D: Cobalt Networks (x86) support
D: This-and-That
+N: Mark M. Hoffman
+E: mhoffman@lightlink.com
+D: asb100, lm93 and smsc47b397 hardware monitoring drivers
+D: hwmon subsystem core
+D: hwmon subsystem maintainer
+D: i2c-sis96x and i2c-stub SMBus drivers
+S: USA
+
N: Dirk Hohndel
E: hohndel@suse.de
D: The XFree86[tm] Project
--- /dev/null
+Frequently asked questions about the sunxi clock system
+=======================================================
+
+This document contains useful bits of information that people tend to ask
+about the sunxi clock system, as well as accompanying ASCII art when adequate.
+
+Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
+ system?
+
+A: The 24MHz oscillator allows gating to save power. Indeed, if gated
+ carelessly the system would stop functioning, but with the right
+ steps, one can gate it and keep the system running. Consider this
+ simplified suspend example:
+
+ While the system is operational, you would see something like
+
+ 24MHz 32kHz
+ |
+ PLL1
+ \
+ \_ CPU Mux
+ |
+ [CPU]
+
+ When you are about to suspend, you switch the CPU Mux to the 32kHz
+ oscillator:
+
+ 24Mhz 32kHz
+ | |
+ PLL1 |
+ /
+ CPU Mux _/
+ |
+ [CPU]
+
+ Finally you can gate the main oscillator
+
+ 32kHz
+ |
+ |
+ /
+ CPU Mux _/
+ |
+ [CPU]
+
+Q: Were can I learn more about the sunxi clocks?
+
+A: The linux-sunxi wiki contains a page documenting the clock registers,
+ you can find it at
+
+ http://linux-sunxi.org/A10/CCM
+
+ The authoritative source for information at this time is the ccmu driver
+ released by Allwinner, you can find it at
+
+ https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu
};
Below is a matrix detailing which clk_ops are mandatory based upon the
-hardware capbilities of that clock. A cell marked as "y" means
+hardware capabilities of that clock. A cell marked as "y" means
mandatory, a cell marked as "n" implies that either including that
-callback is invalid or otherwise uneccesary. Empty cells are either
+callback is invalid or otherwise unnecessary. Empty cells are either
optional or must be evaluated on a case-by-case basis.
clock hardware characteristics
NVIDIA Tegra Power Management Controller (PMC)
-Properties:
+The PMC block interacts with an external Power Management Unit. The PMC
+mostly controls the entry and exit of the system from different sleep
+modes. It provides power-gating controllers for SoC and CPU power-islands.
+
+Required properties:
- name : Should be pmc
- compatible : Should contain "nvidia,tegra<chip>-pmc".
- reg : Offset and length of the register set for the device
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "pclk" (The Tegra clock of that name),
+ "clk32k_in" (The 32KHz clock input to Tegra).
+
+Optional properties:
- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
The PMU is an external Power Management Unit, whose interrupt output
signal is fed into the PMC. This signal is optionally inverted, and then
fed into the ARM GIC. The PMC is not involved in the detection or
handling of this interrupt signal, merely its inversion.
+- nvidia,suspend-mode : The suspend mode that the platform should use.
+ Valid values are 0, 1 and 2:
+ 0 (LP0): CPU + Core voltage off and DRAM in self-refresh
+ 1 (LP1): CPU voltage off and DRAM in self-refresh
+ 2 (LP2): CPU voltage off
+- nvidia,core-power-req-active-high : Boolean, core power request active-high
+- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
+- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
+- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
+ is enabled.
+
+Required properties when nvidia,suspend-mode is specified:
+- nvidia,cpu-pwr-good-time : CPU power good time in uS.
+- nvidia,cpu-pwr-off-time : CPU power off time in uS.
+- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
+ Core power good time in uS.
+- nvidia,core-pwr-off-time : Core power off time in uS.
+
+Required properties when nvidia,suspend-mode=<0>:
+- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
+ The LP0 vector contains the warm boot code that is executed by AVP when
+ resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
+ processor and always being the first boot processor when chip is power on
+ or resume from deep sleep mode. When the system is resumed from the deep
+ sleep mode, the warm boot code will restore some PLLs, clocks and then
+ bring up CPU0 for resuming the system.
Example:
+/ SoC dts including file
pmc@7000f400 {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
+ clocks = <&tegra_car 110>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <2000>;
+ nvidia,cpu-pwr-off-time = <100>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <458>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ nvidia,lp0-vec = <0xbdffd000 0x2000>;
+};
+
+/ Tegra board dts file
+{
+ ...
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+ ...
};
Timing properties for child nodes. All are optional and default to 0.
- - gpmc,sync-clk: Minimum clock period for synchronous mode, in picoseconds
-
- Chip-select signal timings corresponding to GPMC_CONFIG2:
- - gpmc,cs-on: Assertion time
- - gpmc,cs-rd-off: Read deassertion time
- - gpmc,cs-wr-off: Write deassertion time
-
- ADV signal timings corresponding to GPMC_CONFIG3:
- - gpmc,adv-on: Assertion time
- - gpmc,adv-rd-off: Read deassertion time
- - gpmc,adv-wr-off: Write deassertion time
-
- WE signals timings corresponding to GPMC_CONFIG4:
- - gpmc,we-on: Assertion time
- - gpmc,we-off: Deassertion time
-
- OE signals timings corresponding to GPMC_CONFIG4:
- - gpmc,oe-on: Assertion time
- - gpmc,oe-off: Deassertion time
-
- Access time and cycle time timings corresponding to GPMC_CONFIG5:
- - gpmc,page-burst-access: Multiple access word delay
- - gpmc,access: Start-cycle to first data valid delay
- - gpmc,rd-cycle: Total read cycle time
- - gpmc,wr-cycle: Total write cycle time
+ - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds
+
+ Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2:
+ - gpmc,cs-on-ns: Assertion time
+ - gpmc,cs-rd-off-ns: Read deassertion time
+ - gpmc,cs-wr-off-ns: Write deassertion time
+
+ ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3:
+ - gpmc,adv-on-ns: Assertion time
+ - gpmc,adv-rd-off-ns: Read deassertion time
+ - gpmc,adv-wr-off-ns: Write deassertion time
+
+ WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
+ - gpmc,we-on-ns Assertion time
+ - gpmc,we-off-ns: Deassertion time
+
+ OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
+ - gpmc,oe-on-ns: Assertion time
+ - gpmc,oe-off-ns: Deassertion time
+
+ Access time and cycle time timings (in nanoseconds) corresponding to
+ GPMC_CONFIG5:
+ - gpmc,page-burst-access-ns: Multiple access word delay
+ - gpmc,access-ns: Start-cycle to first data valid delay
+ - gpmc,rd-cycle-ns: Total read cycle time
+ - gpmc,wr-cycle-ns: Total write cycle time
+ - gpmc,bus-turnaround-ns: Turn-around time between successive accesses
+ - gpmc,cycle2cycle-delay-ns: Delay between chip-select pulses
+ - gpmc,clk-activation-ns: GPMC clock activation time
+ - gpmc,wait-monitoring-ns: Start of wait monitoring with regard to valid
+ data
+
+Boolean timing parameters. If property is present parameter enabled and
+disabled if omitted:
+ - gpmc,adv-extra-delay: ADV signal is delayed by half GPMC clock
+ - gpmc,cs-extra-delay: CS signal is delayed by half GPMC clock
+ - gpmc,cycle2cycle-diffcsen: Add "cycle2cycle-delay" between successive
+ accesses to a different CS
+ - gpmc,cycle2cycle-samecsen: Add "cycle2cycle-delay" between successive
+ accesses to the same CS
+ - gpmc,oe-extra-delay: OE signal is delayed by half GPMC clock
+ - gpmc,we-extra-delay: WE signal is delayed by half GPMC clock
+ - gpmc,time-para-granularity: Multiply all access times by 2
The following are only applicable to OMAP3+ and AM335x:
- - gpmc,wr-access
- - gpmc,wr-data-mux-bus
-
+ - gpmc,wr-access-ns: In synchronous write mode, for single or
+ burst accesses, defines the number of
+ GPMC_FCLK cycles from start access time
+ to the GPMC_CLK rising edge used by the
+ memory device for the first data capture.
+ - gpmc,wr-data-mux-bus-ns: In address-data multiplex mode, specifies
+ the time when the first data is driven on
+ the address-data bus.
+
+GPMC chip-select settings properties for child nodes. All are optional.
+
+- gpmc,burst-length Page/burst length. Must be 4, 8 or 16.
+- gpmc,burst-wrap Enables wrap bursting
+- gpmc,burst-read Enables read page/burst mode
+- gpmc,burst-write Enables write page/burst mode
+- gpmc,device-nand Device is NAND
+- gpmc,device-width Total width of device(s) connected to a GPMC
+ chip-select in bytes. The GPMC supports 8-bit
+ and 16-bit devices and so this property must be
+ 1 or 2.
+- gpmc,mux-add-data Address and data multiplexing configuration.
+ Valid values are 1 for address-address-data
+ multiplexing mode and 2 for address-data
+ multiplexing mode.
+- gpmc,sync-read Enables synchronous read. Defaults to asynchronous
+ is this is not set.
+- gpmc,sync-write Enables synchronous writes. Defaults to asynchronous
+ is this is not set.
+- gpmc,wait-pin Wait-pin used by client. Must be less than
+ "gpmc,num-waitpins".
+- gpmc,wait-on-read Enables wait monitoring on reads.
+- gpmc,wait-on-write Enables wait monitoring on writes.
Example for an AM33xx board:
--- /dev/null
+Binding for the axi-clkgen clock generator
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "adi,axi-clkgen".
+- #clock-cells : from common clock binding; Should always be set to 0.
+- reg : Address and length of the axi-clkgen register set.
+- clocks : Phandle and clock specifier for the parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+ clock@0xff000000 {
+ compatible = "adi,axi-clkgen";
+ #clock-cells = <0>;
+ reg = <0xff000000 0x1000>;
+ clocks = <&osc 1>;
+ };
--- /dev/null
+* Samsung Exynos4 Clock Controller
+
+The Exynos4 clock controller generates and supplies clock to various controllers
+within the Exynos4 SoC. The clock binding described here is applicable to all
+SoC's in the Exynos4 family.
+
+Required Properties:
+
+- comptible: should be one of the following.
+ - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
+ - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume. Some of the clocks are available only on a particular
+Exynos4 SoC and this is specified where applicable.
+
+
+ [Core Clocks]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ xxti 1
+ xusbxti 2
+ fin_pll 3
+ fout_apll 4
+ fout_mpll 5
+ fout_epll 6
+ fout_vpll 7
+ sclk_apll 8
+ sclk_mpll 9
+ sclk_epll 10
+ sclk_vpll 11
+ arm_clk 12
+ aclk200 13
+ aclk100 14
+ aclk160 15
+ aclk133 16
+ mout_mpll_user_t 17 Exynos4x12
+ mout_mpll_user_c 18 Exynos4x12
+ mout_core 19
+ mout_apll 20
+
+
+ [Clock Gate for Special Clocks]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ sclk_fimc0 128
+ sclk_fimc1 129
+ sclk_fimc2 130
+ sclk_fimc3 131
+ sclk_cam0 132
+ sclk_cam1 133
+ sclk_csis0 134
+ sclk_csis1 135
+ sclk_hdmi 136
+ sclk_mixer 137
+ sclk_dac 138
+ sclk_pixel 139
+ sclk_fimd0 140
+ sclk_mdnie0 141 Exynos4412
+ sclk_mdnie_pwm0 12 142 Exynos4412
+ sclk_mipi0 143
+ sclk_audio0 144
+ sclk_mmc0 145
+ sclk_mmc1 146
+ sclk_mmc2 147
+ sclk_mmc3 148
+ sclk_mmc4 149
+ sclk_sata 150 Exynos4210
+ sclk_uart0 151
+ sclk_uart1 152
+ sclk_uart2 153
+ sclk_uart3 154
+ sclk_uart4 155
+ sclk_audio1 156
+ sclk_audio2 157
+ sclk_spdif 158
+ sclk_spi0 159
+ sclk_spi1 160
+ sclk_spi2 161
+ sclk_slimbus 162
+ sclk_fimd1 163 Exynos4210
+ sclk_mipi1 164 Exynos4210
+ sclk_pcm1 165
+ sclk_pcm2 166
+ sclk_i2s1 167
+ sclk_i2s2 168
+ sclk_mipihsi 169 Exynos4412
+ sclk_mfc 170
+ sclk_pcm0 171
+ sclk_g3d 172
+ sclk_pwm_isp 173 Exynos4x12
+ sclk_spi0_isp 174 Exynos4x12
+ sclk_spi1_isp 175 Exynos4x12
+ sclk_uart_isp 176 Exynos4x12
+
+ [Peripheral Clock Gates]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ fimc0 256
+ fimc1 257
+ fimc2 258
+ fimc3 259
+ csis0 260
+ csis1 261
+ jpeg 262
+ smmu_fimc0 263
+ smmu_fimc1 264
+ smmu_fimc2 265
+ smmu_fimc3 266
+ smmu_jpeg 267
+ vp 268
+ mixer 269
+ tvenc 270 Exynos4210
+ hdmi 271
+ smmu_tv 272
+ mfc 273
+ smmu_mfcl 274
+ smmu_mfcr 275
+ g3d 276
+ g2d 277 Exynos4210
+ rotator 278 Exynos4210
+ mdma 279 Exynos4210
+ smmu_g2d 280 Exynos4210
+ smmu_rotator 281 Exynos4210
+ smmu_mdma 282 Exynos4210
+ fimd0 283
+ mie0 284
+ mdnie0 285 Exynos4412
+ dsim0 286
+ smmu_fimd0 287
+ fimd1 288 Exynos4210
+ mie1 289 Exynos4210
+ dsim1 290 Exynos4210
+ smmu_fimd1 291 Exynos4210
+ pdma0 292
+ pdma1 293
+ pcie_phy 294
+ sata_phy 295 Exynos4210
+ tsi 296
+ sdmmc0 297
+ sdmmc1 298
+ sdmmc2 299
+ sdmmc3 300
+ sdmmc4 301
+ sata 302 Exynos4210
+ sromc 303
+ usb_host 304
+ usb_device 305
+ pcie 306
+ onenand 307
+ nfcon 308
+ smmu_pcie 309
+ gps 310
+ smmu_gps 311
+ uart0 312
+ uart1 313
+ uart2 314
+ uart3 315
+ uart4 316
+ i2c0 317
+ i2c1 318
+ i2c2 319
+ i2c3 320
+ i2c4 321
+ i2c5 322
+ i2c6 323
+ i2c7 324
+ i2c_hdmi 325
+ tsadc 326
+ spi0 327
+ spi1 328
+ spi2 329
+ i2s1 330
+ i2s2 331
+ pcm0 332
+ i2s0 333
+ pcm1 334
+ pcm2 335
+ pwm 336
+ slimbus 337
+ spdif 338
+ ac97 339
+ modemif 340
+ chipid 341
+ sysreg 342
+ hdmi_cec 343
+ mct 344
+ wdt 345
+ rtc 346
+ keyif 347
+ audss 348
+ mipi_hsi 349 Exynos4210
+ mdma2 350 Exynos4210
+ pixelasyncm0 351
+ pixelasyncm1 352
+ fimc_lite0 353 Exynos4x12
+ fimc_lite1 354 Exynos4x12
+ ppmuispx 355 Exynos4x12
+ ppmuispmx 356 Exynos4x12
+ fimc_isp 357 Exynos4x12
+ fimc_drc 358 Exynos4x12
+ fimc_fd 359 Exynos4x12
+ mcuisp 360 Exynos4x12
+ gicisp 361 Exynos4x12
+ smmu_isp 362 Exynos4x12
+ smmu_drc 363 Exynos4x12
+ smmu_fd 364 Exynos4x12
+ smmu_lite0 365 Exynos4x12
+ smmu_lite1 366 Exynos4x12
+ mcuctl_isp 367 Exynos4x12
+ mpwm_isp 368 Exynos4x12
+ i2c0_isp 369 Exynos4x12
+ i2c1_isp 370 Exynos4x12
+ mtcadc_isp 371 Exynos4x12
+ pwm_isp 372 Exynos4x12
+ wdt_isp 373 Exynos4x12
+ uart_isp 374 Exynos4x12
+ asyncaxim 375 Exynos4x12
+ smmu_ispcx 376 Exynos4x12
+ spi0_isp 377 Exynos4x12
+ spi1_isp 378 Exynos4x12
+ pwm_isp_sclk 379 Exynos4x12
+ spi0_isp_sclk 380 Exynos4x12
+ spi1_isp_sclk 381 Exynos4x12
+ uart_isp_sclk 382 Exynos4x12
+
+ [Mux Clocks]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ mout_fimc0 384
+ mout_fimc1 385
+ mout_fimc2 386
+ mout_fimc3 387
+ mout_cam0 388
+ mout_cam1 389
+ mout_csis0 390
+ mout_csis1 391
+ mout_g3d0 392
+ mout_g3d1 393
+ mout_g3d 394
+ aclk400_mcuisp 395 Exynos4x12
+
+ [Div Clocks]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ div_isp0 450 Exynos4x12
+ div_isp1 451 Exynos4x12
+ div_mcuisp0 452 Exynos4x12
+ div_mcuisp1 453 Exynos4x12
+ div_aclk200 454 Exynos4x12
+ div_aclk400_mcuisp 455 Exynos4x12
+
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock: clock-controller@0x10030000 {
+ compatible = "samsung,exynos4210-clock";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 54 0>;
+ clocks = <&clock 314>, <&clock 153>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
--- /dev/null
+* Samsung Exynos5250 Clock Controller
+
+The Exynos5250 clock controller generates and supplies clock to various
+controllers within the Exynos5250 SoC.
+
+Required Properties:
+
+- comptible: should be one of the following.
+ - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+ [Core Clocks]
+
+ Clock ID
+ ----------------------------
+
+ fin_pll 1
+
+ [Clock Gate for Special Clocks]
+
+ Clock ID
+ ----------------------------
+
+ sclk_cam_bayer 128
+ sclk_cam0 129
+ sclk_cam1 130
+ sclk_gscl_wa 131
+ sclk_gscl_wb 132
+ sclk_fimd1 133
+ sclk_mipi1 134
+ sclk_dp 135
+ sclk_hdmi 136
+ sclk_pixel 137
+ sclk_audio0 138
+ sclk_mmc0 139
+ sclk_mmc1 140
+ sclk_mmc2 141
+ sclk_mmc3 142
+ sclk_sata 143
+ sclk_usb3 144
+ sclk_jpeg 145
+ sclk_uart0 146
+ sclk_uart1 147
+ sclk_uart2 148
+ sclk_uart3 149
+ sclk_pwm 150
+ sclk_audio1 151
+ sclk_audio2 152
+ sclk_spdif 153
+ sclk_spi0 154
+ sclk_spi1 155
+ sclk_spi2 156
+
+
+ [Peripheral Clock Gates]
+
+ Clock ID
+ ----------------------------
+
+ gscl0 256
+ gscl1 257
+ gscl2 258
+ gscl3 259
+ gscl_wa 260
+ gscl_wb 261
+ smmu_gscl0 262
+ smmu_gscl1 263
+ smmu_gscl2 264
+ smmu_gscl3 265
+ mfc 266
+ smmu_mfcl 267
+ smmu_mfcr 268
+ rotator 269
+ jpeg 270
+ mdma1 271
+ smmu_rotator 272
+ smmu_jpeg 273
+ smmu_mdma1 274
+ pdma0 275
+ pdma1 276
+ sata 277
+ usbotg 278
+ mipi_hsi 279
+ sdmmc0 280
+ sdmmc1 281
+ sdmmc2 282
+ sdmmc3 283
+ sromc 284
+ usb2 285
+ usb3 286
+ sata_phyctrl 287
+ sata_phyi2c 288
+ uart0 289
+ uart1 290
+ uart2 291
+ uart3 292
+ uart4 293
+ i2c0 294
+ i2c1 295
+ i2c2 296
+ i2c3 297
+ i2c4 298
+ i2c5 299
+ i2c6 300
+ i2c7 301
+ i2c_hdmi 302
+ adc 303
+ spi0 304
+ spi1 305
+ spi2 306
+ i2s1 307
+ i2s2 308
+ pcm1 309
+ pcm2 310
+ pwm 311
+ spdif 312
+ ac97 313
+ hsi2c0 314
+ hsi2c1 315
+ hs12c2 316
+ hs12c3 317
+ chipid 318
+ sysreg 319
+ pmu 320
+ cmu_top 321
+ cmu_core 322
+ cmu_mem 323
+ tzpc0 324
+ tzpc1 325
+ tzpc2 326
+ tzpc3 327
+ tzpc4 328
+ tzpc5 329
+ tzpc6 330
+ tzpc7 331
+ tzpc8 332
+ tzpc9 333
+ hdmi_cec 334
+ mct 335
+ wdt 336
+ rtc 337
+ tmu 338
+ fimd1 339
+ mie1 340
+ dsim0 341
+ dp 342
+ mixer 343
+ hdmi 345
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock: clock-controller@0x10010000 {
+ compatible = "samsung,exynos5250-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 54 0>;
+ clocks = <&clock 314>, <&clock 153>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
--- /dev/null
+* Samsung Exynos5440 Clock Controller
+
+The Exynos5440 clock controller generates and supplies clock to various
+controllers within the Exynos5440 SoC.
+
+Required Properties:
+
+- comptible: should be "samsung,exynos5440-clock".
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+ [Core Clocks]
+
+ Clock ID
+ ----------------------------
+
+ xtal 1
+ arm_clk 2
+
+ [Peripheral Clock Gates]
+
+ Clock ID
+ ----------------------------
+
+ spi_baud 16
+ pb0_250 17
+ pr0_250 18
+ pr1_250 19
+ b_250 20
+ b_125 21
+ b_200 22
+ sata 23
+ usb 24
+ gmac0 25
+ cs250 26
+ pb0_250_o 27
+ pr0_250_o 28
+ pr1_250_o 29
+ b_250_o 30
+ b_125_o 31
+ b_200_o 32
+ sata_o 33
+ usb_o 34
+ gmac0_o 35
+ cs250_o 36
+
+Example: An example of a clock controller node is listed below.
+
+ clock: clock-controller@0x10010000 {
+ compatible = "samsung,exynos5440-clock";
+ reg = <0x160000 0x10000>;
+ #clock-cells = <1>;
+ };
--- /dev/null
+NVIDIA Tegra114 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra114-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the CAR.
+
+ The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ this case, those clocks are assigned IDs above 160 in order to highlight
+ this issue. Implementations that interpret these clock IDs as bit values
+ within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ explicitly handle these special cases.
+
+ The balance of the clocks controlled by the CAR are assigned IDs of 160 and
+ above.
+
+ 0 unassigned
+ 1 unassigned
+ 2 unassigned
+ 3 unassigned
+ 4 rtc
+ 5 timer
+ 6 uarta
+ 7 unassigned (register bit affects uartb and vfir)
+ 8 unassigned
+ 9 sdmmc2
+ 10 unassigned (register bit affects spdif_in and spdif_out)
+ 11 i2s1
+ 12 i2c1
+ 13 ndflash
+ 14 sdmmc1
+ 15 sdmmc4
+ 16 unassigned
+ 17 pwm
+ 18 i2s2
+ 19 epp
+ 20 unassigned (register bit affects vi and vi_sensor)
+ 21 2d
+ 22 usbd
+ 23 isp
+ 24 3d
+ 25 unassigned
+ 26 disp2
+ 27 disp1
+ 28 host1x
+ 29 vcp
+ 30 i2s0
+ 31 unassigned
+
+ 32 unassigned
+ 33 unassigned
+ 34 apbdma
+ 35 unassigned
+ 36 kbc
+ 37 unassigned
+ 38 unassigned
+ 39 unassigned (register bit affects fuse and fuse_burn)
+ 40 kfuse
+ 41 sbc1
+ 42 nor
+ 43 unassigned
+ 44 sbc2
+ 45 unassigned
+ 46 sbc3
+ 47 i2c5
+ 48 dsia
+ 49 unassigned
+ 50 mipi
+ 51 hdmi
+ 52 csi
+ 53 unassigned
+ 54 i2c2
+ 55 uartc
+ 56 mipi-cal
+ 57 emc
+ 58 usb2
+ 59 usb3
+ 60 msenc
+ 61 vde
+ 62 bsea
+ 63 bsev
+
+ 64 unassigned
+ 65 uartd
+ 66 unassigned
+ 67 i2c3
+ 68 sbc4
+ 69 sdmmc3
+ 70 unassigned
+ 71 owr
+ 72 afi
+ 73 csite
+ 74 unassigned
+ 75 unassigned
+ 76 la
+ 77 trace
+ 78 soc_therm
+ 79 dtv
+ 80 ndspeed
+ 81 i2cslow
+ 82 dsib
+ 83 tsec
+ 84 unassigned
+ 85 unassigned
+ 86 unassigned
+ 87 unassigned
+ 88 unassigned
+ 89 xusb_host
+ 90 unassigned
+ 91 msenc
+ 92 csus
+ 93 unassigned
+ 94 unassigned
+ 95 unassigned (bit affects xusb_dev and xusb_dev_src)
+
+ 96 unassigned
+ 97 unassigned
+ 98 unassigned
+ 99 mselect
+ 100 tsensor
+ 101 i2s3
+ 102 i2s4
+ 103 i2c4
+ 104 sbc5
+ 105 sbc6
+ 106 d_audio
+ 107 apbif
+ 108 dam0
+ 109 dam1
+ 110 dam2
+ 111 hda2codec_2x
+ 112 unassigned
+ 113 audio0_2x
+ 114 audio1_2x
+ 115 audio2_2x
+ 116 audio3_2x
+ 117 audio4_2x
+ 118 spdif_2x
+ 119 actmon
+ 120 extern1
+ 121 extern2
+ 122 extern3
+ 123 unassigned
+ 124 unassigned
+ 125 hda
+ 126 unassigned
+ 127 se
+
+ 128 hda2hdmi
+ 129 unassigned
+ 130 unassigned
+ 131 unassigned
+ 132 unassigned
+ 133 unassigned
+ 134 unassigned
+ 135 unassigned
+ 136 unassigned
+ 137 unassigned
+ 138 unassigned
+ 139 unassigned
+ 140 unassigned
+ 141 unassigned
+ 142 unassigned
+ 143 unassigned (bit affects xusb_falcon_src, xusb_fs_src,
+ xusb_host_src and xusb_ss_src)
+ 144 cilab
+ 145 cilcd
+ 146 cile
+ 147 dsialp
+ 148 dsiblp
+ 149 unassigned
+ 150 dds
+ 151 unassigned
+ 152 dp2
+ 153 amx
+ 154 adx
+ 155 unassigned (bit affects dfll_ref and dfll_soc)
+ 156 xusb_ss
+
+ 192 uartb
+ 193 vfir
+ 194 spdif_in
+ 195 spdif_out
+ 196 vi
+ 197 vi_sensor
+ 198 fuse
+ 199 fuse_burn
+ 200 clk_32k
+ 201 clk_m
+ 202 clk_m_div2
+ 203 clk_m_div4
+ 204 pll_ref
+ 205 pll_c
+ 206 pll_c_out1
+ 207 pll_c2
+ 208 pll_c3
+ 209 pll_m
+ 210 pll_m_out1
+ 211 pll_p
+ 212 pll_p_out1
+ 213 pll_p_out2
+ 214 pll_p_out3
+ 215 pll_p_out4
+ 216 pll_a
+ 217 pll_a_out0
+ 218 pll_d
+ 219 pll_d_out0
+ 220 pll_d2
+ 221 pll_d2_out0
+ 222 pll_u
+ 223 pll_u_480M
+ 224 pll_u_60M
+ 225 pll_u_48M
+ 226 pll_u_12M
+ 227 pll_x
+ 228 pll_x_out0
+ 229 pll_re_vco
+ 230 pll_re_out
+ 231 pll_e_out0
+ 232 spdif_in_sync
+ 233 i2s0_sync
+ 234 i2s1_sync
+ 235 i2s2_sync
+ 236 i2s3_sync
+ 237 i2s4_sync
+ 238 vimclk_sync
+ 239 audio0
+ 240 audio1
+ 241 audio2
+ 242 audio3
+ 243 audio4
+ 244 spdif
+ 245 clk_out_1
+ 246 clk_out_2
+ 247 clk_out_3
+ 248 blink
+ 252 xusb_host_src
+ 253 xusb_falcon_src
+ 254 xusb_fs_src
+ 255 xusb_ss_src
+ 256 xusb_dev_src
+ 257 xusb_dev
+ 258 xusb_hs_src
+ 259 sclk
+ 260 hclk
+ 261 pclk
+ 262 cclk_g
+ 263 cclk_lp
+ 264 dfll_ref
+ 265 dfll_soc
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock {
+ compatible = "nvidia,tegra114-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car 58>; /* usb2 */
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k> <&osc>;
+ };
+};
90 clk_d
91 unassigned
92 sus
- 93 cdev1
- 94 cdev2
+ 93 cdev2
+ 94 cdev1
95 unassigned
96 uart2
--- /dev/null
+Device Tree Clock bindings for arch-sunxi
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "allwinner,sun4i-osc-clk" - for a gatable oscillator
+ "allwinner,sun4i-pll1-clk" - for the main PLL clock
+ "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
+ "allwinner,sun4i-axi-clk" - for the AXI clock
+ "allwinner,sun4i-ahb-clk" - for the AHB clock
+ "allwinner,sun4i-apb0-clk" - for the APB0 clock
+ "allwinner,sun4i-apb1-clk" - for the APB1 clock
+ "allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
+
+Required properties for all clocks:
+- reg : shall be the control register address for the clock.
+- clocks : shall be the input parent clock(s) phandle for the clock
+- #clock-cells : from common clock binding; shall be set to 0.
+
+For example:
+
+osc24M: osc24M@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-osc-clk";
+ reg = <0x01c20050 0x4>;
+ clocks = <&osc24M_fixed>;
+};
+
+pll1: pll1@01c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+};
+
+cpu: cpu@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-cpu-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>;
+};
+++ /dev/null
-VIA/Wondermedia VT8500 GPIO Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "via,vt8500-gpio", "wm,wm8505-gpio"
- or "wm,wm8650-gpio" depending on your SoC
-- reg : Should contain 1 register range (address and length)
-- #gpio-cells : should be <3>.
- 1) bank
- 2) pin number
- 3) flags - should be 0
-
-Example:
-
- gpio: gpio-controller@d8110000 {
- compatible = "via,vt8500-gpio";
- gpio-controller;
- reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
- };
-
- vibrate {
- gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */
- };
--- /dev/null
+Samsung S3C24XX Interrupt Controllers
+
+The S3C24XX SoCs contain a custom set of interrupt controllers providing a
+varying number of interrupt sources. The set consists of a main- and sub-
+controller and on newer SoCs even a second main controller.
+
+Required properties:
+- compatible: Compatible property value should be "samsung,s3c2410-irq"
+ for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later.
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 4 and interrupt descriptor shall
+ have the following format:
+ <ctrl_num parent_irq ctrl_irq type>
+
+ ctrl_num contains the controller to use:
+ - 0 ... main controller
+ - 1 ... sub controller
+ - 2 ... second main controller on s3c2416 and s3c2450
+ parent_irq contains the parent bit in the main controller and will be
+ ignored in main controllers
+ ctrl_irq contains the interrupt bit of the controller
+ type contains the trigger type to use
+
+Example:
+
+ interrupt-controller@4a000000 {
+ compatible = "samsung,s3c2410-irq";
+ reg = <0x4a000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells=<4>;
+ };
+
+ [...]
+
+ serial@50000000 {
+ compatible = "samsung,s3c2410-uart";
+ reg = <0x50000000 0x4000>;
+ interrupt-parent = <&subintc>;
+ interrupts = <1 28 0 4>, <1 28 1 4>;
+ };
+
+ rtc@57000000 {
+ compatible = "samsung,s3c2410-rtc";
+ reg = <0x57000000 0x100>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 30 0 3>, <0 8 0 3>;
+ };
- samsung,mfc-l : Base address of the second memory bank used by MFC
for DMA contiguous memory allocation and its size.
+
+Optional properties:
+ - samsung,power-domain : power-domain property defined with a phandle
+ to respective power domain.
+
+Example:
+SoC specific DT entry:
+
+mfc: codec@13400000 {
+ compatible = "samsung,mfc-v5";
+ reg = <0x13400000 0x10000>;
+ interrupts = <0 94 0>;
+ samsung,power-domain = <&pd_mfc>;
+};
+
+Board specific DT entry:
+
+codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
4 = active high level-sensitive
8 = active low level-sensitive
-Optional parent device properties:
-- reg : contains the PRCMU mailbox address for the AB8500 i2c port
-
The AB8500 consists of a large and varied group of sub-devices:
Device IRQ Names Supply Names Description
- stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic
- stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
-ab8500@5 {
+ab8500 {
compatible = "stericsson,ab8500";
- reg = <5>; /* mailbox 5 is i2c */
interrupts = <0 40 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
--- /dev/null
+Device tree bindings for NOR flash connect to TI GPMC
+
+NOR flash connected to the TI GPMC (found on OMAP boards) are represented as
+child nodes of the GPMC controller with a name of "nor".
+
+All timing relevant properties as well as generic GPMC child properties are
+explained in a separate documents. Please refer to
+Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Required properties:
+- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and
+ 16-bit devices and so must be either 1 or 2 bytes.
+- compatible: Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+- gpmc,cs-on-ns: Chip-select assertion time
+- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads
+- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes
+- gpmc,oe-on-ns: Output-enable assertion time
+- gpmc,oe-off-ns: Output-enable de-assertion time
+- gpmc,we-on-ns Write-enable assertion time
+- gpmc,we-off-ns: Write-enable de-assertion time
+- gpmc,access-ns: Start cycle to first data capture (read access)
+- gpmc,rd-cycle-ns: Total read cycle time
+- gpmc,wr-cycle-ns: Total write cycle time
+- linux,mtd-name: Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+- reg: Chip-select, base address (relative to chip-select)
+ and size of NOR flash. Note that base address will be
+ typically 0 as this is the start of the chip-select.
+
+Optional properties:
+- gpmc,XXX Additional GPMC timings and settings parameters. See
+ Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Optional properties for partiton table parsing:
+- #address-cells: should be set to 1
+- #size-cells: should be set to 1
+
+Example:
+
+gpmc: gpmc@6e000000 {
+ compatible = "ti,omap3430-gpmc", "simple-bus";
+ ti,hwmods = "gpmc";
+ reg = <0x6e000000 0x1000>;
+ interrupts = <20>;
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0x10000000 0x08000000>;
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ linux,mtd-name= "intel,pf48f6000m0y1be";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x08000000>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <186>;
+ gpmc,cs-wr-off-ns = <186>;
+ gpmc,adv-on-ns = <12>;
+ gpmc,adv-rd-off-ns = <48>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <54>;
+ gpmc,oe-off-ns = <168>;
+ gpmc,we-on-ns = <54>;
+ gpmc,we-off-ns = <168>;
+ gpmc,rd-cycle-ns = <186>;
+ gpmc,wr-cycle-ns = <186>;
+ gpmc,access-ns = <114>;
+ gpmc,page-burst-access-ns = <6>;
+ gpmc,bus-turnaround-ns = <12>;
+ gpmc,cycle2cycle-delay-ns = <18>;
+ gpmc,wr-data-mux-bus-ns = <90>;
+ gpmc,wr-access-ns = <186>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ partition@0 {
+ label = "bootloader-nor";
+ reg = <0 0x40000>;
+ };
+ partition@0x40000 {
+ label = "params-nor";
+ reg = <0x40000 0x40000>;
+ };
+ partition@0x80000 {
+ label = "kernel-nor";
+ reg = <0x80000 0x200000>;
+ };
+ partition@0x280000 {
+ label = "filesystem-nor";
+ reg = <0x240000 0x7d80000>;
+ };
+ };
+};
Required properties:
- reg: The CS line the peripheral is connected to
+ - gpmc,device-width Width of the ONENAND device connected to the GPMC
+ in bytes. Must be 1 or 2.
Optional properties:
onenand@0 {
reg = <0 0 0>; /* CS0, offset 0 */
+ gpmc,device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
--- /dev/null
+Device tree bindings for Ethernet chip connected to TI GPMC
+
+Besides being used to interface with external memory devices, the
+General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices
+such as ethernet controllers to processors using the TI GPMC as a data bus.
+
+Ethernet controllers connected to TI GPMC are represented as child nodes of
+the GPMC controller with an "ethernet" name.
+
+All timing relevant properties as well as generic GPMC child properties are
+explained in a separate documents. Please refer to
+Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+For the properties relevant to the ethernet controller connected to the GPMC
+refer to the binding documentation of the device. For example, the documentation
+for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt
+
+Child nodes need to specify the GPMC bus address width using the "bank-width"
+property but is possible that an ethernet controller also has a property to
+specify the I/O registers address width. Even when the GPMC has a maximum 16-bit
+address width, it supports devices with 32-bit word registers.
+For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an
+OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;".
+
+Required properties:
+- bank-width: Address width of the device in bytes. GPMC supports 8-bit
+ and 16-bit devices and so must be either 1 or 2 bytes.
+- compatible: Compatible string property for the ethernet child device.
+- gpmc,cs-on: Chip-select assertion time
+- gpmc,cs-rd-off: Chip-select de-assertion time for reads
+- gpmc,cs-wr-off: Chip-select de-assertion time for writes
+- gpmc,oe-on: Output-enable assertion time
+- gpmc,oe-off Output-enable de-assertion time
+- gpmc,we-on: Write-enable assertion time
+- gpmc,we-off: Write-enable de-assertion time
+- gpmc,access: Start cycle to first data capture (read access)
+- gpmc,rd-cycle: Total read cycle time
+- gpmc,wr-cycle: Total write cycle time
+- reg: Chip-select, base address (relative to chip-select)
+ and size of the memory mapped for the device.
+ Note that base address will be typically 0 as this
+ is the start of the chip-select.
+
+Optional properties:
+- gpmc,XXX Additional GPMC timings and settings parameters. See
+ Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Example:
+
+gpmc: gpmc@6e000000 {
+ compatible = "ti,omap3430-gpmc";
+ ti,hwmods = "gpmc";
+ reg = <0x6e000000 0x1000>;
+ interrupts = <20>;
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <5 0 0x2c000000 0x1000000>;
+
+ ethernet@5,0 {
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ reg = <5 0 0xff>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data;
+ gpmc,cs-on = <0>;
+ gpmc,cs-rd-off = <186>;
+ gpmc,cs-wr-off = <186>;
+ gpmc,adv-on = <12>;
+ gpmc,adv-rd-off = <48>;
+ gpmc,adv-wr-off = <48>;
+ gpmc,oe-on = <54>;
+ gpmc,oe-off = <168>;
+ gpmc,we-on = <54>;
+ gpmc,we-off = <168>;
+ gpmc,rd-cycle = <186>;
+ gpmc,wr-cycle = <186>;
+ gpmc,access = <114>;
+ gpmc,page-burst-access = <6>;
+ gpmc,bus-turnaround = <12>;
+ gpmc,cycle2cycle-delay = <18>;
+ gpmc,wr-data-mux-bus = <90>;
+ gpmc,wr-access = <186>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <16>;
+ vmmc-supply = <&vddvario>;
+ vmmc_aux-supply = <&vdd33a>;
+ reg-io-width = <4>;
+
+ smsc,save-mac-address;
+ };
+};
--- /dev/null
+VIA VT8500 and Wondermedia WM8xxx-series pinmux/gpio controller
+
+These SoCs contain a combined Pinmux/GPIO module. Each pin may operate as
+either a GPIO in, GPIO out or as an alternate function (I2C, SPI etc).
+
+Required properties:
+- compatible: "via,vt8500-pinctrl", "wm,wm8505-pinctrl", "wm,wm8650-pinctrl",
+ "wm8750-pinctrl" or "wm,wm8850-pinctrl"
+- reg: Should contain the physical address of the module's registers.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters.
+ bit 0 - active low
+
+Please refer to ../gpio/gpio.txt for a general description of GPIO bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Each pin configuration node lists the pin(s) to which it applies, and one or
+more of the mux functions to select on those pin(s), and pull-up/down
+configuration. Each subnode only affects those parameters that are explicitly
+listed. In other words, a subnode that lists only a mux function implies no
+information about any pull configuration. Similarly, a subnode that lists only
+a pull parameter implies no information about the mux function.
+
+Required subnode-properties:
+- wm,pins: An array of cells. Each cell contains the ID of a pin.
+
+Optional subnode-properties:
+- wm,function: Integer, containing the function to mux to the pin(s):
+ 0: GPIO in
+ 1: GPIO out
+ 2: alternate
+
+- wm,pull: Integer, representing the pull-down/up to apply to the pin(s):
+ 0: none
+ 1: down
+ 2: up
+
+Each of wm,function and wm,pull may contain either a single value which
+will be applied to all pins in wm,pins, or one value for each entry in
+wm,pins.
+
+Example:
+
+ pinctrl: pinctrl {
+ compatible = "wm,wm8505-pinctrl";
+ reg = <0xD8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
--- /dev/null
+= Reset Signal Device Tree Bindings =
+
+This binding is intended to represent the hardware reset signals present
+internally in most IC (SoC, FPGA, ...) designs. Reset signals for whole
+standalone chips are most likely better represented as GPIOs, although there
+are likely to be exceptions to this rule.
+
+Hardware blocks typically receive a reset signal. This signal is generated by
+a reset provider (e.g. power management or clock module) and received by a
+reset consumer (the module being reset, or a module managing when a sub-
+ordinate module is reset). This binding exists to represent the provider and
+consumer, and provide a way to couple the two together.
+
+A reset signal is represented by the phandle of the provider, plus a reset
+specifier - a list of DT cells that represents the reset signal within the
+provider. The length (number of cells) and semantics of the reset specifier
+are dictated by the binding of the reset provider, although common schemes
+are described below.
+
+A word on where to place reset signal consumers in device tree: It is possible
+in hardware for a reset signal to affect multiple logically separate HW blocks
+at once. In this case, it would be unwise to represent this reset signal in
+the DT node of each affected HW block, since if activated, an unrelated block
+may be reset. Instead, reset signals should be represented in the DT node
+where it makes most sense to control it; this may be a bus node if all
+children of the bus are affected by the reset signal, or an individual HW
+block node for dedicated reset signals. The intent of this binding is to give
+appropriate software access to the reset signals in order to manage the HW,
+rather than to slavishly enumerate the reset signal that affects each HW
+block.
+
+= Reset providers =
+
+Required properties:
+#reset-cells: Number of cells in a reset specifier; Typically 0 for nodes
+ with a single reset output and 1 for nodes with multiple
+ reset outputs.
+
+For example:
+
+ rst: reset-controller {
+ #reset-cells = <1>;
+ };
+
+= Reset consumers =
+
+Required properties:
+resets: List of phandle and reset specifier pairs, one pair
+ for each reset signal that affects the device, or that the
+ device manages. Note: if the reset provider specifies '0' for
+ #reset-cells, then only the phandle portion of the pair will
+ appear.
+
+Optional properties:
+reset-names: List of reset signal name strings sorted in the same order as
+ the resets property. Consumers drivers will use reset-names to
+ match reset signal names with reset specifiers.
+
+For example:
+
+ device {
+ resets = <&rst 20>;
+ reset-names = "reset";
+ };
+
+This represents a device with a single reset signal named "reset".
+
+ bus {
+ resets = <&rst 10> <&rst 11> <&rst 12> <&rst 11>;
+ reset-names = "i2s1", "i2s2", "dma", "mixer";
+ };
+
+This represents a bus that controls the reset signal of each of four sub-
+ordinate devices. Consider for example a bus that fails to operate unless no
+child device has reset asserted.
--- /dev/null
+Cadence TTC - Triple Timer Counter
+
+Required properties:
+- compatible : Should be "cdns,ttc".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 3 interrupts; one per timer channel.
+- clocks: phandle to the source clock
+
+Example:
+
+ttc0: ttc0@f8001000 {
+ interrupt-parent = <&intc>;
+ interrupts = < 0 10 4 0 11 4 0 12 4 >;
+ compatible = "cdns,ttc";
+ reg = <0xF8001000 0x1000>;
+ clocks = <&cpu_clk 3>;
+};
--- /dev/null
+Samsung's Multi Core Timer (MCT)
+
+The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+global timer and CPU local timers. The global timer is a 64-bit free running
+up-counter and can generate 4 interrupts when the counter reaches one of the
+four preset counter values. The CPU local timers are 32-bit free running
+down-counters and generate an interrupt when the counter expires. There is
+one CPU local timer instantiated in MCT for every CPU in the system.
+
+Required properties:
+
+- compatible: should be "samsung,exynos4210-mct".
+ (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
+ (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
+
+- reg: base address of the mct controller and length of the address space
+ it occupies.
+
+- interrupts: the list of interrupts generated by the controller. The following
+ should be the order of the interrupts specified. The local timer interrupts
+ should be specified after the four global timer interrupts have been
+ specified.
+
+ 0: Global Timer Interrupt 0
+ 1: Global Timer Interrupt 1
+ 2: Global Timer Interrupt 2
+ 3: Global Timer Interrupt 3
+ 4: Local Timer Interrupt 0
+ 5: Local Timer Interrupt 1
+ 6: ..
+ 7: ..
+ i: Local Timer Interrupt n
+
+Example 1: In this example, the system uses only the first global timer
+ interrupt generated by MCT and the remaining three global timer
+ interrupts are unused. Two local timer interrupts have been
+ specified.
+
+ mct@10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+ <0 42 0>, <0 48 0>;
+ };
+
+Example 2: In this example, the MCT global and local timer interrupts are
+ connected to two seperate interrupt controllers. Hence, an
+ interrupt-map is created to map the interrupts to the respective
+ interrupt controllers.
+
+ mct@101C0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &combiner 23 3>,
+ <0x4 0 &gic 0 120 0>,
+ <0x5 0 &gic 0 121 0>;
+ };
+ };
- "nvidia,tegra20-uart"
- "nxp,lpc3220-uart"
- "ibm,qpace-nwp-serial"
+ - "altr,16550-FIFO32"
+ - "altr,16550-FIFO64"
+ - "altr,16550-FIFO128"
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
--- /dev/null
+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+ EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+
+Optional properties:
+ - samsung,vbus-gpio: if present, specifies the GPIO that
+ needs to be pulled up for the bus to be powered.
+
+Example:
+
+ usb@12110000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12110000 0x100>;
+ interrupts = <0 71 0>;
+ samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+ };
+
+OHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
+ OHCI companion controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+
+Example:
+ usb@12120000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12120000 0x100>;
+ interrupts = <0 71 0>;
+ };
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/
* Microchip (TelCom) TCN75
- Prefix: 'lm75'
+ Prefix: 'tcn75'
Addresses scanned: none
Datasheet: Publicly available at the Microchip website
http://www.microchip.com/
Documentation:
http://www.diolan.com/i2c/u2c12.html
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
Introduction
------------
-
-Currently the ALPS touchpad driver supports four protocol versions in use by
-ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various
-protocol versions is contained in the following sections.
+Currently the ALPS touchpad driver supports five protocol versions in use by
+ALPS touchpads, called versions 1, 2, 3, 4 and 5.
+
+Since roughly mid-2010 several new ALPS touchpads have been released and
+integrated into a variety of laptops and netbooks. These new touchpads
+have enough behavior differences that the alps_model_data definition
+table, describing the properties of the different versions, is no longer
+adequate. The design choices were to re-define the alps_model_data
+table, with the risk of regression testing existing devices, or isolate
+the new devices outside of the alps_model_data table. The latter design
+choice was made. The new touchpad signatures are named: "Rushmore",
+"Pinnacle", and "Dolphin", which you will see in the alps.c code.
+For the purposes of this document, this group of ALPS touchpads will
+generically be called "new ALPS touchpads".
+
+We experimented with probing the ACPI interface _HID (Hardware ID)/_CID
+(Compatibility ID) definition as a way to uniquely identify the
+different ALPS variants but there did not appear to be a 1:1 mapping.
+In fact, it appeared to be an m:n mapping between the _HID and actual
+hardware type.
Detection
---------
report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
matched against known models in the alps_model_data_array.
-With protocol versions 3 and 4, the E7 report model signature is always
-73-02-64. To differentiate between these versions, the response from the
-"Enter Command Mode" sequence must be inspected as described below.
+For older touchpads supporting protocol versions 3 and 4, the E7 report
+model signature is always 73-02-64. To differentiate between these
+versions, the response from the "Enter Command Mode" sequence must be
+inspected as described below.
+
+The new ALPS touchpads have an E7 signature of 73-03-50 or 73-03-0A but
+seem to be better differentiated by the EC Command Mode response.
Command Mode
------------
register. Registers are written by writing the value one nibble at a time
using the same encoding used for addresses.
+For the new ALPS touchpads, the EC command is used to enter command
+mode. The response in the new ALPS touchpads is significantly different,
+and more important in determining the behavior. This code has been
+separated from the original alps_model_data table and put in the
+alps_identify function. For example, there seem to be two hardware init
+sequences for the "Dolphin" touchpads as determined by the second byte
+of the EC response.
+
Packet Format
-------------
well.
So far no v4 devices with tracksticks have been encountered.
+
+ALPS Absolute Mode - Protocol Version 5
+---------------------------------------
+This is basically Protocol Version 3 but with different logic for packet
+decode. It uses the same alps_process_touchpad_packet_v3 call with a
+specialized decode_fields function pointer to correctly interpret the
+packets. This appears to only be used by the Dolphin devices.
+
+For single-touch, the 6-byte packet format is:
+
+ byte 0: 1 1 0 0 1 0 0 0
+ byte 1: 0 x6 x5 x4 x3 x2 x1 x0
+ byte 2: 0 y6 y5 y4 y3 y2 y1 y0
+ byte 3: 0 M R L 1 m r l
+ byte 4: y10 y9 y8 y7 x10 x9 x8 x7
+ byte 5: 0 z6 z5 z4 z3 z2 z1 z0
+
+For mt, the format is:
+
+ byte 0: 1 1 1 n3 1 n2 n1 x24
+ byte 1: 1 y7 y6 y5 y4 y3 y2 y1
+ byte 2: ? x2 x1 y12 y11 y10 y9 y8
+ byte 3: 0 x23 x22 x21 x20 x19 x18 x17
+ byte 4: 0 x9 x8 x7 x6 x5 x4 x3
+ byte 5: 0 x16 x15 x14 x13 x12 x11 x10
enabled and the variable is automatically set to 2, otherwise
the strategy is disabled and the variable is set to 1.
+backup_only - BOOLEAN
+ 0 - disabled (default)
+ not 0 - enabled
+
+ If set, disable the director function while the server is
+ in backup mode to avoid packet loops for DR/TUN methods.
+
conntrack - BOOLEAN
0 - disabled (default)
not 0 - enabled
Proto [2 bytes]
Raw protocol(IP, IPv6, etc) frame.
+ 3.3 Multiqueue tuntap interface:
+
+ From version 3.8, Linux supports multiqueue tuntap which can uses multiple
+ file descriptors (queues) to parallelize packets sending or receiving. The
+ device allocation is the same as before, and if user wants to create multiple
+ queues, TUNSETIFF with the same device name must be called many times with
+ IFF_MULTI_QUEUE flag.
+
+ char *dev should be the name of the device, queues is the number of queues to
+ be created, fds is used to store and return the file descriptors (queues)
+ created to the caller. Each file descriptor were served as the interface of a
+ queue which could be accessed by userspace.
+
+ #include <linux/if.h>
+ #include <linux/if_tun.h>
+
+ int tun_alloc_mq(char *dev, int queues, int *fds)
+ {
+ struct ifreq ifr;
+ int fd, err, i;
+
+ if (!dev)
+ return -1;
+
+ memset(&ifr, 0, sizeof(ifr));
+ /* Flags: IFF_TUN - TUN device (no Ethernet headers)
+ * IFF_TAP - TAP device
+ *
+ * IFF_NO_PI - Do not provide packet information
+ * IFF_MULTI_QUEUE - Create a queue of multiqueue device
+ */
+ ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_MULTI_QUEUE;
+ strcpy(ifr.ifr_name, dev);
+
+ for (i = 0; i < queues; i++) {
+ if ((fd = open("/dev/net/tun", O_RDWR)) < 0)
+ goto err;
+ err = ioctl(fd, TUNSETIFF, (void *)&ifr);
+ if (err) {
+ close(fd);
+ goto err;
+ }
+ fds[i] = fd;
+ }
+
+ return 0;
+ err:
+ for (--i; i >= 0; i--)
+ close(fds[i]);
+ return err;
+ }
+
+ A new ioctl(TUNSETQUEUE) were introduced to enable or disable a queue. When
+ calling it with IFF_DETACH_QUEUE flag, the queue were disabled. And when
+ calling it with IFF_ATTACH_QUEUE flag, the queue were enabled. The queue were
+ enabled by default after it was created through TUNSETIFF.
+
+ fd is the file descriptor (queue) that we want to enable or disable, when
+ enable is true we enable it, otherwise we disable it
+
+ #include <linux/if.h>
+ #include <linux/if_tun.h>
+
+ int tun_set_queue(int fd, int enable)
+ {
+ struct ifreq ifr;
+
+ memset(&ifr, 0, sizeof(ifr));
+
+ if (enable)
+ ifr.ifr_flags = IFF_ATTACH_QUEUE;
+ else
+ ifr.ifr_flags = IFF_DETACH_QUEUE;
+
+ return ioctl(fd, TUNSETQUEUE, (void *)&ifr);
+ }
+
Universal TUN/TAP device driver Frequently Asked Question.
1. What platforms are supported by TUN/TAP driver ?
enable_msi - Enable Message Signaled Interrupt (MSI) (default = off)
power_save - Automatic power-saving timeout (in second, 0 =
disable)
- power_save_controller - Support runtime D3 of HD-audio controller
- (-1 = on for supported chip (default), false = off,
- true = force to on even for unsupported hardware)
+ power_save_controller - Reset HD-audio controller in power-saving mode
+ (default = on)
align_buffer_size - Force rounding of buffer/period sizes to multiples
of 128 bytes. This is more efficient in terms of memory
access but isn't required by the HDA spec and prevents
models depending on the codec chip. The list of available models
is found in HD-Audio-Models.txt
- The model name "genric" is treated as a special case. When this
+ The model name "generic" is treated as a special case. When this
model is given, the driver uses the generic codec parser without
"codec-patch". It's sometimes good for testing and debugging.
<H4>
7.2.4 Close Callback</H4>
The <TT>close</TT> callback is called when this device is closed by the
-applicaion. If any private data was allocated in open callback, it must
+application. If any private data was allocated in open callback, it must
be released in the close callback. The deletion of ALSA port should be
done here, too. This callback must not be NULL.
<H4>
status\input | 0 | 1 | else |
--------------+------------+------------+------------+
- not allocated |(do nothing)| alloc+swap | EINVAL |
+ not allocated |(do nothing)| alloc+swap |(do nothing)|
--------------+------------+------------+------------+
allocated | free | swap | clear |
--------------+------------+------------+------------+
F: drivers/platform/x86/asus*.c
F: drivers/platform/x86/eeepc*.c
-ASUS ASB100 HARDWARE MONITOR DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
-L: lm-sensors@lm-sensors.org
-S: Maintained
-F: drivers/hwmon/asb100.c
-
ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
M: Dan Williams <djbw@fb.com>
W: http://sourceforge.net/projects/xscaleiop
F: drivers/dma/at_hdmac_regs.h
F: include/linux/platform_data/dma-atmel.h
+ATMEL I2C DRIVER
+M: Ludovic Desroches <ludovic.desroches@atmel.com>
+L: linux-i2c@vger.kernel.org
+S: Supported
+F: drivers/i2c/busses/i2c-at91.c
+
ATMEL ISI DRIVER
M: Josh Wu <josh.wu@atmel.com>
L: linux-media@vger.kernel.org
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
M: Daniel Vetter <daniel.vetter@ffwll.ch>
-L: intel-gfx@lists.freedesktop.org (subscribers-only)
+L: intel-gfx@lists.freedesktop.org
L: dri-devel@lists.freedesktop.org
T: git git://people.freedesktop.org/~danvet/drm-intel
S: Supported
F: drivers/base/firmware*.c
F: include/linux/firmware.h
+FLASHSYSTEM DRIVER (IBM FlashSystem 70/80 PCI SSD Flash Card)
+M: Joshua Morris <josh.h.morris@us.ibm.com>
+M: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
+S: Maintained
+F: drivers/block/rsxx/
+
FLOPPY DRIVER
M: Jiri Kosina <jkosina@suse.cz>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
F: Documentation/i2c/busses/i2c-ismt
I2C/SMBUS STUB DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
+M: Jean Delvare <khali@linux-fr.org>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/i2c-stub.c
S: Maintained
F: drivers/usb/atm/ueagle-atm.c
+INA209 HARDWARE MONITOR DRIVER
+M: Guenter Roeck <linux@roeck-us.net>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/ina209
+F: Documentation/devicetree/bindings/i2c/ina209.txt
+F: drivers/hwmon/ina209.c
+
+INA2XX HARDWARE MONITOR DRIVER
+M: Guenter Roeck <linux@roeck-us.net>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/ina2xx
+F: drivers/hwmon/ina2xx.c
+F: include/linux/platform_data/ina2xx.h
+
INDUSTRY PACK SUBSYSTEM (IPACK)
M: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
M: Jens Taprogge <jens.taprogge@taprogge.org>
F: drivers/net/ethernet/marvell/sk*
MARVELL LIBERTAS WIRELESS DRIVER
-M: Dan Williams <dcbw@redhat.com>
L: libertas-dev@lists.infradead.org
-S: Maintained
+S: Orphan
F: drivers/net/wireless/libertas/
MARVELL MV643XX ETHERNET DRIVER
F: Documentation/hwmon/max6650
F: drivers/hwmon/max6650.c
+MAX6697 HARDWARE MONITOR DRIVER
+M: Guenter Roeck <linux@roeck-us.net>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/max6697
+F: Documentation/devicetree/bindings/i2c/max6697.txt
+F: drivers/hwmon/max6697.c
+F: include/linux/platform_data/max6697.h
+
MAXIRADIO FM RADIO RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
L: linux-media@vger.kernel.org
F: include/uapi/linux/netdevice.h
NETXEN (1/10) GbE SUPPORT
+M: Manish Chopra <manish.chopra@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: Rajesh Borundia <rajesh.borundia@qlogic.com>
L: netdev@vger.kernel.org
F: drivers/video/riva/
F: drivers/video/nvidia/
+NVM EXPRESS DRIVER
+M: Matthew Wilcox <willy@linux.intel.com>
+L: linux-nvme@lists.infradead.org
+T: git git://git.infradead.org/users/willy/linux-nvme.git
+S: Supported
+F: drivers/block/nvme.c
+F: include/linux/nvme.h
+
OMAP SUPPORT
M: Tony Lindgren <tony@atomide.com>
L: linux-omap@vger.kernel.org
F: arch/arm/*omap*/*clock*
OMAP POWER MANAGEMENT SUPPORT
-M: Kevin Hilman <khilman@ti.com>
+M: Kevin Hilman <khilman@deeprootsystems.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/*omap*/*pm*
OMAP GPIO DRIVER
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
-M: Kevin Hilman <khilman@ti.com>
+M: Kevin Hilman <khilman@deeprootsystems.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/gpio/gpio-omap.c
F: drivers/power/
PNP SUPPORT
-M: Adam Belay <abelay@mit.edu>
+M: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
M: Bjorn Helgaas <bhelgaas@google.com>
S: Maintained
F: drivers/pnp/
F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
+M: Rajesh Borundia <rajesh.borundia@qlogic.com>
+M: Shahed Shaikh <shahed.shaikh@qlogic.com>
M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: linux-driver@qlogic.com
F: Documentation/blockdev/ramdisk.txt
F: drivers/block/brd.c
-RAMSAM DRIVER (IBM RamSan 70/80 PCI SSD Flash Card)
-M: Joshua Morris <josh.h.morris@us.ibm.com>
-M: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
-S: Maintained
-F: drivers/block/rsxx/
-
RANDOM NUMBER DRIVER
M: Theodore Ts'o" <tytso@mit.edu>
S: Maintained
TI DAVINCI MACHINE SUPPORT
M: Sekhar Nori <nsekhar@ti.com>
-M: Kevin Hilman <khilman@ti.com>
+M: Kevin Hilman <khilman@deeprootsystems.com>
L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
T: git git://gitorious.org/linux-davinci/linux-davinci.git
Q: http://patchwork.kernel.org/project/linux-davinci/list/
S: Maintained
F: drivers/net/ethernet/sis/sis900.*
-SIS 96X I2C/SMBUS DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
-L: linux-i2c@vger.kernel.org
-S: Maintained
-F: Documentation/i2c/busses/i2c-sis96x
-F: drivers/i2c/busses/i2c-sis96x.c
-
SIS FRAMEBUFFER DRIVER
M: Thomas Winischhofer <thomas@winischhofer.net>
W: http://www.winischhofer.net/linuxsisvga.shtml
F: drivers/hwmon/sch5627.c
SMSC47B397 HARDWARE MONITOR DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
+M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/smsc47b397
SYNOPSYS ARC ARCHITECTURE
M: Vineet Gupta <vgupta@synopsys.com>
-L: linux-snps-arc@vger.kernel.org
S: Supported
F: arch/arc/
+F: Documentation/devicetree/bindings/arc/
+F: drivers/tty/serial/arc-uart.c
SYSV FILESYSTEM
M: Christoph Hellwig <hch@infradead.org>
VERSION = 3
PATCHLEVEL = 9
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc6
NAME = Unicycling Gorilla
# *DOCUMENTATION*
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
bool
-config HAVE_VIRT_TO_BUS
- bool
- help
- An architecture should select this if it implements the
- deprecated interface virt_to_bus(). All new architectures
- should probably not select this.
-
config HAVE_ARCH_SECCOMP_FILTER
bool
help
select HAVE_PERF_EVENTS
select HAVE_DMA_ATTRS
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW
LDFLAGS_vmlinux := -static -N #-relax
CHECKFLAGS += -D__alpha__ -m64
-cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y := -pipe -mno-fp-regs -ffixed-8
cflags-y += $(call cc-option, -fno-jump-tables)
cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4
#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
#define fd_cacheflush(addr,size) /* nothing */
#define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt,\
- IRQF_DISABLED, "floppy", NULL)
+ 0, "floppy", NULL)
#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL)
#ifdef CONFIG_PCI
return;
}
- /*
- * From here we must proceed with IPL_MAX. Note that we do not
- * explicitly enable interrupts afterwards - some MILO PALcode
- * (namely LX164 one) seems to have severe problems with RTI
- * at IPL 0.
- */
- local_irq_disable();
irq_enter();
generic_handle_irq_desc(irq, desc);
irq_exit();
unsigned long la_ptr, struct pt_regs *regs)
{
struct pt_regs *old_regs;
+
+ /*
+ * Disable interrupts during IRQ handling.
+ * Note that there is no matching local_irq_enable() due to
+ * severe problems with RTI at IPL0 and some MILO PALcode
+ * (namely LX164).
+ */
+ local_irq_disable();
switch (type) {
case 0:
#ifdef CONFIG_SMP
{
long cpu;
- local_irq_disable();
smp_percpu_timer_interrupt(regs);
cpu = smp_processor_id();
if (cpu != boot_cpuid) {
struct irqaction timer_irqaction = {
.handler = timer_interrupt,
- .flags = IRQF_DISABLED,
.name = "timer",
};
extern void free_reserved_mem(void *, void *);
extern void pcibios_claim_one_bus(struct pci_bus *);
+static struct resource irongate_io = {
+ .name = "Irongate PCI IO",
+ .flags = IORESOURCE_IO,
+};
static struct resource irongate_mem = {
.name = "Irongate PCI MEM",
.flags = IORESOURCE_MEM,
irongate = pci_get_bus_and_slot(0, 0);
bus->self = irongate;
+ bus->resource[0] = &irongate_io;
bus->resource[1] = &irongate_mem;
pci_bus_size_bridges(bus);
* all reported to the kernel as machine checks, so the handler
* is a nop so it can be called to count the individual events.
*/
- titan_request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(63+16, titan_intr_nop, 0,
"CChip Error", NULL);
- titan_request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(62+16, titan_intr_nop, 0,
"PChip 0 H_Error", NULL);
- titan_request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(61+16, titan_intr_nop, 0,
"PChip 1 H_Error", NULL);
- titan_request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(60+16, titan_intr_nop, 0,
"PChip 0 C_Error", NULL);
- titan_request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(59+16, titan_intr_nop, 0,
"PChip 1 C_Error", NULL);
/*
* Hook a couple of extra err interrupts that the
* common titan code won't.
*/
- titan_request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(53+16, titan_intr_nop, 0,
"NMI", NULL);
- titan_request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(50+16, titan_intr_nop, 0,
"Temperature Warning", NULL);
/*
int i;
for_each_sg(sg, s, nents, i)
- sg->dma_address = dma_map_page(dev, sg_page(s), s->offset,
+ s->dma_address = dma_map_page(dev, sg_page(s), s->offset,
s->length, dir);
return nents;
*/
#define ELF_PLATFORM (NULL)
-#define SET_PERSONALITY(ex) \
- set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
-
#endif
*-------------------------------------------------------------*/
.macro SAVE_ALL_EXCEPTION marker
- st \marker, [sp, 8]
+ st \marker, [sp, 8] /* orig_r8 */
st r0, [sp, 4] /* orig_r0, needed only for sys calls */
/* Restore r9 used to code the early prologue */
#ifdef CONFIG_KGDB
-#include <asm/user.h>
+#include <asm/ptrace.h>
/* to ensure compatibility with Linux 2.6.35, we don't implement the get/set
* register API yet */
};
#else
-static inline void kgdb_trap(struct pt_regs *regs, int param)
-{
-}
+#define kgdb_trap(regs, param)
#endif
#endif /* __ARC_KGDB_H__ */
#define orig_r8_IS_SCALL 0x0001
#define orig_r8_IS_SCALL_RESTARTED 0x0002
#define orig_r8_IS_BRKPT 0x0004
-#define orig_r8_IS_EXCPN 0x0004
+#define orig_r8_IS_EXCPN 0x0008
#define orig_r8_IS_IRQ1 0x0010
#define orig_r8_IS_IRQ2 0x0020
#include <linux/types.h>
int sys_clone_wrapper(int, int, int, int, int);
-int sys_fork_wrapper(void);
-int sys_vfork_wrapper(void);
int sys_cacheflush(uint32_t, uint32_t uint32_t);
int sys_arc_settls(void *);
int sys_arc_gettls(void);
*/
struct user_regs_struct {
- struct scratch {
+ struct {
long pad;
long bta, lp_start, lp_end, lp_count;
long status32, ret, blink, fp, gp;
long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
long sp;
} scratch;
- struct callee {
+ struct {
long pad;
long r25, r24, r23, r22, r21, r20;
long r19, r18, r17, r16, r15, r14, r13;
; using ERET won't work since next-PC has already committed
lr r12, [efa]
GET_CURR_TASK_FIELD_PTR TASK_THREAD, r11
- st r12, [r11, THREAD_FAULT_ADDR]
+ st r12, [r11, THREAD_FAULT_ADDR] ; thread.fault_address
; PRE Sys Call Ptrace hook
mov r0, sp ; pt_regs needed
;################### Special Sys Call Wrappers ##########################
-; TBD: call do_fork directly from here
-ARC_ENTRY sys_fork_wrapper
- SAVE_CALLEE_SAVED_USER
- bl @sys_fork
- DISCARD_CALLEE_SAVED_USER
-
- GET_CURR_THR_INFO_FLAGS r10
- btst r10, TIF_SYSCALL_TRACE
- bnz tracesys_exit
-
- b ret_from_system_call
-ARC_EXIT sys_fork_wrapper
-
-ARC_ENTRY sys_vfork_wrapper
- SAVE_CALLEE_SAVED_USER
- bl @sys_vfork
- DISCARD_CALLEE_SAVED_USER
-
- GET_CURR_THR_INFO_FLAGS r10
- btst r10, TIF_SYSCALL_TRACE
- bnz tracesys_exit
-
- b ret_from_system_call
-ARC_EXIT sys_vfork_wrapper
-
ARC_ENTRY sys_clone_wrapper
SAVE_CALLEE_SAVED_USER
bl @sys_clone
*/
#include <linux/kgdb.h>
+#include <linux/sched.h>
#include <asm/disasm.h>
#include <asm/cacheflush.h>
n += scnprintf(buf + n, len - n, "\n");
-#ifdef _ASM_GENERIC_UNISTD_H
n += scnprintf(buf + n, len - n,
- "OS ABI [v2]\t: asm-generic/{unistd,stat,fcntl}\n");
-#endif
+ "OS ABI [v3]\t: no-legacy-syscalls\n");
return buf;
}
#include <asm/syscalls.h>
#define sys_clone sys_clone_wrapper
-#define sys_fork sys_fork_wrapper
-#define sys_vfork sys_vfork_wrapper
#undef __SYSCALL
#define __SYSCALL(nr, call) [nr] = (call),
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
select KTIME_SCALAR
select PERF_USE_VMALLOC
select RTC_LIB
config ARCH_DOVE
bool "Marvell Dove"
select ARCH_REQUIRE_GPIOLIB
- select COMMON_CLK_DOVE
select CPU_V7
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
select HAVE_CLK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
+ select SOC_BUS
select SPARSE_IRQ
select USE_OF
help
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NO_IOPORT
+ select VIRT_TO_BUS
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select ARCH_HAS_CPUFREQ
- select ARCH_USES_GETTIMEOFFSET
+ select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
+ select MULTI_IRQ_HANDLER
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
help
bool "Samsung S3C64XX"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
- select ARCH_USES_GETTIMEOFFSET
select ARM_VIC
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select CPU_V6
+ select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
config ARCH_S5PC100
bool "Samsung S5PC100"
- select ARCH_USES_GETTIMEOFFSET
+ select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select CPU_V7
+ select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PV210/S5PC110 series based systems
-config ARCH_EXYNOS
+config ARCH_EXYNOS_SINGLE
bool "Samsung EXYNOS"
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE
- select CLKDEV_LOOKUP
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
select ISA_DMA
select NEED_MACH_MEMORY_H
select PCI
+ select VIRT_TO_BUS
select ZONE_DMA
help
Support for the StrongARM based Digital DNARD machine, also known
bool
config ARCH_MULTI_V6
- bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+ bool "ARMv6 based platforms (ARM11)"
select ARCH_MULTI_V6_V7
select CPU_V6
config ARCH_MULTI_V7
- bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+ bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
default y
select ARCH_MULTI_V6_V7
select ARCH_VEXPRESS
default 8
config IWMMXT
- bool "Enable iWMMXt support"
+ bool "Enable iWMMXt support" if !CPU_PJ4
depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
- default y if PXA27x || PXA3xx || ARCH_MMP
+ default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
to deadlock. This workaround puts DSB before executing ISB if
an abort may occur on cache maintenance.
+config ARM_ERRATA_798181
+ bool "ARM errata: TLBI/DSB failure on Cortex-A15"
+ depends on CPU_V7 && SMP
+ help
+ On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
+ adequately shooting down all use of the old entries. This
+ option enables the Linux kernel workaround for this erratum
+ which sends an IPI to the CPUs that are running the same ASID
+ as the one being invalidated.
+
endmenu
source "arch/arm/common/Kconfig"
bool
select ISA_DMA_API
-config ARCH_NO_VIRT_TO_BUS
- def_bool y
- depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
-
# Select ISA DMA interface
config ISA_DMA_API
bool
bool "Use local timer interrupts"
depends on SMP
default y
- select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
+ select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !CLKSRC_EXYNOS_MCT)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
+# The GPIO number here must be sorted by descending number. In case of
+# a multiplatform kernel, we just want the highest value required by the
+# selected platforms.
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
+ default 512 if SOC_OMAP5
default 355 if ARCH_U8500
+ default 352 if ARCH_VT8500
+ default 288 if ARCH_SUNXI
default 264 if MACH_H4700
- default 512 if SOC_OMAP5
- default 288 if ARCH_VT8500 || ARCH_SUNXI
default 0
help
Maximum number of GPIOs in the system.
config XEN
bool "Xen guest support on ARM (EXPERIMENTAL)"
- depends on ARM && OF
+ depends on ARM && AEABI && OF
depends on CPU_V7 && !CPU_V6
+ depends on !GENERIC_ATOMIC64
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS
bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS
bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS
bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && ARCH_EXYNOS
+ select DEBUG_EXYNOS_UART
bool "Use S3C UART 3 for low-level debug"
help
Say Y here if you want the debug print routines to direct
endchoice
+config DEBUG_EXYNOS_UART
+ bool
+
config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX51_UART || \
- DEBUG_IMX50_IMX53_UART || \
+ DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART
default 1
+ depends on ARCH_MXC
help
Choose UART port on which kernel low-level debug messages
should be output.
config DEBUG_LL_INCLUDE
string
+ default "debug/exynos.S" if DEBUG_EXYNOS_UART
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image System.map "$(INSTALL_PATH)"
-subdir- := bootp compressed
+subdir- := bootp compressed dts
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
exynos4210-universal_c210.dtb \
+ exynos4412-odroidx.dtb \
exynos4412-smdk4412.dtb \
+ exynos4412-origen.dtb \
+ exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5440-ssdk5440.dtb
};
mvsdio@d00d4000 {
- pinctrl-0 = <&sdio_pins2>;
+ pinctrl-0 = <&sdio_pins3>;
pinctrl-names = "default";
status = "okay";
/*
status = "okay";
/* No CD or WP GPIOs */
};
+
+ usb@d0050000 {
+ status = "okay";
+ };
+
+ usb@d0051000 {
+ status = "okay";
+ };
};
};
mpic: interrupt-controller@d0020000 {
compatible = "marvell,mpic";
#interrupt-cells = <1>;
- #address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
};
reg = <0xd0012000 0x100>;
reg-shift = <2>;
interrupts = <41>;
- reg-io-width = <4>;
+ reg-io-width = <1>;
status = "disabled";
};
serial@d0012100 {
reg = <0xd0012100 0x100>;
reg-shift = <2>;
interrupts = <42>;
- reg-io-width = <4>;
+ reg-io-width = <1>;
status = "disabled";
};
"mpp50", "mpp51", "mpp52";
marvell,function = "sd0";
};
+
+ sdio_pins3: sdio-pins3 {
+ marvell,pins = "mpp48", "mpp49", "mpp50",
+ "mpp51", "mpp52", "mpp53";
+ marvell,function = "sd0";
+ };
};
gpio0: gpio@d0018100 {
reg = <0xd0012200 0x100>;
reg-shift = <2>;
interrupts = <43>;
- reg-io-width = <4>;
+ reg-io-width = <1>;
status = "disabled";
};
serial@d0012300 {
reg = <0xd0012300 0x100>;
reg-shift = <2>;
interrupts = <44>;
- reg-io-width = <4>;
+ reg-io-width = <1>;
status = "disabled";
};
nand {
pinctrl_nand: nand-0 {
atmel,pins =
- <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */
- 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */
+ <3 0 0x1 0x0 /* PD0 periph A Read Enable */
+ 3 1 0x1 0x0 /* PD1 periph A Write Enable */
+ 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */
+ 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */
+ 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */
+ 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */
+ 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */
+ 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */
+ 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */
+ 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */
+ 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */
+ 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */
+ 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */
+ 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */
+ };
+
+ pinctrl_nand_16bits: nand_16bits-0 {
+ atmel,pins =
+ <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */
+ 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */
+ 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */
+ 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */
+ 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */
+ 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */
+ 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */
+ 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */
};
};
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
- clock-frequency = <150000000>;
+ clock-frequency = <250000000>;
};
};
};
samsung,i2c-max-bus-freq = <378000>;
gpios = <&gpb3 0 2 3 0>,
<&gpb3 1 2 3 0>;
+
+ max77686@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.8V_LDO_OUT2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.35V_BUCK_OUT6";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "P2.0V_BUCK_OUT7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "P2.85V_BUCK_OUT8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ };
+ };
};
i2c@12C70000 {
prcmu: prcmu@80157000 {
compatible = "stericsson,db8500-prcmu";
- reg = <0x80157000 0x1000>;
- reg-names = "prcmu";
+ reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+ reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
interrupts = <0 47 0x4>;
#address-cells = <1>;
#size-cells = <1>;
};
};
- ab8500@5 {
+ ab8500 {
compatible = "stericsson,ab8500";
- reg = <5>; /* mailbox 5 is i2c */
interrupt-parent = <&intc>;
interrupts = <0 40 0x4>;
interrupt-controller;
status = "disabled";
};
+ rtc@d8500 {
+ compatible = "marvell,orion-rtc";
+ reg = <0xd8500 0x20>;
+ };
+
crypto: crypto@30000 {
compatible = "marvell,orion-crypto";
reg = <0x30000 0x10000>,
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
interrupts = <0 43 0>;
+ clocks = <&clock 345>;
+ clock-names = "watchdog";
status = "disabled";
};
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <0 44 0>, <0 45 0>;
+ clocks = <&clock 346>;
+ clock-names = "rtc";
status = "disabled";
};
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
interrupts = <0 109 0>;
+ clocks = <&clock 347>;
+ clock-names = "keypad";
status = "disabled";
};
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
interrupts = <0 73 0>;
+ clocks = <&clock 297>, <&clock 145>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
interrupts = <0 74 0>;
+ clocks = <&clock 298>, <&clock 146>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
interrupts = <0 75 0>;
+ clocks = <&clock 299>, <&clock 147>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
interrupts = <0 76 0>;
+ clocks = <&clock 300>, <&clock 148>;
+ clock-names = "hsmmc", "mmc_busclk.2";
+ status = "disabled";
+ };
+
+ mfc: codec@13400000 {
+ compatible = "samsung,mfc-v5";
+ reg = <0x13400000 0x10000>;
+ interrupts = <0 94 0>;
+ samsung,power-domain = <&pd_mfc>;
status = "disabled";
};
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 52 0>;
+ clocks = <&clock 312>, <&clock 151>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
interrupts = <0 53 0>;
+ clocks = <&clock 313>, <&clock 152>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
+ clocks = <&clock 314>, <&clock 153>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
interrupts = <0 55 0>;
+ clocks = <&clock 315>, <&clock 154>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <0 58 0>;
+ clocks = <&clock 317>;
+ clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <0 59 0>;
+ clocks = <&clock 318>;
+ clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <0 60 0>;
+ clocks = <&clock 319>;
+ clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <0 61 0>;
+ clocks = <&clock 320>;
+ clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
interrupts = <0 62 0>;
+ clocks = <&clock 321>;
+ clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
interrupts = <0 63 0>;
+ clocks = <&clock 322>;
+ clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
interrupts = <0 64 0>;
+ clocks = <&clock 323>;
+ clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
interrupts = <0 65 0>;
+ clocks = <&clock 324>;
+ clock-names = "i2c";
status = "disabled";
};
rx-dma-channel = <&pdma0 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 327>, <&clock 159>;
+ clock-names = "spi", "spi_busclk0";
status = "disabled";
};
rx-dma-channel = <&pdma1 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 328>, <&clock 160>;
+ clock-names = "spi", "spi_busclk0";
status = "disabled";
};
rx-dma-channel = <&pdma0 8>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 329>, <&clock 161>;
+ clock-names = "spi", "spi_busclk0";
status = "disabled";
};
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 35 0>;
+ clocks = <&clock 292>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
+ clocks = <&clock 293>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
mdma1: mdma@12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <0 34 0>;
+ clocks = <&clock 279>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
};
};
};
status = "okay";
};
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
serial@13800000 {
status = "okay";
};
linux,default-trigger = "heartbeat";
};
};
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
status = "okay";
};
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
serial@13800000 {
status = "okay";
};
};
};
};
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <12000000>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
};
};
};
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
};
combiner:interrupt-controller@10440000 {
+ samsung,combiner-nr = <16>;
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
+ mct@10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+ clocks = <&clock 3>, <&clock 344>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &gic 0 57 0>,
+ <0x1 0 &gic 0 69 0>,
+ <0x2 0 &combiner 12 6>,
+ <0x3 0 &combiner 12 7>,
+ <0x4 0 &gic 0 42 0>,
+ <0x5 0 &gic 0 48 0>;
+ };
+ };
+
+ clock: clock-controller@0x10030000 {
+ compatible = "samsung,exynos4210-clock";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <2 2>, <3 2>;
+ };
+
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
gic:interrupt-controller@10490000 {
cpu-offset = <0x8000>;
};
+
+ interrupt-controller@10440000 {
+ samsung,combiner-nr = <18>;
+ interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+ <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+ <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+ <0 107 0>, <0 108 0>;
+ };
+
+ mct@10050000 {
+ compatible = "samsung,exynos4412-mct";
+ reg = <0x10050000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &gic 0 57 0>,
+ <0x1 0 &combiner 12 5>,
+ <0x2 0 &combiner 12 6>,
+ <0x3 0 &combiner 12 7>,
+ <0x4 0 &gic 1 12 0>,
+ <0x5 0 &gic 1 12 0>;
+ };
+ };
};
--- /dev/null
+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+ model = "Hardkernel ODROID-X board based on Exynos4412";
+ compatible = "hardkernel,odroid-x", "samsung,exynos4412";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "led1:heart";
+ gpios = <&gpc1 0 1>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led2 {
+ label = "led2:mmc0";
+ gpios = <&gpc1 2 1>;
+ default-state = "on";
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ mshc@12550000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ regulator_p3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "p3v3_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpa1 1 1>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ rtc@10070000 {
+ status = "okay";
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Insignal's Exynos4412 based Origen board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+ model = "Insignal Origen evaluation board based on Exynos4412";
+ compatible = "insignal,origen4412", "samsung,exynos4412";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs ="console=ttySAC2,115200";
+ };
+
+ mmc_reg: voltage-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpx1 1 0>;
+ enable-active-high;
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ vmmc-supply = <&mmc_reg>;
+ status = "okay";
+ };
+
+ mshc@12550000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+
+ i2c@13860000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
+ <&gpx2 4 0>,
+ <&gpx2 5 0>;
+
+ s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
+ <&gpm3 6 0>,
+ <&gpm3 7 0>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_M12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDDIOAP_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDDQ_PRE";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD18_2M";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MPLL";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD10_XPLL";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD10_MIPI";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD33_LCD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD18_MIPI";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD18_ABB1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD33_UOTG";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDIOPERI_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB02";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_USH";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDIOAP_MMC012_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDDIOPERI_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "DVDD25";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VDD28_CAM";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VDD28_AF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "VDDA28_2M";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "VDD28_TF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VDD33_A31";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "VDD18_CAM";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "VDD18_A31";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "GPS_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "DVDD12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_m12";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd12_5m";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vddf28_emmc";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+ };
+ };
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
};
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
serial@13800000 {
status = "okay";
};
serial@13830000 {
status = "okay";
};
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
gic:interrupt-controller@10490000 {
cpu-offset = <0x4000>;
};
+
+ interrupt-controller@10440000 {
+ samsung,combiner-nr = <20>;
+ interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+ <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+ <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+ <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+ };
+
+ mct@10050000 {
+ compatible = "samsung,exynos4412-mct";
+ reg = <0x10050000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>, <6 0>, <7 0>;
+ clocks = <&clock 3>, <&clock 344>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &gic 0 57 0>,
+ <0x1 0 &combiner 12 5>,
+ <0x2 0 &combiner 12 6>,
+ <0x3 0 &combiner 12 7>,
+ <0x4 0 &gic 1 12 0>,
+ <0x5 0 &gic 1 12 0>,
+ <0x6 0 &gic 1 12 0>,
+ <0x7 0 &gic 1 12 0>;
+ };
+ };
};
<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
};
+ clock: clock-controller@0x10030000 {
+ compatible = "samsung,exynos4412-clock";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11400000 0x1000>;
--- /dev/null
+/*
+ * Samsung's Exynos5250 based Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+ model = "Insignal Arndale evaluation board based on EXYNOS5250";
+ compatible = "insignal,arndale", "samsung,exynos5250";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttySAC2,115200";
+ };
+
+ i2c@12C60000 {
+ status = "disabled";
+ };
+
+ i2c@12C70000 {
+ status = "disabled";
+ };
+
+ i2c@12C80000 {
+ status = "disabled";
+ };
+
+ i2c@12C90000 {
+ status = "disabled";
+ };
+
+ i2c@12CA0000 {
+ status = "disabled";
+ };
+
+ i2c@12CB0000 {
+ status = "disabled";
+ };
+
+ i2c@12CC0000 {
+ status = "disabled";
+ };
+
+ i2c@12CD0000 {
+ status = "disabled";
+ };
+
+ i2c@121D0000 {
+ status = "disabled";
+ };
+
+ dwmmc_0: dwmmc0@12200000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
+ <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
+ <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>,
+ <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
+ <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>;
+ };
+ };
+
+ dwmmc_1: dwmmc1@12210000 {
+ status = "disabled";
+ };
+
+ dwmmc_2: dwmmc2@12220000 {
+ num-slots = <1>;
+ supports-highspeed;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+ gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
+ <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
+ <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+ };
+ };
+
+ dwmmc_3: dwmmc3@12230000 {
+ status = "disabled";
+ };
+
+ spi_0: spi@12d20000 {
+ status = "disabled";
+ };
+
+ spi_1: spi@12d30000 {
+ status = "disabled";
+ };
+
+ spi_2: spi@12d40000 {
+ status = "disabled";
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&wm8994>;
};
+
+ usb@12110000 {
+ samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+ };
+
+ dp-controller {
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
<&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
};
};
+
+ usb@12110000 {
+ samsung,vbus-gpio = <&gpx1 1 1 3 3>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
i2c8 = &i2c_8;
};
+ pd_gsc: gsc-power-domain@0x10044000 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044000 0x20>;
+ };
+
+ pd_mfc: mfc-power-domain@0x10044040 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044040 0x20>;
+ };
+
+ clock: clock-controller@0x10010000 {
+ compatible = "samsung,exynos5250-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ };
+
gic:interrupt-controller@10481000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
};
+ mct@101C0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+ clocks = <&clock 1>, <&clock 335>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &combiner 23 3>,
+ <0x1 0 &combiner 23 4>,
+ <0x2 0 &combiner 25 2>,
+ <0x3 0 &combiner 25 3>,
+ <0x4 0 &gic 0 120 0>,
+ <0x5 0 &gic 0 121 0>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <1 2>, <22 4>;
+ };
+
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x101D0000 0x100>;
interrupts = <0 42 0>;
+ clocks = <&clock 336>;
+ clock-names = "watchdog";
};
codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
+ samsung,power-domain = <&pd_mfc>;
};
rtc {
compatible = "samsung,s3c6410-rtc";
reg = <0x101E0000 0x100>;
interrupts = <0 43 0>, <0 44 0>;
+ clocks = <&clock 337>;
+ clock-names = "rtc";
};
tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
+ clocks = <&clock 338>;
+ clock-names = "tmu_apbif";
};
serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <0 51 0>;
+ clocks = <&clock 289>, <&clock 146>;
+ clock-names = "uart", "clk_uart_baud0";
};
serial@12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
interrupts = <0 52 0>;
+ clocks = <&clock 290>, <&clock 147>;
+ clock-names = "uart", "clk_uart_baud0";
};
serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
interrupts = <0 53 0>;
+ clocks = <&clock 291>, <&clock 148>;
+ clock-names = "uart", "clk_uart_baud0";
};
serial@12C30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C30000 0x100>;
interrupts = <0 54 0>;
+ clocks = <&clock 292>, <&clock 149>;
+ clock-names = "uart", "clk_uart_baud0";
};
sata@122F0000 {
compatible = "samsung,exynos5-sata-ahci";
reg = <0x122F0000 0x1ff>;
interrupts = <0 115 0>;
+ clocks = <&clock 277>, <&clock 143>;
+ clock-names = "sata", "sclk_sata";
};
sata-phy@12170000 {
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 294>;
+ clock-names = "i2c";
};
i2c_1: i2c@12C70000 {
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 295>;
+ clock-names = "i2c";
};
i2c_2: i2c@12C80000 {
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 296>;
+ clock-names = "i2c";
};
i2c_3: i2c@12C90000 {
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 297>;
+ clock-names = "i2c";
};
i2c_4: i2c@12CA0000 {
interrupts = <0 60 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 298>;
+ clock-names = "i2c";
};
i2c_5: i2c@12CB0000 {
interrupts = <0 61 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 299>;
+ clock-names = "i2c";
};
i2c_6: i2c@12CC0000 {
interrupts = <0 62 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 300>;
+ clock-names = "i2c";
};
i2c_7: i2c@12CD0000 {
interrupts = <0 63 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 301>;
+ clock-names = "i2c";
};
i2c_8: i2c@12CE0000 {
interrupts = <0 64 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 302>;
+ clock-names = "i2c";
};
i2c@121D0000 {
reg = <0x121D0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 288>;
+ clock-names = "i2c";
};
spi_0: spi@12d20000 {
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 304>, <&clock 154>;
+ clock-names = "spi", "spi_busclk0";
};
spi_1: spi@12d30000 {
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 305>, <&clock 155>;
+ clock-names = "spi", "spi_busclk0";
};
spi_2: spi@12d40000 {
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 306>, <&clock 156>;
+ clock-names = "spi", "spi_busclk0";
};
dwmmc_0: dwmmc0@12200000 {
interrupts = <0 75 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 280>, <&clock 139>;
+ clock-names = "biu", "ciu";
};
dwmmc_1: dwmmc1@12210000 {
interrupts = <0 76 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 281>, <&clock 140>;
+ clock-names = "biu", "ciu";
};
dwmmc_2: dwmmc2@12220000 {
interrupts = <0 77 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 282>, <&clock 141>;
+ clock-names = "biu", "ciu";
};
dwmmc_3: dwmmc3@12230000 {
interrupts = <0 78 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 283>, <&clock 142>;
+ clock-names = "biu", "ciu";
};
i2s0: i2s@03830000 {
dma-names = "tx", "rx";
};
+ usb@12110000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12110000 0x100>;
+ interrupts = <0 71 0>;
+ };
+
+ usb@12120000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12120000 0x100>;
+ interrupts = <0 71 0>;
+ };
+
amba {
#address-cells = <1>;
#size-cells = <1>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <0 34 0>;
+ clocks = <&clock 275>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <0 35 0>;
+ clocks = <&clock 276>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
+ clocks = <&clock 271>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
+ clocks = <&clock 271>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
};
};
+
gsc_0: gsc@0x13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
+ samsung,power-domain = <&pd_gsc>;
+ clocks = <&clock 256>;
+ clock-names = "gscl";
};
gsc_1: gsc@0x13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
+ samsung,power-domain = <&pd_gsc>;
+ clocks = <&clock 257>;
+ clock-names = "gscl";
};
gsc_2: gsc@0x13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
interrupts = <0 87 0>;
+ samsung,power-domain = <&pd_gsc>;
+ clocks = <&clock 258>;
+ clock-names = "gscl";
};
gsc_3: gsc@0x13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
interrupts = <0 88 0>;
+ samsung,power-domain = <&pd_gsc>;
+ clocks = <&clock 259>;
+ clock-names = "gscl";
};
hdmi {
compatible = "samsung,exynos5-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
+ clocks = <&clock 333>, <&clock 136>, <&clock 137>,
+ <&clock 333>, <&clock 333>;
+ clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+ "sclk_hdmiphy", "hdmiphy";
};
mixer {
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
};
+
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b0000 0x1000>;
+ interrupts = <10 3>;
+ interrupt-parent = <&combiner>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dptx-phy {
+ reg = <0x10040720>;
+ samsung,enable-mask = <1>;
+ };
+ };
};
status = "disabled";
};
- i2c@F0000 {
- status = "disabled";
- };
-
- i2c@100000 {
- status = "disabled";
- };
-
- watchdog {
- status = "disabled";
- };
-
- rtc {
- status = "disabled";
+ fixed-rate-clocks {
+ xtal {
+ compatible = "samsung,clock-xtal";
+ clock-frequency = <50000000>;
+ };
};
};
interrupt-parent = <&gic>;
+ clock: clock-controller@0x160000 {
+ compatible = "samsung,exynos5440-clock";
+ reg = <0x160000 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic:interrupt-controller@2E0000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
};
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
cpu@0 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <0>;
};
cpu@1 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 14 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <1>;
};
cpu@2 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 14 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <2>;
};
cpu@3 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 14 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <3>;
};
};
- common {
- compatible = "samsung,exynos5440";
-
+ timer {
+ compatible = "arm,cortex-a15-timer",
+ "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ clock-frequency = <50000000>;
};
serial@B0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
interrupts = <0 2 0>;
+ clocks = <&clock 21>, <&clock 21>;
+ clock-names = "uart", "clk_uart_baud0";
};
serial@C0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
interrupts = <0 3 0>;
+ clocks = <&clock 21>, <&clock 21>;
+ clock-names = "uart", "clk_uart_baud0";
};
spi {
rx-dma-channel = <&pdma0 4>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 21>, <&clock 16>;
+ clock-names = "spi", "spi_busclk0";
};
pinctrl {
};
i2c@F0000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos5440-i2c";
reg = <0xF0000 0x1000>;
interrupts = <0 5 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 21>;
+ clock-names = "i2c";
};
i2c@100000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos5440-i2c";
reg = <0x100000 0x1000>;
interrupts = <0 6 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 21>;
+ clock-names = "i2c";
};
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
interrupts = <0 1 0>;
+ clocks = <&clock 21>;
+ clock-names = "watchdog";
};
amba {
compatible = "arm,pl330", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <0 34 0>;
+ clocks = <&clock 21>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121000 0x1000>;
interrupts = <0 35 0>;
+ clocks = <&clock 21>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
};
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
interrupts = <0 17 0>, <0 16 0>;
+ clocks = <&clock 21>;
+ clock-names = "rtc";
};
};
};
};
- ab8500@5 {
+ ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
};
};
- ab8500@5 {
+ ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
fsl,pins = <689 0x10000 /* DISP1_DRDY */
482 0x10000 /* DISP1_HSYNC */
489 0x10000 /* DISP1_VSYNC */
- 684 0x10000 /* DISP1_DAT_0 */
515 0x10000 /* DISP1_DAT_22 */
523 0x10000 /* DISP1_DAT_23 */
- 543 0x10000 /* DISP1_DAT_21 */
+ 545 0x10000 /* DISP1_DAT_21 */
553 0x10000 /* DISP1_DAT_20 */
558 0x10000 /* DISP1_DAT_19 */
564 0x10000 /* DISP1_DAT_18 */
ocp@f1000000 {
serial@12000 {
- clock-frequency = <166666667>;
status = "okay";
};
serial@12100 {
- clock-frequency = <166666667>;
status = "okay";
};
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
nand@3000000 {
+ chip-delay = <40>;
status = "okay";
partition@0 {
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
ocp@f1000000 {
serial@12000 {
- clock-frequency = <166666667>;
status = "okay";
};
};
ocp@f1000000 {
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
};
serial@12000 {
- clock-frequency = <166666667>;
status = "okay";
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
ocp@f1000000 {
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
serial@12100 {
- clock-frequency = <200000000>;
status = "ok";
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <35>, <36>, <37>, <38>;
+ clocks = <&gate_clk 7>;
};
gpio1: gpio@10140 {
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <39>, <40>, <41>;
+ clocks = <&gate_clk 7>;
};
serial@12000 {
reg-shift = <2>;
interrupts = <33>;
clocks = <&gate_clk 7>;
- /* set clock-frequency in board dts */
status = "disabled";
};
reg-shift = <2>;
interrupts = <34>;
clocks = <&gate_clk 7>;
- /* set clock-frequency in board dts */
status = "disabled";
};
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
+ clocks = <&gate_clk 7>;
};
spi@10600 {
};
};
+ /* HS USB Port 2 RESET */
+ hsusb2_reset: hsusb2_reset_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_reset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 19 0>; /* gpio_147 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ /* HS USB Port 2 Power */
+ hsusb2_power: hsusb2_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2_phy {
+ compatible = "usb-nop-xceiv";
+ reset-supply = <&hsusb2_reset>;
+ vcc-supply = <&hsusb2_power>;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb2_pins
+ >;
+
+ hsusbb2_pins: pinmux_hsusbb2_pins {
+ pinctrl-single,pins = <
+ 0x5c0 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */
+ 0x5c2 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */
+ 0x5c4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */
+ 0x5c6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */
+ 0x5c8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */
+ 0x5cA 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */
+ 0x1a4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */
+ 0x1a6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */
+ 0x1a8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */
+ 0x1aa 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */
+ 0x1ac 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */
+ 0x1ae 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */
+ >;
+ };
};
&i2c1 {
&mmc3 {
status = "disabled";
};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(1) */
+ ti,pullups = <0x000002>;
+ /*
+ * pulldowns:
+ * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c4>;
+};
ti,timer-alwon;
ti,timer-secure;
};
+
+ usbhstll: usbhstll@48062000 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x48062000 0x1000>;
+ interrupts = <78>;
+ ti,hwmods = "usb_tll_hs";
+ };
+
+ usbhshost: usbhshost@48064000 {
+ compatible = "ti,usbhs-host";
+ reg = <0x48064000 0x400>;
+ ti,hwmods = "usb_host_hs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbhsohci: ohci@48064400 {
+ compatible = "ti,ohci-omap3", "usb-ohci";
+ reg = <0x48064400 0x400>;
+ interrupt-parent = <&intc>;
+ interrupts = <76>;
+ };
+
+ usbhsehci: ehci@48064800 {
+ compatible = "ti,ehci-omap", "usb-ehci";
+ reg = <0x48064800 0x400>;
+ interrupt-parent = <&intc>;
+ interrupts = <77>;
+ };
+ };
+
};
};
ti,hwmods = "timer11";
ti,timer-pwm;
};
+
+ usbhstll: usbhstll@4a062000 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x4a062000 0x1000>;
+ interrupts = <0 78 0x4>;
+ ti,hwmods = "usb_tll_hs";
+ };
+
+ usbhshost: usbhshost@4a064000 {
+ compatible = "ti,usbhs-host";
+ reg = <0x4a064000 0x800>;
+ ti,hwmods = "usb_host_hs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbhsohci: ohci@4a064800 {
+ compatible = "ti,ohci-omap3", "usb-ohci";
+ reg = <0x4a064800 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 76 0x4>;
+ };
+
+ usbhsehci: ehci@4a064c00 {
+ compatible = "ti,ehci-omap", "usb-ehci";
+ reg = <0x4a064c00 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 77 0x4>;
+ };
+ };
};
};
/ {
model = "LaCie Ethernet Disk mini V2";
- compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x";
+ compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
memory {
reg = <0x00000000 0x4000000>; /* 64 MB */
compatible = "marvell,orion5x";
interrupt-parent = <&intc>;
+ aliases {
+ gpio0 = &gpio0;
+ };
intc: interrupt-controller {
compatible = "marvell,orion-intc", "marvell,intc";
interrupt-controller;
#gpio-cells = <2>;
gpio-controller;
reg = <0x10100 0x40>;
- ngpio = <32>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <6>, <7>, <8>, <9>;
};
reg = <0x90000 0x10000>,
<0xf2200000 0x800>;
reg-names = "regs", "sram";
- interrupts = <22>;
+ interrupts = <28>;
status = "okay";
};
};
--- /dev/null
+/*
+ * Device Tree Source for Renesas r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "renesas,r8a7779";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ };
+ };
+
+ gic: interrupt-controller@f0001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xf0001000 0x1000>,
+ <0xf0000100 0x100>;
+ };
+
+ i2c0: i2c@0xffc70000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0xffc70000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 79 0x4>;
+ };
+
+ i2c1: i2c@0xffc71000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0xffc71000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 82 0x4>;
+ };
+
+ i2c2: i2c@0xffc72000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0xffc72000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 80 0x4>;
+ };
+
+ i2c3: i2c@0xffc73000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0xffc73000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 81 0x4>;
+ };
+
+ thermal@ffc48000 {
+ compatible = "renesas,rcar-thermal";
+ reg = <0xffc48000 0x38>;
+ };
+
+ sata: sata@fc600000 {
+ compatible = "renesas,rcar-sata";
+ reg = <0xfc600000 0x2000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 100 0x4>;
+ };
+};
};
};
- ab8500@5 {
+ ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
compatible = "arm,pl330", "arm,primecell";
reg = <0xffe01000 0x1000>;
interrupts = <0 180 4>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
};
serial@70006300 {
status = "okay";
- clock-frequency = <408000000>;
};
pmc {
nvidia,invert-interrupt;
};
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
};
serial@70006300 {
status = "okay";
- clock-frequency = <408000000>;
};
pmc {
nvidia,invert-interrupt;
};
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
};
0 42 0x04
0 121 0x04
0 122 0x04>;
+ clocks = <&tegra_car 5>;
};
tegra_car: clock {
- compatible = "nvidia,tegra114-car, nvidia,tegra30-car";
+ compatible = "nvidia,tegra114-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
};
reg-shift = <2>;
interrupts = <0 36 0x04>;
status = "disabled";
+ clocks = <&tegra_car 6>;
};
serial@70006040 {
reg-shift = <2>;
interrupts = <0 37 0x04>;
status = "disabled";
+ clocks = <&tegra_car 192>;
};
serial@70006200 {
reg-shift = <2>;
interrupts = <0 46 0x04>;
status = "disabled";
+ clocks = <&tegra_car 55>;
};
serial@70006300 {
reg-shift = <2>;
interrupts = <0 90 0x04>;
status = "disabled";
+ clocks = <&tegra_car 65>;
};
rtc {
compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
+ clocks = <&tegra_car 4>;
};
pmc {
- compatible = "nvidia,tegra114-pmc", "nvidia,tegra30-pmc";
+ compatible = "nvidia,tegra114-pmc";
reg = <0x7000e400 0x400>;
+ clocks = <&tegra_car 261>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
};
iommu {
};
sdhci@c8000600 {
- cd-gpios = <&gpio 23 0>; /* gpio PC7 */
+ cd-gpios = <&gpio 23 1>; /* gpio PC7 */
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
sound {
sdhci@c8000200 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
bus-width = <4>;
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ cd-gpios = <&gpio 58 1>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <8>;
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
kbc {
status = "okay";
nvidia,debounce-delay-ms = <2>;
sdhci@c8000000 {
status = "okay";
- cd-gpios = <&gpio 173 0>; /* gpio PV5 */
+ cd-gpios = <&gpio 173 1>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 169 0>; /* gpio PV1 */
bus-width = <4>;
bus-width = <8>;
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
bus-width = <8>;
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
};
sdhci@c8000600 {
- cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ cd-gpios = <&gpio 58 1>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
bus-width = <4>;
status = "okay";
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 121 0>; /* gpio PP1 */
+ cd-gpios = <&gpio 121 1>; /* gpio PP1 */
wp-gpios = <&gpio 122 0>; /* gpio PP2 */
bus-width = <4>;
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio 191 1>; /* gpio PX7, active low */
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
bus-width = <8>;
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
sdhci@c8000400 {
status = "okay";
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 173 0>; /* gpio PV5 */
bus-width = <8>;
};
bus-width = <8>;
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
kbc {
status = "okay";
nvidia,debounce-delay-ms = <20>;
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0x304>;
+ clocks = <&tegra_car 132>;
};
intc: interrupt-controller {
0 1 0x04
0 41 0x04
0 42 0x04>;
+ clocks = <&tegra_car 5>;
};
tegra_car: clock {
compatible = "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
+ clocks = <&tegra_car 4>;
};
i2c@7000c000 {
spi@7000d800 {
compatible = "nvidia,tegra20-slink";
- reg = <0x7000d480 0x200>;
+ reg = <0x7000d800 0x200>;
interrupts = <0 83 0x04>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
pmc {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
+ clocks = <&tegra_car 110>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
};
memory-controller@7000f000 {
sdhci@78000000 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
bus-width = <8>;
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
sdhci@78000000 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
bus-width = <8>;
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0xf04>;
+ clocks = <&tegra_car 214>;
};
intc: interrupt-controller {
0 42 0x04
0 121 0x04
0 122 0x04>;
+ clocks = <&tegra_car 5>;
};
tegra_car: clock {
compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
+ clocks = <&tegra_car 4>;
};
i2c@7000c000 {
spi@7000d800 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
- reg = <0x7000d480 0x200>;
+ reg = <0x7000d800 0x200>;
interrupts = <0 83 0x04>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
};
pmc {
- compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
+ compatible = "nvidia,tegra30-pmc";
reg = <0x7000e400 0x400>;
+ clocks = <&tegra_car 218>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
};
memory-controller {
#interrupt-cells = <1>;
};
- gpio: gpio-controller@d8110000 {
- compatible = "via,vt8500-gpio";
- gpio-controller;
+ pinctrl: pinctrl@d8110000 {
+ compatible = "via,vt8500-pinctrl";
reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
pmc@d8130000 {
interrupts = <56 57 58 59 60 61 62 63>;
};
- gpio: gpio-controller@d8110000 {
- compatible = "wm,wm8505-gpio";
- gpio-controller;
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8505-pinctrl";
reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
pmc@d8130000 {
interrupts = <56 57 58 59 60 61 62 63>;
};
- gpio: gpio-controller@d8110000 {
- compatible = "wm,wm8650-gpio";
- gpio-controller;
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8650-pinctrl";
reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
pmc@d8130000 {
interrupts = <56 57 58 59 60 61 62 63>;
};
- gpio: gpio-controller@d8110000 {
- compatible = "wm,wm8650-gpio";
- gpio-controller;
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8850-pinctrl";
reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
pmc@d8130000 {
};
ttc0: ttc0@f8001000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "xlnx,ttc";
+ interrupt-parent = <&intc>;
+ interrupts = < 0 10 4 0 11 4 0 12 4 >;
+ compatible = "cdns,ttc";
reg = <0xF8001000 0x1000>;
clocks = <&cpu_clk 3>;
clock-names = "cpu_1x";
clock-ranges;
-
- ttc0_0: ttc0.0 {
- status = "disabled";
- reg = <0>;
- interrupts = <0 10 4>;
- };
- ttc0_1: ttc0.1 {
- status = "disabled";
- reg = <1>;
- interrupts = <0 11 4>;
- };
- ttc0_2: ttc0.2 {
- status = "disabled";
- reg = <2>;
- interrupts = <0 12 4>;
- };
};
ttc1: ttc1@f8002000 {
- #interrupt-parent = <&intc>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "xlnx,ttc";
+ interrupt-parent = <&intc>;
+ interrupts = < 0 37 4 0 38 4 0 39 4 >;
+ compatible = "cdns,ttc";
reg = <0xF8002000 0x1000>;
clocks = <&cpu_clk 3>;
clock-names = "cpu_1x";
clock-ranges;
-
- ttc1_0: ttc1.0 {
- status = "disabled";
- reg = <0>;
- interrupts = <0 37 4>;
- };
- ttc1_1: ttc1.1 {
- status = "disabled";
- reg = <1>;
- interrupts = <0 38 4>;
- };
- ttc1_2: ttc1.2 {
- status = "disabled";
- reg = <2>;
- interrupts = <0 39 4>;
- };
};
};
};
&ps_clk {
clock-frequency = <33333330>;
};
-
-&ttc0_0 {
- status = "ok";
- compatible = "xlnx,ttc-counter-clocksource";
-};
-
-&ttc0_1 {
- status = "ok";
- compatible = "xlnx,ttc-counter-clockevent";
-};
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_EXYNOS_SINGLE=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDKC210=y
CONFIG_MACH_ARMLEX4210=y
CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_STORAGE=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
void (*delay)(unsigned long);
void (*const_udelay)(unsigned long);
void (*udelay)(unsigned long);
- bool const_clock;
+ unsigned long ticks_per_jiffy;
} arm_delay_ops;
#define __delay(n) arm_delay_ops.delay(n)
#endif
#endif
+/*
+ * Needed to be able to broadcast the TLB invalidation for kmap.
+ */
+#ifdef CONFIG_ARM_ERRATA_798181
+#undef ARCH_NEEDS_KMAP_HIGH_GET
+#endif
+
#ifdef ARCH_NEEDS_KMAP_HIGH_GET
extern void *kmap_high_get(struct page *page);
#else
void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; })
+DECLARE_PER_CPU(atomic64_t, active_asids);
+
#else /* !CONFIG_CPU_HAS_ASID */
#ifdef CONFIG_MMU
isb();
}
+#ifdef CONFIG_ARM_ERRATA_798181
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+ /*
+ * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0.
+ */
+ asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
+ dsb();
+}
+#else
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+}
+#endif
+
/*
* flush_pmd_entry
*
#define _ASM_ARM_XEN_EVENTS_H
#include <asm/ptrace.h>
+#include <asm/atomic.h>
enum ipi_vector {
XEN_PLACEHOLDER_VECTOR,
return raw_irqs_disabled_flags(regs->ARM_cpsr);
}
-/*
- * We cannot use xchg because it does not support 8-byte
- * values. However it is safe to use {ldr,dtd}exd directly because all
- * platforms which Xen can run on support those instructions.
- */
-static inline xen_ulong_t xchg_xen_ulong(xen_ulong_t *ptr, xen_ulong_t val)
-{
- xen_ulong_t oldval;
- unsigned int tmp;
-
- wmb();
- asm volatile("@ xchg_xen_ulong\n"
- "1: ldrexd %0, %H0, [%3]\n"
- " strexd %1, %2, %H2, [%3]\n"
- " teq %1, #0\n"
- " bne 1b"
- : "=&r" (oldval), "=&r" (tmp)
- : "r" (val), "r" (ptr)
- : "memory", "cc");
- return oldval;
-}
+#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr), \
+ atomic64_t, \
+ counter), (val))
#endif /* _ASM_ARM_XEN_EVENTS_H */
-/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S
- *
+/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
/* pull in the relevant register and map files. */
-#include <mach/map.h>
+#define S3C_ADDR_BASE 0xF6000000
+#define S3C_VA_UART S3C_ADDR_BASE + 0x01000000
+#define EXYNOS4_PA_UART 0x13800000
+#define EXYNOS5_PA_UART 0x12C00000
/* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1
#define fifo_full fifo_full_s5pv210
#define fifo_level fifo_level_s5pv210
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>
@ Fall-through from Thumb-2 __und_usr
@
#ifdef CONFIG_NEON
+ get_thread_info r10 @ get current thread
adr r6, .LCneon_thumb_opcodes
b 2f
#endif
call_fpe:
+ get_thread_info r10 @ get current thread
#ifdef CONFIG_NEON
adr r6, .LCneon_arm_opcodes
-2:
- ldr r7, [r6], #4 @ mask value
- cmp r7, #0 @ end mask?
- beq 1f
- and r8, r0, r7
+2: ldr r5, [r6], #4 @ mask value
ldr r7, [r6], #4 @ opcode bits matching in mask
+ cmp r5, #0 @ end mask?
+ beq 1f
+ and r8, r0, r5
cmp r8, r7 @ NEON instruction?
bne 2b
- get_thread_info r10
mov r7, #1
strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used
strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used
tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27
tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2
moveq pc, lr
- get_thread_info r10 @ get current thread
and r8, r0, #0x00000f00 @ mask out CP number
THUMB( lsr r8, r8, #8 )
mov r7, #1
*/
.macro mcount_enter
+/*
+ * This pad compensates for the push {lr} at the call site. Note that we are
+ * unable to unwind through a function which does not otherwise save its lr.
+ */
+ UNWIND(.pad #4)
stmdb sp!, {r0-r3, lr}
+ UNWIND(.save {r0-r3, lr})
.endm
.macro mcount_get_lr reg
.endm
ENTRY(__gnu_mcount_nc)
+UNWIND(.fnstart)
#ifdef CONFIG_DYNAMIC_FTRACE
mov ip, lr
ldmia sp!, {lr}
#else
__mcount
#endif
+UNWIND(.fnend)
ENDPROC(__gnu_mcount_nc)
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(ftrace_caller)
+UNWIND(.fnstart)
__ftrace_caller
+UNWIND(.fnend)
ENDPROC(ftrace_caller)
#endif
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
ENTRY(ftrace_graph_caller)
+UNWIND(.fnstart)
__ftrace_graph_caller
+UNWIND(.fnend)
ENDPROC(ftrace_graph_caller)
#endif
addne r6, r6, #1 << SECTION_SHIFT
strne r6, [r3]
-#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
+#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
sub r4, r4, #4 @ Fixup page table pointer
@ for 64-bit descriptors
#endif
}
if (err) {
- pr_warning("CPU %d debug is powered down!\n", cpu);
+ pr_warn_once("CPU %d debug is powered down!\n", cpu);
cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
return;
}
isb();
if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
- pr_warning("CPU %d failed to disable vector catch\n", cpu);
+ pr_warn_once("CPU %d failed to disable vector catch\n", cpu);
return;
}
}
if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
- pr_warning("CPU %d failed to clear debug register pairs\n", cpu);
+ pr_warn_once("CPU %d failed to clear debug register pairs\n", cpu);
return;
}
* atomic helpers and the signal restart code. Insert it into the
* gate_vma so that it is visible through ptrace and /proc/<pid>/mem.
*/
-static struct vm_area_struct gate_vma;
+static struct vm_area_struct gate_vma = {
+ .vm_start = 0xffff0000,
+ .vm_end = 0xffff0000 + PAGE_SIZE,
+ .vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC,
+ .vm_mm = &init_mm,
+};
static int __init gate_vma_init(void)
{
- gate_vma.vm_start = 0xffff0000;
- gate_vma.vm_end = 0xffff0000 + PAGE_SIZE;
- gate_vma.vm_page_prot = PAGE_READONLY_EXEC;
- gate_vma.vm_flags = VM_READ | VM_EXEC |
- VM_MAYREAD | VM_MAYEXEC;
+ gate_vma.vm_page_prot = PAGE_READONLY_EXEC;
return 0;
}
arch_initcall(gate_vma_init);
printk("%s", buf);
}
+static void __init cpuid_init_hwcaps(void)
+{
+ unsigned int divide_instrs;
+
+ if (cpu_architecture() < CPU_ARCH_ARMv7)
+ return;
+
+ divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24;
+
+ switch (divide_instrs) {
+ case 2:
+ elf_hwcap |= HWCAP_IDIVA;
+ case 1:
+ elf_hwcap |= HWCAP_IDIVT;
+ }
+}
+
static void __init feat_v6_fixup(void)
{
int id = read_cpuid_id();
snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
list->elf_name, ENDIANNESS);
elf_hwcap = list->elf_hwcap;
+
+ cpuid_init_hwcaps();
+
#ifndef CONFIG_ARM_THUMB
- elf_hwcap &= ~HWCAP_THUMB;
+ elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
#endif
feat_v6_fixup();
size -= start & ~PAGE_MASK;
bank->start = PAGE_ALIGN(start);
-#ifndef CONFIG_LPAE
+#ifndef CONFIG_ARM_LPAE
if (bank->start + size < bank->start) {
printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
"32-bit physical address space\n", (long long)start);
evt->features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_DUMMY;
- evt->rating = 400;
+ evt->rating = 100;
evt->mult = 1;
evt->set_mode = broadcast_timer_set_mode;
if (freq->flags & CPUFREQ_CONST_LOOPS)
return NOTIFY_OK;
- if (arm_delay_ops.const_clock)
- return NOTIFY_OK;
-
if (!per_cpu(l_p_j_ref, cpu)) {
per_cpu(l_p_j_ref, cpu) =
per_cpu(cpu_data, cpu).loops_per_jiffy;
#include <asm/smp_plat.h>
#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
/**********************************************************************/
local_flush_bp_all();
}
+#ifdef CONFIG_ARM_ERRATA_798181
+static int erratum_a15_798181(void)
+{
+ unsigned int midr = read_cpuid_id();
+
+ /* Cortex-A15 r0p0..r3p2 affected */
+ if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
+ return 0;
+ return 1;
+}
+#else
+static int erratum_a15_798181(void)
+{
+ return 0;
+}
+#endif
+
+static void ipi_flush_tlb_a15_erratum(void *arg)
+{
+ dmb();
+}
+
+static void broadcast_tlb_a15_erratum(void)
+{
+ if (!erratum_a15_798181())
+ return;
+
+ dummy_flush_tlb_a15_erratum();
+ smp_call_function_many(cpu_online_mask, ipi_flush_tlb_a15_erratum,
+ NULL, 1);
+}
+
+static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
+{
+ int cpu;
+ cpumask_t mask = { CPU_BITS_NONE };
+
+ if (!erratum_a15_798181())
+ return;
+
+ dummy_flush_tlb_a15_erratum();
+ for_each_online_cpu(cpu) {
+ if (cpu == smp_processor_id())
+ continue;
+ /*
+ * We only need to send an IPI if the other CPUs are running
+ * the same ASID as the one being invalidated. There is no
+ * need for locking around the active_asids check since the
+ * switch_mm() function has at least one dmb() (as required by
+ * this workaround) in case a context switch happens on
+ * another CPU after the condition below.
+ */
+ if (atomic64_read(&mm->context.id) ==
+ atomic64_read(&per_cpu(active_asids, cpu)))
+ cpumask_set_cpu(cpu, &mask);
+ }
+ smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
+}
+
void flush_tlb_all(void)
{
if (tlb_ops_need_broadcast())
on_each_cpu(ipi_flush_tlb_all, NULL, 1);
else
local_flush_tlb_all();
+ broadcast_tlb_a15_erratum();
}
void flush_tlb_mm(struct mm_struct *mm)
on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1);
else
local_flush_tlb_mm(mm);
+ broadcast_tlb_mm_a15_erratum(mm);
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
&ta, 1);
} else
local_flush_tlb_page(vma, uaddr);
+ broadcast_tlb_mm_a15_erratum(vma->vm_mm);
}
void flush_tlb_kernel_page(unsigned long kaddr)
on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
} else
local_flush_tlb_kernel_page(kaddr);
+ broadcast_tlb_a15_erratum();
}
void flush_tlb_range(struct vm_area_struct *vma,
&ta, 1);
} else
local_flush_tlb_range(vma, start, end);
+ broadcast_tlb_mm_a15_erratum(vma->vm_mm);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
} else
local_flush_tlb_kernel_range(start, end);
+ broadcast_tlb_a15_erratum();
}
void flush_bp_all(void)
lr, irq, vgic_cpu->vgic_lr[lr]);
BUG_ON(!test_bit(lr, vgic_cpu->lr_used));
vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT;
-
- goto out;
+ return true;
}
/* Try to use another LR for this interrupt */
vgic_cpu->vgic_irq_lr_map[irq] = lr;
set_bit(lr, vgic_cpu->lr_used);
-out:
if (!vgic_irq_is_edge(vcpu, irq))
vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI;
kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr);
- /*
- * We do not need to take the distributor lock here, since the only
- * action we perform is clearing the irq_active_bit for an EOIed
- * level interrupt. There is a potential race with
- * the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we
- * check if the interrupt is already active. Two possibilities:
- *
- * - The queuing is occurring on the same vcpu: cannot happen,
- * as we're already in the context of this vcpu, and
- * executing the handler
- * - The interrupt has been migrated to another vcpu, and we
- * ignore this interrupt for this run. Big deal. It is still
- * pending though, and will get considered when this vcpu
- * exits.
- */
if (vgic_cpu->vgic_misr & GICH_MISR_EOI) {
/*
* Some level interrupts have been EOIed. Clear their
} else {
vgic_cpu_irq_clear(vcpu, irq);
}
+
+ /*
+ * Despite being EOIed, the LR may not have
+ * been marked as empty.
+ */
+ set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr);
+ vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT;
}
}
}
/*
- * Sync back the VGIC state after a guest run. We do not really touch
- * the distributor here (the irq_pending_on_cpu bit is safe to set),
- * so there is no need for taking its lock.
+ * Sync back the VGIC state after a guest run. The distributor lock is
+ * needed so we don't get preempted in the middle of the state processing.
*/
static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
{
void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
{
+ struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+
if (!irqchip_in_kernel(vcpu->kvm))
return;
+ spin_lock(&dist->lock);
__kvm_vgic_sync_hwstate(vcpu);
+ spin_unlock(&dist->lock);
}
int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu)
static void __timer_const_udelay(unsigned long xloops)
{
unsigned long long loops = xloops;
- loops *= loops_per_jiffy;
+ loops *= arm_delay_ops.ticks_per_jiffy;
__timer_delay(loops >> UDELAY_SHIFT);
}
pr_info("Switching to timer-based delay loop\n");
delay_timer = timer;
lpj_fine = timer->freq / HZ;
- loops_per_jiffy = lpj_fine;
+
+ /* cpufreq may scale loops_per_jiffy, so keep a private copy */
+ arm_delay_ops.ticks_per_jiffy = lpj_fine;
arm_delay_ops.delay = __timer_delay;
arm_delay_ops.const_udelay = __timer_const_udelay;
arm_delay_ops.udelay = __timer_udelay;
- arm_delay_ops.const_clock = true;
+
delay_calibrated = true;
} else {
pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");
.text
.align 5
- .word 0
-
-1: subs r2, r2, #4 @ 1 do we have enough
- blt 5f @ 1 bytes to align with?
- cmp r3, #2 @ 1
- strltb r1, [ip], #1 @ 1
- strleb r1, [ip], #1 @ 1
- strb r1, [ip], #1 @ 1
- add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted. Try doing the
- * memset again.
- */
ENTRY(memset)
-/*
- * Preserve the contents of r0 for the return value.
- */
- mov ip, r0
- ands r3, ip, #3 @ 1 unaligned?
- bne 1b @ 1
+ ands r3, r0, #3 @ 1 unaligned?
+ mov ip, r0 @ preserve r0 as return value
+ bne 6f @ 1
/*
* we know that the pointer in ip is aligned to a word boundary.
*/
- orr r1, r1, r1, lsl #8
+1: orr r1, r1, r1, lsl #8
orr r1, r1, r1, lsl #16
mov r3, r1
cmp r2, #16
tst r2, #1
strneb r1, [ip], #1
mov pc, lr
+
+6: subs r2, r2, #4 @ 1 do we have enough
+ blt 5b @ 1 bytes to align with?
+ cmp r3, #2 @ 1
+ strltb r1, [ip], #1 @ 1
+ strleb r1, [ip], #1 @ 1
+ strb r1, [ip], #1 @ 1
+ add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
+ b 1b
ENDPROC(memset)
};
static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9261-lcdfb.0", &hck1),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9g10-lcdfb.0", &hck1),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
};
static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
return;
}
+ if (cpu_is_at91sam9g10())
+ at91_lcdc_device.name = "at91sam9g10-lcdfb";
+ else
+ at91_lcdc_device.name = "at91sam9261-lcdfb";
+
#if defined(CONFIG_FB_ATMEL_STN)
at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */
at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9263-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
};
static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
+ .name = "at91sam9263-lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
CLKDEV_CON_ID("hclk", &macb_clk),
/* One additional fake clock for ohci */
CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
};
static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
if (!data)
return;
+ if (cpu_is_at91sam9g45es())
+ at91_lcdc_device.name = "at91sam9g45es-lcdfb";
+ else
+ at91_lcdc_device.name = "at91sam9g45-lcdfb";
+
at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
};
static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
};
static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
+ .name = "at91sam9rl-lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
/* If you choose to use a pin other than PB16 it needs to be 3.3V */
.pin = AT91_PIN_PB16,
.is_open_drain = 1,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {
static struct w1_gpio_platform_data w1_gpio_pdata = {
.pin = AT91_PIN_PA29,
.is_open_drain = 1,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {
extern void at91_gpio_suspend(void);
extern void at91_gpio_resume(void);
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+
#endif /* __ASSEMBLY__ */
#endif
void at91_irq_suspend(void)
{
- int i = 0, bit;
+ int bit = -1;
if (has_aic5()) {
/* disable enabled irqs */
- while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+ while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IDCR, 1);
- i = bit;
}
/* enable wakeup irqs */
- i = 0;
- while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+ bit = -1;
+ while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IECR, 1);
- i = bit;
}
} else {
at91_aic_write(AT91_AIC_IDCR, *backups);
void at91_irq_resume(void)
{
- int i = 0, bit;
+ int bit = -1;
if (has_aic5()) {
/* disable wakeup irqs */
- while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+ while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IDCR, 1);
- i = bit;
}
/* enable irqs disabled for suspend */
- i = 0;
- while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+ bit = -1;
+ while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IECR, 1);
- i = bit;
}
} else {
at91_aic_write(AT91_AIC_IDCR, *wakeups);
static int at91_pm_enter(suspend_state_t state)
{
- at91_gpio_suspend();
+ if (of_have_populated_dt())
+ at91_pinctrl_gpio_suspend();
+ else
+ at91_gpio_suspend();
at91_irq_suspend();
pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
error:
target_state = PM_SUSPEND_ON;
at91_irq_resume();
- at91_gpio_resume();
+ if (of_have_populated_dt())
+ at91_pinctrl_gpio_resume();
+ else
+ at91_gpio_resume();
return 0;
}
static struct map_desc cns3xxx_io_desc[] __initdata = {
{
- .virtual = CNS3XXX_TC11MP_TWD_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
- .length = SZ_4K,
+ .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT,
+ .pfn = __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
+ .length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT,
#define RTC_INTR_STS_OFFSET 0x34
#define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT 0xFB000000 /* Misc Control */
#define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT 0xFFF08000
+#define CNS3XXX_PM_BASE_VIRT 0xFB001000
#define PM_CLK_GATE_OFFSET 0x00
#define PM_SOFT_RST_OFFSET 0x04
#define PM_PLL_HM_PD_OFFSET 0x1C
#define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000
+#define CNS3XXX_UART0_BASE_VIRT 0xFB002000
#define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */
#define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000
#define CNS3XXX_I2S_BASE_VIRT 0xFFF10000
#define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFB003000
#define TIMER1_COUNTER_OFFSET 0x00
#define TIMER1_AUTO_RELOAD_OFFSET 0x04
* Testchip peripheral and fpga gic regions
*/
#define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFB004000
#define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
#define CNS3XXX_TC11MP_TWD_BASE 0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
#define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
#define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */
#define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000
*/
int edma_alloc_slot(unsigned ctlr, int slot)
{
+ if (!edma_cc[ctlr])
+ return -EINVAL;
+
if (slot >= 0)
slot = EDMA_CHAN_SLOT(slot);
static inline void putc(int c)
{
- /* Transmit fifo not full? */
- while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
- ;
+ int i;
+
+ for (i = 0; i < 10000; i++) {
+ /* Transmit fifo not full? */
+ if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
+ break;
+ }
__raw_writeb(c, PHYS_UART_DATA);
}
# Configuration options for the EXYNOS4
+config ARCH_EXYNOS
+ # TODO: make this visible after all drivers are converted
+ bool "Samsung EXYNOS" if ARCH_MULTI_V7 && BROKEN
+ default ARCH_EXYNOS_SINGLE
+ select ARCH_HAS_CPUFREQ
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C_RTC if RTC_CLASS
+ help
+ Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
+
if ARCH_EXYNOS
menu "SAMSUNG EXYNOS SoCs Support"
help
Samsung EXYNOS4 SoCs based systems
+config ARCH_EXYNOS4_SINGLE
+ def_bool ARCH_EXYNOS4 && ARCH_EXYNOS_SINGLE
+
config ARCH_EXYNOS5
bool "SAMSUNG EXYNOS5"
select HAVE_SMP
select PM_GENERIC_DOMAINS
select S5P_PM if PM
select S5P_SLEEP if PM
- select SAMSUNG_DMADEV
+ select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE
help
Enable EXYNOS4210 CPU support
depends on ARCH_EXYNOS4
select S5P_PM if PM
select S5P_SLEEP if PM
- select SAMSUNG_DMADEV
+ select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE
help
Enable EXYNOS4212 SoC support
bool "SAMSUNG EXYNOS4412"
default y
depends on ARCH_EXYNOS4
- select SAMSUNG_DMADEV
+ select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE
help
Enable EXYNOS4412 SoC support
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
+ select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select S5P_DEV_MFC
- select SAMSUNG_DMADEV
+ select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE
help
Enable EXYNOS5250 SoC support
help
Enable EXYNOS5440 SoC support
-config EXYNOS4_MCT
- bool
+config EXYNOS_ATAGS
+ bool "ATAGS based boot for EXYNOS (deprecated)"
+ depends on !ARCH_MULTIPLATFORM
+ depends on ATAGS
default y
help
- Use MCT (Multi Core Timer) as kernel timers
+ The EXYNOS platform is moving towards being completely probed
+ through device tree. This enables support for board files using
+ the traditional ATAGS boot format.
+ Note that this option is not available for multiplatform builds.
+
+if EXYNOS_ATAGS
config EXYNOS_DEV_DMA
bool
select S5P_DEV_ONENAND
select S5P_DEV_TV
select S5P_GPIO_INT
- select S5P_HRT
select S5P_SETUP_MIPIPHY
+ select SAMSUNG_HRT
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
Machine support for Samsung SMDK4412
endif
+endif
+
comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
depends on ARCH_EXYNOS4
select ARM_AMBA
+ select CLKSRC_OF
select CPU_EXYNOS4210
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS
+ select S5P_DEV_MFC
select USE_OF
help
Machine support for Samsung Exynos4 machine with device tree enabled.
default y
depends on ARCH_EXYNOS5
select ARM_AMBA
+ select CLKSRC_OF
select USE_OF
help
Machine support for Samsung EXYNOS5 machine with device tree enabled.
# http://www.samsung.com/
#
# Licensed under GPLv2
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
obj-y :=
obj-m :=
# Core
obj-$(CONFIG_ARCH_EXYNOS) += common.o
-obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o
-obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
-obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
-obj-$(CONFIG_SOC_EXYNOS5250) += clock-exynos5.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-obj-$(CONFIG_EXYNOS4_MCT) += mct.o
-
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
# machine support
# device support
obj-y += dev-uart.o
-obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
+obj-$(CONFIG_ARCH_EXYNOS4_SINGLE) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
-obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
+obj-$(CONFIG_ARCH_EXYNOS_SINGLE) += setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
+++ /dev/null
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4_clock_save[] = {
- SAVE_ITEM(EXYNOS4_CLKDIV_LEFTBUS),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_LEFTBUS),
- SAVE_ITEM(EXYNOS4_CLKDIV_RIGHTBUS),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_RIGHTBUS),
- SAVE_ITEM(EXYNOS4_CLKSRC_TOP0),
- SAVE_ITEM(EXYNOS4_CLKSRC_TOP1),
- SAVE_ITEM(EXYNOS4_CLKSRC_CAM),
- SAVE_ITEM(EXYNOS4_CLKSRC_TV),
- SAVE_ITEM(EXYNOS4_CLKSRC_MFC),
- SAVE_ITEM(EXYNOS4_CLKSRC_G3D),
- SAVE_ITEM(EXYNOS4_CLKSRC_LCD0),
- SAVE_ITEM(EXYNOS4_CLKSRC_MAUDIO),
- SAVE_ITEM(EXYNOS4_CLKSRC_FSYS),
- SAVE_ITEM(EXYNOS4_CLKSRC_PERIL0),
- SAVE_ITEM(EXYNOS4_CLKSRC_PERIL1),
- SAVE_ITEM(EXYNOS4_CLKDIV_CAM),
- SAVE_ITEM(EXYNOS4_CLKDIV_TV),
- SAVE_ITEM(EXYNOS4_CLKDIV_MFC),
- SAVE_ITEM(EXYNOS4_CLKDIV_G3D),
- SAVE_ITEM(EXYNOS4_CLKDIV_LCD0),
- SAVE_ITEM(EXYNOS4_CLKDIV_MAUDIO),
- SAVE_ITEM(EXYNOS4_CLKDIV_FSYS0),
- SAVE_ITEM(EXYNOS4_CLKDIV_FSYS1),
- SAVE_ITEM(EXYNOS4_CLKDIV_FSYS2),
- SAVE_ITEM(EXYNOS4_CLKDIV_FSYS3),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL0),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL1),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL2),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL3),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL4),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL5),
- SAVE_ITEM(EXYNOS4_CLKDIV_TOP),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TOP),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_CAM),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TV),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_LCD0),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_FSYS),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL0),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL1),
- SAVE_ITEM(EXYNOS4_CLKDIV2_RATIO),
- SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCAM),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_CAM),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_TV),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_MFC),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_G3D),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_LCD0),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_FSYS),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_GPS),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_PERIL),
- SAVE_ITEM(EXYNOS4_CLKGATE_BLOCK),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_DMC),
- SAVE_ITEM(EXYNOS4_CLKSRC_DMC),
- SAVE_ITEM(EXYNOS4_CLKDIV_DMC0),
- SAVE_ITEM(EXYNOS4_CLKDIV_DMC1),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_DMC),
- SAVE_ITEM(EXYNOS4_CLKSRC_CPU),
- SAVE_ITEM(EXYNOS4_CLKDIV_CPU),
- SAVE_ITEM(EXYNOS4_CLKDIV_CPU + 0x4),
- SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCPU),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_CPU),
-};
-#endif
-
-static struct clk exynos4_clk_sclk_hdmi27m = {
- .name = "sclk_hdmi27m",
- .rate = 27000000,
-};
-
-static struct clk exynos4_clk_sclk_hdmiphy = {
- .name = "sclk_hdmiphy",
-};
-
-static struct clk exynos4_clk_sclk_usbphy0 = {
- .name = "sclk_usbphy0",
- .rate = 27000000,
-};
-
-static struct clk exynos4_clk_sclk_usbphy1 = {
- .name = "sclk_usbphy1",
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_CAM, clk, enable);
-}
-
-static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_LCD0, clk, enable);
-}
-
-int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL0, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL1, clk, enable);
-}
-
-static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TV, clk, enable);
-}
-
-static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_CAM, clk, enable);
-}
-
-static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable);
-}
-
-int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable);
-}
-
-static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_LCD0, clk, enable);
-}
-
-int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4210_CLKGATE_IP_LCD1, clk, enable);
-}
-
-int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIL, clk, enable);
-}
-
-static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable);
-}
-
-int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_DMC, clk, enable);
-}
-
-static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
-}
-
-static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk exynos4_clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_apll = {
- .clk = {
- .name = "sclk_apll",
- .parent = &exynos4_clk_mout_apll.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 4, .size = 1 },
-};
-
-struct clksrc_clk exynos4_clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .sources = &clk_src_mpll,
-
- /* reg_src will be added in each SoCs' clock */
-};
-
-static struct clk *exynos4_clkset_moutcore_list[] = {
- [0] = &exynos4_clk_mout_apll.clk,
- [1] = &exynos4_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_moutcore = {
- .sources = exynos4_clkset_moutcore_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_moutcore_list),
-};
-
-static struct clksrc_clk exynos4_clk_moutcore = {
- .clk = {
- .name = "moutcore",
- },
- .sources = &exynos4_clkset_moutcore,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_coreclk = {
- .clk = {
- .name = "core_clk",
- .parent = &exynos4_clk_moutcore.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_armclk = {
- .clk = {
- .name = "armclk",
- .parent = &exynos4_clk_coreclk.clk,
- },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corem0 = {
- .clk = {
- .name = "aclk_corem0",
- .parent = &exynos4_clk_coreclk.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_cores = {
- .clk = {
- .name = "aclk_cores",
- .parent = &exynos4_clk_coreclk.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corem1 = {
- .clk = {
- .name = "aclk_corem1",
- .parent = &exynos4_clk_coreclk.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_periphclk = {
- .clk = {
- .name = "periphclk",
- .parent = &exynos4_clk_coreclk.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 12, .size = 3 },
-};
-
-/* Core list of CMU_CORE side */
-
-static struct clk *exynos4_clkset_corebus_list[] = {
- [0] = &exynos4_clk_mout_mpll.clk,
- [1] = &exynos4_clk_sclk_apll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_corebus = {
- .sources = exynos4_clkset_corebus_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_corebus_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_corebus = {
- .clk = {
- .name = "mout_corebus",
- },
- .sources = &exynos4_clkset_mout_corebus,
- .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_dmc = {
- .clk = {
- .name = "sclk_dmc",
- .parent = &exynos4_clk_mout_corebus.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_cored = {
- .clk = {
- .name = "aclk_cored",
- .parent = &exynos4_clk_sclk_dmc.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corep = {
- .clk = {
- .name = "aclk_corep",
- .parent = &exynos4_clk_aclk_cored.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_acp = {
- .clk = {
- .name = "aclk_acp",
- .parent = &exynos4_clk_mout_corebus.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_pclk_acp = {
- .clk = {
- .name = "pclk_acp",
- .parent = &exynos4_clk_aclk_acp.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-struct clk *exynos4_clkset_aclk_top_list[] = {
- [0] = &exynos4_clk_mout_mpll.clk,
- [1] = &exynos4_clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_aclk = {
- .sources = exynos4_clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_aclk_top_list),
-};
-
-static struct clksrc_clk exynos4_clk_aclk_200 = {
- .clk = {
- .name = "aclk_200",
- },
- .sources = &exynos4_clkset_aclk,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 12, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_100 = {
- .clk = {
- .name = "aclk_100",
- },
- .sources = &exynos4_clkset_aclk,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 16, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_160 = {
- .clk = {
- .name = "aclk_160",
- },
- .sources = &exynos4_clkset_aclk,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 20, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 8, .size = 3 },
-};
-
-struct clksrc_clk exynos4_clk_aclk_133 = {
- .clk = {
- .name = "aclk_133",
- },
- .sources = &exynos4_clkset_aclk,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 24, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 12, .size = 3 },
-};
-
-static struct clk *exynos4_clkset_vpllsrc_list[] = {
- [0] = &clk_fin_vpll,
- [1] = &exynos4_clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources exynos4_clkset_vpllsrc = {
- .sources = exynos4_clkset_vpllsrc_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk exynos4_clk_vpllsrc = {
- .clk = {
- .name = "vpll_src",
- .enable = exynos4_clksrc_mask_top_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_vpllsrc,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP1, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_sclk_vpll_list[] = {
- [0] = &exynos4_clk_vpllsrc.clk,
- [1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_vpll = {
- .sources = exynos4_clkset_sclk_vpll_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_vpll_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_vpll = {
- .clk = {
- .name = "sclk_vpll",
- },
- .sources = &exynos4_clkset_sclk_vpll,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 8, .size = 1 },
-};
-
-static struct clk exynos4_init_clocks_off[] = {
- {
- .name = "timers",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1<<24),
- }, {
- .name = "csis",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "csis",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "jpeg",
- .id = 0,
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.2",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "tsi",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "hsmmc",
- .devname = "exynos4-sdhci.0",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "hsmmc",
- .devname = "exynos4-sdhci.1",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "hsmmc",
- .devname = "exynos4-sdhci.2",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "hsmmc",
- .devname = "exynos4-sdhci.3",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "biu",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "onenand",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "nfcon",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "dac",
- .devname = "s5p-sdo",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "mixer",
- .devname = "s5p-mixer",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "vp",
- .devname = "s5p-mixer",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "hdmi",
- .devname = "exynos4-hdmi",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "hdmiphy",
- .devname = "exynos4-hdmi",
- .enable = exynos4_clk_hdmiphy_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "dacphy",
- .devname = "s5p-sdo",
- .enable = exynos4_clk_dac_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "adc",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "tmu_apbif",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "keypad",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "rtc",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "watchdog",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "usbhost",
- .enable = exynos4_clk_ip_fsys_ctrl ,
- .ctrlbit = (1 << 12),
- }, {
- .name = "otg",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 23),
- }, {
- .name = "slimbus",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 25),
- }, {
- .name = "spdif",
- .devname = "samsung-spdif",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 26),
- }, {
- .name = "ac97",
- .devname = "samsung-ac97",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "mfc",
- .devname = "s5p-mfc",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.2",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.3",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.4",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.5",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.6",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.7",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "i2c",
- .devname = "s3c2440-hdmiphy-i2c",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.0",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.1",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.2",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.4",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.5",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.6",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.7",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.8",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.10",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 4),
- }
-};
-
-static struct clk exynos4_init_clocks_on[] = {
- {
- .name = "uart",
- .devname = "s5pv210-uart.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.3",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.4",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.5",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 5),
- }
-};
-
-static struct clk exynos4_clk_pdma0 = {
- .name = "dma",
- .devname = "dma-pl330.0",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-static struct clk exynos4_clk_pdma1 = {
- .name = "dma",
- .devname = "dma-pl330.1",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 1),
-};
-
-static struct clk exynos4_clk_mdma1 = {
- .name = "dma",
- .devname = "dma-pl330.2",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = ((1 << 8) | (1 << 5) | (1 << 2)),
-};
-
-static struct clk exynos4_clk_fimd0 = {
- .name = "fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-struct clk *exynos4_clkset_group_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = &clk_xusbxti,
- [2] = &exynos4_clk_sclk_hdmi27m,
- [3] = &exynos4_clk_sclk_usbphy0,
- [4] = &exynos4_clk_sclk_usbphy1,
- [5] = &exynos4_clk_sclk_hdmiphy,
- [6] = &exynos4_clk_mout_mpll.clk,
- [7] = &exynos4_clk_mout_epll.clk,
- [8] = &exynos4_clk_sclk_vpll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_group = {
- .sources = exynos4_clkset_group_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_group_list),
-};
-
-static struct clk *exynos4_clkset_mout_g2d0_list[] = {
- [0] = &exynos4_clk_mout_mpll.clk,
- [1] = &exynos4_clk_sclk_apll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_g2d0 = {
- .sources = exynos4_clkset_mout_g2d0_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d0_list),
-};
-
-static struct clk *exynos4_clkset_mout_g2d1_list[] = {
- [0] = &exynos4_clk_mout_epll.clk,
- [1] = &exynos4_clk_sclk_vpll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_g2d1 = {
- .sources = exynos4_clkset_mout_g2d1_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d1_list),
-};
-
-static struct clk *exynos4_clkset_mout_mfc0_list[] = {
- [0] = &exynos4_clk_mout_mpll.clk,
- [1] = &exynos4_clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc0 = {
- .sources = exynos4_clkset_mout_mfc0_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc0_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_mfc0 = {
- .clk = {
- .name = "mout_mfc0",
- },
- .sources = &exynos4_clkset_mout_mfc0,
- .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_mfc1_list[] = {
- [0] = &exynos4_clk_mout_epll.clk,
- [1] = &exynos4_clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc1 = {
- .sources = exynos4_clkset_mout_mfc1_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc1_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_mfc1 = {
- .clk = {
- .name = "mout_mfc1",
- },
- .sources = &exynos4_clkset_mout_mfc1,
- .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_mfc_list[] = {
- [0] = &exynos4_clk_mout_mfc0.clk,
- [1] = &exynos4_clk_mout_mfc1.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc = {
- .sources = exynos4_clkset_mout_mfc_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc_list),
-};
-
-static struct clk *exynos4_clkset_sclk_dac_list[] = {
- [0] = &exynos4_clk_sclk_vpll.clk,
- [1] = &exynos4_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_dac = {
- .sources = exynos4_clkset_sclk_dac_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_dac_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_dac = {
- .clk = {
- .name = "sclk_dac",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &exynos4_clkset_sclk_dac,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_pixel = {
- .clk = {
- .name = "sclk_pixel",
- .parent = &exynos4_clk_sclk_vpll.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TV, .shift = 0, .size = 4 },
-};
-
-static struct clk *exynos4_clkset_sclk_hdmi_list[] = {
- [0] = &exynos4_clk_sclk_pixel.clk,
- [1] = &exynos4_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_hdmi = {
- .sources = exynos4_clkset_sclk_hdmi_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_hdmi = {
- .clk = {
- .name = "sclk_hdmi",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_sclk_hdmi,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_sclk_mixer_list[] = {
- [0] = &exynos4_clk_sclk_dac.clk,
- [1] = &exynos4_clk_sclk_hdmi.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_mixer = {
- .sources = exynos4_clkset_sclk_mixer_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_mixer_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mixer = {
- .clk = {
- .name = "sclk_mixer",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &exynos4_clkset_sclk_mixer,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk *exynos4_sclk_tv[] = {
- &exynos4_clk_sclk_dac,
- &exynos4_clk_sclk_pixel,
- &exynos4_clk_sclk_hdmi,
- &exynos4_clk_sclk_mixer,
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc0 = {
- .clk = {
- .name = "dout_mmc0",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc1 = {
- .clk = {
- .name = "dout_mmc1",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc2 = {
- .clk = {
- .name = "dout_mmc2",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc3 = {
- .clk = {
- .name = "dout_mmc3",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc4 = {
- .clk = {
- .name = "dout_mmc4",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clksrcs[] = {
- {
- .clk = {
- .name = "sclk_pwm",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL3, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_csis",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_csis",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 28),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 28, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 28, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 20, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.2",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.3",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clksrc_mask_lcd0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_LCD0, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mfc",
- .devname = "s5p-mfc",
- },
- .sources = &exynos4_clkset_mout_mfc,
- .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 8, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_MFC, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "ciu",
- .parent = &exynos4_clk_dout_mmc4.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 16),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 8, .size = 8 },
- }
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart0 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.0",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart1 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.1",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart2 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.2",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart3 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.3",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "exynos4-sdhci.0",
- .parent = &exynos4_clk_dout_mmc0.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 0),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "exynos4-sdhci.1",
- .parent = &exynos4_clk_dout_mmc1.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 4),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "exynos4-sdhci.2",
- .parent = &exynos4_clk_dout_mmc2.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 8),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "exynos4-sdhci.3",
- .parent = &exynos4_clk_dout_mmc3.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 12),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_mdout_spi0 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.0",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_mdout_spi1 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.1",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_mdout_spi2 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.2",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.0",
- .parent = &exynos4_clk_mdout_spi0.clk,
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 16),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.1",
- .parent = &exynos4_clk_mdout_spi1.clk,
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 20),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi2 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.2",
- .parent = &exynos4_clk_mdout_spi2.clk,
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 24),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 8, .size = 8 },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *exynos4_sysclks[] = {
- &exynos4_clk_mout_apll,
- &exynos4_clk_sclk_apll,
- &exynos4_clk_mout_epll,
- &exynos4_clk_mout_mpll,
- &exynos4_clk_moutcore,
- &exynos4_clk_coreclk,
- &exynos4_clk_armclk,
- &exynos4_clk_aclk_corem0,
- &exynos4_clk_aclk_cores,
- &exynos4_clk_aclk_corem1,
- &exynos4_clk_periphclk,
- &exynos4_clk_mout_corebus,
- &exynos4_clk_sclk_dmc,
- &exynos4_clk_aclk_cored,
- &exynos4_clk_aclk_corep,
- &exynos4_clk_aclk_acp,
- &exynos4_clk_pclk_acp,
- &exynos4_clk_vpllsrc,
- &exynos4_clk_sclk_vpll,
- &exynos4_clk_aclk_200,
- &exynos4_clk_aclk_100,
- &exynos4_clk_aclk_160,
- &exynos4_clk_aclk_133,
- &exynos4_clk_dout_mmc0,
- &exynos4_clk_dout_mmc1,
- &exynos4_clk_dout_mmc2,
- &exynos4_clk_dout_mmc3,
- &exynos4_clk_dout_mmc4,
- &exynos4_clk_mout_mfc0,
- &exynos4_clk_mout_mfc1,
-};
-
-static struct clk *exynos4_clk_cdev[] = {
- &exynos4_clk_pdma0,
- &exynos4_clk_pdma1,
- &exynos4_clk_mdma1,
- &exynos4_clk_fimd0,
-};
-
-static struct clksrc_clk *exynos4_clksrc_cdev[] = {
- &exynos4_clk_sclk_uart0,
- &exynos4_clk_sclk_uart1,
- &exynos4_clk_sclk_uart2,
- &exynos4_clk_sclk_uart3,
- &exynos4_clk_sclk_mmc0,
- &exynos4_clk_sclk_mmc1,
- &exynos4_clk_sclk_mmc2,
- &exynos4_clk_sclk_mmc3,
- &exynos4_clk_sclk_spi0,
- &exynos4_clk_sclk_spi1,
- &exynos4_clk_sclk_spi2,
- &exynos4_clk_mdout_spi0,
- &exynos4_clk_mdout_spi1,
- &exynos4_clk_mdout_spi2,
-};
-
-static struct clk_lookup exynos4_clk_lookup[] = {
- CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos4_clk_sclk_uart0.clk),
- CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
- CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
- CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
- CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
- CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
- CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
- CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
- CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
- CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
- CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
- CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1),
- CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
- CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
- CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
-};
-
-static int xtal_rate;
-
-static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
-{
- if (soc_is_exynos4210())
- return s5p_get_pll45xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0),
- pll_4508);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0));
- else
- return 0;
-}
-
-static struct clk_ops exynos4_fout_apll_ops = {
- .get_rate = exynos4_fout_apll_get_rate,
-};
-
-static u32 exynos4_vpll_div[][8] = {
- { 54000000, 3, 53, 3, 1024, 0, 17, 0 },
- { 108000000, 3, 53, 2, 1024, 0, 17, 0 },
-};
-
-static unsigned long exynos4_vpll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
-static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int vpll_con0, vpll_con1 = 0;
- unsigned int i;
-
- /* Return if nothing changed */
- if (clk->rate == rate)
- return 0;
-
- vpll_con0 = __raw_readl(EXYNOS4_VPLL_CON0);
- vpll_con0 &= ~(0x1 << 27 | \
- PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
- PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
- PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
- vpll_con1 = __raw_readl(EXYNOS4_VPLL_CON1);
- vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \
- PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \
- PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
-
- for (i = 0; i < ARRAY_SIZE(exynos4_vpll_div); i++) {
- if (exynos4_vpll_div[i][0] == rate) {
- vpll_con0 |= exynos4_vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
- vpll_con0 |= exynos4_vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
- vpll_con0 |= exynos4_vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
- vpll_con1 |= exynos4_vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
- vpll_con1 |= exynos4_vpll_div[i][5] << PLL46XX_MFR_SHIFT;
- vpll_con1 |= exynos4_vpll_div[i][6] << PLL46XX_MRR_SHIFT;
- vpll_con0 |= exynos4_vpll_div[i][7] << 27;
- break;
- }
- }
-
- if (i == ARRAY_SIZE(exynos4_vpll_div)) {
- printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
- __func__);
- return -EINVAL;
- }
-
- __raw_writel(vpll_con0, EXYNOS4_VPLL_CON0);
- __raw_writel(vpll_con1, EXYNOS4_VPLL_CON1);
-
- /* Wait for VPLL lock */
- while (!(__raw_readl(EXYNOS4_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
- continue;
-
- clk->rate = rate;
- return 0;
-}
-
-static struct clk_ops exynos4_vpll_ops = {
- .get_rate = exynos4_vpll_get_rate,
- .set_rate = exynos4_vpll_set_rate,
-};
-
-void __init_or_cpufreq exynos4_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long apll = 0;
- unsigned long mpll = 0;
- unsigned long epll = 0;
- unsigned long vpll = 0;
- unsigned long vpllsrc;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long sclk_dmc;
- unsigned long aclk_200;
- unsigned long aclk_100;
- unsigned long aclk_160;
- unsigned long aclk_133;
- unsigned int ptr;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
-
- xtal_rate = xtal;
-
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- if (soc_is_exynos4210()) {
- apll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_APLL_CON0),
- pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0),
- pll_4508);
- epll = s5p_get_pll46xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
- __raw_readl(EXYNOS4_EPLL_CON1), pll_4600);
-
- vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
- vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
- __raw_readl(EXYNOS4_VPLL_CON1), pll_4650c);
- } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
- apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_APLL_CON0));
- mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0));
- epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
- __raw_readl(EXYNOS4_EPLL_CON1));
-
- vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
- vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
- __raw_readl(EXYNOS4_VPLL_CON1));
- } else {
- /* nothing */
- }
-
- clk_fout_apll.ops = &exynos4_fout_apll_ops;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_vpll.ops = &exynos4_vpll_ops;
- clk_fout_vpll.rate = vpll;
-
- printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
- apll, mpll, epll, vpll);
-
- armclk = clk_get_rate(&exynos4_clk_armclk.clk);
- sclk_dmc = clk_get_rate(&exynos4_clk_sclk_dmc.clk);
-
- aclk_200 = clk_get_rate(&exynos4_clk_aclk_200.clk);
- aclk_100 = clk_get_rate(&exynos4_clk_aclk_100.clk);
- aclk_160 = clk_get_rate(&exynos4_clk_aclk_160.clk);
- aclk_133 = clk_get_rate(&exynos4_clk_aclk_133.clk);
-
- printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
- "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
- armclk, sclk_dmc, aclk_200,
- aclk_100, aclk_160, aclk_133);
-
- clk_f.rate = armclk;
- clk_h.rate = sclk_dmc;
- clk_p.rate = aclk_100;
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrcs); ptr++)
- s3c_set_clksrc(&exynos4_clksrcs[ptr], true);
-}
-
-static struct clk *exynos4_clks[] __initdata = {
- &exynos4_clk_sclk_hdmi27m,
- &exynos4_clk_sclk_hdmiphy,
- &exynos4_clk_sclk_usbphy0,
- &exynos4_clk_sclk_usbphy1,
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
- return 0;
-}
-
-static void exynos4_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
-}
-
-#else
-#define exynos4_clock_suspend NULL
-#define exynos4_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4_clock_syscore_ops = {
- .suspend = exynos4_clock_suspend,
- .resume = exynos4_clock_resume,
-};
-
-void __init exynos4_register_clocks(void)
-{
- int ptr;
-
- s3c24xx_register_clocks(exynos4_clks, ARRAY_SIZE(exynos4_clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sysclks); ptr++)
- s3c_register_clksrc(exynos4_sysclks[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sclk_tv); ptr++)
- s3c_register_clksrc(exynos4_sclk_tv[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrc_cdev); ptr++)
- s3c_register_clksrc(exynos4_clksrc_cdev[ptr], 1);
-
- s3c_register_clksrc(exynos4_clksrcs, ARRAY_SIZE(exynos4_clksrcs));
- s3c_register_clocks(exynos4_init_clocks_on, ARRAY_SIZE(exynos4_init_clocks_on));
-
- s3c24xx_register_clocks(exynos4_clk_cdev, ARRAY_SIZE(exynos4_clk_cdev));
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clk_cdev); ptr++)
- s3c_disable_clocks(exynos4_clk_cdev[ptr], 1);
-
- s3c_register_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
- s3c_disable_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
- clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
-
- register_syscore_ops(&exynos4_clock_syscore_ops);
- s3c24xx_register_clock(&dummy_apb_pclk);
-
- s3c_pwmclk_init();
-}
+++ /dev/null
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for exynos4 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clksrc_clk exynos4_clk_aclk_133;
-extern struct clksrc_clk exynos4_clk_mout_mpll;
-
-extern struct clksrc_sources exynos4_clkset_mout_corebus;
-extern struct clksrc_sources exynos4_clkset_group;
-
-extern struct clk *exynos4_clkset_aclk_top_list[];
-extern struct clk *exynos4_clkset_group_list[];
-
-extern struct clksrc_sources exynos4_clkset_mout_g2d0;
-extern struct clksrc_sources exynos4_clkset_mout_g2d1;
-
-extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable);
-
-#endif /* __ASM_ARCH_CLOCK_H */
+++ /dev/null
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4210 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4210_clock_save[] = {
- SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
- SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
- SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1),
- SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1),
- SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1),
- SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE),
- SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1),
- SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR),
-};
-#endif
-
-static struct clksrc_clk *sysclks[] = {
- /* nothing here yet */
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d0 = {
- .clk = {
- .name = "mout_g2d0",
- },
- .sources = &exynos4_clkset_mout_g2d0,
- .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d1 = {
- .clk = {
- .name = "mout_g2d1",
- },
- .sources = &exynos4_clkset_mout_g2d1,
- .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4210_clkset_mout_g2d_list[] = {
- [0] = &exynos4210_clk_mout_g2d0.clk,
- [1] = &exynos4210_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4210_clkset_mout_g2d = {
- .sources = exynos4210_clkset_mout_g2d_list,
- .nr_sources = ARRAY_SIZE(exynos4210_clkset_mout_g2d_list),
-};
-
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_sata",
- .id = -1,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos4_clkset_mout_corebus,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clksrc_mask_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimg2d",
- },
- .sources = &exynos4210_clkset_mout_g2d,
- .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 },
- },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "sataphy",
- .id = -1,
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "sata",
- .id = -1,
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.9",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.11",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "fimg2d",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 0),
- },
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4210_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-
- return 0;
-}
-
-static void exynos4210_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-}
-
-#else
-#define exynos4210_clock_suspend NULL
-#define exynos4210_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4210_clock_syscore_ops = {
- .suspend = exynos4210_clock_suspend,
- .resume = exynos4210_clock_resume,
-};
-
-void __init exynos4210_register_clocks(void)
-{
- int ptr;
-
- exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU;
- exynos4_clk_mout_mpll.reg_src.shift = 8;
- exynos4_clk_mout_mpll.reg_src.size = 1;
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- register_syscore_ops(&exynos4210_clock_syscore_ops);
-}
+++ /dev/null
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4212 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4212_clock_save[] = {
- SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
- SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
- SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE),
- SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR),
-};
-#endif
-
-static int exynos4212_clk_ip_isp0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP0, clk, enable);
-}
-
-static int exynos4212_clk_ip_isp1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP1, clk, enable);
-}
-
-static struct clk *clk_src_mpll_user_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &exynos4_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_mpll_user = {
- .sources = clk_src_mpll_user_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk clk_mout_mpll_user = {
- .clk = {
- .name = "mout_mpll_user",
- },
- .sources = &clk_src_mpll_user,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk exynos4x12_clk_mout_g2d0 = {
- .clk = {
- .name = "mout_g2d0",
- },
- .sources = &exynos4_clkset_mout_g2d0,
- .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 20, .size = 1 },
-};
-
-static struct clksrc_clk exynos4x12_clk_mout_g2d1 = {
- .clk = {
- .name = "mout_g2d1",
- },
- .sources = &exynos4_clkset_mout_g2d1,
- .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 24, .size = 1 },
-};
-
-static struct clk *exynos4x12_clkset_mout_g2d_list[] = {
- [0] = &exynos4x12_clk_mout_g2d0.clk,
- [1] = &exynos4x12_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4x12_clkset_mout_g2d = {
- .sources = exynos4x12_clkset_mout_g2d_list,
- .nr_sources = ARRAY_SIZE(exynos4x12_clkset_mout_g2d_list),
-};
-
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_mpll_user,
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_fimg2d",
- },
- .sources = &exynos4x12_clkset_mout_g2d,
- .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 28, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC1, .shift = 0, .size = 4 },
- },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.9",
- .enable = exynos4_clk_ip_dmc_ctrl,
- .ctrlbit = (1 << 24),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.12",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (7 << 8),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.13",
- .enable = exynos4212_clk_ip_isp1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.14",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.15",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "flite",
- .devname = "exynos-fimc-lite.0",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "flite",
- .devname = "exynos-fimc-lite.1",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "fimg2d",
- .enable = exynos4_clk_ip_dmc_ctrl,
- .ctrlbit = (1 << 23),
- },
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4212_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-
- return 0;
-}
-
-static void exynos4212_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-}
-
-#else
-#define exynos4212_clock_suspend NULL
-#define exynos4212_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4212_clock_syscore_ops = {
- .suspend = exynos4212_clock_suspend,
- .resume = exynos4212_clock_resume,
-};
-
-void __init exynos4212_register_clocks(void)
-{
- int ptr;
-
- /* usbphy1 is removed */
- exynos4_clkset_group_list[4] = NULL;
-
- /* mout_mpll_user is used */
- exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk;
- exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
-
- exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC;
- exynos4_clk_mout_mpll.reg_src.shift = 12;
- exynos4_clk_mout_mpll.reg_src.size = 1;
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- register_syscore_ops(&exynos4212_clock_syscore_ops);
-}
+++ /dev/null
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Clock support for EXYNOS5 SoCs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos5_clock_save[] = {
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_TOP),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_GSCL),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_DISP1_0),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_FSYS),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC0),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC1),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_GSCL),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_DISP1),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_MFC),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_G3D),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_GEN),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_FSYS),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIC),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIS),
- SAVE_ITEM(EXYNOS5_CLKGATE_BLOCK),
- SAVE_ITEM(EXYNOS5_CLKDIV_TOP0),
- SAVE_ITEM(EXYNOS5_CLKDIV_TOP1),
- SAVE_ITEM(EXYNOS5_CLKDIV_GSCL),
- SAVE_ITEM(EXYNOS5_CLKDIV_DISP1_0),
- SAVE_ITEM(EXYNOS5_CLKDIV_GEN),
- SAVE_ITEM(EXYNOS5_CLKDIV_MAUDIO),
- SAVE_ITEM(EXYNOS5_CLKDIV_FSYS0),
- SAVE_ITEM(EXYNOS5_CLKDIV_FSYS1),
- SAVE_ITEM(EXYNOS5_CLKDIV_FSYS2),
- SAVE_ITEM(EXYNOS5_CLKDIV_FSYS3),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC0),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC1),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC2),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC3),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC4),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC5),
- SAVE_ITEM(EXYNOS5_SCLK_DIV_ISP),
- SAVE_ITEM(EXYNOS5_CLKSRC_TOP0),
- SAVE_ITEM(EXYNOS5_CLKSRC_TOP1),
- SAVE_ITEM(EXYNOS5_CLKSRC_TOP2),
- SAVE_ITEM(EXYNOS5_CLKSRC_TOP3),
- SAVE_ITEM(EXYNOS5_CLKSRC_GSCL),
- SAVE_ITEM(EXYNOS5_CLKSRC_DISP1_0),
- SAVE_ITEM(EXYNOS5_CLKSRC_MAUDIO),
- SAVE_ITEM(EXYNOS5_CLKSRC_FSYS),
- SAVE_ITEM(EXYNOS5_CLKSRC_PERIC0),
- SAVE_ITEM(EXYNOS5_CLKSRC_PERIC1),
- SAVE_ITEM(EXYNOS5_SCLK_SRC_ISP),
- SAVE_ITEM(EXYNOS5_EPLL_CON0),
- SAVE_ITEM(EXYNOS5_EPLL_CON1),
- SAVE_ITEM(EXYNOS5_EPLL_CON2),
- SAVE_ITEM(EXYNOS5_VPLL_CON0),
- SAVE_ITEM(EXYNOS5_VPLL_CON1),
- SAVE_ITEM(EXYNOS5_VPLL_CON2),
- SAVE_ITEM(EXYNOS5_PWR_CTRL1),
- SAVE_ITEM(EXYNOS5_PWR_CTRL2),
-};
-#endif
-
-static struct clk exynos5_clk_sclk_dptxphy = {
- .name = "sclk_dptx",
-};
-
-static struct clk exynos5_clk_sclk_hdmi24m = {
- .name = "sclk_hdmi24m",
- .rate = 24000000,
-};
-
-static struct clk exynos5_clk_sclk_hdmi27m = {
- .name = "sclk_hdmi27m",
- .rate = 27000000,
-};
-
-static struct clk exynos5_clk_sclk_hdmiphy = {
- .name = "sclk_hdmiphy",
-};
-
-static struct clk exynos5_clk_sclk_usbphy = {
- .name = "sclk_usbphy",
- .rate = 48000000,
-};
-
-static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable);
-}
-
-static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable);
-}
-
-static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
-}
-
-static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable);
-}
-
-static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable);
-}
-
-static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable);
-}
-
-static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable);
-}
-
-static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos5_clk_block_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable);
-}
-
-static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
-}
-
-static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable);
-}
-
-static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable);
-}
-
-static int exynos5_clk_ip_gscl_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GSCL, clk, enable);
-}
-
-static int exynos5_clk_ip_isp0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP0, clk, enable);
-}
-
-static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable);
-}
-
-static int exynos5_clk_hdmiphy_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk exynos5_clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_apll = {
- .clk = {
- .name = "sclk_apll",
- .parent = &exynos5_clk_mout_apll.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll_fout = {
- .clk = {
- .name = "mout_bpll_fout",
- },
- .sources = &clk_src_bpll_fout,
- .reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_bpll_list[] = {
- [0] = &clk_fin_bpll,
- [1] = &exynos5_clk_mout_bpll_fout.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_bpll = {
- .sources = exynos5_clk_src_bpll_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll = {
- .clk = {
- .name = "mout_bpll",
- },
- .sources = &exynos5_clk_src_bpll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_bpll_user_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &exynos5_clk_mout_bpll.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_bpll_user = {
- .sources = exynos5_clk_src_bpll_user_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_user_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll_user = {
- .clk = {
- .name = "mout_bpll_user",
- },
- .sources = &exynos5_clk_src_bpll_user,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_cpll = {
- .clk = {
- .name = "mout_cpll",
- },
- .sources = &clk_src_cpll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll_fout = {
- .clk = {
- .name = "mout_mpll_fout",
- },
- .sources = &clk_src_mpll_fout,
- .reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &exynos5_clk_mout_mpll_fout.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_mpll = {
- .sources = exynos5_clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .sources = &exynos5_clk_src_mpll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
-};
-
-static struct clk *exynos_clkset_vpllsrc_list[] = {
- [0] = &clk_fin_vpll,
- [1] = &exynos5_clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources exynos5_clkset_vpllsrc = {
- .sources = exynos_clkset_vpllsrc_list,
- .nr_sources = ARRAY_SIZE(exynos_clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk exynos5_clk_vpllsrc = {
- .clk = {
- .name = "vpll_src",
- .enable = exynos5_clksrc_mask_top_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos5_clkset_vpllsrc,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_sclk_vpll_list[] = {
- [0] = &exynos5_clk_vpllsrc.clk,
- [1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources exynos5_clkset_sclk_vpll = {
- .sources = exynos5_clkset_sclk_vpll_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_vpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_sclk_vpll = {
- .clk = {
- .name = "sclk_vpll",
- },
- .sources = &exynos5_clkset_sclk_vpll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_pixel = {
- .clk = {
- .name = "sclk_pixel",
- .parent = &exynos5_clk_sclk_vpll.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 },
-};
-
-static struct clk *exynos5_clkset_sclk_hdmi_list[] = {
- [0] = &exynos5_clk_sclk_pixel.clk,
- [1] = &exynos5_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos5_clkset_sclk_hdmi = {
- .sources = exynos5_clkset_sclk_hdmi_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk exynos5_clk_sclk_hdmi = {
- .clk = {
- .name = "sclk_hdmi",
- .enable = exynos5_clksrc_mask_disp1_0_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &exynos5_clkset_sclk_hdmi,
- .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 },
-};
-
-static struct clksrc_clk *exynos5_sclk_tv[] = {
- &exynos5_clk_sclk_pixel,
- &exynos5_clk_sclk_hdmi,
-};
-
-static struct clk *exynos5_clk_src_mpll_user_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &exynos5_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_mpll_user = {
- .sources = exynos5_clk_src_mpll_user_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll_user = {
- .clk = {
- .name = "mout_mpll_user",
- },
- .sources = &exynos5_clk_src_mpll_user,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_mout_cpu_list[] = {
- [0] = &exynos5_clk_mout_apll.clk,
- [1] = &exynos5_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_mout_cpu = {
- .sources = exynos5_clkset_mout_cpu_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_mout_cpu_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_cpu = {
- .clk = {
- .name = "mout_cpu",
- },
- .sources = &exynos5_clkset_mout_cpu,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_armclk = {
- .clk = {
- .name = "dout_armclk",
- .parent = &exynos5_clk_mout_cpu.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_arm2clk = {
- .clk = {
- .name = "dout_arm2clk",
- .parent = &exynos5_clk_dout_armclk.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 },
-};
-
-static struct clk exynos5_clk_armclk = {
- .name = "armclk",
- .parent = &exynos5_clk_dout_arm2clk.clk,
-};
-
-/* Core list of CMU_CDREX side */
-
-static struct clk *exynos5_clkset_cdrex_list[] = {
- [0] = &exynos5_clk_mout_mpll.clk,
- [1] = &exynos5_clk_mout_bpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_cdrex = {
- .sources = exynos5_clkset_cdrex_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_cdrex_list),
-};
-
-static struct clksrc_clk exynos5_clk_cdrex = {
- .clk = {
- .name = "clk_cdrex",
- },
- .sources = &exynos5_clkset_cdrex,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_acp = {
- .clk = {
- .name = "aclk_acp",
- .parent = &exynos5_clk_mout_mpll.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_pclk_acp = {
- .clk = {
- .name = "pclk_acp",
- .parent = &exynos5_clk_aclk_acp.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-static struct clk *exynos5_clkset_aclk_top_list[] = {
- [0] = &exynos5_clk_mout_mpll_user.clk,
- [1] = &exynos5_clk_mout_bpll_user.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk = {
- .sources = exynos5_clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_400 = {
- .clk = {
- .name = "aclk_400",
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
-};
-
-static struct clk *exynos5_clkset_aclk_333_166_list[] = {
- [0] = &exynos5_clk_mout_cpll.clk,
- [1] = &exynos5_clk_mout_mpll_user.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk_333_166 = {
- .sources = exynos5_clkset_aclk_333_166_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_333 = {
- .clk = {
- .name = "aclk_333",
- },
- .sources = &exynos5_clkset_aclk_333_166,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_166 = {
- .clk = {
- .name = "aclk_166",
- },
- .sources = &exynos5_clkset_aclk_333_166,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_266 = {
- .clk = {
- .name = "aclk_266",
- .parent = &exynos5_clk_mout_mpll_user.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_200 = {
- .clk = {
- .name = "aclk_200",
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_66_pre = {
- .clk = {
- .name = "aclk_66_pre",
- .parent = &exynos5_clk_mout_mpll_user.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_66 = {
- .clk = {
- .name = "aclk_66",
- .parent = &exynos5_clk_aclk_66_pre.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = {
- .clk = {
- .name = "mout_aclk_300_gscl_mid",
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_aclk_300_mid1_list[] = {
- [0] = &exynos5_clk_sclk_vpll.clk,
- [1] = &exynos5_clk_mout_cpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = {
- .sources = exynos5_clkset_aclk_300_mid1_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = {
- .clk = {
- .name = "mout_aclk_300_gscl_mid1",
- },
- .sources = &exynos5_clkset_aclk_300_gscl_mid1,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_aclk_300_gscl_list[] = {
- [0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk,
- [1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk_300_gscl = {
- .sources = exynos5_clkset_aclk_300_gscl_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = {
- .clk = {
- .name = "mout_aclk_300_gscl",
- },
- .sources = &exynos5_clkset_aclk_300_gscl,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_gscl_300_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = &exynos5_clk_mout_aclk_300_gscl.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_gscl_300 = {
- .sources = exynos5_clk_src_gscl_300_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_gscl_300_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_300_gscl = {
- .clk = {
- .name = "aclk_300_gscl",
- },
- .sources = &exynos5_clk_src_gscl_300,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 },
-};
-
-static struct clk exynos5_init_clocks_off[] = {
- {
- .name = "timers",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 24),
- }, {
- .name = "tmu_apbif",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peris_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "rtc",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peris_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "watchdog",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peris_ctrl,
- .ctrlbit = (1 << 19),
- }, {
- .name = "biu", /* bus interface unit clock */
- .devname = "dw_mmc.0",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "biu",
- .devname = "dw_mmc.1",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "biu",
- .devname = "dw_mmc.2",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "biu",
- .devname = "dw_mmc.3",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "sata",
- .devname = "exynos5-sata",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "sata-phy",
- .devname = "exynos5-sata-phy",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 24),
- }, {
- .name = "i2c",
- .devname = "exynos5-sata-phy-i2c",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 25),
- }, {
- .name = "mfc",
- .devname = "s5p-mfc-v6",
- .enable = exynos5_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "hdmi",
- .devname = "exynos5-hdmi",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "hdmiphy",
- .devname = "exynos5-hdmi",
- .enable = exynos5_clk_hdmiphy_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "mixer",
- .devname = "exynos5-mixer",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "dp",
- .devname = "exynos-dp",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "jpeg",
- .enable = exynos5_clk_ip_gen_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "dsim0",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.1",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.2",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 23),
- }, {
- .name = "spdif",
- .devname = "samsung-spdif",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 26),
- }, {
- .name = "ac97",
- .devname = "samsung-ac97",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "usbhost",
- .enable = exynos5_clk_ip_fsys_ctrl ,
- .ctrlbit = (1 << 18),
- }, {
- .name = "usbotg",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "nfcon",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "iop",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = ((1 << 30) | (1 << 26) | (1 << 23)),
- }, {
- .name = "core_iop",
- .enable = exynos5_clk_ip_core_ctrl,
- .ctrlbit = ((1 << 21) | (1 << 3)),
- }, {
- .name = "mcu_iop",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.2",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.3",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.4",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.5",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.6",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.7",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "i2c",
- .devname = "s3c2440-hdmiphy-i2c",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.0",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.1",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.2",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "gscl",
- .devname = "exynos-gsc.0",
- .enable = exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "gscl",
- .devname = "exynos-gsc.1",
- .enable = exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "gscl",
- .devname = "exynos-gsc.2",
- .enable = exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "gscl",
- .devname = "exynos-gsc.3",
- .enable = exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.1",
- .enable = &exynos5_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.0",
- .enable = &exynos5_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.2",
- .enable = &exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 9)
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.3",
- .enable = &exynos5_clk_ip_gen_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.4",
- .enable = &exynos5_clk_ip_gen_ctrl,
- .ctrlbit = (1 << 6)
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.5",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.6",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.7",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.8",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.9",
- .enable = &exynos5_clk_ip_isp0_ctrl,
- .ctrlbit = (0x3F << 8),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.10",
- .enable = &exynos5_clk_ip_isp1_ctrl,
- .ctrlbit = (0xF << 4),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.11",
- .enable = &exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 8)
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.12",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.13",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.14",
- .enable = &exynos5_clk_ip_acp_ctrl,
- .ctrlbit = (1 << 7)
- }
-};
-
-static struct clk exynos5_init_clocks_on[] = {
- {
- .name = "uart",
- .devname = "s5pv210-uart.0",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.1",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.2",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.3",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.4",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.5",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 5),
- }
-};
-
-static struct clk exynos5_clk_pdma0 = {
- .name = "dma",
- .devname = "dma-pl330.0",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 1),
-};
-
-static struct clk exynos5_clk_pdma1 = {
- .name = "dma",
- .devname = "dma-pl330.1",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 2),
-};
-
-static struct clk exynos5_clk_mdma1 = {
- .name = "dma",
- .devname = "dma-pl330.2",
- .enable = exynos5_clk_ip_gen_ctrl,
- .ctrlbit = (1 << 4),
-};
-
-static struct clk exynos5_clk_fimd1 = {
- .name = "fimd",
- .devname = "exynos5-fb.1",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-static struct clk *exynos5_clkset_group_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = NULL,
- [2] = &exynos5_clk_sclk_hdmi24m,
- [3] = &exynos5_clk_sclk_dptxphy,
- [4] = &exynos5_clk_sclk_usbphy,
- [5] = &exynos5_clk_sclk_hdmiphy,
- [6] = &exynos5_clk_mout_mpll_user.clk,
- [7] = &exynos5_clk_mout_epll.clk,
- [8] = &exynos5_clk_sclk_vpll.clk,
- [9] = &exynos5_clk_mout_cpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_group = {
- .sources = exynos5_clkset_group_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list),
-};
-
-/* Possible clock sources for aclk_266_gscl_sub Mux */
-static struct clk *clk_src_gscl_266_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = &exynos5_clk_aclk_266.clk,
-};
-
-static struct clksrc_sources clk_src_gscl_266 = {
- .sources = clk_src_gscl_266_list,
- .nr_sources = ARRAY_SIZE(clk_src_gscl_266_list),
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc0 = {
- .clk = {
- .name = "dout_mmc0",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc1 = {
- .clk = {
- .name = "dout_mmc1",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc2 = {
- .clk = {
- .name = "dout_mmc2",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc3 = {
- .clk = {
- .name = "dout_mmc3",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc4 = {
- .clk = {
- .name = "dout_mmc4",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart0 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.0",
- .enable = exynos5_clksrc_mask_peric0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart1 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.1",
- .enable = exynos5_clksrc_mask_peric0_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart2 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.2",
- .enable = exynos5_clksrc_mask_peric0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart3 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.3",
- .enable = exynos5_clksrc_mask_peric0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
- .clk = {
- .name = "ciu", /* card interface unit clock */
- .devname = "dw_mmc.0",
- .parent = &exynos5_clk_dout_mmc0.clk,
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 0),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
- .clk = {
- .name = "ciu",
- .devname = "dw_mmc.1",
- .parent = &exynos5_clk_dout_mmc1.clk,
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 4),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
- .clk = {
- .name = "ciu",
- .devname = "dw_mmc.2",
- .parent = &exynos5_clk_dout_mmc2.clk,
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 8),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
- .clk = {
- .name = "ciu",
- .devname = "dw_mmc.3",
- .parent = &exynos5_clk_dout_mmc3.clk,
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 12),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_mdout_spi0 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.0",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_mdout_spi1 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.1",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_mdout_spi2 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.2",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.0",
- .parent = &exynos5_clk_mdout_spi0.clk,
- .enable = exynos5_clksrc_mask_peric1_ctrl,
- .ctrlbit = (1 << 16),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.1",
- .parent = &exynos5_clk_mdout_spi1.clk,
- .enable = exynos5_clksrc_mask_peric1_ctrl,
- .ctrlbit = (1 << 20),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_spi2 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.2",
- .parent = &exynos5_clk_mdout_spi2.clk,
- .enable = exynos5_clksrc_mask_peric1_ctrl,
- .ctrlbit = (1 << 24),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_fimd1 = {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos5-fb.1",
- .enable = exynos5_clksrc_mask_disp1_0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clksrcs[] = {
- {
- .clk = {
- .name = "aclk_266_gscl",
- },
- .sources = &clk_src_gscl_266,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 },
- }, {
- .clk = {
- .name = "sclk_g3d",
- .devname = "mali-t604.0",
- .enable = exynos5_clk_block_ctrl,
- .ctrlbit = (1 << 1),
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
- }, {
- .clk = {
- .name = "sclk_sata",
- .devname = "exynos5-sata",
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS0, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_gscl_wrap",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos5_clksrc_mask_gscl_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_gscl_wrap",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos5_clksrc_mask_gscl_ctrl,
- .ctrlbit = (1 << 28),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam0",
- .enable = exynos5_clksrc_mask_gscl_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam1",
- .enable = exynos5_clksrc_mask_gscl_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_jpeg",
- .parent = &exynos5_clk_mout_cpll.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 },
- },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *exynos5_sysclks[] = {
- &exynos5_clk_mout_apll,
- &exynos5_clk_sclk_apll,
- &exynos5_clk_mout_bpll,
- &exynos5_clk_mout_bpll_fout,
- &exynos5_clk_mout_bpll_user,
- &exynos5_clk_mout_cpll,
- &exynos5_clk_mout_epll,
- &exynos5_clk_mout_mpll,
- &exynos5_clk_mout_mpll_fout,
- &exynos5_clk_mout_mpll_user,
- &exynos5_clk_vpllsrc,
- &exynos5_clk_sclk_vpll,
- &exynos5_clk_mout_cpu,
- &exynos5_clk_dout_armclk,
- &exynos5_clk_dout_arm2clk,
- &exynos5_clk_cdrex,
- &exynos5_clk_aclk_400,
- &exynos5_clk_aclk_333,
- &exynos5_clk_aclk_266,
- &exynos5_clk_aclk_200,
- &exynos5_clk_aclk_166,
- &exynos5_clk_aclk_300_gscl,
- &exynos5_clk_mout_aclk_300_gscl,
- &exynos5_clk_mout_aclk_300_gscl_mid,
- &exynos5_clk_mout_aclk_300_gscl_mid1,
- &exynos5_clk_aclk_66_pre,
- &exynos5_clk_aclk_66,
- &exynos5_clk_dout_mmc0,
- &exynos5_clk_dout_mmc1,
- &exynos5_clk_dout_mmc2,
- &exynos5_clk_dout_mmc3,
- &exynos5_clk_dout_mmc4,
- &exynos5_clk_aclk_acp,
- &exynos5_clk_pclk_acp,
- &exynos5_clk_sclk_spi0,
- &exynos5_clk_sclk_spi1,
- &exynos5_clk_sclk_spi2,
- &exynos5_clk_mdout_spi0,
- &exynos5_clk_mdout_spi1,
- &exynos5_clk_mdout_spi2,
- &exynos5_clk_sclk_fimd1,
-};
-
-static struct clk *exynos5_clk_cdev[] = {
- &exynos5_clk_pdma0,
- &exynos5_clk_pdma1,
- &exynos5_clk_mdma1,
- &exynos5_clk_fimd1,
-};
-
-static struct clksrc_clk *exynos5_clksrc_cdev[] = {
- &exynos5_clk_sclk_uart0,
- &exynos5_clk_sclk_uart1,
- &exynos5_clk_sclk_uart2,
- &exynos5_clk_sclk_uart3,
- &exynos5_clk_sclk_mmc0,
- &exynos5_clk_sclk_mmc1,
- &exynos5_clk_sclk_mmc2,
- &exynos5_clk_sclk_mmc3,
-};
-
-static struct clk_lookup exynos5_clk_lookup[] = {
- CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk),
- CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
- CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
- CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
- CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
- CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
- CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
- CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
- CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk),
- CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk),
- CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk),
- CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
- CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
- CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
- CLKDEV_INIT("exynos5-fb.1", "lcd", &exynos5_clk_fimd1),
-};
-
-static unsigned long exynos5_epll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
-static struct clk *exynos5_clks[] __initdata = {
- &exynos5_clk_sclk_hdmi27m,
- &exynos5_clk_sclk_hdmiphy,
- &clk_fout_bpll,
- &clk_fout_bpll_div2,
- &clk_fout_cpll,
- &clk_fout_mpll_div2,
- &exynos5_clk_armclk,
-};
-
-static u32 epll_div[][6] = {
- { 192000000, 0, 48, 3, 1, 0 },
- { 180000000, 0, 45, 3, 1, 0 },
- { 73728000, 1, 73, 3, 3, 47710 },
- { 67737600, 1, 90, 4, 3, 20762 },
- { 49152000, 0, 49, 3, 3, 9961 },
- { 45158400, 0, 45, 3, 3, 10381 },
- { 180633600, 0, 45, 3, 1, 10381 },
-};
-
-static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int epll_con, epll_con_k;
- unsigned int i;
- unsigned int tmp;
- unsigned int epll_rate;
- unsigned int locktime;
- unsigned int lockcnt;
-
- /* Return if nothing changed */
- if (clk->rate == rate)
- return 0;
-
- if (clk->parent)
- epll_rate = clk_get_rate(clk->parent);
- else
- epll_rate = clk_ext_xtal_mux.rate;
-
- if (epll_rate != 24000000) {
- pr_err("Invalid Clock : recommended clock is 24MHz.\n");
- return -EINVAL;
- }
-
- epll_con = __raw_readl(EXYNOS5_EPLL_CON0);
- epll_con &= ~(0x1 << 27 | \
- PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
- PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
- PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
- for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
- if (epll_div[i][0] == rate) {
- epll_con_k = epll_div[i][5] << 0;
- epll_con |= epll_div[i][1] << 27;
- epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT;
- epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT;
- epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT;
- break;
- }
- }
-
- if (i == ARRAY_SIZE(epll_div)) {
- printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
- __func__);
- return -EINVAL;
- }
-
- epll_rate /= 1000000;
-
- /* 3000 max_cycls : specification data */
- locktime = 3000 / epll_rate * epll_div[i][3];
- lockcnt = locktime * 10000 / (10000 / epll_rate);
-
- __raw_writel(lockcnt, EXYNOS5_EPLL_LOCK);
-
- __raw_writel(epll_con, EXYNOS5_EPLL_CON0);
- __raw_writel(epll_con_k, EXYNOS5_EPLL_CON1);
-
- do {
- tmp = __raw_readl(EXYNOS5_EPLL_CON0);
- } while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT));
-
- clk->rate = rate;
-
- return 0;
-}
-
-static struct clk_ops exynos5_epll_ops = {
- .get_rate = exynos5_epll_get_rate,
- .set_rate = exynos5_epll_set_rate,
-};
-
-static int xtal_rate;
-
-static unsigned long exynos5_fout_apll_get_rate(struct clk *clk)
-{
- return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0));
-}
-
-static struct clk_ops exynos5_fout_apll_ops = {
- .get_rate = exynos5_fout_apll_get_rate,
-};
-
-#ifdef CONFIG_PM
-static int exynos5_clock_suspend(void)
-{
- s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
-
- return 0;
-}
-
-static void exynos5_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
-}
-#else
-#define exynos5_clock_suspend NULL
-#define exynos5_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos5_clock_syscore_ops = {
- .suspend = exynos5_clock_suspend,
- .resume = exynos5_clock_resume,
-};
-
-void __init_or_cpufreq exynos5_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long apll;
- unsigned long bpll;
- unsigned long cpll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long vpll;
- unsigned long vpllsrc;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long mout_cdrex;
- unsigned long aclk_400;
- unsigned long aclk_333;
- unsigned long aclk_266;
- unsigned long aclk_200;
- unsigned long aclk_166;
- unsigned long aclk_66;
- unsigned int ptr;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
-
- xtal_rate = xtal;
-
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0));
- bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0));
- cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0));
- mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0));
- epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0),
- __raw_readl(EXYNOS5_EPLL_CON1));
-
- vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk);
- vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0),
- __raw_readl(EXYNOS5_VPLL_CON1));
-
- clk_fout_apll.ops = &exynos5_fout_apll_ops;
- clk_fout_bpll.rate = bpll;
- clk_fout_bpll_div2.rate = bpll >> 1;
- clk_fout_cpll.rate = cpll;
- clk_fout_mpll.rate = mpll;
- clk_fout_mpll_div2.rate = mpll >> 1;
- clk_fout_epll.rate = epll;
- clk_fout_vpll.rate = vpll;
-
- printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n"
- "M=%ld, E=%ld V=%ld",
- apll, bpll, cpll, mpll, epll, vpll);
-
- armclk = clk_get_rate(&exynos5_clk_armclk);
- mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk);
-
- aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk);
- aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk);
- aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk);
- aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk);
- aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk);
- aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk);
-
- printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n"
- "ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n"
- "ACLK166=%ld, ACLK66=%ld\n",
- armclk, mout_cdrex, aclk_400,
- aclk_333, aclk_266, aclk_200,
- aclk_166, aclk_66);
-
-
- clk_fout_epll.ops = &exynos5_epll_ops;
-
- if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll))
- printk(KERN_ERR "Unable to set parent %s of clock %s.\n",
- clk_fout_epll.name, exynos5_clk_mout_epll.clk.name);
-
- clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000);
- clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000);
-
- clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000);
- clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++)
- s3c_set_clksrc(&exynos5_clksrcs[ptr], true);
-}
-
-void __init exynos5_register_clocks(void)
-{
- int ptr;
-
- s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++)
- s3c_register_clksrc(exynos5_sysclks[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++)
- s3c_register_clksrc(exynos5_sclk_tv[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++)
- s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1);
-
- s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs));
- s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on));
-
- s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev));
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++)
- s3c_disable_clocks(exynos5_clk_cdev[ptr], 1);
-
- s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
- s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
- clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup));
-
- register_syscore_ops(&exynos5_clock_syscore_ops);
- s3c_pwmclk_init();
-}
#include <linux/irqdomain.h>
#include <linux/irqchip.h>
#include <linux/of_address.h>
+#include <linux/clocksource.h>
+#include <linux/clk-provider.h>
#include <linux/irqchip/arm-gic.h>
#include <asm/proc-fns.h>
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
#include <mach/regs-gpio.h>
+#include <mach/irqs.h>
#include <plat/cpu.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/sdhci.h>
static void exynos4_map_io(void);
static void exynos5_map_io(void);
static void exynos5440_map_io(void);
-static void exynos4_init_clocks(int xtal);
-static void exynos5_init_clocks(int xtal);
static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
static int exynos_init(void);
+unsigned long xxti_f = 0, xusbxti_f = 0;
+
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = EXYNOS4210_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4210,
.idcode = EXYNOS4212_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4212,
.idcode = EXYNOS4412_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4412,
.idcode = EXYNOS5250_SOC_ID,
.idmask = EXYNOS5_SOC_MASK,
.map_io = exynos5_map_io,
- .init_clocks = exynos5_init_clocks,
.init = exynos_init,
.name = name_exynos5250,
}, {
.pfn = __phys_to_pfn(EXYNOS5_PA_SROMC),
.length = SZ_4K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
- .length = SZ_4K,
- .type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_SYSRAM,
.pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM),
else
iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+ if (!IS_ENABLED(CONFIG_EXYNOS_ATAGS))
+ return
+
/* initialize device information early */
exynos4_default_sdhci0();
exynos4_default_sdhci1();
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
}
-static void __init exynos4_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
-
- if (soc_is_exynos4210())
- exynos4210_register_clocks();
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- exynos4212_register_clocks();
-
- exynos4_register_clocks();
- exynos4_setup_clocks();
-}
-
static void __init exynos5440_map_io(void)
{
iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
}
-static void __init exynos5_init_clocks(int xtal)
+void __init exynos_init_time(void)
{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- /* EXYNOS5440 can support only common clock framework */
-
- if (soc_is_exynos5440())
- return;
-
-#ifdef CONFIG_SOC_EXYNOS5250
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
-
- exynos5_register_clocks();
- exynos5_setup_clocks();
+ if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
+ of_clk_init(NULL);
+ clocksource_of_init();
+#endif
+ } else {
+ /* todo: remove after migrating legacy E4 platforms to dt */
+#ifdef CONFIG_ARCH_EXYNOS4
+ exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1);
+ exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
#endif
+ mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1);
+ }
+}
+
+static unsigned int max_combiner_nr(void)
+{
+ if (soc_is_exynos5250())
+ return EXYNOS5_MAX_COMBINER_NR;
+ else if (soc_is_exynos4412())
+ return EXYNOS4412_MAX_COMBINER_NR;
+ else if (soc_is_exynos4212())
+ return EXYNOS4212_MAX_COMBINER_NR;
+ else
+ return EXYNOS4210_MAX_COMBINER_NR;
}
+
void __init exynos4_init_irq(void)
{
unsigned int gic_bank_offset;
#endif
if (!of_have_populated_dt())
- combiner_init(S5P_VA_COMBINER_BASE, NULL);
+ combiner_init(S5P_VA_COMBINER_BASE, NULL,
+ max_combiner_nr(), COMBINER_IRQ(0, 0));
}
void __init exynos5_init_irq(void)
s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
}
+
+#ifdef CONFIG_EXYNOS_ATAGS
static void __iomem *exynos_eint_base;
static DEFINE_SPINLOCK(eint_lock);
static const struct of_device_id exynos_pinctrl_ids[] = {
{ .compatible = "samsung,exynos4210-pinctrl", },
{ .compatible = "samsung,exynos4x12-pinctrl", },
+ { .compatible = "samsung,exynos5250-pinctrl", },
};
struct device_node *pctrl_np, *wkup_np;
const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
return 0;
}
arch_initcall(exynos_init_irq_eint);
+#endif
+
+static struct resource exynos4_pmu_resource[] = {
+ DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU),
+ DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU1),
+#if defined(CONFIG_SOC_EXYNOS4412)
+ DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU2),
+ DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU3),
+#endif
+};
+
+static struct platform_device exynos4_device_pmu = {
+ .name = "arm-pmu",
+ .num_resources = ARRAY_SIZE(exynos4_pmu_resource),
+ .resource = exynos4_pmu_resource,
+};
+
+static int __init exynos_armpmu_init(void)
+{
+ if (!of_have_populated_dt()) {
+ if (soc_is_exynos4210() || soc_is_exynos4212())
+ exynos4_device_pmu.num_resources = 2;
+ platform_device_register(&exynos4_device_pmu);
+ }
+
+ return 0;
+}
+arch_initcall(exynos_armpmu_init);
#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
-extern void exynos4_timer_init(void);
+#include <linux/of.h>
+
+void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
+void exynos_init_time(void);
+extern unsigned long xxti_f, xusbxti_f;
struct map_desc;
void exynos_init_io(struct map_desc *mach_desc, int size);
void exynos5_restart(char mode, const char *cmd);
void exynos_init_late(void);
+/* ToDo: remove these after migrating legacy exynos4 platforms to dt */
+void exynos4_clk_init(struct device_node *np, int is_exynos4210, void __iomem *reg_base, unsigned long xom);
+void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
+
#ifdef CONFIG_PM_GENERIC_DOMAINS
int exynos_pm_late_initcall(void);
#else
#endif
struct device_node;
-void combiner_init(void __iomem *combiner_base, struct device_node *np);
+void combiner_init(void __iomem *combiner_base, struct device_node *np,
+ unsigned int max_nr, int irq_base);
extern struct smp_operations exynos_smp_ops;
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <plat/devs.h>
/* For EXYNOS4 and EXYNOS5 */
-#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12)
-
#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32)
/* For EXYNOS4 SoCs */
#define EXYNOS4_IRQ_ADC1 IRQ_SPI(107)
#define EXYNOS4_IRQ_PEN1 IRQ_SPI(108)
#define EXYNOS4_IRQ_KEYPAD IRQ_SPI(109)
-#define EXYNOS4_IRQ_PMU IRQ_SPI(110)
+#define EXYNOS4_IRQ_POWER_PMU IRQ_SPI(110)
#define EXYNOS4_IRQ_GPS IRQ_SPI(111)
#define EXYNOS4_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
#define EXYNOS4_IRQ_SLIMBUS IRQ_SPI(113)
#define EXYNOS4_IRQ_TSI IRQ_SPI(115)
#define EXYNOS4_IRQ_SATA IRQ_SPI(116)
+#define EXYNOS4_IRQ_PMU COMBINER_IRQ(2, 2)
+#define EXYNOS4_IRQ_PMU_CPU1 COMBINER_IRQ(3, 2)
+#define EXYNOS4_IRQ_PMU_CPU2 COMBINER_IRQ(18, 2)
+#define EXYNOS4_IRQ_PMU_CPU3 COMBINER_IRQ(19, 2)
+
#define EXYNOS4_IRQ_TMU_TRIG0 COMBINER_IRQ(2, 4)
#define EXYNOS4_IRQ_TMU_TRIG1 COMBINER_IRQ(3, 4)
#define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
#define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
-#define EXYNOS4_MAX_COMBINER_NR 16
+#define EXYNOS4210_MAX_COMBINER_NR 16
+#define EXYNOS4212_MAX_COMBINER_NR 18
+#define EXYNOS4412_MAX_COMBINER_NR 20
+#define EXYNOS4_MAX_COMBINER_NR EXYNOS4412_MAX_COMBINER_NR
#define EXYNOS4_IRQ_GPIO1_NR_GROUPS 16
#define EXYNOS4_IRQ_GPIO2_NR_GROUPS 9
#define IRQ_TC EXYNOS4_IRQ_PEN0
#define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD
-#define IRQ_PMU EXYNOS4_IRQ_PMU
#define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO
#define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC
#define EXYNOS5_IRQ_CEC IRQ_SPI(114)
#define EXYNOS5_IRQ_SATA IRQ_SPI(115)
-#define EXYNOS5_IRQ_MCT_L0 IRQ_SPI(120)
-#define EXYNOS5_IRQ_MCT_L1 IRQ_SPI(121)
#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123)
#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124)
#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125)
#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4)
#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3)
-#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4)
#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0)
#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1)
#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64)
/* Set the default NR_IRQS */
+#define EXYNOS_NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
-#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
+#ifndef CONFIG_SPARSE_IRQ
+#define NR_IRQS EXYNOS_NR_IRQS
+#endif
#endif /* __ASM_ARCH_IRQS_H */
#define EXYNOS5_PA_CMU 0x10010000
#define EXYNOS4_PA_SYSTIMER 0x10050000
-#define EXYNOS5_PA_SYSTIMER 0x101C0000
#define EXYNOS4_PA_WATCHDOG 0x10060000
#define EXYNOS5_PA_WATCHDOG 0x101D0000
+++ /dev/null
-/* arch/arm/mach-exynos4/include/mach/regs-mct.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 MCT configutation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_MCT_H
-#define __ASM_ARCH_REGS_MCT_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x))
-
-#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
-#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
-#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
-
-#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
-#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
-#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
-
-#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
-
-#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
-#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
-#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
-
-#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
-#define EXYNOS4_MCT_L_MASK (0xffffff00)
-
-#define MCT_L_TCNTB_OFFSET (0x00)
-#define MCT_L_ICNTB_OFFSET (0x08)
-#define MCT_L_TCON_OFFSET (0x20)
-#define MCT_L_INT_CSTAT_OFFSET (0x30)
-#define MCT_L_INT_ENB_OFFSET (0x34)
-#define MCT_L_WSTAT_OFFSET (0x40)
-
-#define MCT_G_TCON_START (1 << 8)
-#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
-#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
-
-#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
-#define MCT_L_TCON_INT_START (1 << 1)
-#define MCT_L_TCON_TIMER_START (1 << 0)
-
-#endif /* __ASM_ARCH_REGS_MCT_H */
#include <plat/regs-srom.h>
#include <plat/sdhci.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include "common.h"
static void __init armlex4210_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(armlex4210_uartcfgs,
ARRAY_SIZE(armlex4210_uartcfgs));
}
.map_io = armlex4210_map_io,
.init_machine = armlex4210_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.restart = exynos4_restart,
MACHINE_END
* published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
#include <linux/serial_core.h>
+#include <linux/memblock.h>
+#include <linux/clocksource.h>
#include <asm/mach/arch.h>
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-serial.h>
+#include <plat/mfc.h>
#include "common.h"
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the Exynos4 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
- "exynos4210-uart.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
- "exynos4210-uart.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART2,
- "exynos4210-uart.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART3,
- "exynos4210-uart.3", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0),
- "exynos4-sdhci.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1),
- "exynos4-sdhci.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2),
- "exynos4-sdhci.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3),
- "exynos4-sdhci.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
- "s3c2440-i2c.0", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1),
- "s3c2440-i2c.1", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2),
- "s3c2440-i2c.2", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3),
- "s3c2440-i2c.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4),
- "s3c2440-i2c.4", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5),
- "s3c2440-i2c.5", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6),
- "s3c2440-i2c.6", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7),
- "s3c2440-i2c.7", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
- "exynos4210-spi.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
- "exynos4210-spi.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2,
- "exynos4210-spi.2", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU,
- "exynos-tmu", NULL),
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13620000,
- "exynos-sysmmu.0", NULL), /* MFC_L */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13630000,
- "exynos-sysmmu.1", NULL), /* MFC_R */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E20000,
- "exynos-sysmmu.2", NULL), /* TV */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A60000,
- "exynos-sysmmu.3", NULL), /* JPEG */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A30000,
- "exynos-sysmmu.4", NULL), /* ROTATOR */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A20000,
- "exynos-sysmmu.5", NULL), /* FIMC0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A30000,
- "exynos-sysmmu.6", NULL), /* FIMC1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A40000,
- "exynos-sysmmu.7", NULL), /* FIMC2 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A50000,
- "exynos-sysmmu.8", NULL), /* FIMC3 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A20000,
- "exynos-sysmmu.9", NULL), /* G2D(4210) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A40000,
- "exynos-sysmmu.9", NULL), /* G2D(4x12) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11E20000,
- "exynos-sysmmu.10", NULL), /* FIMD0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12220000,
- "exynos-sysmmu.11", NULL), /* FIMD1(4210) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12260000,
- "exynos-sysmmu.12", NULL), /* IS0(4x12) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x122B0000,
- "exynos-sysmmu.13", NULL), /* IS1(4x12) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123B0000,
- "exynos-sysmmu.14", NULL), /* FIMC-LITE0(4x12) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123C0000,
- "exynos-sysmmu.15", NULL), /* FIMC-LITE1(4x12) */
- {},
-};
-
static void __init exynos4_dt_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
}
static void __init exynos4_dt_machine_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- exynos4_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static char const *exynos4_dt_compat[] __initdata = {
NULL
};
+static void __init exynos4_reserve(void)
+{
+#ifdef CONFIG_S5P_DEV_MFC
+ struct s5p_mfc_dt_meminfo mfc_mem;
+
+ /* Reserve memory for MFC only if it's available */
+ mfc_mem.compatible = "samsung,mfc-v5";
+ if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
+ s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
+ mfc_mem.lsize);
+#endif
+}
DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
.smp = smp_ops(exynos_smp_ops),
.map_io = exynos4_dt_map_io,
.init_machine = exynos4_dt_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.dt_compat = exynos4_dt_compat,
.restart = exynos4_restart,
+ .reserve = exynos4_reserve,
MACHINE_END
#include <linux/of_platform.h>
#include <linux/of_fdt.h>
-#include <linux/serial_core.h>
#include <linux/memblock.h>
#include <linux/io.h>
+#include <linux/clocksource.h>
#include <asm/mach/arch.h>
-#include <mach/map.h>
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
-#include <plat/regs-serial.h>
#include <plat/mfc.h>
#include "common.h"
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the EXYNOS5 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0,
- "exynos4210-uart.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1,
- "exynos4210-uart.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2,
- "exynos4210-uart.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
- "exynos4210-uart.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
- "s3c2440-i2c.0", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
- "s3c2440-i2c.1", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2),
- "s3c2440-i2c.2", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3),
- "s3c2440-i2c.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4),
- "s3c2440-i2c.4", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5),
- "s3c2440-i2c.5", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6),
- "s3c2440-i2c.6", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7),
- "s3c2440-i2c.7", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8),
- "s3c2440-hdmiphy-i2c", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
- "dw_mmc.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
- "dw_mmc.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2,
- "dw_mmc.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3,
- "dw_mmc.3", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
- "exynos4210-spi.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,
- "exynos4210-spi.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
- "exynos4210-spi.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000,
- "exynos5-sata", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000,
- "exynos5-sata-phy", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000,
- "exynos5-sata-phy-i2c", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0,
- "exynos-gsc.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1,
- "exynos-gsc.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2,
- "exynos-gsc.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
- "exynos-gsc.3", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000,
- "exynos5-hdmi", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000,
- "exynos5-mixer", NULL),
- OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000,
- "exynos-tmu", NULL),
- OF_DEV_AUXDATA("samsung,i2s-v5", 0x03830000,
- "samsung-i2s.0", NULL),
- OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D60000,
- "samsung-i2s.1", NULL),
- OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D70000,
- "samsung-i2s.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11210000,
- "exynos-sysmmu.0", "mfc"), /* MFC_L */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11200000,
- "exynos-sysmmu.1", "mfc"), /* MFC_R */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14650000,
- "exynos-sysmmu.2", NULL), /* TV */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11F20000,
- "exynos-sysmmu.3", "jpeg"), /* JPEG */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11D40000,
- "exynos-sysmmu.4", NULL), /* ROTATOR */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E80000,
- "exynos-sysmmu.5", "gscl"), /* GSCL0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E90000,
- "exynos-sysmmu.6", "gscl"), /* GSCL1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EA0000,
- "exynos-sysmmu.7", "gscl"), /* GSCL2 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EB0000,
- "exynos-sysmmu.8", "gscl"), /* GSCL3 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13260000,
- "exynos-sysmmu.9", NULL), /* FIMC-IS0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x132C0000,
- "exynos-sysmmu.10", NULL), /* FIMC-IS1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14640000,
- "exynos-sysmmu.11", NULL), /* FIMD1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C40000,
- "exynos-sysmmu.12", NULL), /* FIMC-LITE0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C50000,
- "exynos-sysmmu.13", NULL), /* FIMC-LITE1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A60000,
- "exynos-sysmmu.14", NULL), /* G2D */
- {},
-};
-
-static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0,
- "exynos4210-uart.0", NULL),
- {},
-};
-
static void __init exynos5_dt_map_io(void)
{
- unsigned long root = of_get_flat_dt_root();
-
exynos_init_io(NULL, 0);
-
- if (of_flat_dt_is_compatible(root, "samsung,exynos5250"))
- s3c24xx_init_clocks(24000000);
}
static void __init exynos5_dt_machine_init(void)
}
}
- if (of_machine_is_compatible("samsung,exynos5250"))
- of_platform_populate(NULL, of_default_bus_match_table,
- exynos5250_auxdata_lookup, NULL);
- else if (of_machine_is_compatible("samsung,exynos5440"))
- of_platform_populate(NULL, of_default_bus_match_table,
- exynos5440_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static char const *exynos5_dt_compat[] __initdata = {
.map_io = exynos5_dt_map_io,
.init_machine = exynos5_dt_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.dt_compat = exynos5_dt_compat,
.restart = exynos5_restart,
.reserve = exynos5_reserve,
#include <plat/fimc-core.h>
#include <plat/camport.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include "common.h"
static void __init nuri_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
+ xxti_f = 0;
+ xusbxti_f = 24000000;
}
static void __init nuri_reserve(void)
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.reserve = &nuri_reserve,
.restart = exynos4_restart,
MACHINE_END
#include <plat/hdmi.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <drm/exynos_drm.h>
#include "common.h"
static void __init origen_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+ xxti_f = 0;
+ xusbxti_f = 24000000;
}
static void __init origen_power_init(void)
.map_io = origen_map_io,
.init_machine = origen_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.reserve = &origen_reserve,
.restart = exynos4_restart,
MACHINE_END
#include <plat/regs-serial.h>
#include <plat/sdhci.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
static void __init smdk4x12_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
}
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
#include <plat/clock.h>
#include <plat/hdmi.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
static void __init smdkv310_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
+ xxti_f = 12000000;
+ xusbxti_f = 24000000;
}
static void __init smdkv310_reserve(void)
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
#include <plat/mfc.h>
#include <plat/sdhci.h>
#include <plat/fimc-core.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/camport.h>
#include <mach/map.h>
static void __init universal_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
- s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
+ xxti_f = 0;
+ xusbxti_f = 24000000;
}
static void s5p_tv_setup(void)
.map_io = universal_map_io,
.init_machine = universal_machine_init,
.init_late = exynos_init_late,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.reserve = &universal_reserve,
.restart = exynos4_restart,
MACHINE_END
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
+#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
select ISA
select ISA_DMA
select PCI
+ select VIRT_TO_BUS
help
Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at:
busy->mux.reg = reg;
busy->mux.shift = shift;
- busy->mux.width = width;
+ busy->mux.mask = BIT(width) - 1;
busy->mux.lock = &imx_ccm_lock;
busy->mux_ops = &clk_mux_ops;
clk_prepare_enable(clk[gpio3_gate]);
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ clk_prepare_enable(clk[max_gate]);
/*
* SCC is needed to boot via mmc after a watchdog reset. The clock code
static struct clk_onecell_data clk_data;
static enum mx6q_clks const clks_init_on[] __initconst = {
- mmdc_ch0_axi, rom,
+ mmdc_ch0_axi, rom, pll1_sys,
};
static struct clk_div_table clk_enet_ref_table[] = {
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern u32 imx_get_cpu_arg(int cpu);
+extern void imx_set_cpu_arg(int cpu, u32 arg);
extern void v7_cpu_resume(void);
extern u32 *pl310_get_save_ptr(void);
#ifdef CONFIG_SMP
#ifdef CONFIG_PM
/*
- * The following code is located into the .data section. This is to
- * allow phys_l2x0_saved_regs to be accessed with a relative load
- * as we are running on physical address here.
+ * The following code must assume it is running from physical address
+ * where absolute virtual addresses to the data section have to be
+ * turned into relative ones.
*/
- .data
- .align
#ifdef CONFIG_CACHE_L2X0
.macro pl310_resume
- ldr r2, phys_l2x0_saved_regs
+ adr r0, l2x0_saved_regs_offset
+ ldr r2, [r0]
+ add r2, r2, r0
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
str r1, [r0, #L2X0_CTRL] @ re-enable L2
.endm
- .globl phys_l2x0_saved_regs
-phys_l2x0_saved_regs:
- .long 0
+l2x0_saved_regs_offset:
+ .word l2x0_saved_regs - .
+
#else
.macro pl310_resume
.endm
void imx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
+ /*
+ * We use the cpu jumping argument register to sync with
+ * imx_cpu_kill() which is running on cpu0 and waiting for
+ * the register being cleared to kill the cpu.
+ */
+ imx_set_cpu_arg(cpu, ~0);
cpu_do_idle();
}
int imx_cpu_kill(unsigned int cpu)
{
+ unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+ while (imx_get_cpu_arg(cpu) == 0)
+ if (time_after(jiffies, timeout))
+ return 0;
imx_enable_cpu(cpu, false);
+ imx_set_cpu_arg(cpu, 0);
return 1;
}
NULL
};
+static void __init imx25_timer_init(void)
+{
+ mx25_clocks_init_dt();
+}
+
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
#include "common.h"
#include "hardware.h"
-extern unsigned long phys_l2x0_saved_regs;
-
static int imx6q_suspend_finish(unsigned long val)
{
cpu_do_idle();
void __init imx6q_pm_init(void)
{
- /*
- * The l2x0 core code provides an infrastucture to save and restore
- * l2x0 registers across suspend/resume cycle. But because imx6q
- * retains L2 content during suspend and needs to resume L2 before
- * MMU is enabled, it can only utilize register saving support and
- * have to take care of restoring on its own. So we save physical
- * address of the data structure used by l2x0 core to save registers,
- * and later restore the necessary ones in imx6q resume entry.
- */
-#ifdef CONFIG_CACHE_L2X0
- phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
-#endif
-
suspend_set_ops(&imx6q_pm_ops);
}
src_base + SRC_GPR1 + cpu * 8);
}
+u32 imx_get_cpu_arg(int cpu)
+{
+ cpu = cpu_logical_map(cpu);
+ return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
+void imx_set_cpu_arg(int cpu, u32 arg)
+{
+ cpu = cpu_logical_map(cpu);
+ writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
void imx_src_prepare_restart(void)
{
u32 val;
'A' + (ap_sc_id & 0x0f));
soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR_OR_NULL(soc_dev)) {
+ if (IS_ERR(soc_dev)) {
kfree(soc_dev_attr->revision);
kfree(soc_dev_attr);
return;
}
parent = soc_device_to_device(soc_dev);
-
- if (!IS_ERR_OR_NULL(parent))
- integrator_init_sysfs(parent, ap_sc_id);
+ integrator_init_sysfs(parent, ap_sc_id);
of_platform_populate(root, of_default_bus_match_table,
ap_auxdata_lookup, parent);
'A' + (intcp_sc_id & 0x0f));
soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR_OR_NULL(soc_dev)) {
+ if (IS_ERR(soc_dev)) {
kfree(soc_dev_attr->revision);
kfree(soc_dev_attr);
return;
}
parent = soc_device_to_device(soc_dev);
-
- if (!IS_ERR_OR_NULL(parent))
- integrator_init_sysfs(parent, intcp_sc_id);
-
+ integrator_init_sysfs(parent, intcp_sc_id);
of_platform_populate(root, of_default_bus_match_table,
intcp_auxdata_lookup, parent);
}
static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
.pin = 14,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device vulcan_w1_gpio = {
struct device_node *np = of_find_compatible_node(
NULL, NULL, "marvell,kirkwood-gating-clock");
-
struct of_phandle_args clkspec;
+ struct clk *clk;
clkspec.np = np;
clkspec.args_count = 1;
- clkspec.args[0] = CGC_BIT_GE0;
- orion_clkdev_add(NULL, "mv643xx_eth_port.0",
- of_clk_get_from_provider(&clkspec));
-
clkspec.args[0] = CGC_BIT_PEX0;
orion_clkdev_add("0", "pcie",
of_clk_get_from_provider(&clkspec));
orion_clkdev_add("1", "pcie",
of_clk_get_from_provider(&clkspec));
- clkspec.args[0] = CGC_BIT_GE1;
- orion_clkdev_add(NULL, "mv643xx_eth_port.1",
+ clkspec.args[0] = CGC_BIT_SDIO;
+ orion_clkdev_add(NULL, "mvsdio",
of_clk_get_from_provider(&clkspec));
+
+ /*
+ * The ethernet interfaces forget the MAC address assigned by
+ * u-boot if the clocks are turned off. Until proper DT support
+ * is available we always enable them for now.
+ */
+ clkspec.args[0] = CGC_BIT_GE0;
+ clk = of_clk_get_from_provider(&clkspec);
+ orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
+ clk_prepare_enable(clk);
+
+ clkspec.args[0] = CGC_BIT_GE1;
+ clk = of_clk_get_from_provider(&clkspec);
+ orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
+ clk_prepare_enable(clk);
}
static void __init kirkwood_of_clk_init(void)
static struct mvsdio_platform_data guruplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
+ .gpio_card_detect = -1,
+ .gpio_write_protect = -1,
};
static struct gpio_led guruplug_led_pins[] = {
static struct mvsdio_platform_data openrd_mvsdio_data = {
.gpio_card_detect = 29, /* MPP29 used as SD card detect */
+ .gpio_write_protect = -1,
};
static unsigned int openrd_mpp_config[] __initdata = {
static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
.gpio_card_detect = 28,
+ .gpio_write_protect = -1,
};
static unsigned int rd88f6281_mpp_config[] __initdata = {
*/
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/mach/arch.h>
{
u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
- writel_relaxed(0, event_base + TIMER_CLEAR);
+ ctrl &= ~TIMER_ENABLE_EN;
+ writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+ writel_relaxed(ctrl, event_base + TIMER_CLEAR);
writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
return 0;
#define ARMADA_370_XP_MAX_PER_CPU_IRQS (28)
+#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ (5)
+
#define ACTIVE_DOORBELLS (8)
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
#ifdef CONFIG_SMP
irq_hw_number_t hwirq = irqd_to_hwirq(d);
- if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+ if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
writel(hwirq, main_int_base +
ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
else
#ifdef CONFIG_SMP
irq_hw_number_t hwirq = irqd_to_hwirq(d);
- if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+ if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
writel(hwirq, main_int_base +
ARMADA_370_XP_INT_SET_ENABLE_OFFS);
else
writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
irq_set_status_flags(virq, IRQ_LEVEL);
- if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) {
+ if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
irq_set_percpu_devid(virq);
irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
handle_percpu_devid_irq);
.xlate = irq_domain_xlate_onecell,
};
-void __init icoll_of_init(struct device_node *np,
+static void __init icoll_of_init(struct device_node *np,
struct device_node *interrupt_parent)
{
/*
.lower_margin = 4,
.hsync_len = 1,
.vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
},
};
.lower_margin = 10,
.hsync_len = 10,
.vsync_len = 10,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
},
};
.lower_margin = 45,
.hsync_len = 1,
.vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
},
};
.lower_margin = 13,
.hsync_len = 48,
.vsync_len = 3,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
- FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
.lower_margin = 0x15,
.hsync_len = 64,
.vsync_len = 4,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
- FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
.lower_margin = 2,
.hsync_len = 15,
.vsync_len = 15,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT
},
};
mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
static inline void enable_clk_enet_out(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
}
mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
mxsfb_pdata.default_bpp = 16;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
}
static void __init sc_sps1_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
#define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
+
+ mxsfb_pdata.mode_list = cfa10049_video_modes;
+ mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
+ mxsfb_pdata.default_bpp = 32;
+ mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
}
static void __init cfa10037_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
-
- mxsfb_pdata.mode_list = cfa10049_video_modes;
- mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
- mxsfb_pdata.default_bpp = 32;
- mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
}
static void __init apf28_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
mxsfb_pdata.default_bpp = 16;
mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
static void __init mxs_machine_init(void)
#include <mach/mx23.h>
#include <mach/mx28.h>
+#include <mach/common.h>
/*
* Define the MX23 memory map.
#include <asm/processor.h> /* for cpu_relax() */
#include <mach/mxs.h>
+#include <mach/common.h>
#define OCOTP_WORD_OFFSET 0x20
#define OCOTP_WORD_COUNT 0x20
TI OMAP 1710 H3 board support. Say Y here if you have such
a board.
-config MACH_OMAP_HTCWIZARD
- bool "HTC Wizard"
- depends on ARCH_OMAP850
- help
- HTC Wizard smartphone support (AKA QTEK 9100, ...)
-
config MACH_HERALD
bool "HTC Herald"
depends on ARCH_OMAP850
};
static struct clk usb_dc_ck = {
- .name = "usb_dc_ck",
- .ops = &clkops_generic,
- /* Direct from ULPD, no parent */
- .rate = 48000000,
- .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
- .enable_bit = USB_REQ_EN_SHIFT,
-};
-
-static struct clk usb_dc_ck7xx = {
.name = "usb_dc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX),
- CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX),
- CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX),
+ CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX),
CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310),
CLK(NULL, "mclk", &mclk_16xx, CK_16XX),
CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310),
#include <plat/i2c.h>
+#include <mach/irqs.h>
+
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
#else
default y
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SERIAL_8250
- select SERIAL_8250_CONSOLE
- select SERIAL_CORE_CONSOLE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
default y
select OMAP_PACKAGE_CBP
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SERIAL_8250
- select SERIAL_8250_CONSOLE
- select SERIAL_CORE_CONSOLE
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
config OMAP4_ERRATA_I688
bool "OMAP4 errata: Async Bridge Corruption"
- depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM
+ depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM
select ARCH_HAS_BARRIERS
help
If a data is stalled inside asynchronous bridge because of back
omap_display_init(&sdp2430_dss_data);
}
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
static struct omap_smc91x_platform_data board_smc91x_data = {
.cs = 5,
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 57,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = 61,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 57,
- .reset_gpio_port[1] = 61,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
sdp3430_display_init();
enable_board_wakeup_source();
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 126,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = 61,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 126,
- .reset_gpio_port[1] = 61,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
enable_board_wakeup_source();
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
};
#endif
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = GPIO_USB_NRESET,
+ .vcc_gpio = GPIO_USB_POWER,
+ .vcc_polarity = 1,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = GPIO_USB_NRESET,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
static struct mtd_partition crane_nand_partitions[] = {
return;
}
- ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
- "usb_ehci_enable");
- if (ret < 0) {
- pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
- return;
- }
-
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
}
omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 57,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
#else
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
#endif
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 57,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
{} /* Terminator */
};
-
static void __init am3517_evm_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
/* DSS */
{} /* Terminator */
};
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = OMAP_MAX_GPIO_LINES + 6,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = OMAP_MAX_GPIO_LINES + 7,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6,
- .reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7,
- .reset_gpio_port[2] = -EINVAL
};
static void __init cm_t35_init_usbh(void)
msleep(1);
}
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
#define HSUSB2_RESET_GPIO (147)
#define USB_HUB_RESET_GPIO (152)
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = HSUSB1_RESET_GPIO,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = HSUSB2_RESET_GPIO,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = HSUSB1_RESET_GPIO,
- .reset_gpio_port[1] = HSUSB2_RESET_GPIO,
- .reset_gpio_port[2] = -EINVAL,
};
static int __init cm_t3517_init_usbh(void)
msleep(1);
}
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&cm_t3517_ehci_pdata);
return 0;
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3517_init,
.init_late = am35xx_init_late,
- .init_time = omap3_gp_gptimer_timer_init,
+ .init_time = omap3_gptimer_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
+ .init_late = omap3_init_late,
.init_time = omap3_sync32k_timer_init,
.dt_compat = omap3_boards_compat,
.restart = omap3xxx_restart,
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
+ .init_late = omap3_init_late,
.init_time = omap3_secure_sync32k_timer_init,
.dt_compat = omap3_gp_boards_compat,
.restart = omap3xxx_restart,
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
- .init_time = omap3_am33xx_gptimer_timer_init,
+ .init_time = omap3_gptimer_timer_init,
.dt_compat = am33xx_boards_compat,
.restart = am33xx_restart,
MACHINE_END
return 0;
}
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
static struct omap_smc91x_platform_data board_smc91x_data = {
.cs = 1,
omap3_pmic_init("twl4030", &igep_twldata);
}
+static struct usbhs_phy_data igep2_phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = IGEP2_GPIO_USBH_NRESET,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
+static struct usbhs_phy_data igep3_phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = IGEP3_GPIO_USBH_NRESET,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL,
};
static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET,
- .reset_gpio_port[2] = -EINVAL,
};
#ifdef CONFIG_OMAP_MUX
if (machine_is_igep0020()) {
omap_display_init(&igep2_dss_data);
igep2_init_smsc911x();
+ usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
usbhs_init(&igep2_usbhs_bdata);
} else {
+ usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
usbhs_init(&igep3_usbhs_bdata);
}
}
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
#include <linux/usb/phy.h>
+#include <linux/usb/nop-usb-xceiv.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
static struct gpio_led gpio_leds[];
+/* PHY's VCC regulator might be added later, so flag that we need it */
+static struct nop_usb_xceiv_platform_data hsusb2_phy_data = {
+ .needs_vcc = true,
+};
+
+static struct usbhs_phy_data phy_data[] = {
+ {
+ .port = 2,
+ .reset_gpio = 147,
+ .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */
+ .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */
+ .platform_data = &hsusb2_phy_data,
+ },
+};
+
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
}
dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
- gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
- "nEN_USB_PWR");
+ /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
+ phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
+ phy_data[0].vcc_polarity = beagle_config.usb_pwr_level;
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
return 0;
}
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
/* Initialize the omap3 opp table if not already created. */
r = omap3_opp_init();
- if (IS_ERR_VALUE(r) && (r != -EEXIST)) {
+ if (r < 0 && (r != -EEXIST)) {
pr_err("%s: opp default init failed\n", __func__);
return r;
}
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
usbhs_init(&usbhs_bdata);
+
board_nand_init(omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */
REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */
- REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+ REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */
REGULATOR_SUPPLY("vaux2", NULL),
};
return 0;
}
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = -1, /* set at runtime */
+ .vcc_gpio = -EINVAL,
+ },
+};
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- /* PHY reset GPIO will be runtime programmed based on EVM version */
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
/* setup EHCI phy reset config */
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
- usbhs_bdata.reset_gpio_port[1] = 21;
+ phy_data[0].reset_gpio = 21;
/* EVM REV >= E can supply 500mA with EXTVBUS programming */
musb_board_data.power = 500;
} else {
/* setup EHCI phy reset on MDC */
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
- usbhs_bdata.reset_gpio_port[1] = 135;
+ phy_data[0].reset_gpio = 135;
}
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3evm_nand_partitions,
ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
};
static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
- REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+ REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */
};
/* ads7846 on SPI and 2 nub controllers on I2C */
printk(KERN_ERR "wl1251 board initialisation failed\n");
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 16,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_leds_gpio,
&pandora_keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 16,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
+
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
gpmc_nand_init(&pandora_nand_data, NULL);
#define OMAP3_STALKER_TS_GPIO 175
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 21,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 21,
- .reset_gpio_port[2] = -EINVAL,
};
#ifdef CONFIG_OMAP_MUX
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
};
#endif
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 147,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3_touchbook_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
- .reset_gpio_port[2] = -EINVAL
};
static void omap3_touchbook_poweroff(void)
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3touchbook_nand_partitions,
ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
#include <linux/ti_wilink_st.h>
#include <linux/usb/musb.h>
#include <linux/usb/phy.h>
+#include <linux/usb/nop-usb-xceiv.h>
#include <linux/wl12xx.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/omap-abe-twl6040.h>
.id = -1,
};
+/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */
+static struct nop_usb_xceiv_platform_data hsusb1_phy_data = {
+ /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
+ .clk_rate = 19200000,
+};
+
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = GPIO_HUB_NRESET,
+ .vcc_gpio = GPIO_HUB_POWER,
+ .vcc_polarity = 1,
+ .platform_data = &hsusb1_phy_data,
+ },
+};
+
static struct platform_device *panda_devices[] __initdata = {
&leds_gpio,
&wl1271_device,
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = false,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
-};
-
-static struct gpio panda_ehci_gpios[] __initdata = {
- { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" },
- { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" },
};
static void __init omap4_ehci_init(void)
{
int ret;
- struct clk *phy_ref_clk;
/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
- phy_ref_clk = clk_get(NULL, "auxclk3_ck");
- if (IS_ERR(phy_ref_clk)) {
- pr_err("Cannot request auxclk3\n");
- return;
- }
- clk_set_rate(phy_ref_clk, 19200000);
- clk_prepare_enable(phy_ref_clk);
-
- /* disable the power to the usb hub prior to init and reset phy+hub */
- ret = gpio_request_array(panda_ehci_gpios,
- ARRAY_SIZE(panda_ehci_gpios));
- if (ret) {
- pr_err("Unable to initialize EHCI power/reset\n");
- return;
- }
-
- gpio_export(GPIO_HUB_POWER, 0);
- gpio_export(GPIO_HUB_NRESET, 0);
- gpio_set_value(GPIO_HUB_NRESET, 1);
+ ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL);
+ if (ret)
+ pr_err("Failed to add main_clk alias to auxclk3_ck\n");
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
-
- /* enable power to hub */
- gpio_set_value(GPIO_HUB_POWER, 1);
}
static struct omap_musb_board_data musb_board_data = {
return 0;
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = OVERO_GPIO_USBH_NRESET,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
overo_spi_init();
overo_init_smsc911x();
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/usb/phy.h>
#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
sdrc_params = nokia_get_sdram_timings();
omap_sdrc_init(sdrc_params, sdrc_params);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
rx51_peripherals_init();
},
};
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = ZOOM3_EHCI_RESET_GPIO,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO,
- .reset_gpio_port[2] = -EINVAL,
};
static void __init omap_zoom_init(void)
} else if (machine_is_omap_zoom3()) {
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
clk_set_parent(&timer3_fck, &sys_clkin_ck);
clk_set_parent(&timer6_fck, &sys_clkin_ck);
+ /*
+ * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
+ * the design/spec, so as a result, for example, timer which supposed
+ * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
+ * not expected by any use-case, so change WDT1 clock source to PRCM
+ * 32KHz clock.
+ */
+ clk_set_parent(&wdt1_fck, &clkdiv32k_ick);
return 0;
}
*/
#define OMAP4_DPLL_ABE_DEFFREQ 98304000
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ 960000000
+
/* Root clocks */
DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
+DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
+ OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+ OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
+
DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X),
CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X),
CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X),
+ CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X),
CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X),
CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X),
CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X),
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+ /*
+ * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+ * domain can transition to retention state when not in use.
+ */
+ rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+ if (rc)
+ pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
return 0;
}
return -ENOENT;
r = clk_set_rate(mpurate_ck, mpurate);
- if (IS_ERR_VALUE(r)) {
+ if (r < 0) {
WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
mpurate_ck_name, mpurate, r);
clk_put(mpurate_ck);
extern void omap2_sync32k_timer_init(void);
extern void omap3_sync32k_timer_init(void);
extern void omap3_secure_sync32k_timer_init(void);
-extern void omap3_gp_gptimer_timer_init(void);
-extern void omap3_am33xx_gptimer_timer_init(void);
+extern void omap3_gptimer_timer_init(void);
extern void omap4_local_timer_init(void);
extern void omap5_realtime_timer_init(void);
void omap3630_init_late(void);
void am35xx_init_late(void);
void ti81xx_init_late(void);
-void omap4430_init_late(void);
int omap2_common_pm_late_init(void);
#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
struct omap_hwmod;
extern int omap_dss_reset(struct omap_hwmod *);
+/* SoC specific clock initializer */
+extern int (*omap_clk_init)(void);
+
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
_omap3_noncore_dpll_bypass(clk);
/*
- * Set jitter correction. No jitter correction for OMAP4 and 3630
- * since freqsel field is no longer present
+ * Set jitter correction. Jitter correction applicable for OMAP343X
+ * only since freqsel field is no longer present on other devices.
*/
- if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
+ if (cpu_is_omap343x()) {
v = __raw_readl(dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
if (!dd)
return -EINVAL;
- __clk_prepare(dd->clk_bypass);
- clk_enable(dd->clk_bypass);
- __clk_prepare(dd->clk_ref);
- clk_enable(dd->clk_ref);
-
if (__clk_get_rate(dd->clk_bypass) == rate &&
(dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
pr_debug("%s: %s: set rate: entering bypass.\n",
__func__, __clk_get_name(hw->clk));
+ __clk_prepare(dd->clk_bypass);
+ clk_enable(dd->clk_bypass);
ret = _omap3_noncore_dpll_bypass(clk);
if (!ret)
new_parent = dd->clk_bypass;
+ clk_disable(dd->clk_bypass);
+ __clk_unprepare(dd->clk_bypass);
} else {
+ __clk_prepare(dd->clk_ref);
+ clk_enable(dd->clk_ref);
+
if (dd->last_rounded_rate != rate)
rate = __clk_round_rate(hw->clk, rate);
if (dd->last_rounded_rate == 0)
return -EINVAL;
- /* No freqsel on AM335x, OMAP4 and OMAP3630 */
- if (!soc_is_am33xx() && !cpu_is_omap44xx() &&
- !cpu_is_omap3630()) {
+ /* Freqsel is available only on OMAP343X devices */
+ if (cpu_is_omap343x()) {
freqsel = _omap3_dpll_compute_freqsel(clk,
dd->last_rounded_n);
WARN_ON(!freqsel);
ret = omap3_noncore_dpll_program(clk, freqsel);
if (!ret)
new_parent = dd->clk_ref;
+ clk_disable(dd->clk_ref);
+ __clk_unprepare(dd->clk_ref);
}
/*
* FIXME - this is all wrong. common code handles reparenting and
if (!ret)
__clk_reparent(hw->clk, new_parent);
- clk_disable(dd->clk_ref);
- __clk_unprepare(dd->clk_ref);
- clk_disable(dd->clk_bypass);
- __clk_unprepare(dd->clk_bypass);
-
return 0;
}
#include "control.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
-#ifdef CONFIG_BRIDGE_DVFS
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
#include "omap-pm.h"
#endif
static struct platform_device *omap_dsp_pdev;
static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
-#ifdef CONFIG_BRIDGE_DVFS
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
.dsp_set_min_opp = omap_pm_dsp_set_min_opp,
.dsp_get_opp = omap_pm_dsp_get_opp,
.cpu_set_freq = omap_pm_cpu_set_freq,
t.cs_wr_off = gpmc_t->cs_wr_off;
t.wr_cycle = gpmc_t->wr_cycle;
- /* Configure GPMC */
- if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1);
- else
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
- gpmc_cs_configure(gpmc_nand_data->cs,
- GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
if (err)
return err;
struct gpmc_timings *gpmc_t)
{
int err = 0;
+ struct gpmc_settings s;
struct device *dev = &gpmc_nand_device.dev;
+ memset(&s, 0, sizeof(struct gpmc_settings));
+
gpmc_nand_device.dev.platform_data = gpmc_nand_data;
err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
(unsigned long *)&gpmc_nand_resource[0].start);
if (err < 0) {
- dev_err(dev, "Cannot request GPMC CS\n");
+ dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
+ gpmc_nand_data->cs, err);
return err;
}
dev_err(dev, "Unable to set gpmc timings: %d\n", err);
return err;
}
- }
- /* Enable RD PIN Monitoring Reg */
- if (gpmc_nand_data->dev_ready) {
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
+ if (gpmc_nand_data->of_node) {
+ gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
+ } else {
+ s.device_nand = true;
+
+ /* Enable RD PIN Monitoring Reg */
+ if (gpmc_nand_data->dev_ready) {
+ s.wait_on_read = true;
+ s.wait_on_write = true;
+ }
+ }
+
+ if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
+ s.device_width = GPMC_DEVWIDTH_16BIT;
+ else
+ s.device_width = GPMC_DEVWIDTH_8BIT;
+
+ err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
+ if (err < 0)
+ goto out_free_cs;
+
+ err = gpmc_configure(GPMC_CONFIG_WP, 0);
+ if (err < 0)
+ goto out_free_cs;
}
gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
.resource = &gpmc_onenand_resource,
};
-static struct gpmc_timings omap2_onenand_calc_async_timings(void)
+static struct gpmc_settings onenand_async = {
+ .device_width = GPMC_DEVWIDTH_16BIT,
+ .mux_add_data = GPMC_MUX_AD,
+};
+
+static struct gpmc_settings onenand_sync = {
+ .burst_read = true,
+ .burst_wrap = true,
+ .burst_len = GPMC_BURST_16,
+ .device_width = GPMC_DEVWIDTH_16BIT,
+ .mux_add_data = GPMC_MUX_AD,
+ .wait_pin = 0,
+};
+
+static void omap2_onenand_calc_async_timings(struct gpmc_timings *t)
{
struct gpmc_device_timings dev_t;
- struct gpmc_timings t;
-
const int t_cer = 15;
const int t_avdp = 12;
const int t_aavdh = 7;
memset(&dev_t, 0, sizeof(dev_t));
- dev_t.mux = true;
dev_t.t_avdp_r = max_t(int, t_avdp, t_cer) * 1000;
dev_t.t_avdp_w = dev_t.t_avdp_r;
dev_t.t_aavdh = t_aavdh * 1000;
dev_t.t_wpl = t_wpl * 1000;
dev_t.t_wph = t_wph * 1000;
- gpmc_calc_timings(&t, &dev_t);
-
- return t;
-}
-
-static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
-{
- /* Configure GPMC for asynchronous read */
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_DEVICESIZE_16 |
- GPMC_CONFIG1_MUXADDDATA);
-
- return gpmc_cs_set_timings(cs, t);
+ gpmc_calc_timings(t, &onenand_async, &dev_t);
}
static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
return freq;
}
-static struct gpmc_timings
-omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
- int freq)
+static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t,
+ unsigned int flags,
+ int freq)
{
struct gpmc_device_timings dev_t;
- struct gpmc_timings t;
const int t_cer = 15;
const int t_avdp = 12;
const int t_cez = 20; /* max of t_cez, t_oez */
int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
int div, gpmc_clk_ns;
- if (cfg->flags & ONENAND_SYNC_READ)
+ if (flags & ONENAND_SYNC_READ)
onenand_flags = ONENAND_FLAG_SYNCREAD;
- else if (cfg->flags & ONENAND_SYNC_READWRITE)
+ else if (flags & ONENAND_SYNC_READWRITE)
onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE;
switch (freq) {
/* Set synchronous read timings */
memset(&dev_t, 0, sizeof(dev_t));
- dev_t.mux = true;
- dev_t.sync_read = true;
+ if (onenand_flags & ONENAND_FLAG_SYNCREAD)
+ onenand_sync.sync_read = true;
if (onenand_flags & ONENAND_FLAG_SYNCWRITE) {
- dev_t.sync_write = true;
+ onenand_sync.sync_write = true;
+ onenand_sync.burst_write = true;
} else {
dev_t.t_avdp_w = max(t_avdp, t_cer) * 1000;
dev_t.t_wpl = t_wpl * 1000;
dev_t.cyc_aavdh_oe = 1;
dev_t.t_rdyo = t_rdyo * 1000 + min_gpmc_clk_period;
- gpmc_calc_timings(&t, &dev_t);
-
- return t;
-}
-
-static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t)
-{
- unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD;
- unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE;
-
- /* Configure GPMC for synchronous read */
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_WRAPBURST_SUPP |
- GPMC_CONFIG1_READMULTIPLE_SUPP |
- (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
- (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
- (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
- GPMC_CONFIG1_PAGE_LEN(2) |
- (cpu_is_omap34xx() ? 0 :
- (GPMC_CONFIG1_WAIT_READ_MON |
- GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
- GPMC_CONFIG1_DEVICESIZE_16 |
- GPMC_CONFIG1_DEVICETYPE_NOR |
- GPMC_CONFIG1_MUXADDDATA);
-
- return gpmc_cs_set_timings(cs, t);
+ gpmc_calc_timings(t, &onenand_sync, &dev_t);
}
static int omap2_onenand_setup_async(void __iomem *onenand_base)
struct gpmc_timings t;
int ret;
+ if (gpmc_onenand_data->of_node)
+ gpmc_read_settings_dt(gpmc_onenand_data->of_node,
+ &onenand_async);
+
omap2_onenand_set_async_mode(onenand_base);
- t = omap2_onenand_calc_async_timings();
+ omap2_onenand_calc_async_timings(&t);
+
+ ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);
+ if (ret < 0)
+ return ret;
- ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
- if (IS_ERR_VALUE(ret))
+ ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
+ if (ret < 0)
return ret;
omap2_onenand_set_async_mode(onenand_base);
set_onenand_cfg(onenand_base);
}
- t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq);
+ if (gpmc_onenand_data->of_node) {
+ gpmc_read_settings_dt(gpmc_onenand_data->of_node,
+ &onenand_sync);
+ } else {
+ /*
+ * FIXME: Appears to be legacy code from initial ONENAND commit.
+ * Unclear what boards this is for and if this can be removed.
+ */
+ if (!cpu_is_omap34xx())
+ onenand_sync.wait_on_read = true;
+ }
+
+ omap2_onenand_calc_sync_timings(&t, gpmc_onenand_data->flags, freq);
- ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t);
- if (IS_ERR_VALUE(ret))
+ ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_sync);
+ if (ret < 0)
+ return ret;
+
+ ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
+ if (ret < 0)
return ret;
set_onenand_cfg(onenand_base);
void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
{
int err;
+ struct device *dev = &gpmc_onenand_device.dev;
gpmc_onenand_data = _onenand_data;
gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
if (cpu_is_omap24xx() &&
(gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
- printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+ dev_warn(dev, "OneNAND using only SYNC_READ on 24xx\n");
gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
}
err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
(unsigned long *)&gpmc_onenand_resource.start);
if (err < 0) {
- pr_err("%s: Cannot request GPMC CS\n", __func__);
+ dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
+ gpmc_onenand_data->cs, err);
return;
}
ONENAND_IO_SIZE - 1;
if (platform_device_register(&gpmc_onenand_device) < 0) {
- pr_err("%s: Unable to register OneNAND device\n", __func__);
+ dev_err(dev, "Unable to register OneNAND device\n");
gpmc_cs_free(gpmc_onenand_data->cs);
return;
}
.resource = gpmc_smc91x_resources,
};
+static struct gpmc_settings smc91x_settings = {
+ .device_width = GPMC_DEVWIDTH_16BIT,
+};
+
/*
* Set the gpmc timings for smc91c96. The timings are taken
* from the data sheet available at:
const int t7 = 5; /* Figure 12.4 write */
const int t8 = 5; /* Figure 12.4 write */
const int t20 = 185; /* Figure 12.2 read and 12.4 write */
- u32 l;
-
- l = GPMC_CONFIG1_DEVICESIZE_16;
- if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
- l |= GPMC_CONFIG1_MUXADDDATA;
- if (gpmc_cfg->flags & GPMC_READ_MON)
- l |= GPMC_CONFIG1_WAIT_READ_MON;
- if (gpmc_cfg->flags & GPMC_WRITE_MON)
- l |= GPMC_CONFIG1_WAIT_WRITE_MON;
- if (gpmc_cfg->wait_pin)
- l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
- gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
/*
* FIXME: Calculate the address and data bus muxed timings.
dev_t.t_cez_w = t4_w * 1000;
dev_t.t_wr_cycle = (t20 - t3) * 1000;
- gpmc_calc_timings(&t, &dev_t);
+ gpmc_calc_timings(&t, &smc91x_settings, &dev_t);
return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
}
gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+ if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+ smc91x_settings.mux_add_data = GPMC_MUX_AD;
+ if (gpmc_cfg->flags & GPMC_READ_MON)
+ smc91x_settings.wait_on_read = true;
+ if (gpmc_cfg->flags & GPMC_WRITE_MON)
+ smc91x_settings.wait_on_write = true;
+ if (gpmc_cfg->wait_pin)
+ smc91x_settings.wait_pin = gpmc_cfg->wait_pin;
+ ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings);
+ if (ret < 0)
+ goto free1;
+
if (gpmc_cfg->retime) {
ret = gpmc_cfg->retime();
if (ret != 0)
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_mtd.h>
#include <linux/of_device.h>
#include <linux/mtd/nand.h>
#define GPMC_CS_SIZE 0x30
#define GPMC_BCH_SIZE 0x10
-#define GPMC_MEM_START 0x00000000
#define GPMC_MEM_END 0x3FFFFFFF
-#define BOOT_ROM_SPACE 0x100000 /* 1MB */
#define GPMC_CHUNK_SHIFT 24 /* 16 MB */
#define GPMC_SECTION_SHIFT 28 /* 128 MB */
#define GPMC_HAS_WR_ACCESS 0x1
#define GPMC_HAS_WR_DATA_MUX_BUS 0x2
+#define GPMC_HAS_MUX_AAD 0x4
+
+#define GPMC_NR_WAITPINS 4
/* XXX: Only NAND irq has been considered,currently these are the only ones used
*/
static DEFINE_SPINLOCK(gpmc_mem_lock);
/* Define chip-selects as reserved by default until probe completes */
static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1);
+static unsigned int gpmc_nr_waitpins;
static struct device *gpmc_dev;
static int gpmc_irq;
static resource_size_t phys_base, mem_size;
__raw_writel(val, reg_addr);
}
-u32 gpmc_cs_read_reg(int cs, int idx)
+static u32 gpmc_cs_read_reg(int cs, int idx)
{
void __iomem *reg_addr;
}
/* TODO: Add support for gpmc_fck to clock framework and use it */
-unsigned long gpmc_get_fclk_period(void)
+static unsigned long gpmc_get_fclk_period(void)
{
unsigned long rate = clk_get_rate(gpmc_l3_clk);
return rate;
}
-unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+static unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
{
unsigned long tick_ps;
return (time_ns * 1000 + tick_ps - 1) / tick_ps;
}
-unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
+static unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
{
unsigned long tick_ps;
return ticks * gpmc_get_fclk_period() / 1000;
}
-unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns)
-{
- unsigned long ticks = gpmc_ns_to_ticks(time_ns);
-
- return ticks * gpmc_get_fclk_period() / 1000;
-}
-
static unsigned int gpmc_ticks_to_ps(unsigned int ticks)
{
return ticks * gpmc_get_fclk_period();
return 0;
}
-static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
+static int gpmc_cs_enable_mem(int cs, u32 base, u32 size)
{
u32 l;
u32 mask;
+ /*
+ * Ensure that base address is aligned on a
+ * boundary equal to or greater than size.
+ */
+ if (base & (size - 1))
+ return -EINVAL;
+
mask = (1 << GPMC_SECTION_SHIFT) - size;
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
l &= ~0x3f;
l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
l |= GPMC_CONFIG7_CSVALID;
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
+
+ return 0;
}
static void gpmc_cs_disable_mem(int cs)
return l & GPMC_CONFIG7_CSVALID;
}
-int gpmc_cs_set_reserved(int cs, int reserved)
+static void gpmc_cs_set_reserved(int cs, int reserved)
{
- if (cs > GPMC_CS_NUM)
- return -ENODEV;
-
gpmc_cs_map &= ~(1 << cs);
gpmc_cs_map |= (reserved ? 1 : 0) << cs;
-
- return 0;
}
-int gpmc_cs_reserved(int cs)
+static bool gpmc_cs_reserved(int cs)
{
- if (cs > GPMC_CS_NUM)
- return -ENODEV;
-
return gpmc_cs_map & (1 << cs);
}
return r;
}
+/**
+ * gpmc_cs_remap - remaps a chip-select physical base address
+ * @cs: chip-select to remap
+ * @base: physical base address to re-map chip-select to
+ *
+ * Re-maps a chip-select to a new physical base address specified by
+ * "base". Returns 0 on success and appropriate negative error code
+ * on failure.
+ */
+static int gpmc_cs_remap(int cs, u32 base)
+{
+ int ret;
+ u32 old_base, size;
+
+ if (cs > GPMC_CS_NUM)
+ return -ENODEV;
+ gpmc_cs_get_memconf(cs, &old_base, &size);
+ if (base == old_base)
+ return 0;
+ gpmc_cs_disable_mem(cs);
+ ret = gpmc_cs_delete_mem(cs);
+ if (ret < 0)
+ return ret;
+ ret = gpmc_cs_insert_mem(cs, base, size);
+ if (ret < 0)
+ return ret;
+ ret = gpmc_cs_enable_mem(cs, base, size);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
{
struct resource *res = &gpmc_cs_mem[cs];
if (r < 0)
goto out;
- gpmc_cs_enable_mem(cs, res->start, resource_size(res));
+ r = gpmc_cs_enable_mem(cs, res->start, resource_size(res));
+ if (r < 0) {
+ release_resource(res);
+ goto out;
+ }
+
*base = res->start;
gpmc_cs_set_reserved(cs, 1);
out:
EXPORT_SYMBOL(gpmc_cs_free);
/**
- * gpmc_cs_configure - write request to configure gpmc
- * @cs: chip select number
+ * gpmc_configure - write request to configure gpmc
* @cmd: command type
* @wval: value to write
* @return status of the operation
*/
-int gpmc_cs_configure(int cs, int cmd, int wval)
+int gpmc_configure(int cmd, int wval)
{
- int err = 0;
- u32 regval = 0;
+ u32 regval;
switch (cmd) {
case GPMC_ENABLE_IRQ:
gpmc_write_reg(GPMC_CONFIG, regval);
break;
- case GPMC_CONFIG_RDY_BSY:
- regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
- if (wval)
- regval |= WR_RD_PIN_MONITORING;
- else
- regval &= ~WR_RD_PIN_MONITORING;
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
- break;
-
- case GPMC_CONFIG_DEV_SIZE:
- regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- /* clear 2 target bits */
- regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
-
- /* set the proper value */
- regval |= GPMC_CONFIG1_DEVICESIZE(wval);
-
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
- break;
-
- case GPMC_CONFIG_DEV_TYPE:
- regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
- regval |= GPMC_CONFIG1_DEVICETYPE(wval);
- if (wval == GPMC_DEVICETYPE_NOR)
- regval |= GPMC_CONFIG1_MUXADDDATA;
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
- break;
-
default:
- printk(KERN_ERR "gpmc_configure_cs: Not supported\n");
- err = -EINVAL;
+ pr_err("%s: command not supported\n", __func__);
+ return -EINVAL;
}
- return err;
+ return 0;
}
-EXPORT_SYMBOL(gpmc_cs_configure);
+EXPORT_SYMBOL(gpmc_configure);
void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
{
return -EINVAL;
gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
- if (IS_ERR_VALUE(gpmc_irq_start)) {
+ if (gpmc_irq_start < 0) {
pr_err("irq_alloc_descs failed\n");
return gpmc_irq_start;
}
}
-static int gpmc_mem_init(void)
+static void gpmc_mem_init(void)
{
- int cs, rc;
- unsigned long boot_rom_space = 0;
+ int cs;
- /* never allocate the first page, to facilitate bug detection;
- * even if we didn't boot from ROM.
+ /*
+ * The first 1MB of GPMC address space is typically mapped to
+ * the internal ROM. Never allocate the first page, to
+ * facilitate bug detection; even if we didn't boot from ROM.
*/
- boot_rom_space = BOOT_ROM_SPACE;
- gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space;
+ gpmc_mem_root.start = SZ_1M;
gpmc_mem_root.end = GPMC_MEM_END;
/* Reserve all regions that has been set up by bootloader */
if (!gpmc_cs_mem_enabled(cs))
continue;
gpmc_cs_get_memconf(cs, &base, &size);
- rc = gpmc_cs_insert_mem(cs, base, size);
- if (IS_ERR_VALUE(rc)) {
- while (--cs >= 0)
- if (gpmc_cs_mem_enabled(cs))
- gpmc_cs_delete_mem(cs);
- return rc;
+ if (gpmc_cs_insert_mem(cs, base, size)) {
+ pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n",
+ __func__, cs, base, base + size);
+ gpmc_cs_disable_mem(cs);
}
}
-
- return 0;
}
static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk)
/* XXX: can the cycles be avoided ? */
static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool mux)
{
- bool mux = dev_t->mux;
u32 temp;
/* adv_rd_off */
}
static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool mux)
{
- bool mux = dev_t->mux;
u32 temp;
/* adv_wr_off */
}
static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool mux)
{
- bool mux = dev_t->mux;
u32 temp;
/* adv_rd_off */
}
static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool mux)
{
- bool mux = dev_t->mux;
u32 temp;
/* adv_wr_off */
}
static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool sync)
{
u32 temp;
gpmc_t->cs_on + dev_t->t_ce_avd);
gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp);
- if (dev_t->sync_write || dev_t->sync_read)
+ if (sync)
gpmc_calc_sync_common_timings(gpmc_t, dev_t);
return 0;
}
int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_settings *gpmc_s,
+ struct gpmc_device_timings *dev_t)
{
+ bool mux = false, sync = false;
+
+ if (gpmc_s) {
+ mux = gpmc_s->mux_add_data ? true : false;
+ sync = (gpmc_s->sync_read || gpmc_s->sync_write);
+ }
+
memset(gpmc_t, 0, sizeof(*gpmc_t));
- gpmc_calc_common_timings(gpmc_t, dev_t);
+ gpmc_calc_common_timings(gpmc_t, dev_t, sync);
- if (dev_t->sync_read)
- gpmc_calc_sync_read_timings(gpmc_t, dev_t);
+ if (gpmc_s && gpmc_s->sync_read)
+ gpmc_calc_sync_read_timings(gpmc_t, dev_t, mux);
else
- gpmc_calc_async_read_timings(gpmc_t, dev_t);
+ gpmc_calc_async_read_timings(gpmc_t, dev_t, mux);
- if (dev_t->sync_write)
- gpmc_calc_sync_write_timings(gpmc_t, dev_t);
+ if (gpmc_s && gpmc_s->sync_write)
+ gpmc_calc_sync_write_timings(gpmc_t, dev_t, mux);
else
- gpmc_calc_async_write_timings(gpmc_t, dev_t);
+ gpmc_calc_async_write_timings(gpmc_t, dev_t, mux);
/* TODO: remove, see function definition */
gpmc_convert_ps_to_ns(gpmc_t);
- /* Now the GPMC is initialised, unreserve the chip-selects */
- gpmc_cs_map = 0;
+ return 0;
+}
+
+/**
+ * gpmc_cs_program_settings - programs non-timing related settings
+ * @cs: GPMC chip-select to program
+ * @p: pointer to GPMC settings structure
+ *
+ * Programs non-timing related settings for a GPMC chip-select, such as
+ * bus-width, burst configuration, etc. Function should be called once
+ * for each chip-select that is being used and must be called before
+ * calling gpmc_cs_set_timings() as timing parameters in the CONFIG1
+ * register will be initialised to zero by this function. Returns 0 on
+ * success and appropriate negative error code on failure.
+ */
+int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
+{
+ u32 config1;
+
+ if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) {
+ pr_err("%s: invalid width %d!", __func__, p->device_width);
+ return -EINVAL;
+ }
+
+ /* Address-data multiplexing not supported for NAND devices */
+ if (p->device_nand && p->mux_add_data) {
+ pr_err("%s: invalid configuration!\n", __func__);
+ return -EINVAL;
+ }
+
+ if ((p->mux_add_data > GPMC_MUX_AD) ||
+ ((p->mux_add_data == GPMC_MUX_AAD) &&
+ !(gpmc_capability & GPMC_HAS_MUX_AAD))) {
+ pr_err("%s: invalid multiplex configuration!\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Page/burst mode supports lengths of 4, 8 and 16 bytes */
+ if (p->burst_read || p->burst_write) {
+ switch (p->burst_len) {
+ case GPMC_BURST_4:
+ case GPMC_BURST_8:
+ case GPMC_BURST_16:
+ break;
+ default:
+ pr_err("%s: invalid page/burst-length (%d)\n",
+ __func__, p->burst_len);
+ return -EINVAL;
+ }
+ }
+
+ if ((p->wait_on_read || p->wait_on_write) &&
+ (p->wait_pin > gpmc_nr_waitpins)) {
+ pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin);
+ return -EINVAL;
+ }
+
+ config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1));
+
+ if (p->sync_read)
+ config1 |= GPMC_CONFIG1_READTYPE_SYNC;
+ if (p->sync_write)
+ config1 |= GPMC_CONFIG1_WRITETYPE_SYNC;
+ if (p->wait_on_read)
+ config1 |= GPMC_CONFIG1_WAIT_READ_MON;
+ if (p->wait_on_write)
+ config1 |= GPMC_CONFIG1_WAIT_WRITE_MON;
+ if (p->wait_on_read || p->wait_on_write)
+ config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin);
+ if (p->device_nand)
+ config1 |= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND);
+ if (p->mux_add_data)
+ config1 |= GPMC_CONFIG1_MUXTYPE(p->mux_add_data);
+ if (p->burst_read)
+ config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP;
+ if (p->burst_write)
+ config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP;
+ if (p->burst_read || p->burst_write) {
+ config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3);
+ config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0;
+ }
+
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1);
return 0;
}
};
MODULE_DEVICE_TABLE(of, gpmc_dt_ids);
+/**
+ * gpmc_read_settings_dt - read gpmc settings from device-tree
+ * @np: pointer to device-tree node for a gpmc child device
+ * @p: pointer to gpmc settings structure
+ *
+ * Reads the GPMC settings for a GPMC child device from device-tree and
+ * stores them in the GPMC settings structure passed. The GPMC settings
+ * structure is initialised to zero by this function and so any
+ * previously stored settings will be cleared.
+ */
+void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
+{
+ memset(p, 0, sizeof(struct gpmc_settings));
+
+ p->sync_read = of_property_read_bool(np, "gpmc,sync-read");
+ p->sync_write = of_property_read_bool(np, "gpmc,sync-write");
+ p->device_nand = of_property_read_bool(np, "gpmc,device-nand");
+ of_property_read_u32(np, "gpmc,device-width", &p->device_width);
+ of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data);
+
+ if (!of_property_read_u32(np, "gpmc,burst-length", &p->burst_len)) {
+ p->burst_wrap = of_property_read_bool(np, "gpmc,burst-wrap");
+ p->burst_read = of_property_read_bool(np, "gpmc,burst-read");
+ p->burst_write = of_property_read_bool(np, "gpmc,burst-write");
+ if (!p->burst_read && !p->burst_write)
+ pr_warn("%s: page/burst-length set but not used!\n",
+ __func__);
+ }
+
+ if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) {
+ p->wait_on_read = of_property_read_bool(np,
+ "gpmc,wait-on-read");
+ p->wait_on_write = of_property_read_bool(np,
+ "gpmc,wait-on-write");
+ if (!p->wait_on_read && !p->wait_on_write)
+ pr_warn("%s: read/write wait monitoring not enabled!\n",
+ __func__);
+ }
+}
+
static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
struct gpmc_timings *gpmc_t)
{
- u32 val;
+ struct gpmc_bool_timings *p;
+
+ if (!np || !gpmc_t)
+ return;
memset(gpmc_t, 0, sizeof(*gpmc_t));
/* minimum clock period for syncronous mode */
- if (!of_property_read_u32(np, "gpmc,sync-clk", &val))
- gpmc_t->sync_clk = val;
+ of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk);
/* chip select timtings */
- if (!of_property_read_u32(np, "gpmc,cs-on", &val))
- gpmc_t->cs_on = val;
-
- if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val))
- gpmc_t->cs_rd_off = val;
-
- if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val))
- gpmc_t->cs_wr_off = val;
+ of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on);
+ of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off);
+ of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off);
/* ADV signal timings */
- if (!of_property_read_u32(np, "gpmc,adv-on", &val))
- gpmc_t->adv_on = val;
-
- if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val))
- gpmc_t->adv_rd_off = val;
-
- if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val))
- gpmc_t->adv_wr_off = val;
+ of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on);
+ of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off);
+ of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off);
/* WE signal timings */
- if (!of_property_read_u32(np, "gpmc,we-on", &val))
- gpmc_t->we_on = val;
-
- if (!of_property_read_u32(np, "gpmc,we-off", &val))
- gpmc_t->we_off = val;
+ of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on);
+ of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off);
/* OE signal timings */
- if (!of_property_read_u32(np, "gpmc,oe-on", &val))
- gpmc_t->oe_on = val;
-
- if (!of_property_read_u32(np, "gpmc,oe-off", &val))
- gpmc_t->oe_off = val;
+ of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on);
+ of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off);
/* access and cycle timings */
- if (!of_property_read_u32(np, "gpmc,page-burst-access", &val))
- gpmc_t->page_burst_access = val;
-
- if (!of_property_read_u32(np, "gpmc,access", &val))
- gpmc_t->access = val;
-
- if (!of_property_read_u32(np, "gpmc,rd-cycle", &val))
- gpmc_t->rd_cycle = val;
-
- if (!of_property_read_u32(np, "gpmc,wr-cycle", &val))
- gpmc_t->wr_cycle = val;
-
- /* only for OMAP3430 */
- if (!of_property_read_u32(np, "gpmc,wr-access", &val))
- gpmc_t->wr_access = val;
-
- if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val))
- gpmc_t->wr_data_mux_bus = val;
+ of_property_read_u32(np, "gpmc,page-burst-access-ns",
+ &gpmc_t->page_burst_access);
+ of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access);
+ of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle);
+ of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle);
+ of_property_read_u32(np, "gpmc,bus-turnaround-ns",
+ &gpmc_t->bus_turnaround);
+ of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns",
+ &gpmc_t->cycle2cycle_delay);
+ of_property_read_u32(np, "gpmc,wait-monitoring-ns",
+ &gpmc_t->wait_monitoring);
+ of_property_read_u32(np, "gpmc,clk-activation-ns",
+ &gpmc_t->clk_activation);
+
+ /* only applicable to OMAP3+ */
+ of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access);
+ of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns",
+ &gpmc_t->wr_data_mux_bus);
+
+ /* bool timing parameters */
+ p = &gpmc_t->bool_timings;
+
+ p->cycle2cyclediffcsen =
+ of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen");
+ p->cycle2cyclesamecsen =
+ of_property_read_bool(np, "gpmc,cycle2cycle-samecsen");
+ p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay");
+ p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay");
+ p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay");
+ p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay");
+ p->time_para_granularity =
+ of_property_read_bool(np, "gpmc,time-para-granularity");
}
#ifdef CONFIG_MTD_NAND
}
#endif
+/**
+ * gpmc_probe_generic_child - configures the gpmc for a child device
+ * @pdev: pointer to gpmc platform device
+ * @child: pointer to device-tree node for child device
+ *
+ * Allocates and configures a GPMC chip-select for a child device.
+ * Returns 0 on success and appropriate negative error code on failure.
+ */
+static int gpmc_probe_generic_child(struct platform_device *pdev,
+ struct device_node *child)
+{
+ struct gpmc_settings gpmc_s;
+ struct gpmc_timings gpmc_t;
+ struct resource res;
+ unsigned long base;
+ int ret, cs;
+
+ if (of_property_read_u32(child, "reg", &cs) < 0) {
+ dev_err(&pdev->dev, "%s has no 'reg' property\n",
+ child->full_name);
+ return -ENODEV;
+ }
+
+ if (of_address_to_resource(child, 0, &res) < 0) {
+ dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
+ child->full_name);
+ return -ENODEV;
+ }
+
+ ret = gpmc_cs_request(cs, resource_size(&res), &base);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
+ return ret;
+ }
+
+ /*
+ * FIXME: gpmc_cs_request() will map the CS to an arbitary
+ * location in the gpmc address space. When booting with
+ * device-tree we want the NOR flash to be mapped to the
+ * location specified in the device-tree blob. So remap the
+ * CS to this location. Once DT migration is complete should
+ * just make gpmc_cs_request() map a specific address.
+ */
+ ret = gpmc_cs_remap(cs, res.start);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n",
+ cs, res.start);
+ goto err;
+ }
+
+ gpmc_read_settings_dt(child, &gpmc_s);
+
+ ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width);
+ if (ret < 0)
+ goto err;
+
+ ret = gpmc_cs_program_settings(cs, &gpmc_s);
+ if (ret < 0)
+ goto err;
+
+ gpmc_read_timings_dt(child, &gpmc_t);
+ gpmc_cs_set_timings(cs, &gpmc_t);
+
+ if (of_platform_device_create(child, NULL, &pdev->dev))
+ return 0;
+
+ dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
+ ret = -ENODEV;
+
+err:
+ gpmc_cs_free(cs);
+
+ return ret;
+}
+
static int gpmc_probe_dt(struct platform_device *pdev)
{
int ret;
if (!of_id)
return 0;
+ ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins",
+ &gpmc_nr_waitpins);
+ if (ret < 0) {
+ pr_err("%s: number of wait pins not found!\n", __func__);
+ return ret;
+ }
+
for_each_node_by_name(child, "nand") {
ret = gpmc_probe_nand_child(pdev, child);
if (ret < 0) {
return ret;
}
}
+
+ for_each_node_by_name(child, "nor") {
+ ret = gpmc_probe_generic_child(pdev, child);
+ if (ret < 0) {
+ of_node_put(child);
+ return ret;
+ }
+ }
+
+ for_each_node_by_name(child, "ethernet") {
+ ret = gpmc_probe_generic_child(pdev, child);
+ if (ret < 0) {
+ of_node_put(child);
+ return ret;
+ }
+ }
+
return 0;
}
#else
gpmc_dev = &pdev->dev;
l = gpmc_read_reg(GPMC_REVISION);
+
+ /*
+ * FIXME: Once device-tree migration is complete the below flags
+ * should be populated based upon the device-tree compatible
+ * string. For now just use the IP revision. OMAP3+ devices have
+ * the wr_access and wr_data_mux_bus register fields. OMAP4+
+ * devices support the addr-addr-data multiplex protocol.
+ *
+ * GPMC IP revisions:
+ * - OMAP24xx = 2.0
+ * - OMAP3xxx = 5.0
+ * - OMAP44xx/54xx/AM335x = 6.0
+ */
if (GPMC_REVISION_MAJOR(l) > 0x4)
gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS;
+ if (GPMC_REVISION_MAJOR(l) > 0x5)
+ gpmc_capability |= GPMC_HAS_MUX_AAD;
dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
GPMC_REVISION_MINOR(l));
- rc = gpmc_mem_init();
- if (IS_ERR_VALUE(rc)) {
- clk_disable_unprepare(gpmc_l3_clk);
- clk_put(gpmc_l3_clk);
- dev_err(gpmc_dev, "failed to reserve memory\n");
- return rc;
- }
+ gpmc_mem_init();
- if (IS_ERR_VALUE(gpmc_setup_irq()))
+ if (gpmc_setup_irq() < 0)
dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
+ /* Now the GPMC is initialised, unreserve the chip-selects */
+ gpmc_cs_map = 0;
+
+ if (!pdev->dev.of_node)
+ gpmc_nr_waitpins = GPMC_NR_WAITPINS;
+
rc = gpmc_probe_dt(pdev);
if (rc < 0) {
clk_disable_unprepare(gpmc_l3_clk);
#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_MUXADDDATA (1 << 9)
+#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8)
#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))
#define GPMC_IRQ_FIFOEVENTENABLE 0x01
#define GPMC_IRQ_COUNT_EVENT 0x02
+#define GPMC_BURST_4 4 /* 4 word burst */
+#define GPMC_BURST_8 8 /* 8 word burst */
+#define GPMC_BURST_16 16 /* 16 word burst */
+#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */
+#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */
+#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */
+#define GPMC_MUX_AD 2 /* Addr-Data multiplex */
/* bool type time settings */
struct gpmc_bool_timings {
u8 cyc_wpl; /* write deassertion time in cycles */
u32 cyc_iaa; /* initial access time in cycles */
- bool mux; /* address & data muxed */
- bool sync_write;/* synchronous write */
- bool sync_read; /* synchronous read */
-
/* extra delays */
bool ce_xdelay;
bool avd_xdelay;
bool we_xdelay;
};
+struct gpmc_settings {
+ bool burst_wrap; /* enables wrap bursting */
+ bool burst_read; /* enables read page/burst mode */
+ bool burst_write; /* enables write page/burst mode */
+ bool device_nand; /* device is NAND */
+ bool sync_read; /* enables synchronous reads */
+ bool sync_write; /* enables synchronous writes */
+ bool wait_on_read; /* monitor wait on reads */
+ bool wait_on_write; /* monitor wait on writes */
+ u32 burst_len; /* page/burst length */
+ u32 device_width; /* device bus width (8 or 16 bit) */
+ u32 mux_add_data; /* multiplex address & data */
+ u32 wait_pin; /* wait-pin to be used */
+};
+
extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t);
+ struct gpmc_settings *gpmc_s,
+ struct gpmc_device_timings *dev_t);
extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
extern int gpmc_get_client_irq(unsigned irq_config);
-extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
-extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
-extern unsigned long gpmc_get_fclk_period(void);
extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern u32 gpmc_cs_read_reg(int cs, int idx);
extern int gpmc_calc_divider(unsigned int sync_clk);
extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
extern void gpmc_cs_free(int cs);
-extern int gpmc_cs_set_reserved(int cs, int reserved);
-extern int gpmc_cs_reserved(int cs);
extern void omap3_gpmc_save_context(void);
extern void omap3_gpmc_restore_context(void);
-extern int gpmc_cs_configure(int cs, int cmd, int wval);
+extern int gpmc_configure(int cmd, int wval);
+extern void gpmc_read_settings_dt(struct device_node *np,
+ struct gpmc_settings *p);
#endif
case 0xb942:
switch (rev) {
case 0:
- default:
omap_revision = OMAP5430_REV_ES1_0;
+ break;
+ case 1:
+ default:
+ omap_revision = OMAP5430_REV_ES2_0;
}
break;
case 0xb998:
switch (rev) {
case 0:
- default:
omap_revision = OMAP5432_REV_ES1_0;
+ break;
+ case 1:
+ default:
+ omap_revision = OMAP5432_REV_ES2_0;
}
break;
default:
/* Unknown default to latest silicon rev as default*/
- omap_revision = OMAP5430_REV_ES1_0;
+ omap_revision = OMAP5430_REV_ES2_0;
}
pr_info("OMAP%04x ES%d.0\n",
#include "prm3xxx.h"
#include "prm44xx.h"
+/*
+ * omap_clk_init: points to a function that does the SoC-specific
+ * clock initializations
+ */
+int (*omap_clk_init)(void);
+
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
.length = L4_PER_54XX_SIZE,
.type = MT_DEVICE,
},
+#ifdef CONFIG_OMAP4_ERRATA_I688
+ {
+ .virtual = OMAP4_SRAM_VA,
+ .pfn = __phys_to_pfn(OMAP4_SRAM_PA),
+ .length = PAGE_SIZE,
+ .type = MT_MEMORY_SO,
+ },
+#endif
};
#endif
void __init omap5_map_io(void)
{
iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
+ omap_barriers_init();
}
#endif
/*
omap242x_clockdomains_init();
omap2420_hwmod_init();
omap_hwmod_init_postsetup();
- omap2420_clk_init();
+ omap_clk_init = omap2420_clk_init;
}
void __init omap2420_init_late(void)
omap243x_clockdomains_init();
omap2430_hwmod_init();
omap_hwmod_init_postsetup();
- omap2430_clk_init();
+ omap_clk_init = omap2430_clk_init;
}
void __init omap2430_init_late(void)
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
- omap3xxx_clk_init();
+ omap_clk_init = omap3xxx_clk_init;
}
void __init omap3430_init_early(void)
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
- omap3xxx_clk_init();
+ omap_clk_init = omap3xxx_clk_init;
}
void __init omap3_init_late(void)
am33xx_clockdomains_init();
am33xx_hwmod_init();
omap_hwmod_init_postsetup();
- am33xx_clk_init();
+ omap_clk_init = am33xx_clk_init;
}
#endif
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
omap_hwmod_init_postsetup();
- omap4xxx_clk_init();
+ omap_clk_init = omap4xxx_clk_init;
}
void __init omap4430_init_late(void)
return -EINVAL;
}
- pr_err("%s: Could not find signal %s\n", __func__, muxname);
-
return -ENODEV;
}
return mux_mode;
}
+ pr_err("%s: Could not find signal %s\n", __func__, muxname);
+
return -ENODEV;
}
list_for_each_entry(e, &partition->muxmodes, node) {
struct omap_mux *m = &e->mux;
- (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir,
- m, &omap_mux_dbg_signal_fops);
+ (void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO,
+ mux_dbg_dir, m,
+ &omap_mux_dbg_signal_fops);
}
}
*/
static int __init omap4_sar_ram_init(void)
{
+ unsigned long sar_base;
+
/*
* To avoid code running on other OMAPs in
* multi-omap builds
*/
- if (!cpu_is_omap44xx())
+ if (cpu_is_omap44xx())
+ sar_base = OMAP44XX_SAR_RAM_BASE;
+ else if (soc_is_omap54xx())
+ sar_base = OMAP54XX_SAR_RAM_BASE;
+ else
return -ENOMEM;
/* Static mapping, never released */
- sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K);
+ sar_ram_base = ioremap(sar_base, SZ_16K);
if (WARN_ON(!sar_ram_base))
return -ENOMEM;
#define SAR_BACKUP_STATUS_WAKEUPGEN 0x10
/* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */
-#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8d4)
-#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8e8)
-#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x8fc)
-#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x910)
-#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x924)
-#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x928)
-#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0x92c)
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9dc)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9f0)
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa04)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa18)
+#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0xa2c)
+#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x930)
+#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0xa34)
#define OMAP5_SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x800)
#endif
#define OMAP54XX_PRCM_MPU_BASE 0x48243000
#define OMAP54XX_SCM_BASE 0x4a002000
#define OMAP54XX_CTRL_BASE 0x4a002800
+#define OMAP54XX_SAR_RAM_BASE 0x4ae26000
#endif /* __ASM_SOC_OMAP555554XX_H */
int oh_cnt, i, ret = 0;
oh_cnt = of_property_count_strings(node, "ti,hwmods");
- if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
+ if (oh_cnt <= 0) {
dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n");
return -ENODEV;
}
}
oh = omap_hwmod_lookup(oh_name);
- if (IS_ERR_OR_NULL(oh)) {
+ if (!oh) {
WARN(1, "%s: no hwmod for %s\n", __func__,
oh_name);
- return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
+ return ERR_PTR(-ENODEV);
}
- if (IS_ERR_OR_NULL(oh->od)) {
+ if (!oh->od) {
WARN(1, "%s: no omap_device for %s\n", __func__,
oh_name);
- return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
+ return ERR_PTR(-ENODEV);
}
- if (IS_ERR_OR_NULL(oh->od->pdev))
- return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
-
return &oh->od->pdev->dev;
}
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
- oh->_int_flags |= _HWMOD_WAKEUP_ENABLED;
-
return 0;
}
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
- oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED;
-
return 0;
}
}
if (sf & SYSC_HAS_MIDLEMODE) {
- if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+ if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
idlemode = HWMOD_IDLEMODE_NO;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
}
if (sf & SYSC_HAS_MIDLEMODE) {
- if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+ if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
+ (oh->flags & HWMOD_FORCE_MSTANDBY)) {
idlemode = HWMOD_IDLEMODE_FORCE;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
return -ENOSYS;
ret = _lookup_hardreset(oh, name, &ohri);
- if (IS_ERR_VALUE(ret))
+ if (ret < 0)
return ret;
if (oh->clkdm) {
_init_mpu_rt_base(oh, NULL);
r = _init_clocks(oh, NULL);
- if (IS_ERR_VALUE(r)) {
+ if (r < 0) {
WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name);
return -EINVAL;
}
*
* HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
* of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- * of standby, rather than relying on module smart-standby
+ * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
+ * out of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
* SDRAM controller, etc. XXX probably belongs outside the main hwmod file
* XXX Should be HWMOD_SETUP_NO_RESET
* correctly, or this is being abused to deal with some PM latency
* issues -- but we're currently suffering from a shortage of
* folks who are able to track these issues down properly.
+ * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
+ * is kept in force-standby mode. Failing to do so causes PM problems
+ * with musb on OMAP3630 at least. Note that musb has a dedicated register
+ * to control MSTANDBY signal when MIDLEMODE is set to force-standby.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
#define HWMOD_16BIT_REG (1 << 8)
#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
#define HWMOD_BLOCK_WFI (1 << 10)
+#define HWMOD_FORCE_MSTANDBY (1 << 11)
/*
* omap_hwmod._int_flags definitions
* These are for internal use only and are managed by the omap_hwmod code.
*
* _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
- * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
* _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
* _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
* causes the first call to _enable() to only update the pinmux
*/
#define _HWMOD_NO_MPU_PORT (1 << 0)
-#define _HWMOD_WAKEUP_ENABLED (1 << 1)
-#define _HWMOD_SYSCONFIG_LOADED (1 << 2)
-#define _HWMOD_SKIP_ENABLE (1 << 3)
+#define _HWMOD_SYSCONFIG_LOADED (1 << 1)
+#define _HWMOD_SKIP_ENABLE (1 << 2)
/*
* omap_hwmod._state definitions
#include "prm-regbits-33xx.h"
#include "i2c.h"
#include "mmc.h"
+#include "wd_timer.h"
/*
* IP blocks
};
/* 'wd_timer' class */
+static struct omap_hwmod_class_sysconfig wdt_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x10,
+ .syss_offs = 0x14,
+ .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
.name = "wd_timer",
+ .sysc = &wdt_sysc,
+ .pre_shutdown = &omap2_wd_timer_disable,
};
/*
.name = "wd_timer2",
.class = &am33xx_wd_timer_hwmod_class,
.clkdm_name = "l4_wkup_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE,
.main_clk = "wdt1_fck",
.prcm = {
.omap4 = {
* Erratum ID: i479 idle_req / idle_ack mechanism potentially
* broken when autoidle is enabled
* workaround is to disable the autoidle bit at module level.
+ *
+ * Enabling the device in any other MIDLEMODE setting but force-idle
+ * causes core_pwrdm not enter idle states at least on OMAP3630.
+ * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
+ * signal when MIDLEMODE is set to force-idle.
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
- | HWMOD_SWSUP_MSTANDBY,
+ | HWMOD_FORCE_MSTANDBY,
};
/* usb_otg_hs */
{ }
};
+static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
+ { .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
+};
+
/* ocp2scp_usb_phy */
static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.name = "ocp2scp_usb_phy",
},
},
.dev_attr = ocp2scp_dev_attr,
+ .opt_clks = ocp2scp_usb_phy_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
};
/*
return 0;
d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir);
- if (!(IS_ERR_OR_NULL(d)))
+ if (d)
(void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d,
(void *)pwrdm, &pwrdm_suspend_fops);
return 0;
d = debugfs_create_dir("pm_debug", NULL);
- if (IS_ERR_OR_NULL(d))
- return PTR_ERR(d);
+ if (!d)
+ return -EINVAL;
(void) debugfs_create_file("count", S_IRUGO,
d, (void *)DEBUG_FILE_COUNTERS, &debug_fops);
#define ALREADYACTIVE_SWITCH 0
#define FORCEWAKEUP_SWITCH 1
#define LOWPOWERSTATE_SWITCH 2
-#define ERROR_SWITCH 3
/* pwrdm_list contains all registered struct powerdomains */
static LIST_HEAD(pwrdm_list);
{
u8 sleep_switch;
- if (curr_pwrst < 0) {
- WARN_ON(1);
- sleep_switch = ERROR_SWITCH;
- } else if (curr_pwrst < PWRDM_POWER_ON) {
+ if (curr_pwrst < PWRDM_POWER_ON) {
if (curr_pwrst > pwrst &&
pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE &&
arch_pwrdm->pwrdm_set_lowpwrstchange) {
*/
int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
{
- u8 curr_pwrst, next_pwrst, sleep_switch;
+ u8 next_pwrst, sleep_switch;
+ int curr_pwrst;
int ret = 0;
bool hwsup = false;
pwrdm_lock(pwrdm);
curr_pwrst = pwrdm_read_pwrst(pwrdm);
+ if (curr_pwrst < 0) {
+ ret = -EINVAL;
+ goto osps_out;
+ }
+
next_pwrst = pwrdm_read_next_pwrst(pwrdm);
if (curr_pwrst == pwrst && next_pwrst == pwrst)
goto osps_out;
sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst,
pwrst, &hwsup);
- if (sleep_switch == ERROR_SWITCH) {
- ret = -EINVAL;
- goto osps_out;
- }
ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
if (ret)
{
int i;
- if (IS_ERR_OR_NULL(pwrdm)) {
+ if (!pwrdm) {
pr_debug("powerdomain: %s: invalid powerdomain pointer\n",
__func__);
return 1;
/* Read a register in a CM/PRM instance in the PRM module */
u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
{
- return __raw_readl(OMAP44XX_PRM_REGADDR(inst, reg));
+ return __raw_readl(prm_base + inst + reg);
}
/* Write into a register in a CM/PRM instance in the PRM module */
void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
{
- __raw_writel(val, OMAP44XX_PRM_REGADDR(inst, reg));
+ __raw_writel(val, prm_base + inst + reg);
}
/* Read-modify-write a register in a PRM module. Caller must lock */
int __init omap44xx_prm_init(void)
{
- if (!cpu_is_omap44xx())
+ if (!cpu_is_omap44xx() && !soc_is_omap54xx())
return 0;
return prm_register(&omap44xx_prm_ll_data);
#define OMAP54XX_CLASS 0x54000054
#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8))
#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8))
void omap2xxx_check_revision(void);
void omap3xxx_check_revision(void);
#include "common.h"
#include "powerdomain.h"
-/* Parent clocks, eventually these will come from the clock framework */
-
-#define OMAP2_MPU_SOURCE "sys_ck"
-#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE
-#define OMAP4_MPU_SOURCE "sys_clkin_ck"
-#define OMAP2_32K_SOURCE "func_32k_ck"
-#define OMAP3_32K_SOURCE "omap_32k_fck"
-#define OMAP4_32K_SOURCE "sys_32k_ck"
-
#define REALTIME_COUNTER_BASE 0x48243200
#define INCREMENTER_NUMERATOR_OFFSET 0x10
#define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14
}
static struct clock_event_device clockevent_gpt = {
- .name = "gp_timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.rating = 300,
.set_next_event = omap2_gp_timer_set_next_event,
if (property && !of_get_property(np, property, NULL))
continue;
+ if (!property && (of_get_property(np, "ti,timer-alwon", NULL) ||
+ of_get_property(np, "ti,timer-dsp", NULL) ||
+ of_get_property(np, "ti,timer-pwm", NULL) ||
+ of_get_property(np, "ti,timer-secure", NULL)))
+ continue;
+
of_add_property(np, &device_disabled);
return np;
}
}
static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
- int gptimer_id,
- const char *fck_source,
- const char *property,
- int posted)
+ const char *fck_source,
+ const char *property,
+ const char **timer_name,
+ int posted)
{
char name[10]; /* 10 = sizeof("gptXX_Xck0") */
const char *oh_name;
struct device_node *np;
struct omap_hwmod *oh;
struct resource irq, mem;
+ struct clk *src;
int r = 0;
if (of_have_populated_dt()) {
of_node_put(np);
} else {
- if (omap_dm_timer_reserve_systimer(gptimer_id))
+ if (omap_dm_timer_reserve_systimer(timer->id))
return -ENODEV;
- sprintf(name, "timer%d", gptimer_id);
+ sprintf(name, "timer%d", timer->id);
oh_name = name;
}
if (!oh)
return -ENODEV;
+ *timer_name = oh->name;
+
if (!of_have_populated_dt()) {
r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL,
&irq);
/* After the dmtimer is using hwmod these clocks won't be needed */
timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
if (IS_ERR(timer->fclk))
- return -ENODEV;
+ return PTR_ERR(timer->fclk);
- /* FIXME: Need to remove hard-coded test on timer ID */
- if (gptimer_id != 12) {
- struct clk *src;
-
- src = clk_get(NULL, fck_source);
- if (IS_ERR(src)) {
- r = -EINVAL;
- } else {
- r = clk_set_parent(timer->fclk, src);
- if (IS_ERR_VALUE(r))
- pr_warn("%s: %s cannot set source\n",
- __func__, oh->name);
+ src = clk_get(NULL, fck_source);
+ if (IS_ERR(src))
+ return PTR_ERR(src);
+
+ if (clk_get_parent(timer->fclk) != src) {
+ r = clk_set_parent(timer->fclk, src);
+ if (r < 0) {
+ pr_warn("%s: %s cannot set source\n", __func__,
+ oh->name);
clk_put(src);
+ return r;
}
}
+ clk_put(src);
+
omap_hwmod_setup_one(oh_name);
omap_hwmod_enable(oh);
__omap_dm_timer_init_regs(timer);
{
int res;
+ clkev.id = gptimer_id;
clkev.errata = omap_dm_timer_get_errata();
/*
*/
__omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);
- res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property,
- OMAP_TIMER_POSTED);
+ res = omap_dm_timer_init_one(&clkev, fck_source, property,
+ &clockevent_gpt.name, OMAP_TIMER_POSTED);
BUG_ON(res);
omap2_gp_timer_irq.dev_id = &clkev;
3, /* Timer internal resynch latency */
0xffffffff);
- pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n",
- gptimer_id, clkev.rate);
+ pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name,
+ clkev.rate);
}
/* Clocksource code */
}
static struct clocksource clocksource_gpt = {
- .name = "gp_timer",
.rating = 300,
.read = clocksource_read_cycles,
.mask = CLOCKSOURCE_MASK(32),
}
static void __init omap2_gptimer_clocksource_init(int gptimer_id,
- const char *fck_source)
+ const char *fck_source,
+ const char *property)
{
int res;
+ clksrc.id = gptimer_id;
clksrc.errata = omap_dm_timer_get_errata();
- res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL,
+ res = omap_dm_timer_init_one(&clksrc, fck_source, property,
+ &clocksource_gpt.name,
OMAP_TIMER_NONPOSTED);
BUG_ON(res);
pr_err("Could not register clocksource %s\n",
clocksource_gpt.name);
else
- pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
- gptimer_id, clksrc.rate);
+ pr_info("OMAP clocksource: %s at %lu Hz\n",
+ clocksource_gpt.name, clksrc.rate);
}
#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
pr_err("%s: ioremap failed\n", __func__);
return;
}
- sys_clk = clk_get(NULL, "sys_clkin_ck");
+ sys_clk = clk_get(NULL, "sys_clkin");
if (IS_ERR(sys_clk)) {
pr_err("%s: failed to get system clock handle\n", __func__);
iounmap(base);
#endif
#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
- clksrc_nr, clksrc_src) \
+ clksrc_nr, clksrc_src, clksrc_prop) \
void __init omap##name##_gptimer_timer_init(void) \
{ \
+ if (omap_clk_init) \
+ omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
- omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \
+ omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \
+ clksrc_prop); \
}
#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
- clksrc_nr, clksrc_src) \
+ clksrc_nr, clksrc_src, clksrc_prop) \
void __init omap##name##_sync32k_timer_init(void) \
{ \
+ if (omap_clk_init) \
+ omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
/* Enable the use of clocksource="gp_timer" kernel parameter */ \
if (use_gptimer_clksrc) \
- omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\
+ omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \
+ clksrc_prop); \
else \
omap2_sync32k_clocksource_init(); \
}
#ifdef CONFIG_ARCH_OMAP2
-OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP2_MPU_SOURCE);
+OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon",
+ 2, "timer_sys_ck", NULL);
#endif /* CONFIG_ARCH_OMAP2 */
#ifdef CONFIG_ARCH_OMAP3
-OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP3_MPU_SOURCE);
-OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure",
- 2, OMAP3_MPU_SOURCE);
-OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon",
- 2, OMAP3_MPU_SOURCE);
+OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon",
+ 2, "timer_sys_ck", NULL);
+OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
+ 2, "timer_sys_ck", NULL);
#endif /* CONFIG_ARCH_OMAP3 */
-#ifdef CONFIG_SOC_AM33XX
-OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon",
- 2, OMAP4_MPU_SOURCE);
-#endif /* CONFIG_SOC_AM33XX */
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
+OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
+ 1, "timer_sys_ck", "ti,timer-alwon");
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
+ 2, "sys_clkin_ck", NULL);
+#endif
#ifdef CONFIG_ARCH_OMAP4
-OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP4_MPU_SOURCE);
#ifdef CONFIG_LOCAL_TIMERS
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29);
void __init omap4_local_timer_init(void)
#endif /* CONFIG_ARCH_OMAP4 */
#ifdef CONFIG_SOC_OMAP5
-OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP4_MPU_SOURCE);
void __init omap5_realtime_timer_init(void)
{
int err;
- omap5_sync32k_timer_init();
+ omap4_sync32k_timer_init();
realtime_counter_init();
err = arch_timer_of_register();
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
-
-#include <asm/io.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/phy.h>
#include "soc.h"
#include "omap_device.h"
}
#endif
+
+/* Template for PHY regulators */
+static struct fixed_voltage_config hsusb_reg_config = {
+ /* .supply_name filled later */
+ .microvolts = 3300000,
+ .gpio = -1, /* updated later */
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1, /* updated later */
+ .enabled_at_boot = 0, /* keep in RESET */
+ /* .init_data filled later */
+};
+
+static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */
+static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
+
+/**
+ * usbhs_add_regulator - Add a gpio based fixed voltage regulator device
+ * @name: name for the regulator
+ * @dev_id: device id of the device this regulator supplies power to
+ * @dev_supply: supply name that the device expects
+ * @gpio: GPIO number
+ * @polarity: 1 - Active high, 0 - Active low
+ */
+static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
+ int gpio, int polarity)
+{
+ struct regulator_consumer_supply *supplies;
+ struct regulator_init_data *reg_data;
+ struct fixed_voltage_config *config;
+ struct platform_device *pdev;
+ int ret;
+
+ supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
+ if (!supplies)
+ return -ENOMEM;
+
+ supplies->supply = dev_supply;
+ supplies->dev_name = dev_id;
+
+ reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
+ if (!reg_data)
+ return -ENOMEM;
+
+ reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
+ reg_data->consumer_supplies = supplies;
+ reg_data->num_consumer_supplies = 1;
+
+ config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
+ GFP_KERNEL);
+ if (!config)
+ return -ENOMEM;
+
+ config->supply_name = name;
+ config->gpio = gpio;
+ config->enable_high = polarity;
+ config->init_data = reg_data;
+
+ /* create a regulator device */
+ pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+ if (!pdev)
+ return -ENOMEM;
+
+ pdev->id = PLATFORM_DEVID_AUTO;
+ pdev->name = reg_name;
+ pdev->dev.platform_data = config;
+
+ ret = platform_device_register(pdev);
+ if (ret)
+ pr_err("%s: Failed registering regulator %s for %s\n",
+ __func__, name, dev_id);
+
+ return ret;
+}
+
+int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
+{
+ char *rail_name;
+ int i, len;
+ struct platform_device *pdev;
+ char *phy_id;
+
+ /* the phy_id will be something like "nop_usb_xceiv.1" */
+ len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */
+
+ for (i = 0; i < num_phys; i++) {
+
+ if (!phy->port) {
+ pr_err("%s: Invalid port 0. Must start from 1\n",
+ __func__);
+ continue;
+ }
+
+ /* do we need a NOP PHY device ? */
+ if (!gpio_is_valid(phy->reset_gpio) &&
+ !gpio_is_valid(phy->vcc_gpio))
+ continue;
+
+ /* create a NOP PHY device */
+ pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+ if (!pdev)
+ return -ENOMEM;
+
+ pdev->id = phy->port;
+ pdev->name = nop_name;
+ pdev->dev.platform_data = phy->platform_data;
+
+ phy_id = kmalloc(len, GFP_KERNEL);
+ if (!phy_id)
+ return -ENOMEM;
+
+ scnprintf(phy_id, len, "nop_usb_xceiv.%d\n",
+ pdev->id);
+
+ if (platform_device_register(pdev)) {
+ pr_err("%s: Failed to register device %s\n",
+ __func__, phy_id);
+ continue;
+ }
+
+ usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
+
+ /* Do we need RESET regulator ? */
+ if (gpio_is_valid(phy->reset_gpio)) {
+
+ rail_name = kmalloc(13, GFP_KERNEL);
+ if (!rail_name)
+ return -ENOMEM;
+
+ scnprintf(rail_name, 13, "hsusb%d_reset", phy->port);
+
+ usbhs_add_regulator(rail_name, phy_id, "reset",
+ phy->reset_gpio, 1);
+ }
+
+ /* Do we need VCC regulator ? */
+ if (gpio_is_valid(phy->vcc_gpio)) {
+
+ rail_name = kmalloc(13, GFP_KERNEL);
+ if (!rail_name)
+ return -ENOMEM;
+
+ scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port);
+
+ usbhs_add_regulator(rail_name, phy_id, "vcc",
+ phy->vcc_gpio, phy->vcc_polarity);
+ }
+
+ phy++;
+ }
+
+ return 0;
+}
* published by the Free Software Foundation.
*/
+#include <linux/err.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/errno.h>
static u8 async_cs, sync_cs;
static unsigned refclk_psec;
+static struct gpmc_settings tusb_async = {
+ .wait_on_read = true,
+ .wait_on_write = true,
+ .device_width = GPMC_DEVWIDTH_16BIT,
+ .mux_add_data = GPMC_MUX_AD,
+};
+
+static struct gpmc_settings tusb_sync = {
+ .burst_read = true,
+ .burst_write = true,
+ .sync_read = true,
+ .sync_write = true,
+ .wait_on_read = true,
+ .wait_on_write = true,
+ .burst_len = GPMC_BURST_16,
+ .device_width = GPMC_DEVWIDTH_16BIT,
+ .mux_add_data = GPMC_MUX_AD,
+};
/* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */
memset(&dev_t, 0, sizeof(dev_t));
- dev_t.mux = true;
-
dev_t.t_ceasu = 8 * 1000;
dev_t.t_avdasu = t_acsnh_advnh - 7000;
dev_t.t_ce_avd = 1000;
dev_t.t_wpl = 300;
dev_t.cyc_aavdh_we = 1;
- gpmc_calc_timings(&t, &dev_t);
+ gpmc_calc_timings(&t, &tusb_async, &dev_t);
return gpmc_cs_set_timings(async_cs, &t);
}
memset(&dev_t, 0, sizeof(dev_t));
- dev_t.mux = true;
- dev_t.sync_read = true;
- dev_t.sync_write = true;
-
dev_t.clk = 11100;
dev_t.t_bacc = 1000;
dev_t.t_ces = 1000;
dev_t.cyc_wpl = 6;
dev_t.t_ce_rdyz = 7000;
- gpmc_calc_timings(&t, &dev_t);
+ gpmc_calc_timings(&t, &tusb_sync, &dev_t);
return gpmc_cs_set_timings(sync_cs, &t);
}
return status;
}
tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
+ tusb_async.wait_pin = waitpin;
async_cs = async;
- gpmc_cs_write_reg(async, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_PAGE_LEN(2)
- | GPMC_CONFIG1_WAIT_READ_MON
- | GPMC_CONFIG1_WAIT_WRITE_MON
- | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
- | GPMC_CONFIG1_READTYPE_ASYNC
- | GPMC_CONFIG1_WRITETYPE_ASYNC
- | GPMC_CONFIG1_DEVICESIZE_16
- | GPMC_CONFIG1_DEVICETYPE_NOR
- | GPMC_CONFIG1_MUXADDDATA);
+ status = gpmc_cs_program_settings(async_cs, &tusb_async);
+ if (status < 0)
+ return status;
/* SYNC region, primarily for DMA */
status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
return status;
}
tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
+ tusb_sync.wait_pin = waitpin;
sync_cs = sync;
- gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_READMULTIPLE_SUPP
- | GPMC_CONFIG1_READTYPE_SYNC
- | GPMC_CONFIG1_WRITEMULTIPLE_SUPP
- | GPMC_CONFIG1_WRITETYPE_SYNC
- | GPMC_CONFIG1_PAGE_LEN(2)
- | GPMC_CONFIG1_WAIT_READ_MON
- | GPMC_CONFIG1_WAIT_WRITE_MON
- | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
- | GPMC_CONFIG1_DEVICESIZE_16
- | GPMC_CONFIG1_DEVICETYPE_NOR
- | GPMC_CONFIG1_MUXADDDATA
- /* fclk divider gets set later */
- );
+
+ status = gpmc_cs_program_settings(sync_cs, &tusb_sync);
+ if (status < 0)
+ return status;
/* IRQ */
status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
#define USBPHY_OTGSESSEND_EN (1 << 20)
#define USBPHY_DATA_POLARITY (1 << 23)
+struct usbhs_phy_data {
+ int port; /* 1 indexed port number */
+ int reset_gpio;
+ int vcc_gpio;
+ bool vcc_polarity; /* 1 active high, 0 active low */
+ void *platform_data;
+};
+
extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
+extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys);
extern void am35x_musb_reset(void);
extern void am35x_musb_phy_power(u8 on);
.pin = GPIO_ONE_WIRE,
.is_open_drain = 0,
.enable_external_pullup = w1_enable_external_pullup,
+ .ext_pullup_enable_pin = -EINVAL,
};
struct platform_device raumfeld_w1_gpio_device = {
select S3C2410_CLOCK
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
select S3C2410_PM if PM
+ select SAMSUNG_HRT
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
select CPU_LLSERIAL_S3C2440
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
+ select SAMSUNG_HRT
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
+ select SAMSUNG_HRT
help
Support for the S3C2416 SoC from the S3C24XX line
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
+ select SAMSUNG_HRT
help
Support for S3C2440 Samsung Mobile CPU based systems.
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
+ select SAMSUNG_HRT
help
Support for S3C2442 Samsung Mobile CPU based systems.
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
+ select SAMSUNG_HRT
help
Support for the S3C2443 SoC from the S3C24XX line
config S3C2412_PM
bool
select S3C2412_PM_SLEEP
+ select SAMSUNG_WAKEMASK
help
Internal config node to apply S3C2412 power management
# core
-obj-y += common.o irq.o
+obj-y += common.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o
obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
-obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o
obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
#include <mach/hardware.h>
#include <mach/regs-irq.h>
-#include <plat/irq.h>
-
#include "bast.h"
#define irqdbf(x...)
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2410.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <linux/init.h>
#include <linux/clk.h>
-#include <plat/s3c2416.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
-#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/pm.h>
+#include "common-smdk.h"
+
/* LED devices */
static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h
- *
+/*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
-#include <plat/s3c2416.h>
-#include <plat/s3c244x.h>
-#include <plat/s3c2443.h>
#include <plat/cpu-freq.h>
#include <plat/pll.h>
+#include "common.h"
+
/* table of supported CPUs */
static const char name_s3c2410[] = "S3C2410";
#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
-void s3c2410_restart(char mode, const char *cmd);
-void s3c244x_restart(char mode, const char *cmd);
+struct s3c2410_uartcfg;
+
+#ifdef CONFIG_CPU_S3C2410
+extern int s3c2410_init(void);
+extern int s3c2410a_init(void);
+extern void s3c2410_map_io(void);
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2410_init_clocks(int xtal);
+extern void s3c2410_restart(char mode, const char *cmd);
+extern void s3c2410_init_irq(void);
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#define s3c2410a_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+extern int s3c2412_init(void);
+extern void s3c2412_map_io(void);
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2412_init_clocks(int xtal);
+extern int s3c2412_baseclk_add(void);
+extern void s3c2412_restart(char mode, const char *cmd);
+extern void s3c2412_init_irq(void);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+extern int s3c2416_init(void);
+extern void s3c2416_map_io(void);
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2416_init_clocks(int xtal);
+extern int s3c2416_baseclk_add(void);
+extern void s3c2416_restart(char mode, const char *cmd);
+extern void s3c2416_init_irq(void);
+
+extern struct syscore_ops s3c2416_irq_syscore_ops;
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+extern void s3c244x_map_io(void);
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c244x_init_clocks(int xtal);
+extern void s3c244x_restart(char mode, const char *cmd);
+#else
+#define s3c244x_init_clocks NULL
+#define s3c244x_init_uarts NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern int s3c2440_init(void);
+extern void s3c2440_map_io(void);
+extern void s3c2440_init_irq(void);
+#else
+#define s3c2440_init NULL
+#define s3c2440_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+extern void s3c2442_map_io(void);
+extern void s3c2442_init_irq(void);
+#else
+#define s3c2442_init NULL
+#define s3c2442_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+extern int s3c2443_init(void);
+extern void s3c2443_map_io(void);
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2443_init_clocks(int xtal);
+extern int s3c2443_baseclk_add(void);
+extern void s3c2443_restart(char mode, const char *cmd);
+extern void s3c2443_init_irq(void);
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
extern struct syscore_ops s3c24xx_irq_syscore_ops;
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
/* include the reset of the code which will do the work */
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>
+++ /dev/null
-/*
- * arch/arm/mach-s3c2410/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for S3C2410-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* We have a problem that the INTOFFSET register does not always
- * show one interrupt. Occasionally we get two interrupts through
- * the prioritiser, and this causes the INTOFFSET register to show
- * what looks like the logical-or of the two interrupt numbers.
- *
- * Thanks to Klaus, Shannon, et al for helping to debug this problem
-*/
-
-#define INTPND (0x10)
-#define INTOFFSET (0x14)
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \base, #S3C24XX_VA_IRQ
-
- @@ try the interrupt offset register, since it is there
-
- ldr \irqstat, [\base, #INTPND ]
- teq \irqstat, #0
- beq 1002f
- ldr \irqnr, [\base, #INTOFFSET ]
- mov \tmp, #1
- tst \irqstat, \tmp, lsl \irqnr
- bne 1001f
-
- @@ the number specified is not a valid irq, so try
- @@ and work it out for ourselves
-
- mov \irqnr, #0 @@ start here
-
- @@ work out which irq (if any) we got
-
- movs \tmp, \irqstat, lsl#16
- addeq \irqnr, \irqnr, #16
- moveq \irqstat, \irqstat, lsr#16
- tst \irqstat, #0xff
- addeq \irqnr, \irqnr, #8
- moveq \irqstat, \irqstat, lsr#8
- tst \irqstat, #0xf
- addeq \irqnr, \irqnr, #4
- moveq \irqstat, \irqstat, lsr#4
- tst \irqstat, #0x3
- addeq \irqnr, \irqnr, #2
- moveq \irqstat, \irqstat, lsr#2
- tst \irqstat, #0x1
- addeq \irqnr, \irqnr, #1
-
- @@ we have the value
-1001:
- adds \irqnr, \irqnr, #IRQ_EINT0
-1002:
- @@ exit here, Z flag unset if IRQ
-
- .endm
#define IRQ_ADCPARENT S3C2410_IRQ(31)
/* interrupts generated from the external interrupts sources */
-#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */
-#define IRQ_EINT5 S3C2410_IRQ(33)
-#define IRQ_EINT6 S3C2410_IRQ(34)
-#define IRQ_EINT7 S3C2410_IRQ(35)
-#define IRQ_EINT8 S3C2410_IRQ(36)
-#define IRQ_EINT9 S3C2410_IRQ(37)
-#define IRQ_EINT10 S3C2410_IRQ(38)
-#define IRQ_EINT11 S3C2410_IRQ(39)
-#define IRQ_EINT12 S3C2410_IRQ(40)
-#define IRQ_EINT13 S3C2410_IRQ(41)
-#define IRQ_EINT14 S3C2410_IRQ(42)
-#define IRQ_EINT15 S3C2410_IRQ(43)
-#define IRQ_EINT16 S3C2410_IRQ(44)
-#define IRQ_EINT17 S3C2410_IRQ(45)
-#define IRQ_EINT18 S3C2410_IRQ(46)
-#define IRQ_EINT19 S3C2410_IRQ(47)
-#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */
-#define IRQ_EINT21 S3C2410_IRQ(49)
-#define IRQ_EINT22 S3C2410_IRQ(50)
-#define IRQ_EINT23 S3C2410_IRQ(51)
+#define IRQ_EINT0_2412 S3C2410_IRQ(32)
+#define IRQ_EINT1_2412 S3C2410_IRQ(33)
+#define IRQ_EINT2_2412 S3C2410_IRQ(34)
+#define IRQ_EINT3_2412 S3C2410_IRQ(35)
+#define IRQ_EINT4 S3C2410_IRQ(36) /* 52 */
+#define IRQ_EINT5 S3C2410_IRQ(37)
+#define IRQ_EINT6 S3C2410_IRQ(38)
+#define IRQ_EINT7 S3C2410_IRQ(39)
+#define IRQ_EINT8 S3C2410_IRQ(40)
+#define IRQ_EINT9 S3C2410_IRQ(41)
+#define IRQ_EINT10 S3C2410_IRQ(42)
+#define IRQ_EINT11 S3C2410_IRQ(43)
+#define IRQ_EINT12 S3C2410_IRQ(44)
+#define IRQ_EINT13 S3C2410_IRQ(45)
+#define IRQ_EINT14 S3C2410_IRQ(46)
+#define IRQ_EINT15 S3C2410_IRQ(47)
+#define IRQ_EINT16 S3C2410_IRQ(48)
+#define IRQ_EINT17 S3C2410_IRQ(49)
+#define IRQ_EINT18 S3C2410_IRQ(50)
+#define IRQ_EINT19 S3C2410_IRQ(51)
+#define IRQ_EINT20 S3C2410_IRQ(52) /* 68 */
+#define IRQ_EINT21 S3C2410_IRQ(53)
+#define IRQ_EINT22 S3C2410_IRQ(54)
+#define IRQ_EINT23 S3C2410_IRQ(55)
#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4)
#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
-#define IRQ_LCD_FIFO S3C2410_IRQ(52)
-#define IRQ_LCD_FRAME S3C2410_IRQ(53)
+#define IRQ_LCD_FIFO S3C2410_IRQ(56)
+#define IRQ_LCD_FRAME S3C2410_IRQ(57)
/* IRQs for the interal UARTs, and ADC
* these need to be ordered in number of appearance in the
* SUBSRC mask register
*/
-#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54)
+#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+58)
-#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */
+#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 74 */
#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1)
#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2)
-#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */
+#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 77 */
#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4)
#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5)
-#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */
+#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 80 */
#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7)
#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8)
/* second interrupt-register of s3c2416/s3c2450 */
-#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 54 + 29)
+#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 58 + 29)
#define IRQ_S3C2416_2D S3C2416_IRQ(0)
#define IRQ_S3C2416_IIC1 S3C2416_IRQ(1)
#define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2)
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 MMC/SDIO register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_SDI
-#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-
-#define S3C2410_SDICON (0x00)
-#define S3C2410_SDIPRE (0x04)
-#define S3C2410_SDICMDARG (0x08)
-#define S3C2410_SDICMDCON (0x0C)
-#define S3C2410_SDICMDSTAT (0x10)
-#define S3C2410_SDIRSP0 (0x14)
-#define S3C2410_SDIRSP1 (0x18)
-#define S3C2410_SDIRSP2 (0x1C)
-#define S3C2410_SDIRSP3 (0x20)
-#define S3C2410_SDITIMER (0x24)
-#define S3C2410_SDIBSIZE (0x28)
-#define S3C2410_SDIDCON (0x2C)
-#define S3C2410_SDIDCNT (0x30)
-#define S3C2410_SDIDSTA (0x34)
-#define S3C2410_SDIFSTA (0x38)
-
-#define S3C2410_SDIDATA (0x3C)
-#define S3C2410_SDIIMSK (0x40)
-
-#define S3C2440_SDIDATA (0x40)
-#define S3C2440_SDIIMSK (0x3C)
-
-#define S3C2440_SDICON_SDRESET (1<<8)
-#define S3C2440_SDICON_MMCCLOCK (1<<5)
-#define S3C2410_SDICON_BYTEORDER (1<<4)
-#define S3C2410_SDICON_SDIOIRQ (1<<3)
-#define S3C2410_SDICON_RWAITEN (1<<2)
-#define S3C2410_SDICON_FIFORESET (1<<1)
-#define S3C2410_SDICON_CLOCKTYPE (1<<0)
-
-#define S3C2410_SDICMDCON_ABORT (1<<12)
-#define S3C2410_SDICMDCON_WITHDATA (1<<11)
-#define S3C2410_SDICMDCON_LONGRSP (1<<10)
-#define S3C2410_SDICMDCON_WAITRSP (1<<9)
-#define S3C2410_SDICMDCON_CMDSTART (1<<8)
-#define S3C2410_SDICMDCON_SENDERHOST (1<<6)
-#define S3C2410_SDICMDCON_INDEX (0x3f)
-
-#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
-#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
-#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-#define S3C2410_SDICMDSTAT_RSPFIN (1<<9)
-#define S3C2410_SDICMDSTAT_XFERING (1<<8)
-#define S3C2410_SDICMDSTAT_INDEX (0xff)
-
-#define S3C2440_SDIDCON_DS_BYTE (0<<22)
-#define S3C2440_SDIDCON_DS_HALFWORD (1<<22)
-#define S3C2440_SDIDCON_DS_WORD (2<<22)
-#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
-#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
-#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
-#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18)
-#define S3C2410_SDIDCON_BLOCKMODE (1<<17)
-#define S3C2410_SDIDCON_WIDEBUS (1<<16)
-#define S3C2410_SDIDCON_DMAEN (1<<15)
-#define S3C2410_SDIDCON_STOP (1<<14)
-#define S3C2440_SDIDCON_DATSTART (1<<14)
-#define S3C2410_SDIDCON_DATMODE (3<<12)
-#define S3C2410_SDIDCON_BLKNUM (0x7ff)
-
-/* constants for S3C2410_SDIDCON_DATMODE */
-#define S3C2410_SDIDCON_XFER_READY (0<<12)
-#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
-#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
-
-#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
-#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
-
-#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
-#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */
-#define S3C2410_SDIDSTA_CRCFAIL (1<<7)
-#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6)
-#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5)
-#define S3C2410_SDIDSTA_XFERFINISH (1<<4)
-#define S3C2410_SDIDSTA_BUSYFINISH (1<<3)
-#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */
-#define S3C2410_SDIDSTA_TXDATAON (1<<1)
-#define S3C2410_SDIDSTA_RXDATAON (1<<0)
-
-#define S3C2440_SDIFSTA_FIFORESET (1<<16)
-#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */
-#define S3C2410_SDIFSTA_TFDET (1<<13)
-#define S3C2410_SDIFSTA_RFDET (1<<12)
-#define S3C2410_SDIFSTA_TFHALF (1<<11)
-#define S3C2410_SDIFSTA_TFEMPTY (1<<10)
-#define S3C2410_SDIFSTA_RFLAST (1<<9)
-#define S3C2410_SDIFSTA_RFFULL (1<<8)
-#define S3C2410_SDIFSTA_RFHALF (1<<7)
-#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
-
-#define S3C2410_SDIIMSK_RESPONSECRC (1<<17)
-#define S3C2410_SDIIMSK_CMDSENT (1<<16)
-#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15)
-#define S3C2410_SDIIMSK_RESPONSEND (1<<14)
-#define S3C2410_SDIIMSK_READWAIT (1<<13)
-#define S3C2410_SDIIMSK_SDIOIRQ (1<<12)
-#define S3C2410_SDIIMSK_FIFOFAIL (1<<11)
-#define S3C2410_SDIIMSK_CRCSTATUS (1<<10)
-#define S3C2410_SDIIMSK_DATACRC (1<<9)
-#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8)
-#define S3C2410_SDIIMSK_DATAFINISH (1<<7)
-#define S3C2410_SDIIMSK_BUSYFINISH (1<<6)
-#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */
-#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4)
-#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3)
-#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2)
-#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1)
-#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0)
-
-#endif /* __ASM_ARM_REGS_SDI */
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/syscore_ops.h>
+#include <linux/io.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/irq.h>
+#include <plat/map-base.h>
+#include <plat/map-s3c.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
#include <asm/irq.h>
+++ /dev/null
-/* linux/arch/arm/mach-s3c2412/irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/irq.h>
-#include <plat/pm.h>
-
-#include "s3c2412-power.h"
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
-
-/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
- * having them turn up in both the INT* and the EINT* registers. Whilst
- * both show the status, they both now need to be acked when the IRQs
- * go off.
-*/
-
-static void
-s3c2412_irq_mask(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask | bitval, S3C2410_INTMSK);
-
- mask = __raw_readl(S3C2412_EINTMASK);
- __raw_writel(mask | bitval, S3C2412_EINTMASK);
-}
-
-static inline void
-s3c2412_irq_ack(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-
- __raw_writel(bitval, S3C2412_EINTPEND);
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c2412_irq_maskack(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask|bitval, S3C2410_INTMSK);
-
- mask = __raw_readl(S3C2412_EINTMASK);
- __raw_writel(mask | bitval, S3C2412_EINTMASK);
-
- __raw_writel(bitval, S3C2412_EINTPEND);
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static void
-s3c2412_irq_unmask(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2412_EINTMASK);
- __raw_writel(mask & ~bitval, S3C2412_EINTMASK);
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask & ~bitval, S3C2410_INTMSK);
-}
-
-static struct irq_chip s3c2412_irq_eint0t4 = {
- .irq_ack = s3c2412_irq_ack,
- .irq_mask = s3c2412_irq_mask,
- .irq_unmask = s3c2412_irq_unmask,
- .irq_set_wake = s3c_irq_wake,
- .irq_set_type = s3c_irqext_type,
-};
-
-#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0)))
-
-/* CF and SDI sub interrupts */
-
-static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
-
- if (subsrc & INTBIT(IRQ_S3C2412_SDI))
- generic_handle_irq(IRQ_S3C2412_SDI);
-
- if (subsrc & INTBIT(IRQ_S3C2412_CF))
- generic_handle_irq(IRQ_S3C2412_CF);
-}
-
-#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
-#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF)
-
-static void s3c2412_irq_cfsdi_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
-
-static void s3c2412_irq_cfsdi_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CFSDI);
-}
-
-static void s3c2412_irq_cfsdi_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
-
-static struct irq_chip s3c2412_irq_cfsdi = {
- .name = "s3c2412-cfsdi",
- .irq_ack = s3c2412_irq_cfsdi_ack,
- .irq_mask = s3c2412_irq_cfsdi_mask,
- .irq_unmask = s3c2412_irq_cfsdi_unmask,
-};
-
-static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state)
-{
- unsigned long pwrcfg;
-
- pwrcfg = __raw_readl(S3C2412_PWRCFG);
- if (state)
- pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ;
- else
- pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ;
- __raw_writel(pwrcfg, S3C2412_PWRCFG);
-
- return s3c_irq_chip.irq_set_wake(data, state);
-}
-
-static struct irq_chip s3c2412_irq_rtc_chip;
-
-static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4,
- handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- /* add demux support for CF/SDI */
-
- irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi);
-
- for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- /* change RTC IRQ's set wake method */
-
- s3c2412_irq_rtc_chip = s3c_irq_chip;
- s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake;
-
- irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip);
-
- return 0;
-}
-
-static struct subsys_interface s3c2412_irq_interface = {
- .name = "s3c2412_irq",
- .subsys = &s3c2412_subsys,
- .add_dev = s3c2412_irq_add,
-};
-
-static int s3c2412_irq_init(void)
-{
- return subsys_interface_register(&s3c2412_irq_interface);
-}
-
-arch_initcall(s3c2412_irq_init);
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 13;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_WDT);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_AC97);
- }
- }
-}
-
-
-#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static struct irq_chip s3c_irq_wdtac97 = {
- .irq_mask = s3c_irq_wdtac97_mask,
- .irq_unmask = s3c_irq_wdtac97_unmask,
- .irq_ack = s3c_irq_wdtac97_ack,
-};
-
-static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- printk("S3C2440: IRQ Support\n");
-
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
+++ /dev/null
-/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 11;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_CAM_C);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_CAM_P);
- }
- }
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
- .irq_mask = s3c_irq_cam_mask,
- .irq_unmask = s3c_irq_cam_unmask,
- .irq_ack = s3c_irq_cam_ack,
-};
-
-static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
- /* add chained handler for camera */
-
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-static struct subsys_interface s3c2442_irq_interface = {
- .name = "s3c2442_irq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-
-static int s3c2442_irq_init(void)
-{
- return subsys_interface_register(&s3c2442_irq_interface);
-}
-
-arch_initcall(s3c2442_irq_init);
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include <plat/samsung-time.h>
+
#include "common.h"
static struct resource amlm5900_nor_resource =
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
#ifdef CONFIG_FB_S3C2410
MACHINE_START(AML_M5900, "AML_M5900")
.atag_offset = 0x100,
.map_io = amlm5900_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.init_machine = amlm5900_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/samsung-time.h>
#include "anubis.h"
#include "common.h"
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* check for the newer revision boards with large page nand */
.atag_offset = 0x100,
.map_io = anubis_map_io,
.init_machine = anubis_init,
- .init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_irq = s3c2440_init_irq,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/mmc-s3cmci.h>
+#include <plat/samsung-time.h>
#include "common.h"
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init at2440evb_init(void)
.atag_offset = 0x100,
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
- .init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_irq = s3c2440_init_irq,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init bast_init(void)
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.atag_offset = 0x100,
.map_io = bast_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.init_machine = bast_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <plat/gpio-cfg.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "gta02.h"
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
.atag_offset = 0x100,
.map_io = gta02_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2442_init_irq,
.init_machine = gta02_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/pll.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
-
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* setup PM */
memblock_reserve(0x30081000, 0x1000);
}
-static void __init h1940_init_irq(void)
-{
- s3c24xx_init_irq();
-}
-
static void __init h1940_init(void)
{
u32 tmp;
.atag_offset = 0x100,
.map_io = h1940_map_io,
.reserve = h1940_reserve,
- .init_irq = h1940_init_irq,
+ .init_irq = s3c2410_init_irq,
.init_machine = h1940_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/s3c2412.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
+#include "common.h"
#include "s3c2412-power.h"
static struct map_desc jive_iodesc[] __initdata = {
s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void jive_power_off(void)
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = jive_map_io,
.init_machine = jive_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include <sound/s3c24xx_uda134x.h>
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/*
.atag_offset = 0x100,
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
- .init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_irq = s3c2440_init_irq,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/cpu.h>
#include <plat/devs.h>
#include <linux/platform_data/mmc-s3cmci.h>
-#include <plat/s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
#include "common.h"
n30_hwinit();
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* GPB3 is the line that controls the pull-up for the USB D+ line */
Ben Dooks <ben-linux@fluff.org>
*/
.atag_offset = 0x100,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.init_machine = n30_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
.restart = s3c2410_restart,
MACHINE_END
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
.atag_offset = 0x100,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.init_machine = n30_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
.restart = s3c2410_restart,
MACHINE_END
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
nexcoder_sensorboard_init();
}
.atag_offset = 0x100,
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
- .init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_irq = s3c2440_init_irq,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* check for the newer revision boards with large page nand */
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.atag_offset = 0x100,
.map_io = osiris_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_machine = osiris_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
-#include <plat/s3c2410.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "otom.h"
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init otom11_init(void)
.atag_offset = 0x100,
.map_io = otom11_map_io,
.init_machine = otom11_init,
- .init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_irq = s3c2410_init_irq,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
+#include <plat/samsung-time.h>
#include "common.h"
+#include "common-smdk.h"
static struct map_desc qt2410_iodesc[] __initdata = {
{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
s3c24xx_init_clocks(12*1000*1000);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init qt2410_machine_init(void)
MACHINE_START(QT2410, "QT2410")
.atag_offset = 0x100,
.map_io = qt2410_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.init_machine = qt2410_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <plat/pm.h>
#include <plat/regs-iic.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* setup PM */
.atag_offset = 0x100,
.map_io = rx1950_map_io,
.reserve = rx1950_reserve,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2442_init_irq,
.init_machine = rx1950_init_machine,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* H1940 and RX3715 need to reserve this for suspend */
memblock_reserve(0x30081000, 0x1000);
}
-static void __init rx3715_init_irq(void)
-{
- s3c24xx_init_irq();
-}
-
static void __init rx3715_init_machine(void)
{
#ifdef CONFIG_PM_H1940
.atag_offset = 0x100,
.map_io = rx3715_map_io,
.reserve = rx3715_reserve,
- .init_irq = rx3715_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_machine = rx3715_init_machine,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
+#include <plat/samsung-time.h>
#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2410_iodesc[] __initdata = {
/* nothing here yet */
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2410_init(void)
/* Maintainer: Jonas Dietsche */
.atag_offset = 0x100,
.map_io = smdk2410_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.init_machine = smdk2410_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2413_iodesc[] __initdata = {
};
s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2413_machine_init(void)
.atag_offset = 0x100,
.fixup = smdk2413_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
.atag_offset = 0x100,
.fixup = smdk2413_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
.atag_offset = 0x100,
.fixup = smdk2413_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2416.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/s3c-hsudc.h>
+#include <plat/samsung-time.h>
#include <plat/fb.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2416_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2416_machine_init(void)
.init_irq = s3c2416_init_irq,
.map_io = smdk2416_map_io,
.init_machine = smdk2416_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2416_restart,
MACHINE_END
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
+#include <plat/samsung-time.h>
#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2440_machine_init(void)
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2443_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2443_machine_init(void)
.init_irq = s3c2443_init_irq,
.map_io = smdk2443_map_io,
.init_machine = smdk2443_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2443_restart,
MACHINE_END
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include <plat/samsung-time.h>
#include "common.h"
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init tct_hammer_init(void)
MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
.atag_offset = 0x100,
.map_io = tct_hammer_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.init_machine = tct_hammer_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init vr1000_init(void)
.atag_offset = 0x100,
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
- .init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_irq = s3c2410_init_irq,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
+#include "common.h"
static struct map_desc vstms_iodesc[] __initdata = {
};
s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init vstms_init(void)
.atag_offset = 0x100,
.fixup = vstms_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.init_machine = vstms_init,
.map_io = vstms_map_io,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/s3c2412.h>
+#include <plat/wakeup-mask.h>
#include "regs-dsc.h"
#include "s3c2412-power.h"
return 1; /* Aborting suspend */
}
+/* mapping of interrupts to parts of the wakeup mask */
+static struct samsung_wakeup_mask wake_irqs[] = {
+ { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, },
+};
+
static void s3c2412_pm_prepare(void)
{
+ samsung_sync_wakemask(S3C2412_PWRCFG,
+ wake_irqs, ARRAY_SIZE(wake_irqs));
}
static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
-#include <plat/s3c2410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
-#include <plat/s3c2412.h>
#include "common.h"
#include "regs-dsc.h"
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2416.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/sdhci.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/gpio-core.h>
#include <plat/clock.h>
#include <plat/cpu.h>
-#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/gpio-core.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2443.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb-core.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
# Configuration options for the S3C6410 CPU
config CPU_S3C6400
+ select SAMSUNG_HRT
bool
help
Enable S3C6400 CPU support
config CPU_S3C6410
+ select SAMSUNG_HRT
bool
help
Enable S3C6410 CPU support
* will be fine with us.
*/
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-gpio.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
anw6410_lcd_mode_set();
}
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <plat/adc.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "crag6410.h"
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* LCD type and Bypass set by bootloader */
}
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init hmt_machine_init(void)
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init ncp_machine_init(void)
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
smartq_lcd_mode_set();
}
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "mach-smartq.h"
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "mach-smartq.h"
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/samsung-time.h>
#include "common.h"
s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static struct platform_device *smdk6400_devices[] __initdata = {
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/keypad.h>
#include <plat/backlight.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* set the LCD type */
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
config CPU_S5P6440
bool
- select S5P_HRT
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
+ select SAMSUNG_HRT
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
- select S5P_HRT
+ select SAMSUNG_HRT
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
#endif
.endm
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>
#include <plat/pll.h>
#include <plat/adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
s5p64x0_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void s5p6440_set_lcd_interface(void)
.init_irq = s5p6440_init_irq,
.map_io = smdk6440_map_io,
.init_machine = smdk6440_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5p64x0_restart,
MACHINE_END
#include <plat/pll.h>
#include <plat/adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
s5p64x0_init_io(NULL, 0);
s3c24xx_init_clocks(19200000);
s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void s5p6450_set_lcd_interface(void)
.init_irq = s5p6450_init_irq,
.map_io = smdk6450_map_io,
.init_machine = smdk6450_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5p64x0_restart,
MACHINE_END
bool
select S5P_EXT_INT
select SAMSUNG_DMADEV
+ select SAMSUNG_HRT
help
Enable S5PC100 CPU support
* will be fine with us.
*/
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/asoc-s3c.h>
#include <plat/backlight.h>
+#include <plat/samsung-time.h>
#include "common.h"
s5pc100_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdkc100_machine_init(void)
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pc100_restart,
MACHINE_END
#include <linux/mmc/card.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
config CPU_S5PV210
bool
select S5P_EXT_INT
- select S5P_HRT
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
+ select SAMSUNG_HRT
help
Enable S5PV210 CPU support
.name = "pcmcdclk",
};
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
static struct clk *clkset_vpllsrc_list[] = {
[0] = &clk_fin_vpll,
[1] = &clk_sclk_hdmi27m,
static struct clk init_clocks_off[] = {
{
- .name = "dma",
- .devname = "dma-pl330.0",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "dma",
- .devname = "dma-pl330.1",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
.name = "rot",
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1<<19),
};
+static struct clk clk_pdma0 = {
+ .name = "pdma0",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 3),
+};
+
+static struct clk clk_pdma1 = {
+ .name = "pdma1",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 4),
+};
+
static struct clk *clkset_uart_list[] = {
[6] = &clk_mout_mpll.clk,
[7] = &clk_mout_epll.clk,
&clk_hsmmc1,
&clk_hsmmc2,
&clk_hsmmc3,
+ &clk_pdma0,
+ &clk_pdma1,
};
/* Clock initialisation code */
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
+ CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
};
void __init s5pv210_register_clocks(void)
for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
s3c_disable_clocks(clk_cdev[ptr], 1);
- s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}
* will be fine with us.
*/
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>
#include <plat/fb.h>
#include <plat/fimc-core.h>
#include <plat/sdhci.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include "common.h"
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init aquila_machine_init(void)
.init_irq = s5pv210_init_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
MACHINE_END
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/clock.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/mfc.h>
#include <plat/camport.h>
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .bus_type = FIMC_BUS_TYPE_ITU_601,
+ .fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &noon010pc30_board_info,
.i2c_bus_num = 0,
.clk_frequency = 16000000UL,
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init goni_reserve(void)
.init_irq = s5pv210_init_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.reserve = &goni_reserve,
.restart = s5pv210_restart,
MACHINE_END
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/mfc.h>
#include "common.h"
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdkc110_reserve(void)
.init_irq = s5pv210_init_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
.reserve = &smdkc110_reserve,
MACHINE_END
#include <plat/keypad.h>
#include <plat/pm.h>
#include <plat/fb.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
#include <plat/clock.h>
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
- s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
}
static void __init smdkv210_reserve(void)
.init_irq = s5pv210_init_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
.reserve = &smdkv210_reserve,
MACHINE_END
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include "common.h"
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init torbreck_machine_init(void)
.init_irq = s5pv210_init_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
MACHINE_END
#include <linux/mmc/card.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
select CPU_V7
select I2C
select SH_CLK_CPG
+ select RENESAS_INTC_IRQPIN
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select SH_CLK_CPG
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
+ select RENESAS_INTC_IRQPIN
config ARCH_EMEV2
bool "Emma Mobile EV2"
# SMP objects
smp-y := platsmp.o headsmp.o
-smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-sh73a0.o
-smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o
-smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o
+smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o
+smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o
+smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o
# IRQ objects
obj-$(CONFIG_ARCH_SH7372) += entry-intc.o
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = intcs_evt2irq(0x260), /* IRQ3 */
+ .start = irq_pin(3), /* IRQ3 */
.flags = IORESOURCE_IRQ,
},
};
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = intcs_evt2irq(0x220), /* IRQ1 */
+ .start = irq_pin(1), /* IRQ1 */
.flags = IORESOURCE_IRQ,
},
};
struct renesas_usbhs_platform_info info;
};
-#define IRQ15 intcs_evt2irq(0x03e0)
+#define IRQ15 irq_pin(15)
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
},
{
I2C_BOARD_INFO("ak8975", 0x0c),
- .irq = intcs_evt2irq(0x3380), /* IRQ28 */
+ .irq = irq_pin(28), /* IRQ28 */
},
{
I2C_BOARD_INFO("adxl34x", 0x1d),
- .irq = intcs_evt2irq(0x3340), /* IRQ26 */
+ .irq = irq_pin(26), /* IRQ26 */
},
};
static struct i2c_board_info i2c1_devices[] = {
{
I2C_BOARD_INFO("st1232-ts", 0x55),
- .irq = intcs_evt2irq(0x300), /* IRQ8 */
+ .irq = irq_pin(8), /* IRQ8 */
},
};
static struct i2c_board_info i2c3_devices[] = {
{
I2C_BOARD_INFO("pcf8575", 0x20),
- .irq = intcs_evt2irq(0x3260), /* IRQ19 */
+ .irq = irq_pin(19), /* IRQ19 */
.platform_data = &pcf8575_pdata,
},
};
#include <linux/smsc911x.h>
#include <linux/spi/spi.h>
#include <linux/spi/sh_hspi.h>
+#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/usb/otg.h>
CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]),
+ CLKDEV_DEV_ID("e6c80000.sci", &mstp_clks[MSTP200]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]),
+ CLKDEV_DEV_ID("e6c70000.sci", &mstp_clks[MSTP201]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]),
+ CLKDEV_DEV_ID("e6c60000.sci", &mstp_clks[MSTP202]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("e6c50000.sci", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("e6c40000.sci", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("e6c30000.sci", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]),
+ CLKDEV_DEV_ID("e6cb0000.sci", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]),
CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]),
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]),
+ CLKDEV_DEV_ID("e6cd0000.sci", &mstp_clks[MSTP222]),
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]),
+ CLKDEV_DEV_ID("e6cc0000.sci", &mstp_clks[MSTP230]),
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]),
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]),
CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP320]),
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
+ CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]),
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]),
+ CLKDEV_DEV_ID("e6860000.sdhi", &mstp_clks[MSTP313]),
CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]),
+ CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP309]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]),
+ CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]),
/* ICK */
CLKDEV_ICK_ID("host", "renesas_usbhs", &mstp_clks[MSTP416]),
};
enum { MSTP323, MSTP322, MSTP321, MSTP320,
- MSTP101, MSTP100,
+ MSTP115,
+ MSTP103, MSTP101, MSTP100,
MSTP030,
MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
MSTP016, MSTP015, MSTP014,
[MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */
[MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */
[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */
+ [MSTP115] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 15, 0), /* SATA */
+ [MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR1, 3, 0), /* DU */
[MSTP101] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 1, 0), /* USB2 */
[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 0, 0), /* USB0/1 */
[MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */
CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
/* MSTP32 clocks */
+ CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */
+ CLKDEV_DEV_ID("fc600000.sata", &mstp_clks[MSTP115]), /* SATA w/DT */
CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */
CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
+ CLKDEV_DEV_ID("rcar-du.0", &mstp_clks[MSTP103]), /* DU */
};
void __init r8a7779_clock_init(void)
static struct clk div4_clks[DIV4_NR] = {
[DIV4_I] = DIV4(FRQCRA, 20, 0xdff, CLK_ENABLE_ON_INIT),
- [DIV4_ZG] = DIV4(FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT),
+ [DIV4_ZG] = SH_CLK_DIV4(&pll0_clk, FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT),
[DIV4_M3] = DIV4(FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT),
[DIV4_B] = DIV4(FRQCRA, 8, 0xdff, CLK_ENABLE_ON_INIT),
[DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0),
[DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0),
- [DIV4_Z] = DIV4(FRQCRB, 24, 0x97f, 0),
+ [DIV4_Z] = SH_CLK_DIV4(&pll0_clk, FRQCRB, 24, 0x97f, 0),
[DIV4_ZTR] = DIV4(FRQCRB, 20, 0xdff, 0),
[DIV4_ZT] = DIV4(FRQCRB, 16, 0xdff, 0),
[DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0),
CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */
CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
+ CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
+ CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
+ CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP311]), /* SDHI2 */
CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
/*
- * SMP support for SoC sh73a0
+ * Shared SCU setup for mach-shmobile
*
* Copyright (C) 2012 Bastian Hecht
*
* the physical address as the MMU is still turned off.
*/
.align 12
-ENTRY(sh73a0_secondary_vector)
+ENTRY(shmobile_secondary_vector_scu)
mrc p15, 0, r0, c0, c0, 5 @ read MIPDR
and r0, r0, #3 @ mask out cpu ID
lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits
- mov r1, #0xf0000000 @ SCU base address
+ ldr r1, 2f
+ ldr r1, [r1] @ SCU base address
ldr r2, [r1, #8] @ SCU Power Status Register
mov r3, #3
bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode)
ldr pc, 1f
1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
-ENDPROC(sh73a0_secondary_vector)
+2: .long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET
+ENDPROC(shmobile_secondary_vector_scu)
+
+ .text
+ .globl shmobile_scu_base
+shmobile_scu_base:
+ .space 4
+++ /dev/null
-/*
- * SMP support for R-Mobile / SH-Mobile
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * Based on realview, Copyright (C) 2002 ARM Ltd, All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/cpumask.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <mach/common.h>
-#include <mach/r8a7779.h>
-#include <mach/emev2.h>
-#include <asm/cacheflush.h>
-#include <asm/mach-types.h>
-
-static cpumask_t dead_cpus;
-
-void shmobile_cpu_die(unsigned int cpu)
-{
- /* hardware shutdown code running on the CPU that is being offlined */
- flush_cache_all();
- dsb();
-
- /* notify platform_cpu_kill() that hardware shutdown is finished */
- cpumask_set_cpu(cpu, &dead_cpus);
-
- /* wait for SoC code in platform_cpu_kill() to shut off CPU core
- * power. CPU bring up starts from the reset vector.
- */
- while (1) {
- /*
- * here's the WFI
- */
- asm(".word 0xe320f003\n"
- :
- :
- : "memory", "cc");
- }
-}
-
-int shmobile_cpu_disable(unsigned int cpu)
-{
- cpumask_clear_cpu(cpu, &dead_cpus);
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
-
-int shmobile_cpu_disable_any(unsigned int cpu)
-{
- cpumask_clear_cpu(cpu, &dead_cpus);
- return 0;
-}
-
-int shmobile_cpu_is_dead(unsigned int cpu)
-{
- return cpumask_test_cpu(cpu, &dead_cpus);
-}
struct twd_local_timer;
extern void shmobile_setup_console(void);
extern void shmobile_secondary_vector(void);
+extern void shmobile_secondary_vector_scu(void);
struct clk;
extern int shmobile_clk_init(void);
extern void shmobile_handle_irq_intc(struct pt_regs *);
extern struct clk sh7372_extal1_clk;
extern struct clk sh7372_extal2_clk;
+extern void sh73a0_init_delay(void);
extern void sh73a0_init_irq(void);
extern void sh73a0_init_irq_dt(void);
extern void sh73a0_map_io(void);
extern void sh73a0_earlytimer_init(void);
extern void sh73a0_add_early_devices(void);
-extern void sh73a0_add_early_devices_dt(void);
extern void sh73a0_add_standard_devices(void);
extern void sh73a0_add_standard_devices_dt(void);
extern void sh73a0_clock_init(void);
extern void sh73a0_pinmux_init(void);
extern void sh73a0_pm_init(void);
-extern void sh73a0_secondary_vector(void);
extern struct clk sh73a0_extal1_clk;
extern struct clk sh73a0_extal2_clk;
extern struct clk sh73a0_extcki_clk;
extern struct clk sh73a0_extalr_clk;
+extern void r8a7740_meram_workaround(void);
extern void r8a7740_init_irq(void);
extern void r8a7740_map_io(void);
extern void r8a7740_add_early_devices(void);
extern void r8a7740_pinmux_init(void);
extern void r8a7740_pm_init(void);
+extern void r8a7779_init_delay(void);
extern void r8a7779_init_irq(void);
+extern void r8a7779_init_irq_extpin(int irlm);
+extern void r8a7779_init_irq_dt(void);
extern void r8a7779_map_io(void);
extern void r8a7779_earlytimer_init(void);
extern void r8a7779_add_early_devices(void);
extern void r8a7779_add_standard_devices(void);
+extern void r8a7779_add_standard_devices_dt(void);
extern void r8a7779_clock_init(void);
extern void r8a7779_pinmux_init(void);
extern void r8a7779_pm_init(void);
-extern void r8a7740_meram_workaround(void);
-
extern void r8a7779_register_twd(void);
#ifdef CONFIG_SUSPEND
static inline int shmobile_cpuidle_init(void) { return 0; }
#endif
-extern void shmobile_cpu_die(unsigned int cpu);
-extern int shmobile_cpu_disable(unsigned int cpu);
-extern int shmobile_cpu_disable_any(unsigned int cpu);
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern int shmobile_cpu_is_dead(unsigned int cpu);
-#else
-static inline int shmobile_cpu_is_dead(unsigned int cpu) { return 1; }
-#endif
-
+extern void __iomem *shmobile_scu_base;
extern void shmobile_smp_init_cpus(unsigned int ncores);
static inline void __init shmobile_init_late(void)
/* GIC */
#define gic_spi(nr) ((nr) + 32)
+#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */
/* INTCS */
#define INTCS_VECT_BASE 0x3400
#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
+/* External IRQ pins */
+#define IRQPIN_BASE 2000
+#define irq_pin(nr) ((nr) + IRQPIN_BASE)
+
#endif /* __ASM_MACH_IRQS_H */
*/
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
+#include <linux/platform_data/irq-renesas-intc-irqpin.h>
+#include <linux/irqchip.h>
#include <mach/common.h>
#include <mach/intc.h>
+#include <mach/irqs.h>
#include <mach/r8a7779.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#define INT2NTSR0 IOMEM(0xfe700060)
#define INT2NTSR1 IOMEM(0xfe700064)
+static struct renesas_intc_irqpin_config irqpin0_platform_data = {
+ .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
+ .sense_bitfield_width = 2,
+};
+
+static struct resource irqpin0_resources[] = {
+ DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
+ DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
+ DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
+ DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
+ DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
+ DEFINE_RES_IRQ(gic_spi(27)), /* IRQ0 */
+ DEFINE_RES_IRQ(gic_spi(28)), /* IRQ1 */
+ DEFINE_RES_IRQ(gic_spi(29)), /* IRQ2 */
+ DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */
+};
+
+static struct platform_device irqpin0_device = {
+ .name = "renesas_intc_irqpin",
+ .id = 0,
+ .resource = irqpin0_resources,
+ .num_resources = ARRAY_SIZE(irqpin0_resources),
+ .dev = {
+ .platform_data = &irqpin0_platform_data,
+ },
+};
+
+void __init r8a7779_init_irq_extpin(int irlm)
+{
+ void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
+ unsigned long tmp;
+
+ if (icr0) {
+ tmp = ioread32(icr0);
+ if (irlm)
+ tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
+ else
+ tmp &= ~(1 << 23); /* IRL mode - not supported */
+ tmp |= (1 << 21); /* LVLMODE = 1 */
+ iowrite32(tmp, icr0);
+ iounmap(icr0);
+
+ if (irlm)
+ platform_device_register(&irqpin0_device);
+ } else
+ pr_warn("r8a7779: unable to setup external irq pin mode\n");
+}
+
static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
{
return 0; /* always allow wakeup */
}
-void __init r8a7779_init_irq(void)
+static void __init r8a7779_init_irq_common(void)
{
- void __iomem *gic_dist_base = IOMEM(0xf0001000);
- void __iomem *gic_cpu_base = IOMEM(0xf0000100);
-
- /* use GIC to handle interrupts */
- gic_init(0, 29, gic_dist_base, gic_cpu_base);
gic_arch_extn.irq_set_wake = r8a7779_set_wake;
/* route all interrupts to ARM */
__raw_writel(0xbffffffc, INT2SMSKCR3);
__raw_writel(0x003fee3f, INT2SMSKCR4);
}
+
+void __init r8a7779_init_irq(void)
+{
+ void __iomem *gic_dist_base = IOMEM(0xf0001000);
+ void __iomem *gic_cpu_base = IOMEM(0xf0000100);
+
+ /* use GIC to handle interrupts */
+ gic_init(0, 29, gic_dist_base, gic_cpu_base);
+
+ r8a7779_init_irq_common();
+}
+
+#ifdef CONFIG_OF
+void __init r8a7779_init_irq_dt(void)
+{
+ irqchip_init();
+ r8a7779_init_irq_common();
+}
+#endif
return 0; /* always allow wakeup */
}
-#define RELOC_BASE 0x1200
-
-/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */
-#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
-
-INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
- INTCS_VECT_RELOC, "sh73a0-intca-irq-pins");
-
-static int to_gic_irq(struct irq_data *data)
-{
- unsigned int vect = irq2evt(data->irq) - INTCS_VECT_BASE;
-
- if (vect >= 0x3200)
- vect -= 0x3000;
- else
- vect -= 0x0200;
-
- return gic_spi((vect >> 5) + 1);
-}
-
-static int to_intca_reloc_irq(struct irq_data *data)
-{
- return data->irq + (RELOC_BASE >> 5);
-}
-
-#define irq_cb(cb, irq) irq_get_chip(irq)->cb(irq_get_irq_data(irq))
-#define irq_cbp(cb, irq, p...) irq_get_chip(irq)->cb(irq_get_irq_data(irq), p)
-
-static void intca_gic_enable(struct irq_data *data)
-{
- irq_cb(irq_unmask, to_intca_reloc_irq(data));
- irq_cb(irq_unmask, to_gic_irq(data));
-}
-
-static void intca_gic_disable(struct irq_data *data)
-{
- irq_cb(irq_mask, to_gic_irq(data));
- irq_cb(irq_mask, to_intca_reloc_irq(data));
-}
-
-static void intca_gic_mask_ack(struct irq_data *data)
-{
- irq_cb(irq_mask, to_gic_irq(data));
- irq_cb(irq_mask_ack, to_intca_reloc_irq(data));
-}
-
-static void intca_gic_eoi(struct irq_data *data)
-{
- irq_cb(irq_eoi, to_gic_irq(data));
-}
-
-static int intca_gic_set_type(struct irq_data *data, unsigned int type)
-{
- return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type);
-}
-
-#ifdef CONFIG_SMP
-static int intca_gic_set_affinity(struct irq_data *data,
- const struct cpumask *cpumask,
- bool force)
-{
- return irq_cbp(irq_set_affinity, to_gic_irq(data), cpumask, force);
-}
-#endif
-
-struct irq_chip intca_gic_irq_chip = {
- .name = "INTCA-GIC",
- .irq_mask = intca_gic_disable,
- .irq_unmask = intca_gic_enable,
- .irq_mask_ack = intca_gic_mask_ack,
- .irq_eoi = intca_gic_eoi,
- .irq_enable = intca_gic_enable,
- .irq_disable = intca_gic_disable,
- .irq_shutdown = intca_gic_disable,
- .irq_set_type = intca_gic_set_type,
- .irq_set_wake = sh73a0_set_wake,
-#ifdef CONFIG_SMP
- .irq_set_affinity = intca_gic_set_affinity,
-#endif
-};
-
-static int to_intc_vect(int irq)
-{
- unsigned int irq_pin = irq - gic_spi(1);
- unsigned int offs;
-
- if (irq_pin < 16)
- offs = 0x0200;
- else
- offs = 0x3000;
-
- return offs + (irq_pin << 5);
-}
-
-static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id)
-{
- generic_handle_irq(intcs_evt2irq(to_intc_vect(irq)));
- return IRQ_HANDLED;
-}
-
-static struct irqaction sh73a0_irq_pin_cascade[32];
-
#define PINTER0_PHYS 0xe69000a0
#define PINTER1_PHYS 0xe69000a4
#define PINTER0_VIRT IOMEM(0xe69000a0)
void __iomem *gic_dist_base = IOMEM(0xf0001000);
void __iomem *gic_cpu_base = IOMEM(0xf0000100);
void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
- int k, n;
gic_init(0, 29, gic_dist_base, gic_cpu_base);
gic_arch_extn.irq_set_wake = sh73a0_set_wake;
register_intc_controller(&intcs_desc);
- register_intc_controller(&intca_irq_pins_desc);
register_intc_controller(&intc_pint0_desc);
register_intc_controller(&intc_pint1_desc);
sh73a0_intcs_cascade.dev_id = intevtsa;
setup_irq(gic_spi(50), &sh73a0_intcs_cascade);
- /* IRQ pins require special handling through INTCA and GIC */
- for (k = 0; k < 32; k++) {
- sh73a0_irq_pin_cascade[k].name = "INTCA-GIC cascade";
- sh73a0_irq_pin_cascade[k].handler = sh73a0_irq_pin_demux;
- setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
-
- n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
- WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
- irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
- handle_level_irq, "level");
- set_irq_flags(n, IRQF_VALID); /* yuck */
- }
-
/* PINT pins are sanely tied to the GIC as SPI */
sh73a0_pint0_cascade.name = "PINT0 cascade";
sh73a0_pint0_cascade.handler = sh73a0_pint0_demux;
sh73a0_pint1_cascade.handler = sh73a0_pint1_demux;
setup_irq(gic_spi(34), &sh73a0_pint1_cascade);
}
-
-#ifdef CONFIG_OF
-void __init sh73a0_init_irq_dt(void)
-{
- irqchip_init();
- gic_arch_extn.irq_set_wake = sh73a0_set_wake;
-}
-#endif
ARRAY_SIZE(emev2_late_devices));
}
-void __init emev2_init_delay(void)
+static void __init emev2_init_delay(void)
{
shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
}
{ }
};
-void __init emev2_add_standard_devices_dt(void)
+static void __init emev2_add_standard_devices_dt(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
emev2_auxdata_lookup, NULL);
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/serial_sci.h>
#include <linux/sh_intc.h>
#include <linux/sh_timer.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/r8a7779.h>
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
- .irqs = SCIx_IRQ_MUXED(gic_spi(88)),
+ .irqs = SCIx_IRQ_MUXED(gic_iid(0x78)),
};
static struct platform_device scif0_device = {
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
- .irqs = SCIx_IRQ_MUXED(gic_spi(89)),
+ .irqs = SCIx_IRQ_MUXED(gic_iid(0x79)),
};
static struct platform_device scif1_device = {
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
- .irqs = SCIx_IRQ_MUXED(gic_spi(90)),
+ .irqs = SCIx_IRQ_MUXED(gic_iid(0x7a)),
};
static struct platform_device scif2_device = {
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
- .irqs = SCIx_IRQ_MUXED(gic_spi(91)),
+ .irqs = SCIx_IRQ_MUXED(gic_iid(0x7b)),
};
static struct platform_device scif3_device = {
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
- .irqs = SCIx_IRQ_MUXED(gic_spi(92)),
+ .irqs = SCIx_IRQ_MUXED(gic_iid(0x7c)),
};
static struct platform_device scif4_device = {
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
- .irqs = SCIx_IRQ_MUXED(gic_spi(93)),
+ .irqs = SCIx_IRQ_MUXED(gic_iid(0x7d)),
};
static struct platform_device scif5_device = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gic_spi(32),
+ .start = gic_iid(0x40),
.flags = IORESOURCE_IRQ,
},
};
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gic_spi(33),
+ .start = gic_iid(0x41),
.flags = IORESOURCE_IRQ,
},
};
.end = 0xffc70fff,
.flags = IORESOURCE_MEM,
}, {
- .start = gic_spi(79),
+ .start = gic_iid(0x6f),
.flags = IORESOURCE_IRQ,
},
};
.end = 0xffc71fff,
.flags = IORESOURCE_MEM,
}, {
- .start = gic_spi(82),
+ .start = gic_iid(0x72),
.flags = IORESOURCE_IRQ,
},
};
.end = 0xffc72fff,
.flags = IORESOURCE_MEM,
}, {
- .start = gic_spi(80),
+ .start = gic_iid(0x70),
.flags = IORESOURCE_IRQ,
},
};
.end = 0xffc73fff,
.flags = IORESOURCE_MEM,
}, {
- .start = gic_spi(81),
+ .start = gic_iid(0x71),
.flags = IORESOURCE_IRQ,
},
};
.num_resources = ARRAY_SIZE(rcar_i2c3_res),
};
-static struct platform_device *r8a7779_early_devices[] __initdata = {
+static struct resource sata_resources[] = {
+ [0] = {
+ .name = "rcar-sata",
+ .start = 0xfc600000,
+ .end = 0xfc601fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_iid(0x84),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sata_device = {
+ .name = "sata_rcar",
+ .id = -1,
+ .resource = sata_resources,
+ .num_resources = ARRAY_SIZE(sata_resources),
+ .dev = {
+ .dma_mask = &sata_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct platform_device *r8a7779_devices_dt[] __initdata = {
&scif0_device,
&scif1_device,
&scif2_device,
&scif5_device,
&tmu00_device,
&tmu01_device,
+};
+
+static struct platform_device *r8a7779_late_devices[] __initdata = {
&i2c0_device,
&i2c1_device,
&i2c2_device,
&i2c3_device,
-};
-
-static struct platform_device *r8a7779_late_devices[] __initdata = {
+ &sata_device,
};
void __init r8a7779_add_standard_devices(void)
r8a7779_init_pm_domains();
- platform_add_devices(r8a7779_early_devices,
- ARRAY_SIZE(r8a7779_early_devices));
+ platform_add_devices(r8a7779_devices_dt,
+ ARRAY_SIZE(r8a7779_devices_dt));
platform_add_devices(r8a7779_late_devices,
ARRAY_SIZE(r8a7779_late_devices));
}
void __init r8a7779_add_early_devices(void)
{
- early_platform_add_devices(r8a7779_early_devices,
- ARRAY_SIZE(r8a7779_early_devices));
+ early_platform_add_devices(r8a7779_devices_dt,
+ ARRAY_SIZE(r8a7779_devices_dt));
/* Early serial console setup is not included here due to
* memory map collisions. The SCIF serial ports in r8a7779
* command line in case of the marzen board.
*/
}
+
+#ifdef CONFIG_USE_OF
+void __init r8a7779_init_delay(void)
+{
+ shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */
+}
+
+static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = {
+ {},
+};
+
+void __init r8a7779_add_standard_devices_dt(void)
+{
+ /* clocks are setup late during boot in the case of DT */
+ r8a7779_clock_init();
+
+ platform_add_devices(r8a7779_devices_dt,
+ ARRAY_SIZE(r8a7779_devices_dt));
+ of_platform_populate(NULL, of_default_bus_match_table,
+ r8a7779_auxdata_lookup, NULL);
+}
+
+static const char *r8a7779_compat_dt[] __initdata = {
+ "renesas,r8a7779",
+ NULL,
+};
+
+DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
+ .map_io = r8a7779_map_io,
+ .init_early = r8a7779_init_delay,
+ .nr_irqs = NR_IRQS_LEGACY,
+ .init_irq = r8a7779_init_irq_dt,
+ .init_machine = r8a7779_add_standard_devices_dt,
+ .init_time = shmobile_timer_init,
+ .dt_compat = r8a7779_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/platform_device.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/sh_intc.h>
#include <linux/sh_timer.h>
#include <linux/platform_data/sh_ipmmu.h>
+#include <linux/platform_data/irq-renesas-intc-irqpin.h>
#include <mach/dma-register.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
.num_resources = ARRAY_SIZE(ipmmu_resources),
};
-static struct platform_device *sh73a0_early_devices_dt[] __initdata = {
+static struct renesas_intc_irqpin_config irqpin0_platform_data = {
+ .irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */
+};
+
+static struct resource irqpin0_resources[] = {
+ DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */
+ DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */
+ DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */
+ DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */
+ DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */
+ DEFINE_RES_IRQ(gic_spi(1)), /* IRQ0 */
+ DEFINE_RES_IRQ(gic_spi(2)), /* IRQ1 */
+ DEFINE_RES_IRQ(gic_spi(3)), /* IRQ2 */
+ DEFINE_RES_IRQ(gic_spi(4)), /* IRQ3 */
+ DEFINE_RES_IRQ(gic_spi(5)), /* IRQ4 */
+ DEFINE_RES_IRQ(gic_spi(6)), /* IRQ5 */
+ DEFINE_RES_IRQ(gic_spi(7)), /* IRQ6 */
+ DEFINE_RES_IRQ(gic_spi(8)), /* IRQ7 */
+};
+
+static struct platform_device irqpin0_device = {
+ .name = "renesas_intc_irqpin",
+ .id = 0,
+ .resource = irqpin0_resources,
+ .num_resources = ARRAY_SIZE(irqpin0_resources),
+ .dev = {
+ .platform_data = &irqpin0_platform_data,
+ },
+};
+
+static struct renesas_intc_irqpin_config irqpin1_platform_data = {
+ .irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */
+ .control_parent = true, /* Disable spurious IRQ10 */
+};
+
+static struct resource irqpin1_resources[] = {
+ DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */
+ DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */
+ DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */
+ DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */
+ DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */
+ DEFINE_RES_IRQ(gic_spi(9)), /* IRQ8 */
+ DEFINE_RES_IRQ(gic_spi(10)), /* IRQ9 */
+ DEFINE_RES_IRQ(gic_spi(11)), /* IRQ10 */
+ DEFINE_RES_IRQ(gic_spi(12)), /* IRQ11 */
+ DEFINE_RES_IRQ(gic_spi(13)), /* IRQ12 */
+ DEFINE_RES_IRQ(gic_spi(14)), /* IRQ13 */
+ DEFINE_RES_IRQ(gic_spi(15)), /* IRQ14 */
+ DEFINE_RES_IRQ(gic_spi(16)), /* IRQ15 */
+};
+
+static struct platform_device irqpin1_device = {
+ .name = "renesas_intc_irqpin",
+ .id = 1,
+ .resource = irqpin1_resources,
+ .num_resources = ARRAY_SIZE(irqpin1_resources),
+ .dev = {
+ .platform_data = &irqpin1_platform_data,
+ },
+};
+
+static struct renesas_intc_irqpin_config irqpin2_platform_data = {
+ .irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */
+};
+
+static struct resource irqpin2_resources[] = {
+ DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */
+ DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI20A */
+ DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ20A */
+ DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK20A */
+ DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR20A */
+ DEFINE_RES_IRQ(gic_spi(17)), /* IRQ16 */
+ DEFINE_RES_IRQ(gic_spi(18)), /* IRQ17 */
+ DEFINE_RES_IRQ(gic_spi(19)), /* IRQ18 */
+ DEFINE_RES_IRQ(gic_spi(20)), /* IRQ19 */
+ DEFINE_RES_IRQ(gic_spi(21)), /* IRQ20 */
+ DEFINE_RES_IRQ(gic_spi(22)), /* IRQ21 */
+ DEFINE_RES_IRQ(gic_spi(23)), /* IRQ22 */
+ DEFINE_RES_IRQ(gic_spi(24)), /* IRQ23 */
+};
+
+static struct platform_device irqpin2_device = {
+ .name = "renesas_intc_irqpin",
+ .id = 2,
+ .resource = irqpin2_resources,
+ .num_resources = ARRAY_SIZE(irqpin2_resources),
+ .dev = {
+ .platform_data = &irqpin2_platform_data,
+ },
+};
+
+static struct renesas_intc_irqpin_config irqpin3_platform_data = {
+ .irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */
+};
+
+static struct resource irqpin3_resources[] = {
+ DEFINE_RES_MEM(0xe690000c, 4), /* ICR4A */
+ DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */
+ DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */
+ DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */
+ DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */
+ DEFINE_RES_IRQ(gic_spi(25)), /* IRQ24 */
+ DEFINE_RES_IRQ(gic_spi(26)), /* IRQ25 */
+ DEFINE_RES_IRQ(gic_spi(27)), /* IRQ26 */
+ DEFINE_RES_IRQ(gic_spi(28)), /* IRQ27 */
+ DEFINE_RES_IRQ(gic_spi(29)), /* IRQ28 */
+ DEFINE_RES_IRQ(gic_spi(30)), /* IRQ29 */
+ DEFINE_RES_IRQ(gic_spi(31)), /* IRQ30 */
+ DEFINE_RES_IRQ(gic_spi(32)), /* IRQ31 */
+};
+
+static struct platform_device irqpin3_device = {
+ .name = "renesas_intc_irqpin",
+ .id = 3,
+ .resource = irqpin3_resources,
+ .num_resources = ARRAY_SIZE(irqpin3_resources),
+ .dev = {
+ .platform_data = &irqpin3_platform_data,
+ },
+};
+
+static struct platform_device *sh73a0_devices_dt[] __initdata = {
&scif0_device,
&scif1_device,
&scif2_device,
&dma0_device,
&mpdma0_device,
&pmu_device,
+ &irqpin0_device,
+ &irqpin1_device,
+ &irqpin2_device,
+ &irqpin3_device,
};
#define SRCR2 IOMEM(0xe61580b0)
/* Clear software reset bit on SY-DMAC module */
__raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2);
- platform_add_devices(sh73a0_early_devices_dt,
- ARRAY_SIZE(sh73a0_early_devices_dt));
+ platform_add_devices(sh73a0_devices_dt,
+ ARRAY_SIZE(sh73a0_devices_dt));
platform_add_devices(sh73a0_early_devices,
ARRAY_SIZE(sh73a0_early_devices));
platform_add_devices(sh73a0_late_devices,
void __init sh73a0_add_early_devices(void)
{
- early_platform_add_devices(sh73a0_early_devices_dt,
- ARRAY_SIZE(sh73a0_early_devices_dt));
+ early_platform_add_devices(sh73a0_devices_dt,
+ ARRAY_SIZE(sh73a0_devices_dt));
early_platform_add_devices(sh73a0_early_devices,
ARRAY_SIZE(sh73a0_early_devices));
#ifdef CONFIG_USE_OF
-/* Please note that the clock initialisation shcheme used in
- * sh73a0_add_early_devices_dt() and sh73a0_add_standard_devices_dt()
- * does not work with SMP as there is a yet to be resolved lock-up in
- * workqueue initialisation.
- *
- * CONFIG_SMP should be disabled when using this code.
- */
-
-void __init sh73a0_add_early_devices_dt(void)
+void __init sh73a0_init_delay(void)
{
shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */
-
- early_platform_add_devices(sh73a0_early_devices_dt,
- ARRAY_SIZE(sh73a0_early_devices_dt));
-
- /* setup early console here as well */
- shmobile_setup_console();
}
static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = {
/* clocks are setup late during boot in the case of DT */
sh73a0_clock_init();
- platform_add_devices(sh73a0_early_devices_dt,
- ARRAY_SIZE(sh73a0_early_devices_dt));
+ platform_add_devices(sh73a0_devices_dt,
+ ARRAY_SIZE(sh73a0_devices_dt));
of_platform_populate(NULL, of_default_bus_match_table,
sh73a0_auxdata_lookup, NULL);
}
};
DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
+ .smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
- .init_early = sh73a0_add_early_devices_dt,
+ .init_early = sh73a0_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
- .init_irq = sh73a0_init_irq_dt,
+ .init_irq = irqchip_init,
.init_machine = sh73a0_add_standard_devices_dt,
.init_time = shmobile_timer_init,
.dt_compat = sh73a0_boards_compat_dt,
#include <mach/emev2.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
-#include <asm/cacheflush.h>
#define EMEV2_SCU_BASE 0x1e000000
-static DEFINE_SPINLOCK(scu_lock);
-static void __iomem *scu_base;
-
-static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
-{
- unsigned long tmp;
-
- /* we assume this code is running on a different cpu
- * than the one that is changing coherency setting */
- spin_lock(&scu_lock);
- tmp = readl(scu_base + 8);
- tmp &= ~clr;
- tmp |= set;
- writel(tmp, scu_base + 8);
- spin_unlock(&scu_lock);
-
-}
-
-static unsigned int __init emev2_get_core_count(void)
-{
- if (!scu_base) {
- scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
- emev2_clock_init(); /* need ioremapped SMU */
- }
-
- WARN_ON_ONCE(!scu_base);
-
- return scu_base ? scu_get_core_count(scu_base) : 1;
-}
-
-static int emev2_platform_cpu_kill(unsigned int cpu)
-{
- return 0; /* not supported yet */
-}
-
-static int __maybe_unused emev2_cpu_kill(unsigned int cpu)
-{
- int k;
-
- /* this function is running on another CPU than the offline target,
- * here we need wait for shutdown code in platform_cpu_die() to
- * finish before asking SoC-specific code to power off the CPU core.
- */
- for (k = 0; k < 1000; k++) {
- if (shmobile_cpu_is_dead(cpu))
- return emev2_platform_cpu_kill(cpu);
- mdelay(1);
- }
-
- return 0;
-}
-
-
static void __cpuinit emev2_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- cpu = cpu_logical_map(cpu);
-
- /* enable cache coherency */
- modify_scu_cpu_psr(0, 3 << (cpu * 8));
-
- /* Tell ROM loader about our vector (in headsmp.S) */
- emev2_set_boot_vector(__pa(shmobile_secondary_vector));
-
- arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu_logical_map(cpu)));
return 0;
}
static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
{
- int cpu = cpu_logical_map(0);
+ scu_enable(shmobile_scu_base);
- scu_enable(scu_base);
+ /* Tell ROM loader about our vector (in headsmp-scu.S) */
+ emev2_set_boot_vector(__pa(shmobile_secondary_vector_scu));
- /* enable cache coherency on CPU0 */
- modify_scu_cpu_psr(0, 3 << (cpu * 8));
+ /* enable cache coherency on booting CPU */
+ scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
}
static void __init emev2_smp_init_cpus(void)
{
- unsigned int ncores = emev2_get_core_count();
+ unsigned int ncores;
+
+ /* setup EMEV2 specific SCU base */
+ shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
+ emev2_clock_init(); /* need ioremapped SMU */
+
+ ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1;
shmobile_smp_init_cpus(ncores);
}
.smp_prepare_cpus = emev2_smp_prepare_cpus,
.smp_secondary_init = emev2_secondary_init,
.smp_boot_secondary = emev2_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
- .cpu_kill = emev2_cpu_kill,
- .cpu_die = shmobile_cpu_die,
- .cpu_disable = shmobile_cpu_disable,
-#endif
};
#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <mach/r8a7779.h>
+#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
#define AVECR IOMEM(0xfe700040)
+#define R8A7779_SCU_BASE 0xf0000000
static struct r8a7779_pm_ch r8a7779_ch_cpu1 = {
.chan_offs = 0x40, /* PWRSR0 .. PWRER0 */
[3] = &r8a7779_ch_cpu3,
};
-static void __iomem *scu_base_addr(void)
-{
- return (void __iomem *)0xf0000000;
-}
-
-static DEFINE_SPINLOCK(scu_lock);
-static unsigned long tmp;
-
#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
-
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, R8A7779_SCU_BASE + 0x600, 29);
void __init r8a7779_register_twd(void)
{
twd_local_timer_register(&twd_local_timer);
}
#endif
-static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
-{
- void __iomem *scu_base = scu_base_addr();
-
- spin_lock(&scu_lock);
- tmp = __raw_readl(scu_base + 8);
- tmp &= ~clr;
- tmp |= set;
- spin_unlock(&scu_lock);
-
- /* disable cache coherency after releasing the lock */
- __raw_writel(tmp, scu_base + 8);
-}
-
-static unsigned int __init r8a7779_get_core_count(void)
-{
- void __iomem *scu_base = scu_base_addr();
-
- return scu_get_core_count(scu_base);
-}
-
static int r8a7779_platform_cpu_kill(unsigned int cpu)
{
struct r8a7779_pm_ch *ch = NULL;
cpu = cpu_logical_map(cpu);
- /* disable cache coherency */
- modify_scu_cpu_psr(3 << (cpu * 8), 0);
-
if (cpu < ARRAY_SIZE(r8a7779_ch_cpu))
ch = r8a7779_ch_cpu[cpu];
return ret ? ret : 1;
}
-static int __maybe_unused r8a7779_cpu_kill(unsigned int cpu)
-{
- int k;
-
- /* this function is running on another CPU than the offline target,
- * here we need wait for shutdown code in platform_cpu_die() to
- * finish before asking SoC-specific code to power off the CPU core.
- */
- for (k = 0; k < 1000; k++) {
- if (shmobile_cpu_is_dead(cpu))
- return r8a7779_platform_cpu_kill(cpu);
-
- mdelay(1);
- }
-
- return 0;
-}
-
-
static void __cpuinit r8a7779_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
cpu = cpu_logical_map(cpu);
- /* enable cache coherency */
- modify_scu_cpu_psr(0, 3 << (cpu * 8));
-
if (cpu < ARRAY_SIZE(r8a7779_ch_cpu))
ch = r8a7779_ch_cpu[cpu];
static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
{
- int cpu = cpu_logical_map(0);
+ scu_enable(shmobile_scu_base);
- scu_enable(scu_base_addr());
+ /* Map the reset vector (in headsmp-scu.S) */
+ __raw_writel(__pa(shmobile_secondary_vector_scu), AVECR);
- /* Map the reset vector (in headsmp.S) */
- __raw_writel(__pa(shmobile_secondary_vector), AVECR);
-
- /* enable cache coherency on CPU0 */
- modify_scu_cpu_psr(0, 3 << (cpu * 8));
+ /* enable cache coherency on booting CPU */
+ scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
r8a7779_pm_init();
static void __init r8a7779_smp_init_cpus(void)
{
- unsigned int ncores = r8a7779_get_core_count();
+ /* setup r8a7779 specific SCU base */
+ shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);
+
+ shmobile_smp_init_cpus(scu_get_core_count(shmobile_scu_base));
+}
- shmobile_smp_init_cpus(ncores);
+#ifdef CONFIG_HOTPLUG_CPU
+static int r8a7779_scu_psr_core_disabled(int cpu)
+{
+ unsigned long mask = 3 << (cpu * 8);
+
+ if ((__raw_readl(shmobile_scu_base + 8) & mask) == mask)
+ return 1;
+
+ return 0;
+}
+
+static int r8a7779_cpu_kill(unsigned int cpu)
+{
+ int k;
+
+ /* this function is running on another CPU than the offline target,
+ * here we need wait for shutdown code in platform_cpu_die() to
+ * finish before asking SoC-specific code to power off the CPU core.
+ */
+ for (k = 0; k < 1000; k++) {
+ if (r8a7779_scu_psr_core_disabled(cpu))
+ return r8a7779_platform_cpu_kill(cpu);
+
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+static void r8a7779_cpu_die(unsigned int cpu)
+{
+ dsb();
+ flush_cache_all();
+
+ /* disable cache coherency */
+ scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
+
+ /* Endless loop until power off from r8a7779_cpu_kill() */
+ while (1)
+ cpu_do_idle();
+}
+
+static int r8a7779_cpu_disable(unsigned int cpu)
+{
+ /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */
+ return cpu == 0 ? -EPERM : 0;
}
+#endif /* CONFIG_HOTPLUG_CPU */
struct smp_operations r8a7779_smp_ops __initdata = {
.smp_init_cpus = r8a7779_smp_init_cpus,
.smp_boot_secondary = r8a7779_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_kill = r8a7779_cpu_kill,
- .cpu_die = shmobile_cpu_die,
- .cpu_disable = shmobile_cpu_disable,
+ .cpu_die = r8a7779_cpu_die,
+ .cpu_disable = r8a7779_cpu_disable,
#endif
};
#define PSTR_SHUTDOWN_MODE 3
-static void __iomem *scu_base_addr(void)
-{
- return (void __iomem *)0xf0000000;
-}
+#define SH73A0_SCU_BASE 0xf0000000
#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, SH73A0_SCU_BASE + 0x600, 29);
void __init sh73a0_register_twd(void)
{
twd_local_timer_register(&twd_local_timer);
}
#endif
-static unsigned int __init sh73a0_get_core_count(void)
-{
- void __iomem *scu_base = scu_base_addr();
-
- return scu_get_core_count(scu_base);
-}
-
static void __cpuinit sh73a0_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
{
- scu_enable(scu_base_addr());
+ scu_enable(shmobile_scu_base);
- /* Map the reset vector (in headsmp-sh73a0.S) */
+ /* Map the reset vector (in headsmp-scu.S) */
__raw_writel(0, APARMBAREA); /* 4k */
- __raw_writel(__pa(sh73a0_secondary_vector), SBAR);
+ __raw_writel(__pa(shmobile_secondary_vector_scu), SBAR);
/* enable cache coherency on booting CPU */
- scu_power_mode(scu_base_addr(), SCU_PM_NORMAL);
+ scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
}
static void __init sh73a0_smp_init_cpus(void)
{
- unsigned int ncores = sh73a0_get_core_count();
+ /* setup sh73a0 specific SCU base */
+ shmobile_scu_base = IOMEM(SH73A0_SCU_BASE);
- shmobile_smp_init_cpus(ncores);
+ shmobile_smp_init_cpus(scu_get_core_count(shmobile_scu_base));
}
#ifdef CONFIG_HOTPLUG_CPU
flush_cache_all();
/* Set power off mode. This takes the CPU out of the MP cluster */
- scu_power_mode(scu_base_addr(), SCU_PM_POWEROFF);
+ scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
/* Enter shutdown mode */
cpu_do_idle();
}
+
+static int sh73a0_cpu_disable(unsigned int cpu)
+{
+ return 0; /* CPU0 and CPU1 supported */
+}
#endif /* CONFIG_HOTPLUG_CPU */
struct smp_operations sh73a0_smp_ops __initdata = {
#ifdef CONFIG_HOTPLUG_CPU
.cpu_kill = sh73a0_cpu_kill,
.cpu_die = sh73a0_cpu_die,
- .cpu_disable = shmobile_cpu_disable_any,
+ .cpu_disable = sh73a0_cpu_disable,
#endif
};
#define pr_fmt(fmt) "SPEAr3xx: " fmt
#include <linux/amba/pl022.h>
-#include <linux/amba/pl08x.h>
+#include <linux/amba/pl080.h>
#include <linux/io.h>
#include <plat/pl080.h>
#include <mach/generic.h>
obj-y += reset.o
obj-y += reset-handler.o
obj-y += sleep.o
+obj-y += tegra.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
-obj-$(CONFIG_ARCH_TEGRA_114_SOC) += board-dt-tegra114.o
+obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o
endif
+++ /dev/null
-/*
- * NVIDIA Tegra114 device tree board support
- *
- * Copyright (C) 2013 NVIDIA Corporation
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/clocksource.h>
-
-#include <asm/mach/arch.h>
-
-#include "board.h"
-#include "common.h"
-
-static void __init tegra114_dt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const tegra114_dt_board_compat[] = {
- "nvidia,tegra114",
- NULL,
-};
-
-DT_MACHINE_START(TEGRA114_DT, "NVIDIA Tegra114 (Flattened Device Tree)")
- .smp = smp_ops(tegra_smp_ops),
- .map_io = tegra_map_common_io,
- .init_early = tegra114_init_early,
- .init_irq = tegra_dt_init_irq,
- .init_time = clocksource_of_init,
- .init_machine = tegra114_dt_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
- .dt_compat = tegra114_dt_board_compat,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-tegra/board-dt-tegra30.c
- *
- * NVIDIA Tegra30 device tree board support
- *
- * Copyright (C) 2011 NVIDIA Corporation
- *
- * Derived from:
- *
- * arch/arm/mach-tegra/board-dt-tegra20.c
- *
- * Copyright (C) 2010 Secret Lab Technologies, Ltd.
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clocksource.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-#include "board.h"
-#include "common.h"
-#include "iomap.h"
-
-static void __init tegra30_dt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *tegra30_dt_board_compat[] = {
- "nvidia,tegra30",
- NULL
-};
-
-DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
- .smp = smp_ops(tegra_smp_ops),
- .map_io = tegra_map_common_io,
- .init_early = tegra30_init_early,
- .init_irq = tegra_dt_init_irq,
- .init_time = clocksource_of_init,
- .init_machine = tegra30_dt_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
- .dt_compat = tegra30_dt_board_compat,
-MACHINE_END
gpio_direction_output(en_vdd_1v05, 1);
regulator = regulator_get(NULL, "vdd_ldo0,vddio_pex_clk");
- if (IS_ERR_OR_NULL(regulator)) {
- pr_err("%s: regulator_get failed: %d\n", __func__,
- (int)PTR_ERR(regulator));
+ if (IS_ERR(regulator)) {
+ err = PTR_ERR(regulator);
+ pr_err("%s: regulator_get failed: %d\n", __func__, err);
goto err_reg;
}
- regulator_enable(regulator);
+ err = regulator_enable(regulator);
+ if (err) {
+ pr_err("%s: regulator_enable failed: %d\n", __func__, err);
+ goto err_en;
+ }
err = tegra_pcie_init(true, true);
if (err) {
err_pcie:
regulator_disable(regulator);
+err_en:
regulator_put(regulator);
err_reg:
gpio_free(en_vdd_1v05);
void tegra_assert_system_reset(char mode, const char *cmd);
-void __init tegra20_init_early(void);
-void __init tegra30_init_early(void);
-void __init tegra114_init_early(void);
+void __init tegra_init_early(void);
void __init tegra_map_common_io(void);
void __init tegra_init_irq(void);
void __init tegra_dt_init_irq(void);
#include "common.h"
#include "fuse.h"
#include "iomap.h"
+#include "irq.h"
#include "pmc.h"
#include "apbio.h"
#include "sleep.h"
void __init tegra_dt_init_irq(void)
{
tegra_clocks_init();
+ tegra_pmc_init();
tegra_init_irq();
irqchip_init();
+ tegra_legacy_irq_syscore_init();
}
#endif
}
-static void __init tegra_init_early(void)
+void __init tegra_init_early(void)
{
tegra_cpu_reset_handler_init();
tegra_apb_io_init();
tegra_init_fuse();
tegra_init_cache();
- tegra_pmc_init();
tegra_powergate_init();
+ tegra_hotplug_init();
}
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-void __init tegra20_init_early(void)
-{
- tegra_init_early();
- tegra20_hotplug_init();
-}
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-void __init tegra30_init_early(void)
-{
- tegra_init_early();
- tegra30_hotplug_init();
-}
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_114_SOC
-void __init tegra114_init_early(void)
-{
- tegra_init_early();
-}
-#endif
-
void __init tegra_init_late(void)
{
+ tegra_init_suspend();
tegra_powergate_debugfs_init();
}
struct cpuidle_driver *drv,
int index)
{
- struct cpuidle_state *state = &drv->states[index];
- u32 cpu_on_time = state->exit_latency;
- u32 cpu_off_time = state->target_residency - state->exit_latency;
-
while (tegra20_cpu_is_resettable_soon())
cpu_relax();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
- tegra_idle_lp2_last(cpu_on_time, cpu_off_time);
+ tegra_idle_lp2_last();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
struct cpuidle_driver *drv,
int index)
{
- struct cpuidle_state *state = &drv->states[index];
- u32 cpu_on_time = state->exit_latency;
- u32 cpu_off_time = state->target_residency - state->exit_latency;
-
/* All CPUs entering LP2 is not working.
* Don't let CPU0 enter LP2 when any secondary CPU is online.
*/
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
- tegra_idle_lp2_last(cpu_on_time, cpu_off_time);
+ tegra_idle_lp2_last();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
smp_wmb();
- save_cpu_arch_register();
-
cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
- restore_cpu_arch_register();
-
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
return true;
* arch/arm/mach-tegra/fuse.c
*
* Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Colin Cross <ccross@android.com>
tegra_fuse_spare_bit = TEGRA30_FUSE_SPARE_BIT;
tegra_init_speedo_data = &tegra30_init_speedo_data;
break;
+ case TEGRA114:
+ tegra_init_speedo_data = &tegra114_init_speedo_data;
+ break;
default:
pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id);
tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT;
/*
* Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Colin Cross <ccross@android.com>
static inline void tegra30_init_speedo_data(void) {}
#endif
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+void tegra114_init_speedo_data(void);
+#else
+static inline void tegra114_init_speedo_data(void) {}
+#endif
+
#endif
ENTRY(tegra_secondary_startup)
bl v7_invalidate_l1
- /* Enable coresight */
- mov32 r0, 0xC5ACCE55
- mcr p14, 0, r0, c7, c12, 6
b secondary_startup
ENDPROC(tegra_secondary_startup)
/*
- *
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
- * Copyright (c) 2010, 2012 NVIDIA Corporation. All rights reserved.
+ * Copyright (c) 2010, 2012-2013, NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
+#include "fuse.h"
#include "sleep.h"
static void (*tegra_hotplug_shutdown)(void);
return cpu == 0 ? -EPERM : 0;
}
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-extern void tegra20_hotplug_shutdown(void);
-void __init tegra20_hotplug_init(void)
+void __init tegra_hotplug_init(void)
{
- tegra_hotplug_shutdown = tegra20_hotplug_shutdown;
-}
-#endif
+ if (!IS_ENABLED(CONFIG_HOTPLUG_CPU))
+ return;
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-extern void tegra30_hotplug_shutdown(void);
-void __init tegra30_hotplug_init(void)
-{
- tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20)
+ tegra_hotplug_shutdown = tegra20_hotplug_shutdown;
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30)
+ tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
}
-#endif
* Author:
* Colin Cross <ccross@android.com>
*
- * Copyright (C) 2010, NVIDIA Corporation
+ * Copyright (C) 2010,2013, NVIDIA Corporation
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
#include <linux/io.h>
#include <linux/of.h>
#include <linux/irqchip/arm-gic.h>
+#include <linux/syscore_ops.h>
#include "board.h"
#include "iomap.h"
#define ICTLR_COP_IEP_CLASS 0x3c
#define FIRST_LEGACY_IRQ 32
+#define TEGRA_MAX_NUM_ICTLRS 5
#define SGI_MASK 0xFFFF
IO_ADDRESS(TEGRA_QUINARY_ICTLR_BASE),
};
+#ifdef CONFIG_PM_SLEEP
+static u32 cop_ier[TEGRA_MAX_NUM_ICTLRS];
+static u32 cop_iep[TEGRA_MAX_NUM_ICTLRS];
+static u32 cpu_ier[TEGRA_MAX_NUM_ICTLRS];
+static u32 cpu_iep[TEGRA_MAX_NUM_ICTLRS];
+
+static u32 ictlr_wake_mask[TEGRA_MAX_NUM_ICTLRS];
+#endif
+
bool tegra_pending_sgi(void)
{
u32 pending_set;
return 1;
}
+#ifdef CONFIG_PM_SLEEP
+static int tegra_set_wake(struct irq_data *d, unsigned int enable)
+{
+ u32 irq = d->irq;
+ u32 index, mask;
+
+ if (irq < FIRST_LEGACY_IRQ ||
+ irq >= FIRST_LEGACY_IRQ + num_ictlrs * 32)
+ return -EINVAL;
+
+ index = ((irq - FIRST_LEGACY_IRQ) / 32);
+ mask = BIT((irq - FIRST_LEGACY_IRQ) % 32);
+ if (enable)
+ ictlr_wake_mask[index] |= mask;
+ else
+ ictlr_wake_mask[index] &= ~mask;
+
+ return 0;
+}
+
+static int tegra_legacy_irq_suspend(void)
+{
+ unsigned long flags;
+ int i;
+
+ local_irq_save(flags);
+ for (i = 0; i < num_ictlrs; i++) {
+ void __iomem *ictlr = ictlr_reg_base[i];
+ /* Save interrupt state */
+ cpu_ier[i] = readl_relaxed(ictlr + ICTLR_CPU_IER);
+ cpu_iep[i] = readl_relaxed(ictlr + ICTLR_CPU_IEP_CLASS);
+ cop_ier[i] = readl_relaxed(ictlr + ICTLR_COP_IER);
+ cop_iep[i] = readl_relaxed(ictlr + ICTLR_COP_IEP_CLASS);
+
+ /* Disable COP interrupts */
+ writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR);
+
+ /* Disable CPU interrupts */
+ writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR);
+
+ /* Enable the wakeup sources of ictlr */
+ writel_relaxed(ictlr_wake_mask[i], ictlr + ICTLR_CPU_IER_SET);
+ }
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static void tegra_legacy_irq_resume(void)
+{
+ unsigned long flags;
+ int i;
+
+ local_irq_save(flags);
+ for (i = 0; i < num_ictlrs; i++) {
+ void __iomem *ictlr = ictlr_reg_base[i];
+ writel_relaxed(cpu_iep[i], ictlr + ICTLR_CPU_IEP_CLASS);
+ writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR);
+ writel_relaxed(cpu_ier[i], ictlr + ICTLR_CPU_IER_SET);
+ writel_relaxed(cop_iep[i], ictlr + ICTLR_COP_IEP_CLASS);
+ writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR);
+ writel_relaxed(cop_ier[i], ictlr + ICTLR_COP_IER_SET);
+ }
+ local_irq_restore(flags);
+}
+
+static struct syscore_ops tegra_legacy_irq_syscore_ops = {
+ .suspend = tegra_legacy_irq_suspend,
+ .resume = tegra_legacy_irq_resume,
+};
+
+int tegra_legacy_irq_syscore_init(void)
+{
+ register_syscore_ops(&tegra_legacy_irq_syscore_ops);
+
+ return 0;
+}
+#else
+#define tegra_set_wake NULL
+#endif
+
void __init tegra_init_irq(void)
{
int i;
gic_arch_extn.irq_mask = tegra_mask;
gic_arch_extn.irq_unmask = tegra_unmask;
gic_arch_extn.irq_retrigger = tegra_retrigger;
+ gic_arch_extn.irq_set_wake = tegra_set_wake;
+ gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND;
/*
* Check if there is a devicetree present, since the GIC will be
bool tegra_pending_sgi(void);
+#ifdef CONFIG_PM_SLEEP
+int tegra_legacy_irq_syscore_init(void);
+#else
+static inline int tegra_legacy_irq_syscore_init(void) { return 0; }
+#endif
+
#endif
#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
-#include <mach/powergate.h>
-
#include "fuse.h"
#include "flowctrl.h"
#include "reset.h"
+#include "pmc.h"
#include "common.h"
#include "iomap.h"
-extern void tegra_secondary_startup(void);
-
static cpumask_t tegra_cpu_init_mask;
-#define EVP_CPU_RESET_VECTOR \
- (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
-
static void __cpuinit tegra_secondary_init(unsigned int cpu)
{
/*
cpumask_set_cpu(cpu, &tegra_cpu_init_mask);
}
-static int tegra20_power_up_cpu(unsigned int cpu)
+
+static int tegra20_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- /* Enable the CPU clock. */
- tegra_enable_cpu_clock(cpu);
+ cpu = cpu_logical_map(cpu);
+
+ /*
+ * Force the CPU into reset. The CPU must remain in reset when
+ * the flow controller state is cleared (which will cause the
+ * flow controller to stop driving reset if the CPU has been
+ * power-gated via the flow controller). This will have no
+ * effect on first boot of the CPU since it should already be
+ * in reset.
+ */
+ tegra_put_cpu_in_reset(cpu);
- /* Clear flow controller CSR. */
- flowctrl_write_cpu_csr(cpu, 0);
+ /*
+ * Unhalt the CPU. If the flow controller was used to
+ * power-gate the CPU this will cause the flow controller to
+ * stop driving reset. The CPU will remain in reset because the
+ * clock and reset block is now driving reset.
+ */
+ flowctrl_write_cpu_halt(cpu, 0);
+ tegra_enable_cpu_clock(cpu);
+ flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */
+ tegra_cpu_out_of_reset(cpu);
return 0;
}
-static int tegra30_power_up_cpu(unsigned int cpu)
+static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- int ret, pwrgateid;
+ int ret;
unsigned long timeout;
- pwrgateid = tegra_cpu_powergate_id(cpu);
- if (pwrgateid < 0)
- return pwrgateid;
+ cpu = cpu_logical_map(cpu);
+ tegra_put_cpu_in_reset(cpu);
+ flowctrl_write_cpu_halt(cpu, 0);
/*
* The power up sequence of cold boot CPU and warm boot CPU
* the IO clamps.
* For cold boot CPU, do not wait. After the cold boot CPU be
* booted, it will run to tegra_secondary_init() and set
- * tegra_cpu_init_mask which influences what tegra30_power_up_cpu()
+ * tegra_cpu_init_mask which influences what tegra30_boot_secondary()
* next time around.
*/
if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) {
timeout = jiffies + msecs_to_jiffies(50);
do {
- if (!tegra_powergate_is_powered(pwrgateid))
+ if (tegra_pmc_cpu_is_powered(cpu))
goto remove_clamps;
udelay(10);
} while (time_before(jiffies, timeout));
* be un-gated by un-toggling the power gate register
* manually.
*/
- if (!tegra_powergate_is_powered(pwrgateid)) {
- ret = tegra_powergate_power_on(pwrgateid);
+ if (!tegra_pmc_cpu_is_powered(cpu)) {
+ ret = tegra_pmc_cpu_power_on(cpu);
if (ret)
return ret;
/* Wait for the power to come up. */
timeout = jiffies + msecs_to_jiffies(100);
- while (tegra_powergate_is_powered(pwrgateid)) {
+ while (tegra_pmc_cpu_is_powered(cpu)) {
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
udelay(10);
udelay(10);
/* Remove I/O clamps. */
- ret = tegra_powergate_remove_clamping(pwrgateid);
- udelay(10);
+ ret = tegra_pmc_cpu_remove_clamping(cpu);
+ if (ret)
+ return ret;
- /* Clear flow controller CSR. */
- flowctrl_write_cpu_csr(cpu, 0);
+ udelay(10);
+ flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */
+ tegra_cpu_out_of_reset(cpu);
return 0;
}
-static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int tegra114_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- int status;
-
cpu = cpu_logical_map(cpu);
+ return tegra_pmc_cpu_power_on(cpu);
+}
- /*
- * Force the CPU into reset. The CPU must remain in reset when the
- * flow controller state is cleared (which will cause the flow
- * controller to stop driving reset if the CPU has been power-gated
- * via the flow controller). This will have no effect on first boot
- * of the CPU since it should already be in reset.
- */
- tegra_put_cpu_in_reset(cpu);
-
- /*
- * Unhalt the CPU. If the flow controller was used to power-gate the
- * CPU this will cause the flow controller to stop driving reset.
- * The CPU will remain in reset because the clock and reset block
- * is now driving reset.
- */
- flowctrl_write_cpu_halt(cpu, 0);
-
- switch (tegra_chip_id) {
- case TEGRA20:
- status = tegra20_power_up_cpu(cpu);
- break;
- case TEGRA30:
- status = tegra30_power_up_cpu(cpu);
- break;
- default:
- status = -EINVAL;
- break;
- }
-
- if (status)
- goto done;
-
- /* Take the CPU out of reset. */
- tegra_cpu_out_of_reset(cpu);
-done:
- return status;
+static int __cpuinit tegra_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20)
+ return tegra20_boot_secondary(cpu, idle);
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30)
+ return tegra30_boot_secondary(cpu, idle);
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
+ return tegra114_boot_secondary(cpu, idle);
+
+ return -EINVAL;
}
static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
#include <linux/cpumask.h>
#include <linux/delay.h>
#include <linux/cpu_pm.h>
-#include <linux/clk.h>
+#include <linux/suspend.h>
#include <linux/err.h>
#include <linux/clk/tegra.h>
#include "reset.h"
#include "flowctrl.h"
#include "fuse.h"
+#include "pmc.h"
#include "sleep.h"
-#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */
-
-#define PMC_CTRL 0x0
-#define PMC_CPUPWRGOOD_TIMER 0xc8
-#define PMC_CPUPWROFF_TIMER 0xcc
-
#ifdef CONFIG_PM_SLEEP
-static unsigned int g_diag_reg;
static DEFINE_SPINLOCK(tegra_lp2_lock);
-static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
-static struct clk *tegra_pclk;
void (*tegra_tear_down_cpu)(void);
-void save_cpu_arch_register(void)
-{
- /* read diagnostic register */
- asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
- return;
-}
-
-void restore_cpu_arch_register(void)
-{
- /* write diagnostic register */
- asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
- return;
-}
-
-static void set_power_timers(unsigned long us_on, unsigned long us_off)
-{
- unsigned long long ticks;
- unsigned long long pclk;
- unsigned long rate;
- static unsigned long tegra_last_pclk;
-
- if (tegra_pclk == NULL) {
- tegra_pclk = clk_get_sys(NULL, "pclk");
- WARN_ON(IS_ERR(tegra_pclk));
- }
-
- rate = clk_get_rate(tegra_pclk);
-
- if (WARN_ON_ONCE(rate <= 0))
- pclk = 100000000;
- else
- pclk = rate;
-
- if ((rate != tegra_last_pclk)) {
- ticks = (us_on * pclk) + 999999ull;
- do_div(ticks, 1000000);
- writel((unsigned long)ticks, pmc + PMC_CPUPWRGOOD_TIMER);
-
- ticks = (us_off * pclk) + 999999ull;
- do_div(ticks, 1000000);
- writel((unsigned long)ticks, pmc + PMC_CPUPWROFF_TIMER);
- wmb();
- }
- tegra_last_pclk = pclk;
-}
-
/*
* restore_cpu_complex
*
tegra_cpu_clock_resume();
flowctrl_cpu_suspend_exit(cpu);
-
- restore_cpu_arch_register();
}
/*
tegra_cpu_clock_suspend();
flowctrl_cpu_suspend_enter(cpu);
-
- save_cpu_arch_register();
}
void tegra_clear_cpu_in_lp2(int phy_cpu_id)
return 0;
}
-void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time)
+void tegra_idle_lp2_last(void)
{
- u32 mode;
-
- /* Only the last cpu down does the final suspend steps */
- mode = readl(pmc + PMC_CTRL);
- mode |= TEGRA_POWER_CPU_PWRREQ_OE;
- writel(mode, pmc + PMC_CTRL);
-
- set_power_timers(cpu_on_time, cpu_off_time);
+ tegra_pmc_pm_set(TEGRA_SUSPEND_LP2);
cpu_cluster_pm_enter();
suspend_cpu_complex();
restore_cpu_complex();
cpu_cluster_pm_exit();
}
+
+enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
+ enum tegra_suspend_mode mode)
+{
+ /* Tegra114 didn't support any suspending mode yet. */
+ if (tegra_chip_id == TEGRA114)
+ return TEGRA_SUSPEND_NONE;
+
+ /*
+ * The Tegra devices only support suspending to LP2 currently.
+ */
+ if (mode > TEGRA_SUSPEND_LP2)
+ return TEGRA_SUSPEND_LP2;
+
+ return mode;
+}
+
+static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = {
+ [TEGRA_SUSPEND_NONE] = "none",
+ [TEGRA_SUSPEND_LP2] = "LP2",
+ [TEGRA_SUSPEND_LP1] = "LP1",
+ [TEGRA_SUSPEND_LP0] = "LP0",
+};
+
+static int __cpuinit tegra_suspend_enter(suspend_state_t state)
+{
+ enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
+
+ if (WARN_ON(mode < TEGRA_SUSPEND_NONE ||
+ mode >= TEGRA_MAX_SUSPEND_MODE))
+ return -EINVAL;
+
+ pr_info("Entering suspend state %s\n", lp_state[mode]);
+
+ tegra_pmc_pm_set(mode);
+
+ local_fiq_disable();
+
+ suspend_cpu_complex();
+ switch (mode) {
+ case TEGRA_SUSPEND_LP2:
+ tegra_set_cpu_in_lp2(0);
+ break;
+ default:
+ break;
+ }
+
+ cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+
+ switch (mode) {
+ case TEGRA_SUSPEND_LP2:
+ tegra_clear_cpu_in_lp2(0);
+ break;
+ default:
+ break;
+ }
+ restore_cpu_complex();
+
+ local_fiq_enable();
+
+ return 0;
+}
+
+static const struct platform_suspend_ops tegra_suspend_ops = {
+ .valid = suspend_valid_only_mem,
+ .enter = tegra_suspend_enter,
+};
+
+void __init tegra_init_suspend(void)
+{
+ if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE)
+ return;
+
+ tegra_pmc_suspend_init();
+
+ suspend_set_ops(&tegra_suspend_ops);
+}
#endif
#ifndef _MACH_TEGRA_PM_H_
#define _MACH_TEGRA_PM_H_
+#include "pmc.h"
+
extern unsigned long l2x0_saved_regs_addr;
void save_cpu_arch_register(void);
void tegra_clear_cpu_in_lp2(int phy_cpu_id);
bool tegra_set_cpu_in_lp2(int phy_cpu_id);
-void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time);
+void tegra_idle_lp2_last(void);
extern void (*tegra_tear_down_cpu)(void);
+#ifdef CONFIG_PM_SLEEP
+enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
+ enum tegra_suspend_mode mode);
+void tegra_init_suspend(void);
+#else
+enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
+ enum tegra_suspend_mode mode)
+{
+ return TEGRA_SUSPEND_NONE;
+}
+static inline void tegra_init_suspend(void) {}
+#endif
+
#endif /* _MACH_TEGRA_PM_H_ */
/*
- * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
+ * Copyright (C) 2012,2013 NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
*/
#include <linux/kernel.h>
+#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
-#include "iomap.h"
+#include "fuse.h"
+#include "pm.h"
+#include "pmc.h"
+#include "sleep.h"
-#define PMC_CTRL 0x0
-#define PMC_CTRL_INTR_LOW (1 << 17)
+#define TEGRA_POWER_EFFECT_LP0 (1 << 14) /* LP0 when CPU pwr gated */
+#define TEGRA_POWER_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */
+#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */
+
+#define PMC_CTRL 0x0
+#define PMC_CTRL_INTR_LOW (1 << 17)
+#define PMC_PWRGATE_TOGGLE 0x30
+#define PMC_PWRGATE_TOGGLE_START (1 << 8)
+#define PMC_REMOVE_CLAMPING 0x34
+#define PMC_PWRGATE_STATUS 0x38
+
+#define PMC_CPUPWRGOOD_TIMER 0xc8
+#define PMC_CPUPWROFF_TIMER 0xcc
+
+#define TEGRA_POWERGATE_PCIE 3
+#define TEGRA_POWERGATE_VDEC 4
+#define TEGRA_POWERGATE_CPU1 9
+#define TEGRA_POWERGATE_CPU2 10
+#define TEGRA_POWERGATE_CPU3 11
+
+static u8 tegra_cpu_domains[] = {
+ 0xFF, /* not available for CPU0 */
+ TEGRA_POWERGATE_CPU1,
+ TEGRA_POWERGATE_CPU2,
+ TEGRA_POWERGATE_CPU3,
+};
+static DEFINE_SPINLOCK(tegra_powergate_lock);
+
+static void __iomem *tegra_pmc_base;
+static bool tegra_pmc_invert_interrupt;
+static struct clk *tegra_pclk;
+
+struct pmc_pm_data {
+ u32 cpu_good_time; /* CPU power good time in uS */
+ u32 cpu_off_time; /* CPU power off time in uS */
+ u32 core_osc_time; /* Core power good osc time in uS */
+ u32 core_pmu_time; /* Core power good pmu time in uS */
+ u32 core_off_time; /* Core power off time in uS */
+ bool corereq_high; /* Core power request active-high */
+ bool sysclkreq_high; /* System clock request active-high */
+ bool combined_req; /* Combined pwr req for CPU & Core */
+ bool cpu_pwr_good_en; /* CPU power good signal is enabled */
+ u32 lp0_vec_phy_addr; /* The phy addr of LP0 warm boot code */
+ u32 lp0_vec_size; /* The size of LP0 warm boot code */
+ enum tegra_suspend_mode suspend_mode;
+};
+static struct pmc_pm_data pmc_pm_data;
static inline u32 tegra_pmc_readl(u32 reg)
{
- return readl(IO_ADDRESS(TEGRA_PMC_BASE + reg));
+ return readl(tegra_pmc_base + reg);
}
static inline void tegra_pmc_writel(u32 val, u32 reg)
{
- writel(val, IO_ADDRESS(TEGRA_PMC_BASE + reg));
+ writel(val, tegra_pmc_base + reg);
+}
+
+static int tegra_pmc_get_cpu_powerdomain_id(int cpuid)
+{
+ if (cpuid <= 0 || cpuid >= num_possible_cpus())
+ return -EINVAL;
+ return tegra_cpu_domains[cpuid];
+}
+
+static bool tegra_pmc_powergate_is_powered(int id)
+{
+ return (tegra_pmc_readl(PMC_PWRGATE_STATUS) >> id) & 1;
+}
+
+static int tegra_pmc_powergate_set(int id, bool new_state)
+{
+ bool old_state;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tegra_powergate_lock, flags);
+
+ old_state = tegra_pmc_powergate_is_powered(id);
+ WARN_ON(old_state == new_state);
+
+ tegra_pmc_writel(PMC_PWRGATE_TOGGLE_START | id, PMC_PWRGATE_TOGGLE);
+
+ spin_unlock_irqrestore(&tegra_powergate_lock, flags);
+
+ return 0;
+}
+
+static int tegra_pmc_powergate_remove_clamping(int id)
+{
+ u32 mask;
+
+ /*
+ * Tegra has a bug where PCIE and VDE clamping masks are
+ * swapped relatively to the partition ids.
+ */
+ if (id == TEGRA_POWERGATE_VDEC)
+ mask = (1 << TEGRA_POWERGATE_PCIE);
+ else if (id == TEGRA_POWERGATE_PCIE)
+ mask = (1 << TEGRA_POWERGATE_VDEC);
+ else
+ mask = (1 << id);
+
+ tegra_pmc_writel(mask, PMC_REMOVE_CLAMPING);
+
+ return 0;
+}
+
+bool tegra_pmc_cpu_is_powered(int cpuid)
+{
+ int id;
+
+ id = tegra_pmc_get_cpu_powerdomain_id(cpuid);
+ if (id < 0)
+ return false;
+ return tegra_pmc_powergate_is_powered(id);
}
-#ifdef CONFIG_OF
+int tegra_pmc_cpu_power_on(int cpuid)
+{
+ int id;
+
+ id = tegra_pmc_get_cpu_powerdomain_id(cpuid);
+ if (id < 0)
+ return id;
+ return tegra_pmc_powergate_set(id, true);
+}
+
+int tegra_pmc_cpu_remove_clamping(int cpuid)
+{
+ int id;
+
+ id = tegra_pmc_get_cpu_powerdomain_id(cpuid);
+ if (id < 0)
+ return id;
+ return tegra_pmc_powergate_remove_clamping(id);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void set_power_timers(u32 us_on, u32 us_off, unsigned long rate)
+{
+ unsigned long long ticks;
+ unsigned long long pclk;
+ static unsigned long tegra_last_pclk;
+
+ if (WARN_ON_ONCE(rate <= 0))
+ pclk = 100000000;
+ else
+ pclk = rate;
+
+ if ((rate != tegra_last_pclk)) {
+ ticks = (us_on * pclk) + 999999ull;
+ do_div(ticks, 1000000);
+ tegra_pmc_writel((unsigned long)ticks, PMC_CPUPWRGOOD_TIMER);
+
+ ticks = (us_off * pclk) + 999999ull;
+ do_div(ticks, 1000000);
+ tegra_pmc_writel((unsigned long)ticks, PMC_CPUPWROFF_TIMER);
+ wmb();
+ }
+ tegra_last_pclk = pclk;
+}
+
+enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void)
+{
+ return pmc_pm_data.suspend_mode;
+}
+
+void tegra_pmc_pm_set(enum tegra_suspend_mode mode)
+{
+ u32 reg;
+ unsigned long rate = 0;
+
+ reg = tegra_pmc_readl(PMC_CTRL);
+ reg |= TEGRA_POWER_CPU_PWRREQ_OE;
+ reg &= ~TEGRA_POWER_EFFECT_LP0;
+
+ switch (mode) {
+ case TEGRA_SUSPEND_LP2:
+ rate = clk_get_rate(tegra_pclk);
+ break;
+ default:
+ break;
+ }
+
+ set_power_timers(pmc_pm_data.cpu_good_time, pmc_pm_data.cpu_off_time,
+ rate);
+
+ tegra_pmc_writel(reg, PMC_CTRL);
+}
+
+void tegra_pmc_suspend_init(void)
+{
+ u32 reg;
+
+ /* Always enable CPU power request */
+ reg = tegra_pmc_readl(PMC_CTRL);
+ reg |= TEGRA_POWER_CPU_PWRREQ_OE;
+ tegra_pmc_writel(reg, PMC_CTRL);
+}
+#endif
+
static const struct of_device_id matches[] __initconst = {
+ { .compatible = "nvidia,tegra114-pmc" },
+ { .compatible = "nvidia,tegra30-pmc" },
{ .compatible = "nvidia,tegra20-pmc" },
{ }
};
-#endif
-void __init tegra_pmc_init(void)
+static void tegra_pmc_parse_dt(void)
{
- /*
- * For now, Harmony is the only board that uses the PMC, and it wants
- * the signal inverted. Seaboard would too if it used the PMC.
- * Hopefully by the time other boards want to use the PMC, everything
- * will be device-tree, or they also want it inverted.
- */
- bool invert_interrupt = true;
- u32 val;
+ struct device_node *np;
+ u32 prop;
+ enum tegra_suspend_mode suspend_mode;
+ u32 core_good_time[2] = {0, 0};
+ u32 lp0_vec[2] = {0, 0};
-#ifdef CONFIG_OF
- if (of_have_populated_dt()) {
- struct device_node *np;
+ np = of_find_matching_node(NULL, matches);
+ BUG_ON(!np);
- invert_interrupt = false;
+ tegra_pmc_base = of_iomap(np, 0);
- np = of_find_matching_node(NULL, matches);
- if (np) {
- if (of_find_property(np, "nvidia,invert-interrupt",
- NULL))
- invert_interrupt = true;
+ tegra_pmc_invert_interrupt = of_property_read_bool(np,
+ "nvidia,invert-interrupt");
+ tegra_pclk = of_clk_get_by_name(np, "pclk");
+ WARN_ON(IS_ERR(tegra_pclk));
+
+ /* Grabbing the power management configurations */
+ if (of_property_read_u32(np, "nvidia,suspend-mode", &prop)) {
+ suspend_mode = TEGRA_SUSPEND_NONE;
+ } else {
+ switch (prop) {
+ case 0:
+ suspend_mode = TEGRA_SUSPEND_LP0;
+ break;
+ case 1:
+ suspend_mode = TEGRA_SUSPEND_LP1;
+ break;
+ case 2:
+ suspend_mode = TEGRA_SUSPEND_LP2;
+ break;
+ default:
+ suspend_mode = TEGRA_SUSPEND_NONE;
+ break;
}
}
-#endif
+ suspend_mode = tegra_pm_validate_suspend_mode(suspend_mode);
+
+ if (of_property_read_u32(np, "nvidia,cpu-pwr-good-time", &prop))
+ suspend_mode = TEGRA_SUSPEND_NONE;
+ pmc_pm_data.cpu_good_time = prop;
+
+ if (of_property_read_u32(np, "nvidia,cpu-pwr-off-time", &prop))
+ suspend_mode = TEGRA_SUSPEND_NONE;
+ pmc_pm_data.cpu_off_time = prop;
+
+ if (of_property_read_u32_array(np, "nvidia,core-pwr-good-time",
+ core_good_time, ARRAY_SIZE(core_good_time)))
+ suspend_mode = TEGRA_SUSPEND_NONE;
+ pmc_pm_data.core_osc_time = core_good_time[0];
+ pmc_pm_data.core_pmu_time = core_good_time[1];
+
+ if (of_property_read_u32(np, "nvidia,core-pwr-off-time",
+ &prop))
+ suspend_mode = TEGRA_SUSPEND_NONE;
+ pmc_pm_data.core_off_time = prop;
+
+ pmc_pm_data.corereq_high = of_property_read_bool(np,
+ "nvidia,core-power-req-active-high");
+
+ pmc_pm_data.sysclkreq_high = of_property_read_bool(np,
+ "nvidia,sys-clock-req-active-high");
+
+ pmc_pm_data.combined_req = of_property_read_bool(np,
+ "nvidia,combined-power-req");
+
+ pmc_pm_data.cpu_pwr_good_en = of_property_read_bool(np,
+ "nvidia,cpu-pwr-good-en");
+
+ if (of_property_read_u32_array(np, "nvidia,lp0-vec", lp0_vec,
+ ARRAY_SIZE(lp0_vec)))
+ if (suspend_mode == TEGRA_SUSPEND_LP0)
+ suspend_mode = TEGRA_SUSPEND_LP1;
+
+ pmc_pm_data.lp0_vec_phy_addr = lp0_vec[0];
+ pmc_pm_data.lp0_vec_size = lp0_vec[1];
+
+ pmc_pm_data.suspend_mode = suspend_mode;
+}
+
+void __init tegra_pmc_init(void)
+{
+ u32 val;
+
+ tegra_pmc_parse_dt();
val = tegra_pmc_readl(PMC_CTRL);
- if (invert_interrupt)
+ if (tegra_pmc_invert_interrupt)
val |= PMC_CTRL_INTR_LOW;
else
val &= ~PMC_CTRL_INTR_LOW;
#ifndef __MACH_TEGRA_PMC_H
#define __MACH_TEGRA_PMC_H
+enum tegra_suspend_mode {
+ TEGRA_SUSPEND_NONE = 0,
+ TEGRA_SUSPEND_LP2, /* CPU voltage off */
+ TEGRA_SUSPEND_LP1, /* CPU voltage off, DRAM self-refresh */
+ TEGRA_SUSPEND_LP0, /* CPU + core voltage off, DRAM self-refresh */
+ TEGRA_MAX_SUSPEND_MODE,
+};
+
+#ifdef CONFIG_PM_SLEEP
+enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
+void tegra_pmc_pm_set(enum tegra_suspend_mode mode);
+void tegra_pmc_suspend_init(void);
+#endif
+
+bool tegra_pmc_cpu_is_powered(int cpuid);
+int tegra_pmc_cpu_power_on(int cpuid);
+int tegra_pmc_cpu_remove_clamping(int cpuid);
+
void tegra_pmc_init(void);
#endif
*/
ENTRY(tegra_resume)
bl v7_invalidate_l1
- /* Enable coresight */
- mov32 r0, 0xC5ACCE55
- mcr p14, 0, r0, c7, c12, 6
cpu_id r0
cmp r0, #0 @ CPU0?
*
* Register usage within the reset handler:
*
+ * Others: scratch
+ * R6 = SoC ID << 8
* R7 = CPU present (to the OS) mask
* R8 = CPU in LP1 state mask
* R9 = CPU in LP2 state mask
ENTRY(__tegra_cpu_reset_handler)
cpsid aif, 0x13 @ SVC mode, interrupts disabled
+
+ mov32 r6, TEGRA_APB_MISC_BASE
+ ldr r6, [r6, #APB_MISC_GP_HIDREV]
+ and r6, r6, #0xff00
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+t20_check:
+ cmp r6, #(0x20 << 8)
+ bne after_t20_check
+t20_errata:
+ # Tegra20 is a Cortex-A9 r1p1
+ mrc p15, 0, r0, c1, c0, 0 @ read system control register
+ orr r0, r0, #1 << 14 @ erratum 716044
+ mcr p15, 0, r0, c1, c0, 0 @ write system control register
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 4 @ erratum 742230
+ orr r0, r0, #1 << 11 @ erratum 751472
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+ b after_errata
+after_t20_check:
+#endif
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+t30_check:
+ cmp r6, #(0x30 << 8)
+ bne after_t30_check
+t30_errata:
+ # Tegra30 is a Cortex-A9 r2p9
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 6 @ erratum 743622
+ orr r0, r0, #1 << 11 @ erratum 751472
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+ b after_errata
+after_t30_check:
+#endif
+after_errata:
mrc p15, 0, r10, c0, c0, 5 @ MPIDR
and r10, r10, #0x3 @ R10 = CPU number
mov r11, #1
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
/* Are we on Tegra20? */
- mov32 r6, TEGRA_APB_MISC_BASE
- ldr r0, [r6, #APB_MISC_GP_HIDREV]
- and r0, r0, #0xff00
- cmp r0, #(0x20 << 8)
+ cmp r6, #(0x20 << 8)
bne 1f
/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
- mov32 r6, TEGRA_PMC_BASE
+ mov32 r5, TEGRA_PMC_BASE
mov r0, #0
cmp r10, #0
- strne r0, [r6, #PMC_SCRATCH41]
+ strne r0, [r5, #PMC_SCRATCH41]
1:
#endif
/*
- * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
void tegra_disable_clean_inv_dcache(void);
#ifdef CONFIG_HOTPLUG_CPU
-void tegra20_hotplug_init(void);
-void tegra30_hotplug_init(void);
+void tegra20_hotplug_shutdown(void);
+void tegra30_hotplug_shutdown(void);
+void tegra_hotplug_init(void);
#else
-static inline void tegra20_hotplug_init(void) {}
-static inline void tegra30_hotplug_init(void) {}
+static inline void tegra_hotplug_init(void) {}
#endif
void tegra20_cpu_shutdown(int cpu);
/*
- * nVidia Tegra device tree board support
+ * NVIDIA Tegra SoC device tree board support
*
+ * Copyright (C) 2011, 2013, NVIDIA Corporation
* Copyright (C) 2010 Secret Lab Technologies, Ltd.
* Copyright (C) 2010 Google, Inc.
*
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c-tegra.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include <linux/usb/tegra_usb_phy.h>
+#include <linux/clk/tegra.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "board.h"
#include "common.h"
+#include "fuse.h"
#include "iomap.h"
static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
static void __init tegra_dt_init(void)
{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ struct device *parent = NULL;
+
+ tegra_clocks_apply_init_table();
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ goto out;
+
+ soc_dev_attr->family = kasprintf(GFP_KERNEL, "Tegra");
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d", tegra_revision);
+ soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%d", tegra_chip_id);
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->family);
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr->soc_id);
+ kfree(soc_dev_attr);
+ goto out;
+ }
+
+ parent = soc_device_to_device(soc_dev);
+
/*
* Finished with the static registrations now; fill in the missing
* devices
*/
+out:
of_platform_populate(NULL, of_default_bus_match_table,
- tegra20_auxdata_lookup, NULL);
+ tegra20_auxdata_lookup, parent);
}
static void __init trimslice_init(void)
static void __init paz00_init(void)
{
- tegra_paz00_wifikill_init();
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+ tegra_paz00_wifikill_init();
}
static struct {
}
}
-static const char *tegra20_dt_board_compat[] = {
+static const char * const tegra_dt_board_compat[] = {
+ "nvidia,tegra114",
+ "nvidia,tegra30",
"nvidia,tegra20",
NULL
};
-DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
+DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)")
.map_io = tegra_map_common_io,
.smp = smp_ops(tegra_smp_ops),
- .init_early = tegra20_init_early,
+ .init_early = tegra_init_early,
.init_irq = tegra_dt_init_irq,
.init_time = clocksource_of_init,
.init_machine = tegra_dt_init,
.init_late = tegra_dt_init_late,
.restart = tegra_assert_system_reset,
- .dt_compat = tegra20_dt_board_compat,
+ .dt_compat = tegra_dt_board_compat,
MACHINE_END
--- /dev/null
+/*
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bug.h>
+
+#include "fuse.h"
+
+#define CORE_PROCESS_CORNERS_NUM 2
+#define CPU_PROCESS_CORNERS_NUM 2
+
+enum {
+ THRESHOLD_INDEX_0,
+ THRESHOLD_INDEX_1,
+ THRESHOLD_INDEX_COUNT,
+};
+
+static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = {
+ {1123, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = {
+ {1695, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static void rev_sku_to_speedo_ids(int rev, int sku, int *threshold)
+{
+ u32 tmp;
+
+ switch (sku) {
+ case 0x00:
+ case 0x10:
+ case 0x05:
+ case 0x06:
+ tegra_cpu_speedo_id = 1;
+ tegra_soc_speedo_id = 0;
+ *threshold = THRESHOLD_INDEX_0;
+ break;
+
+ case 0x03:
+ case 0x04:
+ tegra_cpu_speedo_id = 2;
+ tegra_soc_speedo_id = 1;
+ *threshold = THRESHOLD_INDEX_1;
+ break;
+
+ default:
+ pr_err("Tegra114 Unknown SKU %d\n", sku);
+ tegra_cpu_speedo_id = 0;
+ tegra_soc_speedo_id = 0;
+ *threshold = THRESHOLD_INDEX_0;
+ break;
+ }
+
+ if (rev == TEGRA_REVISION_A01) {
+ tmp = tegra_fuse_readl(0x270) << 1;
+ tmp |= tegra_fuse_readl(0x26c);
+ if (!tmp)
+ tegra_cpu_speedo_id = 0;
+ }
+}
+
+void tegra114_init_speedo_data(void)
+{
+ u32 cpu_speedo_val;
+ u32 core_speedo_val;
+ int threshold;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+ BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+
+ rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id, &threshold);
+
+ cpu_speedo_val = tegra_fuse_readl(0x12c) + 1024;
+ core_speedo_val = tegra_fuse_readl(0x134);
+
+ for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++)
+ if (cpu_speedo_val < cpu_process_speedos[threshold][i])
+ break;
+ tegra_cpu_process_id = i;
+
+ for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++)
+ if (core_speedo_val < core_process_speedos[threshold][i])
+ break;
+ tegra_core_process_id = i;
+}
int i;
WARN_ON(pdev->dev.platform_data);
- BUG_ON(IS_ERR_OR_NULL(c));
+ BUG_ON(IS_ERR(c));
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
pdata->tables = devm_kzalloc(&pdev->dev, sizeof(*pdata->tables),
PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE);
BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
+ PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
+ PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED|
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func)
#define DB8500_PIN_HOG(pin,conf) \
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf)
-#define DB8500_PIN_SLEEP(pin, conf, dev) \
- PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \
- pin, conf)
/* These are default states associated with device and changed runtime */
#define DB8500_MUX(group,func,dev) \
DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */
/* Mux in USB pins, drive STP high */
- DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"),
- DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */
+ /* USB default state */
+ DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"),
+ DB8500_PIN("GPIO257_AE29", out_hi, "ab8500-usb.0"), /* STP */
+ /* USB sleep state */
+ DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */
+ DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */
+ DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */
+ DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */
+ DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */
+ DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */
+ DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */
+ DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */
+ DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */
+ DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */
+ DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */
+ DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */
+
/* Mux in SPI2 pins on the "other C1" altfunction */
DB8500_MUX("spi2_oc1_2", "spi2", "spi2"),
DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */
DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
/* SPI2 idle state */
- DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
- DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
- DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
+ DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
+ DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
+ DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
/* SPI2 sleep state */
DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */
DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
DB8500_PIN_HOG("GPIO21_AB3", out_hi),
/* Mux in "SM" which is used for the SMSC911x Ethernet adapter */
DB8500_MUX_HOG("sm_b_1", "sm"),
+ /* User LED */
+ DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi),
/* Drive RSTn_LAN high */
DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi),
/* Accelerometer/Magnetometer */
#endif
struct mmci_platform_data mop500_sdi0_data = {
- .ios_handler = mop500_sdi0_ios_handler,
.ocr_mask = MMC_VDD_29_30,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA |
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-nomadik.h>
regulator_put(prox_regulator);
}
+void mop500_snowball_ethernet_clock_enable(void)
+{
+ struct clk *clk;
+
+ clk = clk_get_sys("fsmc", NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+}
+
static struct cryp_platform_data u8500_cryp1_platform_data = {
.mem_to_engine = {
.dir = STEDMA40_MEM_TO_PERIPH,
mop500_audio_init(parent);
mop500_uart_init(parent);
+ mop500_snowball_ethernet_clock_enable();
+
/* This board has full regulator constraints */
regulator_has_full_constraints();
}
void __init snowball_pinmaps_init(void);
void __init hrefv60_pinmaps_init(void);
void mop500_audio_init(struct device *parent);
+void mop500_snowball_ethernet_clock_enable(void);
int __init mop500_uib_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
/* Pinmaps must be in place before devices register */
if (of_machine_is_compatible("st-ericsson,mop500"))
mop500_pinmaps_init();
- else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+ else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
snowball_pinmaps_init();
- else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+ mop500_snowball_ethernet_clock_enable();
+ } else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
hrefv60_pinmaps_init();
else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
/* TODO: Add pinmaps for ccu9540 board. */
soc_info_populate(soc_dev_attr, soc_id);
soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR_OR_NULL(soc_dev)) {
+ if (IS_ERR(soc_dev)) {
kfree(soc_dev_attr);
return NULL;
}
parent = soc_device_to_device(soc_dev);
- if (!IS_ERR_OR_NULL(parent))
- device_create_file(parent, &ux500_soc_attr);
+ device_create_file(parent, &ux500_soc_attr);
return parent;
}
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select VT8500_TIMER
+ select PINCTRL
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
-obj-$(CONFIG_ARCH_VT8500) += irq.o vt8500.o
+obj-$(CONFIG_ARCH_VT8500) += vt8500.o
#include <linux/of.h>
-int __init vt8500_irq_init(struct device_node *node,
- struct device_node *parent);
-
/* defined in drivers/clk/clk-vt8500.c */
void __init vtwm_clk_init(void __iomem *pmc_base);
-/* defined in irq.c */
-asmlinkage void vt8500_handle_irq(struct pt_regs *regs);
-
#endif
#include <linux/clocksource.h>
#include <linux/io.h>
+#include <linux/irqchip.h>
#include <linux/pm.h>
#include <asm/mach-types.h>
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const struct of_device_id vt8500_irq_match[] __initconst = {
- { .compatible = "via,vt8500-intc", .data = vt8500_irq_init, },
- { /* sentinel */ },
-};
-
-static void __init vt8500_init_irq(void)
-{
- of_irq_init(vt8500_irq_match);
-};
-
static const char * const vt8500_dt_compat[] = {
"via,vt8500",
"wm,wm8650",
DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
.dt_compat = vt8500_dt_compat,
.map_io = vt8500_map_io,
- .init_irq = vt8500_init_irq,
+ .init_irq = irqchip_init,
.init_machine = vt8500_init,
.init_time = clocksource_of_init,
.restart = vt8500_restart,
- .handle_irq = vt8500_handle_irq,
MACHINE_END
select MIGHT_HAVE_CACHE_L2X0
select USE_OF
select SPARSE_IRQ
+ select CADENCE_TTC_TIMER
help
Support for Xilinx Zynq ARM Cortex A9 Platform
#
# Common support
-obj-y := common.o timer.o
+obj-y := common.o
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/clk/zynq.h>
+#include <linux/clocksource.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
xilinx_zynq_clocks_init(slcr);
- xttcps_timer_init();
+ clocksource_of_init();
}
/**
#ifndef __MACH_ZYNQ_COMMON_H__
#define __MACH_ZYNQ_COMMON_H__
-void __init xttcps_timer_init(void);
-
#endif
+++ /dev/null
-/*
- * This file contains driver for the Xilinx PS Timer Counter IP.
- *
- * Copyright (C) 2011 Xilinx
- *
- * based on arch/mips/kernel/time.c timer driver
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/slab.h>
-#include <linux/clk-provider.h>
-#include "common.h"
-
-/*
- * Timer Register Offset Definitions of Timer 1, Increment base address by 4
- * and use same offsets for Timer 2
- */
-#define XTTCPS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */
-#define XTTCPS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */
-#define XTTCPS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */
-#define XTTCPS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */
-#define XTTCPS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */
-#define XTTCPS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */
-
-#define XTTCPS_CNT_CNTRL_DISABLE_MASK 0x1
-
-/*
- * Setup the timers to use pre-scaling, using a fixed value for now that will
- * work across most input frequency, but it may need to be more dynamic
- */
-#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */
-#define PRESCALE 2048 /* The exponent must match this */
-#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1)
-#define CLK_CNTRL_PRESCALE_EN 1
-#define CNT_CNTRL_RESET (1<<4)
-
-/**
- * struct xttcps_timer - This definition defines local timer structure
- *
- * @base_addr: Base address of timer
- **/
-struct xttcps_timer {
- void __iomem *base_addr;
-};
-
-struct xttcps_timer_clocksource {
- struct xttcps_timer xttc;
- struct clocksource cs;
-};
-
-#define to_xttcps_timer_clksrc(x) \
- container_of(x, struct xttcps_timer_clocksource, cs)
-
-struct xttcps_timer_clockevent {
- struct xttcps_timer xttc;
- struct clock_event_device ce;
- struct clk *clk;
-};
-
-#define to_xttcps_timer_clkevent(x) \
- container_of(x, struct xttcps_timer_clockevent, ce)
-
-/**
- * xttcps_set_interval - Set the timer interval value
- *
- * @timer: Pointer to the timer instance
- * @cycles: Timer interval ticks
- **/
-static void xttcps_set_interval(struct xttcps_timer *timer,
- unsigned long cycles)
-{
- u32 ctrl_reg;
-
- /* Disable the counter, set the counter value and re-enable counter */
- ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
- ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-
- __raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET);
-
- /*
- * Reset the counter (0x10) so that it starts from 0, one-shot
- * mode makes this needed for timing to be right.
- */
- ctrl_reg |= CNT_CNTRL_RESET;
- ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-}
-
-/**
- * xttcps_clock_event_interrupt - Clock event timer interrupt handler
- *
- * @irq: IRQ number of the Timer
- * @dev_id: void pointer to the xttcps_timer instance
- *
- * returns: Always IRQ_HANDLED - success
- **/
-static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id)
-{
- struct xttcps_timer_clockevent *xttce = dev_id;
- struct xttcps_timer *timer = &xttce->xttc;
-
- /* Acknowledge the interrupt and call event handler */
- __raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET);
-
- xttce->ce.event_handler(&xttce->ce);
-
- return IRQ_HANDLED;
-}
-
-/**
- * __xttc_clocksource_read - Reads the timer counter register
- *
- * returns: Current timer counter register value
- **/
-static cycle_t __xttc_clocksource_read(struct clocksource *cs)
-{
- struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc;
-
- return (cycle_t)__raw_readl(timer->base_addr +
- XTTCPS_COUNT_VAL_OFFSET);
-}
-
-/**
- * xttcps_set_next_event - Sets the time interval for next event
- *
- * @cycles: Timer interval ticks
- * @evt: Address of clock event instance
- *
- * returns: Always 0 - success
- **/
-static int xttcps_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
- struct xttcps_timer *timer = &xttce->xttc;
-
- xttcps_set_interval(timer, cycles);
- return 0;
-}
-
-/**
- * xttcps_set_mode - Sets the mode of timer
- *
- * @mode: Mode to be set
- * @evt: Address of clock event instance
- **/
-static void xttcps_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
- struct xttcps_timer *timer = &xttce->xttc;
- u32 ctrl_reg;
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- xttcps_set_interval(timer,
- DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk),
- PRESCALE * HZ));
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- ctrl_reg = __raw_readl(timer->base_addr +
- XTTCPS_CNT_CNTRL_OFFSET);
- ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg,
- timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
- break;
- case CLOCK_EVT_MODE_RESUME:
- ctrl_reg = __raw_readl(timer->base_addr +
- XTTCPS_CNT_CNTRL_OFFSET);
- ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg,
- timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
- break;
- }
-}
-
-static void __init zynq_ttc_setup_clocksource(struct device_node *np,
- void __iomem *base)
-{
- struct xttcps_timer_clocksource *ttccs;
- struct clk *clk;
- int err;
- u32 reg;
-
- ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL);
- if (WARN_ON(!ttccs))
- return;
-
- err = of_property_read_u32(np, "reg", ®);
- if (WARN_ON(err))
- return;
-
- clk = of_clk_get_by_name(np, "cpu_1x");
- if (WARN_ON(IS_ERR(clk)))
- return;
-
- err = clk_prepare_enable(clk);
- if (WARN_ON(err))
- return;
-
- ttccs->xttc.base_addr = base + reg * 4;
-
- ttccs->cs.name = np->name;
- ttccs->cs.rating = 200;
- ttccs->cs.read = __xttc_clocksource_read;
- ttccs->cs.mask = CLOCKSOURCE_MASK(16);
- ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
-
- __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPS_IER_OFFSET);
- __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
- ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
- __raw_writel(CNT_CNTRL_RESET,
- ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-
- err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE);
- if (WARN_ON(err))
- return;
-}
-
-static void __init zynq_ttc_setup_clockevent(struct device_node *np,
- void __iomem *base)
-{
- struct xttcps_timer_clockevent *ttcce;
- int err, irq;
- u32 reg;
-
- ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL);
- if (WARN_ON(!ttcce))
- return;
-
- err = of_property_read_u32(np, "reg", ®);
- if (WARN_ON(err))
- return;
-
- ttcce->xttc.base_addr = base + reg * 4;
-
- ttcce->clk = of_clk_get_by_name(np, "cpu_1x");
- if (WARN_ON(IS_ERR(ttcce->clk)))
- return;
-
- err = clk_prepare_enable(ttcce->clk);
- if (WARN_ON(err))
- return;
-
- irq = irq_of_parse_and_map(np, 0);
- if (WARN_ON(!irq))
- return;
-
- ttcce->ce.name = np->name;
- ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
- ttcce->ce.set_next_event = xttcps_set_next_event;
- ttcce->ce.set_mode = xttcps_set_mode;
- ttcce->ce.rating = 200;
- ttcce->ce.irq = irq;
- ttcce->ce.cpumask = cpu_possible_mask;
-
- __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
- __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
- ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
- __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPS_IER_OFFSET);
-
- err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER,
- np->name, ttcce);
- if (WARN_ON(err))
- return;
-
- clockevents_config_and_register(&ttcce->ce,
- clk_get_rate(ttcce->clk) / PRESCALE,
- 1, 0xfffe);
-}
-
-static const __initconst struct of_device_id zynq_ttc_match[] = {
- { .compatible = "xlnx,ttc-counter-clocksource",
- .data = zynq_ttc_setup_clocksource, },
- { .compatible = "xlnx,ttc-counter-clockevent",
- .data = zynq_ttc_setup_clockevent, },
- {}
-};
-
-/**
- * xttcps_timer_init - Initialize the timer
- *
- * Initializes the timer hardware and register the clock source and clock event
- * timers with Linux kernal timer framework
- **/
-void __init xttcps_timer_init(void)
-{
- struct device_node *np;
-
- for_each_compatible_node(np, NULL, "xlnx,ttc") {
- struct device_node *np_chld;
- void __iomem *base;
-
- base = of_iomap(np, 0);
- if (WARN_ON(!base))
- return;
-
- for_each_available_child_of_node(np, np_chld) {
- int (*cb)(struct device_node *np, void __iomem *base);
- const struct of_device_id *match;
-
- match = of_match_node(zynq_ttc_match, np_chld);
- if (match) {
- cb = match->data;
- cb(np_chld, base);
- }
- }
- }
-}
int lockregs;
int i;
- switch (cache_id) {
+ switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
case L2X0_CACHE_ID_PART_L310:
lockregs = 8;
break;
if (cache_id_part_number_from_dt)
cache_id = cache_id_part_number_from_dt;
else
- cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID)
- & L2X0_CACHE_ID_PART_MASK;
+ cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
aux &= aux_mask;
aux |= aux_val;
/* Determine the number of ways */
- switch (cache_id) {
+ switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
case L2X0_CACHE_ID_PART_L310:
if (aux & (1 << 16))
ways = 16;
.flush_all = l2x0_flush_all,
.inv_all = l2x0_inv_all,
.disable = l2x0_disable,
- .set_debug = pl310_set_debug,
},
};
data->save();
of_init = true;
- l2x0_init(l2x0_base, aux_val, aux_mask);
-
memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache));
+ l2x0_init(l2x0_base, aux_val, aux_mask);
return 0;
}
static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION);
static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS);
-static DEFINE_PER_CPU(atomic64_t, active_asids);
+DEFINE_PER_CPU(atomic64_t, active_asids);
static DEFINE_PER_CPU(u64, reserved_asids);
static cpumask_t tlb_flush_pending;
if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
local_flush_bp_all();
local_flush_tlb_all();
+ dummy_flush_tlb_a15_erratum();
}
atomic64_set(&per_cpu(active_asids, cpu), asid);
{
struct dma_pool *pool = &atomic_pool;
pgprot_t prot = pgprot_dmacoherent(pgprot_kernel);
+ gfp_t gfp = GFP_KERNEL | GFP_DMA;
unsigned long nr_pages = pool->size >> PAGE_SHIFT;
unsigned long *bitmap;
struct page *page;
ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
atomic_pool_init);
else
- ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
- &page, atomic_pool_init);
+ ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page,
+ atomic_pool_init);
if (ptr) {
int i;
} while (pte++, addr += PAGE_SIZE, addr != end);
}
-static void __init alloc_init_section(pud_t *pud, unsigned long addr,
- unsigned long end, phys_addr_t phys,
- const struct mem_type *type)
+static void __init map_init_section(pmd_t *pmd, unsigned long addr,
+ unsigned long end, phys_addr_t phys,
+ const struct mem_type *type)
{
- pmd_t *pmd = pmd_offset(pud, addr);
-
+#ifndef CONFIG_ARM_LPAE
/*
- * Try a section mapping - end, addr and phys must all be aligned
- * to a section boundary. Note that PMDs refer to the individual
- * L1 entries, whereas PGDs refer to a group of L1 entries making
- * up one logical pointer to an L2 table.
+ * In classic MMU format, puds and pmds are folded in to
+ * the pgds. pmd_offset gives the PGD entry. PGDs refer to a
+ * group of L1 entries making up one logical pointer to
+ * an L2 table (2MB), where as PMDs refer to the individual
+ * L1 entries (1MB). Hence increment to get the correct
+ * offset for odd 1MB sections.
+ * (See arch/arm/include/asm/pgtable-2level.h)
*/
- if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
- pmd_t *p = pmd;
-
-#ifndef CONFIG_ARM_LPAE
- if (addr & SECTION_SIZE)
- pmd++;
+ if (addr & SECTION_SIZE)
+ pmd++;
#endif
+ do {
+ *pmd = __pmd(phys | type->prot_sect);
+ phys += SECTION_SIZE;
+ } while (pmd++, addr += SECTION_SIZE, addr != end);
- do {
- *pmd = __pmd(phys | type->prot_sect);
- phys += SECTION_SIZE;
- } while (pmd++, addr += SECTION_SIZE, addr != end);
+ flush_pmd_entry(pmd);
+}
- flush_pmd_entry(p);
- } else {
+static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
+ unsigned long end, phys_addr_t phys,
+ const struct mem_type *type)
+{
+ pmd_t *pmd = pmd_offset(pud, addr);
+ unsigned long next;
+
+ do {
/*
- * No need to loop; pte's aren't interested in the
- * individual L1 entries.
+ * With LPAE, we must loop over to map
+ * all the pmds for the given range.
*/
- alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
- }
+ next = pmd_addr_end(addr, end);
+
+ /*
+ * Try a section mapping - addr, next and phys must all be
+ * aligned to a section boundary.
+ */
+ if (type->prot_sect &&
+ ((addr | next | phys) & ~SECTION_MASK) == 0) {
+ map_init_section(pmd, addr, next, phys, type);
+ } else {
+ alloc_init_pte(pmd, addr, next,
+ __phys_to_pfn(phys), type);
+ }
+
+ phys += next - addr;
+
+ } while (pmd++, addr = next, addr != end);
}
static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
do {
next = pud_addr_end(addr, end);
- alloc_init_section(pud, addr, next, phys, type);
+ alloc_init_pmd(pud, addr, next, phys, type);
phys += next - addr;
} while (pud++, addr = next, addr != end);
}
__v7_ca7mp_proc_info:
.long 0x410fc070
.long 0xff0ffff0
- __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+ __v7_proc __v7_ca7mp_setup
.size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
/*
__v7_ca15mp_proc_info:
.long 0x410fc0f0
.long 0xff0ffff0
- __v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV
+ __v7_proc __v7_ca15mp_setup
.size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
+ /*
+ * Qualcomm Inc. Krait processors.
+ */
+ .type __krait_proc_info, #object
+__krait_proc_info:
+ .long 0x510f0400 @ Required ID value
+ .long 0xff0ffc00 @ Mask for ID
+ /*
+ * Some Krait processors don't indicate support for SDIV and UDIV
+ * instructions in the ARM instruction set, even though they actually
+ * do support them.
+ */
+ __v7_proc __v7_setup, hwcaps = HWCAP_IDIV
+ .size __krait_proc_info, . - __krait_proc_info
+
/*
* Match any ARMv7 processor core.
*/
/* x = ((*(frame + k)) & 0xf) << 2; */
ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL;
/* the interpreter should deal with the negative K */
- if (k < 0)
+ if ((int)k < 0)
return -1;
/* offset in r1: we might have to take the slow path */
emit_mov_i(r_off, k, ctx);
*/
if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
timer->fclk = clk_get(&timer->pdev->dev, "fck");
- if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
- timer->fclk = NULL;
+ if (WARN_ON_ONCE(IS_ERR(timer->fclk))) {
dev_err(&timer->pdev->dev, ": No fclk handle.\n");
return -EINVAL;
}
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
- if (timer)
+ if (timer && !IS_ERR(timer->fclk))
return timer->fclk;
return NULL;
}
if (pdata && pdata->set_timer_src)
return pdata->set_timer_src(timer->pdev, source);
- if (!timer->fclk)
+ if (IS_ERR(timer->fclk))
return -EINVAL;
switch (source) {
}
parent = clk_get(&timer->pdev->dev, parent_name);
- if (IS_ERR_OR_NULL(parent)) {
+ if (IS_ERR(parent)) {
pr_err("%s: %s not found\n", __func__, parent_name);
return -EINVAL;
}
ret = clk_set_parent(timer->fclk, parent);
- if (IS_ERR_VALUE(ret))
+ if (ret < 0)
pr_err("%s: failed to set %s as parent\n", __func__,
parent_name);
return -ENOMEM;
}
+ timer->fclk = ERR_PTR(-ENODEV);
timer->io_base = devm_ioremap_resource(dev, mem);
if (IS_ERR(timer->io_base))
return PTR_ERR(timer->io_base);
u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
/*
- * Chip select enabled?
+ * We only take care of entries for which the chip
+ * select is enabled, and that don't have high base
+ * address bits set (devices can only access the first
+ * 32 bits of the memory).
*/
- if (size & 1) {
+ if ((size & 1) && !(base & 0xF)) {
struct mbus_dram_window *w;
w = &orion_mbus_dram_info.cs[cs++];
help
Base platform code for all Samsung SoC based systems
+config PLAT_SAMSUNG_SINGLE
+ def_bool PLAT_SAMSUNG && !ARCH_MULTIPLATFORM
+
+
config PLAT_S5P
bool
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
select PLAT_SAMSUNG
- select S3C_GPIO_TRACK
+ select S3C_GPIO_TRACK if PLAT_SAMSUNG_SINGLE
select S5P_GPIO_DRVSTR
- select SAMSUNG_CLKSRC
+ select SAMSUNG_CLKSRC if !COMMON_CLK
select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_IRQ_VIC_TIMER
help
# timer options
-config S5P_HRT
+config SAMSUNG_HRT
bool
select SAMSUNG_DEV_PWM
help
used by newer systems such as the S3C64XX.
config S5P_CLOCK
- def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+ def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
help
Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
config S3C_ADC
bool "ADC common driver support"
+ depends on PLAT_SAMSUNG_SINGLE
help
Core support for the ADC block found in the Samsung SoC systems
for drivers such as the touchscreen and hwmon to use to share
#
# Licensed under GPLv2
+ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include
+
obj-y :=
obj-m :=
obj-n := dummy.o
# Objects we always build independent of SoC choice
obj-y += init.o cpu.o
-obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
-obj-$(CONFIG_S5P_HRT) += s5p-time.o
+obj-$(CONFIG_SAMSUNG_HRT) += samsung-time.o
obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o
obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o
obj-y += platformdata.o
-obj-y += devs.o
+obj-$(CONFIG_PLAT_SAMSUNG_SINGLE) += devs.o
obj-y += dev-uart.o
obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o
obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o
obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o
# PM support
-
obj-$(CONFIG_PM) += pm.o
+ifdef CONFIG_PLAT_SAMSUNG_SINGLE
obj-$(CONFIG_PM) += pm-gpio.o
+endif
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
}
#endif /* CONFIG_PLAT_S3C24XX */
-/* MFC */
-
-#ifdef CONFIG_S5P_DEV_MFC
-static struct resource s5p_mfc_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
- [1] = DEFINE_RES_IRQ(IRQ_MFC),
-};
-
-struct platform_device s5p_device_mfc = {
- .name = "s5p-mfc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p_mfc_resource),
- .resource = s5p_mfc_resource,
-};
-
-/*
- * MFC hardware has 2 memory interfaces which are modelled as two separate
- * platform devices to let dma-mapping distinguish between them.
- *
- * MFC parent device (s5p_device_mfc) must be registered before memory
- * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
- */
-
-struct platform_device s5p_device_mfc_l = {
- .name = "s5p-mfc-l",
- .id = -1,
- .dev = {
- .parent = &s5p_device_mfc.dev,
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-struct platform_device s5p_device_mfc_r = {
- .name = "s5p-mfc-r",
- .id = -1,
- .dev = {
- .parent = &s5p_device_mfc.dev,
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-#endif /* CONFIG_S5P_DEV_MFC */
-
/* MIPI CSIS */
#ifdef CONFIG_S5P_DEV_CSIS0
/* PMU */
-#ifdef CONFIG_PLAT_S5P
+#if defined(CONFIG_PLAT_S5P) && !defined(CONFIG_ARCH_EXYNOS)
static struct resource s5p_pmu_resource[] = {
DEFINE_RES_IRQ(IRQ_PMU)
};
#define S3C24XX_CPU_ID 0x32400000
#define S3C24XX_CPU_MASK 0xFFF00000
+#define S3C2412_CPU_ID 0x32412000
+#define S3C2412_CPU_MASK 0xFFFFF000
+
#define S3C6400_CPU_ID 0x36400000
#define S3C6410_CPU_ID 0x36410000
#define S3C64XX_CPU_MASK 0xFFFFF000
}
IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
# define soc_is_s3c24xx() 0
#endif
+#if defined(CONFIG_CPU_S3C2412)
+# define soc_is_s3c2412() is_samsung_s3c2412()
+#else
+# define soc_is_s3c2412() 0
+#endif
+
#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
# define soc_is_s3c64xx() (is_samsung_s3c6400() || is_samsung_s3c6410())
#else
/* core initialisation functions */
-extern void s3c24xx_init_irq(void);
extern void s5p_init_irq(u32 *vic, u32 num_vic);
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
struct s3c24xx_uart_resources *res,
struct s3c2410_uartcfg *cfg, int no);
-/* timer for 2410/2440 */
-
-extern void s3c24xx_timer_init(void);
-
extern struct syscore_ops s3c2410_pm_syscore_ops;
extern struct syscore_ops s3c2412_pm_syscore_ops;
extern struct syscore_ops s3c2416_pm_syscore_ops;
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-/* these are exported for arch/arm/mach-* usage */
-extern struct irq_chip s3c_irq_level_chip;
-extern struct irq_chip s3c_irq_chip;
-
-static inline void s3c_irqsub_mask(unsigned int irqno,
- unsigned int parentbit,
- int subcheck)
-{
- unsigned long mask;
- unsigned long submask;
-
- submask = __raw_readl(S3C2410_INTSUBMSK);
- mask = __raw_readl(S3C2410_INTMSK);
-
- submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
- /* check to see if we need to mask the parent IRQ */
-
- if ((submask & subcheck) == subcheck)
- __raw_writel(mask | parentbit, S3C2410_INTMSK);
-
- /* write back masks */
- __raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void s3c_irqsub_unmask(unsigned int irqno,
- unsigned int parentbit)
-{
- unsigned long mask;
- unsigned long submask;
-
- submask = __raw_readl(S3C2410_INTSUBMSK);
- mask = __raw_readl(S3C2410_INTMSK);
-
- submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
- mask &= ~parentbit;
-
- /* write back masks */
- __raw_writel(submask, S3C2410_INTSUBMSK);
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void s3c_irqsub_maskack(unsigned int irqno,
- unsigned int parentmask,
- unsigned int group)
-{
- unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
- s3c_irqsub_mask(irqno, parentmask, group);
-
- __raw_writel(bit, S3C2410_SUBSRCPND);
-
- /* only ack parent if we've got all the irqs (seems we must
- * ack, all and hope that the irq system retriggers ok when
- * the interrupt goes off again)
- */
-
- if (1) {
- __raw_writel(parentmask, S3C2410_SRCPND);
- __raw_writel(parentmask, S3C2410_INTPND);
- }
-}
-
-static inline void s3c_irqsub_ack(unsigned int irqno,
- unsigned int parentmask,
- unsigned int group)
-{
- unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
- __raw_writel(bit, S3C2410_SUBSRCPND);
-
- /* only ack parent if we've got all the irqs (seems we must
- * ack, all and hope that the irq system retriggers ok when
- * the interrupt goes off again)
- */
-
- if (1) {
- __raw_writel(parentmask, S3C2410_SRCPND);
- __raw_writel(parentmask, S3C2410_INTPND);
- }
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(struct irq_data *d, unsigned int type);
*/
extern void s3c_pm_configure_extint(void);
+#ifdef CONFIG_PLAT_SAMSUNG_SINGLE
/**
* samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
*
* Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
*/
extern void samsung_pm_save_gpios(void);
+#else
+#define samsung_pm_restore_gpios() do { } while(0)
+#define samsung_pm_save_gpios() do { } while(0)
+#endif
extern void s3c_pm_save_core(void);
extern void s3c_pm_restore_core(void);
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern int s3c2410_init(void);
-extern int s3c2410a_init(void);
-
-extern void s3c2410_map_io(void);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#define s3c2410a_init NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_init(void);
-
-extern void s3c2412_map_io(void);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern int s3c2412_baseclk_add(void);
-
-extern void s3c2412_restart(char mode, const char *cmd);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#define s3c2412_restart NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
- *
- * Header file for s3c2416 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2416
-
-struct s3c2410_uartcfg;
-
-extern int s3c2416_init(void);
-
-extern void s3c2416_map_io(void);
-
-extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2416_init_clocks(int xtal);
-
-extern int s3c2416_baseclk_add(void);
-
-extern void s3c2416_restart(char mode, const char *cmd);
-
-extern void s3c2416_init_irq(void);
-extern struct syscore_ops s3c2416_irq_syscore_ops;
-
-#else
-#define s3c2416_init_clocks NULL
-#define s3c2416_init_uarts NULL
-#define s3c2416_map_io NULL
-#define s3c2416_init NULL
-#define s3c2416_restart NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2443 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2443
-
-struct s3c2410_uartcfg;
-
-extern int s3c2443_init(void);
-
-extern void s3c2443_map_io(void);
-
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2443_init_clocks(int xtal);
-
-extern int s3c2443_baseclk_add(void);
-
-extern void s3c2443_restart(char mode, const char *cmd);
-
-extern void s3c2443_init_irq(void);
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#define s3c2443_restart NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2440 and S3C2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-extern void s3c244x_map_io(void);
-
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c244x_init_clocks(int xtal);
-
-#else
-#define s3c244x_init_clocks NULL
-#define s3c244x_init_uarts NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-extern int s3c2440_init(void);
-
-extern void s3c2440_map_io(void);
-#else
-#define s3c2440_init NULL
-#define s3c2440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-extern int s3c2442_init(void);
-
-extern void s3c2442_map_io(void);
-#else
-#define s3c2442_init NULL
-#define s3c2442_map_io NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5p time support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_TIME_H
-#define __ASM_PLAT_S5P_TIME_H __FILE__
-
-/* S5P HR-Timer Clock mode */
-enum s5p_timer_mode {
- S5P_PWM0,
- S5P_PWM1,
- S5P_PWM2,
- S5P_PWM3,
- S5P_PWM4,
-};
-
-struct s5p_timer_source {
- unsigned int event_id;
- unsigned int source_id;
-};
-
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define S5PTIMER_MIN_RANGE 4
-
-#define TCNT_MAX 0xffffffff
-#define NON_PERIODIC 0
-#define PERIODIC 1
-
-extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
- enum s5p_timer_mode source);
-extern void s5p_timer_init(void);
-#endif /* __ASM_PLAT_S5P_TIME_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/samsung-time.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for samsung s3c and s5p time support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_SAMSUNG_TIME_H
+#define __ASM_PLAT_SAMSUNG_TIME_H __FILE__
+
+/* SAMSUNG HR-Timer Clock mode */
+enum samsung_timer_mode {
+ SAMSUNG_PWM0,
+ SAMSUNG_PWM1,
+ SAMSUNG_PWM2,
+ SAMSUNG_PWM3,
+ SAMSUNG_PWM4,
+};
+
+struct samsung_timer_source {
+ unsigned int event_id;
+ unsigned int source_id;
+};
+
+/* Be able to sleep for atleast 4 seconds (usually more) */
+#define SAMSUNG_TIMER_MIN_RANGE 4
+
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S5PC100)
+#define TCNT_MAX 0xffff
+#define TSCALER_DIV 25
+#define TDIV 50
+#define TSIZE 16
+#else
+#define TCNT_MAX 0xffffffff
+#define TSCALER_DIV 2
+#define TDIV 2
+#define TSIZE 32
+#endif
+
+#define NON_PERIODIC 0
+#define PERIODIC 1
+
+extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
+ enum samsung_timer_mode source);
+
+extern void __init samsung_timer_init(void);
+
+#endif /* __ASM_PLAT_SAMSUNG_TIME_H */
#ifndef __PLAT_S3C_SDHCI_H
#define __PLAT_S3C_SDHCI_H __FILE__
+#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <plat/devs.h>
-struct platform_device;
-struct mmc_host;
-struct mmc_card;
-struct mmc_ios;
-
-enum cd_types {
- S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
- S3C_SDHCI_CD_EXTERNAL, /* use external callback */
- S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
- S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
- S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
-};
-
-/**
- * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
- * @max_width: The maximum number of data bits supported.
- * @host_caps: Standard MMC host capabilities bit field.
- * @host_caps2: The second standard MMC host capabilities bit field.
- * @cd_type: Type of Card Detection method (see cd_types enum above)
- * @ext_cd_init: Initialize external card detect subsystem. Called on
- * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
- * notify_func argument is a callback to the sdhci-s3c driver
- * that triggers the card detection event. Callback arguments:
- * dev is pointer to platform device of the host controller,
- * state is new state of the card (0 - removed, 1 - inserted).
- * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
- * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
- * notify_func argument is the same callback as for ext_cd_init.
- * @ext_cd_gpio: gpio pin used for external CD line, valid only if
- * cd_type == S3C_SDHCI_CD_GPIO
- * @ext_cd_gpio_invert: invert values for external CD gpio line
- * @cfg_gpio: Configure the GPIO for a specific card bit-width
- *
- * Initialisation data specific to either the machine or the platform
- * for the device driver to use or call-back when configuring gpio or
- * card speed information.
-*/
-struct s3c_sdhci_platdata {
- unsigned int max_width;
- unsigned int host_caps;
- unsigned int host_caps2;
- unsigned int pm_caps;
- enum cd_types cd_type;
-
- int ext_cd_gpio;
- bool ext_cd_gpio_invert;
- int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
- int state));
- int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
- int state));
-
- void (*cfg_gpio)(struct platform_device *dev, int width);
-};
-
/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
* @pd: The default platform data for this device.
* @set: Pointer to the platform data to fill in.
break;
}
}
-
#endif /* __PLAT_S3C_SDHCI_H */
#include <linux/io.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <plat/cpu.h>
#include <plat/irq-vic-timer.h>
#include <plat/regs-timer.h>
#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-irq.h>
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <plat/pm.h>
#include <linux/of.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <plat/devs.h>
-#include <plat/irqs.h>
#include <plat/mfc.h>
+static struct resource s5p_mfc_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
+ [1] = DEFINE_RES_IRQ(IRQ_MFC),
+};
+
+struct platform_device s5p_device_mfc = {
+ .name = "s5p-mfc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_mfc_resource),
+ .resource = s5p_mfc_resource,
+};
+
+/*
+ * MFC hardware has 2 memory interfaces which are modelled as two separate
+ * platform devices to let dma-mapping distinguish between them.
+ *
+ * MFC parent device (s5p_device_mfc) must be registered before memory
+ * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
+ */
+
+struct platform_device s5p_device_mfc_l = {
+ .name = "s5p-mfc-l",
+ .id = -1,
+ .dev = {
+ .parent = &s5p_device_mfc.dev,
+ .dma_mask = &s5p_device_mfc_l.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device s5p_device_mfc_r = {
+ .name = "s5p-mfc-r",
+ .id = -1,
+ .dev = {
+ .parent = &s5p_device_mfc.dev,
+ .dma_mask = &s5p_device_mfc_r.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
struct s5p_mfc_reserved_mem {
phys_addr_t base;
unsigned long size;
#include <linux/io.h>
#include <linux/irqchip/arm-vic.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <plat/regs-timer.h>
#include <plat/cpu.h>
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
- * S5P - Common hr-timer support
+ * samsung - Common hr-timer support (s3c and s5p)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <mach/map.h>
#include <plat/devs.h>
#include <plat/regs-timer.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
static struct clk *tin_event;
static struct clk *tin_source;
static struct clk *tdiv_event;
static struct clk *tdiv_source;
static struct clk *timerclk;
-static struct s5p_timer_source timer_source;
+static struct samsung_timer_source timer_source;
static unsigned long clock_count_per_tick;
-static void s5p_timer_resume(void);
+static void samsung_timer_resume(void);
-static void s5p_time_stop(enum s5p_timer_mode mode)
+static void samsung_time_stop(enum samsung_timer_mode mode)
{
unsigned long tcon;
tcon = __raw_readl(S3C2410_TCON);
switch (mode) {
- case S5P_PWM0:
+ case SAMSUNG_PWM0:
tcon &= ~S3C2410_TCON_T0START;
break;
- case S5P_PWM1:
+ case SAMSUNG_PWM1:
tcon &= ~S3C2410_TCON_T1START;
break;
- case S5P_PWM2:
+ case SAMSUNG_PWM2:
tcon &= ~S3C2410_TCON_T2START;
break;
- case S5P_PWM3:
+ case SAMSUNG_PWM3:
tcon &= ~S3C2410_TCON_T3START;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
tcon &= ~S3C2410_TCON_T4START;
break;
__raw_writel(tcon, S3C2410_TCON);
}
-static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt)
+static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt)
{
unsigned long tcon;
tcnt--;
switch (mode) {
- case S5P_PWM0:
+ case SAMSUNG_PWM0:
tcon &= ~(0x0f << 0);
tcon |= S3C2410_TCON_T0MANUALUPD;
break;
- case S5P_PWM1:
+ case SAMSUNG_PWM1:
tcon &= ~(0x0f << 8);
tcon |= S3C2410_TCON_T1MANUALUPD;
break;
- case S5P_PWM2:
+ case SAMSUNG_PWM2:
tcon &= ~(0x0f << 12);
tcon |= S3C2410_TCON_T2MANUALUPD;
break;
- case S5P_PWM3:
+ case SAMSUNG_PWM3:
tcon &= ~(0x0f << 16);
tcon |= S3C2410_TCON_T3MANUALUPD;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
tcon &= ~(0x07 << 20);
tcon |= S3C2410_TCON_T4MANUALUPD;
break;
__raw_writel(tcon, S3C2410_TCON);
}
-static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
+static void samsung_time_start(enum samsung_timer_mode mode, bool periodic)
{
unsigned long tcon;
tcon = __raw_readl(S3C2410_TCON);
switch (mode) {
- case S5P_PWM0:
+ case SAMSUNG_PWM0:
tcon |= S3C2410_TCON_T0START;
tcon &= ~S3C2410_TCON_T0MANUALUPD;
tcon &= ~S3C2410_TCON_T0RELOAD;
break;
- case S5P_PWM1:
+ case SAMSUNG_PWM1:
tcon |= S3C2410_TCON_T1START;
tcon &= ~S3C2410_TCON_T1MANUALUPD;
tcon &= ~S3C2410_TCON_T1RELOAD;
break;
- case S5P_PWM2:
+ case SAMSUNG_PWM2:
tcon |= S3C2410_TCON_T2START;
tcon &= ~S3C2410_TCON_T2MANUALUPD;
tcon &= ~S3C2410_TCON_T2RELOAD;
break;
- case S5P_PWM3:
+ case SAMSUNG_PWM3:
tcon |= S3C2410_TCON_T3START;
tcon &= ~S3C2410_TCON_T3MANUALUPD;
tcon &= ~S3C2410_TCON_T3RELOAD;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
tcon |= S3C2410_TCON_T4START;
tcon &= ~S3C2410_TCON_T4MANUALUPD;
__raw_writel(tcon, S3C2410_TCON);
}
-static int s5p_set_next_event(unsigned long cycles,
+static int samsung_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- s5p_time_setup(timer_source.event_id, cycles);
- s5p_time_start(timer_source.event_id, NON_PERIODIC);
+ samsung_time_setup(timer_source.event_id, cycles);
+ samsung_time_start(timer_source.event_id, NON_PERIODIC);
return 0;
}
-static void s5p_set_mode(enum clock_event_mode mode,
+static void samsung_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- s5p_time_stop(timer_source.event_id);
+ samsung_time_stop(timer_source.event_id);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- s5p_time_setup(timer_source.event_id, clock_count_per_tick);
- s5p_time_start(timer_source.event_id, PERIODIC);
+ samsung_time_setup(timer_source.event_id, clock_count_per_tick);
+ samsung_time_start(timer_source.event_id, PERIODIC);
break;
case CLOCK_EVT_MODE_ONESHOT:
break;
case CLOCK_EVT_MODE_RESUME:
- s5p_timer_resume();
+ samsung_timer_resume();
break;
}
}
-static void s5p_timer_resume(void)
+static void samsung_timer_resume(void)
{
/* event timer restart */
- s5p_time_setup(timer_source.event_id, clock_count_per_tick);
- s5p_time_start(timer_source.event_id, PERIODIC);
+ samsung_time_setup(timer_source.event_id, clock_count_per_tick);
+ samsung_time_start(timer_source.event_id, PERIODIC);
/* source timer restart */
- s5p_time_setup(timer_source.source_id, TCNT_MAX);
- s5p_time_start(timer_source.source_id, PERIODIC);
+ samsung_time_setup(timer_source.source_id, TCNT_MAX);
+ samsung_time_start(timer_source.source_id, PERIODIC);
}
-void __init s5p_set_timer_source(enum s5p_timer_mode event,
- enum s5p_timer_mode source)
+void __init samsung_set_timer_source(enum samsung_timer_mode event,
+ enum samsung_timer_mode source)
{
s3c_device_timer[event].dev.bus = &platform_bus_type;
s3c_device_timer[source].dev.bus = &platform_bus_type;
}
static struct clock_event_device time_event_device = {
- .name = "s5p_event_timer",
+ .name = "samsung_event_timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.rating = 200,
- .set_next_event = s5p_set_next_event,
- .set_mode = s5p_set_mode,
+ .set_next_event = samsung_set_next_event,
+ .set_mode = samsung_set_mode,
};
-static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id)
+static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
return IRQ_HANDLED;
}
-static struct irqaction s5p_clock_event_irq = {
- .name = "s5p_time_irq",
+static struct irqaction samsung_clock_event_irq = {
+ .name = "samsung_time_irq",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = s5p_clock_event_isr,
+ .handler = samsung_clock_event_isr,
.dev_id = &time_event_device,
};
-static void __init s5p_clockevent_init(void)
+static void __init samsung_clockevent_init(void)
{
unsigned long pclk;
unsigned long clock_rate;
tscaler = clk_get_parent(tdiv_event);
- clk_set_rate(tscaler, pclk / 2);
- clk_set_rate(tdiv_event, pclk / 2);
+ clk_set_rate(tscaler, pclk / TSCALER_DIV);
+ clk_set_rate(tdiv_event, pclk / TDIV);
clk_set_parent(tin_event, tdiv_event);
clock_rate = clk_get_rate(tin_event);
clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
irq_number = timer_source.event_id + IRQ_TIMER0;
- setup_irq(irq_number, &s5p_clock_event_irq);
+ setup_irq(irq_number, &samsung_clock_event_irq);
}
-static void __iomem *s5p_timer_reg(void)
+static void __iomem *samsung_timer_reg(void)
{
unsigned long offset = 0;
switch (timer_source.source_id) {
- case S5P_PWM0:
- case S5P_PWM1:
- case S5P_PWM2:
- case S5P_PWM3:
+ case SAMSUNG_PWM0:
+ case SAMSUNG_PWM1:
+ case SAMSUNG_PWM2:
+ case SAMSUNG_PWM3:
offset = (timer_source.source_id * 0x0c) + 0x14;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
offset = 0x40;
break;
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by U300 implementation.)
*/
-static u32 notrace s5p_read_sched_clock(void)
+static u32 notrace samsung_read_sched_clock(void)
{
- void __iomem *reg = s5p_timer_reg();
+ void __iomem *reg = samsung_timer_reg();
if (!reg)
return 0;
return ~__raw_readl(reg);
}
-static void __init s5p_clocksource_init(void)
+static void __init samsung_clocksource_init(void)
{
unsigned long pclk;
unsigned long clock_rate;
pclk = clk_get_rate(timerclk);
- clk_set_rate(tdiv_source, pclk / 2);
+ clk_set_rate(tdiv_source, pclk / TDIV);
clk_set_parent(tin_source, tdiv_source);
clock_rate = clk_get_rate(tin_source);
- s5p_time_setup(timer_source.source_id, TCNT_MAX);
- s5p_time_start(timer_source.source_id, PERIODIC);
+ samsung_time_setup(timer_source.source_id, TCNT_MAX);
+ samsung_time_start(timer_source.source_id, PERIODIC);
- setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
+ setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
- if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
- clock_rate, 250, 32, clocksource_mmio_readl_down))
- panic("s5p_clocksource_timer: can't register clocksource\n");
+ if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
+ clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
+ panic("samsung_clocksource_timer: can't register clocksource\n");
}
-static void __init s5p_timer_resources(void)
+static void __init samsung_timer_resources(void)
{
unsigned long event_id = timer_source.event_id;
clk_enable(tin_source);
}
-void __init s5p_timer_init(void)
+void __init samsung_timer_init(void)
{
- s5p_timer_resources();
- s5p_clockevent_init();
- s5p_clocksource_init();
+ samsung_timer_resources();
+ samsung_clockevent_init();
+ samsung_clocksource_init();
}
+++ /dev/null
-/* linux/arch/arm/plat-samsung/time.c
- *
- * Copyright (C) 2003-2005 Simtec Electronics
- * Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/irq.h>
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <mach/regs-irq.h>
-#include <asm/mach/time.h>
-#include <mach/tick.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static unsigned long timer_startval;
-static unsigned long timer_usec_ticks;
-
-#ifndef TICK_MAX
-#define TICK_MAX (0xffff)
-#endif
-
-#define TIMER_USEC_SHIFT 16
-
-/* we use the shifted arithmetic to work out the ratio of timer ticks
- * to usecs, as often the peripheral clock is not a nice even multiple
- * of 1MHz.
- *
- * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
- * for the current HZ value of 200 without producing overflows.
- *
- * Original patch by Dimitry Andric, updated by Ben Dooks
-*/
-
-
-/* timer_mask_usec_ticks
- *
- * given a clock and divisor, make the value to pass into timer_ticks_to_usec
- * to scale the ticks into usecs
-*/
-
-static inline unsigned long
-timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
-{
- unsigned long den = pclk / 1000;
-
- return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
-}
-
-/* timer_ticks_to_usec
- *
- * convert timer ticks to usec.
-*/
-
-static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
-{
- unsigned long res;
-
- res = ticks * timer_usec_ticks;
- res += 1 << (TIMER_USEC_SHIFT - 4); /* round up slightly */
-
- return res >> TIMER_USEC_SHIFT;
-}
-
-/***
- * Returns microsecond since last clock interrupt. Note that interrupts
- * will have been disabled by do_gettimeoffset()
- * IRQs are disabled before entering here from do_gettimeofday()
- */
-
-static u32 s3c2410_gettimeoffset(void)
-{
- unsigned long tdone;
- unsigned long tval;
-
- /* work out how many ticks have gone since last timer interrupt */
-
- tval = __raw_readl(S3C2410_TCNTO(4));
- tdone = timer_startval - tval;
-
- /* check to see if there is an interrupt pending */
-
- if (s3c24xx_ostimer_pending()) {
- /* re-read the timer, and try and fix up for the missed
- * interrupt. Note, the interrupt may go off before the
- * timer has re-loaded from wrapping.
- */
-
- tval = __raw_readl(S3C2410_TCNTO(4));
- tdone = timer_startval - tval;
-
- if (tval != 0)
- tdone += timer_startval;
- }
-
- return timer_ticks_to_usec(tdone) * 1000;
-}
-
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-s3c2410_timer_interrupt(int irq, void *dev_id)
-{
- timer_tick();
- return IRQ_HANDLED;
-}
-
-static struct irqaction s3c2410_timer_irq = {
- .name = "S3C2410 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = s3c2410_timer_interrupt,
-};
-
-#define use_tclk1_12() ( \
- machine_is_bast() || \
- machine_is_vr1000() || \
- machine_is_anubis() || \
- machine_is_osiris())
-
-static struct clk *tin;
-static struct clk *tdiv;
-static struct clk *timerclk;
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- *
- * Currently we only use timer4, as it is the only timer which has no
- * other function that can be exploited externally
- */
-static void s3c2410_timer_setup (void)
-{
- unsigned long tcon;
- unsigned long tcnt;
- unsigned long tcfg1;
- unsigned long tcfg0;
-
- tcnt = TICK_MAX; /* default value for tcnt */
-
- /* configure the system for whichever machine is in use */
-
- if (use_tclk1_12()) {
- /* timer is at 12MHz, scaler is 1 */
- timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
- tcnt = 12000000 / HZ;
-
- tcfg1 = __raw_readl(S3C2410_TCFG1);
- tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
- tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
- __raw_writel(tcfg1, S3C2410_TCFG1);
- } else {
- unsigned long pclk;
- struct clk *tscaler;
-
- /* for the h1940 (and others), we use the pclk from the core
- * to generate the timer values. since values around 50 to
- * 70MHz are not values we can directly generate the timer
- * value from, we need to pre-scale and divide before using it.
- *
- * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
- * (8.45 ticks per usec)
- */
-
- pclk = clk_get_rate(timerclk);
-
- /* configure clock tick */
-
- timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
-
- tscaler = clk_get_parent(tdiv);
-
- clk_set_rate(tscaler, pclk / 3);
- clk_set_rate(tdiv, pclk / 6);
- clk_set_parent(tin, tdiv);
-
- tcnt = clk_get_rate(tin) / HZ;
- }
-
- tcon = __raw_readl(S3C2410_TCON);
- tcfg0 = __raw_readl(S3C2410_TCFG0);
- tcfg1 = __raw_readl(S3C2410_TCFG1);
-
- /* timers reload after counting zero, so reduce the count by 1 */
-
- tcnt--;
-
- printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
- tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
-
- /* check to see if timer is within 16bit range... */
- if (tcnt > TICK_MAX) {
- panic("setup_timer: HZ is too small, cannot configure timer!");
- return;
- }
-
- __raw_writel(tcfg1, S3C2410_TCFG1);
- __raw_writel(tcfg0, S3C2410_TCFG0);
-
- timer_startval = tcnt;
- __raw_writel(tcnt, S3C2410_TCNTB(4));
-
- /* ensure timer is stopped... */
-
- tcon &= ~(7<<20);
- tcon |= S3C2410_TCON_T4RELOAD;
- tcon |= S3C2410_TCON_T4MANUALUPD;
-
- __raw_writel(tcon, S3C2410_TCON);
- __raw_writel(tcnt, S3C2410_TCNTB(4));
- __raw_writel(tcnt, S3C2410_TCMPB(4));
-
- /* start the timer running */
- tcon |= S3C2410_TCON_T4START;
- tcon &= ~S3C2410_TCON_T4MANUALUPD;
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void __init s3c2410_timer_resources(void)
-{
- struct platform_device tmpdev;
-
- tmpdev.dev.bus = &platform_bus_type;
- tmpdev.id = 4;
-
- timerclk = clk_get(NULL, "timers");
- if (IS_ERR(timerclk))
- panic("failed to get clock for system timer");
-
- clk_enable(timerclk);
-
- if (!use_tclk1_12()) {
- tmpdev.id = 4;
- tmpdev.dev.init_name = "s3c24xx-pwm.4";
- tin = clk_get(&tmpdev.dev, "pwm-tin");
- if (IS_ERR(tin))
- panic("failed to get pwm-tin clock for system timer");
-
- tdiv = clk_get(&tmpdev.dev, "pwm-tdiv");
- if (IS_ERR(tdiv))
- panic("failed to get pwm-tdiv clock for system timer");
- }
-
- clk_enable(tin);
-}
-
-static struct syscore_ops s3c24xx_syscore_ops = {
- .resume = s3c2410_timer_setup,
-};
-
-void __init s3c24xx_timer_init(void)
-{
- arch_gettimeoffset = s3c2410_gettimeoffset;
-
- s3c2410_timer_resources();
- s3c2410_timer_setup();
- setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
- register_syscore_ops(&s3c24xx_syscore_ops);
-}
config ARCH_SPEAR13XX
bool "ST SPEAr13xx with Device Tree"
- select ARCH_HAVE_CPUFREQ
+ select ARCH_HAS_CPUFREQ
select ARM_GIC
select CPU_V7
select GPIO_SPEAR_SPICS
select CLONE_BACKWARDS
select COMMON_CLK
select GENERIC_CLOCKEVENTS
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IOMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
bool
default y
-config DEBUG_ERRORS
- bool "Verbose kernel error messages"
- depends on DEBUG_KERNEL
- help
- This option controls verbose debugging information which can be
- printed when the kernel detects an internal error. This debugging
- information is useful to kernel hackers when tracking down problems,
- but mostly meaningless to other people. It's safe to say Y unless
- you are concerned with the code size or don't want to see these
- messages.
-
config DEBUG_STACK_USAGE
bool "Enable stack utilization instrumentation"
depends on DEBUG_KERNEL
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_DEBUG_ERRORS=y
stack_t uc_stack;
sigset_t uc_sigmask;
/* glibc uses a 1024-bit sigset_t */
- __u8 __unused[(1024 - sizeof(sigset_t)) / 8];
+ __u8 __unused[1024 / 8 - sizeof(sigset_t)];
/* last for future expansion */
struct sigcontext uc_mcontext;
};
EXPORT_SYMBOL(__clear_user);
/* bitops */
+#ifdef CONFIG_SMP
EXPORT_SYMBOL(__atomic_hash);
+#endif
/* physical memory */
EXPORT_SYMBOL(memstart_addr);
sigset_t *set, struct pt_regs *regs)
{
struct compat_rt_sigframe __user *frame;
- compat_stack_t stack;
int err = 0;
frame = compat_get_sigframe(ka, regs, sizeof(*frame));
void __iomem * __init early_io_map(phys_addr_t phys, unsigned long virt)
{
unsigned long size, mask;
- bool page64k = IS_ENABLED(ARM64_64K_PAGES);
+ bool page64k = IS_ENABLED(CONFIG_ARM64_64K_PAGES);
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_ATOMIC64
select HARDIRQS_SW_RESEND
},
};
DEFINE_DEV_DATA(atmel_lcdfb, 0);
-DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
+DEV_CLK(hclk, atmel_lcdfb0, hsb, 7);
static struct clk atmel_lcdfb0_pixclk = {
.name = "lcdc_clk",
.dev = &atmel_lcdfb0_device.dev,
memcpy(info, data, sizeof(struct atmel_lcdfb_info));
info->default_monspecs = monspecs;
+ pdev->name = "at32ap-lcdfb";
+
platform_device_register(pdev);
return pdev;
&atmel_twi0_pclk,
&atmel_mci0_pclk,
#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
- &atmel_lcdfb0_hck1,
+ &atmel_lcdfb0_hclk,
&atmel_lcdfb0_pixclk,
#endif
&ssc0_pclk,
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
select GENERIC_ATOMIC64
select HAVE_GENERIC_HARDIRQS
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_IOMAP
select HAVE_PERF_EVENTS
select HAVE_UID16
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select HAVE_DEBUG_BUGVERBOSE
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_VIRT_CPU_ACCOUNTING
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_DISCARD_MEMBLOCK
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
}
if (!need_resched()) {
- void (*idle)(void);
#ifdef CONFIG_SMP
min_xtp();
#endif
if (mark_idle)
(*mark_idle)(1);
- if (!idle)
- idle = default_idle;
- (*idle)();
+ default_idle();
if (mark_idle)
(*mark_idle)(0);
#ifdef CONFIG_SMP
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_DEBUG_BUGVERBOSE
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_ATOMIC64
long long st_size;
unsigned long st_blksize;
-#if defined(__BIG_ENDIAN)
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
unsigned long __pad4; /* future possible st_blocks high bits */
unsigned long st_blocks; /* Number 512-byte blocks allocated. */
-#elif defined(__LITTLE_ENDIAN)
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
unsigned long st_blocks; /* Number 512-byte blocks allocated. */
unsigned long __pad4; /* future possible st_blocks high bits */
#else
select GENERIC_IRQ_SHOW
select GENERIC_ATOMIC64
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
select GENERIC_CPU_DEVICES
select GENERIC_STRNCPY_FROM_USER if MMU
config SOM5282EM
bool "EMAC.Inc SOM5282EM board support"
depends on M528x
- select EMAC_INC
help
Support for the EMAC.Inc SOM5282EM module.
/*
* Here go the bitmasks themselves
*/
-#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */
+#define IMR_MSPIM (1 << SPIM_IRQ_NUM) /* Mask SPI Master interrupt */
#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */
#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
#define IWR_ADDR 0xfffff308
#define IWR LONG_REF(IWR_ADDR)
-#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define IWR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
#define ISR_ADDR 0xfffff30c
#define ISR LONG_REF(ISR_ADDR)
-#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define ISR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
#define IPR_ADDR 0xfffff310
#define IPR LONG_REF(IPR_ADDR)
-#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define IPR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
/* 'EZ328-compatible definitions */
#define TCN_ADDR TCN1_ADDR
-#define TCN TCN
+#define TCN TCN1
/*
* Timer Unit 1 and 2 Status Registers
void (*mach_halt)(void);
void (*mach_power_off)(void);
+#ifdef CONFIG_M68000
+#define CPU_NAME "MC68000"
+#endif
#ifdef CONFIG_M68328
#define CPU_NAME "MC68328"
#endif
}
}
-#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+#if defined(CONFIG_MMU) && !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
/* insert pointer tables allocated so far into the tablelist */
init_pointer_table((unsigned long)kernel_pg_dir);
for (i = 0; i < PTRS_PER_PGD; i++) {
u8 port;
/* make sure PUAPAR is set for UART0 and UART1 */
- port = readb(MCF5282_GPIO_PUAPAR);
+ port = readb(MCFGPIO_PUAPAR);
port |= 0x03 | (0x03 << 2);
writeb(port, MCFGPIO_PUAPAR);
}
select HAVE_DEBUG_KMEMLEAK
select IRQ_DOMAIN
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select HAVE_KRETPROBES
select HAVE_DEBUG_KMEMLEAK
select ARCH_BINFMT_ELF_RANDOMIZE_PIE
- select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+ select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
select RTC_LIB if !MACH_LOONGSON
select GENERIC_ATOMIC64 if !64BIT
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE
select HAVE_MOD_ARCH_SPECIFIC
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select MODULES_USE_ELF_REL if MODULES
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select CLONE_BACKWARDS
bool "SNI RM200/300/400"
select FW_ARC if CPU_LITTLE_ENDIAN
select FW_ARC32 if CPU_LITTLE_ENDIAN
- select SNIPROM if CPU_BIG_ENDIAN
+ select FW_SNIPROM if CPU_BIG_ENDIAN
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select CEVT_R4K
config FW_ARC32
bool
-config SNIPROM
+config FW_SNIPROM
bool
config BOOT_ELF32
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
- select CPU_HAS_LLSC
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select CPU_HAS_PREFETCH
strcpy(cfe_version, "unknown");
printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
- if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET)) {
- printk(KERN_ERR PFX "invalid nvram checksum\n");
- return;
- }
+ bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
board_name = bcm63xx_nvram_get_name();
/* find board by name */
static struct bcm963xx_nvram nvram;
static int mac_addr_used;
-int __init bcm63xx_nvram_init(void *addr)
+void __init bcm63xx_nvram_init(void *addr)
{
unsigned int check_len;
u32 crc, expected_crc;
crc = crc32_le(~0, (u8 *)&nvram, check_len);
if (crc != expected_crc)
- return -EINVAL;
-
- return 0;
+ pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
+ expected_crc, crc);
}
u8 *bcm63xx_nvram_get_name(void)
return board_register_devices();
}
-device_initcall(bcm63xx_register_devices);
+arch_initcall(bcm63xx_register_devices);
static void octeon_generic_shutdown(void)
{
- int cpu, i;
+ int i;
+#ifdef CONFIG_SMP
+ int cpu;
+#endif
struct cvmx_bootmem_desc *bootmem_desc;
void *named_block_array_ptr;
*
* Initialized the local nvram copy from the target address and checks
* its checksum.
- *
- * Returns 0 on success.
*/
-int __init bcm63xx_nvram_init(void *nvram);
+void bcm63xx_nvram_init(void *nvram);
/**
* bcm63xx_nvram_get_name() - returns the board name according to nvram
/* #define cpu_has_prefetch ? */
#define cpu_has_mcheck 1
/* #define cpu_has_ejtag ? */
-#ifdef CONFIG_CPU_HAS_LLSC
#define cpu_has_llsc 1
-#else
-#define cpu_has_llsc 0
-#endif
/* #define cpu_has_vtag_icache ? */
/* #define cpu_has_dc_aliases ? */
/* #define cpu_has_ic_fills_f_dc ? */
unsigned int __dspctl; \
\
__asm__ __volatile__( \
+ " .set push \n" \
+ " .set dsp \n" \
" rddsp %0, %x1 \n" \
+ " .set pop \n" \
: "=r" (__dspctl) \
: "i" (mask)); \
__dspctl; \
#define wrdsp(val, mask) \
do { \
__asm__ __volatile__( \
+ " .set push \n" \
+ " .set dsp \n" \
" wrdsp %0, %x1 \n" \
+ " .set pop \n" \
: \
: "r" (val), "i" (mask)); \
} while (0)
-#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
-#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
-#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
-#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
-
-#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
-#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
-#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
-#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
-
-#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
-#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
-#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
-#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
-
-#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
-#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
-#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
-#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+#define mflo0() \
+({ \
+ long mflo0; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mflo %0, $ac0 \n" \
+ " .set pop \n" \
+ : "=r" (mflo0)); \
+ mflo0; \
+})
+
+#define mflo1() \
+({ \
+ long mflo1; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mflo %0, $ac1 \n" \
+ " .set pop \n" \
+ : "=r" (mflo1)); \
+ mflo1; \
+})
+
+#define mflo2() \
+({ \
+ long mflo2; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mflo %0, $ac2 \n" \
+ " .set pop \n" \
+ : "=r" (mflo2)); \
+ mflo2; \
+})
+
+#define mflo3() \
+({ \
+ long mflo3; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mflo %0, $ac3 \n" \
+ " .set pop \n" \
+ : "=r" (mflo3)); \
+ mflo3; \
+})
+
+#define mfhi0() \
+({ \
+ long mfhi0; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mfhi %0, $ac0 \n" \
+ " .set pop \n" \
+ : "=r" (mfhi0)); \
+ mfhi0; \
+})
+
+#define mfhi1() \
+({ \
+ long mfhi1; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mfhi %0, $ac1 \n" \
+ " .set pop \n" \
+ : "=r" (mfhi1)); \
+ mfhi1; \
+})
+
+#define mfhi2() \
+({ \
+ long mfhi2; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mfhi %0, $ac2 \n" \
+ " .set pop \n" \
+ : "=r" (mfhi2)); \
+ mfhi2; \
+})
+
+#define mfhi3() \
+({ \
+ long mfhi3; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mfhi %0, $ac3 \n" \
+ " .set pop \n" \
+ : "=r" (mfhi3)); \
+ mfhi3; \
+})
+
+
+#define mtlo0(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mtlo %0, $ac0 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mtlo1(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mtlo %0, $ac1 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mtlo2(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mtlo %0, $ac2 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mtlo3(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mtlo %0, $ac3 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mthi0(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mthi %0, $ac0 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mthi1(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mthi %0, $ac1 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mthi2(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mthi %0, $ac2 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mthi3(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mthi %0, $ac3 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
#else
#include <asm/sigcontext.h>
#include <asm/siginfo.h>
-#define __ARCH_HAS_ODD_SIGACTION
+#define __ARCH_HAS_IRIX_SIGACTION
#endif /* _ASM_SIGNAL_H */
*
* SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
* Unix names RESETHAND and NODEFER respectively.
+ *
+ * SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever
+ * supported its use and no libc was using it, so the entire sa-restorer
+ * functionality was removed with lmo commit 39bffc12c3580ab for 2.5.48
+ * retaining only the SA_RESTORER definition as a reminder to avoid
+ * accidental reuse of the mask bit.
*/
#define SA_ONSTACK 0x08000000
#define SA_RESETHAND 0x80000000
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_RESTORER 0x04000000 /* Only for o32 */
-
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
#
-# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe
-# to enable DSP assembler support here even if the MIPS Release 2 CPU we
-# are targetting does not support DSP because all code-paths making use of
-# it properly check that the running CPU *actually does* support these
-# instructions.
+# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not
+# safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches
+# here because the compiler may use DSP ASE instructions (such as lwx) in
+# code paths where we cannot check that the CPU we are running on supports it.
+# Proper abstraction using HAVE_AS_DSP and macros is done in
+# arch/mips/include/asm/mipsregs.h.
#
ifeq ($(CONFIG_CPU_MIPSR2), y)
CFLAGS_DSP = -DHAVE_AS_DSP
-#
-# Check if assembler supports DSP ASE
-#
-ifeq ($(call cc-option-yn,-mdsp), y)
-CFLAGS_DSP += -mdsp
-endif
-
-#
-# Check if assembler supports DSP ASE Rev2
-#
-ifeq ($(call cc-option-yn,-mdspr2), y)
-CFLAGS_DSP += -mdspr2
-endif
-
CFLAGS_signal.o = $(CFLAGS_DSP)
CFLAGS_signal32.o = $(CFLAGS_DSP)
CFLAGS_process.o = $(CFLAGS_DSP)
c->tlbsize = 48;
break;
case PRID_IMP_VR41XX:
+ set_isa(c, MIPS_CPU_ISA_III);
+ c->options = R4K_OPTS;
+ c->tlbsize = 32;
switch (c->processor_id & 0xf0) {
case PRID_REV_VR4111:
c->cputype = CPU_VR4111;
__cpu_name[cpu] = "NEC VR4131";
} else {
c->cputype = CPU_VR4133;
+ c->options |= MIPS_CPU_LLSC;
__cpu_name[cpu] = "NEC VR4133";
}
break;
__cpu_name[cpu] = "NEC Vr41xx";
break;
}
- set_isa(c, MIPS_CPU_ISA_III);
- c->options = R4K_OPTS;
- c->tlbsize = 32;
break;
case PRID_IMP_R4300:
c->cputype = CPU_R4300;
if (c->options & MIPS_CPU_FPU) {
c->fpu_id = cpu_get_fpu_id();
- if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
- c->isa_level == MIPS_CPU_ISA_M32R2 ||
- c->isa_level == MIPS_CPU_ISA_M64R1 ||
- c->isa_level == MIPS_CPU_ISA_M64R2) {
+ if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
+ MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) {
if (c->fpu_id & MIPS_FPIR_3D)
c->ases |= MIPS_ASE_MIPS3D;
}
err = compat_sys_shmctl(first, second, compat_ptr(ptr));
break;
default:
- err = -EINVAL;
+ err = -ENOSYS;
break;
}
PTR_L a5, PT_R9(sp)
PTR_L a6, PT_R10(sp)
PTR_L a7, PT_R11(sp)
-#else
- PTR_ADDIU sp, PT_SIZE
#endif
-.endm
+ PTR_ADDIU sp, PT_SIZE
+ .endm
.macro RETURN_BACK
jr ra
.globl _mcount
_mcount:
b ftrace_stub
- addiu sp,sp,8
+#ifdef CONFIG_32BIT
+ addiu sp,sp,8
+#else
+ nop
+#endif
/* When tracing is activated, it calls ftrace_caller+8 (aka here) */
lw t1, function_trace_stop
if (cpu_has_mips_r) {
seq_printf(m, "isa\t\t\t:");
if (cpu_has_mips_1)
- seq_printf(m, "%s", "mips1");
+ seq_printf(m, "%s", " mips1");
if (cpu_has_mips_2)
seq_printf(m, "%s", " mips2");
if (cpu_has_mips_3)
#ifdef CONFIG_64BIT
status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX;
#endif
- if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
+ if (current_cpu_data.isa_level & MIPS_CPU_ISA_IV)
status_set |= ST0_XX;
if (cpu_has_dsp)
status_set |= ST0_MX;
unsigned bit = nr & SZLONG_MASK;
unsigned long mask;
unsigned long flags;
- unsigned long res;
+ int res;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- res = (mask & *a);
+ res = (mask & *a) != 0;
*a |= mask;
raw_local_irq_restore(flags);
return res;
unsigned bit = nr & SZLONG_MASK;
unsigned long mask;
unsigned long flags;
- unsigned long res;
+ int res;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- res = (mask & *a);
+ res = (mask & *a) != 0;
*a |= mask;
raw_local_irq_restore(flags);
return res;
unsigned bit = nr & SZLONG_MASK;
unsigned long mask;
unsigned long flags;
- unsigned long res;
+ int res;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- res = (mask & *a);
+ res = (mask & *a) != 0;
*a &= ~mask;
raw_local_irq_restore(flags);
return res;
unsigned bit = nr & SZLONG_MASK;
unsigned long mask;
unsigned long flags;
- unsigned long res;
+ int res;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- res = (mask & *a);
+ res = (mask & *a) != 0;
*a ^= mask;
raw_local_irq_restore(flags);
return res;
#endif
/* odd buffer alignment? */
-#ifdef CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2
wsbh v1, sum
movn sum, v1, t7
#else
addu sum, v1
#endif
-#ifdef CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2
wsbh v1, sum
movn sum, v1, odd
#else
return;
default:
- if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
- c->isa_level == MIPS_CPU_ISA_M32R2 ||
- c->isa_level == MIPS_CPU_ISA_M64R1 ||
- c->isa_level == MIPS_CPU_ISA_M64R2) {
+ if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
+ MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) {
#ifdef CONFIG_MIPS_CPU_SCACHE
if (mips_sc_init ()) {
scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;
c->scache.flags |= MIPS_CACHE_NOT_PRESENT;
/* Ignore anything but MIPSxx processors */
- if (c->isa_level != MIPS_CPU_ISA_M32R1 &&
- c->isa_level != MIPS_CPU_ISA_M32R2 &&
- c->isa_level != MIPS_CPU_ISA_M64R1 &&
- c->isa_level != MIPS_CPU_ISA_M64R2)
+ if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
+ MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)))
return 0;
/* Does this MIPS32/MIPS64 CPU have a config2 register? */
#include <asm/mach-au1x00/au1000.h>
#include <asm/tlbmisc.h>
-#ifdef CONFIG_DEBUG_PCI
+#ifdef CONFIG_PCI_DEBUG
#define DBG(x...) printk(KERN_DEBUG x)
#else
#define DBG(x...) do {} while (0)
if (status & (1 << 29)) {
*data = 0xffffffff;
error = -1;
- DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d",
+ DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d\n",
access_type, bus->number, device);
} else if ((status >> 28) & 0xf) {
DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n",
select HAVE_ARCH_KGDB
select GENERIC_ATOMIC64
select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA
select OLD_SIGSUSPEND3
select OF_EARLY_FLATTREE
select IRQ_DOMAIN
select HAVE_MEMBLOCK
- select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARCH_REQUIRE_GPIOLIB
select HAVE_ARCH_TRACEHOOK
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_STRNCPY_FROM_USER
select SYSCTL_ARCH_UNALIGN_ALLOW
select HAVE_MOD_ARCH_SPECIFIC
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select MODULES_USE_ELF_RELA
select CLONE_BACKWARDS
select TTY # Needed for pdc_cons.c
config PPC
bool
default y
+ select BINFMT_ELF
select OF
select OF_EARLY_FLATTREE
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_GRAPH_TRACER
select SYSCTL_EXCEPTION_TRACE
select ARCH_WANT_OPTIONAL_GPIOLIB
- select HAVE_VIRT_TO_BUS if !PPC64
+ select VIRT_TO_BUS if !PPC64
select HAVE_IDE
select HAVE_IOREMAP_PROT
select HAVE_EFFICIENT_UNALIGNED_ACCESS
/*
* VSID allocation (256MB segment)
*
- * We first generate a 38-bit "proto-VSID". For kernel addresses this
- * is equal to the ESID | 1 << 37, for user addresses it is:
- * (context << USER_ESID_BITS) | (esid & ((1U << USER_ESID_BITS) - 1)
+ * We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated
+ * from mmu context id and effective segment id of the address.
*
- * This splits the proto-VSID into the below range
- * 0 - (2^(CONTEXT_BITS + USER_ESID_BITS) - 1) : User proto-VSID range
- * 2^(CONTEXT_BITS + USER_ESID_BITS) - 2^(VSID_BITS) : Kernel proto-VSID range
- *
- * We also have CONTEXT_BITS + USER_ESID_BITS = VSID_BITS - 1
- * That is, we assign half of the space to user processes and half
- * to the kernel.
+ * For user processes max context id is limited to ((1ul << 19) - 5)
+ * for kernel space, we use the top 4 context ids to map address as below
+ * NOTE: each context only support 64TB now.
+ * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ]
*
* The proto-VSIDs are then scrambled into real VSIDs with the
* multiplicative hash:
* VSID_MULTIPLIER is prime, so in particular it is
* co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
* Because the modulus is 2^n-1 we can compute it efficiently without
- * a divide or extra multiply (see below).
- *
- * This scheme has several advantages over older methods:
- *
- * - We have VSIDs allocated for every kernel address
- * (i.e. everything above 0xC000000000000000), except the very top
- * segment, which simplifies several things.
+ * a divide or extra multiply (see below). The scramble function gives
+ * robust scattering in the hash table (at least based on some initial
+ * results).
*
- * - We allow for USER_ESID_BITS significant bits of ESID and
- * CONTEXT_BITS bits of context for user addresses.
- * i.e. 64T (46 bits) of address space for up to half a million contexts.
+ * We also consider VSID 0 special. We use VSID 0 for slb entries mapping
+ * bad address. This enables us to consolidate bad address handling in
+ * hash_page.
*
- * - The scramble function gives robust scattering in the hash
- * table (at least based on some initial results). The previous
- * method was more susceptible to pathological cases giving excessive
- * hash collisions.
+ * We also need to avoid the last segment of the last context, because that
+ * would give a protovsid of 0x1fffffffff. That will result in a VSID 0
+ * because of the modulo operation in vsid scramble. But the vmemmap
+ * (which is what uses region 0xf) will never be close to 64TB in size
+ * (it's 56 bytes per page of system memory).
*/
+#define CONTEXT_BITS 19
+#define ESID_BITS 18
+#define ESID_BITS_1T 6
+
+/*
+ * 256MB segment
+ * The proto-VSID space has 2^(CONTEX_BITS + ESID_BITS) - 1 segments
+ * available for user + kernel mapping. The top 4 contexts are used for
+ * kernel mapping. Each segment contains 2^28 bytes. Each
+ * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
+ * (19 == 37 + 28 - 46).
+ */
+#define MAX_USER_CONTEXT ((ASM_CONST(1) << CONTEXT_BITS) - 5)
+
/*
* This should be computed such that protovosid * vsid_mulitplier
* doesn't overflow 64 bits. It should also be co-prime to vsid_modulus
*/
#define VSID_MULTIPLIER_256M ASM_CONST(12538073) /* 24-bit prime */
-#define VSID_BITS_256M 38
+#define VSID_BITS_256M (CONTEXT_BITS + ESID_BITS)
#define VSID_MODULUS_256M ((1UL<<VSID_BITS_256M)-1)
#define VSID_MULTIPLIER_1T ASM_CONST(12538073) /* 24-bit prime */
-#define VSID_BITS_1T 26
+#define VSID_BITS_1T (CONTEXT_BITS + ESID_BITS_1T)
#define VSID_MODULUS_1T ((1UL<<VSID_BITS_1T)-1)
-#define CONTEXT_BITS 19
-#define USER_ESID_BITS 18
-#define USER_ESID_BITS_1T 6
-#define USER_VSID_RANGE (1UL << (USER_ESID_BITS + SID_SHIFT))
+#define USER_VSID_RANGE (1UL << (ESID_BITS + SID_SHIFT))
/*
* This macro generates asm code to compute the VSID scramble
srdi rx,rt,VSID_BITS_##size; \
clrldi rt,rt,(64-VSID_BITS_##size); \
add rt,rt,rx; /* add high and low bits */ \
- /* Now, r3 == VSID (mod 2^36-1), and lies between 0 and \
+ /* NOTE: explanation based on VSID_BITS_##size = 36 \
+ * Now, r3 == VSID (mod 2^36-1), and lies between 0 and \
* 2^36-1+2^28-1. That in particular means that if r3 >= \
* 2^36-1, then r3+1 has the 2^36 bit set. So, if r3+1 has \
* the bit clear, r3 already has the answer we want, if it \
})
#endif /* 1 */
-/*
- * This is only valid for addresses >= PAGE_OFFSET
- * The proto-VSID space is divided into two class
- * User: 0 to 2^(CONTEXT_BITS + USER_ESID_BITS) -1
- * kernel: 2^(CONTEXT_BITS + USER_ESID_BITS) to 2^(VSID_BITS) - 1
- *
- * With KERNEL_START at 0xc000000000000000, the proto vsid for
- * the kernel ends up with 0xc00000000 (36 bits). With 64TB
- * support we need to have kernel proto-VSID in the
- * [2^37 to 2^38 - 1] range due to the increased USER_ESID_BITS.
- */
-static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
-{
- unsigned long proto_vsid;
- /*
- * We need to make sure proto_vsid for the kernel is
- * >= 2^(CONTEXT_BITS + USER_ESID_BITS[_1T])
- */
- if (ssize == MMU_SEGSIZE_256M) {
- proto_vsid = ea >> SID_SHIFT;
- proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS));
- return vsid_scramble(proto_vsid, 256M);
- }
- proto_vsid = ea >> SID_SHIFT_1T;
- proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS_1T));
- return vsid_scramble(proto_vsid, 1T);
-}
-
/* Returns the segment size indicator for a user address */
static inline int user_segment_size(unsigned long addr)
{
return MMU_SEGSIZE_256M;
}
-/* This is only valid for user addresses (which are below 2^44) */
static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
int ssize)
{
+ /*
+ * Bad address. We return VSID 0 for that
+ */
+ if ((ea & ~REGION_MASK) >= PGTABLE_RANGE)
+ return 0;
+
if (ssize == MMU_SEGSIZE_256M)
- return vsid_scramble((context << USER_ESID_BITS)
+ return vsid_scramble((context << ESID_BITS)
| (ea >> SID_SHIFT), 256M);
- return vsid_scramble((context << USER_ESID_BITS_1T)
+ return vsid_scramble((context << ESID_BITS_1T)
| (ea >> SID_SHIFT_1T), 1T);
}
+/*
+ * This is only valid for addresses >= PAGE_OFFSET
+ *
+ * For kernel space, we use the top 4 context ids to map address as below
+ * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ]
+ */
+static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
+{
+ unsigned long context;
+
+ /*
+ * kernel take the top 4 context from the available range
+ */
+ context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1;
+ return get_vsid(context, ea, ssize);
+}
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_MMU_HASH64_H_ */
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_PPC970,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
#include <asm/code-patching.h>
#include <asm/machdep.h>
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
extern void epapr_ev_idle(void);
extern u32 epapr_ev_idle_start[];
+#endif
bool epapr_paravirt_enabled;
for (i = 0; i < (len / 4); i++) {
patch_instruction(epapr_hypercall_start + i, insts[i]);
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
patch_instruction(epapr_ev_idle_start + i, insts[i]);
+#endif
}
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
if (of_get_property(hyper_node, "has-idle", NULL))
ppc_md.power_save = epapr_ev_idle;
+#endif
epapr_paravirt_enabled = true;
#endif /* __DISABLED__ */
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r12 contain the saved SRR1, SRR0 is still ready for return
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(slb_miss_realmode)
- mflr r10
-#ifdef CONFIG_RELOCATABLE
- mtctr r11
-#endif
-
- stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
- std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
-
- bl .slb_allocate_realmode
-
- /* All done -- return from exception. */
-
- ld r10,PACA_EXSLB+EX_LR(r13)
- ld r3,PACA_EXSLB+EX_R3(r13)
- lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
-
- mtlr r10
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- 2f
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
- mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
-.machine pop
-
- RESTORE_PPR_PACA(PACA_EXSLB, r9)
- ld r9,PACA_EXSLB+EX_R9(r13)
- ld r10,PACA_EXSLB+EX_R10(r13)
- ld r11,PACA_EXSLB+EX_R11(r13)
- ld r12,PACA_EXSLB+EX_R12(r13)
- ld r13,PACA_EXSLB+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-
-2: mfspr r11,SPRN_SRR0
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10,unrecov_slb)
- mtspr SPRN_SRR0,r10
- ld r10,PACAKMSR(r13)
- mtspr SPRN_SRR1,r10
- rfid
- b .
-
-unrecov_slb:
- EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
- DISABLE_INTS
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-
-#ifdef CONFIG_PPC_970_NAP
-power4_fixup_nap:
- andc r9,r9,r10
- std r9,TI_LOCAL_FLAGS(r11)
- ld r10,_LINK(r1) /* make idle task do the */
- std r10,_NIP(r1) /* equivalent of a blr */
- blr
-#endif
-
.align 7
.globl alignment_common
alignment_common:
#endif /* CONFIG_PPC_POWERNV */
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r12 contain the saved SRR1, SRR0 is still ready for return
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(slb_miss_realmode)
+ mflr r10
+#ifdef CONFIG_RELOCATABLE
+ mtctr r11
+#endif
+
+ stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
+ std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
+
+ bl .slb_allocate_realmode
+
+ /* All done -- return from exception. */
+
+ ld r10,PACA_EXSLB+EX_LR(r13)
+ ld r3,PACA_EXSLB+EX_R3(r13)
+ lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
+
+ mtlr r10
+
+ andi. r10,r12,MSR_RI /* check for unrecoverable exception */
+ beq- 2f
+
+.machine push
+.machine "power4"
+ mtcrf 0x80,r9
+ mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
+.machine pop
+
+ RESTORE_PPR_PACA(PACA_EXSLB, r9)
+ ld r9,PACA_EXSLB+EX_R9(r13)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ ld r11,PACA_EXSLB+EX_R11(r13)
+ ld r12,PACA_EXSLB+EX_R12(r13)
+ ld r13,PACA_EXSLB+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+
+2: mfspr r11,SPRN_SRR0
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10,unrecov_slb)
+ mtspr SPRN_SRR0,r10
+ ld r10,PACAKMSR(r13)
+ mtspr SPRN_SRR1,r10
+ rfid
+ b .
+
+unrecov_slb:
+ EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+ DISABLE_INTS
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+ andc r9,r9,r10
+ std r9,TI_LOCAL_FLAGS(r11)
+ ld r10,_LINK(r1) /* make idle task do the */
+ std r10,_NIP(r1) /* equivalent of a blr */
+ blr
+#endif
+
/*
* Hash table stuff
*/
_GLOBAL(do_stab_bolted)
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
+ mfspr r11,SPRN_DAR /* ea */
+ /*
+ * check for bad kernel/user address
+ * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+ */
+ rldicr. r9,r11,4,(63 - 46 - 4)
+ li r9,0 /* VSID = 0 for bad address */
+ bne- 0f
+
+ /*
+ * Calculate VSID:
+ * This is the kernel vsid, we take the top for context from
+ * the range. context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * Here we know that (ea >> 60) == 0xc
+ */
+ lis r9,(MAX_USER_CONTEXT + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT + 1)@l
+
+ srdi r10,r11,SID_SHIFT
+ rldimi r10,r9,ESID_BITS,0 /* proto vsid */
+ ASM_VSID_SCRAMBLE(r10, r9, 256M)
+ rldic r9,r10,12,16 /* r9 = vsid << 12 */
+
+0:
/* Hash to the primary group */
ld r10,PACASTABVIRT(r13)
- mfspr r11,SPRN_DAR
- srdi r11,r11,28
+ srdi r11,r11,SID_SHIFT
rldimi r10,r11,7,52 /* r10 = first ste of the group */
- /* Calculate VSID */
- /* This is a kernel address, so protovsid = ESID | 1 << 37 */
- li r9,0x1
- rldimi r11,r9,(CONTEXT_BITS + USER_ESID_BITS),0
- ASM_VSID_SCRAMBLE(r11, r9, 256M)
- rldic r9,r11,12,16 /* r9 = vsid << 12 */
-
/* Search the primary group for a free entry */
1: ld r11,0(r10) /* Test valid bit of the current ste */
andi. r11,r11,0x80
{
}
#else
-static void __reloc_toc(void *tocstart, unsigned long offset,
- unsigned long nr_entries)
+static void __reloc_toc(unsigned long offset, unsigned long nr_entries)
{
unsigned long i;
- unsigned long *toc_entry = (unsigned long *)tocstart;
+ unsigned long *toc_entry;
+
+ /* Get the start of the TOC by using r2 directly. */
+ asm volatile("addi %0,2,-0x8000" : "=b" (toc_entry));
for (i = 0; i < nr_entries; i++) {
*toc_entry = *toc_entry + offset;
unsigned long nr_entries =
(__prom_init_toc_end - __prom_init_toc_start) / sizeof(long);
- /* Need to add offset to get at __prom_init_toc_start */
- __reloc_toc(__prom_init_toc_start + offset, offset, nr_entries);
+ __reloc_toc(offset, nr_entries);
mb();
}
mb();
- /* __prom_init_toc_start has been relocated, no need to add offset */
- __reloc_toc(__prom_init_toc_start, -offset, nr_entries);
+ __reloc_toc(-offset, nr_entries);
}
#endif
#endif
brk.address = bp_info->addr & ~7UL;
brk.type = HW_BRK_TYPE_TRANSLATE;
+ brk.len = 8;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
brk.type |= HW_BRK_TYPE_READ;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
vcpu3s->context_id[0] = err;
vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1)
- << USER_ESID_BITS) - 1;
- vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
+ << ESID_BITS) - 1;
+ vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << ESID_BITS;
vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first;
kvmppc_mmu_hpte_init(vcpu);
unsigned long vpn = hpt_vpn(vaddr, vsid, ssize);
unsigned long tprot = prot;
+ /*
+ * If we hit a bad address return error.
+ */
+ if (!vsid)
+ return -1;
/* Make kernel text executable */
if (overlaps_kernel_text(vaddr, vaddr + step))
tprot &= ~HPTE_R_N;
/* Initialize stab / SLB management */
if (mmu_has_feature(MMU_FTR_SLB))
slb_initialize();
+ else
+ stab_initialize(get_paca()->stab_real);
}
#ifdef CONFIG_SMP
DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n",
ea, access, trap);
- if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) {
- DBG_LOW(" out of pgtable range !\n");
- return 1;
- }
-
/* Get region & vsid */
switch (REGION_ID(ea)) {
case USER_REGION_ID:
}
DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid);
+ /* Bad address. */
+ if (!vsid) {
+ DBG_LOW("Bad address!\n");
+ return 1;
+ }
/* Get pgdir */
pgdir = mm->pgd;
if (pgdir == NULL)
/* Get VSID */
ssize = user_segment_size(ea);
vsid = get_vsid(mm->context.id, ea, ssize);
+ if (!vsid)
+ return;
/* Hash doesn't like irqs */
local_irq_save(flags);
hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize);
hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+ /* Don't create HPTE entries for bad address */
+ if (!vsid)
+ return;
ret = ppc_md.hpte_insert(hpteg, vpn, __pa(vaddr),
mode, HPTE_V_BOLTED,
mmu_linear_psize, mmu_kernel_ssize);
static DEFINE_SPINLOCK(mmu_context_lock);
static DEFINE_IDA(mmu_context_ida);
-/*
- * 256MB segment
- * The proto-VSID space has 2^(CONTEX_BITS + USER_ESID_BITS) - 1 segments
- * available for user mappings. Each segment contains 2^28 bytes. Each
- * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
- * (19 == 37 + 28 - 46).
- */
-#define MAX_CONTEXT ((1UL << CONTEXT_BITS) - 1)
-
int __init_new_context(void)
{
int index;
else if (err)
return err;
- if (index > MAX_CONTEXT) {
+ if (index > MAX_USER_CONTEXT) {
spin_lock(&mmu_context_lock);
ida_remove(&mmu_context_ida, index);
spin_unlock(&mmu_context_lock);
#endif
#ifdef CONFIG_PPC_STD_MMU_64
-#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
+#if TASK_SIZE_USER64 > (1UL << (ESID_BITS + SID_SHIFT))
#error TASK_SIZE_USER64 exceeds user VSID range
#endif
#endif
* No other registers are examined or changed.
*/
_GLOBAL(slb_allocate_realmode)
- /* r3 = faulting address */
+ /*
+ * check for bad kernel/user address
+ * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+ */
+ rldicr. r9,r3,4,(63 - 46 - 4)
+ bne- 8f
srdi r9,r3,60 /* get region */
- srdi r10,r3,28 /* get esid */
+ srdi r10,r3,SID_SHIFT /* get esid */
cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */
/* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
*/
_GLOBAL(slb_miss_kernel_load_linear)
li r11,0
- li r9,0x1
/*
- * for 1T we shift 12 bits more. slb_finish_load_1T will do
- * the necessary adjustment
+ * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * r9 = region id.
*/
- rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+ addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
+
BEGIN_FTR_SECTION
b slb_finish_load
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
_GLOBAL(slb_miss_kernel_load_io)
li r11,0
6:
- li r9,0x1
/*
- * for 1T we shift 12 bits more. slb_finish_load_1T will do
- * the necessary adjustment
+ * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * r9 = region id.
*/
- rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+ addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
BEGIN_FTR_SECTION
b slb_finish_load
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
b slb_finish_load_1T
-0: /* user address: proto-VSID = context << 15 | ESID. First check
- * if the address is within the boundaries of the user region
- */
- srdi. r9,r10,USER_ESID_BITS
- bne- 8f /* invalid ea bits set */
-
-
+0:
/* when using slices, we extract the psize off the slice bitmaps
* and then we need to get the sllp encoding off the mmu_psize_defs
* array.
ld r9,PACACONTEXTID(r13)
BEGIN_FTR_SECTION
cmpldi r10,0x1000
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
- rldimi r10,r9,USER_ESID_BITS,0
-BEGIN_FTR_SECTION
bge slb_finish_load_1T
END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
b slb_finish_load
8: /* invalid EA */
li r10,0 /* BAD_VSID */
+ li r9,0 /* BAD_VSID */
li r11,SLB_VSID_USER /* flags don't much matter */
b slb_finish_load
/* get context to calculate proto-VSID */
ld r9,PACACONTEXTID(r13)
- rldimi r10,r9,USER_ESID_BITS,0
-
/* fall through slb_finish_load */
#endif /* __DISABLED__ */
/*
* Finish loading of an SLB entry and return
*
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
+ * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
*/
slb_finish_load:
+ rldimi r10,r9,ESID_BITS,0
ASM_VSID_SCRAMBLE(r10,r9,256M)
/*
* bits above VSID_BITS_256M need to be ignored from r10
/*
* Finish loading of a 1T SLB entry (for the kernel linear mapping) and return.
*
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9
+ * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9
*/
slb_finish_load_1T:
- srdi r10,r10,40-28 /* get 1T ESID */
+ srdi r10,r10,(SID_SHIFT_1T - SID_SHIFT) /* get 1T ESID */
+ rldimi r10,r9,ESID_BITS_1T,0
ASM_VSID_SCRAMBLE(r10,r9,1T)
/*
* bits above VSID_BITS_1T need to be ignored from r10
if (!is_kernel_addr(addr)) {
ssize = user_segment_size(addr);
vsid = get_vsid(mm->context.id, addr, ssize);
- WARN_ON(vsid == 0);
} else {
vsid = get_kernel_vsid(addr, mmu_kernel_ssize);
ssize = mmu_kernel_ssize;
}
+ WARN_ON(vsid == 0);
vpn = hpt_vpn(addr, vsid, ssize);
rpte = __real_pte(__pte(pte), ptep);
.attrs = power7_events_attr,
};
+PMU_FORMAT_ATTR(event, "config:0-19");
+
+static struct attribute *power7_pmu_format_attr[] = {
+ &format_attr_event.attr,
+ NULL,
+};
+
+struct attribute_group power7_pmu_format_group = {
+ .name = "format",
+ .attrs = power7_pmu_format_attr,
+};
+
static const struct attribute_group *power7_pmu_attr_groups[] = {
+ &power7_pmu_format_group,
&power7_pmu_events_group,
NULL,
};
return IRQ_HANDLED;
};
-static int __devinit gpio_halt_probe(struct platform_device *pdev)
+static int gpio_halt_probe(struct platform_device *pdev)
{
enum of_gpio_flags flags;
struct device_node *node = pdev->dev.of_node;
return 0;
}
-static int __devexit gpio_halt_remove(struct platform_device *pdev)
+static int gpio_halt_remove(struct platform_device *pdev)
{
if (halt_node) {
int gpio = of_get_gpio(halt_node, 0);
.of_match_table = gpio_halt_match,
},
.probe = gpio_halt_probe,
- .remove = __devexit_p(gpio_halt_remove),
+ .remove = gpio_halt_remove,
};
module_platform_driver(gpio_halt_driver);
select PPC_HAVE_PMU_SUPPORT
config POWER3
- bool
depends on PPC64 && PPC_BOOK3S
- default y if !POWER4_ONLY
+ def_bool y
config POWER4
depends on PPC64 && PPC_BOOK3S
but somewhat slower on other machines. This option only changes
the scheduling of instructions, not the selection of instructions
itself, so the resulting kernel will keep running on all other
- machines. When building a kernel that is supposed to run only
- on Cell, you should also select the POWER4_ONLY option.
+ machines.
# this is temp to handle compat with arch=ppc
config 8xx
select HAVE_SYSCALL_WRAPPERS
select HAVE_UID16 if 32BIT
select HAVE_VIRT_CPU_ACCOUNTING
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select INIT_ALL_POSSIBLE
select KTIME_SCALAR if 32BIT
select MODULES_USE_ELF_RELA
#ifndef _ASM_S390_CPU_MF_H
#define _ASM_S390_CPU_MF_H
+#include <linux/errno.h>
#include <asm/facility.h>
#define CPU_MF_INT_SF_IAE (1 << 31) /* invalid entry address */
u32 reserved[4];
} __packed;
+#define EQC_WR_PROHIBIT 22
+
struct msb {
u8 fmt:4;
u8 oc:4;
#define OP_STATE_TEMP_ERR 2
#define OP_STATE_PERM_ERR 3
+enum scm_event {SCM_CHANGE, SCM_AVAIL};
+
struct scm_driver {
struct device_driver drv;
int (*probe) (struct scm_device *scmdev);
int (*remove) (struct scm_device *scmdev);
- void (*notify) (struct scm_device *scmdev);
+ void (*notify) (struct scm_device *scmdev, enum scm_event event);
void (*handler) (struct scm_device *scmdev, void *data, int error);
};
#define _REGION3_ENTRY_CO 0x100 /* change-recording override */
/* Bits in the segment table entry */
+#define _SEGMENT_ENTRY_ORIGIN_LARGE ~0xfffffUL /* large page address */
#define _SEGMENT_ENTRY_ORIGIN ~0x7ffUL/* segment table origin */
#define _SEGMENT_ENTRY_RO 0x200 /* page protection bit */
#define _SEGMENT_ENTRY_INV 0x20 /* invalid segment table entry */
/*
* No page table caches to initialise
*/
-#define pgtable_cache_init() do { } while (0)
+static inline void pgtable_cache_init(void) { }
+static inline void check_pgt_cache(void) { }
#include <asm-generic/pgtable.h>
static inline void __tlb_flush_mm(struct mm_struct * mm)
{
- if (unlikely(cpumask_empty(mm_cpumask(mm))))
- return;
/*
* If the machine has IDTE we prefer to do a per mm flush
* on all cpus instead of doing a local flush if the mm
UPDATE_VTIME %r14,%r15,__LC_MCCK_ENTER_TIMER
mcck_skip:
SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+32,__LC_PANIC_STACK,PAGE_SHIFT
- mvc __PT_R0(64,%r11),__LC_GPREGS_SAVE_AREA
+ stm %r0,%r7,__PT_R0(%r11)
+ mvc __PT_R8(32,%r11),__LC_GPREGS_SAVE_AREA+32
stm %r8,%r9,__PT_PSW(%r11)
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
l %r1,BASED(.Ldo_machine_check)
UPDATE_VTIME %r14,__LC_MCCK_ENTER_TIMER
LAST_BREAK %r14
mcck_skip:
- lghi %r14,__LC_GPREGS_SAVE_AREA
- mvc __PT_R0(128,%r11),0(%r14)
+ lghi %r14,__LC_GPREGS_SAVE_AREA+64
+ stmg %r0,%r7,__PT_R0(%r11)
+ mvc __PT_R8(64,%r11),0(%r14)
stmg %r8,%r9,__PT_PSW(%r11)
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
/* Split remaining virtual space between 1:1 mapping & vmemmap array */
tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page));
+ /* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */
+ tmp = SECTION_ALIGN_UP(tmp);
tmp = VMALLOC_START - tmp * sizeof(struct page);
tmp &= ~((vmax >> 11) - 1); /* align to page table level */
tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS);
* >= -4095 (IS_ERR_VALUE(x) returns true), a fault has occured and the address
* contains the (negative) exception code.
*/
-static __always_inline unsigned long follow_table(struct mm_struct *mm,
- unsigned long addr, int write)
+#ifdef CONFIG_64BIT
+static unsigned long follow_table(struct mm_struct *mm,
+ unsigned long address, int write)
{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *ptep;
+ unsigned long *table = (unsigned long *)__pa(mm->pgd);
+
+ switch (mm->context.asce_bits & _ASCE_TYPE_MASK) {
+ case _ASCE_TYPE_REGION1:
+ table = table + ((address >> 53) & 0x7ff);
+ if (unlikely(*table & _REGION_ENTRY_INV))
+ return -0x39UL;
+ table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+ case _ASCE_TYPE_REGION2:
+ table = table + ((address >> 42) & 0x7ff);
+ if (unlikely(*table & _REGION_ENTRY_INV))
+ return -0x3aUL;
+ table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+ case _ASCE_TYPE_REGION3:
+ table = table + ((address >> 31) & 0x7ff);
+ if (unlikely(*table & _REGION_ENTRY_INV))
+ return -0x3bUL;
+ table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+ case _ASCE_TYPE_SEGMENT:
+ table = table + ((address >> 20) & 0x7ff);
+ if (unlikely(*table & _SEGMENT_ENTRY_INV))
+ return -0x10UL;
+ if (unlikely(*table & _SEGMENT_ENTRY_LARGE)) {
+ if (write && (*table & _SEGMENT_ENTRY_RO))
+ return -0x04UL;
+ return (*table & _SEGMENT_ENTRY_ORIGIN_LARGE) +
+ (address & ~_SEGMENT_ENTRY_ORIGIN_LARGE);
+ }
+ table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN);
+ }
+ table = table + ((address >> 12) & 0xff);
+ if (unlikely(*table & _PAGE_INVALID))
+ return -0x11UL;
+ if (write && (*table & _PAGE_RO))
+ return -0x04UL;
+ return (*table & PAGE_MASK) + (address & ~PAGE_MASK);
+}
- pgd = pgd_offset(mm, addr);
- if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
- return -0x3aUL;
+#else /* CONFIG_64BIT */
- pud = pud_offset(pgd, addr);
- if (pud_none(*pud) || unlikely(pud_bad(*pud)))
- return -0x3bUL;
+static unsigned long follow_table(struct mm_struct *mm,
+ unsigned long address, int write)
+{
+ unsigned long *table = (unsigned long *)__pa(mm->pgd);
- pmd = pmd_offset(pud, addr);
- if (pmd_none(*pmd))
+ table = table + ((address >> 20) & 0x7ff);
+ if (unlikely(*table & _SEGMENT_ENTRY_INV))
return -0x10UL;
- if (pmd_large(*pmd)) {
- if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO))
- return -0x04UL;
- return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK);
- }
- if (unlikely(pmd_bad(*pmd)))
- return -0x10UL;
-
- ptep = pte_offset_map(pmd, addr);
- if (!pte_present(*ptep))
+ table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN);
+ table = table + ((address >> 12) & 0xff);
+ if (unlikely(*table & _PAGE_INVALID))
return -0x11UL;
- if (write && (!pte_write(*ptep) || !pte_dirty(*ptep)))
+ if (write && (*table & _PAGE_RO))
return -0x04UL;
-
- return (pte_val(*ptep) & PAGE_MASK) + (addr & ~PAGE_MASK);
+ return (*table & PAGE_MASK) + (address & ~PAGE_MASK);
}
+#endif /* CONFIG_64BIT */
+
static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr,
size_t n, int write_user)
{
static size_t clear_user_pt(size_t n, void __user *to)
{
- void *zpage = &empty_zero_page;
+ void *zpage = (void *) empty_zero_page;
long done, size, ret;
done = 0;
select GENERIC_CPU_DEVICES
select GENERIC_CLOCKEVENTS
select HAVE_MOD_ARCH_SPECIFIC
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select MODULES_USE_ELF_REL
select CLONE_BACKWARDS
default "arch/sparc/configs/sparc32_defconfig" if SPARC32
default "arch/sparc/configs/sparc64_defconfig" if SPARC64
-# CONFIG_BITS can be used at source level to get 32/64 bits
-config BITS
- int
- default 32 if SPARC32
- default 64 if SPARC64
-
config IOMMU_HELPER
bool
default y if SPARC64
config GENERIC_HWEIGHT
bool
- default y if !ULTRA_HAS_POPULATION_COUNT
+ default y
config GENERIC_CALIBRATE_DELAY
bool
#define SUN4V_CHIP_NIAGARA3 0x03
#define SUN4V_CHIP_NIAGARA4 0x04
#define SUN4V_CHIP_NIAGARA5 0x05
+#define SUN4V_CHIP_SPARC64X 0x8a
#define SUN4V_CHIP_UNKNOWN 0xff
#ifndef __ASSEMBLY__
sparc_pmu_type = "niagara5";
break;
+ case SUN4V_CHIP_SPARC64X:
+ sparc_cpu_type = "SPARC64-X";
+ sparc_fpu_type = "SPARC64-X integrated FPU";
+ sparc_pmu_type = "sparc64-x";
+ break;
+
default:
printk(KERN_WARNING "CPU: Unknown sun4v cpu type [%s]\n",
prom_cpu_compatible);
.asciz "SUNW,UltraSPARC-T"
prom_sparc_prefix:
.asciz "SPARC-"
+prom_sparc64x_prefix:
+ .asciz "SPARC64-X"
.align 4
prom_root_compatible:
.skip 64
cmp %g2, 'T'
be,pt %xcc, 70f
cmp %g2, 'M'
- bne,pn %xcc, 4f
+ bne,pn %xcc, 49f
nop
70: ldub [%g1 + 7], %g2
cmp %g2, '5'
be,pt %xcc, 5f
mov SUN4V_CHIP_NIAGARA5, %g4
- ba,pt %xcc, 4f
+ ba,pt %xcc, 49f
nop
91: sethi %hi(prom_cpu_compatible), %g1
mov SUN4V_CHIP_NIAGARA2, %g4
4:
+ /* Athena */
+ sethi %hi(prom_cpu_compatible), %g1
+ or %g1, %lo(prom_cpu_compatible), %g1
+ sethi %hi(prom_sparc64x_prefix), %g7
+ or %g7, %lo(prom_sparc64x_prefix), %g7
+ mov 9, %g3
+41: ldub [%g7], %g2
+ ldub [%g1], %g4
+ cmp %g2, %g4
+ bne,pn %icc, 49f
+ add %g7, 1, %g7
+ subcc %g3, 1, %g3
+ bne,pt %xcc, 41b
+ add %g1, 1, %g1
+ mov SUN4V_CHIP_SPARC64X, %g4
+ ba,pt %xcc, 5f
+ nop
+
+49:
mov SUN4V_CHIP_UNKNOWN, %g4
5: sethi %hi(sun4v_chip_type), %g2
or %g2, %lo(sun4v_chip_type), %g2
#define CAP9_IOMAP_OFS 0x20
#define CAP9_BARSIZE_OFS 0x24
+#define TGT 256
+
struct grpci2_priv {
struct leon_pci_info info; /* must be on top of this structure */
struct grpci2_regs *regs;
if (where & 0x3)
return -EINVAL;
- if (bus == 0 && PCI_SLOT(devfn) != 0)
- devfn += (0x8 * 6);
+ if (bus == 0) {
+ devfn += (0x8 * 6); /* start at AD16=Device0 */
+ } else if (bus == TGT) {
+ bus = 0;
+ devfn = 0; /* special case: bridge controller itself */
+ }
/* Select bus */
spin_lock_irqsave(&grpci2_dev_lock, flags);
if (where & 0x3)
return -EINVAL;
- if (bus == 0 && PCI_SLOT(devfn) != 0)
- devfn += (0x8 * 6);
+ if (bus == 0) {
+ devfn += (0x8 * 6); /* start at AD16=Device0 */
+ } else if (bus == TGT) {
+ bus = 0;
+ devfn = 0; /* special case: bridge controller itself */
+ }
/* Select bus */
spin_lock_irqsave(&grpci2_dev_lock, flags);
unsigned int busno = bus->number;
int ret;
- if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) {
+ if (PCI_SLOT(devfn) > 15 || busno > 255) {
*val = ~0;
return 0;
}
struct grpci2_priv *priv = grpci2priv;
unsigned int busno = bus->number;
- if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0))
+ if (PCI_SLOT(devfn) > 15 || busno > 255)
return 0;
#ifdef GRPCI2_DEBUG_CFGACCESS
REGSTORE(regs->ahbmst_map[i], priv->pci_area);
/* Get the GRPCI2 Host PCI ID */
- grpci2_cfg_r32(priv, 0, 0, PCI_VENDOR_ID, &priv->pciid);
+ grpci2_cfg_r32(priv, TGT, 0, PCI_VENDOR_ID, &priv->pciid);
/* Get address to first (always defined) capability structure */
- grpci2_cfg_r8(priv, 0, 0, PCI_CAPABILITY_LIST, &capptr);
+ grpci2_cfg_r8(priv, TGT, 0, PCI_CAPABILITY_LIST, &capptr);
/* Enable/Disable Byte twisting */
- grpci2_cfg_r32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, &io_map);
+ grpci2_cfg_r32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, &io_map);
io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0);
- grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, io_map);
+ grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, io_map);
/* Setup the Host's PCI Target BARs for other peripherals to access,
* and do DMA to the host's memory. The target BARs can be sized and
pciadr = 0;
}
}
- grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BARSIZE_OFS+i*4, bar_sz);
- grpci2_cfg_w32(priv, 0, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
- grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
+ grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BARSIZE_OFS+i*4,
+ bar_sz);
+ grpci2_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
+ grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n",
i, pciadr, ahbadr);
}
/* set as bus master and enable pci memory responses */
- grpci2_cfg_r32(priv, 0, 0, PCI_COMMAND, &data);
+ grpci2_cfg_r32(priv, TGT, 0, PCI_COMMAND, &data);
data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
- grpci2_cfg_w32(priv, 0, 0, PCI_COMMAND, data);
+ grpci2_cfg_w32(priv, TGT, 0, PCI_COMMAND, data);
/* Enable Error respone (CPU-TRAP) on illegal memory access. */
REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE);
select GENERIC_IRQ_SHOW
select HAVE_DEBUG_BUGVERBOSE
select HAVE_SYSCALL_WRAPPERS if TILEGX
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select SYS_HYPERVISOR
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_CLOCKEVENTS
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-CONFIG_MULTICORE_RAID456=y
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-CONFIG_MULTICORE_RAID456=y
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
#ifdef CONFIG_BLK_DEV_INITRD
-/*
- * Note that the kernel can potentially support other compression
- * techniques than gz, though we don't do so by default. If we ever
- * decide to do so we can either look for other filename extensions,
- * or just allow a file with this name to be compressed with an
- * arbitrary compressor (somewhat counterintuitively).
- */
static int __initdata set_initramfs_file;
-static char __initdata initramfs_file[128] = "initramfs.cpio.gz";
+static char __initdata initramfs_file[128] = "initramfs";
static int __init setup_initramfs_file(char *str)
{
early_param("initramfs_file", setup_initramfs_file);
/*
- * We look for an "initramfs.cpio.gz" file in the hvfs.
- * If there is one, we allocate some memory for it and it will be
- * unpacked to the initramfs.
+ * We look for a file called "initramfs" in the hvfs. If there is one, we
+ * allocate some memory for it and it will be unpacked to the initramfs.
+ * If it's compressed, the initd code will uncompress it first.
*/
static void __init load_hv_initrd(void)
{
fd = hv_fs_findfile((HV_VirtAddr) initramfs_file);
if (fd == HV_ENOENT) {
- if (set_initramfs_file)
+ if (set_initramfs_file) {
pr_warning("No such hvfs initramfs file '%s'\n",
initramfs_file);
- return;
+ return;
+ } else {
+ /* Try old backwards-compatible name. */
+ fd = hv_fs_findfile((HV_VirtAddr)"initramfs.cpio.gz");
+ if (fd == HV_ENOENT)
+ return;
+ }
}
BUG_ON(fd < 0);
stat = hv_fs_fstat(fd);
extern int console_open_chan(struct line *line, struct console *co);
extern void deactivate_chan(struct chan *chan, int irq);
extern void reactivate_chan(struct chan *chan, int irq);
-extern void chan_enable_winch(struct chan *chan, struct tty_struct *tty);
+extern void chan_enable_winch(struct chan *chan, struct tty_port *port);
extern int enable_chan(struct line *line);
extern void close_chan(struct line *line);
extern int chan_window_size(struct line *line,
return err;
}
-void chan_enable_winch(struct chan *chan, struct tty_struct *tty)
+void chan_enable_winch(struct chan *chan, struct tty_port *port)
{
if (chan && chan->primary && chan->ops->winch)
- register_winch(chan->fd, tty);
+ register_winch(chan->fd, port);
}
static void line_timer_cb(struct work_struct *work)
}
}
-static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out,
+static int winch_tramp(int fd, struct tty_port *port, int *fd_out,
unsigned long *stack_out)
{
struct winch_data data;
return err;
}
-void register_winch(int fd, struct tty_struct *tty)
+void register_winch(int fd, struct tty_port *port)
{
unsigned long stack;
int pid, thread, count, thread_fd = -1;
return;
pid = tcgetpgrp(fd);
- if (is_skas_winch(pid, fd, tty)) {
- register_winch_irq(-1, fd, -1, tty, 0);
+ if (is_skas_winch(pid, fd, port)) {
+ register_winch_irq(-1, fd, -1, port, 0);
return;
}
if (pid == -1) {
- thread = winch_tramp(fd, tty, &thread_fd, &stack);
+ thread = winch_tramp(fd, port, &thread_fd, &stack);
if (thread < 0)
return;
- register_winch_irq(thread_fd, fd, thread, tty, stack);
+ register_winch_irq(thread_fd, fd, thread, port, stack);
count = write(thread_fd, &c, sizeof(c));
if (count != sizeof(c))
unsigned short *cols_out);
extern void generic_free(void *data);
-struct tty_struct;
-extern void register_winch(int fd, struct tty_struct *tty);
+struct tty_port;
+extern void register_winch(int fd, struct tty_port *port);
extern void register_winch_irq(int fd, int tty_fd, int pid,
- struct tty_struct *tty, unsigned long stack);
+ struct tty_port *port, unsigned long stack);
#define __channel_help(fn, prefix) \
__uml_help(fn, prefix "[0-9]*=<channel description>\n" \
return ret;
if (!line->sigio) {
- chan_enable_winch(line->chan_out, tty);
+ chan_enable_winch(line->chan_out, port);
line->sigio = 1;
}
return 0;
}
+static void unregister_winch(struct tty_struct *tty);
+
+static void line_destruct(struct tty_port *port)
+{
+ struct tty_struct *tty = tty_port_tty_get(port);
+ struct line *line = tty->driver_data;
+
+ if (line->sigio) {
+ unregister_winch(tty);
+ line->sigio = 0;
+ }
+}
+
static const struct tty_port_operations line_port_ops = {
.activate = line_activate,
+ .destruct = line_destruct,
};
int line_open(struct tty_struct *tty, struct file *filp)
return 0;
}
-static void unregister_winch(struct tty_struct *tty);
-
-void line_cleanup(struct tty_struct *tty)
-{
- struct line *line = tty->driver_data;
-
- if (line->sigio) {
- unregister_winch(tty);
- line->sigio = 0;
- }
-}
-
void line_close(struct tty_struct *tty, struct file * filp)
{
struct line *line = tty->driver_data;
int fd;
int tty_fd;
int pid;
- struct tty_struct *tty;
+ struct tty_port *port;
unsigned long stack;
struct work_struct work;
};
goto out;
}
}
- tty = winch->tty;
+ tty = tty_port_tty_get(winch->port);
if (tty != NULL) {
line = tty->driver_data;
if (line != NULL) {
&tty->winsize.ws_col);
kill_pgrp(tty->pgrp, SIGWINCH, 1);
}
+ tty_kref_put(tty);
}
out:
if (winch->fd != -1)
return IRQ_HANDLED;
}
-void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty,
+void register_winch_irq(int fd, int tty_fd, int pid, struct tty_port *port,
unsigned long stack)
{
struct winch *winch;
.fd = fd,
.tty_fd = tty_fd,
.pid = pid,
- .tty = tty,
+ .port = port,
.stack = stack });
if (um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt,
{
struct list_head *ele, *next;
struct winch *winch;
+ struct tty_struct *wtty;
spin_lock(&winch_handler_lock);
list_for_each_safe(ele, next, &winch_handlers) {
winch = list_entry(ele, struct winch, list);
- if (winch->tty == tty) {
+ wtty = tty_port_tty_get(winch->port);
+ if (wtty == tty) {
free_winch(winch);
break;
}
+ tty_kref_put(wtty);
}
spin_unlock(&winch_handler_lock);
}
spin_lock_irqsave(&lp->lock, flags);
len = (*lp->write)(lp->fd, skb, lp);
+ skb_tx_timestamp(skb);
if (len == skb->len) {
dev->stats.tx_packets++;
static const struct ethtool_ops uml_net_ethtool_ops = {
.get_drvinfo = uml_net_get_drvinfo,
.get_link = ethtool_op_get_link,
+ .get_ts_info = ethtool_op_get_ts_info,
};
static void uml_net_user_timer_expire(unsigned long _conn)
.throttle = line_throttle,
.unthrottle = line_unthrottle,
.install = ssl_install,
- .cleanup = line_cleanup,
.hangup = line_hangup,
};
.set_termios = line_set_termios,
.throttle = line_throttle,
.unthrottle = line_unthrottle,
- .cleanup = line_cleanup,
.hangup = line_hangup,
};
#include <sysdep/mcontext.h>
#include "internal.h"
-void (*sig_info[NSIG])(int, siginfo_t *, struct uml_pt_regs *) = {
+void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = {
[SIGTRAP] = relay_signal,
[SIGFPE] = relay_signal,
[SIGILL] = relay_signal,
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/wait.h>
+#include <sys/time.h>
+#include <sys/resource.h>
#include <asm/unistd.h>
#include <init.h>
#include <os.h>
select GENERIC_ATOMIC64
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_HAVE_CUSTOM_GPIO_H
select GENERIC_FIND_FIRST_BIT
select GENERIC_IRQ_PROBE
select GENERIC_STRNLEN_USER
select HAVE_CONTEXT_TRACKING if X86_64
select HAVE_IRQ_TIME_ACCOUNTING
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select MODULES_USE_ELF_REL if X86_32
select MODULES_USE_ELF_RELA if X86_64
select CLONE_BACKWARDS if X86_32
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo head_$(BITS).o misc.o string.o cmdline.o early_serial_console.o piggy.o
+targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
$(obj)/piggy.o
$(obj)/eboot.o: KBUILD_CFLAGS += -fshort-wchar -mno-red-zone
-$(obj)/efi_stub_$(BITS).o: KBUILD_CLFAGS += -fshort-wchar -mno-red-zone
ifeq ($(CONFIG_EFI_STUB), y)
VMLINUX_OBJS += $(obj)/eboot.o $(obj)/efi_stub_$(BITS).o
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
-targets += vmlinux.bin.all vmlinux.relocs
+targets += $(patsubst $(obj)/%,%,$(VMLINUX_OBJS)) vmlinux.bin.all vmlinux.relocs
CMD_RELOCS = arch/x86/tools/relocs
quiet_cmd_relocs = RELOCS $@
* a post_handler or break_handler).
*/
int boostable;
+ bool if_modifier;
};
struct arch_optimized_insn {
gpa_t time;
struct pvclock_vcpu_time_info hv_clock;
unsigned int hw_tsc_khz;
- unsigned int time_offset;
- struct page *time_page;
+ struct gfn_to_hva_cache pv_time;
+ bool pv_time_enabled;
/* set guest stopped flag in pvclock flags field */
bool pvclock_set_guest_stopped_request;
*/
static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
{
- return regs->orig_ax & __SYSCALL_MASK;
+ return regs->orig_ax;
}
static inline void syscall_rollback(struct task_struct *task,
struct pt_regs *regs)
{
- regs->ax = regs->orig_ax & __SYSCALL_MASK;
+ regs->ax = regs->orig_ax;
}
static inline long syscall_get_error(struct task_struct *task,
return _hypercall3(int, console_io, cmd, count, str);
}
-extern int __must_check HYPERVISOR_physdev_op_compat(int, void *);
+extern int __must_check xen_physdev_op_compat(int, void *);
static inline int
HYPERVISOR_physdev_op(int cmd, void *arg)
{
int rc = _hypercall2(int, physdev_op, cmd, arg);
if (unlikely(rc == -ENOSYS))
- rc = HYPERVISOR_physdev_op_compat(cmd, arg);
+ rc = xen_physdev_op_compat(cmd, arg);
return rc;
}
#define SNB_C1_AUTO_UNDEMOTE (1UL << 27)
#define SNB_C3_AUTO_UNDEMOTE (1UL << 28)
+#define MSR_PLATFORM_INFO 0x000000ce
#define MSR_MTRRcap 0x000000fe
#define MSR_IA32_BBL_CR_CTL 0x00000119
#define MSR_IA32_BBL_CR_CTL3 0x0000011e
FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
+ INTEL_UEVENT_CONSTRAINT(0x04a3, 0xf), /* CYCLE_ACTIVITY.CYCLES_NO_DISPATCH */
+ INTEL_UEVENT_CONSTRAINT(0x05a3, 0xf), /* CYCLE_ACTIVITY.STALLS_L2_PENDING */
+ INTEL_UEVENT_CONSTRAINT(0x02a3, 0x4), /* CYCLE_ACTIVITY.CYCLES_L1D_PENDING */
+ INTEL_UEVENT_CONSTRAINT(0x06a3, 0x4), /* CYCLE_ACTIVITY.STALLS_L1D_PENDING */
INTEL_EVENT_CONSTRAINT(0x48, 0x4), /* L1D_PEND_MISS.PENDING */
INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PREC_DIST */
INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.LOAD_LATENCY */
}
}
}
+
+void perf_restore_debug_store(void)
+{
+ struct debug_store *ds = __this_cpu_read(cpu_hw_events.ds);
+
+ if (!x86_pmu.bts && !x86_pmu.pebs)
+ return;
+
+ wrmsrl(MSR_IA32_DS_AREA, (unsigned long)ds);
+}
else
p->ainsn.boostable = -1;
+ /* Check whether the instruction modifies Interrupt Flag or not */
+ p->ainsn.if_modifier = is_IF_modifier(p->ainsn.insn);
+
/* Also, displacement change doesn't affect the first byte */
p->opcode = p->ainsn.insn[0];
}
__this_cpu_write(current_kprobe, p);
kcb->kprobe_saved_flags = kcb->kprobe_old_flags
= (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF));
- if (is_IF_modifier(p->ainsn.insn))
+ if (p->ainsn.if_modifier)
kcb->kprobe_saved_flags &= ~X86_EFLAGS_IF;
}
struct microcode_intel ***mc_saved;
mc_saved = (struct microcode_intel ***)
- __pa_symbol(&mc_saved_data->mc_saved);
+ __pa_nodebug(&mc_saved_data->mc_saved);
for (i = 0; i < mc_saved_data->mc_saved_count; i++) {
struct microcode_intel *p;
p = *(struct microcode_intel **)
- __pa(mc_saved_data->mc_saved + i);
- mc_saved_tmp[i] = (struct microcode_intel *)__pa(p);
+ __pa_nodebug(mc_saved_data->mc_saved + i);
+ mc_saved_tmp[i] = (struct microcode_intel *)__pa_nodebug(p);
}
}
#endif
struct cpio_data cd;
long offset = 0;
#ifdef CONFIG_X86_32
- char *p = (char *)__pa_symbol(ucode_name);
+ char *p = (char *)__pa_nodebug(ucode_name);
#else
char *p = ucode_name;
#endif
if (mc_intel == NULL)
return;
- delay_ucode_info_p = (int *)__pa_symbol(&delay_ucode_info);
- current_mc_date_p = (int *)__pa_symbol(¤t_mc_date);
+ delay_ucode_info_p = (int *)__pa_nodebug(&delay_ucode_info);
+ current_mc_date_p = (int *)__pa_nodebug(¤t_mc_date);
*delay_ucode_info_p = 1;
*current_mc_date_p = mc_intel->hdr.date;
}
#endif
-static int apply_microcode_early(struct mc_saved_data *mc_saved_data,
- struct ucode_cpu_info *uci)
+static int __cpuinit apply_microcode_early(struct mc_saved_data *mc_saved_data,
+ struct ucode_cpu_info *uci)
{
struct microcode_intel *mc_intel;
unsigned int val[2];
#ifdef CONFIG_X86_32
struct boot_params *boot_params_p;
- boot_params_p = (struct boot_params *)__pa_symbol(&boot_params);
+ boot_params_p = (struct boot_params *)__pa_nodebug(&boot_params);
ramdisk_image = boot_params_p->hdr.ramdisk_image;
ramdisk_size = boot_params_p->hdr.ramdisk_size;
initrd_start_early = ramdisk_image;
initrd_end_early = initrd_start_early + ramdisk_size;
_load_ucode_intel_bsp(
- (struct mc_saved_data *)__pa_symbol(&mc_saved_data),
- (unsigned long *)__pa_symbol(&mc_saved_in_initrd),
+ (struct mc_saved_data *)__pa_nodebug(&mc_saved_data),
+ (unsigned long *)__pa_nodebug(&mc_saved_in_initrd),
initrd_start_early, initrd_end_early, &uci);
#else
ramdisk_image = boot_params.hdr.ramdisk_image;
unsigned long *initrd_start_p;
mc_saved_in_initrd_p =
- (unsigned long *)__pa_symbol(mc_saved_in_initrd);
- mc_saved_data_p = (struct mc_saved_data *)__pa_symbol(&mc_saved_data);
- initrd_start_p = (unsigned long *)__pa_symbol(&initrd_start);
- initrd_start_addr = (unsigned long)__pa_symbol(*initrd_start_p);
+ (unsigned long *)__pa_nodebug(mc_saved_in_initrd);
+ mc_saved_data_p = (struct mc_saved_data *)__pa_nodebug(&mc_saved_data);
+ initrd_start_p = (unsigned long *)__pa_nodebug(&initrd_start);
+ initrd_start_addr = (unsigned long)__pa_nodebug(*initrd_start_p);
#else
mc_saved_data_p = &mc_saved_data;
mc_saved_in_initrd_p = mc_saved_in_initrd;
if (!pv_eoi_enabled(vcpu))
return 0;
return kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.pv_eoi.data,
- addr);
+ addr, sizeof(u8));
}
void kvm_lapic_init(void)
unsigned long flags, this_tsc_khz;
struct kvm_vcpu_arch *vcpu = &v->arch;
struct kvm_arch *ka = &v->kvm->arch;
- void *shared_kaddr;
s64 kernel_ns, max_kernel_ns;
u64 tsc_timestamp, host_tsc;
- struct pvclock_vcpu_time_info *guest_hv_clock;
+ struct pvclock_vcpu_time_info guest_hv_clock;
u8 pvclock_flags;
bool use_master_clock;
kernel_ns = 0;
host_tsc = 0;
- /* Keep irq disabled to prevent changes to the clock */
- local_irq_save(flags);
- this_tsc_khz = __get_cpu_var(cpu_tsc_khz);
- if (unlikely(this_tsc_khz == 0)) {
- local_irq_restore(flags);
- kvm_make_request(KVM_REQ_CLOCK_UPDATE, v);
- return 1;
- }
-
/*
* If the host uses TSC clock, then passthrough TSC as stable
* to the guest.
kernel_ns = ka->master_kernel_ns;
}
spin_unlock(&ka->pvclock_gtod_sync_lock);
+
+ /* Keep irq disabled to prevent changes to the clock */
+ local_irq_save(flags);
+ this_tsc_khz = __get_cpu_var(cpu_tsc_khz);
+ if (unlikely(this_tsc_khz == 0)) {
+ local_irq_restore(flags);
+ kvm_make_request(KVM_REQ_CLOCK_UPDATE, v);
+ return 1;
+ }
if (!use_master_clock) {
host_tsc = native_read_tsc();
kernel_ns = get_kernel_ns();
local_irq_restore(flags);
- if (!vcpu->time_page)
+ if (!vcpu->pv_time_enabled)
return 0;
/*
*/
vcpu->hv_clock.version += 2;
- shared_kaddr = kmap_atomic(vcpu->time_page);
-
- guest_hv_clock = shared_kaddr + vcpu->time_offset;
+ if (unlikely(kvm_read_guest_cached(v->kvm, &vcpu->pv_time,
+ &guest_hv_clock, sizeof(guest_hv_clock))))
+ return 0;
/* retain PVCLOCK_GUEST_STOPPED if set in guest copy */
- pvclock_flags = (guest_hv_clock->flags & PVCLOCK_GUEST_STOPPED);
+ pvclock_flags = (guest_hv_clock.flags & PVCLOCK_GUEST_STOPPED);
if (vcpu->pvclock_set_guest_stopped_request) {
pvclock_flags |= PVCLOCK_GUEST_STOPPED;
vcpu->hv_clock.flags = pvclock_flags;
- memcpy(shared_kaddr + vcpu->time_offset, &vcpu->hv_clock,
- sizeof(vcpu->hv_clock));
-
- kunmap_atomic(shared_kaddr);
-
- mark_page_dirty(v->kvm, vcpu->time >> PAGE_SHIFT);
+ kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
+ &vcpu->hv_clock,
+ sizeof(vcpu->hv_clock));
return 0;
}
return 0;
}
- if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.apf.data, gpa))
+ if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.apf.data, gpa,
+ sizeof(u32)))
return 1;
vcpu->arch.apf.send_user_only = !(data & KVM_ASYNC_PF_SEND_ALWAYS);
static void kvmclock_reset(struct kvm_vcpu *vcpu)
{
- if (vcpu->arch.time_page) {
- kvm_release_page_dirty(vcpu->arch.time_page);
- vcpu->arch.time_page = NULL;
- }
+ vcpu->arch.pv_time_enabled = false;
}
static void accumulate_steal_time(struct kvm_vcpu *vcpu)
break;
case MSR_KVM_SYSTEM_TIME_NEW:
case MSR_KVM_SYSTEM_TIME: {
+ u64 gpa_offset;
kvmclock_reset(vcpu);
vcpu->arch.time = data;
if (!(data & 1))
break;
- /* ...but clean it before doing the actual write */
- vcpu->arch.time_offset = data & ~(PAGE_MASK | 1);
-
- vcpu->arch.time_page =
- gfn_to_page(vcpu->kvm, data >> PAGE_SHIFT);
+ gpa_offset = data & ~(PAGE_MASK | 1);
- if (is_error_page(vcpu->arch.time_page))
- vcpu->arch.time_page = NULL;
+ if (kvm_gfn_to_hva_cache_init(vcpu->kvm,
+ &vcpu->arch.pv_time, data & ~1ULL,
+ sizeof(struct pvclock_vcpu_time_info)))
+ vcpu->arch.pv_time_enabled = false;
+ else
+ vcpu->arch.pv_time_enabled = true;
break;
}
return 1;
if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.st.stime,
- data & KVM_STEAL_VALID_BITS))
+ data & KVM_STEAL_VALID_BITS,
+ sizeof(struct kvm_steal_time)))
return 1;
vcpu->arch.st.msr_val = data;
*/
static int kvm_set_guest_paused(struct kvm_vcpu *vcpu)
{
- if (!vcpu->arch.time_page)
+ if (!vcpu->arch.pv_time_enabled)
return -EINVAL;
vcpu->arch.pvclock_set_guest_stopped_request = true;
kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu);
goto fail_free_wbinvd_dirty_mask;
vcpu->arch.ia32_tsc_adjust_msr = 0x0;
+ vcpu->arch.pv_time_enabled = false;
kvm_async_pf_hash_reset(vcpu);
kvm_pmu_init(vcpu);
char c;
unsigned zero_len;
- for (; len; --len) {
+ for (; len; --len, to++) {
if (__get_user_nocheck(c, from++, sizeof(char)))
break;
- if (__put_user_nocheck(c, to++, sizeof(char)))
+ if (__put_user_nocheck(c, to, sizeof(char)))
break;
}
#include <linux/suspend.h>
#include <linux/export.h>
#include <linux/smp.h>
+#include <linux/perf_event.h>
#include <asm/pgtable.h>
#include <asm/proto.h>
do_fpu_end();
x86_platform.restore_sched_clock_state();
mtrr_bp_restore();
+ perf_restore_debug_store();
}
/* Needed by apm.c */
__xen_write_cr3(true, cr3);
xen_mc_issue(PARAVIRT_LAZY_CPU); /* interrupts restored */
-
- pv_mmu_ops.write_cr3 = &xen_write_cr3;
}
#endif
#endif
#ifdef CONFIG_X86_64
+ pv_mmu_ops.write_cr3 = &xen_write_cr3;
SetPagePinned(virt_to_page(level3_user_vsyscall));
#endif
xen_mark_init_mm_pinned();
select HAVE_IDE
select GENERIC_ATOMIC64
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
* copied from blk_rq_pos(rq).
*/
if (error_sector)
- *error_sector = bio->bi_sector;
+ *error_sector = bio->bi_sector;
if (!bio_flagged(bio, BIO_UPTODATE))
ret = -EIO;
hd_struct_put(part);
}
+EXPORT_SYMBOL(delete_partition);
static ssize_t whole_disk_show(struct device *dev,
struct device_attribute *attr, char *buf)
source "drivers/ipack/Kconfig"
+source "drivers/reset/Kconfig"
+
endmenu
# regulators early, since some subsystems rely on them to initialize
obj-$(CONFIG_REGULATOR) += regulator/
+# reset controllers early, since gpu drivers might rely on them to initialize
+obj-$(CONFIG_RESET_CONTROLLER) += reset/
+
# tty/ comes before char/ so that the VT console is the boot-time
# default.
obj-y += tty/
config ACPI_BGRT
bool "Boottime Graphics Resource Table support"
- depends on EFI
+ depends on EFI && X86
help
This driver adds support for exposing the ACPI Boottime Graphics
Resource Table, which allows the operating system to obtain
acpi_handle handle;
acpi_status status;
- handle = ACPI_HANDLE(&adapter->dev);
+ handle = ACPI_HANDLE(adapter->dev.parent);
if (!handle)
return;
return rc;
data_len = estatus->data_length;
gdata = (struct acpi_hest_generic_data *)(estatus + 1);
- while (data_len > sizeof(*gdata)) {
+ while (data_len >= sizeof(*gdata)) {
gedata_len = gdata->error_data_length;
if (gedata_len > data_len - sizeof(*gdata))
return -EINVAL;
struct acpi_pci_root *root;
struct acpi_pci_driver *driver;
u32 flags, base_flags;
- bool is_osc_granted = false;
root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
if (!root)
flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
acpi_pci_osc_support(root, flags);
+ /*
+ * TBD: Need PCI interface for enumeration/configuration of roots.
+ */
+
+ mutex_lock(&acpi_pci_root_lock);
+ list_add_tail(&root->node, &acpi_pci_roots);
+ mutex_unlock(&acpi_pci_root_lock);
+
+ /*
+ * Scan the Root Bridge
+ * --------------------
+ * Must do this prior to any attempt to bind the root device, as the
+ * PCI namespace does not get created until this call is made (and
+ * thus the root bridge's pci_dev does not exist).
+ */
+ root->bus = pci_acpi_scan_root(root);
+ if (!root->bus) {
+ printk(KERN_ERR PREFIX
+ "Bus %04x:%02x not present in PCI namespace\n",
+ root->segment, (unsigned int)root->secondary.start);
+ result = -ENODEV;
+ goto out_del_root;
+ }
+
/* Indicate support for various _OSC capabilities. */
if (pci_ext_cfg_avail())
flags |= OSC_EXT_PCI_CONFIG_SUPPORT;
flags = base_flags;
}
}
+
if (!pcie_ports_disabled
&& (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) {
flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL
status = acpi_pci_osc_control_set(device->handle, &flags,
OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
if (ACPI_SUCCESS(status)) {
- is_osc_granted = true;
dev_info(&device->dev,
"ACPI _OSC control (0x%02x) granted\n", flags);
+ if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
+ /*
+ * We have ASPM control, but the FADT indicates
+ * that it's unsupported. Clear it.
+ */
+ pcie_clear_aspm(root->bus);
+ }
} else {
- is_osc_granted = false;
dev_info(&device->dev,
"ACPI _OSC request failed (%s), "
"returned control mask: 0x%02x\n",
acpi_format_exception(status), flags);
+ pr_info("ACPI _OSC control for PCIe not granted, "
+ "disabling ASPM\n");
+ pcie_no_aspm();
}
} else {
dev_info(&device->dev,
- "Unable to request _OSC control "
- "(_OSC support mask: 0x%02x)\n", flags);
- }
-
- /*
- * TBD: Need PCI interface for enumeration/configuration of roots.
- */
-
- mutex_lock(&acpi_pci_root_lock);
- list_add_tail(&root->node, &acpi_pci_roots);
- mutex_unlock(&acpi_pci_root_lock);
-
- /*
- * Scan the Root Bridge
- * --------------------
- * Must do this prior to any attempt to bind the root device, as the
- * PCI namespace does not get created until this call is made (and
- * thus the root bridge's pci_dev does not exist).
- */
- root->bus = pci_acpi_scan_root(root);
- if (!root->bus) {
- printk(KERN_ERR PREFIX
- "Bus %04x:%02x not present in PCI namespace\n",
- root->segment, (unsigned int)root->secondary.start);
- result = -ENODEV;
- goto out_del_root;
- }
-
- /* ASPM setting */
- if (is_osc_granted) {
- if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM)
- pcie_clear_aspm(root->bus);
- } else {
- pr_info("ACPI _OSC control for PCIe not granted, "
- "disabling ASPM\n");
- pcie_no_aspm();
+ "Unable to request _OSC control "
+ "(_OSC support mask: 0x%02x)\n", flags);
}
pci_acpi_add_bus_pm_notifier(device, root->bus);
static void handle_root_bridge_removal(struct acpi_device *device)
{
+ acpi_status status;
struct acpi_eject_event *ej_event;
ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
ej_event->device = device;
ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
- acpi_bus_hot_remove_device(ej_event);
+ status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device, ej_event);
+ if (ACPI_FAILURE(status))
+ kfree(ej_event);
}
static void _handle_hotplug_event_root(struct work_struct *work)
handle = hp_work->handle;
type = hp_work->type;
- root = acpi_pci_find_root(handle);
+ acpi_scan_lock_acquire();
+ root = acpi_pci_find_root(handle);
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
switch (type) {
break;
}
+ acpi_scan_lock_release();
kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
kfree(buffer.pointer);
}
static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
-static struct acpi_processor_cx *acpi_cstate[CPUIDLE_STATE_MAX];
+static DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX],
+ acpi_cstate);
static int disabled_by_idle_boot_param(void)
{
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
pr = __this_cpu_read(processors);
*/
static int acpi_idle_play_dead(struct cpuidle_device *dev, int index)
{
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
ACPI_FLUSH_CPU_CACHE();
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
pr = __this_cpu_read(processors);
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
pr = __this_cpu_read(processors);
!(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
continue;
#endif
- acpi_cstate[count] = cx;
+ per_cpu(acpi_cstate[count], dev->cpu) = cx;
count++;
if (count == CPUIDLE_STATE_MAX)
return result;
}
-static int acpi_processor_get_performance_info(struct acpi_processor *pr)
+int acpi_processor_get_performance_info(struct acpi_processor *pr)
{
int result = 0;
acpi_status status = AE_OK;
#endif
return result;
}
-
+EXPORT_SYMBOL_GPL(acpi_processor_get_performance_info);
int acpi_processor_notify_smm(struct module *calling_module)
{
acpi_status status;
},
{
.callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-FW21M",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
.ident = "Sony Vaio VPCEB17FX",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
EXPORT_SYMBOL(tegra_ahb_enable_smmu);
#endif
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
static int tegra_ahb_suspend(struct device *dev)
{
int i;
option libata.noacpi=1
config SATA_ZPODD
- bool "SATA Zero Power ODD Support"
+ bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
depends on ATA_ACPI
default n
help
- This option adds support for SATA ZPODD. It requires both
- ODD and the platform support, and if enabled, will automatically
- power on/off the ODD when certain condition is satisfied. This
- does not impact user's experience of the ODD, only power is saved
- when ODD is not in use(i.e. no disc inside).
+ This option adds support for SATA Zero Power Optical Disc
+ Drive (ZPODD). It requires both the ODD and the platform
+ support, and if enabled, will automatically power on/off the
+ ODD when certain condition is satisfied. This does not impact
+ end user's experience of the ODD, only power is saved when
+ the ODD is not in use (i.e. no disc inside).
If unsure, say N.
{ PCI_VDEVICE(INTEL, 0x1f37), board_ahci }, /* Avoton RAID */
{ PCI_VDEVICE(INTEL, 0x1f3e), board_ahci }, /* Avoton RAID */
{ PCI_VDEVICE(INTEL, 0x1f3f), board_ahci }, /* Avoton RAID */
+ { PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */
+ { PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */
{ PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */
{ PCI_VDEVICE(INTEL, 0x8d04), board_ahci }, /* Wellsburg RAID */
{ PCI_VDEVICE(INTEL, 0x8d06), board_ahci }, /* Wellsburg RAID */
static int prefer_ms_hyperv = 1;
module_param(prefer_ms_hyperv, int, 0);
+MODULE_PARM_DESC(prefer_ms_hyperv,
+ "Prefer Hyper-V paravirtualization drivers instead of ATA, "
+ "0 - Use ATA drivers, "
+ "1 (Default) - Use the paravirtualization drivers.");
static void piix_ignore_devices_quirk(struct ata_host *host)
{
handle = ata_dev_acpi_handle(dev);
if (handle)
- acpi_dev_pm_remove_dependent(handle, &sdev->sdev_gendev);
+ acpi_dev_pm_add_dependent(handle, &sdev->sdev_gendev);
}
static void ata_acpi_unregister_power_resource(struct ata_device *dev)
},
};
-static int __init pata_s3c_init(void)
-{
- return platform_driver_probe(&pata_s3c_driver, pata_s3c_probe);
-}
-
-static void __exit pata_s3c_exit(void)
-{
- platform_driver_unregister(&pata_s3c_driver);
-}
-
-module_init(pata_s3c_init);
-module_exit(pata_s3c_exit);
+module_platform_driver_probe(pata_s3c_driver, pata_s3c_probe);
MODULE_AUTHOR("Abhilash Kesavan, <a.kesavan@samsung.com>");
MODULE_DESCRIPTION("low-level driver for Samsung PATA controller");
if (hcr_base)
iounmap(hcr_base);
- if (host_priv)
- kfree(host_priv);
+ kfree(host_priv);
return retval;
}
#include "power.h"
static DEFINE_MUTEX(dev_pm_qos_mtx);
+static DEFINE_MUTEX(dev_pm_qos_sysfs_mtx);
static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
struct pm_qos_constraints *c;
struct pm_qos_flags *f;
- mutex_lock(&dev_pm_qos_mtx);
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
/*
* If the device's PM QoS resume latency limit or PM QoS flags have been
* exposed to user space, they have to be hidden at this point.
*/
+ pm_qos_sysfs_remove_latency(dev);
+ pm_qos_sysfs_remove_flags(dev);
+
+ mutex_lock(&dev_pm_qos_mtx);
+
__dev_pm_qos_hide_latency_limit(dev);
__dev_pm_qos_hide_flags(dev);
out:
mutex_unlock(&dev_pm_qos_mtx);
+
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
}
/**
kfree(req);
}
+static void dev_pm_qos_drop_user_request(struct device *dev,
+ enum dev_pm_qos_req_type type)
+{
+ mutex_lock(&dev_pm_qos_mtx);
+ __dev_pm_qos_drop_user_request(dev, type);
+ mutex_unlock(&dev_pm_qos_mtx);
+}
+
/**
* dev_pm_qos_expose_latency_limit - Expose PM QoS latency limit to user space.
* @dev: Device whose PM QoS latency limit is to be exposed to user space.
return ret;
}
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
mutex_lock(&dev_pm_qos_mtx);
if (IS_ERR_OR_NULL(dev->power.qos))
if (ret < 0) {
__dev_pm_qos_remove_request(req);
kfree(req);
+ mutex_unlock(&dev_pm_qos_mtx);
goto out;
}
-
dev->power.qos->latency_req = req;
+
+ mutex_unlock(&dev_pm_qos_mtx);
+
ret = pm_qos_sysfs_add_latency(dev);
if (ret)
- __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
+ dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
out:
- mutex_unlock(&dev_pm_qos_mtx);
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
return ret;
}
EXPORT_SYMBOL_GPL(dev_pm_qos_expose_latency_limit);
static void __dev_pm_qos_hide_latency_limit(struct device *dev)
{
- if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->latency_req) {
- pm_qos_sysfs_remove_latency(dev);
+ if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->latency_req)
__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
- }
}
/**
*/
void dev_pm_qos_hide_latency_limit(struct device *dev)
{
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
+ pm_qos_sysfs_remove_latency(dev);
+
mutex_lock(&dev_pm_qos_mtx);
__dev_pm_qos_hide_latency_limit(dev);
mutex_unlock(&dev_pm_qos_mtx);
+
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
}
EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit);
}
pm_runtime_get_sync(dev);
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
mutex_lock(&dev_pm_qos_mtx);
if (IS_ERR_OR_NULL(dev->power.qos))
if (ret < 0) {
__dev_pm_qos_remove_request(req);
kfree(req);
+ mutex_unlock(&dev_pm_qos_mtx);
goto out;
}
-
dev->power.qos->flags_req = req;
+
+ mutex_unlock(&dev_pm_qos_mtx);
+
ret = pm_qos_sysfs_add_flags(dev);
if (ret)
- __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+ dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
out:
- mutex_unlock(&dev_pm_qos_mtx);
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
pm_runtime_put(dev);
return ret;
}
static void __dev_pm_qos_hide_flags(struct device *dev)
{
- if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->flags_req) {
- pm_qos_sysfs_remove_flags(dev);
+ if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->flags_req)
__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
- }
}
/**
void dev_pm_qos_hide_flags(struct device *dev)
{
pm_runtime_get_sync(dev);
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
+ pm_qos_sysfs_remove_flags(dev);
+
mutex_lock(&dev_pm_qos_mtx);
__dev_pm_qos_hide_flags(dev);
mutex_unlock(&dev_pm_qos_mtx);
+
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
pm_runtime_put(dev);
}
EXPORT_SYMBOL_GPL(dev_pm_qos_hide_flags);
base = 0;
if (max < rbnode->base_reg + rbnode->blklen)
- end = rbnode->base_reg + rbnode->blklen - max;
+ end = max - rbnode->base_reg + 1;
else
end = rbnode->blklen;
}
}
+ regmap_debugfs_init(map, config->name);
+
ret = regcache_init(map, config);
if (ret != 0)
goto err_range;
- regmap_debugfs_init(map, config->name);
-
/* Add a devres resource for dev_get_regmap() */
m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL);
if (!m) {
unsigned int ival;
int val_bytes = map->format.val_bytes;
for (i = 0; i < val_len / val_bytes; i++) {
- memcpy(map->work_buf, val + (i * val_bytes), val_bytes);
- ival = map->format.parse_val(map->work_buf);
+ ival = map->format.parse_val(val + (i * val_bytes));
ret = regcache_write(map, reg + (i * map->reg_stride),
ival);
if (ret) {
kfree(async->work_buf);
kfree(async);
}
+
+ return ret;
}
trace_regmap_hw_write_start(map->dev, reg,
If unsure, say N.
config BLK_DEV_RSXX
- tristate "RamSam PCIe Flash SSD Device Driver"
+ tristate "IBM FlashSystem 70/80 PCIe SSD Device Driver"
depends on PCI
help
Device driver for IBM's high speed PCIe SSD
- storage devices: RamSan-70 and RamSan-80.
+ storage devices: FlashSystem-70 and FlashSystem-80.
To compile this driver as a module, choose M here: the
module will be called rsxx.
{
struct sk_buff *skb;
- skb = alloc_skb(len, GFP_ATOMIC);
+ skb = alloc_skb(len + MAX_HEADER, GFP_ATOMIC);
if (skb) {
+ skb_reserve(skb, MAX_HEADER);
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
skb->protocol = __constant_htons(ETH_P_AOE);
if (rc)
return rc;
h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
- cfg_base_addr_index) + cfg_offset, sizeof(h->cfgtable));
+ cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
if (!h->cfgtable)
return -ENOMEM;
rc = write_driver_ver_to_cfgtable(h->cfgtable);
lo->lo_flags |= LO_FLAGS_PARTSCAN;
if (lo->lo_flags & LO_FLAGS_PARTSCAN)
ioctl_by_bdev(bdev, BLKRRPART, 0);
+
+ /* Grab the block_device to prevent its destruction after we
+ * put /dev/loopXX inode. Later in loop_clr_fd() we bdput(bdev).
+ */
+ bdgrab(bdev);
return 0;
out_clr:
memset(lo->lo_encrypt_key, 0, LO_KEY_SIZE);
memset(lo->lo_crypt_name, 0, LO_NAME_SIZE);
memset(lo->lo_file_name, 0, LO_NAME_SIZE);
- if (bdev)
+ if (bdev) {
+ bdput(bdev);
invalidate_bdev(bdev);
+ }
set_capacity(lo->lo_disk, 0);
loop_sysfs_exit(lo);
if (bdev) {
lo->lo_state = Lo_unbound;
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
- if (lo->lo_flags & LO_FLAGS_PARTSCAN && bdev)
- ioctl_by_bdev(bdev, BLKRRPART, 0);
lo->lo_flags = 0;
if (!part_shift)
lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN;
mutex_unlock(&lo->lo_ctl_mutex);
+
+ /*
+ * Remove all partitions, since BLKRRPART won't remove user
+ * added partitions when max_part=0
+ */
+ if (bdev) {
+ struct disk_part_iter piter;
+ struct hd_struct *part;
+
+ mutex_lock_nested(&bdev->bd_mutex, 1);
+ invalidate_partition(bdev->bd_disk, 0);
+ disk_part_iter_init(&piter, bdev->bd_disk,
+ DISK_PITER_INCL_EMPTY);
+ while ((part = disk_part_iter_next(&piter)))
+ delete_partition(bdev->bd_disk, part->partno);
+ disk_part_iter_exit(&piter);
+ mutex_unlock(&bdev->bd_mutex);
+ }
+
/*
* Need not hold lo_ctl_mutex to fput backing file.
* Calling fput holding lo_ctl_mutex triggers a circular
goto out_free_dev;
i = err;
+ err = -ENOMEM;
lo->lo_queue = blk_alloc_queue(GFP_KERNEL);
if (!lo->lo_queue)
goto out_free_dev;
gpio_direction_output(host->rst, 1);
/* reset out pin */
- if (!(prv_data->dev_attr & MG_DEV_MASK))
+ if (!(prv_data->dev_attr & MG_DEV_MASK)) {
+ err = -EINVAL;
goto probe_err_3a;
+ }
if (prv_data->dev_attr != MG_BOOT_DEV) {
rsc = platform_get_resource_byname(plat_dev, IORESOURCE_IO,
dd->isr_workq = create_workqueue(dd->workq_name);
if (!dd->isr_workq) {
dev_warn(&pdev->dev, "Can't create wq %d\n", dd->instance);
+ rv = -ENOMEM;
goto block_initialize_err;
}
INIT_WORK(&dd->work[7].work, mtip_workq_sdbf7);
pci_set_master(pdev);
- if (pci_enable_msi(pdev)) {
+ rv = pci_enable_msi(pdev);
+ if (rv) {
dev_warn(&pdev->dev,
"Unable to enable MSI interrupt.\n");
goto block_initialize_err;
BUILD_BUG_ON(sizeof(struct nvme_id_ctrl) != 4096);
BUILD_BUG_ON(sizeof(struct nvme_id_ns) != 4096);
BUILD_BUG_ON(sizeof(struct nvme_lba_range_type) != 64);
+ BUILD_BUG_ON(sizeof(struct nvme_smart_log) != 512);
}
typedef void (*nvme_completion_fn)(struct nvme_dev *, void *,
*fn = special_completion;
return CMD_CTX_INVALID;
}
- *fn = info[cmdid].fn;
+ if (fn)
+ *fn = info[cmdid].fn;
ctx = info[cmdid].ctx;
info[cmdid].fn = special_completion;
info[cmdid].ctx = CMD_CTX_COMPLETED;
iod->offset = offsetof(struct nvme_iod, sg[nseg]);
iod->npages = -1;
iod->length = nbytes;
+ iod->nents = 0;
}
return iod;
struct bio *bio = iod->private;
u16 status = le16_to_cpup(&cqe->status) >> 1;
- dma_unmap_sg(&dev->pci_dev->dev, iod->sg, iod->nents,
+ if (iod->nents)
+ dma_unmap_sg(&dev->pci_dev->dev, iod->sg, iod->nents,
bio_data_dir(bio) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
nvme_free_iod(dev, iod);
if (status) {
result = nvme_map_bio(nvmeq->q_dmadev, iod, bio, dma_dir, psegs);
if (result < 0)
- goto free_iod;
+ goto free_cmdid;
length = result;
cmnd->rw.command_id = cmdid;
return 0;
+ free_cmdid:
+ free_cmdid(nvmeq, cmdid, NULL);
free_iod:
nvme_free_iod(nvmeq->dev, iod);
nomem:
return nvme_submit_admin_cmd(dev, &c, NULL);
}
-static int nvme_get_features(struct nvme_dev *dev, unsigned fid,
- unsigned nsid, dma_addr_t dma_addr)
+static int nvme_get_features(struct nvme_dev *dev, unsigned fid, unsigned nsid,
+ dma_addr_t dma_addr, u32 *result)
{
struct nvme_command c;
c.features.prp1 = cpu_to_le64(dma_addr);
c.features.fid = cpu_to_le32(fid);
- return nvme_submit_admin_cmd(dev, &c, NULL);
+ return nvme_submit_admin_cmd(dev, &c, result);
}
static int nvme_set_features(struct nvme_dev *dev, unsigned fid,
spin_lock_irq(&nvmeq->q_lock);
nvme_cancel_ios(nvmeq, false);
+ while (bio_list_peek(&nvmeq->sq_cong)) {
+ struct bio *bio = bio_list_pop(&nvmeq->sq_cong);
+ bio_endio(bio, -EIO);
+ }
spin_unlock_irq(&nvmeq->q_lock);
irq_set_affinity_hint(vector, NULL);
if (length != cmd.data_len)
status = -ENOMEM;
else
- status = nvme_submit_admin_cmd(dev, &c, NULL);
+ status = nvme_submit_admin_cmd(dev, &c, &cmd.result);
if (cmd.data_len) {
nvme_unmap_user_pages(dev, cmd.opcode & 1, iod);
nvme_free_iod(dev, iod);
}
+
+ if (!status && copy_to_user(&ucmd->result, &cmd.result,
+ sizeof(cmd.result)))
+ status = -EFAULT;
+
return status;
}
continue;
res = nvme_get_features(dev, NVME_FEAT_LBA_RANGE, i,
- dma_addr + 4096);
+ dma_addr + 4096, NULL);
if (res)
- continue;
+ memset(mem + 4096, 0, 4096);
ns = nvme_alloc_ns(dev, i, mem, mem + 4096);
if (ns)
return atomic_read(&obj_request->done) != 0;
}
+static void
+rbd_img_obj_request_read_callback(struct rbd_obj_request *obj_request)
+{
+ dout("%s: obj %p img %p result %d %llu/%llu\n", __func__,
+ obj_request, obj_request->img_request, obj_request->result,
+ obj_request->xferred, obj_request->length);
+ /*
+ * ENOENT means a hole in the image. We zero-fill the
+ * entire length of the request. A short read also implies
+ * zero-fill to the end of the request. Either way we
+ * update the xferred count to indicate the whole request
+ * was satisfied.
+ */
+ BUG_ON(obj_request->type != OBJ_REQUEST_BIO);
+ if (obj_request->result == -ENOENT) {
+ zero_bio_chain(obj_request->bio_list, 0);
+ obj_request->result = 0;
+ obj_request->xferred = obj_request->length;
+ } else if (obj_request->xferred < obj_request->length &&
+ !obj_request->result) {
+ zero_bio_chain(obj_request->bio_list, obj_request->xferred);
+ obj_request->xferred = obj_request->length;
+ }
+ obj_request_done_set(obj_request);
+}
+
static void rbd_obj_request_complete(struct rbd_obj_request *obj_request)
{
dout("%s: obj %p cb %p\n", __func__, obj_request,
{
dout("%s: obj %p result %d %llu/%llu\n", __func__, obj_request,
obj_request->result, obj_request->xferred, obj_request->length);
- /*
- * ENOENT means a hole in the object. We zero-fill the
- * entire length of the request. A short read also implies
- * zero-fill to the end of the request. Either way we
- * update the xferred count to indicate the whole request
- * was satisfied.
- */
- if (obj_request->result == -ENOENT) {
- zero_bio_chain(obj_request->bio_list, 0);
- obj_request->result = 0;
- obj_request->xferred = obj_request->length;
- } else if (obj_request->xferred < obj_request->length &&
- !obj_request->result) {
- zero_bio_chain(obj_request->bio_list, obj_request->xferred);
- obj_request->xferred = obj_request->length;
- }
- obj_request_done_set(obj_request);
+ if (obj_request->img_request)
+ rbd_img_obj_request_read_callback(obj_request);
+ else
+ obj_request_done_set(obj_request);
}
static void rbd_osd_write_callback(struct rbd_obj_request *obj_request)
obj-$(CONFIG_BLK_DEV_RSXX) += rsxx.o
-rsxx-y := config.o core.o cregs.o dev.o dma.o
+rsxx-objs := config.o core.o cregs.o dev.o dma.o
#include "rsxx_priv.h"
#include "rsxx_cfg.h"
-static void initialize_config(void *config)
+static void initialize_config(struct rsxx_card_cfg *cfg)
{
- struct rsxx_card_cfg *cfg = config;
-
cfg->hdr.version = RSXX_CFG_VERSION;
cfg->data.block_size = RSXX_HW_BLK_SIZE;
cfg->data.stripe_size = RSXX_HW_BLK_SIZE;
- cfg->data.vendor_id = RSXX_VENDOR_ID_TMS_IBM;
+ cfg->data.vendor_id = RSXX_VENDOR_ID_IBM;
cfg->data.cache_order = (-1);
cfg->data.intr_coal.mode = RSXX_INTR_COAL_DISABLED;
cfg->data.intr_coal.count = 0;
} else {
dev_info(CARD_TO_DEV(card),
"Initializing card configuration.\n");
- initialize_config(card);
+ initialize_config(&card->config);
st = rsxx_save_config(card);
if (st)
return st;
#include <linux/reboot.h>
#include <linux/slab.h>
#include <linux/bitops.h>
+#include <linux/delay.h>
#include <linux/genhd.h>
#include <linux/idr.h>
#define NO_LEGACY 0
-MODULE_DESCRIPTION("IBM RamSan PCIe Flash SSD Device Driver");
-MODULE_AUTHOR("IBM <support@ramsan.com>");
+MODULE_DESCRIPTION("IBM FlashSystem 70/80 PCIe SSD Device Driver");
+MODULE_AUTHOR("Joshua Morris/Philip Kelleher, IBM");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRIVER_VERSION);
static DEFINE_SPINLOCK(rsxx_ida_lock);
/*----------------- Interrupt Control & Handling -------------------*/
+
+static void rsxx_mask_interrupts(struct rsxx_cardinfo *card)
+{
+ card->isr_mask = 0;
+ card->ier_mask = 0;
+}
+
static void __enable_intr(unsigned int *mask, unsigned int intr)
{
*mask |= intr;
*/
void rsxx_enable_ier(struct rsxx_cardinfo *card, unsigned int intr)
{
- if (unlikely(card->halt))
+ if (unlikely(card->halt) ||
+ unlikely(card->eeh_state))
return;
__enable_intr(&card->ier_mask, intr);
void rsxx_disable_ier(struct rsxx_cardinfo *card, unsigned int intr)
{
+ if (unlikely(card->eeh_state))
+ return;
+
__disable_intr(&card->ier_mask, intr);
iowrite32(card->ier_mask, card->regmap + IER);
}
void rsxx_enable_ier_and_isr(struct rsxx_cardinfo *card,
unsigned int intr)
{
- if (unlikely(card->halt))
+ if (unlikely(card->halt) ||
+ unlikely(card->eeh_state))
return;
__enable_intr(&card->isr_mask, intr);
void rsxx_disable_ier_and_isr(struct rsxx_cardinfo *card,
unsigned int intr)
{
+ if (unlikely(card->eeh_state))
+ return;
+
__disable_intr(&card->isr_mask, intr);
__disable_intr(&card->ier_mask, intr);
iowrite32(card->ier_mask, card->regmap + IER);
do {
reread_isr = 0;
+ if (unlikely(card->eeh_state))
+ break;
+
isr = ioread32(card->regmap + ISR);
if (isr == 0xffffffff) {
/*
}
/*----------------- Card Event Handler -------------------*/
-static char *rsxx_card_state_to_str(unsigned int state)
+static const char * const rsxx_card_state_to_str(unsigned int state)
{
- static char *state_strings[] = {
+ static const char * const state_strings[] = {
"Unknown", "Shutdown", "Starting", "Formatting",
"Uninitialized", "Good", "Shutting Down",
"Fault", "Read Only Fault", "dStroying"
return 0;
}
+static int rsxx_eeh_frozen(struct pci_dev *dev)
+{
+ struct rsxx_cardinfo *card = pci_get_drvdata(dev);
+ int i;
+ int st;
+
+ dev_warn(&dev->dev, "IBM FlashSystem PCI: preparing for slot reset.\n");
+
+ card->eeh_state = 1;
+ rsxx_mask_interrupts(card);
+
+ /*
+ * We need to guarantee that the write for eeh_state and masking
+ * interrupts does not become reordered. This will prevent a possible
+ * race condition with the EEH code.
+ */
+ wmb();
+
+ pci_disable_device(dev);
+
+ st = rsxx_eeh_save_issued_dmas(card);
+ if (st)
+ return st;
+
+ rsxx_eeh_save_issued_creg(card);
+
+ for (i = 0; i < card->n_targets; i++) {
+ if (card->ctrl[i].status.buf)
+ pci_free_consistent(card->dev, STATUS_BUFFER_SIZE8,
+ card->ctrl[i].status.buf,
+ card->ctrl[i].status.dma_addr);
+ if (card->ctrl[i].cmd.buf)
+ pci_free_consistent(card->dev, COMMAND_BUFFER_SIZE8,
+ card->ctrl[i].cmd.buf,
+ card->ctrl[i].cmd.dma_addr);
+ }
+
+ return 0;
+}
+
+static void rsxx_eeh_failure(struct pci_dev *dev)
+{
+ struct rsxx_cardinfo *card = pci_get_drvdata(dev);
+ int i;
+
+ dev_err(&dev->dev, "IBM FlashSystem PCI: disabling failed card.\n");
+
+ card->eeh_state = 1;
+
+ for (i = 0; i < card->n_targets; i++)
+ del_timer_sync(&card->ctrl[i].activity_timer);
+
+ rsxx_eeh_cancel_dmas(card);
+}
+
+static int rsxx_eeh_fifo_flush_poll(struct rsxx_cardinfo *card)
+{
+ unsigned int status;
+ int iter = 0;
+
+ /* We need to wait for the hardware to reset */
+ while (iter++ < 10) {
+ status = ioread32(card->regmap + PCI_RECONFIG);
+
+ if (status & RSXX_FLUSH_BUSY) {
+ ssleep(1);
+ continue;
+ }
+
+ if (status & RSXX_FLUSH_TIMEOUT)
+ dev_warn(CARD_TO_DEV(card), "HW: flash controller timeout\n");
+ return 0;
+ }
+
+ /* Hardware failed resetting itself. */
+ return -1;
+}
+
+static pci_ers_result_t rsxx_error_detected(struct pci_dev *dev,
+ enum pci_channel_state error)
+{
+ int st;
+
+ if (dev->revision < RSXX_EEH_SUPPORT)
+ return PCI_ERS_RESULT_NONE;
+
+ if (error == pci_channel_io_perm_failure) {
+ rsxx_eeh_failure(dev);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ st = rsxx_eeh_frozen(dev);
+ if (st) {
+ dev_err(&dev->dev, "Slot reset setup failed\n");
+ rsxx_eeh_failure(dev);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t rsxx_slot_reset(struct pci_dev *dev)
+{
+ struct rsxx_cardinfo *card = pci_get_drvdata(dev);
+ unsigned long flags;
+ int i;
+ int st;
+
+ dev_warn(&dev->dev,
+ "IBM FlashSystem PCI: recovering from slot reset.\n");
+
+ st = pci_enable_device(dev);
+ if (st)
+ goto failed_hw_setup;
+
+ pci_set_master(dev);
+
+ st = rsxx_eeh_fifo_flush_poll(card);
+ if (st)
+ goto failed_hw_setup;
+
+ rsxx_dma_queue_reset(card);
+
+ for (i = 0; i < card->n_targets; i++) {
+ st = rsxx_hw_buffers_init(dev, &card->ctrl[i]);
+ if (st)
+ goto failed_hw_buffers_init;
+ }
+
+ if (card->config_valid)
+ rsxx_dma_configure(card);
+
+ /* Clears the ISR register from spurious interrupts */
+ st = ioread32(card->regmap + ISR);
+
+ card->eeh_state = 0;
+
+ st = rsxx_eeh_remap_dmas(card);
+ if (st)
+ goto failed_remap_dmas;
+
+ spin_lock_irqsave(&card->irq_lock, flags);
+ if (card->n_targets & RSXX_MAX_TARGETS)
+ rsxx_enable_ier_and_isr(card, CR_INTR_ALL_G);
+ else
+ rsxx_enable_ier_and_isr(card, CR_INTR_ALL_C);
+ spin_unlock_irqrestore(&card->irq_lock, flags);
+
+ rsxx_kick_creg_queue(card);
+
+ for (i = 0; i < card->n_targets; i++) {
+ spin_lock(&card->ctrl[i].queue_lock);
+ if (list_empty(&card->ctrl[i].queue)) {
+ spin_unlock(&card->ctrl[i].queue_lock);
+ continue;
+ }
+ spin_unlock(&card->ctrl[i].queue_lock);
+
+ queue_work(card->ctrl[i].issue_wq,
+ &card->ctrl[i].issue_dma_work);
+ }
+
+ dev_info(&dev->dev, "IBM FlashSystem PCI: recovery complete.\n");
+
+ return PCI_ERS_RESULT_RECOVERED;
+
+failed_hw_buffers_init:
+failed_remap_dmas:
+ for (i = 0; i < card->n_targets; i++) {
+ if (card->ctrl[i].status.buf)
+ pci_free_consistent(card->dev,
+ STATUS_BUFFER_SIZE8,
+ card->ctrl[i].status.buf,
+ card->ctrl[i].status.dma_addr);
+ if (card->ctrl[i].cmd.buf)
+ pci_free_consistent(card->dev,
+ COMMAND_BUFFER_SIZE8,
+ card->ctrl[i].cmd.buf,
+ card->ctrl[i].cmd.dma_addr);
+ }
+failed_hw_setup:
+ rsxx_eeh_failure(dev);
+ return PCI_ERS_RESULT_DISCONNECT;
+
+}
+
/*----------------- Driver Initialization & Setup -------------------*/
/* Returns: 0 if the driver is compatible with the device
-1 if the driver is NOT compatible with the device */
spin_lock_init(&card->irq_lock);
card->halt = 0;
+ card->eeh_state = 0;
spin_lock_irq(&card->irq_lock);
rsxx_disable_ier_and_isr(card, CR_INTR_ALL);
rsxx_disable_ier_and_isr(card, CR_INTR_EVENT);
spin_unlock_irqrestore(&card->irq_lock, flags);
- /* Prevent work_structs from re-queuing themselves. */
- card->halt = 1;
-
cancel_work_sync(&card->event_work);
rsxx_destroy_dev(card);
spin_lock_irqsave(&card->irq_lock, flags);
rsxx_disable_ier_and_isr(card, CR_INTR_ALL);
spin_unlock_irqrestore(&card->irq_lock, flags);
+
+ /* Prevent work_structs from re-queuing themselves. */
+ card->halt = 1;
+
free_irq(dev->irq, card);
if (!force_legacy)
card_shutdown(card);
}
+static const struct pci_error_handlers rsxx_err_handler = {
+ .error_detected = rsxx_error_detected,
+ .slot_reset = rsxx_slot_reset,
+};
+
static DEFINE_PCI_DEVICE_TABLE(rsxx_pci_ids) = {
- {PCI_DEVICE(PCI_VENDOR_ID_TMS_IBM, PCI_DEVICE_ID_RS70_FLASH)},
- {PCI_DEVICE(PCI_VENDOR_ID_TMS_IBM, PCI_DEVICE_ID_RS70D_FLASH)},
- {PCI_DEVICE(PCI_VENDOR_ID_TMS_IBM, PCI_DEVICE_ID_RS80_FLASH)},
- {PCI_DEVICE(PCI_VENDOR_ID_TMS_IBM, PCI_DEVICE_ID_RS81_FLASH)},
+ {PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_FS70_FLASH)},
+ {PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_FS80_FLASH)},
{0,},
};
.remove = rsxx_pci_remove,
.suspend = rsxx_pci_suspend,
.shutdown = rsxx_pci_shutdown,
+ .err_handler = &rsxx_err_handler,
};
static int __init rsxx_core_init(void)
#error Unknown endianess!!! Aborting...
#endif
-static void copy_to_creg_data(struct rsxx_cardinfo *card,
+static int copy_to_creg_data(struct rsxx_cardinfo *card,
int cnt8,
void *buf,
unsigned int stream)
int i = 0;
u32 *data = buf;
+ if (unlikely(card->eeh_state))
+ return -EIO;
+
for (i = 0; cnt8 > 0; i++, cnt8 -= 4) {
/*
* Firmware implementation makes it necessary to byte swap on
else
iowrite32(data[i], card->regmap + CREG_DATA(i));
}
+
+ return 0;
}
-static void copy_from_creg_data(struct rsxx_cardinfo *card,
+static int copy_from_creg_data(struct rsxx_cardinfo *card,
int cnt8,
void *buf,
unsigned int stream)
int i = 0;
u32 *data = buf;
+ if (unlikely(card->eeh_state))
+ return -EIO;
+
for (i = 0; cnt8 > 0; i++, cnt8 -= 4) {
/*
* Firmware implementation makes it necessary to byte swap on
else
data[i] = ioread32(card->regmap + CREG_DATA(i));
}
-}
-
-static struct creg_cmd *pop_active_cmd(struct rsxx_cardinfo *card)
-{
- struct creg_cmd *cmd;
- /*
- * Spin lock is needed because this can be called in atomic/interrupt
- * context.
- */
- spin_lock_bh(&card->creg_ctrl.lock);
- cmd = card->creg_ctrl.active_cmd;
- card->creg_ctrl.active_cmd = NULL;
- spin_unlock_bh(&card->creg_ctrl.lock);
-
- return cmd;
+ return 0;
}
static void creg_issue_cmd(struct rsxx_cardinfo *card, struct creg_cmd *cmd)
{
+ int st;
+
+ if (unlikely(card->eeh_state))
+ return;
+
iowrite32(cmd->addr, card->regmap + CREG_ADD);
iowrite32(cmd->cnt8, card->regmap + CREG_CNT);
if (cmd->op == CREG_OP_WRITE) {
- if (cmd->buf)
- copy_to_creg_data(card, cmd->cnt8,
- cmd->buf, cmd->stream);
+ if (cmd->buf) {
+ st = copy_to_creg_data(card, cmd->cnt8,
+ cmd->buf, cmd->stream);
+ if (st)
+ return;
+ }
}
- /*
- * Data copy must complete before initiating the command. This is
- * needed for weakly ordered processors (i.e. PowerPC), so that all
- * neccessary registers are written before we kick the hardware.
- */
- wmb();
+ if (unlikely(card->eeh_state))
+ return;
/* Setting the valid bit will kick off the command. */
iowrite32(cmd->op, card->regmap + CREG_CMD);
cmd->cb_private = cb_private;
cmd->status = 0;
- spin_lock(&card->creg_ctrl.lock);
+ spin_lock_bh(&card->creg_ctrl.lock);
list_add_tail(&cmd->list, &card->creg_ctrl.queue);
card->creg_ctrl.q_depth++;
creg_kick_queue(card);
- spin_unlock(&card->creg_ctrl.lock);
+ spin_unlock_bh(&card->creg_ctrl.lock);
return 0;
}
struct rsxx_cardinfo *card = (struct rsxx_cardinfo *) data;
struct creg_cmd *cmd;
- cmd = pop_active_cmd(card);
+ spin_lock(&card->creg_ctrl.lock);
+ cmd = card->creg_ctrl.active_cmd;
+ card->creg_ctrl.active_cmd = NULL;
+ spin_unlock(&card->creg_ctrl.lock);
+
if (cmd == NULL) {
card->creg_ctrl.creg_stats.creg_timeout++;
dev_warn(CARD_TO_DEV(card),
if (del_timer_sync(&card->creg_ctrl.cmd_timer) == 0)
card->creg_ctrl.creg_stats.failed_cancel_timer++;
- cmd = pop_active_cmd(card);
+ spin_lock_bh(&card->creg_ctrl.lock);
+ cmd = card->creg_ctrl.active_cmd;
+ card->creg_ctrl.active_cmd = NULL;
+ spin_unlock_bh(&card->creg_ctrl.lock);
+
if (cmd == NULL) {
dev_err(CARD_TO_DEV(card),
"Spurious creg interrupt!\n");
goto creg_done;
}
- copy_from_creg_data(card, cnt8, cmd->buf, cmd->stream);
+ st = copy_from_creg_data(card, cnt8, cmd->buf, cmd->stream);
}
creg_done:
kmem_cache_free(creg_cmd_pool, cmd);
- spin_lock(&card->creg_ctrl.lock);
+ spin_lock_bh(&card->creg_ctrl.lock);
card->creg_ctrl.active = 0;
creg_kick_queue(card);
- spin_unlock(&card->creg_ctrl.lock);
+ spin_unlock_bh(&card->creg_ctrl.lock);
}
static void creg_reset(struct rsxx_cardinfo *card)
"Resetting creg interface for recovery\n");
/* Cancel outstanding commands */
- spin_lock(&card->creg_ctrl.lock);
+ spin_lock_bh(&card->creg_ctrl.lock);
list_for_each_entry_safe(cmd, tmp, &card->creg_ctrl.queue, list) {
list_del(&cmd->list);
card->creg_ctrl.q_depth--;
card->creg_ctrl.active = 0;
}
- spin_unlock(&card->creg_ctrl.lock);
+ spin_unlock_bh(&card->creg_ctrl.lock);
card->creg_ctrl.reset = 0;
spin_lock_irqsave(&card->irq_lock, flags);
return st;
/*
- * This timeout is neccessary for unresponsive hardware. The additional
+ * This timeout is necessary for unresponsive hardware. The additional
* 20 seconds to used to guarantee that each cregs requests has time to
* complete.
*/
- timeout = msecs_to_jiffies((CREG_TIMEOUT_MSEC *
- card->creg_ctrl.q_depth) + 20000);
+ timeout = msecs_to_jiffies(CREG_TIMEOUT_MSEC *
+ card->creg_ctrl.q_depth + 20000);
/*
* The creg interface is guaranteed to complete. It has a timeout
return 0;
}
+void rsxx_eeh_save_issued_creg(struct rsxx_cardinfo *card)
+{
+ struct creg_cmd *cmd = NULL;
+
+ cmd = card->creg_ctrl.active_cmd;
+ card->creg_ctrl.active_cmd = NULL;
+
+ if (cmd) {
+ del_timer_sync(&card->creg_ctrl.cmd_timer);
+
+ spin_lock_bh(&card->creg_ctrl.lock);
+ list_add(&cmd->list, &card->creg_ctrl.queue);
+ card->creg_ctrl.q_depth++;
+ card->creg_ctrl.active = 0;
+ spin_unlock_bh(&card->creg_ctrl.lock);
+ }
+}
+
+void rsxx_kick_creg_queue(struct rsxx_cardinfo *card)
+{
+ spin_lock_bh(&card->creg_ctrl.lock);
+ if (!list_empty(&card->creg_ctrl.queue))
+ creg_kick_queue(card);
+ spin_unlock_bh(&card->creg_ctrl.lock);
+}
+
/*------------ Initialization & Setup --------------*/
int rsxx_creg_setup(struct rsxx_cardinfo *card)
{
int cnt = 0;
/* Cancel outstanding commands */
- spin_lock(&card->creg_ctrl.lock);
+ spin_lock_bh(&card->creg_ctrl.lock);
list_for_each_entry_safe(cmd, tmp, &card->creg_ctrl.queue, list) {
list_del(&cmd->list);
if (cmd->cb)
"Canceled active creg command\n");
kmem_cache_free(creg_cmd_pool, cmd);
}
- spin_unlock(&card->creg_ctrl.lock);
+ spin_unlock_bh(&card->creg_ctrl.lock);
cancel_work_sync(&card->creg_ctrl.done_work);
}
struct rsxx_dma {
struct list_head list;
u8 cmd;
- unsigned int laddr; /* Logical address on the ramsan */
+ unsigned int laddr; /* Logical address */
struct {
u32 off;
u32 cnt;
HW_STATUS_FAULT = 0x08,
};
-#define STATUS_BUFFER_SIZE8 4096
-#define COMMAND_BUFFER_SIZE8 4096
-
static struct kmem_cache *rsxx_dma_pool;
struct dma_tracker {
return tgt;
}
-static void rsxx_dma_queue_reset(struct rsxx_cardinfo *card)
+void rsxx_dma_queue_reset(struct rsxx_cardinfo *card)
{
/* Reset all DMA Command/Status Queues */
iowrite32(DMA_QUEUE_RESET, card->regmap + RESET);
u32 q_depth = 0;
u32 intr_coal;
- if (card->config.data.intr_coal.mode != RSXX_INTR_COAL_AUTO_TUNE)
+ if (card->config.data.intr_coal.mode != RSXX_INTR_COAL_AUTO_TUNE ||
+ unlikely(card->eeh_state))
return;
for (i = 0; i < card->n_targets; i++)
}
/*----------------- RSXX DMA Handling -------------------*/
-static void rsxx_complete_dma(struct rsxx_cardinfo *card,
+static void rsxx_complete_dma(struct rsxx_dma_ctrl *ctrl,
struct rsxx_dma *dma,
unsigned int status)
{
if (status & DMA_SW_ERR)
- printk_ratelimited(KERN_ERR
- "SW Error in DMA(cmd x%02x, laddr x%08x)\n",
- dma->cmd, dma->laddr);
+ ctrl->stats.dma_sw_err++;
if (status & DMA_HW_FAULT)
- printk_ratelimited(KERN_ERR
- "HW Fault in DMA(cmd x%02x, laddr x%08x)\n",
- dma->cmd, dma->laddr);
+ ctrl->stats.dma_hw_fault++;
if (status & DMA_CANCELLED)
- printk_ratelimited(KERN_ERR
- "DMA Cancelled(cmd x%02x, laddr x%08x)\n",
- dma->cmd, dma->laddr);
+ ctrl->stats.dma_cancelled++;
if (dma->dma_addr)
- pci_unmap_page(card->dev, dma->dma_addr, get_dma_size(dma),
+ pci_unmap_page(ctrl->card->dev, dma->dma_addr,
+ get_dma_size(dma),
dma->cmd == HW_CMD_BLK_WRITE ?
PCI_DMA_TODEVICE :
PCI_DMA_FROMDEVICE);
if (dma->cb)
- dma->cb(card, dma->cb_data, status ? 1 : 0);
+ dma->cb(ctrl->card, dma->cb_data, status ? 1 : 0);
kmem_cache_free(rsxx_dma_pool, dma);
}
if (requeue_cmd)
rsxx_requeue_dma(ctrl, dma);
else
- rsxx_complete_dma(ctrl->card, dma, status);
+ rsxx_complete_dma(ctrl, dma, status);
}
static void dma_engine_stalled(unsigned long data)
{
struct rsxx_dma_ctrl *ctrl = (struct rsxx_dma_ctrl *)data;
- if (atomic_read(&ctrl->stats.hw_q_depth) == 0)
+ if (atomic_read(&ctrl->stats.hw_q_depth) == 0 ||
+ unlikely(ctrl->card->eeh_state))
return;
if (ctrl->cmd.idx != ioread32(ctrl->regmap + SW_CMD_IDX)) {
ctrl = container_of(work, struct rsxx_dma_ctrl, issue_dma_work);
hw_cmd_buf = ctrl->cmd.buf;
- if (unlikely(ctrl->card->halt))
+ if (unlikely(ctrl->card->halt) ||
+ unlikely(ctrl->card->eeh_state))
return;
while (1) {
*/
if (unlikely(ctrl->card->dma_fault)) {
push_tracker(ctrl->trackers, tag);
- rsxx_complete_dma(ctrl->card, dma, DMA_CANCELLED);
+ rsxx_complete_dma(ctrl, dma, DMA_CANCELLED);
continue;
}
/* Let HW know we've queued commands. */
if (cmds_pending) {
- /*
- * We must guarantee that the CPU writes to 'ctrl->cmd.buf'
- * (which is in PCI-consistent system-memory) from the loop
- * above make it into the coherency domain before the
- * following PIO "trigger" updating the cmd.idx. A WMB is
- * sufficient. We need not explicitly CPU cache-flush since
- * the memory is a PCI-consistent (ie; coherent) mapping.
- */
- wmb();
-
atomic_add(cmds_pending, &ctrl->stats.hw_q_depth);
mod_timer(&ctrl->activity_timer,
jiffies + DMA_ACTIVITY_TIMEOUT);
+
+ if (unlikely(ctrl->card->eeh_state)) {
+ del_timer_sync(&ctrl->activity_timer);
+ return;
+ }
+
iowrite32(ctrl->cmd.idx, ctrl->regmap + SW_CMD_IDX);
}
}
hw_st_buf = ctrl->status.buf;
if (unlikely(ctrl->card->halt) ||
- unlikely(ctrl->card->dma_fault))
+ unlikely(ctrl->card->dma_fault) ||
+ unlikely(ctrl->card->eeh_state))
return;
count = le16_to_cpu(hw_st_buf[ctrl->status.idx].count);
if (status)
rsxx_handle_dma_error(ctrl, dma, status);
else
- rsxx_complete_dma(ctrl->card, dma, 0);
+ rsxx_complete_dma(ctrl, dma, 0);
push_tracker(ctrl->trackers, tag);
/*----------------- DMA Engine Initialization & Setup -------------------*/
+int rsxx_hw_buffers_init(struct pci_dev *dev, struct rsxx_dma_ctrl *ctrl)
+{
+ ctrl->status.buf = pci_alloc_consistent(dev, STATUS_BUFFER_SIZE8,
+ &ctrl->status.dma_addr);
+ ctrl->cmd.buf = pci_alloc_consistent(dev, COMMAND_BUFFER_SIZE8,
+ &ctrl->cmd.dma_addr);
+ if (ctrl->status.buf == NULL || ctrl->cmd.buf == NULL)
+ return -ENOMEM;
+
+ memset(ctrl->status.buf, 0xac, STATUS_BUFFER_SIZE8);
+ iowrite32(lower_32_bits(ctrl->status.dma_addr),
+ ctrl->regmap + SB_ADD_LO);
+ iowrite32(upper_32_bits(ctrl->status.dma_addr),
+ ctrl->regmap + SB_ADD_HI);
+
+ memset(ctrl->cmd.buf, 0x83, COMMAND_BUFFER_SIZE8);
+ iowrite32(lower_32_bits(ctrl->cmd.dma_addr), ctrl->regmap + CB_ADD_LO);
+ iowrite32(upper_32_bits(ctrl->cmd.dma_addr), ctrl->regmap + CB_ADD_HI);
+
+ ctrl->status.idx = ioread32(ctrl->regmap + HW_STATUS_CNT);
+ if (ctrl->status.idx > RSXX_MAX_OUTSTANDING_CMDS) {
+ dev_crit(&dev->dev, "Failed reading status cnt x%x\n",
+ ctrl->status.idx);
+ return -EINVAL;
+ }
+ iowrite32(ctrl->status.idx, ctrl->regmap + HW_STATUS_CNT);
+ iowrite32(ctrl->status.idx, ctrl->regmap + SW_STATUS_CNT);
+
+ ctrl->cmd.idx = ioread32(ctrl->regmap + HW_CMD_IDX);
+ if (ctrl->cmd.idx > RSXX_MAX_OUTSTANDING_CMDS) {
+ dev_crit(&dev->dev, "Failed reading cmd cnt x%x\n",
+ ctrl->status.idx);
+ return -EINVAL;
+ }
+ iowrite32(ctrl->cmd.idx, ctrl->regmap + HW_CMD_IDX);
+ iowrite32(ctrl->cmd.idx, ctrl->regmap + SW_CMD_IDX);
+
+ return 0;
+}
+
static int rsxx_dma_ctrl_init(struct pci_dev *dev,
struct rsxx_dma_ctrl *ctrl)
{
int i;
+ int st;
memset(&ctrl->stats, 0, sizeof(ctrl->stats));
- ctrl->status.buf = pci_alloc_consistent(dev, STATUS_BUFFER_SIZE8,
- &ctrl->status.dma_addr);
- ctrl->cmd.buf = pci_alloc_consistent(dev, COMMAND_BUFFER_SIZE8,
- &ctrl->cmd.dma_addr);
- if (ctrl->status.buf == NULL || ctrl->cmd.buf == NULL)
- return -ENOMEM;
-
ctrl->trackers = vmalloc(DMA_TRACKER_LIST_SIZE8);
if (!ctrl->trackers)
return -ENOMEM;
INIT_WORK(&ctrl->issue_dma_work, rsxx_issue_dmas);
INIT_WORK(&ctrl->dma_done_work, rsxx_dma_done);
- memset(ctrl->status.buf, 0xac, STATUS_BUFFER_SIZE8);
- iowrite32(lower_32_bits(ctrl->status.dma_addr),
- ctrl->regmap + SB_ADD_LO);
- iowrite32(upper_32_bits(ctrl->status.dma_addr),
- ctrl->regmap + SB_ADD_HI);
-
- memset(ctrl->cmd.buf, 0x83, COMMAND_BUFFER_SIZE8);
- iowrite32(lower_32_bits(ctrl->cmd.dma_addr), ctrl->regmap + CB_ADD_LO);
- iowrite32(upper_32_bits(ctrl->cmd.dma_addr), ctrl->regmap + CB_ADD_HI);
-
- ctrl->status.idx = ioread32(ctrl->regmap + HW_STATUS_CNT);
- if (ctrl->status.idx > RSXX_MAX_OUTSTANDING_CMDS) {
- dev_crit(&dev->dev, "Failed reading status cnt x%x\n",
- ctrl->status.idx);
- return -EINVAL;
- }
- iowrite32(ctrl->status.idx, ctrl->regmap + HW_STATUS_CNT);
- iowrite32(ctrl->status.idx, ctrl->regmap + SW_STATUS_CNT);
-
- ctrl->cmd.idx = ioread32(ctrl->regmap + HW_CMD_IDX);
- if (ctrl->cmd.idx > RSXX_MAX_OUTSTANDING_CMDS) {
- dev_crit(&dev->dev, "Failed reading cmd cnt x%x\n",
- ctrl->status.idx);
- return -EINVAL;
- }
- iowrite32(ctrl->cmd.idx, ctrl->regmap + HW_CMD_IDX);
- iowrite32(ctrl->cmd.idx, ctrl->regmap + SW_CMD_IDX);
-
- wmb();
+ st = rsxx_hw_buffers_init(dev, ctrl);
+ if (st)
+ return st;
return 0;
}
return 0;
}
-static int rsxx_dma_configure(struct rsxx_cardinfo *card)
+int rsxx_dma_configure(struct rsxx_cardinfo *card)
{
u32 intr_coal;
}
}
+int rsxx_eeh_save_issued_dmas(struct rsxx_cardinfo *card)
+{
+ int i;
+ int j;
+ int cnt;
+ struct rsxx_dma *dma;
+ struct list_head *issued_dmas;
+
+ issued_dmas = kzalloc(sizeof(*issued_dmas) * card->n_targets,
+ GFP_KERNEL);
+ if (!issued_dmas)
+ return -ENOMEM;
+
+ for (i = 0; i < card->n_targets; i++) {
+ INIT_LIST_HEAD(&issued_dmas[i]);
+ cnt = 0;
+ for (j = 0; j < RSXX_MAX_OUTSTANDING_CMDS; j++) {
+ dma = get_tracker_dma(card->ctrl[i].trackers, j);
+ if (dma == NULL)
+ continue;
+
+ if (dma->cmd == HW_CMD_BLK_WRITE)
+ card->ctrl[i].stats.writes_issued--;
+ else if (dma->cmd == HW_CMD_BLK_DISCARD)
+ card->ctrl[i].stats.discards_issued--;
+ else
+ card->ctrl[i].stats.reads_issued--;
+
+ list_add_tail(&dma->list, &issued_dmas[i]);
+ push_tracker(card->ctrl[i].trackers, j);
+ cnt++;
+ }
+
+ spin_lock(&card->ctrl[i].queue_lock);
+ list_splice(&issued_dmas[i], &card->ctrl[i].queue);
+
+ atomic_sub(cnt, &card->ctrl[i].stats.hw_q_depth);
+ card->ctrl[i].stats.sw_q_depth += cnt;
+ card->ctrl[i].e_cnt = 0;
+
+ list_for_each_entry(dma, &card->ctrl[i].queue, list) {
+ if (dma->dma_addr)
+ pci_unmap_page(card->dev, dma->dma_addr,
+ get_dma_size(dma),
+ dma->cmd == HW_CMD_BLK_WRITE ?
+ PCI_DMA_TODEVICE :
+ PCI_DMA_FROMDEVICE);
+ }
+ spin_unlock(&card->ctrl[i].queue_lock);
+ }
+
+ kfree(issued_dmas);
+
+ return 0;
+}
+
+void rsxx_eeh_cancel_dmas(struct rsxx_cardinfo *card)
+{
+ struct rsxx_dma *dma;
+ struct rsxx_dma *tmp;
+ int i;
+
+ for (i = 0; i < card->n_targets; i++) {
+ spin_lock(&card->ctrl[i].queue_lock);
+ list_for_each_entry_safe(dma, tmp, &card->ctrl[i].queue, list) {
+ list_del(&dma->list);
+
+ rsxx_complete_dma(&card->ctrl[i], dma, DMA_CANCELLED);
+ }
+ spin_unlock(&card->ctrl[i].queue_lock);
+ }
+}
+
+int rsxx_eeh_remap_dmas(struct rsxx_cardinfo *card)
+{
+ struct rsxx_dma *dma;
+ int i;
+
+ for (i = 0; i < card->n_targets; i++) {
+ spin_lock(&card->ctrl[i].queue_lock);
+ list_for_each_entry(dma, &card->ctrl[i].queue, list) {
+ dma->dma_addr = pci_map_page(card->dev, dma->page,
+ dma->pg_off, get_dma_size(dma),
+ dma->cmd == HW_CMD_BLK_WRITE ?
+ PCI_DMA_TODEVICE :
+ PCI_DMA_FROMDEVICE);
+ if (!dma->dma_addr) {
+ spin_unlock(&card->ctrl[i].queue_lock);
+ kmem_cache_free(rsxx_dma_pool, dma);
+ return -ENOMEM;
+ }
+ }
+ spin_unlock(&card->ctrl[i].queue_lock);
+ }
+
+ return 0;
+}
int rsxx_dma_init(void)
{
/*----------------- IOCTL Definitions -------------------*/
+#define RSXX_MAX_DATA 8
+
struct rsxx_reg_access {
__u32 addr;
__u32 cnt;
__u32 stat;
__u32 stream;
- __u32 data[8];
+ __u32 data[RSXX_MAX_DATA];
};
-#define RSXX_MAX_REG_CNT (8 * (sizeof(__u32)))
+#define RSXX_MAX_REG_CNT (RSXX_MAX_DATA * (sizeof(__u32)))
#define RSXX_IOC_MAGIC 'r'
};
/* Vendor ID Values */
-#define RSXX_VENDOR_ID_TMS_IBM 0
+#define RSXX_VENDOR_ID_IBM 0
#define RSXX_VENDOR_ID_DSI 1
#define RSXX_VENDOR_COUNT 2
struct proc_cmd;
-#define PCI_VENDOR_ID_TMS_IBM 0x15B6
-#define PCI_DEVICE_ID_RS70_FLASH 0x0019
-#define PCI_DEVICE_ID_RS70D_FLASH 0x001A
-#define PCI_DEVICE_ID_RS80_FLASH 0x001C
-#define PCI_DEVICE_ID_RS81_FLASH 0x001E
+#define PCI_DEVICE_ID_FS70_FLASH 0x04A9
+#define PCI_DEVICE_ID_FS80_FLASH 0x04AA
#define RS70_PCI_REV_SUPPORTED 4
#define DRIVER_NAME "rsxx"
-#define DRIVER_VERSION "3.7"
+#define DRIVER_VERSION "4.0"
/* Block size is 4096 */
#define RSXX_HW_BLK_SHIFT 12
#define RSXX_MAX_OUTSTANDING_CMDS 255
#define RSXX_CS_IDX_MASK 0xff
+#define STATUS_BUFFER_SIZE8 4096
+#define COMMAND_BUFFER_SIZE8 4096
+
#define RSXX_MAX_TARGETS 8
struct dma_tracker_list;
u32 discards_failed;
u32 done_rescheduled;
u32 issue_rescheduled;
+ u32 dma_sw_err;
+ u32 dma_hw_fault;
+ u32 dma_cancelled;
u32 sw_q_depth; /* Number of DMAs on the SW queue. */
atomic_t hw_q_depth; /* Number of DMAs queued to HW. */
};
struct rsxx_cardinfo {
struct pci_dev *dev;
unsigned int halt;
+ unsigned int eeh_state;
void __iomem *regmap;
spinlock_t irq_lock;
PERF_RD512_HI = 0xac,
PERF_WR512_LO = 0xb0,
PERF_WR512_HI = 0xb4,
+ PCI_RECONFIG = 0xb8,
};
enum rsxx_intr {
CR_INTR_DMA5 = 0x00000080,
CR_INTR_DMA6 = 0x00000100,
CR_INTR_DMA7 = 0x00000200,
+ CR_INTR_ALL_C = 0x0000003f,
+ CR_INTR_ALL_G = 0x000003ff,
CR_INTR_DMA_ALL = 0x000003f5,
CR_INTR_ALL = 0xffffffff,
};
DMA_QUEUE_RESET = 0x00000001,
};
+enum rsxx_hw_fifo_flush {
+ RSXX_FLUSH_BUSY = 0x00000002,
+ RSXX_FLUSH_TIMEOUT = 0x00000004,
+};
+
enum rsxx_pci_revision {
RSXX_DISCARD_SUPPORT = 2,
+ RSXX_EEH_SUPPORT = 3,
};
enum rsxx_creg_cmd {
void rsxx_dma_destroy(struct rsxx_cardinfo *card);
int rsxx_dma_init(void);
void rsxx_dma_cleanup(void);
+void rsxx_dma_queue_reset(struct rsxx_cardinfo *card);
+int rsxx_dma_configure(struct rsxx_cardinfo *card);
int rsxx_dma_queue_bio(struct rsxx_cardinfo *card,
struct bio *bio,
atomic_t *n_dmas,
rsxx_dma_cb cb,
void *cb_data);
+int rsxx_hw_buffers_init(struct pci_dev *dev, struct rsxx_dma_ctrl *ctrl);
+int rsxx_eeh_save_issued_dmas(struct rsxx_cardinfo *card);
+void rsxx_eeh_cancel_dmas(struct rsxx_cardinfo *card);
+int rsxx_eeh_remap_dmas(struct rsxx_cardinfo *card);
/***** cregs.c *****/
int rsxx_creg_write(struct rsxx_cardinfo *card, u32 addr,
void rsxx_creg_destroy(struct rsxx_cardinfo *card);
int rsxx_creg_init(void);
void rsxx_creg_cleanup(void);
-
int rsxx_reg_access(struct rsxx_cardinfo *card,
struct rsxx_reg_access __user *ucmd,
int read);
+void rsxx_eeh_save_issued_creg(struct rsxx_cardinfo *card);
+void rsxx_kick_creg_queue(struct rsxx_cardinfo *card);
#define foreach_grant_safe(pos, n, rbtree, node) \
for ((pos) = container_of(rb_first((rbtree)), typeof(*(pos)), node), \
- (n) = rb_next(&(pos)->node); \
+ (n) = (&(pos)->node != NULL) ? rb_next(&(pos)->node) : NULL; \
&(pos)->node != NULL; \
(pos) = container_of(n, typeof(*(pos)), node), \
(n) = (&(pos)->node != NULL) ? rb_next(&(pos)->node) : NULL)
static void print_stats(struct xen_blkif *blkif)
{
- pr_info("xen-blkback (%s): oo %3d | rd %4d | wr %4d | f %4d"
- " | ds %4d\n",
+ pr_info("xen-blkback (%s): oo %3llu | rd %4llu | wr %4llu | f %4llu"
+ " | ds %4llu\n",
current->comm, blkif->st_oo_req,
blkif->st_rd_req, blkif->st_wr_req,
blkif->st_f_req, blkif->st_ds_req);
}
struct seg_buf {
- unsigned long buf;
+ unsigned int offset;
unsigned int nsec;
};
/*
* If this is a new persistent grant
* save the handler
*/
- persistent_gnts[i]->handle = map[j].handle;
- persistent_gnts[i]->dev_bus_addr =
- map[j++].dev_bus_addr;
+ persistent_gnts[i]->handle = map[j++].handle;
}
pending_handle(pending_req, i) =
persistent_gnts[i]->handle;
if (ret)
continue;
-
- seg[i].buf = persistent_gnts[i]->dev_bus_addr |
- (req->u.rw.seg[i].first_sect << 9);
} else {
- pending_handle(pending_req, i) = map[j].handle;
+ pending_handle(pending_req, i) = map[j++].handle;
bitmap_set(pending_req->unmap_seg, i, 1);
- if (ret) {
- j++;
+ if (ret)
continue;
- }
-
- seg[i].buf = map[j++].dev_bus_addr |
- (req->u.rw.seg[i].first_sect << 9);
}
+ seg[i].offset = (req->u.rw.seg[i].first_sect << 9);
}
return ret;
}
return err;
}
+static int dispatch_other_io(struct xen_blkif *blkif,
+ struct blkif_request *req,
+ struct pending_req *pending_req)
+{
+ free_req(pending_req);
+ make_response(blkif, req->u.other.id, req->operation,
+ BLKIF_RSP_EOPNOTSUPP);
+ return -EIO;
+}
+
static void xen_blk_drain_io(struct xen_blkif *blkif)
{
atomic_set(&blkif->drain, 1);
/* Apply all sanity checks to /private copy/ of request. */
barrier();
- if (unlikely(req.operation == BLKIF_OP_DISCARD)) {
+
+ switch (req.operation) {
+ case BLKIF_OP_READ:
+ case BLKIF_OP_WRITE:
+ case BLKIF_OP_WRITE_BARRIER:
+ case BLKIF_OP_FLUSH_DISKCACHE:
+ if (dispatch_rw_block_io(blkif, &req, pending_req))
+ goto done;
+ break;
+ case BLKIF_OP_DISCARD:
free_req(pending_req);
if (dispatch_discard_io(blkif, &req))
- break;
- } else if (dispatch_rw_block_io(blkif, &req, pending_req))
+ goto done;
break;
+ default:
+ if (dispatch_other_io(blkif, &req, pending_req))
+ goto done;
+ break;
+ }
/* Yield point for this unbounded loop. */
cond_resched();
}
-
+done:
return more_to_do;
}
pr_debug(DRV_PFX "access denied: %s of [%llu,%llu] on dev=%04x\n",
operation == READ ? "read" : "write",
preq.sector_number,
- preq.sector_number + preq.nr_sects, preq.dev);
+ preq.sector_number + preq.nr_sects,
+ blkif->vbd.pdevice);
goto fail_response;
}
(bio_add_page(bio,
pages[i],
seg[i].nsec << 9,
- seg[i].buf & ~PAGE_MASK) == 0)) {
+ seg[i].offset) == 0)) {
bio = bio_alloc(GFP_KERNEL, nseg-i);
if (unlikely(bio == NULL))
bio->bi_end_io = end_block_io_op;
}
- /*
- * We set it one so that the last submit_bio does not have to call
- * atomic_inc.
- */
atomic_set(&pending_req->pendcnt, nbio);
-
- /* Get a reference count for the disk queue and start sending I/O */
blk_start_plug(&plug);
for (i = 0; i < nbio; i++)
fail_put_bio:
for (i = 0; i < nbio; i++)
bio_put(biolist[i]);
+ atomic_set(&pending_req->pendcnt, 1);
__end_block_io_op(pending_req, -EINVAL);
msleep(1); /* back off a bit */
return -EIO;
uint64_t nr_sectors;
} __attribute__((__packed__));
+struct blkif_x86_32_request_other {
+ uint8_t _pad1;
+ blkif_vdev_t _pad2;
+ uint64_t id; /* private guest value, echoed in resp */
+} __attribute__((__packed__));
+
struct blkif_x86_32_request {
uint8_t operation; /* BLKIF_OP_??? */
union {
struct blkif_x86_32_request_rw rw;
struct blkif_x86_32_request_discard discard;
+ struct blkif_x86_32_request_other other;
} u;
} __attribute__((__packed__));
uint64_t nr_sectors;
} __attribute__((__packed__));
+struct blkif_x86_64_request_other {
+ uint8_t _pad1;
+ blkif_vdev_t _pad2;
+ uint32_t _pad3; /* offsetof(blkif_..,u.discard.id)==8 */
+ uint64_t id; /* private guest value, echoed in resp */
+} __attribute__((__packed__));
+
struct blkif_x86_64_request {
uint8_t operation; /* BLKIF_OP_??? */
union {
struct blkif_x86_64_request_rw rw;
struct blkif_x86_64_request_discard discard;
+ struct blkif_x86_64_request_other other;
} u;
} __attribute__((__packed__));
struct page *page;
grant_ref_t gnt;
grant_handle_t handle;
- uint64_t dev_bus_addr;
struct rb_node node;
};
/* statistics */
unsigned long st_print;
- int st_rd_req;
- int st_wr_req;
- int st_oo_req;
- int st_f_req;
- int st_ds_req;
- int st_rd_sect;
- int st_wr_sect;
+ unsigned long long st_rd_req;
+ unsigned long long st_wr_req;
+ unsigned long long st_oo_req;
+ unsigned long long st_f_req;
+ unsigned long long st_ds_req;
+ unsigned long long st_rd_sect;
+ unsigned long long st_wr_sect;
wait_queue_head_t waiting_to_free;
};
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
default:
+ /*
+ * Don't know how to translate this op. Only get the
+ * ID so failure can be reported to the frontend.
+ */
+ dst->u.other.id = src->u.other.id;
break;
}
}
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
default:
+ /*
+ * Don't know how to translate this op. Only get the
+ * ID so failure can be reported to the frontend.
+ */
+ dst->u.other.id = src->u.other.id;
break;
}
}
} \
static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
-VBD_SHOW(oo_req, "%d\n", be->blkif->st_oo_req);
-VBD_SHOW(rd_req, "%d\n", be->blkif->st_rd_req);
-VBD_SHOW(wr_req, "%d\n", be->blkif->st_wr_req);
-VBD_SHOW(f_req, "%d\n", be->blkif->st_f_req);
-VBD_SHOW(ds_req, "%d\n", be->blkif->st_ds_req);
-VBD_SHOW(rd_sect, "%d\n", be->blkif->st_rd_sect);
-VBD_SHOW(wr_sect, "%d\n", be->blkif->st_wr_sect);
+VBD_SHOW(oo_req, "%llu\n", be->blkif->st_oo_req);
+VBD_SHOW(rd_req, "%llu\n", be->blkif->st_rd_req);
+VBD_SHOW(wr_req, "%llu\n", be->blkif->st_wr_req);
+VBD_SHOW(f_req, "%llu\n", be->blkif->st_f_req);
+VBD_SHOW(ds_req, "%llu\n", be->blkif->st_ds_req);
+VBD_SHOW(rd_sect, "%llu\n", be->blkif->st_rd_sect);
+VBD_SHOW(wr_sect, "%llu\n", be->blkif->st_wr_sect);
static struct attribute *xen_vbdstat_attrs[] = {
&dev_attr_oo_req.attr,
#include <linux/mutex.h>
#include <linux/scatterlist.h>
#include <linux/bitmap.h>
-#include <linux/llist.h>
+#include <linux/list.h>
#include <xen/xen.h>
#include <xen/xenbus.h>
struct grant {
grant_ref_t gref;
unsigned long pfn;
- struct llist_node node;
+ struct list_head node;
};
struct blk_shadow {
struct blkif_request req;
struct request *request;
- unsigned long frame[BLKIF_MAX_SEGMENTS_PER_REQUEST];
struct grant *grants_used[BLKIF_MAX_SEGMENTS_PER_REQUEST];
};
struct work_struct work;
struct gnttab_free_callback callback;
struct blk_shadow shadow[BLK_RING_SIZE];
- struct llist_head persistent_gnts;
+ struct list_head persistent_gnts;
unsigned int persistent_gnts_c;
unsigned long shadow_free;
unsigned int feature_flush;
return 0;
}
+static int fill_grant_buffer(struct blkfront_info *info, int num)
+{
+ struct page *granted_page;
+ struct grant *gnt_list_entry, *n;
+ int i = 0;
+
+ while(i < num) {
+ gnt_list_entry = kzalloc(sizeof(struct grant), GFP_NOIO);
+ if (!gnt_list_entry)
+ goto out_of_memory;
+
+ granted_page = alloc_page(GFP_NOIO);
+ if (!granted_page) {
+ kfree(gnt_list_entry);
+ goto out_of_memory;
+ }
+
+ gnt_list_entry->pfn = page_to_pfn(granted_page);
+ gnt_list_entry->gref = GRANT_INVALID_REF;
+ list_add(&gnt_list_entry->node, &info->persistent_gnts);
+ i++;
+ }
+
+ return 0;
+
+out_of_memory:
+ list_for_each_entry_safe(gnt_list_entry, n,
+ &info->persistent_gnts, node) {
+ list_del(&gnt_list_entry->node);
+ __free_page(pfn_to_page(gnt_list_entry->pfn));
+ kfree(gnt_list_entry);
+ i--;
+ }
+ BUG_ON(i != 0);
+ return -ENOMEM;
+}
+
+static struct grant *get_grant(grant_ref_t *gref_head,
+ struct blkfront_info *info)
+{
+ struct grant *gnt_list_entry;
+ unsigned long buffer_mfn;
+
+ BUG_ON(list_empty(&info->persistent_gnts));
+ gnt_list_entry = list_first_entry(&info->persistent_gnts, struct grant,
+ node);
+ list_del(&gnt_list_entry->node);
+
+ if (gnt_list_entry->gref != GRANT_INVALID_REF) {
+ info->persistent_gnts_c--;
+ return gnt_list_entry;
+ }
+
+ /* Assign a gref to this page */
+ gnt_list_entry->gref = gnttab_claim_grant_reference(gref_head);
+ BUG_ON(gnt_list_entry->gref == -ENOSPC);
+ buffer_mfn = pfn_to_mfn(gnt_list_entry->pfn);
+ gnttab_grant_foreign_access_ref(gnt_list_entry->gref,
+ info->xbdev->otherend_id,
+ buffer_mfn, 0);
+ return gnt_list_entry;
+}
+
static const char *op_name(int op)
{
static const char *const names[] = {
static int blkif_queue_request(struct request *req)
{
struct blkfront_info *info = req->rq_disk->private_data;
- unsigned long buffer_mfn;
struct blkif_request *ring_req;
unsigned long id;
unsigned int fsect, lsect;
*/
bool new_persistent_gnts;
grant_ref_t gref_head;
- struct page *granted_page;
struct grant *gnt_list_entry = NULL;
struct scatterlist *sg;
fsect = sg->offset >> 9;
lsect = fsect + (sg->length >> 9) - 1;
- if (info->persistent_gnts_c) {
- BUG_ON(llist_empty(&info->persistent_gnts));
- gnt_list_entry = llist_entry(
- llist_del_first(&info->persistent_gnts),
- struct grant, node);
-
- ref = gnt_list_entry->gref;
- buffer_mfn = pfn_to_mfn(gnt_list_entry->pfn);
- info->persistent_gnts_c--;
- } else {
- ref = gnttab_claim_grant_reference(&gref_head);
- BUG_ON(ref == -ENOSPC);
-
- gnt_list_entry =
- kmalloc(sizeof(struct grant),
- GFP_ATOMIC);
- if (!gnt_list_entry)
- return -ENOMEM;
-
- granted_page = alloc_page(GFP_ATOMIC);
- if (!granted_page) {
- kfree(gnt_list_entry);
- return -ENOMEM;
- }
-
- gnt_list_entry->pfn =
- page_to_pfn(granted_page);
- gnt_list_entry->gref = ref;
-
- buffer_mfn = pfn_to_mfn(page_to_pfn(
- granted_page));
- gnttab_grant_foreign_access_ref(ref,
- info->xbdev->otherend_id,
- buffer_mfn, 0);
- }
+ gnt_list_entry = get_grant(&gref_head, info);
+ ref = gnt_list_entry->gref;
info->shadow[id].grants_used[i] = gnt_list_entry;
kunmap_atomic(shared_data);
}
- info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
ring_req->u.rw.seg[i] =
(struct blkif_request_segment) {
.gref = ref,
static void blkif_free(struct blkfront_info *info, int suspend)
{
- struct llist_node *all_gnts;
- struct grant *persistent_gnt, *tmp;
- struct llist_node *n;
+ struct grant *persistent_gnt;
+ struct grant *n;
/* Prevent new requests being issued until we fix things up. */
spin_lock_irq(&info->io_lock);
blk_stop_queue(info->rq);
/* Remove all persistent grants */
- if (info->persistent_gnts_c) {
- all_gnts = llist_del_all(&info->persistent_gnts);
- persistent_gnt = llist_entry(all_gnts, typeof(*(persistent_gnt)), node);
- while (persistent_gnt) {
- gnttab_end_foreign_access(persistent_gnt->gref, 0, 0UL);
+ if (!list_empty(&info->persistent_gnts)) {
+ list_for_each_entry_safe(persistent_gnt, n,
+ &info->persistent_gnts, node) {
+ list_del(&persistent_gnt->node);
+ if (persistent_gnt->gref != GRANT_INVALID_REF) {
+ gnttab_end_foreign_access(persistent_gnt->gref,
+ 0, 0UL);
+ info->persistent_gnts_c--;
+ }
__free_page(pfn_to_page(persistent_gnt->pfn));
- tmp = persistent_gnt;
- n = persistent_gnt->node.next;
- if (n)
- persistent_gnt = llist_entry(n, typeof(*(persistent_gnt)), node);
- else
- persistent_gnt = NULL;
- kfree(tmp);
+ kfree(persistent_gnt);
}
- info->persistent_gnts_c = 0;
}
+ BUG_ON(info->persistent_gnts_c != 0);
/* No more gnttab callback work. */
gnttab_cancel_free_callback(&info->callback);
}
/* Add the persistent grant into the list of free grants */
for (i = 0; i < s->req.u.rw.nr_segments; i++) {
- llist_add(&s->grants_used[i]->node, &info->persistent_gnts);
+ list_add(&s->grants_used[i]->node, &info->persistent_gnts);
info->persistent_gnts_c++;
}
}
sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+ /* Allocate memory for grants */
+ err = fill_grant_buffer(info, BLK_RING_SIZE *
+ BLKIF_MAX_SEGMENTS_PER_REQUEST);
+ if (err)
+ goto fail;
+
err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring));
if (err < 0) {
free_page((unsigned long)sring);
spin_lock_init(&info->io_lock);
info->xbdev = dev;
info->vdevice = vdevice;
- init_llist_head(&info->persistent_gnts);
+ INIT_LIST_HEAD(&info->persistent_gnts);
info->persistent_gnts_c = 0;
info->connected = BLKIF_STATE_DISCONNECTED;
INIT_WORK(&info->work, blkif_restart_queue);
int j;
/* Stage 1: Make a safe copy of the shadow state. */
- copy = kmalloc(sizeof(info->shadow),
+ copy = kmemdup(info->shadow, sizeof(info->shadow),
GFP_NOIO | __GFP_REPEAT | __GFP_HIGH);
if (!copy)
return -ENOMEM;
- memcpy(copy, info->shadow, sizeof(info->shadow));
/* Stage 2: Set up free list. */
memset(&info->shadow, 0, sizeof(info->shadow));
gnttab_grant_foreign_access_ref(
req->u.rw.seg[j].gref,
info->xbdev->otherend_id,
- pfn_to_mfn(info->shadow[req->u.rw.id].frame[j]),
+ pfn_to_mfn(copy[i].grants_used[j]->pfn),
0);
}
info->shadow[req->u.rw.id].req = *req;
{ USB_DEVICE(0x03F0, 0x311D) },
/* Atheros AR3012 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x0036) },
{ USB_DEVICE(0x0CF3, 0x3004) },
+ { USB_DEVICE(0x0CF3, 0x3008) },
{ USB_DEVICE(0x0CF3, 0x311D) },
+ { USB_DEVICE(0x0CF3, 0x817a) },
{ USB_DEVICE(0x13d3, 0x3375) },
+ { USB_DEVICE(0x04CA, 0x3004) },
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x04CA, 0x3006) },
{ USB_DEVICE(0x04CA, 0x3008) },
static struct usb_device_id ath3k_blist_tbl[] = {
/* Atheros AR3012 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
/* Atheros 3012 with sflash firmware */
+ { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
}
EXPORT_SYMBOL_GPL(hwrng_unregister);
+static void __exit hwrng_exit(void)
+{
+ mutex_lock(&rng_mutex);
+ BUG_ON(current_rng);
+ kfree(rng_buffer);
+ mutex_unlock(&rng_mutex);
+}
+
+module_exit(hwrng_exit);
MODULE_DESCRIPTION("H/W Random Number Generator (RNG) driver");
MODULE_LICENSE("GPL");
{
int err;
+ if (vq) {
+ /* We only support one device for now */
+ return -EBUSY;
+ }
/* We expect a single virtqueue. */
vq = virtio_find_single_vq(vdev, random_recv_done, "input");
- if (IS_ERR(vq))
- return PTR_ERR(vq);
+ if (IS_ERR(vq)) {
+ err = PTR_ERR(vq);
+ vq = NULL;
+ return err;
+ }
err = hwrng_register(&virtio_hwrng);
if (err) {
vdev->config->del_vqs(vdev);
+ vq = NULL;
return err;
}
busy = false;
hwrng_unregister(&virtio_hwrng);
vdev->config->del_vqs(vdev);
+ vq = NULL;
}
static int virtrng_probe(struct virtio_device *vdev)
spinlock_t ports_lock;
/* To protect the vq operations for the control channel */
- spinlock_t cvq_lock;
+ spinlock_t c_ivq_lock;
+ spinlock_t c_ovq_lock;
/* The current config space is stored here */
struct virtio_console_config config;
vq = portdev->c_ovq;
sg_init_one(sg, &cpkt, sizeof(cpkt));
+
+ spin_lock(&portdev->c_ovq_lock);
if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt, GFP_ATOMIC) == 0) {
virtqueue_kick(vq);
while (!virtqueue_get_buf(vq, &len))
cpu_relax();
}
+ spin_unlock(&portdev->c_ovq_lock);
return 0;
}
* rproc_serial does not want the console port, only
* the generic port implementation.
*/
- port->host_connected = port->guest_connected = true;
+ port->host_connected = true;
else if (!use_multiport(port->portdev)) {
/*
* If we're not using multiport support,
portdev = container_of(work, struct ports_device, control_work);
vq = portdev->c_ivq;
- spin_lock(&portdev->cvq_lock);
+ spin_lock(&portdev->c_ivq_lock);
while ((buf = virtqueue_get_buf(vq, &len))) {
- spin_unlock(&portdev->cvq_lock);
+ spin_unlock(&portdev->c_ivq_lock);
buf->len = len;
buf->offset = 0;
handle_control_message(portdev, buf);
- spin_lock(&portdev->cvq_lock);
+ spin_lock(&portdev->c_ivq_lock);
if (add_inbuf(portdev->c_ivq, buf) < 0) {
dev_warn(&portdev->vdev->dev,
"Error adding buffer to queue\n");
free_buf(buf, false);
}
}
- spin_unlock(&portdev->cvq_lock);
+ spin_unlock(&portdev->c_ivq_lock);
}
static void out_intr(struct virtqueue *vq)
port->inbuf = get_inbuf(port);
/*
- * Don't queue up data when port is closed. This condition
+ * Normally the port should not accept data when the port is
+ * closed. For generic serial ports, the host won't (shouldn't)
+ * send data till the guest is connected. But this condition
* can be reached when a console port is not yet connected (no
- * tty is spawned) and the host sends out data to console
- * ports. For generic serial ports, the host won't
- * (shouldn't) send data till the guest is connected.
+ * tty is spawned) and the other side sends out data over the
+ * vring, or when a remote devices start sending data before
+ * the ports are opened.
+ *
+ * A generic serial port will discard data if not connected,
+ * while console ports and rproc-serial ports accepts data at
+ * any time. rproc-serial is initiated with guest_connected to
+ * false because port_fops_open expects this. Console ports are
+ * hooked up with an HVC console and is initialized with
+ * guest_connected to true.
*/
- if (!port->guest_connected)
+
+ if (!port->guest_connected && !is_rproc_serial(port->portdev->vdev))
discard_port_data(port);
spin_unlock_irqrestore(&port->inbuf_lock, flags);
if (multiport) {
unsigned int nr_added_bufs;
- spin_lock_init(&portdev->cvq_lock);
+ spin_lock_init(&portdev->c_ivq_lock);
+ spin_lock_init(&portdev->c_ovq_lock);
INIT_WORK(&portdev->control_work, &control_work_handler);
- nr_added_bufs = fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+ nr_added_bufs = fill_queue(portdev->c_ivq,
+ &portdev->c_ivq_lock);
if (!nr_added_bufs) {
dev_err(&vdev->dev,
"Error allocating buffers for control queue\n");
return ret;
if (use_multiport(portdev))
- fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+ fill_queue(portdev->c_ivq, &portdev->c_ivq_lock);
list_for_each_entry(port, &portdev->ports, list) {
port->in_vq = portdev->in_vqs[port->id];
McPDM. McPDM module is using the external bit clock on the McPDM bus
as functional clock.
+config COMMON_CLK_AXI_CLKGEN
+ tristate "AXI clkgen driver"
+ depends on ARCH_ZYNQ || MICROBLAZE
+ help
+ ---help---
+ Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
+ FPGAs. It is commonly used in Analog Devices' reference designs.
+
endmenu
source "drivers/clk/mvebu/Kconfig"
obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o
obj-$(CONFIG_COMMON_CLK) += clk-gate.o
obj-$(CONFIG_COMMON_CLK) += clk-mux.o
+obj-$(CONFIG_COMMON_CLK) += clk-composite.o
# SoCs specific
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_MMP) += mmp/
endif
obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
+obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
obj-$(CONFIG_ARCH_TEGRA) += tegra/
+obj-$(CONFIG_PLAT_SAMSUNG) += samsung/
obj-$(CONFIG_X86) += x86/
# Chip specific
+obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o
--- /dev/null
+/*
+ * AXI clkgen driver
+ *
+ * Copyright 2012-2013 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/err.h>
+
+#define AXI_CLKGEN_REG_UPDATE_ENABLE 0x04
+#define AXI_CLKGEN_REG_CLK_OUT1 0x08
+#define AXI_CLKGEN_REG_CLK_OUT2 0x0c
+#define AXI_CLKGEN_REG_CLK_DIV 0x10
+#define AXI_CLKGEN_REG_CLK_FB1 0x14
+#define AXI_CLKGEN_REG_CLK_FB2 0x18
+#define AXI_CLKGEN_REG_LOCK1 0x1c
+#define AXI_CLKGEN_REG_LOCK2 0x20
+#define AXI_CLKGEN_REG_LOCK3 0x24
+#define AXI_CLKGEN_REG_FILTER1 0x28
+#define AXI_CLKGEN_REG_FILTER2 0x2c
+
+struct axi_clkgen {
+ void __iomem *base;
+ struct clk_hw clk_hw;
+};
+
+static uint32_t axi_clkgen_lookup_filter(unsigned int m)
+{
+ switch (m) {
+ case 0:
+ return 0x01001990;
+ case 1:
+ return 0x01001190;
+ case 2:
+ return 0x01009890;
+ case 3:
+ return 0x01001890;
+ case 4:
+ return 0x01008890;
+ case 5 ... 8:
+ return 0x01009090;
+ case 9 ... 11:
+ return 0x01000890;
+ case 12:
+ return 0x08009090;
+ case 13 ... 22:
+ return 0x01001090;
+ case 23 ... 36:
+ return 0x01008090;
+ case 37 ... 46:
+ return 0x08001090;
+ default:
+ return 0x08008090;
+ }
+}
+
+static const uint32_t axi_clkgen_lock_table[] = {
+ 0x060603e8, 0x060603e8, 0x080803e8, 0x0b0b03e8,
+ 0x0e0e03e8, 0x111103e8, 0x131303e8, 0x161603e8,
+ 0x191903e8, 0x1c1c03e8, 0x1f1f0384, 0x1f1f0339,
+ 0x1f1f02ee, 0x1f1f02bc, 0x1f1f028a, 0x1f1f0271,
+ 0x1f1f023f, 0x1f1f0226, 0x1f1f020d, 0x1f1f01f4,
+ 0x1f1f01db, 0x1f1f01c2, 0x1f1f01a9, 0x1f1f0190,
+ 0x1f1f0190, 0x1f1f0177, 0x1f1f015e, 0x1f1f015e,
+ 0x1f1f0145, 0x1f1f0145, 0x1f1f012c, 0x1f1f012c,
+ 0x1f1f012c, 0x1f1f0113, 0x1f1f0113, 0x1f1f0113,
+};
+
+static uint32_t axi_clkgen_lookup_lock(unsigned int m)
+{
+ if (m < ARRAY_SIZE(axi_clkgen_lock_table))
+ return axi_clkgen_lock_table[m];
+ return 0x1f1f00fa;
+}
+
+static const unsigned int fpfd_min = 10000;
+static const unsigned int fpfd_max = 300000;
+static const unsigned int fvco_min = 600000;
+static const unsigned int fvco_max = 1200000;
+
+static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout,
+ unsigned int *best_d, unsigned int *best_m, unsigned int *best_dout)
+{
+ unsigned long d, d_min, d_max, _d_min, _d_max;
+ unsigned long m, m_min, m_max;
+ unsigned long f, dout, best_f, fvco;
+
+ fin /= 1000;
+ fout /= 1000;
+
+ best_f = ULONG_MAX;
+ *best_d = 0;
+ *best_m = 0;
+ *best_dout = 0;
+
+ d_min = max_t(unsigned long, DIV_ROUND_UP(fin, fpfd_max), 1);
+ d_max = min_t(unsigned long, fin / fpfd_min, 80);
+
+ m_min = max_t(unsigned long, DIV_ROUND_UP(fvco_min, fin) * d_min, 1);
+ m_max = min_t(unsigned long, fvco_max * d_max / fin, 64);
+
+ for (m = m_min; m <= m_max; m++) {
+ _d_min = max(d_min, DIV_ROUND_UP(fin * m, fvco_max));
+ _d_max = min(d_max, fin * m / fvco_min);
+
+ for (d = _d_min; d <= _d_max; d++) {
+ fvco = fin * m / d;
+
+ dout = DIV_ROUND_CLOSEST(fvco, fout);
+ dout = clamp_t(unsigned long, dout, 1, 128);
+ f = fvco / dout;
+ if (abs(f - fout) < abs(best_f - fout)) {
+ best_f = f;
+ *best_d = d;
+ *best_m = m;
+ *best_dout = dout;
+ if (best_f == fout)
+ return;
+ }
+ }
+ }
+}
+
+static void axi_clkgen_calc_clk_params(unsigned int divider, unsigned int *low,
+ unsigned int *high, unsigned int *edge, unsigned int *nocount)
+{
+ if (divider == 1)
+ *nocount = 1;
+ else
+ *nocount = 0;
+
+ *high = divider / 2;
+ *edge = divider % 2;
+ *low = divider - *high;
+}
+
+static void axi_clkgen_write(struct axi_clkgen *axi_clkgen,
+ unsigned int reg, unsigned int val)
+{
+ writel(val, axi_clkgen->base + reg);
+}
+
+static void axi_clkgen_read(struct axi_clkgen *axi_clkgen,
+ unsigned int reg, unsigned int *val)
+{
+ *val = readl(axi_clkgen->base + reg);
+}
+
+static struct axi_clkgen *clk_hw_to_axi_clkgen(struct clk_hw *clk_hw)
+{
+ return container_of(clk_hw, struct axi_clkgen, clk_hw);
+}
+
+static int axi_clkgen_set_rate(struct clk_hw *clk_hw,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
+ unsigned int d, m, dout;
+ unsigned int nocount;
+ unsigned int high;
+ unsigned int edge;
+ unsigned int low;
+ uint32_t filter;
+ uint32_t lock;
+
+ if (parent_rate == 0 || rate == 0)
+ return -EINVAL;
+
+ axi_clkgen_calc_params(parent_rate, rate, &d, &m, &dout);
+
+ if (d == 0 || dout == 0 || m == 0)
+ return -EINVAL;
+
+ filter = axi_clkgen_lookup_filter(m - 1);
+ lock = axi_clkgen_lookup_lock(m - 1);
+
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 0);
+
+ axi_clkgen_calc_clk_params(dout, &low, &high, &edge, &nocount);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1,
+ (high << 6) | low);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT2,
+ (edge << 7) | (nocount << 6));
+
+ axi_clkgen_calc_clk_params(d, &low, &high, &edge, &nocount);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV,
+ (edge << 13) | (nocount << 12) | (high << 6) | low);
+
+ axi_clkgen_calc_clk_params(m, &low, &high, &edge, &nocount);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1,
+ (high << 6) | low);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB2,
+ (edge << 7) | (nocount << 6));
+
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK1, lock & 0x3ff);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK2,
+ (((lock >> 16) & 0x1f) << 10) | 0x1);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK3,
+ (((lock >> 24) & 0x1f) << 10) | 0x3e9);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER1, filter >> 16);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER2, filter);
+
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 1);
+
+ return 0;
+}
+
+static long axi_clkgen_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned int d, m, dout;
+
+ axi_clkgen_calc_params(*parent_rate, rate, &d, &m, &dout);
+
+ if (d == 0 || dout == 0 || m == 0)
+ return -EINVAL;
+
+ return *parent_rate / d * m / dout;
+}
+
+static unsigned long axi_clkgen_recalc_rate(struct clk_hw *clk_hw,
+ unsigned long parent_rate)
+{
+ struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
+ unsigned int d, m, dout;
+ unsigned int reg;
+ unsigned long long tmp;
+
+ axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1, ®);
+ dout = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+ axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV, ®);
+ d = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+ axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1, ®);
+ m = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+
+ if (d == 0 || dout == 0)
+ return 0;
+
+ tmp = (unsigned long long)(parent_rate / d) * m;
+ do_div(tmp, dout);
+
+ if (tmp > ULONG_MAX)
+ return ULONG_MAX;
+
+ return tmp;
+}
+
+static const struct clk_ops axi_clkgen_ops = {
+ .recalc_rate = axi_clkgen_recalc_rate,
+ .round_rate = axi_clkgen_round_rate,
+ .set_rate = axi_clkgen_set_rate,
+};
+
+static int axi_clkgen_probe(struct platform_device *pdev)
+{
+ struct axi_clkgen *axi_clkgen;
+ struct clk_init_data init;
+ const char *parent_name;
+ const char *clk_name;
+ struct resource *mem;
+ struct clk *clk;
+
+ axi_clkgen = devm_kzalloc(&pdev->dev, sizeof(*axi_clkgen), GFP_KERNEL);
+ if (!axi_clkgen)
+ return -ENOMEM;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ axi_clkgen->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(axi_clkgen->base))
+ return PTR_ERR(axi_clkgen->base);
+
+ parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0);
+ if (!parent_name)
+ return -EINVAL;
+
+ clk_name = pdev->dev.of_node->name;
+ of_property_read_string(pdev->dev.of_node, "clock-output-names",
+ &clk_name);
+
+ init.name = clk_name;
+ init.ops = &axi_clkgen_ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ axi_clkgen->clk_hw.init = &init;
+ clk = devm_clk_register(&pdev->dev, &axi_clkgen->clk_hw);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ return of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get,
+ clk);
+}
+
+static int axi_clkgen_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+
+ return 0;
+}
+
+static const struct of_device_id axi_clkgen_ids[] = {
+ { .compatible = "adi,axi-clkgen-1.00.a" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, axi_clkgen_ids);
+
+static struct platform_driver axi_clkgen_driver = {
+ .driver = {
+ .name = "adi-axi-clkgen",
+ .owner = THIS_MODULE,
+ .of_match_table = axi_clkgen_ids,
+ },
+ .probe = axi_clkgen_probe,
+ .remove = axi_clkgen_remove,
+};
+module_platform_driver(axi_clkgen_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Driver for the Analog Devices' AXI clkgen pcore clock generator");
--- /dev/null
+/*
+ * Copyright (c) 2013 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
+
+static u8 clk_composite_get_parent(struct clk_hw *hw)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *mux_ops = composite->mux_ops;
+ struct clk_hw *mux_hw = composite->mux_hw;
+
+ mux_hw->clk = hw->clk;
+
+ return mux_ops->get_parent(mux_hw);
+}
+
+static int clk_composite_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *mux_ops = composite->mux_ops;
+ struct clk_hw *mux_hw = composite->mux_hw;
+
+ mux_hw->clk = hw->clk;
+
+ return mux_ops->set_parent(mux_hw, index);
+}
+
+static unsigned long clk_composite_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *div_ops = composite->div_ops;
+ struct clk_hw *div_hw = composite->div_hw;
+
+ div_hw->clk = hw->clk;
+
+ return div_ops->recalc_rate(div_hw, parent_rate);
+}
+
+static long clk_composite_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *div_ops = composite->div_ops;
+ struct clk_hw *div_hw = composite->div_hw;
+
+ div_hw->clk = hw->clk;
+
+ return div_ops->round_rate(div_hw, rate, prate);
+}
+
+static int clk_composite_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *div_ops = composite->div_ops;
+ struct clk_hw *div_hw = composite->div_hw;
+
+ div_hw->clk = hw->clk;
+
+ return div_ops->set_rate(div_hw, rate, parent_rate);
+}
+
+static int clk_composite_is_enabled(struct clk_hw *hw)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *gate_ops = composite->gate_ops;
+ struct clk_hw *gate_hw = composite->gate_hw;
+
+ gate_hw->clk = hw->clk;
+
+ return gate_ops->is_enabled(gate_hw);
+}
+
+static int clk_composite_enable(struct clk_hw *hw)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *gate_ops = composite->gate_ops;
+ struct clk_hw *gate_hw = composite->gate_hw;
+
+ gate_hw->clk = hw->clk;
+
+ return gate_ops->enable(gate_hw);
+}
+
+static void clk_composite_disable(struct clk_hw *hw)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *gate_ops = composite->gate_ops;
+ struct clk_hw *gate_hw = composite->gate_hw;
+
+ gate_hw->clk = hw->clk;
+
+ gate_ops->disable(gate_hw);
+}
+
+struct clk *clk_register_composite(struct device *dev, const char *name,
+ const char **parent_names, int num_parents,
+ struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
+ struct clk_hw *div_hw, const struct clk_ops *div_ops,
+ struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
+ unsigned long flags)
+{
+ struct clk *clk;
+ struct clk_init_data init;
+ struct clk_composite *composite;
+ struct clk_ops *clk_composite_ops;
+
+ composite = kzalloc(sizeof(*composite), GFP_KERNEL);
+ if (!composite) {
+ pr_err("%s: could not allocate composite clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ clk_composite_ops = &composite->ops;
+
+ if (mux_hw && mux_ops) {
+ if (!mux_ops->get_parent || !mux_ops->set_parent) {
+ clk = ERR_PTR(-EINVAL);
+ goto err;
+ }
+
+ composite->mux_hw = mux_hw;
+ composite->mux_ops = mux_ops;
+ clk_composite_ops->get_parent = clk_composite_get_parent;
+ clk_composite_ops->set_parent = clk_composite_set_parent;
+ }
+
+ if (div_hw && div_ops) {
+ if (!div_ops->recalc_rate || !div_ops->round_rate ||
+ !div_ops->set_rate) {
+ clk = ERR_PTR(-EINVAL);
+ goto err;
+ }
+
+ composite->div_hw = div_hw;
+ composite->div_ops = div_ops;
+ clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
+ clk_composite_ops->round_rate = clk_composite_round_rate;
+ clk_composite_ops->set_rate = clk_composite_set_rate;
+ }
+
+ if (gate_hw && gate_ops) {
+ if (!gate_ops->is_enabled || !gate_ops->enable ||
+ !gate_ops->disable) {
+ clk = ERR_PTR(-EINVAL);
+ goto err;
+ }
+
+ composite->gate_hw = gate_hw;
+ composite->gate_ops = gate_ops;
+ clk_composite_ops->is_enabled = clk_composite_is_enabled;
+ clk_composite_ops->enable = clk_composite_enable;
+ clk_composite_ops->disable = clk_composite_disable;
+ }
+
+ init.ops = clk_composite_ops;
+ composite->hw.init = &init;
+
+ clk = clk_register(dev, &composite->hw);
+ if (IS_ERR(clk))
+ goto err;
+
+ if (composite->mux_hw)
+ composite->mux_hw->clk = clk;
+
+ if (composite->div_hw)
+ composite->div_hw->clk = clk;
+
+ if (composite->gate_hw)
+ composite->gate_hw->clk = clk;
+
+ return clk;
+
+err:
+ kfree(composite);
+ return clk;
+}
static u8 clk_mux_get_parent(struct clk_hw *hw)
{
struct clk_mux *mux = to_clk_mux(hw);
+ int num_parents = __clk_get_num_parents(hw->clk);
u32 val;
/*
* val = 0x4 really means "bit 2, index starts at bit 0"
*/
val = readl(mux->reg) >> mux->shift;
- val &= (1 << mux->width) - 1;
+ val &= mux->mask;
+
+ if (mux->table) {
+ int i;
+
+ for (i = 0; i < num_parents; i++)
+ if (mux->table[i] == val)
+ return i;
+ return -EINVAL;
+ }
if (val && (mux->flags & CLK_MUX_INDEX_BIT))
val = ffs(val) - 1;
if (val && (mux->flags & CLK_MUX_INDEX_ONE))
val--;
- if (val >= __clk_get_num_parents(hw->clk))
+ if (val >= num_parents)
return -EINVAL;
return val;
u32 val;
unsigned long flags = 0;
- if (mux->flags & CLK_MUX_INDEX_BIT)
- index = (1 << ffs(index));
+ if (mux->table)
+ index = mux->table[index];
- if (mux->flags & CLK_MUX_INDEX_ONE)
- index++;
+ else {
+ if (mux->flags & CLK_MUX_INDEX_BIT)
+ index = (1 << ffs(index));
+
+ if (mux->flags & CLK_MUX_INDEX_ONE)
+ index++;
+ }
if (mux->lock)
spin_lock_irqsave(mux->lock, flags);
val = readl(mux->reg);
- val &= ~(((1 << mux->width) - 1) << mux->shift);
+ val &= ~(mux->mask << mux->shift);
val |= index << mux->shift;
writel(val, mux->reg);
};
EXPORT_SYMBOL_GPL(clk_mux_ops);
-struct clk *clk_register_mux(struct device *dev, const char *name,
+struct clk *clk_register_mux_table(struct device *dev, const char *name,
const char **parent_names, u8 num_parents, unsigned long flags,
- void __iomem *reg, u8 shift, u8 width,
- u8 clk_mux_flags, spinlock_t *lock)
+ void __iomem *reg, u8 shift, u32 mask,
+ u8 clk_mux_flags, u32 *table, spinlock_t *lock)
{
struct clk_mux *mux;
struct clk *clk;
/* struct clk_mux assignments */
mux->reg = reg;
mux->shift = shift;
- mux->width = width;
+ mux->mask = mask;
mux->flags = clk_mux_flags;
mux->lock = lock;
+ mux->table = table;
mux->hw.init = &init;
clk = clk_register(dev, &mux->hw);
return clk;
}
+
+struct clk *clk_register_mux(struct device *dev, const char *name,
+ const char **parent_names, u8 num_parents, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_mux_flags, spinlock_t *lock)
+{
+ u32 mask = BIT(width) - 1;
+
+ return clk_register_mux_table(dev, name, parent_names, num_parents,
+ flags, reg, shift, mask, clk_mux_flags,
+ NULL, lock);
+}
for (i = pll1; i < maxclk; i++) {
prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]);
- BUG_ON(!prima2_clks[i]);
+ BUG_ON(IS_ERR(prima2_clks[i]));
}
clk_register_clkdev(prima2_clks[cpu], NULL, "cpu");
clk_register_clkdev(prima2_clks[io], NULL, "io");
divisor = parent_rate / rate;
/* If prate / rate would be decimal, incr the divisor */
- if (rate * divisor < *prate)
+ if (rate * divisor < parent_rate)
divisor++;
if (divisor == cdev->div_mask + 1)
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/clk-provider.h>
+#include <linux/clk/zynq.h>
static void __iomem *slcr_base;
#include <linux/of.h>
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/sched.h>
static DEFINE_SPINLOCK(enable_lock);
static DEFINE_MUTEX(prepare_lock);
+static struct task_struct *prepare_owner;
+static struct task_struct *enable_owner;
+
+static int prepare_refcnt;
+static int enable_refcnt;
+
static HLIST_HEAD(clk_root_list);
static HLIST_HEAD(clk_orphan_list);
static LIST_HEAD(clk_notifier_list);
+/*** locking ***/
+static void clk_prepare_lock(void)
+{
+ if (!mutex_trylock(&prepare_lock)) {
+ if (prepare_owner == current) {
+ prepare_refcnt++;
+ return;
+ }
+ mutex_lock(&prepare_lock);
+ }
+ WARN_ON_ONCE(prepare_owner != NULL);
+ WARN_ON_ONCE(prepare_refcnt != 0);
+ prepare_owner = current;
+ prepare_refcnt = 1;
+}
+
+static void clk_prepare_unlock(void)
+{
+ WARN_ON_ONCE(prepare_owner != current);
+ WARN_ON_ONCE(prepare_refcnt == 0);
+
+ if (--prepare_refcnt)
+ return;
+ prepare_owner = NULL;
+ mutex_unlock(&prepare_lock);
+}
+
+static unsigned long clk_enable_lock(void)
+{
+ unsigned long flags;
+
+ if (!spin_trylock_irqsave(&enable_lock, flags)) {
+ if (enable_owner == current) {
+ enable_refcnt++;
+ return flags;
+ }
+ spin_lock_irqsave(&enable_lock, flags);
+ }
+ WARN_ON_ONCE(enable_owner != NULL);
+ WARN_ON_ONCE(enable_refcnt != 0);
+ enable_owner = current;
+ enable_refcnt = 1;
+ return flags;
+}
+
+static void clk_enable_unlock(unsigned long flags)
+{
+ WARN_ON_ONCE(enable_owner != current);
+ WARN_ON_ONCE(enable_refcnt == 0);
+
+ if (--enable_refcnt)
+ return;
+ enable_owner = NULL;
+ spin_unlock_irqrestore(&enable_lock, flags);
+}
+
/*** debugfs support ***/
#ifdef CONFIG_COMMON_CLK_DEBUG
seq_printf(s, " clock enable_cnt prepare_cnt rate\n");
seq_printf(s, "---------------------------------------------------------------------\n");
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
hlist_for_each_entry(c, &clk_root_list, child_node)
clk_summary_show_subtree(s, c, 0);
hlist_for_each_entry(c, &clk_orphan_list, child_node)
clk_summary_show_subtree(s, c, 0);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return 0;
}
seq_printf(s, "{");
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
hlist_for_each_entry(c, &clk_root_list, child_node) {
if (!first_node)
clk_dump_subtree(s, c, 0);
}
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
seq_printf(s, "}");
return 0;
if (!orphandir)
return -ENOMEM;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
hlist_for_each_entry(clk, &clk_root_list, child_node)
clk_debug_create_subtree(clk, rootdir);
inited = 1;
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return 0;
}
static inline int clk_debug_register(struct clk *clk) { return 0; }
#endif
+/* caller must hold prepare_lock */
+static void clk_unprepare_unused_subtree(struct clk *clk)
+{
+ struct clk *child;
+
+ if (!clk)
+ return;
+
+ hlist_for_each_entry(child, &clk->children, child_node)
+ clk_unprepare_unused_subtree(child);
+
+ if (clk->prepare_count)
+ return;
+
+ if (clk->flags & CLK_IGNORE_UNUSED)
+ return;
+
+ if (__clk_is_prepared(clk)) {
+ if (clk->ops->unprepare_unused)
+ clk->ops->unprepare_unused(clk->hw);
+ else if (clk->ops->unprepare)
+ clk->ops->unprepare(clk->hw);
+ }
+}
+
/* caller must hold prepare_lock */
static void clk_disable_unused_subtree(struct clk *clk)
{
hlist_for_each_entry(child, &clk->children, child_node)
clk_disable_unused_subtree(child);
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
if (clk->enable_count)
goto unlock_out;
}
unlock_out:
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
out:
return;
{
struct clk *clk;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
hlist_for_each_entry(clk, &clk_root_list, child_node)
clk_disable_unused_subtree(clk);
hlist_for_each_entry(clk, &clk_orphan_list, child_node)
clk_disable_unused_subtree(clk);
- mutex_unlock(&prepare_lock);
+ hlist_for_each_entry(clk, &clk_root_list, child_node)
+ clk_unprepare_unused_subtree(clk);
+
+ hlist_for_each_entry(clk, &clk_orphan_list, child_node)
+ clk_unprepare_unused_subtree(clk);
+
+ clk_prepare_unlock();
return 0;
}
return !clk ? 0 : clk->flags;
}
+bool __clk_is_prepared(struct clk *clk)
+{
+ int ret;
+
+ if (!clk)
+ return false;
+
+ /*
+ * .is_prepared is optional for clocks that can prepare
+ * fall back to software usage counter if it is missing
+ */
+ if (!clk->ops->is_prepared) {
+ ret = clk->prepare_count ? 1 : 0;
+ goto out;
+ }
+
+ ret = clk->ops->is_prepared(clk->hw);
+out:
+ return !!ret;
+}
+
bool __clk_is_enabled(struct clk *clk)
{
int ret;
*/
void clk_unprepare(struct clk *clk)
{
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
__clk_unprepare(clk);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
}
EXPORT_SYMBOL_GPL(clk_unprepare);
{
int ret;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
ret = __clk_prepare(clk);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
{
unsigned long flags;
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
__clk_disable(clk);
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
}
EXPORT_SYMBOL_GPL(clk_disable);
unsigned long flags;
int ret;
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
ret = __clk_enable(clk);
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
return ret;
}
{
unsigned long ret;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
ret = __clk_round_rate(clk, rate);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
{
unsigned long rate;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
if (clk && (clk->flags & CLK_GET_RATE_NOCACHE))
__clk_recalc_rates(clk, 0);
rate = __clk_get_rate(clk);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return rate;
}
int ret = NOTIFY_DONE;
if (clk->rate == clk->new_rate)
- return 0;
+ return NULL;
if (clk->notifier_count) {
ret = __clk_notify(clk, event, clk->rate, clk->new_rate);
int ret = 0;
/* prevent racing with updates to the clock topology */
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
/* bail early if nothing to do */
if (rate == clk->rate)
clk_change_rate(top);
out:
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
{
struct clk *parent;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
parent = __clk_get_parent(clk);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return parent;
}
__clk_prepare(parent);
/* FIXME replace with clk_is_enabled(clk) someday */
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
if (clk->enable_count)
__clk_enable(parent);
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
/* change clock input source */
ret = clk->ops->set_parent(clk->hw, i);
/* clean up old prepare and enable */
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
if (clk->enable_count)
__clk_disable(old_parent);
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
if (clk->prepare_count)
__clk_unprepare(old_parent);
return -ENOSYS;
/* prevent racing with updates to the clock topology */
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
if (clk->parent == parent)
goto out;
__clk_reparent(clk, parent);
out:
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
if (!clk)
return -EINVAL;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
/* check to see if a clock with this name is already registered */
if (__clk_lookup(clk->name)) {
clk_debug_register(clk);
out:
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
if (!clk || !nb)
return -EINVAL;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
/* search the list of notifiers for this clk */
list_for_each_entry(cn, &clk_notifier_list, node)
clk->notifier_count++;
out:
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
if (!clk || !nb)
return -EINVAL;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
list_for_each_entry(cn, &clk_notifier_list, node)
if (cn->clk == clk)
ret = -ENOENT;
}
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/spinlock.h>
+#include "clk.h"
DEFINE_SPINLOCK(mxs_lock);
--- /dev/null
+#
+# Samsung Clock specific Makefile
+#
+
+obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o
+obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o
+obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for all Exynos4 SoCs.
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+/* Exynos4 clock controller register offsets */
+#define SRC_LEFTBUS 0x4200
+#define DIV_LEFTBUS 0x4500
+#define GATE_IP_LEFTBUS 0x4800
+#define E4X12_GATE_IP_IMAGE 0x4930
+#define SRC_RIGHTBUS 0x8200
+#define DIV_RIGHTBUS 0x8500
+#define GATE_IP_RIGHTBUS 0x8800
+#define E4X12_GATE_IP_PERIR 0x8960
+#define EPLL_LOCK 0xc010
+#define VPLL_LOCK 0xc020
+#define EPLL_CON0 0xc110
+#define EPLL_CON1 0xc114
+#define EPLL_CON2 0xc118
+#define VPLL_CON0 0xc120
+#define VPLL_CON1 0xc124
+#define VPLL_CON2 0xc128
+#define SRC_TOP0 0xc210
+#define SRC_TOP1 0xc214
+#define SRC_CAM 0xc220
+#define SRC_TV 0xc224
+#define SRC_MFC 0xcc28
+#define SRC_G3D 0xc22c
+#define E4210_SRC_IMAGE 0xc230
+#define SRC_LCD0 0xc234
+#define E4210_SRC_LCD1 0xc238
+#define E4X12_SRC_ISP 0xc238
+#define SRC_MAUDIO 0xc23c
+#define SRC_FSYS 0xc240
+#define SRC_PERIL0 0xc250
+#define SRC_PERIL1 0xc254
+#define E4X12_SRC_CAM1 0xc258
+#define SRC_MASK_TOP 0xc310
+#define SRC_MASK_CAM 0xc320
+#define SRC_MASK_TV 0xc324
+#define SRC_MASK_LCD0 0xc334
+#define E4210_SRC_MASK_LCD1 0xc338
+#define E4X12_SRC_MASK_ISP 0xc338
+#define SRC_MASK_MAUDIO 0xc33c
+#define SRC_MASK_FSYS 0xc340
+#define SRC_MASK_PERIL0 0xc350
+#define SRC_MASK_PERIL1 0xc354
+#define DIV_TOP 0xc510
+#define DIV_CAM 0xc520
+#define DIV_TV 0xc524
+#define DIV_MFC 0xc528
+#define DIV_G3D 0xc52c
+#define DIV_IMAGE 0xc530
+#define DIV_LCD0 0xc534
+#define E4210_DIV_LCD1 0xc538
+#define E4X12_DIV_ISP 0xc538
+#define DIV_MAUDIO 0xc53c
+#define DIV_FSYS0 0xc540
+#define DIV_FSYS1 0xc544
+#define DIV_FSYS2 0xc548
+#define DIV_FSYS3 0xc54c
+#define DIV_PERIL0 0xc550
+#define DIV_PERIL1 0xc554
+#define DIV_PERIL2 0xc558
+#define DIV_PERIL3 0xc55c
+#define DIV_PERIL4 0xc560
+#define DIV_PERIL5 0xc564
+#define E4X12_DIV_CAM1 0xc568
+#define GATE_SCLK_CAM 0xc820
+#define GATE_IP_CAM 0xc920
+#define GATE_IP_TV 0xc924
+#define GATE_IP_MFC 0xc928
+#define GATE_IP_G3D 0xc92c
+#define E4210_GATE_IP_IMAGE 0xc930
+#define GATE_IP_LCD0 0xc934
+#define E4210_GATE_IP_LCD1 0xc938
+#define E4X12_GATE_IP_ISP 0xc938
+#define E4X12_GATE_IP_MAUDIO 0xc93c
+#define GATE_IP_FSYS 0xc940
+#define GATE_IP_GPS 0xc94c
+#define GATE_IP_PERIL 0xc950
+#define E4210_GATE_IP_PERIR 0xc960
+#define GATE_BLOCK 0xc970
+#define E4X12_MPLL_CON0 0x10108
+#define SRC_DMC 0x10200
+#define SRC_MASK_DMC 0x10300
+#define DIV_DMC0 0x10500
+#define DIV_DMC1 0x10504
+#define GATE_IP_DMC 0x10900
+#define APLL_CON0 0x14100
+#define E4210_MPLL_CON0 0x14108
+#define SRC_CPU 0x14200
+#define DIV_CPU0 0x14500
+#define DIV_CPU1 0x14504
+#define GATE_SCLK_CPU 0x14800
+#define GATE_IP_CPU 0x14900
+#define E4X12_DIV_ISP0 0x18300
+#define E4X12_DIV_ISP1 0x18304
+#define E4X12_GATE_ISP0 0x18800
+#define E4X12_GATE_ISP1 0x18804
+
+/* the exynos4 soc type */
+enum exynos4_soc {
+ EXYNOS4210,
+ EXYNOS4X12,
+};
+
+/*
+ * Let each supported clock get a unique id. This id is used to lookup the clock
+ * for device tree based platforms. The clocks are categorized into three
+ * sections: core, sclk gate and bus interface gate clocks.
+ *
+ * When adding a new clock to this list, it is advised to choose a clock
+ * category and add it to the end of that category. That is because the the
+ * device tree source file is referring to these ids and any change in the
+ * sequence number of existing clocks will require corresponding change in the
+ * device tree files. This limitation would go away when pre-processor support
+ * for dtc would be available.
+ */
+enum exynos4_clks {
+ none,
+
+ /* core clocks */
+ xxti, xusbxti, fin_pll, fout_apll, fout_mpll, fout_epll, fout_vpll,
+ sclk_apll, sclk_mpll, sclk_epll, sclk_vpll, arm_clk, aclk200, aclk100,
+ aclk160, aclk133, mout_mpll_user_t, mout_mpll_user_c, mout_core,
+ mout_apll, /* 20 */
+
+ /* gate for special clocks (sclk) */
+ sclk_fimc0 = 128, sclk_fimc1, sclk_fimc2, sclk_fimc3, sclk_cam0,
+ sclk_cam1, sclk_csis0, sclk_csis1, sclk_hdmi, sclk_mixer, sclk_dac,
+ sclk_pixel, sclk_fimd0, sclk_mdnie0, sclk_mdnie_pwm0, sclk_mipi0,
+ sclk_audio0, sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_mmc4,
+ sclk_sata, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_uart4,
+ sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2,
+ sclk_slimbus, sclk_fimd1, sclk_mipi1, sclk_pcm1, sclk_pcm2, sclk_i2s1,
+ sclk_i2s2, sclk_mipihsi, sclk_mfc, sclk_pcm0, sclk_g3d, sclk_pwm_isp,
+ sclk_spi0_isp, sclk_spi1_isp, sclk_uart_isp,
+
+ /* gate clocks */
+ fimc0 = 256, fimc1, fimc2, fimc3, csis0, csis1, jpeg, smmu_fimc0,
+ smmu_fimc1, smmu_fimc2, smmu_fimc3, smmu_jpeg, vp, mixer, tvenc, hdmi,
+ smmu_tv, mfc, smmu_mfcl, smmu_mfcr, g3d, g2d, rotator, mdma, smmu_g2d,
+ smmu_rotator, smmu_mdma, fimd0, mie0, mdnie0, dsim0, smmu_fimd0, fimd1,
+ mie1, dsim1, smmu_fimd1, pdma0, pdma1, pcie_phy, sata_phy, tsi, sdmmc0,
+ sdmmc1, sdmmc2, sdmmc3, sdmmc4, sata, sromc, usb_host, usb_device, pcie,
+ onenand, nfcon, smmu_pcie, gps, smmu_gps, uart0, uart1, uart2, uart3,
+ uart4, i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c_hdmi, tsadc,
+ spi0, spi1, spi2, i2s1, i2s2, pcm0, i2s0, pcm1, pcm2, pwm, slimbus,
+ spdif, ac97, modemif, chipid, sysreg, hdmi_cec, mct, wdt, rtc, keyif,
+ audss, mipi_hsi, mdma2, pixelasyncm0, pixelasyncm1, fimc_lite0,
+ fimc_lite1, ppmuispx, ppmuispmx, fimc_isp, fimc_drc, fimc_fd, mcuisp,
+ gicisp, smmu_isp, smmu_drc, smmu_fd, smmu_lite0, smmu_lite1, mcuctl_isp,
+ mpwm_isp, i2c0_isp, i2c1_isp, mtcadc_isp, pwm_isp, wdt_isp, uart_isp,
+ asyncaxim, smmu_ispcx, spi0_isp, spi1_isp, pwm_isp_sclk, spi0_isp_sclk,
+ spi1_isp_sclk, uart_isp_sclk,
+
+ /* mux clocks */
+ mout_fimc0 = 384, mout_fimc1, mout_fimc2, mout_fimc3, mout_cam0,
+ mout_cam1, mout_csis0, mout_csis1, mout_g3d0, mout_g3d1, mout_g3d,
+ aclk400_mcuisp,
+
+ /* div clocks */
+ div_isp0 = 450, div_isp1, div_mcuisp0, div_mcuisp1, div_aclk200,
+ div_aclk400_mcuisp,
+
+ nr_clks,
+};
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static __initdata unsigned long exynos4210_clk_save[] = {
+ E4210_SRC_IMAGE,
+ E4210_SRC_LCD1,
+ E4210_SRC_MASK_LCD1,
+ E4210_DIV_LCD1,
+ E4210_GATE_IP_IMAGE,
+ E4210_GATE_IP_LCD1,
+ E4210_GATE_IP_PERIR,
+ E4210_MPLL_CON0,
+};
+
+static __initdata unsigned long exynos4x12_clk_save[] = {
+ E4X12_GATE_IP_IMAGE,
+ E4X12_GATE_IP_PERIR,
+ E4X12_SRC_CAM1,
+ E4X12_DIV_ISP,
+ E4X12_DIV_CAM1,
+ E4X12_MPLL_CON0,
+};
+
+static __initdata unsigned long exynos4_clk_regs[] = {
+ SRC_LEFTBUS,
+ DIV_LEFTBUS,
+ GATE_IP_LEFTBUS,
+ SRC_RIGHTBUS,
+ DIV_RIGHTBUS,
+ GATE_IP_RIGHTBUS,
+ EPLL_CON0,
+ EPLL_CON1,
+ EPLL_CON2,
+ VPLL_CON0,
+ VPLL_CON1,
+ VPLL_CON2,
+ SRC_TOP0,
+ SRC_TOP1,
+ SRC_CAM,
+ SRC_TV,
+ SRC_MFC,
+ SRC_G3D,
+ SRC_LCD0,
+ SRC_MAUDIO,
+ SRC_FSYS,
+ SRC_PERIL0,
+ SRC_PERIL1,
+ SRC_MASK_TOP,
+ SRC_MASK_CAM,
+ SRC_MASK_TV,
+ SRC_MASK_LCD0,
+ SRC_MASK_MAUDIO,
+ SRC_MASK_FSYS,
+ SRC_MASK_PERIL0,
+ SRC_MASK_PERIL1,
+ DIV_TOP,
+ DIV_CAM,
+ DIV_TV,
+ DIV_MFC,
+ DIV_G3D,
+ DIV_IMAGE,
+ DIV_LCD0,
+ DIV_MAUDIO,
+ DIV_FSYS0,
+ DIV_FSYS1,
+ DIV_FSYS2,
+ DIV_FSYS3,
+ DIV_PERIL0,
+ DIV_PERIL1,
+ DIV_PERIL2,
+ DIV_PERIL3,
+ DIV_PERIL4,
+ DIV_PERIL5,
+ GATE_SCLK_CAM,
+ GATE_IP_CAM,
+ GATE_IP_TV,
+ GATE_IP_MFC,
+ GATE_IP_G3D,
+ GATE_IP_LCD0,
+ GATE_IP_FSYS,
+ GATE_IP_GPS,
+ GATE_IP_PERIL,
+ GATE_BLOCK,
+ SRC_MASK_DMC,
+ SRC_DMC,
+ DIV_DMC0,
+ DIV_DMC1,
+ GATE_IP_DMC,
+ APLL_CON0,
+ SRC_CPU,
+ DIV_CPU0,
+ DIV_CPU1,
+ GATE_SCLK_CPU,
+ GATE_IP_CPU,
+};
+
+/* list of all parent clock list */
+PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
+PNAME(mout_mpll_p) = { "fin_pll", "fout_mpll", };
+PNAME(mout_epll_p) = { "fin_pll", "fout_epll", };
+PNAME(mout_vpllsrc_p) = { "fin_pll", "sclk_hdmi24m", };
+PNAME(mout_vpll_p) = { "fin_pll", "fout_vpll", };
+PNAME(sclk_evpll_p) = { "sclk_epll", "sclk_vpll", };
+PNAME(mout_mfc_p) = { "mout_mfc0", "mout_mfc1", };
+PNAME(mout_g3d_p) = { "mout_g3d0", "mout_g3d1", };
+PNAME(mout_g2d_p) = { "mout_g2d0", "mout_g2d1", };
+PNAME(mout_hdmi_p) = { "sclk_pixel", "sclk_hdmiphy", };
+PNAME(mout_jpeg_p) = { "mout_jpeg0", "mout_jpeg1", };
+PNAME(mout_spdif_p) = { "sclk_audio0", "sclk_audio1", "sclk_audio2",
+ "spdif_extclk", };
+PNAME(mout_onenand_p) = {"aclk133", "aclk160", };
+PNAME(mout_onenand1_p) = {"mout_onenand", "sclk_vpll", };
+
+/* Exynos 4210-specific parent groups */
+PNAME(sclk_vpll_p4210) = { "mout_vpllsrc", "fout_vpll", };
+PNAME(mout_core_p4210) = { "mout_apll", "sclk_mpll", };
+PNAME(sclk_ampll_p4210) = { "sclk_mpll", "sclk_apll", };
+PNAME(group1_p4210) = { "xxti", "xusbxti", "sclk_hdmi24m",
+ "sclk_usbphy0", "none", "sclk_hdmiphy",
+ "sclk_mpll", "sclk_epll", "sclk_vpll", };
+PNAME(mout_audio0_p4210) = { "cdclk0", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti", "sclk_mpll",
+ "sclk_epll", "sclk_vpll" };
+PNAME(mout_audio1_p4210) = { "cdclk1", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti", "sclk_mpll",
+ "sclk_epll", "sclk_vpll", };
+PNAME(mout_audio2_p4210) = { "cdclk2", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti", "sclk_mpll",
+ "sclk_epll", "sclk_vpll", };
+PNAME(mout_mixer_p4210) = { "sclk_dac", "sclk_hdmi", };
+PNAME(mout_dac_p4210) = { "sclk_vpll", "sclk_hdmiphy", };
+
+/* Exynos 4x12-specific parent groups */
+PNAME(mout_mpll_user_p4x12) = { "fin_pll", "sclk_mpll", };
+PNAME(mout_core_p4x12) = { "mout_apll", "mout_mpll_user_c", };
+PNAME(sclk_ampll_p4x12) = { "mout_mpll_user_t", "sclk_apll", };
+PNAME(group1_p4x12) = { "xxti", "xusbxti", "sclk_hdmi24m", "sclk_usbphy0",
+ "none", "sclk_hdmiphy", "mout_mpll_user_t",
+ "sclk_epll", "sclk_vpll", };
+PNAME(mout_audio0_p4x12) = { "cdclk0", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti",
+ "mout_mpll_user_t", "sclk_epll", "sclk_vpll" };
+PNAME(mout_audio1_p4x12) = { "cdclk1", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti",
+ "mout_mpll_user_t", "sclk_epll", "sclk_vpll", };
+PNAME(mout_audio2_p4x12) = { "cdclk2", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti",
+ "mout_mpll_user_t", "sclk_epll", "sclk_vpll", };
+PNAME(aclk_p4412) = { "mout_mpll_user_t", "sclk_apll", };
+PNAME(mout_user_aclk400_mcuisp_p4x12) = {"fin_pll", "div_aclk400_mcuisp", };
+PNAME(mout_user_aclk200_p4x12) = {"fin_pll", "div_aclk200", };
+PNAME(mout_user_aclk266_gps_p4x12) = {"fin_pll", "div_aclk266_gps", };
+
+/* fixed rate clocks generated outside the soc */
+struct samsung_fixed_rate_clock exynos4_fixed_rate_ext_clks[] __initdata = {
+ FRATE(xxti, "xxti", NULL, CLK_IS_ROOT, 0),
+ FRATE(xusbxti, "xusbxti", NULL, CLK_IS_ROOT, 0),
+};
+
+/* fixed rate clocks generated inside the soc */
+struct samsung_fixed_rate_clock exynos4_fixed_rate_clks[] __initdata = {
+ FRATE(none, "sclk_hdmi24m", NULL, CLK_IS_ROOT, 24000000),
+ FRATE(none, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000),
+ FRATE(none, "sclk_usbphy0", NULL, CLK_IS_ROOT, 48000000),
+};
+
+struct samsung_fixed_rate_clock exynos4210_fixed_rate_clks[] __initdata = {
+ FRATE(none, "sclk_usbphy1", NULL, CLK_IS_ROOT, 48000000),
+};
+
+/* list of mux clocks supported in all exynos4 soc's */
+struct samsung_mux_clock exynos4_mux_clks[] __initdata = {
+ MUX_F(mout_apll, "mout_apll", mout_apll_p, SRC_CPU, 0, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX(none, "mout_hdmi", mout_hdmi_p, SRC_TV, 0, 1),
+ MUX(none, "mout_mfc1", sclk_evpll_p, SRC_MFC, 4, 1),
+ MUX(none, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1),
+ MUX_F(mout_g3d1, "mout_g3d1", sclk_evpll_p, SRC_G3D, 4, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX_F(mout_g3d, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX(none, "mout_spdif", mout_spdif_p, SRC_PERIL1, 8, 2),
+ MUX(none, "mout_onenand1", mout_onenand1_p, SRC_TOP0, 0, 1),
+ MUX_A(sclk_epll, "sclk_epll", mout_epll_p, SRC_TOP0, 4, 1, "sclk_epll"),
+ MUX(none, "mout_onenand", mout_onenand_p, SRC_TOP0, 28, 1),
+};
+
+/* list of mux clocks supported in exynos4210 soc */
+struct samsung_mux_clock exynos4210_mux_clks[] __initdata = {
+ MUX(none, "mout_aclk200", sclk_ampll_p4210, SRC_TOP0, 12, 1),
+ MUX(none, "mout_aclk100", sclk_ampll_p4210, SRC_TOP0, 16, 1),
+ MUX(none, "mout_aclk160", sclk_ampll_p4210, SRC_TOP0, 20, 1),
+ MUX(none, "mout_aclk133", sclk_ampll_p4210, SRC_TOP0, 24, 1),
+ MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1),
+ MUX(none, "mout_mixer", mout_mixer_p4210, SRC_TV, 4, 1),
+ MUX(none, "mout_dac", mout_dac_p4210, SRC_TV, 8, 1),
+ MUX(none, "mout_g2d0", sclk_ampll_p4210, E4210_SRC_IMAGE, 0, 1),
+ MUX(none, "mout_g2d1", sclk_evpll_p, E4210_SRC_IMAGE, 4, 1),
+ MUX(none, "mout_g2d", mout_g2d_p, E4210_SRC_IMAGE, 8, 1),
+ MUX(none, "mout_fimd1", group1_p4210, E4210_SRC_LCD1, 0, 4),
+ MUX(none, "mout_mipi1", group1_p4210, E4210_SRC_LCD1, 12, 4),
+ MUX_A(sclk_mpll, "sclk_mpll", mout_mpll_p, SRC_CPU, 8, 1, "sclk_mpll"),
+ MUX_A(mout_core, "mout_core", mout_core_p4210,
+ SRC_CPU, 16, 1, "mout_core"),
+ MUX_A(sclk_vpll, "sclk_vpll", sclk_vpll_p4210,
+ SRC_TOP0, 8, 1, "sclk_vpll"),
+ MUX(mout_fimc0, "mout_fimc0", group1_p4210, SRC_CAM, 0, 4),
+ MUX(mout_fimc1, "mout_fimc1", group1_p4210, SRC_CAM, 4, 4),
+ MUX(mout_fimc2, "mout_fimc2", group1_p4210, SRC_CAM, 8, 4),
+ MUX(mout_fimc3, "mout_fimc3", group1_p4210, SRC_CAM, 12, 4),
+ MUX(mout_cam0, "mout_cam0", group1_p4210, SRC_CAM, 16, 4),
+ MUX(mout_cam1, "mout_cam1", group1_p4210, SRC_CAM, 20, 4),
+ MUX(mout_csis0, "mout_csis0", group1_p4210, SRC_CAM, 24, 4),
+ MUX(mout_csis1, "mout_csis1", group1_p4210, SRC_CAM, 28, 4),
+ MUX(none, "mout_mfc0", sclk_ampll_p4210, SRC_MFC, 0, 1),
+ MUX_F(mout_g3d0, "mout_g3d0", sclk_ampll_p4210, SRC_G3D, 0, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX(none, "mout_fimd0", group1_p4210, SRC_LCD0, 0, 4),
+ MUX(none, "mout_mipi0", group1_p4210, SRC_LCD0, 12, 4),
+ MUX(none, "mout_audio0", mout_audio0_p4210, SRC_MAUDIO, 0, 4),
+ MUX(none, "mout_mmc0", group1_p4210, SRC_FSYS, 0, 4),
+ MUX(none, "mout_mmc1", group1_p4210, SRC_FSYS, 4, 4),
+ MUX(none, "mout_mmc2", group1_p4210, SRC_FSYS, 8, 4),
+ MUX(none, "mout_mmc3", group1_p4210, SRC_FSYS, 12, 4),
+ MUX(none, "mout_mmc4", group1_p4210, SRC_FSYS, 16, 4),
+ MUX(none, "mout_sata", sclk_ampll_p4210, SRC_FSYS, 24, 1),
+ MUX(none, "mout_uart0", group1_p4210, SRC_PERIL0, 0, 4),
+ MUX(none, "mout_uart1", group1_p4210, SRC_PERIL0, 4, 4),
+ MUX(none, "mout_uart2", group1_p4210, SRC_PERIL0, 8, 4),
+ MUX(none, "mout_uart3", group1_p4210, SRC_PERIL0, 12, 4),
+ MUX(none, "mout_uart4", group1_p4210, SRC_PERIL0, 16, 4),
+ MUX(none, "mout_audio1", mout_audio1_p4210, SRC_PERIL1, 0, 4),
+ MUX(none, "mout_audio2", mout_audio2_p4210, SRC_PERIL1, 4, 4),
+ MUX(none, "mout_spi0", group1_p4210, SRC_PERIL1, 16, 4),
+ MUX(none, "mout_spi1", group1_p4210, SRC_PERIL1, 20, 4),
+ MUX(none, "mout_spi2", group1_p4210, SRC_PERIL1, 24, 4),
+};
+
+/* list of mux clocks supported in exynos4x12 soc */
+struct samsung_mux_clock exynos4x12_mux_clks[] __initdata = {
+ MUX(mout_mpll_user_c, "mout_mpll_user_c", mout_mpll_user_p4x12,
+ SRC_CPU, 24, 1),
+ MUX(none, "mout_aclk266_gps", aclk_p4412, SRC_TOP1, 4, 1),
+ MUX(none, "mout_aclk400_mcuisp", aclk_p4412, SRC_TOP1, 8, 1),
+ MUX(mout_mpll_user_t, "mout_mpll_user_t", mout_mpll_user_p4x12,
+ SRC_TOP1, 12, 1),
+ MUX(none, "mout_user_aclk266_gps", mout_user_aclk266_gps_p4x12,
+ SRC_TOP1, 16, 1),
+ MUX(aclk200, "aclk200", mout_user_aclk200_p4x12, SRC_TOP1, 20, 1),
+ MUX(aclk400_mcuisp, "aclk400_mcuisp", mout_user_aclk400_mcuisp_p4x12,
+ SRC_TOP1, 24, 1),
+ MUX(none, "mout_aclk200", aclk_p4412, SRC_TOP0, 12, 1),
+ MUX(none, "mout_aclk100", aclk_p4412, SRC_TOP0, 16, 1),
+ MUX(none, "mout_aclk160", aclk_p4412, SRC_TOP0, 20, 1),
+ MUX(none, "mout_aclk133", aclk_p4412, SRC_TOP0, 24, 1),
+ MUX(none, "mout_mdnie0", group1_p4x12, SRC_LCD0, 4, 4),
+ MUX(none, "mout_mdnie_pwm0", group1_p4x12, SRC_LCD0, 8, 4),
+ MUX(none, "mout_sata", sclk_ampll_p4x12, SRC_FSYS, 24, 1),
+ MUX(none, "mout_jpeg0", sclk_ampll_p4x12, E4X12_SRC_CAM1, 0, 1),
+ MUX(none, "mout_jpeg1", sclk_evpll_p, E4X12_SRC_CAM1, 4, 1),
+ MUX(none, "mout_jpeg", mout_jpeg_p, E4X12_SRC_CAM1, 8, 1),
+ MUX_A(sclk_mpll, "sclk_mpll", mout_mpll_p,
+ SRC_DMC, 12, 1, "sclk_mpll"),
+ MUX_A(sclk_vpll, "sclk_vpll", mout_vpll_p,
+ SRC_TOP0, 8, 1, "sclk_vpll"),
+ MUX(mout_core, "mout_core", mout_core_p4x12, SRC_CPU, 16, 1),
+ MUX(mout_fimc0, "mout_fimc0", group1_p4x12, SRC_CAM, 0, 4),
+ MUX(mout_fimc1, "mout_fimc1", group1_p4x12, SRC_CAM, 4, 4),
+ MUX(mout_fimc2, "mout_fimc2", group1_p4x12, SRC_CAM, 8, 4),
+ MUX(mout_fimc3, "mout_fimc3", group1_p4x12, SRC_CAM, 12, 4),
+ MUX(mout_cam0, "mout_cam0", group1_p4x12, SRC_CAM, 16, 4),
+ MUX(mout_cam1, "mout_cam1", group1_p4x12, SRC_CAM, 20, 4),
+ MUX(mout_csis0, "mout_csis0", group1_p4x12, SRC_CAM, 24, 4),
+ MUX(mout_csis1, "mout_csis1", group1_p4x12, SRC_CAM, 28, 4),
+ MUX(none, "mout_mfc0", sclk_ampll_p4x12, SRC_MFC, 0, 1),
+ MUX_F(mout_g3d0, "mout_g3d0", sclk_ampll_p4x12, SRC_G3D, 0, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX(none, "mout_fimd0", group1_p4x12, SRC_LCD0, 0, 4),
+ MUX(none, "mout_mipi0", group1_p4x12, SRC_LCD0, 12, 4),
+ MUX(none, "mout_audio0", mout_audio0_p4x12, SRC_MAUDIO, 0, 4),
+ MUX(none, "mout_mmc0", group1_p4x12, SRC_FSYS, 0, 4),
+ MUX(none, "mout_mmc1", group1_p4x12, SRC_FSYS, 4, 4),
+ MUX(none, "mout_mmc2", group1_p4x12, SRC_FSYS, 8, 4),
+ MUX(none, "mout_mmc3", group1_p4x12, SRC_FSYS, 12, 4),
+ MUX(none, "mout_mmc4", group1_p4x12, SRC_FSYS, 16, 4),
+ MUX(none, "mout_mipihsi", aclk_p4412, SRC_FSYS, 24, 1),
+ MUX(none, "mout_uart0", group1_p4x12, SRC_PERIL0, 0, 4),
+ MUX(none, "mout_uart1", group1_p4x12, SRC_PERIL0, 4, 4),
+ MUX(none, "mout_uart2", group1_p4x12, SRC_PERIL0, 8, 4),
+ MUX(none, "mout_uart3", group1_p4x12, SRC_PERIL0, 12, 4),
+ MUX(none, "mout_uart4", group1_p4x12, SRC_PERIL0, 16, 4),
+ MUX(none, "mout_audio1", mout_audio1_p4x12, SRC_PERIL1, 0, 4),
+ MUX(none, "mout_audio2", mout_audio2_p4x12, SRC_PERIL1, 4, 4),
+ MUX(none, "mout_spi0", group1_p4x12, SRC_PERIL1, 16, 4),
+ MUX(none, "mout_spi1", group1_p4x12, SRC_PERIL1, 20, 4),
+ MUX(none, "mout_spi2", group1_p4x12, SRC_PERIL1, 24, 4),
+ MUX(none, "mout_pwm_isp", group1_p4x12, E4X12_SRC_ISP, 0, 4),
+ MUX(none, "mout_spi0_isp", group1_p4x12, E4X12_SRC_ISP, 4, 4),
+ MUX(none, "mout_spi1_isp", group1_p4x12, E4X12_SRC_ISP, 8, 4),
+ MUX(none, "mout_uart_isp", group1_p4x12, E4X12_SRC_ISP, 12, 4),
+};
+
+/* list of divider clocks supported in all exynos4 soc's */
+struct samsung_div_clock exynos4_div_clks[] __initdata = {
+ DIV(none, "div_core", "mout_core", DIV_CPU0, 0, 3),
+ DIV(none, "div_core2", "div_core", DIV_CPU0, 28, 3),
+ DIV(none, "div_fimc0", "mout_fimc0", DIV_CAM, 0, 4),
+ DIV(none, "div_fimc1", "mout_fimc1", DIV_CAM, 4, 4),
+ DIV(none, "div_fimc2", "mout_fimc2", DIV_CAM, 8, 4),
+ DIV(none, "div_fimc3", "mout_fimc3", DIV_CAM, 12, 4),
+ DIV(none, "div_cam0", "mout_cam0", DIV_CAM, 16, 4),
+ DIV(none, "div_cam1", "mout_cam1", DIV_CAM, 20, 4),
+ DIV(none, "div_csis0", "mout_csis0", DIV_CAM, 24, 4),
+ DIV(none, "div_csis1", "mout_csis1", DIV_CAM, 28, 4),
+ DIV(sclk_mfc, "sclk_mfc", "mout_mfc", DIV_MFC, 0, 4),
+ DIV_F(none, "div_g3d", "mout_g3d", DIV_G3D, 0, 4,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(none, "div_fimd0", "mout_fimd0", DIV_LCD0, 0, 4),
+ DIV(none, "div_mipi0", "mout_mipi0", DIV_LCD0, 16, 4),
+ DIV(none, "div_audio0", "mout_audio0", DIV_MAUDIO, 0, 4),
+ DIV(sclk_pcm0, "sclk_pcm0", "sclk_audio0", DIV_MAUDIO, 4, 8),
+ DIV(none, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+ DIV(none, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+ DIV(none, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
+ DIV(none, "div_mmc3", "mout_mmc3", DIV_FSYS2, 16, 4),
+ DIV(sclk_pixel, "sclk_pixel", "sclk_vpll", DIV_TV, 0, 4),
+ DIV(aclk100, "aclk100", "mout_aclk100", DIV_TOP, 4, 4),
+ DIV(aclk160, "aclk160", "mout_aclk160", DIV_TOP, 8, 3),
+ DIV(aclk133, "aclk133", "mout_aclk133", DIV_TOP, 12, 3),
+ DIV(none, "div_onenand", "mout_onenand1", DIV_TOP, 16, 3),
+ DIV(sclk_slimbus, "sclk_slimbus", "sclk_epll", DIV_PERIL3, 4, 4),
+ DIV(sclk_pcm1, "sclk_pcm1", "sclk_audio1", DIV_PERIL4, 4, 8),
+ DIV(sclk_pcm2, "sclk_pcm2", "sclk_audio2", DIV_PERIL4, 20, 8),
+ DIV(sclk_i2s1, "sclk_i2s1", "sclk_audio1", DIV_PERIL5, 0, 6),
+ DIV(sclk_i2s2, "sclk_i2s2", "sclk_audio2", DIV_PERIL5, 8, 6),
+ DIV(none, "div_mmc4", "mout_mmc4", DIV_FSYS3, 0, 4),
+ DIV(none, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8),
+ DIV(none, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
+ DIV(none, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
+ DIV(none, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
+ DIV(none, "div_uart3", "mout_uart3", DIV_PERIL0, 12, 4),
+ DIV(none, "div_uart4", "mout_uart4", DIV_PERIL0, 16, 4),
+ DIV(none, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4),
+ DIV(none, "div_spi_pre0", "div_spi0", DIV_PERIL1, 8, 8),
+ DIV(none, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4),
+ DIV(none, "div_spi_pre1", "div_spi1", DIV_PERIL1, 24, 8),
+ DIV(none, "div_spi2", "mout_spi2", DIV_PERIL2, 0, 4),
+ DIV(none, "div_spi_pre2", "div_spi2", DIV_PERIL2, 8, 8),
+ DIV(none, "div_audio1", "mout_audio1", DIV_PERIL4, 0, 4),
+ DIV(none, "div_audio2", "mout_audio2", DIV_PERIL4, 16, 4),
+ DIV_A(arm_clk, "arm_clk", "div_core2", DIV_CPU0, 28, 3, "arm_clk"),
+ DIV_A(sclk_apll, "sclk_apll", "mout_apll",
+ DIV_CPU0, 24, 3, "sclk_apll"),
+ DIV_F(none, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre0", "div_mmc0", DIV_FSYS1, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre1", "div_mmc1", DIV_FSYS1, 24, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre2", "div_mmc2", DIV_FSYS2, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre3", "div_mmc3", DIV_FSYS2, 24, 8,
+ CLK_SET_RATE_PARENT, 0),
+};
+
+/* list of divider clocks supported in exynos4210 soc */
+struct samsung_div_clock exynos4210_div_clks[] __initdata = {
+ DIV(aclk200, "aclk200", "mout_aclk200", DIV_TOP, 0, 3),
+ DIV(none, "div_g2d", "mout_g2d", DIV_IMAGE, 0, 4),
+ DIV(none, "div_fimd1", "mout_fimd1", E4210_DIV_LCD1, 0, 4),
+ DIV(none, "div_mipi1", "mout_mipi1", E4210_DIV_LCD1, 16, 4),
+ DIV(none, "div_sata", "mout_sata", DIV_FSYS0, 20, 4),
+ DIV_F(none, "div_mipi_pre1", "div_mipi1", E4210_DIV_LCD1, 20, 4,
+ CLK_SET_RATE_PARENT, 0),
+};
+
+/* list of divider clocks supported in exynos4x12 soc */
+struct samsung_div_clock exynos4x12_div_clks[] __initdata = {
+ DIV(none, "div_mdnie0", "mout_mdnie0", DIV_LCD0, 4, 4),
+ DIV(none, "div_mdnie_pwm0", "mout_mdnie_pwm0", DIV_LCD0, 8, 4),
+ DIV(none, "div_mdnie_pwm_pre0", "div_mdnie_pwm0", DIV_LCD0, 12, 4),
+ DIV(none, "div_mipihsi", "mout_mipihsi", DIV_FSYS0, 20, 4),
+ DIV(none, "div_jpeg", "mout_jpeg", E4X12_DIV_CAM1, 0, 4),
+ DIV(div_aclk200, "div_aclk200", "mout_aclk200", DIV_TOP, 0, 3),
+ DIV(none, "div_aclk266_gps", "mout_aclk266_gps", DIV_TOP, 20, 3),
+ DIV(div_aclk400_mcuisp, "div_aclk400_mcuisp", "mout_aclk400_mcuisp",
+ DIV_TOP, 24, 3),
+ DIV(none, "div_pwm_isp", "mout_pwm_isp", E4X12_DIV_ISP, 0, 4),
+ DIV(none, "div_spi0_isp", "mout_spi0_isp", E4X12_DIV_ISP, 4, 4),
+ DIV(none, "div_spi0_isp_pre", "div_spi0_isp", E4X12_DIV_ISP, 8, 8),
+ DIV(none, "div_spi1_isp", "mout_spi1_isp", E4X12_DIV_ISP, 16, 4),
+ DIV(none, "div_spi1_isp_pre", "div_spi1_isp", E4X12_DIV_ISP, 20, 8),
+ DIV(none, "div_uart_isp", "mout_uart_isp", E4X12_DIV_ISP, 28, 4),
+ DIV(div_isp0, "div_isp0", "aclk200", E4X12_DIV_ISP0, 0, 3),
+ DIV(div_isp1, "div_isp1", "aclk200", E4X12_DIV_ISP0, 4, 3),
+ DIV(none, "div_mpwm", "div_isp1", E4X12_DIV_ISP1, 0, 3),
+ DIV(div_mcuisp0, "div_mcuisp0", "aclk400_mcuisp", E4X12_DIV_ISP1, 4, 3),
+ DIV(div_mcuisp1, "div_mcuisp1", "div_mcuisp0", E4X12_DIV_ISP1, 8, 3),
+};
+
+/* list of gate clocks supported in all exynos4 soc's */
+struct samsung_gate_clock exynos4_gate_clks[] __initdata = {
+ /*
+ * After all Exynos4 based platforms are migrated to use device tree,
+ * the device name and clock alias names specified below for some
+ * of the clocks can be removed.
+ */
+ GATE(sclk_hdmi, "sclk_hdmi", "mout_hdmi", SRC_MASK_TV, 0, 0, 0),
+ GATE(sclk_spdif, "sclk_spdif", "mout_spdif", SRC_MASK_PERIL1, 8, 0, 0),
+ GATE(jpeg, "jpeg", "aclk160", GATE_IP_CAM, 6, 0, 0),
+ GATE(mie0, "mie0", "aclk160", GATE_IP_LCD0, 1, 0, 0),
+ GATE(dsim0, "dsim0", "aclk160", GATE_IP_LCD0, 3, 0, 0),
+ GATE(fimd1, "fimd1", "aclk160", E4210_GATE_IP_LCD1, 0, 0, 0),
+ GATE(mie1, "mie1", "aclk160", E4210_GATE_IP_LCD1, 1, 0, 0),
+ GATE(dsim1, "dsim1", "aclk160", E4210_GATE_IP_LCD1, 3, 0, 0),
+ GATE(smmu_fimd1, "smmu_fimd1", "aclk160", E4210_GATE_IP_LCD1, 4, 0, 0),
+ GATE(tsi, "tsi", "aclk133", GATE_IP_FSYS, 4, 0, 0),
+ GATE(sromc, "sromc", "aclk133", GATE_IP_FSYS, 11, 0, 0),
+ GATE(sclk_g3d, "sclk_g3d", "div_g3d", GATE_IP_G3D, 0,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(usb_device, "usb_device", "aclk133", GATE_IP_FSYS, 13, 0, 0),
+ GATE(onenand, "onenand", "aclk133", GATE_IP_FSYS, 15, 0, 0),
+ GATE(nfcon, "nfcon", "aclk133", GATE_IP_FSYS, 16, 0, 0),
+ GATE(gps, "gps", "aclk133", GATE_IP_GPS, 0, 0, 0),
+ GATE(smmu_gps, "smmu_gps", "aclk133", GATE_IP_GPS, 1, 0, 0),
+ GATE(slimbus, "slimbus", "aclk100", GATE_IP_PERIL, 25, 0, 0),
+ GATE(sclk_cam0, "sclk_cam0", "div_cam0", GATE_SCLK_CAM, 4,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_cam1, "sclk_cam1", "div_cam1", GATE_SCLK_CAM, 5,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mipi0, "sclk_mipi0", "div_mipi_pre0",
+ SRC_MASK_LCD0, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_audio0, "sclk_audio0", "div_audio0", SRC_MASK_MAUDIO, 0,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_audio1, "sclk_audio1", "div_audio1", SRC_MASK_PERIL1, 0,
+ CLK_SET_RATE_PARENT, 0),
+ GATE_D(vp, "s5p-mixer", "vp", "aclk160", GATE_IP_TV, 0, 0, 0),
+ GATE_D(mixer, "s5p-mixer", "mixer", "aclk160", GATE_IP_TV, 1, 0, 0),
+ GATE_D(hdmi, "exynos4-hdmi", "hdmi", "aclk160", GATE_IP_TV, 3, 0, 0),
+ GATE_A(pwm, "pwm", "aclk100", GATE_IP_PERIL, 24, 0, 0, "timers"),
+ GATE_A(sdmmc4, "sdmmc4", "aclk133", GATE_IP_FSYS, 9, 0, 0, "biu"),
+ GATE_A(usb_host, "usb_host", "aclk133",
+ GATE_IP_FSYS, 12, 0, 0, "usbhost"),
+ GATE_DA(sclk_fimc0, "exynos4-fimc.0", "sclk_fimc0", "div_fimc0",
+ SRC_MASK_CAM, 0, CLK_SET_RATE_PARENT, 0, "sclk_fimc"),
+ GATE_DA(sclk_fimc1, "exynos4-fimc.1", "sclk_fimc1", "div_fimc1",
+ SRC_MASK_CAM, 4, CLK_SET_RATE_PARENT, 0, "sclk_fimc"),
+ GATE_DA(sclk_fimc2, "exynos4-fimc.2", "sclk_fimc2", "div_fimc2",
+ SRC_MASK_CAM, 8, CLK_SET_RATE_PARENT, 0, "sclk_fimc"),
+ GATE_DA(sclk_fimc3, "exynos4-fimc.3", "sclk_fimc3", "div_fimc3",
+ SRC_MASK_CAM, 12, CLK_SET_RATE_PARENT, 0, "sclk_fimc"),
+ GATE_DA(sclk_csis0, "s5p-mipi-csis.0", "sclk_csis0", "div_csis0",
+ SRC_MASK_CAM, 24, CLK_SET_RATE_PARENT, 0, "sclk_csis"),
+ GATE_DA(sclk_csis1, "s5p-mipi-csis.1", "sclk_csis1", "div_csis1",
+ SRC_MASK_CAM, 28, CLK_SET_RATE_PARENT, 0, "sclk_csis"),
+ GATE_DA(sclk_fimd0, "exynos4-fb.0", "sclk_fimd0", "div_fimd0",
+ SRC_MASK_LCD0, 0, CLK_SET_RATE_PARENT, 0, "sclk_fimd"),
+ GATE_DA(sclk_mmc0, "exynos4-sdhci.0", "sclk_mmc0", "div_mmc_pre0",
+ SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0,
+ "mmc_busclk.2"),
+ GATE_DA(sclk_mmc1, "exynos4-sdhci.1", "sclk_mmc1", "div_mmc_pre1",
+ SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0,
+ "mmc_busclk.2"),
+ GATE_DA(sclk_mmc2, "exynos4-sdhci.2", "sclk_mmc2", "div_mmc_pre2",
+ SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0,
+ "mmc_busclk.2"),
+ GATE_DA(sclk_mmc3, "exynos4-sdhci.3", "sclk_mmc3", "div_mmc_pre3",
+ SRC_MASK_FSYS, 12, CLK_SET_RATE_PARENT, 0,
+ "mmc_busclk.2"),
+ GATE_DA(sclk_mmc4, NULL, "sclk_mmc4", "div_mmc_pre4",
+ SRC_MASK_FSYS, 16, CLK_SET_RATE_PARENT, 0, "ciu"),
+ GATE_DA(sclk_uart0, "exynos4210-uart.0", "uclk0", "div_uart0",
+ SRC_MASK_PERIL0, 0, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE_DA(sclk_uart1, "exynos4210-uart.1", "uclk1", "div_uart1",
+ SRC_MASK_PERIL0, 4, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE_DA(sclk_uart2, "exynos4210-uart.2", "uclk2", "div_uart2",
+ SRC_MASK_PERIL0, 8, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE_DA(sclk_uart3, "exynos4210-uart.3", "uclk3", "div_uart3",
+ SRC_MASK_PERIL0, 12, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE_DA(sclk_uart4, "exynos4210-uart.4", "uclk4", "div_uart4",
+ SRC_MASK_PERIL0, 16, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE(sclk_audio2, "sclk_audio2", "div_audio2", SRC_MASK_PERIL1, 4,
+ CLK_SET_RATE_PARENT, 0),
+ GATE_DA(sclk_spi0, "exynos4210-spi.0", "sclk_spi0", "div_spi_pre0",
+ SRC_MASK_PERIL1, 16, CLK_SET_RATE_PARENT,
+ 0, "spi_busclk0"),
+ GATE_DA(sclk_spi1, "exynos4210-spi.1", "sclk_spi1", "div_spi_pre1",
+ SRC_MASK_PERIL1, 20, CLK_SET_RATE_PARENT,
+ 0, "spi_busclk0"),
+ GATE_DA(sclk_spi2, "exynos4210-spi.2", "sclk_spi2", "div_spi_pre2",
+ SRC_MASK_PERIL1, 24, CLK_SET_RATE_PARENT,
+ 0, "spi_busclk0"),
+ GATE_DA(fimc0, "exynos4-fimc.0", "fimc0", "aclk160",
+ GATE_IP_CAM, 0, 0, 0, "fimc"),
+ GATE_DA(fimc1, "exynos4-fimc.1", "fimc1", "aclk160",
+ GATE_IP_CAM, 1, 0, 0, "fimc"),
+ GATE_DA(fimc2, "exynos4-fimc.2", "fimc2", "aclk160",
+ GATE_IP_CAM, 2, 0, 0, "fimc"),
+ GATE_DA(fimc3, "exynos4-fimc.3", "fimc3", "aclk160",
+ GATE_IP_CAM, 3, 0, 0, "fimc"),
+ GATE_DA(csis0, "s5p-mipi-csis.0", "csis0", "aclk160",
+ GATE_IP_CAM, 4, 0, 0, "fimc"),
+ GATE_DA(csis1, "s5p-mipi-csis.1", "csis1", "aclk160",
+ GATE_IP_CAM, 5, 0, 0, "fimc"),
+ GATE_DA(smmu_fimc0, "exynos-sysmmu.5", "smmu_fimc0", "aclk160",
+ GATE_IP_CAM, 7, 0, 0, "sysmmu"),
+ GATE_DA(smmu_fimc1, "exynos-sysmmu.6", "smmu_fimc1", "aclk160",
+ GATE_IP_CAM, 8, 0, 0, "sysmmu"),
+ GATE_DA(smmu_fimc2, "exynos-sysmmu.7", "smmu_fimc2", "aclk160",
+ GATE_IP_CAM, 9, 0, 0, "sysmmu"),
+ GATE_DA(smmu_fimc3, "exynos-sysmmu.8", "smmu_fimc3", "aclk160",
+ GATE_IP_CAM, 10, 0, 0, "sysmmu"),
+ GATE_DA(smmu_jpeg, "exynos-sysmmu.3", "smmu_jpeg", "aclk160",
+ GATE_IP_CAM, 11, 0, 0, "sysmmu"),
+ GATE(pixelasyncm0, "pxl_async0", "aclk160", GATE_IP_CAM, 17, 0, 0),
+ GATE(pixelasyncm1, "pxl_async1", "aclk160", GATE_IP_CAM, 18, 0, 0),
+ GATE_DA(smmu_tv, "exynos-sysmmu.2", "smmu_tv", "aclk160",
+ GATE_IP_TV, 4, 0, 0, "sysmmu"),
+ GATE_DA(mfc, "s5p-mfc", "mfc", "aclk100", GATE_IP_MFC, 0, 0, 0, "mfc"),
+ GATE_DA(smmu_mfcl, "exynos-sysmmu.0", "smmu_mfcl", "aclk100",
+ GATE_IP_MFC, 1, 0, 0, "sysmmu"),
+ GATE_DA(smmu_mfcr, "exynos-sysmmu.1", "smmu_mfcr", "aclk100",
+ GATE_IP_MFC, 2, 0, 0, "sysmmu"),
+ GATE_DA(fimd0, "exynos4-fb.0", "fimd0", "aclk160",
+ GATE_IP_LCD0, 0, 0, 0, "fimd"),
+ GATE_DA(smmu_fimd0, "exynos-sysmmu.10", "smmu_fimd0", "aclk160",
+ GATE_IP_LCD0, 4, 0, 0, "sysmmu"),
+ GATE_DA(pdma0, "dma-pl330.0", "pdma0", "aclk133",
+ GATE_IP_FSYS, 0, 0, 0, "dma"),
+ GATE_DA(pdma1, "dma-pl330.1", "pdma1", "aclk133",
+ GATE_IP_FSYS, 1, 0, 0, "dma"),
+ GATE_DA(sdmmc0, "exynos4-sdhci.0", "sdmmc0", "aclk133",
+ GATE_IP_FSYS, 5, 0, 0, "hsmmc"),
+ GATE_DA(sdmmc1, "exynos4-sdhci.1", "sdmmc1", "aclk133",
+ GATE_IP_FSYS, 6, 0, 0, "hsmmc"),
+ GATE_DA(sdmmc2, "exynos4-sdhci.2", "sdmmc2", "aclk133",
+ GATE_IP_FSYS, 7, 0, 0, "hsmmc"),
+ GATE_DA(sdmmc3, "exynos4-sdhci.3", "sdmmc3", "aclk133",
+ GATE_IP_FSYS, 8, 0, 0, "hsmmc"),
+ GATE_DA(uart0, "exynos4210-uart.0", "uart0", "aclk100",
+ GATE_IP_PERIL, 0, 0, 0, "uart"),
+ GATE_DA(uart1, "exynos4210-uart.1", "uart1", "aclk100",
+ GATE_IP_PERIL, 1, 0, 0, "uart"),
+ GATE_DA(uart2, "exynos4210-uart.2", "uart2", "aclk100",
+ GATE_IP_PERIL, 2, 0, 0, "uart"),
+ GATE_DA(uart3, "exynos4210-uart.3", "uart3", "aclk100",
+ GATE_IP_PERIL, 3, 0, 0, "uart"),
+ GATE_DA(uart4, "exynos4210-uart.4", "uart4", "aclk100",
+ GATE_IP_PERIL, 4, 0, 0, "uart"),
+ GATE_DA(i2c0, "s3c2440-i2c.0", "i2c0", "aclk100",
+ GATE_IP_PERIL, 6, 0, 0, "i2c"),
+ GATE_DA(i2c1, "s3c2440-i2c.1", "i2c1", "aclk100",
+ GATE_IP_PERIL, 7, 0, 0, "i2c"),
+ GATE_DA(i2c2, "s3c2440-i2c.2", "i2c2", "aclk100",
+ GATE_IP_PERIL, 8, 0, 0, "i2c"),
+ GATE_DA(i2c3, "s3c2440-i2c.3", "i2c3", "aclk100",
+ GATE_IP_PERIL, 9, 0, 0, "i2c"),
+ GATE_DA(i2c4, "s3c2440-i2c.4", "i2c4", "aclk100",
+ GATE_IP_PERIL, 10, 0, 0, "i2c"),
+ GATE_DA(i2c5, "s3c2440-i2c.5", "i2c5", "aclk100",
+ GATE_IP_PERIL, 11, 0, 0, "i2c"),
+ GATE_DA(i2c6, "s3c2440-i2c.6", "i2c6", "aclk100",
+ GATE_IP_PERIL, 12, 0, 0, "i2c"),
+ GATE_DA(i2c7, "s3c2440-i2c.7", "i2c7", "aclk100",
+ GATE_IP_PERIL, 13, 0, 0, "i2c"),
+ GATE_DA(i2c_hdmi, "s3c2440-hdmiphy-i2c", "i2c-hdmi", "aclk100",
+ GATE_IP_PERIL, 14, 0, 0, "i2c"),
+ GATE_DA(spi0, "exynos4210-spi.0", "spi0", "aclk100",
+ GATE_IP_PERIL, 16, 0, 0, "spi"),
+ GATE_DA(spi1, "exynos4210-spi.1", "spi1", "aclk100",
+ GATE_IP_PERIL, 17, 0, 0, "spi"),
+ GATE_DA(spi2, "exynos4210-spi.2", "spi2", "aclk100",
+ GATE_IP_PERIL, 18, 0, 0, "spi"),
+ GATE_DA(i2s1, "samsung-i2s.1", "i2s1", "aclk100",
+ GATE_IP_PERIL, 20, 0, 0, "iis"),
+ GATE_DA(i2s2, "samsung-i2s.2", "i2s2", "aclk100",
+ GATE_IP_PERIL, 21, 0, 0, "iis"),
+ GATE_DA(pcm1, "samsung-pcm.1", "pcm1", "aclk100",
+ GATE_IP_PERIL, 22, 0, 0, "pcm"),
+ GATE_DA(pcm2, "samsung-pcm.2", "pcm2", "aclk100",
+ GATE_IP_PERIL, 23, 0, 0, "pcm"),
+ GATE_DA(spdif, "samsung-spdif", "spdif", "aclk100",
+ GATE_IP_PERIL, 26, 0, 0, "spdif"),
+ GATE_DA(ac97, "samsung-ac97", "ac97", "aclk100",
+ GATE_IP_PERIL, 27, 0, 0, "ac97"),
+};
+
+/* list of gate clocks supported in exynos4210 soc */
+struct samsung_gate_clock exynos4210_gate_clks[] __initdata = {
+ GATE(tvenc, "tvenc", "aclk160", GATE_IP_TV, 2, 0, 0),
+ GATE(g2d, "g2d", "aclk200", E4210_GATE_IP_IMAGE, 0, 0, 0),
+ GATE(rotator, "rotator", "aclk200", E4210_GATE_IP_IMAGE, 1, 0, 0),
+ GATE(mdma, "mdma", "aclk200", E4210_GATE_IP_IMAGE, 2, 0, 0),
+ GATE(smmu_g2d, "smmu_g2d", "aclk200", E4210_GATE_IP_IMAGE, 3, 0, 0),
+ GATE(smmu_mdma, "smmu_mdma", "aclk200", E4210_GATE_IP_IMAGE, 5, 0, 0),
+ GATE(pcie_phy, "pcie_phy", "aclk133", GATE_IP_FSYS, 2, 0, 0),
+ GATE(sata_phy, "sata_phy", "aclk133", GATE_IP_FSYS, 3, 0, 0),
+ GATE(sata, "sata", "aclk133", GATE_IP_FSYS, 10, 0, 0),
+ GATE(pcie, "pcie", "aclk133", GATE_IP_FSYS, 14, 0, 0),
+ GATE(smmu_pcie, "smmu_pcie", "aclk133", GATE_IP_FSYS, 18, 0, 0),
+ GATE(modemif, "modemif", "aclk100", GATE_IP_PERIL, 28, 0, 0),
+ GATE(chipid, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0),
+ GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0),
+ GATE(hdmi_cec, "hdmi_cec", "aclk100", E4210_GATE_IP_PERIR, 11, 0, 0),
+ GATE(smmu_rotator, "smmu_rotator", "aclk200",
+ E4210_GATE_IP_IMAGE, 4, 0, 0),
+ GATE(sclk_mipi1, "sclk_mipi1", "div_mipi_pre1",
+ E4210_SRC_MASK_LCD1, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_sata, "sclk_sata", "div_sata",
+ SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mixer, "sclk_mixer", "mout_mixer", SRC_MASK_TV, 4, 0, 0),
+ GATE(sclk_dac, "sclk_dac", "mout_dac", SRC_MASK_TV, 8, 0, 0),
+ GATE_A(tsadc, "tsadc", "aclk100", GATE_IP_PERIL, 15, 0, 0, "adc"),
+ GATE_A(mct, "mct", "aclk100", E4210_GATE_IP_PERIR, 13, 0, 0, "mct"),
+ GATE_A(wdt, "watchdog", "aclk100", E4210_GATE_IP_PERIR, 14, 0, 0, "watchdog"),
+ GATE_A(rtc, "rtc", "aclk100", E4210_GATE_IP_PERIR, 15, 0, 0, "rtc"),
+ GATE_A(keyif, "keyif", "aclk100", E4210_GATE_IP_PERIR, 16, 0, 0, "keypad"),
+ GATE_DA(sclk_fimd1, "exynos4-fb.1", "sclk_fimd1", "div_fimd1",
+ E4210_SRC_MASK_LCD1, 0, CLK_SET_RATE_PARENT, 0, "sclk_fimd"),
+};
+
+/* list of gate clocks supported in exynos4x12 soc */
+struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = {
+ GATE(audss, "audss", "sclk_epll", E4X12_GATE_IP_MAUDIO, 0, 0, 0),
+ GATE(mdnie0, "mdnie0", "aclk160", GATE_IP_LCD0, 2, 0, 0),
+ GATE(rotator, "rotator", "aclk200", E4X12_GATE_IP_IMAGE, 1, 0, 0),
+ GATE(mdma2, "mdma2", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0),
+ GATE(smmu_mdma, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0, 0),
+ GATE(mipi_hsi, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0),
+ GATE(chipid, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0),
+ GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, 0, 0),
+ GATE(hdmi_cec, "hdmi_cec", "aclk100", E4X12_GATE_IP_PERIR, 11, 0, 0),
+ GATE(sclk_mdnie0, "sclk_mdnie0", "div_mdnie0",
+ SRC_MASK_LCD0, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mdnie_pwm0, "sclk_mdnie_pwm0", "div_mdnie_pwm_pre0",
+ SRC_MASK_LCD0, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mipihsi, "sclk_mipihsi", "div_mipihsi",
+ SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(smmu_rotator, "smmu_rotator", "aclk200",
+ E4X12_GATE_IP_IMAGE, 4, 0, 0),
+ GATE_A(mct, "mct", "aclk100", E4X12_GATE_IP_PERIR, 13, 0, 0, "mct"),
+ GATE_A(rtc, "rtc", "aclk100", E4X12_GATE_IP_PERIR, 15, 0, 0, "rtc"),
+ GATE_A(keyif, "keyif", "aclk100",
+ E4X12_GATE_IP_PERIR, 16, 0, 0, "keypad"),
+ GATE(sclk_pwm_isp, "sclk_pwm_isp", "div_pwm_isp",
+ E4X12_SRC_MASK_ISP, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_spi0_isp, "sclk_spi0_isp", "div_spi0_isp_pre",
+ E4X12_SRC_MASK_ISP, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_spi1_isp, "sclk_spi1_isp", "div_spi1_isp_pre",
+ E4X12_SRC_MASK_ISP, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_uart_isp, "sclk_uart_isp", "div_uart_isp",
+ E4X12_SRC_MASK_ISP, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(pwm_isp_sclk, "pwm_isp_sclk", "sclk_pwm_isp",
+ E4X12_GATE_IP_ISP, 0, 0, 0),
+ GATE(spi0_isp_sclk, "spi0_isp_sclk", "sclk_spi0_isp",
+ E4X12_GATE_IP_ISP, 1, 0, 0),
+ GATE(spi1_isp_sclk, "spi1_isp_sclk", "sclk_spi1_isp",
+ E4X12_GATE_IP_ISP, 2, 0, 0),
+ GATE(uart_isp_sclk, "uart_isp_sclk", "sclk_uart_isp",
+ E4X12_GATE_IP_ISP, 3, 0, 0),
+ GATE_A(wdt, "watchdog", "aclk100",
+ E4X12_GATE_IP_PERIR, 14, 0, 0, "watchdog"),
+ GATE_DA(pcm0, "samsung-pcm.0", "pcm0", "aclk100",
+ E4X12_GATE_IP_MAUDIO, 2, 0, 0, "pcm"),
+ GATE_DA(i2s0, "samsung-i2s.0", "i2s0", "aclk100",
+ E4X12_GATE_IP_MAUDIO, 3, 0, 0, "iis"),
+ GATE(fimc_isp, "isp", "aclk200", E4X12_GATE_ISP0, 0,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(fimc_drc, "drc", "aclk200", E4X12_GATE_ISP0, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(fimc_fd, "fd", "aclk200", E4X12_GATE_ISP0, 2,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(fimc_lite0, "lite0", "aclk200", E4X12_GATE_ISP0, 3,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(fimc_lite1, "lite1", "aclk200", E4X12_GATE_ISP0, 4,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(mcuisp, "mcuisp", "aclk200", E4X12_GATE_ISP0, 5,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(gicisp, "gicisp", "aclk200", E4X12_GATE_ISP0, 7,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_isp, "smmu_isp", "aclk200", E4X12_GATE_ISP0, 8,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_drc, "smmu_drc", "aclk200", E4X12_GATE_ISP0, 9,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_fd, "smmu_fd", "aclk200", E4X12_GATE_ISP0, 10,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_lite0, "smmu_lite0", "aclk200", E4X12_GATE_ISP0, 11,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_lite1, "smmu_lite1", "aclk200", E4X12_GATE_ISP0, 12,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(ppmuispmx, "ppmuispmx", "aclk200", E4X12_GATE_ISP0, 20,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(ppmuispx, "ppmuispx", "aclk200", E4X12_GATE_ISP0, 21,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(mcuctl_isp, "mcuctl_isp", "aclk200", E4X12_GATE_ISP0, 23,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(mpwm_isp, "mpwm_isp", "aclk200", E4X12_GATE_ISP0, 24,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(i2c0_isp, "i2c0_isp", "aclk200", E4X12_GATE_ISP0, 25,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(i2c1_isp, "i2c1_isp", "aclk200", E4X12_GATE_ISP0, 26,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(mtcadc_isp, "mtcadc_isp", "aclk200", E4X12_GATE_ISP0, 27,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(pwm_isp, "pwm_isp", "aclk200", E4X12_GATE_ISP0, 28,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(wdt_isp, "wdt_isp", "aclk200", E4X12_GATE_ISP0, 30,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(uart_isp, "uart_isp", "aclk200", E4X12_GATE_ISP0, 31,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(asyncaxim, "asyncaxim", "aclk200", E4X12_GATE_ISP1, 0,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_ispcx, "smmu_ispcx", "aclk200", E4X12_GATE_ISP1, 4,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(spi0_isp, "spi0_isp", "aclk200", E4X12_GATE_ISP1, 12,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(spi1_isp, "spi1_isp", "aclk200", E4X12_GATE_ISP1, 13,
+ CLK_IGNORE_UNUSED, 0),
+};
+
+/*
+ * The parent of the fin_pll clock is selected by the XOM[0] bit. This bit
+ * resides in chipid register space, outside of the clock controller memory
+ * mapped space. So to determine the parent of fin_pll clock, the chipid
+ * controller is first remapped and the value of XOM[0] bit is read to
+ * determine the parent clock.
+ */
+static unsigned long exynos4_get_xom(void)
+{
+ unsigned long xom = 0;
+ void __iomem *chipid_base;
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-chipid");
+ if (np) {
+ chipid_base = of_iomap(np, 0);
+
+ if (chipid_base)
+ xom = readl(chipid_base + 8);
+
+ iounmap(chipid_base);
+ }
+
+ return xom;
+}
+
+static void __init exynos4_clk_register_finpll(unsigned long xom)
+{
+ struct samsung_fixed_rate_clock fclk;
+ struct clk *clk;
+ unsigned long finpll_f = 24000000;
+ char *parent_name;
+
+ parent_name = xom & 1 ? "xusbxti" : "xxti";
+ clk = clk_get(NULL, parent_name);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to lookup parent clock %s, assuming "
+ "fin_pll clock frequency is 24MHz\n", __func__,
+ parent_name);
+ } else {
+ finpll_f = clk_get_rate(clk);
+ }
+
+ fclk.id = fin_pll;
+ fclk.name = "fin_pll";
+ fclk.parent_name = NULL;
+ fclk.flags = CLK_IS_ROOT;
+ fclk.fixed_rate = finpll_f;
+ samsung_clk_register_fixed_rate(&fclk, 1);
+
+}
+
+/*
+ * This function allows non-dt platforms to specify the clock speed of the
+ * xxti and xusbxti clocks. These clocks are then registered with the specified
+ * clock speed.
+ */
+void __init exynos4_clk_register_fixed_ext(unsigned long xxti_f,
+ unsigned long xusbxti_f)
+{
+ exynos4_fixed_rate_ext_clks[0].fixed_rate = xxti_f;
+ exynos4_fixed_rate_ext_clks[1].fixed_rate = xusbxti_f;
+ samsung_clk_register_fixed_rate(exynos4_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos4_fixed_rate_ext_clks));
+}
+
+static __initdata struct of_device_id ext_clk_match[] = {
+ { .compatible = "samsung,clock-xxti", .data = (void *)0, },
+ { .compatible = "samsung,clock-xusbxti", .data = (void *)1, },
+ {},
+};
+
+/* register exynos4 clocks */
+void __init exynos4_clk_init(struct device_node *np, enum exynos4_soc exynos4_soc, void __iomem *reg_base, unsigned long xom)
+{
+ struct clk *apll, *mpll, *epll, *vpll;
+
+ if (np) {
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+ }
+
+ if (exynos4_soc == EXYNOS4210)
+ samsung_clk_init(np, reg_base, nr_clks,
+ exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs),
+ exynos4210_clk_save, ARRAY_SIZE(exynos4210_clk_save));
+ else
+ samsung_clk_init(np, reg_base, nr_clks,
+ exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs),
+ exynos4x12_clk_save, ARRAY_SIZE(exynos4x12_clk_save));
+
+ if (np)
+ samsung_clk_of_register_fixed_ext(exynos4_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos4_fixed_rate_ext_clks),
+ ext_clk_match);
+
+ exynos4_clk_register_finpll(xom);
+
+ if (exynos4_soc == EXYNOS4210) {
+ apll = samsung_clk_register_pll45xx("fout_apll", "fin_pll",
+ reg_base + APLL_CON0, pll_4508);
+ mpll = samsung_clk_register_pll45xx("fout_mpll", "fin_pll",
+ reg_base + E4210_MPLL_CON0, pll_4508);
+ epll = samsung_clk_register_pll46xx("fout_epll", "fin_pll",
+ reg_base + EPLL_CON0, pll_4600);
+ vpll = samsung_clk_register_pll46xx("fout_vpll", "mout_vpllsrc",
+ reg_base + VPLL_CON0, pll_4650c);
+ } else {
+ apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll",
+ reg_base + APLL_CON0);
+ mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll",
+ reg_base + E4X12_MPLL_CON0);
+ epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll",
+ reg_base + EPLL_CON0);
+ vpll = samsung_clk_register_pll36xx("fout_vpll", "fin_pll",
+ reg_base + VPLL_CON0);
+ }
+
+ samsung_clk_add_lookup(apll, fout_apll);
+ samsung_clk_add_lookup(mpll, fout_mpll);
+ samsung_clk_add_lookup(epll, fout_epll);
+ samsung_clk_add_lookup(vpll, fout_vpll);
+
+ samsung_clk_register_fixed_rate(exynos4_fixed_rate_clks,
+ ARRAY_SIZE(exynos4_fixed_rate_clks));
+ samsung_clk_register_mux(exynos4_mux_clks,
+ ARRAY_SIZE(exynos4_mux_clks));
+ samsung_clk_register_div(exynos4_div_clks,
+ ARRAY_SIZE(exynos4_div_clks));
+ samsung_clk_register_gate(exynos4_gate_clks,
+ ARRAY_SIZE(exynos4_gate_clks));
+
+ if (exynos4_soc == EXYNOS4210) {
+ samsung_clk_register_fixed_rate(exynos4210_fixed_rate_clks,
+ ARRAY_SIZE(exynos4210_fixed_rate_clks));
+ samsung_clk_register_mux(exynos4210_mux_clks,
+ ARRAY_SIZE(exynos4210_mux_clks));
+ samsung_clk_register_div(exynos4210_div_clks,
+ ARRAY_SIZE(exynos4210_div_clks));
+ samsung_clk_register_gate(exynos4210_gate_clks,
+ ARRAY_SIZE(exynos4210_gate_clks));
+ } else {
+ samsung_clk_register_mux(exynos4x12_mux_clks,
+ ARRAY_SIZE(exynos4x12_mux_clks));
+ samsung_clk_register_div(exynos4x12_div_clks,
+ ARRAY_SIZE(exynos4x12_div_clks));
+ samsung_clk_register_gate(exynos4x12_gate_clks,
+ ARRAY_SIZE(exynos4x12_gate_clks));
+ }
+
+ pr_info("%s clocks: sclk_apll = %ld, sclk_mpll = %ld\n"
+ "\tsclk_epll = %ld, sclk_vpll = %ld, arm_clk = %ld\n",
+ exynos4_soc == EXYNOS4210 ? "Exynos4210" : "Exynos4x12",
+ _get_rate("sclk_apll"), _get_rate("sclk_mpll"),
+ _get_rate("sclk_epll"), _get_rate("sclk_vpll"),
+ _get_rate("arm_clk"));
+}
+
+
+static void __init exynos4210_clk_init(struct device_node *np)
+{
+ exynos4_clk_init(np, EXYNOS4210, NULL, exynos4_get_xom());
+}
+CLK_OF_DECLARE(exynos4210_clk, "samsung,exynos4210-clock", exynos4210_clk_init);
+
+static void __init exynos4412_clk_init(struct device_node *np)
+{
+ exynos4_clk_init(np, EXYNOS4X12, NULL, exynos4_get_xom());
+}
+CLK_OF_DECLARE(exynos4412_clk, "samsung,exynos4412-clock", exynos4412_clk_init);
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5250 SoC.
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define SRC_CPU 0x200
+#define DIV_CPU0 0x500
+#define SRC_CORE1 0x4204
+#define SRC_TOP0 0x10210
+#define SRC_TOP2 0x10218
+#define SRC_GSCL 0x10220
+#define SRC_DISP1_0 0x1022c
+#define SRC_MAU 0x10240
+#define SRC_FSYS 0x10244
+#define SRC_GEN 0x10248
+#define SRC_PERIC0 0x10250
+#define SRC_PERIC1 0x10254
+#define SRC_MASK_GSCL 0x10320
+#define SRC_MASK_DISP1_0 0x1032c
+#define SRC_MASK_MAU 0x10334
+#define SRC_MASK_FSYS 0x10340
+#define SRC_MASK_GEN 0x10344
+#define SRC_MASK_PERIC0 0x10350
+#define SRC_MASK_PERIC1 0x10354
+#define DIV_TOP0 0x10510
+#define DIV_TOP1 0x10514
+#define DIV_GSCL 0x10520
+#define DIV_DISP1_0 0x1052c
+#define DIV_GEN 0x1053c
+#define DIV_MAU 0x10544
+#define DIV_FSYS0 0x10548
+#define DIV_FSYS1 0x1054c
+#define DIV_FSYS2 0x10550
+#define DIV_PERIC0 0x10558
+#define DIV_PERIC1 0x1055c
+#define DIV_PERIC2 0x10560
+#define DIV_PERIC3 0x10564
+#define DIV_PERIC4 0x10568
+#define DIV_PERIC5 0x1056c
+#define GATE_IP_GSCL 0x10920
+#define GATE_IP_MFC 0x1092c
+#define GATE_IP_GEN 0x10934
+#define GATE_IP_FSYS 0x10944
+#define GATE_IP_PERIC 0x10950
+#define GATE_IP_PERIS 0x10960
+#define SRC_CDREX 0x20200
+#define PLL_DIV2_SEL 0x20a24
+#define GATE_IP_DISP1 0x10928
+
+/*
+ * Let each supported clock get a unique id. This id is used to lookup the clock
+ * for device tree based platforms. The clocks are categorized into three
+ * sections: core, sclk gate and bus interface gate clocks.
+ *
+ * When adding a new clock to this list, it is advised to choose a clock
+ * category and add it to the end of that category. That is because the the
+ * device tree source file is referring to these ids and any change in the
+ * sequence number of existing clocks will require corresponding change in the
+ * device tree files. This limitation would go away when pre-processor support
+ * for dtc would be available.
+ */
+enum exynos5250_clks {
+ none,
+
+ /* core clocks */
+ fin_pll,
+
+ /* gate for special clocks (sclk) */
+ sclk_cam_bayer = 128, sclk_cam0, sclk_cam1, sclk_gscl_wa, sclk_gscl_wb,
+ sclk_fimd1, sclk_mipi1, sclk_dp, sclk_hdmi, sclk_pixel, sclk_audio0,
+ sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_sata, sclk_usb3,
+ sclk_jpeg, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_pwm,
+ sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2,
+
+ /* gate clocks */
+ gscl0 = 256, gscl1, gscl2, gscl3, gscl_wa, gscl_wb, smmu_gscl0,
+ smmu_gscl1, smmu_gscl2, smmu_gscl3, mfc, smmu_mfcl, smmu_mfcr, rotator,
+ jpeg, mdma1, smmu_rotator, smmu_jpeg, smmu_mdma1, pdma0, pdma1, sata,
+ usbotg, mipi_hsi, sdmmc0, sdmmc1, sdmmc2, sdmmc3, sromc, usb2, usb3,
+ sata_phyctrl, sata_phyi2c, uart0, uart1, uart2, uart3, uart4, i2c0,
+ i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c_hdmi, adc, spi0, spi1,
+ spi2, i2s1, i2s2, pcm1, pcm2, pwm, spdif, ac97, hsi2c0, hsi2c1, hsi2c2,
+ hsi2c3, chipid, sysreg, pmu, cmu_top, cmu_core, cmu_mem, tzpc0, tzpc1,
+ tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7, tzpc8, tzpc9, hdmi_cec, mct,
+ wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi,
+
+ nr_clks,
+};
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static __initdata unsigned long exynos5250_clk_regs[] = {
+ SRC_CPU,
+ DIV_CPU0,
+ SRC_CORE1,
+ SRC_TOP0,
+ SRC_TOP2,
+ SRC_GSCL,
+ SRC_DISP1_0,
+ SRC_MAU,
+ SRC_FSYS,
+ SRC_GEN,
+ SRC_PERIC0,
+ SRC_PERIC1,
+ SRC_MASK_GSCL,
+ SRC_MASK_DISP1_0,
+ SRC_MASK_MAU,
+ SRC_MASK_FSYS,
+ SRC_MASK_GEN,
+ SRC_MASK_PERIC0,
+ SRC_MASK_PERIC1,
+ DIV_TOP0,
+ DIV_TOP1,
+ DIV_GSCL,
+ DIV_DISP1_0,
+ DIV_GEN,
+ DIV_MAU,
+ DIV_FSYS0,
+ DIV_FSYS1,
+ DIV_FSYS2,
+ DIV_PERIC0,
+ DIV_PERIC1,
+ DIV_PERIC2,
+ DIV_PERIC3,
+ DIV_PERIC4,
+ DIV_PERIC5,
+ GATE_IP_GSCL,
+ GATE_IP_MFC,
+ GATE_IP_GEN,
+ GATE_IP_FSYS,
+ GATE_IP_PERIC,
+ GATE_IP_PERIS,
+ SRC_CDREX,
+ PLL_DIV2_SEL,
+ GATE_IP_DISP1,
+};
+
+/* list of all parent clock list */
+PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
+PNAME(mout_cpu_p) = { "mout_apll", "mout_mpll", };
+PNAME(mout_mpll_fout_p) = { "fout_mplldiv2", "fout_mpll" };
+PNAME(mout_mpll_p) = { "fin_pll", "mout_mpll_fout" };
+PNAME(mout_bpll_fout_p) = { "fout_bplldiv2", "fout_bpll" };
+PNAME(mout_bpll_p) = { "fin_pll", "mout_bpll_fout" };
+PNAME(mout_vpllsrc_p) = { "fin_pll", "sclk_hdmi27m" };
+PNAME(mout_vpll_p) = { "mout_vpllsrc", "fout_vpll" };
+PNAME(mout_cpll_p) = { "fin_pll", "fout_cpll" };
+PNAME(mout_epll_p) = { "fin_pll", "fout_epll" };
+PNAME(mout_mpll_user_p) = { "fin_pll", "sclk_mpll" };
+PNAME(mout_bpll_user_p) = { "fin_pll", "sclk_bpll" };
+PNAME(mout_aclk166_p) = { "sclk_cpll", "sclk_mpll_user" };
+PNAME(mout_aclk200_p) = { "sclk_mpll_user", "sclk_bpll_user" };
+PNAME(mout_hdmi_p) = { "div_hdmi_pixel", "sclk_hdmiphy" };
+PNAME(mout_usb3_p) = { "sclk_mpll_user", "sclk_cpll" };
+PNAME(mout_group1_p) = { "fin_pll", "fin_pll", "sclk_hdmi27m",
+ "sclk_dptxphy", "sclk_uhostphy", "sclk_hdmiphy",
+ "sclk_mpll_user", "sclk_epll", "sclk_vpll",
+ "sclk_cpll" };
+PNAME(mout_audio0_p) = { "cdclk0", "fin_pll", "sclk_hdmi27m", "sclk_dptxphy",
+ "sclk_uhostphy", "sclk_hdmiphy",
+ "sclk_mpll_user", "sclk_epll", "sclk_vpll",
+ "sclk_cpll" };
+PNAME(mout_audio1_p) = { "cdclk1", "fin_pll", "sclk_hdmi27m", "sclk_dptxphy",
+ "sclk_uhostphy", "sclk_hdmiphy",
+ "sclk_mpll_user", "sclk_epll", "sclk_vpll",
+ "sclk_cpll" };
+PNAME(mout_audio2_p) = { "cdclk2", "fin_pll", "sclk_hdmi27m", "sclk_dptxphy",
+ "sclk_uhostphy", "sclk_hdmiphy",
+ "sclk_mpll_user", "sclk_epll", "sclk_vpll",
+ "sclk_cpll" };
+PNAME(mout_spdif_p) = { "sclk_audio0", "sclk_audio1", "sclk_audio2",
+ "spdif_extclk" };
+
+/* fixed rate clocks generated outside the soc */
+struct samsung_fixed_rate_clock exynos5250_fixed_rate_ext_clks[] __initdata = {
+ FRATE(fin_pll, "fin_pll", NULL, CLK_IS_ROOT, 0),
+};
+
+/* fixed rate clocks generated inside the soc */
+struct samsung_fixed_rate_clock exynos5250_fixed_rate_clks[] __initdata = {
+ FRATE(none, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 24000000),
+ FRATE(none, "sclk_hdmi27m", NULL, CLK_IS_ROOT, 27000000),
+ FRATE(none, "sclk_dptxphy", NULL, CLK_IS_ROOT, 24000000),
+ FRATE(none, "sclk_uhostphy", NULL, CLK_IS_ROOT, 48000000),
+};
+
+struct samsung_fixed_factor_clock exynos5250_fixed_factor_clks[] __initdata = {
+ FFACTOR(none, "fout_mplldiv2", "fout_mpll", 1, 2, 0),
+ FFACTOR(none, "fout_bplldiv2", "fout_bpll", 1, 2, 0),
+};
+
+struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
+ MUX(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
+ MUX(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
+ MUX(none, "mout_mpll_fout", mout_mpll_fout_p, PLL_DIV2_SEL, 4, 1),
+ MUX(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1),
+ MUX(none, "mout_bpll_fout", mout_bpll_fout_p, PLL_DIV2_SEL, 0, 1),
+ MUX(none, "sclk_bpll", mout_bpll_p, SRC_CDREX, 0, 1),
+ MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP2, 0, 1),
+ MUX(none, "sclk_vpll", mout_vpll_p, SRC_TOP2, 16, 1),
+ MUX(none, "sclk_epll", mout_epll_p, SRC_TOP2, 12, 1),
+ MUX(none, "sclk_cpll", mout_cpll_p, SRC_TOP2, 8, 1),
+ MUX(none, "sclk_mpll_user", mout_mpll_user_p, SRC_TOP2, 20, 1),
+ MUX(none, "sclk_bpll_user", mout_bpll_user_p, SRC_TOP2, 24, 1),
+ MUX(none, "mout_aclk166", mout_aclk166_p, SRC_TOP0, 8, 1),
+ MUX(none, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1),
+ MUX(none, "mout_aclk200", mout_aclk200_p, SRC_TOP0, 12, 1),
+ MUX(none, "mout_cam_bayer", mout_group1_p, SRC_GSCL, 12, 4),
+ MUX(none, "mout_cam0", mout_group1_p, SRC_GSCL, 16, 4),
+ MUX(none, "mout_cam1", mout_group1_p, SRC_GSCL, 20, 4),
+ MUX(none, "mout_gscl_wa", mout_group1_p, SRC_GSCL, 24, 4),
+ MUX(none, "mout_gscl_wb", mout_group1_p, SRC_GSCL, 28, 4),
+ MUX(none, "mout_fimd1", mout_group1_p, SRC_DISP1_0, 0, 4),
+ MUX(none, "mout_mipi1", mout_group1_p, SRC_DISP1_0, 12, 4),
+ MUX(none, "mout_dp", mout_group1_p, SRC_DISP1_0, 16, 4),
+ MUX(none, "mout_hdmi", mout_hdmi_p, SRC_DISP1_0, 20, 1),
+ MUX(none, "mout_audio0", mout_audio0_p, SRC_MAU, 0, 4),
+ MUX(none, "mout_mmc0", mout_group1_p, SRC_FSYS, 0, 4),
+ MUX(none, "mout_mmc1", mout_group1_p, SRC_FSYS, 4, 4),
+ MUX(none, "mout_mmc2", mout_group1_p, SRC_FSYS, 8, 4),
+ MUX(none, "mout_mmc3", mout_group1_p, SRC_FSYS, 12, 4),
+ MUX(none, "mout_sata", mout_aclk200_p, SRC_FSYS, 24, 1),
+ MUX(none, "mout_usb3", mout_usb3_p, SRC_FSYS, 28, 1),
+ MUX(none, "mout_jpeg", mout_group1_p, SRC_GEN, 0, 4),
+ MUX(none, "mout_uart0", mout_group1_p, SRC_PERIC0, 0, 4),
+ MUX(none, "mout_uart1", mout_group1_p, SRC_PERIC0, 4, 4),
+ MUX(none, "mout_uart2", mout_group1_p, SRC_PERIC0, 8, 4),
+ MUX(none, "mout_uart3", mout_group1_p, SRC_PERIC0, 12, 4),
+ MUX(none, "mout_pwm", mout_group1_p, SRC_PERIC0, 24, 4),
+ MUX(none, "mout_audio1", mout_audio1_p, SRC_PERIC1, 0, 4),
+ MUX(none, "mout_audio2", mout_audio2_p, SRC_PERIC1, 4, 4),
+ MUX(none, "mout_spdif", mout_spdif_p, SRC_PERIC1, 8, 2),
+ MUX(none, "mout_spi0", mout_group1_p, SRC_PERIC1, 16, 4),
+ MUX(none, "mout_spi1", mout_group1_p, SRC_PERIC1, 20, 4),
+ MUX(none, "mout_spi2", mout_group1_p, SRC_PERIC1, 24, 4),
+};
+
+struct samsung_div_clock exynos5250_div_clks[] __initdata = {
+ DIV(none, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
+ DIV(none, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3),
+ DIV(none, "aclk66_pre", "sclk_mpll_user", DIV_TOP1, 24, 3),
+ DIV(none, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3),
+ DIV(none, "aclk266", "sclk_mpll_user", DIV_TOP0, 16, 3),
+ DIV(none, "aclk166", "mout_aclk166", DIV_TOP0, 8, 3),
+ DIV(none, "aclk333", "mout_aclk333", DIV_TOP0, 20, 3),
+ DIV(none, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
+ DIV(none, "div_cam_bayer", "mout_cam_bayer", DIV_GSCL, 12, 4),
+ DIV(none, "div_cam0", "mout_cam0", DIV_GSCL, 16, 4),
+ DIV(none, "div_cam1", "mout_cam1", DIV_GSCL, 20, 4),
+ DIV(none, "div_gscl_wa", "mout_gscl_wa", DIV_GSCL, 24, 4),
+ DIV(none, "div_gscl_wb", "mout_gscl_wb", DIV_GSCL, 28, 4),
+ DIV(none, "div_fimd1", "mout_fimd1", DIV_DISP1_0, 0, 4),
+ DIV(none, "div_mipi1", "mout_mipi1", DIV_DISP1_0, 16, 4),
+ DIV(none, "div_dp", "mout_dp", DIV_DISP1_0, 24, 4),
+ DIV(none, "div_jpeg", "mout_jpeg", DIV_GEN, 4, 4),
+ DIV(none, "div_audio0", "mout_audio0", DIV_MAU, 0, 4),
+ DIV(none, "div_pcm0", "sclk_audio0", DIV_MAU, 4, 8),
+ DIV(none, "div_sata", "mout_sata", DIV_FSYS0, 20, 4),
+ DIV(none, "div_usb3", "mout_usb3", DIV_FSYS0, 24, 4),
+ DIV(none, "div_mmc0", "mout_mmc0", DIV_FSYS1, 8, 8),
+ DIV(none, "div_mmc1", "mout_mmc1", DIV_FSYS1, 24, 8),
+ DIV(none, "div_mmc2", "mout_mmc2", DIV_FSYS2, 8, 8),
+ DIV(none, "div_mmc3", "mout_mmc3", DIV_FSYS2, 24, 8),
+ DIV(none, "div_uart0", "mout_uart0", DIV_PERIC0, 0, 4),
+ DIV(none, "div_uart1", "mout_uart1", DIV_PERIC0, 4, 4),
+ DIV(none, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4),
+ DIV(none, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4),
+ DIV(none, "div_spi0", "mout_spi0", DIV_PERIC1, 0, 4),
+ DIV(none, "div_spi1", "mout_spi1", DIV_PERIC1, 16, 4),
+ DIV(none, "div_spi2", "mout_spi2", DIV_PERIC2, 0, 4),
+ DIV(none, "div_pwm", "mout_pwm", DIV_PERIC3, 0, 4),
+ DIV(none, "div_audio1", "mout_audio1", DIV_PERIC4, 0, 4),
+ DIV(none, "div_pcm1", "sclk_audio1", DIV_PERIC4, 4, 8),
+ DIV(none, "div_audio2", "mout_audio2", DIV_PERIC4, 16, 4),
+ DIV(none, "div_pcm2", "sclk_audio2", DIV_PERIC4, 20, 8),
+ DIV(none, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6),
+ DIV(none, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6),
+ DIV(sclk_pixel, "div_hdmi_pixel", "sclk_vpll", DIV_DISP1_0, 28, 4),
+ DIV_A(none, "armclk", "div_arm", DIV_CPU0, 28, 3, "armclk"),
+ DIV_F(none, "div_mipi1_pre", "div_mipi1",
+ DIV_DISP1_0, 20, 4, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre0", "div_mmc0",
+ DIV_FSYS1, 8, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre1", "div_mmc1",
+ DIV_FSYS1, 24, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre2", "div_mmc2",
+ DIV_FSYS2, 8, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre3", "div_mmc3",
+ DIV_FSYS2, 24, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_spi_pre0", "div_spi0",
+ DIV_PERIC1, 8, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_spi_pre1", "div_spi1",
+ DIV_PERIC1, 24, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_spi_pre2", "div_spi2",
+ DIV_PERIC2, 8, 8, CLK_SET_RATE_PARENT, 0),
+};
+
+struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
+ GATE(gscl0, "gscl0", "none", GATE_IP_GSCL, 0, 0, 0),
+ GATE(gscl1, "gscl1", "none", GATE_IP_GSCL, 1, 0, 0),
+ GATE(gscl2, "gscl2", "aclk266", GATE_IP_GSCL, 2, 0, 0),
+ GATE(gscl3, "gscl3", "aclk266", GATE_IP_GSCL, 3, 0, 0),
+ GATE(gscl_wa, "gscl_wa", "div_gscl_wa", GATE_IP_GSCL, 5, 0, 0),
+ GATE(gscl_wb, "gscl_wb", "div_gscl_wb", GATE_IP_GSCL, 6, 0, 0),
+ GATE(smmu_gscl0, "smmu_gscl0", "aclk266", GATE_IP_GSCL, 7, 0, 0),
+ GATE(smmu_gscl1, "smmu_gscl1", "aclk266", GATE_IP_GSCL, 8, 0, 0),
+ GATE(smmu_gscl2, "smmu_gscl2", "aclk266", GATE_IP_GSCL, 9, 0, 0),
+ GATE(smmu_gscl3, "smmu_gscl3", "aclk266", GATE_IP_GSCL, 10, 0, 0),
+ GATE(mfc, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0),
+ GATE(smmu_mfcl, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0),
+ GATE(smmu_mfcr, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0),
+ GATE(rotator, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0),
+ GATE(jpeg, "jpeg", "aclk166", GATE_IP_GEN, 2, 0, 0),
+ GATE(mdma1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0),
+ GATE(smmu_rotator, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0),
+ GATE(smmu_jpeg, "smmu_jpeg", "aclk166", GATE_IP_GEN, 7, 0, 0),
+ GATE(smmu_mdma1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0),
+ GATE(pdma0, "pdma0", "aclk200", GATE_IP_FSYS, 1, 0, 0),
+ GATE(pdma1, "pdma1", "aclk200", GATE_IP_FSYS, 2, 0, 0),
+ GATE(sata, "sata", "aclk200", GATE_IP_FSYS, 6, 0, 0),
+ GATE(usbotg, "usbotg", "aclk200", GATE_IP_FSYS, 7, 0, 0),
+ GATE(mipi_hsi, "mipi_hsi", "aclk200", GATE_IP_FSYS, 8, 0, 0),
+ GATE(sdmmc0, "sdmmc0", "aclk200", GATE_IP_FSYS, 12, 0, 0),
+ GATE(sdmmc1, "sdmmc1", "aclk200", GATE_IP_FSYS, 13, 0, 0),
+ GATE(sdmmc2, "sdmmc2", "aclk200", GATE_IP_FSYS, 14, 0, 0),
+ GATE(sdmmc3, "sdmmc3", "aclk200", GATE_IP_FSYS, 15, 0, 0),
+ GATE(sromc, "sromc", "aclk200", GATE_IP_FSYS, 17, 0, 0),
+ GATE(usb2, "usb2", "aclk200", GATE_IP_FSYS, 18, 0, 0),
+ GATE(usb3, "usb3", "aclk200", GATE_IP_FSYS, 19, 0, 0),
+ GATE(sata_phyctrl, "sata_phyctrl", "aclk200", GATE_IP_FSYS, 24, 0, 0),
+ GATE(sata_phyi2c, "sata_phyi2c", "aclk200", GATE_IP_FSYS, 25, 0, 0),
+ GATE(uart0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0),
+ GATE(uart1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0),
+ GATE(uart2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0),
+ GATE(uart3, "uart3", "aclk66", GATE_IP_PERIC, 3, 0, 0),
+ GATE(uart4, "uart4", "aclk66", GATE_IP_PERIC, 4, 0, 0),
+ GATE(i2c0, "i2c0", "aclk66", GATE_IP_PERIC, 6, 0, 0),
+ GATE(i2c1, "i2c1", "aclk66", GATE_IP_PERIC, 7, 0, 0),
+ GATE(i2c2, "i2c2", "aclk66", GATE_IP_PERIC, 8, 0, 0),
+ GATE(i2c3, "i2c3", "aclk66", GATE_IP_PERIC, 9, 0, 0),
+ GATE(i2c4, "i2c4", "aclk66", GATE_IP_PERIC, 10, 0, 0),
+ GATE(i2c5, "i2c5", "aclk66", GATE_IP_PERIC, 11, 0, 0),
+ GATE(i2c6, "i2c6", "aclk66", GATE_IP_PERIC, 12, 0, 0),
+ GATE(i2c7, "i2c7", "aclk66", GATE_IP_PERIC, 13, 0, 0),
+ GATE(i2c_hdmi, "i2c_hdmi", "aclk66", GATE_IP_PERIC, 14, 0, 0),
+ GATE(adc, "adc", "aclk66", GATE_IP_PERIC, 15, 0, 0),
+ GATE(spi0, "spi0", "aclk66", GATE_IP_PERIC, 16, 0, 0),
+ GATE(spi1, "spi1", "aclk66", GATE_IP_PERIC, 17, 0, 0),
+ GATE(spi2, "spi2", "aclk66", GATE_IP_PERIC, 18, 0, 0),
+ GATE(i2s1, "i2s1", "aclk66", GATE_IP_PERIC, 20, 0, 0),
+ GATE(i2s2, "i2s2", "aclk66", GATE_IP_PERIC, 21, 0, 0),
+ GATE(pcm1, "pcm1", "aclk66", GATE_IP_PERIC, 22, 0, 0),
+ GATE(pcm2, "pcm2", "aclk66", GATE_IP_PERIC, 23, 0, 0),
+ GATE(pwm, "pwm", "aclk66", GATE_IP_PERIC, 24, 0, 0),
+ GATE(spdif, "spdif", "aclk66", GATE_IP_PERIC, 26, 0, 0),
+ GATE(ac97, "ac97", "aclk66", GATE_IP_PERIC, 27, 0, 0),
+ GATE(hsi2c0, "hsi2c0", "aclk66", GATE_IP_PERIC, 28, 0, 0),
+ GATE(hsi2c1, "hsi2c1", "aclk66", GATE_IP_PERIC, 29, 0, 0),
+ GATE(hsi2c2, "hsi2c2", "aclk66", GATE_IP_PERIC, 30, 0, 0),
+ GATE(hsi2c3, "hsi2c3", "aclk66", GATE_IP_PERIC, 31, 0, 0),
+ GATE(chipid, "chipid", "aclk66", GATE_IP_PERIS, 0, 0, 0),
+ GATE(sysreg, "sysreg", "aclk66", GATE_IP_PERIS, 1, 0, 0),
+ GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, 0, 0),
+ GATE(tzpc0, "tzpc0", "aclk66", GATE_IP_PERIS, 6, 0, 0),
+ GATE(tzpc1, "tzpc1", "aclk66", GATE_IP_PERIS, 7, 0, 0),
+ GATE(tzpc2, "tzpc2", "aclk66", GATE_IP_PERIS, 8, 0, 0),
+ GATE(tzpc3, "tzpc3", "aclk66", GATE_IP_PERIS, 9, 0, 0),
+ GATE(tzpc4, "tzpc4", "aclk66", GATE_IP_PERIS, 10, 0, 0),
+ GATE(tzpc5, "tzpc5", "aclk66", GATE_IP_PERIS, 11, 0, 0),
+ GATE(tzpc6, "tzpc6", "aclk66", GATE_IP_PERIS, 12, 0, 0),
+ GATE(tzpc7, "tzpc7", "aclk66", GATE_IP_PERIS, 13, 0, 0),
+ GATE(tzpc8, "tzpc8", "aclk66", GATE_IP_PERIS, 14, 0, 0),
+ GATE(tzpc9, "tzpc9", "aclk66", GATE_IP_PERIS, 15, 0, 0),
+ GATE(hdmi_cec, "hdmi_cec", "aclk66", GATE_IP_PERIS, 16, 0, 0),
+ GATE(mct, "mct", "aclk66", GATE_IP_PERIS, 18, 0, 0),
+ GATE(wdt, "wdt", "aclk66", GATE_IP_PERIS, 19, 0, 0),
+ GATE(rtc, "rtc", "aclk66", GATE_IP_PERIS, 20, 0, 0),
+ GATE(tmu, "tmu", "aclk66", GATE_IP_PERIS, 21, 0, 0),
+ GATE(cmu_top, "cmu_top", "aclk66",
+ GATE_IP_PERIS, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(cmu_core, "cmu_core", "aclk66",
+ GATE_IP_PERIS, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(cmu_mem, "cmu_mem", "aclk66",
+ GATE_IP_PERIS, 5, CLK_IGNORE_UNUSED, 0),
+ GATE(sclk_cam_bayer, "sclk_cam_bayer", "div_cam_bayer",
+ SRC_MASK_GSCL, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_cam0, "sclk_cam0", "div_cam0",
+ SRC_MASK_GSCL, 16, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_cam1, "sclk_cam1", "div_cam1",
+ SRC_MASK_GSCL, 20, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_gscl_wa, "sclk_gscl_wa", "div_gscl_wa",
+ SRC_MASK_GSCL, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_gscl_wb, "sclk_gscl_wb", "div_gscl_wb",
+ SRC_MASK_GSCL, 28, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_fimd1, "sclk_fimd1", "div_fimd1",
+ SRC_MASK_DISP1_0, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mipi1, "sclk_mipi1", "div_mipi1",
+ SRC_MASK_DISP1_0, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_dp, "sclk_dp", "div_dp",
+ SRC_MASK_DISP1_0, 16, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_hdmi, "sclk_hdmi", "mout_hdmi",
+ SRC_MASK_DISP1_0, 20, 0, 0),
+ GATE(sclk_audio0, "sclk_audio0", "div_audio0",
+ SRC_MASK_MAU, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mmc0, "sclk_mmc0", "div_mmc0",
+ SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mmc1, "sclk_mmc1", "div_mmc1",
+ SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mmc2, "sclk_mmc2", "div_mmc2",
+ SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mmc3, "sclk_mmc3", "div_mmc3",
+ SRC_MASK_FSYS, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_sata, "sclk_sata", "div_sata",
+ SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_usb3, "sclk_usb3", "div_usb3",
+ SRC_MASK_FSYS, 28, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_jpeg, "sclk_jpeg", "div_jpeg",
+ SRC_MASK_GEN, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_uart0, "sclk_uart0", "div_uart0",
+ SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_uart1, "sclk_uart1", "div_uart1",
+ SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_uart2, "sclk_uart2", "div_uart2",
+ SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_uart3, "sclk_uart3", "div_uart3",
+ SRC_MASK_PERIC0, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_pwm, "sclk_pwm", "div_pwm",
+ SRC_MASK_PERIC0, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_audio1, "sclk_audio1", "div_audio1",
+ SRC_MASK_PERIC1, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_audio2, "sclk_audio2", "div_audio2",
+ SRC_MASK_PERIC1, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_spdif, "sclk_spdif", "mout_spdif",
+ SRC_MASK_PERIC1, 4, 0, 0),
+ GATE(sclk_spi0, "sclk_spi0", "div_spi_pre0",
+ SRC_MASK_PERIC1, 16, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_spi1, "sclk_spi1", "div_spi_pre1",
+ SRC_MASK_PERIC1, 20, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_spi2, "sclk_spi2", "div_spi_pre2",
+ SRC_MASK_PERIC1, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(fimd1, "fimd1", "aclk200", GATE_IP_DISP1, 0, 0, 0),
+ GATE(mie1, "mie1", "aclk200", GATE_IP_DISP1, 1, 0, 0),
+ GATE(dsim0, "dsim0", "aclk200", GATE_IP_DISP1, 3, 0, 0),
+ GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
+ GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
+ GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
+};
+
+static __initdata struct of_device_id ext_clk_match[] = {
+ { .compatible = "samsung,clock-xxti", .data = (void *)0, },
+ { },
+};
+
+/* register exynox5250 clocks */
+void __init exynos5250_clk_init(struct device_node *np)
+{
+ void __iomem *reg_base;
+ struct clk *apll, *mpll, *epll, *vpll, *bpll, *gpll, *cpll;
+
+ if (np) {
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+ } else {
+ panic("%s: unable to determine soc\n", __func__);
+ }
+
+ samsung_clk_init(np, reg_base, nr_clks,
+ exynos5250_clk_regs, ARRAY_SIZE(exynos5250_clk_regs),
+ NULL, 0);
+ samsung_clk_of_register_fixed_ext(exynos5250_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos5250_fixed_rate_ext_clks),
+ ext_clk_match);
+
+ apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll",
+ reg_base + 0x100);
+ mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll",
+ reg_base + 0x4100);
+ bpll = samsung_clk_register_pll35xx("fout_bpll", "fin_pll",
+ reg_base + 0x20110);
+ gpll = samsung_clk_register_pll35xx("fout_gpll", "fin_pll",
+ reg_base + 0x10150);
+ cpll = samsung_clk_register_pll35xx("fout_cpll", "fin_pll",
+ reg_base + 0x10120);
+ epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll",
+ reg_base + 0x10130);
+ vpll = samsung_clk_register_pll36xx("fout_vpll", "mout_vpllsrc",
+ reg_base + 0x10140);
+
+ samsung_clk_register_fixed_rate(exynos5250_fixed_rate_clks,
+ ARRAY_SIZE(exynos5250_fixed_rate_clks));
+ samsung_clk_register_fixed_factor(exynos5250_fixed_factor_clks,
+ ARRAY_SIZE(exynos5250_fixed_factor_clks));
+ samsung_clk_register_mux(exynos5250_mux_clks,
+ ARRAY_SIZE(exynos5250_mux_clks));
+ samsung_clk_register_div(exynos5250_div_clks,
+ ARRAY_SIZE(exynos5250_div_clks));
+ samsung_clk_register_gate(exynos5250_gate_clks,
+ ARRAY_SIZE(exynos5250_gate_clks));
+
+ pr_info("Exynos5250: clock setup completed, armclk=%ld\n",
+ _get_rate("armclk"));
+}
+CLK_OF_DECLARE(exynos5250_clk, "samsung,exynos5250-clock", exynos5250_clk_init);
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5440 SoC.
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define CLKEN_OV_VAL 0xf8
+#define CPU_CLK_STATUS 0xfc
+#define MISC_DOUT1 0x558
+
+/*
+ * Let each supported clock get a unique id. This id is used to lookup the clock
+ * for device tree based platforms.
+ */
+enum exynos5440_clks {
+ none, xtal, arm_clk,
+
+ spi_baud = 16, pb0_250, pr0_250, pr1_250, b_250, b_125, b_200, sata,
+ usb, gmac0, cs250, pb0_250_o, pr0_250_o, pr1_250_o, b_250_o, b_125_o,
+ b_200_o, sata_o, usb_o, gmac0_o, cs250_o,
+
+ nr_clks,
+};
+
+/* parent clock name list */
+PNAME(mout_armclk_p) = { "cplla", "cpllb" };
+PNAME(mout_spi_p) = { "div125", "div200" };
+
+/* fixed rate clocks generated outside the soc */
+struct samsung_fixed_rate_clock exynos5440_fixed_rate_ext_clks[] __initdata = {
+ FRATE(none, "xtal", NULL, CLK_IS_ROOT, 0),
+};
+
+/* fixed rate clocks */
+struct samsung_fixed_rate_clock exynos5440_fixed_rate_clks[] __initdata = {
+ FRATE(none, "ppll", NULL, CLK_IS_ROOT, 1000000000),
+ FRATE(none, "usb_phy0", NULL, CLK_IS_ROOT, 60000000),
+ FRATE(none, "usb_phy1", NULL, CLK_IS_ROOT, 60000000),
+ FRATE(none, "usb_ohci12", NULL, CLK_IS_ROOT, 12000000),
+ FRATE(none, "usb_ohci48", NULL, CLK_IS_ROOT, 48000000),
+};
+
+/* fixed factor clocks */
+struct samsung_fixed_factor_clock exynos5440_fixed_factor_clks[] __initdata = {
+ FFACTOR(none, "div250", "ppll", 1, 4, 0),
+ FFACTOR(none, "div200", "ppll", 1, 5, 0),
+ FFACTOR(none, "div125", "div250", 1, 2, 0),
+};
+
+/* mux clocks */
+struct samsung_mux_clock exynos5440_mux_clks[] __initdata = {
+ MUX(none, "mout_spi", mout_spi_p, MISC_DOUT1, 5, 1),
+ MUX_A(arm_clk, "arm_clk", mout_armclk_p,
+ CPU_CLK_STATUS, 0, 1, "armclk"),
+};
+
+/* divider clocks */
+struct samsung_div_clock exynos5440_div_clks[] __initdata = {
+ DIV(spi_baud, "div_spi", "mout_spi", MISC_DOUT1, 3, 2),
+};
+
+/* gate clocks */
+struct samsung_gate_clock exynos5440_gate_clks[] __initdata = {
+ GATE(pb0_250, "pb0_250", "div250", CLKEN_OV_VAL, 3, 0, 0),
+ GATE(pr0_250, "pr0_250", "div250", CLKEN_OV_VAL, 4, 0, 0),
+ GATE(pr1_250, "pr1_250", "div250", CLKEN_OV_VAL, 5, 0, 0),
+ GATE(b_250, "b_250", "div250", CLKEN_OV_VAL, 9, 0, 0),
+ GATE(b_125, "b_125", "div125", CLKEN_OV_VAL, 10, 0, 0),
+ GATE(b_200, "b_200", "div200", CLKEN_OV_VAL, 11, 0, 0),
+ GATE(sata, "sata", "div200", CLKEN_OV_VAL, 12, 0, 0),
+ GATE(usb, "usb", "div200", CLKEN_OV_VAL, 13, 0, 0),
+ GATE(gmac0, "gmac0", "div200", CLKEN_OV_VAL, 14, 0, 0),
+ GATE(cs250, "cs250", "div250", CLKEN_OV_VAL, 19, 0, 0),
+ GATE(pb0_250_o, "pb0_250_o", "pb0_250", CLKEN_OV_VAL, 3, 0, 0),
+ GATE(pr0_250_o, "pr0_250_o", "pr0_250", CLKEN_OV_VAL, 4, 0, 0),
+ GATE(pr1_250_o, "pr1_250_o", "pr1_250", CLKEN_OV_VAL, 5, 0, 0),
+ GATE(b_250_o, "b_250_o", "b_250", CLKEN_OV_VAL, 9, 0, 0),
+ GATE(b_125_o, "b_125_o", "b_125", CLKEN_OV_VAL, 10, 0, 0),
+ GATE(b_200_o, "b_200_o", "b_200", CLKEN_OV_VAL, 11, 0, 0),
+ GATE(sata_o, "sata_o", "sata", CLKEN_OV_VAL, 12, 0, 0),
+ GATE(usb_o, "usb_o", "usb", CLKEN_OV_VAL, 13, 0, 0),
+ GATE(gmac0_o, "gmac0_o", "gmac", CLKEN_OV_VAL, 14, 0, 0),
+ GATE(cs250_o, "cs250_o", "cs250", CLKEN_OV_VAL, 19, 0, 0),
+};
+
+static __initdata struct of_device_id ext_clk_match[] = {
+ { .compatible = "samsung,clock-xtal", .data = (void *)0, },
+ {},
+};
+
+/* register exynos5440 clocks */
+void __init exynos5440_clk_init(struct device_node *np)
+{
+ void __iomem *reg_base;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base) {
+ pr_err("%s: failed to map clock controller registers,"
+ " aborting clock initialization\n", __func__);
+ return;
+ }
+
+ samsung_clk_init(np, reg_base, nr_clks, NULL, 0, NULL, 0);
+ samsung_clk_of_register_fixed_ext(exynos5440_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match);
+
+ samsung_clk_register_pll2550x("cplla", "xtal", reg_base + 0x1c, 0x10);
+ samsung_clk_register_pll2550x("cpllb", "xtal", reg_base + 0x20, 0x10);
+
+ samsung_clk_register_fixed_rate(exynos5440_fixed_rate_clks,
+ ARRAY_SIZE(exynos5440_fixed_rate_clks));
+ samsung_clk_register_fixed_factor(exynos5440_fixed_factor_clks,
+ ARRAY_SIZE(exynos5440_fixed_factor_clks));
+ samsung_clk_register_mux(exynos5440_mux_clks,
+ ARRAY_SIZE(exynos5440_mux_clks));
+ samsung_clk_register_div(exynos5440_div_clks,
+ ARRAY_SIZE(exynos5440_div_clks));
+ samsung_clk_register_gate(exynos5440_gate_clks,
+ ARRAY_SIZE(exynos5440_gate_clks));
+
+ pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("armclk"));
+ pr_info("exynos5440 clock initialization complete\n");
+}
+CLK_OF_DECLARE(exynos5440_clk, "samsung,exynos5440-clock", exynos5440_clk_init);
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the utility functions to register the pll clocks.
+*/
+
+#include <linux/errno.h>
+#include "clk.h"
+#include "clk-pll.h"
+
+/*
+ * PLL35xx Clock Type
+ */
+
+#define PLL35XX_MDIV_MASK (0x3FF)
+#define PLL35XX_PDIV_MASK (0x3F)
+#define PLL35XX_SDIV_MASK (0x7)
+#define PLL35XX_MDIV_SHIFT (16)
+#define PLL35XX_PDIV_SHIFT (8)
+#define PLL35XX_SDIV_SHIFT (0)
+
+struct samsung_clk_pll35xx {
+ struct clk_hw hw;
+ const void __iomem *con_reg;
+};
+
+#define to_clk_pll35xx(_hw) container_of(_hw, struct samsung_clk_pll35xx, hw)
+
+static unsigned long samsung_pll35xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll35xx *pll = to_clk_pll35xx(hw);
+ u32 mdiv, pdiv, sdiv, pll_con;
+ u64 fvco = parent_rate;
+
+ pll_con = __raw_readl(pll->con_reg);
+ mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll35xx_clk_ops = {
+ .recalc_rate = samsung_pll35xx_recalc_rate,
+};
+
+struct clk * __init samsung_clk_register_pll35xx(const char *name,
+ const char *pname, const void __iomem *con_reg)
+{
+ struct samsung_clk_pll35xx *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("%s: could not allocate pll clk %s\n", __func__, name);
+ return NULL;
+ }
+
+ init.name = name;
+ init.ops = &samsung_pll35xx_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+ init.parent_names = &pname;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+ pll->con_reg = con_reg;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register pll clock %s\n", __func__,
+ name);
+ kfree(pll);
+ }
+
+ if (clk_register_clkdev(clk, name, NULL))
+ pr_err("%s: failed to register lookup for %s", __func__, name);
+
+ return clk;
+}
+
+/*
+ * PLL36xx Clock Type
+ */
+
+#define PLL36XX_KDIV_MASK (0xFFFF)
+#define PLL36XX_MDIV_MASK (0x1FF)
+#define PLL36XX_PDIV_MASK (0x3F)
+#define PLL36XX_SDIV_MASK (0x7)
+#define PLL36XX_MDIV_SHIFT (16)
+#define PLL36XX_PDIV_SHIFT (8)
+#define PLL36XX_SDIV_SHIFT (0)
+
+struct samsung_clk_pll36xx {
+ struct clk_hw hw;
+ const void __iomem *con_reg;
+};
+
+#define to_clk_pll36xx(_hw) container_of(_hw, struct samsung_clk_pll36xx, hw)
+
+static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll36xx *pll = to_clk_pll36xx(hw);
+ u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1;
+ u64 fvco = parent_rate;
+
+ pll_con0 = __raw_readl(pll->con_reg);
+ pll_con1 = __raw_readl(pll->con_reg + 4);
+ mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+ kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+ fvco *= (mdiv << 16) + kdiv;
+ do_div(fvco, (pdiv << sdiv));
+ fvco >>= 16;
+
+ return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll36xx_clk_ops = {
+ .recalc_rate = samsung_pll36xx_recalc_rate,
+};
+
+struct clk * __init samsung_clk_register_pll36xx(const char *name,
+ const char *pname, const void __iomem *con_reg)
+{
+ struct samsung_clk_pll36xx *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("%s: could not allocate pll clk %s\n", __func__, name);
+ return NULL;
+ }
+
+ init.name = name;
+ init.ops = &samsung_pll36xx_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+ init.parent_names = &pname;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+ pll->con_reg = con_reg;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register pll clock %s\n", __func__,
+ name);
+ kfree(pll);
+ }
+
+ if (clk_register_clkdev(clk, name, NULL))
+ pr_err("%s: failed to register lookup for %s", __func__, name);
+
+ return clk;
+}
+
+/*
+ * PLL45xx Clock Type
+ */
+
+#define PLL45XX_MDIV_MASK (0x3FF)
+#define PLL45XX_PDIV_MASK (0x3F)
+#define PLL45XX_SDIV_MASK (0x7)
+#define PLL45XX_MDIV_SHIFT (16)
+#define PLL45XX_PDIV_SHIFT (8)
+#define PLL45XX_SDIV_SHIFT (0)
+
+struct samsung_clk_pll45xx {
+ struct clk_hw hw;
+ enum pll45xx_type type;
+ const void __iomem *con_reg;
+};
+
+#define to_clk_pll45xx(_hw) container_of(_hw, struct samsung_clk_pll45xx, hw)
+
+static unsigned long samsung_pll45xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll45xx *pll = to_clk_pll45xx(hw);
+ u32 mdiv, pdiv, sdiv, pll_con;
+ u64 fvco = parent_rate;
+
+ pll_con = __raw_readl(pll->con_reg);
+ mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
+
+ if (pll->type == pll_4508)
+ sdiv = sdiv - 1;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll45xx_clk_ops = {
+ .recalc_rate = samsung_pll45xx_recalc_rate,
+};
+
+struct clk * __init samsung_clk_register_pll45xx(const char *name,
+ const char *pname, const void __iomem *con_reg,
+ enum pll45xx_type type)
+{
+ struct samsung_clk_pll45xx *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("%s: could not allocate pll clk %s\n", __func__, name);
+ return NULL;
+ }
+
+ init.name = name;
+ init.ops = &samsung_pll45xx_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+ init.parent_names = &pname;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+ pll->con_reg = con_reg;
+ pll->type = type;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register pll clock %s\n", __func__,
+ name);
+ kfree(pll);
+ }
+
+ if (clk_register_clkdev(clk, name, NULL))
+ pr_err("%s: failed to register lookup for %s", __func__, name);
+
+ return clk;
+}
+
+/*
+ * PLL46xx Clock Type
+ */
+
+#define PLL46XX_MDIV_MASK (0x1FF)
+#define PLL46XX_PDIV_MASK (0x3F)
+#define PLL46XX_SDIV_MASK (0x7)
+#define PLL46XX_MDIV_SHIFT (16)
+#define PLL46XX_PDIV_SHIFT (8)
+#define PLL46XX_SDIV_SHIFT (0)
+
+#define PLL46XX_KDIV_MASK (0xFFFF)
+#define PLL4650C_KDIV_MASK (0xFFF)
+#define PLL46XX_KDIV_SHIFT (0)
+
+struct samsung_clk_pll46xx {
+ struct clk_hw hw;
+ enum pll46xx_type type;
+ const void __iomem *con_reg;
+};
+
+#define to_clk_pll46xx(_hw) container_of(_hw, struct samsung_clk_pll46xx, hw)
+
+static unsigned long samsung_pll46xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll46xx *pll = to_clk_pll46xx(hw);
+ u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1, shift;
+ u64 fvco = parent_rate;
+
+ pll_con0 = __raw_readl(pll->con_reg);
+ pll_con1 = __raw_readl(pll->con_reg + 4);
+ mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
+ kdiv = pll->type == pll_4650c ? pll_con1 & PLL4650C_KDIV_MASK :
+ pll_con1 & PLL46XX_KDIV_MASK;
+
+ shift = pll->type == pll_4600 ? 16 : 10;
+ fvco *= (mdiv << shift) + kdiv;
+ do_div(fvco, (pdiv << sdiv));
+ fvco >>= shift;
+
+ return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll46xx_clk_ops = {
+ .recalc_rate = samsung_pll46xx_recalc_rate,
+};
+
+struct clk * __init samsung_clk_register_pll46xx(const char *name,
+ const char *pname, const void __iomem *con_reg,
+ enum pll46xx_type type)
+{
+ struct samsung_clk_pll46xx *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("%s: could not allocate pll clk %s\n", __func__, name);
+ return NULL;
+ }
+
+ init.name = name;
+ init.ops = &samsung_pll46xx_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+ init.parent_names = &pname;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+ pll->con_reg = con_reg;
+ pll->type = type;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register pll clock %s\n", __func__,
+ name);
+ kfree(pll);
+ }
+
+ if (clk_register_clkdev(clk, name, NULL))
+ pr_err("%s: failed to register lookup for %s", __func__, name);
+
+ return clk;
+}
+
+/*
+ * PLL2550x Clock Type
+ */
+
+#define PLL2550X_R_MASK (0x1)
+#define PLL2550X_P_MASK (0x3F)
+#define PLL2550X_M_MASK (0x3FF)
+#define PLL2550X_S_MASK (0x7)
+#define PLL2550X_R_SHIFT (20)
+#define PLL2550X_P_SHIFT (14)
+#define PLL2550X_M_SHIFT (4)
+#define PLL2550X_S_SHIFT (0)
+
+struct samsung_clk_pll2550x {
+ struct clk_hw hw;
+ const void __iomem *reg_base;
+ unsigned long offset;
+};
+
+#define to_clk_pll2550x(_hw) container_of(_hw, struct samsung_clk_pll2550x, hw)
+
+static unsigned long samsung_pll2550x_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll2550x *pll = to_clk_pll2550x(hw);
+ u32 r, p, m, s, pll_stat;
+ u64 fvco = parent_rate;
+
+ pll_stat = __raw_readl(pll->reg_base + pll->offset * 3);
+ r = (pll_stat >> PLL2550X_R_SHIFT) & PLL2550X_R_MASK;
+ if (!r)
+ return 0;
+ p = (pll_stat >> PLL2550X_P_SHIFT) & PLL2550X_P_MASK;
+ m = (pll_stat >> PLL2550X_M_SHIFT) & PLL2550X_M_MASK;
+ s = (pll_stat >> PLL2550X_S_SHIFT) & PLL2550X_S_MASK;
+
+ fvco *= m;
+ do_div(fvco, (p << s));
+
+ return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll2550x_clk_ops = {
+ .recalc_rate = samsung_pll2550x_recalc_rate,
+};
+
+struct clk * __init samsung_clk_register_pll2550x(const char *name,
+ const char *pname, const void __iomem *reg_base,
+ const unsigned long offset)
+{
+ struct samsung_clk_pll2550x *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("%s: could not allocate pll clk %s\n", __func__, name);
+ return NULL;
+ }
+
+ init.name = name;
+ init.ops = &samsung_pll2550x_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+ init.parent_names = &pname;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+ pll->reg_base = reg_base;
+ pll->offset = offset;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register pll clock %s\n", __func__,
+ name);
+ kfree(pll);
+ }
+
+ if (clk_register_clkdev(clk, name, NULL))
+ pr_err("%s: failed to register lookup for %s", __func__, name);
+
+ return clk;
+}
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for all PLL's in Samsung platforms
+*/
+
+#ifndef __SAMSUNG_CLK_PLL_H
+#define __SAMSUNG_CLK_PLL_H
+
+enum pll45xx_type {
+ pll_4500,
+ pll_4502,
+ pll_4508
+};
+
+enum pll46xx_type {
+ pll_4600,
+ pll_4650,
+ pll_4650c,
+};
+
+extern struct clk * __init samsung_clk_register_pll35xx(const char *name,
+ const char *pname, const void __iomem *con_reg);
+extern struct clk * __init samsung_clk_register_pll36xx(const char *name,
+ const char *pname, const void __iomem *con_reg);
+extern struct clk * __init samsung_clk_register_pll45xx(const char *name,
+ const char *pname, const void __iomem *con_reg,
+ enum pll45xx_type type);
+extern struct clk * __init samsung_clk_register_pll46xx(const char *name,
+ const char *pname, const void __iomem *con_reg,
+ enum pll46xx_type type);
+extern struct clk * __init samsung_clk_register_pll2550x(const char *name,
+ const char *pname, const void __iomem *reg_base,
+ const unsigned long offset);
+
+#endif /* __SAMSUNG_CLK_PLL_H */
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file includes utility functions to register clocks to common
+ * clock framework for Samsung platforms.
+*/
+
+#include <linux/syscore_ops.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(lock);
+static struct clk **clk_table;
+static void __iomem *reg_base;
+#ifdef CONFIG_OF
+static struct clk_onecell_data clk_data;
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *reg_dump;
+static unsigned long nr_reg_dump;
+
+static int samsung_clk_suspend(void)
+{
+ struct samsung_clk_reg_dump *rd = reg_dump;
+ unsigned long i;
+
+ for (i = 0; i < nr_reg_dump; i++, rd++)
+ rd->value = __raw_readl(reg_base + rd->offset);
+
+ return 0;
+}
+
+static void samsung_clk_resume(void)
+{
+ struct samsung_clk_reg_dump *rd = reg_dump;
+ unsigned long i;
+
+ for (i = 0; i < nr_reg_dump; i++, rd++)
+ __raw_writel(rd->value, reg_base + rd->offset);
+}
+
+static struct syscore_ops samsung_clk_syscore_ops = {
+ .suspend = samsung_clk_suspend,
+ .resume = samsung_clk_resume,
+};
+#endif /* CONFIG_PM_SLEEP */
+
+/* setup the essentials required to support clock lookup using ccf */
+void __init samsung_clk_init(struct device_node *np, void __iomem *base,
+ unsigned long nr_clks, unsigned long *rdump,
+ unsigned long nr_rdump, unsigned long *soc_rdump,
+ unsigned long nr_soc_rdump)
+{
+ reg_base = base;
+
+#ifdef CONFIG_PM_SLEEP
+ if (rdump && nr_rdump) {
+ unsigned int idx;
+ reg_dump = kzalloc(sizeof(struct samsung_clk_reg_dump)
+ * (nr_rdump + nr_soc_rdump), GFP_KERNEL);
+ if (!reg_dump) {
+ pr_err("%s: memory alloc for register dump failed\n",
+ __func__);
+ return;
+ }
+
+ for (idx = 0; idx < nr_rdump; idx++)
+ reg_dump[idx].offset = rdump[idx];
+ for (idx = 0; idx < nr_soc_rdump; idx++)
+ reg_dump[nr_rdump + idx].offset = soc_rdump[idx];
+ nr_reg_dump = nr_rdump + nr_soc_rdump;
+ register_syscore_ops(&samsung_clk_syscore_ops);
+ }
+#endif
+
+ clk_table = kzalloc(sizeof(struct clk *) * nr_clks, GFP_KERNEL);
+ if (!clk_table)
+ panic("could not allocate clock lookup table\n");
+
+ if (!np)
+ return;
+
+#ifdef CONFIG_OF
+ clk_data.clks = clk_table;
+ clk_data.clk_num = nr_clks;
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+#endif
+}
+
+/* add a clock instance to the clock lookup table used for dt based lookup */
+void samsung_clk_add_lookup(struct clk *clk, unsigned int id)
+{
+ if (clk_table && id)
+ clk_table[id] = clk;
+}
+
+/* register a list of aliases */
+void __init samsung_clk_register_alias(struct samsung_clock_alias *list,
+ unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx, ret;
+
+ if (!clk_table) {
+ pr_err("%s: clock table missing\n", __func__);
+ return;
+ }
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ if (!list->id) {
+ pr_err("%s: clock id missing for index %d\n", __func__,
+ idx);
+ continue;
+ }
+
+ clk = clk_table[list->id];
+ if (!clk) {
+ pr_err("%s: failed to find clock %d\n", __func__,
+ list->id);
+ continue;
+ }
+
+ ret = clk_register_clkdev(clk, list->alias, list->dev_name);
+ if (ret)
+ pr_err("%s: failed to register lookup %s\n",
+ __func__, list->alias);
+ }
+}
+
+/* register a list of fixed clocks */
+void __init samsung_clk_register_fixed_rate(
+ struct samsung_fixed_rate_clock *list, unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx, ret;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ clk = clk_register_fixed_rate(NULL, list->name,
+ list->parent_name, list->flags, list->fixed_rate);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n", __func__,
+ list->name);
+ continue;
+ }
+
+ samsung_clk_add_lookup(clk, list->id);
+
+ /*
+ * Unconditionally add a clock lookup for the fixed rate clocks.
+ * There are not many of these on any of Samsung platforms.
+ */
+ ret = clk_register_clkdev(clk, list->name, NULL);
+ if (ret)
+ pr_err("%s: failed to register clock lookup for %s",
+ __func__, list->name);
+ }
+}
+
+/* register a list of fixed factor clocks */
+void __init samsung_clk_register_fixed_factor(
+ struct samsung_fixed_factor_clock *list, unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ clk = clk_register_fixed_factor(NULL, list->name,
+ list->parent_name, list->flags, list->mult, list->div);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n", __func__,
+ list->name);
+ continue;
+ }
+
+ samsung_clk_add_lookup(clk, list->id);
+ }
+}
+
+/* register a list of mux clocks */
+void __init samsung_clk_register_mux(struct samsung_mux_clock *list,
+ unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx, ret;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ clk = clk_register_mux(NULL, list->name, list->parent_names,
+ list->num_parents, list->flags, reg_base + list->offset,
+ list->shift, list->width, list->mux_flags, &lock);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n", __func__,
+ list->name);
+ continue;
+ }
+
+ samsung_clk_add_lookup(clk, list->id);
+
+ /* register a clock lookup only if a clock alias is specified */
+ if (list->alias) {
+ ret = clk_register_clkdev(clk, list->alias,
+ list->dev_name);
+ if (ret)
+ pr_err("%s: failed to register lookup %s\n",
+ __func__, list->alias);
+ }
+ }
+}
+
+/* register a list of div clocks */
+void __init samsung_clk_register_div(struct samsung_div_clock *list,
+ unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx, ret;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ if (list->table)
+ clk = clk_register_divider_table(NULL, list->name,
+ list->parent_name, list->flags,
+ reg_base + list->offset, list->shift,
+ list->width, list->div_flags,
+ list->table, &lock);
+ else
+ clk = clk_register_divider(NULL, list->name,
+ list->parent_name, list->flags,
+ reg_base + list->offset, list->shift,
+ list->width, list->div_flags, &lock);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n", __func__,
+ list->name);
+ continue;
+ }
+
+ samsung_clk_add_lookup(clk, list->id);
+
+ /* register a clock lookup only if a clock alias is specified */
+ if (list->alias) {
+ ret = clk_register_clkdev(clk, list->alias,
+ list->dev_name);
+ if (ret)
+ pr_err("%s: failed to register lookup %s\n",
+ __func__, list->alias);
+ }
+ }
+}
+
+/* register a list of gate clocks */
+void __init samsung_clk_register_gate(struct samsung_gate_clock *list,
+ unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx, ret;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ clk = clk_register_gate(NULL, list->name, list->parent_name,
+ list->flags, reg_base + list->offset,
+ list->bit_idx, list->gate_flags, &lock);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n", __func__,
+ list->name);
+ continue;
+ }
+
+ /* register a clock lookup only if a clock alias is specified */
+ if (list->alias) {
+ ret = clk_register_clkdev(clk, list->alias,
+ list->dev_name);
+ if (ret)
+ pr_err("%s: failed to register lookup %s\n",
+ __func__, list->alias);
+ }
+
+ samsung_clk_add_lookup(clk, list->id);
+ }
+}
+
+/*
+ * obtain the clock speed of all external fixed clock sources from device
+ * tree and register it
+ */
+#ifdef CONFIG_OF
+void __init samsung_clk_of_register_fixed_ext(
+ struct samsung_fixed_rate_clock *fixed_rate_clk,
+ unsigned int nr_fixed_rate_clk,
+ struct of_device_id *clk_matches)
+{
+ const struct of_device_id *match;
+ struct device_node *np;
+ u32 freq;
+
+ for_each_matching_node_and_match(np, clk_matches, &match) {
+ if (of_property_read_u32(np, "clock-frequency", &freq))
+ continue;
+ fixed_rate_clk[(u32)match->data].fixed_rate = freq;
+ }
+ samsung_clk_register_fixed_rate(fixed_rate_clk, nr_fixed_rate_clk);
+}
+#endif
+
+/* utility function to get the rate of a specified clock */
+unsigned long _get_rate(const char *clk_name)
+{
+ struct clk *clk;
+ unsigned long rate;
+
+ clk = clk_get(NULL, clk_name);
+ if (IS_ERR(clk)) {
+ pr_err("%s: could not find clock %s\n", __func__, clk_name);
+ return 0;
+ }
+ rate = clk_get_rate(clk);
+ clk_put(clk);
+ return rate;
+}
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for all Samsung platforms
+*/
+
+#ifndef __SAMSUNG_CLK_H
+#define __SAMSUNG_CLK_H
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+/**
+ * struct samsung_clock_alias: information about mux clock
+ * @id: platform specific id of the clock.
+ * @dev_name: name of the device to which this clock belongs.
+ * @alias: optional clock alias name to be assigned to this clock.
+ */
+struct samsung_clock_alias {
+ unsigned int id;
+ const char *dev_name;
+ const char *alias;
+};
+
+#define ALIAS(_id, dname, a) \
+ { \
+ .id = _id, \
+ .dev_name = dname, \
+ .alias = a, \
+ }
+
+/**
+ * struct samsung_fixed_rate_clock: information about fixed-rate clock
+ * @id: platform specific id of the clock.
+ * @name: name of this fixed-rate clock.
+ * @parent_name: optional parent clock name.
+ * @flags: optional fixed-rate clock flags.
+ * @fixed-rate: fixed clock rate of this clock.
+ */
+struct samsung_fixed_rate_clock {
+ unsigned int id;
+ char *name;
+ const char *parent_name;
+ unsigned long flags;
+ unsigned long fixed_rate;
+};
+
+#define FRATE(_id, cname, pname, f, frate) \
+ { \
+ .id = _id, \
+ .name = cname, \
+ .parent_name = pname, \
+ .flags = f, \
+ .fixed_rate = frate, \
+ }
+
+/*
+ * struct samsung_fixed_factor_clock: information about fixed-factor clock
+ * @id: platform specific id of the clock.
+ * @name: name of this fixed-factor clock.
+ * @parent_name: parent clock name.
+ * @mult: fixed multiplication factor.
+ * @div: fixed division factor.
+ * @flags: optional fixed-factor clock flags.
+ */
+struct samsung_fixed_factor_clock {
+ unsigned int id;
+ char *name;
+ const char *parent_name;
+ unsigned long mult;
+ unsigned long div;
+ unsigned long flags;
+};
+
+#define FFACTOR(_id, cname, pname, m, d, f) \
+ { \
+ .id = _id, \
+ .name = cname, \
+ .parent_name = pname, \
+ .mult = m, \
+ .div = d, \
+ .flags = f, \
+ }
+
+/**
+ * struct samsung_mux_clock: information about mux clock
+ * @id: platform specific id of the clock.
+ * @dev_name: name of the device to which this clock belongs.
+ * @name: name of this mux clock.
+ * @parent_names: array of pointer to parent clock names.
+ * @num_parents: number of parents listed in @parent_names.
+ * @flags: optional flags for basic clock.
+ * @offset: offset of the register for configuring the mux.
+ * @shift: starting bit location of the mux control bit-field in @reg.
+ * @width: width of the mux control bit-field in @reg.
+ * @mux_flags: flags for mux-type clock.
+ * @alias: optional clock alias name to be assigned to this clock.
+ */
+struct samsung_mux_clock {
+ unsigned int id;
+ const char *dev_name;
+ const char *name;
+ const char **parent_names;
+ u8 num_parents;
+ unsigned long flags;
+ unsigned long offset;
+ u8 shift;
+ u8 width;
+ u8 mux_flags;
+ const char *alias;
+};
+
+#define __MUX(_id, dname, cname, pnames, o, s, w, f, mf, a) \
+ { \
+ .id = _id, \
+ .dev_name = dname, \
+ .name = cname, \
+ .parent_names = pnames, \
+ .num_parents = ARRAY_SIZE(pnames), \
+ .flags = f, \
+ .offset = o, \
+ .shift = s, \
+ .width = w, \
+ .mux_flags = mf, \
+ .alias = a, \
+ }
+
+#define MUX(_id, cname, pnames, o, s, w) \
+ __MUX(_id, NULL, cname, pnames, o, s, w, 0, 0, NULL)
+
+#define MUX_A(_id, cname, pnames, o, s, w, a) \
+ __MUX(_id, NULL, cname, pnames, o, s, w, 0, 0, a)
+
+#define MUX_F(_id, cname, pnames, o, s, w, f, mf) \
+ __MUX(_id, NULL, cname, pnames, o, s, w, f, mf, NULL)
+
+/**
+ * @id: platform specific id of the clock.
+ * struct samsung_div_clock: information about div clock
+ * @dev_name: name of the device to which this clock belongs.
+ * @name: name of this div clock.
+ * @parent_name: name of the parent clock.
+ * @flags: optional flags for basic clock.
+ * @offset: offset of the register for configuring the div.
+ * @shift: starting bit location of the div control bit-field in @reg.
+ * @div_flags: flags for div-type clock.
+ * @alias: optional clock alias name to be assigned to this clock.
+ */
+struct samsung_div_clock {
+ unsigned int id;
+ const char *dev_name;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+ unsigned long offset;
+ u8 shift;
+ u8 width;
+ u8 div_flags;
+ const char *alias;
+ struct clk_div_table *table;
+};
+
+#define __DIV(_id, dname, cname, pname, o, s, w, f, df, a, t) \
+ { \
+ .id = _id, \
+ .dev_name = dname, \
+ .name = cname, \
+ .parent_name = pname, \
+ .flags = f, \
+ .offset = o, \
+ .shift = s, \
+ .width = w, \
+ .div_flags = df, \
+ .alias = a, \
+ .table = t, \
+ }
+
+#define DIV(_id, cname, pname, o, s, w) \
+ __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, NULL, NULL)
+
+#define DIV_A(_id, cname, pname, o, s, w, a) \
+ __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, a, NULL)
+
+#define DIV_F(_id, cname, pname, o, s, w, f, df) \
+ __DIV(_id, NULL, cname, pname, o, s, w, f, df, NULL, NULL)
+
+#define DIV_T(_id, cname, pname, o, s, w, t) \
+ __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, NULL, t)
+
+/**
+ * struct samsung_gate_clock: information about gate clock
+ * @id: platform specific id of the clock.
+ * @dev_name: name of the device to which this clock belongs.
+ * @name: name of this gate clock.
+ * @parent_name: name of the parent clock.
+ * @flags: optional flags for basic clock.
+ * @offset: offset of the register for configuring the gate.
+ * @bit_idx: bit index of the gate control bit-field in @reg.
+ * @gate_flags: flags for gate-type clock.
+ * @alias: optional clock alias name to be assigned to this clock.
+ */
+struct samsung_gate_clock {
+ unsigned int id;
+ const char *dev_name;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+ unsigned long offset;
+ u8 bit_idx;
+ u8 gate_flags;
+ const char *alias;
+};
+
+#define __GATE(_id, dname, cname, pname, o, b, f, gf, a) \
+ { \
+ .id = _id, \
+ .dev_name = dname, \
+ .name = cname, \
+ .parent_name = pname, \
+ .flags = f, \
+ .offset = o, \
+ .bit_idx = b, \
+ .gate_flags = gf, \
+ .alias = a, \
+ }
+
+#define GATE(_id, cname, pname, o, b, f, gf) \
+ __GATE(_id, NULL, cname, pname, o, b, f, gf, NULL)
+
+#define GATE_A(_id, cname, pname, o, b, f, gf, a) \
+ __GATE(_id, NULL, cname, pname, o, b, f, gf, a)
+
+#define GATE_D(_id, dname, cname, pname, o, b, f, gf) \
+ __GATE(_id, dname, cname, pname, o, b, f, gf, NULL)
+
+#define GATE_DA(_id, dname, cname, pname, o, b, f, gf, a) \
+ __GATE(_id, dname, cname, pname, o, b, f, gf, a)
+
+#define PNAME(x) static const char *x[] __initdata
+
+/**
+ * struct samsung_clk_reg_dump: register dump of clock controller registers.
+ * @offset: clock register offset from the controller base address.
+ * @value: the value to be register at offset.
+ */
+struct samsung_clk_reg_dump {
+ u32 offset;
+ u32 value;
+};
+
+extern void __init samsung_clk_init(struct device_node *np, void __iomem *base,
+ unsigned long nr_clks, unsigned long *rdump,
+ unsigned long nr_rdump, unsigned long *soc_rdump,
+ unsigned long nr_soc_rdump);
+extern void __init samsung_clk_of_register_fixed_ext(
+ struct samsung_fixed_rate_clock *fixed_rate_clk,
+ unsigned int nr_fixed_rate_clk,
+ struct of_device_id *clk_matches);
+
+extern void samsung_clk_add_lookup(struct clk *clk, unsigned int id);
+
+extern void samsung_clk_register_alias(struct samsung_clock_alias *list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_fixed_rate(
+ struct samsung_fixed_rate_clock *clk_list, unsigned int nr_clk);
+extern void __init samsung_clk_register_fixed_factor(
+ struct samsung_fixed_factor_clock *list, unsigned int nr_clk);
+extern void __init samsung_clk_register_mux(struct samsung_mux_clock *clk_list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_div(struct samsung_div_clock *clk_list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_gate(
+ struct samsung_gate_clock *clk_list, unsigned int nr_clk);
+
+extern unsigned long _get_rate(const char *clk_name);
+
+#endif /* __SAMSUNG_CLK_H */
SPEAR1340_SPDIF_IN_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "d0100000.spdif-in");
- clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0,
+ clk = clk_register_gate(NULL, "acp_clk", "ahb_clk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "acp_clk");
- clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0,
+ clk = clk_register_gate(NULL, "plgpio_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e2800000.gpio");
- clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0,
+ clk = clk_register_gate(NULL, "video_dec_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_dec");
- clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mclk", 0,
+ clk = clk_register_gate(NULL, "video_enc_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_enc");
- clk = clk_register_gate(NULL, "video_in_clk", "video_in_mclk", 0,
+ clk = clk_register_gate(NULL, "video_in_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_vip");
- clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0,
+ clk = clk_register_gate(NULL, "cam0_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "d0200000.cam0");
- clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0,
+ clk = clk_register_gate(NULL, "cam1_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "d0300000.cam1");
- clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0,
+ clk = clk_register_gate(NULL, "cam2_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "d0400000.cam2");
- clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0,
+ clk = clk_register_gate(NULL, "cam3_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "d0500000.cam3");
--- /dev/null
+#
+# Makefile for sunxi specific clk
+#
+
+obj-y += clk-sunxi.o clk-factors.o
--- /dev/null
+/*
+ * Copyright (C) 2013 Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Adjustable factor-based clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+#include <linux/delay.h>
+
+#include "clk-factors.h"
+
+/*
+ * DOC: basic adjustable factor-based clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable.
+ * clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1)
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+struct clk_factors {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct clk_factors_config *config;
+ void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p);
+ spinlock_t *lock;
+};
+
+#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
+
+#define SETMASK(len, pos) (((-1U) >> (31-len)) << (pos))
+#define CLRMASK(len, pos) (~(SETMASK(len, pos)))
+#define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit))
+
+#define FACTOR_SET(bit, len, reg, val) \
+ (((reg) & CLRMASK(len, bit)) | (val << (bit)))
+
+static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u8 n = 1, k = 0, p = 0, m = 0;
+ u32 reg;
+ unsigned long rate;
+ struct clk_factors *factors = to_clk_factors(hw);
+ struct clk_factors_config *config = factors->config;
+
+ /* Fetch the register value */
+ reg = readl(factors->reg);
+
+ /* Get each individual factor if applicable */
+ if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ n = FACTOR_GET(config->nshift, config->nwidth, reg);
+ if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ k = FACTOR_GET(config->kshift, config->kwidth, reg);
+ if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ m = FACTOR_GET(config->mshift, config->mwidth, reg);
+ if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ p = FACTOR_GET(config->pshift, config->pwidth, reg);
+
+ /* Calculate the rate */
+ rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+
+ return rate;
+}
+
+static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_factors *factors = to_clk_factors(hw);
+ factors->get_factors((u32 *)&rate, (u32)*parent_rate,
+ NULL, NULL, NULL, NULL);
+
+ return rate;
+}
+
+static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ u8 n, k, m, p;
+ u32 reg;
+ struct clk_factors *factors = to_clk_factors(hw);
+ struct clk_factors_config *config = factors->config;
+ unsigned long flags = 0;
+
+ factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p);
+
+ if (factors->lock)
+ spin_lock_irqsave(factors->lock, flags);
+
+ /* Fetch the register value */
+ reg = readl(factors->reg);
+
+ /* Set up the new factors - macros do not do anything if width is 0 */
+ reg = FACTOR_SET(config->nshift, config->nwidth, reg, n);
+ reg = FACTOR_SET(config->kshift, config->kwidth, reg, k);
+ reg = FACTOR_SET(config->mshift, config->mwidth, reg, m);
+ reg = FACTOR_SET(config->pshift, config->pwidth, reg, p);
+
+ /* Apply them now */
+ writel(reg, factors->reg);
+
+ /* delay 500us so pll stabilizes */
+ __delay((rate >> 20) * 500 / 2);
+
+ if (factors->lock)
+ spin_unlock_irqrestore(factors->lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops clk_factors_ops = {
+ .recalc_rate = clk_factors_recalc_rate,
+ .round_rate = clk_factors_round_rate,
+ .set_rate = clk_factors_set_rate,
+};
+
+/**
+ * clk_register_factors - register a factors clock with
+ * the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust factors
+ * @config: shift and width of factors n, k, m and p
+ * @get_factors: function to calculate the factors for a given frequency
+ * @lock: shared register lock for this clock
+ */
+struct clk *clk_register_factors(struct device *dev, const char *name,
+ const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct clk_factors_config *config,
+ void (*get_factors)(u32 *rate, u32 parent,
+ u8 *n, u8 *k, u8 *m, u8 *p),
+ spinlock_t *lock)
+{
+ struct clk_factors *factors;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ /* allocate the factors */
+ factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
+ if (!factors) {
+ pr_err("%s: could not allocate factors clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &clk_factors_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ /* struct clk_factors assignments */
+ factors->reg = reg;
+ factors->config = config;
+ factors->lock = lock;
+ factors->hw.init = &init;
+ factors->get_factors = get_factors;
+
+ /* register the clock */
+ clk = clk_register(dev, &factors->hw);
+
+ if (IS_ERR(clk))
+ kfree(factors);
+
+ return clk;
+}
--- /dev/null
+#ifndef __MACH_SUNXI_CLK_FACTORS_H
+#define __MACH_SUNXI_CLK_FACTORS_H
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+#define SUNXI_FACTORS_NOT_APPLICABLE (0)
+
+struct clk_factors_config {
+ u8 nshift;
+ u8 nwidth;
+ u8 kshift;
+ u8 kwidth;
+ u8 mshift;
+ u8 mwidth;
+ u8 pshift;
+ u8 pwidth;
+};
+
+struct clk *clk_register_factors(struct device *dev, const char *name,
+ const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct clk_factors_config *config,
+ void (*get_factors) (u32 *rate, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p),
+ spinlock_t *lock);
+#endif
--- /dev/null
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/sunxi.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk-factors.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+/**
+ * sunxi_osc_clk_setup() - Setup function for gatable oscillator
+ */
+
+#define SUNXI_OSC24M_GATE 0
+
+static void __init sunxi_osc_clk_setup(struct device_node *node)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *parent;
+ void *reg;
+
+ reg = of_iomap(node, 0);
+
+ parent = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_gate(NULL, clk_name, parent, CLK_IGNORE_UNUSED,
+ reg, SUNXI_OSC24M_GATE, 0, &clk_lock);
+
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_get_pll1_factors() - calculates n, k, m, p factors for PLL1
+ * PLL1 rate is calculated as follows
+ * rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+ * parent_rate is always 24Mhz
+ */
+
+static void sunxi_get_pll1_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 div;
+
+ /* Normalize value to a 6M multiple */
+ div = *freq / 6000000;
+ *freq = 6000000 * div;
+
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ /* m is always zero for pll1 */
+ *m = 0;
+
+ /* k is 1 only on these cases */
+ if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000)
+ *k = 1;
+ else
+ *k = 0;
+
+ /* p will be 3 for divs under 10 */
+ if (div < 10)
+ *p = 3;
+
+ /* p will be 2 for divs between 10 - 20 and odd divs under 32 */
+ else if (div < 20 || (div < 32 && (div & 1)))
+ *p = 2;
+
+ /* p will be 1 for even divs under 32, divs under 40 and odd pairs
+ * of divs between 40-62 */
+ else if (div < 40 || (div < 64 && (div & 2)))
+ *p = 1;
+
+ /* any other entries have p = 0 */
+ else
+ *p = 0;
+
+ /* calculate a suitable n based on k and p */
+ div <<= *p;
+ div /= (*k + 1);
+ *n = div / 4;
+}
+
+
+
+/**
+ * sunxi_get_apb1_factors() - calculates m, p factors for APB1
+ * APB1 rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sunxi_get_apb1_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 calcm, calcp;
+
+ if (parent_rate < *freq)
+ *freq = parent_rate;
+
+ parent_rate = (parent_rate + (*freq - 1)) / *freq;
+
+ /* Invalid rate! */
+ if (parent_rate > 32)
+ return;
+
+ if (parent_rate <= 4)
+ calcp = 0;
+ else if (parent_rate <= 8)
+ calcp = 1;
+ else if (parent_rate <= 16)
+ calcp = 2;
+ else
+ calcp = 3;
+
+ calcm = (parent_rate >> calcp) - 1;
+
+ *freq = (parent_rate >> calcp) / (calcm + 1);
+
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ *m = calcm;
+ *p = calcp;
+}
+
+
+
+/**
+ * sunxi_factors_clk_setup() - Setup function for factor clocks
+ */
+
+struct factors_data {
+ struct clk_factors_config *table;
+ void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p);
+};
+
+static struct clk_factors_config pll1_config = {
+ .nshift = 8,
+ .nwidth = 5,
+ .kshift = 4,
+ .kwidth = 2,
+ .mshift = 0,
+ .mwidth = 2,
+ .pshift = 16,
+ .pwidth = 2,
+};
+
+static struct clk_factors_config apb1_config = {
+ .mshift = 0,
+ .mwidth = 5,
+ .pshift = 16,
+ .pwidth = 2,
+};
+
+static const __initconst struct factors_data pll1_data = {
+ .table = &pll1_config,
+ .getter = sunxi_get_pll1_factors,
+};
+
+static const __initconst struct factors_data apb1_data = {
+ .table = &apb1_config,
+ .getter = sunxi_get_apb1_factors,
+};
+
+static void __init sunxi_factors_clk_setup(struct device_node *node,
+ struct factors_data *data)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *parent;
+ void *reg;
+
+ reg = of_iomap(node, 0);
+
+ parent = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_factors(NULL, clk_name, parent, CLK_IGNORE_UNUSED,
+ reg, data->table, data->getter, &clk_lock);
+
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_mux_clk_setup() - Setup function for muxes
+ */
+
+#define SUNXI_MUX_GATE_WIDTH 2
+
+struct mux_data {
+ u8 shift;
+};
+
+static const __initconst struct mux_data cpu_data = {
+ .shift = 16,
+};
+
+static const __initconst struct mux_data apb1_mux_data = {
+ .shift = 24,
+};
+
+static void __init sunxi_mux_clk_setup(struct device_node *node,
+ struct mux_data *data)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char **parents = kmalloc(sizeof(char *) * 5, GFP_KERNEL);
+ void *reg;
+ int i = 0;
+
+ reg = of_iomap(node, 0);
+
+ while (i < 5 && (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
+ i++;
+
+ clk = clk_register_mux(NULL, clk_name, parents, i, 0, reg,
+ data->shift, SUNXI_MUX_GATE_WIDTH,
+ 0, &clk_lock);
+
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_divider_clk_setup() - Setup function for simple divider clocks
+ */
+
+#define SUNXI_DIVISOR_WIDTH 2
+
+struct div_data {
+ u8 shift;
+ u8 pow;
+};
+
+static const __initconst struct div_data axi_data = {
+ .shift = 0,
+ .pow = 0,
+};
+
+static const __initconst struct div_data ahb_data = {
+ .shift = 4,
+ .pow = 1,
+};
+
+static const __initconst struct div_data apb0_data = {
+ .shift = 8,
+ .pow = 1,
+};
+
+static void __init sunxi_divider_clk_setup(struct device_node *node,
+ struct div_data *data)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *clk_parent;
+ void *reg;
+
+ reg = of_iomap(node, 0);
+
+ clk_parent = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_divider(NULL, clk_name, clk_parent, 0,
+ reg, data->shift, SUNXI_DIVISOR_WIDTH,
+ data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0,
+ &clk_lock);
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+/* Matches for of_clk_init */
+static const __initconst struct of_device_id clk_match[] = {
+ {.compatible = "fixed-clock", .data = of_fixed_clk_setup,},
+ {.compatible = "allwinner,sun4i-osc-clk", .data = sunxi_osc_clk_setup,},
+ {}
+};
+
+/* Matches for factors clocks */
+static const __initconst struct of_device_id clk_factors_match[] = {
+ {.compatible = "allwinner,sun4i-pll1-clk", .data = &pll1_data,},
+ {.compatible = "allwinner,sun4i-apb1-clk", .data = &apb1_data,},
+ {}
+};
+
+/* Matches for divider clocks */
+static const __initconst struct of_device_id clk_div_match[] = {
+ {.compatible = "allwinner,sun4i-axi-clk", .data = &axi_data,},
+ {.compatible = "allwinner,sun4i-ahb-clk", .data = &ahb_data,},
+ {.compatible = "allwinner,sun4i-apb0-clk", .data = &apb0_data,},
+ {}
+};
+
+/* Matches for mux clocks */
+static const __initconst struct of_device_id clk_mux_match[] = {
+ {.compatible = "allwinner,sun4i-cpu-clk", .data = &cpu_data,},
+ {.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &apb1_mux_data,},
+ {}
+};
+
+static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_match,
+ void *function)
+{
+ struct device_node *np;
+ const struct div_data *data;
+ const struct of_device_id *match;
+ void (*setup_function)(struct device_node *, const void *) = function;
+
+ for_each_matching_node(np, clk_match) {
+ match = of_match_node(clk_match, np);
+ data = match->data;
+ setup_function(np, data);
+ }
+}
+
+void __init sunxi_init_clocks(void)
+{
+ /* Register all the simple sunxi clocks on DT */
+ of_clk_init(clk_match);
+
+ /* Register factor clocks */
+ of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);
+
+ /* Register divider clocks */
+ of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup);
+
+ /* Register mux clocks */
+ of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup);
+}
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += clk-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_114_SOC) += clk-tegra114.o
#define write_rst_clr(val, gate) \
writel_relaxed(val, gate->clk_base + (gate->regs->rst_clr_reg))
-#define periph_clk_to_bit(periph) (1 << (gate->clk_num % 32))
+#define periph_clk_to_bit(gate) (1 << (gate->clk_num % 32))
+
+#define LVL2_CLK_GATE_OVRE 0x554
/* Peripheral gate clock ops */
static int clk_periph_is_enabled(struct clk_hw *hw)
}
}
+ if (gate->flags & TEGRA_PERIPH_WAR_1005168) {
+ writel_relaxed(0, gate->clk_base + LVL2_CLK_GATE_OVRE);
+ writel_relaxed(BIT(22), gate->clk_base + LVL2_CLK_GATE_OVRE);
+ udelay(1);
+ writel_relaxed(0, gate->clk_base + LVL2_CLK_GATE_OVRE);
+ }
+
spin_unlock_irqrestore(&periph_ref_lock, flags);
return 0;
#include <linux/clk.h>
#include <linux/clk-provider.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/err.h>
tegra_periph_reset(gate, 0);
}
+EXPORT_SYMBOL(tegra_periph_reset_deassert);
void tegra_periph_reset_assert(struct clk *c)
{
tegra_periph_reset(gate, 1);
}
+EXPORT_SYMBOL(tegra_periph_reset_assert);
const struct clk_ops tegra_clk_periph_ops = {
.get_parent = clk_periph_get_parent,
static struct clk *_tegra_clk_register_periph(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph,
- void __iomem *clk_base, u32 offset, bool div)
+ void __iomem *clk_base, u32 offset, bool div,
+ unsigned long flags)
{
struct clk *clk;
struct clk_init_data init;
init.name = name;
init.ops = div ? &tegra_clk_periph_ops : &tegra_clk_periph_nodiv_ops;
- init.flags = div ? 0 : CLK_SET_RATE_PARENT;
+ init.flags = flags;
init.parent_names = parent_names;
init.num_parents = num_parents;
struct clk *tegra_clk_register_periph(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph, void __iomem *clk_base,
- u32 offset)
+ u32 offset, unsigned long flags)
{
return _tegra_clk_register_periph(name, parent_names, num_parents,
- periph, clk_base, offset, true);
+ periph, clk_base, offset, true, flags);
}
struct clk *tegra_clk_register_periph_nodiv(const char *name,
u32 offset)
{
return _tegra_clk_register_periph(name, parent_names, num_parents,
- periph, clk_base, offset, false);
+ periph, clk_base, offset, false, CLK_SET_RATE_PARENT);
}
/*
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
#define PLLE_SS_CTRL 0x68
#define PLLE_SS_DISABLE (7 << 10)
+#define PLLE_AUX_PLLP_SEL BIT(2)
+#define PLLE_AUX_ENABLE_SWCTL BIT(4)
+#define PLLE_AUX_SEQ_ENABLE BIT(24)
+#define PLLE_AUX_PLLRE_SEL BIT(28)
+
+#define PLLE_MISC_PLLE_PTS BIT(8)
+#define PLLE_MISC_IDDQ_SW_VALUE BIT(13)
+#define PLLE_MISC_IDDQ_SW_CTRL BIT(14)
+#define PLLE_MISC_VREG_BG_CTRL_SHIFT 4
+#define PLLE_MISC_VREG_BG_CTRL_MASK (3 << PLLE_MISC_VREG_BG_CTRL_SHIFT)
+#define PLLE_MISC_VREG_CTRL_SHIFT 2
+#define PLLE_MISC_VREG_CTRL_MASK (2 << PLLE_MISC_VREG_CTRL_SHIFT)
+
+#define PLLCX_MISC_STROBE BIT(31)
+#define PLLCX_MISC_RESET BIT(30)
+#define PLLCX_MISC_SDM_DIV_SHIFT 28
+#define PLLCX_MISC_SDM_DIV_MASK (0x3 << PLLCX_MISC_SDM_DIV_SHIFT)
+#define PLLCX_MISC_FILT_DIV_SHIFT 26
+#define PLLCX_MISC_FILT_DIV_MASK (0x3 << PLLCX_MISC_FILT_DIV_SHIFT)
+#define PLLCX_MISC_ALPHA_SHIFT 18
+#define PLLCX_MISC_DIV_LOW_RANGE \
+ ((0x1 << PLLCX_MISC_SDM_DIV_SHIFT) | \
+ (0x1 << PLLCX_MISC_FILT_DIV_SHIFT))
+#define PLLCX_MISC_DIV_HIGH_RANGE \
+ ((0x2 << PLLCX_MISC_SDM_DIV_SHIFT) | \
+ (0x2 << PLLCX_MISC_FILT_DIV_SHIFT))
+#define PLLCX_MISC_COEF_LOW_RANGE \
+ ((0x14 << PLLCX_MISC_KA_SHIFT) | (0x38 << PLLCX_MISC_KB_SHIFT))
+#define PLLCX_MISC_KA_SHIFT 2
+#define PLLCX_MISC_KB_SHIFT 9
+#define PLLCX_MISC_DEFAULT (PLLCX_MISC_COEF_LOW_RANGE | \
+ (0x19 << PLLCX_MISC_ALPHA_SHIFT) | \
+ PLLCX_MISC_DIV_LOW_RANGE | \
+ PLLCX_MISC_RESET)
+#define PLLCX_MISC1_DEFAULT 0x000d2308
+#define PLLCX_MISC2_DEFAULT 0x30211200
+#define PLLCX_MISC3_DEFAULT 0x200
+
+#define PMC_PLLM_WB0_OVERRIDE 0x1dc
+#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0
+#define PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK BIT(27)
+
#define PMC_SATA_PWRGT 0x1ac
#define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE BIT(5)
#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL BIT(4)
#define divn_max(p) (divn_mask(p))
#define divp_max(p) (1 << (divp_mask(p)))
+
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+/* PLLXC has 4-bit PDIV, but entry 15 is not allowed in h/w */
+#define PLLXC_PDIV_MAX 14
+
+/* non-monotonic mapping below is not a typo */
+static u8 pllxc_p[PLLXC_PDIV_MAX + 1] = {
+ /* PDIV: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 */
+ /* p: */ 1, 2, 3, 4, 5, 6, 8, 10, 12, 16, 12, 16, 20, 24, 32
+};
+
+#define PLLCX_PDIV_MAX 7
+static u8 pllcx_p[PLLCX_PDIV_MAX + 1] = {
+ /* PDIV: 0, 1, 2, 3, 4, 5, 6, 7 */
+ /* p: */ 1, 2, 3, 4, 6, 8, 12, 16
+};
+#endif
+
static void clk_pll_enable_lock(struct tegra_clk_pll *pll)
{
u32 val;
if (!(pll->flags & TEGRA_PLL_USE_LOCK))
return;
+ if (!(pll->flags & TEGRA_PLL_HAS_LOCK_ENABLE))
+ return;
+
val = pll_readl_misc(pll);
val |= BIT(pll->params->lock_enable_bit_idx);
pll_writel_misc(val, pll);
}
-static int clk_pll_wait_for_lock(struct tegra_clk_pll *pll,
- void __iomem *lock_addr, u32 lock_bit_idx)
+static int clk_pll_wait_for_lock(struct tegra_clk_pll *pll)
{
int i;
- u32 val;
+ u32 val, lock_mask;
+ void __iomem *lock_addr;
if (!(pll->flags & TEGRA_PLL_USE_LOCK)) {
udelay(pll->params->lock_delay);
return 0;
}
+ lock_addr = pll->clk_base;
+ if (pll->flags & TEGRA_PLL_LOCK_MISC)
+ lock_addr += pll->params->misc_reg;
+ else
+ lock_addr += pll->params->base_reg;
+
+ lock_mask = pll->params->lock_mask;
+
for (i = 0; i < pll->params->lock_delay; i++) {
val = readl_relaxed(lock_addr);
- if (val & BIT(lock_bit_idx)) {
+ if ((val & lock_mask) == lock_mask) {
udelay(PLL_POST_LOCK_DELAY);
return 0;
}
return val & PLL_BASE_ENABLE ? 1 : 0;
}
-static int _clk_pll_enable(struct clk_hw *hw)
+static void _clk_pll_enable(struct clk_hw *hw)
{
struct tegra_clk_pll *pll = to_clk_pll(hw);
u32 val;
clk_pll_enable_lock(pll);
val = pll_readl_base(pll);
- val &= ~PLL_BASE_BYPASS;
+ if (pll->flags & TEGRA_PLL_BYPASS)
+ val &= ~PLL_BASE_BYPASS;
val |= PLL_BASE_ENABLE;
pll_writel_base(val, pll);
val |= PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
writel_relaxed(val, pll->pmc + PMC_PLLP_WB0_OVERRIDE);
}
-
- clk_pll_wait_for_lock(pll, pll->clk_base + pll->params->base_reg,
- pll->params->lock_bit_idx);
-
- return 0;
}
static void _clk_pll_disable(struct clk_hw *hw)
u32 val;
val = pll_readl_base(pll);
- val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+ if (pll->flags & TEGRA_PLL_BYPASS)
+ val &= ~PLL_BASE_BYPASS;
+ val &= ~PLL_BASE_ENABLE;
pll_writel_base(val, pll);
if (pll->flags & TEGRA_PLLM) {
if (pll->lock)
spin_lock_irqsave(pll->lock, flags);
- ret = _clk_pll_enable(hw);
+ _clk_pll_enable(hw);
+
+ ret = clk_pll_wait_for_lock(pll);
if (pll->lock)
spin_unlock_irqrestore(pll->lock, flags);
if (sel->input_rate == 0)
return -EINVAL;
- BUG_ON(sel->p < 1);
-
cfg->input_rate = sel->input_rate;
cfg->output_rate = sel->output_rate;
cfg->m = sel->m;
unsigned long rate, unsigned long parent_rate)
{
struct tegra_clk_pll *pll = to_clk_pll(hw);
+ struct pdiv_map *p_tohw = pll->params->pdiv_tohw;
unsigned long cfreq;
u32 p_div = 0;
cfg->output_rate <<= 1)
p_div++;
- cfg->p = 1 << p_div;
cfg->m = parent_rate / cfreq;
cfg->n = cfg->output_rate / cfreq;
cfg->cpcon = OUT_OF_TABLE_CPCON;
if (cfg->m > divm_max(pll) || cfg->n > divn_max(pll) ||
- cfg->p > divp_max(pll) || cfg->output_rate > pll->params->vco_max) {
+ (1 << p_div) > divp_max(pll)
+ || cfg->output_rate > pll->params->vco_max) {
pr_err("%s: Failed to set %s rate %lu\n",
__func__, __clk_get_name(hw->clk), rate);
return -EINVAL;
}
+ if (p_tohw) {
+ p_div = 1 << p_div;
+ while (p_tohw->pdiv) {
+ if (p_div <= p_tohw->pdiv) {
+ cfg->p = p_tohw->hw_val;
+ break;
+ }
+ p_tohw++;
+ }
+ if (!p_tohw->pdiv)
+ return -EINVAL;
+ } else
+ cfg->p = p_div;
+
return 0;
}
-static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
- unsigned long rate)
+static void _update_pll_mnp(struct tegra_clk_pll *pll,
+ struct tegra_clk_pll_freq_table *cfg)
{
- struct tegra_clk_pll *pll = to_clk_pll(hw);
- unsigned long flags = 0;
- u32 divp, val, old_base;
- int state;
-
- divp = __ffs(cfg->p);
-
- if (pll->flags & TEGRA_PLLU)
- divp ^= 1;
+ u32 val;
- if (pll->lock)
- spin_lock_irqsave(pll->lock, flags);
+ val = pll_readl_base(pll);
- old_base = val = pll_readl_base(pll);
val &= ~((divm_mask(pll) << pll->divm_shift) |
(divn_mask(pll) << pll->divn_shift) |
(divp_mask(pll) << pll->divp_shift));
val |= ((cfg->m << pll->divm_shift) |
(cfg->n << pll->divn_shift) |
- (divp << pll->divp_shift));
- if (val == old_base) {
- if (pll->lock)
- spin_unlock_irqrestore(pll->lock, flags);
- return 0;
+ (cfg->p << pll->divp_shift));
+
+ pll_writel_base(val, pll);
+}
+
+static void _get_pll_mnp(struct tegra_clk_pll *pll,
+ struct tegra_clk_pll_freq_table *cfg)
+{
+ u32 val;
+
+ val = pll_readl_base(pll);
+
+ cfg->m = (val >> pll->divm_shift) & (divm_mask(pll));
+ cfg->n = (val >> pll->divn_shift) & (divn_mask(pll));
+ cfg->p = (val >> pll->divp_shift) & (divp_mask(pll));
+}
+
+static void _update_pll_cpcon(struct tegra_clk_pll *pll,
+ struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate)
+{
+ u32 val;
+
+ val = pll_readl_misc(pll);
+
+ val &= ~(PLL_MISC_CPCON_MASK << PLL_MISC_CPCON_SHIFT);
+ val |= cfg->cpcon << PLL_MISC_CPCON_SHIFT;
+
+ if (pll->flags & TEGRA_PLL_SET_LFCON) {
+ val &= ~(PLL_MISC_LFCON_MASK << PLL_MISC_LFCON_SHIFT);
+ if (cfg->n >= PLLDU_LFCON_SET_DIVN)
+ val |= 1 << PLL_MISC_LFCON_SHIFT;
+ } else if (pll->flags & TEGRA_PLL_SET_DCCON) {
+ val &= ~(1 << PLL_MISC_DCCON_SHIFT);
+ if (rate >= (pll->params->vco_max >> 1))
+ val |= 1 << PLL_MISC_DCCON_SHIFT;
}
+ pll_writel_misc(val, pll);
+}
+
+static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ int state, ret = 0;
+
state = clk_pll_is_enabled(hw);
- if (state) {
+ if (state)
_clk_pll_disable(hw);
- val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
- }
- pll_writel_base(val, pll);
- if (pll->flags & TEGRA_PLL_HAS_CPCON) {
- val = pll_readl_misc(pll);
- val &= ~(PLL_MISC_CPCON_MASK << PLL_MISC_CPCON_SHIFT);
- val |= cfg->cpcon << PLL_MISC_CPCON_SHIFT;
- if (pll->flags & TEGRA_PLL_SET_LFCON) {
- val &= ~(PLL_MISC_LFCON_MASK << PLL_MISC_LFCON_SHIFT);
- if (cfg->n >= PLLDU_LFCON_SET_DIVN)
- val |= 0x1 << PLL_MISC_LFCON_SHIFT;
- } else if (pll->flags & TEGRA_PLL_SET_DCCON) {
- val &= ~(0x1 << PLL_MISC_DCCON_SHIFT);
- if (rate >= (pll->params->vco_max >> 1))
- val |= 0x1 << PLL_MISC_DCCON_SHIFT;
- }
- pll_writel_misc(val, pll);
- }
+ _update_pll_mnp(pll, cfg);
- if (pll->lock)
- spin_unlock_irqrestore(pll->lock, flags);
+ if (pll->flags & TEGRA_PLL_HAS_CPCON)
+ _update_pll_cpcon(pll, cfg, rate);
- if (state)
- clk_pll_enable(hw);
+ if (state) {
+ _clk_pll_enable(hw);
+ ret = clk_pll_wait_for_lock(pll);
+ }
- return 0;
+ return ret;
}
static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct tegra_clk_pll *pll = to_clk_pll(hw);
- struct tegra_clk_pll_freq_table cfg;
+ struct tegra_clk_pll_freq_table cfg, old_cfg;
+ unsigned long flags = 0;
+ int ret = 0;
if (pll->flags & TEGRA_PLL_FIXED) {
if (rate != pll->fixed_rate) {
_calc_rate(hw, &cfg, rate, parent_rate))
return -EINVAL;
- return _program_pll(hw, &cfg, rate);
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _get_pll_mnp(pll, &old_cfg);
+
+ if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_cfg.p != cfg.p)
+ ret = _program_pll(hw, &cfg, rate);
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
}
static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
output_rate *= cfg.n;
- do_div(output_rate, cfg.m * cfg.p);
+ do_div(output_rate, cfg.m * (1 << cfg.p));
return output_rate;
}
unsigned long parent_rate)
{
struct tegra_clk_pll *pll = to_clk_pll(hw);
- u32 val = pll_readl_base(pll);
- u32 divn = 0, divm = 0, divp = 0;
+ struct tegra_clk_pll_freq_table cfg;
+ struct pdiv_map *p_tohw = pll->params->pdiv_tohw;
+ u32 val;
u64 rate = parent_rate;
+ int pdiv;
+
+ val = pll_readl_base(pll);
- if (val & PLL_BASE_BYPASS)
+ if ((pll->flags & TEGRA_PLL_BYPASS) && (val & PLL_BASE_BYPASS))
return parent_rate;
if ((pll->flags & TEGRA_PLL_FIXED) && !(val & PLL_BASE_OVERRIDE)) {
return pll->fixed_rate;
}
- divp = (val >> pll->divp_shift) & (divp_mask(pll));
- if (pll->flags & TEGRA_PLLU)
- divp ^= 1;
+ _get_pll_mnp(pll, &cfg);
- divn = (val >> pll->divn_shift) & (divn_mask(pll));
- divm = (val >> pll->divm_shift) & (divm_mask(pll));
- divm *= (1 << divp);
+ if (p_tohw) {
+ while (p_tohw->pdiv) {
+ if (cfg.p == p_tohw->hw_val) {
+ pdiv = p_tohw->pdiv;
+ break;
+ }
+ p_tohw++;
+ }
+
+ if (!p_tohw->pdiv) {
+ WARN_ON(1);
+ pdiv = 1;
+ }
+ } else
+ pdiv = 1 << cfg.p;
+
+ cfg.m *= pdiv;
+
+ rate *= cfg.n;
+ do_div(rate, cfg.m);
- rate *= divn;
- do_div(rate, divm);
return rate;
}
val |= (PLL_BASE_BYPASS | PLL_BASE_ENABLE);
pll_writel_base(val, pll);
- clk_pll_wait_for_lock(pll, pll->clk_base + pll->params->misc_reg,
- pll->params->lock_bit_idx);
+ clk_pll_wait_for_lock(pll);
+
return 0;
}
.enable = clk_plle_enable,
};
-static struct clk *_tegra_clk_register_pll(const char *name,
- const char *parent_name, void __iomem *clk_base,
- void __iomem *pmc, unsigned long flags,
- unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock,
- const struct clk_ops *ops)
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+
+static int _pll_fixed_mdiv(struct tegra_clk_pll_params *pll_params,
+ unsigned long parent_rate)
{
- struct tegra_clk_pll *pll;
- struct clk *clk;
- struct clk_init_data init;
+ if (parent_rate > pll_params->cf_max)
+ return 2;
+ else
+ return 1;
+}
- pll = kzalloc(sizeof(*pll), GFP_KERNEL);
- if (!pll)
- return ERR_PTR(-ENOMEM);
+static int clk_pll_iddq_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
- init.name = name;
- init.ops = ops;
- init.flags = flags;
- init.parent_names = (parent_name ? &parent_name : NULL);
- init.num_parents = (parent_name ? 1 : 0);
+ u32 val;
+ int ret;
- pll->clk_base = clk_base;
- pll->pmc = pmc;
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
- pll->freq_table = freq_table;
- pll->params = pll_params;
- pll->fixed_rate = fixed_rate;
- pll->flags = pll_flags;
- pll->lock = lock;
+ val = pll_readl(pll->params->iddq_reg, pll);
+ val &= ~BIT(pll->params->iddq_bit_idx);
+ pll_writel(val, pll->params->iddq_reg, pll);
+ udelay(2);
- pll->divp_shift = PLL_BASE_DIVP_SHIFT;
- pll->divp_width = PLL_BASE_DIVP_WIDTH;
- pll->divn_shift = PLL_BASE_DIVN_SHIFT;
- pll->divn_width = PLL_BASE_DIVN_WIDTH;
- pll->divm_shift = PLL_BASE_DIVM_SHIFT;
- pll->divm_width = PLL_BASE_DIVM_WIDTH;
+ _clk_pll_enable(hw);
- /* Data in .init is copied by clk_register(), so stack variable OK */
- pll->hw.init = &init;
+ ret = clk_pll_wait_for_lock(pll);
- clk = clk_register(NULL, &pll->hw);
- if (IS_ERR(clk))
- kfree(pll);
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
- return clk;
+ return 0;
}
-struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
- void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+static void clk_pll_iddq_disable(struct clk_hw *hw)
{
- return _tegra_clk_register_pll(name, parent_name, clk_base, pmc,
- flags, fixed_rate, pll_params, pll_flags, freq_table,
- lock, &tegra_clk_pll_ops);
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ u32 val;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _clk_pll_disable(hw);
+
+ val = pll_readl(pll->params->iddq_reg, pll);
+ val |= BIT(pll->params->iddq_bit_idx);
+ pll_writel(val, pll->params->iddq_reg, pll);
+ udelay(2);
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
}
-struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
- void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+static int _calc_dynamic_ramp_rate(struct clk_hw *hw,
+ struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned int p;
+
+ if (!rate)
+ return -EINVAL;
+
+ p = DIV_ROUND_UP(pll->params->vco_min, rate);
+ cfg->m = _pll_fixed_mdiv(pll->params, parent_rate);
+ cfg->p = p;
+ cfg->output_rate = rate * cfg->p;
+ cfg->n = cfg->output_rate * cfg->m / parent_rate;
+
+ if (cfg->n > divn_max(pll) || cfg->output_rate > pll->params->vco_max)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int _pll_ramp_calc_pll(struct clk_hw *hw,
+ struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ int err = 0;
+
+ err = _get_table_rate(hw, cfg, rate, parent_rate);
+ if (err < 0)
+ err = _calc_dynamic_ramp_rate(hw, cfg, rate, parent_rate);
+ else if (cfg->m != _pll_fixed_mdiv(pll->params, parent_rate)) {
+ WARN_ON(1);
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (!cfg->p || (cfg->p > pll->params->max_p))
+ err = -EINVAL;
+
+out:
+ return err;
+}
+
+static int clk_pllxc_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ struct tegra_clk_pll_freq_table cfg, old_cfg;
+ unsigned long flags = 0;
+ int ret = 0;
+ u8 old_p;
+
+ ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate);
+ if (ret < 0)
+ return ret;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _get_pll_mnp(pll, &old_cfg);
+
+ old_p = pllxc_p[old_cfg.p];
+ if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_p != cfg.p) {
+ cfg.p -= 1;
+ ret = _program_pll(hw, &cfg, rate);
+ }
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static long clk_pll_ramp_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct tegra_clk_pll_freq_table cfg;
+ int ret = 0;
+ u64 output_rate = *prate;
+
+ ret = _pll_ramp_calc_pll(hw, &cfg, rate, *prate);
+ if (ret < 0)
+ return ret;
+
+ output_rate *= cfg.n;
+ do_div(output_rate, cfg.m * cfg.p);
+
+ return output_rate;
+}
+
+static int clk_pllm_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll_freq_table cfg;
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ int state, ret = 0;
+ u32 val;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ state = clk_pll_is_enabled(hw);
+ if (state) {
+ if (rate != clk_get_rate(hw->clk)) {
+ pr_err("%s: Cannot change active PLLM\n", __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+ goto out;
+ }
+
+ ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate);
+ if (ret < 0)
+ goto out;
+
+ cfg.p -= 1;
+
+ val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE);
+ if (val & PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE) {
+ val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE_2);
+ val = cfg.p ? (val | PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK) :
+ (val & ~PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK);
+ writel_relaxed(val, pll->pmc + PMC_PLLM_WB0_OVERRIDE_2);
+
+ val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE);
+ val &= ~(divn_mask(pll) | divm_mask(pll));
+ val |= (cfg.m << pll->divm_shift) | (cfg.n << pll->divn_shift);
+ writel_relaxed(val, pll->pmc + PMC_PLLM_WB0_OVERRIDE);
+ } else
+ _update_pll_mnp(pll, &cfg);
+
+
+out:
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static void _pllcx_strobe(struct tegra_clk_pll *pll)
+{
+ u32 val;
+
+ val = pll_readl_misc(pll);
+ val |= PLLCX_MISC_STROBE;
+ pll_writel_misc(val, pll);
+ udelay(2);
+
+ val &= ~PLLCX_MISC_STROBE;
+ pll_writel_misc(val, pll);
+}
+
+static int clk_pllc_enable(struct clk_hw *hw)
{
- return _tegra_clk_register_pll(name, parent_name, clk_base, pmc,
- flags, fixed_rate, pll_params, pll_flags, freq_table,
- lock, &tegra_clk_plle_ops);
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ u32 val;
+ int ret = 0;
+ unsigned long flags = 0;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _clk_pll_enable(hw);
+ udelay(2);
+
+ val = pll_readl_misc(pll);
+ val &= ~PLLCX_MISC_RESET;
+ pll_writel_misc(val, pll);
+ udelay(2);
+
+ _pllcx_strobe(pll);
+
+ ret = clk_pll_wait_for_lock(pll);
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static void _clk_pllc_disable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ u32 val;
+
+ _clk_pll_disable(hw);
+
+ val = pll_readl_misc(pll);
+ val |= PLLCX_MISC_RESET;
+ pll_writel_misc(val, pll);
+ udelay(2);
+}
+
+static void clk_pllc_disable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _clk_pllc_disable(hw);
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+}
+
+static int _pllcx_update_dynamic_coef(struct tegra_clk_pll *pll,
+ unsigned long input_rate, u32 n)
+{
+ u32 val, n_threshold;
+
+ switch (input_rate) {
+ case 12000000:
+ n_threshold = 70;
+ break;
+ case 13000000:
+ case 26000000:
+ n_threshold = 71;
+ break;
+ case 16800000:
+ n_threshold = 55;
+ break;
+ case 19200000:
+ n_threshold = 48;
+ break;
+ default:
+ pr_err("%s: Unexpected reference rate %lu\n",
+ __func__, input_rate);
+ return -EINVAL;
+ }
+
+ val = pll_readl_misc(pll);
+ val &= ~(PLLCX_MISC_SDM_DIV_MASK | PLLCX_MISC_FILT_DIV_MASK);
+ val |= n <= n_threshold ?
+ PLLCX_MISC_DIV_LOW_RANGE : PLLCX_MISC_DIV_HIGH_RANGE;
+ pll_writel_misc(val, pll);
+
+ return 0;
+}
+
+static int clk_pllc_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll_freq_table cfg;
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ int state, ret = 0;
+ u32 val;
+ u16 old_m, old_n;
+ u8 old_p;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate);
+ if (ret < 0)
+ goto out;
+
+ val = pll_readl_base(pll);
+ old_m = (val >> pll->divm_shift) & (divm_mask(pll));
+ old_n = (val >> pll->divn_shift) & (divn_mask(pll));
+ old_p = pllcx_p[(val >> pll->divp_shift) & (divp_mask(pll))];
+
+ if (cfg.m != old_m) {
+ WARN_ON(1);
+ goto out;
+ }
+
+ if (old_n == cfg.n && old_p == cfg.p)
+ goto out;
+
+ cfg.p -= 1;
+
+ state = clk_pll_is_enabled(hw);
+ if (state)
+ _clk_pllc_disable(hw);
+
+ ret = _pllcx_update_dynamic_coef(pll, parent_rate, cfg.n);
+ if (ret < 0)
+ goto out;
+
+ _update_pll_mnp(pll, &cfg);
+
+ if (state)
+ ret = clk_pllc_enable(hw);
+
+out:
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static long _pllre_calc_rate(struct tegra_clk_pll *pll,
+ struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate, unsigned long parent_rate)
+{
+ u16 m, n;
+ u64 output_rate = parent_rate;
+
+ m = _pll_fixed_mdiv(pll->params, parent_rate);
+ n = rate * m / parent_rate;
+
+ output_rate *= n;
+ do_div(output_rate, m);
+
+ if (cfg) {
+ cfg->m = m;
+ cfg->n = n;
+ }
+
+ return output_rate;
+}
+static int clk_pllre_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll_freq_table cfg, old_cfg;
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ int state, ret = 0;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _pllre_calc_rate(pll, &cfg, rate, parent_rate);
+ _get_pll_mnp(pll, &old_cfg);
+ cfg.p = old_cfg.p;
+
+ if (cfg.m != old_cfg.m || cfg.n != old_cfg.n) {
+ state = clk_pll_is_enabled(hw);
+ if (state)
+ _clk_pll_disable(hw);
+
+ _update_pll_mnp(pll, &cfg);
+
+ if (state) {
+ _clk_pll_enable(hw);
+ ret = clk_pll_wait_for_lock(pll);
+ }
+ }
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static unsigned long clk_pllre_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll_freq_table cfg;
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ u64 rate = parent_rate;
+
+ _get_pll_mnp(pll, &cfg);
+
+ rate *= cfg.n;
+ do_div(rate, cfg.m);
+
+ return rate;
+}
+
+static long clk_pllre_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+
+ return _pllre_calc_rate(pll, NULL, rate, *prate);
+}
+
+static int clk_plle_tegra114_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ struct tegra_clk_pll_freq_table sel;
+ u32 val;
+ int ret;
+ unsigned long flags = 0;
+ unsigned long input_rate = clk_get_rate(clk_get_parent(hw->clk));
+
+ if (_get_table_rate(hw, &sel, pll->fixed_rate, input_rate))
+ return -EINVAL;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ val = pll_readl_base(pll);
+ val &= ~BIT(29); /* Disable lock override */
+ pll_writel_base(val, pll);
+
+ val = pll_readl(pll->params->aux_reg, pll);
+ val |= PLLE_AUX_ENABLE_SWCTL;
+ val &= ~PLLE_AUX_SEQ_ENABLE;
+ pll_writel(val, pll->params->aux_reg, pll);
+ udelay(1);
+
+ val = pll_readl_misc(pll);
+ val |= PLLE_MISC_LOCK_ENABLE;
+ val |= PLLE_MISC_IDDQ_SW_CTRL;
+ val &= ~PLLE_MISC_IDDQ_SW_VALUE;
+ val |= PLLE_MISC_PLLE_PTS;
+ val |= PLLE_MISC_VREG_BG_CTRL_MASK | PLLE_MISC_VREG_CTRL_MASK;
+ pll_writel_misc(val, pll);
+ udelay(5);
+
+ val = pll_readl(PLLE_SS_CTRL, pll);
+ val |= PLLE_SS_DISABLE;
+ pll_writel(val, PLLE_SS_CTRL, pll);
+
+ val = pll_readl_base(pll);
+ val &= ~(divm_mask(pll) | divn_mask(pll) | divp_mask(pll));
+ val &= ~(PLLE_BASE_DIVCML_WIDTH << PLLE_BASE_DIVCML_SHIFT);
+ val |= sel.m << pll->divm_shift;
+ val |= sel.n << pll->divn_shift;
+ val |= sel.cpcon << PLLE_BASE_DIVCML_SHIFT;
+ pll_writel_base(val, pll);
+ udelay(1);
+
+ _clk_pll_enable(hw);
+ ret = clk_pll_wait_for_lock(pll);
+
+ if (ret < 0)
+ goto out;
+
+ /* TODO: enable hw control of xusb brick pll */
+
+out:
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static void clk_plle_tegra114_disable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ u32 val;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _clk_pll_disable(hw);
+
+ val = pll_readl_misc(pll);
+ val |= PLLE_MISC_IDDQ_SW_CTRL | PLLE_MISC_IDDQ_SW_VALUE;
+ pll_writel_misc(val, pll);
+ udelay(1);
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+}
+#endif
+
+static struct tegra_clk_pll *_tegra_init_pll(void __iomem *clk_base,
+ void __iomem *pmc, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->clk_base = clk_base;
+ pll->pmc = pmc;
+
+ pll->freq_table = freq_table;
+ pll->params = pll_params;
+ pll->fixed_rate = fixed_rate;
+ pll->flags = pll_flags;
+ pll->lock = lock;
+
+ pll->divp_shift = PLL_BASE_DIVP_SHIFT;
+ pll->divp_width = PLL_BASE_DIVP_WIDTH;
+ pll->divn_shift = PLL_BASE_DIVN_SHIFT;
+ pll->divn_width = PLL_BASE_DIVN_WIDTH;
+ pll->divm_shift = PLL_BASE_DIVM_SHIFT;
+ pll->divm_width = PLL_BASE_DIVM_WIDTH;
+
+ return pll;
+}
+
+static struct clk *_tegra_clk_register_pll(struct tegra_clk_pll *pll,
+ const char *name, const char *parent_name, unsigned long flags,
+ const struct clk_ops *ops)
+{
+ struct clk_init_data init;
+
+ init.name = name;
+ init.ops = ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ /* Data in .init is copied by clk_register(), so stack variable OK */
+ pll->hw.init = &init;
+
+ return clk_register(NULL, &pll->hw);
+}
+
+struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ pll_flags |= TEGRA_PLL_BYPASS;
+ pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
+ freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pll_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ pll_flags |= TEGRA_PLL_LOCK_MISC | TEGRA_PLL_BYPASS;
+ pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
+ freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_plle_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+const struct clk_ops tegra_clk_pllxc_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pll_iddq_enable,
+ .disable = clk_pll_iddq_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_ramp_round_rate,
+ .set_rate = clk_pllxc_set_rate,
+};
+
+const struct clk_ops tegra_clk_pllm_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pll_iddq_enable,
+ .disable = clk_pll_iddq_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_ramp_round_rate,
+ .set_rate = clk_pllm_set_rate,
+};
+
+const struct clk_ops tegra_clk_pllc_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pllc_enable,
+ .disable = clk_pllc_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_ramp_round_rate,
+ .set_rate = clk_pllc_set_rate,
+};
+
+const struct clk_ops tegra_clk_pllre_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pll_iddq_enable,
+ .disable = clk_pll_iddq_disable,
+ .recalc_rate = clk_pllre_recalc_rate,
+ .round_rate = clk_pllre_round_rate,
+ .set_rate = clk_pllre_set_rate,
+};
+
+const struct clk_ops tegra_clk_plle_tegra114_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_plle_tegra114_enable,
+ .disable = clk_plle_tegra114_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+};
+
+
+struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ if (!pll_params->pdiv_tohw)
+ return ERR_PTR(-EINVAL);
+
+ pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
+ freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pllxc_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock, unsigned long parent_rate)
+{
+ u32 val;
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
+ freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ /* program minimum rate by default */
+
+ val = pll_readl_base(pll);
+ if (val & PLL_BASE_ENABLE)
+ WARN_ON(val & pll_params->iddq_bit_idx);
+ else {
+ int m;
+
+ m = _pll_fixed_mdiv(pll_params, parent_rate);
+ val = m << PLL_BASE_DIVM_SHIFT;
+ val |= (pll_params->vco_min / parent_rate)
+ << PLL_BASE_DIVN_SHIFT;
+ pll_writel_base(val, pll);
+ }
+
+ /* disable lock override */
+
+ val = pll_readl_misc(pll);
+ val &= ~BIT(29);
+ pll_writel_misc(val, pll);
+
+ pll_flags |= TEGRA_PLL_LOCK_MISC;
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pllre_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ if (!pll_params->pdiv_tohw)
+ return ERR_PTR(-EINVAL);
+
+ pll_flags |= TEGRA_PLL_BYPASS;
+ pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
+ freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pllm_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock)
+{
+ struct clk *parent, *clk;
+ struct pdiv_map *p_tohw = pll_params->pdiv_tohw;
+ struct tegra_clk_pll *pll;
+ struct tegra_clk_pll_freq_table cfg;
+ unsigned long parent_rate;
+
+ if (!p_tohw)
+ return ERR_PTR(-EINVAL);
+
+ parent = __clk_lookup(parent_name);
+ if (IS_ERR(parent)) {
+ WARN(1, "parent clk %s of %s must be registered first\n",
+ name, parent_name);
+ return ERR_PTR(-EINVAL);
+ }
+
+ pll_flags |= TEGRA_PLL_BYPASS;
+ pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
+ freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ parent_rate = __clk_get_rate(parent);
+
+ /*
+ * Most of PLLC register fields are shadowed, and can not be read
+ * directly from PLL h/w. Hence, actual PLLC boot state is unknown.
+ * Initialize PLL to default state: disabled, reset; shadow registers
+ * loaded with default parameters; dividers are preset for half of
+ * minimum VCO rate (the latter assured that shadowed divider settings
+ * are within supported range).
+ */
+
+ cfg.m = _pll_fixed_mdiv(pll_params, parent_rate);
+ cfg.n = cfg.m * pll_params->vco_min / parent_rate;
+
+ while (p_tohw->pdiv) {
+ if (p_tohw->pdiv == 2) {
+ cfg.p = p_tohw->hw_val;
+ break;
+ }
+ p_tohw++;
+ }
+
+ if (!p_tohw->pdiv) {
+ WARN_ON(1);
+ return ERR_PTR(-EINVAL);
+ }
+
+ pll_writel_base(0, pll);
+ _update_pll_mnp(pll, &cfg);
+
+ pll_writel_misc(PLLCX_MISC_DEFAULT, pll);
+ pll_writel(PLLCX_MISC1_DEFAULT, pll_params->ext_misc_reg[0], pll);
+ pll_writel(PLLCX_MISC2_DEFAULT, pll_params->ext_misc_reg[1], pll);
+ pll_writel(PLLCX_MISC3_DEFAULT, pll_params->ext_misc_reg[2], pll);
+
+ _pllcx_update_dynamic_coef(pll, parent_rate, cfg.n);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pllc_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+struct clk *tegra_clk_register_plle_tegra114(const char *name,
+ const char *parent_name,
+ void __iomem *clk_base, unsigned long flags,
+ unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+ u32 val, val_aux;
+
+ pll = _tegra_init_pll(clk_base, NULL, fixed_rate, pll_params,
+ TEGRA_PLL_HAS_LOCK_ENABLE, freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ /* ensure parent is set to pll_re_vco */
+
+ val = pll_readl_base(pll);
+ val_aux = pll_readl(pll_params->aux_reg, pll);
+
+ if (val & PLL_BASE_ENABLE) {
+ if (!(val_aux & PLLE_AUX_PLLRE_SEL))
+ WARN(1, "pll_e enabled with unsupported parent %s\n",
+ (val & PLLE_AUX_PLLP_SEL) ? "pllp_out0" : "pll_ref");
+ } else {
+ val_aux |= PLLE_AUX_PLLRE_SEL;
+ pll_writel(val, pll_params->aux_reg, pll);
+ }
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_plle_tegra114_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
}
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/clk/tegra.h>
+
+#include "clk.h"
+
+#define RST_DEVICES_L 0x004
+#define RST_DEVICES_H 0x008
+#define RST_DEVICES_U 0x00C
+#define RST_DEVICES_V 0x358
+#define RST_DEVICES_W 0x35C
+#define RST_DEVICES_X 0x28C
+#define RST_DEVICES_SET_L 0x300
+#define RST_DEVICES_CLR_L 0x304
+#define RST_DEVICES_SET_H 0x308
+#define RST_DEVICES_CLR_H 0x30c
+#define RST_DEVICES_SET_U 0x310
+#define RST_DEVICES_CLR_U 0x314
+#define RST_DEVICES_SET_V 0x430
+#define RST_DEVICES_CLR_V 0x434
+#define RST_DEVICES_SET_W 0x438
+#define RST_DEVICES_CLR_W 0x43c
+#define RST_DEVICES_NUM 5
+
+#define CLK_OUT_ENB_L 0x010
+#define CLK_OUT_ENB_H 0x014
+#define CLK_OUT_ENB_U 0x018
+#define CLK_OUT_ENB_V 0x360
+#define CLK_OUT_ENB_W 0x364
+#define CLK_OUT_ENB_X 0x280
+#define CLK_OUT_ENB_SET_L 0x320
+#define CLK_OUT_ENB_CLR_L 0x324
+#define CLK_OUT_ENB_SET_H 0x328
+#define CLK_OUT_ENB_CLR_H 0x32c
+#define CLK_OUT_ENB_SET_U 0x330
+#define CLK_OUT_ENB_CLR_U 0x334
+#define CLK_OUT_ENB_SET_V 0x440
+#define CLK_OUT_ENB_CLR_V 0x444
+#define CLK_OUT_ENB_SET_W 0x448
+#define CLK_OUT_ENB_CLR_W 0x44c
+#define CLK_OUT_ENB_SET_X 0x284
+#define CLK_OUT_ENB_CLR_X 0x288
+#define CLK_OUT_ENB_NUM 6
+
+#define PLLC_BASE 0x80
+#define PLLC_MISC2 0x88
+#define PLLC_MISC 0x8c
+#define PLLC2_BASE 0x4e8
+#define PLLC2_MISC 0x4ec
+#define PLLC3_BASE 0x4fc
+#define PLLC3_MISC 0x500
+#define PLLM_BASE 0x90
+#define PLLM_MISC 0x9c
+#define PLLP_BASE 0xa0
+#define PLLP_MISC 0xac
+#define PLLX_BASE 0xe0
+#define PLLX_MISC 0xe4
+#define PLLX_MISC2 0x514
+#define PLLX_MISC3 0x518
+#define PLLD_BASE 0xd0
+#define PLLD_MISC 0xdc
+#define PLLD2_BASE 0x4b8
+#define PLLD2_MISC 0x4bc
+#define PLLE_BASE 0xe8
+#define PLLE_MISC 0xec
+#define PLLA_BASE 0xb0
+#define PLLA_MISC 0xbc
+#define PLLU_BASE 0xc0
+#define PLLU_MISC 0xcc
+#define PLLRE_BASE 0x4c4
+#define PLLRE_MISC 0x4c8
+
+#define PLL_MISC_LOCK_ENABLE 18
+#define PLLC_MISC_LOCK_ENABLE 24
+#define PLLDU_MISC_LOCK_ENABLE 22
+#define PLLE_MISC_LOCK_ENABLE 9
+#define PLLRE_MISC_LOCK_ENABLE 30
+
+#define PLLC_IDDQ_BIT 26
+#define PLLX_IDDQ_BIT 3
+#define PLLRE_IDDQ_BIT 16
+
+#define PLL_BASE_LOCK BIT(27)
+#define PLLE_MISC_LOCK BIT(11)
+#define PLLRE_MISC_LOCK BIT(24)
+#define PLLCX_BASE_LOCK (BIT(26)|BIT(27))
+
+#define PLLE_AUX 0x48c
+#define PLLC_OUT 0x84
+#define PLLM_OUT 0x94
+#define PLLP_OUTA 0xa4
+#define PLLP_OUTB 0xa8
+#define PLLA_OUT 0xb4
+
+#define AUDIO_SYNC_CLK_I2S0 0x4a0
+#define AUDIO_SYNC_CLK_I2S1 0x4a4
+#define AUDIO_SYNC_CLK_I2S2 0x4a8
+#define AUDIO_SYNC_CLK_I2S3 0x4ac
+#define AUDIO_SYNC_CLK_I2S4 0x4b0
+#define AUDIO_SYNC_CLK_SPDIF 0x4b4
+
+#define AUDIO_SYNC_DOUBLER 0x49c
+
+#define PMC_CLK_OUT_CNTRL 0x1a8
+#define PMC_DPD_PADS_ORIDE 0x1c
+#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20
+#define PMC_CTRL 0
+#define PMC_CTRL_BLINK_ENB 7
+
+#define OSC_CTRL 0x50
+#define OSC_CTRL_OSC_FREQ_SHIFT 28
+#define OSC_CTRL_PLL_REF_DIV_SHIFT 26
+
+#define PLLXC_SW_MAX_P 6
+
+#define CCLKG_BURST_POLICY 0x368
+#define CCLKLP_BURST_POLICY 0x370
+#define SCLK_BURST_POLICY 0x028
+#define SYSTEM_CLK_RATE 0x030
+
+#define UTMIP_PLL_CFG2 0x488
+#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
+#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
+
+#define UTMIP_PLL_CFG1 0x484
+#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
+#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
+#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
+#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
+
+#define UTMIPLL_HW_PWRDN_CFG0 0x52c
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
+#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
+#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
+#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
+#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
+
+#define CLK_SOURCE_I2S0 0x1d8
+#define CLK_SOURCE_I2S1 0x100
+#define CLK_SOURCE_I2S2 0x104
+#define CLK_SOURCE_NDFLASH 0x160
+#define CLK_SOURCE_I2S3 0x3bc
+#define CLK_SOURCE_I2S4 0x3c0
+#define CLK_SOURCE_SPDIF_OUT 0x108
+#define CLK_SOURCE_SPDIF_IN 0x10c
+#define CLK_SOURCE_PWM 0x110
+#define CLK_SOURCE_ADX 0x638
+#define CLK_SOURCE_AMX 0x63c
+#define CLK_SOURCE_HDA 0x428
+#define CLK_SOURCE_HDA2CODEC_2X 0x3e4
+#define CLK_SOURCE_SBC1 0x134
+#define CLK_SOURCE_SBC2 0x118
+#define CLK_SOURCE_SBC3 0x11c
+#define CLK_SOURCE_SBC4 0x1b4
+#define CLK_SOURCE_SBC5 0x3c8
+#define CLK_SOURCE_SBC6 0x3cc
+#define CLK_SOURCE_SATA_OOB 0x420
+#define CLK_SOURCE_SATA 0x424
+#define CLK_SOURCE_NDSPEED 0x3f8
+#define CLK_SOURCE_VFIR 0x168
+#define CLK_SOURCE_SDMMC1 0x150
+#define CLK_SOURCE_SDMMC2 0x154
+#define CLK_SOURCE_SDMMC3 0x1bc
+#define CLK_SOURCE_SDMMC4 0x164
+#define CLK_SOURCE_VDE 0x1c8
+#define CLK_SOURCE_CSITE 0x1d4
+#define CLK_SOURCE_LA 0x1f8
+#define CLK_SOURCE_TRACE 0x634
+#define CLK_SOURCE_OWR 0x1cc
+#define CLK_SOURCE_NOR 0x1d0
+#define CLK_SOURCE_MIPI 0x174
+#define CLK_SOURCE_I2C1 0x124
+#define CLK_SOURCE_I2C2 0x198
+#define CLK_SOURCE_I2C3 0x1b8
+#define CLK_SOURCE_I2C4 0x3c4
+#define CLK_SOURCE_I2C5 0x128
+#define CLK_SOURCE_UARTA 0x178
+#define CLK_SOURCE_UARTB 0x17c
+#define CLK_SOURCE_UARTC 0x1a0
+#define CLK_SOURCE_UARTD 0x1c0
+#define CLK_SOURCE_UARTE 0x1c4
+#define CLK_SOURCE_UARTA_DBG 0x178
+#define CLK_SOURCE_UARTB_DBG 0x17c
+#define CLK_SOURCE_UARTC_DBG 0x1a0
+#define CLK_SOURCE_UARTD_DBG 0x1c0
+#define CLK_SOURCE_UARTE_DBG 0x1c4
+#define CLK_SOURCE_3D 0x158
+#define CLK_SOURCE_2D 0x15c
+#define CLK_SOURCE_VI_SENSOR 0x1a8
+#define CLK_SOURCE_VI 0x148
+#define CLK_SOURCE_EPP 0x16c
+#define CLK_SOURCE_MSENC 0x1f0
+#define CLK_SOURCE_TSEC 0x1f4
+#define CLK_SOURCE_HOST1X 0x180
+#define CLK_SOURCE_HDMI 0x18c
+#define CLK_SOURCE_DISP1 0x138
+#define CLK_SOURCE_DISP2 0x13c
+#define CLK_SOURCE_CILAB 0x614
+#define CLK_SOURCE_CILCD 0x618
+#define CLK_SOURCE_CILE 0x61c
+#define CLK_SOURCE_DSIALP 0x620
+#define CLK_SOURCE_DSIBLP 0x624
+#define CLK_SOURCE_TSENSOR 0x3b8
+#define CLK_SOURCE_D_AUDIO 0x3d0
+#define CLK_SOURCE_DAM0 0x3d8
+#define CLK_SOURCE_DAM1 0x3dc
+#define CLK_SOURCE_DAM2 0x3e0
+#define CLK_SOURCE_ACTMON 0x3e8
+#define CLK_SOURCE_EXTERN1 0x3ec
+#define CLK_SOURCE_EXTERN2 0x3f0
+#define CLK_SOURCE_EXTERN3 0x3f4
+#define CLK_SOURCE_I2CSLOW 0x3fc
+#define CLK_SOURCE_SE 0x42c
+#define CLK_SOURCE_MSELECT 0x3b4
+#define CLK_SOURCE_SOC_THERM 0x644
+#define CLK_SOURCE_XUSB_HOST_SRC 0x600
+#define CLK_SOURCE_XUSB_FALCON_SRC 0x604
+#define CLK_SOURCE_XUSB_FS_SRC 0x608
+#define CLK_SOURCE_XUSB_SS_SRC 0x610
+#define CLK_SOURCE_XUSB_DEV_SRC 0x60c
+#define CLK_SOURCE_EMC 0x19c
+
+static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32];
+
+static void __iomem *clk_base;
+static void __iomem *pmc_base;
+
+static DEFINE_SPINLOCK(pll_d_lock);
+static DEFINE_SPINLOCK(pll_d2_lock);
+static DEFINE_SPINLOCK(pll_u_lock);
+static DEFINE_SPINLOCK(pll_div_lock);
+static DEFINE_SPINLOCK(pll_re_lock);
+static DEFINE_SPINLOCK(clk_doubler_lock);
+static DEFINE_SPINLOCK(clk_out_lock);
+static DEFINE_SPINLOCK(sysrate_lock);
+
+static struct pdiv_map pllxc_p[] = {
+ { .pdiv = 1, .hw_val = 0 },
+ { .pdiv = 2, .hw_val = 1 },
+ { .pdiv = 3, .hw_val = 2 },
+ { .pdiv = 4, .hw_val = 3 },
+ { .pdiv = 5, .hw_val = 4 },
+ { .pdiv = 6, .hw_val = 5 },
+ { .pdiv = 8, .hw_val = 6 },
+ { .pdiv = 10, .hw_val = 7 },
+ { .pdiv = 12, .hw_val = 8 },
+ { .pdiv = 16, .hw_val = 9 },
+ { .pdiv = 12, .hw_val = 10 },
+ { .pdiv = 16, .hw_val = 11 },
+ { .pdiv = 20, .hw_val = 12 },
+ { .pdiv = 24, .hw_val = 13 },
+ { .pdiv = 32, .hw_val = 14 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
+ { 12000000, 624000000, 104, 0, 2},
+ { 12000000, 600000000, 100, 0, 2},
+ { 13000000, 600000000, 92, 0, 2}, /* actual: 598.0 MHz */
+ { 16800000, 600000000, 71, 0, 2}, /* actual: 596.4 MHz */
+ { 19200000, 600000000, 62, 0, 2}, /* actual: 595.2 MHz */
+ { 26000000, 600000000, 92, 1, 2}, /* actual: 598.0 MHz */
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_params pll_c_params = {
+ .input_min = 12000000,
+ .input_max = 800000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */
+ .vco_min = 600000000,
+ .vco_max = 1400000000,
+ .base_reg = PLLC_BASE,
+ .misc_reg = PLLC_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLC_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .iddq_reg = PLLC_MISC,
+ .iddq_bit_idx = PLLC_IDDQ_BIT,
+ .max_p = PLLXC_SW_MAX_P,
+ .dyn_ramp_reg = PLLC_MISC2,
+ .stepa_shift = 17,
+ .stepb_shift = 9,
+ .pdiv_tohw = pllxc_p,
+};
+
+static struct pdiv_map pllc_p[] = {
+ { .pdiv = 1, .hw_val = 0 },
+ { .pdiv = 2, .hw_val = 1 },
+ { .pdiv = 4, .hw_val = 3 },
+ { .pdiv = 8, .hw_val = 5 },
+ { .pdiv = 16, .hw_val = 7 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_cx_freq_table[] = {
+ {12000000, 600000000, 100, 0, 2},
+ {13000000, 600000000, 92, 0, 2}, /* actual: 598.0 MHz */
+ {16800000, 600000000, 71, 0, 2}, /* actual: 596.4 MHz */
+ {19200000, 600000000, 62, 0, 2}, /* actual: 595.2 MHz */
+ {26000000, 600000000, 92, 1, 2}, /* actual: 598.0 MHz */
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_c2_params = {
+ .input_min = 12000000,
+ .input_max = 48000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000,
+ .vco_min = 600000000,
+ .vco_max = 1200000000,
+ .base_reg = PLLC2_BASE,
+ .misc_reg = PLLC2_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .pdiv_tohw = pllc_p,
+ .ext_misc_reg[0] = 0x4f0,
+ .ext_misc_reg[1] = 0x4f4,
+ .ext_misc_reg[2] = 0x4f8,
+};
+
+static struct tegra_clk_pll_params pll_c3_params = {
+ .input_min = 12000000,
+ .input_max = 48000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000,
+ .vco_min = 600000000,
+ .vco_max = 1200000000,
+ .base_reg = PLLC3_BASE,
+ .misc_reg = PLLC3_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .pdiv_tohw = pllc_p,
+ .ext_misc_reg[0] = 0x504,
+ .ext_misc_reg[1] = 0x508,
+ .ext_misc_reg[2] = 0x50c,
+};
+
+static struct pdiv_map pllm_p[] = {
+ { .pdiv = 1, .hw_val = 0 },
+ { .pdiv = 2, .hw_val = 1 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_m_freq_table[] = {
+ {12000000, 800000000, 66, 0, 1}, /* actual: 792.0 MHz */
+ {13000000, 800000000, 61, 0, 1}, /* actual: 793.0 MHz */
+ {16800000, 800000000, 47, 0, 1}, /* actual: 789.6 MHz */
+ {19200000, 800000000, 41, 0, 1}, /* actual: 787.2 MHz */
+ {26000000, 800000000, 61, 1, 1}, /* actual: 793.0 MHz */
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_m_params = {
+ .input_min = 12000000,
+ .input_max = 500000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */
+ .vco_min = 400000000,
+ .vco_max = 1066000000,
+ .base_reg = PLLM_BASE,
+ .misc_reg = PLLM_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .max_p = 2,
+ .pdiv_tohw = pllm_p,
+};
+
+static struct tegra_clk_pll_freq_table pll_p_freq_table[] = {
+ {12000000, 216000000, 432, 12, 1, 8},
+ {13000000, 216000000, 432, 13, 1, 8},
+ {16800000, 216000000, 360, 14, 1, 8},
+ {19200000, 216000000, 360, 16, 1, 8},
+ {26000000, 216000000, 432, 26, 1, 8},
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_p_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 200000000,
+ .vco_max = 700000000,
+ .base_reg = PLLP_BASE,
+ .misc_reg = PLLP_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_freq_table pll_a_freq_table[] = {
+ {9600000, 282240000, 147, 5, 0, 4},
+ {9600000, 368640000, 192, 5, 0, 4},
+ {9600000, 240000000, 200, 8, 0, 8},
+
+ {28800000, 282240000, 245, 25, 0, 8},
+ {28800000, 368640000, 320, 25, 0, 8},
+ {28800000, 240000000, 200, 24, 0, 8},
+ {0, 0, 0, 0, 0, 0},
+};
+
+
+static struct tegra_clk_pll_params pll_a_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 200000000,
+ .vco_max = 700000000,
+ .base_reg = PLLA_BASE,
+ .misc_reg = PLLA_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
+ {12000000, 216000000, 864, 12, 2, 12},
+ {13000000, 216000000, 864, 13, 2, 12},
+ {16800000, 216000000, 720, 14, 2, 12},
+ {19200000, 216000000, 720, 16, 2, 12},
+ {26000000, 216000000, 864, 26, 2, 12},
+
+ {12000000, 594000000, 594, 12, 0, 12},
+ {13000000, 594000000, 594, 13, 0, 12},
+ {16800000, 594000000, 495, 14, 0, 12},
+ {19200000, 594000000, 495, 16, 0, 12},
+ {26000000, 594000000, 594, 26, 0, 12},
+
+ {12000000, 1000000000, 1000, 12, 0, 12},
+ {13000000, 1000000000, 1000, 13, 0, 12},
+ {19200000, 1000000000, 625, 12, 0, 12},
+ {26000000, 1000000000, 1000, 26, 0, 12},
+
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_d_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 500000000,
+ .vco_max = 1000000000,
+ .base_reg = PLLD_BASE,
+ .misc_reg = PLLD_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+};
+
+static struct tegra_clk_pll_params pll_d2_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 500000000,
+ .vco_max = 1000000000,
+ .base_reg = PLLD2_BASE,
+ .misc_reg = PLLD2_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+};
+
+static struct pdiv_map pllu_p[] = {
+ { .pdiv = 1, .hw_val = 1 },
+ { .pdiv = 2, .hw_val = 0 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
+ {12000000, 480000000, 960, 12, 0, 12},
+ {13000000, 480000000, 960, 13, 0, 12},
+ {16800000, 480000000, 400, 7, 0, 5},
+ {19200000, 480000000, 200, 4, 0, 3},
+ {26000000, 480000000, 960, 26, 0, 12},
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_u_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 480000000,
+ .vco_max = 960000000,
+ .base_reg = PLLU_BASE,
+ .misc_reg = PLLU_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+ .pdiv_tohw = pllu_p,
+};
+
+static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
+ /* 1 GHz */
+ {12000000, 1000000000, 83, 0, 1}, /* actual: 996.0 MHz */
+ {13000000, 1000000000, 76, 0, 1}, /* actual: 988.0 MHz */
+ {16800000, 1000000000, 59, 0, 1}, /* actual: 991.2 MHz */
+ {19200000, 1000000000, 52, 0, 1}, /* actual: 998.4 MHz */
+ {26000000, 1000000000, 76, 1, 1}, /* actual: 988.0 MHz */
+
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_x_params = {
+ .input_min = 12000000,
+ .input_max = 800000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */
+ .vco_min = 700000000,
+ .vco_max = 2400000000U,
+ .base_reg = PLLX_BASE,
+ .misc_reg = PLLX_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .iddq_reg = PLLX_MISC3,
+ .iddq_bit_idx = PLLX_IDDQ_BIT,
+ .max_p = PLLXC_SW_MAX_P,
+ .dyn_ramp_reg = PLLX_MISC2,
+ .stepa_shift = 16,
+ .stepb_shift = 24,
+ .pdiv_tohw = pllxc_p,
+};
+
+static struct tegra_clk_pll_freq_table pll_e_freq_table[] = {
+ /* PLLE special case: use cpcon field to store cml divider value */
+ {336000000, 100000000, 100, 21, 16, 11},
+ {312000000, 100000000, 200, 26, 24, 13},
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_e_params = {
+ .input_min = 12000000,
+ .input_max = 1000000000,
+ .cf_min = 12000000,
+ .cf_max = 75000000,
+ .vco_min = 1600000000,
+ .vco_max = 2400000000U,
+ .base_reg = PLLE_BASE,
+ .misc_reg = PLLE_MISC,
+ .aux_reg = PLLE_AUX,
+ .lock_mask = PLLE_MISC_LOCK,
+ .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_params pll_re_vco_params = {
+ .input_min = 12000000,
+ .input_max = 1000000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 38 MHz */
+ .vco_min = 300000000,
+ .vco_max = 600000000,
+ .base_reg = PLLRE_BASE,
+ .misc_reg = PLLRE_MISC,
+ .lock_mask = PLLRE_MISC_LOCK,
+ .lock_enable_bit_idx = PLLRE_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .iddq_reg = PLLRE_MISC,
+ .iddq_bit_idx = PLLRE_IDDQ_BIT,
+};
+
+/* Peripheral clock registers */
+
+static struct tegra_clk_periph_regs periph_l_regs = {
+ .enb_reg = CLK_OUT_ENB_L,
+ .enb_set_reg = CLK_OUT_ENB_SET_L,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_L,
+ .rst_reg = RST_DEVICES_L,
+ .rst_set_reg = RST_DEVICES_SET_L,
+ .rst_clr_reg = RST_DEVICES_CLR_L,
+};
+
+static struct tegra_clk_periph_regs periph_h_regs = {
+ .enb_reg = CLK_OUT_ENB_H,
+ .enb_set_reg = CLK_OUT_ENB_SET_H,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_H,
+ .rst_reg = RST_DEVICES_H,
+ .rst_set_reg = RST_DEVICES_SET_H,
+ .rst_clr_reg = RST_DEVICES_CLR_H,
+};
+
+static struct tegra_clk_periph_regs periph_u_regs = {
+ .enb_reg = CLK_OUT_ENB_U,
+ .enb_set_reg = CLK_OUT_ENB_SET_U,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_U,
+ .rst_reg = RST_DEVICES_U,
+ .rst_set_reg = RST_DEVICES_SET_U,
+ .rst_clr_reg = RST_DEVICES_CLR_U,
+};
+
+static struct tegra_clk_periph_regs periph_v_regs = {
+ .enb_reg = CLK_OUT_ENB_V,
+ .enb_set_reg = CLK_OUT_ENB_SET_V,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_V,
+ .rst_reg = RST_DEVICES_V,
+ .rst_set_reg = RST_DEVICES_SET_V,
+ .rst_clr_reg = RST_DEVICES_CLR_V,
+};
+
+static struct tegra_clk_periph_regs periph_w_regs = {
+ .enb_reg = CLK_OUT_ENB_W,
+ .enb_set_reg = CLK_OUT_ENB_SET_W,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_W,
+ .rst_reg = RST_DEVICES_W,
+ .rst_set_reg = RST_DEVICES_SET_W,
+ .rst_clr_reg = RST_DEVICES_CLR_W,
+};
+
+/* possible OSC frequencies in Hz */
+static unsigned long tegra114_input_freq[] = {
+ [0] = 13000000,
+ [1] = 16800000,
+ [4] = 19200000,
+ [5] = 38400000,
+ [8] = 12000000,
+ [9] = 48000000,
+ [12] = 260000000,
+};
+
+#define MASK(x) (BIT(x) - 1)
+
+#define TEGRA_INIT_DATA_MUX(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 30, MASK(2), 0, 0, 8, 1, 0, _regs, _clk_num, \
+ periph_clk_enb_refcnt, _gate_flags, _clk_id, \
+ _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_MUX_FLAGS(_name, _con_id, _dev_id, _parents, _offset,\
+ _clk_num, _regs, _gate_flags, _clk_id, flags)\
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 30, MASK(2), 0, 0, 8, 1, 0, _regs, _clk_num, \
+ periph_clk_enb_refcnt, _gate_flags, _clk_id, \
+ _parents##_idx, flags)
+
+#define TEGRA_INIT_DATA_MUX8(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 29, MASK(3), 0, 0, 8, 1, 0, _regs, _clk_num, \
+ periph_clk_enb_refcnt, _gate_flags, _clk_id, \
+ _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_INT(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id, _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_INT_FLAGS(_name, _con_id, _dev_id, _parents, _offset,\
+ _clk_num, _regs, _gate_flags, _clk_id, flags)\
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id, _parents##_idx, flags)
+
+#define TEGRA_INIT_DATA_INT8(_name, _con_id, _dev_id, _parents, _offset,\
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id, _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_UART(_name, _con_id, _dev_id, _parents, _offset,\
+ _clk_num, _regs, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 30, MASK(2), 0, 0, 16, 1, TEGRA_DIVIDER_UART, _regs,\
+ _clk_num, periph_clk_enb_refcnt, 0, _clk_id, \
+ _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_I2C(_name, _con_id, _dev_id, _parents, _offset,\
+ _clk_num, _regs, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 30, MASK(2), 0, 0, 16, 0, 0, _regs, _clk_num, \
+ periph_clk_enb_refcnt, 0, _clk_id, _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_NODIV(_name, _con_id, _dev_id, _parents, _offset, \
+ _mux_shift, _mux_mask, _clk_num, _regs, \
+ _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ _mux_shift, _mux_mask, 0, 0, 0, 0, 0, _regs, \
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id, _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_XUSB(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset, \
+ 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs, \
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id, _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_AUDIO(_name, _con_id, _dev_id, _offset, _clk_num,\
+ _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, mux_d_audio_clk, \
+ _offset, 16, 0xE01F, 0, 0, 8, 1, 0, _regs, _clk_num, \
+ periph_clk_enb_refcnt, _gate_flags , _clk_id, \
+ mux_d_audio_clk_idx, 0)
+
+enum tegra114_clk {
+ rtc = 4, timer = 5, uarta = 6, sdmmc2 = 9, i2s1 = 11, i2c1 = 12,
+ ndflash = 13, sdmmc1 = 14, sdmmc4 = 15, pwm = 17, i2s2 = 18, epp = 19,
+ gr_2d = 21, usbd = 22, isp = 23, gr_3d = 24, disp2 = 26, disp1 = 27,
+ host1x = 28, vcp = 29, i2s0 = 30, apbdma = 34, kbc = 36, kfuse = 40,
+ sbc1 = 41, nor = 42, sbc2 = 44, sbc3 = 46, i2c5 = 47, dsia = 48,
+ mipi = 50, hdmi = 51, csi = 52, i2c2 = 54, uartc = 55, mipi_cal = 56,
+ emc, usb2, usb3, vde = 61, bsea = 62, bsev = 63, uartd = 65,
+ i2c3 = 67, sbc4 = 68, sdmmc3 = 69, owr = 71, csite = 73,
+ la = 76, trace = 77, soc_therm = 78, dtv = 79, ndspeed = 80,
+ i2cslow = 81, dsib = 82, tsec = 83, xusb_host = 89, msenc = 91,
+ csus = 92, mselect = 99, tsensor = 100, i2s3 = 101, i2s4 = 102,
+ i2c4 = 103, sbc5 = 104, sbc6 = 105, d_audio, apbif = 107, dam0, dam1,
+ dam2, hda2codec_2x = 111, audio0_2x = 113, audio1_2x, audio2_2x,
+ audio3_2x, audio4_2x, spdif_2x, actmon = 119, extern1 = 120,
+ extern2 = 121, extern3 = 122, hda = 125, se = 127, hda2hdmi = 128,
+ cilab = 144, cilcd = 145, cile = 146, dsialp = 147, dsiblp = 148,
+ dds = 150, dp2 = 152, amx = 153, adx = 154, xusb_ss = 156, uartb = 192,
+ vfir, spdif_in, spdif_out, vi, vi_sensor, fuse, fuse_burn, clk_32k,
+ clk_m, clk_m_div2, clk_m_div4, pll_ref, pll_c, pll_c_out1, pll_c2,
+ pll_c3, pll_m, pll_m_out1, pll_p, pll_p_out1, pll_p_out2, pll_p_out3,
+ pll_p_out4, pll_a, pll_a_out0, pll_d, pll_d_out0, pll_d2, pll_d2_out0,
+ pll_u, pll_u_480M, pll_u_60M, pll_u_48M, pll_u_12M, pll_x, pll_x_out0,
+ pll_re_vco, pll_re_out, pll_e_out0, spdif_in_sync, i2s0_sync,
+ i2s1_sync, i2s2_sync, i2s3_sync, i2s4_sync, vimclk_sync, audio0,
+ audio1, audio2, audio3, audio4, spdif, clk_out_1, clk_out_2, clk_out_3,
+ blink, xusb_host_src = 252, xusb_falcon_src, xusb_fs_src, xusb_ss_src,
+ xusb_dev_src, xusb_dev, xusb_hs_src, sclk, hclk, pclk, cclk_g, cclk_lp,
+
+ /* Mux clocks */
+
+ audio0_mux = 300, audio1_mux, audio2_mux, audio3_mux, audio4_mux,
+ spdif_mux, clk_out_1_mux, clk_out_2_mux, clk_out_3_mux, dsia_mux,
+ dsib_mux, clk_max,
+};
+
+struct utmi_clk_param {
+ /* Oscillator Frequency in KHz */
+ u32 osc_frequency;
+ /* UTMIP PLL Enable Delay Count */
+ u8 enable_delay_count;
+ /* UTMIP PLL Stable count */
+ u8 stable_count;
+ /* UTMIP PLL Active delay count */
+ u8 active_delay_count;
+ /* UTMIP PLL Xtal frequency count */
+ u8 xtal_freq_count;
+};
+
+static const struct utmi_clk_param utmi_parameters[] = {
+ {.osc_frequency = 13000000, .enable_delay_count = 0x02,
+ .stable_count = 0x33, .active_delay_count = 0x05,
+ .xtal_freq_count = 0x7F},
+ {.osc_frequency = 19200000, .enable_delay_count = 0x03,
+ .stable_count = 0x4B, .active_delay_count = 0x06,
+ .xtal_freq_count = 0xBB},
+ {.osc_frequency = 12000000, .enable_delay_count = 0x02,
+ .stable_count = 0x2F, .active_delay_count = 0x04,
+ .xtal_freq_count = 0x76},
+ {.osc_frequency = 26000000, .enable_delay_count = 0x04,
+ .stable_count = 0x66, .active_delay_count = 0x09,
+ .xtal_freq_count = 0xFE},
+ {.osc_frequency = 16800000, .enable_delay_count = 0x03,
+ .stable_count = 0x41, .active_delay_count = 0x0A,
+ .xtal_freq_count = 0xA4},
+};
+
+/* peripheral mux definitions */
+
+#define MUX_I2S_SPDIF(_id) \
+static const char *mux_pllaout0_##_id##_2x_pllp_clkm[] = { "pll_a_out0", \
+ #_id, "pll_p",\
+ "clk_m"};
+MUX_I2S_SPDIF(audio0)
+MUX_I2S_SPDIF(audio1)
+MUX_I2S_SPDIF(audio2)
+MUX_I2S_SPDIF(audio3)
+MUX_I2S_SPDIF(audio4)
+MUX_I2S_SPDIF(audio)
+
+#define mux_pllaout0_audio0_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio1_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio2_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio3_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio4_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio_2x_pllp_clkm_idx NULL
+
+static const char *mux_pllp_pllc_pllm_clkm[] = {
+ "pll_p", "pll_c", "pll_m", "clk_m"
+};
+#define mux_pllp_pllc_pllm_clkm_idx NULL
+
+static const char *mux_pllp_pllc_pllm[] = { "pll_p", "pll_c", "pll_m" };
+#define mux_pllp_pllc_pllm_idx NULL
+
+static const char *mux_pllp_pllc_clk32_clkm[] = {
+ "pll_p", "pll_c", "clk_32k", "clk_m"
+};
+#define mux_pllp_pllc_clk32_clkm_idx NULL
+
+static const char *mux_plla_pllc_pllp_clkm[] = {
+ "pll_a_out0", "pll_c", "pll_p", "clk_m"
+};
+#define mux_plla_pllc_pllp_clkm_idx mux_pllp_pllc_pllm_clkm_idx
+
+static const char *mux_pllp_pllc2_c_c3_pllm_clkm[] = {
+ "pll_p", "pll_c2", "pll_c", "pll_c3", "pll_m", "clk_m"
+};
+static u32 mux_pllp_pllc2_c_c3_pllm_clkm_idx[] = {
+ [0] = 0, [1] = 1, [2] = 2, [3] = 3, [4] = 4, [5] = 6,
+};
+
+static const char *mux_pllp_clkm[] = {
+ "pll_p", "clk_m"
+};
+static u32 mux_pllp_clkm_idx[] = {
+ [0] = 0, [1] = 3,
+};
+
+static const char *mux_pllm_pllc2_c_c3_pllp_plla[] = {
+ "pll_m", "pll_c2", "pll_c", "pll_c3", "pll_p", "pll_a_out0"
+};
+#define mux_pllm_pllc2_c_c3_pllp_plla_idx mux_pllp_pllc2_c_c3_pllm_clkm_idx
+
+static const char *mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = {
+ "pll_p", "pll_m", "pll_d_out0", "pll_a_out0", "pll_c",
+ "pll_d2_out0", "clk_m"
+};
+#define mux_pllp_pllm_plld_plla_pllc_plld2_clkm_idx NULL
+
+static const char *mux_pllm_pllc_pllp_plla[] = {
+ "pll_m", "pll_c", "pll_p", "pll_a_out0"
+};
+#define mux_pllm_pllc_pllp_plla_idx mux_pllp_pllc_pllm_clkm_idx
+
+static const char *mux_pllp_pllc_clkm[] = {
+ "pll_p", "pll_c", "pll_m"
+};
+static u32 mux_pllp_pllc_clkm_idx[] = {
+ [0] = 0, [1] = 1, [2] = 3,
+};
+
+static const char *mux_pllp_pllc_clkm_clk32[] = {
+ "pll_p", "pll_c", "clk_m", "clk_32k"
+};
+#define mux_pllp_pllc_clkm_clk32_idx NULL
+
+static const char *mux_plla_clk32_pllp_clkm_plle[] = {
+ "pll_a_out0", "clk_32k", "pll_p", "clk_m", "pll_e_out0"
+};
+#define mux_plla_clk32_pllp_clkm_plle_idx NULL
+
+static const char *mux_clkm_pllp_pllc_pllre[] = {
+ "clk_m", "pll_p", "pll_c", "pll_re_out"
+};
+static u32 mux_clkm_pllp_pllc_pllre_idx[] = {
+ [0] = 0, [1] = 1, [2] = 3, [3] = 5,
+};
+
+static const char *mux_clkm_48M_pllp_480M[] = {
+ "clk_m", "pll_u_48M", "pll_p", "pll_u_480M"
+};
+#define mux_clkm_48M_pllp_480M_idx NULL
+
+static const char *mux_clkm_pllre_clk32_480M_pllc_ref[] = {
+ "clk_m", "pll_re_out", "clk_32k", "pll_u_480M", "pll_c", "pll_ref"
+};
+static u32 mux_clkm_pllre_clk32_480M_pllc_ref_idx[] = {
+ [0] = 0, [1] = 1, [2] = 3, [3] = 3, [4] = 4, [5] = 7,
+};
+
+static const char *mux_plld_out0_plld2_out0[] = {
+ "pll_d_out0", "pll_d2_out0",
+};
+#define mux_plld_out0_plld2_out0_idx NULL
+
+static const char *mux_d_audio_clk[] = {
+ "pll_a_out0", "pll_p", "clk_m", "spdif_in_sync", "i2s0_sync",
+ "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",
+};
+static u32 mux_d_audio_clk_idx[] = {
+ [0] = 0, [1] = 0x8000, [2] = 0xc000, [3] = 0xE000, [4] = 0xE001,
+ [5] = 0xE002, [6] = 0xE003, [7] = 0xE004, [8] = 0xE005, [9] = 0xE007,
+};
+
+static const char *mux_pllmcp_clkm[] = {
+ "pll_m_out0", "pll_c_out0", "pll_p_out0", "clk_m", "pll_m_ud",
+};
+
+static const struct clk_div_table pll_re_div_table[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 3 },
+ { .val = 3, .div = 4 },
+ { .val = 4, .div = 5 },
+ { .val = 5, .div = 6 },
+ { .val = 0, .div = 0 },
+};
+
+static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
+
+static unsigned long osc_freq;
+static unsigned long pll_ref_freq;
+
+static int __init tegra114_osc_clk_init(void __iomem *clk_base)
+{
+ struct clk *clk;
+ u32 val, pll_ref_div;
+
+ val = readl_relaxed(clk_base + OSC_CTRL);
+
+ osc_freq = tegra114_input_freq[val >> OSC_CTRL_OSC_FREQ_SHIFT];
+ if (!osc_freq) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ /* clk_m */
+ clk = clk_register_fixed_rate(NULL, "clk_m", NULL, CLK_IS_ROOT,
+ osc_freq);
+ clk_register_clkdev(clk, "clk_m", NULL);
+ clks[clk_m] = clk;
+
+ /* pll_ref */
+ val = (val >> OSC_CTRL_PLL_REF_DIV_SHIFT) & 3;
+ pll_ref_div = 1 << val;
+ clk = clk_register_fixed_factor(NULL, "pll_ref", "clk_m",
+ CLK_SET_RATE_PARENT, 1, pll_ref_div);
+ clk_register_clkdev(clk, "pll_ref", NULL);
+ clks[pll_ref] = clk;
+
+ pll_ref_freq = osc_freq / pll_ref_div;
+
+ return 0;
+}
+
+static void __init tegra114_fixed_clk_init(void __iomem *clk_base)
+{
+ struct clk *clk;
+
+ /* clk_32k */
+ clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, CLK_IS_ROOT,
+ 32768);
+ clk_register_clkdev(clk, "clk_32k", NULL);
+ clks[clk_32k] = clk;
+
+ /* clk_m_div2 */
+ clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "clk_m_div2", NULL);
+ clks[clk_m_div2] = clk;
+
+ /* clk_m_div4 */
+ clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m",
+ CLK_SET_RATE_PARENT, 1, 4);
+ clk_register_clkdev(clk, "clk_m_div4", NULL);
+ clks[clk_m_div4] = clk;
+
+}
+
+static __init void tegra114_utmi_param_configure(void __iomem *clk_base)
+{
+ u32 reg;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
+ if (osc_freq == utmi_parameters[i].osc_frequency)
+ break;
+ }
+
+ if (i >= ARRAY_SIZE(utmi_parameters)) {
+ pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
+ osc_freq);
+ return;
+ }
+
+ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
+
+ /* Program UTMIP PLL stable and active counts */
+ /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
+ reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
+ reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
+
+ reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
+
+ reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
+ active_delay_count);
+
+ /* Remove power downs from UTMIP PLL control bits */
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
+
+ writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
+
+ /* Program UTMIP PLL delay and oscillator frequency counts */
+ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
+ reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
+
+ reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
+ enable_delay_count);
+
+ reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
+ reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
+ xtal_freq_count);
+
+ /* Remove power downs from UTMIP PLL control bits */
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
+ writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
+
+ /* Setup HW control of UTMIPLL */
+ reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
+ reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
+ reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
+ writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
+
+ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
+
+ udelay(1);
+
+ /* Setup SW override of UTMIPLL assuming USB2.0
+ ports are assigned to USB2 */
+ reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
+ reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
+ writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
+
+ udelay(1);
+
+ /* Enable HW control UTMIPLL */
+ reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
+ writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
+}
+
+static void __init _clip_vco_min(struct tegra_clk_pll_params *pll_params)
+{
+ pll_params->vco_min =
+ DIV_ROUND_UP(pll_params->vco_min, pll_ref_freq) * pll_ref_freq;
+}
+
+static int __init _setup_dynamic_ramp(struct tegra_clk_pll_params *pll_params,
+ void __iomem *clk_base)
+{
+ u32 val;
+ u32 step_a, step_b;
+
+ switch (pll_ref_freq) {
+ case 12000000:
+ case 13000000:
+ case 26000000:
+ step_a = 0x2B;
+ step_b = 0x0B;
+ break;
+ case 16800000:
+ step_a = 0x1A;
+ step_b = 0x09;
+ break;
+ case 19200000:
+ step_a = 0x12;
+ step_b = 0x08;
+ break;
+ default:
+ pr_err("%s: Unexpected reference rate %lu\n",
+ __func__, pll_ref_freq);
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ val = step_a << pll_params->stepa_shift;
+ val |= step_b << pll_params->stepb_shift;
+ writel_relaxed(val, clk_base + pll_params->dyn_ramp_reg);
+
+ return 0;
+}
+
+static void __init _init_iddq(struct tegra_clk_pll_params *pll_params,
+ void __iomem *clk_base)
+{
+ u32 val, val_iddq;
+
+ val = readl_relaxed(clk_base + pll_params->base_reg);
+ val_iddq = readl_relaxed(clk_base + pll_params->iddq_reg);
+
+ if (val & BIT(30))
+ WARN_ON(val_iddq & BIT(pll_params->iddq_bit_idx));
+ else {
+ val_iddq |= BIT(pll_params->iddq_bit_idx);
+ writel_relaxed(val_iddq, clk_base + pll_params->iddq_reg);
+ }
+}
+
+static void __init tegra114_pll_init(void __iomem *clk_base,
+ void __iomem *pmc)
+{
+ u32 val;
+ struct clk *clk;
+
+ /* PLLC */
+ _clip_vco_min(&pll_c_params);
+ if (_setup_dynamic_ramp(&pll_c_params, clk_base) >= 0) {
+ _init_iddq(&pll_c_params, clk_base);
+ clk = tegra_clk_register_pllxc("pll_c", "pll_ref", clk_base,
+ pmc, 0, 0, &pll_c_params, TEGRA_PLL_USE_LOCK,
+ pll_c_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_c", NULL);
+ clks[pll_c] = clk;
+
+ /* PLLC_OUT1 */
+ clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c",
+ clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div",
+ clk_base + PLLC_OUT, 1, 0,
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clk_register_clkdev(clk, "pll_c_out1", NULL);
+ clks[pll_c_out1] = clk;
+ }
+
+ /* PLLC2 */
+ _clip_vco_min(&pll_c2_params);
+ clk = tegra_clk_register_pllc("pll_c2", "pll_ref", clk_base, pmc, 0, 0,
+ &pll_c2_params, TEGRA_PLL_USE_LOCK,
+ pll_cx_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_c2", NULL);
+ clks[pll_c2] = clk;
+
+ /* PLLC3 */
+ _clip_vco_min(&pll_c3_params);
+ clk = tegra_clk_register_pllc("pll_c3", "pll_ref", clk_base, pmc, 0, 0,
+ &pll_c3_params, TEGRA_PLL_USE_LOCK,
+ pll_cx_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_c3", NULL);
+ clks[pll_c3] = clk;
+
+ /* PLLP */
+ clk = tegra_clk_register_pll("pll_p", "pll_ref", clk_base, pmc, 0,
+ 408000000, &pll_p_params,
+ TEGRA_PLL_FIXED | TEGRA_PLL_USE_LOCK,
+ pll_p_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_p", NULL);
+ clks[pll_p] = clk;
+
+ /* PLLP_OUT1 */
+ clk = tegra_clk_register_divider("pll_p_out1_div", "pll_p",
+ clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED |
+ TEGRA_DIVIDER_ROUND_UP, 8, 8, 1, &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out1", "pll_p_out1_div",
+ clk_base + PLLP_OUTA, 1, 0,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out1", NULL);
+ clks[pll_p_out1] = clk;
+
+ /* PLLP_OUT2 */
+ clk = tegra_clk_register_divider("pll_p_out2_div", "pll_p",
+ clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED |
+ TEGRA_DIVIDER_ROUND_UP, 24, 8, 1,
+ &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out2", "pll_p_out2_div",
+ clk_base + PLLP_OUTA, 17, 16,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out2", NULL);
+ clks[pll_p_out2] = clk;
+
+ /* PLLP_OUT3 */
+ clk = tegra_clk_register_divider("pll_p_out3_div", "pll_p",
+ clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED |
+ TEGRA_DIVIDER_ROUND_UP, 8, 8, 1, &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out3", "pll_p_out3_div",
+ clk_base + PLLP_OUTB, 1, 0,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out3", NULL);
+ clks[pll_p_out3] = clk;
+
+ /* PLLP_OUT4 */
+ clk = tegra_clk_register_divider("pll_p_out4_div", "pll_p",
+ clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED |
+ TEGRA_DIVIDER_ROUND_UP, 24, 8, 1,
+ &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out4", "pll_p_out4_div",
+ clk_base + PLLP_OUTB, 17, 16,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out4", NULL);
+ clks[pll_p_out4] = clk;
+
+ /* PLLM */
+ _clip_vco_min(&pll_m_params);
+ clk = tegra_clk_register_pllm("pll_m", "pll_ref", clk_base, pmc,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, 0,
+ &pll_m_params, TEGRA_PLL_USE_LOCK,
+ pll_m_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_m", NULL);
+ clks[pll_m] = clk;
+
+ /* PLLM_OUT1 */
+ clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m",
+ clk_base + PLLM_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_m_out1", "pll_m_out1_div",
+ clk_base + PLLM_OUT, 1, 0, CLK_IGNORE_UNUSED |
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clk_register_clkdev(clk, "pll_m_out1", NULL);
+ clks[pll_m_out1] = clk;
+
+ /* PLLM_UD */
+ clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m",
+ CLK_SET_RATE_PARENT, 1, 1);
+
+ /* PLLX */
+ _clip_vco_min(&pll_x_params);
+ if (_setup_dynamic_ramp(&pll_x_params, clk_base) >= 0) {
+ _init_iddq(&pll_x_params, clk_base);
+ clk = tegra_clk_register_pllxc("pll_x", "pll_ref", clk_base,
+ pmc, CLK_IGNORE_UNUSED, 0, &pll_x_params,
+ TEGRA_PLL_USE_LOCK, pll_x_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_x", NULL);
+ clks[pll_x] = clk;
+ }
+
+ /* PLLX_OUT0 */
+ clk = clk_register_fixed_factor(NULL, "pll_x_out0", "pll_x",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll_x_out0", NULL);
+ clks[pll_x_out0] = clk;
+
+ /* PLLU */
+ val = readl(clk_base + pll_u_params.base_reg);
+ val &= ~BIT(24); /* disable PLLU_OVERRIDE */
+ writel(val, clk_base + pll_u_params.base_reg);
+
+ clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
+ 0, &pll_u_params, TEGRA_PLLU |
+ TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK, pll_u_freq_table, &pll_u_lock);
+ clk_register_clkdev(clk, "pll_u", NULL);
+ clks[pll_u] = clk;
+
+ tegra114_utmi_param_configure(clk_base);
+
+ /* PLLU_480M */
+ clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
+ CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
+ 22, 0, &pll_u_lock);
+ clk_register_clkdev(clk, "pll_u_480M", NULL);
+ clks[pll_u_480M] = clk;
+
+ /* PLLU_60M */
+ clk = clk_register_fixed_factor(NULL, "pll_u_60M", "pll_u",
+ CLK_SET_RATE_PARENT, 1, 8);
+ clk_register_clkdev(clk, "pll_u_60M", NULL);
+ clks[pll_u_60M] = clk;
+
+ /* PLLU_48M */
+ clk = clk_register_fixed_factor(NULL, "pll_u_48M", "pll_u",
+ CLK_SET_RATE_PARENT, 1, 10);
+ clk_register_clkdev(clk, "pll_u_48M", NULL);
+ clks[pll_u_48M] = clk;
+
+ /* PLLU_12M */
+ clk = clk_register_fixed_factor(NULL, "pll_u_12M", "pll_u",
+ CLK_SET_RATE_PARENT, 1, 40);
+ clk_register_clkdev(clk, "pll_u_12M", NULL);
+ clks[pll_u_12M] = clk;
+
+ /* PLLD */
+ clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc, 0,
+ 0, &pll_d_params,
+ TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK, pll_d_freq_table, &pll_d_lock);
+ clk_register_clkdev(clk, "pll_d", NULL);
+ clks[pll_d] = clk;
+
+ /* PLLD_OUT0 */
+ clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll_d_out0", NULL);
+ clks[pll_d_out0] = clk;
+
+ /* PLLD2 */
+ clk = tegra_clk_register_pll("pll_d2", "pll_ref", clk_base, pmc, 0,
+ 0, &pll_d2_params,
+ TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK, pll_d_freq_table, &pll_d2_lock);
+ clk_register_clkdev(clk, "pll_d2", NULL);
+ clks[pll_d2] = clk;
+
+ /* PLLD2_OUT0 */
+ clk = clk_register_fixed_factor(NULL, "pll_d2_out0", "pll_d2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll_d2_out0", NULL);
+ clks[pll_d2_out0] = clk;
+
+ /* PLLA */
+ clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base, pmc, 0,
+ 0, &pll_a_params, TEGRA_PLL_HAS_CPCON |
+ TEGRA_PLL_USE_LOCK, pll_a_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_a", NULL);
+ clks[pll_a] = clk;
+
+ /* PLLA_OUT0 */
+ clk = tegra_clk_register_divider("pll_a_out0_div", "pll_a",
+ clk_base + PLLA_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_a_out0", "pll_a_out0_div",
+ clk_base + PLLA_OUT, 1, 0, CLK_IGNORE_UNUSED |
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clk_register_clkdev(clk, "pll_a_out0", NULL);
+ clks[pll_a_out0] = clk;
+
+ /* PLLRE */
+ _clip_vco_min(&pll_re_vco_params);
+ clk = tegra_clk_register_pllre("pll_re_vco", "pll_ref", clk_base, pmc,
+ 0, 0, &pll_re_vco_params, TEGRA_PLL_USE_LOCK,
+ NULL, &pll_re_lock, pll_ref_freq);
+ clk_register_clkdev(clk, "pll_re_vco", NULL);
+ clks[pll_re_vco] = clk;
+
+ clk = clk_register_divider_table(NULL, "pll_re_out", "pll_re_vco", 0,
+ clk_base + PLLRE_BASE, 16, 4, 0,
+ pll_re_div_table, &pll_re_lock);
+ clk_register_clkdev(clk, "pll_re_out", NULL);
+ clks[pll_re_out] = clk;
+
+ /* PLLE */
+ clk = tegra_clk_register_plle_tegra114("pll_e_out0", "pll_re_vco",
+ clk_base, 0, 100000000, &pll_e_params,
+ pll_e_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_e_out0", NULL);
+ clks[pll_e_out0] = clk;
+}
+
+static const char *mux_audio_sync_clk[] = { "spdif_in_sync", "i2s0_sync",
+ "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",
+};
+
+static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2",
+ "clk_m_div4", "extern1",
+};
+
+static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2",
+ "clk_m_div4", "extern2",
+};
+
+static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2",
+ "clk_m_div4", "extern3",
+};
+
+static void __init tegra114_audio_clk_init(void __iomem *clk_base)
+{
+ struct clk *clk;
+
+ /* spdif_in_sync */
+ clk = tegra_clk_register_sync_source("spdif_in_sync", 24000000,
+ 24000000);
+ clk_register_clkdev(clk, "spdif_in_sync", NULL);
+ clks[spdif_in_sync] = clk;
+
+ /* i2s0_sync */
+ clk = tegra_clk_register_sync_source("i2s0_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s0_sync", NULL);
+ clks[i2s0_sync] = clk;
+
+ /* i2s1_sync */
+ clk = tegra_clk_register_sync_source("i2s1_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s1_sync", NULL);
+ clks[i2s1_sync] = clk;
+
+ /* i2s2_sync */
+ clk = tegra_clk_register_sync_source("i2s2_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s2_sync", NULL);
+ clks[i2s2_sync] = clk;
+
+ /* i2s3_sync */
+ clk = tegra_clk_register_sync_source("i2s3_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s3_sync", NULL);
+ clks[i2s3_sync] = clk;
+
+ /* i2s4_sync */
+ clk = tegra_clk_register_sync_source("i2s4_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s4_sync", NULL);
+ clks[i2s4_sync] = clk;
+
+ /* vimclk_sync */
+ clk = tegra_clk_register_sync_source("vimclk_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "vimclk_sync", NULL);
+ clks[vimclk_sync] = clk;
+
+ /* audio0 */
+ clk = clk_register_mux(NULL, "audio0_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S0, 0, 3, 0,
+ NULL);
+ clks[audio0_mux] = clk;
+ clk = clk_register_gate(NULL, "audio0", "audio0_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S0, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio0", NULL);
+ clks[audio0] = clk;
+
+ /* audio1 */
+ clk = clk_register_mux(NULL, "audio1_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S1, 0, 3, 0,
+ NULL);
+ clks[audio1_mux] = clk;
+ clk = clk_register_gate(NULL, "audio1", "audio1_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S1, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio1", NULL);
+ clks[audio1] = clk;
+
+ /* audio2 */
+ clk = clk_register_mux(NULL, "audio2_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S2, 0, 3, 0,
+ NULL);
+ clks[audio2_mux] = clk;
+ clk = clk_register_gate(NULL, "audio2", "audio2_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S2, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio2", NULL);
+ clks[audio2] = clk;
+
+ /* audio3 */
+ clk = clk_register_mux(NULL, "audio3_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S3, 0, 3, 0,
+ NULL);
+ clks[audio3_mux] = clk;
+ clk = clk_register_gate(NULL, "audio3", "audio3_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S3, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio3", NULL);
+ clks[audio3] = clk;
+
+ /* audio4 */
+ clk = clk_register_mux(NULL, "audio4_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S4, 0, 3, 0,
+ NULL);
+ clks[audio4_mux] = clk;
+ clk = clk_register_gate(NULL, "audio4", "audio4_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S4, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio4", NULL);
+ clks[audio4] = clk;
+
+ /* spdif */
+ clk = clk_register_mux(NULL, "spdif_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_SPDIF, 0, 3, 0,
+ NULL);
+ clks[spdif_mux] = clk;
+ clk = clk_register_gate(NULL, "spdif", "spdif_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_SPDIF, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "spdif", NULL);
+ clks[spdif] = clk;
+
+ /* audio0_2x */
+ clk = clk_register_fixed_factor(NULL, "audio0_doubler", "audio0",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio0_div", "audio0_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 24, 1,
+ 0, &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio0_2x", "audio0_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 113, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio0_2x", NULL);
+ clks[audio0_2x] = clk;
+
+ /* audio1_2x */
+ clk = clk_register_fixed_factor(NULL, "audio1_doubler", "audio1",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio1_div", "audio1_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 25, 1,
+ 0, &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio1_2x", "audio1_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 114, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio1_2x", NULL);
+ clks[audio1_2x] = clk;
+
+ /* audio2_2x */
+ clk = clk_register_fixed_factor(NULL, "audio2_doubler", "audio2",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio2_div", "audio2_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 26, 1,
+ 0, &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio2_2x", "audio2_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 115, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio2_2x", NULL);
+ clks[audio2_2x] = clk;
+
+ /* audio3_2x */
+ clk = clk_register_fixed_factor(NULL, "audio3_doubler", "audio3",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio3_div", "audio3_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 27, 1,
+ 0, &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio3_2x", "audio3_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 116, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio3_2x", NULL);
+ clks[audio3_2x] = clk;
+
+ /* audio4_2x */
+ clk = clk_register_fixed_factor(NULL, "audio4_doubler", "audio4",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio4_div", "audio4_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 28, 1,
+ 0, &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio4_2x", "audio4_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 117, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio4_2x", NULL);
+ clks[audio4_2x] = clk;
+
+ /* spdif_2x */
+ clk = clk_register_fixed_factor(NULL, "spdif_doubler", "spdif",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("spdif_div", "spdif_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 29, 1,
+ 0, &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("spdif_2x", "spdif_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 118,
+ &periph_v_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "spdif_2x", NULL);
+ clks[spdif_2x] = clk;
+}
+
+static void __init tegra114_pmc_clk_init(void __iomem *pmc_base)
+{
+ struct clk *clk;
+
+ /* clk_out_1 */
+ clk = clk_register_mux(NULL, "clk_out_1_mux", clk_out1_parents,
+ ARRAY_SIZE(clk_out1_parents), 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 6, 3, 0,
+ &clk_out_lock);
+ clks[clk_out_1_mux] = clk;
+ clk = clk_register_gate(NULL, "clk_out_1", "clk_out_1_mux", 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 2, 0,
+ &clk_out_lock);
+ clk_register_clkdev(clk, "extern1", "clk_out_1");
+ clks[clk_out_1] = clk;
+
+ /* clk_out_2 */
+ clk = clk_register_mux(NULL, "clk_out_2_mux", clk_out2_parents,
+ ARRAY_SIZE(clk_out1_parents), 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 14, 3, 0,
+ &clk_out_lock);
+ clks[clk_out_2_mux] = clk;
+ clk = clk_register_gate(NULL, "clk_out_2", "clk_out_2_mux", 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 10, 0,
+ &clk_out_lock);
+ clk_register_clkdev(clk, "extern2", "clk_out_2");
+ clks[clk_out_2] = clk;
+
+ /* clk_out_3 */
+ clk = clk_register_mux(NULL, "clk_out_3_mux", clk_out3_parents,
+ ARRAY_SIZE(clk_out1_parents), 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 22, 3, 0,
+ &clk_out_lock);
+ clks[clk_out_3_mux] = clk;
+ clk = clk_register_gate(NULL, "clk_out_3", "clk_out_3_mux", 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 18, 0,
+ &clk_out_lock);
+ clk_register_clkdev(clk, "extern3", "clk_out_3");
+ clks[clk_out_3] = clk;
+
+ /* blink */
+ clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0,
+ pmc_base + PMC_DPD_PADS_ORIDE,
+ PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL);
+ clk = clk_register_gate(NULL, "blink", "blink_override", 0,
+ pmc_base + PMC_CTRL,
+ PMC_CTRL_BLINK_ENB, 0, NULL);
+ clk_register_clkdev(clk, "blink", NULL);
+ clks[blink] = clk;
+
+}
+
+static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
+ "pll_p_out3", "pll_p_out2", "unused",
+ "clk_32k", "pll_m_out1" };
+
+static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
+ "pll_p", "pll_p_out4", "unused",
+ "unused", "pll_x" };
+
+static const char *cclk_lp_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
+ "pll_p", "pll_p_out4", "unused",
+ "unused", "pll_x", "pll_x_out0" };
+
+static void __init tegra114_super_clk_init(void __iomem *clk_base)
+{
+ struct clk *clk;
+
+ /* CCLKG */
+ clk = tegra_clk_register_super_mux("cclk_g", cclk_g_parents,
+ ARRAY_SIZE(cclk_g_parents),
+ CLK_SET_RATE_PARENT,
+ clk_base + CCLKG_BURST_POLICY,
+ 0, 4, 0, 0, NULL);
+ clk_register_clkdev(clk, "cclk_g", NULL);
+ clks[cclk_g] = clk;
+
+ /* CCLKLP */
+ clk = tegra_clk_register_super_mux("cclk_lp", cclk_lp_parents,
+ ARRAY_SIZE(cclk_lp_parents),
+ CLK_SET_RATE_PARENT,
+ clk_base + CCLKLP_BURST_POLICY,
+ 0, 4, 8, 9, NULL);
+ clk_register_clkdev(clk, "cclk_lp", NULL);
+ clks[cclk_lp] = clk;
+
+ /* SCLK */
+ clk = tegra_clk_register_super_mux("sclk", sclk_parents,
+ ARRAY_SIZE(sclk_parents),
+ CLK_SET_RATE_PARENT,
+ clk_base + SCLK_BURST_POLICY,
+ 0, 4, 0, 0, NULL);
+ clk_register_clkdev(clk, "sclk", NULL);
+ clks[sclk] = clk;
+
+ /* HCLK */
+ clk = clk_register_divider(NULL, "hclk_div", "sclk", 0,
+ clk_base + SYSTEM_CLK_RATE, 4, 2, 0,
+ &sysrate_lock);
+ clk = clk_register_gate(NULL, "hclk", "hclk_div", CLK_SET_RATE_PARENT |
+ CLK_IGNORE_UNUSED, clk_base + SYSTEM_CLK_RATE,
+ 7, CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
+ clk_register_clkdev(clk, "hclk", NULL);
+ clks[hclk] = clk;
+
+ /* PCLK */
+ clk = clk_register_divider(NULL, "pclk_div", "hclk", 0,
+ clk_base + SYSTEM_CLK_RATE, 0, 2, 0,
+ &sysrate_lock);
+ clk = clk_register_gate(NULL, "pclk", "pclk_div", CLK_SET_RATE_PARENT |
+ CLK_IGNORE_UNUSED, clk_base + SYSTEM_CLK_RATE,
+ 3, CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
+ clk_register_clkdev(clk, "pclk", NULL);
+ clks[pclk] = clk;
+}
+
+static struct tegra_periph_init_data tegra_periph_clk_list[] = {
+ TEGRA_INIT_DATA_MUX("i2s0", NULL, "tegra30-i2s.0", mux_pllaout0_audio0_2x_pllp_clkm, CLK_SOURCE_I2S0, 30, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s0),
+ TEGRA_INIT_DATA_MUX("i2s1", NULL, "tegra30-i2s.1", mux_pllaout0_audio1_2x_pllp_clkm, CLK_SOURCE_I2S1, 11, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s1),
+ TEGRA_INIT_DATA_MUX("i2s2", NULL, "tegra30-i2s.2", mux_pllaout0_audio2_2x_pllp_clkm, CLK_SOURCE_I2S2, 18, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s2),
+ TEGRA_INIT_DATA_MUX("i2s3", NULL, "tegra30-i2s.3", mux_pllaout0_audio3_2x_pllp_clkm, CLK_SOURCE_I2S3, 101, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s3),
+ TEGRA_INIT_DATA_MUX("i2s4", NULL, "tegra30-i2s.4", mux_pllaout0_audio4_2x_pllp_clkm, CLK_SOURCE_I2S4, 102, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s4),
+ TEGRA_INIT_DATA_MUX("spdif_out", "spdif_out", "tegra30-spdif", mux_pllaout0_audio_2x_pllp_clkm, CLK_SOURCE_SPDIF_OUT, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_out),
+ TEGRA_INIT_DATA_MUX("spdif_in", "spdif_in", "tegra30-spdif", mux_pllp_pllc_pllm, CLK_SOURCE_SPDIF_IN, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_in),
+ TEGRA_INIT_DATA_MUX("pwm", NULL, "pwm", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_PWM, 17, &periph_l_regs, TEGRA_PERIPH_ON_APB, pwm),
+ TEGRA_INIT_DATA_MUX("adx", NULL, "adx", mux_plla_pllc_pllp_clkm, CLK_SOURCE_ADX, 154, &periph_w_regs, TEGRA_PERIPH_ON_APB, adx),
+ TEGRA_INIT_DATA_MUX("amx", NULL, "amx", mux_plla_pllc_pllp_clkm, CLK_SOURCE_AMX, 153, &periph_w_regs, TEGRA_PERIPH_ON_APB, amx),
+ TEGRA_INIT_DATA_MUX("hda", "hda", "tegra30-hda", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_HDA, 125, &periph_v_regs, TEGRA_PERIPH_ON_APB, hda),
+ TEGRA_INIT_DATA_MUX("hda2codec_2x", "hda2codec", "tegra30-hda", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_HDA2CODEC_2X, 111, &periph_v_regs, TEGRA_PERIPH_ON_APB, hda2codec_2x),
+ TEGRA_INIT_DATA_MUX("sbc1", NULL, "tegra11-spi.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC1, 41, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc1),
+ TEGRA_INIT_DATA_MUX("sbc2", NULL, "tegra11-spi.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC2, 44, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc2),
+ TEGRA_INIT_DATA_MUX("sbc3", NULL, "tegra11-spi.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC3, 46, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc3),
+ TEGRA_INIT_DATA_MUX("sbc4", NULL, "tegra11-spi.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC4, 68, &periph_u_regs, TEGRA_PERIPH_ON_APB, sbc4),
+ TEGRA_INIT_DATA_MUX("sbc5", NULL, "tegra11-spi.4", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC5, 104, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc5),
+ TEGRA_INIT_DATA_MUX("sbc6", NULL, "tegra11-spi.5", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC6, 105, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc6),
+ TEGRA_INIT_DATA_MUX8("ndflash", NULL, "tegra_nand", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDFLASH, 13, &periph_u_regs, TEGRA_PERIPH_ON_APB, ndspeed),
+ TEGRA_INIT_DATA_MUX8("ndspeed", NULL, "tegra_nand_speed", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDSPEED, 80, &periph_u_regs, TEGRA_PERIPH_ON_APB, ndspeed),
+ TEGRA_INIT_DATA_MUX("vfir", NULL, "vfir", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_VFIR, 7, &periph_l_regs, TEGRA_PERIPH_ON_APB, vfir),
+ TEGRA_INIT_DATA_MUX("sdmmc1", NULL, "sdhci-tegra.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC1, 14, &periph_l_regs, 0, sdmmc1),
+ TEGRA_INIT_DATA_MUX("sdmmc2", NULL, "sdhci-tegra.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC2, 9, &periph_l_regs, 0, sdmmc2),
+ TEGRA_INIT_DATA_MUX("sdmmc3", NULL, "sdhci-tegra.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC3, 69, &periph_u_regs, 0, sdmmc3),
+ TEGRA_INIT_DATA_MUX("sdmmc4", NULL, "sdhci-tegra.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC4, 15, &periph_l_regs, 0, sdmmc4),
+ TEGRA_INIT_DATA_INT("vde", NULL, "vde", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_VDE, 61, &periph_h_regs, 0, vde),
+ TEGRA_INIT_DATA_MUX_FLAGS("csite", NULL, "csite", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_CSITE, 73, &periph_u_regs, TEGRA_PERIPH_ON_APB, csite, CLK_IGNORE_UNUSED),
+ TEGRA_INIT_DATA_MUX("la", NULL, "la", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_LA, 76, &periph_u_regs, TEGRA_PERIPH_ON_APB, la),
+ TEGRA_INIT_DATA_MUX("trace", NULL, "trace", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_TRACE, 77, &periph_u_regs, TEGRA_PERIPH_ON_APB, trace),
+ TEGRA_INIT_DATA_MUX("owr", NULL, "tegra_w1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_OWR, 71, &periph_u_regs, TEGRA_PERIPH_ON_APB, owr),
+ TEGRA_INIT_DATA_MUX("nor", NULL, "tegra-nor", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_NOR, 42, &periph_h_regs, 0, nor),
+ TEGRA_INIT_DATA_MUX("mipi", NULL, "mipi", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_MIPI, 50, &periph_h_regs, TEGRA_PERIPH_ON_APB, mipi),
+ TEGRA_INIT_DATA_I2C("i2c1", "div-clk", "tegra11-i2c.0", mux_pllp_clkm, CLK_SOURCE_I2C1, 12, &periph_l_regs, i2c1),
+ TEGRA_INIT_DATA_I2C("i2c2", "div-clk", "tegra11-i2c.1", mux_pllp_clkm, CLK_SOURCE_I2C2, 54, &periph_h_regs, i2c2),
+ TEGRA_INIT_DATA_I2C("i2c3", "div-clk", "tegra11-i2c.2", mux_pllp_clkm, CLK_SOURCE_I2C3, 67, &periph_u_regs, i2c3),
+ TEGRA_INIT_DATA_I2C("i2c4", "div-clk", "tegra11-i2c.3", mux_pllp_clkm, CLK_SOURCE_I2C4, 103, &periph_v_regs, i2c4),
+ TEGRA_INIT_DATA_I2C("i2c5", "div-clk", "tegra11-i2c.4", mux_pllp_clkm, CLK_SOURCE_I2C5, 47, &periph_h_regs, i2c5),
+ TEGRA_INIT_DATA_UART("uarta", NULL, "tegra_uart.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTA, 6, &periph_l_regs, uarta),
+ TEGRA_INIT_DATA_UART("uartb", NULL, "tegra_uart.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTB, 7, &periph_l_regs, uartb),
+ TEGRA_INIT_DATA_UART("uartc", NULL, "tegra_uart.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTC, 55, &periph_h_regs, uartc),
+ TEGRA_INIT_DATA_UART("uartd", NULL, "tegra_uart.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTD, 65, &periph_u_regs, uartd),
+ TEGRA_INIT_DATA_INT("3d", NULL, "3d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_3D, 24, &periph_l_regs, 0, gr_3d),
+ TEGRA_INIT_DATA_INT("2d", NULL, "2d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_2D, 21, &periph_l_regs, 0, gr_2d),
+ TEGRA_INIT_DATA_MUX("vi_sensor", "vi_sensor", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR, 20, &periph_l_regs, TEGRA_PERIPH_NO_RESET, vi_sensor),
+ TEGRA_INIT_DATA_INT8("vi", "vi", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI, 20, &periph_l_regs, 0, vi),
+ TEGRA_INIT_DATA_INT8("epp", NULL, "epp", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_EPP, 19, &periph_l_regs, 0, epp),
+ TEGRA_INIT_DATA_INT8("msenc", NULL, "msenc", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_MSENC, 91, &periph_h_regs, TEGRA_PERIPH_WAR_1005168, msenc),
+ TEGRA_INIT_DATA_INT8("tsec", NULL, "tsec", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_TSEC, 83, &periph_u_regs, 0, tsec),
+ TEGRA_INIT_DATA_INT8("host1x", NULL, "host1x", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_HOST1X, 28, &periph_l_regs, 0, host1x),
+ TEGRA_INIT_DATA_MUX8("hdmi", NULL, "hdmi", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_HDMI, 51, &periph_h_regs, 0, hdmi),
+ TEGRA_INIT_DATA_MUX("cilab", "cilab", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILAB, 144, &periph_w_regs, 0, cilab),
+ TEGRA_INIT_DATA_MUX("cilcd", "cilcd", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILCD, 145, &periph_w_regs, 0, cilcd),
+ TEGRA_INIT_DATA_MUX("cile", "cile", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILE, 146, &periph_w_regs, 0, cile),
+ TEGRA_INIT_DATA_MUX("dsialp", "dsialp", "tegradc.0", mux_pllp_pllc_clkm, CLK_SOURCE_DSIALP, 147, &periph_w_regs, 0, dsialp),
+ TEGRA_INIT_DATA_MUX("dsiblp", "dsiblp", "tegradc.1", mux_pllp_pllc_clkm, CLK_SOURCE_DSIBLP, 148, &periph_w_regs, 0, dsiblp),
+ TEGRA_INIT_DATA_MUX("tsensor", NULL, "tegra-tsensor", mux_pllp_pllc_clkm_clk32, CLK_SOURCE_TSENSOR, 100, &periph_v_regs, TEGRA_PERIPH_ON_APB, tsensor),
+ TEGRA_INIT_DATA_MUX("actmon", NULL, "actmon", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_ACTMON, 119, &periph_v_regs, 0, actmon),
+ TEGRA_INIT_DATA_MUX8("extern1", NULL, "extern1", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN1, 120, &periph_v_regs, 0, extern1),
+ TEGRA_INIT_DATA_MUX8("extern2", NULL, "extern2", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN2, 121, &periph_v_regs, 0, extern2),
+ TEGRA_INIT_DATA_MUX8("extern3", NULL, "extern3", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN3, 122, &periph_v_regs, 0, extern3),
+ TEGRA_INIT_DATA_MUX("i2cslow", NULL, "i2cslow", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_I2CSLOW, 81, &periph_u_regs, TEGRA_PERIPH_ON_APB, i2cslow),
+ TEGRA_INIT_DATA_INT8("se", NULL, "se", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SE, 127, &periph_v_regs, TEGRA_PERIPH_ON_APB, se),
+ TEGRA_INIT_DATA_INT_FLAGS("mselect", NULL, "mselect", mux_pllp_clkm, CLK_SOURCE_MSELECT, 99, &periph_v_regs, 0, mselect, CLK_IGNORE_UNUSED),
+ TEGRA_INIT_DATA_MUX8("soc_therm", NULL, "soc_therm", mux_pllm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, &periph_u_regs, TEGRA_PERIPH_ON_APB, soc_therm),
+ TEGRA_INIT_DATA_XUSB("xusb_host_src", "host_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_HOST_SRC, 143, &periph_w_regs, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, xusb_host_src),
+ TEGRA_INIT_DATA_XUSB("xusb_falcon_src", "falcon_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_FALCON_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_falcon_src),
+ TEGRA_INIT_DATA_XUSB("xusb_fs_src", "fs_src", "tegra_xhci", mux_clkm_48M_pllp_480M, CLK_SOURCE_XUSB_FS_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_fs_src),
+ TEGRA_INIT_DATA_XUSB("xusb_ss_src", "ss_src", "tegra_xhci", mux_clkm_pllre_clk32_480M_pllc_ref, CLK_SOURCE_XUSB_SS_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_ss_src),
+ TEGRA_INIT_DATA_XUSB("xusb_dev_src", "dev_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_DEV_SRC, 95, &periph_u_regs, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, xusb_dev_src),
+ TEGRA_INIT_DATA_AUDIO("d_audio", "d_audio", "tegra30-ahub", CLK_SOURCE_D_AUDIO, 106, &periph_v_regs, TEGRA_PERIPH_ON_APB, d_audio),
+ TEGRA_INIT_DATA_AUDIO("dam0", NULL, "tegra30-dam.0", CLK_SOURCE_DAM0, 108, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam0),
+ TEGRA_INIT_DATA_AUDIO("dam1", NULL, "tegra30-dam.1", CLK_SOURCE_DAM1, 109, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam1),
+ TEGRA_INIT_DATA_AUDIO("dam2", NULL, "tegra30-dam.2", CLK_SOURCE_DAM2, 110, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam2),
+};
+
+static struct tegra_periph_init_data tegra_periph_nodiv_clk_list[] = {
+ TEGRA_INIT_DATA_NODIV("disp1", NULL, "tegradc.0", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_DISP1, 29, 7, 27, &periph_l_regs, 0, disp1),
+ TEGRA_INIT_DATA_NODIV("disp2", NULL, "tegradc.1", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_DISP2, 29, 7, 26, &periph_l_regs, 0, disp2),
+};
+
+static __init void tegra114_periph_clk_init(void __iomem *clk_base)
+{
+ struct tegra_periph_init_data *data;
+ struct clk *clk;
+ int i;
+ u32 val;
+
+ /* apbdma */
+ clk = tegra_clk_register_periph_gate("apbdma", "clk_m", 0, clk_base,
+ 0, 34, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[apbdma] = clk;
+
+ /* rtc */
+ clk = tegra_clk_register_periph_gate("rtc", "clk_32k",
+ TEGRA_PERIPH_ON_APB |
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ 0, 4, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "rtc-tegra");
+ clks[rtc] = clk;
+
+ /* kbc */
+ clk = tegra_clk_register_periph_gate("kbc", "clk_32k",
+ TEGRA_PERIPH_ON_APB |
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ 0, 36, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[kbc] = clk;
+
+ /* timer */
+ clk = tegra_clk_register_periph_gate("timer", "clk_m", 0, clk_base,
+ 0, 5, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "timer");
+ clks[timer] = clk;
+
+ /* kfuse */
+ clk = tegra_clk_register_periph_gate("kfuse", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 40,
+ &periph_h_regs, periph_clk_enb_refcnt);
+ clks[kfuse] = clk;
+
+ /* fuse */
+ clk = tegra_clk_register_periph_gate("fuse", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 39,
+ &periph_h_regs, periph_clk_enb_refcnt);
+ clks[fuse] = clk;
+
+ /* fuse_burn */
+ clk = tegra_clk_register_periph_gate("fuse_burn", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 39,
+ &periph_h_regs, periph_clk_enb_refcnt);
+ clks[fuse_burn] = clk;
+
+ /* apbif */
+ clk = tegra_clk_register_periph_gate("apbif", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 107,
+ &periph_v_regs, periph_clk_enb_refcnt);
+ clks[apbif] = clk;
+
+ /* hda2hdmi */
+ clk = tegra_clk_register_periph_gate("hda2hdmi", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 128,
+ &periph_w_regs, periph_clk_enb_refcnt);
+ clks[hda2hdmi] = clk;
+
+ /* vcp */
+ clk = tegra_clk_register_periph_gate("vcp", "clk_m", 0, clk_base, 0,
+ 29, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clks[vcp] = clk;
+
+ /* bsea */
+ clk = tegra_clk_register_periph_gate("bsea", "clk_m", 0, clk_base,
+ 0, 62, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[bsea] = clk;
+
+ /* bsev */
+ clk = tegra_clk_register_periph_gate("bsev", "clk_m", 0, clk_base,
+ 0, 63, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[bsev] = clk;
+
+ /* mipi-cal */
+ clk = tegra_clk_register_periph_gate("mipi-cal", "clk_m", 0, clk_base,
+ 0, 56, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[mipi_cal] = clk;
+
+ /* usbd */
+ clk = tegra_clk_register_periph_gate("usbd", "clk_m", 0, clk_base,
+ 0, 22, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clks[usbd] = clk;
+
+ /* usb2 */
+ clk = tegra_clk_register_periph_gate("usb2", "clk_m", 0, clk_base,
+ 0, 58, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[usb2] = clk;
+
+ /* usb3 */
+ clk = tegra_clk_register_periph_gate("usb3", "clk_m", 0, clk_base,
+ 0, 59, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[usb3] = clk;
+
+ /* csi */
+ clk = tegra_clk_register_periph_gate("csi", "pll_p_out3", 0, clk_base,
+ 0, 52, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[csi] = clk;
+
+ /* isp */
+ clk = tegra_clk_register_periph_gate("isp", "clk_m", 0, clk_base, 0,
+ 23, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clks[isp] = clk;
+
+ /* csus */
+ clk = tegra_clk_register_periph_gate("csus", "clk_m",
+ TEGRA_PERIPH_NO_RESET, clk_base, 0, 92,
+ &periph_u_regs, periph_clk_enb_refcnt);
+ clks[csus] = clk;
+
+ /* dds */
+ clk = tegra_clk_register_periph_gate("dds", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 150,
+ &periph_w_regs, periph_clk_enb_refcnt);
+ clks[dds] = clk;
+
+ /* dp2 */
+ clk = tegra_clk_register_periph_gate("dp2", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 152,
+ &periph_w_regs, periph_clk_enb_refcnt);
+ clks[dp2] = clk;
+
+ /* dtv */
+ clk = tegra_clk_register_periph_gate("dtv", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 79,
+ &periph_u_regs, periph_clk_enb_refcnt);
+ clks[dtv] = clk;
+
+ /* dsia */
+ clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0,
+ ARRAY_SIZE(mux_plld_out0_plld2_out0), 0,
+ clk_base + PLLD_BASE, 25, 1, 0, &pll_d_lock);
+ clks[dsia_mux] = clk;
+ clk = tegra_clk_register_periph_gate("dsia", "dsia_mux", 0, clk_base,
+ 0, 48, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[dsia] = clk;
+
+ /* dsib */
+ clk = clk_register_mux(NULL, "dsib_mux", mux_plld_out0_plld2_out0,
+ ARRAY_SIZE(mux_plld_out0_plld2_out0), 0,
+ clk_base + PLLD2_BASE, 25, 1, 0, &pll_d2_lock);
+ clks[dsib_mux] = clk;
+ clk = tegra_clk_register_periph_gate("dsib", "dsib_mux", 0, clk_base,
+ 0, 82, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clks[dsib] = clk;
+
+ /* xusb_hs_src */
+ val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC);
+ val |= BIT(25); /* always select PLLU_60M */
+ writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC);
+
+ clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0,
+ 1, 1);
+ clks[xusb_hs_src] = clk;
+
+ /* xusb_host */
+ clk = tegra_clk_register_periph_gate("xusb_host", "xusb_host_src", 0,
+ clk_base, 0, 89, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clks[xusb_host] = clk;
+
+ /* xusb_ss */
+ clk = tegra_clk_register_periph_gate("xusb_ss", "xusb_ss_src", 0,
+ clk_base, 0, 156, &periph_w_regs,
+ periph_clk_enb_refcnt);
+ clks[xusb_host] = clk;
+
+ /* xusb_dev */
+ clk = tegra_clk_register_periph_gate("xusb_dev", "xusb_dev_src", 0,
+ clk_base, 0, 95, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clks[xusb_dev] = clk;
+
+ /* emc */
+ clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
+ ARRAY_SIZE(mux_pllmcp_clkm), 0,
+ clk_base + CLK_SOURCE_EMC,
+ 29, 3, 0, NULL);
+ clk = tegra_clk_register_periph_gate("emc", "emc_mux", 0, clk_base,
+ CLK_IGNORE_UNUSED, 57, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[emc] = clk;
+
+ for (i = 0; i < ARRAY_SIZE(tegra_periph_clk_list); i++) {
+ data = &tegra_periph_clk_list[i];
+ clk = tegra_clk_register_periph(data->name, data->parent_names,
+ data->num_parents, &data->periph,
+ clk_base, data->offset, data->flags);
+ clks[data->clk_id] = clk;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(tegra_periph_nodiv_clk_list); i++) {
+ data = &tegra_periph_nodiv_clk_list[i];
+ clk = tegra_clk_register_periph_nodiv(data->name,
+ data->parent_names, data->num_parents,
+ &data->periph, clk_base, data->offset);
+ clks[data->clk_id] = clk;
+ }
+}
+
+static struct tegra_cpu_car_ops tegra114_cpu_car_ops;
+
+static const struct of_device_id pmc_match[] __initconst = {
+ { .compatible = "nvidia,tegra114-pmc" },
+ {},
+};
+
+static __initdata struct tegra_clk_init_table init_table[] = {
+ {uarta, pll_p, 408000000, 0},
+ {uartb, pll_p, 408000000, 0},
+ {uartc, pll_p, 408000000, 0},
+ {uartd, pll_p, 408000000, 0},
+ {pll_a, clk_max, 564480000, 1},
+ {pll_a_out0, clk_max, 11289600, 1},
+ {extern1, pll_a_out0, 0, 1},
+ {clk_out_1_mux, extern1, 0, 1},
+ {clk_out_1, clk_max, 0, 1},
+ {i2s0, pll_a_out0, 11289600, 0},
+ {i2s1, pll_a_out0, 11289600, 0},
+ {i2s2, pll_a_out0, 11289600, 0},
+ {i2s3, pll_a_out0, 11289600, 0},
+ {i2s4, pll_a_out0, 11289600, 0},
+ {clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */
+};
+
+static void __init tegra114_clock_apply_init_table(void)
+{
+ tegra_init_from_table(init_table, clks, clk_max);
+}
+
+void __init tegra114_clock_init(struct device_node *np)
+{
+ struct device_node *node;
+ int i;
+
+ clk_base = of_iomap(np, 0);
+ if (!clk_base) {
+ pr_err("ioremap tegra114 CAR failed\n");
+ return;
+ }
+
+ node = of_find_matching_node(NULL, pmc_match);
+ if (!node) {
+ pr_err("Failed to find pmc node\n");
+ WARN_ON(1);
+ return;
+ }
+
+ pmc_base = of_iomap(node, 0);
+ if (!pmc_base) {
+ pr_err("Can't map pmc registers\n");
+ WARN_ON(1);
+ return;
+ }
+
+ if (tegra114_osc_clk_init(clk_base) < 0)
+ return;
+
+ tegra114_fixed_clk_init(clk_base);
+ tegra114_pll_init(clk_base, pmc_base);
+ tegra114_periph_clk_init(clk_base);
+ tegra114_audio_clk_init(clk_base);
+ tegra114_pmc_clk_init(pmc_base);
+ tegra114_super_clk_init(clk_base);
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++) {
+ if (IS_ERR(clks[i])) {
+ pr_err
+ ("Tegra114 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+ }
+ if (!clks[i])
+ clks[i] = ERR_PTR(-EINVAL);
+ }
+
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ tegra_clk_apply_init_table = tegra114_clock_apply_init_table;
+
+ tegra_cpu_car_ops = &tegra114_cpu_car_ops;
+}
#define PLLE_BASE 0xe8
#define PLLE_MISC 0xec
-#define PLL_BASE_LOCK 27
-#define PLLE_MISC_LOCK 11
+#define PLL_BASE_LOCK BIT(27)
+#define PLLE_MISC_LOCK BIT(11)
#define PLL_MISC_LOCK_ENABLE 18
#define PLLDU_MISC_LOCK_ENABLE 22
dvc, dsi, mipi = 50, hdmi, csi, tvdac, i2c2, uartc, emc = 57, usb2,
usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3,
pex, owr, afi, csite, pcie_xclk, avpucq = 75, la, irama = 84, iramb,
- iramc, iramd, cram2, audio_2x, clk_d, csus = 92, cdev1, cdev2,
+ iramc, iramd, cram2, audio_2x, clk_d, csus = 92, cdev2, cdev1,
uartb = 96, vfir, spdif_in, spdif_out, vi, vi_sensor, tvo, cve,
osc, clk_32k, clk_m, sclk, cclk, hclk, pclk, blink, pll_a, pll_a_out0,
pll_c, pll_c_out1, pll_d, pll_d_out0, pll_e, pll_m, pll_m_out1,
static struct clk_onecell_data clk_data;
static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
- { 12000000, 600000000, 600, 12, 1, 8 },
- { 13000000, 600000000, 600, 13, 1, 8 },
- { 19200000, 600000000, 500, 16, 1, 6 },
- { 26000000, 600000000, 600, 26, 1, 8 },
+ { 12000000, 600000000, 600, 12, 0, 8 },
+ { 13000000, 600000000, 600, 13, 0, 8 },
+ { 19200000, 600000000, 500, 16, 0, 6 },
+ { 26000000, 600000000, 600, 26, 0, 8 },
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_m_freq_table[] = {
- { 12000000, 666000000, 666, 12, 1, 8},
- { 13000000, 666000000, 666, 13, 1, 8},
- { 19200000, 666000000, 555, 16, 1, 8},
- { 26000000, 666000000, 666, 26, 1, 8},
- { 12000000, 600000000, 600, 12, 1, 8},
- { 13000000, 600000000, 600, 13, 1, 8},
- { 19200000, 600000000, 375, 12, 1, 6},
- { 26000000, 600000000, 600, 26, 1, 8},
+ { 12000000, 666000000, 666, 12, 0, 8},
+ { 13000000, 666000000, 666, 13, 0, 8},
+ { 19200000, 666000000, 555, 16, 0, 8},
+ { 26000000, 666000000, 666, 26, 0, 8},
+ { 12000000, 600000000, 600, 12, 0, 8},
+ { 13000000, 600000000, 600, 13, 0, 8},
+ { 19200000, 600000000, 375, 12, 0, 6},
+ { 26000000, 600000000, 600, 26, 0, 8},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_p_freq_table[] = {
- { 12000000, 216000000, 432, 12, 2, 8},
- { 13000000, 216000000, 432, 13, 2, 8},
- { 19200000, 216000000, 90, 4, 2, 1},
- { 26000000, 216000000, 432, 26, 2, 8},
- { 12000000, 432000000, 432, 12, 1, 8},
- { 13000000, 432000000, 432, 13, 1, 8},
- { 19200000, 432000000, 90, 4, 1, 1},
- { 26000000, 432000000, 432, 26, 1, 8},
+ { 12000000, 216000000, 432, 12, 1, 8},
+ { 13000000, 216000000, 432, 13, 1, 8},
+ { 19200000, 216000000, 90, 4, 1, 1},
+ { 26000000, 216000000, 432, 26, 1, 8},
+ { 12000000, 432000000, 432, 12, 0, 8},
+ { 13000000, 432000000, 432, 13, 0, 8},
+ { 19200000, 432000000, 90, 4, 0, 1},
+ { 26000000, 432000000, 432, 26, 0, 8},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_a_freq_table[] = {
- { 28800000, 56448000, 49, 25, 1, 1},
- { 28800000, 73728000, 64, 25, 1, 1},
- { 28800000, 24000000, 5, 6, 1, 1},
+ { 28800000, 56448000, 49, 25, 0, 1},
+ { 28800000, 73728000, 64, 25, 0, 1},
+ { 28800000, 24000000, 5, 6, 0, 1},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
- { 12000000, 216000000, 216, 12, 1, 4},
- { 13000000, 216000000, 216, 13, 1, 4},
- { 19200000, 216000000, 135, 12, 1, 3},
- { 26000000, 216000000, 216, 26, 1, 4},
+ { 12000000, 216000000, 216, 12, 0, 4},
+ { 13000000, 216000000, 216, 13, 0, 4},
+ { 19200000, 216000000, 135, 12, 0, 3},
+ { 26000000, 216000000, 216, 26, 0, 4},
- { 12000000, 594000000, 594, 12, 1, 8},
- { 13000000, 594000000, 594, 13, 1, 8},
- { 19200000, 594000000, 495, 16, 1, 8},
- { 26000000, 594000000, 594, 26, 1, 8},
+ { 12000000, 594000000, 594, 12, 0, 8},
+ { 13000000, 594000000, 594, 13, 0, 8},
+ { 19200000, 594000000, 495, 16, 0, 8},
+ { 26000000, 594000000, 594, 26, 0, 8},
- { 12000000, 1000000000, 1000, 12, 1, 12},
- { 13000000, 1000000000, 1000, 13, 1, 12},
- { 19200000, 1000000000, 625, 12, 1, 8},
- { 26000000, 1000000000, 1000, 26, 1, 12},
+ { 12000000, 1000000000, 1000, 12, 0, 12},
+ { 13000000, 1000000000, 1000, 13, 0, 12},
+ { 19200000, 1000000000, 625, 12, 0, 8},
+ { 26000000, 1000000000, 1000, 26, 0, 12},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
- { 12000000, 480000000, 960, 12, 2, 0},
- { 13000000, 480000000, 960, 13, 2, 0},
- { 19200000, 480000000, 200, 4, 2, 0},
- { 26000000, 480000000, 960, 26, 2, 0},
+ { 12000000, 480000000, 960, 12, 0, 0},
+ { 13000000, 480000000, 960, 13, 0, 0},
+ { 19200000, 480000000, 200, 4, 0, 0},
+ { 26000000, 480000000, 960, 26, 0, 0},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
/* 1 GHz */
- { 12000000, 1000000000, 1000, 12, 1, 12},
- { 13000000, 1000000000, 1000, 13, 1, 12},
- { 19200000, 1000000000, 625, 12, 1, 8},
- { 26000000, 1000000000, 1000, 26, 1, 12},
+ { 12000000, 1000000000, 1000, 12, 0, 12},
+ { 13000000, 1000000000, 1000, 13, 0, 12},
+ { 19200000, 1000000000, 625, 12, 0, 8},
+ { 26000000, 1000000000, 1000, 26, 0, 12},
/* 912 MHz */
- { 12000000, 912000000, 912, 12, 1, 12},
- { 13000000, 912000000, 912, 13, 1, 12},
- { 19200000, 912000000, 760, 16, 1, 8},
- { 26000000, 912000000, 912, 26, 1, 12},
+ { 12000000, 912000000, 912, 12, 0, 12},
+ { 13000000, 912000000, 912, 13, 0, 12},
+ { 19200000, 912000000, 760, 16, 0, 8},
+ { 26000000, 912000000, 912, 26, 0, 12},
/* 816 MHz */
- { 12000000, 816000000, 816, 12, 1, 12},
- { 13000000, 816000000, 816, 13, 1, 12},
- { 19200000, 816000000, 680, 16, 1, 8},
- { 26000000, 816000000, 816, 26, 1, 12},
+ { 12000000, 816000000, 816, 12, 0, 12},
+ { 13000000, 816000000, 816, 13, 0, 12},
+ { 19200000, 816000000, 680, 16, 0, 8},
+ { 26000000, 816000000, 816, 26, 0, 12},
/* 760 MHz */
- { 12000000, 760000000, 760, 12, 1, 12},
- { 13000000, 760000000, 760, 13, 1, 12},
- { 19200000, 760000000, 950, 24, 1, 8},
- { 26000000, 760000000, 760, 26, 1, 12},
+ { 12000000, 760000000, 760, 12, 0, 12},
+ { 13000000, 760000000, 760, 13, 0, 12},
+ { 19200000, 760000000, 950, 24, 0, 8},
+ { 26000000, 760000000, 760, 26, 0, 12},
/* 750 MHz */
- { 12000000, 750000000, 750, 12, 1, 12},
- { 13000000, 750000000, 750, 13, 1, 12},
- { 19200000, 750000000, 625, 16, 1, 8},
- { 26000000, 750000000, 750, 26, 1, 12},
+ { 12000000, 750000000, 750, 12, 0, 12},
+ { 13000000, 750000000, 750, 13, 0, 12},
+ { 19200000, 750000000, 625, 16, 0, 8},
+ { 26000000, 750000000, 750, 26, 0, 12},
/* 608 MHz */
- { 12000000, 608000000, 608, 12, 1, 12},
- { 13000000, 608000000, 608, 13, 1, 12},
- { 19200000, 608000000, 380, 12, 1, 8},
- { 26000000, 608000000, 608, 26, 1, 12},
+ { 12000000, 608000000, 608, 12, 0, 12},
+ { 13000000, 608000000, 608, 13, 0, 12},
+ { 19200000, 608000000, 380, 12, 0, 8},
+ { 26000000, 608000000, 608, 26, 0, 12},
/* 456 MHz */
- { 12000000, 456000000, 456, 12, 1, 12},
- { 13000000, 456000000, 456, 13, 1, 12},
- { 19200000, 456000000, 380, 16, 1, 8},
- { 26000000, 456000000, 456, 26, 1, 12},
+ { 12000000, 456000000, 456, 12, 0, 12},
+ { 13000000, 456000000, 456, 13, 0, 12},
+ { 19200000, 456000000, 380, 16, 0, 8},
+ { 26000000, 456000000, 456, 26, 0, 12},
/* 312 MHz */
- { 12000000, 312000000, 312, 12, 1, 12},
- { 13000000, 312000000, 312, 13, 1, 12},
- { 19200000, 312000000, 260, 16, 1, 8},
- { 26000000, 312000000, 312, 26, 1, 12},
+ { 12000000, 312000000, 312, 12, 0, 12},
+ { 13000000, 312000000, 312, 13, 0, 12},
+ { 19200000, 312000000, 260, 16, 0, 8},
+ { 26000000, 312000000, 312, 26, 0, 12},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_e_freq_table[] = {
- { 12000000, 100000000, 200, 24, 1, 0 },
+ { 12000000, 100000000, 200, 24, 0, 0 },
{ 0, 0, 0, 0, 0, 0 },
};
.vco_max = 1400000000,
.base_reg = PLLC_BASE,
.misc_reg = PLLC_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1200000000,
.base_reg = PLLM_BASE,
.misc_reg = PLLM_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1400000000,
.base_reg = PLLP_BASE,
.misc_reg = PLLP_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1400000000,
.base_reg = PLLA_BASE,
.misc_reg = PLLA_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1000000000,
.base_reg = PLLD_BASE,
.misc_reg = PLLD_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
};
+static struct pdiv_map pllu_p[] = {
+ { .pdiv = 1, .hw_val = 1 },
+ { .pdiv = 2, .hw_val = 0 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
static struct tegra_clk_pll_params pll_u_params = {
.input_min = 2000000,
.input_max = 40000000,
.vco_max = 960000000,
.base_reg = PLLU_BASE,
.misc_reg = PLLU_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
+ .pdiv_tohw = pllu_p,
};
static struct tegra_clk_pll_params pll_x_params = {
.vco_max = 1200000000,
.base_reg = PLLX_BASE,
.misc_reg = PLLX_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 0,
.base_reg = PLLE_BASE,
.misc_reg = PLLE_MISC,
- .lock_bit_idx = PLLE_MISC_LOCK,
+ .lock_mask = PLLE_MISC_LOCK,
.lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
.lock_delay = 0,
};
clks[pll_a_out0] = clk;
/* PLLE */
- clk = tegra_clk_register_plle("pll_e", "pll_ref", clk_base, NULL,
+ clk = tegra_clk_register_plle("pll_e", "pll_ref", clk_base, pmc_base,
0, 100000000, &pll_e_params,
0, pll_e_freq_table, NULL);
clk_register_clkdev(clk, "pll_e", NULL);
}
static const char *cclk_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
- "pll_p_cclk", "pll_p_out4_cclk",
- "pll_p_out3_cclk", "clk_d", "pll_x" };
+ "pll_p", "pll_p_out4",
+ "pll_p_out3", "clk_d", "pll_x" };
static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
"pll_p_out3", "pll_p_out2", "clk_d",
"clk_32k", "pll_m_out1" };
{
struct clk *clk;
- /*
- * DIV_U71 dividers for CCLK, these dividers are used only
- * if parent clock is fixed rate.
- */
-
- /*
- * Clock input to cclk divided from pll_p using
- * U71 divider of cclk.
- */
- clk = tegra_clk_register_divider("pll_p_cclk", "pll_p",
- clk_base + SUPER_CCLK_DIVIDER, 0,
- TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
- clk_register_clkdev(clk, "pll_p_cclk", NULL);
-
- /*
- * Clock input to cclk divided from pll_p_out3 using
- * U71 divider of cclk.
- */
- clk = tegra_clk_register_divider("pll_p_out3_cclk", "pll_p_out3",
- clk_base + SUPER_CCLK_DIVIDER, 0,
- TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
- clk_register_clkdev(clk, "pll_p_out3_cclk", NULL);
-
- /*
- * Clock input to cclk divided from pll_p_out4 using
- * U71 divider of cclk.
- */
- clk = tegra_clk_register_divider("pll_p_out4_cclk", "pll_p_out4",
- clk_base + SUPER_CCLK_DIVIDER, 0,
- TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
- clk_register_clkdev(clk, "pll_p_out4_cclk", NULL);
-
/* CCLK */
clk = tegra_clk_register_super_mux("cclk", cclk_parents,
ARRAY_SIZE(cclk_parents), CLK_SET_RATE_PARENT,
data = &tegra_periph_clk_list[i];
clk = tegra_clk_register_periph(data->name, data->parent_names,
data->num_parents, &data->periph,
- clk_base, data->offset);
+ clk_base, data->offset, data->flags);
clk_register_clkdev(clk, data->con_id, data->dev_id);
clks[data->clk_id] = clk;
}
{host1x, pll_c, 150000000, 0},
{disp1, pll_p, 600000000, 0},
{disp2, pll_p, 600000000, 0},
+ {gr2d, pll_c, 300000000, 0},
+ {gr3d, pll_c, 300000000, 0},
{clk_max, clk_max, 0, 0}, /* This MUST be the last entry */
};
+static void __init tegra20_clock_apply_init_table(void)
+{
+ tegra_init_from_table(init_table, clks, clk_max);
+}
+
/*
* Some clocks may be used by different drivers depending on the board
* configuration. List those here to register them twice in the clock lookup
TEGRA_CLK_DUPLICATE(usbd, "tegra-ehci.0", NULL),
TEGRA_CLK_DUPLICATE(usbd, "tegra-otg", NULL),
TEGRA_CLK_DUPLICATE(cclk, NULL, "cpu"),
- TEGRA_CLK_DUPLICATE(twd, "smp_twd", NULL),
TEGRA_CLK_DUPLICATE(clk_max, NULL, NULL), /* Must be the last entry */
};
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- tegra_init_from_table(init_table, clks, clk_max);
+ tegra_clk_apply_init_table = tegra20_clock_apply_init_table;
tegra_cpu_car_ops = &tegra20_cpu_car_ops;
}
#define PLLDU_MISC_LOCK_ENABLE 22
#define PLLE_MISC_LOCK_ENABLE 9
-#define PLL_BASE_LOCK 27
-#define PLLE_MISC_LOCK 11
+#define PLL_BASE_LOCK BIT(27)
+#define PLLE_MISC_LOCK BIT(11)
#define PLLE_AUX 0x48c
#define PLLC_OUT 0x84
usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3,
pcie, owr, afi, csite, pciex, avpucq, la, dtv = 79, ndspeed, i2cslow,
dsib, irama = 84, iramb, iramc, iramd, cram2, audio_2x = 90, csus = 92,
- cdev1, cdev2, cpu_g = 96, cpu_lp, gr3d2, mselect, tsensor, i2s3, i2s4,
+ cdev2, cdev1, cpu_g = 96, cpu_lp, gr3d2, mselect, tsensor, i2s3, i2s4,
i2c4, sbc5, sbc6, d_audio, apbif, dam0, dam1, dam2, hda2codec_2x,
atomics, audio0_2x, audio1_2x, audio2_2x, audio3_2x, audio4_2x,
spdif_2x, actmon, extern1, extern2, extern3, sata_oob, sata, hda,
};
static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
- { 12000000, 1040000000, 520, 6, 1, 8},
- { 13000000, 1040000000, 480, 6, 1, 8},
- { 16800000, 1040000000, 495, 8, 1, 8}, /* actual: 1039.5 MHz */
- { 19200000, 1040000000, 325, 6, 1, 6},
- { 26000000, 1040000000, 520, 13, 1, 8},
-
- { 12000000, 832000000, 416, 6, 1, 8},
- { 13000000, 832000000, 832, 13, 1, 8},
- { 16800000, 832000000, 396, 8, 1, 8}, /* actual: 831.6 MHz */
- { 19200000, 832000000, 260, 6, 1, 8},
- { 26000000, 832000000, 416, 13, 1, 8},
-
- { 12000000, 624000000, 624, 12, 1, 8},
- { 13000000, 624000000, 624, 13, 1, 8},
- { 16800000, 600000000, 520, 14, 1, 8},
- { 19200000, 624000000, 520, 16, 1, 8},
- { 26000000, 624000000, 624, 26, 1, 8},
-
- { 12000000, 600000000, 600, 12, 1, 8},
- { 13000000, 600000000, 600, 13, 1, 8},
- { 16800000, 600000000, 500, 14, 1, 8},
- { 19200000, 600000000, 375, 12, 1, 6},
- { 26000000, 600000000, 600, 26, 1, 8},
-
- { 12000000, 520000000, 520, 12, 1, 8},
- { 13000000, 520000000, 520, 13, 1, 8},
- { 16800000, 520000000, 495, 16, 1, 8}, /* actual: 519.75 MHz */
- { 19200000, 520000000, 325, 12, 1, 6},
- { 26000000, 520000000, 520, 26, 1, 8},
-
- { 12000000, 416000000, 416, 12, 1, 8},
- { 13000000, 416000000, 416, 13, 1, 8},
- { 16800000, 416000000, 396, 16, 1, 8}, /* actual: 415.8 MHz */
- { 19200000, 416000000, 260, 12, 1, 6},
- { 26000000, 416000000, 416, 26, 1, 8},
+ { 12000000, 1040000000, 520, 6, 0, 8},
+ { 13000000, 1040000000, 480, 6, 0, 8},
+ { 16800000, 1040000000, 495, 8, 0, 8}, /* actual: 1039.5 MHz */
+ { 19200000, 1040000000, 325, 6, 0, 6},
+ { 26000000, 1040000000, 520, 13, 0, 8},
+
+ { 12000000, 832000000, 416, 6, 0, 8},
+ { 13000000, 832000000, 832, 13, 0, 8},
+ { 16800000, 832000000, 396, 8, 0, 8}, /* actual: 831.6 MHz */
+ { 19200000, 832000000, 260, 6, 0, 8},
+ { 26000000, 832000000, 416, 13, 0, 8},
+
+ { 12000000, 624000000, 624, 12, 0, 8},
+ { 13000000, 624000000, 624, 13, 0, 8},
+ { 16800000, 600000000, 520, 14, 0, 8},
+ { 19200000, 624000000, 520, 16, 0, 8},
+ { 26000000, 624000000, 624, 26, 0, 8},
+
+ { 12000000, 600000000, 600, 12, 0, 8},
+ { 13000000, 600000000, 600, 13, 0, 8},
+ { 16800000, 600000000, 500, 14, 0, 8},
+ { 19200000, 600000000, 375, 12, 0, 6},
+ { 26000000, 600000000, 600, 26, 0, 8},
+
+ { 12000000, 520000000, 520, 12, 0, 8},
+ { 13000000, 520000000, 520, 13, 0, 8},
+ { 16800000, 520000000, 495, 16, 0, 8}, /* actual: 519.75 MHz */
+ { 19200000, 520000000, 325, 12, 0, 6},
+ { 26000000, 520000000, 520, 26, 0, 8},
+
+ { 12000000, 416000000, 416, 12, 0, 8},
+ { 13000000, 416000000, 416, 13, 0, 8},
+ { 16800000, 416000000, 396, 16, 0, 8}, /* actual: 415.8 MHz */
+ { 19200000, 416000000, 260, 12, 0, 6},
+ { 26000000, 416000000, 416, 26, 0, 8},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_m_freq_table[] = {
- { 12000000, 666000000, 666, 12, 1, 8},
- { 13000000, 666000000, 666, 13, 1, 8},
- { 16800000, 666000000, 555, 14, 1, 8},
- { 19200000, 666000000, 555, 16, 1, 8},
- { 26000000, 666000000, 666, 26, 1, 8},
- { 12000000, 600000000, 600, 12, 1, 8},
- { 13000000, 600000000, 600, 13, 1, 8},
- { 16800000, 600000000, 500, 14, 1, 8},
- { 19200000, 600000000, 375, 12, 1, 6},
- { 26000000, 600000000, 600, 26, 1, 8},
+ { 12000000, 666000000, 666, 12, 0, 8},
+ { 13000000, 666000000, 666, 13, 0, 8},
+ { 16800000, 666000000, 555, 14, 0, 8},
+ { 19200000, 666000000, 555, 16, 0, 8},
+ { 26000000, 666000000, 666, 26, 0, 8},
+ { 12000000, 600000000, 600, 12, 0, 8},
+ { 13000000, 600000000, 600, 13, 0, 8},
+ { 16800000, 600000000, 500, 14, 0, 8},
+ { 19200000, 600000000, 375, 12, 0, 6},
+ { 26000000, 600000000, 600, 26, 0, 8},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_p_freq_table[] = {
- { 12000000, 216000000, 432, 12, 2, 8},
- { 13000000, 216000000, 432, 13, 2, 8},
- { 16800000, 216000000, 360, 14, 2, 8},
- { 19200000, 216000000, 360, 16, 2, 8},
- { 26000000, 216000000, 432, 26, 2, 8},
+ { 12000000, 216000000, 432, 12, 1, 8},
+ { 13000000, 216000000, 432, 13, 1, 8},
+ { 16800000, 216000000, 360, 14, 1, 8},
+ { 19200000, 216000000, 360, 16, 1, 8},
+ { 26000000, 216000000, 432, 26, 1, 8},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_a_freq_table[] = {
- { 9600000, 564480000, 294, 5, 1, 4},
- { 9600000, 552960000, 288, 5, 1, 4},
- { 9600000, 24000000, 5, 2, 1, 1},
+ { 9600000, 564480000, 294, 5, 0, 4},
+ { 9600000, 552960000, 288, 5, 0, 4},
+ { 9600000, 24000000, 5, 2, 0, 1},
- { 28800000, 56448000, 49, 25, 1, 1},
- { 28800000, 73728000, 64, 25, 1, 1},
- { 28800000, 24000000, 5, 6, 1, 1},
+ { 28800000, 56448000, 49, 25, 0, 1},
+ { 28800000, 73728000, 64, 25, 0, 1},
+ { 28800000, 24000000, 5, 6, 0, 1},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
- { 12000000, 216000000, 216, 12, 1, 4},
- { 13000000, 216000000, 216, 13, 1, 4},
- { 16800000, 216000000, 180, 14, 1, 4},
- { 19200000, 216000000, 180, 16, 1, 4},
- { 26000000, 216000000, 216, 26, 1, 4},
-
- { 12000000, 594000000, 594, 12, 1, 8},
- { 13000000, 594000000, 594, 13, 1, 8},
- { 16800000, 594000000, 495, 14, 1, 8},
- { 19200000, 594000000, 495, 16, 1, 8},
- { 26000000, 594000000, 594, 26, 1, 8},
-
- { 12000000, 1000000000, 1000, 12, 1, 12},
- { 13000000, 1000000000, 1000, 13, 1, 12},
- { 19200000, 1000000000, 625, 12, 1, 8},
- { 26000000, 1000000000, 1000, 26, 1, 12},
+ { 12000000, 216000000, 216, 12, 0, 4},
+ { 13000000, 216000000, 216, 13, 0, 4},
+ { 16800000, 216000000, 180, 14, 0, 4},
+ { 19200000, 216000000, 180, 16, 0, 4},
+ { 26000000, 216000000, 216, 26, 0, 4},
+
+ { 12000000, 594000000, 594, 12, 0, 8},
+ { 13000000, 594000000, 594, 13, 0, 8},
+ { 16800000, 594000000, 495, 14, 0, 8},
+ { 19200000, 594000000, 495, 16, 0, 8},
+ { 26000000, 594000000, 594, 26, 0, 8},
+
+ { 12000000, 1000000000, 1000, 12, 0, 12},
+ { 13000000, 1000000000, 1000, 13, 0, 12},
+ { 19200000, 1000000000, 625, 12, 0, 8},
+ { 26000000, 1000000000, 1000, 26, 0, 12},
{ 0, 0, 0, 0, 0, 0 },
};
+static struct pdiv_map pllu_p[] = {
+ { .pdiv = 1, .hw_val = 1 },
+ { .pdiv = 2, .hw_val = 0 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
- { 12000000, 480000000, 960, 12, 2, 12},
- { 13000000, 480000000, 960, 13, 2, 12},
- { 16800000, 480000000, 400, 7, 2, 5},
- { 19200000, 480000000, 200, 4, 2, 3},
- { 26000000, 480000000, 960, 26, 2, 12},
+ { 12000000, 480000000, 960, 12, 0, 12},
+ { 13000000, 480000000, 960, 13, 0, 12},
+ { 16800000, 480000000, 400, 7, 0, 5},
+ { 19200000, 480000000, 200, 4, 0, 3},
+ { 26000000, 480000000, 960, 26, 0, 12},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
/* 1.7 GHz */
- { 12000000, 1700000000, 850, 6, 1, 8},
- { 13000000, 1700000000, 915, 7, 1, 8}, /* actual: 1699.2 MHz */
- { 16800000, 1700000000, 708, 7, 1, 8}, /* actual: 1699.2 MHz */
- { 19200000, 1700000000, 885, 10, 1, 8}, /* actual: 1699.2 MHz */
- { 26000000, 1700000000, 850, 13, 1, 8},
+ { 12000000, 1700000000, 850, 6, 0, 8},
+ { 13000000, 1700000000, 915, 7, 0, 8}, /* actual: 1699.2 MHz */
+ { 16800000, 1700000000, 708, 7, 0, 8}, /* actual: 1699.2 MHz */
+ { 19200000, 1700000000, 885, 10, 0, 8}, /* actual: 1699.2 MHz */
+ { 26000000, 1700000000, 850, 13, 0, 8},
/* 1.6 GHz */
- { 12000000, 1600000000, 800, 6, 1, 8},
- { 13000000, 1600000000, 738, 6, 1, 8}, /* actual: 1599.0 MHz */
- { 16800000, 1600000000, 857, 9, 1, 8}, /* actual: 1599.7 MHz */
- { 19200000, 1600000000, 500, 6, 1, 8},
- { 26000000, 1600000000, 800, 13, 1, 8},
+ { 12000000, 1600000000, 800, 6, 0, 8},
+ { 13000000, 1600000000, 738, 6, 0, 8}, /* actual: 1599.0 MHz */
+ { 16800000, 1600000000, 857, 9, 0, 8}, /* actual: 1599.7 MHz */
+ { 19200000, 1600000000, 500, 6, 0, 8},
+ { 26000000, 1600000000, 800, 13, 0, 8},
/* 1.5 GHz */
- { 12000000, 1500000000, 750, 6, 1, 8},
- { 13000000, 1500000000, 923, 8, 1, 8}, /* actual: 1499.8 MHz */
- { 16800000, 1500000000, 625, 7, 1, 8},
- { 19200000, 1500000000, 625, 8, 1, 8},
- { 26000000, 1500000000, 750, 13, 1, 8},
+ { 12000000, 1500000000, 750, 6, 0, 8},
+ { 13000000, 1500000000, 923, 8, 0, 8}, /* actual: 1499.8 MHz */
+ { 16800000, 1500000000, 625, 7, 0, 8},
+ { 19200000, 1500000000, 625, 8, 0, 8},
+ { 26000000, 1500000000, 750, 13, 0, 8},
/* 1.4 GHz */
- { 12000000, 1400000000, 700, 6, 1, 8},
- { 13000000, 1400000000, 969, 9, 1, 8}, /* actual: 1399.7 MHz */
- { 16800000, 1400000000, 1000, 12, 1, 8},
- { 19200000, 1400000000, 875, 12, 1, 8},
- { 26000000, 1400000000, 700, 13, 1, 8},
+ { 12000000, 1400000000, 700, 6, 0, 8},
+ { 13000000, 1400000000, 969, 9, 0, 8}, /* actual: 1399.7 MHz */
+ { 16800000, 1400000000, 1000, 12, 0, 8},
+ { 19200000, 1400000000, 875, 12, 0, 8},
+ { 26000000, 1400000000, 700, 13, 0, 8},
/* 1.3 GHz */
- { 12000000, 1300000000, 975, 9, 1, 8},
- { 13000000, 1300000000, 1000, 10, 1, 8},
- { 16800000, 1300000000, 928, 12, 1, 8}, /* actual: 1299.2 MHz */
- { 19200000, 1300000000, 812, 12, 1, 8}, /* actual: 1299.2 MHz */
- { 26000000, 1300000000, 650, 13, 1, 8},
+ { 12000000, 1300000000, 975, 9, 0, 8},
+ { 13000000, 1300000000, 1000, 10, 0, 8},
+ { 16800000, 1300000000, 928, 12, 0, 8}, /* actual: 1299.2 MHz */
+ { 19200000, 1300000000, 812, 12, 0, 8}, /* actual: 1299.2 MHz */
+ { 26000000, 1300000000, 650, 13, 0, 8},
/* 1.2 GHz */
- { 12000000, 1200000000, 1000, 10, 1, 8},
- { 13000000, 1200000000, 923, 10, 1, 8}, /* actual: 1199.9 MHz */
- { 16800000, 1200000000, 1000, 14, 1, 8},
- { 19200000, 1200000000, 1000, 16, 1, 8},
- { 26000000, 1200000000, 600, 13, 1, 8},
+ { 12000000, 1200000000, 1000, 10, 0, 8},
+ { 13000000, 1200000000, 923, 10, 0, 8}, /* actual: 1199.9 MHz */
+ { 16800000, 1200000000, 1000, 14, 0, 8},
+ { 19200000, 1200000000, 1000, 16, 0, 8},
+ { 26000000, 1200000000, 600, 13, 0, 8},
/* 1.1 GHz */
- { 12000000, 1100000000, 825, 9, 1, 8},
- { 13000000, 1100000000, 846, 10, 1, 8}, /* actual: 1099.8 MHz */
- { 16800000, 1100000000, 982, 15, 1, 8}, /* actual: 1099.8 MHz */
- { 19200000, 1100000000, 859, 15, 1, 8}, /* actual: 1099.5 MHz */
- { 26000000, 1100000000, 550, 13, 1, 8},
+ { 12000000, 1100000000, 825, 9, 0, 8},
+ { 13000000, 1100000000, 846, 10, 0, 8}, /* actual: 1099.8 MHz */
+ { 16800000, 1100000000, 982, 15, 0, 8}, /* actual: 1099.8 MHz */
+ { 19200000, 1100000000, 859, 15, 0, 8}, /* actual: 1099.5 MHz */
+ { 26000000, 1100000000, 550, 13, 0, 8},
/* 1 GHz */
- { 12000000, 1000000000, 1000, 12, 1, 8},
- { 13000000, 1000000000, 1000, 13, 1, 8},
- { 16800000, 1000000000, 833, 14, 1, 8}, /* actual: 999.6 MHz */
- { 19200000, 1000000000, 625, 12, 1, 8},
- { 26000000, 1000000000, 1000, 26, 1, 8},
+ { 12000000, 1000000000, 1000, 12, 0, 8},
+ { 13000000, 1000000000, 1000, 13, 0, 8},
+ { 16800000, 1000000000, 833, 14, 0, 8}, /* actual: 999.6 MHz */
+ { 19200000, 1000000000, 625, 12, 0, 8},
+ { 26000000, 1000000000, 1000, 26, 0, 8},
{ 0, 0, 0, 0, 0, 0 },
};
.vco_max = 1400000000,
.base_reg = PLLC_BASE,
.misc_reg = PLLC_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1200000000,
.base_reg = PLLM_BASE,
.misc_reg = PLLM_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1400000000,
.base_reg = PLLP_BASE,
.misc_reg = PLLP_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1400000000,
.base_reg = PLLA_BASE,
.misc_reg = PLLA_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1000000000,
.base_reg = PLLD_BASE,
.misc_reg = PLLD_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
};
.vco_max = 1000000000,
.base_reg = PLLD2_BASE,
.misc_reg = PLLD2_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
};
.vco_max = 960000000,
.base_reg = PLLU_BASE,
.misc_reg = PLLU_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
+ .pdiv_tohw = pllu_p,
};
static struct tegra_clk_pll_params pll_x_params = {
.vco_max = 1700000000,
.base_reg = PLLX_BASE,
.misc_reg = PLLX_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 2400000000U,
.base_reg = PLLE_BASE,
.misc_reg = PLLE_MISC,
- .lock_bit_idx = PLLE_MISC_LOCK,
+ .lock_mask = PLLE_MISC_LOCK,
.lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
data = &tegra_periph_clk_list[i];
clk = tegra_clk_register_periph(data->name, data->parent_names,
data->num_parents, &data->periph,
- clk_base, data->offset);
+ clk_base, data->offset, data->flags);
clk_register_clkdev(clk, data->con_id, data->dev_id);
clks[data->clk_id] = clk;
}
{disp1, pll_p, 600000000, 0},
{disp2, pll_p, 600000000, 0},
{twd, clk_max, 0, 1},
+ {gr2d, pll_c, 300000000, 0},
+ {gr3d, pll_c, 300000000, 0},
{clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */
};
+static void __init tegra30_clock_apply_init_table(void)
+{
+ tegra_init_from_table(init_table, clks, clk_max);
+}
+
/*
* Some clocks may be used by different drivers depending on the board
* configuration. List those here to register them twice in the clock lookup
TEGRA_CLK_DUPLICATE(cml1, "tegra_sata_cml", NULL),
TEGRA_CLK_DUPLICATE(cml0, "tegra_pcie", "cml"),
TEGRA_CLK_DUPLICATE(pciex, "tegra_pcie", "pciex"),
- TEGRA_CLK_DUPLICATE(twd, "smp_twd", NULL),
TEGRA_CLK_DUPLICATE(vcp, "nvavp", "vcp"),
TEGRA_CLK_DUPLICATE(clk_max, NULL, NULL), /* MUST be the last entry */
};
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- tegra_init_from_table(init_table, clks, clk_max);
+ tegra_clk_apply_init_table = tegra30_clock_apply_init_table;
tegra_cpu_car_ops = &tegra30_cpu_car_ops;
}
#include "clk.h"
/* Global data of Tegra CPU CAR ops */
-struct tegra_cpu_car_ops *tegra_cpu_car_ops;
+static struct tegra_cpu_car_ops dummy_car_ops;
+struct tegra_cpu_car_ops *tegra_cpu_car_ops = &dummy_car_ops;
void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
struct clk *clks[], int clk_max)
static const struct of_device_id tegra_dt_clk_match[] = {
{ .compatible = "nvidia,tegra20-car", .data = tegra20_clock_init },
{ .compatible = "nvidia,tegra30-car", .data = tegra30_clock_init },
+ { .compatible = "nvidia,tegra114-car", .data = tegra114_clock_init },
{ }
};
{
of_clk_init(tegra_dt_clk_match);
}
+
+tegra_clk_apply_init_table_func tegra_clk_apply_init_table;
+
+void __init tegra_clocks_apply_init_table(void)
+{
+ if (!tegra_clk_apply_init_table)
+ return;
+
+ tegra_clk_apply_init_table();
+}
-/*
+ /*
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
u8 cpcon;
};
+/**
+ * struct pdiv_map - map post divider to hw value
+ *
+ * @pdiv: post divider
+ * @hw_val: value to be written to the PLL hw
+ */
+struct pdiv_map {
+ u8 pdiv;
+ u8 hw_val;
+};
+
/**
* struct clk_pll_params - PLL parameters
*
u32 base_reg;
u32 misc_reg;
u32 lock_reg;
- u32 lock_bit_idx;
+ u32 lock_mask;
u32 lock_enable_bit_idx;
+ u32 iddq_reg;
+ u32 iddq_bit_idx;
+ u32 aux_reg;
+ u32 dyn_ramp_reg;
+ u32 ext_misc_reg[3];
+ int stepa_shift;
+ int stepb_shift;
int lock_delay;
+ int max_p;
+ struct pdiv_map *pdiv_tohw;
};
/**
* TEGRA_PLL_FIXED - We are not supposed to change output frequency
* of some plls.
* TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
+ * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the
+ * base register.
+ * TEGRA_PLL_BYPASS - PLL has bypass bit
+ * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring
*/
struct tegra_clk_pll {
struct clk_hw hw;
void __iomem *clk_base;
void __iomem *pmc;
- u8 flags;
+ u32 flags;
unsigned long fixed_rate;
spinlock_t *lock;
u8 divn_shift;
#define TEGRA_PLLM BIT(5)
#define TEGRA_PLL_FIXED BIT(6)
#define TEGRA_PLLE_CONFIGURE BIT(7)
+#define TEGRA_PLL_LOCK_MISC BIT(8)
+#define TEGRA_PLL_BYPASS BIT(9)
+#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10)
extern const struct clk_ops tegra_clk_pll_ops;
extern const struct clk_ops tegra_clk_plle_ops;
struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
+
struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
+struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock);
+
+struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock);
+
+struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock);
+
+struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock, unsigned long parent_rate);
+
+struct clk *tegra_clk_register_plle_tegra114(const char *name,
+ const char *parent_name,
+ void __iomem *clk_base, unsigned long flags,
+ unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock);
+
/**
* struct tegra_clk_pll_out - PLL divider down clock
*
* TEGRA_PERIPH_ON_APB - If peripheral is in the APB bus then read the
* bus to flush the write operation in apb bus. This flag indicates
* that this peripheral is in apb bus.
+ * TEGRA_PERIPH_WAR_1005168 - Apply workaround for Tegra114 MSENC bug
*/
struct tegra_clk_periph_gate {
u32 magic;
#define TEGRA_PERIPH_NO_RESET BIT(0)
#define TEGRA_PERIPH_MANUAL_RESET BIT(1)
#define TEGRA_PERIPH_ON_APB BIT(2)
+#define TEGRA_PERIPH_WAR_1005168 BIT(3)
void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert);
extern const struct clk_ops tegra_clk_periph_gate_ops;
struct clk *tegra_clk_register_periph(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph, void __iomem *clk_base,
- u32 offset);
+ u32 offset, unsigned long flags);
struct clk *tegra_clk_register_periph_nodiv(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph, void __iomem *clk_base,
u32 offset);
-#define TEGRA_CLK_PERIPH(_mux_shift, _mux_width, _mux_flags, \
+#define TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, _mux_flags, \
_div_shift, _div_width, _div_frac_width, \
_div_flags, _clk_num, _enb_refcnt, _regs, \
- _gate_flags) \
+ _gate_flags, _table) \
{ \
.mux = { \
.flags = _mux_flags, \
.shift = _mux_shift, \
- .width = _mux_width, \
+ .mask = _mux_mask, \
+ .table = _table, \
}, \
.divider = { \
.flags = _div_flags, \
u32 offset;
const char *con_id;
const char *dev_id;
+ unsigned long flags;
};
-#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset, \
- _mux_shift, _mux_width, _mux_flags, _div_shift, \
+#define TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
+ _mux_shift, _mux_mask, _mux_flags, _div_shift, \
_div_width, _div_frac_width, _div_flags, _regs, \
- _clk_num, _enb_refcnt, _gate_flags, _clk_id) \
+ _clk_num, _enb_refcnt, _gate_flags, _clk_id, _table,\
+ _flags) \
{ \
.name = _name, \
.clk_id = _clk_id, \
.parent_names = _parent_names, \
.num_parents = ARRAY_SIZE(_parent_names), \
- .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_width, \
+ .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, \
_mux_flags, _div_shift, \
_div_width, _div_frac_width, \
_div_flags, _clk_num, \
_enb_refcnt, _regs, \
- _gate_flags), \
+ _gate_flags, _table), \
.offset = _offset, \
.con_id = _con_id, \
.dev_id = _dev_id, \
+ .flags = _flags \
}
+#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset,\
+ _mux_shift, _mux_width, _mux_flags, _div_shift, \
+ _div_width, _div_frac_width, _div_flags, _regs, \
+ _clk_num, _enb_refcnt, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
+ _mux_shift, BIT(_mux_width) - 1, _mux_flags, \
+ _div_shift, _div_width, _div_frac_width, _div_flags, \
+ _regs, _clk_num, _enb_refcnt, _gate_flags, _clk_id,\
+ NULL, 0)
+
/**
* struct clk_super_mux - super clock
*
static inline void tegra30_clock_init(struct device_node *np) {}
#endif /* CONFIG_ARCH_TEGRA_3x_SOC */
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+void tegra114_clock_init(struct device_node *np);
+#else
+static inline void tegra114_clock_init(struct device_node *np) {}
+#endif /* CONFIG_ARCH_TEGRA114_SOC */
+
+typedef void (*tegra_clk_apply_init_table_func)(void);
+extern tegra_clk_apply_init_table_func tegra_clk_apply_init_table;
+
#endif /* TEGRA_CLK_H */
struct clk_prcmu {
struct clk_hw hw;
u8 cg_sel;
+ int is_prepared;
int is_enabled;
+ int opp_requested;
};
/* PRCMU clock operations. */
static int clk_prcmu_prepare(struct clk_hw *hw)
{
+ int ret;
struct clk_prcmu *clk = to_clk_prcmu(hw);
- return prcmu_request_clock(clk->cg_sel, true);
+
+ ret = prcmu_request_clock(clk->cg_sel, true);
+ if (!ret)
+ clk->is_prepared = 1;
+
+ return ret;;
}
static void clk_prcmu_unprepare(struct clk_hw *hw)
struct clk_prcmu *clk = to_clk_prcmu(hw);
if (prcmu_request_clock(clk->cg_sel, false))
pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
- hw->init->name);
+ __clk_get_name(hw->clk));
+ else
+ clk->is_prepared = 0;
+}
+
+static int clk_prcmu_is_prepared(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return clk->is_prepared;
}
static int clk_prcmu_enable(struct clk_hw *hw)
return prcmu_set_clock_rate(clk->cg_sel, rate);
}
-static int request_ape_opp100(bool enable)
-{
- static int reqs;
- int err = 0;
-
- if (enable) {
- if (!reqs)
- err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
- "clock", 100);
- if (!err)
- reqs++;
- } else {
- reqs--;
- if (!reqs)
- prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
- "clock");
- }
- return err;
-}
-
static int clk_prcmu_opp_prepare(struct clk_hw *hw)
{
int err;
struct clk_prcmu *clk = to_clk_prcmu(hw);
- err = request_ape_opp100(true);
- if (err) {
- pr_err("clk_prcmu: %s failed to request APE OPP100 for %s.\n",
- __func__, hw->init->name);
- return err;
+ if (!clk->opp_requested) {
+ err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
+ (char *)__clk_get_name(hw->clk),
+ 100);
+ if (err) {
+ pr_err("clk_prcmu: %s fail req APE OPP for %s.\n",
+ __func__, __clk_get_name(hw->clk));
+ return err;
+ }
+ clk->opp_requested = 1;
}
err = prcmu_request_clock(clk->cg_sel, true);
- if (err)
- request_ape_opp100(false);
+ if (err) {
+ prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+ (char *)__clk_get_name(hw->clk));
+ clk->opp_requested = 0;
+ return err;
+ }
- return err;
+ clk->is_prepared = 1;
+ return 0;
}
static void clk_prcmu_opp_unprepare(struct clk_hw *hw)
{
struct clk_prcmu *clk = to_clk_prcmu(hw);
- if (prcmu_request_clock(clk->cg_sel, false))
- goto out_error;
- if (request_ape_opp100(false))
- goto out_error;
- return;
-
-out_error:
- pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
- hw->init->name);
+ if (prcmu_request_clock(clk->cg_sel, false)) {
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ __clk_get_name(hw->clk));
+ return;
+ }
+
+ if (clk->opp_requested) {
+ prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+ (char *)__clk_get_name(hw->clk));
+ clk->opp_requested = 0;
+ }
+
+ clk->is_prepared = 0;
}
static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw)
int err;
struct clk_prcmu *clk = to_clk_prcmu(hw);
- err = prcmu_request_ape_opp_100_voltage(true);
- if (err) {
- pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n",
- __func__, hw->init->name);
- return err;
+ if (!clk->opp_requested) {
+ err = prcmu_request_ape_opp_100_voltage(true);
+ if (err) {
+ pr_err("clk_prcmu: %s fail req APE OPP VOLT for %s.\n",
+ __func__, __clk_get_name(hw->clk));
+ return err;
+ }
+ clk->opp_requested = 1;
}
err = prcmu_request_clock(clk->cg_sel, true);
- if (err)
+ if (err) {
prcmu_request_ape_opp_100_voltage(false);
+ clk->opp_requested = 0;
+ return err;
+ }
- return err;
+ clk->is_prepared = 1;
+ return 0;
}
static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw)
{
struct clk_prcmu *clk = to_clk_prcmu(hw);
- if (prcmu_request_clock(clk->cg_sel, false))
- goto out_error;
- if (prcmu_request_ape_opp_100_voltage(false))
- goto out_error;
- return;
-
-out_error:
- pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
- hw->init->name);
+ if (prcmu_request_clock(clk->cg_sel, false)) {
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ __clk_get_name(hw->clk));
+ return;
+ }
+
+ if (clk->opp_requested) {
+ prcmu_request_ape_opp_100_voltage(false);
+ clk->opp_requested = 0;
+ }
+
+ clk->is_prepared = 0;
}
static struct clk_ops clk_prcmu_scalable_ops = {
.prepare = clk_prcmu_prepare,
.unprepare = clk_prcmu_unprepare,
+ .is_prepared = clk_prcmu_is_prepared,
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
.is_enabled = clk_prcmu_is_enabled,
static struct clk_ops clk_prcmu_gate_ops = {
.prepare = clk_prcmu_prepare,
.unprepare = clk_prcmu_unprepare,
+ .is_prepared = clk_prcmu_is_prepared,
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
.is_enabled = clk_prcmu_is_enabled,
static struct clk_ops clk_prcmu_opp_gate_ops = {
.prepare = clk_prcmu_opp_prepare,
.unprepare = clk_prcmu_opp_unprepare,
+ .is_prepared = clk_prcmu_is_prepared,
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
.is_enabled = clk_prcmu_is_enabled,
static struct clk_ops clk_prcmu_opp_volt_scalable_ops = {
.prepare = clk_prcmu_opp_volt_prepare,
.unprepare = clk_prcmu_opp_volt_unprepare,
+ .is_prepared = clk_prcmu_is_prepared,
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
.is_enabled = clk_prcmu_is_enabled,
}
clk->cg_sel = cg_sel;
+ clk->is_prepared = 1;
clk->is_enabled = 1;
+ clk->opp_requested = 0;
/* "rate" can be used for changing the initial frequency */
if (rate)
prcmu_set_clock_rate(cg_sel, rate);
config VT8500_TIMER
bool
+config CADENCE_TTC_TIMER
+ bool
+
config CLKSRC_NOMADIK_MTU
bool
depends on (ARCH_NOMADIK || ARCH_U8500)
help
This option enables support for the Meta per-thread timers.
+config CLKSRC_EXYNOS_MCT
+ def_bool y if ARCH_EXYNOS
+ help
+ Support for Multi Core Timer controller on Exynos SoCs.
+
config CLKSRC_SAMSUNG_PWM
bool
select CLKSRC_MMIO
obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
+obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o
+obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
--- /dev/null
+/*
+ * This file contains driver for the Cadence Triple Timer Counter Rev 06
+ *
+ * Copyright (C) 2011-2013 Xilinx
+ *
+ * based on arch/mips/kernel/time.c timer driver
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
+
+/*
+ * This driver configures the 2 16-bit count-up timers as follows:
+ *
+ * T1: Timer 1, clocksource for generic timekeeping
+ * T2: Timer 2, clockevent source for hrtimers
+ * T3: Timer 3, <unused>
+ *
+ * The input frequency to the timer module for emulation is 2.5MHz which is
+ * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32,
+ * the timers are clocked at 78.125KHz (12.8 us resolution).
+
+ * The input frequency to the timer module in silicon is configurable and
+ * obtained from device tree. The pre-scaler of 32 is used.
+ */
+
+/*
+ * Timer Register Offset Definitions of Timer 1, Increment base address by 4
+ * and use same offsets for Timer 2
+ */
+#define TTC_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */
+#define TTC_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */
+#define TTC_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */
+#define TTC_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */
+#define TTC_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */
+#define TTC_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */
+
+#define TTC_CNT_CNTRL_DISABLE_MASK 0x1
+
+/*
+ * Setup the timers to use pre-scaling, using a fixed value for now that will
+ * work across most input frequency, but it may need to be more dynamic
+ */
+#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */
+#define PRESCALE 2048 /* The exponent must match this */
+#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1)
+#define CLK_CNTRL_PRESCALE_EN 1
+#define CNT_CNTRL_RESET (1 << 4)
+
+/**
+ * struct ttc_timer - This definition defines local timer structure
+ *
+ * @base_addr: Base address of timer
+ * @clk: Associated clock source
+ * @clk_rate_change_nb Notifier block for clock rate changes
+ */
+struct ttc_timer {
+ void __iomem *base_addr;
+ struct clk *clk;
+ struct notifier_block clk_rate_change_nb;
+};
+
+#define to_ttc_timer(x) \
+ container_of(x, struct ttc_timer, clk_rate_change_nb)
+
+struct ttc_timer_clocksource {
+ struct ttc_timer ttc;
+ struct clocksource cs;
+};
+
+#define to_ttc_timer_clksrc(x) \
+ container_of(x, struct ttc_timer_clocksource, cs)
+
+struct ttc_timer_clockevent {
+ struct ttc_timer ttc;
+ struct clock_event_device ce;
+};
+
+#define to_ttc_timer_clkevent(x) \
+ container_of(x, struct ttc_timer_clockevent, ce)
+
+/**
+ * ttc_set_interval - Set the timer interval value
+ *
+ * @timer: Pointer to the timer instance
+ * @cycles: Timer interval ticks
+ **/
+static void ttc_set_interval(struct ttc_timer *timer,
+ unsigned long cycles)
+{
+ u32 ctrl_reg;
+
+ /* Disable the counter, set the counter value and re-enable counter */
+ ctrl_reg = __raw_readl(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+
+ __raw_writel(cycles, timer->base_addr + TTC_INTR_VAL_OFFSET);
+
+ /*
+ * Reset the counter (0x10) so that it starts from 0, one-shot
+ * mode makes this needed for timing to be right.
+ */
+ ctrl_reg |= CNT_CNTRL_RESET;
+ ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+}
+
+/**
+ * ttc_clock_event_interrupt - Clock event timer interrupt handler
+ *
+ * @irq: IRQ number of the Timer
+ * @dev_id: void pointer to the ttc_timer instance
+ *
+ * returns: Always IRQ_HANDLED - success
+ **/
+static irqreturn_t ttc_clock_event_interrupt(int irq, void *dev_id)
+{
+ struct ttc_timer_clockevent *ttce = dev_id;
+ struct ttc_timer *timer = &ttce->ttc;
+
+ /* Acknowledge the interrupt and call event handler */
+ __raw_readl(timer->base_addr + TTC_ISR_OFFSET);
+
+ ttce->ce.event_handler(&ttce->ce);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * __ttc_clocksource_read - Reads the timer counter register
+ *
+ * returns: Current timer counter register value
+ **/
+static cycle_t __ttc_clocksource_read(struct clocksource *cs)
+{
+ struct ttc_timer *timer = &to_ttc_timer_clksrc(cs)->ttc;
+
+ return (cycle_t)__raw_readl(timer->base_addr +
+ TTC_COUNT_VAL_OFFSET);
+}
+
+/**
+ * ttc_set_next_event - Sets the time interval for next event
+ *
+ * @cycles: Timer interval ticks
+ * @evt: Address of clock event instance
+ *
+ * returns: Always 0 - success
+ **/
+static int ttc_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+ struct ttc_timer *timer = &ttce->ttc;
+
+ ttc_set_interval(timer, cycles);
+ return 0;
+}
+
+/**
+ * ttc_set_mode - Sets the mode of timer
+ *
+ * @mode: Mode to be set
+ * @evt: Address of clock event instance
+ **/
+static void ttc_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+ struct ttc_timer *timer = &ttce->ttc;
+ u32 ctrl_reg;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ ttc_set_interval(timer,
+ DIV_ROUND_CLOSEST(clk_get_rate(ttce->ttc.clk),
+ PRESCALE * HZ));
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ ctrl_reg = __raw_readl(timer->base_addr +
+ TTC_CNT_CNTRL_OFFSET);
+ ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg,
+ timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ ctrl_reg = __raw_readl(timer->base_addr +
+ TTC_CNT_CNTRL_OFFSET);
+ ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg,
+ timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ break;
+ }
+}
+
+static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+ struct ttc_timer *ttc = to_ttc_timer(nb);
+ struct ttc_timer_clocksource *ttccs = container_of(ttc,
+ struct ttc_timer_clocksource, ttc);
+
+ switch (event) {
+ case POST_RATE_CHANGE:
+ /*
+ * Do whatever is necessary to maintain a proper time base
+ *
+ * I cannot find a way to adjust the currently used clocksource
+ * to the new frequency. __clocksource_updatefreq_hz() sounds
+ * good, but does not work. Not sure what's that missing.
+ *
+ * This approach works, but triggers two clocksource switches.
+ * The first after unregister to clocksource jiffies. And
+ * another one after the register to the newly registered timer.
+ *
+ * Alternatively we could 'waste' another HW timer to ping pong
+ * between clock sources. That would also use one register and
+ * one unregister call, but only trigger one clocksource switch
+ * for the cost of another HW timer used by the OS.
+ */
+ clocksource_unregister(&ttccs->cs);
+ clocksource_register_hz(&ttccs->cs,
+ ndata->new_rate / PRESCALE);
+ /* fall through */
+ case PRE_RATE_CHANGE:
+ case ABORT_RATE_CHANGE:
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
+{
+ struct ttc_timer_clocksource *ttccs;
+ int err;
+
+ ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL);
+ if (WARN_ON(!ttccs))
+ return;
+
+ ttccs->ttc.clk = clk;
+
+ err = clk_prepare_enable(ttccs->ttc.clk);
+ if (WARN_ON(err)) {
+ kfree(ttccs);
+ return;
+ }
+
+ ttccs->ttc.clk_rate_change_nb.notifier_call =
+ ttc_rate_change_clocksource_cb;
+ ttccs->ttc.clk_rate_change_nb.next = NULL;
+ if (clk_notifier_register(ttccs->ttc.clk,
+ &ttccs->ttc.clk_rate_change_nb))
+ pr_warn("Unable to register clock notifier.\n");
+
+ ttccs->ttc.base_addr = base;
+ ttccs->cs.name = "ttc_clocksource";
+ ttccs->cs.rating = 200;
+ ttccs->cs.read = __ttc_clocksource_read;
+ ttccs->cs.mask = CLOCKSOURCE_MASK(16);
+ ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ /*
+ * Setup the clock source counter to be an incrementing counter
+ * with no interrupt and it rolls over at 0xFFFF. Pre-scale
+ * it by 32 also. Let it start running now.
+ */
+ __raw_writel(0x0, ttccs->ttc.base_addr + TTC_IER_OFFSET);
+ __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ __raw_writel(CNT_CNTRL_RESET,
+ ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
+
+ err = clocksource_register_hz(&ttccs->cs,
+ clk_get_rate(ttccs->ttc.clk) / PRESCALE);
+ if (WARN_ON(err)) {
+ kfree(ttccs);
+ return;
+ }
+}
+
+static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+ struct ttc_timer *ttc = to_ttc_timer(nb);
+ struct ttc_timer_clockevent *ttcce = container_of(ttc,
+ struct ttc_timer_clockevent, ttc);
+
+ switch (event) {
+ case POST_RATE_CHANGE:
+ {
+ unsigned long flags;
+
+ /*
+ * clockevents_update_freq should be called with IRQ disabled on
+ * the CPU the timer provides events for. The timer we use is
+ * common to both CPUs, not sure if we need to run on both
+ * cores.
+ */
+ local_irq_save(flags);
+ clockevents_update_freq(&ttcce->ce,
+ ndata->new_rate / PRESCALE);
+ local_irq_restore(flags);
+
+ /* fall through */
+ }
+ case PRE_RATE_CHANGE:
+ case ABORT_RATE_CHANGE:
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static void __init ttc_setup_clockevent(struct clk *clk,
+ void __iomem *base, u32 irq)
+{
+ struct ttc_timer_clockevent *ttcce;
+ int err;
+
+ ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL);
+ if (WARN_ON(!ttcce))
+ return;
+
+ ttcce->ttc.clk = clk;
+
+ err = clk_prepare_enable(ttcce->ttc.clk);
+ if (WARN_ON(err)) {
+ kfree(ttcce);
+ return;
+ }
+
+ ttcce->ttc.clk_rate_change_nb.notifier_call =
+ ttc_rate_change_clockevent_cb;
+ ttcce->ttc.clk_rate_change_nb.next = NULL;
+ if (clk_notifier_register(ttcce->ttc.clk,
+ &ttcce->ttc.clk_rate_change_nb))
+ pr_warn("Unable to register clock notifier.\n");
+
+ ttcce->ttc.base_addr = base;
+ ttcce->ce.name = "ttc_clockevent";
+ ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ ttcce->ce.set_next_event = ttc_set_next_event;
+ ttcce->ce.set_mode = ttc_set_mode;
+ ttcce->ce.rating = 200;
+ ttcce->ce.irq = irq;
+ ttcce->ce.cpumask = cpu_possible_mask;
+
+ /*
+ * Setup the clock event timer to be an interval timer which
+ * is prescaled by 32 using the interval interrupt. Leave it
+ * disabled for now.
+ */
+ __raw_writel(0x23, ttcce->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
+ __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+ ttcce->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ __raw_writel(0x1, ttcce->ttc.base_addr + TTC_IER_OFFSET);
+
+ err = request_irq(irq, ttc_clock_event_interrupt,
+ IRQF_DISABLED | IRQF_TIMER,
+ ttcce->ce.name, ttcce);
+ if (WARN_ON(err)) {
+ kfree(ttcce);
+ return;
+ }
+
+ clockevents_config_and_register(&ttcce->ce,
+ clk_get_rate(ttcce->ttc.clk) / PRESCALE, 1, 0xfffe);
+}
+
+/**
+ * ttc_timer_init - Initialize the timer
+ *
+ * Initializes the timer hardware and register the clock source and clock event
+ * timers with Linux kernal timer framework
+ */
+static void __init ttc_timer_init(struct device_node *timer)
+{
+ unsigned int irq;
+ void __iomem *timer_baseaddr;
+ struct clk *clk;
+ static int initialized;
+
+ if (initialized)
+ return;
+
+ initialized = 1;
+
+ /*
+ * Get the 1st Triple Timer Counter (TTC) block from the device tree
+ * and use it. Note that the event timer uses the interrupt and it's the
+ * 2nd TTC hence the irq_of_parse_and_map(,1)
+ */
+ timer_baseaddr = of_iomap(timer, 0);
+ if (!timer_baseaddr) {
+ pr_err("ERROR: invalid timer base address\n");
+ BUG();
+ }
+
+ irq = irq_of_parse_and_map(timer, 1);
+ if (irq <= 0) {
+ pr_err("ERROR: invalid interrupt number\n");
+ BUG();
+ }
+
+ clk = of_clk_get_by_name(timer, "cpu_1x");
+ if (IS_ERR(clk)) {
+ pr_err("ERROR: timer input clock not found\n");
+ BUG();
+ }
+
+ ttc_setup_clocksource(clk, timer_baseaddr);
+ ttc_setup_clockevent(clk, timer_baseaddr + 4, irq);
+
+ pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq);
+}
+
+CLOCKSOURCE_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init);
}
};
-module_platform_driver(em_sti_device_driver);
+static int __init em_sti_init(void)
+{
+ return platform_driver_register(&em_sti_device_driver);
+}
+
+static void __exit em_sti_exit(void)
+{
+ platform_driver_unregister(&em_sti_device_driver);
+}
+
+subsys_initcall(em_sti_init);
+module_exit(em_sti_exit);
MODULE_AUTHOR("Magnus Damm");
MODULE_DESCRIPTION("Renesas Emma Mobile STI Timer Driver");
#include <linux/delay.h>
#include <linux/percpu.h>
#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/clocksource.h>
#include <asm/arch_timer.h>
#include <asm/localtimer.h>
-
-#include <plat/cpu.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/regs-mct.h>
#include <asm/mach/time.h>
+#define EXYNOS4_MCTREG(x) (x)
+#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
+#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
+#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
+#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
+#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
+#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
+#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
+#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
+#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
+#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
+#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK (0xffffff00)
+
+#define MCT_L_TCNTB_OFFSET (0x00)
+#define MCT_L_ICNTB_OFFSET (0x08)
+#define MCT_L_TCON_OFFSET (0x20)
+#define MCT_L_INT_CSTAT_OFFSET (0x30)
+#define MCT_L_INT_ENB_OFFSET (0x34)
+#define MCT_L_WSTAT_OFFSET (0x40)
+#define MCT_G_TCON_START (1 << 8)
+#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
+#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
+#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
+#define MCT_L_TCON_INT_START (1 << 1)
+#define MCT_L_TCON_TIMER_START (1 << 0)
+
#define TICK_BASE_CNT 1
enum {
MCT_INT_PPI
};
+enum {
+ MCT_G0_IRQ,
+ MCT_G1_IRQ,
+ MCT_G2_IRQ,
+ MCT_G3_IRQ,
+ MCT_L0_IRQ,
+ MCT_L1_IRQ,
+ MCT_L2_IRQ,
+ MCT_L3_IRQ,
+ MCT_NR_IRQS,
+};
+
+static void __iomem *reg_base;
static unsigned long clk_rate;
static unsigned int mct_int_type;
+static int mct_irqs[MCT_NR_IRQS];
struct mct_clock_event_device {
struct clock_event_device *evt;
- void __iomem *base;
+ unsigned long base;
char name[10];
};
-static void exynos4_mct_write(unsigned int value, void *addr)
+static void exynos4_mct_write(unsigned int value, unsigned long offset)
{
- void __iomem *stat_addr;
+ unsigned long stat_addr;
u32 mask;
u32 i;
- __raw_writel(value, addr);
+ __raw_writel(value, reg_base + offset);
- if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
- u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
- switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
- case (u32) MCT_L_TCON_OFFSET:
- stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
+ stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
+ switch (offset & EXYNOS4_MCT_L_MASK) {
+ case MCT_L_TCON_OFFSET:
mask = 1 << 3; /* L_TCON write status */
break;
- case (u32) MCT_L_ICNTB_OFFSET:
- stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ case MCT_L_ICNTB_OFFSET:
mask = 1 << 1; /* L_ICNTB write status */
break;
- case (u32) MCT_L_TCNTB_OFFSET:
- stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ case MCT_L_TCNTB_OFFSET:
mask = 1 << 0; /* L_TCNTB write status */
break;
default:
return;
}
} else {
- switch ((u32) addr) {
- case (u32) EXYNOS4_MCT_G_TCON:
+ switch (offset) {
+ case EXYNOS4_MCT_G_TCON:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 16; /* G_TCON write status */
break;
- case (u32) EXYNOS4_MCT_G_COMP0_L:
+ case EXYNOS4_MCT_G_COMP0_L:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 0; /* G_COMP0_L write status */
break;
- case (u32) EXYNOS4_MCT_G_COMP0_U:
+ case EXYNOS4_MCT_G_COMP0_U:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 1; /* G_COMP0_U write status */
break;
- case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+ case EXYNOS4_MCT_G_COMP0_ADD_INCR:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
break;
- case (u32) EXYNOS4_MCT_G_CNT_L:
+ case EXYNOS4_MCT_G_CNT_L:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 0; /* G_CNT_L write status */
break;
- case (u32) EXYNOS4_MCT_G_CNT_U:
+ case EXYNOS4_MCT_G_CNT_U:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 1; /* G_CNT_U write status */
break;
/* Wait maximum 1 ms until written values are applied */
for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
- if (__raw_readl(stat_addr) & mask) {
- __raw_writel(mask, stat_addr);
+ if (__raw_readl(reg_base + stat_addr) & mask) {
+ __raw_writel(mask, reg_base + stat_addr);
return;
}
- panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr);
+ panic("MCT hangs after writing %d (offset:0x%lx)\n", value, offset);
}
/* Clocksource handling */
exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L);
exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U);
- reg = __raw_readl(EXYNOS4_MCT_G_TCON);
+ reg = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
reg |= MCT_G_TCON_START;
exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
}
static cycle_t exynos4_frc_read(struct clocksource *cs)
{
unsigned int lo, hi;
- u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
+ u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
do {
hi = hi2;
- lo = __raw_readl(EXYNOS4_MCT_G_CNT_L);
- hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
+ lo = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_L);
+ hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
} while (hi != hi2);
return ((cycle_t)hi << 32) | lo;
{
unsigned int tcon;
- tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
+ tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
unsigned int tcon;
cycle_t comp_cycle;
- tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
+ tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
if (mode == CLOCK_EVT_MODE_PERIODIC) {
tcon |= MCT_G_TCON_COMP0_AUTO_INC;
mct_comp_device.cpumask = cpumask_of(0);
clockevents_config_and_register(&mct_comp_device, clk_rate,
0xf, 0xffffffff);
-
- if (soc_is_exynos5250())
- setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
- else
- setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq);
+ setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
}
#ifdef CONFIG_LOCAL_TIMERS
{
unsigned long tmp;
unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
- void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET;
+ unsigned long offset = mevt->base + MCT_L_TCON_OFFSET;
- tmp = __raw_readl(addr);
+ tmp = __raw_readl(reg_base + offset);
if (tmp & mask) {
tmp &= ~mask;
- exynos4_mct_write(tmp, addr);
+ exynos4_mct_write(tmp, offset);
}
}
/* enable MCT tick interrupt */
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
- tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET);
+ tmp = __raw_readl(reg_base + mevt->base + MCT_L_TCON_OFFSET);
tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
MCT_L_TCON_INTERVAL_MODE;
exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
exynos4_mct_tick_stop(mevt);
/* Clear the MCT tick interrupt */
- if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+ if (__raw_readl(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
return 1;
} else {
{
struct mct_clock_event_device *mevt;
unsigned int cpu = smp_processor_id();
- int mct_lx_irq;
mevt = this_cpu_ptr(&percpu_mct_tick);
mevt->evt = evt;
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
- mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 :
- EXYNOS5_IRQ_MCT_L0;
mct_tick0_event_irq.dev_id = mevt;
- evt->irq = mct_lx_irq;
- setup_irq(mct_lx_irq, &mct_tick0_event_irq);
+ evt->irq = mct_irqs[MCT_L0_IRQ];
+ setup_irq(evt->irq, &mct_tick0_event_irq);
} else {
- mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 :
- EXYNOS5_IRQ_MCT_L1;
mct_tick1_event_irq.dev_id = mevt;
- evt->irq = mct_lx_irq;
- setup_irq(mct_lx_irq, &mct_tick1_event_irq);
- irq_set_affinity(mct_lx_irq, cpumask_of(1));
+ evt->irq = mct_irqs[MCT_L1_IRQ];
+ setup_irq(evt->irq, &mct_tick1_event_irq);
+ irq_set_affinity(evt->irq, cpumask_of(1));
}
} else {
- enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
+ enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
}
return 0;
else
remove_irq(evt->irq, &mct_tick1_event_irq);
else
- disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER);
+ disable_percpu_irq(mct_irqs[MCT_L0_IRQ]);
}
static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
};
#endif /* CONFIG_LOCAL_TIMERS */
-static void __init exynos4_timer_resources(void)
+static void __init exynos4_timer_resources(struct device_node *np, void __iomem *base)
{
- struct clk *mct_clk;
- mct_clk = clk_get(NULL, "xtal");
+ struct clk *mct_clk, *tick_clk;
+
+ tick_clk = np ? of_clk_get_by_name(np, "fin_pll") :
+ clk_get(NULL, "fin_pll");
+ if (IS_ERR(tick_clk))
+ panic("%s: unable to determine tick clock rate\n", __func__);
+ clk_rate = clk_get_rate(tick_clk);
- clk_rate = clk_get_rate(mct_clk);
+ mct_clk = np ? of_clk_get_by_name(np, "mct") : clk_get(NULL, "mct");
+ if (IS_ERR(mct_clk))
+ panic("%s: unable to retrieve mct clock instance\n", __func__);
+ clk_prepare_enable(mct_clk);
+
+ reg_base = base;
+ if (!reg_base)
+ panic("%s: unable to ioremap mct address space\n", __func__);
#ifdef CONFIG_LOCAL_TIMERS
if (mct_int_type == MCT_INT_PPI) {
int err;
- err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER,
+ err = request_percpu_irq(mct_irqs[MCT_L0_IRQ],
exynos4_mct_tick_isr, "MCT",
&percpu_mct_tick);
WARN(err, "MCT: can't request IRQ %d (%d)\n",
- EXYNOS_IRQ_MCT_LOCALTIMER, err);
+ mct_irqs[MCT_L0_IRQ], err);
}
local_timer_register(&exynos4_mct_tick_ops);
#endif /* CONFIG_LOCAL_TIMERS */
}
-void __init exynos4_timer_init(void)
+void __init mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1)
{
- if (soc_is_exynos5440()) {
- arch_timer_of_register();
- return;
- }
+ mct_irqs[MCT_G0_IRQ] = irq_g0;
+ mct_irqs[MCT_L0_IRQ] = irq_l0;
+ mct_irqs[MCT_L1_IRQ] = irq_l1;
+ mct_int_type = MCT_INT_SPI;
- if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
- mct_int_type = MCT_INT_SPI;
- else
- mct_int_type = MCT_INT_PPI;
+ exynos4_timer_resources(NULL, base);
+ exynos4_clocksource_init();
+ exynos4_clockevent_init();
+}
+
+static void __init mct_init_dt(struct device_node *np, unsigned int int_type)
+{
+ u32 nr_irqs, i;
+
+ mct_int_type = int_type;
- exynos4_timer_resources();
+ /* This driver uses only one global timer interrupt */
+ mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
+
+ /*
+ * Find out the number of local irqs specified. The local
+ * timer irqs are specified after the four global timer
+ * irqs are specified.
+ */
+#ifdef CONFIG_OF
+ nr_irqs = of_irq_count(np);
+#else
+ nr_irqs = 0;
+#endif
+ for (i = MCT_L0_IRQ; i < nr_irqs; i++)
+ mct_irqs[i] = irq_of_parse_and_map(np, i);
+
+ exynos4_timer_resources(np, of_iomap(np, 0));
exynos4_clocksource_init();
exynos4_clockevent_init();
}
+
+
+static void __init mct_init_spi(struct device_node *np)
+{
+ return mct_init_dt(np, MCT_INT_SPI);
+}
+
+static void __init mct_init_ppi(struct device_node *np)
+{
+ return mct_init_dt(np, MCT_INT_PPI);
+}
+CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi);
+CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi);
struct clocksource cs;
unsigned long total_cycles;
bool cs_enabled;
+
+ /* callbacks for CMSTR and CMCSR access */
+ unsigned long (*read_control)(void __iomem *base, unsigned long offs);
+ void (*write_control)(void __iomem *base, unsigned long offs,
+ unsigned long value);
+
+ /* callbacks for CMCNT and CMCOR access */
+ unsigned long (*read_count)(void __iomem *base, unsigned long offs);
+ void (*write_count)(void __iomem *base, unsigned long offs,
+ unsigned long value);
};
-static DEFINE_RAW_SPINLOCK(sh_cmt_lock);
+/* Examples of supported CMT timer register layouts and I/O access widths:
+ *
+ * "16-bit counter and 16-bit control" as found on sh7263:
+ * CMSTR 0xfffec000 16-bit
+ * CMCSR 0xfffec002 16-bit
+ * CMCNT 0xfffec004 16-bit
+ * CMCOR 0xfffec006 16-bit
+ *
+ * "32-bit counter and 16-bit control" as found on sh7372, sh73a0, r8a7740:
+ * CMSTR 0xffca0000 16-bit
+ * CMCSR 0xffca0060 16-bit
+ * CMCNT 0xffca0064 32-bit
+ * CMCOR 0xffca0068 32-bit
+ */
+
+static unsigned long sh_cmt_read16(void __iomem *base, unsigned long offs)
+{
+ return ioread16(base + (offs << 1));
+}
+
+static unsigned long sh_cmt_read32(void __iomem *base, unsigned long offs)
+{
+ return ioread32(base + (offs << 2));
+}
+
+static void sh_cmt_write16(void __iomem *base, unsigned long offs,
+ unsigned long value)
+{
+ iowrite16(value, base + (offs << 1));
+}
+
+static void sh_cmt_write32(void __iomem *base, unsigned long offs,
+ unsigned long value)
+{
+ iowrite32(value, base + (offs << 2));
+}
-#define CMSTR -1 /* shared register */
#define CMCSR 0 /* channel register */
#define CMCNT 1 /* channel register */
#define CMCOR 2 /* channel register */
-static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr)
+static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_priv *p)
{
struct sh_timer_config *cfg = p->pdev->dev.platform_data;
- void __iomem *base = p->mapbase;
- unsigned long offs;
-
- if (reg_nr == CMSTR) {
- offs = 0;
- base -= cfg->channel_offset;
- } else
- offs = reg_nr;
-
- if (p->width == 16)
- offs <<= 1;
- else {
- offs <<= 2;
- if ((reg_nr == CMCNT) || (reg_nr == CMCOR))
- return ioread32(base + offs);
- }
- return ioread16(base + offs);
+ return p->read_control(p->mapbase - cfg->channel_offset, 0);
}
-static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr,
- unsigned long value)
+static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_priv *p)
+{
+ return p->read_control(p->mapbase, CMCSR);
+}
+
+static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_priv *p)
+{
+ return p->read_count(p->mapbase, CMCNT);
+}
+
+static inline void sh_cmt_write_cmstr(struct sh_cmt_priv *p,
+ unsigned long value)
{
struct sh_timer_config *cfg = p->pdev->dev.platform_data;
- void __iomem *base = p->mapbase;
- unsigned long offs;
-
- if (reg_nr == CMSTR) {
- offs = 0;
- base -= cfg->channel_offset;
- } else
- offs = reg_nr;
-
- if (p->width == 16)
- offs <<= 1;
- else {
- offs <<= 2;
- if ((reg_nr == CMCNT) || (reg_nr == CMCOR)) {
- iowrite32(value, base + offs);
- return;
- }
- }
- iowrite16(value, base + offs);
+ p->write_control(p->mapbase - cfg->channel_offset, 0, value);
+}
+
+static inline void sh_cmt_write_cmcsr(struct sh_cmt_priv *p,
+ unsigned long value)
+{
+ p->write_control(p->mapbase, CMCSR, value);
+}
+
+static inline void sh_cmt_write_cmcnt(struct sh_cmt_priv *p,
+ unsigned long value)
+{
+ p->write_count(p->mapbase, CMCNT, value);
+}
+
+static inline void sh_cmt_write_cmcor(struct sh_cmt_priv *p,
+ unsigned long value)
+{
+ p->write_count(p->mapbase, CMCOR, value);
}
static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p,
unsigned long v1, v2, v3;
int o1, o2;
- o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit;
+ o1 = sh_cmt_read_cmcsr(p) & p->overflow_bit;
/* Make sure the timer value is stable. Stolen from acpi_pm.c */
do {
o2 = o1;
- v1 = sh_cmt_read(p, CMCNT);
- v2 = sh_cmt_read(p, CMCNT);
- v3 = sh_cmt_read(p, CMCNT);
- o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit;
+ v1 = sh_cmt_read_cmcnt(p);
+ v2 = sh_cmt_read_cmcnt(p);
+ v3 = sh_cmt_read_cmcnt(p);
+ o1 = sh_cmt_read_cmcsr(p) & p->overflow_bit;
} while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
|| (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
return v2;
}
+static DEFINE_RAW_SPINLOCK(sh_cmt_lock);
static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start)
{
/* start stop register shared by multiple timer channels */
raw_spin_lock_irqsave(&sh_cmt_lock, flags);
- value = sh_cmt_read(p, CMSTR);
+ value = sh_cmt_read_cmstr(p);
if (start)
value |= 1 << cfg->timer_bit;
else
value &= ~(1 << cfg->timer_bit);
- sh_cmt_write(p, CMSTR, value);
+ sh_cmt_write_cmstr(p, value);
raw_spin_unlock_irqrestore(&sh_cmt_lock, flags);
}
/* configure channel, periodic mode and maximum timeout */
if (p->width == 16) {
*rate = clk_get_rate(p->clk) / 512;
- sh_cmt_write(p, CMCSR, 0x43);
+ sh_cmt_write_cmcsr(p, 0x43);
} else {
*rate = clk_get_rate(p->clk) / 8;
- sh_cmt_write(p, CMCSR, 0x01a4);
+ sh_cmt_write_cmcsr(p, 0x01a4);
}
- sh_cmt_write(p, CMCOR, 0xffffffff);
- sh_cmt_write(p, CMCNT, 0);
+ sh_cmt_write_cmcor(p, 0xffffffff);
+ sh_cmt_write_cmcnt(p, 0);
/*
* According to the sh73a0 user's manual, as CMCNT can be operated
* take RCLKx2 at maximum.
*/
for (k = 0; k < 100; k++) {
- if (!sh_cmt_read(p, CMCNT))
+ if (!sh_cmt_read_cmcnt(p))
break;
udelay(1);
}
- if (sh_cmt_read(p, CMCNT)) {
+ if (sh_cmt_read_cmcnt(p)) {
dev_err(&p->pdev->dev, "cannot clear CMCNT\n");
ret = -ETIMEDOUT;
goto err1;
sh_cmt_start_stop_ch(p, 0);
/* disable interrupts in CMT block */
- sh_cmt_write(p, CMCSR, 0);
+ sh_cmt_write_cmcsr(p, 0);
/* stop clock */
clk_disable(p->clk);
if (new_match > p->max_match_value)
new_match = p->max_match_value;
- sh_cmt_write(p, CMCOR, new_match);
+ sh_cmt_write_cmcor(p, new_match);
now = sh_cmt_get_counter(p, &has_wrapped);
if (has_wrapped && (new_match > p->match_value)) {
struct sh_cmt_priv *p = dev_id;
/* clear flags */
- sh_cmt_write(p, CMCSR, sh_cmt_read(p, CMCSR) & p->clear_bits);
+ sh_cmt_write_cmcsr(p, sh_cmt_read_cmcsr(p) & p->clear_bits);
/* update clock source counter to begin with if enabled
* the wrap flag should be cleared by the timer specific
unsigned long clockevent_rating,
unsigned long clocksource_rating)
{
- if (p->width == (sizeof(p->max_match_value) * 8))
- p->max_match_value = ~0;
- else
- p->max_match_value = (1 << p->width) - 1;
-
- p->match_value = p->max_match_value;
- raw_spin_lock_init(&p->lock);
-
if (clockevent_rating)
sh_cmt_register_clockevent(p, name, clockevent_rating);
goto err0;
}
- platform_set_drvdata(pdev, p);
-
res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&p->pdev->dev, "failed to get I/O memory\n");
goto err1;
}
+ p->read_control = sh_cmt_read16;
+ p->write_control = sh_cmt_write16;
+
if (resource_size(res) == 6) {
p->width = 16;
+ p->read_count = sh_cmt_read16;
+ p->write_count = sh_cmt_write16;
p->overflow_bit = 0x80;
p->clear_bits = ~0x80;
} else {
p->width = 32;
+ p->read_count = sh_cmt_read32;
+ p->write_count = sh_cmt_write32;
p->overflow_bit = 0x8000;
p->clear_bits = ~0xc000;
}
+ if (p->width == (sizeof(p->max_match_value) * 8))
+ p->max_match_value = ~0;
+ else
+ p->max_match_value = (1 << p->width) - 1;
+
+ p->match_value = p->max_match_value;
+ raw_spin_lock_init(&p->lock);
+
ret = sh_cmt_register(p, (char *)dev_name(&p->pdev->dev),
cfg->clockevent_rating,
cfg->clocksource_rating);
if (ret) {
dev_err(&p->pdev->dev, "registration failed\n");
- goto err1;
+ goto err2;
}
p->cs_enabled = false;
ret = setup_irq(irq, &p->irqaction);
if (ret) {
dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
- goto err1;
+ goto err2;
}
+ platform_set_drvdata(pdev, p);
+
return 0;
+err2:
+ clk_put(p->clk);
err1:
iounmap(p->mapbase);
ret = sh_cmt_setup(p, pdev);
if (ret) {
kfree(p);
- platform_set_drvdata(pdev, NULL);
pm_runtime_idle(&pdev->dev);
return ret;
}
}
early_platform_init("earlytimer", &sh_cmt_device_driver);
-module_init(sh_cmt_init);
+subsys_initcall(sh_cmt_init);
module_exit(sh_cmt_exit);
MODULE_AUTHOR("Magnus Damm");
}
early_platform_init("earlytimer", &sh_mtu2_device_driver);
-module_init(sh_mtu2_init);
+subsys_initcall(sh_mtu2_init);
module_exit(sh_mtu2_exit);
MODULE_AUTHOR("Magnus Damm");
}
early_platform_init("earlytimer", &sh_tmu_device_driver);
-module_init(sh_tmu_init);
+subsys_initcall(sh_tmu_init);
module_exit(sh_tmu_exit);
MODULE_AUTHOR("Magnus Damm");
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sunxi_timer.h>
-#include <linux/clk-provider.h>
+#include <linux/clk/sunxi.h>
#define TIMER_CTL_REG 0x00
#define TIMER_CTL_ENABLE (1 << 0)
if (irq <= 0)
panic("Can't parse IRQ");
- of_clk_init(NULL);
+ sunxi_init_clocks();
clk = of_clk_get(node, 0);
if (IS_ERR(clk))
BUG();
}
- clk = clk_get_sys("timer", NULL);
+ clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n");
rate = 12000000;
* rtc registers are used by read_persistent_clock, keep the rtc clock
* enabled
*/
- clk = clk_get_sys("rtc-tegra", NULL);
+ clk = of_clk_get(np, 0);
if (IS_ERR(clk))
pr_warn("Unable to get rtc-tegra clock\n");
else
policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
cpumask_copy(policy->cpus, perf->shared_cpu_map);
}
- cpumask_copy(policy->related_cpus, perf->shared_cpu_map);
#ifdef CONFIG_SMP
dmi_check_system(sw_any_bug_dmi_table);
if (check_amd_hwpstate_cpu(cpu) && !acpi_pstate_strict) {
cpumask_clear(policy->cpus);
cpumask_set_cpu(cpu, policy->cpus);
- cpumask_copy(policy->related_cpus, cpu_sibling_mask(cpu));
policy->shared_type = CPUFREQ_SHARED_TYPE_HW;
pr_info_once(PFX "overriding BIOS provided _PSD data\n");
}
static int cpu0_cpufreq_probe(struct platform_device *pdev)
{
- struct device_node *np;
+ struct device_node *np, *parent;
int ret;
- for_each_child_of_node(of_find_node_by_path("/cpus"), np) {
+ parent = of_find_node_by_path("/cpus");
+ if (!parent) {
+ pr_err("failed to find OF /cpus\n");
+ return -ENOENT;
+ }
+
+ for_each_child_of_node(parent, np) {
if (of_get_property(np, "operating-points", NULL))
break;
}
* published by the Free Software Foundation.
*/
-#ifndef _CPUFREQ_GOVERNER_H
-#define _CPUFREQ_GOVERNER_H
+#ifndef _CPUFREQ_GOVERNOR_H
+#define _CPUFREQ_GOVERNOR_H
#include <linux/cpufreq.h>
#include <linux/kobject.h>
unsigned int sampling_rate);
int cpufreq_governor_dbs(struct dbs_data *dbs_data,
struct cpufreq_policy *policy, unsigned int event);
-#endif /* _CPUFREQ_GOVERNER_H */
+#endif /* _CPUFREQ_GOVERNOR_H */
{
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
- if (!cpufreq_frequency_get_table(cpu))
+ if (!policy)
return;
- if (policy && !policy_is_shared(policy)) {
+ if (!cpufreq_frequency_get_table(cpu))
+ goto put_ref;
+
+ if (!policy_is_shared(policy)) {
pr_debug("%s: Free sysfs stat\n", __func__);
sysfs_remove_group(&policy->kobj, &stats_attr_group);
}
- if (policy)
- cpufreq_cpu_put(policy);
+
+put_ref:
+ cpufreq_cpu_put(policy);
}
static int cpufreq_stats_create_table(struct cpufreq_policy *policy,
static int intel_pstate_min_pstate(void)
{
u64 value;
- rdmsrl(0xCE, value);
+ rdmsrl(MSR_PLATFORM_INFO, value);
return (value >> 40) & 0xFF;
}
static int intel_pstate_max_pstate(void)
{
u64 value;
- rdmsrl(0xCE, value);
+ rdmsrl(MSR_PLATFORM_INFO, value);
return (value >> 8) & 0xFF;
}
{
u64 value;
int nont, ret;
- rdmsrl(0x1AD, value);
+ rdmsrl(MSR_NHM_TURBO_RATIO_LIMIT, value);
nont = intel_pstate_max_pstate();
ret = ((value) & 255);
if (ret <= nont)
sample->idletime_us * 100,
sample->duration_us);
core_pct = div64_u64(sample->aperf * 100, sample->mperf);
- sample->freq = cpu->pstate.turbo_pstate * core_pct * 1000;
+ sample->freq = cpu->pstate.max_pstate * core_pct * 1000;
sample->core_pct_busy = div_s64((sample->pstate_pct_busy * core_pct),
100);
static int __initdata no_load;
+static int intel_pstate_msrs_not_valid(void)
+{
+ /* Check that all the msr's we are using are valid. */
+ u64 aperf, mperf, tmp;
+
+ rdmsrl(MSR_IA32_APERF, aperf);
+ rdmsrl(MSR_IA32_MPERF, mperf);
+
+ if (!intel_pstate_min_pstate() ||
+ !intel_pstate_max_pstate() ||
+ !intel_pstate_turbo_pstate())
+ return -ENODEV;
+
+ rdmsrl(MSR_IA32_APERF, tmp);
+ if (!(tmp - aperf))
+ return -ENODEV;
+
+ rdmsrl(MSR_IA32_MPERF, tmp);
+ if (!(tmp - mperf))
+ return -ENODEV;
+
+ return 0;
+}
static int __init intel_pstate_init(void)
{
int cpu, rc = 0;
if (!id)
return -ENODEV;
+ if (intel_pstate_msrs_not_valid())
+ return -ENODEV;
+
pr_info("Intel P-state driver initializing.\n");
all_cpu_data = vmalloc(sizeof(void *) * num_possible_cpus());
};
static struct caam_alg_template driver_algs[] = {
- /*
- * single-pass ipsec_esp descriptor
- * authencesn(*,*) is also registered, although not present
- * explicitly here.
- */
+ /* single-pass ipsec_esp descriptor */
{
.name = "authenc(hmac(md5),cbc(aes))",
.driver_name = "authenc-hmac-md5-cbc-aes-caam",
for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
/* TODO: check if h/w supports alg */
struct caam_crypto_alg *t_alg;
- bool done = false;
-authencesn:
t_alg = caam_alg_alloc(ctrldev, &driver_algs[i]);
if (IS_ERR(t_alg)) {
err = PTR_ERR(t_alg);
dev_warn(ctrldev, "%s alg registration failed\n",
t_alg->crypto_alg.cra_driver_name);
kfree(t_alg);
- } else {
+ } else
list_add_tail(&t_alg->entry, &priv->alg_list);
- if (driver_algs[i].type == CRYPTO_ALG_TYPE_AEAD &&
- !memcmp(driver_algs[i].name, "authenc", 7) &&
- !done) {
- char *name;
-
- name = driver_algs[i].name;
- memmove(name + 10, name + 7, strlen(name) - 7);
- memcpy(name + 7, "esn", 3);
-
- name = driver_algs[i].driver_name;
- memmove(name + 10, name + 7, strlen(name) - 7);
- memcpy(name + 7, "esn", 3);
-
- done = true;
- goto authencesn;
- }
- }
}
if (!list_empty(&priv->alg_list))
dev_info(ctrldev, "%s algorithms registered in /proc/crypto\n",
#include <linux/types.h>
#include <linux/debugfs.h>
#include <linux/circ_buf.h>
-#include <linux/string.h>
#include <net/xfrm.h>
#include <crypto/algapi.h>
#include <linux/spinlock.h>
#include <linux/rtnetlink.h>
#include <linux/slab.h>
-#include <linux/string.h>
#include <crypto/algapi.h>
#include <crypto/aes.h>
};
static struct talitos_alg_template driver_algs[] = {
- /*
- * AEAD algorithms. These use a single-pass ipsec_esp descriptor.
- * authencesn(*,*) is also registered, although not present
- * explicitly here.
- */
+ /* AEAD algorithms. These use a single-pass ipsec_esp descriptor */
{ .type = CRYPTO_ALG_TYPE_AEAD,
.alg.crypto = {
.cra_name = "authenc(hmac(sha1),cbc(aes))",
if (hw_supports(dev, driver_algs[i].desc_hdr_template)) {
struct talitos_crypto_alg *t_alg;
char *name = NULL;
- bool authenc = false;
-authencesn:
t_alg = talitos_alg_alloc(dev, &driver_algs[i]);
if (IS_ERR(t_alg)) {
err = PTR_ERR(t_alg);
err = crypto_register_alg(
&t_alg->algt.alg.crypto);
name = t_alg->algt.alg.crypto.cra_driver_name;
- authenc = authenc ? !authenc :
- !(bool)memcmp(name, "authenc", 7);
break;
case CRYPTO_ALG_TYPE_AHASH:
err = crypto_register_ahash(
dev_err(dev, "%s alg registration failed\n",
name);
kfree(t_alg);
- } else {
+ } else
list_add_tail(&t_alg->entry, &priv->alg_list);
- if (authenc) {
- struct crypto_alg *alg =
- &driver_algs[i].alg.crypto;
-
- name = alg->cra_name;
- memmove(name + 10, name + 7,
- strlen(name) - 7);
- memcpy(name + 7, "esn", 3);
-
- name = alg->cra_driver_name;
- memmove(name + 10, name + 7,
- strlen(name) - 7);
- memcpy(name + 7, "esn", 3);
-
- goto authencesn;
- }
- }
}
}
if (!list_empty(&priv->alg_list))
config DW_DMAC
tristate "Synopsys DesignWare AHB DMA support"
+ depends on GENERIC_HARDIRQS
select DMA_ENGINE
default y if CPU_AT32AP7000
help
*maxburst = 0;
}
+static inline void convert_slave_id(struct dw_dma_chan *dwc)
+{
+ struct dw_dma *dw = to_dw_dma(dwc->chan.device);
+
+ dwc->dma_sconfig.slave_id -= dw->request_line_base;
+}
+
static int
set_runtime_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
{
convert_burst(&dwc->dma_sconfig.src_maxburst);
convert_burst(&dwc->dma_sconfig.dst_maxburst);
+ convert_slave_id(dwc);
return 0;
}
if (dma_spec->args_count != 3)
return NULL;
- fargs.req = be32_to_cpup(dma_spec->args+0);
- fargs.src = be32_to_cpup(dma_spec->args+1);
- fargs.dst = be32_to_cpup(dma_spec->args+2);
+ fargs.req = dma_spec->args[0];
+ fargs.src = dma_spec->args[1];
+ fargs.dst = dma_spec->args[2];
if (WARN_ON(fargs.req >= DW_DMA_MAX_NR_REQUESTS ||
fargs.src >= dw->nr_masters ||
static int dw_probe(struct platform_device *pdev)
{
+ const struct platform_device_id *match;
struct dw_dma_platform_data *pdata;
struct resource *io;
struct dw_dma *dw;
memcpy(dw->data_width, pdata->data_width, 4);
}
+ /* Get the base request line if set */
+ match = platform_get_device_id(pdev);
+ if (match)
+ dw->request_line_base = (unsigned int)match->driver_data;
+
/* Calculate all channel mask before DMA setup */
dw->all_chan_mask = (1 << nr_channels) - 1;
#endif
static const struct platform_device_id dw_dma_ids[] = {
- { "INTL9C60", 0 },
+ /* Name, Request Line Base */
+ { "INTL9C60", (kernel_ulong_t)16 },
{ }
};
/* hardware configuration */
unsigned char nr_masters;
unsigned char data_width[4];
+ unsigned int request_line_base;
struct dw_dma_chan chan[0];
};
edac_dbg(1, "MC node: %d, csrow: %d\n",
pvt->mc_node_id, i);
- if (row_dct0)
+ if (row_dct0) {
nr_pages = amd64_csrow_nr_pages(pvt, 0, i);
+ csrow->channels[0]->dimm->nr_pages = nr_pages;
+ }
/* K8 has only one DCT */
- if (boot_cpu_data.x86 != 0xf && row_dct1)
- nr_pages += amd64_csrow_nr_pages(pvt, 1, i);
+ if (boot_cpu_data.x86 != 0xf && row_dct1) {
+ int row_dct1_pages = amd64_csrow_nr_pages(pvt, 1, i);
+
+ csrow->channels[1]->dimm->nr_pages = row_dct1_pages;
+ nr_pages += row_dct1_pages;
+ }
mtype = amd64_determine_memory_type(pvt, i);
dimm = csrow->channels[j]->dimm;
dimm->mtype = mtype;
dimm->edac_mode = edac_mode;
- dimm->nr_pages = nr_pages;
}
- csrow->nr_pages = nr_pages;
}
return empty;
mci->pvt_info = pvt;
mci->pdev = &pvt->F2->dev;
- mci->csbased = 1;
setup_mci_misc_attrs(mci, fam_type);
edac_dimm_info_location(dimm, location, sizeof(location));
edac_dbg(4, "%s%i: %smapped as virtual row %d, chan %d\n",
- dimm->mci->mem_is_per_rank ? "rank" : "dimm",
+ dimm->mci->csbased ? "rank" : "dimm",
number, location, dimm->csrow, dimm->cschannel);
edac_dbg(4, " dimm = %p\n", dimm);
edac_dbg(4, " dimm->label = '%s'\n", dimm->label);
memcpy(mci->layers, layers, sizeof(*layer) * n_layers);
mci->nr_csrows = tot_csrows;
mci->num_cschannel = tot_channels;
- mci->mem_is_per_rank = per_rank;
+ mci->csbased = per_rank;
/*
* Alocate and fill the csrow/channels structs
* incrementing the compat API counters
*/
edac_dbg(4, "%s csrows map: (%d,%d)\n",
- mci->mem_is_per_rank ? "rank" : "dimm",
+ mci->csbased ? "rank" : "dimm",
dimm->csrow, dimm->cschannel);
if (row == -1)
row = dimm->csrow;
* and the per-dimm/per-rank one
*/
#define DEVICE_ATTR_LEGACY(_name, _mode, _show, _store) \
- struct device_attribute dev_attr_legacy_##_name = __ATTR(_name, _mode, _show, _store)
+ static struct device_attribute dev_attr_legacy_##_name = __ATTR(_name, _mode, _show, _store)
struct dev_ch_attribute {
struct device_attribute attr;
int i;
u32 nr_pages = 0;
- if (csrow->mci->csbased)
- return sprintf(data, "%u\n", PAGES_TO_MiB(csrow->nr_pages));
-
for (i = 0; i < csrow->nr_channels; i++)
nr_pages += csrow->channels[i]->dimm->nr_pages;
return sprintf(data, "%u\n", PAGES_TO_MiB(nr_pages));
device_initialize(&dimm->dev);
dimm->dev.parent = &mci->dev;
- if (mci->mem_is_per_rank)
+ if (mci->csbased)
dev_set_name(&dimm->dev, "rank%d", index);
else
dev_set_name(&dimm->dev, "dimm%d", index);
for (csrow_idx = 0; csrow_idx < mci->nr_csrows; csrow_idx++) {
struct csrow_info *csrow = mci->csrows[csrow_idx];
- if (csrow->mci->csbased) {
- total_pages += csrow->nr_pages;
- } else {
- for (j = 0; j < csrow->nr_channels; j++) {
- struct dimm_info *dimm = csrow->channels[j]->dimm;
+ for (j = 0; j < csrow->nr_channels; j++) {
+ struct dimm_info *dimm = csrow->channels[j]->dimm;
- total_pages += dimm->nr_pages;
- }
+ total_pages += dimm->nr_pages;
}
}
/* There is only *one* pci_eisa device per machine, right ? */
static struct eisa_root_device pci_eisa_root;
-static int __init pci_eisa_init(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int __init pci_eisa_init(struct pci_dev *pdev)
{
- int rc;
+ int rc, i;
+ struct resource *res, *bus_res = NULL;
if ((rc = pci_enable_device (pdev))) {
printk (KERN_ERR "pci_eisa : Could not enable device %s\n",
return rc;
}
+ /*
+ * The Intel 82375 PCI-EISA bridge is a subtractive-decode PCI
+ * device, so the resources available on EISA are the same as those
+ * available on the 82375 bus. This works the same as a PCI-PCI
+ * bridge in subtractive-decode mode (see pci_read_bridge_bases()).
+ * We assume other PCI-EISA bridges are similar.
+ *
+ * eisa_root_register() can only deal with a single io port resource,
+ * so we use the first valid io port resource.
+ */
+ pci_bus_for_each_resource(pdev->bus, res, i)
+ if (res && (res->flags & IORESOURCE_IO)) {
+ bus_res = res;
+ break;
+ }
+
+ if (!bus_res) {
+ dev_err(&pdev->dev, "No resources available\n");
+ return -1;
+ }
+
pci_eisa_root.dev = &pdev->dev;
- pci_eisa_root.res = pdev->bus->resource[0];
- pci_eisa_root.bus_base_addr = pdev->bus->resource[0]->start;
+ pci_eisa_root.res = bus_res;
+ pci_eisa_root.bus_base_addr = bus_res->start;
pci_eisa_root.slots = EISA_MAX_SLOTS;
pci_eisa_root.dma_mask = pdev->dma_mask;
dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root);
return 0;
}
-static struct pci_device_id pci_eisa_pci_tbl[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_BRIDGE_EISA << 8, 0xffff00, 0 },
- { 0, }
-};
+/*
+ * We have to call pci_eisa_init_early() before pnpacpi_init()/isapnp_init().
+ * Otherwise pnp resource will get enabled early and could prevent eisa
+ * to be initialized.
+ * Also need to make sure pci_eisa_init_early() is called after
+ * x86/pci_subsys_init().
+ * So need to use subsys_initcall_sync with it.
+ */
+static int __init pci_eisa_init_early(void)
+{
+ struct pci_dev *dev = NULL;
+ int ret;
-static struct pci_driver __refdata pci_eisa_driver = {
- .name = "pci_eisa",
- .id_table = pci_eisa_pci_tbl,
- .probe = pci_eisa_init,
-};
+ for_each_pci_dev(dev)
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_EISA) {
+ ret = pci_eisa_init(dev);
+ if (ret)
+ return ret;
+ }
-static int __init pci_eisa_init_module (void)
-{
- return pci_register_driver (&pci_eisa_driver);
+ return 0;
}
-
-device_initcall(pci_eisa_init_module);
-MODULE_DEVICE_TABLE(pci, pci_eisa_pci_tbl);
+subsys_initcall_sync(pci_eisa_init_early);
#define DEV_NAME "max77693-muic"
#define DELAY_MS_DEFAULT 20000 /* unit: millisecond */
+/*
+ * Default value of MAX77693 register to bring up MUIC device.
+ * If user don't set some initial value for MUIC device through platform data,
+ * extcon-max77693 driver use 'default_init_data' to bring up base operation
+ * of MAX77693 MUIC device.
+ */
+struct max77693_reg_data default_init_data[] = {
+ {
+ /* STATUS2 - [3]ChgDetRun */
+ .addr = MAX77693_MUIC_REG_STATUS2,
+ .data = STATUS2_CHGDETRUN_MASK,
+ }, {
+ /* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */
+ .addr = MAX77693_MUIC_REG_INTMASK1,
+ .data = INTMASK1_ADC1K_MASK
+ | INTMASK1_ADC_MASK,
+ }, {
+ /* INTMASK2 - Unmask [0]ChgTypM */
+ .addr = MAX77693_MUIC_REG_INTMASK2,
+ .data = INTMASK2_CHGTYP_MASK,
+ }, {
+ /* INTMASK3 - Mask all of interrupts */
+ .addr = MAX77693_MUIC_REG_INTMASK3,
+ .data = 0x0,
+ }, {
+ /* CDETCTRL2 */
+ .addr = MAX77693_MUIC_REG_CDETCTRL2,
+ .data = CDETCTRL2_VIDRMEN_MASK
+ | CDETCTRL2_DXOVPEN_MASK,
+ },
+};
+
enum max77693_muic_adc_debounce_time {
ADC_DEBOUNCE_TIME_5MS = 0,
ADC_DEBOUNCE_TIME_10MS,
{
struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
- struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
struct max77693_muic_info *info;
+ struct max77693_reg_data *init_data;
+ int num_init_data;
int delay_jiffies;
int ret;
int i;
goto err_irq;
}
- /* Initialize MUIC register by using platform data */
- for (i = 0 ; i < muic_pdata->num_init_data ; i++) {
- enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR;
+
+ /* Initialize MUIC register by using platform data or default data */
+ if (pdata->muic_data) {
+ init_data = pdata->muic_data->init_data;
+ num_init_data = pdata->muic_data->num_init_data;
+ } else {
+ init_data = default_init_data;
+ num_init_data = ARRAY_SIZE(default_init_data);
+ }
+
+ for (i = 0 ; i < num_init_data ; i++) {
+ enum max77693_irq_source irq_src
+ = MAX77693_IRQ_GROUP_NR;
max77693_write_reg(info->max77693->regmap_muic,
- muic_pdata->init_data[i].addr,
- muic_pdata->init_data[i].data);
+ init_data[i].addr,
+ init_data[i].data);
- switch (muic_pdata->init_data[i].addr) {
+ switch (init_data[i].addr) {
case MAX77693_MUIC_REG_INTMASK1:
irq_src = MUIC_INT1;
break;
if (irq_src < MAX77693_IRQ_GROUP_NR)
info->max77693->irq_masks_cur[irq_src]
- = muic_pdata->init_data[i].data;
+ = init_data[i].data;
}
- /*
- * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
- * h/w path of COMP2/COMN1 on CONTROL1 register.
- */
- if (muic_pdata->path_uart)
- info->path_uart = muic_pdata->path_uart;
- else
- info->path_uart = CONTROL1_SW_UART;
+ if (pdata->muic_data) {
+ struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
- if (muic_pdata->path_usb)
- info->path_usb = muic_pdata->path_usb;
- else
+ /*
+ * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+ * h/w path of COMP2/COMN1 on CONTROL1 register.
+ */
+ if (muic_pdata->path_uart)
+ info->path_uart = muic_pdata->path_uart;
+ else
+ info->path_uart = CONTROL1_SW_UART;
+
+ if (muic_pdata->path_usb)
+ info->path_usb = muic_pdata->path_usb;
+ else
+ info->path_usb = CONTROL1_SW_USB;
+
+ /*
+ * Default delay time for detecting cable state
+ * after certain time.
+ */
+ if (muic_pdata->detcable_delay_ms)
+ delay_jiffies =
+ msecs_to_jiffies(muic_pdata->detcable_delay_ms);
+ else
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ } else {
info->path_usb = CONTROL1_SW_USB;
+ info->path_uart = CONTROL1_SW_UART;
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ }
/* Set initial path for UART */
max77693_muic_set_path(info, info->path_uart, true);
* driver should notify cable state to upper layer.
*/
INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq);
- if (muic_pdata->detcable_delay_ms)
- delay_jiffies = msecs_to_jiffies(muic_pdata->detcable_delay_ms);
- else
- delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
schedule_delayed_work(&info->wq_detcable, delay_jiffies);
return ret;
goto err_irq;
}
- /* Initialize registers according to platform data */
if (pdata->muic_pdata) {
- struct max8997_muic_platform_data *mdata = info->muic_pdata;
-
- for (i = 0; i < mdata->num_init_data; i++) {
- max8997_write_reg(info->muic, mdata->init_data[i].addr,
- mdata->init_data[i].data);
+ struct max8997_muic_platform_data *muic_pdata
+ = pdata->muic_pdata;
+
+ /* Initialize registers according to platform data */
+ for (i = 0; i < muic_pdata->num_init_data; i++) {
+ max8997_write_reg(info->muic,
+ muic_pdata->init_data[i].addr,
+ muic_pdata->init_data[i].data);
}
- }
- /*
- * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
- * h/w path of COMP2/COMN1 on CONTROL1 register.
- */
- if (pdata->muic_pdata->path_uart)
- info->path_uart = pdata->muic_pdata->path_uart;
- else
- info->path_uart = CONTROL1_SW_UART;
+ /*
+ * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+ * h/w path of COMP2/COMN1 on CONTROL1 register.
+ */
+ if (muic_pdata->path_uart)
+ info->path_uart = muic_pdata->path_uart;
+ else
+ info->path_uart = CONTROL1_SW_UART;
- if (pdata->muic_pdata->path_usb)
- info->path_usb = pdata->muic_pdata->path_usb;
- else
+ if (muic_pdata->path_usb)
+ info->path_usb = muic_pdata->path_usb;
+ else
+ info->path_usb = CONTROL1_SW_USB;
+
+ /*
+ * Default delay time for detecting cable state
+ * after certain time.
+ */
+ if (muic_pdata->detcable_delay_ms)
+ delay_jiffies =
+ msecs_to_jiffies(muic_pdata->detcable_delay_ms);
+ else
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ } else {
+ info->path_uart = CONTROL1_SW_UART;
info->path_usb = CONTROL1_SW_USB;
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ }
/* Set initial path for UART */
max8997_muic_set_path(info, info->path_uart, true);
* driver should notify cable state to upper layer.
*/
INIT_DELAYED_WORK(&info->wq_detcable, max8997_muic_detect_cable_wq);
- if (pdata->muic_pdata->detcable_delay_ms)
- delay_jiffies = msecs_to_jiffies(pdata->muic_pdata->detcable_delay_ms);
- else
- delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
schedule_delayed_work(&info->wq_detcable, delay_jiffies);
return 0;
Subsequent efibootmgr releases may be found at:
<http://linux.dell.com/efibootmgr>
+config EFI_VARS_PSTORE
+ bool "Register efivars backend for pstore"
+ depends on EFI_VARS && PSTORE
+ default y
+ help
+ Say Y here to enable use efivars as a backend to pstore. This
+ will allow writing console messages, crash dumps, or anything
+ else supported by pstore to EFI variables.
+
+config EFI_VARS_PSTORE_DEFAULT_DISABLE
+ bool "Disable using efivars as a pstore backend by default"
+ depends on EFI_VARS_PSTORE
+ default n
+ help
+ Saying Y here will disable the use of efivars as a storage
+ backend for pstore by default. This setting can be overridden
+ using the efivars module's pstore_disable parameter.
+
config EFI_PCDP
bool "Console device selection via EFI PCDP or HCDP table"
depends on ACPI && EFI && IA64
*/
#define GUID_LEN 36
+static bool efivars_pstore_disable =
+ IS_ENABLED(CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE);
+
+module_param_named(pstore_disable, efivars_pstore_disable, bool, 0644);
+
/*
* The maximum size of VariableName + Data = 1024
* Therefore, it's reasonable to save that much
static void efivar_update_sysfs_entries(struct work_struct *);
static DECLARE_WORK(efivar_work, efivar_update_sysfs_entries);
+static bool efivar_wq_enabled = true;
/* Return the number of unicode characters in data */
static unsigned long
.create = efivarfs_create,
};
-static struct pstore_info efi_pstore_info;
-
-#ifdef CONFIG_PSTORE
+#ifdef CONFIG_EFI_VARS_PSTORE
static int efi_pstore_open(struct pstore_info *psi)
{
spin_unlock_irqrestore(&efivars->lock, flags);
- if (reason == KMSG_DUMP_OOPS)
+ if (reason == KMSG_DUMP_OOPS && efivar_wq_enabled)
schedule_work(&efivar_work);
*id = part;
return 0;
}
-#else
-static int efi_pstore_open(struct pstore_info *psi)
-{
- return 0;
-}
-
-static int efi_pstore_close(struct pstore_info *psi)
-{
- return 0;
-}
-
-static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, int *count,
- struct timespec *timespec,
- char **buf, struct pstore_info *psi)
-{
- return -1;
-}
-
-static int efi_pstore_write(enum pstore_type_id type,
- enum kmsg_dump_reason reason, u64 *id,
- unsigned int part, int count, size_t size,
- struct pstore_info *psi)
-{
- return 0;
-}
-
-static int efi_pstore_erase(enum pstore_type_id type, u64 id, int count,
- struct timespec time, struct pstore_info *psi)
-{
- return 0;
-}
-#endif
static struct pstore_info efi_pstore_info = {
.owner = THIS_MODULE,
.erase = efi_pstore_erase,
};
+static void efivar_pstore_register(struct efivars *efivars)
+{
+ efivars->efi_pstore_info = efi_pstore_info;
+ efivars->efi_pstore_info.buf = kmalloc(4096, GFP_KERNEL);
+ if (efivars->efi_pstore_info.buf) {
+ efivars->efi_pstore_info.bufsize = 1024;
+ efivars->efi_pstore_info.data = efivars;
+ spin_lock_init(&efivars->efi_pstore_info.buf_lock);
+ pstore_register(&efivars->efi_pstore_info);
+ }
+}
+#else
+static void efivar_pstore_register(struct efivars *efivars)
+{
+ return;
+}
+#endif
+
static ssize_t efivar_create(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t pos, size_t count)
return found;
}
+/*
+ * Returns the size of variable_name, in bytes, including the
+ * terminating NULL character, or variable_name_size if no NULL
+ * character is found among the first variable_name_size bytes.
+ */
+static unsigned long var_name_strnsize(efi_char16_t *variable_name,
+ unsigned long variable_name_size)
+{
+ unsigned long len;
+ efi_char16_t c;
+
+ /*
+ * The variable name is, by definition, a NULL-terminated
+ * string, so make absolutely sure that variable_name_size is
+ * the value we expect it to be. If not, return the real size.
+ */
+ for (len = 2; len <= variable_name_size; len += sizeof(c)) {
+ c = variable_name[(len / sizeof(c)) - 1];
+ if (!c)
+ break;
+ }
+
+ return min(len, variable_name_size);
+}
+
static void efivar_update_sysfs_entries(struct work_struct *work)
{
struct efivars *efivars = &__efivars;
if (!found) {
kfree(variable_name);
break;
- } else
+ } else {
+ variable_name_size = var_name_strnsize(variable_name,
+ variable_name_size);
efivar_create_sysfs_entry(efivars,
variable_name_size,
variable_name, &vendor);
+ }
}
}
}
EXPORT_SYMBOL_GPL(unregister_efivars);
+/*
+ * Print a warning when duplicate EFI variables are encountered and
+ * disable the sysfs workqueue since the firmware is buggy.
+ */
+static void dup_variable_bug(efi_char16_t *s16, efi_guid_t *vendor_guid,
+ unsigned long len16)
+{
+ size_t i, len8 = len16 / sizeof(efi_char16_t);
+ char *s8;
+
+ /*
+ * Disable the workqueue since the algorithm it uses for
+ * detecting new variables won't work with this buggy
+ * implementation of GetNextVariableName().
+ */
+ efivar_wq_enabled = false;
+
+ s8 = kzalloc(len8, GFP_KERNEL);
+ if (!s8)
+ return;
+
+ for (i = 0; i < len8; i++)
+ s8[i] = s16[i];
+
+ printk(KERN_WARNING "efivars: duplicate variable: %s-%pUl\n",
+ s8, vendor_guid);
+ kfree(s8);
+}
+
int register_efivars(struct efivars *efivars,
const struct efivar_operations *ops,
struct kobject *parent_kobj)
&vendor_guid);
switch (status) {
case EFI_SUCCESS:
+ variable_name_size = var_name_strnsize(variable_name,
+ variable_name_size);
+
+ /*
+ * Some firmware implementations return the
+ * same variable name on multiple calls to
+ * get_next_variable(). Terminate the loop
+ * immediately as there is no guarantee that
+ * we'll ever see a different variable name,
+ * and may end up looping here forever.
+ */
+ if (variable_is_present(variable_name, &vendor_guid)) {
+ dup_variable_bug(variable_name, &vendor_guid,
+ variable_name_size);
+ status = EFI_NOT_FOUND;
+ break;
+ }
+
efivar_create_sysfs_entry(efivars,
variable_name_size,
variable_name,
if (error)
unregister_efivars(efivars);
- efivars->efi_pstore_info = efi_pstore_info;
-
- efivars->efi_pstore_info.buf = kmalloc(4096, GFP_KERNEL);
- if (efivars->efi_pstore_info.buf) {
- efivars->efi_pstore_info.bufsize = 1024;
- efivars->efi_pstore_info.data = efivars;
- spin_lock_init(&efivars->efi_pstore_info.buf_lock);
- pstore_register(&efivars->efi_pstore_info);
- }
+ if (!efivars_pstore_disable)
+ efivar_pstore_register(efivars);
register_filesystem(&efivarfs_type);
blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
LCD port.
-config GPIO_VT8500
- bool "VIA/Wondermedia SoC GPIO Support"
- depends on ARCH_VT8500
- help
- Say yes here to support the VT8500/WM8505/WM8650 GPIO controller.
-
config GPIO_XILINX
bool "Xilinx GPIO support"
depends on PPC_OF || MICROBLAZE
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
-obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
+obj-$(CONFIG_PLAT_SAMSUNG_SINGLE) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o
obj-$(CONFIG_GPIO_VIPERBOARD) += gpio-viperboard.o
obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o
-obj-$(CONFIG_GPIO_VT8500) += gpio-vt8500.o
obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o
obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o
obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
* If it can't be trusted, assume that the pin can be used as a GPIO.
*/
if (ichx_priv.desc->use_sel_ignore[nr / 32] & (1 << (nr & 0x1f)))
- return 1;
+ return 0;
return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV;
}
#include <linux/io.h>
#include <linux/of_irq.h>
#include <linux/of_device.h>
+#include <linux/clk.h>
#include <linux/pinctrl/consumer.h>
/*
struct resource *res;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
+ struct clk *clk;
unsigned int ngpios;
int soc_variant;
int i, cpu, id;
return id;
}
+ clk = devm_clk_get(&pdev->dev, NULL);
+ /* Not all SoCs require a clock.*/
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+
mvchip->soc_variant = soc_variant;
mvchip->chip.label = dev_name(&pdev->dev);
mvchip->chip.dev = &pdev->dev;
#ifdef CONFIG_PLAT_S3C24XX
static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
{
- if (offset < 4)
- return IRQ_EINT0 + offset;
+ if (offset < 4) {
+ if (soc_is_s3c2412())
+ return IRQ_EINT0_2412 + offset;
+ else
+ return IRQ_EINT0 + offset;
+ }
if (offset < 8)
return IRQ_EINT4 + offset - 4;
static const struct of_device_id exynos_pinctrl_ids[] = {
{ .compatible = "samsung,exynos4210-pinctrl", },
{ .compatible = "samsung,exynos4x12-pinctrl", },
+ { .compatible = "samsung,exynos5250-pinctrl", },
{ .compatible = "samsung,exynos5440-pinctrl", },
};
for_each_matching_node(pctrl_np, exynos_pinctrl_ids)
.xlate = irq_domain_xlate_twocell,
};
-static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
+static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio,
+ struct device_node *np)
{
- int base = stmpe_gpio->irq_base;
+ int base = 0;
- stmpe_gpio->domain = irq_domain_add_simple(NULL,
+ if (!np)
+ base = stmpe_gpio->irq_base;
+
+ stmpe_gpio->domain = irq_domain_add_simple(np,
stmpe_gpio->chip.ngpio, base,
&stmpe_gpio_irq_simple_ops, stmpe_gpio);
if (!stmpe_gpio->domain) {
stmpe_gpio->chip = template_chip;
stmpe_gpio->chip.ngpio = stmpe->num_gpios;
stmpe_gpio->chip.dev = &pdev->dev;
+#ifdef CONFIG_OF
+ stmpe_gpio->chip.of_node = np;
+#endif
stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
if (pdata)
goto out_free;
if (irq >= 0) {
- ret = stmpe_gpio_irq_init(stmpe_gpio);
+ ret = stmpe_gpio_irq_init(stmpe_gpio, np);
if (ret)
goto out_disable;
u32 oe[4];
u32 int_enb[4];
u32 int_lvl[4];
+ u32 wake_enb[4];
#endif
};
bank->oe[p] = tegra_gpio_readl(GPIO_OE(gpio));
bank->int_enb[p] = tegra_gpio_readl(GPIO_INT_ENB(gpio));
bank->int_lvl[p] = tegra_gpio_readl(GPIO_INT_LVL(gpio));
+
+ /* Enable gpio irq for wake up source */
+ tegra_gpio_writel(bank->wake_enb[p],
+ GPIO_INT_ENB(gpio));
}
}
local_irq_restore(flags);
return 0;
}
-static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable)
+static int tegra_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
{
struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ int gpio = d->hwirq;
+ u32 port, bit, mask;
+
+ port = GPIO_PORT(gpio);
+ bit = GPIO_BIT(gpio);
+ mask = BIT(bit);
+
+ if (enable)
+ bank->wake_enb[port] |= mask;
+ else
+ bank->wake_enb[port] &= ~mask;
+
return irq_set_irq_wake(bank->irq, enable);
}
#endif
.irq_unmask = tegra_gpio_irq_unmask,
.irq_set_type = tegra_gpio_irq_set_type,
#ifdef CONFIG_PM_SLEEP
- .irq_set_wake = tegra_gpio_wake_enable,
+ .irq_set_wake = tegra_gpio_irq_set_wake,
#endif
};
+++ /dev/null
-/* drivers/gpio/gpio-vt8500.c
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- * Based on arch/arm/mach-vt8500/gpio.c:
- * - Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/bitops.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_device.h>
-
-/*
- We handle GPIOs by bank, each bank containing up to 32 GPIOs covered
- by one set of registers (although not all may be valid).
-
- Because different SoC's have different register offsets, we pass the
- register offsets as data in vt8500_gpio_dt_ids[].
-
- A value of NO_REG is used to indicate that this register is not
- supported. Only used for ->en at the moment.
-*/
-
-#define NO_REG 0xFFFF
-
-/*
- * struct vt8500_gpio_bank_regoffsets
- * @en: offset to enable register of the bank
- * @dir: offset to direction register of the bank
- * @data_out: offset to the data out register of the bank
- * @data_in: offset to the data in register of the bank
- * @ngpio: highest valid pin in this bank
- */
-
-struct vt8500_gpio_bank_regoffsets {
- unsigned int en;
- unsigned int dir;
- unsigned int data_out;
- unsigned int data_in;
- unsigned char ngpio;
-};
-
-struct vt8500_gpio_data {
- unsigned int num_banks;
- struct vt8500_gpio_bank_regoffsets banks[];
-};
-
-#define VT8500_BANK(__en, __dir, __out, __in, __ngpio) \
-{ \
- .en = __en, \
- .dir = __dir, \
- .data_out = __out, \
- .data_in = __in, \
- .ngpio = __ngpio, \
-}
-
-static struct vt8500_gpio_data vt8500_data = {
- .num_banks = 7,
- .banks = {
- VT8500_BANK(NO_REG, 0x3C, 0x5C, 0x7C, 9),
- VT8500_BANK(0x00, 0x20, 0x40, 0x60, 26),
- VT8500_BANK(0x04, 0x24, 0x44, 0x64, 28),
- VT8500_BANK(0x08, 0x28, 0x48, 0x68, 31),
- VT8500_BANK(0x0C, 0x2C, 0x4C, 0x6C, 19),
- VT8500_BANK(0x10, 0x30, 0x50, 0x70, 19),
- VT8500_BANK(0x14, 0x34, 0x54, 0x74, 23),
- },
-};
-
-static struct vt8500_gpio_data wm8505_data = {
- .num_banks = 10,
- .banks = {
- VT8500_BANK(0x64, 0x8C, 0xB4, 0xDC, 22),
- VT8500_BANK(0x40, 0x68, 0x90, 0xB8, 8),
- VT8500_BANK(0x44, 0x6C, 0x94, 0xBC, 32),
- VT8500_BANK(0x48, 0x70, 0x98, 0xC0, 6),
- VT8500_BANK(0x4C, 0x74, 0x9C, 0xC4, 16),
- VT8500_BANK(0x50, 0x78, 0xA0, 0xC8, 25),
- VT8500_BANK(0x54, 0x7C, 0xA4, 0xCC, 5),
- VT8500_BANK(0x58, 0x80, 0xA8, 0xD0, 5),
- VT8500_BANK(0x5C, 0x84, 0xAC, 0xD4, 12),
- VT8500_BANK(0x60, 0x88, 0xB0, 0xD8, 16),
- VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6),
- },
-};
-
-/*
- * No information about which bits are valid so we just make
- * them all available until its figured out.
- */
-static struct vt8500_gpio_data wm8650_data = {
- .num_banks = 9,
- .banks = {
- VT8500_BANK(0x40, 0x80, 0xC0, 0x00, 32),
- VT8500_BANK(0x44, 0x84, 0xC4, 0x04, 32),
- VT8500_BANK(0x48, 0x88, 0xC8, 0x08, 32),
- VT8500_BANK(0x4C, 0x8C, 0xCC, 0x0C, 32),
- VT8500_BANK(0x50, 0x90, 0xD0, 0x10, 32),
- VT8500_BANK(0x54, 0x94, 0xD4, 0x14, 32),
- VT8500_BANK(0x58, 0x98, 0xD8, 0x18, 32),
- VT8500_BANK(0x5C, 0x9C, 0xDC, 0x1C, 32),
- VT8500_BANK(0x7C, 0xBC, 0xFC, 0x3C, 32),
- VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6),
- },
-};
-
-struct vt8500_gpio_chip {
- struct gpio_chip chip;
-
- const struct vt8500_gpio_bank_regoffsets *regs;
- void __iomem *base;
-};
-
-struct vt8500_data {
- struct vt8500_gpio_chip *chip;
- void __iomem *iobase;
- int num_banks;
-};
-
-
-#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
-
-static int vt8500_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- u32 val;
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- if (vt8500_chip->regs->en == NO_REG)
- return 0;
-
- val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en);
- val |= BIT(offset);
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en);
-
- return 0;
-}
-
-static void vt8500_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
- u32 val;
-
- if (vt8500_chip->regs->en == NO_REG)
- return;
-
- val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en);
- val &= ~BIT(offset);
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en);
-}
-
-static int vt8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir);
- val &= ~BIT(offset);
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir);
-
- return 0;
-}
-
-static int vt8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir);
- val |= BIT(offset);
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir);
-
- if (value) {
- val = readl_relaxed(vt8500_chip->base +
- vt8500_chip->regs->data_out);
- val |= BIT(offset);
- writel_relaxed(val, vt8500_chip->base +
- vt8500_chip->regs->data_out);
- }
- return 0;
-}
-
-static int vt8500_gpio_get_value(struct gpio_chip *chip, unsigned offset)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- return (readl_relaxed(vt8500_chip->base + vt8500_chip->regs->data_in) >>
- offset) & 1;
-}
-
-static void vt8500_gpio_set_value(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- u32 val = readl_relaxed(vt8500_chip->base +
- vt8500_chip->regs->data_out);
- if (value)
- val |= BIT(offset);
- else
- val &= ~BIT(offset);
-
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->data_out);
-}
-
-static int vt8500_of_xlate(struct gpio_chip *gc,
- const struct of_phandle_args *gpiospec, u32 *flags)
-{
- /* bank if specificed in gpiospec->args[0] */
- if (flags)
- *flags = gpiospec->args[2];
-
- return gpiospec->args[1];
-}
-
-static int vt8500_add_chips(struct platform_device *pdev, void __iomem *base,
- const struct vt8500_gpio_data *data)
-{
- struct vt8500_data *priv;
- struct vt8500_gpio_chip *vtchip;
- struct gpio_chip *chip;
- int i;
- int pin_cnt = 0;
-
- priv = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_data), GFP_KERNEL);
- if (!priv) {
- dev_err(&pdev->dev, "failed to allocate memory\n");
- return -ENOMEM;
- }
-
- priv->chip = devm_kzalloc(&pdev->dev,
- sizeof(struct vt8500_gpio_chip) * data->num_banks,
- GFP_KERNEL);
- if (!priv->chip) {
- dev_err(&pdev->dev, "failed to allocate chip memory\n");
- return -ENOMEM;
- }
-
- priv->iobase = base;
- priv->num_banks = data->num_banks;
- platform_set_drvdata(pdev, priv);
-
- vtchip = priv->chip;
-
- for (i = 0; i < data->num_banks; i++) {
- vtchip[i].base = base;
- vtchip[i].regs = &data->banks[i];
-
- chip = &vtchip[i].chip;
-
- chip->of_xlate = vt8500_of_xlate;
- chip->of_gpio_n_cells = 3;
- chip->of_node = pdev->dev.of_node;
-
- chip->request = vt8500_gpio_request;
- chip->free = vt8500_gpio_free;
- chip->direction_input = vt8500_gpio_direction_input;
- chip->direction_output = vt8500_gpio_direction_output;
- chip->get = vt8500_gpio_get_value;
- chip->set = vt8500_gpio_set_value;
- chip->can_sleep = 0;
- chip->base = pin_cnt;
- chip->ngpio = data->banks[i].ngpio;
-
- pin_cnt += data->banks[i].ngpio;
-
- gpiochip_add(chip);
- }
- return 0;
-}
-
-static struct of_device_id vt8500_gpio_dt_ids[] = {
- { .compatible = "via,vt8500-gpio", .data = &vt8500_data, },
- { .compatible = "wm,wm8505-gpio", .data = &wm8505_data, },
- { .compatible = "wm,wm8650-gpio", .data = &wm8650_data, },
- { /* Sentinel */ },
-};
-
-static int vt8500_gpio_probe(struct platform_device *pdev)
-{
- int ret;
- void __iomem *gpio_base;
- struct resource *res;
- const struct of_device_id *of_id =
- of_match_device(vt8500_gpio_dt_ids, &pdev->dev);
-
- if (!of_id) {
- dev_err(&pdev->dev, "No matching driver data\n");
- return -ENODEV;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "Unable to get IO resource\n");
- return -ENODEV;
- }
-
- gpio_base = devm_request_and_ioremap(&pdev->dev, res);
- if (!gpio_base) {
- dev_err(&pdev->dev, "Unable to map GPIO registers\n");
- return -ENOMEM;
- }
-
- ret = vt8500_add_chips(pdev, gpio_base, of_id->data);
-
- return ret;
-}
-
-static int vt8500_gpio_remove(struct platform_device *pdev)
-{
- int i;
- int ret;
- struct vt8500_data *priv = platform_get_drvdata(pdev);
- struct vt8500_gpio_chip *vtchip = priv->chip;
-
- for (i = 0; i < priv->num_banks; i++) {
- ret = gpiochip_remove(&vtchip[i].chip);
- if (ret)
- dev_warn(&pdev->dev, "gpiochip_remove returned %d\n",
- ret);
- }
-
- return 0;
-}
-
-static struct platform_driver vt8500_gpio_driver = {
- .probe = vt8500_gpio_probe,
- .remove = vt8500_gpio_remove,
- .driver = {
- .name = "vt8500-gpio",
- .owner = THIS_MODULE,
- .of_match_table = vt8500_gpio_dt_ids,
- },
-};
-
-module_platform_driver(vt8500_gpio_driver);
-
-MODULE_DESCRIPTION("VT8500 GPIO Driver");
-MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
-MODULE_LICENSE("GPL v2");
-MODULE_DEVICE_TABLE(of, vt8500_gpio_dt_ids);
if (!np)
return;
- do {
+ for (;; index++) {
ret = of_parse_phandle_with_args(np, "gpio-ranges",
"#gpio-range-cells", index, &pinspec);
if (ret)
if (ret)
break;
-
- } while (index++);
+ }
}
#else
fb = dev->mode_config.funcs->fb_create(dev, file_priv, &r);
if (IS_ERR(fb)) {
DRM_DEBUG_KMS("could not create framebuffer\n");
- drm_modeset_unlock_all(dev);
return PTR_ERR(fb);
}
fb = dev->mode_config.funcs->fb_create(dev, file_priv, r);
if (IS_ERR(fb)) {
DRM_DEBUG_KMS("could not create framebuffer\n");
- drm_modeset_unlock_all(dev);
return PTR_ERR(fb);
}
unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo;
unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo;
unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo;
- unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+ unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 2 | pt->vsync_offset_pulse_width_lo >> 4;
unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf);
/* ignore tiny modes */
}
mode->type = DRM_MODE_TYPE_DRIVER;
+ mode->vrefresh = drm_mode_vrefresh(mode);
drm_mode_set_name(mode);
return mode;
int retcode = 0;
int need_setup = 0;
struct address_space *old_mapping;
+ struct address_space *old_imapping;
minor = idr_find(&drm_minors_idr, minor_id);
if (!minor)
if (!dev->open_count++)
need_setup = 1;
mutex_lock(&dev->struct_mutex);
+ old_imapping = inode->i_mapping;
old_mapping = dev->dev_mapping;
if (old_mapping == NULL)
dev->dev_mapping = &inode->i_data;
err_undo:
mutex_lock(&dev->struct_mutex);
- filp->f_mapping = old_mapping;
- inode->i_mapping = old_mapping;
+ filp->f_mapping = old_imapping;
+ inode->i_mapping = old_imapping;
iput(container_of(dev->dev_mapping, struct inode, i_data));
dev->dev_mapping = old_mapping;
mutex_unlock(&dev->struct_mutex);
/* position control register for hardware window 0, 2 ~ 4.*/
#define VIDOSD_A(win) (VIDOSD_BASE + 0x00 + (win) * 16)
#define VIDOSD_B(win) (VIDOSD_BASE + 0x04 + (win) * 16)
-/* size control register for hardware window 0. */
-#define VIDOSD_C_SIZE_W0 (VIDOSD_BASE + 0x08)
-/* alpha control register for hardware window 1 ~ 4. */
-#define VIDOSD_C(win) (VIDOSD_BASE + 0x18 + (win) * 16)
-/* size control register for hardware window 1 ~ 4. */
+/*
+ * size control register for hardware windows 0 and alpha control register
+ * for hardware windows 1 ~ 4
+ */
+#define VIDOSD_C(win) (VIDOSD_BASE + 0x08 + (win) * 16)
+/* size control register for hardware windows 1 ~ 2. */
#define VIDOSD_D(win) (VIDOSD_BASE + 0x0C + (win) * 16)
#define VIDWx_BUF_START(win, buf) (VIDW_BUF_START(buf) + (win) * 8)
#define VIDWx_BUF_SIZE(win, buf) (VIDW_BUF_SIZE(buf) + (win) * 4)
/* color key control register for hardware window 1 ~ 4. */
-#define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + (x * 8))
+#define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + ((x - 1) * 8))
/* color key value register for hardware window 1 ~ 4. */
-#define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + (x * 8))
+#define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + ((x - 1) * 8))
/* FIMD has totally five hardware windows. */
#define WINDOWS_NR 5
#ifdef CONFIG_OF
static const struct of_device_id fimd_driver_dt_match[] = {
- { .compatible = "samsung,exynos4-fimd",
+ { .compatible = "samsung,exynos4210-fimd",
.data = &exynos4_fimd_driver_data },
- { .compatible = "samsung,exynos5-fimd",
+ { .compatible = "samsung,exynos5250-fimd",
.data = &exynos5_fimd_driver_data },
{},
};
if (win != 3 && win != 4) {
u32 offset = VIDOSD_D(win);
if (win == 0)
- offset = VIDOSD_C_SIZE_W0;
+ offset = VIDOSD_C(win);
val = win_data->ovl_width * win_data->ovl_height;
writel(val, ctx->regs + offset);
/* registers for base address */
#define G2D_SRC_BASE_ADDR 0x0304
+#define G2D_SRC_COLOR_MODE 0x030C
+#define G2D_SRC_LEFT_TOP 0x0310
+#define G2D_SRC_RIGHT_BOTTOM 0x0314
#define G2D_SRC_PLANE2_BASE_ADDR 0x0318
#define G2D_DST_BASE_ADDR 0x0404
+#define G2D_DST_COLOR_MODE 0x040C
+#define G2D_DST_LEFT_TOP 0x0410
+#define G2D_DST_RIGHT_BOTTOM 0x0414
#define G2D_DST_PLANE2_BASE_ADDR 0x0418
#define G2D_PAT_BASE_ADDR 0x0500
#define G2D_MSK_BASE_ADDR 0x0520
#define G2D_DMA_LIST_DONE_COUNT_OFFSET 17
/* G2D_DMA_HOLD_CMD */
-#define G2D_USET_HOLD (1 << 2)
+#define G2D_USER_HOLD (1 << 2)
#define G2D_LIST_HOLD (1 << 1)
#define G2D_BITBLT_HOLD (1 << 0)
#define G2D_START_NHOLT (1 << 1)
#define G2D_START_BITBLT (1 << 0)
+/* buffer color format */
+#define G2D_FMT_XRGB8888 0
+#define G2D_FMT_ARGB8888 1
+#define G2D_FMT_RGB565 2
+#define G2D_FMT_XRGB1555 3
+#define G2D_FMT_ARGB1555 4
+#define G2D_FMT_XRGB4444 5
+#define G2D_FMT_ARGB4444 6
+#define G2D_FMT_PACKED_RGB888 7
+#define G2D_FMT_A8 11
+#define G2D_FMT_L8 12
+
+/* buffer valid length */
+#define G2D_LEN_MIN 1
+#define G2D_LEN_MAX 8000
+
#define G2D_CMDLIST_SIZE (PAGE_SIZE / 4)
#define G2D_CMDLIST_NUM 64
#define G2D_CMDLIST_POOL_SIZE (G2D_CMDLIST_SIZE * G2D_CMDLIST_NUM)
#define G2D_CMDLIST_DATA_NUM (G2D_CMDLIST_SIZE / sizeof(u32) - 2)
-#define MAX_BUF_ADDR_NR 6
-
/* maximum buffer pool size of userptr is 64MB as default */
#define MAX_POOL (64 * 1024 * 1024)
BUF_TYPE_USERPTR,
};
+enum g2d_reg_type {
+ REG_TYPE_NONE = -1,
+ REG_TYPE_SRC,
+ REG_TYPE_SRC_PLANE2,
+ REG_TYPE_DST,
+ REG_TYPE_DST_PLANE2,
+ REG_TYPE_PAT,
+ REG_TYPE_MSK,
+ MAX_REG_TYPE_NR
+};
+
/* cmdlist data structure */
struct g2d_cmdlist {
u32 head;
u32 last; /* last data offset */
};
+/*
+ * A structure of buffer description
+ *
+ * @format: color format
+ * @left_x: the x coordinates of left top corner
+ * @top_y: the y coordinates of left top corner
+ * @right_x: the x coordinates of right bottom corner
+ * @bottom_y: the y coordinates of right bottom corner
+ *
+ */
+struct g2d_buf_desc {
+ unsigned int format;
+ unsigned int left_x;
+ unsigned int top_y;
+ unsigned int right_x;
+ unsigned int bottom_y;
+};
+
+/*
+ * A structure of buffer information
+ *
+ * @map_nr: manages the number of mapped buffers
+ * @reg_types: stores regitster type in the order of requested command
+ * @handles: stores buffer handle in its reg_type position
+ * @types: stores buffer type in its reg_type position
+ * @descs: stores buffer description in its reg_type position
+ *
+ */
+struct g2d_buf_info {
+ unsigned int map_nr;
+ enum g2d_reg_type reg_types[MAX_REG_TYPE_NR];
+ unsigned long handles[MAX_REG_TYPE_NR];
+ unsigned int types[MAX_REG_TYPE_NR];
+ struct g2d_buf_desc descs[MAX_REG_TYPE_NR];
+};
+
struct drm_exynos_pending_g2d_event {
struct drm_pending_event base;
struct drm_exynos_g2d_event event;
bool in_pool;
bool out_of_list;
};
-
struct g2d_cmdlist_node {
struct list_head list;
struct g2d_cmdlist *cmdlist;
- unsigned int map_nr;
- unsigned long handles[MAX_BUF_ADDR_NR];
- unsigned int obj_type[MAX_BUF_ADDR_NR];
dma_addr_t dma_addr;
+ struct g2d_buf_info buf_info;
struct drm_exynos_pending_g2d_event *event;
};
struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
int nr;
int ret;
+ struct g2d_buf_info *buf_info;
init_dma_attrs(&g2d->cmdlist_dma_attrs);
dma_set_attr(DMA_ATTR_WRITE_COMBINE, &g2d->cmdlist_dma_attrs);
}
for (nr = 0; nr < G2D_CMDLIST_NUM; nr++) {
+ unsigned int i;
+
node[nr].cmdlist =
g2d->cmdlist_pool_virt + nr * G2D_CMDLIST_SIZE;
node[nr].dma_addr =
g2d->cmdlist_pool + nr * G2D_CMDLIST_SIZE;
+ buf_info = &node[nr].buf_info;
+ for (i = 0; i < MAX_REG_TYPE_NR; i++)
+ buf_info->reg_types[i] = REG_TYPE_NONE;
+
list_add_tail(&node[nr].list, &g2d->free_cmdlist);
}
DMA_BIDIRECTIONAL);
if (ret < 0) {
DRM_ERROR("failed to map sgt with dma region.\n");
- goto err_free_sgt;
+ goto err_sg_free_table;
}
g2d_userptr->dma_addr = sgt->sgl[0].dma_address;
return &g2d_userptr->dma_addr;
-err_free_sgt:
+err_sg_free_table:
sg_free_table(sgt);
+
+err_free_sgt:
kfree(sgt);
sgt = NULL;
g2d->current_pool = 0;
}
+static enum g2d_reg_type g2d_get_reg_type(int reg_offset)
+{
+ enum g2d_reg_type reg_type;
+
+ switch (reg_offset) {
+ case G2D_SRC_BASE_ADDR:
+ case G2D_SRC_COLOR_MODE:
+ case G2D_SRC_LEFT_TOP:
+ case G2D_SRC_RIGHT_BOTTOM:
+ reg_type = REG_TYPE_SRC;
+ break;
+ case G2D_SRC_PLANE2_BASE_ADDR:
+ reg_type = REG_TYPE_SRC_PLANE2;
+ break;
+ case G2D_DST_BASE_ADDR:
+ case G2D_DST_COLOR_MODE:
+ case G2D_DST_LEFT_TOP:
+ case G2D_DST_RIGHT_BOTTOM:
+ reg_type = REG_TYPE_DST;
+ break;
+ case G2D_DST_PLANE2_BASE_ADDR:
+ reg_type = REG_TYPE_DST_PLANE2;
+ break;
+ case G2D_PAT_BASE_ADDR:
+ reg_type = REG_TYPE_PAT;
+ break;
+ case G2D_MSK_BASE_ADDR:
+ reg_type = REG_TYPE_MSK;
+ break;
+ default:
+ reg_type = REG_TYPE_NONE;
+ DRM_ERROR("Unknown register offset![%d]\n", reg_offset);
+ break;
+ };
+
+ return reg_type;
+}
+
+static unsigned long g2d_get_buf_bpp(unsigned int format)
+{
+ unsigned long bpp;
+
+ switch (format) {
+ case G2D_FMT_XRGB8888:
+ case G2D_FMT_ARGB8888:
+ bpp = 4;
+ break;
+ case G2D_FMT_RGB565:
+ case G2D_FMT_XRGB1555:
+ case G2D_FMT_ARGB1555:
+ case G2D_FMT_XRGB4444:
+ case G2D_FMT_ARGB4444:
+ bpp = 2;
+ break;
+ case G2D_FMT_PACKED_RGB888:
+ bpp = 3;
+ break;
+ default:
+ bpp = 1;
+ break;
+ }
+
+ return bpp;
+}
+
+static bool g2d_check_buf_desc_is_valid(struct g2d_buf_desc *buf_desc,
+ enum g2d_reg_type reg_type,
+ unsigned long size)
+{
+ unsigned int width, height;
+ unsigned long area;
+
+ /*
+ * check source and destination buffers only.
+ * so the others are always valid.
+ */
+ if (reg_type != REG_TYPE_SRC && reg_type != REG_TYPE_DST)
+ return true;
+
+ width = buf_desc->right_x - buf_desc->left_x;
+ if (width < G2D_LEN_MIN || width > G2D_LEN_MAX) {
+ DRM_ERROR("width[%u] is out of range!\n", width);
+ return false;
+ }
+
+ height = buf_desc->bottom_y - buf_desc->top_y;
+ if (height < G2D_LEN_MIN || height > G2D_LEN_MAX) {
+ DRM_ERROR("height[%u] is out of range!\n", height);
+ return false;
+ }
+
+ area = (unsigned long)width * (unsigned long)height *
+ g2d_get_buf_bpp(buf_desc->format);
+ if (area > size) {
+ DRM_ERROR("area[%lu] is out of range[%lu]!\n", area, size);
+ return false;
+ }
+
+ return true;
+}
+
static int g2d_map_cmdlist_gem(struct g2d_data *g2d,
struct g2d_cmdlist_node *node,
struct drm_device *drm_dev,
struct drm_file *file)
{
struct g2d_cmdlist *cmdlist = node->cmdlist;
+ struct g2d_buf_info *buf_info = &node->buf_info;
int offset;
+ int ret;
int i;
- for (i = 0; i < node->map_nr; i++) {
+ for (i = 0; i < buf_info->map_nr; i++) {
+ struct g2d_buf_desc *buf_desc;
+ enum g2d_reg_type reg_type;
+ int reg_pos;
unsigned long handle;
dma_addr_t *addr;
- offset = cmdlist->last - (i * 2 + 1);
- handle = cmdlist->data[offset];
+ reg_pos = cmdlist->last - 2 * (i + 1);
+
+ offset = cmdlist->data[reg_pos];
+ handle = cmdlist->data[reg_pos + 1];
+
+ reg_type = g2d_get_reg_type(offset);
+ if (reg_type == REG_TYPE_NONE) {
+ ret = -EFAULT;
+ goto err;
+ }
+
+ buf_desc = &buf_info->descs[reg_type];
+
+ if (buf_info->types[reg_type] == BUF_TYPE_GEM) {
+ unsigned long size;
+
+ size = exynos_drm_gem_get_size(drm_dev, handle, file);
+ if (!size) {
+ ret = -EFAULT;
+ goto err;
+ }
+
+ if (!g2d_check_buf_desc_is_valid(buf_desc, reg_type,
+ size)) {
+ ret = -EFAULT;
+ goto err;
+ }
- if (node->obj_type[i] == BUF_TYPE_GEM) {
addr = exynos_drm_gem_get_dma_addr(drm_dev, handle,
file);
if (IS_ERR(addr)) {
- node->map_nr = i;
- return -EFAULT;
+ ret = -EFAULT;
+ goto err;
}
} else {
struct drm_exynos_g2d_userptr g2d_userptr;
if (copy_from_user(&g2d_userptr, (void __user *)handle,
sizeof(struct drm_exynos_g2d_userptr))) {
- node->map_nr = i;
- return -EFAULT;
+ ret = -EFAULT;
+ goto err;
+ }
+
+ if (!g2d_check_buf_desc_is_valid(buf_desc, reg_type,
+ g2d_userptr.size)) {
+ ret = -EFAULT;
+ goto err;
}
addr = g2d_userptr_get_dma_addr(drm_dev,
file,
&handle);
if (IS_ERR(addr)) {
- node->map_nr = i;
- return -EFAULT;
+ ret = -EFAULT;
+ goto err;
}
}
- cmdlist->data[offset] = *addr;
- node->handles[i] = handle;
+ cmdlist->data[reg_pos + 1] = *addr;
+ buf_info->reg_types[i] = reg_type;
+ buf_info->handles[reg_type] = handle;
}
return 0;
+
+err:
+ buf_info->map_nr = i;
+ return ret;
}
static void g2d_unmap_cmdlist_gem(struct g2d_data *g2d,
struct drm_file *filp)
{
struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
+ struct g2d_buf_info *buf_info = &node->buf_info;
int i;
- for (i = 0; i < node->map_nr; i++) {
- unsigned long handle = node->handles[i];
+ for (i = 0; i < buf_info->map_nr; i++) {
+ struct g2d_buf_desc *buf_desc;
+ enum g2d_reg_type reg_type;
+ unsigned long handle;
+
+ reg_type = buf_info->reg_types[i];
+
+ buf_desc = &buf_info->descs[reg_type];
+ handle = buf_info->handles[reg_type];
- if (node->obj_type[i] == BUF_TYPE_GEM)
+ if (buf_info->types[reg_type] == BUF_TYPE_GEM)
exynos_drm_gem_put_dma_addr(subdrv->drm_dev, handle,
filp);
else
g2d_userptr_put_dma_addr(subdrv->drm_dev, handle,
false);
- node->handles[i] = 0;
+ buf_info->reg_types[i] = REG_TYPE_NONE;
+ buf_info->handles[reg_type] = 0;
+ buf_info->types[reg_type] = 0;
+ memset(buf_desc, 0x00, sizeof(*buf_desc));
}
- node->map_nr = 0;
+ buf_info->map_nr = 0;
}
static void g2d_dma_start(struct g2d_data *g2d,
pm_runtime_get_sync(g2d->dev);
clk_enable(g2d->gate_clk);
- /* interrupt enable */
- writel_relaxed(G2D_INTEN_ACF | G2D_INTEN_UCF | G2D_INTEN_GCF,
- g2d->regs + G2D_INTEN);
-
writel_relaxed(node->dma_addr, g2d->regs + G2D_DMA_SFR_BASE_ADDR);
writel_relaxed(G2D_DMA_START, g2d->regs + G2D_DMA_COMMAND);
}
struct g2d_data *g2d = container_of(work, struct g2d_data,
runqueue_work);
-
mutex_lock(&g2d->runqueue_mutex);
clk_disable(g2d->gate_clk);
pm_runtime_put_sync(g2d->dev);
int i;
for (i = 0; i < nr; i++) {
- index = cmdlist->last - 2 * (i + 1);
+ struct g2d_buf_info *buf_info = &node->buf_info;
+ struct g2d_buf_desc *buf_desc;
+ enum g2d_reg_type reg_type;
+ unsigned long value;
- if (for_addr) {
- /* check userptr buffer type. */
- reg_offset = (cmdlist->data[index] &
- ~0x7fffffff) >> 31;
- if (reg_offset) {
- node->obj_type[i] = BUF_TYPE_USERPTR;
- cmdlist->data[index] &= ~G2D_BUF_USERPTR;
- }
- }
+ index = cmdlist->last - 2 * (i + 1);
reg_offset = cmdlist->data[index] & ~0xfffff000;
-
if (reg_offset < G2D_VALID_START || reg_offset > G2D_VALID_END)
goto err;
if (reg_offset % 4)
if (!for_addr)
goto err;
- if (node->obj_type[i] != BUF_TYPE_USERPTR)
- node->obj_type[i] = BUF_TYPE_GEM;
+ reg_type = g2d_get_reg_type(reg_offset);
+ if (reg_type == REG_TYPE_NONE)
+ goto err;
+
+ /* check userptr buffer type. */
+ if ((cmdlist->data[index] & ~0x7fffffff) >> 31) {
+ buf_info->types[reg_type] = BUF_TYPE_USERPTR;
+ cmdlist->data[index] &= ~G2D_BUF_USERPTR;
+ } else
+ buf_info->types[reg_type] = BUF_TYPE_GEM;
+ break;
+ case G2D_SRC_COLOR_MODE:
+ case G2D_DST_COLOR_MODE:
+ if (for_addr)
+ goto err;
+
+ reg_type = g2d_get_reg_type(reg_offset);
+ if (reg_type == REG_TYPE_NONE)
+ goto err;
+
+ buf_desc = &buf_info->descs[reg_type];
+ value = cmdlist->data[index + 1];
+
+ buf_desc->format = value & 0xf;
+ break;
+ case G2D_SRC_LEFT_TOP:
+ case G2D_DST_LEFT_TOP:
+ if (for_addr)
+ goto err;
+
+ reg_type = g2d_get_reg_type(reg_offset);
+ if (reg_type == REG_TYPE_NONE)
+ goto err;
+
+ buf_desc = &buf_info->descs[reg_type];
+ value = cmdlist->data[index + 1];
+
+ buf_desc->left_x = value & 0x1fff;
+ buf_desc->top_y = (value & 0x1fff0000) >> 16;
+ break;
+ case G2D_SRC_RIGHT_BOTTOM:
+ case G2D_DST_RIGHT_BOTTOM:
+ if (for_addr)
+ goto err;
+
+ reg_type = g2d_get_reg_type(reg_offset);
+ if (reg_type == REG_TYPE_NONE)
+ goto err;
+
+ buf_desc = &buf_info->descs[reg_type];
+ value = cmdlist->data[index + 1];
+
+ buf_desc->right_x = value & 0x1fff;
+ buf_desc->bottom_y = (value & 0x1fff0000) >> 16;
break;
default:
if (for_addr)
cmdlist->data[cmdlist->last++] = G2D_SRC_BASE_ADDR;
cmdlist->data[cmdlist->last++] = 0;
+ /*
+ * 'LIST_HOLD' command should be set to the DMA_HOLD_CMD_REG
+ * and GCF bit should be set to INTEN register if user wants
+ * G2D interrupt event once current command list execution is
+ * finished.
+ * Otherwise only ACF bit should be set to INTEN register so
+ * that one interrupt is occured after all command lists
+ * have been completed.
+ */
if (node->event) {
+ cmdlist->data[cmdlist->last++] = G2D_INTEN;
+ cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF | G2D_INTEN_GCF;
cmdlist->data[cmdlist->last++] = G2D_DMA_HOLD_CMD;
cmdlist->data[cmdlist->last++] = G2D_LIST_HOLD;
+ } else {
+ cmdlist->data[cmdlist->last++] = G2D_INTEN;
+ cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF;
}
/* Check size of cmdlist: last 2 is about G2D_BITBLT_START */
if (ret < 0)
goto err_free_event;
- node->map_nr = req->cmd_buf_nr;
+ node->buf_info.map_nr = req->cmd_buf_nr;
if (req->cmd_buf_nr) {
struct drm_exynos_g2d_cmd *cmd_buf;
exynos_gem_obj = NULL;
}
+unsigned long exynos_drm_gem_get_size(struct drm_device *dev,
+ unsigned int gem_handle,
+ struct drm_file *file_priv)
+{
+ struct exynos_drm_gem_obj *exynos_gem_obj;
+ struct drm_gem_object *obj;
+
+ obj = drm_gem_object_lookup(dev, file_priv, gem_handle);
+ if (!obj) {
+ DRM_ERROR("failed to lookup gem object.\n");
+ return 0;
+ }
+
+ exynos_gem_obj = to_exynos_gem_obj(obj);
+
+ drm_gem_object_unreference_unlocked(obj);
+
+ return exynos_gem_obj->buffer->size;
+}
+
+
struct exynos_drm_gem_obj *exynos_drm_gem_init(struct drm_device *dev,
unsigned long size)
{
int exynos_drm_gem_get_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+/* get buffer size to gem handle. */
+unsigned long exynos_drm_gem_get_size(struct drm_device *dev,
+ unsigned int gem_handle,
+ struct drm_file *file_priv);
+
/* initialize gem object. */
int exynos_drm_gem_init_object(struct drm_gem_object *obj);
}
edid_len = (1 + ctx->raw_edid->extensions) * EDID_LENGTH;
- edid = kzalloc(edid_len, GFP_KERNEL);
+ edid = kmemdup(ctx->raw_edid, edid_len, GFP_KERNEL);
if (!edid) {
DRM_DEBUG_KMS("failed to allocate edid\n");
return ERR_PTR(-ENOMEM);
}
- memcpy(edid, ctx->raw_edid, edid_len);
return edid;
}
return -EINVAL;
}
edid_len = (1 + raw_edid->extensions) * EDID_LENGTH;
- ctx->raw_edid = kzalloc(edid_len, GFP_KERNEL);
+ ctx->raw_edid = kmemdup(raw_edid, edid_len, GFP_KERNEL);
if (!ctx->raw_edid) {
DRM_DEBUG_KMS("failed to allocate raw_edid.\n");
return -ENOMEM;
}
- memcpy(ctx->raw_edid, raw_edid, edid_len);
} else {
/*
* with connection = 0, free raw_edid
mixer_ctx->win_data[win].enabled = false;
}
-int mixer_check_timing(void *ctx, struct fb_videomode *timing)
+static int mixer_check_timing(void *ctx, struct fb_videomode *timing)
{
struct mixer_context *mixer_ctx = ctx;
u32 w, h;
static void
describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
{
- seq_printf(m, "%p: %s%s %8zdKiB %02x %02x %d %d %d%s%s%s",
+ seq_printf(m, "%pK: %s%s %8zdKiB %02x %02x %d %d %d%s%s%s",
&obj->base,
get_pin_flag(obj),
get_tiling_flag(obj),
"Enable Haswell and ValleyView Support. "
"(default: false)");
+int i915_disable_power_well __read_mostly = 0;
+module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
+MODULE_PARM_DESC(disable_power_well,
+ "Disable the power well when possible (default: false)");
+
static struct drm_driver driver;
extern int intel_agp_enabled;
extern bool i915_enable_hangcheck __read_mostly;
extern int i915_enable_ppgtt __read_mostly;
extern unsigned int i915_preliminary_hw_support __read_mostly;
+extern int i915_disable_power_well __read_mostly;
extern int i915_suspend(struct drm_device *dev, pm_message_t state);
extern int i915_resume(struct drm_device *dev);
if (eb == NULL) {
int size = args->buffer_count;
int count = PAGE_SIZE / sizeof(struct hlist_head) / 2;
- BUILD_BUG_ON(!is_power_of_2(PAGE_SIZE / sizeof(struct hlist_head)));
+ BUILD_BUG_ON_NOT_POWER_OF_2(PAGE_SIZE / sizeof(struct hlist_head));
while (count > 2*size)
count >>= 1;
eb = kzalloc(count*sizeof(struct hlist_head) +
int count)
{
int i;
+ int relocs_total = 0;
+ int relocs_max = INT_MAX / sizeof(struct drm_i915_gem_relocation_entry);
for (i = 0; i < count; i++) {
char __user *ptr = (char __user *)(uintptr_t)exec[i].relocs_ptr;
if (exec[i].flags & __EXEC_OBJECT_UNKNOWN_FLAGS)
return -EINVAL;
- /* First check for malicious input causing overflow */
- if (exec[i].relocation_count >
- INT_MAX / sizeof(struct drm_i915_gem_relocation_entry))
+ /* First check for malicious input causing overflow in
+ * the worst case where we need to allocate the entire
+ * relocation tree as a single array.
+ */
+ if (exec[i].relocation_count > relocs_max - relocs_total)
return -EINVAL;
+ relocs_total += exec[i].relocation_count;
length = exec[i].relocation_count *
sizeof(struct drm_i915_gem_relocation_entry);
struct intel_crt {
struct intel_encoder base;
+ /* DPMS state is stored in the connector, which we need in the
+ * encoder's enable/disable callbacks */
+ struct intel_connector *connector;
bool force_hotplug_required;
u32 adpa_reg;
};
return true;
}
-static void intel_disable_crt(struct intel_encoder *encoder)
-{
- struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
- struct intel_crt *crt = intel_encoder_to_crt(encoder);
- u32 temp;
-
- temp = I915_READ(crt->adpa_reg);
- temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
- temp &= ~ADPA_DAC_ENABLE;
- I915_WRITE(crt->adpa_reg, temp);
-}
-
-static void intel_enable_crt(struct intel_encoder *encoder)
-{
- struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
- struct intel_crt *crt = intel_encoder_to_crt(encoder);
- u32 temp;
-
- temp = I915_READ(crt->adpa_reg);
- temp |= ADPA_DAC_ENABLE;
- I915_WRITE(crt->adpa_reg, temp);
-}
-
/* Note: The caller is required to filter out dpms modes not supported by the
* platform. */
static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
I915_WRITE(crt->adpa_reg, temp);
}
+static void intel_disable_crt(struct intel_encoder *encoder)
+{
+ intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void intel_enable_crt(struct intel_encoder *encoder)
+{
+ struct intel_crt *crt = intel_encoder_to_crt(encoder);
+
+ intel_crt_set_dpms(encoder, crt->connector->base.dpms);
+}
+
+
static void intel_crt_dpms(struct drm_connector *connector, int mode)
{
struct drm_device *dev = connector->dev;
}
connector = &intel_connector->base;
+ crt->connector = intel_connector;
drm_connector_init(dev, &intel_connector->base,
&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
num_connectors++;
}
+ if (is_cpu_edp)
+ intel_crtc->cpu_transcoder = TRANSCODER_EDP;
+ else
+ intel_crtc->cpu_transcoder = pipe;
+
/* We are not sure yet this won't happen. */
WARN(!HAS_PCH_LPT(dev), "Unexpected PCH type %d\n",
INTEL_PCH_TYPE(dev));
int pipe = intel_crtc->pipe;
int ret;
- if (IS_HASWELL(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
- intel_crtc->cpu_transcoder = TRANSCODER_EDP;
- else
- intel_crtc->cpu_transcoder = pipe;
-
drm_vblank_pre_modeset(dev, pipe);
ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
struct intel_link_m_n m_n;
int pipe = intel_crtc->pipe;
enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+ int target_clock;
/*
* Find the lane count in the intel_encoder private
}
}
+ target_clock = mode->clock;
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+ target_clock = intel_edp_target_clock(intel_encoder,
+ mode);
+ break;
+ }
+ }
+
/*
* Compute the GMCH and Link ratios. The '3' here is
* the number of bytes_per_pixel post-LUT, which we always
* set up for 8-bits of R/G/B, or 3 bytes total.
*/
intel_link_compute_m_n(intel_crtc->bpp, lane_count,
- mode->clock, adjusted_mode->clock, &m_n);
+ target_clock, adjusted_mode->clock, &m_n);
if (IS_HASWELL(dev)) {
I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
for (i = 0; i < intel_dp->lane_count; i++)
if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
break;
- if (i == intel_dp->lane_count && voltage_tries == 5) {
+ if (i == intel_dp->lane_count) {
++loop_tries;
if (loop_tries == 5) {
DRM_DEBUG_KMS("too many full retries, give up\n");
{
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
struct intel_dp *intel_dp = &intel_dig_port->dp;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
i2c_del_adapter(&intel_dp->adapter);
drm_encoder_cleanup(encoder);
if (is_edp(intel_dp)) {
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
+ mutex_lock(&dev->mode_config.mutex);
ironlake_panel_vdd_off_sync(intel_dp);
+ mutex_unlock(&dev->mode_config.mutex);
}
kfree(intel_dig_port);
}
algo->data = bus;
}
-#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 4)
+/*
+ * gmbus on gen4 seems to be able to generate legacy interrupts even when in MSI
+ * mode. This results in spurious interrupt warnings if the legacy irq no. is
+ * shared with another device. The kernel then disables that interrupt source
+ * and so prevents the other device from working properly.
+ */
+#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5)
static int
gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
u32 gmbus2_status,
u32 gmbus2 = 0;
DEFINE_WAIT(wait);
+ if (!HAS_GMBUS_IRQ(dev_priv->dev))
+ gmbus4_irq_en = 0;
+
/* Important: The hw handles only the first bit, so set only one! Since
* we also need to check for NAKs besides the hw ready/idle signal, we
* need to wake up periodically and check that ourselves. */
if (dev_priv->backlight_level == 0)
dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
- dev_priv->backlight_enabled = true;
- intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
-
if (INTEL_INFO(dev)->gen >= 4) {
uint32_t reg, tmp;
}
set_level:
- /* Check the current backlight level and try to set again if it's zero.
- * On some machines, BLC_PWM_CPU_CTL is cleared to zero automatically
- * when BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1 are written.
+ /* Call below after setting BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1.
+ * BLC_PWM_CPU_CTL may be cleared to zero automatically when these
+ * registers are set.
*/
- if (!intel_panel_get_backlight(dev))
- intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
+ dev_priv->backlight_enabled = true;
+ intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
}
static void intel_panel_init_backlight(struct drm_device *dev)
if (!IS_HASWELL(dev))
return;
+ if (!i915_disable_power_well && !enable)
+ return;
+
tmp = I915_READ(HSW_PWR_WELL_DRIVER);
is_enabled = tmp & HSW_PWR_WELL_STATE;
enable_requested = tmp & HSW_PWR_WELL_ENABLE;
m = n = p = 0;
vcomax = 800000;
vcomin = 400000;
- pllreffreq = 3333;
+ pllreffreq = 33333;
delta = 0xffffffff;
permitteddelta = clock * 5 / 1000;
- for (testp = 16; testp > 0; testp--) {
+ for (testp = 16; testp > 0; testp >>= 1) {
if (clock * testp > vcomax)
continue;
if (clock * testp < vcomin)
continue;
for (testm = 1; testm < 33; testm++) {
- for (testn = 1; testn < 257; testn++) {
+ for (testn = 17; testn < 257; testn++) {
computed = (pllreffreq * testn) /
(testm * testp);
if (computed > clock)
if (tmpdelta < delta) {
delta = tmpdelta;
n = testn - 1;
- m = (testm - 1) | ((n >> 1) & 0x80);
+ m = (testm - 1);
p = testp - 1;
}
if ((clock * testp) >= 600000)
- p |= 80;
+ p |= 0x80;
}
}
}
struct nouveau_object *parent = NULL;
struct nouveau_object *namedb = NULL;
struct nouveau_handle *handle = NULL;
- int ret = -EINVAL;
parent = nouveau_handle_ref(client, _parent);
if (!parent)
}
nouveau_object_ref(NULL, &parent);
- return ret;
+ return handle ? 0 : -EINVAL;
}
int
static void
nv50_disp_base_vblank_enable(struct nouveau_event *event, int head)
{
- nv_mask(event->priv, 0x61002c, (1 << head), (1 << head));
+ nv_mask(event->priv, 0x61002c, (4 << head), (4 << head));
}
static void
nv50_disp_base_vblank_disable(struct nouveau_event *event, int head)
{
- nv_mask(event->priv, 0x61002c, (1 << head), (0 << head));
+ nv_mask(event->priv, 0x61002c, (4 << head), 0);
}
static int
#include <core/device.h>
#include <core/subdev.h>
-enum nouveau_therm_mode {
+enum nouveau_therm_fan_mode {
NOUVEAU_THERM_CTRL_NONE = 0,
NOUVEAU_THERM_CTRL_MANUAL = 1,
NOUVEAU_THERM_CTRL_AUTO = 2,
}
}
+static void
+nouveau_bios_shadow_platform(struct nouveau_bios *bios)
+{
+ struct pci_dev *pdev = nv_device(bios)->pdev;
+ size_t size;
+
+ void __iomem *rom = pci_platform_rom(pdev, &size);
+ if (rom && size) {
+ bios->data = kmalloc(size, GFP_KERNEL);
+ if (bios->data) {
+ memcpy_fromio(bios->data, rom, size);
+ bios->size = size;
+ }
+ }
+}
+
static int
nouveau_bios_score(struct nouveau_bios *bios, const bool writeable)
{
{ "PROM", nouveau_bios_shadow_prom, false, 0, 0, NULL },
{ "ACPI", nouveau_bios_shadow_acpi, true, 0, 0, NULL },
{ "PCIROM", nouveau_bios_shadow_pci, true, 0, 0, NULL },
+ { "PLATFORM", nouveau_bios_shadow_platform, true, 0, 0, NULL },
{}
};
struct methods *mthd, *best;
}
int
-nouveau_therm_mode(struct nouveau_therm *therm, int mode)
+nouveau_therm_fan_mode(struct nouveau_therm *therm, int mode)
{
struct nouveau_therm_priv *priv = (void *)therm;
struct nouveau_device *device = nv_device(therm);
(mode != NOUVEAU_THERM_CTRL_NONE && device->card_type >= NV_C0))
return -EINVAL;
+ /* do not allow automatic fan management if the thermal sensor is
+ * not available */
+ if (priv->mode == 2 && therm->temp_get(therm) < 0)
+ return -EINVAL;
+
if (priv->mode == mode)
return 0;
- nv_info(therm, "Thermal management: %s\n", name[mode]);
+ nv_info(therm, "fan management: %s\n", name[mode]);
nouveau_therm_update(therm, mode);
return 0;
}
priv->fan->bios.max_duty = value;
return 0;
case NOUVEAU_THERM_ATTR_FAN_MODE:
- return nouveau_therm_mode(therm, value);
+ return nouveau_therm_fan_mode(therm, value);
case NOUVEAU_THERM_ATTR_THRS_FAN_BOOST:
priv->bios_sensor.thrs_fan_boost.temp = value;
priv->sensor.program_alarms(therm);
return ret;
if (priv->suspend >= 0)
- nouveau_therm_mode(therm, priv->mode);
+ nouveau_therm_fan_mode(therm, priv->mode);
priv->sensor.program_alarms(therm);
return 0;
}
int
nouveau_therm_preinit(struct nouveau_therm *therm)
{
- nouveau_therm_ic_ctor(therm);
nouveau_therm_sensor_ctor(therm);
+ nouveau_therm_ic_ctor(therm);
nouveau_therm_fan_ctor(therm);
- nouveau_therm_mode(therm, NOUVEAU_THERM_CTRL_NONE);
+ nouveau_therm_fan_mode(therm, NOUVEAU_THERM_CTRL_NONE);
+ nouveau_therm_sensor_preinit(therm);
return 0;
}
struct i2c_board_info *info)
{
struct nouveau_therm_priv *priv = (void *)nouveau_therm(i2c);
+ struct nvbios_therm_sensor *sensor = &priv->bios_sensor;
struct i2c_client *client;
request_module("%s%s", I2C_MODULE_PREFIX, info->type);
}
nv_info(priv,
- "Found an %s at address 0x%x (controlled by lm_sensors)\n",
- info->type, info->addr);
+ "Found an %s at address 0x%x (controlled by lm_sensors, "
+ "temp offset %+i C)\n",
+ info->type, info->addr, sensor->offset_constant);
priv->ic = client;
return true;
struct nouveau_therm_priv base;
};
+enum nv40_sensor_style { INVALID_STYLE = -1, OLD_STYLE = 0, NEW_STYLE = 1 };
+
+static enum nv40_sensor_style
+nv40_sensor_style(struct nouveau_therm *therm)
+{
+ struct nouveau_device *device = nv_device(therm);
+
+ switch (device->chipset) {
+ case 0x43:
+ case 0x44:
+ case 0x4a:
+ case 0x47:
+ return OLD_STYLE;
+
+ case 0x46:
+ case 0x49:
+ case 0x4b:
+ case 0x4e:
+ case 0x4c:
+ case 0x67:
+ case 0x68:
+ case 0x63:
+ return NEW_STYLE;
+ default:
+ return INVALID_STYLE;
+ }
+}
+
static int
nv40_sensor_setup(struct nouveau_therm *therm)
{
- struct nouveau_device *device = nv_device(therm);
+ enum nv40_sensor_style style = nv40_sensor_style(therm);
/* enable ADC readout and disable the ALARM threshold */
- if (device->chipset >= 0x46) {
+ if (style == NEW_STYLE) {
nv_mask(therm, 0x15b8, 0x80000000, 0);
nv_wr32(therm, 0x15b0, 0x80003fff);
- mdelay(10); /* wait for the temperature to stabilize */
+ mdelay(20); /* wait for the temperature to stabilize */
return nv_rd32(therm, 0x15b4) & 0x3fff;
- } else {
+ } else if (style == OLD_STYLE) {
nv_wr32(therm, 0x15b0, 0xff);
+ mdelay(20); /* wait for the temperature to stabilize */
return nv_rd32(therm, 0x15b4) & 0xff;
- }
+ } else
+ return -ENODEV;
}
static int
nv40_temp_get(struct nouveau_therm *therm)
{
struct nouveau_therm_priv *priv = (void *)therm;
- struct nouveau_device *device = nv_device(therm);
struct nvbios_therm_sensor *sensor = &priv->bios_sensor;
+ enum nv40_sensor_style style = nv40_sensor_style(therm);
int core_temp;
- if (device->chipset >= 0x46) {
+ if (style == NEW_STYLE) {
nv_wr32(therm, 0x15b0, 0x80003fff);
core_temp = nv_rd32(therm, 0x15b4) & 0x3fff;
- } else {
+ } else if (style == OLD_STYLE) {
nv_wr32(therm, 0x15b0, 0xff);
core_temp = nv_rd32(therm, 0x15b4) & 0xff;
- }
-
- /* Setup the sensor if the temperature is 0 */
- if (core_temp == 0)
- core_temp = nv40_sensor_setup(therm);
+ } else
+ return -ENODEV;
- if (sensor->slope_div == 0)
- sensor->slope_div = 1;
- if (sensor->offset_den == 0)
- sensor->offset_den = 1;
- if (sensor->slope_mult < 1)
- sensor->slope_mult = 1;
+ /* if the slope or the offset is unset, do no use the sensor */
+ if (!sensor->slope_div || !sensor->slope_mult ||
+ !sensor->offset_num || !sensor->offset_den)
+ return -ENODEV;
core_temp = core_temp * sensor->slope_mult / sensor->slope_div;
core_temp = core_temp + sensor->offset_num / sensor->offset_den;
core_temp = core_temp + sensor->offset_constant - 8;
+ /* reserve negative temperatures for errors */
+ if (core_temp < 0)
+ core_temp = 0;
+
return core_temp;
}
struct i2c_client *ic;
};
-int nouveau_therm_mode(struct nouveau_therm *therm, int mode);
+int nouveau_therm_fan_mode(struct nouveau_therm *therm, int mode);
int nouveau_therm_attr_get(struct nouveau_therm *therm,
enum nouveau_therm_attr_type type);
int nouveau_therm_attr_set(struct nouveau_therm *therm,
int nouveau_therm_preinit(struct nouveau_therm *);
+void nouveau_therm_sensor_preinit(struct nouveau_therm *);
void nouveau_therm_sensor_set_threshold_state(struct nouveau_therm *therm,
enum nouveau_therm_thrs thrs,
enum nouveau_therm_thrs_state st);
{
struct nouveau_therm_priv *priv = (void *)therm;
- priv->bios_sensor.slope_mult = 1;
- priv->bios_sensor.slope_div = 1;
- priv->bios_sensor.offset_num = 0;
- priv->bios_sensor.offset_den = 1;
priv->bios_sensor.offset_constant = 0;
priv->bios_sensor.thrs_fan_boost.temp = 90;
struct nouveau_therm_priv *priv = (void *)therm;
struct nvbios_therm_sensor *s = &priv->bios_sensor;
- if (!priv->bios_sensor.slope_div)
- priv->bios_sensor.slope_div = 1;
- if (!priv->bios_sensor.offset_den)
- priv->bios_sensor.offset_den = 1;
-
/* enforce a minimum hysteresis on thresholds */
s->thrs_fan_boost.hysteresis = max_t(u8, s->thrs_fan_boost.hysteresis, 2);
s->thrs_down_clock.hysteresis = max_t(u8, s->thrs_down_clock.hysteresis, 2);
const char *thresolds[] = {
"fanboost", "downclock", "critical", "shutdown"
};
- uint8_t temperature = therm->temp_get(therm);
+ int temperature = therm->temp_get(therm);
if (thrs < 0 || thrs > 3)
return;
if (dir == NOUVEAU_THERM_THRS_FALLING)
- nv_info(therm, "temperature (%u C) went below the '%s' threshold\n",
+ nv_info(therm, "temperature (%i C) went below the '%s' threshold\n",
temperature, thresolds[thrs]);
else
- nv_info(therm, "temperature (%u C) hit the '%s' threshold\n",
+ nv_info(therm, "temperature (%i C) hit the '%s' threshold\n",
temperature, thresolds[thrs]);
active = (dir == NOUVEAU_THERM_THRS_RISING);
case NOUVEAU_THERM_THRS_FANBOOST:
if (active) {
nouveau_therm_fan_set(therm, true, 100);
- nouveau_therm_mode(therm, NOUVEAU_THERM_CTRL_AUTO);
+ nouveau_therm_fan_mode(therm, NOUVEAU_THERM_CTRL_AUTO);
}
break;
case NOUVEAU_THERM_THRS_DOWNCLOCK:
NOUVEAU_THERM_THRS_SHUTDOWN);
/* schedule the next poll in one second */
- if (list_empty(&alarm->head))
+ if (therm->temp_get(therm) >= 0 && list_empty(&alarm->head))
ptimer->alarm(ptimer, 1000 * 1000 * 1000, alarm);
spin_unlock_irqrestore(&priv->sensor.alarm_program_lock, flags);
alarm_timer_callback(&priv->sensor.therm_poll_alarm);
}
+void
+nouveau_therm_sensor_preinit(struct nouveau_therm *therm)
+{
+ const char *sensor_avail = "yes";
+
+ if (therm->temp_get(therm) < 0)
+ sensor_avail = "no";
+
+ nv_info(therm, "internal sensor: %s\n", sensor_avail);
+}
+
int
nouveau_therm_sensor_ctor(struct nouveau_therm *therm)
{
{
struct nouveau_abi16_ntfy *ntfy, *temp;
+ /* wait for all activity to stop before releasing notify object, which
+ * may be still in use */
+ if (chan->chan && chan->ntfy)
+ nouveau_channel_idle(chan->chan);
+
/* cleanup notifier state */
list_for_each_entry_safe(ntfy, temp, &chan->notifiers, head) {
nouveau_abi16_ntfy_fini(chan, ntfy);
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_device *device = nv_device(drm->device);
struct nouveau_abi16 *abi16 = nouveau_abi16_get(file_priv, dev);
- struct nouveau_abi16_chan *chan, *temp;
+ struct nouveau_abi16_chan *chan = NULL, *temp;
struct nouveau_abi16_ntfy *ntfy;
struct nouveau_object *object;
struct nv_dma_class args = {};
if (unlikely(nv_device(abi16->device)->card_type >= NV_C0))
return nouveau_abi16_put(abi16, -EINVAL);
- list_for_each_entry_safe(chan, temp, &abi16->channels, head) {
- if (chan->chan->handle == (NVDRM_CHAN | info->channel))
+ list_for_each_entry(temp, &abi16->channels, head) {
+ if (temp->chan->handle == (NVDRM_CHAN | info->channel)) {
+ chan = temp;
break;
- chan = NULL;
+ }
}
if (!chan)
{
struct drm_nouveau_gpuobj_free *fini = data;
struct nouveau_abi16 *abi16 = nouveau_abi16_get(file_priv, dev);
- struct nouveau_abi16_chan *chan, *temp;
+ struct nouveau_abi16_chan *chan = NULL, *temp;
struct nouveau_abi16_ntfy *ntfy;
int ret;
if (unlikely(!abi16))
return -ENOMEM;
- list_for_each_entry_safe(chan, temp, &abi16->channels, head) {
- if (chan->chan->handle == (NVDRM_CHAN | fini->channel))
+ list_for_each_entry(temp, &abi16->channels, head) {
+ if (temp->chan->handle == (NVDRM_CHAN | fini->channel)) {
+ chan = temp;
break;
- chan = NULL;
+ }
}
if (!chan)
stride = 16 * 4;
height = amount / stride;
- if (new_mem->mem_type == TTM_PL_VRAM &&
+ if (old_mem->mem_type == TTM_PL_VRAM &&
nouveau_bo_tile_layout(nvbo)) {
ret = RING_SPACE(chan, 8);
if (ret)
BEGIN_NV04(chan, NvSubCopy, 0x0200, 1);
OUT_RING (chan, 1);
}
- if (old_mem->mem_type == TTM_PL_VRAM &&
+ if (new_mem->mem_type == TTM_PL_VRAM &&
nouveau_bo_tile_layout(nvbo)) {
ret = RING_SPACE(chan, 8);
if (ret)
static struct drm_driver driver;
+static int
+nouveau_drm_vblank_handler(struct nouveau_eventh *event, int head)
+{
+ struct nouveau_drm *drm =
+ container_of(event, struct nouveau_drm, vblank[head]);
+ drm_handle_vblank(drm->dev, head);
+ return NVKM_EVENT_KEEP;
+}
+
static int
nouveau_drm_vblank_enable(struct drm_device *dev, int head)
{
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_disp *pdisp = nouveau_disp(drm->device);
- nouveau_event_get(pdisp->vblank, head, &drm->vblank);
+
+ if (WARN_ON_ONCE(head > ARRAY_SIZE(drm->vblank)))
+ return -EIO;
+ WARN_ON_ONCE(drm->vblank[head].func);
+ drm->vblank[head].func = nouveau_drm_vblank_handler;
+ nouveau_event_get(pdisp->vblank, head, &drm->vblank[head]);
return 0;
}
{
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_disp *pdisp = nouveau_disp(drm->device);
- nouveau_event_put(pdisp->vblank, head, &drm->vblank);
-}
-
-static int
-nouveau_drm_vblank_handler(struct nouveau_eventh *event, int head)
-{
- struct nouveau_drm *drm =
- container_of(event, struct nouveau_drm, vblank);
- drm_handle_vblank(drm->dev, head);
- return NVKM_EVENT_KEEP;
+ if (drm->vblank[head].func)
+ nouveau_event_put(pdisp->vblank, head, &drm->vblank[head]);
+ else
+ WARN_ON_ONCE(1);
+ drm->vblank[head].func = NULL;
}
static u64
dev->dev_private = drm;
drm->dev = dev;
- drm->vblank.func = nouveau_drm_vblank_handler;
INIT_LIST_HEAD(&drm->clients);
spin_lock_init(&drm->tile.lock);
struct nvbios vbios;
struct nouveau_display *display;
struct backlight_device *backlight;
- struct nouveau_eventh vblank;
+ struct nouveau_eventh vblank[4];
/* power management */
struct nouveau_pm *pm;
struct drm_device *dev = dev_get_drvdata(d);
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_therm *therm = nouveau_therm(drm->device);
+ int temp = therm->temp_get(therm);
- return snprintf(buf, PAGE_SIZE, "%d\n", therm->temp_get(therm) * 1000);
+ if (temp < 0)
+ return temp;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", temp * 1000);
}
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, nouveau_hwmon_show_temp,
NULL, 0);
nouveau_hwmon_get_pwm1_max,
nouveau_hwmon_set_pwm1_max, 0);
-static struct attribute *hwmon_attributes[] = {
+static struct attribute *hwmon_default_attributes[] = {
+ &sensor_dev_attr_name.dev_attr.attr,
+ &sensor_dev_attr_update_rate.dev_attr.attr,
+ NULL
+};
+static struct attribute *hwmon_temp_attributes[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_emergency.dev_attr.attr,
&sensor_dev_attr_temp1_emergency_hyst.dev_attr.attr,
- &sensor_dev_attr_name.dev_attr.attr,
- &sensor_dev_attr_update_rate.dev_attr.attr,
NULL
};
static struct attribute *hwmon_fan_rpm_attributes[] = {
NULL
};
-static const struct attribute_group hwmon_attrgroup = {
- .attrs = hwmon_attributes,
+static const struct attribute_group hwmon_default_attrgroup = {
+ .attrs = hwmon_default_attributes,
+};
+static const struct attribute_group hwmon_temp_attrgroup = {
+ .attrs = hwmon_temp_attributes,
};
static const struct attribute_group hwmon_fan_rpm_attrgroup = {
.attrs = hwmon_fan_rpm_attributes,
}
dev_set_drvdata(hwmon_dev, dev);
- /* default sysfs entries */
- ret = sysfs_create_group(&hwmon_dev->kobj, &hwmon_attrgroup);
+ /* set the default attributes */
+ ret = sysfs_create_group(&hwmon_dev->kobj, &hwmon_default_attrgroup);
if (ret) {
if (ret)
goto error;
}
+ /* if the card has a working thermal sensor */
+ if (therm->temp_get(therm) >= 0) {
+ ret = sysfs_create_group(&hwmon_dev->kobj, &hwmon_temp_attrgroup);
+ if (ret) {
+ if (ret)
+ goto error;
+ }
+ }
+
/* if the card has a pwm fan */
/*XXX: incorrect, need better detection for this, some boards have
* the gpio entries for pwm fan control even when there's no
struct nouveau_pm *pm = nouveau_pm(dev);
if (pm->hwmon) {
- sysfs_remove_group(&pm->hwmon->kobj, &hwmon_attrgroup);
- sysfs_remove_group(&pm->hwmon->kobj,
- &hwmon_pwm_fan_attrgroup);
- sysfs_remove_group(&pm->hwmon->kobj,
- &hwmon_fan_rpm_attrgroup);
+ sysfs_remove_group(&pm->hwmon->kobj, &hwmon_default_attrgroup);
+ sysfs_remove_group(&pm->hwmon->kobj, &hwmon_temp_attrgroup);
+ sysfs_remove_group(&pm->hwmon->kobj, &hwmon_pwm_fan_attrgroup);
+ sysfs_remove_group(&pm->hwmon->kobj, &hwmon_fan_rpm_attrgroup);
hwmon_device_unregister(pm->hwmon);
}
swap_interval <<= 4;
if (swap_interval == 0)
swap_interval |= 0x100;
+ if (chan == NULL)
+ evo_sync(crtc->dev);
push = evo_wait(sync, 128);
if (unlikely(push == NULL))
sync->addr ^= 0x10;
sync->data++;
FIRE_RING (chan);
- } else {
- evo_sync(crtc->dev);
}
/* queue the flip */
NV_WARN(drm, "failed to create encoder %d/%d/%d: %d\n",
dcbe->location, dcbe->type,
ffs(dcbe->or) - 1, ret);
+ ret = 0;
}
}
(rdev->pdev->device == 0x9907) ||
(rdev->pdev->device == 0x9908) ||
(rdev->pdev->device == 0x9909) ||
+ (rdev->pdev->device == 0x990B) ||
+ (rdev->pdev->device == 0x990C) ||
+ (rdev->pdev->device == 0x990F) ||
(rdev->pdev->device == 0x9910) ||
- (rdev->pdev->device == 0x9917)) {
+ (rdev->pdev->device == 0x9917) ||
+ (rdev->pdev->device == 0x9999)) {
rdev->config.cayman.max_simds_per_se = 6;
rdev->config.cayman.max_backends_per_se = 2;
} else if ((rdev->pdev->device == 0x9903) ||
(rdev->pdev->device == 0x9904) ||
(rdev->pdev->device == 0x990A) ||
+ (rdev->pdev->device == 0x990D) ||
+ (rdev->pdev->device == 0x990E) ||
(rdev->pdev->device == 0x9913) ||
(rdev->pdev->device == 0x9918)) {
rdev->config.cayman.max_simds_per_se = 4;
(rdev->pdev->device == 0x9990) ||
(rdev->pdev->device == 0x9991) ||
(rdev->pdev->device == 0x9994) ||
+ (rdev->pdev->device == 0x9995) ||
+ (rdev->pdev->device == 0x9996) ||
+ (rdev->pdev->device == 0x999A) ||
(rdev->pdev->device == 0x99A0)) {
rdev->config.cayman.max_simds_per_se = 3;
rdev->config.cayman.max_backends_per_se = 1;
WREG32(DMA_TILING_CONFIG + DMA0_REGISTER_OFFSET, gb_addr_config);
WREG32(DMA_TILING_CONFIG + DMA1_REGISTER_OFFSET, gb_addr_config);
- tmp = gb_addr_config & NUM_PIPES_MASK;
- tmp = r6xx_remap_render_backend(rdev, tmp,
- rdev->config.cayman.max_backends_per_se *
- rdev->config.cayman.max_shader_engines,
- CAYMAN_MAX_BACKENDS, disabled_rb_mask);
+ if ((rdev->config.cayman.max_backends_per_se == 1) &&
+ (rdev->flags & RADEON_IS_IGP)) {
+ if ((disabled_rb_mask & 3) == 1) {
+ /* RB0 disabled, RB1 enabled */
+ tmp = 0x11111111;
+ } else {
+ /* RB1 disabled, RB0 enabled */
+ tmp = 0x00000000;
+ }
+ } else {
+ tmp = gb_addr_config & NUM_PIPES_MASK;
+ tmp = r6xx_remap_render_backend(rdev, tmp,
+ rdev->config.cayman.max_backends_per_se *
+ rdev->config.cayman.max_shader_engines,
+ CAYMAN_MAX_BACKENDS, disabled_rb_mask);
+ }
WREG32(GB_BACKEND_MAP, tmp);
cgts_tcc_disable = 0xffff0000;
int cayman_suspend(struct radeon_device *rdev)
{
r600_audio_fini(rdev);
+ radeon_vm_manager_fini(rdev);
cayman_cp_enable(rdev, false);
cayman_dma_stop(rdev);
evergreen_irq_suspend(rdev);
goto out_cleanup;
}
- /* r100 doesn't have dma engine so skip the test */
- /* also, VRAM-to-VRAM test doesn't make much sense for DMA */
- /* skip it as well if domains are the same */
- if ((rdev->asic->copy.dma) && (sdomain != ddomain)) {
+ if (rdev->asic->copy.dma) {
time = radeon_benchmark_do_move(rdev, size, saddr, daddr,
RADEON_BENCHMARK_COPY_DMA, n);
if (time < 0)
sdomain, ddomain, "dma");
}
- time = radeon_benchmark_do_move(rdev, size, saddr, daddr,
- RADEON_BENCHMARK_COPY_BLIT, n);
- if (time < 0)
- goto out_cleanup;
- if (time > 0)
- radeon_benchmark_log_results(n, size, time,
- sdomain, ddomain, "blit");
+ if (rdev->asic->copy.blit) {
+ time = radeon_benchmark_do_move(rdev, size, saddr, daddr,
+ RADEON_BENCHMARK_COPY_BLIT, n);
+ if (time < 0)
+ goto out_cleanup;
+ if (time > 0)
+ radeon_benchmark_log_results(n, size, time,
+ sdomain, ddomain, "blit");
+ }
out_cleanup:
if (sobj) {
return true;
}
+static bool radeon_read_platform_bios(struct radeon_device *rdev)
+{
+ uint8_t __iomem *bios;
+ size_t size;
+
+ rdev->bios = NULL;
+
+ bios = pci_platform_rom(rdev->pdev, &size);
+ if (!bios) {
+ return false;
+ }
+
+ if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) {
+ return false;
+ }
+ rdev->bios = kmemdup(bios, size, GFP_KERNEL);
+ if (rdev->bios == NULL) {
+ return false;
+ }
+
+ return true;
+}
+
#ifdef CONFIG_ACPI
/* ATRM is used to get the BIOS on the discrete cards in
* dual-gpu systems.
if (r == false) {
r = radeon_read_disabled_bios(rdev);
}
+ if (r == false) {
+ r = radeon_read_platform_bios(rdev);
+ }
if (r == false || rdev->bios == NULL) {
DRM_ERROR("Unable to locate a BIOS ROM\n");
rdev->bios = NULL;
int si_suspend(struct radeon_device *rdev)
{
+ radeon_vm_manager_fini(rdev);
si_cp_enable(rdev, false);
cayman_dma_stop(rdev);
si_irq_suspend(rdev);
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) },
- { HID_USB_DEVICE(USB_VENDOR_ID_MASTERKIT, USB_DEVICE_ID_MASTERKIT_MA901RADIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) },
hdev->product <= USB_DEVICE_ID_VELLEMAN_K8061_LAST))
return true;
break;
+ case USB_VENDOR_ID_ATMEL_V_USB:
+ /* Masterkit MA901 usb radio based on Atmel tiny85 chip and
+ * it has the same USB ID as many Atmel V-USB devices. This
+ * usb radio is handled by radio-ma901.c driver so we want
+ * ignore the hid. Check the name, bus, product and ignore
+ * if we have MA901 usb radio.
+ */
+ if (hdev->product == USB_DEVICE_ID_ATMEL_V_USB &&
+ hdev->bus == BUS_USB &&
+ strncmp(hdev->name, "www.masterkit.ru MA901", 22) == 0)
+ return true;
+ break;
}
if (hdev->type == HID_TYPE_USBMOUSE &&
#define USB_VENDOR_ID_ATMEL 0x03eb
#define USB_DEVICE_ID_ATMEL_MULTITOUCH 0x211c
#define USB_DEVICE_ID_ATMEL_MXT_DIGITIZER 0x2118
+#define USB_VENDOR_ID_ATMEL_V_USB 0x16c0
+#define USB_DEVICE_ID_ATMEL_V_USB 0x05df
#define USB_VENDOR_ID_AUREAL 0x0755
#define USB_DEVICE_ID_AUREAL_W01RN 0x2626
#define USB_VENDOR_ID_MADCATZ 0x0738
#define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540
-#define USB_VENDOR_ID_MASTERKIT 0x16c0
-#define USB_DEVICE_ID_MASTERKIT_MA901RADIO 0x05df
-
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
#define USB_VENDOR_ID_MONTEREY 0x0566
#define USB_DEVICE_ID_GENIUS_KB29E 0x3004
+#define USB_VENDOR_ID_MSI 0x1770
+#define USB_DEVICE_ID_MSI_GX680R_LED_PANEL 0xff00
+
#define USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR 0x0400
#define USB_DEVICE_ID_N_S_HARMONY 0xc359
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001 0x3001
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008
+#define USB_VENDOR_ID_REALTEK 0x0bda
+#define USB_DEVICE_ID_REALTEK_READER 0x0152
+
#define USB_VENDOR_ID_ROCCAT 0x1e7d
#define USB_DEVICE_ID_ROCCAT_ARVO 0x30d4
#define USB_DEVICE_ID_ROCCAT_ISKU 0x319c
return 0;
}
+static void magicmouse_input_configured(struct hid_device *hdev,
+ struct hid_input *hi)
+
+{
+ struct magicmouse_sc *msc = hid_get_drvdata(hdev);
+
+ int ret = magicmouse_setup_input(msc->input, hdev);
+ if (ret) {
+ hid_err(hdev, "magicmouse setup input failed (%d)\n", ret);
+ /* clean msc->input to notify probe() of the failure */
+ msc->input = NULL;
+ }
+}
+
+
static int magicmouse_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
goto err_free;
}
- /* We do this after hid-input is done parsing reports so that
- * hid-input uses the most natural button and axis IDs.
- */
- if (msc->input) {
- ret = magicmouse_setup_input(msc->input, hdev);
- if (ret) {
- hid_err(hdev, "magicmouse setup input failed (%d)\n", ret);
- goto err_stop_hw;
- }
+ if (!msc->input) {
+ hid_err(hdev, "magicmouse input not registered\n");
+ ret = -ENOMEM;
+ goto err_stop_hw;
}
if (id->product == USB_DEVICE_ID_APPLE_MAGICMOUSE)
.remove = magicmouse_remove,
.raw_event = magicmouse_raw_event,
.input_mapping = magicmouse_input_mapping,
+ .input_configured = magicmouse_input_configured,
};
module_hid_driver(magicmouse_driver);
{
struct mt_device *td = hid_get_drvdata(hid);
__s32 quirks = td->mtclass.quirks;
+ struct input_dev *input = field->hidinput->input;
if (hid->claimed & HID_CLAIMED_INPUT) {
switch (usage->hid) {
break;
default:
+ if (usage->type)
+ input_event(input, usage->type, usage->code,
+ value);
return;
}
if (usage->usage_index + 1 == field->report_count) {
/* we only take into account the last report. */
if (usage->hid == td->last_slot_field)
- mt_complete_slot(td, field->hidinput->input);
+ mt_complete_slot(td, input);
if (field->index == td->last_field_index
&& td->num_received >= td->num_expected)
{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GX680R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_REALTEK, USB_DEVICE_ID_REALTEK_READER, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SIGMATEL, USB_DEVICE_ID_SIGMATEL_STMP3780, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_curr1_input.dev_attr.attr,
&sensor_dev_attr_power1_input.dev_attr.attr,
+ NULL
};
static const struct attribute_group pem_input_group = {
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan3_input.dev_attr.attr,
+ NULL
};
static const struct attribute_group pem_fan_group = {
which contains this code, we don't worry about the wasted space.
*/
-#include <linux/hwmon.h>
+#include <linux/kernel.h>
/* straight from the datasheet */
#define LM75_TEMP_MIN (-55000)
struct ltc2978_data {
enum chips id;
int vin_min, vin_max;
- int temp_min, temp_max;
+ int temp_min, temp_max[2];
int vout_min[8], vout_max[8];
int iout_max[2];
int temp2_max;
ret = pmbus_read_word_data(client, page,
LTC2978_MFR_TEMPERATURE_PEAK);
if (ret >= 0) {
- if (lin11_to_val(ret) > lin11_to_val(data->temp_max))
- data->temp_max = ret;
- ret = data->temp_max;
+ if (lin11_to_val(ret)
+ > lin11_to_val(data->temp_max[page]))
+ data->temp_max[page] = ret;
+ ret = data->temp_max[page];
}
break;
case PMBUS_VIRT_RESET_VOUT_HISTORY:
break;
case PMBUS_VIRT_RESET_TEMP_HISTORY:
data->temp_min = 0x7bff;
- data->temp_max = 0x7c00;
+ data->temp_max[page] = 0x7c00;
ret = ltc2978_clear_peaks(client, page, data->id);
break;
default:
data->vin_min = 0x7bff;
data->vin_max = 0x7c00;
data->temp_min = 0x7bff;
- data->temp_max = 0x7c00;
+ for (i = 0; i < ARRAY_SIZE(data->temp_max); i++)
+ data->temp_max[i] = 0x7c00;
data->temp2_max = 0x7c00;
switch (data->id) {
static int pmbus_add_attribute(struct pmbus_data *data, struct attribute *attr)
{
if (data->num_attributes >= data->max_attributes - 1) {
- data->max_attributes += PMBUS_ATTR_ALLOC_SIZE;
- data->group.attrs = krealloc(data->group.attrs,
- sizeof(struct attribute *) *
- data->max_attributes, GFP_KERNEL);
- if (data->group.attrs == NULL)
+ int new_max_attrs = data->max_attributes + PMBUS_ATTR_ALLOC_SIZE;
+ void *new_attrs = krealloc(data->group.attrs,
+ new_max_attrs * sizeof(void *),
+ GFP_KERNEL);
+ if (!new_attrs)
return -ENOMEM;
+ data->group.attrs = new_attrs;
+ data->max_attributes = new_max_attrs;
}
data->group.attrs[data->num_attributes++] = attr;
menuconfig I2C
tristate "I2C support"
- depends on !S390
select RT_MUTEXES
---help---
I2C (pronounce: I-squared-C) is a slow serial bus protocol used in
config I2C_SMBUS
tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
+ depends on GENERIC_HARDIRQS
help
Say Y here if you want support for SMBus extensions to the I2C
specification. At the moment, the only supported extension is
config I2C_ISCH
tristate "Intel SCH SMBus 1.0"
- depends on PCI
+ depends on PCI && GENERIC_HARDIRQS
select LPC_SCH
help
Say Y here if you want to use SMBus controller on the Intel SCH
config I2C_OCORES
tristate "OpenCores I2C Controller"
+ depends on GENERIC_HARDIRQS
help
If you say yes to this option, support will be included for the
OpenCores I2C controller. For details see
config I2C_PARPORT
tristate "Parallel port adapter"
- depends on PARPORT
+ depends on PARPORT && GENERIC_HARDIRQS
select I2C_ALGOBIT
select I2C_SMBUS
help
config I2C_PARPORT_LIGHT
tristate "Parallel port adapter (light)"
+ depends on GENERIC_HARDIRQS
select I2C_ALGOBIT
select I2C_SMBUS
help
adap->algo = &i2c_dw_algo;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
- ACPI_HANDLE_SET(&adap->dev, ACPI_HANDLE(&pdev->dev));
r = i2c_add_numbered_adapter(adap);
if (r) {
/* PCI DIDs for the Intel SMBus Message Transport (SMT) Devices */
#define PCI_DEVICE_ID_INTEL_S1200_SMT0 0x0c59
#define PCI_DEVICE_ID_INTEL_S1200_SMT1 0x0c5a
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMT 0x1f15
#define ISMT_DESC_ENTRIES 32 /* number of descriptor entries */
#define ISMT_MAX_RETRIES 3 /* number of SMBus retries to attempt */
static const DEFINE_PCI_DEVICE_TABLE(ismt_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) },
{ 0, }
};
int clk_multiplier = I2C_CLK_MULTIPLIER_STD_FAST_MODE;
u32 clk_divisor;
- tegra_i2c_clock_enable(i2c_dev);
+ err = tegra_i2c_clock_enable(i2c_dev);
+ if (err < 0) {
+ dev_err(i2c_dev->dev, "Clock enable failed %d\n", err);
+ return err;
+ }
tegra_periph_reset_assert(i2c_dev->div_clk);
udelay(2);
if (i2c_dev->is_suspended)
return -EBUSY;
- tegra_i2c_clock_enable(i2c_dev);
+ ret = tegra_i2c_clock_enable(i2c_dev);
+ if (ret < 0) {
+ dev_err(i2c_dev->dev, "Clock enable failed %d\n", ret);
+ return ret;
+ }
+
for (i = 0; i < num; i++) {
enum msg_end_type end_type = MSG_END_STOP;
if (i < (num - 1)) {
*
* Copyright (c) 2010 Ericsson AB.
*
- * Author: Guenter Roeck <guenter.roeck@ericsson.com>
+ * Author: Guenter Roeck <linux@roeck-us.net>
*
* Derived from:
* pca954x.c
int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
{
int err;
- struct st_sensor_odr_avl odr_out;
+ struct st_sensor_odr_avl odr_out = {0, 0};
struct st_sensor_data *sdata = iio_priv(indio_dev);
err = st_sensors_match_odr(sdata->sensor, odr, &odr_out);
static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
{
- int err, i;
+ int err, i = 0;
struct st_sensor_data *sdata = iio_priv(indio_dev);
err = st_sensors_match_fs(sdata->sensor, fs, &i);
int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable)
{
- bool found;
u8 tmp_value;
int err = -EINVAL;
- struct st_sensor_odr_avl odr_out;
+ bool found = false;
+ struct st_sensor_odr_avl odr_out = {0, 0};
struct st_sensor_data *sdata = iio_priv(indio_dev);
if (enable) {
- found = false;
tmp_value = sdata->sensor->pw.value_on;
if ((sdata->sensor->odr.addr == sdata->sensor->pw.addr) &&
(sdata->sensor->odr.mask == sdata->sensor->pw.mask)) {
#define AD5064_ADDR(x) ((x) << 20)
#define AD5064_CMD(x) ((x) << 24)
-#define AD5064_ADDR_DAC(chan) (chan)
#define AD5064_ADDR_ALL_DAC 0xF
#define AD5064_CMD_WRITE_INPUT_N 0x0
}
static int ad5064_sync_powerdown_mode(struct ad5064_state *st,
- unsigned int channel)
+ const struct iio_chan_spec *chan)
{
unsigned int val;
int ret;
- val = (0x1 << channel);
+ val = (0x1 << chan->address);
- if (st->pwr_down[channel])
- val |= st->pwr_down_mode[channel] << 8;
+ if (st->pwr_down[chan->channel])
+ val |= st->pwr_down_mode[chan->channel] << 8;
ret = ad5064_write(st, AD5064_CMD_POWERDOWN_DAC, 0, val, 0);
mutex_lock(&indio_dev->mlock);
st->pwr_down_mode[chan->channel] = mode + 1;
- ret = ad5064_sync_powerdown_mode(st, chan->channel);
+ ret = ad5064_sync_powerdown_mode(st, chan);
mutex_unlock(&indio_dev->mlock);
return ret;
mutex_lock(&indio_dev->mlock);
st->pwr_down[chan->channel] = pwr_down;
- ret = ad5064_sync_powerdown_mode(st, chan->channel);
+ ret = ad5064_sync_powerdown_mode(st, chan);
mutex_unlock(&indio_dev->mlock);
return ret ? ret : len;
}
switch (mask) {
case IIO_CHAN_INFO_RAW:
- if (val > (1 << chan->scan_type.realbits) || val < 0)
+ if (val >= (1 << chan->scan_type.realbits) || val < 0)
return -EINVAL;
mutex_lock(&indio_dev->mlock);
{ },
};
-#define AD5064_CHANNEL(chan, bits) { \
+#define AD5064_CHANNEL(chan, addr, bits) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.output = 1, \
.channel = (chan), \
.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
- .address = AD5064_ADDR_DAC(chan), \
+ .address = addr, \
.scan_type = IIO_ST('u', (bits), 16, 20 - (bits)), \
.ext_info = ad5064_ext_info, \
}
#define DECLARE_AD5064_CHANNELS(name, bits) \
const struct iio_chan_spec name[] = { \
- AD5064_CHANNEL(0, bits), \
- AD5064_CHANNEL(1, bits), \
- AD5064_CHANNEL(2, bits), \
- AD5064_CHANNEL(3, bits), \
- AD5064_CHANNEL(4, bits), \
- AD5064_CHANNEL(5, bits), \
- AD5064_CHANNEL(6, bits), \
- AD5064_CHANNEL(7, bits), \
+ AD5064_CHANNEL(0, 0, bits), \
+ AD5064_CHANNEL(1, 1, bits), \
+ AD5064_CHANNEL(2, 2, bits), \
+ AD5064_CHANNEL(3, 3, bits), \
+ AD5064_CHANNEL(4, 4, bits), \
+ AD5064_CHANNEL(5, 5, bits), \
+ AD5064_CHANNEL(6, 6, bits), \
+ AD5064_CHANNEL(7, 7, bits), \
+}
+
+#define DECLARE_AD5065_CHANNELS(name, bits) \
+const struct iio_chan_spec name[] = { \
+ AD5064_CHANNEL(0, 0, bits), \
+ AD5064_CHANNEL(1, 3, bits), \
}
static DECLARE_AD5064_CHANNELS(ad5024_channels, 12);
static DECLARE_AD5064_CHANNELS(ad5044_channels, 14);
static DECLARE_AD5064_CHANNELS(ad5064_channels, 16);
+static DECLARE_AD5065_CHANNELS(ad5025_channels, 12);
+static DECLARE_AD5065_CHANNELS(ad5045_channels, 14);
+static DECLARE_AD5065_CHANNELS(ad5065_channels, 16);
+
static const struct ad5064_chip_info ad5064_chip_info_tbl[] = {
[ID_AD5024] = {
.shared_vref = false,
},
[ID_AD5025] = {
.shared_vref = false,
- .channels = ad5024_channels,
+ .channels = ad5025_channels,
.num_channels = 2,
},
[ID_AD5044] = {
},
[ID_AD5045] = {
.shared_vref = false,
- .channels = ad5044_channels,
+ .channels = ad5045_channels,
.num_channels = 2,
},
[ID_AD5064] = {
},
[ID_AD5065] = {
.shared_vref = false,
- .channels = ad5064_channels,
+ .channels = ad5065_channels,
.num_channels = 2,
},
[ID_AD5628_1] = {
{
struct iio_dev *indio_dev;
struct ad5064_state *st;
+ unsigned int midscale;
unsigned int i;
int ret;
goto error_free_reg;
}
- for (i = 0; i < st->chip_info->num_channels; ++i) {
- st->pwr_down_mode[i] = AD5064_LDAC_PWRDN_1K;
- st->dac_cache[i] = 0x8000;
- }
-
indio_dev->dev.parent = dev;
indio_dev->name = name;
indio_dev->info = &ad5064_info;
indio_dev->channels = st->chip_info->channels;
indio_dev->num_channels = st->chip_info->num_channels;
+ midscale = (1 << indio_dev->channels[0].scan_type.realbits) / 2;
+
+ for (i = 0; i < st->chip_info->num_channels; ++i) {
+ st->pwr_down_mode[i] = AD5064_LDAC_PWRDN_1K;
+ st->dac_cache[i] = midscale;
+ }
+
ret = iio_device_register(indio_dev);
if (ret)
goto error_disable_reg;
config INV_MPU6050_IIO
tristate "Invensense MPU6050 devices"
depends on I2C && SYSFS
+ select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
This driver supports the Invensense MPU6050 devices.
neigh = dst_neigh_lookup(ep->dst,
&ep->com.cm_id->remote_addr.sin_addr.s_addr);
+ if (!neigh) {
+ pr_err("%s - cannot alloc neigh.\n", __func__);
+ err = -ENOMEM;
+ goto fail4;
+ }
+
/* get a l2t entry */
if (neigh->dev->flags & IFF_LOOPBACK) {
PDBG("%s LOOPBACK\n", __func__);
dst = &rt->dst;
neigh = dst_neigh_lookup_skb(dst, skb);
+ if (!neigh) {
+ pr_err("%s - failed to allocate neigh!\n",
+ __func__);
+ goto free_dst;
+ }
+
if (neigh->dev->flags & IFF_LOOPBACK) {
pdev = ip_dev_find(&init_net, iph->daddr);
e = cxgb4_l2t_get(dev->rdev.lldi.l2t, neigh,
wq->rq.queue = dma_alloc_coherent(&(rdev->lldi.pdev->dev),
wq->rq.memsize, &(wq->rq.dma_addr),
GFP_KERNEL);
- if (!wq->rq.queue)
+ if (!wq->rq.queue) {
+ ret = -ENOMEM;
goto free_sq;
+ }
PDBG("%s sq base va 0x%p pa 0x%llx rq base va 0x%p pa 0x%llx\n",
__func__, wq->sq.queue,
(unsigned long long)virt_to_phys(wq->sq.queue),
goto bail;
}
- opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
+ opcode = (be32_to_cpu(ohdr->bth[0]) >> 24) & 0x7f;
dev->opstats[opcode].n_bytes += tlen;
dev->opstats[opcode].n_packets++;
INIT_LIST_HEAD(&dev->sriov.cm_list);
dev->sriov.sl_id_map = RB_ROOT;
idr_init(&dev->sriov.pv_id_table);
- idr_pre_get(&dev->sriov.pv_id_table, GFP_KERNEL);
}
/* slave = -1 ==> all slaves */
config INFINIBAND_QIB
- tristate "QLogic PCIe HCA support"
+ tristate "Intel PCIe HCA support"
depends on 64BIT
---help---
- This is a low-level driver for QLogic PCIe QLE InfiniBand host
- channel adapters. This driver does not support the QLogic
+ This is a low-level driver for Intel PCIe QLE InfiniBand host
+ channel adapters. This driver does not support the Intel
HyperTransport card (model QHT7140).
/*
+ * Copyright (c) 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
"Attempt pre-IBTA 1.2 DDR speed negotiation");
MODULE_LICENSE("Dual BSD/GPL");
-MODULE_AUTHOR("QLogic <support@qlogic.com>");
-MODULE_DESCRIPTION("QLogic IB driver");
+MODULE_AUTHOR("Intel <ibsupport@intel.com>");
+MODULE_DESCRIPTION("Intel IB driver");
MODULE_VERSION(QIB_DRIVER_VERSION);
/*
/*
+ * Copyright (c) 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
* All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
/*
* This file contains all the chip-specific register information and
- * access functions for the QLogic QLogic_IB PCI-Express chip.
+ * access functions for the Intel Intel_IB PCI-Express chip.
*
*/
/*
- * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2012, 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
static void qib_remove_one(struct pci_dev *);
static int qib_init_one(struct pci_dev *, const struct pci_device_id *);
-#define DRIVER_LOAD_MSG "QLogic " QIB_DRV_NAME " loaded: "
+#define DRIVER_LOAD_MSG "Intel " QIB_DRV_NAME " loaded: "
#define PFX QIB_DRV_NAME ": "
static DEFINE_PCI_DEVICE_TABLE(qib_pci_tbl) = {
dd = qib_init_iba6120_funcs(pdev, ent);
#else
qib_early_err(&pdev->dev,
- "QLogic PCIE device 0x%x cannot work if CONFIG_PCI_MSI is not enabled\n",
+ "Intel PCIE device 0x%x cannot work if CONFIG_PCI_MSI is not enabled\n",
ent->device);
dd = ERR_PTR(-ENODEV);
#endif
default:
qib_early_err(&pdev->dev,
- "Failing on unknown QLogic deviceid 0x%x\n",
+ "Failing on unknown Intel deviceid 0x%x\n",
ent->device);
ret = -ENODEV;
}
/*
- * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
/*
- * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2012, 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
ibdev->dma_ops = &qib_dma_mapping_ops;
snprintf(ibdev->node_desc, sizeof(ibdev->node_desc),
- "QLogic Infiniband HCA %s", init_utsname()->nodename);
+ "Intel Infiniband HCA %s", init_utsname()->nodename);
ret = ib_register_device(ibdev, qib_create_port_files);
if (ret)
if (++priv->tx_outstanding == ipoib_sendq_size) {
ipoib_dbg(priv, "TX ring 0x%x full, stopping kernel net queue\n",
tx->qp->qp_num);
- if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP))
- ipoib_warn(priv, "request notify on send CQ failed\n");
netif_stop_queue(dev);
+ rc = ib_req_notify_cq(priv->send_cq,
+ IB_CQ_NEXT_COMP | IB_CQ_REPORT_MISSED_EVENTS);
+ if (rc < 0)
+ ipoib_warn(priv, "request notify on send CQ failed\n");
+ else if (rc)
+ ipoib_send_comp_handler(priv->send_cq, dev);
}
}
}
#define GET_TIME(x) rdtscl(x)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "TSC"
-#elif defined(__alpha__)
+#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_TILE)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
-#define TIME_NAME "PCC"
-#elif defined(CONFIG_MN10300) || defined(CONFIG_TILE)
-#define GET_TIME(x) do { x = get_cycles(); } while (0)
-#define DELTA(x, y) ((x) - (y))
-#define TIME_NAME "TSC"
+#define TIME_NAME "get_cycles"
#else
#define FAKE_TIME
static unsigned long analog_faketime = 0;
#define TC3589x_EVT_INT_CLR 0x2
#define TC3589x_KBD_INT_CLR 0x1
-#define TC3589x_KBD_KEYMAP_SIZE 64
-
/**
* struct tc_keypad - data structure used by keypad driver
* @tc3589x: pointer to tc35893
const struct tc3589x_keypad_platform_data *board;
unsigned int krow;
unsigned int kcol;
- unsigned short keymap[TC3589x_KBD_KEYMAP_SIZE];
+ unsigned short *keymap;
bool keypad_stopped;
};
error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL,
- keypad->keymap, input);
+ NULL, input);
if (error) {
dev_err(&pdev->dev, "Failed to build keymap\n");
goto err_free_mem;
}
+ keypad->keymap = input->keycode;
+
input_set_capability(input, EV_MSC, MSC_SCAN);
if (!plat->no_autorepeat)
__set_bit(EV_REP, input->evbit);
f->y_map |= (p[5] & 0x20) << 6;
}
+static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p)
+{
+ f->first_mp = !!(p[0] & 0x02);
+ f->is_mp = !!(p[0] & 0x20);
+
+ f->fingers = ((p[0] & 0x6) >> 1 |
+ (p[0] & 0x10) >> 2);
+ f->x_map = ((p[2] & 0x60) >> 5) |
+ ((p[4] & 0x7f) << 2) |
+ ((p[5] & 0x7f) << 9) |
+ ((p[3] & 0x07) << 16) |
+ ((p[3] & 0x70) << 15) |
+ ((p[0] & 0x01) << 22);
+ f->y_map = (p[1] & 0x7f) |
+ ((p[2] & 0x1f) << 7);
+
+ f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
+ f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
+ f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
+
+ alps_decode_buttons_v3(f, p);
+}
+
static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
}
/* Bytes 2 - pktsize should have 0 in the highest bit */
- if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
+ if (priv->proto_version != ALPS_PROTO_V5 &&
+ psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
(psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
psmouse->pktcnt - 1,
return 0;
}
-static int alps_enter_command_mode(struct psmouse *psmouse,
- unsigned char *resp)
+static int alps_enter_command_mode(struct psmouse *psmouse)
{
unsigned char param[4];
return -1;
}
- if (param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) {
+ if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) &&
+ param[0] != 0x73) {
psmouse_dbg(psmouse,
"unknown response while entering command mode\n");
return -1;
}
-
- if (resp)
- *resp = param[2];
return 0;
}
{
int reg_val, ret = -1;
- if (alps_enter_command_mode(psmouse, NULL))
+ if (alps_enter_command_mode(psmouse))
return -1;
reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008);
{
int ret = -EIO, reg_val;
- if (alps_enter_command_mode(psmouse, NULL))
+ if (alps_enter_command_mode(psmouse))
goto error;
reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
* supported by this driver. If bit 1 isn't set the packet
* format is different.
*/
- if (alps_enter_command_mode(psmouse, NULL) ||
+ if (alps_enter_command_mode(psmouse) ||
alps_command_mode_write_reg(psmouse,
reg_base + 0x08, 0x82) ||
alps_exit_command_mode(psmouse))
alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO)
goto error;
- if (alps_enter_command_mode(psmouse, NULL) ||
+ if (alps_enter_command_mode(psmouse) ||
alps_absolute_mode_v3(psmouse)) {
psmouse_err(psmouse, "Failed to enter absolute mode\n");
goto error;
priv->flags &= ~ALPS_DUALPOINT;
}
- if (alps_enter_command_mode(psmouse, NULL) ||
+ if (alps_enter_command_mode(psmouse) ||
alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 ||
alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
goto error;
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[4];
- if (alps_enter_command_mode(psmouse, NULL))
+ if (alps_enter_command_mode(psmouse))
goto error;
if (alps_absolute_mode_v4(psmouse)) {
return -1;
}
+static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ unsigned char param[2];
+
+ /* This is dolphin "v1" as empirically defined by florin9doi */
+ param[0] = 0x64;
+ param[1] = 0x28;
+
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
+ ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
+ ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE))
+ return -1;
+
+ return 0;
+}
+
static void alps_set_defaults(struct alps_data *priv)
{
priv->byte0 = 0x8f;
priv->nibble_commands = alps_v4_nibble_commands;
priv->addr_command = PSMOUSE_CMD_DISABLE;
break;
+ case ALPS_PROTO_V5:
+ priv->hw_init = alps_hw_init_dolphin_v1;
+ priv->process_packet = alps_process_packet_v3;
+ priv->decode_fields = alps_decode_dolphin;
+ priv->set_abs_params = alps_set_abs_params_mt;
+ priv->nibble_commands = alps_v3_nibble_commands;
+ priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+ priv->byte0 = 0xc8;
+ priv->mask0 = 0xc8;
+ priv->flags = 0;
+ priv->x_max = 1360;
+ priv->y_max = 660;
+ priv->x_bits = 23;
+ priv->y_bits = 12;
+ break;
}
}
return -EIO;
if (alps_match_table(psmouse, priv, e7, ec) == 0) {
+ return 0;
+ } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
+ ec[0] == 0x73 && ec[1] == 0x01) {
+ priv->proto_version = ALPS_PROTO_V5;
+ alps_set_defaults(priv);
+
return 0;
} else if (ec[0] == 0x88 && ec[1] == 0x08) {
priv->proto_version = ALPS_PROTO_V3;
#define ALPS_PROTO_V2 2
#define ALPS_PROTO_V3 3
#define ALPS_PROTO_V4 4
+#define ALPS_PROTO_V5 5
/**
* struct alps_model_info - touchpad ID table
cytp->fw_version = param[2] & FW_VERSION_MASX;
cytp->tp_metrics_supported = (param[2] & TP_METRICS_MASK) ? 1 : 0;
+ /*
+ * Trackpad fw_version 11 (in Dell XPS12) yields a bogus response to
+ * CYTP_CMD_READ_TP_METRICS so do not try to use it. LP: #1103594.
+ */
+ if (cytp->fw_version >= 11)
+ cytp->tp_metrics_supported = 0;
+
psmouse_dbg(psmouse, "cytp->fw_version = %d\n", cytp->fw_version);
psmouse_dbg(psmouse, "cytp->tp_metrics_supported = %d\n",
cytp->tp_metrics_supported);
cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width;
cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high;
+ if (!cytp->tp_metrics_supported)
+ return 0;
+
memset(param, 0, sizeof(param));
if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_TP_METRICS, param) == 0) {
/* Update trackpad parameters. */
static int cypress_query_hardware(struct psmouse *psmouse)
{
- struct cytp_data *cytp = psmouse->private;
int ret;
ret = cypress_read_fw_version(psmouse);
if (ret)
return ret;
- if (cytp->tp_metrics_supported) {
- ret = cypress_read_tp_metrics(psmouse);
- if (ret)
- return ret;
- }
+ ret = cypress_read_tp_metrics(psmouse);
+ if (ret)
+ return ret;
return 0;
}
static const struct wacom_features wacom_features_0x101 =
{ "Wacom ISDv4 101", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x10D =
+ { "Wacom ISDv4 10D", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
+ 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x4001 =
{ "Wacom ISDv4 4001", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
{ USB_DEVICE_WACOM(0xEF) },
{ USB_DEVICE_WACOM(0x100) },
{ USB_DEVICE_WACOM(0x101) },
+ { USB_DEVICE_WACOM(0x10D) },
{ USB_DEVICE_WACOM(0x4001) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },
/* Must be called with ts->lock held */
static void __ads7846_enable(struct ads7846 *ts)
{
- regulator_enable(ts->reg);
+ int error;
+
+ error = regulator_enable(ts->reg);
+ if (error != 0)
+ dev_err(&ts->spi->dev, "Failed to enable supply: %d\n", error);
+
ads7846_restart(ts);
}
struct i2c_client *client = data->client;
int error;
- if (data->core_reg)
- regulator_enable(data->core_reg);
- if (data->io_reg)
- regulator_enable(data->io_reg);
+ error = regulator_enable(data->core_reg);
+ if (error) {
+ dev_err(&client->dev, "Failed to enable avdd: %d\n", error);
+ return error;
+ }
+
+ error = regulator_enable(data->io_reg);
+ if (error) {
+ dev_err(&client->dev, "Failed to enable vdd: %d\n", error);
+ regulator_disable(data->core_reg);
+ return error;
+ }
+
mdelay(MMS114_POWERON_DELAY);
error = mms114_setup_regs(data);
- if (error < 0)
+ if (error < 0) {
+ regulator_disable(data->io_reg);
+ regulator_disable(data->core_reg);
return error;
+ }
if (data->pdata->cfg_pin)
data->pdata->cfg_pin(true);
static void mms114_stop(struct mms114_data *data)
{
struct i2c_client *client = data->client;
+ int error;
disable_irq(client->irq);
if (data->pdata->cfg_pin)
data->pdata->cfg_pin(false);
- if (data->io_reg)
- regulator_disable(data->io_reg);
- if (data->core_reg)
- regulator_disable(data->core_reg);
+ error = regulator_disable(data->io_reg);
+ if (error)
+ dev_warn(&client->dev, "Failed to disable vdd: %d\n", error);
+
+ error = regulator_disable(data->core_reg);
+ if (error)
+ dev_warn(&client->dev, "Failed to disable avdd: %d\n", error);
}
static int mms114_input_open(struct input_dev *dev)
# OMAP IOMMU support
config OMAP_IOMMU
bool "OMAP IOMMU Support"
- depends on ARCH_OMAP
+ depends on ARCH_OMAP2PLUS
select IOMMU_API
config OMAP_IOVMM
/* allocate a protection domain if a device is added */
dma_domain = find_protection_domain(devid);
- if (dma_domain)
- goto out;
- dma_domain = dma_ops_domain_alloc();
- if (!dma_domain)
- goto out;
- dma_domain->target_dev = devid;
-
- spin_lock_irqsave(&iommu_pd_list_lock, flags);
- list_add_tail(&dma_domain->list, &iommu_pd_list);
- spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
-
- dev_data = get_dev_data(dev);
+ if (!dma_domain) {
+ dma_domain = dma_ops_domain_alloc();
+ if (!dma_domain)
+ goto out;
+ dma_domain->target_dev = devid;
+
+ spin_lock_irqsave(&iommu_pd_list_lock, flags);
+ list_add_tail(&dma_domain->list, &iommu_pd_list);
+ spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+ }
dev->archdata.dma_ops = &amd_iommu_dma_ops;
* BIOS should disable L2B micellaneous clock gating by setting
* L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b
*/
-static void __init amd_iommu_erratum_746_workaround(struct amd_iommu *iommu)
+static void amd_iommu_erratum_746_workaround(struct amd_iommu *iommu)
{
u32 value;
#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/cpumask.h>
#include <linux/errno.h>
#include <linux/msi.h>
#include <linux/irq.h>
The maximum number of VICs available in the system, for
power management.
+config RENESAS_INTC_IRQPIN
+ bool
+ select IRQ_DOMAIN
+
+config RENESAS_IRQC
+ bool
+ select IRQ_DOMAIN
+
config VERSATILE_FPGA_IRQ
bool
select IRQ_DOMAIN
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o
+obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o
obj-$(CONFIG_METAG) += irq-metag-ext.o
obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o
obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
obj-$(CONFIG_ARM_GIC) += irq-gic.o
obj-$(CONFIG_ARM_VIC) += irq-vic.o
+obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
+obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
+obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/mach/irq.h>
+#ifdef CONFIG_EXYNOS_ATAGS
#include <plat/cpu.h>
+#endif
#include "irqchip.h"
#define COMBINER_ENABLE_CLEAR 0x4
#define COMBINER_INT_STATUS 0xC
+#define IRQ_IN_COMBINER 8
+
static DEFINE_SPINLOCK(irq_controller_lock);
struct combiner_chip_data {
- unsigned int irq_offset;
+ unsigned int hwirq_offset;
unsigned int irq_mask;
void __iomem *base;
+ unsigned int parent_irq;
};
static struct irq_domain *combiner_irq_domain;
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
static inline void __iomem *combiner_base(struct irq_data *data)
{
if (status == 0)
goto out;
- combiner_irq = __ffs(status);
+ combiner_irq = chip_data->hwirq_offset + __ffs(status);
+ cascade_irq = irq_find_mapping(combiner_irq_domain, combiner_irq);
- cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
- if (unlikely(cascade_irq >= NR_IRQS))
- do_bad_IRQ(cascade_irq, desc);
+ if (unlikely(!cascade_irq))
+ do_bad_IRQ(irq, desc);
else
generic_handle_irq(cascade_irq);
chained_irq_exit(chip, desc);
}
-static struct irq_chip combiner_chip = {
- .name = "COMBINER",
- .irq_mask = combiner_mask_irq,
- .irq_unmask = combiner_unmask_irq,
-};
-
-static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+#ifdef CONFIG_SMP
+static int combiner_set_affinity(struct irq_data *d,
+ const struct cpumask *mask_val, bool force)
{
- unsigned int max_nr;
+ struct combiner_chip_data *chip_data = irq_data_get_irq_chip_data(d);
+ struct irq_chip *chip = irq_get_chip(chip_data->parent_irq);
+ struct irq_data *data = irq_get_irq_data(chip_data->parent_irq);
- if (soc_is_exynos5250())
- max_nr = EXYNOS5_MAX_COMBINER_NR;
+ if (chip && chip->irq_set_affinity)
+ return chip->irq_set_affinity(data, mask_val, force);
else
- max_nr = EXYNOS4_MAX_COMBINER_NR;
+ return -EINVAL;
+}
+#endif
- if (combiner_nr >= max_nr)
- BUG();
- if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+static struct irq_chip combiner_chip = {
+ .name = "COMBINER",
+ .irq_mask = combiner_mask_irq,
+ .irq_unmask = combiner_unmask_irq,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = combiner_set_affinity,
+#endif
+};
+
+static void __init combiner_cascade_irq(struct combiner_chip_data *combiner_data,
+ unsigned int irq)
+{
+ if (irq_set_handler_data(irq, combiner_data) != 0)
BUG();
irq_set_chained_handler(irq, combiner_handle_cascade_irq);
}
-static void __init combiner_init_one(unsigned int combiner_nr,
- void __iomem *base)
+static void __init combiner_init_one(struct combiner_chip_data *combiner_data,
+ unsigned int combiner_nr,
+ void __iomem *base, unsigned int irq)
{
- combiner_data[combiner_nr].base = base;
- combiner_data[combiner_nr].irq_offset = irq_find_mapping(
- combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
- combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+ combiner_data->base = base;
+ combiner_data->hwirq_offset = (combiner_nr & ~3) * IRQ_IN_COMBINER;
+ combiner_data->irq_mask = 0xff << ((combiner_nr % 4) << 3);
+ combiner_data->parent_irq = irq;
/* Disable all interrupts */
- __raw_writel(combiner_data[combiner_nr].irq_mask,
- base + COMBINER_ENABLE_CLEAR);
+ __raw_writel(combiner_data->irq_mask, base + COMBINER_ENABLE_CLEAR);
}
#ifdef CONFIG_OF
if (intsize < 2)
return -EINVAL;
- *out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
+ *out_hwirq = intspec[0] * IRQ_IN_COMBINER + intspec[1];
*out_type = 0;
return 0;
static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
+ struct combiner_chip_data *combiner_data = d->host_data;
+
irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
irq_set_chip_data(irq, &combiner_data[hw >> 3]);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
.map = combiner_irq_domain_map,
};
-void __init combiner_init(void __iomem *combiner_base,
- struct device_node *np)
+static unsigned int combiner_lookup_irq(int group)
{
- int i, irq, irq_base;
- unsigned int max_nr, nr_irq;
-
- if (np) {
- if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
- pr_warning("%s: number of combiners not specified, "
- "setting default as %d.\n",
- __func__, EXYNOS4_MAX_COMBINER_NR);
- max_nr = EXYNOS4_MAX_COMBINER_NR;
- }
- } else {
- max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
- EXYNOS4_MAX_COMBINER_NR;
+#ifdef CONFIG_EXYNOS_ATAGS
+ if (group < EXYNOS4210_MAX_COMBINER_NR || soc_is_exynos5250())
+ return IRQ_SPI(group);
+
+ switch (group) {
+ case 16:
+ return IRQ_SPI(107);
+ case 17:
+ return IRQ_SPI(108);
+ case 18:
+ return IRQ_SPI(48);
+ case 19:
+ return IRQ_SPI(42);
}
- nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
+#endif
+ return 0;
+}
+
+void __init combiner_init(void __iomem *combiner_base,
+ struct device_node *np,
+ unsigned int max_nr,
+ int irq_base)
+{
+ int i, irq;
+ unsigned int nr_irq;
+ struct combiner_chip_data *combiner_data;
+
+ nr_irq = max_nr * IRQ_IN_COMBINER;
- irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
- if (IS_ERR_VALUE(irq_base)) {
- irq_base = COMBINER_IRQ(0, 0);
- pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
+ combiner_data = kcalloc(max_nr, sizeof (*combiner_data), GFP_KERNEL);
+ if (!combiner_data) {
+ pr_warning("%s: could not allocate combiner data\n", __func__);
+ return;
}
- combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
- &combiner_irq_domain_ops, &combiner_data);
+ combiner_irq_domain = irq_domain_add_simple(np, nr_irq, irq_base,
+ &combiner_irq_domain_ops, combiner_data);
if (WARN_ON(!combiner_irq_domain)) {
pr_warning("%s: irq domain init failed\n", __func__);
return;
}
for (i = 0; i < max_nr; i++) {
- combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
- irq = IRQ_SPI(i);
#ifdef CONFIG_OF
if (np)
irq = irq_of_parse_and_map(np, i);
+ else
#endif
- combiner_cascade_irq(i, irq);
+ irq = combiner_lookup_irq(i);
+
+ combiner_init_one(&combiner_data[i], i,
+ combiner_base + (i >> 2) * 0x10, irq);
+ combiner_cascade_irq(&combiner_data[i], irq);
}
}
struct device_node *parent)
{
void __iomem *combiner_base;
+ unsigned int max_nr = 20;
+ int irq_base = -1;
combiner_base = of_iomap(np, 0);
if (!combiner_base) {
return -ENXIO;
}
- combiner_init(combiner_base, np);
+ if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
+ pr_info("%s: number of combiners not specified, "
+ "setting default as %d.\n",
+ __func__, max_nr);
+ }
+
+ /*
+ * FIXME: This is a hardwired COMBINER_IRQ(0,0). Once all devices
+ * get their IRQ from DT, remove this in order to get dynamic
+ * allocation.
+ */
+ irq_base = 160;
+
+ combiner_init(combiner_base, np, max_nr, irq_base);
return 0;
}
/* Convert our logical CPU mask into a physical one. */
for_each_cpu(cpu, mask)
- map |= 1 << cpu_logical_map(cpu);
+ map |= gic_cpu_map[cpu];
/*
* Ensure that stores to Normal memory are visible to the
--- /dev/null
+/*
+ * Renesas INTC External IRQ Pin Driver
+ *
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_data/irq-renesas-intc-irqpin.h>
+
+#define INTC_IRQPIN_MAX 8 /* maximum 8 interrupts per driver instance */
+
+#define INTC_IRQPIN_REG_SENSE 0 /* ICRn */
+#define INTC_IRQPIN_REG_PRIO 1 /* INTPRInn */
+#define INTC_IRQPIN_REG_SOURCE 2 /* INTREQnn */
+#define INTC_IRQPIN_REG_MASK 3 /* INTMSKnn */
+#define INTC_IRQPIN_REG_CLEAR 4 /* INTMSKCLRnn */
+#define INTC_IRQPIN_REG_NR 5
+
+/* INTC external IRQ PIN hardware register access:
+ *
+ * SENSE is read-write 32-bit with 2-bits or 4-bits per IRQ (*)
+ * PRIO is read-write 32-bit with 4-bits per IRQ (**)
+ * SOURCE is read-only 32-bit or 8-bit with 1-bit per IRQ (***)
+ * MASK is write-only 32-bit or 8-bit with 1-bit per IRQ (***)
+ * CLEAR is write-only 32-bit or 8-bit with 1-bit per IRQ (***)
+ *
+ * (*) May be accessed by more than one driver instance - lock needed
+ * (**) Read-modify-write access by one driver instance - lock needed
+ * (***) Accessed by one driver instance only - no locking needed
+ */
+
+struct intc_irqpin_iomem {
+ void __iomem *iomem;
+ unsigned long (*read)(void __iomem *iomem);
+ void (*write)(void __iomem *iomem, unsigned long data);
+ int width;
+};
+
+struct intc_irqpin_irq {
+ int hw_irq;
+ int requested_irq;
+ int domain_irq;
+ struct intc_irqpin_priv *p;
+};
+
+struct intc_irqpin_priv {
+ struct intc_irqpin_iomem iomem[INTC_IRQPIN_REG_NR];
+ struct intc_irqpin_irq irq[INTC_IRQPIN_MAX];
+ struct renesas_intc_irqpin_config config;
+ unsigned int number_of_irqs;
+ struct platform_device *pdev;
+ struct irq_chip irq_chip;
+ struct irq_domain *irq_domain;
+ bool shared_irqs;
+ u8 shared_irq_mask;
+};
+
+static unsigned long intc_irqpin_read32(void __iomem *iomem)
+{
+ return ioread32(iomem);
+}
+
+static unsigned long intc_irqpin_read8(void __iomem *iomem)
+{
+ return ioread8(iomem);
+}
+
+static void intc_irqpin_write32(void __iomem *iomem, unsigned long data)
+{
+ iowrite32(data, iomem);
+}
+
+static void intc_irqpin_write8(void __iomem *iomem, unsigned long data)
+{
+ iowrite8(data, iomem);
+}
+
+static inline unsigned long intc_irqpin_read(struct intc_irqpin_priv *p,
+ int reg)
+{
+ struct intc_irqpin_iomem *i = &p->iomem[reg];
+
+ return i->read(i->iomem);
+}
+
+static inline void intc_irqpin_write(struct intc_irqpin_priv *p,
+ int reg, unsigned long data)
+{
+ struct intc_irqpin_iomem *i = &p->iomem[reg];
+
+ i->write(i->iomem, data);
+}
+
+static inline unsigned long intc_irqpin_hwirq_mask(struct intc_irqpin_priv *p,
+ int reg, int hw_irq)
+{
+ return BIT((p->iomem[reg].width - 1) - hw_irq);
+}
+
+static inline void intc_irqpin_irq_write_hwirq(struct intc_irqpin_priv *p,
+ int reg, int hw_irq)
+{
+ intc_irqpin_write(p, reg, intc_irqpin_hwirq_mask(p, reg, hw_irq));
+}
+
+static DEFINE_RAW_SPINLOCK(intc_irqpin_lock); /* only used by slow path */
+
+static void intc_irqpin_read_modify_write(struct intc_irqpin_priv *p,
+ int reg, int shift,
+ int width, int value)
+{
+ unsigned long flags;
+ unsigned long tmp;
+
+ raw_spin_lock_irqsave(&intc_irqpin_lock, flags);
+
+ tmp = intc_irqpin_read(p, reg);
+ tmp &= ~(((1 << width) - 1) << shift);
+ tmp |= value << shift;
+ intc_irqpin_write(p, reg, tmp);
+
+ raw_spin_unlock_irqrestore(&intc_irqpin_lock, flags);
+}
+
+static void intc_irqpin_mask_unmask_prio(struct intc_irqpin_priv *p,
+ int irq, int do_mask)
+{
+ int bitfield_width = 4; /* PRIO assumed to have fixed bitfield width */
+ int shift = (7 - irq) * bitfield_width; /* PRIO assumed to be 32-bit */
+
+ intc_irqpin_read_modify_write(p, INTC_IRQPIN_REG_PRIO,
+ shift, bitfield_width,
+ do_mask ? 0 : (1 << bitfield_width) - 1);
+}
+
+static int intc_irqpin_set_sense(struct intc_irqpin_priv *p, int irq, int value)
+{
+ int bitfield_width = p->config.sense_bitfield_width;
+ int shift = (7 - irq) * bitfield_width; /* SENSE assumed to be 32-bit */
+
+ dev_dbg(&p->pdev->dev, "sense irq = %d, mode = %d\n", irq, value);
+
+ if (value >= (1 << bitfield_width))
+ return -EINVAL;
+
+ intc_irqpin_read_modify_write(p, INTC_IRQPIN_REG_SENSE, shift,
+ bitfield_width, value);
+ return 0;
+}
+
+static void intc_irqpin_dbg(struct intc_irqpin_irq *i, char *str)
+{
+ dev_dbg(&i->p->pdev->dev, "%s (%d:%d:%d)\n",
+ str, i->requested_irq, i->hw_irq, i->domain_irq);
+}
+
+static void intc_irqpin_irq_enable(struct irq_data *d)
+{
+ struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d);
+ int hw_irq = irqd_to_hwirq(d);
+
+ intc_irqpin_dbg(&p->irq[hw_irq], "enable");
+ intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_CLEAR, hw_irq);
+}
+
+static void intc_irqpin_irq_disable(struct irq_data *d)
+{
+ struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d);
+ int hw_irq = irqd_to_hwirq(d);
+
+ intc_irqpin_dbg(&p->irq[hw_irq], "disable");
+ intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_MASK, hw_irq);
+}
+
+static void intc_irqpin_shared_irq_enable(struct irq_data *d)
+{
+ struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d);
+ int hw_irq = irqd_to_hwirq(d);
+
+ intc_irqpin_dbg(&p->irq[hw_irq], "shared enable");
+ intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_CLEAR, hw_irq);
+
+ p->shared_irq_mask &= ~BIT(hw_irq);
+}
+
+static void intc_irqpin_shared_irq_disable(struct irq_data *d)
+{
+ struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d);
+ int hw_irq = irqd_to_hwirq(d);
+
+ intc_irqpin_dbg(&p->irq[hw_irq], "shared disable");
+ intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_MASK, hw_irq);
+
+ p->shared_irq_mask |= BIT(hw_irq);
+}
+
+static void intc_irqpin_irq_enable_force(struct irq_data *d)
+{
+ struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d);
+ int irq = p->irq[irqd_to_hwirq(d)].requested_irq;
+
+ intc_irqpin_irq_enable(d);
+
+ /* enable interrupt through parent interrupt controller,
+ * assumes non-shared interrupt with 1:1 mapping
+ * needed for busted IRQs on some SoCs like sh73a0
+ */
+ irq_get_chip(irq)->irq_unmask(irq_get_irq_data(irq));
+}
+
+static void intc_irqpin_irq_disable_force(struct irq_data *d)
+{
+ struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d);
+ int irq = p->irq[irqd_to_hwirq(d)].requested_irq;
+
+ /* disable interrupt through parent interrupt controller,
+ * assumes non-shared interrupt with 1:1 mapping
+ * needed for busted IRQs on some SoCs like sh73a0
+ */
+ irq_get_chip(irq)->irq_mask(irq_get_irq_data(irq));
+ intc_irqpin_irq_disable(d);
+}
+
+#define INTC_IRQ_SENSE_VALID 0x10
+#define INTC_IRQ_SENSE(x) (x + INTC_IRQ_SENSE_VALID)
+
+static unsigned char intc_irqpin_sense[IRQ_TYPE_SENSE_MASK + 1] = {
+ [IRQ_TYPE_EDGE_FALLING] = INTC_IRQ_SENSE(0x00),
+ [IRQ_TYPE_EDGE_RISING] = INTC_IRQ_SENSE(0x01),
+ [IRQ_TYPE_LEVEL_LOW] = INTC_IRQ_SENSE(0x02),
+ [IRQ_TYPE_LEVEL_HIGH] = INTC_IRQ_SENSE(0x03),
+ [IRQ_TYPE_EDGE_BOTH] = INTC_IRQ_SENSE(0x04),
+};
+
+static int intc_irqpin_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ unsigned char value = intc_irqpin_sense[type & IRQ_TYPE_SENSE_MASK];
+ struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d);
+
+ if (!(value & INTC_IRQ_SENSE_VALID))
+ return -EINVAL;
+
+ return intc_irqpin_set_sense(p, irqd_to_hwirq(d),
+ value ^ INTC_IRQ_SENSE_VALID);
+}
+
+static irqreturn_t intc_irqpin_irq_handler(int irq, void *dev_id)
+{
+ struct intc_irqpin_irq *i = dev_id;
+ struct intc_irqpin_priv *p = i->p;
+ unsigned long bit;
+
+ intc_irqpin_dbg(i, "demux1");
+ bit = intc_irqpin_hwirq_mask(p, INTC_IRQPIN_REG_SOURCE, i->hw_irq);
+
+ if (intc_irqpin_read(p, INTC_IRQPIN_REG_SOURCE) & bit) {
+ intc_irqpin_write(p, INTC_IRQPIN_REG_SOURCE, ~bit);
+ intc_irqpin_dbg(i, "demux2");
+ generic_handle_irq(i->domain_irq);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static irqreturn_t intc_irqpin_shared_irq_handler(int irq, void *dev_id)
+{
+ struct intc_irqpin_priv *p = dev_id;
+ unsigned int reg_source = intc_irqpin_read(p, INTC_IRQPIN_REG_SOURCE);
+ irqreturn_t status = IRQ_NONE;
+ int k;
+
+ for (k = 0; k < 8; k++) {
+ if (reg_source & BIT(7 - k)) {
+ if (BIT(k) & p->shared_irq_mask)
+ continue;
+
+ status |= intc_irqpin_irq_handler(irq, &p->irq[k]);
+ }
+ }
+
+ return status;
+}
+
+static int intc_irqpin_irq_domain_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct intc_irqpin_priv *p = h->host_data;
+
+ p->irq[hw].domain_irq = virq;
+ p->irq[hw].hw_irq = hw;
+
+ intc_irqpin_dbg(&p->irq[hw], "map");
+ irq_set_chip_data(virq, h->host_data);
+ irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq);
+ set_irq_flags(virq, IRQF_VALID); /* kill me now */
+ return 0;
+}
+
+static struct irq_domain_ops intc_irqpin_irq_domain_ops = {
+ .map = intc_irqpin_irq_domain_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static int intc_irqpin_probe(struct platform_device *pdev)
+{
+ struct renesas_intc_irqpin_config *pdata = pdev->dev.platform_data;
+ struct intc_irqpin_priv *p;
+ struct intc_irqpin_iomem *i;
+ struct resource *io[INTC_IRQPIN_REG_NR];
+ struct resource *irq;
+ struct irq_chip *irq_chip;
+ void (*enable_fn)(struct irq_data *d);
+ void (*disable_fn)(struct irq_data *d);
+ const char *name = dev_name(&pdev->dev);
+ int ref_irq;
+ int ret;
+ int k;
+
+ p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+ if (!p) {
+ dev_err(&pdev->dev, "failed to allocate driver data\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ /* deal with driver instance configuration */
+ if (pdata)
+ memcpy(&p->config, pdata, sizeof(*pdata));
+ if (!p->config.sense_bitfield_width)
+ p->config.sense_bitfield_width = 4; /* default to 4 bits */
+
+ p->pdev = pdev;
+ platform_set_drvdata(pdev, p);
+
+ /* get hold of manadatory IOMEM */
+ for (k = 0; k < INTC_IRQPIN_REG_NR; k++) {
+ io[k] = platform_get_resource(pdev, IORESOURCE_MEM, k);
+ if (!io[k]) {
+ dev_err(&pdev->dev, "not enough IOMEM resources\n");
+ ret = -EINVAL;
+ goto err0;
+ }
+ }
+
+ /* allow any number of IRQs between 1 and INTC_IRQPIN_MAX */
+ for (k = 0; k < INTC_IRQPIN_MAX; k++) {
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, k);
+ if (!irq)
+ break;
+
+ p->irq[k].p = p;
+ p->irq[k].requested_irq = irq->start;
+ }
+
+ p->number_of_irqs = k;
+ if (p->number_of_irqs < 1) {
+ dev_err(&pdev->dev, "not enough IRQ resources\n");
+ ret = -EINVAL;
+ goto err0;
+ }
+
+ /* ioremap IOMEM and setup read/write callbacks */
+ for (k = 0; k < INTC_IRQPIN_REG_NR; k++) {
+ i = &p->iomem[k];
+
+ switch (resource_size(io[k])) {
+ case 1:
+ i->width = 8;
+ i->read = intc_irqpin_read8;
+ i->write = intc_irqpin_write8;
+ break;
+ case 4:
+ i->width = 32;
+ i->read = intc_irqpin_read32;
+ i->write = intc_irqpin_write32;
+ break;
+ default:
+ dev_err(&pdev->dev, "IOMEM size mismatch\n");
+ ret = -EINVAL;
+ goto err0;
+ }
+
+ i->iomem = devm_ioremap_nocache(&pdev->dev, io[k]->start,
+ resource_size(io[k]));
+ if (!i->iomem) {
+ dev_err(&pdev->dev, "failed to remap IOMEM\n");
+ ret = -ENXIO;
+ goto err0;
+ }
+ }
+
+ /* mask all interrupts using priority */
+ for (k = 0; k < p->number_of_irqs; k++)
+ intc_irqpin_mask_unmask_prio(p, k, 1);
+
+ /* clear all pending interrupts */
+ intc_irqpin_write(p, INTC_IRQPIN_REG_SOURCE, 0x0);
+
+ /* scan for shared interrupt lines */
+ ref_irq = p->irq[0].requested_irq;
+ p->shared_irqs = true;
+ for (k = 1; k < p->number_of_irqs; k++) {
+ if (ref_irq != p->irq[k].requested_irq) {
+ p->shared_irqs = false;
+ break;
+ }
+ }
+
+ /* use more severe masking method if requested */
+ if (p->config.control_parent) {
+ enable_fn = intc_irqpin_irq_enable_force;
+ disable_fn = intc_irqpin_irq_disable_force;
+ } else if (!p->shared_irqs) {
+ enable_fn = intc_irqpin_irq_enable;
+ disable_fn = intc_irqpin_irq_disable;
+ } else {
+ enable_fn = intc_irqpin_shared_irq_enable;
+ disable_fn = intc_irqpin_shared_irq_disable;
+ }
+
+ irq_chip = &p->irq_chip;
+ irq_chip->name = name;
+ irq_chip->irq_mask = disable_fn;
+ irq_chip->irq_unmask = enable_fn;
+ irq_chip->irq_enable = enable_fn;
+ irq_chip->irq_disable = disable_fn;
+ irq_chip->irq_set_type = intc_irqpin_irq_set_type;
+ irq_chip->flags = IRQCHIP_SKIP_SET_WAKE;
+
+ p->irq_domain = irq_domain_add_simple(pdev->dev.of_node,
+ p->number_of_irqs,
+ p->config.irq_base,
+ &intc_irqpin_irq_domain_ops, p);
+ if (!p->irq_domain) {
+ ret = -ENXIO;
+ dev_err(&pdev->dev, "cannot initialize irq domain\n");
+ goto err0;
+ }
+
+ if (p->shared_irqs) {
+ /* request one shared interrupt */
+ if (devm_request_irq(&pdev->dev, p->irq[0].requested_irq,
+ intc_irqpin_shared_irq_handler,
+ IRQF_SHARED, name, p)) {
+ dev_err(&pdev->dev, "failed to request low IRQ\n");
+ ret = -ENOENT;
+ goto err1;
+ }
+ } else {
+ /* request interrupts one by one */
+ for (k = 0; k < p->number_of_irqs; k++) {
+ if (devm_request_irq(&pdev->dev,
+ p->irq[k].requested_irq,
+ intc_irqpin_irq_handler,
+ 0, name, &p->irq[k])) {
+ dev_err(&pdev->dev,
+ "failed to request low IRQ\n");
+ ret = -ENOENT;
+ goto err1;
+ }
+ }
+ }
+
+ /* unmask all interrupts on prio level */
+ for (k = 0; k < p->number_of_irqs; k++)
+ intc_irqpin_mask_unmask_prio(p, k, 0);
+
+ dev_info(&pdev->dev, "driving %d irqs\n", p->number_of_irqs);
+
+ /* warn in case of mismatch if irq base is specified */
+ if (p->config.irq_base) {
+ if (p->config.irq_base != p->irq[0].domain_irq)
+ dev_warn(&pdev->dev, "irq base mismatch (%d/%d)\n",
+ p->config.irq_base, p->irq[0].domain_irq);
+ }
+
+ return 0;
+
+err1:
+ irq_domain_remove(p->irq_domain);
+err0:
+ return ret;
+}
+
+static int intc_irqpin_remove(struct platform_device *pdev)
+{
+ struct intc_irqpin_priv *p = platform_get_drvdata(pdev);
+
+ irq_domain_remove(p->irq_domain);
+
+ return 0;
+}
+
+static const struct of_device_id intc_irqpin_dt_ids[] = {
+ { .compatible = "renesas,intc-irqpin", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, intc_irqpin_dt_ids);
+
+static struct platform_driver intc_irqpin_device_driver = {
+ .probe = intc_irqpin_probe,
+ .remove = intc_irqpin_remove,
+ .driver = {
+ .name = "renesas_intc_irqpin",
+ .of_match_table = intc_irqpin_dt_ids,
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init intc_irqpin_init(void)
+{
+ return platform_driver_register(&intc_irqpin_device_driver);
+}
+postcore_initcall(intc_irqpin_init);
+
+static void __exit intc_irqpin_exit(void)
+{
+ platform_driver_unregister(&intc_irqpin_device_driver);
+}
+module_exit(intc_irqpin_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Renesas INTC External IRQ Pin Driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * Renesas IRQC Driver
+ *
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_data/irq-renesas-irqc.h>
+
+#define IRQC_IRQ_MAX 32 /* maximum 32 interrupts per driver instance */
+
+#define IRQC_REQ_STS 0x00
+#define IRQC_EN_STS 0x04
+#define IRQC_EN_SET 0x08
+#define IRQC_INT_CPU_BASE(n) (0x000 + ((n) * 0x10))
+#define DETECT_STATUS 0x100
+#define IRQC_CONFIG(n) (0x180 + ((n) * 0x04))
+
+struct irqc_irq {
+ int hw_irq;
+ int requested_irq;
+ int domain_irq;
+ struct irqc_priv *p;
+};
+
+struct irqc_priv {
+ void __iomem *iomem;
+ void __iomem *cpu_int_base;
+ struct irqc_irq irq[IRQC_IRQ_MAX];
+ struct renesas_irqc_config config;
+ unsigned int number_of_irqs;
+ struct platform_device *pdev;
+ struct irq_chip irq_chip;
+ struct irq_domain *irq_domain;
+};
+
+static void irqc_dbg(struct irqc_irq *i, char *str)
+{
+ dev_dbg(&i->p->pdev->dev, "%s (%d:%d:%d)\n",
+ str, i->requested_irq, i->hw_irq, i->domain_irq);
+}
+
+static void irqc_irq_enable(struct irq_data *d)
+{
+ struct irqc_priv *p = irq_data_get_irq_chip_data(d);
+ int hw_irq = irqd_to_hwirq(d);
+
+ irqc_dbg(&p->irq[hw_irq], "enable");
+ iowrite32(BIT(hw_irq), p->cpu_int_base + IRQC_EN_SET);
+}
+
+static void irqc_irq_disable(struct irq_data *d)
+{
+ struct irqc_priv *p = irq_data_get_irq_chip_data(d);
+ int hw_irq = irqd_to_hwirq(d);
+
+ irqc_dbg(&p->irq[hw_irq], "disable");
+ iowrite32(BIT(hw_irq), p->cpu_int_base + IRQC_EN_STS);
+}
+
+#define INTC_IRQ_SENSE_VALID 0x10
+#define INTC_IRQ_SENSE(x) (x + INTC_IRQ_SENSE_VALID)
+
+static unsigned char irqc_sense[IRQ_TYPE_SENSE_MASK + 1] = {
+ [IRQ_TYPE_LEVEL_LOW] = INTC_IRQ_SENSE(0x01),
+ [IRQ_TYPE_LEVEL_HIGH] = INTC_IRQ_SENSE(0x02),
+ [IRQ_TYPE_EDGE_FALLING] = INTC_IRQ_SENSE(0x04), /* Synchronous */
+ [IRQ_TYPE_EDGE_RISING] = INTC_IRQ_SENSE(0x08), /* Synchronous */
+ [IRQ_TYPE_EDGE_BOTH] = INTC_IRQ_SENSE(0x0c), /* Synchronous */
+};
+
+static int irqc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ struct irqc_priv *p = irq_data_get_irq_chip_data(d);
+ int hw_irq = irqd_to_hwirq(d);
+ unsigned char value = irqc_sense[type & IRQ_TYPE_SENSE_MASK];
+ unsigned long tmp;
+
+ irqc_dbg(&p->irq[hw_irq], "sense");
+
+ if (!(value & INTC_IRQ_SENSE_VALID))
+ return -EINVAL;
+
+ tmp = ioread32(p->iomem + IRQC_CONFIG(hw_irq));
+ tmp &= ~0x3f;
+ tmp |= value ^ INTC_IRQ_SENSE_VALID;
+ iowrite32(tmp, p->iomem + IRQC_CONFIG(hw_irq));
+ return 0;
+}
+
+static irqreturn_t irqc_irq_handler(int irq, void *dev_id)
+{
+ struct irqc_irq *i = dev_id;
+ struct irqc_priv *p = i->p;
+ unsigned long bit = BIT(i->hw_irq);
+
+ irqc_dbg(i, "demux1");
+
+ if (ioread32(p->iomem + DETECT_STATUS) & bit) {
+ iowrite32(bit, p->iomem + DETECT_STATUS);
+ irqc_dbg(i, "demux2");
+ generic_handle_irq(i->domain_irq);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static int irqc_irq_domain_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct irqc_priv *p = h->host_data;
+
+ p->irq[hw].domain_irq = virq;
+ p->irq[hw].hw_irq = hw;
+
+ irqc_dbg(&p->irq[hw], "map");
+ irq_set_chip_data(virq, h->host_data);
+ irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq);
+ set_irq_flags(virq, IRQF_VALID); /* kill me now */
+ return 0;
+}
+
+static struct irq_domain_ops irqc_irq_domain_ops = {
+ .map = irqc_irq_domain_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static int irqc_probe(struct platform_device *pdev)
+{
+ struct renesas_irqc_config *pdata = pdev->dev.platform_data;
+ struct irqc_priv *p;
+ struct resource *io;
+ struct resource *irq;
+ struct irq_chip *irq_chip;
+ const char *name = dev_name(&pdev->dev);
+ int ret;
+ int k;
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p) {
+ dev_err(&pdev->dev, "failed to allocate driver data\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ /* deal with driver instance configuration */
+ if (pdata)
+ memcpy(&p->config, pdata, sizeof(*pdata));
+
+ p->pdev = pdev;
+ platform_set_drvdata(pdev, p);
+
+ /* get hold of manadatory IOMEM */
+ io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!io) {
+ dev_err(&pdev->dev, "not enough IOMEM resources\n");
+ ret = -EINVAL;
+ goto err1;
+ }
+
+ /* allow any number of IRQs between 1 and IRQC_IRQ_MAX */
+ for (k = 0; k < IRQC_IRQ_MAX; k++) {
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, k);
+ if (!irq)
+ break;
+
+ p->irq[k].p = p;
+ p->irq[k].requested_irq = irq->start;
+ }
+
+ p->number_of_irqs = k;
+ if (p->number_of_irqs < 1) {
+ dev_err(&pdev->dev, "not enough IRQ resources\n");
+ ret = -EINVAL;
+ goto err1;
+ }
+
+ /* ioremap IOMEM and setup read/write callbacks */
+ p->iomem = ioremap_nocache(io->start, resource_size(io));
+ if (!p->iomem) {
+ dev_err(&pdev->dev, "failed to remap IOMEM\n");
+ ret = -ENXIO;
+ goto err2;
+ }
+
+ p->cpu_int_base = p->iomem + IRQC_INT_CPU_BASE(0); /* SYS-SPI */
+
+ irq_chip = &p->irq_chip;
+ irq_chip->name = name;
+ irq_chip->irq_mask = irqc_irq_disable;
+ irq_chip->irq_unmask = irqc_irq_enable;
+ irq_chip->irq_enable = irqc_irq_enable;
+ irq_chip->irq_disable = irqc_irq_disable;
+ irq_chip->irq_set_type = irqc_irq_set_type;
+ irq_chip->flags = IRQCHIP_SKIP_SET_WAKE;
+
+ p->irq_domain = irq_domain_add_simple(pdev->dev.of_node,
+ p->number_of_irqs,
+ p->config.irq_base,
+ &irqc_irq_domain_ops, p);
+ if (!p->irq_domain) {
+ ret = -ENXIO;
+ dev_err(&pdev->dev, "cannot initialize irq domain\n");
+ goto err2;
+ }
+
+ /* request interrupts one by one */
+ for (k = 0; k < p->number_of_irqs; k++) {
+ if (request_irq(p->irq[k].requested_irq, irqc_irq_handler,
+ 0, name, &p->irq[k])) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ ret = -ENOENT;
+ goto err3;
+ }
+ }
+
+ dev_info(&pdev->dev, "driving %d irqs\n", p->number_of_irqs);
+
+ /* warn in case of mismatch if irq base is specified */
+ if (p->config.irq_base) {
+ if (p->config.irq_base != p->irq[0].domain_irq)
+ dev_warn(&pdev->dev, "irq base mismatch (%d/%d)\n",
+ p->config.irq_base, p->irq[0].domain_irq);
+ }
+
+ return 0;
+err3:
+ for (; k >= 0; k--)
+ free_irq(p->irq[k - 1].requested_irq, &p->irq[k - 1]);
+
+ irq_domain_remove(p->irq_domain);
+err2:
+ iounmap(p->iomem);
+err1:
+ kfree(p);
+err0:
+ return ret;
+}
+
+static int irqc_remove(struct platform_device *pdev)
+{
+ struct irqc_priv *p = platform_get_drvdata(pdev);
+ int k;
+
+ for (k = 0; k < p->number_of_irqs; k++)
+ free_irq(p->irq[k].requested_irq, &p->irq[k]);
+
+ irq_domain_remove(p->irq_domain);
+ iounmap(p->iomem);
+ kfree(p);
+ return 0;
+}
+
+static const struct of_device_id irqc_dt_ids[] = {
+ { .compatible = "renesas,irqc", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, irqc_dt_ids);
+
+static struct platform_driver irqc_device_driver = {
+ .probe = irqc_probe,
+ .remove = irqc_remove,
+ .driver = {
+ .name = "renesas_irqc",
+ .of_match_table = irqc_dt_ids,
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init irqc_init(void)
+{
+ return platform_driver_register(&irqc_device_driver);
+}
+postcore_initcall(irqc_init);
+
+static void __exit irqc_exit(void)
+{
+ platform_driver_unregister(&irqc_device_driver);
+}
+module_exit(irqc_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Renesas IRQC Driver");
+MODULE_LICENSE("GPL v2");
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <asm/exception.h>
#include <asm/mach/irq.h>
#include <mach/regs-irq.h>
#include <plat/cpu.h>
#include <plat/regs-irqtype.h>
#include <plat/pm.h>
-#include <plat/irq.h>
+
+#include "irqchip.h"
#define S3C_IRQTYPE_NONE 0
#define S3C_IRQTYPE_EINT 1
struct s3c_irq_data {
unsigned int type;
+ unsigned long offset;
unsigned long parent_irq;
/* data gets filled during init */
struct s3c_irq_data *irqs;
};
+/*
+ * Array holding pointers to the global controller structs
+ * [0] ... main_intc
+ * [1] ... sub_intc
+ * [2] ... main_intc2 on s3c2416
+ */
+static struct s3c_irq_intc *s3c_intc[3];
+
static void s3c_irq_mask(struct irq_data *data)
{
- struct s3c_irq_intc *intc = data->domain->host_data;
+ struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
+ struct s3c_irq_intc *intc = irq_data->intc;
struct s3c_irq_intc *parent_intc = intc->parent;
- struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
struct s3c_irq_data *parent_data;
unsigned long mask;
unsigned int irqno;
mask = __raw_readl(intc->reg_mask);
- mask |= (1UL << data->hwirq);
+ mask |= (1UL << irq_data->offset);
__raw_writel(mask, intc->reg_mask);
- if (parent_intc && irq_data->parent_irq) {
+ if (parent_intc) {
parent_data = &parent_intc->irqs[irq_data->parent_irq];
- /* check to see if we need to mask the parent IRQ */
+ /* check to see if we need to mask the parent IRQ
+ * The parent_irq is always in main_intc, so the hwirq
+ * for find_mapping does not need an offset in any case.
+ */
if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
irqno = irq_find_mapping(parent_intc->domain,
irq_data->parent_irq);
static void s3c_irq_unmask(struct irq_data *data)
{
- struct s3c_irq_intc *intc = data->domain->host_data;
+ struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
+ struct s3c_irq_intc *intc = irq_data->intc;
struct s3c_irq_intc *parent_intc = intc->parent;
- struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
unsigned long mask;
unsigned int irqno;
mask = __raw_readl(intc->reg_mask);
- mask &= ~(1UL << data->hwirq);
+ mask &= ~(1UL << irq_data->offset);
__raw_writel(mask, intc->reg_mask);
- if (parent_intc && irq_data->parent_irq) {
+ if (parent_intc) {
irqno = irq_find_mapping(parent_intc->domain,
irq_data->parent_irq);
s3c_irq_unmask(irq_get_irq_data(irqno));
static inline void s3c_irq_ack(struct irq_data *data)
{
- struct s3c_irq_intc *intc = data->domain->host_data;
- unsigned long bitval = 1UL << data->hwirq;
+ struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
+ struct s3c_irq_intc *intc = irq_data->intc;
+ unsigned long bitval = 1UL << irq_data->offset;
__raw_writel(bitval, intc->reg_pending);
if (intc->reg_intpnd)
__raw_writel(bitval, intc->reg_intpnd);
}
+static int s3c_irq_type(struct irq_data *data, unsigned int type)
+{
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_EDGE_FALLING:
+ case IRQ_TYPE_EDGE_BOTH:
+ irq_set_handler(data->irq, handle_edge_irq);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ case IRQ_TYPE_LEVEL_HIGH:
+ irq_set_handler(data->irq, handle_level_irq);
+ break;
+ default:
+ pr_err("No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int s3c_irqext_type_set(void __iomem *gpcon_reg,
void __iomem *extint_reg,
unsigned long gpcon_offset,
return 0;
}
-/* FIXME: make static when it's out of plat-samsung/irq.h */
-int s3c_irqext_type(struct irq_data *data, unsigned int type)
+static int s3c_irqext_type(struct irq_data *data, unsigned int type)
{
void __iomem *extint_reg;
void __iomem *gpcon_reg;
extint_offset, type);
}
-struct irq_chip s3c_irq_chip = {
+static struct irq_chip s3c_irq_chip = {
.name = "s3c",
.irq_ack = s3c_irq_ack,
.irq_mask = s3c_irq_mask,
.irq_unmask = s3c_irq_unmask,
+ .irq_set_type = s3c_irq_type,
.irq_set_wake = s3c_irq_wake
};
-struct irq_chip s3c_irq_level_chip = {
+static struct irq_chip s3c_irq_level_chip = {
.name = "s3c-level",
.irq_mask = s3c_irq_mask,
.irq_unmask = s3c_irq_unmask,
.irq_ack = s3c_irq_ack,
+ .irq_set_type = s3c_irq_type,
};
static struct irq_chip s3c_irqext_chip = {
static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
- struct s3c_irq_intc *intc = desc->irq_data.domain->host_data;
- struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq];
+ struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc);
+ struct s3c_irq_intc *intc = irq_data->intc;
struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
unsigned long src;
unsigned long msk;
unsigned int n;
+ unsigned int offset;
+
+ /* we're using individual domains for the non-dt case
+ * and one big domain for the dt case where the subintc
+ * starts at hwirq number 32.
+ */
+ offset = (intc->domain->of_node) ? 32 : 0;
chained_irq_enter(chip, desc);
while (src) {
n = __ffs(src);
src &= ~(1 << n);
- generic_handle_irq(irq_find_mapping(sub_intc->domain, n));
+ irq = irq_find_mapping(sub_intc->domain, offset + n);
+ generic_handle_irq(irq);
}
chained_irq_exit(chip, desc);
}
+static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
+ struct pt_regs *regs, int intc_offset)
+{
+ int pnd;
+ int offset;
+ int irq;
+
+ pnd = __raw_readl(intc->reg_intpnd);
+ if (!pnd)
+ return false;
+
+ /* non-dt machines use individual domains */
+ if (!intc->domain->of_node)
+ intc_offset = 0;
+
+ /* We have a problem that the INTOFFSET register does not always
+ * show one interrupt. Occasionally we get two interrupts through
+ * the prioritiser, and this causes the INTOFFSET register to show
+ * what looks like the logical-or of the two interrupt numbers.
+ *
+ * Thanks to Klaus, Shannon, et al for helping to debug this problem
+ */
+ offset = __raw_readl(intc->reg_intpnd + 4);
+
+ /* Find the bit manually, when the offset is wrong.
+ * The pending register only ever contains the one bit of the next
+ * interrupt to handle.
+ */
+ if (!(pnd & (1 << offset)))
+ offset = __ffs(pnd);
+
+ irq = irq_find_mapping(intc->domain, intc_offset + offset);
+ handle_IRQ(irq, regs);
+ return true;
+}
+
+asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
+{
+ do {
+ if (likely(s3c_intc[0]))
+ if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
+ continue;
+
+ if (s3c_intc[2])
+ if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
+ continue;
+
+ break;
+ } while (1);
+}
+
#ifdef CONFIG_FIQ
/**
* s3c24xx_set_fiq - set the FIQ routing
struct s3c_irq_data *parent_irq_data;
unsigned int irqno;
- if (!intc) {
- pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw);
- return -EINVAL;
- }
-
- if (!irq_data) {
- pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw);
- return -EINVAL;
- }
-
/* attach controller pointer to irq_data */
irq_data->intc = intc;
+ irq_data->offset = hw;
+
+ parent_intc = intc->parent;
/* set handler and flags */
switch (irq_data->type) {
case S3C_IRQTYPE_NONE:
return 0;
case S3C_IRQTYPE_EINT:
- if (irq_data->parent_irq)
+ /* On the S3C2412, the EINT0to3 have a parent irq
+ * but need the s3c_irq_eint0t4 chip
+ */
+ if (parent_intc && (!soc_is_s3c2412() || hw >= 4))
irq_set_chip_and_handler(virq, &s3c_irqext_chip,
handle_edge_irq);
else
handle_edge_irq);
break;
case S3C_IRQTYPE_EDGE:
- if (irq_data->parent_irq ||
- intc->reg_pending == S3C2416_SRCPND2)
+ if (parent_intc || intc->reg_pending == S3C2416_SRCPND2)
irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
handle_edge_irq);
else
handle_edge_irq);
break;
case S3C_IRQTYPE_LEVEL:
- if (irq_data->parent_irq)
+ if (parent_intc)
irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
handle_level_irq);
else
pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
return -EINVAL;
}
+
+ irq_set_chip_data(virq, irq_data);
+
set_irq_flags(virq, IRQF_VALID);
- if (irq_data->parent_irq) {
- parent_intc = intc->parent;
- if (!parent_intc) {
- pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n",
- hw);
+ if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) {
+ if (irq_data->parent_irq > 31) {
+ pr_err("irq-s3c24xx: parent irq %lu is out of range\n",
+ irq_data->parent_irq);
goto err;
}
parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
- if (!irq_data) {
- pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n",
- hw);
- goto err;
- }
-
parent_irq_data->sub_intc = intc;
parent_irq_data->sub_bits |= (1UL << hw);
}
}
-struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
+static struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
struct s3c_irq_data *irq_data,
struct s3c_irq_intc *parent,
unsigned long address)
void __iomem *base = (void *)0xf6000000; /* static mapping */
int irq_num;
int irq_start;
- int irq_offset;
int ret;
intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
intc->reg_intpnd = base + 0x10;
irq_num = 32;
irq_start = S3C2410_IRQ(0);
- irq_offset = 0;
break;
case 0x4a000018:
pr_debug("irq: found subintc\n");
intc->reg_mask = base + 0x1c;
irq_num = 29;
irq_start = S3C2410_IRQSUB(0);
- irq_offset = 0;
break;
case 0x4a000040:
pr_debug("irq: found intc2\n");
intc->reg_intpnd = base + 0x50;
irq_num = 8;
irq_start = S3C2416_IRQ(0);
- irq_offset = 0;
break;
case 0x560000a4:
pr_debug("irq: found eintc\n");
intc->reg_mask = base + 0xa4;
intc->reg_pending = base + 0x08;
- irq_num = 20;
+ irq_num = 24;
irq_start = S3C2410_IRQ(32);
- irq_offset = 4;
break;
default:
pr_err("irq: unsupported controller address\n");
/* now that all the data is complete, init the irq-domain */
s3c24xx_clear_intc(intc);
intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
- irq_offset, &s3c24xx_irq_ops,
+ 0, &s3c24xx_irq_ops,
intc);
if (!intc->domain) {
pr_err("irq: could not create irq-domain\n");
goto err;
}
+ set_handle_irq(s3c24xx_handle_irq);
+
return intc;
err:
return ERR_PTR(ret);
}
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
+static struct s3c_irq_data init_eint[32] = {
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
+};
-static struct s3c_irq_data init_base[32] = {
+#ifdef CONFIG_CPU_S3C2410
+static struct s3c_irq_data init_s3c2410base[32] = {
{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
};
-static struct s3c_irq_data init_eint[32] = {
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
- { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+static struct s3c_irq_data init_s3c2410subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+};
+
+void __init s3c2410_init_irq(void)
+{
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
+
+ s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL,
+ 0x4a000000);
+ if (IS_ERR(s3c_intc[0])) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
+
+ s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0],
+ s3c_intc[0], 0x4a000018);
+ s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c_irq_data init_s3c2412base[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2412eint[32] = {
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
};
-static struct s3c_irq_data init_subint[32] = {
+static struct s3c_irq_data init_s3c2412subint[32] = {
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_NONE, },
+ { .type = S3C_IRQTYPE_NONE, },
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */
};
-void __init s3c24xx_init_irq(void)
+void s3c2412_init_irq(void)
{
- struct s3c_irq_intc *main_intc;
+ pr_info("S3C2412: IRQ Support\n");
#ifdef CONFIG_FIQ
init_FIQ(FIQ_START);
#endif
- main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000);
- if (IS_ERR(main_intc)) {
+ s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL,
+ 0x4a000000);
+ if (IS_ERR(s3c_intc[0])) {
pr_err("irq: could not create main interrupt controller\n");
return;
}
- s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018);
- s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4);
+ s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0],
+ s3c_intc[0], 0x4a000018);
}
+#endif
#ifdef CONFIG_CPU_S3C2416
static struct s3c_irq_data init_s3c2416base[32] = {
static struct s3c_irq_data init_s3c2416_second[32] = {
{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
- { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
{ .type = S3C_IRQTYPE_NONE }, /* reserved */
{ .type = S3C_IRQTYPE_NONE }, /* reserved */
{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
- { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
- { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */
};
void __init s3c2416_init_irq(void)
{
- struct s3c_irq_intc *main_intc;
-
pr_info("S3C2416: IRQ Support\n");
#ifdef CONFIG_FIQ
init_FIQ(FIQ_START);
#endif
- main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000);
- if (IS_ERR(main_intc)) {
+ s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL,
+ 0x4a000000);
+ if (IS_ERR(s3c_intc[0])) {
pr_err("irq: could not create main interrupt controller\n");
return;
}
- s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
- s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018);
+ s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+ s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0],
+ s3c_intc[0], 0x4a000018);
+
+ s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0],
+ NULL, 0x4a000040);
+}
+
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+static struct s3c_irq_data init_s3c2440base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2440subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+void __init s3c2440_init_irq(void)
+{
+ pr_info("S3C2440: IRQ Support\n");
- s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040);
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
+
+ s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL,
+ 0x4a000000);
+ if (IS_ERR(s3c_intc[0])) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
+
+ s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+ s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0],
+ s3c_intc[0], 0x4a000018);
}
+#endif
+#ifdef CONFIG_CPU_S3C2442
+static struct s3c_irq_data init_s3c2442base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2442subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+};
+
+void __init s3c2442_init_irq(void)
+{
+ pr_info("S3C2442: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
+
+ s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL,
+ 0x4a000000);
+ if (IS_ERR(s3c_intc[0])) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
+
+ s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+ s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0],
+ s3c_intc[0], 0x4a000018);
+}
#endif
#ifdef CONFIG_CPU_S3C2443
void __init s3c2443_init_irq(void)
{
- struct s3c_irq_intc *main_intc;
-
pr_info("S3C2443: IRQ Support\n");
#ifdef CONFIG_FIQ
init_FIQ(FIQ_START);
#endif
- main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000);
- if (IS_ERR(main_intc)) {
+ s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL,
+ 0x4a000000);
+ if (IS_ERR(s3c_intc[0])) {
pr_err("irq: could not create main interrupt controller\n");
return;
}
- s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
- s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018);
+ s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
+ s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0],
+ s3c_intc[0], 0x4a000018);
+}
+#endif
+
+#ifdef CONFIG_OF
+static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ unsigned int ctrl_num = hw / 32;
+ unsigned int intc_hw = hw % 32;
+ struct s3c_irq_intc *intc = s3c_intc[ctrl_num];
+ struct s3c_irq_intc *parent_intc = intc->parent;
+ struct s3c_irq_data *irq_data = &intc->irqs[intc_hw];
+
+ /* attach controller pointer to irq_data */
+ irq_data->intc = intc;
+ irq_data->offset = intc_hw;
+
+ if (!parent_intc)
+ irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq);
+ else
+ irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+ handle_edge_irq);
+
+ irq_set_chip_data(virq, irq_data);
+
+ set_irq_flags(virq, IRQF_VALID);
+
+ return 0;
+}
+
+/* Translate our of irq notation
+ * format: <ctrl_num ctrl_irq parent_irq type>
+ */
+static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+ struct s3c_irq_intc *intc;
+ struct s3c_irq_intc *parent_intc;
+ struct s3c_irq_data *irq_data;
+ struct s3c_irq_data *parent_irq_data;
+ int irqno;
+
+ if (WARN_ON(intsize < 4))
+ return -EINVAL;
+
+ if (intspec[0] > 2 || !s3c_intc[intspec[0]]) {
+ pr_err("controller number %d invalid\n", intspec[0]);
+ return -EINVAL;
+ }
+ intc = s3c_intc[intspec[0]];
+
+ *out_hwirq = intspec[0] * 32 + intspec[2];
+ *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK;
+
+ parent_intc = intc->parent;
+ if (parent_intc) {
+ irq_data = &intc->irqs[intspec[2]];
+ irq_data->parent_irq = intspec[1];
+ parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
+ parent_irq_data->sub_intc = intc;
+ parent_irq_data->sub_bits |= (1UL << intspec[2]);
+
+ /* parent_intc is always s3c_intc[0], so no offset */
+ irqno = irq_create_mapping(parent_intc->domain, intspec[1]);
+ if (irqno < 0) {
+ pr_err("irq: could not map parent interrupt\n");
+ return irqno;
+ }
+
+ irq_set_chained_handler(irqno, s3c_irq_demux);
+ }
+
+ return 0;
+}
+
+static struct irq_domain_ops s3c24xx_irq_ops_of = {
+ .map = s3c24xx_irq_map_of,
+ .xlate = s3c24xx_irq_xlate_of,
+};
+
+struct s3c24xx_irq_of_ctrl {
+ char *name;
+ unsigned long offset;
+ struct s3c_irq_intc **handle;
+ struct s3c_irq_intc **parent;
+ struct irq_domain_ops *ops;
+};
+
+static int __init s3c_init_intc_of(struct device_node *np,
+ struct device_node *interrupt_parent,
+ struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl)
+{
+ struct s3c_irq_intc *intc;
+ struct s3c24xx_irq_of_ctrl *ctrl;
+ struct irq_domain *domain;
+ void __iomem *reg_base;
+ int i;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base) {
+ pr_err("irq-s3c24xx: could not map irq registers\n");
+ return -EINVAL;
+ }
+
+ domain = irq_domain_add_linear(np, num_ctrl * 32,
+ &s3c24xx_irq_ops_of, NULL);
+ if (!domain) {
+ pr_err("irq: could not create irq-domain\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < num_ctrl; i++) {
+ ctrl = &s3c_ctrl[i];
+
+ pr_debug("irq: found controller %s\n", ctrl->name);
+
+ intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
+ if (!intc)
+ return -ENOMEM;
+
+ intc->domain = domain;
+ intc->irqs = kzalloc(sizeof(struct s3c_irq_data) * 32,
+ GFP_KERNEL);
+ if (!intc->irqs) {
+ kfree(intc);
+ return -ENOMEM;
+ }
+
+ if (ctrl->parent) {
+ intc->reg_pending = reg_base + ctrl->offset;
+ intc->reg_mask = reg_base + ctrl->offset + 0x4;
+
+ if (*(ctrl->parent)) {
+ intc->parent = *(ctrl->parent);
+ } else {
+ pr_warn("irq: parent of %s missing\n",
+ ctrl->name);
+ kfree(intc->irqs);
+ kfree(intc);
+ continue;
+ }
+ } else {
+ intc->reg_pending = reg_base + ctrl->offset;
+ intc->reg_mask = reg_base + ctrl->offset + 0x08;
+ intc->reg_intpnd = reg_base + ctrl->offset + 0x10;
+ }
+
+ s3c24xx_clear_intc(intc);
+ s3c_intc[i] = intc;
+ }
+
+ set_handle_irq(s3c24xx_handle_irq);
+
+ return 0;
+}
+
+static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = {
+ {
+ .name = "intc",
+ .offset = 0,
+ }, {
+ .name = "subintc",
+ .offset = 0x18,
+ .parent = &s3c_intc[0],
+ }
+};
+
+int __init s3c2410_init_intc_of(struct device_node *np,
+ struct device_node *interrupt_parent,
+ struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl)
+{
+ return s3c_init_intc_of(np, interrupt_parent,
+ s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl));
+}
+IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of);
+
+static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = {
+ {
+ .name = "intc",
+ .offset = 0,
+ }, {
+ .name = "subintc",
+ .offset = 0x18,
+ .parent = &s3c_intc[0],
+ }, {
+ .name = "intc2",
+ .offset = 0x40,
+ }
+};
+
+int __init s3c2416_init_intc_of(struct device_node *np,
+ struct device_node *interrupt_parent,
+ struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl)
+{
+ return s3c_init_intc_of(np, interrupt_parent,
+ s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl));
}
+IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of);
#endif
#include <asm/irq.h>
#include <asm/exception.h>
+#include <asm/mach/irq.h>
+
+#include "irqchip.h"
#define VT8500_ICPC_IRQ 0x20
#define VT8500_ICPC_FIQ 0x24
goto out;
}
+ set_handle_irq(vt8500_handle_irq);
+
vt8500_init_irq_hw(intc[active_cnt].base);
pr_info("vt8500-irq: Added interrupt controller\n");
return 0;
}
+IRQCHIP_DECLARE(vt8500_irq, "via,vt8500-intc", vt8500_irq_init);
config HISAX_NETJET
bool "NETjet card"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on VIRT_TO_BUS
help
This enables HiSax support for the NetJet from Traverse
Technologies.
config HISAX_NETJET_U
bool "NETspider U card"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on VIRT_TO_BUS
help
This enables HiSax support for the Netspider U interface ISDN card
from Traverse Technologies.
int j;
int l;
- l = strlen(msg);
+ l = min(strlen(msg), sizeof(cmd.parm) - sizeof(cmd.parm.cmsg)
+ + sizeof(cmd.parm.cmsg.para) - 2);
+
if (!l) {
isdn_tty_modem_result(RESULT_ERROR, info);
return;
{
struct blk_plug plug;
+ BUG_ON(dm_bufio_in_request());
+
blk_start_plug(&plug);
dm_bufio_lock(c);
__le32 read_misses;
__le32 write_hits;
__le32 write_misses;
+
+ __le32 policy_version[CACHE_POLICY_VERSION_SIZE];
} __packed;
struct dm_cache_metadata {
bool clean_when_opened:1;
char policy_name[CACHE_POLICY_NAME_SIZE];
+ unsigned policy_version[CACHE_POLICY_VERSION_SIZE];
size_t policy_hint_size;
struct dm_cache_statistics stats;
};
memset(disk_super->uuid, 0, sizeof(disk_super->uuid));
disk_super->magic = cpu_to_le64(CACHE_SUPERBLOCK_MAGIC);
disk_super->version = cpu_to_le32(CACHE_VERSION);
- memset(disk_super->policy_name, 0, CACHE_POLICY_NAME_SIZE);
+ memset(disk_super->policy_name, 0, sizeof(disk_super->policy_name));
+ memset(disk_super->policy_version, 0, sizeof(disk_super->policy_version));
disk_super->policy_hint_size = 0;
r = dm_sm_copy_root(cmd->metadata_sm, &disk_super->metadata_space_map_root,
disk_super->metadata_block_size = cpu_to_le32(DM_CACHE_METADATA_BLOCK_SIZE >> SECTOR_SHIFT);
disk_super->data_block_size = cpu_to_le32(cmd->data_block_size);
disk_super->cache_blocks = cpu_to_le32(0);
- memset(disk_super->policy_name, 0, sizeof(disk_super->policy_name));
disk_super->read_hits = cpu_to_le32(0);
disk_super->read_misses = cpu_to_le32(0);
cmd->data_block_size = le32_to_cpu(disk_super->data_block_size);
cmd->cache_blocks = to_cblock(le32_to_cpu(disk_super->cache_blocks));
strncpy(cmd->policy_name, disk_super->policy_name, sizeof(cmd->policy_name));
+ cmd->policy_version[0] = le32_to_cpu(disk_super->policy_version[0]);
+ cmd->policy_version[1] = le32_to_cpu(disk_super->policy_version[1]);
+ cmd->policy_version[2] = le32_to_cpu(disk_super->policy_version[2]);
cmd->policy_hint_size = le32_to_cpu(disk_super->policy_hint_size);
cmd->stats.read_hits = le32_to_cpu(disk_super->read_hits);
disk_super->discard_nr_blocks = cpu_to_le64(from_dblock(cmd->discard_nr_blocks));
disk_super->cache_blocks = cpu_to_le32(from_cblock(cmd->cache_blocks));
strncpy(disk_super->policy_name, cmd->policy_name, sizeof(disk_super->policy_name));
+ disk_super->policy_version[0] = cpu_to_le32(cmd->policy_version[0]);
+ disk_super->policy_version[1] = cpu_to_le32(cmd->policy_version[1]);
+ disk_super->policy_version[2] = cpu_to_le32(cmd->policy_version[2]);
disk_super->read_hits = cpu_to_le32(cmd->stats.read_hits);
disk_super->read_misses = cpu_to_le32(cmd->stats.read_misses);
bool hints_valid;
};
+static bool policy_unchanged(struct dm_cache_metadata *cmd,
+ struct dm_cache_policy *policy)
+{
+ const char *policy_name = dm_cache_policy_get_name(policy);
+ const unsigned *policy_version = dm_cache_policy_get_version(policy);
+ size_t policy_hint_size = dm_cache_policy_get_hint_size(policy);
+
+ /*
+ * Ensure policy names match.
+ */
+ if (strncmp(cmd->policy_name, policy_name, sizeof(cmd->policy_name)))
+ return false;
+
+ /*
+ * Ensure policy major versions match.
+ */
+ if (cmd->policy_version[0] != policy_version[0])
+ return false;
+
+ /*
+ * Ensure policy hint sizes match.
+ */
+ if (cmd->policy_hint_size != policy_hint_size)
+ return false;
+
+ return true;
+}
+
static bool hints_array_initialized(struct dm_cache_metadata *cmd)
{
return cmd->hint_root && cmd->policy_hint_size;
}
static bool hints_array_available(struct dm_cache_metadata *cmd,
- const char *policy_name)
+ struct dm_cache_policy *policy)
{
- bool policy_names_match = !strncmp(cmd->policy_name, policy_name,
- sizeof(cmd->policy_name));
-
- return cmd->clean_when_opened && policy_names_match &&
+ return cmd->clean_when_opened && policy_unchanged(cmd, policy) &&
hints_array_initialized(cmd);
}
return r;
}
-static int __load_mappings(struct dm_cache_metadata *cmd, const char *policy_name,
+static int __load_mappings(struct dm_cache_metadata *cmd,
+ struct dm_cache_policy *policy,
load_mapping_fn fn, void *context)
{
struct thunk thunk;
thunk.cmd = cmd;
thunk.respect_dirty_flags = cmd->clean_when_opened;
- thunk.hints_valid = hints_array_available(cmd, policy_name);
+ thunk.hints_valid = hints_array_available(cmd, policy);
return dm_array_walk(&cmd->info, cmd->root, __load_mapping, &thunk);
}
-int dm_cache_load_mappings(struct dm_cache_metadata *cmd, const char *policy_name,
+int dm_cache_load_mappings(struct dm_cache_metadata *cmd,
+ struct dm_cache_policy *policy,
load_mapping_fn fn, void *context)
{
int r;
down_read(&cmd->root_lock);
- r = __load_mappings(cmd, policy_name, fn, context);
+ r = __load_mappings(cmd, policy, fn, context);
up_read(&cmd->root_lock);
return r;
/* nothing to be done */
return 0;
- value = pack_value(oblock, flags | (dirty ? M_DIRTY : 0));
+ value = pack_value(oblock, (flags & ~M_DIRTY) | (dirty ? M_DIRTY : 0));
__dm_bless_for_disk(&value);
r = dm_array_set_value(&cmd->info, cmd->root, from_cblock(cblock),
__le32 value;
size_t hint_size;
const char *policy_name = dm_cache_policy_get_name(policy);
+ const unsigned *policy_version = dm_cache_policy_get_version(policy);
if (!policy_name[0] ||
(strlen(policy_name) > sizeof(cmd->policy_name) - 1))
return -EINVAL;
- if (strcmp(cmd->policy_name, policy_name)) {
+ if (!policy_unchanged(cmd, policy)) {
strncpy(cmd->policy_name, policy_name, sizeof(cmd->policy_name));
+ memcpy(cmd->policy_version, policy_version, sizeof(cmd->policy_version));
hint_size = dm_cache_policy_get_hint_size(policy);
if (!hint_size)
dm_cblock_t cblock, bool dirty,
uint32_t hint, bool hint_valid);
int dm_cache_load_mappings(struct dm_cache_metadata *cmd,
- const char *policy_name,
+ struct dm_cache_policy *policy,
load_mapping_fn fn,
void *context);
/*----------------------------------------------------------------*/
#define DM_MSG_PREFIX "cache cleaner"
-#define CLEANER_VERSION "1.0.0"
/* Cache entry struct. */
struct wb_cache_entry {
static struct dm_cache_policy_type wb_policy_type = {
.name = "cleaner",
+ .version = {1, 0, 0},
.hint_size = 0,
.owner = THIS_MODULE,
.create = wb_create
if (r < 0)
DMERR("register failed %d", r);
else
- DMINFO("version " CLEANER_VERSION " loaded");
+ DMINFO("version %u.%u.%u loaded",
+ wb_policy_type.version[0],
+ wb_policy_type.version[1],
+ wb_policy_type.version[2]);
return r;
}
*/
const char *dm_cache_policy_get_name(struct dm_cache_policy *p);
+const unsigned *dm_cache_policy_get_version(struct dm_cache_policy *p);
+
size_t dm_cache_policy_get_hint_size(struct dm_cache_policy *p);
/*----------------------------------------------------------------*/
#include <linux/vmalloc.h>
#define DM_MSG_PREFIX "cache-policy-mq"
-#define MQ_VERSION "1.0.0"
static struct kmem_cache *mq_entry_cache;
static struct dm_cache_policy_type mq_policy_type = {
.name = "mq",
+ .version = {1, 0, 0},
.hint_size = 4,
.owner = THIS_MODULE,
.create = mq_create
static struct dm_cache_policy_type default_policy_type = {
.name = "default",
+ .version = {1, 0, 0},
.hint_size = 4,
.owner = THIS_MODULE,
.create = mq_create
r = dm_cache_policy_register(&default_policy_type);
if (!r) {
- DMINFO("version " MQ_VERSION " loaded");
+ DMINFO("version %u.%u.%u loaded",
+ mq_policy_type.version[0],
+ mq_policy_type.version[1],
+ mq_policy_type.version[2]);
return 0;
}
}
EXPORT_SYMBOL_GPL(dm_cache_policy_get_name);
+const unsigned *dm_cache_policy_get_version(struct dm_cache_policy *p)
+{
+ struct dm_cache_policy_type *t = p->private;
+
+ return t->version;
+}
+EXPORT_SYMBOL_GPL(dm_cache_policy_get_version);
+
size_t dm_cache_policy_get_hint_size(struct dm_cache_policy *p)
{
struct dm_cache_policy_type *t = p->private;
* We maintain a little register of the different policy types.
*/
#define CACHE_POLICY_NAME_SIZE 16
+#define CACHE_POLICY_VERSION_SIZE 3
struct dm_cache_policy_type {
/* For use by the register code only. */
* what gets passed on the target line to select your policy.
*/
char name[CACHE_POLICY_NAME_SIZE];
+ unsigned version[CACHE_POLICY_VERSION_SIZE];
/*
* Policies may store a hint for each each cache block.
#include "dm.h"
#include "dm-bio-prison.h"
+#include "dm-bio-record.h"
#include "dm-cache-metadata.h"
#include <linux/dm-io.h>
spinlock_t lock;
struct bio_list deferred_bios;
struct bio_list deferred_flush_bios;
+ struct bio_list deferred_writethrough_bios;
struct list_head quiesced_migrations;
struct list_head completed_migrations;
struct list_head need_commit_migrations;
/*
* origin_blocks entries, discarded if set.
*/
- sector_t discard_block_size; /* a power of 2 times sectors per block */
+ uint32_t discard_block_size; /* a power of 2 times sectors per block */
dm_dblock_t discard_nr_blocks;
unsigned long *discard_bitset;
bool tick:1;
unsigned req_nr:2;
struct dm_deferred_entry *all_io_entry;
+
+ /*
+ * writethrough fields. These MUST remain at the end of this
+ * structure and the 'cache' member must be the first as it
+ * is used to determine the offsetof the writethrough fields.
+ */
+ struct cache *cache;
+ dm_cblock_t cblock;
+ bio_end_io_t *saved_bi_end_io;
+ struct dm_bio_details bio_details;
};
struct dm_cache_migration {
return cache->sectors_per_block_shift >= 0;
}
+static dm_block_t block_div(dm_block_t b, uint32_t n)
+{
+ do_div(b, n);
+
+ return b;
+}
+
static dm_dblock_t oblock_to_dblock(struct cache *cache, dm_oblock_t oblock)
{
- sector_t discard_blocks = cache->discard_block_size;
+ uint32_t discard_blocks = cache->discard_block_size;
dm_block_t b = from_oblock(oblock);
if (!block_size_is_power_of_two(cache))
- (void) sector_div(discard_blocks, cache->sectors_per_block);
+ discard_blocks = discard_blocks / cache->sectors_per_block;
else
discard_blocks >>= cache->sectors_per_block_shift;
- (void) sector_div(b, discard_blocks);
+ b = block_div(b, discard_blocks);
return to_dblock(b);
}
/*----------------------------------------------------------------
* Per bio data
*--------------------------------------------------------------*/
-static struct per_bio_data *get_per_bio_data(struct bio *bio)
+
+/*
+ * If using writeback, leave out struct per_bio_data's writethrough fields.
+ */
+#define PB_DATA_SIZE_WB (offsetof(struct per_bio_data, cache))
+#define PB_DATA_SIZE_WT (sizeof(struct per_bio_data))
+
+static size_t get_per_bio_data_size(struct cache *cache)
{
- struct per_bio_data *pb = dm_per_bio_data(bio, sizeof(struct per_bio_data));
+ return cache->features.write_through ? PB_DATA_SIZE_WT : PB_DATA_SIZE_WB;
+}
+
+static struct per_bio_data *get_per_bio_data(struct bio *bio, size_t data_size)
+{
+ struct per_bio_data *pb = dm_per_bio_data(bio, data_size);
BUG_ON(!pb);
return pb;
}
-static struct per_bio_data *init_per_bio_data(struct bio *bio)
+static struct per_bio_data *init_per_bio_data(struct bio *bio, size_t data_size)
{
- struct per_bio_data *pb = get_per_bio_data(bio);
+ struct per_bio_data *pb = get_per_bio_data(bio, data_size);
pb->tick = false;
pb->req_nr = dm_bio_get_target_bio_nr(bio);
static void check_if_tick_bio_needed(struct cache *cache, struct bio *bio)
{
unsigned long flags;
- struct per_bio_data *pb = get_per_bio_data(bio);
+ size_t pb_data_size = get_per_bio_data_size(cache);
+ struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size);
spin_lock_irqsave(&cache->lock, flags);
if (cache->need_tick_bio &&
spin_unlock_irqrestore(&cache->lock, flags);
}
+static void defer_writethrough_bio(struct cache *cache, struct bio *bio)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cache->lock, flags);
+ bio_list_add(&cache->deferred_writethrough_bios, bio);
+ spin_unlock_irqrestore(&cache->lock, flags);
+
+ wake_worker(cache);
+}
+
+static void writethrough_endio(struct bio *bio, int err)
+{
+ struct per_bio_data *pb = get_per_bio_data(bio, PB_DATA_SIZE_WT);
+ bio->bi_end_io = pb->saved_bi_end_io;
+
+ if (err) {
+ bio_endio(bio, err);
+ return;
+ }
+
+ dm_bio_restore(&pb->bio_details, bio);
+ remap_to_cache(pb->cache, bio, pb->cblock);
+
+ /*
+ * We can't issue this bio directly, since we're in interrupt
+ * context. So it get's put on a bio list for processing by the
+ * worker thread.
+ */
+ defer_writethrough_bio(pb->cache, bio);
+}
+
+/*
+ * When running in writethrough mode we need to send writes to clean blocks
+ * to both the cache and origin devices. In future we'd like to clone the
+ * bio and send them in parallel, but for now we're doing them in
+ * series as this is easier.
+ */
+static void remap_to_origin_then_cache(struct cache *cache, struct bio *bio,
+ dm_oblock_t oblock, dm_cblock_t cblock)
+{
+ struct per_bio_data *pb = get_per_bio_data(bio, PB_DATA_SIZE_WT);
+
+ pb->cache = cache;
+ pb->cblock = cblock;
+ pb->saved_bi_end_io = bio->bi_end_io;
+ dm_bio_record(&pb->bio_details, bio);
+ bio->bi_end_io = writethrough_endio;
+
+ remap_to_origin_clear_discard(pb->cache, bio, oblock);
+}
+
/*----------------------------------------------------------------
* Migration processing
*
static void process_flush_bio(struct cache *cache, struct bio *bio)
{
- struct per_bio_data *pb = get_per_bio_data(bio);
+ size_t pb_data_size = get_per_bio_data_size(cache);
+ struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size);
BUG_ON(bio->bi_size);
if (!pb->req_nr)
dm_block_t end_block = bio->bi_sector + bio_sectors(bio);
dm_block_t b;
- (void) sector_div(end_block, cache->discard_block_size);
+ end_block = block_div(end_block, cache->discard_block_size);
for (b = start_block; b < end_block; b++)
set_discard(cache, to_dblock(b));
dm_oblock_t block = get_bio_block(cache, bio);
struct dm_bio_prison_cell *cell_prealloc, *old_ocell, *new_ocell;
struct policy_result lookup_result;
- struct per_bio_data *pb = get_per_bio_data(bio);
+ size_t pb_data_size = get_per_bio_data_size(cache);
+ struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size);
bool discarded_block = is_discarded_oblock(cache, block);
bool can_migrate = discarded_block || spare_migration_bandwidth(cache);
inc_hit_counter(cache, bio);
pb->all_io_entry = dm_deferred_entry_inc(cache->all_io_ds);
- if (is_writethrough_io(cache, bio, lookup_result.cblock)) {
- /*
- * No need to mark anything dirty in write through mode.
- */
- pb->req_nr == 0 ?
- remap_to_cache(cache, bio, lookup_result.cblock) :
- remap_to_origin_clear_discard(cache, bio, block);
- } else
+ if (is_writethrough_io(cache, bio, lookup_result.cblock))
+ remap_to_origin_then_cache(cache, bio, block, lookup_result.cblock);
+ else
remap_to_cache_dirty(cache, bio, block, lookup_result.cblock);
issue(cache, bio);
case POLICY_MISS:
inc_miss_counter(cache, bio);
pb->all_io_entry = dm_deferred_entry_inc(cache->all_io_ds);
-
- if (pb->req_nr != 0) {
- /*
- * This is a duplicate writethrough io that is no
- * longer needed because the block has been demoted.
- */
- bio_endio(bio, 0);
- } else {
- remap_to_origin_clear_discard(cache, bio, block);
- issue(cache, bio);
- }
+ remap_to_origin_clear_discard(cache, bio, block);
+ issue(cache, bio);
break;
case POLICY_NEW:
submit_bios ? generic_make_request(bio) : bio_io_error(bio);
}
+static void process_deferred_writethrough_bios(struct cache *cache)
+{
+ unsigned long flags;
+ struct bio_list bios;
+ struct bio *bio;
+
+ bio_list_init(&bios);
+
+ spin_lock_irqsave(&cache->lock, flags);
+ bio_list_merge(&bios, &cache->deferred_writethrough_bios);
+ bio_list_init(&cache->deferred_writethrough_bios);
+ spin_unlock_irqrestore(&cache->lock, flags);
+
+ while ((bio = bio_list_pop(&bios)))
+ generic_make_request(bio);
+}
+
static void writeback_some_dirty_blocks(struct cache *cache)
{
int r = 0;
else
return !bio_list_empty(&cache->deferred_bios) ||
!bio_list_empty(&cache->deferred_flush_bios) ||
+ !bio_list_empty(&cache->deferred_writethrough_bios) ||
!list_empty(&cache->quiesced_migrations) ||
!list_empty(&cache->completed_migrations) ||
!list_empty(&cache->need_commit_migrations);
writeback_some_dirty_blocks(cache);
+ process_deferred_writethrough_bios(cache);
+
if (commit_if_needed(cache)) {
process_deferred_flush_bios(cache, false);
}
r = set_config_values(cache->policy, ca->policy_argc, ca->policy_argv);
- if (r)
+ if (r) {
+ *error = "Error setting cache policy's config values";
dm_cache_policy_destroy(cache->policy);
+ cache->policy = NULL;
+ }
return r;
}
#define DEFAULT_MIGRATION_THRESHOLD (2048 * 100)
-static unsigned cache_num_write_bios(struct dm_target *ti, struct bio *bio);
-
static int cache_create(struct cache_args *ca, struct cache **result)
{
int r = 0;
cache->ti = ca->ti;
ti->private = cache;
- ti->per_bio_data_size = sizeof(struct per_bio_data);
ti->num_flush_bios = 2;
ti->flush_supported = true;
ti->discard_zeroes_data_unsupported = true;
memcpy(&cache->features, &ca->features, sizeof(cache->features));
-
- if (cache->features.write_through)
- ti->num_write_bios = cache_num_write_bios;
+ ti->per_bio_data_size = get_per_bio_data_size(cache);
cache->callbacks.congested_fn = cache_is_congested;
dm_table_add_target_callbacks(ti->table, &cache->callbacks);
/* FIXME: factor out this whole section */
origin_blocks = cache->origin_sectors = ca->origin_sectors;
- (void) sector_div(origin_blocks, ca->block_size);
+ origin_blocks = block_div(origin_blocks, ca->block_size);
cache->origin_blocks = to_oblock(origin_blocks);
cache->sectors_per_block = ca->block_size;
dm_block_t cache_size = ca->cache_sectors;
cache->sectors_per_block_shift = -1;
- (void) sector_div(cache_size, ca->block_size);
+ cache_size = block_div(cache_size, ca->block_size);
cache->cache_size = to_cblock(cache_size);
} else {
cache->sectors_per_block_shift = __ffs(ca->block_size);
spin_lock_init(&cache->lock);
bio_list_init(&cache->deferred_bios);
bio_list_init(&cache->deferred_flush_bios);
+ bio_list_init(&cache->deferred_writethrough_bios);
INIT_LIST_HEAD(&cache->quiesced_migrations);
INIT_LIST_HEAD(&cache->completed_migrations);
INIT_LIST_HEAD(&cache->need_commit_migrations);
goto out;
r = cache_create(ca, &cache);
+ if (r)
+ goto out;
r = copy_ctr_args(cache, argc - 3, (const char **)argv + 3);
if (r) {
return r;
}
-static unsigned cache_num_write_bios(struct dm_target *ti, struct bio *bio)
-{
- int r;
- struct cache *cache = ti->private;
- dm_oblock_t block = get_bio_block(cache, bio);
- dm_cblock_t cblock;
-
- r = policy_lookup(cache->policy, block, &cblock);
- if (r < 0)
- return 2; /* assume the worst */
-
- return (!r && !is_dirty(cache, cblock)) ? 2 : 1;
-}
-
static int cache_map(struct dm_target *ti, struct bio *bio)
{
struct cache *cache = ti->private;
int r;
dm_oblock_t block = get_bio_block(cache, bio);
+ size_t pb_data_size = get_per_bio_data_size(cache);
bool can_migrate = false;
bool discarded_block;
struct dm_bio_prison_cell *cell;
return DM_MAPIO_REMAPPED;
}
- pb = init_per_bio_data(bio);
+ pb = init_per_bio_data(bio, pb_data_size);
if (bio->bi_rw & (REQ_FLUSH | REQ_FUA | REQ_DISCARD)) {
defer_bio(cache, bio);
inc_hit_counter(cache, bio);
pb->all_io_entry = dm_deferred_entry_inc(cache->all_io_ds);
- if (is_writethrough_io(cache, bio, lookup_result.cblock)) {
- /*
- * No need to mark anything dirty in write through mode.
- */
- pb->req_nr == 0 ?
- remap_to_cache(cache, bio, lookup_result.cblock) :
- remap_to_origin_clear_discard(cache, bio, block);
- cell_defer(cache, cell, false);
- } else {
+ if (is_writethrough_io(cache, bio, lookup_result.cblock))
+ remap_to_origin_then_cache(cache, bio, block, lookup_result.cblock);
+ else
remap_to_cache_dirty(cache, bio, block, lookup_result.cblock);
- cell_defer(cache, cell, false);
- }
+
+ cell_defer(cache, cell, false);
break;
case POLICY_MISS:
{
struct cache *cache = ti->private;
unsigned long flags;
- struct per_bio_data *pb = get_per_bio_data(bio);
+ size_t pb_data_size = get_per_bio_data_size(cache);
+ struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size);
if (pb->tick) {
policy_tick(cache->policy);
}
if (!cache->loaded_mappings) {
- r = dm_cache_load_mappings(cache->cmd,
- dm_cache_policy_get_name(cache->policy),
+ r = dm_cache_load_mappings(cache->cmd, cache->policy,
load_mapping, cache);
if (r) {
DMERR("could not load cache mappings");
static struct target_type cache_target = {
.name = "cache",
- .version = {1, 0, 0},
+ .version = {1, 1, 0},
.module = THIS_MODULE,
.ctr = cache_ctr,
.dtr = cache_dtr,
return q && blk_queue_discard(q);
}
+static bool is_factor(sector_t block_size, uint32_t n)
+{
+ return !sector_div(block_size, n);
+}
+
/*
* If discard_passdown was enabled verify that the data device
* supports discards. Disable discard_passdown if not.
else if (data_limits->discard_granularity > block_size)
reason = "discard granularity larger than a block";
- else if (block_size & (data_limits->discard_granularity - 1))
+ else if (!is_factor(block_size, data_limits->discard_granularity))
reason = "discard granularity not a factor of block size";
if (reason) {
.name = "thin-pool",
.features = DM_TARGET_SINGLETON | DM_TARGET_ALWAYS_WRITEABLE |
DM_TARGET_IMMUTABLE,
- .version = {1, 6, 1},
+ .version = {1, 7, 0},
.module = THIS_MODULE,
.ctr = pool_ctr,
.dtr = pool_dtr,
static struct target_type thin_target = {
.name = "thin",
- .version = {1, 7, 1},
+ .version = {1, 8, 0},
.module = THIS_MODULE,
.ctr = thin_ctr,
.dtr = thin_dtr,
*/
};
+struct dm_verity_prefetch_work {
+ struct work_struct work;
+ struct dm_verity *v;
+ sector_t block;
+ unsigned n_blocks;
+};
+
static struct shash_desc *io_hash_desc(struct dm_verity *v, struct dm_verity_io *io)
{
return (struct shash_desc *)(io + 1);
* The root buffer is not prefetched, it is assumed that it will be cached
* all the time.
*/
-static void verity_prefetch_io(struct dm_verity *v, struct dm_verity_io *io)
+static void verity_prefetch_io(struct work_struct *work)
{
+ struct dm_verity_prefetch_work *pw =
+ container_of(work, struct dm_verity_prefetch_work, work);
+ struct dm_verity *v = pw->v;
int i;
for (i = v->levels - 2; i >= 0; i--) {
sector_t hash_block_start;
sector_t hash_block_end;
- verity_hash_at_level(v, io->block, i, &hash_block_start, NULL);
- verity_hash_at_level(v, io->block + io->n_blocks - 1, i, &hash_block_end, NULL);
+ verity_hash_at_level(v, pw->block, i, &hash_block_start, NULL);
+ verity_hash_at_level(v, pw->block + pw->n_blocks - 1, i, &hash_block_end, NULL);
if (!i) {
unsigned cluster = ACCESS_ONCE(dm_verity_prefetch_cluster);
dm_bufio_prefetch(v->bufio, hash_block_start,
hash_block_end - hash_block_start + 1);
}
+
+ kfree(pw);
+}
+
+static void verity_submit_prefetch(struct dm_verity *v, struct dm_verity_io *io)
+{
+ struct dm_verity_prefetch_work *pw;
+
+ pw = kmalloc(sizeof(struct dm_verity_prefetch_work),
+ GFP_NOIO | __GFP_NORETRY | __GFP_NOMEMALLOC | __GFP_NOWARN);
+
+ if (!pw)
+ return;
+
+ INIT_WORK(&pw->work, verity_prefetch_io);
+ pw->v = v;
+ pw->block = io->block;
+ pw->n_blocks = io->n_blocks;
+ queue_work(v->verify_wq, &pw->work);
}
/*
memcpy(io->io_vec, bio_iovec(bio),
io->io_vec_size * sizeof(struct bio_vec));
- verity_prefetch_io(v, io);
+ verity_submit_prefetch(v, io);
generic_make_request(bio);
static struct target_type verity_target = {
.name = "verity",
- .version = {1, 1, 1},
+ .version = {1, 2, 0},
.module = THIS_MODULE,
.ctr = verity_ctr,
.dtr = verity_dtr,
removed++;
}
}
- if (removed)
- sysfs_notify(&mddev->kobj, NULL,
- "degraded");
-
+ if (removed && mddev->kobj.sd)
+ sysfs_notify(&mddev->kobj, NULL, "degraded");
rdev_for_each(rdev, mddev) {
if (rdev->raid_disk >= 0 &&
static inline int sysfs_link_rdev(struct mddev *mddev, struct md_rdev *rdev)
{
char nm[20];
- if (!test_bit(Replacement, &rdev->flags)) {
+ if (!test_bit(Replacement, &rdev->flags) && mddev->kobj.sd) {
sprintf(nm, "rd%d", rdev->raid_disk);
return sysfs_create_link(&mddev->kobj, &rdev->kobj, nm);
} else
static inline void sysfs_unlink_rdev(struct mddev *mddev, struct md_rdev *rdev)
{
char nm[20];
- if (!test_bit(Replacement, &rdev->flags)) {
+ if (!test_bit(Replacement, &rdev->flags) && mddev->kobj.sd) {
sprintf(nm, "rd%d", rdev->raid_disk);
sysfs_remove_link(&mddev->kobj, nm);
}
struct btree_node *n;
};
-static struct dm_btree_value_type le64_type = {
- .context = NULL,
- .size = sizeof(__le64),
- .inc = NULL,
- .dec = NULL,
- .equal = NULL
-};
-
-static int init_child(struct dm_btree_info *info, struct btree_node *parent,
+static int init_child(struct dm_btree_info *info, struct dm_btree_value_type *vt,
+ struct btree_node *parent,
unsigned index, struct child *result)
{
int r, inc;
result->n = dm_block_data(result->block);
if (inc)
- inc_children(info->tm, result->n, &le64_type);
+ inc_children(info->tm, result->n, vt);
*((__le64 *) value_ptr(parent, index)) =
cpu_to_le64(dm_block_location(result->block));
}
static int rebalance2(struct shadow_spine *s, struct dm_btree_info *info,
- unsigned left_index)
+ struct dm_btree_value_type *vt, unsigned left_index)
{
int r;
struct btree_node *parent;
parent = dm_block_data(shadow_current(s));
- r = init_child(info, parent, left_index, &left);
+ r = init_child(info, vt, parent, left_index, &left);
if (r)
return r;
- r = init_child(info, parent, left_index + 1, &right);
+ r = init_child(info, vt, parent, left_index + 1, &right);
if (r) {
exit_child(info, &left);
return r;
}
static int rebalance3(struct shadow_spine *s, struct dm_btree_info *info,
- unsigned left_index)
+ struct dm_btree_value_type *vt, unsigned left_index)
{
int r;
struct btree_node *parent = dm_block_data(shadow_current(s));
/*
* FIXME: fill out an array?
*/
- r = init_child(info, parent, left_index, &left);
+ r = init_child(info, vt, parent, left_index, &left);
if (r)
return r;
- r = init_child(info, parent, left_index + 1, ¢er);
+ r = init_child(info, vt, parent, left_index + 1, ¢er);
if (r) {
exit_child(info, &left);
return r;
}
- r = init_child(info, parent, left_index + 2, &right);
+ r = init_child(info, vt, parent, left_index + 2, &right);
if (r) {
exit_child(info, &left);
exit_child(info, ¢er);
}
static int rebalance_children(struct shadow_spine *s,
- struct dm_btree_info *info, uint64_t key)
+ struct dm_btree_info *info,
+ struct dm_btree_value_type *vt, uint64_t key)
{
int i, r, has_left_sibling, has_right_sibling;
uint32_t child_entries;
has_right_sibling = i < (le32_to_cpu(n->header.nr_entries) - 1);
if (!has_left_sibling)
- r = rebalance2(s, info, i);
+ r = rebalance2(s, info, vt, i);
else if (!has_right_sibling)
- r = rebalance2(s, info, i - 1);
+ r = rebalance2(s, info, vt, i - 1);
else
- r = rebalance3(s, info, i - 1);
+ r = rebalance3(s, info, vt, i - 1);
return r;
}
if (le32_to_cpu(n->header.flags) & LEAF_NODE)
return do_leaf(n, key, index);
- r = rebalance_children(s, info, key);
+ r = rebalance_children(s, info, vt, key);
if (r)
break;
return r;
}
+static struct dm_btree_value_type le64_type = {
+ .context = NULL,
+ .size = sizeof(__le64),
+ .inc = NULL,
+ .dec = NULL,
+ .equal = NULL
+};
+
int dm_btree_remove(struct dm_btree_info *info, dm_block_t root,
uint64_t *keys, dm_block_t *new_root)
{
bi->bi_next = NULL;
if (rrdev)
set_bit(R5_DOUBLE_LOCKED, &sh->dev[i].flags);
- trace_block_bio_remap(bdev_get_queue(bi->bi_bdev),
- bi, disk_devt(conf->mddev->gendisk),
- sh->dev[i].sector);
+
+ if (conf->mddev->gendisk)
+ trace_block_bio_remap(bdev_get_queue(bi->bi_bdev),
+ bi, disk_devt(conf->mddev->gendisk),
+ sh->dev[i].sector);
generic_make_request(bi);
}
if (rrdev) {
rbi->bi_io_vec[0].bv_offset = 0;
rbi->bi_size = STRIPE_SIZE;
rbi->bi_next = NULL;
- trace_block_bio_remap(bdev_get_queue(rbi->bi_bdev),
- rbi, disk_devt(conf->mddev->gendisk),
- sh->dev[i].sector);
+ if (conf->mddev->gendisk)
+ trace_block_bio_remap(bdev_get_queue(rbi->bi_bdev),
+ rbi, disk_devt(conf->mddev->gendisk),
+ sh->dev[i].sector);
generic_make_request(rbi);
}
if (!rdev && !rrdev) {
int level = conf->level;
if (rcw) {
- /* if we are not expanding this is a proper write request, and
- * there will be bios with new data to be drained into the
- * stripe cache
- */
- if (!expand) {
- sh->reconstruct_state = reconstruct_state_drain_run;
- set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
- } else
- sh->reconstruct_state = reconstruct_state_run;
-
- set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
s->locked++;
}
}
+ /* if we are not expanding this is a proper write request, and
+ * there will be bios with new data to be drained into the
+ * stripe cache
+ */
+ if (!expand) {
+ if (!s->locked)
+ /* False alarm, nothing to do */
+ return;
+ sh->reconstruct_state = reconstruct_state_drain_run;
+ set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
+ } else
+ sh->reconstruct_state = reconstruct_state_run;
+
+ set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
+
if (s->locked + conf->max_degraded == disks)
if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
atomic_inc(&conf->pending_full_writes);
BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) ||
test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags)));
- sh->reconstruct_state = reconstruct_state_prexor_drain_run;
- set_bit(STRIPE_OP_PREXOR, &s->ops_request);
- set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
- set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
-
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
if (i == pd_idx)
s->locked++;
}
}
+ if (!s->locked)
+ /* False alarm - nothing to do */
+ return;
+ sh->reconstruct_state = reconstruct_state_prexor_drain_run;
+ set_bit(STRIPE_OP_PREXOR, &s->ops_request);
+ set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
+ set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
}
/* keep the parity disk(s) locked while asynchronous operations
int i;
clear_bit(STRIPE_SYNCING, &sh->state);
+ if (test_and_clear_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags))
+ wake_up(&conf->wait_for_overlap);
s->syncing = 0;
s->replacing = 0;
/* There is nothing more to do for sync/check/repair.
{
int i;
struct r5dev *dev;
+ int discard_pending = 0;
for (i = disks; i--; )
if (sh->dev[i].written) {
STRIPE_SECTORS,
!test_bit(STRIPE_DEGRADED, &sh->state),
0);
- }
- } else if (test_bit(R5_Discard, &sh->dev[i].flags))
- clear_bit(R5_Discard, &sh->dev[i].flags);
+ } else if (test_bit(R5_Discard, &dev->flags))
+ discard_pending = 1;
+ }
+ if (!discard_pending &&
+ test_bit(R5_Discard, &sh->dev[sh->pd_idx].flags)) {
+ clear_bit(R5_Discard, &sh->dev[sh->pd_idx].flags);
+ clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
+ if (sh->qd_idx >= 0) {
+ clear_bit(R5_Discard, &sh->dev[sh->qd_idx].flags);
+ clear_bit(R5_UPTODATE, &sh->dev[sh->qd_idx].flags);
+ }
+ /* now that discard is done we can proceed with any sync */
+ clear_bit(STRIPE_DISCARD, &sh->state);
+ if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state))
+ set_bit(STRIPE_HANDLE, &sh->state);
+
+ }
if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
if (atomic_dec_and_test(&conf->pending_full_writes))
set_bit(STRIPE_HANDLE, &sh->state);
if (rmw < rcw && rmw > 0) {
/* prefer read-modify-write, but need to get some data */
- blk_add_trace_msg(conf->mddev->queue, "raid5 rmw %llu %d",
- (unsigned long long)sh->sector, rmw);
+ if (conf->mddev->queue)
+ blk_add_trace_msg(conf->mddev->queue,
+ "raid5 rmw %llu %d",
+ (unsigned long long)sh->sector, rmw);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
if ((dev->towrite || i == sh->pd_idx) &&
}
}
}
- if (rcw)
+ if (rcw && conf->mddev->queue)
blk_add_trace_msg(conf->mddev->queue, "raid5 rcw %llu %d %d %d",
(unsigned long long)sh->sector,
rcw, qread, test_bit(STRIPE_DELAYED, &sh->state));
return;
}
- if (test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
- set_bit(STRIPE_SYNCING, &sh->state);
- clear_bit(STRIPE_INSYNC, &sh->state);
+ if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
+ spin_lock(&sh->stripe_lock);
+ /* Cannot process 'sync' concurrently with 'discard' */
+ if (!test_bit(STRIPE_DISCARD, &sh->state) &&
+ test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
+ set_bit(STRIPE_SYNCING, &sh->state);
+ clear_bit(STRIPE_INSYNC, &sh->state);
+ }
+ spin_unlock(&sh->stripe_lock);
}
clear_bit(STRIPE_DELAYED, &sh->state);
test_bit(STRIPE_INSYNC, &sh->state)) {
md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
clear_bit(STRIPE_SYNCING, &sh->state);
+ if (test_and_clear_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags))
+ wake_up(&conf->wait_for_overlap);
}
/* If the failed drives are just a ReadError, then we might need
atomic_inc(&conf->active_aligned_reads);
spin_unlock_irq(&conf->device_lock);
- trace_block_bio_remap(bdev_get_queue(align_bi->bi_bdev),
- align_bi, disk_devt(mddev->gendisk),
- raid_bio->bi_sector);
+ if (mddev->gendisk)
+ trace_block_bio_remap(bdev_get_queue(align_bi->bi_bdev),
+ align_bi, disk_devt(mddev->gendisk),
+ raid_bio->bi_sector);
generic_make_request(align_bi);
return 1;
} else {
}
spin_unlock_irq(&conf->device_lock);
}
- trace_block_unplug(mddev->queue, cnt, !from_schedule);
+ if (mddev->queue)
+ trace_block_unplug(mddev->queue, cnt, !from_schedule);
kfree(cb);
}
sh = get_active_stripe(conf, logical_sector, 0, 0, 0);
prepare_to_wait(&conf->wait_for_overlap, &w,
TASK_UNINTERRUPTIBLE);
+ set_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags);
+ if (test_bit(STRIPE_SYNCING, &sh->state)) {
+ release_stripe(sh);
+ schedule();
+ goto again;
+ }
+ clear_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags);
spin_lock_irq(&sh->stripe_lock);
for (d = 0; d < conf->raid_disks; d++) {
if (d == sh->pd_idx || d == sh->qd_idx)
goto again;
}
}
+ set_bit(STRIPE_DISCARD, &sh->state);
finish_wait(&conf->wait_for_overlap, &w);
for (d = 0; d < conf->raid_disks; d++) {
if (d == sh->pd_idx || d == sh->qd_idx)
struct stripe_operations {
int target, target2;
enum sum_check_flags zero_sum_result;
- #ifdef CONFIG_MULTICORE_RAID456
- unsigned long request;
- wait_queue_head_t wait_for_ops;
- #endif
} ops;
struct r5dev {
/* rreq and rvec are used for the replacement device when
STRIPE_COMPUTE_RUN,
STRIPE_OPS_REQ_PENDING,
STRIPE_ON_UNPLUG_LIST,
+ STRIPE_DISCARD,
};
/*
if (enable) {
if (is_code(code, M5MOLS_RESTYPE_MONITOR))
ret = m5mols_start_monitor(info);
- if (is_code(code, M5MOLS_RESTYPE_CAPTURE))
+ else if (is_code(code, M5MOLS_RESTYPE_CAPTURE))
ret = m5mols_start_capture(info);
else
ret = -EINVAL;
vdelay start of active video in 2 * field lines relative to
trailing edge of /VRESET pulse (VDELAY register).
sheight height of active video in 2 * field lines.
+ extraheight Added to sheight for cropcap.bounds.height only
videostart0 ITU-R frame line number of the line corresponding
to vdelay in the first field. */
#define CROPCAP(minhdelayx1, hdelayx1, swidth, totalwidth, sqwidth, \
- vdelay, sheight, videostart0) \
+ vdelay, sheight, extraheight, videostart0) \
.cropcap.bounds.left = minhdelayx1, \
/* * 2 because vertically we count field lines times two, */ \
/* e.g. 23 * 2 to 23 * 2 + 576 in PAL-BGHI defrect. */ \
.cropcap.bounds.top = (videostart0) * 2 - (vdelay) + MIN_VDELAY, \
/* 4 is a safety margin at the end of the line. */ \
.cropcap.bounds.width = (totalwidth) - (minhdelayx1) - 4, \
- .cropcap.bounds.height = (sheight) + (vdelay) - MIN_VDELAY, \
+ .cropcap.bounds.height = (sheight) + (extraheight) + (vdelay) - \
+ MIN_VDELAY, \
.cropcap.defrect.left = hdelayx1, \
.cropcap.defrect.top = (videostart0) * 2, \
.cropcap.defrect.width = swidth, \
/* totalwidth */ 1135,
/* sqwidth */ 944,
/* vdelay */ 0x20,
- /* bt878 (and bt848?) can capture another
- line below active video. */
- /* sheight */ (576 + 2) + 0x20 - 2,
+ /* sheight */ 576,
+ /* bt878 (and bt848?) can capture another
+ line below active video. */
+ /* extraheight */ 2,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
/* sqwidth */ 780,
/* vdelay */ 0x1a,
/* sheight */ 480,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_SECAM,
/* sqwidth */ 944,
/* vdelay */ 0x20,
/* sheight */ 576,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_PAL_Nc,
/* sqwidth */ 780,
/* vdelay */ 0x1a,
/* sheight */ 576,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_PAL_M,
/* sqwidth */ 780,
/* vdelay */ 0x1a,
/* sheight */ 480,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_PAL_N,
/* sqwidth */ 944,
/* vdelay */ 0x20,
/* sheight */ 576,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_NTSC_M_JP,
/* sqwidth */ 780,
/* vdelay */ 0x16,
/* sheight */ 480,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
/* that one hopefully works with the strange timing
/* sqwidth */ 944,
/* vdelay */ 0x1a,
/* sheight */ 480,
+ /* extraheight */ 0,
/* videostart0 */ 23)
}
};
config VIDEO_SH_VEU
tristate "SuperH VEU mem2mem video processing driver"
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV && VIDEO_V4L2 && GENERIC_HARDIRQS
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
static int gsc_m2m_resume(struct gsc_dev *gsc)
{
+ struct gsc_ctx *ctx;
unsigned long flags;
spin_lock_irqsave(&gsc->slock, flags);
/* Clear for full H/W setup in first run after resume */
+ ctx = gsc->m2m.ctx;
gsc->m2m.ctx = NULL;
spin_unlock_irqrestore(&gsc->slock, flags);
if (test_and_clear_bit(ST_M2M_SUSPENDED, &gsc->state))
- gsc_m2m_job_finish(gsc->m2m.ctx,
- VB2_BUF_STATE_ERROR);
+ gsc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
+
return 0;
}
/* Do not resume if the device was idle before system suspend */
spin_lock_irqsave(&gsc->slock, flags);
if (!test_and_clear_bit(ST_SUSPEND, &gsc->state) ||
- !gsc_m2m_active(gsc)) {
+ !gsc_m2m_opened(gsc)) {
spin_unlock_irqrestore(&gsc->slock, flags);
return 0;
}
static int fimc_m2m_resume(struct fimc_dev *fimc)
{
+ struct fimc_ctx *ctx;
unsigned long flags;
spin_lock_irqsave(&fimc->slock, flags);
/* Clear for full H/W setup in first run after resume */
+ ctx = fimc->m2m.ctx;
fimc->m2m.ctx = NULL;
spin_unlock_irqrestore(&fimc->slock, flags);
if (test_and_clear_bit(ST_M2M_SUSPENDED, &fimc->state))
- fimc_m2m_job_finish(fimc->m2m.ctx,
- VB2_BUF_STATE_ERROR);
+ fimc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
+
return 0;
}
void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f)
{
enum v4l2_mbus_pixelcode pixelcode = dev->fmt->mbus_code;
- unsigned int i = ARRAY_SIZE(src_pixfmt_map);
+ int i = ARRAY_SIZE(src_pixfmt_map);
u32 cfg;
- while (i-- >= 0) {
+ while (--i >= 0) {
if (src_pixfmt_map[i][0] == pixelcode)
break;
}
{ V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CIODMAFMT_CRYCBY },
};
u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT);
- unsigned int i = ARRAY_SIZE(pixcode);
+ int i = ARRAY_SIZE(pixcode);
- while (i-- >= 0)
+ while (--i >= 0)
if (pixcode[i][0] == dev->fmt->mbus_code)
break;
cfg &= ~FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK;
.id = V4L2_CTRL_CLASS_USER | 0x1001,
.type = V4L2_CTRL_TYPE_BOOLEAN,
.name = "Test Pattern 640x480",
+ .step = 1,
};
static int fimc_lite_create_capture_subdev(struct fimc_lite *fimc)
struct fimc_pipeline *pipeline;
struct v4l2_subdev *sd;
struct mutex *lock;
- int ret = 0;
+ int i, ret = 0;
int ref_count;
if (media_entity_type(sink->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
return 0;
}
+ mutex_lock(lock);
+ ref_count = fimc ? fimc->vid_cap.refcnt : fimc_lite->ref_count;
+
if (!(flags & MEDIA_LNK_FL_ENABLED)) {
- int i;
- mutex_lock(lock);
- ret = __fimc_pipeline_close(pipeline);
+ if (ref_count > 0) {
+ ret = __fimc_pipeline_close(pipeline);
+ if (!ret && fimc)
+ fimc_ctrls_delete(fimc->vid_cap.ctx);
+ }
for (i = 0; i < IDX_MAX; i++)
pipeline->subdevs[i] = NULL;
- if (fimc)
- fimc_ctrls_delete(fimc->vid_cap.ctx);
- mutex_unlock(lock);
- return ret;
+ } else if (ref_count > 0) {
+ /*
+ * Link activation. Enable power of pipeline elements only if
+ * the pipeline is already in use, i.e. its video node is open.
+ * Recreate the controls destroyed during the link deactivation.
+ */
+ ret = __fimc_pipeline_open(pipeline,
+ source->entity, true);
+ if (!ret && fimc)
+ ret = fimc_capture_ctrls_create(fimc);
}
- /*
- * Link activation. Enable power of pipeline elements only if the
- * pipeline is already in use, i.e. its video node is opened.
- * Recreate the controls destroyed during the link deactivation.
- */
- mutex_lock(lock);
-
- ref_count = fimc ? fimc->vid_cap.refcnt : fimc_lite->ref_count;
- if (ref_count > 0)
- ret = __fimc_pipeline_open(pipeline, source->entity, true);
- if (!ret && fimc)
- ret = fimc_capture_ctrls_create(fimc);
mutex_unlock(lock);
return ret ? -EPIPE : ret;
unsigned int frame_type;
dspl_y_addr = s5p_mfc_hw_call(dev->mfc_ops, get_dspl_y_adr, dev);
- frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_dec_frame_type, dev);
+ frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_disp_frame_type, ctx);
/* If frame is same as previous then skip and do not dequeue */
if (frame_type == S5P_FIMV_DECODE_FRAME_SKIPPED) {
.minimum = 0,
.maximum = 1,
.default_value = 0,
+ .step = 1,
.menu_skip_mask = 0,
},
{
static int usb_ma901radio_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
+ struct usb_device *dev = interface_to_usbdev(intf);
struct ma901radio_device *radio;
int retval = 0;
+ /* Masterkit MA901 usb radio has the same USB ID as many others
+ * Atmel V-USB devices. Let's make additional checks to be sure
+ * that this is our device.
+ */
+
+ if (dev->product && dev->manufacturer &&
+ (strncmp(dev->product, "MA901", 5) != 0
+ || strncmp(dev->manufacturer, "www.masterkit.ru", 16) != 0))
+ return -ENODEV;
+
radio = kzalloc(sizeof(struct ma901radio_device), GFP_KERNEL);
if (!radio) {
dev_err(&intf->dev, "kzalloc for ma901radio_device failed\n");
config IR_RX51
tristate "Nokia N900 IR transmitter diode"
- depends on OMAP_DM_TIMER && LIRC && !ARCH_MULTIPLATFORM
+ depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM
---help---
Say Y or M here if you want to enable support for the IR
transmitter diode built in the Nokia N900 (RX51) device.
videodev-objs += v4l2-compat-ioctl32.o
endif
-obj-$(CONFIG_VIDEO_DEV) += videodev.o
+obj-$(CONFIG_VIDEO_V4L2) += videodev.o
obj-$(CONFIG_VIDEO_V4L2_INT_DEVICE) += v4l2-int-device.o
obj-$(CONFIG_VIDEO_V4L2) += v4l2-common.o
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
+ select POWER_SUPPLY
select MFD_CORE
select IRQ_DOMAIN
help
static int ab8500_gpadc_runtime_resume(struct device *dev)
{
struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+ int ret;
- regulator_enable(gpadc->regu);
- return 0;
+ ret = regulator_enable(gpadc->regu);
+ if (ret)
+ dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
+ return ret;
}
static int ab8500_gpadc_runtime_idle(struct device *dev)
}
/* VTVout LDO used to power up ab8500-GPADC */
- gpadc->regu = regulator_get(&pdev->dev, "vddadc");
+ gpadc->regu = devm_regulator_get(&pdev->dev, "vddadc");
if (IS_ERR(gpadc->regu)) {
ret = PTR_ERR(gpadc->regu);
dev_err(gpadc->dev, "failed to get vtvout LDO\n");
platform_set_drvdata(pdev, gpadc);
- regulator_enable(gpadc->regu);
+ ret = regulator_enable(gpadc->regu);
+ if (ret) {
+ dev_err(gpadc->dev, "Failed to enable vtvout LDO: %d\n", ret);
+ goto fail_enable;
+ }
pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY);
pm_runtime_use_autosuspend(gpadc->dev);
list_add_tail(&gpadc->node, &ab8500_gpadc_list);
dev_dbg(gpadc->dev, "probe success\n");
return 0;
+
+fail_enable:
fail_irq:
free_irq(gpadc->irq, gpadc);
fail:
switch (omap->usbhs_rev) {
case OMAP_USBHS_REV1:
- omap_usbhs_rev1_hostconfig(omap, reg);
+ reg = omap_usbhs_rev1_hostconfig(omap, reg);
break;
case OMAP_USBHS_REV2:
- omap_usbhs_rev2_hostconfig(omap, reg);
+ reg = omap_usbhs_rev2_hostconfig(omap, reg);
break;
default: /* newer revisions */
- omap_usbhs_rev2_hostconfig(omap, reg);
+ reg = omap_usbhs_rev2_hostconfig(omap, reg);
break;
}
PALMAS_INT1_MASK),
};
-static void palmas_dt_to_pdata(struct device_node *node,
+static int palmas_set_pdata_irq_flag(struct i2c_client *i2c,
struct palmas_platform_data *pdata)
{
+ struct irq_data *irq_data = irq_get_irq_data(i2c->irq);
+ if (!irq_data) {
+ dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq);
+ return -EINVAL;
+ }
+
+ pdata->irq_flags = irqd_get_trigger_type(irq_data);
+ dev_info(&i2c->dev, "Irq flag is 0x%08x\n", pdata->irq_flags);
+ return 0;
+}
+
+static void palmas_dt_to_pdata(struct i2c_client *i2c,
+ struct palmas_platform_data *pdata)
+{
+ struct device_node *node = i2c->dev.of_node;
int ret;
u32 prop;
pdata->power_ctrl = PALMAS_POWER_CTRL_NSLEEP_MASK |
PALMAS_POWER_CTRL_ENABLE1_MASK |
PALMAS_POWER_CTRL_ENABLE2_MASK;
+ if (i2c->irq)
+ palmas_set_pdata_irq_flag(i2c, pdata);
}
static int palmas_i2c_probe(struct i2c_client *i2c,
if (!pdata)
return -ENOMEM;
- palmas_dt_to_pdata(node, pdata);
+ palmas_dt_to_pdata(i2c, pdata);
}
if (!pdata)
}
}
+ /* Change interrupt line output polarity */
+ if (pdata->irq_flags & IRQ_TYPE_LEVEL_HIGH)
+ reg = PALMAS_POLARITY_CTRL_INT_POLARITY;
+ else
+ reg = 0;
+ ret = palmas_update_bits(palmas, PALMAS_PU_PD_OD_BASE,
+ PALMAS_POLARITY_CTRL, PALMAS_POLARITY_CTRL_INT_POLARITY,
+ reg);
+ if (ret < 0) {
+ dev_err(palmas->dev, "POLARITY_CTRL updat failed: %d\n", ret);
+ goto err;
+ }
+
/* Change IRQ into clear on read mode for efficiency */
slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE);
addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL);
regmap_write(palmas->regmap[slave], addr, reg);
ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq,
- IRQF_ONESHOT | IRQF_TRIGGER_LOW, 0, &palmas_irq_chip,
+ IRQF_ONESHOT | pdata->irq_flags, 0, &palmas_irq_chip,
&palmas->irq_data);
if (ret < 0)
goto err;
void tps65912_device_exit(struct tps65912 *tps65912)
{
mfd_remove_devices(tps65912->dev);
+ tps65912_irq_exit(tps65912);
kfree(tps65912);
}
* Disable the resource.
* The function returns with error or the content of the register
*/
-int twl4030_audio_disable_resource(unsigned id)
+int twl4030_audio_disable_resource(enum twl4030_audio_res id)
{
struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev);
int val;
static struct platform_driver twl4030_madc_driver = {
.probe = twl4030_madc_probe,
- .remove = __exit_p(twl4030_madc_remove),
+ .remove = twl4030_madc_remove,
.driver = {
.name = "twl4030_madc",
.owner = THIS_MODULE,
mei_hcsr_set(hw, hcsr);
}
+/**
+ * mei_me_hw_reset_release - release device from the reset
+ *
+ * @dev: the device structure
+ */
+static void mei_me_hw_reset_release(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 hcsr = mei_hcsr_read(hw);
+
+ hcsr |= H_IG;
+ hcsr &= ~H_RST;
+ mei_hcsr_set(hw, hcsr);
+}
/**
* mei_me_hw_reset - resets fw via mei csr register.
*
if (intr_enable)
hcsr |= H_IE;
else
- hcsr &= ~H_IE;
-
- mei_hcsr_set(hw, hcsr);
-
- hcsr = mei_hcsr_read(hw) | H_IG;
- hcsr &= ~H_RST;
+ hcsr |= ~H_IE;
mei_hcsr_set(hw, hcsr);
- hcsr = mei_hcsr_read(hw);
+ if (dev->dev_state == MEI_DEV_POWER_DOWN)
+ mei_me_hw_reset_release(dev);
- dev_dbg(&dev->pdev->dev, "current HCSR = 0x%08x.\n", hcsr);
+ dev_dbg(&dev->pdev->dev, "current HCSR = 0x%08x.\n", mei_hcsr_read(hw));
}
/**
mutex_unlock(&dev->device_lock);
return IRQ_HANDLED;
} else {
- dev_dbg(&dev->pdev->dev, "FW not ready.\n");
+ dev_dbg(&dev->pdev->dev, "Reset Completed.\n");
+ mei_me_hw_reset_release(dev);
mutex_unlock(&dev->device_lock);
return IRQ_HANDLED;
}
mei_cl_all_write_clear(dev);
}
+void mei_stop(struct mei_device *dev)
+{
+ dev_dbg(&dev->pdev->dev, "stopping the device.\n");
+
+ mutex_lock(&dev->device_lock);
+
+ cancel_delayed_work(&dev->timer_work);
+
+ mei_wd_stop(dev);
+
+ dev->dev_state = MEI_DEV_POWER_DOWN;
+ mei_reset(dev, 0);
+
+ mutex_unlock(&dev->device_lock);
+
+ flush_scheduled_work();
+}
+
void mei_device_init(struct mei_device *dev);
void mei_reset(struct mei_device *dev, int interrupts);
int mei_hw_init(struct mei_device *dev);
+void mei_stop(struct mei_device *dev);
/*
* MEI interrupt functions prototype
hw = to_me_hw(dev);
- mutex_lock(&dev->device_lock);
-
- cancel_delayed_work(&dev->timer_work);
- mei_wd_stop(dev);
+ dev_err(&pdev->dev, "stop\n");
+ mei_stop(dev);
mei_pdev = NULL;
- if (dev->iamthif_cl.state == MEI_FILE_CONNECTED) {
- dev->iamthif_cl.state = MEI_FILE_DISCONNECTING;
- mei_cl_disconnect(&dev->iamthif_cl);
- }
- if (dev->wd_cl.state == MEI_FILE_CONNECTED) {
- dev->wd_cl.state = MEI_FILE_DISCONNECTING;
- mei_cl_disconnect(&dev->wd_cl);
- }
-
- /* Unregistering watchdog device */
mei_watchdog_unregister(dev);
- /* remove entry if already in list */
- dev_dbg(&pdev->dev, "list del iamthif and wd file list.\n");
-
- if (dev->open_handle_count > 0)
- dev->open_handle_count--;
- mei_cl_unlink(&dev->wd_cl);
-
- if (dev->open_handle_count > 0)
- dev->open_handle_count--;
- mei_cl_unlink(&dev->iamthif_cl);
-
- dev->iamthif_current_cb = NULL;
- dev->me_clients_num = 0;
-
- mutex_unlock(&dev->device_lock);
-
- flush_scheduled_work();
-
/* disable interrupts */
mei_disable_interrupts(dev);
{
struct pci_dev *pdev = to_pci_dev(device);
struct mei_device *dev = pci_get_drvdata(pdev);
- int err;
if (!dev)
return -ENODEV;
- mutex_lock(&dev->device_lock);
- cancel_delayed_work(&dev->timer_work);
+ dev_err(&pdev->dev, "suspend\n");
- /* Stop watchdog if exists */
- err = mei_wd_stop(dev);
- /* Set new mei state */
- if (dev->dev_state == MEI_DEV_ENABLED ||
- dev->dev_state == MEI_DEV_RECOVERING_FROM_RESET) {
- dev->dev_state = MEI_DEV_POWER_DOWN;
- mei_reset(dev, 0);
- }
- mutex_unlock(&dev->device_lock);
+ mei_stop(dev);
+
+ mei_disable_interrupts(dev);
free_irq(pdev->irq, dev);
pci_disable_msi(pdev);
- return err;
+ return 0;
}
static int mei_pci_resume(struct device *device)
struct delayed_datagram_info {
struct datagram_entry *entry;
- struct vmci_datagram msg;
struct work_struct work;
bool in_dg_host_queue;
+ /* msg and msg_payload must be together. */
+ struct vmci_datagram msg;
+ u8 msg_payload[];
};
/* Number of in-flight host->host datagrams */
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
- depends on MMC_SDHCI && PLAT_SAMSUNG
+ depends on MMC_SDHCI && PLAT_SAMSUNG_SINGLE
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the Samsung S3C
#include <mach/dma.h>
-#include <mach/regs-sdi.h>
-
#include <linux/platform_data/mmc-s3cmci.h>
#include "s3cmci.h"
#define DRIVER_NAME "s3c-mci"
+#define S3C2410_SDICON (0x00)
+#define S3C2410_SDIPRE (0x04)
+#define S3C2410_SDICMDARG (0x08)
+#define S3C2410_SDICMDCON (0x0C)
+#define S3C2410_SDICMDSTAT (0x10)
+#define S3C2410_SDIRSP0 (0x14)
+#define S3C2410_SDIRSP1 (0x18)
+#define S3C2410_SDIRSP2 (0x1C)
+#define S3C2410_SDIRSP3 (0x20)
+#define S3C2410_SDITIMER (0x24)
+#define S3C2410_SDIBSIZE (0x28)
+#define S3C2410_SDIDCON (0x2C)
+#define S3C2410_SDIDCNT (0x30)
+#define S3C2410_SDIDSTA (0x34)
+#define S3C2410_SDIFSTA (0x38)
+
+#define S3C2410_SDIDATA (0x3C)
+#define S3C2410_SDIIMSK (0x40)
+
+#define S3C2440_SDIDATA (0x40)
+#define S3C2440_SDIIMSK (0x3C)
+
+#define S3C2440_SDICON_SDRESET (1 << 8)
+#define S3C2410_SDICON_SDIOIRQ (1 << 3)
+#define S3C2410_SDICON_FIFORESET (1 << 1)
+#define S3C2410_SDICON_CLOCKTYPE (1 << 0)
+
+#define S3C2410_SDICMDCON_LONGRSP (1 << 10)
+#define S3C2410_SDICMDCON_WAITRSP (1 << 9)
+#define S3C2410_SDICMDCON_CMDSTART (1 << 8)
+#define S3C2410_SDICMDCON_SENDERHOST (1 << 6)
+#define S3C2410_SDICMDCON_INDEX (0x3f)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12)
+#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10)
+#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9)
+
+#define S3C2440_SDIDCON_DS_WORD (2 << 22)
+#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20)
+#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19)
+#define S3C2410_SDIDCON_BLOCKMODE (1 << 17)
+#define S3C2410_SDIDCON_WIDEBUS (1 << 16)
+#define S3C2410_SDIDCON_DMAEN (1 << 15)
+#define S3C2410_SDIDCON_STOP (1 << 14)
+#define S3C2440_SDIDCON_DATSTART (1 << 14)
+
+#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12)
+#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12)
+
+#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
+
+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1 << 9)
+#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8)
+#define S3C2410_SDIDSTA_CRCFAIL (1 << 7)
+#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6)
+#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5)
+#define S3C2410_SDIDSTA_XFERFINISH (1 << 4)
+#define S3C2410_SDIDSTA_TXDATAON (1 << 1)
+#define S3C2410_SDIDSTA_RXDATAON (1 << 0)
+
+#define S3C2440_SDIFSTA_FIFORESET (1 << 16)
+#define S3C2440_SDIFSTA_FIFOFAIL (3 << 14)
+#define S3C2410_SDIFSTA_TFDET (1 << 13)
+#define S3C2410_SDIFSTA_RFDET (1 << 12)
+#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC (1 << 17)
+#define S3C2410_SDIIMSK_CMDSENT (1 << 16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT (1 << 15)
+#define S3C2410_SDIIMSK_RESPONSEND (1 << 14)
+#define S3C2410_SDIIMSK_SDIOIRQ (1 << 12)
+#define S3C2410_SDIIMSK_FIFOFAIL (1 << 11)
+#define S3C2410_SDIIMSK_CRCSTATUS (1 << 10)
+#define S3C2410_SDIIMSK_DATACRC (1 << 9)
+#define S3C2410_SDIIMSK_DATATIMEOUT (1 << 8)
+#define S3C2410_SDIIMSK_DATAFINISH (1 << 7)
+#define S3C2410_SDIIMSK_TXFIFOHALF (1 << 4)
+#define S3C2410_SDIIMSK_RXFIFOLAST (1 << 2)
+#define S3C2410_SDIIMSK_RXFIFOHALF (1 << 0)
+
enum dbg_channels {
dbg_err = (1 << 0),
dbg_debug = (1 << 1),
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/mmc/host.h>
-#include <plat/sdhci.h>
-#include <plat/regs-sdhci.h>
-
+#include "sdhci-s3c-regs.h"
#include "sdhci.h"
#define MAX_BUS_CLK (4)
/* 10 parts were found on sflash on Netgear WNDR4500 */
#define BCM47XXPART_MAX_PARTS 12
+/*
+ * Amount of bytes we read when analyzing each block of flash memory.
+ * Set it big enough to allow detecting partition and reading important data.
+ */
+#define BCM47XXPART_BYTES_TO_READ 0x404
+
/* Magics */
#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
#define POT_MAGIC1 0x54544f50 /* POTT */
struct trx_header *trx;
int trx_part = -1;
int last_trx_part = -1;
- int max_bytes_to_read = 0x8004;
+ int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
if (blocksize <= 0x10000)
blocksize = 0x10000;
- if (blocksize == 0x20000)
- max_bytes_to_read = 0x18004;
/* Alloc */
parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
GFP_KERNEL);
- buf = kzalloc(max_bytes_to_read, GFP_KERNEL);
+ buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
/* Parse block by block looking for magics */
for (offset = 0; offset <= master->size - blocksize;
}
/* Read beginning of the block */
- if (mtd_read(master, offset, max_bytes_to_read,
+ if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
&bytes_read, (uint8_t *)buf) < 0) {
pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
offset);
continue;
}
- /* Standard NVRAM */
- if (buf[0x000 / 4] == NVRAM_HEADER ||
- buf[0x1000 / 4] == NVRAM_HEADER ||
- buf[0x8000 / 4] == NVRAM_HEADER ||
- (blocksize == 0x20000 && (
- buf[0x10000 / 4] == NVRAM_HEADER ||
- buf[0x11000 / 4] == NVRAM_HEADER ||
- buf[0x18000 / 4] == NVRAM_HEADER))) {
- bcm47xxpart_add_part(&parts[curr_part++], "nvram",
- offset, 0);
- offset = rounddown(offset, blocksize);
- continue;
- }
-
/*
* board_data starts with board_id which differs across boards,
* but we can use 'MPFR' (hopefully) magic at 0x100
continue;
}
}
+
+ /* Look for NVRAM at the end of the last block. */
+ for (i = 0; i < ARRAY_SIZE(possible_nvram_sizes); i++) {
+ if (curr_part > BCM47XXPART_MAX_PARTS) {
+ pr_warn("Reached maximum number of partitions, scanning stopped!\n");
+ break;
+ }
+
+ offset = master->size - possible_nvram_sizes[i];
+ if (mtd_read(master, offset, 0x4, &bytes_read,
+ (uint8_t *)buf) < 0) {
+ pr_err("mtd_read error while reading at offset 0x%X!\n",
+ offset);
+ continue;
+ }
+
+ /* Standard NVRAM */
+ if (buf[0] == NVRAM_HEADER) {
+ bcm47xxpart_add_part(&parts[curr_part++], "nvram",
+ master->size - blocksize, 0);
+ break;
+ }
+ }
+
kfree(buf);
/*
oobreadlen -= toread;
}
}
+
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
} else {
memcpy(buf, chip->buffers->databuf + col, bytes);
buf += bytes;
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
+
readlen -= len;
if (!readlen)
break;
* 512 512 Byte page size
*/
struct nand_flash_dev nand_flash_ids[] = {
+#define SP_OPTIONS NAND_NEED_READRDY
+#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16)
#ifdef CONFIG_MTD_NAND_MUSEUM_IDS
- {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
- {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
- {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
- {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
-
- {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
- {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
- {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, SP_OPTIONS},
+
+ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, SP_OPTIONS16},
+ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, SP_OPTIONS16},
#endif
- {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
- {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
- {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
- {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
- {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
- {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
- {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
- {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
+ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, SP_OPTIONS16},
+ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, SP_OPTIONS16},
+
+ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, SP_OPTIONS16},
+ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, SP_OPTIONS16},
+
+ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, SP_OPTIONS16},
+ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, SP_OPTIONS16},
+
+ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, SP_OPTIONS16},
+
+ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, SP_OPTIONS},
/*
* These are the new chips with large page size. The pagesize and the
#include <linux/mtd/partitions.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <asm/mach/flash.h>
-#include <plat/regs-onenand.h>
-#include <linux/io.h>
+#include "samsung.h"
enum soc_type {
TYPE_S3C6400,
#ifndef __SAMSUNG_ONENAND_H__
#define __SAMSUNG_ONENAND_H__
-#include <mach/hardware.h>
-
/*
* OneNAND Controller
*/
bond_compute_features(bond);
+ bond_update_speed_duplex(new_slave);
+
read_lock(&bond->lock);
new_slave->last_arp_rx = jiffies -
new_slave->link == BOND_LINK_DOWN ? "DOWN" :
(new_slave->link == BOND_LINK_UP ? "UP" : "BACK"));
- bond_update_speed_duplex(new_slave);
-
if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
/* if there is a primary slave, remember it */
if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
}
block_netpoll_tx();
- call_netdevice_notifiers(NETDEV_RELEASE, bond_dev);
write_lock_bh(&bond->lock);
slave = bond_get_slave_by_dev(bond, slave_dev);
return -EINVAL;
}
+ write_unlock_bh(&bond->lock);
/* unregister rx_handler early so bond_handle_frame wouldn't be called
* for this slave anymore.
*/
netdev_rx_handler_unregister(slave_dev);
- write_unlock_bh(&bond->lock);
- synchronize_net();
write_lock_bh(&bond->lock);
if (!all && !bond->params.fail_over_mac) {
write_unlock_bh(&bond->lock);
unblock_netpoll_tx();
- if (bond->slave_cnt == 0)
+ if (bond->slave_cnt == 0) {
call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev);
+ call_netdevice_notifiers(NETDEV_RELEASE, bond->dev);
+ }
bond_compute_features(bond);
if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
bond_set_backup_slave(slave);
}
- bond_update_speed_duplex(slave);
-
pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n",
bond->dev->name, slave->dev->name,
slave->speed, slave->duplex ? "full" : "half");
bond_destroy_debugfs();
- rtnl_link_unregister(&bond_link_ops);
unregister_pernet_subsys(&bond_net_ops);
+ rtnl_link_unregister(&bond_link_ops);
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
sprintf(linkname, "slave_%s", slave->name);
ret = sysfs_create_link(&(master->dev.kobj), &(slave->dev.kobj),
linkname);
+
+ /* free the master link created earlier in case of error */
+ if (ret)
+ sysfs_remove_link(&(slave->dev.kobj), "master");
+
return ret;
}
goto out;
}
if (new_value < 0) {
- pr_err("%s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
+ pr_err("%s: Invalid arp_interval value %d not in range 0-%d; rejected.\n",
bond->dev->name, new_value, INT_MAX);
ret = -EINVAL;
goto out;
pr_info("%s: Setting ARP monitoring interval to %d.\n",
bond->dev->name, new_value);
bond->params.arp_interval = new_value;
- if (bond->params.miimon) {
- pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
- bond->dev->name, bond->dev->name);
- bond->params.miimon = 0;
- }
- if (!bond->params.arp_targets[0]) {
- pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
- bond->dev->name);
+ if (new_value) {
+ if (bond->params.miimon) {
+ pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
+ bond->dev->name, bond->dev->name);
+ bond->params.miimon = 0;
+ }
+ if (!bond->params.arp_targets[0])
+ pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
+ bond->dev->name);
}
if (bond->dev->flags & IFF_UP) {
/* If the interface is up, we may need to fire off
* timer will get fired off when the open function
* is called.
*/
- cancel_delayed_work_sync(&bond->mii_work);
- queue_delayed_work(bond->wq, &bond->arp_work, 0);
+ if (!new_value) {
+ cancel_delayed_work_sync(&bond->arp_work);
+ } else {
+ cancel_delayed_work_sync(&bond->mii_work);
+ queue_delayed_work(bond->wq, &bond->arp_work, 0);
+ }
}
-
out:
rtnl_unlock();
return ret;
}
if (new_value < 0) {
pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 1, INT_MAX);
+ bond->dev->name, new_value, 0, INT_MAX);
ret = -EINVAL;
goto out;
} else {
goto out;
}
if (new_value < 0) {
- pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 1, INT_MAX);
+ pr_err("%s: Invalid up delay value %d not in range %d-%d; rejected.\n",
+ bond->dev->name, new_value, 0, INT_MAX);
ret = -EINVAL;
goto out;
} else {
}
if (new_value < 0) {
pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 1, INT_MAX);
+ bond->dev->name, new_value, 0, INT_MAX);
ret = -EINVAL;
goto out;
- } else {
- pr_info("%s: Setting MII monitoring interval to %d.\n",
- bond->dev->name, new_value);
- bond->params.miimon = new_value;
- if (bond->params.updelay)
- pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.updelay * bond->params.miimon);
- if (bond->params.downdelay)
- pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.downdelay * bond->params.miimon);
- if (bond->params.arp_interval) {
- pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
- bond->dev->name);
- bond->params.arp_interval = 0;
- if (bond->params.arp_validate) {
- bond->params.arp_validate =
- BOND_ARP_VALIDATE_NONE;
- }
- }
-
- if (bond->dev->flags & IFF_UP) {
- /* If the interface is up, we may need to fire off
- * the MII timer. If the interface is down, the
- * timer will get fired off when the open function
- * is called.
- */
+ }
+ pr_info("%s: Setting MII monitoring interval to %d.\n",
+ bond->dev->name, new_value);
+ bond->params.miimon = new_value;
+ if (bond->params.updelay)
+ pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.updelay * bond->params.miimon);
+ if (bond->params.downdelay)
+ pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.downdelay * bond->params.miimon);
+ if (new_value && bond->params.arp_interval) {
+ pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
+ bond->dev->name);
+ bond->params.arp_interval = 0;
+ if (bond->params.arp_validate)
+ bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
+ }
+ if (bond->dev->flags & IFF_UP) {
+ /* If the interface is up, we may need to fire off
+ * the MII timer. If the interface is down, the
+ * timer will get fired off when the open function
+ * is called.
+ */
+ if (!new_value) {
+ cancel_delayed_work_sync(&bond->mii_work);
+ } else {
cancel_delayed_work_sync(&bond->arp_work);
queue_delayed_work(bond->wq, &bond->mii_work, 0);
}
config CAN_PEAK_PCMCIA
tristate "PEAK PCAN-PC Card"
depends on PCMCIA
+ depends on HAS_IOPORT
---help---
This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
from PEAK-System (http://www.peak-system.com). To compile this
*/
if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
REG_CR_BASICCAN_INITIAL &&
- (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
+ (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) &&
(priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
flag = 1;
* See states on p. 23 of the Datasheet.
*/
if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
- priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
+ priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL &&
priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
return flag;
*/
spin_lock_irqsave(&priv->cmdreg_lock, flags);
priv->write_reg(priv, REG_CMR, val);
- priv->read_reg(priv, REG_SR);
+ priv->read_reg(priv, SJA1000_REG_SR);
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
}
while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
n++;
- status = priv->read_reg(priv, REG_SR);
+ status = priv->read_reg(priv, SJA1000_REG_SR);
/* check for absent controller due to hw unplug */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
/* receive interrupt */
while (status & SR_RBS) {
sja1000_rx(dev);
- status = priv->read_reg(priv, REG_SR);
+ status = priv->read_reg(priv, SJA1000_REG_SR);
/* check for absent controller */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
#define REG_MOD 0x00
#define REG_CMR 0x01
-#define REG_SR 0x02
+#define SJA1000_REG_SR 0x02
#define REG_IR 0x03
#define REG_IER 0x04
#define REG_ALC 0x0B
/* how about 0x2000 */
#define MAX_TX_BUF_LEN 0x2000
#define MAX_TX_BUF_SHIFT 13
-/*#define MAX_TX_BUF_LEN 0x3000 */
+#define MAX_TSO_SEG_SIZE 0x3c00
/* rrs word 1 bit 0:31 */
#define RRS_RX_CSUM_MASK 0xFFFF
struct atl1e_hw hw;
struct atl1e_hw_stats hw_stats;
- bool have_msi;
u32 wol;
u16 link_speed;
u16 link_duplex;
struct net_device *netdev = adapter->netdev;
free_irq(adapter->pdev->irq, netdev);
-
- if (adapter->have_msi)
- pci_disable_msi(adapter->pdev);
}
static int atl1e_request_irq(struct atl1e_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
struct net_device *netdev = adapter->netdev;
- int flags = 0;
int err = 0;
- adapter->have_msi = true;
- err = pci_enable_msi(pdev);
- if (err) {
- netdev_dbg(netdev,
- "Unable to allocate MSI interrupt Error: %d\n", err);
- adapter->have_msi = false;
- }
-
- if (!adapter->have_msi)
- flags |= IRQF_SHARED;
- err = request_irq(pdev->irq, atl1e_intr, flags, netdev->name, netdev);
+ err = request_irq(pdev->irq, atl1e_intr, IRQF_SHARED, netdev->name,
+ netdev);
if (err) {
netdev_dbg(adapter->netdev,
"Unable to allocate interrupt Error: %d\n", err);
- if (adapter->have_msi)
- pci_disable_msi(pdev);
return err;
}
netdev_dbg(netdev, "atl1e_request_irq OK\n");
INIT_WORK(&adapter->reset_task, atl1e_reset_task);
INIT_WORK(&adapter->link_chg_task, atl1e_link_chg_task);
+ netif_set_gso_max_size(netdev, MAX_TSO_SEG_SIZE);
err = register_netdev(netdev);
if (err) {
netdev_err(netdev, "register netdevice failed\n");
bp->port.pmf = 0;
load_error1:
bnx2x_napi_disable(bp);
+ bnx2x_del_all_napi(bp);
/* clear pf_load status, as it was already set */
if (IS_PF(bp))
break;
default:
BNX2X_ERR("Non valid capability ID\n");
- rval = -EINVAL;
+ rval = 1;
break;
}
} else {
DP(BNX2X_MSG_DCB, "DCB disabled\n");
- rval = -EINVAL;
+ rval = 1;
}
DP(BNX2X_MSG_DCB, "capid %d:%x\n", capid, *cap);
break;
default:
BNX2X_ERR("Non valid TC-ID\n");
- rval = -EINVAL;
+ rval = 1;
break;
}
} else {
DP(BNX2X_MSG_DCB, "DCB disabled\n");
- rval = -EINVAL;
+ rval = 1;
}
return rval;
return -EINVAL;
}
-static u8 bnx2x_dcbnl_get_pfc_state(struct net_device *netdev)
+static u8 bnx2x_dcbnl_get_pfc_state(struct net_device *netdev)
{
struct bnx2x *bp = netdev_priv(netdev);
DP(BNX2X_MSG_DCB, "state = %d\n", bp->dcbx_local_feat.pfc.enabled);
break;
default:
BNX2X_ERR("Non valid featrue-ID\n");
- rval = -EINVAL;
+ rval = 1;
break;
}
} else {
DP(BNX2X_MSG_DCB, "DCB disabled\n");
- rval = -EINVAL;
+ rval = 1;
}
return rval;
break;
default:
BNX2X_ERR("Non valid featrue-ID\n");
- rval = -EINVAL;
+ rval = 1;
break;
}
} else {
DP(BNX2X_MSG_DCB, "dcbnl call not valid\n");
- rval = -EINVAL;
+ rval = 1;
}
return rval;
MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL5_MISC6,
&rx_tx_in_reset);
- if (!rx_tx_in_reset) {
+ if ((!rx_tx_in_reset) &&
+ (params->link_flags &
+ PHY_INITIALIZED)) {
bnx2x_warpcore_reset_lane(bp, phy, 1);
bnx2x_warpcore_config_sfi(phy, params);
bnx2x_warpcore_reset_lane(bp, phy, 0);
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->mac_type = MAC_TYPE_NONE;
vars->phy_flags = 0;
+ vars->check_kr2_recovery_cnt = 0;
+ params->link_flags = PHY_INITIALIZED;
/* Driver opens NIG-BRB filters */
bnx2x_set_rx_filter(params, 1);
/* Check if link flap can be avoided */
struct bnx2x *bp = params->bp;
vars->link_up = 0;
vars->phy_flags = 0;
+ params->link_flags &= ~PHY_INITIALIZED;
if (!params->lfa_base)
return bnx2x_link_reset(params, vars, 1);
/*
vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE;
bnx2x_update_link_attr(params, vars->link_attr_sync);
+ vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT;
/* Restart AN on leading lane */
bnx2x_warpcore_restart_AN_KR(phy, params);
}
return;
}
+ /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery
+ * since some switches tend to reinit the AN process and clear the
+ * advertised BP/NP after ~2 seconds causing the KR2 to be disabled
+ * and recovered many times
+ */
+ if (vars->check_kr2_recovery_cnt > 0) {
+ vars->check_kr2_recovery_cnt--;
+ return;
+ }
lane = bnx2x_get_warpcore_lane(phy, params);
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, lane);
req_flow_ctrl is set to AUTO */
u16 link_flags;
#define LINK_FLAGS_INT_DISABLED (1<<0)
+#define PHY_INITIALIZED (1<<1)
u32 lfa_base;
};
u32 link_status;
u32 eee_status;
u8 fault_detected;
- u8 rsrv1;
+ u8 check_kr2_recovery_cnt;
+#define CHECK_KR2_RECOVERY_CNT 5
u16 periodic_flags;
#define PERIODIC_FLAGS_LINK_EVENT 0x0001
#define UPDATE_QSTAT(s, t) \
do { \
- qstats->t##_hi = qstats_old->t##_hi + le32_to_cpu(s.hi); \
qstats->t##_lo = qstats_old->t##_lo + le32_to_cpu(s.lo); \
+ qstats->t##_hi = qstats_old->t##_hi + le32_to_cpu(s.hi) \
+ + ((qstats->t##_lo < qstats_old->t##_lo) ? 1 : 0); \
} while (0)
#define UPDATE_QSTAT_OLD(f) \
tg3_ump_link_report(tp);
}
+
+ tp->link_up = netif_carrier_ok(tp->dev);
}
static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl)
return err;
}
-static void tg3_carrier_on(struct tg3 *tp)
-{
- netif_carrier_on(tp->dev);
- tp->link_up = true;
-}
-
static void tg3_carrier_off(struct tg3 *tp)
{
netif_carrier_off(tp->dev);
return -EBUSY;
if (netif_running(tp->dev) && tp->link_up) {
- tg3_carrier_off(tp);
+ netif_carrier_off(tp->dev);
tg3_link_report(tp);
}
tp->link_config.active_speed = tp->link_config.speed;
tp->link_config.active_duplex = tp->link_config.duplex;
+ if (tg3_asic_rev(tp) == ASIC_REV_5714) {
+ /* With autoneg disabled, 5715 only links up when the
+ * advertisement register has the configured speed
+ * enabled.
+ */
+ tg3_writephy(tp, MII_ADVERTISE, ADVERTISE_ALL);
+ }
+
bmcr = 0;
switch (tp->link_config.speed) {
default:
{
if (curr_link_up != tp->link_up) {
if (curr_link_up) {
- tg3_carrier_on(tp);
+ netif_carrier_on(tp->dev);
} else {
- tg3_carrier_off(tp);
+ netif_carrier_off(tp->dev);
if (tp->phy_flags & TG3_PHYFLG_MII_SERDES)
tp->phy_flags &= ~TG3_PHYFLG_PARALLEL_DETECT;
}
if (j + len > block_end)
goto partno;
- memcpy(tp->fw_ver, &vpd_data[j], len);
- strncat(tp->fw_ver, " bc ", vpdlen - len - 1);
+ if (len >= sizeof(tp->fw_ver))
+ len = sizeof(tp->fw_ver) - 1;
+ memset(tp->fw_ver, 0, sizeof(tp->fw_ver));
+ snprintf(tp->fw_ver, sizeof(tp->fw_ver), "%.*s bc ", len,
+ &vpd_data[j]);
}
partno:
#define XGMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */
/* XGMAC_INT_STAT reg */
+#define XGMAC_INT_STAT_PMTIM 0x00800000 /* PMT Interrupt Mask */
#define XGMAC_INT_STAT_PMT 0x0080 /* PMT Interrupt Status */
#define XGMAC_INT_STAT_LPI 0x0040 /* LPI Interrupt Status */
writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_STATUS);
writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_INTR_ENA);
+ /* Mask power mgt interrupt */
+ writel(XGMAC_INT_STAT_PMTIM, ioaddr + XGMAC_INT_STAT);
+
/* XGMAC requires AXI bus init. This is a 'magic number' for now */
writel(0x0077000E, ioaddr + XGMAC_DMA_AXI_BUS);
struct sk_buff *skb;
int frame_len;
+ if (!dma_ring_cnt(priv->rx_head, priv->rx_tail, DMA_RX_RING_SZ))
+ break;
+
entry = priv->rx_tail;
p = priv->dma_rx + entry;
if (desc_get_owner(p))
unsigned int pmt = 0;
if (mode & WAKE_MAGIC)
- pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT;
+ pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT_EN;
if (mode & WAKE_UCAST)
pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_GLBL_UNICAST;
}
#define EEPROM_STAT_ADDR 0x7bfc
-#define VPD_BASE 0
#define VPD_LEN 512
+#define VPD_BASE 0x400
+#define VPD_BASE_OLD 0
/**
* t4_seeprom_wp - enable/disable EEPROM write protection
int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
{
u32 cclk_param, cclk_val;
- int i, ret;
+ int i, ret, addr;
int ec, sn;
u8 *vpd, csum;
unsigned int vpdr_len, kw_offset, id_len;
if (!vpd)
return -ENOMEM;
- ret = pci_read_vpd(adapter->pdev, VPD_BASE, VPD_LEN, vpd);
+ ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd);
+ if (ret < 0)
+ goto out;
+ addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD;
+
+ ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd);
if (ret < 0)
goto out;
tmp = readl(reg);
}
+/*
+ * Sleep, either by using msleep() or if we are suspending, then
+ * use mdelay() to sleep.
+ */
+static void dm9000_msleep(board_info_t *db, unsigned int ms)
+{
+ if (db->in_suspend)
+ mdelay(ms);
+ else
+ msleep(ms);
+}
+
+/* Read a word from phyxcer */
+static int
+dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
+{
+ board_info_t *db = netdev_priv(dev);
+ unsigned long flags;
+ unsigned int reg_save;
+ int ret;
+
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Issue phyxcer read command */
+ iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS);
+
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_msleep(db, 1); /* Wait read complete */
+
+ spin_lock_irqsave(&db->lock, flags);
+ reg_save = readb(db->io_addr);
+
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */
+
+ /* The read data keeps on REG_0D & REG_0E */
+ ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
+
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ mutex_unlock(&db->addr_lock);
+
+ dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
+ return ret;
+}
+
+/* Write a word to phyxcer */
+static void
+dm9000_phy_write(struct net_device *dev,
+ int phyaddr_unused, int reg, int value)
+{
+ board_info_t *db = netdev_priv(dev);
+ unsigned long flags;
+ unsigned long reg_save;
+
+ dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Fill the written data into REG_0D & REG_0E */
+ iow(db, DM9000_EPDRL, value);
+ iow(db, DM9000_EPDRH, value >> 8);
+
+ /* Issue phyxcer write command */
+ iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW);
+
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_msleep(db, 1); /* Wait write complete */
+
+ spin_lock_irqsave(&db->lock, flags);
+ reg_save = readb(db->io_addr);
+
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
+
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+ mutex_unlock(&db->addr_lock);
+}
+
/* dm9000_set_io
*
* select the specified set of io routines to use with the
iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
+ dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */
+ dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); /* Init */
+
ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0;
/* if wol is needed, then always set NCR_WAKEEN otherwise we end
return 0;
}
-/*
- * Sleep, either by using msleep() or if we are suspending, then
- * use mdelay() to sleep.
- */
-static void dm9000_msleep(board_info_t *db, unsigned int ms)
-{
- if (db->in_suspend)
- mdelay(ms);
- else
- msleep(ms);
-}
-
-/*
- * Read a word from phyxcer
- */
-static int
-dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
-{
- board_info_t *db = netdev_priv(dev);
- unsigned long flags;
- unsigned int reg_save;
- int ret;
-
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock,flags);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Fill the phyxcer register into REG_0C */
- iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
- iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); /* Issue phyxcer read command */
-
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
-
- dm9000_msleep(db, 1); /* Wait read complete */
-
- spin_lock_irqsave(&db->lock,flags);
- reg_save = readb(db->io_addr);
-
- iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */
-
- /* The read data keeps on REG_0D & REG_0E */
- ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
-
- /* restore the previous address */
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
-
- mutex_unlock(&db->addr_lock);
-
- dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
- return ret;
-}
-
-/*
- * Write a word to phyxcer
- */
-static void
-dm9000_phy_write(struct net_device *dev,
- int phyaddr_unused, int reg, int value)
-{
- board_info_t *db = netdev_priv(dev);
- unsigned long flags;
- unsigned long reg_save;
-
- dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock,flags);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Fill the phyxcer register into REG_0C */
- iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
- /* Fill the written data into REG_0D & REG_0E */
- iow(db, DM9000_EPDRL, value);
- iow(db, DM9000_EPDRH, value >> 8);
-
- iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); /* Issue phyxcer write command */
-
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock, flags);
-
- dm9000_msleep(db, 1); /* Wait write complete */
-
- spin_lock_irqsave(&db->lock,flags);
- reg_save = readb(db->io_addr);
-
- iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
-
- /* restore the previous address */
- writeb(reg_save, db->io_addr);
-
- spin_unlock_irqrestore(&db->lock, flags);
- mutex_unlock(&db->addr_lock);
-}
-
static void
dm9000_shutdown(struct net_device *dev)
{
db->flags |= DM9000_PLATF_SIMPLE_PHY;
#endif
- dm9000_reset(db);
+ /* Fixing bug on dm9000_probe, takeover dm9000_reset(db),
+ * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo
+ * while probe stage.
+ */
+
+ iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST);
/* try multiple times, DM9000 sometimes gets the read wrong */
for (i = 0; i < 8; i++) {
#define NCR_WAKEEN (1<<6)
#define NCR_FCOL (1<<4)
#define NCR_FDX (1<<3)
-#define NCR_LBK (3<<1)
+
+#define NCR_RESERVED (3<<1)
+#define NCR_MAC_LBK (1<<1)
#define NCR_RST (1<<0)
#define NSR_SPEED (1<<7)
#define ISR_LNKCHNG (1<<5)
#define ISR_UNDERRUN (1<<4)
+/* Davicom MII registers.
+ */
+
+#define MII_DM_DSPCR 0x1b /* DSP Control Register */
+
+#define DSPCR_INIT_PARAM 0xE100 /* DSP init parameter */
+
#endif /* _DM9000X_H_ */
config DE4X5
tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
depends on (PCI || EISA)
+ depends on VIRT_TO_BUS || ALPHA || PPC || SPARC
select CRC32
---help---
This is support for the DIGITAL series of PCI/EISA Ethernet cards.
struct pci_dev *pdev;
struct net_device *netdev;
+ u8 __iomem *csr; /* CSR BAR used only for BE2/3 */
u8 __iomem *db; /* Door Bell */
struct mutex mbox_lock; /* For serializing mbox cmds to BE card */
return 0;
}
-static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
+static u16 be_POST_stage_get(struct be_adapter *adapter)
{
u32 sem;
- u32 reg = skyhawk_chip(adapter) ? SLIPORT_SEMAPHORE_OFFSET_SH :
- SLIPORT_SEMAPHORE_OFFSET_BE;
- pci_read_config_dword(adapter->pdev, reg, &sem);
- *stage = sem & POST_STAGE_MASK;
-
- if ((sem >> POST_ERR_SHIFT) & POST_ERR_MASK)
- return -1;
+ if (BEx_chip(adapter))
+ sem = ioread32(adapter->csr + SLIPORT_SEMAPHORE_OFFSET_BEx);
else
- return 0;
+ pci_read_config_dword(adapter->pdev,
+ SLIPORT_SEMAPHORE_OFFSET_SH, &sem);
+
+ return sem & POST_STAGE_MASK;
}
int lancer_wait_ready(struct be_adapter *adapter)
}
do {
- status = be_POST_stage_get(adapter, &stage);
- if (status) {
- dev_err(dev, "POST error; stage=0x%x\n", stage);
- return -1;
- } else if (stage != POST_STAGE_ARMFW_RDY) {
- if (msleep_interruptible(2000)) {
- dev_err(dev, "Waiting for POST aborted\n");
- return -EINTR;
- }
- timeout += 2;
- } else {
+ stage = be_POST_stage_get(adapter);
+ if (stage == POST_STAGE_ARMFW_RDY)
return 0;
+
+ dev_info(dev, "Waiting for POST, %ds elapsed\n",
+ timeout);
+ if (msleep_interruptible(2000)) {
+ dev_err(dev, "Waiting for POST aborted\n");
+ return -EINTR;
}
+ timeout += 2;
} while (timeout < 60);
dev_err(dev, "POST timeout; stage=0x%x\n", stage);
#define MPU_EP_CONTROL 0
/********** MPU semphore: used for SH & BE *************/
-#define SLIPORT_SEMAPHORE_OFFSET_BE 0x7c
-#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94
+#define SLIPORT_SEMAPHORE_OFFSET_BEx 0xac /* CSR BAR offset */
+#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94 /* PCI-CFG offset */
#define POST_STAGE_MASK 0x0000FFFF
#define POST_ERR_MASK 0x1
#define POST_ERR_SHIFT 31
static void be_unmap_pci_bars(struct be_adapter *adapter)
{
+ if (adapter->csr)
+ pci_iounmap(adapter->pdev, adapter->csr);
if (adapter->db)
pci_iounmap(adapter->pdev, adapter->db);
}
adapter->if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >>
SLI_INTF_IF_TYPE_SHIFT;
+ if (BEx_chip(adapter) && be_physfn(adapter)) {
+ adapter->csr = pci_iomap(adapter->pdev, 2, 0);
+ if (adapter->csr == NULL)
+ return -ENOMEM;
+ }
+
addr = pci_iomap(adapter->pdev, db_bar(adapter), 0);
if (addr == NULL)
goto pci_map_err;
pci_restore_state(pdev);
/* Check if card is ok and fw is ready */
+ dev_info(&adapter->pdev->dev,
+ "Waiting for FW to be ready after EEH reset\n");
status = be_fw_wait_ready(adapter);
if (status)
return PCI_ERS_RESULT_DISCONNECT;
return NETDEV_TX_OK;
}
+/* Init RX & TX buffer descriptors
+ */
+static void fec_enet_bd_init(struct net_device *dev)
+{
+ struct fec_enet_private *fep = netdev_priv(dev);
+ struct bufdesc *bdp;
+ unsigned int i;
+
+ /* Initialize the receive buffer descriptors. */
+ bdp = fep->rx_bd_base;
+ for (i = 0; i < RX_RING_SIZE; i++) {
+
+ /* Initialize the BD for every fragment in the page. */
+ if (bdp->cbd_bufaddr)
+ bdp->cbd_sc = BD_ENET_RX_EMPTY;
+ else
+ bdp->cbd_sc = 0;
+ bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
+ }
+
+ /* Set the last buffer to wrap */
+ bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ fep->cur_rx = fep->rx_bd_base;
+
+ /* ...and the same for transmit */
+ bdp = fep->tx_bd_base;
+ fep->cur_tx = bdp;
+ for (i = 0; i < TX_RING_SIZE; i++) {
+
+ /* Initialize the BD for every fragment in the page. */
+ bdp->cbd_sc = 0;
+ if (bdp->cbd_bufaddr && fep->tx_skbuff[i]) {
+ dev_kfree_skb_any(fep->tx_skbuff[i]);
+ fep->tx_skbuff[i] = NULL;
+ }
+ bdp->cbd_bufaddr = 0;
+ bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
+ }
+
+ /* Set the last buffer to wrap */
+ bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
+ bdp->cbd_sc |= BD_SC_WRAP;
+ fep->dirty_tx = bdp;
+}
+
/* This function is called to start or restart the FEC during a link
* change. This only happens when switching between half and full
* duplex.
/* Set maximum receive buffer size. */
writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
+ fec_enet_bd_init(ndev);
+
/* Set receive and transmit descriptor base. */
writel(fep->bd_dma, fep->hwp + FEC_R_DES_START);
if (fep->bufdesc_ex)
writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc)
* RX_RING_SIZE, fep->hwp + FEC_X_DES_START);
- fep->cur_rx = fep->rx_bd_base;
for (i = 0; i <= TX_RING_MOD_MASK; i++) {
if (fep->tx_skbuff[i]) {
goto spin_unlock;
}
- /* Duplex link change */
if (phy_dev->link) {
- if (fep->full_duplex != phy_dev->duplex) {
- fec_restart(ndev, phy_dev->duplex);
- /* prevent unnecessary second fec_restart() below */
+ if (!fep->link) {
fep->link = phy_dev->link;
status_change = 1;
}
- }
- /* Link on or off change */
- if (phy_dev->link != fep->link) {
- fep->link = phy_dev->link;
- if (phy_dev->link)
+ if (fep->full_duplex != phy_dev->duplex)
+ status_change = 1;
+
+ if (phy_dev->speed != fep->speed) {
+ fep->speed = phy_dev->speed;
+ status_change = 1;
+ }
+
+ /* if any of the above changed restart the FEC */
+ if (status_change)
fec_restart(ndev, phy_dev->duplex);
- else
+ } else {
+ if (fep->link) {
fec_stop(ndev);
- status_change = 1;
+ status_change = 1;
+ }
}
spin_unlock:
static void fec_enet_free_buffers(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
- int i;
+ unsigned int i;
struct sk_buff *skb;
struct bufdesc *bdp;
static int fec_enet_alloc_buffers(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
- int i;
+ unsigned int i;
struct sk_buff *skb;
struct bufdesc *bdp;
struct fec_enet_private *fep = netdev_priv(ndev);
/* Don't know what to do yet. */
+ napi_disable(&fep->napi);
fep->opened = 0;
netif_stop_queue(ndev);
fec_stop(ndev);
{
struct fec_enet_private *fep = netdev_priv(ndev);
struct bufdesc *cbd_base;
- struct bufdesc *bdp;
- int i;
/* Allocate memory for buffer descriptors. */
cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma,
return -ENOMEM;
}
+ memset(cbd_base, 0, PAGE_SIZE);
spin_lock_init(&fep->hw_lock);
fep->netdev = ndev;
writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK);
netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT);
- /* Initialize the receive buffer descriptors. */
- bdp = fep->rx_bd_base;
- for (i = 0; i < RX_RING_SIZE; i++) {
-
- /* Initialize the BD for every fragment in the page. */
- bdp->cbd_sc = 0;
- bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
- }
-
- /* Set the last buffer to wrap */
- bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
- bdp->cbd_sc |= BD_SC_WRAP;
-
- /* ...and the same for transmit */
- bdp = fep->tx_bd_base;
- fep->cur_tx = bdp;
- for (i = 0; i < TX_RING_SIZE; i++) {
-
- /* Initialize the BD for every fragment in the page. */
- bdp->cbd_sc = 0;
- bdp->cbd_bufaddr = 0;
- bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
- }
-
- /* Set the last buffer to wrap */
- bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
- bdp->cbd_sc |= BD_SC_WRAP;
- fep->dirty_tx = bdp;
-
fec_restart(ndev, 0);
return 0;
phy_interface_t phy_interface;
int link;
int full_duplex;
+ int speed;
struct completion mdio_done;
int irq[FEC_IRQ_NUM];
int bufdesc_ex;
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
}
+EXPORT_SYMBOL(fec_ptp_start_cyclecounter);
/**
* fec_ptp_adjfreq - adjust ptp cycle frequency
return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
-EFAULT : 0;
}
+EXPORT_SYMBOL(fec_ptp_ioctl);
/**
* fec_time_keep - call timecounter_read every second to avoid timer overrun
pr_info("registered PHC device on %s\n", ndev->name);
}
}
+EXPORT_SYMBOL(fec_ptp_init);
txdr->buffer_info[i].dma =
dma_map_single(&pdev->dev, skb->data, skb->len,
DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, txdr->buffer_info[i].dma)) {
+ ret_val = 4;
+ goto err_nomem;
+ }
tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
tx_desc->lower.data = cpu_to_le32(skb->len);
tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
GFP_KERNEL);
if (!rxdr->buffer_info) {
- ret_val = 4;
+ ret_val = 5;
goto err_nomem;
}
rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
GFP_KERNEL);
if (!rxdr->desc) {
- ret_val = 5;
+ ret_val = 6;
goto err_nomem;
}
memset(rxdr->desc, 0, rxdr->size);
skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
if (!skb) {
- ret_val = 6;
+ ret_val = 7;
goto err_nomem;
}
skb_reserve(skb, NET_IP_ALIGN);
rxdr->buffer_info[i].dma =
dma_map_single(&pdev->dev, skb->data,
E1000_RXBUFFER_2048, DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, rxdr->buffer_info[i].dma)) {
+ ret_val = 8;
+ goto err_nomem;
+ }
rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
memset(skb->data, 0x00, skb->len);
}
#include <linux/delay.h>
#include <linux/vmalloc.h>
#include <linux/mdio.h>
+#include <linux/pm_runtime.h>
#include "e1000.h"
return 0;
}
+static int e1000e_ethtool_begin(struct net_device *netdev)
+{
+ return pm_runtime_get_sync(netdev->dev.parent);
+}
+
+static void e1000e_ethtool_complete(struct net_device *netdev)
+{
+ pm_runtime_put_sync(netdev->dev.parent);
+}
+
static const struct ethtool_ops e1000_ethtool_ops = {
+ .begin = e1000e_ethtool_begin,
+ .complete = e1000e_ethtool_complete,
.get_settings = e1000_get_settings,
.set_settings = e1000_set_settings,
.get_drvinfo = e1000_get_drvinfo,
return ret_val;
}
+/**
+ * e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP
+ * @hw: pointer to the HW structure
+ * @link: link up bool flag
+ *
+ * When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications
+ * preventing further DMA write requests. Workaround the issue by disabling
+ * the de-assertion of the clock request when in 1Gpbs mode.
+ **/
+static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link)
+{
+ u32 fextnvm6 = er32(FEXTNVM6);
+ s32 ret_val = 0;
+
+ if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) {
+ u16 kmrn_reg;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+ &kmrn_reg);
+ if (ret_val)
+ goto release;
+
+ ret_val =
+ e1000e_write_kmrn_reg_locked(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ kmrn_reg &
+ ~E1000_KMRNCTRLSTA_K1_ENABLE);
+ if (ret_val)
+ goto release;
+
+ usleep_range(10, 20);
+
+ ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK);
+
+ ret_val =
+ e1000e_write_kmrn_reg_locked(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ kmrn_reg);
+release:
+ hw->phy.ops.release(hw);
+ } else {
+ /* clear FEXTNVM6 bit 8 on link down or 10/100 */
+ ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
+ }
+
+ return ret_val;
+}
+
/**
* e1000_check_for_copper_link_ich8lan - Check for link (Copper)
* @hw: pointer to the HW structure
return ret_val;
}
+ /* Work-around I218 hang issue */
+ if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+ ret_val = e1000_k1_workaround_lpt_lp(hw, link);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Clear link partner's EEE ability */
hw->dev_spec.ich8lan.eee_lp_ability = 0;
phy_ctrl = er32(PHY_CTRL);
phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE;
+
if (hw->phy.type == e1000_phy_i217) {
- u16 phy_reg;
+ u16 phy_reg, device_id = hw->adapter->pdev->device;
+
+ if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
+ (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+ u32 fextnvm6 = er32(FEXTNVM6);
+
+ ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
+ }
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7
#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3
+#define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100
+
#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
#define E1000_ICH_RAR_ENTRIES 7
}
}
- if (!buffer_info->dma)
+ if (!buffer_info->dma) {
buffer_info->dma = dma_map_page(&pdev->dev,
buffer_info->page, 0,
PAGE_SIZE,
DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+ }
rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
netif_start_queue(netdev);
adapter->idle_check = true;
+ hw->mac.get_link_status = true;
pm_runtime_put(&pdev->dev);
/* fire a link status change interrupt to start the watchdog */
(adapter->hw.phy.media_type == e1000_media_type_copper)) {
int ret_val;
+ pm_runtime_get_sync(&adapter->pdev->dev);
ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
if (ret_val)
e_warn("Error reading PHY register\n");
+ pm_runtime_put_sync(&adapter->pdev->dev);
} else {
/* Do not read PHY registers if link is not up
* Set values to typical power-on defaults
return retval;
}
-static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
- bool runtime)
+static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
}
e1000e_reset_interrupt_capability(adapter);
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
-
status = er32(STATUS);
if (status & E1000_STATUS_LU)
wufc &= ~E1000_WUFC_LNKC;
ew32(WUFC, 0);
}
- *enable_wake = !!wufc;
-
- /* make sure adapter isn't asleep if manageability is enabled */
- if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
- (hw->mac.ops.check_mng_mode(hw)))
- *enable_wake = true;
-
if (adapter->hw.phy.type == e1000_phy_igp_3)
e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
*/
e1000e_release_hw_control(adapter);
- pci_disable_device(pdev);
-
- return 0;
-}
-
-static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
-{
- if (sleep && wake) {
- pci_prepare_to_sleep(pdev);
- return;
- }
-
- pci_wake_from_d3(pdev, wake);
- pci_set_power_state(pdev, PCI_D3hot);
-}
-
-static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
- bool wake)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
+ pci_clear_master(pdev);
/* The pci-e switch on some quad port adapters will report a
* correctable error when the MAC transitions from D0 to D3. To
pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL,
(devctl & ~PCI_EXP_DEVCTL_CERE));
- e1000_power_off(pdev, sleep, wake);
+ pci_save_state(pdev);
+ pci_prepare_to_sleep(pdev);
pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl);
- } else {
- e1000_power_off(pdev, sleep, wake);
}
+
+ return 0;
}
#ifdef CONFIG_PCIEASPM
if (aspm_disable_flag)
e1000e_disable_aspm(pdev, aspm_disable_flag);
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- pci_save_state(pdev);
+ pci_set_master(pdev);
e1000e_set_interrupt_capability(adapter);
if (netif_running(netdev)) {
static int e1000_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
- int retval;
- bool wake;
- retval = __e1000_shutdown(pdev, &wake, false);
- if (!retval)
- e1000_complete_shutdown(pdev, true, wake);
-
- return retval;
+ return __e1000_shutdown(pdev, false);
}
static int e1000_resume(struct device *dev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- if (e1000e_pm_ready(adapter)) {
- bool wake;
-
- __e1000_shutdown(pdev, &wake, true);
- }
+ if (!e1000e_pm_ready(adapter))
+ return 0;
- return 0;
+ return __e1000_shutdown(pdev, true);
}
static int e1000_idle(struct device *dev)
static void e1000_shutdown(struct pci_dev *pdev)
{
- bool wake = false;
-
- __e1000_shutdown(pdev, &wake, false);
-
- if (system_state == SYSTEM_POWER_OFF)
- e1000_complete_shutdown(pdev, false, wake);
+ __e1000_shutdown(pdev, false);
}
#ifdef CONFIG_NET_POLL_CONTROLLER
"Cannot re-enable PCI device after reset.\n");
result = PCI_ERS_RESULT_DISCONNECT;
} else {
- pci_set_master(pdev);
pdev->state_saved = true;
pci_restore_state(pdev);
+ pci_set_master(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
- device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ /* make sure adapter isn't asleep if manageability is enabled */
+ if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) ||
+ (hw->mac.ops.check_mng_mode(hw)))
+ device_wakeup_enable(&pdev->dev);
/* save off EEPROM version number */
e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
#define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */
#define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */
#define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */
+#define E1000_FEXTNVM6 0x00010 /* Future Extended NVM 6 - RW */
#define E1000_FEXTNVM7 0x000E4 /* Future Extended NVM 7 - RW */
#define E1000_FCT 0x00030 /* Flow Control Type - RW */
#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
switch (hw->phy.type) {
case e1000_phy_i210:
case e1000_phy_m88:
- if (hw->phy.id == I347AT4_E_PHY_ID ||
- hw->phy.id == M88E1112_E_PHY_ID)
+ switch (hw->phy.id) {
+ case I347AT4_E_PHY_ID:
+ case M88E1112_E_PHY_ID:
+ case I210_I_PHY_ID:
ret_val = igb_copper_link_setup_m88_gen2(hw);
- else
+ break;
+ default:
ret_val = igb_copper_link_setup_m88(hw);
+ break;
+ }
break;
case e1000_phy_igp_3:
ret_val = igb_copper_link_setup_igp(hw);
**/
void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
{
- u32 dtxswc;
+ u32 reg_val, reg_offset;
switch (hw->mac.type) {
case e1000_82576:
+ reg_offset = E1000_DTXSWC;
+ break;
case e1000_i350:
- dtxswc = rd32(E1000_DTXSWC);
- if (enable) {
- dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK |
- E1000_DTXSWC_VLAN_SPOOF_MASK);
- /* The PF can spoof - it has to in order to
- * support emulation mode NICs */
- dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
- } else {
- dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
- E1000_DTXSWC_VLAN_SPOOF_MASK);
- }
- wr32(E1000_DTXSWC, dtxswc);
+ reg_offset = E1000_TXSWC;
break;
default:
- break;
+ return;
+ }
+
+ reg_val = rd32(reg_offset);
+ if (enable) {
+ reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK |
+ E1000_DTXSWC_VLAN_SPOOF_MASK);
+ /* The PF can spoof - it has to in order to
+ * support emulation mode NICs
+ */
+ reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
+ } else {
+ reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
+ E1000_DTXSWC_VLAN_SPOOF_MASK);
}
+ wr32(reg_offset, reg_val);
}
/**
#endif
struct i2c_algo_bit_data i2c_algo;
struct i2c_adapter i2c_adap;
- struct igb_i2c_client_list *i2c_clients;
+ struct i2c_client *i2c_client;
};
#define IGB_FLAG_HAS_MSI (1 << 0)
#include <linux/pci.h>
#ifdef CONFIG_IGB_HWMON
+static struct i2c_board_info i350_sensor_info = {
+ I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)),
+};
+
/* hwmon callback functions */
static ssize_t igb_hwmon_show_location(struct device *dev,
struct device_attribute *attr,
unsigned int i;
int n_attrs;
int rc = 0;
+ struct i2c_client *client = NULL;
/* If this method isn't defined we don't support thermals */
if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL)
if (rc)
goto exit;
+ /* init i2c_client */
+ client = i2c_new_device(&adapter->i2c_adap, &i350_sensor_info);
+ if (client == NULL) {
+ dev_info(&adapter->pdev->dev,
+ "Failed to create new i2c device..\n");
+ goto exit;
+ }
+ adapter->i2c_client = client;
+
/* Allocation space for max attributes
* max num sensors * values (loc, temp, max, caution)
*/
return;
}
-static const struct i2c_board_info i350_sensor_info = {
- I2C_BOARD_INFO("i350bb", 0Xf8),
-};
-
/* igb_init_i2c - Init I2C interface
* @adapter: pointer to adapter structure
*
if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
return;
- igb_enable_sriov(pdev, max_vfs);
pci_sriov_set_totalvfs(pdev, 7);
+ igb_enable_sriov(pdev, max_vfs);
#endif /* CONFIG_PCI_IOV */
}
if (max_vfs > 7) {
dev_warn(&pdev->dev,
"Maximum of 7 VFs per PF, using max\n");
- adapter->vfs_allocated_count = 7;
+ max_vfs = adapter->vfs_allocated_count = 7;
} else
adapter->vfs_allocated_count = max_vfs;
if (adapter->vfs_allocated_count)
/* If we spanned a buffer we have a huge mess so test for it */
BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)));
- /* Guarantee this function can be used by verifying buffer sizes */
- BUILD_BUG_ON(SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) < (NET_SKB_PAD +
- NET_IP_ALIGN +
- IGB_TS_HDR_LEN +
- ETH_FRAME_LEN +
- ETH_FCS_LEN));
-
rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
page = rx_buffer->page;
prefetchw(page);
}
}
-static DEFINE_SPINLOCK(i2c_clients_lock);
-
-/* igb_get_i2c_client - returns matching client
- * in adapters's client list.
- * @adapter: adapter struct
- * @dev_addr: device address of i2c needed.
- */
-static struct i2c_client *
-igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr)
-{
- ulong flags;
- struct igb_i2c_client_list *client_list;
- struct i2c_client *client = NULL;
- struct i2c_board_info client_info = {
- I2C_BOARD_INFO("igb", 0x00),
- };
-
- spin_lock_irqsave(&i2c_clients_lock, flags);
- client_list = adapter->i2c_clients;
-
- /* See if we already have an i2c_client */
- while (client_list) {
- if (client_list->client->addr == (dev_addr >> 1)) {
- client = client_list->client;
- goto exit;
- } else {
- client_list = client_list->next;
- }
- }
-
- /* no client_list found, create a new one */
- client_list = kzalloc(sizeof(*client_list), GFP_ATOMIC);
- if (client_list == NULL)
- goto exit;
-
- /* dev_addr passed to us is left-shifted by 1 bit
- * i2c_new_device call expects it to be flush to the right.
- */
- client_info.addr = dev_addr >> 1;
- client_info.platform_data = adapter;
- client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info);
- if (client_list->client == NULL) {
- dev_info(&adapter->pdev->dev,
- "Failed to create new i2c device..\n");
- goto err_no_client;
- }
-
- /* insert new client at head of list */
- client_list->next = adapter->i2c_clients;
- adapter->i2c_clients = client_list;
-
- client = client_list->client;
- goto exit;
-
-err_no_client:
- kfree(client_list);
-exit:
- spin_unlock_irqrestore(&i2c_clients_lock, flags);
- return client;
-}
-
/* igb_read_i2c_byte - Reads 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to read
u8 dev_addr, u8 *data)
{
struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
- struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+ struct i2c_client *this_client = adapter->i2c_client;
s32 status;
u16 swfw_mask = 0;
u8 dev_addr, u8 data)
{
struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
- struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+ struct i2c_client *this_client = adapter->i2c_client;
s32 status;
u16 swfw_mask = E1000_SWFW_PHY0_SM;
case e1000_82576:
snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
adapter->ptp_caps.owner = THIS_MODULE;
- adapter->ptp_caps.max_adj = 1000000000;
+ adapter->ptp_caps.max_adj = 999999881;
adapter->ptp_caps.n_ext_ts = 0;
adapter->ptp_caps.pps = 0;
adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82576;
skb->data,
adapter->rx_buffer_len,
DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
rx_desc = IXGB_RX_DESC(*rx_ring, i);
rx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
rx_desc->status = 0;
- if (++i == rx_ring->count) i = 0;
+ if (++i == rx_ring->count)
+ i = 0;
buffer_info = &rx_ring->buffer_info[i];
}
ixgbe_dbg_init();
#endif /* CONFIG_DEBUG_FS */
+ ret = pci_register_driver(&ixgbe_driver);
+ if (ret) {
+#ifdef CONFIG_DEBUG_FS
+ ixgbe_dbg_exit();
+#endif /* CONFIG_DEBUG_FS */
+ return ret;
+ }
+
#ifdef CONFIG_IXGBE_DCA
dca_register_notify(&dca_notifier);
#endif
- ret = pci_register_driver(&ixgbe_driver);
- return ret;
+ return 0;
}
module_init(ixgbe_init_module);
free_irq(adapter->msix_entries[vector].vector,
adapter->q_vector[vector]);
}
- pci_disable_msix(adapter->pdev);
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
+ /* This failure is non-recoverable - it indicates the system is
+ * out of MSIX vector resources and the VF driver cannot run
+ * without them. Set the number of msix vectors to zero
+ * indicating that not enough can be allocated. The error
+ * will be returned to the user indicating device open failed.
+ * Any further attempts to force the driver to open will also
+ * fail. The only way to recover is to unload the driver and
+ * reload it again. If the system has recovered some MSIX
+ * vectors then it may succeed.
+ */
+ adapter->num_msix_vectors = 0;
return err;
}
struct ixgbe_hw *hw = &adapter->hw;
int err;
+ /* A previous failure to open the device because of a lack of
+ * available MSIX vector resources may have reset the number
+ * of msix vectors variable to zero. The only way to recover
+ * is to unload/reload the driver and hope that the system has
+ * been able to recover some MSIX vector resources.
+ */
+ if (!adapter->num_msix_vectors)
+ return -ENOMEM;
+
/* disallow open during test */
if (test_bit(__IXGBEVF_TESTING, &adapter->state))
return -EBUSY;
err_req_irq:
ixgbevf_down(adapter);
- ixgbevf_free_irq(adapter);
err_setup_rx:
ixgbevf_free_all_rx_resources(adapter);
err_setup_tx:
return 0;
err_free:
- kfree(dev);
+ free_netdev(dev);
err_out:
return err;
}
/* mii management interface *************************************************/
+static void mv643xx_adjust_pscr(struct mv643xx_eth_private *mp)
+{
+ u32 pscr = rdlp(mp, PORT_SERIAL_CONTROL);
+ u32 autoneg_disable = FORCE_LINK_PASS |
+ DISABLE_AUTO_NEG_SPEED_GMII |
+ DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
+ DISABLE_AUTO_NEG_FOR_DUPLEX;
+
+ if (mp->phy->autoneg == AUTONEG_ENABLE) {
+ /* enable auto negotiation */
+ pscr &= ~autoneg_disable;
+ goto out_write;
+ }
+
+ pscr |= autoneg_disable;
+
+ if (mp->phy->speed == SPEED_1000) {
+ /* force gigabit, half duplex not supported */
+ pscr |= SET_GMII_SPEED_TO_1000;
+ pscr |= SET_FULL_DUPLEX_MODE;
+ goto out_write;
+ }
+
+ pscr &= ~SET_GMII_SPEED_TO_1000;
+
+ if (mp->phy->speed == SPEED_100)
+ pscr |= SET_MII_SPEED_TO_100;
+ else
+ pscr &= ~SET_MII_SPEED_TO_100;
+
+ if (mp->phy->duplex == DUPLEX_FULL)
+ pscr |= SET_FULL_DUPLEX_MODE;
+ else
+ pscr &= ~SET_FULL_DUPLEX_MODE;
+
+out_write:
+ wrlp(mp, PORT_SERIAL_CONTROL, pscr);
+}
+
static irqreturn_t mv643xx_eth_err_irq(int irq, void *dev_id)
{
struct mv643xx_eth_shared_private *msp = dev_id;
mv643xx_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct mv643xx_eth_private *mp = netdev_priv(dev);
+ int ret;
if (mp->phy == NULL)
return -EINVAL;
*/
cmd->advertising &= ~ADVERTISED_1000baseT_Half;
- return phy_ethtool_sset(mp->phy, cmd);
+ ret = phy_ethtool_sset(mp->phy, cmd);
+ if (!ret)
+ mv643xx_adjust_pscr(mp);
+ return ret;
}
static void mv643xx_eth_get_drvinfo(struct net_device *dev,
static int mv643xx_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mv643xx_eth_private *mp = netdev_priv(dev);
+ int ret;
- if (mp->phy != NULL)
- return phy_mii_ioctl(mp->phy, ifr, cmd);
+ if (mp->phy == NULL)
+ return -ENOTSUPP;
- return -EOPNOTSUPP;
+ ret = phy_mii_ioctl(mp->phy, ifr, cmd);
+ if (!ret)
+ mv643xx_adjust_pscr(mp);
+ return ret;
}
static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu)
sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
- tp = space - 2048/8;
+ tp = space - 8192/8;
sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
} else {
GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */
GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */
-#define GMAC_DEF_MSK GM_IS_TX_FF_UR
+#define GMAC_DEF_MSK (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR)
};
/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */
static void mlx4_cq_free_icm(struct mlx4_dev *dev, int cqn)
{
- u64 in_param;
+ u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
static void mlx4_en_u64_to_mac(unsigned char dst_mac[ETH_ALEN + 2], u64 src_mac)
{
- unsigned int i;
- for (i = ETH_ALEN - 1; i; --i) {
+ int i;
+ for (i = ETH_ALEN - 1; i >= 0; --i) {
dst_mac[i] = src_mac & 0xff;
src_mac >>= 8;
}
struct mlx4_en_dev *mdev = priv->mdev;
struct mlx4_dev *dev = mdev->dev;
int qpn = priv->base_qpn;
- u64 mac = mlx4_en_mac_to_u64(priv->dev->dev_addr);
-
- en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
- priv->dev->dev_addr);
- mlx4_unregister_mac(dev, priv->port, mac);
+ u64 mac;
- if (dev->caps.steering_mode != MLX4_STEERING_MODE_A0) {
+ if (dev->caps.steering_mode == MLX4_STEERING_MODE_A0) {
+ mac = mlx4_en_mac_to_u64(priv->dev->dev_addr);
+ en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
+ priv->dev->dev_addr);
+ mlx4_unregister_mac(dev, priv->port, mac);
+ } else {
struct mlx4_mac_entry *entry;
struct hlist_node *tmp;
struct hlist_head *bucket;
- unsigned int mac_hash;
+ unsigned int i;
- mac_hash = priv->dev->dev_addr[MLX4_EN_MAC_HASH_IDX];
- bucket = &priv->mac_hash[mac_hash];
- hlist_for_each_entry_safe(entry, tmp, bucket, hlist) {
- if (ether_addr_equal_64bits(entry->mac,
- priv->dev->dev_addr)) {
- en_dbg(DRV, priv, "Releasing qp: port %d, MAC %pM, qpn %d\n",
- priv->port, priv->dev->dev_addr, qpn);
+ for (i = 0; i < MLX4_EN_MAC_HASH_SIZE; ++i) {
+ bucket = &priv->mac_hash[i];
+ hlist_for_each_entry_safe(entry, tmp, bucket, hlist) {
+ mac = mlx4_en_mac_to_u64(entry->mac);
+ en_dbg(DRV, priv, "Registering MAC: %pM for deleting\n",
+ entry->mac);
mlx4_en_uc_steer_release(priv, entry->mac,
qpn, entry->reg_id);
- mlx4_qp_release_range(dev, qpn, 1);
+ mlx4_unregister_mac(dev, priv->port, mac);
hlist_del_rcu(&entry->hlist);
kfree_rcu(entry, rcu);
- break;
}
}
+
+ en_dbg(DRV, priv, "Releasing qp: port %d, qpn %d\n",
+ priv->port, qpn);
+ mlx4_qp_release_range(dev, qpn, 1);
+ priv->flags &= ~MLX4_EN_FLAG_FORCE_PROMISC;
}
}
return mac;
}
-static int mlx4_en_set_mac(struct net_device *dev, void *addr)
+static int mlx4_en_do_set_mac(struct mlx4_en_priv *priv)
{
- struct mlx4_en_priv *priv = netdev_priv(dev);
- struct mlx4_en_dev *mdev = priv->mdev;
- struct sockaddr *saddr = addr;
-
- if (!is_valid_ether_addr(saddr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN);
- queue_work(mdev->workqueue, &priv->mac_task);
- return 0;
-}
-
-static void mlx4_en_do_set_mac(struct work_struct *work)
-{
- struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
- mac_task);
- struct mlx4_en_dev *mdev = priv->mdev;
int err = 0;
- mutex_lock(&mdev->state_lock);
if (priv->port_up) {
/* Remove old MAC and insert the new one */
err = mlx4_en_replace_mac(priv, priv->base_qpn,
} else
en_dbg(HW, priv, "Port is down while registering mac, exiting...\n");
+ return err;
+}
+
+static int mlx4_en_set_mac(struct net_device *dev, void *addr)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct mlx4_en_dev *mdev = priv->mdev;
+ struct sockaddr *saddr = addr;
+ int err;
+
+ if (!is_valid_ether_addr(saddr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN);
+
+ mutex_lock(&mdev->state_lock);
+ err = mlx4_en_do_set_mac(priv);
mutex_unlock(&mdev->state_lock);
+
+ return err;
}
static void mlx4_en_clear_list(struct net_device *dev)
queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY);
}
if (mdev->mac_removed[MLX4_MAX_PORTS + 1 - priv->port]) {
- queue_work(mdev->workqueue, &priv->mac_task);
+ mlx4_en_do_set_mac(priv);
mdev->mac_removed[MLX4_MAX_PORTS + 1 - priv->port] = 0;
}
mutex_unlock(&mdev->state_lock);
/* Flush multicast filter */
mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, 1, MLX4_MCAST_CONFIG);
+ /* Remove flow steering rules for the port*/
+ if (mdev->dev->caps.steering_mode ==
+ MLX4_STEERING_MODE_DEVICE_MANAGED) {
+ ASSERT_RTNL();
+ list_for_each_entry_safe(flow, tmp_flow,
+ &priv->ethtool_list, list) {
+ mlx4_flow_detach(mdev->dev, flow->id);
+ list_del(&flow->list);
+ }
+ }
+
mlx4_en_destroy_drop_qp(priv);
/* Free TX Rings */
if (!(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN))
mdev->mac_removed[priv->port] = 1;
- /* Remove flow steering rules for the port*/
- if (mdev->dev->caps.steering_mode ==
- MLX4_STEERING_MODE_DEVICE_MANAGED) {
- ASSERT_RTNL();
- list_for_each_entry_safe(flow, tmp_flow,
- &priv->ethtool_list, list) {
- mlx4_flow_detach(mdev->dev, flow->id);
- list_del(&flow->list);
- }
- }
-
/* Free RX Rings */
for (i = 0; i < priv->rx_ring_num; i++) {
mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]);
}
#ifdef CONFIG_RFS_ACCEL
- priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool);
- if (!priv->dev->rx_cpu_rmap)
- goto err;
+ if (priv->mdev->dev->caps.comp_pool) {
+ priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool);
+ if (!priv->dev->rx_cpu_rmap)
+ goto err;
+ }
#endif
return 0;
priv->msg_enable = MLX4_EN_MSG_LEVEL;
spin_lock_init(&priv->stats_lock);
INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode);
- INIT_WORK(&priv->mac_task, mlx4_en_do_set_mac);
INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
struct mlx4_slave_event_eq_info *event_eq =
priv->mfunc.master.slave_state[slave].event_eq;
u32 in_modifier = vhcr->in_modifier;
- u32 eqn = in_modifier & 0x1FF;
+ u32 eqn = in_modifier & 0x3FF;
u64 in_param = vhcr->in_param;
int err = 0;
int i;
bmme_flags &= ~MLX4_BMME_FLAG_TYPE_2_WIN;
MLX4_PUT(outbox->buf, bmme_flags, QUERY_DEV_CAP_BMME_FLAGS_OFFSET);
+ /* turn off device-managed steering capability if not enabled */
+ if (dev->caps.steering_mode != MLX4_STEERING_MODE_DEVICE_MANAGED) {
+ MLX4_GET(field, outbox->buf,
+ QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET);
+ field &= 0x7f;
+ MLX4_PUT(outbox->buf, field,
+ QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET);
+ }
return 0;
}
void mlx4_counter_free(struct mlx4_dev *dev, u32 idx)
{
- u64 in_param;
+ u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, idx);
static inline void set_param_l(u64 *arg, u32 val)
{
- *((u32 *)arg) = val;
+ *arg = (*arg & 0xffffffff00000000ULL) | (u64) val;
}
static inline void set_param_h(u64 *arg, u32 val)
struct mlx4_en_cq rx_cq[MAX_RX_RINGS];
struct mlx4_qp drop_qp;
struct work_struct rx_mode_task;
- struct work_struct mac_task;
struct work_struct watchdog_task;
struct work_struct linkstate_task;
struct delayed_work stats_task;
static u32 mlx4_alloc_mtt_range(struct mlx4_dev *dev, int order)
{
- u64 in_param;
+ u64 in_param = 0;
u64 out_param;
int err;
static void mlx4_free_mtt_range(struct mlx4_dev *dev, u32 offset, int order)
{
- u64 in_param;
+ u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
static void mlx4_mpt_release(struct mlx4_dev *dev, u32 index)
{
- u64 in_param;
+ u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, index);
static int mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index)
{
- u64 param;
+ u64 param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(¶m, index);
static void mlx4_mpt_free_icm(struct mlx4_dev *dev, u32 index)
{
- u64 in_param;
+ u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, index);
void mlx4_xrcd_free(struct mlx4_dev *dev, u32 xrcdn)
{
- u64 in_param;
+ u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac)
{
- u64 out_param;
+ u64 out_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, u64 mac)
{
- u64 out_param;
+ u64 out_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&out_param, port);
int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index)
{
- u64 out_param;
+ u64 out_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index)
{
- u64 in_param;
+ u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
int mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int *base)
{
- u64 in_param;
+ u64 in_param = 0;
u64 out_param;
int err;
void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt)
{
- u64 in_param;
+ u64 in_param = 0;
int err;
if (mlx4_is_mfunc(dev)) {
static int mlx4_qp_alloc_icm(struct mlx4_dev *dev, int qpn)
{
- u64 param;
+ u64 param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(¶m, qpn);
static void mlx4_qp_free_icm(struct mlx4_dev *dev, int qpn)
{
- u64 in_param;
+ u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, qpn);
struct list_head mcg_list;
spinlock_t mcg_spl;
int local_qpn;
+ atomic_t ref_count;
};
enum res_mtt_states {
struct res_fs_rule {
struct res_common com;
+ int qpn;
};
static void *res_tracker_lookup(struct rb_root *root, u64 res_id)
return dev->caps.num_mpts - 1;
}
-static void *find_res(struct mlx4_dev *dev, int res_id,
+static void *find_res(struct mlx4_dev *dev, u64 res_id,
enum mlx4_resource type)
{
struct mlx4_priv *priv = mlx4_priv(dev);
ret->local_qpn = id;
INIT_LIST_HEAD(&ret->mcg_list);
spin_lock_init(&ret->mcg_spl);
+ atomic_set(&ret->ref_count, 0);
return &ret->com;
}
return &ret->com;
}
-static struct res_common *alloc_fs_rule_tr(u64 id)
+static struct res_common *alloc_fs_rule_tr(u64 id, int qpn)
{
struct res_fs_rule *ret;
ret->com.res_id = id;
ret->com.state = RES_FS_RULE_ALLOCATED;
-
+ ret->qpn = qpn;
return &ret->com;
}
ret = alloc_xrcdn_tr(id);
break;
case RES_FS_RULE:
- ret = alloc_fs_rule_tr(id);
+ ret = alloc_fs_rule_tr(id, extra);
break;
default:
return NULL;
static int remove_qp_ok(struct res_qp *res)
{
- if (res->com.state == RES_QP_BUSY)
+ if (res->com.state == RES_QP_BUSY || atomic_read(&res->ref_count) ||
+ !list_empty(&res->mcg_list)) {
+ pr_err("resource tracker: fail to remove qp, state %d, ref_count %d\n",
+ res->com.state, atomic_read(&res->ref_count));
return -EBUSY;
- else if (res->com.state != RES_QP_RESERVED)
+ } else if (res->com.state != RES_QP_RESERVED) {
return -EPERM;
+ }
return 0;
}
u8 steer_type_mask = 2;
enum mlx4_steer_type type = (gid[7] & steer_type_mask) >> 1;
+ if (dev->caps.steering_mode != MLX4_STEERING_MODE_B0)
+ return -EINVAL;
+
qpn = vhcr->in_modifier & 0xffffff;
err = get_res(dev, slave, qpn, RES_QP, &rqp);
if (err)
struct list_head *rlist = &tracker->slave_list[slave].res_list[RES_MAC];
int err;
int qpn;
+ struct res_qp *rqp;
struct mlx4_net_trans_rule_hw_ctrl *ctrl;
struct _rule_hw *rule_header;
int header_id;
ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf;
qpn = be32_to_cpu(ctrl->qpn) & 0xffffff;
- err = get_res(dev, slave, qpn, RES_QP, NULL);
+ err = get_res(dev, slave, qpn, RES_QP, &rqp);
if (err) {
pr_err("Steering rule with qpn 0x%x rejected.\n", qpn);
return err;
if (err)
goto err_put;
- err = add_res_range(dev, slave, vhcr->out_param, 1, RES_FS_RULE, 0);
+ err = add_res_range(dev, slave, vhcr->out_param, 1, RES_FS_RULE, qpn);
if (err) {
mlx4_err(dev, "Fail to add flow steering resources.\n ");
/* detach rule*/
mlx4_cmd(dev, vhcr->out_param, 0, 0,
MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_NATIVE);
+ goto err_put;
}
+ atomic_inc(&rqp->ref_count);
err_put:
put_res(dev, slave, qpn, RES_QP);
return err;
struct mlx4_cmd_info *cmd)
{
int err;
+ struct res_qp *rqp;
+ struct res_fs_rule *rrule;
if (dev->caps.steering_mode !=
MLX4_STEERING_MODE_DEVICE_MANAGED)
return -EOPNOTSUPP;
+ err = get_res(dev, slave, vhcr->in_param, RES_FS_RULE, &rrule);
+ if (err)
+ return err;
+ /* Release the rule form busy state before removal */
+ put_res(dev, slave, vhcr->in_param, RES_FS_RULE);
+ err = get_res(dev, slave, rrule->qpn, RES_QP, &rqp);
+ if (err)
+ return err;
+
err = rem_res_range(dev, slave, vhcr->in_param, 1, RES_FS_RULE, 0);
if (err) {
mlx4_err(dev, "Fail to remove flow steering resources.\n ");
- return err;
+ goto out;
}
err = mlx4_cmd(dev, vhcr->in_param, 0, 0,
MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_NATIVE);
+ if (!err)
+ atomic_dec(&rqp->ref_count);
+out:
+ put_res(dev, slave, rrule->qpn, RES_QP);
return err;
}
mutex_lock(&priv->mfunc.master.res_tracker.slave_list[slave].mutex);
/*VLAN*/
rem_slave_macs(dev, slave);
+ rem_slave_fs_rule(dev, slave);
rem_slave_qps(dev, slave);
rem_slave_srqs(dev, slave);
rem_slave_cqs(dev, slave);
rem_slave_mtts(dev, slave);
rem_slave_counters(dev, slave);
rem_slave_xrcdns(dev, slave);
- rem_slave_fs_rule(dev, slave);
mutex_unlock(&priv->mfunc.master.res_tracker.slave_list[slave].mutex);
}
static void mlx4_srq_free_icm(struct mlx4_dev *dev, int srqn)
{
- u64 in_param;
+ u64 in_param = 0;
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, srqn);
for (; rxfc != 0; rxfc--) {
rxh = ks8851_rdreg32(ks, KS_RXFHSR);
rxstat = rxh & 0xffff;
- rxlen = rxh >> 16;
+ rxlen = (rxh >> 16) & 0xfff;
netif_dbg(ks, rx_status, ks->netdev,
"rx: stat 0x%04x, len 0x%04x\n", rxstat, rxlen);
}
platform_set_drvdata(pdev, ndev);
- if (lpc_mii_init(pldat) != 0)
+ ret = lpc_mii_init(pldat);
+ if (ret)
goto err_out_unregister_netdev;
netdev_info(ndev, "LPC mac at 0x%08x irq %d\n",
skb->protocol = eth_type_trans(skb, netdev);
if (tcp_ip_status & PCH_GBE_RXD_ACC_STAT_TCPIPOK)
- skb->ip_summed = CHECKSUM_NONE;
- else
skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
napi_gro_receive(&adapter->napi, skb);
(*work_done)++;
}
}
+static void rtl_speed_down(struct rtl8169_private *tp)
+{
+ u32 adv;
+ int lpa;
+
+ rtl_writephy(tp, 0x1f, 0x0000);
+ lpa = rtl_readphy(tp, MII_LPA);
+
+ if (lpa & (LPA_10HALF | LPA_10FULL))
+ adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full;
+ else if (lpa & (LPA_100HALF | LPA_100FULL))
+ adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
+ else
+ adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
+ (tp->mii.supports_gmii ?
+ ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full : 0);
+
+ rtl8169_set_speed(tp->dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL,
+ adv);
+}
+
static void rtl_wol_suspend_quirk(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
if (!(__rtl8169_get_wol(tp) & WAKE_ANY))
return false;
- rtl_writephy(tp, 0x1f, 0x0000);
- rtl_writephy(tp, MII_BMCR, 0x0000);
-
+ rtl_speed_down(tp);
rtl_wol_suspend_quirk(tp);
return true;
if (felic_stat & ECSR_LCHNG) {
/* Link Changed */
if (mdp->cd->no_psr || mdp->no_ether_link) {
- if (mdp->link == PHY_DOWN)
- link_stat = 0;
- else
- link_stat = PHY_ST_LINK;
+ goto ignore_link;
} else {
link_stat = (sh_eth_read(ndev, PSR));
if (mdp->ether_link_active_low)
}
}
+ignore_link:
if (intr_status & EESR_TWB) {
/* Write buck end. unused write back interrupt */
if (intr_status & EESR_TABT) /* Transmit Abort int */
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_cpu_data *cd = mdp->cd;
irqreturn_t ret = IRQ_NONE;
- u32 intr_status = 0;
+ unsigned long intr_status;
spin_lock(&mdp->lock);
- /* Get interrpt stat */
+ /* Get interrupt status */
intr_status = sh_eth_read(ndev, EESR);
+ /* Mask it with the interrupt mask, forcing ECI interrupt to be always
+ * enabled since it's the one that comes thru regardless of the mask,
+ * and we need to fully handle it in sh_eth_error() in order to quench
+ * it as it doesn't get cleared by just writing 1 to the ECI bit...
+ */
+ intr_status &= sh_eth_read(ndev, EESIPR) | DMAC_M_ECI;
/* Clear interrupt */
if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
struct phy_device *phydev = mdp->phydev;
int new_state = 0;
- if (phydev->link != PHY_DOWN) {
+ if (phydev->link) {
if (phydev->duplex != mdp->duplex) {
new_state = 1;
mdp->duplex = phydev->duplex;
if (mdp->cd->set_rate)
mdp->cd->set_rate(ndev);
}
- if (mdp->link == PHY_DOWN) {
+ if (!mdp->link) {
sh_eth_write(ndev,
(sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR);
new_state = 1;
mdp->link = phydev->link;
+ if (mdp->cd->no_psr || mdp->no_ether_link)
+ sh_eth_rcv_snd_enable(ndev);
}
} else if (mdp->link) {
new_state = 1;
- mdp->link = PHY_DOWN;
+ mdp->link = 0;
mdp->speed = 0;
mdp->duplex = -1;
+ if (mdp->cd->no_psr || mdp->no_ether_link)
+ sh_eth_rcv_snd_disable(ndev);
}
if (new_state && netif_msg_link(mdp))
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
mdp->mii_bus->id , mdp->phy_id);
- mdp->link = PHY_DOWN;
+ mdp->link = 0;
mdp->speed = 0;
mdp->duplex = -1;
/* MDIO bus release function */
static int sh_mdio_release(struct net_device *ndev)
{
+ struct sh_eth_private *mdp = netdev_priv(ndev);
struct mii_bus *bus = dev_get_drvdata(&ndev->dev);
/* unregister mdio bus */
/* free bitbang info */
free_mdio_bitbang(bus);
+ /* free bitbang memory */
+ kfree(mdp->bitbang);
+
return 0;
}
bitbang->ctrl.ops = &bb_ops;
/* MII controller setting */
+ mdp->bitbang = bitbang;
mdp->mii_bus = alloc_mdio_bitbang(&bitbang->ctrl);
if (!mdp->mii_bus) {
ret = -ENOMEM;
}
mdp->tsu_addr = ioremap(rtsu->start,
resource_size(rtsu));
+ if (mdp->tsu_addr == NULL) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "TSU ioremap failed.\n");
+ goto out_release;
+ }
mdp->port = devno % 2;
ndev->features = NETIF_F_HW_VLAN_FILTER;
}
const u16 *reg_offset;
void __iomem *addr;
void __iomem *tsu_addr;
+ struct bb_info *bitbang;
u32 num_rx_ring;
u32 num_tx_ring;
dma_addr_t rx_desc_dma;
u32 phy_id; /* PHY ID */
struct mii_bus *mii_bus; /* MDIO bus control */
struct phy_device *phydev; /* PHY device control */
- enum phy_state link;
+ int link;
phy_interface_t phy_interface;
int msg_enable;
int speed;
* TX scheduler is stopped when we're done and before
* netif_device_present() becomes false.
*/
- netif_tx_lock(dev);
+ netif_tx_lock_bh(dev);
netif_device_detach(dev);
- netif_tx_unlock(dev);
+ netif_tx_unlock_bh(dev);
}
#endif /* EFX_EFX_H */
return false;
tx_queue->empty_read_count = 0;
- return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0;
+ return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0
+ && tx_queue->write_count - write_count == 1;
}
/* For each entry inserted into the software descriptor ring, create a
rx_buf = efx_rx_buffer(rx_queue, index);
rx_buf->dma_addr = dma_addr + EFX_PAGE_IP_ALIGN;
rx_buf->u.page = page;
- rx_buf->page_offset = page_offset;
+ rx_buf->page_offset = page_offset + EFX_PAGE_IP_ALIGN;
rx_buf->len = efx->rx_buffer_len - EFX_PAGE_IP_ALIGN;
rx_buf->flags = EFX_RX_BUF_PAGE;
++rx_queue->added_count;
* queue is stopped then start the queue as we have free desc for tx
*/
if (unlikely(netif_queue_stopped(ndev)))
- netif_start_queue(ndev);
+ netif_wake_queue(ndev);
cpts_tx_timestamp(priv->cpts, skb);
priv->stats.tx_packets++;
priv->stats.tx_bytes += len;
/* If there is no more tx desc left free then we need to
* tell the kernel to stop sending us tx frames.
*/
- if (unlikely(cpdma_check_free_tx_desc(priv->txch)))
+ if (unlikely(!cpdma_check_free_tx_desc(priv->txch)))
netif_stop_queue(ndev);
return NETDEV_TX_OK;
struct platform_device *mdio;
parp = of_get_property(slave_node, "phy_id", &lenp);
- if ((parp == NULL) && (lenp != (sizeof(void *) * 2))) {
+ if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) {
pr_err("Missing slave[%d] phy_id property\n", i);
ret = -EINVAL;
goto error_ret;
* queue is stopped then start the queue as we have free desc for tx
*/
if (unlikely(netif_queue_stopped(ndev)))
- netif_start_queue(ndev);
+ netif_wake_queue(ndev);
ndev->stats.tx_packets++;
ndev->stats.tx_bytes += len;
dev_kfree_skb_any(skb);
/* If there is no more tx desc left free then we need to
* tell the kernel to stop sending us tx frames.
*/
- if (unlikely(cpdma_check_free_tx_desc(priv->txchan)))
+ if (unlikely(!cpdma_check_free_tx_desc(priv->txchan)))
netif_stop_queue(ndev);
return NETDEV_TX_OK;
return 0;
out:
+ if (rrpriv->evt_ring)
+ pci_free_consistent(pdev, EVT_RING_SIZE, rrpriv->evt_ring,
+ rrpriv->evt_ring_dma);
if (rrpriv->rx_ring)
pci_free_consistent(pdev, RX_TOTAL_SIZE, rrpriv->rx_ring,
rrpriv->rx_ring_dma);
ether_setup(dev);
dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
+ dev->priv_flags |= IFF_UNICAST_FLT;
dev->netdev_ops = &macvlan_netdev_ops;
dev->destructor = free_netdev;
dev->header_ops = &macvlan_hard_header_ops,
goto done;
spin_lock_irqsave(&target_list_lock, flags);
+restart:
list_for_each_entry(nt, &target_list, list) {
netconsole_target_get(nt);
if (nt->np.dev == dev) {
case NETDEV_UNREGISTER:
/*
* rtnl_lock already held
+ * we might sleep in __netpoll_cleanup()
*/
- if (nt->np.dev) {
- __netpoll_cleanup(&nt->np);
- dev_put(nt->np.dev);
- nt->np.dev = NULL;
- }
+ spin_unlock_irqrestore(&target_list_lock, flags);
+ __netpoll_cleanup(&nt->np);
+ spin_lock_irqsave(&target_list_lock, flags);
+ dev_put(nt->np.dev);
+ nt->np.dev = NULL;
nt->enabled = 0;
stopped = true;
- break;
+ netconsole_target_put(nt);
+ goto restart;
}
}
netconsole_target_put(nt);
netdev_upper_dev_unlink(port_dev, dev);
team_port_disable_netpoll(port);
vlan_vids_del_by_dev(port_dev, dev);
+ dev_uc_unsync(port_dev, dev);
+ dev_mc_unsync(port_dev, dev);
dev_close(port_dev);
team_port_leave(team, port);
goto drop;
skb_orphan(skb);
+ nf_reset(skb);
+
/* Enqueue packet */
skb_queue_tail(&tfile->socket.sk->sk_receive_queue, skb);
select CRC16
select CRC32
help
- This option adds support for SMSC LAN95XX based USB 2.0
+ This option adds support for SMSC LAN75XX based USB 2.0
Gigabit Ethernet adapters.
config USB_NET_SMSC95XX
struct cdc_ncm_ctx *ctx;
struct usb_driver *subdriver = ERR_PTR(-ENODEV);
int ret = -ENODEV;
- u8 data_altsetting = CDC_NCM_DATA_ALTSETTING_NCM;
+ u8 data_altsetting = cdc_ncm_select_altsetting(dev, intf);
struct cdc_mbim_state *info = (void *)&dev->data;
- /* see if interface supports MBIM alternate setting */
- if (intf->num_altsetting == 2) {
- if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
- usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_MBIM);
- data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM;
- }
-
/* Probably NCM, defer for cdc_ncm_bind */
if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
goto err;
#define DRIVER_VERSION "14-Mar-2012"
+#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
+static bool prefer_mbim = true;
+#else
+static bool prefer_mbim;
+#endif
+module_param(prefer_mbim, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions");
+
static void cdc_ncm_txpath_bh(unsigned long param);
static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx);
static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer);
}
EXPORT_SYMBOL_GPL(cdc_ncm_unbind);
-static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+/* Select the MBIM altsetting iff it is preferred and available,
+ * returning the number of the corresponding data interface altsetting
+ */
+u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf)
{
- int ret;
+ struct usb_host_interface *alt;
/* The MBIM spec defines a NCM compatible default altsetting,
* which we may have matched:
* endpoint descriptors, shall be constructed according to
* the rules given in section 6 (USB Device Model) of this
* specification."
- *
- * Do not bind to such interfaces, allowing cdc_mbim to handle
- * them
*/
-#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
- if ((intf->num_altsetting == 2) &&
- !usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_MBIM)) {
- if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
- return -ENODEV;
- else
- usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_NCM);
+ if (prefer_mbim && intf->num_altsetting == 2) {
+ alt = usb_altnum_to_altsetting(intf, CDC_NCM_COMM_ALTSETTING_MBIM);
+ if (alt && cdc_ncm_comm_intf_is_mbim(alt) &&
+ !usb_set_interface(dev->udev,
+ intf->cur_altsetting->desc.bInterfaceNumber,
+ CDC_NCM_COMM_ALTSETTING_MBIM))
+ return CDC_NCM_DATA_ALTSETTING_MBIM;
}
-#endif
+ return CDC_NCM_DATA_ALTSETTING_NCM;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_select_altsetting);
+
+static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret;
+
+ /* MBIM backwards compatible function? */
+ cdc_ncm_select_altsetting(dev, intf);
+ if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
+ return -ENODEV;
/* NCM data altsetting is always 1 */
ret = cdc_ncm_bind_common(dev, intf, 1);
BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) < sizeof(struct qmi_wwan_state)));
- /* control and data is shared? */
- if (intf->cur_altsetting->desc.bNumEndpoints == 3) {
- info->control = intf;
- info->data = intf;
- goto shared;
- }
-
- /* else require a single interrupt status endpoint on control intf */
- if (intf->cur_altsetting->desc.bNumEndpoints != 1)
- goto err;
+ /* set up initial state */
+ info->control = intf;
+ info->data = intf;
/* and a number of CDC descriptors */
while (len > 3) {
buf += h->bLength;
}
- /* did we find all the required ones? */
- if (!(found & (1 << USB_CDC_HEADER_TYPE)) ||
- !(found & (1 << USB_CDC_UNION_TYPE))) {
- dev_err(&intf->dev, "CDC functional descriptors missing\n");
- goto err;
- }
-
- /* verify CDC Union */
- if (desc->bInterfaceNumber != cdc_union->bMasterInterface0) {
- dev_err(&intf->dev, "bogus CDC Union: master=%u\n", cdc_union->bMasterInterface0);
- goto err;
- }
-
- /* need to save these for unbind */
- info->control = intf;
- info->data = usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0);
- if (!info->data) {
- dev_err(&intf->dev, "bogus CDC Union: slave=%u\n", cdc_union->bSlaveInterface0);
- goto err;
+ /* Use separate control and data interfaces if we found a CDC Union */
+ if (cdc_union) {
+ info->data = usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0);
+ if (desc->bInterfaceNumber != cdc_union->bMasterInterface0 || !info->data) {
+ dev_err(&intf->dev, "bogus CDC Union: master=%u, slave=%u\n",
+ cdc_union->bMasterInterface0, cdc_union->bSlaveInterface0);
+ goto err;
+ }
}
/* errors aren't fatal - we can live with the dynamic address */
}
/* claim data interface and set it up */
- status = usb_driver_claim_interface(driver, info->data, dev);
- if (status < 0)
- goto err;
+ if (info->control != info->data) {
+ status = usb_driver_claim_interface(driver, info->data, dev);
+ if (status < 0)
+ goto err;
+ }
-shared:
status = qmi_wwan_register_subdriver(dev);
if (status < 0 && info->control != info->data) {
usb_set_intfdata(info->data, NULL);
static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
{
struct usbnet *dev = netdev_priv(netdev);
+ int ret;
+
+ if (new_mtu > MAX_SINGLE_PACKET_SIZE)
+ return -EINVAL;
- int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu);
+ ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
if (ret < 0) {
netdev_warn(dev->net, "Failed to set mac rx frame length\n");
return ret;
netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x\n", buf);
- ret = smsc75xx_set_rx_max_frame_length(dev, 1514);
+ ret = smsc75xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
if (ret < 0) {
netdev_warn(dev->net, "Failed to set max rx frame length\n");
return ret;
else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
dev->net->stats.rx_frame_errors++;
} else {
- /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
- if (unlikely(size > (ETH_FRAME_LEN + 12))) {
+ /* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
+ if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) {
netif_dbg(dev, rx_err, dev->net,
"size err rx_cmd_a=0x%08x\n",
rx_cmd_a);
adapter->num_rx_queues = num_rx_queues;
adapter->num_tx_queues = num_tx_queues;
+ adapter->rx_buf_per_pkt = 1;
size = sizeof(struct Vmxnet3_TxQueueDesc) * adapter->num_tx_queues;
size += sizeof(struct Vmxnet3_RxQueueDesc) * adapter->num_rx_queues;
VMXNET3_RX_RING_MAX_SIZE)
return -EINVAL;
+ /* if adapter not yet initialized, do nothing */
+ if (adapter->rx_buf_per_pkt == 0) {
+ netdev_err(netdev, "adapter not completely initialized, "
+ "ring size cannot be changed yet\n");
+ return -EOPNOTSUPP;
+ }
/* round it up to a multiple of VMXNET3_RING_SIZE_ALIGN */
new_tx_ring_size = (param->tx_pending + VMXNET3_RING_SIZE_MASK) &
/*
* Version numbers
*/
-#define VMXNET3_DRIVER_VERSION_STRING "1.1.29.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING "1.1.30.0-k"
/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM 0x01011D00
+#define VMXNET3_DRIVER_VERSION_NUM 0x01011E00
#if defined(CONFIG_PCI_MSI)
/* RSS only makes sense if MSI-X is supported. */
iph->ttl = ttl ? : ip4_dst_hoplimit(&rt->dst);
tunnel_ip_select_ident(skb, old_iph, &rt->dst);
+ nf_reset(skb);
+
vxlan_set_owner(dev, skb);
/* See iptunnel_xmit() */
static __net_exit void vxlan_exit_net(struct net *net)
{
struct vxlan_net *vn = net_generic(net, vxlan_net_id);
+ struct vxlan_dev *vxlan;
+ unsigned h;
+
+ rtnl_lock();
+ for (h = 0; h < VNI_HASH_SIZE; ++h)
+ hlist_for_each_entry(vxlan, &vn->vni_list[h], hlist)
+ dev_close(vxlan->dev);
+ rtnl_unlock();
if (vn->sock) {
sk_release_kernel(vn->sock->sk);
AR_PHY_AGC_CONTROL_FLTR_CAL |
AR_PHY_AGC_CONTROL_PKDET_CAL;
+ /* Use chip chainmask only for calibration */
ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask);
if (rtt) {
ar9003_hw_rtt_disable(ah);
}
+ /* Revert chainmask to runtime parameters */
+ ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
+
/* Initialize list pointers */
ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
int i;
bool needreset = false;
- for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
- if (ATH_TXQ_SETUP(sc, i)) {
- txq = &sc->tx.txq[i];
- ath_txq_lock(sc, txq);
- if (txq->axq_depth) {
- if (txq->axq_tx_inprogress) {
- needreset = true;
- ath_txq_unlock(sc, txq);
- break;
- } else {
- txq->axq_tx_inprogress = true;
- }
+ for (i = 0; i < IEEE80211_NUM_ACS; i++) {
+ txq = sc->tx.txq_map[i];
+
+ ath_txq_lock(sc, txq);
+ if (txq->axq_depth) {
+ if (txq->axq_tx_inprogress) {
+ needreset = true;
+ ath_txq_unlock(sc, txq);
+ break;
+ } else {
+ txq->axq_tx_inprogress = true;
}
- ath_txq_unlock_complete(sc, txq);
}
+ ath_txq_unlock_complete(sc, txq);
+ }
if (needreset) {
ath_dbg(ath9k_hw_common(sc->sc_ah), RESET,
{
struct ath_softc *sc = (struct ath_softc *)data;
- ieee80211_queue_work(sc->hw, &sc->hw_check_work);
+ if (!test_bit(SC_OP_INVALID, &sc->sc_flags))
+ ieee80211_queue_work(sc->hw, &sc->hw_check_work);
}
/*
const struct b43_dma_ops *ops;
struct b43_dmaring *ring;
struct b43_dmadesc_meta *meta;
+ static const struct b43_txstatus fake; /* filled with 0 */
+ const struct b43_txstatus *txstat;
int slot, firstused;
bool frame_succeed;
+ int skip;
+ static u8 err_out1, err_out2;
ring = parse_cookie(dev, status->cookie, &slot);
if (unlikely(!ring))
firstused = ring->current_slot - ring->used_slots + 1;
if (firstused < 0)
firstused = ring->nr_slots + firstused;
+
+ skip = 0;
if (unlikely(slot != firstused)) {
/* This possibly is a firmware bug and will result in
- * malfunction, memory leaks and/or stall of DMA functionality. */
- b43dbg(dev->wl, "Out of order TX status report on DMA ring %d. "
- "Expected %d, but got %d\n",
- ring->index, firstused, slot);
- return;
+ * malfunction, memory leaks and/or stall of DMA functionality.
+ */
+ if (slot == next_slot(ring, next_slot(ring, firstused))) {
+ /* If a single header/data pair was missed, skip over
+ * the first two slots in an attempt to recover.
+ */
+ slot = firstused;
+ skip = 2;
+ if (!err_out1) {
+ /* Report the error once. */
+ b43dbg(dev->wl,
+ "Skip on DMA ring %d slot %d.\n",
+ ring->index, slot);
+ err_out1 = 1;
+ }
+ } else {
+ /* More than a single header/data pair were missed.
+ * Report this error once.
+ */
+ if (!err_out2)
+ b43dbg(dev->wl,
+ "Out of order TX status report on DMA ring %d. Expected %d, but got %d\n",
+ ring->index, firstused, slot);
+ err_out2 = 1;
+ return;
+ }
}
ops = ring->ops;
slot, firstused, ring->index);
break;
}
+
if (meta->skb) {
struct b43_private_tx_info *priv_info =
- b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
+ b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
- unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, 1);
+ unmap_descbuffer(ring, meta->dmaaddr,
+ meta->skb->len, 1);
kfree(priv_info->bouncebuffer);
priv_info->bouncebuffer = NULL;
} else {
struct ieee80211_tx_info *info;
if (unlikely(!meta->skb)) {
- /* This is a scatter-gather fragment of a frame, so
- * the skb pointer must not be NULL. */
+ /* This is a scatter-gather fragment of a frame,
+ * so the skb pointer must not be NULL.
+ */
b43dbg(dev->wl, "TX status unexpected NULL skb "
"at slot %d (first=%d) on ring %d\n",
slot, firstused, ring->index);
/*
* Call back to inform the ieee80211 subsystem about
- * the status of the transmission.
+ * the status of the transmission. When skipping over
+ * a missed TX status report, use a status structure
+ * filled with zeros to indicate that the frame was not
+ * sent (frame_count 0) and not acknowledged
*/
- frame_succeed = b43_fill_txstatus_report(dev, info, status);
+ if (unlikely(skip))
+ txstat = &fake;
+ else
+ txstat = status;
+
+ frame_succeed = b43_fill_txstatus_report(dev, info,
+ txstat);
#ifdef CONFIG_B43_DEBUG
if (frame_succeed)
ring->nr_succeed_tx_packets++;
/* Everything unmapped and free'd. So it's not used anymore. */
ring->used_slots--;
- if (meta->is_last_fragment) {
+ if (meta->is_last_fragment && !skip) {
/* This is the last scatter-gather
* fragment of the frame. We are done. */
break;
}
slot = next_slot(ring, slot);
+ if (skip > 0)
+ --skip;
}
if (ring->stopped) {
B43_WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME);
u16 clip_off[2] = { 0xFFFF, 0xFFFF };
u8 vcm_final = 0;
- s8 offset[4];
+ s32 offset[4];
s32 results[8][4] = { };
s32 results_min[4] = { };
s32 poll_results[4] = { };
}
for (i = 0; i < 4; i += 2) {
s32 curr;
- s32 mind = 40;
+ s32 mind = 0x100000;
s32 minpoll = 249;
u8 minvcm = 0;
if (2 * core != i)
u8 regs_save_radio[2];
u16 regs_save_phy[2];
- s8 offset[4];
+ s32 offset[4];
u8 core;
u8 rail;
}
for (i = 0; i < 4; i++) {
- s32 mind = 40;
+ s32 mind = 0x100000;
u8 minvcm = 0;
s32 minpoll = 249;
s32 curr;
gain0_15 = ((biq1 & 0xf) << 12) |
((tia & 0xf) << 8) |
((lna2 & 0x3) << 6) |
- ((lna2 & 0x3) << 4) |
- ((lna1 & 0x3) << 2) |
- ((lna1 & 0x3) << 0);
+ ((lna2 &
+ 0x3) << 4) | ((lna1 & 0x3) << 2) | ((lna1 & 0x3) << 0);
mod_phy_reg(pi, 0x4b6, (0xffff << 0), gain0_15 << 0);
mod_phy_reg(pi, 0x4b7, (0xf << 0), gain16_19 << 0);
}
mod_phy_reg(pi, 0x44d, (0x1 << 0), (!trsw) << 0);
- mod_phy_reg(pi, 0x4b1, (0x3 << 11), lna1 << 11);
- mod_phy_reg(pi, 0x4e6, (0x3 << 3), lna1 << 3);
}
return (iq_est.i_pwr + iq_est.q_pwr) / nsamples;
}
-static bool wlc_lcnphy_rx_iq_cal_gain(struct brcms_phy *pi, u16 biq1_gain,
- u16 tia_gain, u16 lna2_gain)
-{
- u32 i_thresh_l, q_thresh_l;
- u32 i_thresh_h, q_thresh_h;
- struct lcnphy_iq_est iq_est_h, iq_est_l;
-
- wlc_lcnphy_set_rx_gain_by_distribution(pi, 0, 0, 0, biq1_gain, tia_gain,
- lna2_gain, 0);
-
- wlc_lcnphy_rx_gain_override_enable(pi, true);
- wlc_lcnphy_start_tx_tone(pi, 2000, (40 >> 1), 0);
- udelay(500);
- write_radio_reg(pi, RADIO_2064_REG112, 0);
- if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_l))
- return false;
-
- wlc_lcnphy_start_tx_tone(pi, 2000, 40, 0);
- udelay(500);
- write_radio_reg(pi, RADIO_2064_REG112, 0);
- if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_h))
- return false;
-
- i_thresh_l = (iq_est_l.i_pwr << 1);
- i_thresh_h = (iq_est_l.i_pwr << 2) + iq_est_l.i_pwr;
-
- q_thresh_l = (iq_est_l.q_pwr << 1);
- q_thresh_h = (iq_est_l.q_pwr << 2) + iq_est_l.q_pwr;
- if ((iq_est_h.i_pwr > i_thresh_l) &&
- (iq_est_h.i_pwr < i_thresh_h) &&
- (iq_est_h.q_pwr > q_thresh_l) &&
- (iq_est_h.q_pwr < q_thresh_h))
- return true;
-
- return false;
-}
-
static bool
wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
const struct lcnphy_rx_iqcomp *iqcomp,
RFOverrideVal0_old, rfoverride2_old, rfoverride2val_old,
rfoverride3_old, rfoverride3val_old, rfoverride4_old,
rfoverride4val_old, afectrlovr_old, afectrlovrval_old;
- int tia_gain, lna2_gain, biq1_gain;
- bool set_gain;
+ int tia_gain;
+ u32 received_power, rx_pwr_threshold;
u16 old_sslpnCalibClkEnCtrl, old_sslpnRxFeClkEnCtrl;
u16 values_to_save[11];
s16 *ptr;
goto cal_done;
}
- WARN_ON(module != 1);
- tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
- wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF);
-
- for (i = 0; i < 11; i++)
- values_to_save[i] =
- read_radio_reg(pi, rxiq_cal_rf_reg[i]);
- Core1TxControl_old = read_phy_reg(pi, 0x631);
-
- or_phy_reg(pi, 0x631, 0x0015);
-
- RFOverride0_old = read_phy_reg(pi, 0x44c);
- RFOverrideVal0_old = read_phy_reg(pi, 0x44d);
- rfoverride2_old = read_phy_reg(pi, 0x4b0);
- rfoverride2val_old = read_phy_reg(pi, 0x4b1);
- rfoverride3_old = read_phy_reg(pi, 0x4f9);
- rfoverride3val_old = read_phy_reg(pi, 0x4fa);
- rfoverride4_old = read_phy_reg(pi, 0x938);
- rfoverride4val_old = read_phy_reg(pi, 0x939);
- afectrlovr_old = read_phy_reg(pi, 0x43b);
- afectrlovrval_old = read_phy_reg(pi, 0x43c);
- old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da);
- old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db);
-
- tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi);
- if (tx_gain_override_old) {
- wlc_lcnphy_get_tx_gain(pi, &old_gains);
- tx_gain_index_old = pi_lcn->lcnphy_current_index;
- }
-
- wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx);
+ if (module == 1) {
- mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0);
- mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0);
+ tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
+ wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF);
- mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1);
- mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1);
+ for (i = 0; i < 11; i++)
+ values_to_save[i] =
+ read_radio_reg(pi, rxiq_cal_rf_reg[i]);
+ Core1TxControl_old = read_phy_reg(pi, 0x631);
+
+ or_phy_reg(pi, 0x631, 0x0015);
+
+ RFOverride0_old = read_phy_reg(pi, 0x44c);
+ RFOverrideVal0_old = read_phy_reg(pi, 0x44d);
+ rfoverride2_old = read_phy_reg(pi, 0x4b0);
+ rfoverride2val_old = read_phy_reg(pi, 0x4b1);
+ rfoverride3_old = read_phy_reg(pi, 0x4f9);
+ rfoverride3val_old = read_phy_reg(pi, 0x4fa);
+ rfoverride4_old = read_phy_reg(pi, 0x938);
+ rfoverride4val_old = read_phy_reg(pi, 0x939);
+ afectrlovr_old = read_phy_reg(pi, 0x43b);
+ afectrlovrval_old = read_phy_reg(pi, 0x43c);
+ old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da);
+ old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db);
+
+ tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi);
+ if (tx_gain_override_old) {
+ wlc_lcnphy_get_tx_gain(pi, &old_gains);
+ tx_gain_index_old = pi_lcn->lcnphy_current_index;
+ }
- write_radio_reg(pi, RADIO_2064_REG116, 0x06);
- write_radio_reg(pi, RADIO_2064_REG12C, 0x07);
- write_radio_reg(pi, RADIO_2064_REG06A, 0xd3);
- write_radio_reg(pi, RADIO_2064_REG098, 0x03);
- write_radio_reg(pi, RADIO_2064_REG00B, 0x7);
- mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4);
- write_radio_reg(pi, RADIO_2064_REG01D, 0x01);
- write_radio_reg(pi, RADIO_2064_REG114, 0x01);
- write_radio_reg(pi, RADIO_2064_REG02E, 0x10);
- write_radio_reg(pi, RADIO_2064_REG12A, 0x08);
-
- mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0);
- mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0);
- mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1);
- mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1);
- mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2);
- mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2);
- mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3);
- mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3);
- mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5);
- mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5);
+ wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx);
- mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0);
- mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0);
+ mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0);
+ mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0);
- write_phy_reg(pi, 0x6da, 0xffff);
- or_phy_reg(pi, 0x6db, 0x3);
+ mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1);
+ mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1);
- wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
- set_gain = false;
-
- lna2_gain = 3;
- while ((lna2_gain >= 0) && !set_gain) {
- tia_gain = 4;
-
- while ((tia_gain >= 0) && !set_gain) {
- biq1_gain = 6;
-
- while ((biq1_gain >= 0) && !set_gain) {
- set_gain = wlc_lcnphy_rx_iq_cal_gain(pi,
- (u16)
- biq1_gain,
- (u16)
- tia_gain,
- (u16)
- lna2_gain);
- biq1_gain -= 1;
- }
+ write_radio_reg(pi, RADIO_2064_REG116, 0x06);
+ write_radio_reg(pi, RADIO_2064_REG12C, 0x07);
+ write_radio_reg(pi, RADIO_2064_REG06A, 0xd3);
+ write_radio_reg(pi, RADIO_2064_REG098, 0x03);
+ write_radio_reg(pi, RADIO_2064_REG00B, 0x7);
+ mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4);
+ write_radio_reg(pi, RADIO_2064_REG01D, 0x01);
+ write_radio_reg(pi, RADIO_2064_REG114, 0x01);
+ write_radio_reg(pi, RADIO_2064_REG02E, 0x10);
+ write_radio_reg(pi, RADIO_2064_REG12A, 0x08);
+
+ mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0);
+ mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0);
+ mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1);
+ mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1);
+ mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2);
+ mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2);
+ mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3);
+ mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3);
+ mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5);
+ mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5);
+
+ mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0);
+ mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0);
+
+ wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0);
+ write_phy_reg(pi, 0x6da, 0xffff);
+ or_phy_reg(pi, 0x6db, 0x3);
+ wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
+ wlc_lcnphy_rx_gain_override_enable(pi, true);
+
+ tia_gain = 8;
+ rx_pwr_threshold = 950;
+ while (tia_gain > 0) {
tia_gain -= 1;
+ wlc_lcnphy_set_rx_gain_by_distribution(pi,
+ 0, 0, 2, 2,
+ (u16)
+ tia_gain, 1, 0);
+ udelay(500);
+
+ received_power =
+ wlc_lcnphy_measure_digital_power(pi, 2000);
+ if (received_power < rx_pwr_threshold)
+ break;
}
- lna2_gain -= 1;
- }
+ result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff);
- if (set_gain)
- result = wlc_lcnphy_calc_rx_iq_comp(pi, 1024);
- else
- result = false;
+ wlc_lcnphy_stop_tx_tone(pi);
- wlc_lcnphy_stop_tx_tone(pi);
+ write_phy_reg(pi, 0x631, Core1TxControl_old);
- write_phy_reg(pi, 0x631, Core1TxControl_old);
-
- write_phy_reg(pi, 0x44c, RFOverrideVal0_old);
- write_phy_reg(pi, 0x44d, RFOverrideVal0_old);
- write_phy_reg(pi, 0x4b0, rfoverride2_old);
- write_phy_reg(pi, 0x4b1, rfoverride2val_old);
- write_phy_reg(pi, 0x4f9, rfoverride3_old);
- write_phy_reg(pi, 0x4fa, rfoverride3val_old);
- write_phy_reg(pi, 0x938, rfoverride4_old);
- write_phy_reg(pi, 0x939, rfoverride4val_old);
- write_phy_reg(pi, 0x43b, afectrlovr_old);
- write_phy_reg(pi, 0x43c, afectrlovrval_old);
- write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl);
- write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl);
+ write_phy_reg(pi, 0x44c, RFOverrideVal0_old);
+ write_phy_reg(pi, 0x44d, RFOverrideVal0_old);
+ write_phy_reg(pi, 0x4b0, rfoverride2_old);
+ write_phy_reg(pi, 0x4b1, rfoverride2val_old);
+ write_phy_reg(pi, 0x4f9, rfoverride3_old);
+ write_phy_reg(pi, 0x4fa, rfoverride3val_old);
+ write_phy_reg(pi, 0x938, rfoverride4_old);
+ write_phy_reg(pi, 0x939, rfoverride4val_old);
+ write_phy_reg(pi, 0x43b, afectrlovr_old);
+ write_phy_reg(pi, 0x43c, afectrlovrval_old);
+ write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl);
+ write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl);
- wlc_lcnphy_clear_trsw_override(pi);
+ wlc_lcnphy_clear_trsw_override(pi);
- mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2);
+ mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2);
- for (i = 0; i < 11; i++)
- write_radio_reg(pi, rxiq_cal_rf_reg[i],
- values_to_save[i]);
+ for (i = 0; i < 11; i++)
+ write_radio_reg(pi, rxiq_cal_rf_reg[i],
+ values_to_save[i]);
- if (tx_gain_override_old)
- wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old);
- else
- wlc_lcnphy_disable_tx_gain_override(pi);
+ if (tx_gain_override_old)
+ wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old);
+ else
+ wlc_lcnphy_disable_tx_gain_override(pi);
- wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl);
- wlc_lcnphy_rx_gain_override_enable(pi, false);
+ wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl);
+ wlc_lcnphy_rx_gain_override_enable(pi, false);
+ }
cal_done:
kfree(ptr);
write_radio_reg(pi, RADIO_2064_REG038, 3);
write_radio_reg(pi, RADIO_2064_REG091, 7);
}
-
- if (!(pi->sh->boardflags & BFL_FEM)) {
- u8 reg038[14] = {0xd, 0xe, 0xd, 0xd, 0xd, 0xc,
- 0xa, 0xb, 0xb, 0x3, 0x3, 0x2, 0x0, 0x0};
-
- write_radio_reg(pi, RADIO_2064_REG02A, 0xf);
- write_radio_reg(pi, RADIO_2064_REG091, 0x3);
- write_radio_reg(pi, RADIO_2064_REG038, 0x3);
-
- write_radio_reg(pi, RADIO_2064_REG038, reg038[channel - 1]);
- }
}
static int
} else {
mod_radio_reg(pi, RADIO_2064_REG03A, 1, 0x1);
mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8);
- mod_radio_reg(pi, RADIO_2064_REG028, 0x1, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG11A, 0x4, 1<<2);
- mod_radio_reg(pi, RADIO_2064_REG036, 0x10, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG11A, 0x10, 1<<4);
- mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x77);
- mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, 0xe<<1);
- mod_radio_reg(pi, RADIO_2064_REG112, 0x80, 1<<7);
- mod_radio_reg(pi, RADIO_2064_REG005, 0x7, 1<<1);
- mod_radio_reg(pi, RADIO_2064_REG029, 0xf0, 0<<4);
}
} else {
mod_phy_reg(pi, 0x4d9, (0x1 << 2), (0x1) << 2);
(auxpga_vmid_temp << 0) | (auxpga_gain_temp << 12));
mod_radio_reg(pi, RADIO_2064_REG082, (1 << 5), (1 << 5));
- mod_radio_reg(pi, RADIO_2064_REG07C, (1 << 0), (1 << 0));
}
static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi)
{
struct phytbl_info tab;
u32 rfseq, ind;
- u8 tssi_sel;
tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL;
tab.tbl_width = 32;
mod_phy_reg(pi, 0x503, (0x1 << 4), (1) << 4);
- if (pi->sh->boardflags & BFL_FEM) {
- tssi_sel = 0x1;
- wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT);
- } else {
- tssi_sel = 0xe;
- wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_POST_PA);
- }
+ wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT);
mod_phy_reg(pi, 0x4a4, (0x1 << 14), (0) << 14);
mod_phy_reg(pi, 0x4a4, (0x1 << 15), (1) << 15);
mod_phy_reg(pi, 0x49a, (0x1ff << 0), (0xff) << 0);
if (LCNREV_IS(pi->pubpi.phy_rev, 2)) {
- mod_radio_reg(pi, RADIO_2064_REG028, 0xf, tssi_sel);
+ mod_radio_reg(pi, RADIO_2064_REG028, 0xf, 0xe);
mod_radio_reg(pi, RADIO_2064_REG086, 0x4, 0x4);
} else {
- mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, tssi_sel << 1);
mod_radio_reg(pi, RADIO_2064_REG03A, 0x1, 1);
mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 1 << 3);
}
mod_phy_reg(pi, 0x4d7, (0xf << 8), (0) << 8);
- mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8);
-
wlc_lcnphy_pwrctrl_rssiparams(pi);
}
read_radio_reg(pi, RADIO_2064_REG007) & 1;
u16 SAVE_jtag_auxpga = read_radio_reg(pi, RADIO_2064_REG0FF) & 0x10;
u16 SAVE_iqadc_aux_en = read_radio_reg(pi, RADIO_2064_REG11F) & 4;
- u8 SAVE_bbmult = wlc_lcnphy_get_bbmult(pi);
-
idleTssi = read_phy_reg(pi, 0x4ab);
suspend = (0 == (bcma_read32(pi->d11core, D11REGOFFS(maccontrol)) &
MCTL_EN_MAC));
mod_radio_reg(pi, RADIO_2064_REG0FF, 0x10, 1 << 4);
mod_radio_reg(pi, RADIO_2064_REG11F, 0x4, 1 << 2);
wlc_lcnphy_tssi_setup(pi);
-
- mod_phy_reg(pi, 0x4d7, (0x1 << 0), (1 << 0));
- mod_phy_reg(pi, 0x4d7, (0x1 << 6), (1 << 6));
-
- wlc_lcnphy_set_bbmult(pi, 0x0);
-
wlc_phy_do_dummy_tx(pi, true, OFF);
idleTssi = ((read_phy_reg(pi, 0x4ab) & (0x1ff << 0))
>> 0);
mod_phy_reg(pi, 0x44c, (0x1 << 12), (0) << 12);
- wlc_lcnphy_set_bbmult(pi, SAVE_bbmult);
wlc_lcnphy_set_tx_gain_override(pi, tx_gain_override_old);
wlc_lcnphy_set_tx_gain(pi, &old_gains);
wlc_lcnphy_set_tx_pwr_ctrl(pi, SAVE_txpwrctrl);
wlc_lcnphy_write_table(pi, &tab);
tab.tbl_offset++;
}
- mod_phy_reg(pi, 0x4d0, (0x1 << 0), (0) << 0);
- mod_phy_reg(pi, 0x4d3, (0xff << 0), (0) << 0);
- mod_phy_reg(pi, 0x4d3, (0xff << 8), (0) << 8);
- mod_phy_reg(pi, 0x4d0, (0x1 << 4), (0) << 4);
- mod_phy_reg(pi, 0x4d0, (0x1 << 2), (0) << 2);
mod_phy_reg(pi, 0x410, (0x1 << 7), (0) << 7);
target_gains.pad_gain = 21;
target_gains.dac_gain = 0;
wlc_lcnphy_set_tx_gain(pi, &target_gains);
+ wlc_lcnphy_set_tx_pwr_by_index(pi, 16);
if (LCNREV_IS(pi->pubpi.phy_rev, 1) || pi_lcn->lcnphy_hw_iqcal_en) {
lcnphy_recal ? LCNPHY_CAL_RECAL :
LCNPHY_CAL_FULL), false);
} else {
- wlc_lcnphy_set_tx_pwr_by_index(pi, 16);
wlc_lcnphy_tx_iqlo_soft_cal_full(pi);
}
if (CHSPEC_IS5G(pi->radio_chanspec))
pa_gain = 0x70;
else
- pa_gain = 0x60;
+ pa_gain = 0x70;
if (pi->sh->boardflags & BFL_FEM)
pa_gain = 0x10;
-
tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL;
tab.tbl_width = 32;
tab.tbl_len = 1;
tab.tbl_ptr = &val;
for (j = 0; j < 128; j++) {
- if (pi->sh->boardflags & BFL_FEM)
- gm_gain = gain_table[j].gm;
- else
- gm_gain = 15;
-
+ gm_gain = gain_table[j].gm;
val = (((u32) pa_gain << 24) |
(gain_table[j].pad << 16) |
(gain_table[j].pga << 8) | gm_gain);
write_phy_reg(pi, 0x4ea, 0x4688);
- if (pi->sh->boardflags & BFL_FEM)
- mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0);
- else
- mod_phy_reg(pi, 0x4eb, (0x7 << 0), 3 << 0);
+ mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0);
mod_phy_reg(pi, 0x4eb, (0x7 << 6), 0 << 6);
wlc_lcnphy_rcal(pi);
wlc_lcnphy_rc_cal(pi);
-
- if (!(pi->sh->boardflags & BFL_FEM)) {
- write_radio_reg(pi, RADIO_2064_REG032, 0x6f);
- write_radio_reg(pi, RADIO_2064_REG033, 0x19);
- write_radio_reg(pi, RADIO_2064_REG039, 0xe);
- }
-
}
static void wlc_lcnphy_radio_init(struct brcms_phy *pi)
wlc_lcnphy_write_table(pi, &tab);
}
- if (!(pi->sh->boardflags & BFL_FEM)) {
- tab.tbl_id = LCNPHY_TBL_ID_RFSEQ;
- tab.tbl_width = 16;
- tab.tbl_ptr = &val;
- tab.tbl_len = 1;
+ tab.tbl_id = LCNPHY_TBL_ID_RFSEQ;
+ tab.tbl_width = 16;
+ tab.tbl_ptr = &val;
+ tab.tbl_len = 1;
- val = 150;
- tab.tbl_offset = 0;
- wlc_lcnphy_write_table(pi, &tab);
+ val = 114;
+ tab.tbl_offset = 0;
+ wlc_lcnphy_write_table(pi, &tab);
- val = 220;
- tab.tbl_offset = 1;
- wlc_lcnphy_write_table(pi, &tab);
- }
+ val = 130;
+ tab.tbl_offset = 1;
+ wlc_lcnphy_write_table(pi, &tab);
+
+ val = 6;
+ tab.tbl_offset = 8;
+ wlc_lcnphy_write_table(pi, &tab);
if (CHSPEC_IS2G(pi->radio_chanspec)) {
if (pi->sh->boardflags & BFL_FEM)
wlc_lcnphy_load_tx_iir_filter(pi, true, 3);
mod_phy_reg(pi, 0x4eb, (0x7 << 3), (1) << 3);
- wlc_lcnphy_tssi_setup(pi);
}
void wlc_phy_detach_lcnphy(struct brcms_phy *pi)
if (!wlc_phy_txpwr_srom_read_lcnphy(pi))
return false;
- if (LCNREV_IS(pi->pubpi.phy_rev, 1)) {
+ if ((pi->sh->boardflags & BFL_FEM) &&
+ (LCNREV_IS(pi->pubpi.phy_rev, 1))) {
if (pi_lcn->lcnphy_tempsense_option == 3) {
pi->hwpwrctrl = true;
pi->hwpwrctrl_capable = true;
};
static const u16 dot11lcn_sw_ctrl_tbl_4313_rev0[] = {
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
- 0x0009,
- 0x000a,
0x0005,
- 0x0006,
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
- 0x0009,
- 0x000a,
0x0005,
- 0x0006,
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
- 0x0009,
- 0x000a,
0x0005,
- 0x0006,
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
- 0x0009,
- 0x000a,
0x0005,
- 0x0006,
+ 0x000a,
0x0009,
+ 0x0006,
+ 0x0005,
0x000a,
+ 0x0009,
+ 0x0006,
0x0005,
+ 0x000a,
+ 0x0009,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
+ 0x0006,
+ 0x0005,
0x000a,
+ 0x0009,
+ 0x0006,
0x0005,
+ 0x000a,
+ 0x0009,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
+ 0x0006,
+ 0x0005,
0x000a,
+ 0x0009,
+ 0x0006,
0x0005,
+ 0x000a,
+ 0x0009,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
+ 0x0006,
+ 0x0005,
0x000a,
+ 0x0009,
+ 0x0006,
0x0005,
+ 0x000a,
+ 0x0009,
0x0006,
+ 0x0005,
};
static const u16 dot11lcn_sw_ctrl_tbl_rev0[] = {
dma_addr_t txcmd_phys;
int txq_id = skb_get_queue_mapping(skb);
u16 len, idx, hdr_len;
+ u16 firstlen, secondlen;
u8 id;
u8 unicast;
u8 sta_id;
len =
sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) +
hdr_len;
- len = (len + 3) & ~3;
+ firstlen = (len + 3) & ~3;
/* Physical address of this Tx command's header (not MAC header!),
* within command buffer array. */
txcmd_phys =
- pci_map_single(il->pci_dev, &out_cmd->hdr, len, PCI_DMA_TODEVICE);
+ pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen,
+ PCI_DMA_TODEVICE);
if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys)))
goto drop_unlock;
/* Set up TFD's 2nd entry to point directly to remainder of skb,
* if any (802.11 null frames have no payload). */
- len = skb->len - hdr_len;
- if (len) {
+ secondlen = skb->len - hdr_len;
+ if (secondlen > 0) {
phys_addr =
- pci_map_single(il->pci_dev, skb->data + hdr_len, len,
+ pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen,
PCI_DMA_TODEVICE);
if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr)))
goto drop_unlock;
/* Add buffer containing Tx command and MAC(!) header to TFD's
* first entry */
- il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, len, 1, 0);
+ il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
- dma_unmap_len_set(out_meta, len, len);
- if (len)
- il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, len, 0,
- U32_PAD(len));
+ dma_unmap_len_set(out_meta, len, firstlen);
+ if (secondlen > 0)
+ il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0,
+ U32_PAD(secondlen));
if (!ieee80211_has_morefrags(hdr->frame_control)) {
txq->need_update = 1;
int rate_idx;
int i;
u32 rate;
- u8 use_green = il4965_rs_use_green(il, sta);
+ u8 use_green;
u8 active_tbl = 0;
u8 valid_tx_ant;
struct il_station_priv *sta_priv;
if (!sta || !lq_sta)
return;
+ use_green = il4965_rs_use_green(il, sta);
sta_priv = (void *)sta->drv_priv;
i = lq_sta->last_txrate_idx;
return -EIO;
}
+ /*
+ * This can happen upon FW ASSERT: we clear the STATUS_FW_ERROR flag
+ * in iwl_down but cancel the workers only later.
+ */
+ if (!priv->ucode_loaded) {
+ IWL_ERR(priv, "Fw not loaded - dropping CMD: %x\n", cmd->id);
+ return -EIO;
+ }
+
/*
* Synchronous commands from this op-mode must hold
* the mutex, this ensures we don't try to send two
mutex_lock(&priv->mutex);
+ if (changes & BSS_CHANGED_IDLE && bss_conf->idle) {
+ /*
+ * If we go idle, then clearly no "passive-no-rx"
+ * workaround is needed any more, this is a reset.
+ */
+ iwlagn_lift_passive_no_rx(priv);
+ }
+
if (unlikely(!iwl_is_ready(priv))) {
IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
mutex_unlock(&priv->mutex);
priv->timestamp = bss_conf->sync_tsf;
ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
} else {
- /*
- * If we disassociate while there are pending
- * frames, just wake up the queues and let the
- * frames "escape" ... This shouldn't really
- * be happening to start with, but we should
- * not get stuck in this case either since it
- * can happen if userspace gets confused.
- */
- iwlagn_lift_passive_no_rx(priv);
-
ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
if (ctx->ctxid == IWL_RXON_CTX_BSS)
sta_id, sta->sta.addr, flags & CMD_ASYNC ? "a" : "");
if (!(flags & CMD_ASYNC)) {
- cmd.flags |= CMD_WANT_SKB | CMD_WANT_HCMD;
+ cmd.flags |= CMD_WANT_SKB;
might_sleep();
}
memset(&info->status, 0, sizeof(info->status));
if (status == TX_STATUS_FAIL_PASSIVE_NO_RX &&
- iwl_is_associated_ctx(ctx) && ctx->vif &&
+ ctx->vif &&
ctx->vif->type == NL80211_IFTYPE_STATION) {
/* block and stop all queues */
priv->passive_no_rx = true;
return -EIO;
}
+ priv->ucode_loaded = true;
+
if (ucode_type != IWL_UCODE_WOWLAN) {
/* delay a bit to give rfkill time to run */
msleep(5);
return ret;
}
- priv->ucode_loaded = true;
-
return 0;
}
__entry->flags = cmd->flags;
memcpy(__get_dynamic_array(hcmd), hdr, sizeof(*hdr));
- for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
+ for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
if (!cmd->len[i])
continue;
memcpy((u8 *)__get_dynamic_array(hcmd) + offset,
/* shared module parameters */
struct iwl_mod_params iwlwifi_mod_params = {
- .amsdu_size_8K = 1,
.restart_fw = 1,
.plcp_check = true,
.bt_coex_active = true,
"disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX");
module_param_named(amsdu_size_8K, iwlwifi_mod_params.amsdu_size_8K,
int, S_IRUGO);
-MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
+MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0)");
module_param_named(fw_restart, iwlwifi_mod_params.restart_fw, int, S_IRUGO);
MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
* @sw_crypto: using hardware encryption, default = 0
* @disable_11n: disable 11n capabilities, default = 0,
* use IWL_DISABLE_HT_* constants
- * @amsdu_size_8K: enable 8K amsdu size, default = 1
+ * @amsdu_size_8K: enable 8K amsdu size, default = 0
* @restart_fw: restart firmware, default = 1
* @plcp_check: enable plcp health check, default = true
* @wd_disable: enable stuck queue check, default = 0
* @CMD_ASYNC: Return right away and don't want for the response
* @CMD_WANT_SKB: valid only with CMD_SYNC. The caller needs the buffer of the
* response. The caller needs to call iwl_free_resp when done.
- * @CMD_WANT_HCMD: The caller needs to get the HCMD that was sent in the
- * response handler. Chunks flagged by %IWL_HCMD_DFL_NOCOPY won't be
- * copied. The pointer passed to the response handler is in the transport
- * ownership and don't need to be freed by the op_mode. This also means
- * that the pointer is invalidated after the op_mode's handler returns.
* @CMD_ON_DEMAND: This command is sent by the test mode pipe.
*/
enum CMD_MODE {
CMD_SYNC = 0,
CMD_ASYNC = BIT(0),
CMD_WANT_SKB = BIT(1),
- CMD_WANT_HCMD = BIT(2),
- CMD_ON_DEMAND = BIT(3),
+ CMD_ON_DEMAND = BIT(2),
};
#define DEF_CMD_PAYLOAD_SIZE 320
#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
-#define IWL_MAX_CMD_TFDS 2
+/*
+ * number of transfer buffers (fragments) per transmit frame descriptor;
+ * this is just the driver's idea, the hardware supports 20
+ */
+#define IWL_MAX_CMD_TBS_PER_TFD 2
/**
* struct iwl_hcmd_dataflag - flag for each one of the chunks of the command
* @id: id of the host command
*/
struct iwl_host_cmd {
- const void *data[IWL_MAX_CMD_TFDS];
+ const void *data[IWL_MAX_CMD_TBS_PER_TFD];
struct iwl_rx_packet *resp_pkt;
unsigned long _rx_page_addr;
u32 _rx_page_order;
int handler_status;
u32 flags;
- u16 len[IWL_MAX_CMD_TFDS];
- u8 dataflags[IWL_MAX_CMD_TFDS];
+ u16 len[IWL_MAX_CMD_TBS_PER_TFD];
+ u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
u8 id;
};
#define IWL_RX_INFO_PHY_CNT 8
#define IWL_RX_INFO_AGC_IDX 1
#define IWL_RX_INFO_RSSI_AB_IDX 2
-#define IWL_RX_INFO_RSSI_C_IDX 3
-#define IWL_OFDM_AGC_DB_MSK 0xfe00
-#define IWL_OFDM_AGC_DB_POS 9
+#define IWL_OFDM_AGC_A_MSK 0x0000007f
+#define IWL_OFDM_AGC_A_POS 0
+#define IWL_OFDM_AGC_B_MSK 0x00003f80
+#define IWL_OFDM_AGC_B_POS 7
+#define IWL_OFDM_AGC_CODE_MSK 0x3fe00000
+#define IWL_OFDM_AGC_CODE_POS 20
#define IWL_OFDM_RSSI_INBAND_A_MSK 0x00ff
-#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00
#define IWL_OFDM_RSSI_A_POS 0
+#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00
+#define IWL_OFDM_RSSI_ALLBAND_A_POS 8
#define IWL_OFDM_RSSI_INBAND_B_MSK 0xff0000
-#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
#define IWL_OFDM_RSSI_B_POS 16
-#define IWL_OFDM_RSSI_INBAND_C_MSK 0x00ff
-#define IWL_OFDM_RSSI_ALLBAND_C_MSK 0xff00
-#define IWL_OFDM_RSSI_C_POS 0
+#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
+#define IWL_OFDM_RSSI_ALLBAND_B_POS 24
/**
* struct iwl_rx_phy_info - phy info
#define UCODE_VALID_OK cpu_to_le32(0x1)
/* Default calibration values for WkP - set to INIT image w/o running */
-static const u8 wkp_calib_values_bb_filter[] = { 0xbf, 0x00, 0x5f, 0x00, 0x2f,
- 0x00, 0x18, 0x00 };
-static const u8 wkp_calib_values_rx_dc[] = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f,
- 0x7f, 0x7f, 0x7f };
-static const u8 wkp_calib_values_tx_lo[] = { 0x00, 0x00, 0x00, 0x00 };
-static const u8 wkp_calib_values_tx_iq[] = { 0xff, 0x00, 0xff, 0x00, 0x00,
- 0x00 };
-static const u8 wkp_calib_values_rx_iq[] = { 0xff, 0x00, 0x00, 0x00 };
static const u8 wkp_calib_values_rx_iq_skew[] = { 0x00, 0x00, 0x01, 0x00 };
static const u8 wkp_calib_values_tx_iq_skew[] = { 0x01, 0x00, 0x00, 0x00 };
-static const u8 wkp_calib_values_xtal[] = { 0xd2, 0xd2 };
struct iwl_calib_default_data {
u16 size;
#define CALIB_SIZE_N_DATA(_buf) {.size = sizeof(_buf), .data = &_buf}
static const struct iwl_calib_default_data wkp_calib_default_data[12] = {
- [5] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_dc),
- [6] = CALIB_SIZE_N_DATA(wkp_calib_values_bb_filter),
- [7] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_lo),
- [8] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq),
[9] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq_skew),
- [10] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq),
[11] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq_skew),
};
return 0;
}
-#define IWL_HW_REV_ID_RAINBOW 0x2
-#define IWL_PROJ_TYPE_LHP 0x5
-
-static u32 iwl_mvm_build_phy_cfg(struct iwl_mvm *mvm)
-{
- struct iwl_nvm_data *data = mvm->nvm_data;
- /* Temp calls to static definitions, will be changed to CSR calls */
- u8 hw_rev_id = IWL_HW_REV_ID_RAINBOW;
- u8 project_type = IWL_PROJ_TYPE_LHP;
-
- return data->radio_cfg_dash | (data->radio_cfg_step << 2) |
- (hw_rev_id << 4) | ((project_type & 0x7f) << 6) |
- (data->valid_tx_ant << 16) | (data->valid_rx_ant << 20);
-}
static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm)
{
enum iwl_ucode_type ucode_type = mvm->cur_ucode;
/* Set parameters */
- phy_cfg_cmd.phy_cfg = cpu_to_le32(iwl_mvm_build_phy_cfg(mvm));
+ phy_cfg_cmd.phy_cfg = cpu_to_le32(mvm->fw->phy_config);
phy_cfg_cmd.calib_control.event_trigger =
mvm->fw->default_calib[ucode_type].event_trigger;
phy_cfg_cmd.calib_control.flow_trigger =
sizeof(phy_cfg_cmd), &phy_cfg_cmd);
}
-/* Starting with the new PHY DB implementation - New calibs are enabled */
-/* Value - 0x405e7 */
-#define IWL_CALIB_DEFAULT_FLOW_INIT (IWL_CALIB_CFG_XTAL_IDX |\
- IWL_CALIB_CFG_TEMPERATURE_IDX |\
- IWL_CALIB_CFG_VOLTAGE_READ_IDX |\
- IWL_CALIB_CFG_DC_IDX |\
- IWL_CALIB_CFG_BB_FILTER_IDX |\
- IWL_CALIB_CFG_LO_LEAKAGE_IDX |\
- IWL_CALIB_CFG_TX_IQ_IDX |\
- IWL_CALIB_CFG_RX_IQ_IDX |\
- IWL_CALIB_CFG_AGC_IDX)
-
-#define IWL_CALIB_DEFAULT_EVENT_INIT 0x0
-
-/* Value 0x41567 */
-#define IWL_CALIB_DEFAULT_FLOW_RUN (IWL_CALIB_CFG_XTAL_IDX |\
- IWL_CALIB_CFG_TEMPERATURE_IDX |\
- IWL_CALIB_CFG_VOLTAGE_READ_IDX |\
- IWL_CALIB_CFG_BB_FILTER_IDX |\
- IWL_CALIB_CFG_DC_IDX |\
- IWL_CALIB_CFG_TX_IQ_IDX |\
- IWL_CALIB_CFG_RX_IQ_IDX |\
- IWL_CALIB_CFG_SENSITIVITY_IDX |\
- IWL_CALIB_CFG_AGC_IDX)
-
-#define IWL_CALIB_DEFAULT_EVENT_RUN (IWL_CALIB_CFG_XTAL_IDX |\
- IWL_CALIB_CFG_TEMPERATURE_IDX |\
- IWL_CALIB_CFG_VOLTAGE_READ_IDX |\
- IWL_CALIB_CFG_TX_PWR_IDX |\
- IWL_CALIB_CFG_DC_IDX |\
- IWL_CALIB_CFG_TX_IQ_IDX |\
- IWL_CALIB_CFG_SENSITIVITY_IDX)
-
-/*
- * Sets the calibrations trigger values that will be sent to the FW for runtime
- * and init calibrations.
- * The ones given in the FW TLV are not correct.
- */
-static void iwl_set_default_calib_trigger(struct iwl_mvm *mvm)
-{
- struct iwl_tlv_calib_ctrl default_calib;
-
- /*
- * WkP FW TLV calib bits are wrong, overwrite them.
- * This defines the dynamic calibrations which are implemented in the
- * uCode both for init(flow) calculation and event driven calibs.
- */
-
- /* Init Image */
- default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_INIT);
- default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_INIT);
-
- if (default_calib.event_trigger !=
- mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger)
- IWL_ERR(mvm,
- "Updating the event calib for INIT image: 0x%x -> 0x%x\n",
- mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger,
- default_calib.event_trigger);
- if (default_calib.flow_trigger !=
- mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger)
- IWL_ERR(mvm,
- "Updating the flow calib for INIT image: 0x%x -> 0x%x\n",
- mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger,
- default_calib.flow_trigger);
-
- memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_INIT],
- &default_calib, sizeof(struct iwl_tlv_calib_ctrl));
- IWL_ERR(mvm,
- "Setting uCode init calibrations event 0x%x, trigger 0x%x\n",
- default_calib.event_trigger,
- default_calib.flow_trigger);
-
- /* Run time image */
- default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_RUN);
- default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_RUN);
-
- if (default_calib.event_trigger !=
- mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger)
- IWL_ERR(mvm,
- "Updating the event calib for RT image: 0x%x -> 0x%x\n",
- mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger,
- default_calib.event_trigger);
- if (default_calib.flow_trigger !=
- mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger)
- IWL_ERR(mvm,
- "Updating the flow calib for RT image: 0x%x -> 0x%x\n",
- mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger,
- default_calib.flow_trigger);
-
- memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_REGULAR],
- &default_calib, sizeof(struct iwl_tlv_calib_ctrl));
- IWL_ERR(mvm,
- "Setting uCode runtime calibs event 0x%x, trigger 0x%x\n",
- default_calib.event_trigger,
- default_calib.flow_trigger);
-}
-
static int iwl_set_default_calibrations(struct iwl_mvm *mvm)
{
u8 cmd_raw[16]; /* holds the variable size commands */
ret = iwl_nvm_check_version(mvm->nvm_data, mvm->trans);
WARN_ON(ret);
- /* Override the calibrations from TLV and the const of fw */
- iwl_set_default_calib_trigger(mvm);
+ /* Send TX valid antennas before triggering calibrations */
+ ret = iwl_send_tx_ant_cfg(mvm, mvm->nvm_data->valid_tx_ant);
+ if (ret)
+ goto error;
/* WkP doesn't have all calibrations, need to set default values */
if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) {
#define IWL_INVALID_MAC80211_QUEUE 0xff
#define IWL_MVM_MAX_ADDRESSES 2
-#define IWL_RSSI_OFFSET 44
+/* RSSI offset for WkP */
+#define IWL_RSSI_OFFSET 50
enum iwl_mvm_tx_fifo {
IWL_MVM_TX_FIFO_BK = 0,
ieee80211_free_txskb(mvm->hw, skb);
}
-static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode)
+static void iwl_mvm_nic_restart(struct iwl_mvm *mvm)
{
- struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
-
- iwl_mvm_dump_nic_error_log(mvm);
-
iwl_abort_notification_waits(&mvm->notif_wait);
/*
}
}
+static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode)
+{
+ struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
+
+ iwl_mvm_dump_nic_error_log(mvm);
+
+ iwl_mvm_nic_restart(mvm);
+}
+
static void iwl_mvm_cmd_queue_full(struct iwl_op_mode *op_mode)
{
+ struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
+
WARN_ON(1);
+ iwl_mvm_nic_restart(mvm);
}
static const struct iwl_op_mode_ops iwl_mvm_ops = {
static int iwl_mvm_calc_rssi(struct iwl_mvm *mvm,
struct iwl_rx_phy_info *phy_info)
{
- u32 rssi_a, rssi_b, rssi_c, max_rssi, agc_db;
+ int rssi_a, rssi_b, rssi_a_dbm, rssi_b_dbm, max_rssi_dbm;
+ int rssi_all_band_a, rssi_all_band_b;
+ u32 agc_a, agc_b, max_agc;
u32 val;
- /* Find max rssi among 3 possible receivers.
+ /* Find max rssi among 2 possible receivers.
* These values are measured by the Digital Signal Processor (DSP).
* They should stay fairly constant even as the signal strength varies,
* if the radio's Automatic Gain Control (AGC) is working right.
* AGC value (see below) will provide the "interesting" info.
*/
+ val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]);
+ agc_a = (val & IWL_OFDM_AGC_A_MSK) >> IWL_OFDM_AGC_A_POS;
+ agc_b = (val & IWL_OFDM_AGC_B_MSK) >> IWL_OFDM_AGC_B_POS;
+ max_agc = max_t(u32, agc_a, agc_b);
+
val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_AB_IDX]);
rssi_a = (val & IWL_OFDM_RSSI_INBAND_A_MSK) >> IWL_OFDM_RSSI_A_POS;
rssi_b = (val & IWL_OFDM_RSSI_INBAND_B_MSK) >> IWL_OFDM_RSSI_B_POS;
- val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_C_IDX]);
- rssi_c = (val & IWL_OFDM_RSSI_INBAND_C_MSK) >> IWL_OFDM_RSSI_C_POS;
-
- val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]);
- agc_db = (val & IWL_OFDM_AGC_DB_MSK) >> IWL_OFDM_AGC_DB_POS;
+ rssi_all_band_a = (val & IWL_OFDM_RSSI_ALLBAND_A_MSK) >>
+ IWL_OFDM_RSSI_ALLBAND_A_POS;
+ rssi_all_band_b = (val & IWL_OFDM_RSSI_ALLBAND_B_MSK) >>
+ IWL_OFDM_RSSI_ALLBAND_B_POS;
- max_rssi = max_t(u32, rssi_a, rssi_b);
- max_rssi = max_t(u32, max_rssi, rssi_c);
+ /*
+ * dBm = rssi dB - agc dB - constant.
+ * Higher AGC (higher radio gain) means lower signal.
+ */
+ rssi_a_dbm = rssi_a - IWL_RSSI_OFFSET - agc_a;
+ rssi_b_dbm = rssi_b - IWL_RSSI_OFFSET - agc_b;
+ max_rssi_dbm = max_t(int, rssi_a_dbm, rssi_b_dbm);
- IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d C %d Max %d AGC dB %d\n",
- rssi_a, rssi_b, rssi_c, max_rssi, agc_db);
+ IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d Max %d AGCA %d AGCB %d\n",
+ rssi_a_dbm, rssi_b_dbm, max_rssi_dbm, agc_a, agc_b);
- /* dBm = max_rssi dB - agc dB - constant.
- * Higher AGC (higher radio gain) means lower signal. */
- return max_rssi - agc_db - IWL_RSSI_OFFSET;
+ return max_rssi_dbm;
}
/*
u16 txq_id;
int err;
+
+ /*
+ * If mac80211 is cleaning its state, then say that we finished since
+ * our state has been cleared anyway.
+ */
+ if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) {
+ ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ return 0;
+ }
+
spin_lock_bh(&mvmsta->lock);
txq_id = tid_data->txq_id;
/* Single frame failure in an AMPDU queue => send BAR */
if (txq_id >= IWL_FIRST_AMPDU_QUEUE &&
- !(info->flags & IEEE80211_TX_STAT_ACK)) {
- /* there must be only one skb in the skb_list */
- WARN_ON_ONCE(skb_freed > 1 ||
- !skb_queue_empty(&skbs));
+ !(info->flags & IEEE80211_TX_STAT_ACK))
info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
- }
/* W/A FW bug: seq_ctl is wrong when the queue is flushed */
if (status == TX_STATUS_FAIL_FIFO_FLUSHED) {
struct iwl_cmd_meta {
/* only for SYNC commands, iff the reply skb is wanted */
struct iwl_host_cmd *source;
-
- DEFINE_DMA_UNMAP_ADDR(mapping);
- DEFINE_DMA_UNMAP_LEN(len);
-
u32 flags;
};
/*
* The FH will write back to the first TB only, so we need
* to copy some data into the buffer regardless of whether
- * it should be mapped or not. This indicates how much to
- * copy, even for HCMDs it must be big enough to fit the
- * DRAM scratch from the TX cmd, at least 16 bytes.
+ * it should be mapped or not. This indicates how big the
+ * first TB must be to include the scratch buffer. Since
+ * the scratch is 4 bytes at offset 12, it's 16 now. If we
+ * make it bigger then allocations will be bigger and copy
+ * slower, so that's probably not useful.
*/
-#define IWL_HCMD_MIN_COPY_SIZE 16
+#define IWL_HCMD_SCRATCHBUF_SIZE 16
struct iwl_pcie_txq_entry {
struct iwl_device_cmd *cmd;
- struct iwl_device_cmd *copy_cmd;
struct sk_buff *skb;
/* buffer to free after command completes */
const void *free_buf;
struct iwl_cmd_meta meta;
};
+struct iwl_pcie_txq_scratch_buf {
+ struct iwl_cmd_header hdr;
+ u8 buf[8];
+ __le32 scratch;
+};
+
/**
* struct iwl_txq - Tx Queue for DMA
* @q: generic Rx/Tx queue descriptor
* @tfds: transmit frame descriptors (DMA memory)
+ * @scratchbufs: start of command headers, including scratch buffers, for
+ * the writeback -- this is DMA memory and an array holding one buffer
+ * for each command on the queue
+ * @scratchbufs_dma: DMA address for the scratchbufs start
* @entries: transmit entries (driver state)
* @lock: queue lock
* @stuck_timer: timer that fires if queue gets stuck
struct iwl_txq {
struct iwl_queue q;
struct iwl_tfd *tfds;
+ struct iwl_pcie_txq_scratch_buf *scratchbufs;
+ dma_addr_t scratchbufs_dma;
struct iwl_pcie_txq_entry *entries;
spinlock_t lock;
struct timer_list stuck_timer;
u8 active;
};
+static inline dma_addr_t
+iwl_pcie_get_scratchbuf_dma(struct iwl_txq *txq, int idx)
+{
+ return txq->scratchbufs_dma +
+ sizeof(struct iwl_pcie_txq_scratch_buf) * idx;
+}
+
/**
* struct iwl_trans_pcie - PCIe transport specific data
* @rxq: all the RX queue data
index = SEQ_TO_INDEX(sequence);
cmd_index = get_cmd_index(&txq->q, index);
- if (reclaim) {
- struct iwl_pcie_txq_entry *ent;
- ent = &txq->entries[cmd_index];
- cmd = ent->copy_cmd;
- WARN_ON_ONCE(!cmd && ent->meta.flags & CMD_WANT_HCMD);
- } else {
+ if (reclaim)
+ cmd = txq->entries[cmd_index].cmd;
+ else
cmd = NULL;
- }
err = iwl_op_mode_rx(trans->op_mode, &rxcb, cmd);
if (reclaim) {
- /* The original command isn't needed any more */
- kfree(txq->entries[cmd_index].copy_cmd);
- txq->entries[cmd_index].copy_cmd = NULL;
- /* nor is the duplicated part of the command */
kfree(txq->entries[cmd_index].free_buf);
txq->entries[cmd_index].free_buf = NULL;
}
/* If platform's RF_KILL switch is NOT set to KILL */
hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans_pcie->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans_pcie->status);
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
if (hw_rfkill && !run_in_rfkill)
return -ERFKILL;
static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
{
+ struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
bool hw_rfkill;
int err;
iwl_enable_rfkill_int(trans);
hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans_pcie->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans_pcie->status);
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
return 0;
* op_mode.
*/
hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans_pcie->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans_pcie->status);
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
}
}
}
for (i = q->read_ptr; i != q->write_ptr;
- i = iwl_queue_inc_wrap(i, q->n_bd)) {
- struct iwl_tx_cmd *tx_cmd =
- (struct iwl_tx_cmd *)txq->entries[i].cmd->payload;
+ i = iwl_queue_inc_wrap(i, q->n_bd))
IWL_ERR(trans, "scratch %d = 0x%08x\n", i,
- get_unaligned_le32(&tx_cmd->scratch));
- }
+ le32_to_cpu(txq->scratchbufs[i].scratch));
iwl_op_mode_nic_error(trans->op_mode);
}
}
static void iwl_pcie_tfd_unmap(struct iwl_trans *trans,
- struct iwl_cmd_meta *meta, struct iwl_tfd *tfd,
- enum dma_data_direction dma_dir)
+ struct iwl_cmd_meta *meta,
+ struct iwl_tfd *tfd)
{
int i;
int num_tbs;
return;
}
- /* Unmap tx_cmd */
- if (num_tbs)
- dma_unmap_single(trans->dev,
- dma_unmap_addr(meta, mapping),
- dma_unmap_len(meta, len),
- DMA_BIDIRECTIONAL);
+ /* first TB is never freed - it's the scratchbuf data */
- /* Unmap chunks, if any. */
for (i = 1; i < num_tbs; i++)
dma_unmap_single(trans->dev, iwl_pcie_tfd_tb_get_addr(tfd, i),
- iwl_pcie_tfd_tb_get_len(tfd, i), dma_dir);
+ iwl_pcie_tfd_tb_get_len(tfd, i),
+ DMA_TO_DEVICE);
tfd->num_tbs = 0;
}
* Does NOT advance any TFD circular buffer read/write indexes
* Does NOT free the TFD itself (which is within circular buffer)
*/
-static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq,
- enum dma_data_direction dma_dir)
+static void iwl_pcie_txq_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq)
{
struct iwl_tfd *tfd_tmp = txq->tfds;
lockdep_assert_held(&txq->lock);
/* We have only q->n_window txq->entries, but we use q->n_bd tfds */
- iwl_pcie_tfd_unmap(trans, &txq->entries[idx].meta, &tfd_tmp[rd_ptr],
- dma_dir);
+ iwl_pcie_tfd_unmap(trans, &txq->entries[idx].meta, &tfd_tmp[rd_ptr]);
/* free SKB */
if (txq->entries) {
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
size_t tfd_sz = sizeof(struct iwl_tfd) * TFD_QUEUE_SIZE_MAX;
+ size_t scratchbuf_sz;
int i;
if (WARN_ON(txq->entries || txq->tfds))
IWL_ERR(trans, "dma_alloc_coherent(%zd) failed\n", tfd_sz);
goto error;
}
+
+ BUILD_BUG_ON(IWL_HCMD_SCRATCHBUF_SIZE != sizeof(*txq->scratchbufs));
+ BUILD_BUG_ON(offsetof(struct iwl_pcie_txq_scratch_buf, scratch) !=
+ sizeof(struct iwl_cmd_header) +
+ offsetof(struct iwl_tx_cmd, scratch));
+
+ scratchbuf_sz = sizeof(*txq->scratchbufs) * slots_num;
+
+ txq->scratchbufs = dma_alloc_coherent(trans->dev, scratchbuf_sz,
+ &txq->scratchbufs_dma,
+ GFP_KERNEL);
+ if (!txq->scratchbufs)
+ goto err_free_tfds;
+
txq->q.id = txq_id;
return 0;
+err_free_tfds:
+ dma_free_coherent(trans->dev, tfd_sz, txq->tfds, txq->q.dma_addr);
error:
if (txq->entries && txq_id == trans_pcie->cmd_queue)
for (i = 0; i < slots_num; i++)
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
struct iwl_txq *txq = &trans_pcie->txq[txq_id];
struct iwl_queue *q = &txq->q;
- enum dma_data_direction dma_dir;
if (!q->n_bd)
return;
- /* In the command queue, all the TBs are mapped as BIDI
- * so unmap them as such.
- */
- if (txq_id == trans_pcie->cmd_queue)
- dma_dir = DMA_BIDIRECTIONAL;
- else
- dma_dir = DMA_TO_DEVICE;
-
spin_lock_bh(&txq->lock);
while (q->write_ptr != q->read_ptr) {
- iwl_pcie_txq_free_tfd(trans, txq, dma_dir);
+ iwl_pcie_txq_free_tfd(trans, txq);
q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd);
}
spin_unlock_bh(&txq->lock);
if (txq_id == trans_pcie->cmd_queue)
for (i = 0; i < txq->q.n_window; i++) {
kfree(txq->entries[i].cmd);
- kfree(txq->entries[i].copy_cmd);
kfree(txq->entries[i].free_buf);
}
dma_free_coherent(dev, sizeof(struct iwl_tfd) *
txq->q.n_bd, txq->tfds, txq->q.dma_addr);
txq->q.dma_addr = 0;
+
+ dma_free_coherent(dev,
+ sizeof(*txq->scratchbufs) * txq->q.n_window,
+ txq->scratchbufs, txq->scratchbufs_dma);
}
kfree(txq->entries);
iwl_pcie_txq_inval_byte_cnt_tbl(trans, txq);
- iwl_pcie_txq_free_tfd(trans, txq, DMA_TO_DEVICE);
+ iwl_pcie_txq_free_tfd(trans, txq);
}
iwl_pcie_txq_progress(trans_pcie, txq);
void *dup_buf = NULL;
dma_addr_t phys_addr;
int idx;
- u16 copy_size, cmd_size, dma_size;
+ u16 copy_size, cmd_size, scratch_size;
bool had_nocopy = false;
int i;
u32 cmd_pos;
- const u8 *cmddata[IWL_MAX_CMD_TFDS];
- u16 cmdlen[IWL_MAX_CMD_TFDS];
+ const u8 *cmddata[IWL_MAX_CMD_TBS_PER_TFD];
+ u16 cmdlen[IWL_MAX_CMD_TBS_PER_TFD];
copy_size = sizeof(out_cmd->hdr);
cmd_size = sizeof(out_cmd->hdr);
/* need one for the header if the first is NOCOPY */
- BUILD_BUG_ON(IWL_MAX_CMD_TFDS > IWL_NUM_OF_TBS - 1);
+ BUILD_BUG_ON(IWL_MAX_CMD_TBS_PER_TFD > IWL_NUM_OF_TBS - 1);
- for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
+ for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
cmddata[i] = cmd->data[i];
cmdlen[i] = cmd->len[i];
if (!cmd->len[i])
continue;
- /* need at least IWL_HCMD_MIN_COPY_SIZE copied */
- if (copy_size < IWL_HCMD_MIN_COPY_SIZE) {
- int copy = IWL_HCMD_MIN_COPY_SIZE - copy_size;
+ /* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */
+ if (copy_size < IWL_HCMD_SCRATCHBUF_SIZE) {
+ int copy = IWL_HCMD_SCRATCHBUF_SIZE - copy_size;
if (copy > cmdlen[i])
copy = cmdlen[i];
/* and copy the data that needs to be copied */
cmd_pos = offsetof(struct iwl_device_cmd, payload);
copy_size = sizeof(out_cmd->hdr);
- for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
+ for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
int copy = 0;
- if (!cmd->len)
+ if (!cmd->len[i])
continue;
- /* need at least IWL_HCMD_MIN_COPY_SIZE copied */
- if (copy_size < IWL_HCMD_MIN_COPY_SIZE) {
- copy = IWL_HCMD_MIN_COPY_SIZE - copy_size;
+ /* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */
+ if (copy_size < IWL_HCMD_SCRATCHBUF_SIZE) {
+ copy = IWL_HCMD_SCRATCHBUF_SIZE - copy_size;
if (copy > cmd->len[i])
copy = cmd->len[i];
}
}
- WARN_ON_ONCE(txq->entries[idx].copy_cmd);
-
- /*
- * since out_cmd will be the source address of the FH, it will write
- * the retry count there. So when the user needs to receivce the HCMD
- * that corresponds to the response in the response handler, it needs
- * to set CMD_WANT_HCMD.
- */
- if (cmd->flags & CMD_WANT_HCMD) {
- txq->entries[idx].copy_cmd =
- kmemdup(out_cmd, cmd_pos, GFP_ATOMIC);
- if (unlikely(!txq->entries[idx].copy_cmd)) {
- idx = -ENOMEM;
- goto out;
- }
- }
-
IWL_DEBUG_HC(trans,
"Sending command %s (#%x), seq: 0x%04X, %d bytes at %d[%d]:%d\n",
get_cmd_string(trans_pcie, out_cmd->hdr.cmd),
out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence),
cmd_size, q->write_ptr, idx, trans_pcie->cmd_queue);
- /*
- * If the entire command is smaller than IWL_HCMD_MIN_COPY_SIZE, we must
- * still map at least that many bytes for the hardware to write back to.
- * We have enough space, so that's not a problem.
- */
- dma_size = max_t(u16, copy_size, IWL_HCMD_MIN_COPY_SIZE);
+ /* start the TFD with the scratchbuf */
+ scratch_size = min_t(int, copy_size, IWL_HCMD_SCRATCHBUF_SIZE);
+ memcpy(&txq->scratchbufs[q->write_ptr], &out_cmd->hdr, scratch_size);
+ iwl_pcie_txq_build_tfd(trans, txq,
+ iwl_pcie_get_scratchbuf_dma(txq, q->write_ptr),
+ scratch_size, 1);
+
+ /* map first command fragment, if any remains */
+ if (copy_size > scratch_size) {
+ phys_addr = dma_map_single(trans->dev,
+ ((u8 *)&out_cmd->hdr) + scratch_size,
+ copy_size - scratch_size,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(trans->dev, phys_addr)) {
+ iwl_pcie_tfd_unmap(trans, out_meta,
+ &txq->tfds[q->write_ptr]);
+ idx = -ENOMEM;
+ goto out;
+ }
- phys_addr = dma_map_single(trans->dev, &out_cmd->hdr, dma_size,
- DMA_BIDIRECTIONAL);
- if (unlikely(dma_mapping_error(trans->dev, phys_addr))) {
- idx = -ENOMEM;
- goto out;
+ iwl_pcie_txq_build_tfd(trans, txq, phys_addr,
+ copy_size - scratch_size, 0);
}
- dma_unmap_addr_set(out_meta, mapping, phys_addr);
- dma_unmap_len_set(out_meta, len, dma_size);
-
- iwl_pcie_txq_build_tfd(trans, txq, phys_addr, copy_size, 1);
-
/* map the remaining (adjusted) nocopy/dup fragments */
- for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
+ for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
const void *data = cmddata[i];
if (!cmdlen[i])
if (cmd->dataflags[i] & IWL_HCMD_DFL_DUP)
data = dup_buf;
phys_addr = dma_map_single(trans->dev, (void *)data,
- cmdlen[i], DMA_BIDIRECTIONAL);
+ cmdlen[i], DMA_TO_DEVICE);
if (dma_mapping_error(trans->dev, phys_addr)) {
iwl_pcie_tfd_unmap(trans, out_meta,
- &txq->tfds[q->write_ptr],
- DMA_BIDIRECTIONAL);
+ &txq->tfds[q->write_ptr]);
idx = -ENOMEM;
goto out;
}
cmd = txq->entries[cmd_index].cmd;
meta = &txq->entries[cmd_index].meta;
- iwl_pcie_tfd_unmap(trans, meta, &txq->tfds[index], DMA_BIDIRECTIONAL);
+ iwl_pcie_tfd_unmap(trans, meta, &txq->tfds[index]);
/* Input error checking is done when commands are added to queue. */
if (meta->flags & CMD_WANT_SKB) {
struct iwl_cmd_meta *out_meta;
struct iwl_txq *txq;
struct iwl_queue *q;
- dma_addr_t phys_addr = 0;
- dma_addr_t txcmd_phys;
- dma_addr_t scratch_phys;
- u16 len, firstlen, secondlen;
+ dma_addr_t tb0_phys, tb1_phys, scratch_phys;
+ void *tb1_addr;
+ u16 len, tb1_len, tb2_len;
u8 wait_write_ptr = 0;
__le16 fc = hdr->frame_control;
u8 hdr_len = ieee80211_hdrlen(fc);
cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
INDEX_TO_SEQ(q->write_ptr)));
+ tb0_phys = iwl_pcie_get_scratchbuf_dma(txq, q->write_ptr);
+ scratch_phys = tb0_phys + sizeof(struct iwl_cmd_header) +
+ offsetof(struct iwl_tx_cmd, scratch);
+
+ tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
+ tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
+
/* Set up first empty entry in queue's array of Tx/cmd buffers */
out_meta = &txq->entries[q->write_ptr].meta;
/*
- * Use the first empty entry in this queue's command buffer array
- * to contain the Tx command and MAC header concatenated together
- * (payload data will be in another buffer).
- * Size of this varies, due to varying MAC header length.
- * If end is not dword aligned, we'll have 2 extra bytes at the end
- * of the MAC header (device reads on dword boundaries).
- * We'll tell device about this padding later.
+ * The second TB (tb1) points to the remainder of the TX command
+ * and the 802.11 header - dword aligned size
+ * (This calculation modifies the TX command, so do it before the
+ * setup of the first TB)
*/
- len = sizeof(struct iwl_tx_cmd) +
- sizeof(struct iwl_cmd_header) + hdr_len;
- firstlen = (len + 3) & ~3;
+ len = sizeof(struct iwl_tx_cmd) + sizeof(struct iwl_cmd_header) +
+ hdr_len - IWL_HCMD_SCRATCHBUF_SIZE;
+ tb1_len = (len + 3) & ~3;
/* Tell NIC about any 2-byte padding after MAC header */
- if (firstlen != len)
+ if (tb1_len != len)
tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
- /* Physical address of this Tx command's header (not MAC header!),
- * within command buffer array. */
- txcmd_phys = dma_map_single(trans->dev,
- &dev_cmd->hdr, firstlen,
- DMA_BIDIRECTIONAL);
- if (unlikely(dma_mapping_error(trans->dev, txcmd_phys)))
- goto out_err;
- dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
- dma_unmap_len_set(out_meta, len, firstlen);
+ /* The first TB points to the scratchbuf data - min_copy bytes */
+ memcpy(&txq->scratchbufs[q->write_ptr], &dev_cmd->hdr,
+ IWL_HCMD_SCRATCHBUF_SIZE);
+ iwl_pcie_txq_build_tfd(trans, txq, tb0_phys,
+ IWL_HCMD_SCRATCHBUF_SIZE, 1);
- if (!ieee80211_has_morefrags(fc)) {
- txq->need_update = 1;
- } else {
- wait_write_ptr = 1;
- txq->need_update = 0;
- }
+ /* there must be data left over for TB1 or this code must be changed */
+ BUILD_BUG_ON(sizeof(struct iwl_tx_cmd) < IWL_HCMD_SCRATCHBUF_SIZE);
- /* Set up TFD's 2nd entry to point directly to remainder of skb,
- * if any (802.11 null frames have no payload). */
- secondlen = skb->len - hdr_len;
- if (secondlen > 0) {
- phys_addr = dma_map_single(trans->dev, skb->data + hdr_len,
- secondlen, DMA_TO_DEVICE);
- if (unlikely(dma_mapping_error(trans->dev, phys_addr))) {
- dma_unmap_single(trans->dev,
- dma_unmap_addr(out_meta, mapping),
- dma_unmap_len(out_meta, len),
- DMA_BIDIRECTIONAL);
+ /* map the data for TB1 */
+ tb1_addr = ((u8 *)&dev_cmd->hdr) + IWL_HCMD_SCRATCHBUF_SIZE;
+ tb1_phys = dma_map_single(trans->dev, tb1_addr, tb1_len, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(trans->dev, tb1_phys)))
+ goto out_err;
+ iwl_pcie_txq_build_tfd(trans, txq, tb1_phys, tb1_len, 0);
+
+ /*
+ * Set up TFD's third entry to point directly to remainder
+ * of skb, if any (802.11 null frames have no payload).
+ */
+ tb2_len = skb->len - hdr_len;
+ if (tb2_len > 0) {
+ dma_addr_t tb2_phys = dma_map_single(trans->dev,
+ skb->data + hdr_len,
+ tb2_len, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(trans->dev, tb2_phys))) {
+ iwl_pcie_tfd_unmap(trans, out_meta,
+ &txq->tfds[q->write_ptr]);
goto out_err;
}
+ iwl_pcie_txq_build_tfd(trans, txq, tb2_phys, tb2_len, 0);
}
- /* Attach buffers to TFD */
- iwl_pcie_txq_build_tfd(trans, txq, txcmd_phys, firstlen, 1);
- if (secondlen > 0)
- iwl_pcie_txq_build_tfd(trans, txq, phys_addr, secondlen, 0);
-
- scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) +
- offsetof(struct iwl_tx_cmd, scratch);
-
- /* take back ownership of DMA buffer to enable update */
- dma_sync_single_for_cpu(trans->dev, txcmd_phys, firstlen,
- DMA_BIDIRECTIONAL);
- tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
- tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
-
/* Set up entry for this TFD in Tx byte-count array */
iwl_pcie_txq_update_byte_cnt_tbl(trans, txq, le16_to_cpu(tx_cmd->len));
- dma_sync_single_for_device(trans->dev, txcmd_phys, firstlen,
- DMA_BIDIRECTIONAL);
-
trace_iwlwifi_dev_tx(trans->dev, skb,
&txq->tfds[txq->q.write_ptr],
sizeof(struct iwl_tfd),
- &dev_cmd->hdr, firstlen,
- skb->data + hdr_len, secondlen);
+ &dev_cmd->hdr, IWL_HCMD_SCRATCHBUF_SIZE + tb1_len,
+ skb->data + hdr_len, tb2_len);
trace_iwlwifi_dev_tx_data(trans->dev, skb,
- skb->data + hdr_len, secondlen);
+ skb->data + hdr_len, tb2_len);
+
+ if (!ieee80211_has_morefrags(fc)) {
+ txq->need_update = 1;
+ } else {
+ wait_write_ptr = 1;
+ txq->need_update = 0;
+ }
/* start timer if queue currently empty */
if (txq->need_update && q->read_ptr == q->write_ptr &&
}
}
- for (i = 0; i < request->n_channels; i++) {
+ for (i = 0; i < min_t(u32, request->n_channels,
+ MWIFIEX_USER_SCAN_CHAN_MAX); i++) {
chan = request->channels[i];
priv->user_scan_cfg->chan_list[i].chan_number = chan->hw_value;
priv->user_scan_cfg->chan_list[i].radio_type = chan->band;
return -1;
}
+ cmd_code = le16_to_cpu(host_cmd->command);
+ cmd_size = le16_to_cpu(host_cmd->size);
+
+ if (adapter->hw_status == MWIFIEX_HW_STATUS_RESET &&
+ cmd_code != HostCmd_CMD_FUNC_SHUTDOWN &&
+ cmd_code != HostCmd_CMD_FUNC_INIT) {
+ dev_err(adapter->dev,
+ "DNLD_CMD: FW in reset state, ignore cmd %#x\n",
+ cmd_code);
+ mwifiex_complete_cmd(adapter, cmd_node);
+ mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+ return -1;
+ }
+
/* Set command sequence number */
adapter->seq_num++;
host_cmd->seq_num = cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO
adapter->curr_cmd = cmd_node;
spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
- cmd_code = le16_to_cpu(host_cmd->command);
- cmd_size = le16_to_cpu(host_cmd->size);
-
/* Adjust skb length */
if (cmd_node->cmd_skb->len > cmd_size)
/*
ret = mwifiex_send_cmd_async(priv, cmd_no, cmd_action, cmd_oid,
data_buf);
- if (!ret)
- ret = mwifiex_wait_queue_complete(adapter);
return ret;
}
if (cmd_no == HostCmd_CMD_802_11_SCAN) {
mwifiex_queue_scan_cmd(priv, cmd_node);
} else {
- adapter->cmd_queued = cmd_node;
mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, true);
queue_work(adapter->workqueue, &adapter->main_work);
+ if (cmd_node->wait_q_enabled)
+ ret = mwifiex_wait_queue_complete(adapter, cmd_node);
}
return ret;
return ret;
}
+ /* cancel current command */
+ if (adapter->curr_cmd) {
+ dev_warn(adapter->dev, "curr_cmd is still in processing\n");
+ del_timer(&adapter->cmd_timer);
+ mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd);
+ adapter->curr_cmd = NULL;
+ }
+
/* shut down mwifiex */
dev_dbg(adapter->dev, "info: shutdown mwifiex...\n");
adhoc_join->bss_descriptor.bssid,
adhoc_join->bss_descriptor.ssid);
- for (i = 0; bss_desc->supported_rates[i] &&
- i < MWIFIEX_SUPPORTED_RATES;
- i++)
- ;
+ for (i = 0; i < MWIFIEX_SUPPORTED_RATES &&
+ bss_desc->supported_rates[i]; i++)
+ ;
rates_size = i;
/* Copy Data Rates from the Rates recorded in scan response */
u16 cmd_wait_q_required;
struct mwifiex_wait_queue cmd_wait_q;
u8 scan_wait_q_woken;
- struct cmd_ctrl_node *cmd_queued;
spinlock_t queue_lock; /* lock for tx queues */
struct completion fw_load;
u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
struct mwifiex_multicast_list *mcast_list);
int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist,
struct net_device *dev);
-int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter);
+int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter,
+ struct cmd_ctrl_node *cmd_queued);
int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
struct cfg80211_ssid *req_ssid);
int mwifiex_cancel_hs(struct mwifiex_private *priv, int cmd_type);
}
memcpy(adapter->upld_buf, skb->data,
min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len));
+ skb_push(skb, INTF_HEADER_LEN);
if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE,
PCI_DMA_FROMDEVICE))
return -1;
list_del(&cmd_node->list);
spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
flags);
- adapter->cmd_queued = cmd_node;
mwifiex_insert_cmd_to_pending_q(adapter, cmd_node,
true);
queue_work(adapter->workqueue, &adapter->main_work);
+
+ /* Perform internal scan synchronously */
+ if (!priv->scan_request)
+ mwifiex_wait_queue_complete(adapter, cmd_node);
} else {
spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
flags);
/* Normal scan */
ret = mwifiex_scan_networks(priv, NULL);
- if (!ret)
- ret = mwifiex_wait_queue_complete(priv->adapter);
-
up(&priv->async_sem);
return ret;
* This function waits on a cmd wait queue. It also cancels the pending
* request after waking up, in case of errors.
*/
-int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter)
+int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter,
+ struct cmd_ctrl_node *cmd_queued)
{
int status;
- struct cmd_ctrl_node *cmd_queued;
-
- if (!adapter->cmd_queued)
- return 0;
-
- cmd_queued = adapter->cmd_queued;
- adapter->cmd_queued = NULL;
dev_dbg(adapter->dev, "cmd pending\n");
atomic_inc(&adapter->cmd_pending);
config RT2800PCI
tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support"
- depends on PCI || RALINK_RT288X || RALINK_RT305X
+ depends on PCI || SOC_RT288X || SOC_RT305X
select RT2800_LIB
select RT2X00_LIB_PCI if PCI
- select RT2X00_LIB_SOC if RALINK_RT288X || RALINK_RT305X
+ select RT2X00_LIB_SOC if SOC_RT288X || SOC_RT305X
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_CCITT
rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
}
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
static int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
{
void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
{
return -ENOMEM;
}
-#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
+#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */
#ifdef CONFIG_PCI
static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
#endif /* CONFIG_PCI */
MODULE_LICENSE("GPL");
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
static int rt2800soc_probe(struct platform_device *pdev)
{
return rt2x00soc_probe(pdev, &rt2800pci_ops);
.suspend = rt2x00soc_suspend,
.resume = rt2x00soc_resume,
};
-#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
+#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */
#ifdef CONFIG_PCI
static int rt2800pci_probe(struct pci_dev *pci_dev,
{
int ret = 0;
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
ret = platform_driver_register(&rt2800soc_driver);
if (ret)
return ret;
#ifdef CONFIG_PCI
ret = pci_register_driver(&rt2800pci_driver);
if (ret) {
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
platform_driver_unregister(&rt2800soc_driver);
#endif
return ret;
#ifdef CONFIG_PCI
pci_unregister_driver(&rt2800pci_driver);
#endif
-#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
+#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
platform_driver_unregister(&rt2800soc_driver);
#endif
}
}
void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
-{
- /* dummy routine needed for callback from rtl_op_configure_filter() */
-}
-
-/*========================================================================== */
-
-static void _rtl92cu_set_check_bssid(struct ieee80211_hw *hw,
- enum nl80211_iftype type)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
- u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR);
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
- struct rtl_phy *rtlphy = &(rtlpriv->phy);
- u8 filterout_non_associated_bssid = false;
+ u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR);
- switch (type) {
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_STATION:
- filterout_non_associated_bssid = true;
- break;
- case NL80211_IFTYPE_UNSPECIFIED:
- case NL80211_IFTYPE_AP:
- default:
- break;
- }
- if (filterout_non_associated_bssid) {
+ if (rtlpriv->psc.rfpwr_state != ERFON)
+ return;
+
+ if (check_bssid) {
+ u8 tmp;
if (IS_NORMAL_CHIP(rtlhal->version)) {
- switch (rtlphy->current_io_type) {
- case IO_CMD_RESUME_DM_BY_SCAN:
- reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
- rtlpriv->cfg->ops->set_hw_reg(hw,
- HW_VAR_RCR, (u8 *)(®_rcr));
- /* enable update TSF */
- _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4));
- break;
- case IO_CMD_PAUSE_DM_BY_SCAN:
- reg_rcr &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN);
- rtlpriv->cfg->ops->set_hw_reg(hw,
- HW_VAR_RCR, (u8 *)(®_rcr));
- /* disable update TSF */
- _rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0);
- break;
- }
+ reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
+ tmp = BIT(4);
} else {
- reg_rcr |= (RCR_CBSSID);
- rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
- (u8 *)(®_rcr));
- _rtl92cu_set_bcn_ctrl_reg(hw, 0, (BIT(4)|BIT(5)));
+ reg_rcr |= RCR_CBSSID;
+ tmp = BIT(4) | BIT(5);
}
- } else if (filterout_non_associated_bssid == false) {
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
+ (u8 *) (®_rcr));
+ _rtl92cu_set_bcn_ctrl_reg(hw, 0, tmp);
+ } else {
+ u8 tmp;
if (IS_NORMAL_CHIP(rtlhal->version)) {
- reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
- rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
- (u8 *)(®_rcr));
- _rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0);
+ reg_rcr &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN);
+ tmp = BIT(4);
} else {
- reg_rcr &= (~RCR_CBSSID);
- rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
- (u8 *)(®_rcr));
- _rtl92cu_set_bcn_ctrl_reg(hw, (BIT(4)|BIT(5)), 0);
+ reg_rcr &= ~RCR_CBSSID;
+ tmp = BIT(4) | BIT(5);
}
+ reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_RCR, (u8 *) (®_rcr));
+ _rtl92cu_set_bcn_ctrl_reg(hw, tmp, 0);
}
}
+/*========================================================================== */
+
int rtl92cu_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
if (_rtl92cu_set_media_status(hw, type))
return -EOPNOTSUPP;
- _rtl92cu_set_check_bssid(hw, type);
+
+ if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
+ if (type != NL80211_IFTYPE_AP)
+ rtl92cu_set_check_bssid(hw, true);
+ } else {
+ rtl92cu_set_check_bssid(hw, false);
+ }
+
return 0;
}
(shortgi_rate << 4) | (shortgi_rate);
}
rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
- RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n",
- rtl_read_dword(rtlpriv, REG_ARFR0));
}
void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
if (unlikely(!_urb)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Can't allocate urb. Drop skb!\n");
+ kfree_skb(skb);
return;
}
_rtl_submit_tx_urb(hw, _urb);
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
-#include <linux/mei_bus.h>
+#include <linux/mei_cl_bus.h>
#include <linux/nfc.h>
#include <net/nfc/hci.h>
#define MICROREAD_DRIVER_NAME "microread"
-#define MICROREAD_UUID UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, 0x94, \
- 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c)
-
struct mei_nfc_hdr {
u8 cmd;
u8 status;
#define MEI_NFC_MAX_READ (MEI_NFC_HEADER_SIZE + MEI_NFC_MAX_HCI_PAYLOAD)
struct microread_mei_phy {
- struct mei_device *mei_device;
+ struct mei_cl_device *device;
struct nfc_hci_dev *hdev;
int powered;
MEI_DUMP_SKB_OUT("mei frame sent", skb);
- r = mei_send(phy->device, skb->data, skb->len);
+ r = mei_cl_send(phy->device, skb->data, skb->len);
if (r > 0)
r = 0;
return r;
}
-static void microread_event_cb(struct mei_device *device, u32 events,
+static void microread_event_cb(struct mei_cl_device *device, u32 events,
void *context)
{
struct microread_mei_phy *phy = context;
if (phy->hard_fault != 0)
return;
- if (events & BIT(MEI_EVENT_RX)) {
+ if (events & BIT(MEI_CL_EVENT_RX)) {
struct sk_buff *skb;
int reply_size;
if (!skb)
return;
- reply_size = mei_recv(device, skb->data, MEI_NFC_MAX_READ);
+ reply_size = mei_cl_recv(device, skb->data, MEI_NFC_MAX_READ);
if (reply_size < MEI_NFC_HEADER_SIZE) {
kfree(skb);
return;
.disable = microread_mei_disable,
};
-static int microread_mei_probe(struct mei_device *device,
- const struct mei_id *id)
+static int microread_mei_probe(struct mei_cl_device *device,
+ const struct mei_cl_device_id *id)
{
struct microread_mei_phy *phy;
int r;
}
phy->device = device;
- mei_set_clientdata(device, phy);
+ mei_cl_set_drvdata(device, phy);
- r = mei_register_event_cb(device, microread_event_cb, phy);
+ r = mei_cl_register_event_cb(device, microread_event_cb, phy);
if (r) {
pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n");
goto err_out;
return r;
}
-static int microread_mei_remove(struct mei_device *device)
+static int microread_mei_remove(struct mei_cl_device *device)
{
- struct microread_mei_phy *phy = mei_get_clientdata(device);
+ struct microread_mei_phy *phy = mei_cl_get_drvdata(device);
pr_info("Removing microread\n");
return 0;
}
-static struct mei_id microread_mei_tbl[] = {
- { MICROREAD_DRIVER_NAME, MICROREAD_UUID },
+static struct mei_cl_device_id microread_mei_tbl[] = {
+ { MICROREAD_DRIVER_NAME },
/* required last entry */
{ }
};
-
MODULE_DEVICE_TABLE(mei, microread_mei_tbl);
-static struct mei_driver microread_driver = {
+static struct mei_cl_driver microread_driver = {
.id_table = microread_mei_tbl,
.name = MICROREAD_DRIVER_NAME,
pr_debug(DRIVER_DESC ": %s\n", __func__);
- r = mei_driver_register(µread_driver);
+ r = mei_cl_driver_register(µread_driver);
if (r) {
pr_err(MICROREAD_DRIVER_NAME ": driver registration failed\n");
return r;
static void microread_mei_exit(void)
{
- mei_driver_unregister(µread_driver);
+ mei_cl_driver_unregister(µread_driver);
}
module_init(microread_mei_init);
}
EXPORT_SYMBOL(of_find_node_by_phandle);
+/**
+ * of_find_property_value_of_size
+ *
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @len: requested length of property value
+ *
+ * Search for a property in a device node and valid the requested size.
+ * Returns the property value on success, -EINVAL if the property does not
+ * exist, -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ */
+static void *of_find_property_value_of_size(const struct device_node *np,
+ const char *propname, u32 len)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+
+ if (!prop)
+ return ERR_PTR(-EINVAL);
+ if (!prop->value)
+ return ERR_PTR(-ENODATA);
+ if (len > prop->length)
+ return ERR_PTR(-EOVERFLOW);
+
+ return prop->value;
+}
+
+/**
+ * of_property_read_u32_index - Find and read a u32 from a multi-value property.
+ *
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the u32 in the list of values
+ * @out_value: pointer to return value, modified only if no error.
+ *
+ * Search for a property in a device node and read nth 32-bit value from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_value is modified only if a valid u32 value can be decoded.
+ */
+int of_property_read_u32_index(const struct device_node *np,
+ const char *propname,
+ u32 index, u32 *out_value)
+{
+ const u32 *val = of_find_property_value_of_size(np, propname,
+ ((index + 1) * sizeof(*out_value)));
+
+ if (IS_ERR(val))
+ return PTR_ERR(val);
+
+ *out_value = be32_to_cpup(((__be32 *)val) + index);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u32_index);
+
/**
* of_property_read_u8_array - Find and read an array of u8 from a property.
*
int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz)
{
- struct property *prop = of_find_property(np, propname, NULL);
- const u8 *val;
+ const u8 *val = of_find_property_value_of_size(np, propname,
+ (sz * sizeof(*out_values)));
- if (!prop)
- return -EINVAL;
- if (!prop->value)
- return -ENODATA;
- if ((sz * sizeof(*out_values)) > prop->length)
- return -EOVERFLOW;
+ if (IS_ERR(val))
+ return PTR_ERR(val);
- val = prop->value;
while (sz--)
*out_values++ = *val++;
return 0;
int of_property_read_u16_array(const struct device_node *np,
const char *propname, u16 *out_values, size_t sz)
{
- struct property *prop = of_find_property(np, propname, NULL);
- const __be16 *val;
+ const __be16 *val = of_find_property_value_of_size(np, propname,
+ (sz * sizeof(*out_values)));
- if (!prop)
- return -EINVAL;
- if (!prop->value)
- return -ENODATA;
- if ((sz * sizeof(*out_values)) > prop->length)
- return -EOVERFLOW;
+ if (IS_ERR(val))
+ return PTR_ERR(val);
- val = prop->value;
while (sz--)
*out_values++ = be16_to_cpup(val++);
return 0;
const char *propname, u32 *out_values,
size_t sz)
{
- struct property *prop = of_find_property(np, propname, NULL);
- const __be32 *val;
+ const __be32 *val = of_find_property_value_of_size(np, propname,
+ (sz * sizeof(*out_values)));
- if (!prop)
- return -EINVAL;
- if (!prop->value)
- return -ENODATA;
- if ((sz * sizeof(*out_values)) > prop->length)
- return -EOVERFLOW;
+ if (IS_ERR(val))
+ return PTR_ERR(val);
- val = prop->value;
while (sz--)
*out_values++ = be32_to_cpup(val++);
return 0;
int of_property_read_u64(const struct device_node *np, const char *propname,
u64 *out_value)
{
- struct property *prop = of_find_property(np, propname, NULL);
+ const __be32 *val = of_find_property_value_of_size(np, propname,
+ sizeof(*out_value));
- if (!prop)
- return -EINVAL;
- if (!prop->value)
- return -ENODATA;
- if (sizeof(*out_value) > prop->length)
- return -EOVERFLOW;
- *out_value = of_read_number(prop->value, 2);
+ if (IS_ERR(val))
+ return PTR_ERR(val);
+
+ *out_value = of_read_number(val, 2);
return 0;
}
EXPORT_SYMBOL_GPL(of_property_read_u64);
return;
}
- if (!pci_dev->pm_cap || !pci_dev->pme_support
- || pci_check_pme_status(pci_dev)) {
- if (pci_dev->pme_poll)
- pci_dev->pme_poll = false;
+ /* Clear PME Status if set. */
+ if (pci_dev->pme_support)
+ pci_check_pme_status(pci_dev);
- pci_wakeup_event(pci_dev);
- pm_runtime_resume(&pci_dev->dev);
- }
+ if (pci_dev->pme_poll)
+ pci_dev->pme_poll = false;
+
+ pci_wakeup_event(pci_dev);
+ pm_runtime_resume(&pci_dev->dev);
if (pci_dev->subordinate)
pci_pme_wakeup_bus(pci_dev->subordinate);
/*
* Turn off Bus Master bit on the device to tell it to not
- * continue to do DMA
+ * continue to do DMA. Don't touch devices in D3cold or unknown states.
*/
- pci_clear_master(pci_dev);
+ if (pci_dev->current_state <= PCI_D3hot)
+ pci_clear_master(pci_dev);
}
#ifdef CONFIG_PM
#define PCIE_PORTDRV_PM_OPS NULL
#endif /* !PM */
-/*
- * PCIe port runtime suspend is broken for some chipsets, so use a
- * black list to disable runtime PM for these chipsets.
- */
-static const struct pci_device_id port_runtime_pm_black_list[] = {
- { /* end: all zeroes */ }
-};
-
/*
* pcie_portdrv_probe - Probe PCI-Express port devices
* @dev: PCI-Express port device being probed
* it by default.
*/
dev->d3cold_allowed = false;
- if (!pci_match_id(port_runtime_pm_black_list, dev))
- pm_runtime_put_noidle(&dev->dev);
-
return 0;
}
static void pcie_portdrv_remove(struct pci_dev *dev)
{
- if (!pci_match_id(port_runtime_pm_black_list, dev))
- pm_runtime_get_noresume(&dev->dev);
pcie_port_device_remove(dev);
pci_disable_device(dev);
}
loff_t start;
void __iomem *rom;
- /*
- * Some devices may provide ROMs via a source other than the BAR
- */
- if (pdev->rom && pdev->romlen) {
- *size = pdev->romlen;
- return phys_to_virt(pdev->rom);
/*
* IORESOURCE_ROM_SHADOW set on x86, x86_64 and IA64 supports legacy
* memory map if the VGA enable bit of the Bridge Control register is
* set for embedded VGA.
*/
- } else if (res->flags & IORESOURCE_ROM_SHADOW) {
+ if (res->flags & IORESOURCE_ROM_SHADOW) {
/* primary video rom always starts here */
start = (loff_t)0xC0000;
*size = 0x20000; /* cover C000:0 through E000:0 */
if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY))
return;
- if (!pdev->rom || !pdev->romlen)
- iounmap(rom);
+ iounmap(rom);
/* Disable again before continuing, leave enabled if pci=rom */
if (!(res->flags & (IORESOURCE_ROM_ENABLE | IORESOURCE_ROM_SHADOW)))
}
}
+/**
+ * pci_platform_rom - provides a pointer to any ROM image provided by the
+ * platform
+ * @pdev: pointer to pci device struct
+ * @size: pointer to receive size of pci window over ROM
+ */
+void __iomem *pci_platform_rom(struct pci_dev *pdev, size_t *size)
+{
+ if (pdev->rom && pdev->romlen) {
+ *size = pdev->romlen;
+ return phys_to_virt((phys_addr_t)pdev->rom);
+ }
+
+ return NULL;
+}
+
EXPORT_SYMBOL(pci_map_rom);
EXPORT_SYMBOL(pci_unmap_rom);
EXPORT_SYMBOL_GPL(pci_enable_rom);
EXPORT_SYMBOL_GPL(pci_disable_rom);
+EXPORT_SYMBOL(pci_platform_rom);
source "drivers/pinctrl/mvebu/Kconfig"
source "drivers/pinctrl/sh-pfc/Kconfig"
source "drivers/pinctrl/spear/Kconfig"
+source "drivers/pinctrl/vt8500/Kconfig"
config PINCTRL_XWAY
bool
obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/
obj-$(CONFIG_SUPERH) += sh-pfc/
obj-$(CONFIG_PLAT_SPEAR) += spear/
+obj-$(CONFIG_ARCH_VT8500) += vt8500/
/* special soc specific control */
if (ctrl->mpp_get || ctrl->mpp_set) {
- if (!ctrl->name || !ctrl->mpp_set || !ctrl->mpp_set) {
+ if (!ctrl->name || !ctrl->mpp_get || !ctrl->mpp_set) {
dev_err(&pdev->dev, "wrong soc control info\n");
return -EINVAL;
}
static int pinconf_dbg_state_print(struct seq_file *s, void *d)
{
if (strlen(dbg_state_name))
- seq_printf(s, "%s\n", dbg_pinname);
+ seq_printf(s, "%s\n", dbg_state_name);
else
seq_printf(s, "No pin state set\n");
return 0;
* pin config.
*/
-#ifdef CONFIG_GENERIC_PINCONF
+#if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_DEBUG_FS)
void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned pin);
}
/* check if pin use AlternateFunction register */
- if ((af.alt_bit1 == UNUSED) && (af.alt_bit1 == UNUSED))
+ if ((af.alt_bit1 == UNUSED) && (af.alt_bit2 == UNUSED))
return mode;
/*
* if pin GPIOSEL bit is set and pin supports alternate function,
}
#ifdef CONFIG_PM
+
+static u32 wakeups[MAX_GPIO_BANKS];
+static u32 backups[MAX_GPIO_BANKS];
+
static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
{
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
unsigned bank = at91_gpio->pioc_idx;
+ unsigned mask = 1 << d->hwirq;
if (unlikely(bank >= MAX_GPIO_BANKS))
return -EINVAL;
+ if (state)
+ wakeups[bank] |= mask;
+ else
+ wakeups[bank] &= ~mask;
+
irq_set_irq_wake(at91_gpio->pioc_virq, state);
return 0;
}
+
+void at91_pinctrl_gpio_suspend(void)
+{
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+ void __iomem *pio;
+
+ if (!gpio_chips[i])
+ continue;
+
+ pio = gpio_chips[i]->regbase;
+
+ backups[i] = __raw_readl(pio + PIO_IMR);
+ __raw_writel(backups[i], pio + PIO_IDR);
+ __raw_writel(wakeups[i], pio + PIO_IER);
+
+ if (!wakeups[i]) {
+ clk_unprepare(gpio_chips[i]->clock);
+ clk_disable(gpio_chips[i]->clock);
+ } else {
+ printk(KERN_DEBUG "GPIO-%c may wake for %08x\n",
+ 'A'+i, wakeups[i]);
+ }
+ }
+}
+
+void at91_pinctrl_gpio_resume(void)
+{
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+ void __iomem *pio;
+
+ if (!gpio_chips[i])
+ continue;
+
+ pio = gpio_chips[i]->regbase;
+
+ if (!wakeups[i]) {
+ if (clk_prepare(gpio_chips[i]->clock) == 0)
+ clk_enable(gpio_chips[i]->clock);
+ }
+
+ __raw_writel(wakeups[i], pio + PIO_IDR);
+ __raw_writel(backups[i], pio + PIO_IER);
+ }
+}
+
#else
#define gpio_irq_set_wake NULL
-#endif
+#endif /* CONFIG_PM */
static struct irq_chip gpio_irqchip = {
.name = "GPIO",
return 0;
}
-static inline u32 prop_u32(struct property *p, int i)
-{
- return be32_to_cpup(((__be32 *)p->value) + i);
-}
-
static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np,
struct pinctrl_map **map, unsigned *num_maps)
return -ENOMEM;
for (i = 0; i < num_pins; i++) {
- pin = prop_u32(pins, i);
+ err = of_property_read_u32_index(np, "brcm,pins", i, &pin);
+ if (err)
+ goto out;
if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) {
dev_err(pc->dev, "%s: invalid brcm,pins value %d\n",
of_node_full_name(np), pin);
}
if (num_funcs) {
- func = prop_u32(funcs, (num_funcs > 1) ? i : 0);
+ err = of_property_read_u32_index(np, "brcm,function",
+ (num_funcs > 1) ? i : 0, &func);
+ if (err)
+ goto out;
err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin,
func, &cur_map);
if (err)
goto out;
}
if (num_pulls) {
- pull = prop_u32(pulls, (num_pulls > 1) ? i : 0);
+ err = of_property_read_u32_index(np, "brcm,pull",
+ (num_funcs > 1) ? i : 0, &pull);
+ if (err)
+ goto out;
err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin,
pull, &cur_map);
if (err)
.label = "exynos4x12-gpio-ctrl3",
},
};
+
+/* pin banks of exynos5250 pin-controller 0 */
+static struct samsung_pin_bank exynos5250_pin_banks0[] = {
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
+ EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
+ EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
+ EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18),
+ EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c),
+ EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc1", 0x20),
+ EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc2", 0x24),
+ EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc3", 0x28),
+ EXYNOS_PIN_BANK_EINTG(4, 0x160, "gpd0", 0x2c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x30),
+ EXYNOS_PIN_BANK_EINTG(7, 0x2E0, "gpc4", 0x34),
+ EXYNOS_PIN_BANK_EINTN(6, 0x1A0, "gpy0"),
+ EXYNOS_PIN_BANK_EINTN(4, 0x1C0, "gpy1"),
+ EXYNOS_PIN_BANK_EINTN(6, 0x1E0, "gpy2"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x200, "gpy3"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x220, "gpy4"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x240, "gpy5"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x260, "gpy6"),
+ EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
+ EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
+ EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
+ EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
+};
+
+/* pin banks of exynos5250 pin-controller 1 */
+static struct samsung_pin_bank exynos5250_pin_banks1[] = {
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04),
+ EXYNOS_PIN_BANK_EINTG(4, 0x040, "gpf0", 0x08),
+ EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf1", 0x0c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10),
+ EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14),
+ EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gph0", 0x1c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph1", 0x20),
+};
+
+/* pin banks of exynos5250 pin-controller 2 */
+static struct samsung_pin_bank exynos5250_pin_banks2[] = {
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
+ EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08),
+ EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c),
+ EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10),
+};
+
+/* pin banks of exynos5250 pin-controller 3 */
+static struct samsung_pin_bank exynos5250_pin_banks3[] = {
+ EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos5250 SoC. Exynos5250 SoC includes
+ * four gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pin_ctrl exynos5250_pin_ctrl[] = {
+ {
+ /* pin-controller instance 0 data */
+ .pin_banks = exynos5250_pin_banks0,
+ .nr_banks = ARRAY_SIZE(exynos5250_pin_banks0),
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .weint_con = EXYNOS_WKUP_ECON_OFFSET,
+ .weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
+ .weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .eint_wkup_init = exynos_eint_wkup_init,
+ .label = "exynos5250-gpio-ctrl0",
+ }, {
+ /* pin-controller instance 1 data */
+ .pin_banks = exynos5250_pin_banks1,
+ .nr_banks = ARRAY_SIZE(exynos5250_pin_banks1),
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .label = "exynos5250-gpio-ctrl1",
+ }, {
+ /* pin-controller instance 2 data */
+ .pin_banks = exynos5250_pin_banks2,
+ .nr_banks = ARRAY_SIZE(exynos5250_pin_banks2),
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .label = "exynos5250-gpio-ctrl2",
+ }, {
+ /* pin-controller instance 3 data */
+ .pin_banks = exynos5250_pin_banks3,
+ .nr_banks = ARRAY_SIZE(exynos5250_pin_banks3),
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .label = "exynos5250-gpio-ctrl3",
+ },
+};
.data = (void *)exynos4210_pin_ctrl },
{ .compatible = "samsung,exynos4x12-pinctrl",
.data = (void *)exynos4x12_pin_ctrl },
+ { .compatible = "samsung,exynos5250-pinctrl",
+ .data = (void *)exynos5250_pin_ctrl },
{},
};
MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
/* list of all exported SoC specific data */
extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
+extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
#endif /* __PINCTRL_SAMSUNG_H */
}
if (!gpio_range) {
+ /*
+ * A pin should not be freed more times than allocated.
+ */
+ if (WARN_ON(!desc->mux_usecount))
+ return NULL;
desc->mux_usecount--;
if (desc->mux_usecount)
return NULL;
{ },
};
-/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */
-#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5))
-#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5))
+/* External IRQ pins mapped at IRQPIN_BASE */
+#define EXT_IRQ16L(n) irq_pin(n)
+#define EXT_IRQ16H(n) irq_pin(n)
static struct pinmux_irq pinmux_irqs[] = {
PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0),
--- /dev/null
+#
+# VIA/Wondermedia PINCTRL drivers
+#
+
+if ARCH_VT8500
+
+config PINCTRL_WMT
+ bool
+ select PINMUX
+ select GENERIC_PINCONF
+
+config PINCTRL_VT8500
+ bool "VIA VT8500 pin controller driver"
+ depends on ARCH_WM8505
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ VIA VT8500 SoCs.
+
+config PINCTRL_WM8505
+ bool "Wondermedia WM8505 pin controller driver"
+ depends on ARCH_WM8505
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ Wondermedia WM8505 SoCs.
+
+config PINCTRL_WM8650
+ bool "Wondermedia WM8650 pin controller driver"
+ depends on ARCH_WM8505
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ Wondermedia WM8650 SoCs.
+
+config PINCTRL_WM8750
+ bool "Wondermedia WM8750 pin controller driver"
+ depends on ARCH_WM8750
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ Wondermedia WM8750 SoCs.
+
+config PINCTRL_WM8850
+ bool "Wondermedia WM8850 pin controller driver"
+ depends on ARCH_WM8850
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ Wondermedia WM8850 SoCs.
+
+endif
--- /dev/null
+# VIA/Wondermedia pinctrl support
+
+obj-$(CONFIG_PINCTRL_WMT) += pinctrl-wmt.o
+obj-$(CONFIG_PINCTRL_VT8500) += pinctrl-vt8500.o
+obj-$(CONFIG_PINCTRL_WM8505) += pinctrl-wm8505.o
+obj-$(CONFIG_PINCTRL_WM8650) += pinctrl-wm8650.o
+obj-$(CONFIG_PINCTRL_WM8750) += pinctrl-wm8750.o
+obj-$(CONFIG_PINCTRL_WM8850) += pinctrl-wm8850.o
--- /dev/null
+/*
+ * Pinctrl data for VIA VT8500 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers vt8500_banks[] = {
+ WMT_PINCTRL_BANK(NO_REG, 0x3C, 0x5C, 0x7C, NO_REG, NO_REG), /* 0 */
+ WMT_PINCTRL_BANK(0x00, 0x20, 0x40, 0x60, NO_REG, NO_REG), /* 1 */
+ WMT_PINCTRL_BANK(0x04, 0x24, 0x44, 0x64, NO_REG, NO_REG), /* 2 */
+ WMT_PINCTRL_BANK(0x08, 0x28, 0x48, 0x68, NO_REG, NO_REG), /* 3 */
+ WMT_PINCTRL_BANK(0x0C, 0x2C, 0x4C, 0x6C, NO_REG, NO_REG), /* 4 */
+ WMT_PINCTRL_BANK(0x10, 0x30, 0x50, 0x70, NO_REG, NO_REG), /* 5 */
+ WMT_PINCTRL_BANK(0x14, 0x34, 0x54, 0x74, NO_REG, NO_REG), /* 6 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_EXTGPIO8 WMT_PIN(0, 8)
+#define WMT_PIN_UART0RTS WMT_PIN(1, 0)
+#define WMT_PIN_UART0TXD WMT_PIN(1, 1)
+#define WMT_PIN_UART0CTS WMT_PIN(1, 2)
+#define WMT_PIN_UART0RXD WMT_PIN(1, 3)
+#define WMT_PIN_UART1RTS WMT_PIN(1, 4)
+#define WMT_PIN_UART1TXD WMT_PIN(1, 5)
+#define WMT_PIN_UART1CTS WMT_PIN(1, 6)
+#define WMT_PIN_UART1RXD WMT_PIN(1, 7)
+#define WMT_PIN_SPI0CLK WMT_PIN(1, 8)
+#define WMT_PIN_SPI0SS WMT_PIN(1, 9)
+#define WMT_PIN_SPI0MISO WMT_PIN(1, 10)
+#define WMT_PIN_SPI0MOSI WMT_PIN(1, 11)
+#define WMT_PIN_SPI1CLK WMT_PIN(1, 12)
+#define WMT_PIN_SPI1SS WMT_PIN(1, 13)
+#define WMT_PIN_SPI1MISO WMT_PIN(1, 14)
+#define WMT_PIN_SPI1MOSI WMT_PIN(1, 15)
+#define WMT_PIN_SPI2CLK WMT_PIN(1, 16)
+#define WMT_PIN_SPI2SS WMT_PIN(1, 17)
+#define WMT_PIN_SPI2MISO WMT_PIN(1, 18)
+#define WMT_PIN_SPI2MOSI WMT_PIN(1, 19)
+#define WMT_PIN_SDDATA0 WMT_PIN(2, 0)
+#define WMT_PIN_SDDATA1 WMT_PIN(2, 1)
+#define WMT_PIN_SDDATA2 WMT_PIN(2, 2)
+#define WMT_PIN_SDDATA3 WMT_PIN(2, 3)
+#define WMT_PIN_MMCDATA0 WMT_PIN(2, 4)
+#define WMT_PIN_MMCDATA1 WMT_PIN(2, 5)
+#define WMT_PIN_MMCDATA2 WMT_PIN(2, 6)
+#define WMT_PIN_MMCDATA3 WMT_PIN(2, 7)
+#define WMT_PIN_SDCLK WMT_PIN(2, 8)
+#define WMT_PIN_SDWP WMT_PIN(2, 9)
+#define WMT_PIN_SDCMD WMT_PIN(2, 10)
+#define WMT_PIN_MSDATA0 WMT_PIN(2, 16)
+#define WMT_PIN_MSDATA1 WMT_PIN(2, 17)
+#define WMT_PIN_MSDATA2 WMT_PIN(2, 18)
+#define WMT_PIN_MSDATA3 WMT_PIN(2, 19)
+#define WMT_PIN_MSCLK WMT_PIN(2, 20)
+#define WMT_PIN_MSBS WMT_PIN(2, 21)
+#define WMT_PIN_MSINS WMT_PIN(2, 22)
+#define WMT_PIN_I2C0SCL WMT_PIN(2, 24)
+#define WMT_PIN_I2C0SDA WMT_PIN(2, 25)
+#define WMT_PIN_I2C1SCL WMT_PIN(2, 26)
+#define WMT_PIN_I2C1SDA WMT_PIN(2, 27)
+#define WMT_PIN_MII0RXD0 WMT_PIN(3, 0)
+#define WMT_PIN_MII0RXD1 WMT_PIN(3, 1)
+#define WMT_PIN_MII0RXD2 WMT_PIN(3, 2)
+#define WMT_PIN_MII0RXD3 WMT_PIN(3, 3)
+#define WMT_PIN_MII0RXCLK WMT_PIN(3, 4)
+#define WMT_PIN_MII0RXDV WMT_PIN(3, 5)
+#define WMT_PIN_MII0RXERR WMT_PIN(3, 6)
+#define WMT_PIN_MII0PHYRST WMT_PIN(3, 7)
+#define WMT_PIN_MII0TXD0 WMT_PIN(3, 8)
+#define WMT_PIN_MII0TXD1 WMT_PIN(3, 9)
+#define WMT_PIN_MII0TXD2 WMT_PIN(3, 10)
+#define WMT_PIN_MII0TXD3 WMT_PIN(3, 11)
+#define WMT_PIN_MII0TXCLK WMT_PIN(3, 12)
+#define WMT_PIN_MII0TXEN WMT_PIN(3, 13)
+#define WMT_PIN_MII0TXERR WMT_PIN(3, 14)
+#define WMT_PIN_MII0PHYPD WMT_PIN(3, 15)
+#define WMT_PIN_MII0COL WMT_PIN(3, 16)
+#define WMT_PIN_MII0CRS WMT_PIN(3, 17)
+#define WMT_PIN_MII0MDIO WMT_PIN(3, 18)
+#define WMT_PIN_MII0MDC WMT_PIN(3, 19)
+#define WMT_PIN_SEECS WMT_PIN(3, 20)
+#define WMT_PIN_SEECK WMT_PIN(3, 21)
+#define WMT_PIN_SEEDI WMT_PIN(3, 22)
+#define WMT_PIN_SEEDO WMT_PIN(3, 23)
+#define WMT_PIN_IDEDREQ0 WMT_PIN(3, 24)
+#define WMT_PIN_IDEDREQ1 WMT_PIN(3, 25)
+#define WMT_PIN_IDEIOW WMT_PIN(3, 26)
+#define WMT_PIN_IDEIOR WMT_PIN(3, 27)
+#define WMT_PIN_IDEDACK WMT_PIN(3, 28)
+#define WMT_PIN_IDEIORDY WMT_PIN(3, 29)
+#define WMT_PIN_IDEINTRQ WMT_PIN(3, 30)
+#define WMT_PIN_VDIN0 WMT_PIN(4, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(4, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(4, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(4, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(4, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(4, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(4, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(4, 7)
+#define WMT_PIN_VDOUT0 WMT_PIN(4, 8)
+#define WMT_PIN_VDOUT1 WMT_PIN(4, 9)
+#define WMT_PIN_VDOUT2 WMT_PIN(4, 10)
+#define WMT_PIN_VDOUT3 WMT_PIN(4, 11)
+#define WMT_PIN_VDOUT4 WMT_PIN(4, 12)
+#define WMT_PIN_VDOUT5 WMT_PIN(4, 13)
+#define WMT_PIN_NANDCLE0 WMT_PIN(4, 14)
+#define WMT_PIN_NANDCLE1 WMT_PIN(4, 15)
+#define WMT_PIN_VDOUT6_7 WMT_PIN(4, 16)
+#define WMT_PIN_VHSYNC WMT_PIN(4, 17)
+#define WMT_PIN_VVSYNC WMT_PIN(4, 18)
+#define WMT_PIN_TSDIN0 WMT_PIN(5, 8)
+#define WMT_PIN_TSDIN1 WMT_PIN(5, 9)
+#define WMT_PIN_TSDIN2 WMT_PIN(5, 10)
+#define WMT_PIN_TSDIN3 WMT_PIN(5, 11)
+#define WMT_PIN_TSDIN4 WMT_PIN(5, 12)
+#define WMT_PIN_TSDIN5 WMT_PIN(5, 13)
+#define WMT_PIN_TSDIN6 WMT_PIN(5, 14)
+#define WMT_PIN_TSDIN7 WMT_PIN(5, 15)
+#define WMT_PIN_TSSYNC WMT_PIN(5, 16)
+#define WMT_PIN_TSVALID WMT_PIN(5, 17)
+#define WMT_PIN_TSCLK WMT_PIN(5, 18)
+#define WMT_PIN_LCDD0 WMT_PIN(6, 0)
+#define WMT_PIN_LCDD1 WMT_PIN(6, 1)
+#define WMT_PIN_LCDD2 WMT_PIN(6, 2)
+#define WMT_PIN_LCDD3 WMT_PIN(6, 3)
+#define WMT_PIN_LCDD4 WMT_PIN(6, 4)
+#define WMT_PIN_LCDD5 WMT_PIN(6, 5)
+#define WMT_PIN_LCDD6 WMT_PIN(6, 6)
+#define WMT_PIN_LCDD7 WMT_PIN(6, 7)
+#define WMT_PIN_LCDD8 WMT_PIN(6, 8)
+#define WMT_PIN_LCDD9 WMT_PIN(6, 9)
+#define WMT_PIN_LCDD10 WMT_PIN(6, 10)
+#define WMT_PIN_LCDD11 WMT_PIN(6, 11)
+#define WMT_PIN_LCDD12 WMT_PIN(6, 12)
+#define WMT_PIN_LCDD13 WMT_PIN(6, 13)
+#define WMT_PIN_LCDD14 WMT_PIN(6, 14)
+#define WMT_PIN_LCDD15 WMT_PIN(6, 15)
+#define WMT_PIN_LCDD16 WMT_PIN(6, 16)
+#define WMT_PIN_LCDD17 WMT_PIN(6, 17)
+#define WMT_PIN_LCDCLK WMT_PIN(6, 18)
+#define WMT_PIN_LCDDEN WMT_PIN(6, 19)
+#define WMT_PIN_LCDLINE WMT_PIN(6, 20)
+#define WMT_PIN_LCDFRM WMT_PIN(6, 21)
+#define WMT_PIN_LCDBIAS WMT_PIN(6, 22)
+
+static const struct pinctrl_pin_desc vt8500_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO8, "extgpio8"),
+ PINCTRL_PIN(WMT_PIN_UART0RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS, "spi0_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI1CLK, "spi1_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI1SS, "spi1_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI1MISO, "spi1_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI1MOSI, "spi1_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI2CLK, "spi2_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI2SS, "spi2_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI2MISO, "spi2_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI2MOSI, "spi2_mosi"),
+ PINCTRL_PIN(WMT_PIN_SDDATA0, "sd_data0"),
+ PINCTRL_PIN(WMT_PIN_SDDATA1, "sd_data1"),
+ PINCTRL_PIN(WMT_PIN_SDDATA2, "sd_data2"),
+ PINCTRL_PIN(WMT_PIN_SDDATA3, "sd_data3"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA0, "mmc_data0"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA1, "mmc_data1"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA2, "mmc_data2"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA3, "mmc_data3"),
+ PINCTRL_PIN(WMT_PIN_SDCLK, "sd_clk"),
+ PINCTRL_PIN(WMT_PIN_SDWP, "sd_wp"),
+ PINCTRL_PIN(WMT_PIN_SDCMD, "sd_cmd"),
+ PINCTRL_PIN(WMT_PIN_MSDATA0, "ms_data0"),
+ PINCTRL_PIN(WMT_PIN_MSDATA1, "ms_data1"),
+ PINCTRL_PIN(WMT_PIN_MSDATA2, "ms_data2"),
+ PINCTRL_PIN(WMT_PIN_MSDATA3, "ms_data3"),
+ PINCTRL_PIN(WMT_PIN_MSCLK, "ms_clk"),
+ PINCTRL_PIN(WMT_PIN_MSBS, "ms_bs"),
+ PINCTRL_PIN(WMT_PIN_MSINS, "ms_ins"),
+ PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_MII0RXD0, "mii0_rxd0"),
+ PINCTRL_PIN(WMT_PIN_MII0RXD1, "mii0_rxd1"),
+ PINCTRL_PIN(WMT_PIN_MII0RXD2, "mii0_rxd2"),
+ PINCTRL_PIN(WMT_PIN_MII0RXD3, "mii0_rxd3"),
+ PINCTRL_PIN(WMT_PIN_MII0RXCLK, "mii0_rxclk"),
+ PINCTRL_PIN(WMT_PIN_MII0RXDV, "mii0_rxdv"),
+ PINCTRL_PIN(WMT_PIN_MII0RXERR, "mii0_rxerr"),
+ PINCTRL_PIN(WMT_PIN_MII0PHYRST, "mii0_phyrst"),
+ PINCTRL_PIN(WMT_PIN_MII0TXD0, "mii0_txd0"),
+ PINCTRL_PIN(WMT_PIN_MII0TXD1, "mii0_txd1"),
+ PINCTRL_PIN(WMT_PIN_MII0TXD2, "mii0_txd2"),
+ PINCTRL_PIN(WMT_PIN_MII0TXD3, "mii0_txd3"),
+ PINCTRL_PIN(WMT_PIN_MII0TXCLK, "mii0_txclk"),
+ PINCTRL_PIN(WMT_PIN_MII0TXEN, "mii0_txen"),
+ PINCTRL_PIN(WMT_PIN_MII0TXERR, "mii0_txerr"),
+ PINCTRL_PIN(WMT_PIN_MII0PHYPD, "mii0_phypd"),
+ PINCTRL_PIN(WMT_PIN_MII0COL, "mii0_col"),
+ PINCTRL_PIN(WMT_PIN_MII0CRS, "mii0_crs"),
+ PINCTRL_PIN(WMT_PIN_MII0MDIO, "mii0_mdio"),
+ PINCTRL_PIN(WMT_PIN_MII0MDC, "mii0_mdc"),
+ PINCTRL_PIN(WMT_PIN_SEECS, "see_cs"),
+ PINCTRL_PIN(WMT_PIN_SEECK, "see_ck"),
+ PINCTRL_PIN(WMT_PIN_SEEDI, "see_di"),
+ PINCTRL_PIN(WMT_PIN_SEEDO, "see_do"),
+ PINCTRL_PIN(WMT_PIN_IDEDREQ0, "ide_dreq0"),
+ PINCTRL_PIN(WMT_PIN_IDEDREQ1, "ide_dreq1"),
+ PINCTRL_PIN(WMT_PIN_IDEIOW, "ide_iow"),
+ PINCTRL_PIN(WMT_PIN_IDEIOR, "ide_ior"),
+ PINCTRL_PIN(WMT_PIN_IDEDACK, "ide_dack"),
+ PINCTRL_PIN(WMT_PIN_IDEIORDY, "ide_iordy"),
+ PINCTRL_PIN(WMT_PIN_IDEINTRQ, "ide_intrq"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_NANDCLE0, "nand_cle0"),
+ PINCTRL_PIN(WMT_PIN_NANDCLE1, "nand_cle1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6_7, "vdout6_7"),
+ PINCTRL_PIN(WMT_PIN_VHSYNC, "vhsync"),
+ PINCTRL_PIN(WMT_PIN_VVSYNC, "vvsync"),
+ PINCTRL_PIN(WMT_PIN_TSDIN0, "tsdin0"),
+ PINCTRL_PIN(WMT_PIN_TSDIN1, "tsdin1"),
+ PINCTRL_PIN(WMT_PIN_TSDIN2, "tsdin2"),
+ PINCTRL_PIN(WMT_PIN_TSDIN3, "tsdin3"),
+ PINCTRL_PIN(WMT_PIN_TSDIN4, "tsdin4"),
+ PINCTRL_PIN(WMT_PIN_TSDIN5, "tsdin5"),
+ PINCTRL_PIN(WMT_PIN_TSDIN6, "tsdin6"),
+ PINCTRL_PIN(WMT_PIN_TSDIN7, "tsdin7"),
+ PINCTRL_PIN(WMT_PIN_TSSYNC, "tssync"),
+ PINCTRL_PIN(WMT_PIN_TSVALID, "tsvalid"),
+ PINCTRL_PIN(WMT_PIN_TSCLK, "tsclk"),
+ PINCTRL_PIN(WMT_PIN_LCDD0, "lcd_d0"),
+ PINCTRL_PIN(WMT_PIN_LCDD1, "lcd_d1"),
+ PINCTRL_PIN(WMT_PIN_LCDD2, "lcd_d2"),
+ PINCTRL_PIN(WMT_PIN_LCDD3, "lcd_d3"),
+ PINCTRL_PIN(WMT_PIN_LCDD4, "lcd_d4"),
+ PINCTRL_PIN(WMT_PIN_LCDD5, "lcd_d5"),
+ PINCTRL_PIN(WMT_PIN_LCDD6, "lcd_d6"),
+ PINCTRL_PIN(WMT_PIN_LCDD7, "lcd_d7"),
+ PINCTRL_PIN(WMT_PIN_LCDD8, "lcd_d8"),
+ PINCTRL_PIN(WMT_PIN_LCDD9, "lcd_d9"),
+ PINCTRL_PIN(WMT_PIN_LCDD10, "lcd_d10"),
+ PINCTRL_PIN(WMT_PIN_LCDD11, "lcd_d11"),
+ PINCTRL_PIN(WMT_PIN_LCDD12, "lcd_d12"),
+ PINCTRL_PIN(WMT_PIN_LCDD13, "lcd_d13"),
+ PINCTRL_PIN(WMT_PIN_LCDD14, "lcd_d14"),
+ PINCTRL_PIN(WMT_PIN_LCDD15, "lcd_d15"),
+ PINCTRL_PIN(WMT_PIN_LCDD16, "lcd_d16"),
+ PINCTRL_PIN(WMT_PIN_LCDD17, "lcd_d17"),
+ PINCTRL_PIN(WMT_PIN_LCDCLK, "lcd_clk"),
+ PINCTRL_PIN(WMT_PIN_LCDDEN, "lcd_den"),
+ PINCTRL_PIN(WMT_PIN_LCDLINE, "lcd_line"),
+ PINCTRL_PIN(WMT_PIN_LCDFRM, "lcd_frm"),
+ PINCTRL_PIN(WMT_PIN_LCDBIAS, "lcd_bias"),
+};
+
+/* Order of these names must match the above list */
+static const char * const vt8500_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "extgpio8",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "spi0_clk",
+ "spi0_ss",
+ "spi0_miso",
+ "spi0_mosi",
+ "spi1_clk",
+ "spi1_ss",
+ "spi1_miso",
+ "spi1_mosi",
+ "spi2_clk",
+ "spi2_ss",
+ "spi2_miso",
+ "spi2_mosi",
+ "sd_data0",
+ "sd_data1",
+ "sd_data2",
+ "sd_data3",
+ "mmc_data0",
+ "mmc_data1",
+ "mmc_data2",
+ "mmc_data3",
+ "sd_clk",
+ "sd_wp",
+ "sd_cmd",
+ "ms_data0",
+ "ms_data1",
+ "ms_data2",
+ "ms_data3",
+ "ms_clk",
+ "ms_bs",
+ "ms_ins",
+ "i2c0_scl",
+ "i2c0_sda",
+ "i2c1_scl",
+ "i2c1_sda",
+ "mii0_rxd0",
+ "mii0_rxd1",
+ "mii0_rxd2",
+ "mii0_rxd3",
+ "mii0_rxclk",
+ "mii0_rxdv",
+ "mii0_rxerr",
+ "mii0_phyrst",
+ "mii0_txd0",
+ "mii0_txd1",
+ "mii0_txd2",
+ "mii0_txd3",
+ "mii0_txclk",
+ "mii0_txen",
+ "mii0_txerr",
+ "mii0_phypd",
+ "mii0_col",
+ "mii0_crs",
+ "mii0_mdio",
+ "mii0_mdc",
+ "see_cs",
+ "see_ck",
+ "see_di",
+ "see_do",
+ "ide_dreq0",
+ "ide_dreq1",
+ "ide_iow",
+ "ide_ior",
+ "ide_dack",
+ "ide_iordy",
+ "ide_intrq",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "nand_cle0",
+ "nand_cle1",
+ "vdout6_7",
+ "vhsync",
+ "vvsync",
+ "tsdin0",
+ "tsdin1",
+ "tsdin2",
+ "tsdin3",
+ "tsdin4",
+ "tsdin5",
+ "tsdin6",
+ "tsdin7",
+ "tssync",
+ "tsvalid",
+ "tsclk",
+ "lcd_d0",
+ "lcd_d1",
+ "lcd_d2",
+ "lcd_d3",
+ "lcd_d4",
+ "lcd_d5",
+ "lcd_d6",
+ "lcd_d7",
+ "lcd_d8",
+ "lcd_d9",
+ "lcd_d10",
+ "lcd_d11",
+ "lcd_d12",
+ "lcd_d13",
+ "lcd_d14",
+ "lcd_d15",
+ "lcd_d16",
+ "lcd_d17",
+ "lcd_clk",
+ "lcd_den",
+ "lcd_line",
+ "lcd_frm",
+ "lcd_bias",
+};
+
+static int vt8500_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = vt8500_banks;
+ data->nbanks = ARRAY_SIZE(vt8500_banks);
+ data->pins = vt8500_pins;
+ data->npins = ARRAY_SIZE(vt8500_pins);
+ data->groups = vt8500_groups;
+ data->ngroups = ARRAY_SIZE(vt8500_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int vt8500_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "via,vt8500-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = vt8500_pinctrl_probe,
+ .remove = vt8500_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-vt8500",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("VIA VT8500 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
--- /dev/null
+/*
+ * Pinctrl data for Wondermedia WM8505 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers wm8505_banks[] = {
+ WMT_PINCTRL_BANK(0x64, 0x8C, 0xB4, 0xDC, NO_REG, NO_REG), /* 0 */
+ WMT_PINCTRL_BANK(0x40, 0x68, 0x90, 0xB8, NO_REG, NO_REG), /* 1 */
+ WMT_PINCTRL_BANK(0x44, 0x6C, 0x94, 0xBC, NO_REG, NO_REG), /* 2 */
+ WMT_PINCTRL_BANK(0x48, 0x70, 0x98, 0xC0, NO_REG, NO_REG), /* 3 */
+ WMT_PINCTRL_BANK(0x4C, 0x74, 0x9C, 0xC4, NO_REG, NO_REG), /* 4 */
+ WMT_PINCTRL_BANK(0x50, 0x78, 0xA0, 0xC8, NO_REG, NO_REG), /* 5 */
+ WMT_PINCTRL_BANK(0x54, 0x7C, 0xA4, 0xD0, NO_REG, NO_REG), /* 6 */
+ WMT_PINCTRL_BANK(0x58, 0x80, 0xA8, 0xD4, NO_REG, NO_REG), /* 7 */
+ WMT_PINCTRL_BANK(0x5C, 0x84, 0xAC, 0xD8, NO_REG, NO_REG), /* 8 */
+ WMT_PINCTRL_BANK(0x60, 0x88, 0xB0, 0xDC, NO_REG, NO_REG), /* 9 */
+ WMT_PINCTRL_BANK(0x500, 0x504, 0x508, 0x50C, NO_REG, NO_REG), /* 10 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17)
+#define WMT_PIN_WAKEUP2 WMT_PIN(0, 18)
+#define WMT_PIN_WAKEUP3 WMT_PIN(0, 19)
+#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21)
+#define WMT_PIN_SDDATA0 WMT_PIN(1, 0)
+#define WMT_PIN_SDDATA1 WMT_PIN(1, 1)
+#define WMT_PIN_SDDATA2 WMT_PIN(1, 2)
+#define WMT_PIN_SDDATA3 WMT_PIN(1, 3)
+#define WMT_PIN_MMCDATA0 WMT_PIN(1, 4)
+#define WMT_PIN_MMCDATA1 WMT_PIN(1, 5)
+#define WMT_PIN_MMCDATA2 WMT_PIN(1, 6)
+#define WMT_PIN_MMCDATA3 WMT_PIN(1, 7)
+#define WMT_PIN_VDIN0 WMT_PIN(2, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(2, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(2, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(2, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(2, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(2, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(2, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(2, 7)
+#define WMT_PIN_VDOUT0 WMT_PIN(2, 8)
+#define WMT_PIN_VDOUT1 WMT_PIN(2, 9)
+#define WMT_PIN_VDOUT2 WMT_PIN(2, 10)
+#define WMT_PIN_VDOUT3 WMT_PIN(2, 11)
+#define WMT_PIN_VDOUT4 WMT_PIN(2, 12)
+#define WMT_PIN_VDOUT5 WMT_PIN(2, 13)
+#define WMT_PIN_VDOUT6 WMT_PIN(2, 14)
+#define WMT_PIN_VDOUT7 WMT_PIN(2, 15)
+#define WMT_PIN_VDOUT8 WMT_PIN(2, 16)
+#define WMT_PIN_VDOUT9 WMT_PIN(2, 17)
+#define WMT_PIN_VDOUT10 WMT_PIN(2, 18)
+#define WMT_PIN_VDOUT11 WMT_PIN(2, 19)
+#define WMT_PIN_VDOUT12 WMT_PIN(2, 20)
+#define WMT_PIN_VDOUT13 WMT_PIN(2, 21)
+#define WMT_PIN_VDOUT14 WMT_PIN(2, 22)
+#define WMT_PIN_VDOUT15 WMT_PIN(2, 23)
+#define WMT_PIN_VDOUT16 WMT_PIN(2, 24)
+#define WMT_PIN_VDOUT17 WMT_PIN(2, 25)
+#define WMT_PIN_VDOUT18 WMT_PIN(2, 26)
+#define WMT_PIN_VDOUT19 WMT_PIN(2, 27)
+#define WMT_PIN_VDOUT20 WMT_PIN(2, 28)
+#define WMT_PIN_VDOUT21 WMT_PIN(2, 29)
+#define WMT_PIN_VDOUT22 WMT_PIN(2, 30)
+#define WMT_PIN_VDOUT23 WMT_PIN(2, 31)
+#define WMT_PIN_VHSYNC WMT_PIN(3, 0)
+#define WMT_PIN_VVSYNC WMT_PIN(3, 1)
+#define WMT_PIN_VGAHSYNC WMT_PIN(3, 2)
+#define WMT_PIN_VGAVSYNC WMT_PIN(3, 3)
+#define WMT_PIN_VDHSYNC WMT_PIN(3, 4)
+#define WMT_PIN_VDVSYNC WMT_PIN(3, 5)
+#define WMT_PIN_NORD0 WMT_PIN(4, 0)
+#define WMT_PIN_NORD1 WMT_PIN(4, 1)
+#define WMT_PIN_NORD2 WMT_PIN(4, 2)
+#define WMT_PIN_NORD3 WMT_PIN(4, 3)
+#define WMT_PIN_NORD4 WMT_PIN(4, 4)
+#define WMT_PIN_NORD5 WMT_PIN(4, 5)
+#define WMT_PIN_NORD6 WMT_PIN(4, 6)
+#define WMT_PIN_NORD7 WMT_PIN(4, 7)
+#define WMT_PIN_NORD8 WMT_PIN(4, 8)
+#define WMT_PIN_NORD9 WMT_PIN(4, 9)
+#define WMT_PIN_NORD10 WMT_PIN(4, 10)
+#define WMT_PIN_NORD11 WMT_PIN(4, 11)
+#define WMT_PIN_NORD12 WMT_PIN(4, 12)
+#define WMT_PIN_NORD13 WMT_PIN(4, 13)
+#define WMT_PIN_NORD14 WMT_PIN(4, 14)
+#define WMT_PIN_NORD15 WMT_PIN(4, 15)
+#define WMT_PIN_NORA0 WMT_PIN(5, 0)
+#define WMT_PIN_NORA1 WMT_PIN(5, 1)
+#define WMT_PIN_NORA2 WMT_PIN(5, 2)
+#define WMT_PIN_NORA3 WMT_PIN(5, 3)
+#define WMT_PIN_NORA4 WMT_PIN(5, 4)
+#define WMT_PIN_NORA5 WMT_PIN(5, 5)
+#define WMT_PIN_NORA6 WMT_PIN(5, 6)
+#define WMT_PIN_NORA7 WMT_PIN(5, 7)
+#define WMT_PIN_NORA8 WMT_PIN(5, 8)
+#define WMT_PIN_NORA9 WMT_PIN(5, 9)
+#define WMT_PIN_NORA10 WMT_PIN(5, 10)
+#define WMT_PIN_NORA11 WMT_PIN(5, 11)
+#define WMT_PIN_NORA12 WMT_PIN(5, 12)
+#define WMT_PIN_NORA13 WMT_PIN(5, 13)
+#define WMT_PIN_NORA14 WMT_PIN(5, 14)
+#define WMT_PIN_NORA15 WMT_PIN(5, 15)
+#define WMT_PIN_NORA16 WMT_PIN(5, 16)
+#define WMT_PIN_NORA17 WMT_PIN(5, 17)
+#define WMT_PIN_NORA18 WMT_PIN(5, 18)
+#define WMT_PIN_NORA19 WMT_PIN(5, 19)
+#define WMT_PIN_NORA20 WMT_PIN(5, 20)
+#define WMT_PIN_NORA21 WMT_PIN(5, 21)
+#define WMT_PIN_NORA22 WMT_PIN(5, 22)
+#define WMT_PIN_NORA23 WMT_PIN(5, 23)
+#define WMT_PIN_NORA24 WMT_PIN(5, 24)
+#define WMT_PIN_AC97SDI WMT_PIN(6, 0)
+#define WMT_PIN_AC97SYNC WMT_PIN(6, 1)
+#define WMT_PIN_AC97SDO WMT_PIN(6, 2)
+#define WMT_PIN_AC97BCLK WMT_PIN(6, 3)
+#define WMT_PIN_AC97RST WMT_PIN(6, 4)
+#define WMT_PIN_SFDO WMT_PIN(7, 0)
+#define WMT_PIN_SFCS0 WMT_PIN(7, 1)
+#define WMT_PIN_SFCS1 WMT_PIN(7, 2)
+#define WMT_PIN_SFCLK WMT_PIN(7, 3)
+#define WMT_PIN_SFDI WMT_PIN(7, 4)
+#define WMT_PIN_SPI0CLK WMT_PIN(8, 0)
+#define WMT_PIN_SPI0MISO WMT_PIN(8, 1)
+#define WMT_PIN_SPI0MOSI WMT_PIN(8, 2)
+#define WMT_PIN_SPI0SS WMT_PIN(8, 3)
+#define WMT_PIN_SPI1CLK WMT_PIN(8, 4)
+#define WMT_PIN_SPI1MISO WMT_PIN(8, 5)
+#define WMT_PIN_SPI1MOSI WMT_PIN(8, 6)
+#define WMT_PIN_SPI1SS WMT_PIN(8, 7)
+#define WMT_PIN_SPI2CLK WMT_PIN(8, 8)
+#define WMT_PIN_SPI2MISO WMT_PIN(8, 9)
+#define WMT_PIN_SPI2MOSI WMT_PIN(8, 10)
+#define WMT_PIN_SPI2SS WMT_PIN(8, 11)
+#define WMT_PIN_UART0_RTS WMT_PIN(9, 0)
+#define WMT_PIN_UART0_TXD WMT_PIN(9, 1)
+#define WMT_PIN_UART0_CTS WMT_PIN(9, 2)
+#define WMT_PIN_UART0_RXD WMT_PIN(9, 3)
+#define WMT_PIN_UART1_RTS WMT_PIN(9, 4)
+#define WMT_PIN_UART1_TXD WMT_PIN(9, 5)
+#define WMT_PIN_UART1_CTS WMT_PIN(9, 6)
+#define WMT_PIN_UART1_RXD WMT_PIN(9, 7)
+#define WMT_PIN_UART2_RTS WMT_PIN(9, 8)
+#define WMT_PIN_UART2_TXD WMT_PIN(9, 9)
+#define WMT_PIN_UART2_CTS WMT_PIN(9, 10)
+#define WMT_PIN_UART2_RXD WMT_PIN(9, 11)
+#define WMT_PIN_UART3_RTS WMT_PIN(9, 12)
+#define WMT_PIN_UART3_TXD WMT_PIN(9, 13)
+#define WMT_PIN_UART3_CTS WMT_PIN(9, 14)
+#define WMT_PIN_UART3_RXD WMT_PIN(9, 15)
+#define WMT_PIN_I2C0SCL WMT_PIN(10, 0)
+#define WMT_PIN_I2C0SDA WMT_PIN(10, 1)
+#define WMT_PIN_I2C1SCL WMT_PIN(10, 2)
+#define WMT_PIN_I2C1SDA WMT_PIN(10, 3)
+#define WMT_PIN_I2C2SCL WMT_PIN(10, 4)
+#define WMT_PIN_I2C2SDA WMT_PIN(10, 5)
+
+static const struct pinctrl_pin_desc wm8505_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP2, "wakeup2"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP3, "wakeup3"),
+ PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"),
+ PINCTRL_PIN(WMT_PIN_SDDATA0, "sd_data0"),
+ PINCTRL_PIN(WMT_PIN_SDDATA1, "sd_data1"),
+ PINCTRL_PIN(WMT_PIN_SDDATA2, "sd_data2"),
+ PINCTRL_PIN(WMT_PIN_SDDATA3, "sd_data3"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA0, "mmc_data0"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA1, "mmc_data1"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA2, "mmc_data2"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA3, "mmc_data3"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"),
+ PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"),
+ PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"),
+ PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"),
+ PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"),
+ PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"),
+ PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"),
+ PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"),
+ PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"),
+ PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"),
+ PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"),
+ PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"),
+ PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"),
+ PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"),
+ PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"),
+ PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"),
+ PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"),
+ PINCTRL_PIN(WMT_PIN_VHSYNC, "v_hsync"),
+ PINCTRL_PIN(WMT_PIN_VVSYNC, "v_vsync"),
+ PINCTRL_PIN(WMT_PIN_VGAHSYNC, "vga_hsync"),
+ PINCTRL_PIN(WMT_PIN_VGAVSYNC, "vga_vsync"),
+ PINCTRL_PIN(WMT_PIN_VDHSYNC, "vd_hsync"),
+ PINCTRL_PIN(WMT_PIN_VDVSYNC, "vd_vsync"),
+ PINCTRL_PIN(WMT_PIN_NORD0, "nor_d0"),
+ PINCTRL_PIN(WMT_PIN_NORD1, "nor_d1"),
+ PINCTRL_PIN(WMT_PIN_NORD2, "nor_d2"),
+ PINCTRL_PIN(WMT_PIN_NORD3, "nor_d3"),
+ PINCTRL_PIN(WMT_PIN_NORD4, "nor_d4"),
+ PINCTRL_PIN(WMT_PIN_NORD5, "nor_d5"),
+ PINCTRL_PIN(WMT_PIN_NORD6, "nor_d6"),
+ PINCTRL_PIN(WMT_PIN_NORD7, "nor_d7"),
+ PINCTRL_PIN(WMT_PIN_NORD8, "nor_d8"),
+ PINCTRL_PIN(WMT_PIN_NORD9, "nor_d9"),
+ PINCTRL_PIN(WMT_PIN_NORD10, "nor_d10"),
+ PINCTRL_PIN(WMT_PIN_NORD11, "nor_d11"),
+ PINCTRL_PIN(WMT_PIN_NORD12, "nor_d12"),
+ PINCTRL_PIN(WMT_PIN_NORD13, "nor_d13"),
+ PINCTRL_PIN(WMT_PIN_NORD14, "nor_d14"),
+ PINCTRL_PIN(WMT_PIN_NORD15, "nor_d15"),
+ PINCTRL_PIN(WMT_PIN_NORA0, "nor_a0"),
+ PINCTRL_PIN(WMT_PIN_NORA1, "nor_a1"),
+ PINCTRL_PIN(WMT_PIN_NORA2, "nor_a2"),
+ PINCTRL_PIN(WMT_PIN_NORA3, "nor_a3"),
+ PINCTRL_PIN(WMT_PIN_NORA4, "nor_a4"),
+ PINCTRL_PIN(WMT_PIN_NORA5, "nor_a5"),
+ PINCTRL_PIN(WMT_PIN_NORA6, "nor_a6"),
+ PINCTRL_PIN(WMT_PIN_NORA7, "nor_a7"),
+ PINCTRL_PIN(WMT_PIN_NORA8, "nor_a8"),
+ PINCTRL_PIN(WMT_PIN_NORA9, "nor_a9"),
+ PINCTRL_PIN(WMT_PIN_NORA10, "nor_a10"),
+ PINCTRL_PIN(WMT_PIN_NORA11, "nor_a11"),
+ PINCTRL_PIN(WMT_PIN_NORA12, "nor_a12"),
+ PINCTRL_PIN(WMT_PIN_NORA13, "nor_a13"),
+ PINCTRL_PIN(WMT_PIN_NORA14, "nor_a14"),
+ PINCTRL_PIN(WMT_PIN_NORA15, "nor_a15"),
+ PINCTRL_PIN(WMT_PIN_NORA16, "nor_a16"),
+ PINCTRL_PIN(WMT_PIN_NORA17, "nor_a17"),
+ PINCTRL_PIN(WMT_PIN_NORA18, "nor_a18"),
+ PINCTRL_PIN(WMT_PIN_NORA19, "nor_a19"),
+ PINCTRL_PIN(WMT_PIN_NORA20, "nor_a20"),
+ PINCTRL_PIN(WMT_PIN_NORA21, "nor_a21"),
+ PINCTRL_PIN(WMT_PIN_NORA22, "nor_a22"),
+ PINCTRL_PIN(WMT_PIN_NORA23, "nor_a23"),
+ PINCTRL_PIN(WMT_PIN_NORA24, "nor_a24"),
+ PINCTRL_PIN(WMT_PIN_AC97SDI, "ac97_sdi"),
+ PINCTRL_PIN(WMT_PIN_AC97SYNC, "ac97_sync"),
+ PINCTRL_PIN(WMT_PIN_AC97SDO, "ac97_sdo"),
+ PINCTRL_PIN(WMT_PIN_AC97BCLK, "ac97_bclk"),
+ PINCTRL_PIN(WMT_PIN_AC97RST, "ac97_rst"),
+ PINCTRL_PIN(WMT_PIN_SFDO, "sf_do"),
+ PINCTRL_PIN(WMT_PIN_SFCS0, "sf_cs0"),
+ PINCTRL_PIN(WMT_PIN_SFCS1, "sf_cs1"),
+ PINCTRL_PIN(WMT_PIN_SFCLK, "sf_clk"),
+ PINCTRL_PIN(WMT_PIN_SFDI, "sf_di"),
+ PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS, "spi0_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI1CLK, "spi1_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI1MISO, "spi1_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI1MOSI, "spi1_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI1SS, "spi1_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI2CLK, "spi2_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI2MISO, "spi2_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI2MOSI, "spi2_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI2SS, "spi2_ss"),
+ PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"),
+ PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"),
+ PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"),
+ PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART3_RTS, "uart3_rts"),
+ PINCTRL_PIN(WMT_PIN_UART3_TXD, "uart3_txd"),
+ PINCTRL_PIN(WMT_PIN_UART3_CTS, "uart3_cts"),
+ PINCTRL_PIN(WMT_PIN_UART3_RXD, "uart3_rxd"),
+ PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C2SCL, "i2c2_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C2SDA, "i2c2_sda"),
+};
+
+/* Order of these names must match the above list */
+static const char * const wm8505_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "wakeup0",
+ "wakeup1",
+ "wakeup2",
+ "wakeup3",
+ "susgpio0",
+ "sd_data0",
+ "sd_data1",
+ "sd_data2",
+ "sd_data3",
+ "mmc_data0",
+ "mmc_data1",
+ "mmc_data2",
+ "mmc_data3",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "vdout6",
+ "vdout7",
+ "vdout8",
+ "vdout9",
+ "vdout10",
+ "vdout11",
+ "vdout12",
+ "vdout13",
+ "vdout14",
+ "vdout15",
+ "vdout16",
+ "vdout17",
+ "vdout18",
+ "vdout19",
+ "vdout20",
+ "vdout21",
+ "vdout22",
+ "vdout23",
+ "v_hsync",
+ "v_vsync",
+ "vga_hsync",
+ "vga_vsync",
+ "vd_hsync",
+ "vd_vsync",
+ "nor_d0",
+ "nor_d1",
+ "nor_d2",
+ "nor_d3",
+ "nor_d4",
+ "nor_d5",
+ "nor_d6",
+ "nor_d7",
+ "nor_d8",
+ "nor_d9",
+ "nor_d10",
+ "nor_d11",
+ "nor_d12",
+ "nor_d13",
+ "nor_d14",
+ "nor_d15",
+ "nor_a0",
+ "nor_a1",
+ "nor_a2",
+ "nor_a3",
+ "nor_a4",
+ "nor_a5",
+ "nor_a6",
+ "nor_a7",
+ "nor_a8",
+ "nor_a9",
+ "nor_a10",
+ "nor_a11",
+ "nor_a12",
+ "nor_a13",
+ "nor_a14",
+ "nor_a15",
+ "nor_a16",
+ "nor_a17",
+ "nor_a18",
+ "nor_a19",
+ "nor_a20",
+ "nor_a21",
+ "nor_a22",
+ "nor_a23",
+ "nor_a24",
+ "ac97_sdi",
+ "ac97_sync",
+ "ac97_sdo",
+ "ac97_bclk",
+ "ac97_rst",
+ "sf_do",
+ "sf_cs0",
+ "sf_cs1",
+ "sf_clk",
+ "sf_di",
+ "spi0_clk",
+ "spi0_miso",
+ "spi0_mosi",
+ "spi0_ss",
+ "spi1_clk",
+ "spi1_miso",
+ "spi1_mosi",
+ "spi1_ss",
+ "spi2_clk",
+ "spi2_miso",
+ "spi2_mosi",
+ "spi2_ss",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "uart2_rts",
+ "uart2_txd",
+ "uart2_cts",
+ "uart2_rxd",
+ "uart3_rts",
+ "uart3_txd",
+ "uart3_cts",
+ "uart3_rxd",
+ "i2c0_scl",
+ "i2c0_sda",
+ "i2c1_scl",
+ "i2c1_sda",
+ "i2c2_scl",
+ "i2c2_sda",
+};
+
+static int wm8505_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = wm8505_banks;
+ data->nbanks = ARRAY_SIZE(wm8505_banks);
+ data->pins = wm8505_pins;
+ data->npins = ARRAY_SIZE(wm8505_pins);
+ data->groups = wm8505_groups;
+ data->ngroups = ARRAY_SIZE(wm8505_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int wm8505_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "wm,wm8505-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = wm8505_pinctrl_probe,
+ .remove = wm8505_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-wm8505",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("Wondermedia WM8505 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
--- /dev/null
+/*
+ * Pinctrl data for Wondermedia WM8650 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers wm8650_banks[] = {
+ WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */
+ WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */
+ WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */
+ WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */
+ WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */
+ WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */
+ WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */
+ WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17)
+#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21)
+#define WMT_PIN_SD0CD WMT_PIN(0, 28)
+#define WMT_PIN_SD1CD WMT_PIN(0, 29)
+#define WMT_PIN_VDOUT0 WMT_PIN(1, 0)
+#define WMT_PIN_VDOUT1 WMT_PIN(1, 1)
+#define WMT_PIN_VDOUT2 WMT_PIN(1, 2)
+#define WMT_PIN_VDOUT3 WMT_PIN(1, 3)
+#define WMT_PIN_VDOUT4 WMT_PIN(1, 4)
+#define WMT_PIN_VDOUT5 WMT_PIN(1, 5)
+#define WMT_PIN_VDOUT6 WMT_PIN(1, 6)
+#define WMT_PIN_VDOUT7 WMT_PIN(1, 7)
+#define WMT_PIN_VDOUT8 WMT_PIN(1, 8)
+#define WMT_PIN_VDOUT9 WMT_PIN(1, 9)
+#define WMT_PIN_VDOUT10 WMT_PIN(1, 10)
+#define WMT_PIN_VDOUT11 WMT_PIN(1, 11)
+#define WMT_PIN_VDOUT12 WMT_PIN(1, 12)
+#define WMT_PIN_VDOUT13 WMT_PIN(1, 13)
+#define WMT_PIN_VDOUT14 WMT_PIN(1, 14)
+#define WMT_PIN_VDOUT15 WMT_PIN(1, 15)
+#define WMT_PIN_VDOUT16 WMT_PIN(1, 16)
+#define WMT_PIN_VDOUT17 WMT_PIN(1, 17)
+#define WMT_PIN_VDOUT18 WMT_PIN(1, 18)
+#define WMT_PIN_VDOUT19 WMT_PIN(1, 19)
+#define WMT_PIN_VDOUT20 WMT_PIN(1, 20)
+#define WMT_PIN_VDOUT21 WMT_PIN(1, 21)
+#define WMT_PIN_VDOUT22 WMT_PIN(1, 22)
+#define WMT_PIN_VDOUT23 WMT_PIN(1, 23)
+#define WMT_PIN_VDIN0 WMT_PIN(2, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(2, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(2, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(2, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(2, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(2, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(2, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(2, 7)
+#define WMT_PIN_I2C1SCL WMT_PIN(2, 12)
+#define WMT_PIN_I2C1SDA WMT_PIN(2, 13)
+#define WMT_PIN_SPI0MOSI WMT_PIN(2, 24)
+#define WMT_PIN_SPI0MISO WMT_PIN(2, 25)
+#define WMT_PIN_SPI0SS0 WMT_PIN(2, 26)
+#define WMT_PIN_SPI0CLK WMT_PIN(2, 27)
+#define WMT_PIN_SD0DATA0 WMT_PIN(3, 8)
+#define WMT_PIN_SD0DATA1 WMT_PIN(3, 9)
+#define WMT_PIN_SD0DATA2 WMT_PIN(3, 10)
+#define WMT_PIN_SD0DATA3 WMT_PIN(3, 11)
+#define WMT_PIN_SD0CLK WMT_PIN(3, 12)
+#define WMT_PIN_SD0WP WMT_PIN(3, 13)
+#define WMT_PIN_SD0CMD WMT_PIN(3, 14)
+#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24)
+#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25)
+#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26)
+#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27)
+#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28)
+#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29)
+#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30)
+#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31)
+#define WMT_PIN_I2C0SCL WMT_PIN(5, 8)
+#define WMT_PIN_I2C0SDA WMT_PIN(5, 9)
+#define WMT_PIN_UART0RTS WMT_PIN(5, 16)
+#define WMT_PIN_UART0TXD WMT_PIN(5, 17)
+#define WMT_PIN_UART0CTS WMT_PIN(5, 18)
+#define WMT_PIN_UART0RXD WMT_PIN(5, 19)
+#define WMT_PIN_UART1RTS WMT_PIN(5, 20)
+#define WMT_PIN_UART1TXD WMT_PIN(5, 21)
+#define WMT_PIN_UART1CTS WMT_PIN(5, 22)
+#define WMT_PIN_UART1RXD WMT_PIN(5, 23)
+#define WMT_PIN_UART2RTS WMT_PIN(5, 24)
+#define WMT_PIN_UART2TXD WMT_PIN(5, 25)
+#define WMT_PIN_UART2CTS WMT_PIN(5, 26)
+#define WMT_PIN_UART2RXD WMT_PIN(5, 27)
+#define WMT_PIN_UART3RTS WMT_PIN(5, 28)
+#define WMT_PIN_UART3TXD WMT_PIN(5, 29)
+#define WMT_PIN_UART3CTS WMT_PIN(5, 30)
+#define WMT_PIN_UART3RXD WMT_PIN(5, 31)
+#define WMT_PIN_KPADROW0 WMT_PIN(6, 16)
+#define WMT_PIN_KPADROW1 WMT_PIN(6, 17)
+#define WMT_PIN_KPADCOL0 WMT_PIN(6, 18)
+#define WMT_PIN_KPADCOL1 WMT_PIN(6, 19)
+#define WMT_PIN_SD1CLK WMT_PIN(7, 0)
+#define WMT_PIN_SD1CMD WMT_PIN(7, 1)
+#define WMT_PIN_SD1WP WMT_PIN(7, 13)
+
+static const struct pinctrl_pin_desc wm8650_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
+ PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"),
+ PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"),
+ PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"),
+ PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"),
+ PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"),
+ PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"),
+ PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"),
+ PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"),
+ PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"),
+ PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"),
+ PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"),
+ PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"),
+ PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"),
+ PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"),
+ PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"),
+ PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"),
+ PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"),
+ PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"),
+ PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS0, "spi0_ss0"),
+ PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"),
+ PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"),
+ PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"),
+ PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"),
+ PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_UART0RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART2RTS, "uart2_rts"),
+ PINCTRL_PIN(WMT_PIN_UART2TXD, "uart2_txd"),
+ PINCTRL_PIN(WMT_PIN_UART2CTS, "uart2_cts"),
+ PINCTRL_PIN(WMT_PIN_UART2RXD, "uart2_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART3RTS, "uart3_rts"),
+ PINCTRL_PIN(WMT_PIN_UART3TXD, "uart3_txd"),
+ PINCTRL_PIN(WMT_PIN_UART3CTS, "uart3_cts"),
+ PINCTRL_PIN(WMT_PIN_UART3RXD, "uart3_rxd"),
+ PINCTRL_PIN(WMT_PIN_KPADROW0, "kpadrow0"),
+ PINCTRL_PIN(WMT_PIN_KPADROW1, "kpadrow1"),
+ PINCTRL_PIN(WMT_PIN_KPADCOL0, "kpadcol0"),
+ PINCTRL_PIN(WMT_PIN_KPADCOL1, "kpadcol1"),
+ PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"),
+ PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"),
+};
+
+/* Order of these names must match the above list */
+static const char * const wm8650_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "wakeup0",
+ "wakeup1",
+ "susgpio0",
+ "sd0_cd",
+ "sd1_cd",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "vdout6",
+ "vdout7",
+ "vdout8",
+ "vdout9",
+ "vdout10",
+ "vdout11",
+ "vdout12",
+ "vdout13",
+ "vdout14",
+ "vdout15",
+ "vdout16",
+ "vdout17",
+ "vdout18",
+ "vdout19",
+ "vdout20",
+ "vdout21",
+ "vdout22",
+ "vdout23",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "i2c1_scl",
+ "i2c1_sda",
+ "spi0_mosi",
+ "spi0_miso",
+ "spi0_ss0",
+ "spi0_clk",
+ "sd0_data0",
+ "sd0_data1",
+ "sd0_data2",
+ "sd0_data3",
+ "sd0_clk",
+ "sd0_wp",
+ "sd0_cmd",
+ "sd1_data0",
+ "sd1_data1",
+ "sd1_data2",
+ "sd1_data3",
+ "sd1_data4",
+ "sd1_data5",
+ "sd1_data6",
+ "sd1_data7",
+ "i2c0_scl",
+ "i2c0_sda",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "uart2_rts",
+ "uart2_txd",
+ "uart2_cts",
+ "uart2_rxd",
+ "uart3_rts",
+ "uart3_txd",
+ "uart3_cts",
+ "uart3_rxd",
+ "kpadrow0",
+ "kpadrow1",
+ "kpadcol0",
+ "kpadcol1",
+ "sd1_clk",
+ "sd1_cmd",
+ "sd1_wp",
+};
+
+static int wm8650_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = wm8650_banks;
+ data->nbanks = ARRAY_SIZE(wm8650_banks);
+ data->pins = wm8650_pins;
+ data->npins = ARRAY_SIZE(wm8650_pins);
+ data->groups = wm8650_groups;
+ data->ngroups = ARRAY_SIZE(wm8650_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int wm8650_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "wm,wm8650-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = wm8650_pinctrl_probe,
+ .remove = wm8650_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-wm8650",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("Wondermedia WM8650 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
--- /dev/null
+/*
+ * Pinctrl data for Wondermedia WM8750 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers wm8750_banks[] = {
+ WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */
+ WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */
+ WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */
+ WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */
+ WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */
+ WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */
+ WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */
+ WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */
+ WMT_PINCTRL_BANK(0x60, 0xA0, 0xE0, 0x20, 0x4A0, 0x4E0), /* 8 */
+ WMT_PINCTRL_BANK(0x70, 0xB0, 0xF0, 0x30, 0x4B0, 0x4F0), /* 9 */
+ WMT_PINCTRL_BANK(0x7C, 0xBC, 0xDC, 0x3C, 0x4BC, 0x4FC), /* 10 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 16)
+#define WMT_PIN_SD0CD WMT_PIN(0, 28)
+#define WMT_PIN_VDOUT0 WMT_PIN(1, 0)
+#define WMT_PIN_VDOUT1 WMT_PIN(1, 1)
+#define WMT_PIN_VDOUT2 WMT_PIN(1, 2)
+#define WMT_PIN_VDOUT3 WMT_PIN(1, 3)
+#define WMT_PIN_VDOUT4 WMT_PIN(1, 4)
+#define WMT_PIN_VDOUT5 WMT_PIN(1, 5)
+#define WMT_PIN_VDOUT6 WMT_PIN(1, 6)
+#define WMT_PIN_VDOUT7 WMT_PIN(1, 7)
+#define WMT_PIN_VDOUT8 WMT_PIN(1, 8)
+#define WMT_PIN_VDOUT9 WMT_PIN(1, 9)
+#define WMT_PIN_VDOUT10 WMT_PIN(1, 10)
+#define WMT_PIN_VDOUT11 WMT_PIN(1, 11)
+#define WMT_PIN_VDOUT12 WMT_PIN(1, 12)
+#define WMT_PIN_VDOUT13 WMT_PIN(1, 13)
+#define WMT_PIN_VDOUT14 WMT_PIN(1, 14)
+#define WMT_PIN_VDOUT15 WMT_PIN(1, 15)
+#define WMT_PIN_VDOUT16 WMT_PIN(1, 16)
+#define WMT_PIN_VDOUT17 WMT_PIN(1, 17)
+#define WMT_PIN_VDOUT18 WMT_PIN(1, 18)
+#define WMT_PIN_VDOUT19 WMT_PIN(1, 19)
+#define WMT_PIN_VDOUT20 WMT_PIN(1, 20)
+#define WMT_PIN_VDOUT21 WMT_PIN(1, 21)
+#define WMT_PIN_VDOUT22 WMT_PIN(1, 22)
+#define WMT_PIN_VDOUT23 WMT_PIN(1, 23)
+#define WMT_PIN_VDIN0 WMT_PIN(2, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(2, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(2, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(2, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(2, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(2, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(2, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(2, 7)
+#define WMT_PIN_SPI0_MOSI WMT_PIN(2, 24)
+#define WMT_PIN_SPI0_MISO WMT_PIN(2, 25)
+#define WMT_PIN_SPI0_SS WMT_PIN(2, 26)
+#define WMT_PIN_SPI0_CLK WMT_PIN(2, 27)
+#define WMT_PIN_SPI0_SSB WMT_PIN(2, 28)
+#define WMT_PIN_SD0CLK WMT_PIN(3, 17)
+#define WMT_PIN_SD0CMD WMT_PIN(3, 18)
+#define WMT_PIN_SD0WP WMT_PIN(3, 19)
+#define WMT_PIN_SD0DATA0 WMT_PIN(3, 20)
+#define WMT_PIN_SD0DATA1 WMT_PIN(3, 21)
+#define WMT_PIN_SD0DATA2 WMT_PIN(3, 22)
+#define WMT_PIN_SD0DATA3 WMT_PIN(3, 23)
+#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24)
+#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25)
+#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26)
+#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27)
+#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28)
+#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29)
+#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30)
+#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31)
+#define WMT_PIN_I2C0_SCL WMT_PIN(5, 8)
+#define WMT_PIN_I2C0_SDA WMT_PIN(5, 9)
+#define WMT_PIN_I2C1_SCL WMT_PIN(5, 10)
+#define WMT_PIN_I2C1_SDA WMT_PIN(5, 11)
+#define WMT_PIN_I2C2_SCL WMT_PIN(5, 12)
+#define WMT_PIN_I2C2_SDA WMT_PIN(5, 13)
+#define WMT_PIN_UART0_RTS WMT_PIN(5, 16)
+#define WMT_PIN_UART0_TXD WMT_PIN(5, 17)
+#define WMT_PIN_UART0_CTS WMT_PIN(5, 18)
+#define WMT_PIN_UART0_RXD WMT_PIN(5, 19)
+#define WMT_PIN_UART1_RTS WMT_PIN(5, 20)
+#define WMT_PIN_UART1_TXD WMT_PIN(5, 21)
+#define WMT_PIN_UART1_CTS WMT_PIN(5, 22)
+#define WMT_PIN_UART1_RXD WMT_PIN(5, 23)
+#define WMT_PIN_UART2_RTS WMT_PIN(5, 24)
+#define WMT_PIN_UART2_TXD WMT_PIN(5, 25)
+#define WMT_PIN_UART2_CTS WMT_PIN(5, 26)
+#define WMT_PIN_UART2_RXD WMT_PIN(5, 27)
+#define WMT_PIN_UART3_RTS WMT_PIN(5, 28)
+#define WMT_PIN_UART3_TXD WMT_PIN(5, 29)
+#define WMT_PIN_UART3_CTS WMT_PIN(5, 30)
+#define WMT_PIN_UART3_RXD WMT_PIN(5, 31)
+#define WMT_PIN_SD2CD WMT_PIN(6, 0)
+#define WMT_PIN_SD2DATA3 WMT_PIN(6, 1)
+#define WMT_PIN_SD2DATA0 WMT_PIN(6, 2)
+#define WMT_PIN_SD2WP WMT_PIN(6, 3)
+#define WMT_PIN_SD2DATA1 WMT_PIN(6, 4)
+#define WMT_PIN_SD2DATA2 WMT_PIN(6, 5)
+#define WMT_PIN_SD2CMD WMT_PIN(6, 6)
+#define WMT_PIN_SD2CLK WMT_PIN(6, 7)
+#define WMT_PIN_SD2PWR WMT_PIN(6, 9)
+#define WMT_PIN_SD1CLK WMT_PIN(7, 0)
+#define WMT_PIN_SD1CMD WMT_PIN(7, 1)
+#define WMT_PIN_SD1PWR WMT_PIN(7, 10)
+#define WMT_PIN_SD1WP WMT_PIN(7, 11)
+#define WMT_PIN_SD1CD WMT_PIN(7, 12)
+#define WMT_PIN_SPI0SS3 WMT_PIN(7, 24)
+#define WMT_PIN_SPI0SS2 WMT_PIN(7, 25)
+#define WMT_PIN_PWMOUT1 WMT_PIN(7, 26)
+#define WMT_PIN_PWMOUT0 WMT_PIN(7, 27)
+
+static const struct pinctrl_pin_desc wm8750_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
+ PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"),
+ PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"),
+ PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"),
+ PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"),
+ PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"),
+ PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"),
+ PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"),
+ PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"),
+ PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"),
+ PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"),
+ PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"),
+ PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"),
+ PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"),
+ PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"),
+ PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"),
+ PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"),
+ PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_SPI0_MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI0_MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0_SS, "spi0_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI0_CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI0_SSB, "spi0_ssb"),
+ PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"),
+ PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"),
+ PINCTRL_PIN(WMT_PIN_I2C0_SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0_SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C1_SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1_SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C2_SCL, "i2c2_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C2_SDA, "i2c2_sda"),
+ PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"),
+ PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"),
+ PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"),
+ PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART3_RTS, "uart3_rts"),
+ PINCTRL_PIN(WMT_PIN_UART3_TXD, "uart3_txd"),
+ PINCTRL_PIN(WMT_PIN_UART3_CTS, "uart3_cts"),
+ PINCTRL_PIN(WMT_PIN_UART3_RXD, "uart3_rxd"),
+ PINCTRL_PIN(WMT_PIN_SD2CD, "sd2_cd"),
+ PINCTRL_PIN(WMT_PIN_SD2DATA3, "sd2_data3"),
+ PINCTRL_PIN(WMT_PIN_SD2DATA0, "sd2_data0"),
+ PINCTRL_PIN(WMT_PIN_SD2WP, "sd2_wp"),
+ PINCTRL_PIN(WMT_PIN_SD2DATA1, "sd2_data1"),
+ PINCTRL_PIN(WMT_PIN_SD2DATA2, "sd2_data2"),
+ PINCTRL_PIN(WMT_PIN_SD2CMD, "sd2_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD2CLK, "sd2_clk"),
+ PINCTRL_PIN(WMT_PIN_SD2PWR, "sd2_pwr"),
+ PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"),
+ PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD1PWR, "sd1_pwr"),
+ PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"),
+ PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS3, "spi0_ss3"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS2, "spi0_ss2"),
+ PINCTRL_PIN(WMT_PIN_PWMOUT1, "pwmout1"),
+ PINCTRL_PIN(WMT_PIN_PWMOUT0, "pwmout0"),
+};
+
+/* Order of these names must match the above list */
+static const char * const wm8750_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "wakeup0",
+ "wakeup1",
+ "sd0_cd",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "vdout6",
+ "vdout7",
+ "vdout8",
+ "vdout9",
+ "vdout10",
+ "vdout11",
+ "vdout12",
+ "vdout13",
+ "vdout14",
+ "vdout15",
+ "vdout16",
+ "vdout17",
+ "vdout18",
+ "vdout19",
+ "vdout20",
+ "vdout21",
+ "vdout22",
+ "vdout23",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "spi0_mosi",
+ "spi0_miso",
+ "spi0_ss",
+ "spi0_clk",
+ "spi0_ssb",
+ "sd0_clk",
+ "sd0_cmd",
+ "sd0_wp",
+ "sd0_data0",
+ "sd0_data1",
+ "sd0_data2",
+ "sd0_data3",
+ "sd1_data0",
+ "sd1_data1",
+ "sd1_data2",
+ "sd1_data3",
+ "sd1_data4",
+ "sd1_data5",
+ "sd1_data6",
+ "sd1_data7",
+ "i2c0_scl",
+ "i2c0_sda",
+ "i2c1_scl",
+ "i2c1_sda",
+ "i2c2_scl",
+ "i2c2_sda",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "uart2_rts",
+ "uart2_txd",
+ "uart2_cts",
+ "uart2_rxd",
+ "uart3_rts",
+ "uart3_txd",
+ "uart3_cts",
+ "uart3_rxd",
+ "sd2_cd",
+ "sd2_data3",
+ "sd2_data0",
+ "sd2_wp",
+ "sd2_data1",
+ "sd2_data2",
+ "sd2_cmd",
+ "sd2_clk",
+ "sd2_pwr",
+ "sd1_clk",
+ "sd1_cmd",
+ "sd1_pwr",
+ "sd1_wp",
+ "sd1_cd",
+ "spi0_ss3",
+ "spi0_ss2",
+ "pwmout1",
+ "pwmout0",
+};
+
+static int wm8750_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = wm8750_banks;
+ data->nbanks = ARRAY_SIZE(wm8750_banks);
+ data->pins = wm8750_pins;
+ data->npins = ARRAY_SIZE(wm8750_pins);
+ data->groups = wm8750_groups;
+ data->ngroups = ARRAY_SIZE(wm8750_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int wm8750_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "wm,wm8750-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = wm8750_pinctrl_probe,
+ .remove = wm8750_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-wm8750",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("Wondermedia WM8750 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
--- /dev/null
+/*
+ * Pinctrl data for Wondermedia WM8850 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers wm8850_banks[] = {
+ WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */
+ WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */
+ WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */
+ WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */
+ WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */
+ WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */
+ WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */
+ WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */
+ WMT_PINCTRL_BANK(0x60, 0xA0, 0xE0, 0x20, 0x4A0, 0x4E0), /* 8 */
+ WMT_PINCTRL_BANK(0x70, 0xB0, 0xF0, 0x30, 0x4B0, 0x4F0), /* 9 */
+ WMT_PINCTRL_BANK(0x7C, 0xBC, 0xDC, 0x3C, 0x4BC, 0x4FC), /* 10 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17)
+#define WMT_PIN_WAKEUP2 WMT_PIN(0, 18)
+#define WMT_PIN_WAKEUP3 WMT_PIN(0, 19)
+#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21)
+#define WMT_PIN_SUSGPIO1 WMT_PIN(0, 22)
+#define WMT_PIN_SD0CD WMT_PIN(0, 28)
+#define WMT_PIN_VDOUT0 WMT_PIN(1, 0)
+#define WMT_PIN_VDOUT1 WMT_PIN(1, 1)
+#define WMT_PIN_VDOUT2 WMT_PIN(1, 2)
+#define WMT_PIN_VDOUT3 WMT_PIN(1, 3)
+#define WMT_PIN_VDOUT4 WMT_PIN(1, 4)
+#define WMT_PIN_VDOUT5 WMT_PIN(1, 5)
+#define WMT_PIN_VDOUT6 WMT_PIN(1, 6)
+#define WMT_PIN_VDOUT7 WMT_PIN(1, 7)
+#define WMT_PIN_VDOUT8 WMT_PIN(1, 8)
+#define WMT_PIN_VDOUT9 WMT_PIN(1, 9)
+#define WMT_PIN_VDOUT10 WMT_PIN(1, 10)
+#define WMT_PIN_VDOUT11 WMT_PIN(1, 11)
+#define WMT_PIN_VDOUT12 WMT_PIN(1, 12)
+#define WMT_PIN_VDOUT13 WMT_PIN(1, 13)
+#define WMT_PIN_VDOUT14 WMT_PIN(1, 14)
+#define WMT_PIN_VDOUT15 WMT_PIN(1, 15)
+#define WMT_PIN_VDOUT16 WMT_PIN(1, 16)
+#define WMT_PIN_VDOUT17 WMT_PIN(1, 17)
+#define WMT_PIN_VDOUT18 WMT_PIN(1, 18)
+#define WMT_PIN_VDOUT19 WMT_PIN(1, 19)
+#define WMT_PIN_VDOUT20 WMT_PIN(1, 20)
+#define WMT_PIN_VDOUT21 WMT_PIN(1, 21)
+#define WMT_PIN_VDOUT22 WMT_PIN(1, 22)
+#define WMT_PIN_VDOUT23 WMT_PIN(1, 23)
+#define WMT_PIN_VDIN0 WMT_PIN(2, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(2, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(2, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(2, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(2, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(2, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(2, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(2, 7)
+#define WMT_PIN_SPI0_MOSI WMT_PIN(2, 24)
+#define WMT_PIN_SPI0_MISO WMT_PIN(2, 25)
+#define WMT_PIN_SPI0_SS WMT_PIN(2, 26)
+#define WMT_PIN_SPI0_CLK WMT_PIN(2, 27)
+#define WMT_PIN_SPI0_SSB WMT_PIN(2, 28)
+#define WMT_PIN_SD0CLK WMT_PIN(3, 17)
+#define WMT_PIN_SD0CMD WMT_PIN(3, 18)
+#define WMT_PIN_SD0WP WMT_PIN(3, 19)
+#define WMT_PIN_SD0DATA0 WMT_PIN(3, 20)
+#define WMT_PIN_SD0DATA1 WMT_PIN(3, 21)
+#define WMT_PIN_SD0DATA2 WMT_PIN(3, 22)
+#define WMT_PIN_SD0DATA3 WMT_PIN(3, 23)
+#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24)
+#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25)
+#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26)
+#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27)
+#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28)
+#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29)
+#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30)
+#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31)
+#define WMT_PIN_I2C0_SCL WMT_PIN(5, 8)
+#define WMT_PIN_I2C0_SDA WMT_PIN(5, 9)
+#define WMT_PIN_I2C1_SCL WMT_PIN(5, 10)
+#define WMT_PIN_I2C1_SDA WMT_PIN(5, 11)
+#define WMT_PIN_I2C2_SCL WMT_PIN(5, 12)
+#define WMT_PIN_I2C2_SDA WMT_PIN(5, 13)
+#define WMT_PIN_UART0_RTS WMT_PIN(5, 16)
+#define WMT_PIN_UART0_TXD WMT_PIN(5, 17)
+#define WMT_PIN_UART0_CTS WMT_PIN(5, 18)
+#define WMT_PIN_UART0_RXD WMT_PIN(5, 19)
+#define WMT_PIN_UART1_RTS WMT_PIN(5, 20)
+#define WMT_PIN_UART1_TXD WMT_PIN(5, 21)
+#define WMT_PIN_UART1_CTS WMT_PIN(5, 22)
+#define WMT_PIN_UART1_RXD WMT_PIN(5, 23)
+#define WMT_PIN_UART2_RTS WMT_PIN(5, 24)
+#define WMT_PIN_UART2_TXD WMT_PIN(5, 25)
+#define WMT_PIN_UART2_CTS WMT_PIN(5, 26)
+#define WMT_PIN_UART2_RXD WMT_PIN(5, 27)
+#define WMT_PIN_SD2WP WMT_PIN(6, 3)
+#define WMT_PIN_SD2CMD WMT_PIN(6, 6)
+#define WMT_PIN_SD2CLK WMT_PIN(6, 7)
+#define WMT_PIN_SD2PWR WMT_PIN(6, 9)
+#define WMT_PIN_SD1CLK WMT_PIN(7, 0)
+#define WMT_PIN_SD1CMD WMT_PIN(7, 1)
+#define WMT_PIN_SD1PWR WMT_PIN(7, 10)
+#define WMT_PIN_SD1WP WMT_PIN(7, 11)
+#define WMT_PIN_SD1CD WMT_PIN(7, 12)
+#define WMT_PIN_PWMOUT1 WMT_PIN(7, 26)
+#define WMT_PIN_PWMOUT0 WMT_PIN(7, 27)
+
+static const struct pinctrl_pin_desc wm8850_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP2, "wakeup2"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP3, "wakeup3"),
+ PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"),
+ PINCTRL_PIN(WMT_PIN_SUSGPIO1, "susgpio1"),
+ PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"),
+ PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"),
+ PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"),
+ PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"),
+ PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"),
+ PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"),
+ PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"),
+ PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"),
+ PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"),
+ PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"),
+ PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"),
+ PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"),
+ PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"),
+ PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"),
+ PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"),
+ PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"),
+ PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_SPI0_MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI0_MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0_SS, "spi0_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI0_CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI0_SSB, "spi0_ssb"),
+ PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"),
+ PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"),
+ PINCTRL_PIN(WMT_PIN_I2C0_SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0_SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C1_SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1_SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C2_SCL, "i2c2_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C2_SDA, "i2c2_sda"),
+ PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"),
+ PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"),
+ PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"),
+ PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"),
+ PINCTRL_PIN(WMT_PIN_SD2WP, "sd2_wp"),
+ PINCTRL_PIN(WMT_PIN_SD2CMD, "sd2_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD2CLK, "sd2_clk"),
+ PINCTRL_PIN(WMT_PIN_SD2PWR, "sd2_pwr"),
+ PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"),
+ PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD1PWR, "sd1_pwr"),
+ PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"),
+ PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"),
+ PINCTRL_PIN(WMT_PIN_PWMOUT1, "pwmout1"),
+ PINCTRL_PIN(WMT_PIN_PWMOUT0, "pwmout0"),
+};
+
+/* Order of these names must match the above list */
+static const char * const wm8850_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "wakeup0",
+ "wakeup1",
+ "wakeup2",
+ "wakeup3",
+ "susgpio0",
+ "susgpio1",
+ "sd0_cd",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "vdout6",
+ "vdout7",
+ "vdout8",
+ "vdout9",
+ "vdout10",
+ "vdout11",
+ "vdout12",
+ "vdout13",
+ "vdout14",
+ "vdout15",
+ "vdout16",
+ "vdout17",
+ "vdout18",
+ "vdout19",
+ "vdout20",
+ "vdout21",
+ "vdout22",
+ "vdout23",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "spi0_mosi",
+ "spi0_miso",
+ "spi0_ss",
+ "spi0_clk",
+ "spi0_ssb",
+ "sd0_clk",
+ "sd0_cmd",
+ "sd0_wp",
+ "sd0_data0",
+ "sd0_data1",
+ "sd0_data2",
+ "sd0_data3",
+ "sd1_data0",
+ "sd1_data1",
+ "sd1_data2",
+ "sd1_data3",
+ "sd1_data4",
+ "sd1_data5",
+ "sd1_data6",
+ "sd1_data7",
+ "i2c0_scl",
+ "i2c0_sda",
+ "i2c1_scl",
+ "i2c1_sda",
+ "i2c2_scl",
+ "i2c2_sda",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "uart2_rts",
+ "uart2_txd",
+ "uart2_cts",
+ "uart2_rxd",
+ "sd2_wp",
+ "sd2_cmd",
+ "sd2_clk",
+ "sd2_pwr",
+ "sd1_clk",
+ "sd1_cmd",
+ "sd1_pwr",
+ "sd1_wp",
+ "sd1_cd",
+ "pwmout1",
+ "pwmout0",
+};
+
+static int wm8850_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = wm8850_banks;
+ data->nbanks = ARRAY_SIZE(wm8850_banks);
+ data->pins = wm8850_pins;
+ data->npins = ARRAY_SIZE(wm8850_pins);
+ data->groups = wm8850_groups;
+ data->ngroups = ARRAY_SIZE(wm8850_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int wm8850_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "wm,wm8850-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = wm8850_pinctrl_probe,
+ .remove = wm8850_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-wm8850",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("Wondermedia WM8850 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
--- /dev/null
+/*
+ * Pinctrl driver for the Wondermedia SoC's
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+static inline void wmt_setbits(struct wmt_pinctrl_data *data, u32 reg,
+ u32 mask)
+{
+ u32 val;
+
+ val = readl_relaxed(data->base + reg);
+ val |= mask;
+ writel_relaxed(val, data->base + reg);
+}
+
+static inline void wmt_clearbits(struct wmt_pinctrl_data *data, u32 reg,
+ u32 mask)
+{
+ u32 val;
+
+ val = readl_relaxed(data->base + reg);
+ val &= ~mask;
+ writel_relaxed(val, data->base + reg);
+}
+
+enum wmt_func_sel {
+ WMT_FSEL_GPIO_IN = 0,
+ WMT_FSEL_GPIO_OUT = 1,
+ WMT_FSEL_ALT = 2,
+ WMT_FSEL_COUNT = 3,
+};
+
+static const char * const wmt_functions[WMT_FSEL_COUNT] = {
+ [WMT_FSEL_GPIO_IN] = "gpio_in",
+ [WMT_FSEL_GPIO_OUT] = "gpio_out",
+ [WMT_FSEL_ALT] = "alt",
+};
+
+static int wmt_pmx_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ return WMT_FSEL_COUNT;
+}
+
+static const char *wmt_pmx_get_function_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return wmt_functions[selector];
+}
+
+static int wmt_pmx_get_function_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ /* every pin does every function */
+ *groups = data->groups;
+ *num_groups = data->ngroups;
+
+ return 0;
+}
+
+static int wmt_set_pinmux(struct wmt_pinctrl_data *data, unsigned func,
+ unsigned pin)
+{
+ u32 bank = WMT_BANK_FROM_PIN(pin);
+ u32 bit = WMT_BIT_FROM_PIN(pin);
+ u32 reg_en = data->banks[bank].reg_en;
+ u32 reg_dir = data->banks[bank].reg_dir;
+
+ if (reg_dir == NO_REG) {
+ dev_err(data->dev, "pin:%d no direction register defined\n",
+ pin);
+ return -EINVAL;
+ }
+
+ /*
+ * If reg_en == NO_REG, we assume it is a dedicated GPIO and cannot be
+ * disabled (as on VT8500) and that no alternate function is available.
+ */
+ switch (func) {
+ case WMT_FSEL_GPIO_IN:
+ if (reg_en != NO_REG)
+ wmt_setbits(data, reg_en, BIT(bit));
+ wmt_clearbits(data, reg_dir, BIT(bit));
+ break;
+ case WMT_FSEL_GPIO_OUT:
+ if (reg_en != NO_REG)
+ wmt_setbits(data, reg_en, BIT(bit));
+ wmt_setbits(data, reg_dir, BIT(bit));
+ break;
+ case WMT_FSEL_ALT:
+ if (reg_en == NO_REG) {
+ dev_err(data->dev, "pin:%d no alt function available\n",
+ pin);
+ return -EINVAL;
+ }
+ wmt_clearbits(data, reg_en, BIT(bit));
+ }
+
+ return 0;
+}
+
+static int wmt_pmx_enable(struct pinctrl_dev *pctldev,
+ unsigned func_selector,
+ unsigned group_selector)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+ u32 pinnum = data->pins[group_selector].number;
+
+ return wmt_set_pinmux(data, func_selector, pinnum);
+}
+
+static void wmt_pmx_disable(struct pinctrl_dev *pctldev,
+ unsigned func_selector,
+ unsigned group_selector)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+ u32 pinnum = data->pins[group_selector].number;
+
+ /* disable by setting GPIO_IN */
+ wmt_set_pinmux(data, WMT_FSEL_GPIO_IN, pinnum);
+}
+
+static void wmt_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable by setting GPIO_IN */
+ wmt_set_pinmux(data, WMT_FSEL_GPIO_IN, offset);
+}
+
+static int wmt_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset,
+ bool input)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ wmt_set_pinmux(data, (input ? WMT_FSEL_GPIO_IN : WMT_FSEL_GPIO_OUT),
+ offset);
+
+ return 0;
+}
+
+static struct pinmux_ops wmt_pinmux_ops = {
+ .get_functions_count = wmt_pmx_get_functions_count,
+ .get_function_name = wmt_pmx_get_function_name,
+ .get_function_groups = wmt_pmx_get_function_groups,
+ .enable = wmt_pmx_enable,
+ .disable = wmt_pmx_disable,
+ .gpio_disable_free = wmt_pmx_gpio_disable_free,
+ .gpio_set_direction = wmt_pmx_gpio_set_direction,
+};
+
+static int wmt_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ return data->ngroups;
+}
+
+static const char *wmt_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ return data->groups[selector];
+}
+
+static int wmt_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = &data->pins[selector].number;
+ *num_pins = 1;
+
+ return 0;
+}
+
+static int wmt_pctl_find_group_by_pin(struct wmt_pinctrl_data *data, u32 pin)
+{
+ int i;
+
+ for (i = 0; i < data->npins; i++) {
+ if (data->pins[i].number == pin)
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static int wmt_pctl_dt_node_to_map_func(struct wmt_pinctrl_data *data,
+ struct device_node *np,
+ u32 pin, u32 fnum,
+ struct pinctrl_map **maps)
+{
+ int group;
+ struct pinctrl_map *map = *maps;
+
+ if (fnum >= ARRAY_SIZE(wmt_functions)) {
+ dev_err(data->dev, "invalid wm,function %d\n", fnum);
+ return -EINVAL;
+ }
+
+ group = wmt_pctl_find_group_by_pin(data, pin);
+ if (group < 0) {
+ dev_err(data->dev, "unable to match pin %d to group\n", pin);
+ return group;
+ }
+
+ map->type = PIN_MAP_TYPE_MUX_GROUP;
+ map->data.mux.group = data->groups[group];
+ map->data.mux.function = wmt_functions[fnum];
+ (*maps)++;
+
+ return 0;
+}
+
+static int wmt_pctl_dt_node_to_map_pull(struct wmt_pinctrl_data *data,
+ struct device_node *np,
+ u32 pin, u32 pull,
+ struct pinctrl_map **maps)
+{
+ int group;
+ unsigned long *configs;
+ struct pinctrl_map *map = *maps;
+
+ if (pull > 2) {
+ dev_err(data->dev, "invalid wm,pull %d\n", pull);
+ return -EINVAL;
+ }
+
+ group = wmt_pctl_find_group_by_pin(data, pin);
+ if (group < 0) {
+ dev_err(data->dev, "unable to match pin %d to group\n", pin);
+ return group;
+ }
+
+ configs = kzalloc(sizeof(*configs), GFP_KERNEL);
+ if (!configs)
+ return -ENOMEM;
+
+ configs[0] = pull;
+
+ map->type = PIN_MAP_TYPE_CONFIGS_PIN;
+ map->data.configs.group_or_pin = data->groups[group];
+ map->data.configs.configs = configs;
+ map->data.configs.num_configs = 1;
+ (*maps)++;
+
+ return 0;
+}
+
+static void wmt_pctl_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *maps,
+ unsigned num_maps)
+{
+ int i;
+
+ for (i = 0; i < num_maps; i++)
+ if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
+ kfree(maps[i].data.configs.configs);
+
+ kfree(maps);
+}
+
+static int wmt_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np,
+ struct pinctrl_map **map,
+ unsigned *num_maps)
+{
+ struct pinctrl_map *maps, *cur_map;
+ struct property *pins, *funcs, *pulls;
+ u32 pin, func, pull;
+ int num_pins, num_funcs, num_pulls, maps_per_pin;
+ int i, err;
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ pins = of_find_property(np, "wm,pins", NULL);
+ if (!pins) {
+ dev_err(data->dev, "missing wmt,pins property\n");
+ return -EINVAL;
+ }
+
+ funcs = of_find_property(np, "wm,function", NULL);
+ pulls = of_find_property(np, "wm,pull", NULL);
+
+ if (!funcs && !pulls) {
+ dev_err(data->dev, "neither wm,function nor wm,pull specified\n");
+ return -EINVAL;
+ }
+
+ /*
+ * The following lines calculate how many values are defined for each
+ * of the properties.
+ */
+ num_pins = pins->length / sizeof(u32);
+ num_funcs = funcs ? (funcs->length / sizeof(u32)) : 0;
+ num_pulls = pulls ? (pulls->length / sizeof(u32)) : 0;
+
+ if (num_funcs > 1 && num_funcs != num_pins) {
+ dev_err(data->dev, "wm,function must have 1 or %d entries\n",
+ num_pins);
+ return -EINVAL;
+ }
+
+ if (num_pulls > 1 && num_pulls != num_pins) {
+ dev_err(data->dev, "wm,pull must have 1 or %d entries\n",
+ num_pins);
+ return -EINVAL;
+ }
+
+ maps_per_pin = 0;
+ if (num_funcs)
+ maps_per_pin++;
+ if (num_pulls)
+ maps_per_pin++;
+
+ cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps),
+ GFP_KERNEL);
+ if (!maps)
+ return -ENOMEM;
+
+ for (i = 0; i < num_pins; i++) {
+ err = of_property_read_u32_index(np, "wm,pins", i, &pin);
+ if (err)
+ goto fail;
+
+ if (pin >= (data->nbanks * 32)) {
+ dev_err(data->dev, "invalid wm,pins value\n");
+ err = -EINVAL;
+ goto fail;
+ }
+
+ if (num_funcs) {
+ err = of_property_read_u32_index(np, "wm,function",
+ (num_funcs > 1 ? i : 0), &func);
+ if (err)
+ goto fail;
+
+ err = wmt_pctl_dt_node_to_map_func(data, np, pin, func,
+ &cur_map);
+ if (err)
+ goto fail;
+ }
+
+ if (num_pulls) {
+ err = of_property_read_u32_index(np, "wm,pull",
+ (num_pulls > 1 ? i : 0), &pull);
+ if (err)
+ goto fail;
+
+ err = wmt_pctl_dt_node_to_map_pull(data, np, pin, pull,
+ &cur_map);
+ if (err)
+ goto fail;
+ }
+ }
+ *map = maps;
+ *num_maps = num_pins * maps_per_pin;
+ return 0;
+
+/*
+ * The fail path removes any maps that have been allocated. The fail path is
+ * only called from code after maps has been kzalloc'd. It is also safe to
+ * pass 'num_pins * maps_per_pin' as the map count even though we probably
+ * failed before all the mappings were read as all maps are allocated at once,
+ * and configs are only allocated for .type = PIN_MAP_TYPE_CONFIGS_PIN - there
+ * is no failpath where a config can be allocated without .type being set.
+ */
+fail:
+ wmt_pctl_dt_free_map(pctldev, maps, num_pins * maps_per_pin);
+ return err;
+}
+
+static struct pinctrl_ops wmt_pctl_ops = {
+ .get_groups_count = wmt_get_groups_count,
+ .get_group_name = wmt_get_group_name,
+ .get_group_pins = wmt_get_group_pins,
+ .dt_node_to_map = wmt_pctl_dt_node_to_map,
+ .dt_free_map = wmt_pctl_dt_free_map,
+};
+
+static int wmt_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long *config)
+{
+ return -ENOTSUPP;
+}
+
+static int wmt_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long config)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+ enum pin_config_param param = pinconf_to_config_param(config);
+ u16 arg = pinconf_to_config_argument(config);
+ u32 bank = WMT_BANK_FROM_PIN(pin);
+ u32 bit = WMT_BIT_FROM_PIN(pin);
+ u32 reg_pull_en = data->banks[bank].reg_pull_en;
+ u32 reg_pull_cfg = data->banks[bank].reg_pull_cfg;
+
+ if ((reg_pull_en == NO_REG) || (reg_pull_cfg == NO_REG)) {
+ dev_err(data->dev, "bias functions not supported on pin %d\n",
+ pin);
+ return -EINVAL;
+ }
+
+ if ((param == PIN_CONFIG_BIAS_PULL_DOWN) ||
+ (param == PIN_CONFIG_BIAS_PULL_UP)) {
+ if (arg == 0)
+ param = PIN_CONFIG_BIAS_DISABLE;
+ }
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ wmt_clearbits(data, reg_pull_en, BIT(bit));
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ wmt_clearbits(data, reg_pull_cfg, BIT(bit));
+ wmt_setbits(data, reg_pull_en, BIT(bit));
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ wmt_setbits(data, reg_pull_cfg, BIT(bit));
+ wmt_setbits(data, reg_pull_en, BIT(bit));
+ break;
+ default:
+ dev_err(data->dev, "unknown pinconf param\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct pinconf_ops wmt_pinconf_ops = {
+ .pin_config_get = wmt_pinconf_get,
+ .pin_config_set = wmt_pinconf_set,
+};
+
+static struct pinctrl_desc wmt_desc = {
+ .owner = THIS_MODULE,
+ .name = "pinctrl-wmt",
+ .pctlops = &wmt_pctl_ops,
+ .pmxops = &wmt_pinmux_ops,
+ .confops = &wmt_pinconf_ops,
+};
+
+static int wmt_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_request_gpio(chip->base + offset);
+}
+
+static void wmt_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ pinctrl_free_gpio(chip->base + offset);
+}
+
+static int wmt_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+ struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev);
+ u32 bank = WMT_BANK_FROM_PIN(offset);
+ u32 bit = WMT_BIT_FROM_PIN(offset);
+ u32 reg_dir = data->banks[bank].reg_dir;
+ u32 val;
+
+ val = readl_relaxed(data->base + reg_dir);
+ if (val & BIT(bit))
+ return GPIOF_DIR_OUT;
+ else
+ return GPIOF_DIR_IN;
+}
+
+static int wmt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_gpio_direction_input(chip->base + offset);
+}
+
+static int wmt_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
+static int wmt_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev);
+ u32 bank = WMT_BANK_FROM_PIN(offset);
+ u32 bit = WMT_BIT_FROM_PIN(offset);
+ u32 reg_data_in = data->banks[bank].reg_data_in;
+
+ if (reg_data_in == NO_REG) {
+ dev_err(data->dev, "no data in register defined\n");
+ return -EINVAL;
+ }
+
+ return !!(readl_relaxed(data->base + reg_data_in) & BIT(bit));
+}
+
+static void wmt_gpio_set_value(struct gpio_chip *chip, unsigned offset,
+ int val)
+{
+ struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev);
+ u32 bank = WMT_BANK_FROM_PIN(offset);
+ u32 bit = WMT_BIT_FROM_PIN(offset);
+ u32 reg_data_out = data->banks[bank].reg_data_out;
+
+ if (reg_data_out == NO_REG) {
+ dev_err(data->dev, "no data out register defined\n");
+ return;
+ }
+
+ if (val)
+ wmt_setbits(data, reg_data_out, BIT(bit));
+ else
+ wmt_clearbits(data, reg_data_out, BIT(bit));
+}
+
+static struct gpio_chip wmt_gpio_chip = {
+ .label = "gpio-wmt",
+ .owner = THIS_MODULE,
+ .request = wmt_gpio_request,
+ .free = wmt_gpio_free,
+ .get_direction = wmt_gpio_get_direction,
+ .direction_input = wmt_gpio_direction_input,
+ .direction_output = wmt_gpio_direction_output,
+ .get = wmt_gpio_get_value,
+ .set = wmt_gpio_set_value,
+ .can_sleep = 0,
+};
+
+int wmt_pinctrl_probe(struct platform_device *pdev,
+ struct wmt_pinctrl_data *data)
+{
+ int err;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!data->base) {
+ dev_err(&pdev->dev, "failed to map memory resource\n");
+ return -EBUSY;
+ }
+
+ wmt_desc.pins = data->pins;
+ wmt_desc.npins = data->npins;
+
+ data->gpio_chip = wmt_gpio_chip;
+ data->gpio_chip.dev = &pdev->dev;
+ data->gpio_chip.of_node = pdev->dev.of_node;
+ data->gpio_chip.ngpio = data->nbanks * 32;
+
+ platform_set_drvdata(pdev, data);
+
+ data->dev = &pdev->dev;
+
+ data->pctl_dev = pinctrl_register(&wmt_desc, &pdev->dev, data);
+ if (!data->pctl_dev) {
+ dev_err(&pdev->dev, "Failed to register pinctrl\n");
+ return -EINVAL;
+ }
+
+ err = gpiochip_add(&data->gpio_chip);
+ if (err) {
+ dev_err(&pdev->dev, "could not add GPIO chip\n");
+ goto fail_gpio;
+ }
+
+ err = gpiochip_add_pin_range(&data->gpio_chip, dev_name(data->dev),
+ 0, 0, data->nbanks * 32);
+ if (err)
+ goto fail_range;
+
+ dev_info(&pdev->dev, "Pin controller initialized\n");
+
+ return 0;
+
+fail_range:
+ err = gpiochip_remove(&data->gpio_chip);
+ if (err)
+ dev_err(&pdev->dev, "failed to remove gpio chip\n");
+fail_gpio:
+ pinctrl_unregister(data->pctl_dev);
+ return err;
+}
+
+int wmt_pinctrl_remove(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data = platform_get_drvdata(pdev);
+ int err;
+
+ err = gpiochip_remove(&data->gpio_chip);
+ if (err)
+ dev_err(&pdev->dev, "failed to remove gpio chip\n");
+
+ pinctrl_unregister(data->pctl_dev);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Pinctrl driver for the Wondermedia SoC's
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/gpio.h>
+
+/* VT8500 has no enable register in the extgpio bank. */
+#define NO_REG 0xFFFF
+
+#define WMT_PINCTRL_BANK(__en, __dir, __dout, __din, __pen, __pcfg) \
+{ \
+ .reg_en = __en, \
+ .reg_dir = __dir, \
+ .reg_data_out = __dout, \
+ .reg_data_in = __din, \
+ .reg_pull_en = __pen, \
+ .reg_pull_cfg = __pcfg, \
+}
+
+/* Encode/decode the bank/bit pairs into a pin value */
+#define WMT_PIN(__bank, __offset) ((__bank << 5) | __offset)
+#define WMT_BANK_FROM_PIN(__pin) (__pin >> 5)
+#define WMT_BIT_FROM_PIN(__pin) (__pin & 0x1f)
+
+#define WMT_GROUP(__name, __data) \
+{ \
+ .name = __name, \
+ .pins = __data, \
+ .npins = ARRAY_SIZE(__data), \
+}
+
+struct wmt_pinctrl_bank_registers {
+ u32 reg_en;
+ u32 reg_dir;
+ u32 reg_data_out;
+ u32 reg_data_in;
+
+ u32 reg_pull_en;
+ u32 reg_pull_cfg;
+};
+
+struct wmt_pinctrl_group {
+ const char *name;
+ const unsigned int *pins;
+ const unsigned npins;
+};
+
+struct wmt_pinctrl_data {
+ struct device *dev;
+ struct pinctrl_dev *pctl_dev;
+
+ /* must be initialized before calling wmt_pinctrl_probe */
+ void __iomem *base;
+ const struct wmt_pinctrl_bank_registers *banks;
+ const struct pinctrl_pin_desc *pins;
+ const char * const *groups;
+
+ u32 nbanks;
+ u32 npins;
+ u32 ngroups;
+
+ struct gpio_chip gpio_chip;
+ struct pinctrl_gpio_range gpio_range;
+};
+
+int wmt_pinctrl_probe(struct platform_device *pdev,
+ struct wmt_pinctrl_data *data);
+int wmt_pinctrl_remove(struct platform_device *pdev);
--- /dev/null
+config ARCH_HAS_RESET_CONTROLLER
+ bool
+
+menuconfig RESET_CONTROLLER
+ bool "Reset Controller Support"
+ default y if ARCH_HAS_RESET_CONTROLLER
+ help
+ Generic Reset Controller support.
+
+ This framework is designed to abstract reset handling of devices
+ via GPIOs or SoC-internal reset controller modules.
+
+ If unsure, say no.
--- /dev/null
+obj-$(CONFIG_RESET_CONTROLLER) += core.o
--- /dev/null
+/*
+ * Reset Controller framework
+ *
+ * Copyright 2013 Philipp Zabel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/reset.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+
+static DEFINE_MUTEX(reset_controller_list_mutex);
+static LIST_HEAD(reset_controller_list);
+
+/**
+ * struct reset_control - a reset control
+ * @rcdev: a pointer to the reset controller device
+ * this reset control belongs to
+ * @id: ID of the reset controller in the reset
+ * controller device
+ */
+struct reset_control {
+ struct reset_controller_dev *rcdev;
+ struct device *dev;
+ unsigned int id;
+};
+
+/**
+ * of_reset_simple_xlate - translate reset_spec to the reset line number
+ * @rcdev: a pointer to the reset controller device
+ * @reset_spec: reset line specifier as found in the device tree
+ * @flags: a flags pointer to fill in (optional)
+ *
+ * This simple translation function should be used for reset controllers
+ * with 1:1 mapping, where reset lines can be indexed by number without gaps.
+ */
+int of_reset_simple_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
+ return -EINVAL;
+
+ if (reset_spec->args[0] >= rcdev->nr_resets)
+ return -EINVAL;
+
+ return reset_spec->args[0];
+}
+EXPORT_SYMBOL_GPL(of_reset_simple_xlate);
+
+/**
+ * reset_controller_register - register a reset controller device
+ * @rcdev: a pointer to the initialized reset controller device
+ */
+int reset_controller_register(struct reset_controller_dev *rcdev)
+{
+ if (!rcdev->of_xlate) {
+ rcdev->of_reset_n_cells = 1;
+ rcdev->of_xlate = of_reset_simple_xlate;
+ }
+
+ mutex_lock(&reset_controller_list_mutex);
+ list_add(&rcdev->list, &reset_controller_list);
+ mutex_unlock(&reset_controller_list_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(reset_controller_register);
+
+/**
+ * reset_controller_unregister - unregister a reset controller device
+ * @rcdev: a pointer to the reset controller device
+ */
+void reset_controller_unregister(struct reset_controller_dev *rcdev)
+{
+ mutex_lock(&reset_controller_list_mutex);
+ list_del(&rcdev->list);
+ mutex_unlock(&reset_controller_list_mutex);
+}
+EXPORT_SYMBOL_GPL(reset_controller_unregister);
+
+/**
+ * reset_control_reset - reset the controlled device
+ * @rstc: reset controller
+ */
+int reset_control_reset(struct reset_control *rstc)
+{
+ if (rstc->rcdev->ops->reset)
+ return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id);
+
+ return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(reset_control_reset);
+
+/**
+ * reset_control_assert - asserts the reset line
+ * @rstc: reset controller
+ */
+int reset_control_assert(struct reset_control *rstc)
+{
+ if (rstc->rcdev->ops->assert)
+ return rstc->rcdev->ops->assert(rstc->rcdev, rstc->id);
+
+ return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(reset_control_assert);
+
+/**
+ * reset_control_deassert - deasserts the reset line
+ * @rstc: reset controller
+ */
+int reset_control_deassert(struct reset_control *rstc)
+{
+ if (rstc->rcdev->ops->deassert)
+ return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->id);
+
+ return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(reset_control_deassert);
+
+/**
+ * reset_control_get - Lookup and obtain a reference to a reset controller.
+ * @dev: device to be reset by the controller
+ * @id: reset line name
+ *
+ * Returns a struct reset_control or IS_ERR() condition containing errno.
+ *
+ * Use of id names is optional.
+ */
+struct reset_control *reset_control_get(struct device *dev, const char *id)
+{
+ struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER);
+ struct reset_controller_dev *r, *rcdev;
+ struct of_phandle_args args;
+ int index = 0;
+ int rstc_id;
+ int ret;
+
+ if (!dev)
+ return ERR_PTR(-EINVAL);
+
+ if (id)
+ index = of_property_match_string(dev->of_node,
+ "reset-names", id);
+ ret = of_parse_phandle_with_args(dev->of_node, "resets", "#reset-cells",
+ index, &args);
+ if (ret)
+ return ERR_PTR(ret);
+
+ mutex_lock(&reset_controller_list_mutex);
+ rcdev = NULL;
+ list_for_each_entry(r, &reset_controller_list, list) {
+ if (args.np == r->of_node) {
+ rcdev = r;
+ break;
+ }
+ }
+ of_node_put(args.np);
+
+ if (!rcdev) {
+ mutex_unlock(&reset_controller_list_mutex);
+ return ERR_PTR(-ENODEV);
+ }
+
+ rstc_id = rcdev->of_xlate(rcdev, &args);
+ if (rstc_id < 0) {
+ mutex_unlock(&reset_controller_list_mutex);
+ return ERR_PTR(rstc_id);
+ }
+
+ try_module_get(rcdev->owner);
+ mutex_unlock(&reset_controller_list_mutex);
+
+ rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
+ if (!rstc) {
+ module_put(rcdev->owner);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ rstc->dev = dev;
+ rstc->rcdev = rcdev;
+ rstc->id = rstc_id;
+
+ return rstc;
+}
+EXPORT_SYMBOL_GPL(reset_control_get);
+
+/**
+ * reset_control_put - free the reset controller
+ * @rstc: reset controller
+ */
+
+void reset_control_put(struct reset_control *rstc)
+{
+ if (IS_ERR(rstc))
+ return;
+
+ module_put(rstc->rcdev->owner);
+ kfree(rstc);
+}
+EXPORT_SYMBOL_GPL(reset_control_put);
+
+static void devm_reset_control_release(struct device *dev, void *res)
+{
+ reset_control_put(*(struct reset_control **)res);
+}
+
+/**
+ * devm_reset_control_get - resource managed reset_control_get()
+ * @dev: device to be reset by the controller
+ * @id: reset line name
+ *
+ * Managed reset_control_get(). For reset controllers returned from this
+ * function, reset_control_put() is called automatically on driver detach.
+ * See reset_control_get() for more information.
+ */
+struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
+{
+ struct reset_control **ptr, *rstc;
+
+ ptr = devres_alloc(devm_reset_control_release, sizeof(*ptr),
+ GFP_KERNEL);
+ if (!ptr)
+ return ERR_PTR(-ENOMEM);
+
+ rstc = reset_control_get(dev, id);
+ if (!IS_ERR(rstc)) {
+ *ptr = rstc;
+ devres_add(dev, ptr);
+ } else {
+ devres_free(ptr);
+ }
+
+ return rstc;
+}
+EXPORT_SYMBOL_GPL(devm_reset_control_get);
+
+static int devm_reset_control_match(struct device *dev, void *res, void *data)
+{
+ struct reset_control **rstc = res;
+ if (WARN_ON(!rstc || !*rstc))
+ return 0;
+ return *rstc == data;
+}
+
+/**
+ * devm_reset_control_put - resource managed reset_control_put()
+ * @rstc: reset controller to free
+ *
+ * Deallocate a reset control allocated withd devm_reset_control_get().
+ * This function will not need to be called normally, as devres will take
+ * care of freeing the resource.
+ */
+void devm_reset_control_put(struct reset_control *rstc)
+{
+ int ret;
+
+ ret = devres_release(rstc->dev, devm_reset_control_release,
+ devm_reset_control_match, rstc);
+ if (ret)
+ WARN_ON(ret);
+}
+EXPORT_SYMBOL_GPL(devm_reset_control_put);
+
+/**
+ * device_reset - find reset controller associated with the device
+ * and perform reset
+ * @dev: device to be reset by the controller
+ *
+ * Convenience wrapper for reset_control_get() and reset_control_reset().
+ * This is useful for the common case of devices with single, dedicated reset
+ * lines.
+ */
+int device_reset(struct device *dev)
+{
+ struct reset_control *rstc;
+ int ret;
+
+ rstc = reset_control_get(dev, NULL);
+ if (IS_ERR(rstc))
+ return PTR_ERR(rstc);
+
+ ret = reset_control_reset(rstc);
+
+ reset_control_put(rstc);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(device_reset);
rtc->da9052 = dev_get_drvdata(pdev->dev.parent);
platform_set_drvdata(pdev, rtc);
- rtc->irq = platform_get_irq_byname(pdev, "ALM");
- ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
- da9052_rtc_irq,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- "ALM", rtc);
+ rtc->irq = DA9052_IRQ_ALARM;
+ ret = da9052_request_irq(rtc->da9052, rtc->irq, "ALM",
+ da9052_rtc_irq, rtc);
if (ret != 0) {
rtc_err(rtc->da9052, "irq registration failed: %d\n", ret);
return ret;
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <linux/gfp.h>
#include <linux/module.h>
struct rtc_device *rtc;
void __iomem *ioaddr;
int irq;
+ struct clk *clk;
};
static int mv_rtc_set_time(struct device *dev, struct rtc_time *tm)
struct rtc_plat_data *pdata;
resource_size_t size;
u32 rtc_time;
+ int ret = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
if (!pdata->ioaddr)
return -ENOMEM;
+ pdata->clk = devm_clk_get(&pdev->dev, NULL);
+ /* Not all SoCs require a clock.*/
+ if (!IS_ERR(pdata->clk))
+ clk_prepare_enable(pdata->clk);
+
/* make sure the 24 hours mode is enabled */
rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
if (rtc_time & RTC_HOURS_12H_MODE) {
dev_err(&pdev->dev, "24 Hours mode not supported.\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
/* make sure it is actually functional */
rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
if (rtc_time == 0x01000000) {
dev_err(&pdev->dev, "internal RTC not ticking\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto out;
}
}
} else
pdata->rtc = rtc_device_register(pdev->name, &pdev->dev,
&mv_rtc_ops, THIS_MODULE);
- if (IS_ERR(pdata->rtc))
- return PTR_ERR(pdata->rtc);
+ if (IS_ERR(pdata->rtc)) {
+ ret = PTR_ERR(pdata->rtc);
+ goto out;
+ }
if (pdata->irq >= 0) {
writel(0, pdata->ioaddr + RTC_ALARM_INTERRUPT_MASK_REG_OFFS);
}
return 0;
+out:
+ if (!IS_ERR(pdata->clk))
+ clk_disable_unprepare(pdata->clk);
+
+ return ret;
}
static int __exit mv_rtc_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
rtc_device_unregister(pdata->rtc);
+ if (!IS_ERR(pdata->clk))
+ clk_disable_unprepare(pdata->clk);
+
return 0;
}
#include <linux/uaccess.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/regs-rtc.h>
+#include "rtc-s3c.h"
enum s3c_cpu_type {
TYPE_S3C2410,
-/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
- *
+/*
* Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
*
.release = scm_release,
};
+static bool scm_permit_request(struct scm_blk_dev *bdev, struct request *req)
+{
+ return rq_data_dir(req) != WRITE || bdev->state != SCM_WR_PROHIBIT;
+}
+
static void scm_request_prepare(struct scm_request *scmrq)
{
struct scm_blk_dev *bdev = scmrq->bdev;
scm_release_cluster(scmrq);
blk_requeue_request(bdev->rq, scmrq->request);
+ atomic_dec(&bdev->queued_reqs);
scm_request_done(scmrq);
scm_ensure_queue_restart(bdev);
}
void scm_request_finish(struct scm_request *scmrq)
{
+ struct scm_blk_dev *bdev = scmrq->bdev;
+
scm_release_cluster(scmrq);
blk_end_request_all(scmrq->request, scmrq->error);
+ atomic_dec(&bdev->queued_reqs);
scm_request_done(scmrq);
}
if (req->cmd_type != REQ_TYPE_FS)
continue;
+ if (!scm_permit_request(bdev, req)) {
+ scm_ensure_queue_restart(bdev);
+ return;
+ }
scmrq = scm_request_fetch();
if (!scmrq) {
SCM_LOG(5, "no request");
return;
}
if (scm_need_cluster_request(scmrq)) {
+ atomic_inc(&bdev->queued_reqs);
blk_start_request(req);
scm_initiate_cluster_request(scmrq);
return;
}
scm_request_prepare(scmrq);
+ atomic_inc(&bdev->queued_reqs);
blk_start_request(req);
ret = scm_start_aob(scmrq->aob);
scm_request_requeue(scmrq);
return;
}
- atomic_inc(&bdev->queued_reqs);
}
}
tasklet_hi_schedule(&bdev->tasklet);
}
+static void scm_blk_handle_error(struct scm_request *scmrq)
+{
+ struct scm_blk_dev *bdev = scmrq->bdev;
+ unsigned long flags;
+
+ if (scmrq->error != -EIO)
+ goto restart;
+
+ /* For -EIO the response block is valid. */
+ switch (scmrq->aob->response.eqc) {
+ case EQC_WR_PROHIBIT:
+ spin_lock_irqsave(&bdev->lock, flags);
+ if (bdev->state != SCM_WR_PROHIBIT)
+ pr_info("%lx: Write access to the SCM increment is suspended\n",
+ (unsigned long) bdev->scmdev->address);
+ bdev->state = SCM_WR_PROHIBIT;
+ spin_unlock_irqrestore(&bdev->lock, flags);
+ goto requeue;
+ default:
+ break;
+ }
+
+restart:
+ if (!scm_start_aob(scmrq->aob))
+ return;
+
+requeue:
+ spin_lock_irqsave(&bdev->rq_lock, flags);
+ scm_request_requeue(scmrq);
+ spin_unlock_irqrestore(&bdev->rq_lock, flags);
+}
+
static void scm_blk_tasklet(struct scm_blk_dev *bdev)
{
struct scm_request *scmrq;
spin_unlock_irqrestore(&bdev->lock, flags);
if (scmrq->error && scmrq->retries-- > 0) {
- if (scm_start_aob(scmrq->aob)) {
- spin_lock_irqsave(&bdev->rq_lock, flags);
- scm_request_requeue(scmrq);
- spin_unlock_irqrestore(&bdev->rq_lock, flags);
- }
+ scm_blk_handle_error(scmrq);
+
/* Request restarted or requeued, handle next. */
spin_lock_irqsave(&bdev->lock, flags);
continue;
}
scm_request_finish(scmrq);
- atomic_dec(&bdev->queued_reqs);
spin_lock_irqsave(&bdev->lock, flags);
}
spin_unlock_irqrestore(&bdev->lock, flags);
}
bdev->scmdev = scmdev;
+ bdev->state = SCM_OPER;
spin_lock_init(&bdev->rq_lock);
spin_lock_init(&bdev->lock);
INIT_LIST_HEAD(&bdev->finished_requests);
put_disk(bdev->gendisk);
}
+void scm_blk_set_available(struct scm_blk_dev *bdev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&bdev->lock, flags);
+ if (bdev->state == SCM_WR_PROHIBIT)
+ pr_info("%lx: Write access to the SCM increment is restored\n",
+ (unsigned long) bdev->scmdev->address);
+ bdev->state = SCM_OPER;
+ spin_unlock_irqrestore(&bdev->lock, flags);
+}
+
static int __init scm_blk_init(void)
{
int ret = -EINVAL;
goto out;
scm_major = ret;
- if (scm_alloc_rqs(nr_requests))
+ ret = scm_alloc_rqs(nr_requests);
+ if (ret)
goto out_unreg;
scm_debug = debug_register("scm_log", 16, 1, 16);
- if (!scm_debug)
+ if (!scm_debug) {
+ ret = -ENOMEM;
goto out_free;
+ }
debug_register_view(scm_debug, &debug_hex_ascii_view);
debug_set_level(scm_debug, 2);
spinlock_t rq_lock; /* guard the request queue */
spinlock_t lock; /* guard the rest of the blockdev */
atomic_t queued_reqs;
+ enum {SCM_OPER, SCM_WR_PROHIBIT} state;
struct list_head finished_requests;
#ifdef CONFIG_SCM_BLOCK_CLUSTER_WRITE
struct list_head cluster_list;
int scm_blk_dev_setup(struct scm_blk_dev *, struct scm_device *);
void scm_blk_dev_cleanup(struct scm_blk_dev *);
+void scm_blk_set_available(struct scm_blk_dev *);
void scm_blk_irq(struct scm_device *, void *, int);
void scm_request_finish(struct scm_request *);
#include <asm/eadm.h>
#include "scm_blk.h"
-static void notify(struct scm_device *scmdev)
+static void scm_notify(struct scm_device *scmdev, enum scm_event event)
{
- pr_info("%lu: The capabilities of the SCM increment changed\n",
- (unsigned long) scmdev->address);
- SCM_LOG(2, "State changed");
- SCM_LOG_STATE(2, scmdev);
+ struct scm_blk_dev *bdev = dev_get_drvdata(&scmdev->dev);
+
+ switch (event) {
+ case SCM_CHANGE:
+ pr_info("%lx: The capabilities of the SCM increment changed\n",
+ (unsigned long) scmdev->address);
+ SCM_LOG(2, "State changed");
+ SCM_LOG_STATE(2, scmdev);
+ break;
+ case SCM_AVAIL:
+ SCM_LOG(2, "Increment available");
+ SCM_LOG_STATE(2, scmdev);
+ scm_blk_set_available(bdev);
+ break;
+ }
}
static int scm_probe(struct scm_device *scmdev)
.name = "scm_block",
.owner = THIS_MODULE,
},
- .notify = notify,
+ .notify = scm_notify,
.probe = scm_probe,
.remove = scm_remove,
.handler = scm_blk_irq,
struct read_storage_sccb *sccb;
int i, id, assigned, rc;
+ if (OLDMEM_BASE) /* No standby memory in kdump mode */
+ return 0;
if (!early_read_info_sccb_valid)
return 0;
if ((sclp_facilities & 0xe00000000000ULL) != 0xe00000000000ULL)
int i, rc;
/* Check if the tty3270 is already there. */
- view = raw3270_find_view(&tty3270_fn, tty->index);
+ view = raw3270_find_view(&tty3270_fn, tty->index + RAW3270_FIRSTMINOR);
if (!IS_ERR(view)) {
tp = container_of(view, struct tty3270, view);
tty->driver_data = tp;
tp->inattr = TF_INPUT;
return tty_port_install(&tp->port, driver, tty);
}
- if (tty3270_max_index < tty->index)
- tty3270_max_index = tty->index;
+ if (tty3270_max_index < tty->index + 1)
+ tty3270_max_index = tty->index + 1;
/* Allocate tty3270 structure on first open. */
tp = tty3270_alloc_view();
if (IS_ERR(tp))
return PTR_ERR(tp);
- rc = raw3270_add_view(&tp->view, &tty3270_fn, tty->index);
+ rc = raw3270_add_view(&tp->view, &tty3270_fn,
+ tty->index + RAW3270_FIRSTMINOR);
if (rc) {
tty3270_free_view(tp);
return rc;
void tty3270_create_cb(int minor)
{
- tty_register_device(tty3270_driver, minor, NULL);
+ tty_register_device(tty3270_driver, minor - RAW3270_FIRSTMINOR, NULL);
}
void tty3270_destroy_cb(int minor)
{
- tty_unregister_device(tty3270_driver, minor);
+ tty_unregister_device(tty3270_driver, minor - RAW3270_FIRSTMINOR);
}
struct raw3270_notifier tty3270_notifier =
driver->driver_name = "tty3270";
driver->name = "3270/tty";
driver->major = IBM_TTY3270_MAJOR;
- driver->minor_start = 0;
+ driver->minor_start = RAW3270_FIRSTMINOR;
+ driver->name_base = RAW3270_FIRSTMINOR;
driver->type = TTY_DRIVER_TYPE_SYSTEM;
driver->subtype = SYSTEM_TYPE_TTY;
driver->init_termios = tty_std_termios;
" failed (rc=%d).\n", ret);
}
+static void chsc_process_sei_scm_avail(struct chsc_sei_nt0_area *sei_area)
+{
+ int ret;
+
+ CIO_CRW_EVENT(4, "chsc: scm available information\n");
+ if (sei_area->rs != 7)
+ return;
+
+ ret = scm_process_availability_information();
+ if (ret)
+ CIO_CRW_EVENT(0, "chsc: process availability information"
+ " failed (rc=%d).\n", ret);
+}
+
static void chsc_process_sei_nt2(struct chsc_sei_nt2_area *sei_area)
{
switch (sei_area->cc) {
case 12: /* scm change notification */
chsc_process_sei_scm_change(sei_area);
break;
+ case 14: /* scm available notification */
+ chsc_process_sei_scm_avail(sei_area);
+ break;
default: /* other stuff */
CIO_CRW_EVENT(2, "chsc: sei nt0 unhandled cc=%d\n",
sei_area->cc);
#ifdef CONFIG_SCM_BUS
int scm_update_information(void);
+int scm_process_availability_information(void);
#else /* CONFIG_SCM_BUS */
static inline int scm_update_information(void) { return 0; }
+static inline int scm_process_availability_information(void) { return 0; }
#endif /* CONFIG_SCM_BUS */
goto out;
scmdrv = to_scm_drv(scmdev->dev.driver);
if (changed && scmdrv->notify)
- scmdrv->notify(scmdev);
+ scmdrv->notify(scmdev, SCM_CHANGE);
out:
device_unlock(&scmdev->dev);
if (changed)
return ret;
}
+static int scm_dev_avail(struct device *dev, void *unused)
+{
+ struct scm_driver *scmdrv = to_scm_drv(dev->driver);
+ struct scm_device *scmdev = to_scm_dev(dev);
+
+ if (dev->driver && scmdrv->notify)
+ scmdrv->notify(scmdev, SCM_AVAIL);
+
+ return 0;
+}
+
+int scm_process_availability_information(void)
+{
+ return bus_for_each_dev(&scm_bus_type, NULL, NULL, scm_dev_avail);
+}
+
static int __init scm_init(void)
{
int ret;
void *reply_param);
int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int);
int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int);
+int qeth_get_elements_for_frags(struct sk_buff *);
int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *,
struct sk_buff *, struct qeth_hdr *, int, int, int);
int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *,
}
EXPORT_SYMBOL_GPL(qeth_get_priority_queue);
+int qeth_get_elements_for_frags(struct sk_buff *skb)
+{
+ int cnt, length, e, elements = 0;
+ struct skb_frag_struct *frag;
+ char *data;
+
+ for (cnt = 0; cnt < skb_shinfo(skb)->nr_frags; cnt++) {
+ frag = &skb_shinfo(skb)->frags[cnt];
+ data = (char *)page_to_phys(skb_frag_page(frag)) +
+ frag->page_offset;
+ length = frag->size;
+ e = PFN_UP((unsigned long)data + length - 1) -
+ PFN_DOWN((unsigned long)data);
+ elements += e;
+ }
+ return elements;
+}
+EXPORT_SYMBOL_GPL(qeth_get_elements_for_frags);
+
int qeth_get_elements_no(struct qeth_card *card, void *hdr,
struct sk_buff *skb, int elems)
{
int elements_needed = PFN_UP((unsigned long)skb->data + dlen - 1) -
PFN_DOWN((unsigned long)skb->data);
- elements_needed += skb_shinfo(skb)->nr_frags;
+ elements_needed += qeth_get_elements_for_frags(skb);
+
if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
"(Number=%d / Length=%d). Discarded.\n",
for (cnt = 0; cnt < skb_shinfo(skb)->nr_frags; cnt++) {
frag = &skb_shinfo(skb)->frags[cnt];
- buffer->element[element].addr = (char *)
- page_to_phys(skb_frag_page(frag))
- + frag->page_offset;
- buffer->element[element].length = frag->size;
- buffer->element[element].eflags = SBAL_EFLAGS_MIDDLE_FRAG;
- element++;
+ data = (char *)page_to_phys(skb_frag_page(frag)) +
+ frag->page_offset;
+ length = frag->size;
+ while (length > 0) {
+ length_here = PAGE_SIZE -
+ ((unsigned long) data % PAGE_SIZE);
+ if (length < length_here)
+ length_here = length;
+
+ buffer->element[element].addr = data;
+ buffer->element[element].length = length_here;
+ buffer->element[element].eflags =
+ SBAL_EFLAGS_MIDDLE_FRAG;
+ length -= length_here;
+ data += length_here;
+ element++;
+ }
}
if (buffer->element[element - 1].eflags)
return rc;
}
-static void qeth_l3_correct_routing_type(struct qeth_card *card,
+static int qeth_l3_correct_routing_type(struct qeth_card *card,
enum qeth_routing_types *type, enum qeth_prot_versions prot)
{
if (card->info.type == QETH_CARD_TYPE_IQD) {
case PRIMARY_CONNECTOR:
case SECONDARY_CONNECTOR:
case MULTICAST_ROUTER:
- return;
+ return 0;
default:
goto out_inval;
}
case NO_ROUTER:
case PRIMARY_ROUTER:
case SECONDARY_ROUTER:
- return;
+ return 0;
case MULTICAST_ROUTER:
if (qeth_is_ipafunc_supported(card, prot,
IPA_OSA_MC_ROUTER))
- return;
+ return 0;
default:
goto out_inval;
}
}
out_inval:
*type = NO_ROUTER;
+ return -EINVAL;
}
int qeth_l3_setrouting_v4(struct qeth_card *card)
QETH_CARD_TEXT(card, 3, "setrtg4");
- qeth_l3_correct_routing_type(card, &card->options.route4.type,
+ rc = qeth_l3_correct_routing_type(card, &card->options.route4.type,
QETH_PROT_IPV4);
+ if (rc)
+ return rc;
rc = qeth_l3_send_setrouting(card, card->options.route4.type,
QETH_PROT_IPV4);
if (!qeth_is_supported(card, IPA_IPV6))
return 0;
- qeth_l3_correct_routing_type(card, &card->options.route6.type,
+ rc = qeth_l3_correct_routing_type(card, &card->options.route6.type,
QETH_PROT_IPV6);
+ if (rc)
+ return rc;
rc = qeth_l3_send_setrouting(card, card->options.route6.type,
QETH_PROT_IPV6);
tcp_hdr(skb)->doff * 4;
int tcpd_len = skb->len - (tcpd - (unsigned long)skb->data);
int elements = PFN_UP(tcpd + tcpd_len - 1) - PFN_DOWN(tcpd);
- elements += skb_shinfo(skb)->nr_frags;
+
+ elements += qeth_get_elements_for_frags(skb);
+
return elements;
}
rc = -ENODEV;
goto out_remove;
}
- qeth_trace_features(card);
if (!card->dev && qeth_l3_setup_netdev(card)) {
rc = -ENODEV;
qeth_l3_set_multicast_list(card->dev);
rtnl_unlock();
}
+ qeth_trace_features(card);
/* let user_space know that device is online */
kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE);
mutex_unlock(&card->conf_mutex);
rc = qeth_l3_setrouting_v6(card);
}
out:
+ if (rc)
+ route->type = old_route_type;
mutex_unlock(&card->conf_mutex);
return rc ? rc : count;
}
fc_exch_init(lport);
fc_rport_init(lport);
fc_disc_init(lport);
+ fc_disc_config(lport, lport);
return 0;
}
}
ctlr = bnx2fc_to_ctlr(interface);
+ cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
interface->vlan_id = vlan_id;
interface->timer_work_queue =
goto ifput_err;
}
- lport = bnx2fc_if_create(interface, &interface->hba->pcidev->dev, 0);
+ lport = bnx2fc_if_create(interface, &cdev->dev, 0);
if (!lport) {
printk(KERN_ERR PFX "Failed to create interface (%s)\n",
netdev->name);
/* Make this master N_port */
ctlr->lp = lport;
- cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
-
if (link_state == BNX2FC_CREATE_LINK_UP)
cdev->enabled = FCOE_CTLR_ENABLED;
else
{
struct net_device *netdev = fcoe->netdev;
struct fcoe_ctlr *fip = fcoe_to_ctlr(fcoe);
- struct fcoe_ctlr_device *ctlr_dev = fcoe_ctlr_to_ctlr_dev(fip);
rtnl_lock();
if (!fcoe->removed)
/* tear-down the FCoE controller */
fcoe_ctlr_destroy(fip);
scsi_host_put(fip->lp->host);
- fcoe_ctlr_device_delete(ctlr_dev);
dev_put(netdev);
module_put(THIS_MODULE);
}
*/
static void fcoe_destroy_work(struct work_struct *work)
{
+ struct fcoe_ctlr_device *cdev;
+ struct fcoe_ctlr *ctlr;
struct fcoe_port *port;
struct fcoe_interface *fcoe;
struct Scsi_Host *shost;
mutex_lock(&fcoe_config_mutex);
fcoe = port->priv;
+ ctlr = fcoe_to_ctlr(fcoe);
+ cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
+
fcoe_if_destroy(port->lport);
fcoe_interface_cleanup(fcoe);
mutex_unlock(&fcoe_config_mutex);
+
+ fcoe_ctlr_device_delete(cdev);
}
/**
rc = -EIO;
rtnl_unlock();
fcoe_interface_cleanup(fcoe);
- goto out_nortnl;
+ mutex_unlock(&fcoe_config_mutex);
+ fcoe_ctlr_device_delete(ctlr_dev);
+ goto out;
}
/* Make this the "master" N_Port */
out_nodev:
rtnl_unlock();
-out_nortnl:
mutex_unlock(&fcoe_config_mutex);
+out:
return rc;
}
fc_lport_set_local_id(fip->lp, new_port_id);
}
+/**
+ * fcoe_ctlr_mode_set() - Set or reset the ctlr's mode
+ * @lport: The local port to be (re)configured
+ * @fip: The FCoE controller whose mode is changing
+ * @fip_mode: The new fip mode
+ *
+ * Note that the we shouldn't be changing the libfc discovery settings
+ * (fc_disc_config) while an lport is going through the libfc state
+ * machine. The mode can only be changed when a fcoe_ctlr device is
+ * disabled, so that should ensure that this routine is only called
+ * when nothing is happening.
+ */
+void fcoe_ctlr_mode_set(struct fc_lport *lport, struct fcoe_ctlr *fip,
+ enum fip_state fip_mode)
+{
+ void *priv;
+
+ WARN_ON(lport->state != LPORT_ST_RESET &&
+ lport->state != LPORT_ST_DISABLED);
+
+ if (fip_mode == FIP_MODE_VN2VN) {
+ lport->rport_priv_size = sizeof(struct fcoe_rport);
+ lport->point_to_multipoint = 1;
+ lport->tt.disc_recv_req = fcoe_ctlr_disc_recv;
+ lport->tt.disc_start = fcoe_ctlr_disc_start;
+ lport->tt.disc_stop = fcoe_ctlr_disc_stop;
+ lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final;
+ priv = fip;
+ } else {
+ lport->rport_priv_size = 0;
+ lport->point_to_multipoint = 0;
+ lport->tt.disc_recv_req = NULL;
+ lport->tt.disc_start = NULL;
+ lport->tt.disc_stop = NULL;
+ lport->tt.disc_stop_final = NULL;
+ priv = lport;
+ }
+
+ fc_disc_config(lport, priv);
+}
+
/**
* fcoe_libfc_config() - Sets up libfc related properties for local port
* @lport: The local port to configure libfc for
fc_exch_init(lport);
fc_elsct_init(lport);
fc_lport_init(lport);
- if (fip->mode == FIP_MODE_VN2VN)
- lport->rport_priv_size = sizeof(struct fcoe_rport);
fc_rport_init(lport);
- if (fip->mode == FIP_MODE_VN2VN) {
- lport->point_to_multipoint = 1;
- lport->tt.disc_recv_req = fcoe_ctlr_disc_recv;
- lport->tt.disc_start = fcoe_ctlr_disc_start;
- lport->tt.disc_stop = fcoe_ctlr_disc_stop;
- lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final;
- mutex_init(&lport->disc.disc_mutex);
- INIT_LIST_HEAD(&lport->disc.rports);
- lport->disc.priv = fip;
- } else {
- fc_disc_init(lport);
- }
+ fc_disc_init(lport);
+ fcoe_ctlr_mode_set(lport, fip, fip->mode);
return 0;
}
EXPORT_SYMBOL_GPL(fcoe_libfc_config);
void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *ctlr_dev)
{
struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(ctlr_dev);
+ struct fc_lport *lport = ctlr->lp;
mutex_lock(&ctlr->ctlr_mutex);
switch (ctlr_dev->mode) {
}
mutex_unlock(&ctlr->ctlr_mutex);
+
+ fcoe_ctlr_mode_set(lport, ctlr, ctlr->mode);
}
EXPORT_SYMBOL(fcoe_ctlr_set_fip_mode);
}
/**
- * fc_disc_init() - Initialize the discovery layer for a local port
- * @lport: The local port that needs the discovery layer to be initialized
+ * fc_disc_config() - Configure the discovery layer for a local port
+ * @lport: The local port that needs the discovery layer to be configured
+ * @priv: Private data structre for users of the discovery layer
*/
-int fc_disc_init(struct fc_lport *lport)
+void fc_disc_config(struct fc_lport *lport, void *priv)
{
- struct fc_disc *disc;
+ struct fc_disc *disc = &lport->disc;
if (!lport->tt.disc_start)
lport->tt.disc_start = fc_disc_start;
lport->tt.disc_recv_req = fc_disc_recv_req;
disc = &lport->disc;
+
+ disc->priv = priv;
+}
+EXPORT_SYMBOL(fc_disc_config);
+
+/**
+ * fc_disc_init() - Initialize the discovery layer for a local port
+ * @lport: The local port that needs the discovery layer to be initialized
+ */
+void fc_disc_init(struct fc_lport *lport)
+{
+ struct fc_disc *disc = &lport->disc;
+
INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout);
mutex_init(&disc->disc_mutex);
INIT_LIST_HEAD(&disc->rports);
-
- disc->priv = lport;
-
- return 0;
}
EXPORT_SYMBOL(fc_disc_init);
config SPI_ALTERA
tristate "Altera SPI Controller"
+ depends on GENERIC_HARDIRQS
select SPI_BITBANG
help
This is the driver for the Altera SPI Controller.
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
- depends on ARCH_PXA || PCI || ACPI
+ depends on (ARCH_PXA || PCI || ACPI) && GENERIC_HARDIRQS
select PXA_SSP if ARCH_PXA
help
This enables using a PXA2xx or Sodaville SSP port as a SPI master
static int bcm63xx_spi_setup(struct spi_device *spi)
{
struct bcm63xx_spi *bs;
- int ret;
bs = spi_master_get_devdata(spi->master);
default:
dev_err(dev, "unsupported MSG_CTL width: %d\n",
bs->msg_ctl_width);
- goto out_clk_disable;
+ goto out_err;
}
/* Initialize hardware */
for (i = count; i > 0; i--) {
data = tx_buf ? *tx_buf++ : 0;
- if (len == EOFBYTE)
+ if (len == EOFBYTE && t->cs_change)
setbits32(&fifo->txcmd, MPC512x_PSC_FIFO_EOF);
out_8(&fifo->txdata_8, data);
len--;
master->dev.parent = &pdev->dev;
master->dev.of_node = pdev->dev.of_node;
- ACPI_HANDLE_SET(&master->dev, ACPI_HANDLE(&pdev->dev));
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
{
struct s3c64xx_spi_driver_data *sdd = data;
struct spi_master *spi = sdd->master;
- unsigned int val;
+ unsigned int val, clr = 0;
- val = readl(sdd->regs + S3C64XX_SPI_PENDING_CLR);
+ val = readl(sdd->regs + S3C64XX_SPI_STATUS);
- val &= S3C64XX_SPI_PND_RX_OVERRUN_CLR |
- S3C64XX_SPI_PND_RX_UNDERRUN_CLR |
- S3C64XX_SPI_PND_TX_OVERRUN_CLR |
- S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
-
- writel(val, sdd->regs + S3C64XX_SPI_PENDING_CLR);
-
- if (val & S3C64XX_SPI_PND_RX_OVERRUN_CLR)
+ if (val & S3C64XX_SPI_ST_RX_OVERRUN_ERR) {
+ clr = S3C64XX_SPI_PND_RX_OVERRUN_CLR;
dev_err(&spi->dev, "RX overrun\n");
- if (val & S3C64XX_SPI_PND_RX_UNDERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_RX_UNDERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_RX_UNDERRUN_CLR;
dev_err(&spi->dev, "RX underrun\n");
- if (val & S3C64XX_SPI_PND_TX_OVERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_TX_OVERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_TX_OVERRUN_CLR;
dev_err(&spi->dev, "TX overrun\n");
- if (val & S3C64XX_SPI_PND_TX_UNDERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_TX_UNDERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
dev_err(&spi->dev, "TX underrun\n");
+ }
+
+ /* Clear the pending irq by setting and then clearing it */
+ writel(clr, sdd->regs + S3C64XX_SPI_PENDING_CLR);
+ writel(0, sdd->regs + S3C64XX_SPI_PENDING_CLR);
return IRQ_HANDLED;
}
writel(0, regs + S3C64XX_SPI_MODE_CFG);
writel(0, regs + S3C64XX_SPI_PACKET_CNT);
- /* Clear any irq pending bits */
- writel(readl(regs + S3C64XX_SPI_PENDING_CLR),
- regs + S3C64XX_SPI_PENDING_CLR);
+ /* Clear any irq pending bits, should set and clear the bits */
+ val = S3C64XX_SPI_PND_RX_OVERRUN_CLR |
+ S3C64XX_SPI_PND_RX_UNDERRUN_CLR |
+ S3C64XX_SPI_PND_TX_OVERRUN_CLR |
+ S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
+ writel(val, regs + S3C64XX_SPI_PENDING_CLR);
+ writel(0, regs + S3C64XX_SPI_PENDING_CLR);
writel(0, regs + S3C64XX_SPI_SWAP_CFG);
return 0;
}
-static int tegra_slink_prepare_transfer(struct spi_master *master)
-{
- struct tegra_slink_data *tspi = spi_master_get_devdata(master);
-
- return pm_runtime_get_sync(tspi->dev);
-}
-
-static int tegra_slink_unprepare_transfer(struct spi_master *master)
-{
- struct tegra_slink_data *tspi = spi_master_get_devdata(master);
-
- pm_runtime_put(tspi->dev);
- return 0;
-}
-
static int tegra_slink_transfer_one_message(struct spi_master *master,
struct spi_message *msg)
{
msg->status = 0;
msg->actual_length = 0;
+ ret = pm_runtime_get_sync(tspi->dev);
+ if (ret < 0) {
+ dev_err(tspi->dev, "runtime get failed: %d\n", ret);
+ goto done;
+ }
+
single_xfer = list_is_singular(&msg->transfers);
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
INIT_COMPLETION(tspi->xfer_completion);
exit:
tegra_slink_writel(tspi, tspi->def_command_reg, SLINK_COMMAND);
tegra_slink_writel(tspi, tspi->def_command2_reg, SLINK_COMMAND2);
+ pm_runtime_put(tspi->dev);
+done:
msg->status = ret;
spi_finalize_current_message(master);
return ret;
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->setup = tegra_slink_setup;
- master->prepare_transfer_hardware = tegra_slink_prepare_transfer;
master->transfer_one_message = tegra_slink_transfer_one_message;
- master->unprepare_transfer_hardware = tegra_slink_unprepare_transfer;
master->num_chipselect = MAX_CHIP_SELECT;
master->bus_num = -1;
/* Lock queue and check for queue work */
spin_lock_irqsave(&master->queue_lock, flags);
if (list_empty(&master->queue) || !master->running) {
- if (master->busy && master->unprepare_transfer_hardware) {
- ret = master->unprepare_transfer_hardware(master);
- if (ret) {
- spin_unlock_irqrestore(&master->queue_lock, flags);
- dev_err(&master->dev,
- "failed to unprepare transfer hardware\n");
- return;
- }
+ if (!master->busy) {
+ spin_unlock_irqrestore(&master->queue_lock, flags);
+ return;
}
master->busy = false;
spin_unlock_irqrestore(&master->queue_lock, flags);
+ if (master->unprepare_transfer_hardware &&
+ master->unprepare_transfer_hardware(master))
+ dev_err(&master->dev,
+ "failed to unprepare transfer hardware\n");
return;
}
acpi_status status;
acpi_handle handle;
- handle = ACPI_HANDLE(&master->dev);
+ handle = ACPI_HANDLE(master->dev.parent);
if (!handle)
return;
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
u8 bits = 0;
dt9812_digital_in(devpriv->slot, &bits);
for (n = 0; n < insn->n; n++)
- data[n] = ((1 << insn->chanspec) & bits) != 0;
+ data[n] = ((1 << channel) & bits) != 0;
return n;
}
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
u8 bits = 0;
dt9812_digital_out_shadow(devpriv->slot, &bits);
for (n = 0; n < insn->n; n++) {
- u8 mask = 1 << insn->chanspec;
+ u8 mask = 1 << channel;
bits &= ~mask;
if (data[n])
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
for (n = 0; n < insn->n; n++) {
u16 value = 0;
- dt9812_analog_in(devpriv->slot, insn->chanspec, &value,
- DT9812_GAIN_1);
+ dt9812_analog_in(devpriv->slot, channel, &value, DT9812_GAIN_1);
data[n] = value;
}
return n;
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
u16 value;
for (n = 0; n < insn->n; n++) {
value = 0;
- dt9812_analog_out_shadow(devpriv->slot, insn->chanspec, &value);
+ dt9812_analog_out_shadow(devpriv->slot, channel, &value);
data[n] = value;
}
return n;
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
for (n = 0; n < insn->n; n++)
- dt9812_analog_out(devpriv->slot, insn->chanspec, data[n]);
+ dt9812_analog_out(devpriv->slot, channel, data[n]);
return n;
}
case TRIG_NONE:
/* continous acquisition */
devpriv->ai_continous = 1;
- devpriv->ai_sample_count = 0;
+ devpriv->ai_sample_count = 1;
break;
}
static int usbduxsub_start(struct usbduxsub *usbduxsub)
{
int errcode = 0;
- uint8_t local_transfer_buffer[16];
+ uint8_t *local_transfer_buffer;
+
+ local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to zero */
- local_transfer_buffer[0] = 0;
+ *local_transfer_buffer = 0;
errcode = usb_control_msg(usbduxsub->usbdev,
/* create a pipe for a control transfer */
usb_sndctrlpipe(usbduxsub->usbdev, 0),
1,
/* Timeout */
BULK_TIMEOUT);
- if (errcode < 0) {
+ if (errcode < 0)
dev_err(&usbduxsub->interface->dev,
"comedi_: control msg failed (start)\n");
- return errcode;
- }
- return 0;
+
+ kfree(local_transfer_buffer);
+ return errcode;
}
static int usbduxsub_stop(struct usbduxsub *usbduxsub)
{
int errcode = 0;
+ uint8_t *local_transfer_buffer;
- uint8_t local_transfer_buffer[16];
+ local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to one */
- local_transfer_buffer[0] = 1;
+ *local_transfer_buffer = 1;
errcode = usb_control_msg(usbduxsub->usbdev,
usb_sndctrlpipe(usbduxsub->usbdev, 0),
/* bRequest, "Firmware" */
1,
/* Timeout */
BULK_TIMEOUT);
- if (errcode < 0) {
+ if (errcode < 0)
dev_err(&usbduxsub->interface->dev,
"comedi_: control msg failed (stop)\n");
- return errcode;
- }
- return 0;
+
+ kfree(local_transfer_buffer);
+ return errcode;
}
static int usbduxsub_upload(struct usbduxsub *usbduxsub,
static int usbduxfastsub_start(struct usbduxfastsub_s *udfs)
{
int ret;
- unsigned char local_transfer_buffer[16];
+ unsigned char *local_transfer_buffer;
+
+ local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to zero */
- local_transfer_buffer[0] = 0;
+ *local_transfer_buffer = 0;
/* bRequest, "Firmware" */
ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
USBDUXFASTSUB_FIRMWARE,
local_transfer_buffer,
1, /* Length */
EZTIMEOUT); /* Timeout */
- if (ret < 0) {
+ if (ret < 0)
dev_err(&udfs->interface->dev,
"control msg failed (start)\n");
- return ret;
- }
- return 0;
+ kfree(local_transfer_buffer);
+ return ret;
}
static int usbduxfastsub_stop(struct usbduxfastsub_s *udfs)
{
int ret;
- unsigned char local_transfer_buffer[16];
+ unsigned char *local_transfer_buffer;
+
+ local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to one */
- local_transfer_buffer[0] = 1;
+ *local_transfer_buffer = 1;
/* bRequest, "Firmware" */
ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
USBDUXFASTSUB_FIRMWARE,
0x0000, /* Index */
local_transfer_buffer, 1, /* Length */
EZTIMEOUT); /* Timeout */
- if (ret < 0) {
+ if (ret < 0)
dev_err(&udfs->interface->dev,
"control msg failed (stop)\n");
- return ret;
- }
- return 0;
+ kfree(local_transfer_buffer);
+ return ret;
}
static int usbduxfastsub_upload(struct usbduxfastsub_s *udfs,
static int usbduxsub_start(struct usbduxsub *usbduxsub)
{
int errcode = 0;
- uint8_t local_transfer_buffer[16];
+ uint8_t *local_transfer_buffer;
+
+ local_transfer_buffer = kmalloc(16, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to zero */
local_transfer_buffer[0] = 0;
1,
/* Timeout */
BULK_TIMEOUT);
- if (errcode < 0) {
+ if (errcode < 0)
dev_err(&usbduxsub->interface->dev,
"comedi_: control msg failed (start)\n");
- return errcode;
- }
- return 0;
+
+ kfree(local_transfer_buffer);
+ return errcode;
}
static int usbduxsub_stop(struct usbduxsub *usbduxsub)
{
int errcode = 0;
+ uint8_t *local_transfer_buffer;
- uint8_t local_transfer_buffer[16];
+ local_transfer_buffer = kmalloc(16, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to one */
local_transfer_buffer[0] = 1;
1,
/* Timeout */
BULK_TIMEOUT);
- if (errcode < 0) {
+ if (errcode < 0)
dev_err(&usbduxsub->interface->dev,
"comedi_: control msg failed (stop)\n");
- return errcode;
- }
- return 0;
+
+ kfree(local_transfer_buffer);
+ return errcode;
}
static int usbduxsub_upload(struct usbduxsub *usbduxsub,
goto err_out;
}
- ipu_crtc->irq = ipu_idmac_channel_irq(ipu, ipu_crtc->ipu_ch,
- IPU_IRQ_EOF);
- ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0,
- "imx_drm", ipu_crtc);
- if (ret < 0) {
- dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret);
- goto err_out;
- }
-
- disable_irq(ipu_crtc->irq);
-
return 0;
err_out:
ipu_put_resources(ipu_crtc);
static int ipu_crtc_init(struct ipu_crtc *ipu_crtc,
struct ipu_client_platformdata *pdata)
{
+ struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
int ret;
ret = ipu_get_resources(ipu_crtc, pdata);
goto err_put_resources;
}
+ ipu_crtc->irq = ipu_idmac_channel_irq(ipu, ipu_crtc->ipu_ch,
+ IPU_IRQ_EOF);
+ ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0,
+ "imx_drm", ipu_crtc);
+ if (ret < 0) {
+ dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret);
+ goto err_put_resources;
+ }
+
+ disable_irq(ipu_crtc->irq);
+
return 0;
err_put_resources:
struct node_res_object **node_res_obj =
(struct node_res_object **)node_resource;
struct process_context *ctxt = (struct process_context *)process_ctxt;
- int status = 0;
int retval;
*node_res_obj = kzalloc(sizeof(struct node_res_object), GFP_KERNEL);
- if (!*node_res_obj) {
- status = -ENOMEM;
- goto func_end;
- }
+ if (!*node_res_obj)
+ return -ENOMEM;
(*node_res_obj)->node = hnode;
- retval = idr_get_new(ctxt->node_id, *node_res_obj,
- &(*node_res_obj)->id);
- if (retval == -EAGAIN) {
- if (!idr_pre_get(ctxt->node_id, GFP_KERNEL)) {
- pr_err("%s: OUT OF MEMORY\n", __func__);
- status = -ENOMEM;
- goto func_end;
- }
-
- retval = idr_get_new(ctxt->node_id, *node_res_obj,
- &(*node_res_obj)->id);
+ retval = idr_alloc(ctxt->node_id, *node_res_obj, 0, 0, GFP_KERNEL);
+ if (retval >= 0) {
+ (*node_res_obj)->id = retval;
+ return 0;
}
- if (retval) {
+
+ kfree(*node_res_obj);
+
+ if (retval == -ENOSPC) {
pr_err("%s: FAILED, IDR is FULL\n", __func__);
- status = -EFAULT;
+ return -EFAULT;
+ } else {
+ pr_err("%s: OUT OF MEMORY\n", __func__);
+ return -ENOMEM;
}
-func_end:
- if (status)
- kfree(*node_res_obj);
-
- return status;
}
/* Release all Node resources and its context
struct strm_res_object **pstrm_res =
(struct strm_res_object **)strm_res;
struct process_context *ctxt = (struct process_context *)process_ctxt;
- int status = 0;
int retval;
*pstrm_res = kzalloc(sizeof(struct strm_res_object), GFP_KERNEL);
- if (*pstrm_res == NULL) {
- status = -EFAULT;
- goto func_end;
- }
+ if (*pstrm_res == NULL)
+ return -EFAULT;
(*pstrm_res)->stream = stream_obj;
- retval = idr_get_new(ctxt->stream_id, *pstrm_res,
- &(*pstrm_res)->id);
- if (retval == -EAGAIN) {
- if (!idr_pre_get(ctxt->stream_id, GFP_KERNEL)) {
- pr_err("%s: OUT OF MEMORY\n", __func__);
- status = -ENOMEM;
- goto func_end;
- }
-
- retval = idr_get_new(ctxt->stream_id, *pstrm_res,
- &(*pstrm_res)->id);
+ retval = idr_alloc(ctxt->stream_id, *pstrm_res, 0, 0, GFP_KERNEL);
+ if (retval >= 0) {
+ (*pstrm_res)->id = retval;
+ return 0;
}
- if (retval) {
+
+ if (retval == -ENOSPC) {
pr_err("%s: FAILED, IDR is FULL\n", __func__);
- status = -EPERM;
+ return -EPERM;
+ } else {
+ pr_err("%s: OUT OF MEMORY\n", __func__);
+ return -ENOMEM;
}
-
-func_end:
- return status;
}
static int drv_proc_free_strm_res(int id, void *p, void *process_ctxt)
if ((~uLowNextTBTT) < uLowRemain)
qwTSF = ((qwTSF >> 32) + 1) << 32;
- qwTSF = (qwTSF & 0xffffffff00000000UL) |
+ qwTSF = (qwTSF & 0xffffffff00000000ULL) |
(u64)(uLowNextTBTT + uLowRemain);
return (qwTSF);
if (device->flags & DEVICE_FLAGS_OPENED)
device_close(device->dev);
- usb_put_dev(interface_to_usbdev(intf));
-
return 0;
}
if (!device || !device->dev)
return -ENODEV;
- usb_get_dev(interface_to_usbdev(intf));
-
if (!(device->flags & DEVICE_FLAGS_OPENED))
device_open(device->dev);
depends on CONFIGFS_FS=y && SYSFS=y && !HIGHMEM && ZCACHE=y
depends on NET
# must ensure struct page is 8-byte aligned
- select HAVE_ALIGNED_STRUCT_PAGE if !64_BIT
+ select HAVE_ALIGNED_STRUCT_PAGE if !64BIT
default n
help
RAMster allows RAM on other machines in a cluster to be utilized
static int r2net_prep_nsw(struct r2net_node *nn, struct r2net_status_wait *nsw)
{
- int ret = 0;
+ int ret;
- do {
- if (!idr_pre_get(&nn->nn_status_idr, GFP_ATOMIC)) {
- ret = -EAGAIN;
- break;
- }
- spin_lock(&nn->nn_lock);
- ret = idr_get_new(&nn->nn_status_idr, nsw, &nsw->ns_id);
- if (ret == 0)
- list_add_tail(&nsw->ns_node_item,
- &nn->nn_status_list);
- spin_unlock(&nn->nn_lock);
- } while (ret == -EAGAIN);
+ spin_lock(&nn->nn_lock);
+ ret = idr_alloc(&nn->nn_status_idr, nsw, 0, 0, GFP_ATOMIC);
+ if (ret >= 0) {
+ nsw->ns_id = ret;
+ list_add_tail(&nsw->ns_node_item, &nn->nn_status_list);
+ }
+ spin_unlock(&nn->nn_lock);
- if (ret == 0) {
+ if (ret >= 0) {
init_waitqueue_head(&nsw->ns_wq);
nsw->ns_sys_status = R2NET_ERR_NONE;
nsw->ns_status = 0;
+ return 0;
}
-
return ret;
}
{
char *endptr;
unsigned long id;
+ unsigned char id_as_uchar;
unsigned char digest[MD5_SIGNATURE_SIZE];
unsigned char type, response[MD5_SIGNATURE_SIZE * 2 + 2];
unsigned char identifier[10], *challenge = NULL;
goto out;
}
- sg_init_one(&sg, &id, 1);
+ /* To handle both endiannesses */
+ id_as_uchar = id;
+ sg_init_one(&sg, &id_as_uchar, 1);
ret = crypto_hash_update(&desc, &sg, 1);
if (ret < 0) {
pr_err("crypto_hash_update() failed for id\n");
#define FD_DEVICE_QUEUE_DEPTH 32
#define FD_MAX_DEVICE_QUEUE_DEPTH 128
#define FD_BLOCKSIZE 512
-#define FD_MAX_SECTORS 1024
+#define FD_MAX_SECTORS 2048
#define RRF_EMULATE_CDB 0x01
#define RRF_GOT_LBA 0x02
pr_debug("PSCSI: i: %d page: %p len: %d off: %d\n", i,
page, len, off);
- while (len > 0 && data_len > 0) {
+ /*
+ * We only have one page of data in each sg element,
+ * we can not cross a page boundary.
+ */
+ if (off + len > PAGE_SIZE)
+ goto fail;
+
+ if (len > 0 && data_len > 0) {
bytes = min_t(unsigned int, len, PAGE_SIZE - off);
bytes = min(bytes, data_len);
bio = NULL;
}
- len -= bytes;
data_len -= bytes;
- off = 0;
}
}
break;
case SYNCHRONIZE_CACHE:
case SYNCHRONIZE_CACHE_16:
- if (!ops->execute_sync_cache)
- return TCM_UNSUPPORTED_SCSI_OPCODE;
+ if (!ops->execute_sync_cache) {
+ size = 0;
+ cmd->execute_cmd = sbc_emulate_noop;
+ break;
+ }
/*
* Extract LBA and range to be flushed for emulated SYNCHRONIZE_CACHE
if (se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL) {
if (core_tpg_setup_virtual_lun0(se_tpg) < 0) {
- kfree(se_tpg);
+ array_free(se_tpg->tpg_lun_list,
+ TRANSPORT_MAX_LUNS_PER_TPG);
return -ENOMEM;
}
}
return ret;
ret = target_check_reservation(cmd);
- if (ret)
+ if (ret) {
+ cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT;
return ret;
+ }
ret = dev->transport->parse_cdb(cmd);
if (ret)
if (!priv)
return -ENOMEM;
- priv->sensor = devm_request_and_ioremap(&pdev->dev, res);
- if (!priv->sensor) {
- dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
- return -EADDRNOTAVAIL;
- }
+ priv->sensor = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->sensor))
+ return PTR_ERR(priv->sensor);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!res) {
dev_err(&pdev->dev, "Failed to get platform resource\n");
return -ENODEV;
}
- priv->control = devm_request_and_ioremap(&pdev->dev, res);
- if (!priv->control) {
- dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
- return -EADDRNOTAVAIL;
- }
+ priv->control = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->control))
+ return PTR_ERR(priv->control);
ret = dove_init_sensor(priv);
if (ret) {
#include <linux/cpu_cooling.h>
#include <linux/of.h>
-#include <plat/cpu.h>
-
/* Exynos generic registers */
#define EXYNOS_TMU_REG_TRIMINFO 0x0
#define EXYNOS_TMU_REG_CONTROL 0x20
if (IS_ERR(th_zone->therm_dev)) {
pr_err("Failed to register thermal zone device\n");
- ret = -EINVAL;
+ ret = PTR_ERR(th_zone->therm_dev);
goto err_unregister;
}
th_zone->mode = THERMAL_DEVICE_ENABLED;
if (!priv)
return -ENOMEM;
- priv->sensor = devm_request_and_ioremap(&pdev->dev, res);
- if (!priv->sensor) {
- dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
- return -EADDRNOTAVAIL;
- }
+ priv->sensor = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->sensor))
+ return PTR_ERR(priv->sensor);
thermal = thermal_zone_device_register("kirkwood_thermal", 0, 0,
priv, &ops, NULL, 0, 0);
struct device *dev = rcar_priv_to_dev(priv);
int i;
int ctemp, old, new;
+ int ret = -EINVAL;
mutex_lock(&priv->lock);
if (!ctemp) {
dev_err(dev, "thermal sensor was broken\n");
- return -EINVAL;
+ goto err_out_unlock;
}
/*
dev_dbg(dev, "thermal%d %d -> %d\n", priv->id, priv->ctemp, ctemp);
priv->ctemp = ctemp;
-
+ ret = 0;
+err_out_unlock:
mutex_unlock(&priv->lock);
-
- return 0;
+ return ret;
}
static int rcar_thermal_get_temp(struct thermal_zone_device *zone,
struct resource *res, *irq;
int mres = 0;
int i;
+ int ret = -ENODEV;
int idle = IDLE_INTERVAL;
common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
/*
* rcar_has_irq_support() will be enabled
*/
- common->base = devm_request_and_ioremap(dev, res);
- if (!common->base) {
- dev_err(dev, "Unable to ioremap thermal register\n");
- return -ENOMEM;
- }
+ common->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(common->base))
+ return PTR_ERR(common->base);
/* enable temperature comparation */
rcar_thermal_common_write(common, ENR, 0x00030303);
return -ENOMEM;
}
- priv->base = devm_request_and_ioremap(dev, res);
- if (!priv->base) {
- dev_err(dev, "Unable to ioremap priv register\n");
- return -ENOMEM;
- }
+ priv->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
priv->common = common;
priv->id = i;
idle);
if (IS_ERR(priv->zone)) {
dev_err(dev, "can't register thermal zone\n");
+ ret = PTR_ERR(priv->zone);
goto error_unregister;
}
rcar_thermal_for_each_priv(priv, common)
thermal_zone_device_unregister(priv->zone);
- return -ENODEV;
+ return ret;
}
static int rcar_thermal_remove(struct platform_device *pdev)
},
[PORT_8250_CIR] = {
.name = "CIR port"
- }
+ },
+ [PORT_ALTR_16550_F32] = {
+ .name = "Altera 16550 FIFO32",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F64] = {
+ .name = "Altera 16550 FIFO64",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F128] = {
+ .name = "Altera 16550 FIFO128",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};
/* Uart divisor latch read */
MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
#endif
MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+
+#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
+#ifndef MODULE
+/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name
+ * working as well for the module options so we don't break people. We
+ * need to keep the names identical and the convenient macros will happily
+ * refuse to let us do that by failing the build with redefinition errors
+ * of global variables. So we stick them inside a dummy function to avoid
+ * those conflicts. The options still get parsed, and the redefined
+ * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive.
+ *
+ * This is hacky. I'm sorry.
+ */
+static void __used s8250_options(void)
+{
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "8250_core."
+
+ module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644);
+ module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644);
+ module_param_cb(skip_txen_test, ¶m_ops_uint, &skip_txen_test, 0644);
+#ifdef CONFIG_SERIAL_8250_RSA
+ __module_param_call(MODULE_PARAM_PREFIX, probe_rsa,
+ ¶m_array_ops, .arr = &__param_arr_probe_rsa,
+ 0444, -1);
+#endif
+}
+#else
+MODULE_ALIAS("8250_core");
+#endif
+#endif
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
#define PCI_VENDOR_ID_WCH 0x4348
+#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253
#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453
#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046
#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
/*
* Master list of serial port init/setup/exit quirks.
.setup = pci_default_setup,
.exit = pci_plx9050_exit,
},
- {
- .vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_9050,
- .subvendor = PCI_VENDOR_ID_PLX,
- .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
- .init = pci_plx9050_init,
- .setup = pci_default_setup,
- .exit = pci_plx9050_exit,
- },
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_ROMULUS,
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch353_setup,
},
+ /* WCH CH352 2S card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH352_2S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
/*
* ASIX devices with FIFO bug
*/
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_VENDOR_ID_PLX,
PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
- pbn_b0_4_115200 },
+ pbn_b2_4_115200 },
+ /* Unknown card - subdevice 0x1588 */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_VENDOR_ID_PLX,
+ PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0,
+ pbn_b2_8_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_KEYSPAN,
PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
PCI_VENDOR_ID_IBM, 0x0299,
0, 0, pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+ 0x1000, 0x0012,
+ 0, 0, pbn_b0_bt_2_115200 },
+
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_bt_2_115200 },
+
/*
* Commtech, Inc. Fastcom adapters
*/
{
struct uart_8250_port uart;
int ret, line, flags = dev_id->driver_data;
+ struct resource *res = NULL;
if (flags & UNKNOWN_DEV) {
ret = serial_pnp_guess_board(dev);
memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
uart.port.irq = pnp_irq(dev, 0);
- if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
- uart.port.iobase = pnp_port_start(dev, 2);
- uart.port.iotype = UPIO_PORT;
- } else if (pnp_port_valid(dev, 0)) {
- uart.port.iobase = pnp_port_start(dev, 0);
+ if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
+ res = pnp_get_resource(dev, IORESOURCE_IO, 2);
+ else if (pnp_port_valid(dev, 0))
+ res = pnp_get_resource(dev, IORESOURCE_IO, 0);
+ if (pnp_resource_enabled(res)) {
+ uart.port.iobase = res->start;
uart.port.iotype = UPIO_PORT;
} else if (pnp_mem_valid(dev, 0)) {
uart.port.mapbase = pnp_mem_start(dev, 0);
Most people will say Y or M here, so that they can use serial mice,
modems and similar devices connecting to the standard serial ports.
+config SERIAL_8250_DEPRECATED_OPTIONS
+ bool "Support 8250_core.* kernel options (DEPRECATED)"
+ depends on SERIAL_8250
+ default y
+ ---help---
+ In 3.7 we renamed 8250 to 8250_core by mistake, so now we have to
+ accept kernel parameters in both forms like 8250_core.nr_uarts=4 and
+ 8250.nr_uarts=4. We now renamed the module back to 8250, but if
+ anybody noticed in 3.7 and changed their userspace we still have to
+ keep the 8350_core.* options around until they revert the changes
+ they already did.
+
+ If 8250 is built as a module, this adds 8250_core alias instead.
+
+ If you did not notice yet and/or you have userspace from pre-3.7, it
+ is safe (and recommended) to say N here.
+
config SERIAL_8250_PNP
bool "8250/16550 PNP device support" if EXPERT
depends on SERIAL_8250 && PNP
# Makefile for the 8250 serial device drivers.
#
-obj-$(CONFIG_SERIAL_8250) += 8250_core.o
-8250_core-y := 8250.o
-8250_core-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
-8250_core-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
+obj-$(CONFIG_SERIAL_8250) += 8250.o
+8250-y := 8250_core.o
+8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
+8250-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
config SERIAL_SAMSUNG_UARTS_4
bool
depends on PLAT_SAMSUNG
- default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
+ default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
help
Internal node for the common case of 4 Samsung compatible UARTs
config SERIAL_SAMSUNG_UARTS
int
depends on PLAT_SAMSUNG
- default 6 if ARCH_S5P6450
+ default 6 if CPU_S5P6450
default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
default 3
help
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-static unsigned long atmel_ports_in_use;
+static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART);
#ifdef SUPPORT_SYSRQ
static struct console atmel_console;
if (ret < 0)
/* port id not found in platform data nor device-tree aliases:
* auto-enumerate it */
- ret = find_first_zero_bit(&atmel_ports_in_use,
- sizeof(atmel_ports_in_use));
+ ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART);
- if (ret > ATMEL_MAX_UART) {
+ if (ret >= ATMEL_MAX_UART) {
ret = -ENODEV;
goto err;
}
- if (test_and_set_bit(ret, &atmel_ports_in_use)) {
+ if (test_and_set_bit(ret, atmel_ports_in_use)) {
/* port already in use */
ret = -EBUSY;
goto err;
/* "port" is allocated statically, so we shouldn't free it */
- clear_bit(port->line, &atmel_ports_in_use);
+ clear_bit(port->line, atmel_ports_in_use);
clk_put(atmel_port->clk);
*/
static void bcm_uart_do_rx(struct uart_port *port)
{
- struct tty_port *port = &port->state->port;
+ struct tty_port *tty_port = &port->state->port;
unsigned int max_count;
/* limit number of char read in interrupt, should not be
bcm_uart_writel(port, val, UART_CTL_REG);
port->icount.overrun++;
- tty_insert_flip_char(port, 0, TTY_OVERRUN);
+ tty_insert_flip_char(tty_port, 0, TTY_OVERRUN);
}
if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
if ((cstat & port->ignore_status_mask) == 0)
- tty_insert_flip_char(port, c, flag);
+ tty_insert_flip_char(tty_port, c, flag);
} while (--max_count);
- tty_flip_buffer_push(port);
+ tty_flip_buffer_push(tty_port);
}
/*
return 0;
psc_num = (port->mapbase & 0xf00) >> 8;
- snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num);
+ snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num);
psc_clk = clk_get(port->dev, clk_name);
if (IS_ERR(psc_clk)) {
dev_err(port->dev, "Failed to get PSC clock entry!\n");
{ .compatible = "ns16850", .data = (void *)PORT_16850, },
{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
{ .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
+ { .compatible = "altr,16550-FIFO32",
+ .data = (void *)PORT_ALTR_16550_F32, },
+ { .compatible = "altr,16550-FIFO64",
+ .data = (void *)PORT_ALTR_16550_F64, },
+ { .compatible = "altr,16550-FIFO128",
+ .data = (void *)PORT_ALTR_16550_F128, },
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
{ .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
#define UART_NR 4
static struct uart_sunsu_port sunsu_ports[UART_NR];
+static int nr_inst; /* Number of already registered ports */
#ifdef CONFIG_SERIO
printk("Console: ttyS%d (SU)\n",
(sunsu_reg.minor - 64) + co->index);
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- if (co->index >= UART_NR)
- co->index = 0;
+ if (co->index > nr_inst)
+ return -ENODEV;
port = &sunsu_ports[co->index].port;
/*
static int su_probe(struct platform_device *op)
{
- static int inst;
struct device_node *dp = op->dev.of_node;
struct uart_sunsu_port *up;
struct resource *rp;
type = su_get_type(dp);
if (type == SU_PORT_PORT) {
- if (inst >= UART_NR)
+ if (nr_inst >= UART_NR)
return -EINVAL;
- up = &sunsu_ports[inst];
+ up = &sunsu_ports[nr_inst];
} else {
up = kzalloc(sizeof(*up), GFP_KERNEL);
if (!up)
return -ENOMEM;
}
- up->port.line = inst;
+ up->port.line = nr_inst;
spin_lock_init(&up->port.lock);
}
dev_set_drvdata(&op->dev, up);
+ nr_inst++;
+
return 0;
}
dev_set_drvdata(&op->dev, up);
- inst++;
+ nr_inst++;
return 0;
vt8500_port->uart.dev = &pdev->dev;
vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
- vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
- if (!IS_ERR(vt8500_port->clk)) {
- vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
- } else {
- /* use the default of 24Mhz if not specified and warn */
- pr_warn("%s: serial clock source not specified\n", __func__);
- vt8500_port->uart.uartclk = 24000000;
- }
+ vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
snprintf(vt8500_port->name, sizeof(vt8500_port->name),
"VT8500 UART%d", pdev->id);
/* Receive Timeout register is enabled with value of 10 */
xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
+ /* Clear out any pending interrupts before enabling them */
+ xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
/* Set the Interrupt Registers with desired interrupts */
xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |
struct tty_ldisc *disc;
tty = port->itty;
- if (WARN_RATELIMIT(tty == NULL, "tty is NULL\n"))
+ if (tty == NULL)
return;
disc = tty_ldisc_ref(tty);
static struct vcs_poll_data *
vcs_poll_data_get(struct file *file)
{
- struct vcs_poll_data *poll = file->private_data;
+ struct vcs_poll_data *poll = file->private_data, *kill = NULL;
if (poll)
return poll;
file->private_data = poll;
} else {
/* someone else raced ahead of us */
- vcs_poll_data_free(poll);
+ kill = poll;
poll = file->private_data;
}
spin_unlock(&file->f_lock);
+ if (kill)
+ vcs_poll_data_free(kill);
return poll;
}
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
-obj-$(CONFIG_USB_COMMON) += phy/
+obj-$(CONFIG_USB_OTG_UTILS) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
#define TD_PIDEP_OFFSET 0x04
#define TD_PIDEPMASK_PID 0xF0
#define TD_PIDEPMASK_EP 0x0F
-#define TD_PORTLENMASK_DL 0x02FF
+#define TD_PORTLENMASK_DL 0x03FF
#define TD_PORTLENMASK_PN 0xC000
#define TD_STATUS_OFFSET 0x07
{
struct c67x00_td *td;
struct c67x00_urb_priv *urbp = urb->hcpriv;
- const __u8 active_flag = 1, retry_cnt = 1;
+ const __u8 active_flag = 1, retry_cnt = 3;
__u8 cmd = 0;
int tt = 0;
goto put_transceiver;
}
- retval = dbg_create_files(&ci->gadget.dev);
+ retval = dbg_create_files(ci->dev);
if (retval)
goto unreg_device;
dev_err(dev, "error = %i\n", retval);
remove_dbg:
- dbg_remove_files(&ci->gadget.dev);
+ dbg_remove_files(ci->dev);
unreg_device:
device_unregister(&ci->gadget.dev);
put_transceiver:
if (ci->global_phy)
usb_put_phy(ci->transceiver);
}
- dbg_remove_files(&ci->gadget.dev);
+ dbg_remove_files(ci->dev);
device_unregister(&ci->gadget.dev);
/* my kobject is dynamic, I swear! */
memset(&ci->gadget, 0, sizeof(ci->gadget));
dev_dbg(&acm->control->dev, "%s\n", __func__);
- tty_unregister_device(acm_tty_driver, acm->minor);
acm_release_minor(acm);
usb_put_intf(acm->control);
kfree(acm->country_codes);
int num_rx_buf;
int i;
int combined_interfaces = 0;
+ struct device *tty_dev;
+ int rv = -ENOMEM;
/* normal quirks */
quirks = (unsigned long)id->driver_info;
usb_set_intfdata(data_interface, acm);
usb_get_intf(control_interface);
- tty_port_register_device(&acm->port, acm_tty_driver, minor,
+ tty_dev = tty_port_register_device(&acm->port, acm_tty_driver, minor,
&control_interface->dev);
+ if (IS_ERR(tty_dev)) {
+ rv = PTR_ERR(tty_dev);
+ goto alloc_fail8;
+ }
return 0;
+alloc_fail8:
+ if (acm->country_codes) {
+ device_remove_file(&acm->control->dev,
+ &dev_attr_wCountryCodes);
+ device_remove_file(&acm->control->dev,
+ &dev_attr_iCountryCodeRelDate);
+ }
+ device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
alloc_fail7:
+ usb_set_intfdata(intf, NULL);
for (i = 0; i < ACM_NW; i++)
usb_free_urb(acm->wb[i].urb);
alloc_fail6:
acm_release_minor(acm);
kfree(acm);
alloc_fail:
- return -ENOMEM;
+ return rv;
}
static void stop_data_traffic(struct acm *acm)
stop_data_traffic(acm);
+ tty_unregister_device(acm_tty_driver, acm->minor);
+
usb_free_urb(acm->ctrlurb);
for (i = 0; i < ACM_NW; i++)
usb_free_urb(acm->wb[i].urb);
#define WDM_RESPONDING 7
#define WDM_SUSPENDING 8
#define WDM_RESETTING 9
+#define WDM_OVERFLOW 10
#define WDM_MAX 16
{
struct wdm_device *desc = urb->context;
int status = urb->status;
+ int length = urb->actual_length;
spin_lock(&desc->iuspin);
clear_bit(WDM_RESPONDING, &desc->flags);
}
desc->rerr = status;
- desc->reslength = urb->actual_length;
- memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength);
- desc->length += desc->reslength;
+ if (length + desc->length > desc->wMaxCommand) {
+ /* The buffer would overflow */
+ set_bit(WDM_OVERFLOW, &desc->flags);
+ } else {
+ /* we may already be in overflow */
+ if (!test_bit(WDM_OVERFLOW, &desc->flags)) {
+ memmove(desc->ubuf + desc->length, desc->inbuf, length);
+ desc->length += length;
+ desc->reslength = length;
+ }
+ }
skip_error:
wake_up(&desc->wait);
rv = -ENODEV;
goto err;
}
+ if (test_bit(WDM_OVERFLOW, &desc->flags)) {
+ clear_bit(WDM_OVERFLOW, &desc->flags);
+ rv = -ENOBUFS;
+ goto err;
+ }
i++;
if (file->f_flags & O_NONBLOCK) {
if (!test_bit(WDM_READ, &desc->flags)) {
spin_unlock_irq(&desc->iuspin);
goto retry;
}
+
if (!desc->reslength) { /* zero length read */
dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
clear_bit(WDM_READ, &desc->flags);
struct wdm_device *desc = wdm_find_device(intf);
int rv;
+ clear_bit(WDM_OVERFLOW, &desc->flags);
clear_bit(WDM_RESETTING, &desc->flags);
rv = recover_from_urb_loss(desc);
mutex_unlock(&desc->wlock);
struct hc_driver *driver;
struct usb_hcd *hcd;
int retval;
+ int hcd_irq = 0;
if (usb_disabled())
return -ENODEV;
return -ENODEV;
dev->current_state = PCI_D0;
- /* The xHCI driver supports MSI and MSI-X,
- * so don't fail if the BIOS doesn't provide a legacy IRQ.
+ /*
+ * The xHCI driver has its own irq management
+ * make sure irq setup is not touched for xhci in generic hcd code
*/
- if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
- dev_err(&dev->dev,
- "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
- pci_name(dev));
- retval = -ENODEV;
- goto disable_pci;
+ if ((driver->flags & HCD_MASK) != HCD_USB3) {
+ if (!dev->irq) {
+ dev_err(&dev->dev,
+ "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
+ pci_name(dev));
+ retval = -ENODEV;
+ goto disable_pci;
+ }
+ hcd_irq = dev->irq;
}
hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
pci_set_master(dev);
- retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+ retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
if (retval != 0)
goto unmap_registers;
set_hs_companion(dev, hcd);
}
EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
+int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+ if (!hcd->driver->find_raw_port_number)
+ return port1;
+
+ return hcd->driver->find_raw_port_number(hcd, port1);
+}
+
static int usb_hcd_request_irqs(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags)
{
{
struct usb_port *port_dev = to_usb_port(dev);
- dev_pm_qos_hide_flags(dev);
kfree(port_dev);
}
#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/pci.h>
+#include <linux/usb/hcd.h>
#include <acpi/acpi_bus.h>
#include "usb.h"
* connected to.
*/
if (!udev->parent) {
- *handle = acpi_get_child(DEVICE_ACPI_HANDLE(&udev->dev),
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+ int raw_port_num;
+
+ raw_port_num = usb_hcd_find_raw_port_number(hcd,
port_num);
+ *handle = acpi_get_child(DEVICE_ACPI_HANDLE(&udev->dev),
+ raw_port_num);
if (!*handle)
return -ENODEV;
} else {
break;
}
+ dwc3_free_event_buffers(dwc);
dwc3_core_exit(dwc);
return 0;
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/of.h>
-#include "core.h"
-
struct dwc3_exynos {
struct platform_device *dwc3;
struct platform_device *usb2_phy;
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
-#include "core.h"
-
/*
* All these registers belong to OMAP's Wrapper around the
* DesignWare USB3 Core.
return 0;
}
-static const struct of_device_id of_dwc3_matach[] = {
+static const struct of_device_id of_dwc3_match[] = {
{
"ti,dwc3",
},
{ },
};
-MODULE_DEVICE_TABLE(of, of_dwc3_matach);
+MODULE_DEVICE_TABLE(of, of_dwc3_match);
static struct platform_driver dwc3_omap_driver = {
.probe = dwc3_omap_probe,
.remove = dwc3_omap_remove,
.driver = {
.name = "omap-dwc3",
- .of_match_table = of_dwc3_matach,
+ .of_match_table = of_dwc3_match,
},
};
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
-#include "core.h"
-
/* FIXME define these in <linux/pci_ids.h> */
#define PCI_VENDOR_ID_SYNOPSYS 0x16c3
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
DWC3_TRBCTL_CONTROL_DATA);
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
&& (dep->number == 0)) {
- u32 transfer_size;
+ u32 transfer_size;
+ u32 maxpacket;
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
dep->number);
WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE);
- transfer_size = roundup(req->request.length,
- (u32) dep->endpoint.maxpacket);
+ maxpacket = dep->endpoint.maxpacket;
+ transfer_size = roundup(req->request.length, maxpacket);
dwc->ep0_bounced = true;
static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
{
- struct dwc3_gadget_ep_cmd_params params;
struct dwc3_ep *dep;
int ret;
u32 reg;
dev_vdbg(dwc->dev, "%s\n", __func__);
- memset(¶ms, 0x00, sizeof(params));
-
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
speed = reg & DWC3_DSTS_CONNECTSPD;
dwc->speed = speed;
tristate "LPC32XX USB Peripheral Controller"
depends on ARCH_LPC32XX
select USB_ISP1301
+ select USB_OTG_UTILS
help
This option selects the USB device controller in the LPC32xx SoC.
obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o
+# USB Functions
+obj-$(CONFIG_USB_F_ACM) += f_acm.o
+f_ss_lb-y := f_loopback.o f_sourcesink.o
+obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o
+obj-$(CONFIG_USB_U_SERIAL) += u_serial.o
+
#
# USB gadget drivers
#
obj-$(CONFIG_USB_G_NCM) += g_ncm.o
obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o
obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o
-
-# USB Functions
-obj-$(CONFIG_USB_F_ACM) += f_acm.o
-f_ss_lb-y := f_loopback.o f_sourcesink.o
-obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o
-obj-$(CONFIG_USB_U_SERIAL) += u_serial.o
/**
* usb_composite_probe() - register a composite driver
* @driver: the driver to register
- * @bind: the callback used to allocate resources that are shared across the
- * whole device, such as string IDs, and add its configurations using
- * @usb_add_config(). This may fail by returning a negative errno
- * value; it should return zero on successful initialization.
+ *
* Context: single threaded during gadget setup
*
* This function is used to register drivers using the composite driver
static void rndis_command_complete(struct usb_ep *ep, struct usb_request *req)
{
struct f_rndis *rndis = req->context;
- struct usb_composite_dev *cdev = rndis->port.func.config->cdev;
int status;
/* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
// spin_lock(&dev->lock);
status = rndis_msg_parser(rndis->config, (u8 *) req->buf);
if (status < 0)
- ERROR(cdev, "RNDIS command error %d, %d/%d\n",
+ pr_err("RNDIS command error %d, %d/%d\n",
status, req->actual, req->length);
// spin_unlock(&dev->lock);
}
req->context = audio;
req->complete = f_audio_complete;
+ len = min_t(size_t, sizeof(value), len);
memcpy(req->buf, &value, len);
return len;
goto error;
gfs_dev_desc.iProduct = gfs_strings[USB_GADGET_PRODUCT_IDX].id;
- for (i = func_num; --i; ) {
+ for (i = func_num; i--; ) {
ret = functionfs_bind(ffs_tab[i].ffs_data, cdev);
if (unlikely(ret < 0)) {
while (++i < func_num)
gether_cleanup();
gfs_ether_setup = false;
- for (i = func_num; --i; )
+ for (i = func_num; i--; )
if (ffs_tab[i].ffs_data)
functionfs_unbind(ffs_tab[i].ffs_data);
struct usb_gadget_driver *driver)
{
struct imx_udc_struct *imx_usb;
- int retval;
imx_usb = container_of(gadget, struct imx_udc_struct, gadget);
/* first hook up the driver ... */
imx_usb->driver = driver;
imx_usb->gadget.dev.driver = &driver->driver;
- retval = device_add(&imx_usb->gadget.dev);
- if (retval)
- goto fail;
-
D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n",
__func__, driver->driver.name);
imx_udc_enable(imx_usb);
return 0;
-fail:
- imx_usb->driver = NULL;
- imx_usb->gadget.dev.driver = NULL;
- return retval;
}
static int imx_udc_stop(struct usb_gadget *gadget,
imx_usb->gadget.dev.driver = NULL;
imx_usb->driver = NULL;
- device_del(&imx_usb->gadget.dev);
-
D_INI(imx_usb->dev, "<%s> unregistered gadget driver '%s'\n",
__func__, driver->driver.name);
imx_usb->gadget.dev.parent = &pdev->dev;
imx_usb->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ ret = device_add(&imx_usb->gadget.dev);
+ if (retval)
+ goto fail4;
+
platform_set_drvdata(pdev, imx_usb);
usb_init_data(imx_usb);
ret = usb_add_gadget_udc(&pdev->dev, &imx_usb->gadget);
if (ret)
- goto fail4;
+ goto fail5;
return 0;
+fail5:
+ device_unregister(&imx_usb->gadget.dev);
fail4:
for (i = 0; i < IMX_USB_NB_EP + 1; i++)
free_irq(imx_usb->usbd_int[i], imx_usb);
int i;
usb_del_gadget_udc(&imx_usb->gadget);
+ device_unregister(&imx_usb->gadget.dev);
imx_udc_disable(imx_usb);
del_timer(&imx_usb->timer);
};
#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-#ifdef CONFIG_USB_GADGET_NET2272_DMA
+#ifdef CONFIG_USB_NET2272_DMA
/*
* use_dma: the NET2272 can use an external DMA controller.
* Note that since there is no generic DMA api, some functions,
for (i = 0; i < 4; ++i)
net2272_dequeue_all(&dev->ep[i]);
+ /* report disconnect; the driver is already quiesced */
+ if (driver) {
+ spin_unlock(&dev->lock);
+ driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+
net2272_usb_reinit(dev);
}
err_func:
device_remove_file (&dev->pdev->dev, &dev_attr_function);
err_unbind:
- driver->unbind (&dev->gadget);
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
return retval;
for (i = 0; i < 7; i++)
nuke (&dev->ep [i]);
+ /* report disconnect; the driver is already quiesced */
+ if (driver) {
+ spin_unlock(&dev->lock);
+ driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+
usb_reinit (dev);
}
#define DRIVER_VERSION "4 October 2004"
#define OMAP_DMA_USB_W2FC_TX0 29
+#define OMAP_DMA_USB_W2FC_RX0 26
/*
* The OMAP UDC needs _very_ early endpoint setup: before enabling the
}
static int omap_udc_start(struct usb_gadget *g,
- struct usb_gadget_driver *driver)
+ struct usb_gadget_driver *driver);
static int omap_udc_stop(struct usb_gadget *g,
struct usb_gadget_driver *driver);
dev->gadget.dev.driver = &driver->driver;
dev->pullup = 1;
- retval = device_add (&dev->gadget.dev);
- if (retval) {
- dev->driver = NULL;
- dev->gadget.dev.driver = NULL;
- return retval;
- }
-
/* ... then enable host detection and ep0; and we're ready
* for set_configuration as well as eventual disconnect.
*/
}
del_timer_sync(&dev->timer);
+ /* report disconnect; the driver is already quiesced */
+ if (driver)
+ driver->disconnect(&dev->gadget);
+
/* re-init driver-visible data structures */
udc_reinit(dev);
}
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
- device_del (&dev->gadget.dev);
dump_state(dev);
return 0;
dev->gadget.dev.parent = &pdev->dev;
dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ retval = device_add(&dev->gadget.dev);
+ if (retval) {
+ dev->driver = NULL;
+ dev->gadget.dev.driver = NULL;
+ goto err_device_add;
+ }
+
the_controller = dev;
platform_set_drvdata(pdev, dev);
free_irq(irq, dev);
#endif
err_irq1:
+ device_unregister(&dev->gadget.dev);
+ err_device_add:
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
err_gpio_pullup:
{
struct pxa25x_udc *dev = platform_get_drvdata(pdev);
- usb_del_gadget_udc(&dev->gadget);
if (dev->driver)
return -EBUSY;
+ usb_del_gadget_udc(&dev->gadget);
+ device_unregister(&dev->gadget.dev);
dev->pullup = 0;
pullup(dev);
udc->gadget.dev.driver = &driver->driver;
dplus_pullup(udc, 1);
- retval = device_add(&udc->gadget.dev);
- if (retval) {
- dev_err(udc->dev, "device_add error %d\n", retval);
- goto fail;
- }
if (!IS_ERR_OR_NULL(udc->transceiver)) {
retval = otg_set_peripheral(udc->transceiver->otg,
&udc->gadget);
udc->driver = NULL;
- device_del(&udc->gadget.dev);
if (!IS_ERR_OR_NULL(udc->transceiver))
return otg_set_peripheral(udc->transceiver->otg, NULL);
driver_name, udc->irq, retval);
goto err_irq;
}
+
+ retval = device_add(&udc->gadget.dev);
+ if (retval) {
+ dev_err(udc->dev, "device_add error %d\n", retval);
+ goto err_dev_add;
+ }
+
retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (retval)
goto err_add_udc;
pxa_init_debugfs(udc);
+
return 0;
+
err_add_udc:
+ device_unregister(&udc->gadget.dev);
+err_dev_add:
free_irq(udc->irq, udc);
err_irq:
iounmap(udc->regs);
int gpio = udc->mach->gpio_pullup;
usb_del_gadget_udc(&udc->gadget);
+ device_del(&udc->gadget.dev);
usb_gadget_unregister_driver(udc->driver);
free_irq(udc->irq, udc);
pxa_cleanup_debugfs(udc);
static int s3c2410_udc_start(struct usb_gadget *g,
struct usb_gadget_driver *driver)
{
- struct s3c2410_udc *udc = to_s3c2410(g)
- int retval;
+ struct s3c2410_udc *udc = to_s3c2410(g);
dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name);
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
- /* Bind the driver */
- retval = device_add(&udc->gadget.dev);
- if (retval) {
- dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
- goto register_error;
- }
-
/* Enable udc */
s3c2410_udc_enable(udc);
return 0;
-
-register_error:
- udc->driver = NULL;
- udc->gadget.dev.driver = NULL;
- return retval;
}
static int s3c2410_udc_stop(struct usb_gadget *g,
{
struct s3c2410_udc *udc = to_s3c2410(g);
- device_del(&udc->gadget.dev);
udc->driver = NULL;
/* Disable udc */
udc->gadget.dev.parent = &pdev->dev;
udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ /* Bind the driver */
+ retval = device_add(&udc->gadget.dev);
+ if (retval) {
+ dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
+ goto err_device_add;
+ }
+
the_controller = udc;
platform_set_drvdata(pdev, udc);
err_int:
free_irq(IRQ_USBD, udc);
err_map:
+ device_unregister(&udc->gadget.dev);
+err_device_add:
iounmap(base_addr);
err_mem:
release_mem_region(rsrc_start, rsrc_len);
dev_dbg(&pdev->dev, "%s()\n", __func__);
- usb_del_gadget_udc(&udc->gadget);
if (udc->driver)
return -EBUSY;
+ usb_del_gadget_udc(&udc->gadget);
+ device_unregister(&udc->gadget.dev);
debugfs_remove(udc->regs_info);
if (udc_info && !udc_info->udc_command &&
pr_debug(fmt, ##arg)
#endif /* pr_vdebug */
#else
-#ifndef pr_vdebig
+#ifndef pr_vdebug
#define pr_vdebug(fmt, arg...) \
({ if (0) pr_debug(fmt, ##arg); })
#endif /* pr_vdebug */
snd = &card->playback;
snd->filp = filp_open(fn_play, O_WRONLY, 0);
if (IS_ERR(snd->filp)) {
+ int ret = PTR_ERR(snd->filp);
+
ERROR(card, "No such PCM playback device: %s\n", fn_play);
snd->filp = NULL;
+ return ret;
}
pcm_file = snd->filp->private_data;
snd->substream = pcm_file->substream;
usb_gadget_disconnect(udc->gadget);
udc->driver->disconnect(udc->gadget);
udc->driver->unbind(udc->gadget);
- usb_gadget_udc_stop(udc->gadget, udc->driver);
+ usb_gadget_udc_stop(udc->gadget, NULL);
udc->driver = NULL;
udc->dev.driver = NULL;
static void end_unlink_async(struct ehci_hcd *ehci);
static void unlink_empty_async(struct ehci_hcd *ehci);
+static void unlink_empty_async_suspended(struct ehci_hcd *ehci);
static void ehci_work(struct ehci_hcd *ehci);
static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
/* guard against (alleged) silicon errata */
if (cmd & CMD_IAAD)
ehci_dbg(ehci, "IAA with IAAD still set?\n");
- if (ehci->async_iaa) {
+ if (ehci->async_iaa)
COUNT(ehci->stats.iaa);
- end_unlink_async(ehci);
- } else
- ehci_dbg(ehci, "IAA with nothing unlinked?\n");
+ end_unlink_async(ehci);
}
/* remote wakeup [4.3.1] */
ehci->rh_state = EHCI_RH_SUSPENDED;
end_unlink_async(ehci);
- unlink_empty_async(ehci);
+ unlink_empty_async_suspended(ehci);
ehci_handle_intr_unlinks(ehci);
end_free_itds(ehci);
* qtd is updated in qh_completions(). Update the QH
* overlay here.
*/
- if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+ if (qh->hw->hw_token & ACTIVE_BIT(ehci)) {
qh->hw->hw_qtd_next = qtd->hw_next;
qtd = NULL;
}
else if (last_status == -EINPROGRESS && !urb->unlinked)
continue;
- /* qh unlinked; token in overlay may be most current */
- if (state == QH_STATE_IDLE
- && cpu_to_hc32(ehci, qtd->qtd_dma)
- == hw->hw_current) {
+ /*
+ * If this was the active qtd when the qh was unlinked
+ * and the overlay's token is active, then the overlay
+ * hasn't been written back to the qtd yet so use its
+ * token instead of the qtd's. After the qtd is
+ * processed and removed, the overlay won't be valid
+ * any more.
+ */
+ if (state == QH_STATE_IDLE &&
+ qh->qtd_list.next == &qtd->qtd_list &&
+ (hw->hw_token & ACTIVE_BIT(ehci))) {
token = hc32_to_cpu(ehci, hw->hw_token);
+ hw->hw_token &= ~ACTIVE_BIT(ehci);
/* An unlink may leave an incomplete
* async transaction in the TT buffer.
struct ehci_qh *prev;
/* Add to the end of the list of QHs waiting for the next IAAD */
- qh->qh_state = QH_STATE_UNLINK;
+ qh->qh_state = QH_STATE_UNLINK_WAIT;
if (ehci->async_unlink)
ehci->async_unlink_last->unlink_next = qh;
else
/* Do only the first waiting QH (nVidia bug?) */
qh = ehci->async_unlink;
- ehci->async_iaa = qh;
- ehci->async_unlink = qh->unlink_next;
- qh->unlink_next = NULL;
+
+ /*
+ * Intel (?) bug: The HC can write back the overlay region
+ * even after the IAA interrupt occurs. In self-defense,
+ * always go through two IAA cycles for each QH.
+ */
+ if (qh->qh_state == QH_STATE_UNLINK_WAIT) {
+ qh->qh_state = QH_STATE_UNLINK;
+ } else {
+ ehci->async_iaa = qh;
+ ehci->async_unlink = qh->unlink_next;
+ qh->unlink_next = NULL;
+ }
/* Make sure the unlinks are all visible to the hardware */
wmb();
}
}
+/* The root hub is suspended; unlink all the async QHs */
+static void unlink_empty_async_suspended(struct ehci_hcd *ehci)
+{
+ struct ehci_qh *qh;
+
+ while (ehci->async->qh_next.qh) {
+ qh = ehci->async->qh_next.qh;
+ WARN_ON(!list_empty(&qh->qtd_list));
+ single_unlink_async(ehci, qh);
+ }
+ start_iaa_cycle(ehci, false);
+}
+
/* makes sure the async qh will become idle */
/* caller must own ehci->lock */
memset (itd, 0, sizeof *itd);
itd->itd_dma = itd_dma;
+ itd->frame = 9999; /* an invalid value */
list_add (&itd->itd_list, &sched->td_list);
}
spin_unlock_irqrestore (&ehci->lock, flags);
memset (sitd, 0, sizeof *sitd);
sitd->sitd_dma = sitd_dma;
+ sitd->frame = 9999; /* an invalid value */
list_add (&sitd->sitd_list, &iso_sched->td_list);
}
* (a) SMP races against real IAA firing and retriggering, and
* (b) clean HC shutdown, when IAA watchdog was pending.
*/
- if (ehci->async_iaa) {
+ if (1) {
u32 cmd, status;
/* If we get here, IAA is *REALLY* late. It's barely
* is attached to (or the roothub port its ancestor hub is attached to). All we
* know is the index of that port under either the USB 2.0 or the USB 3.0
* roothub, but that doesn't give us the real index into the HW port status
- * registers. Scan through the xHCI roothub port array, looking for the Nth
- * entry of the correct port speed. Return the port number of that entry.
+ * registers. Call xhci_find_raw_port_number() to get real index.
*/
static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
struct usb_device *udev)
{
struct usb_device *top_dev;
- unsigned int num_similar_speed_ports;
- unsigned int faked_port_num;
- int i;
+ struct usb_hcd *hcd;
+
+ if (udev->speed == USB_SPEED_SUPER)
+ hcd = xhci->shared_hcd;
+ else
+ hcd = xhci->main_hcd;
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
- faked_port_num = top_dev->portnum;
- for (i = 0, num_similar_speed_ports = 0;
- i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
- u8 port_speed = xhci->port_array[i];
-
- /*
- * Skip ports that don't have known speeds, or have duplicate
- * Extended Capabilities port speed entries.
- */
- if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
- continue;
- /*
- * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and
- * 1.1 ports are under the USB 2.0 hub. If the port speed
- * matches the device speed, it's a similar speed port.
- */
- if ((port_speed == 0x03) == (udev->speed == USB_SPEED_SUPER))
- num_similar_speed_ports++;
- if (num_similar_speed_ports == faked_port_num)
- /* Roothub ports are numbered from 1 to N */
- return i+1;
- }
- return 0;
+ return xhci_find_raw_port_number(hcd, top_dev->portnum);
}
/* Setup an xHCI virtual device for a Set Address command */
.set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm,
.enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout,
.disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout,
+ .find_raw_port_number = xhci_find_raw_port_number,
};
/*-------------------------------------------------------------------------*/
max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
if ((port_id <= 0) || (port_id > max_ports)) {
xhci_warn(xhci, "Invalid port id %d\n", port_id);
- bogus_port_status = true;
- goto cleanup;
+ inc_deq(xhci, xhci->event_ring);
+ return;
}
/* Figure out which usb_hcd this port is attached to:
* is it a USB 3.0 port or a USB 2.0/1.1 port?
*/
major_revision = xhci->port_array[port_id - 1];
+
+ /* Find the right roothub. */
+ hcd = xhci_to_hcd(xhci);
+ if ((major_revision == 0x03) != (hcd->speed == HCD_USB3))
+ hcd = xhci->shared_hcd;
+
if (major_revision == 0) {
xhci_warn(xhci, "Event for port %u not in "
"Extended Capabilities, ignoring.\n",
* into the index into the ports on the correct split roothub, and the
* correct bus_state structure.
*/
- /* Find the right roothub. */
- hcd = xhci_to_hcd(xhci);
- if ((major_revision == 0x03) != (hcd->speed == HCD_USB3))
- hcd = xhci->shared_hcd;
bus_state = &xhci->bus_state[hcd_index(hcd)];
if (hcd->speed == HCD_USB3)
port_array = xhci->usb3_ports;
if (event_trb != ep_ring->dequeue &&
event_trb != td->last_trb)
td->urb->actual_length =
- td->urb->transfer_buffer_length
- - TRB_LEN(le32_to_cpu(event->transfer_len));
+ td->urb->transfer_buffer_length -
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
else
td->urb->actual_length = 0;
/* Maybe the event was for the data stage? */
td->urb->actual_length =
td->urb->transfer_buffer_length -
- TRB_LEN(le32_to_cpu(event->transfer_len));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
xhci_dbg(xhci, "Waiting for status "
"stage event\n");
return 0;
/* handle completion code */
switch (trb_comp_code) {
case COMP_SUCCESS:
- if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
+ if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
frame->status = 0;
break;
}
len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
}
len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
- TRB_LEN(le32_to_cpu(event->transfer_len));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
if (trb_comp_code != COMP_STOP_INVAL) {
frame->actual_length = len;
case COMP_SUCCESS:
/* Double check that the HW transferred everything. */
if (event_trb != td->last_trb ||
- TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
xhci_warn(xhci, "WARN Successful completion "
"on short TX\n");
if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
"%d bytes untransferred\n",
td->urb->ep->desc.bEndpointAddress,
td->urb->transfer_buffer_length,
- TRB_LEN(le32_to_cpu(event->transfer_len)));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)));
/* Fast path - was this the last TRB in the TD for this URB? */
if (event_trb == td->last_trb) {
- if (TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
+ if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
td->urb->actual_length =
td->urb->transfer_buffer_length -
- TRB_LEN(le32_to_cpu(event->transfer_len));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
if (td->urb->transfer_buffer_length <
td->urb->actual_length) {
xhci_warn(xhci, "HC gave bad length "
"of %d bytes left\n",
- TRB_LEN(le32_to_cpu(event->transfer_len)));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)));
td->urb->actual_length = 0;
if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
*status = -EREMOTEIO;
if (trb_comp_code != COMP_STOP_INVAL)
td->urb->actual_length +=
TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
- TRB_LEN(le32_to_cpu(event->transfer_len));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
}
return finish_td(xhci, td, event_trb, event, ep, status, false);
* transfer type
*/
case COMP_SUCCESS:
- if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
+ if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
break;
if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
trb_comp_code = COMP_SHORT_TX;
* TD list.
*/
if (list_empty(&ep_ring->td_list)) {
- xhci_warn(xhci, "WARN Event TRB for slot %d ep %d "
- "with no TDs queued?\n",
- TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
- ep_index);
- xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
- (le32_to_cpu(event->flags) &
- TRB_TYPE_BITMASK)>>10);
- xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
+ /*
+ * A stopped endpoint may generate an extra completion
+ * event if the device was suspended. Don't print
+ * warnings.
+ */
+ if (!(trb_comp_code == COMP_STOP ||
+ trb_comp_code == COMP_STOP_INVAL)) {
+ xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
+ TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
+ ep_index);
+ xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+ (le32_to_cpu(event->flags) &
+ TRB_TYPE_BITMASK)>>10);
+ xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
+ }
if (ep->skip) {
ep->skip = false;
xhci_dbg(xhci, "td_list is empty while skip "
* generate interrupts. Don't even try to enable MSI.
*/
if (xhci->quirks & XHCI_BROKEN_MSI)
- return 0;
+ goto legacy_irq;
/* unregister the legacy interrupt */
if (hcd->irq)
return -EINVAL;
}
+ legacy_irq:
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
return 0;
}
+/*
+ * Transfer the port index into real index in the HW port status
+ * registers. Caculate offset between the port's PORTSC register
+ * and port status base. Divide the number of per port register
+ * to get the real index. The raw port number bases 1.
+ */
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ __le32 __iomem *base_addr = &xhci->op_regs->port_status_base;
+ __le32 __iomem *addr;
+ int raw_port;
+
+ if (hcd->speed != HCD_USB3)
+ addr = xhci->usb2_ports[port1 - 1];
+ else
+ addr = xhci->usb3_ports[port1 - 1];
+
+ raw_port = (addr - base_addr)/NUM_PORT_REGS + 1;
+ return raw_port;
+}
+
#ifdef CONFIG_USB_SUSPEND
/* BESL to HIRD Encoding array for USB2 LPM */
/* bits 12:31 are reserved (and should be preserved on writes). */
/* IMAN - Interrupt Management Register */
-#define IMAN_IP (1 << 1)
-#define IMAN_IE (1 << 0)
+#define IMAN_IE (1 << 1)
+#define IMAN_IP (1 << 0)
/* USBSTS - USB status - status bitmasks */
/* HC not running - set to 1 when run/stop bit is cleared. */
__le32 flags;
};
+/* Transfer event TRB length bit mask */
+/* bits 0:23 */
+#define EVENT_TRB_LEN(p) ((p) & 0xffffff)
+
/** Transfer Event bit fields **/
#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
#ifdef CONFIG_PM
int xhci_bus_suspend(struct usb_hcd *hcd);
config USB_MUSB_HDRC
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
depends on USB && USB_GADGET
- select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
- select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX)
- select TWL4030_USB if MACH_OMAP_3430SDP
- select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
- select OMAP_CONTROL_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
select USB_OTG_UTILS
help
Say Y here if your system has a dual role high speed USB
u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
int err;
- err = musb->int_usb & USB_INTR_VBUSERROR;
+ err = musb->int_usb & MUSB_INTR_VBUSERROR;
if (err) {
/*
* The Mentor core doesn't debounce VBUS as needed
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_SYSFS
-
static ssize_t
musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
{
.attrs = musb_attributes,
};
-#endif /* sysfs */
-
/* Only used to provide driver mode change events */
static void musb_irq_work(struct work_struct *data)
{
if (status < 0)
goto fail4;
-#ifdef CONFIG_SYSFS
status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
if (status)
goto fail5;
-#endif
pm_runtime_put(musb->controller);
static inline void unmap_dma_buffer(struct musb_request *request,
struct musb *musb)
{
- if (!is_buffer_mapped(request))
+ struct musb_ep *musb_ep = request->ep;
+
+ if (!is_buffer_mapped(request) || !musb_ep->dma)
return;
if (request->request.dma == DMA_ADDR_INVALID) {
ep->busy = 1;
spin_unlock(&musb->lock);
- unmap_dma_buffer(req, musb);
+
+ if (!dma_mapping_error(&musb->g.dev, request->dma))
+ unmap_dma_buffer(req, musb);
+
if (request->status == 0)
dev_dbg(musb->controller, "%s done request %p, %d/%d\n",
ep->end_point.name, request,
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
-struct omap2430_glue *_glue;
+static struct omap2430_glue *_glue;
static struct timer_list musb_idle_timer;
{
struct omap2430_glue *glue = _glue;
- if (glue && glue_to_musb(glue)) {
- glue->status = status;
- } else {
+ if (!glue) {
+ pr_err("%s: musb core is not yet initialized\n", __func__);
+ return;
+ }
+ glue->status = status;
+
+ if (!glue_to_musb(glue)) {
pr_err("%s: musb core is not yet ready\n", __func__);
return;
}
spin_lock_irqsave(&phy_lock, flags);
phy = __usb_find_phy(&phy_list, type);
- if (IS_ERR(phy)) {
+ if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
pr_err("unable to find transceiver of type %s\n",
usb_phy_type_string(type));
goto err0;
spin_lock_irqsave(&phy_lock, flags);
phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
- if (IS_ERR(phy)) {
+ if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
pr_err("unable to find transceiver\n");
goto err0;
}
*/
void usb_put_phy(struct usb_phy *x)
{
- if (x)
+ if (x) {
+ struct module *owner = x->dev->driver->owner;
+
put_device(x->dev);
+ module_put(owner);
+ }
}
EXPORT_SYMBOL(usb_put_phy);
tristate "NXP ISP1301 USB transceiver support"
depends on USB || USB_GADGET
depends on I2C
+ select USB_OTG_UTILS
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
This chip is typically used as USB transceiver for USB host, gadget
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"control_dev_conf");
- control_usb->dev_conf = devm_request_and_ioremap(&pdev->dev, res);
- if (!control_usb->dev_conf) {
- dev_err(&pdev->dev, "Failed to obtain io memory\n");
- return -EADDRNOTAVAIL;
- }
+ control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(control_usb->dev_conf))
+ return PTR_ERR(control_usb->dev_conf);
if (control_usb->type == OMAP_CTRL_DEV_TYPE1) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"otghs_control");
- control_usb->otghs_control = devm_request_and_ioremap(
+ control_usb->otghs_control = devm_ioremap_resource(
&pdev->dev, res);
- if (!control_usb->otghs_control) {
- dev_err(&pdev->dev, "Failed to obtain io memory\n");
- return -EADDRNOTAVAIL;
- }
+ if (IS_ERR(control_usb->otghs_control))
+ return PTR_ERR(control_usb->otghs_control);
}
if (control_usb->type == OMAP_CTRL_DEV_TYPE2) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"phy_power_usb");
- control_usb->phy_power = devm_request_and_ioremap(
+ control_usb->phy_power = devm_ioremap_resource(
&pdev->dev, res);
- if (!control_usb->phy_power) {
- dev_dbg(&pdev->dev, "Failed to obtain io memory\n");
- return -EADDRNOTAVAIL;
- }
+ if (IS_ERR(control_usb->phy_power))
+ return PTR_ERR(control_usb->phy_power);
control_usb->sys_clk = devm_clk_get(control_usb->dev,
"sys_clkin");
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl");
- phy->pll_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
- if (!phy->pll_ctrl_base) {
- dev_err(&pdev->dev, "ioremap of pll_ctrl failed\n");
- return -ENOMEM;
- }
+ phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(phy->pll_ctrl_base))
+ return PTR_ERR(phy->pll_ctrl_base);
phy->dev = &pdev->dev;
return -ENODEV;
}
- phy_base = devm_request_and_ioremap(dev, phy_mem);
- if (!phy_base) {
- dev_err(dev, "%s: register mapping failed\n", __func__);
- return -ENXIO;
- }
+ phy_base = devm_ioremap_resource(dev, phy_mem);
+ if (IS_ERR(phy_base))
+ return PTR_ERR(phy_base);
sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
if (!sphy)
}
struct ark3116_private {
- wait_queue_head_t delta_msr_wait;
struct async_icount icount;
int irda; /* 1 for irda device */
if (!priv)
return -ENOMEM;
- init_waitqueue_head(&priv->delta_msr_wait);
mutex_init(&priv->hw_lock);
spin_lock_init(&priv->status_lock);
case TIOCMIWAIT:
for (;;) {
struct async_icount prev = priv->icount;
- interruptible_sleep_on(&priv->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
if ((prev.rng == priv->icount.rng) &&
(prev.dsr == priv->icount.dsr) &&
(prev.dcd == priv->icount.dcd) &&
priv->icount.dcd++;
if (msr & UART_MSR_TERI)
priv->icount.rng++;
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
}
}
struct ch341_private {
spinlock_t lock; /* access lock */
- wait_queue_head_t delta_msr_wait; /* wait queue for modem status */
unsigned baud_rate; /* set baud rate */
u8 line_control; /* set line control value RTS/DTR */
u8 line_status; /* active status of modem control inputs */
return -ENOMEM;
spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->delta_msr_wait);
priv->baud_rate = DEFAULT_BAUD_RATE;
priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
spin_unlock_irqrestore(&priv->lock, flags);
ch341_set_handshake(port->serial->dev, priv->line_control);
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
}
static void ch341_close(struct usb_serial_port *port)
tty_kref_put(tty);
}
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
}
exit:
spin_unlock_irqrestore(&priv->lock, flags);
while (!multi_change) {
- interruptible_sleep_on(&priv->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->lock, flags);
status = priv->line_status;
multi_change = priv->multi_status_change;
{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+ { USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+ { USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
+ { USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
+ { USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
+ { USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
+ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
int baud_rate; /* stores current baud rate in
integer form */
int isthrottled; /* if throttled, discard reads */
- wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
char prev_status, diff_status; /* used for TIOCMIWAIT */
/* we pass a pointer to this as the argument sent to
cypress_set_termios old_termios */
kfree(priv);
return -ENOMEM;
}
- init_waitqueue_head(&priv->delta_msr_wait);
usb_reset_configuration(serial->dev);
switch (cmd) {
/* This code comes from drivers/char/serial.c and ftdi_sio.c */
case TIOCMIWAIT:
- while (priv != NULL) {
- interruptible_sleep_on(&priv->delta_msr_wait);
+ for (;;) {
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
- else {
+
+ if (port->serial->disconnected)
+ return -EIO;
+
+ {
char diff = priv->diff_status;
if (diff == 0)
return -EIO; /* no change => error */
if (priv->current_status != priv->prev_status) {
priv->diff_status |= priv->current_status ^
priv->prev_status;
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
priv->prev_status = priv->current_status;
}
spin_unlock_irqrestore(&priv->lock, flags);
struct f81232_private {
spinlock_t lock;
- wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
};
line_status = priv->line_status;
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
if (!urb->actual_length)
return;
spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
- interruptible_sleep_on(&priv->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->lock, flags);
status = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
return -ENOMEM;
spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->delta_msr_wait);
usb_set_serial_port_data(port, priv);
int flags; /* some ASYNC_xxxx flags are supported */
unsigned long last_dtr_rts; /* saved modem control outputs */
struct async_icount icount;
- wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
char prev_status; /* Used for TIOCMIWAIT */
- bool dev_gone; /* Used to abort TIOCMIWAIT */
char transmit_empty; /* If transmitter is empty or not */
__u16 interface; /* FT2232C, FT2232H or FT4232H port interface
(0 for FT232/245) */
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
{ USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
+ { USB_DEVICE(MITSUBISHI_VID, MITSUBISHI_FXUSB_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
kref_init(&priv->kref);
mutex_init(&priv->cfg_lock);
- init_waitqueue_head(&priv->delta_msr_wait);
priv->flags = ASYNC_LOW_LATENCY;
- priv->dev_gone = false;
if (quirk && quirk->port_probe)
quirk->port_probe(priv);
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- priv->dev_gone = true;
- wake_up_interruptible_all(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
remove_sysfs_attrs(port);
if (diff_status & FTDI_RS0_RLSD)
priv->icount.dcd++;
- wake_up_interruptible_all(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
priv->prev_status = status;
}
*/
case TIOCMIWAIT:
cprev = priv->icount;
- while (!priv->dev_gone) {
- interruptible_sleep_on(&priv->delta_msr_wait);
+ for (;;) {
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
cnow = priv->icount;
if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
}
cprev = cnow;
}
- return -EIO;
- break;
case TIOCSERGETLSR:
return get_lsr_info(port, (struct serial_struct __user *)arg);
break;
#define CONTEC_VID 0x06CE /* Vendor ID */
#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
+/*
+ * Mitsubishi Electric Corp. (http://www.meau.com)
+ * Submitted by Konstantin Holoborodko
+ */
+#define MITSUBISHI_VID 0x06D3
+#define MITSUBISHI_FXUSB_PID 0x0284 /* USB/RS422 converters: FX-USB-AW/-BD */
+
/*
* Definitions for B&B Electronics products.
*/
if (!serial)
return;
- mutex_lock(&port->serial->disc_mutex);
-
- if (!port->serial->disconnected)
- garmin_clear(garmin_data_p);
+ garmin_clear(garmin_data_p);
/* shutdown our urbs */
usb_kill_urb(port->read_urb);
/* keep reset state so we know that we must start a new session */
if (garmin_data_p->state != STATE_RESET)
garmin_data_p->state = STATE_DISCONNECTED;
-
- mutex_unlock(&port->serial->disc_mutex);
}
wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */
wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */
- wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
struct async_icount icount;
struct usb_serial_port *port; /* loop back to the owner of this object */
/* initialize our wait queues */
init_waitqueue_head(&edge_port->wait_open);
init_waitqueue_head(&edge_port->wait_chase);
- init_waitqueue_head(&edge_port->delta_msr_wait);
init_waitqueue_head(&edge_port->wait_command);
/* initialize our icount structure */
dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number);
cprev = edge_port->icount;
while (1) {
- prepare_to_wait(&edge_port->delta_msr_wait,
+ prepare_to_wait(&port->delta_msr_wait,
&wait, TASK_INTERRUPTIBLE);
schedule();
- finish_wait(&edge_port->delta_msr_wait, &wait);
+ finish_wait(&port->delta_msr_wait, &wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
cnow = edge_port->icount;
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
icount->dcd++;
if (newMsr & EDGEPORT_MSR_DELTA_RI)
icount->rng++;
- wake_up_interruptible(&edge_port->delta_msr_wait);
+ wake_up_interruptible(&edge_port->port->delta_msr_wait);
}
/* Save the new modem status */
int close_pending;
int lsr_event;
struct async_icount icount;
- wait_queue_head_t delta_msr_wait; /* for handling sleeping while
- waiting for msr change to
- happen */
struct edgeport_serial *edge_serial;
struct usb_serial_port *port;
__u8 bUartMode; /* Port type, 0: RS232, etc. */
icount->dcd++;
if (msr & EDGEPORT_MSR_DELTA_RI)
icount->rng++;
- wake_up_interruptible(&edge_port->delta_msr_wait);
+ wake_up_interruptible(&edge_port->port->delta_msr_wait);
}
/* Save the new modem status */
dev = port->serial->dev;
memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
- init_waitqueue_head(&edge_port->delta_msr_wait);
/* turn off loopback */
status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0);
dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__);
cprev = edge_port->icount;
while (1) {
- interruptible_sleep_on(&edge_port->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
cnow = edge_port->icount;
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
+ .get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
unsigned char last_msr; /* Modem Status Register */
unsigned int rx_flags; /* Throttling flags */
struct async_icount icount;
- wait_queue_head_t msr_wait; /* for handling sleeping while waiting
- for msr change to happen */
};
#define THROTTLED 0x01
return -ENOMEM;
spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->msr_wait);
usb_set_serial_port_data(port, priv);
tty_kref_put(tty);
}
#endif
- wake_up_interruptible(&priv->msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
spin_unlock_irqrestore(&priv->lock, flags);
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
cprev = mct_u232_port->icount;
spin_unlock_irqrestore(&mct_u232_port->lock, flags);
for ( ; ; ) {
- prepare_to_wait(&mct_u232_port->msr_wait,
+ prepare_to_wait(&port->delta_msr_wait,
&wait, TASK_INTERRUPTIBLE);
schedule();
- finish_wait(&mct_u232_port->msr_wait, &wait);
+ finish_wait(&port->delta_msr_wait, &wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&mct_u232_port->lock, flags);
cnow = mct_u232_port->icount;
spin_unlock_irqrestore(&mct_u232_port->lock, flags);
char open;
char open_ports;
wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
- wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
int delta_msr_cond;
struct async_icount icount;
struct usb_serial_port *port; /* loop back to the owner of this object */
icount->rng++;
smp_wmb();
}
+
+ mos7840_port->delta_msr_cond = 1;
+ wake_up_interruptible(&port->port->delta_msr_wait);
}
}
/* initialize our wait queues */
init_waitqueue_head(&mos7840_port->wait_chase);
- init_waitqueue_head(&mos7840_port->delta_msr_wait);
/* initialize our icount structure */
memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount));
mos7840_port->read_urb_busy = false;
}
}
- wake_up(&mos7840_port->delta_msr_wait);
- mos7840_port->delta_msr_cond = 1;
dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__,
mos7840_port->shadowLCR);
}
while (1) {
/* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */
mos7840_port->delta_msr_cond = 0;
- wait_event_interruptible(mos7840_port->delta_msr_wait,
- (mos7840_port->
+ wait_event_interruptible(port->delta_msr_wait,
+ (port->serial->disconnected ||
+ mos7840_port->
delta_msr_cond == 1));
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
cnow = mos7840_port->icount;
smp_rmb();
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
#define CINTERION_PRODUCT_EU3_E 0x0051
#define CINTERION_PRODUCT_EU3_P 0x0052
#define CINTERION_PRODUCT_PH8 0x0053
+#define CINTERION_PRODUCT_AH6 0x0055
+#define CINTERION_PRODUCT_PLS8 0x0060
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
u8 setup_done;
struct delayed_work delayed_setup_work;
- wait_queue_head_t intr_wait;
struct usb_serial_port *port; /* USB port with which associated */
};
return -ENOMEM;
spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->intr_wait);
priv->port = port;
INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
- wait_event_interruptible(priv->intr_wait,
+ wait_event_interruptible(port->delta_msr_wait,
+ port->serial->disconnected ||
priv->status.pin_state != prev);
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->lock, flags);
status = priv->status.pin_state & PIN_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
if (!priv->transient) {
if (xs->pin_state != priv->status.pin_state)
- wake_up_interruptible(&priv->intr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE);
}
struct pl2303_private {
spinlock_t lock;
- wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
};
return -ENOMEM;
spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->delta_msr_wait);
usb_set_serial_port_data(port, priv);
spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
- interruptible_sleep_on(&priv->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->lock, flags);
status = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
spin_unlock_irqrestore(&priv->lock, flags);
if (priv->line_status & UART_BREAK_ERROR)
usb_serial_handle_break(port);
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
tty = tty_port_tty_get(&port->port);
if (!tty)
line_status = priv->line_status;
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
if (!urb->actual_length)
return;
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) }, /* NMEA */
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) }, /* WMC */
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) }, /* DIAG */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1fac, 0x0151, 0xff, 0xff, 0xff) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
if (is_gobi1k) {
/* Gobi 1K USB layout:
- * 0: serial port (doesn't respond)
+ * 0: DM/DIAG (use libqcdm from ModemManager for communication)
* 1: serial port (doesn't respond)
* 2: AT-capable modem port
* 3: QMI/net
*/
- if (ifnum == 2)
+ if (ifnum == 0) {
+ dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
+ altsetting = 1;
+ } else if (ifnum == 2)
dev_dbg(dev, "Modem port found\n");
else
altsetting = -1;
u8 shadowLSR;
u8 shadowMSR;
- wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
struct async_icount icount;
struct usb_serial_port *port;
spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
- wait_event_interruptible(priv->delta_msr_wait,
- ((priv->icount.rng != prev.rng) ||
+ wait_event_interruptible(port->delta_msr_wait,
+ (port->serial->disconnected ||
+ (priv->icount.rng != prev.rng) ||
(priv->icount.dsr != prev.dsr) ||
(priv->icount.dcd != prev.dcd) ||
(priv->icount.cts != prev.cts)));
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->lock, flags);
cur = priv->icount;
spin_unlock_irqrestore(&priv->lock, flags);
__func__);
break;
}
- tty_flip_buffer_push(&port->port);
+
+ if (port_priv->is_open)
+ tty_flip_buffer_push(&port->port);
newport = *(ch + 3);
tty_insert_flip_string(&port->port, ch, 1);
}
- tty_flip_buffer_push(&port->port);
+ if (port_priv->is_open)
+ tty_flip_buffer_push(&port->port);
}
static void qt2_write_bulk_callback(struct urb *urb)
spin_lock_init(&port_priv->lock);
spin_lock_init(&port_priv->urb_lock);
- init_waitqueue_head(&port_priv->delta_msr_wait);
port_priv->port = port;
port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
if (newMSR & UART_MSR_TERI)
port_priv->icount.rng++;
- wake_up_interruptible(&port_priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
}
}
struct spcp8x5_private {
spinlock_t lock;
enum spcp8x5_type type;
- wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
};
return -ENOMEM;
spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->delta_msr_wait);
priv->type = type;
usb_set_serial_port_data(port , priv);
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
/* wake up the wait for termios */
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
if (!urb->actual_length)
return;
while (1) {
/* wake up in bulk read */
- interruptible_sleep_on(&priv->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->lock, flags);
status = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
spinlock_t status_lock;
u8 shadowLSR;
u8 shadowMSR;
- wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
struct async_icount icount;
};
spin_unlock_irqrestore(&priv->status_lock, flags);
while (1) {
- wait_event_interruptible(priv->delta_msr_wait,
- ((priv->icount.rng != prev.rng) ||
+ wait_event_interruptible(port->delta_msr_wait,
+ (port->serial->disconnected ||
+ (priv->icount.rng != prev.rng) ||
(priv->icount.dsr != prev.dsr) ||
(priv->icount.dcd != prev.dcd) ||
(priv->icount.cts != prev.cts)));
if (signal_pending(current))
return -ERESTARTSYS;
+ if (port->serial->disconnected)
+ return -EIO;
+
spin_lock_irqsave(&priv->status_lock, flags);
cur = priv->icount;
spin_unlock_irqrestore(&priv->status_lock, flags);
return -ENOMEM;
spin_lock_init(&priv->status_lock);
- init_waitqueue_head(&priv->delta_msr_wait);
usb_set_serial_port_data(port, priv);
priv->icount.dcd++;
if (msr & UART_MSR_TERI)
priv->icount.rng++;
- wake_up_interruptible(&priv->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
}
}
int tp_flags;
int tp_closing_wait;/* in .01 secs */
struct async_icount tp_icount;
- wait_queue_head_t tp_msr_wait; /* wait for msr change */
wait_queue_head_t tp_write_wait;
struct ti_device *tp_tdev;
struct usb_serial_port *tp_port;
else
tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
tport->tp_closing_wait = closing_wait;
- init_waitqueue_head(&tport->tp_msr_wait);
init_waitqueue_head(&tport->tp_write_wait);
if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) {
kfree(tport);
dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__);
cprev = tport->tp_icount;
while (1) {
- interruptible_sleep_on(&tport->tp_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
cnow = tport->tp_icount;
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
icount->dcd++;
if (msr & TI_MSR_DELTA_RI)
icount->rng++;
- wake_up_interruptible(&tport->tp_msr_wait);
+ wake_up_interruptible(&tport->tp_port->delta_msr_wait);
spin_unlock_irqrestore(&tport->tp_lock, flags);
}
}
}
+ usb_put_intf(serial->interface);
usb_put_dev(serial->dev);
kfree(serial);
}
}
serial->dev = usb_get_dev(dev);
serial->type = driver;
- serial->interface = interface;
+ serial->interface = usb_get_intf(interface);
kref_init(&serial->kref);
mutex_init(&serial->disc_mutex);
serial->minor = SERIAL_TTY_NO_MINOR;
port->port.ops = &serial_port_ops;
port->serial = serial;
spin_lock_init(&port->lock);
+ init_waitqueue_head(&port->delta_msr_wait);
/* Keep this for private driver use for the moment but
should probably go away */
INIT_WORK(&port->work, usb_serial_port_work);
return 0;
}
-/* This places the HUAWEI usb dongles in multi-port mode */
-static int usb_stor_huawei_feature_init(struct us_data *us)
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
{
int result;
US_DEBUGP("Huawei mode set result is %d\n", result);
return 0;
}
-
-/*
- * It will send a scsi switch command called rewind' to huawei dongle.
- * When the dongle receives this command at the first time,
- * it will reboot immediately. After rebooted, it will ignore this command.
- * So it is unnecessary to read its response.
- */
-static int usb_stor_huawei_scsi_init(struct us_data *us)
-{
- int result = 0;
- int act_len = 0;
- struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
- char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
- 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
- bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
- bcbw->Tag = 0;
- bcbw->DataTransferLength = 0;
- bcbw->Flags = bcbw->Lun = 0;
- bcbw->Length = sizeof(rewind_cmd);
- memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
- memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
-
- result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
- US_BULK_CB_WRAP_LEN, &act_len);
- US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
- return result;
-}
-
-/*
- * It tries to find the supported Huawei USB dongles.
- * In Huawei, they assign the following product IDs
- * for all of their mobile broadband dongles,
- * including the new dongles in the future.
- * So if the product ID is not included in this list,
- * it means it is not Huawei's mobile broadband dongles.
- */
-static int usb_stor_huawei_dongles_pid(struct us_data *us)
-{
- struct usb_interface_descriptor *idesc;
- int idProduct;
-
- idesc = &us->pusb_intf->cur_altsetting->desc;
- idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
- /* The first port is CDROM,
- * means the dongle in the single port mode,
- * and a switch command is required to be sent. */
- if (idesc && idesc->bInterfaceNumber == 0) {
- if ((idProduct == 0x1001)
- || (idProduct == 0x1003)
- || (idProduct == 0x1004)
- || (idProduct >= 0x1401 && idProduct <= 0x1500)
- || (idProduct >= 0x1505 && idProduct <= 0x1600)
- || (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
- return 1;
- }
- }
- return 0;
-}
-
-int usb_stor_huawei_init(struct us_data *us)
-{
- int result = 0;
-
- if (usb_stor_huawei_dongles_pid(us)) {
- if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
- result = usb_stor_huawei_scsi_init(us);
- else
- result = usb_stor_huawei_feature_init(us);
- }
- return result;
-}
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
-/* This places the HUAWEI usb dongles in multi-port mode */
-int usb_stor_huawei_init(struct us_data *us);
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
* as opposed to devices that do something strangely or wrongly.
*/
+/* In-kernel mode switching is deprecated. Do not add new devices to
+ * this list for the sole purpose of switching them to a different
+ * mode. Existing userspace solutions are superior.
+ *
+ * New mode switching devices should instead be added to the database
+ * maintained at http://www.draisberghof.de/usb_modeswitch/
+ */
+
#if !defined(CONFIG_USB_STORAGE_SDDR09) && \
!defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
#define NO_SDDR09
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG),
+/* Added by Dmitry Artamonow <mad_soft@inbox.ru> */
+UNUSUAL_DEV( 0x04e8, 0x5136, 0x0000, 0x9999,
+ "Samsung",
+ "YP-Z3",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64),
+
/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
* Device uses standards-violating 32-byte Bulk Command Block Wrappers and
* reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
/* Reported by fangxiaozhi <huananhu@huawei.com>
* This brings the HUAWEI data card devices into multi-port mode
*/
-UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
+UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
#include <linux/pci.h>
#include <linux/uaccess.h>
#include <linux/vfio.h>
+#include <linux/slab.h>
#include "vfio_pci_private.h"
#include <linux/vfio.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
#include "vfio_pci_private.h"
msg.msg_controllen = 0;
ubufs = NULL;
} else {
- struct ubuf_info *ubuf = &vq->ubuf_info[head];
+ struct ubuf_info *ubuf;
+ ubuf = vq->ubuf_info + vq->upend_idx;
vq->heads[vq->upend_idx].len =
VHOST_DMA_IN_PROGRESS;
VHOST_SCSI_VQ_IO = 2,
};
+/*
+ * VIRTIO_RING_F_EVENT_IDX seems broken. Not sure the bug is in
+ * kernel but disabling it helps.
+ * TODO: debug and remove the workaround.
+ */
+enum {
+ VHOST_SCSI_FEATURES = VHOST_FEATURES & (~VIRTIO_RING_F_EVENT_IDX)
+};
+
#define VHOST_SCSI_MAX_TARGET 256
#define VHOST_SCSI_MAX_VQ 128
for (index = 0; index < vs->dev.nvqs; ++index) {
if (!vhost_vq_access_ok(&vs->vqs[index])) {
ret = -EFAULT;
- goto err;
+ goto err_dev;
}
}
for (i = 0; i < VHOST_SCSI_MAX_TARGET; i++) {
if (!tv_tpg)
continue;
+ mutex_lock(&tv_tpg->tv_tpg_mutex);
tv_tport = tv_tpg->tport;
if (!tv_tport) {
ret = -ENODEV;
- goto err;
+ goto err_tpg;
}
if (strcmp(tv_tport->tport_name, t->vhost_wwpn)) {
tv_tport->tport_name, tv_tpg->tport_tpgt,
t->vhost_wwpn, t->vhost_tpgt);
ret = -EINVAL;
- goto err;
+ goto err_tpg;
}
tv_tpg->tv_tpg_vhost_count--;
vs->vs_tpg[target] = NULL;
vs->vs_endpoint = false;
+ mutex_unlock(&tv_tpg->tv_tpg_mutex);
}
mutex_unlock(&vs->dev.mutex);
return 0;
-err:
+err_tpg:
+ mutex_unlock(&tv_tpg->tv_tpg_mutex);
+err_dev:
mutex_unlock(&vs->dev.mutex);
return ret;
}
for (i = 0; i < VHOST_SCSI_MAX_VQ; i++)
vhost_scsi_flush_vq(vs, i);
+ vhost_work_flush(&vs->dev, &vs->vs_completion_work);
}
static int vhost_scsi_set_features(struct vhost_scsi *vs, u64 features)
{
- if (features & ~VHOST_FEATURES)
+ if (features & ~VHOST_SCSI_FEATURES)
return -EOPNOTSUPP;
mutex_lock(&vs->dev.mutex);
return -EFAULT;
return 0;
case VHOST_GET_FEATURES:
- features = VHOST_FEATURES;
+ features = VHOST_SCSI_FEATURES;
if (copy_to_user(featurep, &features, sizeof features))
return -EFAULT;
return 0;
#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */
#define ATMEL_LCDC_FIFO_SIZE 512 /* words */
+struct atmel_lcdfb_config {
+ bool have_alt_pixclock;
+ bool have_hozval;
+ bool have_intensity_bit;
+};
+
+static struct atmel_lcdfb_config at91sam9261_config = {
+ .have_hozval = true,
+ .have_intensity_bit = true,
+};
+
+static struct atmel_lcdfb_config at91sam9263_config = {
+ .have_intensity_bit = true,
+};
+
+static struct atmel_lcdfb_config at91sam9g10_config = {
+ .have_hozval = true,
+};
+
+static struct atmel_lcdfb_config at91sam9g45_config = {
+ .have_alt_pixclock = true,
+};
+
+static struct atmel_lcdfb_config at91sam9g45es_config = {
+};
+
+static struct atmel_lcdfb_config at91sam9rl_config = {
+ .have_intensity_bit = true,
+};
+
+static struct atmel_lcdfb_config at32ap_config = {
+ .have_hozval = true,
+};
+
+static const struct platform_device_id atmel_lcdfb_devtypes[] = {
+ {
+ .name = "at91sam9261-lcdfb",
+ .driver_data = (unsigned long)&at91sam9261_config,
+ }, {
+ .name = "at91sam9263-lcdfb",
+ .driver_data = (unsigned long)&at91sam9263_config,
+ }, {
+ .name = "at91sam9g10-lcdfb",
+ .driver_data = (unsigned long)&at91sam9g10_config,
+ }, {
+ .name = "at91sam9g45-lcdfb",
+ .driver_data = (unsigned long)&at91sam9g45_config,
+ }, {
+ .name = "at91sam9g45es-lcdfb",
+ .driver_data = (unsigned long)&at91sam9g45es_config,
+ }, {
+ .name = "at91sam9rl-lcdfb",
+ .driver_data = (unsigned long)&at91sam9rl_config,
+ }, {
+ .name = "at32ap-lcdfb",
+ .driver_data = (unsigned long)&at32ap_config,
+ }, {
+ /* terminator */
+ }
+};
+
+static struct atmel_lcdfb_config *
+atmel_lcdfb_get_config(struct platform_device *pdev)
+{
+ unsigned long data;
+
+ data = platform_get_device_id(pdev)->driver_data;
+
+ return (struct atmel_lcdfb_config *)data;
+}
+
#if defined(CONFIG_ARCH_AT91)
#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
| FBINFO_PARTIAL_PAN_OK \
.accel = FB_ACCEL_NONE,
};
-static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
+static unsigned long compute_hozval(struct atmel_lcdfb_info *sinfo,
+ unsigned long xres)
{
+ unsigned long lcdcon2;
unsigned long value;
- if (!(cpu_is_at91sam9261() || cpu_is_at91sam9g10()
- || cpu_is_at32ap7000()))
+ if (!sinfo->config->have_hozval)
return xres;
+ lcdcon2 = lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2);
value = xres;
if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
/* STN display */
= var->bits_per_pixel;
break;
case 16:
+ /* Older SOCs use IBGR:555 rather than BGR:565. */
+ if (sinfo->config->have_intensity_bit)
+ var->green.length = 5;
+ else
+ var->green.length = 6;
+
if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
- /* RGB:565 mode */
- var->red.offset = 11;
+ /* RGB:5X5 mode */
+ var->red.offset = var->green.length + 5;
var->blue.offset = 0;
} else {
- /* BGR:565 mode */
+ /* BGR:5X5 mode */
var->red.offset = 0;
- var->blue.offset = 11;
+ var->blue.offset = var->green.length + 5;
}
var->green.offset = 5;
- var->green.length = 6;
var->red.length = var->blue.length = 5;
break;
case 32:
/* Now, the LCDC core... */
/* Set pixel clock */
- if (cpu_is_at91sam9g45() && !cpu_is_at91sam9g45es())
+ if (sinfo->config->have_alt_pixclock)
pix_factor = 1;
clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
/* Horizontal value (aka line size) */
- hozval_linesz = compute_hozval(info->var.xres,
- lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
+ hozval_linesz = compute_hozval(sinfo, info->var.xres);
/* Display size */
value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
case FB_VISUAL_PSEUDOCOLOR:
if (regno < 256) {
- if (cpu_is_at91sam9261() || cpu_is_at91sam9263()
- || cpu_is_at91sam9rl()) {
+ if (sinfo->config->have_intensity_bit) {
/* old style I+BGR:555 */
val = ((red >> 11) & 0x001f);
val |= ((green >> 6) & 0x03e0);
static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
{
- if (sinfo->bus_clk)
- clk_enable(sinfo->bus_clk);
+ clk_enable(sinfo->bus_clk);
clk_enable(sinfo->lcdc_clk);
}
static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
{
- if (sinfo->bus_clk)
- clk_disable(sinfo->bus_clk);
+ clk_disable(sinfo->bus_clk);
clk_disable(sinfo->lcdc_clk);
}
}
sinfo->info = info;
sinfo->pdev = pdev;
+ sinfo->config = atmel_lcdfb_get_config(pdev);
+ if (!sinfo->config)
+ goto free_info;
strcpy(info->fix.id, sinfo->pdev->name);
info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
info->fix = atmel_lcdfb_fix;
/* Enable LCDC Clocks */
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()
- || cpu_is_at32ap7000()) {
- sinfo->bus_clk = clk_get(dev, "hck1");
- if (IS_ERR(sinfo->bus_clk)) {
- ret = PTR_ERR(sinfo->bus_clk);
- goto free_info;
- }
+ sinfo->bus_clk = clk_get(dev, "hclk");
+ if (IS_ERR(sinfo->bus_clk)) {
+ ret = PTR_ERR(sinfo->bus_clk);
+ goto free_info;
}
sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
if (IS_ERR(sinfo->lcdc_clk)) {
atmel_lcdfb_stop_clock(sinfo);
clk_put(sinfo->lcdc_clk);
put_bus_clk:
- if (sinfo->bus_clk)
- clk_put(sinfo->bus_clk);
+ clk_put(sinfo->bus_clk);
free_info:
framebuffer_release(info);
out:
unregister_framebuffer(info);
atmel_lcdfb_stop_clock(sinfo);
clk_put(sinfo->lcdc_clk);
- if (sinfo->bus_clk)
- clk_put(sinfo->bus_clk);
+ clk_put(sinfo->bus_clk);
fb_dealloc_cmap(&info->cmap);
free_irq(sinfo->irq_base, info);
iounmap(sinfo->mmio);
.remove = __exit_p(atmel_lcdfb_remove),
.suspend = atmel_lcdfb_suspend,
.resume = atmel_lcdfb_resume,
-
+ .id_table = atmel_lcdfb_devtypes,
.driver = {
.name = "atmel_lcdfb",
.owner = THIS_MODULE,
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/fb.h>
+#include <linux/io.h>
#include <linux/platform_data/video-ep93xx.h>
fbmode->vmode = 0;
if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
- if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+ if (vm->dmt_flags & VESA_DMT_VSYNC_HIGH)
fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
fbmode->vmode |= FB_VMODE_INTERLACED;
unsigned dotclk_delay;
const struct mxsfb_devdata *devdata;
int mapped;
+ u32 sync;
};
#define mxsfb_is_v3(host) (host->devdata->ipversion == 3)
vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT)
vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
- if (fb_info->var.sync & FB_SYNC_DATA_ENABLE_HIGH_ACT)
+ if (host->sync & MXSFB_SYNC_DATA_ENABLE_HIGH_ACT)
vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
- if (fb_info->var.sync & FB_SYNC_DOTCLK_FAILING_ACT)
+ if (host->sync & MXSFB_SYNC_DOTCLK_FAILING_ACT)
vdctrl0 |= VDCTRL0_DOTCLK_ACT_FAILING;
writel(vdctrl0, host->base + LCDC_VDCTRL0);
INIT_LIST_HEAD(&fb_info->modelist);
+ host->sync = pdata->sync;
+
ret = mxsfb_init_fbinfo(host);
if (ret != 0)
goto error_init_fb;
#include <linux/lcd.h>
#include <linux/gpio.h>
+#include <mach/hardware.h>
#include <mach/board-ams-delta.h>
#include "omapfb.h"
#include <linux/platform_device.h>
#include <asm/gpio.h>
+
+#include <mach/hardware.h>
#include <mach/mux.h>
+
#include "omapfb.h"
static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
#include <linux/omap-dma.h>
+#include <mach/hardware.h>
+
#include "omapfb.h"
#include "lcdc.h"
u32 power_on_resume:1;
};
+/* used to pass spi_device from SPI to DSS portion of the driver */
+static struct tpo_td043_device *g_tpo_td043;
+
static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
{
struct spi_message m;
static int tpo_td043_probe(struct omap_dss_device *dssdev)
{
- struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+ struct tpo_td043_device *tpo_td043 = g_tpo_td043;
int nreset_gpio = dssdev->reset_gpio;
int ret = 0;
if (ret)
dev_warn(&dssdev->dev, "failed to create sysfs files\n");
+ dev_set_drvdata(&dssdev->dev, tpo_td043);
+
return 0;
fail_gpio_req:
return -ENODEV;
}
+ if (g_tpo_td043 != NULL)
+ return -EBUSY;
+
spi->bits_per_word = 16;
spi->mode = SPI_MODE_0;
tpo_td043->spi = spi;
tpo_td043->nreset_gpio = dssdev->reset_gpio;
dev_set_drvdata(&spi->dev, tpo_td043);
- dev_set_drvdata(&dssdev->dev, tpo_td043);
+ g_tpo_td043 = tpo_td043;
omap_dss_register_driver(&tpo_td043_driver);
omap_dss_unregister_driver(&tpo_td043_driver);
kfree(tpo_td043);
+ g_tpo_td043 = NULL;
return 0;
}
static const enum omap_dss_output_id omap4_dss_supported_outputs[] = {
/* OMAP_DSS_CHANNEL_LCD */
- OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
- OMAP_DSS_OUTPUT_DSI1,
+ OMAP_DSS_OUTPUT_DBI | OMAP_DSS_OUTPUT_DSI1,
/* OMAP_DSS_CHANNEL_DIGIT */
- OMAP_DSS_OUTPUT_VENC | OMAP_DSS_OUTPUT_HDMI |
- OMAP_DSS_OUTPUT_DPI,
+ OMAP_DSS_OUTPUT_VENC | OMAP_DSS_OUTPUT_HDMI,
/* OMAP_DSS_CHANNEL_LCD2 */
OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
tmp = ((mode->xres & 7) << 24) | ((display_h_total & 7) << 16)
| ((mode->hsync_len & 7) << 8) | (hsync_pos & 7);
lcdc_write_chan(ch, LDHAJR, tmp);
+ lcdc_write_chan_mirror(ch, LDHAJR, tmp);
}
static void sh_mobile_lcdc_overlay_setup(struct sh_mobile_lcdc_overlay *ovl)
err = -ENOMEM;
if (err) {
- platform_device_put(uvesafb_device);
+ if (uvesafb_device)
+ platform_device_put(uvesafb_device);
platform_driver_unregister(&uvesafb_driver);
cn_del_callback(&uvesafb_cn_id);
return err;
return gpio_get_value(pdata->pin) ? 1 : 0;
}
+#if defined(CONFIG_OF)
static struct of_device_id w1_gpio_dt_ids[] = {
{ .compatible = "w1-gpio" },
{}
};
MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids);
+#endif
static int w1_gpio_probe_dt(struct platform_device *pdev)
{
return err;
}
-static int __exit w1_gpio_remove(struct platform_device *pdev)
+static int w1_gpio_remove(struct platform_device *pdev)
{
struct w1_bus_master *master = platform_get_drvdata(pdev);
struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
.of_match_table = of_match_ptr(w1_gpio_dt_ids),
},
.probe = w1_gpio_probe,
- .remove = __exit_p(w1_gpio_remove),
+ .remove = w1_gpio_remove,
.suspend = w1_gpio_suspend,
.resume = w1_gpio_resume,
};
tmp64 = (triplet_ret >> 2);
rn |= (tmp64 << i);
- if (kthread_should_stop()) {
+ /* ensure we're called from kthread and not by netlink callback */
+ if (!dev->priv && kthread_should_stop()) {
mutex_unlock(&dev->bus_mutex);
dev_dbg(&dev->dev, "Abort w1_search\n");
return;
#include "sp5100_tco.h"
/* Module and version information */
-#define TCO_VERSION "0.03"
+#define TCO_VERSION "0.05"
#define TCO_MODULE_NAME "SP5100 TCO timer"
#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
/* internal variables */
static u32 tcobase_phys;
-static u32 resbase_phys;
static u32 tco_wdt_fired;
static void __iomem *tcobase;
static unsigned int pm_iobase;
static unsigned long timer_alive;
static char tco_expect_close;
static struct pci_dev *sp5100_tco_pci;
-static struct resource wdt_res = {
- .name = "Watchdog Timer",
- .flags = IORESOURCE_MEM,
-};
/* the watchdog platform device */
static struct platform_device *sp5100_tco_platform_device;
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started."
" (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-static unsigned int force_addr;
-module_param(force_addr, uint, 0);
-MODULE_PARM_DESC(force_addr, "Force the use of specified MMIO address."
- " ONLY USE THIS PARAMETER IF YOU REALLY KNOW"
- " WHAT YOU ARE DOING (default=none)");
-
/*
* Some TCO specific functions
*/
}
}
-static void tco_timer_disable(void)
-{
- int val;
-
- if (sp5100_tco_pci->revision >= 0x40) {
- /* For SB800 or later */
- /* Enable watchdog decode bit and Disable watchdog timer */
- outb(SB800_PM_WATCHDOG_CONTROL, SB800_IO_PM_INDEX_REG);
- val = inb(SB800_IO_PM_DATA_REG);
- val |= SB800_PCI_WATCHDOG_DECODE_EN;
- val |= SB800_PM_WATCHDOG_DISABLE;
- outb(val, SB800_IO_PM_DATA_REG);
- } else {
- /* For SP5100 or SB7x0 */
- /* Enable watchdog decode bit */
- pci_read_config_dword(sp5100_tco_pci,
- SP5100_PCI_WATCHDOG_MISC_REG,
- &val);
-
- val |= SP5100_PCI_WATCHDOG_DECODE_EN;
-
- pci_write_config_dword(sp5100_tco_pci,
- SP5100_PCI_WATCHDOG_MISC_REG,
- val);
-
- /* Disable Watchdog timer */
- outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG);
- val = inb(SP5100_IO_PM_DATA_REG);
- val |= SP5100_PM_WATCHDOG_DISABLE;
- outb(val, SP5100_IO_PM_DATA_REG);
- }
-}
-
/*
* /dev/watchdog handling
*/
{
struct pci_dev *dev = NULL;
const char *dev_name = NULL;
- u32 val, tmp_val;
+ u32 val;
u32 index_reg, data_reg, base_addr;
/* Match the PCI device */
} else
pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val);
- /*
- * Lastly re-programming the watchdog timer MMIO address,
- * This method is a last resort...
- *
- * Before re-programming, to ensure that the watchdog timer
- * is disabled, disable the watchdog timer.
- */
- tco_timer_disable();
-
- if (force_addr) {
- /*
- * Force the use of watchdog timer MMIO address, and aligned to
- * 8byte boundary.
- */
- force_addr &= ~0x7;
- val = force_addr;
-
- pr_info("Force the use of 0x%04x as MMIO address\n", val);
- } else {
- /*
- * Get empty slot into the resource tree for watchdog timer.
- */
- if (allocate_resource(&iomem_resource,
- &wdt_res,
- SP5100_WDT_MEM_MAP_SIZE,
- 0xf0000000,
- 0xfffffff8,
- 0x8,
- NULL,
- NULL)) {
- pr_err("MMIO allocation failed\n");
- goto unreg_region;
- }
-
- val = resbase_phys = wdt_res.start;
- pr_debug("Got 0x%04x from resource tree\n", val);
- }
-
- /* Restore to the low three bits */
- outb(base_addr+0, index_reg);
- tmp_val = val | (inb(data_reg) & 0x7);
-
- /* Re-programming the watchdog timer base address */
- outb(base_addr+0, index_reg);
- outb((tmp_val >> 0) & 0xff, data_reg);
- outb(base_addr+1, index_reg);
- outb((tmp_val >> 8) & 0xff, data_reg);
- outb(base_addr+2, index_reg);
- outb((tmp_val >> 16) & 0xff, data_reg);
- outb(base_addr+3, index_reg);
- outb((tmp_val >> 24) & 0xff, data_reg);
-
- if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
- dev_name)) {
- pr_err("MMIO address 0x%04x already in use\n", val);
- goto unreg_resource;
- }
+ pr_notice("failed to find MMIO address, giving up.\n");
+ goto unreg_region;
setup_wdt:
tcobase_phys = val;
unreg_mem_region:
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
-unreg_resource:
- if (resbase_phys)
- release_resource(&wdt_res);
unreg_region:
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
exit:
static int sp5100_tco_init(struct platform_device *dev)
{
int ret;
- char addr_str[16];
/*
* Check whether or not the hardware watchdog is there. If found, then
clear_bit(0, &timer_alive);
/* Show module parameters */
- if (force_addr == tcobase_phys)
- /* The force_addr is vaild */
- sprintf(addr_str, "0x%04x", force_addr);
- else
- strcpy(addr_str, "none");
-
- pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d, "
- "force_addr=%s)\n",
- tcobase, heartbeat, nowayout, addr_str);
+ pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
+ tcobase, heartbeat, nowayout);
return 0;
exit:
iounmap(tcobase);
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
- if (resbase_phys)
- release_resource(&wdt_res);
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
return ret;
}
misc_deregister(&sp5100_tco_miscdev);
iounmap(tcobase);
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
- if (resbase_phys)
- release_resource(&wdt_res);
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
}
#define SB800_PM_WATCHDOG_DISABLE (1 << 2)
#define SB800_PM_WATCHDOG_SECOND_RES (3 << 0)
#define SB800_ACPI_MMIO_DECODE_EN (1 << 0)
-#define SB800_ACPI_MMIO_SEL (1 << 2)
+#define SB800_ACPI_MMIO_SEL (1 << 1)
#define SB800_PM_WDT_MMIO_OFFSET 0xB00
config XEN_STUB
bool "Xen stub drivers"
- depends on XEN && X86_64
+ depends on XEN && X86_64 && BROKEN
default n
help
Allow kernel to install stub drivers, to reserve space for Xen drivers,
if (unlikely((cpu != cpu_from_evtchn(port))))
do_hypercall = 1;
- else
+ else {
+ /*
+ * Need to clear the mask before checking pending to
+ * avoid a race with an event becoming pending.
+ *
+ * EVTCHNOP_unmask will only trigger an upcall if the
+ * mask bit was set, so if a hypercall is needed
+ * remask the event.
+ */
+ sync_clear_bit(port, BM(&s->evtchn_mask[0]));
evtchn_pending = sync_test_bit(port, BM(&s->evtchn_pending[0]));
- if (unlikely(evtchn_pending && xen_hvm_domain()))
- do_hypercall = 1;
+ if (unlikely(evtchn_pending && xen_hvm_domain())) {
+ sync_set_bit(port, BM(&s->evtchn_mask[0]));
+ do_hypercall = 1;
+ }
+ }
/* Slow path (hypercall) if this is a non-local port or if this is
* an hvm domain and an event is pending (hvm domains don't have
} else {
struct vcpu_info *vcpu_info = __this_cpu_read(xen_vcpu);
- sync_clear_bit(port, BM(&s->evtchn_mask[0]));
-
/*
* The following is basically the equivalent of
* 'hw_resend_irq'. Just like a real IO-APIC we 'lose
}
EXPORT_SYMBOL_GPL(xen_event_channel_op_compat);
-int HYPERVISOR_physdev_op_compat(int cmd, void *arg)
+int xen_physdev_op_compat(int cmd, void *arg)
{
struct physdev_op op;
int rc;
return rc;
}
+EXPORT_SYMBOL_GPL(xen_physdev_op_compat);
(void)acpi_processor_preregister_performance(acpi_perf_data);
for_each_possible_cpu(i) {
+ struct acpi_processor *pr;
struct acpi_processor_performance *perf;
+ pr = per_cpu(processors, i);
perf = per_cpu_ptr(acpi_perf_data, i);
- rc = acpi_processor_register_performance(perf, i);
+ if (!pr)
+ continue;
+
+ pr->performance = perf;
+ rc = acpi_processor_get_performance_info(pr);
if (rc)
goto err_out;
}
- rc = acpi_processor_notify_smm(THIS_MODULE);
- if (rc)
- goto err_unregister;
for_each_possible_cpu(i) {
struct acpi_processor *_pr;
#include <xen/events.h>
#include <asm/xen/pci.h>
#include <asm/xen/hypervisor.h>
+#include <xen/interface/physdev.h>
#include "pciback.h"
#include "conf_space.h"
#include "conf_space_quirks.h"
static void pcistub_device_release(struct kref *kref)
{
struct pcistub_device *psdev;
+ struct pci_dev *dev;
struct xen_pcibk_dev_data *dev_data;
psdev = container_of(kref, struct pcistub_device, kref);
- dev_data = pci_get_drvdata(psdev->dev);
+ dev = psdev->dev;
+ dev_data = pci_get_drvdata(dev);
- dev_dbg(&psdev->dev->dev, "pcistub_device_release\n");
+ dev_dbg(&dev->dev, "pcistub_device_release\n");
- xen_unregister_device_domain_owner(psdev->dev);
+ xen_unregister_device_domain_owner(dev);
/* Call the reset function which does not take lock as this
* is called from "unbind" which takes a device_lock mutex.
*/
- __pci_reset_function_locked(psdev->dev);
- if (pci_load_and_free_saved_state(psdev->dev,
- &dev_data->pci_saved_state)) {
- dev_dbg(&psdev->dev->dev, "Could not reload PCI state\n");
- } else
- pci_restore_state(psdev->dev);
+ __pci_reset_function_locked(dev);
+ if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state))
+ dev_dbg(&dev->dev, "Could not reload PCI state\n");
+ else
+ pci_restore_state(dev);
+
+ if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) {
+ struct physdev_pci_device ppdev = {
+ .seg = pci_domain_nr(dev->bus),
+ .bus = dev->bus->number,
+ .devfn = dev->devfn
+ };
+ int err = HYPERVISOR_physdev_op(PHYSDEVOP_release_msix,
+ &ppdev);
+
+ if (err)
+ dev_warn(&dev->dev, "MSI-X release failed (%d)\n",
+ err);
+ }
/* Disable the device */
- xen_pcibk_reset_device(psdev->dev);
+ xen_pcibk_reset_device(dev);
kfree(dev_data);
- pci_set_drvdata(psdev->dev, NULL);
+ pci_set_drvdata(dev, NULL);
/* Clean-up the device */
- xen_pcibk_config_free_dyn_fields(psdev->dev);
- xen_pcibk_config_free_dev(psdev->dev);
+ xen_pcibk_config_free_dyn_fields(dev);
+ xen_pcibk_config_free_dev(dev);
- psdev->dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED;
- pci_dev_put(psdev->dev);
+ dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED;
+ pci_dev_put(dev);
kfree(psdev);
}
if (err)
goto config_release;
+ if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) {
+ struct physdev_pci_device ppdev = {
+ .seg = pci_domain_nr(dev->bus),
+ .bus = dev->bus->number,
+ .devfn = dev->devfn
+ };
+
+ err = HYPERVISOR_physdev_op(PHYSDEVOP_prepare_msix, &ppdev);
+ if (err)
+ dev_err(&dev->dev, "MSI-X preparation failed (%d)\n",
+ err);
+ }
+
/* We need the device active to save the state. */
dev_dbg(&dev->dev, "save state of device\n");
pci_save_state(dev);
if (dev->msi_enabled)
pci_disable_msi(dev);
#endif
- pci_disable_device(dev);
+ if (pci_is_enabled(dev))
+ pci_disable_device(dev);
pci_write_config_word(dev, PCI_COMMAND, 0);
#include <linux/export.h>
#include <linux/types.h>
#include <linux/acpi.h>
-#include <acpi/acpi_drivers.h>
#include <xen/acpi.h>
#ifdef CONFIG_ACPI
ihold(bdev->bd_inode);
return bdev;
}
+EXPORT_SYMBOL(bdgrab);
long nr_blockdev_pages(void)
{
if (tree_mod_dont_log(fs_info, NULL))
return 0;
+ __tree_mod_log_free_eb(fs_info, old_root);
+
ret = tree_mod_alloc(fs_info, flags, &tm);
if (ret < 0)
goto out;
static noinline void
tree_mod_log_eb_copy(struct btrfs_fs_info *fs_info, struct extent_buffer *dst,
struct extent_buffer *src, unsigned long dst_offset,
- unsigned long src_offset, int nr_items)
+ unsigned long src_offset, int nr_items, int log_removal)
{
int ret;
int i;
}
for (i = 0; i < nr_items; i++) {
- ret = tree_mod_log_insert_key_locked(fs_info, src,
- i + src_offset,
- MOD_LOG_KEY_REMOVE);
- BUG_ON(ret < 0);
+ if (log_removal) {
+ ret = tree_mod_log_insert_key_locked(fs_info, src,
+ i + src_offset,
+ MOD_LOG_KEY_REMOVE);
+ BUG_ON(ret < 0);
+ }
ret = tree_mod_log_insert_key_locked(fs_info, dst,
i + dst_offset,
MOD_LOG_KEY_ADD);
ret = btrfs_dec_ref(trans, root, buf, 1, 1);
BUG_ON(ret); /* -ENOMEM */
}
- tree_mod_log_free_eb(root->fs_info, buf);
clean_tree_block(trans, root, buf);
*last_ref = 1;
}
btrfs_set_node_ptr_generation(parent, parent_slot,
trans->transid);
btrfs_mark_buffer_dirty(parent);
+ tree_mod_log_free_eb(root->fs_info, buf);
btrfs_free_tree_block(trans, root, buf, parent_start,
last_ref);
}
goto enospc;
}
- tree_mod_log_free_eb(root->fs_info, root->node);
tree_mod_log_set_root_pointer(root, child);
rcu_assign_pointer(root->node, child);
push_items = min(src_nritems - 8, push_items);
tree_mod_log_eb_copy(root->fs_info, dst, src, dst_nritems, 0,
- push_items);
+ push_items, 1);
copy_extent_buffer(dst, src,
btrfs_node_key_ptr_offset(dst_nritems),
btrfs_node_key_ptr_offset(0),
sizeof(struct btrfs_key_ptr));
tree_mod_log_eb_copy(root->fs_info, dst, src, 0,
- src_nritems - push_items, push_items);
+ src_nritems - push_items, push_items, 1);
copy_extent_buffer(dst, src,
btrfs_node_key_ptr_offset(0),
btrfs_node_key_ptr_offset(src_nritems - push_items),
int mid;
int ret;
u32 c_nritems;
+ int tree_mod_log_removal = 1;
c = path->nodes[level];
WARN_ON(btrfs_header_generation(c) != trans->transid);
if (c == root->node) {
/* trying to split the root, lets make a new one */
ret = insert_new_root(trans, root, path, level + 1);
+ /*
+ * removal of root nodes has been logged by
+ * tree_mod_log_set_root_pointer due to locking
+ */
+ tree_mod_log_removal = 0;
if (ret)
return ret;
} else {
(unsigned long)btrfs_header_chunk_tree_uuid(split),
BTRFS_UUID_SIZE);
- tree_mod_log_eb_copy(root->fs_info, split, c, 0, mid, c_nritems - mid);
+ tree_mod_log_eb_copy(root->fs_info, split, c, 0, mid, c_nritems - mid,
+ tree_mod_log_removal);
copy_extent_buffer(split, c,
btrfs_node_key_ptr_offset(0),
btrfs_node_key_ptr_offset(mid),
0, objectid, NULL, 0, 0, 0);
if (IS_ERR(leaf)) {
ret = PTR_ERR(leaf);
+ leaf = NULL;
goto fail;
}
btrfs_tree_unlock(leaf);
+ return root;
+
fail:
- if (ret)
- return ERR_PTR(ret);
+ if (leaf) {
+ btrfs_tree_unlock(leaf);
+ free_extent_buffer(leaf);
+ }
+ kfree(root);
- return root;
+ return ERR_PTR(ret);
}
static struct btrfs_root *alloc_log_tree(struct btrfs_trans_handle *trans,
if (btrfs_root_refs(&root->root_item) == 0)
synchronize_srcu(&fs_info->subvol_srcu);
- if (fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) {
+ if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state)) {
btrfs_free_log(NULL, root);
btrfs_free_log_root_tree(NULL, fs_info);
}
cache->bytes_super += stripe_len;
ret = add_excluded_extent(root, cache->key.objectid,
stripe_len);
- BUG_ON(ret); /* -ENOMEM */
+ if (ret)
+ return ret;
}
for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
cache->key.objectid, bytenr,
0, &logical, &nr, &stripe_len);
- BUG_ON(ret); /* -ENOMEM */
+ if (ret)
+ return ret;
while (nr--) {
cache->bytes_super += stripe_len;
ret = add_excluded_extent(root, logical[nr],
stripe_len);
- BUG_ON(ret); /* -ENOMEM */
+ if (ret) {
+ kfree(logical);
+ return ret;
+ }
}
kfree(logical);
if (ret && !insert) {
err = -ENOENT;
goto out;
+ } else if (ret) {
+ err = -EIO;
+ WARN_ON(1);
+ goto out;
}
- BUG_ON(ret); /* Corruption */
leaf = path->nodes[0];
item_size = btrfs_item_size_nr(leaf, path->slots[0]);
spin_lock(&sinfo->lock);
spin_lock(&block_rsv->lock);
- block_rsv->size = num_bytes;
+ block_rsv->size = min_t(u64, num_bytes, 512 * 1024 * 1024);
num_bytes = sinfo->bytes_used + sinfo->bytes_pinned +
sinfo->bytes_reserved + sinfo->bytes_readonly +
* If the inodes csum_bytes is the same as the original
* csum_bytes then we know we haven't raced with any free()ers
* so we can just reduce our inodes csum bytes and carry on.
- * Otherwise we have to do the normal free thing to account for
- * the case that the free side didn't free up its reserve
- * because of this outstanding reservation.
*/
- if (BTRFS_I(inode)->csum_bytes == csum_bytes)
+ if (BTRFS_I(inode)->csum_bytes == csum_bytes) {
calc_csum_metadata_size(inode, num_bytes, 0);
- else
- to_free = calc_csum_metadata_size(inode, num_bytes, 0);
+ } else {
+ u64 orig_csum_bytes = BTRFS_I(inode)->csum_bytes;
+ u64 bytes;
+
+ /*
+ * This is tricky, but first we need to figure out how much we
+ * free'd from any free-ers that occured during this
+ * reservation, so we reset ->csum_bytes to the csum_bytes
+ * before we dropped our lock, and then call the free for the
+ * number of bytes that were freed while we were trying our
+ * reservation.
+ */
+ bytes = csum_bytes - BTRFS_I(inode)->csum_bytes;
+ BTRFS_I(inode)->csum_bytes = csum_bytes;
+ to_free = calc_csum_metadata_size(inode, bytes, 0);
+
+
+ /*
+ * Now we need to see how much we would have freed had we not
+ * been making this reservation and our ->csum_bytes were not
+ * artificially inflated.
+ */
+ BTRFS_I(inode)->csum_bytes = csum_bytes - num_bytes;
+ bytes = csum_bytes - orig_csum_bytes;
+ bytes = calc_csum_metadata_size(inode, bytes, 0);
+
+ /*
+ * Now reset ->csum_bytes to what it should be. If bytes is
+ * more than to_free then we would have free'd more space had we
+ * not had an artificially high ->csum_bytes, so we need to free
+ * the remainder. If bytes is the same or less then we don't
+ * need to do anything, the other free-ers did the correct
+ * thing.
+ */
+ BTRFS_I(inode)->csum_bytes = orig_csum_bytes - num_bytes;
+ if (bytes > to_free)
+ to_free = bytes - to_free;
+ else
+ to_free = 0;
+ }
spin_unlock(&BTRFS_I(inode)->lock);
if (dropped)
to_free += btrfs_calc_trans_metadata_size(root, dropped);
* info has super bytes accounted for, otherwise we'll think
* we have more space than we actually do.
*/
- exclude_super_stripes(root, cache);
+ ret = exclude_super_stripes(root, cache);
+ if (ret) {
+ /*
+ * We may have excluded something, so call this just in
+ * case.
+ */
+ free_excluded_extents(root, cache);
+ kfree(cache->free_space_ctl);
+ kfree(cache);
+ goto error;
+ }
/*
* check for two cases, either we are full, and therefore
cache->last_byte_to_unpin = (u64)-1;
cache->cached = BTRFS_CACHE_FINISHED;
- exclude_super_stripes(root, cache);
+ ret = exclude_super_stripes(root, cache);
+ if (ret) {
+ /*
+ * We may have excluded something, so call this just in
+ * case.
+ */
+ free_excluded_extents(root, cache);
+ kfree(cache->free_space_ctl);
+ kfree(cache);
+ return ret;
+ }
add_new_free_space(cache, root->fs_info, chunk_offset,
chunk_offset + size);
GFP_NOFS);
}
+int extent_range_clear_dirty_for_io(struct inode *inode, u64 start, u64 end)
+{
+ unsigned long index = start >> PAGE_CACHE_SHIFT;
+ unsigned long end_index = end >> PAGE_CACHE_SHIFT;
+ struct page *page;
+
+ while (index <= end_index) {
+ page = find_get_page(inode->i_mapping, index);
+ BUG_ON(!page); /* Pages should be in the extent_io_tree */
+ clear_page_dirty_for_io(page);
+ page_cache_release(page);
+ index++;
+ }
+ return 0;
+}
+
+int extent_range_redirty_for_io(struct inode *inode, u64 start, u64 end)
+{
+ unsigned long index = start >> PAGE_CACHE_SHIFT;
+ unsigned long end_index = end >> PAGE_CACHE_SHIFT;
+ struct page *page;
+
+ while (index <= end_index) {
+ page = find_get_page(inode->i_mapping, index);
+ BUG_ON(!page); /* Pages should be in the extent_io_tree */
+ account_page_redirty(page);
+ __set_page_dirty_nobuffers(page);
+ page_cache_release(page);
+ index++;
+ }
+ return 0;
+}
+
/*
* helper function to set both pages and extents in the tree writeback
*/
unsigned long *map_len);
int extent_range_uptodate(struct extent_io_tree *tree,
u64 start, u64 end);
+int extent_range_clear_dirty_for_io(struct inode *inode, u64 start, u64 end);
+int extent_range_redirty_for_io(struct inode *inode, u64 start, u64 end);
int extent_clear_unlock_delalloc(struct inode *inode,
struct extent_io_tree *tree,
u64 start, u64 end, struct page *locked_page,
csums_in_item = btrfs_item_size_nr(leaf, path->slots[0]);
csums_in_item /= csum_size;
- if (csum_offset >= csums_in_item) {
+ if (csum_offset == csums_in_item) {
ret = -EFBIG;
goto fail;
+ } else if (csum_offset > csums_in_item) {
+ goto fail;
}
}
item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_csum_item);
return -ENOMEM;
sector_sum = sums->sums;
- trans->adding_csums = 1;
again:
next_offset = (u64)-1;
found_next = 0;
goto again;
}
out:
- trans->adding_csums = 0;
btrfs_free_path(path);
return ret;
}
compressed = test_bit(EXTENT_FLAG_COMPRESSED, &em->flags);
clear_bit(EXTENT_FLAG_PINNED, &em->flags);
+ clear_bit(EXTENT_FLAG_LOGGING, &flags);
remove_extent_mapping(em_tree, em);
if (no_splits)
goto next;
{
struct inode *inode = file_inode(file);
struct extent_state *cached_state = NULL;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
u64 cur_offset;
u64 last_byte;
u64 alloc_start;
ret = btrfs_check_data_free_space(inode, alloc_end - alloc_start);
if (ret)
return ret;
+ if (root->fs_info->quota_enabled) {
+ ret = btrfs_qgroup_reserve(root, alloc_end - alloc_start);
+ if (ret)
+ goto out_reserve_fail;
+ }
/*
* wait for ordered IO before we have any locks. We'll loop again
&cached_state, GFP_NOFS);
out:
mutex_unlock(&inode->i_mutex);
+ if (root->fs_info->quota_enabled)
+ btrfs_qgroup_free(root, alloc_end - alloc_start);
+out_reserve_fail:
/* Let go of our reservation. */
btrfs_free_reserved_data_space(inode, alloc_end - alloc_start);
return ret;
int i;
int will_compress;
int compress_type = root->fs_info->compress_type;
+ int redirty = 0;
/* if this is a small write inside eof, kick off a defrag */
if ((end - start + 1) < 16 * 1024 &&
if (BTRFS_I(inode)->force_compress)
compress_type = BTRFS_I(inode)->force_compress;
+ /*
+ * we need to call clear_page_dirty_for_io on each
+ * page in the range. Otherwise applications with the file
+ * mmap'd can wander in and change the page contents while
+ * we are compressing them.
+ *
+ * If the compression fails for any reason, we set the pages
+ * dirty again later on.
+ */
+ extent_range_clear_dirty_for_io(inode, start, end);
+ redirty = 1;
ret = btrfs_compress_pages(compress_type,
inode->i_mapping, start,
total_compressed, pages,
__set_page_dirty_nobuffers(locked_page);
/* unlocked later on in the async handlers */
}
+ if (redirty)
+ extent_range_redirty_for_io(inode, start, end);
add_async_extent(async_cow, start, end - start + 1,
0, NULL, 0, BTRFS_COMPRESS_NONE);
*num_added += 1;
struct btrfs_ordered_sum *sum;
list_for_each_entry(sum, list, list) {
+ trans->adding_csums = 1;
btrfs_csum_file_blocks(trans,
BTRFS_I(inode)->root->fs_info->csum_root, sum);
+ trans->adding_csums = 0;
}
return 0;
}
key.type = BTRFS_EXTENT_DATA_KEY;
key.offset = start;
+ path->leave_spinning = 1;
if (merge) {
struct btrfs_file_extent_item *fi;
u64 extent_len;
btrfs_mark_buffer_dirty(leaf);
inode_add_bytes(inode, len);
+ btrfs_release_path(path);
ret = btrfs_inc_extent_ref(trans, root, new->bytenr,
new->disk_len, 0,
ret = 1;
out_free_path:
btrfs_release_path(path);
+ path->leave_spinning = 0;
btrfs_end_transaction(trans, root);
out_unlock:
unlock_extent_cached(&BTRFS_I(inode)->io_tree, lock_start, lock_end,
* 1 for the dir item
* 1 for the dir index
* 1 for the inode ref
- * 1 for the inode ref in the tree log
- * 2 for the dir entries in the log
* 1 for the inode
*/
- trans = btrfs_start_transaction(root, 8);
+ trans = btrfs_start_transaction(root, 5);
if (!IS_ERR(trans) || PTR_ERR(trans) != -ENOSPC)
return trans;
* inodes. So 5 * 2 is 10, plus 1 for the new link, so 11 total items
* should cover the worst case number of items we'll modify.
*/
- trans = btrfs_start_transaction(root, 20);
+ trans = btrfs_start_transaction(root, 11);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
goto out_notrans;
void btrfs_tree_lock(struct extent_buffer *eb);
void btrfs_tree_unlock(struct extent_buffer *eb);
-int btrfs_try_spin_lock(struct extent_buffer *eb);
void btrfs_tree_read_lock(struct extent_buffer *eb);
void btrfs_tree_read_unlock(struct extent_buffer *eb);
INIT_LIST_HEAD(&splice);
INIT_LIST_HEAD(&works);
+ mutex_lock(&root->fs_info->ordered_operations_mutex);
spin_lock(&root->fs_info->ordered_extent_lock);
list_splice_init(&root->fs_info->ordered_extents, &splice);
while (!list_empty(&splice)) {
cond_resched();
}
+ mutex_unlock(&root->fs_info->ordered_operations_mutex);
}
/*
ret = btrfs_find_all_roots(trans, fs_info, node->bytenr,
sgn > 0 ? node->seq - 1 : node->seq, &roots);
if (ret < 0)
- goto out;
+ return ret;
spin_lock(&fs_info->qgroup_lock);
quota_root = fs_info->quota_root;
ret = 0;
unlock:
spin_unlock(&fs_info->qgroup_lock);
-out:
ulist_free(roots);
ulist_free(tmp);
if ((qg->lim_flags & BTRFS_QGROUP_LIMIT_MAX_RFER) &&
qg->reserved + qg->rfer + num_bytes >
- qg->max_rfer)
+ qg->max_rfer) {
ret = -EDQUOT;
+ goto out;
+ }
if ((qg->lim_flags & BTRFS_QGROUP_LIMIT_MAX_EXCL) &&
qg->reserved + qg->excl + num_bytes >
- qg->max_excl)
+ qg->max_excl) {
ret = -EDQUOT;
+ goto out;
+ }
list_for_each_entry(glist, &qg->groups, next_group) {
ulist_add(ulist, glist->group->qgroupid,
(uintptr_t)glist->group, GFP_ATOMIC);
}
}
- if (ret)
- goto out;
/*
* no limits exceeded, now record the reservation into all qgroups
eb = path->nodes[0];
ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
item_size = btrfs_item_size_nr(eb, path->slots[0]);
- btrfs_release_path(path);
if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
do {
ret < 0 ? -1 : ref_level,
ret < 0 ? -1 : ref_root);
} while (ret != 1);
+ btrfs_release_path(path);
} else {
+ btrfs_release_path(path);
swarn.path = path;
swarn.dev = dev;
iterate_extent_inodes(fs_info, found_key.objectid,
found_key.type != key.type) {
key.offset += right_len;
break;
- } else {
- if (found_key.offset != key.offset + right_len) {
- /* Should really not happen */
- ret = -EIO;
- goto out;
- }
+ }
+ if (found_key.offset != key.offset + right_len) {
+ ret = 0;
+ goto out;
}
key = found_key;
}
btrfs_trans_release_metadata(trans, root);
trans->block_rsv = NULL;
- /*
- * the same root has to be passed to start_transaction and
- * end_transaction. Subvolume quota depends on this.
- */
- WARN_ON(trans->root != root);
if (trans->qgroup_reserved) {
- btrfs_qgroup_free(root, trans->qgroup_reserved);
+ /*
+ * the same root has to be passed here between start_transaction
+ * and end_transaction. Subvolume quota depends on this.
+ */
+ btrfs_qgroup_free(trans->root, trans->qgroup_reserved);
trans->qgroup_reserved = 0;
}
__btrfs_close_devices(fs_devices);
free_fs_devices(fs_devices);
}
+ /*
+ * Wait for rcu kworkers under __btrfs_close_devices
+ * to finish all blkdev_puts so device is really
+ * free when umount is done.
+ */
+ rcu_barrier();
return ret;
}
em = lookup_extent_mapping(em_tree, chunk_start, 1);
read_unlock(&em_tree->lock);
- BUG_ON(!em || em->start != chunk_start);
+ if (!em) {
+ printk(KERN_ERR "btrfs: couldn't find em for chunk %Lu\n",
+ chunk_start);
+ return -EIO;
+ }
+
+ if (em->start != chunk_start) {
+ printk(KERN_ERR "btrfs: bad chunk start, em=%Lu, wanted=%Lu\n",
+ em->start, chunk_start);
+ free_extent_map(em);
+ return -EIO;
+ }
map = (struct map_lookup *)em->bdev;
length = em->len;
}
}
- /* mechlistMIC */
- if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
- /* Check if we have reached the end of the blob, but with
- no mechListMic (e.g. NTLMSSP instead of KRB5) */
- if (ctx.error == ASN1_ERR_DEC_EMPTY)
- goto decode_negtoken_exit;
- cFYI(1, "Error decoding last part negTokenInit exit3");
- return 0;
- } else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
- /* tag = 3 indicating mechListMIC */
- cFYI(1, "Exit 4 cls = %d con = %d tag = %d end = %p (%d)",
- cls, con, tag, end, *end);
- return 0;
- }
-
- /* sequence */
- if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
- cFYI(1, "Error decoding last part negTokenInit exit5");
- return 0;
- } else if ((cls != ASN1_UNI) || (con != ASN1_CON)
- || (tag != ASN1_SEQ)) {
- cFYI(1, "cls = %d con = %d tag = %d end = %p (%d)",
- cls, con, tag, end, *end);
- }
-
- /* sequence of */
- if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
- cFYI(1, "Error decoding last part negTokenInit exit 7");
- return 0;
- } else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
- cFYI(1, "Exit 8 cls = %d con = %d tag = %d end = %p (%d)",
- cls, con, tag, end, *end);
- return 0;
- }
-
- /* general string */
- if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
- cFYI(1, "Error decoding last part negTokenInit exit9");
- return 0;
- } else if ((cls != ASN1_UNI) || (con != ASN1_PRI)
- || (tag != ASN1_GENSTR)) {
- cFYI(1, "Exit10 cls = %d con = %d tag = %d end = %p (%d)",
- cls, con, tag, end, *end);
- return 0;
- }
- cFYI(1, "Need to call asn1_octets_decode() function for %s",
- ctx.pointer); /* is this UTF-8 or ASCII? */
-decode_negtoken_exit:
+ /*
+ * We currently ignore anything at the end of the SPNEGO blob after
+ * the mechTypes have been parsed, since none of that info is
+ * used at the moment.
+ */
return 1;
}
__u8 cifs_client_guid[SMB2_CLIENT_GUID_SIZE];
#endif
+/*
+ * Bumps refcount for cifs super block.
+ * Note that it should be only called if a referece to VFS super block is
+ * already held, e.g. in open-type syscalls context. Otherwise it can race with
+ * atomic_dec_and_test in deactivate_locked_super.
+ */
+void
+cifs_sb_active(struct super_block *sb)
+{
+ struct cifs_sb_info *server = CIFS_SB(sb);
+
+ if (atomic_inc_return(&server->active) == 1)
+ atomic_inc(&sb->s_active);
+}
+
+void
+cifs_sb_deactive(struct super_block *sb)
+{
+ struct cifs_sb_info *server = CIFS_SB(sb);
+
+ if (atomic_dec_and_test(&server->active))
+ deactivate_super(sb);
+}
+
static int
cifs_read_super(struct super_block *sb)
{
.kill_sb = cifs_kill_sb,
/* .fs_flags */
};
+MODULE_ALIAS_FS("cifs");
const struct inode_operations cifs_dir_inode_ops = {
.create = cifs_create,
.atomic_open = cifs_atomic_open,
extern const struct address_space_operations cifs_addr_ops;
extern const struct address_space_operations cifs_addr_ops_smallbuf;
+/* Functions related to super block operations */
+extern void cifs_sb_active(struct super_block *sb);
+extern void cifs_sb_deactive(struct super_block *sb);
+
/* Functions related to inodes */
extern const struct inode_operations cifs_dir_inode_ops;
extern struct inode *cifs_root_iget(struct super_block *);
INIT_WORK(&cfile->oplock_break, cifs_oplock_break);
mutex_init(&cfile->fh_mutex);
+ cifs_sb_active(inode->i_sb);
+
/*
* If the server returned a read oplock and we have mandatory brlocks,
* set oplock level to None.
struct cifs_tcon *tcon = tlink_tcon(cifs_file->tlink);
struct TCP_Server_Info *server = tcon->ses->server;
struct cifsInodeInfo *cifsi = CIFS_I(inode);
- struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+ struct super_block *sb = inode->i_sb;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
struct cifsLockInfo *li, *tmp;
struct cifs_fid fid;
struct cifs_pending_open open;
cifs_put_tlink(cifs_file->tlink);
dput(cifs_file->dentry);
+ cifs_sb_deactive(sb);
kfree(cifs_file);
}
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc != 0) {
- rc = -ETXTBSY;
+ rc = -EBUSY;
goto undo_setattr;
}
if (rc == -ENOENT)
rc = 0;
else if (rc != 0) {
- rc = -ETXTBSY;
+ rc = -EBUSY;
goto undo_rename;
}
cifsInode->delete_pending = true;
cifs_drop_nlink(inode);
} else if (rc == -ENOENT) {
d_drop(dentry);
- } else if (rc == -ETXTBSY) {
+ } else if (rc == -EBUSY) {
if (server->ops->rename_pending_delete) {
rc = server->ops->rename_pending_delete(full_path,
dentry, xid);
if (rc == 0)
cifs_drop_nlink(inode);
}
- if (rc == -ETXTBSY)
- rc = -EBUSY;
} else if ((rc == -EACCES) && (dosattr == 0) && inode) {
attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
if (attrs == NULL) {
* source. Note that cross directory moves do not work with
* rename by filehandle to various Windows servers.
*/
- if (rc == 0 || rc != -ETXTBSY)
+ if (rc == 0 || rc != -EBUSY)
goto do_rename_exit;
/* open-file renames don't work across directories */
{ERRdiffdevice, -EXDEV},
{ERRnofiles, -ENOENT},
{ERRwriteprot, -EROFS},
- {ERRbadshare, -ETXTBSY},
+ {ERRbadshare, -EBUSY},
{ERRlock, -EACCES},
{ERRunsup, -EINVAL},
{ERRnosuchshare, -ENXIO},
}
*ret_pointer = iov;
+ ret = -EFAULT;
+ if (!access_ok(VERIFY_READ, uvector, nr_segs*sizeof(*uvector)))
+ goto out;
+
/*
* Single unix specification:
* We should -EINVAL if an element length is not >= 0 and fitting an
if (!file->f_op)
goto out;
- ret = -EFAULT;
- if (!access_ok(VERIFY_READ, uvector, nr_segs*sizeof(*uvector)))
- goto out;
-
- tot_len = compat_rw_copy_check_uvector(type, uvector, nr_segs,
+ ret = compat_rw_copy_check_uvector(type, uvector, nr_segs,
UIO_FASTIOV, iovstack, &iov);
- if (tot_len == 0) {
- ret = 0;
+ if (ret <= 0)
goto out;
- }
+ tot_len = ret;
ret = rw_verify_area(type, file, pos, tot_len);
if (ret < 0)
goto out;
bool slash = false;
int error = 0;
- br_read_lock(&vfsmount_lock);
while (dentry != root->dentry || vfsmnt != root->mnt) {
struct dentry * parent;
if (!error && !slash)
error = prepend(buffer, buflen, "/", 1);
-out:
- br_read_unlock(&vfsmount_lock);
return error;
global_root:
error = prepend(buffer, buflen, "/", 1);
if (!error)
error = is_mounted(vfsmnt) ? 1 : 2;
- goto out;
+ return error;
}
/**
int error;
prepend(&res, &buflen, "\0", 1);
+ br_read_lock(&vfsmount_lock);
write_seqlock(&rename_lock);
error = prepend_path(path, root, &res, &buflen);
write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
if (error < 0)
return ERR_PTR(error);
int error;
prepend(&res, &buflen, "\0", 1);
+ br_read_lock(&vfsmount_lock);
write_seqlock(&rename_lock);
error = prepend_path(path, &root, &res, &buflen);
write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
if (error > 1)
error = -EINVAL;
return path->dentry->d_op->d_dname(path->dentry, buf, buflen);
get_fs_root(current->fs, &root);
+ br_read_lock(&vfsmount_lock);
write_seqlock(&rename_lock);
error = path_with_deleted(path, &root, &res, &buflen);
+ write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
if (error < 0)
res = ERR_PTR(error);
- write_sequnlock(&rename_lock);
path_put(&root);
return res;
}
get_fs_root_and_pwd(current->fs, &root, &pwd);
error = -ENOENT;
+ br_read_lock(&vfsmount_lock);
write_seqlock(&rename_lock);
if (!d_unlinked(pwd.dentry)) {
unsigned long len;
prepend(&cwd, &buflen, "\0", 1);
error = prepend_path(&pwd, &root, &cwd, &buflen);
write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
if (error < 0)
goto out;
}
} else {
write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
}
out:
* as writing the quota to disk may need the lock as well.
*/
/* Quota is already initialized in iput() */
- ext2_xattr_delete_inode(inode);
dquot_free_inode(inode);
dquot_drop(inode);
#include "ext2.h"
#include "acl.h"
#include "xip.h"
+#include "xattr.h"
static int __ext2_write_inode(struct inode *inode, int do_sync);
inode->i_size = 0;
if (inode->i_blocks)
ext2_truncate_blocks(inode, 0);
+ ext2_xattr_delete_inode(inode);
}
invalidate_inode_buffers(inode);
return bdev;
fail:
- ext3_msg(sb, "error: failed to open journal device %s: %ld",
+ ext3_msg(sb, KERN_ERR, "error: failed to open journal device %s: %ld",
__bdevname(dev, b), PTR_ERR(bdev));
return NULL;
/*todo: use simple_strtoll with >32bit ext3 */
sb_block = simple_strtoul(options, &options, 0);
if (*options && *options != ',') {
- ext3_msg(sb, "error: invalid sb specification: %s",
+ ext3_msg(sb, KERN_ERR, "error: invalid sb specification: %s",
(char *) *data);
return 1;
}
*/
struct flex_groups {
- atomic_t free_inodes;
- atomic_t free_clusters;
- atomic_t used_dirs;
+ atomic64_t free_clusters;
+ atomic_t free_inodes;
+ atomic_t used_dirs;
};
#define EXT4_BG_INODE_UNINIT 0x0001 /* Inode table/bitmap not in use */
extern int __init ext4_init_pageio(void);
extern void ext4_add_complete_io(ext4_io_end_t *io_end);
extern void ext4_exit_pageio(void);
-extern void ext4_ioend_wait(struct inode *);
+extern void ext4_ioend_shutdown(struct inode *);
extern void ext4_free_io_end(ext4_io_end_t *io);
extern ext4_io_end_t *ext4_init_io_end(struct inode *inode, gfp_t flags);
extern void ext4_end_io_work(struct work_struct *work);
unsigned short ext1_ee_len, ext2_ee_len, max_len;
/*
- * Make sure that either both extents are uninitialized, or
- * both are _not_.
+ * Make sure that both extents are initialized. We don't merge
+ * uninitialized extents so that we can be sure that end_io code has
+ * the extent that was written properly split out and conversion to
+ * initialized is trivial.
*/
- if (ext4_ext_is_uninitialized(ex1) ^ ext4_ext_is_uninitialized(ex2))
+ if (ext4_ext_is_uninitialized(ex1) || ext4_ext_is_uninitialized(ex2))
return 0;
if (ext4_ext_is_uninitialized(ex1))
{
ext4_fsblk_t newblock;
ext4_lblk_t ee_block;
- struct ext4_extent *ex, newex, orig_ex;
+ struct ext4_extent *ex, newex, orig_ex, zero_ex;
struct ext4_extent *ex2 = NULL;
unsigned int ee_len, depth;
int err = 0;
newblock = split - ee_block + ext4_ext_pblock(ex);
BUG_ON(split < ee_block || split >= (ee_block + ee_len));
+ BUG_ON(!ext4_ext_is_uninitialized(ex) &&
+ split_flag & (EXT4_EXT_MAY_ZEROOUT |
+ EXT4_EXT_MARK_UNINIT1 |
+ EXT4_EXT_MARK_UNINIT2));
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
if (err == -ENOSPC && (EXT4_EXT_MAY_ZEROOUT & split_flag)) {
if (split_flag & (EXT4_EXT_DATA_VALID1|EXT4_EXT_DATA_VALID2)) {
- if (split_flag & EXT4_EXT_DATA_VALID1)
+ if (split_flag & EXT4_EXT_DATA_VALID1) {
err = ext4_ext_zeroout(inode, ex2);
- else
+ zero_ex.ee_block = ex2->ee_block;
+ zero_ex.ee_len = cpu_to_le16(
+ ext4_ext_get_actual_len(ex2));
+ ext4_ext_store_pblock(&zero_ex,
+ ext4_ext_pblock(ex2));
+ } else {
err = ext4_ext_zeroout(inode, ex);
- } else
+ zero_ex.ee_block = ex->ee_block;
+ zero_ex.ee_len = cpu_to_le16(
+ ext4_ext_get_actual_len(ex));
+ ext4_ext_store_pblock(&zero_ex,
+ ext4_ext_pblock(ex));
+ }
+ } else {
err = ext4_ext_zeroout(inode, &orig_ex);
+ zero_ex.ee_block = orig_ex.ee_block;
+ zero_ex.ee_len = cpu_to_le16(
+ ext4_ext_get_actual_len(&orig_ex));
+ ext4_ext_store_pblock(&zero_ex,
+ ext4_ext_pblock(&orig_ex));
+ }
if (err)
goto fix_extent_len;
ex->ee_len = cpu_to_le16(ee_len);
ext4_ext_try_to_merge(handle, inode, path, ex);
err = ext4_ext_dirty(handle, inode, path + path->p_depth);
+ if (err)
+ goto fix_extent_len;
+
+ /* update extent status tree */
+ err = ext4_es_zeroout(inode, &zero_ex);
+
goto out;
} else if (err)
goto fix_extent_len;
int err = 0;
int uninitialized;
int split_flag1, flags1;
+ int allocated = map->m_len;
depth = ext_depth(inode);
ex = path[depth].p_ext;
map->m_lblk + map->m_len, split_flag1, flags1);
if (err)
goto out;
+ } else {
+ allocated = ee_len - (map->m_lblk - ee_block);
}
-
+ /*
+ * Update path is required because previous ext4_split_extent_at() may
+ * result in split of original leaf or extent zeroout.
+ */
ext4_ext_drop_refs(path);
path = ext4_ext_find_extent(inode, map->m_lblk, path);
if (IS_ERR(path))
return PTR_ERR(path);
+ depth = ext_depth(inode);
+ ex = path[depth].p_ext;
+ uninitialized = ext4_ext_is_uninitialized(ex);
+ split_flag1 = 0;
if (map->m_lblk >= ee_block) {
- split_flag1 = split_flag & (EXT4_EXT_MAY_ZEROOUT |
- EXT4_EXT_DATA_VALID2);
- if (uninitialized)
+ split_flag1 = split_flag & EXT4_EXT_DATA_VALID2;
+ if (uninitialized) {
split_flag1 |= EXT4_EXT_MARK_UNINIT1;
- if (split_flag & EXT4_EXT_MARK_UNINIT2)
- split_flag1 |= EXT4_EXT_MARK_UNINIT2;
+ split_flag1 |= split_flag & (EXT4_EXT_MAY_ZEROOUT |
+ EXT4_EXT_MARK_UNINIT2);
+ }
err = ext4_split_extent_at(handle, inode, path,
map->m_lblk, split_flag1, flags);
if (err)
ext4_ext_show_leaf(inode, path);
out:
- return err ? err : map->m_len;
+ return err ? err : allocated;
}
/*
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
allocated = ee_len - (map->m_lblk - ee_block);
+ zero_ex.ee_len = 0;
trace_ext4_ext_convert_to_initialized_enter(inode, map, ex);
if (EXT4_EXT_MAY_ZEROOUT & split_flag)
max_zeroout = sbi->s_extent_max_zeroout_kb >>
- inode->i_sb->s_blocksize_bits;
+ (inode->i_sb->s_blocksize_bits - 10);
/* If extent is less than s_max_zeroout_kb, zeroout directly */
if (max_zeroout && (ee_len <= max_zeroout)) {
err = ext4_ext_zeroout(inode, ex);
if (err)
goto out;
+ zero_ex.ee_block = ex->ee_block;
+ zero_ex.ee_len = cpu_to_le16(ext4_ext_get_actual_len(ex));
+ ext4_ext_store_pblock(&zero_ex, ext4_ext_pblock(ex));
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
err = allocated;
out:
+ /* If we have gotten a failure, don't zero out status tree */
+ if (!err)
+ err = ext4_es_zeroout(inode, &zero_ex);
return err ? err : allocated;
}
"block %llu, max_blocks %u\n", inode->i_ino,
(unsigned long long)ee_block, ee_len);
- /* If extent is larger than requested then split is required */
+ /* If extent is larger than requested it is a clear sign that we still
+ * have some extent state machine issues left. So extent_split is still
+ * required.
+ * TODO: Once all related issues will be fixed this situation should be
+ * illegal.
+ */
if (ee_block != map->m_lblk || ee_len > map->m_len) {
+#ifdef EXT4_DEBUG
+ ext4_warning("Inode (%ld) finished: extent logical block %llu,"
+ " len %u; IO logical block %llu, len %u\n",
+ inode->i_ino, (unsigned long long)ee_block, ee_len,
+ (unsigned long long)map->m_lblk, map->m_len);
+#endif
err = ext4_split_unwritten_extents(handle, inode, map, path,
EXT4_GET_BLOCKS_CONVERT);
if (err < 0)
path, map->m_len);
} else
err = ret;
+ map->m_flags |= EXT4_MAP_MAPPED;
+ if (allocated > map->m_len)
+ allocated = map->m_len;
+ map->m_len = allocated;
goto out2;
}
/* buffered IO case */
allocated - map->m_len);
allocated = map->m_len;
}
+ map->m_len = allocated;
/*
* If we have done fallocate with the offset that is already
}
} else {
BUG_ON(allocated_clusters < reserved_clusters);
- /* We will claim quota for all newly allocated blocks.*/
- ext4_da_update_reserve_space(inode, allocated_clusters,
- 1);
if (reserved_clusters < allocated_clusters) {
struct ext4_inode_info *ei = EXT4_I(inode);
int reservation = allocated_clusters -
ei->i_reserved_data_blocks += reservation;
spin_unlock(&ei->i_block_reservation_lock);
}
+ /*
+ * We will claim quota for all newly allocated blocks.
+ * We're updating the reserved space *after* the
+ * correction above so we do not accidentally free
+ * all the metadata reservation because we might
+ * actually need it later on.
+ */
+ ext4_da_update_reserve_space(inode, allocated_clusters,
+ 1);
}
}
if (len <= EXT_UNINIT_MAX_LEN << blkbits)
flags |= EXT4_GET_BLOCKS_NO_NORMALIZE;
- /* Prevent race condition between unwritten */
- ext4_flush_unwritten_io(inode);
retry:
while (ret >= 0 && ret < max_blocks) {
map.m_lblk = map.m_lblk + ret;
static int ext4_es_can_be_merged(struct extent_status *es1,
struct extent_status *es2)
{
- if (es1->es_lblk + es1->es_len != es2->es_lblk)
+ if (ext4_es_status(es1) != ext4_es_status(es2))
return 0;
- if (ext4_es_status(es1) != ext4_es_status(es2))
+ if (((__u64) es1->es_len) + es2->es_len > 0xFFFFFFFFULL)
return 0;
- if ((ext4_es_is_written(es1) || ext4_es_is_unwritten(es1)) &&
- (ext4_es_pblock(es1) + es1->es_len != ext4_es_pblock(es2)))
+ if (((__u64) es1->es_lblk) + es1->es_len != es2->es_lblk)
return 0;
- return 1;
+ if ((ext4_es_is_written(es1) || ext4_es_is_unwritten(es1)) &&
+ (ext4_es_pblock(es1) + es1->es_len == ext4_es_pblock(es2)))
+ return 1;
+
+ if (ext4_es_is_hole(es1))
+ return 1;
+
+ /* we need to check delayed extent is without unwritten status */
+ if (ext4_es_is_delayed(es1) && !ext4_es_is_unwritten(es1))
+ return 1;
+
+ return 0;
}
static struct extent_status *
return es;
}
+#ifdef ES_AGGRESSIVE_TEST
+static void ext4_es_insert_extent_ext_check(struct inode *inode,
+ struct extent_status *es)
+{
+ struct ext4_ext_path *path = NULL;
+ struct ext4_extent *ex;
+ ext4_lblk_t ee_block;
+ ext4_fsblk_t ee_start;
+ unsigned short ee_len;
+ int depth, ee_status, es_status;
+
+ path = ext4_ext_find_extent(inode, es->es_lblk, NULL);
+ if (IS_ERR(path))
+ return;
+
+ depth = ext_depth(inode);
+ ex = path[depth].p_ext;
+
+ if (ex) {
+
+ ee_block = le32_to_cpu(ex->ee_block);
+ ee_start = ext4_ext_pblock(ex);
+ ee_len = ext4_ext_get_actual_len(ex);
+
+ ee_status = ext4_ext_is_uninitialized(ex) ? 1 : 0;
+ es_status = ext4_es_is_unwritten(es) ? 1 : 0;
+
+ /*
+ * Make sure ex and es are not overlap when we try to insert
+ * a delayed/hole extent.
+ */
+ if (!ext4_es_is_written(es) && !ext4_es_is_unwritten(es)) {
+ if (in_range(es->es_lblk, ee_block, ee_len)) {
+ pr_warn("ES insert assertation failed for "
+ "inode: %lu we can find an extent "
+ "at block [%d/%d/%llu/%c], but we "
+ "want to add an delayed/hole extent "
+ "[%d/%d/%llu/%llx]\n",
+ inode->i_ino, ee_block, ee_len,
+ ee_start, ee_status ? 'u' : 'w',
+ es->es_lblk, es->es_len,
+ ext4_es_pblock(es), ext4_es_status(es));
+ }
+ goto out;
+ }
+
+ /*
+ * We don't check ee_block == es->es_lblk, etc. because es
+ * might be a part of whole extent, vice versa.
+ */
+ if (es->es_lblk < ee_block ||
+ ext4_es_pblock(es) != ee_start + es->es_lblk - ee_block) {
+ pr_warn("ES insert assertation failed for inode: %lu "
+ "ex_status [%d/%d/%llu/%c] != "
+ "es_status [%d/%d/%llu/%c]\n", inode->i_ino,
+ ee_block, ee_len, ee_start,
+ ee_status ? 'u' : 'w', es->es_lblk, es->es_len,
+ ext4_es_pblock(es), es_status ? 'u' : 'w');
+ goto out;
+ }
+
+ if (ee_status ^ es_status) {
+ pr_warn("ES insert assertation failed for inode: %lu "
+ "ex_status [%d/%d/%llu/%c] != "
+ "es_status [%d/%d/%llu/%c]\n", inode->i_ino,
+ ee_block, ee_len, ee_start,
+ ee_status ? 'u' : 'w', es->es_lblk, es->es_len,
+ ext4_es_pblock(es), es_status ? 'u' : 'w');
+ }
+ } else {
+ /*
+ * We can't find an extent on disk. So we need to make sure
+ * that we don't want to add an written/unwritten extent.
+ */
+ if (!ext4_es_is_delayed(es) && !ext4_es_is_hole(es)) {
+ pr_warn("ES insert assertation failed for inode: %lu "
+ "can't find an extent at block %d but we want "
+ "to add an written/unwritten extent "
+ "[%d/%d/%llu/%llx]\n", inode->i_ino,
+ es->es_lblk, es->es_lblk, es->es_len,
+ ext4_es_pblock(es), ext4_es_status(es));
+ }
+ }
+out:
+ if (path) {
+ ext4_ext_drop_refs(path);
+ kfree(path);
+ }
+}
+
+static void ext4_es_insert_extent_ind_check(struct inode *inode,
+ struct extent_status *es)
+{
+ struct ext4_map_blocks map;
+ int retval;
+
+ /*
+ * Here we call ext4_ind_map_blocks to lookup a block mapping because
+ * 'Indirect' structure is defined in indirect.c. So we couldn't
+ * access direct/indirect tree from outside. It is too dirty to define
+ * this function in indirect.c file.
+ */
+
+ map.m_lblk = es->es_lblk;
+ map.m_len = es->es_len;
+
+ retval = ext4_ind_map_blocks(NULL, inode, &map, 0);
+ if (retval > 0) {
+ if (ext4_es_is_delayed(es) || ext4_es_is_hole(es)) {
+ /*
+ * We want to add a delayed/hole extent but this
+ * block has been allocated.
+ */
+ pr_warn("ES insert assertation failed for inode: %lu "
+ "We can find blocks but we want to add a "
+ "delayed/hole extent [%d/%d/%llu/%llx]\n",
+ inode->i_ino, es->es_lblk, es->es_len,
+ ext4_es_pblock(es), ext4_es_status(es));
+ return;
+ } else if (ext4_es_is_written(es)) {
+ if (retval != es->es_len) {
+ pr_warn("ES insert assertation failed for "
+ "inode: %lu retval %d != es_len %d\n",
+ inode->i_ino, retval, es->es_len);
+ return;
+ }
+ if (map.m_pblk != ext4_es_pblock(es)) {
+ pr_warn("ES insert assertation failed for "
+ "inode: %lu m_pblk %llu != "
+ "es_pblk %llu\n",
+ inode->i_ino, map.m_pblk,
+ ext4_es_pblock(es));
+ return;
+ }
+ } else {
+ /*
+ * We don't need to check unwritten extent because
+ * indirect-based file doesn't have it.
+ */
+ BUG_ON(1);
+ }
+ } else if (retval == 0) {
+ if (ext4_es_is_written(es)) {
+ pr_warn("ES insert assertation failed for inode: %lu "
+ "We can't find the block but we want to add "
+ "an written extent [%d/%d/%llu/%llx]\n",
+ inode->i_ino, es->es_lblk, es->es_len,
+ ext4_es_pblock(es), ext4_es_status(es));
+ return;
+ }
+ }
+}
+
+static inline void ext4_es_insert_extent_check(struct inode *inode,
+ struct extent_status *es)
+{
+ /*
+ * We don't need to worry about the race condition because
+ * caller takes i_data_sem locking.
+ */
+ BUG_ON(!rwsem_is_locked(&EXT4_I(inode)->i_data_sem));
+ if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
+ ext4_es_insert_extent_ext_check(inode, es);
+ else
+ ext4_es_insert_extent_ind_check(inode, es);
+}
+#else
+static inline void ext4_es_insert_extent_check(struct inode *inode,
+ struct extent_status *es)
+{
+}
+#endif
+
static int __es_insert_extent(struct inode *inode, struct extent_status *newes)
{
struct ext4_es_tree *tree = &EXT4_I(inode)->i_es_tree;
ext4_es_store_status(&newes, status);
trace_ext4_es_insert_extent(inode, &newes);
+ ext4_es_insert_extent_check(inode, &newes);
+
write_lock(&EXT4_I(inode)->i_es_lock);
err = __es_remove_extent(inode, lblk, end);
if (err != 0)
return err;
}
+int ext4_es_zeroout(struct inode *inode, struct ext4_extent *ex)
+{
+ ext4_lblk_t ee_block;
+ ext4_fsblk_t ee_pblock;
+ unsigned int ee_len;
+
+ ee_block = le32_to_cpu(ex->ee_block);
+ ee_len = ext4_ext_get_actual_len(ex);
+ ee_pblock = ext4_ext_pblock(ex);
+
+ if (ee_len == 0)
+ return 0;
+
+ return ext4_es_insert_extent(inode, ee_block, ee_len, ee_pblock,
+ EXTENT_STATUS_WRITTEN);
+}
+
static int ext4_es_shrink(struct shrinker *shrink, struct shrink_control *sc)
{
struct ext4_sb_info *sbi = container_of(shrink,
#define es_debug(fmt, ...) no_printk(fmt, ##__VA_ARGS__)
#endif
+/*
+ * With ES_AGGRESSIVE_TEST defined, the result of es caching will be
+ * checked with old map_block's result.
+ */
+#define ES_AGGRESSIVE_TEST__
+
/*
* These flags live in the high bits of extent_status.es_pblk
*/
EXTENT_STATUS_DELAYED | \
EXTENT_STATUS_HOLE)
+struct ext4_extent;
+
struct extent_status {
struct rb_node rb_node;
ext4_lblk_t es_lblk; /* first logical block extent covers */
struct extent_status *es);
extern int ext4_es_lookup_extent(struct inode *inode, ext4_lblk_t lblk,
struct extent_status *es);
+extern int ext4_es_zeroout(struct inode *inode, struct ext4_extent *ex);
static inline int ext4_es_is_written(struct extent_status *es)
{
}
struct orlov_stats {
+ __u64 free_clusters;
__u32 free_inodes;
- __u32 free_clusters;
__u32 used_dirs;
};
if (flex_size > 1) {
stats->free_inodes = atomic_read(&flex_group[g].free_inodes);
- stats->free_clusters = atomic_read(&flex_group[g].free_clusters);
+ stats->free_clusters = atomic64_read(&flex_group[g].free_clusters);
stats->used_dirs = atomic_read(&flex_group[g].used_dirs);
return;
}
blk = *i_data;
if (level > 0) {
ext4_lblk_t first2;
- bh = sb_bread(inode->i_sb, blk);
+ bh = sb_bread(inode->i_sb, le32_to_cpu(blk));
if (!bh) {
- EXT4_ERROR_INODE_BLOCK(inode, blk,
+ EXT4_ERROR_INODE_BLOCK(inode, le32_to_cpu(blk),
"Read failure");
return -EIO;
}
trace_ext4_evict_inode(inode);
- ext4_ioend_wait(inode);
-
if (inode->i_nlink) {
/*
* When journalling data dirty buffers are tracked only in the
* don't use page cache.
*/
if (ext4_should_journal_data(inode) &&
- (S_ISLNK(inode->i_mode) || S_ISREG(inode->i_mode))) {
+ (S_ISLNK(inode->i_mode) || S_ISREG(inode->i_mode)) &&
+ inode->i_ino != EXT4_JOURNAL_INO) {
journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
tid_t commit_tid = EXT4_I(inode)->i_datasync_tid;
filemap_write_and_wait(&inode->i_data);
}
truncate_inode_pages(&inode->i_data, 0);
+ ext4_ioend_shutdown(inode);
goto no_delete;
}
if (ext4_should_order_data(inode))
ext4_begin_ordered_truncate(inode, 0);
truncate_inode_pages(&inode->i_data, 0);
+ ext4_ioend_shutdown(inode);
if (is_bad_inode(inode))
goto no_delete;
return num;
}
+#ifdef ES_AGGRESSIVE_TEST
+static void ext4_map_blocks_es_recheck(handle_t *handle,
+ struct inode *inode,
+ struct ext4_map_blocks *es_map,
+ struct ext4_map_blocks *map,
+ int flags)
+{
+ int retval;
+
+ map->m_flags = 0;
+ /*
+ * There is a race window that the result is not the same.
+ * e.g. xfstests #223 when dioread_nolock enables. The reason
+ * is that we lookup a block mapping in extent status tree with
+ * out taking i_data_sem. So at the time the unwritten extent
+ * could be converted.
+ */
+ if (!(flags & EXT4_GET_BLOCKS_NO_LOCK))
+ down_read((&EXT4_I(inode)->i_data_sem));
+ if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
+ retval = ext4_ext_map_blocks(handle, inode, map, flags &
+ EXT4_GET_BLOCKS_KEEP_SIZE);
+ } else {
+ retval = ext4_ind_map_blocks(handle, inode, map, flags &
+ EXT4_GET_BLOCKS_KEEP_SIZE);
+ }
+ if (!(flags & EXT4_GET_BLOCKS_NO_LOCK))
+ up_read((&EXT4_I(inode)->i_data_sem));
+ /*
+ * Clear EXT4_MAP_FROM_CLUSTER and EXT4_MAP_BOUNDARY flag
+ * because it shouldn't be marked in es_map->m_flags.
+ */
+ map->m_flags &= ~(EXT4_MAP_FROM_CLUSTER | EXT4_MAP_BOUNDARY);
+
+ /*
+ * We don't check m_len because extent will be collpased in status
+ * tree. So the m_len might not equal.
+ */
+ if (es_map->m_lblk != map->m_lblk ||
+ es_map->m_flags != map->m_flags ||
+ es_map->m_pblk != map->m_pblk) {
+ printk("ES cache assertation failed for inode: %lu "
+ "es_cached ex [%d/%d/%llu/%x] != "
+ "found ex [%d/%d/%llu/%x] retval %d flags %x\n",
+ inode->i_ino, es_map->m_lblk, es_map->m_len,
+ es_map->m_pblk, es_map->m_flags, map->m_lblk,
+ map->m_len, map->m_pblk, map->m_flags,
+ retval, flags);
+ }
+}
+#endif /* ES_AGGRESSIVE_TEST */
+
/*
* The ext4_map_blocks() function tries to look up the requested blocks,
* and returns if the blocks are already mapped.
{
struct extent_status es;
int retval;
+#ifdef ES_AGGRESSIVE_TEST
+ struct ext4_map_blocks orig_map;
+
+ memcpy(&orig_map, map, sizeof(*map));
+#endif
map->m_flags = 0;
ext_debug("ext4_map_blocks(): inode %lu, flag %d, max_blocks %u,"
} else {
BUG_ON(1);
}
+#ifdef ES_AGGRESSIVE_TEST
+ ext4_map_blocks_es_recheck(handle, inode, map,
+ &orig_map, flags);
+#endif
goto found;
}
int ret;
unsigned long long status;
+#ifdef ES_AGGRESSIVE_TEST
+ if (retval != map->m_len) {
+ printk("ES len assertation failed for inode: %lu "
+ "retval %d != map->m_len %d "
+ "in %s (lookup)\n", inode->i_ino, retval,
+ map->m_len, __func__);
+ }
+#endif
+
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
if (!(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) &&
int ret;
unsigned long long status;
+#ifdef ES_AGGRESSIVE_TEST
+ if (retval != map->m_len) {
+ printk("ES len assertation failed for inode: %lu "
+ "retval %d != map->m_len %d "
+ "in %s (allocation)\n", inode->i_ino, retval,
+ map->m_len, __func__);
+ }
+#endif
+
+ /*
+ * If the extent has been zeroed out, we don't need to update
+ * extent status tree.
+ */
+ if ((flags & EXT4_GET_BLOCKS_PRE_IO) &&
+ ext4_es_lookup_extent(inode, map->m_lblk, &es)) {
+ if (ext4_es_is_written(&es))
+ goto has_zeroout;
+ }
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
if (!(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) &&
retval = ret;
}
+has_zeroout:
up_write((&EXT4_I(inode)->i_data_sem));
if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) {
int ret = check_block_validity(inode, map);
return ret ? ret : copied;
}
+/*
+ * Reserve a metadata for a single block located at lblock
+ */
+static int ext4_da_reserve_metadata(struct inode *inode, ext4_lblk_t lblock)
+{
+ int retries = 0;
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+ struct ext4_inode_info *ei = EXT4_I(inode);
+ unsigned int md_needed;
+ ext4_lblk_t save_last_lblock;
+ int save_len;
+
+ /*
+ * recalculate the amount of metadata blocks to reserve
+ * in order to allocate nrblocks
+ * worse case is one extent per block
+ */
+repeat:
+ spin_lock(&ei->i_block_reservation_lock);
+ /*
+ * ext4_calc_metadata_amount() has side effects, which we have
+ * to be prepared undo if we fail to claim space.
+ */
+ save_len = ei->i_da_metadata_calc_len;
+ save_last_lblock = ei->i_da_metadata_calc_last_lblock;
+ md_needed = EXT4_NUM_B2C(sbi,
+ ext4_calc_metadata_amount(inode, lblock));
+ trace_ext4_da_reserve_space(inode, md_needed);
+
+ /*
+ * We do still charge estimated metadata to the sb though;
+ * we cannot afford to run out of free blocks.
+ */
+ if (ext4_claim_free_clusters(sbi, md_needed, 0)) {
+ ei->i_da_metadata_calc_len = save_len;
+ ei->i_da_metadata_calc_last_lblock = save_last_lblock;
+ spin_unlock(&ei->i_block_reservation_lock);
+ if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
+ cond_resched();
+ goto repeat;
+ }
+ return -ENOSPC;
+ }
+ ei->i_reserved_meta_blocks += md_needed;
+ spin_unlock(&ei->i_block_reservation_lock);
+
+ return 0; /* success */
+}
+
/*
* Reserve a single cluster located at lblock
*/
ei->i_da_metadata_calc_last_lblock = save_last_lblock;
spin_unlock(&ei->i_block_reservation_lock);
if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
- yield();
+ cond_resched();
goto repeat;
}
dquot_release_reservation_block(inode, EXT4_C2B(sbi, 1));
struct extent_status es;
int retval;
sector_t invalid_block = ~((sector_t) 0xffff);
+#ifdef ES_AGGRESSIVE_TEST
+ struct ext4_map_blocks orig_map;
+
+ memcpy(&orig_map, map, sizeof(*map));
+#endif
if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
invalid_block = ~0;
else
BUG_ON(1);
+#ifdef ES_AGGRESSIVE_TEST
+ ext4_map_blocks_es_recheck(NULL, inode, map, &orig_map, 0);
+#endif
return retval;
}
* XXX: __block_prepare_write() unmaps passed block,
* is it OK?
*/
- /* If the block was allocated from previously allocated cluster,
- * then we dont need to reserve it again. */
+ /*
+ * If the block was allocated from previously allocated cluster,
+ * then we don't need to reserve it again. However we still need
+ * to reserve metadata for every block we're going to write.
+ */
if (!(map->m_flags & EXT4_MAP_FROM_CLUSTER)) {
ret = ext4_da_reserve_space(inode, iblock);
if (ret) {
retval = ret;
goto out_unlock;
}
+ } else {
+ ret = ext4_da_reserve_metadata(inode, iblock);
+ if (ret) {
+ /* not enough space to reserve */
+ retval = ret;
+ goto out_unlock;
+ }
}
ret = ext4_es_insert_extent(inode, map->m_lblk, map->m_len,
int ret;
unsigned long long status;
+#ifdef ES_AGGRESSIVE_TEST
+ if (retval != map->m_len) {
+ printk("ES len assertation failed for inode: %lu "
+ "retval %d != map->m_len %d "
+ "in %s (lookup)\n", inode->i_ino, retval,
+ map->m_len, __func__);
+ }
+#endif
+
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
ret = ext4_es_insert_extent(inode, map->m_lblk, map->m_len,
trace_ext4_releasepage(page);
- WARN_ON(PageChecked(page));
- if (!page_has_buffers(page))
+ /* Page has dirty journalled data -> cannot release */
+ if (PageChecked(page))
return 0;
if (journal)
return jbd2_journal_try_to_free_buffers(journal, page, wait);
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi,
ac->ac_b_ex.fe_group);
- atomic_sub(ac->ac_b_ex.fe_len,
- &sbi->s_flex_groups[flex_group].free_clusters);
+ atomic64_sub(ac->ac_b_ex.fe_len,
+ &sbi->s_flex_groups[flex_group].free_clusters);
}
err = ext4_handle_dirty_metadata(handle, NULL, bitmap_bh);
if (free < needed && busy) {
busy = 0;
ext4_unlock_group(sb, group);
- /*
- * Yield the CPU here so that we don't get soft lockup
- * in non preempt case.
- */
- yield();
+ cond_resched();
goto repeat;
}
ext4_claim_free_clusters(sbi, ar->len, ar->flags)) {
/* let others to free the space */
- yield();
+ cond_resched();
ar->len = ar->len >> 1;
}
if (!ar->len) {
struct buffer_head *bitmap_bh = NULL;
struct super_block *sb = inode->i_sb;
struct ext4_group_desc *gdp;
- unsigned long freed = 0;
unsigned int overflow;
ext4_grpblk_t bit;
struct buffer_head *gd_bh;
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi, block_group);
- atomic_add(count_clusters,
- &sbi->s_flex_groups[flex_group].free_clusters);
+ atomic64_add(count_clusters,
+ &sbi->s_flex_groups[flex_group].free_clusters);
}
ext4_mb_unload_buddy(&e4b);
- freed += count;
-
if (!(flags & EXT4_FREE_BLOCKS_NO_QUOT_UPDATE))
dquot_free_block(inode, EXT4_C2B(sbi, count_clusters));
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi, block_group);
- atomic_add(EXT4_NUM_B2C(sbi, blocks_freed),
- &sbi->s_flex_groups[flex_group].free_clusters);
+ atomic64_add(EXT4_NUM_B2C(sbi, blocks_freed),
+ &sbi->s_flex_groups[flex_group].free_clusters);
}
ext4_mb_unload_buddy(&e4b);
*/
static inline int
get_ext_path(struct inode *inode, ext4_lblk_t lblock,
- struct ext4_ext_path **path)
+ struct ext4_ext_path **orig_path)
{
int ret = 0;
+ struct ext4_ext_path *path;
- *path = ext4_ext_find_extent(inode, lblock, *path);
- if (IS_ERR(*path)) {
- ret = PTR_ERR(*path);
- *path = NULL;
- } else if ((*path)[ext_depth(inode)].p_ext == NULL)
+ path = ext4_ext_find_extent(inode, lblock, *orig_path);
+ if (IS_ERR(path))
+ ret = PTR_ERR(path);
+ else if (path[ext_depth(inode)].p_ext == NULL)
ret = -ENODATA;
+ else
+ *orig_path = path;
return ret;
}
{
struct ext4_ext_path *path = NULL;
struct ext4_extent *ext;
+ int ret = 0;
ext4_lblk_t last = from + count;
while (from < last) {
*err = get_ext_path(inode, from, &path);
if (*err)
- return 0;
+ goto out;
ext = path[ext_depth(inode)].p_ext;
- if (!ext) {
- ext4_ext_drop_refs(path);
- return 0;
- }
- if (uninit != ext4_ext_is_uninitialized(ext)) {
- ext4_ext_drop_refs(path);
- return 0;
- }
+ if (uninit != ext4_ext_is_uninitialized(ext))
+ goto out;
from += ext4_ext_get_actual_len(ext);
ext4_ext_drop_refs(path);
}
- return 1;
+ ret = 1;
+out:
+ if (path) {
+ ext4_ext_drop_refs(path);
+ kfree(path);
+ }
+ return ret;
}
/**
int replaced_count = 0;
int dext_alen;
+ *err = ext4_es_remove_extent(orig_inode, from, count);
+ if (*err)
+ goto out;
+
+ *err = ext4_es_remove_extent(donor_inode, from, count);
+ if (*err)
+ goto out;
+
/* Get the original extent for the block "orig_off" */
*err = get_ext_path(orig_inode, orig_off, &orig_path);
if (*err)
kmem_cache_destroy(io_page_cachep);
}
-void ext4_ioend_wait(struct inode *inode)
+/*
+ * This function is called by ext4_evict_inode() to make sure there is
+ * no more pending I/O completion work left to do.
+ */
+void ext4_ioend_shutdown(struct inode *inode)
{
wait_queue_head_t *wq = ext4_ioend_wq(inode);
wait_event(*wq, (atomic_read(&EXT4_I(inode)->i_ioend_count) == 0));
+ /*
+ * We need to make sure the work structure is finished being
+ * used before we let the inode get destroyed.
+ */
+ if (work_pending(&EXT4_I(inode)->i_unwritten_work))
+ cancel_work_sync(&EXT4_I(inode)->i_unwritten_work);
}
static void put_io_page(struct ext4_io_page *io_page)
sbi->s_log_groups_per_flex) {
ext4_group_t flex_group;
flex_group = ext4_flex_group(sbi, group_data[0].group);
- atomic_add(EXT4_NUM_B2C(sbi, free_blocks),
- &sbi->s_flex_groups[flex_group].free_clusters);
+ atomic64_add(EXT4_NUM_B2C(sbi, free_blocks),
+ &sbi->s_flex_groups[flex_group].free_clusters);
atomic_add(EXT4_INODES_PER_GROUP(sb) * flex_gd->count,
&sbi->s_flex_groups[flex_group].free_inodes);
}
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("ext2");
+MODULE_ALIAS("ext2");
#define IS_EXT2_SB(sb) ((sb)->s_bdev->bd_holder == &ext2_fs_type)
#else
#define IS_EXT2_SB(sb) (0)
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("ext3");
+MODULE_ALIAS("ext3");
#define IS_EXT3_SB(sb) ((sb)->s_bdev->bd_holder == &ext3_fs_type)
#else
#define IS_EXT3_SB(sb) (0)
flex_group = ext4_flex_group(sbi, i);
atomic_add(ext4_free_inodes_count(sb, gdp),
&sbi->s_flex_groups[flex_group].free_inodes);
- atomic_add(ext4_free_group_clusters(sb, gdp),
- &sbi->s_flex_groups[flex_group].free_clusters);
+ atomic64_add(ext4_free_group_clusters(sb, gdp),
+ &sbi->s_flex_groups[flex_group].free_clusters);
atomic_add(ext4_used_dirs_count(sb, gdp),
&sbi->s_flex_groups[flex_group].used_dirs);
}
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("vxfs"); /* makes mount -t vxfs autoload the module */
+MODULE_ALIAS("vxfs");
static int __init
vxfs_init(void)
cmd = F_SETLK;
fl->fl_type = F_UNLCK;
}
- if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags)))
+ if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) {
+ if (fl->fl_type == F_UNLCK)
+ posix_lock_file_wait(file, fl);
return -EIO;
+ }
if (IS_GETLK(cmd))
return dlm_posix_get(ls->ls_dlm, ip->i_no_addr, file, fl);
else if (fl->fl_type == F_UNLCK)
struct dlm_lksb ls_control_lksb; /* control_lock */
char ls_control_lvb[GDLM_LVB_SIZE]; /* control_lock lvb */
struct completion ls_sync_wait; /* {control,mounted}_{lock,unlock} */
+ char *ls_lvb_bits;
spinlock_t ls_recover_spin; /* protects following fields */
unsigned long ls_recover_flags; /* DFL_ */
static int all_jid_bits_clear(char *lvb)
{
- int i;
- for (i = JID_BITMAP_OFFSET; i < GDLM_LVB_SIZE; i++) {
- if (lvb[i])
- return 0;
- }
- return 1;
+ return !memchr_inv(lvb + JID_BITMAP_OFFSET, 0,
+ GDLM_LVB_SIZE - JID_BITMAP_OFFSET);
}
static void sync_wait_cb(void *arg)
{
struct gfs2_sbd *sdp = container_of(work, struct gfs2_sbd, sd_control_work.work);
struct lm_lockstruct *ls = &sdp->sd_lockstruct;
- char lvb_bits[GDLM_LVB_SIZE];
uint32_t block_gen, start_gen, lvb_gen, flags;
int recover_set = 0;
int write_lvb = 0;
return;
}
- control_lvb_read(ls, &lvb_gen, lvb_bits);
+ control_lvb_read(ls, &lvb_gen, ls->ls_lvb_bits);
spin_lock(&ls->ls_recover_spin);
if (block_gen != ls->ls_recover_block ||
ls->ls_recover_result[i] = 0;
- if (!test_bit_le(i, lvb_bits + JID_BITMAP_OFFSET))
+ if (!test_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET))
continue;
- __clear_bit_le(i, lvb_bits + JID_BITMAP_OFFSET);
+ __clear_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET);
write_lvb = 1;
}
}
continue;
if (ls->ls_recover_submit[i] < start_gen) {
ls->ls_recover_submit[i] = 0;
- __set_bit_le(i, lvb_bits + JID_BITMAP_OFFSET);
+ __set_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET);
}
}
/* even if there are no bits to set, we need to write the
spin_unlock(&ls->ls_recover_spin);
if (write_lvb) {
- control_lvb_write(ls, start_gen, lvb_bits);
+ control_lvb_write(ls, start_gen, ls->ls_lvb_bits);
flags = DLM_LKF_CONVERT | DLM_LKF_VALBLK;
} else {
flags = DLM_LKF_CONVERT;
*/
for (i = 0; i < recover_size; i++) {
- if (test_bit_le(i, lvb_bits + JID_BITMAP_OFFSET)) {
+ if (test_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET)) {
fs_info(sdp, "recover generation %u jid %d\n",
start_gen, i);
gfs2_recover_set(sdp, i);
static int control_mount(struct gfs2_sbd *sdp)
{
struct lm_lockstruct *ls = &sdp->sd_lockstruct;
- char lvb_bits[GDLM_LVB_SIZE];
uint32_t start_gen, block_gen, mount_gen, lvb_gen;
int mounted_mode;
int retries = 0;
* lvb_gen will be non-zero.
*/
- control_lvb_read(ls, &lvb_gen, lvb_bits);
+ control_lvb_read(ls, &lvb_gen, ls->ls_lvb_bits);
if (lvb_gen == 0xFFFFFFFF) {
/* special value to force mount attempts to fail */
* and all lvb bits to be clear (no pending journal recoveries.)
*/
- if (!all_jid_bits_clear(lvb_bits)) {
+ if (!all_jid_bits_clear(ls->ls_lvb_bits)) {
/* journals need recovery, wait until all are clear */
fs_info(sdp, "control_mount wait for journal recovery\n");
goto restart;
static int control_first_done(struct gfs2_sbd *sdp)
{
struct lm_lockstruct *ls = &sdp->sd_lockstruct;
- char lvb_bits[GDLM_LVB_SIZE];
uint32_t start_gen, block_gen;
int error;
memset(ls->ls_recover_result, 0, ls->ls_recover_size*sizeof(uint32_t));
spin_unlock(&ls->ls_recover_spin);
- memset(lvb_bits, 0, sizeof(lvb_bits));
- control_lvb_write(ls, start_gen, lvb_bits);
+ memset(ls->ls_lvb_bits, 0, GDLM_LVB_SIZE);
+ control_lvb_write(ls, start_gen, ls->ls_lvb_bits);
error = mounted_lock(sdp, DLM_LOCK_PR, DLM_LKF_CONVERT);
if (error)
uint32_t old_size, new_size;
int i, max_jid;
+ if (!ls->ls_lvb_bits) {
+ ls->ls_lvb_bits = kzalloc(GDLM_LVB_SIZE, GFP_NOFS);
+ if (!ls->ls_lvb_bits)
+ return -ENOMEM;
+ }
+
max_jid = 0;
for (i = 0; i < num_slots; i++) {
if (max_jid < slots[i].slot - 1)
static void free_recover_size(struct lm_lockstruct *ls)
{
+ kfree(ls->ls_lvb_bits);
kfree(ls->ls_recover_submit);
kfree(ls->ls_recover_result);
ls->ls_recover_submit = NULL;
ls->ls_recover_size = 0;
ls->ls_recover_submit = NULL;
ls->ls_recover_result = NULL;
+ ls->ls_lvb_bits = NULL;
error = set_recover_size(sdp, NULL, 0);
if (error)
RB_CLEAR_NODE(&ip->i_res->rs_node);
out:
up_write(&ip->i_rw_mutex);
- return 0;
+ return error;
}
static void dump_rs(struct seq_file *seq, const struct gfs2_blkreserv *rs)
const struct gfs2_bitmap *bi, unsigned minlen, u64 *ptrimmed)
{
struct super_block *sb = sdp->sd_vfs;
- struct block_device *bdev = sb->s_bdev;
- const unsigned int sects_per_blk = sdp->sd_sb.sb_bsize /
- bdev_logical_block_size(sb->s_bdev);
u64 blk;
sector_t start = 0;
- sector_t nr_sects = 0;
+ sector_t nr_blks = 0;
int rv;
unsigned int x;
u32 trimmed = 0;
if (diff == 0)
continue;
blk = offset + ((bi->bi_start + x) * GFS2_NBBY);
- blk *= sects_per_blk; /* convert to sectors */
while(diff) {
if (diff & 1) {
- if (nr_sects == 0)
+ if (nr_blks == 0)
goto start_new_extent;
- if ((start + nr_sects) != blk) {
- if (nr_sects >= minlen) {
- rv = blkdev_issue_discard(bdev,
- start, nr_sects,
+ if ((start + nr_blks) != blk) {
+ if (nr_blks >= minlen) {
+ rv = sb_issue_discard(sb,
+ start, nr_blks,
GFP_NOFS, 0);
if (rv)
goto fail;
- trimmed += nr_sects;
+ trimmed += nr_blks;
}
- nr_sects = 0;
+ nr_blks = 0;
start_new_extent:
start = blk;
}
- nr_sects += sects_per_blk;
+ nr_blks++;
}
diff >>= 2;
- blk += sects_per_blk;
+ blk++;
}
}
- if (nr_sects >= minlen) {
- rv = blkdev_issue_discard(bdev, start, nr_sects, GFP_NOFS, 0);
+ if (nr_blks >= minlen) {
+ rv = sb_issue_discard(sb, start, nr_blks, GFP_NOFS, 0);
if (rv)
goto fail;
- trimmed += nr_sects;
+ trimmed += nr_blks;
}
if (ptrimmed)
*ptrimmed = trimmed;
return err;
if ((attr->ia_valid & ATTR_SIZE) &&
- attr->ia_size != i_size_read(inode)) {
- int error;
-
- error = inode_newsize_ok(inode, attr->ia_size);
- if (error)
- return error;
-
+ attr->ia_size != i_size_read(inode))
truncate_setsize(inode, attr->ia_size);
- }
setattr_copy(inode, attr);
mark_inode_dirty(inode);
.kill_sb = hostfs_kill_sb,
.fs_flags = 0,
};
+MODULE_ALIAS_FS("hostfs");
static int __init init_hostfs(void)
{
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
+MODULE_ALIAS_FS("hpfs");
static int __init init_hpfs_fs(void)
{
* dcache.c
*/
extern struct dentry *__d_alloc(struct super_block *, const struct qstr *);
+
+/*
+ * read_write.c
+ */
+extern ssize_t __kernel_write(struct file *, const char *, size_t, loff_t *);
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("iso9660");
+MODULE_ALIAS("iso9660");
static int __init init_iso9660_fs(void)
{
void jbd2_journal_set_triggers(struct buffer_head *bh,
struct jbd2_buffer_trigger_type *type)
{
- struct journal_head *jh = bh2jh(bh);
+ struct journal_head *jh = jbd2_journal_grab_journal_head(bh);
+ if (WARN_ON(!jh))
+ return;
jh->b_triggers = type;
+ jbd2_journal_put_journal_head(jh);
}
void jbd2_buffer_frozen_trigger(struct journal_head *jh, void *mapped_data,
{
transaction_t *transaction = handle->h_transaction;
journal_t *journal = transaction->t_journal;
- struct journal_head *jh = bh2jh(bh);
+ struct journal_head *jh;
int ret = 0;
- jbd_debug(5, "journal_head %p\n", jh);
- JBUFFER_TRACE(jh, "entry");
if (is_handle_aborted(handle))
goto out;
- if (!buffer_jbd(bh)) {
+ jh = jbd2_journal_grab_journal_head(bh);
+ if (!jh) {
ret = -EUCLEAN;
goto out;
}
+ jbd_debug(5, "journal_head %p\n", jh);
+ JBUFFER_TRACE(jh, "entry");
jbd_lock_bh_state(bh);
spin_unlock(&journal->j_list_lock);
out_unlock_bh:
jbd_unlock_bh_state(bh);
+ jbd2_journal_put_journal_head(jh);
out:
JBUFFER_TRACE(jh, "exit");
WARN_ON(ret); /* All errors are bugs, so dump the stack */
}
mnt->mnt.mnt_flags = old->mnt.mnt_flags & ~MNT_WRITE_HOLD;
+ /* Don't allow unprivileged users to change mount flags */
+ if ((flag & CL_UNPRIVILEGED) && (mnt->mnt.mnt_flags & MNT_READONLY))
+ mnt->mnt.mnt_flags |= MNT_LOCK_READONLY;
+
atomic_inc(&sb->s_active);
mnt->mnt.mnt_sb = sb;
mnt->mnt.mnt_root = dget(root);
if (readonly_request == __mnt_is_readonly(mnt))
return 0;
+ if (mnt->mnt_flags & MNT_LOCK_READONLY)
+ return -EPERM;
+
if (readonly_request)
error = mnt_make_readonly(real_mount(mnt));
else
/* First pass: copy the tree topology */
copy_flags = CL_COPY_ALL | CL_EXPIRE;
if (user_ns != mnt_ns->user_ns)
- copy_flags |= CL_SHARED_TO_SLAVE;
+ copy_flags |= CL_SHARED_TO_SLAVE | CL_UNPRIVILEGED;
new = copy_tree(old, old->mnt.mnt_root, copy_flags);
if (IS_ERR(new)) {
up_write(&namespace_sem);
return check_mnt(real_mount(mnt));
}
+bool current_chrooted(void)
+{
+ /* Does the current process have a non-standard root */
+ struct path ns_root;
+ struct path fs_root;
+ bool chrooted;
+
+ /* Find the namespace root */
+ ns_root.mnt = ¤t->nsproxy->mnt_ns->root->mnt;
+ ns_root.dentry = ns_root.mnt->mnt_root;
+ path_get(&ns_root);
+ while (d_mountpoint(ns_root.dentry) && follow_down_one(&ns_root))
+ ;
+
+ get_fs_root(current->fs, &fs_root);
+
+ chrooted = !path_equal(&fs_root, &ns_root);
+
+ path_put(&fs_root);
+ path_put(&ns_root);
+
+ return chrooted;
+}
+
+void update_mnt_policy(struct user_namespace *userns)
+{
+ struct mnt_namespace *ns = current->nsproxy->mnt_ns;
+ struct mount *mnt;
+
+ down_read(&namespace_sem);
+ list_for_each_entry(mnt, &ns->list, mnt_list) {
+ switch (mnt->mnt.mnt_sb->s_magic) {
+ case SYSFS_MAGIC:
+ userns->may_mount_sysfs = true;
+ break;
+ case PROC_SUPER_MAGIC:
+ userns->may_mount_proc = true;
+ break;
+ }
+ if (userns->may_mount_sysfs && userns->may_mount_proc)
+ break;
+ }
+ up_read(&namespace_sem);
+}
+
static void *mntns_get(struct task_struct *task)
{
struct mnt_namespace *ns = NULL;
bl_pipe_msg.bl_wq = &nn->bl_wq;
memset(msg, 0, sizeof(*msg));
- msg->data = kzalloc(1 + sizeof(bl_umount_request), GFP_NOFS);
+ msg->len = sizeof(bl_msg) + bl_msg.totallen;
+ msg->data = kzalloc(msg->len, GFP_NOFS);
if (!msg->data)
goto out;
memcpy(msg->data, &bl_msg, sizeof(bl_msg));
dataptr = (uint8_t *) msg->data;
memcpy(&dataptr[sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request));
- msg->len = sizeof(bl_msg) + bl_msg.totallen;
add_wait_queue(&nn->bl_wq, &wq);
if (rpc_queue_upcall(nn->bl_device_pipe, msg) < 0) {
return ret;
}
-static int nfs_idmap_instantiate(struct key *key, struct key *authkey, char *data)
+static int nfs_idmap_instantiate(struct key *key, struct key *authkey, char *data, size_t datalen)
{
- return key_instantiate_and_link(key, data, strlen(data) + 1,
+ return key_instantiate_and_link(key, data, datalen,
id_resolver_cache->thread_keyring,
authkey);
}
struct key *key, struct key *authkey)
{
char id_str[NFS_UINT_MAXLEN];
+ size_t len;
int ret = -ENOKEY;
/* ret = -ENOKEY */
case IDMAP_CONV_NAMETOID:
if (strcmp(upcall->im_name, im->im_name) != 0)
break;
- sprintf(id_str, "%d", im->im_id);
- ret = nfs_idmap_instantiate(key, authkey, id_str);
+ /* Note: here we store the NUL terminator too */
+ len = sprintf(id_str, "%d", im->im_id) + 1;
+ ret = nfs_idmap_instantiate(key, authkey, id_str, len);
break;
case IDMAP_CONV_IDTONAME:
if (upcall->im_id != im->im_id)
break;
- ret = nfs_idmap_instantiate(key, authkey, im->im_name);
+ len = strlen(im->im_name);
+ ret = nfs_idmap_instantiate(key, authkey, im->im_name, len);
break;
default:
ret = -EINVAL;
{
if (!test_and_clear_bit(NFS_LAYOUT_RETURN, &lo->plh_flags))
return;
- clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags);
pnfs_return_layout(inode);
}
int status;
if (pnfs_ld_layoutret_on_setattr(inode))
- pnfs_return_layout(inode);
+ pnfs_commit_and_return_layout(inode);
nfs_fattr_init(fattr);
static void nfs4_layoutcommit_release(void *calldata)
{
struct nfs4_layoutcommit_data *data = calldata;
- struct pnfs_layout_segment *lseg, *tmp;
- unsigned long *bitlock = &NFS_I(data->args.inode)->flags;
pnfs_cleanup_layoutcommit(data);
- /* Matched by references in pnfs_set_layoutcommit */
- list_for_each_entry_safe(lseg, tmp, &data->lseg_list, pls_lc_list) {
- list_del_init(&lseg->pls_lc_list);
- if (test_and_clear_bit(NFS_LSEG_LAYOUTCOMMIT,
- &lseg->pls_flags))
- pnfs_put_lseg(lseg);
- }
-
- clear_bit_unlock(NFS_INO_LAYOUTCOMMITTING, bitlock);
- smp_mb__after_clear_bit();
- wake_up_bit(bitlock, NFS_INO_LAYOUTCOMMITTING);
-
put_rpccred(data->cred);
kfree(data);
}
lo_seg_intersecting(lseg_range, recall_range);
}
+static bool pnfs_lseg_dec_and_remove_zero(struct pnfs_layout_segment *lseg,
+ struct list_head *tmp_list)
+{
+ if (!atomic_dec_and_test(&lseg->pls_refcount))
+ return false;
+ pnfs_layout_remove_lseg(lseg->pls_layout, lseg);
+ list_add(&lseg->pls_list, tmp_list);
+ return true;
+}
+
/* Returns 1 if lseg is removed from list, 0 otherwise */
static int mark_lseg_invalid(struct pnfs_layout_segment *lseg,
struct list_head *tmp_list)
*/
dprintk("%s: lseg %p ref %d\n", __func__, lseg,
atomic_read(&lseg->pls_refcount));
- if (atomic_dec_and_test(&lseg->pls_refcount)) {
- pnfs_layout_remove_lseg(lseg->pls_layout, lseg);
- list_add(&lseg->pls_list, tmp_list);
+ if (pnfs_lseg_dec_and_remove_zero(lseg, tmp_list))
rv = 1;
- }
}
return rv;
}
return lseg;
}
+static void pnfs_clear_layoutcommit(struct inode *inode,
+ struct list_head *head)
+{
+ struct nfs_inode *nfsi = NFS_I(inode);
+ struct pnfs_layout_segment *lseg, *tmp;
+
+ if (!test_and_clear_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags))
+ return;
+ list_for_each_entry_safe(lseg, tmp, &nfsi->layout->plh_segs, pls_list) {
+ if (!test_and_clear_bit(NFS_LSEG_LAYOUTCOMMIT, &lseg->pls_flags))
+ continue;
+ pnfs_lseg_dec_and_remove_zero(lseg, head);
+ }
+}
+
/*
* Initiates a LAYOUTRETURN(FILE), and removes the pnfs_layout_hdr
* when the layout segment list is empty.
/* Reference matched in nfs4_layoutreturn_release */
pnfs_get_layout_hdr(lo);
empty = list_empty(&lo->plh_segs);
+ pnfs_clear_layoutcommit(ino, &tmp_list);
pnfs_mark_matching_lsegs_invalid(lo, &tmp_list, NULL);
/* Don't send a LAYOUTRETURN if list was initially empty */
if (empty) {
spin_unlock(&ino->i_lock);
pnfs_free_lseg_list(&tmp_list);
- WARN_ON(test_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags));
-
lrp = kzalloc(sizeof(*lrp), GFP_KERNEL);
if (unlikely(lrp == NULL)) {
status = -ENOMEM;
}
EXPORT_SYMBOL_GPL(_pnfs_return_layout);
+int
+pnfs_commit_and_return_layout(struct inode *inode)
+{
+ struct pnfs_layout_hdr *lo;
+ int ret;
+
+ spin_lock(&inode->i_lock);
+ lo = NFS_I(inode)->layout;
+ if (lo == NULL) {
+ spin_unlock(&inode->i_lock);
+ return 0;
+ }
+ pnfs_get_layout_hdr(lo);
+ /* Block new layoutgets and read/write to ds */
+ lo->plh_block_lgets++;
+ spin_unlock(&inode->i_lock);
+ filemap_fdatawait(inode->i_mapping);
+ ret = pnfs_layoutcommit_inode(inode, true);
+ if (ret == 0)
+ ret = _pnfs_return_layout(inode);
+ spin_lock(&inode->i_lock);
+ lo->plh_block_lgets--;
+ spin_unlock(&inode->i_lock);
+ pnfs_put_layout_hdr(lo);
+ return ret;
+}
+
bool pnfs_roc(struct inode *ino)
{
struct pnfs_layout_hdr *lo;
dprintk("pnfs write error = %d\n", hdr->pnfs_error);
if (NFS_SERVER(hdr->inode)->pnfs_curr_ld->flags &
PNFS_LAYOUTRET_ON_ERROR) {
- clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(hdr->inode)->flags);
pnfs_return_layout(hdr->inode);
}
if (!test_and_set_bit(NFS_IOHDR_REDO, &hdr->flags))
dprintk("pnfs read error = %d\n", hdr->pnfs_error);
if (NFS_SERVER(hdr->inode)->pnfs_curr_ld->flags &
PNFS_LAYOUTRET_ON_ERROR) {
- clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(hdr->inode)->flags);
pnfs_return_layout(hdr->inode);
}
if (!test_and_set_bit(NFS_IOHDR_REDO, &hdr->flags))
list_for_each_entry(lseg, &NFS_I(inode)->layout->plh_segs, pls_list) {
if (lseg->pls_range.iomode == IOMODE_RW &&
- test_bit(NFS_LSEG_LAYOUTCOMMIT, &lseg->pls_flags))
+ test_and_clear_bit(NFS_LSEG_LAYOUTCOMMIT, &lseg->pls_flags))
list_add(&lseg->pls_lc_list, listp);
}
}
+static void pnfs_list_write_lseg_done(struct inode *inode, struct list_head *listp)
+{
+ struct pnfs_layout_segment *lseg, *tmp;
+ unsigned long *bitlock = &NFS_I(inode)->flags;
+
+ /* Matched by references in pnfs_set_layoutcommit */
+ list_for_each_entry_safe(lseg, tmp, listp, pls_lc_list) {
+ list_del_init(&lseg->pls_lc_list);
+ pnfs_put_lseg(lseg);
+ }
+
+ clear_bit_unlock(NFS_INO_LAYOUTCOMMITTING, bitlock);
+ smp_mb__after_clear_bit();
+ wake_up_bit(bitlock, NFS_INO_LAYOUTCOMMITTING);
+}
+
void pnfs_set_lo_fail(struct pnfs_layout_segment *lseg)
{
pnfs_layout_io_set_failed(lseg->pls_layout, lseg->pls_range.iomode);
if (nfss->pnfs_curr_ld->cleanup_layoutcommit)
nfss->pnfs_curr_ld->cleanup_layoutcommit(data);
+ pnfs_list_write_lseg_done(data->args.inode, &data->lseg_list);
}
/*
void pnfs_cleanup_layoutcommit(struct nfs4_layoutcommit_data *data);
int pnfs_layoutcommit_inode(struct inode *inode, bool sync);
int _pnfs_return_layout(struct inode *);
+int pnfs_commit_and_return_layout(struct inode *);
void pnfs_ld_write_done(struct nfs_write_data *);
void pnfs_ld_read_done(struct nfs_read_data *);
struct pnfs_layout_segment *pnfs_update_layout(struct inode *ino,
return 0;
}
+static inline int pnfs_commit_and_return_layout(struct inode *inode)
+{
+ return 0;
+}
+
static inline bool
pnfs_ld_layoutret_on_setattr(struct inode *inode)
{
.fs_flags = FS_RENAME_DOES_D_MOVE|FS_BINARY_MOUNTDATA,
};
MODULE_ALIAS_FS("nfs4");
+MODULE_ALIAS("nfs4");
EXPORT_SYMBOL_GPL(nfs4_fs_type);
static int __init register_nfs4_fs(void)
__nfs4_file_put_access(fp, oflag);
}
-static inline int get_new_stid(struct nfs4_stid *stid)
-{
- static int min_stateid = 0;
- struct idr *stateids = &stid->sc_client->cl_stateids;
- int new_stid;
- int error;
-
- error = idr_get_new_above(stateids, stid, min_stateid, &new_stid);
- /*
- * Note: the necessary preallocation was done in
- * nfs4_alloc_stateid(). The idr code caps the number of
- * preallocations that can exist at a time, but the state lock
- * prevents anyone from using ours before we get here:
- */
- WARN_ON_ONCE(error);
- /*
- * It shouldn't be a problem to reuse an opaque stateid value.
- * I don't think it is for 4.1. But with 4.0 I worry that, for
- * example, a stray write retransmission could be accepted by
- * the server when it should have been rejected. Therefore,
- * adopt a trick from the sctp code to attempt to maximize the
- * amount of time until an id is reused, by ensuring they always
- * "increase" (mod INT_MAX):
- */
-
- min_stateid = new_stid+1;
- if (min_stateid == INT_MAX)
- min_stateid = 0;
- return new_stid;
-}
-
static struct nfs4_stid *nfs4_alloc_stid(struct nfs4_client *cl, struct
kmem_cache *slab)
{
if (!stid)
return NULL;
- if (!idr_pre_get(stateids, GFP_KERNEL))
- goto out_free;
- if (idr_get_new_above(stateids, stid, min_stateid, &new_id))
+ new_id = idr_alloc(stateids, stid, min_stateid, 0, GFP_KERNEL);
+ if (new_id < 0)
goto out_free;
stid->sc_client = cl;
stid->sc_type = 0;
iattr->ia_valid |= ATTR_SIZE;
}
if (bmval[0] & FATTR4_WORD0_ACL) {
- int nace;
+ u32 nace;
struct nfs4_ace *ace;
READ_BUF(4); len += 4;
{
if (rp->c_type == RC_REPLBUFF)
kfree(rp->c_replvec.iov_base);
- hlist_del(&rp->c_hash);
+ if (!hlist_unhashed(&rp->c_hash))
+ hlist_del(&rp->c_hash);
list_del(&rp->c_lru);
--num_drc_entries;
kmem_cache_free(drc_slab, rp);
int nfsd_reply_cache_init(void)
{
+ INIT_LIST_HEAD(&lru_head);
+ max_drc_entries = nfsd_cache_size_limit();
+ num_drc_entries = 0;
+
register_shrinker(&nfsd_reply_cache_shrinker);
drc_slab = kmem_cache_create("nfsd_drc", sizeof(struct svc_cacherep),
0, 0, NULL);
if (!cache_hash)
goto out_nomem;
- INIT_LIST_HEAD(&lru_head);
- max_drc_entries = nfsd_cache_size_limit();
- num_drc_entries = 0;
-
return 0;
out_nomem:
printk(KERN_ERR "nfsd: failed to allocate reply cache\n");
int host_err;
int stable = *stablep;
int use_wgather;
+ loff_t pos = offset;
dentry = file->f_path.dentry;
inode = dentry->d_inode;
/* Write the data. */
oldfs = get_fs(); set_fs(KERNEL_DS);
- host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &offset);
+ host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &pos);
set_fs(oldfs);
if (host_err < 0)
goto out_nfserr;
{
int ret = -ENOENT;
+ if (!(filp->f_mode & (FMODE_READ|FMODE_WRITE)))
+ return -EINVAL;
+
mutex_lock(&inode->i_mutex);
if (inode->i_pipe) {
#include <linux/mnt_namespace.h>
#include <linux/mount.h>
#include <linux/fs.h>
+#include <linux/nsproxy.h>
#include "internal.h"
#include "pnode.h"
int propagate_mnt(struct mount *dest_mnt, struct dentry *dest_dentry,
struct mount *source_mnt, struct list_head *tree_list)
{
+ struct user_namespace *user_ns = current->nsproxy->mnt_ns->user_ns;
struct mount *m, *child;
int ret = 0;
struct mount *prev_dest_mnt = dest_mnt;
source = get_source(m, prev_dest_mnt, prev_src_mnt, &type);
+ /* Notice when we are propagating across user namespaces */
+ if (m->mnt_ns->user_ns != user_ns)
+ type |= CL_UNPRIVILEGED;
+
child = copy_tree(source, source->mnt.mnt_root, type);
if (IS_ERR(child)) {
ret = PTR_ERR(child);
#define CL_MAKE_SHARED 0x08
#define CL_PRIVATE 0x10
#define CL_SHARED_TO_SLAVE 0x20
+#define CL_UNPRIVILEGED 0x40
static inline void set_mnt_shared(struct mount *mnt)
{
struct inode *proc_get_inode(struct super_block *sb, struct proc_dir_entry *de)
{
- struct inode *inode = iget_locked(sb, de->low_ino);
+ struct inode *inode = new_inode_pseudo(sb);
- if (inode && (inode->i_state & I_NEW)) {
+ if (inode) {
+ inode->i_ino = de->low_ino;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
PROC_I(inode)->pde = de;
inode->i_fop = de->proc_fops;
}
}
- unlock_new_inode(inode);
} else
pde_put(de);
return inode;
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/bitops.h>
+#include <linux/user_namespace.h>
#include <linux/mount.h>
#include <linux/pid_namespace.h>
#include <linux/parser.h>
} else {
ns = task_active_pid_ns(current);
options = data;
+
+ if (!current_user_ns()->may_mount_proc)
+ return ERR_PTR(-EPERM);
}
sb = sget(fs_type, proc_test_super, proc_set_super, flags, ns);
* did a write before quota was turned on
*/
rsv = inode_get_rsv_space(inode);
- if (unlikely(rsv))
+ if (unlikely(rsv)) {
+ spin_lock(&dq_data_lock);
dquot_resv_space(inode->i_dquot[cnt], rsv);
+ spin_unlock(&dq_data_lock);
+ }
}
}
out_err:
#include <linux/splice.h>
#include <linux/compat.h>
#include "read_write.h"
+#include "internal.h"
#include <asm/uaccess.h>
#include <asm/unistd.h>
EXPORT_SYMBOL(do_sync_write);
+ssize_t __kernel_write(struct file *file, const char *buf, size_t count, loff_t *pos)
+{
+ mm_segment_t old_fs;
+ const char __user *p;
+ ssize_t ret;
+
+ if (!file->f_op || (!file->f_op->write && !file->f_op->aio_write))
+ return -EINVAL;
+
+ old_fs = get_fs();
+ set_fs(get_ds());
+ p = (__force const char __user *)buf;
+ if (count > MAX_RW_COUNT)
+ count = MAX_RW_COUNT;
+ if (file->f_op->write)
+ ret = file->f_op->write(file, p, count, pos);
+ else
+ ret = do_sync_write(file, p, count, pos);
+ set_fs(old_fs);
+ if (ret > 0) {
+ fsnotify_modify(file);
+ add_wchar(current, ret);
+ }
+ inc_syscw(current);
+ return ret;
+}
+
ssize_t vfs_write(struct file *file, const char __user *buf, size_t count, loff_t *pos)
{
ssize_t ret;
"on filesystem root.");
return 0;
}
- qf_names[qtype] =
- kmalloc(strlen(arg) + 1, GFP_KERNEL);
+ qf_names[qtype] = kstrdup(arg, GFP_KERNEL);
if (!qf_names[qtype]) {
reiserfs_warning(s, "reiserfs-2502",
"not enough memory "
"quotafile name.");
return 0;
}
- strcpy(qf_names[qtype], arg);
if (qtype == USRQUOTA)
*mount_options |= 1 << REISERFS_USRQUOTA;
else
if (dbuf->count == ARRAY_SIZE(dbuf->dentries))
return -ENOSPC;
- if (name[0] == '.' && (name[1] == '\0' ||
- (name[1] == '.' && name[2] == '\0')))
+ if (name[0] == '.' && (namelen < 2 ||
+ (namelen == 2 && name[1] == '.')))
return 0;
dentry = lookup_one_len(name, dbuf->xadir, namelen);
#include <linux/security.h>
#include <linux/gfp.h>
#include <linux/socket.h>
+#include "internal.h"
/*
* Attempt to steal a page from a pipe buffer. This should perhaps go into
{
int ret;
void *data;
+ loff_t tmp = sd->pos;
data = buf->ops->map(pipe, buf, 0);
- ret = kernel_write(sd->u.file, data + buf->offset, sd->len, sd->pos);
+ ret = __kernel_write(sd->u.file, data + buf->offset, sd->len, &tmp);
buf->ops->unmap(pipe, buf, data);
return ret;
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV
};
+MODULE_ALIAS_FS("squashfs");
static const struct super_operations squashfs_super_ops = {
.alloc_inode = squashfs_alloc_inode,
ino = parent_sd->s_ino;
if (filldir(dirent, ".", 1, filp->f_pos, ino, DT_DIR) == 0)
filp->f_pos++;
+ else
+ return 0;
}
if (filp->f_pos == 1) {
if (parent_sd->s_parent)
ino = parent_sd->s_ino;
if (filldir(dirent, "..", 2, filp->f_pos, ino, DT_DIR) == 0)
filp->f_pos++;
+ else
+ return 0;
}
mutex_lock(&sysfs_mutex);
for (pos = sysfs_dir_pos(ns, parent_sd, filp->f_pos, pos);
return 0;
}
+static loff_t sysfs_dir_llseek(struct file *file, loff_t offset, int whence)
+{
+ struct inode *inode = file_inode(file);
+ loff_t ret;
+
+ mutex_lock(&inode->i_mutex);
+ ret = generic_file_llseek(file, offset, whence);
+ mutex_unlock(&inode->i_mutex);
+
+ return ret;
+}
const struct file_operations sysfs_dir_operations = {
.read = generic_read_dir,
.readdir = sysfs_readdir,
.release = sysfs_dir_release,
- .llseek = generic_file_llseek,
+ .llseek = sysfs_dir_llseek,
};
#include <linux/module.h>
#include <linux/magic.h>
#include <linux/slab.h>
+#include <linux/user_namespace.h>
#include "sysfs.h"
struct super_block *sb;
int error;
+ if (!(flags & MS_KERNMOUNT) && !current_user_ns()->may_mount_sysfs)
+ return ERR_PTR(-EPERM);
+
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return ERR_PTR(-ENOMEM);
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("v7");
+MODULE_ALIAS("v7");
static int __init init_sysv_fs(void)
{
c->remounting_rw = 1;
c->ro_mount = 0;
+ if (c->space_fixup) {
+ err = ubifs_fixup_free_space(c);
+ if (err)
+ return err;
+ }
+
err = check_free_space(c);
if (err)
goto out;
err = dbg_check_space_info(c);
}
- if (c->space_fixup) {
- err = ubifs_fixup_free_space(c);
- if (err)
- goto out;
- }
-
mutex_unlock(&c->umount_mutex);
return err;
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
+MODULE_ALIAS_FS("udf");
static struct kmem_cache *udf_inode_cachep;
int size;
int i;
+ /*
+ * Make sure we capture only current IO errors rather than stale errors
+ * left over from previous use of the buffer (e.g. failed readahead).
+ */
+ bp->b_error = 0;
+
if (bp->b_flags & XBF_WRITE) {
if (bp->b_flags & XBF_SYNCIO)
rw = WRITE_SYNC;
* rather than falling short due to things like stripe unit/width alignment of
* real extents.
*/
-STATIC int
+STATIC xfs_fsblock_t
xfs_iomap_eof_prealloc_initial_size(
struct xfs_mount *mp,
struct xfs_inode *ip,
* have a large file on a small filesystem and the above
* lowspace thresholds are smaller than MAXEXTLEN.
*/
- while (alloc_blocks >= freesp)
+ while (alloc_blocks && alloc_blocks >= freesp)
alloc_blocks >>= 4;
}
if a _PPC object exists, rmmod is disallowed then */
int acpi_processor_notify_smm(struct module *calling_module);
+/* parsing the _P* objects. */
+extern int acpi_processor_get_performance_info(struct acpi_processor *pr);
+
/* for communication between multiple parts of the processor kernel module */
DECLARE_PER_CPU(struct acpi_processor *, processors);
extern struct acpi_processor_errata errata;
#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v)))
#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
- (unsigned long)(n), sizeof(*(ptr))))
-
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
static inline int __atomic_add_unless(atomic_t *v, int a, int u)
{
int c, old;
*/
#include <asm-generic/cmpxchg-local.h>
+#ifndef cmpxchg_local
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+ (unsigned long)(n), sizeof(*(ptr))))
+#endif
+
+#ifndef cmpxchg64_local
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
#define cmpxchg(ptr, o, n) cmpxchg_local((ptr), (o), (n))
#define cmpxchg64(ptr, o, n) cmpxchg64_local((ptr), (o), (n))
{0x1002, 0x9908, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9909, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x990A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
- {0x1002, 0x990F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9910, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9913, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9917, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9992, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9993, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9994, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9995, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9996, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9997, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9998, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9999, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x999A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x999B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x99A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x99A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x99A4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
}, \
.reg = _reg, \
.shift = _shift, \
- .width = _width, \
+ .mask = BIT(_width) - 1, \
.flags = _mux_flags, \
.lock = _lock, \
}; \
* undo any work done in the @prepare callback. Called with
* prepare_lock held.
*
+ * @is_prepared: Queries the hardware to determine if the clock is prepared.
+ * This function is allowed to sleep. Optional, if this op is not
+ * set then the prepare count will be used.
+ *
+ * @unprepare_unused: Unprepare the clock atomically. Only called from
+ * clk_disable_unused for prepare clocks with special needs.
+ * Called with prepare mutex held. This function may sleep.
+ *
* @enable: Enable the clock atomically. This must not return until the
* clock is generating a valid clock signal, usable by consumer
* devices. Called with enable_lock held. This function must not
struct clk_ops {
int (*prepare)(struct clk_hw *hw);
void (*unprepare)(struct clk_hw *hw);
+ int (*is_prepared)(struct clk_hw *hw);
+ void (*unprepare_unused)(struct clk_hw *hw);
int (*enable)(struct clk_hw *hw);
void (*disable)(struct clk_hw *hw);
int (*is_enabled)(struct clk_hw *hw);
struct clk_mux {
struct clk_hw hw;
void __iomem *reg;
+ u32 *table;
+ u32 mask;
u8 shift;
- u8 width;
u8 flags;
spinlock_t *lock;
};
#define CLK_MUX_INDEX_BIT BIT(1)
extern const struct clk_ops clk_mux_ops;
+
struct clk *clk_register_mux(struct device *dev, const char *name,
const char **parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_mux_flags, spinlock_t *lock);
+struct clk *clk_register_mux_table(struct device *dev, const char *name,
+ const char **parent_names, u8 num_parents, unsigned long flags,
+ void __iomem *reg, u8 shift, u32 mask,
+ u8 clk_mux_flags, u32 *table, spinlock_t *lock);
+
/**
* struct clk_fixed_factor - fixed multiplier and divider clock
*
const char *parent_name, unsigned long flags,
unsigned int mult, unsigned int div);
+/***
+ * struct clk_composite - aggregate clock of mux, divider and gate clocks
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @mux_hw: handle between composite and hardware-specifix mux clock
+ * @div_hw: handle between composite and hardware-specifix divider clock
+ * @gate_hw: handle between composite and hardware-specifix gate clock
+ * @mux_ops: clock ops for mux
+ * @div_ops: clock ops for divider
+ * @gate_ops: clock ops for gate
+ */
+struct clk_composite {
+ struct clk_hw hw;
+ struct clk_ops ops;
+
+ struct clk_hw *mux_hw;
+ struct clk_hw *div_hw;
+ struct clk_hw *gate_hw;
+
+ const struct clk_ops *mux_ops;
+ const struct clk_ops *div_ops;
+ const struct clk_ops *gate_ops;
+};
+
+struct clk *clk_register_composite(struct device *dev, const char *name,
+ const char **parent_names, int num_parents,
+ struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
+ struct clk_hw *div_hw, const struct clk_ops *div_ops,
+ struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
+ unsigned long flags);
+
/**
* clk_register - allocate a new clock, register it and return an opaque cookie
* @dev: device that is registering this clock
unsigned int __clk_get_prepare_count(struct clk *clk);
unsigned long __clk_get_rate(struct clk *clk);
unsigned long __clk_get_flags(struct clk *clk);
+bool __clk_is_prepared(struct clk *clk);
bool __clk_is_enabled(struct clk *clk);
struct clk *__clk_lookup(const char *name);
--- /dev/null
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_CLK_SUNXI_H_
+#define __LINUX_CLK_SUNXI_H_
+
+void __init sunxi_init_clocks(void);
+
+#endif
void tegra_periph_reset_deassert(struct clk *c);
void tegra_periph_reset_assert(struct clk *c);
void tegra_clocks_init(void);
+void tegra_clocks_apply_init_table(void);
#endif /* __LINUX_CLK_TEGRA_H_ */
} compat_sigset_t;
struct compat_sigaction {
-#ifndef __ARCH_HAS_ODD_SIGACTION
+#ifndef __ARCH_HAS_IRIX_SIGACTION
compat_uptr_t sa_handler;
compat_ulong_t sa_flags;
#else
- compat_ulong_t sa_flags;
+ compat_uint_t sa_flags;
compat_uptr_t sa_handler;
#endif
#ifdef __ARCH_HAS_SA_RESTORER
extern void debug_show_all_locks(void);
extern void debug_show_held_locks(struct task_struct *task);
extern void debug_check_no_locks_freed(const void *from, unsigned long len);
-extern void debug_check_no_locks_held(void);
+extern void debug_check_no_locks_held(struct task_struct *task);
#else
static inline void debug_show_all_locks(void)
{
}
static inline void
-debug_check_no_locks_held(void)
+debug_check_no_locks_held(struct task_struct *task)
{
}
#endif
#endif
#else /* !CONFIG_PM_DEVFREQ */
-static struct devfreq *devfreq_add_device(struct device *dev,
+static inline struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data)
return NULL;
}
-static int devfreq_remove_device(struct devfreq *devfreq)
+static inline int devfreq_remove_device(struct devfreq *devfreq)
{
return 0;
}
-static int devfreq_suspend_device(struct devfreq *devfreq)
+static inline int devfreq_suspend_device(struct devfreq *devfreq)
{
return 0;
}
-static int devfreq_resume_device(struct devfreq *devfreq)
+static inline int devfreq_resume_device(struct devfreq *devfreq)
{
return 0;
}
-static struct opp *devfreq_recommended_opp(struct device *dev,
+static inline struct opp *devfreq_recommended_opp(struct device *dev,
unsigned long *freq, u32 flags)
{
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
-static int devfreq_register_opp_notifier(struct device *dev,
+static inline int devfreq_register_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
}
-static int devfreq_unregister_opp_notifier(struct device *dev,
+static inline int devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
u32 ue_count; /* Uncorrectable Errors for this csrow */
u32 ce_count; /* Correctable Errors for this csrow */
- u32 nr_pages; /* combined pages count of all channels */
struct mem_ctl_info *mci; /* the parent */
* sees memory sticks ("dimms"), and the ones that sees memory ranks.
* All old memory controllers enumerate memories per rank, but most
* of the recent drivers enumerate memories per DIMM, instead.
- * When the memory controller is per rank, mem_is_per_rank is true.
+ * When the memory controller is per rank, csbased is true.
*/
unsigned n_layers;
struct edac_mc_layer *layers;
- bool mem_is_per_rank;
+ bool csbased;
/*
* DIMM info. Will eventually remove the entire csrows_info some day
u32 fake_inject_ue;
u16 fake_inject_count;
#endif
- __u8 csbased : 1, /* csrow-based memory controller */
- __resv : 7;
};
#endif
#ifndef FREEZER_H_INCLUDED
#define FREEZER_H_INCLUDED
-#include <linux/debug_locks.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/atomic.h>
static inline bool try_to_freeze(void)
{
- if (!(current->flags & PF_NOFREEZE))
- debug_check_no_locks_held();
might_sleep();
if (likely(!freezing(current)))
return false;
spin_unlock(&fs->lock);
}
+extern bool current_chrooted(void);
+
#endif /* _LINUX_FS_STRUCT_H */
*/
#include <asm/types.h>
+#include <linux/compiler.h>
/* 2^31 + 2^29 - 2^25 + 2^22 - 2^19 - 2^16 + 1 */
#define GOLDEN_RATIO_PRIME_32 0x9e370001UL
#error Wordsize not 32 or 64
#endif
-static inline u64 hash_64(u64 val, unsigned int bits)
+static __always_inline u64 hash_64(u64 val, unsigned int bits)
{
u64 hash = val;
*/
void *idr_find_slowpath(struct idr *idp, int id);
-int idr_pre_get(struct idr *idp, gfp_t gfp_mask);
-int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
void idr_preload(gfp_t gfp_mask);
int idr_alloc(struct idr *idp, void *ptr, int start, int end, gfp_t gfp_mask);
int idr_for_each(struct idr *idp,
/**
* idr_find - return pointer for given id
- * @idp: idr handle
+ * @idr: idr handle
* @id: lookup key
*
* Return the pointer given the id it has been registered with. A %NULL
return idr_find_slowpath(idr, id);
}
-/**
- * idr_get_new - allocate new idr entry
- * @idp: idr handle
- * @ptr: pointer you want associated with the id
- * @id: pointer to the allocated handle
- *
- * Simple wrapper around idr_get_new_above() w/ @starting_id of zero.
- */
-static inline int idr_get_new(struct idr *idp, void *ptr, int *id)
-{
- return idr_get_new_above(idp, ptr, 0, id);
-}
-
/**
* idr_for_each_entry - iterate over an idr's elements of a given type
* @idp: idr handle
entry != NULL; \
++id, entry = (typeof(entry))idr_get_next((idp), &(id)))
-void __idr_remove_all(struct idr *idp); /* don't use */
+/*
+ * Don't use the following functions. These exist only to suppress
+ * deprecated warnings on EXPORT_SYMBOL()s.
+ */
+int __idr_pre_get(struct idr *idp, gfp_t gfp_mask);
+int __idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
+void __idr_remove_all(struct idr *idp);
+
+/**
+ * idr_pre_get - reserve resources for idr allocation
+ * @idp: idr handle
+ * @gfp_mask: memory allocation flags
+ *
+ * Part of old alloc interface. This is going away. Use
+ * idr_preload[_end]() and idr_alloc() instead.
+ */
+static inline int __deprecated idr_pre_get(struct idr *idp, gfp_t gfp_mask)
+{
+ return __idr_pre_get(idp, gfp_mask);
+}
+
+/**
+ * idr_get_new_above - allocate new idr entry above or equal to a start id
+ * @idp: idr handle
+ * @ptr: pointer you want associated with the id
+ * @starting_id: id to start search at
+ * @id: pointer to the allocated handle
+ *
+ * Part of old alloc interface. This is going away. Use
+ * idr_preload[_end]() and idr_alloc() instead.
+ */
+static inline int __deprecated idr_get_new_above(struct idr *idp, void *ptr,
+ int starting_id, int *id)
+{
+ return __idr_get_new_above(idp, ptr, starting_id, id);
+}
+
+/**
+ * idr_get_new - allocate new idr entry
+ * @idp: idr handle
+ * @ptr: pointer you want associated with the id
+ * @id: pointer to the allocated handle
+ *
+ * Part of old alloc interface. This is going away. Use
+ * idr_preload[_end]() and idr_alloc() instead.
+ */
+static inline int __deprecated idr_get_new(struct idr *idp, void *ptr, int *id)
+{
+ return __idr_get_new_above(idp, ptr, 0, id);
+}
/**
* idr_remove_all - remove all ids from the given idr tree
};
#ifdef CONFIG_IIO_BUFFER
+irqreturn_t st_sensors_trigger_handler(int irq, void *p);
+
+int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
+#endif
+
+#ifdef CONFIG_IIO_TRIGGER
int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
const struct iio_trigger_ops *trigger_ops);
void st_sensors_deallocate_trigger(struct iio_dev *indio_dev);
-irqreturn_t st_sensors_trigger_handler(int irq, void *p);
-
-int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
#else
static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
const struct iio_trigger_ops *trigger_ops)
#ifdef CONFIG_IRQ_WORK
bool irq_work_needs_cpu(void);
#else
-static bool irq_work_needs_cpu(void) { return false; }
+static inline bool irq_work_needs_cpu(void) { return false; }
#endif
#endif /* _LINUX_IRQ_WORK_H */
unsigned long int_sqrt(unsigned long);
extern void bust_spinlocks(int yes);
-extern void wake_up_klogd(void);
extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
extern int panic_timeout;
extern int panic_on_oops;
int kvm_write_guest_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
void *data, unsigned long len);
int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
- gpa_t gpa);
+ gpa_t gpa, unsigned long len);
int kvm_clear_guest_page(struct kvm *kvm, gfn_t gfn, int offset, int len);
int kvm_clear_guest(struct kvm *kvm, gpa_t gpa, unsigned long len);
struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn);
u64 generation;
gpa_t gpa;
unsigned long hva;
+ unsigned long len;
struct kvm_memory_slot *memslot;
};
pos = n)
#define hlist_entry_safe(ptr, type, member) \
- (ptr) ? hlist_entry(ptr, type, member) : NULL
+ ({ typeof(ptr) ____ptr = (ptr); \
+ ____ptr ? hlist_entry(____ptr, type, member) : NULL; \
+ })
/**
* hlist_for_each_entry - iterate over list of given type
MAX77693_MUIC_REG_END,
};
+/* MAX77693 INTMASK1~2 Register */
+#define INTMASK1_ADC1K_SHIFT 3
+#define INTMASK1_ADCERR_SHIFT 2
+#define INTMASK1_ADCLOW_SHIFT 1
+#define INTMASK1_ADC_SHIFT 0
+#define INTMASK1_ADC1K_MASK (1 << INTMASK1_ADC1K_SHIFT)
+#define INTMASK1_ADCERR_MASK (1 << INTMASK1_ADCERR_SHIFT)
+#define INTMASK1_ADCLOW_MASK (1 << INTMASK1_ADCLOW_SHIFT)
+#define INTMASK1_ADC_MASK (1 << INTMASK1_ADC_SHIFT)
+
+#define INTMASK2_VIDRM_SHIFT 5
+#define INTMASK2_VBVOLT_SHIFT 4
+#define INTMASK2_DXOVP_SHIFT 3
+#define INTMASK2_DCDTMR_SHIFT 2
+#define INTMASK2_CHGDETRUN_SHIFT 1
+#define INTMASK2_CHGTYP_SHIFT 0
+#define INTMASK2_VIDRM_MASK (1 << INTMASK2_VIDRM_SHIFT)
+#define INTMASK2_VBVOLT_MASK (1 << INTMASK2_VBVOLT_SHIFT)
+#define INTMASK2_DXOVP_MASK (1 << INTMASK2_DXOVP_SHIFT)
+#define INTMASK2_DCDTMR_MASK (1 << INTMASK2_DCDTMR_SHIFT)
+#define INTMASK2_CHGDETRUN_MASK (1 << INTMASK2_CHGDETRUN_SHIFT)
+#define INTMASK2_CHGTYP_MASK (1 << INTMASK2_CHGTYP_SHIFT)
+
/* MAX77693 MUIC - STATUS1~3 Register */
#define STATUS1_ADC_SHIFT (0)
#define STATUS1_ADCLOW_SHIFT (5)
};
struct palmas_platform_data {
+ int irq_flags;
int gpio_base;
/* bit value to be loaded to the POWER_CTRL register */
void tps65912_device_exit(struct tps65912 *tps65912);
int tps65912_irq_init(struct tps65912 *tps65912, int irq,
struct tps65912_platform_data *pdata);
+int tps65912_irq_exit(struct tps65912 *tps65912);
#endif /* __LINUX_MFD_TPS65912_H */
#ifndef __MFD_WM831X_AUXADC_H__
#define __MFD_WM831X_AUXADC_H__
+struct wm831x;
+
/*
* R16429 (0x402D) - AuxADC Data
*/
#include <linux/irqdomain.h>
#include <linux/list.h>
#include <linux/regmap.h>
+#include <linux/mfd/wm831x/auxadc.h>
/*
* Register values.
};
struct wm831x;
-enum wm831x_auxadc;
typedef int (*wm831x_auxadc_read_fn)(struct wm831x *wm831x,
enum wm831x_auxadc input);
#define VM_PFNMAP 0x00000400 /* Page-ranges managed without "struct page", just pure PFN */
#define VM_DENYWRITE 0x00000800 /* ETXTBSY on write attempts.. */
-#define VM_POPULATE 0x00001000
#define VM_LOCKED 0x00002000
#define VM_IO 0x00004000 /* Memory mapped I/O or similar */
{
return _calc_vm_trans(flags, MAP_GROWSDOWN, VM_GROWSDOWN ) |
_calc_vm_trans(flags, MAP_DENYWRITE, VM_DENYWRITE ) |
- ((flags & MAP_LOCKED) ? (VM_LOCKED | VM_POPULATE) : 0) |
- (((flags & (MAP_POPULATE | MAP_NONBLOCK)) == MAP_POPULATE) ?
- VM_POPULATE : 0);
+ _calc_vm_trans(flags, MAP_LOCKED, VM_LOCKED );
}
#endif /* _LINUX_MMAN_H */
return test_bit(ZONE_OOM_LOCKED, &zone->flags);
}
-static inline unsigned zone_end_pfn(const struct zone *zone)
+static inline unsigned long zone_end_pfn(const struct zone *zone)
{
return zone->zone_start_pfn + zone->spanned_pages;
}
#define MNT_INTERNAL 0x4000
+#define MNT_LOCK_READONLY 0x400000
+
struct vfsmount {
struct dentry *mnt_root; /* root of the mounted tree */
struct super_block *mnt_sb; /* pointer to superblock */
* This happens with the Renesas AG-AND chips, possibly others.
*/
#define BBT_AUTO_REFRESH 0x00000080
+/*
+ * Chip requires ready check on read (for auto-incremented sequential read).
+ * True only for small page devices; large page devices do not support
+ * autoincrement.
+ */
+#define NAND_NEED_READRDY 0x00000100
+
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
-#define FB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
-#define FB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */
+#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
+#define MXSFB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */
struct mxsfb_platform_data {
struct fb_videomode *mode_list;
* allocated. If specified,fb_size must also be specified.
* fb_phys must be unused by Linux.
*/
+ u32 sync; /* sync mask, contains MXSFB specifics not
+ * carried in fb_info->var.sync
+ */
};
#endif /* __LINUX_MXSFB_H */
#define NETDEV_HW_ADDR_T_SLAVE 3
#define NETDEV_HW_ADDR_T_UNICAST 4
#define NETDEV_HW_ADDR_T_MULTICAST 5
- bool synced;
bool global_use;
int refcount;
+ int synced;
struct rcu_head rcu_head;
};
*
* int (*ndo_bridge_setlink)(struct net_device *dev, struct nlmsghdr *nlh)
* int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq,
- * struct net_device *dev)
+ * struct net_device *dev, u32 filter_mask)
*
* int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
* Called to change device carrier. Soft-devices (like dummy, team, etc)
NVME_LBAF_RP_DEGRADED = 3,
};
+struct nvme_smart_log {
+ __u8 critical_warning;
+ __u8 temperature[2];
+ __u8 avail_spare;
+ __u8 spare_thresh;
+ __u8 percent_used;
+ __u8 rsvd6[26];
+ __u8 data_units_read[16];
+ __u8 data_units_written[16];
+ __u8 host_reads[16];
+ __u8 host_writes[16];
+ __u8 ctrl_busy_time[16];
+ __u8 power_cycles[16];
+ __u8 power_on_hours[16];
+ __u8 unsafe_shutdowns[16];
+ __u8 media_errors[16];
+ __u8 num_err_log_entries[16];
+ __u8 rsvd192[320];
+};
+
+enum {
+ NVME_SMART_CRIT_SPARE = 1 << 0,
+ NVME_SMART_CRIT_TEMPERATURE = 1 << 1,
+ NVME_SMART_CRIT_RELIABILITY = 1 << 2,
+ NVME_SMART_CRIT_MEDIA = 1 << 3,
+ NVME_SMART_CRIT_VOLATILE_MEMORY = 1 << 4,
+};
+
struct nvme_lba_range_type {
__u8 type;
__u8 attributes;
extern struct property *of_find_property(const struct device_node *np,
const char *name,
int *lenp);
+extern int of_property_read_u32_index(const struct device_node *np,
+ const char *propname,
+ u32 index, u32 *out_value);
extern int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz);
extern int of_property_read_u16_array(const struct device_node *np,
return NULL;
}
+static inline int of_property_read_u32_index(const struct device_node *np,
+ const char *propname, u32 index, u32 *out_value)
+{
+ return -ENOSYS;
+}
+
static inline int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz)
{
void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size);
void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size);
+void __iomem __must_check *pci_platform_rom(struct pci_dev *pdev, size_t *size);
/* Power management related routines */
int pci_save_state(struct pci_dev *dev);
static inline void perf_event_task_tick(void) { }
#endif
+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_INTEL)
+extern void perf_restore_debug_store(void);
+#else
+static inline void perf_restore_debug_store(void) { }
+#endif
+
#define perf_output_put(handle, x) perf_output_copy((handle), &(x), sizeof(x))
/*
--- /dev/null
+/*
+ * Renesas INTC External IRQ Pin Driver
+ *
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __IRQ_RENESAS_INTC_IRQPIN_H__
+#define __IRQ_RENESAS_INTC_IRQPIN_H__
+
+struct renesas_intc_irqpin_config {
+ unsigned int sense_bitfield_width;
+ unsigned int irq_base;
+ bool control_parent;
+};
+
+#endif /* __IRQ_RENESAS_INTC_IRQPIN_H__ */
--- /dev/null
+/*
+ * Renesas IRQC Driver
+ *
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __IRQ_RENESAS_IRQC_H__
+#define __IRQ_RENESAS_IRQC_H__
+
+struct renesas_irqc_config {
+ unsigned int irq_base;
+};
+
+#endif /* __IRQ_RENESAS_IRQC_H__ */
--- /dev/null
+#ifndef __PLATFORM_DATA_SDHCI_S3C_H
+#define __PLATFORM_DATA_SDHCI_S3C_H
+
+struct platform_device;
+
+enum cd_types {
+ S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
+ S3C_SDHCI_CD_EXTERNAL, /* use external callback */
+ S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
+ S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
+ S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
+};
+
+/**
+ * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
+ * @max_width: The maximum number of data bits supported.
+ * @host_caps: Standard MMC host capabilities bit field.
+ * @host_caps2: The second standard MMC host capabilities bit field.
+ * @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @ext_cd_init: Initialize external card detect subsystem. Called on
+ * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ * notify_func argument is a callback to the sdhci-s3c driver
+ * that triggers the card detection event. Callback arguments:
+ * dev is pointer to platform device of the host controller,
+ * state is new state of the card (0 - removed, 1 - inserted).
+ * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
+ * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ * notify_func argument is the same callback as for ext_cd_init.
+ * @ext_cd_gpio: gpio pin used for external CD line, valid only if
+ * cd_type == S3C_SDHCI_CD_GPIO
+ * @ext_cd_gpio_invert: invert values for external CD gpio line
+ * @cfg_gpio: Configure the GPIO for a specific card bit-width
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio or
+ * card speed information.
+*/
+struct s3c_sdhci_platdata {
+ unsigned int max_width;
+ unsigned int host_caps;
+ unsigned int host_caps2;
+ unsigned int pm_caps;
+ enum cd_types cd_type;
+
+ int ext_cd_gpio;
+ bool ext_cd_gpio_invert;
+ int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
+ int state));
+ int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
+ int state));
+
+ void (*cfg_gpio)(struct platform_device *dev, int width);
+};
+
+
+#endif /* __PLATFORM_DATA_SDHCI_S3C_H */
extern int dmesg_restrict;
extern int kptr_restrict;
+extern void wake_up_klogd(void);
+
void log_buf_kexec_setup(void);
void __init setup_log_buf(int early);
#else
return false;
}
+static inline void wake_up_klogd(void)
+{
+}
+
static inline void log_buf_kexec_setup(void)
{
}
*/
#include <linux/cgroup.h>
+#include <linux/errno.h>
/*
* The core object. the cgroup that wishes to account for some
--- /dev/null
+#ifndef _LINUX_RESET_CONTROLLER_H_
+#define _LINUX_RESET_CONTROLLER_H_
+
+#include <linux/list.h>
+
+struct reset_controller_dev;
+
+/**
+ * struct reset_control_ops
+ *
+ * @reset: for self-deasserting resets, does all necessary
+ * things to reset the device
+ * @assert: manually assert the reset line, if supported
+ * @deassert: manually deassert the reset line, if supported
+ */
+struct reset_control_ops {
+ int (*reset)(struct reset_controller_dev *rcdev, unsigned long id);
+ int (*assert)(struct reset_controller_dev *rcdev, unsigned long id);
+ int (*deassert)(struct reset_controller_dev *rcdev, unsigned long id);
+};
+
+struct module;
+struct device_node;
+
+/**
+ * struct reset_controller_dev - reset controller entity that might
+ * provide multiple reset controls
+ * @ops: a pointer to device specific struct reset_control_ops
+ * @owner: kernel module of the reset controller driver
+ * @list: internal list of reset controller devices
+ * @of_node: corresponding device tree node as phandle target
+ * @of_reset_n_cells: number of cells in reset line specifiers
+ * @of_xlate: translation function to translate from specifier as found in the
+ * device tree to id as given to the reset control ops
+ * @nr_resets: number of reset controls in this reset controller device
+ */
+struct reset_controller_dev {
+ struct reset_control_ops *ops;
+ struct module *owner;
+ struct list_head list;
+ struct device_node *of_node;
+ int of_reset_n_cells;
+ int (*of_xlate)(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec);
+ unsigned int nr_resets;
+};
+
+int reset_controller_register(struct reset_controller_dev *rcdev);
+void reset_controller_unregister(struct reset_controller_dev *rcdev);
+
+#endif
--- /dev/null
+#ifndef _LINUX_RESET_H_
+#define _LINUX_RESET_H_
+
+struct device;
+struct reset_control;
+
+int reset_control_reset(struct reset_control *rstc);
+int reset_control_assert(struct reset_control *rstc);
+int reset_control_deassert(struct reset_control *rstc);
+
+struct reset_control *reset_control_get(struct device *dev, const char *id);
+void reset_control_put(struct reset_control *rstc);
+struct reset_control *devm_reset_control_get(struct device *dev, const char *id);
+
+int device_reset(struct device *dev);
+
+#endif
extern int sigsuspend(sigset_t *);
struct sigaction {
-#ifndef __ARCH_HAS_ODD_SIGACTION
+#ifndef __ARCH_HAS_IRIX_SIGACTION
__sighandler_t sa_handler;
unsigned long sa_flags;
#else
- unsigned long sa_flags;
+ unsigned int sa_flags;
__sighandler_t sa_handler;
#endif
#ifdef __ARCH_HAS_SA_RESTORER
union {
__u32 mark;
__u32 dropcount;
- __u32 avail_size;
+ __u32 reserved_tailroom;
};
sk_buff_data_t inner_transport_header;
* do not lose pfmemalloc information as the pages would not be
* allocated using __GFP_MEMALLOC.
*/
- if (page->pfmemalloc && !page->mapping)
- skb->pfmemalloc = true;
frag->page.p = page;
frag->page_offset = off;
skb_frag_size_set(frag, size);
+
+ page = compound_head(page);
+ if (page->pfmemalloc && !page->mapping)
+ skb->pfmemalloc = true;
}
/**
*/
static inline int skb_availroom(const struct sk_buff *skb)
{
- return skb_is_nonlinear(skb) ? 0 : skb->avail_size - skb->len;
+ if (skb_is_nonlinear(skb))
+ return 0;
+
+ return skb->end - skb->tail - skb->reserved_tailroom;
}
/**
#endif
}
+static inline void nf_reset_trace(struct sk_buff *skb)
+{
+#if IS_ENABLED(CONFIG_NETFILTER_XT_TARGET_TRACE)
+ skb->nf_trace = 0;
+#endif
+}
+
/* Note: This doesn't put any conntrack and bridge info in dst. */
static inline void __nf_copy(struct sk_buff *dst, const struct sk_buff *src)
{
/* Adding event notification support elements */
#define THERMAL_GENL_FAMILY_NAME "thermal_event"
#define THERMAL_GENL_VERSION 0x01
-#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_group"
+#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_grp"
/* Default Thermal Governor */
#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
* For encapsulation sockets.
*/
int (*encap_rcv)(struct sock *sk, struct sk_buff *skb);
+ void (*encap_destroy)(struct sock *sk);
};
static inline struct udp_sock *udp_sk(const struct sock *sk)
u16 connected;
};
+extern u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf);
extern int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting);
extern void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf);
extern struct sk_buff *cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb, __le32 sign);
* @name: For diagnostics, identifies the function.
* @strings: tables of strings, keyed by identifiers assigned during bind()
* and by language IDs provided in control requests
- * @descriptors: Table of full (or low) speed descriptors, using interface and
+ * @fs_descriptors: Table of full (or low) speed descriptors, using interface and
* string identifiers assigned during @bind(). If this pointer is null,
* the function will not be available at full speed (or at low speed).
* @hs_descriptors: Table of high speed descriptors, using interface and
* after function notifications
* @resume: Notifies configuration when the host restarts USB traffic,
* before function notifications
+ * @gadget_driver: Gadget driver controlling this driver
*
* Devices default to reporting self powered operation. Devices which rely
* on bus powered operation should report this in their @bind method.
*/
int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
struct usb_device *, enum usb3_link_state state);
+ int (*find_raw_port_number)(struct usb_hcd *, int);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
extern int usb_add_hcd(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags);
extern void usb_remove_hcd(struct usb_hcd *hcd);
+extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
struct platform_device;
extern void usb_hcd_platform_shutdown(struct platform_device *dev);
struct nop_usb_xceiv_platform_data {
enum usb_phy_type type;
+ unsigned long clk_rate;
+
+ /* if set fails with -EPROBE_DEFER if can't get regulator */
+ unsigned int needs_vcc:1;
+ unsigned int needs_reset:1;
};
#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
* port.
* @flags: usb serial port flags
* @write_wait: a wait_queue_head_t used by the port.
+ * @delta_msr_wait: modem-status-change wait queue
* @work: work queue entry for the line discipline waking up.
* @throttled: nonzero if the read urb is inactive to throttle the device
* @throttle_req: nonzero if the tty wants to throttle us
unsigned long flags;
wait_queue_head_t write_wait;
+ wait_queue_head_t delta_msr_wait;
struct work_struct work;
char throttled;
char throttle_req;
/*-------------------------------------------------------------------------*/
+#if IS_ENABLED(CONFIG_USB_ULPI)
struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
unsigned int flags);
+#else
+static inline struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
+ unsigned int flags)
+{
+ return NULL;
+}
+#endif
#ifdef CONFIG_USB_ULPI_VIEWPORT
/* access ops for controllers with a viewport register */
kuid_t owner;
kgid_t group;
unsigned int proc_inum;
+ bool may_mount_sysfs;
+ bool may_mount_proc;
};
extern struct user_namespace init_user_ns;
#endif
+void update_mnt_policy(struct user_namespace *userns);
+
#endif /* _LINUX_USER_H */
static inline struct neighbour *dst_neigh_lookup(const struct dst_entry *dst, const void *daddr)
{
- return dst->ops->neigh_lookup(dst, NULL, daddr);
+ struct neighbour *n = dst->ops->neigh_lookup(dst, NULL, daddr);
+ return IS_ERR(n) ? NULL : n;
}
static inline struct neighbour *dst_neigh_lookup_skb(const struct dst_entry *dst,
struct sk_buff *skb)
{
- return dst->ops->neigh_lookup(dst, skb, NULL);
+ struct neighbour *n = dst->ops->neigh_lookup(dst, skb, NULL);
+ return IS_ERR(n) ? NULL : n;
}
static inline void dst_link_failure(struct sk_buff *skb)
__be32 ports;
__be16 port16[2];
};
+ u16 thoff;
u8 ip_proto;
};
#define INETFRAGS_HASHSZ 64
+/* averaged:
+ * max_depth = default ipfrag_high_thresh / INETFRAGS_HASHSZ /
+ * rounded up (SKB_TRUELEN(0) + sizeof(struct ipq or
+ * struct frag_queue))
+ */
+#define INETFRAGS_MAXDEPTH 128
+
struct inet_frags {
struct hlist_head hash[INETFRAGS_HASHSZ];
/* This rwlock is a global lock (seperate per IPv4, IPv6 and
struct inet_frag_queue *inet_frag_find(struct netns_frags *nf,
struct inet_frags *f, void *key, unsigned int hash)
__releases(&f->lock);
+void inet_frag_maybe_warn_overflow(struct inet_frag_queue *q,
+ const char *prefix);
static inline void inet_frag_put(struct inet_frag_queue *q, struct inet_frags *f)
{
};
#ifdef CONFIG_IP_ROUTE_MULTIPATH
-
#define FIB_RES_NH(res) ((res).fi->fib_nh[(res).nh_sel])
-
-#define FIB_TABLE_HASHSZ 2
-
#else /* CONFIG_IP_ROUTE_MULTIPATH */
-
#define FIB_RES_NH(res) ((res).fi->fib_nh[0])
+#endif /* CONFIG_IP_ROUTE_MULTIPATH */
+#ifdef CONFIG_IP_MULTIPLE_TABLES
#define FIB_TABLE_HASHSZ 256
-
-#endif /* CONFIG_IP_ROUTE_MULTIPATH */
+#else
+#define FIB_TABLE_HASHSZ 2
+#endif
extern __be32 fib_info_update_nh_saddr(struct net *net, struct fib_nh *nh);
int sysctl_sync_retries;
int sysctl_nat_icmp_send;
int sysctl_pmtu_disc;
+ int sysctl_backup_only;
/* ip_vs_lblc */
int sysctl_lblc_expiration;
return ipvs->sysctl_pmtu_disc;
}
+static inline int sysctl_backup_only(struct netns_ipvs *ipvs)
+{
+ return ipvs->sync_state & IP_VS_STATE_BACKUP &&
+ ipvs->sysctl_backup_only;
+}
+
#else
static inline int sysctl_sync_threshold(struct netns_ipvs *ipvs)
return 1;
}
+static inline int sysctl_backup_only(struct netns_ipvs *ipvs)
+{
+ return 0;
+}
+
#endif
/*
{
struct iphdr *iph = ip_hdr(skb);
- if (iph->frag_off & htons(IP_DF))
- iph->id = 0;
- else {
- /* Use inner packet iph-id if possible. */
- if (skb->protocol == htons(ETH_P_IP) && old_iph->id)
- iph->id = old_iph->id;
- else
- __ip_select_ident(iph, dst,
- (skb_shinfo(skb)->gso_segs ?: 1) - 1);
- }
+ /* Use inner packet iph-id if possible. */
+ if (skb->protocol == htons(ETH_P_IP) && old_iph->id)
+ iph->id = old_iph->id;
+ else
+ __ip_select_ident(iph, dst,
+ (skb_shinfo(skb)->gso_segs ?: 1) - 1);
}
#endif
/*
* DISCOVERY LAYER
*****************************/
-int fc_disc_init(struct fc_lport *);
+void fc_disc_init(struct fc_lport *);
+void fc_disc_config(struct fc_lport *, void *);
static inline struct fc_lport *fc_disc_lport(struct fc_disc *disc)
{
/* status */
u32 connect:1; /* source and sink widgets are connected */
u32 walked:1; /* path has been walked */
+ u32 walking:1; /* path is in the process of being walked */
u32 weak:1; /* path ignored for power management */
int (*connected)(struct snd_soc_dapm_widget *source,
#define ACORE 0x08 /* ... dumped core */
#define AXSIG 0x10 /* ... was killed by a signal */
-#ifdef __BIG_ENDIAN
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
#define ACCT_BYTEORDER 0x80 /* accounting file is big endian */
-#else
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
#define ACCT_BYTEORDER 0x00 /* accounting file is little endian */
+#else
+#error unspecified endianness
#endif
#ifndef __KERNEL__
__s64 res2; /* secondary result */
};
-#if defined(__LITTLE_ENDIAN)
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
#define PADDED(x,y) x, y
-#elif defined(__BIG_ENDIAN)
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
#define PADDED(x,y) y, x
#else
#error edit for your odd byteorder.
PACKET_DIAG_TX_RING,
PACKET_DIAG_FANOUT,
- PACKET_DIAG_MAX,
+ __PACKET_DIAG_MAX,
};
+#define PACKET_DIAG_MAX (__PACKET_DIAG_MAX - 1)
+
struct packet_diag_info {
__u32 pdi_index;
__u32 pdi_version;
__u32 failed_disks; /* 4 Number of failed disks */
__u32 spare_disks; /* 5 Number of spare disks */
__u32 sb_csum; /* 6 checksum of the whole superblock */
-#ifdef __BIG_ENDIAN
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
__u32 events_hi; /* 7 high-order of superblock update count */
__u32 events_lo; /* 8 low-order of superblock update count */
__u32 cp_events_hi; /* 9 high-order of checkpoint update count */
__u32 cp_events_lo; /* 10 low-order of checkpoint update count */
-#else
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
__u32 events_lo; /* 7 low-order of superblock update count */
__u32 events_hi; /* 8 high-order of superblock update count */
__u32 cp_events_lo; /* 9 low-order of checkpoint update count */
__u32 cp_events_hi; /* 10 high-order of checkpoint update count */
+#else
+#error unspecified endianness
#endif
__u32 recovery_cp; /* 11 recovery checkpoint sector count */
/* There are only valid for minor_version > 90 */
#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */
#define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */
#define PORT_BRCM_TRUMANAGE 25
-#define PORT_MAX_8250 25 /* max port ID */
+#define PORT_ALTR_16550_F32 26 /* Altera 16550 UART with 32 FIFOs */
+#define PORT_ALTR_16550_F64 27 /* Altera 16550 UART with 64 FIFOs */
+#define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
+#define PORT_MAX_8250 28 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
UNIX_DIAG_MEMINFO,
UNIX_DIAG_SHUTDOWN,
- UNIX_DIAG_MAX,
+ __UNIX_DIAG_MAX,
};
+#define UNIX_DIAG_MAX (__UNIX_DIAG_MAX - 1)
+
struct unix_diag_vfs {
__u32 udiag_vfs_ino;
__u32 udiag_vfs_dev;
*/
#define ATMEL_LCDC_WIRING_BGR 0
#define ATMEL_LCDC_WIRING_RGB 1
-#define ATMEL_LCDC_WIRING_RGB555 2
+struct atmel_lcdfb_config;
/* LCD Controller info data structure, stored in device platform_data */
struct atmel_lcdfb_info {
void (*atmel_lcdfb_power_control)(int on);
struct fb_monspecs *default_monspecs;
u32 pseudo_palette[16];
+
+ struct atmel_lcdfb_config *config;
};
#define ATMEL_LCDC_DMABADDR1 0x00
uint8_t _pad3;
} __attribute__((__packed__));
+struct blkif_request_other {
+ uint8_t _pad1;
+ blkif_vdev_t _pad2; /* only for read/write requests */
+#ifdef CONFIG_X86_64
+ uint32_t _pad3; /* offsetof(blkif_req..,u.other.id)==8*/
+#endif
+ uint64_t id; /* private guest value, echoed in resp */
+} __attribute__((__packed__));
+
struct blkif_request {
uint8_t operation; /* BLKIF_OP_??? */
union {
struct blkif_request_rw rw;
struct blkif_request_discard discard;
+ struct blkif_request_other other;
} u;
} __attribute__((__packed__));
#define PHYSDEVOP_pci_device_remove 26
#define PHYSDEVOP_restore_msi_ext 27
+/*
+ * Dom0 should use these two to announce MMIO resources assigned to
+ * MSI-X capable devices won't (prepare) or may (release) change.
+ */
+#define PHYSDEVOP_prepare_msix 30
+#define PHYSDEVOP_release_msix 31
struct physdev_pci_device {
/* IN */
uint16_t seg;
menu "General setup"
-config EXPERIMENTAL
- bool
- default y
-
config BROKEN
bool
int flags, const char *dev_name,
void *data)
{
- if (!(flags & MS_KERNMOUNT))
- data = current->nsproxy->ipc_ns;
+ if (!(flags & MS_KERNMOUNT)) {
+ struct ipc_namespace *ns = current->nsproxy->ipc_ns;
+ /* Don't allow mounting unless the caller has CAP_SYS_ADMIN
+ * over the ipc namespace.
+ */
+ if (!ns_capable(ns->user_ns, CAP_SYS_ADMIN))
+ return ERR_PTR(-EPERM);
+
+ data = ns;
+ }
return mount_ns(fs_type, flags, data, mqueue_fill_super);
}
fd = error;
}
mutex_unlock(&root->d_inode->i_mutex);
- mnt_drop_write(mnt);
+ if (!ro)
+ mnt_drop_write(mnt);
out_putname:
putname(name);
return fd;
goto out_unlock;
break;
}
+ msg = ERR_PTR(-EAGAIN);
} else
break;
msg_counter++;
if (ctxn < 0)
goto next;
ctx = rcu_dereference(current->perf_event_ctxp[ctxn]);
+ if (ctx)
+ perf_event_task_ctx(ctx, task_event);
}
- if (ctx)
- perf_event_task_ctx(ctx, task_event);
next:
put_cpu_ptr(pmu->pmu_cpu_context);
}
+ if (task_event->task_ctx)
+ perf_event_task_ctx(task_event->task_ctx, task_event);
+
rcu_read_unlock();
}
event->attr.sample_period = NSEC_PER_SEC / freq;
hwc->sample_period = event->attr.sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
+ hwc->last_period = hwc->sample_period;
event->attr.freq = 0;
}
}
/*
* Make sure we are holding no locks:
*/
- debug_check_no_locks_held();
+ debug_check_no_locks_held(tsk);
/*
* We can do this unlocked here. The futex code uses this flag
* just to verify whether the pi state cleanup has been done
if ((clone_flags & (CLONE_NEWNS|CLONE_FS)) == (CLONE_NEWNS|CLONE_FS))
return ERR_PTR(-EINVAL);
+ if ((clone_flags & (CLONE_NEWUSER|CLONE_FS)) == (CLONE_NEWUSER|CLONE_FS))
+ return ERR_PTR(-EINVAL);
+
/*
* Thread groups must share signals as well, and detached threads
* can only be started up within the thread group.
* If unsharing a user namespace must also unshare the thread.
*/
if (unshare_flags & CLONE_NEWUSER)
- unshare_flags |= CLONE_THREAD;
+ unshare_flags |= CLONE_THREAD | CLONE_FS;
/*
* If unsharing a pid namespace must also unshare the thread.
*/
* @rw: mapping needs to be read/write (values: VERIFY_READ,
* VERIFY_WRITE)
*
- * Returns a negative error code or 0
+ * Return: a negative error code or 0
+ *
* The key words are stored in *key on success.
*
* For shared mappings, it's (page->index, file_inode(vma->vm_file),
* be "current" except in the case of requeue pi.
* @set_waiters: force setting the FUTEX_WAITERS bit (1) or not (0)
*
- * Returns:
- * 0 - ready to wait
- * 1 - acquired the lock
+ * Return:
+ * 0 - ready to wait;
+ * 1 - acquired the lock;
* <0 - error
*
* The hb->lock and futex_key refs shall be held by the caller.
* then direct futex_lock_pi_atomic() to force setting the FUTEX_WAITERS bit.
* hb1 and hb2 must be held by the caller.
*
- * Returns:
- * 0 - failed to acquire the lock atomicly
- * 1 - acquired the lock
+ * Return:
+ * 0 - failed to acquire the lock atomically;
+ * 1 - acquired the lock;
* <0 - error
*/
static int futex_proxy_trylock_atomic(u32 __user *pifutex,
* Requeue waiters on uaddr1 to uaddr2. In the requeue_pi case, try to acquire
* uaddr2 atomically on behalf of the top waiter.
*
- * Returns:
- * >=0 - on success, the number of tasks requeued or woken
+ * Return:
+ * >=0 - on success, the number of tasks requeued or woken;
* <0 - on error
*/
static int futex_requeue(u32 __user *uaddr1, unsigned int flags,
* The q->lock_ptr must not be held by the caller. A call to unqueue_me() must
* be paired with exactly one earlier call to queue_me().
*
- * Returns:
- * 1 - if the futex_q was still queued (and we removed unqueued it)
+ * Return:
+ * 1 - if the futex_q was still queued (and we removed unqueued it);
* 0 - if the futex_q was already removed by the waking thread
*/
static int unqueue_me(struct futex_q *q)
* the pi_state owner as well as handle race conditions that may allow us to
* acquire the lock. Must be called with the hb lock held.
*
- * Returns:
- * 1 - success, lock taken
- * 0 - success, lock not taken
+ * Return:
+ * 1 - success, lock taken;
+ * 0 - success, lock not taken;
* <0 - on error (-EFAULT)
*/
static int fixup_owner(u32 __user *uaddr, struct futex_q *q, int locked)
* Return with the hb lock held and a q.key reference on success, and unlocked
* with no q.key reference on failure.
*
- * Returns:
- * 0 - uaddr contains val and hb has been locked
+ * Return:
+ * 0 - uaddr contains val and hb has been locked;
* <1 - -EFAULT or -EWOULDBLOCK (uaddr does not contain val) and hb is unlocked
*/
static int futex_wait_setup(u32 __user *uaddr, u32 val, unsigned int flags,
* the wakeup and return the appropriate error code to the caller. Must be
* called with the hb lock held.
*
- * Returns
- * 0 - no early wakeup detected
- * <0 - -ETIMEDOUT or -ERESTARTNOINTR
+ * Return:
+ * 0 = no early wakeup detected;
+ * <0 = -ETIMEDOUT or -ERESTARTNOINTR
*/
static inline
int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb,
* @val: the expected value of uaddr
* @abs_time: absolute timeout
* @bitset: 32 bit wakeup bitset set by userspace, defaults to all
- * @clockrt: whether to use CLOCK_REALTIME (1) or CLOCK_MONOTONIC (0)
* @uaddr2: the pi futex we will take prior to returning to user-space
*
* The caller will wait on uaddr and will be requeued by futex_requeue() to
* there was a need to.
*
* We call schedule in futex_wait_queue_me() when we enqueue and return there
- * via the following:
+ * via the following--
* 1) wakeup on uaddr2 after an atomic lock acquisition by futex_requeue()
* 2) wakeup on uaddr2 after a requeue
* 3) signal
*
* If 4 or 7, we cleanup and return with -ETIMEDOUT.
*
- * Returns:
- * 0 - On success
+ * Return:
+ * 0 - On success;
* <0 - On error
*/
static int futex_wait_requeue_pi(u32 __user *uaddr, unsigned int flags,
}
EXPORT_SYMBOL_GPL(debug_check_no_locks_freed);
-static void print_held_locks_bug(void)
+static void print_held_locks_bug(struct task_struct *curr)
{
if (!debug_locks_off())
return;
printk("\n");
printk("=====================================\n");
- printk("[ BUG: %s/%d still has locks held! ]\n",
- current->comm, task_pid_nr(current));
+ printk("[ BUG: lock held at task exit time! ]\n");
print_kernel_ident();
printk("-------------------------------------\n");
- lockdep_print_held_locks(current);
+ printk("%s/%d is exiting with locks still held!\n",
+ curr->comm, task_pid_nr(curr));
+ lockdep_print_held_locks(curr);
+
printk("\nstack backtrace:\n");
dump_stack();
}
-void debug_check_no_locks_held(void)
+void debug_check_no_locks_held(struct task_struct *task)
{
- if (unlikely(current->lockdep_depth > 0))
- print_held_locks_bug();
+ if (unlikely(task->lockdep_depth > 0))
+ print_held_locks_bug(task);
}
-EXPORT_SYMBOL_GPL(debug_check_no_locks_held);
void debug_show_all_locks(void)
{
int nr;
int rc;
struct task_struct *task, *me = current;
+ int init_pids = thread_group_leader(me) ? 1 : 2;
/* Don't allow any more processes into the pid namespace */
disable_pid_allocation(pid_ns);
*/
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
- if (pid_ns->nr_hashed == 1)
+ if (pid_ns->nr_hashed == init_pids)
break;
schedule();
}
#define MINIMUM_CONSOLE_LOGLEVEL 1 /* Minimum loglevel we let people use */
#define DEFAULT_CONSOLE_LOGLEVEL 7 /* anything MORE serious than KERN_DEBUG */
-DECLARE_WAIT_QUEUE_HEAD(log_wait);
-
int console_printk[4] = {
DEFAULT_CONSOLE_LOGLEVEL, /* console_loglevel */
DEFAULT_MESSAGE_LOGLEVEL, /* default_message_loglevel */
static DEFINE_RAW_SPINLOCK(logbuf_lock);
#ifdef CONFIG_PRINTK
+DECLARE_WAIT_QUEUE_HEAD(log_wait);
/* the next printk record to read by syslog(READ) or /proc/kmsg */
static u64 syslog_seq;
static u32 syslog_idx;
return console_locked;
}
-/*
- * Delayed printk version, for scheduler-internal messages:
- */
-#define PRINTK_BUF_SIZE 512
-
-#define PRINTK_PENDING_WAKEUP 0x01
-#define PRINTK_PENDING_SCHED 0x02
-
-static DEFINE_PER_CPU(int, printk_pending);
-static DEFINE_PER_CPU(char [PRINTK_BUF_SIZE], printk_sched_buf);
-
-static void wake_up_klogd_work_func(struct irq_work *irq_work)
-{
- int pending = __this_cpu_xchg(printk_pending, 0);
-
- if (pending & PRINTK_PENDING_SCHED) {
- char *buf = __get_cpu_var(printk_sched_buf);
- printk(KERN_WARNING "[sched_delayed] %s", buf);
- }
-
- if (pending & PRINTK_PENDING_WAKEUP)
- wake_up_interruptible(&log_wait);
-}
-
-static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = {
- .func = wake_up_klogd_work_func,
- .flags = IRQ_WORK_LAZY,
-};
-
-void wake_up_klogd(void)
-{
- preempt_disable();
- if (waitqueue_active(&log_wait)) {
- this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
- irq_work_queue(&__get_cpu_var(wake_up_klogd_work));
- }
- preempt_enable();
-}
-
static void console_cont_flush(char *text, size_t size)
{
unsigned long flags;
late_initcall(printk_late_init);
#if defined CONFIG_PRINTK
+/*
+ * Delayed printk version, for scheduler-internal messages:
+ */
+#define PRINTK_BUF_SIZE 512
+
+#define PRINTK_PENDING_WAKEUP 0x01
+#define PRINTK_PENDING_SCHED 0x02
+
+static DEFINE_PER_CPU(int, printk_pending);
+static DEFINE_PER_CPU(char [PRINTK_BUF_SIZE], printk_sched_buf);
+
+static void wake_up_klogd_work_func(struct irq_work *irq_work)
+{
+ int pending = __this_cpu_xchg(printk_pending, 0);
+
+ if (pending & PRINTK_PENDING_SCHED) {
+ char *buf = __get_cpu_var(printk_sched_buf);
+ printk(KERN_WARNING "[sched_delayed] %s", buf);
+ }
+
+ if (pending & PRINTK_PENDING_WAKEUP)
+ wake_up_interruptible(&log_wait);
+}
+
+static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = {
+ .func = wake_up_klogd_work_func,
+ .flags = IRQ_WORK_LAZY,
+};
+
+void wake_up_klogd(void)
+{
+ preempt_disable();
+ if (waitqueue_active(&log_wait)) {
+ this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
+ irq_work_queue(&__get_cpu_var(wake_up_klogd_work));
+ }
+ preempt_enable();
+}
int printk_sched(const char *fmt, ...)
{
if (force_default || ka->sa.sa_handler != SIG_IGN)
ka->sa.sa_handler = SIG_DFL;
ka->sa.sa_flags = 0;
+#ifdef __ARCH_HAS_SA_RESTORER
+ ka->sa.sa_restorer = NULL;
+#endif
sigemptyset(&ka->sa.sa_mask);
ka++;
}
/**
* sys_rt_sigpending - examine a pending signal that has been raised
* while blocked
- * @set: stores pending signals
+ * @uset: stores pending signals
* @sigsetsize: size of sigset_t type or larger
*/
SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, uset, size_t, sigsetsize)
char poweroff_cmd[POWEROFF_CMD_PATH_LEN] = "/sbin/poweroff";
-static int __orderly_poweroff(void)
+static int __orderly_poweroff(bool force)
{
- int argc;
char **argv;
static char *envp[] = {
"HOME=/",
};
int ret;
- argv = argv_split(GFP_ATOMIC, poweroff_cmd, &argc);
- if (argv == NULL) {
+ argv = argv_split(GFP_KERNEL, poweroff_cmd, NULL);
+ if (argv) {
+ ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_EXEC);
+ argv_free(argv);
+ } else {
printk(KERN_WARNING "%s failed to allocate memory for \"%s\"\n",
- __func__, poweroff_cmd);
- return -ENOMEM;
+ __func__, poweroff_cmd);
+ ret = -ENOMEM;
}
- ret = call_usermodehelper_fns(argv[0], argv, envp, UMH_WAIT_EXEC,
- NULL, NULL, NULL);
- argv_free(argv);
+ if (ret && force) {
+ printk(KERN_WARNING "Failed to start orderly shutdown: "
+ "forcing the issue\n");
+ /*
+ * I guess this should try to kick off some daemon to sync and
+ * poweroff asap. Or not even bother syncing if we're doing an
+ * emergency shutdown?
+ */
+ emergency_sync();
+ kernel_power_off();
+ }
return ret;
}
+static bool poweroff_force;
+
+static void poweroff_work_func(struct work_struct *work)
+{
+ __orderly_poweroff(poweroff_force);
+}
+
+static DECLARE_WORK(poweroff_work, poweroff_work_func);
+
/**
* orderly_poweroff - Trigger an orderly system poweroff
* @force: force poweroff if command execution fails
*/
int orderly_poweroff(bool force)
{
- int ret = __orderly_poweroff();
-
- if (ret && force) {
- printk(KERN_WARNING "Failed to start orderly shutdown: "
- "forcing the issue\n");
-
- /*
- * I guess this should try to kick off some daemon to sync and
- * poweroff asap. Or not even bother syncing if we're doing an
- * emergency shutdown?
- */
- emergency_sync();
- kernel_power_off();
- }
-
- return ret;
+ if (force) /* do not override the pending "true" */
+ poweroff_force = true;
+ schedule_work(&poweroff_work);
+ return 0;
}
EXPORT_SYMBOL_GPL(orderly_poweroff);
*/
int tick_check_broadcast_device(struct clock_event_device *dev)
{
- if ((tick_broadcast_device.evtdev &&
+ if ((dev->features & CLOCK_EVT_FEAT_DUMMY) ||
+ (tick_broadcast_device.evtdev &&
tick_broadcast_device.evtdev->rating >= dev->rating) ||
(dev->features & CLOCK_EVT_FEAT_C3STOP))
return 0;
def_bool n
config DYNAMIC_FTRACE
- bool "enable/disable ftrace tracepoints dynamically"
+ bool "enable/disable function tracing dynamically"
depends on FUNCTION_TRACER
depends on HAVE_DYNAMIC_FTRACE
default y
help
- This option will modify all the calls to ftrace dynamically
- (will patch them out of the binary image and replace them
- with a No-Op instruction) as they are called. A table is
- created to dynamically enable them again.
+ This option will modify all the calls to function tracing
+ dynamically (will patch them out of the binary image and
+ replace them with a No-Op instruction) on boot up. During
+ compile time, a table is made of all the locations that ftrace
+ can function trace, and this table is linked into the kernel
+ image. When this is enabled, functions can be individually
+ enabled, and the functions not enabled will not affect
+ performance of the system.
+
+ See the files in /sys/kernel/debug/tracing:
+ available_filter_functions
+ set_ftrace_filter
+ set_ftrace_notrace
This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but
otherwise has native performance as long as no tracing is active.
- The changes to the code are done by a kernel thread that
- wakes up once a second and checks to see if any ftrace calls
- were made. If so, it runs stop_machine (stops all CPUS)
- and modifies the code to jump over the call to ftrace.
-
config DYNAMIC_FTRACE_WITH_REGS
def_bool y
depends on DYNAMIC_FTRACE
continue;
}
- hlist_del(&entry->node);
- call_rcu(&entry->rcu, ftrace_free_entry_rcu);
+ hlist_del_rcu(&entry->node);
+ call_rcu_sched(&entry->rcu, ftrace_free_entry_rcu);
}
}
__disable_ftrace_function_probe();
void
update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu)
{
- struct ring_buffer *buf = tr->buffer;
+ struct ring_buffer *buf;
if (trace_stop_count)
return;
arch_spin_lock(&ftrace_max_lock);
+ buf = tr->buffer;
tr->buffer = max_tr.buffer;
max_tr.buffer = buf;
seq_printf(m, "# MAY BE MISSING FUNCTION EVENTS\n");
}
+#ifdef CONFIG_TRACER_MAX_TRACE
+static void print_snapshot_help(struct seq_file *m, struct trace_iterator *iter)
+{
+ if (iter->trace->allocated_snapshot)
+ seq_printf(m, "#\n# * Snapshot is allocated *\n#\n");
+ else
+ seq_printf(m, "#\n# * Snapshot is freed *\n#\n");
+
+ seq_printf(m, "# Snapshot commands:\n");
+ seq_printf(m, "# echo 0 > snapshot : Clears and frees snapshot buffer\n");
+ seq_printf(m, "# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.\n");
+ seq_printf(m, "# Takes a snapshot of the main buffer.\n");
+ seq_printf(m, "# echo 2 > snapshot : Clears snapshot buffer (but does not allocate)\n");
+ seq_printf(m, "# (Doesn't have to be '2' works with any number that\n");
+ seq_printf(m, "# is not a '0' or '1')\n");
+}
+#else
+/* Should never be called */
+static inline void print_snapshot_help(struct seq_file *m, struct trace_iterator *iter) { }
+#endif
+
static int s_show(struct seq_file *m, void *v)
{
struct trace_iterator *iter = v;
seq_puts(m, "#\n");
test_ftrace_alive(m);
}
- if (iter->trace && iter->trace->print_header)
+ if (iter->snapshot && trace_empty(iter))
+ print_snapshot_help(m, iter);
+ else if (iter->trace && iter->trace->print_header)
iter->trace->print_header(m);
else
trace_default_header(m);
return -EINVAL;
}
-static void set_tracer_flags(unsigned int mask, int enabled)
+/* Some tracers require overwrite to stay enabled */
+int trace_keep_overwrite(struct tracer *tracer, u32 mask, int set)
+{
+ if (tracer->enabled && (mask & TRACE_ITER_OVERWRITE) && !set)
+ return -1;
+
+ return 0;
+}
+
+int set_tracer_flag(unsigned int mask, int enabled)
{
/* do nothing if flag is already set */
if (!!(trace_flags & mask) == !!enabled)
- return;
+ return 0;
+
+ /* Give the tracer a chance to approve the change */
+ if (current_trace->flag_changed)
+ if (current_trace->flag_changed(current_trace, mask, !!enabled))
+ return -EINVAL;
if (enabled)
trace_flags |= mask;
if (mask == TRACE_ITER_RECORD_CMD)
trace_event_enable_cmd_record(enabled);
- if (mask == TRACE_ITER_OVERWRITE)
+ if (mask == TRACE_ITER_OVERWRITE) {
ring_buffer_change_overwrite(global_trace.buffer, enabled);
+#ifdef CONFIG_TRACER_MAX_TRACE
+ ring_buffer_change_overwrite(max_tr.buffer, enabled);
+#endif
+ }
if (mask == TRACE_ITER_PRINTK)
trace_printk_start_stop_comm(enabled);
+
+ return 0;
}
static int trace_set_options(char *option)
{
char *cmp;
int neg = 0;
- int ret = 0;
+ int ret = -ENODEV;
int i;
cmp = strstrip(option);
cmp += 2;
}
+ mutex_lock(&trace_types_lock);
+
for (i = 0; trace_options[i]; i++) {
if (strcmp(cmp, trace_options[i]) == 0) {
- set_tracer_flags(1 << i, !neg);
+ ret = set_tracer_flag(1 << i, !neg);
break;
}
}
/* If no option could be set, test the specific tracer options */
- if (!trace_options[i]) {
- mutex_lock(&trace_types_lock);
+ if (!trace_options[i])
ret = set_tracer_option(current_trace, cmp, neg);
- mutex_unlock(&trace_types_lock);
- }
+
+ mutex_unlock(&trace_types_lock);
return ret;
}
size_t cnt, loff_t *ppos)
{
char buf[64];
+ int ret;
if (cnt >= sizeof(buf))
return -EINVAL;
buf[cnt] = 0;
- trace_set_options(buf);
+ ret = trace_set_options(buf);
+ if (ret < 0)
+ return ret;
*ppos += cnt;
goto out;
trace_branch_disable();
+
+ current_trace->enabled = false;
+
if (current_trace->reset)
current_trace->reset(tr);
}
current_trace = t;
+ current_trace->enabled = true;
trace_branch_enable(tr);
out:
mutex_unlock(&trace_types_lock);
default:
if (current_trace->allocated_snapshot)
tracing_reset_online_cpus(&max_tr);
- else
- ret = -EINVAL;
break;
}
if (val != 0 && val != 1)
return -EINVAL;
- set_tracer_flags(1 << index, val);
+
+ mutex_lock(&trace_types_lock);
+ ret = set_tracer_flag(1 << index, val);
+ mutex_unlock(&trace_types_lock);
+
+ if (ret < 0)
+ return ret;
*ppos += cnt;
enum print_line_t (*print_line)(struct trace_iterator *iter);
/* If you handled the flag setting, return 0 */
int (*set_flag)(u32 old_flags, u32 bit, int set);
+ /* Return 0 if OK with change, else return non-zero */
+ int (*flag_changed)(struct tracer *tracer,
+ u32 mask, int set);
struct tracer *next;
struct tracer_flags *flags;
bool print_max;
bool use_max_tr;
bool allocated_snapshot;
+ bool enabled;
};
void trace_printk_init_buffers(void);
void trace_printk_start_comm(void);
+int trace_keep_overwrite(struct tracer *tracer, u32 mask, int set);
+int set_tracer_flag(unsigned int mask, int enabled);
#undef FTRACE_ENTRY
#define FTRACE_ENTRY(call, struct_name, id, tstruct, print, filter) \
static int trace_type __read_mostly;
-static int save_lat_flag;
+static int save_flags;
static void stop_irqsoff_tracer(struct trace_array *tr, int graph);
static int start_irqsoff_tracer(struct trace_array *tr, int graph);
static void __irqsoff_tracer_init(struct trace_array *tr)
{
- save_lat_flag = trace_flags & TRACE_ITER_LATENCY_FMT;
- trace_flags |= TRACE_ITER_LATENCY_FMT;
+ save_flags = trace_flags;
+
+ /* non overwrite screws up the latency tracers */
+ set_tracer_flag(TRACE_ITER_OVERWRITE, 1);
+ set_tracer_flag(TRACE_ITER_LATENCY_FMT, 1);
tracing_max_latency = 0;
irqsoff_trace = tr;
static void irqsoff_tracer_reset(struct trace_array *tr)
{
+ int lat_flag = save_flags & TRACE_ITER_LATENCY_FMT;
+ int overwrite_flag = save_flags & TRACE_ITER_OVERWRITE;
+
stop_irqsoff_tracer(tr, is_graph());
- if (!save_lat_flag)
- trace_flags &= ~TRACE_ITER_LATENCY_FMT;
+ set_tracer_flag(TRACE_ITER_LATENCY_FMT, lat_flag);
+ set_tracer_flag(TRACE_ITER_OVERWRITE, overwrite_flag);
}
static void irqsoff_tracer_start(struct trace_array *tr)
.print_line = irqsoff_print_line,
.flags = &tracer_flags,
.set_flag = irqsoff_set_flag,
+ .flag_changed = trace_keep_overwrite,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_irqsoff,
#endif
.print_line = irqsoff_print_line,
.flags = &tracer_flags,
.set_flag = irqsoff_set_flag,
+ .flag_changed = trace_keep_overwrite,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_preemptoff,
#endif
.print_line = irqsoff_print_line,
.flags = &tracer_flags,
.set_flag = irqsoff_set_flag,
+ .flag_changed = trace_keep_overwrite,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_preemptirqsoff,
#endif
static int wakeup_graph_entry(struct ftrace_graph_ent *trace);
static void wakeup_graph_return(struct ftrace_graph_ret *trace);
-static int save_lat_flag;
+static int save_flags;
#define TRACE_DISPLAY_GRAPH 1
static int __wakeup_tracer_init(struct trace_array *tr)
{
- save_lat_flag = trace_flags & TRACE_ITER_LATENCY_FMT;
- trace_flags |= TRACE_ITER_LATENCY_FMT;
+ save_flags = trace_flags;
+
+ /* non overwrite screws up the latency tracers */
+ set_tracer_flag(TRACE_ITER_OVERWRITE, 1);
+ set_tracer_flag(TRACE_ITER_LATENCY_FMT, 1);
tracing_max_latency = 0;
wakeup_trace = tr;
static void wakeup_tracer_reset(struct trace_array *tr)
{
+ int lat_flag = save_flags & TRACE_ITER_LATENCY_FMT;
+ int overwrite_flag = save_flags & TRACE_ITER_OVERWRITE;
+
stop_wakeup_tracer(tr);
/* make sure we put back any tasks we are tracing */
wakeup_reset(tr);
- if (!save_lat_flag)
- trace_flags &= ~TRACE_ITER_LATENCY_FMT;
+ set_tracer_flag(TRACE_ITER_LATENCY_FMT, lat_flag);
+ set_tracer_flag(TRACE_ITER_OVERWRITE, overwrite_flag);
}
static void wakeup_tracer_start(struct trace_array *tr)
.print_line = wakeup_print_line,
.flags = &tracer_flags,
.set_flag = wakeup_set_flag,
+ .flag_changed = trace_keep_overwrite,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_wakeup,
#endif
.print_line = wakeup_print_line,
.flags = &tracer_flags,
.set_flag = wakeup_set_flag,
+ .flag_changed = trace_keep_overwrite,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_wakeup,
#endif
.owner = GLOBAL_ROOT_UID,
.group = GLOBAL_ROOT_GID,
.proc_inum = PROC_USER_INIT_INO,
+ .may_mount_sysfs = true,
+ .may_mount_proc = true,
};
EXPORT_SYMBOL_GPL(init_user_ns);
#include <linux/uaccess.h>
#include <linux/ctype.h>
#include <linux/projid.h>
+#include <linux/fs_struct.h>
static struct kmem_cache *user_ns_cachep __read_mostly;
kgid_t group = new->egid;
int ret;
+ /*
+ * Verify that we can not violate the policy of which files
+ * may be accessed that is specified by the root directory,
+ * by verifing that the root directory is at the root of the
+ * mount namespace which allows all files to be accessed.
+ */
+ if (current_chrooted())
+ return -EPERM;
+
/* The creator needs a mapping in the parent user namespace
* or else we won't be able to reasonably tell userspace who
* created a user_namespace.
set_cred_user_ns(new, ns);
+ update_mnt_policy(ns);
+
return 0;
}
if (atomic_read(¤t->mm->mm_users) > 1)
return -EINVAL;
+ if (current->fs->users != 1)
+ return -EINVAL;
+
if (!ns_capable(user_ns, CAP_SYS_ADMIN))
return -EPERM;
int ret;
mutex_lock(&worker_pool_idr_mutex);
- idr_pre_get(&worker_pool_idr, GFP_KERNEL);
- ret = idr_get_new(&worker_pool_idr, pool, &pool->id);
+ ret = idr_alloc(&worker_pool_idr, pool, 0, 0, GFP_KERNEL);
+ if (ret >= 0)
+ pool->id = ret;
mutex_unlock(&worker_pool_idr_mutex);
- return ret;
+ return ret < 0 ? ret : 0;
}
/*
spin_unlock_irq(&pool->lock);
mutex_unlock(&pool->assoc_mutex);
- }
- /*
- * Call schedule() so that we cross rq->lock and thus can guarantee
- * sched callbacks see the %WORKER_UNBOUND flag. This is necessary
- * as scheduler callbacks may be invoked from other cpus.
- */
- schedule();
+ /*
+ * Call schedule() so that we cross rq->lock and thus can
+ * guarantee sched callbacks see the %WORKER_UNBOUND flag.
+ * This is necessary as scheduler callbacks may be invoked
+ * from other cpus.
+ */
+ schedule();
- /*
- * Sched callbacks are disabled now. Zap nr_running. After this,
- * nr_running stays zero and need_more_worker() and keep_working()
- * are always true as long as the worklist is not empty. Pools on
- * @cpu now behave as unbound (in terms of concurrency management)
- * pools which are served by workers tied to the CPU.
- *
- * On return from this function, the current worker would trigger
- * unbound chain execution of pending work items if other workers
- * didn't already.
- */
- for_each_std_worker_pool(pool, cpu)
+ /*
+ * Sched callbacks are disabled now. Zap nr_running.
+ * After this, nr_running stays zero and need_more_worker()
+ * and keep_working() are always true as long as the
+ * worklist is not empty. This pool now behaves as an
+ * unbound (in terms of concurrency management) pool which
+ * are served by workers tied to the pool.
+ */
atomic_set(&pool->nr_running, 0);
+
+ /*
+ * With concurrency management just turned off, a busy
+ * worker blocking could lead to lengthy stalls. Kick off
+ * unbound chain execution of currently pending work items.
+ */
+ spin_lock_irq(&pool->lock);
+ wake_up_worker(pool);
+ spin_unlock_irq(&pool->lock);
+ }
}
/*
*/
#include <linux/kernel.h>
+#include <linux/printk.h>
#include <linux/spinlock.h>
#include <linux/tty.h>
#include <linux/wait.h>
wake_up_klogd();
}
}
-
-
entry = bucket_find_exact(bucket, ref);
if (!entry) {
+ /* must drop lock before calling dma_mapping_error */
+ put_hash_bucket(bucket, &flags);
+
if (dma_mapping_error(ref->dev, ref->dev_addr)) {
err_printk(ref->dev, NULL,
- "DMA-API: device driver tries "
- "to free an invalid DMA memory address\n");
- return;
+ "DMA-API: device driver tries to free an "
+ "invalid DMA memory address\n");
+ } else {
+ err_printk(ref->dev, NULL,
+ "DMA-API: device driver tries to free DMA "
+ "memory it has not allocated [device "
+ "address=0x%016llx] [size=%llu bytes]\n",
+ ref->dev_addr, ref->size);
}
- err_printk(ref->dev, NULL, "DMA-API: device driver tries "
- "to free DMA memory it has not allocated "
- "[device address=0x%016llx] [size=%llu bytes]\n",
- ref->dev_addr, ref->size);
- goto out;
+ return;
}
if (ref->size != entry->size) {
hash_bucket_del(entry);
dma_entry_free(entry);
-out:
put_hash_bucket(bucket, &flags);
}
ref.dev = dev;
ref.dev_addr = dma_addr;
bucket = get_hash_bucket(&ref, &flags);
- entry = bucket_find_exact(bucket, &ref);
- if (!entry)
- goto out;
+ list_for_each_entry(entry, &bucket->list, list) {
+ if (!exact_match(&ref, entry))
+ continue;
+
+ /*
+ * The same physical address can be mapped multiple
+ * times. Without a hardware IOMMU this results in the
+ * same device addresses being put into the dma-debug
+ * hash multiple times too. This can result in false
+ * positives being reported. Therefore we implement a
+ * best-fit algorithm here which updates the first entry
+ * from the hash which fits the reference value and is
+ * not currently listed as being checked.
+ */
+ if (entry->map_err_type == MAP_ERR_NOT_CHECKED) {
+ entry->map_err_type = MAP_ERR_CHECKED;
+ break;
+ }
+ }
- entry->map_err_type = MAP_ERR_CHECKED;
-out:
put_hash_bucket(bucket, &flags);
}
EXPORT_SYMBOL(debug_dma_mapping_error);
if (layer_idr)
return get_from_free_list(layer_idr);
- /* try to allocate directly from kmem_cache */
- new = kmem_cache_zalloc(idr_layer_cache, gfp_mask);
+ /*
+ * Try to allocate directly from kmem_cache. We want to try this
+ * before preload buffer; otherwise, non-preloading idr_alloc()
+ * users will end up taking advantage of preloading ones. As the
+ * following is allowed to fail for preloaded cases, suppress
+ * warning this time.
+ */
+ new = kmem_cache_zalloc(idr_layer_cache, gfp_mask | __GFP_NOWARN);
if (new)
return new;
* Try to fetch one from the per-cpu preload buffer if in process
* context. See idr_preload() for details.
*/
- if (in_interrupt())
- return NULL;
-
- preempt_disable();
- new = __this_cpu_read(idr_preload_head);
- if (new) {
- __this_cpu_write(idr_preload_head, new->ary[0]);
- __this_cpu_dec(idr_preload_cnt);
- new->ary[0] = NULL;
+ if (!in_interrupt()) {
+ preempt_disable();
+ new = __this_cpu_read(idr_preload_head);
+ if (new) {
+ __this_cpu_write(idr_preload_head, new->ary[0]);
+ __this_cpu_dec(idr_preload_cnt);
+ new->ary[0] = NULL;
+ }
+ preempt_enable();
+ if (new)
+ return new;
}
- preempt_enable();
- return new;
+
+ /*
+ * Both failed. Try kmem_cache again w/o adding __GFP_NOWARN so
+ * that memory allocation failure warning is printed as intended.
+ */
+ return kmem_cache_zalloc(idr_layer_cache, gfp_mask);
}
static void idr_layer_rcu_free(struct rcu_head *head)
}
}
-/**
- * idr_pre_get - reserve resources for idr allocation
- * @idp: idr handle
- * @gfp_mask: memory allocation flags
- *
- * This function should be called prior to calling the idr_get_new* functions.
- * It preallocates enough memory to satisfy the worst possible allocation. The
- * caller should pass in GFP_KERNEL if possible. This of course requires that
- * no spinning locks be held.
- *
- * If the system is REALLY out of memory this function returns %0,
- * otherwise %1.
- */
-int idr_pre_get(struct idr *idp, gfp_t gfp_mask)
+int __idr_pre_get(struct idr *idp, gfp_t gfp_mask)
{
while (idp->id_free_cnt < MAX_IDR_FREE) {
struct idr_layer *new;
}
return 1;
}
-EXPORT_SYMBOL(idr_pre_get);
+EXPORT_SYMBOL(__idr_pre_get);
/**
* sub_alloc - try to allocate an id without growing the tree depth
* @idp: idr handle
* @starting_id: id to start search at
- * @id: pointer to the allocated handle
* @pa: idr_layer[MAX_IDR_LEVEL] used as backtrack buffer
* @gfp_mask: allocation mask for idr_layer_alloc()
* @layer_idr: optional idr passed to idr_layer_alloc()
idr_mark_full(pa, id);
}
-/**
- * idr_get_new_above - allocate new idr entry above or equal to a start id
- * @idp: idr handle
- * @ptr: pointer you want associated with the id
- * @starting_id: id to start search at
- * @id: pointer to the allocated handle
- *
- * This is the allocate id function. It should be called with any
- * required locks.
- *
- * If allocation from IDR's private freelist fails, idr_get_new_above() will
- * return %-EAGAIN. The caller should retry the idr_pre_get() call to refill
- * IDR's preallocation and then retry the idr_get_new_above() call.
- *
- * If the idr is full idr_get_new_above() will return %-ENOSPC.
- *
- * @id returns a value in the range @starting_id ... %0x7fffffff
- */
-int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
+int __idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
{
struct idr_layer *pa[MAX_IDR_LEVEL + 1];
int rv;
*id = rv;
return 0;
}
-EXPORT_SYMBOL(idr_get_new_above);
+EXPORT_SYMBOL(__idr_get_new_above);
/**
* idr_preload - preload for idr_alloc()
int ida_pre_get(struct ida *ida, gfp_t gfp_mask)
{
/* allocate idr_layers */
- if (!idr_pre_get(&ida->idr, gfp_mask))
+ if (!__idr_pre_get(&ida->idr, gfp_mask))
return 0;
/* allocate free_bitmap */
config XZ_DEC_POWERPC
bool "PowerPC BCJ filter decoder"
- default y if POWERPC
+ default y if PPC
select XZ_DEC_BCJ
config XZ_DEC_IA64
default "1"
config VIRT_TO_BUS
- def_bool y
- depends on HAVE_VIRT_TO_BUS
+ bool
+ help
+ An architecture should select this if it implements the
+ deprecated interface virt_to_bus(). All new architectures
+ should probably not select this.
+
config MMU_NOTIFIER
bool
struct vm_area_struct *vma;
int err = -EINVAL;
int has_write_lock = 0;
- vm_flags_t vm_flags;
+ vm_flags_t vm_flags = 0;
if (prot)
return err;
unsigned long addr;
struct file *file = get_file(vma->vm_file);
- vm_flags = vma->vm_flags;
- if (!(flags & MAP_NONBLOCK))
- vm_flags |= VM_POPULATE;
- addr = mmap_region(file, start, size, vm_flags, pgoff);
+ addr = mmap_region(file, start, size,
+ vma->vm_flags, pgoff);
fput(file);
if (IS_ERR_VALUE(addr)) {
err = addr;
mutex_unlock(&mapping->i_mmap_mutex);
}
- if (!(flags & MAP_NONBLOCK) && !(vma->vm_flags & VM_POPULATE)) {
- if (!has_write_lock)
- goto get_write_lock;
- vma->vm_flags |= VM_POPULATE;
- }
-
if (vma->vm_flags & VM_LOCKED) {
/*
* drop PG_Mlocked flag for over-mapped range
*/
out:
- vm_flags = vma->vm_flags;
+ if (vma)
+ vm_flags = vma->vm_flags;
if (likely(!has_write_lock))
up_read(&mm->mmap_sem);
else
/* Return the number pages of memory we physically have, in PAGE_SIZE units. */
unsigned long hugetlb_total_pages(void)
{
- struct hstate *h = &default_hstate;
- return h->nr_huge_pages * pages_per_huge_page(h);
+ struct hstate *h;
+ unsigned long nr_total_pages = 0;
+
+ for_each_hstate(h)
+ nr_total_pages += h->nr_huge_pages * pages_per_huge_page(h);
+ return nr_total_pages;
}
static int hugetlb_acct_memory(struct hstate *h, long delta)
for (i = 0; i < MAX_NR_ZONES; i++) {
struct zone *zone = pgdat->node_zones + i;
- if (zone->wait_table)
+ /*
+ * wait_table may be allocated from boot memory,
+ * here only free if it's allocated by vmalloc.
+ */
+ if (is_vmalloc_addr(zone->wait_table))
vfree(zone->wait_table);
}
int retry = 1;
start_pfn = PFN_DOWN(start);
- end_pfn = start_pfn + PFN_DOWN(size);
+ end_pfn = PFN_UP(start + size - 1);
/*
* When CONFIG_MEMCG is on, one memory block may be used by other
newflags = vma->vm_flags & ~VM_LOCKED;
if (on)
- newflags |= VM_LOCKED | VM_POPULATE;
+ newflags |= VM_LOCKED;
tmp = vma->vm_end;
if (tmp > end)
* range with the first VMA. Also, skip undesirable VMA types.
*/
nend = min(end, vma->vm_end);
- if ((vma->vm_flags & (VM_IO | VM_PFNMAP | VM_POPULATE)) !=
- VM_POPULATE)
+ if (vma->vm_flags & (VM_IO | VM_PFNMAP))
continue;
if (nstart < vma->vm_start)
nstart = vma->vm_start;
struct vm_area_struct * vma, * prev = NULL;
if (flags & MCL_FUTURE)
- current->mm->def_flags |= VM_LOCKED | VM_POPULATE;
+ current->mm->def_flags |= VM_LOCKED;
else
- current->mm->def_flags &= ~(VM_LOCKED | VM_POPULATE);
+ current->mm->def_flags &= ~VM_LOCKED;
if (flags == MCL_FUTURE)
goto out;
newflags = vma->vm_flags & ~VM_LOCKED;
if (flags & MCL_CURRENT)
- newflags |= VM_LOCKED | VM_POPULATE;
+ newflags |= VM_LOCKED;
/* Ignore errors */
mlock_fixup(vma, &prev, vma->vm_start, vma->vm_end, newflags);
}
addr = mmap_region(file, addr, len, vm_flags, pgoff);
- if (!IS_ERR_VALUE(addr) && (vm_flags & VM_POPULATE))
+ if (!IS_ERR_VALUE(addr) &&
+ ((vm_flags & VM_LOCKED) ||
+ (flags & (MAP_POPULATE | MAP_NONBLOCK)) == MAP_POPULATE))
*populate = len;
return addr;
}
/* Check the cache first. */
/* (Cache hit rate is typically around 35%.) */
- vma = mm->mmap_cache;
+ vma = ACCESS_ONCE(mm->mmap_cache);
if (!(vma && vma->vm_end > addr && vma->vm_start <= addr)) {
struct rb_node *rb_node;
struct vm_area_struct *vma;
/* check the cache first */
- vma = mm->mmap_cache;
+ vma = ACCESS_ONCE(mm->mmap_cache);
if (vma && vma->vm_start <= addr && vma->vm_end > addr)
return vma;
if (flags != 0)
return -EINVAL;
- if (!access_ok(VERIFY_READ, lvec, liovcnt * sizeof(*lvec)))
- goto out;
-
- if (!access_ok(VERIFY_READ, rvec, riovcnt * sizeof(*rvec)))
- goto out;
-
if (vm_write)
rc = compat_rw_copy_check_uvector(WRITE, lvec, liovcnt,
UIO_FASTIOV, iovstack_l,
kfree(iov_r);
if (iov_l != iovstack_l)
kfree(iov_l);
-
-out:
return rc;
}
grp = &vlan_info->grp;
- /* Take it out of our own structures, but be sure to interlock with
- * HW accelerating devices or SW vlan input packet processing if
- * VLAN is not 0 (leave it there for 802.1p).
- */
- if (vlan_id)
- vlan_vid_del(real_dev, vlan_id);
-
grp->nr_vlan_devs--;
if (vlan->flags & VLAN_FLAG_MVRP)
vlan_gvrp_uninit_applicant(real_dev);
}
+ /* Take it out of our own structures, but be sure to interlock with
+ * HW accelerating devices or SW vlan input packet processing if
+ * VLAN is not 0 (leave it there for 802.1p).
+ */
+ if (vlan_id)
+ vlan_vid_del(real_dev, vlan_id);
+
/* Get rid of the vlan's reference to real_dev */
dev_put(real_dev);
}
batadv_ogm_packet = (struct batadv_ogm_packet *)packet_buff;
/* unpack the aggregated packets and process them one by one */
- do {
+ while (batadv_iv_ogm_aggr_packet(buff_pos, packet_len,
+ batadv_ogm_packet->tt_num_changes)) {
tt_buff = packet_buff + buff_pos + BATADV_OGM_HLEN;
batadv_iv_ogm_process(ethhdr, batadv_ogm_packet, tt_buff,
packet_pos = packet_buff + buff_pos;
batadv_ogm_packet = (struct batadv_ogm_packet *)packet_pos;
- } while (batadv_iv_ogm_aggr_packet(buff_pos, packet_len,
- batadv_ogm_packet->tt_num_changes));
+ }
kfree_skb(skb);
return NET_RX_SUCCESS;
sco_chan_del(sk, ECONNRESET);
break;
+ case BT_CONNECT2:
case BT_CONNECT:
case BT_DISCONN:
sco_chan_del(sk, ECONNRESET);
goto out;
}
- mdst = br_mdb_get(br, skb);
+ mdst = br_mdb_get(br, skb, vid);
if (mdst || BR_INPUT_SKB_CB_MROUTERS_ONLY(skb))
br_multicast_deliver(mdst, skb);
else
return 0;
br_warn(br, "adding interface %s with same address "
"as a received packet\n",
- source->dev->name);
+ source ? source->dev->name : br->dev->name);
fdb_delete(br, fdb);
}
if (is_broadcast_ether_addr(dest))
skb2 = skb;
else if (is_multicast_ether_addr(dest)) {
- mdst = br_mdb_get(br, skb);
+ mdst = br_mdb_get(br, skb, vid);
if (mdst || BR_INPUT_SKB_CB_MROUTERS_ONLY(skb)) {
if ((mdst && mdst->mglist) ||
br_multicast_is_router(br))
port = p->port;
if (port) {
struct br_mdb_entry e;
+ memset(&e, 0, sizeof(e));
e.ifindex = port->dev->ifindex;
e.state = p->state;
if (p->addr.proto == htons(ETH_P_IP))
break;
bpm = nlmsg_data(nlh);
+ memset(bpm, 0, sizeof(*bpm));
bpm->ifindex = dev->ifindex;
if (br_mdb_fill_info(skb, cb, dev) < 0)
goto out;
return -EMSGSIZE;
bpm = nlmsg_data(nlh);
+ memset(bpm, 0, sizeof(*bpm));
bpm->family = AF_BRIDGE;
bpm->ifindex = dev->ifindex;
nest = nla_nest_start(skb, MDBA_MDB);
{
struct br_mdb_entry entry;
+ memset(&entry, 0, sizeof(entry));
entry.ifindex = port->dev->ifindex;
entry.addr.proto = group->proto;
entry.addr.u.ip4 = group->u.ip4;
#endif
struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
- struct sk_buff *skb)
+ struct sk_buff *skb, u16 vid)
{
struct net_bridge_mdb_htable *mdb = rcu_dereference(br->mdb);
struct br_ip ip;
return NULL;
ip.proto = skb->protocol;
+ ip.vid = vid;
switch (skb->protocol) {
case htons(ETH_P_IP):
+ nla_total_size(1) /* IFLA_BRPORT_MODE */
+ nla_total_size(1) /* IFLA_BRPORT_GUARD */
+ nla_total_size(1) /* IFLA_BRPORT_PROTECT */
+ + nla_total_size(1) /* IFLA_BRPORT_FAST_LEAVE */
+ 0;
}
br_set_port_flag(p, tb, IFLA_BRPORT_MODE, BR_HAIRPIN_MODE);
br_set_port_flag(p, tb, IFLA_BRPORT_GUARD, BR_BPDU_GUARD);
br_set_port_flag(p, tb, IFLA_BRPORT_FAST_LEAVE, BR_MULTICAST_FAST_LEAVE);
+ br_set_port_flag(p, tb, IFLA_BRPORT_PROTECT, BR_ROOT_BLOCK);
if (tb[IFLA_BRPORT_COST]) {
err = br_stp_set_path_cost(p, nla_get_u32(tb[IFLA_BRPORT_COST]));
struct net_bridge_port *port,
struct sk_buff *skb);
extern struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
- struct sk_buff *skb);
+ struct sk_buff *skb, u16 vid);
extern void br_multicast_add_port(struct net_bridge_port *port);
extern void br_multicast_del_port(struct net_bridge_port *port);
extern void br_multicast_enable_port(struct net_bridge_port *port);
}
static inline struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
- struct sk_buff *skb)
+ struct sk_buff *skb, u16 vid)
{
return NULL;
}
return 0;
}
+static int __decode_pgid(void **p, void *end, struct ceph_pg *pg)
+{
+ u8 v;
+
+ ceph_decode_need(p, end, 1+8+4+4, bad);
+ v = ceph_decode_8(p);
+ if (v != 1)
+ goto bad;
+ pg->pool = ceph_decode_64(p);
+ pg->seed = ceph_decode_32(p);
+ *p += 4; /* skip preferred */
+ return 0;
+
+bad:
+ dout("error decoding pgid\n");
+ return -EINVAL;
+}
+
/*
* decode a full map.
*/
for (i = 0; i < len; i++) {
int n, j;
struct ceph_pg pgid;
- struct ceph_pg_v1 pgid_v1;
struct ceph_pg_mapping *pg;
- ceph_decode_need(p, end, sizeof(u32) + sizeof(u64), bad);
- ceph_decode_copy(p, &pgid_v1, sizeof(pgid_v1));
- pgid.pool = le32_to_cpu(pgid_v1.pool);
- pgid.seed = le16_to_cpu(pgid_v1.ps);
+ err = __decode_pgid(p, end, &pgid);
+ if (err)
+ goto bad;
+ ceph_decode_need(p, end, sizeof(u32), bad);
n = ceph_decode_32(p);
err = -EINVAL;
if (n > (UINT_MAX - sizeof(*pg)) / sizeof(u32))
u16 version;
ceph_decode_16_safe(p, end, version, bad);
- if (version > 6) {
- pr_warning("got unknown v %d > %d of inc osdmap\n", version, 6);
+ if (version != 6) {
+ pr_warning("got unknown v %d != 6 of inc osdmap\n", version);
goto bad;
}
while (len--) {
struct ceph_pg_mapping *pg;
int j;
- struct ceph_pg_v1 pgid_v1;
struct ceph_pg pgid;
u32 pglen;
- ceph_decode_need(p, end, sizeof(u64) + sizeof(u32), bad);
- ceph_decode_copy(p, &pgid_v1, sizeof(pgid_v1));
- pgid.pool = le32_to_cpu(pgid_v1.pool);
- pgid.seed = le16_to_cpu(pgid_v1.ps);
- pglen = ceph_decode_32(p);
+ err = __decode_pgid(p, end, &pgid);
+ if (err)
+ goto bad;
+ ceph_decode_need(p, end, sizeof(u32), bad);
+ pglen = ceph_decode_32(p);
if (pglen) {
ceph_decode_need(p, end, pglen*sizeof(u32), bad);
return;
}
#endif
- WARN_ON(in_interrupt());
static_key_slow_inc(&netstamp_needed);
}
EXPORT_SYMBOL(net_enable_timestamp);
}
skb_orphan(skb);
- nf_reset(skb);
if (unlikely(!is_skb_forwardable(dev, skb))) {
atomic_long_inc(&dev->rx_dropped);
skb->mark = 0;
secpath_reset(skb);
nf_reset(skb);
+ nf_reset_trace(skb);
return netif_rx(skb);
}
EXPORT_SYMBOL_GPL(dev_forward_skb);
struct sk_buff *segs = ERR_PTR(-EPROTONOSUPPORT);
struct packet_offload *ptype;
__be16 type = skb->protocol;
+ int vlan_depth = ETH_HLEN;
while (type == htons(ETH_P_8021Q)) {
- int vlan_depth = ETH_HLEN;
struct vlan_hdr *vh;
if (unlikely(!pskb_may_pull(skb, vlan_depth + VLAN_HLEN)))
if (dev->rx_handler)
return -EBUSY;
+ /* Note: rx_handler_data must be set before rx_handler */
rcu_assign_pointer(dev->rx_handler_data, rx_handler_data);
rcu_assign_pointer(dev->rx_handler, rx_handler);
ASSERT_RTNL();
RCU_INIT_POINTER(dev->rx_handler, NULL);
+ /* a reader seeing a non NULL rx_handler in a rcu_read_lock()
+ * section has a guarantee to see a non NULL rx_handler_data
+ * as well.
+ */
+ synchronize_net();
RCU_INIT_POINTER(dev->rx_handler_data, NULL);
}
EXPORT_SYMBOL_GPL(netdev_rx_handler_unregister);
}
switch (rx_handler(&skb)) {
case RX_HANDLER_CONSUMED:
+ ret = NET_RX_SUCCESS;
goto unlock;
case RX_HANDLER_ANOTHER:
goto another_round;
* Allow this to run for 2 jiffies since which will allow
* an average latency of 1.5/HZ.
*/
- if (unlikely(budget <= 0 || time_after(jiffies, time_limit)))
+ if (unlikely(budget <= 0 || time_after_eq(jiffies, time_limit)))
goto softnet_break;
local_irq_enable();
/**
* dev_change_carrier - Change device carrier
* @dev: device
- * @new_carries: new value
+ * @new_carrier: new value
*
* Change device carrier
*/
ha->type = addr_type;
ha->refcount = 1;
ha->global_use = global;
- ha->synced = false;
+ ha->synced = 0;
list_add_tail_rcu(&ha->list, &list->list);
list->count++;
addr_len, ha->type);
if (err)
break;
- ha->synced = true;
+ ha->synced++;
ha->refcount++;
} else if (ha->refcount == 1) {
__hw_addr_del(to_list, ha->addr, addr_len, ha->type);
if (ha->synced) {
__hw_addr_del(to_list, ha->addr,
addr_len, ha->type);
- ha->synced = false;
+ ha->synced--;
__hw_addr_del(from_list, ha->addr,
addr_len, ha->type);
}
struct flow_flush_info *info = data;
struct tasklet_struct *tasklet;
- tasklet = this_cpu_ptr(&info->cache->percpu->flush_tasklet);
+ tasklet = &this_cpu_ptr(info->cache->percpu)->flush_tasklet;
tasklet->data = (unsigned long)info;
tasklet_schedule(tasklet);
}
flow->ports = *ports;
}
+ flow->thoff = (u16) nhoff;
+
return true;
}
EXPORT_SYMBOL(skb_flow_dissect);
}
if (ops->fill_info) {
data = nla_nest_start(skb, IFLA_INFO_DATA);
- if (data == NULL)
+ if (data == NULL) {
+ err = -EMSGSIZE;
goto err_cancel_link;
+ }
err = ops->fill_info(skb, dev);
if (err < 0)
goto err_cancel_data;
* report anything.
*/
ivi.spoofchk = -1;
+ memset(ivi.mac, 0, sizeof(ivi.mac));
if (dev->netdev_ops->ndo_get_vf_config(dev, i, &ivi))
break;
vf_mac.vf =
struct rtattr *attr = (void *)nlh + NLMSG_ALIGN(min_len);
while (RTA_OK(attr, attrlen)) {
- unsigned int flavor = attr->rta_type;
+ unsigned int flavor = attr->rta_type & NLA_TYPE_MASK;
if (flavor) {
if (flavor > rta_max[sz_idx])
return -EINVAL;
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/security.h>
+#include <linux/pid_namespace.h>
#include <linux/pid.h>
#include <linux/nsproxy.h>
#include <linux/slab.h>
if (!uid_valid(uid) || !gid_valid(gid))
return -EINVAL;
- if ((creds->pid == task_tgid_vnr(current) || nsown_capable(CAP_SYS_ADMIN)) &&
+ if ((creds->pid == task_tgid_vnr(current) ||
+ ns_capable(current->nsproxy->pid_ns->user_ns, CAP_SYS_ADMIN)) &&
((uid_eq(uid, cred->uid) || uid_eq(uid, cred->euid) ||
uid_eq(uid, cred->suid)) || nsown_capable(CAP_SETUID)) &&
((gid_eq(gid, cred->gid) || gid_eq(gid, cred->egid) ||
if (!netdev->dcbnl_ops->getpermhwaddr)
return -EOPNOTSUPP;
+ memset(perm_addr, 0, sizeof(perm_addr));
netdev->dcbnl_ops->getpermhwaddr(netdev, perm_addr);
return nla_put(skb, DCB_ATTR_PERM_HWADDR, sizeof(perm_addr), perm_addr);
if (ops->ieee_getets) {
struct ieee_ets ets;
+ memset(&ets, 0, sizeof(ets));
err = ops->ieee_getets(netdev, &ets);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_ETS, sizeof(ets), &ets))
if (ops->ieee_getmaxrate) {
struct ieee_maxrate maxrate;
+ memset(&maxrate, 0, sizeof(maxrate));
err = ops->ieee_getmaxrate(netdev, &maxrate);
if (!err) {
err = nla_put(skb, DCB_ATTR_IEEE_MAXRATE,
if (ops->ieee_getpfc) {
struct ieee_pfc pfc;
+ memset(&pfc, 0, sizeof(pfc));
err = ops->ieee_getpfc(netdev, &pfc);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_PFC, sizeof(pfc), &pfc))
/* get peer info if available */
if (ops->ieee_peer_getets) {
struct ieee_ets ets;
+ memset(&ets, 0, sizeof(ets));
err = ops->ieee_peer_getets(netdev, &ets);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_PEER_ETS, sizeof(ets), &ets))
if (ops->ieee_peer_getpfc) {
struct ieee_pfc pfc;
+ memset(&pfc, 0, sizeof(pfc));
err = ops->ieee_peer_getpfc(netdev, &pfc);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_PEER_PFC, sizeof(pfc), &pfc))
/* peer info if available */
if (ops->cee_peer_getpg) {
struct cee_pg pg;
+ memset(&pg, 0, sizeof(pg));
err = ops->cee_peer_getpg(netdev, &pg);
if (!err &&
nla_put(skb, DCB_ATTR_CEE_PEER_PG, sizeof(pg), &pg))
if (ops->cee_peer_getpfc) {
struct cee_pfc pfc;
+ memset(&pfc, 0, sizeof(pfc));
err = ops->cee_peer_getpfc(netdev, &pfc);
if (!err &&
nla_put(skb, DCB_ATTR_CEE_PEER_PFC, sizeof(pfc), &pfc))
(memcmp(addr1, addr2, length >> 3) == 0)
/* local link, i.e. FE80::/10 */
-#define is_addr_link_local(a) (((a)->s6_addr16[0]) == 0x80FE)
+#define is_addr_link_local(a) (((a)->s6_addr16[0]) == htons(0xFE80))
/*
* check whether we can compress the IID to 16 bits,
iph->frag_off |= htons(IP_MF);
offset += (skb->len - skb->mac_len - iph->ihl * 4);
} else {
- if (!(iph->frag_off & htons(IP_DF)))
- iph->id = htons(id++);
+ iph->id = htons(id++);
}
iph->tot_len = htons(skb->len - skb->mac_len);
iph->check = 0;
if (nlh->nlmsg_flags & NLM_F_EXCL ||
!(nlh->nlmsg_flags & NLM_F_REPLACE))
return -EEXIST;
-
- set_ifa_lifetime(ifa_existing, valid_lft, prefered_lft);
+ ifa = ifa_existing;
+ set_ifa_lifetime(ifa, valid_lft, prefered_lft);
+ rtmsg_ifa(RTM_NEWADDR, ifa, nlh, NETLINK_CB(skb).portid);
+ blocking_notifier_call_chain(&inetaddr_chain, NETDEV_UP, ifa);
}
return 0;
}
* tcp/dccp_create_openreq_child().
*/
void inet_csk_prepare_forced_close(struct sock *sk)
+ __releases(&sk->sk_lock.slock)
{
/* sk_clone_lock locked the socket and set refcnt to 2 */
bh_unlock_sock(sk);
#include <linux/rtnetlink.h>
#include <linux/slab.h>
+#include <net/sock.h>
#include <net/inet_frag.h>
static void inet_frag_secret_rebuild(unsigned long dummy)
__releases(&f->lock)
{
struct inet_frag_queue *q;
+ int depth = 0;
hlist_for_each_entry(q, &f->hash[hash], list) {
if (q->net == nf && f->match(q, key)) {
read_unlock(&f->lock);
return q;
}
+ depth++;
}
read_unlock(&f->lock);
- return inet_frag_create(nf, f, key);
+ if (depth <= INETFRAGS_MAXDEPTH)
+ return inet_frag_create(nf, f, key);
+ else
+ return ERR_PTR(-ENOBUFS);
}
EXPORT_SYMBOL(inet_frag_find);
+
+void inet_frag_maybe_warn_overflow(struct inet_frag_queue *q,
+ const char *prefix)
+{
+ static const char msg[] = "inet_frag_find: Fragment hash bucket"
+ " list length grew over limit " __stringify(INETFRAGS_MAXDEPTH)
+ ". Dropping fragment.\n";
+
+ if (PTR_ERR(q) == -ENOBUFS)
+ LIMIT_NETDEBUG(KERN_WARNING "%s%s", prefix, msg);
+}
+EXPORT_SYMBOL(inet_frag_maybe_warn_overflow);
hash = ipqhashfn(iph->id, iph->saddr, iph->daddr, iph->protocol);
q = inet_frag_find(&net->ipv4.frags, &ip4_frags, &arg, hash);
- if (q == NULL)
- goto out_nomem;
-
+ if (IS_ERR_OR_NULL(q)) {
+ inet_frag_maybe_warn_overflow(q, pr_fmt());
+ return NULL;
+ }
return container_of(q, struct ipq, q);
-
-out_nomem:
- LIMIT_NETDEBUG(KERN_ERR pr_fmt("ip_frag_create: no memory left !\n"));
- return NULL;
}
/* Is the fragment too far ahead to be part of ipq? */
if (dev->header_ops && dev->type == ARPHRD_IPGRE) {
gre_hlen = 0;
- if (skb->protocol == htons(ETH_P_IP))
- tiph = (const struct iphdr *)skb->data;
- else
- tiph = &tunnel->parms.iph;
+ tiph = (const struct iphdr *)skb->data;
} else {
gre_hlen = tunnel->hlen;
tiph = &tunnel->parms.iph;
}
switch (optptr[3]&0xF) {
case IPOPT_TS_TSONLY:
- opt->ts = optptr - iph;
if (skb)
timeptr = &optptr[optptr[2]-1];
opt->ts_needtime = 1;
pp_ptr = optptr + 2;
goto error;
}
- opt->ts = optptr - iph;
if (rt) {
spec_dst_fill(&spec_dst, skb);
memcpy(&optptr[optptr[2]-1], &spec_dst, 4);
pp_ptr = optptr + 2;
goto error;
}
- opt->ts = optptr - iph;
{
__be32 addr;
memcpy(&addr, &optptr[optptr[2]-1], 4);
put_unaligned_be32(midtime, timeptr);
opt->is_changed = 1;
}
- } else {
+ } else if ((optptr[3]&0xF) != IPOPT_TS_PRESPEC) {
unsigned int overflow = optptr[3]>>4;
if (overflow == 15) {
pp_ptr = optptr + 3;
goto error;
}
- opt->ts = optptr - iph;
if (skb) {
optptr[3] = (optptr[3]&0xF)|((overflow+1)<<4);
opt->is_changed = 1;
}
}
+ opt->ts = optptr - iph;
break;
case IPOPT_RA:
if (optlen < 4) {
}
for (i++; i < CONF_NAMESERVERS_MAX; i++)
if (ic_nameservers[i] != NONE)
- pr_cont(", nameserver%u=%pI4\n", i, &ic_nameservers[i]);
+ pr_cont(", nameserver%u=%pI4", i, &ic_nameservers[i]);
+ pr_cont("\n");
#endif /* !SILENT */
return 0;
If unsure, say Y.
-config IP_NF_QUEUE
- tristate "IP Userspace queueing via NETLINK (OBSOLETE)"
- depends on NETFILTER_ADVANCED
- help
- Netfilter has the ability to queue packets to user space: the
- netlink device can be used to access them using this driver.
-
- This option enables the old IPv4-only "ip_queue" implementation
- which has been obsoleted by the new "nfnetlink_queue" code (see
- CONFIG_NETFILTER_NETLINK_QUEUE).
-
- To compile it as a module, choose M here. If unsure, say N.
-
config IP_NF_IPTABLES
tristate "IP tables support (required for filtering/masq/NAT)"
default m if NETFILTER_ADVANCED=n
* Make sure that we have exactly size bytes
* available to the caller, no more, no less.
*/
- skb->avail_size = size;
+ skb->reserved_tailroom = skb->end - skb->tail - size;
return skb;
}
__kfree_skb(skb);
if (tcp_is_reno(tp))
tcp_reset_reno_sack(tp);
- if (!how) {
- /* Push undo marker, if it was plain RTO and nothing
- * was retransmitted. */
- tp->undo_marker = tp->snd_una;
- } else {
+ tp->undo_marker = tp->snd_una;
+ if (how) {
tp->sacked_out = 0;
tp->fackets_out = 0;
}
struct inet_sock *inet = inet_sk(sk);
u32 mtu = tcp_sk(sk)->mtu_info;
- /* We are not interested in TCP_LISTEN and open_requests (SYN-ACKs
- * send out by Linux are always <576bytes so they should go through
- * unfragmented).
- */
- if (sk->sk_state == TCP_LISTEN)
- return;
-
dst = inet_csk_update_pmtu(sk, mtu);
if (!dst)
return;
goto out;
if (code == ICMP_FRAG_NEEDED) { /* PMTU discovery (RFC1191) */
+ /* We are not interested in TCP_LISTEN and open_requests
+ * (SYN-ACKs send out by Linux are always <576bytes so
+ * they should go through unfragmented).
+ */
+ if (sk->sk_state == TCP_LISTEN)
+ goto out;
+
tp->mtu_info = info;
if (!sock_owned_by_user(sk)) {
tcp_v4_mtu_reduced(sk);
eat = min_t(int, len, skb_headlen(skb));
if (eat) {
__skb_pull(skb, eat);
- skb->avail_size -= eat;
len -= eat;
if (!len)
return;
goto send_now;
}
- /* Ok, it looks like it is advisable to defer. */
- tp->tso_deferred = 1 | (jiffies << 1);
+ /* Ok, it looks like it is advisable to defer.
+ * Do not rearm the timer if already set to not break TCP ACK clocking.
+ */
+ if (!tp->tso_deferred)
+ tp->tso_deferred = 1 | (jiffies << 1);
return true;
void udp_destroy_sock(struct sock *sk)
{
+ struct udp_sock *up = udp_sk(sk);
bool slow = lock_sock_fast(sk);
udp_flush_pending_frames(sk);
unlock_sock_fast(sk, slow);
+ if (static_key_false(&udp_encap_needed) && up->encap_type) {
+ void (*encap_destroy)(struct sock *sk);
+ encap_destroy = ACCESS_ONCE(up->encap_destroy);
+ if (encap_destroy)
+ encap_destroy(sk);
+ }
}
/*
static void init_loopback(struct net_device *dev)
{
struct inet6_dev *idev;
+ struct net_device *sp_dev;
+ struct inet6_ifaddr *sp_ifa;
+ struct rt6_info *sp_rt;
/* ::1 */
}
add_addr(idev, &in6addr_loopback, 128, IFA_HOST);
+
+ /* Add routes to other interface's IPv6 addresses */
+ for_each_netdev(dev_net(dev), sp_dev) {
+ if (!strcmp(sp_dev->name, dev->name))
+ continue;
+
+ idev = __in6_dev_get(sp_dev);
+ if (!idev)
+ continue;
+
+ read_lock_bh(&idev->lock);
+ list_for_each_entry(sp_ifa, &idev->addr_list, if_list) {
+
+ if (sp_ifa->flags & (IFA_F_DADFAILED | IFA_F_TENTATIVE))
+ continue;
+
+ sp_rt = addrconf_dst_alloc(idev, &sp_ifa->addr, 0);
+
+ /* Failure cases are ignored */
+ if (!IS_ERR(sp_rt))
+ ip6_ins_rt(sp_rt);
+ }
+ read_unlock_bh(&idev->lock);
+ }
}
static void addrconf_add_linklocal(struct inet6_dev *idev, const struct in6_addr *addr)
static int __net_init addrconf_init_net(struct net *net)
{
- int err;
+ int err = -ENOMEM;
struct ipv6_devconf *all, *dflt;
- err = -ENOMEM;
- all = &ipv6_devconf;
- dflt = &ipv6_devconf_dflt;
+ all = kmemdup(&ipv6_devconf, sizeof(ipv6_devconf), GFP_KERNEL);
+ if (all == NULL)
+ goto err_alloc_all;
- if (!net_eq(net, &init_net)) {
- all = kmemdup(all, sizeof(ipv6_devconf), GFP_KERNEL);
- if (all == NULL)
- goto err_alloc_all;
+ dflt = kmemdup(&ipv6_devconf_dflt, sizeof(ipv6_devconf_dflt), GFP_KERNEL);
+ if (dflt == NULL)
+ goto err_alloc_dflt;
- dflt = kmemdup(dflt, sizeof(ipv6_devconf_dflt), GFP_KERNEL);
- if (dflt == NULL)
- goto err_alloc_dflt;
- } else {
- /* these will be inherited by all namespaces */
- dflt->autoconf = ipv6_defaults.autoconf;
- dflt->disable_ipv6 = ipv6_defaults.disable_ipv6;
- }
+ /* these will be inherited by all namespaces */
+ dflt->autoconf = ipv6_defaults.autoconf;
+ dflt->disable_ipv6 = ipv6_defaults.disable_ipv6;
net->ipv6.devconf_all = all;
net->ipv6.devconf_dflt = dflt;
ipv6_addr_loopback(&hdr->daddr))
goto err;
+ /* RFC4291 Errata ID: 3480
+ * Interface-Local scope spans only a single interface on a
+ * node and is useful only for loopback transmission of
+ * multicast. Packets with interface-local scope received
+ * from another node must be discarded.
+ */
+ if (!(skb->pkt_type == PACKET_LOOPBACK ||
+ dev->flags & IFF_LOOPBACK) &&
+ ipv6_addr_is_multicast(&hdr->daddr) &&
+ IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 1)
+ goto err;
+
/* RFC4291 2.7
* Nodes must not originate a packet to a multicast address whose scope
* field contains the reserved value 0; if such a packet is received, it
* IPv6 multicast router mode is now supported ;)
*/
if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
- !(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) &&
+ !(ipv6_addr_type(&hdr->daddr) &
+ (IPV6_ADDR_LOOPBACK|IPV6_ADDR_LINKLOCAL)) &&
likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
/*
* Okay, we try to forward - split and duplicate
if (pfx_len - i >= 32)
mask = 0;
else
- mask = htonl(~((1 << (pfx_len - i)) - 1));
+ mask = htonl((1 << (i - pfx_len + 32)) - 1);
idx = i / 32;
addr->s6_addr32[idx] &= mask;
static struct xt_target ip6t_npt_target_reg[] __read_mostly = {
{
.name = "SNPT",
+ .table = "mangle",
.target = ip6t_snpt_tg,
.targetsize = sizeof(struct ip6t_npt_tginfo),
.checkentry = ip6t_npt_checkentry,
},
{
.name = "DNPT",
+ .table = "mangle",
.target = ip6t_dnpt_tg,
.targetsize = sizeof(struct ip6t_npt_tginfo),
.checkentry = ip6t_npt_checkentry,
* 2 of the License, or (at your option) any later version.
*/
+#define pr_fmt(fmt) "IPv6-nf: " fmt
+
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/string.h>
q = inet_frag_find(&net->nf_frag.frags, &nf_frags, &arg, hash);
local_bh_enable();
- if (q == NULL)
- goto oom;
-
+ if (IS_ERR_OR_NULL(q)) {
+ inet_frag_maybe_warn_overflow(q, pr_fmt());
+ return NULL;
+ }
return container_of(q, struct frag_queue, q);
-
-oom:
- return NULL;
}
* YOSHIFUJI,H. @USAGI Always remove fragment header to
* calculate ICV correctly.
*/
+
+#define pr_fmt(fmt) "IPv6: " fmt
+
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/string.h>
hash = inet6_hash_frag(id, src, dst, ip6_frags.rnd);
q = inet_frag_find(&net->ipv6.frags, &ip6_frags, &arg, hash);
- if (q == NULL)
+ if (IS_ERR_OR_NULL(q)) {
+ inet_frag_maybe_warn_overflow(q, pr_fmt());
return NULL;
-
+ }
return container_of(q, struct frag_queue, q);
}
}
if (type == ICMPV6_PKT_TOOBIG) {
+ /* We are not interested in TCP_LISTEN and open_requests
+ * (SYN-ACKs send out by Linux are always <576bytes so
+ * they should go through unfragmented).
+ */
+ if (sk->sk_state == TCP_LISTEN)
+ goto out;
+
tp->mtu_info = ntohl(info);
if (!sock_owned_by_user(sk))
tcp_v6_mtu_reduced(sk);
void udpv6_destroy_sock(struct sock *sk)
{
+ struct udp_sock *up = udp_sk(sk);
lock_sock(sk);
udp_v6_flush_pending_frames(sk);
release_sock(sk);
+ if (static_key_false(&udpv6_encap_needed) && up->encap_type) {
+ void (*encap_destroy)(struct sock *sk);
+ encap_destroy = ACCESS_ONCE(up->encap_destroy);
+ if (encap_destroy)
+ encap_destroy(sk);
+ }
+
inet6_destroy_sock(sk);
}
NULL, NULL, NULL);
/* Check if the we got some results */
- if (!self->cachedaddr)
- return -EAGAIN; /* Didn't find any devices */
+ if (!self->cachedaddr) {
+ err = -EAGAIN; /* Didn't find any devices */
+ goto out;
+ }
daddr = self->cachedaddr;
/* Cleanup */
self->cachedaddr = 0;
struct tty_port *port = &self->port;
DECLARE_WAITQUEUE(wait, current);
int retval;
- int do_clocal = 0, extra_count = 0;
+ int do_clocal = 0;
unsigned long flags;
IRDA_DEBUG(2, "%s()\n", __func__ );
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
*/
- if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
- /* nonblock mode is set or port is not enabled */
+ if (test_bit(TTY_IO_ERROR, &tty->flags)) {
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (filp->f_flags & O_NONBLOCK) {
+ /* nonblock mode is set */
+ if (tty->termios.c_cflag & CBAUD)
+ tty_port_raise_dtr_rts(port);
port->flags |= ASYNC_NORMAL_ACTIVE;
IRDA_DEBUG(1, "%s(), O_NONBLOCK requested!\n", __func__ );
return 0;
__FILE__, __LINE__, tty->driver->name, port->count);
spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp)) {
- extra_count = 1;
+ if (!tty_hung_up_p(filp))
port->count--;
- }
- spin_unlock_irqrestore(&port->lock, flags);
port->blocked_open++;
+ spin_unlock_irqrestore(&port->lock, flags);
while (1) {
if (tty->termios.c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
- current->state = TASK_INTERRUPTIBLE;
+ set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
!test_bit(ASYNCB_INITIALIZED, &port->flags)) {
__set_current_state(TASK_RUNNING);
remove_wait_queue(&port->open_wait, &wait);
- if (extra_count) {
- /* ++ is not atomic, so this should be protected - Jean II */
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ if (!tty_hung_up_p(filp))
port->count++;
- spin_unlock_irqrestore(&port->lock, flags);
- }
port->blocked_open--;
+ spin_unlock_irqrestore(&port->lock, flags);
IRDA_DEBUG(1, "%s(%d):block_til_ready after blocking on %s open_count=%d\n",
__FILE__, __LINE__, tty->driver->name, port->count);
XFRM_POLICY_BLOCK : XFRM_POLICY_ALLOW);
xp->priority = pol->sadb_x_policy_priority;
- sa = ext_hdrs[SADB_EXT_ADDRESS_SRC-1],
+ sa = ext_hdrs[SADB_EXT_ADDRESS_SRC-1];
xp->family = pfkey_sadb_addr2xfrm_addr(sa, &xp->selector.saddr);
if (!xp->family) {
err = -EINVAL;
if (xp->selector.sport)
xp->selector.sport_mask = htons(0xffff);
- sa = ext_hdrs[SADB_EXT_ADDRESS_DST-1],
+ sa = ext_hdrs[SADB_EXT_ADDRESS_DST-1];
pfkey_sadb_addr2xfrm_addr(sa, &xp->selector.daddr);
xp->selector.prefixlen_d = sa->sadb_address_prefixlen;
memset(&sel, 0, sizeof(sel));
- sa = ext_hdrs[SADB_EXT_ADDRESS_SRC-1],
+ sa = ext_hdrs[SADB_EXT_ADDRESS_SRC-1];
sel.family = pfkey_sadb_addr2xfrm_addr(sa, &sel.saddr);
sel.prefixlen_s = sa->sadb_address_prefixlen;
sel.proto = pfkey_proto_to_xfrm(sa->sadb_address_proto);
if (sel.sport)
sel.sport_mask = htons(0xffff);
- sa = ext_hdrs[SADB_EXT_ADDRESS_DST-1],
+ sa = ext_hdrs[SADB_EXT_ADDRESS_DST-1];
pfkey_sadb_addr2xfrm_addr(sa, &sel.daddr);
sel.prefixlen_d = sa->sadb_address_prefixlen;
sel.proto = pfkey_proto_to_xfrm(sa->sadb_address_proto);
hdr->sadb_msg_pid = c->portid;
hdr->sadb_msg_version = PF_KEY_V2;
hdr->sadb_msg_errno = (uint8_t) 0;
+ hdr->sadb_msg_satype = SADB_SATYPE_UNSPEC;
hdr->sadb_msg_len = (sizeof(struct sadb_msg) / sizeof(uint64_t));
pfkey_broadcast(skb_out, GFP_ATOMIC, BROADCAST_ALL, NULL, c->net);
return 0;
static void l2tp_session_set_header_len(struct l2tp_session *session, int version);
static void l2tp_tunnel_free(struct l2tp_tunnel *tunnel);
-static void l2tp_tunnel_closeall(struct l2tp_tunnel *tunnel);
static inline struct l2tp_net *l2tp_pernet(struct net *net)
{
} else {
/* Socket is owned by kernelspace */
sk = tunnel->sock;
+ sock_hold(sk);
}
out:
}
sock_put(sk);
}
+ sock_put(sk);
}
EXPORT_SYMBOL_GPL(l2tp_tunnel_sock_put);
struct sk_buff *skbp;
struct sk_buff *tmp;
u32 ns = L2TP_SKB_CB(skb)->ns;
- struct l2tp_stats *sstats;
spin_lock_bh(&session->reorder_q.lock);
- sstats = &session->stats;
skb_queue_walk_safe(&session->reorder_q, skbp, tmp) {
if (L2TP_SKB_CB(skbp)->ns > ns) {
__skb_queue_before(&session->reorder_q, skbp, skb);
"%s: pkt %hu, inserted before %hu, reorder_q len=%d\n",
session->name, ns, L2TP_SKB_CB(skbp)->ns,
skb_queue_len(&session->reorder_q));
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_oos_packets++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_oos_packets);
goto out;
}
}
{
struct l2tp_tunnel *tunnel = session->tunnel;
int length = L2TP_SKB_CB(skb)->length;
- struct l2tp_stats *tstats, *sstats;
/* We're about to requeue the skb, so return resources
* to its current owner (a socket receive buffer).
*/
skb_orphan(skb);
- tstats = &tunnel->stats;
- u64_stats_update_begin(&tstats->syncp);
- sstats = &session->stats;
- u64_stats_update_begin(&sstats->syncp);
- tstats->rx_packets++;
- tstats->rx_bytes += length;
- sstats->rx_packets++;
- sstats->rx_bytes += length;
- u64_stats_update_end(&tstats->syncp);
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&tunnel->stats.rx_packets);
+ atomic_long_add(length, &tunnel->stats.rx_bytes);
+ atomic_long_inc(&session->stats.rx_packets);
+ atomic_long_add(length, &session->stats.rx_bytes);
if (L2TP_SKB_CB(skb)->has_seq) {
/* Bump our Nr */
{
struct sk_buff *skb;
struct sk_buff *tmp;
- struct l2tp_stats *sstats;
/* If the pkt at the head of the queue has the nr that we
* expect to send up next, dequeue it and any other
*/
start:
spin_lock_bh(&session->reorder_q.lock);
- sstats = &session->stats;
skb_queue_walk_safe(&session->reorder_q, skb, tmp) {
if (time_after(jiffies, L2TP_SKB_CB(skb)->expires)) {
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_seq_discards++;
- sstats->rx_errors++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_seq_discards);
+ atomic_long_inc(&session->stats.rx_errors);
l2tp_dbg(session, L2TP_MSG_SEQ,
"%s: oos pkt %u len %d discarded (too old), waiting for %u, reorder_q_len=%d\n",
session->name, L2TP_SKB_CB(skb)->ns,
struct l2tp_tunnel *tunnel = session->tunnel;
int offset;
u32 ns, nr;
- struct l2tp_stats *sstats = &session->stats;
/* The ref count is increased since we now hold a pointer to
* the session. Take care to decrement the refcnt when exiting
"%s: cookie mismatch (%u/%u). Discarding.\n",
tunnel->name, tunnel->tunnel_id,
session->session_id);
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_cookie_discards++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_cookie_discards);
goto discard;
}
ptr += session->peer_cookie_len;
l2tp_warn(session, L2TP_MSG_SEQ,
"%s: recv data has no seq numbers when required. Discarding.\n",
session->name);
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_seq_discards++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_seq_discards);
goto discard;
}
l2tp_warn(session, L2TP_MSG_SEQ,
"%s: recv data has no seq numbers when required. Discarding.\n",
session->name);
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_seq_discards++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_seq_discards);
goto discard;
}
}
* packets
*/
if (L2TP_SKB_CB(skb)->ns != session->nr) {
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_seq_discards++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_seq_discards);
l2tp_dbg(session, L2TP_MSG_SEQ,
"%s: oos pkt %u len %d discarded, waiting for %u, reorder_q_len=%d\n",
session->name, L2TP_SKB_CB(skb)->ns,
return;
discard:
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_errors++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_errors);
kfree_skb(skb);
if (session->deref)
}
EXPORT_SYMBOL(l2tp_recv_common);
+/* Drop skbs from the session's reorder_q
+ */
+int l2tp_session_queue_purge(struct l2tp_session *session)
+{
+ struct sk_buff *skb = NULL;
+ BUG_ON(!session);
+ BUG_ON(session->magic != L2TP_SESSION_MAGIC);
+ while ((skb = skb_dequeue(&session->reorder_q))) {
+ atomic_long_inc(&session->stats.rx_errors);
+ kfree_skb(skb);
+ if (session->deref)
+ (*session->deref)(session);
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(l2tp_session_queue_purge);
+
/* Internal UDP receive frame. Do the real work of receiving an L2TP data frame
* here. The skb is not on a list when we get here.
* Returns 0 if the packet was a data packet and was successfully passed on.
u32 tunnel_id, session_id;
u16 version;
int length;
- struct l2tp_stats *tstats;
if (tunnel->sock && l2tp_verify_udp_checksum(tunnel->sock, skb))
goto discard_bad_csum;
discard_bad_csum:
LIMIT_NETDEBUG("%s: UDP: bad checksum\n", tunnel->name);
UDP_INC_STATS_USER(tunnel->l2tp_net, UDP_MIB_INERRORS, 0);
- tstats = &tunnel->stats;
- u64_stats_update_begin(&tstats->syncp);
- tstats->rx_errors++;
- u64_stats_update_end(&tstats->syncp);
+ atomic_long_inc(&tunnel->stats.rx_errors);
kfree_skb(skb);
return 0;
struct l2tp_tunnel *tunnel = session->tunnel;
unsigned int len = skb->len;
int error;
- struct l2tp_stats *tstats, *sstats;
/* Debug */
if (session->send_seq)
error = ip_queue_xmit(skb, fl);
/* Update stats */
- tstats = &tunnel->stats;
- u64_stats_update_begin(&tstats->syncp);
- sstats = &session->stats;
- u64_stats_update_begin(&sstats->syncp);
if (error >= 0) {
- tstats->tx_packets++;
- tstats->tx_bytes += len;
- sstats->tx_packets++;
- sstats->tx_bytes += len;
+ atomic_long_inc(&tunnel->stats.tx_packets);
+ atomic_long_add(len, &tunnel->stats.tx_bytes);
+ atomic_long_inc(&session->stats.tx_packets);
+ atomic_long_add(len, &session->stats.tx_bytes);
} else {
- tstats->tx_errors++;
- sstats->tx_errors++;
+ atomic_long_inc(&tunnel->stats.tx_errors);
+ atomic_long_inc(&session->stats.tx_errors);
}
- u64_stats_update_end(&tstats->syncp);
- u64_stats_update_end(&sstats->syncp);
return 0;
}
/* No longer an encapsulation socket. See net/ipv4/udp.c */
(udp_sk(sk))->encap_type = 0;
(udp_sk(sk))->encap_rcv = NULL;
+ (udp_sk(sk))->encap_destroy = NULL;
break;
case L2TP_ENCAPTYPE_IP:
break;
/* When the tunnel is closed, all the attached sessions need to go too.
*/
-static void l2tp_tunnel_closeall(struct l2tp_tunnel *tunnel)
+void l2tp_tunnel_closeall(struct l2tp_tunnel *tunnel)
{
int hash;
struct hlist_node *walk;
hlist_del_init(&session->hlist);
- /* Since we should hold the sock lock while
- * doing any unbinding, we need to release the
- * lock we're holding before taking that lock.
- * Hold a reference to the sock so it doesn't
- * disappear as we're jumping between locks.
- */
if (session->ref != NULL)
(*session->ref)(session);
write_unlock_bh(&tunnel->hlist_lock);
- if (tunnel->version != L2TP_HDR_VER_2) {
- struct l2tp_net *pn = l2tp_pernet(tunnel->l2tp_net);
-
- spin_lock_bh(&pn->l2tp_session_hlist_lock);
- hlist_del_init_rcu(&session->global_hlist);
- spin_unlock_bh(&pn->l2tp_session_hlist_lock);
- synchronize_rcu();
- }
+ __l2tp_session_unhash(session);
+ l2tp_session_queue_purge(session);
if (session->session_close != NULL)
(*session->session_close)(session);
if (session->deref != NULL)
(*session->deref)(session);
+ l2tp_session_dec_refcount(session);
+
write_lock_bh(&tunnel->hlist_lock);
/* Now restart from the beginning of this hash
}
write_unlock_bh(&tunnel->hlist_lock);
}
+EXPORT_SYMBOL_GPL(l2tp_tunnel_closeall);
+
+/* Tunnel socket destroy hook for UDP encapsulation */
+static void l2tp_udp_encap_destroy(struct sock *sk)
+{
+ struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
+ if (tunnel) {
+ l2tp_tunnel_closeall(tunnel);
+ sock_put(sk);
+ }
+}
/* Really kill the tunnel.
* Come here only when all sessions have been cleared from the tunnel.
return;
sock = sk->sk_socket;
- BUG_ON(!sock);
- /* If the tunnel socket was created directly by the kernel, use the
- * sk_* API to release the socket now. Otherwise go through the
- * inet_* layer to shut the socket down, and let userspace close it.
+ /* If the tunnel socket was created by userspace, then go through the
+ * inet layer to shut the socket down, and let userspace close it.
+ * Otherwise, if we created the socket directly within the kernel, use
+ * the sk API to release it here.
* In either case the tunnel resources are freed in the socket
* destructor when the tunnel socket goes away.
*/
- if (sock->file == NULL) {
- kernel_sock_shutdown(sock, SHUT_RDWR);
- sk_release_kernel(sk);
+ if (tunnel->fd >= 0) {
+ if (sock)
+ inet_shutdown(sock, 2);
} else {
- inet_shutdown(sock, 2);
+ if (sock)
+ kernel_sock_shutdown(sock, SHUT_RDWR);
+ sk_release_kernel(sk);
}
l2tp_tunnel_sock_put(sk);
/* Mark socket as an encapsulation socket. See net/ipv4/udp.c */
udp_sk(sk)->encap_type = UDP_ENCAP_L2TPINUDP;
udp_sk(sk)->encap_rcv = l2tp_udp_encap_recv;
+ udp_sk(sk)->encap_destroy = l2tp_udp_encap_destroy;
#if IS_ENABLED(CONFIG_IPV6)
if (sk->sk_family == PF_INET6)
udpv6_encap_enable();
*/
int l2tp_tunnel_delete(struct l2tp_tunnel *tunnel)
{
+ l2tp_tunnel_closeall(tunnel);
return (false == queue_work(l2tp_wq, &tunnel->del_work));
}
EXPORT_SYMBOL_GPL(l2tp_tunnel_delete);
*/
void l2tp_session_free(struct l2tp_session *session)
{
- struct l2tp_tunnel *tunnel;
+ struct l2tp_tunnel *tunnel = session->tunnel;
BUG_ON(atomic_read(&session->ref_count) != 0);
- tunnel = session->tunnel;
- if (tunnel != NULL) {
+ if (tunnel) {
BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
+ if (session->session_id != 0)
+ atomic_dec(&l2tp_session_count);
+ sock_put(tunnel->sock);
+ session->tunnel = NULL;
+ l2tp_tunnel_dec_refcount(tunnel);
+ }
+
+ kfree(session);
- /* Delete the session from the hash */
+ return;
+}
+EXPORT_SYMBOL_GPL(l2tp_session_free);
+
+/* Remove an l2tp session from l2tp_core's hash lists.
+ * Provides a tidyup interface for pseudowire code which can't just route all
+ * shutdown via. l2tp_session_delete and a pseudowire-specific session_close
+ * callback.
+ */
+void __l2tp_session_unhash(struct l2tp_session *session)
+{
+ struct l2tp_tunnel *tunnel = session->tunnel;
+
+ /* Remove the session from core hashes */
+ if (tunnel) {
+ /* Remove from the per-tunnel hash */
write_lock_bh(&tunnel->hlist_lock);
hlist_del_init(&session->hlist);
write_unlock_bh(&tunnel->hlist_lock);
- /* Unlink from the global hash if not L2TPv2 */
+ /* For L2TPv3 we have a per-net hash: remove from there, too */
if (tunnel->version != L2TP_HDR_VER_2) {
struct l2tp_net *pn = l2tp_pernet(tunnel->l2tp_net);
-
spin_lock_bh(&pn->l2tp_session_hlist_lock);
hlist_del_init_rcu(&session->global_hlist);
spin_unlock_bh(&pn->l2tp_session_hlist_lock);
synchronize_rcu();
}
-
- if (session->session_id != 0)
- atomic_dec(&l2tp_session_count);
-
- sock_put(tunnel->sock);
-
- /* This will delete the tunnel context if this
- * is the last session on the tunnel.
- */
- session->tunnel = NULL;
- l2tp_tunnel_dec_refcount(tunnel);
}
-
- kfree(session);
-
- return;
}
-EXPORT_SYMBOL_GPL(l2tp_session_free);
+EXPORT_SYMBOL_GPL(__l2tp_session_unhash);
/* This function is used by the netlink SESSION_DELETE command and by
pseudowire modules.
*/
int l2tp_session_delete(struct l2tp_session *session)
{
+ if (session->ref)
+ (*session->ref)(session);
+ __l2tp_session_unhash(session);
+ l2tp_session_queue_purge(session);
if (session->session_close != NULL)
(*session->session_close)(session);
-
+ if (session->deref)
+ (*session->ref)(session);
l2tp_session_dec_refcount(session);
-
return 0;
}
EXPORT_SYMBOL_GPL(l2tp_session_delete);
-
/* We come here whenever a session's send_seq, cookie_len or
* l2specific_len parameters are set.
*/
struct sk_buff;
struct l2tp_stats {
- u64 tx_packets;
- u64 tx_bytes;
- u64 tx_errors;
- u64 rx_packets;
- u64 rx_bytes;
- u64 rx_seq_discards;
- u64 rx_oos_packets;
- u64 rx_errors;
- u64 rx_cookie_discards;
- struct u64_stats_sync syncp;
+ atomic_long_t tx_packets;
+ atomic_long_t tx_bytes;
+ atomic_long_t tx_errors;
+ atomic_long_t rx_packets;
+ atomic_long_t rx_bytes;
+ atomic_long_t rx_seq_discards;
+ atomic_long_t rx_oos_packets;
+ atomic_long_t rx_errors;
+ atomic_long_t rx_cookie_discards;
};
struct l2tp_tunnel;
extern struct l2tp_tunnel *l2tp_tunnel_find_nth(struct net *net, int nth);
extern int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 peer_tunnel_id, struct l2tp_tunnel_cfg *cfg, struct l2tp_tunnel **tunnelp);
+extern void l2tp_tunnel_closeall(struct l2tp_tunnel *tunnel);
extern int l2tp_tunnel_delete(struct l2tp_tunnel *tunnel);
extern struct l2tp_session *l2tp_session_create(int priv_size, struct l2tp_tunnel *tunnel, u32 session_id, u32 peer_session_id, struct l2tp_session_cfg *cfg);
+extern void __l2tp_session_unhash(struct l2tp_session *session);
extern int l2tp_session_delete(struct l2tp_session *session);
extern void l2tp_session_free(struct l2tp_session *session);
extern void l2tp_recv_common(struct l2tp_session *session, struct sk_buff *skb, unsigned char *ptr, unsigned char *optr, u16 hdrflags, int length, int (*payload_hook)(struct sk_buff *skb));
+extern int l2tp_session_queue_purge(struct l2tp_session *session);
extern int l2tp_udp_encap_recv(struct sock *sk, struct sk_buff *skb);
extern int l2tp_xmit_skb(struct l2tp_session *session, struct sk_buff *skb, int hdr_len);
tunnel->sock ? atomic_read(&tunnel->sock->sk_refcnt) : 0,
atomic_read(&tunnel->ref_count));
- seq_printf(m, " %08x rx %llu/%llu/%llu rx %llu/%llu/%llu\n",
+ seq_printf(m, " %08x rx %ld/%ld/%ld rx %ld/%ld/%ld\n",
tunnel->debug,
- (unsigned long long)tunnel->stats.tx_packets,
- (unsigned long long)tunnel->stats.tx_bytes,
- (unsigned long long)tunnel->stats.tx_errors,
- (unsigned long long)tunnel->stats.rx_packets,
- (unsigned long long)tunnel->stats.rx_bytes,
- (unsigned long long)tunnel->stats.rx_errors);
+ atomic_long_read(&tunnel->stats.tx_packets),
+ atomic_long_read(&tunnel->stats.tx_bytes),
+ atomic_long_read(&tunnel->stats.tx_errors),
+ atomic_long_read(&tunnel->stats.rx_packets),
+ atomic_long_read(&tunnel->stats.rx_bytes),
+ atomic_long_read(&tunnel->stats.rx_errors));
if (tunnel->show != NULL)
tunnel->show(m, tunnel);
seq_printf(m, "\n");
}
- seq_printf(m, " %hu/%hu tx %llu/%llu/%llu rx %llu/%llu/%llu\n",
+ seq_printf(m, " %hu/%hu tx %ld/%ld/%ld rx %ld/%ld/%ld\n",
session->nr, session->ns,
- (unsigned long long)session->stats.tx_packets,
- (unsigned long long)session->stats.tx_bytes,
- (unsigned long long)session->stats.tx_errors,
- (unsigned long long)session->stats.rx_packets,
- (unsigned long long)session->stats.rx_bytes,
- (unsigned long long)session->stats.rx_errors);
+ atomic_long_read(&session->stats.tx_packets),
+ atomic_long_read(&session->stats.tx_bytes),
+ atomic_long_read(&session->stats.tx_errors),
+ atomic_long_read(&session->stats.rx_packets),
+ atomic_long_read(&session->stats.rx_bytes),
+ atomic_long_read(&session->stats.rx_errors));
if (session->show != NULL)
session->show(m, session);
static void l2tp_ip_destroy_sock(struct sock *sk)
{
struct sk_buff *skb;
+ struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL)
kfree_skb(skb);
+ if (tunnel) {
+ l2tp_tunnel_closeall(tunnel);
+ sock_put(sk);
+ }
+
sk_refcnt_debug_dec(sk);
}
static void l2tp_ip6_destroy_sock(struct sock *sk)
{
+ struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
+
lock_sock(sk);
ip6_flush_pending_frames(sk);
release_sock(sk);
+ if (tunnel) {
+ l2tp_tunnel_closeall(tunnel);
+ sock_put(sk);
+ }
+
inet6_destroy_sock(sk);
}
#if IS_ENABLED(CONFIG_IPV6)
struct ipv6_pinfo *np = NULL;
#endif
- struct l2tp_stats stats;
- unsigned int start;
hdr = genlmsg_put(skb, portid, seq, &l2tp_nl_family, flags,
L2TP_CMD_TUNNEL_GET);
if (nest == NULL)
goto nla_put_failure;
- do {
- start = u64_stats_fetch_begin(&tunnel->stats.syncp);
- stats.tx_packets = tunnel->stats.tx_packets;
- stats.tx_bytes = tunnel->stats.tx_bytes;
- stats.tx_errors = tunnel->stats.tx_errors;
- stats.rx_packets = tunnel->stats.rx_packets;
- stats.rx_bytes = tunnel->stats.rx_bytes;
- stats.rx_errors = tunnel->stats.rx_errors;
- stats.rx_seq_discards = tunnel->stats.rx_seq_discards;
- stats.rx_oos_packets = tunnel->stats.rx_oos_packets;
- } while (u64_stats_fetch_retry(&tunnel->stats.syncp, start));
-
- if (nla_put_u64(skb, L2TP_ATTR_TX_PACKETS, stats.tx_packets) ||
- nla_put_u64(skb, L2TP_ATTR_TX_BYTES, stats.tx_bytes) ||
- nla_put_u64(skb, L2TP_ATTR_TX_ERRORS, stats.tx_errors) ||
- nla_put_u64(skb, L2TP_ATTR_RX_PACKETS, stats.rx_packets) ||
- nla_put_u64(skb, L2TP_ATTR_RX_BYTES, stats.rx_bytes) ||
+ if (nla_put_u64(skb, L2TP_ATTR_TX_PACKETS,
+ atomic_long_read(&tunnel->stats.tx_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_TX_BYTES,
+ atomic_long_read(&tunnel->stats.tx_bytes)) ||
+ nla_put_u64(skb, L2TP_ATTR_TX_ERRORS,
+ atomic_long_read(&tunnel->stats.tx_errors)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_PACKETS,
+ atomic_long_read(&tunnel->stats.rx_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_BYTES,
+ atomic_long_read(&tunnel->stats.rx_bytes)) ||
nla_put_u64(skb, L2TP_ATTR_RX_SEQ_DISCARDS,
- stats.rx_seq_discards) ||
+ atomic_long_read(&tunnel->stats.rx_seq_discards)) ||
nla_put_u64(skb, L2TP_ATTR_RX_OOS_PACKETS,
- stats.rx_oos_packets) ||
- nla_put_u64(skb, L2TP_ATTR_RX_ERRORS, stats.rx_errors))
+ atomic_long_read(&tunnel->stats.rx_oos_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_ERRORS,
+ atomic_long_read(&tunnel->stats.rx_errors)))
goto nla_put_failure;
nla_nest_end(skb, nest);
struct nlattr *nest;
struct l2tp_tunnel *tunnel = session->tunnel;
struct sock *sk = NULL;
- struct l2tp_stats stats;
- unsigned int start;
sk = tunnel->sock;
if (nest == NULL)
goto nla_put_failure;
- do {
- start = u64_stats_fetch_begin(&session->stats.syncp);
- stats.tx_packets = session->stats.tx_packets;
- stats.tx_bytes = session->stats.tx_bytes;
- stats.tx_errors = session->stats.tx_errors;
- stats.rx_packets = session->stats.rx_packets;
- stats.rx_bytes = session->stats.rx_bytes;
- stats.rx_errors = session->stats.rx_errors;
- stats.rx_seq_discards = session->stats.rx_seq_discards;
- stats.rx_oos_packets = session->stats.rx_oos_packets;
- } while (u64_stats_fetch_retry(&session->stats.syncp, start));
-
- if (nla_put_u64(skb, L2TP_ATTR_TX_PACKETS, stats.tx_packets) ||
- nla_put_u64(skb, L2TP_ATTR_TX_BYTES, stats.tx_bytes) ||
- nla_put_u64(skb, L2TP_ATTR_TX_ERRORS, stats.tx_errors) ||
- nla_put_u64(skb, L2TP_ATTR_RX_PACKETS, stats.rx_packets) ||
- nla_put_u64(skb, L2TP_ATTR_RX_BYTES, stats.rx_bytes) ||
+ if (nla_put_u64(skb, L2TP_ATTR_TX_PACKETS,
+ atomic_long_read(&session->stats.tx_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_TX_BYTES,
+ atomic_long_read(&session->stats.tx_bytes)) ||
+ nla_put_u64(skb, L2TP_ATTR_TX_ERRORS,
+ atomic_long_read(&session->stats.tx_errors)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_PACKETS,
+ atomic_long_read(&session->stats.rx_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_BYTES,
+ atomic_long_read(&session->stats.rx_bytes)) ||
nla_put_u64(skb, L2TP_ATTR_RX_SEQ_DISCARDS,
- stats.rx_seq_discards) ||
+ atomic_long_read(&session->stats.rx_seq_discards)) ||
nla_put_u64(skb, L2TP_ATTR_RX_OOS_PACKETS,
- stats.rx_oos_packets) ||
- nla_put_u64(skb, L2TP_ATTR_RX_ERRORS, stats.rx_errors))
+ atomic_long_read(&session->stats.rx_oos_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_ERRORS,
+ atomic_long_read(&session->stats.rx_errors)))
goto nla_put_failure;
nla_nest_end(skb, nest);
#include <net/ip.h>
#include <net/udp.h>
#include <net/xfrm.h>
+#include <net/inet_common.h>
#include <asm/byteorder.h>
#include <linux/atomic.h>
session->name);
/* Not bound. Nothing we can do, so discard. */
- session->stats.rx_errors++;
+ atomic_long_inc(&session->stats.rx_errors);
kfree_skb(skb);
}
{
struct pppol2tp_session *ps = l2tp_session_priv(session);
struct sock *sk = ps->sock;
- struct sk_buff *skb;
+ struct socket *sock = sk->sk_socket;
BUG_ON(session->magic != L2TP_SESSION_MAGIC);
- if (session->session_id == 0)
- goto out;
-
- if (sk != NULL) {
- lock_sock(sk);
-
- if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
- pppox_unbind_sock(sk);
- sk->sk_state = PPPOX_DEAD;
- sk->sk_state_change(sk);
- }
-
- /* Purge any queued data */
- skb_queue_purge(&sk->sk_receive_queue);
- skb_queue_purge(&sk->sk_write_queue);
- while ((skb = skb_dequeue(&session->reorder_q))) {
- kfree_skb(skb);
- sock_put(sk);
- }
- release_sock(sk);
+ if (sock) {
+ inet_shutdown(sock, 2);
+ /* Don't let the session go away before our socket does */
+ l2tp_session_inc_refcount(session);
}
-
-out:
return;
}
*/
static void pppol2tp_session_destruct(struct sock *sk)
{
- struct l2tp_session *session;
-
- if (sk->sk_user_data != NULL) {
- session = sk->sk_user_data;
- if (session == NULL)
- goto out;
-
+ struct l2tp_session *session = sk->sk_user_data;
+ if (session) {
sk->sk_user_data = NULL;
BUG_ON(session->magic != L2TP_SESSION_MAGIC);
l2tp_session_dec_refcount(session);
}
-
-out:
return;
}
session = pppol2tp_sock_to_session(sk);
/* Purge any queued data */
- skb_queue_purge(&sk->sk_receive_queue);
- skb_queue_purge(&sk->sk_write_queue);
if (session != NULL) {
- struct sk_buff *skb;
- while ((skb = skb_dequeue(&session->reorder_q))) {
- kfree_skb(skb);
- sock_put(sk);
- }
+ __l2tp_session_unhash(session);
+ l2tp_session_queue_purge(session);
sock_put(sk);
}
+ skb_queue_purge(&sk->sk_receive_queue);
+ skb_queue_purge(&sk->sk_write_queue);
release_sock(sk);
return error;
}
-/* Called when deleting sessions via the netlink interface.
- */
-static int pppol2tp_session_delete(struct l2tp_session *session)
-{
- struct pppol2tp_session *ps = l2tp_session_priv(session);
-
- if (ps->sock == NULL)
- l2tp_session_dec_refcount(session);
-
- return 0;
-}
-
#endif /* CONFIG_L2TP_V3 */
/* getname() support.
static void pppol2tp_copy_stats(struct pppol2tp_ioc_stats *dest,
struct l2tp_stats *stats)
{
- dest->tx_packets = stats->tx_packets;
- dest->tx_bytes = stats->tx_bytes;
- dest->tx_errors = stats->tx_errors;
- dest->rx_packets = stats->rx_packets;
- dest->rx_bytes = stats->rx_bytes;
- dest->rx_seq_discards = stats->rx_seq_discards;
- dest->rx_oos_packets = stats->rx_oos_packets;
- dest->rx_errors = stats->rx_errors;
+ dest->tx_packets = atomic_long_read(&stats->tx_packets);
+ dest->tx_bytes = atomic_long_read(&stats->tx_bytes);
+ dest->tx_errors = atomic_long_read(&stats->tx_errors);
+ dest->rx_packets = atomic_long_read(&stats->rx_packets);
+ dest->rx_bytes = atomic_long_read(&stats->rx_bytes);
+ dest->rx_seq_discards = atomic_long_read(&stats->rx_seq_discards);
+ dest->rx_oos_packets = atomic_long_read(&stats->rx_oos_packets);
+ dest->rx_errors = atomic_long_read(&stats->rx_errors);
}
/* Session ioctl helper.
tunnel->name,
(tunnel == tunnel->sock->sk_user_data) ? 'Y' : 'N',
atomic_read(&tunnel->ref_count) - 1);
- seq_printf(m, " %08x %llu/%llu/%llu %llu/%llu/%llu\n",
+ seq_printf(m, " %08x %ld/%ld/%ld %ld/%ld/%ld\n",
tunnel->debug,
- (unsigned long long)tunnel->stats.tx_packets,
- (unsigned long long)tunnel->stats.tx_bytes,
- (unsigned long long)tunnel->stats.tx_errors,
- (unsigned long long)tunnel->stats.rx_packets,
- (unsigned long long)tunnel->stats.rx_bytes,
- (unsigned long long)tunnel->stats.rx_errors);
+ atomic_long_read(&tunnel->stats.tx_packets),
+ atomic_long_read(&tunnel->stats.tx_bytes),
+ atomic_long_read(&tunnel->stats.tx_errors),
+ atomic_long_read(&tunnel->stats.rx_packets),
+ atomic_long_read(&tunnel->stats.rx_bytes),
+ atomic_long_read(&tunnel->stats.rx_errors));
}
static void pppol2tp_seq_session_show(struct seq_file *m, void *v)
session->lns_mode ? "LNS" : "LAC",
session->debug,
jiffies_to_msecs(session->reorder_timeout));
- seq_printf(m, " %hu/%hu %llu/%llu/%llu %llu/%llu/%llu\n",
+ seq_printf(m, " %hu/%hu %ld/%ld/%ld %ld/%ld/%ld\n",
session->nr, session->ns,
- (unsigned long long)session->stats.tx_packets,
- (unsigned long long)session->stats.tx_bytes,
- (unsigned long long)session->stats.tx_errors,
- (unsigned long long)session->stats.rx_packets,
- (unsigned long long)session->stats.rx_bytes,
- (unsigned long long)session->stats.rx_errors);
+ atomic_long_read(&session->stats.tx_packets),
+ atomic_long_read(&session->stats.tx_bytes),
+ atomic_long_read(&session->stats.tx_errors),
+ atomic_long_read(&session->stats.rx_packets),
+ atomic_long_read(&session->stats.rx_bytes),
+ atomic_long_read(&session->stats.rx_errors));
if (po)
seq_printf(m, " interface %s\n", ppp_dev_name(&po->chan));
static const struct l2tp_nl_cmd_ops pppol2tp_nl_cmd_ops = {
.session_create = pppol2tp_session_create,
- .session_delete = pppol2tp_session_delete,
+ .session_delete = l2tp_session_delete,
};
#endif /* CONFIG_L2TP_V3 */
list_del(&dep->list);
mutex_unlock(&local->mtx);
- ieee80211_roc_notify_destroy(dep);
+ ieee80211_roc_notify_destroy(dep, true);
return 0;
}
ieee80211_start_next_roc(local);
mutex_unlock(&local->mtx);
- ieee80211_roc_notify_destroy(found);
+ ieee80211_roc_notify_destroy(found, true);
} else {
/* work may be pending so use it all the time */
found->abort = true;
/* work will clean up etc */
flush_delayed_work(&found->work);
+ WARN_ON(!found->to_be_freed);
+ kfree(found);
}
return 0;
int ret = -ENODATA;
rcu_read_lock();
- if (local->use_chanctx) {
- chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
- if (chanctx_conf) {
- *chandef = chanctx_conf->def;
- ret = 0;
- }
- } else if (local->open_count == local->monitors) {
- *chandef = local->monitor_chandef;
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (chanctx_conf) {
+ *chandef = chanctx_conf->def;
+ ret = 0;
+ } else if (local->open_count > 0 &&
+ local->open_count == local->monitors &&
+ sdata->vif.type == NL80211_IFTYPE_MONITOR) {
+ if (local->use_chanctx)
+ *chandef = local->monitor_chandef;
+ else
+ cfg80211_chandef_create(chandef,
+ local->_oper_channel,
+ local->_oper_channel_type);
ret = 0;
}
rcu_read_unlock();
enum ieee80211_chanctx_mode mode)
{
struct ieee80211_chanctx *ctx;
+ u32 changed;
int err;
lockdep_assert_held(&local->chanctx_mtx);
ctx->conf.rx_chains_dynamic = 1;
ctx->mode = mode;
+ /* acquire mutex to prevent idle from changing */
+ mutex_lock(&local->mtx);
+ /* turn idle off *before* setting channel -- some drivers need that */
+ changed = ieee80211_idle_off(local);
+ if (changed)
+ ieee80211_hw_config(local, changed);
+
if (!local->use_chanctx) {
local->_oper_channel_type =
cfg80211_get_chandef_type(chandef);
err = drv_add_chanctx(local, ctx);
if (err) {
kfree(ctx);
- return ERR_PTR(err);
+ ctx = ERR_PTR(err);
+
+ ieee80211_recalc_idle(local);
+ goto out;
}
}
+ /* and keep the mutex held until the new chanctx is on the list */
list_add_rcu(&ctx->list, &local->chanctx_list);
- mutex_lock(&local->mtx);
- ieee80211_recalc_idle(local);
+ out:
mutex_unlock(&local->mtx);
return ctx;
struct ieee80211_channel *chan;
bool started, abort, hw_begun, notified;
+ bool to_be_freed;
unsigned long hw_start_time;
void ieee80211_roc_setup(struct ieee80211_local *local);
void ieee80211_start_next_roc(struct ieee80211_local *local);
void ieee80211_roc_purge(struct ieee80211_sub_if_data *sdata);
-void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc);
+void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc, bool free);
void ieee80211_sw_roc_work(struct work_struct *work);
void ieee80211_handle_roc_started(struct ieee80211_roc_work *roc);
enum nl80211_iftype type);
void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata);
void ieee80211_remove_interfaces(struct ieee80211_local *local);
+u32 ieee80211_idle_off(struct ieee80211_local *local);
void ieee80211_recalc_idle(struct ieee80211_local *local);
void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata,
const int offset);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_TXPOWER);
}
-static u32 ieee80211_idle_off(struct ieee80211_local *local)
+u32 ieee80211_idle_off(struct ieee80211_local *local)
{
if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
return 0;
static int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
- int ret = 0;
+ int ret;
if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
return 0;
- mutex_lock(&local->iflist_mtx);
+ ASSERT_RTNL();
if (local->monitor_sdata)
- goto out_unlock;
+ return 0;
sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, GFP_KERNEL);
- if (!sdata) {
- ret = -ENOMEM;
- goto out_unlock;
- }
+ if (!sdata)
+ return -ENOMEM;
/* set up data */
sdata->local = local;
if (WARN_ON(ret)) {
/* ok .. stupid driver, it asked for this! */
kfree(sdata);
- goto out_unlock;
+ return ret;
}
ret = ieee80211_check_queues(sdata);
if (ret) {
kfree(sdata);
- goto out_unlock;
+ return ret;
}
ret = ieee80211_vif_use_channel(sdata, &local->monitor_chandef,
if (ret) {
drv_remove_interface(local, sdata);
kfree(sdata);
- goto out_unlock;
+ return ret;
}
+ mutex_lock(&local->iflist_mtx);
rcu_assign_pointer(local->monitor_sdata, sdata);
- out_unlock:
mutex_unlock(&local->iflist_mtx);
- return ret;
+
+ return 0;
}
static void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
return;
+ ASSERT_RTNL();
+
mutex_lock(&local->iflist_mtx);
sdata = rcu_dereference_protected(local->monitor_sdata,
lockdep_is_held(&local->iflist_mtx));
- if (!sdata)
- goto out_unlock;
+ if (!sdata) {
+ mutex_unlock(&local->iflist_mtx);
+ return;
+ }
rcu_assign_pointer(local->monitor_sdata, NULL);
+ mutex_unlock(&local->iflist_mtx);
+
synchronize_net();
ieee80211_vif_release_channel(sdata);
drv_remove_interface(local, sdata);
kfree(sdata);
- out_unlock:
- mutex_unlock(&local->iflist_mtx);
}
/*
ieee80211_adjust_monitor_flags(sdata, 1);
ieee80211_configure_filter(local);
+ mutex_lock(&local->mtx);
+ ieee80211_recalc_idle(local);
+ mutex_unlock(&local->mtx);
netif_carrier_on(dev);
break;
ieee80211_adjust_monitor_flags(sdata, -1);
ieee80211_configure_filter(local);
+ mutex_lock(&local->mtx);
+ ieee80211_recalc_idle(local);
+ mutex_unlock(&local->mtx);
break;
case NL80211_IFTYPE_P2P_DEVICE:
/* relies on synchronize_rcu() below */
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list)
- if (ieee80211_vif_is_mesh(&sdata->vif))
+ if (ieee80211_vif_is_mesh(&sdata->vif) &&
+ ieee80211_sdata_running(sdata))
ieee80211_queue_work(&local->hw, &sdata->work);
rcu_read_unlock();
}
our_mcs = (le16_to_cpu(vht_cap.vht_mcs.rx_mcs_map) &
mask) >> shift;
+ if (our_mcs == IEEE80211_VHT_MCS_NOT_SUPPORTED)
+ continue;
+
switch (ap_mcs) {
default:
if (our_mcs <= ap_mcs)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ /*
+ * Stop timers before deleting work items, as timers
+ * could race and re-add the work-items. They will be
+ * re-established on connection.
+ */
+ del_timer_sync(&ifmgd->conn_mon_timer);
+ del_timer_sync(&ifmgd->bcn_mon_timer);
+
/*
* we need to use atomic bitops for the running bits
* only because both timers might fire at the same
if (del_timer_sync(&ifmgd->timer))
set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
- cancel_work_sync(&ifmgd->chswitch_work);
if (del_timer_sync(&ifmgd->chswitch_timer))
set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
-
- /* these will just be re-established on connection */
- del_timer_sync(&ifmgd->conn_mon_timer);
- del_timer_sync(&ifmgd->bcn_mon_timer);
+ cancel_work_sync(&ifmgd->chswitch_work);
}
void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
/* Restart STA timers */
rcu_read_lock();
- list_for_each_entry_rcu(sdata, &local->interfaces, list)
- ieee80211_restart_sta_timer(sdata);
+ list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+ if (ieee80211_sdata_running(sdata))
+ ieee80211_restart_sta_timer(sdata);
+ }
rcu_read_unlock();
}
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ /*
+ * Make sure some work items will not run after this,
+ * they will not do anything but might not have been
+ * cancelled when disconnecting.
+ */
+ cancel_work_sync(&ifmgd->monitor_work);
+ cancel_work_sync(&ifmgd->beacon_connection_loss_work);
+ cancel_work_sync(&ifmgd->request_smps_work);
+ cancel_work_sync(&ifmgd->csa_connection_drop_work);
+ cancel_work_sync(&ifmgd->chswitch_work);
+
mutex_lock(&ifmgd->mtx);
if (ifmgd->assoc_data)
ieee80211_destroy_assoc_data(sdata, false);
}
}
-void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc)
+void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc, bool free)
{
struct ieee80211_roc_work *dep, *tmp;
+ if (WARN_ON(roc->to_be_freed))
+ return;
+
/* was never transmitted */
if (roc->frame) {
cfg80211_mgmt_tx_status(&roc->sdata->wdev,
GFP_KERNEL);
list_for_each_entry_safe(dep, tmp, &roc->dependents, list)
- ieee80211_roc_notify_destroy(dep);
+ ieee80211_roc_notify_destroy(dep, true);
- kfree(roc);
+ if (free)
+ kfree(roc);
+ else
+ roc->to_be_freed = true;
}
void ieee80211_sw_roc_work(struct work_struct *work)
mutex_lock(&local->mtx);
+ if (roc->to_be_freed)
+ goto out_unlock;
+
if (roc->abort)
goto finish;
finish:
list_del(&roc->list);
started = roc->started;
- ieee80211_roc_notify_destroy(roc);
+ ieee80211_roc_notify_destroy(roc, !roc->abort);
if (started) {
drv_flush(local, false);
list_del(&roc->list);
- ieee80211_roc_notify_destroy(roc);
+ ieee80211_roc_notify_destroy(roc, true);
/* if there's another roc, start it now */
ieee80211_start_next_roc(local);
list_for_each_entry_safe(roc, tmp, &tmp_list, list) {
if (local->ops->remain_on_channel) {
list_del(&roc->list);
- ieee80211_roc_notify_destroy(roc);
+ ieee80211_roc_notify_destroy(roc, true);
} else {
ieee80211_queue_delayed_work(&local->hw, &roc->work, 0);
/* work will clean up etc */
flush_delayed_work(&roc->work);
+ WARN_ON(!roc->to_be_freed);
+ kfree(roc);
}
}
memset(nskb->cb, 0, sizeof(nskb->cb));
- ieee80211_tx_skb(rx->sdata, nskb);
+ if (rx->sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(nskb);
+
+ info->flags = IEEE80211_TX_CTL_TX_OFFCHAN |
+ IEEE80211_TX_INTFL_OFFCHAN_TX_OK |
+ IEEE80211_TX_CTL_NO_CCK_RATE;
+ if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)
+ info->hw_queue =
+ local->hw.offchannel_tx_hw_queue;
+ }
+
+ __ieee80211_tx_skb_tid_band(rx->sdata, nskb, 7,
+ status->band);
}
dev_kfree_skb(rx->skb);
return RX_QUEUED;
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
int ret, i;
+ bool have_key = false;
might_sleep();
list_del_rcu(&sta->list);
mutex_lock(&local->key_mtx);
- for (i = 0; i < NUM_DEFAULT_KEYS; i++)
+ for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
__ieee80211_key_free(key_mtx_dereference(local, sta->gtk[i]));
- if (sta->ptk)
+ have_key = true;
+ }
+ if (sta->ptk) {
__ieee80211_key_free(key_mtx_dereference(local, sta->ptk));
+ have_key = true;
+ }
mutex_unlock(&local->key_mtx);
+ if (!have_key)
+ synchronize_net();
+
sta->dead = true;
local->num_sta--;
cpu_to_le16(IEEE80211_FCTL_MOREDATA);
}
- sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
+ if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+ sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
if (!ieee80211_tx_prepare(sdata, &tx, skb))
break;
dev_kfree_skb_any(skb);
skb_reset_network_header(skb);
IP_VS_DBG(12, "ICMP for IPIP %pI4->%pI4: mtu=%u\n",
&ip_hdr(skb)->saddr, &ip_hdr(skb)->daddr, mtu);
- rcu_read_lock();
ipv4_update_pmtu(skb, dev_net(skb->dev),
mtu, 0, 0, 0, 0);
- rcu_read_unlock();
/* Client uses PMTUD? */
if (!(cih->frag_off & htons(IP_DF)))
goto ignore_ipip;
}
/* ipvs enabled in this netns ? */
net = skb_net(skb);
- if (!net_ipvs(net)->enable)
+ ipvs = net_ipvs(net);
+ if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
return NF_ACCEPT;
ip_vs_fill_iph_skb(af, skb, &iph);
}
IP_VS_DBG_PKT(11, af, pp, skb, 0, "Incoming packet");
- ipvs = net_ipvs(net);
/* Check the server status */
if (cp->dest && !(cp->dest->flags & IP_VS_DEST_F_AVAILABLE)) {
/* the destination server is not available */
{
int r;
struct net *net;
+ struct netns_ipvs *ipvs;
if (ip_hdr(skb)->protocol != IPPROTO_ICMP)
return NF_ACCEPT;
/* ipvs enabled in this netns ? */
net = skb_net(skb);
- if (!net_ipvs(net)->enable)
+ ipvs = net_ipvs(net);
+ if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
return NF_ACCEPT;
return ip_vs_in_icmp(skb, &r, hooknum);
{
int r;
struct net *net;
+ struct netns_ipvs *ipvs;
struct ip_vs_iphdr iphdr;
ip_vs_fill_iph_skb(AF_INET6, skb, &iphdr);
/* ipvs enabled in this netns ? */
net = skb_net(skb);
- if (!net_ipvs(net)->enable)
+ ipvs = net_ipvs(net);
+ if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
return NF_ACCEPT;
return ip_vs_in_icmp_v6(skb, &r, hooknum, &iphdr);
.mode = 0644,
.proc_handler = proc_dointvec,
},
+ {
+ .procname = "backup_only",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
#ifdef CONFIG_IP_VS_DEBUG
{
.procname = "debug_level",
tbl[idx++].data = &ipvs->sysctl_nat_icmp_send;
ipvs->sysctl_pmtu_disc = 1;
tbl[idx++].data = &ipvs->sysctl_pmtu_disc;
+ tbl[idx++].data = &ipvs->sysctl_backup_only;
ipvs->sysctl_hdr = register_net_sysctl(net, "net/ipv4/vs", tbl);
sctp_chunkhdr_t _sctpch, *sch;
unsigned char chunk_type;
int event, next_state;
- int ihl;
+ int ihl, cofs;
#ifdef CONFIG_IP_VS_IPV6
ihl = cp->af == AF_INET ? ip_hdrlen(skb) : sizeof(struct ipv6hdr);
ihl = ip_hdrlen(skb);
#endif
- sch = skb_header_pointer(skb, ihl + sizeof(sctp_sctphdr_t),
- sizeof(_sctpch), &_sctpch);
+ cofs = ihl + sizeof(sctp_sctphdr_t);
+ sch = skb_header_pointer(skb, cofs, sizeof(_sctpch), &_sctpch);
if (sch == NULL)
return;
*/
if ((sch->type == SCTP_CID_COOKIE_ECHO) ||
(sch->type == SCTP_CID_COOKIE_ACK)) {
- sch = skb_header_pointer(skb, (ihl + sizeof(sctp_sctphdr_t) +
- sch->length), sizeof(_sctpch), &_sctpch);
- if (sch) {
- if (sch->type == SCTP_CID_ABORT)
+ int clen = ntohs(sch->length);
+
+ if (clen >= sizeof(sctp_chunkhdr_t)) {
+ sch = skb_header_pointer(skb, cofs + ALIGN(clen, 4),
+ sizeof(_sctpch), &_sctpch);
+ if (sch && sch->type == SCTP_CID_ABORT)
chunk_type = sch->type;
}
}
{
const struct nf_conn_help *help;
const struct nf_conntrack_helper *helper;
+ struct va_format vaf;
+ va_list args;
+
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
/* Called from the helper function, this call never fails */
help = nfct_help(ct);
helper = rcu_dereference(help->helper);
nf_log_packet(nf_ct_l3num(ct), 0, skb, NULL, NULL, NULL,
- "nf_ct_%s: dropping packet: %s ", helper->name, fmt);
+ "nf_ct_%s: dropping packet: %pV ", helper->name, &vaf);
+
+ va_end(args);
}
EXPORT_SYMBOL_GPL(nf_ct_helper_log);
{
int ret;
+ ret = register_pernet_subsys(&dccp_net_ops);
+ if (ret < 0)
+ goto out_pernet;
+
ret = nf_ct_l4proto_register(&dccp_proto4);
if (ret < 0)
goto out_dccp4;
if (ret < 0)
goto out_dccp6;
- ret = register_pernet_subsys(&dccp_net_ops);
- if (ret < 0)
- goto out_pernet;
-
return 0;
-out_pernet:
- nf_ct_l4proto_unregister(&dccp_proto6);
out_dccp6:
nf_ct_l4proto_unregister(&dccp_proto4);
out_dccp4:
+ unregister_pernet_subsys(&dccp_net_ops);
+out_pernet:
return ret;
}
{
int ret;
- ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_gre4);
- if (ret < 0)
- goto out_gre4;
-
ret = register_pernet_subsys(&proto_gre_net_ops);
if (ret < 0)
goto out_pernet;
+ ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_gre4);
+ if (ret < 0)
+ goto out_gre4;
+
return 0;
-out_pernet:
- nf_ct_l4proto_unregister(&nf_conntrack_l4proto_gre4);
out_gre4:
+ unregister_pernet_subsys(&proto_gre_net_ops);
+out_pernet:
return ret;
}
{
int ret;
+ ret = register_pernet_subsys(&sctp_net_ops);
+ if (ret < 0)
+ goto out_pernet;
+
ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_sctp4);
if (ret < 0)
goto out_sctp4;
if (ret < 0)
goto out_sctp6;
- ret = register_pernet_subsys(&sctp_net_ops);
- if (ret < 0)
- goto out_pernet;
-
return 0;
-out_pernet:
- nf_ct_l4proto_unregister(&nf_conntrack_l4proto_sctp6);
out_sctp6:
nf_ct_l4proto_unregister(&nf_conntrack_l4proto_sctp4);
out_sctp4:
+ unregister_pernet_subsys(&sctp_net_ops);
+out_pernet:
return ret;
}
{
int ret;
+ ret = register_pernet_subsys(&udplite_net_ops);
+ if (ret < 0)
+ goto out_pernet;
+
ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_udplite4);
if (ret < 0)
goto out_udplite4;
if (ret < 0)
goto out_udplite6;
- ret = register_pernet_subsys(&udplite_net_ops);
- if (ret < 0)
- goto out_pernet;
-
return 0;
-out_pernet:
- nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udplite6);
out_udplite6:
nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udplite4);
out_udplite4:
+ unregister_pernet_subsys(&udplite_net_ops);
+out_pernet:
return ret;
}
register_net_sysctl(&init_net, "net", nf_ct_netfilter_table);
if (!nf_ct_netfilter_header) {
pr_err("nf_conntrack: can't register to sysctl.\n");
+ ret = -ENOMEM;
goto out_sysctl;
}
#endif
}
EXPORT_SYMBOL_GPL(nfnl_unlock);
-static struct mutex *nfnl_get_lock(__u8 subsys_id)
-{
- return &table[subsys_id].mutex;
-}
-
int nfnetlink_subsys_register(const struct nfnetlink_subsystem *n)
{
nfnl_lock(n->subsys_id);
rcu_read_unlock();
nfnl_lock(subsys_id);
if (rcu_dereference_protected(table[subsys_id].subsys,
- lockdep_is_held(nfnl_get_lock(subsys_id))) != ss ||
+ lockdep_is_held(&table[subsys_id].mutex)) != ss ||
nfnetlink_find_client(type, ss) != nc)
err = -EAGAIN;
else if (nc->call)
return -EINVAL;
acct_name = nla_data(tb[NFACCT_NAME]);
+ if (strlen(acct_name) == 0)
+ return -EINVAL;
list_for_each_entry(nfacct, &nfnl_acct_list, head) {
if (strncmp(nfacct->name, acct_name, NFACCT_NAME_MAX) != 0)
inst->queue_num = queue_num;
inst->peer_portid = portid;
inst->queue_maxlen = NFQNL_QMAX_DEFAULT;
- inst->copy_range = 0xfffff;
+ inst->copy_range = 0xffff;
inst->copy_mode = NFQNL_COPY_NONE;
spin_lock_init(&inst->lock);
INIT_LIST_HEAD(&inst->queue_list);
#ifdef CONFIG_PROC_FS
if (!proc_create("nfnetlink_queue", 0440,
- proc_net_netfilter, &nfqnl_file_ops))
+ proc_net_netfilter, &nfqnl_file_ops)) {
+ status = -ENOMEM;
goto cleanup_subsys;
+ }
#endif
register_netdevice_notifier(&nfqnl_dev_notifier);
const struct xt_audit_info *info = par->targinfo;
struct audit_buffer *ab;
+ if (audit_enabled == 0)
+ goto errout;
+
ab = audit_log_start(NULL, GFP_ATOMIC, AUDIT_NETFILTER_PKT);
if (ab == NULL)
goto errout;
struct netlbl_unlhsh_walk_arg cb_arg;
u32 skip_bkt = cb->args[0];
u32 skip_chain = cb->args[1];
- u32 skip_addr4 = cb->args[2];
- u32 skip_addr6 = cb->args[3];
u32 iter_bkt;
u32 iter_chain = 0, iter_addr4 = 0, iter_addr6 = 0;
struct netlbl_unlhsh_iface *iface;
continue;
netlbl_af4list_foreach_rcu(addr4,
&iface->addr4_list) {
- if (iter_addr4++ < skip_addr4)
+ if (iter_addr4++ < cb->args[2])
continue;
if (netlbl_unlabel_staticlist_gen(
NLBL_UNLABEL_C_STATICLIST,
#if IS_ENABLED(CONFIG_IPV6)
netlbl_af6list_foreach_rcu(addr6,
&iface->addr6_list) {
- if (iter_addr6++ < skip_addr6)
+ if (iter_addr6++ < cb->args[3])
continue;
if (netlbl_unlabel_staticlist_gen(
NLBL_UNLABEL_C_STATICLIST,
unlabel_staticlist_return:
rcu_read_unlock();
- cb->args[0] = skip_bkt;
- cb->args[1] = skip_chain;
- cb->args[2] = skip_addr4;
- cb->args[3] = skip_addr6;
+ cb->args[0] = iter_bkt;
+ cb->args[1] = iter_chain;
+ cb->args[2] = iter_addr4;
+ cb->args[3] = iter_addr6;
return skb->len;
}
{
struct netlbl_unlhsh_walk_arg cb_arg;
struct netlbl_unlhsh_iface *iface;
- u32 skip_addr4 = cb->args[0];
- u32 skip_addr6 = cb->args[1];
- u32 iter_addr4 = 0;
+ u32 iter_addr4 = 0, iter_addr6 = 0;
struct netlbl_af4list *addr4;
#if IS_ENABLED(CONFIG_IPV6)
- u32 iter_addr6 = 0;
struct netlbl_af6list *addr6;
#endif
goto unlabel_staticlistdef_return;
netlbl_af4list_foreach_rcu(addr4, &iface->addr4_list) {
- if (iter_addr4++ < skip_addr4)
+ if (iter_addr4++ < cb->args[0])
continue;
if (netlbl_unlabel_staticlist_gen(NLBL_UNLABEL_C_STATICLISTDEF,
iface,
}
#if IS_ENABLED(CONFIG_IPV6)
netlbl_af6list_foreach_rcu(addr6, &iface->addr6_list) {
- if (iter_addr6++ < skip_addr6)
+ if (iter_addr6++ < cb->args[1])
continue;
if (netlbl_unlabel_staticlist_gen(NLBL_UNLABEL_C_STATICLISTDEF,
iface,
unlabel_staticlistdef_return:
rcu_read_unlock();
- cb->args[0] = skip_addr4;
- cb->args[1] = skip_addr6;
+ cb->args[0] = iter_addr4;
+ cb->args[1] = iter_addr6;
return skb->len;
}
int err = 0;
BUG_ON(grp->name[0] == '\0');
+ BUG_ON(memchr(grp->name, '\0', GENL_NAMSIZ) == NULL);
genl_lock();
}
}
-static void nfc_llcp_socket_release(struct nfc_llcp_local *local, bool listen)
+static void nfc_llcp_socket_release(struct nfc_llcp_local *local, bool listen,
+ int err)
{
struct sock *sk;
struct hlist_node *tmp;
nfc_llcp_accept_unlink(accept_sk);
+ if (err)
+ accept_sk->sk_err = err;
accept_sk->sk_state = LLCP_CLOSED;
+ accept_sk->sk_state_change(sk);
bh_unlock_sock(accept_sk);
-
- sock_orphan(accept_sk);
}
if (listen == true) {
continue;
}
+ if (err)
+ sk->sk_err = err;
sk->sk_state = LLCP_CLOSED;
+ sk->sk_state_change(sk);
bh_unlock_sock(sk);
- sock_orphan(sk);
-
sk_del_node_init(sk);
}
write_unlock(&local->sockets.lock);
+
+ /*
+ * If we want to keep the listening sockets alive,
+ * we don't touch the RAW ones.
+ */
+ if (listen == true)
+ return;
+
+ write_lock(&local->raw_sockets.lock);
+
+ sk_for_each_safe(sk, tmp, &local->raw_sockets.head) {
+ llcp_sock = nfc_llcp_sock(sk);
+
+ bh_lock_sock(sk);
+
+ nfc_llcp_socket_purge(llcp_sock);
+
+ if (err)
+ sk->sk_err = err;
+ sk->sk_state = LLCP_CLOSED;
+ sk->sk_state_change(sk);
+
+ bh_unlock_sock(sk);
+
+ sk_del_node_init(sk);
+ }
+
+ write_unlock(&local->raw_sockets.lock);
}
struct nfc_llcp_local *nfc_llcp_local_get(struct nfc_llcp_local *local)
return local;
}
-static void local_release(struct kref *ref)
+static void local_cleanup(struct nfc_llcp_local *local, bool listen)
{
- struct nfc_llcp_local *local;
-
- local = container_of(ref, struct nfc_llcp_local, ref);
-
- list_del(&local->list);
- nfc_llcp_socket_release(local, false);
+ nfc_llcp_socket_release(local, listen, ENXIO);
del_timer_sync(&local->link_timer);
skb_queue_purge(&local->tx_queue);
cancel_work_sync(&local->tx_work);
cancel_work_sync(&local->rx_work);
cancel_work_sync(&local->timeout_work);
kfree_skb(local->rx_pending);
+}
+
+static void local_release(struct kref *ref)
+{
+ struct nfc_llcp_local *local;
+
+ local = container_of(ref, struct nfc_llcp_local, ref);
+
+ list_del(&local->list);
+ local_cleanup(local, false);
kfree(local);
}
skb_get(skb);
} else {
pr_err("Receive queue is full\n");
- kfree_skb(skb);
}
nfc_llcp_sock_put(llcp_sock);
skb_get(skb);
} else {
pr_err("Receive queue is full\n");
- kfree_skb(skb);
}
}
return;
/* Close and purge all existing sockets */
- nfc_llcp_socket_release(local, true);
+ nfc_llcp_socket_release(local, true, 0);
}
void nfc_llcp_mac_is_up(struct nfc_dev *dev, u32 target_idx,
return;
}
+ local_cleanup(local, false);
+
nfc_llcp_local_put(local);
}
}
if (sk->sk_state == LLCP_CONNECTED || !newsock) {
- nfc_llcp_accept_unlink(sk);
+ list_del_init(&lsk->accept_queue);
+ sock_put(sk);
+
if (newsock)
sock_graft(sk, newsock);
pr_debug("Returning sk state %d\n", sk->sk_state);
+ sk_acceptq_removed(parent);
+
return sk;
}
nfc_llcp_accept_unlink(accept_sk);
release_sock(accept_sk);
-
- sock_orphan(accept_sk);
}
}
if (skb->ip_summed == CHECKSUM_COMPLETE)
skb->csum = csum_sub(skb->csum, csum_partial(skb->data
- + ETH_HLEN, VLAN_HLEN, 0));
+ + (2 * ETH_ALEN), VLAN_HLEN, 0));
vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN);
*current_tci = vhdr->h_vlan_TCI;
if (skb->ip_summed == CHECKSUM_COMPLETE)
skb->csum = csum_add(skb->csum, csum_partial(skb->data
- + ETH_HLEN, VLAN_HLEN, 0));
+ + (2 * ETH_ALEN), VLAN_HLEN, 0));
}
__vlan_hwaccel_put_tag(skb, ntohs(vlan->vlan_tci) & ~VLAN_TAG_PRESENT);
skb_copy_and_csum_dev(skb, nla_data(nla));
+ genlmsg_end(user_skb, upcall);
err = genlmsg_unicast(net, user_skb, upcall_info->portid);
out:
if (IS_ERR(vport))
goto exit_unlock;
+ err = 0;
reply = ovs_vport_cmd_build_info(vport, info->snd_portid, info->snd_seq,
OVS_VPORT_CMD_NEW);
if (IS_ERR(reply)) {
if (IS_ERR(reply))
goto exit_unlock;
+ err = 0;
ovs_dp_detach_port(vport);
genl_notify(reply, genl_info_net(info), info->snd_portid,
return htons(ETH_P_802_2);
__skb_pull(skb, sizeof(struct llc_snap_hdr));
- return llc->ethertype;
+
+ if (ntohs(llc->ethertype) >= 1536)
+ return llc->ethertype;
+
+ return htons(ETH_P_802_2);
}
static int parse_icmpv6(struct sk_buff *skb, struct sw_flow_key *key,
/* Make our own copy of the packet. Otherwise we will mangle the
* packet for anyone who came before us (e.g. tcpdump via AF_PACKET).
- * (No one comes after us, since we tell handle_bridge() that we took
- * the packet.) */
+ */
skb = skb_share_check(skb, GFP_ATOMIC);
if (unlikely(!skb))
return;
* @skb: skb that was received
*
* Must be called with rcu_read_lock. The packet cannot be shared and
- * skb->data should point to the Ethernet header. The caller must have already
- * called compute_ip_summed() to initialize the checksumming fields.
+ * skb->data should point to the Ethernet header.
*/
void ovs_vport_receive(struct vport *vport, struct sk_buff *skb)
{
for (i = 0; i < nr; i++) {
BUG_ON(strlen(names[i]) >= sizeof(ctr.name));
strncpy(ctr.name, names[i], sizeof(ctr.name) - 1);
+ ctr.name[sizeof(ctr.name) - 1] = '\0';
ctr.value = values[i];
rds_info_copy(iter, &ctr, sizeof(ctr));
cbq_update(q);
if ((incr -= incr2) < 0)
incr = 0;
+ q->now += incr;
+ } else {
+ if (now > q->now)
+ q->now = now;
}
- q->now += incr;
q->now_rt = now;
for (;;) {
flow->deficit = q->quantum;
flow->dropped = 0;
}
- if (++sch->q.qlen < sch->limit)
+ if (++sch->q.qlen <= sch->limit)
return NET_XMIT_SUCCESS;
q->drop_overlimit++;
u64 mult;
int shift;
- r->rate_bps = rate << 3;
+ r->rate_bps = (u64)rate << 3;
r->shift = 0;
r->mult = 1;
/*
new_num_classes == q->max_agg_classes - 1) /* agg no more full */
hlist_add_head(&agg->nonfull_next, &q->nonfull_aggs);
+ /* The next assignment may let
+ * agg->initial_budget > agg->budgetmax
+ * hold, we will take it into account in charge_actual_service().
+ */
agg->budgetmax = new_num_classes * agg->lmax;
new_agg_weight = agg->class_weight * new_num_classes;
agg->inv_w = ONE_FP/new_agg_weight;
unsigned long old_vslot = q->oldV >> q->min_slot_shift;
if (vslot != old_vslot) {
- unsigned long mask = (1UL << fls(vslot ^ old_vslot)) - 1;
+ unsigned long mask = (1ULL << fls(vslot ^ old_vslot)) - 1;
qfq_move_groups(q, mask, IR, ER);
qfq_move_groups(q, mask, IB, EB);
}
/* Update F according to the actual service received by the aggregate. */
static inline void charge_actual_service(struct qfq_aggregate *agg)
{
- /* compute the service received by the aggregate */
- u32 service_received = agg->initial_budget - agg->budget;
+ /* Compute the service received by the aggregate, taking into
+ * account that, after decreasing the number of classes in
+ * agg, it may happen that
+ * agg->initial_budget - agg->budget > agg->bugdetmax
+ */
+ u32 service_received = min(agg->budgetmax,
+ agg->initial_budget - agg->budget);
agg->F = agg->S + (u64)service_received * agg->inv_w;
}
+static inline void qfq_update_agg_ts(struct qfq_sched *q,
+ struct qfq_aggregate *agg,
+ enum update_reason reason);
+
+static void qfq_schedule_agg(struct qfq_sched *q, struct qfq_aggregate *agg);
+
static struct sk_buff *qfq_dequeue(struct Qdisc *sch)
{
struct qfq_sched *q = qdisc_priv(sch);
in_serv_agg->initial_budget = in_serv_agg->budget =
in_serv_agg->budgetmax;
- if (!list_empty(&in_serv_agg->active))
+ if (!list_empty(&in_serv_agg->active)) {
/*
* Still active: reschedule for
* service. Possible optimization: if no other
* handle it, we would need to maintain an
* extra num_active_aggs field.
*/
- qfq_activate_agg(q, in_serv_agg, requeue);
- else if (sch->q.qlen == 0) { /* no aggregate to serve */
+ qfq_update_agg_ts(q, in_serv_agg, requeue);
+ qfq_schedule_agg(q, in_serv_agg);
+ } else if (sch->q.qlen == 0) { /* no aggregate to serve */
q->in_serv_agg = NULL;
return NULL;
}
qdisc_bstats_update(sch, skb);
agg_dequeue(in_serv_agg, cl, len);
- in_serv_agg->budget -= len;
+ /* If lmax is lowered, through qfq_change_class, for a class
+ * owning pending packets with larger size than the new value
+ * of lmax, then the following condition may hold.
+ */
+ if (unlikely(in_serv_agg->budget < len))
+ in_serv_agg->budget = 0;
+ else
+ in_serv_agg->budget -= len;
+
q->V += (u64)len * IWSUM;
pr_debug("qfq dequeue: len %u F %lld now %lld\n",
len, (unsigned long long) in_serv_agg->F,
cl->deficit = agg->lmax;
list_add_tail(&cl->alist, &agg->active);
- if (list_first_entry(&agg->active, struct qfq_class, alist) != cl)
- return err; /* aggregate was not empty, nothing else to do */
+ if (list_first_entry(&agg->active, struct qfq_class, alist) != cl ||
+ q->in_serv_agg == agg)
+ return err; /* non-empty or in service, nothing else to do */
- /* recharge budget */
- agg->initial_budget = agg->budget = agg->budgetmax;
-
- qfq_update_agg_ts(q, agg, enqueue);
- if (q->in_serv_agg == NULL)
- q->in_serv_agg = agg;
- else if (agg != q->in_serv_agg)
- qfq_schedule_agg(q, agg);
+ qfq_activate_agg(q, agg, enqueue);
return err;
}
/* group was surely ineligible, remove */
__clear_bit(grp->index, &q->bitmaps[IR]);
__clear_bit(grp->index, &q->bitmaps[IB]);
- } else if (!q->bitmaps[ER] && qfq_gt(roundedS, q->V))
+ } else if (!q->bitmaps[ER] && qfq_gt(roundedS, q->V) &&
+ q->in_serv_agg == NULL)
q->V = roundedS;
grp->S = roundedS;
static void qfq_activate_agg(struct qfq_sched *q, struct qfq_aggregate *agg,
enum update_reason reason)
{
+ agg->initial_budget = agg->budget = agg->budgetmax; /* recharge budg. */
+
qfq_update_agg_ts(q, agg, reason);
- qfq_schedule_agg(q, agg);
+ if (q->in_serv_agg == NULL) { /* no aggr. in service or scheduled */
+ q->in_serv_agg = agg; /* start serving this aggregate */
+ /* update V: to be in service, agg must be eligible */
+ q->oldV = q->V = agg->S;
+ } else if (agg != q->in_serv_agg)
+ qfq_schedule_agg(q, agg);
}
static void qfq_slot_remove(struct qfq_sched *q, struct qfq_group *grp,
__set_bit(grp->index, &q->bitmaps[s]);
}
}
-
- qfq_update_eligible(q);
}
static void qfq_qlen_notify(struct Qdisc *sch, unsigned long arg)
transports) {
if (transport == active)
- break;
+ continue;
list_for_each_entry(chunk, &transport->transmitted,
transmitted_list) {
if (key == chunk->subh.data_hdr->tsn) {
}
/* Delete the tempory new association. */
- sctp_add_cmd_sf(commands, SCTP_CMD_NEW_ASOC, SCTP_ASOC(new_asoc));
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_ASOC, SCTP_ASOC(new_asoc));
sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL());
/* Restore association pointer to provide SCTP command interpeter
else {
int N, i;
+ /*
+ * NOTE: we skip uid_valid()/gid_valid() checks here:
+ * instead, * -1 id's are later mapped to the
+ * (export-specific) anonymous id by nfsd_setuser.
+ *
+ * (But supplementary gid's get no such special
+ * treatment so are checked for validity here.)
+ */
/* uid */
rsci.cred.cr_uid = make_kuid(&init_user_ns, id);
- if (!uid_valid(rsci.cred.cr_uid))
- goto out;
/* gid */
if (get_int(&mesg, &id))
goto out;
rsci.cred.cr_gid = make_kgid(&init_user_ns, id);
- if (!gid_valid(rsci.cred.cr_gid))
- goto out;
/* number of additional gid's */
if (get_int(&mesg, &N))
.kill_sb = rpc_kill_sb,
};
MODULE_ALIAS_FS("rpc_pipefs");
+MODULE_ALIAS("rpc_pipefs");
static void
init_once(void *foo)
list_add_tail(&task->u.tk_wait.list, &queue->tasks[0]);
task->tk_waitqueue = queue;
queue->qlen++;
+ /* barrier matches the read in rpc_wake_up_task_queue_locked() */
+ smp_wmb();
rpc_set_queued(task);
dprintk("RPC: %5u added to queue %p \"%s\"\n",
*/
static void rpc_wake_up_task_queue_locked(struct rpc_wait_queue *queue, struct rpc_task *task)
{
- if (RPC_IS_QUEUED(task) && task->tk_waitqueue == queue)
- __rpc_do_wake_up_task(queue, task);
+ if (RPC_IS_QUEUED(task)) {
+ smp_rmb();
+ if (task->tk_waitqueue == queue)
+ __rpc_do_wake_up_task(queue, task);
+ }
}
/*
xs_tcp_shutdown(xprt);
}
+static void xs_local_destroy(struct rpc_xprt *xprt)
+{
+ xs_close(xprt);
+ xs_free_peer_addresses(xprt);
+ xprt_free(xprt);
+ module_put(THIS_MODULE);
+}
+
/**
* xs_destroy - prepare to shutdown a transport
* @xprt: doomed transport
cancel_delayed_work_sync(&transport->connect_worker);
- xs_close(xprt);
- xs_free_peer_addresses(xprt);
- xprt_free(xprt);
- module_put(THIS_MODULE);
+ xs_local_destroy(xprt);
}
static inline struct rpc_xprt *xprt_from_sock(struct sock *sk)
.send_request = xs_local_send_request,
.set_retrans_timeout = xprt_set_retrans_timeout_def,
.close = xs_close,
- .destroy = xs_destroy,
+ .destroy = xs_local_destroy,
.print_stats = xs_local_print_stats,
};
#endif
}
-static int unix_release_sock(struct sock *sk, int embrion)
+static void unix_release_sock(struct sock *sk, int embrion)
{
struct unix_sock *u = unix_sk(sk);
struct path path;
if (unix_tot_inflight)
unix_gc(); /* Garbage collect fds */
-
- return 0;
}
static void init_peercred(struct sock *sk)
if (!sk)
return 0;
+ unix_release_sock(sk, 0);
sock->sk = NULL;
- return unix_release_sock(sk, 0);
+ return 0;
}
static int unix_autobind(struct socket *sock)
if ((UNIXCB(skb).pid != siocb->scm->pid) ||
(UNIXCB(skb).cred != siocb->scm->cred))
break;
- } else {
+ } else if (test_bit(SOCK_PASSCRED, &sock->flags)) {
/* Copy credentials */
scm_set_cred(siocb->scm, UNIXCB(skb).pid, UNIXCB(skb).cred);
check_creds = 1;
struct vsock_sock *vsk;
list_for_each_entry(vsk, vsock_bound_sockets(addr), bound_table)
- if (vsock_addr_equals_addr_any(addr, &vsk->local_addr))
+ if (addr->svm_port == vsk->local_addr.svm_port)
return sk_vsock(vsk);
return NULL;
list_for_each_entry(vsk, vsock_connected_sockets(src, dst),
connected_table) {
- if (vsock_addr_equals_addr(src, &vsk->remote_addr)
- && vsock_addr_equals_addr(dst, &vsk->local_addr)) {
+ if (vsock_addr_equals_addr(src, &vsk->remote_addr) &&
+ dst->svm_port == vsk->local_addr.svm_port) {
return sk_vsock(vsk);
}
}
struct vsock_sock *vlistener;
struct vsock_sock *vpending;
struct sock *pending;
+ struct sockaddr_vm src;
+
+ vsock_addr_init(&src, pkt->dg.src.context, pkt->src_port);
vlistener = vsock_sk(listener);
list_for_each_entry(vpending, &vlistener->pending_links,
pending_links) {
- struct sockaddr_vm src;
- struct sockaddr_vm dst;
-
- vsock_addr_init(&src, pkt->dg.src.context, pkt->src_port);
- vsock_addr_init(&dst, pkt->dg.dst.context, pkt->dst_port);
-
if (vsock_addr_equals_addr(&src, &vpending->remote_addr) &&
- vsock_addr_equals_addr(&dst, &vpending->local_addr)) {
+ pkt->dst_port == vpending->local_addr.svm_port) {
pending = sk_vsock(vpending);
sock_hold(pending);
goto found;
*/
bh_lock_sock(sk);
- if (!sock_owned_by_user(sk) && sk->sk_state == SS_CONNECTED)
- vmci_trans(vsk)->notify_ops->handle_notify_pkt(
- sk, pkt, true, &dst, &src,
- &bh_process_pkt);
+ if (!sock_owned_by_user(sk)) {
+ /* The local context ID may be out of date, update it. */
+ vsk->local_addr.svm_cid = dst.svm_cid;
+
+ if (sk->sk_state == SS_CONNECTED)
+ vmci_trans(vsk)->notify_ops->handle_notify_pkt(
+ sk, pkt, true, &dst, &src,
+ &bh_process_pkt);
+ }
bh_unlock_sock(sk);
lock_sock(sk);
+ /* The local context ID may be out of date. */
+ vsock_sk(sk)->local_addr.svm_cid = pkt->dg.dst.context;
+
switch (sk->sk_state) {
case SS_LISTEN:
vmci_transport_recv_listen(sk, pkt);
pending = vmci_transport_get_pending(sk, pkt);
if (pending) {
lock_sock(pending);
+
+ /* The local context ID may be out of date. */
+ vsock_sk(pending)->local_addr.svm_cid = pkt->dg.dst.context;
+
switch (pending->sk_state) {
case SS_CONNECTING:
err = vmci_transport_recv_connecting_server(sk,
}
EXPORT_SYMBOL_GPL(vsock_addr_equals_addr);
-bool vsock_addr_equals_addr_any(const struct sockaddr_vm *addr,
- const struct sockaddr_vm *other)
-{
- return (addr->svm_cid == VMADDR_CID_ANY ||
- other->svm_cid == VMADDR_CID_ANY ||
- addr->svm_cid == other->svm_cid) &&
- addr->svm_port == other->svm_port;
-}
-EXPORT_SYMBOL_GPL(vsock_addr_equals_addr_any);
-
int vsock_addr_cast(const struct sockaddr *addr,
size_t len, struct sockaddr_vm **out_addr)
{
void vsock_addr_unbind(struct sockaddr_vm *addr);
bool vsock_addr_equals_addr(const struct sockaddr_vm *addr,
const struct sockaddr_vm *other);
-bool vsock_addr_equals_addr_any(const struct sockaddr_vm *addr,
- const struct sockaddr_vm *other);
int vsock_addr_cast(const struct sockaddr *addr, size_t len,
struct sockaddr_vm **out_addr);
rdev_rfkill_poll(rdev);
}
+void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev)
+{
+ lockdep_assert_held(&rdev->devlist_mtx);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
+
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_P2P_DEVICE))
+ return;
+
+ if (!wdev->p2p_started)
+ return;
+
+ rdev_stop_p2p_device(rdev, wdev);
+ wdev->p2p_started = false;
+
+ rdev->opencount--;
+
+ if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
+ bool busy = work_busy(&rdev->scan_done_wk);
+
+ /*
+ * If the work isn't pending or running (in which case it would
+ * be waiting for the lock we hold) the driver didn't properly
+ * cancel the scan when the interface was removed. In this case
+ * warn and leak the scan request object to not crash later.
+ */
+ WARN_ON(!busy);
+
+ rdev->scan_req->aborted = true;
+ ___cfg80211_scan_done(rdev, !busy);
+ }
+}
+
static int cfg80211_rfkill_set_block(void *data, bool blocked)
{
struct cfg80211_registered_device *rdev = data;
return 0;
rtnl_lock();
- mutex_lock(&rdev->devlist_mtx);
+
+ /* read-only iteration need not hold the devlist_mtx */
list_for_each_entry(wdev, &rdev->wdev_list, list) {
if (wdev->netdev) {
/* otherwise, check iftype */
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
- if (!wdev->p2p_started)
- break;
- rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
- rdev->opencount--;
+ /* but this requires it */
+ mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
+ cfg80211_stop_p2p_device(rdev, wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
+ mutex_unlock(&rdev->devlist_mtx);
break;
default:
break;
}
}
- mutex_unlock(&rdev->devlist_mtx);
rtnl_unlock();
return 0;
rdev->wiphy.rts_threshold = (u32) -1;
rdev->wiphy.coverage_class = 0;
- rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH |
- NL80211_FEATURE_ADVERTISE_CHAN_LIMITS;
+ rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH;
return &rdev->wiphy;
}
wdev = container_of(work, struct wireless_dev, cleanup_work);
rdev = wiphy_to_dev(wdev->wiphy);
- cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) {
rdev->scan_req->aborted = true;
___cfg80211_scan_done(rdev, true);
}
- cfg80211_unlock_rdev(rdev);
-
- mutex_lock(&rdev->sched_scan_mtx);
-
if (WARN_ON(rdev->sched_scan_req &&
rdev->sched_scan_req->dev == wdev->netdev)) {
__cfg80211_stop_sched_scan(rdev, false);
return;
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
list_del_rcu(&wdev->list);
rdev->devlist_generation++;
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
- if (!wdev->p2p_started)
- break;
- rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
- rdev->opencount--;
+ cfg80211_stop_p2p_device(rdev, wdev);
break;
default:
WARN_ON_ONCE(1);
break;
}
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
}
EXPORT_SYMBOL(cfg80211_unregister_wdev);
cfg80211_update_iface_num(rdev, wdev->iftype, 1);
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
switch (wdev->iftype) {
#ifdef CONFIG_CFG80211_WEXT
break;
}
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
rdev->opencount++;
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
enum nl80211_iftype iftype, int num);
+void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev);
+
#define CFG80211_MAX_NUM_DIFFERENT_CHANNELS 10
#ifdef CONFIG_CFG80211_DEVELOPER_WARNINGS
if ((chan->flags & IEEE80211_CHAN_RADAR) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR))
goto nla_put_failure;
- if ((chan->flags & IEEE80211_CHAN_NO_HT40MINUS) &&
- nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS))
- goto nla_put_failure;
- if ((chan->flags & IEEE80211_CHAN_NO_HT40PLUS) &&
- nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_PLUS))
- goto nla_put_failure;
- if ((chan->flags & IEEE80211_CHAN_NO_80MHZ) &&
- nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_80MHZ))
- goto nla_put_failure;
- if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) &&
- nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ))
- goto nla_put_failure;
if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
DBM_TO_MBM(chan->max_power)))
dev->wiphy.max_acl_mac_addrs))
goto nla_put_failure;
- if (dev->wiphy.extended_capabilities &&
- (nla_put(msg, NL80211_ATTR_EXT_CAPA,
- dev->wiphy.extended_capabilities_len,
- dev->wiphy.extended_capabilities) ||
- nla_put(msg, NL80211_ATTR_EXT_CAPA_MASK,
- dev->wiphy.extended_capabilities_len,
- dev->wiphy.extended_capabilities_mask)))
- goto nla_put_failure;
-
return genlmsg_end(msg, hdr);
nla_put_failure:
static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
{
- int idx = 0;
+ int idx = 0, ret;
int start = cb->args[0];
struct cfg80211_registered_device *dev;
continue;
if (++idx <= start)
continue;
- if (nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid,
- cb->nlh->nlmsg_seq, NLM_F_MULTI,
- dev) < 0) {
+ ret = nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid,
+ cb->nlh->nlmsg_seq, NLM_F_MULTI,
+ dev);
+ if (ret < 0) {
+ /*
+ * If sending the wiphy data didn't fit (ENOBUFS or
+ * EMSGSIZE returned), this SKB is still empty (so
+ * it's not too big because another wiphy dataset is
+ * already in the skb) and we've not tried to adjust
+ * the dump allocation yet ... then adjust the alloc
+ * size to be bigger, and return 1 but with the empty
+ * skb. This results in an empty message being RX'ed
+ * in userspace, but that is ignored.
+ *
+ * We can then retry with the larger buffer.
+ */
+ if ((ret == -ENOBUFS || ret == -EMSGSIZE) &&
+ !skb->len &&
+ cb->min_dump_alloc < 4096) {
+ cb->min_dump_alloc = 4096;
+ mutex_unlock(&cfg80211_mutex);
+ return 1;
+ }
idx--;
break;
}
struct sk_buff *msg;
struct cfg80211_registered_device *dev = info->user_ptr[0];
- msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ msg = nlmsg_new(4096, GFP_KERNEL);
if (!msg)
return -ENOMEM;
if (!rdev->ops->scan)
return -EOPNOTSUPP;
- if (rdev->scan_req)
- return -EBUSY;
+ mutex_lock(&rdev->sched_scan_mtx);
+ if (rdev->scan_req) {
+ err = -EBUSY;
+ goto unlock;
+ }
if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
n_channels = validate_scan_freqs(
info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
- if (!n_channels)
- return -EINVAL;
+ if (!n_channels) {
+ err = -EINVAL;
+ goto unlock;
+ }
} else {
enum ieee80211_band band;
n_channels = 0;
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp)
n_ssids++;
- if (n_ssids > wiphy->max_scan_ssids)
- return -EINVAL;
+ if (n_ssids > wiphy->max_scan_ssids) {
+ err = -EINVAL;
+ goto unlock;
+ }
if (info->attrs[NL80211_ATTR_IE])
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
else
ie_len = 0;
- if (ie_len > wiphy->max_scan_ie_len)
- return -EINVAL;
+ if (ie_len > wiphy->max_scan_ie_len) {
+ err = -EINVAL;
+ goto unlock;
+ }
request = kzalloc(sizeof(*request)
+ sizeof(*request->ssids) * n_ssids
+ sizeof(*request->channels) * n_channels
+ ie_len, GFP_KERNEL);
- if (!request)
- return -ENOMEM;
+ if (!request) {
+ err = -ENOMEM;
+ goto unlock;
+ }
if (n_ssids)
request->ssids = (void *)&request->channels[n_channels];
kfree(request);
}
+ unlock:
+ mutex_unlock(&rdev->sched_scan_mtx);
return err;
}
if (!rdev->ops->stop_p2p_device)
return -EOPNOTSUPP;
- if (!wdev->p2p_started)
- return 0;
-
- rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
-
- mutex_lock(&rdev->devlist_mtx);
- rdev->opencount--;
- mutex_unlock(&rdev->devlist_mtx);
-
- if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) {
- rdev->scan_req->aborted = true;
- ___cfg80211_scan_done(rdev, true);
- }
+ mutex_lock(&rdev->sched_scan_mtx);
+ cfg80211_stop_p2p_device(rdev, wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
return 0;
}
struct nlattr *nest;
int i;
- ASSERT_RDEV_LOCK(rdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
if (WARN_ON(!req))
return 0;
union iwreq_data wrqu;
#endif
- ASSERT_RDEV_LOCK(rdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
request = rdev->scan_req;
rdev = container_of(wk, struct cfg80211_registered_device,
scan_done_wk);
- cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
___cfg80211_scan_done(rdev, false);
- cfg80211_unlock_rdev(rdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
}
void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
found = rb_find_bss(dev, tmp, BSS_CMP_REGULAR);
if (found) {
- found->pub.beacon_interval = tmp->pub.beacon_interval;
- found->pub.signal = tmp->pub.signal;
- found->pub.capability = tmp->pub.capability;
- found->ts = tmp->ts;
-
/* Update IEs */
if (rcu_access_pointer(tmp->pub.proberesp_ies)) {
const struct cfg80211_bss_ies *old;
if (found->pub.hidden_beacon_bss &&
!list_empty(&found->hidden_list)) {
+ const struct cfg80211_bss_ies *f;
+
/*
* The found BSS struct is one of the probe
* response members of a group, but we're
* SSID to showing it, which is confusing so
* drop this information.
*/
+
+ f = rcu_access_pointer(tmp->pub.beacon_ies);
+ kfree_rcu((struct cfg80211_bss_ies *)f,
+ rcu_head);
goto drop;
}
kfree_rcu((struct cfg80211_bss_ies *)old,
rcu_head);
}
+
+ found->pub.beacon_interval = tmp->pub.beacon_interval;
+ found->pub.signal = tmp->pub.signal;
+ found->pub.capability = tmp->pub.capability;
+ found->ts = tmp->ts;
} else {
struct cfg80211_internal_bss *new;
struct cfg80211_internal_bss *hidden;
if (IS_ERR(rdev))
return PTR_ERR(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
if (rdev->scan_req) {
err = -EBUSY;
goto out;
dev_hold(dev);
}
out:
+ mutex_unlock(&rdev->sched_scan_mtx);
kfree(creq);
cfg80211_unlock_rdev(rdev);
return err;
ASSERT_RTNL();
ASSERT_RDEV_LOCK(rdev);
ASSERT_WDEV_LOCK(wdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
if (rdev->scan_req)
return -EBUSY;
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
- mutex_lock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx);
wdev_lock(wdev);
__cfg80211_sme_scan_done(dev);
wdev_unlock(wdev);
- mutex_unlock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx);
}
void cfg80211_sme_rx_auth(struct net_device *dev,
int err;
mutex_lock(&rdev->devlist_mtx);
+ /* might request scan - scan_mtx -> wdev_mtx dependency */
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(dev->ieee80211_ptr);
err = __cfg80211_connect(rdev, dev, connect, connkeys, NULL);
wdev_unlock(dev->ieee80211_ptr);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
return err;
#define WIPHY_PR_ARG __entry->wiphy_name
#define WDEV_ENTRY __field(u32, id)
-#define WDEV_ASSIGN (__entry->id) = (wdev ? wdev->identifier : 0)
+#define WDEV_ASSIGN (__entry->id) = (!IS_ERR_OR_NULL(wdev) \
+ ? wdev->identifier : 0)
#define WDEV_PR_FMT "wdev(%u)"
#define WDEV_PR_ARG (__entry->id)
),
TP_fast_assign(
WIPHY_ASSIGN;
- WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
__entry->acl_policy = params->acl_policy;
),
TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", acl policy: %d",
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
if (wdev->sme_state != CFG80211_SME_IDLE) {
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
err = 0;
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
if (wdev->sme_state != CFG80211_SME_IDLE) {
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
x->xflags &= ~XFRM_TIME_DEFER;
}
+static void xfrm_replay_notify_esn(struct xfrm_state *x, int event)
+{
+ u32 seq_diff, oseq_diff;
+ struct km_event c;
+ struct xfrm_replay_state_esn *replay_esn = x->replay_esn;
+ struct xfrm_replay_state_esn *preplay_esn = x->preplay_esn;
+
+ /* we send notify messages in case
+ * 1. we updated on of the sequence numbers, and the seqno difference
+ * is at least x->replay_maxdiff, in this case we also update the
+ * timeout of our timer function
+ * 2. if x->replay_maxage has elapsed since last update,
+ * and there were changes
+ *
+ * The state structure must be locked!
+ */
+
+ switch (event) {
+ case XFRM_REPLAY_UPDATE:
+ if (!x->replay_maxdiff)
+ break;
+
+ if (replay_esn->seq_hi == preplay_esn->seq_hi)
+ seq_diff = replay_esn->seq - preplay_esn->seq;
+ else
+ seq_diff = ~preplay_esn->seq + replay_esn->seq + 1;
+
+ if (replay_esn->oseq_hi == preplay_esn->oseq_hi)
+ oseq_diff = replay_esn->oseq - preplay_esn->oseq;
+ else
+ oseq_diff = ~preplay_esn->oseq + replay_esn->oseq + 1;
+
+ if (seq_diff < x->replay_maxdiff &&
+ oseq_diff < x->replay_maxdiff) {
+
+ if (x->xflags & XFRM_TIME_DEFER)
+ event = XFRM_REPLAY_TIMEOUT;
+ else
+ return;
+ }
+
+ break;
+
+ case XFRM_REPLAY_TIMEOUT:
+ if (memcmp(x->replay_esn, x->preplay_esn,
+ xfrm_replay_state_esn_len(replay_esn)) == 0) {
+ x->xflags |= XFRM_TIME_DEFER;
+ return;
+ }
+
+ break;
+ }
+
+ memcpy(x->preplay_esn, x->replay_esn,
+ xfrm_replay_state_esn_len(replay_esn));
+ c.event = XFRM_MSG_NEWAE;
+ c.data.aevent = event;
+ km_state_notify(x, &c);
+
+ if (x->replay_maxage &&
+ !mod_timer(&x->rtimer, jiffies + x->replay_maxage))
+ x->xflags &= ~XFRM_TIME_DEFER;
+}
+
static int xfrm_replay_overflow_esn(struct xfrm_state *x, struct sk_buff *skb)
{
int err = 0;
.advance = xfrm_replay_advance_esn,
.check = xfrm_replay_check_esn,
.recheck = xfrm_replay_recheck_esn,
- .notify = xfrm_replay_notify_bmp,
+ .notify = xfrm_replay_notify_esn,
.overflow = xfrm_replay_overflow_esn,
};
include $(kbuild-file)
# called may set destination dir (when installing to asm/)
-_dst := $(or $(destination-y),$(dst),$(obj))
+_dst := $(if $(destination-y),$(destination-y),$(if $(dst),$(dst),$(obj)))
old-kbuild-file := $(srctree)/$(subst uapi/,,$(obj))/Kbuild
ifneq ($(wildcard $(old-kbuild-file)),)
output-files := $(addprefix $(installdir)/, $(all-files))
input-files := $(foreach hdr, $(header-y), \
- $(or \
+ $(if $(wildcard $(srcdir)/$(hdr)), \
$(wildcard $(srcdir)/$(hdr)), \
- $(wildcard $(oldsrcdir)/$(hdr)), \
- $(error Missing UAPI file $(srcdir)/$(hdr)) \
+ $(if $(wildcard $(oldsrcdir)/$(hdr)), \
+ $(wildcard $(oldsrcdir)/$(hdr)), \
+ $(error Missing UAPI file $(srcdir)/$(hdr))) \
)) \
$(foreach hdr, $(genhdr-y), \
- $(or \
+ $(if $(wildcard $(gendir)/$(hdr)), \
$(wildcard $(gendir)/$(hdr)), \
$(error Missing generated UAPI file $(gendir)/$(hdr)) \
))
ARRAY_SIZE(iovstack),
iovstack, &iov);
if (ret < 0)
- return ret;
+ goto err;
if (ret == 0)
goto no_payload_free;
ret = keyctl_instantiate_key_common(id, iov, ioc, ret, ringid);
-
+err:
if (iov != iovstack)
kfree(iov);
return ret;
kenter("%p{%u}", user, uid);
- if (user->uid_keyring) {
+ if (user->uid_keyring && user->session_keyring) {
kleave(" = 0 [exist]");
return 0;
}
if (old_ctx) {
new_ctx = kmalloc(sizeof(*old_ctx) + old_ctx->ctx_len,
- GFP_KERNEL);
+ GFP_ATOMIC);
if (!new_ctx)
return -ENOMEM;
/* Only disallow PTRACE_TRACEME on more aggressive settings. */
switch (ptrace_scope) {
case YAMA_SCOPE_CAPABILITY:
- rcu_read_lock();
- if (!ns_capable(__task_cred(parent)->user_ns, CAP_SYS_PTRACE))
+ if (!has_ns_capability(parent, current_user_ns(), CAP_SYS_PTRACE))
rc = -EPERM;
- rcu_read_unlock();
break;
case YAMA_SCOPE_NO_ATTACH:
rc = -EPERM;
tid.device = SNDRV_TIMER_GLOBAL_SYSTEM;
err = snd_timer_open(&t, str, &tid, q->queue);
}
- if (err < 0) {
- snd_printk(KERN_ERR "seq fatal error: cannot create timer (%i)\n", err);
- return err;
- }
+ }
+ if (err < 0) {
+ snd_printk(KERN_ERR "seq fatal error: cannot create timer (%i)\n", err);
+ return err;
}
t->callback = snd_seq_timer_interrupt;
t->callback_data = q;
case MIDI_PGM_CHANGE:
if (seq_mode == SEQ_2)
{
+ if (chn > 15)
+ break;
+
synth_devs[dev]->chn_info[chn].pgm_num = p1;
if ((int) dev >= num_synths)
synth_devs[dev]->set_instr(dev, chn, p1);
case MIDI_PITCH_BEND:
if (seq_mode == SEQ_2)
{
+ if (chn > 15)
+ break;
+
synth_devs[dev]->chn_info[chn].bender_value = w14;
if ((int) dev < num_synths)
static int snd_card_asihpi_mixer_new(struct snd_card_asihpi *asihpi)
{
- struct snd_card *card = asihpi->card;
+ struct snd_card *card;
unsigned int idx = 0;
unsigned int subindex = 0;
int err;
if (snd_BUG_ON(!asihpi))
return -EINVAL;
+ card = asihpi->card;
strcpy(card->mixername, "Asihpi Mixer");
err =
"Line Out", "Speaker", "HP Out", "CD",
"SPDIF Out", "Digital Out", "Modem Line", "Modem Hand",
"Line In", "Aux", "Mic", "Telephony",
- "SPDIF In", "Digitial In", "Reserved", "Other"
+ "SPDIF In", "Digital In", "Reserved", "Other"
};
return jack_types[(cfg & AC_DEFCFG_DEVICE)
int snd_hda_get_num_raw_conns(struct hda_codec *codec, hda_nid_t nid)
{
- return get_num_conns(codec, nid) & AC_CLIST_LENGTH;
+ return snd_hda_get_raw_connections(codec, nid, NULL, 0);
}
/**
hda_nid_t prev_nid;
int null_count = 0;
- if (snd_BUG_ON(!conn_list || max_conns <= 0))
- return -EINVAL;
-
parm = get_num_conns(codec, nid);
if (!parm)
return 0;
AC_VERB_GET_CONNECT_LIST, 0);
if (parm == -1 && codec->bus->rirb_error)
return -EIO;
- conn_list[0] = parm & mask;
+ if (conn_list)
+ conn_list[0] = parm & mask;
return 1;
}
continue;
}
for (n = prev_nid + 1; n <= val; n++) {
+ if (conn_list) {
+ if (conns >= max_conns)
+ return -ENOSPC;
+ conn_list[conns] = n;
+ }
+ conns++;
+ }
+ } else {
+ if (conn_list) {
if (conns >= max_conns)
return -ENOSPC;
- conn_list[conns++] = n;
+ conn_list[conns] = val;
}
- } else {
- if (conns >= max_conns)
- return -ENOSPC;
- conn_list[conns++] = val;
+ conns++;
}
prev_nid = val;
}
if (val & AC_DIG1_PROFESSIONAL)
sbits |= IEC958_AES0_PROFESSIONAL;
if (sbits & IEC958_AES0_PROFESSIONAL) {
- if (sbits & AC_DIG1_EMPHASIS)
+ if (val & AC_DIG1_EMPHASIS)
sbits |= IEC958_AES0_PRO_EMPHASIS_5015;
} else {
if (val & AC_DIG1_EMPHASIS)
unsigned char *buf, int *eld_size)
{
int i;
- int ret;
+ int ret = 0;
int size;
/*
static void path_power_down_sync(struct hda_codec *codec, struct nid_path *path)
{
struct hda_gen_spec *spec = codec->spec;
- bool changed;
+ bool changed = false;
int i;
if (!spec->power_down_unused || path->active)
BAD_NO_EXTRA_SURR_DAC = 0x101,
/* Primary DAC shared with main surrounds */
BAD_SHARED_SURROUND = 0x100,
+ /* No independent HP possible */
+ BAD_NO_INDEP_HP = 0x40,
/* Primary DAC shared with main CLFE */
BAD_SHARED_CLFE = 0x10,
/* Primary DAC shared with extra surrounds */
return snd_hda_get_path_idx(codec, path);
}
+/* check whether the independent HP is available with the current config */
+static bool indep_hp_possible(struct hda_codec *codec)
+{
+ struct hda_gen_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ struct nid_path *path;
+ int i, idx;
+
+ if (cfg->line_out_type == AUTO_PIN_HP_OUT)
+ idx = spec->out_paths[0];
+ else
+ idx = spec->hp_paths[0];
+ path = snd_hda_get_path_from_idx(codec, idx);
+ if (!path)
+ return false;
+
+ /* assume no path conflicts unless aamix is involved */
+ if (!spec->mixer_nid || !is_nid_contained(path, spec->mixer_nid))
+ return true;
+
+ /* check whether output paths contain aamix */
+ for (i = 0; i < cfg->line_outs; i++) {
+ if (spec->out_paths[i] == idx)
+ break;
+ path = snd_hda_get_path_from_idx(codec, spec->out_paths[i]);
+ if (path && is_nid_contained(path, spec->mixer_nid))
+ return false;
+ }
+ for (i = 0; i < cfg->speaker_outs; i++) {
+ path = snd_hda_get_path_from_idx(codec, spec->speaker_paths[i]);
+ if (path && is_nid_contained(path, spec->mixer_nid))
+ return false;
+ }
+
+ return true;
+}
+
/* fill the empty entries in the dac array for speaker/hp with the
* shared dac pointed by the paths
*/
badness += BAD_MULTI_IO;
}
+ if (spec->indep_hp && !indep_hp_possible(codec))
+ badness += BAD_NO_INDEP_HP;
+
/* re-fill the shared DAC for speaker / headphone */
if (cfg->line_out_type != AUTO_PIN_HP_OUT)
refill_shared_dacs(codec, cfg->hp_outs,
cfg->speaker_pins, val);
}
+ /* clear indep_hp flag if not available */
+ if (spec->indep_hp && !indep_hp_possible(codec))
+ spec->indep_hp = 0;
+
kfree(best_cfg);
return 0;
}
* this may give more power-saving, but will take longer time to
* wake up.
*/
-static int power_save_controller = -1;
-module_param(power_save_controller, bint, 0644);
+static bool power_save_controller = 1;
+module_param(power_save_controller, bool, 0644);
MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode.");
#endif /* CONFIG_PM */
unsigned int opened :1;
unsigned int running :1;
unsigned int irq_pending :1;
+ unsigned int prepared:1;
+ unsigned int locked:1;
/*
* For VIA:
* A flag to ensure DMA position is 0
struct timecounter azx_tc;
struct cyclecounter azx_cc;
+
+#ifdef CONFIG_SND_HDA_DSP_LOADER
+ struct mutex dsp_mutex;
+#endif
};
+/* DSP lock helpers */
+#ifdef CONFIG_SND_HDA_DSP_LOADER
+#define dsp_lock_init(dev) mutex_init(&(dev)->dsp_mutex)
+#define dsp_lock(dev) mutex_lock(&(dev)->dsp_mutex)
+#define dsp_unlock(dev) mutex_unlock(&(dev)->dsp_mutex)
+#define dsp_is_locked(dev) ((dev)->locked)
+#else
+#define dsp_lock_init(dev) do {} while (0)
+#define dsp_lock(dev) do {} while (0)
+#define dsp_unlock(dev) do {} while (0)
+#define dsp_is_locked(dev) 0
+#endif
+
/* CORB/RIRB */
struct azx_rb {
u32 *buf; /* CORB/RIRB buffer
/* card list (for power_save trigger) */
struct list_head list;
+
+#ifdef CONFIG_SND_HDA_DSP_LOADER
+ struct azx_dev saved_azx_dev;
+#endif
};
#define CREATE_TRACE_POINTS
dev = chip->capture_index_offset;
nums = chip->capture_streams;
}
- for (i = 0; i < nums; i++, dev++)
- if (!chip->azx_dev[dev].opened) {
- res = &chip->azx_dev[dev];
- if (res->assigned_key == key)
- break;
+ for (i = 0; i < nums; i++, dev++) {
+ struct azx_dev *azx_dev = &chip->azx_dev[dev];
+ dsp_lock(azx_dev);
+ if (!azx_dev->opened && !dsp_is_locked(azx_dev)) {
+ res = azx_dev;
+ if (res->assigned_key == key) {
+ res->opened = 1;
+ res->assigned_key = key;
+ dsp_unlock(azx_dev);
+ return azx_dev;
+ }
}
+ dsp_unlock(azx_dev);
+ }
if (res) {
+ dsp_lock(res);
res->opened = 1;
res->assigned_key = key;
+ dsp_unlock(res);
}
return res;
}
struct azx_dev *azx_dev = get_azx_dev(substream);
int ret;
+ dsp_lock(azx_dev);
+ if (dsp_is_locked(azx_dev)) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
mark_runtime_wc(chip, azx_dev, substream, false);
azx_dev->bufsize = 0;
azx_dev->period_bytes = 0;
ret = snd_pcm_lib_malloc_pages(substream,
params_buffer_bytes(hw_params));
if (ret < 0)
- return ret;
+ goto unlock;
mark_runtime_wc(chip, azx_dev, substream, true);
+ unlock:
+ dsp_unlock(azx_dev);
return ret;
}
struct hda_pcm_stream *hinfo = apcm->hinfo[substream->stream];
/* reset BDL address */
- azx_sd_writel(azx_dev, SD_BDLPL, 0);
- azx_sd_writel(azx_dev, SD_BDLPU, 0);
- azx_sd_writel(azx_dev, SD_CTL, 0);
- azx_dev->bufsize = 0;
- azx_dev->period_bytes = 0;
- azx_dev->format_val = 0;
+ dsp_lock(azx_dev);
+ if (!dsp_is_locked(azx_dev)) {
+ azx_sd_writel(azx_dev, SD_BDLPL, 0);
+ azx_sd_writel(azx_dev, SD_BDLPU, 0);
+ azx_sd_writel(azx_dev, SD_CTL, 0);
+ azx_dev->bufsize = 0;
+ azx_dev->period_bytes = 0;
+ azx_dev->format_val = 0;
+ }
snd_hda_codec_cleanup(apcm->codec, hinfo, substream);
mark_runtime_wc(chip, azx_dev, substream, false);
+ azx_dev->prepared = 0;
+ dsp_unlock(azx_dev);
return snd_pcm_lib_free_pages(substream);
}
snd_hda_spdif_out_of_nid(apcm->codec, hinfo->nid);
unsigned short ctls = spdif ? spdif->ctls : 0;
+ dsp_lock(azx_dev);
+ if (dsp_is_locked(azx_dev)) {
+ err = -EBUSY;
+ goto unlock;
+ }
+
azx_stream_reset(chip, azx_dev);
format_val = snd_hda_calc_stream_format(runtime->rate,
runtime->channels,
snd_printk(KERN_ERR SFX
"%s: invalid format_val, rate=%d, ch=%d, format=%d\n",
pci_name(chip->pci), runtime->rate, runtime->channels, runtime->format);
- return -EINVAL;
+ err = -EINVAL;
+ goto unlock;
}
bufsize = snd_pcm_lib_buffer_bytes(substream);
azx_dev->no_period_wakeup = runtime->no_period_wakeup;
err = azx_setup_periods(chip, substream, azx_dev);
if (err < 0)
- return err;
+ goto unlock;
}
/* wallclk has 24Mhz clock source */
if ((chip->driver_caps & AZX_DCAPS_CTX_WORKAROUND) &&
stream_tag > chip->capture_streams)
stream_tag -= chip->capture_streams;
- return snd_hda_codec_prepare(apcm->codec, hinfo, stream_tag,
+ err = snd_hda_codec_prepare(apcm->codec, hinfo, stream_tag,
azx_dev->format_val, substream);
+
+ unlock:
+ if (!err)
+ azx_dev->prepared = 1;
+ dsp_unlock(azx_dev);
+ return err;
}
static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
azx_dev = get_azx_dev(substream);
trace_azx_pcm_trigger(chip, azx_dev, cmd);
+ if (dsp_is_locked(azx_dev) || !azx_dev->prepared)
+ return -EPIPE;
+
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
rstart = 1;
struct azx_dev *azx_dev;
int err;
- if (snd_hda_lock_devices(bus))
- return -EBUSY;
+ azx_dev = azx_get_dsp_loader_dev(chip);
+
+ dsp_lock(azx_dev);
+ spin_lock_irq(&chip->reg_lock);
+ if (azx_dev->running || azx_dev->locked) {
+ spin_unlock_irq(&chip->reg_lock);
+ err = -EBUSY;
+ goto unlock;
+ }
+ azx_dev->prepared = 0;
+ chip->saved_azx_dev = *azx_dev;
+ azx_dev->locked = 1;
+ spin_unlock_irq(&chip->reg_lock);
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG,
snd_dma_pci_data(chip->pci),
byte_size, bufp);
if (err < 0)
- goto unlock;
+ goto err_alloc;
mark_pages_wc(chip, bufp, true);
- azx_dev = azx_get_dsp_loader_dev(chip);
azx_dev->bufsize = byte_size;
azx_dev->period_bytes = byte_size;
azx_dev->format_val = format;
goto error;
azx_setup_controller(chip, azx_dev);
+ dsp_unlock(azx_dev);
return azx_dev->stream_tag;
error:
mark_pages_wc(chip, bufp, false);
snd_dma_free_pages(bufp);
-unlock:
- snd_hda_unlock_devices(bus);
+ err_alloc:
+ spin_lock_irq(&chip->reg_lock);
+ if (azx_dev->opened)
+ *azx_dev = chip->saved_azx_dev;
+ azx_dev->locked = 0;
+ spin_unlock_irq(&chip->reg_lock);
+ unlock:
+ dsp_unlock(azx_dev);
return err;
}
struct azx *chip = bus->private_data;
struct azx_dev *azx_dev = azx_get_dsp_loader_dev(chip);
- if (!dmab->area)
+ if (!dmab->area || !azx_dev->locked)
return;
+ dsp_lock(azx_dev);
/* reset BDL address */
azx_sd_writel(azx_dev, SD_BDLPL, 0);
azx_sd_writel(azx_dev, SD_BDLPU, 0);
snd_dma_free_pages(dmab);
dmab->area = NULL;
- snd_hda_unlock_devices(bus);
+ spin_lock_irq(&chip->reg_lock);
+ if (azx_dev->opened)
+ *azx_dev = chip->saved_azx_dev;
+ azx_dev->locked = 0;
+ spin_unlock_irq(&chip->reg_lock);
+ dsp_unlock(azx_dev);
}
#endif /* CONFIG_SND_HDA_DSP_LOADER */
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
- if (power_save_controller > 0)
- return 0;
if (!power_save_controller ||
!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
return -EBUSY;
}
for (i = 0; i < chip->num_streams; i++) {
+ dsp_lock_init(&chip->azx_dev[i]);
/* allocate memory for the BDL for each stream */
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
snd_dma_pci_data(chip->pci),
struct ca0132_spec *spec = codec->spec;
unsigned int tmp;
- if (!dspload_is_loaded(codec))
+ if (spec->dsp_state != DSP_DOWNLOADED)
return 0;
/* if CrystalVoice if off, vipsource should be 0 */
*/
static void ca0132_setup_defaults(struct hda_codec *codec)
{
+ struct ca0132_spec *spec = codec->spec;
unsigned int tmp;
int num_fx;
int idx, i;
- if (!dspload_is_loaded(codec))
+ if (spec->dsp_state != DSP_DOWNLOADED)
return;
/* out, in effects + voicefx */
return false;
dsp_os_image = (struct dsp_image_seg *)(fw_entry->data);
- dspload_image(codec, dsp_os_image, 0, 0, true, 0);
+ if (dspload_image(codec, dsp_os_image, 0, 0, true, 0)) {
+ pr_err("ca0132 dspload_image failed.\n");
+ goto exit_download;
+ }
+
dsp_loaded = dspload_wait_loaded(codec);
+exit_download:
release_firmware(fw_entry);
-
return dsp_loaded;
}
#ifndef CONFIG_SND_HDA_CODEC_CA0132_DSP
return; /* NOP */
#endif
- spec->dsp_state = DSP_DOWNLOAD_INIT;
- if (spec->dsp_state == DSP_DOWNLOAD_INIT) {
- chipio_enable_clocks(codec);
- spec->dsp_state = DSP_DOWNLOADING;
- if (!ca0132_download_dsp_images(codec))
- spec->dsp_state = DSP_DOWNLOAD_FAILED;
- else
- spec->dsp_state = DSP_DOWNLOADED;
- }
+ chipio_enable_clocks(codec);
+ spec->dsp_state = DSP_DOWNLOADING;
+ if (!ca0132_download_dsp_images(codec))
+ spec->dsp_state = DSP_DOWNLOAD_FAILED;
+ else
+ spec->dsp_state = DSP_DOWNLOADED;
if (spec->dsp_state == DSP_DOWNLOADED)
ca0132_set_dsp_msr(codec, true);
snd_hda_gen_update_outputs(codec);
if (spec->gpio_eapd_hp) {
- unsigned int gpio = spec->gen.hp_jack_present ?
+ spec->gpio_data = spec->gen.hp_jack_present ?
spec->gpio_eapd_hp : spec->gpio_eapd_speaker;
snd_hda_codec_write(codec, 0x01, 0,
- AC_VERB_SET_GPIO_DATA, gpio);
+ AC_VERB_SET_GPIO_DATA, spec->gpio_data);
}
}
if (!spec)
return -ENOMEM;
+ spec->gen.automute_hook = cs_automute;
+
snd_hda_pick_fixup(codec, cs420x_models, cs420x_fixup_tbl,
cs420x_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
if (!spec)
return -ENOMEM;
+ spec->gen.automute_hook = cs_automute;
+
snd_hda_pick_fixup(codec, cs421x_models, cs421x_fixup_tbl,
cs421x_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
}
if (spec->beep_amp)
- snd_hda_attach_beep_device(codec, spec->beep_amp);
+ snd_hda_attach_beep_device(codec, get_amp_nid_(spec->beep_amp));
return 0;
}
}
if (spec->beep_amp)
- snd_hda_attach_beep_device(codec, spec->beep_amp);
+ snd_hda_attach_beep_device(codec, get_amp_nid_(spec->beep_amp));
return 0;
}
}
if (spec->beep_amp)
- snd_hda_attach_beep_device(codec, spec->beep_amp);
+ snd_hda_attach_beep_device(codec, get_amp_nid_(spec->beep_amp));
return 0;
}
return 0;
}
+static void cx_auto_free(struct hda_codec *codec)
+{
+ snd_hda_detach_beep_device(codec);
+ snd_hda_gen_free(codec);
+}
+
static const struct hda_codec_ops cx_auto_patch_ops = {
.build_controls = cx_auto_build_controls,
.build_pcms = snd_hda_gen_build_pcms,
.init = snd_hda_gen_init,
- .free = snd_hda_gen_free,
+ .free = cx_auto_free,
.unsol_event = snd_hda_jack_unsol_event,
#ifdef CONFIG_PM
.check_power_status = snd_hda_gen_check_power_status,
codec->patch_ops = cx_auto_patch_ops;
if (spec->beep_amp)
- snd_hda_attach_beep_device(codec, spec->beep_amp);
+ snd_hda_attach_beep_device(codec, get_amp_nid_(spec->beep_amp));
/* Some laptops with Conexant chips show stalls in S3 resume,
* which falls into the single-cmd mode.
_snd_printd(SND_PR_VERBOSE,
"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
- codec->addr, pin_nid, eld->monitor_present, eld->eld_valid);
+ codec->addr, pin_nid, pin_eld->monitor_present, eld->eld_valid);
if (eld->eld_valid) {
if (snd_hdmi_get_eld(codec, pin_nid, eld->eld_buffer,
const hda_nid_t *ssids;
if (codec->vendor_id == 0x10ec0272 || codec->vendor_id == 0x10ec0663 ||
- codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670)
+ codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670 ||
+ codec->vendor_id == 0x10ec0671)
ssids = alc663_ssids;
else
ssids = alc662_ssids;
{ .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 },
{ .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 },
{ .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 },
+ { .id = 0x10ec0671, .name = "ALC671", .patch = patch_alc662 },
{ .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
return 0;
}
+/* check whether a built-in speaker is included in parsed pins */
+static bool has_builtin_speaker(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ hda_nid_t *nid_pin;
+ int nids, i;
+
+ if (spec->gen.autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT) {
+ nid_pin = spec->gen.autocfg.line_out_pins;
+ nids = spec->gen.autocfg.line_outs;
+ } else {
+ nid_pin = spec->gen.autocfg.speaker_pins;
+ nids = spec->gen.autocfg.speaker_outs;
+ }
+
+ for (i = 0; i < nids; i++) {
+ unsigned int def_conf = snd_hda_codec_get_pincfg(codec, nid_pin[i]);
+ if (snd_hda_get_input_pin_attr(def_conf) == INPUT_PIN_ATTR_INT)
+ return true;
+ }
+ return false;
+}
+
/*
* PC beep controls
*/
return err;
}
+ /* Don't GPIO-mute speakers if there are no internal speakers, because
+ * the GPIO might be necessary for Headphone
+ */
+ if (spec->eapd_switch && !has_builtin_speaker(codec))
+ spec->eapd_switch = 0;
+
codec->proc_widget_hook = stac92hd7x_proc_hook;
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S8:
width = SI476X_PCM_FORMAT_S8;
+ break;
case SNDRV_PCM_FORMAT_S16_LE:
width = SI476X_PCM_FORMAT_S16_LE;
break;
&buf_list);
if (!buf) {
adsp_err(dsp, "Out of memory\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_fw;
}
adsp_dbg(dsp, "%s.%d: Writing %d bytes at %x\n",
wm_adsp_buf_free(&buf_list);
out:
kfree(file);
- return 0;
+ return ret;
}
int wm_adsp1_init(struct wm_adsp *adsp)
if (imx_ssi->ac97_reset)
imx_ssi->ac97_reset(ac97);
+ /* First read sometimes fails, do a dummy read */
+ imx_ssi_ac97_read(ac97, 0);
}
static void imx_ssi_ac97_warm_reset(struct snd_ac97 *ac97)
if (imx_ssi->ac97_warm_reset)
imx_ssi->ac97_warm_reset(ac97);
+
+ /* First read sometimes fails, do a dummy read */
+ imx_ssi_ac97_read(ac97, 0);
}
struct snd_ac97_bus_ops soc_ac97_ops = {
.num_links = ARRAY_SIZE(pcm030_fabric_dai),
};
-static int __init pcm030_fabric_probe(struct platform_device *op)
+static int pcm030_fabric_probe(struct platform_device *op)
{
struct device_node *np = op->dev.of_node;
struct device_node *platform_np;
return 0;
}
-static struct snd_soc_platform sh7760_soc_platform = {
- .pcm_ops = &camelot_pcm_ops,
+static struct snd_soc_platform_driver sh7760_soc_platform = {
+ .ops = &camelot_pcm_ops,
.pcm_new = camelot_pcm_new,
.pcm_free = camelot_pcm_free,
};
if (params->mask) {
ret = regmap_read(codec->control_data, params->base, &val);
if (ret != 0)
- return ret;
+ goto out;
val &= params->mask;
((u32 *)data)[0] |= cpu_to_be32(val);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
}
ret = regmap_raw_write(codec->control_data, params->base,
data, len);
+out:
kfree(data);
return ret;
dev_err(card->dev,
"ASoC: Property '%s' index %d could not be read: %d\n",
propname, 2 * i, ret);
- kfree(routes);
return -EINVAL;
}
ret = of_property_read_string_index(np, propname,
dev_err(card->dev,
"ASoC: Property '%s' index %d could not be read: %d\n",
propname, (2 * i) + 1, ret);
- kfree(routes);
return -EINVAL;
}
}
if (path->weak)
continue;
+ if (path->walking)
+ return 1;
+
if (path->walked)
continue;
if (path->sink && path->connect) {
path->walked = 1;
+ path->walking = 1;
/* do we need to add this widget to the list ? */
if (list) {
dev_err(widget->dapm->dev,
"ASoC: could not add widget %s\n",
widget->name);
+ path->walking = 0;
return con;
}
}
con += is_connected_output_ep(path->sink, list);
+
+ path->walking = 0;
}
}
if (path->weak)
continue;
+ if (path->walking)
+ return 1;
+
if (path->walked)
continue;
if (path->source && path->connect) {
path->walked = 1;
+ path->walking = 1;
/* do we need to add this widget to the list ? */
if (list) {
dev_err(widget->dapm->dev,
"ASoC: could not add widget %s\n",
widget->name);
+ path->walking = 0;
return con;
}
}
con += is_connected_input_ep(path->source, list);
+
+ path->walking = 0;
}
}
static u64 spear_pcm_dmamask = DMA_BIT_MASK(32);
-static int spear_pcm_new(struct snd_card *card,
- struct snd_soc_dai *dai, struct snd_pcm *pcm)
+static int spear_pcm_new(struct snd_soc_pcm_runtime *rtd)
{
+ struct snd_card *card = rtd->card->snd_card;
int ret;
if (!card->dev->dma_mask)
if (!card->dev->coherent_dma_mask)
card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
- if (dai->driver->playback.channels_min) {
- ret = spear_pcm_preallocate_dma_buffer(pcm,
+ if (rtd->cpu_dai->driver->playback.channels_min) {
+ ret = spear_pcm_preallocate_dma_buffer(rtd->pcm,
SNDRV_PCM_STREAM_PLAYBACK,
spear_pcm_hardware.buffer_bytes_max);
if (ret)
return ret;
}
- if (dai->driver->capture.channels_min) {
- ret = spear_pcm_preallocate_dma_buffer(pcm,
+ if (rtd->cpu_dai->driver->capture.channels_min) {
+ ret = spear_pcm_preallocate_dma_buffer(rtd->pcm,
SNDRV_PCM_STREAM_CAPTURE,
spear_pcm_hardware.buffer_bytes_max);
if (ret)
struct usb_interface_assoc_descriptor *assoc =
usb_ifnum_to_if(dev, ctrlif)->intf_assoc;
+ if (!assoc) {
+ /*
+ * Firmware writers cannot count to three. So to find
+ * the IAD on the NuForce UDH-100, also check the next
+ * interface.
+ */
+ struct usb_interface *iface =
+ usb_ifnum_to_if(dev, ctrlif + 1);
+ if (iface &&
+ iface->intf_assoc &&
+ iface->intf_assoc->bFunctionClass == USB_CLASS_AUDIO &&
+ iface->intf_assoc->bFunctionProtocol == UAC_VERSION_2)
+ assoc = iface->intf_assoc;
+ }
+
if (!assoc) {
snd_printk(KERN_ERR "Audio class v2 interfaces need an interface association\n");
return -EINVAL;
{
struct usb_device *dev = chip->dev;
unsigned char data[4];
- int err, crate;
+ int err, cur_rate, prev_rate;
int clock = snd_usb_clock_find_source(chip, fmt->clock);
if (clock < 0)
return -ENXIO;
}
+ err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
+ data, sizeof(data));
+ if (err < 0) {
+ snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
+ dev->devnum, iface, fmt->altsetting);
+ prev_rate = 0;
+ } else {
+ prev_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
+ }
+
data[0] = rate;
data[1] = rate >> 8;
data[2] = rate >> 16;
return err;
}
- if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8,
- snd_usb_ctrl_intf(chip) | (clock << 8),
- data, sizeof(data))) < 0) {
+ err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
+ data, sizeof(data));
+ if (err < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
dev->devnum, iface, fmt->altsetting);
- return err;
+ cur_rate = 0;
+ } else {
+ cur_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
}
- crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
- if (crate != rate)
- snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+ if (cur_rate != rate) {
+ snd_printd(KERN_WARNING
+ "current rate %d is different from the runtime rate %d\n",
+ cur_rate, rate);
+ }
+
+ /* Some devices doesn't respond to sample rate changes while the
+ * interface is active. */
+ if (rate != prev_rate) {
+ usb_set_interface(dev, iface, 0);
+ usb_set_interface(dev, iface, fmt->altsetting);
+ }
return 0;
}
case UAC2_CLOCK_SELECTOR: {
struct uac_selector_unit_descriptor *d = p1;
/* call recursively to retrieve the channel info */
- if (check_input_term(state, d->baSourceID[0], term) < 0)
- return -ENODEV;
+ err = check_input_term(state, d->baSourceID[0], term);
+ if (err < 0)
+ return err;
term->type = d->bDescriptorSubtype << 16; /* virtual type */
term->id = id;
term->name = uac_selector_unit_iSelector(d);
case UAC1_PROCESSING_UNIT:
case UAC1_EXTENSION_UNIT:
/* UAC2_PROCESSING_UNIT_V2 */
- /* UAC2_EFFECT_UNIT */ {
+ /* UAC2_EFFECT_UNIT */
+ case UAC2_EXTENSION_UNIT_V2: {
struct uac_processing_unit_descriptor *d = p1;
if (state->mixer->protocol == UAC_VERSION_2 &&
return err;
/* determine the input source type and name */
- if (check_input_term(state, hdr->bSourceID, &iterm) < 0)
- return -EINVAL;
+ err = check_input_term(state, hdr->bSourceID, &iterm);
+ if (err < 0)
+ return err;
master_bits = snd_usb_combine_bytes(bmaControls, csize);
/* master configuration quirks */
return parse_audio_extension_unit(state, unitid, p1);
else /* UAC_VERSION_2 */
return parse_audio_processing_unit(state, unitid, p1);
+ case UAC2_EXTENSION_UNIT_V2:
+ return parse_audio_extension_unit(state, unitid, p1);
default:
snd_printk(KERN_ERR "usbaudio: unit %u: unexpected type 0x%02x\n", unitid, p1[2]);
return -EINVAL;
state.oterm.type = le16_to_cpu(desc->wTerminalType);
state.oterm.name = desc->iTerminal;
err = parse_audio_unit(&state, desc->bSourceID);
- if (err < 0)
+ if (err < 0 && err != -EINVAL)
return err;
} else { /* UAC_VERSION_2 */
struct uac2_output_terminal_descriptor *desc = p;
state.oterm.type = le16_to_cpu(desc->wTerminalType);
state.oterm.name = desc->iTerminal;
err = parse_audio_unit(&state, desc->bSourceID);
- if (err < 0)
+ if (err < 0 && err != -EINVAL)
return err;
/* for UAC2, use the same approach to also add the clock selectors */
err = parse_audio_unit(&state, desc->bCSourceID);
- if (err < 0)
+ if (err < 0 && err != -EINVAL)
return err;
}
}
EVENT_PARSE_VERSION = $(EP_VERSION).$(EP_PATCHLEVEL).$(EP_EXTRAVERSION)
-INCLUDES = -I. -I/usr/local/include $(CONFIG_INCLUDES)
+INCLUDES = -I. $(CONFIG_INCLUDES)
# Set compile option CFLAGS if not set elsewhere
CFLAGS ?= -g -Wall
PERF_DEBUG = $(DEBUG)
endif
ifndef PERF_DEBUG
- CFLAGS_OPTIMIZE = -O6 -D_FORTIFY_SOURCE=2
+ CFLAGS_OPTIMIZE = -O6
endif
ifdef PARSER_DEBUG
CFLAGS := $(CFLAGS) -Wvolatile-register-var
endif
+ifndef PERF_DEBUG
+ ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -D_FORTIFY_SOURCE=2,-D_FORTIFY_SOURCE=2),y)
+ CFLAGS := $(CFLAGS) -D_FORTIFY_SOURCE=2
+ endif
+endif
+
### --- END CONFIGURATION SECTION ---
ifeq ($(srctree),)
#ifndef BENCH_H
#define BENCH_H
+/*
+ * The madvise transparent hugepage constants were added in glibc
+ * 2.13. For compatibility with older versions of glibc, define these
+ * tokens if they are not already defined.
+ *
+ * PA-RISC uses different madvise values from other architectures and
+ * needs to be special-cased.
+ */
+#ifdef __hppa__
+# ifndef MADV_HUGEPAGE
+# define MADV_HUGEPAGE 67
+# endif
+# ifndef MADV_NOHUGEPAGE
+# define MADV_NOHUGEPAGE 68
+# endif
+#else
+# ifndef MADV_HUGEPAGE
+# define MADV_HUGEPAGE 14
+# endif
+# ifndef MADV_NOHUGEPAGE
+# define MADV_NOHUGEPAGE 15
+# endif
+#endif
+
extern int bench_numa(int argc, const char **argv, const char *prefix);
extern int bench_sched_messaging(int argc, const char **argv, const char *prefix);
extern int bench_sched_pipe(int argc, const char **argv, const char *prefix);
perf_event__synthesize_guest_os, tool);
}
- if (!opts->target.system_wide)
+ if (perf_target__has_task(&opts->target))
err = perf_event__synthesize_thread_map(tool, evsel_list->threads,
process_synthesized_event,
machine);
- else
+ else if (perf_target__has_cpu(&opts->target))
err = perf_event__synthesize_threads(tool, process_synthesized_event,
machine);
+ else /* command specified */
+ err = 0;
if (err != 0)
goto out_delete_session;
return 0;
}
-#define K_LEFT -1
-#define K_RIGHT -2
+#define K_LEFT -1000
+#define K_RIGHT -2000
+#define K_SWITCH_INPUT_DATA -3000
#endif
#ifdef GTK2_SUPPORT
slist->rblist.node_delete = strlist__node_delete;
slist->dupstr = dupstr;
- if (slist && strlist__parse_list(slist, list) != 0)
+ if (list && strlist__parse_list(slist, list) != 0)
goto out_error;
}
#include <unistd.h>
#include <tools/le_byteshift.h>
-#include "../../include/linux/usb/functionfs.h"
+#include "../../include/uapi/linux/usb/functionfs.h"
/******************** Little Endian Handling ********************************/
u32 redir_index = (ioapic->ioregsel - 0x10) >> 1;
u64 redir_content;
- ASSERT(redir_index < IOAPIC_NUM_PINS);
+ if (redir_index < IOAPIC_NUM_PINS)
+ redir_content =
+ ioapic->redirtbl[redir_index].bits;
+ else
+ redir_content = ~0ULL;
- redir_content = ioapic->redirtbl[redir_index].bits;
result = (ioapic->ioregsel & 0x1) ?
(redir_content >> 32) & 0xffffffff :
redir_content & 0xffffffff;
}
int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
- gpa_t gpa)
+ gpa_t gpa, unsigned long len)
{
struct kvm_memslots *slots = kvm_memslots(kvm);
int offset = offset_in_page(gpa);
- gfn_t gfn = gpa >> PAGE_SHIFT;
+ gfn_t start_gfn = gpa >> PAGE_SHIFT;
+ gfn_t end_gfn = (gpa + len - 1) >> PAGE_SHIFT;
+ gfn_t nr_pages_needed = end_gfn - start_gfn + 1;
+ gfn_t nr_pages_avail;
ghc->gpa = gpa;
ghc->generation = slots->generation;
- ghc->memslot = gfn_to_memslot(kvm, gfn);
- ghc->hva = gfn_to_hva_many(ghc->memslot, gfn, NULL);
- if (!kvm_is_error_hva(ghc->hva))
+ ghc->len = len;
+ ghc->memslot = gfn_to_memslot(kvm, start_gfn);
+ ghc->hva = gfn_to_hva_many(ghc->memslot, start_gfn, &nr_pages_avail);
+ if (!kvm_is_error_hva(ghc->hva) && nr_pages_avail >= nr_pages_needed) {
ghc->hva += offset;
- else
- return -EFAULT;
-
+ } else {
+ /*
+ * If the requested region crosses two memslots, we still
+ * verify that the entire region is valid here.
+ */
+ while (start_gfn <= end_gfn) {
+ ghc->memslot = gfn_to_memslot(kvm, start_gfn);
+ ghc->hva = gfn_to_hva_many(ghc->memslot, start_gfn,
+ &nr_pages_avail);
+ if (kvm_is_error_hva(ghc->hva))
+ return -EFAULT;
+ start_gfn += nr_pages_avail;
+ }
+ /* Use the slow path for cross page reads and writes. */
+ ghc->memslot = NULL;
+ }
return 0;
}
EXPORT_SYMBOL_GPL(kvm_gfn_to_hva_cache_init);
struct kvm_memslots *slots = kvm_memslots(kvm);
int r;
+ BUG_ON(len > ghc->len);
+
if (slots->generation != ghc->generation)
- kvm_gfn_to_hva_cache_init(kvm, ghc, ghc->gpa);
+ kvm_gfn_to_hva_cache_init(kvm, ghc, ghc->gpa, ghc->len);
+
+ if (unlikely(!ghc->memslot))
+ return kvm_write_guest(kvm, ghc->gpa, data, len);
if (kvm_is_error_hva(ghc->hva))
return -EFAULT;
struct kvm_memslots *slots = kvm_memslots(kvm);
int r;
+ BUG_ON(len > ghc->len);
+
if (slots->generation != ghc->generation)
- kvm_gfn_to_hva_cache_init(kvm, ghc, ghc->gpa);
+ kvm_gfn_to_hva_cache_init(kvm, ghc, ghc->gpa, ghc->len);
+
+ if (unlikely(!ghc->memslot))
+ return kvm_read_guest(kvm, ghc->gpa, data, len);
if (kvm_is_error_hva(ghc->hva))
return -EFAULT;
projects / ~andy / linux / commitdiff