Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze

[~andy/linux] / include / linux / usb / ch9.h

diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index af21f311591943338672a13e538fb5dbf522cef7..d1d732c2838d3a48788c16fe87bd9552a8558ab8 100644 (file)
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -88,6 +88,8 @@
 #define USB_REQ_GET_INTERFACE          0x0A
 #define USB_REQ_SET_INTERFACE          0x0B
 #define USB_REQ_SYNCH_FRAME            0x0C
+#define USB_REQ_SET_SEL                        0x30
+#define USB_REQ_SET_ISOCH_DELAY                0x31
 
 #define USB_REQ_SET_ENCRYPTION         0x0D    /* Wireless USB */
 #define USB_REQ_GET_ENCRYPTION         0x0E
@@ -390,6 +392,11 @@ struct usb_endpoint_descriptor {
 #define USB_ENDPOINT_XFER_INT          3
 #define USB_ENDPOINT_MAX_ADJUSTABLE    0x80
 
+/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
+#define USB_ENDPOINT_INTRTYPE          0x30
+#define USB_ENDPOINT_INTR_PERIODIC     (0 << 4)
+#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4)
+
 #define USB_ENDPOINT_SYNCTYPE          0x0c
 #define USB_ENDPOINT_SYNC_NONE         (0 << 2)
 #define USB_ENDPOINT_SYNC_ASYNC                (1 << 2)
@@ -592,6 +599,12 @@ static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
        return __le16_to_cpu(epd->wMaxPacketSize);
 }
 
+static inline int usb_endpoint_interrupt_type(
+               const struct usb_endpoint_descriptor *epd)
+{
+       return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
@@ -933,6 +946,51 @@ enum usb_device_state {
         */
 };
 
+enum usb3_link_state {
+       USB3_LPM_U0 = 0,
+       USB3_LPM_U1,
+       USB3_LPM_U2,
+       USB3_LPM_U3
+};
+
+/*
+ * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
+ * 0xff means the parent hub will accept transitions to U1, but will not
+ * initiate a transition.
+ *
+ * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
+ * U1 after that many microseconds.  Timeouts of 0x80 to 0xFE are reserved
+ * values.
+ *
+ * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
+ * 0xff means the parent hub will accept transitions to U2, but will not
+ * initiate a transition.
+ *
+ * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
+ * U2 after N*256 microseconds.  Therefore a U2 timeout value of 0x1 means a U2
+ * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
+ * 65.024ms.
+ */
+#define USB3_LPM_DISABLED              0x0
+#define USB3_LPM_U1_MAX_TIMEOUT                0x7F
+#define USB3_LPM_U2_MAX_TIMEOUT                0xFE
+#define USB3_LPM_DEVICE_INITIATED      0xFF
+
+struct usb_set_sel_req {
+       __u8    u1_sel;
+       __u8    u1_pel;
+       __le16  u2_sel;
+       __le16  u2_pel;
+} __attribute__ ((packed));
+
+/*
+ * The Set System Exit Latency control transfer provides one byte each for
+ * U1 SEL and U1 PEL, so the max exit latency is 0xFF.  U2 SEL and U2 PEL each
+ * are two bytes long.
+ */
+#define USB3_LPM_MAX_U1_SEL_PEL                0xFF
+#define USB3_LPM_MAX_U2_SEL_PEL                0xFFFF
+
 /*-------------------------------------------------------------------------*/
 
 /*