+++ /dev/null
-#-------------------------------------------------------------------
-# Below is a modified sample configuration file for pam_mount that has
-# been successfully used to do encrypted auto mounts on a gentoo box
-# using both the same password as login and a sperate key file
-# and openssl. This works for cryptoloop and dm-crypt.
-#-------------------------------------------------------------------
-
-# Turn on if you want to debug why some volume cannot be mounted etc.
-# This can be overriden by user's local configuration
-#
-# Format: debug [ 1 | 0 ]
-# Local user configuration can override this.
-
-debug 1
-mkmountpoint 1
-# Loopback device to use to run fsck on loopback filesystems.
-fsckloop /dev/loop7
-
-# Users' local configuration file (if there is none, comment out this
-# parameter). Will be read as ~/<file>
-#
-# Note: you must include either options_allow or options_deny to use
-# this directive. I recommend also including options_require.
-#
-# Individual users may define additional volumes to mount if allowed
-# by pam_mount.conf (usually ~/.pam_mount.conf). The volume keyword is
-# the only valid keyword in these per-user configuration files. If the
-# luserconf parameter is set in pam_mount.conf, allowing user-defined
-# volume, then users may mount and unmount any volume they own at any
-# mount point they own. On some filesystem configurations this may be
-# a security flaw so user-defined volumes are not allowed by the example
-# pam_mount.conf distributed with pam_mount.
-#
-# Format: luserconf <file>
-# luserconf .pam_mount.conf
-
-# These directives determine which options may be specified in a user config
-# file (luserconf). You must include one of these directives if you have a
-# luserconf directive. You may not include both directives.
-#
-# If you have an options_allow directive, then the options listed in that
-# directive wil be allowed, and all others rejected. If you have an
-# options_deny directive, then the options listed will be denied, and all others
-# permitted.
-#
-# You may use the wildcard '*' to match all options.
-#
-options_allow nosuid,nodev,loop,encryption
-# options_deny suid,dev
-# options_allow *
-# options_deny *
-#
-# I recommend not permitting the suid and dev options.
-
-# The options listed in this directive are required for all volumes from a
-# user config file. That is, any volume specified in a user config file that
-# does not include these options will be ignored.
-#
-# Note: you must make sure that a required option is permitted (either by
-# including it in options_allow, or by not including it in options_deny).
-#
-# I recommend requiring at least nosuid and nodev.
-#
-# This is ignored completely if the volume is configured to get its options
-# and mount point from /etc/fstab.
-#
-options_require nosuid,nodev
-
-# Commands to mount/unmount volumes. They can take parameters, as shown.
-#
-# If you change the -p0 argument for lclmount, you'll need to modify the
-# source in mount.c (it sends the password to the stdin file descriptor
-# of the child process -- look for STDIN_FILENO).
-
-lsof /usr/sbin/lsof %(MNTPT)
-fsck /sbin/fsck -p %(FSCKTARGET)
-losetup /sbin/losetup -p0 "%(before=\"-e \" CIPHER)" "%(before=\"-k \" KEYBITS)" %(FSCKLOOP) %(VOLUME)
-unlosetup /sbin/losetup -d %(FSCKLOOP)
-cifsmount /bin/mount -t cifs //%(SERVER)/%(VOLUME) %(MNTPT) -o "username=%(USER)%(before=\",\" OPTIONS)"
-smbmount /bin/mount -t smbfs //%(SERVER)/%(VOLUME) %(MNTPT) -o "username=%(USER)%(before=\",\" OPTIONS)"
-ncpmount /bin/mount -t ncpfs %(SERVER)/%(USER) %(MNTPT) -o "pass-fd=0,volume=%(VOLUME)%(before=\",\" OPTIONS)"
-# Linux supports lazy unmounting (-l). May be dangerous for encrypted volumes.
-# May also break loopback mounts because loopback devices are not freed.
-# Need to unmount mount point not volume to support SMB mounts, etc.
-umount /bin/umount %(MNTPT)
-# On OpenBSD try "/usr/local/bin/mount_ehd" (included in pam_mount package).
-lclmount /bin/mount -p0 %(VOLUME) %(MNTPT) "%(before=\"-o \" OPTIONS)"
-cryptmount /bin/mount -t crypt "%(before=\"-o \" OPTIONS)" %(VOLUME) %(MNTPT)
-nfsmount /bin/mount %(SERVER):%(VOLUME) "%(MNTPT)%(before=\"-o \" OPTIONS)"
-# --bind may be a Linuxism. FIXME: find BSD equivalent.
-mntagain /bin/mount --bind %(PREVMNTPT) %(MNTPT)
-mntcheck /bin/mount # For BSD's (don't have /etc/mtab)
-pmvarrun /usr/sbin/pmvarrun -u %(USER) -d -o %(OPERATION)
-
-# Volumes that will be mounted when user triggers pam_mount module
-# (usually at login).
-#
-# Format:
-# volume <user> [smb|ncp|nfs|local] <server> <volume> <mount point> <mount options> <fs key cipher> <fs key path>
-#
-# General examples:
-# volume user smb krueger public /home/user/krueger - - -
-# volume user ncp krueger public /home/user/krueger user=user.context - -
-
-# Linux encrypted home directory examples, using dm_crypt:
-# volume user crypt - /dev/sda2 /home/user cipher=aes aes-256-ecb /home/user.key
-#
-# Linux encrypted home directory examples, using cryptoloop:
-# volume user local - /dev/hda123 /home/user loop,encryption=aes - -
-# volume user local - /home/user.img /home/user loop,user,exec,encryption=aes,keybits=256 - -
-# volume user local - /home/user.img - - - -
-# volume user local - /home/user.img - - aes-256-ecb /home/user4.key
-
-# BEGIN GENTOO EXAMPLES FOR ENCRYPTED HOME
-# user1 has an encrypted home that uses his/her system passwd as the
-# encryption key
-# To create a USB dongle secured user see user2:
-# Define a user key and group key to use a USB dongle as an encrypted
-# file system for the key to the user2 file system - so user would need
-# the USB dongle, the password for user key and the password for user
-# user2. in order to access the encrypted home of user2. Note that
-# without the first two the user can still log in and create files
-# on his home directory mount point. However the security for the
-# encrypted volume is much better since a dictionary attack would need
-# the dongle. See http://www.counterpane.com/twofish-final.html
-# for a discussion on why twofish is a good choice. This setup works
-# with mm-sources-2.6.0_beta9-r5. So to login graphically as user2
-# insert key, ctrl-alt-f1 login as key, alt-f7, login as user2,
-# ctrl-alt-f1, logout key, remove dongle. This works for KDM. Modify
-# /etc/pam.d/login and /etc/pam.d/kde per docs
-#volume key local - /dev/sda2 /key loop,encryption=twofish - -
-#volume user1 local - /home/.user1 /home/user1 loop,encryption=twofish - -
-#volume user2 local - /home/.user2 - - bf-ecb /key/sp.key
-# /etc/fstab contains
-#/home/.user2 /home/user2 reiserfs user,loop,encryption=twofish,noauto 0 0
-#/dev/sda2 /key ext2 user,loop,encryption=twofish,noauto 0 0
-#
-# Device-Mapper based encryption (dm-crypt)
-# Since the introduction of dm-crypt in Linux 2.6.4, cryptoloop has been
-# deprecated. To use the new dm-crypt interface, you will have to adapt
-# the preceding examples to use "crypt" instead of "local" as filesystem
-# type. Additionally the cipher algorithm is specified via the "cipher"
-# option (to distinguish from cryptoloop's "encryption"). Thus, the
-# user1 example would look like this:
-#volume user1 crypt - /home/.user1 /home/user1 loop,cipher=twofish - -
-# An entry in /etc/fstab is not needed. A detailed HOWTO can be found in
-# the forums: http://forums.gentoo.org/viewtopic.php?t=274651
-# END GENTOO EXAMPLES
-
-#
-# OpenBSD encrypted home directory example (see also lclmount above):
-# volume user local - /home/user.img /home/user svnd0 - -
-#
-# The last two examples need a line like the following in
-# /etc/fstab:
-#
-# /home/user4.img /home/user4 xfs user,loop,encryption=aes,keybits=256,noauto 0 0
-#
-# Details:
-# Local user configuration can extend this.
-# Mount point must be owned by the user.
-#
-# If there are no servers, mount options, fs key ciphers, etc. you must
-# supply a "-"
-#
-# If a local mount is specified in a user config file, then the user must
-# own the device or file being mounted.
-#
-# See http://www.tldp.org/HOWTO/Loopback-Encrypted-Filesystem-HOWTO.html
-# to learn how to create a encrypted loopback filesystem.
-#
-# If the volume's password is different than the user's login password,
-# the following technique may be used (see also README):
-#
-# 1. Create a file containing the volume's password (FS key). If you are
-# using pam_mount to mount an loopback encrypted volume, this password
-# should may generated by /dev/urandom.
-#
-# Simple example:
-# echo <volume password> | openssl aes-256-ecb > /home/user.key
-# Encrypt this file using the user's login password as the key.
-#
-# Verbose loopback encrypted volume example:
-# a. dd if=/dev/urandom of=/home/user.img bs=1M count=<image size in MB>
-# b. dd if=/dev/urandom bs=1c count=<keysize / 8> | openssl enc \
-# -<fs key cipher> > /home/user.key
-# Encrypt this file using the user's login password as the key.
-# c. openssl enc -d -<fs key cipher> -in /home/user.key | losetup -e aes \
-# -k <keysize> -p0 /dev/loop0 /home/user.img
-# d. mkfs -t ext2 /dev/loop0
-# e. umount /dev/loop0
-# f. losetup -d /dev/loop0
-#
-# 3. In pam_mount.conf:
-# a. Set the fs key cipher variable to the cipher used (ie: aes-256-ecb).
-# b. Set the fs key path variable to the key's path (ie: /home/user.key)
-# 4. If a user changes his login password, regenerate the efsk that
-# was created in step 1b. A script named passwdehd is provided to do this.
-#
-# If fs_key_cipher is -, then the user's login password is also the volume's
-# password.
-
-# Template (or wildcard) volumes
-#
-# If user is "*", "&" will be replaced by name of the user logging on in the
-# volume, mount point, mount options and fs key path fields. "~/*" will be
-# replaced with "<user's homedir>/*." In this mode, the user need not
-# own the mount point, but it must exist.
-#
-# volume * smb krueger & /home/& uid=&,gid=&,dmask=0750 - -
-# volume * smb krueger homes /home/&/remote - - -
-# volume * local - /home/&.img - - aes-256-ecb /etc/ehd/&
-
-# Windows 2000, which requires a domain specified, example (thanks John Knox):
-# volume * smb viper & /home/& uid=&,gid=&,dmask=0750,workgroup=WINDOWS_DOMAIN - -
projects / ~andy / sunrise / commitdiff