#define HPOUT2L 4
#define HPOUT2R 8
-#define WM8996_NUM_SUPPLIES 4
+#define WM8996_NUM_SUPPLIES 3
static const char *wm8996_supply_names[WM8996_NUM_SUPPLIES] = {
"DBVDD",
"AVDD1",
"AVDD2",
- "CPVDD",
};
struct wm8996_priv {
struct regulator_bulk_data supplies[WM8996_NUM_SUPPLIES];
struct notifier_block disable_nb[WM8996_NUM_SUPPLIES];
+ struct regulator *cpvdd;
+ int bg_ena;
struct wm8996_pdata pdata;
WM8996_REGULATOR_EVENT(0)
WM8996_REGULATOR_EVENT(1)
WM8996_REGULATOR_EVENT(2)
-WM8996_REGULATOR_EVENT(3)
static const u16 wm8996_reg[WM8996_MAX_REGISTER] = {
[WM8996_SOFTWARE_RESET] = 0x8996,
static const DECLARE_TLV_DB_SCALE(out_tlv, -900, 75, 0);
static const DECLARE_TLV_DB_SCALE(spk_tlv, -900, 150, 0);
static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static const DECLARE_TLV_DB_SCALE(threedstereo_tlv, -1600, 183, 1);
static const char *sidetone_hpf_text[] = {
"2.9kHz", "1.5kHz", "735Hz", "403Hz", "196Hz", "98Hz", "49Hz"
};
static const struct soc_enum sidetone_hpf =
- SOC_ENUM_SINGLE(WM8996_SIDETONE, 7, 6, sidetone_hpf_text);
+ SOC_ENUM_SINGLE(WM8996_SIDETONE, 7, 7, sidetone_hpf_text);
static const char *hpf_mode_text[] = {
"HiFi", "Custom", "Voice"
SOC_SINGLE("DAC Soft Mute Switch", WM8996_DAC_SOFTMUTE, 1, 1, 0),
SOC_SINGLE("DAC Slow Soft Mute Switch", WM8996_DAC_SOFTMUTE, 0, 1, 0),
+SOC_SINGLE("DSP1 3D Stereo Switch", WM8996_DSP1_RX_FILTERS_2, 8, 1, 0),
+SOC_SINGLE("DSP2 3D Stereo Switch", WM8996_DSP2_RX_FILTERS_2, 8, 1, 0),
+
+SOC_SINGLE_TLV("DSP1 3D Stereo Volume", WM8996_DSP1_RX_FILTERS_2, 10, 15,
+ 0, threedstereo_tlv),
+SOC_SINGLE_TLV("DSP2 3D Stereo Volume", WM8996_DSP2_RX_FILTERS_2, 10, 15,
+ 0, threedstereo_tlv),
+
SOC_DOUBLE_TLV("Digital Output 1 Volume", WM8996_DAC1_HPOUT1_VOLUME, 0, 4,
8, 0, out_digital_tlv),
SOC_DOUBLE_TLV("Digital Output 2 Volume", WM8996_DAC2_HPOUT2_VOLUME, 0, 4,
SOC_SINGLE("DSP1 EQ Switch", WM8996_DSP1_RX_EQ_GAINS_1, 0, 1, 0),
SOC_SINGLE("DSP2 EQ Switch", WM8996_DSP2_RX_EQ_GAINS_1, 0, 1, 0),
+
+SOC_SINGLE("DSP1 DRC TXL Switch", WM8996_DSP1_DRC_1, 0, 1, 0),
+SOC_SINGLE("DSP1 DRC TXR Switch", WM8996_DSP1_DRC_1, 1, 1, 0),
+SOC_SINGLE("DSP1 DRC RX Switch", WM8996_DSP1_DRC_1, 2, 1, 0),
+
+SOC_SINGLE("DSP2 DRC TXL Switch", WM8996_DSP2_DRC_1, 0, 1, 0),
+SOC_SINGLE("DSP2 DRC TXR Switch", WM8996_DSP2_DRC_1, 1, 1, 0),
+SOC_SINGLE("DSP2 DRC RX Switch", WM8996_DSP2_DRC_1, 2, 1, 0),
};
static const struct snd_kcontrol_new wm8996_eq_controls[] = {
eq_tlv),
};
+static void wm8996_bg_enable(struct snd_soc_codec *codec)
+{
+ struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
+
+ wm8996->bg_ena++;
+ if (wm8996->bg_ena == 1) {
+ snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1,
+ WM8996_BG_ENA, WM8996_BG_ENA);
+ msleep(2);
+ }
+}
+
+static void wm8996_bg_disable(struct snd_soc_codec *codec)
+{
+ struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
+
+ wm8996->bg_ena--;
+ if (!wm8996->bg_ena)
+ snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1,
+ WM8996_BG_ENA, 0);
+}
+
+static int bg_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ int ret = 0;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ wm8996_bg_enable(codec);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ wm8996_bg_disable(codec);
+ break;
+ default:
+ BUG();
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
static int cp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
+ int ret = 0;
+
switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ ret = regulator_enable(wm8996->cpvdd);
+ if (ret != 0)
+ dev_err(codec->dev, "Failed to enable CPVDD: %d\n",
+ ret);
+ break;
case SND_SOC_DAPM_POST_PMU:
msleep(5);
break;
+ case SND_SOC_DAPM_POST_PMD:
+ regulator_disable_deferred(wm8996->cpvdd, 20);
+ break;
default:
BUG();
- return -EINVAL;
+ ret = -EINVAL;
}
- return 0;
+ return ret;
}
static int rmv_short_event(struct snd_soc_dapm_widget *w,
{
struct i2c_client *i2c = to_i2c_client(codec->dev);
struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
- int i, ret;
+ int ret;
unsigned long timeout = 200;
snd_soc_write(codec, WM8996_DC_SERVO_2, mask);
} else {
msleep(1);
- if (--i) {
- timeout = 0;
- break;
- }
+ timeout--;
}
ret = snd_soc_read(codec, WM8996_DC_SERVO_2);
dev_dbg(codec->dev, "DC servo state: %x\n", ret);
- } while (ret & mask);
+ } while (timeout && ret & mask);
if (timeout == 0)
dev_err(codec->dev, "DC servo timed out for %x\n", mask);
SND_SOC_DAPM_SUPPLY_S("SYSDSPCLK", 2, WM8996_CLOCKING_1, 1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("AIFCLK", 2, WM8996_CLOCKING_1, 2, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("Charge Pump", 2, WM8996_CHARGE_PUMP_1, 15, 0, cp_event,
- SND_SOC_DAPM_POST_PMU),
-
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("Bandgap", SND_SOC_NOPM, 0, 0, bg_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_SUPPLY("LDO2", WM8996_POWER_MANAGEMENT_2, 1, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("MICB1 Audio", WM8996_MICBIAS_1, 4, 1, NULL, 0),
+SND_SOC_DAPM_SUPPLY("MICB2 Audio", WM8996_MICBIAS_2, 4, 1, NULL, 0),
SND_SOC_DAPM_MICBIAS("MICB2", WM8996_POWER_MANAGEMENT_1, 9, 0),
SND_SOC_DAPM_MICBIAS("MICB1", WM8996_POWER_MANAGEMENT_1, 8, 0),
SND_SOC_DAPM_PGA("IN1L PGA", WM8996_POWER_MANAGEMENT_2, 5, 0, NULL, 0),
SND_SOC_DAPM_PGA("IN1R PGA", WM8996_POWER_MANAGEMENT_2, 4, 0, NULL, 0),
-SND_SOC_DAPM_MUX("IN1L Mux", SND_SOC_NOPM, 0, 0, &in1_mux),
-SND_SOC_DAPM_MUX("IN1R Mux", SND_SOC_NOPM, 0, 0, &in1_mux),
-SND_SOC_DAPM_MUX("IN2L Mux", SND_SOC_NOPM, 0, 0, &in2_mux),
-SND_SOC_DAPM_MUX("IN2R Mux", SND_SOC_NOPM, 0, 0, &in2_mux),
-
-SND_SOC_DAPM_PGA("IN1L", WM8996_POWER_MANAGEMENT_7, 2, 0, NULL, 0),
-SND_SOC_DAPM_PGA("IN1R", WM8996_POWER_MANAGEMENT_7, 3, 0, NULL, 0),
-SND_SOC_DAPM_PGA("IN2L", WM8996_POWER_MANAGEMENT_7, 6, 0, NULL, 0),
-SND_SOC_DAPM_PGA("IN2R", WM8996_POWER_MANAGEMENT_7, 7, 0, NULL, 0),
+SND_SOC_DAPM_MUX("IN1L Mux", WM8996_POWER_MANAGEMENT_7, 2, 0, &in1_mux),
+SND_SOC_DAPM_MUX("IN1R Mux", WM8996_POWER_MANAGEMENT_7, 3, 0, &in1_mux),
+SND_SOC_DAPM_MUX("IN2L Mux", WM8996_POWER_MANAGEMENT_7, 6, 0, &in2_mux),
+SND_SOC_DAPM_MUX("IN2R Mux", WM8996_POWER_MANAGEMENT_7, 7, 0, &in2_mux),
SND_SOC_DAPM_SUPPLY("DMIC2", WM8996_POWER_MANAGEMENT_7, 9, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("DMIC1", WM8996_POWER_MANAGEMENT_7, 8, 0, NULL, 0),
SND_SOC_DAPM_DAC("DAC1L", NULL, WM8996_POWER_MANAGEMENT_5, 1, 0),
SND_SOC_DAPM_DAC("DAC1R", NULL, WM8996_POWER_MANAGEMENT_5, 0, 0),
-SND_SOC_DAPM_AIF_IN("AIF2RX1", "AIF2 Playback", 1,
+SND_SOC_DAPM_AIF_IN("AIF2RX1", "AIF2 Playback", 0,
WM8996_POWER_MANAGEMENT_4, 9, 0),
-SND_SOC_DAPM_AIF_IN("AIF2RX0", "AIF2 Playback", 2,
+SND_SOC_DAPM_AIF_IN("AIF2RX0", "AIF2 Playback", 1,
WM8996_POWER_MANAGEMENT_4, 8, 0),
-SND_SOC_DAPM_AIF_IN("AIF2TX1", "AIF2 Capture", 1,
+SND_SOC_DAPM_AIF_IN("AIF2TX1", "AIF2 Capture", 0,
WM8996_POWER_MANAGEMENT_6, 9, 0),
-SND_SOC_DAPM_AIF_IN("AIF2TX0", "AIF2 Capture", 2,
+SND_SOC_DAPM_AIF_IN("AIF2TX0", "AIF2 Capture", 1,
WM8996_POWER_MANAGEMENT_6, 8, 0),
SND_SOC_DAPM_AIF_IN("AIF1RX5", "AIF1 Playback", 5,
{ "Charge Pump", NULL, "SYSCLK" },
{ "MICB1", NULL, "LDO2" },
+ { "MICB1", NULL, "MICB1 Audio" },
+ { "MICB1", NULL, "Bandgap" },
{ "MICB2", NULL, "LDO2" },
+ { "MICB2", NULL, "MICB2 Audio" },
+ { "MICB2", NULL, "Bandgap" },
{ "IN1L PGA", NULL, "IN2LN" },
{ "IN1L PGA", NULL, "IN2LP" },
{ "IN1L PGA", NULL, "IN1LN" },
{ "IN1L PGA", NULL, "IN1LP" },
+ { "IN1L PGA", NULL, "Bandgap" },
{ "IN1R PGA", NULL, "IN2RN" },
{ "IN1R PGA", NULL, "IN2RP" },
{ "IN1R PGA", NULL, "IN1RN" },
{ "IN1R PGA", NULL, "IN1RP" },
+ { "IN1R PGA", NULL, "Bandgap" },
{ "ADCL", NULL, "IN1L PGA" },
{ "DAC2R", NULL, "DAC2R Mixer" },
{ "HPOUT2L PGA", NULL, "Charge Pump" },
+ { "HPOUT2L PGA", NULL, "Bandgap" },
{ "HPOUT2L PGA", NULL, "DAC2L" },
{ "HPOUT2L_DLY", NULL, "HPOUT2L PGA" },
{ "HPOUT2L_DCS", NULL, "HPOUT2L_DLY" },
{ "HPOUT2L_RMV_SHORT", NULL, "HPOUT2L_OUTP" },
{ "HPOUT2R PGA", NULL, "Charge Pump" },
+ { "HPOUT2R PGA", NULL, "Bandgap" },
{ "HPOUT2R PGA", NULL, "DAC2R" },
{ "HPOUT2R_DLY", NULL, "HPOUT2R PGA" },
{ "HPOUT2R_DCS", NULL, "HPOUT2R_DLY" },
{ "HPOUT2R_RMV_SHORT", NULL, "HPOUT2R_OUTP" },
{ "HPOUT1L PGA", NULL, "Charge Pump" },
+ { "HPOUT1L PGA", NULL, "Bandgap" },
{ "HPOUT1L PGA", NULL, "DAC1L" },
{ "HPOUT1L_DLY", NULL, "HPOUT1L PGA" },
{ "HPOUT1L_DCS", NULL, "HPOUT1L_DLY" },
{ "HPOUT1L_RMV_SHORT", NULL, "HPOUT1L_OUTP" },
{ "HPOUT1R PGA", NULL, "Charge Pump" },
+ { "HPOUT1R PGA", NULL, "Bandgap" },
{ "HPOUT1R PGA", NULL, "DAC1R" },
{ "HPOUT1R_DLY", NULL, "HPOUT1R PGA" },
{ "HPOUT1R_DCS", NULL, "HPOUT1R_DLY" },
switch (level) {
case SND_SOC_BIAS_ON:
- break;
-
case SND_SOC_BIAS_PREPARE:
- if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY) {
- snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1,
- WM8996_BG_ENA, WM8996_BG_ENA);
- msleep(2);
- }
break;
case SND_SOC_BIAS_STANDBY:
codec->cache_only = false;
snd_soc_cache_sync(codec);
}
-
- snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1,
- WM8996_BG_ENA, 0);
break;
case SND_SOC_BIAS_OFF:
struct i2c_client *i2c = to_i2c_client(codec->dev);
struct _fll_div fll_div;
unsigned long timeout;
- int ret, reg;
+ int ret, reg, retry;
/* Any change? */
if (source == wm8996->fll_src && Fref == wm8996->fll_fref &&
snd_soc_update_bits(codec, WM8996_FLL_CONTROL_1,
WM8996_FLL_ENA, 0);
+ wm8996_bg_disable(codec);
+
return 0;
}
snd_soc_write(codec, WM8996_FLL_EFS_1, fll_div.lambda);
+ /* Enable the bandgap if it's not already enabled */
+ ret = snd_soc_read(codec, WM8996_FLL_CONTROL_1);
+ if (!(ret & WM8996_FLL_ENA))
+ wm8996_bg_enable(codec);
+
+ /* Clear any pending completions (eg, from failed startups) */
+ try_wait_for_completion(&wm8996->fll_lock);
+
snd_soc_update_bits(codec, WM8996_FLL_CONTROL_1,
WM8996_FLL_ENA, WM8996_FLL_ENA);
else
timeout = msecs_to_jiffies(2);
- /* Allow substantially longer if we've actually got the IRQ */
+ /* Allow substantially longer if we've actually got the IRQ, poll
+ * at a slightly higher rate if we don't.
+ */
if (i2c->irq)
- timeout *= 1000;
+ timeout *= 10;
+ else
+ timeout /= 2;
- ret = wait_for_completion_timeout(&wm8996->fll_lock, timeout);
+ for (retry = 0; retry < 10; retry++) {
+ ret = wait_for_completion_timeout(&wm8996->fll_lock,
+ timeout);
+ if (ret != 0) {
+ WARN_ON(!i2c->irq);
+ break;
+ }
- if (ret == 0 && i2c->irq) {
+ ret = snd_soc_read(codec, WM8996_INTERRUPT_RAW_STATUS_2);
+ if (ret & WM8996_FLL_LOCK_STS)
+ break;
+ }
+ if (retry == 10) {
dev_err(codec->dev, "Timed out waiting for FLL\n");
ret = -ETIMEDOUT;
- } else {
- ret = 0;
}
dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout);
/* Enable interrupts and we're off */
snd_soc_update_bits(codec, WM8996_INTERRUPT_STATUS_2_MASK,
- WM8996_IM_MICD_EINT, 0);
+ WM8996_IM_MICD_EINT | WM8996_HP_DONE_EINT, 0);
return 0;
}
EXPORT_SYMBOL_GPL(wm8996_detect);
+static void wm8996_hpdet_irq(struct snd_soc_codec *codec)
+{
+ struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
+ int val, reg, report;
+
+ /* Assume headphone in error conditions; we need to report
+ * something or we stall our state machine.
+ */
+ report = SND_JACK_HEADPHONE;
+
+ reg = snd_soc_read(codec, WM8996_HEADPHONE_DETECT_2);
+ if (reg < 0) {
+ dev_err(codec->dev, "Failed to read HPDET status\n");
+ goto out;
+ }
+
+ if (!(reg & WM8996_HP_DONE)) {
+ dev_err(codec->dev, "Got HPDET IRQ but HPDET is busy\n");
+ goto out;
+ }
+
+ val = reg & WM8996_HP_LVL_MASK;
+
+ dev_dbg(codec->dev, "HPDET measured %d ohms\n", val);
+
+ /* If we've got high enough impedence then report as line,
+ * otherwise assume headphone.
+ */
+ if (val >= 126)
+ report = SND_JACK_LINEOUT;
+ else
+ report = SND_JACK_HEADPHONE;
+
+out:
+ if (wm8996->jack_mic)
+ report |= SND_JACK_MICROPHONE;
+
+ snd_soc_jack_report(wm8996->jack, report,
+ SND_JACK_LINEOUT | SND_JACK_HEADSET);
+
+ wm8996->detecting = false;
+
+ /* If the output isn't running re-clamp it */
+ if (!(snd_soc_read(codec, WM8996_POWER_MANAGEMENT_1) &
+ (WM8996_HPOUT1L_ENA | WM8996_HPOUT1R_RMV_SHORT)))
+ snd_soc_update_bits(codec, WM8996_ANALOGUE_HP_1,
+ WM8996_HPOUT1L_RMV_SHORT |
+ WM8996_HPOUT1R_RMV_SHORT, 0);
+
+ /* Go back to looking at the microphone */
+ snd_soc_update_bits(codec, WM8996_ACCESSORY_DETECT_MODE_1,
+ WM8996_JD_MODE_MASK, 0);
+ snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, WM8996_MICD_ENA,
+ WM8996_MICD_ENA);
+
+ snd_soc_dapm_disable_pin(&codec->dapm, "Bandgap");
+ snd_soc_dapm_sync(&codec->dapm);
+}
+
+static void wm8996_hpdet_start(struct snd_soc_codec *codec)
+{
+ /* Unclamp the output, we can't measure while we're shorting it */
+ snd_soc_update_bits(codec, WM8996_ANALOGUE_HP_1,
+ WM8996_HPOUT1L_RMV_SHORT |
+ WM8996_HPOUT1R_RMV_SHORT,
+ WM8996_HPOUT1L_RMV_SHORT |
+ WM8996_HPOUT1R_RMV_SHORT);
+
+ /* We need bandgap for HPDET */
+ snd_soc_dapm_force_enable_pin(&codec->dapm, "Bandgap");
+ snd_soc_dapm_sync(&codec->dapm);
+
+ /* Go into headphone detect left mode */
+ snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, WM8996_MICD_ENA, 0);
+ snd_soc_update_bits(codec, WM8996_ACCESSORY_DETECT_MODE_1,
+ WM8996_JD_MODE_MASK, 1);
+
+ /* Trigger a measurement */
+ snd_soc_update_bits(codec, WM8996_HEADPHONE_DETECT_1,
+ WM8996_HP_POLL, WM8996_HP_POLL);
+}
+
static void wm8996_micd(struct snd_soc_codec *codec)
{
struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
wm8996->jack_mic = false;
wm8996->detecting = true;
snd_soc_jack_report(wm8996->jack, 0,
- SND_JACK_HEADSET | SND_JACK_BTN_0);
+ SND_JACK_LINEOUT | SND_JACK_HEADSET |
+ SND_JACK_BTN_0);
+
snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
WM8996_MICD_RATE_MASK,
WM8996_MICD_RATE_MASK);
return;
}
- /* If the measurement is very high we've got a microphone but
- * do a little debounce to account for mechanical issues.
+ /* If the measurement is very high we've got a microphone,
+ * either we just detected one or if we already reported then
+ * we've got a button release event.
*/
if (val & 0x400) {
- dev_dbg(codec->dev, "Microphone detected\n");
- snd_soc_jack_report(wm8996->jack, SND_JACK_HEADSET,
- SND_JACK_HEADSET | SND_JACK_BTN_0);
- wm8996->jack_mic = true;
- wm8996->detecting = false;
-
- /* Increase poll rate to give better responsiveness
- * for buttons */
- snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
- WM8996_MICD_RATE_MASK,
- 5 << WM8996_MICD_RATE_SHIFT);
+ if (wm8996->detecting) {
+ dev_dbg(codec->dev, "Microphone detected\n");
+ wm8996->jack_mic = true;
+ wm8996_hpdet_start(codec);
+
+ /* Increase poll rate to give better responsiveness
+ * for buttons */
+ snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
+ WM8996_MICD_RATE_MASK,
+ 5 << WM8996_MICD_RATE_SHIFT);
+ } else {
+ dev_dbg(codec->dev, "Mic button up\n");
+ snd_soc_jack_report(wm8996->jack, 0, SND_JACK_BTN_0);
+ }
+
+ return;
}
/* If we detected a lower impedence during initial startup
if (val & 0x3fc) {
if (wm8996->jack_mic) {
dev_dbg(codec->dev, "Mic button detected\n");
- snd_soc_jack_report(wm8996->jack,
- SND_JACK_HEADSET | SND_JACK_BTN_0,
- SND_JACK_HEADSET | SND_JACK_BTN_0);
- } else {
- dev_dbg(codec->dev, "Headphone detected\n");
- snd_soc_jack_report(wm8996->jack,
- SND_JACK_HEADPHONE,
- SND_JACK_HEADSET |
+ snd_soc_jack_report(wm8996->jack, SND_JACK_BTN_0,
SND_JACK_BTN_0);
+ } else if (wm8996->detecting) {
+ dev_dbg(codec->dev, "Headphone detected\n");
+ wm8996_hpdet_start(codec);
/* Increase the detection rate a bit for
* responsiveness.
snd_soc_update_bits(codec, WM8996_MIC_DETECT_1,
WM8996_MICD_RATE_MASK,
7 << WM8996_MICD_RATE_SHIFT);
-
- wm8996->detecting = false;
}
}
}
}
irq_val &= ~snd_soc_read(codec, WM8996_INTERRUPT_STATUS_2_MASK);
+ if (!irq_val)
+ return IRQ_NONE;
+
snd_soc_write(codec, WM8996_INTERRUPT_STATUS_2, irq_val);
if (irq_val & (WM8996_DCS_DONE_01_EINT | WM8996_DCS_DONE_23_EINT)) {
if (irq_val & WM8996_MICD_EINT)
wm8996_micd(codec);
- if (irq_val)
- return IRQ_HANDLED;
- else
- return IRQ_NONE;
+ if (irq_val & WM8996_HP_DONE_EINT)
+ wm8996_hpdet_irq(codec);
+
+ return IRQ_HANDLED;
}
static irqreturn_t wm8996_edge_irq(int irq, void *data)
wm8996->disable_nb[0].notifier_call = wm8996_regulator_event_0;
wm8996->disable_nb[1].notifier_call = wm8996_regulator_event_1;
wm8996->disable_nb[2].notifier_call = wm8996_regulator_event_2;
- wm8996->disable_nb[3].notifier_call = wm8996_regulator_event_3;
+
+ wm8996->cpvdd = regulator_get(&i2c->dev, "CPVDD");
+ if (IS_ERR(wm8996->cpvdd)) {
+ ret = PTR_ERR(wm8996->cpvdd);
+ dev_err(&i2c->dev, "Failed to get CPVDD: %d\n", ret);
+ goto err_get;
+ }
/* This should really be moved into the regulator core */
for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++) {
wm8996->supplies);
if (ret != 0) {
dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
- goto err_get;
+ goto err_cpvdd;
}
if (wm8996->pdata.ldo_ena >= 0) {
gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0);
regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
+err_cpvdd:
+ regulator_put(wm8996->cpvdd);
err_get:
regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
err:
for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
regulator_unregister_notifier(wm8996->supplies[i].consumer,
&wm8996->disable_nb[i]);
+ regulator_put(wm8996->cpvdd);
regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
return 0;
projects / ~andy / linux / blobdiff