# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit 0
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+ # Yippee, $echo works!
+ :
+else
+ # Restart under the correct shell, and then maybe $echo will work.
+ exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
# The name of this program.
progname=`$echo "$0" | sed 's%^.*/%%'`
modename="$progname"
# Constants.
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.1
+VERSION=1.2d
default_mode=
help="Try \`$progname --help' for more information."
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+ save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+ save_LANG="$LANG"; LANG=C; export LANG
+fi
if test "$LTCONFIG_VERSION" != "$VERSION"; then
echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
show="$echo"
show_help=
execute_dlfiles=
+lo2o="s/\\.lo\$/.${objext}/"
+los2o="s/\\.lo /.${objext} /g"
# Parse our command line options once, thoroughly.
while test $# -gt 0
exit 0
;;
+ --config)
+ sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
+ exit 0
+ ;;
+
+ --debug)
+ echo "$progname: enabling shell trace mode"
+ set -x
+ ;;
+
--dry-run | -n)
run=:
;;
esac
done
;;
- *db | *dbx)
+ *db | *dbx | *strace | *truss)
mode=execute
;;
*install*|cp|mv)
lastarg=
srcfile="$nonopt"
suppress_output=
+ force_static=no
+ user_target=no
for arg
do
# Accept any command-line options.
case "$arg" in
-o)
- $echo "$modename: you cannot specify the output filename with \`-o'" 1>&2
- $echo "$help" 1>&2
- exit 1
+ if test "$user_target" != "no"; then
+ $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+ exit 1
+ fi
+ user_target=next
;;
+ -force-static)
+ force_static=yes
+ continue
+ ;;
+
-static)
- build_libtool_libs=no
- build_old_libs=yes
- continue
- ;;
+ build_old_libs=yes
+ continue
+ ;;
+ esac
+
+ case "$user_target" in
+ next)
+ # The next one is the -o target name
+ user_target=yes
+ continue
+ ;;
+ yes)
+ # We got the output file
+ user_target=set
+ libobj="$arg"
+ continue
+ ;;
esac
# Accept the current argument as the source file.
# sets, so we specify it separately.
case "$lastarg" in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- lastarg="\"$lastarg\""
- ;;
+ lastarg="\"$lastarg\""
+ ;;
esac
# Add the previous argument to base_compile.
if test -z "$base_compile"; then
- base_compile="$lastarg"
+ base_compile="$lastarg"
else
- base_compile="$base_compile $lastarg"
+ base_compile="$base_compile $lastarg"
fi
done
- # Get the name of the library object.
- libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+ case "$user_target" in
+ set)
+ ;;
+ no)
+ # Get the name of the library object.
+ libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+ ;;
+ *)
+ $echo "$modename: you must specify a target with \`-o'" 1>&2
+ exit 1
+ ;;
+ esac
# Recognize several different file suffixes.
- xform='[cCFSfms]'
+ # If the user specifies -o file.o, it is replaced with file.lo
+ xform='[cCFSfmso]'
case "$libobj" in
*.ada) xform=ada ;;
*.adb) xform=adb ;;
libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
case "$libobj" in
- *.lo) obj=`$echo "X$libobj" | $Xsed -e 's/\.lo$/.o/'` ;;
+ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
*)
- $echo "$modename: cannot determine name of library object from \`$srcfile'" 1>&2
+ $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
exit 1
;;
esac
# Delete any leftover library objects.
if test "$build_old_libs" = yes; then
- $run $rm $obj $libobj
- trap "$run $rm $obj $libobj; exit 1" 1 2 15
+ removelist="$obj $libobj $lockfile"
+ else
+ removelist="$libobj $lockfile"
+ fi
+
+ $run $rm $removelist
+ trap "$run $rm $removelist; exit 1" 1 2 15
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ removelist="$removelist $output_obj $lockfile"
+ trap "$run $rm $removelist; exit 1" 1 2 15
else
- $run $rm $libobj
- trap "$run $rm $libobj; exit 1" 1 2 15
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until ln "$0" "$lockfile" 2>/dev/null; do
+ $show "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $run $rm $removelist
+ exit 1
+ fi
+ echo $srcfile > "$lockfile"
+ fi
+
+ if test -n "$fix_srcfile_path"; then
+ eval srcfile=\"$fix_srcfile_path\"
fi
# Only build a PIC object if we are building libtool libraries.
fbsd_hideous_sh_bug=$base_compile
# All platforms use -DPIC, to notify preprocessed assembler code.
- $show "$base_compile$pic_flag -DPIC $srcfile"
- if $run eval "$base_compile\$pic_flag -DPIC \$srcfile"; then :
+ command="$base_compile$pic_flag -DPIC $srcfile"
+ if test "$compiler_o_lo" = yes; then
+ command="$command -o $libobj"
+ output_obj="$libobj"
+ elif test "$compiler_c_o" = yes; then
+ command="$command -o $obj"
+ output_obj="$obj"
+ fi
+
+ $show "$command"
+ if $run eval "$command"; then :
else
- test -n "$obj" && $run $rm $obj
+ test -n "$output_obj" && $run $rm $removelist
exit 1
fi
- # If we have no pic_flag, then copy the object into place and finish.
- if test -z "$pic_flag"; then
- $show "$LN_S $obj $libobj"
- $run $LN_S $obj $libobj
- exit $?
+ if test "$need_locks" = warn &&
+ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+ echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $run $rm $removelist
+ exit 1
fi
- # Just move the object, then go on to compile the next one
- $show "$mv $obj $libobj"
- $run $mv $obj $libobj || exit 1
+ # Just move the object if needed, then go on to compile the next one
+ if test "$compiler_o_lo" = no && test x"$output_obj" != x"$libobj"; then
+ $show "$mv $output_obj $libobj"
+ if $run $mv $output_obj $libobj; then :
+ else
+ error=$?
+ $run $rm $removelist
+ exit $error
+ fi
+ fi
+
+ # If we have no pic_flag and do not have -force-static,
+ # then copy the object into place and finish.
+ if test -z "$pic_flag" && test "$force_static" = no; then
+ $show "$LN_S $libobj $obj"
+ if $run $LN_S $libobj $obj; then
+ exit 0
+ else
+ error=$?
+ $run $rm $removelist
+ exit $error
+ fi
+ fi
# Allow error messages only from the first compilation.
suppress_output=' >/dev/null 2>&1'
# Only build a position-dependent object if we build old libraries.
if test "$build_old_libs" = yes; then
+ command="$base_compile $srcfile"
+ if test "$force_static" = yes; then
+ command="$command -DLIBTOOL_STATIC"
+ fi
+ if test "$compiler_c_o" = yes; then
+ command="$command -o $obj"
+ output_obj="$obj"
+ fi
+
# Suppress compiler output if we already did a PIC compilation.
- $show "$base_compile $srcfile$suppress_output"
- if $run eval "$base_compile \$srcfile$suppress_output"; then :
+ command="$command$suppress_output"
+ $show "$command"
+ if $run eval "$command"; then :
else
- $run $rm $obj $libobj
+ $run $rm $removelist
exit 1
fi
+
+ if test "$need_locks" = warn &&
+ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+ echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $run $rm $removelist
+ exit 1
+ fi
+
+ # Just move the object if needed
+ if test "$compiler_c_o" = no && test x"$output_obj" != x"$obj"; then
+ $show "$mv $output_obj $obj"
+ if $run $mv $output_obj $obj; then :
+ else
+ error=$?
+ $run $rm $removelist
+ exit $error
+ fi
+ fi
+ fi
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ $rm "$lockfile"
fi
# Create an invalid libtool object if no PIC, so that we do not
# libtool link mode
link)
modename="$modename: link"
+ C_compiler="$CC" # save it, to compile generated C sources
CC="$nonopt"
allow_undefined=yes
compile_command="$CC"
compile_shlibpath=
finalize_shlibpath=
+ convenience=
+ old_convenience=
deplibs=
+ eval lib_search_path=\"$sys_lib_search_path\"
+
dlfiles=
dlprefiles=
export_dynamic=no
+ export_symbols=
+ generated=
hardcode_libdirs=
libobjs=
link_against_libtool_libs=
ltlibs=
+ module=no
objs=
prev=
prevarg=
test -n "$old_archive_from_new_cmds" && build_old_libs=yes
# Go through the arguments, transforming them on the way.
- for arg
- do
+ while test $# -gt 0; do
+ arg="$1"
+ shift
+
# If the previous option needs an argument, assign it.
if test -n "$prev"; then
case "$prev" in
;;
esac
;;
+ exportsyms)
+ export_symbols="$arg"
+ if test ! -f "$arg"; then
+ $echo "$modename: symbol file \`$arg' does not exist"
+ exit 1
+ fi
+ prev=
+ ;;
release)
release="-$arg"
prev=
if test "$export_dynamic" != yes; then
export_dynamic=yes
if test -n "$export_dynamic_flag_spec"; then
- arg=`eval \\$echo "$export_dynamic_flag_spec"`
+ eval arg=\"$export_dynamic_flag_spec\"
else
arg=
fi
fi
;;
+ -export-symbols)
+ if test -n "$export_symbols"; then
+ $echo "$modename: cannot have more than one -exported-symbols"
+ exit 1
+ fi
+ prev=exportsyms
+ continue
+ ;;
+
-L*)
dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'`
case "$dir" in
- /* | [A-Za-z]:\\*)
+ /* | [A-Za-z]:[/\\]*)
# Add the corresponding hardcode_libdir_flag, if it is not identical.
;;
*)
;;
esac
deplibs="$deplibs $arg"
+ lib_search_path="$lib_search_path `expr $arg : '-L\(.*\)'`"
;;
-l*) deplibs="$deplibs $arg" ;;
+ -module)
+ if test "$module" != yes; then
+ module=yes
+ if test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ else
+ arg=
+ fi
+ fi
+ ;;
+
-no-undefined)
allow_undefined=no
continue
esac
;;
- *.o | *.a)
+ *.o | *.obj | *.a | *.lib)
# A standard object.
objs="$objs $arg"
;;
if test "$prev" = dlprefiles; then
# Preload the old-style object.
- dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e 's/\.lo$/\.o/'`
+ dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
prev=
fi
libobjs="$libobjs $arg"
old_library=
# Check to see that this really is a libtool archive.
- if (sed -e '2q' $arg | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
+ if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
exit 1
fi
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variable installed.
+ installed=yes
+
# If there is no directory component, then add one.
case "$arg" in
*/* | *\\*) . $arg ;;
*) . ./$arg ;;
esac
- if test -z "$libdir"; then
- $echo "$modename: \`$arg' contains no -rpath information" 1>&2
- exit 1
- fi
-
# Get the name of the library we link against.
linklib=
for l in $old_library $library_names; do
# Find the relevant object directory and library name.
name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
- dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$arg"; then
- dir="$objdir"
- else
- dir="$dir/$objdir"
- fi
+
+ if test "X$installed" = Xyes; then
+ dir="$libdir"
+ else
+ dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$dir" = "X$arg"; then
+ dir="$objdir"
+ else
+ dir="$dir/$objdir"
+ fi
+ fi
+
+ if test -z "$libdir"; then
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $dir/$old_library"
+ old_convenience="$old_convenience $dir/$old_library"
+ deplibs="$deplibs$dependency_libs"
+ compile_command="$compile_command $dir/$old_library$dependency_libs"
+ finalize_command="$finalize_command $dir/$old_library$dependency_libs"
+ continue
+ fi
# This library was specified with -dlopen.
if test "$prev" = dlfiles; then
dlfiles="$dlfiles $arg"
- if test -z "$dlname"; then
- # If there is no dlname, we need to preload.
+ if test -z "$dlname" || test "$build_libtool_libs" = no; then
+ # If there is no dlname or we're linking statically,
+ # we need to preload.
prev=dlprefiles
else
# We should not create a dependency on this library, but we
fi
if test -n "$libdir"; then
- flag=`eval \\$echo \"$hardcode_libdir_flag_spec\"`
+ eval flag=\"$hardcode_libdir_flag_spec\"
compile_command="$compile_command $flag"
finalize_command="$finalize_command $flag"
fi
+ lib_linked=yes
case "$hardcode_action" in
- immediate)
+ immediate | unsupported)
if test "$hardcode_direct" = no; then
compile_command="$compile_command $dir/$linklib"
elif test "$hardcode_minus_L" = no; then
+ case "$host" in
+ *-*-sunos*)
+ compile_shlibpath="$compile_shlibpath$dir:"
+ ;;
+ esac
compile_command="$compile_command -L$dir -l$name"
elif test "$hardcode_shlibpath_var" = no; then
compile_shlibpath="$compile_shlibpath$dir:"
compile_command="$compile_command -l$name"
+ else
+ lib_linked=no
fi
;;
relink)
# We need an absolute path.
case "$dir" in
- /* | [A-Za-z]:\\*) ;;
+ /* | [A-Za-z]:[/\\]*) ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
elif test "$hardcode_shlibpath_var" = yes; then
compile_shlibpath="$compile_shlibpath$dir:"
compile_command="$compile_command -l$name"
+ else
+ lib_linked=no
fi
;;
- *)
- $echo "$modename: \`$hardcode_action' is an unknown hardcode action" 1>&2
- exit 1
- ;;
+ *)
+ lib_linked=no
+ ;;
esac
+ if test "$lib_linked" != yes; then
+ $echo "$modename: configuration error: unsupported hardcode properties"
+ exit 1
+ fi
+
# Finalize command for both is simple: just hardcode it.
if test "$hardcode_direct" = yes; then
finalize_command="$finalize_command $libdir/$linklib"
exit 1
fi
- if test -n "$vinfo" && test -n "$release"; then
- $echo "$modename: you cannot specify both \`-version-info' and \`-release'" 1>&2
- $echo "$help" 1>&2
+ if test -n "$export_symbols" && test "$module" = yes; then
+ $echo "$modename: \`-export-symbols' is not supported for modules"
exit 1
fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
- oldlib=
- oldobjs=
case "$output" in
"")
$echo "$modename: you must specify an output file" 1>&2
exit 1
;;
- */* | *\\*)
- $echo "$modename: output file \`$output' must have no directory components" 1>&2
- exit 1
- ;;
+ *.a | *.lib)
+ if test -n "$link_against_libtool_libs"; then
+ $echo "$modename: error: cannot link libtool libraries into archives" 1>&2
+ exit 1
+ fi
+
+ if test -n "$deplibs"; then
+ $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+ fi
+
+ if test -n "$dlfiles$dlprefiles"; then
+ $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$rpath"; then
+ $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$export_symbols"; then
+ $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+ fi
- *.a)
# Now set the variables for building old libraries.
build_libtool_libs=no
- build_old_libs=yes
- oldlib="$output"
- $show "$rm $oldlib"
- $run $rm $oldlib
+ oldlibs="$output"
;;
*.la)
# Make sure we only generate libraries of the form `libNAME.la'.
- case "$output" in
+ case "$outputname" in
lib*) ;;
*)
- $echo "$modename: libtool library \`$arg' must begin with \`lib'" 1>&2
+ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
$echo "$help" 1>&2
exit 1
;;
esac
- name=`$echo "X$output" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
- libname=`eval \\$echo \"$libname_spec\"`
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+ eval libname=\"$libname_spec\"
+
+ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$output_objdir" = "X$output"; then
+ output_objdir="$objdir"
+ else
+ output_objdir="$output_objdir/$objdir"
+ fi
# All the library-specific variables (install_libdir is set above).
library_names=
old_library=
dlname=
- current=0
- revision=0
- age=0
if test -n "$objs"; then
$echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
# How the heck are we supposed to write a wrapper for a shared library?
if test -n "$link_against_libtool_libs"; then
- $echo "$modename: libtool library \`$output' may not depend on uninstalled libraries:$link_against_libtool_libs" 1>&2
+ $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
exit 1
fi
if test -n "$dlfiles$dlprefiles"; then
- $echo "$modename: warning: \`-dlopen' is ignored while creating libtool libraries" 1>&2
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
- fi
-
- if test -z "$rpath"; then
- $echo "$modename: you must specify an installation directory with \`-rpath'" 1>&2
- $echo "$help" 1>&2
- exit 1
+ $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
fi
set dummy $rpath
fi
install_libdir="$2"
- # Parse the version information argument.
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
- set dummy $vinfo
- IFS="$save_ifs"
+ oldlibs=
+ if test -z "$rpath"; then
+ # Building a libtool convenience library.
+ libext=al
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ dependency_libs="$deplibs"
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+ fi
- if test -n "$5"; then
- $echo "$modename: too many parameters to \`-version-info'" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+ fi
+ else
- test -n "$2" && current="$2"
- test -n "$3" && revision="$3"
- test -n "$4" && age="$4"
+ # Parse the version information argument.
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ IFS="$save_ifs"
- # Check that each of the things are valid numbers.
- case "$current" in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
+ if test -n "$8"; then
+ $echo "$modename: too many parameters to \`-version-info'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
- case "$revision" in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
+ current="$2"
+ revision="$3"
+ age="$4"
- case "$age" in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
+ # Check that each of the things are valid numbers.
+ case "$current" in
+ 0 | [1-9] | [1-9][0-9]*) ;;
+ *)
+ $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
- if test $age -gt $current; then
- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- fi
+ case "$revision" in
+ 0 | [1-9] | [1-9][0-9]*) ;;
+ *)
+ $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
- # Calculate the version variables.
- version_vars="version_type current age revision"
- case "$version_type" in
- none) ;;
+ case "$age" in
+ 0 | [1-9] | [1-9][0-9]*) ;;
+ *)
+ $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
- linux)
- version_vars="$version_vars major versuffix"
- major=`expr $current - $age`
- versuffix="$major.$age.$revision"
- ;;
+ if test $age -gt $current; then
+ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ fi
- osf)
- version_vars="$version_vars versuffix verstring"
- major=`expr $current - $age`
- versuffix="$current.$age.$revision"
- verstring="$versuffix"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test $loop != 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring:${iface}.0"
- done
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case "$version_type" in
+ none) ;;
- # Make executables depend on our current version.
- verstring="$verstring:${current}.0"
- ;;
+ linux)
+ major=.`expr $current - $age`
+ versuffix="$major.$age.$revision"
+ ;;
- sunos)
- version_vars="$version_vars major versuffix"
- major="$current"
- versuffix="$current.$revision"
- ;;
+ osf)
+ major=`expr $current - $age`
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test $loop != 0; do
+ iface=`expr $current - $loop`
+ loop=`expr $loop - 1`
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ verstring="$verstring:${current}.0"
+ ;;
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
- ;;
- esac
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
- # Create the output directory, or remove our outputs if we need to.
- if test -d $objdir; then
- $show "$rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*"
- $run $rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*
- else
- $show "$mkdir $objdir"
- $run $mkdir $objdir
- status=$?
- if test $status -eq 0 || test -d $objdir; then :
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current";
+ ;;
+
+ windows)
+ # Like Linux, but with '-' rather than '.', since we only
+ # want one extension on Windows 95.
+ major=`expr $current - $age`
+ versuffix="-$major-$age-$revision"
+ ;;
+
+ *)
+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit 1
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ versuffix=
+ verstring="0.0"
+ case "$host" in
+ *-*-sunos*)
+ versuffix=".0.0"
+ ;;
+ esac
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
else
- exit $status
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
fi
+
+ # Add libc to deplibs on all systems.
+ dependency_libs="$deplibs"
+ deplibs="$deplibs -lc"
fi
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
- build_libtool_libs=no
- build_old_libs=yes
- fi
+ # Create the output directory, or remove our outputs if we need to.
+ if test -d $output_objdir; then
+ $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
+ $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
else
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
+ $show "$mkdir $output_objdir"
+ $run $mkdir $output_objdir
+ status=$?
+ if test $status -ne 0 && test ! -d $output_objdir; then
+ exit $status
+ fi
fi
- # Add libc to deplibs on all systems.
- dependency_libs="$deplibs"
- deplibs="$deplibs -lc"
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.'${libext}' //g' -e "$los2o" -e 's/ $//g'`
+ fi
if test "$build_libtool_libs" = yes; then
- # Get the real and link names of the library.
- library_names=`eval \\$echo \"$library_names_spec\"`
- set dummy $library_names
- realname="$2"
- shift; shift
-
- if test -n "$soname_spec"; then
- soname=`eval \\$echo \"$soname_spec\"`
- else
- soname="$realname"
- fi
+ # Transform deplibs into only deplibs that can be linked in shared.
+ ## Gordon: Do you check for the existence of the libraries in deplibs
+ ## on the system? That should maybe be merged in here someplace....
+ ## Actually: I think test_compile and file_magic do this... file_regex
+ ## sorta does this. Only pas_all needs to be changed. -Toshio
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ case "$check_shared_deplibs_method" in
+ pass_all)
+ newdeplibs=$deplibs
+ ;; # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behaviour.
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $rm conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $rm a.out
+ $C_compiler conftest.c $deplibs
+ if test $? -eq 0 ; then
+ ldd_output=`ldd a.out`
+ for i in $deplibs; do
+ name="`expr $i : '-l\(.*\)'`"
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" ; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
+ set dummy $deplib_matches
+ deplib_match=$2
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ echo
+ echo "*** Warning: This library needs some functionality provided by $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ fi
+ else
+ newdeplibs="$newdeplibs $i"
+ fi
+ done
+ else
+ # Error occured in the first compile. Let's try to salvage the situation:
+ # Compile a seperate program for each library.
+ for i in $deplibs; do
+ name="`expr $i : '-l\(.*\)'`"
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" ; then
+ $rm a.out
+ $C_compiler conftest.c $i
+ # Did it work?
+ if test $? -eq 0 ; then
+ ldd_output=`ldd a.out`
+ libname=`eval \\$echo \"$libname_spec\"`
+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
+ set dummy $deplib_matches
+ deplib_match=$2
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ echo
+ echo "*** Warning: This library needs some functionality provided by $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ fi
+ else
+ echo
+ echo "*** Warning! Library $i is needed by this library but I was not able to"
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
+ fi
+ else
+ newdeplibs="$newdeplibs $i"
+ fi
+ done
+ fi
+ deplibs=$newdeplibs
+ ;;
+ file_magic* | file_regex)
+ set dummy $check_shared_deplibs_method
+ file_magic_regex="`expr \"$check_shared_deplibs_method\" : \"$2\(.*\)\"`"
+ for a_deplib in $deplibs; do
+ name="`expr $a_deplib : '-l\(.*\)'`"
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" ; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ case "$check_shared_deplibs_method" in
+ file_magic*)
+ for i in $lib_search_path; do
+ # This needs to be more general than file_regex in order to
+ # catch things like glibc on linux. Maybe file_regex
+ # should be more general as well, but maybe not. Since
+ # library names are supposed to conform to
+ # library_name_spec, I think file_regex should remain
+ # strict. What do you think Gordon?
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+
+ if (file "$potent_lib" | sed '11,$d' | egrep "$file_magic_regex") > /dev/null ; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ ;;
+ file_regex)
+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
+ set dummy $deplib_matches
+ deplib_match=$2
+ for i in $lib_search_path; do
+ potential_libs=`ls $i/$deplib_match* 2>/dev/null`
+ if test "$potential_libs" != "" ; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break
+ fi
+ done
+ ;;
+ esac
+ if test "$a_deplib" != "" ; then
+ echo
+ echo "*** Warning: This library needs some functionality provided by $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ fi
+ else
+ # Add a -L argument.
+ newdeplibs="$newdeplibs $a_deplib"
+ fi
+ done # Gone through all deplibs.
+ ;;
+ none | *) deplibs="" ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+ deplibs=$newdeplibs
+ # Done checking deplibs!
+
+ # Get the real and link names of the library.
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ realname="$2"
+ shift; shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
- lib="$objdir/$realname"
+ lib="$output_objdir/$realname"
for link
do
linknames="$linknames $link"
done
- # Use standard objects if they are PIC.
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//g'`
+ # Use standard objects if they are PIC.
+ test -z "$pic_flag" && libobjs=`$echo "X$libobjs " | $Xsed -e "$los2o" -e 's/ $//g'`
- # Do each of the archive commands.
- cmds=`eval \\$echo \"$archive_cmds\"`
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
+ if test -n "$whole_archive_flag_spec"; then
+ if test -n "$convenience"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ fi
+ else
+ for xlib in $convenience; do
+ # Extract the objects.
+ xdir="$xlib"x
+ generated="$generated $xdir"
+ xlib=`echo "$xlib" | $Xsed -e 's%^.*/%%'`
+
+ $show "${rm}r $xdir"
+ $run ${rm}r "$xdir"
+ $show "mkdir $xdir"
+ $run mkdir "$xdir"
+ status=$?
+ if test $status -ne 0 && test ! -d "$xdir"; then
+ exit $status
+ fi
+ $show "(cd $xdir && $AR x ../$xlib)"
+ $run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $?
- # Create links to the real library.
- for linkname in $linknames; do
- $show "(cd $objdir && $LN_S $realname $linkname)"
- $run eval '(cd $objdir && $LN_S $realname $linkname)' || exit $?
- done
+ libobjs="$libobjs `echo $xdir/*`"
+ done
+ fi
- # If -export-dynamic was specified, set the dlname.
- if test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
- fi
+ # Do each of the archive commands.
+ if test -n "$export_symbols" && test -n "$archive_sym_cmds"; then
+ eval cmds=\"$archive_sym_cmds\"
+ else
+ eval cmds=\"$archive_cmds\"
+ fi
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
- # Now set the variables for building old libraries.
- oldlib="$objdir/$libname.a"
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+ $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
;;
- *.lo | *.o)
+ *.lo | *.o | *.obj)
if test -n "$link_against_libtool_libs"; then
- $echo "$modename: error: cannot link libtool libraries into reloadable objects" 1>&2
+ $echo "$modename: error: cannot link libtool libraries into objects" 1>&2
exit 1
fi
if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored while creating objects" 1>&2
+ $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
fi
if test -n "$dlfiles$dlprefiles"; then
- $echo "$modename: warning: \`-dlopen' is ignored while creating objects" 1>&2
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
fi
if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored while creating objects" 1>&2
+ $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
fi
if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored while creating objects" 1>&2
+ $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
fi
if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2
+ $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
fi
case "$output" in
exit 1
fi
libobj="$output"
- obj=`$echo "X$output" | $Xsed -e 's/\.lo$/.o/'`
+ obj=`$echo "X$output" | $Xsed -e "$lo2o"`
;;
*)
libobj=
$run $rm $obj $libobj
# Create the old-style object.
- reload_objs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'`
+ reload_objs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.'${libext}' //g' -e 's/[^ ]*\.lib //g' -e "$los2o" -e 's/ $//g'`
output="$obj"
- cmds=`eval \\$echo \"$reload_cmds\"`
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ eval cmds=\"$reload_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs"
output="$libobj"
- cmds=`eval \\$echo \"$reload_cmds\"`
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ eval cmds=\"$reload_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
else
# Just create a symlink.
$show "$LN_S $obj $libobj"
- $run $LN_S $obj $libobj || exit 1
+ $run $LN_S $obj $libobj || exit $?
fi
exit 0
;;
+ # Anything else should be a program.
*)
if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored while linking programs" 1>&2
+ $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
fi
if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2
+ $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
fi
if test -n "$rpath"; then
fi
if test -n "$libdir"; then
- flag=`eval \\$echo \"$hardcode_libdir_flag_spec\"`
+ eval flag=\"$hardcode_libdir_flag_spec\"
compile_command="$compile_command $flag"
finalize_command="$finalize_command $flag"
finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
fi
+ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$output_objdir" = "X$output"; then
+ output_objdir="$objdir"
+ else
+ output_objdir="$output_objdir/$objdir"
+ fi
+
if test -n "$libobjs" && test "$build_old_libs" = yes; then
# Transform all the library objects into standard objects.
- compile_command=`$echo "X$compile_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
- finalize_command=`$echo "X$finalize_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
+ compile_command=`$echo "X$compile_command " | $Xsed -e "$los2o" -e 's/ $//'`
+ finalize_command=`$echo "X$finalize_command " | $Xsed -e "$los2o" -e 's/ $//'`
fi
if test "$export_dynamic" = yes && test -n "$NM" && test -n "$global_symbol_pipe"; then
- dlsyms="${output}S.c"
+ dlsyms="${outputname}S.c"
else
dlsyms=
fi
if test -n "$dlsyms"; then
- # Add our own program objects to the preloaded list.
- dlprefiles=`$echo "X$objs$dlprefiles " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
+ case "$dlsyms" in
+ "") ;;
+ *.c)
+ if test -z "$export_symbols"; then
+ # Add our own program objects to the preloaded list.
+ dlprefiles=`$echo "X$objs$dlprefiles " | $Xsed -e "$los2o" -e 's/ $//'`
+ fi
- # Discover the nlist of each of the dlfiles.
- nlist="$objdir/${output}.nm"
+ # Discover the nlist of each of the dlfiles.
+ nlist="$objdir/${output}.nm"
- if test -d $objdir; then
- $show "$rm $nlist ${nlist}T"
- $run $rm "$nlist" "${nlist}T"
- else
- $show "$mkdir $objdir"
- $run $mkdir $objdir
- status=$?
- if test $status -eq 0 || test -d $objdir; then :
+ if test -d $objdir; then
+ $show "$rm $nlist ${nlist}T"
+ $run $rm "$nlist" "${nlist}T"
else
- exit $status
+ $show "$mkdir $objdir"
+ $run $mkdir $objdir
+ status=$?
+ if test $status -ne 0 && test ! -d $objdir; then
+ exit $status
+ fi
fi
- fi
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
- # Parse the name list into a source file.
- $show "creating $objdir/$dlsyms"
- if test -z "$run"; then
- # Make sure we at least have an empty file.
- test -f "$nlist" || : > "$nlist"
-
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- wcout=`wc "$nlist" 2>/dev/null`
- count=`echo "X$wcout" | $Xsed -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'`
- (test "$count" -ge 0) 2>/dev/null || count=-1
- else
- $rm "$nlist"T
- count=-1
- fi
+ # Parse the name list into a source file.
+ $show "creating $objdir/$dlsyms"
- case "$dlsyms" in
- "") ;;
- *.c)
- $echo > "$objdir/$dlsyms" \
-"/* $dlsyms - symbol resolution table for \`$output' dlsym emulation. */
+ $echo > "$objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
/* Generated by $PROGRAM - GNU $PACKAGE $VERSION */
#ifdef __cplusplus
#endif
/* Prevent the only kind of declaration conflicts we can make. */
-#define dld_preloaded_symbol_count some_other_symbol
#define dld_preloaded_symbols some_other_symbol
-/* External symbol declarations for the compiler. */"
+/* External symbol declarations for the compiler. */\
+"
- if test -f "$nlist"; then
- sed -e 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> "$objdir/$dlsyms"
+ if test -n "$export_symbols"; then
+ sed -e 's/^\(.*\)/\1 \1/' < "$export_symbols" > "$nlist"
+ fi
+
+ for arg in $dlprefiles; do
+ $show "extracting global C symbols from \`$arg'"
+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -z "$run"; then
+ # Make sure we at least have an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
else
- echo '/* NONE */' >> "$objdir/$dlsyms"
-EOF
+ $rm "$nlist"T
fi
- $echo >> "$objdir/$dlsyms" \
-"
-#undef dld_preloaded_symbol_count
+ if test -f "$nlist"; then
+ sed -e 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> "$output_objdir/$dlsyms"
+ else
+ echo '/* NONE */' >> "$output_objdir/$dlsyms"
+ fi
+
+ $echo >> "$output_objdir/$dlsyms" "\
+
#undef dld_preloaded_symbols
#if defined (__STDC__) && __STDC__
# define __ptr_t char *
#endif
-/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */
-int dld_preloaded_symbol_count = $count;
-
/* The mapping between symbol names and symbols. */
struct {
char *name;
__ptr_t address;
}
dld_preloaded_symbols[] =
-{"
+{\
+"
+
+ if test -n "$export_symbols"; then
+ echo >> "$objdir/$dlsyms" "\
+ {\"${output}\", (__ptr_t) 0},"
+ sed 's/^\(.*\)/ {"\1", (__ptr_t) \&\1},/' < "$export_symbols" >> "$objdir/$dlsyms"
+ fi
+
+ for arg in $dlprefiles; do
+ name=`echo "$arg" | sed -e 's%^.*/%%'`
+ echo >> "$objdir/$dlsyms" "\
+ {\"$name\", (__ptr_t) 0},"
+ eval "$NM $arg | $global_symbol_pipe > '$nlist'"
+
+ if test -f "$nlist"; then
+ sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$nlist" >> "$objdir/$dlsyms"
+ else
+ echo '/* NONE */' >> "$output_objdir/$dlsyms"
+ fi
+
+ done
if test -f "$nlist"; then
- sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$nlist" >> "$objdir/$dlsyms"
+ sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$nlist" >> "$output_objdir/$dlsyms"
fi
- $echo >> "$objdir/$dlsyms" \
-" {0, (__ptr_t) 0}
+ $echo >> "$output_objdir/$dlsyms" "\
+ {0, (__ptr_t) 0}
};
#ifdef __cplusplus
}
-#endif"
- ;;
-
- *)
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
- exit 1
- ;;
- esac
- fi
+#endif\
+"
+ fi
- # Now compile the dynamic symbol file.
- $show "(cd $objdir && $CC -c$no_builtin_flag \"$dlsyms\")"
- $run eval '(cd $objdir && $CC -c$no_builtin_flag "$dlsyms")' || exit $?
+ # Now compile the dynamic symbol file.
+ $show "(cd $objdir && $C_compiler -c$no_builtin_flag \"$dlsyms\")"
+ $run eval '(cd $objdir && $C_compiler -c$no_builtin_flag "$dlsyms")' || exit $?
- # Transform the symbol file into the correct name.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"`
+ # Transform the symbol file into the correct name.
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"`
+ ;;
+ *)
+ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+ exit 1
+ ;;
+ esac
elif test "$export_dynamic" != yes; then
test -n "$dlfiles$dlprefiles" && $echo "$modename: warning: \`-dlopen' and \`-dlpreopen' are ignored without \`-export-dynamic'" 1>&2
else
fi
# Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'%g'`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'T%g'`
+ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'T%g'`
# Create the binary in the object directory, then wrap it.
- if test -d $objdir; then :
- else
- $show "$mkdir $objdir"
- $run $mkdir $objdir
+ if test ! -d $output_objdir; then
+ $show "$mkdir $output_objdir"
+ $run $mkdir $output_objdir
status=$?
- if test $status -eq 0 || test -d $objdir; then :
- else
+ if test $status -ne 0 && test ! -d $objdir; then
exit $status
fi
fi
rpath=
for dir in $temp_rpath; do
case "$dir" in
- /* | [A-Za-z]:\\*)
+ /* | [A-Za-z]:[/\\]*)
# Absolute path.
rpath="$rpath$dir:"
;;
finalize_command="$runpath_var=\"$rpath\$$runpath_var\" $finalize_command"
fi
- case "$hardcode_action" in
- relink)
+ if test "$hardcode_action" = relink; then
# AGH! Flame the AIX and HP-UX people for me, will ya?
- $echo "$modename: warning: using a buggy system linker" 1>&2
- $echo "$modename: relinking will be required before \`$output' can be installed" 1>&2
- ;;
- esac
+ $echo "$modename: warning: this platform doesn\'t like uninstalled shared libraries" 1>&2
+ $echo "$modename: \`$output' will be relinked during installation" 1>&2
+ fi
$show "$compile_command"
$run eval "$compile_command" || exit $?
finalize_command=`$echo "X$finalize_command" | $Xsed -e "$sed_quote_subst"`
# Quote $echo for shipping.
- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+ if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+ case "$0" in
+ /* | [A-Za-z]:[/\\]*) qecho="$SHELL $0 --fallback-echo";;
+ *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+ esac
+ qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+ else
+ qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+ fi
# Only actually do things if our run command is non-null.
if test -z "$run"; then
$rm $output
trap "$rm $output; exit 1" 1 2 15
- $echo > $output \
-"#! /bin/sh
+ $echo > $output "\
+#! $SHELL
-# $output - temporary wrapper script for $objdir/$output
-# Generated by ltmain.sh - GNU $PACKAGE $VERSION
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
#
-# This wrapper script should never be moved out of \``pwd`'.
+# This wrapper script should never be moved out of the build directory.
# If it is, it will not operate correctly.
# Sed substitution that helps us do robust quoting. It backslashifies
if test \"\$libtool_install_magic\" = \"$magic\"; then
# install mode needs the following variables:
link_against_libtool_libs='$link_against_libtool_libs'
- finalize_command=\"$finalize_command\"
+ finalize_command=\"cd `pwd | sed -e $sed_quote_subst`; $finalize_command\"
else
# When we are sourced in execute mode, \$file and \$echo are already set.
- if test \"\$libtool_execute_magic\" = \"$magic\"; then :
- else
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
echo=\"$qecho\"
file=\"\$0\"
- fi
+ # Make sure echo works.
+ if test \"X\$1\" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+ elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+ # Yippee, \$echo works!
+ :
+ else
+ # Restart under the correct shell, and then maybe \$echo will work.
+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+ fi
+ fi\
+"
+ $echo >> $output "\
# Find the directory that this script lives in.
thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
# If there was a directory component, then change thisdir.
if test \"x\$destdir\" != \"x\$file\"; then
case \"\$destdir\" in
- /* | [A-Za-z]:\\*) thisdir=\"\$destdir\" ;;
+ /* | [A-Za-z]:[/\\]*) thisdir=\"\$destdir\" ;;
*) thisdir=\"\$thisdir/\$destdir\" ;;
esac
fi
test -n \"\$absdir\" && thisdir=\"\$absdir\"
progdir=\"\$thisdir/$objdir\"
- program='$output'
+ program='$outputname'
if test -f \"\$progdir/\$program\"; then"
# Export our shlibpath_var if we have one.
if test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $echo >> $output \
-" # Add our own library path to $shlibpath_var
+ $echo >> $output "\
+ # Add our own library path to $shlibpath_var
$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
# Some systems cannot cope with colon-terminated $shlibpath_var
"
fi
- echo >> $output \
-" if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ $echo >> $output "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
# Run the actual program with our arguments.
- args=
- for arg
- do
- # Quote arguments (to preserve shell metacharacters).
- arg=\`\$echo \"X\$arg\" | \$Xsed -e \"\$sed_quote_subst\"\`
- args=\"\$args \\\"\$arg\\\"\"
- done
# Export the path to the program.
PATH=\"\$progdir:\$PATH\"
export PATH
- eval \"exec \$program \$args\"
+ exec \$program \${1+\"\$@\"}
- \$echo \"\$0: cannot exec \$program \$args\"
+ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
exit 1
fi
else
echo \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
fi
-fi"
+fi\
+"
chmod +x $output
fi
exit 0
esac
# See if we need to build an old-fashioned archive.
- if test "$build_old_libs" = "yes"; then
- # Transform .lo files to .o files.
- oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'`
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.'${libext}' //g' -e 's/[^ ]*\.lib //g' -e "$los2o" -e 's/ $//g'`
+ addlibs="$old_convenience"
+ fi
+
+ # Add in members from convenience archives.
+ for xlib in $addlibs; do
+ # Extract the objects.
+ xdir="$xlib"x
+ generated="$generated $xdir"
+ xlib=`echo "$xlib" | $Xsed -e 's%^.*/%%'`
+
+ $show "${rm}r $xdir"
+ $run ${rm}r "$xdir"
+ $show "mkdir $xdir"
+ $run mkdir "$xdir"
+ status=$?
+ if test $status -ne 0 && test ! -d "$xdir"; then
+ exit $status
+ fi
+ $show "(cd $xdir && $AR x ../$xlib)"
+ $run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $?
+
+ oldobjs="$oldobjs `echo $xdir/*`"
+ done
# Do each command in the archive commands.
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- cmds=`eval \\$echo \"$old_archive_from_new_cmds\"`
+ eval cmds=\"$old_archive_from_new_cmds\"
else
- cmds=`eval \\$echo \"$old_archive_cmds\"`
+ eval cmds=\"$old_archive_cmds\"
fi
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
$run eval "$cmd" || exit $?
done
IFS="$save_ifs"
+ done
+
+ if test -n "$generated"; then
+ $show "${rm}r$generated"
+ $run ${rm}r$generated
fi
# Now create the libtool archive.
case "$output" in
*.la)
old_library=
- test "$build_old_libs" = yes && old_library="$libname.a"
-
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
$show "creating $output"
# Only create the output if not a dry run.
if test -z "$run"; then
- echo > $output \
-"# $output - a libtool library file
-# Generated by ltmain.sh - GNU $PACKAGE $VERSION
+ $echo > $output "\
+# $output - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION
# The name that we can dlopen(3).
dlname='$dlname'
age=$age
revision=$revision
+# Is this an already installed library?
+installed=no
+
# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
+libdir='$install_libdir'\
+"
fi
# Do a symbolic link so that the libtool archive can be found in
# LD_LIBRARY_PATH before the program is installed.
- $show "(cd $objdir && $LN_S ../$output $output)"
- $run eval "(cd $objdir && $LN_S ../$output $output)" || exit 1
+ $show "(cd $output_objdir && $LN_S ../$outputname $outputname)"
+ $run eval "(cd $output_objdir && $LN_S ../$outputname $outputname)" || exit $?
;;
esac
exit 0
install)
modename="$modename: install"
- # There may be an optional /bin/sh argument at the beginning of
+ # There may be an optional sh(1) argument at the beginning of
# install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL"; then
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then
# Aesthetically quote it.
arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
case "$arg" in
opts=
prev=
install_type=
- isdir=
+ isdir=no
stripme=
for arg
do
# Check to see that the destination is a directory.
test -d "$dest" && isdir=yes
- if test -n "$isdir"; then
+ if test "$isdir" = yes; then
destdir="$dest"
destname=
else
fi
fi
case "$destdir" in
- /* | [A-Za-z]:\\*) ;;
+ /* | [A-Za-z]:[/\\]*) ;;
*)
for file in $files; do
case "$file" in
# Do each installation.
case "$file" in
- *.a)
+ *.a | *.lib)
# Do the static libraries later.
staticlibs="$staticlibs $file"
;;
*.la)
# Check to see that this really is a libtool archive.
- if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$file' is not a valid libtool archive" 1>&2
$echo "$help" 1>&2
test "X$dlname" = "X$realname" && dlname=
if test $# -gt 0; then
- # Delete the old symlinks.
- rmcmd="$rm"
- for linkname
- do
- rmcmd="$rmcmd $destdir/$linkname"
- done
- $show "$rmcmd"
- $run $rmcmd
-
- # ... and create new ones.
+ # Delete the old symlinks, and create new ones.
for linkname
do
test "X$dlname" = "X$linkname" && dlname=
- $show "(cd $destdir && $LN_S $realname $linkname)"
- $run eval "(cd $destdir && $LN_S $realname $linkname)"
+ if test "$linkname" != "$realname"; then
+ $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+ $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+ fi
done
fi
# Do each command in the postinstall commands.
lib="$destdir/$realname"
- cmds=`eval \\$echo \"$postinstall_cmds\"`
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ eval cmds=\"$postinstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
# Install the pseudo-library for information purposes.
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- $show "$install_prog $file $destdir/$name"
- $run eval "$install_prog $file $destdir/$name" || exit $?
+ instname="$dir/$name"i
+ $show "Creating $instname"
+ $rm "$instname"
+ sed 's/^installed=no$/installed=yes/' "$file" > "$instname"
+ $show "$install_prog $instname $destdir/$name"
+ $run eval "$install_prog $instname $destdir/$name" || exit $?
+ $show "$rm $instname"
+ $rm "$instname"
# Maybe install the static library, too.
test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
# Deduce the name of the destination old-style object file.
case "$destfile" in
*.lo)
- staticdest=`$echo "X$destfile" | $Xsed -e 's/\.lo$/\.o/'`
+ staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
;;
- *.o)
+ *.o | *.obj)
staticdest="$destfile"
destfile=
;;
# Install the old object if enabled.
if test "$build_old_libs" = yes; then
# Deduce the name of the old-style object file.
- staticobj=`$echo "X$file" | $Xsed -e 's/\.lo$/\.o/'`
+ staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
$show "$install_prog $staticobj $staticdest"
$run eval "$install_prog \$staticobj \$staticdest" || exit $?
;;
*)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ destfile="$destdir/$destfile"
+ fi
+
# Do a test to see if this is really a libtool program.
- if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
+ if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
link_against_libtool_libs=
finalize_command=
esac
fi
libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
- if test -z "$libdir"; then
- $echo "$modename: warning: \`$lib' contains no -rpath information" 1>&2
- elif test -f "$libfile"; then :
- else
+ if test -n "$libdir" && test ! -f "$libfile"; then
$echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
finalize=no
fi
fi
fi
- $show "$install_prog$stripme $file $dest"
- $run eval "$install_prog\$stripme \$file \$dest" || exit $?
+ $show "$install_prog$stripme $file $destfile"
+ $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
;;
esac
done
$run eval "$install_prog \$file \$oldlib" || exit $?
# Do each command in the postinstall commands.
- cmds=`eval \\$echo \"$old_postinstall_cmds\"`
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ eval cmds=\"$old_postinstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
finish)
modename="$modename: finish"
libdirs="$nonopt"
+ admincmds=
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
for dir
for libdir in $libdirs; do
if test -n "$finish_cmds"; then
# Do each command in the finish commands.
- cmds=`eval \\$echo \"$finish_cmds\"`
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ eval cmds=\"$finish_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
- $run eval "$cmd"
+ $run eval "$cmd" || admincmds="$admincmds
+ $cmd"
done
IFS="$save_ifs"
fi
if test -n "$finish_eval"; then
# Do the single finish_eval.
- cmds=`eval \\$echo \"$finish_eval\"`
- $run eval "$cmds"
+ eval cmds=\"$finish_eval\"
+ $run eval "$cmds" || admincmds="$admincmds
+ $cmds"
fi
done
fi
- echo "------------------------------------------------------------------------------"
+ # Exit here if they wanted silent mode.
+ test "$show" = : && exit 0
+
+ echo "----------------------------------------------------------------------"
echo "Libraries have been installed in:"
for libdir in $libdirs; do
echo " $libdir"
echo "To link against installed libraries in a given directory, LIBDIR,"
echo "you must use the \`-LLIBDIR' flag during linking."
echo
- echo " You will also need to do one of the following:"
+ echo " You will also need to do at least one of the following:"
if test -n "$shlibpath_var"; then
echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
echo " during execution"
fi
if test -n "$hardcode_libdir_flag_spec"; then
libdir=LIBDIR
- flag=`eval \\$echo \"$hardcode_libdir_flag_spec\"`
+ eval flag=\"$hardcode_libdir_flag_spec\"
echo " - use the \`$flag' linker flag"
fi
+ if test -n "$admincmds"; then
+ echo " - have your system administrator run these commands:$admincmds"
+ fi
if test -f /etc/ld.so.conf; then
echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
fi
echo
echo "See any operating system documentation about shared libraries for"
echo "more information, such as the ld(1) and ld.so(8) manual pages."
- echo "------------------------------------------------------------------------------"
+ echo "----------------------------------------------------------------------"
exit 0
;;
# Handle -dlopen flags immediately.
for file in $execute_dlfiles; do
- if test -f "$file"; then :
- else
+ if test ! -f "$file"; then
$echo "$modename: \`$file' is not a file" 1>&2
$echo "$help" 1>&2
exit 1
case "$file" in
*.la)
# Check to see that this really is a libtool archive.
- if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
$echo "$help" 1>&2
-*) ;;
*)
# Do a test to see if this is really a libtool program.
- if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
+ if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
# If there is no directory component, then add one.
case "$file" in
*/* | *\\*) . $file ;;
# Export the shlibpath_var.
eval "export $shlibpath_var"
+ # Restore saved enviroment variables
+ if test "${save_LC_ALL+set}" = set; then
+ LC_ALL="$save_LC_ALL"; export LC_ALL
+ fi
+ if test "${save_LANG+set}" = set; then
+ LANG="$save_LANG"; export LANG
+ fi
+
# Now actually exec the command.
eval "exec \$cmd$args"
case "$name" in
*.la)
# Possibly a libtool archive, so verify it.
- if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
+ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
. $dir/$name
# Delete the libtool libraries and symlinks.
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
- cmds=`eval \\$echo \"$postuninstall_cmds\"`
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ eval cmds=\"$postuninstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
- cmds=`eval \\$echo \"$old_postuninstall_cmds\"`
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
+ eval cmds=\"$old_postuninstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
*.lo)
if test "$build_old_libs" = yes; then
- oldobj=`$echo "X$name" | $Xsed -e 's/\.lo$/\.o/'`
+ oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
rmfiles="$rmfiles $dir/$oldobj"
fi
$show "$rm $rmfiles"
Provide generalized library-building support services.
+ --config show all configuration variables
+ --debug enable verbose shell tracing
-n, --dry-run display commands without modifying any files
- --features display configuration information and exit
+ --features display basic configuration information and exit
--finish same as \`--mode=finish'
--help display this help message and exit
--mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
Compile a source file into a libtool library object.
+This mode accepts the following additional options:
+
+ -static always build a \`.o' file suitable for static linking
+
COMPILE-COMMAND is a command to be used in creating a \`standard' object file
from the given SOURCEFILE.
If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only
library objects (\`.lo' files) may be specified, and \`-rpath' is required.
-If OUTPUT-FILE ends in \`.a', then a standard library is created using \`ar'
-and \`ranlib'.
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
-If OUTPUT-FILE ends in \`.lo' or \`.o', then a reloadable object file is
-created, otherwise an executable program is created."
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
;;
uninstall)