Bluetooth: Add Atheros AR3012 one PID/VID supported

The new Ath3k needs to download patch and radio table,
and it keeps same PID/VID even after downloading the patch and radio
table. This patch is to use the bcdDevice (Device Release Number) to
judge whether the chip has been patched or not. The init bcdDevice
value of the chip is 0x0001, this value increases after patch and
radio table downloading.

Signed-off-by: Steven.Li <yongli@qca.qualcomm.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 6bacef368fab2a61750751b7ead7d0673b0e8aea..a5854735bb2e7882124ad1dc2c1b9c9296c93820 100644 (file)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -375,6 +375,11 @@ static int ath3k_probe(struct usb_interface *intf,
 
        /* load patch and sysconfig files for AR3012 */
        if (id->driver_info & BTUSB_ATH3012) {
+
+               /* New firmware with patch and sysconfig files already loaded */
+               if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
+                       return -ENODEV;
+
                ret = ath3k_load_patch(udev);
                if (ret < 0) {
                        BT_ERR("Loading patch file failed");

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c2de8951e3fbe11ab876df9c12705548c0fead42..91d13a9e8c657f9b838c56ecbae6608965342bc0 100644 (file)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -54,6 +54,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_BCM92035         0x10
 #define BTUSB_BROKEN_ISOC      0x20
 #define BTUSB_WRONG_SCO_MTU    0x40
+#define BTUSB_ATH3012          0x80
 
 static struct usb_device_id btusb_table[] = {
        /* Generic Bluetooth USB device */
@@ -110,7 +111,7 @@ static struct usb_device_id blacklist_table[] = {
        { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
 
        /* Atheros 3012 with sflash firmware */
-       { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_IGNORE },
+       { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 
        /* Atheros AR5BBU12 with sflash firmware */
        { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -914,6 +915,15 @@ static int btusb_probe(struct usb_interface *intf,
        if (ignore_sniffer && id->driver_info & BTUSB_SNIFFER)
                return -ENODEV;
 
+       if (id->driver_info & BTUSB_ATH3012) {
+               struct usb_device *udev = interface_to_usbdev(intf);
+
+               /* Old firmware would otherwise let ath3k driver load
+                * patch and sysconfig files */
+               if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
+                       return -ENODEV;
+       }
+
        data = kzalloc(sizeof(*data), GFP_KERNEL);
        if (!data)
                return -ENOMEM;