#include <linux/export.h>
#include <linux/idr.h>
-
#include <linux/rfkill.h>
+#include <linux/debugfs.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
hci_sock_dev_event(hdev, event);
}
+/* ---- HCI debugfs entries ---- */
+
+static int inquiry_cache_show(struct seq_file *f, void *p)
+{
+ struct hci_dev *hdev = f->private;
+ struct discovery_state *cache = &hdev->discovery;
+ struct inquiry_entry *e;
+
+ hci_dev_lock(hdev);
+
+ list_for_each_entry(e, &cache->all, all) {
+ struct inquiry_data *data = &e->data;
+ seq_printf(f, "%pMR %d %d %d 0x%.2x%.2x%.2x 0x%.4x %d %d %u\n",
+ &data->bdaddr,
+ data->pscan_rep_mode, data->pscan_period_mode,
+ data->pscan_mode, data->dev_class[2],
+ data->dev_class[1], data->dev_class[0],
+ __le16_to_cpu(data->clock_offset),
+ data->rssi, data->ssp_mode, e->timestamp);
+ }
+
+ hci_dev_unlock(hdev);
+
+ return 0;
+}
+
+static int inquiry_cache_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, inquiry_cache_show, inode->i_private);
+}
+
+static const struct file_operations inquiry_cache_fops = {
+ .open = inquiry_cache_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/* ---- HCI requests ---- */
static void hci_req_sync_complete(struct hci_dev *hdev, u8 result)
/* Read Local Version */
hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL);
+ /* Read Local Supported Commands */
+ hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
+
+ /* Read Local Supported Features */
+ hci_req_add(req, HCI_OP_READ_LOCAL_FEATURES, 0, NULL);
+
/* Read Local AMP Info */
hci_req_add(req, HCI_OP_READ_LOCAL_AMP_INFO, 0, NULL);
/* Read Data Blk size */
hci_req_add(req, HCI_OP_READ_DATA_BLOCK_SIZE, 0, NULL);
+
+ /* Read Flow Control Mode */
+ hci_req_add(req, HCI_OP_READ_FLOW_CONTROL_MODE, 0, NULL);
+
+ /* Read Location Data */
+ hci_req_add(req, HCI_OP_READ_LOCATION_DATA, 0, NULL);
}
static void hci_init1_req(struct hci_request *req, unsigned long opt)
static void bredr_setup(struct hci_request *req)
{
+ struct hci_dev *hdev = req->hdev;
+
__le16 param;
__u8 flt_type;
/* Read Voice Setting */
hci_req_add(req, HCI_OP_READ_VOICE_SETTING, 0, NULL);
+ /* Read Number of Supported IAC */
+ hci_req_add(req, HCI_OP_READ_NUM_SUPPORTED_IAC, 0, NULL);
+
+ /* Read Current IAC LAP */
+ hci_req_add(req, HCI_OP_READ_CURRENT_IAC_LAP, 0, NULL);
+
/* Clear Event Filters */
flt_type = HCI_FLT_CLEAR_ALL;
hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type);
param = __constant_cpu_to_le16(0x7d00);
hci_req_add(req, HCI_OP_WRITE_CA_TIMEOUT, 2, ¶m);
- /* Read page scan parameters */
- if (req->hdev->hci_ver > BLUETOOTH_VER_1_1) {
+ /* AVM Berlin (31), aka "BlueFRITZ!", reports version 1.2,
+ * but it does not support page scan related HCI commands.
+ */
+ if (hdev->manufacturer != 31 && hdev->hci_ver > BLUETOOTH_VER_1_1) {
hci_req_add(req, HCI_OP_READ_PAGE_SCAN_ACTIVITY, 0, NULL);
hci_req_add(req, HCI_OP_READ_PAGE_SCAN_TYPE, 0, NULL);
}
if (hdev->commands[5] & 0x10)
hci_setup_link_policy(req);
- if (lmp_le_capable(hdev)) {
+ if (lmp_le_capable(hdev))
hci_set_le_support(req);
- hci_update_ad(req);
- }
/* Read features beyond page 1 if available */
for (p = 2; p < HCI_MAX_PAGES && p <= hdev->max_page; p++) {
if (err < 0)
return err;
- return __hci_req_sync(hdev, hci_init4_req, 0, HCI_INIT_TIMEOUT);
+ err = __hci_req_sync(hdev, hci_init4_req, 0, HCI_INIT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ /* Only create debugfs entries during the initial setup
+ * phase and not every time the controller gets powered on.
+ */
+ if (!test_bit(HCI_SETUP, &hdev->dev_flags))
+ return 0;
+
+ if (lmp_bredr_capable(hdev)) {
+ debugfs_create_file("inquiry_cache", 0444, hdev->debugfs,
+ hdev, &inquiry_cache_fops);
+ }
+
+ return 0;
}
static void hci_scan_req(struct hci_request *req, unsigned long opt)
goto done;
}
+ if (hdev->dev_type != HCI_BREDR) {
+ err = -EOPNOTSUPP;
+ goto done;
+ }
+
if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) {
err = -EOPNOTSUPP;
goto done;
return err;
}
-static u8 create_ad(struct hci_dev *hdev, u8 *ptr)
-{
- u8 ad_len = 0, flags = 0;
- size_t name_len;
-
- if (test_bit(HCI_ADVERTISING, &hdev->dev_flags))
- flags |= LE_AD_GENERAL;
-
- if (test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) {
- if (lmp_le_br_capable(hdev))
- flags |= LE_AD_SIM_LE_BREDR_CTRL;
- if (lmp_host_le_br_capable(hdev))
- flags |= LE_AD_SIM_LE_BREDR_HOST;
- } else {
- flags |= LE_AD_NO_BREDR;
- }
-
- if (flags) {
- BT_DBG("adv flags 0x%02x", flags);
-
- ptr[0] = 2;
- ptr[1] = EIR_FLAGS;
- ptr[2] = flags;
-
- ad_len += 3;
- ptr += 3;
- }
-
- if (hdev->adv_tx_power != HCI_TX_POWER_INVALID) {
- ptr[0] = 2;
- ptr[1] = EIR_TX_POWER;
- ptr[2] = (u8) hdev->adv_tx_power;
-
- ad_len += 3;
- ptr += 3;
- }
-
- name_len = strlen(hdev->dev_name);
- if (name_len > 0) {
- size_t max_len = HCI_MAX_AD_LENGTH - ad_len - 2;
-
- if (name_len > max_len) {
- name_len = max_len;
- ptr[1] = EIR_NAME_SHORT;
- } else
- ptr[1] = EIR_NAME_COMPLETE;
-
- ptr[0] = name_len + 1;
-
- memcpy(ptr + 2, hdev->dev_name, name_len);
-
- ad_len += (name_len + 2);
- ptr += (name_len + 2);
- }
-
- return ad_len;
-}
-
-void hci_update_ad(struct hci_request *req)
-{
- struct hci_dev *hdev = req->hdev;
- struct hci_cp_le_set_adv_data cp;
- u8 len;
-
- if (!lmp_le_capable(hdev))
- return;
-
- memset(&cp, 0, sizeof(cp));
-
- len = create_ad(hdev, cp.data);
-
- if (hdev->adv_data_len == len &&
- memcmp(cp.data, hdev->adv_data, len) == 0)
- return;
-
- memcpy(hdev->adv_data, cp.data, sizeof(cp.data));
- hdev->adv_data_len = len;
-
- cp.length = len;
-
- hci_req_add(req, HCI_OP_LE_SET_ADV_DATA, sizeof(cp), &cp);
-}
-
static int hci_dev_do_open(struct hci_dev *hdev)
{
int ret = 0;
goto done;
}
- /* Check for rfkill but allow the HCI setup stage to proceed
- * (which in itself doesn't cause any RF activity).
- */
- if (test_bit(HCI_RFKILLED, &hdev->dev_flags) &&
- !test_bit(HCI_SETUP, &hdev->dev_flags)) {
- ret = -ERFKILL;
- goto done;
+ if (!test_bit(HCI_SETUP, &hdev->dev_flags)) {
+ /* Check for rfkill but allow the HCI setup stage to
+ * proceed (which in itself doesn't cause any RF activity).
+ */
+ if (test_bit(HCI_RFKILLED, &hdev->dev_flags)) {
+ ret = -ERFKILL;
+ goto done;
+ }
+
+ /* Check for valid public address or a configured static
+ * random adddress, but let the HCI setup proceed to
+ * be able to determine if there is a public address
+ * or not.
+ *
+ * This check is only valid for BR/EDR controllers
+ * since AMP controllers do not have an address.
+ */
+ if (hdev->dev_type == HCI_BREDR &&
+ !bacmp(&hdev->bdaddr, BDADDR_ANY) &&
+ !bacmp(&hdev->static_addr, BDADDR_ANY)) {
+ ret = -EADDRNOTAVAIL;
+ goto done;
+ }
}
if (test_bit(HCI_UP, &hdev->flags)) {
hci_notify(hdev, HCI_DEV_UP);
if (!test_bit(HCI_SETUP, &hdev->dev_flags) &&
!test_bit(HCI_USER_CHANNEL, &hdev->dev_flags) &&
- mgmt_valid_hdev(hdev)) {
+ hdev->dev_type == HCI_BREDR) {
hci_dev_lock(hdev);
mgmt_powered(hdev, 1);
hci_dev_unlock(hdev);
if (test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags))
cancel_delayed_work(&hdev->power_off);
+ /* After this call it is guaranteed that the setup procedure
+ * has finished. This means that error conditions like RFKILL
+ * or no valid public or static random address apply.
+ */
flush_workqueue(hdev->req_workqueue);
err = hci_dev_do_open(hdev);
cancel_delayed_work(&hdev->discov_off);
hdev->discov_timeout = 0;
clear_bit(HCI_DISCOVERABLE, &hdev->dev_flags);
+ clear_bit(HCI_LIMITED_DISCOVERABLE, &hdev->dev_flags);
}
if (test_and_clear_bit(HCI_SERVICE_CACHE, &hdev->dev_flags))
skb_queue_purge(&hdev->cmd_q);
atomic_set(&hdev->cmd_cnt, 1);
if (!test_bit(HCI_RAW, &hdev->flags) &&
+ !test_bit(HCI_AUTO_OFF, &hdev->dev_flags) &&
test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) {
set_bit(HCI_INIT, &hdev->flags);
__hci_req_sync(hdev, hci_reset_req, 0, HCI_CMD_TIMEOUT);
hdev->flags = 0;
hdev->dev_flags &= ~HCI_PERSISTENT_MASK;
- if (!test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags) &&
- mgmt_valid_hdev(hdev)) {
- hci_dev_lock(hdev);
- mgmt_powered(hdev, 0);
- hci_dev_unlock(hdev);
+ if (!test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags)) {
+ if (hdev->dev_type == HCI_BREDR) {
+ hci_dev_lock(hdev);
+ mgmt_powered(hdev, 0);
+ hci_dev_unlock(hdev);
+ }
}
/* Controller radio is available but is currently powered down */
goto done;
}
+ if (hdev->dev_type != HCI_BREDR) {
+ err = -EOPNOTSUPP;
+ goto done;
+ }
+
if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) {
err = -EOPNOTSUPP;
goto done;
return;
}
- if (test_bit(HCI_RFKILLED, &hdev->dev_flags)) {
+ /* During the HCI setup phase, a few error conditions are
+ * ignored and they need to be checked now. If they are still
+ * valid, it is important to turn the device back off.
+ */
+ if (test_bit(HCI_RFKILLED, &hdev->dev_flags) ||
+ (hdev->dev_type == HCI_BREDR &&
+ !bacmp(&hdev->bdaddr, BDADDR_ANY) &&
+ !bacmp(&hdev->static_addr, BDADDR_ANY))) {
clear_bit(HCI_AUTO_OFF, &hdev->dev_flags);
hci_dev_do_close(hdev);
} else if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) {
static void hci_discov_off(struct work_struct *work)
{
struct hci_dev *hdev;
- u8 scan = SCAN_PAGE;
hdev = container_of(work, struct hci_dev, discov_off.work);
BT_DBG("%s", hdev->name);
- hci_dev_lock(hdev);
-
- hci_send_cmd(hdev, HCI_OP_WRITE_SCAN_ENABLE, sizeof(scan), &scan);
-
- hdev->discov_timeout = 0;
-
- hci_dev_unlock(hdev);
+ mgmt_discoverable_timeout(hdev);
}
int hci_uuids_clear(struct hci_dev *hdev)
hdev->pkt_type = (HCI_DM1 | HCI_DH1 | HCI_HV1);
hdev->esco_type = (ESCO_HV1);
hdev->link_mode = (HCI_LM_ACCEPT);
- hdev->io_capability = 0x03; /* No Input No Output */
+ hdev->num_iac = 0x01; /* One IAC support is mandatory */
+ hdev->io_capability = 0x03; /* No Input No Output */
hdev->inq_tx_power = HCI_TX_POWER_INVALID;
hdev->adv_tx_power = HCI_TX_POWER_INVALID;
hdev->sniff_max_interval = 800;
hdev->sniff_min_interval = 80;
+ hdev->le_scan_interval = 0x0060;
+ hdev->le_scan_window = 0x0030;
+
mutex_init(&hdev->lock);
mutex_init(&hdev->req_lock);
set_bit(HCI_RFKILLED, &hdev->dev_flags);
set_bit(HCI_SETUP, &hdev->dev_flags);
+ set_bit(HCI_AUTO_OFF, &hdev->dev_flags);
- if (hdev->dev_type != HCI_AMP) {
- set_bit(HCI_AUTO_OFF, &hdev->dev_flags);
+ if (hdev->dev_type == HCI_BREDR) {
/* Assume BR/EDR support until proven otherwise (such as
* through reading supported features during init.
*/
EXPORT_SYMBOL(hci_resume_dev);
/* Receive frame from HCI drivers */
-int hci_recv_frame(struct sk_buff *skb)
+int hci_recv_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
- struct hci_dev *hdev = (struct hci_dev *) skb->dev;
if (!hdev || (!test_bit(HCI_UP, &hdev->flags)
&& !test_bit(HCI_INIT, &hdev->flags))) {
kfree_skb(skb);
scb->expect = hlen;
scb->pkt_type = type;
- skb->dev = (void *) hdev;
hdev->reassembly[index] = skb;
}
/* Complete frame */
bt_cb(skb)->pkt_type = type;
- hci_recv_frame(skb);
+ hci_recv_frame(hdev, skb);
hdev->reassembly[index] = NULL;
return remain;
}
EXPORT_SYMBOL(hci_unregister_cb);
-static int hci_send_frame(struct sk_buff *skb)
+static void hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
- struct hci_dev *hdev = (struct hci_dev *) skb->dev;
-
- if (!hdev) {
- kfree_skb(skb);
- return -ENODEV;
- }
-
BT_DBG("%s type %d len %d", hdev->name, bt_cb(skb)->pkt_type, skb->len);
/* Time stamp */
/* Get rid of skb owner, prior to sending to the driver. */
skb_orphan(skb);
- return hdev->send(skb);
+ if (hdev->send(hdev, skb) < 0)
+ BT_ERR("%s sending frame failed", hdev->name);
}
void hci_req_init(struct hci_request *req, struct hci_dev *hdev)
BT_DBG("skb len %d", skb->len);
bt_cb(skb)->pkt_type = HCI_COMMAND_PKT;
- skb->dev = (void *) hdev;
return skb;
}
do {
skb = list; list = list->next;
- skb->dev = (void *) hdev;
bt_cb(skb)->pkt_type = HCI_ACLDATA_PKT;
hci_add_acl_hdr(skb, conn->handle, flags);
BT_DBG("%s chan %p flags 0x%4.4x", hdev->name, chan, flags);
- skb->dev = (void *) hdev;
-
hci_queue_acl(chan, &chan->data_q, skb, flags);
queue_work(hdev->workqueue, &hdev->tx_work);
skb_reset_transport_header(skb);
memcpy(skb_transport_header(skb), &hdr, HCI_SCO_HDR_SIZE);
- skb->dev = (void *) hdev;
bt_cb(skb)->pkt_type = HCI_SCODATA_PKT;
skb_queue_tail(&conn->data_q, skb);
hci_conn_enter_active_mode(chan->conn,
bt_cb(skb)->force_active);
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
hdev->acl_last_tx = jiffies;
hdev->acl_cnt--;
hci_conn_enter_active_mode(chan->conn,
bt_cb(skb)->force_active);
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
hdev->acl_last_tx = jiffies;
hdev->block_cnt -= blocks;
while (hdev->sco_cnt && (conn = hci_low_sent(hdev, SCO_LINK, "e))) {
while (quote-- && (skb = skb_dequeue(&conn->data_q))) {
BT_DBG("skb %p len %d", skb, skb->len);
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
conn->sent++;
if (conn->sent == ~0)
"e))) {
while (quote-- && (skb = skb_dequeue(&conn->data_q))) {
BT_DBG("skb %p len %d", skb, skb->len);
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
conn->sent++;
if (conn->sent == ~0)
skb = skb_dequeue(&chan->data_q);
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
hdev->le_last_tx = jiffies;
cnt--;
/* Send next queued raw (unknown type) packet */
while ((skb = skb_dequeue(&hdev->raw_q)))
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
}
/* ----- HCI RX task (incoming data processing) ----- */
hdev->sent_cmd = skb_clone(skb, GFP_KERNEL);
if (hdev->sent_cmd) {
atomic_dec(&hdev->cmd_cnt);
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
if (test_bit(HCI_RESET, &hdev->flags))
del_timer(&hdev->cmd_timer);
else
}
}
}
-
-u8 bdaddr_to_le(u8 bdaddr_type)
-{
- switch (bdaddr_type) {
- case BDADDR_LE_PUBLIC:
- return ADDR_LE_DEV_PUBLIC;
-
- default:
- /* Fallback to LE Random address type */
- return ADDR_LE_DEV_RANDOM;
- }
-}