This patch updates the PHY initialization code for bcm43xx-softmac
to conform with recent changes in the clean-room specs at
http://bcm-specs.sipsolutions.net. Mostly, these changes implement
the sequence needed for chips with GPHY revision 8; however, the
patch also corrects a typo in one address, and some parts that were
missing from the spec when the initial coding was done.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
if (phy->rev <= 2)
for (i = 0; i < BCM43xx_ILT_NOISESCALEG_SIZE; i++)
bcm43xx_ilt_write(bcm, 0x1400 + i, bcm43xx_ilt_noisescaleg1[i]);
if (phy->rev <= 2)
for (i = 0; i < BCM43xx_ILT_NOISESCALEG_SIZE; i++)
bcm43xx_ilt_write(bcm, 0x1400 + i, bcm43xx_ilt_noisescaleg1[i]);
- else if ((phy->rev == 7) && (bcm43xx_phy_read(bcm, 0x0449) & 0x0200))
+ else if ((phy->rev >= 7) && (bcm43xx_phy_read(bcm, 0x0449) & 0x0200))
for (i = 0; i < BCM43xx_ILT_NOISESCALEG_SIZE; i++)
bcm43xx_ilt_write(bcm, 0x1400 + i, bcm43xx_ilt_noisescaleg3[i]);
else
for (i = 0; i < BCM43xx_ILT_NOISESCALEG_SIZE; i++)
bcm43xx_ilt_write(bcm, 0x1400 + i, bcm43xx_ilt_noisescaleg3[i]);
else
if (phy->rev == 2)
for (i = 0; i < BCM43xx_ILT_SIGMASQR_SIZE; i++)
bcm43xx_ilt_write(bcm, 0x5000 + i, bcm43xx_ilt_sigmasqr1[i]);
if (phy->rev == 2)
for (i = 0; i < BCM43xx_ILT_SIGMASQR_SIZE; i++)
bcm43xx_ilt_write(bcm, 0x5000 + i, bcm43xx_ilt_sigmasqr1[i]);
- else if ((phy->rev > 2) && (phy->rev <= 7))
+ else if ((phy->rev > 2) && (phy->rev <= 8))
for (i = 0; i < BCM43xx_ILT_SIGMASQR_SIZE; i++)
bcm43xx_ilt_write(bcm, 0x5000 + i, bcm43xx_ilt_sigmasqr2[i]);
for (i = 0; i < BCM43xx_ILT_SIGMASQR_SIZE; i++)
bcm43xx_ilt_write(bcm, 0x5000 + i, bcm43xx_ilt_sigmasqr2[i]);
if (phy->rev == 1)
bcm43xx_phy_initb5(bcm);
if (phy->rev == 1)
bcm43xx_phy_initb5(bcm);
- else if (phy->rev >= 2 && phy->rev <= 7)
bcm43xx_phy_initb6(bcm);
if (phy->rev >= 2 || phy->connected)
bcm43xx_phy_inita(bcm);
bcm43xx_phy_initb6(bcm);
if (phy->rev >= 2 || phy->connected)
bcm43xx_phy_inita(bcm);
bcm43xx_phy_lo_g_measure(bcm);
} else {
if (radio->version == 0x2050 && radio->revision == 8) {
bcm43xx_phy_lo_g_measure(bcm);
} else {
if (radio->version == 0x2050 && radio->revision == 8) {
+ bcm43xx_radio_write16(bcm, 0x0052,
+ (radio->txctl1 << 4) | radio->txctl2);
} else {
bcm43xx_radio_write16(bcm, 0x0052,
(bcm43xx_radio_read16(bcm, 0x0052)
& 0xFFF0) | radio->txctl1);
}
if (phy->rev >= 6) {
} else {
bcm43xx_radio_write16(bcm, 0x0052,
(bcm43xx_radio_read16(bcm, 0x0052)
& 0xFFF0) | radio->txctl1);
}
if (phy->rev >= 6) {
bcm43xx_phy_write(bcm, 0x0036,
(bcm43xx_phy_read(bcm, 0x0036)
bcm43xx_phy_write(bcm, 0x0036,
(bcm43xx_phy_read(bcm, 0x0036)
- & 0xF000) | (FIXME << 12));
- */
+ & 0xF000) | (radio->txctl2 << 12));
}
if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL)
bcm43xx_phy_write(bcm, 0x002E, 0x8075);
else
}
if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL)
bcm43xx_phy_write(bcm, 0x002E, 0x8075);
else
- bcm43xx_phy_write(bcm, 0x003E, 0x807F);
+ bcm43xx_phy_write(bcm, 0x002E, 0x807F);
if (phy->rev < 2)
bcm43xx_phy_write(bcm, 0x002F, 0x0101);
else
if (phy->rev < 2)
bcm43xx_phy_write(bcm, 0x002F, 0x0101);
else