X-Git-Url: http://pileus.org/git/?a=blobdiff_plain;f=drivers%2Fhwmon%2FKconfig;h=19b0af40c7aa333b1c61b14ed97ea896ed6eb648;hb=a3eeb453539d7ad9c0d8cced1e0883a6a8ed18f3;hp=773e484f16466482ed6a499005b27485c6854400;hpb=52fc43f7c1c416b114e88ff39635c36e67ef15b6;p=~andy%2Flinux

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 773e484f164..19b0af40c7a 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -238,13 +238,13 @@ config SENSORS_K8TEMP
 	  will be called k8temp.
 
 config SENSORS_K10TEMP
-	tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+	tristate "AMD Family 10h/11h/12h/14h temperature sensor"
 	depends on X86 && PCI
 	help
 	  If you say yes here you get support for the temperature
 	  sensor(s) inside your CPU. Supported are later revisions of
-	  the AMD Family 10h and all revisions of the AMD Family 11h
-	  microarchitectures.
+	  the AMD Family 10h and all revisions of the AMD Family 11h,
+	  12h (Llano), and 14h (Brazos) microarchitectures.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called k10temp.
@@ -455,17 +455,29 @@ config SENSORS_JZ4740
 	  called jz4740-hwmon.
 
 config SENSORS_JC42
-	tristate "JEDEC JC42.4 compliant temperature sensors"
+	tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 	depends on I2C
 	help
-	  If you say yes here you get support for Jedec JC42.4 compliant
-	  temperature sensors. Support will include, but not be limited to,
-	  ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
-	  MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
+	  If you say yes here, you get support for JEDEC JC42.4 compliant
+	  temperature sensors, which are used on many DDR3 memory modules for
+	  mobile devices and servers.  Support will include, but not be limited
+	  to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
+	  MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called jc42.
 
+config SENSORS_LINEAGE
+	tristate "Lineage Compact Power Line Power Entry Module"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Lineage Compact Power Line
+	  series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
+	  CP2000DC, CP2725, and others.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lineage-pem.
+
 config SENSORS_LM63
 	tristate "National Semiconductor LM63 and LM64"
 	depends on I2C
@@ -574,7 +586,7 @@ config SENSORS_LM85
 	help
 	  If you say yes here you get support for National Semiconductor LM85
 	  sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
-	  EMC6D101 and EMC6D102.
+	  EMC6D101, EMC6D102, and EMC6D103.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm85.
@@ -684,6 +696,16 @@ config SENSORS_MAX1619
 	  This driver can also be built as a module.  If so, the module
 	  will be called max1619.
 
+config SENSORS_MAX6639
+	tristate "Maxim MAX6639 sensor chip"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the MAX6639
+	  sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called max6639.
+
 config SENSORS_MAX6650
 	tristate "Maxim MAX6650 sensor chip"
 	depends on I2C && EXPERIMENTAL
@@ -734,6 +756,61 @@ config SENSORS_PCF8591
 	  These devices are hard to detect and rarely found on mainstream
 	  hardware.  If unsure, say N.
 
+config PMBUS
+	tristate "PMBus support"
+	depends on I2C && EXPERIMENTAL
+	default n
+	help
+	  Say yes here if you want to enable PMBus support.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pmbus_core.
+
+if PMBUS
+
+config SENSORS_PMBUS
+	tristate "Generic PMBus devices"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for generic
+	  PMBus devices, including but not limited to BMR450, BMR451, BMR453,
+	  BMR454, and LTC2978.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pmbus.
+
+config SENSORS_MAX16064
+	tristate "Maxim MAX16064"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX16064.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max16064.
+
+config SENSORS_MAX34440
+	tristate "Maxim MAX34440/MAX34441"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX34440 and MAX34441.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max34440.
+
+config SENSORS_MAX8688
+	tristate "Maxim MAX8688"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX8688.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max8688.
+
+endif # PMBUS
+
 config SENSORS_SHT15
 	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 	depends on GENERIC_GPIO