}
}
+#ifdef CONFIG_IEEE80211_RADIOTAP
+static void ipw_handle_data_packet_monitor(struct ipw_priv *priv,
+ struct ipw_rx_mem_buffer *rxb,
+ struct ieee80211_rx_stats *stats)
+{
+ struct ipw_rx_packet *pkt = (struct ipw_rx_packet *)rxb->skb->data;
+ struct ipw_rx_frame *frame = &pkt->u.frame;
+
+ /* initial pull of some data */
+ u16 received_channel = frame->received_channel;
+ u8 antennaAndPhy = frame->antennaAndPhy;
+ s8 antsignal = frame->rssi_dbm - IPW_RSSI_TO_DBM; /* call it signed anyhow */
+ u16 pktrate = frame->rate;
+
+ /* Magic struct that slots into the radiotap header -- no reason
+ * to build this manually element by element, we can write it much
+ * more efficiently than we can parse it. ORDER MATTERS HERE */
+ struct ipw_rt_hdr {
+ struct ieee80211_radiotap_header rt_hdr;
+ u8 rt_flags; /* radiotap packet flags */
+ u8 rt_rate; /* rate in 500kb/s */
+ u16 rt_channel; /* channel in mhz */
+ u16 rt_chbitmask; /* channel bitfield */
+ s8 rt_dbmsignal; /* signal in dbM, kluged to signed */
+ u8 rt_antenna; /* antenna number */
+ } *ipw_rt;
+
+ short len = le16_to_cpu(pkt->u.frame.length);
+
+ /* We received data from the HW, so stop the watchdog */
+ priv->net_dev->trans_start = jiffies;
+
+ /* We only process data packets if the
+ * interface is open */
+ if (unlikely((le16_to_cpu(pkt->u.frame.length) + IPW_RX_FRAME_SIZE) >
+ skb_tailroom(rxb->skb))) {
+ priv->ieee->stats.rx_errors++;
+ priv->wstats.discard.misc++;
+ IPW_DEBUG_DROP("Corruption detected! Oh no!\n");
+ return;
+ } else if (unlikely(!netif_running(priv->net_dev))) {
+ priv->ieee->stats.rx_dropped++;
+ priv->wstats.discard.misc++;
+ IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
+ return;
+ }
+
+ /* Libpcap 0.9.3+ can handle variable length radiotap, so we'll use
+ * that now */
+ if (len > IPW_RX_BUF_SIZE - sizeof(struct ipw_rt_hdr)) {
+ /* FIXME: Should alloc bigger skb instead */
+ priv->ieee->stats.rx_dropped++;
+ priv->wstats.discard.misc++;
+ IPW_DEBUG_DROP("Dropping too large packet in monitor\n");
+ return;
+ }
+
+ /* copy the frame itself */
+ memmove(rxb->skb->data + sizeof(struct ipw_rt_hdr),
+ rxb->skb->data + IPW_RX_FRAME_SIZE, len);
+
+ /* Zero the radiotap static buffer ... We only need to zero the bytes NOT
+ * part of our real header, saves a little time.
+ *
+ * No longer necessary since we fill in all our data. Purge before merging
+ * patch officially.
+ * memset(rxb->skb->data + sizeof(struct ipw_rt_hdr), 0,
+ * IEEE80211_RADIOTAP_HDRLEN - sizeof(struct ipw_rt_hdr));
+ */
+
+ ipw_rt = (struct ipw_rt_hdr *)rxb->skb->data;
+
+ ipw_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
+ ipw_rt->rt_hdr.it_pad = 0; /* always good to zero */
+ ipw_rt->rt_hdr.it_len = sizeof(struct ipw_rt_hdr); /* total header+data */
+
+ /* Big bitfield of all the fields we provide in radiotap */
+ ipw_rt->rt_hdr.it_present =
+ ((1 << IEEE80211_RADIOTAP_FLAGS) |
+ (1 << IEEE80211_RADIOTAP_RATE) |
+ (1 << IEEE80211_RADIOTAP_CHANNEL) |
+ (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) |
+ (1 << IEEE80211_RADIOTAP_ANTENNA));
+
+ /* Zero the flags, we'll add to them as we go */
+ ipw_rt->rt_flags = 0;
+
+ /* Convert signal to DBM */
+ ipw_rt->rt_dbmsignal = antsignal;
+
+ /* Convert the channel data and set the flags */
+ ipw_rt->rt_channel = cpu_to_le16(ieee80211chan2mhz(received_channel));
+ if (received_channel > 14) { /* 802.11a */
+ ipw_rt->rt_chbitmask =
+ cpu_to_le16((IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ));
+ } else if (antennaAndPhy & 32) { /* 802.11b */
+ ipw_rt->rt_chbitmask =
+ cpu_to_le16((IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ));
+ } else { /* 802.11g */
+ ipw_rt->rt_chbitmask =
+ (IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ);
+ }
+
+ /* set the rate in multiples of 500k/s */
+ switch (pktrate) {
+ case IPW_TX_RATE_1MB:
+ ipw_rt->rt_rate = 2;
+ break;
+ case IPW_TX_RATE_2MB:
+ ipw_rt->rt_rate = 4;
+ break;
+ case IPW_TX_RATE_5MB:
+ ipw_rt->rt_rate = 10;
+ break;
+ case IPW_TX_RATE_6MB:
+ ipw_rt->rt_rate = 12;
+ break;
+ case IPW_TX_RATE_9MB:
+ ipw_rt->rt_rate = 18;
+ break;
+ case IPW_TX_RATE_11MB:
+ ipw_rt->rt_rate = 22;
+ break;
+ case IPW_TX_RATE_12MB:
+ ipw_rt->rt_rate = 24;
+ break;
+ case IPW_TX_RATE_18MB:
+ ipw_rt->rt_rate = 36;
+ break;
+ case IPW_TX_RATE_24MB:
+ ipw_rt->rt_rate = 48;
+ break;
+ case IPW_TX_RATE_36MB:
+ ipw_rt->rt_rate = 72;
+ break;
+ case IPW_TX_RATE_48MB:
+ ipw_rt->rt_rate = 96;
+ break;
+ case IPW_TX_RATE_54MB:
+ ipw_rt->rt_rate = 108;
+ break;
+ default:
+ ipw_rt->rt_rate = 0;
+ break;
+ }
+
+ /* antenna number */
+ ipw_rt->rt_antenna = (antennaAndPhy & 3); /* Is this right? */
+
+ /* set the preamble flag if we have it */
+ if ((antennaAndPhy & 64))
+ ipw_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
+
+ /* Set the size of the skb to the size of the frame */
+ skb_put(rxb->skb, len + sizeof(struct ipw_rt_hdr));
+
+ IPW_DEBUG_RX("Rx packet of %d bytes.\n", rxb->skb->len);
+
+ if (!ieee80211_rx(priv->ieee, rxb->skb, stats))
+ priv->ieee->stats.rx_errors++;
+ else { /* ieee80211_rx succeeded, so it now owns the SKB */
+ rxb->skb = NULL;
+ /* no LED during capture */
+ }
+}
+#endif
+
static inline int is_network_packet(struct ipw_priv *priv,
struct ieee80211_hdr_4addr *header)
{
#ifdef CONFIG_IPW2200_MONITOR
if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
+#ifdef CONFIG_IEEE80211_RADIOTAP
+ ipw_handle_data_packet_monitor(priv,
+ rxb,
+ &stats);
+#else
ipw_handle_data_packet(priv, rxb,
&stats);
+#endif
break;
}
#endif
#ifdef CONFIG_IPW2200_MONITOR
case 2:
priv->ieee->iw_mode = IW_MODE_MONITOR;
+#ifdef CONFIG_IEEE80211_RADIOTAP
+ priv->net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
+#else
priv->net_dev->type = ARPHRD_IEEE80211;
+#endif
break;
#endif
default:
priv->net_dev->type = ARPHRD_ETHER;
if (wrqu->mode == IW_MODE_MONITOR)
+#ifdef CONFIG_IEEE80211_RADIOTAP
+ priv->net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
+#else
priv->net_dev->type = ARPHRD_IEEE80211;
+#endif
#endif /* CONFIG_IPW2200_MONITOR */
/* Free the existing firmware and reset the fw_loaded
IPW_DEBUG_WX("SET MONITOR: %d %d\n", enable, parms[1]);
if (enable) {
if (priv->ieee->iw_mode != IW_MODE_MONITOR) {
+#ifdef CONFIG_IEEE80211_RADIOTAP
+ priv->net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
+#else
priv->net_dev->type = ARPHRD_IEEE80211;
+#endif
queue_work(priv->workqueue, &priv->adapter_restart);
}
projects / ~andy / linux / commitdiff