support" be compiled as a module for this driver to be used
properly.
+config USB_SERIAL_SIMPLE
+ tristate "USB Serial Simple Driver"
+ help
+ Say Y here to use the USB serial "simple" driver. This driver
+ handles a wide range of very simple devices, all in one
+ driver. Specifically, it supports:
+ - Suunto ANT+ USB device.
+ - Fundamental Software dongle.
+ - HP4x calculators
+ - a number of Motoroloa phones
+ - Siemens USB/MPI adapter.
+ - ViVOtech ViVOpay USB device.
+ - Infineon Modem Flashloader USB interface
+ - ZIO Motherboard USB serial interface
+
+ To compile this driver as a module, choose M here: the module
+ will be called usb-serial-simple.
+
config USB_SERIAL_AIRCABLE
tristate "USB AIRcable Bluetooth Dongle Driver"
help
To compile this driver as a module, choose M here: the
module will be called ftdi_sio.
-config USB_SERIAL_FUNSOFT
- tristate "USB Fundamental Software Dongle Driver"
- ---help---
- Say Y here if you want to use the Fundamental Software dongle.
-
- To compile this driver as a module, choose M here: the
- module will be called funsoft.
-
config USB_SERIAL_VISOR
tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
help
To compile this driver as a module, choose M here: the
module will be called mos7840. If unsure, choose N.
-config USB_SERIAL_MOTOROLA
- tristate "USB Motorola Phone modem driver"
- ---help---
- Say Y here if you want to use a Motorola phone with a USB
- connector as a modem link.
-
- To compile this driver as a module, choose M here: the
- module will be called moto_modem. If unsure, choose N.
-
config USB_SERIAL_NAVMAN
tristate "USB Navman GPS device"
help
To compile this driver as a module, choose M here: the
module will be called spcp8x5.
-config USB_SERIAL_HP4X
- tristate "USB HP4x Calculators support"
- help
- Say Y here if you want to use an Hewlett-Packard 4x Calculator.
-
- To compile this driver as a module, choose M here: the
- module will be called hp4x.
-
config USB_SERIAL_SAFE
tristate "USB Safe Serial (Encapsulated) Driver"
bool "USB Secure Encapsulated Driver - Padded"
depends on USB_SERIAL_SAFE
-config USB_SERIAL_SIEMENS_MPI
- tristate "USB Siemens MPI driver"
- help
- Say M here if you want to use a Siemens USB/MPI adapter.
-
- To compile this driver as a module, choose M here: the
- module will be called siemens_mpi.
-
config USB_SERIAL_SIERRAWIRELESS
tristate "USB Sierra Wireless Driver"
help
To compile this driver as a module, choose M here: the
module will be called opticon.
-config USB_SERIAL_VIVOPAY_SERIAL
- tristate "USB ViVOpay serial interface driver"
- help
- Say Y here if you want to use a ViVOtech ViVOpay USB device.
-
- To compile this driver as a module, choose M here: the
- module will be called vivopay-serial.
-
config USB_SERIAL_XSENS_MT
tristate "Xsens motion tracker serial interface driver"
help
To compile this driver as a module, choose M here: the
module will be called xsens_mt.
-config USB_SERIAL_ZIO
- tristate "ZIO Motherboard USB serial interface driver"
- help
- Say Y here if you want to use ZIO Motherboard.
-
- To compile this driver as a module, choose M here: the
- module will be called zio.
-
config USB_SERIAL_WISHBONE
tristate "USB-Wishbone adapter interface driver"
help
To compile this driver as a module, choose M here: the
module will be called quatech-serial.
-config USB_SERIAL_FLASHLOADER
- tristate "Infineon Modem Flashloader USB interface driver"
- help
- Say Y here if you want to download Infineon Modem
- via USB Flashloader serial driver.
-
- To compile this driver as a module, choose M here: the
- module will be called flashloader.
-
-config USB_SERIAL_SUUNTO
- tristate "USB Suunto ANT+ driver"
- help
- Say Y here if you want to use the Suunto ANT+ USB device.
-
- To compile this driver as a module, choose M here: the
- module will be called suunto.
-
config USB_SERIAL_DEBUG
tristate "USB Debugging Device"
help
obj-$(CONFIG_USB_SERIAL_EMPEG) += empeg.o
obj-$(CONFIG_USB_SERIAL_F81232) += f81232.o
obj-$(CONFIG_USB_SERIAL_FTDI_SIO) += ftdi_sio.o
-obj-$(CONFIG_USB_SERIAL_FUNSOFT) += funsoft.o
obj-$(CONFIG_USB_SERIAL_GARMIN) += garmin_gps.o
-obj-$(CONFIG_USB_SERIAL_HP4X) += hp4x.o
obj-$(CONFIG_USB_SERIAL_IPAQ) += ipaq.o
obj-$(CONFIG_USB_SERIAL_IPW) += ipw.o
obj-$(CONFIG_USB_SERIAL_IR) += ir-usb.o
obj-$(CONFIG_USB_SERIAL_METRO) += metro-usb.o
obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o
obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o
-obj-$(CONFIG_USB_SERIAL_MOTOROLA) += moto_modem.o
obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o
obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o
obj-$(CONFIG_USB_SERIAL_QT2) += quatech2.o
obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o
-obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o
obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o
+obj-$(CONFIG_USB_SERIAL_SIMPLE) += usb-serial-simple.o
obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o
obj-$(CONFIG_USB_SERIAL_SSU100) += ssu100.o
-obj-$(CONFIG_USB_SERIAL_SUUNTO) += suunto.o
obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o
obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o
obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o
obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o
obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o
-obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o
obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o
-obj-$(CONFIG_USB_SERIAL_ZIO) += zio.o
obj-$(CONFIG_USB_SERIAL_ZTE) += zte_ev.o
-obj-$(CONFIG_USB_SERIAL_FLASHLOADER) += flashloader.o
+++ /dev/null
-/*
- * Infineon Flashloader driver
- *
- * Copyright (C) 2013 Wei Shuai <cpuwolf@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-#include <linux/uaccess.h>
-
-static const struct usb_device_id id_table[] = {
- { USB_DEVICE(0x8087, 0x0716) },
- { },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static struct usb_serial_driver flashloader_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "flashloader",
- },
- .id_table = id_table,
- .num_ports = 1,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
- &flashloader_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, id_table);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Funsoft Serial USB driver
- *
- * Copyright (C) 2006 Greg Kroah-Hartman <gregkh@suse.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-#include <linux/uaccess.h>
-
-static const struct usb_device_id id_table[] = {
- { USB_DEVICE(0x1404, 0xcddc) },
- { },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static struct usb_serial_driver funsoft_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "funsoft",
- },
- .id_table = id_table,
- .num_ports = 1,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
- &funsoft_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, id_table);
-
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * HP4x Calculators Serial USB driver
- *
- * Copyright (C) 2005 Arthur Huillet (ahuillet@users.sf.net)
- * Copyright (C) 2001-2005 Greg Kroah-Hartman (greg@kroah.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * See Documentation/usb/usb-serial.txt for more information on using this
- * driver
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-#define DRIVER_DESC "HP4x (48/49) Generic Serial driver"
-
-#define HP_VENDOR_ID 0x03f0
-#define HP49GP_PRODUCT_ID 0x0121
-
-static const struct usb_device_id id_table[] = {
- { USB_DEVICE(HP_VENDOR_ID, HP49GP_PRODUCT_ID) },
- { } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static struct usb_serial_driver hp49gp_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "hp4X",
- },
- .id_table = id_table,
- .num_ports = 1,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
- &hp49gp_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, id_table);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Motorola USB Phone driver
- *
- * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * {sigh}
- * Motorola should be using the CDC ACM USB spec, but instead
- * they try to just "do their own thing"... This driver should handle a
- * few phones in which a basic "dumb serial connection" is needed to be
- * able to get a connection through to them.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-static const struct usb_device_id id_table[] = {
- { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */
- { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */
- { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */
- { USB_DEVICE(0x22b8, 0x2c84) }, /* Motorola VE240 phone */
- { USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */
- { },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static struct usb_serial_driver moto_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "moto-modem",
- },
- .id_table = id_table,
- .num_ports = 1,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
- &moto_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, id_table);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Siemens USB-MPI Serial USB driver
- *
- * Copyright (C) 2005 Thomas Hergenhahn <thomas.hergenhahn@suse.de>
- * Copyright (C) 2005,2008 Greg Kroah-Hartman <gregkh@suse.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-#define DRIVER_AUTHOR "Thomas Hergenhahn@web.de http://libnodave.sf.net"
-#define DRIVER_DESC "Driver for Siemens USB/MPI adapter"
-
-
-static const struct usb_device_id id_table[] = {
- /* Vendor and product id for 6ES7-972-0CB20-0XA0 */
- { USB_DEVICE(0x908, 0x0004) },
- { },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static struct usb_serial_driver siemens_usb_mpi_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "siemens_mpi",
- },
- .id_table = id_table,
- .num_ports = 1,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
- &siemens_usb_mpi_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, id_table);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Suunto ANT+ USB Driver
- *
- * Copyright (C) 2013 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- * Copyright (C) 2013 Linux Foundation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation only.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-#include <linux/uaccess.h>
-
-static const struct usb_device_id id_table[] = {
- { USB_DEVICE(0x0fcf, 0x1008) },
- { },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static struct usb_serial_driver suunto_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = KBUILD_MODNAME,
- },
- .id_table = id_table,
- .num_ports = 1,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
- &suunto_device,
- NULL,
-};
-
-module_usb_serial_driver(serial_drivers, id_table);
-MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * USB Serial "Simple" driver
+ *
+ * Copyright (C) 2001-2006,2008,2013 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2005 Arthur Huillet (ahuillet@users.sf.net)
+ * Copyright (C) 2005 Thomas Hergenhahn <thomas.hergenhahn@suse.de>
+ * Copyright (C) 2009 Outpost Embedded, LLC
+ * Copyright (C) 2010 Zilogic Systems <code@zilogic.com>
+ * Copyright (C) 2013 Wei Shuai <cpuwolf@gmail.com>
+ * Copyright (C) 2013 Linux Foundation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DEVICE(vendor, IDS) \
+static const struct usb_device_id vendor##_id_table[] = { \
+ IDS(), \
+ { }, \
+}; \
+static struct usb_serial_driver vendor##_device = { \
+ .driver = { \
+ .owner = THIS_MODULE, \
+ .name = "stringify(vendor)", \
+ }, \
+ .id_table = vendor##_id_table, \
+ .num_ports = 1, \
+};
+
+
+/* ZIO Motherboard USB driver */
+#define ZIO_IDS() \
+ { USB_DEVICE(0x1CBE, 0x0103) }
+DEVICE(zio, ZIO_IDS);
+
+/* Funsoft Serial USB driver */
+#define FUNSOFT_IDS() \
+ { USB_DEVICE(0x1404, 0xcddc) }
+DEVICE(funsoft, FUNSOFT_IDS);
+
+/* Infineon Flashloader driver */
+#define FLASHLOADER_IDS() \
+ { USB_DEVICE(0x8087, 0x0716) }
+DEVICE(flashloader, FLASHLOADER_IDS);
+
+/* ViVOpay USB Serial Driver */
+#define VIVOPAY_IDS() \
+ { USB_DEVICE(0x1d5f, 0x1004) } /* ViVOpay 8800 */
+DEVICE(vivopay, VIVOPAY_IDS);
+
+/* Motorola USB Phone driver */
+#define MOTO_IDS() \
+ { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ \
+ { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */ \
+ { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */ \
+ { USB_DEVICE(0x22b8, 0x2c84) }, /* Motorola VE240 phone */ \
+ { USB_DEVICE(0x22b8, 0x2c64) } /* Motorola V950 phone */
+DEVICE(moto_modem, MOTO_IDS);
+
+/* HP4x (48/49) Generic Serial driver */
+#define HP4X_IDS() \
+ { USB_DEVICE(0x03f0, 0x0121) }
+DEVICE(hp4x, HP4X_IDS);
+
+/* Suunto ANT+ USB Driver */
+#define SUUNTO_IDS() \
+ { USB_DEVICE(0x0fcf, 0x1008) }
+DEVICE(suunto, SUUNTO_IDS);
+
+/* Siemens USB/MPI adapter */
+#define SIEMENS_IDS() \
+ { USB_DEVICE(0x908, 0x0004) }
+DEVICE(siemens_mpi, SIEMENS_IDS);
+
+/* All of the above structures mushed into two lists */
+static struct usb_serial_driver * const serial_drivers[] = {
+ &zio_device,
+ &funsoft_device,
+ &flashloader_device,
+ &vivopay_device,
+ &moto_modem_device,
+ &hp4x_device,
+ &suunto_device,
+ &siemens_mpi_device,
+ NULL
+};
+
+static const struct usb_device_id id_table[] = {
+ ZIO_IDS(),
+ FUNSOFT_IDS(),
+ FLASHLOADER_IDS(),
+ VIVOPAY_IDS(),
+ MOTO_IDS(),
+ HP4X_IDS(),
+ SUUNTO_IDS(),
+ SIEMENS_IDS(),
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+module_usb_serial_driver(serial_drivers, id_table);
+MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Copyright (C) 2001-2005 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2009 Outpost Embedded, LLC
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-#define DRIVER_DESC "ViVOpay USB Serial Driver"
-
-#define VIVOPAY_VENDOR_ID 0x1d5f
-
-
-static struct usb_device_id id_table [] = {
- /* ViVOpay 8800 */
- { USB_DEVICE(VIVOPAY_VENDOR_ID, 0x1004) },
- { },
-};
-
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static struct usb_serial_driver vivopay_serial_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "vivopay-serial",
- },
- .id_table = id_table,
- .num_ports = 1,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
- &vivopay_serial_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, id_table);
-
-MODULE_AUTHOR("Forest Bond <forest.bond@outpostembedded.com>");
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * ZIO Motherboard USB driver
- *
- * Copyright (C) 2010 Zilogic Systems <code@zilogic.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-#include <linux/uaccess.h>
-
-static const struct usb_device_id id_table[] = {
- { USB_DEVICE(0x1CBE, 0x0103) },
- { },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static struct usb_serial_driver zio_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "zio",
- },
- .id_table = id_table,
- .num_ports = 1,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
- &zio_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, id_table);
-MODULE_LICENSE("GPL");
projects / ~andy / linux / commitdiff