switch (vht_oper->chan_width) {
case IEEE80211_VHT_CHANWIDTH_USE_HT:
vht_chandef.width = chandef->width;
+ vht_chandef.center_freq1 = chandef->center_freq1;
break;
case IEEE80211_VHT_CHANWIDTH_80MHZ:
vht_chandef.width = NL80211_CHAN_WIDTH_80;
ret = 0;
out:
+ /*
+ * When tracking the current AP, don't do any further checks if the
+ * new chandef is identical to the one we're currently using for the
+ * connection. This keeps us from playing ping-pong with regulatory,
+ * without it the following can happen (for example):
+ * - connect to an AP with 80 MHz, world regdom allows 80 MHz
+ * - AP advertises regdom US
+ * - CRDA loads regdom US with 80 MHz prohibited (old database)
+ * - the code below detects an unsupported channel, downgrades, and
+ * we disconnect from the AP in the caller
+ * - disconnect causes CRDA to reload world regdomain and the game
+ * starts anew.
+ * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
+ *
+ * It seems possible that there are still scenarios with CSA or real
+ * bandwidth changes where a this could happen, but those cases are
+ * less common and wouldn't completely prevent using the AP.
+ */
+ if (tracking &&
+ cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
+ return ret;
+
/* don't print the message below for VHT mismatch if VHT is disabled */
if (ret & IEEE80211_STA_DISABLE_VHT)
vht_chandef = *chandef;
if (WARN_ON_ONCE(!sta))
return -EINVAL;
+ /*
+ * if bss configuration changed store the new one -
+ * this may be applicable even if channel is identical
+ */
+ ht_opmode = le16_to_cpu(ht_oper->operation_mode);
+ if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
+ *changed |= BSS_CHANGED_HT;
+ sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
+ }
+
chan = sdata->vif.bss_conf.chandef.chan;
sband = local->hw.wiphy->bands[chan->band];
IEEE80211_RC_BW_CHANGED);
}
- ht_opmode = le16_to_cpu(ht_oper->operation_mode);
-
- /* if bss configuration changed store the new one */
- if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
- *changed |= BSS_CHANGED_HT;
- sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
- }
-
return 0;
}
}
/* if present, add any custom IEs that go before HT */
- if (assoc_data->ie_len && assoc_data->ie) {
+ if (assoc_data->ie_len) {
static const u8 before_ht[] = {
WLAN_EID_SSID,
WLAN_EID_SUPP_RATES,
&assoc_data->ap_vht_cap);
/* if present, add any custom non-vendor IEs that go after HT */
- if (assoc_data->ie_len && assoc_data->ie) {
+ if (assoc_data->ie_len) {
noffset = ieee80211_ie_split_vendor(assoc_data->ie,
assoc_data->ie_len,
offset);
}
/* add any remaining custom (i.e. vendor specific here) IEs */
- if (assoc_data->ie_len && assoc_data->ie) {
+ if (assoc_data->ie_len) {
noffset = assoc_data->ie_len;
pos = skb_put(skb, noffset - offset);
memcpy(pos, assoc_data->ie + offset, noffset - offset);
if (!ifmgd->associated)
goto out;
- ret = ieee80211_vif_change_channel(sdata, &local->csa_chandef,
- &changed);
+ mutex_lock(&local->mtx);
+ ret = ieee80211_vif_change_channel(sdata, &changed);
+ mutex_unlock(&local->mtx);
if (ret) {
sdata_info(sdata,
"vif channel switch failed, disconnecting\n");
}
if (!local->use_chanctx) {
- local->_oper_chandef = local->csa_chandef;
+ local->_oper_chandef = sdata->csa_chandef;
/* Call "hw_config" only if doing sw channel switch.
* Otherwise update the channel directly
*/
}
/* XXX: shouldn't really modify cfg80211-owned data! */
- ifmgd->associated->channel = local->csa_chandef.chan;
+ ifmgd->associated->channel = sdata->csa_chandef.chan;
/* XXX: wait for a beacon first? */
ieee80211_wake_queues_by_reason(&local->hw,
}
mutex_unlock(&local->chanctx_mtx);
- local->csa_chandef = csa_ie.chandef;
+ sdata->csa_chandef = csa_ie.chandef;
if (csa_ie.mode)
ieee80211_stop_queues_by_reason(&local->hw,
struct ieee80211_sub_if_data *sdata =
container_of(delayed_work, struct ieee80211_sub_if_data,
dfs_cac_timer_work);
+ struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
- ieee80211_vif_release_channel(sdata);
-
- cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_FINISHED, GFP_KERNEL);
+ mutex_lock(&sdata->local->mtx);
+ if (sdata->wdev.cac_started) {
+ ieee80211_vif_release_channel(sdata);
+ cfg80211_cac_event(sdata->dev, &chandef,
+ NL80211_RADAR_CAC_FINISHED,
+ GFP_KERNEL);
+ }
+ mutex_unlock(&sdata->local->mtx);
}
/* MLME */
memset(ifmgd->bssid, 0, ETH_ALEN);
/* remove AP and TDLS peers */
- sta_info_flush_defer(sdata);
+ sta_info_flush(sdata);
/* finally reset all BSS / config parameters */
changed |= ieee80211_reset_erp_info(sdata);
ifmgd->have_beacon = false;
ifmgd->flags = 0;
+ mutex_lock(&local->mtx);
ieee80211_vif_release_channel(sdata);
+ mutex_unlock(&local->mtx);
+
+ sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
}
void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
memset(sdata->u.mgd.bssid, 0, ETH_ALEN);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
sdata->u.mgd.flags = 0;
+ mutex_lock(&sdata->local->mtx);
ieee80211_vif_release_channel(sdata);
+ mutex_unlock(&sdata->local->mtx);
}
cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
memset(sdata->u.mgd.bssid, 0, ETH_ALEN);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
sdata->u.mgd.flags = 0;
+ mutex_lock(&sdata->local->mtx);
ieee80211_vif_release_channel(sdata);
+ mutex_unlock(&sdata->local->mtx);
}
kfree(assoc_data);
/* will change later if needed */
sdata->smps_mode = IEEE80211_SMPS_OFF;
+ mutex_lock(&local->mtx);
/*
* If this fails (possibly due to channel context sharing
* on incompatible channels, e.g. 80+80 and 160 sharing the
/* don't downgrade for 5 and 10 MHz channels, though. */
if (chandef.width == NL80211_CHAN_WIDTH_5 ||
chandef.width == NL80211_CHAN_WIDTH_10)
- return ret;
+ goto out;
while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
ret = ieee80211_vif_use_channel(sdata, &chandef,
IEEE80211_CHANCTX_SHARED);
}
+ out:
+ mutex_unlock(&local->mtx);
return ret;
}
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
if (WARN_ON(!chanctx_conf)) {
rcu_read_unlock();
+ sta_info_free(local, new_sta);
return -EINVAL;
}
rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
sdata->control_port_protocol = req->crypto.control_port_ethertype;
sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
+ sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
+ sdata->vif.type);
/* kick off associate process */
projects / ~andy / linux / blobdiff