
-#define SDVO_OUTPUT_TMDS0 (1 << 0)
-#define SDVO_OUTPUT_RGB0 (1 << 1)
-#define SDVO_OUTPUT_CVBS0 (1 << 2)
-#define SDVO_OUTPUT_SVID0 (1 << 3)
-#define SDVO_OUTPUT_YPRPB0 (1 << 4)
-#define SDVO_OUTPUT_SCART0 (1 << 5)
-#define SDVO_OUTPUT_LVDS0 (1 << 6)
-#define SDVO_OUTPUT_TMDS1 (1 << 8)
-#define SDVO_OUTPUT_RGB1 (1 << 9)
-#define SDVO_OUTPUT_CVBS1 (1 << 10)
-#define SDVO_OUTPUT_SVID1 (1 << 11)
-#define SDVO_OUTPUT_YPRPB1 (1 << 12)
-#define SDVO_OUTPUT_SCART1 (1 << 13)
-#define SDVO_OUTPUT_LVDS1 (1 << 14)
-#define SDVO_OUTPUT_LAST (14)
-
-struct psb_intel_sdvo_caps {
- u8 vendor_id;
- u8 device_id;
- u8 device_rev_id;
- u8 sdvo_version_major;
- u8 sdvo_version_minor;
- unsigned int sdvo_inputs_mask:2;
- unsigned int smooth_scaling:1;
- unsigned int sharp_scaling:1;
- unsigned int up_scaling:1;
- unsigned int down_scaling:1;
- unsigned int stall_support:1;
- unsigned int pad:1;
- u16 output_flags;
-} __packed;
-
-/** This matches the EDID DTD structure, more or less */
-struct psb_intel_sdvo_dtd {
- struct {
- u16 clock; /**< pixel clock, in 10kHz units */
- u8 h_active; /**< lower 8 bits (pixels) */
- u8 h_blank; /**< lower 8 bits (pixels) */
- u8 h_high; /**< upper 4 bits each h_active, h_blank */
- u8 v_active; /**< lower 8 bits (lines) */
- u8 v_blank; /**< lower 8 bits (lines) */
- u8 v_high; /**< upper 4 bits each v_active, v_blank */
- } part1;
-
- struct {
- u8 h_sync_off;
- /**< lower 8 bits, from hblank start */
- u8 h_sync_width;/**< lower 8 bits (pixels) */
- /** lower 4 bits each vsync offset, vsync width */
- u8 v_sync_off_width;
- /**
- * 2 high bits of hsync offset, 2 high bits of hsync width,
- * bits 4-5 of vsync offset, and 2 high bits of vsync width.
- */
- u8 sync_off_width_high;
- u8 dtd_flags;
- u8 sdvo_flags;
- /** bits 6-7 of vsync offset at bits 6-7 */
- u8 v_sync_off_high;
- u8 reserved;
- } part2;
-} __packed;
-
-struct psb_intel_sdvo_pixel_clock_range {
- u16 min; /**< pixel clock, in 10kHz units */
- u16 max; /**< pixel clock, in 10kHz units */
-} __packed;
-
-struct psb_intel_sdvo_preferred_input_timing_args {
- u16 clock;
- u16 width;
- u16 height;
-} __packed;
-
-/* I2C registers for SDVO */
-#define SDVO_I2C_ARG_0 0x07
-#define SDVO_I2C_ARG_1 0x06
-#define SDVO_I2C_ARG_2 0x05
-#define SDVO_I2C_ARG_3 0x04
-#define SDVO_I2C_ARG_4 0x03
-#define SDVO_I2C_ARG_5 0x02
-#define SDVO_I2C_ARG_6 0x01
-#define SDVO_I2C_ARG_7 0x00
-#define SDVO_I2C_OPCODE 0x08
-#define SDVO_I2C_CMD_STATUS 0x09
-#define SDVO_I2C_RETURN_0 0x0a
-#define SDVO_I2C_RETURN_1 0x0b
-#define SDVO_I2C_RETURN_2 0x0c
-#define SDVO_I2C_RETURN_3 0x0d
-#define SDVO_I2C_RETURN_4 0x0e
-#define SDVO_I2C_RETURN_5 0x0f
-#define SDVO_I2C_RETURN_6 0x10
-#define SDVO_I2C_RETURN_7 0x11
-#define SDVO_I2C_VENDOR_BEGIN 0x20
-
-/* Status results */
-#define SDVO_CMD_STATUS_POWER_ON 0x0
-#define SDVO_CMD_STATUS_SUCCESS 0x1
-#define SDVO_CMD_STATUS_NOTSUPP 0x2
-#define SDVO_CMD_STATUS_INVALID_ARG 0x3
-#define SDVO_CMD_STATUS_PENDING 0x4
-#define SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED 0x5
-#define SDVO_CMD_STATUS_SCALING_NOT_SUPP 0x6
-
-/* SDVO commands, argument/result registers */
-
-#define SDVO_CMD_RESET 0x01
-
-/** Returns a struct psb_intel_sdvo_caps */
-#define SDVO_CMD_GET_DEVICE_CAPS 0x02
-
-#define SDVO_CMD_GET_FIRMWARE_REV 0x86
-# define SDVO_DEVICE_FIRMWARE_MINOR SDVO_I2C_RETURN_0
-# define SDVO_DEVICE_FIRMWARE_MAJOR SDVO_I2C_RETURN_1
-# define SDVO_DEVICE_FIRMWARE_PATCH SDVO_I2C_RETURN_2
-
-/**
- * Reports which inputs are trained (managed to sync).
- *
- * Devices must have trained within 2 vsyncs of a mode change.
- */
-#define SDVO_CMD_GET_TRAINED_INPUTS 0x03
-struct psb_intel_sdvo_get_trained_inputs_response {
- unsigned int input0_trained:1;
- unsigned int input1_trained:1;
- unsigned int pad:6;
-} __packed;
-
-/** Returns a struct psb_intel_sdvo_output_flags of active outputs. */
-#define SDVO_CMD_GET_ACTIVE_OUTPUTS 0x04
-
-/**
- * Sets the current set of active outputs.
- *
- * Takes a struct psb_intel_sdvo_output_flags.
- * Must be preceded by a SET_IN_OUT_MAP
- * on multi-output devices.
- */
-#define SDVO_CMD_SET_ACTIVE_OUTPUTS 0x05
-
-/**
- * Returns the current mapping of SDVO inputs to outputs on the device.
- *
- * Returns two struct psb_intel_sdvo_output_flags structures.
- */
-#define SDVO_CMD_GET_IN_OUT_MAP 0x06
-
-/**
- * Sets the current mapping of SDVO inputs to outputs on the device.
- *
- * Takes two struct i380_sdvo_output_flags structures.
- */
-#define SDVO_CMD_SET_IN_OUT_MAP 0x07
-
-/**
- * Returns a struct psb_intel_sdvo_output_flags of attached displays.
- */
-#define SDVO_CMD_GET_ATTACHED_DISPLAYS 0x0b
-
-/**
- * Returns a struct psb_intel_sdvo_ouptut_flags of displays supporting hot plugging.
- */
-#define SDVO_CMD_GET_HOT_PLUG_SUPPORT 0x0c
-
-/**
- * Takes a struct psb_intel_sdvo_output_flags.
- */
-#define SDVO_CMD_SET_ACTIVE_HOT_PLUG 0x0d
-
-/**
- * Returns a struct psb_intel_sdvo_output_flags of displays with hot plug
- * interrupts enabled.
- */
-#define SDVO_CMD_GET_ACTIVE_HOT_PLUG 0x0e
-
-#define SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE 0x0f
-struct psb_intel_sdvo_get_interrupt_event_source_response {
- u16 interrupt_status;
- unsigned int ambient_light_interrupt:1;
- unsigned int pad:7;
-} __packed;
-
-/**
- * Selects which input is affected by future input commands.
- *
- * Commands affected include SET_INPUT_TIMINGS_PART[12],
- * GET_INPUT_TIMINGS_PART[12], GET_PREFERRED_INPUT_TIMINGS_PART[12],
- * GET_INPUT_PIXEL_CLOCK_RANGE, and CREATE_PREFERRED_INPUT_TIMINGS.
- */
-#define SDVO_CMD_SET_TARGET_INPUT 0x10
-struct psb_intel_sdvo_set_target_input_args {
- unsigned int target_1:1;
- unsigned int pad:7;
-} __packed;
-
-/**
- * Takes a struct psb_intel_sdvo_output_flags of which outputs are targeted by
- * future output commands.
- *
- * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12],
- * GET_OUTPUT_TIMINGS_PART[12], and GET_OUTPUT_PIXEL_CLOCK_RANGE.
- */
-#define SDVO_CMD_SET_TARGET_OUTPUT 0x11
-
-#define SDVO_CMD_GET_INPUT_TIMINGS_PART1 0x12
-#define SDVO_CMD_GET_INPUT_TIMINGS_PART2 0x13
-#define SDVO_CMD_SET_INPUT_TIMINGS_PART1 0x14
-#define SDVO_CMD_SET_INPUT_TIMINGS_PART2 0x15
-#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART1 0x16
-#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART2 0x17
-#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART1 0x18
-#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART2 0x19
-/* Part 1 */
-# define SDVO_DTD_CLOCK_LOW SDVO_I2C_ARG_0
-# define SDVO_DTD_CLOCK_HIGH SDVO_I2C_ARG_1
-# define SDVO_DTD_H_ACTIVE SDVO_I2C_ARG_2
-# define SDVO_DTD_H_BLANK SDVO_I2C_ARG_3
-# define SDVO_DTD_H_HIGH SDVO_I2C_ARG_4
-# define SDVO_DTD_V_ACTIVE SDVO_I2C_ARG_5
-# define SDVO_DTD_V_BLANK SDVO_I2C_ARG_6
-# define SDVO_DTD_V_HIGH SDVO_I2C_ARG_7
-/* Part 2 */
-# define SDVO_DTD_HSYNC_OFF SDVO_I2C_ARG_0
-# define SDVO_DTD_HSYNC_WIDTH SDVO_I2C_ARG_1
-# define SDVO_DTD_VSYNC_OFF_WIDTH SDVO_I2C_ARG_2
-# define SDVO_DTD_SYNC_OFF_WIDTH_HIGH SDVO_I2C_ARG_3
-# define SDVO_DTD_DTD_FLAGS SDVO_I2C_ARG_4
-# define SDVO_DTD_DTD_FLAG_INTERLACED (1 << 7)
-# define SDVO_DTD_DTD_FLAG_STEREO_MASK (3 << 5)
-# define SDVO_DTD_DTD_FLAG_INPUT_MASK (3 << 3)
-# define SDVO_DTD_DTD_FLAG_SYNC_MASK (3 << 1)
-# define SDVO_DTD_SDVO_FLAS SDVO_I2C_ARG_5
-# define SDVO_DTD_SDVO_FLAG_STALL (1 << 7)
-# define SDVO_DTD_SDVO_FLAG_CENTERED (0 << 6)
-# define SDVO_DTD_SDVO_FLAG_UPPER_LEFT (1 << 6)
-# define SDVO_DTD_SDVO_FLAG_SCALING_MASK (3 << 4)
-# define SDVO_DTD_SDVO_FLAG_SCALING_NONE (0 << 4)
-# define SDVO_DTD_SDVO_FLAG_SCALING_SHARP (1 << 4)
-# define SDVO_DTD_SDVO_FLAG_SCALING_SMOOTH (2 << 4)
-# define SDVO_DTD_VSYNC_OFF_HIGH SDVO_I2C_ARG_6
-
-/**
- * Generates a DTD based on the given width, height, and flags.
- *
- * This will be supported by any device supporting scaling or interlaced
- * modes.
- */
-#define SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING 0x1a
-# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_LOW SDVO_I2C_ARG_0
-# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_HIGH SDVO_I2C_ARG_1
-# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_LOW SDVO_I2C_ARG_2
-# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_HIGH SDVO_I2C_ARG_3
-# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_LOW SDVO_I2C_ARG_4
-# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_HIGH SDVO_I2C_ARG_5
-# define SDVO_PREFERRED_INPUT_TIMING_FLAGS SDVO_I2C_ARG_6
-# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_INTERLACED (1 << 0)
-# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_SCALED (1 << 1)
-
-#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1 0x1b
-#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2 0x1c
-
-/** Returns a struct psb_intel_sdvo_pixel_clock_range */
-#define SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE 0x1d
-/** Returns a struct psb_intel_sdvo_pixel_clock_range */
-#define SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE 0x1e
-
-/** Returns a byte bitfield containing SDVO_CLOCK_RATE_MULT_* flags */
-#define SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS 0x1f
-
-/** Returns a byte containing a SDVO_CLOCK_RATE_MULT_* flag */
-#define SDVO_CMD_GET_CLOCK_RATE_MULT 0x20
-/** Takes a byte containing a SDVO_CLOCK_RATE_MULT_* flag */
-#define SDVO_CMD_SET_CLOCK_RATE_MULT 0x21
-# define SDVO_CLOCK_RATE_MULT_1X (1 << 0)
-# define SDVO_CLOCK_RATE_MULT_2X (1 << 1)
-# define SDVO_CLOCK_RATE_MULT_4X (1 << 3)
-
-#define SDVO_CMD_GET_SUPPORTED_TV_FORMATS 0x27
-
-#define SDVO_CMD_GET_TV_FORMAT 0x28
-
-#define SDVO_CMD_SET_TV_FORMAT 0x29
-
-#define SDVO_CMD_GET_SUPPORTED_POWER_STATES 0x2a
-#define SDVO_CMD_GET_ENCODER_POWER_STATE 0x2b
-#define SDVO_CMD_SET_ENCODER_POWER_STATE 0x2c
-# define SDVO_ENCODER_STATE_ON (1 << 0)
-# define SDVO_ENCODER_STATE_STANDBY (1 << 1)
-# define SDVO_ENCODER_STATE_SUSPEND (1 << 2)
-# define SDVO_ENCODER_STATE_OFF (1 << 3)
-
-#define SDVO_CMD_SET_TV_RESOLUTION_SUPPORT 0x93
-
-#define SDVO_CMD_SET_CONTROL_BUS_SWITCH 0x7a
-# define SDVO_CONTROL_BUS_PROM 0x0
-# define SDVO_CONTROL_BUS_DDC1 0x1
-# define SDVO_CONTROL_BUS_DDC2 0x2
-# define SDVO_CONTROL_BUS_DDC3 0x3
-
-/* SDVO Bus & SDVO Inputs wiring details*/
-/* Bit 0: Is SDVOB connected to In0 (1 = yes, 0 = no*/
-/* Bit 1: Is SDVOB connected to In1 (1 = yes, 0 = no*/
-/* Bit 2: Is SDVOC connected to In0 (1 = yes, 0 = no*/
-/* Bit 3: Is SDVOC connected to In1 (1 = yes, 0 = no*/
-#define SDVOB_IN0 0x01
-#define SDVOB_IN1 0x02
-#define SDVOC_IN0 0x04
-#define SDVOC_IN1 0x08
-
-#define SDVO_DEVICE_NONE 0x00
-#define SDVO_DEVICE_CRT 0x01
-#define SDVO_DEVICE_TV 0x02
-#define SDVO_DEVICE_LVDS 0x04
-#define SDVO_DEVICE_TMDS 0x08
-
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2007, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
- * develop this driver.
- *
- **************************************************************************/
-/*
- */
-
-#include <drm/drmP.h>
-#include "psb_drv.h"
-#include "psb_reg.h"
-#include "psb_intel_reg.h"
-#include "power.h"
-#include "mdfld_output.h"
-
-/*
- * inline functions
- */
-
-static inline u32
-psb_pipestat(int pipe)
-{
- if (pipe == 0)
- return PIPEASTAT;
- if (pipe == 1)
- return PIPEBSTAT;
- if (pipe == 2)
- return PIPECSTAT;
- BUG();
-}
-
-static inline u32
-mid_pipe_event(int pipe)
-{
- if (pipe == 0)
- return _PSB_PIPEA_EVENT_FLAG;
- if (pipe == 1)
- return _MDFLD_PIPEB_EVENT_FLAG;
- if (pipe == 2)
- return _MDFLD_PIPEC_EVENT_FLAG;
- BUG();
-}
-
-static inline u32
-mid_pipe_vsync(int pipe)
-{
- if (pipe == 0)
- return _PSB_VSYNC_PIPEA_FLAG;
- if (pipe == 1)
- return _PSB_VSYNC_PIPEB_FLAG;
- if (pipe == 2)
- return _MDFLD_PIPEC_VBLANK_FLAG;
- BUG();
-}
-
-static inline u32
-mid_pipeconf(int pipe)
-{
- if (pipe == 0)
- return PIPEACONF;
- if (pipe == 1)
- return PIPEBCONF;
- if (pipe == 2)
- return PIPECCONF;
- BUG();
-}
-
-void
-psb_enable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask)
-{
- if ((dev_priv->pipestat[pipe] & mask) != mask) {
- u32 reg = psb_pipestat(pipe);
- dev_priv->pipestat[pipe] |= mask;
- /* Enable the interrupt, clear any pending status */
- if (gma_power_begin(dev_priv->dev, false)) {
- u32 writeVal = PSB_RVDC32(reg);
- writeVal |= (mask | (mask >> 16));
- PSB_WVDC32(writeVal, reg);
- (void) PSB_RVDC32(reg);
- gma_power_end(dev_priv->dev);
- }
- }
-}
-
-void
-psb_disable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask)
-{
- if ((dev_priv->pipestat[pipe] & mask) != 0) {
- u32 reg = psb_pipestat(pipe);
- dev_priv->pipestat[pipe] &= ~mask;
- if (gma_power_begin(dev_priv->dev, false)) {
- u32 writeVal = PSB_RVDC32(reg);
- writeVal &= ~mask;
- PSB_WVDC32(writeVal, reg);
- (void) PSB_RVDC32(reg);
- gma_power_end(dev_priv->dev);
- }
- }
-}
-
-void mid_enable_pipe_event(struct drm_psb_private *dev_priv, int pipe)
-{
- if (gma_power_begin(dev_priv->dev, false)) {
- u32 pipe_event = mid_pipe_event(pipe);
- dev_priv->vdc_irq_mask |= pipe_event;
- PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
- PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
- gma_power_end(dev_priv->dev);
- }
-}
-
-void mid_disable_pipe_event(struct drm_psb_private *dev_priv, int pipe)
-{
- if (dev_priv->pipestat[pipe] == 0) {
- if (gma_power_begin(dev_priv->dev, false)) {
- u32 pipe_event = mid_pipe_event(pipe);
- dev_priv->vdc_irq_mask &= ~pipe_event;
- PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
- PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
- gma_power_end(dev_priv->dev);
- }
- }
-}
-
-/**
- * Display controller interrupt handler for pipe event.
- *
- */
-static void mid_pipe_event_handler(struct drm_device *dev, int pipe)
-{
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *) dev->dev_private;
-
- uint32_t pipe_stat_val = 0;
- uint32_t pipe_stat_reg = psb_pipestat(pipe);
- uint32_t pipe_enable = dev_priv->pipestat[pipe];
- uint32_t pipe_status = dev_priv->pipestat[pipe] >> 16;
- uint32_t pipe_clear;
- uint32_t i = 0;
-
- spin_lock(&dev_priv->irqmask_lock);
-
- pipe_stat_val = PSB_RVDC32(pipe_stat_reg);
- pipe_stat_val &= pipe_enable | pipe_status;
- pipe_stat_val &= pipe_stat_val >> 16;
-
- spin_unlock(&dev_priv->irqmask_lock);
-
- /* Clear the 2nd level interrupt status bits
- * Sometimes the bits are very sticky so we repeat until they unstick */
- for (i = 0; i < 0xffff; i++) {
- PSB_WVDC32(PSB_RVDC32(pipe_stat_reg), pipe_stat_reg);
- pipe_clear = PSB_RVDC32(pipe_stat_reg) & pipe_status;
-
- if (pipe_clear == 0)
- break;
- }
-
- if (pipe_clear)
- dev_err(dev->dev,
- "%s, can't clear status bits for pipe %d, its value = 0x%x.\n",
- __func__, pipe, PSB_RVDC32(pipe_stat_reg));
-
- if (pipe_stat_val & PIPE_VBLANK_STATUS)
- drm_handle_vblank(dev, pipe);
-
- if (pipe_stat_val & PIPE_TE_STATUS)
- drm_handle_vblank(dev, pipe);
-}
-
-/*
- * Display controller interrupt handler.
- */
-static void psb_vdc_interrupt(struct drm_device *dev, uint32_t vdc_stat)
-{
- if (vdc_stat & _PSB_VSYNC_PIPEA_FLAG)
- mid_pipe_event_handler(dev, 0);
-
- if (vdc_stat & _PSB_VSYNC_PIPEB_FLAG)
- mid_pipe_event_handler(dev, 1);
-}
-
-irqreturn_t psb_irq_handler(DRM_IRQ_ARGS)
-{
- struct drm_device *dev = (struct drm_device *) arg;
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *) dev->dev_private;
-
- uint32_t vdc_stat, dsp_int = 0, sgx_int = 0;
- int handled = 0;
-
- spin_lock(&dev_priv->irqmask_lock);
-
- vdc_stat = PSB_RVDC32(PSB_INT_IDENTITY_R);
-
- if (vdc_stat & _PSB_PIPE_EVENT_FLAG)
- dsp_int = 1;
-
- /* FIXME: Handle Medfield
- if (vdc_stat & _MDFLD_DISP_ALL_IRQ_FLAG)
- dsp_int = 1;
- */
-
- if (vdc_stat & _PSB_IRQ_SGX_FLAG)
- sgx_int = 1;
-
- vdc_stat &= dev_priv->vdc_irq_mask;
- spin_unlock(&dev_priv->irqmask_lock);
-
- if (dsp_int && gma_power_is_on(dev)) {
- psb_vdc_interrupt(dev, vdc_stat);
- handled = 1;
- }
-
- if (sgx_int) {
- /* Not expected - we have it masked, shut it up */
- u32 s, s2;
- s = PSB_RSGX32(PSB_CR_EVENT_STATUS);
- s2 = PSB_RSGX32(PSB_CR_EVENT_STATUS2);
- PSB_WSGX32(s, PSB_CR_EVENT_HOST_CLEAR);
- PSB_WSGX32(s2, PSB_CR_EVENT_HOST_CLEAR2);
- /* if s & _PSB_CE_TWOD_COMPLETE we have 2D done but
- we may as well poll even if we add that ! */
- handled = 1;
- }
-
- PSB_WVDC32(vdc_stat, PSB_INT_IDENTITY_R);
- (void) PSB_RVDC32(PSB_INT_IDENTITY_R);
- DRM_READMEMORYBARRIER();
-
- if (!handled)
- return IRQ_NONE;
-
- return IRQ_HANDLED;
-}
-
-void psb_irq_preinstall(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *) dev->dev_private;
- unsigned long irqflags;
-
- spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
-
- if (gma_power_is_on(dev))
- PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM);
- if (dev->vblank_enabled[0])
- dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEA_FLAG;
- if (dev->vblank_enabled[1])
- dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEB_FLAG;
-
- /* FIXME: Handle Medfield irq mask
- if (dev->vblank_enabled[1])
- dev_priv->vdc_irq_mask |= _MDFLD_PIPEB_EVENT_FLAG;
- if (dev->vblank_enabled[2])
- dev_priv->vdc_irq_mask |= _MDFLD_PIPEC_EVENT_FLAG;
- */
-
- /* This register is safe even if display island is off */
- PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
- spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
-}
-
-int psb_irq_postinstall(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *) dev->dev_private;
- unsigned long irqflags;
-
- spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
-
- /* This register is safe even if display island is off */
- PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
- PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM);
-
- if (dev->vblank_enabled[0])
- psb_enable_pipestat(dev_priv, 0, PIPE_VBLANK_INTERRUPT_ENABLE);
- else
- psb_disable_pipestat(dev_priv, 0, PIPE_VBLANK_INTERRUPT_ENABLE);
-
- if (dev->vblank_enabled[1])
- psb_enable_pipestat(dev_priv, 1, PIPE_VBLANK_INTERRUPT_ENABLE);
- else
- psb_disable_pipestat(dev_priv, 1, PIPE_VBLANK_INTERRUPT_ENABLE);
-
- if (dev->vblank_enabled[2])
- psb_enable_pipestat(dev_priv, 2, PIPE_VBLANK_INTERRUPT_ENABLE);
- else
- psb_disable_pipestat(dev_priv, 2, PIPE_VBLANK_INTERRUPT_ENABLE);
-
- spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
- return 0;
-}
-
-void psb_irq_uninstall(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *) dev->dev_private;
- unsigned long irqflags;
-
- spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
-
- PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM);
-
- if (dev->vblank_enabled[0])
- psb_disable_pipestat(dev_priv, 0, PIPE_VBLANK_INTERRUPT_ENABLE);
-
- if (dev->vblank_enabled[1])
- psb_disable_pipestat(dev_priv, 1, PIPE_VBLANK_INTERRUPT_ENABLE);
-
- if (dev->vblank_enabled[2])
- psb_disable_pipestat(dev_priv, 2, PIPE_VBLANK_INTERRUPT_ENABLE);
-
- dev_priv->vdc_irq_mask &= _PSB_IRQ_SGX_FLAG |
- _PSB_IRQ_MSVDX_FLAG |
- _LNC_IRQ_TOPAZ_FLAG;
-
- /* These two registers are safe even if display island is off */
- PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
- PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
-
- wmb();
-
- /* This register is safe even if display island is off */
- PSB_WVDC32(PSB_RVDC32(PSB_INT_IDENTITY_R), PSB_INT_IDENTITY_R);
- spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
-}
-
-void psb_irq_turn_on_dpst(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *) dev->dev_private;
- u32 hist_reg;
- u32 pwm_reg;
-
- if (gma_power_begin(dev, false)) {
- PSB_WVDC32(1 << 31, HISTOGRAM_LOGIC_CONTROL);
- hist_reg = PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL);
- PSB_WVDC32(1 << 31, HISTOGRAM_INT_CONTROL);
- hist_reg = PSB_RVDC32(HISTOGRAM_INT_CONTROL);
-
- PSB_WVDC32(0x80010100, PWM_CONTROL_LOGIC);
- pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC);
- PSB_WVDC32(pwm_reg | PWM_PHASEIN_ENABLE
- | PWM_PHASEIN_INT_ENABLE,
- PWM_CONTROL_LOGIC);
- pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC);
-
- psb_enable_pipestat(dev_priv, 0, PIPE_DPST_EVENT_ENABLE);
-
- hist_reg = PSB_RVDC32(HISTOGRAM_INT_CONTROL);
- PSB_WVDC32(hist_reg | HISTOGRAM_INT_CTRL_CLEAR,
- HISTOGRAM_INT_CONTROL);
- pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC);
- PSB_WVDC32(pwm_reg | 0x80010100 | PWM_PHASEIN_ENABLE,
- PWM_CONTROL_LOGIC);
-
- gma_power_end(dev);
- }
-}
-
-int psb_irq_enable_dpst(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *) dev->dev_private;
- unsigned long irqflags;
-
- spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
-
- /* enable DPST */
- mid_enable_pipe_event(dev_priv, 0);
- psb_irq_turn_on_dpst(dev);
-
- spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
- return 0;
-}
-
-void psb_irq_turn_off_dpst(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *) dev->dev_private;
- u32 hist_reg;
- u32 pwm_reg;
-
- if (gma_power_begin(dev, false)) {
- PSB_WVDC32(0x00000000, HISTOGRAM_INT_CONTROL);
- hist_reg = PSB_RVDC32(HISTOGRAM_INT_CONTROL);
-
- psb_disable_pipestat(dev_priv, 0, PIPE_DPST_EVENT_ENABLE);
-
- pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC);
- PSB_WVDC32(pwm_reg & !(PWM_PHASEIN_INT_ENABLE),
- PWM_CONTROL_LOGIC);
- pwm_reg = PSB_RVDC32(PWM_CONTROL_LOGIC);
-
- gma_power_end(dev);
- }
-}
-
-int psb_irq_disable_dpst(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *) dev->dev_private;
- unsigned long irqflags;
-
- spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
-
- mid_disable_pipe_event(dev_priv, 0);
- psb_irq_turn_off_dpst(dev);
-
- spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
-
- return 0;
-}
-
-#ifdef PSB_FIXME
-static int psb_vblank_do_wait(struct drm_device *dev,
- unsigned int *sequence, atomic_t *counter)
-{
- unsigned int cur_vblank;
- int ret = 0;
- DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
- (((cur_vblank = atomic_read(counter))
- - *sequence) <= (1 << 23)));
- *sequence = cur_vblank;
-
- return ret;
-}
-#endif
-
-/*
- * It is used to enable VBLANK interrupt
- */
-int psb_enable_vblank(struct drm_device *dev, int pipe)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- unsigned long irqflags;
- uint32_t reg_val = 0;
- uint32_t pipeconf_reg = mid_pipeconf(pipe);
-
-#if defined(CONFIG_DRM_PSB_MFLD)
- /* Medfield is different - we should perhaps extract out vblank
- and blacklight etc ops */
- if (IS_MFLD(dev) && !mdfld_panel_dpi(dev))
- return mdfld_enable_te(dev, pipe);
-#endif
- if (gma_power_begin(dev, false)) {
- reg_val = REG_READ(pipeconf_reg);
- gma_power_end(dev);
- }
-
- if (!(reg_val & PIPEACONF_ENABLE))
- return -EINVAL;
-
- spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
-
- if (pipe == 0)
- dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEA_FLAG;
- else if (pipe == 1)
- dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEB_FLAG;
-
- PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
- PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
- psb_enable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_ENABLE);
-
- spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
-
- return 0;
-}
-
-/*
- * It is used to disable VBLANK interrupt
- */
-void psb_disable_vblank(struct drm_device *dev, int pipe)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- unsigned long irqflags;
-
-#if defined(CONFIG_DRM_PSB_MFLD)
- if (IS_MFLD(dev) && !mdfld_panel_dpi(dev))
- mdfld_disable_te(dev, pipe);
-#endif
- spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
-
- if (pipe == 0)
- dev_priv->vdc_irq_mask &= ~_PSB_VSYNC_PIPEA_FLAG;
- else if (pipe == 1)
- dev_priv->vdc_irq_mask &= ~_PSB_VSYNC_PIPEB_FLAG;
-
- PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
- PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
- psb_disable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_ENABLE);
-
- spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
-}
-
-/**
- * mdfld_enable_te - enable TE events
- * @dev: our DRM device
- * @pipe: which pipe to work on
- *
- * Enable TE events on a Medfield display pipe. Medfield specific.
- */
-int mdfld_enable_te(struct drm_device *dev, int pipe)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- unsigned long flags;
- uint32_t reg_val = 0;
- uint32_t pipeconf_reg = mid_pipeconf(pipe);
-
- if (gma_power_begin(dev, false)) {
- reg_val = REG_READ(pipeconf_reg);
- gma_power_end(dev);
- }
-
- if (!(reg_val & PIPEACONF_ENABLE))
- return -EINVAL;
-
- spin_lock_irqsave(&dev_priv->irqmask_lock, flags);
-
- mid_enable_pipe_event(dev_priv, pipe);
- psb_enable_pipestat(dev_priv, pipe, PIPE_TE_ENABLE);
-
- spin_unlock_irqrestore(&dev_priv->irqmask_lock, flags);
-
- return 0;
-}
-
-/**
- * mdfld_disable_te - disable TE events
- * @dev: our DRM device
- * @pipe: which pipe to work on
- *
- * Disable TE events on a Medfield display pipe. Medfield specific.
- */
-void mdfld_disable_te(struct drm_device *dev, int pipe)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- unsigned long flags;
-
- spin_lock_irqsave(&dev_priv->irqmask_lock, flags);
-
- mid_disable_pipe_event(dev_priv, pipe);
- psb_disable_pipestat(dev_priv, pipe, PIPE_TE_ENABLE);
-
- spin_unlock_irqrestore(&dev_priv->irqmask_lock, flags);
-}
-
-/* Called from drm generic code, passed a 'crtc', which
- * we use as a pipe index
- */
-u32 psb_get_vblank_counter(struct drm_device *dev, int pipe)
-{
- uint32_t high_frame = PIPEAFRAMEHIGH;
- uint32_t low_frame = PIPEAFRAMEPIXEL;
- uint32_t pipeconf_reg = PIPEACONF;
- uint32_t reg_val = 0;
- uint32_t high1 = 0, high2 = 0, low = 0, count = 0;
-
- switch (pipe) {
- case 0:
- break;
- case 1:
- high_frame = PIPEBFRAMEHIGH;
- low_frame = PIPEBFRAMEPIXEL;
- pipeconf_reg = PIPEBCONF;
- break;
- case 2:
- high_frame = PIPECFRAMEHIGH;
- low_frame = PIPECFRAMEPIXEL;
- pipeconf_reg = PIPECCONF;
- break;
- default:
- dev_err(dev->dev, "%s, invalid pipe.\n", __func__);
- return 0;
- }
-
- if (!gma_power_begin(dev, false))
- return 0;
-
- reg_val = REG_READ(pipeconf_reg);
-
- if (!(reg_val & PIPEACONF_ENABLE)) {
- dev_err(dev->dev, "trying to get vblank count for disabled pipe %d\n",
- pipe);
- goto psb_get_vblank_counter_exit;
- }
-
- /*
- * High & low register fields aren't synchronized, so make sure
- * we get a low value that's stable across two reads of the high
- * register.
- */
- do {
- high1 = ((REG_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
- PIPE_FRAME_HIGH_SHIFT);
- low = ((REG_READ(low_frame) & PIPE_FRAME_LOW_MASK) >>
- PIPE_FRAME_LOW_SHIFT);
- high2 = ((REG_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
- PIPE_FRAME_HIGH_SHIFT);
- } while (high1 != high2);
-
- count = (high1 << 8) | low;
-
-psb_get_vblank_counter_exit:
-
- gma_power_end(dev);
-
- return count;
-}
-
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2009-2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors:
- * Benjamin Defnet <benjamin.r.defnet@intel.com>
- * Rajesh Poornachandran <rajesh.poornachandran@intel.com>
- *
- **************************************************************************/
-
-#ifndef _SYSIRQ_H_
-#define _SYSIRQ_H_
-
-#include <drm/drmP.h>
-
-bool sysirq_init(struct drm_device *dev);
-void sysirq_uninit(struct drm_device *dev);
-
-void psb_irq_preinstall(struct drm_device *dev);
-int psb_irq_postinstall(struct drm_device *dev);
-void psb_irq_uninstall(struct drm_device *dev);
-irqreturn_t psb_irq_handler(DRM_IRQ_ARGS);
-
-int psb_irq_enable_dpst(struct drm_device *dev);
-int psb_irq_disable_dpst(struct drm_device *dev);
-void psb_irq_turn_on_dpst(struct drm_device *dev);
-void psb_irq_turn_off_dpst(struct drm_device *dev);
-int psb_enable_vblank(struct drm_device *dev, int pipe);
-void psb_disable_vblank(struct drm_device *dev, int pipe);
-u32 psb_get_vblank_counter(struct drm_device *dev, int pipe);
-
-#endif /* _SYSIRQ_H_ */
+++ /dev/null
-/**************************************************************************
- * Copyright (c) 2007, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Authors: Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
- **************************************************************************/
-
-#include <drm/drmP.h>
-#include "psb_drv.h"
-#include "psb_reg.h"
-#include "psb_intel_reg.h"
-#include <linux/spinlock.h>
-
-static void psb_lid_timer_func(unsigned long data)
-{
- struct drm_psb_private * dev_priv = (struct drm_psb_private *)data;
- struct drm_device *dev = (struct drm_device *)dev_priv->dev;
- struct timer_list *lid_timer = &dev_priv->lid_timer;
- unsigned long irq_flags;
- u32 *lid_state = dev_priv->lid_state;
- u32 pp_status;
-
- if (readl(lid_state) == dev_priv->lid_last_state)
- goto lid_timer_schedule;
-
- if ((readl(lid_state)) & 0x01) {
- /*lid state is open*/
- REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | POWER_TARGET_ON);
- do {
- pp_status = REG_READ(PP_STATUS);
- } while ((pp_status & PP_ON) == 0);
-
- /*FIXME: should be backlight level before*/
- psb_intel_lvds_set_brightness(dev, 100);
- } else {
- psb_intel_lvds_set_brightness(dev, 0);
-
- REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & ~POWER_TARGET_ON);
- do {
- pp_status = REG_READ(PP_STATUS);
- } while ((pp_status & PP_ON) == 0);
- }
- dev_priv->lid_last_state = readl(lid_state);
-
-lid_timer_schedule:
- spin_lock_irqsave(&dev_priv->lid_lock, irq_flags);
- if (!timer_pending(lid_timer)) {
- lid_timer->expires = jiffies + PSB_LID_DELAY;
- add_timer(lid_timer);
- }
- spin_unlock_irqrestore(&dev_priv->lid_lock, irq_flags);
-}
-
-void psb_lid_timer_init(struct drm_psb_private *dev_priv)
-{
- struct timer_list *lid_timer = &dev_priv->lid_timer;
- unsigned long irq_flags;
-
- spin_lock_init(&dev_priv->lid_lock);
- spin_lock_irqsave(&dev_priv->lid_lock, irq_flags);
-
- init_timer(lid_timer);
-
- lid_timer->data = (unsigned long)dev_priv;
- lid_timer->function = psb_lid_timer_func;
- lid_timer->expires = jiffies + PSB_LID_DELAY;
-
- add_timer(lid_timer);
- spin_unlock_irqrestore(&dev_priv->lid_lock, irq_flags);
-}
-
-void psb_lid_timer_takedown(struct drm_psb_private *dev_priv)
-{
- del_timer_sync(&dev_priv->lid_timer);
-}
-
+++ /dev/null
-/**************************************************************************
- *
- * Copyright (c) (2005-2007) Imagination Technologies Limited.
- * Copyright (c) 2007, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA..
- *
- **************************************************************************/
-
-#ifndef _PSB_REG_H_
-#define _PSB_REG_H_
-
-#define PSB_CR_CLKGATECTL 0x0000
-#define _PSB_C_CLKGATECTL_AUTO_MAN_REG (1 << 24)
-#define _PSB_C_CLKGATECTL_USE_CLKG_SHIFT (20)
-#define _PSB_C_CLKGATECTL_USE_CLKG_MASK (0x3 << 20)
-#define _PSB_C_CLKGATECTL_DPM_CLKG_SHIFT (16)
-#define _PSB_C_CLKGATECTL_DPM_CLKG_MASK (0x3 << 16)
-#define _PSB_C_CLKGATECTL_TA_CLKG_SHIFT (12)
-#define _PSB_C_CLKGATECTL_TA_CLKG_MASK (0x3 << 12)
-#define _PSB_C_CLKGATECTL_TSP_CLKG_SHIFT (8)
-#define _PSB_C_CLKGATECTL_TSP_CLKG_MASK (0x3 << 8)
-#define _PSB_C_CLKGATECTL_ISP_CLKG_SHIFT (4)
-#define _PSB_C_CLKGATECTL_ISP_CLKG_MASK (0x3 << 4)
-#define _PSB_C_CLKGATECTL_2D_CLKG_SHIFT (0)
-#define _PSB_C_CLKGATECTL_2D_CLKG_MASK (0x3 << 0)
-#define _PSB_C_CLKGATECTL_CLKG_ENABLED (0)
-#define _PSB_C_CLKGATECTL_CLKG_DISABLED (1)
-#define _PSB_C_CLKGATECTL_CLKG_AUTO (2)
-
-#define PSB_CR_CORE_ID 0x0010
-#define _PSB_CC_ID_ID_SHIFT (16)
-#define _PSB_CC_ID_ID_MASK (0xFFFF << 16)
-#define _PSB_CC_ID_CONFIG_SHIFT (0)
-#define _PSB_CC_ID_CONFIG_MASK (0xFFFF << 0)
-
-#define PSB_CR_CORE_REVISION 0x0014
-#define _PSB_CC_REVISION_DESIGNER_SHIFT (24)
-#define _PSB_CC_REVISION_DESIGNER_MASK (0xFF << 24)
-#define _PSB_CC_REVISION_MAJOR_SHIFT (16)
-#define _PSB_CC_REVISION_MAJOR_MASK (0xFF << 16)
-#define _PSB_CC_REVISION_MINOR_SHIFT (8)
-#define _PSB_CC_REVISION_MINOR_MASK (0xFF << 8)
-#define _PSB_CC_REVISION_MAINTENANCE_SHIFT (0)
-#define _PSB_CC_REVISION_MAINTENANCE_MASK (0xFF << 0)
-
-#define PSB_CR_DESIGNER_REV_FIELD1 0x0018
-
-#define PSB_CR_SOFT_RESET 0x0080
-#define _PSB_CS_RESET_TSP_RESET (1 << 6)
-#define _PSB_CS_RESET_ISP_RESET (1 << 5)
-#define _PSB_CS_RESET_USE_RESET (1 << 4)
-#define _PSB_CS_RESET_TA_RESET (1 << 3)
-#define _PSB_CS_RESET_DPM_RESET (1 << 2)
-#define _PSB_CS_RESET_TWOD_RESET (1 << 1)
-#define _PSB_CS_RESET_BIF_RESET (1 << 0)
-
-#define PSB_CR_DESIGNER_REV_FIELD2 0x001C
-
-#define PSB_CR_EVENT_HOST_ENABLE2 0x0110
-
-#define PSB_CR_EVENT_STATUS2 0x0118
-
-#define PSB_CR_EVENT_HOST_CLEAR2 0x0114
-#define _PSB_CE2_BIF_REQUESTER_FAULT (1 << 4)
-
-#define PSB_CR_EVENT_STATUS 0x012C
-
-#define PSB_CR_EVENT_HOST_ENABLE 0x0130
-
-#define PSB_CR_EVENT_HOST_CLEAR 0x0134
-#define _PSB_CE_MASTER_INTERRUPT (1 << 31)
-#define _PSB_CE_TA_DPM_FAULT (1 << 28)
-#define _PSB_CE_TWOD_COMPLETE (1 << 27)
-#define _PSB_CE_DPM_OUT_OF_MEMORY_ZLS (1 << 25)
-#define _PSB_CE_DPM_TA_MEM_FREE (1 << 24)
-#define _PSB_CE_PIXELBE_END_RENDER (1 << 18)
-#define _PSB_CE_SW_EVENT (1 << 14)
-#define _PSB_CE_TA_FINISHED (1 << 13)
-#define _PSB_CE_TA_TERMINATE (1 << 12)
-#define _PSB_CE_DPM_REACHED_MEM_THRESH (1 << 3)
-#define _PSB_CE_DPM_OUT_OF_MEMORY_GBL (1 << 2)
-#define _PSB_CE_DPM_OUT_OF_MEMORY_MT (1 << 1)
-#define _PSB_CE_DPM_3D_MEM_FREE (1 << 0)
-
-
-#define PSB_USE_OFFSET_MASK 0x0007FFFF
-#define PSB_USE_OFFSET_SIZE (PSB_USE_OFFSET_MASK + 1)
-#define PSB_CR_USE_CODE_BASE0 0x0A0C
-#define PSB_CR_USE_CODE_BASE1 0x0A10
-#define PSB_CR_USE_CODE_BASE2 0x0A14
-#define PSB_CR_USE_CODE_BASE3 0x0A18
-#define PSB_CR_USE_CODE_BASE4 0x0A1C
-#define PSB_CR_USE_CODE_BASE5 0x0A20
-#define PSB_CR_USE_CODE_BASE6 0x0A24
-#define PSB_CR_USE_CODE_BASE7 0x0A28
-#define PSB_CR_USE_CODE_BASE8 0x0A2C
-#define PSB_CR_USE_CODE_BASE9 0x0A30
-#define PSB_CR_USE_CODE_BASE10 0x0A34
-#define PSB_CR_USE_CODE_BASE11 0x0A38
-#define PSB_CR_USE_CODE_BASE12 0x0A3C
-#define PSB_CR_USE_CODE_BASE13 0x0A40
-#define PSB_CR_USE_CODE_BASE14 0x0A44
-#define PSB_CR_USE_CODE_BASE15 0x0A48
-#define PSB_CR_USE_CODE_BASE(_i) (0x0A0C + ((_i) << 2))
-#define _PSB_CUC_BASE_DM_SHIFT (25)
-#define _PSB_CUC_BASE_DM_MASK (0x3 << 25)
-#define _PSB_CUC_BASE_ADDR_SHIFT (0) /* 1024-bit aligned address? */
-#define _PSB_CUC_BASE_ADDR_ALIGNSHIFT (7)
-#define _PSB_CUC_BASE_ADDR_MASK (0x1FFFFFF << 0)
-#define _PSB_CUC_DM_VERTEX (0)
-#define _PSB_CUC_DM_PIXEL (1)
-#define _PSB_CUC_DM_RESERVED (2)
-#define _PSB_CUC_DM_EDM (3)
-
-#define PSB_CR_PDS_EXEC_BASE 0x0AB8
-#define _PSB_CR_PDS_EXEC_BASE_ADDR_SHIFT (20) /* 1MB aligned address */
-#define _PSB_CR_PDS_EXEC_BASE_ADDR_ALIGNSHIFT (20)
-
-#define PSB_CR_EVENT_KICKER 0x0AC4
-#define _PSB_CE_KICKER_ADDRESS_SHIFT (4) /* 128-bit aligned address */
-
-#define PSB_CR_EVENT_KICK 0x0AC8
-#define _PSB_CE_KICK_NOW (1 << 0)
-
-#define PSB_CR_BIF_DIR_LIST_BASE1 0x0C38
-
-#define PSB_CR_BIF_CTRL 0x0C00
-#define _PSB_CB_CTRL_CLEAR_FAULT (1 << 4)
-#define _PSB_CB_CTRL_INVALDC (1 << 3)
-#define _PSB_CB_CTRL_FLUSH (1 << 2)
-
-#define PSB_CR_BIF_INT_STAT 0x0C04
-
-#define PSB_CR_BIF_FAULT 0x0C08
-#define _PSB_CBI_STAT_PF_N_RW (1 << 14)
-#define _PSB_CBI_STAT_FAULT_SHIFT (0)
-#define _PSB_CBI_STAT_FAULT_MASK (0x3FFF << 0)
-#define _PSB_CBI_STAT_FAULT_CACHE (1 << 1)
-#define _PSB_CBI_STAT_FAULT_TA (1 << 2)
-#define _PSB_CBI_STAT_FAULT_VDM (1 << 3)
-#define _PSB_CBI_STAT_FAULT_2D (1 << 4)
-#define _PSB_CBI_STAT_FAULT_PBE (1 << 5)
-#define _PSB_CBI_STAT_FAULT_TSP (1 << 6)
-#define _PSB_CBI_STAT_FAULT_ISP (1 << 7)
-#define _PSB_CBI_STAT_FAULT_USSEPDS (1 << 8)
-#define _PSB_CBI_STAT_FAULT_HOST (1 << 9)
-
-#define PSB_CR_BIF_BANK0 0x0C78
-#define PSB_CR_BIF_BANK1 0x0C7C
-#define PSB_CR_BIF_DIR_LIST_BASE0 0x0C84
-#define PSB_CR_BIF_TWOD_REQ_BASE 0x0C88
-#define PSB_CR_BIF_3D_REQ_BASE 0x0CAC
-
-#define PSB_CR_2D_SOCIF 0x0E18
-#define _PSB_C2_SOCIF_FREESPACE_SHIFT (0)
-#define _PSB_C2_SOCIF_FREESPACE_MASK (0xFF << 0)
-#define _PSB_C2_SOCIF_EMPTY (0x80 << 0)
-
-#define PSB_CR_2D_BLIT_STATUS 0x0E04
-#define _PSB_C2B_STATUS_BUSY (1 << 24)
-#define _PSB_C2B_STATUS_COMPLETE_SHIFT (0)
-#define _PSB_C2B_STATUS_COMPLETE_MASK (0xFFFFFF << 0)
-
-/*
- * 2D defs.
- */
-
-/*
- * 2D Slave Port Data : Block Header's Object Type
- */
-
-#define PSB_2D_CLIP_BH (0x00000000)
-#define PSB_2D_PAT_BH (0x10000000)
-#define PSB_2D_CTRL_BH (0x20000000)
-#define PSB_2D_SRC_OFF_BH (0x30000000)
-#define PSB_2D_MASK_OFF_BH (0x40000000)
-#define PSB_2D_RESERVED1_BH (0x50000000)
-#define PSB_2D_RESERVED2_BH (0x60000000)
-#define PSB_2D_FENCE_BH (0x70000000)
-#define PSB_2D_BLIT_BH (0x80000000)
-#define PSB_2D_SRC_SURF_BH (0x90000000)
-#define PSB_2D_DST_SURF_BH (0xA0000000)
-#define PSB_2D_PAT_SURF_BH (0xB0000000)
-#define PSB_2D_SRC_PAL_BH (0xC0000000)
-#define PSB_2D_PAT_PAL_BH (0xD0000000)
-#define PSB_2D_MASK_SURF_BH (0xE0000000)
-#define PSB_2D_FLUSH_BH (0xF0000000)
-
-/*
- * Clip Definition block (PSB_2D_CLIP_BH)
- */
-#define PSB_2D_CLIPCOUNT_MAX (1)
-#define PSB_2D_CLIPCOUNT_MASK (0x00000000)
-#define PSB_2D_CLIPCOUNT_CLRMASK (0xFFFFFFFF)
-#define PSB_2D_CLIPCOUNT_SHIFT (0)
-/* clip rectangle min & max */
-#define PSB_2D_CLIP_XMAX_MASK (0x00FFF000)
-#define PSB_2D_CLIP_XMAX_CLRMASK (0xFF000FFF)
-#define PSB_2D_CLIP_XMAX_SHIFT (12)
-#define PSB_2D_CLIP_XMIN_MASK (0x00000FFF)
-#define PSB_2D_CLIP_XMIN_CLRMASK (0x00FFF000)
-#define PSB_2D_CLIP_XMIN_SHIFT (0)
-/* clip rectangle offset */
-#define PSB_2D_CLIP_YMAX_MASK (0x00FFF000)
-#define PSB_2D_CLIP_YMAX_CLRMASK (0xFF000FFF)
-#define PSB_2D_CLIP_YMAX_SHIFT (12)
-#define PSB_2D_CLIP_YMIN_MASK (0x00000FFF)
-#define PSB_2D_CLIP_YMIN_CLRMASK (0x00FFF000)
-#define PSB_2D_CLIP_YMIN_SHIFT (0)
-
-/*
- * Pattern Control (PSB_2D_PAT_BH)
- */
-#define PSB_2D_PAT_HEIGHT_MASK (0x0000001F)
-#define PSB_2D_PAT_HEIGHT_SHIFT (0)
-#define PSB_2D_PAT_WIDTH_MASK (0x000003E0)
-#define PSB_2D_PAT_WIDTH_SHIFT (5)
-#define PSB_2D_PAT_YSTART_MASK (0x00007C00)
-#define PSB_2D_PAT_YSTART_SHIFT (10)
-#define PSB_2D_PAT_XSTART_MASK (0x000F8000)
-#define PSB_2D_PAT_XSTART_SHIFT (15)
-
-/*
- * 2D Control block (PSB_2D_CTRL_BH)
- */
-/* Present Flags */
-#define PSB_2D_SRCCK_CTRL (0x00000001)
-#define PSB_2D_DSTCK_CTRL (0x00000002)
-#define PSB_2D_ALPHA_CTRL (0x00000004)
-/* Colour Key Colour (SRC/DST)*/
-#define PSB_2D_CK_COL_MASK (0xFFFFFFFF)
-#define PSB_2D_CK_COL_CLRMASK (0x00000000)
-#define PSB_2D_CK_COL_SHIFT (0)
-/* Colour Key Mask (SRC/DST)*/
-#define PSB_2D_CK_MASK_MASK (0xFFFFFFFF)
-#define PSB_2D_CK_MASK_CLRMASK (0x00000000)
-#define PSB_2D_CK_MASK_SHIFT (0)
-/* Alpha Control (Alpha/RGB)*/
-#define PSB_2D_GBLALPHA_MASK (0x000FF000)
-#define PSB_2D_GBLALPHA_CLRMASK (0xFFF00FFF)
-#define PSB_2D_GBLALPHA_SHIFT (12)
-#define PSB_2D_SRCALPHA_OP_MASK (0x00700000)
-#define PSB_2D_SRCALPHA_OP_CLRMASK (0xFF8FFFFF)
-#define PSB_2D_SRCALPHA_OP_SHIFT (20)
-#define PSB_2D_SRCALPHA_OP_ONE (0x00000000)
-#define PSB_2D_SRCALPHA_OP_SRC (0x00100000)
-#define PSB_2D_SRCALPHA_OP_DST (0x00200000)
-#define PSB_2D_SRCALPHA_OP_SG (0x00300000)
-#define PSB_2D_SRCALPHA_OP_DG (0x00400000)
-#define PSB_2D_SRCALPHA_OP_GBL (0x00500000)
-#define PSB_2D_SRCALPHA_OP_ZERO (0x00600000)
-#define PSB_2D_SRCALPHA_INVERT (0x00800000)
-#define PSB_2D_SRCALPHA_INVERT_CLR (0xFF7FFFFF)
-#define PSB_2D_DSTALPHA_OP_MASK (0x07000000)
-#define PSB_2D_DSTALPHA_OP_CLRMASK (0xF8FFFFFF)
-#define PSB_2D_DSTALPHA_OP_SHIFT (24)
-#define PSB_2D_DSTALPHA_OP_ONE (0x00000000)
-#define PSB_2D_DSTALPHA_OP_SRC (0x01000000)
-#define PSB_2D_DSTALPHA_OP_DST (0x02000000)
-#define PSB_2D_DSTALPHA_OP_SG (0x03000000)
-#define PSB_2D_DSTALPHA_OP_DG (0x04000000)
-#define PSB_2D_DSTALPHA_OP_GBL (0x05000000)
-#define PSB_2D_DSTALPHA_OP_ZERO (0x06000000)
-#define PSB_2D_DSTALPHA_INVERT (0x08000000)
-#define PSB_2D_DSTALPHA_INVERT_CLR (0xF7FFFFFF)
-
-#define PSB_2D_PRE_MULTIPLICATION_ENABLE (0x10000000)
-#define PSB_2D_PRE_MULTIPLICATION_CLRMASK (0xEFFFFFFF)
-#define PSB_2D_ZERO_SOURCE_ALPHA_ENABLE (0x20000000)
-#define PSB_2D_ZERO_SOURCE_ALPHA_CLRMASK (0xDFFFFFFF)
-
-/*
- *Source Offset (PSB_2D_SRC_OFF_BH)
- */
-#define PSB_2D_SRCOFF_XSTART_MASK ((0x00000FFF) << 12)
-#define PSB_2D_SRCOFF_XSTART_SHIFT (12)
-#define PSB_2D_SRCOFF_YSTART_MASK (0x00000FFF)
-#define PSB_2D_SRCOFF_YSTART_SHIFT (0)
-
-/*
- * Mask Offset (PSB_2D_MASK_OFF_BH)
- */
-#define PSB_2D_MASKOFF_XSTART_MASK ((0x00000FFF) << 12)
-#define PSB_2D_MASKOFF_XSTART_SHIFT (12)
-#define PSB_2D_MASKOFF_YSTART_MASK (0x00000FFF)
-#define PSB_2D_MASKOFF_YSTART_SHIFT (0)
-
-/*
- * 2D Fence (see PSB_2D_FENCE_BH): bits 0:27 are ignored
- */
-
-/*
- *Blit Rectangle (PSB_2D_BLIT_BH)
- */
-
-#define PSB_2D_ROT_MASK (3 << 25)
-#define PSB_2D_ROT_CLRMASK (~PSB_2D_ROT_MASK)
-#define PSB_2D_ROT_NONE (0 << 25)
-#define PSB_2D_ROT_90DEGS (1 << 25)
-#define PSB_2D_ROT_180DEGS (2 << 25)
-#define PSB_2D_ROT_270DEGS (3 << 25)
-
-#define PSB_2D_COPYORDER_MASK (3 << 23)
-#define PSB_2D_COPYORDER_CLRMASK (~PSB_2D_COPYORDER_MASK)
-#define PSB_2D_COPYORDER_TL2BR (0 << 23)
-#define PSB_2D_COPYORDER_BR2TL (1 << 23)
-#define PSB_2D_COPYORDER_TR2BL (2 << 23)
-#define PSB_2D_COPYORDER_BL2TR (3 << 23)
-
-#define PSB_2D_DSTCK_CLRMASK (0xFF9FFFFF)
-#define PSB_2D_DSTCK_DISABLE (0x00000000)
-#define PSB_2D_DSTCK_PASS (0x00200000)
-#define PSB_2D_DSTCK_REJECT (0x00400000)
-
-#define PSB_2D_SRCCK_CLRMASK (0xFFE7FFFF)
-#define PSB_2D_SRCCK_DISABLE (0x00000000)
-#define PSB_2D_SRCCK_PASS (0x00080000)
-#define PSB_2D_SRCCK_REJECT (0x00100000)
-
-#define PSB_2D_CLIP_ENABLE (0x00040000)
-
-#define PSB_2D_ALPHA_ENABLE (0x00020000)
-
-#define PSB_2D_PAT_CLRMASK (0xFFFEFFFF)
-#define PSB_2D_PAT_MASK (0x00010000)
-#define PSB_2D_USE_PAT (0x00010000)
-#define PSB_2D_USE_FILL (0x00000000)
-/*
- * Tungsten Graphics note on rop codes: If rop A and rop B are
- * identical, the mask surface will not be read and need not be
- * set up.
- */
-
-#define PSB_2D_ROP3B_MASK (0x0000FF00)
-#define PSB_2D_ROP3B_CLRMASK (0xFFFF00FF)
-#define PSB_2D_ROP3B_SHIFT (8)
-/* rop code A */
-#define PSB_2D_ROP3A_MASK (0x000000FF)
-#define PSB_2D_ROP3A_CLRMASK (0xFFFFFF00)
-#define PSB_2D_ROP3A_SHIFT (0)
-
-#define PSB_2D_ROP4_MASK (0x0000FFFF)
-/*
- * DWORD0: (Only pass if Pattern control == Use Fill Colour)
- * Fill Colour RGBA8888
- */
-#define PSB_2D_FILLCOLOUR_MASK (0xFFFFFFFF)
-#define PSB_2D_FILLCOLOUR_SHIFT (0)
-/*
- * DWORD1: (Always Present)
- * X Start (Dest)
- * Y Start (Dest)
- */
-#define PSB_2D_DST_XSTART_MASK (0x00FFF000)
-#define PSB_2D_DST_XSTART_CLRMASK (0xFF000FFF)
-#define PSB_2D_DST_XSTART_SHIFT (12)
-#define PSB_2D_DST_YSTART_MASK (0x00000FFF)
-#define PSB_2D_DST_YSTART_CLRMASK (0xFFFFF000)
-#define PSB_2D_DST_YSTART_SHIFT (0)
-/*
- * DWORD2: (Always Present)
- * X Size (Dest)
- * Y Size (Dest)
- */
-#define PSB_2D_DST_XSIZE_MASK (0x00FFF000)
-#define PSB_2D_DST_XSIZE_CLRMASK (0xFF000FFF)
-#define PSB_2D_DST_XSIZE_SHIFT (12)
-#define PSB_2D_DST_YSIZE_MASK (0x00000FFF)
-#define PSB_2D_DST_YSIZE_CLRMASK (0xFFFFF000)
-#define PSB_2D_DST_YSIZE_SHIFT (0)
-
-/*
- * Source Surface (PSB_2D_SRC_SURF_BH)
- */
-/*
- * WORD 0
- */
-
-#define PSB_2D_SRC_FORMAT_MASK (0x00078000)
-#define PSB_2D_SRC_1_PAL (0x00000000)
-#define PSB_2D_SRC_2_PAL (0x00008000)
-#define PSB_2D_SRC_4_PAL (0x00010000)
-#define PSB_2D_SRC_8_PAL (0x00018000)
-#define PSB_2D_SRC_8_ALPHA (0x00020000)
-#define PSB_2D_SRC_4_ALPHA (0x00028000)
-#define PSB_2D_SRC_332RGB (0x00030000)
-#define PSB_2D_SRC_4444ARGB (0x00038000)
-#define PSB_2D_SRC_555RGB (0x00040000)
-#define PSB_2D_SRC_1555ARGB (0x00048000)
-#define PSB_2D_SRC_565RGB (0x00050000)
-#define PSB_2D_SRC_0888ARGB (0x00058000)
-#define PSB_2D_SRC_8888ARGB (0x00060000)
-#define PSB_2D_SRC_8888UYVY (0x00068000)
-#define PSB_2D_SRC_RESERVED (0x00070000)
-#define PSB_2D_SRC_1555ARGB_LOOKUP (0x00078000)
-
-
-#define PSB_2D_SRC_STRIDE_MASK (0x00007FFF)
-#define PSB_2D_SRC_STRIDE_CLRMASK (0xFFFF8000)
-#define PSB_2D_SRC_STRIDE_SHIFT (0)
-/*
- * WORD 1 - Base Address
- */
-#define PSB_2D_SRC_ADDR_MASK (0x0FFFFFFC)
-#define PSB_2D_SRC_ADDR_CLRMASK (0x00000003)
-#define PSB_2D_SRC_ADDR_SHIFT (2)
-#define PSB_2D_SRC_ADDR_ALIGNSHIFT (2)
-
-/*
- * Pattern Surface (PSB_2D_PAT_SURF_BH)
- */
-/*
- * WORD 0
- */
-
-#define PSB_2D_PAT_FORMAT_MASK (0x00078000)
-#define PSB_2D_PAT_1_PAL (0x00000000)
-#define PSB_2D_PAT_2_PAL (0x00008000)
-#define PSB_2D_PAT_4_PAL (0x00010000)
-#define PSB_2D_PAT_8_PAL (0x00018000)
-#define PSB_2D_PAT_8_ALPHA (0x00020000)
-#define PSB_2D_PAT_4_ALPHA (0x00028000)
-#define PSB_2D_PAT_332RGB (0x00030000)
-#define PSB_2D_PAT_4444ARGB (0x00038000)
-#define PSB_2D_PAT_555RGB (0x00040000)
-#define PSB_2D_PAT_1555ARGB (0x00048000)
-#define PSB_2D_PAT_565RGB (0x00050000)
-#define PSB_2D_PAT_0888ARGB (0x00058000)
-#define PSB_2D_PAT_8888ARGB (0x00060000)
-
-#define PSB_2D_PAT_STRIDE_MASK (0x00007FFF)
-#define PSB_2D_PAT_STRIDE_CLRMASK (0xFFFF8000)
-#define PSB_2D_PAT_STRIDE_SHIFT (0)
-/*
- * WORD 1 - Base Address
- */
-#define PSB_2D_PAT_ADDR_MASK (0x0FFFFFFC)
-#define PSB_2D_PAT_ADDR_CLRMASK (0x00000003)
-#define PSB_2D_PAT_ADDR_SHIFT (2)
-#define PSB_2D_PAT_ADDR_ALIGNSHIFT (2)
-
-/*
- * Destination Surface (PSB_2D_DST_SURF_BH)
- */
-/*
- * WORD 0
- */
-
-#define PSB_2D_DST_FORMAT_MASK (0x00078000)
-#define PSB_2D_DST_332RGB (0x00030000)
-#define PSB_2D_DST_4444ARGB (0x00038000)
-#define PSB_2D_DST_555RGB (0x00040000)
-#define PSB_2D_DST_1555ARGB (0x00048000)
-#define PSB_2D_DST_565RGB (0x00050000)
-#define PSB_2D_DST_0888ARGB (0x00058000)
-#define PSB_2D_DST_8888ARGB (0x00060000)
-#define PSB_2D_DST_8888AYUV (0x00070000)
-
-#define PSB_2D_DST_STRIDE_MASK (0x00007FFF)
-#define PSB_2D_DST_STRIDE_CLRMASK (0xFFFF8000)
-#define PSB_2D_DST_STRIDE_SHIFT (0)
-/*
- * WORD 1 - Base Address
- */
-#define PSB_2D_DST_ADDR_MASK (0x0FFFFFFC)
-#define PSB_2D_DST_ADDR_CLRMASK (0x00000003)
-#define PSB_2D_DST_ADDR_SHIFT (2)
-#define PSB_2D_DST_ADDR_ALIGNSHIFT (2)
-
-/*
- * Mask Surface (PSB_2D_MASK_SURF_BH)
- */
-/*
- * WORD 0
- */
-#define PSB_2D_MASK_STRIDE_MASK (0x00007FFF)
-#define PSB_2D_MASK_STRIDE_CLRMASK (0xFFFF8000)
-#define PSB_2D_MASK_STRIDE_SHIFT (0)
-/*
- * WORD 1 - Base Address
- */
-#define PSB_2D_MASK_ADDR_MASK (0x0FFFFFFC)
-#define PSB_2D_MASK_ADDR_CLRMASK (0x00000003)
-#define PSB_2D_MASK_ADDR_SHIFT (2)
-#define PSB_2D_MASK_ADDR_ALIGNSHIFT (2)
-
-/*
- * Source Palette (PSB_2D_SRC_PAL_BH)
- */
-
-#define PSB_2D_SRCPAL_ADDR_SHIFT (0)
-#define PSB_2D_SRCPAL_ADDR_CLRMASK (0xF0000007)
-#define PSB_2D_SRCPAL_ADDR_MASK (0x0FFFFFF8)
-#define PSB_2D_SRCPAL_BYTEALIGN (1024)
-
-/*
- * Pattern Palette (PSB_2D_PAT_PAL_BH)
- */
-
-#define PSB_2D_PATPAL_ADDR_SHIFT (0)
-#define PSB_2D_PATPAL_ADDR_CLRMASK (0xF0000007)
-#define PSB_2D_PATPAL_ADDR_MASK (0x0FFFFFF8)
-#define PSB_2D_PATPAL_BYTEALIGN (1024)
-
-/*
- * Rop3 Codes (2 LS bytes)
- */
-
-#define PSB_2D_ROP3_SRCCOPY (0xCCCC)
-#define PSB_2D_ROP3_PATCOPY (0xF0F0)
-#define PSB_2D_ROP3_WHITENESS (0xFFFF)
-#define PSB_2D_ROP3_BLACKNESS (0x0000)
-#define PSB_2D_ROP3_SRC (0xCC)
-#define PSB_2D_ROP3_PAT (0xF0)
-#define PSB_2D_ROP3_DST (0xAA)
-
-/*
- * Sizes.
- */
-
-#define PSB_SCENE_HW_COOKIE_SIZE 16
-#define PSB_TA_MEM_HW_COOKIE_SIZE 16
-
-/*
- * Scene stuff.
- */
-
-#define PSB_NUM_HW_SCENES 2
-
-/*
- * Scheduler completion actions.
- */
-
-#define PSB_RASTER_BLOCK 0
-#define PSB_RASTER 1
-#define PSB_RETURN 2
-#define PSB_TA 3
-
-/* Power management */
-#define PSB_PUNIT_PORT 0x04
-#define PSB_OSPMBA 0x78
-#define PSB_APMBA 0x7a
-#define PSB_APM_CMD 0x0
-#define PSB_APM_STS 0x04
-#define PSB_PWRGT_VID_ENC_MASK 0x30
-#define PSB_PWRGT_VID_DEC_MASK 0xc
-#define PSB_PWRGT_GL3_MASK 0xc0
-
-#define PSB_PM_SSC 0x20
-#define PSB_PM_SSS 0x30
-#define PSB_PWRGT_DISPLAY_MASK 0xc /*on a different BA than video/gfx*/
-#define MDFLD_PWRGT_DISPLAY_A_CNTR 0x0000000c
-#define MDFLD_PWRGT_DISPLAY_B_CNTR 0x0000c000
-#define MDFLD_PWRGT_DISPLAY_C_CNTR 0x00030000
-#define MDFLD_PWRGT_DISP_MIPI_CNTR 0x000c0000
-#define MDFLD_PWRGT_DISPLAY_CNTR (MDFLD_PWRGT_DISPLAY_A_CNTR | MDFLD_PWRGT_DISPLAY_B_CNTR | MDFLD_PWRGT_DISPLAY_C_CNTR | MDFLD_PWRGT_DISP_MIPI_CNTR) /* 0x000fc00c */
-/* Display SSS register bits are different in A0 vs. B0 */
-#define PSB_PWRGT_GFX_MASK 0x3
-#define MDFLD_PWRGT_DISPLAY_A_STS 0x000000c0
-#define MDFLD_PWRGT_DISPLAY_B_STS 0x00000300
-#define MDFLD_PWRGT_DISPLAY_C_STS 0x00000c00
-#define PSB_PWRGT_GFX_MASK_B0 0xc3
-#define MDFLD_PWRGT_DISPLAY_A_STS_B0 0x0000000c
-#define MDFLD_PWRGT_DISPLAY_B_STS_B0 0x0000c000
-#define MDFLD_PWRGT_DISPLAY_C_STS_B0 0x00030000
-#define MDFLD_PWRGT_DISP_MIPI_STS 0x000c0000
-#define MDFLD_PWRGT_DISPLAY_STS_A0 (MDFLD_PWRGT_DISPLAY_A_STS | MDFLD_PWRGT_DISPLAY_B_STS | MDFLD_PWRGT_DISPLAY_C_STS | MDFLD_PWRGT_DISP_MIPI_STS) /* 0x000fc00c */
-#define MDFLD_PWRGT_DISPLAY_STS_B0 (MDFLD_PWRGT_DISPLAY_A_STS_B0 | MDFLD_PWRGT_DISPLAY_B_STS_B0 | MDFLD_PWRGT_DISPLAY_C_STS_B0 | MDFLD_PWRGT_DISP_MIPI_STS) /* 0x000fc00c */
-#endif
omapdrm-y := omap_drv.o \
omap_debugfs.o \
omap_crtc.o \
+ omap_plane.o \
omap_encoder.o \
omap_connector.o \
omap_fb.o \
struct omap_crtc {
struct drm_crtc base;
- struct omap_overlay *ovl;
- struct omap_overlay_info info;
+ struct drm_plane *plane;
+ const char *name;
int id;
- /* if there is a pending flip, this will be non-null: */
+ /* if there is a pending flip, these will be non-null: */
struct drm_pending_vblank_event *event;
+ struct drm_framebuffer *old_fb;
};
-/* push changes down to dss2 */
-static int commit(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- struct omap_overlay *ovl = omap_crtc->ovl;
- struct omap_overlay_info *info = &omap_crtc->info;
- int ret;
-
- DBG("%s", omap_crtc->ovl->name);
- DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width,
- info->out_height, info->screen_width);
- DBG("%d,%d %08x", info->pos_x, info->pos_y, info->paddr);
-
- /* NOTE: do we want to do this at all here, or just wait
- * for dpms(ON) since other CRTC's may not have their mode
- * set yet, so fb dimensions may still change..
- */
- ret = ovl->set_overlay_info(ovl, info);
- if (ret) {
- dev_err(dev->dev, "could not set overlay info\n");
- return ret;
- }
-
- /* our encoder doesn't necessarily get a commit() after this, in
- * particular in the dpms() and mode_set_base() cases, so force the
- * manager to update:
- *
- * could this be in the encoder somehow?
- */
- if (ovl->manager) {
- ret = ovl->manager->apply(ovl->manager);
- if (ret) {
- dev_err(dev->dev, "could not apply settings\n");
- return ret;
- }
- }
-
- if (info->enabled) {
- omap_framebuffer_flush(crtc->fb, crtc->x, crtc->y,
- crtc->fb->width, crtc->fb->height);
- }
-
- return 0;
-}
-
-/* update parameters that are dependent on the framebuffer dimensions and
- * position within the fb that this crtc scans out from. This is called
- * when framebuffer dimensions or x,y base may have changed, either due
- * to our mode, or a change in another crtc that is scanning out of the
- * same fb.
- */
-static void update_scanout(struct drm_crtc *crtc)
-{
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- dma_addr_t paddr;
- unsigned int screen_width;
-
- omap_framebuffer_get_buffer(crtc->fb, crtc->x, crtc->y,
- NULL, &paddr, &screen_width);
-
- DBG("%s: %d,%d: %08x (%d)", omap_crtc->ovl->name,
- crtc->x, crtc->y, (u32)paddr, screen_width);
-
- omap_crtc->info.paddr = paddr;
- omap_crtc->info.screen_width = screen_width;
-}
-
static void omap_crtc_gamma_set(struct drm_crtc *crtc,
u16 *red, u16 *green, u16 *blue, uint32_t start, uint32_t size)
{
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- DBG("%s", omap_crtc->ovl->name);
+ /* not supported.. at least not yet */
}
static void omap_crtc_destroy(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- DBG("%s", omap_crtc->ovl->name);
+ omap_crtc->plane->funcs->destroy(omap_crtc->plane);
drm_crtc_cleanup(crtc);
kfree(omap_crtc);
}
static void omap_crtc_dpms(struct drm_crtc *crtc, int mode)
{
+ struct omap_drm_private *priv = crtc->dev->dev_private;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ int i;
- DBG("%s: %d", omap_crtc->ovl->name, mode);
+ WARN_ON(omap_plane_dpms(omap_crtc->plane, mode));
- if (mode == DRM_MODE_DPMS_ON) {
- update_scanout(crtc);
- omap_crtc->info.enabled = true;
- } else {
- omap_crtc->info.enabled = false;
+ for (i = 0; i < priv->num_planes; i++) {
+ struct drm_plane *plane = priv->planes[i];
+ if (plane->crtc == crtc)
+ WARN_ON(omap_plane_dpms(plane, mode));
}
-
- WARN_ON(commit(crtc));
}
static bool omap_crtc_mode_fixup(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
{
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- DBG("%s", omap_crtc->ovl->name);
return true;
}
static int omap_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct drm_plane *plane = omap_crtc->plane;
- DBG("%s: %d,%d: %dx%d", omap_crtc->ovl->name, x, y,
- mode->hdisplay, mode->vdisplay);
-
- /* just use adjusted mode */
- mode = adjusted_mode;
-
- omap_crtc->info.width = mode->hdisplay;
- omap_crtc->info.height = mode->vdisplay;
- omap_crtc->info.out_width = mode->hdisplay;
- omap_crtc->info.out_height = mode->vdisplay;
- omap_crtc->info.color_mode = OMAP_DSS_COLOR_RGB24U;
- omap_crtc->info.rotation_type = OMAP_DSS_ROT_DMA;
- omap_crtc->info.rotation = OMAP_DSS_ROT_0;
- omap_crtc->info.global_alpha = 0xff;
- omap_crtc->info.mirror = 0;
- omap_crtc->info.mirror = 0;
- omap_crtc->info.pos_x = 0;
- omap_crtc->info.pos_y = 0;
-#if 0 /* re-enable when these are available in DSS2 driver */
- omap_crtc->info.zorder = 3; /* GUI in the front, video behind */
- omap_crtc->info.min_x_decim = 1;
- omap_crtc->info.max_x_decim = 1;
- omap_crtc->info.min_y_decim = 1;
- omap_crtc->info.max_y_decim = 1;
-#endif
-
- update_scanout(crtc);
-
- return 0;
+ return omap_plane_mode_set(plane, crtc, crtc->fb,
+ 0, 0, mode->hdisplay, mode->vdisplay,
+ x << 16, y << 16,
+ mode->hdisplay << 16, mode->vdisplay << 16);
}
static void omap_crtc_prepare(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- struct omap_overlay *ovl = omap_crtc->ovl;
-
- DBG("%s", omap_crtc->ovl->name);
-
- ovl->get_overlay_info(ovl, &omap_crtc->info);
-
+ DBG("%s", omap_crtc->name);
omap_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
}
static void omap_crtc_commit(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- DBG("%s", omap_crtc->ovl->name);
+ DBG("%s", omap_crtc->name);
omap_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
}
static int omap_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
- struct drm_framebuffer *old_fb)
+ struct drm_framebuffer *old_fb)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct drm_plane *plane = omap_crtc->plane;
+ struct drm_display_mode *mode = &crtc->mode;
- DBG("%s %d,%d: fb=%p", omap_crtc->ovl->name, x, y, old_fb);
-
- update_scanout(crtc);
-
- return commit(crtc);
+ return plane->funcs->update_plane(plane, crtc, crtc->fb,
+ 0, 0, mode->hdisplay, mode->vdisplay,
+ x << 16, y << 16,
+ mode->hdisplay << 16, mode->vdisplay << 16);
}
static void omap_crtc_load_lut(struct drm_crtc *crtc)
{
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- DBG("%s", omap_crtc->ovl->name);
}
static void page_flip_cb(void *arg)
struct drm_device *dev = crtc->dev;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
struct drm_pending_vblank_event *event = omap_crtc->event;
+ struct drm_framebuffer *old_fb = omap_crtc->old_fb;
struct timeval now;
unsigned long flags;
WARN_ON(!event);
omap_crtc->event = NULL;
+ omap_crtc->old_fb = NULL;
- update_scanout(crtc);
- WARN_ON(commit(crtc));
+ omap_crtc_mode_set_base(crtc, crtc->x, crtc->y, old_fb);
/* wakeup userspace */
/* TODO: this should happen *after* flip in vsync IRQ handler */
return -EINVAL;
}
- crtc->fb = fb;
+ omap_crtc->old_fb = crtc->fb;
omap_crtc->event = event;
+ crtc->fb = fb;
- omap_gem_op_async(omap_framebuffer_bo(fb), OMAP_GEM_READ,
+ omap_gem_op_async(omap_framebuffer_bo(fb, 0), OMAP_GEM_READ,
page_flip_cb, crtc);
return 0;
.load_lut = omap_crtc_load_lut,
};
-struct omap_overlay *omap_crtc_get_overlay(struct drm_crtc *crtc)
-{
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- return omap_crtc->ovl;
-}
-
/* initialize crtc */
struct drm_crtc *omap_crtc_init(struct drm_device *dev,
struct omap_overlay *ovl, int id)
goto fail;
}
- omap_crtc->ovl = ovl;
- omap_crtc->id = id;
crtc = &omap_crtc->base;
+
+ omap_crtc->plane = omap_plane_init(dev, ovl, (1 << id), true);
+ omap_crtc->plane->crtc = crtc;
+ omap_crtc->name = ovl->name;
+ omap_crtc->id = id;
+
drm_crtc_init(dev, crtc, &omap_crtc_funcs);
drm_crtc_helper_add(crtc, &omap_crtc_helper_funcs);
struct omap_overlay_manager *mgr = NULL;
struct drm_crtc *crtc;
- if (ovl->manager) {
- DBG("disconnecting %s from %s", ovl->name,
- ovl->manager->name);
- ovl->unset_manager(ovl);
- }
-
/* find next best connector, ones with detected connection first
*/
while (*j < priv->num_connectors && !mgr) {
(*j)++;
}
- if (mgr) {
- DBG("connecting %s to %s", ovl->name, mgr->name);
- ovl->set_manager(ovl, mgr);
- }
-
crtc = omap_crtc_init(dev, ovl, priv->num_crtcs);
if (!crtc) {
return 0;
}
+static int create_plane(struct drm_device *dev, struct omap_overlay *ovl,
+ unsigned int possible_crtcs)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ struct drm_plane *plane =
+ omap_plane_init(dev, ovl, possible_crtcs, false);
+
+ if (!plane) {
+ dev_err(dev->dev, "could not create plane: %s\n",
+ ovl->name);
+ return -ENOMEM;
+ }
+
+ BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes));
+
+ priv->planes[priv->num_planes++] = plane;
+
+ return 0;
+}
+
static int match_dev_name(struct omap_dss_device *dssdev, void *data)
{
return !strcmp(dssdev->name, data);
omap_dss_get_overlay(kms_pdata->ovl_ids[i]);
create_crtc(dev, ovl, &j, connected_connectors);
}
+
+ for (i = 0; i < kms_pdata->pln_cnt; i++) {
+ struct omap_overlay *ovl =
+ omap_dss_get_overlay(kms_pdata->pln_ids[i]);
+ create_plane(dev, ovl, (1 << priv->num_crtcs) - 1);
+ }
} else {
/* otherwise just grab up to CONFIG_DRM_OMAP_NUM_CRTCS and try
* to make educated guesses about everything else
create_crtc(dev, omap_dss_get_overlay(i),
&j, connected_connectors);
}
+
+ /* use any remaining overlays as drm planes */
+ for (; i < omap_dss_get_num_overlays(); i++) {
+ struct omap_overlay *ovl = omap_dss_get_overlay(i);
+ create_plane(dev, ovl, (1 << priv->num_crtcs) - 1);
+ }
}
/* for now keep the mapping of CRTCs and encoders static.. */
struct omap_overlay_manager *mgr =
omap_encoder_get_manager(encoder);
- encoder->possible_crtcs = 0;
-
- for (j = 0; j < priv->num_crtcs; j++) {
- struct omap_overlay *ovl =
- omap_crtc_get_overlay(priv->crtcs[j]);
- if (ovl->manager == mgr) {
- encoder->possible_crtcs |= (1 << j);
- }
- }
+ encoder->possible_crtcs = (1 << priv->num_crtcs) - 1;
DBG("%s: possible_crtcs=%08x", mgr->name,
encoder->possible_crtcs);
dump_video_chains();
- dev->mode_config.min_width = 256;
- dev->mode_config.min_height = 256;
+ dev->mode_config.min_width = 32;
+ dev->mode_config.min_height = 32;
/* note: eventually will need some cpu_is_omapXYZ() type stuff here
* to fill in these limits properly on different OMAP generations..
.close = drm_gem_vm_close,
};
+static const struct file_operations omapdriver_fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .unlocked_ioctl = drm_ioctl,
+ .release = drm_release,
+ .mmap = omap_gem_mmap,
+ .poll = drm_poll,
+ .fasync = drm_fasync,
+ .read = drm_read,
+ .llseek = noop_llseek,
+};
+
static struct drm_driver omap_drm_driver = {
.driver_features =
DRIVER_HAVE_IRQ | DRIVER_MODESET | DRIVER_GEM,
.dumb_destroy = omap_gem_dumb_destroy,
.ioctls = ioctls,
.num_ioctls = DRM_OMAP_NUM_IOCTLS,
- .fops = {
- .owner = THIS_MODULE,
- .open = drm_open,
- .unlocked_ioctl = drm_ioctl,
- .release = drm_release,
- .mmap = omap_gem_mmap,
- .poll = drm_poll,
- .fasync = drm_fasync,
- .read = drm_read,
- .llseek = noop_llseek,
- },
+ .fops = &omapdriver_fops,
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = DRIVER_DATE,
#include <linux/module.h>
#include <linux/types.h>
#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
#include "omap_drm.h"
#include "omap_priv.h"
struct omap_drm_private {
unsigned int num_crtcs;
struct drm_crtc *crtcs[8];
+ unsigned int num_planes;
+ struct drm_plane *planes[8];
unsigned int num_encoders;
struct drm_encoder *encoders[8];
unsigned int num_connectors;
struct drm_crtc *omap_crtc_init(struct drm_device *dev,
struct omap_overlay *ovl, int id);
-struct omap_overlay *omap_crtc_get_overlay(struct drm_crtc *crtc);
+
+struct drm_plane *omap_plane_init(struct drm_device *dev,
+ struct omap_overlay *ovl, unsigned int possible_crtcs,
+ bool priv);
+int omap_plane_dpms(struct drm_plane *plane, int mode);
+int omap_plane_mode_set(struct drm_plane *plane,
+ struct drm_crtc *crtc, struct drm_framebuffer *fb,
+ int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h);
struct drm_encoder *omap_encoder_init(struct drm_device *dev,
struct omap_overlay_manager *mgr);
int x, int y, int w, int h);
struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev,
- struct drm_file *file, struct drm_mode_fb_cmd *mode_cmd);
+ struct drm_file *file, struct drm_mode_fb_cmd2 *mode_cmd);
struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev,
- struct drm_mode_fb_cmd *mode_cmd, struct drm_gem_object *bo);
-struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb);
-int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y,
- void **vaddr, dma_addr_t *paddr, unsigned int *screen_width);
+ struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **bos);
+struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb, int p);
+int omap_framebuffer_pin(struct drm_framebuffer *fb);
+void omap_framebuffer_unpin(struct drm_framebuffer *fb);
+void omap_framebuffer_update_scanout(struct drm_framebuffer *fb, int x, int y,
+ struct omap_overlay_info *info);
struct drm_connector *omap_framebuffer_get_next_connector(
struct drm_framebuffer *fb, struct drm_connector *from);
void omap_framebuffer_flush(struct drm_framebuffer *fb,
return ALIGN(pitch, 8 * bytespp);
}
+/* should these be made into common util helpers?
+ */
+
+static inline int objects_lookup(struct drm_device *dev,
+ struct drm_file *filp, uint32_t pixel_format,
+ struct drm_gem_object **bos, uint32_t *handles)
+{
+ int i, n = drm_format_num_planes(pixel_format);
+
+ for (i = 0; i < n; i++) {
+ bos[i] = drm_gem_object_lookup(dev, filp, handles[i]);
+ if (!bos[i]) {
+ goto fail;
+ }
+ }
+
+ return 0;
+
+fail:
+ while (--i > 0) {
+ drm_gem_object_unreference_unlocked(bos[i]);
+ }
+ return -ENOENT;
+}
+
#endif /* __OMAP_DRV_H__ */
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
-
/*
* framebuffer funcs
*/
+/* per-format info: */
+struct format {
+ enum omap_color_mode dss_format;
+ uint32_t pixel_format;
+ struct {
+ int stride_bpp; /* this times width is stride */
+ int sub_y; /* sub-sample in y dimension */
+ } planes[4];
+ bool yuv;
+};
+
+static const struct format formats[] = {
+ /* 16bpp [A]RGB: */
+ { OMAP_DSS_COLOR_RGB16, DRM_FORMAT_RGB565, {{2, 1}}, false }, /* RGB16-565 */
+ { OMAP_DSS_COLOR_RGB12U, DRM_FORMAT_RGBX4444, {{2, 1}}, false }, /* RGB12x-4444 */
+ { OMAP_DSS_COLOR_RGBX16, DRM_FORMAT_XRGB4444, {{2, 1}}, false }, /* xRGB12-4444 */
+ { OMAP_DSS_COLOR_RGBA16, DRM_FORMAT_RGBA4444, {{2, 1}}, false }, /* RGBA12-4444 */
+ { OMAP_DSS_COLOR_ARGB16, DRM_FORMAT_ARGB4444, {{2, 1}}, false }, /* ARGB16-4444 */
+ { OMAP_DSS_COLOR_XRGB16_1555, DRM_FORMAT_XRGB1555, {{2, 1}}, false }, /* xRGB15-1555 */
+ { OMAP_DSS_COLOR_ARGB16_1555, DRM_FORMAT_ARGB1555, {{2, 1}}, false }, /* ARGB16-1555 */
+ /* 24bpp RGB: */
+ { OMAP_DSS_COLOR_RGB24P, DRM_FORMAT_RGB888, {{3, 1}}, false }, /* RGB24-888 */
+ /* 32bpp [A]RGB: */
+ { OMAP_DSS_COLOR_RGBX32, DRM_FORMAT_RGBX8888, {{4, 1}}, false }, /* RGBx24-8888 */
+ { OMAP_DSS_COLOR_RGB24U, DRM_FORMAT_XRGB8888, {{4, 1}}, false }, /* xRGB24-8888 */
+ { OMAP_DSS_COLOR_RGBA32, DRM_FORMAT_RGBA8888, {{4, 1}}, false }, /* RGBA32-8888 */
+ { OMAP_DSS_COLOR_ARGB32, DRM_FORMAT_ARGB8888, {{4, 1}}, false }, /* ARGB32-8888 */
+ /* YUV: */
+ { OMAP_DSS_COLOR_NV12, DRM_FORMAT_NV12, {{1, 1}, {1, 2}}, true },
+ { OMAP_DSS_COLOR_YUV2, DRM_FORMAT_YUYV, {{2, 1}}, true },
+ { OMAP_DSS_COLOR_UYVY, DRM_FORMAT_UYVY, {{2, 1}}, true },
+};
+
+/* per-plane info for the fb: */
+struct plane {
+ struct drm_gem_object *bo;
+ uint32_t pitch;
+ uint32_t offset;
+ dma_addr_t paddr;
+};
+
#define to_omap_framebuffer(x) container_of(x, struct omap_framebuffer, base)
struct omap_framebuffer {
struct drm_framebuffer base;
- struct drm_gem_object *bo;
- int size;
- dma_addr_t paddr;
+ const struct format *format;
+ struct plane planes[4];
};
static int omap_framebuffer_create_handle(struct drm_framebuffer *fb,
unsigned int *handle)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
- return drm_gem_handle_create(file_priv, omap_fb->bo, handle);
+ return drm_gem_handle_create(file_priv,
+ omap_fb->planes[0].bo, handle);
}
static void omap_framebuffer_destroy(struct drm_framebuffer *fb)
{
- struct drm_device *dev = fb->dev;
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+ int i, n = drm_format_num_planes(omap_fb->format->pixel_format);
DBG("destroy: FB ID: %d (%p)", fb->base.id, fb);
drm_framebuffer_cleanup(fb);
- if (omap_fb->bo) {
- if (omap_fb->paddr && omap_gem_put_paddr(omap_fb->bo))
- dev_err(dev->dev, "could not unmap!\n");
- drm_gem_object_unreference_unlocked(omap_fb->bo);
+ for (i = 0; i < n; i++) {
+ struct plane *plane = &omap_fb->planes[i];
+ if (plane->bo)
+ drm_gem_object_unreference_unlocked(plane->bo);
}
kfree(omap_fb);
.dirty = omap_framebuffer_dirty,
};
-/* returns the buffer size */
-int omap_framebuffer_get_buffer(struct drm_framebuffer *fb, int x, int y,
- void **vaddr, dma_addr_t *paddr, unsigned int *screen_width)
+/* pins buffer in preparation for scanout */
+int omap_framebuffer_pin(struct drm_framebuffer *fb)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
- int bpp = fb->bits_per_pixel / 8;
- unsigned long offset;
+ int ret, i, n = drm_format_num_planes(omap_fb->format->pixel_format);
- offset = (x * bpp) + (y * fb->pitch);
+ for (i = 0; i < n; i++) {
+ struct plane *plane = &omap_fb->planes[i];
+ ret = omap_gem_get_paddr(plane->bo, &plane->paddr, true);
+ if (ret)
+ goto fail;
+ }
- if (vaddr) {
- void *bo_vaddr = omap_gem_vaddr(omap_fb->bo);
- /* note: we can only count on having a vaddr for buffers that
- * are allocated physically contiguously to begin with (ie.
- * dma_alloc_coherent()). But this should be ok because it
- * is only used by legacy fbdev
- */
- BUG_ON(IS_ERR_OR_NULL(bo_vaddr));
- *vaddr = bo_vaddr + offset;
+ return 0;
+
+fail:
+ while (--i > 0) {
+ struct plane *plane = &omap_fb->planes[i];
+ omap_gem_put_paddr(plane->bo);
}
+ return ret;
+}
- *paddr = omap_fb->paddr + offset;
- *screen_width = fb->pitch / bpp;
+/* releases buffer when done with scanout */
+void omap_framebuffer_unpin(struct drm_framebuffer *fb)
+{
+ struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+ int i, n = drm_format_num_planes(omap_fb->format->pixel_format);
- return omap_fb->size - offset;
+ for (i = 0; i < n; i++) {
+ struct plane *plane = &omap_fb->planes[i];
+ omap_gem_put_paddr(plane->bo);
+ }
}
-struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb)
+/* update ovl info for scanout, handles cases of multi-planar fb's, etc.
+ */
+void omap_framebuffer_update_scanout(struct drm_framebuffer *fb, int x, int y,
+ struct omap_overlay_info *info)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
- return omap_fb->bo;
+ const struct format *format = omap_fb->format;
+ struct plane *plane = &omap_fb->planes[0];
+ unsigned int offset;
+
+ offset = plane->offset +
+ (x * format->planes[0].stride_bpp) +
+ (y * plane->pitch / format->planes[0].sub_y);
+
+ info->color_mode = format->dss_format;
+ info->paddr = plane->paddr + offset;
+ info->screen_width = plane->pitch / format->planes[0].stride_bpp;
+
+ if (format->dss_format == OMAP_DSS_COLOR_NV12) {
+ plane = &omap_fb->planes[1];
+ offset = plane->offset +
+ (x * format->planes[1].stride_bpp) +
+ (y * plane->pitch / format->planes[1].sub_y);
+ info->p_uv_addr = plane->paddr + offset;
+ } else {
+ info->p_uv_addr = 0;
+ }
+}
+
+struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb, int p)
+{
+ struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+ if (p >= drm_format_num_planes(omap_fb->format->pixel_format))
+ return NULL;
+ return omap_fb->planes[p].bo;
}
/* iterate thru all the connectors, returning ones that are attached
}
struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev,
- struct drm_file *file, struct drm_mode_fb_cmd *mode_cmd)
+ struct drm_file *file, struct drm_mode_fb_cmd2 *mode_cmd)
{
- struct drm_gem_object *bo;
+ struct drm_gem_object *bos[4];
struct drm_framebuffer *fb;
- bo = drm_gem_object_lookup(dev, file, mode_cmd->handle);
- if (!bo) {
- return ERR_PTR(-ENOENT);
- }
- fb = omap_framebuffer_init(dev, mode_cmd, bo);
- if (!fb) {
- return ERR_PTR(-ENOMEM);
+ int ret;
+
+ ret = objects_lookup(dev, file, mode_cmd->pixel_format,
+ bos, mode_cmd->handles);
+ if (ret)
+ return ERR_PTR(ret);
+
+ fb = omap_framebuffer_init(dev, mode_cmd, bos);
+ if (IS_ERR(fb)) {
+ int i, n = drm_format_num_planes(mode_cmd->pixel_format);
+ for (i = 0; i < n; i++)
+ drm_gem_object_unreference_unlocked(bos[i]);
+ return fb;
}
return fb;
}
struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev,
- struct drm_mode_fb_cmd *mode_cmd, struct drm_gem_object *bo)
+ struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **bos)
{
struct omap_framebuffer *omap_fb;
struct drm_framebuffer *fb = NULL;
- int size, ret;
+ const struct format *format = NULL;
+ int ret, i, n = drm_format_num_planes(mode_cmd->pixel_format);
- DBG("create framebuffer: dev=%p, mode_cmd=%p (%dx%d@%d)",
+ DBG("create framebuffer: dev=%p, mode_cmd=%p (%dx%d@%4.4s)",
dev, mode_cmd, mode_cmd->width, mode_cmd->height,
- mode_cmd->bpp);
+ (char *)&mode_cmd->pixel_format);
+
+ for (i = 0; i < ARRAY_SIZE(formats); i++) {
+ if (formats[i].pixel_format == mode_cmd->pixel_format) {
+ format = &formats[i];
+ break;
+ }
+ }
- /* in case someone tries to feed us a completely bogus stride: */
- mode_cmd->pitch = align_pitch(mode_cmd->pitch,
- mode_cmd->width, mode_cmd->bpp);
+ if (!format) {
+ dev_err(dev->dev, "unsupported pixel format: %4.4s\n",
+ (char *)&mode_cmd->pixel_format);
+ ret = -EINVAL;
+ goto fail;
+ }
omap_fb = kzalloc(sizeof(*omap_fb), GFP_KERNEL);
if (!omap_fb) {
dev_err(dev->dev, "could not allocate fb\n");
+ ret = -ENOMEM;
goto fail;
}
DBG("create: FB ID: %d (%p)", fb->base.id, fb);
- size = PAGE_ALIGN(mode_cmd->pitch * mode_cmd->height);
+ omap_fb->format = format;
- if (size > bo->size) {
- dev_err(dev->dev, "provided buffer object is too small!\n");
- goto fail;
- }
+ for (i = 0; i < n; i++) {
+ struct plane *plane = &omap_fb->planes[i];
+ int size, pitch = mode_cmd->pitches[i];
+
+ if (pitch < (mode_cmd->width * format->planes[i].stride_bpp)) {
+ dev_err(dev->dev, "provided buffer pitch is too small! %d < %d\n",
+ pitch, mode_cmd->width * format->planes[i].stride_bpp);
+ ret = -EINVAL;
+ goto fail;
+ }
- omap_fb->bo = bo;
- omap_fb->size = size;
+ size = pitch * mode_cmd->height / format->planes[i].sub_y;
- if (omap_gem_get_paddr(bo, &omap_fb->paddr, true)) {
- dev_err(dev->dev, "could not map (paddr)!\n");
- goto fail;
+ if (size > (bos[i]->size - mode_cmd->offsets[i])) {
+ dev_err(dev->dev, "provided buffer object is too small! %d < %d\n",
+ bos[i]->size - mode_cmd->offsets[i], size);
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ plane->bo = bos[i];
+ plane->offset = mode_cmd->offsets[i];
+ plane->pitch = mode_cmd->pitches[i];
+ plane->paddr = pitch;
}
drm_helper_mode_fill_fb_struct(fb, mode_cmd);
if (fb) {
omap_framebuffer_destroy(fb);
}
- return NULL;
+ return ERR_PTR(ret);
}
struct drm_framebuffer *fb = NULL;
union omap_gem_size gsize;
struct fb_info *fbi = NULL;
- struct drm_mode_fb_cmd mode_cmd = {0};
+ struct drm_mode_fb_cmd2 mode_cmd = {0};
dma_addr_t paddr;
- void __iomem *vaddr;
- int size, screen_width;
int ret;
/* only doing ARGB32 since this is what is needed to alpha-blend
sizes->surface_height, sizes->surface_bpp,
sizes->fb_width, sizes->fb_height);
+ mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
+ sizes->surface_depth);
+
mode_cmd.width = sizes->surface_width;
mode_cmd.height = sizes->surface_height;
- mode_cmd.bpp = sizes->surface_bpp;
- mode_cmd.depth = sizes->surface_depth;
-
- mode_cmd.pitch = align_pitch(
- mode_cmd.width * ((mode_cmd.bpp + 7) / 8),
- mode_cmd.width, mode_cmd.bpp);
+ mode_cmd.pitches[0] = align_pitch(
+ mode_cmd.width * ((sizes->surface_bpp + 7) / 8),
+ mode_cmd.width, sizes->surface_bpp);
fbdev->ywrap_enabled = priv->has_dmm && ywrap_enabled;
if (fbdev->ywrap_enabled) {
/* need to align pitch to page size if using DMM scrolling */
- mode_cmd.pitch = ALIGN(mode_cmd.pitch, PAGE_SIZE);
+ mode_cmd.pitches[0] = ALIGN(mode_cmd.pitches[0], PAGE_SIZE);
}
/* allocate backing bo */
gsize = (union omap_gem_size){
- .bytes = PAGE_ALIGN(mode_cmd.pitch * mode_cmd.height),
+ .bytes = PAGE_ALIGN(mode_cmd.pitches[0] * mode_cmd.height),
};
DBG("allocating %d bytes for fb %d", gsize.bytes, dev->primary->index);
fbdev->bo = omap_gem_new(dev, gsize, OMAP_BO_SCANOUT | OMAP_BO_WC);
if (!fbdev->bo) {
dev_err(dev->dev, "failed to allocate buffer object\n");
+ ret = -ENOMEM;
goto fail;
}
- fb = omap_framebuffer_init(dev, &mode_cmd, fbdev->bo);
- if (!fb) {
+ fb = omap_framebuffer_init(dev, &mode_cmd, &fbdev->bo);
+ if (IS_ERR(fb)) {
dev_err(dev->dev, "failed to allocate fb\n");
+ /* note: if fb creation failed, we can't rely on fb destroy
+ * to unref the bo:
+ */
+ drm_gem_object_unreference(fbdev->bo);
+ ret = PTR_ERR(fb);
+ goto fail;
+ }
+
+ /* note: this keeps the bo pinned.. which is perhaps not ideal,
+ * but is needed as long as we use fb_mmap() to mmap to userspace
+ * (since this happens using fix.smem_start). Possibly we could
+ * implement our own mmap using GEM mmap support to avoid this
+ * (non-tiled buffer doesn't need to be pinned for fbcon to write
+ * to it). Then we just need to be sure that we are able to re-
+ * pin it in case of an opps.
+ */
+ ret = omap_gem_get_paddr(fbdev->bo, &paddr, true);
+ if (ret) {
+ dev_err(dev->dev, "could not map (paddr)!\n");
ret = -ENOMEM;
goto fail;
}
goto fail_unlock;
}
- drm_fb_helper_fill_fix(fbi, fb->pitch, fb->depth);
+ drm_fb_helper_fill_fix(fbi, fb->pitches[0], fb->depth);
drm_fb_helper_fill_var(fbi, helper, sizes->fb_width, sizes->fb_height);
- size = omap_framebuffer_get_buffer(fb, 0, 0,
- &vaddr, &paddr, &screen_width);
-
dev->mode_config.fb_base = paddr;
- fbi->screen_base = vaddr;
- fbi->screen_size = size;
+ fbi->screen_base = omap_gem_vaddr(fbdev->bo);
+ fbi->screen_size = fbdev->bo->size;
fbi->fix.smem_start = paddr;
- fbi->fix.smem_len = size;
+ fbi->fix.smem_len = fbdev->bo->size;
/* if we have DMM, then we can use it for scrolling by just
* shuffling pages around in DMM rather than doing sw blit.
fbdev = to_omap_fbdev(priv->fbdev);
- kfree(fbdev);
-
/* this will free the backing object */
if (fbdev->fb)
fbdev->fb->funcs->destroy(fbdev->fb);
+ kfree(fbdev);
+
priv->fbdev = NULL;
}
} *sync;
};
+static int get_pages(struct drm_gem_object *obj, struct page ***pages);
+static uint64_t mmap_offset(struct drm_gem_object *obj);
+
/* To deal with userspace mmap'ings of 2d tiled buffers, which (a) are
* not necessarily pinned in TILER all the time, and (b) when they are
* they are not necessarily page aligned, we reserve one or more small
{
if (obj->dev->dev_mapping) {
size_t size = PAGE_SIZE * usergart[fmt].height;
- loff_t off = omap_gem_mmap_offset(obj) +
+ loff_t off = mmap_offset(obj) +
(entry->obj_pgoff << PAGE_SHIFT);
unmap_mapping_range(obj->dev->dev_mapping, off, size, 1);
}
return obj->filp != NULL;
}
-static int get_pages(struct drm_gem_object *obj, struct page ***pages);
-
static DEFINE_SPINLOCK(sync_lock);
/** ensure backing pages are allocated */
}
/** get mmap offset */
-uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj)
+static uint64_t mmap_offset(struct drm_gem_object *obj)
{
if (!obj->map_list.map) {
/* Make it mmapable */
return (uint64_t)obj->map_list.hash.key << PAGE_SHIFT;
}
+uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj)
+{
+ uint64_t offset;
+ mutex_lock(&obj->dev->struct_mutex);
+ offset = mmap_offset(obj);
+ mutex_unlock(&obj->dev->struct_mutex);
+ return offset;
+}
+
/** get mmap size */
size_t omap_gem_mmap_size(struct drm_gem_object *obj)
{
drm_gem_free_mmap_offset(obj);
}
+ /* this means the object is still pinned.. which really should
+ * not happen. I think..
+ */
+ WARN_ON(omap_obj->paddr_cnt > 0);
+
/* don't free externally allocated backing memory */
if (!(omap_obj->flags & OMAP_BO_EXT_MEM)) {
if (omap_obj->pages) {
--- /dev/null
+/*
+ * drivers/staging/omapdrm/omap_plane.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+/* some hackery because omapdss has an 'enum omap_plane' (which would be
+ * better named omap_plane_id).. and compiler seems unhappy about having
+ * both a 'struct omap_plane' and 'enum omap_plane'
+ */
+#define omap_plane _omap_plane
+
+/*
+ * plane funcs
+ */
+
+#define to_omap_plane(x) container_of(x, struct omap_plane, base)
+
+struct omap_plane {
+ struct drm_plane base;
+ struct omap_overlay *ovl;
+ struct omap_overlay_info info;
+
+ /* Source values, converted to integers because we don't support
+ * fractional positions:
+ */
+ unsigned int src_x, src_y;
+
+ /* last fb that we pinned: */
+ struct drm_framebuffer *pinned_fb;
+};
+
+
+/* push changes down to dss2 */
+static int commit(struct drm_plane *plane)
+{
+ struct drm_device *dev = plane->dev;
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+ struct omap_overlay *ovl = omap_plane->ovl;
+ struct omap_overlay_info *info = &omap_plane->info;
+ int ret;
+
+ DBG("%s", ovl->name);
+ DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width,
+ info->out_height, info->screen_width);
+ DBG("%d,%d %08x %08x", info->pos_x, info->pos_y,
+ info->paddr, info->p_uv_addr);
+
+ /* NOTE: do we want to do this at all here, or just wait
+ * for dpms(ON) since other CRTC's may not have their mode
+ * set yet, so fb dimensions may still change..
+ */
+ ret = ovl->set_overlay_info(ovl, info);
+ if (ret) {
+ dev_err(dev->dev, "could not set overlay info\n");
+ return ret;
+ }
+
+ /* our encoder doesn't necessarily get a commit() after this, in
+ * particular in the dpms() and mode_set_base() cases, so force the
+ * manager to update:
+ *
+ * could this be in the encoder somehow?
+ */
+ if (ovl->manager) {
+ ret = ovl->manager->apply(ovl->manager);
+ if (ret) {
+ dev_err(dev->dev, "could not apply settings\n");
+ return ret;
+ }
+ }
+
+ if (ovl->is_enabled(ovl)) {
+ omap_framebuffer_flush(plane->fb, info->pos_x, info->pos_y,
+ info->out_width, info->out_height);
+ }
+
+ return 0;
+}
+
+/* when CRTC that we are attached to has potentially changed, this checks
+ * if we are attached to proper manager, and if necessary updates.
+ */
+static void update_manager(struct drm_plane *plane)
+{
+ struct omap_drm_private *priv = plane->dev->dev_private;
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+ struct omap_overlay *ovl = omap_plane->ovl;
+ struct omap_overlay_manager *mgr = NULL;
+ int i;
+
+ if (plane->crtc) {
+ for (i = 0; i < priv->num_encoders; i++) {
+ struct drm_encoder *encoder = priv->encoders[i];
+ if (encoder->crtc == plane->crtc) {
+ mgr = omap_encoder_get_manager(encoder);
+ break;
+ }
+ }
+ }
+
+ if (ovl->manager != mgr) {
+ bool enabled = ovl->is_enabled(ovl);
+
+ /* don't switch things around with enabled overlays: */
+ if (enabled)
+ omap_plane_dpms(plane, DRM_MODE_DPMS_OFF);
+
+ if (ovl->manager) {
+ DBG("disconnecting %s from %s", ovl->name,
+ ovl->manager->name);
+ ovl->unset_manager(ovl);
+ }
+
+ if (mgr) {
+ DBG("connecting %s to %s", ovl->name, mgr->name);
+ ovl->set_manager(ovl, mgr);
+ }
+
+ if (enabled && mgr)
+ omap_plane_dpms(plane, DRM_MODE_DPMS_ON);
+ }
+}
+
+/* update which fb (if any) is pinned for scanout */
+static int update_pin(struct drm_plane *plane, struct drm_framebuffer *fb)
+{
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+ int ret = 0;
+
+ if (omap_plane->pinned_fb != fb) {
+ if (omap_plane->pinned_fb)
+ omap_framebuffer_unpin(omap_plane->pinned_fb);
+ omap_plane->pinned_fb = fb;
+ if (fb)
+ ret = omap_framebuffer_pin(fb);
+ }
+
+ return ret;
+}
+
+/* update parameters that are dependent on the framebuffer dimensions and
+ * position within the fb that this plane scans out from. This is called
+ * when framebuffer or x,y base may have changed.
+ */
+static void update_scanout(struct drm_plane *plane)
+{
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+ struct omap_overlay_info *info = &omap_plane->info;
+ int ret;
+
+ ret = update_pin(plane, plane->fb);
+ if (ret) {
+ dev_err(plane->dev->dev,
+ "could not pin fb: %d\n", ret);
+ omap_plane_dpms(plane, DRM_MODE_DPMS_OFF);
+ return;
+ }
+
+ omap_framebuffer_update_scanout(plane->fb,
+ omap_plane->src_x, omap_plane->src_y, info);
+
+ DBG("%s: %d,%d: %08x %08x (%d)", omap_plane->ovl->name,
+ omap_plane->src_x, omap_plane->src_y,
+ (u32)info->paddr, (u32)info->p_uv_addr,
+ info->screen_width);
+}
+
+int omap_plane_mode_set(struct drm_plane *plane,
+ struct drm_crtc *crtc, struct drm_framebuffer *fb,
+ int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
+{
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+
+ /* src values are in Q16 fixed point, convert to integer: */
+ src_x = src_x >> 16;
+ src_y = src_y >> 16;
+ src_w = src_w >> 16;
+ src_h = src_h >> 16;
+
+ omap_plane->info.pos_x = crtc_x;
+ omap_plane->info.pos_y = crtc_y;
+ omap_plane->info.out_width = crtc_w;
+ omap_plane->info.out_height = crtc_h;
+ omap_plane->info.width = src_w;
+ omap_plane->info.height = src_h;
+ omap_plane->src_x = src_x;
+ omap_plane->src_y = src_y;
+
+ /* note: this is done after this fxn returns.. but if we need
+ * to do a commit/update_scanout, etc before this returns we
+ * need the current value.
+ */
+ plane->fb = fb;
+ plane->crtc = crtc;
+
+ update_scanout(plane);
+ update_manager(plane);
+
+ return 0;
+}
+
+static int omap_plane_update(struct drm_plane *plane,
+ struct drm_crtc *crtc, struct drm_framebuffer *fb,
+ int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
+{
+ omap_plane_mode_set(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h,
+ src_x, src_y, src_w, src_h);
+ return omap_plane_dpms(plane, DRM_MODE_DPMS_ON);
+}
+
+static int omap_plane_disable(struct drm_plane *plane)
+{
+ return omap_plane_dpms(plane, DRM_MODE_DPMS_OFF);
+}
+
+static void omap_plane_destroy(struct drm_plane *plane)
+{
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+ DBG("%s", omap_plane->ovl->name);
+ omap_plane_disable(plane);
+ drm_plane_cleanup(plane);
+ kfree(omap_plane);
+}
+
+int omap_plane_dpms(struct drm_plane *plane, int mode)
+{
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+ struct omap_overlay *ovl = omap_plane->ovl;
+ int r;
+
+ DBG("%s: %d", omap_plane->ovl->name, mode);
+
+ if (mode == DRM_MODE_DPMS_ON) {
+ update_scanout(plane);
+ r = commit(plane);
+ if (!r)
+ r = ovl->enable(ovl);
+ } else {
+ r = ovl->disable(ovl);
+ update_pin(plane, NULL);
+ }
+
+ return r;
+}
+
+static const struct drm_plane_funcs omap_plane_funcs = {
+ .update_plane = omap_plane_update,
+ .disable_plane = omap_plane_disable,
+ .destroy = omap_plane_destroy,
+};
+
+static const uint32_t formats[] = {
+ DRM_FORMAT_RGB565,
+ DRM_FORMAT_RGBX4444,
+ DRM_FORMAT_XRGB4444,
+ DRM_FORMAT_RGBA4444,
+ DRM_FORMAT_ABGR4444,
+ DRM_FORMAT_XRGB1555,
+ DRM_FORMAT_ARGB1555,
+ DRM_FORMAT_RGB888,
+ DRM_FORMAT_RGBX8888,
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_RGBA8888,
+ DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_NV12,
+ DRM_FORMAT_YUYV,
+ DRM_FORMAT_UYVY,
+};
+
+/* initialize plane */
+struct drm_plane *omap_plane_init(struct drm_device *dev,
+ struct omap_overlay *ovl, unsigned int possible_crtcs,
+ bool priv)
+{
+ struct drm_plane *plane = NULL;
+ struct omap_plane *omap_plane;
+
+ DBG("%s: possible_crtcs=%08x, priv=%d", ovl->name,
+ possible_crtcs, priv);
+
+ omap_plane = kzalloc(sizeof(*omap_plane), GFP_KERNEL);
+ if (!omap_plane) {
+ dev_err(dev->dev, "could not allocate plane\n");
+ goto fail;
+ }
+
+ omap_plane->ovl = ovl;
+ plane = &omap_plane->base;
+
+ drm_plane_init(dev, plane, possible_crtcs, &omap_plane_funcs,
+ formats, ARRAY_SIZE(formats), priv);
+
+ /* get our starting configuration, set defaults for parameters
+ * we don't currently use, etc:
+ */
+ ovl->get_overlay_info(ovl, &omap_plane->info);
+ omap_plane->info.rotation_type = OMAP_DSS_ROT_DMA;
+ omap_plane->info.rotation = OMAP_DSS_ROT_0;
+ omap_plane->info.global_alpha = 0xff;
+ omap_plane->info.mirror = 0;
+ omap_plane->info.mirror = 0;
+
+ /* Set defaults depending on whether we are a CRTC or overlay
+ * layer.
+ * TODO add ioctl to give userspace an API to change this.. this
+ * will come in a subsequent patch.
+ */
+ if (priv)
+ omap_plane->info.zorder = 0;
+ else
+ omap_plane->info.zorder = 1;
+
+ update_manager(plane);
+
+ return plane;
+
+fail:
+ if (plane) {
+ omap_plane_destroy(plane);
+ }
+ return NULL;
+}
* pipes/overlays/CRTCs are used.. if this is not provided, then instead the
* first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to
* one manager, with priority given to managers that are connected to
- * detected devices. This should be a good default behavior for most cases,
- * but yet there still might be times when you wish to do something different.
+ * detected devices. Remaining overlays are used as video planes. This
+ * should be a good default behavior for most cases, but yet there still
+ * might be times when you wish to do something different.
*/
struct omap_kms_platform_data {
+ /* overlays to use as CRTCs: */
int ovl_cnt;
const int *ovl_ids;
+
+ /* overlays to use as video planes: */
+ int pln_cnt;
+ const int *pln_ids;
+
int mgr_cnt;
const int *mgr_ids;
+
int dev_cnt;
const char **dev_names;
};
+++ /dev/null
-config POHMELFS
- tristate "POHMELFS filesystem support"
- depends on NET
- select CONNECTOR
- select CRYPTO
- select CRYPTO_BLKCIPHER
- select CRYPTO_HMAC
- help
- POHMELFS stands for Parallel Optimized Host Message Exchange Layered
- File System. This is a network filesystem which supports coherent
- caching of data and metadata on clients.
-
-config POHMELFS_DEBUG
- bool "POHMELFS debugging"
- depends on POHMELFS
- default n
- help
- Turns on excessive POHMELFS debugging facilities.
- You usually do not want to slow things down noticeably and get really
- lots of kernel messages in syslog.
+++ /dev/null
-obj-$(CONFIG_POHMELFS) += pohmelfs.o
-
-pohmelfs-y := inode.o config.o dir.o net.o path_entry.o trans.o crypto.o lock.o mcache.o
+++ /dev/null
-/*
- * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/connector.h>
-#include <linux/crypto.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-
-#include "netfs.h"
-
-/*
- * Global configuration list.
- * Each client can be asked to get one of them.
- *
- * Allows to provide remote server address (ipv4/v6/whatever), port
- * and so on via kernel connector.
- */
-
-static struct cb_id pohmelfs_cn_id = {.idx = POHMELFS_CN_IDX, .val = POHMELFS_CN_VAL};
-static LIST_HEAD(pohmelfs_config_list);
-static DEFINE_MUTEX(pohmelfs_config_lock);
-
-static inline int pohmelfs_config_eql(struct pohmelfs_ctl *sc, struct pohmelfs_ctl *ctl)
-{
- if (sc->idx == ctl->idx && sc->type == ctl->type &&
- sc->proto == ctl->proto &&
- sc->addrlen == ctl->addrlen &&
- !memcmp(&sc->addr, &ctl->addr, ctl->addrlen))
- return 1;
-
- return 0;
-}
-
-static struct pohmelfs_config_group *pohmelfs_find_config_group(unsigned int idx)
-{
- struct pohmelfs_config_group *g, *group = NULL;
-
- list_for_each_entry(g, &pohmelfs_config_list, group_entry) {
- if (g->idx == idx) {
- group = g;
- break;
- }
- }
-
- return group;
-}
-
-static struct pohmelfs_config_group *pohmelfs_find_create_config_group(unsigned int idx)
-{
- struct pohmelfs_config_group *g;
-
- g = pohmelfs_find_config_group(idx);
- if (g)
- return g;
-
- g = kzalloc(sizeof(struct pohmelfs_config_group), GFP_KERNEL);
- if (!g)
- return NULL;
-
- INIT_LIST_HEAD(&g->config_list);
- g->idx = idx;
- g->num_entry = 0;
-
- list_add_tail(&g->group_entry, &pohmelfs_config_list);
-
- return g;
-}
-
-static inline void pohmelfs_insert_config_entry(struct pohmelfs_sb *psb, struct pohmelfs_config *dst)
-{
- struct pohmelfs_config *tmp;
-
- INIT_LIST_HEAD(&dst->config_entry);
-
- list_for_each_entry(tmp, &psb->state_list, config_entry) {
- if (dst->state.ctl.prio > tmp->state.ctl.prio)
- list_add_tail(&dst->config_entry, &tmp->config_entry);
- }
- if (list_empty(&dst->config_entry))
- list_add_tail(&dst->config_entry, &psb->state_list);
-}
-
-static int pohmelfs_move_config_entry(struct pohmelfs_sb *psb,
- struct pohmelfs_config *dst, struct pohmelfs_config *new)
-{
- if ((dst->state.ctl.prio == new->state.ctl.prio) &&
- (dst->state.ctl.perm == new->state.ctl.perm))
- return 0;
-
- dprintk("%s: dst: prio: %d, perm: %x, new: prio: %d, perm: %d.\n",
- __func__, dst->state.ctl.prio, dst->state.ctl.perm,
- new->state.ctl.prio, new->state.ctl.perm);
- dst->state.ctl.prio = new->state.ctl.prio;
- dst->state.ctl.perm = new->state.ctl.perm;
-
- list_del_init(&dst->config_entry);
- pohmelfs_insert_config_entry(psb, dst);
- return 0;
-}
-
-/*
- * pohmelfs_copy_config() is used to copy new state configs from the
- * config group (controlled by the netlink messages) into the superblock.
- * This happens either at startup time where no transactions can access
- * the list of the configs (and thus list of the network states), or at
- * run-time, where it is protected by the psb->state_lock.
- */
-int pohmelfs_copy_config(struct pohmelfs_sb *psb)
-{
- struct pohmelfs_config_group *g;
- struct pohmelfs_config *c, *dst;
- int err = -ENODEV;
-
- mutex_lock(&pohmelfs_config_lock);
-
- g = pohmelfs_find_config_group(psb->idx);
- if (!g)
- goto out_unlock;
-
- /*
- * Run over all entries in given config group and try to create and
- * initialize those, which do not exist in superblock list.
- * Skip all existing entries.
- */
-
- list_for_each_entry(c, &g->config_list, config_entry) {
- err = 0;
- list_for_each_entry(dst, &psb->state_list, config_entry) {
- if (pohmelfs_config_eql(&dst->state.ctl, &c->state.ctl)) {
- err = pohmelfs_move_config_entry(psb, dst, c);
- if (!err)
- err = -EEXIST;
- break;
- }
- }
-
- if (err)
- continue;
-
- dst = kzalloc(sizeof(struct pohmelfs_config), GFP_KERNEL);
- if (!dst) {
- err = -ENOMEM;
- break;
- }
-
- memcpy(&dst->state.ctl, &c->state.ctl, sizeof(struct pohmelfs_ctl));
-
- pohmelfs_insert_config_entry(psb, dst);
-
- err = pohmelfs_state_init_one(psb, dst);
- if (err) {
- list_del(&dst->config_entry);
- kfree(dst);
- }
-
- err = 0;
- }
-
-out_unlock:
- mutex_unlock(&pohmelfs_config_lock);
-
- return err;
-}
-
-int pohmelfs_copy_crypto(struct pohmelfs_sb *psb)
-{
- struct pohmelfs_config_group *g;
- int err = -ENOENT;
-
- mutex_lock(&pohmelfs_config_lock);
- g = pohmelfs_find_config_group(psb->idx);
- if (!g)
- goto err_out_exit;
-
- if (g->hash_string) {
- err = -ENOMEM;
- psb->hash_string = kstrdup(g->hash_string, GFP_KERNEL);
- if (!psb->hash_string)
- goto err_out_exit;
- psb->hash_strlen = g->hash_strlen;
- }
-
- if (g->cipher_string) {
- psb->cipher_string = kstrdup(g->cipher_string, GFP_KERNEL);
- if (!psb->cipher_string)
- goto err_out_free_hash_string;
- psb->cipher_strlen = g->cipher_strlen;
- }
-
- if (g->hash_keysize) {
- psb->hash_key = kmemdup(g->hash_key, g->hash_keysize,
- GFP_KERNEL);
- if (!psb->hash_key)
- goto err_out_free_cipher_string;
- psb->hash_keysize = g->hash_keysize;
- }
-
- if (g->cipher_keysize) {
- psb->cipher_key = kmemdup(g->cipher_key, g->cipher_keysize,
- GFP_KERNEL);
- if (!psb->cipher_key)
- goto err_out_free_hash;
- psb->cipher_keysize = g->cipher_keysize;
- }
-
- mutex_unlock(&pohmelfs_config_lock);
-
- return 0;
-
-err_out_free_hash:
- kfree(psb->hash_key);
-err_out_free_cipher_string:
- kfree(psb->cipher_string);
-err_out_free_hash_string:
- kfree(psb->hash_string);
-err_out_exit:
- mutex_unlock(&pohmelfs_config_lock);
- return err;
-}
-
-static int pohmelfs_send_reply(int err, int msg_num, int action, struct cn_msg *msg, struct pohmelfs_ctl *ctl)
-{
- struct pohmelfs_cn_ack *ack;
-
- ack = kzalloc(sizeof(struct pohmelfs_cn_ack), GFP_KERNEL);
- if (!ack)
- return -ENOMEM;
-
- memcpy(&ack->msg, msg, sizeof(struct cn_msg));
-
- if (action == POHMELFS_CTLINFO_ACK)
- memcpy(&ack->ctl, ctl, sizeof(struct pohmelfs_ctl));
-
- ack->msg.len = sizeof(struct pohmelfs_cn_ack) - sizeof(struct cn_msg);
- ack->msg.ack = msg->ack + 1;
- ack->error = err;
- ack->msg_num = msg_num;
-
- cn_netlink_send(&ack->msg, 0, GFP_KERNEL);
- kfree(ack);
- return 0;
-}
-
-static int pohmelfs_cn_disp(struct cn_msg *msg)
-{
- struct pohmelfs_config_group *g;
- struct pohmelfs_ctl *ctl = (struct pohmelfs_ctl *)msg->data;
- struct pohmelfs_config *c, *tmp;
- int err = 0, i = 1;
-
- if (msg->len != sizeof(struct pohmelfs_ctl))
- return -EBADMSG;
-
- mutex_lock(&pohmelfs_config_lock);
-
- g = pohmelfs_find_config_group(ctl->idx);
- if (!g) {
- pohmelfs_send_reply(err, 0, POHMELFS_NOINFO_ACK, msg, NULL);
- goto out_unlock;
- }
-
- list_for_each_entry_safe(c, tmp, &g->config_list, config_entry) {
- struct pohmelfs_ctl *sc = &c->state.ctl;
- if (pohmelfs_send_reply(err, g->num_entry - i, POHMELFS_CTLINFO_ACK, msg, sc)) {
- err = -ENOMEM;
- goto out_unlock;
- }
- i += 1;
- }
-
- out_unlock:
- mutex_unlock(&pohmelfs_config_lock);
- return err;
-}
-
-static int pohmelfs_cn_dump(struct cn_msg *msg)
-{
- struct pohmelfs_config_group *g;
- struct pohmelfs_config *c, *tmp;
- int err = 0, i = 1;
- int total_msg = 0;
-
- if (msg->len != sizeof(struct pohmelfs_ctl))
- return -EBADMSG;
-
- mutex_lock(&pohmelfs_config_lock);
-
- list_for_each_entry(g, &pohmelfs_config_list, group_entry)
- total_msg += g->num_entry;
- if (total_msg == 0) {
- if (pohmelfs_send_reply(err, 0, POHMELFS_NOINFO_ACK, msg, NULL))
- err = -ENOMEM;
- goto out_unlock;
- }
-
- list_for_each_entry(g, &pohmelfs_config_list, group_entry) {
- list_for_each_entry_safe(c, tmp, &g->config_list,
- config_entry) {
- struct pohmelfs_ctl *sc = &c->state.ctl;
- if (pohmelfs_send_reply(err, total_msg - i,
- POHMELFS_CTLINFO_ACK, msg,
- sc)) {
- err = -ENOMEM;
- goto out_unlock;
- }
- i += 1;
- }
- }
-
-out_unlock:
- mutex_unlock(&pohmelfs_config_lock);
- return err;
-}
-
-static int pohmelfs_cn_flush(struct cn_msg *msg)
-{
- struct pohmelfs_config_group *g;
- struct pohmelfs_ctl *ctl = (struct pohmelfs_ctl *)msg->data;
- struct pohmelfs_config *c, *tmp;
- int err = 0;
-
- if (msg->len != sizeof(struct pohmelfs_ctl))
- return -EBADMSG;
-
- mutex_lock(&pohmelfs_config_lock);
-
- if (ctl->idx != POHMELFS_NULL_IDX) {
- g = pohmelfs_find_config_group(ctl->idx);
-
- if (!g)
- goto out_unlock;
-
- list_for_each_entry_safe(c, tmp, &g->config_list, config_entry) {
- list_del(&c->config_entry);
- g->num_entry--;
- kfree(c);
- }
- } else {
- list_for_each_entry(g, &pohmelfs_config_list, group_entry) {
- list_for_each_entry_safe(c, tmp, &g->config_list,
- config_entry) {
- list_del(&c->config_entry);
- g->num_entry--;
- kfree(c);
- }
- }
- }
-
-out_unlock:
- mutex_unlock(&pohmelfs_config_lock);
- pohmelfs_cn_dump(msg);
-
- return err;
-}
-
-static int pohmelfs_modify_config(struct pohmelfs_ctl *old, struct pohmelfs_ctl *new)
-{
- old->perm = new->perm;
- old->prio = new->prio;
- return 0;
-}
-
-static int pohmelfs_cn_ctl(struct cn_msg *msg, int action)
-{
- struct pohmelfs_config_group *g;
- struct pohmelfs_ctl *ctl = (struct pohmelfs_ctl *)msg->data;
- struct pohmelfs_config *c, *tmp;
- int err = 0;
-
- if (msg->len != sizeof(struct pohmelfs_ctl))
- return -EBADMSG;
-
- mutex_lock(&pohmelfs_config_lock);
-
- g = pohmelfs_find_create_config_group(ctl->idx);
- if (!g) {
- err = -ENOMEM;
- goto out_unlock;
- }
-
- list_for_each_entry_safe(c, tmp, &g->config_list, config_entry) {
- struct pohmelfs_ctl *sc = &c->state.ctl;
-
- if (pohmelfs_config_eql(sc, ctl)) {
- if (action == POHMELFS_FLAGS_ADD) {
- err = -EEXIST;
- goto out_unlock;
- } else if (action == POHMELFS_FLAGS_DEL) {
- list_del(&c->config_entry);
- g->num_entry--;
- kfree(c);
- goto out_unlock;
- } else if (action == POHMELFS_FLAGS_MODIFY) {
- err = pohmelfs_modify_config(sc, ctl);
- goto out_unlock;
- } else {
- err = -EEXIST;
- goto out_unlock;
- }
- }
- }
- if (action == POHMELFS_FLAGS_DEL) {
- err = -EBADMSG;
- goto out_unlock;
- }
-
- c = kzalloc(sizeof(struct pohmelfs_config), GFP_KERNEL);
- if (!c) {
- err = -ENOMEM;
- goto out_unlock;
- }
- memcpy(&c->state.ctl, ctl, sizeof(struct pohmelfs_ctl));
- g->num_entry++;
-
- list_add_tail(&c->config_entry, &g->config_list);
-
- out_unlock:
- mutex_unlock(&pohmelfs_config_lock);
- if (pohmelfs_send_reply(err, 0, POHMELFS_NOINFO_ACK, msg, NULL))
- err = -ENOMEM;
-
- return err;
-}
-
-static int pohmelfs_crypto_hash_init(struct pohmelfs_config_group *g, struct pohmelfs_crypto *c)
-{
- char *algo = (char *)c->data;
- u8 *key = (u8 *)(algo + c->strlen);
-
- if (g->hash_string)
- return -EEXIST;
-
- g->hash_string = kstrdup(algo, GFP_KERNEL);
- if (!g->hash_string)
- return -ENOMEM;
- g->hash_strlen = c->strlen;
- g->hash_keysize = c->keysize;
-
- g->hash_key = kmemdup(key, c->keysize, GFP_KERNEL);
- if (!g->hash_key) {
- kfree(g->hash_string);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static int pohmelfs_crypto_cipher_init(struct pohmelfs_config_group *g, struct pohmelfs_crypto *c)
-{
- char *algo = (char *)c->data;
- u8 *key = (u8 *)(algo + c->strlen);
-
- if (g->cipher_string)
- return -EEXIST;
-
- g->cipher_string = kstrdup(algo, GFP_KERNEL);
- if (!g->cipher_string)
- return -ENOMEM;
- g->cipher_strlen = c->strlen;
- g->cipher_keysize = c->keysize;
-
- g->cipher_key = kmemdup(key, c->keysize, GFP_KERNEL);
- if (!g->cipher_key) {
- kfree(g->cipher_string);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static int pohmelfs_cn_crypto(struct cn_msg *msg)
-{
- struct pohmelfs_crypto *crypto = (struct pohmelfs_crypto *)msg->data;
- struct pohmelfs_config_group *g;
- int err = 0;
-
- dprintk("%s: idx: %u, strlen: %u, type: %u, keysize: %u, algo: %s.\n",
- __func__, crypto->idx, crypto->strlen, crypto->type,
- crypto->keysize, (char *)crypto->data);
-
- mutex_lock(&pohmelfs_config_lock);
- g = pohmelfs_find_create_config_group(crypto->idx);
- if (!g) {
- err = -ENOMEM;
- goto out_unlock;
- }
-
- switch (crypto->type) {
- case POHMELFS_CRYPTO_HASH:
- err = pohmelfs_crypto_hash_init(g, crypto);
- break;
- case POHMELFS_CRYPTO_CIPHER:
- err = pohmelfs_crypto_cipher_init(g, crypto);
- break;
- default:
- err = -ENOTSUPP;
- break;
- }
-
-out_unlock:
- mutex_unlock(&pohmelfs_config_lock);
- if (pohmelfs_send_reply(err, 0, POHMELFS_NOINFO_ACK, msg, NULL))
- err = -ENOMEM;
-
- return err;
-}
-
-static void pohmelfs_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
-{
- int err;
-
- if (!cap_raised(current_cap(), CAP_SYS_ADMIN))
- return;
-
- switch (msg->flags) {
- case POHMELFS_FLAGS_ADD:
- case POHMELFS_FLAGS_DEL:
- case POHMELFS_FLAGS_MODIFY:
- err = pohmelfs_cn_ctl(msg, msg->flags);
- break;
- case POHMELFS_FLAGS_FLUSH:
- err = pohmelfs_cn_flush(msg);
- break;
- case POHMELFS_FLAGS_SHOW:
- err = pohmelfs_cn_disp(msg);
- break;
- case POHMELFS_FLAGS_DUMP:
- err = pohmelfs_cn_dump(msg);
- break;
- case POHMELFS_FLAGS_CRYPTO:
- err = pohmelfs_cn_crypto(msg);
- break;
- default:
- err = -ENOSYS;
- break;
- }
-}
-
-int pohmelfs_config_check(struct pohmelfs_config *config, int idx)
-{
- struct pohmelfs_ctl *ctl = &config->state.ctl;
- struct pohmelfs_config *tmp;
- int err = -ENOENT;
- struct pohmelfs_ctl *sc;
- struct pohmelfs_config_group *g;
-
- mutex_lock(&pohmelfs_config_lock);
-
- g = pohmelfs_find_config_group(ctl->idx);
- if (g) {
- list_for_each_entry(tmp, &g->config_list, config_entry) {
- sc = &tmp->state.ctl;
-
- if (pohmelfs_config_eql(sc, ctl)) {
- err = 0;
- break;
- }
- }
- }
-
- mutex_unlock(&pohmelfs_config_lock);
-
- return err;
-}
-
-int __init pohmelfs_config_init(void)
-{
- /* XXX remove (void *) cast when vanilla connector got synced */
- return cn_add_callback(&pohmelfs_cn_id, "pohmelfs", (void *)pohmelfs_cn_callback);
-}
-
-void pohmelfs_config_exit(void)
-{
- struct pohmelfs_config *c, *tmp;
- struct pohmelfs_config_group *g, *gtmp;
-
- cn_del_callback(&pohmelfs_cn_id);
-
- mutex_lock(&pohmelfs_config_lock);
- list_for_each_entry_safe(g, gtmp, &pohmelfs_config_list, group_entry) {
- list_for_each_entry_safe(c, tmp, &g->config_list, config_entry) {
- list_del(&c->config_entry);
- kfree(c);
- }
-
- list_del(&g->group_entry);
-
- kfree(g->hash_string);
-
- kfree(g->cipher_string);
-
- kfree(g);
- }
- mutex_unlock(&pohmelfs_config_lock);
-}
+++ /dev/null
-/*
- * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/crypto.h>
-#include <linux/highmem.h>
-#include <linux/kthread.h>
-#include <linux/pagemap.h>
-#include <linux/scatterlist.h>
-#include <linux/slab.h>
-
-#include "netfs.h"
-
-static struct crypto_hash *pohmelfs_init_hash(struct pohmelfs_sb *psb)
-{
- int err;
- struct crypto_hash *hash;
-
- hash = crypto_alloc_hash(psb->hash_string, 0, CRYPTO_ALG_ASYNC);
- if (IS_ERR(hash)) {
- err = PTR_ERR(hash);
- dprintk("%s: idx: %u: failed to allocate hash '%s', err: %d.\n",
- __func__, psb->idx, psb->hash_string, err);
- goto err_out_exit;
- }
-
- psb->crypto_attached_size = crypto_hash_digestsize(hash);
-
- if (!psb->hash_keysize)
- return hash;
-
- err = crypto_hash_setkey(hash, psb->hash_key, psb->hash_keysize);
- if (err) {
- dprintk("%s: idx: %u: failed to set key for hash '%s', err: %d.\n",
- __func__, psb->idx, psb->hash_string, err);
- goto err_out_free;
- }
-
- return hash;
-
-err_out_free:
- crypto_free_hash(hash);
-err_out_exit:
- return ERR_PTR(err);
-}
-
-static struct crypto_ablkcipher *pohmelfs_init_cipher(struct pohmelfs_sb *psb)
-{
- int err = -EINVAL;
- struct crypto_ablkcipher *cipher;
-
- if (!psb->cipher_keysize)
- goto err_out_exit;
-
- cipher = crypto_alloc_ablkcipher(psb->cipher_string, 0, 0);
- if (IS_ERR(cipher)) {
- err = PTR_ERR(cipher);
- dprintk("%s: idx: %u: failed to allocate cipher '%s', err: %d.\n",
- __func__, psb->idx, psb->cipher_string, err);
- goto err_out_exit;
- }
-
- crypto_ablkcipher_clear_flags(cipher, ~0);
-
- err = crypto_ablkcipher_setkey(cipher, psb->cipher_key, psb->cipher_keysize);
- if (err) {
- dprintk("%s: idx: %u: failed to set key for cipher '%s', err: %d.\n",
- __func__, psb->idx, psb->cipher_string, err);
- goto err_out_free;
- }
-
- return cipher;
-
-err_out_free:
- crypto_free_ablkcipher(cipher);
-err_out_exit:
- return ERR_PTR(err);
-}
-
-int pohmelfs_crypto_engine_init(struct pohmelfs_crypto_engine *e, struct pohmelfs_sb *psb)
-{
- int err;
-
- e->page_num = 0;
-
- e->size = PAGE_SIZE;
- e->data = kmalloc(e->size, GFP_KERNEL);
- if (!e->data) {
- err = -ENOMEM;
- goto err_out_exit;
- }
-
- if (psb->hash_string) {
- e->hash = pohmelfs_init_hash(psb);
- if (IS_ERR(e->hash)) {
- err = PTR_ERR(e->hash);
- e->hash = NULL;
- goto err_out_free;
- }
- }
-
- if (psb->cipher_string) {
- e->cipher = pohmelfs_init_cipher(psb);
- if (IS_ERR(e->cipher)) {
- err = PTR_ERR(e->cipher);
- e->cipher = NULL;
- goto err_out_free_hash;
- }
- }
-
- return 0;
-
-err_out_free_hash:
- crypto_free_hash(e->hash);
-err_out_free:
- kfree(e->data);
-err_out_exit:
- return err;
-}
-
-void pohmelfs_crypto_engine_exit(struct pohmelfs_crypto_engine *e)
-{
- crypto_free_hash(e->hash);
- crypto_free_ablkcipher(e->cipher);
- kfree(e->data);
-}
-
-static void pohmelfs_crypto_complete(struct crypto_async_request *req, int err)
-{
- struct pohmelfs_crypto_completion *c = req->data;
-
- if (err == -EINPROGRESS)
- return;
-
- dprintk("%s: req: %p, err: %d.\n", __func__, req, err);
- c->error = err;
- complete(&c->complete);
-}
-
-static int pohmelfs_crypto_process(struct ablkcipher_request *req,
- struct scatterlist *sg_dst, struct scatterlist *sg_src,
- void *iv, int enc, unsigned long timeout)
-{
- struct pohmelfs_crypto_completion complete;
- int err;
-
- init_completion(&complete.complete);
- complete.error = -EINPROGRESS;
-
- ablkcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
- pohmelfs_crypto_complete, &complete);
-
- ablkcipher_request_set_crypt(req, sg_src, sg_dst, sg_src->length, iv);
-
- if (enc)
- err = crypto_ablkcipher_encrypt(req);
- else
- err = crypto_ablkcipher_decrypt(req);
-
- switch (err) {
- case -EINPROGRESS:
- case -EBUSY:
- err = wait_for_completion_interruptible_timeout(&complete.complete,
- timeout);
- if (!err)
- err = -ETIMEDOUT;
- else if (err > 0)
- err = complete.error;
- break;
- default:
- break;
- }
-
- return err;
-}
-
-int pohmelfs_crypto_process_input_data(struct pohmelfs_crypto_engine *e, u64 cmd_iv,
- void *data, struct page *page, unsigned int size)
-{
- int err;
- struct scatterlist sg;
-
- if (!e->cipher && !e->hash)
- return 0;
-
- dprintk("%s: eng: %p, iv: %llx, data: %p, page: %p/%lu, size: %u.\n",
- __func__, e, cmd_iv, data, page, (page) ? page->index : 0, size);
-
- if (data) {
- sg_init_one(&sg, data, size);
- } else {
- sg_init_table(&sg, 1);
- sg_set_page(&sg, page, size, 0);
- }
-
- if (e->cipher) {
- struct ablkcipher_request *req = e->data + crypto_hash_digestsize(e->hash);
- u8 iv[32];
-
- memset(iv, 0, sizeof(iv));
- memcpy(iv, &cmd_iv, sizeof(cmd_iv));
-
- ablkcipher_request_set_tfm(req, e->cipher);
-
- err = pohmelfs_crypto_process(req, &sg, &sg, iv, 0, e->timeout);
- if (err)
- goto err_out_exit;
- }
-
- if (e->hash) {
- struct hash_desc desc;
- void *dst = e->data + e->size/2;
-
- desc.tfm = e->hash;
- desc.flags = 0;
-
- err = crypto_hash_init(&desc);
- if (err)
- goto err_out_exit;
-
- err = crypto_hash_update(&desc, &sg, size);
- if (err)
- goto err_out_exit;
-
- err = crypto_hash_final(&desc, dst);
- if (err)
- goto err_out_exit;
-
- err = !!memcmp(dst, e->data, crypto_hash_digestsize(e->hash));
-
- if (err) {
-#ifdef CONFIG_POHMELFS_DEBUG
- unsigned int i;
- unsigned char *recv = e->data, *calc = dst;
-
- dprintk("%s: eng: %p, hash: %p, cipher: %p: iv : %llx, hash mismatch (recv/calc): ",
- __func__, e, e->hash, e->cipher, cmd_iv);
- for (i = 0; i < crypto_hash_digestsize(e->hash); ++i) {
-#if 0
- dprintka("%02x ", recv[i]);
- if (recv[i] != calc[i]) {
- dprintka("| calc byte: %02x.\n", calc[i]);
- break;
- }
-#else
- dprintka("%02x/%02x ", recv[i], calc[i]);
-#endif
- }
- dprintk("\n");
-#endif
- goto err_out_exit;
- } else {
- dprintk("%s: eng: %p, hash: %p, cipher: %p: hashes matched.\n",
- __func__, e, e->hash, e->cipher);
- }
- }
-
- dprintk("%s: eng: %p, size: %u, hash: %p, cipher: %p: completed.\n",
- __func__, e, e->size, e->hash, e->cipher);
-
- return 0;
-
-err_out_exit:
- dprintk("%s: eng: %p, hash: %p, cipher: %p: err: %d.\n",
- __func__, e, e->hash, e->cipher, err);
- return err;
-}
-
-static int pohmelfs_trans_iter(struct netfs_trans *t, struct pohmelfs_crypto_engine *e,
- int (*iterator) (struct pohmelfs_crypto_engine *e,
- struct scatterlist *dst,
- struct scatterlist *src))
-{
- void *data = t->iovec.iov_base + sizeof(struct netfs_cmd) + t->psb->crypto_attached_size;
- unsigned int size = t->iovec.iov_len - sizeof(struct netfs_cmd) - t->psb->crypto_attached_size;
- struct netfs_cmd *cmd = data;
- unsigned int sz, pages = t->attached_pages, i, csize, cmd_cmd, dpage_idx;
- struct scatterlist sg_src, sg_dst;
- int err;
-
- while (size) {
- cmd = data;
- cmd_cmd = __be16_to_cpu(cmd->cmd);
- csize = __be32_to_cpu(cmd->size);
- cmd->iv = __cpu_to_be64(e->iv);
-
- if (cmd_cmd == NETFS_READ_PAGES || cmd_cmd == NETFS_READ_PAGE)
- csize = __be16_to_cpu(cmd->ext);
-
- sz = csize + __be16_to_cpu(cmd->cpad) + sizeof(struct netfs_cmd);
-
- dprintk("%s: size: %u, sz: %u, cmd_size: %u, cmd_cpad: %u.\n",
- __func__, size, sz, __be32_to_cpu(cmd->size), __be16_to_cpu(cmd->cpad));
-
- data += sz;
- size -= sz;
-
- sg_init_one(&sg_src, cmd->data, sz - sizeof(struct netfs_cmd));
- sg_init_one(&sg_dst, cmd->data, sz - sizeof(struct netfs_cmd));
-
- err = iterator(e, &sg_dst, &sg_src);
- if (err)
- return err;
- }
-
- if (!pages)
- return 0;
-
- dpage_idx = 0;
- for (i = 0; i < t->page_num; ++i) {
- struct page *page = t->pages[i];
- struct page *dpage = e->pages[dpage_idx];
-
- if (!page)
- continue;
-
- sg_init_table(&sg_src, 1);
- sg_init_table(&sg_dst, 1);
- sg_set_page(&sg_src, page, page_private(page), 0);
- sg_set_page(&sg_dst, dpage, page_private(page), 0);
-
- err = iterator(e, &sg_dst, &sg_src);
- if (err)
- return err;
-
- pages--;
- if (!pages)
- break;
- dpage_idx++;
- }
-
- return 0;
-}
-
-static int pohmelfs_encrypt_iterator(struct pohmelfs_crypto_engine *e,
- struct scatterlist *sg_dst, struct scatterlist *sg_src)
-{
- struct ablkcipher_request *req = e->data;
- u8 iv[32];
-
- memset(iv, 0, sizeof(iv));
-
- memcpy(iv, &e->iv, sizeof(e->iv));
-
- return pohmelfs_crypto_process(req, sg_dst, sg_src, iv, 1, e->timeout);
-}
-
-static int pohmelfs_encrypt(struct pohmelfs_crypto_thread *tc)
-{
- struct netfs_trans *t = tc->trans;
- struct pohmelfs_crypto_engine *e = &tc->eng;
- struct ablkcipher_request *req = e->data;
-
- memset(req, 0, sizeof(struct ablkcipher_request));
- ablkcipher_request_set_tfm(req, e->cipher);
-
- e->iv = pohmelfs_gen_iv(t);
-
- return pohmelfs_trans_iter(t, e, pohmelfs_encrypt_iterator);
-}
-
-static int pohmelfs_hash_iterator(struct pohmelfs_crypto_engine *e,
- struct scatterlist *sg_dst, struct scatterlist *sg_src)
-{
- return crypto_hash_update(e->data, sg_src, sg_src->length);
-}
-
-static int pohmelfs_hash(struct pohmelfs_crypto_thread *tc)
-{
- struct pohmelfs_crypto_engine *e = &tc->eng;
- struct hash_desc *desc = e->data;
- unsigned char *dst = tc->trans->iovec.iov_base + sizeof(struct netfs_cmd);
- int err;
-
- desc->tfm = e->hash;
- desc->flags = 0;
-
- err = crypto_hash_init(desc);
- if (err)
- return err;
-
- err = pohmelfs_trans_iter(tc->trans, e, pohmelfs_hash_iterator);
- if (err)
- return err;
-
- err = crypto_hash_final(desc, dst);
- if (err)
- return err;
-
- {
- unsigned int i;
- dprintk("%s: ", __func__);
- for (i = 0; i < tc->psb->crypto_attached_size; ++i)
- dprintka("%02x ", dst[i]);
- dprintka("\n");
- }
-
- return 0;
-}
-
-static void pohmelfs_crypto_pages_free(struct pohmelfs_crypto_engine *e)
-{
- unsigned int i;
-
- for (i = 0; i < e->page_num; ++i)
- __free_page(e->pages[i]);
- kfree(e->pages);
-}
-
-static int pohmelfs_crypto_pages_alloc(struct pohmelfs_crypto_engine *e, struct pohmelfs_sb *psb)
-{
- unsigned int i;
-
- e->pages = kmalloc(psb->trans_max_pages * sizeof(struct page *), GFP_KERNEL);
- if (!e->pages)
- return -ENOMEM;
-
- for (i = 0; i < psb->trans_max_pages; ++i) {
- e->pages[i] = alloc_page(GFP_KERNEL);
- if (!e->pages[i])
- break;
- }
-
- e->page_num = i;
- if (!e->page_num)
- goto err_out_free;
-
- return 0;
-
-err_out_free:
- kfree(e->pages);
- return -ENOMEM;
-}
-
-static void pohmelfs_sys_crypto_exit_one(struct pohmelfs_crypto_thread *t)
-{
- struct pohmelfs_sb *psb = t->psb;
-
- if (t->thread)
- kthread_stop(t->thread);
-
- mutex_lock(&psb->crypto_thread_lock);
- list_del(&t->thread_entry);
- psb->crypto_thread_num--;
- mutex_unlock(&psb->crypto_thread_lock);
-
- pohmelfs_crypto_engine_exit(&t->eng);
- pohmelfs_crypto_pages_free(&t->eng);
- kfree(t);
-}
-
-static int pohmelfs_crypto_finish(struct netfs_trans *t, struct pohmelfs_sb *psb, int err)
-{
- struct netfs_cmd *cmd = t->iovec.iov_base;
- netfs_convert_cmd(cmd);
-
- if (likely(!err))
- err = netfs_trans_finish_send(t, psb);
-
- t->result = err;
- netfs_trans_put(t);
-
- return err;
-}
-
-void pohmelfs_crypto_thread_make_ready(struct pohmelfs_crypto_thread *th)
-{
- struct pohmelfs_sb *psb = th->psb;
-
- th->page = NULL;
- th->trans = NULL;
-
- mutex_lock(&psb->crypto_thread_lock);
- list_move_tail(&th->thread_entry, &psb->crypto_ready_list);
- mutex_unlock(&psb->crypto_thread_lock);
- wake_up(&psb->wait);
-}
-
-static int pohmelfs_crypto_thread_trans(struct pohmelfs_crypto_thread *t)
-{
- struct netfs_trans *trans;
- int err = 0;
-
- trans = t->trans;
- trans->eng = NULL;
-
- if (t->eng.hash) {
- err = pohmelfs_hash(t);
- if (err)
- goto out_complete;
- }
-
- if (t->eng.cipher) {
- err = pohmelfs_encrypt(t);
- if (err)
- goto out_complete;
- trans->eng = &t->eng;
- }
-
-out_complete:
- t->page = NULL;
- t->trans = NULL;
-
- if (!trans->eng)
- pohmelfs_crypto_thread_make_ready(t);
-
- pohmelfs_crypto_finish(trans, t->psb, err);
- return err;
-}
-
-static int pohmelfs_crypto_thread_page(struct pohmelfs_crypto_thread *t)
-{
- struct pohmelfs_crypto_engine *e = &t->eng;
- struct page *page = t->page;
- int err;
-
- WARN_ON(!PageChecked(page));
-
- err = pohmelfs_crypto_process_input_data(e, e->iv, NULL, page, t->size);
- if (!err)
- SetPageUptodate(page);
- else
- SetPageError(page);
- unlock_page(page);
- page_cache_release(page);
-
- pohmelfs_crypto_thread_make_ready(t);
-
- return err;
-}
-
-static int pohmelfs_crypto_thread_func(void *data)
-{
- struct pohmelfs_crypto_thread *t = data;
-
- while (!kthread_should_stop()) {
- wait_event_interruptible(t->wait, kthread_should_stop() ||
- t->trans || t->page);
-
- if (kthread_should_stop())
- break;
-
- if (!t->trans && !t->page)
- continue;
-
- dprintk("%s: thread: %p, trans: %p, page: %p.\n",
- __func__, t, t->trans, t->page);
-
- if (t->trans)
- pohmelfs_crypto_thread_trans(t);
- else if (t->page)
- pohmelfs_crypto_thread_page(t);
- }
-
- return 0;
-}
-
-static void pohmelfs_crypto_flush(struct pohmelfs_sb *psb, struct list_head *head)
-{
- while (!list_empty(head)) {
- struct pohmelfs_crypto_thread *t = NULL;
-
- mutex_lock(&psb->crypto_thread_lock);
- if (!list_empty(head)) {
- t = list_first_entry(head, struct pohmelfs_crypto_thread, thread_entry);
- list_del_init(&t->thread_entry);
- }
- mutex_unlock(&psb->crypto_thread_lock);
-
- if (t)
- pohmelfs_sys_crypto_exit_one(t);
- }
-}
-
-static void pohmelfs_sys_crypto_exit(struct pohmelfs_sb *psb)
-{
- while (!list_empty(&psb->crypto_active_list) || !list_empty(&psb->crypto_ready_list)) {
- dprintk("%s: crypto_thread_num: %u.\n", __func__, psb->crypto_thread_num);
- pohmelfs_crypto_flush(psb, &psb->crypto_active_list);
- pohmelfs_crypto_flush(psb, &psb->crypto_ready_list);
- }
-}
-
-static int pohmelfs_sys_crypto_init(struct pohmelfs_sb *psb)
-{
- unsigned int i;
- struct pohmelfs_crypto_thread *t;
- struct pohmelfs_config *c;
- struct netfs_state *st;
- int err;
-
- list_for_each_entry(c, &psb->state_list, config_entry) {
- st = &c->state;
-
- err = pohmelfs_crypto_engine_init(&st->eng, psb);
- if (err)
- goto err_out_exit;
-
- dprintk("%s: st: %p, eng: %p, hash: %p, cipher: %p.\n",
- __func__, st, &st->eng, &st->eng.hash, &st->eng.cipher);
- }
-
- for (i = 0; i < psb->crypto_thread_num; ++i) {
- err = -ENOMEM;
- t = kzalloc(sizeof(struct pohmelfs_crypto_thread), GFP_KERNEL);
- if (!t)
- goto err_out_free_state_engines;
-
- init_waitqueue_head(&t->wait);
-
- t->psb = psb;
- t->trans = NULL;
- t->eng.thread = t;
-
- err = pohmelfs_crypto_engine_init(&t->eng, psb);
- if (err)
- goto err_out_free_state_engines;
-
- err = pohmelfs_crypto_pages_alloc(&t->eng, psb);
- if (err)
- goto err_out_free;
-
- t->thread = kthread_run(pohmelfs_crypto_thread_func, t,
- "pohmelfs-crypto-%d-%d", psb->idx, i);
- if (IS_ERR(t->thread)) {
- err = PTR_ERR(t->thread);
- t->thread = NULL;
- goto err_out_free;
- }
-
- if (t->eng.cipher)
- psb->crypto_align_size = crypto_ablkcipher_blocksize(t->eng.cipher);
-
- mutex_lock(&psb->crypto_thread_lock);
- list_add_tail(&t->thread_entry, &psb->crypto_ready_list);
- mutex_unlock(&psb->crypto_thread_lock);
- }
-
- psb->crypto_thread_num = i;
- return 0;
-
-err_out_free:
- pohmelfs_sys_crypto_exit_one(t);
-err_out_free_state_engines:
- list_for_each_entry(c, &psb->state_list, config_entry) {
- st = &c->state;
- pohmelfs_crypto_engine_exit(&st->eng);
- }
-err_out_exit:
- pohmelfs_sys_crypto_exit(psb);
- return err;
-}
-
-void pohmelfs_crypto_exit(struct pohmelfs_sb *psb)
-{
- pohmelfs_sys_crypto_exit(psb);
-
- kfree(psb->hash_string);
- kfree(psb->cipher_string);
-}
-
-static int pohmelfs_crypt_init_complete(struct page **pages, unsigned int page_num,
- void *private, int err)
-{
- struct pohmelfs_sb *psb = private;
-
- psb->flags = -err;
- dprintk("%s: err: %d.\n", __func__, err);
-
- wake_up(&psb->wait);
-
- return err;
-}
-
-static int pohmelfs_crypto_init_handshake(struct pohmelfs_sb *psb)
-{
- struct netfs_trans *t;
- struct netfs_crypto_capabilities *cap;
- struct netfs_cmd *cmd;
- char *str;
- int err = -ENOMEM, size;
-
- size = sizeof(struct netfs_crypto_capabilities) +
- psb->cipher_strlen + psb->hash_strlen + 2; /* 0 bytes */
-
- t = netfs_trans_alloc(psb, size, 0, 0);
- if (!t)
- goto err_out_exit;
-
- t->complete = pohmelfs_crypt_init_complete;
- t->private = psb;
-
- cmd = netfs_trans_current(t);
- cap = (struct netfs_crypto_capabilities *)(cmd + 1);
- str = (char *)(cap + 1);
-
- cmd->cmd = NETFS_CAPABILITIES;
- cmd->id = POHMELFS_CRYPTO_CAPABILITIES;
- cmd->size = size;
- cmd->start = 0;
- cmd->ext = 0;
- cmd->csize = 0;
-
- netfs_convert_cmd(cmd);
- netfs_trans_update(cmd, t, size);
-
- cap->hash_strlen = psb->hash_strlen;
- if (cap->hash_strlen) {
- sprintf(str, "%s", psb->hash_string);
- str += cap->hash_strlen;
- }
-
- cap->cipher_strlen = psb->cipher_strlen;
- cap->cipher_keysize = psb->cipher_keysize;
- if (cap->cipher_strlen)
- sprintf(str, "%s", psb->cipher_string);
-
- netfs_convert_crypto_capabilities(cap);
-
- psb->flags = ~0;
- err = netfs_trans_finish(t, psb);
- if (err)
- goto err_out_exit;
-
- err = wait_event_interruptible_timeout(psb->wait, (psb->flags != ~0),
- psb->wait_on_page_timeout);
- if (!err)
- err = -ETIMEDOUT;
- else if (err > 0)
- err = -psb->flags;
-
- if (!err)
- psb->perform_crypto = 1;
- psb->flags = 0;
-
- /*
- * At this point NETFS_CAPABILITIES response command
- * should setup superblock in a way, which is acceptable
- * for both client and server, so if server refuses connection,
- * it will send error in transaction response.
- */
-
- if (err)
- goto err_out_exit;
-
- return 0;
-
-err_out_exit:
- return err;
-}
-
-int pohmelfs_crypto_init(struct pohmelfs_sb *psb)
-{
- int err;
-
- if (!psb->cipher_string && !psb->hash_string)
- return 0;
-
- err = pohmelfs_crypto_init_handshake(psb);
- if (err)
- return err;
-
- err = pohmelfs_sys_crypto_init(psb);
- if (err)
- return err;
-
- return 0;
-}
-
-static int pohmelfs_crypto_thread_get(struct pohmelfs_sb *psb,
- int (*action)(struct pohmelfs_crypto_thread *t, void *data), void *data)
-{
- struct pohmelfs_crypto_thread *t = NULL;
- int err;
-
- while (!t) {
- err = wait_event_interruptible_timeout(psb->wait,
- !list_empty(&psb->crypto_ready_list),
- psb->wait_on_page_timeout);
-
- t = NULL;
- err = 0;
- mutex_lock(&psb->crypto_thread_lock);
- if (!list_empty(&psb->crypto_ready_list)) {
- t = list_entry(psb->crypto_ready_list.prev,
- struct pohmelfs_crypto_thread,
- thread_entry);
-
- list_move_tail(&t->thread_entry,
- &psb->crypto_active_list);
-
- action(t, data);
- wake_up(&t->wait);
-
- }
- mutex_unlock(&psb->crypto_thread_lock);
- }
-
- return err;
-}
-
-static int pohmelfs_trans_crypt_action(struct pohmelfs_crypto_thread *t, void *data)
-{
- struct netfs_trans *trans = data;
-
- netfs_trans_get(trans);
- t->trans = trans;
-
- dprintk("%s: t: %p, gen: %u, thread: %p.\n", __func__, trans, trans->gen, t);
- return 0;
-}
-
-int pohmelfs_trans_crypt(struct netfs_trans *trans, struct pohmelfs_sb *psb)
-{
- if ((!psb->hash_string && !psb->cipher_string) || !psb->perform_crypto) {
- netfs_trans_get(trans);
- return pohmelfs_crypto_finish(trans, psb, 0);
- }
-
- return pohmelfs_crypto_thread_get(psb, pohmelfs_trans_crypt_action, trans);
-}
-
-struct pohmelfs_crypto_input_action_data {
- struct page *page;
- struct pohmelfs_crypto_engine *e;
- u64 iv;
- unsigned int size;
-};
-
-static int pohmelfs_crypt_input_page_action(struct pohmelfs_crypto_thread *t, void *data)
-{
- struct pohmelfs_crypto_input_action_data *act = data;
-
- memcpy(t->eng.data, act->e->data, t->psb->crypto_attached_size);
-
- t->size = act->size;
- t->eng.iv = act->iv;
-
- t->page = act->page;
- return 0;
-}
-
-int pohmelfs_crypto_process_input_page(struct pohmelfs_crypto_engine *e,
- struct page *page, unsigned int size, u64 iv)
-{
- struct inode *inode = page->mapping->host;
- struct pohmelfs_crypto_input_action_data act;
- int err = -ENOENT;
-
- act.page = page;
- act.e = e;
- act.size = size;
- act.iv = iv;
-
- err = pohmelfs_crypto_thread_get(POHMELFS_SB(inode->i_sb),
- pohmelfs_crypt_input_page_action, &act);
- if (err)
- goto err_out_exit;
-
- return 0;
-
-err_out_exit:
- SetPageUptodate(page);
- page_cache_release(page);
-
- return err;
-}
+++ /dev/null
-/*
- * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/jhash.h>
-#include <linux/namei.h>
-#include <linux/slab.h>
-#include <linux/pagemap.h>
-
-#include "netfs.h"
-
-static int pohmelfs_cmp_hash(struct pohmelfs_name *n, u32 hash)
-{
- if (n->hash > hash)
- return -1;
- if (n->hash < hash)
- return 1;
-
- return 0;
-}
-
-static struct pohmelfs_name *pohmelfs_search_hash_unprecise(struct pohmelfs_inode *pi, u32 hash)
-{
- struct rb_node *n = pi->hash_root.rb_node;
- struct pohmelfs_name *tmp = NULL;
- int cmp;
-
- while (n) {
- tmp = rb_entry(n, struct pohmelfs_name, hash_node);
-
- cmp = pohmelfs_cmp_hash(tmp, hash);
- if (cmp < 0)
- n = n->rb_left;
- else if (cmp > 0)
- n = n->rb_right;
- else
- break;
-
- }
-
- return tmp;
-}
-
-struct pohmelfs_name *pohmelfs_search_hash(struct pohmelfs_inode *pi, u32 hash)
-{
- struct pohmelfs_name *tmp;
-
- tmp = pohmelfs_search_hash_unprecise(pi, hash);
- if (tmp && (tmp->hash == hash))
- return tmp;
-
- return NULL;
-}
-
-static void __pohmelfs_name_del(struct pohmelfs_inode *parent, struct pohmelfs_name *node)
-{
- rb_erase(&node->hash_node, &parent->hash_root);
-}
-
-/*
- * Remove name cache entry from its caches and free it.
- */
-static void pohmelfs_name_free(struct pohmelfs_inode *parent, struct pohmelfs_name *node)
-{
- __pohmelfs_name_del(parent, node);
- list_del(&node->sync_create_entry);
- kfree(node);
-}
-
-static struct pohmelfs_name *pohmelfs_insert_hash(struct pohmelfs_inode *pi,
- struct pohmelfs_name *new)
-{
- struct rb_node **n = &pi->hash_root.rb_node, *parent = NULL;
- struct pohmelfs_name *ret = NULL, *tmp;
- int cmp;
-
- while (*n) {
- parent = *n;
-
- tmp = rb_entry(parent, struct pohmelfs_name, hash_node);
-
- cmp = pohmelfs_cmp_hash(tmp, new->hash);
- if (cmp < 0)
- n = &parent->rb_left;
- else if (cmp > 0)
- n = &parent->rb_right;
- else {
- ret = tmp;
- break;
- }
- }
-
- if (ret) {
- printk("%s: exist: parent: %llu, ino: %llu, hash: %x, len: %u, data: '%s', "
- "new: ino: %llu, hash: %x, len: %u, data: '%s'.\n",
- __func__, pi->ino,
- ret->ino, ret->hash, ret->len, ret->data,
- new->ino, new->hash, new->len, new->data);
- ret->ino = new->ino;
- return ret;
- }
-
- rb_link_node(&new->hash_node, parent, n);
- rb_insert_color(&new->hash_node, &pi->hash_root);
-
- return NULL;
-}
-
-/*
- * Free name cache for given inode.
- */
-void pohmelfs_free_names(struct pohmelfs_inode *parent)
-{
- struct rb_node *rb_node;
- struct pohmelfs_name *n;
-
- for (rb_node = rb_first(&parent->hash_root); rb_node;) {
- n = rb_entry(rb_node, struct pohmelfs_name, hash_node);
- rb_node = rb_next(rb_node);
-
- pohmelfs_name_free(parent, n);
- }
-}
-
-static void pohmelfs_fix_offset(struct pohmelfs_inode *parent, struct pohmelfs_name *node)
-{
- parent->total_len -= node->len;
-}
-
-/*
- * Free name cache entry helper.
- */
-void pohmelfs_name_del(struct pohmelfs_inode *parent, struct pohmelfs_name *node)
-{
- pohmelfs_fix_offset(parent, node);
- pohmelfs_name_free(parent, node);
-}
-
-/*
- * Insert new name cache entry into all hash cache.
- */
-static int pohmelfs_insert_name(struct pohmelfs_inode *parent, struct pohmelfs_name *n)
-{
- struct pohmelfs_name *name;
-
- name = pohmelfs_insert_hash(parent, n);
- if (name)
- return -EEXIST;
-
- parent->total_len += n->len;
- list_add_tail(&n->sync_create_entry, &parent->sync_create_list);
-
- return 0;
-}
-
-/*
- * Allocate new name cache entry.
- */
-static struct pohmelfs_name *pohmelfs_name_alloc(unsigned int len)
-{
- struct pohmelfs_name *n;
-
- n = kzalloc(sizeof(struct pohmelfs_name) + len, GFP_KERNEL);
- if (!n)
- return NULL;
-
- INIT_LIST_HEAD(&n->sync_create_entry);
-
- n->data = (char *)(n+1);
-
- return n;
-}
-
-/*
- * Add new name entry into directory's cache.
- */
-static int pohmelfs_add_dir(struct pohmelfs_sb *psb, struct pohmelfs_inode *parent,
- struct pohmelfs_inode *npi, struct qstr *str, unsigned int mode, int link)
-{
- int err = -ENOMEM;
- struct pohmelfs_name *n;
-
- n = pohmelfs_name_alloc(str->len + 1);
- if (!n)
- goto err_out_exit;
-
- n->ino = npi->ino;
- n->mode = mode;
- n->len = str->len;
- n->hash = str->hash;
- sprintf(n->data, "%s", str->name);
-
- mutex_lock(&parent->offset_lock);
- err = pohmelfs_insert_name(parent, n);
- mutex_unlock(&parent->offset_lock);
-
- if (err) {
- if (err != -EEXIST)
- goto err_out_free;
- kfree(n);
- }
-
- return 0;
-
-err_out_free:
- kfree(n);
-err_out_exit:
- return err;
-}
-
-/*
- * Create new inode for given parameters (name, inode info, parent).
- * This does not create object on the server, it will be synced there during writeback.
- */
-struct pohmelfs_inode *pohmelfs_new_inode(struct pohmelfs_sb *psb,
- struct pohmelfs_inode *parent, struct qstr *str,
- struct netfs_inode_info *info, int link)
-{
- struct inode *new = NULL;
- struct pohmelfs_inode *npi;
- int err = -EEXIST;
-
- dprintk("%s: creating inode: parent: %llu, ino: %llu, str: %p.\n",
- __func__, (parent) ? parent->ino : 0, info->ino, str);
-
- err = -ENOMEM;
- new = iget_locked(psb->sb, info->ino);
- if (!new)
- goto err_out_exit;
-
- npi = POHMELFS_I(new);
- npi->ino = info->ino;
- err = 0;
-
- if (new->i_state & I_NEW) {
- dprintk("%s: filling VFS inode: %lu/%llu.\n",
- __func__, new->i_ino, info->ino);
- pohmelfs_fill_inode(new, info);
-
- if (S_ISDIR(info->mode)) {
- struct qstr s;
-
- s.name = ".";
- s.len = 1;
- s.hash = jhash(s.name, s.len, 0);
-
- err = pohmelfs_add_dir(psb, npi, npi, &s, info->mode, 0);
- if (err)
- goto err_out_put;
-
- s.name = "..";
- s.len = 2;
- s.hash = jhash(s.name, s.len, 0);
-
- err = pohmelfs_add_dir(psb, npi, (parent) ? parent : npi, &s,
- (parent) ? parent->vfs_inode.i_mode : npi->vfs_inode.i_mode, 0);
- if (err)
- goto err_out_put;
- }
- }
-
- if (str) {
- if (parent) {
- err = pohmelfs_add_dir(psb, parent, npi, str, info->mode, link);
-
- dprintk("%s: %s inserted name: '%s', new_offset: %llu, ino: %llu, parent: %llu.\n",
- __func__, (err) ? "unsuccessfully" : "successfully",
- str->name, parent->total_len, info->ino, parent->ino);
-
- if (err && err != -EEXIST)
- goto err_out_put;
- }
- }
-
- if (new->i_state & I_NEW) {
- if (parent)
- mark_inode_dirty(&parent->vfs_inode);
- mark_inode_dirty(new);
- }
-
- set_bit(NETFS_INODE_OWNED, &npi->state);
- npi->lock_type = POHMELFS_WRITE_LOCK;
- unlock_new_inode(new);
-
- return npi;
-
-err_out_put:
- printk("%s: putting inode: %p, npi: %p, error: %d.\n", __func__, new, npi, err);
- iput(new);
-err_out_exit:
- return ERR_PTR(err);
-}
-
-static int pohmelfs_remote_sync_complete(struct page **pages, unsigned int page_num,
- void *private, int err)
-{
- struct pohmelfs_inode *pi = private;
- struct pohmelfs_sb *psb = POHMELFS_SB(pi->vfs_inode.i_sb);
-
- dprintk("%s: ino: %llu, err: %d.\n", __func__, pi->ino, err);
-
- if (err)
- pi->error = err;
- wake_up(&psb->wait);
- pohmelfs_put_inode(pi);
-
- return err;
-}
-
-/*
- * Receive directory content from the server.
- * This should be only done for objects, which were not created locally,
- * and which were not synced previously.
- */
-static int pohmelfs_sync_remote_dir(struct pohmelfs_inode *pi)
-{
- struct inode *inode = &pi->vfs_inode;
- struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
- long ret = psb->wait_on_page_timeout;
- int err;
-
- dprintk("%s: dir: %llu, state: %lx: remote_synced: %d.\n",
- __func__, pi->ino, pi->state, test_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state));
-
- if (test_bit(NETFS_INODE_REMOTE_DIR_SYNCED, &pi->state))
- return 0;
-
- if (!igrab(inode)) {
- err = -ENOENT;
- goto err_out_exit;
- }
-
- err = pohmelfs_meta_command(pi, NETFS_READDIR, NETFS_TRANS_SINGLE_DST,
- pohmelfs_remote_sync_complete, pi, 0);
- if (err)
- goto err_out_exit;
-
- pi->error = 0;
- ret = wait_event_interruptible_timeout(psb->wait,
- test_bit(NETFS_INODE_REMOTE_DIR_SYNCED, &pi->state) || pi->error, ret);
- dprintk("%s: awake dir: %llu, ret: %ld, err: %d.\n", __func__, pi->ino, ret, pi->error);
- if (ret <= 0) {
- err = ret;
- if (!err)
- err = -ETIMEDOUT;
- goto err_out_exit;
- }
-
- if (pi->error)
- return pi->error;
-
- return 0;
-
-err_out_exit:
- clear_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state);
-
- return err;
-}
-
-static int pohmelfs_dir_open(struct inode *inode, struct file *file)
-{
- file->private_data = NULL;
- return 0;
-}
-
-/*
- * VFS readdir callback. Syncs directory content from server if needed,
- * and provides direntry info to the userspace.
- */
-static int pohmelfs_readdir(struct file *file, void *dirent, filldir_t filldir)
-{
- struct inode *inode = file->f_path.dentry->d_inode;
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
- struct pohmelfs_name *n;
- struct rb_node *rb_node;
- int err = 0, mode;
- u64 len;
-
- dprintk("%s: parent: %llu, fpos: %llu, hash: %08lx.\n",
- __func__, pi->ino, (u64)file->f_pos,
- (unsigned long)file->private_data);
-#if 0
- err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
- if (err)
- return err;
-#endif
- err = pohmelfs_sync_remote_dir(pi);
- if (err)
- return err;
-
- if (file->private_data && (file->private_data == (void *)(unsigned long)file->f_pos))
- return 0;
-
- mutex_lock(&pi->offset_lock);
- n = pohmelfs_search_hash_unprecise(pi, (unsigned long)file->private_data);
-
- while (n) {
- mode = (n->mode >> 12) & 15;
-
- dprintk("%s: offset: %llu, parent ino: %llu, name: '%s', len: %u, ino: %llu, "
- "mode: %o/%o, fpos: %llu, hash: %08x.\n",
- __func__, file->f_pos, pi->ino, n->data, n->len,
- n->ino, n->mode, mode, file->f_pos, n->hash);
-
- file->private_data = (void *)(unsigned long)n->hash;
-
- len = n->len;
- err = filldir(dirent, n->data, n->len, file->f_pos, n->ino, mode);
-
- if (err < 0) {
- dprintk("%s: err: %d.\n", __func__, err);
- err = 0;
- break;
- }
-
- file->f_pos += len;
-
- rb_node = rb_next(&n->hash_node);
-
- if (!rb_node || (rb_node == &n->hash_node)) {
- file->private_data = (void *)(unsigned long)file->f_pos;
- break;
- }
-
- n = rb_entry(rb_node, struct pohmelfs_name, hash_node);
- }
- mutex_unlock(&pi->offset_lock);
-
- return err;
-}
-
-static loff_t pohmelfs_dir_lseek(struct file *file, loff_t offset, int origin)
-{
- file->f_pos = offset;
- file->private_data = NULL;
- return offset;
-}
-
-const struct file_operations pohmelfs_dir_fops = {
- .open = pohmelfs_dir_open,
- .read = generic_read_dir,
- .llseek = pohmelfs_dir_lseek,
- .readdir = pohmelfs_readdir,
-};
-
-/*
- * Lookup single object on server.
- */
-static int pohmelfs_lookup_single(struct pohmelfs_inode *parent,
- struct qstr *str, u64 ino)
-{
- struct pohmelfs_sb *psb = POHMELFS_SB(parent->vfs_inode.i_sb);
- long ret = msecs_to_jiffies(5000);
- int err;
-
- set_bit(NETFS_COMMAND_PENDING, &parent->state);
- err = pohmelfs_meta_command_data(parent, parent->ino, NETFS_LOOKUP,
- (char *)str->name, NETFS_TRANS_SINGLE_DST, NULL, NULL, ino);
- if (err)
- goto err_out_exit;
-
- err = 0;
- ret = wait_event_interruptible_timeout(psb->wait,
- !test_bit(NETFS_COMMAND_PENDING, &parent->state), ret);
- if (ret <= 0) {
- err = ret;
- if (!err)
- err = -ETIMEDOUT;
- }
-
- if (err)
- goto err_out_exit;
-
- return 0;
-
-err_out_exit:
- clear_bit(NETFS_COMMAND_PENDING, &parent->state);
-
- printk("%s: failed: parent: %llu, ino: %llu, name: '%s', err: %d.\n",
- __func__, parent->ino, ino, str->name, err);
-
- return err;
-}
-
-/*
- * VFS lookup callback.
- * We first try to get inode number from local name cache, if we have one,
- * then inode can be found in inode cache. If there is no inode or no object in
- * local cache, try to lookup it on server. This only should be done for directories,
- * which were not created locally, otherwise remote server does not know about dir at all,
- * so no need to try to know that.
- */
-struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
-{
- struct pohmelfs_inode *parent = POHMELFS_I(dir);
- struct pohmelfs_name *n;
- struct inode *inode = NULL;
- unsigned long ino = 0;
- int err, lock_type = POHMELFS_READ_LOCK, need_lock = 1;
- struct qstr str = dentry->d_name;
-
- if ((nd->intent.open.flags & O_ACCMODE) != O_RDONLY)
- lock_type = POHMELFS_WRITE_LOCK;
-
- if (test_bit(NETFS_INODE_OWNED, &parent->state)) {
- if (lock_type == parent->lock_type)
- need_lock = 0;
- if ((lock_type == POHMELFS_READ_LOCK) && (parent->lock_type == POHMELFS_WRITE_LOCK))
- need_lock = 0;
- }
-
- if ((lock_type == POHMELFS_READ_LOCK) && !test_bit(NETFS_INODE_REMOTE_DIR_SYNCED, &parent->state))
- need_lock = 1;
-
- str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0);
-
- mutex_lock(&parent->offset_lock);
- n = pohmelfs_search_hash(parent, str.hash);
- if (n)
- ino = n->ino;
- mutex_unlock(&parent->offset_lock);
-
- dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx, need_lock: %d.\n",
- __func__, ino, inode, str.name, str.hash, parent->state, need_lock);
-
- if (ino) {
- inode = ilookup(dir->i_sb, ino);
- if (inode)
- goto out;
- }
-
- dprintk("%s: no inode dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
- __func__, dir, parent->ino,
- str.name, str.len, parent->state, ino);
-
- if (!ino) {
- if (!need_lock)
- goto out;
- }
-
- err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
- if (err)
- goto out;
-
- err = pohmelfs_lookup_single(parent, &str, ino);
- if (err)
- goto out;
-
- if (!ino) {
- mutex_lock(&parent->offset_lock);
- n = pohmelfs_search_hash(parent, str.hash);
- if (n)
- ino = n->ino;
- mutex_unlock(&parent->offset_lock);
- }
-
- if (ino) {
- inode = ilookup(dir->i_sb, ino);
- dprintk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
- __func__, ino, inode, str.name, str.hash);
- if (!inode) {
- dprintk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
- __func__, ino, str.name, str.hash);
- /* return NULL; */
- return ERR_PTR(-EACCES);
- }
- } else {
- printk("%s: No inode number : name: '%s', hash: %x.\n",
- __func__, str.name, str.hash);
- }
-out:
- return d_splice_alias(inode, dentry);
-}
-
-/*
- * Create new object in local cache. Object will be synced to server
- * during writeback for given inode.
- */
-struct pohmelfs_inode *pohmelfs_create_entry_local(struct pohmelfs_sb *psb,
- struct pohmelfs_inode *parent, struct qstr *str, u64 start, umode_t mode)
-{
- struct pohmelfs_inode *npi;
- int err = -ENOMEM;
- struct netfs_inode_info info;
-
- dprintk("%s: name: '%s', mode: %ho, start: %llu.\n",
- __func__, str->name, mode, start);
-
- info.mode = mode;
- info.ino = start;
-
- if (!start)
- info.ino = pohmelfs_new_ino(psb);
-
- info.nlink = S_ISDIR(mode) ? 2 : 1;
- info.uid = current_fsuid();
- info.gid = current_fsgid();
- info.size = 0;
- info.blocksize = 512;
- info.blocks = 0;
- info.rdev = 0;
- info.version = 0;
-
- npi = pohmelfs_new_inode(psb, parent, str, &info, !!start);
- if (IS_ERR(npi)) {
- err = PTR_ERR(npi);
- goto err_out_unlock;
- }
-
- return npi;
-
-err_out_unlock:
- dprintk("%s: err: %d.\n", __func__, err);
- return ERR_PTR(err);
-}
-
-/*
- * Create local object and bind it to dentry.
- */
-static int pohmelfs_create_entry(struct inode *dir, struct dentry *dentry,
- u64 start, umode_t mode)
-{
- struct pohmelfs_sb *psb = POHMELFS_SB(dir->i_sb);
- struct pohmelfs_inode *npi, *parent;
- struct qstr str = dentry->d_name;
- int err;
-
- parent = POHMELFS_I(dir);
-
- err = pohmelfs_data_lock(parent, 0, ~0, POHMELFS_WRITE_LOCK);
- if (err)
- return err;
-
- str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0);
-
- npi = pohmelfs_create_entry_local(psb, parent, &str, start, mode);
- if (IS_ERR(npi))
- return PTR_ERR(npi);
-
- d_instantiate(dentry, &npi->vfs_inode);
-
- dprintk("%s: parent: %llu, inode: %llu, name: '%s', parent_nlink: %d, nlink: %d.\n",
- __func__, parent->ino, npi->ino, dentry->d_name.name,
- (signed)dir->i_nlink, (signed)npi->vfs_inode.i_nlink);
-
- return 0;
-}
-
-/*
- * VFS create and mkdir callbacks.
- */
-static int pohmelfs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
- struct nameidata *nd)
-{
- return pohmelfs_create_entry(dir, dentry, 0, mode);
-}
-
-static int pohmelfs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
-{
- int err;
-
- inode_inc_link_count(dir);
- err = pohmelfs_create_entry(dir, dentry, 0, mode | S_IFDIR);
- if (err)
- inode_dec_link_count(dir);
-
- return err;
-}
-
-static int pohmelfs_remove_entry(struct inode *dir, struct dentry *dentry)
-{
- struct pohmelfs_sb *psb = POHMELFS_SB(dir->i_sb);
- struct inode *inode = dentry->d_inode;
- struct pohmelfs_inode *parent = POHMELFS_I(dir), *pi = POHMELFS_I(inode);
- struct pohmelfs_name *n;
- int err = -ENOENT;
- struct qstr str = dentry->d_name;
-
- err = pohmelfs_data_lock(parent, 0, ~0, POHMELFS_WRITE_LOCK);
- if (err)
- return err;
-
- str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0);
-
- dprintk("%s: dir_ino: %llu, inode: %llu, name: '%s', nlink: %d.\n",
- __func__, parent->ino, pi->ino,
- str.name, (signed)inode->i_nlink);
-
- BUG_ON(!inode);
-
- mutex_lock(&parent->offset_lock);
- n = pohmelfs_search_hash(parent, str.hash);
- if (n) {
- pohmelfs_fix_offset(parent, n);
- if (test_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state))
- pohmelfs_remove_child(pi, n);
-
- pohmelfs_name_free(parent, n);
- err = 0;
- }
- mutex_unlock(&parent->offset_lock);
-
- if (!err) {
- psb->avail_size += inode->i_size;
-
- pohmelfs_inode_del_inode(psb, pi);
-
- mark_inode_dirty(dir);
-
- inode->i_ctime = dir->i_ctime;
- if (inode->i_nlink)
- inode_dec_link_count(inode);
- }
-
- return err;
-}
-
-/*
- * Unlink and rmdir VFS callbacks.
- */
-static int pohmelfs_unlink(struct inode *dir, struct dentry *dentry)
-{
- return pohmelfs_remove_entry(dir, dentry);
-}
-
-static int pohmelfs_rmdir(struct inode *dir, struct dentry *dentry)
-{
- int err;
- struct inode *inode = dentry->d_inode;
-
- dprintk("%s: parent: %llu, inode: %llu, name: '%s', parent_nlink: %d, nlink: %d.\n",
- __func__, POHMELFS_I(dir)->ino, POHMELFS_I(inode)->ino,
- dentry->d_name.name, (signed)dir->i_nlink, (signed)inode->i_nlink);
-
- err = pohmelfs_remove_entry(dir, dentry);
- if (!err) {
- inode_dec_link_count(dir);
- inode_dec_link_count(inode);
- }
-
- return err;
-}
-
-/*
- * Link creation is synchronous.
- * I'm lazy.
- * Earth is somewhat round.
- */
-static int pohmelfs_create_link(struct pohmelfs_inode *parent, struct qstr *obj,
- struct pohmelfs_inode *target, struct qstr *tstr)
-{
- struct super_block *sb = parent->vfs_inode.i_sb;
- struct pohmelfs_sb *psb = POHMELFS_SB(sb);
- struct netfs_cmd *cmd;
- struct netfs_trans *t;
- void *data;
- int err, parent_len, target_len = 0, cur_len, path_size = 0;
-
- err = pohmelfs_data_lock(parent, 0, ~0, POHMELFS_WRITE_LOCK);
- if (err)
- return err;
-
- err = sb->s_op->write_inode(&parent->vfs_inode, 0);
- if (err)
- goto err_out_exit;
-
- if (tstr)
- target_len = tstr->len;
-
- parent_len = pohmelfs_path_length(parent);
- if (target)
- target_len += pohmelfs_path_length(target);
-
- if (parent_len < 0) {
- err = parent_len;
- goto err_out_exit;
- }
-
- if (target_len < 0) {
- err = target_len;
- goto err_out_exit;
- }
-
- t = netfs_trans_alloc(psb, parent_len + target_len + obj->len + 2, 0, 0);
- if (!t) {
- err = -ENOMEM;
- goto err_out_exit;
- }
- cur_len = netfs_trans_cur_len(t);
-
- cmd = netfs_trans_current(t);
- if (IS_ERR(cmd)) {
- err = PTR_ERR(cmd);
- goto err_out_free;
- }
-
- data = (void *)(cmd + 1);
- cur_len -= sizeof(struct netfs_cmd);
-
- err = pohmelfs_construct_path_string(parent, data, parent_len);
- if (err > 0) {
- /* Do not place null-byte before the slash */
- path_size = err - 1;
- cur_len -= path_size;
-
- err = snprintf(data + path_size, cur_len, "/%s|", obj->name);
-
- path_size += err;
- cur_len -= err;
-
- cmd->ext = path_size - 1; /* No | symbol */
-
- if (target) {
- err = pohmelfs_construct_path_string(target, data + path_size, target_len);
- if (err > 0) {
- path_size += err;
- cur_len -= err;
- }
- }
- }
-
- if (err < 0)
- goto err_out_free;
-
- cmd->start = 0;
-
- if (!target && tstr) {
- if (tstr->len > cur_len - 1) {
- err = -ENAMETOOLONG;
- goto err_out_free;
- }
-
- err = snprintf(data + path_size, cur_len, "%s", tstr->name) + 1; /* 0-byte */
- path_size += err;
- cur_len -= err;
- cmd->start = 1;
- }
-
- dprintk("%s: parent: %llu, obj: '%s', target_inode: %llu, target_str: '%s', full: '%s'.\n",
- __func__, parent->ino, obj->name, (target) ? target->ino : 0, (tstr) ? tstr->name : NULL,
- (char *)data);
-
- cmd->cmd = NETFS_LINK;
- cmd->size = path_size;
- cmd->id = parent->ino;
-
- netfs_convert_cmd(cmd);
-
- netfs_trans_update(cmd, t, path_size);
-
- err = netfs_trans_finish(t, psb);
- if (err)
- goto err_out_exit;
-
- return 0;
-
-err_out_free:
- t->result = err;
- netfs_trans_put(t);
-err_out_exit:
- return err;
-}
-
-/*
- * VFS hard and soft link callbacks.
- */
-static int pohmelfs_link(struct dentry *old_dentry, struct inode *dir,
- struct dentry *dentry)
-{
- struct inode *inode = old_dentry->d_inode;
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
- int err;
- struct qstr str = dentry->d_name;
-
- str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0);
-
- err = inode->i_sb->s_op->write_inode(inode, 0);
- if (err)
- return err;
-
- err = pohmelfs_create_link(POHMELFS_I(dir), &str, pi, NULL);
- if (err)
- return err;
-
- return pohmelfs_create_entry(dir, dentry, pi->ino, inode->i_mode);
-}
-
-static int pohmelfs_symlink(struct inode *dir, struct dentry *dentry, const char *symname)
-{
- struct qstr sym_str;
- struct qstr str = dentry->d_name;
- struct inode *inode;
- int err;
-
- str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0);
-
- sym_str.name = symname;
- sym_str.len = strlen(symname);
-
- err = pohmelfs_create_link(POHMELFS_I(dir), &str, NULL, &sym_str);
- if (err)
- goto err_out_exit;
-
- err = pohmelfs_create_entry(dir, dentry, 0, S_IFLNK | S_IRWXU | S_IRWXG | S_IRWXO);
- if (err)
- goto err_out_exit;
-
- inode = dentry->d_inode;
-
- err = page_symlink(inode, symname, sym_str.len + 1);
- if (err)
- goto err_out_put;
-
- return 0;
-
-err_out_put:
- iput(inode);
-err_out_exit:
- return err;
-}
-
-static int pohmelfs_send_rename(struct pohmelfs_inode *pi, struct pohmelfs_inode *parent,
- struct qstr *str)
-{
- int path_len, err, total_len = 0, inode_len, parent_len;
- char *path;
- struct netfs_trans *t;
- struct netfs_cmd *cmd;
- struct pohmelfs_sb *psb = POHMELFS_SB(pi->vfs_inode.i_sb);
-
- parent_len = pohmelfs_path_length(parent);
- inode_len = pohmelfs_path_length(pi);
-
- if (parent_len < 0 || inode_len < 0)
- return -EINVAL;
-
- path_len = parent_len + inode_len + str->len + 3;
-
- t = netfs_trans_alloc(psb, path_len, 0, 0);
- if (!t)
- return -ENOMEM;
-
- cmd = netfs_trans_current(t);
- path = (char *)(cmd + 1);
-
- err = pohmelfs_construct_path_string(pi, path, inode_len);
- if (err < 0)
- goto err_out_unlock;
-
- cmd->ext = err;
-
- path += err;
- total_len += err;
- path_len -= err;
-
- *path = '|';
- path++;
- total_len++;
- path_len--;
-
- err = pohmelfs_construct_path_string(parent, path, parent_len);
- if (err < 0)
- goto err_out_unlock;
-
- /*
- * Do not place a null-byte before the final slash and the name.
- */
- err--;
- path += err;
- total_len += err;
- path_len -= err;
-
- err = snprintf(path, path_len - 1, "/%s", str->name);
-
- total_len += err + 1; /* 0 symbol */
- path_len -= err + 1;
-
- cmd->cmd = NETFS_RENAME;
- cmd->id = pi->ino;
- cmd->start = parent->ino;
- cmd->size = total_len;
-
- netfs_convert_cmd(cmd);
-
- netfs_trans_update(cmd, t, total_len);
-
- return netfs_trans_finish(t, psb);
-
-err_out_unlock:
- netfs_trans_free(t);
- return err;
-}
-
-static int pohmelfs_rename(struct inode *old_dir, struct dentry *old_dentry,
- struct inode *new_dir, struct dentry *new_dentry)
-{
- struct inode *inode = old_dentry->d_inode;
- struct pohmelfs_inode *old_parent, *pi, *new_parent;
- struct qstr str = new_dentry->d_name;
- struct pohmelfs_name *n;
- unsigned int old_hash;
- int err = -ENOENT;
-
- pi = POHMELFS_I(inode);
- old_parent = POHMELFS_I(old_dir);
-
- if (new_dir)
- new_dir->i_sb->s_op->write_inode(new_dir, 0);
-
- old_hash = jhash(old_dentry->d_name.name, old_dentry->d_name.len, 0);
- str.hash = jhash(new_dentry->d_name.name, new_dentry->d_name.len, 0);
-
- str.len = new_dentry->d_name.len;
- str.name = new_dentry->d_name.name;
- str.hash = jhash(new_dentry->d_name.name, new_dentry->d_name.len, 0);
-
- if (new_dir) {
- new_parent = POHMELFS_I(new_dir);
- err = -ENOTEMPTY;
-
- if (S_ISDIR(inode->i_mode) &&
- new_parent->total_len <= 3)
- goto err_out_exit;
- } else {
- new_parent = old_parent;
- }
-
- dprintk("%s: ino: %llu, parent: %llu, name: '%s' -> parent: %llu, name: '%s', i_size: %llu.\n",
- __func__, pi->ino, old_parent->ino, old_dentry->d_name.name,
- new_parent->ino, new_dentry->d_name.name, inode->i_size);
-
- if (test_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state) &&
- test_bit(NETFS_INODE_OWNED, &pi->state)) {
- err = pohmelfs_send_rename(pi, new_parent, &str);
- if (err)
- goto err_out_exit;
- }
-
- n = pohmelfs_name_alloc(str.len + 1);
- if (!n)
- goto err_out_exit;
-
- mutex_lock(&new_parent->offset_lock);
- n->ino = pi->ino;
- n->mode = inode->i_mode;
- n->len = str.len;
- n->hash = str.hash;
- sprintf(n->data, "%s", str.name);
-
- err = pohmelfs_insert_name(new_parent, n);
- mutex_unlock(&new_parent->offset_lock);
-
- if (err)
- goto err_out_exit;
-
- mutex_lock(&old_parent->offset_lock);
- n = pohmelfs_search_hash(old_parent, old_hash);
- if (n)
- pohmelfs_name_del(old_parent, n);
- mutex_unlock(&old_parent->offset_lock);
-
- mark_inode_dirty(inode);
- mark_inode_dirty(&new_parent->vfs_inode);
-
- WARN_ON_ONCE(list_empty(&inode->i_dentry));
-
- return 0;
-
-err_out_exit:
-
- clear_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state);
-
- return err;
-}
-
-/*
- * POHMELFS directory inode operations.
- */
-const struct inode_operations pohmelfs_dir_inode_ops = {
- .link = pohmelfs_link,
- .symlink = pohmelfs_symlink,
- .unlink = pohmelfs_unlink,
- .mkdir = pohmelfs_mkdir,
- .rmdir = pohmelfs_rmdir,
- .create = pohmelfs_create,
- .lookup = pohmelfs_lookup,
- .setattr = pohmelfs_setattr,
- .rename = pohmelfs_rename,
-};
+++ /dev/null
-/*
- * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/backing-dev.h>
-#include <linux/crypto.h>
-#include <linux/fs.h>
-#include <linux/jhash.h>
-#include <linux/hash.h>
-#include <linux/ktime.h>
-#include <linux/mm.h>
-#include <linux/mount.h>
-#include <linux/pagemap.h>
-#include <linux/pagevec.h>
-#include <linux/parser.h>
-#include <linux/swap.h>
-#include <linux/slab.h>
-#include <linux/statfs.h>
-#include <linux/writeback.h>
-#include <linux/prefetch.h>
-
-#include "netfs.h"
-
-#define POHMELFS_MAGIC_NUM 0x504f482e
-
-static struct kmem_cache *pohmelfs_inode_cache;
-static atomic_t psb_bdi_num = ATOMIC_INIT(0);
-
-/*
- * Removes inode from all trees, drops local name cache and removes all queued
- * requests for object removal.
- */
-void pohmelfs_inode_del_inode(struct pohmelfs_sb *psb, struct pohmelfs_inode *pi)
-{
- mutex_lock(&pi->offset_lock);
- pohmelfs_free_names(pi);
- mutex_unlock(&pi->offset_lock);
-
- dprintk("%s: deleted stuff in ino: %llu.\n", __func__, pi->ino);
-}
-
-/*
- * Sync inode to server.
- * Returns zero in success and negative error value otherwise.
- * It will gather path to root directory into structures containing
- * creation mode, permissions and names, so that the whole path
- * to given inode could be created using only single network command.
- */
-int pohmelfs_write_inode_create(struct inode *inode, struct netfs_trans *trans)
-{
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
- int err = -ENOMEM, size;
- struct netfs_cmd *cmd;
- void *data;
- int cur_len = netfs_trans_cur_len(trans);
-
- if (unlikely(cur_len < 0))
- return -ETOOSMALL;
-
- cmd = netfs_trans_current(trans);
- cur_len -= sizeof(struct netfs_cmd);
-
- data = (void *)(cmd + 1);
-
- err = pohmelfs_construct_path_string(pi, data, cur_len);
- if (err < 0)
- goto err_out_exit;
-
- size = err;
-
- cmd->start = i_size_read(inode);
- cmd->cmd = NETFS_CREATE;
- cmd->size = size;
- cmd->id = pi->ino;
- cmd->ext = inode->i_mode;
-
- netfs_convert_cmd(cmd);
-
- netfs_trans_update(cmd, trans, size);
-
- return 0;
-
-err_out_exit:
- printk("%s: completed ino: %llu, err: %d.\n", __func__, pi->ino, err);
- return err;
-}
-
-static int pohmelfs_write_trans_complete(struct page **pages, unsigned int page_num,
- void *private, int err)
-{
- unsigned i;
-
- dprintk("%s: pages: %lu-%lu, page_num: %u, err: %d.\n",
- __func__, pages[0]->index, pages[page_num-1]->index,
- page_num, err);
-
- for (i = 0; i < page_num; i++) {
- struct page *page = pages[i];
-
- if (!page)
- continue;
-
- end_page_writeback(page);
-
- if (err < 0) {
- SetPageError(page);
- set_page_dirty(page);
- }
-
- unlock_page(page);
- page_cache_release(page);
-
- /* dprintk("%s: %3u/%u: page: %p.\n", __func__, i, page_num, page); */
- }
- return err;
-}
-
-static int pohmelfs_inode_has_dirty_pages(struct address_space *mapping, pgoff_t index)
-{
- int ret;
- struct page *page;
-
- rcu_read_lock();
- ret = radix_tree_gang_lookup_tag(&mapping->page_tree,
- (void **)&page, index, 1, PAGECACHE_TAG_DIRTY);
- rcu_read_unlock();
- return ret;
-}
-
-static int pohmelfs_writepages(struct address_space *mapping, struct writeback_control *wbc)
-{
- struct inode *inode = mapping->host;
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
- struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
- int err = 0;
- int done = 0;
- int nr_pages;
- pgoff_t index;
- pgoff_t end; /* Inclusive */
- int scanned = 0;
- int range_whole = 0;
-
- if (wbc->range_cyclic) {
- index = mapping->writeback_index; /* Start from prev offset */
- end = -1;
- } else {
- index = wbc->range_start >> PAGE_CACHE_SHIFT;
- end = wbc->range_end >> PAGE_CACHE_SHIFT;
- if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
- range_whole = 1;
- scanned = 1;
- }
-retry:
- while (!done && (index <= end)) {
- unsigned int i = min(end - index, (pgoff_t)psb->trans_max_pages);
- int path_len;
- struct netfs_trans *trans;
-
- err = pohmelfs_inode_has_dirty_pages(mapping, index);
- if (!err)
- break;
-
- err = pohmelfs_path_length(pi);
- if (err < 0)
- break;
-
- path_len = err;
-
- if (path_len <= 2) {
- err = -ENOENT;
- break;
- }
-
- trans = netfs_trans_alloc(psb, path_len, 0, i);
- if (!trans) {
- err = -ENOMEM;
- break;
- }
- trans->complete = &pohmelfs_write_trans_complete;
-
- trans->page_num = nr_pages = find_get_pages_tag(mapping, &index,
- PAGECACHE_TAG_DIRTY, trans->page_num,
- trans->pages);
-
- dprintk("%s: t: %p, nr_pages: %u, end: %lu, index: %lu, max: %u.\n",
- __func__, trans, nr_pages, end, index, trans->page_num);
-
- if (!nr_pages)
- goto err_out_reset;
-
- err = pohmelfs_write_inode_create(inode, trans);
- if (err)
- goto err_out_reset;
-
- err = 0;
- scanned = 1;
-
- for (i = 0; i < trans->page_num; i++) {
- struct page *page = trans->pages[i];
-
- lock_page(page);
-
- if (unlikely(page->mapping != mapping))
- goto out_continue;
-
- if (!wbc->range_cyclic && page->index > end) {
- done = 1;
- goto out_continue;
- }
-
- if (wbc->sync_mode != WB_SYNC_NONE)
- wait_on_page_writeback(page);
-
- if (PageWriteback(page) ||
- !clear_page_dirty_for_io(page)) {
- dprintk("%s: not clear for io page: %p, writeback: %d.\n",
- __func__, page, PageWriteback(page));
- goto out_continue;
- }
-
- set_page_writeback(page);
-
- trans->attached_size += page_private(page);
- trans->attached_pages++;
-#if 0
- dprintk("%s: %u/%u added trans: %p, gen: %u, page: %p, [High: %d], size: %lu, idx: %lu.\n",
- __func__, i, trans->page_num, trans, trans->gen, page,
- !!PageHighMem(page), page_private(page), page->index);
-#endif
- wbc->nr_to_write--;
-
- if (wbc->nr_to_write <= 0)
- done = 1;
-
- continue;
-out_continue:
- unlock_page(page);
- trans->pages[i] = NULL;
- }
-
- err = netfs_trans_finish(trans, psb);
- if (err)
- break;
-
- continue;
-
-err_out_reset:
- trans->result = err;
- netfs_trans_reset(trans);
- netfs_trans_put(trans);
- break;
- }
-
- if (!scanned && !done) {
- /*
- * We hit the last page and there is more work to be done: wrap
- * back to the start of the file
- */
- scanned = 1;
- index = 0;
- goto retry;
- }
-
- if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
- mapping->writeback_index = index;
-
- return err;
-}
-
-/*
- * Inode writeback creation completion callback.
- * Only invoked for just created inodes, which do not have pages attached,
- * like dirs and empty files.
- */
-static int pohmelfs_write_inode_complete(struct page **pages, unsigned int page_num,
- void *private, int err)
-{
- struct inode *inode = private;
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
-
- if (inode) {
- if (err) {
- mark_inode_dirty(inode);
- clear_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state);
- } else {
- set_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state);
- }
-
- pohmelfs_put_inode(pi);
- }
-
- return err;
-}
-
-int pohmelfs_write_create_inode(struct pohmelfs_inode *pi)
-{
- struct netfs_trans *t;
- struct inode *inode = &pi->vfs_inode;
- struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
- int err;
-
- if (test_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state))
- return 0;
-
- dprintk("%s: started ino: %llu.\n", __func__, pi->ino);
-
- err = pohmelfs_path_length(pi);
- if (err < 0)
- goto err_out_exit;
-
- t = netfs_trans_alloc(psb, err + 1, 0, 0);
- if (!t) {
- err = -ENOMEM;
- goto err_out_exit;
- }
- t->complete = pohmelfs_write_inode_complete;
- t->private = igrab(inode);
- if (!t->private) {
- err = -ENOENT;
- goto err_out_put;
- }
-
- err = pohmelfs_write_inode_create(inode, t);
- if (err)
- goto err_out_put;
-
- netfs_trans_finish(t, POHMELFS_SB(inode->i_sb));
-
- return 0;
-
-err_out_put:
- t->result = err;
- netfs_trans_put(t);
-err_out_exit:
- return err;
-}
-
-/*
- * Sync all not-yet-created children in given directory to the server.
- */
-static int pohmelfs_write_inode_create_children(struct inode *inode)
-{
- struct pohmelfs_inode *parent = POHMELFS_I(inode);
- struct super_block *sb = inode->i_sb;
- struct pohmelfs_name *n;
-
- while (!list_empty(&parent->sync_create_list)) {
- n = NULL;
- mutex_lock(&parent->offset_lock);
- if (!list_empty(&parent->sync_create_list)) {
- n = list_first_entry(&parent->sync_create_list,
- struct pohmelfs_name, sync_create_entry);
- list_del_init(&n->sync_create_entry);
- }
- mutex_unlock(&parent->offset_lock);
-
- if (!n)
- break;
-
- inode = ilookup(sb, n->ino);
-
- dprintk("%s: parent: %llu, ino: %llu, inode: %p.\n",
- __func__, parent->ino, n->ino, inode);
-
- if (inode && (inode->i_state & I_DIRTY)) {
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
- pohmelfs_write_create_inode(pi);
- /* pohmelfs_meta_command(pi, NETFS_INODE_INFO, 0, NULL, NULL, 0); */
- iput(inode);
- }
- }
-
- return 0;
-}
-
-/*
- * Removes given child from given inode on server.
- */
-int pohmelfs_remove_child(struct pohmelfs_inode *pi, struct pohmelfs_name *n)
-{
- return pohmelfs_meta_command_data(pi, pi->ino, NETFS_REMOVE, NULL, 0, NULL, NULL, 0);
-}
-
-/*
- * Writeback for given inode.
- */
-static int pohmelfs_write_inode(struct inode *inode,
- struct writeback_control *wbc)
-{
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
-
- pohmelfs_write_create_inode(pi);
- pohmelfs_write_inode_create_children(inode);
-
- return 0;
-}
-
-/*
- * It is not exported, sorry...
- */
-static inline wait_queue_head_t *page_waitqueue(struct page *page)
-{
- const struct zone *zone = page_zone(page);
-
- return &zone->wait_table[hash_ptr(page, zone->wait_table_bits)];
-}
-
-static int pohmelfs_wait_on_page_locked(struct page *page)
-{
- struct pohmelfs_sb *psb = POHMELFS_SB(page->mapping->host->i_sb);
- long ret = psb->wait_on_page_timeout;
- DEFINE_WAIT_BIT(wait, &page->flags, PG_locked);
- int err = 0;
-
- if (!PageLocked(page))
- return 0;
-
- for (;;) {
- prepare_to_wait(page_waitqueue(page),
- &wait.wait, TASK_INTERRUPTIBLE);
-
- dprintk("%s: page: %p, locked: %d, uptodate: %d, error: %d, flags: %lx.\n",
- __func__, page, PageLocked(page), PageUptodate(page),
- PageError(page), page->flags);
-
- if (!PageLocked(page))
- break;
-
- if (!signal_pending(current)) {
- ret = schedule_timeout(ret);
- if (!ret)
- break;
- continue;
- }
- ret = -ERESTARTSYS;
- break;
- }
- finish_wait(page_waitqueue(page), &wait.wait);
-
- if (!ret)
- err = -ETIMEDOUT;
-
-
- if (!err)
- SetPageUptodate(page);
-
- if (err)
- printk("%s: page: %p, uptodate: %d, locked: %d, err: %d.\n",
- __func__, page, PageUptodate(page), PageLocked(page), err);
-
- return err;
-}
-
-static int pohmelfs_read_page_complete(struct page **pages, unsigned int page_num,
- void *private, int err)
-{
- struct page *page = private;
-
- if (PageChecked(page))
- return err;
-
- if (err < 0) {
- dprintk("%s: page: %p, err: %d.\n", __func__, page, err);
- SetPageError(page);
- }
-
- unlock_page(page);
-
- return err;
-}
-
-/*
- * Read a page from remote server.
- * Function will wait until page is unlocked.
- */
-static int pohmelfs_readpage(struct file *file, struct page *page)
-{
- struct inode *inode = page->mapping->host;
- struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
- struct netfs_trans *t;
- struct netfs_cmd *cmd;
- int err, path_len;
- void *data;
- u64 isize;
-
- err = pohmelfs_data_lock(pi, page->index << PAGE_CACHE_SHIFT,
- PAGE_SIZE, POHMELFS_READ_LOCK);
- if (err)
- goto err_out_exit;
-
- isize = i_size_read(inode);
- if (isize <= page->index << PAGE_CACHE_SHIFT) {
- SetPageUptodate(page);
- unlock_page(page);
- return 0;
- }
-
- path_len = pohmelfs_path_length(pi);
- if (path_len < 0) {
- err = path_len;
- goto err_out_exit;
- }
-
- t = netfs_trans_alloc(psb, path_len, NETFS_TRANS_SINGLE_DST, 0);
- if (!t) {
- err = -ENOMEM;
- goto err_out_exit;
- }
-
- t->complete = pohmelfs_read_page_complete;
- t->private = page;
-
- cmd = netfs_trans_current(t);
- data = (void *)(cmd + 1);
-
- err = pohmelfs_construct_path_string(pi, data, path_len);
- if (err < 0)
- goto err_out_free;
-
- path_len = err;
-
- cmd->id = pi->ino;
- cmd->start = page->index;
- cmd->start <<= PAGE_CACHE_SHIFT;
- cmd->size = PAGE_CACHE_SIZE + path_len;
- cmd->cmd = NETFS_READ_PAGE;
- cmd->ext = path_len;
-
- dprintk("%s: path: '%s', page: %p, ino: %llu, start: %llu, size: %lu.\n",
- __func__, (char *)data, page, pi->ino, cmd->start, PAGE_CACHE_SIZE);
-
- netfs_convert_cmd(cmd);
- netfs_trans_update(cmd, t, path_len);
-
- err = netfs_trans_finish(t, psb);
- if (err)
- goto err_out_return;
-
- return pohmelfs_wait_on_page_locked(page);
-
-err_out_free:
- t->result = err;
- netfs_trans_put(t);
-err_out_exit:
- SetPageError(page);
- if (PageLocked(page))
- unlock_page(page);
-err_out_return:
- printk("%s: page: %p, start: %lu, size: %lu, err: %d.\n",
- __func__, page, page->index << PAGE_CACHE_SHIFT, PAGE_CACHE_SIZE, err);
-
- return err;
-}
-
-/*
- * Write begin/end magic.
- * Allocates a page and writes inode if it was not synced to server before.
- */
-static int pohmelfs_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata)
-{
- struct inode *inode = mapping->host;
- struct page *page;
- pgoff_t index;
- unsigned start, end;
- int err;
-
- *pagep = NULL;
-
- index = pos >> PAGE_CACHE_SHIFT;
- start = pos & (PAGE_CACHE_SIZE - 1);
- end = start + len;
-
- page = grab_cache_page(mapping, index);
-#if 0
- dprintk("%s: page: %p pos: %llu, len: %u, index: %lu, start: %u, end: %u, uptodate: %d.\n",
- __func__, page, pos, len, index, start, end, PageUptodate(page));
-#endif
- if (!page) {
- err = -ENOMEM;
- goto err_out_exit;
- }
-
- while (!PageUptodate(page)) {
- if (start && test_bit(NETFS_INODE_REMOTE_SYNCED, &POHMELFS_I(inode)->state)) {
- err = pohmelfs_readpage(file, page);
- if (err)
- goto err_out_exit;
-
- lock_page(page);
- continue;
- }
-
- if (len != PAGE_CACHE_SIZE) {
- void *kaddr = kmap_atomic(page, KM_USER0);
-
- memset(kaddr + start, 0, PAGE_CACHE_SIZE - start);
- flush_dcache_page(page);
- kunmap_atomic(kaddr, KM_USER0);
- }
- SetPageUptodate(page);
- }
-
- set_page_private(page, end);
-
- *pagep = page;
-
- return 0;
-
-err_out_exit:
- page_cache_release(page);
- *pagep = NULL;
-
- return err;
-}
-
-static int pohmelfs_write_end(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned copied,
- struct page *page, void *fsdata)
-{
- struct inode *inode = mapping->host;
-
- if (copied != len) {
- unsigned from = pos & (PAGE_CACHE_SIZE - 1);
- void *kaddr = kmap_atomic(page, KM_USER0);
-
- memset(kaddr + from + copied, 0, len - copied);
- flush_dcache_page(page);
- kunmap_atomic(kaddr, KM_USER0);
- }
-
- SetPageUptodate(page);
- set_page_dirty(page);
-#if 0
- dprintk("%s: page: %p [U: %d, D: %d, L: %d], pos: %llu, len: %u, copied: %u.\n",
- __func__, page,
- PageUptodate(page), PageDirty(page), PageLocked(page),
- pos, len, copied);
-#endif
- flush_dcache_page(page);
-
- unlock_page(page);
- page_cache_release(page);
-
- if (pos + copied > inode->i_size) {
- struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
-
- psb->avail_size -= pos + copied - inode->i_size;
-
- i_size_write(inode, pos + copied);
- }
-
- return copied;
-}
-
-static int pohmelfs_readpages_trans_complete(struct page **__pages, unsigned int page_num,
- void *private, int err)
-{
- struct pohmelfs_inode *pi = private;
- unsigned int i, num;
- struct page **pages, *page = (struct page *)__pages;
- loff_t index = page->index;
-
- pages = kzalloc(sizeof(void *) * page_num, GFP_NOIO);
- if (!pages)
- return -ENOMEM;
-
- num = find_get_pages_contig(pi->vfs_inode.i_mapping, index, page_num, pages);
- if (num <= 0) {
- err = num;
- goto err_out_free;
- }
-
- for (i = 0; i < num; ++i) {
- page = pages[i];
-
- if (err)
- printk("%s: %u/%u: page: %p, index: %lu, uptodate: %d, locked: %d, err: %d.\n",
- __func__, i, num, page, page->index,
- PageUptodate(page), PageLocked(page), err);
-
- if (!PageChecked(page)) {
- if (err < 0)
- SetPageError(page);
- unlock_page(page);
- }
- page_cache_release(page);
- page_cache_release(page);
- }
-
-err_out_free:
- kfree(pages);
- return err;
-}
-
-static int pohmelfs_send_readpages(struct pohmelfs_inode *pi, struct page *first, unsigned int num)
-{
- struct netfs_trans *t;
- struct netfs_cmd *cmd;
- struct pohmelfs_sb *psb = POHMELFS_SB(pi->vfs_inode.i_sb);
- int err, path_len;
- void *data;
-
- err = pohmelfs_data_lock(pi, first->index << PAGE_CACHE_SHIFT,
- num * PAGE_SIZE, POHMELFS_READ_LOCK);
- if (err)
- goto err_out_exit;
-
- path_len = pohmelfs_path_length(pi);
- if (path_len < 0) {
- err = path_len;
- goto err_out_exit;
- }
-
- t = netfs_trans_alloc(psb, path_len, NETFS_TRANS_SINGLE_DST, 0);
- if (!t) {
- err = -ENOMEM;
- goto err_out_exit;
- }
-
- cmd = netfs_trans_current(t);
- data = (void *)(cmd + 1);
-
- t->complete = pohmelfs_readpages_trans_complete;
- t->private = pi;
- t->page_num = num;
- t->pages = (struct page **)first;
-
- err = pohmelfs_construct_path_string(pi, data, path_len);
- if (err < 0)
- goto err_out_put;
-
- path_len = err;
-
- cmd->cmd = NETFS_READ_PAGES;
- cmd->start = first->index;
- cmd->start <<= PAGE_CACHE_SHIFT;
- cmd->size = (num << 8 | PAGE_CACHE_SHIFT);
- cmd->id = pi->ino;
- cmd->ext = path_len;
-
- dprintk("%s: t: %p, gen: %u, path: '%s', path_len: %u, "
- "start: %lu, num: %u.\n",
- __func__, t, t->gen, (char *)data, path_len,
- first->index, num);
-
- netfs_convert_cmd(cmd);
- netfs_trans_update(cmd, t, path_len);
-
- return netfs_trans_finish(t, psb);
-
-err_out_put:
- netfs_trans_free(t);
-err_out_exit:
- pohmelfs_readpages_trans_complete((struct page **)first, num, pi, err);
- return err;
-}
-
-#define list_to_page(head) (list_entry((head)->prev, struct page, lru))
-
-static int pohmelfs_readpages(struct file *file, struct address_space *mapping,
- struct list_head *pages, unsigned nr_pages)
-{
- unsigned int page_idx, num = 0;
- struct page *page = NULL, *first = NULL;
-
- for (page_idx = 0; page_idx < nr_pages; page_idx++) {
- page = list_to_page(pages);
-
- prefetchw(&page->flags);
- list_del(&page->lru);
-
- if (!add_to_page_cache_lru(page, mapping,
- page->index, GFP_KERNEL)) {
-
- if (!num) {
- num = 1;
- first = page;
- continue;
- }
-
- dprintk("%s: added to lru page: %p, page_index: %lu, first_index: %lu.\n",
- __func__, page, page->index, first->index);
-
- if (unlikely(first->index + num != page->index) || (num > 500)) {
- pohmelfs_send_readpages(POHMELFS_I(mapping->host),
- first, num);
- first = page;
- num = 0;
- }
-
- num++;
- }
- }
- pohmelfs_send_readpages(POHMELFS_I(mapping->host), first, num);
-
- /*
- * This will be sync read, so when last page is processed,
- * all previous are alerady unlocked and ready to be used.
- */
- return 0;
-}
-
-/*
- * Small address space operations for POHMELFS.
- */
-const struct address_space_operations pohmelfs_aops = {
- .readpage = pohmelfs_readpage,
- .readpages = pohmelfs_readpages,
- .writepages = pohmelfs_writepages,
- .write_begin = pohmelfs_write_begin,
- .write_end = pohmelfs_write_end,
- .set_page_dirty = __set_page_dirty_nobuffers,
-};
-
-static void pohmelfs_i_callback(struct rcu_head *head)
-{
- struct inode *inode = container_of(head, struct inode, i_rcu);
- kmem_cache_free(pohmelfs_inode_cache, POHMELFS_I(inode));
-}
-
-/*
- * ->destroy_inode() callback. Deletes inode from the caches
- * and frees private data.
- */
-static void pohmelfs_destroy_inode(struct inode *inode)
-{
- struct super_block *sb = inode->i_sb;
- struct pohmelfs_sb *psb = POHMELFS_SB(sb);
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
-
- /* pohmelfs_data_unlock(pi, 0, inode->i_size, POHMELFS_READ_LOCK); */
-
- pohmelfs_inode_del_inode(psb, pi);
-
- dprintk("%s: pi: %p, inode: %p, ino: %llu.\n",
- __func__, pi, &pi->vfs_inode, pi->ino);
- atomic_long_dec(&psb->total_inodes);
- call_rcu(&inode->i_rcu, pohmelfs_i_callback);
-}
-
-/*
- * ->alloc_inode() callback. Allocates inode and initializes private data.
- */
-static struct inode *pohmelfs_alloc_inode(struct super_block *sb)
-{
- struct pohmelfs_inode *pi;
-
- pi = kmem_cache_alloc(pohmelfs_inode_cache, GFP_NOIO);
- if (!pi)
- return NULL;
-
- pi->hash_root = RB_ROOT;
- mutex_init(&pi->offset_lock);
-
- INIT_LIST_HEAD(&pi->sync_create_list);
-
- INIT_LIST_HEAD(&pi->inode_entry);
-
- pi->lock_type = 0;
- pi->state = 0;
- pi->total_len = 0;
- pi->drop_count = 0;
-
- dprintk("%s: pi: %p, inode: %p.\n", __func__, pi, &pi->vfs_inode);
-
- atomic_long_inc(&POHMELFS_SB(sb)->total_inodes);
-
- return &pi->vfs_inode;
-}
-
-/*
- * We want fsync() to work on POHMELFS.
- */
-static int pohmelfs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
-{
- struct inode *inode = file->f_mapping->host;
- int err = filemap_write_and_wait_range(inode->i_mapping, start, end);
- if (!err) {
- mutex_lock(&inode->i_mutex);
- err = sync_inode_metadata(inode, 1);
- mutex_unlock(&inode->i_mutex);
- }
- return err;
-}
-
-ssize_t pohmelfs_write(struct file *file, const char __user *buf,
- size_t len, loff_t *ppos)
-{
- struct address_space *mapping = file->f_mapping;
- struct inode *inode = mapping->host;
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
- struct iovec iov = { .iov_base = (void __user *)buf, .iov_len = len };
- struct kiocb kiocb;
- ssize_t ret;
- loff_t pos = *ppos;
-
- init_sync_kiocb(&kiocb, file);
- kiocb.ki_pos = pos;
- kiocb.ki_left = len;
-
- dprintk("%s: len: %zu, pos: %llu.\n", __func__, len, pos);
-
- mutex_lock(&inode->i_mutex);
- ret = pohmelfs_data_lock(pi, pos, len, POHMELFS_WRITE_LOCK);
- if (ret)
- goto err_out_unlock;
-
- ret = __generic_file_aio_write(&kiocb, &iov, 1, &kiocb.ki_pos);
- *ppos = kiocb.ki_pos;
-
- mutex_unlock(&inode->i_mutex);
- WARN_ON(ret < 0);
-
- if (ret > 0) {
- ssize_t err;
-
- err = generic_write_sync(file, pos, ret);
- if (err < 0)
- ret = err;
- WARN_ON(ret < 0);
- }
-
- return ret;
-
-err_out_unlock:
- mutex_unlock(&inode->i_mutex);
- return ret;
-}
-
-static const struct file_operations pohmelfs_file_ops = {
- .open = generic_file_open,
- .fsync = pohmelfs_fsync,
-
- .llseek = generic_file_llseek,
-
- .read = do_sync_read,
- .aio_read = generic_file_aio_read,
-
- .mmap = generic_file_mmap,
-
- .splice_read = generic_file_splice_read,
- .splice_write = generic_file_splice_write,
-
- .write = pohmelfs_write,
- .aio_write = generic_file_aio_write,
-};
-
-const struct inode_operations pohmelfs_symlink_inode_operations = {
- .readlink = generic_readlink,
- .follow_link = page_follow_link_light,
- .put_link = page_put_link,
-};
-
-int pohmelfs_setattr_raw(struct inode *inode, struct iattr *attr)
-{
- int err;
-
- err = inode_change_ok(inode, attr);
- if (err) {
- dprintk("%s: ino: %llu, inode changes are not allowed.\n", __func__, POHMELFS_I(inode)->ino);
- goto err_out_exit;
- }
-
- if ((attr->ia_valid & ATTR_SIZE) &&
- attr->ia_size != i_size_read(inode)) {
- err = vmtruncate(inode, attr->ia_size);
- if (err) {
- dprintk("%s: ino: %llu, failed to set the attributes.\n", __func__, POHMELFS_I(inode)->ino);
- goto err_out_exit;
- }
- }
-
- setattr_copy(inode, attr);
- mark_inode_dirty(inode);
-
- dprintk("%s: ino: %llu, mode: %o -> %o, uid: %u -> %u, gid: %u -> %u, size: %llu -> %llu.\n",
- __func__, POHMELFS_I(inode)->ino, inode->i_mode, attr->ia_mode,
- inode->i_uid, attr->ia_uid, inode->i_gid, attr->ia_gid, inode->i_size, attr->ia_size);
-
- return 0;
-
-err_out_exit:
- return err;
-}
-
-int pohmelfs_setattr(struct dentry *dentry, struct iattr *attr)
-{
- struct inode *inode = dentry->d_inode;
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
- int err;
-
- err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_WRITE_LOCK);
- if (err)
- goto err_out_exit;
-
- err = security_inode_setattr(dentry, attr);
- if (err)
- goto err_out_exit;
-
- err = pohmelfs_setattr_raw(inode, attr);
- if (err)
- goto err_out_exit;
-
- return 0;
-
-err_out_exit:
- return err;
-}
-
-static int pohmelfs_send_xattr_req(struct pohmelfs_inode *pi, u64 id, u64 start,
- const char *name, const void *value, size_t attrsize, int command)
-{
- struct pohmelfs_sb *psb = POHMELFS_SB(pi->vfs_inode.i_sb);
- int err, path_len, namelen = strlen(name) + 1; /* 0-byte */
- struct netfs_trans *t;
- struct netfs_cmd *cmd;
- void *data;
-
- dprintk("%s: id: %llu, start: %llu, name: '%s', attrsize: %zu, cmd: %d.\n",
- __func__, id, start, name, attrsize, command);
-
- path_len = pohmelfs_path_length(pi);
- if (path_len < 0) {
- err = path_len;
- goto err_out_exit;
- }
-
- t = netfs_trans_alloc(psb, namelen + path_len + attrsize, 0, 0);
- if (!t) {
- err = -ENOMEM;
- goto err_out_exit;
- }
-
- cmd = netfs_trans_current(t);
- data = cmd + 1;
-
- path_len = pohmelfs_construct_path_string(pi, data, path_len);
- if (path_len < 0) {
- err = path_len;
- goto err_out_put;
- }
- data += path_len;
-
- /*
- * 'name' is a NUL-terminated string already and
- * 'namelen' includes 0-byte.
- */
- memcpy(data, name, namelen);
- data += namelen;
-
- memcpy(data, value, attrsize);
-
- cmd->cmd = command;
- cmd->id = id;
- cmd->start = start;
- cmd->size = attrsize + namelen + path_len;
- cmd->ext = path_len;
- cmd->csize = 0;
- cmd->cpad = 0;
-
- netfs_convert_cmd(cmd);
- netfs_trans_update(cmd, t, namelen + path_len + attrsize);
-
- return netfs_trans_finish(t, psb);
-
-err_out_put:
- t->result = err;
- netfs_trans_put(t);
-err_out_exit:
- return err;
-}
-
-static int pohmelfs_setxattr(struct dentry *dentry, const char *name,
- const void *value, size_t attrsize, int flags)
-{
- struct inode *inode = dentry->d_inode;
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
- struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
-
- if (!(psb->state_flags & POHMELFS_FLAGS_XATTR))
- return -EOPNOTSUPP;
-
- return pohmelfs_send_xattr_req(pi, flags, attrsize, name,
- value, attrsize, NETFS_XATTR_SET);
-}
-
-static ssize_t pohmelfs_getxattr(struct dentry *dentry, const char *name,
- void *value, size_t attrsize)
-{
- struct inode *inode = dentry->d_inode;
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
- struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
- struct pohmelfs_mcache *m;
- int err;
- long timeout = psb->mcache_timeout;
-
- if (!(psb->state_flags & POHMELFS_FLAGS_XATTR))
- return -EOPNOTSUPP;
-
- m = pohmelfs_mcache_alloc(psb, 0, attrsize, value);
- if (IS_ERR(m))
- return PTR_ERR(m);
-
- dprintk("%s: ino: %llu, name: '%s', size: %zu.\n",
- __func__, pi->ino, name, attrsize);
-
- err = pohmelfs_send_xattr_req(pi, m->gen, attrsize, name, value, 0, NETFS_XATTR_GET);
- if (err)
- goto err_out_put;
-
- do {
- err = wait_for_completion_timeout(&m->complete, timeout);
- if (err) {
- err = m->err;
- break;
- }
-
- /*
- * This loop is a bit ugly, since it waits until reference counter
- * hits 1 and then puts the object here. Main goal is to prevent race with
- * the network thread, when it can start processing the given request, i.e.
- * increase its reference counter but yet not complete it, while
- * we will exit from ->getxattr() with timeout, and although request
- * will not be freed (its reference counter was increased by network
- * thread), data pointer provided by user may be released, so we will
- * overwrite an already freed area in the network thread.
- *
- * Now after timeout we remove request from the cache, so it can not be
- * found by network thread, and wait for its reference counter to hit 1,
- * i.e. if network thread already started to process this request, we wait
- * for it to finish, and then free object locally. If reference counter is
- * already 1, i.e. request is not used by anyone else, we can free it without
- * problem.
- */
- err = -ETIMEDOUT;
- timeout = HZ;
-
- pohmelfs_mcache_remove_locked(psb, m);
- } while (atomic_read(&m->refcnt) != 1);
-
- pohmelfs_mcache_put(psb, m);
-
- dprintk("%s: ino: %llu, err: %d.\n", __func__, pi->ino, err);
-
- return err;
-
-err_out_put:
- pohmelfs_mcache_put(psb, m);
- return err;
-}
-
-static int pohmelfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
-{
- struct inode *inode = dentry->d_inode;
-#if 0
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
- int err;
-
- err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
- if (err)
- return err;
- dprintk("%s: ino: %llu, mode: %o, uid: %u, gid: %u, size: %llu.\n",
- __func__, pi->ino, inode->i_mode, inode->i_uid,
- inode->i_gid, inode->i_size);
-#endif
-
- generic_fillattr(inode, stat);
- return 0;
-}
-
-const struct inode_operations pohmelfs_file_inode_operations = {
- .setattr = pohmelfs_setattr,
- .getattr = pohmelfs_getattr,
- .setxattr = pohmelfs_setxattr,
- .getxattr = pohmelfs_getxattr,
-};
-
-/*
- * Fill inode data: mode, size, operation callbacks and so on...
- */
-void pohmelfs_fill_inode(struct inode *inode, struct netfs_inode_info *info)
-{
- inode->i_mode = info->mode;
- set_nlink(inode, info->nlink);
- inode->i_uid = info->uid;
- inode->i_gid = info->gid;
- inode->i_blocks = info->blocks;
- inode->i_rdev = info->rdev;
- inode->i_size = info->size;
- inode->i_version = info->version;
- inode->i_blkbits = ffs(info->blocksize);
-
- dprintk("%s: inode: %p, num: %lu/%llu inode is regular: %d, dir: %d, link: %d, mode: %o, size: %llu.\n",
- __func__, inode, inode->i_ino, info->ino,
- S_ISREG(inode->i_mode), S_ISDIR(inode->i_mode),
- S_ISLNK(inode->i_mode), inode->i_mode, inode->i_size);
-
- inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
-
- /*
- * i_mapping is a pointer to i_data during inode initialization.
- */
- inode->i_data.a_ops = &pohmelfs_aops;
-
- if (S_ISREG(inode->i_mode)) {
- inode->i_fop = &pohmelfs_file_ops;
- inode->i_op = &pohmelfs_file_inode_operations;
- } else if (S_ISDIR(inode->i_mode)) {
- inode->i_fop = &pohmelfs_dir_fops;
- inode->i_op = &pohmelfs_dir_inode_ops;
- } else if (S_ISLNK(inode->i_mode)) {
- inode->i_op = &pohmelfs_symlink_inode_operations;
- inode->i_fop = &pohmelfs_file_ops;
- } else {
- inode->i_fop = &generic_ro_fops;
- }
-}
-
-static int pohmelfs_drop_inode(struct inode *inode)
-{
- struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
- struct pohmelfs_inode *pi = POHMELFS_I(inode);
-
- spin_lock(&psb->ino_lock);
- list_del_init(&pi->inode_entry);
- spin_unlock(&psb->ino_lock);
-
- return generic_drop_inode(inode);
-}
-
-static struct pohmelfs_inode *pohmelfs_get_inode_from_list(struct pohmelfs_sb *psb,
- struct list_head *head, unsigned int *count)
-{
- struct pohmelfs_inode *pi = NULL;
-
- spin_lock(&psb->ino_lock);
- if (!list_empty(head)) {
- pi = list_entry(head->next, struct pohmelfs_inode,
- inode_entry);
- list_del_init(&pi->inode_entry);
- *count = pi->drop_count;
- pi->drop_count = 0;
- }
- spin_unlock(&psb->ino_lock);
-
- return pi;
-}
-
-static void pohmelfs_flush_transactions(struct pohmelfs_sb *psb)
-{
- struct pohmelfs_config *c;
-
- mutex_lock(&psb->state_lock);
- list_for_each_entry(c, &psb->state_list, config_entry) {
- pohmelfs_state_flush_transactions(&c->state);
- }
- mutex_unlock(&psb->state_lock);
-}
-
-/*
- * ->put_super() callback. Invoked before superblock is destroyed,
- * so it has to clean all private data.
- */
-static void pohmelfs_put_super(struct super_block *sb)
-{
- struct pohmelfs_sb *psb = POHMELFS_SB(sb);
- struct pohmelfs_inode *pi;
- unsigned int count = 0;
- unsigned int in_drop_list = 0;
- struct inode *inode, *tmp;
-
- dprintk("%s.\n", __func__);
-
- /*
- * Kill pending transactions, which could affect inodes in-flight.
- */
- pohmelfs_flush_transactions(psb);
-
- while ((pi = pohmelfs_get_inode_from_list(psb, &psb->drop_list, &count))) {
- inode = &pi->vfs_inode;
-
- dprintk("%s: ino: %llu, pi: %p, inode: %p, count: %u.\n",
- __func__, pi->ino, pi, inode, count);
-
- if (atomic_read(&inode->i_count) != count) {
- printk("%s: ino: %llu, pi: %p, inode: %p, count: %u, i_count: %d.\n",
- __func__, pi->ino, pi, inode, count,
- atomic_read(&inode->i_count));
- count = atomic_read(&inode->i_count);
- in_drop_list++;
- }
-
- while (count--)
- iput(&pi->vfs_inode);
- }
-
- list_for_each_entry_safe(inode, tmp, &sb->s_inodes, i_sb_list) {
- pi = POHMELFS_I(inode);
-
- dprintk("%s: ino: %llu, pi: %p, inode: %p, i_count: %u.\n",
- __func__, pi->ino, pi, inode, atomic_read(&inode->i_count));
-
- /*
- * These are special inodes, they were created during
- * directory reading or lookup, and were not bound to dentry,
- * so they live here with reference counter being 1 and prevent
- * umount from succeed since it believes that they are busy.
- */
- count = atomic_read(&inode->i_count);
- if (count) {
- list_del_init(&inode->i_sb_list);
- while (count--)
- iput(&pi->vfs_inode);
- }
- }
-
- psb->trans_scan_timeout = psb->drop_scan_timeout = 0;
- cancel_delayed_work_sync(&psb->dwork);
- cancel_delayed_work_sync(&psb->drop_dwork);
- flush_scheduled_work();
-
- dprintk("%s: stopped workqueues.\n", __func__);
-
- pohmelfs_crypto_exit(psb);
- pohmelfs_state_exit(psb);
-
- bdi_destroy(&psb->bdi);
-
- kfree(psb);
- sb->s_fs_info = NULL;
-}
-
-static int pohmelfs_statfs(struct dentry *dentry, struct kstatfs *buf)
-{
- struct super_block *sb = dentry->d_sb;
- struct pohmelfs_sb *psb = POHMELFS_SB(sb);
-
- /*
- * There are no filesystem size limits yet.
- */
- memset(buf, 0, sizeof(struct kstatfs));
-
- buf->f_type = POHMELFS_MAGIC_NUM; /* 'POH.' */
- buf->f_bsize = sb->s_blocksize;
- buf->f_files = psb->ino;
- buf->f_namelen = 255;
- buf->f_files = atomic_long_read(&psb->total_inodes);
- buf->f_bfree = buf->f_bavail = psb->avail_size >> PAGE_SHIFT;
- buf->f_blocks = psb->total_size >> PAGE_SHIFT;
-
- dprintk("%s: total: %llu, avail: %llu, inodes: %llu, bsize: %lu.\n",
- __func__, psb->total_size, psb->avail_size, buf->f_files, sb->s_blocksize);
-
- return 0;
-}
-
-static int pohmelfs_show_options(struct seq_file *seq, struct dentry *root)
-{
- struct pohmelfs_sb *psb = POHMELFS_SB(root->d_sb);
-
- seq_printf(seq, ",idx=%u", psb->idx);
- seq_printf(seq, ",trans_scan_timeout=%u", jiffies_to_msecs(psb->trans_scan_timeout));
- seq_printf(seq, ",drop_scan_timeout=%u", jiffies_to_msecs(psb->drop_scan_timeout));
- seq_printf(seq, ",wait_on_page_timeout=%u", jiffies_to_msecs(psb->wait_on_page_timeout));
- seq_printf(seq, ",trans_retries=%u", psb->trans_retries);
- seq_printf(seq, ",crypto_thread_num=%u", psb->crypto_thread_num);
- seq_printf(seq, ",trans_max_pages=%u", psb->trans_max_pages);
- seq_printf(seq, ",mcache_timeout=%u", jiffies_to_msecs(psb->mcache_timeout));
- if (psb->crypto_fail_unsupported)
- seq_printf(seq, ",crypto_fail_unsupported");
-
- return 0;
-}
-
-enum {
- pohmelfs_opt_idx,
- pohmelfs_opt_crypto_thread_num,
- pohmelfs_opt_trans_max_pages,
- pohmelfs_opt_crypto_fail_unsupported,
-
- /* Remountable options */
- pohmelfs_opt_trans_scan_timeout,
- pohmelfs_opt_drop_scan_timeout,
- pohmelfs_opt_wait_on_page_timeout,
- pohmelfs_opt_trans_retries,
- pohmelfs_opt_mcache_timeout,
-};
-
-static struct match_token pohmelfs_tokens[] = {
- {pohmelfs_opt_idx, "idx=%u"},
- {pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
- {pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
- {pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
- {pohmelfs_opt_trans_scan_timeout, "trans_scan_timeout=%u"},
- {pohmelfs_opt_drop_scan_timeout, "drop_scan_timeout=%u"},
- {pohmelfs_opt_wait_on_page_timeout, "wait_on_page_timeout=%u"},
- {pohmelfs_opt_trans_retries, "trans_retries=%u"},
- {pohmelfs_opt_mcache_timeout, "mcache_timeout=%u"},
-};
-
-static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb, int remount)
-{
- char *p;
- substring_t args[MAX_OPT_ARGS];
- int option, err;
-
- if (!options)
- return 0;
-
- while ((p = strsep(&options, ",")) != NULL) {
- int token;
- if (!*p)
- continue;
-
- token = match_token(p, pohmelfs_tokens, args);
-
- err = match_int(&args[0], &option);
- if (err)
- return err;
-
- if (remount && token <= pohmelfs_opt_crypto_fail_unsupported)
- continue;
-
- switch (token) {
- case pohmelfs_opt_idx:
- psb->idx = option;
- break;
- case pohmelfs_opt_trans_scan_timeout:
- psb->trans_scan_timeout = msecs_to_jiffies(option);
- break;
- case pohmelfs_opt_drop_scan_timeout:
- psb->drop_scan_timeout = msecs_to_jiffies(option);
- break;
- case pohmelfs_opt_wait_on_page_timeout:
- psb->wait_on_page_timeout = msecs_to_jiffies(option);
- break;
- case pohmelfs_opt_mcache_timeout:
- psb->mcache_timeout = msecs_to_jiffies(option);
- break;
- case pohmelfs_opt_trans_retries:
- psb->trans_retries = option;
- break;
- case pohmelfs_opt_crypto_thread_num:
- psb->crypto_thread_num = option;
- break;
- case pohmelfs_opt_trans_max_pages:
- psb->trans_max_pages = option;
- break;
- case pohmelfs_opt_crypto_fail_unsupported:
- psb->crypto_fail_unsupported = 1;
- break;
- default:
- return -EINVAL;
- }
- }
-
- return 0;
-}
-
-static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
-{
- int err;
- struct pohmelfs_sb *psb = POHMELFS_SB(sb);
- unsigned long old_sb_flags = sb->s_flags;
-
- err = pohmelfs_parse_options(data, psb, 1);
- if (err)
- goto err_out_restore;
-
- if (!(*flags & MS_RDONLY))
- sb->s_flags &= ~MS_RDONLY;
- return 0;
-
-err_out_restore:
- sb->s_flags = old_sb_flags;
- return err;
-}
-
-static void pohmelfs_flush_inode(struct pohmelfs_inode *pi, unsigned int count)
-{
- struct inode *inode = &pi->vfs_inode;
-
- dprintk("%s: %p: ino: %llu, owned: %d.\n",
- __func__, inode, pi->ino, test_bit(NETFS_INODE_OWNED, &pi->state));
-
- mutex_lock(&inode->i_mutex);
- if (test_and_clear_bit(NETFS_INODE_OWNED, &pi->state)) {
- filemap_fdatawrite(inode->i_mapping);
- inode->i_sb->s_op->write_inode(inode, 0);
- }
-
-#ifdef POHMELFS_TRUNCATE_ON_INODE_FLUSH
- truncate_inode_pages(inode->i_mapping, 0);
-#endif
-
- pohmelfs_data_unlock(pi, 0, ~0, POHMELFS_WRITE_LOCK);
- mutex_unlock(&inode->i_mutex);
-}
-
-static void pohmelfs_put_inode_count(struct pohmelfs_inode *pi, unsigned int count)
-{
- dprintk("%s: ino: %llu, pi: %p, inode: %p, count: %u.\n",
- __func__, pi->ino, pi, &pi->vfs_inode, count);
-
- if (test_and_clear_bit(NETFS_INODE_NEED_FLUSH, &pi->state))
- pohmelfs_flush_inode(pi, count);
-
- while (count--)
- iput(&pi->vfs_inode);
-}
-
-static void pohmelfs_drop_scan(struct work_struct *work)
-{
- struct pohmelfs_sb *psb =
- container_of(work, struct pohmelfs_sb, drop_dwork.work);
- struct pohmelfs_inode *pi;
- unsigned int count = 0;
-
- while ((pi = pohmelfs_get_inode_from_list(psb, &psb->drop_list, &count)))
- pohmelfs_put_inode_count(pi, count);
-
- pohmelfs_check_states(psb);
-
- if (psb->drop_scan_timeout)
- schedule_delayed_work(&psb->drop_dwork, psb->drop_scan_timeout);
-}
-
-/*
- * Run through all transactions starting from the oldest,
- * drop transaction from current state and try to send it
- * to all remote nodes, which are currently installed.
- */
-static void pohmelfs_trans_scan_state(struct netfs_state *st)
-{
- struct rb_node *rb_node;
- struct netfs_trans_dst *dst;
- struct pohmelfs_sb *psb = st->psb;
- unsigned int timeout = psb->trans_scan_timeout;
- struct netfs_trans *t;
- int err;
-
- mutex_lock(&st->trans_lock);
- for (rb_node = rb_first(&st->trans_root); rb_node; ) {
- dst = rb_entry(rb_node, struct netfs_trans_dst, state_entry);
- t = dst->trans;
-
- if (timeout && time_after(dst->send_time + timeout, jiffies)
- && dst->retries == 0)
- break;
-
- dprintk("%s: t: %p, gen: %u, st: %p, retries: %u, max: %u.\n",
- __func__, t, t->gen, st, dst->retries, psb->trans_retries);
- netfs_trans_get(t);
-
- rb_node = rb_next(rb_node);
-
- err = -ETIMEDOUT;
- if (timeout && (++dst->retries < psb->trans_retries))
- err = netfs_trans_resend(t, psb);
-
- if (err || (t->flags & NETFS_TRANS_SINGLE_DST)) {
- if (netfs_trans_remove_nolock(dst, st))
- netfs_trans_drop_dst_nostate(dst);
- }
-
- t->result = err;
- netfs_trans_put(t);
- }
- mutex_unlock(&st->trans_lock);
-}
-
-/*
- * Walk through all installed network states and resend all
- * transactions, which are old enough.
- */
-static void pohmelfs_trans_scan(struct work_struct *work)
-{
- struct pohmelfs_sb *psb =
- container_of(work, struct pohmelfs_sb, dwork.work);
- struct netfs_state *st;
- struct pohmelfs_config *c;
-
- mutex_lock(&psb->state_lock);
- list_for_each_entry(c, &psb->state_list, config_entry) {
- st = &c->state;
-
- pohmelfs_trans_scan_state(st);
- }
- mutex_unlock(&psb->state_lock);
-
- /*
- * If no timeout specified then system is in the middle of umount process,
- * so no need to reschedule scanning process again.
- */
- if (psb->trans_scan_timeout)
- schedule_delayed_work(&psb->dwork, psb->trans_scan_timeout);
-}
-
-int pohmelfs_meta_command_data(struct pohmelfs_inode *pi, u64 id, unsigned int cmd_op, char *addon,
- unsigned int flags, netfs_trans_complete_t complete, void *priv, u64 start)
-{
- struct inode *inode = &pi->vfs_inode;
- struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
- int err = 0, sz;
- struct netfs_trans *t;
- int path_len, addon_len = 0;
- void *data;
- struct netfs_inode_info *info;
- struct netfs_cmd *cmd;
-
- dprintk("%s: ino: %llu, cmd: %u, addon: %p.\n", __func__, pi->ino, cmd_op, addon);
-
- path_len = pohmelfs_path_length(pi);
- if (path_len < 0) {
- err = path_len;
- goto err_out_exit;
- }
-
- if (addon)
- addon_len = strlen(addon) + 1; /* 0-byte */
- sz = addon_len;
-
- if (cmd_op == NETFS_INODE_INFO)
- sz += sizeof(struct netfs_inode_info);
-
- t = netfs_trans_alloc(psb, sz + path_len, flags, 0);
- if (!t) {
- err = -ENOMEM;
- goto err_out_exit;
- }
- t->complete = complete;
- t->private = priv;
-
- cmd = netfs_trans_current(t);
- data = (void *)(cmd + 1);
-
- if (cmd_op == NETFS_INODE_INFO) {
- info = (struct netfs_inode_info *)(cmd + 1);
- data = (void *)(info + 1);
-
- /*
- * We are under i_mutex, can read and change whatever we want...
- */
- info->mode = inode->i_mode;
- info->nlink = inode->i_nlink;
- info->uid = inode->i_uid;
- info->gid = inode->i_gid;
- info->blocks = inode->i_blocks;
- info->rdev = inode->i_rdev;
- info->size = inode->i_size;
- info->version = inode->i_version;
-
- netfs_convert_inode_info(info);
- }
-
- path_len = pohmelfs_construct_path_string(pi, data, path_len);
- if (path_len < 0)
- goto err_out_free;
-
- dprintk("%s: path_len: %d.\n", __func__, path_len);
-
- if (addon) {
- path_len--; /* Do not place null-byte before the addon */
- path_len += sprintf(data + path_len, "/%s", addon) + 1; /* 0 - byte */
- }
-
- sz += path_len;
-
- cmd->cmd = cmd_op;
- cmd->ext = path_len;
- cmd->size = sz;
- cmd->id = id;
- cmd->start = start;
-
- netfs_convert_cmd(cmd);
- netfs_trans_update(cmd, t, sz);
-
- /*
- * Note, that it is possible to leak error here: transaction callback will not
- * be invoked for allocation path failure.
- */
- return netfs_trans_finish(t, psb);
-
-err_out_free:
- netfs_trans_free(t);
-err_out_exit:
- if (complete)
- complete(NULL, 0, priv, err);
- return err;
-}
-
-int pohmelfs_meta_command(struct pohmelfs_inode *pi, unsigned int cmd_op, unsigned int flags,
- netfs_trans_complete_t complete, void *priv, u64 start)
-{
- return pohmelfs_meta_command_data(pi, pi->ino, cmd_op, NULL, flags, complete, priv, start);
-}
-
-/*
- * Send request and wait for POHMELFS root capabilities response,
- * which will update server's informaion about size of the export,
- * permissions, number of objects, available size and so on.
- */
-static int pohmelfs_root_handshake(struct pohmelfs_sb *psb)
-{
- struct netfs_trans *t;
- struct netfs_cmd *cmd;
- int err = -ENOMEM;
-
- t = netfs_trans_alloc(psb, 0, 0, 0);
- if (!t)
- goto err_out_exit;
-
- cmd = netfs_trans_current(t);
-
- cmd->cmd = NETFS_CAPABILITIES;
- cmd->id = POHMELFS_ROOT_CAPABILITIES;
- cmd->size = 0;
- cmd->start = 0;
- cmd->ext = 0;
- cmd->csize = 0;
-
- netfs_convert_cmd(cmd);
- netfs_trans_update(cmd, t, 0);
-
- err = netfs_trans_finish(t, psb);
- if (err)
- goto err_out_exit;
-
- psb->flags = ~0;
- err = wait_event_interruptible_timeout(psb->wait,
- (psb->flags != ~0),
- psb->wait_on_page_timeout);
- if (!err)
- err = -ETIMEDOUT;
- else if (err > 0)
- err = -psb->flags;
-
- if (err)
- goto err_out_exit;
-
- return 0;
-
-err_out_exit:
- return err;
-}
-
-static int pohmelfs_show_stats(struct seq_file *m, struct dentry *root)
-{
- struct netfs_state *st;
- struct pohmelfs_ctl *ctl;
- struct pohmelfs_sb *psb = POHMELFS_SB(root->d_sb);
- struct pohmelfs_config *c;
-
- mutex_lock(&psb->state_lock);
-
- seq_printf(m, "\nidx addr(:port) socket_type protocol active priority permissions\n");
-
- list_for_each_entry(c, &psb->state_list, config_entry) {
- st = &c->state;
- ctl = &st->ctl;
-
- seq_printf(m, "%u ", ctl->idx);
- if (ctl->addr.sa_family == AF_INET) {
- struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr;
- seq_printf(m, "%pI4:%u", &sin->sin_addr.s_addr, ntohs(sin->sin_port));
- } else if (ctl->addr.sa_family == AF_INET6) {
- struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr;
- seq_printf(m, "%pi6:%u", &sin->sin6_addr, ntohs(sin->sin6_port));
- } else {
- unsigned int i;
- for (i = 0; i < ctl->addrlen; ++i)
- seq_printf(m, "%02x.", ctl->addr.addr[i]);
- }
-
- seq_printf(m, " %u %u %d %u %x\n",
- ctl->type, ctl->proto,
- st->socket != NULL,
- ctl->prio, ctl->perm);
- }
- mutex_unlock(&psb->state_lock);
-
- return 0;
-}
-
-static const struct super_operations pohmelfs_sb_ops = {
- .alloc_inode = pohmelfs_alloc_inode,
- .destroy_inode = pohmelfs_destroy_inode,
- .drop_inode = pohmelfs_drop_inode,
- .write_inode = pohmelfs_write_inode,
- .put_super = pohmelfs_put_super,
- .remount_fs = pohmelfs_remount,
- .statfs = pohmelfs_statfs,
- .show_options = pohmelfs_show_options,
- .show_stats = pohmelfs_show_stats,
-};
-
-/*
- * Allocate private superblock and create root dir.
- */
-static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent)
-{
- struct pohmelfs_sb *psb;
- int err = -ENOMEM;
- struct inode *root;
- struct pohmelfs_inode *npi;
- struct qstr str;
-
- psb = kzalloc(sizeof(struct pohmelfs_sb), GFP_KERNEL);
- if (!psb)
- goto err_out_exit;
-
- err = bdi_init(&psb->bdi);
- if (err)
- goto err_out_free_sb;
-
- err = bdi_register(&psb->bdi, NULL, "pfs-%d", atomic_inc_return(&psb_bdi_num));
- if (err) {
- bdi_destroy(&psb->bdi);
- goto err_out_free_sb;
- }
-
- sb->s_fs_info = psb;
- sb->s_op = &pohmelfs_sb_ops;
- sb->s_magic = POHMELFS_MAGIC_NUM;
- sb->s_maxbytes = MAX_LFS_FILESIZE;
- sb->s_blocksize = PAGE_SIZE;
- sb->s_bdi = &psb->bdi;
-
- psb->sb = sb;
-
- psb->ino = 2;
- psb->idx = 0;
- psb->active_state = NULL;
- psb->trans_retries = 5;
- psb->trans_data_size = PAGE_SIZE;
- psb->drop_scan_timeout = msecs_to_jiffies(1000);
- psb->trans_scan_timeout = msecs_to_jiffies(5000);
- psb->wait_on_page_timeout = msecs_to_jiffies(5000);
- init_waitqueue_head(&psb->wait);
-
- spin_lock_init(&psb->ino_lock);
-
- INIT_LIST_HEAD(&psb->drop_list);
-
- mutex_init(&psb->mcache_lock);
- psb->mcache_root = RB_ROOT;
- psb->mcache_timeout = msecs_to_jiffies(5000);
- atomic_long_set(&psb->mcache_gen, 0);
-
- psb->trans_max_pages = 100;
-
- psb->crypto_align_size = 16;
- psb->crypto_attached_size = 0;
- psb->hash_strlen = 0;
- psb->cipher_strlen = 0;
- psb->perform_crypto = 0;
- psb->crypto_thread_num = 2;
- psb->crypto_fail_unsupported = 0;
- mutex_init(&psb->crypto_thread_lock);
- INIT_LIST_HEAD(&psb->crypto_ready_list);
- INIT_LIST_HEAD(&psb->crypto_active_list);
-
- atomic_set(&psb->trans_gen, 1);
- atomic_long_set(&psb->total_inodes, 0);
-
- mutex_init(&psb->state_lock);
- INIT_LIST_HEAD(&psb->state_list);
-
- err = pohmelfs_parse_options((char *) data, psb, 0);
- if (err)
- goto err_out_free_bdi;
-
- err = pohmelfs_copy_crypto(psb);
- if (err)
- goto err_out_free_bdi;
-
- err = pohmelfs_state_init(psb);
- if (err)
- goto err_out_free_strings;
-
- err = pohmelfs_crypto_init(psb);
- if (err)
- goto err_out_state_exit;
-
- err = pohmelfs_root_handshake(psb);
- if (err)
- goto err_out_crypto_exit;
-
- str.name = "/";
- str.hash = jhash("/", 1, 0);
- str.len = 1;
-
- npi = pohmelfs_create_entry_local(psb, NULL, &str, 0, 0755|S_IFDIR);
- if (IS_ERR(npi)) {
- err = PTR_ERR(npi);
- goto err_out_crypto_exit;
- }
- set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
- clear_bit(NETFS_INODE_OWNED, &npi->state);
-
- root = &npi->vfs_inode;
-
- sb->s_root = d_alloc_root(root);
- if (!sb->s_root)
- goto err_out_put_root;
-
- INIT_DELAYED_WORK(&psb->drop_dwork, pohmelfs_drop_scan);
- schedule_delayed_work(&psb->drop_dwork, psb->drop_scan_timeout);
-
- INIT_DELAYED_WORK(&psb->dwork, pohmelfs_trans_scan);
- schedule_delayed_work(&psb->dwork, psb->trans_scan_timeout);
-
- return 0;
-
-err_out_put_root:
- iput(root);
-err_out_crypto_exit:
- pohmelfs_crypto_exit(psb);
-err_out_state_exit:
- pohmelfs_state_exit(psb);
-err_out_free_strings:
- kfree(psb->cipher_string);
- kfree(psb->hash_string);
-err_out_free_bdi:
- bdi_destroy(&psb->bdi);
-err_out_free_sb:
- kfree(psb);
-err_out_exit:
-
- dprintk("%s: err: %d.\n", __func__, err);
- return err;
-}
-
-/*
- * Some VFS magic here...
- */
-static struct dentry *pohmelfs_mount(struct file_system_type *fs_type,
- int flags, const char *dev_name, void *data)
-{
- return mount_nodev(fs_type, flags, data, pohmelfs_fill_super);
-}
-
-/*
- * We need this to sync all inodes earlier, since when writeback
- * is invoked from the umount/mntput path dcache is already shrunk,
- * see generic_shutdown_super(), and no inodes can access the path.
- */
-static void pohmelfs_kill_super(struct super_block *sb)
-{
- sync_inodes_sb(sb);
- kill_anon_super(sb);
-}
-
-static struct file_system_type pohmel_fs_type = {
- .owner = THIS_MODULE,
- .name = "pohmel",
- .mount = pohmelfs_mount,
- .kill_sb = pohmelfs_kill_super,
-};
-
-/*
- * Cache and module initializations and freeing routings.
- */
-static void pohmelfs_init_once(void *data)
-{
- struct pohmelfs_inode *pi = data;
-
- inode_init_once(&pi->vfs_inode);
-}
-
-static int __init pohmelfs_init_inodecache(void)
-{
- pohmelfs_inode_cache = kmem_cache_create("pohmelfs_inode_cache",
- sizeof(struct pohmelfs_inode),
- 0, (SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD),
- pohmelfs_init_once);
- if (!pohmelfs_inode_cache)
- return -ENOMEM;
-
- return 0;
-}
-
-static void pohmelfs_destroy_inodecache(void)
-{
- kmem_cache_destroy(pohmelfs_inode_cache);
-}
-
-static int __init init_pohmel_fs(void)
-{
- int err;
-
- err = pohmelfs_config_init();
- if (err)
- goto err_out_exit;
-
- err = pohmelfs_init_inodecache();
- if (err)
- goto err_out_config_exit;
-
- err = pohmelfs_mcache_init();
- if (err)
- goto err_out_destroy;
-
- err = netfs_trans_init();
- if (err)
- goto err_out_mcache_exit;
-
- err = register_filesystem(&pohmel_fs_type);
- if (err)
- goto err_out_trans;
-
- return 0;
-
-err_out_trans:
- netfs_trans_exit();
-err_out_mcache_exit:
- pohmelfs_mcache_exit();
-err_out_destroy:
- pohmelfs_destroy_inodecache();
-err_out_config_exit:
- pohmelfs_config_exit();
-err_out_exit:
- return err;
-}
-
-static void __exit exit_pohmel_fs(void)
-{
- unregister_filesystem(&pohmel_fs_type);
- pohmelfs_destroy_inodecache();
- pohmelfs_mcache_exit();
- pohmelfs_config_exit();
- netfs_trans_exit();
-}
-
-module_init(init_pohmel_fs);
-module_exit(exit_pohmel_fs);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
-MODULE_DESCRIPTION("Pohmel filesystem");
+++ /dev/null
-/*
- * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/backing-dev.h>
-#include <linux/fs.h>
-#include <linux/fsnotify.h>
-#include <linux/mempool.h>
-
-#include "netfs.h"
-
-static int pohmelfs_send_lock_trans(struct pohmelfs_inode *pi,
- u64 id, u64 start, u32 size, int type)
-{
- struct inode *inode = &pi->vfs_inode;
- struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
- struct netfs_trans *t;
- struct netfs_cmd *cmd;
- int path_len, err;
- void *data;
- struct netfs_lock *l;
- int isize = (type & POHMELFS_LOCK_GRAB) ? 0 : sizeof(struct netfs_inode_info);
-
- err = pohmelfs_path_length(pi);
- if (err < 0)
- goto err_out_exit;
-
- path_len = err;
-
- err = -ENOMEM;
- t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize,
- NETFS_TRANS_SINGLE_DST, 0);
- if (!t)
- goto err_out_exit;
-
- cmd = netfs_trans_current(t);
- data = cmd + 1;
-
- err = pohmelfs_construct_path_string(pi, data, path_len);
- if (err < 0)
- goto err_out_free;
- path_len = err;
-
- l = data + path_len;
-
- l->start = start;
- l->size = size;
- l->type = type;
- l->ino = pi->ino;
-
- cmd->cmd = NETFS_LOCK;
- cmd->start = 0;
- cmd->id = id;
- cmd->size = sizeof(struct netfs_lock) + path_len + isize;
- cmd->ext = path_len;
- cmd->csize = 0;
-
- netfs_convert_cmd(cmd);
- netfs_convert_lock(l);
-
- if (isize) {
- struct netfs_inode_info *info = (struct netfs_inode_info *)(l + 1);
-
- info->mode = inode->i_mode;
- info->nlink = inode->i_nlink;
- info->uid = inode->i_uid;
- info->gid = inode->i_gid;
- info->blocks = inode->i_blocks;
- info->rdev = inode->i_rdev;
- info->size = inode->i_size;
- info->version = inode->i_version;
-
- netfs_convert_inode_info(info);
- }
-
- netfs_trans_update(cmd, t, path_len + sizeof(struct netfs_lock) + isize);
-
- return netfs_trans_finish(t, psb);
-
-err_out_free:
- netfs_trans_free(t);
-err_out_exit:
- printk("%s: err: %d.\n", __func__, err);
- return err;
-}
-
-int pohmelfs_data_lock(struct pohmelfs_inode *pi, u64 start, u32 size, int type)
-{
- struct pohmelfs_sb *psb = POHMELFS_SB(pi->vfs_inode.i_sb);
- struct pohmelfs_mcache *m;
- int err = -ENOMEM;
- struct iattr iattr;
- struct inode *inode = &pi->vfs_inode;
-
- dprintk("%s: %p: ino: %llu, start: %llu, size: %u, "
- "type: %d, locked as: %d, owned: %d.\n",
- __func__, &pi->vfs_inode, pi->ino,
- start, size, type, pi->lock_type,
- !!test_bit(NETFS_INODE_OWNED, &pi->state));
-
- if (!pohmelfs_need_lock(pi, type))
- return 0;
-
- m = pohmelfs_mcache_alloc(psb, start, size, NULL);
- if (IS_ERR(m))
- return PTR_ERR(m);
-
- err = pohmelfs_send_lock_trans(pi, m->gen, start, size,
- type | POHMELFS_LOCK_GRAB);
- if (err)
- goto err_out_put;
-
- err = wait_for_completion_timeout(&m->complete, psb->mcache_timeout);
- if (err)
- err = m->err;
- else
- err = -ETIMEDOUT;
-
- if (err) {
- printk("%s: %p: ino: %llu, mgen: %llu, start: %llu, size: %u, err: %d.\n",
- __func__, &pi->vfs_inode, pi->ino, m->gen, start, size, err);
- }
-
- if (err && (err != -ENOENT))
- goto err_out_put;
-
- if (!err) {
- netfs_convert_inode_info(&m->info);
-
- iattr.ia_valid = ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_SIZE | ATTR_ATIME;
- iattr.ia_mode = m->info.mode;
- iattr.ia_uid = m->info.uid;
- iattr.ia_gid = m->info.gid;
- iattr.ia_size = m->info.size;
- iattr.ia_atime = CURRENT_TIME;
-
- dprintk("%s: %p: ino: %llu, mgen: %llu, start: %llu, isize: %llu -> %llu.\n",
- __func__, &pi->vfs_inode, pi->ino, m->gen, start, inode->i_size, m->info.size);
-
- err = pohmelfs_setattr_raw(inode, &iattr);
- if (!err) {
- struct dentry *dentry = d_find_alias(inode);
- if (dentry) {
- fsnotify_change(dentry, iattr.ia_valid);
- dput(dentry);
- }
- }
- }
-
- pi->lock_type = type;
- set_bit(NETFS_INODE_OWNED, &pi->state);
-
- pohmelfs_mcache_put(psb, m);
-
- return 0;
-
-err_out_put:
- pohmelfs_mcache_put(psb, m);
- return err;
-}
-
-int pohmelfs_data_unlock(struct pohmelfs_inode *pi, u64 start, u32 size, int type)
-{
- dprintk("%s: %p: ino: %llu, start: %llu, size: %u, type: %d.\n",
- __func__, &pi->vfs_inode, pi->ino, start, size, type);
- pi->lock_type = 0;
- clear_bit(NETFS_INODE_REMOTE_DIR_SYNCED, &pi->state);
- clear_bit(NETFS_INODE_OWNED, &pi->state);
- return pohmelfs_send_lock_trans(pi, pi->ino, start, size, type);
-}
+++ /dev/null
-/*
- * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/mempool.h>
-
-#include "netfs.h"
-
-static struct kmem_cache *pohmelfs_mcache_cache;
-static mempool_t *pohmelfs_mcache_pool;
-
-static inline int pohmelfs_mcache_cmp(u64 gen, u64 new)
-{
- if (gen < new)
- return 1;
- if (gen > new)
- return -1;
- return 0;
-}
-
-struct pohmelfs_mcache *pohmelfs_mcache_search(struct pohmelfs_sb *psb, u64 gen)
-{
- struct rb_root *root = &psb->mcache_root;
- struct rb_node *n = root->rb_node;
- struct pohmelfs_mcache *tmp, *ret = NULL;
- int cmp;
-
- while (n) {
- tmp = rb_entry(n, struct pohmelfs_mcache, mcache_entry);
-
- cmp = pohmelfs_mcache_cmp(tmp->gen, gen);
- if (cmp < 0)
- n = n->rb_left;
- else if (cmp > 0)
- n = n->rb_right;
- else {
- ret = tmp;
- pohmelfs_mcache_get(ret);
- break;
- }
- }
-
- return ret;
-}
-
-static int pohmelfs_mcache_insert(struct pohmelfs_sb *psb, struct pohmelfs_mcache *m)
-{
- struct rb_root *root = &psb->mcache_root;
- struct rb_node **n = &root->rb_node, *parent = NULL;
- struct pohmelfs_mcache *ret = NULL, *tmp;
- int cmp;
-
- while (*n) {
- parent = *n;
-
- tmp = rb_entry(parent, struct pohmelfs_mcache, mcache_entry);
-
- cmp = pohmelfs_mcache_cmp(tmp->gen, m->gen);
- if (cmp < 0)
- n = &parent->rb_left;
- else if (cmp > 0)
- n = &parent->rb_right;
- else {
- ret = tmp;
- break;
- }
- }
-
- if (ret)
- return -EEXIST;
-
- rb_link_node(&m->mcache_entry, parent, n);
- rb_insert_color(&m->mcache_entry, root);
-
- return 0;
-}
-
-static int pohmelfs_mcache_remove(struct pohmelfs_sb *psb, struct pohmelfs_mcache *m)
-{
- if (m && m->mcache_entry.rb_parent_color) {
- rb_erase(&m->mcache_entry, &psb->mcache_root);
- m->mcache_entry.rb_parent_color = 0;
- return 1;
- }
- return 0;
-}
-
-void pohmelfs_mcache_remove_locked(struct pohmelfs_sb *psb, struct pohmelfs_mcache *m)
-{
- mutex_lock(&psb->mcache_lock);
- pohmelfs_mcache_remove(psb, m);
- mutex_unlock(&psb->mcache_lock);
-}
-
-struct pohmelfs_mcache *pohmelfs_mcache_alloc(struct pohmelfs_sb *psb, u64 start,
- unsigned int size, void *data)
-{
- struct pohmelfs_mcache *m;
- int err = -ENOMEM;
-
- m = mempool_alloc(pohmelfs_mcache_pool, GFP_KERNEL);
- if (!m)
- goto err_out_exit;
-
- init_completion(&m->complete);
- m->err = 0;
- atomic_set(&m->refcnt, 1);
- m->data = data;
- m->start = start;
- m->size = size;
- m->gen = atomic_long_inc_return(&psb->mcache_gen);
-
- mutex_lock(&psb->mcache_lock);
- err = pohmelfs_mcache_insert(psb, m);
- mutex_unlock(&psb->mcache_lock);
- if (err)
- goto err_out_free;
-
- return m;
-
-err_out_free:
- mempool_free(m, pohmelfs_mcache_pool);
-err_out_exit:
- return ERR_PTR(err);
-}
-
-void pohmelfs_mcache_free(struct pohmelfs_sb *psb, struct pohmelfs_mcache *m)
-{
- pohmelfs_mcache_remove_locked(psb, m);
-
- mempool_free(m, pohmelfs_mcache_pool);
-}
-
-int __init pohmelfs_mcache_init(void)
-{
- pohmelfs_mcache_cache = kmem_cache_create("pohmelfs_mcache_cache",
- sizeof(struct pohmelfs_mcache),
- 0, (SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD), NULL);
- if (!pohmelfs_mcache_cache)
- goto err_out_exit;
-
- pohmelfs_mcache_pool = mempool_create_slab_pool(256, pohmelfs_mcache_cache);
- if (!pohmelfs_mcache_pool)
- goto err_out_free;
-
- return 0;
-
-err_out_free:
- kmem_cache_destroy(pohmelfs_mcache_cache);
-err_out_exit:
- return -ENOMEM;
-}
-
-void pohmelfs_mcache_exit(void)
-{
- mempool_destroy(pohmelfs_mcache_pool);
- kmem_cache_destroy(pohmelfs_mcache_cache);
-}
+++ /dev/null
-/*
- * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/fsnotify.h>
-#include <linux/jhash.h>
-#include <linux/in.h>
-#include <linux/in6.h>
-#include <linux/kthread.h>
-#include <linux/pagemap.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
-#include <linux/swap.h>
-#include <linux/syscalls.h>
-#include <linux/vmalloc.h>
-
-#include "netfs.h"
-
-/*
- * Async machinery lives here.
- * All commands being sent to server do _not_ require sync reply,
- * instead, if it is really needed, like readdir or readpage, caller
- * sleeps waiting for data, which will be placed into provided buffer
- * and caller will be awakened.
- *
- * Every command response can come without some listener. For example
- * readdir response will add new objects into cache without appropriate
- * request from userspace. This is used in cache coherency.
- *
- * If object is not found for given data, it is discarded.
- *
- * All requests are received by dedicated kernel thread.
- */
-
-/*
- * Basic network sending/receiving functions.
- * Blocked mode is used.
- */
-static int netfs_data_recv(struct netfs_state *st, void *buf, u64 size)
-{
- struct msghdr msg;
- struct kvec iov;
- int err;
-
- BUG_ON(!size);
-
- iov.iov_base = buf;
- iov.iov_len = size;
-
- msg.msg_iov = (struct iovec *)&iov;
- msg.msg_iovlen = 1;
- msg.msg_name = NULL;
- msg.msg_namelen = 0;
- msg.msg_control = NULL;
- msg.msg_controllen = 0;
- msg.msg_flags = MSG_DONTWAIT;
-
- err = kernel_recvmsg(st->socket, &msg, &iov, 1, iov.iov_len,
- msg.msg_flags);
- if (err <= 0) {
- printk("%s: failed to recv data: size: %llu, err: %d.\n", __func__, size, err);
- if (err == 0)
- err = -ECONNRESET;
- }
-
- return err;
-}
-
-static int pohmelfs_data_recv(struct netfs_state *st, void *data, unsigned int size)
-{
- unsigned int revents = 0;
- unsigned int err_mask = POLLERR | POLLHUP | POLLRDHUP;
- unsigned int mask = err_mask | POLLIN;
- int err = 0;
-
- while (size && !err) {
- revents = netfs_state_poll(st);
-
- if (!(revents & mask)) {
- DEFINE_WAIT(wait);
-
- for (;;) {
- prepare_to_wait(&st->thread_wait, &wait, TASK_INTERRUPTIBLE);
- if (kthread_should_stop())
- break;
-
- revents = netfs_state_poll(st);
-
- if (revents & mask)
- break;
-
- if (signal_pending(current))
- break;
-
- schedule();
- continue;
- }
- finish_wait(&st->thread_wait, &wait);
- }
-
- err = 0;
- netfs_state_lock(st);
- if (st->socket && (st->read_socket == st->socket) && (revents & POLLIN)) {
- err = netfs_data_recv(st, data, size);
- if (err > 0) {
- data += err;
- size -= err;
- err = 0;
- } else if (err == 0)
- err = -ECONNRESET;
- }
-
- if (revents & err_mask) {
- printk("%s: revents: %x, socket: %p, size: %u, err: %d.\n",
- __func__, revents, st->socket, size, err);
- err = -ECONNRESET;
- }
- netfs_state_unlock(st);
-
- if (err < 0) {
- if (netfs_state_trylock_send(st)) {
- netfs_state_exit(st);
- err = netfs_state_init(st);
- if (!err)
- err = -EAGAIN;
- netfs_state_unlock_send(st);
- } else {
- st->need_reset = 1;
- }
- }
-
- if (kthread_should_stop())
- err = -ENODEV;
-
- if (err)
- printk("%s: socket: %p, read_socket: %p, revents: %x, rev_error: %d, "
- "should_stop: %d, size: %u, err: %d.\n",
- __func__, st->socket, st->read_socket,
- revents, revents & err_mask, kthread_should_stop(), size, err);
- }
-
- return err;
-}
-
-int pohmelfs_data_recv_and_check(struct netfs_state *st, void *data, unsigned int size)
-{
- struct netfs_cmd *cmd = &st->cmd;
- int err;
-
- err = pohmelfs_data_recv(st, data, size);
- if (err)
- return err;
-
- return pohmelfs_crypto_process_input_data(&st->eng, cmd->iv, data, NULL, size);
-}
-
-/*
- * Polling machinery.
- */
-
-struct netfs_poll_helper {
- poll_table pt;
- struct netfs_state *st;
-};
-
-static int netfs_queue_wake(wait_queue_t *wait, unsigned mode, int sync, void *key)
-{
- struct netfs_state *st = container_of(wait, struct netfs_state, wait);
-
- wake_up(&st->thread_wait);
- return 1;
-}
-
-static void netfs_queue_func(struct file *file, wait_queue_head_t *whead,
- poll_table *pt)
-{
- struct netfs_state *st = container_of(pt, struct netfs_poll_helper, pt)->st;
-
- st->whead = whead;
- init_waitqueue_func_entry(&st->wait, netfs_queue_wake);
- add_wait_queue(whead, &st->wait);
-}
-
-static void netfs_poll_exit(struct netfs_state *st)
-{
- if (st->whead) {
- remove_wait_queue(st->whead, &st->wait);
- st->whead = NULL;
- }
-}
-
-static int netfs_poll_init(struct netfs_state *st)
-{
- struct netfs_poll_helper ph;
-
- ph.st = st;
- init_poll_funcptr(&ph.pt, &netfs_queue_func);
-
- st->socket->ops->poll(NULL, st->socket, &ph.pt);
- return 0;
-}
-
-/*
- * Get response for readpage command. We search inode and page in its mapping
- * and copy data into. If it was async request, then we queue page into shared
- * data and wakeup listener, who will copy it to userspace.
- *
- * There is a work in progress of allowing to call copy_to_user() directly from
- * async receiving kernel thread.
- */
-static int pohmelfs_read_page_response(struct netfs_state *st)
-{
- struct pohmelfs_sb *psb = st->psb;
- struct netfs_cmd *cmd = &st->cmd;
- struct inode *inode;
- struct page *page;
- int err = 0;
-
- if (cmd->size > PAGE_CACHE_SIZE) {
- err = -EINVAL;
- goto err_out_exit;
- }
-
- inode = ilookup(st->psb->sb, cmd->id);
- if (!inode) {
- printk("%s: failed to find inode: id: %llu.\n", __func__, cmd->id);
- err = -ENOENT;
- goto err_out_exit;
- }
-
- page = find_get_page(inode->i_mapping, cmd->start >> PAGE_CACHE_SHIFT);
- if (!page || !PageLocked(page)) {
- printk("%s: failed to find/lock page: page: %p, id: %llu, start: %llu, index: %llu.\n",
- __func__, page, cmd->id, cmd->start, cmd->start >> PAGE_CACHE_SHIFT);
-
- while (cmd->size) {
- unsigned int sz = min(cmd->size, st->size);
-
- err = pohmelfs_data_recv(st, st->data, sz);
- if (err)
- break;
-
- cmd->size -= sz;
- }
-
- err = -ENODEV;
- if (page)
- goto err_out_page_put;
- goto err_out_put;
- }
-
- if (cmd->size) {
- void *addr;
-
- addr = kmap(page);
- err = pohmelfs_data_recv(st, addr, cmd->size);
- kunmap(page);
-
- if (err)
- goto err_out_page_unlock;
- }
-
- dprintk("%s: page: %p, start: %llu, size: %u, locked: %d.\n",
- __func__, page, cmd->start, cmd->size, PageLocked(page));
-
- SetPageChecked(page);
- if ((psb->hash_string || psb->cipher_string) && psb->perform_crypto && cmd->size) {
- err = pohmelfs_crypto_process_input_page(&st->eng, page, cmd->size, cmd->iv);
- if (err < 0)
- goto err_out_page_unlock;
- } else {
- SetPageUptodate(page);
- unlock_page(page);
- page_cache_release(page);
- }
-
- pohmelfs_put_inode(POHMELFS_I(inode));
- wake_up(&st->psb->wait);
-
- return 0;
-
-err_out_page_unlock:
- SetPageError(page);
- unlock_page(page);
-err_out_page_put:
- page_cache_release(page);
-err_out_put:
- pohmelfs_put_inode(POHMELFS_I(inode));
-err_out_exit:
- wake_up(&st->psb->wait);
- return err;
-}
-
-static int pohmelfs_check_name(struct pohmelfs_inode *parent, struct qstr *str,
- struct netfs_inode_info *info)
-{
- struct inode *inode;
- struct pohmelfs_name *n;
- int err = 0;
- u64 ino = 0;
-
- mutex_lock(&parent->offset_lock);
- n = pohmelfs_search_hash(parent, str->hash);
- if (n)
- ino = n->ino;
- mutex_unlock(&parent->offset_lock);
-
- if (!ino)
- goto out;
-
- inode = ilookup(parent->vfs_inode.i_sb, ino);
- if (!inode)
- goto out;
-
- dprintk("%s: parent: %llu, inode: %llu.\n", __func__, parent->ino, ino);
-
- pohmelfs_fill_inode(inode, info);
- pohmelfs_put_inode(POHMELFS_I(inode));
- err = -EEXIST;
-out:
- return err;
-}
-
-/*
- * Readdir response from server. If special field is set, we wakeup
- * listener (readdir() call), which will copy data to userspace.
- */
-static int pohmelfs_readdir_response(struct netfs_state *st)
-{
- struct inode *inode;
- struct netfs_cmd *cmd = &st->cmd;
- struct netfs_inode_info *info;
- struct pohmelfs_inode *parent = NULL, *npi;
- int err = 0, last = cmd->ext;
- struct qstr str;
-
- if (cmd->size > st->size)
- return -EINVAL;
-
- inode = ilookup(st->psb->sb, cmd->id);
- if (!inode) {
- printk("%s: failed to find inode: id: %llu.\n", __func__, cmd->id);
- return -ENOENT;
- }
- parent = POHMELFS_I(inode);
-
- if (!cmd->size && cmd->start) {
- err = -cmd->start;
- goto out;
- }
-
- if (cmd->size) {
- char *name;
-
- err = pohmelfs_data_recv_and_check(st, st->data, cmd->size);
- if (err)
- goto err_out_put;
-
- info = (struct netfs_inode_info *)(st->data);
-
- name = (char *)(info + 1);
- str.len = cmd->size - sizeof(struct netfs_inode_info) - 1 - cmd->cpad;
- name[str.len] = 0;
- str.name = name;
- str.hash = jhash(str.name, str.len, 0);
-
- netfs_convert_inode_info(info);
-
- if (parent) {
- err = pohmelfs_check_name(parent, &str, info);
- if (err) {
- if (err == -EEXIST)
- err = 0;
- goto out;
- }
- }
-
- info->ino = cmd->start;
- if (!info->ino)
- info->ino = pohmelfs_new_ino(st->psb);
-
- dprintk("%s: parent: %llu, ino: %llu, name: '%s', hash: %x, len: %u, mode: %o.\n",
- __func__, parent->ino, info->ino, str.name, str.hash, str.len,
- info->mode);
-
- npi = pohmelfs_new_inode(st->psb, parent, &str, info, 0);
- if (IS_ERR(npi)) {
- err = PTR_ERR(npi);
-
- if (err != -EEXIST)
- goto err_out_put;
- } else {
- struct dentry *dentry, *alias, *pd;
-
- set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
- clear_bit(NETFS_INODE_OWNED, &npi->state);
-
- pd = d_find_alias(&parent->vfs_inode);
- if (pd) {
- str.hash = full_name_hash(str.name, str.len);
- dentry = d_alloc(pd, &str);
- if (dentry) {
- alias = d_materialise_unique(dentry, &npi->vfs_inode);
- if (alias)
- dput(alias);
- }
-
- dput(dentry);
- dput(pd);
- }
- }
- }
-out:
- if (last) {
- set_bit(NETFS_INODE_REMOTE_DIR_SYNCED, &parent->state);
- set_bit(NETFS_INODE_REMOTE_SYNCED, &parent->state);
- wake_up(&st->psb->wait);
- }
- pohmelfs_put_inode(parent);
-
- return err;
-
-err_out_put:
- clear_bit(NETFS_INODE_REMOTE_DIR_SYNCED, &parent->state);
- printk("%s: parent: %llu, ino: %llu, cmd_id: %llu.\n", __func__, parent->ino, cmd->start, cmd->id);
- pohmelfs_put_inode(parent);
- wake_up(&st->psb->wait);
- return err;
-}
-
-/*
- * Lookup command response.
- * It searches for inode to be looked at (if it exists) and substitutes
- * its inode information (size, permission, mode and so on), if inode does
- * not exist, new one will be created and inserted into caches.
- */
-static int pohmelfs_lookup_response(struct netfs_state *st)
-{
- struct inode *inode = NULL;
- struct netfs_cmd *cmd = &st->cmd;
- struct netfs_inode_info *info;
- struct pohmelfs_inode *parent = NULL, *npi;
- int err = -EINVAL;
- char *name;
-
- inode = ilookup(st->psb->sb, cmd->id);
- if (!inode) {
- printk("%s: lookup response: id: %llu, start: %llu, size: %u.\n",
- __func__, cmd->id, cmd->start, cmd->size);
- err = -ENOENT;
- goto err_out_exit;
- }
- parent = POHMELFS_I(inode);
-
- if (!cmd->size) {
- err = -cmd->start;
- goto err_out_put;
- }
-
- if (cmd->size < sizeof(struct netfs_inode_info)) {
- printk("%s: broken lookup response: id: %llu, start: %llu, size: %u.\n",
- __func__, cmd->id, cmd->start, cmd->size);
- err = -EINVAL;
- goto err_out_put;
- }
-
- err = pohmelfs_data_recv_and_check(st, st->data, cmd->size);
- if (err)
- goto err_out_put;
-
- info = (struct netfs_inode_info *)(st->data);
- name = (char *)(info + 1);
-
- netfs_convert_inode_info(info);
-
- info->ino = cmd->start;
- if (!info->ino)
- info->ino = pohmelfs_new_ino(st->psb);
-
- dprintk("%s: parent: %llu, ino: %llu, name: '%s', start: %llu.\n",
- __func__, parent->ino, info->ino, name, cmd->start);
-
- if (cmd->start)
- npi = pohmelfs_new_inode(st->psb, parent, NULL, info, 0);
- else {
- struct qstr str;
-
- str.name = name;
- str.len = cmd->size - sizeof(struct netfs_inode_info) - 1 - cmd->cpad;
- str.hash = jhash(name, str.len, 0);
-
- npi = pohmelfs_new_inode(st->psb, parent, &str, info, 0);
- }
- if (IS_ERR(npi)) {
- err = PTR_ERR(npi);
-
- if (err != -EEXIST)
- goto err_out_put;
- } else {
- set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
- clear_bit(NETFS_INODE_OWNED, &npi->state);
- }
-
- clear_bit(NETFS_COMMAND_PENDING, &parent->state);
- pohmelfs_put_inode(parent);
-
- wake_up(&st->psb->wait);
-
- return 0;
-
-err_out_put:
- pohmelfs_put_inode(parent);
-err_out_exit:
- clear_bit(NETFS_COMMAND_PENDING, &parent->state);
- wake_up(&st->psb->wait);
- printk("%s: inode: %p, id: %llu, start: %llu, size: %u, err: %d.\n",
- __func__, inode, cmd->id, cmd->start, cmd->size, err);
- return err;
-}
-
-/*
- * Create response, just marks local inode as 'created', so that writeback
- * for any of its children (or own) would not try to sync it again.
- */
-static int pohmelfs_create_response(struct netfs_state *st)
-{
- struct inode *inode;
- struct netfs_cmd *cmd = &st->cmd;
- struct pohmelfs_inode *pi;
-
- inode = ilookup(st->psb->sb, cmd->id);
- if (!inode) {
- printk("%s: failed to find inode: id: %llu, start: %llu.\n",
- __func__, cmd->id, cmd->start);
- goto err_out_exit;
- }
-
- pi = POHMELFS_I(inode);
-
- /*
- * To lock or not to lock?
- * We actually do not care if it races...
- */
- if (cmd->start)
- make_bad_inode(inode);
- set_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state);
-
- pohmelfs_put_inode(pi);
-
- wake_up(&st->psb->wait);
- return 0;
-
-err_out_exit:
- wake_up(&st->psb->wait);
- return -ENOENT;
-}
-
-/*
- * Object remove response. Just says that remove request has been received.
- * Used in cache coherency protocol.
- */
-static int pohmelfs_remove_response(struct netfs_state *st)
-{
- struct netfs_cmd *cmd = &st->cmd;
- int err;
-
- err = pohmelfs_data_recv_and_check(st, st->data, cmd->size);
- if (err)
- return err;
-
- dprintk("%s: parent: %llu, path: '%s'.\n", __func__, cmd->id, (char *)st->data);
-
- return 0;
-}
-
-/*
- * Transaction reply processing.
- *
- * Find transaction based on its generation number, bump its reference counter,
- * so that none could free it under us, drop from the trees and lists and
- * drop reference counter. When it hits zero (when all destinations replied
- * and all timeout handled by async scanning code), completion will be called
- * and transaction will be freed.
- */
-static int pohmelfs_transaction_response(struct netfs_state *st)
-{
- struct netfs_trans_dst *dst;
- struct netfs_trans *t = NULL;
- struct netfs_cmd *cmd = &st->cmd;
- short err = (signed)cmd->ext;
-
- mutex_lock(&st->trans_lock);
- dst = netfs_trans_search(st, cmd->start);
- if (dst) {
- netfs_trans_remove_nolock(dst, st);
- t = dst->trans;
- }
- mutex_unlock(&st->trans_lock);
-
- if (!t) {
- printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u.\n",
- __func__, cmd->start, cmd->id, cmd->size, cmd->ext);
- err = -EINVAL;
- goto out;
- }
-
- t->result = err;
- netfs_trans_drop_dst_nostate(dst);
-
-out:
- wake_up(&st->psb->wait);
- return err;
-}
-
-/*
- * Inode metadata cache coherency message.
- */
-static int pohmelfs_page_cache_response(struct netfs_state *st)
-{
- struct netfs_cmd *cmd = &st->cmd;
- struct inode *inode;
-
- dprintk("%s: st: %p, id: %llu, start: %llu, size: %u.\n", __func__, st, cmd->id, cmd->start, cmd->size);
-
- inode = ilookup(st->psb->sb, cmd->id);
- if (!inode) {
- printk("%s: failed to find inode: id: %llu.\n", __func__, cmd->id);
- return -ENOENT;
- }
-
- set_bit(NETFS_INODE_NEED_FLUSH, &POHMELFS_I(inode)->state);
- pohmelfs_put_inode(POHMELFS_I(inode));
-
- return 0;
-}
-
-/*
- * Root capabilities response: export statistics
- * like used and available size, number of files and dirs,
- * permissions.
- */
-static int pohmelfs_root_cap_response(struct netfs_state *st)
-{
- struct netfs_cmd *cmd = &st->cmd;
- struct netfs_root_capabilities *cap;
- struct pohmelfs_sb *psb = st->psb;
-
- if (cmd->size != sizeof(struct netfs_root_capabilities)) {
- psb->flags = EPROTO;
- wake_up(&psb->wait);
- return -EPROTO;
- }
-
- cap = st->data;
-
- netfs_convert_root_capabilities(cap);
-
- if (psb->total_size < cap->used + cap->avail)
- psb->total_size = cap->used + cap->avail;
- if (cap->avail)
- psb->avail_size = cap->avail;
- psb->state_flags = cap->flags;
-
- if (psb->state_flags & POHMELFS_FLAGS_RO) {
- psb->sb->s_flags |= MS_RDONLY;
- printk(KERN_INFO "Mounting POHMELFS (%d) read-only.\n", psb->idx);
- }
-
- if (psb->state_flags & POHMELFS_FLAGS_XATTR)
- printk(KERN_INFO "Mounting POHMELFS (%d) "
- "with extended attributes support.\n", psb->idx);
-
- if (atomic_long_read(&psb->total_inodes) <= 1)
- atomic_long_set(&psb->total_inodes, cap->nr_files);
-
- dprintk("%s: total: %llu, avail: %llu, flags: %llx, inodes: %llu.\n",
- __func__, psb->total_size, psb->avail_size, psb->state_flags, cap->nr_files);
-
- psb->flags = 0;
- wake_up(&psb->wait);
- return 0;
-}
-
-/*
- * Crypto capabilities of the server, where it says that
- * it supports or does not requested hash/cipher algorithms.
- */
-static int pohmelfs_crypto_cap_response(struct netfs_state *st)
-{
- struct netfs_cmd *cmd = &st->cmd;
- struct netfs_crypto_capabilities *cap;
- struct pohmelfs_sb *psb = st->psb;
- int err = 0;
-
- if (cmd->size != sizeof(struct netfs_crypto_capabilities)) {
- psb->flags = EPROTO;
- wake_up(&psb->wait);
- return -EPROTO;
- }
-
- cap = st->data;
-
- dprintk("%s: cipher '%s': %s, hash: '%s': %s.\n",
- __func__,
- psb->cipher_string, (cap->cipher_strlen) ? "SUPPORTED" : "NOT SUPPORTED",
- psb->hash_string, (cap->hash_strlen) ? "SUPPORTED" : "NOT SUPPORTED");
-
- if (!cap->hash_strlen) {
- if (psb->hash_strlen && psb->crypto_fail_unsupported)
- err = -ENOTSUPP;
- psb->hash_strlen = 0;
- kfree(psb->hash_string);
- psb->hash_string = NULL;
- }
-
- if (!cap->cipher_strlen) {
- if (psb->cipher_strlen && psb->crypto_fail_unsupported)
- err = -ENOTSUPP;
- psb->cipher_strlen = 0;
- kfree(psb->cipher_string);
- psb->cipher_string = NULL;
- }
-
- return err;
-}
-
-/*
- * Capabilities handshake response.
- */
-static int pohmelfs_capabilities_response(struct netfs_state *st)
-{
- struct netfs_cmd *cmd = &st->cmd;
- int err = 0;
-
- err = pohmelfs_data_recv(st, st->data, cmd->size);
- if (err)
- return err;
-
- switch (cmd->id) {
- case POHMELFS_CRYPTO_CAPABILITIES:
- return pohmelfs_crypto_cap_response(st);
- case POHMELFS_ROOT_CAPABILITIES:
- return pohmelfs_root_cap_response(st);
- default:
- break;
- }
- return -EINVAL;
-}
-
-/*
- * Receiving extended attribute.
- * Does not work properly if received size is more than requested one,
- * it should not happen with current request/reply model though.
- */
-static int pohmelfs_getxattr_response(struct netfs_state *st)
-{
- struct pohmelfs_sb *psb = st->psb;
- struct netfs_cmd *cmd = &st->cmd;
- struct pohmelfs_mcache *m;
- short error = (signed short)cmd->ext, err;
- unsigned int sz, total_size;
-
- m = pohmelfs_mcache_search(psb, cmd->id);
-
- dprintk("%s: id: %llu, gen: %llu, err: %d.\n",
- __func__, cmd->id, (m) ? m->gen : 0, error);
-
- if (!m) {
- printk("%s: failed to find getxattr cache entry: id: %llu.\n", __func__, cmd->id);
- return -ENOENT;
- }
-
- if (cmd->size) {
- sz = min_t(unsigned int, cmd->size, m->size);
- err = pohmelfs_data_recv_and_check(st, m->data, sz);
- if (err) {
- error = err;
- goto out;
- }
-
- m->size = sz;
- total_size = cmd->size - sz;
-
- while (total_size) {
- sz = min(total_size, st->size);
-
- err = pohmelfs_data_recv_and_check(st, st->data, sz);
- if (err) {
- error = err;
- break;
- }
-
- total_size -= sz;
- }
- }
-
-out:
- m->err = error;
- complete(&m->complete);
- pohmelfs_mcache_put(psb, m);
-
- return error;
-}
-
-int pohmelfs_data_lock_response(struct netfs_state *st)
-{
- struct pohmelfs_sb *psb = st->psb;
- struct netfs_cmd *cmd = &st->cmd;
- struct pohmelfs_mcache *m;
- short err = (signed short)cmd->ext;
- u64 id = cmd->id;
-
- m = pohmelfs_mcache_search(psb, id);
-
- dprintk("%s: id: %llu, gen: %llu, err: %d.\n",
- __func__, cmd->id, (m) ? m->gen : 0, err);
-
- if (!m) {
- pohmelfs_data_recv(st, st->data, cmd->size);
- printk("%s: failed to find data lock response: id: %llu.\n", __func__, cmd->id);
- return -ENOENT;
- }
-
- if (cmd->size)
- err = pohmelfs_data_recv_and_check(st, &m->info, cmd->size);
-
- m->err = err;
- complete(&m->complete);
- pohmelfs_mcache_put(psb, m);
-
- return err;
-}
-
-static void __inline__ netfs_state_reset(struct netfs_state *st)
-{
- netfs_state_lock_send(st);
- netfs_state_exit(st);
- netfs_state_init(st);
- netfs_state_unlock_send(st);
-}
-
-/*
- * Main receiving function, called from dedicated kernel thread.
- */
-static int pohmelfs_recv(void *data)
-{
- int err = -EINTR;
- struct netfs_state *st = data;
- struct netfs_cmd *cmd = &st->cmd;
-
- while (!kthread_should_stop()) {
- /*
- * If socket will be reset after this statement, then
- * pohmelfs_data_recv() will just fail and loop will
- * start again, so it can be done without any locks.
- *
- * st->read_socket is needed to prevents state machine
- * breaking between this data reading and subsequent one
- * in protocol specific functions during connection reset.
- * In case of reset we have to read next command and do
- * not expect data for old command to magically appear in
- * new connection.
- */
- st->read_socket = st->socket;
- err = pohmelfs_data_recv(st, cmd, sizeof(struct netfs_cmd));
- if (err) {
- msleep(1000);
- continue;
- }
-
- netfs_convert_cmd(cmd);
-
- dprintk("%s: cmd: %u, id: %llu, start: %llu, size: %u, "
- "ext: %u, csize: %u, cpad: %u.\n",
- __func__, cmd->cmd, cmd->id, cmd->start,
- cmd->size, cmd->ext, cmd->csize, cmd->cpad);
-
- if (cmd->csize) {
- struct pohmelfs_crypto_engine *e = &st->eng;
-
- if (unlikely(cmd->csize > e->size/2)) {
- netfs_state_reset(st);
- continue;
- }
-
- if (e->hash && unlikely(cmd->csize != st->psb->crypto_attached_size)) {
- dprintk("%s: cmd: cmd: %u, id: %llu, start: %llu, size: %u, "
- "csize: %u != digest size %u.\n",
- __func__, cmd->cmd, cmd->id, cmd->start, cmd->size,
- cmd->csize, st->psb->crypto_attached_size);
- netfs_state_reset(st);
- continue;
- }
-
- err = pohmelfs_data_recv(st, e->data, cmd->csize);
- if (err) {
- netfs_state_reset(st);
- continue;
- }
-
-#ifdef CONFIG_POHMELFS_DEBUG
- {
- unsigned int i;
- unsigned char *hash = e->data;
-
- dprintk("%s: received hash: ", __func__);
- for (i = 0; i < cmd->csize; ++i)
- printk("%02x ", hash[i]);
-
- printk("\n");
- }
-#endif
- cmd->size -= cmd->csize;
- }
-
- /*
- * This should catch protocol breakage and random garbage instead of commands.
- */
- if (unlikely((cmd->size > st->size) && (cmd->cmd != NETFS_XATTR_GET))) {
- netfs_state_reset(st);
- continue;
- }
-
- switch (cmd->cmd) {
- case NETFS_READ_PAGE:
- err = pohmelfs_read_page_response(st);
- break;
- case NETFS_READDIR:
- err = pohmelfs_readdir_response(st);
- break;
- case NETFS_LOOKUP:
- err = pohmelfs_lookup_response(st);
- break;
- case NETFS_CREATE:
- err = pohmelfs_create_response(st);
- break;
- case NETFS_REMOVE:
- err = pohmelfs_remove_response(st);
- break;
- case NETFS_TRANS:
- err = pohmelfs_transaction_response(st);
- break;
- case NETFS_PAGE_CACHE:
- err = pohmelfs_page_cache_response(st);
- break;
- case NETFS_CAPABILITIES:
- err = pohmelfs_capabilities_response(st);
- break;
- case NETFS_LOCK:
- err = pohmelfs_data_lock_response(st);
- break;
- case NETFS_XATTR_GET:
- err = pohmelfs_getxattr_response(st);
- break;
- default:
- printk("%s: wrong cmd: %u, id: %llu, start: %llu, size: %u, ext: %u.\n",
- __func__, cmd->cmd, cmd->id, cmd->start, cmd->size, cmd->ext);
- netfs_state_reset(st);
- break;
- }
- }
-
- while (!kthread_should_stop())
- schedule_timeout_uninterruptible(msecs_to_jiffies(10));
-
- return err;
-}
-
-int netfs_state_init(struct netfs_state *st)
-{
- int err;
- struct pohmelfs_ctl *ctl = &st->ctl;
-
- err = sock_create(ctl->addr.sa_family, ctl->type, ctl->proto, &st->socket);
- if (err) {
- printk("%s: failed to create a socket: family: %d, type: %d, proto: %d, err: %d.\n",
- __func__, ctl->addr.sa_family, ctl->type, ctl->proto, err);
- goto err_out_exit;
- }
-
- st->socket->sk->sk_allocation = GFP_NOIO;
- st->socket->sk->sk_sndtimeo = st->socket->sk->sk_rcvtimeo = msecs_to_jiffies(60000);
-
- err = kernel_connect(st->socket, (struct sockaddr *)&ctl->addr, ctl->addrlen, 0);
- if (err) {
- printk("%s: failed to connect to server: idx: %u, err: %d.\n",
- __func__, st->psb->idx, err);
- goto err_out_release;
- }
- st->socket->sk->sk_sndtimeo = st->socket->sk->sk_rcvtimeo = msecs_to_jiffies(60000);
-
- err = netfs_poll_init(st);
- if (err)
- goto err_out_release;
-
- if (st->socket->ops->family == AF_INET) {
- struct sockaddr_in *sin = (struct sockaddr_in *)&ctl->addr;
- printk(KERN_INFO "%s: (re)connected to peer %pi4:%d.\n", __func__,
- &sin->sin_addr.s_addr, ntohs(sin->sin_port));
- } else if (st->socket->ops->family == AF_INET6) {
- struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&ctl->addr;
- printk(KERN_INFO "%s: (re)connected to peer %pi6:%d", __func__,
- &sin->sin6_addr, ntohs(sin->sin6_port));
- }
-
- return 0;
-
-err_out_release:
- sock_release(st->socket);
-err_out_exit:
- st->socket = NULL;
- return err;
-}
-
-void netfs_state_exit(struct netfs_state *st)
-{
- if (st->socket) {
- netfs_poll_exit(st);
- st->socket->ops->shutdown(st->socket, 2);
-
- if (st->socket->ops->family == AF_INET) {
- struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr;
- printk(KERN_INFO "%s: disconnected from peer %pi4:%d.\n", __func__,
- &sin->sin_addr.s_addr, ntohs(sin->sin_port));
- } else if (st->socket->ops->family == AF_INET6) {
- struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr;
- printk(KERN_INFO "%s: disconnected from peer %pi6:%d", __func__,
- &sin->sin6_addr, ntohs(sin->sin6_port));
- }
-
- sock_release(st->socket);
- st->socket = NULL;
- st->read_socket = NULL;
- st->need_reset = 0;
- }
-}
-
-int pohmelfs_state_init_one(struct pohmelfs_sb *psb, struct pohmelfs_config *conf)
-{
- struct netfs_state *st = &conf->state;
- int err = -ENOMEM;
-
- mutex_init(&st->__state_lock);
- mutex_init(&st->__state_send_lock);
- init_waitqueue_head(&st->thread_wait);
-
- st->psb = psb;
- st->trans_root = RB_ROOT;
- mutex_init(&st->trans_lock);
-
- st->size = psb->trans_data_size;
- st->data = kmalloc(st->size, GFP_KERNEL);
- if (!st->data)
- goto err_out_exit;
-
- if (psb->perform_crypto) {
- err = pohmelfs_crypto_engine_init(&st->eng, psb);
- if (err)
- goto err_out_free_data;
- }
-
- err = netfs_state_init(st);
- if (err)
- goto err_out_free_engine;
-
- st->thread = kthread_run(pohmelfs_recv, st, "pohmelfs/%u", psb->idx);
- if (IS_ERR(st->thread)) {
- err = PTR_ERR(st->thread);
- goto err_out_netfs_exit;
- }
-
- if (!psb->active_state)
- psb->active_state = conf;
-
- dprintk("%s: conf: %p, st: %p, socket: %p.\n",
- __func__, conf, st, st->socket);
- return 0;
-
-err_out_netfs_exit:
- netfs_state_exit(st);
-err_out_free_engine:
- pohmelfs_crypto_engine_exit(&st->eng);
-err_out_free_data:
- kfree(st->data);
-err_out_exit:
- return err;
-
-}
-
-void pohmelfs_state_flush_transactions(struct netfs_state *st)
-{
- struct rb_node *rb_node;
- struct netfs_trans_dst *dst;
-
- mutex_lock(&st->trans_lock);
- for (rb_node = rb_first(&st->trans_root); rb_node; ) {
- dst = rb_entry(rb_node, struct netfs_trans_dst, state_entry);
- rb_node = rb_next(rb_node);
-
- dst->trans->result = -EINVAL;
- netfs_trans_remove_nolock(dst, st);
- netfs_trans_drop_dst_nostate(dst);
- }
- mutex_unlock(&st->trans_lock);
-}
-
-static void pohmelfs_state_exit_one(struct pohmelfs_config *c)
-{
- struct netfs_state *st = &c->state;
-
- dprintk("%s: exiting, st: %p.\n", __func__, st);
- if (st->thread) {
- kthread_stop(st->thread);
- st->thread = NULL;
- }
-
- netfs_state_lock_send(st);
- netfs_state_exit(st);
- netfs_state_unlock_send(st);
-
- pohmelfs_state_flush_transactions(st);
-
- pohmelfs_crypto_engine_exit(&st->eng);
- kfree(st->data);
-
- kfree(c);
-}
-
-/*
- * Initialize network stack. It searches for given ID in global
- * configuration table, this contains information of the remote server
- * (address (any supported by socket interface) and port, protocol and so on).
- */
-int pohmelfs_state_init(struct pohmelfs_sb *psb)
-{
- int err = -ENOMEM;
-
- err = pohmelfs_copy_config(psb);
- if (err) {
- pohmelfs_state_exit(psb);
- return err;
- }
-
- return 0;
-}
-
-void pohmelfs_state_exit(struct pohmelfs_sb *psb)
-{
- struct pohmelfs_config *c, *tmp;
-
- list_for_each_entry_safe(c, tmp, &psb->state_list, config_entry) {
- list_del(&c->config_entry);
- pohmelfs_state_exit_one(c);
- }
-}
-
-void pohmelfs_switch_active(struct pohmelfs_sb *psb)
-{
- struct pohmelfs_config *c = psb->active_state;
-
- if (!list_empty(&psb->state_list)) {
- if (c->config_entry.next != &psb->state_list) {
- psb->active_state = list_entry(c->config_entry.next,
- struct pohmelfs_config, config_entry);
- } else {
- psb->active_state = list_entry(psb->state_list.next,
- struct pohmelfs_config, config_entry);
- }
-
- dprintk("%s: empty: %d, active %p -> %p.\n",
- __func__, list_empty(&psb->state_list), c,
- psb->active_state);
- } else
- psb->active_state = NULL;
-}
-
-void pohmelfs_check_states(struct pohmelfs_sb *psb)
-{
- struct pohmelfs_config *c, *tmp;
- LIST_HEAD(delete_list);
-
- mutex_lock(&psb->state_lock);
- list_for_each_entry_safe(c, tmp, &psb->state_list, config_entry) {
- if (pohmelfs_config_check(c, psb->idx)) {
-
- if (psb->active_state == c)
- pohmelfs_switch_active(psb);
- list_move(&c->config_entry, &delete_list);
- }
- }
- pohmelfs_copy_config(psb);
- mutex_unlock(&psb->state_lock);
-
- list_for_each_entry_safe(c, tmp, &delete_list, config_entry) {
- list_del(&c->config_entry);
- pohmelfs_state_exit_one(c);
- }
-}
+++ /dev/null
-/*
- * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __NETFS_H
-#define __NETFS_H
-
-#include <linux/types.h>
-#include <linux/connector.h>
-#include <linux/backing-dev.h>
-
-#define POHMELFS_CN_IDX 5
-#define POHMELFS_CN_VAL 0
-
-#define POHMELFS_CTLINFO_ACK 1
-#define POHMELFS_NOINFO_ACK 2
-
-#define POHMELFS_NULL_IDX 65535
-
-/*
- * Network command structure.
- * Will be extended.
- */
-struct netfs_cmd {
- __u16 cmd; /* Command number */
- __u16 csize; /* Attached crypto information size */
- __u16 cpad; /* Attached padding size */
- __u16 ext; /* External flags */
- __u32 size; /* Size of the attached data */
- __u32 trans; /* Transaction id */
- __u64 id; /* Object ID to operate on. Used for feedback.*/
- __u64 start; /* Start of the object. */
- __u64 iv; /* IV sequence */
- __u8 data[0];
-};
-
-static inline void netfs_convert_cmd(struct netfs_cmd *cmd)
-{
- cmd->id = __be64_to_cpu(cmd->id);
- cmd->start = __be64_to_cpu(cmd->start);
- cmd->iv = __be64_to_cpu(cmd->iv);
- cmd->cmd = __be16_to_cpu(cmd->cmd);
- cmd->ext = __be16_to_cpu(cmd->ext);
- cmd->csize = __be16_to_cpu(cmd->csize);
- cmd->cpad = __be16_to_cpu(cmd->cpad);
- cmd->size = __be32_to_cpu(cmd->size);
-}
-
-#define NETFS_TRANS_SINGLE_DST (1<<0)
-
-enum {
- NETFS_READDIR = 1, /* Read directory for given inode number */
- NETFS_READ_PAGE, /* Read data page from the server */
- NETFS_WRITE_PAGE, /* Write data page to the server */
- NETFS_CREATE, /* Create directory entry */
- NETFS_REMOVE, /* Remove directory entry */
-
- NETFS_LOOKUP, /* Lookup single object */
- NETFS_LINK, /* Create a link */
- NETFS_TRANS, /* Transaction */
- NETFS_OPEN, /* Open intent */
- NETFS_INODE_INFO, /* Metadata cache coherency synchronization message */
-
- NETFS_PAGE_CACHE, /* Page cache invalidation message */
- NETFS_READ_PAGES, /* Read multiple contiguous pages in one go */
- NETFS_RENAME, /* Rename object */
- NETFS_CAPABILITIES, /* Capabilities of the client, for example supported crypto */
- NETFS_LOCK, /* Distributed lock message */
-
- NETFS_XATTR_SET, /* Set extended attribute */
- NETFS_XATTR_GET, /* Get extended attribute */
- NETFS_CMD_MAX
-};
-
-enum {
- POHMELFS_FLAGS_ADD = 0, /* Network state control message for ADD */
- POHMELFS_FLAGS_DEL, /* Network state control message for DEL */
- POHMELFS_FLAGS_SHOW, /* Network state control message for SHOW */
- POHMELFS_FLAGS_CRYPTO, /* Crypto data control message */
- POHMELFS_FLAGS_MODIFY, /* Network state modification message */
- POHMELFS_FLAGS_DUMP, /* Network state control message for SHOW ALL */
- POHMELFS_FLAGS_FLUSH, /* Network state control message for FLUSH */
-};
-
-/*
- * Always wanted to copy it from socket headers into public one,
- * since they are __KERNEL__ protected there.
- */
-#define _K_SS_MAXSIZE 128
-
-struct saddr {
- unsigned short sa_family;
- char addr[_K_SS_MAXSIZE];
-};
-
-enum {
- POHMELFS_CRYPTO_HASH = 0,
- POHMELFS_CRYPTO_CIPHER,
-};
-
-struct pohmelfs_crypto {
- unsigned int idx; /* Config index */
- unsigned short strlen; /* Size of the attached crypto string including 0-byte
- * "cbc(aes)" for example */
- unsigned short type; /* HMAC, cipher, both */
- unsigned int keysize; /* Key size */
- unsigned char data[0]; /* Algorithm string, key and IV */
-};
-
-#define POHMELFS_IO_PERM_READ (1<<0)
-#define POHMELFS_IO_PERM_WRITE (1<<1)
-
-/*
- * Configuration command used to create table of different remote servers.
- */
-struct pohmelfs_ctl {
- __u32 idx; /* Config index */
- __u32 type; /* Socket type */
- __u32 proto; /* Socket protocol */
- __u16 addrlen; /* Size of the address */
- __u16 perm; /* IO permission */
- __u16 prio; /* IO priority */
- struct saddr addr; /* Remote server address */
-};
-
-/*
- * Ack for userspace about requested command.
- */
-struct pohmelfs_cn_ack {
- struct cn_msg msg;
- int error;
- int msg_num;
- int unused[3];
- struct pohmelfs_ctl ctl;
-};
-
-/*
- * Inode info structure used to sync with server.
- * Check what stat() returns.
- */
-struct netfs_inode_info {
- unsigned int mode;
- unsigned int nlink;
- unsigned int uid;
- unsigned int gid;
- unsigned int blocksize;
- unsigned int padding;
- __u64 ino;
- __u64 blocks;
- __u64 rdev;
- __u64 size;
- __u64 version;
-};
-
-static inline void netfs_convert_inode_info(struct netfs_inode_info *info)
-{
- info->mode = __cpu_to_be32(info->mode);
- info->nlink = __cpu_to_be32(info->nlink);
- info->uid = __cpu_to_be32(info->uid);
- info->gid = __cpu_to_be32(info->gid);
- info->blocksize = __cpu_to_be32(info->blocksize);
- info->blocks = __cpu_to_be64(info->blocks);
- info->rdev = __cpu_to_be64(info->rdev);
- info->size = __cpu_to_be64(info->size);
- info->version = __cpu_to_be64(info->version);
- info->ino = __cpu_to_be64(info->ino);
-}
-
-/*
- * Cache state machine.
- */
-enum {
- NETFS_COMMAND_PENDING = 0, /* Command is being executed */
- NETFS_INODE_REMOTE_SYNCED, /* Inode was synced to server */
- NETFS_INODE_REMOTE_DIR_SYNCED, /* Inode (directory) was synced from the server */
- NETFS_INODE_OWNED, /* Inode is owned by given host */
- NETFS_INODE_NEED_FLUSH, /* Inode has to be flushed to the server */
-};
-
-/*
- * POHMELFS capabilities: information about supported
- * crypto operations (hash/cipher, modes, key sizes and so on),
- * root information (used/available size, number of objects, permissions)
- */
-enum pohmelfs_capabilities {
- POHMELFS_CRYPTO_CAPABILITIES = 0,
- POHMELFS_ROOT_CAPABILITIES,
-};
-
-/* Read-only mount */
-#define POHMELFS_FLAGS_RO (1<<0)
-/* Extended attributes support on/off */
-#define POHMELFS_FLAGS_XATTR (1<<1)
-
-struct netfs_root_capabilities {
- __u64 nr_files;
- __u64 used, avail;
- __u64 flags;
-};
-
-static inline void netfs_convert_root_capabilities(struct netfs_root_capabilities *cap)
-{
- cap->nr_files = __cpu_to_be64(cap->nr_files);
- cap->used = __cpu_to_be64(cap->used);
- cap->avail = __cpu_to_be64(cap->avail);
- cap->flags = __cpu_to_be64(cap->flags);
-}
-
-struct netfs_crypto_capabilities {
- unsigned short hash_strlen; /* Hash string length, like "hmac(sha1) including 0 byte "*/
- unsigned short cipher_strlen; /* Cipher string length with the same format */
- unsigned int cipher_keysize; /* Cipher key size */
-};
-
-static inline void netfs_convert_crypto_capabilities(struct netfs_crypto_capabilities *cap)
-{
- cap->hash_strlen = __cpu_to_be16(cap->hash_strlen);
- cap->cipher_strlen = __cpu_to_be16(cap->cipher_strlen);
- cap->cipher_keysize = __cpu_to_be32(cap->cipher_keysize);
-}
-
-enum pohmelfs_lock_type {
- POHMELFS_LOCK_GRAB = (1<<15),
-
- POHMELFS_READ_LOCK = 0,
- POHMELFS_WRITE_LOCK,
-};
-
-struct netfs_lock {
- __u64 start;
- __u64 ino;
- __u32 size;
- __u32 type;
-};
-
-static inline void netfs_convert_lock(struct netfs_lock *lock)
-{
- lock->start = __cpu_to_be64(lock->start);
- lock->ino = __cpu_to_be64(lock->ino);
- lock->size = __cpu_to_be32(lock->size);
- lock->type = __cpu_to_be32(lock->type);
-}
-
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <linux/completion.h>
-#include <linux/rbtree.h>
-#include <linux/net.h>
-#include <linux/poll.h>
-
-/*
- * Private POHMELFS cache of objects in directory.
- */
-struct pohmelfs_name {
- struct rb_node hash_node;
-
- struct list_head sync_create_entry;
-
- u64 ino;
-
- u32 hash;
- u32 mode;
- u32 len;
-
- char *data;
-};
-
-/*
- * POHMELFS inode. Main object.
- */
-struct pohmelfs_inode {
- struct list_head inode_entry; /* Entry in superblock list.
- * Objects which are not bound to dentry require to be dropped
- * in ->put_super()
- */
- struct rb_root hash_root; /* The same, but indexed by name hash and len */
- struct mutex offset_lock; /* Protect both above trees */
-
- struct list_head sync_create_list; /* List of created but not yet synced to the server children */
-
- unsigned int drop_count;
-
- int lock_type; /* How this inode is locked: read or write */
-
- int error; /* Transaction error for given inode */
-
- long state; /* State machine above */
-
- u64 ino; /* Inode number */
- u64 total_len; /* Total length of all children names, used to create offsets */
-
- struct inode vfs_inode;
-};
-
-struct netfs_trans;
-typedef int (*netfs_trans_complete_t)(struct page **pages, unsigned int page_num,
- void *private, int err);
-
-struct netfs_state;
-struct pohmelfs_sb;
-
-struct netfs_trans {
- /*
- * Transaction header and attached contiguous data live here.
- */
- struct iovec iovec;
-
- /*
- * Pages attached to transaction.
- */
- struct page **pages;
-
- /*
- * List and protecting lock for transaction destination
- * network states.
- */
- spinlock_t dst_lock;
- struct list_head dst_list;
-
- /*
- * Number of users for given transaction.
- * For example each network state attached to transaction
- * via dst_list increases it.
- */
- atomic_t refcnt;
-
- /*
- * Number of pages attached to given transaction.
- * Some slots in above page array can be NULL, since
- * for example page can be under writeback already,
- * so we skip it in this transaction.
- */
- unsigned int page_num;
-
- /*
- * Transaction flags: single dst or broadcast and so on.
- */
- unsigned int flags;
-
- /*
- * Size of the data, which can be placed into
- * iovec.iov_base area.
- */
- unsigned int total_size;
-
- /*
- * Number of pages to be sent to remote server.
- * Usually equal to above page_num, but in case of partial
- * writeback it can accumulate only pages already completed
- * previous writeback.
- */
- unsigned int attached_pages;
-
- /*
- * Attached number of bytes in all above pages.
- */
- unsigned int attached_size;
-
- /*
- * Unique transacton generation number.
- * Used as identity in the network state tree of transactions.
- */
- unsigned int gen;
-
- /*
- * Transaction completion status.
- */
- int result;
-
- /*
- * Superblock this transaction belongs to
- */
- struct pohmelfs_sb *psb;
-
- /*
- * Crypto engine, which processed this transaction.
- * Can be not NULL only if crypto engine holds encrypted pages.
- */
- struct pohmelfs_crypto_engine *eng;
-
- /* Private data */
- void *private;
-
- /* Completion callback, invoked just before transaction is destroyed */
- netfs_trans_complete_t complete;
-};
-
-static inline int netfs_trans_cur_len(struct netfs_trans *t)
-{
- return (signed)(t->total_size - t->iovec.iov_len);
-}
-
-static inline void *netfs_trans_current(struct netfs_trans *t)
-{
- return t->iovec.iov_base + t->iovec.iov_len;
-}
-
-struct netfs_trans *netfs_trans_alloc(struct pohmelfs_sb *psb, unsigned int size,
- unsigned int flags, unsigned int nr);
-void netfs_trans_free(struct netfs_trans *t);
-int netfs_trans_finish(struct netfs_trans *t, struct pohmelfs_sb *psb);
-int netfs_trans_finish_send(struct netfs_trans *t, struct pohmelfs_sb *psb);
-
-static inline void netfs_trans_reset(struct netfs_trans *t)
-{
- t->complete = NULL;
-}
-
-struct netfs_trans_dst {
- struct list_head trans_entry;
- struct rb_node state_entry;
-
- unsigned long send_time;
-
- /*
- * Times this transaction was resent to its old or new,
- * depending on flags, destinations. When it reaches maximum
- * allowed number, specified in superblock->trans_retries,
- * transaction will be freed with ETIMEDOUT error.
- */
- unsigned int retries;
-
- struct netfs_trans *trans;
- struct netfs_state *state;
-};
-
-struct netfs_trans_dst *netfs_trans_search(struct netfs_state *st, unsigned int gen);
-void netfs_trans_drop_dst(struct netfs_trans_dst *dst);
-void netfs_trans_drop_dst_nostate(struct netfs_trans_dst *dst);
-void netfs_trans_drop_trans(struct netfs_trans *t, struct netfs_state *st);
-void netfs_trans_drop_last(struct netfs_trans *t, struct netfs_state *st);
-int netfs_trans_resend(struct netfs_trans *t, struct pohmelfs_sb *psb);
-int netfs_trans_remove_nolock(struct netfs_trans_dst *dst, struct netfs_state *st);
-
-int netfs_trans_init(void);
-void netfs_trans_exit(void);
-
-struct pohmelfs_crypto_engine {
- u64 iv; /* Crypto IV for current operation */
- unsigned long timeout; /* Crypto waiting timeout */
- unsigned int size; /* Size of crypto scratchpad */
- void *data; /* Temporal crypto scratchpad */
- /*
- * Crypto operations performed on objects.
- */
- struct crypto_hash *hash;
- struct crypto_ablkcipher *cipher;
-
- struct pohmelfs_crypto_thread *thread; /* Crypto thread which hosts this engine */
-
- struct page **pages;
- unsigned int page_num;
-};
-
-struct pohmelfs_crypto_thread {
- struct list_head thread_entry;
-
- struct task_struct *thread;
- struct pohmelfs_sb *psb;
-
- struct pohmelfs_crypto_engine eng;
-
- struct netfs_trans *trans;
-
- wait_queue_head_t wait;
- int error;
-
- unsigned int size;
- struct page *page;
-};
-
-void pohmelfs_crypto_thread_make_ready(struct pohmelfs_crypto_thread *th);
-
-/*
- * Network state, attached to one server.
- */
-struct netfs_state {
- struct mutex __state_lock; /* Can not allow to use the same socket simultaneously */
- struct mutex __state_send_lock;
- struct netfs_cmd cmd; /* Cached command */
- struct netfs_inode_info info; /* Cached inode info */
-
- void *data; /* Cached some data */
- unsigned int size; /* Size of that data */
-
- struct pohmelfs_sb *psb; /* Superblock */
-
- struct task_struct *thread; /* Async receiving thread */
-
- /* Waiting/polling machinery */
- wait_queue_t wait;
- wait_queue_head_t *whead;
- wait_queue_head_t thread_wait;
-
- struct mutex trans_lock;
- struct rb_root trans_root;
-
- struct pohmelfs_ctl ctl; /* Remote peer */
-
- struct socket *socket; /* Socket object */
- struct socket *read_socket; /* Cached pointer to socket object.
- * Used to determine if between lock drops socket was changed.
- * Never used to read data or any kind of access.
- */
- /*
- * Crypto engines to process incoming data.
- */
- struct pohmelfs_crypto_engine eng;
-
- int need_reset;
-};
-
-int netfs_state_init(struct netfs_state *st);
-void netfs_state_exit(struct netfs_state *st);
-
-static inline void netfs_state_lock_send(struct netfs_state *st)
-{
- mutex_lock(&st->__state_send_lock);
-}
-
-static inline int netfs_state_trylock_send(struct netfs_state *st)
-{
- return mutex_trylock(&st->__state_send_lock);
-}
-
-static inline void netfs_state_unlock_send(struct netfs_state *st)
-{
- BUG_ON(!mutex_is_locked(&st->__state_send_lock));
-
- mutex_unlock(&st->__state_send_lock);
-}
-
-static inline void netfs_state_lock(struct netfs_state *st)
-{
- mutex_lock(&st->__state_lock);
-}
-
-static inline void netfs_state_unlock(struct netfs_state *st)
-{
- BUG_ON(!mutex_is_locked(&st->__state_lock));
-
- mutex_unlock(&st->__state_lock);
-}
-
-static inline unsigned int netfs_state_poll(struct netfs_state *st)
-{
- unsigned int revents = POLLHUP | POLLERR;
-
- netfs_state_lock(st);
- if (st->socket)
- revents = st->socket->ops->poll(NULL, st->socket, NULL);
- netfs_state_unlock(st);
-
- return revents;
-}
-
-struct pohmelfs_config;
-
-struct pohmelfs_sb {
- struct rb_root mcache_root;
- struct mutex mcache_lock;
- atomic_long_t mcache_gen;
- unsigned long mcache_timeout;
-
- unsigned int idx;
-
- unsigned int trans_retries;
-
- atomic_t trans_gen;
-
- unsigned int crypto_attached_size;
- unsigned int crypto_align_size;
-
- unsigned int crypto_fail_unsupported;
-
- unsigned int crypto_thread_num;
- struct list_head crypto_active_list, crypto_ready_list;
- struct mutex crypto_thread_lock;
-
- unsigned int trans_max_pages;
- unsigned long trans_data_size;
- unsigned long trans_timeout;
-
- unsigned long drop_scan_timeout;
- unsigned long trans_scan_timeout;
-
- unsigned long wait_on_page_timeout;
-
- struct list_head flush_list;
- struct list_head drop_list;
- spinlock_t ino_lock;
- u64 ino;
-
- /*
- * Remote nodes POHMELFS connected to.
- */
- struct list_head state_list;
- struct mutex state_lock;
-
- /*
- * Currently active state to request data from.
- */
- struct pohmelfs_config *active_state;
-
-
- wait_queue_head_t wait;
-
- /*
- * Timed checks: stale transactions, inodes to be freed and so on.
- */
- struct delayed_work dwork;
- struct delayed_work drop_dwork;
-
- struct super_block *sb;
-
- struct backing_dev_info bdi;
-
- /*
- * Algorithm strings.
- */
- char *hash_string;
- char *cipher_string;
-
- u8 *hash_key;
- u8 *cipher_key;
-
- /*
- * Algorithm string lengths.
- */
- unsigned int hash_strlen;
- unsigned int cipher_strlen;
- unsigned int hash_keysize;
- unsigned int cipher_keysize;
-
- /*
- * Controls whether to perfrom crypto processing or not.
- */
- int perform_crypto;
-
- /*
- * POHMELFS statistics.
- */
- u64 total_size;
- u64 avail_size;
- atomic_long_t total_inodes;
-
- /*
- * Xattr support, read-only and so on.
- */
- u64 state_flags;
-
- /*
- * Temporary storage to detect changes in the wait queue.
- */
- long flags;
-};
-
-static inline void netfs_trans_update(struct netfs_cmd *cmd,
- struct netfs_trans *t, unsigned int size)
-{
- unsigned int sz = ALIGN(size, t->psb->crypto_align_size);
-
- t->iovec.iov_len += sizeof(struct netfs_cmd) + sz;
- cmd->cpad = __cpu_to_be16(sz - size);
-}
-
-static inline struct pohmelfs_sb *POHMELFS_SB(struct super_block *sb)
-{
- return sb->s_fs_info;
-}
-
-static inline struct pohmelfs_inode *POHMELFS_I(struct inode *inode)
-{
- return container_of(inode, struct pohmelfs_inode, vfs_inode);
-}
-
-static inline u64 pohmelfs_new_ino(struct pohmelfs_sb *psb)
-{
- u64 ino;
-
- spin_lock(&psb->ino_lock);
- ino = psb->ino++;
- spin_unlock(&psb->ino_lock);
-
- return ino;
-}
-
-static inline void pohmelfs_put_inode(struct pohmelfs_inode *pi)
-{
- struct pohmelfs_sb *psb = POHMELFS_SB(pi->vfs_inode.i_sb);
-
- spin_lock(&psb->ino_lock);
- list_move_tail(&pi->inode_entry, &psb->drop_list);
- pi->drop_count++;
- spin_unlock(&psb->ino_lock);
-}
-
-struct pohmelfs_config {
- struct list_head config_entry;
-
- struct netfs_state state;
-};
-
-struct pohmelfs_config_group {
- /*
- * Entry in the global config group list.
- */
- struct list_head group_entry;
-
- /*
- * Index of the current group.
- */
- unsigned int idx;
- /*
- * Number of config_list entries in this group entry.
- */
- unsigned int num_entry;
- /*
- * Algorithm strings.
- */
- char *hash_string;
- char *cipher_string;
-
- /*
- * Algorithm string lengths.
- */
- unsigned int hash_strlen;
- unsigned int cipher_strlen;
-
- /*
- * Key and its size.
- */
- unsigned int hash_keysize;
- unsigned int cipher_keysize;
- u8 *hash_key;
- u8 *cipher_key;
-
- /*
- * List of config entries (network state info) for given idx.
- */
- struct list_head config_list;
-};
-
-int __init pohmelfs_config_init(void);
-void pohmelfs_config_exit(void);
-int pohmelfs_copy_config(struct pohmelfs_sb *psb);
-int pohmelfs_copy_crypto(struct pohmelfs_sb *psb);
-int pohmelfs_config_check(struct pohmelfs_config *config, int idx);
-int pohmelfs_state_init_one(struct pohmelfs_sb *psb, struct pohmelfs_config *conf);
-
-extern const struct file_operations pohmelfs_dir_fops;
-extern const struct inode_operations pohmelfs_dir_inode_ops;
-
-int pohmelfs_state_init(struct pohmelfs_sb *psb);
-void pohmelfs_state_exit(struct pohmelfs_sb *psb);
-void pohmelfs_state_flush_transactions(struct netfs_state *st);
-
-void pohmelfs_fill_inode(struct inode *inode, struct netfs_inode_info *info);
-
-void pohmelfs_name_del(struct pohmelfs_inode *parent, struct pohmelfs_name *n);
-void pohmelfs_free_names(struct pohmelfs_inode *parent);
-struct pohmelfs_name *pohmelfs_search_hash(struct pohmelfs_inode *pi, u32 hash);
-
-void pohmelfs_inode_del_inode(struct pohmelfs_sb *psb, struct pohmelfs_inode *pi);
-
-struct pohmelfs_inode *pohmelfs_create_entry_local(struct pohmelfs_sb *psb,
- struct pohmelfs_inode *parent, struct qstr *str, u64 start, umode_t mode);
-
-int pohmelfs_write_create_inode(struct pohmelfs_inode *pi);
-
-int pohmelfs_write_inode_create(struct inode *inode, struct netfs_trans *trans);
-int pohmelfs_remove_child(struct pohmelfs_inode *parent, struct pohmelfs_name *n);
-
-struct pohmelfs_inode *pohmelfs_new_inode(struct pohmelfs_sb *psb,
- struct pohmelfs_inode *parent, struct qstr *str,
- struct netfs_inode_info *info, int link);
-
-int pohmelfs_setattr(struct dentry *dentry, struct iattr *attr);
-int pohmelfs_setattr_raw(struct inode *inode, struct iattr *attr);
-
-int pohmelfs_meta_command(struct pohmelfs_inode *pi, unsigned int cmd_op, unsigned int flags,
- netfs_trans_complete_t complete, void *priv, u64 start);
-int pohmelfs_meta_command_data(struct pohmelfs_inode *pi, u64 id, unsigned int cmd_op, char *addon,
- unsigned int flags, netfs_trans_complete_t complete, void *priv, u64 start);
-
-void pohmelfs_check_states(struct pohmelfs_sb *psb);
-void pohmelfs_switch_active(struct pohmelfs_sb *psb);
-
-int pohmelfs_construct_path_string(struct pohmelfs_inode *pi, void *data, int len);
-int pohmelfs_path_length(struct pohmelfs_inode *pi);
-
-struct pohmelfs_crypto_completion {
- struct completion complete;
- int error;
-};
-
-int pohmelfs_trans_crypt(struct netfs_trans *t, struct pohmelfs_sb *psb);
-void pohmelfs_crypto_exit(struct pohmelfs_sb *psb);
-int pohmelfs_crypto_init(struct pohmelfs_sb *psb);
-
-int pohmelfs_crypto_engine_init(struct pohmelfs_crypto_engine *e, struct pohmelfs_sb *psb);
-void pohmelfs_crypto_engine_exit(struct pohmelfs_crypto_engine *e);
-
-int pohmelfs_crypto_process_input_data(struct pohmelfs_crypto_engine *e, u64 iv,
- void *data, struct page *page, unsigned int size);
-int pohmelfs_crypto_process_input_page(struct pohmelfs_crypto_engine *e,
- struct page *page, unsigned int size, u64 iv);
-
-static inline u64 pohmelfs_gen_iv(struct netfs_trans *t)
-{
- u64 iv = t->gen;
-
- iv <<= 32;
- iv |= ((unsigned long)t) & 0xffffffff;
-
- return iv;
-}
-
-int pohmelfs_data_lock(struct pohmelfs_inode *pi, u64 start, u32 size, int type);
-int pohmelfs_data_unlock(struct pohmelfs_inode *pi, u64 start, u32 size, int type);
-int pohmelfs_data_lock_response(struct netfs_state *st);
-
-static inline int pohmelfs_need_lock(struct pohmelfs_inode *pi, int type)
-{
- if (test_bit(NETFS_INODE_OWNED, &pi->state)) {
- if (type == pi->lock_type)
- return 0;
- if ((type == POHMELFS_READ_LOCK) && (pi->lock_type == POHMELFS_WRITE_LOCK))
- return 0;
- }
-
- if (!test_bit(NETFS_INODE_REMOTE_SYNCED, &pi->state))
- return 0;
-
- return 1;
-}
-
-int __init pohmelfs_mcache_init(void);
-void pohmelfs_mcache_exit(void);
-
-/* #define CONFIG_POHMELFS_DEBUG */
-
-#ifdef CONFIG_POHMELFS_DEBUG
-#define dprintka(f, a...) printk(f, ##a)
-#define dprintk(f, a...) printk("%d: " f, task_pid_vnr(current), ##a)
-#else
-#define dprintka(f, a...) do {} while (0)
-#define dprintk(f, a...) do {} while (0)
-#endif
-
-static inline void netfs_trans_get(struct netfs_trans *t)
-{
- atomic_inc(&t->refcnt);
-}
-
-static inline void netfs_trans_put(struct netfs_trans *t)
-{
- if (atomic_dec_and_test(&t->refcnt)) {
- dprintk("%s: t: %p, gen: %u, err: %d.\n",
- __func__, t, t->gen, t->result);
- if (t->complete)
- t->complete(t->pages, t->page_num,
- t->private, t->result);
- netfs_trans_free(t);
- }
-}
-
-struct pohmelfs_mcache {
- struct rb_node mcache_entry;
- struct completion complete;
-
- atomic_t refcnt;
-
- u64 gen;
-
- void *data;
- u64 start;
- u32 size;
- int err;
-
- struct netfs_inode_info info;
-};
-
-struct pohmelfs_mcache *pohmelfs_mcache_alloc(struct pohmelfs_sb *psb, u64 start,
- unsigned int size, void *data);
-void pohmelfs_mcache_free(struct pohmelfs_sb *psb, struct pohmelfs_mcache *m);
-struct pohmelfs_mcache *pohmelfs_mcache_search(struct pohmelfs_sb *psb, u64 gen);
-void pohmelfs_mcache_remove_locked(struct pohmelfs_sb *psb, struct pohmelfs_mcache *m);
-
-static inline void pohmelfs_mcache_get(struct pohmelfs_mcache *m)
-{
- atomic_inc(&m->refcnt);
-}
-
-static inline void pohmelfs_mcache_put(struct pohmelfs_sb *psb,
- struct pohmelfs_mcache *m)
-{
- if (atomic_dec_and_test(&m->refcnt))
- pohmelfs_mcache_free(psb, m);
-}
-
-/*#define POHMELFS_TRUNCATE_ON_INODE_FLUSH
- */
-
-#endif /* __KERNEL__*/
-
-#endif /* __NETFS_H */
+++ /dev/null
-/*
- * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/ktime.h>
-#include <linux/fs_struct.h>
-#include <linux/pagemap.h>
-#include <linux/writeback.h>
-#include <linux/mount.h>
-#include <linux/mm.h>
-
-#include "netfs.h"
-
-#define UNHASHED_OBSCURE_STRING_SIZE sizeof(" (deleted)")
-
-/*
- * Create path from root for given inode.
- * Path is formed as set of stuctures, containing name of the object
- * and its inode data (mode, permissions and so on).
- */
-int pohmelfs_construct_path_string(struct pohmelfs_inode *pi, void *data, int len)
-{
- struct path path;
- struct dentry *d;
- char *ptr;
- int err = 0, strlen, reduce = 0;
-
- d = d_find_alias(&pi->vfs_inode);
- if (!d) {
- printk("%s: no alias, list_empty: %d.\n", __func__, list_empty(&pi->vfs_inode.i_dentry));
- return -ENOENT;
- }
-
- spin_lock(¤t->fs->lock);
- path.mnt = mntget(current->fs->root.mnt);
- spin_unlock(¤t->fs->lock);
-
- path.dentry = d;
-
- if (!IS_ROOT(d) && d_unhashed(d))
- reduce = 1;
-
- ptr = d_path(&path, data, len);
- if (IS_ERR(ptr)) {
- err = PTR_ERR(ptr);
- goto out;
- }
-
- if (reduce && len >= UNHASHED_OBSCURE_STRING_SIZE) {
- char *end = data + len - UNHASHED_OBSCURE_STRING_SIZE;
- *end = '\0';
- }
-
- strlen = len - (ptr - (char *)data);
- memmove(data, ptr, strlen);
- ptr = data;
-
- err = strlen;
-
- dprintk("%s: dname: '%s', len: %u, maxlen: %u, name: '%s', strlen: %d.\n",
- __func__, d->d_name.name, d->d_name.len, len, ptr, strlen);
-
-out:
- dput(d);
- mntput(path.mnt);
-
- return err;
-}
-
-int pohmelfs_path_length(struct pohmelfs_inode *pi)
-{
- struct dentry *d, *root, *first;
- int len;
- unsigned seq;
-
- first = d_find_alias(&pi->vfs_inode);
- if (!first) {
- dprintk("%s: ino: %llu, mode: %o.\n", __func__, pi->ino, pi->vfs_inode.i_mode);
- return -ENOENT;
- }
-
- spin_lock(¤t->fs->lock);
- root = dget(current->fs->root.dentry);
- spin_unlock(¤t->fs->lock);
-
-rename_retry:
- len = 1; /* Root slash */
- d = first;
- seq = read_seqbegin(&rename_lock);
- rcu_read_lock();
-
- if (!IS_ROOT(d) && d_unhashed(d))
- len += UNHASHED_OBSCURE_STRING_SIZE; /* Obscure " (deleted)" string */
-
- while (d && d != root && !IS_ROOT(d)) {
- len += d->d_name.len + 1; /* Plus slash */
- d = d->d_parent;
- }
- rcu_read_unlock();
- if (read_seqretry(&rename_lock, seq))
- goto rename_retry;
-
- dput(root);
- dput(first);
-
- return len + 1; /* Including zero-byte */
-}
+++ /dev/null
-/*
- * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/crypto.h>
-#include <linux/fs.h>
-#include <linux/jhash.h>
-#include <linux/hash.h>
-#include <linux/ktime.h>
-#include <linux/mempool.h>
-#include <linux/mm.h>
-#include <linux/mount.h>
-#include <linux/pagemap.h>
-#include <linux/parser.h>
-#include <linux/poll.h>
-#include <linux/swap.h>
-#include <linux/slab.h>
-#include <linux/statfs.h>
-#include <linux/writeback.h>
-
-#include "netfs.h"
-
-static struct kmem_cache *netfs_trans_dst;
-static mempool_t *netfs_trans_dst_pool;
-
-static void netfs_trans_init_static(struct netfs_trans *t, int num, int size)
-{
- t->page_num = num;
- t->total_size = size;
- atomic_set(&t->refcnt, 1);
-
- spin_lock_init(&t->dst_lock);
- INIT_LIST_HEAD(&t->dst_list);
-}
-
-static int netfs_trans_send_pages(struct netfs_trans *t, struct netfs_state *st)
-{
- int err = 0;
- unsigned int i, attached_pages = t->attached_pages, ci;
- struct msghdr msg;
- struct page **pages = (t->eng) ? t->eng->pages : t->pages;
- struct page *p;
- unsigned int size;
-
- msg.msg_name = NULL;
- msg.msg_namelen = 0;
- msg.msg_control = NULL;
- msg.msg_controllen = 0;
- msg.msg_flags = MSG_WAITALL | MSG_MORE;
-
- ci = 0;
- for (i = 0; i < t->page_num; ++i) {
- struct page *page = pages[ci];
- struct netfs_cmd cmd;
- struct iovec io;
-
- p = t->pages[i];
-
- if (!p)
- continue;
-
- size = page_private(p);
-
- io.iov_base = &cmd;
- io.iov_len = sizeof(struct netfs_cmd);
-
- cmd.cmd = NETFS_WRITE_PAGE;
- cmd.ext = 0;
- cmd.id = 0;
- cmd.size = size;
- cmd.start = p->index;
- cmd.start <<= PAGE_CACHE_SHIFT;
- cmd.csize = 0;
- cmd.cpad = 0;
- cmd.iv = pohmelfs_gen_iv(t);
-
- netfs_convert_cmd(&cmd);
-
- msg.msg_iov = &io;
- msg.msg_iovlen = 1;
- msg.msg_flags = MSG_WAITALL | MSG_MORE;
-
- err = kernel_sendmsg(st->socket, &msg, (struct kvec *)msg.msg_iov, 1, sizeof(struct netfs_cmd));
- if (err <= 0) {
- printk("%s: %d/%d failed to send transaction header: t: %p, gen: %u, err: %d.\n",
- __func__, i, t->page_num, t, t->gen, err);
- if (err == 0)
- err = -ECONNRESET;
- goto err_out;
- }
-
- msg.msg_flags = MSG_WAITALL | (attached_pages == 1 ? 0 :
- MSG_MORE);
-
- err = kernel_sendpage(st->socket, page, 0, size, msg.msg_flags);
- if (err <= 0) {
- printk("%s: %d/%d failed to send transaction page: t: %p, gen: %u, size: %u, err: %d.\n",
- __func__, i, t->page_num, t, t->gen, size, err);
- if (err == 0)
- err = -ECONNRESET;
- goto err_out;
- }
-
- dprintk("%s: %d/%d sent t: %p, gen: %u, page: %p/%p, size: %u.\n",
- __func__, i, t->page_num, t, t->gen, page, p, size);
-
- err = 0;
- attached_pages--;
- if (!attached_pages)
- break;
- ci++;
-
- continue;
-
-err_out:
- printk("%s: t: %p, gen: %u, err: %d.\n", __func__, t, t->gen, err);
- netfs_state_exit(st);
- break;
- }
-
- return err;
-}
-
-int netfs_trans_send(struct netfs_trans *t, struct netfs_state *st)
-{
- int err;
- struct msghdr msg;
-
- BUG_ON(!t->iovec.iov_len);
- BUG_ON(t->iovec.iov_len > 1024*1024*1024);
-
- netfs_state_lock_send(st);
- if (!st->socket) {
- err = netfs_state_init(st);
- if (err)
- goto err_out_unlock_return;
- }
-
- msg.msg_iov = &t->iovec;
- msg.msg_iovlen = 1;
- msg.msg_name = NULL;
- msg.msg_namelen = 0;
- msg.msg_control = NULL;
- msg.msg_controllen = 0;
- msg.msg_flags = MSG_WAITALL;
-
- if (t->attached_pages)
- msg.msg_flags |= MSG_MORE;
-
- err = kernel_sendmsg(st->socket, &msg, (struct kvec *)msg.msg_iov, 1, t->iovec.iov_len);
- if (err <= 0) {
- printk("%s: failed to send contig transaction: t: %p, gen: %u, size: %zu, err: %d.\n",
- __func__, t, t->gen, t->iovec.iov_len, err);
- if (err == 0)
- err = -ECONNRESET;
- goto err_out_unlock_return;
- }
-
- dprintk("%s: sent %s transaction: t: %p, gen: %u, size: %zu, page_num: %u.\n",
- __func__, (t->page_num) ? "partial" : "full",
- t, t->gen, t->iovec.iov_len, t->page_num);
-
- err = 0;
- if (t->attached_pages)
- err = netfs_trans_send_pages(t, st);
-
-err_out_unlock_return:
-
- if (st->need_reset)
- netfs_state_exit(st);
-
- netfs_state_unlock_send(st);
-
- dprintk("%s: t: %p, gen: %u, err: %d.\n",
- __func__, t, t->gen, err);
-
- t->result = err;
- return err;
-}
-
-static inline int netfs_trans_cmp(unsigned int gen, unsigned int new)
-{
- if (gen < new)
- return 1;
- if (gen > new)
- return -1;
- return 0;
-}
-
-struct netfs_trans_dst *netfs_trans_search(struct netfs_state *st, unsigned int gen)
-{
- struct rb_root *root = &st->trans_root;
- struct rb_node *n = root->rb_node;
- struct netfs_trans_dst *tmp, *ret = NULL;
- struct netfs_trans *t;
- int cmp;
-
- while (n) {
- tmp = rb_entry(n, struct netfs_trans_dst, state_entry);
- t = tmp->trans;
-
- cmp = netfs_trans_cmp(t->gen, gen);
- if (cmp < 0)
- n = n->rb_left;
- else if (cmp > 0)
- n = n->rb_right;
- else {
- ret = tmp;
- break;
- }
- }
-
- return ret;
-}
-
-static int netfs_trans_insert(struct netfs_trans_dst *ndst, struct netfs_state *st)
-{
- struct rb_root *root = &st->trans_root;
- struct rb_node **n = &root->rb_node, *parent = NULL;
- struct netfs_trans_dst *ret = NULL, *tmp;
- struct netfs_trans *t = NULL, *new = ndst->trans;
- int cmp;
-
- while (*n) {
- parent = *n;
-
- tmp = rb_entry(parent, struct netfs_trans_dst, state_entry);
- t = tmp->trans;
-
- cmp = netfs_trans_cmp(t->gen, new->gen);
- if (cmp < 0)
- n = &parent->rb_left;
- else if (cmp > 0)
- n = &parent->rb_right;
- else {
- ret = tmp;
- break;
- }
- }
-
- if (ret) {
- printk("%s: exist: old: gen: %u, flags: %x, send_time: %lu, "
- "new: gen: %u, flags: %x, send_time: %lu.\n",
- __func__, t->gen, t->flags, ret->send_time,
- new->gen, new->flags, ndst->send_time);
- return -EEXIST;
- }
-
- rb_link_node(&ndst->state_entry, parent, n);
- rb_insert_color(&ndst->state_entry, root);
- ndst->send_time = jiffies;
-
- return 0;
-}
-
-int netfs_trans_remove_nolock(struct netfs_trans_dst *dst, struct netfs_state *st)
-{
- if (dst && dst->state_entry.rb_parent_color) {
- rb_erase(&dst->state_entry, &st->trans_root);
- dst->state_entry.rb_parent_color = 0;
- return 1;
- }
- return 0;
-}
-
-static int netfs_trans_remove_state(struct netfs_trans_dst *dst)
-{
- int ret;
- struct netfs_state *st = dst->state;
-
- mutex_lock(&st->trans_lock);
- ret = netfs_trans_remove_nolock(dst, st);
- mutex_unlock(&st->trans_lock);
-
- return ret;
-}
-
-/*
- * Create new destination for given transaction associated with given network state.
- * Transaction's reference counter is bumped and will be dropped when either
- * reply is received or when async timeout detection task will fail resending
- * and drop transaction.
- */
-static int netfs_trans_push_dst(struct netfs_trans *t, struct netfs_state *st)
-{
- struct netfs_trans_dst *dst;
- int err;
-
- dst = mempool_alloc(netfs_trans_dst_pool, GFP_KERNEL);
- if (!dst)
- return -ENOMEM;
-
- dst->retries = 0;
- dst->send_time = 0;
- dst->state = st;
- dst->trans = t;
- netfs_trans_get(t);
-
- mutex_lock(&st->trans_lock);
- err = netfs_trans_insert(dst, st);
- mutex_unlock(&st->trans_lock);
-
- if (err)
- goto err_out_free;
-
- spin_lock(&t->dst_lock);
- list_add_tail(&dst->trans_entry, &t->dst_list);
- spin_unlock(&t->dst_lock);
-
- return 0;
-
-err_out_free:
- t->result = err;
- netfs_trans_put(t);
- mempool_free(dst, netfs_trans_dst_pool);
- return err;
-}
-
-static void netfs_trans_free_dst(struct netfs_trans_dst *dst)
-{
- netfs_trans_put(dst->trans);
- mempool_free(dst, netfs_trans_dst_pool);
-}
-
-static void netfs_trans_remove_dst(struct netfs_trans_dst *dst)
-{
- if (netfs_trans_remove_state(dst))
- netfs_trans_free_dst(dst);
-}
-
-/*
- * Drop destination transaction entry when we know it.
- */
-void netfs_trans_drop_dst(struct netfs_trans_dst *dst)
-{
- struct netfs_trans *t = dst->trans;
-
- spin_lock(&t->dst_lock);
- list_del_init(&dst->trans_entry);
- spin_unlock(&t->dst_lock);
-
- netfs_trans_remove_dst(dst);
-}
-
-/*
- * Drop destination transaction entry when we know it and when we
- * already removed dst from state tree.
- */
-void netfs_trans_drop_dst_nostate(struct netfs_trans_dst *dst)
-{
- struct netfs_trans *t = dst->trans;
-
- spin_lock(&t->dst_lock);
- list_del_init(&dst->trans_entry);
- spin_unlock(&t->dst_lock);
-
- netfs_trans_free_dst(dst);
-}
-
-/*
- * This drops destination transaction entry from appropriate network state
- * tree and drops related reference counter. It is possible that transaction
- * will be freed here if its reference counter hits zero.
- * Destination transaction entry will be freed.
- */
-void netfs_trans_drop_trans(struct netfs_trans *t, struct netfs_state *st)
-{
- struct netfs_trans_dst *dst, *tmp, *ret = NULL;
-
- spin_lock(&t->dst_lock);
- list_for_each_entry_safe(dst, tmp, &t->dst_list, trans_entry) {
- if (dst->state == st) {
- ret = dst;
- list_del(&dst->trans_entry);
- break;
- }
- }
- spin_unlock(&t->dst_lock);
-
- if (ret)
- netfs_trans_remove_dst(ret);
-}
-
-/*
- * This drops destination transaction entry from appropriate network state
- * tree and drops related reference counter. It is possible that transaction
- * will be freed here if its reference counter hits zero.
- * Destination transaction entry will be freed.
- */
-void netfs_trans_drop_last(struct netfs_trans *t, struct netfs_state *st)
-{
- struct netfs_trans_dst *dst, *tmp, *ret;
-
- spin_lock(&t->dst_lock);
- ret = list_entry(t->dst_list.prev, struct netfs_trans_dst, trans_entry);
- if (ret->state != st) {
- ret = NULL;
- list_for_each_entry_safe(dst, tmp, &t->dst_list, trans_entry) {
- if (dst->state == st) {
- ret = dst;
- list_del_init(&dst->trans_entry);
- break;
- }
- }
- } else {
- list_del(&ret->trans_entry);
- }
- spin_unlock(&t->dst_lock);
-
- if (ret)
- netfs_trans_remove_dst(ret);
-}
-
-static int netfs_trans_push(struct netfs_trans *t, struct netfs_state *st)
-{
- int err;
-
- err = netfs_trans_push_dst(t, st);
- if (err)
- return err;
-
- err = netfs_trans_send(t, st);
- if (err)
- goto err_out_free;
-
- if (t->flags & NETFS_TRANS_SINGLE_DST)
- pohmelfs_switch_active(st->psb);
-
- return 0;
-
-err_out_free:
- t->result = err;
- netfs_trans_drop_last(t, st);
-
- return err;
-}
-
-int netfs_trans_finish_send(struct netfs_trans *t, struct pohmelfs_sb *psb)
-{
- struct pohmelfs_config *c;
- int err = -ENODEV;
- struct netfs_state *st;
-#if 0
- dprintk("%s: t: %p, gen: %u, size: %u, page_num: %u, active: %p.\n",
- __func__, t, t->gen, t->iovec.iov_len, t->page_num, psb->active_state);
-#endif
- mutex_lock(&psb->state_lock);
- list_for_each_entry(c, &psb->state_list, config_entry) {
- st = &c->state;
-
- if (t->flags & NETFS_TRANS_SINGLE_DST) {
- if (!(st->ctl.perm & POHMELFS_IO_PERM_READ))
- continue;
- } else {
- if (!(st->ctl.perm & POHMELFS_IO_PERM_WRITE))
- continue;
- }
-
- if (psb->active_state && (psb->active_state->state.ctl.prio >= st->ctl.prio) &&
- (t->flags & NETFS_TRANS_SINGLE_DST))
- st = &psb->active_state->state;
-
- err = netfs_trans_push(t, st);
- if (!err && (t->flags & NETFS_TRANS_SINGLE_DST))
- break;
- }
-
- mutex_unlock(&psb->state_lock);
-#if 0
- dprintk("%s: fully sent t: %p, gen: %u, size: %u, page_num: %u, err: %d.\n",
- __func__, t, t->gen, t->iovec.iov_len, t->page_num, err);
-#endif
- if (err)
- t->result = err;
- return err;
-}
-
-int netfs_trans_finish(struct netfs_trans *t, struct pohmelfs_sb *psb)
-{
- int err;
- struct netfs_cmd *cmd = t->iovec.iov_base;
-
- t->gen = atomic_inc_return(&psb->trans_gen);
-
- cmd->size = t->iovec.iov_len - sizeof(struct netfs_cmd) +
- t->attached_size + t->attached_pages * sizeof(struct netfs_cmd);
- cmd->cmd = NETFS_TRANS;
- cmd->start = t->gen;
- cmd->id = 0;
-
- if (psb->perform_crypto) {
- cmd->ext = psb->crypto_attached_size;
- cmd->csize = psb->crypto_attached_size;
- }
-
- dprintk("%s: t: %u, size: %u, iov_len: %zu, attached_size: %u, attached_pages: %u.\n",
- __func__, t->gen, cmd->size, t->iovec.iov_len, t->attached_size, t->attached_pages);
- err = pohmelfs_trans_crypt(t, psb);
- if (err) {
- t->result = err;
- netfs_convert_cmd(cmd);
- dprintk("%s: trans: %llu, crypto_attached_size: %u, attached_size: %u, attached_pages: %d, trans_size: %u, err: %d.\n",
- __func__, cmd->start, psb->crypto_attached_size, t->attached_size, t->attached_pages, cmd->size, err);
- }
- netfs_trans_put(t);
- return err;
-}
-
-/*
- * Resend transaction to remote server(s).
- * If new servers were added into superblock, we can try to send data
- * to them too.
- *
- * It is called under superblock's state_lock, so we can safely
- * dereference psb->state_list. Also, transaction's reference counter is
- * bumped, so it can not go away under us, thus we can safely access all
- * its members. State is locked.
- *
- * This function returns 0 if transaction was successfully sent to at
- * least one destination target.
- */
-int netfs_trans_resend(struct netfs_trans *t, struct pohmelfs_sb *psb)
-{
- struct netfs_trans_dst *dst;
- struct netfs_state *st;
- struct pohmelfs_config *c;
- int err, exist, error = -ENODEV;
-
- list_for_each_entry(c, &psb->state_list, config_entry) {
- st = &c->state;
-
- exist = 0;
- spin_lock(&t->dst_lock);
- list_for_each_entry(dst, &t->dst_list, trans_entry) {
- if (st == dst->state) {
- exist = 1;
- break;
- }
- }
- spin_unlock(&t->dst_lock);
-
- if (exist) {
- if (!(t->flags & NETFS_TRANS_SINGLE_DST) ||
- (c->config_entry.next == &psb->state_list)) {
- dprintk("%s: resending st: %p, t: %p, gen: %u.\n",
- __func__, st, t, t->gen);
- err = netfs_trans_send(t, st);
- if (!err)
- error = 0;
- }
- continue;
- }
-
- dprintk("%s: pushing/resending st: %p, t: %p, gen: %u.\n",
- __func__, st, t, t->gen);
- err = netfs_trans_push(t, st);
- if (err)
- continue;
- error = 0;
- if (t->flags & NETFS_TRANS_SINGLE_DST)
- break;
- }
-
- t->result = error;
- return error;
-}
-
-void *netfs_trans_add(struct netfs_trans *t, unsigned int size)
-{
- struct iovec *io = &t->iovec;
- void *ptr;
-
- if (size > t->total_size) {
- ptr = ERR_PTR(-EINVAL);
- goto out;
- }
-
- if (io->iov_len + size > t->total_size) {
- dprintk("%s: too big size t: %p, gen: %u, iov_len: %zu, size: %u, total: %u.\n",
- __func__, t, t->gen, io->iov_len, size, t->total_size);
- ptr = ERR_PTR(-E2BIG);
- goto out;
- }
-
- ptr = io->iov_base + io->iov_len;
- io->iov_len += size;
-
-out:
- dprintk("%s: t: %p, gen: %u, size: %u, total: %zu.\n",
- __func__, t, t->gen, size, io->iov_len);
- return ptr;
-}
-
-void netfs_trans_free(struct netfs_trans *t)
-{
- if (t->eng)
- pohmelfs_crypto_thread_make_ready(t->eng->thread);
- kfree(t);
-}
-
-struct netfs_trans *netfs_trans_alloc(struct pohmelfs_sb *psb, unsigned int size,
- unsigned int flags, unsigned int nr)
-{
- struct netfs_trans *t;
- unsigned int num, cont, pad, size_no_trans;
- unsigned int crypto_added = 0;
- struct netfs_cmd *cmd;
-
- if (psb->perform_crypto)
- crypto_added = psb->crypto_attached_size;
-
- /*
- * |sizeof(struct netfs_trans)|
- * |sizeof(struct netfs_cmd)| - transaction header
- * |size| - buffer with requested size
- * |padding| - crypto padding, zero bytes
- * |nr * sizeof(struct page *)| - array of page pointers
- *
- * Overall size should be less than PAGE_SIZE for guaranteed allocation.
- */
-
- cont = size;
- size = ALIGN(size, psb->crypto_align_size);
- pad = size - cont;
-
- size_no_trans = size + sizeof(struct netfs_cmd) * 2 + crypto_added;
-
- cont = sizeof(struct netfs_trans) + size_no_trans;
-
- num = (PAGE_SIZE - cont)/sizeof(struct page *);
-
- if (nr > num)
- nr = num;
-
- t = kzalloc(cont + nr*sizeof(struct page *), GFP_NOIO);
- if (!t)
- goto err_out_exit;
-
- t->iovec.iov_base = (void *)(t + 1);
- t->pages = (struct page **)(t->iovec.iov_base + size_no_trans);
-
- /*
- * Reserving space for transaction header.
- */
- t->iovec.iov_len = sizeof(struct netfs_cmd) + crypto_added;
-
- netfs_trans_init_static(t, nr, size_no_trans);
-
- t->flags = flags;
- t->psb = psb;
-
- cmd = (struct netfs_cmd *)t->iovec.iov_base;
-
- cmd->size = size;
- cmd->cpad = pad;
- cmd->csize = crypto_added;
-
- dprintk("%s: t: %p, gen: %u, size: %u, padding: %u, align_size: %u, flags: %x, "
- "page_num: %u, base: %p, pages: %p.\n",
- __func__, t, t->gen, size, pad, psb->crypto_align_size, flags, nr,
- t->iovec.iov_base, t->pages);
-
- return t;
-
-err_out_exit:
- return NULL;
-}
-
-int netfs_trans_init(void)
-{
- int err = -ENOMEM;
-
- netfs_trans_dst = kmem_cache_create("netfs_trans_dst", sizeof(struct netfs_trans_dst),
- 0, 0, NULL);
- if (!netfs_trans_dst)
- goto err_out_exit;
-
- netfs_trans_dst_pool = mempool_create_slab_pool(256, netfs_trans_dst);
- if (!netfs_trans_dst_pool)
- goto err_out_free;
-
- return 0;
-
-err_out_free:
- kmem_cache_destroy(netfs_trans_dst);
-err_out_exit:
- return err;
-}
-
-void netfs_trans_exit(void)
-{
- mempool_destroy(netfs_trans_dst_pool);
- kmem_cache_destroy(netfs_trans_dst);
-}
#include "wlan_bssdef.h"
#include "rtl8712_spec.h"
#include "rtl8712_hal.h"
+#include <linux/mutex.h>
+#include <linux/completion.h>
enum _NIC_VERSION {
RTL8711_NIC,
s32 bSurpriseRemoved;
u32 IsrContent;
u32 ImrContent;
+ bool fw_found;
u8 EepromAddressSize;
u8 hw_init_completed;
struct task_struct *cmdThread;
_workitem wkFilterRxFF0;
u8 blnEnableRxFF0Filter;
spinlock_t lockRxFF0Filter;
+ const struct firmware *fw;
+ struct usb_interface *pusb_intf;
+ struct mutex mutex_start;
+ struct completion rtl8712_fw_ready;
};
static inline u8 *myid(struct eeprom_priv *peepriv)
#define FWBUFF_ALIGN_SZ 512
#define MAX_DUMP_FWSZ 49152 /*default = 49152 (48k)*/
-static u32 rtl871x_open_fw(struct _adapter *padapter, void **pphfwfile_hdl,
- const u8 **ppmappedfw)
+static void rtl871x_load_fw_cb(const struct firmware *firmware, void *context)
{
+ struct _adapter *padapter = context;
+
+ complete(&padapter->rtl8712_fw_ready);
+ if (!firmware) {
+ struct usb_device *udev = padapter->dvobjpriv.pusbdev;
+ struct usb_interface *pusb_intf = padapter->pusb_intf;
+ printk(KERN_ERR "r8712u: Firmware request failed\n");
+ padapter->fw_found = false;
+ usb_put_dev(udev);
+ usb_set_intfdata(pusb_intf, NULL);
+ return;
+ }
+ padapter->fw = firmware;
+ padapter->fw_found = true;
+ /* firmware available - start netdev */
+ register_netdev(padapter->pnetdev);
+}
+
+static const char firmware_file[] = "rtlwifi/rtl8712u.bin";
+
+int rtl871x_load_fw(struct _adapter *padapter)
+{
+ struct device *dev = &padapter->dvobjpriv.pusbdev->dev;
int rc;
- const char firmware_file[] = "rtlwifi/rtl8712u.bin";
- const struct firmware **praw = (const struct firmware **)
- (pphfwfile_hdl);
- struct dvobj_priv *pdvobjpriv = (struct dvobj_priv *)
- (&padapter->dvobjpriv);
- struct usb_device *pusbdev = pdvobjpriv->pusbdev;
+ init_completion(&padapter->rtl8712_fw_ready);
printk(KERN_INFO "r8712u: Loading firmware from \"%s\"\n",
firmware_file);
- rc = request_firmware(praw, firmware_file, &pusbdev->dev);
- if (rc < 0) {
- printk(KERN_ERR "r8712u: Unable to load firmware\n");
- printk(KERN_ERR "r8712u: Install latest linux-firmware\n");
+ rc = request_firmware_nowait(THIS_MODULE, 1, firmware_file, dev,
+ GFP_KERNEL, padapter, rtl871x_load_fw_cb);
+ if (rc)
+ printk(KERN_ERR "r8712u: Firmware request error %d\n", rc);
+ return rc;
+}
+MODULE_FIRMWARE("rtlwifi/rtl8712u.bin");
+
+static u32 rtl871x_open_fw(struct _adapter *padapter, const u8 **ppmappedfw)
+{
+ const struct firmware **praw = &padapter->fw;
+
+ if (padapter->fw->size > 200000) {
+ printk(KERN_ERR "r8172u: Badfw->size of %d\n",
+ (int)padapter->fw->size);
return 0;
}
*ppmappedfw = (u8 *)((*praw)->data);
return (*praw)->size;
}
-MODULE_FIRMWARE("rtlwifi/rtl8712u.bin");
static void fill_fwpriv(struct _adapter *padapter, struct fw_priv *pfwpriv)
{
uint dump_imem_sz, imem_sz, dump_emem_sz, emem_sz; /* max = 49152; */
struct fw_hdr fwhdr;
u32 ulfilelength; /* FW file size */
- void *phfwfile_hdl = NULL;
const u8 *pmappedfw = NULL;
u8 *ptmpchar = NULL, *ppayload, *ptr;
struct tx_desc *ptx_desc;
u32 txdscp_sz = sizeof(struct tx_desc);
u8 ret = _FAIL;
- ulfilelength = rtl871x_open_fw(padapter, &phfwfile_hdl, &pmappedfw);
+ ulfilelength = rtl871x_open_fw(padapter, &pmappedfw);
if (pmappedfw && (ulfilelength > 0)) {
update_fwhdr(&fwhdr, pmappedfw);
if (chk_fwhdr(&fwhdr, ulfilelength) == _FAIL)
- goto firmware_rel;
+ return ret;
fill_fwpriv(padapter, &fwhdr.fwpriv);
/* firmware check ok */
maxlen = (fwhdr.img_IMEM_size > fwhdr.img_SRAM_size) ?
maxlen += txdscp_sz;
ptmpchar = _malloc(maxlen + FWBUFF_ALIGN_SZ);
if (ptmpchar == NULL)
- goto firmware_rel;
+ return ret;
ptx_desc = (struct tx_desc *)(ptmpchar + FWBUFF_ALIGN_SZ -
((addr_t)(ptmpchar) & (FWBUFF_ALIGN_SZ - 1)));
exit_fail:
kfree(ptmpchar);
-firmware_rel:
- release_firmware((struct firmware *)phfwfile_hdl);
return ret;
}
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kthread.h>
+#include <linux/firmware.h>
#include "osdep_service.h"
#include "drv_types.h"
#include "xmit_osdep.h"
void r8712_stop_drv_timers(struct _adapter *padapter)
{
_cancel_timer_ex(&padapter->mlmepriv.assoc_timer);
- _cancel_timer_ex(&padapter->mlmepriv.sitesurveyctrl.
- sitesurvey_ctrl_timer);
_cancel_timer_ex(&padapter->securitypriv.tkip_timer);
_cancel_timer_ex(&padapter->mlmepriv.scan_to_timer);
_cancel_timer_ex(&padapter->mlmepriv.dhcp_timer);
_cancel_timer_ex(&padapter->mlmepriv.wdg_timer);
+ _cancel_timer_ex(&padapter->mlmepriv.sitesurveyctrl.
+ sitesurvey_ctrl_timer);
}
static u8 init_default_value(struct _adapter *padapter)
r8712_free_mlme_priv(&padapter->mlmepriv);
r8712_free_io_queue(padapter);
_free_xmit_priv(&padapter->xmitpriv);
- _r8712_free_sta_priv(&padapter->stapriv);
+ if (padapter->fw_found)
+ _r8712_free_sta_priv(&padapter->stapriv);
_r8712_free_recv_priv(&padapter->recvpriv);
mp871xdeinit(padapter);
if (pnetdev)
{
struct _adapter *padapter = (struct _adapter *)netdev_priv(pnetdev);
+ mutex_lock(&padapter->mutex_start);
if (padapter->bup == false) {
padapter->bDriverStopped = false;
padapter->bSurpriseRemoved = false;
/* start driver mlme relation timer */
start_drv_timers(padapter);
padapter->ledpriv.LedControlHandler(padapter, LED_CTL_NO_LINK);
+ mutex_unlock(&padapter->mutex_start);
return 0;
netdev_open_error:
padapter->bup = false;
netif_carrier_off(pnetdev);
netif_stop_queue(pnetdev);
+ mutex_unlock(&padapter->mutex_start);
return -1;
}
r8712_free_network_queue(padapter);
/* The interface is no longer Up: */
padapter->bup = false;
+ release_firmware(padapter->fw);
+ /* never exit with a firmware callback pending */
+ wait_for_completion(&padapter->rtl8712_fw_ready);
return 0;
}
};
uint rtl8712_hal_init(struct _adapter *padapter);
+int rtl871x_load_fw(struct _adapter *padapter);
#endif
_r8712_init_sta_xmit_priv(&psta->sta_xmitpriv);
_r8712_init_sta_recv_priv(&psta->sta_recvpriv);
#ifdef CONFIG_R8712_AP
+ _init_listhead(&psta->asoc_list);
_init_listhead(&psta->auth_list);
#endif
}
{USB_DEVICE(0x0DF6, 0x0045)},
{USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */
{USB_DEVICE(0x0DF6, 0x004B)},
+ {USB_DEVICE(0x0DF6, 0x005B)},
{USB_DEVICE(0x0DF6, 0x005D)},
{USB_DEVICE(0x0DF6, 0x0063)},
/* Sweex */
pdvobjpriv = &padapter->dvobjpriv;
pdvobjpriv->padapter = padapter;
padapter->dvobjpriv.pusbdev = udev;
+ padapter->pusb_intf = pusb_intf;
usb_set_intfdata(pusb_intf, pnetdev);
SET_NETDEV_DEV(pnetdev, &pusb_intf->dev);
/* step 2. */
"%pM\n", mac);
memcpy(pnetdev->dev_addr, mac, ETH_ALEN);
}
- /* step 6. Tell the network stack we exist */
- if (register_netdev(pnetdev) != 0)
+ /* step 6. Load the firmware asynchronously */
+ if (rtl871x_load_fw(padapter))
goto error;
spin_lock_init(&padapter->lockRxFF0Filter);
+ mutex_init(&padapter->mutex_start);
return 0;
error:
usb_put_dev(udev);
flush_scheduled_work();
udelay(1);
/*Stop driver mlme relation timer */
- r8712_stop_drv_timers(padapter);
+ if (padapter->fw_found)
+ r8712_stop_drv_timers(padapter);
r871x_dev_unload(padapter);
r8712_free_drv_sw(padapter);
}
/* Free the driver's device context: */
kfree(drv_datap->base_img);
- kfree(drv_datap);
- dev_set_drvdata(bridge, NULL);
kfree((void *)dev_ctxt);
return status;
}
DBC_ASSERT(ret == true);
}
+ kfree(drv_datap);
+ dev_set_drvdata(bridge, NULL);
+
func_cont:
mem_ext_phys_pool_release();
}
#endif
pr_ctxt = kzalloc(sizeof(struct process_context), GFP_KERNEL);
- if (pr_ctxt) {
- pr_ctxt->res_state = PROC_RES_ALLOCATED;
- spin_lock_init(&pr_ctxt->dmm_map_lock);
- INIT_LIST_HEAD(&pr_ctxt->dmm_map_list);
- spin_lock_init(&pr_ctxt->dmm_rsv_lock);
- INIT_LIST_HEAD(&pr_ctxt->dmm_rsv_list);
-
- pr_ctxt->node_id = kzalloc(sizeof(struct idr), GFP_KERNEL);
- if (pr_ctxt->node_id) {
- idr_init(pr_ctxt->node_id);
- } else {
- status = -ENOMEM;
- goto err;
- }
+ if (!pr_ctxt)
+ return -ENOMEM;
+
+ pr_ctxt->res_state = PROC_RES_ALLOCATED;
+ spin_lock_init(&pr_ctxt->dmm_map_lock);
+ INIT_LIST_HEAD(&pr_ctxt->dmm_map_list);
+ spin_lock_init(&pr_ctxt->dmm_rsv_lock);
+ INIT_LIST_HEAD(&pr_ctxt->dmm_rsv_list);
- pr_ctxt->stream_id = kzalloc(sizeof(struct idr), GFP_KERNEL);
- if (pr_ctxt->stream_id)
- idr_init(pr_ctxt->stream_id);
- else
- status = -ENOMEM;
- } else {
+ pr_ctxt->node_id = kzalloc(sizeof(struct idr), GFP_KERNEL);
+ if (!pr_ctxt->node_id) {
status = -ENOMEM;
+ goto err1;
}
-err:
+
+ idr_init(pr_ctxt->node_id);
+
+ pr_ctxt->stream_id = kzalloc(sizeof(struct idr), GFP_KERNEL);
+ if (!pr_ctxt->stream_id) {
+ status = -ENOMEM;
+ goto err2;
+ }
+
+ idr_init(pr_ctxt->stream_id);
+
filp->private_data = pr_ctxt;
+
#ifdef CONFIG_TIDSPBRIDGE_RECOVERY
- if (!status)
- atomic_inc(&bridge_cref);
+ atomic_inc(&bridge_cref);
#endif
+ return 0;
+
+err2:
+ kfree(pr_ctxt->node_id);
+err1:
+ kfree(pr_ctxt);
return status;
}
flush_signals(current);
drv_remove_all_resources(pr_ctxt);
proc_detach(pr_ctxt);
+ kfree(pr_ctxt->node_id);
+ kfree(pr_ctxt->stream_id);
kfree(pr_ctxt);
filp->private_data = NULL;
{
int ret;
- stub_priv_cache = KMEM_CACHE(stub_priv, SLAB_HWCACHE_ALIGN);
+ init_busid_table();
+ stub_priv_cache = KMEM_CACHE(stub_priv, SLAB_HWCACHE_ALIGN);
if (!stub_priv_cache) {
pr_err("kmem_cache_create failed\n");
return -ENOMEM;
goto err_create_file;
}
- init_busid_table();
pr_info(DRIVER_DESC " v" USBIP_VERSION "\n");
return ret;
if (unlikely(zbpg == NULL))
goto out;
/* ok, have a page, now compress the data before taking locks */
- spin_lock(&zbpg->lock);
spin_lock(&zbud_budlists_spinlock);
+ spin_lock(&zbpg->lock);
list_add_tail(&zbpg->bud_list, &zbud_unbuddied[nchunks].list);
zbud_unbuddied[nchunks].count++;
zh = &zbpg->buddy[0];
zh->oid = *oid;
zh->pool_id = pool_id;
zh->client_id = client_id;
- /* can wait to copy the data until the list locks are dropped */
- spin_unlock(&zbud_budlists_spinlock);
-
to = zbud_data(zh, size);
memcpy(to, cdata, size);
spin_unlock(&zbpg->lock);
+ spin_unlock(&zbud_budlists_spinlock);
+
zbud_cumul_chunk_counts[nchunks]++;
atomic_inc(&zcache_zbud_curr_zpages);
zcache_zbud_cumul_zpages++;
*/
static unsigned int zv_max_mean_zsize = (PAGE_SIZE / 8) * 5;
-static unsigned long zv_curr_dist_counts[NCHUNKS];
-static unsigned long zv_cumul_dist_counts[NCHUNKS];
+static atomic_t zv_curr_dist_counts[NCHUNKS];
+static atomic_t zv_cumul_dist_counts[NCHUNKS];
static struct zv_hdr *zv_create(struct xv_pool *xvpool, uint32_t pool_id,
struct tmem_oid *oid, uint32_t index,
&page, &offset, ZCACHE_GFP_MASK);
if (unlikely(ret))
goto out;
- zv_curr_dist_counts[chunks]++;
- zv_cumul_dist_counts[chunks]++;
+ atomic_inc(&zv_curr_dist_counts[chunks]);
+ atomic_inc(&zv_cumul_dist_counts[chunks]);
zv = kmap_atomic(page, KM_USER0) + offset;
zv->index = index;
zv->oid = *oid;
ASSERT_SENTINEL(zv, ZVH);
BUG_ON(chunks >= NCHUNKS);
- zv_curr_dist_counts[chunks]--;
+ atomic_dec(&zv_curr_dist_counts[chunks]);
size -= sizeof(*zv);
BUG_ON(size == 0);
INVERT_SENTINEL(zv, ZVH);
char *p = buf;
for (i = 0; i < NCHUNKS; i++) {
- n = zv_curr_dist_counts[i];
+ n = atomic_read(&zv_curr_dist_counts[i]);
p += sprintf(p, "%lu ", n);
chunks += n;
sum_total_chunks += i * n;
char *p = buf;
for (i = 0; i < NCHUNKS; i++) {
- n = zv_cumul_dist_counts[i];
+ n = atomic_read(&zv_cumul_dist_counts[i]);
p += sprintf(p, "%lu ", n);
chunks += n;
sum_total_chunks += i * n;
* Swizzling increases objects per swaptype, increasing tmem concurrency
* for heavy swaploads. Later, larger nr_cpus -> larger SWIZ_BITS
* Setting SWIZ_BITS to 27 basically reconstructs the swap entry from
- * frontswap_get_page()
+ * frontswap_get_page(), but has side-effects. Hence using 8.
*/
-#define SWIZ_BITS 27
+#define SWIZ_BITS 8
#define SWIZ_MASK ((1 << SWIZ_BITS) - 1)
#define _oswiz(_type, _ind) ((_type << SWIZ_BITS) | (_ind & SWIZ_MASK))
#define iswiz(_ind) (_ind >> SWIZ_BITS)
if (ret < 0)
return iscsit_add_reject_from_cmd(
ISCSI_REASON_BOOKMARK_NO_RESOURCES,
- 1, 1, buf, cmd);
+ 1, 0, buf, cmd);
/*
* Check the CmdSN against ExpCmdSN/MaxCmdSN here if
* the Immediate Bit is not set, and no Immediate
return 0;
}
+static bool iscsit_check_inaddr_any(struct iscsi_np *np)
+{
+ bool ret = false;
+
+ if (np->np_sockaddr.ss_family == AF_INET6) {
+ const struct sockaddr_in6 sin6 = {
+ .sin6_addr = IN6ADDR_ANY_INIT };
+ struct sockaddr_in6 *sock_in6 =
+ (struct sockaddr_in6 *)&np->np_sockaddr;
+
+ if (!memcmp(sock_in6->sin6_addr.s6_addr,
+ sin6.sin6_addr.s6_addr, 16))
+ ret = true;
+ } else {
+ struct sockaddr_in * sock_in =
+ (struct sockaddr_in *)&np->np_sockaddr;
+
+ if (sock_in->sin_addr.s_addr == INADDR_ANY)
+ ret = true;
+ }
+
+ return ret;
+}
+
static int iscsit_build_sendtargets_response(struct iscsi_cmd *cmd)
{
char *payload = NULL;
spin_lock(&tpg->tpg_np_lock);
list_for_each_entry(tpg_np, &tpg->tpg_gnp_list,
tpg_np_list) {
+ struct iscsi_np *np = tpg_np->tpg_np;
+ bool inaddr_any = iscsit_check_inaddr_any(np);
+
len = sprintf(buf, "TargetAddress="
"%s%s%s:%hu,%hu",
- (tpg_np->tpg_np->np_sockaddr.ss_family == AF_INET6) ?
- "[" : "", tpg_np->tpg_np->np_ip,
- (tpg_np->tpg_np->np_sockaddr.ss_family == AF_INET6) ?
- "]" : "", tpg_np->tpg_np->np_port,
+ (np->np_sockaddr.ss_family == AF_INET6) ?
+ "[" : "", (inaddr_any == false) ?
+ np->np_ip : conn->local_ip,
+ (np->np_sockaddr.ss_family == AF_INET6) ?
+ "]" : "", (inaddr_any == false) ?
+ np->np_port : conn->local_port,
tpg->tpgt);
len += 1;
#include <linux/configfs.h>
#include <linux/export.h>
+#include <linux/inet.h>
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>
#include <target/target_core_fabric_configfs.h>
u16 cid;
/* Remote TCP Port */
u16 login_port;
+ u16 local_port;
int net_size;
u32 auth_id;
#define CONNFLAG_SCTP_STRUCT_FILE 0x01
unsigned char bad_hdr[ISCSI_HDR_LEN];
#define IPV6_ADDRESS_SPACE 48
unsigned char login_ip[IPV6_ADDRESS_SPACE];
+ unsigned char local_ip[IPV6_ADDRESS_SPACE];
int conn_usage_count;
int conn_waiting_on_uc;
atomic_t check_immediate_queue;
struct hash_desc conn_tx_hash;
/* Used for scheduling TX and RX connection kthreads */
cpumask_var_t conn_cpumask;
- int conn_rx_reset_cpumask:1;
- int conn_tx_reset_cpumask:1;
+ unsigned int conn_rx_reset_cpumask:1;
+ unsigned int conn_tx_reset_cpumask:1;
/* list_head of struct iscsi_cmd for this connection */
struct list_head conn_cmd_list;
struct list_head immed_queue_list;
{
struct iscsi_conn *conn = cmd->conn;
struct iscsi_session *sess = conn->sess;
- struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess);
+ struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess);
spin_lock_bh(&cmd->dataout_timeout_lock);
if (!(cmd->dataout_timer_flags & ISCSI_TF_RUNNING)) {
struct iscsi_conn *conn)
{
struct iscsi_session *sess = conn->sess;
- struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess);
+ struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess);
if (cmd->dataout_timer_flags & ISCSI_TF_RUNNING)
return;
}
pr_debug("iSCSI Login successful on CID: %hu from %s to"
- " %s:%hu,%hu\n", conn->cid, conn->login_ip, np->np_ip,
- np->np_port, tpg->tpgt);
+ " %s:%hu,%hu\n", conn->cid, conn->login_ip,
+ conn->local_ip, conn->local_port, tpg->tpgt);
list_add_tail(&conn->conn_list, &sess->sess_conn_list);
atomic_inc(&sess->nconn);
sess->session_state = TARG_SESS_STATE_LOGGED_IN;
pr_debug("iSCSI Login successful on CID: %hu from %s to %s:%hu,%hu\n",
- conn->cid, conn->login_ip, np->np_ip, np->np_port, tpg->tpgt);
+ conn->cid, conn->login_ip, conn->local_ip, conn->local_port,
+ tpg->tpgt);
spin_lock_bh(&sess->conn_lock);
list_add_tail(&conn->conn_list, &sess->sess_conn_list);
goto fail;
}
+ ret = kernel_setsockopt(sock, IPPROTO_IP, IP_FREEBIND,
+ (char *)&opt, sizeof(opt));
+ if (ret < 0) {
+ pr_err("kernel_setsockopt() for IP_FREEBIND"
+ " failed\n");
+ goto fail;
+ }
+
ret = kernel_bind(sock, (struct sockaddr *)&np->np_sockaddr, len);
if (ret < 0) {
pr_err("kernel_bind() failed: %d\n", ret);
snprintf(conn->login_ip, sizeof(conn->login_ip), "%pI6c",
&sock_in6.sin6_addr.in6_u);
conn->login_port = ntohs(sock_in6.sin6_port);
+
+ if (conn->sock->ops->getname(conn->sock,
+ (struct sockaddr *)&sock_in6, &err, 0) < 0) {
+ pr_err("sock_ops->getname() failed.\n");
+ iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
+ ISCSI_LOGIN_STATUS_TARGET_ERROR);
+ goto new_sess_out;
+ }
+ snprintf(conn->local_ip, sizeof(conn->local_ip), "%pI6c",
+ &sock_in6.sin6_addr.in6_u);
+ conn->local_port = ntohs(sock_in6.sin6_port);
+
} else {
memset(&sock_in, 0, sizeof(struct sockaddr_in));
}
sprintf(conn->login_ip, "%pI4", &sock_in.sin_addr.s_addr);
conn->login_port = ntohs(sock_in.sin_port);
+
+ if (conn->sock->ops->getname(conn->sock,
+ (struct sockaddr *)&sock_in, &err, 0) < 0) {
+ pr_err("sock_ops->getname() failed.\n");
+ iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
+ ISCSI_LOGIN_STATUS_TARGET_ERROR);
+ goto new_sess_out;
+ }
+ sprintf(conn->local_ip, "%pI4", &sock_in.sin_addr.s_addr);
+ conn->local_port = ntohs(sock_in.sin_port);
}
conn->network_transport = np->np_network_transport;
pr_debug("Received iSCSI login request from %s on %s Network"
" Portal %s:%hu\n", conn->login_ip,
(conn->network_transport == ISCSI_TCP) ? "TCP" : "SCTP",
- np->np_ip, np->np_port);
+ conn->local_ip, conn->local_port);
pr_debug("Moving to TARG_CONN_STATE_IN_LOGIN.\n");
conn->conn_state = TARG_CONN_STATE_IN_LOGIN;
case ISCSI_OP_SCSI_TMFUNC:
transport_generic_free_cmd(&cmd->se_cmd, 1);
break;
+ case ISCSI_OP_REJECT:
+ /*
+ * Handle special case for REJECT when iscsi_add_reject*() has
+ * overwritten the original iscsi_opcode assignment, and the
+ * associated cmd->se_cmd needs to be released.
+ */
+ if (cmd->se_cmd.se_tfo != NULL) {
+ transport_generic_free_cmd(&cmd->se_cmd, 1);
+ break;
+ }
+ /* Fall-through */
default:
iscsit_release_cmd(cmd);
break;
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
spin_lock(&su_dev->t10_alua.tg_pt_gps_lock);
list_for_each_entry(tg_pt_gp, &su_dev->t10_alua.tg_pt_gps_list,
buf[2] = ((rd_len >> 8) & 0xff);
buf[3] = (rd_len & 0xff);
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
/*
* Determine if explict ALUA via SET_TARGET_PORT_GROUPS is allowed
}
out:
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
return 0;
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
if (dev == tpg->tpg_virt_lun0.lun_se_dev) {
buf[0] = 0x3f; /* Not connected */
buf[4] = 31; /* Set additional length to 31 */
out:
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
return 0;
}
int p, ret;
if (!(cdb[1] & 0x1)) {
+ if (cdb[2]) {
+ pr_err("INQUIRY with EVPD==0 but PAGE CODE=%02x\n",
+ cdb[2]);
+ cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
+ return -EINVAL;
+ }
+
ret = target_emulate_inquiry_std(cmd);
goto out;
}
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = dev->transport->get_device_type(dev);
}
pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]);
- cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE;
+ cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
ret = -EINVAL;
out_unmap:
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
out:
if (!ret) {
task->task_scsi_status = GOOD;
else
blocks = (u32)blocks_long;
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = (blocks >> 24) & 0xff;
buf[1] = (blocks >> 16) & 0xff;
if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws)
put_unaligned_be32(0xFFFFFFFF, &buf[0]);
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
unsigned char *buf;
unsigned long long blocks = dev->transport->get_blocks(dev);
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = (blocks >> 56) & 0xff;
buf[1] = (blocks >> 48) & 0xff;
if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws)
buf[14] = 0x80;
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
offset = cmd->data_length;
}
- rbuf = transport_kmap_first_data_page(cmd);
+ rbuf = transport_kmap_data_sg(cmd);
memcpy(rbuf, buf, offset);
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
return -ENOSYS;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) {
/*
*/
buf[0] = 0x70;
buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION;
- /*
- * Make sure request data length is enough for additional
- * sense data.
- */
- if (cmd->data_length <= 18) {
+
+ if (cmd->data_length < 18) {
buf[7] = 0x00;
err = -EINVAL;
goto end;
*/
buf[0] = 0x70;
buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE;
- /*
- * Make sure request data length is enough for additional
- * sense data.
- */
- if (cmd->data_length <= 18) {
+
+ if (cmd->data_length < 18) {
buf[7] = 0x00;
err = -EINVAL;
goto end;
}
end:
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
return 0;
dl = get_unaligned_be16(&cdb[0]);
bd_dl = get_unaligned_be16(&cdb[2]);
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
ptr = &buf[offset];
pr_debug("UNMAP: Sub: %s Using dl: %hu bd_dl: %hu size: %hu"
}
err:
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
if (!ret) {
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
return -EINVAL;
}
- se_dev->su_dev_flags |= SDF_USING_ALIAS;
read_bytes = snprintf(&se_dev->se_dev_alias[0], SE_DEV_ALIAS_LEN,
"%s", page);
-
+ if (!read_bytes)
+ return -EINVAL;
if (se_dev->se_dev_alias[read_bytes - 1] == '\n')
se_dev->se_dev_alias[read_bytes - 1] = '\0';
+ se_dev->su_dev_flags |= SDF_USING_ALIAS;
+
pr_debug("Target_Core_ConfigFS: %s/%s set alias: %s\n",
config_item_name(&hba->hba_group.cg_item),
config_item_name(&se_dev->se_dev_group.cg_item),
return -EINVAL;
}
- se_dev->su_dev_flags |= SDF_USING_UDEV_PATH;
read_bytes = snprintf(&se_dev->se_dev_udev_path[0], SE_UDEV_PATH_LEN,
"%s", page);
-
+ if (!read_bytes)
+ return -EINVAL;
if (se_dev->se_dev_udev_path[read_bytes - 1] == '\n')
se_dev->se_dev_udev_path[read_bytes - 1] = '\0';
+ se_dev->su_dev_flags |= SDF_USING_UDEV_PATH;
+
pr_debug("Target_Core_ConfigFS: %s/%s set udev_path: %s\n",
config_item_name(&hba->hba_group.cg_item),
config_item_name(&se_dev->se_dev_group.cg_item),
void core_dec_lacl_count(struct se_node_acl *se_nacl, struct se_cmd *se_cmd)
{
struct se_dev_entry *deve;
+ unsigned long flags;
- spin_lock_irq(&se_nacl->device_list_lock);
+ spin_lock_irqsave(&se_nacl->device_list_lock, flags);
deve = &se_nacl->device_list[se_cmd->orig_fe_lun];
deve->deve_cmds--;
- spin_unlock_irq(&se_nacl->device_list_lock);
+ spin_unlock_irqrestore(&se_nacl->device_list_lock, flags);
}
void core_update_device_list_access(
unsigned char *buf;
u32 cdb_offset = 0, lun_count = 0, offset = 8, i;
- buf = transport_kmap_first_data_page(se_cmd);
+ buf = (unsigned char *) transport_kmap_data_sg(se_cmd);
/*
* If no struct se_session pointer is present, this struct se_cmd is
* See SPC3 r07, page 159.
*/
done:
- transport_kunmap_first_data_page(se_cmd);
+ transport_kunmap_data_sg(se_cmd);
lun_count *= 8;
buf[0] = ((lun_count >> 24) & 0xff);
buf[1] = ((lun_count >> 16) & 0xff);
{
struct se_lun *lun_p;
u32 lun_access = 0;
+ int rc;
if (atomic_read(&dev->dev_access_obj.obj_access_count) != 0) {
pr_err("Unable to export struct se_device while dev_access_obj: %d\n",
atomic_read(&dev->dev_access_obj.obj_access_count));
- return NULL;
+ return ERR_PTR(-EACCES);
}
lun_p = core_tpg_pre_addlun(tpg, lun);
- if ((IS_ERR(lun_p)) || !lun_p)
- return NULL;
+ if (IS_ERR(lun_p))
+ return lun_p;
if (dev->dev_flags & DF_READ_ONLY)
lun_access = TRANSPORT_LUNFLAGS_READ_ONLY;
else
lun_access = TRANSPORT_LUNFLAGS_READ_WRITE;
- if (core_tpg_post_addlun(tpg, lun_p, lun_access, dev) < 0)
- return NULL;
+ rc = core_tpg_post_addlun(tpg, lun_p, lun_access, dev);
+ if (rc < 0)
+ return ERR_PTR(rc);
pr_debug("%s_TPG[%u]_LUN[%u] - Activated %s Logical Unit from"
" CORE HBA: %u\n", tpg->se_tpg_tfo->get_fabric_name(),
u32 unpacked_lun)
{
struct se_lun *lun;
- int ret = 0;
- lun = core_tpg_pre_dellun(tpg, unpacked_lun, &ret);
- if (!lun)
- return ret;
+ lun = core_tpg_pre_dellun(tpg, unpacked_lun);
+ if (IS_ERR(lun))
+ return PTR_ERR(lun);
core_tpg_post_dellun(tpg, lun);
lun_p = core_dev_add_lun(se_tpg, dev->se_hba, dev,
lun->unpacked_lun);
- if (IS_ERR(lun_p) || !lun_p) {
+ if (IS_ERR(lun_p)) {
pr_err("core_dev_add_lun() failed\n");
- ret = -EINVAL;
+ ret = PTR_ERR(lun_p);
goto out;
}
/*
* These settings need to be made tunable..
*/
- ib_dev->ibd_bio_set = bioset_create(32, 64);
+ ib_dev->ibd_bio_set = bioset_create(32, 0);
if (!ib_dev->ibd_bio_set) {
pr_err("IBLOCK: Unable to create bioset()\n");
return ERR_PTR(-ENOMEM);
*/
dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count = 1;
dev->se_sub_dev->se_dev_attrib.unmap_granularity =
- q->limits.discard_granularity;
+ q->limits.discard_granularity >> 9;
dev->se_sub_dev->se_dev_attrib.unmap_granularity_alignment =
q->limits.discard_alignment;
struct iblock_req *ib_req = IBLOCK_REQ(task);
struct bio *bio;
+ /*
+ * Only allocate as many vector entries as the bio code allows us to,
+ * we'll loop later on until we have handled the whole request.
+ */
+ if (sg_num > BIO_MAX_PAGES)
+ sg_num = BIO_MAX_PAGES;
+
bio = bio_alloc_bioset(GFP_NOIO, sg_num, ib_dev->ibd_bio_set);
if (!bio) {
pr_err("Unable to allocate memory for bio\n");
struct se_lun *core_tpg_pre_addlun(struct se_portal_group *, u32);
int core_tpg_post_addlun(struct se_portal_group *, struct se_lun *,
u32, void *);
-struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32, int *);
+struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32 unpacked_lun);
int core_tpg_post_dellun(struct se_portal_group *, struct se_lun *);
/* target_core_transport.c */
case READ_MEDIA_SERIAL_NUMBER:
case REPORT_LUNS:
case REQUEST_SENSE:
+ case PERSISTENT_RESERVE_IN:
ret = 0; /*/ Allowed CDBs */
break;
default:
tidh_new->dest_local_nexus = 1;
list_add_tail(&tidh_new->dest_list, &tid_dest_list);
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
/*
* For a PERSISTENT RESERVE OUT specify initiator ports payload,
* first extract TransportID Parameter Data Length, and make sure
}
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
/*
* Go ahead and create a registrations from tid_dest_list for the
return 0;
out:
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
/*
* For the failure case, release everything from tid_dest_list
* including *dest_pr_reg and the configfs dependances..
if (!calling_it_nexus)
core_scsi3_ua_allocate(pr_reg_nacl,
pr_res_mapped_lun, 0x2A,
- ASCQ_2AH_RESERVATIONS_PREEMPTED);
+ ASCQ_2AH_REGISTRATIONS_PREEMPTED);
}
spin_unlock(&pr_tmpl->registration_lock);
/*
* additional sense code set to REGISTRATIONS PREEMPTED;
*/
core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A,
- ASCQ_2AH_RESERVATIONS_PREEMPTED);
+ ASCQ_2AH_REGISTRATIONS_PREEMPTED);
}
spin_unlock(&pr_tmpl->registration_lock);
/*
* will be moved to for the TransportID containing SCSI initiator WWN
* information.
*/
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
rtpi = (buf[18] & 0xff) << 8;
rtpi |= buf[19] & 0xff;
tid_len = (buf[20] & 0xff) << 24;
tid_len |= (buf[21] & 0xff) << 16;
tid_len |= (buf[22] & 0xff) << 8;
tid_len |= buf[23] & 0xff;
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
buf = NULL;
if ((tid_len + 24) != cmd->data_length) {
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
proto_ident = (buf[24] & 0x0f);
#if 0
pr_debug("SPC-3 PR REGISTER_AND_MOVE: Extracted Protocol Identifier:"
goto out;
}
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
buf = NULL;
pr_debug("SPC-3 PR [%s] Extracted initiator %s identifier: %s"
" REGISTER_AND_MOVE\n");
}
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
core_scsi3_put_pr_reg(dest_pr_reg);
return 0;
out:
if (buf)
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
if (dest_se_deve)
core_scsi3_lunacl_undepend_item(dest_se_deve);
if (dest_node_acl)
scope = (cdb[2] & 0xf0);
type = (cdb[2] & 0x0f);
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
/*
* From PERSISTENT_RESERVE_OUT parameter list (payload)
*/
aptpl = (buf[17] & 0x01);
unreg = (buf[17] & 0x02);
}
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
buf = NULL;
/*
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff);
buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff);
buf[2] = ((su_dev->t10_pr.pr_generation >> 8) & 0xff);
buf[6] = ((add_len >> 8) & 0xff);
buf[7] = (add_len & 0xff);
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
return 0;
}
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff);
buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff);
buf[2] = ((su_dev->t10_pr.pr_generation >> 8) & 0xff);
err:
spin_unlock(&se_dev->dev_reservation_lock);
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
return 0;
}
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = ((add_len << 8) & 0xff);
buf[1] = (add_len & 0xff);
buf[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */
buf[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
return 0;
}
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff);
buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff);
buf[6] = ((add_len >> 8) & 0xff);
buf[7] = (add_len & 0xff);
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
return 0;
}
if (task->task_se_cmd->se_deve->lun_flags &
TRANSPORT_LUNFLAGS_READ_ONLY) {
- unsigned char *buf = transport_kmap_first_data_page(task->task_se_cmd);
+ unsigned char *buf = transport_kmap_data_sg(task->task_se_cmd);
if (cdb[0] == MODE_SENSE_10) {
if (!(buf[3] & 0x80))
buf[2] |= 0x80;
}
- transport_kunmap_first_data_page(task->task_se_cmd);
+ transport_kunmap_data_sg(task->task_se_cmd);
}
}
after_mode_sense:
struct se_lun *core_tpg_pre_dellun(
struct se_portal_group *tpg,
- u32 unpacked_lun,
- int *ret)
+ u32 unpacked_lun)
{
struct se_lun *lun;
static void scsi_dump_inquiry(struct se_device *dev)
{
struct t10_wwn *wwn = &dev->se_sub_dev->t10_wwn;
+ char buf[17];
int i, device_type;
/*
* Print Linux/SCSI style INQUIRY formatting to the kernel ring buffer
*/
- pr_debug(" Vendor: ");
for (i = 0; i < 8; i++)
if (wwn->vendor[i] >= 0x20)
- pr_debug("%c", wwn->vendor[i]);
+ buf[i] = wwn->vendor[i];
else
- pr_debug(" ");
+ buf[i] = ' ';
+ buf[i] = '\0';
+ pr_debug(" Vendor: %s\n", buf);
- pr_debug(" Model: ");
for (i = 0; i < 16; i++)
if (wwn->model[i] >= 0x20)
- pr_debug("%c", wwn->model[i]);
+ buf[i] = wwn->model[i];
else
- pr_debug(" ");
+ buf[i] = ' ';
+ buf[i] = '\0';
+ pr_debug(" Model: %s\n", buf);
- pr_debug(" Revision: ");
for (i = 0; i < 4; i++)
if (wwn->revision[i] >= 0x20)
- pr_debug("%c", wwn->revision[i]);
+ buf[i] = wwn->revision[i];
else
- pr_debug(" ");
-
- pr_debug("\n");
+ buf[i] = ' ';
+ buf[i] = '\0';
+ pr_debug(" Revision: %s\n", buf);
device_type = dev->transport->get_device_type(dev);
pr_debug(" Type: %s ", scsi_device_type(device_type));
* This may only be called from process context, and also currently
* assumes internal allocation of fabric payload buffer by target-core.
**/
-int target_submit_cmd(struct se_cmd *se_cmd, struct se_session *se_sess,
+void target_submit_cmd(struct se_cmd *se_cmd, struct se_session *se_sess,
unsigned char *cdb, unsigned char *sense, u32 unpacked_lun,
u32 data_length, int task_attr, int data_dir, int flags)
{
/*
* Locate se_lun pointer and attach it to struct se_cmd
*/
- if (transport_lookup_cmd_lun(se_cmd, unpacked_lun) < 0)
- goto out_check_cond;
+ if (transport_lookup_cmd_lun(se_cmd, unpacked_lun) < 0) {
+ transport_send_check_condition_and_sense(se_cmd,
+ se_cmd->scsi_sense_reason, 0);
+ target_put_sess_cmd(se_sess, se_cmd);
+ return;
+ }
/*
* Sanitize CDBs via transport_generic_cmd_sequencer() and
* allocate the necessary tasks to complete the received CDB+data
*/
rc = transport_generic_allocate_tasks(se_cmd, cdb);
- if (rc != 0)
- goto out_check_cond;
+ if (rc != 0) {
+ transport_generic_request_failure(se_cmd);
+ return;
+ }
/*
* Dispatch se_cmd descriptor to se_lun->lun_se_dev backend
* for immediate execution of READs, otherwise wait for
* when fabric has filled the incoming buffer.
*/
transport_handle_cdb_direct(se_cmd);
- return 0;
-
-out_check_cond:
- transport_send_check_condition_and_sense(se_cmd,
- se_cmd->scsi_sense_reason, 0);
- return 0;
+ return;
}
EXPORT_SYMBOL(target_submit_cmd);
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
if (target_check_write_same_discard(&cdb[10], dev) < 0)
- goto out_invalid_cdb_field;
+ goto out_unsupported_cdb;
if (!passthrough)
cmd->execute_task = target_emulate_write_same;
break;
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
if (target_check_write_same_discard(&cdb[1], dev) < 0)
- goto out_invalid_cdb_field;
+ goto out_unsupported_cdb;
if (!passthrough)
cmd->execute_task = target_emulate_write_same;
break;
* of byte 1 bit 3 UNMAP instead of original reserved field
*/
if (target_check_write_same_discard(&cdb[1], dev) < 0)
- goto out_invalid_cdb_field;
+ goto out_unsupported_cdb;
if (!passthrough)
cmd->execute_task = target_emulate_write_same;
break;
(cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)))
goto out_unsupported_cdb;
- /* Let's limit control cdbs to a page, for simplicity's sake. */
- if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) &&
- size > PAGE_SIZE)
- goto out_invalid_cdb_field;
-
transport_set_supported_SAM_opcode(cmd);
return ret;
}
EXPORT_SYMBOL(transport_generic_map_mem_to_cmd);
-void *transport_kmap_first_data_page(struct se_cmd *cmd)
+void *transport_kmap_data_sg(struct se_cmd *cmd)
{
struct scatterlist *sg = cmd->t_data_sg;
+ struct page **pages;
+ int i;
BUG_ON(!sg);
/*
* tcm_loop who may be using a contig buffer from the SCSI midlayer for
* control CDBs passed as SGLs via transport_generic_map_mem_to_cmd()
*/
- return kmap(sg_page(sg)) + sg->offset;
+ if (!cmd->t_data_nents)
+ return NULL;
+ else if (cmd->t_data_nents == 1)
+ return kmap(sg_page(sg)) + sg->offset;
+
+ /* >1 page. use vmap */
+ pages = kmalloc(sizeof(*pages) * cmd->t_data_nents, GFP_KERNEL);
+ if (!pages)
+ return NULL;
+
+ /* convert sg[] to pages[] */
+ for_each_sg(cmd->t_data_sg, sg, cmd->t_data_nents, i) {
+ pages[i] = sg_page(sg);
+ }
+
+ cmd->t_data_vmap = vmap(pages, cmd->t_data_nents, VM_MAP, PAGE_KERNEL);
+ kfree(pages);
+ if (!cmd->t_data_vmap)
+ return NULL;
+
+ return cmd->t_data_vmap + cmd->t_data_sg[0].offset;
}
-EXPORT_SYMBOL(transport_kmap_first_data_page);
+EXPORT_SYMBOL(transport_kmap_data_sg);
-void transport_kunmap_first_data_page(struct se_cmd *cmd)
+void transport_kunmap_data_sg(struct se_cmd *cmd)
{
- kunmap(sg_page(cmd->t_data_sg));
+ if (!cmd->t_data_nents)
+ return;
+ else if (cmd->t_data_nents == 1)
+ kunmap(sg_page(cmd->t_data_sg));
+
+ vunmap(cmd->t_data_vmap);
+ cmd->t_data_vmap = NULL;
}
-EXPORT_SYMBOL(transport_kunmap_first_data_page);
+EXPORT_SYMBOL(transport_kunmap_data_sg);
static int
transport_generic_get_mem(struct se_cmd *cmd)
u32 length = cmd->data_length;
unsigned int nents;
struct page *page;
+ gfp_t zero_flag;
int i = 0;
nents = DIV_ROUND_UP(length, PAGE_SIZE);
cmd->t_data_nents = nents;
sg_init_table(cmd->t_data_sg, nents);
+ zero_flag = cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB ? 0 : __GFP_ZERO;
+
while (length) {
u32 page_len = min_t(u32, length, PAGE_SIZE);
- page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+ page = alloc_page(GFP_KERNEL | zero_flag);
if (!page)
goto out;
struct se_task *task;
unsigned long flags;
+ /* Workaround for handling zero-length control CDBs */
+ if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) &&
+ !cmd->data_length)
+ return 0;
+
task = transport_generic_get_task(cmd, cmd->data_direction);
if (!task)
return -ENOMEM;
else if (!task_cdbs && (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)) {
cmd->t_state = TRANSPORT_COMPLETE;
atomic_set(&cmd->t_transport_active, 1);
+
+ if (cmd->t_task_cdb[0] == REQUEST_SENSE) {
+ u8 ua_asc = 0, ua_ascq = 0;
+
+ core_scsi3_ua_clear_for_request_sense(cmd,
+ &ua_asc, &ua_ascq);
+ }
+
INIT_WORK(&cmd->work, target_complete_ok_work);
queue_work(target_completion_wq, &cmd->work);
return 0;
/* CURRENT ERROR */
buffer[offset] = 0x70;
buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10;
- /* ABORTED COMMAND */
- buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND;
+ /* ILLEGAL REQUEST */
+ buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
/* INVALID FIELD IN CDB */
buffer[offset+SPC_ASC_KEY_OFFSET] = 0x24;
break;
/* CURRENT ERROR */
buffer[offset] = 0x70;
buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10;
- /* ABORTED COMMAND */
- buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND;
+ /* ILLEGAL REQUEST */
+ buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
/* INVALID FIELD IN PARAMETER LIST */
buffer[offset+SPC_ASC_KEY_OFFSET] = 0x26;
break;
int data_dir = 0;
u32 data_len;
int task_attr;
- int ret;
fcp = fc_frame_payload_get(cmd->req_frame, sizeof(*fcp));
if (!fcp)
* Use a single se_cmd->cmd_kref as we expect to release se_cmd
* directly from ft_check_stop_free callback in response path.
*/
- ret = target_submit_cmd(&cmd->se_cmd, cmd->sess->se_sess, cmd->cdb,
+ target_submit_cmd(&cmd->se_cmd, cmd->sess->se_sess, cmd->cdb,
&cmd->ft_sense_buffer[0], cmd->lun, data_len,
task_attr, data_dir, 0);
- pr_debug("r_ctl %x alloc target_submit_cmd %d\n", fh->fh_r_ctl, ret);
- if (ret < 0) {
- ft_dump_cmd(cmd, __func__);
- return;
- }
+ pr_debug("r_ctl %x alloc target_submit_cmd\n", fh->fh_r_ctl);
return;
err:
#include "8250.h"
#ifdef CONFIG_SPARC
-#include "suncore.h"
+#include "../suncore.h"
#endif
/*
#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/
+/* SCR register bitmasks */
+#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7)
+
+/* FCR register bitmasks */
+#define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT 6
+#define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6)
+
static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
/* Forward declaration of functions */
static void serial_omap_stop_tx(struct uart_port *port)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
if (up->use_dma &&
up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) {
serial_out(up, UART_IER, up->ier);
}
+ if (!up->use_dma && pdata->set_forceidle)
+ pdata->set_forceidle(up->pdev);
+
pm_runtime_mark_last_busy(&up->pdev->dev);
pm_runtime_put_autosuspend(&up->pdev->dev);
}
static void serial_omap_start_tx(struct uart_port *port)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
struct circ_buf *xmit;
unsigned int start;
int ret = 0;
if (!up->use_dma) {
pm_runtime_get_sync(&up->pdev->dev);
serial_omap_enable_ier_thri(up);
+ if (pdata->set_noidle)
+ pdata->set_noidle(up->pdev);
pm_runtime_mark_last_busy(&up->pdev->dev);
pm_runtime_put_autosuspend(&up->pdev->dev);
return;
quot = serial_omap_get_divisor(port, baud);
/* calculate wakeup latency constraint */
- up->calc_latency = (1000000 * up->port.fifosize) /
- (1000 * baud / 8);
+ up->calc_latency = (USEC_PER_SEC * up->port.fifosize) / (baud / 8);
up->latency = up->calc_latency;
schedule_work(&up->qos_work);
up->mcr = serial_in(up, UART_MCR);
serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
/* FIFO ENABLE, DMA MODE */
- serial_out(up, UART_FCR, up->fcr);
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+
+ up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK;
if (up->use_dma) {
serial_out(up, UART_TI752_TLR, 0);
- up->scr |= (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8);
+ up->scr |= UART_FCR_TRIGGER_4;
+ } else {
+ /* Set receive FIFO threshold to 1 byte */
+ up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK;
+ up->fcr |= (0x1 << OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT);
}
+ serial_out(up, UART_FCR, up->fcr);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+
serial_out(up, UART_OMAP_SCR, up->scr);
serial_out(up, UART_EFR, up->efr);
#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
#endif
-#ifdef CONFIG_CPU_EXYNOS4210
+#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \
+ defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
.info = &(struct s3c24xx_uart_info) {
.name = "Samsung Exynos4 UART",
if (!perm && op->op != KD_FONT_OP_GET)
return -EPERM;
op->data = compat_ptr(((struct compat_console_font_op *)op)->data);
- op->flags |= KD_FONT_FLAG_OLD;
i = con_font_op(vc, op);
if (i)
return i;
return -ENODEV;
dev->current_state = PCI_D0;
- if (!dev->irq) {
+ /* The xHCI driver supports MSI and MSI-X,
+ * so don't fail if the BIOS doesn't provide a legacy IRQ.
+ */
+ if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
dev_err(&dev->dev,
"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
pci_name(dev));
&& device_can_wakeup(&hcd->self.root_hub->dev))
dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
- /* enable irqs just before we start the controller */
- if (usb_hcd_is_primary_hcd(hcd)) {
+ /* enable irqs just before we start the controller,
+ * if the BIOS provides legacy PCI irqs.
+ */
+ if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
if (retval)
goto err_request_irq;
if (type == HUB_INIT3)
goto init3;
- /* After a resume, port power should still be on.
+ /* The superspeed hub except for root hub has to use Hub Depth
+ * value as an offset into the route string to locate the bits
+ * it uses to determine the downstream port number. So hub driver
+ * should send a set hub depth request to superspeed hub after
+ * the superspeed hub is set configuration in initialization or
+ * reset procedure.
+ *
+ * After a resume, port power should still be on.
* For any other type of activation, turn it on.
*/
if (type != HUB_RESUME) {
+ if (hdev->parent && hub_is_superspeed(hdev)) {
+ ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+ HUB_SET_DEPTH, USB_RT_HUB,
+ hdev->level - 1, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ dev_err(hub->intfdev,
+ "set hub depth failed\n");
+ }
/* Speed up system boot by using a delayed_work for the
* hub's initial power-up delays. This is pretty awkward
goto fail;
}
- if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
- ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
- HUB_SET_DEPTH, USB_RT_HUB,
- hdev->level - 1, 0, NULL, 0,
- USB_CTRL_SET_TIMEOUT);
-
- if (ret < 0) {
- message = "can't set hub depth";
- goto fail;
- }
- }
-
/* Request the entire hub descriptor.
* hub->descriptor can handle USB_MAXCHILDREN ports,
* but the hub can/will return fewer bytes here.
/* support autoresume for remote wakeup testing */
if (autoresume)
- sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
/* support OTG systems */
if (gadget_is_otg(cdev->gadget)) {
tristate
config USB_EHCI_FSL
- bool "Support for Freescale on-chip EHCI USB controller"
+ bool "Support for Freescale PPC on-chip EHCI USB controller"
depends on USB_EHCI_HCD && FSL_SOC
select USB_EHCI_ROOT_HUB_TT
select USB_FSL_MPH_DR_OF if OF
Variation of ARC USB block used in some Freescale chips.
config USB_EHCI_MXC
- bool "Support for Freescale on-chip EHCI USB controller"
+ bool "Support for Freescale i.MX on-chip EHCI USB controller"
depends on USB_EHCI_HCD && ARCH_MXC
select USB_EHCI_ROOT_HUB_TT
---help---
config USB_WHCI_HCD
tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
depends on EXPERIMENTAL
- depends on PCI && USB
+ depends on PCI && USB && UWB
select USB_WUSB
select UWB_WHCI
help
config USB_HWA_HCD
tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)"
depends on EXPERIMENTAL
- depends on USB
+ depends on USB && UWB
select USB_WUSB
select UWB_HWA
help
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
}
-static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
+static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
{
struct usb_hcd *hcd = ehci_to_hcd(ehci);
struct fsl_usb2_platform_data *pdata;
#endif
out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
}
+
+ if (!(in_be32(non_ehci + FSL_SOC_USB_CTRL) & CTRL_PHY_CLK_VALID)) {
+ printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n");
+ return -ENODEV;
+ }
+ return 0;
}
/* called after powerup, by probe or system-pm "wakeup" */
static int ehci_fsl_reinit(struct ehci_hcd *ehci)
{
- ehci_fsl_usb_setup(ehci);
+ if (ehci_fsl_usb_setup(ehci))
+ return -ENODEV;
ehci_port_power(ehci, 0);
return 0;
#define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */
#define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */
#define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */
+#define CTRL_PHY_CLK_VALID (1 << 17)
#define SNOOP_SIZE_2GB 0x1e
#endif /* _EHCI_FSL_H */
static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
{
+ /* Skip Netlogic mips SoC's internal PCI USB controller.
+ * This device does not need/support EHCI/OHCI handoff
+ */
+ if (pdev->vendor == 0x184e) /* vendor Netlogic */
+ return;
+ if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
+ return;
+
+ if (pci_enable_device(pdev) < 0) {
+ dev_warn(&pdev->dev, "Can't enable PCI device, "
+ "BIOS handoff failed.\n");
+ return;
+ }
if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
quirk_usb_handoff_uhci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
quirk_usb_disable_ehci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
quirk_usb_handoff_xhci(pdev);
+ pci_disable_device(pdev);
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
*/
memset(port_removable, 0, sizeof(port_removable));
for (i = 0; i < ports; i++) {
- portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+ portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
/* If a device is removable, PORTSC reports a 0, same as in the
* hub descriptor DeviceRemovable bits.
*/
}
/*
- * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
* microframes, rounded down to nearest power of 2.
*/
-static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
- struct usb_host_endpoint *ep)
+static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
+ struct usb_host_endpoint *ep, unsigned int desc_interval,
+ unsigned int min_exponent, unsigned int max_exponent)
{
unsigned int interval;
- interval = fls(8 * ep->desc.bInterval) - 1;
- interval = clamp_val(interval, 3, 10);
- if ((1 << interval) != 8 * ep->desc.bInterval)
+ interval = fls(desc_interval) - 1;
+ interval = clamp_val(interval, min_exponent, max_exponent);
+ if ((1 << interval) != desc_interval)
dev_warn(&udev->dev,
"ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
ep->desc.bEndpointAddress,
1 << interval,
- 8 * ep->desc.bInterval);
+ desc_interval);
return interval;
}
+static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ return xhci_microframes_to_exponent(udev, ep,
+ ep->desc.bInterval, 0, 15);
+}
+
+
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ return xhci_microframes_to_exponent(udev, ep,
+ ep->desc.bInterval * 8, 3, 10);
+}
+
/* Return the polling or NAK interval.
*
* The polling interval is expressed in "microframes". If xHCI's Interval field
/* Max NAK rate */
if (usb_endpoint_xfer_control(&ep->desc) ||
usb_endpoint_xfer_bulk(&ep->desc)) {
- interval = ep->desc.bInterval;
+ interval = xhci_parse_microframe_interval(udev, ep);
break;
}
/* Fall through - SS and HS isoc/int have same decoding */
/* hcd->irq is -1, we have MSI */
return 0;
+ if (!pdev->irq) {
+ xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
+ return -EINVAL;
+ }
+
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
#if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \
&& !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \
- && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN)
+ && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) \
+ && !defined(CONFIG_MIPS)
static inline void readsl(const void __iomem *addr, void *buf, int len)
{ insl((unsigned long)addr, buf, len); }
static inline void readsw(const void __iomem *addr, void *buf, int len)
config USB_MV_OTG
tristate "Marvell USB OTG support"
- depends on USB_MV_UDC && USB_SUSPEND
+ depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
select USB_OTG
select USB_OTG_UTILS
help
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+ { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+ { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
*/
/* ZigBee controller */
#define FTDI_RF_R106 0x8A28
+
+/*
+ * Product: HCP HIT GPRS modem
+ * Manufacturer: HCP d.o.o.
+ * ATI command output: Cinterion MC55i
+ */
+#define FTDI_CINTERION_MC55I_PID 0xA951
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
- /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
- /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0083, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0087, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0088, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0089, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0090, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0091, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0092, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0093, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0146, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0149, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0150, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0154, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
+ 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
- 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
+
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */
{USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
{USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */
+ {USB_DEVICE(0x1410, 0xa010)}, /* Novatel Gobi QDL device */
+ {USB_DEVICE(0x1410, 0xa011)}, /* Novatel Gobi QDL device */
+ {USB_DEVICE(0x1410, 0xa012)}, /* Novatel Gobi QDL device */
+ {USB_DEVICE(0x1410, 0xa013)}, /* Novatel Gobi QDL device */
+ {USB_DEVICE(0x1410, 0xa014)}, /* Novatel Gobi QDL device */
{USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
{USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */
{USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
{USB_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */
{USB_DEVICE(0x05c6, 0x9204)}, /* Gobi 2000 QDL device */
{USB_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */
+
+ {USB_DEVICE(0x05c6, 0x920c)}, /* Gobi 3000 QDL */
+ {USB_DEVICE(0x05c6, 0x920d)}, /* Gobi 3000 Composite */
+ {USB_DEVICE(0x1410, 0xa020)}, /* Novatel Gobi 3000 QDL */
+ {USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */
+ {USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */
+ {USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */
{USB_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+ {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */
+ {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
spin_lock_init(&data->susp_lock);
- usb_enable_autosuspend(serial->dev);
-
switch (nintf) {
case 1:
/* QDL mode */
/* the array dimension is the number of default entries plus */
/* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
/* null entry */
-static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+ { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
};
-static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+ { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
{ }
};
#define MTS_MT9234ZBA_PRODUCT_ID 0xF115
#define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319
+/* Abbott Diabetics vendor and product ids */
+#define ABBOTT_VENDOR_ID 0x1a61
+#define ABBOTT_PRODUCT_ID 0x3410
+
/* Commands */
#define TI_GET_VERSION 0x01
#define TI_GET_PORT_STATUS 0x02
struct Scsi_Host *host = us_to_host(us);
/* If the device is really gone, cut short reset delays */
- if (us->pusb_dev->state == USB_STATE_NOTATTACHED)
+ if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
+ wake_up(&us->delay_wait);
+ }
- /* Prevent SCSI-scanning (if it hasn't started yet)
- * and wait for the SCSI-scanning thread to stop.
+ /* Prevent SCSI scanning (if it hasn't started yet)
+ * or wait for the SCSI-scanning routine to stop.
*/
- set_bit(US_FLIDX_DONT_SCAN, &us->dflags);
- wake_up(&us->delay_wait);
- wait_for_completion(&us->scanning_done);
+ cancel_delayed_work_sync(&us->scan_dwork);
+
+ /* Balance autopm calls if scanning was cancelled */
+ if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
+ usb_autopm_put_interface_no_suspend(us->pusb_intf);
/* Removing the host will perform an orderly shutdown: caches
* synchronized, disks spun down, etc.
scsi_host_put(us_to_host(us));
}
-/* Thread to carry out delayed SCSI-device scanning */
-static int usb_stor_scan_thread(void * __us)
+/* Delayed-work routine to carry out SCSI-device scanning */
+static void usb_stor_scan_dwork(struct work_struct *work)
{
- struct us_data *us = (struct us_data *)__us;
+ struct us_data *us = container_of(work, struct us_data,
+ scan_dwork.work);
struct device *dev = &us->pusb_intf->dev;
- dev_dbg(dev, "device found\n");
-
- set_freezable();
+ dev_dbg(dev, "starting scan\n");
- /*
- * Wait for the timeout to expire or for a disconnect
- *
- * We can't freeze in this thread or we risk causing khubd to
- * fail to freeze, but we can't be non-freezable either. Nor can
- * khubd freeze while waiting for scanning to complete as it may
- * hold the device lock, causing a hang when suspending devices.
- * So instead of using wait_event_freezable(), explicitly test
- * for (DONT_SCAN || freezing) in interruptible wait and proceed
- * if any of DONT_SCAN, freezing or timeout has happened.
- */
- if (delay_use > 0) {
- dev_dbg(dev, "waiting for device to settle "
- "before scanning\n");
- wait_event_interruptible_timeout(us->delay_wait,
- test_bit(US_FLIDX_DONT_SCAN, &us->dflags) ||
- freezing(current), delay_use * HZ);
+ /* For bulk-only devices, determine the max LUN value */
+ if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) {
+ mutex_lock(&us->dev_mutex);
+ us->max_lun = usb_stor_Bulk_max_lun(us);
+ mutex_unlock(&us->dev_mutex);
}
+ scsi_scan_host(us_to_host(us));
+ dev_dbg(dev, "scan complete\n");
- /* If the device is still connected, perform the scanning */
- if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
-
- /* For bulk-only devices, determine the max LUN value */
- if (us->protocol == USB_PR_BULK &&
- !(us->fflags & US_FL_SINGLE_LUN)) {
- mutex_lock(&us->dev_mutex);
- us->max_lun = usb_stor_Bulk_max_lun(us);
- mutex_unlock(&us->dev_mutex);
- }
- scsi_scan_host(us_to_host(us));
- dev_dbg(dev, "scan complete\n");
-
- /* Should we unbind if no devices were detected? */
- }
+ /* Should we unbind if no devices were detected? */
usb_autopm_put_interface(us->pusb_intf);
- complete_and_exit(&us->scanning_done, 0);
+ clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
}
static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
init_completion(&us->cmnd_ready);
init_completion(&(us->notify));
init_waitqueue_head(&us->delay_wait);
- init_completion(&us->scanning_done);
+ INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
/* Associate the us_data structure with the USB device */
result = associate_dev(us, intf);
/* Second part of general USB mass-storage probing */
int usb_stor_probe2(struct us_data *us)
{
- struct task_struct *th;
int result;
struct device *dev = &us->pusb_intf->dev;
goto BadDevice;
}
- /* Start up the thread for delayed SCSI-device scanning */
- th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
- if (IS_ERR(th)) {
- dev_warn(dev,
- "Unable to start the device-scanning thread\n");
- complete(&us->scanning_done);
- quiesce_and_remove_host(us);
- result = PTR_ERR(th);
- goto BadDevice;
- }
-
+ /* Submit the delayed_work for SCSI-device scanning */
usb_autopm_get_interface_no_resume(us->pusb_intf);
- wake_up_process(th);
+ set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
+ if (delay_use > 0)
+ dev_dbg(dev, "waiting for device to settle before scanning\n");
+ queue_delayed_work(system_freezable_wq, &us->scan_dwork,
+ delay_use * HZ);
return 0;
/* We come here if there are any problems */
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/mutex.h>
+#include <linux/workqueue.h>
#include <scsi/scsi_host.h>
struct us_data;
#define US_FLIDX_DISCONNECTING 3 /* disconnect in progress */
#define US_FLIDX_RESETTING 4 /* device reset in progress */
#define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */
-#define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */
+#define US_FLIDX_SCAN_PENDING 6 /* scanning not yet done */
#define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */
#define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */
/* mutual exclusion and synchronization structures */
struct completion cmnd_ready; /* to sleep thread on */
struct completion notify; /* thread begin/end */
- wait_queue_head_t delay_wait; /* wait during scan, reset */
- struct completion scanning_done; /* wait for scan thread */
+ wait_queue_head_t delay_wait; /* wait during reset */
+ struct delayed_work scan_dwork; /* for async scanning */
/* subdriver information */
void *extra; /* Any extra data */
*/
lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
- sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
+ sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_CTR);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(0);
struct fsl_diu_data *data;
data = dev_get_drvdata(&ofdev->dev);
- disable_lcdc(data->fsl_diu_info[0]);
+ disable_lcdc(data->fsl_diu_info);
return 0;
}
struct fsl_diu_data *data;
data = dev_get_drvdata(&ofdev->dev);
- enable_lcdc(data->fsl_diu_info[0]);
+ enable_lcdc(data->fsl_diu_info);
return 0;
}
if (fb_alloc_cmap(&info->cmap, 256, 1) < 0) {
ERR_MSG("Could not allocate cmap for intelfb_info.\n");
goto err_out_cmap;
- return -ENODEV;
}
dinfo = info->par;
config PANEL_DVI
tristate "DVI output"
- depends on OMAP2_DSS_DPI
+ depends on OMAP2_DSS_DPI && I2C
help
Driver for external monitors, connected via DVI. The driver uses i2c
to read EDID information from the monitor.
spin_unlock_irqrestore(&data_lock, flags);
+ /* wait for overlay to be enabled */
+ wait_pending_extra_info_updates();
+
mutex_unlock(&apply_lock);
return 0;
spin_unlock_irqrestore(&data_lock, flags);
+ /* wait for the overlay to be disabled */
+ wait_pending_extra_info_updates();
+
mutex_unlock(&apply_lock);
return 0;
DSSDBG("dispc_runtime_put\n");
- r = pm_runtime_put(&dispc.pdev->dev);
+ r = pm_runtime_put_sync(&dispc.pdev->dev);
WARN_ON(r < 0);
}
{
int r;
+ if (cpu_is_omap34xx() && !dpi.vdds_dsi_reg) {
+ DSSERR("no VDSS_DSI regulator\n");
+ return -ENODEV;
+ }
+
if (dssdev->manager == NULL) {
DSSERR("failed to enable display: no manager\n");
return -ENODEV;
DSSDBG("dsi_runtime_put\n");
- r = pm_runtime_put(&dsi->pdev->dev);
+ r = pm_runtime_put_sync(&dsi->pdev->dev);
WARN_ON(r < 0);
}
DSSDBG("dss_runtime_put\n");
- r = pm_runtime_put(&dss.pdev->dev);
+ r = pm_runtime_put_sync(&dss.pdev->dev);
WARN_ON(r < 0);
}
DSSDBG("hdmi_runtime_get\n");
+ /*
+ * HACK: Add dss_runtime_get() to ensure DSS clock domain is enabled.
+ * This should be removed later.
+ */
+ r = dss_runtime_get();
+ if (r < 0)
+ goto err_get_dss;
+
r = pm_runtime_get_sync(&hdmi.pdev->dev);
WARN_ON(r < 0);
- return r < 0 ? r : 0;
+ if (r < 0)
+ goto err_get_hdmi;
+
+ return 0;
+
+err_get_hdmi:
+ dss_runtime_put();
+err_get_dss:
+ return r;
}
static void hdmi_runtime_put(void)
DSSDBG("hdmi_runtime_put\n");
- r = pm_runtime_put(&hdmi.pdev->dev);
+ r = pm_runtime_put_sync(&hdmi.pdev->dev);
WARN_ON(r < 0);
+
+ /*
+ * HACK: This is added to complement the dss_runtime_get() call in
+ * hdmi_runtime_get(). This should be removed later.
+ */
+ dss_runtime_put();
}
int hdmi_init_display(struct omap_dss_device *dssdev)
int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
{
+ struct omap_dss_hdmi_data *priv = dssdev->data;
int r = 0;
DSSDBG("ENTER hdmi_display_enable\n");
goto err0;
}
+ hdmi.ip_data.hpd_gpio = priv->hpd_gpio;
+
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
DSSDBG("rfbi_runtime_put\n");
- r = pm_runtime_put(&rfbi.pdev->dev);
+ r = pm_runtime_put_sync(&rfbi.pdev->dev);
WARN_ON(r < 0);
}
const struct ti_hdmi_ip_ops *ops;
struct hdmi_config cfg;
struct hdmi_pll_info pll_data;
+
+ /* ti_hdmi_4xxx_ip private data. These should be in a separate struct */
+ int hpd_gpio;
+ bool phy_tx_enabled;
};
int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data);
void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data);
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/seq_file.h>
+#include <linux/gpio.h>
#include "ti_hdmi_4xxx_ip.h"
#include "dss.h"
hdmi_set_pll_pwr(ip_data, HDMI_PLLPWRCMD_ALLOFF);
}
+static int hdmi_check_hpd_state(struct hdmi_ip_data *ip_data)
+{
+ unsigned long flags;
+ bool hpd;
+ int r;
+ /* this should be in ti_hdmi_4xxx_ip private data */
+ static DEFINE_SPINLOCK(phy_tx_lock);
+
+ spin_lock_irqsave(&phy_tx_lock, flags);
+
+ hpd = gpio_get_value(ip_data->hpd_gpio);
+
+ if (hpd == ip_data->phy_tx_enabled) {
+ spin_unlock_irqrestore(&phy_tx_lock, flags);
+ return 0;
+ }
+
+ if (hpd)
+ r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON);
+ else
+ r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_LDOON);
+
+ if (r) {
+ DSSERR("Failed to %s PHY TX power\n",
+ hpd ? "enable" : "disable");
+ goto err;
+ }
+
+ ip_data->phy_tx_enabled = hpd;
+err:
+ spin_unlock_irqrestore(&phy_tx_lock, flags);
+ return r;
+}
+
+static irqreturn_t hpd_irq_handler(int irq, void *data)
+{
+ struct hdmi_ip_data *ip_data = data;
+
+ hdmi_check_hpd_state(ip_data);
+
+ return IRQ_HANDLED;
+}
+
int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data)
{
u16 r = 0;
if (r)
return r;
- r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON);
- if (r)
- return r;
-
/*
* Read address 0 in order to get the SCP reset done completed
* Dummy access performed to make sure reset is done
/* Write to phy address 3 to change the polarity control */
REG_FLD_MOD(phy_base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27);
+ r = request_threaded_irq(gpio_to_irq(ip_data->hpd_gpio),
+ NULL, hpd_irq_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING, "hpd", ip_data);
+ if (r) {
+ DSSERR("HPD IRQ request failed\n");
+ hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF);
+ return r;
+ }
+
+ r = hdmi_check_hpd_state(ip_data);
+ if (r) {
+ free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data);
+ hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF);
+ return r;
+ }
+
return 0;
}
void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data)
{
+ free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data);
+
hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF);
+ ip_data->phy_tx_enabled = false;
}
static int hdmi_core_ddc_init(struct hdmi_ip_data *ip_data)
bool ti_hdmi_4xxx_detect(struct hdmi_ip_data *ip_data)
{
- int r;
-
- void __iomem *base = hdmi_core_sys_base(ip_data);
-
- /* HPD */
- r = REG_GET(base, HDMI_CORE_SYS_SYS_STAT, 1, 1);
-
- return r == 1;
+ return gpio_get_value(ip_data->hpd_gpio);
}
static void hdmi_core_init(struct hdmi_core_video_config *video_cfg,
DSSDBG("venc_runtime_put\n");
- r = pm_runtime_put(&venc.pdev->dev);
+ r = pm_runtime_put_sync(&venc.pdev->dev);
WARN_ON(r < 0);
}
int (*init)(void);
void (*exit)(void);
char name[16];
-} board_driver[] = {
+} board_driver[] __refdata = {
#ifdef CONFIG_SH_DREAMCAST
{ pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" },
#endif
break;
}
+ /* magic required on VX900 for correct modesetting on IGA1 */
+ via_write_reg_mask(VIACR, 0x45, 0x00, 0x01);
+
/* probably this should go to the scaling code one day */
+ via_write_reg_mask(VIACR, 0xFD, 0, 0x80); /* VX900 hw scale on IGA2 */
viafb_write_regx(scaling_parameters, ARRAY_SIZE(scaling_parameters));
/* Fill VPIT Parameters */
#ifdef CONFIG_PM
static int virtballoon_freeze(struct virtio_device *vdev)
{
+ struct virtio_balloon *vb = vdev->priv;
+
/*
* The kthread is already frozen by the PM core before this
* function is called.
*/
+ while (vb->num_pages)
+ leak_balloon(vb, vb->num_pages);
+ update_balloon_size(vb);
+
/* Ensure we don't get any more requests from the host */
vdev->config->reset(vdev);
vdev->config->del_vqs(vdev);
return 0;
}
+static int restore_common(struct virtio_device *vdev)
+{
+ struct virtio_balloon *vb = vdev->priv;
+ int ret;
+
+ ret = init_vqs(vdev->priv);
+ if (ret)
+ return ret;
+
+ fill_balloon(vb, towards_target(vb));
+ update_balloon_size(vb);
+ return 0;
+}
+
static int virtballoon_thaw(struct virtio_device *vdev)
{
- return init_vqs(vdev->priv);
+ return restore_common(vdev);
}
static int virtballoon_restore(struct virtio_device *vdev)
{
struct virtio_balloon *vb = vdev->priv;
- struct page *page, *page2;
-
- /* We're starting from a clean slate */
- vb->num_pages = 0;
/*
* If a request wasn't complete at the time of freezing, this
*/
vb->need_stats_update = 0;
- /* We don't have these pages in the balloon anymore! */
- list_for_each_entry_safe(page, page2, &vb->pages, lru) {
- list_del(&page->lru);
- totalram_pages++;
- }
- return init_vqs(vdev->priv);
+ return restore_common(vdev);
}
#endif
For Freescale Book-E processors, this is a number between 0 and 63.
For other Book-E processors, this is a number between 0 and 3.
- The value can be overidden by the wdt_period command-line parameter.
+ The value can be overridden by the wdt_period command-line parameter.
# PPC64 Architecture
booke_wdt_period = tmp;
#endif
booke_wdt_set();
- return 0;
+ /* Fall */
case WDIOC_GETTIMEOUT:
+#ifdef CONFIG_FSL_BOOKE
+ return put_user(period_to_sec(booke_wdt_period), p);
+#else
return put_user(booke_wdt_period, p);
+#endif
default:
return -ENOTTY;
}
cmn_regs.u1.reax = CRU_BIOS_SIGNATURE_VALUE;
- set_memory_x((unsigned long)bios32_entrypoint, (2 * PAGE_SIZE));
+ set_memory_x((unsigned long)bios32_map, 2);
asminline_call(&cmn_regs, bios32_entrypoint);
if (cmn_regs.u1.ral != 0) {
cru_rom_addr =
ioremap(cru_physical_address, cru_length);
if (cru_rom_addr) {
- set_memory_x((unsigned long)cru_rom_addr, cru_length);
+ set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK,
+ (cru_length + PAGE_SIZE - 1) >> PAGE_SHIFT);
retval = 0;
}
}
wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (wdt_mem == NULL) {
printk(KERN_INFO MODULE_NAME
- "failed to get memory region resouce\n");
+ "failed to get memory region resource\n");
return -ENOENT;
}
dev = &pdev->dev;
wdt_dev = &pdev->dev;
- /* get the memory region for the watchdog timer */
-
wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (wdt_mem == NULL) {
dev_err(dev, "no memory resource specified\n");
return -ENOENT;
}
+ wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (wdt_irq == NULL) {
+ dev_err(dev, "no irq resource specified\n");
+ ret = -ENOENT;
+ goto err;
+ }
+
+ /* get the memory region for the watchdog timer */
+
size = resource_size(wdt_mem);
if (!request_mem_region(wdt_mem->start, size, pdev->name)) {
dev_err(dev, "failed to get memory region\n");
- return -EBUSY;
+ ret = -EBUSY;
+ goto err;
}
wdt_base = ioremap(wdt_mem->start, size);
DBG("probe: mapped wdt_base=%p\n", wdt_base);
- wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (wdt_irq == NULL) {
- dev_err(dev, "no irq resource specified\n");
- ret = -ENOENT;
- goto err_map;
- }
-
- ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev);
- if (ret != 0) {
- dev_err(dev, "failed to install irq (%d)\n", ret);
- goto err_map;
- }
-
wdt_clock = clk_get(&pdev->dev, "watchdog");
if (IS_ERR(wdt_clock)) {
dev_err(dev, "failed to find watchdog clock source\n");
ret = PTR_ERR(wdt_clock);
- goto err_irq;
+ goto err_map;
}
clk_enable(wdt_clock);
- if (s3c2410wdt_cpufreq_register() < 0) {
+ ret = s3c2410wdt_cpufreq_register();
+ if (ret < 0) {
printk(KERN_ERR PFX "failed to register cpufreq\n");
goto err_clk;
}
"cannot start\n");
}
+ ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev);
+ if (ret != 0) {
+ dev_err(dev, "failed to install irq (%d)\n", ret);
+ goto err_cpufreq;
+ }
+
watchdog_set_nowayout(&s3c2410_wdd, nowayout);
ret = watchdog_register_device(&s3c2410_wdd);
if (ret) {
dev_err(dev, "cannot register watchdog (%d)\n", ret);
- goto err_cpufreq;
+ goto err_irq;
}
if (tmr_atboot && started == 0) {
return 0;
+ err_irq:
+ free_irq(wdt_irq->start, pdev);
+
err_cpufreq:
s3c2410wdt_cpufreq_deregister();
err_clk:
clk_disable(wdt_clock);
clk_put(wdt_clock);
-
- err_irq:
- free_irq(wdt_irq->start, pdev);
+ wdt_clock = NULL;
err_map:
iounmap(wdt_base);
err_req:
release_mem_region(wdt_mem->start, size);
- wdt_mem = NULL;
+ err:
+ wdt_irq = NULL;
+ wdt_mem = NULL;
return ret;
}
{
watchdog_unregister_device(&s3c2410_wdd);
+ free_irq(wdt_irq->start, dev);
+
s3c2410wdt_cpufreq_deregister();
clk_disable(wdt_clock);
clk_put(wdt_clock);
wdt_clock = NULL;
- free_irq(wdt_irq->start, dev);
- wdt_irq = NULL;
-
iounmap(wdt_base);
release_mem_region(wdt_mem->start, resource_size(wdt_mem));
+ wdt_irq = NULL;
wdt_mem = NULL;
return 0;
}
sprintf(dir, "cpu/%u", cpu);
err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state);
if (err != 1) {
- printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
+ if (!xen_initial_domain())
+ printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
return err;
}
int err;
err =
- sscanf(buf, " %04x:%02x:%02x.%1x-%08x:%1x:%08x", domain, bus, slot,
+ sscanf(buf, " %04x:%02x:%02x.%d-%08x:%1x:%08x", domain, bus, slot,
func, reg, size, mask);
if (err == 7)
return 0;
pci_dev_id->bus = bus;
pci_dev_id->devfn = PCI_DEVFN(slot, func);
- pr_debug(DRV_NAME ": wants to seize %04x:%02x:%02x.%01x\n",
+ pr_debug(DRV_NAME ": wants to seize %04x:%02x:%02x.%d\n",
domain, bus, slot, func);
spin_lock_irqsave(&device_ids_lock, flags);
err = 0;
- pr_debug(DRV_NAME ": removed %04x:%02x:%02x.%01x from "
+ pr_debug(DRV_NAME ": removed %04x:%02x:%02x.%d from "
"seize list\n", domain, bus, slot, func);
}
}
break;
count += scnprintf(buf + count, PAGE_SIZE - count,
- "%04x:%02x:%02x.%01x\n",
+ "%04x:%02x:%02x.%d\n",
pci_dev_id->domain, pci_dev_id->bus,
PCI_SLOT(pci_dev_id->devfn),
PCI_FUNC(pci_dev_id->devfn));
goto out;
}
+ /* Note: The PV protocol uses %02x, don't change it */
err = xenbus_printf(XBT_NIL, pdev->xdev->nodename, str,
"%04x:%02x:%02x.%02x", domain, bus,
PCI_SLOT(devfn), PCI_FUNC(devfn));
err = -EINVAL;
xenbus_dev_fatal(pdev->xdev, err,
"Couldn't locate PCI device "
- "(%04x:%02x:%02x.%01x)! "
+ "(%04x:%02x:%02x.%d)! "
"perhaps already in-use?",
domain, bus, slot, func);
goto out;
if (!dev) {
err = -EINVAL;
dev_dbg(&pdev->xdev->dev, "Couldn't locate PCI device "
- "(%04x:%02x:%02x.%01x)! not owned by this domain\n",
+ "(%04x:%02x:%02x.%d)! not owned by this domain\n",
domain, bus, slot, func);
goto out;
}
goto out;
}
token++;
+ if (memchr(token, 0, u->u.msg.len - (token - path)) == NULL) {
+ rc = -EILSEQ;
+ goto out;
+ }
if (msg_type == XS_WATCH) {
watch = alloc_watch_adapter(path, token);
int sub_version;
int min_proto;
int max_proto;
+ int compat_daemon;
unsigned long exp_timeout;
unsigned int type;
int reghost_enabled;
sbi->pipefd = pipefd;
sbi->pipe = pipe;
sbi->catatonic = 0;
+ sbi->compat_daemon = is_compat_task();
}
out:
mutex_unlock(&sbi->wq_mutex);
/* Negative dentry - try next */
if (!simple_positive(q)) {
spin_unlock(&p->d_lock);
+ lock_set_subclass(&q->d_lock.dep_map, 0, _RET_IP_);
p = q;
goto again;
}
/* Negative dentry - try next */
if (!simple_positive(ret)) {
spin_unlock(&p->d_lock);
+ lock_set_subclass(&ret->d_lock.dep_map, 0, _RET_IP_);
p = ret;
goto again;
}
#include <linux/parser.h>
#include <linux/bitops.h>
#include <linux/magic.h>
+#include <linux/compat.h>
#include "autofs_i.h"
#include <linux/module.h>
set_autofs_type_indirect(&sbi->type);
sbi->min_proto = 0;
sbi->max_proto = 0;
+ sbi->compat_daemon = is_compat_task();
mutex_init(&sbi->wq_mutex);
mutex_init(&sbi->pipe_mutex);
spin_lock_init(&sbi->fs_lock);
return (bytes > 0);
}
-
+
+/*
+ * The autofs_v5 packet was misdesigned.
+ *
+ * The packets are identical on x86-32 and x86-64, but have different
+ * alignment. Which means that 'sizeof()' will give different results.
+ * Fix it up for the case of running 32-bit user mode on a 64-bit kernel.
+ */
+static noinline size_t autofs_v5_packet_size(struct autofs_sb_info *sbi)
+{
+ size_t pktsz = sizeof(struct autofs_v5_packet);
+#if defined(CONFIG_X86_64) && defined(CONFIG_COMPAT)
+ if (sbi->compat_daemon > 0)
+ pktsz -= 4;
+#endif
+ return pktsz;
+}
+
static void autofs4_notify_daemon(struct autofs_sb_info *sbi,
struct autofs_wait_queue *wq,
int type)
{
struct autofs_v5_packet *packet = &pkt.v5_pkt.v5_packet;
- pktsz = sizeof(*packet);
-
+ pktsz = autofs_v5_packet_size(sbi);
packet->wait_queue_token = wq->wait_queue_token;
packet->len = wq->name.len;
memcpy(packet->name, wq->name.name, wq->name.len);
for (i = 1; i < view->n; ++i) {
const struct user_regset *regset = &view->regsets[i];
do_thread_regset_writeback(t->task, regset);
- if (regset->core_note_type &&
+ if (regset->core_note_type && regset->get &&
(!regset->active || regset->active(t->task, regset))) {
int ret;
size_t size = regset->n * regset->size;
int bio_get_nr_vecs(struct block_device *bdev)
{
struct request_queue *q = bdev_get_queue(bdev);
- int nr_pages;
-
- nr_pages = ((queue_max_sectors(q) << 9) + PAGE_SIZE - 1) >> PAGE_SHIFT;
- if (nr_pages > queue_max_segments(q))
- nr_pages = queue_max_segments(q);
-
- return nr_pages;
+ return min_t(unsigned,
+ queue_max_segments(q),
+ queue_max_sectors(q) / (PAGE_SIZE >> 9) + 1);
}
EXPORT_SYMBOL(bio_get_nr_vecs);
if (eb != eb_in)
free_extent_buffer(eb);
ret = inode_ref_info(parent, 0, fs_root, path, &found_key);
+ if (ret > 0)
+ ret = -ENOENT;
if (ret)
break;
next_inum = found_key.offset;
static int btrfsic_process_superblock(struct btrfsic_state *state,
struct btrfs_fs_devices *fs_devices)
{
- int ret;
+ int ret = 0;
struct btrfs_super_block *selected_super;
struct list_head *dev_head = &fs_devices->devices;
struct btrfs_device *device;
page_offset(bio->bi_io_vec->bv_page),
PAGE_CACHE_SIZE);
read_unlock(&em_tree->lock);
+ if (!em)
+ return -EIO;
compressed_len = em->block_len;
cb = kmalloc(compressed_bio_size(root, compressed_len), GFP_NOFS);
u64 reserved;
struct btrfs_space_info *space_info;
spinlock_t lock;
- unsigned int full:1;
+ unsigned int full;
};
/*
goto fail_sb_buffer;
}
+ if (sectorsize < PAGE_SIZE) {
+ printk(KERN_WARNING "btrfs: Incompatible sector size "
+ "found on %s\n", sb->s_id);
+ goto fail_sb_buffer;
+ }
+
mutex_lock(&fs_info->chunk_mutex);
ret = btrfs_read_sys_array(tree_root);
mutex_unlock(&fs_info->chunk_mutex);
btrfs_close_extra_devices(fs_devices);
+ if (!fs_devices->latest_bdev) {
+ printk(KERN_CRIT "btrfs: failed to read devices on %s\n",
+ sb->s_id);
+ goto fail_tree_roots;
+ }
+
retry_root_backup:
blocksize = btrfs_level_size(tree_root,
btrfs_super_root_level(disk_super));
}
data_sinfo->bytes_may_use += bytes;
trace_btrfs_space_reservation(root->fs_info, "space_info",
- (u64)data_sinfo, bytes, 1);
+ (u64)(unsigned long)data_sinfo,
+ bytes, 1);
spin_unlock(&data_sinfo->lock);
return 0;
spin_lock(&data_sinfo->lock);
data_sinfo->bytes_may_use -= bytes;
trace_btrfs_space_reservation(root->fs_info, "space_info",
- (u64)data_sinfo, bytes, 0);
+ (u64)(unsigned long)data_sinfo,
+ bytes, 0);
spin_unlock(&data_sinfo->lock);
}
if (space_info != delayed_rsv->space_info)
return -ENOSPC;
+ spin_lock(&space_info->lock);
spin_lock(&delayed_rsv->lock);
- if (delayed_rsv->size < bytes) {
+ if (space_info->bytes_pinned + delayed_rsv->size < bytes) {
spin_unlock(&delayed_rsv->lock);
+ spin_unlock(&space_info->lock);
return -ENOSPC;
}
spin_unlock(&delayed_rsv->lock);
+ spin_unlock(&space_info->lock);
commit:
trans = btrfs_join_transaction(root);
if (used + orig_bytes <= space_info->total_bytes) {
space_info->bytes_may_use += orig_bytes;
trace_btrfs_space_reservation(root->fs_info,
- "space_info",
- (u64)space_info,
- orig_bytes, 1);
+ "space_info",
+ (u64)(unsigned long)space_info,
+ orig_bytes, 1);
ret = 0;
} else {
/*
if (used + num_bytes < space_info->total_bytes + avail) {
space_info->bytes_may_use += orig_bytes;
trace_btrfs_space_reservation(root->fs_info,
- "space_info",
- (u64)space_info,
- orig_bytes, 1);
+ "space_info",
+ (u64)(unsigned long)space_info,
+ orig_bytes, 1);
ret = 0;
} else {
wait_ordered = true;
spin_lock(&space_info->lock);
space_info->bytes_may_use -= num_bytes;
trace_btrfs_space_reservation(fs_info, "space_info",
- (u64)space_info,
- num_bytes, 0);
+ (u64)(unsigned long)space_info,
+ num_bytes, 0);
space_info->reservation_progress++;
spin_unlock(&space_info->lock);
}
num_bytes += div64_u64(data_used + meta_used, 50);
if (num_bytes * 3 > meta_used)
- num_bytes = div64_u64(meta_used, 3);
+ num_bytes = div64_u64(meta_used, 3) * 2;
return ALIGN(num_bytes, fs_info->extent_root->leafsize << 10);
}
block_rsv->reserved += num_bytes;
sinfo->bytes_may_use += num_bytes;
trace_btrfs_space_reservation(fs_info, "space_info",
- (u64)sinfo, num_bytes, 1);
+ (u64)(unsigned long)sinfo, num_bytes, 1);
}
if (block_rsv->reserved >= block_rsv->size) {
num_bytes = block_rsv->reserved - block_rsv->size;
sinfo->bytes_may_use -= num_bytes;
trace_btrfs_space_reservation(fs_info, "space_info",
- (u64)sinfo, num_bytes, 0);
+ (u64)(unsigned long)sinfo, num_bytes, 0);
sinfo->reservation_progress++;
block_rsv->reserved = block_rsv->size;
block_rsv->full = 1;
if (!trans->bytes_reserved)
return;
- trace_btrfs_space_reservation(root->fs_info, "transaction", (u64)trans,
+ trace_btrfs_space_reservation(root->fs_info, "transaction",
+ (u64)(unsigned long)trans,
trans->bytes_reserved, 0);
btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
trans->bytes_reserved = 0;
space_info->bytes_reserved += num_bytes;
if (reserve == RESERVE_ALLOC) {
trace_btrfs_space_reservation(cache->fs_info,
- "space_info",
- (u64)space_info,
- num_bytes, 0);
+ "space_info",
+ (u64)(unsigned long)space_info,
+ num_bytes, 0);
space_info->bytes_may_use -= num_bytes;
}
}
u64 start;
u64 end;
u64 trimmed = 0;
+ u64 total_bytes = btrfs_super_total_bytes(fs_info->super_copy);
int ret = 0;
- cache = btrfs_lookup_block_group(fs_info, range->start);
+ /*
+ * try to trim all FS space, our block group may start from non-zero.
+ */
+ if (range->len == total_bytes)
+ cache = btrfs_lookup_first_block_group(fs_info, range->start);
+ else
+ cache = btrfs_lookup_block_group(fs_info, range->start);
while (cache) {
if (cache->key.objectid >= (range->start + range->len)) {
WARN_ON(state->end < start);
last_end = state->end;
+ if (state->end < end && !need_resched())
+ next_node = rb_next(&state->rb_node);
+ else
+ next_node = NULL;
+
+ /* the state doesn't have the wanted bits, go ahead */
+ if (!(state->state & bits))
+ goto next;
+
/*
* | ---- desired range ---- |
* | state | or
goto out;
}
- if (state->end < end && prealloc && !need_resched())
- next_node = rb_next(&state->rb_node);
- else
- next_node = NULL;
-
set |= clear_state_bit(tree, state, &bits, wake);
+next:
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
if (start <= end && next_node) {
state = rb_entry(next_node, struct extent_state,
rb_node);
- if (state->start == start)
- goto hit_next;
+ goto hit_next;
}
goto search_again;
set_state_bits(tree, state, &bits);
clear_state_bit(tree, state, &clear_bits, 0);
-
- merge_state(tree, state);
if (last_end == (u64)-1)
goto out;
if (state->end <= end) {
set_state_bits(tree, state, &bits);
clear_state_bit(tree, state, &clear_bits, 0);
- merge_state(tree, state);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
set_state_bits(tree, prealloc, &bits);
clear_state_bit(tree, prealloc, &clear_bits, 0);
-
- merge_state(tree, prealloc);
prealloc = NULL;
goto out;
}
"this_mirror=%d, num_copies=%d, in_validation=%d\n", read_mode,
failrec->this_mirror, num_copies, failrec->in_validation);
- tree->ops->submit_bio_hook(inode, read_mode, bio, failrec->this_mirror,
- failrec->bio_flags, 0);
- return 0;
+ ret = tree->ops->submit_bio_hook(inode, read_mode, bio,
+ failrec->this_mirror,
+ failrec->bio_flags, 0);
+ return ret;
}
/* lots and lots of room for performance fixes in the end_bio funcs */
+int end_extent_writepage(struct page *page, int err, u64 start, u64 end)
+{
+ int uptodate = (err == 0);
+ struct extent_io_tree *tree;
+ int ret;
+
+ tree = &BTRFS_I(page->mapping->host)->io_tree;
+
+ if (tree->ops && tree->ops->writepage_end_io_hook) {
+ ret = tree->ops->writepage_end_io_hook(page, start,
+ end, NULL, uptodate);
+ if (ret)
+ uptodate = 0;
+ }
+
+ if (!uptodate && tree->ops &&
+ tree->ops->writepage_io_failed_hook) {
+ ret = tree->ops->writepage_io_failed_hook(NULL, page,
+ start, end, NULL);
+ /* Writeback already completed */
+ if (ret == 0)
+ return 1;
+ }
+
+ if (!uptodate) {
+ clear_extent_uptodate(tree, start, end, NULL, GFP_NOFS);
+ ClearPageUptodate(page);
+ SetPageError(page);
+ }
+ return 0;
+}
+
/*
* after a writepage IO is done, we need to:
* clear the uptodate bits on error
*/
static void end_bio_extent_writepage(struct bio *bio, int err)
{
- int uptodate = err == 0;
struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1;
struct extent_io_tree *tree;
u64 start;
u64 end;
int whole_page;
- int ret;
do {
struct page *page = bvec->bv_page;
if (--bvec >= bio->bi_io_vec)
prefetchw(&bvec->bv_page->flags);
- if (tree->ops && tree->ops->writepage_end_io_hook) {
- ret = tree->ops->writepage_end_io_hook(page, start,
- end, NULL, uptodate);
- if (ret)
- uptodate = 0;
- }
-
- if (!uptodate && tree->ops &&
- tree->ops->writepage_io_failed_hook) {
- ret = tree->ops->writepage_io_failed_hook(bio, page,
- start, end, NULL);
- if (ret == 0) {
- uptodate = (err == 0);
- continue;
- }
- }
- if (!uptodate) {
- clear_extent_uptodate(tree, start, end, NULL, GFP_NOFS);
- ClearPageUptodate(page);
- SetPageError(page);
- }
+ if (end_extent_writepage(page, err, start, end))
+ continue;
if (whole_page)
end_page_writeback(page);
delalloc_start = delalloc_end + 1;
continue;
}
- tree->ops->fill_delalloc(inode, page, delalloc_start,
- delalloc_end, &page_started,
- &nr_written);
+ ret = tree->ops->fill_delalloc(inode, page,
+ delalloc_start,
+ delalloc_end,
+ &page_started,
+ &nr_written);
+ BUG_ON(ret);
/*
* delalloc_end is already one less than the total
* length, so we don't subtract one from
if (tree->ops && tree->ops->writepage_start_hook) {
ret = tree->ops->writepage_start_hook(page, start,
page_end);
- if (ret == -EAGAIN) {
- redirty_page_for_writepage(wbc, page);
+ if (ret) {
+ /* Fixup worker will requeue */
+ if (ret == -EBUSY)
+ wbc->pages_skipped++;
+ else
+ redirty_page_for_writepage(wbc, page);
update_nr_written(page, wbc, nr_written);
unlock_page(page);
ret = 0;
len = end - start + 1;
write_lock(&map->lock);
em = lookup_extent_mapping(map, start, len);
- if (IS_ERR_OR_NULL(em)) {
+ if (!em) {
write_unlock(&map->lock);
break;
}
num_pages = num_extent_pages(eb->start, eb->len);
clear_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
- if (eb_straddles_pages(eb)) {
- clear_extent_uptodate(tree, eb->start, eb->start + eb->len - 1,
- cached_state, GFP_NOFS);
- }
+ clear_extent_uptodate(tree, eb->start, eb->start + eb->len - 1,
+ cached_state, GFP_NOFS);
+
for (i = 0; i < num_pages; i++) {
page = extent_buffer_page(eb, i);
if (page)
int repair_io_failure(struct btrfs_mapping_tree *map_tree, u64 start,
u64 length, u64 logical, struct page *page,
int mirror_num);
+int end_extent_writepage(struct page *page, int err, u64 start, u64 end);
#endif
unsigned long flags;
struct block_device *bdev;
atomic_t refs;
- unsigned int in_tree:1;
- unsigned int compress_type:4;
+ unsigned int in_tree;
+ unsigned int compress_type;
};
struct extent_map_tree {
if (mode & ~FALLOC_FL_KEEP_SIZE)
return -EOPNOTSUPP;
+ /*
+ * Make sure we have enough space before we do the
+ * allocation.
+ */
+ ret = btrfs_check_data_free_space(inode, len);
+ if (ret)
+ return ret;
+
/*
* wait for ordered IO before we have any locks. We'll loop again
* below with the locks held.
if (em->block_start == EXTENT_MAP_HOLE ||
(cur_offset >= inode->i_size &&
!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
-
- /*
- * Make sure we have enough space before we do the
- * allocation.
- */
- ret = btrfs_check_data_free_space(inode, last_byte -
- cur_offset);
- if (ret) {
- free_extent_map(em);
- break;
- }
-
ret = btrfs_prealloc_file_range(inode, mode, cur_offset,
last_byte - cur_offset,
1 << inode->i_blkbits,
offset + len,
&alloc_hint);
- /* Let go of our reservation. */
- btrfs_free_reserved_data_space(inode, last_byte -
- cur_offset);
if (ret < 0) {
free_extent_map(em);
break;
&cached_state, GFP_NOFS);
out:
mutex_unlock(&inode->i_mutex);
+ /* Let go of our reservation. */
+ btrfs_free_reserved_data_space(inode, len);
return ret;
}
start - root->sectorsize,
root->sectorsize, 0);
if (IS_ERR(em)) {
- ret = -ENXIO;
+ ret = PTR_ERR(em);
goto out;
}
last_end = em->start + em->len;
while (1) {
em = btrfs_get_extent_fiemap(inode, NULL, 0, start, len, 0);
if (IS_ERR(em)) {
- ret = -ENXIO;
+ ret = PTR_ERR(em);
break;
}
spin_lock(&block_group->lock);
if (block_group->disk_cache_state != BTRFS_DC_WRITTEN) {
spin_unlock(&block_group->lock);
+ btrfs_free_path(path);
goto out;
}
spin_unlock(&block_group->lock);
trans->bytes_reserved);
if (ret)
goto out;
- trace_btrfs_space_reservation(root->fs_info, "ino_cache", (u64)trans,
+ trace_btrfs_space_reservation(root->fs_info, "ino_cache",
+ (u64)(unsigned long)trans,
trans->bytes_reserved, 1);
again:
inode = lookup_free_ino_inode(root, path);
out_put:
iput(inode);
out_release:
- trace_btrfs_space_reservation(root->fs_info, "ino_cache", (u64)trans,
+ trace_btrfs_space_reservation(root->fs_info, "ino_cache",
+ (u64)(unsigned long)trans,
trans->bytes_reserved, 0);
btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
out:
struct inode *inode;
u64 page_start;
u64 page_end;
+ int ret;
fixup = container_of(work, struct btrfs_writepage_fixup, work);
page = fixup->page;
page_end, &cached_state, GFP_NOFS);
unlock_page(page);
btrfs_start_ordered_extent(inode, ordered, 1);
+ btrfs_put_ordered_extent(ordered);
goto again;
}
- BUG();
+ ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE);
+ if (ret) {
+ mapping_set_error(page->mapping, ret);
+ end_extent_writepage(page, ret, page_start, page_end);
+ ClearPageChecked(page);
+ goto out;
+ }
+
btrfs_set_extent_delalloc(inode, page_start, page_end, &cached_state);
ClearPageChecked(page);
+ set_page_dirty(page);
out:
unlock_extent_cached(&BTRFS_I(inode)->io_tree, page_start, page_end,
&cached_state, GFP_NOFS);
fixup->work.func = btrfs_writepage_fixup_worker;
fixup->page = page;
btrfs_queue_worker(&root->fs_info->fixup_workers, &fixup->work);
- return -EAGAIN;
+ return -EBUSY;
}
static int insert_reserved_file_extent(struct btrfs_trans_handle *trans,
ret = btrfs_insert_dir_item(trans, root, name, name_len,
parent_inode, &key,
btrfs_inode_type(inode), index);
- BUG_ON(ret);
+ if (ret)
+ goto fail_dir_item;
btrfs_i_size_write(parent_inode, parent_inode->i_size +
name_len * 2);
ret = btrfs_update_inode(trans, root, parent_inode);
}
return ret;
+
+fail_dir_item:
+ if (unlikely(ino == BTRFS_FIRST_FREE_OBJECTID)) {
+ u64 local_index;
+ int err;
+ err = btrfs_del_root_ref(trans, root->fs_info->tree_root,
+ key.objectid, root->root_key.objectid,
+ parent_ino, &local_index, name, name_len);
+
+ } else if (add_backref) {
+ u64 local_index;
+ int err;
+
+ err = btrfs_del_inode_ref(trans, root, name, name_len,
+ ino, parent_ino, &local_index);
+ }
+ return ret;
}
static int btrfs_add_nondir(struct btrfs_trans_handle *trans,
int err;
u64 index = 0;
- inode = btrfs_new_inode(trans, new_root, NULL, "..", 2, new_dirid,
- new_dirid, S_IFDIR | 0700, &index);
+ inode = btrfs_new_inode(trans, new_root, NULL, "..", 2,
+ new_dirid, new_dirid,
+ S_IFDIR | (~current_umask() & S_IRWXUGO),
+ &index);
if (IS_ERR(inode))
return PTR_ERR(inode);
inode->i_op = &btrfs_dir_inode_operations;
int i_done;
struct btrfs_ordered_extent *ordered;
struct extent_state *cached_state = NULL;
+ struct extent_io_tree *tree;
gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
if (isize == 0)
num_pages << PAGE_CACHE_SHIFT);
if (ret)
return ret;
-again:
- ret = 0;
i_done = 0;
+ tree = &BTRFS_I(inode)->io_tree;
/* step one, lock all the pages */
for (i = 0; i < num_pages; i++) {
struct page *page;
+again:
page = find_or_create_page(inode->i_mapping,
- start_index + i, mask);
+ start_index + i, mask);
if (!page)
break;
+ page_start = page_offset(page);
+ page_end = page_start + PAGE_CACHE_SIZE - 1;
+ while (1) {
+ lock_extent(tree, page_start, page_end, GFP_NOFS);
+ ordered = btrfs_lookup_ordered_extent(inode,
+ page_start);
+ unlock_extent(tree, page_start, page_end, GFP_NOFS);
+ if (!ordered)
+ break;
+
+ unlock_page(page);
+ btrfs_start_ordered_extent(inode, ordered, 1);
+ btrfs_put_ordered_extent(ordered);
+ lock_page(page);
+ }
+
if (!PageUptodate(page)) {
btrfs_readpage(NULL, page);
lock_page(page);
break;
}
}
+
isize = i_size_read(inode);
file_end = (isize - 1) >> PAGE_CACHE_SHIFT;
- if (!isize || page->index > file_end ||
- page->mapping != inode->i_mapping) {
+ if (!isize || page->index > file_end) {
/* whoops, we blew past eof, skip this page */
unlock_page(page);
page_cache_release(page);
break;
}
+
+ if (page->mapping != inode->i_mapping) {
+ unlock_page(page);
+ page_cache_release(page);
+ goto again;
+ }
+
pages[i] = page;
i_done++;
}
lock_extent_bits(&BTRFS_I(inode)->io_tree,
page_start, page_end - 1, 0, &cached_state,
GFP_NOFS);
- ordered = btrfs_lookup_first_ordered_extent(inode, page_end - 1);
- if (ordered &&
- ordered->file_offset + ordered->len > page_start &&
- ordered->file_offset < page_end) {
- btrfs_put_ordered_extent(ordered);
- unlock_extent_cached(&BTRFS_I(inode)->io_tree,
- page_start, page_end - 1,
- &cached_state, GFP_NOFS);
- for (i = 0; i < i_done; i++) {
- unlock_page(pages[i]);
- page_cache_release(pages[i]);
- }
- btrfs_wait_ordered_range(inode, page_start,
- page_end - page_start);
- goto again;
- }
- if (ordered)
- btrfs_put_ordered_extent(ordered);
-
clear_extent_bit(&BTRFS_I(inode)->io_tree, page_start,
page_end - 1, EXTENT_DIRTY | EXTENT_DELALLOC |
EXTENT_DO_ACCOUNTING, 0, 0, &cached_state,
goto out;
}
+ if (name[0] == '.' &&
+ (namelen == 1 || (name[1] == '.' && namelen == 2))) {
+ ret = -EEXIST;
+ goto out;
+ }
+
if (subvol) {
ret = btrfs_mksubvol(&file->f_path, name, namelen,
NULL, transid, readonly);
}
static noinline_for_stack int scrub_chunk(struct scrub_dev *sdev,
- u64 chunk_tree, u64 chunk_objectid, u64 chunk_offset, u64 length)
+ u64 chunk_tree, u64 chunk_objectid, u64 chunk_offset, u64 length,
+ u64 dev_offset)
{
struct btrfs_mapping_tree *map_tree =
&sdev->dev->dev_root->fs_info->mapping_tree;
goto out;
for (i = 0; i < map->num_stripes; ++i) {
- if (map->stripes[i].dev == sdev->dev) {
+ if (map->stripes[i].dev == sdev->dev &&
+ map->stripes[i].physical == dev_offset) {
ret = scrub_stripe(sdev, map, i, chunk_offset, length);
if (ret)
goto out;
break;
}
ret = scrub_chunk(sdev, chunk_tree, chunk_objectid,
- chunk_offset, length);
+ chunk_offset, length, found_key.offset);
btrfs_put_block_group(cache);
if (ret)
break;
if (num_bytes) {
trace_btrfs_space_reservation(root->fs_info, "transaction",
- (u64)h, num_bytes, 1);
+ (u64)(unsigned long)h,
+ num_bytes, 1);
h->block_rsv = &root->fs_info->trans_block_rsv;
h->bytes_reserved = num_bytes;
}
dentry->d_name.name, dentry->d_name.len,
parent_inode, &key,
BTRFS_FT_DIR, index);
- BUG_ON(ret);
+ if (ret) {
+ pending->error = -EEXIST;
+ dput(parent);
+ goto fail;
+ }
btrfs_i_size_write(parent_inode, parent_inode->i_size +
dentry->d_name.len * 2);
{
struct btrfs_pending_snapshot *pending;
struct list_head *head = &trans->transaction->pending_snapshots;
- int ret;
- list_for_each_entry(pending, head, list) {
- ret = create_pending_snapshot(trans, fs_info, pending);
- BUG_ON(ret);
- }
+ list_for_each_entry(pending, head, list)
+ create_pending_snapshot(trans, fs_info, pending);
return 0;
}
{
struct btrfs_device *device, *next;
+ struct block_device *latest_bdev = NULL;
+ u64 latest_devid = 0;
+ u64 latest_transid = 0;
+
mutex_lock(&uuid_mutex);
again:
/* This is the initialized path, it is safe to release the devices. */
list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) {
- if (device->in_fs_metadata)
+ if (device->in_fs_metadata) {
+ if (!latest_transid ||
+ device->generation > latest_transid) {
+ latest_devid = device->devid;
+ latest_transid = device->generation;
+ latest_bdev = device->bdev;
+ }
continue;
+ }
if (device->bdev) {
blkdev_put(device->bdev, device->mode);
goto again;
}
+ fs_devices->latest_bdev = latest_bdev;
+ fs_devices->latest_devid = latest_devid;
+ fs_devices->latest_trans = latest_transid;
+
mutex_unlock(&uuid_mutex);
return 0;
}
em = lookup_extent_mapping(em_tree, chunk_offset, 1);
read_unlock(&em_tree->lock);
- BUG_ON(em->start > chunk_offset ||
+ BUG_ON(!em || em->start > chunk_offset ||
em->start + em->len < chunk_offset);
map = (struct map_lookup *)em->bdev;
return -ENOMEM;
btrfs_set_buffer_uptodate(sb);
btrfs_set_buffer_lockdep_class(root->root_key.objectid, sb, 0);
+ /*
+ * The sb extent buffer is artifical and just used to read the system array.
+ * btrfs_set_buffer_uptodate() call does not properly mark all it's
+ * pages up-to-date when the page is larger: extent does not cover the
+ * whole page and consequently check_page_uptodate does not find all
+ * the page's extents up-to-date (the hole beyond sb),
+ * write_extent_buffer then triggers a WARN_ON.
+ *
+ * Regular short extents go through mark_extent_buffer_dirty/writeback cycle,
+ * but sb spans only this function. Add an explicit SetPageUptodate call
+ * to silence the warning eg. on PowerPC 64.
+ */
+ if (PAGE_CACHE_SIZE > BTRFS_SUPER_INFO_SIZE)
+ SetPageUptodate(sb->first_page);
write_extent_buffer(sb, super_copy, 0, BTRFS_SUPER_INFO_SIZE);
array_size = btrfs_super_sys_array_size(super_copy);
points. If unsure, say N.
config CIFS_FSCACHE
- bool "Provide CIFS client caching support (EXPERIMENTAL)"
+ bool "Provide CIFS client caching support"
depends on CIFS=m && FSCACHE || CIFS=y && FSCACHE=y
help
Makes CIFS FS-Cache capable. Say Y here if you want your CIFS data
manager. If unsure, say N.
config CIFS_ACL
- bool "Provide CIFS ACL support (EXPERIMENTAL)"
+ bool "Provide CIFS ACL support"
depends on CIFS_XATTR && KEYS
help
Allows to fetch CIFS/NTFS ACL from the server. The DACL blob
cifs_dump_mem("Bad SMB: ", buf,
min_t(unsigned int, server->total_read, 48));
- if (mid)
- handle_mid(mid, server, smb_buffer, length);
+ if (!mid)
+ return length;
- return length;
+ handle_mid(mid, server, smb_buffer, length);
+ return 0;
}
static int
down_read(&key->sem);
upayload = key->payload.data;
if (IS_ERR_OR_NULL(upayload)) {
- rc = PTR_ERR(key);
+ rc = upayload ? PTR_ERR(upayload) : -EINVAL;
goto out_key_put;
}
len = delim - payload;
if (len > MAX_USERNAME_SIZE || len <= 0) {
- cFYI(1, "Bad value from username search (len=%ld)", len);
+ cFYI(1, "Bad value from username search (len=%zd)", len);
rc = -EINVAL;
goto out_key_put;
}
vol->username = kstrndup(payload, len, GFP_KERNEL);
if (!vol->username) {
- cFYI(1, "Unable to allocate %ld bytes for username", len);
+ cFYI(1, "Unable to allocate %zd bytes for username", len);
rc = -ENOMEM;
goto out_key_put;
}
len = key->datalen - (len + 1);
if (len > MAX_PASSWORD_SIZE || len <= 0) {
- cFYI(1, "Bad len for password search (len=%ld)", len);
+ cFYI(1, "Bad len for password search (len=%zd)", len);
rc = -EINVAL;
kfree(vol->username);
vol->username = NULL;
++delim;
vol->password = kstrndup(delim, len, GFP_KERNEL);
if (!vol->password) {
- cFYI(1, "Unable to allocate %ld bytes for password", len);
+ cFYI(1, "Unable to allocate %zd bytes for password", len);
rc = -ENOMEM;
kfree(vol->username);
vol->username = NULL;
struct smb_vol *vol_info;
vol_info = kzalloc(sizeof(*vol_info), GFP_KERNEL);
- if (vol_info == NULL) {
- tcon = ERR_PTR(-ENOMEM);
- goto out;
- }
+ if (vol_info == NULL)
+ return ERR_PTR(-ENOMEM);
vol_info->local_nls = cifs_sb->local_nls;
vol_info->linux_uid = fsuid;
{
int xid;
int rc = 0; /* to get around spurious gcc warning, set to zero here */
- __u32 oplock = 0;
+ __u32 oplock = enable_oplocks ? REQ_OPLOCK : 0;
__u16 fileHandle = 0;
bool posix_open = false;
struct cifs_sb_info *cifs_sb;
/* copy user */
/* BB what about null user mounts - check that we do this BB */
/* copy user */
- if (ses->user_name != NULL)
+ if (ses->user_name != NULL) {
strncpy(bcc_ptr, ses->user_name, MAX_USERNAME_SIZE);
+ bcc_ptr += strnlen(ses->user_name, MAX_USERNAME_SIZE);
+ }
/* else null user mount */
-
- bcc_ptr += strnlen(ses->user_name, MAX_USERNAME_SIZE);
*bcc_ptr = 0;
bcc_ptr++; /* account for null termination */
/* copy domain */
-
if (ses->domainName != NULL) {
strncpy(bcc_ptr, ses->domainName, 256);
bcc_ptr += strnlen(ses->domainName, 256);
ses->ntlmssp->server_flags = le32_to_cpu(pblob->NegotiateFlags);
tioffset = le32_to_cpu(pblob->TargetInfoArray.BufferOffset);
tilen = le16_to_cpu(pblob->TargetInfoArray.Length);
+ if (tioffset > blob_len || tioffset + tilen > blob_len) {
+ cERROR(1, "tioffset + tilen too high %u + %u", tioffset, tilen);
+ return -EINVAL;
+ }
if (tilen) {
ses->auth_key.response = kmalloc(tilen, GFP_KERNEL);
if (!ses->auth_key.response) {
static int cp_compat_stat(struct kstat *stat, struct compat_stat __user *ubuf)
{
- compat_ino_t ino = stat->ino;
- typeof(ubuf->st_uid) uid = 0;
- typeof(ubuf->st_gid) gid = 0;
- int err;
+ struct compat_stat tmp;
- SET_UID(uid, stat->uid);
- SET_GID(gid, stat->gid);
+ if (!old_valid_dev(stat->dev) || !old_valid_dev(stat->rdev))
+ return -EOVERFLOW;
- if ((u64) stat->size > MAX_NON_LFS ||
- !old_valid_dev(stat->dev) ||
- !old_valid_dev(stat->rdev))
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.st_dev = old_encode_dev(stat->dev);
+ tmp.st_ino = stat->ino;
+ if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino)
return -EOVERFLOW;
- if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino)
+ tmp.st_mode = stat->mode;
+ tmp.st_nlink = stat->nlink;
+ if (tmp.st_nlink != stat->nlink)
return -EOVERFLOW;
-
- if (clear_user(ubuf, sizeof(*ubuf)))
- return -EFAULT;
-
- err = __put_user(old_encode_dev(stat->dev), &ubuf->st_dev);
- err |= __put_user(ino, &ubuf->st_ino);
- err |= __put_user(stat->mode, &ubuf->st_mode);
- err |= __put_user(stat->nlink, &ubuf->st_nlink);
- err |= __put_user(uid, &ubuf->st_uid);
- err |= __put_user(gid, &ubuf->st_gid);
- err |= __put_user(old_encode_dev(stat->rdev), &ubuf->st_rdev);
- err |= __put_user(stat->size, &ubuf->st_size);
- err |= __put_user(stat->atime.tv_sec, &ubuf->st_atime);
- err |= __put_user(stat->atime.tv_nsec, &ubuf->st_atime_nsec);
- err |= __put_user(stat->mtime.tv_sec, &ubuf->st_mtime);
- err |= __put_user(stat->mtime.tv_nsec, &ubuf->st_mtime_nsec);
- err |= __put_user(stat->ctime.tv_sec, &ubuf->st_ctime);
- err |= __put_user(stat->ctime.tv_nsec, &ubuf->st_ctime_nsec);
- err |= __put_user(stat->blksize, &ubuf->st_blksize);
- err |= __put_user(stat->blocks, &ubuf->st_blocks);
- return err;
+ SET_UID(tmp.st_uid, stat->uid);
+ SET_GID(tmp.st_gid, stat->gid);
+ tmp.st_rdev = old_encode_dev(stat->rdev);
+ if ((u64) stat->size > MAX_NON_LFS)
+ return -EOVERFLOW;
+ tmp.st_size = stat->size;
+ tmp.st_atime = stat->atime.tv_sec;
+ tmp.st_atime_nsec = stat->atime.tv_nsec;
+ tmp.st_mtime = stat->mtime.tv_sec;
+ tmp.st_mtime_nsec = stat->mtime.tv_nsec;
+ tmp.st_ctime = stat->ctime.tv_sec;
+ tmp.st_ctime_nsec = stat->ctime.tv_nsec;
+ tmp.st_blocks = stat->blocks;
+ tmp.st_blksize = stat->blksize;
+ return copy_to_user(ubuf, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
asmlinkage long compat_sys_newstat(const char __user * filename,
static struct hlist_bl_head *dentry_hashtable __read_mostly;
-static inline struct hlist_bl_head *d_hash(struct dentry *parent,
+static inline struct hlist_bl_head *d_hash(const struct dentry *parent,
unsigned long hash)
{
hash += ((unsigned long) parent ^ GOLDEN_RATIO_PRIME) / L1_CACHE_BYTES;
}
#endif
+/*
+ * Compare 2 name strings, return 0 if they match, otherwise non-zero.
+ * The strings are both count bytes long, and count is non-zero.
+ */
+static inline int dentry_cmp(const unsigned char *cs, size_t scount,
+ const unsigned char *ct, size_t tcount)
+{
+ if (scount != tcount)
+ return 1;
+
+ do {
+ if (*cs != *ct)
+ return 1;
+ cs++;
+ ct++;
+ tcount--;
+ } while (tcount);
+ return 0;
+}
+
static void __d_free(struct rcu_head *head)
{
struct dentry *dentry = container_of(head, struct dentry, d_u.d_rcu);
* child is looked up. Thus, an interlocking stepping of sequence lock checks
* is formed, giving integrity down the path walk.
*/
-struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name,
- unsigned *seq, struct inode **inode)
+struct dentry *__d_lookup_rcu(const struct dentry *parent,
+ const struct qstr *name,
+ unsigned *seqp, struct inode **inode)
{
unsigned int len = name->len;
unsigned int hash = name->hash;
* See Documentation/filesystems/path-lookup.txt for more details.
*/
hlist_bl_for_each_entry_rcu(dentry, node, b, d_hash) {
+ unsigned seq;
struct inode *i;
const char *tname;
int tlen;
continue;
seqretry:
- *seq = read_seqcount_begin(&dentry->d_seq);
+ seq = read_seqcount_begin(&dentry->d_seq);
if (dentry->d_parent != parent)
continue;
if (d_unhashed(dentry))
* edge of memory when walking. If we could load this
* atomically some other way, we could drop this check.
*/
- if (read_seqcount_retry(&dentry->d_seq, *seq))
+ if (read_seqcount_retry(&dentry->d_seq, seq))
goto seqretry;
if (unlikely(parent->d_flags & DCACHE_OP_COMPARE)) {
if (parent->d_op->d_compare(parent, *inode,
* order to do anything useful with the returned dentry
* anyway.
*/
+ *seqp = seq;
*inode = i;
return dentry;
}
static void __init dcache_init_early(void)
{
- int loop;
+ unsigned int loop;
/* If hashes are distributed across NUMA nodes, defer
* hash allocation until vmalloc space is available.
&d_hash_mask,
0);
- for (loop = 0; loop < (1 << d_hash_shift); loop++)
+ for (loop = 0; loop < (1U << d_hash_shift); loop++)
INIT_HLIST_BL_HEAD(dentry_hashtable + loop);
}
static void __init dcache_init(void)
{
- int loop;
+ unsigned int loop;
/*
* A constructor could be added for stable state like the lists,
&d_hash_mask,
0);
- for (loop = 0; loop < (1 << d_hash_shift); loop++)
+ for (loop = 0; loop < (1U << d_hash_shift); loop++)
INIT_HLIST_BL_HEAD(dentry_hashtable + loop);
}
if (atomic_read(&inode->i_dio_count))
__inode_dio_wait(inode);
}
-EXPORT_SYMBOL_GPL(inode_dio_wait);
+EXPORT_SYMBOL(inode_dio_wait);
/*
* inode_dio_done - signal finish of a direct I/O requests
if (atomic_dec_and_test(&inode->i_dio_count))
wake_up_bit(&inode->i_state, __I_DIO_WAKEUP);
}
-EXPORT_SYMBOL_GPL(inode_dio_done);
+EXPORT_SYMBOL(inode_dio_done);
/*
* How many pages are in the queue?
return;
}
+static size_t ecryptfs_max_decoded_size(size_t encoded_size)
+{
+ /* Not exact; conservatively long. Every block of 4
+ * encoded characters decodes into a block of 3
+ * decoded characters. This segment of code provides
+ * the caller with the maximum amount of allocated
+ * space that @dst will need to point to in a
+ * subsequent call. */
+ return ((encoded_size + 1) * 3) / 4;
+}
+
/**
* ecryptfs_decode_from_filename
* @dst: If NULL, this function only sets @dst_size and returns. If
size_t dst_byte_offset = 0;
if (dst == NULL) {
- /* Not exact; conservatively long. Every block of 4
- * encoded characters decodes into a block of 3
- * decoded characters. This segment of code provides
- * the caller with the maximum amount of allocated
- * space that @dst will need to point to in a
- * subsequent call. */
- (*dst_size) = (((src_size + 1) * 3) / 4);
+ (*dst_size) = ecryptfs_max_decoded_size(src_size);
goto out;
}
while (src_byte_offset < src_size) {
out:
return rc;
}
+
+#define ENC_NAME_MAX_BLOCKLEN_8_OR_16 143
+
+int ecryptfs_set_f_namelen(long *namelen, long lower_namelen,
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat)
+{
+ struct blkcipher_desc desc;
+ struct mutex *tfm_mutex;
+ size_t cipher_blocksize;
+ int rc;
+
+ if (!(mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)) {
+ (*namelen) = lower_namelen;
+ return 0;
+ }
+
+ rc = ecryptfs_get_tfm_and_mutex_for_cipher_name(&desc.tfm, &tfm_mutex,
+ mount_crypt_stat->global_default_fn_cipher_name);
+ if (unlikely(rc)) {
+ (*namelen) = 0;
+ return rc;
+ }
+
+ mutex_lock(tfm_mutex);
+ cipher_blocksize = crypto_blkcipher_blocksize(desc.tfm);
+ mutex_unlock(tfm_mutex);
+
+ /* Return an exact amount for the common cases */
+ if (lower_namelen == NAME_MAX
+ && (cipher_blocksize == 8 || cipher_blocksize == 16)) {
+ (*namelen) = ENC_NAME_MAX_BLOCKLEN_8_OR_16;
+ return 0;
+ }
+
+ /* Return a safe estimate for the uncommon cases */
+ (*namelen) = lower_namelen;
+ (*namelen) -= ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE;
+ /* Since this is the max decoded size, subtract 1 "decoded block" len */
+ (*namelen) = ecryptfs_max_decoded_size(*namelen) - 3;
+ (*namelen) -= ECRYPTFS_TAG_70_MAX_METADATA_SIZE;
+ (*namelen) -= ECRYPTFS_FILENAME_MIN_RANDOM_PREPEND_BYTES;
+ /* Worst case is that the filename is padded nearly a full block size */
+ (*namelen) -= cipher_blocksize - 1;
+
+ if ((*namelen) < 0)
+ (*namelen) = 0;
+
+ return 0;
+}
#define ECRYPTFS_NON_NULL 0x42 /* A reasonable substitute for NULL */
#define MD5_DIGEST_SIZE 16
#define ECRYPTFS_TAG_70_DIGEST_SIZE MD5_DIGEST_SIZE
+#define ECRYPTFS_TAG_70_MIN_METADATA_SIZE (1 + ECRYPTFS_MIN_PKT_LEN_SIZE \
+ + ECRYPTFS_SIG_SIZE + 1 + 1)
+#define ECRYPTFS_TAG_70_MAX_METADATA_SIZE (1 + ECRYPTFS_MAX_PKT_LEN_SIZE \
+ + ECRYPTFS_SIG_SIZE + 1 + 1)
#define ECRYPTFS_FEK_ENCRYPTED_FILENAME_PREFIX "ECRYPTFS_FEK_ENCRYPTED."
#define ECRYPTFS_FEK_ENCRYPTED_FILENAME_PREFIX_SIZE 23
#define ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX "ECRYPTFS_FNEK_ENCRYPTED."
size_t *packet_size,
struct ecryptfs_mount_crypt_stat *mount_crypt_stat,
char *data, size_t max_packet_size);
+int ecryptfs_set_f_namelen(long *namelen, long lower_namelen,
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat);
int ecryptfs_derive_iv(char *iv, struct ecryptfs_crypt_stat *crypt_stat,
loff_t offset);
}
rc = vfs_setxattr(lower_dentry, name, value, size, flags);
+ if (!rc)
+ fsstack_copy_attr_all(dentry->d_inode, lower_dentry->d_inode);
out:
return rc;
}
* Octets N3-N4: Block-aligned encrypted filename
* - Consists of a minimum number of random characters, a \0
* separator, and then the filename */
- s->max_packet_size = (1 /* Tag 70 identifier */
- + 3 /* Max Tag 70 packet size */
- + ECRYPTFS_SIG_SIZE /* FNEK sig */
- + 1 /* Cipher identifier */
+ s->max_packet_size = (ECRYPTFS_TAG_70_MAX_METADATA_SIZE
+ s->block_aligned_filename_size);
if (dest == NULL) {
(*packet_size) = s->max_packet_size;
goto out;
}
s->desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP;
- if (max_packet_size < (1 + 1 + ECRYPTFS_SIG_SIZE + 1 + 1)) {
+ if (max_packet_size < ECRYPTFS_TAG_70_MIN_METADATA_SIZE) {
printk(KERN_WARNING "%s: max_packet_size is [%zd]; it must be "
"at least [%d]\n", __func__, max_packet_size,
- (1 + 1 + ECRYPTFS_SIG_SIZE + 1 + 1));
+ ECRYPTFS_TAG_70_MIN_METADATA_SIZE);
rc = -EINVAL;
goto out;
}
goto memdup;
} else if (count < MIN_MSG_PKT_SIZE || count > MAX_MSG_PKT_SIZE) {
printk(KERN_WARNING "%s: Acceptable packet size range is "
- "[%d-%lu], but amount of data written is [%zu].",
+ "[%d-%zu], but amount of data written is [%zu].",
__func__, MIN_MSG_PKT_SIZE, MAX_MSG_PKT_SIZE, count);
return -EINVAL;
}
/* This is a header extent */
char *page_virt;
- page_virt = kmap_atomic(page, KM_USER0);
+ page_virt = kmap_atomic(page);
memset(page_virt, 0, PAGE_CACHE_SIZE);
/* TODO: Support more than one header extent */
if (view_extent_num == 0) {
crypt_stat,
&written);
}
- kunmap_atomic(page_virt, KM_USER0);
+ kunmap_atomic(page_virt);
flush_dcache_page(page);
if (rc) {
printk(KERN_ERR "%s: Error reading xattr "
ecryptfs_page_idx, rc);
goto out;
}
- ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0);
+ ecryptfs_page_virt = kmap_atomic(ecryptfs_page);
/*
* pos: where we're now writing, offset: where the request was
(data + data_offset), num_bytes);
data_offset += num_bytes;
}
- kunmap_atomic(ecryptfs_page_virt, KM_USER0);
+ kunmap_atomic(ecryptfs_page_virt);
flush_dcache_page(ecryptfs_page);
SetPageUptodate(ecryptfs_page);
unlock_page(ecryptfs_page);
#include <linux/seq_file.h>
#include <linux/file.h>
#include <linux/crypto.h>
+#include <linux/statfs.h>
+#include <linux/magic.h>
#include "ecryptfs_kernel.h"
struct kmem_cache *ecryptfs_inode_info_cache;
static int ecryptfs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
+ int rc;
if (!lower_dentry->d_sb->s_op->statfs)
return -ENOSYS;
- return lower_dentry->d_sb->s_op->statfs(lower_dentry, buf);
+
+ rc = lower_dentry->d_sb->s_op->statfs(lower_dentry, buf);
+ if (rc)
+ return rc;
+
+ buf->f_type = ECRYPTFS_SUPER_MAGIC;
+ rc = ecryptfs_set_f_namelen(&buf->f_namelen, buf->f_namelen,
+ &ecryptfs_superblock_to_private(dentry->d_sb)->mount_crypt_stat);
+
+ return rc;
}
/**
return !list_empty(p);
}
+static inline struct eppoll_entry *ep_pwq_from_wait(wait_queue_t *p)
+{
+ return container_of(p, struct eppoll_entry, wait);
+}
+
/* Get the "struct epitem" from a wait queue pointer */
static inline struct epitem *ep_item_from_wait(wait_queue_t *p)
{
put_cpu();
}
+static void ep_remove_wait_queue(struct eppoll_entry *pwq)
+{
+ wait_queue_head_t *whead;
+
+ rcu_read_lock();
+ /* If it is cleared by POLLFREE, it should be rcu-safe */
+ whead = rcu_dereference(pwq->whead);
+ if (whead)
+ remove_wait_queue(whead, &pwq->wait);
+ rcu_read_unlock();
+}
+
/*
* This function unregisters poll callbacks from the associated file
* descriptor. Must be called with "mtx" held (or "epmutex" if called from
pwq = list_first_entry(lsthead, struct eppoll_entry, llink);
list_del(&pwq->llink);
- remove_wait_queue(pwq->whead, &pwq->wait);
+ ep_remove_wait_queue(pwq);
kmem_cache_free(pwq_cache, pwq);
}
}
struct epitem *epi = ep_item_from_wait(wait);
struct eventpoll *ep = epi->ep;
+ if ((unsigned long)key & POLLFREE) {
+ ep_pwq_from_wait(wait)->whead = NULL;
+ /*
+ * whead = NULL above can race with ep_remove_wait_queue()
+ * which can do another remove_wait_queue() after us, so we
+ * can't use __remove_wait_queue(). whead->lock is held by
+ * the caller.
+ */
+ list_del_init(&wait->task_list);
+ }
+
spin_lock_irqsave(&ep->lock, flags);
/*
perf_event_comm(tsk);
}
+static void filename_to_taskname(char *tcomm, const char *fn, unsigned int len)
+{
+ int i, ch;
+
+ /* Copies the binary name from after last slash */
+ for (i = 0; (ch = *(fn++)) != '\0';) {
+ if (ch == '/')
+ i = 0; /* overwrite what we wrote */
+ else
+ if (i < len - 1)
+ tcomm[i++] = ch;
+ }
+ tcomm[i] = '\0';
+}
+
int flush_old_exec(struct linux_binprm * bprm)
{
int retval;
set_mm_exe_file(bprm->mm, bprm->file);
+ filename_to_taskname(bprm->tcomm, bprm->filename, sizeof(bprm->tcomm));
/*
* Release all of the old mmap stuff
*/
void setup_new_exec(struct linux_binprm * bprm)
{
- int i, ch;
- const char *name;
- char tcomm[sizeof(current->comm)];
-
arch_pick_mmap_layout(current->mm);
/* This is the point of no return */
else
set_dumpable(current->mm, suid_dumpable);
- name = bprm->filename;
-
- /* Copies the binary name from after last slash */
- for (i=0; (ch = *(name++)) != '\0';) {
- if (ch == '/')
- i = 0; /* overwrite what we wrote */
- else
- if (i < (sizeof(tcomm) - 1))
- tcomm[i++] = ch;
- }
- tcomm[i] = '\0';
- set_task_comm(current, tcomm);
+ set_task_comm(current, bprm->tcomm);
/* Set the new mm task size. We have to do that late because it may
* depend on TIF_32BIT which is only updated in flush_thread() on
struct completion *done; /* set if the caller waits */
};
-/*
- * Include the creation of the trace points after defining the
- * wb_writeback_work structure so that the definition remains local to this
- * file.
- */
-#define CREATE_TRACE_POINTS
-#include <trace/events/writeback.h>
-
/*
* We don't actually have pdflush, but this one is exported though /proc...
*/
return list_entry(head, struct inode, i_wb_list);
}
+/*
+ * Include the creation of the trace points after defining the
+ * wb_writeback_work structure and inline functions so that the definition
+ * remains local to this file.
+ */
+#define CREATE_TRACE_POINTS
+#include <trace/events/writeback.h>
+
/* Wakeup flusher thread or forker thread to fork it. Requires bdi->wb_lock. */
static void bdi_wakeup_flusher(struct backing_dev_info *bdi)
{
spin_unlock(&lru_lock);
}
-static void gfs2_glock_remove_from_lru(struct gfs2_glock *gl)
+static void __gfs2_glock_remove_from_lru(struct gfs2_glock *gl)
{
- spin_lock(&lru_lock);
if (!list_empty(&gl->gl_lru)) {
list_del_init(&gl->gl_lru);
atomic_dec(&lru_count);
clear_bit(GLF_LRU, &gl->gl_flags);
}
+}
+
+static void gfs2_glock_remove_from_lru(struct gfs2_glock *gl)
+{
+ spin_lock(&lru_lock);
+ __gfs2_glock_remove_from_lru(gl);
spin_unlock(&lru_lock);
}
struct gfs2_sbd *sdp = gl->gl_sbd;
struct address_space *mapping = gfs2_glock2aspace(gl);
- if (atomic_dec_and_test(&gl->gl_ref)) {
+ if (atomic_dec_and_lock(&gl->gl_ref, &lru_lock)) {
+ __gfs2_glock_remove_from_lru(gl);
+ spin_unlock(&lru_lock);
spin_lock_bucket(gl->gl_hash);
hlist_bl_del_rcu(&gl->gl_list);
spin_unlock_bucket(gl->gl_hash);
- gfs2_glock_remove_from_lru(gl);
GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders));
GLOCK_BUG_ON(gl, mapping && mapping->nrpages);
trace_gfs2_glock_put(gl);
int error;
int dblocks = 1;
- error = gfs2_rindex_update(sdp);
- if (error)
- fs_warn(sdp, "rindex update returns %d\n", error);
-
error = gfs2_inplace_reserve(dip, RES_DINODE);
if (error)
goto out;
rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
if (!rgd)
goto out_inodes;
+
gfs2_holder_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + 2);
fs_err(sdp, "can't get quota file inode: %d\n", error);
goto fail_rindex;
}
+
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ goto fail_qinode;
+
return 0;
fail_qinode:
struct gfs2_glock *gl = ip->i_gl;
struct gfs2_holder ri_gh;
int error = 0;
+ int unlock_required = 0;
/* Read new copy from disk if we don't have the latest */
if (!sdp->sd_rindex_uptodate) {
mutex_lock(&sdp->sd_rindex_mutex);
- error = gfs2_glock_nq_init(gl, LM_ST_SHARED, 0, &ri_gh);
- if (error)
- return error;
+ if (!gfs2_glock_is_locked_by_me(gl)) {
+ error = gfs2_glock_nq_init(gl, LM_ST_SHARED, 0, &ri_gh);
+ if (error)
+ return error;
+ unlock_required = 1;
+ }
if (!sdp->sd_rindex_uptodate)
error = gfs2_ri_update(ip);
- gfs2_glock_dq_uninit(&ri_gh);
+ if (unlock_required)
+ gfs2_glock_dq_uninit(&ri_gh);
mutex_unlock(&sdp->sd_rindex_mutex);
}
*/
void __init inode_init_early(void)
{
- int loop;
+ unsigned int loop;
/* If hashes are distributed across NUMA nodes, defer
* hash allocation until vmalloc space is available.
&i_hash_mask,
0);
- for (loop = 0; loop < (1 << i_hash_shift); loop++)
+ for (loop = 0; loop < (1U << i_hash_shift); loop++)
INIT_HLIST_HEAD(&inode_hashtable[loop]);
}
void __init inode_init(void)
{
- int loop;
+ unsigned int loop;
/* inode slab cache */
inode_cachep = kmem_cache_create("inode_cache",
&i_hash_mask,
0);
- for (loop = 0; loop < (1 << i_hash_shift); loop++)
+ for (loop = 0; loop < (1U << i_hash_shift); loop++)
INIT_HLIST_HEAD(&inode_hashtable[loop]);
}
ioc = get_task_io_context(task, GFP_ATOMIC, NUMA_NO_NODE);
if (ioc) {
ioc_ioprio_changed(ioc, ioprio);
- put_io_context(ioc, NULL);
+ put_io_context(ioc);
}
return err;
void *ebuf;
uint32_t ofs;
size_t retlen;
- int ret = -EIO;
+ int ret;
unsigned long *wordebuf;
ret = mtd_point(c->mtd, jeb->offset, c->sector_size, &retlen,
struct dentry *old;
/* Don't create child dentry for a dead directory. */
- if (unlikely(IS_DEADDIR(inode)))
+ if (unlikely(IS_DEADDIR(inode))) {
+ dput(dentry);
return ERR_PTR(-ENOENT);
+ }
old = inode->i_op->lookup(inode, dentry, nd);
if (unlikely(old)) {
return 1;
}
+unsigned int full_name_hash(const unsigned char *name, unsigned int len)
+{
+ unsigned long hash = init_name_hash();
+ while (len--)
+ hash = partial_name_hash(*name++, hash);
+ return end_name_hash(hash);
+}
+EXPORT_SYMBOL(full_name_hash);
+
+/*
+ * We know there's a real path component here of at least
+ * one character.
+ */
+static inline unsigned long hash_name(const char *name, unsigned int *hashp)
+{
+ unsigned long hash = init_name_hash();
+ unsigned long len = 0, c;
+
+ c = (unsigned char)*name;
+ do {
+ len++;
+ hash = partial_name_hash(c, hash);
+ c = (unsigned char)name[len];
+ } while (c && c != '/');
+ *hashp = end_name_hash(hash);
+ return len;
+}
+
/*
* Name resolution.
* This is the basic name resolution function, turning a pathname into
/* At this point we know we have a real path component. */
for(;;) {
- unsigned long hash;
struct qstr this;
- unsigned int c;
+ long len;
int type;
err = may_lookup(nd);
if (err)
break;
+ len = hash_name(name, &this.hash);
this.name = name;
- c = *(const unsigned char *)name;
-
- hash = init_name_hash();
- do {
- name++;
- hash = partial_name_hash(c, hash);
- c = *(const unsigned char *)name;
- } while (c && (c != '/'));
- this.len = name - (const char *) this.name;
- this.hash = end_name_hash(hash);
+ this.len = len;
type = LAST_NORM;
- if (this.name[0] == '.') switch (this.len) {
+ if (name[0] == '.') switch (len) {
case 2:
- if (this.name[1] == '.') {
+ if (name[1] == '.') {
type = LAST_DOTDOT;
nd->flags |= LOOKUP_JUMPED;
}
}
}
- /* remove trailing slashes? */
- if (!c)
+ if (!name[len])
goto last_component;
- while (*++name == '/');
- if (!*name)
+ /*
+ * If it wasn't NUL, we know it was '/'. Skip that
+ * slash, and continue until no more slashes.
+ */
+ do {
+ len++;
+ } while (unlikely(name[len] == '/'));
+ if (!name[len])
goto last_component;
+ name += len;
err = walk_component(nd, &next, &this, type, LOOKUP_FOLLOW);
if (err < 0)
struct dentry *lookup_one_len(const char *name, struct dentry *base, int len)
{
struct qstr this;
- unsigned long hash;
unsigned int c;
WARN_ON_ONCE(!mutex_is_locked(&base->d_inode->i_mutex));
this.name = name;
this.len = len;
+ this.hash = full_name_hash(name, len);
if (!len)
return ERR_PTR(-EACCES);
- hash = init_name_hash();
while (len--) {
c = *(const unsigned char *)name++;
if (c == '/' || c == '\0')
return ERR_PTR(-EACCES);
- hash = partial_name_hash(c, hash);
}
- this.hash = end_name_hash(hash);
/*
* See if the low-level filesystem might want
* to use its own hash..
}
if (npages > 1) {
/* for decoding across pages */
- args.acl_scratch = alloc_page(GFP_KERNEL);
- if (!args.acl_scratch)
+ res.acl_scratch = alloc_page(GFP_KERNEL);
+ if (!res.acl_scratch)
goto out_free;
}
args.acl_len = npages * PAGE_SIZE;
for (i = 0; i < npages; i++)
if (pages[i])
__free_page(pages[i]);
- if (args.acl_scratch)
- __free_page(args.acl_scratch);
+ if (res.acl_scratch)
+ __free_page(res.acl_scratch);
return ret;
}
clp->cl_rpcclient->cl_auth->au_flavor);
res.server_scope = kzalloc(sizeof(struct server_scope), GFP_KERNEL);
- if (unlikely(!res.server_scope))
- return -ENOMEM;
+ if (unlikely(!res.server_scope)) {
+ status = -ENOMEM;
+ goto out;
+ }
status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
if (!status)
clp->server_scope = NULL;
}
- if (!clp->server_scope)
+ if (!clp->server_scope) {
clp->server_scope = res.server_scope;
- else
- kfree(res.server_scope);
+ goto out;
+ }
}
-
+ kfree(res.server_scope);
+out:
dprintk("<-- %s status= %d\n", __func__, status);
return status;
}
return status;
}
+static struct nfs4_slot *nfs4_alloc_slots(u32 max_slots, gfp_t gfp_flags)
+{
+ return kcalloc(max_slots, sizeof(struct nfs4_slot), gfp_flags);
+}
+
+static void nfs4_add_and_init_slots(struct nfs4_slot_table *tbl,
+ struct nfs4_slot *new,
+ u32 max_slots,
+ u32 ivalue)
+{
+ struct nfs4_slot *old = NULL;
+ u32 i;
+
+ spin_lock(&tbl->slot_tbl_lock);
+ if (new) {
+ old = tbl->slots;
+ tbl->slots = new;
+ tbl->max_slots = max_slots;
+ }
+ tbl->highest_used_slotid = -1; /* no slot is currently used */
+ for (i = 0; i < tbl->max_slots; i++)
+ tbl->slots[i].seq_nr = ivalue;
+ spin_unlock(&tbl->slot_tbl_lock);
+ kfree(old);
+}
+
/*
- * Reset a slot table
+ * (re)Initialise a slot table
*/
-static int nfs4_reset_slot_table(struct nfs4_slot_table *tbl, u32 max_reqs,
- int ivalue)
+static int nfs4_realloc_slot_table(struct nfs4_slot_table *tbl, u32 max_reqs,
+ u32 ivalue)
{
struct nfs4_slot *new = NULL;
- int i;
- int ret = 0;
+ int ret = -ENOMEM;
dprintk("--> %s: max_reqs=%u, tbl->max_slots %d\n", __func__,
max_reqs, tbl->max_slots);
/* Does the newly negotiated max_reqs match the existing slot table? */
if (max_reqs != tbl->max_slots) {
- ret = -ENOMEM;
- new = kmalloc(max_reqs * sizeof(struct nfs4_slot),
- GFP_NOFS);
+ new = nfs4_alloc_slots(max_reqs, GFP_NOFS);
if (!new)
goto out;
- ret = 0;
- kfree(tbl->slots);
}
- spin_lock(&tbl->slot_tbl_lock);
- if (new) {
- tbl->slots = new;
- tbl->max_slots = max_reqs;
- }
- for (i = 0; i < tbl->max_slots; ++i)
- tbl->slots[i].seq_nr = ivalue;
- spin_unlock(&tbl->slot_tbl_lock);
+ ret = 0;
+
+ nfs4_add_and_init_slots(tbl, new, max_reqs, ivalue);
dprintk("%s: tbl=%p slots=%p max_slots=%d\n", __func__,
tbl, tbl->slots, tbl->max_slots);
out:
return;
}
-/*
- * Initialize slot table
- */
-static int nfs4_init_slot_table(struct nfs4_slot_table *tbl,
- int max_slots, int ivalue)
-{
- struct nfs4_slot *slot;
- int ret = -ENOMEM;
-
- BUG_ON(max_slots > NFS4_MAX_SLOT_TABLE);
-
- dprintk("--> %s: max_reqs=%u\n", __func__, max_slots);
-
- slot = kcalloc(max_slots, sizeof(struct nfs4_slot), GFP_NOFS);
- if (!slot)
- goto out;
- ret = 0;
-
- spin_lock(&tbl->slot_tbl_lock);
- tbl->max_slots = max_slots;
- tbl->slots = slot;
- tbl->highest_used_slotid = -1; /* no slot is currently used */
- spin_unlock(&tbl->slot_tbl_lock);
- dprintk("%s: tbl=%p slots=%p max_slots=%d\n", __func__,
- tbl, tbl->slots, tbl->max_slots);
-out:
- dprintk("<-- %s: return %d\n", __func__, ret);
- return ret;
-}
-
/*
* Initialize or reset the forechannel and backchannel tables
*/
dprintk("--> %s\n", __func__);
/* Fore channel */
tbl = &ses->fc_slot_table;
- if (tbl->slots == NULL) {
- status = nfs4_init_slot_table(tbl, ses->fc_attrs.max_reqs, 1);
- if (status) /* -ENOMEM */
- return status;
- } else {
- status = nfs4_reset_slot_table(tbl, ses->fc_attrs.max_reqs, 1);
- if (status)
- return status;
- }
+ status = nfs4_realloc_slot_table(tbl, ses->fc_attrs.max_reqs, 1);
+ if (status) /* -ENOMEM */
+ return status;
/* Back channel */
tbl = &ses->bc_slot_table;
- if (tbl->slots == NULL) {
- status = nfs4_init_slot_table(tbl, ses->bc_attrs.max_reqs, 0);
- if (status)
- /* Fore and back channel share a connection so get
- * both slot tables or neither */
- nfs4_destroy_slot_tables(ses);
- } else
- status = nfs4_reset_slot_table(tbl, ses->bc_attrs.max_reqs, 0);
+ status = nfs4_realloc_slot_table(tbl, ses->bc_attrs.max_reqs, 0);
+ if (status && tbl->slots == NULL)
+ /* Fore and back channel share a connection so get
+ * both slot tables or neither */
+ nfs4_destroy_slot_tables(ses);
return status;
}
{
struct nfs_client *clp = server->nfs_client;
+ if (test_and_clear_bit(NFS_DELEGATED_STATE, &state->flags))
+ nfs_async_inode_return_delegation(state->inode, &state->stateid);
nfs4_state_mark_reclaim_nograce(clp, state);
nfs4_schedule_state_manager(clp);
}
xdr_inline_pages(&req->rq_rcv_buf, replen << 2,
args->acl_pages, args->acl_pgbase, args->acl_len);
- xdr_set_scratch_buffer(xdr, page_address(args->acl_scratch), PAGE_SIZE);
encode_nops(&hdr);
}
struct compound_hdr hdr;
int status;
+ if (res->acl_scratch != NULL) {
+ void *p = page_address(res->acl_scratch);
+ xdr_set_scratch_buffer(xdr, p, PAGE_SIZE);
+ }
status = decode_compound_hdr(xdr, &hdr);
if (status)
goto out;
nsegs = argv[4].v_nmembs;
if (argv[4].v_size != argsz[4])
goto out;
+ if (nsegs > UINT_MAX / sizeof(__u64))
+ goto out;
/*
* argv[4] points to segment numbers this ioctl cleans. We
/**
* attrib.c - NTFS attribute operations. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2007 Anton Altaparmakov
+ * Copyright (c) 2001-2012 Anton Altaparmakov and Tuxera Inc.
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
unsigned long flags;
bool is_retry = false;
+ BUG_ON(!ni);
ntfs_debug("Entering for i_ino 0x%lx, vcn 0x%llx, %s_locked.",
ni->mft_no, (unsigned long long)vcn,
write_locked ? "write" : "read");
- BUG_ON(!ni);
BUG_ON(!NInoNonResident(ni));
BUG_ON(vcn < 0);
if (!ni->runlist.rl) {
int err = 0;
bool is_retry = false;
+ BUG_ON(!ni);
ntfs_debug("Entering for i_ino 0x%lx, vcn 0x%llx, with%s ctx.",
ni->mft_no, (unsigned long long)vcn, ctx ? "" : "out");
- BUG_ON(!ni);
BUG_ON(!NInoNonResident(ni));
BUG_ON(vcn < 0);
if (!ni->runlist.rl) {
/**
* mft.c - NTFS kernel mft record operations. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc.
+ * Copyright (c) 2001-2012 Anton Altaparmakov and Tuxera Inc.
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
ntfs_error(vol->sb, "Failed to merge runlists for mft "
"bitmap.");
if (ntfs_cluster_free_from_rl(vol, rl2)) {
- ntfs_error(vol->sb, "Failed to dealocate "
+ ntfs_error(vol->sb, "Failed to deallocate "
"allocated cluster.%s", es);
NVolSetErrors(vol);
}
ntfs_error(vol->sb, "Failed to merge runlists for mft data "
"attribute.");
if (ntfs_cluster_free_from_rl(vol, rl2)) {
- ntfs_error(vol->sb, "Failed to dealocate clusters "
+ ntfs_error(vol->sb, "Failed to deallocate clusters "
"from the mft data attribute.%s", es);
NVolSetErrors(vol);
}
/*
* super.c - NTFS kernel super block handling. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc.
+ * Copyright (c) 2001-2012 Anton Altaparmakov and Tuxera Inc.
* Copyright (c) 2001,2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
{
MFT_REF mref;
struct inode *vi;
- ntfs_inode *ni;
struct page *page;
u32 *kaddr, *kend;
ntfs_name *name = NULL;
"is not the system volume.", i_size_read(vi));
goto iput_out;
}
- ni = NTFS_I(vi);
page = ntfs_map_page(vi->i_mapping, 0);
if (IS_ERR(page)) {
ntfs_error(vol->sb, "Failed to read from hiberfil.sys.");
handle_t *handle = NULL;
struct buffer_head *old_dir_bh = NULL;
struct buffer_head *new_dir_bh = NULL;
- nlink_t old_dir_nlink = old_dir->i_nlink;
+ u32 old_dir_nlink = old_dir->i_nlink;
struct ocfs2_dinode *old_di;
struct ocfs2_dir_lookup_result old_inode_dot_dot_res = { NULL, };
struct ocfs2_dir_lookup_result target_lookup_res = { NULL, };
}
}
+/* Return 1 if 'cmd' will block on frozen filesystem */
+static int quotactl_cmd_write(int cmd)
+{
+ switch (cmd) {
+ case Q_GETFMT:
+ case Q_GETINFO:
+ case Q_SYNC:
+ case Q_XGETQSTAT:
+ case Q_XGETQUOTA:
+ case Q_XQUOTASYNC:
+ return 0;
+ }
+ return 1;
+}
+
/*
* look up a superblock on which quota ops will be performed
* - use the name of a block device to find the superblock thereon
*/
-static struct super_block *quotactl_block(const char __user *special)
+static struct super_block *quotactl_block(const char __user *special, int cmd)
{
#ifdef CONFIG_BLOCK
struct block_device *bdev;
putname(tmp);
if (IS_ERR(bdev))
return ERR_CAST(bdev);
- sb = get_super(bdev);
+ if (quotactl_cmd_write(cmd))
+ sb = get_super_thawed(bdev);
+ else
+ sb = get_super(bdev);
bdput(bdev);
if (!sb)
return ERR_PTR(-ENODEV);
pathp = &path;
}
- sb = quotactl_block(special);
+ sb = quotactl_block(special, cmds);
if (IS_ERR(sb)) {
ret = PTR_ERR(sb);
goto out;
}
SYSCALL_DEFINE3(poll, struct pollfd __user *, ufds, unsigned int, nfds,
- long, timeout_msecs)
+ int, timeout_msecs)
{
struct timespec end_time, *to = NULL;
int ret;
#include <linux/signalfd.h>
#include <linux/syscalls.h>
+void signalfd_cleanup(struct sighand_struct *sighand)
+{
+ wait_queue_head_t *wqh = &sighand->signalfd_wqh;
+ /*
+ * The lockless check can race with remove_wait_queue() in progress,
+ * but in this case its caller should run under rcu_read_lock() and
+ * sighand_cachep is SLAB_DESTROY_BY_RCU, we can safely return.
+ */
+ if (likely(!waitqueue_active(wqh)))
+ return;
+
+ /* wait_queue_t->func(POLLFREE) should do remove_wait_queue() */
+ wake_up_poll(wqh, POLLHUP | POLLFREE);
+}
+
struct signalfd_ctx {
sigset_t sigmask;
};
EXPORT_SYMBOL(get_super);
+/**
+ * get_super_thawed - get thawed superblock of a device
+ * @bdev: device to get the superblock for
+ *
+ * Scans the superblock list and finds the superblock of the file system
+ * mounted on the device. The superblock is returned once it is thawed
+ * (or immediately if it was not frozen). %NULL is returned if no match
+ * is found.
+ */
+struct super_block *get_super_thawed(struct block_device *bdev)
+{
+ while (1) {
+ struct super_block *s = get_super(bdev);
+ if (!s || s->s_frozen == SB_UNFROZEN)
+ return s;
+ up_read(&s->s_umount);
+ vfs_check_frozen(s, SB_FREEZE_WRITE);
+ put_super(s);
+ }
+}
+EXPORT_SYMBOL(get_super_thawed);
+
/**
* get_active_super - get an active reference to the superblock of a device
* @bdev: device to get the superblock for
extern void *kmem_zone_alloc(kmem_zone_t *, unsigned int __nocast);
extern void *kmem_zone_zalloc(kmem_zone_t *, unsigned int __nocast);
-static inline int
-kmem_shake_allow(gfp_t gfp_mask)
-{
- return ((gfp_mask & __GFP_WAIT) && (gfp_mask & __GFP_FS));
-}
-
#endif /* __XFS_SUPPORT_KMEM_H__ */
static struct lock_class_key xfs_dquot_other_class;
-/*
- * Allocate and initialize a dquot. We don't always allocate fresh memory;
- * we try to reclaim a free dquot if the number of incore dquots are above
- * a threshold.
- * The only field inside the core that gets initialized at this point
- * is the d_id field. The idea is to fill in the entire q_core
- * when we read in the on disk dquot.
- */
-STATIC xfs_dquot_t *
-xfs_qm_dqinit(
- xfs_mount_t *mp,
- xfs_dqid_t id,
- uint type)
-{
- xfs_dquot_t *dqp;
- boolean_t brandnewdquot;
-
- brandnewdquot = xfs_qm_dqalloc_incore(&dqp);
- dqp->dq_flags = type;
- dqp->q_core.d_id = cpu_to_be32(id);
- dqp->q_mount = mp;
-
- /*
- * No need to re-initialize these if this is a reclaimed dquot.
- */
- if (brandnewdquot) {
- INIT_LIST_HEAD(&dqp->q_freelist);
- mutex_init(&dqp->q_qlock);
- init_waitqueue_head(&dqp->q_pinwait);
-
- /*
- * Because we want to use a counting completion, complete
- * the flush completion once to allow a single access to
- * the flush completion without blocking.
- */
- init_completion(&dqp->q_flush);
- complete(&dqp->q_flush);
-
- trace_xfs_dqinit(dqp);
- } else {
- /*
- * Only the q_core portion was zeroed in dqreclaim_one().
- * So, we need to reset others.
- */
- dqp->q_nrefs = 0;
- dqp->q_blkno = 0;
- INIT_LIST_HEAD(&dqp->q_mplist);
- INIT_LIST_HEAD(&dqp->q_hashlist);
- dqp->q_bufoffset = 0;
- dqp->q_fileoffset = 0;
- dqp->q_transp = NULL;
- dqp->q_gdquot = NULL;
- dqp->q_res_bcount = 0;
- dqp->q_res_icount = 0;
- dqp->q_res_rtbcount = 0;
- atomic_set(&dqp->q_pincount, 0);
- dqp->q_hash = NULL;
- ASSERT(list_empty(&dqp->q_freelist));
-
- trace_xfs_dqreuse(dqp);
- }
-
- /*
- * In either case we need to make sure group quotas have a different
- * lock class than user quotas, to make sure lockdep knows we can
- * locks of one of each at the same time.
- */
- if (!(type & XFS_DQ_USER))
- lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class);
-
- /*
- * log item gets initialized later
- */
- return (dqp);
-}
-
/*
* This is called to free all the memory associated with a dquot
*/
if (!d->d_btimer) {
if ((d->d_blk_softlimit &&
- (be64_to_cpu(d->d_bcount) >=
+ (be64_to_cpu(d->d_bcount) >
be64_to_cpu(d->d_blk_softlimit))) ||
(d->d_blk_hardlimit &&
- (be64_to_cpu(d->d_bcount) >=
+ (be64_to_cpu(d->d_bcount) >
be64_to_cpu(d->d_blk_hardlimit)))) {
d->d_btimer = cpu_to_be32(get_seconds() +
mp->m_quotainfo->qi_btimelimit);
}
} else {
if ((!d->d_blk_softlimit ||
- (be64_to_cpu(d->d_bcount) <
+ (be64_to_cpu(d->d_bcount) <=
be64_to_cpu(d->d_blk_softlimit))) &&
(!d->d_blk_hardlimit ||
- (be64_to_cpu(d->d_bcount) <
+ (be64_to_cpu(d->d_bcount) <=
be64_to_cpu(d->d_blk_hardlimit)))) {
d->d_btimer = 0;
}
if (!d->d_itimer) {
if ((d->d_ino_softlimit &&
- (be64_to_cpu(d->d_icount) >=
+ (be64_to_cpu(d->d_icount) >
be64_to_cpu(d->d_ino_softlimit))) ||
(d->d_ino_hardlimit &&
- (be64_to_cpu(d->d_icount) >=
+ (be64_to_cpu(d->d_icount) >
be64_to_cpu(d->d_ino_hardlimit)))) {
d->d_itimer = cpu_to_be32(get_seconds() +
mp->m_quotainfo->qi_itimelimit);
}
} else {
if ((!d->d_ino_softlimit ||
- (be64_to_cpu(d->d_icount) <
+ (be64_to_cpu(d->d_icount) <=
be64_to_cpu(d->d_ino_softlimit))) &&
(!d->d_ino_hardlimit ||
- (be64_to_cpu(d->d_icount) <
+ (be64_to_cpu(d->d_icount) <=
be64_to_cpu(d->d_ino_hardlimit)))) {
d->d_itimer = 0;
}
if (!d->d_rtbtimer) {
if ((d->d_rtb_softlimit &&
- (be64_to_cpu(d->d_rtbcount) >=
+ (be64_to_cpu(d->d_rtbcount) >
be64_to_cpu(d->d_rtb_softlimit))) ||
(d->d_rtb_hardlimit &&
- (be64_to_cpu(d->d_rtbcount) >=
+ (be64_to_cpu(d->d_rtbcount) >
be64_to_cpu(d->d_rtb_hardlimit)))) {
d->d_rtbtimer = cpu_to_be32(get_seconds() +
mp->m_quotainfo->qi_rtbtimelimit);
}
} else {
if ((!d->d_rtb_softlimit ||
- (be64_to_cpu(d->d_rtbcount) <
+ (be64_to_cpu(d->d_rtbcount) <=
be64_to_cpu(d->d_rtb_softlimit))) &&
(!d->d_rtb_hardlimit ||
- (be64_to_cpu(d->d_rtbcount) <
+ (be64_to_cpu(d->d_rtbcount) <=
be64_to_cpu(d->d_rtb_hardlimit)))) {
d->d_rtbtimer = 0;
}
int error;
int cancelflags = 0;
- dqp = xfs_qm_dqinit(mp, id, type);
+
+ dqp = kmem_zone_zalloc(xfs_Gqm->qm_dqzone, KM_SLEEP);
+
+ dqp->dq_flags = type;
+ dqp->q_core.d_id = cpu_to_be32(id);
+ dqp->q_mount = mp;
+ INIT_LIST_HEAD(&dqp->q_freelist);
+ mutex_init(&dqp->q_qlock);
+ init_waitqueue_head(&dqp->q_pinwait);
+
+ /*
+ * Because we want to use a counting completion, complete
+ * the flush completion once to allow a single access to
+ * the flush completion without blocking.
+ */
+ init_completion(&dqp->q_flush);
+ complete(&dqp->q_flush);
+
+ /*
+ * Make sure group quotas have a different lock class than user
+ * quotas.
+ */
+ if (!(type & XFS_DQ_USER))
+ lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class);
+
+ atomic_inc(&xfs_Gqm->qm_totaldquots);
trace_xfs_dqread(dqp);
old_ptr = item->ri_buf[item->ri_cnt-1].i_addr;
old_len = item->ri_buf[item->ri_cnt-1].i_len;
- ptr = kmem_realloc(old_ptr, len+old_len, old_len, 0u);
+ ptr = kmem_realloc(old_ptr, len+old_len, old_len, KM_SLEEP);
memcpy(&ptr[old_len], dp, len); /* d, s, l */
item->ri_buf[item->ri_cnt-1].i_len += len;
item->ri_buf[item->ri_cnt-1].i_addr = ptr;
if (!errs && ddq->d_id) {
if (ddq->d_blk_softlimit &&
- be64_to_cpu(ddq->d_bcount) >=
+ be64_to_cpu(ddq->d_bcount) >
be64_to_cpu(ddq->d_blk_softlimit)) {
if (!ddq->d_btimer) {
if (flags & XFS_QMOPT_DOWARN)
}
}
if (ddq->d_ino_softlimit &&
- be64_to_cpu(ddq->d_icount) >=
+ be64_to_cpu(ddq->d_icount) >
be64_to_cpu(ddq->d_ino_softlimit)) {
if (!ddq->d_itimer) {
if (flags & XFS_QMOPT_DOWARN)
}
}
if (ddq->d_rtb_softlimit &&
- be64_to_cpu(ddq->d_rtbcount) >=
+ be64_to_cpu(ddq->d_rtbcount) >
be64_to_cpu(ddq->d_rtb_softlimit)) {
if (!ddq->d_rtbtimer) {
if (flags & XFS_QMOPT_DOWARN)
*/
struct mutex xfs_Gqm_lock;
struct xfs_qm *xfs_Gqm;
-uint ndquot;
kmem_zone_t *qm_dqzone;
kmem_zone_t *qm_dqtrxzone;
goto out_free_udqhash;
hsize /= sizeof(xfs_dqhash_t);
- ndquot = hsize << 8;
xqm = kmem_zalloc(sizeof(xfs_qm_t), KM_SLEEP);
xqm->qm_dqhashmask = hsize - 1;
xqm->qm_dqtrxzone = qm_dqtrxzone;
atomic_set(&xqm->qm_totaldquots, 0);
- xqm->qm_dqfree_ratio = XFS_QM_DQFREE_RATIO;
xqm->qm_nrefs = 0;
return xqm;
return 0;
}
+STATIC void
+xfs_qm_dqfree_one(
+ struct xfs_dquot *dqp)
+{
+ struct xfs_mount *mp = dqp->q_mount;
+ struct xfs_quotainfo *qi = mp->m_quotainfo;
+ mutex_lock(&dqp->q_hash->qh_lock);
+ list_del_init(&dqp->q_hashlist);
+ dqp->q_hash->qh_version++;
+ mutex_unlock(&dqp->q_hash->qh_lock);
-/*
- * Pop the least recently used dquot off the freelist and recycle it.
- */
-STATIC struct xfs_dquot *
-xfs_qm_dqreclaim_one(void)
+ mutex_lock(&qi->qi_dqlist_lock);
+ list_del_init(&dqp->q_mplist);
+ qi->qi_dquots--;
+ qi->qi_dqreclaims++;
+ mutex_unlock(&qi->qi_dqlist_lock);
+
+ xfs_qm_dqdestroy(dqp);
+}
+
+STATIC void
+xfs_qm_dqreclaim_one(
+ struct xfs_dquot *dqp,
+ struct list_head *dispose_list)
{
- struct xfs_dquot *dqp;
- int restarts = 0;
+ struct xfs_mount *mp = dqp->q_mount;
+ int error;
- mutex_lock(&xfs_Gqm->qm_dqfrlist_lock);
-restart:
- list_for_each_entry(dqp, &xfs_Gqm->qm_dqfrlist, q_freelist) {
- struct xfs_mount *mp = dqp->q_mount;
+ if (!xfs_dqlock_nowait(dqp))
+ goto out_busy;
- if (!xfs_dqlock_nowait(dqp))
- continue;
+ /*
+ * This dquot has acquired a reference in the meantime remove it from
+ * the freelist and try again.
+ */
+ if (dqp->q_nrefs) {
+ xfs_dqunlock(dqp);
- /*
- * This dquot has already been grabbed by dqlookup.
- * Remove it from the freelist and try again.
- */
- if (dqp->q_nrefs) {
- trace_xfs_dqreclaim_want(dqp);
- XQM_STATS_INC(xqmstats.xs_qm_dqwants);
-
- list_del_init(&dqp->q_freelist);
- xfs_Gqm->qm_dqfrlist_cnt--;
- restarts++;
- goto dqunlock;
- }
+ trace_xfs_dqreclaim_want(dqp);
+ XQM_STATS_INC(xqmstats.xs_qm_dqwants);
- ASSERT(dqp->q_hash);
- ASSERT(!list_empty(&dqp->q_mplist));
+ list_del_init(&dqp->q_freelist);
+ xfs_Gqm->qm_dqfrlist_cnt--;
+ return;
+ }
- /*
- * Try to grab the flush lock. If this dquot is in the process
- * of getting flushed to disk, we don't want to reclaim it.
- */
- if (!xfs_dqflock_nowait(dqp))
- goto dqunlock;
+ ASSERT(dqp->q_hash);
+ ASSERT(!list_empty(&dqp->q_mplist));
- /*
- * We have the flush lock so we know that this is not in the
- * process of being flushed. So, if this is dirty, flush it
- * DELWRI so that we don't get a freelist infested with
- * dirty dquots.
- */
- if (XFS_DQ_IS_DIRTY(dqp)) {
- int error;
+ /*
+ * Try to grab the flush lock. If this dquot is in the process of
+ * getting flushed to disk, we don't want to reclaim it.
+ */
+ if (!xfs_dqflock_nowait(dqp))
+ goto out_busy;
- trace_xfs_dqreclaim_dirty(dqp);
+ /*
+ * We have the flush lock so we know that this is not in the
+ * process of being flushed. So, if this is dirty, flush it
+ * DELWRI so that we don't get a freelist infested with
+ * dirty dquots.
+ */
+ if (XFS_DQ_IS_DIRTY(dqp)) {
+ trace_xfs_dqreclaim_dirty(dqp);
- /*
- * We flush it delayed write, so don't bother
- * releasing the freelist lock.
- */
- error = xfs_qm_dqflush(dqp, SYNC_TRYLOCK);
- if (error) {
- xfs_warn(mp, "%s: dquot %p flush failed",
- __func__, dqp);
- }
- goto dqunlock;
+ /*
+ * We flush it delayed write, so don't bother releasing the
+ * freelist lock.
+ */
+ error = xfs_qm_dqflush(dqp, 0);
+ if (error) {
+ xfs_warn(mp, "%s: dquot %p flush failed",
+ __func__, dqp);
}
- xfs_dqfunlock(dqp);
/*
- * Prevent lookup now that we are going to reclaim the dquot.
- * Once XFS_DQ_FREEING is set lookup won't touch the dquot,
- * thus we can drop the lock now.
+ * Give the dquot another try on the freelist, as the
+ * flushing will take some time.
*/
- dqp->dq_flags |= XFS_DQ_FREEING;
- xfs_dqunlock(dqp);
-
- mutex_lock(&dqp->q_hash->qh_lock);
- list_del_init(&dqp->q_hashlist);
- dqp->q_hash->qh_version++;
- mutex_unlock(&dqp->q_hash->qh_lock);
-
- mutex_lock(&mp->m_quotainfo->qi_dqlist_lock);
- list_del_init(&dqp->q_mplist);
- mp->m_quotainfo->qi_dquots--;
- mp->m_quotainfo->qi_dqreclaims++;
- mutex_unlock(&mp->m_quotainfo->qi_dqlist_lock);
+ goto out_busy;
+ }
+ xfs_dqfunlock(dqp);
- ASSERT(dqp->q_nrefs == 0);
- list_del_init(&dqp->q_freelist);
- xfs_Gqm->qm_dqfrlist_cnt--;
+ /*
+ * Prevent lookups now that we are past the point of no return.
+ */
+ dqp->dq_flags |= XFS_DQ_FREEING;
+ xfs_dqunlock(dqp);
- mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock);
- return dqp;
-dqunlock:
- xfs_dqunlock(dqp);
- if (restarts >= XFS_QM_RECLAIM_MAX_RESTARTS)
- break;
- goto restart;
- }
+ ASSERT(dqp->q_nrefs == 0);
+ list_move_tail(&dqp->q_freelist, dispose_list);
+ xfs_Gqm->qm_dqfrlist_cnt--;
- mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock);
- return NULL;
-}
+ trace_xfs_dqreclaim_done(dqp);
+ XQM_STATS_INC(xqmstats.xs_qm_dqreclaims);
+ return;
-/*
- * Traverse the freelist of dquots and attempt to reclaim a maximum of
- * 'howmany' dquots. This operation races with dqlookup(), and attempts to
- * favor the lookup function ...
- */
-STATIC int
-xfs_qm_shake_freelist(
- int howmany)
-{
- int nreclaimed = 0;
- xfs_dquot_t *dqp;
+out_busy:
+ xfs_dqunlock(dqp);
- if (howmany <= 0)
- return 0;
+ /*
+ * Move the dquot to the tail of the list so that we don't spin on it.
+ */
+ list_move_tail(&dqp->q_freelist, &xfs_Gqm->qm_dqfrlist);
- while (nreclaimed < howmany) {
- dqp = xfs_qm_dqreclaim_one();
- if (!dqp)
- return nreclaimed;
- xfs_qm_dqdestroy(dqp);
- nreclaimed++;
- }
- return nreclaimed;
+ trace_xfs_dqreclaim_busy(dqp);
+ XQM_STATS_INC(xqmstats.xs_qm_dqreclaim_misses);
}
-/*
- * The kmem_shake interface is invoked when memory is running low.
- */
-/* ARGSUSED */
STATIC int
xfs_qm_shake(
- struct shrinker *shrink,
- struct shrink_control *sc)
+ struct shrinker *shrink,
+ struct shrink_control *sc)
{
- int ndqused, nfree, n;
- gfp_t gfp_mask = sc->gfp_mask;
-
- if (!kmem_shake_allow(gfp_mask))
- return 0;
- if (!xfs_Gqm)
- return 0;
-
- nfree = xfs_Gqm->qm_dqfrlist_cnt; /* free dquots */
- /* incore dquots in all f/s's */
- ndqused = atomic_read(&xfs_Gqm->qm_totaldquots) - nfree;
-
- ASSERT(ndqused >= 0);
+ int nr_to_scan = sc->nr_to_scan;
+ LIST_HEAD (dispose_list);
+ struct xfs_dquot *dqp;
- if (nfree <= ndqused && nfree < ndquot)
+ if ((sc->gfp_mask & (__GFP_FS|__GFP_WAIT)) != (__GFP_FS|__GFP_WAIT))
return 0;
+ if (!nr_to_scan)
+ goto out;
- ndqused *= xfs_Gqm->qm_dqfree_ratio; /* target # of free dquots */
- n = nfree - ndqused - ndquot; /* # over target */
-
- return xfs_qm_shake_freelist(MAX(nfree, n));
-}
-
-
-/*------------------------------------------------------------------*/
-
-/*
- * Return a new incore dquot. Depending on the number of
- * dquots in the system, we either allocate a new one on the kernel heap,
- * or reclaim a free one.
- * Return value is B_TRUE if we allocated a new dquot, B_FALSE if we managed
- * to reclaim an existing one from the freelist.
- */
-boolean_t
-xfs_qm_dqalloc_incore(
- xfs_dquot_t **O_dqpp)
-{
- xfs_dquot_t *dqp;
-
- /*
- * Check against high water mark to see if we want to pop
- * a nincompoop dquot off the freelist.
- */
- if (atomic_read(&xfs_Gqm->qm_totaldquots) >= ndquot) {
- /*
- * Try to recycle a dquot from the freelist.
- */
- if ((dqp = xfs_qm_dqreclaim_one())) {
- XQM_STATS_INC(xqmstats.xs_qm_dqreclaims);
- /*
- * Just zero the core here. The rest will get
- * reinitialized by caller. XXX we shouldn't even
- * do this zero ...
- */
- memset(&dqp->q_core, 0, sizeof(dqp->q_core));
- *O_dqpp = dqp;
- return B_FALSE;
- }
- XQM_STATS_INC(xqmstats.xs_qm_dqreclaim_misses);
+ mutex_lock(&xfs_Gqm->qm_dqfrlist_lock);
+ while (!list_empty(&xfs_Gqm->qm_dqfrlist)) {
+ if (nr_to_scan-- <= 0)
+ break;
+ dqp = list_first_entry(&xfs_Gqm->qm_dqfrlist, struct xfs_dquot,
+ q_freelist);
+ xfs_qm_dqreclaim_one(dqp, &dispose_list);
}
+ mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock);
- /*
- * Allocate a brand new dquot on the kernel heap and return it
- * to the caller to initialize.
- */
- ASSERT(xfs_Gqm->qm_dqzone != NULL);
- *O_dqpp = kmem_zone_zalloc(xfs_Gqm->qm_dqzone, KM_SLEEP);
- atomic_inc(&xfs_Gqm->qm_totaldquots);
-
- return B_TRUE;
+ while (!list_empty(&dispose_list)) {
+ dqp = list_first_entry(&dispose_list, struct xfs_dquot,
+ q_freelist);
+ list_del_init(&dqp->q_freelist);
+ xfs_qm_dqfree_one(dqp);
+ }
+out:
+ return (xfs_Gqm->qm_dqfrlist_cnt / 100) * sysctl_vfs_cache_pressure;
}
-
/*
* Start a transaction and write the incore superblock changes to
* disk. flags parameter indicates which fields have changed.
struct xfs_qm;
struct xfs_inode;
-extern uint ndquot;
extern struct mutex xfs_Gqm_lock;
extern struct xfs_qm *xfs_Gqm;
extern kmem_zone_t *qm_dqzone;
extern kmem_zone_t *qm_dqtrxzone;
-/*
- * Ditto, for xfs_qm_dqreclaim_one.
- */
-#define XFS_QM_RECLAIM_MAX_RESTARTS 4
-
-/*
- * Ideal ratio of free to in use dquots. Quota manager makes an attempt
- * to keep this balance.
- */
-#define XFS_QM_DQFREE_RATIO 2
-
/*
* Dquot hashtable constants/threshold values.
*/
int qm_dqfrlist_cnt;
atomic_t qm_totaldquots; /* total incore dquots */
uint qm_nrefs; /* file systems with quota on */
- int qm_dqfree_ratio;/* ratio of free to inuse dquots */
kmem_zone_t *qm_dqzone; /* dquot mem-alloc zone */
kmem_zone_t *qm_dqtrxzone; /* t_dqinfo of transactions */
} xfs_qm_t;
extern int xfs_qm_write_sb_changes(xfs_mount_t *, __int64_t);
/* dquot stuff */
-extern boolean_t xfs_qm_dqalloc_incore(xfs_dquot_t **);
extern int xfs_qm_dqpurge_all(xfs_mount_t *, uint);
extern void xfs_qm_dqrele_all_inodes(xfs_mount_t *, uint);
{
/* maximum; incore; ratio free to inuse; freelist */
seq_printf(m, "%d\t%d\t%d\t%u\n",
- ndquot,
+ 0,
xfs_Gqm? atomic_read(&xfs_Gqm->qm_totaldquots) : 0,
- xfs_Gqm? xfs_Gqm->qm_dqfree_ratio : 0,
+ 0,
xfs_Gqm? xfs_Gqm->qm_dqfrlist_cnt : 0);
return 0;
}
(XFS_IS_OQUOTA_ENFORCED(mp) &&
(dst->d_flags & (FS_PROJ_QUOTA | FS_GROUP_QUOTA)))) &&
dst->d_id != 0) {
- if (((int) dst->d_bcount >= (int) dst->d_blk_softlimit) &&
+ if (((int) dst->d_bcount > (int) dst->d_blk_softlimit) &&
(dst->d_blk_softlimit > 0)) {
ASSERT(dst->d_btimer != 0);
}
- if (((int) dst->d_icount >= (int) dst->d_ino_softlimit) &&
+ if (((int) dst->d_icount > (int) dst->d_ino_softlimit) &&
(dst->d_ino_softlimit > 0)) {
ASSERT(dst->d_itimer != 0);
}
DEFINE_DQUOT_EVENT(xfs_dqadjust);
DEFINE_DQUOT_EVENT(xfs_dqreclaim_want);
DEFINE_DQUOT_EVENT(xfs_dqreclaim_dirty);
-DEFINE_DQUOT_EVENT(xfs_dqreclaim_unlink);
+DEFINE_DQUOT_EVENT(xfs_dqreclaim_busy);
+DEFINE_DQUOT_EVENT(xfs_dqreclaim_done);
DEFINE_DQUOT_EVENT(xfs_dqattach_found);
DEFINE_DQUOT_EVENT(xfs_dqattach_get);
-DEFINE_DQUOT_EVENT(xfs_dqinit);
-DEFINE_DQUOT_EVENT(xfs_dqreuse);
DEFINE_DQUOT_EVENT(xfs_dqalloc);
DEFINE_DQUOT_EVENT(xfs_dqtobp_read);
DEFINE_DQUOT_EVENT(xfs_dqread);
{
struct xfs_log_item_desc *lidp;
- ASSERT(lip->li_mountp = tp->t_mountp);
- ASSERT(lip->li_ailp = tp->t_mountp->m_ail);
+ ASSERT(lip->li_mountp == tp->t_mountp);
+ ASSERT(lip->li_ailp == tp->t_mountp->m_ail);
lidp = kmem_zone_zalloc(xfs_log_item_desc_zone, KM_SLEEP | KM_NOFS);
* nblks.
*/
if (hardlimit > 0ULL &&
- hardlimit <= nblks + *resbcountp) {
+ hardlimit < nblks + *resbcountp) {
xfs_quota_warn(mp, dqp, QUOTA_NL_BHARDWARN);
goto error_return;
}
if (softlimit > 0ULL &&
- softlimit <= nblks + *resbcountp) {
+ softlimit < nblks + *resbcountp) {
if ((timer != 0 && get_seconds() > timer) ||
(warns != 0 && warns >= warnlimit)) {
xfs_quota_warn(mp, dqp,
if (!softlimit)
softlimit = q->qi_isoftlimit;
- if (hardlimit > 0ULL && count >= hardlimit) {
+ if (hardlimit > 0ULL &&
+ hardlimit < ninos + count) {
xfs_quota_warn(mp, dqp, QUOTA_NL_IHARDWARN);
goto error_return;
}
- if (softlimit > 0ULL && count >= softlimit) {
+ if (softlimit > 0ULL &&
+ softlimit < ninos + count) {
if ((timer != 0 && get_seconds() > timer) ||
(warns != 0 && warns >= warnlimit)) {
xfs_quota_warn(mp, dqp,
--- /dev/null
+#ifndef _ASM_IO_64_NONATOMIC_HI_LO_H_
+#define _ASM_IO_64_NONATOMIC_HI_LO_H_
+
+#include <linux/io.h>
+#include <asm-generic/int-ll64.h>
+
+#ifndef readq
+static inline __u64 readq(const volatile void __iomem *addr)
+{
+ const volatile u32 __iomem *p = addr;
+ u32 low, high;
+
+ high = readl(p + 1);
+ low = readl(p);
+
+ return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(__u64 val, volatile void __iomem *addr)
+{
+ writel(val >> 32, addr + 4);
+ writel(val, addr);
+}
+#endif
+
+#endif /* _ASM_IO_64_NONATOMIC_HI_LO_H_ */
--- /dev/null
+#ifndef _ASM_IO_64_NONATOMIC_LO_HI_H_
+#define _ASM_IO_64_NONATOMIC_LO_HI_H_
+
+#include <linux/io.h>
+#include <asm-generic/int-ll64.h>
+
+#ifndef readq
+static inline __u64 readq(const volatile void __iomem *addr)
+{
+ const volatile u32 __iomem *p = addr;
+ u32 low, high;
+
+ low = readl(p);
+ high = readl(p + 1);
+
+ return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(__u64 val, volatile void __iomem *addr)
+{
+ writel(val, addr);
+ writel(val >> 32, addr + 4);
+}
+#endif
+
+#endif /* _ASM_IO_64_NONATOMIC_LO_HI_H_ */
/* Destroy a virtual mapping cookie for a PCI BAR (memory or IO) */
struct pci_dev;
extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
-#else
+#elif defined(CONFIG_GENERIC_IOMAP)
struct pci_dev;
static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
{ }
#ifdef CONFIG_PCI
/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+/* Create a virtual mapping cookie for a port on a given PCI device.
+ * Do not call this directly, it exists to make it easier for architectures
+ * to override */
+#ifdef CONFIG_NO_GENERIC_PCI_IOPORT_MAP
+extern void __iomem *__pci_ioport_map(struct pci_dev *dev, unsigned long port,
+ unsigned int nr);
#else
+#define __pci_ioport_map(dev, port, nr) ioport_map((port), (nr))
+#endif
+
+#elif defined(CONFIG_GENERIC_PCI_IOMAP)
static inline void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
{
return NULL;
#define POLLRDHUP 0x2000
#endif
+#define POLLFREE 0x4000 /* currently only for epoll */
+
struct pollfd {
int fd;
short events;
header-y += drm_fourcc.h
header-y += drm_mode.h
header-y += drm_sarea.h
+header-y += exynos_drm.h
header-y += i810_drm.h
header-y += i915_drm.h
header-y += mga_drm.h
#define DRM_IOCTL_EXYNOS_PLANE_SET_ZPOS DRM_IOWR(DRM_COMMAND_BASE + \
DRM_EXYNOS_PLANE_SET_ZPOS, struct drm_exynos_plane_set_zpos)
+#ifdef __KERNEL__
+
/**
- * Platform Specific Structure for DRM based FIMD.
+ * A structure for lcd panel information.
*
* @timing: default video mode for initializing
+ * @width_mm: physical size of lcd width.
+ * @height_mm: physical size of lcd height.
+ */
+struct exynos_drm_panel_info {
+ struct fb_videomode timing;
+ u32 width_mm;
+ u32 height_mm;
+};
+
+/**
+ * Platform Specific Structure for DRM based FIMD.
+ *
+ * @panel: default panel info for initializing
* @default_win: default window layer number to be used for UI.
* @bpp: default bit per pixel.
*/
struct exynos_drm_fimd_pdata {
- struct fb_videomode timing;
+ struct exynos_drm_panel_info panel;
u32 vidcon0;
u32 vidcon1;
unsigned int default_win;
unsigned int bpp;
};
-#endif
+#endif /* __KERNEL__ */
+#endif /* _EXYNOS_DRM_H_ */
#define BINPRM_BUF_SIZE 128
#ifdef __KERNEL__
-#include <linux/list.h>
+#include <linux/sched.h>
#define CORENAME_MAX_SIZE 128
unsigned interp_flags;
unsigned interp_data;
unsigned long loader, exec;
+ char tcomm[TASK_COMM_LEN];
};
#define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0
return sizeof(w) == 4 ? hweight32(w) : hweight64(w);
}
+/**
+ * rol64 - rotate a 64-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u64 rol64(__u64 word, unsigned int shift)
+{
+ return (word << shift) | (word >> (64 - shift));
+}
+
+/**
+ * ror64 - rotate a 64-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u64 ror64(__u64 word, unsigned int shift)
+{
+ return (word >> shift) | (word << (64 - shift));
+}
+
/**
* rol32 - rotate a 32-bit value left
* @word: value to rotate
/* Throttle data */
struct throtl_data *td;
#endif
-#ifdef CONFIG_LOCKDEP
- int ioc_release_depth;
-#endif
};
#define QUEUE_FLAG_QUEUED 1 /* uses generic tag queueing */
char name[20]; /* name of the device type */
/* per-device flags */
__u8 sanyo_slot : 2; /* Sanyo 3 CD changer support */
- __u8 reserved : 6; /* not used yet */
+ __u8 keeplocked : 1; /* CDROM_LOCKDOOR status */
+ __u8 reserved : 5; /* not used yet */
int cdda_method; /* see flags */
__u8 last_sense;
__u8 media_written; /* dirty flag, DVD+RW bookkeeping */
unsigned long liovcnt, const struct compat_iovec __user *rvec,
unsigned long riovcnt, unsigned long flags);
+#else
+
+#define is_compat_task() (0)
+
#endif /* CONFIG_COMPAT */
#endif /* _LINUX_COMPAT_H */
};
extern struct dentry_stat_t dentry_stat;
-/*
- * Compare 2 name strings, return 0 if they match, otherwise non-zero.
- * The strings are both count bytes long, and count is non-zero.
- */
-static inline int dentry_cmp(const unsigned char *cs, size_t scount,
- const unsigned char *ct, size_t tcount)
-{
- int ret;
- if (scount != tcount)
- return 1;
- do {
- ret = (*cs != *ct);
- if (ret)
- break;
- cs++;
- ct++;
- tcount--;
- } while (tcount);
- return ret;
-}
-
/* Name hashing routines. Initial hash value */
/* Hash courtesy of the R5 hash in reiserfs modulo sign bits */
#define init_name_hash() 0
}
/* Compute the hash for a name string. */
-static inline unsigned int
-full_name_hash(const unsigned char *name, unsigned int len)
-{
- unsigned long hash = init_name_hash();
- while (len--)
- hash = partial_name_hash(*name++, hash);
- return end_name_hash(hash);
-}
+extern unsigned int full_name_hash(const unsigned char *, unsigned int);
/*
* Try to keep struct dentry aligned on 64 byte cachelines (this will
extern struct dentry *d_lookup(struct dentry *, struct qstr *);
extern struct dentry *d_hash_and_lookup(struct dentry *, struct qstr *);
extern struct dentry *__d_lookup(struct dentry *, struct qstr *);
-extern struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name,
+extern struct dentry *__d_lookup_rcu(const struct dentry *parent,
+ const struct qstr *name,
unsigned *seq, struct inode **inode);
/**
struct pubkey_hdr {
uint8_t version; /* key format version */
- time_t timestamp; /* key made, always 0 for now */
+ uint32_t timestamp; /* key made, always 0 for now */
uint8_t algo;
uint8_t nmpi;
char mpi[0];
struct signature_hdr {
uint8_t version; /* signature format version */
- time_t timestamp; /* signature made */
+ uint32_t timestamp; /* signature made */
uint8_t algo;
uint8_t hash;
uint8_t keyid[8];
elevator_merged_fn *elevator_merged_fn;
elevator_merge_req_fn *elevator_merge_req_fn;
elevator_allow_merge_fn *elevator_allow_merge_fn;
-
- /*
- * Used for both plugged list and elevator merging and in the
- * former case called without queue_lock. Read comment on top of
- * attempt_plug_merge() for details.
- */
elevator_bio_merged_fn *elevator_bio_merged_fn;
elevator_dispatch_fn *elevator_dispatch_fn;
extern void elv_add_request(struct request_queue *, struct request *, int);
extern void __elv_add_request(struct request_queue *, struct request *, int);
extern int elv_merge(struct request_queue *, struct request **, struct bio *);
-extern int elv_try_merge(struct request *, struct bio *);
extern void elv_merge_requests(struct request_queue *, struct request *,
struct request *);
extern void elv_merged_request(struct request_queue *, struct request *, int);
extern int elevator_init(struct request_queue *, char *);
extern void elevator_exit(struct elevator_queue *);
extern int elevator_change(struct request_queue *, const char *);
-extern int elv_rq_merge_ok(struct request *, struct bio *);
+extern bool elv_rq_merge_ok(struct request *, struct bio *);
/*
* Helper functions.
extern void put_filesystem(struct file_system_type *fs);
extern struct file_system_type *get_fs_type(const char *name);
extern struct super_block *get_super(struct block_device *);
+extern struct super_block *get_super_thawed(struct block_device *);
extern struct super_block *get_active_super(struct block_device *bdev);
extern void drop_super(struct super_block *sb);
extern void iterate_supers(void (*)(struct super_block *, void *), void *);
#ifndef _GPIO_KEYS_H
#define _GPIO_KEYS_H
+struct device;
+
struct gpio_keys_button {
/* Configuration parameters */
unsigned int code; /* input event code (KEY_*, SW_*) */
#include <linux/mod_devicetable.h>
-#define MAX_PAGE_BUFFER_COUNT 18
+#define MAX_PAGE_BUFFER_COUNT 19
#define MAX_MULTIPAGE_BUFFER_COUNT 32 /* 128K */
#pragma pack(push, 1)
IFLA_AF_SPEC,
IFLA_GROUP, /* Group the device belongs to */
IFLA_NET_NS_FD,
+ IFLA_EXT_MASK, /* Extended info mask, VFs, etc */
__IFLA_MAX
};
struct task_struct;
#ifdef CONFIG_BLOCK
-void put_io_context(struct io_context *ioc, struct request_queue *locked_q);
+void put_io_context(struct io_context *ioc);
void exit_io_context(struct task_struct *task);
struct io_context *get_task_io_context(struct task_struct *task,
gfp_t gfp_flags, int node);
void ioc_cgroup_changed(struct io_context *ioc);
#else
struct io_context;
-static inline void put_io_context(struct io_context *ioc,
- struct request_queue *locked_q) { }
+static inline void put_io_context(struct io_context *ioc) { }
static inline void exit_io_context(struct task_struct *task) { }
#endif
int rev;
u8 vibra_ctrl_cache[2];
+ /* PLL configuration */
int pll;
unsigned int sysclk;
+ unsigned int mclk;
unsigned int irq;
unsigned int irq_base;
#define MMC_CARD_SDXC (1<<6) /* card is SDXC */
#define MMC_CARD_REMOVED (1<<7) /* card has been removed */
#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */
+#define MMC_STATE_SLEEP (1<<9) /* card is in sleep state */
unsigned int quirks; /* card quirks */
#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
#define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED)
#define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
#define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED))
+#define mmc_card_is_sleep(c) ((c)->state & MMC_STATE_SLEEP)
#define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
#define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
#define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
+#define mmc_card_set_sleep(c) ((c)->state |= MMC_STATE_SLEEP)
+#define mmc_card_clr_sleep(c) ((c)->state &= ~MMC_STATE_SLEEP)
/*
* Quirk add/remove for MMC products.
*/
#ifndef LINUX_MMC_DW_MMC_H
#define LINUX_MMC_DW_MMC_H
+#include <linux/scatterlist.h>
+
#define MAX_MCI_SLOTS 2
enum dw_mci_state {
* @lock: Spinlock protecting the queue and associated data.
* @regs: Pointer to MMIO registers.
* @sg: Scatterlist entry currently being processed by PIO code, if any.
- * @pio_offset: Offset into the current scatterlist entry.
+ * @sg_miter: PIO mapping scatterlist iterator.
* @cur_slot: The slot which is currently using the controller.
* @mrq: The request currently being processed on @cur_slot,
* or NULL if the controller is idle.
void __iomem *regs;
struct scatterlist *sg;
- unsigned int pio_offset;
+ struct sg_mapping_iter sg_miter;
struct dw_mci_slot *cur_slot;
struct mmc_request *mrq;
#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */
#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \
MMC_CAP2_HS200_1_2V_SDR)
+#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */
mmc_pm_flag_t pm_caps; /* supported pm features */
unsigned int power_notify_type;
return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
}
+#ifdef CONFIG_MMC_CLKGATE
+void mmc_host_clk_hold(struct mmc_host *host);
+void mmc_host_clk_release(struct mmc_host *host);
+unsigned int mmc_host_clk_rate(struct mmc_host *host);
+
+#else
+static inline void mmc_host_clk_hold(struct mmc_host *host)
+{
+}
+
+static inline void mmc_host_clk_release(struct mmc_host *host)
+{
+}
+
+static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
+{
+ return host->ios.clock;
+}
+#endif
#endif /* LINUX_MMC_HOST_H */
static inline int mtd_suspend(struct mtd_info *mtd)
{
- if (!mtd->suspend)
- return -EOPNOTSUPP;
- return mtd->suspend(mtd);
+ return mtd->suspend ? mtd->suspend(mtd) : 0;
}
static inline void mtd_resume(struct mtd_info *mtd)
struct module *me;
};
-#define EBT_ALIGN(s) (((s) + (__alignof__(struct ebt_replace)-1)) & \
- ~(__alignof__(struct ebt_replace)-1))
+#define EBT_ALIGN(s) (((s) + (__alignof__(struct _xt_align)-1)) & \
+ ~(__alignof__(struct _xt_align)-1))
extern struct ebt_table *ebt_register_table(struct net *net,
const struct ebt_table *table);
extern void ebt_unregister_table(struct net *net, struct ebt_table *table);
size_t acl_len;
unsigned int acl_pgbase;
struct page ** acl_pages;
- struct page * acl_scratch;
struct nfs4_sequence_args seq_args;
};
size_t acl_len;
size_t acl_data_offset;
int acl_flags;
+ struct page * acl_scratch;
struct nfs4_sequence_res seq_res;
};
{ return; }
static inline int pm_qos_request(int pm_qos_class)
- { return 0; }
+{
+ switch (pm_qos_class) {
+ case PM_QOS_CPU_DMA_LATENCY:
+ return PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
+ case PM_QOS_NETWORK_LATENCY:
+ return PM_QOS_NETWORK_LAT_DEFAULT_VALUE;
+ case PM_QOS_NETWORK_THROUGHPUT:
+ return PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE;
+ default:
+ return PM_QOS_DEFAULT_VALUE;
+ }
+}
+
static inline int pm_qos_add_notifier(int pm_qos_class,
struct notifier_block *notifier)
{ return 0; }
* Limit the time part in order to ensure there are some bits left for the
* cycle counter and fraction multiply.
*/
+#if BITS_PER_LONG == 32
#define PROP_MAX_SHIFT (3*BITS_PER_LONG/4)
+#else
+#define PROP_MAX_SHIFT (BITS_PER_LONG/2)
+#endif
#define PROP_FRAC_SHIFT (BITS_PER_LONG - PROP_MAX_SHIFT - 1)
#define PROP_FRAC_BASE (1UL << PROP_FRAC_SHIFT)
{
const struct user_regset *regset = &view->regsets[setno];
+ if (!regset->get)
+ return -EOPNOTSUPP;
+
if (!access_ok(VERIFY_WRITE, data, size))
- return -EIO;
+ return -EFAULT;
return regset->get(target, regset, offset, size, NULL, data);
}
{
const struct user_regset *regset = &view->regsets[setno];
+ if (!regset->set)
+ return -EOPNOTSUPP;
+
if (!access_ok(VERIFY_READ, data, size))
- return -EIO;
+ return -EFAULT;
return regset->set(target, regset, offset, size, NULL, data);
}
#define TCA_ACT_TAB 1 /* attr type must be >=1 */
#define TCAA_MAX 1
+/* New extended info filters for IFLA_EXT_MASK */
+#define RTEXT_FILTER_VF (1 << 0)
+
/* End of information exported to user level */
#ifdef __KERNEL__
unsigned int needs_tend_set:1;
unsigned int no_dmars:1;
unsigned int chclr_present:1;
+ unsigned int slave_only:1;
};
/* DMA register */
wake_up(&tsk->sighand->signalfd_wqh);
}
+extern void signalfd_cleanup(struct sighand_struct *sighand);
+
#else /* CONFIG_SIGNALFD */
static inline void signalfd_notify(struct task_struct *tsk, int sig) { }
+static inline void signalfd_cleanup(struct sighand_struct *sighand) { }
+
#endif /* CONFIG_SIGNALFD */
#endif /* __KERNEL__ */
#endif /* _LINUX_SIGNALFD_H */
-
}
#endif /* NET_SKBUFF_DATA_USES_OFFSET */
+static inline void skb_mac_header_rebuild(struct sk_buff *skb)
+{
+ if (skb_mac_header_was_set(skb)) {
+ const unsigned char *old_mac = skb_mac_header(skb);
+
+ skb_set_mac_header(skb, -skb->mac_len);
+ memmove(skb_mac_header(skb), old_mac, skb->mac_len);
+ }
+}
+
static inline int skb_checksum_start_offset(const struct sk_buff *skb)
{
return skb->csum_start - skb_headroom(skb);
asmlinkage long sys_socketcall(int call, unsigned long __user *args);
asmlinkage long sys_listen(int, int);
asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
- long timeout);
+ int timeout);
asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, struct timeval __user *tvp);
asmlinkage long sys_old_select(struct sel_arg_struct __user *arg);
#define USB_PORT_FEAT_TEST 21
#define USB_PORT_FEAT_INDICATOR 22
#define USB_PORT_FEAT_C_PORT_L1 23
-#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
-#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
-#define USB_PORT_FEAT_PORT_REMOTE_WAKE_MASK 27
-#define USB_PORT_FEAT_BH_PORT_RESET 28
-#define USB_PORT_FEAT_C_BH_PORT_RESET 29
-#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
/*
* Port feature selectors added by USB 3.0 spec.
#define USB_PORT_FEAT_LINK_STATE 5
#define USB_PORT_FEAT_U1_TIMEOUT 23
#define USB_PORT_FEAT_U2_TIMEOUT 24
-#define USB_PORT_FEAT_C_LINK_STATE 25
-#define USB_PORT_FEAT_C_CONFIG_ERR 26
+#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
+#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27
#define USB_PORT_FEAT_BH_PORT_RESET 28
#define USB_PORT_FEAT_C_BH_PORT_RESET 29
*/
static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
{
- return le16_to_cpu(epd->wMaxPacketSize);
+ return __le16_to_cpu(epd->wMaxPacketSize);
}
/*-------------------------------------------------------------------------*/
int sco_init(void);
void sco_exit(void);
+void bt_sock_reclassify_lock(struct sock *sk, int proto);
+
#endif /* __BLUETOOTH_H */
static inline void hci_conn_hold(struct hci_conn *conn)
{
atomic_inc(&conn->refcnt);
- cancel_delayed_work_sync(&conn->disc_work);
+ cancel_delayed_work(&conn->disc_work);
}
static inline void hci_conn_put(struct hci_conn *conn)
} else {
timeo = msecs_to_jiffies(10);
}
- cancel_delayed_work_sync(&conn->disc_work);
+ cancel_delayed_work(&conn->disc_work);
queue_delayed_work(conn->hdev->workqueue,
- &conn->disc_work, jiffies + timeo);
+ &conn->disc_work, timeo);
}
}
{
BT_DBG("chan %p state %d timeout %ld", chan, chan->state, timeout);
- if (!__cancel_delayed_work(work))
+ if (!cancel_delayed_work(work))
l2cap_chan_hold(chan);
schedule_delayed_work(work, timeout);
}
static inline void l2cap_clear_timer(struct l2cap_chan *chan,
struct delayed_work *work)
{
- if (__cancel_delayed_work(work))
+ if (cancel_delayed_work(work))
l2cap_chan_put(chan);
}
#define __set_chan_timer(c, t) l2cap_set_timer(c, &c->chan_timer, (t))
#define __clear_chan_timer(c) l2cap_clear_timer(c, &c->chan_timer)
#define __set_retrans_timer(c) l2cap_set_timer(c, &c->retrans_timer, \
- L2CAP_DEFAULT_RETRANS_TO);
+ msecs_to_jiffies(L2CAP_DEFAULT_RETRANS_TO));
#define __clear_retrans_timer(c) l2cap_clear_timer(c, &c->retrans_timer)
#define __set_monitor_timer(c) l2cap_set_timer(c, &c->monitor_timer, \
- L2CAP_DEFAULT_MONITOR_TO);
+ msecs_to_jiffies(L2CAP_DEFAULT_MONITOR_TO));
#define __clear_monitor_timer(c) l2cap_clear_timer(c, &c->monitor_timer)
#define __set_ack_timer(c) l2cap_set_timer(c, &chan->ack_timer, \
- L2CAP_DEFAULT_ACK_TO);
+ msecs_to_jiffies(L2CAP_DEFAULT_ACK_TO));
#define __clear_ack_timer(c) l2cap_clear_timer(c, &c->ack_timer)
static inline int __seq_offset(struct l2cap_chan *chan, __u16 seq1, __u16 seq2)
struct l2cap_chan *l2cap_chan_create(struct sock *sk);
void l2cap_chan_close(struct l2cap_chan *chan, int reason);
void l2cap_chan_destroy(struct l2cap_chan *chan);
-inline int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
+int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
bdaddr_t *dst);
int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len,
u32 priority);
fl4->fl4_dport = dport;
fl4->fl4_sport = sport;
}
+
+/* Reset some input parameters after previous lookup */
+static inline void flowi4_update_output(struct flowi4 *fl4, int oif, __u8 tos,
+ __be32 daddr, __be32 saddr)
+{
+ fl4->flowi4_oif = oif;
+ fl4->flowi4_tos = tos;
+ fl4->daddr = daddr;
+ fl4->saddr = saddr;
+}
struct flowi6 {
__nf_conntrack_find(struct net *net, u16 zone,
const struct nf_conntrack_tuple *tuple);
-extern void nf_conntrack_hash_insert(struct nf_conn *ct);
+extern int nf_conntrack_hash_check_insert(struct nf_conn *ct);
extern void nf_ct_delete_from_lists(struct nf_conn *ct);
extern void nf_ct_insert_dying_list(struct nf_conn *ct);
extern void sock_update_netprioidx(struct sock *sk);
-static inline struct cgroup_netprio_state
- *task_netprio_state(struct task_struct *p)
+#if IS_BUILTIN(CONFIG_NETPRIO_CGROUP)
+
+static inline u32 task_netprioidx(struct task_struct *p)
{
-#if IS_ENABLED(CONFIG_NETPRIO_CGROUP)
- return container_of(task_subsys_state(p, net_prio_subsys_id),
- struct cgroup_netprio_state, css);
-#else
- return NULL;
-#endif
+ struct cgroup_netprio_state *state;
+ u32 idx;
+
+ rcu_read_lock();
+ state = container_of(task_subsys_state(p, net_prio_subsys_id),
+ struct cgroup_netprio_state, css);
+ idx = state->prioidx;
+ rcu_read_unlock();
+ return idx;
+}
+
+#elif IS_MODULE(CONFIG_NETPRIO_CGROUP)
+
+static inline u32 task_netprioidx(struct task_struct *p)
+{
+ struct cgroup_netprio_state *state;
+ int subsys_id;
+ u32 idx = 0;
+
+ rcu_read_lock();
+ subsys_id = rcu_dereference_index_check(net_prio_subsys_id,
+ rcu_read_lock_held());
+ if (subsys_id >= 0) {
+ state = container_of(task_subsys_state(p, subsys_id),
+ struct cgroup_netprio_state, css);
+ idx = state->prioidx;
+ }
+ rcu_read_unlock();
+ return idx;
}
#else
+static inline u32 task_netprioidx(struct task_struct *p)
+{
+ return 0;
+}
+
+#endif /* CONFIG_NETPRIO_CGROUP */
+
+#else
#define sock_update_netprioidx(sk)
#endif
if (IS_ERR(rt))
return rt;
ip_rt_put(rt);
+ flowi4_update_output(fl4, oif, tos, fl4->daddr, fl4->saddr);
}
security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
return ip_route_output_flow(net, fl4, sk);
fl4->fl4_dport = dport;
fl4->fl4_sport = sport;
ip_rt_put(rt);
+ flowi4_update_output(fl4, sk->sk_bound_dev_if,
+ RT_CONN_FLAGS(sk), fl4->daddr,
+ fl4->saddr);
security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
return ip_route_output_flow(sock_net(sk), fl4, sk);
}
typedef int (*rtnl_doit_func)(struct sk_buff *, struct nlmsghdr *, void *);
typedef int (*rtnl_dumpit_func)(struct sk_buff *, struct netlink_callback *);
-typedef u16 (*rtnl_calcit_func)(struct sk_buff *);
+typedef u16 (*rtnl_calcit_func)(struct sk_buff *, struct nlmsghdr *);
extern int __rtnl_register(int protocol, int msgtype,
rtnl_doit_func, rtnl_dumpit_func,
struct qdisc_skb_cb {
unsigned int pkt_len;
- long data[];
+ unsigned char data[24];
};
+static inline void qdisc_cb_private_validate(const struct sk_buff *skb, int sz)
+{
+ struct qdisc_skb_cb *qcb;
+ BUILD_BUG_ON(sizeof(skb->cb) < sizeof(unsigned int) + sz);
+ BUILD_BUG_ON(sizeof(qcb->data) < sz);
+}
+
static inline int qdisc_qlen(const struct Qdisc *q)
{
return q->q.qlen;
return seq3 - seq2 >= seq1 - seq2;
}
+static inline bool tcp_out_of_memory(struct sock *sk)
+{
+ if (sk->sk_wmem_queued > SOCK_MIN_SNDBUF &&
+ sk_memory_allocated(sk) > sk_prot_mem_limits(sk, 2))
+ return true;
+ return false;
+}
+
static inline bool tcp_too_many_orphans(struct sock *sk, int shift)
{
struct percpu_counter *ocp = sk->sk_prot->orphan_count;
if (orphans << shift > sysctl_tcp_max_orphans)
return true;
}
-
- if (sk->sk_wmem_queued > SOCK_MIN_SNDBUF &&
- sk_memory_allocated(sk) > sk_prot_mem_limits(sk, 2))
- return true;
return false;
}
+extern bool tcp_check_oom(struct sock *sk, int shift);
+
/* syncookies: remember time of last synqueue overflow */
static inline void tcp_synq_overflow(struct sock *sk)
{
int transport_set_vpd_ident(struct t10_vpd *, unsigned char *);
/* core helpers also used by command snooping in pscsi */
-void *transport_kmap_first_data_page(struct se_cmd *);
-void transport_kunmap_first_data_page(struct se_cmd *);
+void *transport_kmap_data_sg(struct se_cmd *);
+void transport_kunmap_data_sg(struct se_cmd *);
#endif /* TARGET_CORE_BACKEND_H */
struct scatterlist *t_data_sg;
unsigned int t_data_nents;
+ void *t_data_vmap;
struct scatterlist *t_bidi_data_sg;
unsigned int t_bidi_data_nents;
struct se_session *, u32, int, int, unsigned char *);
int transport_lookup_cmd_lun(struct se_cmd *, u32);
int transport_generic_allocate_tasks(struct se_cmd *, unsigned char *);
-int target_submit_cmd(struct se_cmd *, struct se_session *, unsigned char *,
+void target_submit_cmd(struct se_cmd *, struct se_session *, unsigned char *,
unsigned char *, u32, u32, int, int, int);
int transport_handle_cdb_direct(struct se_cmd *);
int transport_generic_handle_cdb_map(struct se_cmd *);
(unsigned long long)__entry->vruntime)
);
-#ifdef CREATE_TRACE_POINTS
-static inline u64 trace_get_sleeptime(struct task_struct *tsk)
-{
-#ifdef CONFIG_SCHEDSTATS
- u64 block, sleep;
-
- block = tsk->se.statistics.block_start;
- sleep = tsk->se.statistics.sleep_start;
- tsk->se.statistics.block_start = 0;
- tsk->se.statistics.sleep_start = 0;
-
- return block ? block : sleep ? sleep : 0;
-#else
- return 0;
-#endif
-}
-#endif
-
-/*
- * Tracepoint for accounting sleeptime (time the task is sleeping
- * or waiting for I/O).
- */
-TRACE_EVENT(sched_stat_sleeptime,
-
- TP_PROTO(struct task_struct *tsk, u64 now),
-
- TP_ARGS(tsk, now),
-
- TP_STRUCT__entry(
- __array( char, comm, TASK_COMM_LEN )
- __field( pid_t, pid )
- __field( u64, sleeptime )
- ),
-
- TP_fast_assign(
- memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
- __entry->pid = tsk->pid;
- __entry->sleeptime = trace_get_sleeptime(tsk);
- __entry->sleeptime = __entry->sleeptime ?
- now - __entry->sleeptime : 0;
- )
- TP_perf_assign(
- __perf_count(__entry->sleeptime);
- ),
-
- TP_printk("comm=%s pid=%d sleeptime=%Lu [ns]",
- __entry->comm, __entry->pid,
- (unsigned long long)__entry->sleeptime)
-);
-
/*
* Tracepoint for showing priority inheritance modifying a tasks
* priority.
__field(int, reason)
),
TP_fast_assign(
- strncpy(__entry->name, dev_name(bdi->dev), 32);
+ struct device *dev = bdi->dev;
+ if (!dev)
+ dev = default_backing_dev_info.dev;
+ strncpy(__entry->name, dev_name(dev), 32);
__entry->nr_pages = work->nr_pages;
__entry->sb_dev = work->sb ? work->sb->s_dev : 0;
__entry->sync_mode = work->sync_mode;
TP_fast_assign(
strncpy(__entry->name,
- dev_name(inode->i_mapping->backing_dev_info->dev), 32);
+ dev_name(inode_to_bdi(inode)->dev), 32);
__entry->ino = inode->i_ino;
__entry->state = inode->i_state;
__entry->dirtied_when = inode->dirtied_when;
int (*get_backlight)(struct omap_dss_device *dssdev);
};
+struct omap_dss_hdmi_data
+{
+ int hpd_gpio;
+};
+
struct omap_dss_driver {
struct device_driver driver;
static DEFINE_PER_CPU(int, perf_throttled_count);
static DEFINE_PER_CPU(u64, perf_throttled_seq);
-static void perf_adjust_period(struct perf_event *event, u64 nsec, u64 count)
+static void perf_adjust_period(struct perf_event *event, u64 nsec, u64 count, bool disable)
{
struct hw_perf_event *hwc = &event->hw;
s64 period, sample_period;
hwc->sample_period = sample_period;
if (local64_read(&hwc->period_left) > 8*sample_period) {
- event->pmu->stop(event, PERF_EF_UPDATE);
+ if (disable)
+ event->pmu->stop(event, PERF_EF_UPDATE);
+
local64_set(&hwc->period_left, 0);
- event->pmu->start(event, PERF_EF_RELOAD);
+
+ if (disable)
+ event->pmu->start(event, PERF_EF_RELOAD);
}
}
return;
raw_spin_lock(&ctx->lock);
+ perf_pmu_disable(ctx->pmu);
list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
if (event->state != PERF_EVENT_STATE_ACTIVE)
/*
* restart the event
* reload only if value has changed
+ * we have stopped the event so tell that
+ * to perf_adjust_period() to avoid stopping it
+ * twice.
*/
if (delta > 0)
- perf_adjust_period(event, period, delta);
+ perf_adjust_period(event, period, delta, false);
event->pmu->start(event, delta > 0 ? PERF_EF_RELOAD : 0);
}
+ perf_pmu_enable(ctx->pmu);
raw_spin_unlock(&ctx->lock);
}
hwc->freq_time_stamp = now;
if (delta > 0 && delta < 2*TICK_NSEC)
- perf_adjust_period(event, delta, hwc->last_period);
+ perf_adjust_period(event, delta, hwc->last_period, true);
}
/*
err_alloc:
for_each_possible_cpu(err_cpu) {
- if (err_cpu == cpu)
- break;
for (i = 0; i < TYPE_MAX; i++)
kfree(per_cpu(nr_task_bp_pinned[i], cpu));
+ if (err_cpu == cpu)
+ break;
}
return -ENOMEM;
#include <linux/user-return-notifier.h>
#include <linux/oom.h>
#include <linux/khugepaged.h>
+#include <linux/signalfd.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
return -ENOMEM;
new_ioc->ioprio = ioc->ioprio;
- put_io_context(new_ioc, NULL);
+ put_io_context(new_ioc);
}
#endif
return 0;
void __cleanup_sighand(struct sighand_struct *sighand)
{
- if (atomic_dec_and_test(&sighand->count))
+ if (atomic_dec_and_test(&sighand->count)) {
+ signalfd_cleanup(sighand);
kmem_cache_free(sighand_cachep, sighand);
+ }
}
if (desc->irq_data.chip->irq_set_type)
desc->irq_data.chip->irq_set_type(&desc->irq_data,
IRQ_TYPE_PROBE);
- irq_startup(desc);
+ irq_startup(desc, false);
}
raw_spin_unlock_irq(&desc->lock);
}
raw_spin_lock_irq(&desc->lock);
if (!desc->action && irq_settings_can_probe(desc)) {
desc->istate |= IRQS_AUTODETECT | IRQS_WAITING;
- if (irq_startup(desc))
+ if (irq_startup(desc, false))
desc->istate |= IRQS_PENDING;
}
raw_spin_unlock_irq(&desc->lock);
irqd_set(&desc->irq_data, IRQD_IRQ_MASKED);
}
-int irq_startup(struct irq_desc *desc)
+int irq_startup(struct irq_desc *desc, bool resend)
{
+ int ret = 0;
+
irq_state_clr_disabled(desc);
desc->depth = 0;
if (desc->irq_data.chip->irq_startup) {
- int ret = desc->irq_data.chip->irq_startup(&desc->irq_data);
+ ret = desc->irq_data.chip->irq_startup(&desc->irq_data);
irq_state_clr_masked(desc);
- return ret;
+ } else {
+ irq_enable(desc);
}
-
- irq_enable(desc);
- return 0;
+ if (resend)
+ check_irq_resend(desc, desc->irq_data.irq);
+ return ret;
}
void irq_shutdown(struct irq_desc *desc)
}
EXPORT_SYMBOL_GPL(handle_simple_irq);
+/*
+ * Called unconditionally from handle_level_irq() and only for oneshot
+ * interrupts from handle_fasteoi_irq()
+ */
+static void cond_unmask_irq(struct irq_desc *desc)
+{
+ /*
+ * We need to unmask in the following cases:
+ * - Standard level irq (IRQF_ONESHOT is not set)
+ * - Oneshot irq which did not wake the thread (caused by a
+ * spurious interrupt or a primary handler handling it
+ * completely).
+ */
+ if (!irqd_irq_disabled(&desc->irq_data) &&
+ irqd_irq_masked(&desc->irq_data) && !desc->threads_oneshot)
+ unmask_irq(desc);
+}
+
/**
* handle_level_irq - Level type irq handler
* @irq: the interrupt number
handle_irq_event(desc);
- if (!irqd_irq_disabled(&desc->irq_data) && !(desc->istate & IRQS_ONESHOT))
- unmask_irq(desc);
+ cond_unmask_irq(desc);
+
out_unlock:
raw_spin_unlock(&desc->lock);
}
preflow_handler(desc);
handle_irq_event(desc);
+ if (desc->istate & IRQS_ONESHOT)
+ cond_unmask_irq(desc);
+
out_eoi:
desc->irq_data.chip->irq_eoi(&desc->irq_data);
out_unlock:
irq_settings_set_noprobe(desc);
irq_settings_set_norequest(desc);
irq_settings_set_nothread(desc);
- irq_startup(desc);
+ irq_startup(desc, true);
}
out:
irq_put_desc_busunlock(desc, flags);
extern void __disable_irq(struct irq_desc *desc, unsigned int irq, bool susp);
extern void __enable_irq(struct irq_desc *desc, unsigned int irq, bool resume);
-extern int irq_startup(struct irq_desc *desc);
+extern int irq_startup(struct irq_desc *desc, bool resend);
extern void irq_shutdown(struct irq_desc *desc);
extern void irq_enable(struct irq_desc *desc);
extern void irq_disable(struct irq_desc *desc);
desc->istate |= IRQS_ONESHOT;
if (irq_settings_can_autoenable(desc))
- irq_startup(desc);
+ irq_startup(desc, true);
else
/* Undo nested disables: */
desc->depth = 1;
ri->rp = rp;
ri->task = current;
- if (rp->entry_handler && rp->entry_handler(ri, regs))
+ if (rp->entry_handler && rp->entry_handler(ri, regs)) {
+ raw_spin_lock_irqsave(&rp->lock, flags);
+ hlist_add_head(&ri->hlist, &rp->free_instances);
+ raw_spin_unlock_irqrestore(&rp->lock, flags);
return 0;
+ }
arch_prepare_kretprobe(ri, regs);
for (i = 0; i < num_params; i++) {
if (parameq(param, params[i].name)) {
/* No one handled NULL, so do it here. */
- if (!val && params[i].ops->set != param_set_bool)
+ if (!val && params[i].ops->set != param_set_bool
+ && params[i].ops->set != param_set_bint)
return -EINVAL;
pr_debug("They are equal! Calling %p\n",
params[i].ops->set);
*/
void __init pidhash_init(void)
{
- int i, pidhash_size;
+ unsigned int i, pidhash_size;
pid_hash = alloc_large_system_hash("PID", sizeof(*pid_hash), 0, 18,
HASH_EARLY | HASH_SMALL,
&pidhash_shift, NULL, 4096);
- pidhash_size = 1 << pidhash_shift;
+ pidhash_size = 1U << pidhash_shift;
for (i = 0; i < pidhash_size; i++)
INIT_HLIST_HEAD(&pid_hash[i]);
#ifdef CONFIG_SUSPEND_FREEZER
static inline int suspend_freeze_processes(void)
{
- int error = freeze_processes();
- return error ? : freeze_kernel_threads();
+ int error;
+
+ error = freeze_processes();
+
+ /*
+ * freeze_processes() automatically thaws every task if freezing
+ * fails. So we need not do anything extra upon error.
+ */
+ if (error)
+ goto Finish;
+
+ error = freeze_kernel_threads();
+
+ /*
+ * freeze_kernel_threads() thaws only kernel threads upon freezing
+ * failure. So we have to thaw the userspace tasks ourselves.
+ */
+ if (error)
+ thaw_processes();
+
+ Finish:
+ return error;
}
static inline void suspend_thaw_processes(void)
/**
* freeze_kernel_threads - Make freezable kernel threads go to the refrigerator.
*
- * On success, returns 0. On failure, -errno and system is fully thawed.
+ * On success, returns 0. On failure, -errno and only the kernel threads are
+ * thawed, so as to give a chance to the caller to do additional cleanups
+ * (if any) before thawing the userspace tasks. So, it is the responsibility
+ * of the caller to thaw the userspace tasks, when the time is right.
*/
int freeze_kernel_threads(void)
{
BUG_ON(in_atomic());
if (error)
- thaw_processes();
+ thaw_kernel_threads();
return error;
}
}
pm_restore_gfp_mask();
error = hibernation_snapshot(data->platform_support);
- if (!error) {
+ if (error) {
+ thaw_kernel_threads();
+ } else {
error = put_user(in_suspend, (int __user *)arg);
if (!error && !freezer_test_done)
data->ready = 1;
if (freezer_test_done) {
freezer_test_done = false;
- thaw_processes();
+ thaw_kernel_threads();
}
}
break;
*/
static struct rchan_buf *relay_create_buf(struct rchan *chan)
{
- struct rchan_buf *buf = kzalloc(sizeof(struct rchan_buf), GFP_KERNEL);
- if (!buf)
+ struct rchan_buf *buf;
+
+ if (chan->n_subbufs > UINT_MAX / sizeof(size_t *))
return NULL;
+ buf = kzalloc(sizeof(struct rchan_buf), GFP_KERNEL);
+ if (!buf)
+ return NULL;
buf->padding = kmalloc(chan->n_subbufs * sizeof(size_t *), GFP_KERNEL);
if (!buf->padding)
goto free_buf;
if (!(subbuf_size && n_subbufs))
return NULL;
+ if (subbuf_size > UINT_MAX / n_subbufs)
+ return NULL;
chan = kzalloc(sizeof(struct rchan), GFP_KERNEL);
if (!chan)
local_irq_enable();
#endif /* __ARCH_WANT_INTERRUPTS_ON_CTXSW */
finish_lock_switch(rq, prev);
- trace_sched_stat_sleeptime(current, rq->clock);
fire_sched_in_preempt_notifiers(current);
if (mm)
static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
- switch (action & ~CPU_TASKS_FROZEN) {
+ switch (action) {
case CPU_ONLINE:
case CPU_DOWN_FAILED:
cpuset_update_active_cpus();
static int cpuset_cpu_inactive(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
- switch (action & ~CPU_TASKS_FROZEN) {
+ switch (action) {
case CPU_DOWN_PREPARE:
cpuset_update_active_cpus();
return NOTIFY_OK;
if (unlikely(delta > se->statistics.sleep_max))
se->statistics.sleep_max = delta;
+ se->statistics.sleep_start = 0;
se->statistics.sum_sleep_runtime += delta;
if (tsk) {
if (unlikely(delta > se->statistics.block_max))
se->statistics.block_max = delta;
+ se->statistics.block_start = 0;
se->statistics.sum_sleep_runtime += delta;
if (tsk) {
config GENERIC_FIND_FIRST_BIT
bool
+config NO_GENERIC_PCI_IOPORT_MAP
+ bool
+
config GENERIC_PCI_IOMAP
bool
*
* Don't you dare use this function.
*/
-unsigned int _parse_integer(const char *s, unsigned int base, unsigned long long *res)
+unsigned int _parse_integer(const char *s, unsigned int base, unsigned long long *p)
{
+ unsigned long long res;
unsigned int rv;
int overflow;
- *res = 0;
+ res = 0;
rv = 0;
overflow = 0;
while (*s) {
if (val >= base)
break;
- if (*res > div_u64(ULLONG_MAX - val, base))
- overflow = 1;
- *res = *res * base + val;
+ /*
+ * Check for overflow only if we are within range of
+ * it in the max base we support (16)
+ */
+ if (unlikely(res & (~0ull << 60))) {
+ if (res > div_u64(ULLONG_MAX - val, base))
+ overflow = 1;
+ }
+ res = res * base + val;
rv++;
s++;
}
+ *p = res;
if (overflow)
rv |= KSTRTOX_OVERFLOW;
return rv;
if (maxlen && len > maxlen)
len = maxlen;
if (flags & IORESOURCE_IO)
- return ioport_map(start, len);
+ return __pci_ioport_map(dev, start, len);
if (flags & IORESOURCE_MEM) {
if (flags & IORESOURCE_CACHEABLE)
return ioremap(start, len);
if (bdi->wb.task) {
trace_writeback_wake_thread(bdi);
wake_up_process(bdi->wb.task);
- } else {
+ } else if (bdi->dev) {
/*
* When bdi tasks are inactive for long time, they are killed.
* In this case we have to wake-up the forker thread which
*/
static void bdi_wb_shutdown(struct backing_dev_info *bdi)
{
+ struct task_struct *task;
+
if (!bdi_cap_writeback_dirty(bdi))
return;
* Finally, kill the kernel thread. We don't need to be RCU
* safe anymore, since the bdi is gone from visibility.
*/
- if (bdi->wb.task)
- kthread_stop(bdi->wb.task);
+ spin_lock_bh(&bdi->wb_lock);
+ task = bdi->wb.task;
+ bdi->wb.task = NULL;
+ spin_unlock_bh(&bdi->wb_lock);
+
+ if (task)
+ kthread_stop(task);
}
/*
void bdi_unregister(struct backing_dev_info *bdi)
{
- if (bdi->dev) {
+ struct device *dev = bdi->dev;
+
+ if (dev) {
bdi_set_min_ratio(bdi, 0);
trace_writeback_bdi_unregister(bdi);
bdi_prune_sb(bdi);
if (!bdi_cap_flush_forker(bdi))
bdi_wb_shutdown(bdi);
bdi_debug_unregister(bdi);
- device_unregister(bdi->dev);
+
+ spin_lock_bh(&bdi->wb_lock);
bdi->dev = NULL;
+ spin_unlock_bh(&bdi->wb_lock);
+
+ device_unregister(dev);
}
}
EXPORT_SYMBOL(bdi_unregister);
} else if (!locked)
spin_lock_irq(&zone->lru_lock);
+ /*
+ * migrate_pfn does not necessarily start aligned to a
+ * pageblock. Ensure that pfn_valid is called when moving
+ * into a new MAX_ORDER_NR_PAGES range in case of large
+ * memory holes within the zone
+ */
+ if ((low_pfn & (MAX_ORDER_NR_PAGES - 1)) == 0) {
+ if (!pfn_valid(low_pfn)) {
+ low_pfn += MAX_ORDER_NR_PAGES - 1;
+ continue;
+ }
+ }
+
if (!pfn_valid_within(low_pfn))
continue;
nr_scanned++;
- /* Get the page and skip if free */
+ /*
+ * Get the page and ensure the page is within the same zone.
+ * See the comment in isolate_freepages about overlapping
+ * nodes. It is deliberate that the new zone lock is not taken
+ * as memory compaction should not move pages between nodes.
+ */
page = pfn_to_page(low_pfn);
+ if (page_zone(page) != zone)
+ continue;
+
+ /* Skip if free */
if (PageBuddy(page))
continue;
unsigned long seg = 0;
size_t count;
loff_t *ppos = &iocb->ki_pos;
- struct blk_plug plug;
count = 0;
retval = generic_segment_checks(iov, &nr_segs, &count, VERIFY_WRITE);
if (retval)
return retval;
- blk_start_plug(&plug);
-
/* coalesce the iovecs and go direct-to-BIO for O_DIRECT */
if (filp->f_flags & O_DIRECT) {
loff_t size;
retval = filemap_write_and_wait_range(mapping, pos,
pos + iov_length(iov, nr_segs) - 1);
if (!retval) {
+ struct blk_plug plug;
+
+ blk_start_plug(&plug);
retval = mapping->a_ops->direct_IO(READ, iocb,
iov, pos, nr_segs);
+ blk_finish_plug(&plug);
}
if (retval > 0) {
*ppos = pos + retval;
break;
}
out:
- blk_finish_plug(&plug);
return retval;
}
EXPORT_SYMBOL(generic_file_aio_read);
xip_pfn);
if (err == -ENOMEM)
return VM_FAULT_OOM;
- BUG_ON(err);
+ /*
+ * err == -EBUSY is fine, we've raced against another thread
+ * that faulted-in the same page
+ */
+ if (err != -EBUSY)
+ BUG_ON(err);
return VM_FAULT_NOPAGE;
} else {
int err, ret = VM_FAULT_OOM;
{
struct mm_struct *mm = mm_slot->mm;
- VM_BUG_ON(!spin_is_locked(&khugepaged_mm_lock));
+ VM_BUG_ON(NR_CPUS != 1 && !spin_is_locked(&khugepaged_mm_lock));
if (khugepaged_test_exit(mm)) {
/* free mm_slot */
int progress = 0;
VM_BUG_ON(!pages);
- VM_BUG_ON(!spin_is_locked(&khugepaged_mm_lock));
+ VM_BUG_ON(NR_CPUS != 1 && !spin_is_locked(&khugepaged_mm_lock));
if (khugepaged_scan.mm_slot)
mm_slot = khugepaged_scan.mm_slot;
phys_addr_t this_start, this_end, cand;
u64 i;
- /* align @size to avoid excessive fragmentation on reserved array */
- size = round_up(size, align);
-
/* pump up @end */
if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
end = memblock.current_limit;
{
phys_addr_t found;
+ /* align @size to avoid excessive fragmentation on reserved array */
+ size = round_up(size, align);
+
found = memblock_find_in_range_node(0, max_addr, size, align, nid);
if (found && !memblock_reserve(found, size))
return found;
/* threshold event is triggered in finer grain than soft limit */
if (unlikely(mem_cgroup_event_ratelimit(memcg,
MEM_CGROUP_TARGET_THRESH))) {
- bool do_softlimit, do_numainfo;
+ bool do_softlimit;
+ bool do_numainfo __maybe_unused;
do_softlimit = mem_cgroup_event_ratelimit(memcg,
MEM_CGROUP_TARGET_SOFTLIMIT);
*/
BUG_ON(!thresholds);
+ if (!thresholds->primary)
+ goto unlock;
+
usage = mem_cgroup_usage(memcg, type == _MEMSWAP);
/* Check if a threshold crossed before removing */
/* To be sure that nobody uses thresholds */
synchronize_rcu();
-
+unlock:
mutex_unlock(&memcg->thresholds_lock);
}
ClearPageSwapCache(page);
ClearPagePrivate(page);
set_page_private(page, 0);
- page->mapping = NULL;
/*
* If any waiters have accumulated on the new page then
} else {
if (remap_swapcache)
remove_migration_ptes(page, newpage);
+ page->mapping = NULL;
}
unlock_page(newpage);
if (vma->vm_file) {
mapping = vma->vm_file->f_mapping;
+ mutex_lock(&mapping->i_mmap_mutex);
flush_dcache_mmap_lock(mapping);
vma_prio_tree_insert(vma, &mapping->i_mmap);
flush_dcache_mmap_unlock(mapping);
+ mutex_unlock(&mapping->i_mmap_mutex);
}
/* add the VMA to the tree */
if (vma->vm_file) {
mapping = vma->vm_file->f_mapping;
+ mutex_lock(&mapping->i_mmap_mutex);
flush_dcache_mmap_lock(mapping);
vma_prio_tree_remove(vma, &mapping->i_mmap);
flush_dcache_mmap_unlock(mapping);
+ mutex_unlock(&mapping->i_mmap_mutex);
}
/* remove from the MM's tree and list */
if (vma->vm_next)
vma->vm_next->vm_prev = vma->vm_prev;
-
- vma->vm_mm = NULL;
}
/*
high = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
down_write(&nommu_region_sem);
+ mutex_lock(&inode->i_mapping->i_mmap_mutex);
/* search for VMAs that fall within the dead zone */
vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
/* found one - only interested if it's shared out of the page
* cache */
if (vma->vm_flags & VM_SHARED) {
+ mutex_unlock(&inode->i_mapping->i_mmap_mutex);
up_write(&nommu_region_sem);
return -ETXTBSY; /* not quite true, but near enough */
}
}
}
+ mutex_unlock(&inode->i_mapping->i_mmap_mutex);
up_write(&nommu_region_sem);
return 0;
}
max = ((unsigned long long)nr_all_pages << PAGE_SHIFT) >> 4;
do_div(max, bucketsize);
}
+ max = min(max, 0x80000000ULL);
if (numentries > max)
numentries = max;
VM_BUG_ON(!PageHead(page));
VM_BUG_ON(PageCompound(page_tail));
VM_BUG_ON(PageLRU(page_tail));
- VM_BUG_ON(!spin_is_locked(&zone->lru_lock));
+ VM_BUG_ON(NR_CPUS != 1 && !spin_is_locked(&zone->lru_lock));
SetPageLRU(page_tail);
static struct net_device *clip_devs;
static struct atm_vcc *atmarpd;
-static struct neigh_table clip_tbl;
static struct timer_list idle_timer;
+static const struct neigh_ops clip_neigh_ops;
static int to_atmarpd(enum atmarp_ctrl_type type, int itf, __be32 ip)
{
struct atmarp_entry *entry = neighbour_priv(n);
struct clip_vcc *cv;
+ if (n->ops != &clip_neigh_ops)
+ return 0;
for (cv = entry->vccs; cv; cv = cv->next) {
unsigned long exp = cv->last_use + cv->idle_timeout;
static void idle_timer_check(unsigned long dummy)
{
- write_lock(&clip_tbl.lock);
- __neigh_for_each_release(&clip_tbl, neigh_check_cb);
+ write_lock(&arp_tbl.lock);
+ __neigh_for_each_release(&arp_tbl, neigh_check_cb);
mod_timer(&idle_timer, jiffies + CLIP_CHECK_INTERVAL * HZ);
- write_unlock(&clip_tbl.lock);
+ write_unlock(&arp_tbl.lock);
}
static int clip_arp_rcv(struct sk_buff *skb)
"slock-AF_BLUETOOTH-BTPROTO_AVDTP",
};
-static inline void bt_sock_reclassify_lock(struct socket *sock, int proto)
+void bt_sock_reclassify_lock(struct sock *sk, int proto)
{
- struct sock *sk = sock->sk;
-
- if (!sk)
- return;
-
+ BUG_ON(!sk);
BUG_ON(sock_owned_by_user(sk));
sock_lock_init_class_and_name(sk,
bt_slock_key_strings[proto], &bt_slock_key[proto],
bt_key_strings[proto], &bt_lock_key[proto]);
}
+EXPORT_SYMBOL(bt_sock_reclassify_lock);
int bt_sock_register(int proto, const struct net_proto_family *ops)
{
if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) {
err = bt_proto[proto]->create(net, sock, proto, kern);
- bt_sock_reclassify_lock(sock, proto);
+ if (!err)
+ bt_sock_reclassify_lock(sock->sk, proto);
module_put(bt_proto[proto]->owner);
}
if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->pend)) {
struct hci_cp_auth_requested cp;
+
+ /* encrypt must be pending if auth is also pending */
+ set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend);
+
cp.handle = cpu_to_le16(conn->handle);
hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED,
sizeof(cp), &cp);
/* Reset device */
skb_queue_purge(&hdev->cmd_q);
atomic_set(&hdev->cmd_cnt, 1);
- if (!test_bit(HCI_RAW, &hdev->flags)) {
+ if (!test_bit(HCI_RAW, &hdev->flags) &&
+ test_bit(HCI_QUIRK_NO_RESET, &hdev->quirks)) {
set_bit(HCI_INIT, &hdev->flags);
__hci_request(hdev, hci_reset_req, 0,
msecs_to_jiffies(250));
hci_chan_del(conn->hchan);
if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT)
- __cancel_delayed_work(&conn->info_timer);
+ cancel_delayed_work_sync(&conn->info_timer);
if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &hcon->pend)) {
- __cancel_delayed_work(&conn->security_timer);
+ cancel_delayed_work_sync(&conn->security_timer);
smp_chan_destroy(conn);
}
return c1;
}
-inline int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid, bdaddr_t *dst)
+int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid, bdaddr_t *dst)
{
struct sock *sk = chan->sk;
bdaddr_t *src = &bt_sk(sk)->src;
if ((conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT) &&
cmd->ident == conn->info_ident) {
- __cancel_delayed_work(&conn->info_timer);
+ cancel_delayed_work(&conn->info_timer);
conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
conn->info_ident = 0;
default:
sk->sk_err = ECONNRESET;
- __set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT);
+ __set_chan_timer(chan,
+ msecs_to_jiffies(L2CAP_DISC_REJ_TIMEOUT));
l2cap_send_disconn_req(conn, chan, ECONNRESET);
goto done;
}
conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE)
return 0;
- __cancel_delayed_work(&conn->info_timer);
+ cancel_delayed_work(&conn->info_timer);
if (result != L2CAP_IR_SUCCESS) {
conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
if (encrypt == 0x00) {
if (chan->sec_level == BT_SECURITY_MEDIUM) {
__clear_chan_timer(chan);
- __set_chan_timer(chan, L2CAP_ENC_TIMEOUT);
+ __set_chan_timer(chan,
+ msecs_to_jiffies(L2CAP_ENC_TIMEOUT));
} else if (chan->sec_level == BT_SECURITY_HIGH)
l2cap_chan_close(chan, ECONNREFUSED);
} else {
if (hcon->type == LE_LINK) {
smp_distribute_keys(conn, 0);
- __cancel_delayed_work(&conn->security_timer);
+ cancel_delayed_work(&conn->security_timer);
}
rcu_read_lock();
L2CAP_CONN_REQ, sizeof(req), &req);
} else {
__clear_chan_timer(chan);
- __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
+ __set_chan_timer(chan,
+ msecs_to_jiffies(L2CAP_DISC_TIMEOUT));
}
} else if (chan->state == BT_CONNECT2) {
struct l2cap_conn_rsp rsp;
}
} else {
l2cap_state_change(chan, BT_DISCONN);
- __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
+ __set_chan_timer(chan,
+ msecs_to_jiffies(L2CAP_DISC_TIMEOUT));
res = L2CAP_CR_SEC_BLOCK;
stat = L2CAP_CS_NO_INFO;
}
if (!sk)
return NULL;
+ bt_sock_reclassify_lock(sk, BTPROTO_L2CAP);
+
l2cap_sock_init(sk, parent);
return l2cap_pi(sk)->chan;
INIT_LIST_HEAD(&bt_sk(sk)->accept_q);
sk->sk_destruct = l2cap_sock_destruct;
- sk->sk_sndtimeo = L2CAP_CONN_TIMEOUT;
+ sk->sk_sndtimeo = msecs_to_jiffies(L2CAP_CONN_TIMEOUT);
sock_reset_flag(sk, SOCK_ZAPPED);
break;
case BT_DISCONN:
- /* When socket is closed and we are not RFCOMM
- * initiator rfcomm_process_rx already calls
- * rfcomm_session_put() */
- if (s->sock->sk->sk_state != BT_CLOSED)
- if (list_empty(&s->dlcs))
- rfcomm_session_put(s);
+ /* rfcomm_session_put is called later so don't do
+ * anything here otherwise we will mess up the session
+ * reference counter:
+ *
+ * (a) when we are the initiator dlc_unlink will drive
+ * the reference counter to 0 (there is no initial put
+ * after session_add)
+ *
+ * (b) when we are not the initiator rfcomm_rx_process
+ * will explicitly call put to balance the initial hold
+ * done after session add.
+ */
break;
}
}
if (!sk)
goto done;
+ bt_sock_reclassify_lock(sk, BTPROTO_RFCOMM);
+
rfcomm_sock_init(sk, parent);
bacpy(&bt_sk(sk)->src, &src);
bacpy(&bt_sk(sk)->dst, &dst);
pkt = cfpkt_fromnative(CAIF_DIR_OUT, skb);
memset(skb->cb, 0, sizeof(struct caif_payload_info));
- if (cf_sk->layer.dn == NULL)
+ if (cf_sk->layer.dn == NULL) {
+ kfree_skb(skb);
return -EINVAL;
+ }
return cf_sk->layer.dn->transmit(cf_sk->layer.dn, pkt);
}
}
err = transmit_skb(skb, cf_sk,
msg->msg_flags&MSG_DONTWAIT, timeo);
- if (err < 0) {
- kfree_skb(skb);
+ if (err < 0)
+ /* skb is already freed */
goto pipe_err;
- }
+
sent += size;
}
{
struct cfmuxl *muxl = container_obj(layr);
struct cflayer *layer;
- int idx;
rcu_read_lock();
list_for_each_entry_rcu(layer, &muxl->srvl_list, node) {
if ((ctrl == _CAIF_CTRLCMD_PHYIF_DOWN_IND ||
ctrl == CAIF_CTRLCMD_REMOTE_SHUTDOWN_IND) &&
- layer->id != 0) {
-
- idx = layer->id % UP_CACHE_SIZE;
- spin_lock_bh(&muxl->receive_lock);
- RCU_INIT_POINTER(muxl->up_cache[idx], NULL);
- list_del_rcu(&layer->node);
- spin_unlock_bh(&muxl->receive_lock);
- }
+ layer->id != 0)
+ cfmuxl_remove_uplayer(layr, layer->id);
+
/* NOTE: ctrlcmd is not allowed to block */
layer->ctrlcmd(layer, ctrl, phyid);
}
__napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
{
struct sk_buff *p;
+ unsigned int maclen = skb->dev->hard_header_len;
for (p = napi->gro_list; p; p = p->next) {
unsigned long diffs;
diffs = (unsigned long)p->dev ^ (unsigned long)skb->dev;
diffs |= p->vlan_tci ^ skb->vlan_tci;
- diffs |= compare_ether_header(skb_mac_header(p),
- skb_gro_mac_header(skb));
+ if (maclen == ETH_HLEN)
+ diffs |= compare_ether_header(skb_mac_header(p),
+ skb_gro_mac_header(skb));
+ else if (!diffs)
+ diffs = memcmp(skb_mac_header(p),
+ skb_gro_mac_header(skb),
+ maclen);
NAPI_GRO_CB(p)->same_flow = !diffs;
NAPI_GRO_CB(p)->flush = 0;
}
if (!dev->ethtool_ops->flash_device)
return -EOPNOTSUPP;
+ efl.data[ETHTOOL_FLASH_MAX_FILENAME - 1] = 0;
+
return dev->ethtool_ops->flash_device(dev, &efl);
}
write_unlock_bh(&tbl->lock);
cond_resched();
write_lock_bh(&tbl->lock);
+ nht = rcu_dereference_protected(tbl->nht,
+ lockdep_is_held(&tbl->lock));
}
/* Cycle through all hash buckets every base_reachable_time/2 ticks.
* ARP entry timeouts range from 1/2 base_reachable_time to 3/2
poll_napi(dev);
- if (dev->priv_flags & IFF_SLAVE) {
+ if (dev->flags & IFF_SLAVE) {
if (dev->npinfo) {
struct net_device *bond_dev = dev->master;
struct sk_buff *skb;
spin_lock_irqsave(&prioidx_map_lock, flags);
prioidx = find_first_zero_bit(prioidx_map, sizeof(unsigned long) * PRIOIDX_SZ);
+ if (prioidx == sizeof(unsigned long) * PRIOIDX_SZ) {
+ spin_unlock_irqrestore(&prioidx_map_lock, flags);
+ return -ENOSPC;
+ }
set_bit(prioidx, prioidx_map);
spin_unlock_irqrestore(&prioidx_map_lock, flags);
- if (prioidx == sizeof(unsigned long) * PRIOIDX_SZ)
- return -ENOSPC;
-
atomic_set(&max_prioidx, prioidx);
*prio = prioidx;
return 0;
static void update_netdev_tables(void)
{
struct net_device *dev;
- u32 max_len = atomic_read(&max_prioidx);
+ u32 max_len = atomic_read(&max_prioidx) + 1;
struct netprio_map *map;
rtnl_lock();
{
struct net_device *dev = ptr;
struct netprio_map *old;
- u32 max_len = atomic_read(&max_prioidx);
/*
* Note this is called with rtnl_lock held so we have update side
*/
switch (event) {
-
- case NETDEV_REGISTER:
- if (max_len)
- extend_netdev_table(dev, max_len);
- break;
case NETDEV_UNREGISTER:
old = rtnl_dereference(dev->priomap);
RCU_INIT_POINTER(dev->priomap, NULL);
};
static DEFINE_MUTEX(rtnl_mutex);
-static u16 min_ifinfo_dump_size;
void rtnl_lock(void)
{
}
/* All VF info */
-static inline int rtnl_vfinfo_size(const struct net_device *dev)
+static inline int rtnl_vfinfo_size(const struct net_device *dev,
+ u32 ext_filter_mask)
{
- if (dev->dev.parent && dev_is_pci(dev->dev.parent)) {
-
+ if (dev->dev.parent && dev_is_pci(dev->dev.parent) &&
+ (ext_filter_mask & RTEXT_FILTER_VF)) {
int num_vfs = dev_num_vf(dev->dev.parent);
size_t size = nla_total_size(sizeof(struct nlattr));
size += nla_total_size(num_vfs * sizeof(struct nlattr));
return port_self_size;
}
-static noinline size_t if_nlmsg_size(const struct net_device *dev)
+static noinline size_t if_nlmsg_size(const struct net_device *dev,
+ u32 ext_filter_mask)
{
return NLMSG_ALIGN(sizeof(struct ifinfomsg))
+ nla_total_size(IFNAMSIZ) /* IFLA_IFNAME */
+ nla_total_size(4) /* IFLA_MASTER */
+ nla_total_size(1) /* IFLA_OPERSTATE */
+ nla_total_size(1) /* IFLA_LINKMODE */
- + nla_total_size(4) /* IFLA_NUM_VF */
- + rtnl_vfinfo_size(dev) /* IFLA_VFINFO_LIST */
+ + nla_total_size(ext_filter_mask
+ & RTEXT_FILTER_VF ? 4 : 0) /* IFLA_NUM_VF */
+ + rtnl_vfinfo_size(dev, ext_filter_mask) /* IFLA_VFINFO_LIST */
+ rtnl_port_size(dev) /* IFLA_VF_PORTS + IFLA_PORT_SELF */
+ rtnl_link_get_size(dev) /* IFLA_LINKINFO */
+ rtnl_link_get_af_size(dev); /* IFLA_AF_SPEC */
static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
int type, u32 pid, u32 seq, u32 change,
- unsigned int flags)
+ unsigned int flags, u32 ext_filter_mask)
{
struct ifinfomsg *ifm;
struct nlmsghdr *nlh;
goto nla_put_failure;
copy_rtnl_link_stats64(nla_data(attr), stats);
- if (dev->dev.parent)
+ if (dev->dev.parent && (ext_filter_mask & RTEXT_FILTER_VF))
NLA_PUT_U32(skb, IFLA_NUM_VF, dev_num_vf(dev->dev.parent));
- if (dev->netdev_ops->ndo_get_vf_config && dev->dev.parent) {
+ if (dev->netdev_ops->ndo_get_vf_config && dev->dev.parent
+ && (ext_filter_mask & RTEXT_FILTER_VF)) {
int i;
struct nlattr *vfinfo, *vf;
struct net_device *dev;
struct hlist_head *head;
struct hlist_node *node;
+ struct nlattr *tb[IFLA_MAX+1];
+ u32 ext_filter_mask = 0;
s_h = cb->args[0];
s_idx = cb->args[1];
rcu_read_lock();
cb->seq = net->dev_base_seq;
+ nlmsg_parse(cb->nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX,
+ ifla_policy);
+
+ if (tb[IFLA_EXT_MASK])
+ ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+
for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
idx = 0;
head = &net->dev_index_head[h];
if (rtnl_fill_ifinfo(skb, dev, RTM_NEWLINK,
NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, 0,
- NLM_F_MULTI) <= 0)
+ NLM_F_MULTI,
+ ext_filter_mask) <= 0)
goto out;
nl_dump_check_consistent(cb, nlmsg_hdr(skb));
[IFLA_VF_PORTS] = { .type = NLA_NESTED },
[IFLA_PORT_SELF] = { .type = NLA_NESTED },
[IFLA_AF_SPEC] = { .type = NLA_NESTED },
+ [IFLA_EXT_MASK] = { .type = NLA_U32 },
};
EXPORT_SYMBOL(ifla_policy);
if (send_addr_notify)
call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
- min_ifinfo_dump_size = max_t(u16, if_nlmsg_size(dev),
- min_ifinfo_dump_size);
return err;
}
struct net_device *dev = NULL;
struct sk_buff *nskb;
int err;
+ u32 ext_filter_mask = 0;
err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFLA_MAX, ifla_policy);
if (err < 0)
if (tb[IFLA_IFNAME])
nla_strlcpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
+ if (tb[IFLA_EXT_MASK])
+ ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+
ifm = nlmsg_data(nlh);
if (ifm->ifi_index > 0)
dev = __dev_get_by_index(net, ifm->ifi_index);
if (dev == NULL)
return -ENODEV;
- nskb = nlmsg_new(if_nlmsg_size(dev), GFP_KERNEL);
+ nskb = nlmsg_new(if_nlmsg_size(dev, ext_filter_mask), GFP_KERNEL);
if (nskb == NULL)
return -ENOBUFS;
err = rtnl_fill_ifinfo(nskb, dev, RTM_NEWLINK, NETLINK_CB(skb).pid,
- nlh->nlmsg_seq, 0, 0);
+ nlh->nlmsg_seq, 0, 0, ext_filter_mask);
if (err < 0) {
/* -EMSGSIZE implies BUG in if_nlmsg_size */
WARN_ON(err == -EMSGSIZE);
return err;
}
-static u16 rtnl_calcit(struct sk_buff *skb)
+static u16 rtnl_calcit(struct sk_buff *skb, struct nlmsghdr *nlh)
{
+ struct net *net = sock_net(skb->sk);
+ struct net_device *dev;
+ struct nlattr *tb[IFLA_MAX+1];
+ u32 ext_filter_mask = 0;
+ u16 min_ifinfo_dump_size = 0;
+
+ nlmsg_parse(nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, ifla_policy);
+
+ if (tb[IFLA_EXT_MASK])
+ ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+
+ if (!ext_filter_mask)
+ return NLMSG_GOODSIZE;
+ /*
+ * traverse the list of net devices and compute the minimum
+ * buffer size based upon the filter mask.
+ */
+ list_for_each_entry(dev, &net->dev_base_head, dev_list) {
+ min_ifinfo_dump_size = max_t(u16, min_ifinfo_dump_size,
+ if_nlmsg_size(dev,
+ ext_filter_mask));
+ }
+
return min_ifinfo_dump_size;
}
int err = -ENOBUFS;
size_t if_info_size;
- skb = nlmsg_new((if_info_size = if_nlmsg_size(dev)), GFP_KERNEL);
+ skb = nlmsg_new((if_info_size = if_nlmsg_size(dev, 0)), GFP_KERNEL);
if (skb == NULL)
goto errout;
- min_ifinfo_dump_size = max_t(u16, if_info_size, min_ifinfo_dump_size);
-
- err = rtnl_fill_ifinfo(skb, dev, type, 0, 0, change, 0);
+ err = rtnl_fill_ifinfo(skb, dev, type, 0, 0, change, 0, 0);
if (err < 0) {
/* -EMSGSIZE implies BUG in if_nlmsg_size() */
WARN_ON(err == -EMSGSIZE);
return -EOPNOTSUPP;
calcit = rtnl_get_calcit(family, type);
if (calcit)
- min_dump_alloc = calcit(skb);
+ min_dump_alloc = calcit(skb, nlh);
__rtnl_unlock();
rtnl = net->rtnl;
void sock_update_netprioidx(struct sock *sk)
{
- struct cgroup_netprio_state *state;
if (in_interrupt())
return;
- rcu_read_lock();
- state = task_netprio_state(current);
- sk->sk_cgrp_prioidx = state ? state->prioidx : 0;
- rcu_read_unlock();
+
+ sk->sk_cgrp_prioidx = task_netprioidx(current);
}
EXPORT_SYMBOL_GPL(sock_update_netprioidx);
#endif
config INET_UDP_DIAG
tristate "UDP: socket monitoring interface"
- depends on INET_DIAG
+ depends on INET_DIAG && (IPV6 || IPV6=n)
default n
---help---
Support for UDP socket monitoring interface used by the ss tool.
if (addr_type == RTN_UNICAST &&
(arp_fwd_proxy(in_dev, dev, rt) ||
arp_fwd_pvlan(in_dev, dev, rt, sip, tip) ||
- pneigh_lookup(&arp_tbl, net, &tip, dev, 0))) {
+ (rt->dst.dev != dev &&
+ pneigh_lookup(&arp_tbl, net, &tip, dev, 0)))) {
n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
if (n)
neigh_release(n);
it is infeasible task. The most general solutions would be
to keep skb->encapsulation counter (sort of local ttl),
and silently drop packet when it expires. It is a good
- solution, but it supposes maintaing new variable in ALL
+ solution, but it supposes maintaining new variable in ALL
skb, even if no tunneling is used.
Current solution: xmit_recursion breaks dead loops. This is a percpu
One of them is to parse packet trying to detect inner encapsulation
made by our node. It is difficult or even impossible, especially,
- taking into account fragmentation. TO be short, tt is not solution at all.
+ taking into account fragmentation. TO be short, ttl is not solution at all.
Current solution: The solution was UNEXPECTEDLY SIMPLE.
We force DF flag on tunnels with preconfigured hop limit,
that is ALL. :-) Well, it does not remove the problem completely,
but exponential growth of network traffic is changed to linear
(branches, that exceed pmtu are pruned) and tunnel mtu
- fastly degrades to value <68, where looping stops.
+ rapidly degrades to value <68, where looping stops.
Yes, it is not good if there exists a router in the loop,
which does not force DF, even when encapsulating packets have DF set.
But it is not our problem! Nobody could accuse us, we made
GRE tunnels with enabled checksum. Tell them "thank you".
Well, I wonder, rfc1812 was written by Cisco employee,
- what the hell these idiots break standrads established
- by themself???
+ what the hell these idiots break standards established
+ by themselves???
*/
const struct iphdr *iph = (const struct iphdr *)skb->data;
}
if (srrptr + 3 <= srrspace) {
opt->is_changed = 1;
- ip_rt_get_source(&optptr[srrptr-1], skb, rt);
ip_hdr(skb)->daddr = opt->nexthop;
+ ip_rt_get_source(&optptr[srrptr-1], skb, rt);
optptr[2] = srrptr+4;
} else if (net_ratelimit())
printk(KERN_CRIT "ip_forward(): Argh! Destination lost!\n");
pr_debug("ping_recvmsg(sk=%p,sk->num=%u)\n", isk, isk->inet_num);
+ err = -EOPNOTSUPP;
if (flags & MSG_OOB)
goto out;
static __net_init int ipv4_sysctl_init_net(struct net *net)
{
struct ctl_table *table;
- unsigned long limit;
table = ipv4_net_table;
if (!net_eq(net, &init_net)) {
net->ipv4.sysctl_rt_cache_rebuild_count = 4;
tcp_init_mem(net);
- limit = nr_free_buffer_pages() / 8;
- limit = max(limit, 128UL);
- net->ipv4.sysctl_tcp_mem[0] = limit / 4 * 3;
- net->ipv4.sysctl_tcp_mem[1] = limit;
- net->ipv4.sysctl_tcp_mem[2] = net->ipv4.sysctl_tcp_mem[0] * 2;
net->ipv4.ipv4_hdr = register_net_sysctl_table(net,
net_ipv4_ctl_path, table);
}
EXPORT_SYMBOL(tcp_shutdown);
+bool tcp_check_oom(struct sock *sk, int shift)
+{
+ bool too_many_orphans, out_of_socket_memory;
+
+ too_many_orphans = tcp_too_many_orphans(sk, shift);
+ out_of_socket_memory = tcp_out_of_memory(sk);
+
+ if (too_many_orphans && net_ratelimit())
+ pr_info("TCP: too many orphaned sockets\n");
+ if (out_of_socket_memory && net_ratelimit())
+ pr_info("TCP: out of memory -- consider tuning tcp_mem\n");
+ return too_many_orphans || out_of_socket_memory;
+}
+
void tcp_close(struct sock *sk, long timeout)
{
struct sk_buff *skb;
}
if (sk->sk_state != TCP_CLOSE) {
sk_mem_reclaim(sk);
- if (tcp_too_many_orphans(sk, 0)) {
- if (net_ratelimit())
- printk(KERN_INFO "TCP: too many of orphaned "
- "sockets\n");
+ if (tcp_check_oom(sk, 0)) {
tcp_set_state(sk, TCP_CLOSE);
tcp_send_active_reset(sk, GFP_ATOMIC);
NET_INC_STATS_BH(sock_net(sk),
void tcp_init_mem(struct net *net)
{
- /* Set per-socket limits to no more than 1/128 the pressure threshold */
unsigned long limit = nr_free_buffer_pages() / 8;
limit = max(limit, 128UL);
net->ipv4.sysctl_tcp_mem[0] = limit / 4 * 3;
{
struct sk_buff *skb = NULL;
unsigned long limit;
- int i, max_share, cnt;
+ int max_share, cnt;
+ unsigned int i;
unsigned long jiffy = jiffies;
BUILD_BUG_ON(sizeof(struct tcp_skb_cb) > sizeof(skb->cb));
&tcp_hashinfo.bhash_size,
NULL,
64 * 1024);
- tcp_hashinfo.bhash_size = 1 << tcp_hashinfo.bhash_size;
+ tcp_hashinfo.bhash_size = 1U << tcp_hashinfo.bhash_size;
for (i = 0; i < tcp_hashinfo.bhash_size; i++) {
spin_lock_init(&tcp_hashinfo.bhash[i].lock);
INIT_HLIST_HEAD(&tcp_hashinfo.bhash[i].chain);
sysctl_max_syn_backlog = max(128, cnt / 256);
tcp_init_mem(&init_net);
- limit = nr_free_buffer_pages() / 8;
+ /* Set per-socket limits to no more than 1/128 the pressure threshold */
+ limit = nr_free_buffer_pages() << (PAGE_SHIFT - 10);
limit = max(limit, 128UL);
max_share = min(4UL*1024*1024, limit);
return in_sack;
}
-static u8 tcp_sacktag_one(const struct sk_buff *skb, struct sock *sk,
- struct tcp_sacktag_state *state,
+/* Mark the given newly-SACKed range as such, adjusting counters and hints. */
+static u8 tcp_sacktag_one(struct sock *sk,
+ struct tcp_sacktag_state *state, u8 sacked,
+ u32 start_seq, u32 end_seq,
int dup_sack, int pcount)
{
struct tcp_sock *tp = tcp_sk(sk);
- u8 sacked = TCP_SKB_CB(skb)->sacked;
int fack_count = state->fack_count;
/* Account D-SACK for retransmitted packet. */
if (dup_sack && (sacked & TCPCB_RETRANS)) {
if (tp->undo_marker && tp->undo_retrans &&
- after(TCP_SKB_CB(skb)->end_seq, tp->undo_marker))
+ after(end_seq, tp->undo_marker))
tp->undo_retrans--;
if (sacked & TCPCB_SACKED_ACKED)
state->reord = min(fack_count, state->reord);
}
/* Nothing to do; acked frame is about to be dropped (was ACKed). */
- if (!after(TCP_SKB_CB(skb)->end_seq, tp->snd_una))
+ if (!after(end_seq, tp->snd_una))
return sacked;
if (!(sacked & TCPCB_SACKED_ACKED)) {
/* New sack for not retransmitted frame,
* which was in hole. It is reordering.
*/
- if (before(TCP_SKB_CB(skb)->seq,
+ if (before(start_seq,
tcp_highest_sack_seq(tp)))
state->reord = min(fack_count,
state->reord);
/* SACK enhanced F-RTO (RFC4138; Appendix B) */
- if (!after(TCP_SKB_CB(skb)->end_seq, tp->frto_highmark))
+ if (!after(end_seq, tp->frto_highmark))
state->flag |= FLAG_ONLY_ORIG_SACKED;
}
/* Lost marker hint past SACKed? Tweak RFC3517 cnt */
if (!tcp_is_fack(tp) && (tp->lost_skb_hint != NULL) &&
- before(TCP_SKB_CB(skb)->seq,
- TCP_SKB_CB(tp->lost_skb_hint)->seq))
+ before(start_seq, TCP_SKB_CB(tp->lost_skb_hint)->seq))
tp->lost_cnt_hint += pcount;
if (fack_count > tp->fackets_out)
return sacked;
}
+/* Shift newly-SACKed bytes from this skb to the immediately previous
+ * already-SACKed sk_buff. Mark the newly-SACKed bytes as such.
+ */
static int tcp_shifted_skb(struct sock *sk, struct sk_buff *skb,
struct tcp_sacktag_state *state,
unsigned int pcount, int shifted, int mss,
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *prev = tcp_write_queue_prev(sk, skb);
+ u32 start_seq = TCP_SKB_CB(skb)->seq; /* start of newly-SACKed */
+ u32 end_seq = start_seq + shifted; /* end of newly-SACKed */
BUG_ON(!pcount);
- if (skb == tp->lost_skb_hint)
+ /* Adjust hint for FACK. Non-FACK is handled in tcp_sacktag_one(). */
+ if (tcp_is_fack(tp) && (skb == tp->lost_skb_hint))
tp->lost_cnt_hint += pcount;
TCP_SKB_CB(prev)->end_seq += shifted;
skb_shinfo(skb)->gso_type = 0;
}
- /* We discard results */
- tcp_sacktag_one(skb, sk, state, dup_sack, pcount);
+ /* Adjust counters and hints for the newly sacked sequence range but
+ * discard the return value since prev is already marked.
+ */
+ tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked,
+ start_seq, end_seq, dup_sack, pcount);
/* Difference in this won't matter, both ACKed by the same cumul. ACK */
TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);
break;
if (in_sack) {
- TCP_SKB_CB(skb)->sacked = tcp_sacktag_one(skb, sk,
- state,
- dup_sack,
- tcp_skb_pcount(skb));
+ TCP_SKB_CB(skb)->sacked =
+ tcp_sacktag_one(sk,
+ state,
+ TCP_SKB_CB(skb)->sacked,
+ TCP_SKB_CB(skb)->seq,
+ TCP_SKB_CB(skb)->end_seq,
+ dup_sack,
+ tcp_skb_pcount(skb));
if (!before(TCP_SKB_CB(skb)->seq,
tcp_highest_sack_seq(tp)))
arg.iov[0].iov_len, IPPROTO_TCP, 0);
arg.csumoffset = offsetof(struct tcphdr, check) / 2;
arg.flags = (sk && inet_sk(sk)->transparent) ? IP_REPLY_ARG_NOSRCCHECK : 0;
+ /* When socket is gone, all binding information is lost.
+ * routing might fail in this case. using iif for oif to
+ * make sure we can deliver it
+ */
+ arg.bound_dev_if = sk ? sk->sk_bound_dev_if : inet_iif(skb);
net = dev_net(skb_dst(skb)->dev);
arg.tos = ip_hdr(skb)->tos;
if (sk->sk_err_soft)
shift++;
- if (tcp_too_many_orphans(sk, shift)) {
- if (net_ratelimit())
- printk(KERN_INFO "Out of socket memory\n");
-
+ if (tcp_check_oom(sk, shift)) {
/* Catch exceptional cases, when connection requires reset.
* 1. Last segment was sent recently. */
if ((s32)(tcp_time_stamp - tp->lsndtime) <= TCP_TIMEWAIT_LEN ||
skb_push(skb, sizeof(*iph));
skb_reset_network_header(skb);
-
- memmove(skb->data - skb->mac_len, skb_mac_header(skb),
- skb->mac_len);
- skb_set_mac_header(skb, -skb->mac_len);
+ skb_mac_header_rebuild(skb);
xfrm4_beet_make_header(skb);
static int xfrm4_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
{
- const unsigned char *old_mac;
int err = -EINVAL;
if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPIP)
if (!(x->props.flags & XFRM_STATE_NOECN))
ipip_ecn_decapsulate(skb);
- old_mac = skb_mac_header(skb);
- skb_set_mac_header(skb, -skb->mac_len);
- memmove(skb_mac_header(skb), old_mac, skb->mac_len);
skb_reset_network_header(skb);
+ skb_mac_header_rebuild(skb);
+
err = 0;
out:
};
dst = ip6_route_output(net, NULL, &fl6);
- if (!dst)
+ if (dst->error) {
+ dst_release(dst);
goto out_free;
+ }
skb_dst_drop(skb);
skb_dst_set(skb, dst);
&saddr_buf, &ipv6_hdr(skb)->saddr, dev->ifindex);
dst = ip6_route_output(net, NULL, &fl6);
- if (dst == NULL)
+ if (dst->error) {
+ dst_release(dst);
return;
-
+ }
dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), NULL, 0);
if (IS_ERR(dst))
return;
static int xfrm6_beet_input(struct xfrm_state *x, struct sk_buff *skb)
{
struct ipv6hdr *ip6h;
- const unsigned char *old_mac;
int size = sizeof(struct ipv6hdr);
int err;
__skb_push(skb, size);
skb_reset_network_header(skb);
-
- old_mac = skb_mac_header(skb);
- skb_set_mac_header(skb, -skb->mac_len);
- memmove(skb_mac_header(skb), old_mac, skb->mac_len);
+ skb_mac_header_rebuild(skb);
xfrm6_beet_make_header(skb);
static int xfrm6_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
{
int err = -EINVAL;
- const unsigned char *old_mac;
if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPV6)
goto out;
if (!(x->props.flags & XFRM_STATE_NOECN))
ipip6_ecn_decapsulate(skb);
- old_mac = skb_mac_header(skb);
- skb_set_mac_header(skb, -skb->mac_len);
- memmove(skb_mac_header(skb), old_mac, skb->mac_len);
skb_reset_network_header(skb);
+ skb_mac_header_rebuild(skb);
+
err = 0;
out:
test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : ""
int res = scnprintf(buf, sizeof(buf),
- "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+ "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
TEST(AUTH), TEST(ASSOC), TEST(PS_STA),
TEST(PS_DRIVER), TEST(AUTHORIZED),
TEST(SHORT_PREAMBLE),
TEST(WME), TEST(WDS), TEST(CLEAR_PS_FILT),
TEST(MFP), TEST(BLOCK_BA), TEST(PSPOLL),
TEST(UAPSD), TEST(SP), TEST(TDLS_PEER),
- TEST(TDLS_PEER_AUTH));
+ TEST(TDLS_PEER_AUTH), TEST(RATE_CONTROL));
#undef TEST
return simple_read_from_buffer(userbuf, count, ppos, buf, res);
}
wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
result);
+ ieee80211_led_init(local);
+
rtnl_lock();
result = ieee80211_init_rate_ctrl_alg(local,
rtnl_unlock();
- ieee80211_led_init(local);
-
local->network_latency_notifier.notifier_call =
ieee80211_max_network_latency;
result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
int i;
u32 mask;
- if (sta) {
+ if (sta && test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) {
ista = &sta->sta;
priv_sta = sta->rate_ctrl_priv;
}
struct ieee80211_sta *ista = &sta->sta;
void *priv_sta = sta->rate_ctrl_priv;
- if (!ref)
+ if (!ref || !test_sta_flag(sta, WLAN_STA_RATE_CONTROL))
return;
ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb);
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
ref->ops->rate_init(ref->priv, sband, ista, priv_sta);
+ set_sta_flag(sta, WLAN_STA_RATE_CONTROL);
}
static inline void rate_control_rate_update(struct ieee80211_local *local,
index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
tid_agg_rx->buf_size;
if (!tid_agg_rx->reorder_buf[index] &&
- tid_agg_rx->stored_mpdu_num > 1) {
+ tid_agg_rx->stored_mpdu_num) {
/*
* No buffers ready to be released, but check whether any
* frames in the reorder buffer have timed out.
* @WLAN_STA_SP: Station is in a service period, so don't try to
* reply to other uAPSD trigger frames or PS-Poll.
* @WLAN_STA_4ADDR_EVENT: 4-addr event was already sent for this frame.
+ * @WLAN_STA_RATE_CONTROL: rate control was initialized for this station.
*/
enum ieee80211_sta_info_flags {
WLAN_STA_AUTH,
WLAN_STA_UAPSD,
WLAN_STA_SP,
WLAN_STA_4ADDR_EVENT,
+ WLAN_STA_RATE_CONTROL,
};
enum ieee80211_sta_state {
__be16 dport = 0; /* destination port to forward */
unsigned int flags;
struct ip_vs_conn_param param;
+ const union nf_inet_addr fwmark = { .ip = htonl(svc->fwmark) };
union nf_inet_addr snet; /* source network of the client,
after masking */
{
int protocol = iph.protocol;
const union nf_inet_addr *vaddr = &iph.daddr;
- const union nf_inet_addr fwmark = { .ip = htonl(svc->fwmark) };
__be16 vport = 0;
if (dst_port == svc->port) {
&net->ct.hash[repl_hash]);
}
-void nf_conntrack_hash_insert(struct nf_conn *ct)
+int
+nf_conntrack_hash_check_insert(struct nf_conn *ct)
{
struct net *net = nf_ct_net(ct);
unsigned int hash, repl_hash;
+ struct nf_conntrack_tuple_hash *h;
+ struct hlist_nulls_node *n;
u16 zone;
zone = nf_ct_zone(ct);
- hash = hash_conntrack(net, zone, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
- repl_hash = hash_conntrack(net, zone, &ct->tuplehash[IP_CT_DIR_REPLY].tuple);
+ hash = hash_conntrack(net, zone,
+ &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
+ repl_hash = hash_conntrack(net, zone,
+ &ct->tuplehash[IP_CT_DIR_REPLY].tuple);
+
+ spin_lock_bh(&nf_conntrack_lock);
+ /* See if there's one in the list already, including reverse */
+ hlist_nulls_for_each_entry(h, n, &net->ct.hash[hash], hnnode)
+ if (nf_ct_tuple_equal(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple,
+ &h->tuple) &&
+ zone == nf_ct_zone(nf_ct_tuplehash_to_ctrack(h)))
+ goto out;
+ hlist_nulls_for_each_entry(h, n, &net->ct.hash[repl_hash], hnnode)
+ if (nf_ct_tuple_equal(&ct->tuplehash[IP_CT_DIR_REPLY].tuple,
+ &h->tuple) &&
+ zone == nf_ct_zone(nf_ct_tuplehash_to_ctrack(h)))
+ goto out;
+
+ add_timer(&ct->timeout);
+ nf_conntrack_get(&ct->ct_general);
__nf_conntrack_hash_insert(ct, hash, repl_hash);
+ NF_CT_STAT_INC(net, insert);
+ spin_unlock_bh(&nf_conntrack_lock);
+
+ return 0;
+
+out:
+ NF_CT_STAT_INC(net, insert_failed);
+ spin_unlock_bh(&nf_conntrack_lock);
+ return -EEXIST;
}
-EXPORT_SYMBOL_GPL(nf_conntrack_hash_insert);
+EXPORT_SYMBOL_GPL(nf_conntrack_hash_check_insert);
/* Confirm a connection given skb; places it in hash table */
int
nf_ct_protonum(ct));
if (helper == NULL) {
rcu_read_unlock();
- spin_unlock_bh(&nf_conntrack_lock);
#ifdef CONFIG_MODULES
if (request_module("nfct-helper-%s", helpname) < 0) {
- spin_lock_bh(&nf_conntrack_lock);
err = -EOPNOTSUPP;
goto err1;
}
- spin_lock_bh(&nf_conntrack_lock);
rcu_read_lock();
helper = __nf_conntrack_helper_find(helpname,
nf_ct_l3num(ct),
if (tstamp)
tstamp->start = ktime_to_ns(ktime_get_real());
- add_timer(&ct->timeout);
- nf_conntrack_hash_insert(ct);
+ err = nf_conntrack_hash_check_insert(ct);
+ if (err < 0)
+ goto err2;
+
rcu_read_unlock();
return ct;
struct nf_conntrack_tuple otuple, rtuple;
struct nf_conntrack_tuple_hash *h = NULL;
struct nfgenmsg *nfmsg = nlmsg_data(nlh);
+ struct nf_conn *ct;
u_int8_t u3 = nfmsg->nfgen_family;
u16 zone;
int err;
return err;
}
- spin_lock_bh(&nf_conntrack_lock);
if (cda[CTA_TUPLE_ORIG])
- h = __nf_conntrack_find(net, zone, &otuple);
+ h = nf_conntrack_find_get(net, zone, &otuple);
else if (cda[CTA_TUPLE_REPLY])
- h = __nf_conntrack_find(net, zone, &rtuple);
+ h = nf_conntrack_find_get(net, zone, &rtuple);
if (h == NULL) {
err = -ENOENT;
if (nlh->nlmsg_flags & NLM_F_CREATE) {
- struct nf_conn *ct;
enum ip_conntrack_events events;
ct = ctnetlink_create_conntrack(net, zone, cda, &otuple,
&rtuple, u3);
- if (IS_ERR(ct)) {
- err = PTR_ERR(ct);
- goto out_unlock;
- }
+ if (IS_ERR(ct))
+ return PTR_ERR(ct);
+
err = 0;
- nf_conntrack_get(&ct->ct_general);
- spin_unlock_bh(&nf_conntrack_lock);
if (test_bit(IPS_EXPECTED_BIT, &ct->status))
events = IPCT_RELATED;
else
ct, NETLINK_CB(skb).pid,
nlmsg_report(nlh));
nf_ct_put(ct);
- } else
- spin_unlock_bh(&nf_conntrack_lock);
+ }
return err;
}
/* implicit 'else' */
- /* We manipulate the conntrack inside the global conntrack table lock,
- * so there's no need to increase the refcount */
err = -EEXIST;
+ ct = nf_ct_tuplehash_to_ctrack(h);
if (!(nlh->nlmsg_flags & NLM_F_EXCL)) {
- struct nf_conn *ct = nf_ct_tuplehash_to_ctrack(h);
-
+ spin_lock_bh(&nf_conntrack_lock);
err = ctnetlink_change_conntrack(ct, cda);
+ spin_unlock_bh(&nf_conntrack_lock);
if (err == 0) {
- nf_conntrack_get(&ct->ct_general);
- spin_unlock_bh(&nf_conntrack_lock);
nf_conntrack_eventmask_report((1 << IPCT_REPLY) |
(1 << IPCT_ASSURED) |
(1 << IPCT_HELPER) |
(1 << IPCT_MARK),
ct, NETLINK_CB(skb).pid,
nlmsg_report(nlh));
- nf_ct_put(ct);
- } else
- spin_unlock_bh(&nf_conntrack_lock);
-
- return err;
+ }
}
-out_unlock:
- spin_unlock_bh(&nf_conntrack_lock);
+ nf_ct_put(ct);
return err;
}
return status;
}
+#ifdef CONFIG_BRIDGE_NETFILTER
+/* When called from bridge netfilter, skb->data must point to MAC header
+ * before calling skb_gso_segment(). Else, original MAC header is lost
+ * and segmented skbs will be sent to wrong destination.
+ */
+static void nf_bridge_adjust_skb_data(struct sk_buff *skb)
+{
+ if (skb->nf_bridge)
+ __skb_push(skb, skb->network_header - skb->mac_header);
+}
+
+static void nf_bridge_adjust_segmented_data(struct sk_buff *skb)
+{
+ if (skb->nf_bridge)
+ __skb_pull(skb, skb->network_header - skb->mac_header);
+}
+#else
+#define nf_bridge_adjust_skb_data(s) do {} while (0)
+#define nf_bridge_adjust_segmented_data(s) do {} while (0)
+#endif
+
int nf_queue(struct sk_buff *skb,
struct list_head *elem,
u_int8_t pf, unsigned int hook,
unsigned int queuenum)
{
struct sk_buff *segs;
- int err;
+ int err = -EINVAL;
unsigned int queued;
if (!skb_is_gso(skb))
break;
}
+ nf_bridge_adjust_skb_data(skb);
segs = skb_gso_segment(skb, 0);
/* Does not use PTR_ERR to limit the number of error codes that can be
* returned by nf_queue. For instance, callers rely on -ECANCELED to mean
* 'ignore this hook'.
*/
if (IS_ERR(segs))
- return -EINVAL;
-
+ goto out_err;
queued = 0;
err = 0;
do {
struct sk_buff *nskb = segs->next;
segs->next = NULL;
- if (err == 0)
+ if (err == 0) {
+ nf_bridge_adjust_segmented_data(segs);
err = __nf_queue(segs, elem, pf, hook, indev,
outdev, okfn, queuenum);
+ }
if (err == 0)
queued++;
else
segs = nskb;
} while (segs);
- /* also free orig skb if only some segments were queued */
- if (unlikely(err && queued))
- err = 0;
- if (err == 0)
+ if (queued) {
kfree_skb(skb);
+ return 0;
+ }
+ out_err:
+ nf_bridge_adjust_segmented_data(skb);
return err;
}
fl6.flowlabel = ((iph->flow_lbl[0] & 0xF) << 16) |
(iph->flow_lbl[1] << 8) | iph->flow_lbl[2];
dst = ip6_route_output(net, NULL, &fl6);
- if (dst == NULL)
+ if (dst->error) {
+ dst_release(dst);
return false;
-
+ }
skb_dst_drop(skb);
skb_dst_set(skb, dst);
skb->dev = dst->dev;
if (toklen <= (n_parts + 1) * 4)
return -EINVAL;
- princ->name_parts = kcalloc(sizeof(char *), n_parts, GFP_KERNEL);
+ princ->name_parts = kcalloc(n_parts, sizeof(char *), GFP_KERNEL);
if (!princ->name_parts)
return -ENOMEM;
_debug("n_elem %d", n_elem);
- td = kcalloc(sizeof(struct krb5_tagged_data), n_elem,
+ td = kcalloc(n_elem, sizeof(struct krb5_tagged_data),
GFP_KERNEL);
if (!td)
return -ENOMEM;
static inline struct choke_skb_cb *choke_skb_cb(const struct sk_buff *skb)
{
- BUILD_BUG_ON(sizeof(skb->cb) <
- sizeof(struct qdisc_skb_cb) + sizeof(struct choke_skb_cb));
+ qdisc_cb_private_validate(skb, sizeof(struct choke_skb_cb));
return (struct choke_skb_cb *)qdisc_skb_cb(skb)->data;
}
static inline struct netem_skb_cb *netem_skb_cb(struct sk_buff *skb)
{
- BUILD_BUG_ON(sizeof(skb->cb) <
- sizeof(struct qdisc_skb_cb) + sizeof(struct netem_skb_cb));
+ qdisc_cb_private_validate(skb, sizeof(struct netem_skb_cb));
return (struct netem_skb_cb *)qdisc_skb_cb(skb)->data;
}
/* if more time remaining? */
if (cb->time_to_send <= psched_get_time()) {
- skb = qdisc_dequeue_tail(sch);
- if (unlikely(!skb))
- goto qdisc_dequeue;
+ __skb_unlink(skb, &sch->q);
+ sch->qstats.backlog -= qdisc_pkt_len(skb);
#ifdef CONFIG_NET_CLS_ACT
/*
qdisc_watchdog_schedule(&q->watchdog, cb->time_to_send);
}
-qdisc_dequeue:
if (q->qdisc) {
skb = q->qdisc->ops->dequeue(q->qdisc);
if (skb)
static inline struct sfb_skb_cb *sfb_skb_cb(const struct sk_buff *skb)
{
- BUILD_BUG_ON(sizeof(skb->cb) <
- sizeof(struct qdisc_skb_cb) + sizeof(struct sfb_skb_cb));
+ qdisc_cb_private_validate(skb, sizeof(struct sfb_skb_cb));
return (struct sfb_skb_cb *)qdisc_skb_cb(skb)->data;
}
static inline struct sfq_skb_cb *sfq_skb_cb(const struct sk_buff *skb)
{
- BUILD_BUG_ON(sizeof(skb->cb) <
- sizeof(struct qdisc_skb_cb) + sizeof(struct sfq_skb_cb));
- return (struct sfq_skb_cb *)qdisc_skb_cb(skb)->data;
+ qdisc_cb_private_validate(skb, sizeof(struct sfq_skb_cb));
+ return (struct sfq_skb_cb *)qdisc_skb_cb(skb)->data;
}
static unsigned int sfq_hash(const struct sfq_sched_data *q,
my $pre_ctx = "$1$2";
my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
+
+ if ($line =~ /^\+\t{6,}/) {
+ WARN("DEEP_INDENTATION",
+ "Too many leading tabs - consider code refactoring\n" . $herecurr);
+ }
+
my $ctx_cnt = $realcnt - $#ctx - 1;
my $ctx = join("\n", @ctx);
# FLAGS="-ignore_unknown_options -very_quiet"
# OPTIONS=$*
- if [ "$KBUILD_EXTMOD" = "" ] ; then
- # Workaround for Coccinelle < 0.2.3
- FLAGS="-I $srctree/include -very_quiet"
- shift $(( $# - 1 ))
- OPTIONS=$1
- else
- echo M= is not currently supported when C=1 or C=2
- exit 1
- fi
+# Workaround for Coccinelle < 0.2.3
+ FLAGS="-I $srctree/include -very_quiet"
+ shift $(( $# - 1 ))
+ OPTIONS=$1
else
ONLINE=0
FLAGS="-very_quiet"
DEPMOD=$1
KERNELRELEASE=$2
-if ! "$DEPMOD" -V 2>/dev/null | grep -q module-init-tools; then
- echo "Warning: you may need to install module-init-tools" >&2
- echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt" >&2
- sleep 1
-fi
-
if ! test -r System.map -a -x "$DEPMOD"; then
exit 0
fi
void *function;
};
+#define ___cat(a,b) a ## b
+#define __cat(a,b) ___cat(a,b)
+
+/* we need some special handling for this host tool running eventually on
+ * Darwin. The Mach-O section handling is a bit different than ELF section
+ * handling. The differnces in detail are:
+ * a) we have segments which have sections
+ * b) we need a API call to get the respective section symbols */
+#if defined(__MACH__)
+#include <mach-o/getsect.h>
+
+#define INIT_SECTION(name) do { \
+ unsigned long name ## _len; \
+ char *__cat(pstart_,name) = getsectdata("__TEXT", \
+ #name, &__cat(name,_len)); \
+ char *__cat(pstop_,name) = __cat(pstart_,name) + \
+ __cat(name, _len); \
+ __cat(__start_,name) = (void *)__cat(pstart_,name); \
+ __cat(__stop_,name) = (void *)__cat(pstop_,name); \
+ } while (0)
+#define SECTION(name) __attribute__((section("__TEXT, " #name)))
+
+struct devtable **__start___devtable, **__stop___devtable;
+#else
+#define INIT_SECTION(name) /* no-op for ELF */
+#define SECTION(name) __attribute__((section(#name)))
+
/* We construct a table of pointers in an ELF section (pointers generally
* go unpadded by gcc). ld creates boundary syms for us. */
extern struct devtable *__start___devtable[], *__stop___devtable[];
-#define ___cat(a,b) a ## b
-#define __cat(a,b) ___cat(a,b)
+#endif /* __MACH__ */
#if __GNUC__ == 3 && __GNUC_MINOR__ < 3
# define __used __attribute__((__unused__))
(type *)NULL, \
(char *)NULL)), \
sizeof(type), (function) }; \
- static struct devtable *__attribute__((section("__devtable"))) \
- __used __cat(devtable_ptr,__LINE__) = &__cat(devtable,__LINE__)
+ static struct devtable *SECTION(__devtable) __used \
+ __cat(devtable_ptr,__LINE__) = &__cat(devtable,__LINE__)
#define ADD(str, sep, cond, field) \
do { \
(id->function >> 12) & 0x0f, (id->function >> 8) & 0x0f);
return 1;
}
-ADD_TO_DEVTABLE("isa", struct isapnp_device_id, do_isapnp_entry);
+ADD_TO_DEVTABLE("isapnp", struct isapnp_device_id, do_isapnp_entry);
/*
* Append a match expression for a single masked hex digit.
do_pnp_card_entries(symval, sym->st_size, mod);
else {
struct devtable **p;
+ INIT_SECTION(__devtable);
for (p = __start___devtable; p < __stop___devtable; p++) {
if (sym_is(name, namelen, (*p)->device_id)) {
return 0;
}
+#ifndef R_ARM_CALL
+#define R_ARM_CALL 28
+#endif
+#ifndef R_ARM_JUMP24
+#define R_ARM_JUMP24 29
+#endif
+
static int addend_arm_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
{
unsigned int r_typ = ELF_R_TYPE(r->r_info);
(elf->symtab_start + ELF_R_SYM(r->r_info));
break;
case R_ARM_PC24:
+ case R_ARM_CALL:
+ case R_ARM_JUMP24:
/* From ARM ABI: ((S + A) | T) - P */
r->r_addend = (int)(long)(elf->hdr +
sechdr->sh_offset +
fi
# Build header package
-(cd $srctree; find . -name Makefile -o -name Kconfig\* -o -name \*.pl > /tmp/files$$)
-(cd $srctree; find arch/$SRCARCH/include include scripts -type f >> /tmp/files$$)
-(cd $objtree; find .config Module.symvers include scripts -type f >> /tmp/objfiles$$)
+(cd $srctree; find . -name Makefile -o -name Kconfig\* -o -name \*.pl > "$objtree/debian/hdrsrcfiles")
+(cd $srctree; find arch/$SRCARCH/include include scripts -type f >> "$objtree/debian/hdrsrcfiles")
+(cd $objtree; find .config Module.symvers include scripts -type f >> "$objtree/debian/hdrobjfiles")
destdir=$kernel_headers_dir/usr/src/linux-headers-$version
mkdir -p "$destdir"
-(cd $srctree; tar -c -f - -T /tmp/files$$) | (cd $destdir; tar -xf -)
-(cd $objtree; tar -c -f - -T /tmp/objfiles$$) | (cd $destdir; tar -xf -)
-rm -f /tmp/files$$ /tmp/objfiles$$
+(cd $srctree; tar -c -f - -T "$objtree/debian/hdrsrcfiles") | (cd $destdir; tar -xf -)
+(cd $objtree; tar -c -f - -T "$objtree/debian/hdrobjfiles") | (cd $destdir; tar -xf -)
+rm -f "$objtree/debian/hdrsrcfiles" "$objtree/debian/hdrobjfiles"
arch=$(dpkg --print-architecture)
cat <<EOF >> debian/control
#include "emu8000_local.h"
#include <asm/uaccess.h>
#include <linux/moduleparam.h>
-#include <linux/moduleparam.h>
static int emu8000_reset_addr;
module_param(emu8000_reset_addr, int, 0444);
err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
if (err < 0)
goto out_err;
+ opl3->private_data = chip;
}
- opl3->private_data = chip;
-
sprintf(card->longname, "%s at 0x%lx, irq %i",
card->shortname, chip->ctrl_io, chip->irq);
parm = ch ? AC_AMP_SET_RIGHT : AC_AMP_SET_LEFT;
parm |= direction == HDA_OUTPUT ? AC_AMP_SET_OUTPUT : AC_AMP_SET_INPUT;
parm |= index << AC_AMP_SET_INDEX_SHIFT;
- parm |= val;
+ if ((val & HDA_AMP_MUTE) && !(info->amp_caps & AC_AMPCAP_MUTE) &&
+ (info->amp_caps & AC_AMPCAP_MIN_MUTE))
+ ; /* set the zero value as a fake mute */
+ else
+ parm |= val;
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, parm);
info->vol[ch] = val;
}
val1 = -((caps & AC_AMPCAP_OFFSET) >> AC_AMPCAP_OFFSET_SHIFT);
val1 += ofs;
val1 = ((int)val1) * ((int)val2);
- if (min_mute)
+ if (min_mute || (caps & AC_AMPCAP_MIN_MUTE))
val2 |= TLV_DB_SCALE_MUTE;
if (put_user(SNDRV_CTL_TLVT_DB_SCALE, _tlv))
return -EFAULT;
const char *pfx = "", *sfx = "";
/* handle as a speaker if it's a fixed line-out */
- if (!strcmp(name, "Line-Out") && attr == INPUT_PIN_ATTR_INT)
+ if (!strcmp(name, "Line Out") && attr == INPUT_PIN_ATTR_INT)
name = "Speaker";
/* check the location */
switch (attr) {
switch (get_defcfg_device(def_conf)) {
case AC_JACK_LINE_OUT:
- return fill_audio_out_name(codec, nid, cfg, "Line-Out",
+ return fill_audio_out_name(codec, nid, cfg, "Line Out",
label, maxlen, indexp);
case AC_JACK_SPEAKER:
return fill_audio_out_name(codec, nid, cfg, "Speaker",
#define AC_AMPCAP_MUTE (1<<31) /* mute capable */
#define AC_AMPCAP_MUTE_SHIFT 31
+/* driver-specific amp-caps: using bits 24-30 */
+#define AC_AMPCAP_MIN_MUTE (1 << 30) /* min-volume = mute */
+
/* Connection list */
#define AC_CLIST_LENGTH (0x7f<<0)
#define AC_CLIST_LONG (1<<7)
err = chipio_read(codec, REG_CODEC_MUTE, &data);
if (err < 0)
- return err;
+ goto exit;
/* *valp 0 is mute, 1 is unmute */
data = (data & 0x7f) | (*valp ? 0 : 0x80);
- chipio_write(codec, REG_CODEC_MUTE, data);
+ err = chipio_write(codec, REG_CODEC_MUTE, data);
if (err < 0)
- return err;
+ goto exit;
spec->curr_hp_switch = *valp;
+ exit:
snd_hda_power_down(codec);
- return 1;
+ return err < 0 ? err : 1;
}
static int ca0132_speaker_switch_get(struct snd_kcontrol *kcontrol,
err = chipio_read(codec, REG_CODEC_MUTE, &data);
if (err < 0)
- return err;
+ goto exit;
/* *valp 0 is mute, 1 is unmute */
data = (data & 0xef) | (*valp ? 0 : 0x10);
- chipio_write(codec, REG_CODEC_MUTE, data);
+ err = chipio_write(codec, REG_CODEC_MUTE, data);
if (err < 0)
- return err;
+ goto exit;
spec->curr_speaker_switch = *valp;
+ exit:
snd_hda_power_down(codec);
- return 1;
+ return err < 0 ? err : 1;
}
static int ca0132_hp_volume_get(struct snd_kcontrol *kcontrol,
err = chipio_read(codec, REG_CODEC_HP_VOL_L, &data);
if (err < 0)
- return err;
+ goto exit;
val = 31 - left_vol;
data = (data & 0xe0) | val;
- chipio_write(codec, REG_CODEC_HP_VOL_L, data);
+ err = chipio_write(codec, REG_CODEC_HP_VOL_L, data);
if (err < 0)
- return err;
+ goto exit;
val = 31 - right_vol;
data = (data & 0xe0) | val;
- chipio_write(codec, REG_CODEC_HP_VOL_R, data);
+ err = chipio_write(codec, REG_CODEC_HP_VOL_R, data);
if (err < 0)
- return err;
+ goto exit;
spec->curr_hp_volume[0] = left_vol;
spec->curr_hp_volume[1] = right_vol;
+ exit:
snd_hda_power_down(codec);
- return 1;
+ return err < 0 ? err : 1;
}
static int add_hp_switch(struct hda_codec *codec, hda_nid_t nid)
if (err < 0)
return err;
err = add_in_volume(codec, spec->dig_in, "IEC958");
+ if (err < 0)
+ return err;
}
return 0;
}
"Front Speaker", "Surround Speaker", "Bass Speaker"
};
static const char * const line_outs[] = {
- "Front Line-Out", "Surround Line-Out", "Bass Line-Out"
+ "Front Line Out", "Surround Line Out", "Bass Line Out"
};
fix_volume_caps(codec, dac);
if (num_ctls > 1)
name = line_outs[idx];
else
- name = "Line-Out";
+ name = "Line Out";
break;
}
"Disabled", "Enabled"
};
static const char * const texts3[] = {
- "Disabled", "Speaker Only", "Line-Out+Speaker"
+ "Disabled", "Speaker Only", "Line Out+Speaker"
};
const char * const *texts;
err = snd_hda_ctl_add(codec, nid, kctl);
if (err < 0)
return err;
- if (!(query_amp_caps(codec, nid, hda_dir) & AC_AMPCAP_MUTE))
+ if (!(query_amp_caps(codec, nid, hda_dir) &
+ (AC_AMPCAP_MUTE | AC_AMPCAP_MIN_MUTE)))
break;
}
return 0;
{}
};
+/* add "fake" mute amp-caps to DACs on cx5051 so that mixer mute switches
+ * can be created (bko#42825)
+ */
+static void add_cx5051_fake_mutes(struct hda_codec *codec)
+{
+ static hda_nid_t out_nids[] = {
+ 0x10, 0x11, 0
+ };
+ hda_nid_t *p;
+
+ for (p = out_nids; *p; p++)
+ snd_hda_override_amp_caps(codec, *p, HDA_OUTPUT,
+ AC_AMPCAP_MIN_MUTE |
+ query_amp_caps(codec, *p, HDA_OUTPUT));
+}
+
static int patch_conexant_auto(struct hda_codec *codec)
{
struct conexant_spec *spec;
case 0x14f15045:
spec->single_adc_amp = 1;
break;
+ case 0x14f15051:
+ add_cx5051_fake_mutes(codec);
+ break;
}
apply_pin_fixup(codec, cxt_fixups, cxt_pincfg_tbl);
ALC_AUTOMUTE_MIXER, /* mute/unmute mixer widget AMP */
};
+#define MAX_VOL_NIDS 0x40
+
struct alc_spec {
/* codec parameterization */
const struct snd_kcontrol_new *mixers[5]; /* mixer arrays */
const hda_nid_t *capsrc_nids;
hda_nid_t dig_in_nid; /* digital-in NID; optional */
hda_nid_t mixer_nid; /* analog-mixer NID */
- DECLARE_BITMAP(vol_ctls, 0x20 << 1);
- DECLARE_BITMAP(sw_ctls, 0x20 << 1);
+ DECLARE_BITMAP(vol_ctls, MAX_VOL_NIDS << 1);
+ DECLARE_BITMAP(sw_ctls, MAX_VOL_NIDS << 1);
/* capture setup for dynamic dual-adc switch */
hda_nid_t cur_adc;
"Disabled", "Enabled"
};
static const char * const texts3[] = {
- "Disabled", "Speaker Only", "Line-Out+Speaker"
+ "Disabled", "Speaker Only", "Line Out+Speaker"
};
const char * const *texts;
"Headphone Playback Volume",
"Speaker Playback Volume",
"Mono Playback Volume",
- "Line-Out Playback Volume",
+ "Line Out Playback Volume",
+ "CLFE Playback Volume",
+ "Bass Speaker Playback Volume",
"PCM Playback Volume",
NULL,
};
"Speaker Playback Switch",
"Mono Playback Switch",
"IEC958 Playback Switch",
- "Line-Out Playback Switch",
+ "Line Out Playback Switch",
+ "CLFE Playback Switch",
+ "Bass Speaker Playback Switch",
"PCM Playback Switch",
NULL,
};
"%s Analog", codec->chip_name);
info->name = spec->stream_name_analog;
- if (spec->multiout.dac_nids > 0) {
+ if (spec->multiout.num_dacs > 0) {
p = spec->stream_analog_playback;
if (!p)
p = &alc_pcm_analog_playback;
static inline unsigned int get_ctl_pos(unsigned int data)
{
hda_nid_t nid = get_amp_nid_(data);
- unsigned int dir = get_amp_direction_(data);
+ unsigned int dir;
+ if (snd_BUG_ON(nid >= MAX_VOL_NIDS))
+ return 0;
+ dir = get_amp_direction_(data);
return (nid << 1) | dir;
}
else
nums = spec->num_adc_nids;
for (c = 0; c < nums; c++)
- alc_mux_select(codec, 0, spec->cur_mux[c], true);
+ alc_mux_select(codec, c, spec->cur_mux[c], true);
}
/* add mic boosts if needed */
ALC882_FIXUP_ACER_ASPIRE_8930G,
ALC882_FIXUP_ASPIRE_8930G_VERBS,
ALC885_FIXUP_MACPRO_GPIO,
+ ALC889_FIXUP_DAC_ROUTE,
};
static void alc889_fixup_coef(struct hda_codec *codec,
alc882_gpio_mute(codec, 1, 0);
}
+/* Fix the connection of some pins for ALC889:
+ * At least, Acer Aspire 5935 shows the connections to DAC3/4 don't
+ * work correctly (bko#42740)
+ */
+static void alc889_fixup_dac_route(struct hda_codec *codec,
+ const struct alc_fixup *fix, int action)
+{
+ if (action == ALC_FIXUP_ACT_PRE_PROBE) {
+ /* fake the connections during parsing the tree */
+ hda_nid_t conn1[2] = { 0x0c, 0x0d };
+ hda_nid_t conn2[2] = { 0x0e, 0x0f };
+ snd_hda_override_conn_list(codec, 0x14, 2, conn1);
+ snd_hda_override_conn_list(codec, 0x15, 2, conn1);
+ snd_hda_override_conn_list(codec, 0x18, 2, conn2);
+ snd_hda_override_conn_list(codec, 0x1a, 2, conn2);
+ } else if (action == ALC_FIXUP_ACT_PROBE) {
+ /* restore the connections */
+ hda_nid_t conn[5] = { 0x0c, 0x0d, 0x0e, 0x0f, 0x26 };
+ snd_hda_override_conn_list(codec, 0x14, 5, conn);
+ snd_hda_override_conn_list(codec, 0x15, 5, conn);
+ snd_hda_override_conn_list(codec, 0x18, 5, conn);
+ snd_hda_override_conn_list(codec, 0x1a, 5, conn);
+ }
+}
+
static const struct alc_fixup alc882_fixups[] = {
[ALC882_FIXUP_ABIT_AW9D_MAX] = {
.type = ALC_FIXUP_PINS,
.type = ALC_FIXUP_FUNC,
.v.func = alc885_fixup_macpro_gpio,
},
+ [ALC889_FIXUP_DAC_ROUTE] = {
+ .type = ALC_FIXUP_FUNC,
+ .v.func = alc889_fixup_dac_route,
+ },
};
static const struct snd_pci_quirk alc882_fixup_tbl[] = {
SND_PCI_QUIRK(0x1025, 0x0142, "Acer Aspire 7730G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0x0155, "Packard-Bell M5120", ALC882_FIXUP_PB_M5210),
+ SND_PCI_QUIRK(0x1025, 0x0259, "Acer Aspire 5935", ALC889_FIXUP_DAC_ROUTE),
SND_PCI_QUIRK(0x1025, 0x0296, "Acer Aspire 7736z", ALC882_FIXUP_ACER_ASPIRE_7736),
SND_PCI_QUIRK(0x1043, 0x13c2, "Asus A7M", ALC882_FIXUP_EAPD),
SND_PCI_QUIRK(0x1043, 0x1873, "ASUS W90V", ALC882_FIXUP_ASUS_W90V),
static const struct snd_pci_quirk alc861_fixup_tbl[] = {
SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", PINFIX_ASUS_A6RP),
+ SND_PCI_QUIRK(0x1584, 0x0000, "Uniwill ECS M31EI", PINFIX_ASUS_A6RP),
SND_PCI_QUIRK(0x1584, 0x2b01, "Haier W18", PINFIX_ASUS_A6RP),
SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", PINFIX_FSC_AMILO_PI1505),
{}
unsigned int val = AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN;
if (no_hp_sensing(spec, i))
continue;
- if (presence)
+ if (1 /*presence*/)
stac92xx_set_pinctl(codec, cfg->hp_pins[i], val);
#if 0 /* FIXME */
/* Resetting the pinctl like below may lead to (a sort of) regressions
spec->gpio_dir, spec->gpio_data);
} else {
notmtd_lvl = spec->gpio_led_polarity ?
- AC_PINCTL_VREF_HIZ : AC_PINCTL_VREF_GRD;
+ AC_PINCTL_VREF_50 : AC_PINCTL_VREF_GRD;
muted_lvl = spec->gpio_led_polarity ?
- AC_PINCTL_VREF_GRD : AC_PINCTL_VREF_HIZ;
+ AC_PINCTL_VREF_GRD : AC_PINCTL_VREF_50;
spec->vref_led = muted ? muted_lvl : notmtd_lvl;
stac_vrefout_set(codec, spec->vref_mute_led_nid,
spec->vref_led);
/* init input-src */
for (i = 0; i < spec->num_adc_nids; i++) {
int adc_idx = spec->inputs[spec->cur_mux[i]].adc_idx;
+ /* secondary ADCs must have the unique MUX */
+ if (i > 0 && !spec->mux_nids[i])
+ break;
if (spec->mux_nids[adc_idx]) {
int mux_idx = spec->inputs[spec->cur_mux[i]].mux_idx;
snd_hda_codec_write(codec, spec->mux_nids[adc_idx], 0,
.name = "MSI P4 ATX 645 Ultra",
.type = AC97_TUNE_HP_ONLY
},
+ {
+ .subvendor = 0x161f,
+ .subdevice = 0x202f,
+ .name = "Gateway M520",
+ .type = AC97_TUNE_INV_EAPD
+ },
{
.subvendor = 0x161f,
.subdevice = 0x203a,
mutex_lock(&chip->mutex);
reg = oxygen_read_ac97(chip, codec, index);
mutex_unlock(&chip->mutex);
- value->value.integer.value[0] = 31 - (reg & 0x1f);
- if (stereo)
- value->value.integer.value[1] = 31 - ((reg >> 8) & 0x1f);
+ if (!stereo) {
+ value->value.integer.value[0] = 31 - (reg & 0x1f);
+ } else {
+ value->value.integer.value[0] = 31 - ((reg >> 8) & 0x1f);
+ value->value.integer.value[1] = 31 - (reg & 0x1f);
+ }
return 0;
}
mutex_lock(&chip->mutex);
oldreg = oxygen_read_ac97(chip, codec, index);
- newreg = oldreg;
- newreg = (newreg & ~0x1f) |
- (31 - (value->value.integer.value[0] & 0x1f));
- if (stereo)
- newreg = (newreg & ~0x1f00) |
- ((31 - (value->value.integer.value[1] & 0x1f)) << 8);
- else
- newreg = (newreg & ~0x1f00) | ((newreg & 0x1f) << 8);
+ if (!stereo) {
+ newreg = oldreg & ~0x1f;
+ newreg |= 31 - (value->value.integer.value[0] & 0x1f);
+ } else {
+ newreg = oldreg & ~0x1f1f;
+ newreg |= (31 - (value->value.integer.value[0] & 0x1f)) << 8;
+ newreg |= 31 - (value->value.integer.value[1] & 0x1f);
+ }
change = newreg != oldreg;
if (change)
oxygen_write_ac97(chip, codec, index, newreg);
SOC_DOUBLE_R_TLV("Digital Playback Volume", L_DVC, R_DVC,
0, 0xFF, 1, out_tlv),
-
- SOC_SINGLE("Headphone Switch", PW_MGMT2, 6, 1, 0),
};
-static const struct snd_kcontrol_new ak4642_hpout_mixer_controls[] = {
- SOC_DAPM_SINGLE("DACH", MD_CTL4, 0, 1, 0),
-};
+static const struct snd_kcontrol_new ak4642_headphone_control =
+ SOC_DAPM_SINGLE("Switch", PW_MGMT2, 6, 1, 0);
static const struct snd_kcontrol_new ak4642_lout_mixer_controls[] = {
SOC_DAPM_SINGLE("DACL", SG_SL1, 4, 1, 0),
SND_SOC_DAPM_OUTPUT("HPOUTR"),
SND_SOC_DAPM_OUTPUT("LINEOUT"),
- SND_SOC_DAPM_MIXER("HPOUTL Mixer", PW_MGMT2, 5, 0,
- &ak4642_hpout_mixer_controls[0],
- ARRAY_SIZE(ak4642_hpout_mixer_controls)),
+ SND_SOC_DAPM_PGA("HPL Out", PW_MGMT2, 5, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("HPR Out", PW_MGMT2, 4, 0, NULL, 0),
+ SND_SOC_DAPM_SWITCH("Headphone Enable", SND_SOC_NOPM, 0, 0,
+ &ak4642_headphone_control),
- SND_SOC_DAPM_MIXER("HPOUTR Mixer", PW_MGMT2, 4, 0,
- &ak4642_hpout_mixer_controls[0],
- ARRAY_SIZE(ak4642_hpout_mixer_controls)),
+ SND_SOC_DAPM_PGA("DACH", MD_CTL4, 0, 0, NULL, 0),
SND_SOC_DAPM_MIXER("LINEOUT Mixer", PW_MGMT1, 3, 0,
&ak4642_lout_mixer_controls[0],
static const struct snd_soc_dapm_route ak4642_intercon[] = {
/* Outputs */
- {"HPOUTL", NULL, "HPOUTL Mixer"},
- {"HPOUTR", NULL, "HPOUTR Mixer"},
+ {"HPOUTL", NULL, "HPL Out"},
+ {"HPOUTR", NULL, "HPR Out"},
{"LINEOUT", NULL, "LINEOUT Mixer"},
- {"HPOUTL Mixer", "DACH", "DAC"},
- {"HPOUTR Mixer", "DACH", "DAC"},
+ {"HPL Out", NULL, "Headphone Enable"},
+ {"HPR Out", NULL, "Headphone Enable"},
+
+ {"Headphone Enable", "Switch", "DACH"},
+
+ {"DACH", NULL, "DAC"},
+
{"LINEOUT Mixer", "DACL", "DAC"},
};
priv->config[id].mmcc &= 0xC0;
priv->config[id].mmcc |= cs42l73_mclk_coeffs[mclk_coeff].mmcc;
priv->config[id].spc &= 0xFC;
- priv->config[id].spc &= MCK_SCLK_64FS;
+ priv->config[id].spc |= MCK_SCLK_MCLK;
} else {
/* CS42L73 Slave */
priv->config[id].spc &= 0xFC;
return 0;
}
-static const char *st_text[] = { "None", "Right", "Left" };
+static const char *st_text[] = { "None", "Left", "Right" };
static const struct soc_enum str_enum =
SOC_ENUM_SINGLE(WM8962_DAC_DSP_MIXING_1, 2, 3, st_text);
case SNDRV_PCM_FORMAT_S16_LE:
break;
case SNDRV_PCM_FORMAT_S20_3LE:
- aif0 |= 0x40;
+ aif0 |= 0x4;
break;
case SNDRV_PCM_FORMAT_S24_LE:
- aif0 |= 0x80;
+ aif0 |= 0x8;
break;
case SNDRV_PCM_FORMAT_S32_LE:
- aif0 |= 0xc0;
+ aif0 |= 0xc;
break;
default:
return -EINVAL;
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+ pm_runtime_get_sync(codec->dev);
+
wm8994->vmid_refcount++;
dev_dbg(codec->dev, "Referencing VMID, refcount is now %d\n",
WM8994_VMID_RAMP_MASK,
WM8994_STARTUP_BIAS_ENA |
WM8994_VMID_BUF_ENA |
- (0x11 << WM8994_VMID_RAMP_SHIFT));
+ (0x3 << WM8994_VMID_RAMP_SHIFT));
+
+ /* Remove discharge for line out */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_1,
+ WM8994_LINEOUT1_DISCH |
+ WM8994_LINEOUT2_DISCH, 0);
/* Main bias enable, VMID=2x40k */
snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
WM8994_VMID_BUF_ENA |
WM8994_VMID_RAMP_MASK, 0);
}
+
+ pm_runtime_put(codec->dev);
}
static int vmid_event(struct snd_soc_dapm_widget *w,
codec->cache_only = 0;
}
- /* Restore the registers */
- ret = snd_soc_cache_sync(codec);
- if (ret != 0)
- dev_err(codec->dev, "Failed to sync cache: %d\n", ret);
-
wm8994_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
for (i = 0; i < ARRAY_SIZE(wm8994->fll); i++) {
};
static const struct snd_kcontrol_new line2_mix[] = {
-SOC_DAPM_SINGLE("IN2R Switch", WM8993_LINE_MIXER2, 2, 1, 0),
-SOC_DAPM_SINGLE("IN2L Switch", WM8993_LINE_MIXER2, 1, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_LINE_MIXER2, 2, 1, 0),
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_LINE_MIXER2, 1, 1, 0),
SOC_DAPM_SINGLE("Output Switch", WM8993_LINE_MIXER2, 0, 1, 0),
};
};
static const struct snd_soc_dapm_route lineout2_diff_routes[] = {
- { "LINEOUT2 Mixer", "IN2L Switch", "IN2L PGA" },
- { "LINEOUT2 Mixer", "IN2R Switch", "IN2R PGA" },
+ { "LINEOUT2 Mixer", "IN1L Switch", "IN1L PGA" },
+ { "LINEOUT2 Mixer", "IN1R Switch", "IN1R PGA" },
{ "LINEOUT2 Mixer", "Output Switch", "Right Output PGA" },
{ "LINEOUT2N Driver", NULL, "LINEOUT2 Mixer" },
break;
case SND_SOC_DAIFMT_DSP_A:
/* data on rising edge of bclk, frame high 1clk before data */
- strcr |= SSI_STCR_TFSL | SSI_STCR_TEFS;
+ strcr |= SSI_STCR_TFSL | SSI_STCR_TXBIT0 | SSI_STCR_TEFS;
break;
}
{
struct fsi_priv *fsi = fsi_get_priv(substream);
struct fsi_stream *io = fsi_get_stream(fsi, fsi_is_play(substream));
- int samples_pos = io->buff_sample_pos - 1;
- if (samples_pos < 0)
- samples_pos = 0;
-
- return fsi_sample2frame(fsi, samples_pos);
+ return fsi_sample2frame(fsi, io->buff_sample_pos);
}
static struct snd_pcm_ops fsi_pcm_ops = {
if (!codec->suspended && codec->driver->suspend) {
switch (codec->dapm.bias_level) {
case SND_SOC_BIAS_STANDBY:
+ /*
+ * If the CODEC is capable of idle
+ * bias off then being in STANDBY
+ * means it's doing something,
+ * otherwise fall through.
+ */
+ if (codec->dapm.idle_bias_off) {
+ dev_dbg(codec->dev,
+ "idle_bias_off CODEC on over suspend\n");
+ break;
+ }
case SND_SOC_BIAS_OFF:
codec->driver->suspend(codec);
codec->suspended = 1;
* standby.
*/
if (powerdown) {
- snd_soc_dapm_set_bias_level(dapm, SND_SOC_BIAS_PREPARE);
+ if (dapm->bias_level == SND_SOC_BIAS_ON)
+ snd_soc_dapm_set_bias_level(dapm,
+ SND_SOC_BIAS_PREPARE);
dapm_seq_run(dapm, &down_list, 0, false);
- snd_soc_dapm_set_bias_level(dapm, SND_SOC_BIAS_STANDBY);
+ if (dapm->bias_level == SND_SOC_BIAS_PREPARE)
+ snd_soc_dapm_set_bias_level(dapm,
+ SND_SOC_BIAS_STANDBY);
}
}
list_for_each_entry(codec, &card->codec_dev_list, list) {
soc_dapm_shutdown_codec(&codec->dapm);
- snd_soc_dapm_set_bias_level(&codec->dapm, SND_SOC_BIAS_OFF);
+ if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY)
+ snd_soc_dapm_set_bias_level(&codec->dapm,
+ SND_SOC_BIAS_OFF);
}
}
spin_lock(&dev->spinlock);
- if (dev->input_panic || dev->output_panic)
+ if (dev->input_panic || dev->output_panic) {
ptr = SNDRV_PCM_POS_XRUN;
+ goto unlock;
+ }
if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
ptr = bytes_to_frames(sub->runtime,
ptr = bytes_to_frames(sub->runtime,
dev->audio_in_buf_pos[index]);
+unlock:
spin_unlock(&dev->spinlock);
return ptr;
}
#ifndef __USBAUDIO_CARD_H
#define __USBAUDIO_CARD_H
+#define MAX_NR_RATES 1024
#define MAX_PACKS 20
#define MAX_PACKS_HS (MAX_PACKS * 8) /* in high speed mode */
#define MAX_URBS 8
return 0;
}
-#define MAX_UAC2_NR_RATES 1024
-
/*
* Helper function to walk the array of sample rate triplets reported by
* the device. The problem is that we need to parse whole array first to
fp->rates |= snd_pcm_rate_to_rate_bit(rate);
nr_rates++;
- if (nr_rates >= MAX_UAC2_NR_RATES) {
+ if (nr_rates >= MAX_NR_RATES) {
snd_printk(KERN_ERR "invalid uac2 rates\n");
break;
}
}
}
},
+{
+ /* Edirol UM-3G */
+ USB_DEVICE_VENDOR_SPEC(0x0582, 0x0108),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ .ifnum = 0,
+ .type = QUIRK_MIDI_STANDARD_INTERFACE
+ }
+},
{
/* Boss JS-8 Jam Station */
USB_DEVICE(0x0582, 0x0109),
unsigned *rate_table = NULL;
fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
- if (! fp) {
+ if (!fp) {
snd_printk(KERN_ERR "cannot memdup\n");
return -ENOMEM;
}
+ if (fp->nr_rates > MAX_NR_RATES) {
+ kfree(fp);
+ return -EINVAL;
+ }
if (fp->nr_rates > 0) {
rate_table = kmemdup(fp->rate_table,
sizeof(int) * fp->nr_rates, GFP_KERNEL);
#include "../../../arch/x86/lib/memcpy_64.S"
+/*
+ * We need to provide note.GNU-stack section, saying that we want
+ * NOT executable stack. Otherwise the final linking will assume that
+ * the ELF stack should not be restricted at all and set it RWX.
+ */
+.section .note.GNU-stack,"",@progbits
if (size >= len)
size = len - 1;
memcpy(comm, name, size);
+ comm[size] = '\0';
} else if (memcmp(bf, "Tgid:", 5) == 0) {
char *tgids = bf + 5;
is_kernel_mmap = memcmp(event->mmap.filename,
kmmap_prefix,
- strlen(kmmap_prefix)) == 0;
+ strlen(kmmap_prefix) - 1) == 0;
if (event->mmap.filename[0] == '/' ||
(!is_kernel_mmap && event->mmap.filename[0] == '[')) {
hlist_for_each_entry(sid, pos, head, node)
if (sid->id == id)
return sid->evsel;
+
+ if (!perf_evlist__sample_id_all(evlist))
+ return list_entry(evlist->entries.next, struct perf_evsel, node);
+
return NULL;
}
memset(data, 0, sizeof(*data));
data->cpu = data->pid = data->tid = -1;
data->stream_id = data->id = data->time = -1ULL;
+ data->period = 1;
if (event->header.type != PERF_RECORD_SAMPLE) {
if (!sample_id_all)
tev->point.symbol);
ret = -ENOENT;
goto error;
+ } else if (tev->point.offset > sym->end - sym->start) {
+ pr_warning("Offset specified is greater than size of %s\n",
+ tev->point.symbol);
+ ret = -ENOENT;
+ goto error;
+
}
return 1;
static int convert_to_trace_point(Dwarf_Die *sp_die, Dwarf_Addr paddr,
bool retprobe, struct probe_trace_point *tp)
{
- Dwarf_Addr eaddr;
+ Dwarf_Addr eaddr, highaddr;
const char *name;
/* Copy the name of probe point */
dwarf_diename(sp_die));
return -ENOENT;
}
+ if (dwarf_highpc(sp_die, &highaddr) != 0) {
+ pr_warning("Failed to get end address of %s\n",
+ dwarf_diename(sp_die));
+ return -ENOENT;
+ }
+ if (paddr > highaddr) {
+ pr_warning("Offset specified is greater than size of %s\n",
+ dwarf_diename(sp_die));
+ return -EINVAL;
+ }
tp->symbol = strdup(name);
if (tp->symbol == NULL)
return -ENOMEM;
$in_bisect = 1;
my $failed = 0;
- build "oldconfig";
- start_monitor_and_boot or $failed = 1;
- end_monitor;
+ build "oldconfig" or $failed = 1;
+ if (!$failed) {
+ start_monitor_and_boot or $failed = 1;
+ end_monitor;
+ }
$in_bisect = 0;
if (memslot && memslot->dirty_bitmap) {
unsigned long rel_gfn = gfn - memslot->base_gfn;
- if (!__test_and_set_bit_le(rel_gfn, memslot->dirty_bitmap))
+ if (!test_and_set_bit_le(rel_gfn, memslot->dirty_bitmap))
memslot->nr_dirty_pages++;
}
}
projects / ~andy / linux / commitdiff