struct ieee80211_local *local = sdata->local;
struct ps_data *ps;
- /*
- * At this point, when being called as call_rcu callback,
- * neither mac80211 nor the driver can reference this
- * sta struct any more except by still existing timers
- * associated with this station that we clean up below.
- *
- * Note though that this still uses the sdata and even
- * calls the driver in AP and mesh mode, so interfaces
- * of those types mush use call sta_info_flush_cleanup()
- * (typically via sta_info_flush()) before deconfiguring
- * the driver.
- *
- * In station mode, nothing happens here so it doesn't
- * have to (and doesn't) do that, this is intentional to
- * speed up roaming.
- */
-
if (test_sta_flag(sta, WLAN_STA_PS_STA)) {
if (sta->sdata->vif.type == NL80211_IFTYPE_AP ||
sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
sta_info_free(local, sta);
}
-void ieee80211_cleanup_sdata_stas(struct ieee80211_sub_if_data *sdata)
-{
- struct sta_info *sta;
-
- spin_lock_bh(&sdata->cleanup_stations_lock);
- while (!list_empty(&sdata->cleanup_stations)) {
- sta = list_first_entry(&sdata->cleanup_stations,
- struct sta_info, list);
- list_del(&sta->list);
- spin_unlock_bh(&sdata->cleanup_stations_lock);
-
- cleanup_single_sta(sta);
-
- spin_lock_bh(&sdata->cleanup_stations_lock);
- }
-
- spin_unlock_bh(&sdata->cleanup_stations_lock);
-}
-
-static void free_sta_rcu(struct rcu_head *h)
-{
- struct sta_info *sta = container_of(h, struct sta_info, rcu_head);
- struct ieee80211_sub_if_data *sdata = sta->sdata;
-
- spin_lock(&sdata->cleanup_stations_lock);
- list_add_tail(&sta->list, &sdata->cleanup_stations);
- spin_unlock(&sdata->cleanup_stations_lock);
-
- ieee80211_queue_work(&sdata->local->hw, &sdata->cleanup_stations_wk);
-}
-
/* protected by RCU */
struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata,
const u8 *addr)
*/
void sta_info_free(struct ieee80211_local *local, struct sta_info *sta)
{
+ int i;
+
if (sta->rate_ctrl)
rate_control_free_sta(sta);
+ if (sta->tx_lat) {
+ for (i = 0; i < IEEE80211_NUM_TIDS; i++)
+ kfree(sta->tx_lat[i].bins);
+ kfree(sta->tx_lat);
+ }
+
sta_dbg(sta->sdata, "Destroyed STA %pM\n", sta->sta.addr);
kfree(sta);
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
struct timespec uptime;
+ struct ieee80211_tx_latency_bin_ranges *tx_latency;
int i;
sta = kzalloc(sizeof(*sta) + local->hw.sta_data_size, gfp);
if (!sta)
return NULL;
+ rcu_read_lock();
+ tx_latency = rcu_dereference(local->tx_latency);
+ /* init stations Tx latency statistics && TID bins */
+ if (tx_latency) {
+ sta->tx_lat = kzalloc(IEEE80211_NUM_TIDS *
+ sizeof(struct ieee80211_tx_latency_stat),
+ GFP_ATOMIC);
+ if (!sta->tx_lat) {
+ rcu_read_unlock();
+ goto free;
+ }
+
+ if (tx_latency->n_ranges) {
+ for (i = 0; i < IEEE80211_NUM_TIDS; i++) {
+ /* size of bins is size of the ranges +1 */
+ sta->tx_lat[i].bin_count =
+ tx_latency->n_ranges + 1;
+ sta->tx_lat[i].bins =
+ kcalloc(sta->tx_lat[i].bin_count,
+ sizeof(u32), GFP_ATOMIC);
+ if (!sta->tx_lat[i].bins) {
+ rcu_read_unlock();
+ goto free;
+ }
+ }
+ }
+ }
+ rcu_read_unlock();
+
spin_lock_init(&sta->lock);
INIT_WORK(&sta->drv_unblock_wk, sta_unblock);
INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work);
for (i = 0; i < ARRAY_SIZE(sta->chain_signal_avg); i++)
ewma_init(&sta->chain_signal_avg[i], 1024, 8);
- if (sta_prepare_rate_control(local, sta, gfp)) {
- kfree(sta);
- return NULL;
- }
+ if (sta_prepare_rate_control(local, sta, gfp))
+ goto free;
for (i = 0; i < IEEE80211_NUM_TIDS; i++) {
/*
}
sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr);
-
return sta;
+
+free:
+ if (sta->tx_lat) {
+ for (i = 0; i < IEEE80211_NUM_TIDS; i++)
+ kfree(sta->tx_lat[i].bins);
+ kfree(sta->tx_lat);
+ }
+ kfree(sta);
+ return NULL;
}
static int sta_info_insert_check(struct sta_info *sta)
set_sta_flag(sta, WLAN_STA_INSERTED);
+ ieee80211_recalc_min_chandef(sdata);
ieee80211_sta_debugfs_add(sta);
rate_control_add_sta_debugfs(sta);
#ifdef CONFIG_MAC80211_MESH
} else if (ieee80211_vif_is_mesh(&sta->sdata->vif)) {
ps = &sta->sdata->u.mesh.ps;
- /* TIM map only for PLID <= IEEE80211_MAX_AID */
- id = le16_to_cpu(sta->plid) % IEEE80211_MAX_AID;
+ /* TIM map only for 1 <= PLID <= IEEE80211_MAX_AID */
+ id = sta->plid % (IEEE80211_MAX_AID + 1);
#endif
} else {
return;
return have_buffered;
}
-int __must_check __sta_info_destroy(struct sta_info *sta)
+static int __must_check __sta_info_destroy_part1(struct sta_info *sta)
{
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
ieee80211_sta_tear_down_BA_sessions(sta, AGG_STOP_DESTROY_STA);
ret = sta_info_hash_del(local, sta);
- if (ret)
+ if (WARN_ON(ret))
return ret;
list_del_rcu(&sta->list);
- /* this always calls synchronize_net() */
+ drv_sta_pre_rcu_remove(local, sta->sdata, sta);
+
+ if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
+ rcu_access_pointer(sdata->u.vlan.sta) == sta)
+ RCU_INIT_POINTER(sdata->u.vlan.sta, NULL);
+
+ return 0;
+}
+
+static void __sta_info_destroy_part2(struct sta_info *sta)
+{
+ struct ieee80211_local *local = sta->local;
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ int ret;
+
+ /*
+ * NOTE: This assumes at least synchronize_net() was done
+ * after _part1 and before _part2!
+ */
+
+ might_sleep();
+ lockdep_assert_held(&local->sta_mtx);
+
+ /* now keys can no longer be reached */
ieee80211_free_sta_keys(local, sta);
sta->dead = true;
local->num_sta--;
local->sta_generation++;
- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
- RCU_INIT_POINTER(sdata->u.vlan.sta, NULL);
-
while (sta->sta_state > IEEE80211_STA_NONE) {
ret = sta_info_move_state(sta, sta->sta_state - 1);
if (ret) {
rate_control_remove_sta_debugfs(sta);
ieee80211_sta_debugfs_remove(sta);
+ ieee80211_recalc_min_chandef(sdata);
+
+ cleanup_single_sta(sta);
+}
- call_rcu(&sta->rcu_head, free_sta_rcu);
+int __must_check __sta_info_destroy(struct sta_info *sta)
+{
+ int err = __sta_info_destroy_part1(sta);
+
+ if (err)
+ return err;
+
+ synchronize_net();
+
+ __sta_info_destroy_part2(sta);
return 0;
}
}
-int sta_info_flush_defer(struct ieee80211_sub_if_data *sdata)
+int __sta_info_flush(struct ieee80211_sub_if_data *sdata, bool vlans)
{
struct ieee80211_local *local = sdata->local;
struct sta_info *sta, *tmp;
+ LIST_HEAD(free_list);
int ret = 0;
might_sleep();
+ WARN_ON(vlans && sdata->vif.type != NL80211_IFTYPE_AP);
+ WARN_ON(vlans && !sdata->bss);
+
mutex_lock(&local->sta_mtx);
list_for_each_entry_safe(sta, tmp, &local->sta_list, list) {
- if (sdata == sta->sdata) {
- WARN_ON(__sta_info_destroy(sta));
+ if (sdata == sta->sdata ||
+ (vlans && sdata->bss == sta->sdata->bss)) {
+ if (!WARN_ON(__sta_info_destroy_part1(sta)))
+ list_add(&sta->free_list, &free_list);
ret++;
}
}
+
+ if (!list_empty(&free_list)) {
+ synchronize_net();
+ list_for_each_entry_safe(sta, tmp, &free_list, free_list)
+ __sta_info_destroy_part2(sta);
+ }
mutex_unlock(&local->sta_mtx);
return ret;
}
-void sta_info_flush_cleanup(struct ieee80211_sub_if_data *sdata)
-{
- ieee80211_cleanup_sdata_stas(sdata);
- cancel_work_sync(&sdata->cleanup_stations_wk);
-}
-
void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
unsigned long exp_time)
{
static void ieee80211_send_null_response(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, int tid,
- enum ieee80211_frame_release_type reason)
+ enum ieee80211_frame_release_type reason,
+ bool call_driver)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_qos_hdr *nullfunc;
IEEE80211_TX_STATUS_EOSP |
IEEE80211_TX_CTL_REQ_TX_STATUS;
- drv_allow_buffered_frames(local, sta, BIT(tid), 1, reason, false);
+ if (call_driver)
+ drv_allow_buffered_frames(local, sta, BIT(tid), 1,
+ reason, false);
skb->dev = sdata->dev;
rcu_read_unlock();
}
+static int find_highest_prio_tid(unsigned long tids)
+{
+ /* lower 3 TIDs aren't ordered perfectly */
+ if (tids & 0xF8)
+ return fls(tids) - 1;
+ /* TID 0 is BE just like TID 3 */
+ if (tids & BIT(0))
+ return 0;
+ return fls(tids) - 1;
+}
+
static void
ieee80211_sta_ps_deliver_response(struct sta_info *sta,
int n_frames, u8 ignored_acs,
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
struct ieee80211_local *local = sdata->local;
- bool found = false;
bool more_data = false;
int ac;
unsigned long driver_release_tids = 0;
__skb_queue_head_init(&frames);
- /*
- * Get response frame(s) and more data bit for it.
- */
+ /* Get response frame(s) and more data bit for the last one. */
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
unsigned long tids;
tids = ieee80211_tids_for_ac(ac);
- if (!found) {
- driver_release_tids = sta->driver_buffered_tids & tids;
- if (driver_release_tids) {
- found = true;
- } else {
- struct sk_buff *skb;
-
- while (n_frames > 0) {
- skb = skb_dequeue(&sta->tx_filtered[ac]);
- if (!skb) {
- skb = skb_dequeue(
- &sta->ps_tx_buf[ac]);
- if (skb)
- local->total_ps_buffered--;
- }
- if (!skb)
- break;
- n_frames--;
- found = true;
- __skb_queue_tail(&frames, skb);
- }
- }
+ /* if we already have frames from software, then we can't also
+ * release from hardware queues
+ */
+ if (skb_queue_empty(&frames))
+ driver_release_tids |= sta->driver_buffered_tids & tids;
- /*
- * If the driver has data on more than one TID then
+ if (driver_release_tids) {
+ /* If the driver has data on more than one TID then
* certainly there's more data if we release just a
- * single frame now (from a single TID).
+ * single frame now (from a single TID). This will
+ * only happen for PS-Poll.
*/
if (reason == IEEE80211_FRAME_RELEASE_PSPOLL &&
hweight16(driver_release_tids) > 1) {
more_data = true;
driver_release_tids =
- BIT(ffs(driver_release_tids) - 1);
+ BIT(find_highest_prio_tid(
+ driver_release_tids));
break;
}
+ } else {
+ struct sk_buff *skb;
+
+ while (n_frames > 0) {
+ skb = skb_dequeue(&sta->tx_filtered[ac]);
+ if (!skb) {
+ skb = skb_dequeue(
+ &sta->ps_tx_buf[ac]);
+ if (skb)
+ local->total_ps_buffered--;
+ }
+ if (!skb)
+ break;
+ n_frames--;
+ __skb_queue_tail(&frames, skb);
+ }
}
+ /* If we have more frames buffered on this AC, then set the
+ * more-data bit and abort the loop since we can't send more
+ * data from other ACs before the buffered frames from this.
+ */
if (!skb_queue_empty(&sta->tx_filtered[ac]) ||
!skb_queue_empty(&sta->ps_tx_buf[ac])) {
more_data = true;
}
}
- if (!found) {
+ if (skb_queue_empty(&frames) && !driver_release_tids) {
int tid;
/*
/* This will evaluate to 1, 3, 5 or 7. */
tid = 7 - ((ffs(~ignored_acs) - 1) << 1);
- ieee80211_send_null_response(sdata, sta, tid, reason);
- return;
- }
-
- if (!driver_release_tids) {
+ ieee80211_send_null_response(sdata, sta, tid, reason, true);
+ } else if (!driver_release_tids) {
struct sk_buff_head pending;
struct sk_buff *skb;
int num = 0;
u16 tids = 0;
+ bool need_null = false;
skb_queue_head_init(&pending);
ieee80211_is_qos_nullfunc(hdr->frame_control))
qoshdr = ieee80211_get_qos_ctl(hdr);
- /* end service period after last frame */
- if (skb_queue_empty(&frames)) {
- if (reason == IEEE80211_FRAME_RELEASE_UAPSD &&
- qoshdr)
- *qoshdr |= IEEE80211_QOS_CTL_EOSP;
+ tids |= BIT(skb->priority);
+
+ __skb_queue_tail(&pending, skb);
+
+ /* end service period after last frame or add one */
+ if (!skb_queue_empty(&frames))
+ continue;
+ if (reason != IEEE80211_FRAME_RELEASE_UAPSD) {
+ /* for PS-Poll, there's only one frame */
info->flags |= IEEE80211_TX_STATUS_EOSP |
IEEE80211_TX_CTL_REQ_TX_STATUS;
+ break;
}
- if (qoshdr)
- tids |= BIT(*qoshdr & IEEE80211_QOS_CTL_TID_MASK);
- else
- tids |= BIT(0);
+ /* For uAPSD, things are a bit more complicated. If the
+ * last frame has a QoS header (i.e. is a QoS-data or
+ * QoS-nulldata frame) then just set the EOSP bit there
+ * and be done.
+ * If the frame doesn't have a QoS header (which means
+ * it should be a bufferable MMPDU) then we can't set
+ * the EOSP bit in the QoS header; add a QoS-nulldata
+ * frame to the list to send it after the MMPDU.
+ *
+ * Note that this code is only in the mac80211-release
+ * code path, we assume that the driver will not buffer
+ * anything but QoS-data frames, or if it does, will
+ * create the QoS-nulldata frame by itself if needed.
+ *
+ * Cf. 802.11-2012 10.2.1.10 (c).
+ */
+ if (qoshdr) {
+ *qoshdr |= IEEE80211_QOS_CTL_EOSP;
- __skb_queue_tail(&pending, skb);
+ info->flags |= IEEE80211_TX_STATUS_EOSP |
+ IEEE80211_TX_CTL_REQ_TX_STATUS;
+ } else {
+ /* The standard isn't completely clear on this
+ * as it says the more-data bit should be set
+ * if there are more BUs. The QoS-Null frame
+ * we're about to send isn't buffered yet, we
+ * only create it below, but let's pretend it
+ * was buffered just in case some clients only
+ * expect more-data=0 when eosp=1.
+ */
+ hdr->frame_control |=
+ cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+ need_null = true;
+ num++;
+ }
+ break;
}
drv_allow_buffered_frames(local, sta, tids, num,
ieee80211_add_pending_skbs(local, &pending);
+ if (need_null)
+ ieee80211_send_null_response(
+ sdata, sta, find_highest_prio_tid(tids),
+ reason, false);
+
sta_info_recalc_tim(sta);
} else {
/*
* We need to release a frame that is buffered somewhere in the
* driver ... it'll have to handle that.
- * Note that, as per the comment above, it'll also have to see
- * if there is more than just one frame on the specific TID that
- * we're releasing from, and it needs to set the more-data bit
- * accordingly if we tell it that there's no more data. If we do
- * tell it there's more data, then of course the more-data bit
- * needs to be set anyway.
+ * Note that the driver also has to check the number of frames
+ * on the TIDs we're releasing from - if there are more than
+ * n_frames it has to set the more-data bit (if we didn't ask
+ * it to set it anyway due to other buffered frames); if there
+ * are fewer than n_frames it has to make sure to adjust that
+ * to allow the service period to end properly.
*/
drv_release_buffered_frames(local, sta, driver_release_tids,
n_frames, reason, more_data);
/*
* Note that we don't recalculate the TIM bit here as it would
* most likely have no effect at all unless the driver told us
- * that the TID became empty before returning here from the
+ * that the TID(s) became empty before returning here from the
* release function.
- * Either way, however, when the driver tells us that the TID
+ * Either way, however, when the driver tells us that the TID(s)
* became empty we'll do the TIM recalculation.
*/
}
if (WARN_ON(tid >= IEEE80211_NUM_TIDS))
return;
+ trace_api_sta_set_buffered(sta->local, pubsta, tid, buffered);
+
if (buffered)
set_bit(tid, &sta->driver_buffered_tids);
else
projects / ~andy / linux / blobdiff