X-Git-Url: http://pileus.org/git/?a=blobdiff_plain;f=arch%2Fmips%2Fsibyte%2Fsb1250%2Ftime.c;h=68337bf7a5aa6d0d5c9429032ed365e20ad272b8;hb=f8843c91c60ed744cc7dd6326e44ddb91250ab35;hp=fe11fed8e0d73e25857678d0c68746d9abb21887;hpb=d20ead9e86881bc7ae84e385f47b5196b7d93aac;p=~andy%2Flinux diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c index fe11fed8e0d..68337bf7a5a 100644 --- a/arch/mips/sibyte/sb1250/time.c +++ b/arch/mips/sibyte/sb1250/time.c @@ -15,255 +15,13 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +#include -/* - * These are routines to set up and handle interrupts from the - * sb1250 general purpose timer 0. We're using the timer as a - * system clock, so we set it up to run at 100 Hz. On every - * interrupt, we update our idea of what the time of day is, - * then call do_timer() in the architecture-independent kernel - * code to do general bookkeeping (e.g. update jiffies, run - * bottom halves, etc.) - */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - - -#define IMR_IP2_VAL K_INT_MAP_I0 -#define IMR_IP3_VAL K_INT_MAP_I1 -#define IMR_IP4_VAL K_INT_MAP_I2 - -#define SB1250_HPT_NUM 3 -#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */ - - -extern int sb1250_steal_irq(int irq); - -static cycle_t sb1250_hpt_read(void); - -void __init sb1250_hpt_setup(void) -{ - int cpu = smp_processor_id(); - - if (!cpu) { - /* Setup hpt using timer #3 but do not enable irq for it */ - __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); - __raw_writeq(SB1250_HPT_VALUE, - IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_INIT))); - __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, - IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); - - mips_hpt_frequency = V_SCD_TIMER_FREQ; - clocksource_mips.read = sb1250_hpt_read; - clocksource_mips.mask = M_SCD_TIMER_INIT; - } -} - -/* - * The general purpose timer ticks at 1 Mhz independent if - * the rest of the system - */ -static void sibyte_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned int cpu = smp_processor_id(); - void __iomem *timer_cfg, *timer_init; - - timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); - timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - __raw_writeq(0, timer_cfg); - __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init); - __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, - timer_cfg); - break; - - case CLOCK_EVT_MODE_ONESHOT: - /* Stop the timer until we actually program a shot */ - case CLOCK_EVT_MODE_SHUTDOWN: - __raw_writeq(0, timer_cfg); - break; - - case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */ - ; - } -} - -static int -sibyte_next_event(unsigned long delta, struct clock_event_device *evt) -{ - unsigned int cpu = smp_processor_id(); - void __iomem *timer_cfg, *timer_init; - - timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); - timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); - - __raw_writeq(0, timer_cfg); - __raw_writeq(delta, timer_init); - __raw_writeq(M_SCD_TIMER_ENABLE, timer_cfg); - - return 0; -} - -struct clock_event_device sibyte_hpt_clockevent = { - .name = "sb1250-counter", - .features = CLOCK_EVT_FEAT_PERIODIC, - .set_mode = sibyte_set_mode, - .set_next_event = sibyte_next_event, - .shift = 32, - .irq = 0, -}; - -static irqreturn_t sibyte_counter_handler(int irq, void *dev_id) -{ - struct clock_event_device *cd = &sibyte_hpt_clockevent; - - cd->event_handler(cd); - - return IRQ_HANDLED; -} - -static struct irqaction sibyte_irqaction = { - .handler = sibyte_counter_handler, - .flags = IRQF_DISABLED | IRQF_PERCPU, - .name = "timer", -}; - -/* - * The general purpose timer ticks at 1 Mhz independent if - * the rest of the system - */ -static void sibyte_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned int cpu = smp_processor_id(); - void __iomem *timer_cfg, *timer_init; - - timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); - timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - __raw_writeq(0, timer_cfg); - __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init); - __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, - timer_cfg); - break; - - case CLOCK_EVT_MODE_ONESHOT: - /* Stop the timer until we actually program a shot */ - case CLOCK_EVT_MODE_SHUTDOWN: - __raw_writeq(0, timer_cfg); - break; - - case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */ - ; - } -} - -static int -sibyte_next_event(unsigned long delta, struct clock_event_device *evt) -{ - unsigned int cpu = smp_processor_id(); - void __iomem *timer_cfg, *timer_init; - - timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); - timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); - - __raw_writeq(0, timer_cfg); - __raw_writeq(delta, timer_init); - __raw_writeq(M_SCD_TIMER_ENABLE, timer_cfg); - - return 0; -} - -struct clock_event_device sibyte_hpt_clockevent = { - .name = "sb1250-counter", - .features = CLOCK_EVT_FEAT_PERIODIC, - .set_mode = sibyte_set_mode, - .set_next_event = sibyte_next_event, - .shift = 32, - .irq = 0, -}; - -static irqreturn_t sibyte_counter_handler(int irq, void *dev_id) -{ - struct clock_event_device *cd = &sibyte_hpt_clockevent; - - cd->event_handler(cd); - - return IRQ_HANDLED; -} - -static struct irqaction sibyte_irqaction = { - .handler = sibyte_counter_handler, - .flags = IRQF_DISABLED | IRQF_PERCPU, - .name = "timer", -}; - -static void __init sb1250_clockevent_init(void) -{ - struct clock_event_device *cd = &sibyte_hpt_clockevent; - unsigned int cpu = smp_processor_id(); - int irq = K_INT_TIMER_0 + cpu; - - /* Only have 4 general purpose timers, and we use last one as hpt */ - BUG_ON(cpu > 2); - - sb1250_mask_irq(cpu, irq); - - /* Map the timer interrupt to ip[4] of this cpu */ - __raw_writeq(IMR_IP4_VAL, - IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) + - (irq << 3))); - cd->cpumask = cpumask_of_cpu(0); - - sb1250_unmask_irq(cpu, irq); - sb1250_steal_irq(irq); - - /* - * This interrupt is "special" in that it doesn't use the request_irq - * way to hook the irq line. The timer interrupt is initialized early - * enough to make this a major pain, and it's also firing enough to - * warrant a bit of special case code. sb1250_timer_interrupt is - * called directly from irq_handler.S when IP[4] is set during an - * interrupt - */ - setup_irq(irq, &sibyte_irqaction); - - clockevents_register_device(cd); -} +extern void sb1250_clocksource_init(void); +extern void sb1250_clockevent_init(void); void __init plat_time_init(void) { sb1250_clocksource_init(); sb1250_clockevent_init(); } - -/* - * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over - * again. - */ -static cycle_t sb1250_hpt_read(void) -{ - unsigned int count; - - count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT)))); - - return SB1250_HPT_VALUE - count; -}