X-Git-Url: http://pileus.org/git/?a=blobdiff_plain;f=include%2Flinux%2Fmroute6.h;h=66982e7640514389098c140a39665f95261071d8;hb=bbb923a4c2d17ebd5ec34755fe19a33914cbd86f;hp=6d8c7251eb8d4147968c6a146473868caa0eebbc;hpb=21e98932dcf15fe7eabd09a35f2020e0dd86b685;p=~andy%2Flinux

diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 6d8c7251eb8..66982e76405 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -1,128 +1,16 @@
 #ifndef __LINUX_MROUTE6_H
 #define __LINUX_MROUTE6_H
 
-#include <linux/types.h>
-#include <linux/sockios.h>
-
-/*
- *	Based on the MROUTING 3.5 defines primarily to keep
- *	source compatibility with BSD.
- *
- *	See the pim6sd code for the original history.
- *
- *      Protocol Independent Multicast (PIM) data structures included
- *      Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT6_BASE	200
-#define MRT6_INIT	(MRT6_BASE)	/* Activate the kernel mroute code 	*/
-#define MRT6_DONE	(MRT6_BASE+1)	/* Shutdown the kernel mroute		*/
-#define MRT6_ADD_MIF	(MRT6_BASE+2)	/* Add a virtual interface		*/
-#define MRT6_DEL_MIF	(MRT6_BASE+3)	/* Delete a virtual interface		*/
-#define MRT6_ADD_MFC	(MRT6_BASE+4)	/* Add a multicast forwarding entry	*/
-#define MRT6_DEL_MFC	(MRT6_BASE+5)	/* Delete a multicast forwarding entry	*/
-#define MRT6_VERSION	(MRT6_BASE+6)	/* Get the kernel multicast version	*/
-#define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/
-#define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/
-#define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/
-
-#define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */
-#define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
-
-#define MAXMIFS		32
-typedef unsigned long mifbitmap_t;	/* User mode code depends on this lot */
-typedef unsigned short mifi_t;
-#define ALL_MIFS	((mifi_t)(-1))
-
-#ifndef IF_SETSIZE
-#define IF_SETSIZE	256
-#endif
-
-typedef	__u32		if_mask;
-#define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */
-
-#if !defined(__KERNEL__)
-#if !defined(DIV_ROUND_UP)
-#define	DIV_ROUND_UP(x,y)	(((x) + ((y) - 1)) / (y))
-#endif
-#endif
-
-typedef struct if_set {
-	if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
-} if_set;
-
-#define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
-#define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
-#define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
-#define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f)))
-#define IF_ZERO(p)      bzero(p, sizeof(*(p)))
-
-/*
- *	Passed by mrouted for an MRT_ADD_MIF - again we use the
- *	mrouted 3.6 structures for compatibility
- */
-
-struct mif6ctl {
-	mifi_t	mif6c_mifi;		/* Index of MIF */
-	unsigned char mif6c_flags;	/* MIFF_ flags */
-	unsigned char vifc_threshold;	/* ttl limit */
-	__u16	 mif6c_pifi;		/* the index of the physical IF */
-	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
-};
-
-#define MIFF_REGISTER	0x1	/* register vif	*/
-
-/*
- *	Cache manipulation structures for mrouted and PIMd
- */
-
-struct mf6cctl {
-	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
-	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
-	mifi_t	mf6cc_parent;			/* Where it arrived	*/
-	struct if_set mf6cc_ifset;		/* Where it is going */
-};
-
-/*
- *	Group count retrieval for pim6sd
- */
-
-struct sioc_sg_req6 {
-	struct sockaddr_in6 src;
-	struct sockaddr_in6 grp;
-	unsigned long pktcnt;
-	unsigned long bytecnt;
-	unsigned long wrong_if;
-};
-
-/*
- *	To get vif packet counts
- */
-
-struct sioc_mif_req6 {
-	mifi_t	mifi;		/* Which iface */
-	unsigned long icount;	/* In packets */
-	unsigned long ocount;	/* Out packets */
-	unsigned long ibytes;	/* In bytes */
-	unsigned long obytes;	/* Out bytes */
-};
-
-/*
- *	That's all usermode folks
- */
-
-#ifdef __KERNEL__
 
 #include <linux/pim.h>
 #include <linux/skbuff.h>	/* for struct sk_buff_head */
 #include <net/net_namespace.h>
+#include <uapi/linux/mroute6.h>
 
 #ifdef CONFIG_IPV6_MROUTE
 static inline int ip6_mroute_opt(int opt)
 {
-	return (opt >= MRT6_BASE) && (opt <= MRT6_BASE + 10);
+	return (opt >= MRT6_BASE) && (opt <= MRT6_MAX);
 }
 #else
 static inline int ip6_mroute_opt(int opt)
@@ -225,9 +113,6 @@ struct mfc6_cache {
 
 #define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
 
-#endif
-
-#ifdef __KERNEL__
 struct rtmsg;
 extern int ip6mr_get_route(struct net *net, struct sk_buff *skb,
 			   struct rtmsg *rtm, int nowait);
@@ -246,24 +131,3 @@ static inline int ip6mr_sk_done(struct sock *sk)
 }
 #endif
 #endif
-
-/*
- * Structure used to communicate from kernel to multicast router.
- * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
- * used for IPv4 implementation). This is because this structure will be passed via an
- * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
- * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
- */
-
-struct mrt6msg {
-#define MRT6MSG_NOCACHE		1
-#define MRT6MSG_WRONGMIF	2
-#define MRT6MSG_WHOLEPKT	3		/* used for use level encap */
-	__u8		im6_mbz;		/* must be zero		   */
-	__u8		im6_msgtype;		/* what type of message    */
-	__u16		im6_mif;		/* mif rec'd on		   */
-	__u32		im6_pad;		/* padding for 64 bit arch */
-	struct in6_addr	im6_src, im6_dst;
-};
-
-#endif