X-Git-Url: http://pileus.org/git/?a=blobdiff_plain;f=drivers%2Fata%2Flibata-scsi.c;h=b9d3ba423cb2d30eefc17bb349bee2376f624343;hb=3859069bc3358772b08bd91efe9edec39a746ea8;hp=b578b11caa7b4b303641c791110c94e23097f001;hpb=18f7ba4c2f4be6b37d925931f04d6cc28d88d1ee;p=~andy%2Flinux

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b578b11caa7..b9d3ba423cb 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -964,7 +964,8 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
 		/* set the min alignment and padding */
 		blk_queue_update_dma_alignment(sdev->request_queue,
 					       ATA_DMA_PAD_SZ - 1);
-		blk_queue_dma_pad(sdev->request_queue, ATA_DMA_PAD_SZ - 1);
+		blk_queue_update_dma_pad(sdev->request_queue,
+					 ATA_DMA_PAD_SZ - 1);
 
 		/* configure draining */
 		buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL);
@@ -1857,7 +1858,9 @@ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf)
 	const u8 pages[] = {
 		0x00,	/* page 0x00, this page */
 		0x80,	/* page 0x80, unit serial no page */
-		0x83	/* page 0x83, device ident page */
+		0x83,	/* page 0x83, device ident page */
+		0x89,	/* page 0x89, ata info page */
+		0xb1,	/* page 0xb1, block device characteristics page */
 	};
 
 	rbuf[3] = sizeof(pages);	/* number of supported VPD pages */
@@ -1978,6 +1981,19 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf)
 	return 0;
 }
 
+static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
+{
+	rbuf[1] = 0xb1;
+	rbuf[3] = 0x3c;
+	if (ata_id_major_version(args->id) > 7) {
+		rbuf[4] = args->id[217] >> 8;
+		rbuf[5] = args->id[217];
+		rbuf[7] = args->id[168] & 0xf;
+	}
+
+	return 0;
+}
+
 /**
  *	ata_scsiop_noop - Command handler that simply returns success.
  *	@args: device IDENTIFY data / SCSI command of interest.
@@ -2534,36 +2550,6 @@ static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
 	return ata_find_dev(ap, devno);
 }
 
-/**
- *	ata_scsi_dev_enabled - determine if device is enabled
- *	@dev: ATA device
- *
- *	Determine if commands should be sent to the specified device.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	0 if commands are not allowed / 1 if commands are allowed
- */
-
-static int ata_scsi_dev_enabled(struct ata_device *dev)
-{
-	if (unlikely(!ata_dev_enabled(dev)))
-		return 0;
-
-	if (!atapi_enabled || (dev->link->ap->flags & ATA_FLAG_NO_ATAPI)) {
-		if (unlikely(dev->class == ATA_DEV_ATAPI)) {
-			ata_dev_printk(dev, KERN_WARNING,
-				       "WARNING: ATAPI is %s, device ignored.\n",
-				       atapi_enabled ? "not supported with this driver" : "disabled");
-			return 0;
-		}
-	}
-
-	return 1;
-}
-
 /**
  *	ata_scsi_find_dev - lookup ata_device from scsi_cmnd
  *	@ap: ATA port to which the device is attached
@@ -2585,7 +2571,7 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
 {
 	struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev);
 
-	if (unlikely(!dev || !ata_scsi_dev_enabled(dev)))
+	if (unlikely(!dev || !ata_dev_enabled(dev)))
 		return NULL;
 
 	return dev;
@@ -2999,6 +2985,9 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
 		case 0x89:
 			ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89);
 			break;
+		case 0xb1:
+			ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1);
+			break;
 		default:
 			ata_scsi_invalid_field(cmd, done);
 			break;
@@ -3603,7 +3592,7 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
 
 	ata_scsi_dump_cdb(ap, cmd);
 
-	if (likely(ata_scsi_dev_enabled(ap->link.device)))
+	if (likely(ata_dev_enabled(ap->link.device)))
 		rc = __ata_scsi_queuecmd(cmd, done, ap->link.device);
 	else {
 		cmd->result = (DID_BAD_TARGET << 16);