]> Pileus Git - ~andy/linux/commit
ARM: Kirkwood: DT board setup for CloudBox
authorSimon Guinot <simon.guinot@sequanux.org>
Mon, 8 Apr 2013 22:41:28 +0000 (00:41 +0200)
committerJason Cooper <jason@lakedaemon.net>
Wed, 10 Apr 2013 18:16:06 +0000 (18:16 +0000)
commit98d4f2acb91ac4a839eab6b92f02f57986af2197
tree1e37a11881d96c169b4c2b70cb129b18527d2069
parenta557dd1a08dfb5baff4eb1704ed22fd839205057
ARM: Kirkwood: DT board setup for CloudBox

This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox
is a low cost NAS based on the Network Space v2.

Chipset list:
- CPU MARVELL 88F6702 1Ghz
- SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz
- 1 Ethernet Gigabit port (PHY MARVELL 88E1318)
- SPI flash, NOR 512KB
- 1 push button
- 2 LEDs (red and blue)

There is no EEPROM and no USB ports embedded.

Note that this board must not be confused with the Network Space Mini v2
which is embedded in a previous LaCie product also named CloudBox.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/kirkwood-cloudbox.dts [new file with mode: 0644]
arch/arm/configs/kirkwood_defconfig
arch/arm/mach-kirkwood/Kconfig
arch/arm/mach-kirkwood/Makefile
arch/arm/mach-kirkwood/board-dt.c
arch/arm/mach-kirkwood/board-ns2.c
arch/arm/mach-kirkwood/common.h