X-Git-Url: http://pileus.org/git/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_optidma.c;h=4cd7444563134b88e3ec8da38f9c8502556754a4;hb=2486fa561a3192bbbec39c7feef87a1e07bd6342;hp=eb4b08190e3ab9c14a053bb905d5de8b0368ab89;hpb=029cfd6b74fc5c517865fad78cf4a3ea8d9b664a;p=~andy%2Flinux

diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index eb4b08190e3..4cd74445631 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -64,22 +64,7 @@ static int optidma_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
-}
-
-/**
- *	optidma_probe_reset		-	probe reset
- *	@ap: ATA port
- *
- *	Perform the ATA probe and bus reset sequence plus specific handling
- *	for this hardware. The Opti needs little handling - we have no UDMA66
- *	capability that needs cable detection. All we must do is check the port
- *	is enabled.
- */
-
-static void optidma_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, optidma_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -359,7 +344,7 @@ static struct ata_port_operations optidma_port_ops = {
 	.set_piomode	= optidma_set_pio_mode,
 	.set_dmamode	= optidma_set_dma_mode,
 	.set_mode	= optidma_set_mode,
-	.error_handler	= optidma_error_handler,
+	.prereset	= optidma_pre_reset,
 };
 
 static struct ata_port_operations optiplus_port_ops = {
@@ -414,14 +399,12 @@ done_nomsg:		/* Wrong chip revision */
 static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_82c700 = {
-		.sht = &optidma_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.port_ops = &optidma_port_ops
 	};
 	static const struct ata_port_info info_82c700_udma = {
-		.sht = &optidma_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -447,7 +430,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (optiplus_with_udma(dev))
 		ppi[0] = &info_82c700_udma;
 
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL);
 }
 
 static const struct pci_device_id optidma[] = {