--- /dev/null
+/*
+ * Device Tree Source for the MPC5121e based ac14xx board
+ *
+ * Copyright 2012 Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/include/ "mpc5121.dtsi"
+
+/ {
+ model = "ac14xx";
+ compatible = "ifm,ac14xx", "fsl,mpc5121";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial7;
+ spi4 = &spi4;
+ spi5 = &spi5;
+ };
+
+ cpus {
+ PowerPC,5121@0 {
+ timebase-frequency = <40000000>; /* 40 MHz (csb/4) */
+ bus-frequency = <160000000>; /* 160 MHz csb bus */
+ clock-frequency = <400000000>; /* 400 MHz ppc core */
+ };
+ };
+
+ memory {
+ reg = <0x00000000 0x10000000>; /* 256MB at 0 */
+ };
+
+ nfc@40000000 {
+ status = "disabled";
+ };
+
+ localbus@80000020 {
+ ranges = <0x0 0x0 0xfc000000 0x04000000 /* CS0: NOR flash */
+ 0x1 0x0 0xe0000000 0x00010000 /* CS1: FRAM */
+ 0x2 0x0 0xe0100000 0x00080000 /* CS2: asi1 */
+ 0x3 0x0 0xe0300000 0x00020000 /* CS3: comm */
+ 0x5 0x0 0xe0400000 0x00010000 /* CS5: safety */
+ 0x6 0x0 0xe0200000 0x00080000>; /* CS6: asi2 */
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0x00000000 0x04000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partition@0 {
+ label = "dtb-kernel-production";
+ reg = <0x00000000 0x00400000>;
+ };
+ partition@1 {
+ label = "filesystem-production";
+ reg = <0x00400000 0x03400000>;
+ };
+
+ partition@2 {
+ label = "recovery";
+ reg = <0x03800000 0x00700000>;
+ };
+
+ partition@3 {
+ label = "uboot-code";
+ reg = <0x03f00000 0x00040000>;
+ };
+ partition@4 {
+ label = "uboot-env1";
+ reg = <0x03f40000 0x00020000>;
+ };
+ partition@5 {
+ label = "uboot-env2";
+ reg = <0x03f60000 0x00020000>;
+ };
+ };
+
+ fram@1,0 {
+ compatible = "ifm,ac14xx-fram", "linux,uio-pdrv-genirq";
+ reg = <1 0x00000000 0x00010000>;
+ };
+
+ asi@2,0 {
+ /* masters mapping: CS, CS offset, size */
+ reg = <2 0x00000000 0x00080000
+ 6 0x00000000 0x00080000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ifm,ac14xx-asi-fpga";
+ gpios = <
+ &gpio_pic 26 0 /* prog */
+ &gpio_pic 27 0 /* done */
+ &gpio_pic 10 0 /* reset */
+ >;
+
+ master@1 {
+ interrupts = <20 0x2>;
+ interrupt-parent = <&gpio_pic>;
+ chipselect = <2 0x00009000 0x00009100>;
+ label = "AS-i master 1";
+ };
+
+ master@2 {
+ interrupts = <21 0x2>;
+ interrupt-parent = <&gpio_pic>;
+ chipselect = <6 0x00009000 0x00009100>;
+ label = "AS-i master 2";
+ };
+ };
+
+ netx@3,0 {
+ compatible = "ifm,netx";
+ reg = <0x3 0x00000000 0x00020000>;
+ chipselect = <3 0x00101140 0x00203100>;
+ interrupts = <17 0x8>;
+ gpios = <&gpio_pic 15 0>;
+ };
+
+ safety@5,0 {
+ compatible = "ifm,safety";
+ reg = <0x5 0x00000000 0x00010000>;
+ chipselect = <5 0x00009000 0x00009100>;
+ interrupts = <22 0x2>;
+ interrupt-parent = <&gpio_pic>;
+ gpios = <
+ &gpio_pic 12 0 /* prog */
+ &gpio_pic 11 0 /* done */
+ >;
+ };
+ };
+
+ soc@80000000 {
+
+ clock@f00 {
+ compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock";
+ };
+
+ /*
+ * GPIO PIC:
+ * interrupts cell = <pin nr, sense>
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ gpio_pic: gpio@1100 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sdhc@1500 {
+ cd-gpios = <&gpio_pic 23 0>; /* card detect */
+ wp-gpios = <&gpio_pic 24 0>; /* write protect */
+ wp-inverted; /* WP active high */
+ };
+
+ i2c@1700 {
+ /* use Fast-mode */
+ clock-frequency = <400000>;
+
+ at24@30 {
+ compatible = "at24,24c01";
+ reg = <0x30>;
+ };
+
+ at24@31 {
+ compatible = "at24,24c01";
+ reg = <0x31>;
+ };
+
+ temp@48 {
+ compatible = "ad,ad7414";
+ reg = <0x48>;
+ };
+
+ at24@50 {
+ compatible = "at24,24c01";
+ reg = <0x50>;
+ };
+
+ at24@51 {
+ compatible = "at24,24c01";
+ reg = <0x51>;
+ };
+
+ at24@52 {
+ compatible = "at24,24c01";
+ reg = <0x52>;
+ };
+
+ at24@53 {
+ compatible = "at24,24c01";
+ reg = <0x53>;
+ };
+
+ at24@54 {
+ compatible = "at24,24c01";
+ reg = <0x54>;
+ };
+
+ at24@55 {
+ compatible = "at24,24c01";
+ reg = <0x55>;
+ };
+
+ at24@56 {
+ compatible = "at24,24c01";
+ reg = <0x56>;
+ };
+
+ at24@57 {
+ compatible = "at24,24c01";
+ reg = <0x57>;
+ };
+
+ rtc@68 {
+ compatible = "stm,m41t00";
+ reg = <0x68>;
+ };
+ };
+
+ axe_pic: axe-base@2000 {
+ compatible = "fsl,mpc5121-axe-base";
+ reg = <0x2000 0x100>;
+ interrupts = <42 0x8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ axe-app {
+ compatible = "fsl,mpc5121-axe-app";
+ interrupt-parent = <&axe_pic>;
+ interrupts = <
+ /* soft interrupts */
+ 0 0x0 1 0x0 2 0x0 3 0x0
+ 4 0x0 5 0x0 6 0x0 7 0x0
+ /* fifo interrupts */
+ 8 0x0 9 0x0 10 0x0 11 0x0
+ >;
+ };
+
+ display@2100 {
+ edid = [00 FF FF FF FF FF FF 00 14 94 00 00 00 00 00 00
+ 0A 12 01 03 80 1C 23 78 CA 88 FF 94 52 54 8E 27
+ 1E 4C 50 00 00 00 01 01 01 01 01 01 01 01 01 01
+ 01 01 01 01 01 01 FB 00 B0 14 00 DC 05 00 08 04
+ 21 00 1C 23 00 00 00 18 00 00 00 FD 00 38 3C 1F
+ 3C 01 0A 20 20 20 20 20 20 20 00 00 00 FC 00 45
+ 54 30 31 38 30 30 33 44 4D 55 0A 0A 00 00 00 10
+ 00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D5];
+ };
+
+ can@2300 {
+ status = "disabled";
+ };
+
+ can@2380 {
+ status = "disabled";
+ };
+
+ viu@2400 {
+ status = "disabled";
+ };
+
+ mdio@2800 {
+ phy0: ethernet-phy@1f {
+ compatible = "smsc,lan8700";
+ reg = <0x1f>;
+ };
+ };
+
+ enet: ethernet@2800 {
+ phy-handle = <&phy0>;
+ };
+
+ usb@3000 {
+ status = "disabled";
+ };
+
+ usb@4000 {
+ status = "disabled";
+ };
+
+ /* PSC3 serial port A, aka ttyPSC0 */
+ serial0: psc@11300 {
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+ fsl,rx-fifo-size = <512>;
+ fsl,tx-fifo-size = <512>;
+ };
+
+ /* PSC4 in SPI mode */
+ spi4: psc@11400 {
+ compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
+ fsl,rx-fifo-size = <768>;
+ fsl,tx-fifo-size = <768>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <1>;
+ cs-gpios = <&gpio_pic 25 0>;
+
+ flash: m25p128@0 {
+ compatible = "st,m25p128";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "spi-flash0";
+ reg = <0x00000000 0x01000000>;
+ };
+ };
+ };
+
+ /* PSC5 in SPI mode */
+ spi5: psc@11500 {
+ compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
+ fsl,mode = "spi-master";
+ fsl,rx-fifo-size = <128>;
+ fsl,tx-fifo-size = <128>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lcd@0 {
+ compatible = "ilitek,ili922x";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+ };
+ };
+
+ /* PSC7 serial port C, aka ttyPSC2 */
+ serial7: psc@11700 {
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+ fsl,rx-fifo-size = <512>;
+ fsl,tx-fifo-size = <512>;
+ };
+
+ matrix_keypad@0 {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <1>;
+ gpio-activelow;
+ col-gpios-binary;
+ col-switch-delay-ms = <200>;
+
+ col-gpios = <&gpio_pic 1 0>; /* pin1 */
+
+ row-gpios = <&gpio_pic 2 0 /* pin2 */
+ &gpio_pic 3 0 /* pin3 */
+ &gpio_pic 4 0>; /* pin4 */
+
+ linux,keymap = <0x0000006e /* FN LEFT */
+ 0x01000067 /* UP */
+ 0x02000066 /* FN RIGHT */
+ 0x00010069 /* LEFT */
+ 0x0101006a /* DOWN */
+ 0x0201006c>; /* RIGHT */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ backlight {
+ label = "backlight";
+ gpios = <&gpio_pic 0 0>;
+ default-state = "keep";
+ };
+ green {
+ label = "green";
+ gpios = <&gpio_pic 18 0>;
+ default-state = "keep";
+ };
+ red {
+ label = "red";
+ gpios = <&gpio_pic 19 0>;
+ default-state = "keep";
+ };
+ };
+};
interrupts = <40 0x8>;
};
- dma@14000 {
+ dma0: dma@14000 {
compatible = "fsl,mpc5121-dma";
reg = <0x14000 0x1800>;
interrupts = <65 0x8>;
/ {
model = "mpc5121ads";
- compatible = "fsl,mpc5121ads";
+ compatible = "fsl,mpc5121ads", "fsl,mpc5121";
nfc@40000000 {
/*
--- /dev/null
+/*
+ * STx/Freescale ADS5125 MPC5125 silicon
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved.
+ *
+ * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
+ * Copyright (C) 2013 Sirius Electronic Systems
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "mpc5125twr"; // In BSP "mpc5125ads"
+ compatible = "fsl,mpc5125ads", "fsl,mpc5125";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&ipic>;
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ ethernet0 = ð0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5125@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <0x20>; // 32 bytes
+ i-cache-line-size = <0x20>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
+ bus-frequency = <198000000>; // 198 MHz csb bus
+ clock-frequency = <396000000>; // 396 MHz ppc core
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; // 256MB at 0
+ };
+
+ sram@30000000 {
+ compatible = "fsl,mpc5121-sram";
+ reg = <0x30000000 0x08000>; // 32K at 0x30000000
+ };
+
+ soc@80000000 {
+ compatible = "fsl,mpc5121-immr";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ ranges = <0x0 0x80000000 0x400000>;
+ reg = <0x80000000 0x400000>;
+ bus-frequency = <66000000>; // 66 MHz ips bus
+
+ // IPIC
+ // interrupts cell = <intr #, sense>
+ // sense values match linux IORESOURCE_IRQ_* defines:
+ // sense == 8: Level, low assertion
+ // sense == 2: Edge, high-to-low change
+ //
+ ipic: interrupt-controller@c00 {
+ compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0xc00 0x100>;
+ };
+
+ rtc@a00 { // Real time clock
+ compatible = "fsl,mpc5121-rtc";
+ reg = <0xa00 0x100>;
+ interrupts = <79 0x8 80 0x8>;
+ };
+
+ reset@e00 { // Reset module
+ compatible = "fsl,mpc5125-reset";
+ reg = <0xe00 0x100>;
+ };
+
+ clock@f00 { // Clock control
+ compatible = "fsl,mpc5121-clock";
+ reg = <0xf00 0x100>;
+ };
+
+ pmc@1000{ // Power Management Controller
+ compatible = "fsl,mpc5121-pmc";
+ reg = <0x1000 0x100>;
+ interrupts = <83 0x2>;
+ };
+
+ gpio0: gpio@1100 {
+ compatible = "fsl,mpc5125-gpio";
+ reg = <0x1100 0x080>;
+ interrupts = <78 0x8>;
+ };
+
+ gpio1: gpio@1180 {
+ compatible = "fsl,mpc5125-gpio";
+ reg = <0x1180 0x080>;
+ interrupts = <86 0x8>;
+ };
+
+ can@1300 { // CAN rev.2
+ compatible = "fsl,mpc5121-mscan";
+ interrupts = <12 0x8>;
+ reg = <0x1300 0x80>;
+ };
+
+ can@1380 {
+ compatible = "fsl,mpc5121-mscan";
+ interrupts = <13 0x8>;
+ reg = <0x1380 0x80>;
+ };
+
+ sdhc@1500 {
+ compatible = "fsl,mpc5121-sdhc";
+ interrupts = <8 0x8>;
+ reg = <0x1500 0x100>;
+ };
+
+ i2c@1700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1700 0x20>;
+ interrupts = <0x9 0x8>;
+ };
+
+ i2c@1720 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1720 0x20>;
+ interrupts = <0xa 0x8>;
+ };
+
+ i2c@1740 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1740 0x20>;
+ interrupts = <0xb 0x8>;
+ };
+
+ i2ccontrol@1760 {
+ compatible = "fsl,mpc5121-i2c-ctrl";
+ reg = <0x1760 0x8>;
+ };
+
+ diu@2100 {
+ compatible = "fsl,mpc5121-diu";
+ reg = <0x2100 0x100>;
+ interrupts = <64 0x8>;
+ };
+
+ mdio@2800 {
+ compatible = "fsl,mpc5121-fec-mdio";
+ reg = <0x2800 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+ };
+
+ eth0: ethernet@2800 {
+ compatible = "fsl,mpc5125-fec";
+ reg = <0x2800 0x800>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <4 0x8>;
+ phy-handle = < &phy0 >;
+ phy-connection-type = "rmii";
+ };
+
+ // IO control
+ ioctl@a000 {
+ compatible = "fsl,mpc5125-ioctl";
+ reg = <0xA000 0x1000>;
+ };
+
+ usb@3000 {
+ compatible = "fsl,mpc5121-usb2-dr";
+ reg = <0x3000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <43 0x8>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
+
+ // 5125 PSCs are not 52xx or 5121 PSC compatible
+ // PSC1 uart0 aka ttyPSC0
+ serial@11100 {
+ compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
+ reg = <0x11100 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ // PSC9 uart1 aka ttyPSC1
+ serial@11900 {
+ compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
+ reg = <0x11900 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ pscfifo@11f00 {
+ compatible = "fsl,mpc5121-psc-fifo";
+ reg = <0x11f00 0x100>;
+ interrupts = <40 0x8>;
+ };
+
+ dma@14000 {
+ compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
+ reg = <0x14000 0x1800>;
+ interrupts = <65 0x8>;
+ };
+ };
+};
/ {
model = "pdm360ng";
- compatible = "ifm,pdm360ng";
+ compatible = "ifm,pdm360ng", "fsl,mpc5121";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&ipic>;
# CONFIG_PPC_CHRP is not set
CONFIG_PPC_MPC512x=y
CONFIG_MPC5121_ADS=y
-CONFIG_MPC5121_GENERIC=y
+CONFIG_MPC512x_GENERIC=y
CONFIG_PDM360NG=y
# CONFIG_PPC_PMAC is not set
CONFIG_NO_HZ=y
help
This option enables support for the MPC5121E ADS board.
-config MPC5121_GENERIC
- bool "Generic support for simple MPC5121 based boards"
+config MPC512x_GENERIC
+ bool "Generic support for simple MPC512x based boards"
depends on PPC_MPC512x
select DEFAULT_UIMAGE
help
- This option enables support for simple MPC5121 based boards
+ This option enables support for simple MPC512x based boards
which do not need custom platform specific setup.
Compatible boards include: Protonic LVT base boards (ZANMCU
- and VICVT2).
+ and VICVT2), Freescale MPC5125 Tower system.
config PDM360NG
bool "ifm PDM360NG board"
#
obj-y += clock.o mpc512x_shared.o
obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o
-obj-$(CONFIG_MPC5121_GENERIC) += mpc5121_generic.o
+obj-$(CONFIG_MPC512x_GENERIC) += mpc512x_generic.o
obj-$(CONFIG_PDM360NG) += pdm360ng.o
#include <asm/mpc5121.h>
#include <asm/clk_interface.h>
+#include "mpc512x.h"
+
#undef CLK_DEBUG
static int clocks_initialized;
struct device_node *np;
struct platform_device *ofdev;
u32 reg;
+ const char *psc_compat;
+
+ psc_compat = mpc512x_select_psc_compat();
+ if (!psc_compat)
+ return;
- for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+ for_each_compatible_node(np, NULL, psc_compat) {
if (!of_property_read_u32(np, "reg", ®)) {
int pscnum = (reg & 0xf00) >> 8;
struct clk *clk = psc_dev_clk(pscnum);
extern void __init mpc512x_init(void);
extern int __init mpc5121_clk_init(void);
void __init mpc512x_declare_of_platform_devices(void);
+extern const char *mpc512x_select_psc_compat(void);
extern void mpc512x_restart(char *cmd);
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
* Author: John Rigby, <jrigby@freescale.com>
*
* Description:
- * MPC5121 SoC setup
+ * MPC512x SoC setup
*
* This is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by
*/
static const char * const board[] __initconst = {
"prt,prtlvt",
+ "fsl,mpc5125ads",
+ "ifm,ac14xx",
NULL
};
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-static int __init mpc5121_generic_probe(void)
+static int __init mpc512x_generic_probe(void)
{
return of_flat_dt_match(of_get_flat_dt_root(), board);
}
-define_machine(mpc5121_generic) {
- .name = "MPC5121 generic",
- .probe = mpc5121_generic_probe,
+define_machine(mpc512x_generic) {
+ .name = "MPC512x generic",
+ .probe = mpc512x_generic_probe,
.init = mpc512x_init,
.init_early = mpc512x_init_diu,
.setup_arch = mpc512x_setup_diu,
static struct of_device_id __initdata of_bus_ids[] = {
{ .compatible = "fsl,mpc5121-immr", },
{ .compatible = "fsl,mpc5121-localbus", },
+ { .compatible = "fsl,mpc5121-mbx", },
+ { .compatible = "fsl,mpc5121-nfc", },
+ { .compatible = "fsl,mpc5121-sram", },
+ { .compatible = "fsl,mpc5121-pci", },
+ { .compatible = "gpio-leds", },
{},
};
void __init mpc512x_declare_of_platform_devices(void)
{
- struct device_node *np;
-
if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
printk(KERN_ERR __FILE__ ": "
"Error while probing of_platform bus\n");
-
- np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-nfc");
- if (np) {
- of_platform_device_create(np, NULL, NULL);
- of_node_put(np);
- }
}
#define DEFAULT_FIFO_SIZE 16
+const char *mpc512x_select_psc_compat(void)
+{
+ if (of_machine_is_compatible("fsl,mpc5121"))
+ return "fsl,mpc5121-psc";
+
+ if (of_machine_is_compatible("fsl,mpc5125"))
+ return "fsl,mpc5125-psc";
+
+ return NULL;
+}
+
static unsigned int __init get_fifo_size(struct device_node *np,
char *prop_name)
{
void __iomem *psc;
unsigned int tx_fifo_size;
unsigned int rx_fifo_size;
+ const char *psc_compat;
int fifobase = 0; /* current fifo address in 32 bit words */
- for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+ psc_compat = mpc512x_select_psc_compat();
+ if (!psc_compat) {
+ pr_err("%s: no compatible devices found\n", __func__);
+ return;
+ }
+
+ for_each_compatible_node(np, NULL, psc_compat) {
tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size");
rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size");
projects / ~andy / linux / commitdiff