]> Pileus Git - ~andy/linux/commitdiff
osdblk: a Linux block device for OSD objects
authorJeff Garzik <jeff@garzik.org>
Fri, 10 Apr 2009 11:50:45 +0000 (07:50 -0400)
committerBoaz Harrosh <bharrosh@panasas.com>
Wed, 24 Jun 2009 09:25:02 +0000 (12:25 +0300)
Submitted driver exports a block device of the form /dev/osdblkX,
where X is a decimal number.

It does that by mounting a stacking block device on top
of an osd object. For example, if you create a 2G object
on an OSD device, you can then use this module to present
that 2G object as a Linux block device.

See inside patch for exact documentation.

[Sitting at linux-next helped fix proper Kconfig dependency
 for this driver, thanks to Randy Dunlap]

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
drivers/block/Kconfig
drivers/block/Makefile
drivers/block/osdblk.c [new file with mode: 0644]

index bb72ada9f074588e49796267b59600f848a615be..1d886e079c588e70951965b7a67192b962967c16 100644 (file)
@@ -298,6 +298,22 @@ config BLK_DEV_NBD
 
          If unsure, say N.
 
+config BLK_DEV_OSD
+       tristate "OSD object-as-blkdev support"
+       depends on SCSI_OSD_ULD
+       ---help---
+         Saying Y or M here will allow the exporting of a single SCSI
+         OSD (object-based storage) object as a Linux block device.
+
+         For example, if you create a 2G object on an OSD device,
+         you can then use this module to present that 2G object as
+         a Linux block device.
+
+         To compile this driver as a module, choose M here: the
+         module will be called osdblk.
+
+         If unsure, say N.
+
 config BLK_DEV_SX8
        tristate "Promise SATA SX8 support"
        depends on PCI
index 7755a5e2a85e3b5a7ffcfe1544ce507df050764d..cdaa3f8fddf03f324bfe72b92b2ad884e5e1af0a 100644 (file)
@@ -23,6 +23,7 @@ obj-$(CONFIG_XILINX_SYSACE)   += xsysace.o
 obj-$(CONFIG_CDROM_PKTCDVD)    += pktcdvd.o
 obj-$(CONFIG_MG_DISK)          += mg_disk.o
 obj-$(CONFIG_SUNVDC)           += sunvdc.o
+obj-$(CONFIG_BLK_DEV_OSD)      += osdblk.o
 
 obj-$(CONFIG_BLK_DEV_UMEM)     += umem.o
 obj-$(CONFIG_BLK_DEV_NBD)      += nbd.o
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
new file mode 100644 (file)
index 0000000..3565d0d
--- /dev/null
@@ -0,0 +1,694 @@
+
+/*
+   osdblk.c -- Export a single SCSI OSD object as a Linux block device
+
+
+   Copyright 2009 Red Hat, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+   Instructions for use
+   --------------------
+
+   1) Map a Linux block device to an existing OSD object.
+
+      In this example, we will use partition id 1234, object id 5678,
+      OSD device /dev/osd1.
+
+      $ echo "1234 5678 /dev/osd1" > /sys/class/osdblk/add
+
+
+   2) List all active blkdev<->object mappings.
+
+      In this example, we have performed step #1 twice, creating two blkdevs,
+      mapped to two separate OSD objects.
+
+      $ cat /sys/class/osdblk/list
+      0 174 1234 5678 /dev/osd1
+      1 179 1994 897123 /dev/osd0
+
+      The columns, in order, are:
+      - blkdev unique id
+      - blkdev assigned major
+      - OSD object partition id
+      - OSD object id
+      - OSD device
+
+
+   3) Remove an active blkdev<->object mapping.
+
+      In this example, we remove the mapping with blkdev unique id 1.
+
+      $ echo 1 > /sys/class/osdblk/remove
+
+
+   NOTE:  The actual creation and deletion of OSD objects is outside the scope
+   of this driver.
+
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <scsi/osd_initiator.h>
+#include <scsi/osd_attributes.h>
+#include <scsi/osd_sec.h>
+
+#define DRV_NAME "osdblk"
+#define PFX DRV_NAME ": "
+
+/* #define _OSDBLK_DEBUG */
+#ifdef _OSDBLK_DEBUG
+#define OSDBLK_DEBUG(fmt, a...) \
+       printk(KERN_NOTICE "osdblk @%s:%d: " fmt, __func__, __LINE__, ##a)
+#else
+#define OSDBLK_DEBUG(fmt, a...) \
+       do { if (0) printk(fmt, ##a); } while (0)
+#endif
+
+MODULE_AUTHOR("Jeff Garzik <jeff@garzik.org>");
+MODULE_DESCRIPTION("block device inside an OSD object osdblk.ko");
+MODULE_LICENSE("GPL");
+
+struct osdblk_device;
+
+enum {
+       OSDBLK_MINORS_PER_MAJOR = 256,          /* max minors per blkdev */
+       OSDBLK_MAX_REQ          = 32,           /* max parallel requests */
+       OSDBLK_OP_TIMEOUT       = 4 * 60,       /* sync OSD req timeout */
+};
+
+struct osdblk_request {
+       struct request          *rq;            /* blk layer request */
+       struct bio              *bio;           /* cloned bio */
+       struct osdblk_device    *osdev;         /* associated blkdev */
+};
+
+struct osdblk_device {
+       int                     id;             /* blkdev unique id */
+
+       int                     major;          /* blkdev assigned major */
+       struct gendisk          *disk;          /* blkdev's gendisk and rq */
+       struct request_queue    *q;
+
+       struct osd_dev          *osd;           /* associated OSD */
+
+       char                    name[32];       /* blkdev name, e.g. osdblk34 */
+
+       spinlock_t              lock;           /* queue lock */
+
+       struct osd_obj_id       obj;            /* OSD partition, obj id */
+       uint8_t                 obj_cred[OSD_CAP_LEN]; /* OSD cred */
+
+       struct osdblk_request   req[OSDBLK_MAX_REQ]; /* request table */
+
+       struct list_head        node;
+
+       char                    osd_path[0];    /* OSD device path */
+};
+
+static struct class *class_osdblk;             /* /sys/class/osdblk */
+static DEFINE_MUTEX(ctl_mutex);        /* Serialize open/close/setup/teardown */
+static LIST_HEAD(osdblkdev_list);
+
+static struct block_device_operations osdblk_bd_ops = {
+       .owner          = THIS_MODULE,
+};
+
+static const struct osd_attr g_attr_logical_length = ATTR_DEF(
+       OSD_APAGE_OBJECT_INFORMATION, OSD_ATTR_OI_LOGICAL_LENGTH, 8);
+
+static void osdblk_make_credential(u8 cred_a[OSD_CAP_LEN],
+                                  const struct osd_obj_id *obj)
+{
+       osd_sec_init_nosec_doall_caps(cred_a, obj, false, true);
+}
+
+/* copied from exofs; move to libosd? */
+/*
+ * Perform a synchronous OSD operation.  copied from exofs; move to libosd?
+ */
+static int osd_sync_op(struct osd_request *or, int timeout, uint8_t *credential)
+{
+       int ret;
+
+       or->timeout = timeout;
+       ret = osd_finalize_request(or, 0, credential, NULL);
+       if (ret)
+               return ret;
+
+       ret = osd_execute_request(or);
+
+       /* osd_req_decode_sense(or, ret); */
+       return ret;
+}
+
+/*
+ * Perform an asynchronous OSD operation.  copied from exofs; move to libosd?
+ */
+static int osd_async_op(struct osd_request *or, osd_req_done_fn *async_done,
+                  void *caller_context, u8 *cred)
+{
+       int ret;
+
+       ret = osd_finalize_request(or, 0, cred, NULL);
+       if (ret)
+               return ret;
+
+       ret = osd_execute_request_async(or, async_done, caller_context);
+
+       return ret;
+}
+
+/* copied from exofs; move to libosd? */
+static int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr)
+{
+       struct osd_attr cur_attr = {.attr_page = 0}; /* start with zeros */
+       void *iter = NULL;
+       int nelem;
+
+       do {
+               nelem = 1;
+               osd_req_decode_get_attr_list(or, &cur_attr, &nelem, &iter);
+               if ((cur_attr.attr_page == attr->attr_page) &&
+                   (cur_attr.attr_id == attr->attr_id)) {
+                       attr->len = cur_attr.len;
+                       attr->val_ptr = cur_attr.val_ptr;
+                       return 0;
+               }
+       } while (iter);
+
+       return -EIO;
+}
+
+static int osdblk_get_obj_size(struct osdblk_device *osdev, u64 *size_out)
+{
+       struct osd_request *or;
+       struct osd_attr attr;
+       int ret;
+
+       /* start request */
+       or = osd_start_request(osdev->osd, GFP_KERNEL);
+       if (!or)
+               return -ENOMEM;
+
+       /* create a get-attributes(length) request */
+       osd_req_get_attributes(or, &osdev->obj);
+
+       osd_req_add_get_attr_list(or, &g_attr_logical_length, 1);
+
+       /* execute op synchronously */
+       ret = osd_sync_op(or, OSDBLK_OP_TIMEOUT, osdev->obj_cred);
+       if (ret)
+               goto out;
+
+       /* extract length from returned attribute info */
+       attr = g_attr_logical_length;
+       ret = extract_attr_from_req(or, &attr);
+       if (ret)
+               goto out;
+
+       *size_out = get_unaligned_be64(attr.val_ptr);
+
+out:
+       osd_end_request(or);
+       return ret;
+
+}
+
+static void osdblk_osd_complete(struct osd_request *or, void *private)
+{
+       struct osdblk_request *orq = private;
+       struct osd_sense_info osi;
+       int ret = osd_req_decode_sense(or, &osi);
+
+       if (ret) {
+               ret = -EIO;
+               OSDBLK_DEBUG("osdblk_osd_complete with err=%d\n", ret);
+       }
+
+       /* complete OSD request */
+       osd_end_request(or);
+
+       /* complete request passed to osdblk by block layer */
+       __blk_end_request_all(orq->rq, ret);
+}
+
+static void bio_chain_put(struct bio *chain)
+{
+       struct bio *tmp;
+
+       while (chain) {
+               tmp = chain;
+               chain = chain->bi_next;
+
+               bio_put(tmp);
+       }
+}
+
+static struct bio *bio_chain_clone(struct bio *old_chain, gfp_t gfpmask)
+{
+       struct bio *tmp, *new_chain = NULL, *tail = NULL;
+
+       while (old_chain) {
+               tmp = bio_kmalloc(gfpmask, old_chain->bi_max_vecs);
+               if (!tmp)
+                       goto err_out;
+
+               __bio_clone(tmp, old_chain);
+               tmp->bi_bdev = NULL;
+               gfpmask &= ~__GFP_WAIT;
+               tmp->bi_next = NULL;
+
+               if (!new_chain)
+                       new_chain = tail = tmp;
+               else {
+                       tail->bi_next = tmp;
+                       tail = tmp;
+               }
+
+               old_chain = old_chain->bi_next;
+       }
+
+       return new_chain;
+
+err_out:
+       OSDBLK_DEBUG("bio_chain_clone with err\n");
+       bio_chain_put(new_chain);
+       return NULL;
+}
+
+static void osdblk_rq_fn(struct request_queue *q)
+{
+       struct osdblk_device *osdev = q->queuedata;
+
+       while (1) {
+               struct request *rq;
+               struct osdblk_request *orq;
+               struct osd_request *or;
+               struct bio *bio;
+               bool do_write, do_flush;
+
+               /* peek at request from block layer */
+               rq = blk_fetch_request(q);
+               if (!rq)
+                       break;
+
+               /* filter out block requests we don't understand */
+               if (!blk_fs_request(rq) && !blk_barrier_rq(rq)) {
+                       blk_end_request_all(rq, 0);
+                       continue;
+               }
+
+               /* deduce our operation (read, write, flush) */
+               /* I wish the block layer simplified cmd_type/cmd_flags/cmd[]
+                * into a clearly defined set of RPC commands:
+                * read, write, flush, scsi command, power mgmt req,
+                * driver-specific, etc.
+                */
+
+               do_flush = (rq->special == (void *) 0xdeadbeefUL);
+               do_write = (rq_data_dir(rq) == WRITE);
+
+               if (!do_flush) { /* osd_flush does not use a bio */
+                       /* a bio clone to be passed down to OSD request */
+                       bio = bio_chain_clone(rq->bio, GFP_ATOMIC);
+                       if (!bio)
+                               break;
+               } else
+                       bio = NULL;
+
+               /* alloc internal OSD request, for OSD command execution */
+               or = osd_start_request(osdev->osd, GFP_ATOMIC);
+               if (!or) {
+                       bio_chain_put(bio);
+                       OSDBLK_DEBUG("osd_start_request with err\n");
+                       break;
+               }
+
+               orq = &osdev->req[rq->tag];
+               orq->rq = rq;
+               orq->bio = bio;
+               orq->osdev = osdev;
+
+               /* init OSD command: flush, write or read */
+               if (do_flush)
+                       osd_req_flush_object(or, &osdev->obj,
+                                            OSD_CDB_FLUSH_ALL, 0, 0);
+               else if (do_write)
+                       osd_req_write(or, &osdev->obj, blk_rq_pos(rq) * 512ULL,
+                                     bio, blk_rq_bytes(rq));
+               else
+                       osd_req_read(or, &osdev->obj, blk_rq_pos(rq) * 512ULL,
+                                    bio, blk_rq_bytes(rq));
+
+               OSDBLK_DEBUG("%s 0x%x bytes at 0x%llx\n",
+                       do_flush ? "flush" : do_write ?
+                               "write" : "read", blk_rq_bytes(rq),
+                       blk_rq_pos(rq) * 512ULL);
+
+               /* begin OSD command execution */
+               if (osd_async_op(or, osdblk_osd_complete, orq,
+                                osdev->obj_cred)) {
+                       osd_end_request(or);
+                       blk_requeue_request(q, rq);
+                       bio_chain_put(bio);
+                       OSDBLK_DEBUG("osd_execute_request_async with err\n");
+                       break;
+               }
+
+               /* remove the special 'flush' marker, now that the command
+                * is executing
+                */
+               rq->special = NULL;
+       }
+}
+
+static void osdblk_prepare_flush(struct request_queue *q, struct request *rq)
+{
+       /* add driver-specific marker, to indicate that this request
+        * is a flush command
+        */
+       rq->special = (void *) 0xdeadbeefUL;
+}
+
+static void osdblk_free_disk(struct osdblk_device *osdev)
+{
+       struct gendisk *disk = osdev->disk;
+
+       if (!disk)
+               return;
+
+       if (disk->flags & GENHD_FL_UP)
+               del_gendisk(disk);
+       if (disk->queue)
+               blk_cleanup_queue(disk->queue);
+       put_disk(disk);
+}
+
+static int osdblk_init_disk(struct osdblk_device *osdev)
+{
+       struct gendisk *disk;
+       struct request_queue *q;
+       int rc;
+       u64 obj_size = 0;
+
+       /* contact OSD, request size info about the object being mapped */
+       rc = osdblk_get_obj_size(osdev, &obj_size);
+       if (rc)
+               return rc;
+
+       /* create gendisk info */
+       disk = alloc_disk(OSDBLK_MINORS_PER_MAJOR);
+       if (!disk)
+               return -ENOMEM;
+
+       sprintf(disk->disk_name, DRV_NAME "%d", osdev->id);
+       disk->major = osdev->major;
+       disk->first_minor = 0;
+       disk->fops = &osdblk_bd_ops;
+       disk->private_data = osdev;
+
+       /* init rq */
+       q = blk_init_queue(osdblk_rq_fn, &osdev->lock);
+       if (!q) {
+               put_disk(disk);
+               return -ENOMEM;
+       }
+
+       /* switch queue to TCQ mode; allocate tag map */
+       rc = blk_queue_init_tags(q, OSDBLK_MAX_REQ, NULL);
+       if (rc) {
+               blk_cleanup_queue(q);
+               put_disk(disk);
+               return rc;
+       }
+
+       blk_queue_prep_rq(q, blk_queue_start_tag);
+       blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, osdblk_prepare_flush);
+
+       disk->queue = q;
+
+       q->queuedata = osdev;
+
+       osdev->disk = disk;
+       osdev->q = q;
+
+       /* finally, announce the disk to the world */
+       set_capacity(disk, obj_size / 512ULL);
+       add_disk(disk);
+
+       printk(KERN_INFO "%s: Added of size 0x%llx\n",
+               disk->disk_name, (unsigned long long)obj_size);
+
+       return 0;
+}
+
+/********************************************************************
+ * /sys/class/osdblk/
+ *                   add       map OSD object to blkdev
+ *                   remove    unmap OSD object
+ *                   list      show mappings
+ *******************************************************************/
+
+static void class_osdblk_release(struct class *cls)
+{
+       kfree(cls);
+}
+
+static ssize_t class_osdblk_list(struct class *c, char *data)
+{
+       int n = 0;
+       struct list_head *tmp;
+
+       mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+       list_for_each(tmp, &osdblkdev_list) {
+               struct osdblk_device *osdev;
+
+               osdev = list_entry(tmp, struct osdblk_device, node);
+
+               n += sprintf(data+n, "%d %d %llu %llu %s\n",
+                       osdev->id,
+                       osdev->major,
+                       osdev->obj.partition,
+                       osdev->obj.id,
+                       osdev->osd_path);
+       }
+
+       mutex_unlock(&ctl_mutex);
+       return n;
+}
+
+static ssize_t class_osdblk_add(struct class *c, const char *buf, size_t count)
+{
+       struct osdblk_device *osdev;
+       ssize_t rc;
+       int irc, new_id = 0;
+       struct list_head *tmp;
+
+       if (!try_module_get(THIS_MODULE))
+               return -ENODEV;
+
+       /* new osdblk_device object */
+       osdev = kzalloc(sizeof(*osdev) + strlen(buf) + 1, GFP_KERNEL);
+       if (!osdev) {
+               rc = -ENOMEM;
+               goto err_out_mod;
+       }
+
+       /* static osdblk_device initialization */
+       spin_lock_init(&osdev->lock);
+       INIT_LIST_HEAD(&osdev->node);
+
+       /* generate unique id: find highest unique id, add one */
+
+       mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+       list_for_each(tmp, &osdblkdev_list) {
+               struct osdblk_device *osdev;
+
+               osdev = list_entry(tmp, struct osdblk_device, node);
+               if (osdev->id > new_id)
+                       new_id = osdev->id + 1;
+       }
+
+       osdev->id = new_id;
+
+       /* add to global list */
+       list_add_tail(&osdev->node, &osdblkdev_list);
+
+       mutex_unlock(&ctl_mutex);
+
+       /* parse add command */
+       if (sscanf(buf, "%llu %llu %s", &osdev->obj.partition, &osdev->obj.id,
+                  osdev->osd_path) != 3) {
+               rc = -EINVAL;
+               goto err_out_slot;
+       }
+
+       /* initialize rest of new object */
+       sprintf(osdev->name, DRV_NAME "%d", osdev->id);
+
+       /* contact requested OSD */
+       osdev->osd = osduld_path_lookup(osdev->osd_path);
+       if (IS_ERR(osdev->osd)) {
+               rc = PTR_ERR(osdev->osd);
+               goto err_out_slot;
+       }
+
+       /* build OSD credential */
+       osdblk_make_credential(osdev->obj_cred, &osdev->obj);
+
+       /* register our block device */
+       irc = register_blkdev(0, osdev->name);
+       if (irc < 0) {
+               rc = irc;
+               goto err_out_osd;
+       }
+
+       osdev->major = irc;
+
+       /* set up and announce blkdev mapping */
+       rc = osdblk_init_disk(osdev);
+       if (rc)
+               goto err_out_blkdev;
+
+       return count;
+
+err_out_blkdev:
+       unregister_blkdev(osdev->major, osdev->name);
+err_out_osd:
+       osduld_put_device(osdev->osd);
+err_out_slot:
+       mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+       list_del_init(&osdev->node);
+       mutex_unlock(&ctl_mutex);
+
+       kfree(osdev);
+err_out_mod:
+       OSDBLK_DEBUG("Error adding device %s\n", buf);
+       module_put(THIS_MODULE);
+       return rc;
+}
+
+static ssize_t class_osdblk_remove(struct class *c, const char *buf,
+                                       size_t count)
+{
+       struct osdblk_device *osdev = NULL;
+       int target_id, rc;
+       unsigned long ul;
+       struct list_head *tmp;
+
+       rc = strict_strtoul(buf, 10, &ul);
+       if (rc)
+               return rc;
+
+       /* convert to int; abort if we lost anything in the conversion */
+       target_id = (int) ul;
+       if (target_id != ul)
+               return -EINVAL;
+
+       /* remove object from list immediately */
+       mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+       list_for_each(tmp, &osdblkdev_list) {
+               osdev = list_entry(tmp, struct osdblk_device, node);
+               if (osdev->id == target_id) {
+                       list_del_init(&osdev->node);
+                       break;
+               }
+               osdev = NULL;
+       }
+
+       mutex_unlock(&ctl_mutex);
+
+       if (!osdev)
+               return -ENOENT;
+
+       /* clean up and free blkdev and associated OSD connection */
+       osdblk_free_disk(osdev);
+       unregister_blkdev(osdev->major, osdev->name);
+       osduld_put_device(osdev->osd);
+       kfree(osdev);
+
+       /* release module ref */
+       module_put(THIS_MODULE);
+
+       return count;
+}
+
+static struct class_attribute class_osdblk_attrs[] = {
+       __ATTR(add,     0200, NULL, class_osdblk_add),
+       __ATTR(remove,  0200, NULL, class_osdblk_remove),
+       __ATTR(list,    0444, class_osdblk_list, NULL),
+       __ATTR_NULL
+};
+
+static int osdblk_sysfs_init(void)
+{
+       int ret = 0;
+
+       /*
+        * create control files in sysfs
+        * /sys/class/osdblk/...
+        */
+       class_osdblk = kzalloc(sizeof(*class_osdblk), GFP_KERNEL);
+       if (!class_osdblk)
+               return -ENOMEM;
+
+       class_osdblk->name = DRV_NAME;
+       class_osdblk->owner = THIS_MODULE;
+       class_osdblk->class_release = class_osdblk_release;
+       class_osdblk->class_attrs = class_osdblk_attrs;
+
+       ret = class_register(class_osdblk);
+       if (ret) {
+               kfree(class_osdblk);
+               class_osdblk = NULL;
+               printk(PFX "failed to create class osdblk\n");
+               return ret;
+       }
+
+       return 0;
+}
+
+static void osdblk_sysfs_cleanup(void)
+{
+       if (class_osdblk)
+               class_destroy(class_osdblk);
+       class_osdblk = NULL;
+}
+
+static int __init osdblk_init(void)
+{
+       int rc;
+
+       rc = osdblk_sysfs_init();
+       if (rc)
+               return rc;
+
+       return 0;
+}
+
+static void __exit osdblk_exit(void)
+{
+       osdblk_sysfs_cleanup();
+}
+
+module_init(osdblk_init);
+module_exit(osdblk_exit);
+