/*
* pop3.c -- POP3 protocol methods
*
+ * Copyright 1998 by Eric S. Raymond.
* For license terms, see the file COPYING in this directory.
*/
#include "fetchmail.h"
#include "socket.h"
+#include "i18n.h"
-#if OPIE
+#if OPIE_ENABLE
#include <opie.h>
-#endif /* OPIE */
+#endif /* OPIE_ENABLE */
#ifndef strstr /* glibc-2.1 declares this as a macro */
extern char *strstr(); /* needed on sysV68 R3V7.1. */
#endif /* strstr */
-static int phase;
-#define PHASE_GETAUTH 0
-#define PHASE_GETRANGE 1
-#define PHASE_GETSIZES 2
-#define PHASE_FETCH 3
-#define PHASE_LOGOUT 4
static int last;
+#ifdef SDPS_ENABLE
+char *sdps_envfrom;
+char *sdps_envto;
+#endif /* SDPS_ENABLE */
-#if OPIE
+#if OPIE_ENABLE
static char lastok[POPBUFSIZE+1];
-#endif /* OPIE */
-
-int pop3_ok (int sock, char *argbuf)
+#endif /* OPIE_ENABLE */
+
+/* these variables are shared between the CAPA probe and the authenticator */
+#if defined(GSSAPI)
+ flag has_gssapi = FALSE;
+#endif /* defined(GSSAPI) */
+#if defined(KERBEROS_V4) || defined(KERBEROS_V5)
+ flag has_kerberos = FALSE;
+#endif /* defined(KERBEROS_V4) || defined(KERBEROS_V5) */
+ flag has_cram = FALSE;
+#ifdef OPIE_ENABLE
+ flag has_otp = FALSE;
+#endif /* OPIE_ENABLE */
+#ifdef SSL_ENABLE
+ flag has_ssl = FALSE;
+#endif /* SSL_ENABLE */
+
+#define DOTLINE(s) (s[0] == '.' && (s[1]=='\r'||s[1]=='\n'||s[1]=='\0'))
+
+static int pop3_ok (int sock, char *argbuf)
/* parse command response */
{
int ok;
char *bufp;
if ((ok = gen_recv(sock, buf, sizeof(buf))) == 0)
- {
- bufp = buf;
+ { bufp = buf;
if (*bufp == '+' || *bufp == '-')
bufp++;
else
if (strcmp(buf,"+OK") == 0)
{
-#if OPIE
+#if OPIE_ENABLE
strcpy(lastok, bufp);
-#endif /* OPIE */
+#endif /* OPIE_ENABLE */
ok = 0;
}
- else if (strcmp(buf,"-ERR") == 0)
+ else if (strncmp(buf,"-ERR", 4) == 0)
{
- if (phase > PHASE_GETAUTH)
+ if (stage == STAGE_FETCH)
+ ok = PS_TRANSIENT;
+ else if (stage > STAGE_GETAUTH)
ok = PS_PROTOCOL;
/*
* We're checking for "lock busy", "unable to lock",
- * "already locked" etc. here. This indicates that we
- * have to wait for the server to clean up before we
- * can poll again.
+ * "already locked", "wait a few minutes" etc. here.
+ * This indicates that we have to wait for the server to
+ * unwedge itself before we can poll again.
*
* PS_LOCKBUSY check empirically verified with two recent
- * versions the Berkeley popper; QPOP (version 2.2) and
+ * versions of the Berkeley popper; QPOP (version 2.2) and
* QUALCOMM Pop server derived from UCB (version 2.1.4-R3)
+ * These are caught by the case-indifferent "lock" check.
+ * The "wait" catches "mail storage services unavailable,
+ * wait a few minutes and try again" on the InterMail server.
+ *
+ * If these aren't picked up on correctly, fetchmail will
+ * think there is an authentication failure and wedge the
+ * connection in order to prevent futile polls.
+ *
+ * Gad, what a kluge.
*/
- else if (strstr(bufp,"lock")||strstr(bufp,"Lock")||strstr(bufp,"LOCK"))
+ else if (strstr(bufp,"lock")
+ || strstr(bufp,"Lock")
+ || strstr(bufp,"LOCK")
+ || strstr(bufp,"wait")
+ /* these are blessed by RFC 2449 */
+ || strstr(bufp,"[IN-USE]")||strstr(bufp,"[LOGIN-DELAY]"))
ok = PS_LOCKBUSY;
+ else if ((strstr(bufp,"Service")
+ || strstr(bufp,"service"))
+ && (strstr(bufp,"unavailable")))
+ ok = PS_SERVBUSY;
else
ok = PS_AUTHFAIL;
- if (*bufp)
- error(0,0,bufp);
+ /*
+ * We always want to pass the user lock-busy messages, because
+ * they're red flags. Other stuff (like AUTH failures on non-
+ * RFC1734 servers) only if we're debugging.
+ */
+ if (*bufp && (ok == PS_LOCKBUSY || outlevel >= O_MONITOR))
+ report(stderr, "%s\n", bufp);
}
else
ok = PS_PROTOCOL;
return(ok);
}
-int pop3_getauth(int sock, struct query *ctl, char *greeting)
+
+
+static int capa_probe(sock)
+/* probe the capabilities of the remote server */
+{
+ int ok;
+
+ ok = gen_transact(sock, "CAPA");
+ if (ok == PS_SUCCESS)
+ {
+ char buffer[64];
+
+ /* determine what authentication methods we have available */
+ while ((ok = gen_recv(sock, buffer, sizeof(buffer))) == 0)
+ {
+ if (DOTLINE(buffer))
+ break;
+#ifdef SSL_ENABLE
+ if (strstr(buffer, "STLS"))
+ has_ssl = TRUE;
+#endif /* SSL_ENABLE */
+#if defined(GSSAPI)
+ if (strstr(buffer, "GSSAPI"))
+ has_gssapi = TRUE;
+#endif /* defined(GSSAPI) */
+#if defined(KERBEROS_V4)
+ if (strstr(buffer, "KERBEROS_V4"))
+ has_kerberos = TRUE;
+#endif /* defined(KERBEROS_V4) */
+#ifdef OPIE_ENABLE
+ if (strstr(buffer, "X-OTP"))
+ has_otp = TRUE;
+#endif /* OPIE_ENABLE */
+ if (strstr(buffer, "CRAM-MD5"))
+ has_cram = TRUE;
+ }
+ }
+ return(ok);
+}
+
+static int pop3_getauth(int sock, struct query *ctl, char *greeting)
/* apply for connection authorization */
{
int ok;
char *start,*end;
char *msg;
-#if OPIE
+#if OPIE_ENABLE
char *challenge;
-#endif /* OPIE */
+#endif /* OPIE_ENABLE */
+#ifdef SSL_ENABLE
+ flag did_stls = FALSE;
+#endif /* SSL_ENABLE */
+
+ if (ctl->server.authenticate == A_SSH) {
+ return PS_SUCCESS;
+ }
- phase = PHASE_GETAUTH;
+#ifdef SDPS_ENABLE
+ /*
+ * This needs to catch both demon.co.uk and demon.net.
+ * If we see either, and we're in multidrop mode, try to use
+ * the SDPS *ENV extension.
+ */
+ if (!(ctl->server.sdps) && MULTIDROP(ctl) && strstr(greeting, "demon."))
+ ctl->server.sdps = TRUE;
+#endif /* SDPS_ENABLE */
switch (ctl->server.protocol) {
case P_POP3:
- ok = gen_transact(sock, "USER %s", ctl->remotename);
-
#ifdef RPA_ENABLE
- /*
- * CompuServe has changed its RPA behavior. Used to be they didn't
- * accept PASS, but I'm told this changed in mid-November 1997.
- */
- if (strstr(greeting, "csi.com"))
- {
- /* temporary fix to get back out of cleartext authentication */
- gen_transact(sock, "PASS %s", "dummypass");
-
- /* AUTH command should return a list of available mechanisms */
- if (gen_transact(sock, "AUTH") == 0)
- {
- char buffer[10];
- flag has_rpa = FALSE;
-
- while ((ok = gen_recv(sock, buffer, sizeof(buffer))) == 0)
- {
- if (buffer[0] == '.')
- break;
- if (strncasecmp(buffer, "rpa", 3) == 0)
- has_rpa = TRUE;
- }
- if (has_rpa && !POP3_auth_rpa(ctl->remotename,
- ctl->password, sock))
- return(PS_SUCCESS);
- }
-
- return(PS_AUTHFAIL);
- }
+ /* CompuServe POP3 Servers as of 990730 want AUTH first for RPA */
+ if (strstr(ctl->remotename, "@compuserve.com"))
+ {
+ /* AUTH command should return a list of available mechanisms */
+ if (gen_transact(sock, "AUTH") == 0)
+ {
+ char buffer[10];
+ flag has_rpa = FALSE;
+
+ while ((ok = gen_recv(sock, buffer, sizeof(buffer))) == 0)
+ {
+ if (DOTLINE(buffer))
+ break;
+ if (strncasecmp(buffer, "rpa", 3) == 0)
+ has_rpa = TRUE;
+ }
+ if (has_rpa && !POP3_auth_rpa(ctl->remotename,
+ ctl->password, sock))
+ return(PS_SUCCESS);
+ }
+
+ return(PS_AUTHFAIL);
+ }
#endif /* RPA_ENABLE */
-#if OPIE
+ /*
+ * CAPA command may return a list including available
+ * authentication mechanisms. if it doesn't, no harm done, we
+ * just fall back to a plain login. Note that this code
+ * latches the server's authentication type, so that in daemon mode
+ * the CAPA check only needs to be done once at start of run.
+ *
+ * If CAPA fails, then force the authentication method to PASSORD
+ * and repoll immediately.
+ *
+ * These authentication methods are blessed by RFC1734,
+ * describing the POP3 AUTHentication command.
+ */
+ if (ctl->server.authenticate == A_ANY)
+ {
+ if (capa_probe(sock) != PS_SUCCESS)
+ /* we are in STAGE_GETAUTH! */
+ if (ok == PS_AUTHFAIL ||
+ /* Some servers directly close the socket. However, if we
+ * have already authenticated before, then a previous CAPA
+ * must have succeeded. In that case, treat this as a
+ * genuine socket error and do not change the auth method.
+ */
+ (ok == PS_SOCKET && !ctl->wehaveauthed))
+ {
+ ctl->server.authenticate = A_PASSWORD;
+ /* repoll immediately */
+ ok = PS_REPOLL;
+ break;
+ }
+ }
+
+#ifdef SSL_ENABLE
+ if (has_ssl
+ && !ctl->use_ssl
+ && (!ctl->sslproto || !strcmp(ctl->sslproto,"tls1")))
+ {
+ char *realhost;
+
+ realhost = ctl->server.via ? ctl->server.via : ctl->server.pollname;
+ ok = gen_transact(sock, "STLS");
+
+ /* We use "tls1" instead of ctl->sslproto, as we want STLS,
+ * not other SSL protocols
+ */
+ if (ok == PS_SUCCESS &&
+ SSLOpen(sock,ctl->sslcert,ctl->sslkey,"tls1",ctl->sslcertck, ctl->sslcertpath,ctl->sslfingerprint,realhost,ctl->server.pollname) == -1)
+ {
+ if (!ctl->sslproto && !ctl->wehaveauthed)
+ {
+ ctl->sslproto = xstrdup("");
+ /* repoll immediately */
+ return(PS_REPOLL);
+ }
+ report(stderr,
+ GT_("SSL connection failed.\n"));
+ return(PS_AUTHFAIL);
+ }
+ did_stls = TRUE;
+
+ /*
+ * RFC 2595 says this:
+ *
+ * "Once TLS has been started, the client MUST discard cached
+ * information about server capabilities and SHOULD re-issue the
+ * CAPABILITY command. This is necessary to protect against
+ * man-in-the-middle attacks which alter the capabilities list prior
+ * to STARTTLS. The server MAY advertise different capabilities
+ * after STARTTLS."
+ */
+ capa_probe(sock);
+ }
+#endif /* SSL_ENABLE */
+
+ /*
+ * OK, we have an authentication type now.
+ */
+#if defined(KERBEROS_V4)
+ /*
+ * Servers doing KPOP have to go through a dummy login sequence
+ * rather than doing SASL.
+ */
+ if (has_kerberos &&
+#if INET6_ENABLE
+ ctl->server.service && (strcmp(ctl->server.service, KPOP_PORT)!=0)
+#else /* INET6_ENABLE */
+ ctl->server.port != KPOP_PORT
+#endif /* INET6_ENABLE */
+ && (ctl->server.authenticate == A_KERBEROS_V4
+ || ctl->server.authenticate == A_KERBEROS_V5
+ || ctl->server.authenticate == A_ANY))
+ {
+ ok = do_rfc1731(sock, "AUTH", ctl->server.truename);
+ if (ok == PS_SUCCESS || ctl->server.authenticate != A_ANY)
+ break;
+ }
+#endif /* defined(KERBEROS_V4) || defined(KERBEROS_V5) */
+
+#if defined(GSSAPI)
+ if (has_gssapi &&
+ (ctl->server.authenticate == A_GSSAPI ||
+ ctl->server.authenticate == A_ANY))
+ {
+ ok = do_gssauth(sock,"AUTH",ctl->server.truename,ctl->remotename);
+ if (ok == PS_SUCCESS || ctl->server.authenticate != A_ANY)
+ break;
+ }
+#endif /* defined(GSSAPI) */
+
+#ifdef OPIE_ENABLE
+ if (has_otp &&
+ (ctl->server.authenticate == A_OTP ||
+ ctl->server.authenticate == A_ANY))
+ {
+ ok = do_otp(sock, "AUTH", ctl);
+ if (ok == PS_SUCCESS || ctl->server.authenticate != A_ANY)
+ break;
+ }
+#endif /* OPIE_ENABLE */
+
+ if (has_cram &&
+ (ctl->server.authenticate == A_CRAM_MD5 ||
+ ctl->server.authenticate == A_ANY))
+ {
+ ok = do_cram_md5(sock, "AUTH", ctl, NULL);
+ if (ok == PS_SUCCESS || ctl->server.authenticate != A_ANY)
+ break;
+ }
+
+ /* ordinary validation, no one-time password or RPA */
+ gen_transact(sock, "USER %s", ctl->remotename);
+
+#if OPIE_ENABLE
/* see RFC1938: A One-Time Password System */
if (challenge = strstr(lastok, "otp-")) {
char response[OPIE_RESPONSE_MAX+1];
int i;
i = opiegenerator(challenge, !strcmp(ctl->password, "opie") ? "" : ctl->password, response);
- if ((i == -2) && (cmd_daemon == -1)) {
+ if ((i == -2) && !run.poll_interval) {
char secret[OPIE_SECRET_MAX+1];
- fprintf(stderr, "Secret pass phrase: ");
+ fprintf(stderr, GT_("Secret pass phrase: "));
if (opiereadpass(secret, sizeof(secret), 0))
i = opiegenerator(challenge, secret, response);
memset(secret, 0, sizeof(secret));
ok = gen_transact(sock, "PASS %s", response);
break;
}
-#endif /* OPIE */
+#endif /* OPIE_ENABLE */
- /* ordinary validation, no one-time password or RPA */
+ strcpy(shroud, ctl->password);
ok = gen_transact(sock, "PASS %s", ctl->password);
+ shroud[0] = '\0';
+#ifdef SSL_ENABLE
+ /* this is for servers which claim to support TLS, but actually
+ * don't! */
+ if (did_stls && ok == PS_SOCKET && !ctl->sslproto && !ctl->wehaveauthed)
+ {
+ ctl->sslproto = xstrdup("");
+ /* repoll immediately */
+ ok = PS_REPOLL;
+ }
+#endif
break;
case P_APOP:
for (start = greeting; *start != 0 && *start != '<'; start++)
continue;
if (*start == 0) {
- error(0, -1, "Required APOP timestamp not found in greeting");
+ report(stderr,
+ GT_("Required APOP timestamp not found in greeting\n"));
return(PS_AUTHFAIL);
}
for (end = start; *end != 0 && *end != '>'; end++)
continue;
if (*end == 0 || end == start + 1) {
- error(0, -1, "Timestamp syntax error in greeting");
+ report(stderr,
+ GT_("Timestamp syntax error in greeting\n"));
return(PS_AUTHFAIL);
}
else
*++end = '\0';
/* copy timestamp and password into digestion buffer */
- msg = (char *)xmalloc((end-start+1) + strlen(ctl->password) + 1);
+ xalloca(msg, char *, (end-start+1) + strlen(ctl->password) + 1);
strcpy(msg,start);
strcat(msg,ctl->password);
- strcpy(ctl->digest, MD5Digest(msg));
- free(msg);
+ strcpy(ctl->digest, MD5Digest((unsigned char *)msg));
ok = gen_transact(sock, "APOP %s %s", ctl->remotename, ctl->digest);
break;
break;
default:
- error(0, 0, "Undefined protocol request in POP3_auth");
+ report(stderr, GT_("Undefined protocol request in POP3_auth\n"));
ok = PS_ERROR;
}
{
/* maybe we detected a lock-busy condition? */
if (ok == PS_LOCKBUSY)
- error(0, 0, "lock busy! Is another session active?");
+ report(stderr, GT_("lock busy! Is another session active?\n"));
return(ok);
}
*/
sleep(3); /* to be _really_ safe, probably need sleep(5)! */
+ /* we're peek-capable if use of TOP is enabled */
+ peek_capable = !(ctl->fetchall || ctl->keep);
+
/* we're approved */
return(PS_SUCCESS);
}
-static int
-pop3_gettopid( int sock, int num , char *id)
+static int pop3_gettopid( int sock, int num , char *id)
{
int ok;
int got_it;
char buf [POPBUFSIZE+1];
sprintf( buf, "TOP %d 1", num );
- if( (ok = gen_transact(sock, buf ) ) != 0 )
+ if ((ok = gen_transact(sock, buf )) != 0)
return ok;
got_it = 0;
- while((ok = gen_recv(sock, buf, sizeof(buf))) == 0) {
- if( buf[0] == '.' )
+ while ((ok = gen_recv(sock, buf, sizeof(buf))) == 0)
+ {
+ if (DOTLINE(buf))
break;
- if( ! got_it && ! strncasecmp("Message-Id:", buf, 11 )) {
+ if ( ! got_it && ! strncasecmp("Message-Id:", buf, 11 )) {
got_it = 1;
/* prevent stack overflows */
buf[IDLEN+12] = 0;
return 0;
}
-static int
-pop3_slowuidl( int sock, struct query *ctl, int *countp, int *newp)
+static int pop3_slowuidl( int sock, struct query *ctl, int *countp, int *newp)
{
/* This approach tries to get the message headers from the
* remote hosts and compares the message-id to the already known
try_id--;
}
} else {
- error(0,0,"Messages inserted into list on server. "
- "Cannot handle this.");
+ report(stderr,
+ GT_("Messages inserted into list on server. Cannot handle this.\n"));
return -1;
}
}
static int pop3_getrange(int sock,
struct query *ctl,
const char *folder,
- int *countp, int *newp)
+ int *countp, int *newp, int *bytes)
/* get range of messages to be fetched */
{
int ok;
char buf [POPBUFSIZE+1];
- phase = PHASE_GETRANGE;
-
/* Ensure that the new list is properly empty */
ctl->newsaved = (struct idlist *)NULL;
gen_send(sock, "STAT");
ok = pop3_ok(sock, buf);
if (ok == 0)
- sscanf(buf,"%d %*d", countp);
+ sscanf(buf,"%d %d", countp, bytes);
else
return(ok);
{
if (sscanf(buf, "%d", &last) == 0)
{
- error(0, 0, "protocol error");
+ report(stderr, GT_("protocol error\n"));
return(PS_ERROR);
}
*newp = (*countp - last);
/* don't worry, yet! do it the slow way */
if((ok = pop3_slowuidl( sock, ctl, countp, newp))!=0)
{
- error(0, 0, "protocol error while fetching UIDLs");
+ report(stderr, GT_("protocol error while fetching UIDLs\n"));
return(PS_ERROR);
}
}
*newp = 0;
while ((ok = gen_recv(sock, buf, sizeof(buf))) == 0)
{
- if (buf[0] == '.')
+ if (DOTLINE(buf))
break;
else if (sscanf(buf, "%d %s", &num, id) == 2)
{
new = save_str(&ctl->newsaved, id, UID_UNSEEN);
new->val.status.num = num;
- /* note: ID comparison is caseblind */
- if (str_in_list(&ctl->oldsaved, id))
+ if (str_in_list(&ctl->oldsaved, id, FALSE)) {
new->val.status.mark = UID_SEEN;
+ str_set_mark(&ctl->oldsaved, id, UID_SEEN);
+ }
else
(*newp)++;
}
}
}
- return(0);
+ return(PS_SUCCESS);
}
static int pop3_getsizes(int sock, int count, int *sizes)
{
int ok;
- /* phase = PHASE_GETSIZES */
-
if ((ok = gen_transact(sock, "LIST")) != 0)
return(ok);
else
while ((ok = gen_recv(sock, buf, sizeof(buf))) == 0)
{
- int num, size;
+ unsigned int num, size;
- if (buf[0] == '.')
+ if (DOTLINE(buf))
break;
- else if (sscanf(buf, "%d %d", &num, &size) == 2)
- sizes[num - 1] = size;
+ else if (sscanf(buf, "%u %u", &num, &size) == 2) {
+ if (num > 0 && num <= count)
+ sizes[num - 1] = size;
+ else
+ /* warn about possible attempt to induce buffer overrun */
+ report(stderr, "Warning: ignoring bogus data for message sizes returned by server.\n");
+ }
}
return(ok);
if (!ctl->oldsaved)
return (num <= last);
else
- /* note: ID comparison is caseblind */
return (str_in_list(&ctl->oldsaved,
- str_find (&ctl->newsaved, num)));
+ str_find(&ctl->newsaved, num), FALSE));
}
+#ifdef UNUSED
+/*
+ * We could use this to fetch headers only as we do for IMAP. The trouble
+ * is that there's no way to fetch the body only. So the following RETR
+ * would have to re-fetch the header. Enough messages have longer headers
+ * than bodies to make this a net loss.
+ */
+static int pop_fetch_headers(int sock, struct query *ctl,int number,int *lenp)
+/* request headers of nth message */
+{
+ int ok;
+ char buf[POPBUFSIZE+1];
+
+ gen_send(sock, "TOP %d 0", number);
+ if ((ok = pop3_ok(sock, buf)) != 0)
+ return(ok);
+
+ *lenp = -1; /* we got sizes from the LIST response */
+
+ return(PS_SUCCESS);
+}
+#endif /* UNUSED */
+
static int pop3_fetch(int sock, struct query *ctl, int number, int *lenp)
/* request nth message */
{
int ok;
- char buf [POPBUFSIZE+1];
+ char buf[POPBUFSIZE+1];
- /* phase = PHASE_FETCH */
+#ifdef SDPS_ENABLE
+ /*
+ * See http://www.demon.net/services/mail/sdps-tech.html
+ * for a description of what we're parsing here.
+ */
+ if (ctl->server.sdps)
+ {
+ int linecount = 0;
+
+ sdps_envfrom = (char *)NULL;
+ sdps_envto = (char *)NULL;
+ gen_send(sock, "*ENV %d", number);
+ do {
+ if (gen_recv(sock, buf, sizeof(buf)))
+ {
+ break;
+ }
+ linecount++;
+ switch (linecount) {
+ case 4:
+ /* No need to wrap envelope from address */
+ sdps_envfrom = xmalloc(strlen(buf)+1);
+ strcpy(sdps_envfrom,buf);
+ break;
+ case 5:
+ /* Wrap address with To: <> so nxtaddr() likes it */
+ sdps_envto = xmalloc(strlen(buf)+7);
+ sprintf(sdps_envto,"To: <%s>",buf);
+ break;
+ }
+ } while
+ (!(buf[0] == '.' && (buf[1] == '\r' || buf[1] == '\n' || buf[1] == '\0')));
+ }
+#endif /* SDPS_ENABLE */
- gen_send(sock, "RETR %d", number);
+ /*
+ * Though the POP RFCs don't document this fact, on almost every
+ * POP3 server I know of messages are marked "seen" only at the
+ * time the OK response to a RETR is issued.
+ *
+ * This means we can use TOP to fetch the message without setting its
+ * seen flag. This is good! It means that if the protocol exchange
+ * craps out during the message, it will still be marked `unseen' on
+ * the server. (Exception: in early 1999 SpryNet's POP3 servers were
+ * reported to mark messages seen on a TOP fetch.)
+ *
+ * However...*don't* do this if we're using keep to suppress deletion!
+ * In that case, marking the seen flag is the only way to prevent the
+ * message from being re-fetched on subsequent runs.
+ *
+ * Also use RETR if fetchall is on. This gives us a workaround
+ * for servers like usa.net's that bungle TOP. It's pretty
+ * harmless because fetchall guarantees that any message dropped
+ * by an interrupted RETR will be picked up on the next poll of the
+ * site.
+ *
+ * We take advantage here of the fact that, according to all the
+ * POP RFCs, "if the number of lines requested by the POP3 client
+ * is greater than than the number of lines in the body, then the
+ * POP3 server sends the entire message.").
+ *
+ * The line count passed (99999999) is the maximum value CompuServe will
+ * accept; it's much lower than the natural value 2147483646 (the maximum
+ * twos-complement signed 32-bit integer minus 1) */
+ if (ctl->keep || ctl->fetchall)
+ gen_send(sock, "RETR %d", number);
+ else
+ gen_send(sock, "TOP %d 99999999", number);
if ((ok = pop3_ok(sock, buf)) != 0)
return(ok);
*lenp = -1; /* we got sizes from the LIST response */
- return(0);
+ return(PS_SUCCESS);
+}
+
+static void mark_uid_seen(struct query *ctl, int number)
+/* Tell the UID code we've seen this. */
+{
+ if (ctl->newsaved)
+ {
+ struct idlist *sdp;
+
+ for (sdp = ctl->newsaved; sdp; sdp = sdp->next)
+ if (sdp->val.status.num == number)
+ {
+ sdp->val.status.mark = UID_SEEN;
+ save_str(&ctl->oldsaved, sdp->id,UID_SEEN);
+ }
+ }
}
static int pop3_delete(int sock, struct query *ctl, int number)
/* delete a given message */
{
+ int ok;
+ mark_uid_seen(ctl, number);
/* actually, mark for deletion -- doesn't happen until QUIT time */
- return(gen_transact(sock, "DELE %d", number));
+ ok = gen_transact(sock, "DELE %d", number);
+ if (ok != PS_SUCCESS)
+ return(ok);
+ delete_str(&ctl->newsaved, number);
+ return(PS_SUCCESS);
+}
+
+static int pop3_mark_seen(int sock, struct query *ctl, int number)
+/* mark a given message as seen */
+{
+ mark_uid_seen(ctl, number);
+ return(PS_SUCCESS);
}
static int pop3_logout(int sock, struct query *ctl)
{
int ok;
- /* phase = PHASE_LOGOUT */
+#ifdef __UNUSED__
+ /*
+ * We used to do this in case the server marks messages deleted when seen.
+ * (Yes, this has been reported, in the MercuryP/NLM server.
+ * It's even legal under RFC 1939 (section 8) as a site policy.)
+ * It interacted badly with UIDL, though. Thomas Zajic wrote:
+ * "Running 'fetchmail -F -v' and checking the logs, I found out
+ * that fetchmail did in fact flush my mailbox properly, but sent
+ * a RSET just before sending QUIT to log off. This caused the
+ * POP3 server to undo/forget about the previous DELEs, resetting
+ * my mailbox to its original (ie. unflushed) state. The
+ * ~/.fetchids file did get flushed though, so the next time
+ * fetchmail was run it saw all the old messages as new ones ..."
+ */
+ if (ctl->keep)
+ gen_transact(sock, "RSET");
+#endif /* __UNUSED__ */
ok = gen_transact(sock, "QUIT");
if (!ok)
expunge_uids(ctl);
+ if (ctl->lastid)
+ {
+ free(ctl->lastid);
+ ctl->lastid = NULL;
+ }
+
return(ok);
}
const static struct method pop3 =
{
"POP3", /* Post Office Protocol v3 */
-#if INET6
+#if INET6_ENABLE
"pop3", /* standard POP3 port */
-#else /* INET6 */
+ "pop3s", /* ssl POP3 port */
+#else /* INET6_ENABLE */
110, /* standard POP3 port */
-#endif /* INET6 */
+ 995, /* ssl POP3 port */
+#endif /* INET6_ENABLE */
FALSE, /* this is not a tagged protocol */
TRUE, /* this uses a message delimiter */
pop3_ok, /* parse command response */
NULL, /* no way to fetch body alone */
NULL, /* no message trailer */
pop3_delete, /* how to delete a message */
+ pop3_mark_seen, /* how to mark a message as seen */
pop3_logout, /* log out, we're done */
FALSE, /* no, we can't re-poll */
};
{
#ifndef MBOX
if (ctl->mailboxes->id) {
- fprintf(stderr,"Option --remote is not supported with POP3\n");
+ fprintf(stderr,GT_("Option --remote is not supported with POP3\n"));
return(PS_SYNTAX);
}
#endif /* MBOX */
- peek_capable = FALSE;
+ peek_capable = !ctl->fetchall;
return(do_protocol(ctl, &pop3));
}
#endif /* POP3_ENABLE */