X-Git-Url: http://pileus.org/git/?a=blobdiff_plain;f=drivers%2Fgpu%2Fdrm%2Fi915%2Fintel_display.c;h=b41c87ac561f47c8517a1c8c9b4d251517a40380;hb=8febb2974faf0608111fd3c4dc36fa7f0f1cbfc2;hp=432fc04c6bffc1b58d8da1645a8a5687049a9bc2;hpb=8d49a77568d1105ff3e64aec484dac059f54824e;p=~andy%2Flinux

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 432fc04c6bf..b41c87ac561 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3771,8 +3771,11 @@ static bool g4x_compute_wm0(struct drm_device *dev,
 	int entries, tlb_miss;
 
 	crtc = intel_get_crtc_for_plane(dev, plane);
-	if (crtc->fb == NULL || !crtc->enabled)
+	if (crtc->fb == NULL || !crtc->enabled) {
+		*cursor_wm = cursor->guard_size;
+		*plane_wm = display->guard_size;
 		return false;
+	}
 
 	htotal = crtc->mode.htotal;
 	hdisplay = crtc->mode.hdisplay;
@@ -4513,11 +4516,404 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
 	return dev_priv->lvds_use_ssc && i915_panel_use_ssc;
 }
 
-static int intel_crtc_mode_set(struct drm_crtc *crtc,
-			       struct drm_display_mode *mode,
-			       struct drm_display_mode *adjusted_mode,
-			       int x, int y,
-			       struct drm_framebuffer *old_fb)
+static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
+			      struct drm_display_mode *mode,
+			      struct drm_display_mode *adjusted_mode,
+			      int x, int y,
+			      struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	u32 fp_reg, dpll_reg;
+	int refclk, num_connectors = 0;
+	intel_clock_t clock, reduced_clock;
+	u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
+	bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
+	bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+	const intel_limit_t *limit;
+	int ret;
+	u32 reg, temp;
+	u32 lvds_sync = 0;
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+		if (encoder->base.crtc != crtc)
+			continue;
+
+		switch (encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_SDVO:
+		case INTEL_OUTPUT_HDMI:
+			is_sdvo = true;
+			if (encoder->needs_tv_clock)
+				is_tv = true;
+			break;
+		case INTEL_OUTPUT_DVO:
+			is_dvo = true;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = true;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = true;
+			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			is_dp = true;
+			break;
+		}
+
+		num_connectors++;
+	}
+
+	if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
+		refclk = dev_priv->lvds_ssc_freq * 1000;
+		DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
+			      refclk / 1000);
+	} else if (!IS_GEN2(dev)) {
+		refclk = 96000;
+	} else {
+		refclk = 48000;
+	}
+
+	/*
+	 * Returns a set of divisors for the desired target clock with the given
+	 * refclk, or FALSE.  The returned values represent the clock equation:
+	 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+	 */
+	limit = intel_limit(crtc, refclk);
+	ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
+	if (!ok) {
+		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	/* Ensure that the cursor is valid for the new mode before changing... */
+	intel_crtc_update_cursor(crtc, true);
+
+	if (is_lvds && dev_priv->lvds_downclock_avail) {
+		has_reduced_clock = limit->find_pll(limit, crtc,
+						    dev_priv->lvds_downclock,
+						    refclk,
+						    &reduced_clock);
+		if (has_reduced_clock && (clock.p != reduced_clock.p)) {
+			/*
+			 * If the different P is found, it means that we can't
+			 * switch the display clock by using the FP0/FP1.
+			 * In such case we will disable the LVDS downclock
+			 * feature.
+			 */
+			DRM_DEBUG_KMS("Different P is found for "
+				      "LVDS clock/downclock\n");
+			has_reduced_clock = 0;
+		}
+	}
+	/* SDVO TV has fixed PLL values depend on its clock range,
+	   this mirrors vbios setting. */
+	if (is_sdvo && is_tv) {
+		if (adjusted_mode->clock >= 100000
+		    && adjusted_mode->clock < 140500) {
+			clock.p1 = 2;
+			clock.p2 = 10;
+			clock.n = 3;
+			clock.m1 = 16;
+			clock.m2 = 8;
+		} else if (adjusted_mode->clock >= 140500
+			   && adjusted_mode->clock <= 200000) {
+			clock.p1 = 1;
+			clock.p2 = 10;
+			clock.n = 6;
+			clock.m1 = 12;
+			clock.m2 = 8;
+		}
+	}
+
+	if (IS_PINEVIEW(dev)) {
+		fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
+		if (has_reduced_clock)
+			fp2 = (1 << reduced_clock.n) << 16 |
+				reduced_clock.m1 << 8 | reduced_clock.m2;
+	} else {
+		fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+		if (has_reduced_clock)
+			fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
+				reduced_clock.m2;
+	}
+
+	dpll = DPLL_VGA_MODE_DIS;
+
+	if (!IS_GEN2(dev)) {
+		if (is_lvds)
+			dpll |= DPLLB_MODE_LVDS;
+		else
+			dpll |= DPLLB_MODE_DAC_SERIAL;
+		if (is_sdvo) {
+			int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+			if (pixel_multiplier > 1) {
+				if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+					dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+			}
+			dpll |= DPLL_DVO_HIGH_SPEED;
+		}
+		if (is_dp)
+			dpll |= DPLL_DVO_HIGH_SPEED;
+
+		/* compute bitmask from p1 value */
+		if (IS_PINEVIEW(dev))
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
+		else {
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+			if (IS_G4X(dev) && has_reduced_clock)
+				dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+		}
+		switch (clock.p2) {
+		case 5:
+			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+			break;
+		case 7:
+			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+			break;
+		case 10:
+			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+			break;
+		case 14:
+			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+			break;
+		}
+		if (INTEL_INFO(dev)->gen >= 4)
+			dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+	} else {
+		if (is_lvds) {
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+		} else {
+			if (clock.p1 == 2)
+				dpll |= PLL_P1_DIVIDE_BY_TWO;
+			else
+				dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+			if (clock.p2 == 4)
+				dpll |= PLL_P2_DIVIDE_BY_4;
+		}
+	}
+
+	if (is_sdvo && is_tv)
+		dpll |= PLL_REF_INPUT_TVCLKINBC;
+	else if (is_tv)
+		/* XXX: just matching BIOS for now */
+		/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
+		dpll |= 3;
+	else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+	else
+		dpll |= PLL_REF_INPUT_DREFCLK;
+
+	/* setup pipeconf */
+	pipeconf = I915_READ(PIPECONF(pipe));
+
+	/* Set up the display plane register */
+	dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+	/* Ironlake's plane is forced to pipe, bit 24 is to
+	   enable color space conversion */
+	if (pipe == 0)
+		dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
+	else
+		dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+	if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
+		/* Enable pixel doubling when the dot clock is > 90% of the (display)
+		 * core speed.
+		 *
+		 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
+		 * pipe == 0 check?
+		 */
+		if (mode->clock >
+		    dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
+			pipeconf |= PIPECONF_DOUBLE_WIDE;
+		else
+			pipeconf &= ~PIPECONF_DOUBLE_WIDE;
+	}
+
+	dpll |= DPLL_VCO_ENABLE;
+
+	DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+	drm_mode_debug_printmodeline(mode);
+
+	fp_reg = FP0(pipe);
+	dpll_reg = DPLL(pipe);
+
+	I915_WRITE(fp_reg, fp);
+	I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
+
+	POSTING_READ(dpll_reg);
+	udelay(150);
+
+	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+	 * This is an exception to the general rule that mode_set doesn't turn
+	 * things on.
+	 */
+	if (is_lvds) {
+		reg = LVDS;
+
+		temp = I915_READ(reg);
+		temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+		if (pipe == 1) {
+			temp |= LVDS_PIPEB_SELECT;
+		} else {
+			temp &= ~LVDS_PIPEB_SELECT;
+		}
+		/* set the corresponsding LVDS_BORDER bit */
+		temp |= dev_priv->lvds_border_bits;
+		/* Set the B0-B3 data pairs corresponding to whether we're going to
+		 * set the DPLLs for dual-channel mode or not.
+		 */
+		if (clock.p2 == 7)
+			temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+		else
+			temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+		 * appropriately here, but we need to look more thoroughly into how
+		 * panels behave in the two modes.
+		 */
+		/* set the dithering flag on LVDS as needed */
+		if (INTEL_INFO(dev)->gen >= 4) {
+			if (dev_priv->lvds_dither)
+				temp |= LVDS_ENABLE_DITHER;
+			else
+				temp &= ~LVDS_ENABLE_DITHER;
+		}
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+			lvds_sync |= LVDS_HSYNC_POLARITY;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+			lvds_sync |= LVDS_VSYNC_POLARITY;
+		if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
+		    != lvds_sync) {
+			char flags[2] = "-+";
+			DRM_INFO("Changing LVDS panel from "
+				 "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
+				 flags[!(temp & LVDS_HSYNC_POLARITY)],
+				 flags[!(temp & LVDS_VSYNC_POLARITY)],
+				 flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
+				 flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
+			temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+			temp |= lvds_sync;
+		}
+		I915_WRITE(reg, temp);
+	}
+
+	if (is_dp) {
+		intel_dp_set_m_n(crtc, mode, adjusted_mode);
+	}
+
+	I915_WRITE(dpll_reg, dpll);
+
+	/* Wait for the clocks to stabilize. */
+	POSTING_READ(dpll_reg);
+	udelay(150);
+
+	if (INTEL_INFO(dev)->gen >= 4) {
+		temp = 0;
+		if (is_sdvo) {
+			temp = intel_mode_get_pixel_multiplier(adjusted_mode);
+			if (temp > 1)
+				temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+			else
+				temp = 0;
+		}
+		I915_WRITE(DPLL_MD(pipe), temp);
+	} else {
+		/* The pixel multiplier can only be updated once the
+		 * DPLL is enabled and the clocks are stable.
+		 *
+		 * So write it again.
+		 */
+		I915_WRITE(dpll_reg, dpll);
+	}
+
+	intel_crtc->lowfreq_avail = false;
+	if (is_lvds && has_reduced_clock && i915_powersave) {
+		I915_WRITE(fp_reg + 4, fp2);
+		intel_crtc->lowfreq_avail = true;
+		if (HAS_PIPE_CXSR(dev)) {
+			DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+			pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+		}
+	} else {
+		I915_WRITE(fp_reg + 4, fp);
+		if (HAS_PIPE_CXSR(dev)) {
+			DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+			pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+		}
+	}
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
+		/* the chip adds 2 halflines automatically */
+		adjusted_mode->crtc_vdisplay -= 1;
+		adjusted_mode->crtc_vtotal -= 1;
+		adjusted_mode->crtc_vblank_start -= 1;
+		adjusted_mode->crtc_vblank_end -= 1;
+		adjusted_mode->crtc_vsync_end -= 1;
+		adjusted_mode->crtc_vsync_start -= 1;
+	} else
+		pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */
+
+	I915_WRITE(HTOTAL(pipe),
+		   (adjusted_mode->crtc_hdisplay - 1) |
+		   ((adjusted_mode->crtc_htotal - 1) << 16));
+	I915_WRITE(HBLANK(pipe),
+		   (adjusted_mode->crtc_hblank_start - 1) |
+		   ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	I915_WRITE(HSYNC(pipe),
+		   (adjusted_mode->crtc_hsync_start - 1) |
+		   ((adjusted_mode->crtc_hsync_end - 1) << 16));
+
+	I915_WRITE(VTOTAL(pipe),
+		   (adjusted_mode->crtc_vdisplay - 1) |
+		   ((adjusted_mode->crtc_vtotal - 1) << 16));
+	I915_WRITE(VBLANK(pipe),
+		   (adjusted_mode->crtc_vblank_start - 1) |
+		   ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	I915_WRITE(VSYNC(pipe),
+		   (adjusted_mode->crtc_vsync_start - 1) |
+		   ((adjusted_mode->crtc_vsync_end - 1) << 16));
+
+	/* pipesrc and dspsize control the size that is scaled from,
+	 * which should always be the user's requested size.
+	 */
+	I915_WRITE(DSPSIZE(plane),
+		   ((mode->vdisplay - 1) << 16) |
+		   (mode->hdisplay - 1));
+	I915_WRITE(DSPPOS(plane), 0);
+	I915_WRITE(PIPESRC(pipe),
+		   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+
+	I915_WRITE(PIPECONF(pipe), pipeconf);
+	POSTING_READ(PIPECONF(pipe));
+	intel_enable_pipe(dev_priv, pipe, false);
+
+	intel_wait_for_vblank(dev, pipe);
+
+	I915_WRITE(DSPCNTR(plane), dspcntr);
+	POSTING_READ(DSPCNTR(plane));
+
+	ret = intel_pipe_set_base(crtc, x, y, old_fb);
+
+	intel_update_watermarks(dev);
+
+	return ret;
+}
+
+static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode,
+				  int x, int y,
+				  struct drm_framebuffer *old_fb)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4538,9 +4934,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	struct fdi_m_n m_n = {0};
 	u32 reg, temp;
 	u32 lvds_sync = 0;
-	int target_clock;
-
-	drm_vblank_pre_modeset(dev, pipe);
+	int target_clock, pixel_multiplier, lane, link_bw, bpp, factor;
 
 	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
 		if (encoder->base.crtc != crtc)
@@ -4582,8 +4976,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			      refclk / 1000);
 	} else if (!IS_GEN2(dev)) {
 		refclk = 96000;
-		if (HAS_PCH_SPLIT(dev) &&
-		    (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)))
+		if (!has_edp_encoder ||
+		    intel_encoder_is_pch_edp(&has_edp_encoder->base))
 			refclk = 120000; /* 120Mhz refclk */
 	} else {
 		refclk = 48000;
@@ -4598,7 +4992,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
 	if (!ok) {
 		DRM_ERROR("Couldn't find PLL settings for mode!\n");
-		drm_vblank_post_modeset(dev, pipe);
 		return -EINVAL;
 	}
 
@@ -4643,140 +5036,137 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	}
 
 	/* FDI link */
-	if (HAS_PCH_SPLIT(dev)) {
-		int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
-		int lane = 0, link_bw, bpp;
-		/* CPU eDP doesn't require FDI link, so just set DP M/N
-		   according to current link config */
-		if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+	pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+	lane = 0;
+	/* CPU eDP doesn't require FDI link, so just set DP M/N
+	   according to current link config */
+	if (has_edp_encoder &&
+	    !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		target_clock = mode->clock;
+		intel_edp_link_config(has_edp_encoder,
+				      &lane, &link_bw);
+	} else {
+		/* [e]DP over FDI requires target mode clock
+		   instead of link clock */
+		if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
 			target_clock = mode->clock;
-			intel_edp_link_config(has_edp_encoder,
-					      &lane, &link_bw);
-		} else {
-			/* [e]DP over FDI requires target mode clock
-			   instead of link clock */
-			if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
-				target_clock = mode->clock;
-			else
-				target_clock = adjusted_mode->clock;
-
-			/* FDI is a binary signal running at ~2.7GHz, encoding
-			 * each output octet as 10 bits. The actual frequency
-			 * is stored as a divider into a 100MHz clock, and the
-			 * mode pixel clock is stored in units of 1KHz.
-			 * Hence the bw of each lane in terms of the mode signal
-			 * is:
-			 */
-			link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
-		}
+		else
+			target_clock = adjusted_mode->clock;
+
+		/* FDI is a binary signal running at ~2.7GHz, encoding
+		 * each output octet as 10 bits. The actual frequency
+		 * is stored as a divider into a 100MHz clock, and the
+		 * mode pixel clock is stored in units of 1KHz.
+		 * Hence the bw of each lane in terms of the mode signal
+		 * is:
+		 */
+		link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+	}
 
-		/* determine panel color depth */
-		temp = I915_READ(PIPECONF(pipe));
-		temp &= ~PIPE_BPC_MASK;
-		if (is_lvds) {
-			/* the BPC will be 6 if it is 18-bit LVDS panel */
-			if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
-				temp |= PIPE_8BPC;
-			else
-				temp |= PIPE_6BPC;
-		} else if (has_edp_encoder) {
-			switch (dev_priv->edp.bpp/3) {
-			case 8:
-				temp |= PIPE_8BPC;
-				break;
-			case 10:
-				temp |= PIPE_10BPC;
-				break;
-			case 6:
-				temp |= PIPE_6BPC;
-				break;
-			case 12:
-				temp |= PIPE_12BPC;
-				break;
-			}
-		} else
+	/* determine panel color depth */
+	temp = I915_READ(PIPECONF(pipe));
+	temp &= ~PIPE_BPC_MASK;
+	if (is_lvds) {
+		/* the BPC will be 6 if it is 18-bit LVDS panel */
+		if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
+			temp |= PIPE_8BPC;
+		else
+			temp |= PIPE_6BPC;
+	} else if (has_edp_encoder) {
+		switch (dev_priv->edp.bpp/3) {
+		case 8:
 			temp |= PIPE_8BPC;
-		I915_WRITE(PIPECONF(pipe), temp);
-
-		switch (temp & PIPE_BPC_MASK) {
-		case PIPE_8BPC:
-			bpp = 24;
 			break;
-		case PIPE_10BPC:
-			bpp = 30;
+		case 10:
+			temp |= PIPE_10BPC;
 			break;
-		case PIPE_6BPC:
-			bpp = 18;
+		case 6:
+			temp |= PIPE_6BPC;
 			break;
-		case PIPE_12BPC:
-			bpp = 36;
+		case 12:
+			temp |= PIPE_12BPC;
 			break;
-		default:
-			DRM_ERROR("unknown pipe bpc value\n");
-			bpp = 24;
 		}
+	} else
+		temp |= PIPE_8BPC;
+	I915_WRITE(PIPECONF(pipe), temp);
+
+	switch (temp & PIPE_BPC_MASK) {
+	case PIPE_8BPC:
+		bpp = 24;
+		break;
+	case PIPE_10BPC:
+		bpp = 30;
+		break;
+	case PIPE_6BPC:
+		bpp = 18;
+		break;
+	case PIPE_12BPC:
+		bpp = 36;
+		break;
+	default:
+		DRM_ERROR("unknown pipe bpc value\n");
+		bpp = 24;
+	}
 
-		if (!lane) {
-			/* 
-			 * Account for spread spectrum to avoid
-			 * oversubscribing the link. Max center spread
-			 * is 2.5%; use 5% for safety's sake.
-			 */
-			u32 bps = target_clock * bpp * 21 / 20;
-			lane = bps / (link_bw * 8) + 1;
-		}
+	if (!lane) {
+		/*
+		 * Account for spread spectrum to avoid
+		 * oversubscribing the link. Max center spread
+		 * is 2.5%; use 5% for safety's sake.
+		 */
+		u32 bps = target_clock * bpp * 21 / 20;
+		lane = bps / (link_bw * 8) + 1;
+	}
 
-		intel_crtc->fdi_lanes = lane;
+	intel_crtc->fdi_lanes = lane;
 
-		if (pixel_multiplier > 1)
-			link_bw *= pixel_multiplier;
-		ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
-	}
+	if (pixel_multiplier > 1)
+		link_bw *= pixel_multiplier;
+	ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
 
 	/* Ironlake: try to setup display ref clock before DPLL
 	 * enabling. This is only under driver's control after
 	 * PCH B stepping, previous chipset stepping should be
 	 * ignoring this setting.
 	 */
-	if (HAS_PCH_SPLIT(dev)) {
-		temp = I915_READ(PCH_DREF_CONTROL);
-		/* Always enable nonspread source */
-		temp &= ~DREF_NONSPREAD_SOURCE_MASK;
-		temp |= DREF_NONSPREAD_SOURCE_ENABLE;
-		temp &= ~DREF_SSC_SOURCE_MASK;
-		temp |= DREF_SSC_SOURCE_ENABLE;
-		I915_WRITE(PCH_DREF_CONTROL, temp);
-
-		POSTING_READ(PCH_DREF_CONTROL);
-		udelay(200);
-
-		if (has_edp_encoder) {
-			if (intel_panel_use_ssc(dev_priv)) {
-				temp |= DREF_SSC1_ENABLE;
-				I915_WRITE(PCH_DREF_CONTROL, temp);
-
-				POSTING_READ(PCH_DREF_CONTROL);
-				udelay(200);
-			}
-			temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+	temp = I915_READ(PCH_DREF_CONTROL);
+	/* Always enable nonspread source */
+	temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+	temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+	temp &= ~DREF_SSC_SOURCE_MASK;
+	temp |= DREF_SSC_SOURCE_ENABLE;
+	I915_WRITE(PCH_DREF_CONTROL, temp);
+
+	POSTING_READ(PCH_DREF_CONTROL);
+	udelay(200);
 
-			/* Enable CPU source on CPU attached eDP */
-			if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
-				if (intel_panel_use_ssc(dev_priv))
-					temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
-				else
-					temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
-			} else {
-				/* Enable SSC on PCH eDP if needed */
-				if (intel_panel_use_ssc(dev_priv)) {
-					DRM_ERROR("enabling SSC on PCH\n");
-					temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
-				}
-			}
+	if (has_edp_encoder) {
+		if (intel_panel_use_ssc(dev_priv)) {
+			temp |= DREF_SSC1_ENABLE;
 			I915_WRITE(PCH_DREF_CONTROL, temp);
+
 			POSTING_READ(PCH_DREF_CONTROL);
 			udelay(200);
 		}
+		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+		/* Enable CPU source on CPU attached eDP */
+		if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+			if (intel_panel_use_ssc(dev_priv))
+				temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+			else
+				temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+		} else {
+			/* Enable SSC on PCH eDP if needed */
+			if (intel_panel_use_ssc(dev_priv)) {
+				DRM_ERROR("enabling SSC on PCH\n");
+				temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
+			}
+		}
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+		POSTING_READ(PCH_DREF_CONTROL);
+		udelay(200);
 	}
 
 	if (IS_PINEVIEW(dev)) {
@@ -4792,24 +5182,19 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	}
 
 	/* Enable autotuning of the PLL clock (if permissible) */
-	if (HAS_PCH_SPLIT(dev)) {
-		int factor = 21;
-
-		if (is_lvds) {
-			if ((intel_panel_use_ssc(dev_priv) &&
-			     dev_priv->lvds_ssc_freq == 100) ||
-			    (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
-				factor = 25;
-		} else if (is_sdvo && is_tv)
-			factor = 20;
+	factor = 21;
+	if (is_lvds) {
+		if ((intel_panel_use_ssc(dev_priv) &&
+		     dev_priv->lvds_ssc_freq == 100) ||
+		    (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
+			factor = 25;
+	} else if (is_sdvo && is_tv)
+		factor = 20;
 
-		if (clock.m1 < factor * clock.n)
-			fp |= FP_CB_TUNE;
-	}
+	if (clock.m1 < factor * clock.n)
+		fp |= FP_CB_TUNE;
 
 	dpll = 0;
-	if (!HAS_PCH_SPLIT(dev))
-		dpll = DPLL_VGA_MODE_DIS;
 
 	if (!IS_GEN2(dev)) {
 		if (is_lvds)
@@ -4821,7 +5206,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			if (pixel_multiplier > 1) {
 				if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
 					dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
-				else if (HAS_PCH_SPLIT(dev))
+				else
 					dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 			}
 			dpll |= DPLL_DVO_HIGH_SPEED;
@@ -4835,8 +5220,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		else {
 			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
 			/* also FPA1 */
-			if (HAS_PCH_SPLIT(dev))
-				dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
 			if (IS_G4X(dev) && has_reduced_clock)
 				dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
 		}
@@ -4854,8 +5238,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
 			break;
 		}
-		if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
-			dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
 	} else {
 		if (is_lvds) {
 			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
@@ -4886,15 +5268,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	/* Set up the display plane register */
 	dspcntr = DISPPLANE_GAMMA_ENABLE;
 
-	/* Ironlake's plane is forced to pipe, bit 24 is to
-	   enable color space conversion */
-	if (!HAS_PCH_SPLIT(dev)) {
-		if (pipe == 0)
-			dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
-		else
-			dspcntr |= DISPPLANE_SEL_PIPE_B;
-	}
-
 	if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
 		/* Enable pixel doubling when the dot clock is > 90% of the (display)
 		 * core speed.
@@ -4909,20 +5282,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			pipeconf &= ~PIPECONF_DOUBLE_WIDE;
 	}
 
-	if (!HAS_PCH_SPLIT(dev))
-		dpll |= DPLL_VCO_ENABLE;
-
 	DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
 	drm_mode_debug_printmodeline(mode);
 
 	/* assign to Ironlake registers */
-	if (HAS_PCH_SPLIT(dev)) {
-		fp_reg = PCH_FP0(pipe);
-		dpll_reg = PCH_DPLL(pipe);
-	} else {
-		fp_reg = FP0(pipe);
-		dpll_reg = DPLL(pipe);
-	}
+	fp_reg = PCH_FP0(pipe);
+	dpll_reg = PCH_DPLL(pipe);
 
 	/* PCH eDP needs FDI, but CPU eDP does not */
 	if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
@@ -4961,9 +5326,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	 * things on.
 	 */
 	if (is_lvds) {
-		reg = LVDS;
-		if (HAS_PCH_SPLIT(dev))
-			reg = PCH_LVDS;
+		reg = PCH_LVDS;
 
 		temp = I915_READ(reg);
 		temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
@@ -4992,13 +5355,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		 * appropriately here, but we need to look more thoroughly into how
 		 * panels behave in the two modes.
 		 */
-		/* set the dithering flag on non-PCH LVDS as needed */
-		if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
-			if (dev_priv->lvds_dither)
-				temp |= LVDS_ENABLE_DITHER;
-			else
-				temp &= ~LVDS_ENABLE_DITHER;
-		}
 		if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
 			lvds_sync |= LVDS_HSYNC_POLARITY;
 		if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
@@ -5019,18 +5375,16 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	}
 
 	/* set the dithering flag and clear for anything other than a panel. */
-	if (HAS_PCH_SPLIT(dev)) {
-		pipeconf &= ~PIPECONF_DITHER_EN;
-		pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
-		if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) {
-			pipeconf |= PIPECONF_DITHER_EN;
-			pipeconf |= PIPECONF_DITHER_TYPE_ST1;
-		}
+	pipeconf &= ~PIPECONF_DITHER_EN;
+	pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
+	if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) {
+		pipeconf |= PIPECONF_DITHER_EN;
+		pipeconf |= PIPECONF_DITHER_TYPE_ST1;
 	}
 
 	if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
-	} else if (HAS_PCH_SPLIT(dev)) {
+	} else {
 		/* For non-DP output, clear any trans DP clock recovery setting.*/
 		I915_WRITE(TRANSDATA_M1(pipe), 0);
 		I915_WRITE(TRANSDATA_N1(pipe), 0);
@@ -5038,31 +5392,20 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		I915_WRITE(TRANSDPLINK_N1(pipe), 0);
 	}
 
-	if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+	if (!has_edp_encoder ||
+	    intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
 		I915_WRITE(dpll_reg, dpll);
 
 		/* Wait for the clocks to stabilize. */
 		POSTING_READ(dpll_reg);
 		udelay(150);
 
-		if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
-			temp = 0;
-			if (is_sdvo) {
-				temp = intel_mode_get_pixel_multiplier(adjusted_mode);
-				if (temp > 1)
-					temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
-				else
-					temp = 0;
-			}
-			I915_WRITE(DPLL_MD(pipe), temp);
-		} else {
-			/* The pixel multiplier can only be updated once the
-			 * DPLL is enabled and the clocks are stable.
-			 *
-			 * So write it again.
-			 */
-			I915_WRITE(dpll_reg, dpll);
-		}
+		/* The pixel multiplier can only be updated once the
+		 * DPLL is enabled and the clocks are stable.
+		 *
+		 * So write it again.
+		 */
+		I915_WRITE(dpll_reg, dpll);
 	}
 
 	intel_crtc->lowfreq_avail = false;
@@ -5113,33 +5456,24 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		   (adjusted_mode->crtc_vsync_start - 1) |
 		   ((adjusted_mode->crtc_vsync_end - 1) << 16));
 
-	/* pipesrc and dspsize control the size that is scaled from,
-	 * which should always be the user's requested size.
+	/* pipesrc controls the size that is scaled from, which should
+	 * always be the user's requested size.
 	 */
-	if (!HAS_PCH_SPLIT(dev)) {
-		I915_WRITE(DSPSIZE(plane),
-			   ((mode->vdisplay - 1) << 16) |
-			   (mode->hdisplay - 1));
-		I915_WRITE(DSPPOS(plane), 0);
-	}
 	I915_WRITE(PIPESRC(pipe),
 		   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
 
-	if (HAS_PCH_SPLIT(dev)) {
-		I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
-		I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
-		I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
-		I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
+	I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
+	I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
+	I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
+	I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
 
-		if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
-			ironlake_set_pll_edp(crtc, adjusted_mode->clock);
-		}
+	if (has_edp_encoder &&
+	    !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		ironlake_set_pll_edp(crtc, adjusted_mode->clock);
 	}
 
 	I915_WRITE(PIPECONF(pipe), pipeconf);
 	POSTING_READ(PIPECONF(pipe));
-	if (!HAS_PCH_SPLIT(dev))
-		intel_enable_pipe(dev_priv, pipe, false);
 
 	intel_wait_for_vblank(dev, pipe);
 
@@ -5151,13 +5485,31 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
 	I915_WRITE(DSPCNTR(plane), dspcntr);
 	POSTING_READ(DSPCNTR(plane));
-	if (!HAS_PCH_SPLIT(dev))
-		intel_enable_plane(dev_priv, plane, pipe);
 
 	ret = intel_pipe_set_base(crtc, x, y, old_fb);
 
 	intel_update_watermarks(dev);
 
+	return ret;
+}
+
+static int intel_crtc_mode_set(struct drm_crtc *crtc,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode,
+			       int x, int y,
+			       struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int ret;
+
+	drm_vblank_pre_modeset(dev, pipe);
+
+	ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
+					      x, y, old_fb);
+
 	drm_vblank_post_modeset(dev, pipe);
 
 	return ret;
@@ -5480,43 +5832,140 @@ static struct drm_display_mode load_detect_mode = {
 		 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
 };
 
-struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
-					    struct drm_connector *connector,
-					    struct drm_display_mode *mode,
-					    int *dpms_mode)
+static struct drm_framebuffer *
+intel_framebuffer_create(struct drm_device *dev,
+			 struct drm_mode_fb_cmd *mode_cmd,
+			 struct drm_i915_gem_object *obj)
+{
+	struct intel_framebuffer *intel_fb;
+	int ret;
+
+	intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
+	if (!intel_fb) {
+		drm_gem_object_unreference_unlocked(&obj->base);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
+	if (ret) {
+		drm_gem_object_unreference_unlocked(&obj->base);
+		kfree(intel_fb);
+		return ERR_PTR(ret);
+	}
+
+	return &intel_fb->base;
+}
+
+static u32
+intel_framebuffer_pitch_for_width(int width, int bpp)
+{
+	u32 pitch = DIV_ROUND_UP(width * bpp, 8);
+	return ALIGN(pitch, 64);
+}
+
+static u32
+intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
+{
+	u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
+	return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
+}
+
+static struct drm_framebuffer *
+intel_framebuffer_create_for_mode(struct drm_device *dev,
+				  struct drm_display_mode *mode,
+				  int depth, int bpp)
+{
+	struct drm_i915_gem_object *obj;
+	struct drm_mode_fb_cmd mode_cmd;
+
+	obj = i915_gem_alloc_object(dev,
+				    intel_framebuffer_size_for_mode(mode, bpp));
+	if (obj == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	mode_cmd.width = mode->hdisplay;
+	mode_cmd.height = mode->vdisplay;
+	mode_cmd.depth = depth;
+	mode_cmd.bpp = bpp;
+	mode_cmd.pitch = intel_framebuffer_pitch_for_width(mode_cmd.width, bpp);
+
+	return intel_framebuffer_create(dev, &mode_cmd, obj);
+}
+
+static struct drm_framebuffer *
+mode_fits_in_fbdev(struct drm_device *dev,
+		   struct drm_display_mode *mode)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	struct drm_framebuffer *fb;
+
+	if (dev_priv->fbdev == NULL)
+		return NULL;
+
+	obj = dev_priv->fbdev->ifb.obj;
+	if (obj == NULL)
+		return NULL;
+
+	fb = &dev_priv->fbdev->ifb.base;
+	if (fb->pitch < intel_framebuffer_pitch_for_width(mode->hdisplay,
+							  fb->bits_per_pixel))
+		return NULL;
+
+	if (obj->base.size < mode->vdisplay * fb->pitch)
+		return NULL;
+
+	return fb;
+}
+
+bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
+				struct drm_connector *connector,
+				struct drm_display_mode *mode,
+				struct intel_load_detect_pipe *old)
 {
 	struct intel_crtc *intel_crtc;
 	struct drm_crtc *possible_crtc;
-	struct drm_crtc *supported_crtc =NULL;
 	struct drm_encoder *encoder = &intel_encoder->base;
 	struct drm_crtc *crtc = NULL;
 	struct drm_device *dev = encoder->dev;
-	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
-	struct drm_crtc_helper_funcs *crtc_funcs;
+	struct drm_framebuffer *old_fb;
 	int i = -1;
 
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
+		      connector->base.id, drm_get_connector_name(connector),
+		      encoder->base.id, drm_get_encoder_name(encoder));
+
 	/*
 	 * Algorithm gets a little messy:
+	 *
 	 *   - if the connector already has an assigned crtc, use it (but make
 	 *     sure it's on first)
+	 *
 	 *   - try to find the first unused crtc that can drive this connector,
 	 *     and use that if we find one
-	 *   - if there are no unused crtcs available, try to use the first
-	 *     one we found that supports the connector
 	 */
 
 	/* See if we already have a CRTC for this connector */
 	if (encoder->crtc) {
 		crtc = encoder->crtc;
-		/* Make sure the crtc and connector are running */
+
 		intel_crtc = to_intel_crtc(crtc);
-		*dpms_mode = intel_crtc->dpms_mode;
+		old->dpms_mode = intel_crtc->dpms_mode;
+		old->load_detect_temp = false;
+
+		/* Make sure the crtc and connector are running */
 		if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
+			struct drm_encoder_helper_funcs *encoder_funcs;
+			struct drm_crtc_helper_funcs *crtc_funcs;
+
 			crtc_funcs = crtc->helper_private;
 			crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+
+			encoder_funcs = encoder->helper_private;
 			encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
 		}
-		return crtc;
+
+		return true;
 	}
 
 	/* Find an unused one (if possible) */
@@ -5528,46 +5977,66 @@ struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
 			crtc = possible_crtc;
 			break;
 		}
-		if (!supported_crtc)
-			supported_crtc = possible_crtc;
 	}
 
 	/*
 	 * If we didn't find an unused CRTC, don't use any.
 	 */
 	if (!crtc) {
-		return NULL;
+		DRM_DEBUG_KMS("no pipe available for load-detect\n");
+		return false;
 	}
 
 	encoder->crtc = crtc;
 	connector->encoder = encoder;
-	intel_encoder->load_detect_temp = true;
 
 	intel_crtc = to_intel_crtc(crtc);
-	*dpms_mode = intel_crtc->dpms_mode;
+	old->dpms_mode = intel_crtc->dpms_mode;
+	old->load_detect_temp = true;
+	old->release_fb = NULL;
 
-	if (!crtc->enabled) {
-		if (!mode)
-			mode = &load_detect_mode;
-		drm_crtc_helper_set_mode(crtc, mode, 0, 0, crtc->fb);
-	} else {
-		if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
-			crtc_funcs = crtc->helper_private;
-			crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
-		}
+	if (!mode)
+		mode = &load_detect_mode;
+
+	old_fb = crtc->fb;
 
-		/* Add this connector to the crtc */
-		encoder_funcs->mode_set(encoder, &crtc->mode, &crtc->mode);
-		encoder_funcs->commit(encoder);
+	/* We need a framebuffer large enough to accommodate all accesses
+	 * that the plane may generate whilst we perform load detection.
+	 * We can not rely on the fbcon either being present (we get called
+	 * during its initialisation to detect all boot displays, or it may
+	 * not even exist) or that it is large enough to satisfy the
+	 * requested mode.
+	 */
+	crtc->fb = mode_fits_in_fbdev(dev, mode);
+	if (crtc->fb == NULL) {
+		DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
+		crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
+		old->release_fb = crtc->fb;
+	} else
+		DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
+	if (IS_ERR(crtc->fb)) {
+		DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
+		crtc->fb = old_fb;
+		return false;
+	}
+
+	if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) {
+		DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
+		if (old->release_fb)
+			old->release_fb->funcs->destroy(old->release_fb);
+		crtc->fb = old_fb;
+		return false;
 	}
+
 	/* let the connector get through one full cycle before testing */
 	intel_wait_for_vblank(dev, intel_crtc->pipe);
 
-	return crtc;
+	return true;
 }
 
 void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
-				    struct drm_connector *connector, int dpms_mode)
+				    struct drm_connector *connector,
+				    struct intel_load_detect_pipe *old)
 {
 	struct drm_encoder *encoder = &intel_encoder->base;
 	struct drm_device *dev = encoder->dev;
@@ -5575,19 +6044,24 @@ void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
 	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
 	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 
-	if (intel_encoder->load_detect_temp) {
-		encoder->crtc = NULL;
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
+		      connector->base.id, drm_get_connector_name(connector),
+		      encoder->base.id, drm_get_encoder_name(encoder));
+
+	if (old->load_detect_temp) {
 		connector->encoder = NULL;
-		intel_encoder->load_detect_temp = false;
-		crtc->enabled = drm_helper_crtc_in_use(crtc);
 		drm_helper_disable_unused_functions(dev);
+
+		if (old->release_fb)
+			old->release_fb->funcs->destroy(old->release_fb);
+
+		return;
 	}
 
 	/* Switch crtc and encoder back off if necessary */
-	if (crtc->enabled && dpms_mode != DRM_MODE_DPMS_ON) {
-		if (encoder->crtc == crtc)
-			encoder_funcs->dpms(encoder, dpms_mode);
-		crtc_funcs->dpms(crtc, dpms_mode);
+	if (old->dpms_mode != DRM_MODE_DPMS_ON) {
+		encoder_funcs->dpms(encoder, old->dpms_mode);
+		crtc_funcs->dpms(crtc, old->dpms_mode);
 	}
 }
 
@@ -5602,9 +6076,9 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
 	intel_clock_t clock;
 
 	if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
-		fp = FP0(pipe);
+		fp = I915_READ(FP0(pipe));
 	else
-		fp = FP1(pipe);
+		fp = I915_READ(FP1(pipe));
 
 	clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
 	if (IS_PINEVIEW(dev)) {
@@ -6215,36 +6689,6 @@ cleanup_work:
 	return ret;
 }
 
-static void intel_crtc_reset(struct drm_crtc *crtc)
-{
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
-	/* Reset flags back to the 'unknown' status so that they
-	 * will be correctly set on the initial modeset.
-	 */
-	intel_crtc->dpms_mode = -1;
-}
-
-static struct drm_crtc_helper_funcs intel_helper_funcs = {
-	.dpms = intel_crtc_dpms,
-	.mode_fixup = intel_crtc_mode_fixup,
-	.mode_set = intel_crtc_mode_set,
-	.mode_set_base = intel_pipe_set_base,
-	.mode_set_base_atomic = intel_pipe_set_base_atomic,
-	.load_lut = intel_crtc_load_lut,
-	.disable = intel_crtc_disable,
-};
-
-static const struct drm_crtc_funcs intel_crtc_funcs = {
-	.reset = intel_crtc_reset,
-	.cursor_set = intel_crtc_cursor_set,
-	.cursor_move = intel_crtc_cursor_move,
-	.gamma_set = intel_crtc_gamma_set,
-	.set_config = drm_crtc_helper_set_config,
-	.destroy = intel_crtc_destroy,
-	.page_flip = intel_crtc_page_flip,
-};
-
 static void intel_sanitize_modesetting(struct drm_device *dev,
 				       int pipe, int plane)
 {
@@ -6281,6 +6725,42 @@ static void intel_sanitize_modesetting(struct drm_device *dev,
 	intel_disable_pipe(dev_priv, pipe);
 }
 
+static void intel_crtc_reset(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	/* Reset flags back to the 'unknown' status so that they
+	 * will be correctly set on the initial modeset.
+	 */
+	intel_crtc->dpms_mode = -1;
+
+	/* We need to fix up any BIOS configuration that conflicts with
+	 * our expectations.
+	 */
+	intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
+}
+
+static struct drm_crtc_helper_funcs intel_helper_funcs = {
+	.dpms = intel_crtc_dpms,
+	.mode_fixup = intel_crtc_mode_fixup,
+	.mode_set = intel_crtc_mode_set,
+	.mode_set_base = intel_pipe_set_base,
+	.mode_set_base_atomic = intel_pipe_set_base_atomic,
+	.load_lut = intel_crtc_load_lut,
+	.disable = intel_crtc_disable,
+};
+
+static const struct drm_crtc_funcs intel_crtc_funcs = {
+	.reset = intel_crtc_reset,
+	.cursor_set = intel_crtc_cursor_set,
+	.cursor_move = intel_crtc_cursor_move,
+	.gamma_set = intel_crtc_gamma_set,
+	.set_config = drm_crtc_helper_set_config,
+	.destroy = intel_crtc_destroy,
+	.page_flip = intel_crtc_page_flip,
+};
+
 static void intel_crtc_init(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
@@ -6330,8 +6810,6 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 
 	setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
 		    (unsigned long)intel_crtc);
-
-	intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
 }
 
 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
@@ -6564,25 +7042,12 @@ intel_user_framebuffer_create(struct drm_device *dev,
 			      struct drm_mode_fb_cmd *mode_cmd)
 {
 	struct drm_i915_gem_object *obj;
-	struct intel_framebuffer *intel_fb;
-	int ret;
 
 	obj = to_intel_bo(drm_gem_object_lookup(dev, filp, mode_cmd->handle));
 	if (&obj->base == NULL)
 		return ERR_PTR(-ENOENT);
 
-	intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
-	if (!intel_fb)
-		return ERR_PTR(-ENOMEM);
-
-	ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
-	if (ret) {
-		drm_gem_object_unreference_unlocked(&obj->base);
-		kfree(intel_fb);
-		return ERR_PTR(ret);
-	}
-
-	return &intel_fb->base;
+	return intel_framebuffer_create(dev, mode_cmd, obj);
 }
 
 static const struct drm_mode_config_funcs intel_mode_funcs = {
@@ -7215,10 +7680,13 @@ static void intel_init_display(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	/* We always want a DPMS function */
-	if (HAS_PCH_SPLIT(dev))
+	if (HAS_PCH_SPLIT(dev)) {
 		dev_priv->display.dpms = ironlake_crtc_dpms;
-	else
+		dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
+	} else {
 		dev_priv->display.dpms = i9xx_crtc_dpms;
+		dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
+	}
 
 	if (I915_HAS_FBC(dev)) {
 		if (HAS_PCH_SPLIT(dev)) {