/*
- w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
- Copyright (c) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- and Mark Studebaker <mdsxyz123@yahoo.com>
- Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org>
- Copyright (c) 2007 Jean Delvare <khali@linux-fr.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
+ * monitoring
+ * Copyright (c) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>,
+
* Philip Edelbrock <phil@netroedge.com>,
+ * and Mark Studebaker <mdsxyz123@yahoo.com>
+ * Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org>
+ * Copyright (c) 2007 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
/*
- Supports following chips:
-
- Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
- w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC)
- w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
- w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC)
- w83687thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
- w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
-
- For other winbond chips, and for i2c support in the above chips,
- use w83781d.c.
-
- Note: automatic ("cruise") fan control for 697, 637 & 627thf not
- supported yet.
-*/
+ * Supports following chips:
+ *
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC)
+ * w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
+ * w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC)
+ * w83687thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
+ * w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
+ *
+ * For other winbond chips, and for i2c support in the above chips,
+ * use w83781d.c.
+ *
+ * Note: automatic ("cruise") fan control for 697, 637 & 627thf not
+ * supported yet.
+ */
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
MODULE_PARM_DESC(force_id, "Override the detected device ID");
/* modified from kernel/include/traps.c */
-#define DEV 0x07 /* Register: Logical device select */
+#define DEV 0x07 /* Register: Logical device select */
/* logical device numbers for superio_select (below) */
#define W83627HF_LD_FDC 0x00
#define W83627HF_LD_ACPI 0x0a
#define W83627HF_LD_HWM 0x0b
-#define DEVID 0x20 /* Register: Device ID */
+#define DEVID 0x20 /* Register: Device ID */
#define W83627THF_GPIO5_EN 0x30 /* w83627thf only */
#define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */
static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
#define W83781D_DEFAULT_BETA 3435
-/* Conversions. Limit checking is only done on the TO_REG
- variants. Note that you should be a bit careful with which arguments
- these macros are called: arguments may be evaluated more than once.
- Fixing this is just not worth it. */
+/*
+ * Conversions. Limit checking is only done on the TO_REG
+ * variants. Note that you should be a bit careful with which arguments
+ * these macros are called: arguments may be evaluated more than once.
+ * Fixing this is just not worth it.
+ */
#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255))
#define IN_FROM_REG(val) ((val) * 16)
#define TEMP_MIN (-128000)
#define TEMP_MAX ( 127000)
-/* TEMP: 0.001C/bit (-128C to +127C)
- REG: 1C/bit, two's complement */
+/*
+ * TEMP: 0.001C/bit (-128C to +127C)
+ * REG: 1C/bit, two's complement
+ */
static u8 TEMP_TO_REG(long temp)
{
int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX);
static inline u8 pwm_freq_to_reg_627hf(unsigned long val)
{
u8 i;
- /* Only 5 dividers (1 2 4 8 16)
- Search for the nearest available frequency */
+ /*
+ * Only 5 dividers (1 2 4 8 16)
+ * Search for the nearest available frequency
+ */
for (i = 0; i < 4; i++) {
if (val > (((W83627HF_BASE_PWM_FREQ >> i) +
(W83627HF_BASE_PWM_FREQ >> (i+1))) / 2))
return (u8)i;
}
-/* For each registered chip, we need to keep some data in memory.
- The structure is dynamically allocated. */
+/*
+ * For each registered chip, we need to keep some data in memory.
+ * The structure is dynamically allocated.
+ */
struct w83627hf_data {
unsigned short addr;
const char *name;
u32 beep_mask; /* Register encoding, combined */
u8 pwm[3]; /* Register value */
u8 pwm_enable[3]; /* 1 = manual
- 2 = thermal cruise (also called SmartFan I)
- 3 = fan speed cruise */
+ * 2 = thermal cruise (also called SmartFan I)
+ * 3 = fan speed cruise
+ */
u8 pwm_freq[3]; /* Register value */
u16 sens[3]; /* 1 = pentium diode; 2 = 3904 diode;
- 4 = thermistor */
+ * 4 = thermistor
+ */
u8 vrm;
u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */
};
{
int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val);
{
int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val);
const char *buf, size_t count)
{
struct w83627hf_data *data = dev_get_drvdata(dev);
- u32 val;
+ unsigned long val;
+ int err;
- val = simple_strtoul(buf, NULL, 10);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
const char *buf, size_t count)
{
struct w83627hf_data *data = dev_get_drvdata(dev);
- u32 val;
+ unsigned long val;
+ int err;
- val = simple_strtoul(buf, NULL, 10);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
{
int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
- u32 val = simple_strtoul(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
{
int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
- long val = simple_strtol(buf, NULL, 10);
- u16 tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
+ u16 tmp;
+ long val;
+ int err;
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
mutex_lock(&data->update_lock);
data->temp_max[nr] = tmp;
w83627hf_write_value(data, w83627hf_reg_temp_over[nr], tmp);
{
int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
- long val = simple_strtol(buf, NULL, 10);
- u16 tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
+ u16 tmp;
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+ tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
mutex_lock(&data->update_lock);
data->temp_max_hyst[nr] = tmp;
w83627hf_write_value(data, w83627hf_reg_temp_hyst[nr], tmp);
store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct w83627hf_data *data = dev_get_drvdata(dev);
- u32 val;
+ unsigned long val;
+ int err;
- val = simple_strtoul(buf, NULL, 10);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
data->vrm = val;
return count;
{
struct w83627hf_data *data = dev_get_drvdata(dev);
unsigned long val;
+ int err;
- val = simple_strtoul(buf, NULL, 10);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
{
struct w83627hf_data *data = dev_get_drvdata(dev);
int bitnr = to_sensor_dev_attr(attr)->index;
- unsigned long bit;
u8 reg;
+ unsigned long bit;
+ int err;
+
+ err = kstrtoul(buf, 10, &bit);
+ if (err)
+ return err;
- bit = simple_strtoul(buf, NULL, 10);
if (bit & ~1)
return -EINVAL;
return sprintf(buf, "%ld\n",
(long) DIV_FROM_REG(data->fan_div[nr]));
}
-/* Note: we save and restore the fan minimum here, because its value is
- determined in part by the fan divisor. This follows the principle of
- least surprise; the user doesn't expect the fan minimum to change just
- because the divisor changed. */
+/*
+ * Note: we save and restore the fan minimum here, because its value is
+ * determined in part by the fan divisor. This follows the principle of
+ * least surprise; the user doesn't expect the fan minimum to change just
+ * because the divisor changed.
+ */
static ssize_t
store_fan_div(struct device *dev, struct device_attribute *devattr,
const char *buf, size_t count)
struct w83627hf_data *data = dev_get_drvdata(dev);
unsigned long min;
u8 reg;
- unsigned long val = simple_strtoul(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
{
int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
- u32 val = simple_strtoul(buf, NULL, 10);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
{
int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
- unsigned long val = simple_strtoul(buf, NULL, 10);
u8 reg;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
- if (!val || (val > 3)) /* modes 1, 2 and 3 are supported */
+ if (!val || val > 3) /* modes 1, 2 and 3 are supported */
return -EINVAL;
mutex_lock(&data->update_lock);
data->pwm_enable[nr] = val;
int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
static const u8 mask[]={0xF8, 0x8F};
- u32 val;
+ unsigned long val;
+ int err;
- val = simple_strtoul(buf, NULL, 10);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
{
int nr = to_sensor_dev_attr(devattr)->index;
struct w83627hf_data *data = dev_get_drvdata(dev);
- u32 val, tmp;
+ unsigned long val;
+ u32 tmp;
+ int err;
- val = simple_strtoul(buf, NULL, 10);
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
goto ERROR0;
}
- if (!(data = kzalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) {
+ data = kzalloc(sizeof(struct w83627hf_data), GFP_KERNEL);
+ if (!data) {
err = -ENOMEM;
goto ERROR1;
}
w83627hf_update_fan_div(data);
/* Register common device attributes */
- if ((err = sysfs_create_group(&dev->kobj, &w83627hf_group)))
+ err = sysfs_create_group(&dev->kobj, &w83627hf_group);
+ if (err)
goto ERROR3;
/* Register chip-specific device attributes */
}
if (data->type == w83627thf || data->type == w83637hf
- || data->type == w83687thf)
- if ((err = device_create_file(dev,
- &sensor_dev_attr_pwm3.dev_attr)))
+ || data->type == w83687thf) {
+ err = device_create_file(dev, &sensor_dev_attr_pwm3.dev_attr);
+ if (err)
goto ERROR4;
+ }
if (data->type == w83637hf || data->type == w83687thf)
if ((err = device_create_file(dev,
goto ERROR4;
if (data->type == w83627thf || data->type == w83637hf
- || data->type == w83687thf)
- if ((err = device_create_file(dev,
- &sensor_dev_attr_pwm3_enable.dev_attr)))
+ || data->type == w83687thf) {
+ err = device_create_file(dev,
+ &sensor_dev_attr_pwm3_enable.dev_attr);
+ if (err)
goto ERROR4;
+ }
data->hwmon_dev = hwmon_device_register(dev);
if (IS_ERR(data->hwmon_dev)) {
goto exit;
}
- /* Make sure the pins are configured for input
- There must be at least five (VRM 9), and possibly 6 (VRM 10) */
+ /*
+ * Make sure the pins are configured for input
+ * There must be at least five (VRM 9), and possibly 6 (VRM 10)
+ */
sel = superio_inb(sio_data, W83627THF_GPIO5_IOSR) & 0x3f;
if ((sel & 0x1f) != 0x1f) {
dev_dbg(&pdev->dev, "GPIO5 not configured for VID "
projects / ~andy / linux / commitdiff