#include <linux/netdevice.h>
#include <linux/types.h>
#include <linux/skbuff.h>
-
+#include <linux/debugfs.h>
#include <net/mac80211.h>
#include "ieee80211_rate.h"
{
int i, j, k, tmp;
- if (cur + adj < 0)
- return 0;
- if (cur + adj >= l)
- return l - 1;
+ j = r[cur].rev_index;
+ i = j + adj;
- i = r[cur + adj].rev_index;
+ if (i < 0)
+ return r[0].index;
+ if (i >= l - 1)
+ return r[l - 1].index;
- j = r[cur].rev_index;
+ tmp = i;
if (adj < 0) {
- tmp = i;
- for (k = j; k >= i; k--)
- if (r[k].diff <= r[j].diff)
- tmp = k;
- return r[tmp].index;
- } else if (adj > 0) {
- tmp = i;
- for (k = i + 1; k + i < l; k++)
- if (r[k].diff <= r[i].diff)
- tmp = k;
- return r[tmp].index;
+ for (k = j; k >= i; k--)
+ if (r[k].diff <= r[j].diff)
+ tmp = k;
+ } else {
+ for (k = i + 1; k + i < l; k++)
+ if (r[k].diff <= r[i].diff)
+ tmp = k;
}
- return cur + adj;
+
+ return r[tmp].index;
}
static void rate_control_pid_adjust_rate(struct ieee80211_local *local,
int back = (adj > 0) ? 1 : -1;
sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
- if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) {
- /* forced unicast rate - do not change STA rate */
- return;
- }
mode = local->oper_hw_mode;
maxrate = sdata->bss ? sdata->bss->max_ratectrl_rateidx : -1;
}
/* Normalize the failed frames per-rate differences. */
-static void rate_control_pid_normalize(struct rc_pid_rateinfo *r, int l)
+static void rate_control_pid_normalize(struct rc_pid_info *pinfo, int l)
{
- int i;
+ int i, norm_offset = pinfo->norm_offset;
+ struct rc_pid_rateinfo *r = pinfo->rinfo;
- if (r[0].diff > RC_PID_NORM_OFFSET)
- r[0].diff -= RC_PID_NORM_OFFSET;
- else if (r[0].diff < -RC_PID_NORM_OFFSET)
- r[0].diff += RC_PID_NORM_OFFSET;
+ if (r[0].diff > norm_offset)
+ r[0].diff -= norm_offset;
+ else if (r[0].diff < -norm_offset)
+ r[0].diff += norm_offset;
for (i = 0; i < l - 1; i++)
- if (r[i + 1].diff > r[i].diff + RC_PID_NORM_OFFSET)
- r[i + 1].diff -= RC_PID_NORM_OFFSET;
+ if (r[i + 1].diff > r[i].diff + norm_offset)
+ r[i + 1].diff -= norm_offset;
else if (r[i + 1].diff <= r[i].diff)
- r[i + 1].diff += RC_PID_NORM_OFFSET;
+ r[i + 1].diff += norm_offset;
}
static void rate_control_pid_sample(struct rc_pid_info *pinfo,
struct ieee80211_hw_mode *mode;
u32 pf;
s32 err_avg;
- s32 err_prop;
- s32 err_int;
- s32 err_der;
+ u32 err_prop;
+ u32 err_int;
+ u32 err_der;
int adj, i, j, tmp;
+ unsigned long period;
mode = local->oper_hw_mode;
spinfo = sta->rate_ctrl_priv;
/* In case nothing happened during the previous control interval, turn
* the sharpening factor on. */
- if (jiffies - spinfo->last_sample > 2 * RC_PID_INTERVAL)
- spinfo->sharp_cnt = RC_PID_SHARPENING_DURATION;
+ period = (HZ * pinfo->sampling_period + 500) / 1000;
+ if (!period)
+ period = 1;
+ if (jiffies - spinfo->last_sample > 2 * period)
+ spinfo->sharp_cnt = pinfo->sharpen_duration;
spinfo->last_sample = jiffies;
rinfo[j].diff = rinfo[i].diff + tmp;
pinfo->oldrate = sta->txrate;
}
- rate_control_pid_normalize(rinfo, mode->num_rates);
+ rate_control_pid_normalize(pinfo, mode->num_rates);
/* Compute the proportional, integral and derivative errors. */
- err_prop = RC_PID_TARGET_PF - pf;
+ err_prop = (pinfo->target << RC_PID_ARITH_SHIFT) - pf;
- err_avg = spinfo->err_avg_sc >> RC_PID_SMOOTHING_SHIFT;
+ err_avg = spinfo->err_avg_sc >> pinfo->smoothing_shift;
spinfo->err_avg_sc = spinfo->err_avg_sc - err_avg + err_prop;
- err_int = spinfo->err_avg_sc >> RC_PID_SMOOTHING_SHIFT;
+ err_int = spinfo->err_avg_sc >> pinfo->smoothing_shift;
- err_der = pf - spinfo->last_pf
- * (1 + RC_PID_SHARPENING_FACTOR * spinfo->sharp_cnt);
+ err_der = (pf - spinfo->last_pf) *
+ (1 + pinfo->sharpen_factor * spinfo->sharp_cnt);
spinfo->last_pf = pf;
if (spinfo->sharp_cnt)
spinfo->sharp_cnt--;
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_sub_if_data *sdata;
struct rc_pid_info *pinfo = priv;
struct sta_info *sta;
struct rc_pid_sta_info *spinfo;
+ unsigned long period;
sta = sta_info_get(local, hdr->addr1);
if (!sta)
return;
+ /* Don't update the state if we're not controlling the rate. */
+ sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
+ if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) {
+ sta->txrate = sdata->bss->max_ratectrl_rateidx;
+ return;
+ }
+
/* Ignore all frames that were sent with a different rate than the rate
* we currently advise mac80211 to use. */
if (status->control.rate != &local->oper_hw_mode->rates[sta->txrate])
- return;
+ goto ignore;
spinfo = sta->rate_ctrl_priv;
spinfo->tx_num_xmit++;
sta->tx_num_mpdu_fail += status->retry_count;
/* Update PID controller state. */
- if (time_after(jiffies, spinfo->last_sample + RC_PID_INTERVAL))
+ period = (HZ * pinfo->sampling_period + 500) / 1000;
+ if (!period)
+ period = 1;
+ if (time_after(jiffies, spinfo->last_sample + period))
rate_control_pid_sample(pinfo, local, sta);
+ignore:
sta_info_put(sta);
}
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
int rateidx;
+ u16 fc;
sta = sta_info_get(local, hdr->addr1);
- if (!sta) {
- sel->rate = rate_lowest(local, mode, NULL);
- sta_info_put(sta);
+ /* Send management frames and broadcast/multicast data using lowest
+ * rate. */
+ fc = le16_to_cpu(hdr->frame_control);
+ if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
+ is_multicast_ether_addr(hdr->addr1) || !sta) {
+ sel->rate = rate_lowest(local, mode, sta);
+ if (sta)
+ sta_info_put(sta);
return;
}
+ /* If a forced rate is in effect, select it. */
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ if (sdata->bss && sdata->bss->force_unicast_rateidx > -1)
+ sta->txrate = sdata->bss->force_unicast_rateidx;
+
rateidx = sta->txrate;
if (rateidx >= mode->num_rates)
rateidx = mode->num_rates - 1;
+ sta->last_txrate = rateidx;
+
sta_info_put(sta);
sel->rate = &mode->rates[rateidx];
struct ieee80211_hw_mode *mode;
int i, j, tmp;
bool s;
+#ifdef CONFIG_MAC80211_DEBUGFS
+ struct rc_pid_debugfs_entries *de;
+#endif
pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC);
if (!pinfo)
for (i = 0; i < mode->num_rates; i++) {
rinfo[i].index = i;
rinfo[i].rev_index = i;
- if (RC_PID_FAST_START)
+ if (pinfo->fast_start)
rinfo[i].diff = 0;
else
- rinfo[i].diff = i * RC_PID_NORM_OFFSET;
+ rinfo[i].diff = i * pinfo->norm_offset;
}
for (i = 1; i < mode->num_rates; i++) {
s = 0;
}
pinfo->target = RC_PID_TARGET_PF;
+ pinfo->sampling_period = RC_PID_INTERVAL;
pinfo->coeff_p = RC_PID_COEFF_P;
pinfo->coeff_i = RC_PID_COEFF_I;
pinfo->coeff_d = RC_PID_COEFF_D;
+ pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT;
+ pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR;
+ pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION;
+ pinfo->norm_offset = RC_PID_NORM_OFFSET;
+ pinfo->fast_start = RC_PID_FAST_START;
pinfo->rinfo = rinfo;
pinfo->oldrate = 0;
+#ifdef CONFIG_MAC80211_DEBUGFS
+ de = &pinfo->dentries;
+ de->dir = debugfs_create_dir("rc80211_pid",
+ local->hw.wiphy->debugfsdir);
+ de->target = debugfs_create_u32("target_pf", S_IRUSR | S_IWUSR,
+ de->dir, &pinfo->target);
+ de->sampling_period = debugfs_create_u32("sampling_period",
+ S_IRUSR | S_IWUSR, de->dir,
+ &pinfo->sampling_period);
+ de->coeff_p = debugfs_create_u32("coeff_p", S_IRUSR | S_IWUSR,
+ de->dir, &pinfo->coeff_p);
+ de->coeff_i = debugfs_create_u32("coeff_i", S_IRUSR | S_IWUSR,
+ de->dir, &pinfo->coeff_i);
+ de->coeff_d = debugfs_create_u32("coeff_d", S_IRUSR | S_IWUSR,
+ de->dir, &pinfo->coeff_d);
+ de->smoothing_shift = debugfs_create_u32("smoothing_shift",
+ S_IRUSR | S_IWUSR, de->dir,
+ &pinfo->smoothing_shift);
+ de->sharpen_factor = debugfs_create_u32("sharpen_factor",
+ S_IRUSR | S_IWUSR, de->dir,
+ &pinfo->sharpen_factor);
+ de->sharpen_duration = debugfs_create_u32("sharpen_duration",
+ S_IRUSR | S_IWUSR, de->dir,
+ &pinfo->sharpen_duration);
+ de->norm_offset = debugfs_create_u32("norm_offset",
+ S_IRUSR | S_IWUSR, de->dir,
+ &pinfo->norm_offset);
+ de->fast_start = debugfs_create_bool("fast_start",
+ S_IRUSR | S_IWUSR, de->dir,
+ &pinfo->fast_start);
+#endif
+
return pinfo;
}
static void rate_control_pid_free(void *priv)
{
struct rc_pid_info *pinfo = priv;
+#ifdef CONFIG_MAC80211_DEBUGFS
+ struct rc_pid_debugfs_entries *de = &pinfo->dentries;
+
+ debugfs_remove(de->fast_start);
+ debugfs_remove(de->norm_offset);
+ debugfs_remove(de->sharpen_duration);
+ debugfs_remove(de->sharpen_factor);
+ debugfs_remove(de->smoothing_shift);
+ debugfs_remove(de->coeff_d);
+ debugfs_remove(de->coeff_i);
+ debugfs_remove(de->coeff_p);
+ debugfs_remove(de->sampling_period);
+ debugfs_remove(de->target);
+ debugfs_remove(de->dir);
+#endif
+
kfree(pinfo->rinfo);
kfree(pinfo);
}
if (spinfo == NULL)
return NULL;
+ spinfo->last_sample = jiffies;
+
#ifdef CONFIG_MAC80211_DEBUGFS
spin_lock_init(&spinfo->events.lock);
init_waitqueue_head(&spinfo->events.waitqueue);
kfree(spinfo);
}
-struct rate_control_ops mac80211_rcpid = {
+static struct rate_control_ops mac80211_rcpid = {
.name = "pid",
.tx_status = rate_control_pid_tx_status,
.get_rate = rate_control_pid_get_rate,
.remove_sta_debugfs = rate_control_pid_remove_sta_debugfs,
#endif
};
+
+MODULE_DESCRIPTION("PID controller based rate control algorithm");
+MODULE_AUTHOR("Stefano Brivio");
+MODULE_AUTHOR("Mattias Nissler");
+MODULE_LICENSE("GPL");
+
+int __init rc80211_pid_init(void)
+{
+ return ieee80211_rate_control_register(&mac80211_rcpid);
+}
+
+void rc80211_pid_exit(void)
+{
+ ieee80211_rate_control_unregister(&mac80211_rcpid);
+}
+
+#ifdef CONFIG_MAC80211_RC_PID_MODULE
+module_init(rc80211_pid_init);
+module_exit(rc80211_pid_exit);
+#endif