X-Git-Url: http://pileus.org/git/?a=blobdiff_plain;f=drivers%2Fide%2FKconfig;h=eed6d8e1b5c7abfbff3d693bc072bb3040ea3e1e;hb=1c10e93828f8861c3f58d647e259de0e2c63b930;hp=ab8fb257528ed51cb4e9bac0abb0710ce7543fbb;hpb=b5eb9513f7c1bee862ada22bf1489f53752686bd;p=~andy%2Flinux diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index ab8fb257528..eed6d8e1b5c 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -4,10 +4,14 @@ # Andre Hedrick # +# Select HAVE_IDE if IDE is supported +config HAVE_IDE + def_bool n + menuconfig IDE tristate "ATA/ATAPI/MFM/RLL support" + depends on HAVE_IDE depends on BLOCK - depends on HAS_IOMEM ---help--- If you say Y here, your kernel will be able to manage low cost mass storage units such as ATA/(E)IDE and ATAPI units. The most common @@ -46,7 +50,7 @@ menuconfig IDE To compile this driver as a module, choose M here: the module will be called ide. - For further information, please read . + For further information, please read . If unsure, say Y. @@ -73,7 +77,7 @@ config BLK_DEV_IDE Useful information about large (>540 MB) IDE disks, multiple interfaces, what to do if ATA/IDE devices are not automatically detected, sound card ATA/IDE ports, module support, and other - topics, is contained in . For detailed + topics, is contained in . For detailed information about hard drives, consult the Disk-HOWTO and the Multi-Disk-HOWTO, available from . @@ -83,7 +87,7 @@ config BLK_DEV_IDE . To compile this driver as a module, choose M here and read - . The module will be called ide-mod. + . The module will be called ide-mod. Do not compile this driver as a module if your root file system (the one containing the directory /) is located on an IDE device. @@ -94,7 +98,7 @@ config BLK_DEV_IDE if BLK_DEV_IDE -comment "Please see Documentation/ide.txt for help/info on IDE drives" +comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" config BLK_DEV_IDE_SATA bool "Support for SATA (deprecated; conflicts with libata SATA driver)" @@ -231,8 +235,8 @@ config BLK_DEV_IDETAPE along with other IDE devices, as "hdb" or "hdc", or something similar, and will be mapped to a character device such as "ht0" (check the boot messages with dmesg). Be sure to consult the - and files - for usage information. + and + files for usage information. To compile this driver as a module, choose M here: the module will be called ide-tape. @@ -354,7 +358,7 @@ config BLK_DEV_CMD640 The CMD640 chip is also used on add-in cards by Acculogic, and on the "CSA-6400E PCI to IDE controller" that some people have. For - details, read . + details, read . config BLK_DEV_CMD640_ENHANCED bool "CMD640 enhanced support" @@ -362,7 +366,7 @@ config BLK_DEV_CMD640_ENHANCED help This option includes support for setting/autotuning PIO modes and prefetch on CMD640 IDE interfaces. For details, read - . If you have a CMD640 IDE interface + . If you have a CMD640 IDE interface and your BIOS does not already do this for you, then say Y here. Otherwise say N. @@ -374,6 +378,9 @@ config BLK_DEV_IDEPNP would like the kernel to automatically detect and activate it, say Y here. +config BLK_DEV_IDEDMA_SFF + bool + if PCI comment "PCI IDE chipsets support" @@ -455,6 +462,7 @@ config BLK_DEV_RZ1000 config BLK_DEV_IDEDMA_PCI bool select BLK_DEV_IDEPCI + select BLK_DEV_IDEDMA_SFF config BLK_DEV_AEC62XX tristate "AEC62XX chipset support" @@ -684,23 +692,6 @@ config BLK_DEV_PDC202XX_OLD If unsure, say N. -config PDC202XX_BURST - bool "Special UDMA Feature" - depends on BLK_DEV_PDC202XX_OLD - help - This option causes the pdc202xx driver to enable UDMA modes on the - PDC202xx even when the PDC202xx BIOS has not done so. - - It was originally designed for the PDC20246/Ultra33, whose BIOS will - only setup UDMA on the first two PDC20246 cards. It has also been - used successfully on a PDC20265/Ultra100, allowing use of UDMA modes - when the PDC20265 BIOS has been disabled (for faster boot up). - - Please read the comments at the top of - . - - If unsure, say N. - config BLK_DEV_PDC202XX_NEW tristate "PROMISE PDC202{68|69|70|71|75|76|77} support" select BLK_DEV_IDEDMA_PCI @@ -1012,7 +1003,7 @@ config BLK_DEV_Q40IDE config BLK_DEV_PALMCHIP_BK3710 tristate "Palmchip bk3710 IDE controller support" depends on ARCH_DAVINCI - select BLK_DEV_IDEDMA_PCI + select BLK_DEV_IDEDMA_SFF help Say Y here if you want to support the onchip IDE controller on the TI DaVinci SoC @@ -1078,9 +1069,9 @@ config BLK_DEV_ALI14XX This driver is enabled at runtime using the "ali14xx.probe" kernel boot parameter. It enables support for the secondary IDE interface of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster - I/O speeds to be set as well. See the files - and - for more info. + I/O speeds to be set as well. + See the files and + for more info. config BLK_DEV_DTC2278 tristate "DTC-2278 support" @@ -1088,7 +1079,7 @@ config BLK_DEV_DTC2278 This driver is enabled at runtime using the "dtc2278.probe" kernel boot parameter. It enables support for the secondary IDE interface of the DTC-2278 card, and permits faster I/O speeds to be set as - well. See the and + well. See the and files for more info. config BLK_DEV_HT6560B @@ -1097,7 +1088,7 @@ config BLK_DEV_HT6560B This driver is enabled at runtime using the "ht6560b.probe" kernel boot parameter. It enables support for the secondary IDE interface of the Holtek card, and permits faster I/O speeds to be set as well. - See the and + See the and files for more info. config BLK_DEV_QD65XX @@ -1105,7 +1096,7 @@ config BLK_DEV_QD65XX help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the - and + and for more info. config BLK_DEV_UMC8672 @@ -1114,13 +1105,14 @@ config BLK_DEV_UMC8672 This driver is enabled at runtime using the "umc8672.probe" kernel boot parameter. It enables support for the secondary IDE interface of the UMC-8672, and permits faster I/O speeds to be set as well. - See the files and + See the files and for more info. endif config BLK_DEV_IDEDMA - def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \ + BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA config IDE_ARCH_OBSOLETE_INIT def_bool ALPHA || (ARM && !ARCH_L7200) || BLACKFIN || X86 || IA64 || M32R || MIPS || PARISC || PPC || (SUPERH64 && BLK_DEV_IDEPCI) || SPARC