/*
* pop3.c -- POP3 protocol methods
*
+ * Copyright 1998 by Eric S. Raymond.
* For license terms, see the file COPYING in this directory.
*/
#include "config.h"
-
+#ifdef POP3_ENABLE
#include <stdio.h>
#include <string.h>
#include <ctype.h>
#include "fetchmail.h"
#include "socket.h"
+#include "i18n.h"
-#if HAVE_LIBOPIE
-#include <opie.h>
-#endif /* HAVE_LIBOPIE */
-
-#define PROTOCOL_ERROR {error(0, 0, "protocol error"); return(PS_ERROR);}
+#if OPIE_ENABLE
+#include <opie.h>
+#endif /* OPIE_ENABLE */
+#ifndef strstr /* glibc-2.1 declares this as a macro */
extern char *strstr(); /* needed on sysV68 R3V7.1. */
+#endif /* strstr */
static int last;
+#ifdef SDPS_ENABLE
+char *sdps_envfrom;
+char *sdps_envto;
+#endif /* SDPS_ENABLE */
-#if HAVE_LIBOPIE
+#if OPIE_ENABLE
static char lastok[POPBUFSIZE+1];
-#endif /* HAVE_LIBOPIE */
+#endif /* OPIE_ENABLE */
int pop3_ok (int sock, char *argbuf)
/* parse command response */
if (strcmp(buf,"+OK") == 0)
{
-#if HAVE_LIBOPIE
+#if OPIE_ENABLE
strcpy(lastok, bufp);
-#endif /* HAVE_LIBOPIE */
+#endif /* OPIE_ENABLE */
ok = 0;
}
- else if (strcmp(buf,"-ERR") == 0)
+ else if (strncmp(buf,"-ERR", 4) == 0)
{
+ if (stage > STAGE_GETAUTH)
+ ok = PS_PROTOCOL;
/*
* We're checking for "lock busy", "unable to lock",
- * "already locked" etc. here. This indicates that we
- * have to wait for the server to clean up before we
- * can poll again.
+ * "already locked", "wait a few minutes" etc. here.
+ * This indicates that we have to wait for the server to
+ * unwedge itself before we can poll again.
*
* PS_LOCKBUSY check empirically verified with two recent
- * versions the Berkeley popper; QPOP (version 2.2) and
+ * versions of the Berkeley popper; QPOP (version 2.2) and
* QUALCOMM Pop server derived from UCB (version 2.1.4-R3)
+ * These are caught by the case-indifferent "lock" check.
+ * The "wait" catches "mail storage services unavailable,
+ * wait a few minutes and try again" on the InterMail server.
+ *
+ * If these aren't picked up on correctly, fetchmail will
+ * think there is an authentication failure and wedge the
+ * connection in order to prevent futile polls.
+ *
+ * Gad, what a kluge.
*/
- if (strstr(bufp,"lock")||strstr(bufp,"Lock")||strstr(bufp,"LOCK"))
+ else if (strstr(bufp,"lock")
+ || strstr(bufp,"Lock")
+ || strstr(bufp,"LOCK")
+ || strstr(bufp,"wait")
+ /* these are blessed by RFC 2449 */
+ || strstr(bufp,"[IN-USE]")||strstr(bufp,"[LOGIN-DELAY]"))
ok = PS_LOCKBUSY;
else
ok = PS_AUTHFAIL;
if (*bufp)
- error(0,0,bufp);
+ report(stderr, "%s\n", bufp);
}
else
ok = PS_PROTOCOL;
int ok;
char *start,*end;
char *msg;
-#if HAVE_LIBOPIE
+#if OPIE_ENABLE
char *challenge;
-#endif /* HAVE_LIBOPIE */
+#endif /* OPIE_ENABLE */
+
+#ifdef SDPS_ENABLE
+ /*
+ * This needs to catch both demon.co.uk and demon.net.
+ * If we see either, and we're in multidrop mode, try to use
+ * the SDPS *ENV extension.
+ */
+ if (!(ctl->server.sdps) && MULTIDROP(ctl) && strstr(greeting, "demon."))
+ ctl->server.sdps = TRUE;
+#endif /* SDPS_ENABLE */
+
+ /*
+ * In theory, we ought to probe with CAPA here (RFC 2449).
+ * But AFAIK this commpand is not widely implemented, and
+ * we have our own tests for optional commands, and it seems
+ * vanishingly unlikely that the RFC 2449 extended responses
+ * [IN-USE] and [LOGIN-DELAY] will ever be accidentally spoofed.
+ * So we'll not bother, and save ourselves the overhead.
+ */
switch (ctl->server.protocol) {
case P_POP3:
- if ((gen_transact(sock, "USER %s", ctl->remotename)) != 0)
- PROTOCOL_ERROR
-
-#if defined(HAVE_LIBOPIE) && defined(OPIE_ENABLE)
- /* see RFC1938: A One-Time Password System */
- if (challenge = strstr(lastok, "otp-"))
+#ifdef RPA_ENABLE
+ /* CompuServe POP3 Servers as of 990730 want AUTH first for RPA */
+ if (strstr(ctl->remotename, "@compuserve.com"))
{
- char response[OPIE_RESPONSE_MAX+1];
+ /* AUTH command should return a list of available mechanisms */
+ if (gen_transact(sock, "AUTH") == 0)
+ {
+ char buffer[10];
+ flag has_rpa = FALSE;
- if (opiegenerator(challenge, ctl->password, response))
- PROTOCOL_ERROR
+ while ((ok = gen_recv(sock, buffer, sizeof(buffer))) == 0)
+ {
+ if (buffer[0] == '.')
+ break;
+ if (strncasecmp(buffer, "rpa", 3) == 0)
+ has_rpa = TRUE;
+ }
+ if (has_rpa && !POP3_auth_rpa(ctl->remotename,
+ ctl->password, sock))
+ return(PS_SUCCESS);
+ }
- ok = gen_transact(sock, "PASS %s", response);
+ return(PS_AUTHFAIL);
}
- else
-#endif /* defined(HAVE_LIBOPIE) && defined(OPIE_ENABLE) */
- /* ordinary validation, no one-time password */
- ok = gen_transact(sock, "PASS %s", ctl->password);
+ else /* not a CompuServe account */
+#endif /* RPA_ENABLE */
+ ok = gen_transact(sock, "USER %s", ctl->remotename);
+
+#if OPIE_ENABLE
+ /* see RFC1938: A One-Time Password System */
+ if (challenge = strstr(lastok, "otp-")) {
+ char response[OPIE_RESPONSE_MAX+1];
+ int i;
+
+ i = opiegenerator(challenge, !strcmp(ctl->password, "opie") ? "" : ctl->password, response);
+ if ((i == -2) && !run.poll_interval) {
+ char secret[OPIE_SECRET_MAX+1];
+ fprintf(stderr, _("Secret pass phrase: "));
+ if (opiereadpass(secret, sizeof(secret), 0))
+ i = opiegenerator(challenge, secret, response);
+ memset(secret, 0, sizeof(secret));
+ };
+
+ if (i) {
+ ok = PS_ERROR;
+ break;
+ };
+
+ ok = gen_transact(sock, "PASS %s", response);
+ break;
+ }
+#endif /* OPIE_ENABLE */
+
+ /* ordinary validation, no one-time password or RPA */
+ ok = gen_transact(sock, "PASS %s", ctl->password);
break;
case P_APOP:
for (start = greeting; *start != 0 && *start != '<'; start++)
continue;
if (*start == 0) {
- error(0, -1, "Required APOP timestamp not found in greeting");
+ report(stderr,
+ _("Required APOP timestamp not found in greeting\n"));
return(PS_AUTHFAIL);
}
for (end = start; *end != 0 && *end != '>'; end++)
continue;
if (*end == 0 || end == start + 1) {
- error(0, -1, "Timestamp syntax error in greeting");
+ report(stderr,
+ _("Timestamp syntax error in greeting\n"));
return(PS_AUTHFAIL);
}
else
*++end = '\0';
/* copy timestamp and password into digestion buffer */
- msg = (char *)xmalloc((end-start+1) + strlen(ctl->password) + 1);
+ xalloca(msg, char *, (end-start+1) + strlen(ctl->password) + 1);
strcpy(msg,start);
strcat(msg,ctl->password);
- strcpy(ctl->digest, MD5Digest(msg));
- free(msg);
+ strcpy(ctl->digest, MD5Digest((unsigned char *)msg));
ok = gen_transact(sock, "APOP %s %s", ctl->remotename, ctl->digest);
break;
case P_RPOP:
- if ((gen_transact(sock,"USER %s", ctl->remotename)) != 0)
- PROTOCOL_ERROR
-
- ok = gen_transact(sock, "RPOP %s", ctl->password);
+ if ((ok = gen_transact(sock,"USER %s", ctl->remotename)) == 0)
+ ok = gen_transact(sock, "RPOP %s", ctl->password);
break;
default:
- error(0, 0, "Undefined protocol request in POP3_auth");
+ report(stderr, _("Undefined protocol request in POP3_auth\n"));
ok = PS_ERROR;
}
- /* maybe we detected a lock-busy condition? */
if (ok != 0)
{
+ /* maybe we detected a lock-busy condition? */
if (ok == PS_LOCKBUSY)
- {
- error(0, 0, "lock busy! Is another session active?");
- return(PS_LOCKBUSY);
- }
- PROTOCOL_ERROR
+ report(stderr, _("lock busy! Is another session active?\n"));
+
+ return(ok);
}
/*
*/
sleep(3); /* to be _really_ safe, probably need sleep(5)! */
+ /* we're peek-capable if use of TOP is enabled */
+ peek_capable = !(ctl->fetchall || ctl->keep);
+
/* we're approved */
- return(0);
+ return(PS_SUCCESS);
}
static int
break;
if( ! got_it && ! strncasecmp("Message-Id:", buf, 11 )) {
got_it = 1;
+ /* prevent stack overflows */
+ buf[IDLEN+12] = 0;
sscanf( buf+12, "%s", id);
}
}
* + Otherwise run a binary search to determine the last known message
*/
int ok, nolinear = 0;
- int first_nr, list_len, try_id, try_nr, hop_id, add_id;
+ int first_nr, list_len, try_id, try_nr, add_id;
int num;
char id [IDLEN+1];
if( (ok = pop3_gettopid( sock, try_id, id )) != 0 )
return ok;
- try_nr = str_nr_in_list(&ctl->oldsaved, id);
+ try_nr = str_nr_last_in_list(&ctl->oldsaved, id);
} else {
try_id = *countp+1;
try_nr = -1;
try_id--;
}
} else {
- error(0,0,"Messages inserted into list on server. "
- "Cannot handle this.");
+ report(stderr,
+ _("Messages inserted into list on server. Cannot handle this.\n"));
return -1;
}
}
}
- /* The first try_id messages are known -> copy them to
- the newsaved list */
+ /* the first try_id messages are known -> copy them to the newsaved list */
for( num = first_nr; num < list_len; num++ )
- save_str(&ctl->newsaved, num-first_nr + 1,
- str_from_nr_list( &ctl->oldsaved, num ));
+ {
+ struct idlist *new = save_str(&ctl->newsaved,
+ str_from_nr_list(&ctl->oldsaved, num),
+ UID_UNSEEN);
+ new->val.status.num = num - first_nr + 1;
+ }
if( nolinear ) {
free_str_list(&ctl->oldsaved);
static int pop3_getrange(int sock,
struct query *ctl,
const char *folder,
- int *countp, int *newp)
+ int *countp, int *newp, int *bytes)
/* get range of messages to be fetched */
{
int ok;
gen_send(sock, "STAT");
ok = pop3_ok(sock, buf);
if (ok == 0)
- sscanf(buf,"%d %*d", countp);
+ sscanf(buf,"%d %d", countp, bytes);
else
return(ok);
if (ok == 0)
{
if (sscanf(buf, "%d", &last) == 0)
- PROTOCOL_ERROR
+ {
+ report(stderr, _("protocol error\n"));
+ return(PS_ERROR);
+ }
*newp = (*countp - last);
}
else
{
/* don't worry, yet! do it the slow way */
if((ok = pop3_slowuidl( sock, ctl, countp, newp))!=0)
- PROTOCOL_ERROR
+ {
+ report(stderr, _("protocol error while fetching UIDLs\n"));
+ return(PS_ERROR);
+ }
}
else
{
break;
else if (sscanf(buf, "%d %s", &num, id) == 2)
{
- save_str(&ctl->newsaved, num, id);
+ struct idlist *new;
+
+ new = save_str(&ctl->newsaved, id, UID_UNSEEN);
+ new->val.status.num = num;
- /* note: ID comparison is caseblind */
- if (!str_in_list(&ctl->oldsaved, id))
+ if (str_in_list(&ctl->oldsaved, id, FALSE)) {
+ new->val.status.mark = UID_SEEN;
+ str_set_mark(&ctl->oldsaved, id, UID_SEEN);
+ }
+ else
(*newp)++;
}
}
}
}
- return(0);
+ return(PS_SUCCESS);
}
static int pop3_getsizes(int sock, int count, int *sizes)
break;
else if (sscanf(buf, "%d %d", &num, &size) == 2)
sizes[num - 1] = size;
- else
- sizes[num - 1] = -1;
}
return(ok);
if (!ctl->oldsaved)
return (num <= last);
else
- /* note: ID comparison is caseblind */
return (str_in_list(&ctl->oldsaved,
- str_find (&ctl->newsaved, num)));
+ str_find(&ctl->newsaved, num), FALSE));
}
+#ifdef UNUSED
+/*
+ * We could use this to fetch headers only as we do for IMAP. The trouble
+ * is that there's no way to fetch the body only. So the following RETR
+ * would have to re-fetch the header. Enough messages have longer headers
+ * than bodies to make this a net loss.
+ */
+static int pop_fetch_headers(int sock, struct query *ctl,int number,int *lenp)
+/* request headers of nth message */
+{
+ int ok;
+ char buf[POPBUFSIZE+1];
+
+ gen_send(sock, "TOP %d 0", number);
+ if ((ok = pop3_ok(sock, buf)) != 0)
+ return(ok);
+
+ *lenp = -1; /* we got sizes from the LIST response */
+
+ return(PS_SUCCESS);
+}
+#endif /* UNUSED */
+
static int pop3_fetch(int sock, struct query *ctl, int number, int *lenp)
/* request nth message */
{
int ok;
- char buf [POPBUFSIZE+1], *cp;
+ char buf[POPBUFSIZE+1];
- gen_send(sock, "RETR %d", number);
+#ifdef SDPS_ENABLE
+ /*
+ * See http://www.demon.net/services/mail/sdps-tech.html
+ * for a description of what we're parsing here.
+ */
+ if (ctl->server.sdps)
+ {
+ int linecount = 0;
+
+ sdps_envfrom = (char *)NULL;
+ sdps_envto = (char *)NULL;
+ gen_send(sock, "*ENV %d", number);
+ do {
+ if (gen_recv(sock, buf, sizeof(buf)))
+ {
+ break;
+ }
+ linecount++;
+ switch (linecount) {
+ case 4:
+ /* No need to wrap envelope from address */
+ sdps_envfrom = xmalloc(strlen(buf)+1);
+ strcpy(sdps_envfrom,buf);
+ break;
+ case 5:
+ /* Wrap address with To: <> so nxtaddr() likes it */
+ sdps_envto = xmalloc(strlen(buf)+7);
+ sprintf(sdps_envto,"To: <%s>",buf);
+ break;
+ }
+ } while
+ (!(buf[0] == '.' && (buf[1] == '\r' || buf[1] == '\n' || buf[1] == '\0')));
+ }
+#endif /* SDPS_ENABLE */
+
+ /*
+ * Though the POP RFCs don't document this fact, on almost every
+ * POP3 server I know of messages are marked "seen" only at the
+ * time the OK response to a RETR is issued.
+ *
+ * This means we can use TOP to fetch the message without setting its
+ * seen flag. This is good! It means that if the protocol exchange
+ * craps out during the message, it will still be marked `unseen' on
+ * the server. (Exception: in early 1999 SpryNet's POP3 servers were
+ * reported to mark messages seen on a TOP fetch.)
+ *
+ * However...*don't* do this if we're using keep to suppress deletion!
+ * In that case, marking the seen flag is the only way to prevent the
+ * message from being re-fetched on subsequent runs.
+ *
+ * Also use RETR if fetchall is on. This gives us a workaround
+ * for servers like usa.net's that bungle TOP. It's pretty
+ * harmless because fetchall guarantees that any message dropped
+ * by an interrupted RETR will be picked up on the next poll of the
+ * site.
+ *
+ * We take advantage here of the fact that, according to all the
+ * POP RFCs, "if the number of lines requested by the POP3 client
+ * is greater than than the number of lines in the body, then the
+ * POP3 server sends the entire message.").
+ *
+ * The line count passed (99999999) is the maximum value CompuServe will
+ * accept; it's much lower than the natural value 2147483646 (the maximum
+ * twos-complement signed 32-bit integer minus 1) */
+ if (ctl->keep || ctl->fetchall)
+ gen_send(sock, "RETR %d", number);
+ else
+ gen_send(sock, "TOP %d 99999999", number);
if ((ok = pop3_ok(sock, buf)) != 0)
return(ok);
*lenp = -1; /* we got sizes from the LIST response */
- return(0);
+ return(PS_SUCCESS);
}
static int pop3_delete(int sock, struct query *ctl, int number)
static int pop3_logout(int sock, struct query *ctl)
/* send logout command */
{
- return(gen_transact(sock, "QUIT"));
+ int ok;
+
+ ok = gen_transact(sock, "QUIT");
+ if (!ok)
+ expunge_uids(ctl);
+
+ return(ok);
}
const static struct method pop3 =
{
"POP3", /* Post Office Protocol v3 */
+#if INET6_ENABLE
+ "pop3", /* standard POP3 port */
+ "pop3s", /* ssl POP3 port */
+#else /* INET6_ENABLE */
110, /* standard POP3 port */
+ 995, /* ssl POP3 port */
+#endif /* INET6_ENABLE */
FALSE, /* this is not a tagged protocol */
TRUE, /* this uses a message delimiter */
pop3_ok, /* parse command response */
+ NULL, /* no password canonicalization */
pop3_getauth, /* get authorization */
pop3_getrange, /* query range of messages */
pop3_getsizes, /* we can get a list of sizes */
{
#ifndef MBOX
if (ctl->mailboxes->id) {
- fprintf(stderr,"Option --remote is not supported with POP3\n");
+ fprintf(stderr,_("Option --remote is not supported with POP3\n"));
return(PS_SYNTAX);
}
#endif /* MBOX */
- peek_capable = FALSE;
+ peek_capable = !ctl->fetchall;
return(do_protocol(ctl, &pop3));
}
+#endif /* POP3_ENABLE */
/* pop3.c ends here */
projects / ~andy / fetchmail / blobdiff