'\" t
.\" ** The above line should force tbl to be used as a preprocessor **
.\"
-.\" Man page for fetchmail
+.\" Manual page in man(7) format with tbl(1) macros for fetchmail
.\"
.\" For license terms, see the file COPYING in this directory.
+.\"
.TH fetchmail 1
.SH NAME
fetchmail \- fetch mail from a POP, IMAP, ETRN, or ODMR-capable server
.PP
If
.I fetchmail
-is used with a POP or an IMAP server, it has two fundamental modes of
+is used with a POP or an IMAP server, it has two fundamental modes of
operation for each user account from which it retrieves mail:
\fIsingledrop\fR- and \fImultidrop\fR-mode. In singledrop-mode,
.I fetchmail
must attempt to deduce the proper "envelope recipient" from the mail
headers of each message. In this mode of operation
.I fetchmail
-almost resembles an MTA, however it is important to note that neither
+almost resembles an MTA, however it is important to note that neither
the POP nor IMAP protocols were intended for use in this fashion, and
hence envelope information is not directly available. Instead,
.I fetchmail
.PP
If no port 25 listener is available, but your fetchmail configuration
was told about a reliable local MDA, it will use that MDA for local
-delivery instead. At build time, fetchmail normally looks for
-executable
-.IR procmail (1)
-and
-.IR sendmail (1)
-binaries.
+delivery instead.
.PP
If the program
.I fetchmailconf
is available, it will assist you in setting up and editing a
-fetchmailrc configuration. It runs under X and requires that the
-language Python and the Tk toolkit be present on your system. If
-you are first setting up fetchmail for single-user mode, it is
-recommended that you use Novice mode. Expert mode provides
-complete control of fetchmail configuration, including the
-multidrop features. In either case, the `Autoprobe' button
-will tell you the most capable protocol a given mailserver
-supports, and warn you of potential problems with that server.
+fetchmailrc configuration. It runs under the X window system and
+requires that the language Python and the Tk toolkit be present on your
+system. If you are first setting up fetchmail for single-user mode, it
+is recommended that you use Novice mode. Expert mode provides complete
+control of fetchmail configuration, including the multidrop features.
+In either case, the 'Autoprobe' button will tell you the most capable
+protocol a given mailserver supports, and warn you of potential problems
+with that server.
.SH GENERAL OPERATION
The behavior of
.PP
Each server name that you specify following the options on the
command line will be queried. If you don't specify any servers
-on the command line, each `poll' entry in your
+on the command line, each 'poll' entry in your
.I ~/.fetchmailrc
file will be queried.
.PP
To facilitate the use of
.I fetchmail
-in scripts and pipelines, it returns an appropriate exit code upon
+in scripts and pipelines, it returns an appropriate exit code upon
termination -- see EXIT CODES below.
.PP
The following options modify the behavior of \fIfetchmail\fR. It is
working \fI.fetchmailrc\fR file set up.
.PP
Almost all options have a corresponding keyword which can be used to
-declare them in a
+declare them in a
.I .fetchmailrc
file.
.PP
.SS General Options
.TP
.B \-V | \-\-version
-Displays the version information for your copy of
+Displays the version information for your copy of
.IR fetchmail .
No mail fetch is performed.
Instead, for each server specified, all the option information
suppress actual error messages). The --verbose option overrides this.
.TP
.B \-v | \-\-verbose
-Verbose mode. All control messages passed between
+Verbose mode. All control messages passed between
.I fetchmail
and the mailserver are echoed to stdout. Overrides --silent.
Doubling this option (-v -v) causes extra diagnostic information
-to be printed.
+to be printed.
.SS Disposal Options
.TP
.B \-a | \-\-all
.TP
.B \-k | \-\-keep
(Keyword: keep)
-Keep retrieved messages on the remote mailserver. Normally, messages
+Keep retrieved messages on the remote mailserver. Normally, messages
are deleted from the folder on the mailserver after they have been retrieved.
-Specifying the
-.B keep
+Specifying the
+.B keep
option causes retrieved messages to remain in your folder on the
mailserver. This option does not work with ETRN or ODMR.
.TP
\&\fI.fetchmailrc\fR. This option is forced on with ETRN and ODMR.
.TP
.B \-F | \-\-flush
-POP3/IMAP only. Delete old (previously retrieved) messages from the
-mailserver before retrieving new messages. This option does not work
-with ETRN or ODMR. Warning: if your local MTA hangs and fetchmail is
-aborted, the next time you run fetchmail, it will delete mail that was
-never delivered to you. What you probably want is the default
-setting: if you don't specify `-k', then fetchmail will automatically
-delete messages after successful delivery.
+POP3/IMAP only. This is a dangerous option and can cause mail loss when
+used improperly. It deletes old (seen) messages from the mailserver
+before retrieving new messages. Warning: This can cause mail loss if
+you check your mail with other clients than fetchmail, and cause
+fetchmail to delete a message it had never fetched before. Similarly, if
+your local MTA hangs and fetchmail is aborted, the next time you run
+fetchmail, it will delete mail that was never delivered to you. You
+should probably not use this option in your configuration file. What you
+probably want is the default setting: if you don't specify '-k', then
+fetchmail will automatically delete messages after successful
+delivery. This option does not work with ETRN and ODMR.
+.TP
+.B \-\-limitflush
+POP3/IMAP only, since version 6.3.0. Delete oversized messages from the
+mailserver before retrieving new messages. The size limit should be
+separately sepecified with the --limit option. This option does not
+work with ETRN or ODMR.
.SS Protocol and Query Options
.TP
-.B \-p <proto> | \-\-protocol <proto>
+.B \-p <proto> | \-\-proto <proto> | \-\-protocol <proto>
(Keyword: proto[col])
-Specify the protocol to use when communicating with the remote
+Specify the protocol to use when communicating with the remote
mailserver. If no protocol is specified, the default is AUTO.
-.I proto
+.I proto
may be one of the following:
.RS
.IP AUTO
.B \-U | \-\-uidl
(Keyword: uidl)
Force UIDL use (effective only with POP3). Force client-side tracking
-of `newness' of messages (UIDL stands for ``unique ID listing'' and is
-described in RFC1725). Use with `keep' to use a mailbox as a baby
+of 'newness' of messages (UIDL stands for "unique ID listing" and is
+described in RFC1939). Use with 'keep' to use a mailbox as a baby
news drop for a group of users. The fact that seen messages are skipped
is logged, unless error logging is done through syslog while running in
-daemon mode.
+daemon mode. Note that fetchmail may automatically enable this option
+depending on upstream server capabilities. Note also that this option
+may be removed and forced enabled in a future fetchmail version.
+.TP
+.B \-\-service <servicename>
+(Keyword: service) Since version 6.3.0.
+The service option permits you to specify a service name to connect to.
+You can specify a decimal port number here, if your services database
+lacks the required service-port assignments. See the FAQ item R12 and
+the \-\-ssl documentation for details. This replaces the older \-\-port
+option.
.TP
.B \-P <portnumber> | \-\-port <portnumber>
(Keyword: port)
-The port option permits you to specify a TCP/IP port to connect on.
-This option will seldom be necessary as all the supported protocols have
-well-established default port numbers.
+Obsolete version of \-\-service that does not take service names.
+.B Note:
+this option may be removed from a future version.
.TP
.B \-\-principal <principal>
(Keyword: principal)
The principal option permits you to specify a service principal for
mutual authentication. This is applicable to POP3 or IMAP with Kerberos
authentication.
-.TP
-.B \-t <seconds> | -\-timeout <seconds>
+.TP
+.B \-t <seconds> | \-\-timeout <seconds>
(Keyword: timeout)
The timeout option allows you to set a server-nonresponse
timeout in seconds. If a mailserver does not send a greeting message
\fIfetchmail\fR will hang up on it. Without such a timeout
\fIfetchmail\fR might hang up indefinitely trying to fetch mail from a
down host. This would be particularly annoying for a \fIfetchmail\fR
-running in background. There is a default timeout which fetchmail -V
-will report. If a given connection receives too many timeouts in
+running in background. There is a default timeout which fetchmail\~-V
+will report. If a given connection receives too many timeouts in
succession, fetchmail will consider it wedged and stop retrying,
the calling user will be notified by email if this happens.
.TP
.TP
.B \-\-tracepolls
(Keyword: tracepolls)
-Tell fetchmail to poll trace information in the form `polling %s
+Tell fetchmail to poll trace information in the form 'polling %s
account %s' to the Received line it generates, where the %s parts are
replaced by the user's remote name and the poll label (the Received
header also normally includes the server's true name). This can be
(Keyword: ssl)
Causes the connection to the mail server to be encrypted via SSL. Connect
to the server using the specified base protocol over a connection secured
-by SSL. SSL support must be present at the server. If no port is
-specified, the connection is attempted to the well known port of the SSL
-version of the base protocol. This is generally a different port than the
-port used by the base protocol. For IMAP, this is port 143 for the clear
-protocol and port 993 for the SSL secured protocol.
+by SSL. SSL support must be present at the server.
+.sp
+If no port is specified, the connection is attempted to the well known
+port of the SSL version of the base protocol. This is generally a
+different port than the port used by the base protocol. For IMAP, this
+is port 143 for the clear protocol and port 993 for the SSL secured
+protocol, for POP3, it is port 110 for the cleartext and port 995 for
+the encrypted variant.
+.sp
+If your system lacks the corresponding entries from /etc/services, see
+the \-\-service option and specify the numeric port number as given in
+the previous paragraph (unless your ISP had directed you to different
+ports, which is uncommon however).
.TP
.B \-\-sslcert <name>
(Keyword: sslcert)
.TP
.B \-\-sslproto <name>
(Keyword: sslproto)
-Forces an SSL protocol. Possible values are \&`\fBssl2\fR', `\fBssl3\fR' and
-`\fBtls1\fR'. Try this if the default handshake does not work for your server.
+Forces an SSL protocol. Possible values are '\fBssl2\fR',
+\&'\fBssl3\fR', '\fBssl23\fR', and '\fBtls1\fR'. Try this if the default
+handshake does not work for your server. To defeat automatic TLSv1
+negotiation when the server advertises STARTTLS or STLS, use \fB''\fR or
+\&'\fBssl23\fR'. The default is to try appropriate protocols depending
+on context.
.TP
.B \-\-sslcertck
(Keyword: sslcertck)
Specify a hunt list of hosts to forward mail to (one or more
hostnames, comma-separated). Hosts are tried in list order; the first
one that is up becomes the forwarding target for the current run.
-Normally, `localhost' is added to the end of the list as an invisible
+Normally, 'localhost' is added to the end of the list as an invisible
default. However, when using Kerberos authentication, the FQDN of the
machine running fetchmail is added to the end of the list as an
invisible default. Each hostname may have a port number following the
host name. The port number is separated from the host name by a
-slash; the default port is 25 (or ``smtp'' under IPv6). If you
+slash; the default port is 25 (or "smtp" under IPv6). If you
specify an absolute path name (beginning with a /), it will be
interpreted as the name of a UNIX socket accepting LMTP connections
(such as is supported by the Cyrus IMAP daemon) Example:
.sp
This option can be used with ODMR, and will make fetchmail a relay
between the ODMR server and SMTP or LMTP receiver.
-.TP
+.TP
.B \-\-fetchdomains <hosts>
(Keyword: fetchdomains)
In ETRN or ODMR mode, this option specifies the list of domains the
server should ship mail for once the connection is turned around. The
-default is the FQDN of the machine running
+default is the FQDN of the machine running
.IR fetchmail .
.TP
.B \-D <domain> | \-\-smtpaddress <domain>
this is not specified.
.TP
.B \-\-smtpname <user@domain>
-(Keyword: smtpname)
+(Keyword: smtpname)
Specify the domain and user to be put in RCPT TO lines shipped to SMTP.
The default user is the current local user.
.TP
.B \-Z <nnn> | \-\-antispam <nnn[, nnn]...>
-(Keyword: antispam)
+(Keyword: antispam)
Specifies the list of numeric SMTP errors that are to be interpreted
as a spam-block response from the listener. A value of -1 disables
this option. For the command-line option, the list values should
.B \-m <command> | \-\-mda <command>
(Keyword: mda) You can force mail to be passed to an MDA directly
(rather than forwarded to port 25) with the --mda or -m option. To
-avoid losing mail, use this option only with MDAs like procmail or
+avoid losing mail, use this option only with MDAs like maildrop, procmail or
sendmail that return a nonzero status on disk-full and other
resource-exhaustion errors; the nonzero status tells fetchmail that
delivery failed and prevents the message from being deleted off the
it's what SMTP listeners normally forward to). Local delivery
addresses will be inserted into the MDA command wherever you place a
%T; the mail message's From address will be inserted where you place
-an %F. In both cases the addresses are enclosed in single quotes ('),
+an %F. \fBDO NOT ENCLOSE THE %F OR %T STRING IN SINGLE QUOTES!\fR For
+both %T and %F, fetchmail encloses the addresses in single quotes ('),
after removing any single quotes they may contain, before the MDA
-command is passed to the shell. Do \fInot\fR use an MDA invocation
+command is passed to the shell. Do \fINOT\fR use an MDA invocation
like "sendmail -i -t" that dispatches on the contents of To/Cc/Bcc, it
will create mail loops and bring the just wrath of many postmasters
down upon your head. Also, do \fInot\fR try to combine multidrop
-mode with an MDA such as procmail that can only accept one addressee;
-you will lose.
-.TP
+mode with an MDA such as procmail that can only accept one address;
+you will lose mail.
+.TP
.B \-\-lmtp
(Keyword: lmtp)
Cause delivery via LMTP (Local Mail Transfer Protocol). A service
(keyword: bsmtp)
Append fetched mail to a BSMTP file. This simply contains the SMTP
commands that would normally be generated by fetchmail when passing
-mail to an SMTP listener daemon. An argument of `-' causes the mail
+mail to an SMTP listener daemon. An argument of '-' causes the mail
to be written to standard output. Note that fetchmail's
reconstruction of MAIL FROM and RCPT TO lines is not guaranteed
correct; the caveats discussed under THE USE AND ABUSE OF MULTIDROP
foreground sessions, the progress messages will note that they are
"oversized"). If the fetch protocol permits (in particular, under
IMAP or POP3 without the fetchall option) the message will not be
-marked seen. An explicit --limit of 0 overrides any limits set in your
+marked seen.
+.sp
+An explicit --limit of 0 overrides any limits set in your
run control file. This option is intended for those needing to
strictly control fetch time due to expensive and variable phone rates.
-Combined with --flush, it can be used to delete oversized messages
-waiting on a server. In daemon mode, oversize notifications are
-mailed to the calling user (see the --warnings option). This option
-does not work with ETRN or ODMR.
+.sp
+Combined with --limitflush, it can be used to delete oversized
+messages waiting on a server. In daemon mode, oversize notifications
+are mailed to the calling user (see the --warnings option). This
+option does not work with ETRN or ODMR.
.TP
.B \-w <interval> | \-\-warnings <interval>
(Keyword: warnings)
Takes an interval in seconds. When you call
.I fetchmail
-with a `limit' option in daemon mode, this controls the interval at
+with a 'limit' option in daemon mode, this controls the interval at
which warnings about oversized messages are mailed to the calling user
-(or the user specified by the `postmaster' option). One such
+(or the user specified by the 'postmaster' option). One such
notification is always mailed at the end of the the first poll that
the oversized message is detected. Thereafter, renotification is
suppressed until after the warning interval elapses (it will take
Do a binary instead of linear search for the first unseen UID. Binary
search avoids downloading the UIDs of all mails. This saves time
(especially in daemon mode) where downloading the same set of UIDs in
-each poll is a waste of bandwidth. The number `n' indicates how rarely
+each poll is a waste of bandwidth. The number 'n' indicates how rarely
a linear search should be done. In daemon mode, linear search is used
-once followed by binary searches in `n-1' polls if `n' is greater than
-1; binary search is always used if `n' is 1; linear search is always
-used if `n' is 0. In non-daemon mode, binary search is used if `n' is
+once followed by binary searches in 'n-1' polls if 'n' is greater than
+1; binary search is always used if 'n' is 1; linear search is always
+used if 'n' is 0. In non-daemon mode, binary search is used if 'n' is
1; otherwise linear search is used.
This option works with POP3 only.
.TP
.B \-e <count> | \-\-expunge <count>
-(keyword: expunge)
+(keyword: expunge)
Arrange for deletions to be made final after a given number of
messages. Under POP2 or POP3, fetchmail cannot make deletions final
without sending QUIT and ending the session -- with this option on,
the end of run). This option does not work with ETRN or ODMR.
.SS Authentication Options
.TP
-.B \-u <name> | \-\-username <name>
+.B \-u <name> | \-\-user <name> | \-\-username <name>
(Keyword: user[name])
Specifies the user identification to be used when logging in to the mailserver.
-The appropriate user identification is both server and user-dependent.
-The default is your login name on the client machine that is running
+The appropriate user identification is both server and user-dependent.
+The default is your login name on the client machine that is running
.IR fetchmail .
See USER AUTHENTICATION below for a complete description.
.TP
.B \-I <specification> | \-\-interface <specification>
(Keyword: interface)
Require that a specific interface device be up and have a specific local
-or remote IP address (or range) before polling. Frequently
-.I fetchmail
+or remote IPv4 (IPv6 is not supported by this option yet) address (or
+range) before polling. Frequently \fIfetchmail\fP
is used over a transient point-to-point TCP/IP link established directly
to a mailserver via SLIP or PPP. That is a relatively secure channel.
But when other TCP/IP routes to the mailserver exist (e.g. when the link
address, polling will be skipped. The format is:
.sp
.nf
- interface/iii.iii.iii.iii/mmm.mmm.mmm.mmm
+ interface/iii.iii.iii.iii[/mmm.mmm.mmm.mmm]
.fi
.sp
The field before the first slash is the interface name (i.e. sl0, ppp0
The field after the second slash is a mask which specifies a range of
IP addresses to accept. If no mask is present 255.255.255.255 is
assumed (i.e. an exact match). This option is currently only supported
-under Linux and FreeBSD. Please see the
-.B monitor
+under Linux and FreeBSD. Please see the
+.B monitor
section for below for FreeBSD specific information.
+.sp
+Note that this option may be removed from a future fetchmail version.
.TP
-.B \-M <interface> | --monitor <interface>
+.B \-M <interface> | \-\-monitor <interface>
(Keyword: monitor)
Daemon mode can cause transient links which are automatically taken down
after a period of inactivity (e.g. PPP links) to remain up
skipped. However, when fetchmail is woken up by a signal, the
monitor check is skipped and the poll goes through unconditionally.
This option is currently only supported under Linux and FreeBSD.
-For the
-.B monitor
-and
+For the
+.B monitor
+and
.B interface
options to work for non root users under FreeBSD, the fetchmail binary
must be installed SGID kmem. This would be a security hole, but
fetchmail runs with the effective GID set to that of the kmem group
.I only
when interface data is being collected.
+.sp
+Note that this option may be removed from a future fetchmail version.
.TP
.B \-\-auth <type>
(Keyword: auth[enticate])
This option permits you to specify an authentication type (see USER
AUTHENTICATION below for details). The possible values are \fBany\fR,
-\&`\fBpassword\fR', `\fBkerberos_v5\fR' and `\fBkerberos\fR' (or, for
-excruciating exactness, `\fBkerberos_v4\fR'), \fRgssapi\fR,
-\fIcram-md5\fR, \fIotp\fR, \fIntlm\fR, and \fBssh\fR. When \fBany\fR (the
-default) is specified, fetchmail tries first methods that don't
-require a password (GSSAPI, KERBEROS_IV); then it looks for methods
-that mask your password (CRAM-MD5, X-OTP, NTLM); and only if the server
-doesn't support any of those will it ship your password en clair.
-Other values may be used to force various authentication methods
+\&\fBpassword\fR, \fBkerberos_v5\fR, \fBkerberos\fR (or, for
+excruciating exactness, \fBkerberos_v4\fR), \fBgssapi\fR,
+\fBcram-md5\fR, \fBotp\fR, \fBntlm\fR, \fBmsn\fR (only for POP3) and
+\fBssh\fR. When \fBany\fR (the default) is specified, fetchmail tries
+first methods that don't require a password (GSSAPI, KERBEROS\ IV,
+KERBEROS\ 5); then it looks for methods that mask your password
+(CRAM-MD5, X-OTP - note that NTLM and MSN are not autoprobed for POP3
+and MSN is only supported for POP3); and only if the server doesn't
+support any of those will it ship your password en clair. Other values
+may be used to force various authentication methods
(\fBssh\fR suppresses authentication). Any value other than
-\fIpassword\fR, \fIcram-md5\fR, \fIntlm\fR or \fIotp\fR suppresses fetchmail's
-normal inquiry for a password. Specify \fIssh\fR when you are using
-an end-to-end secure connection such as an ssh tunnel; specify
-\fRgssapi\fR or \fBkerberos_v4\fR if you are using a protocol variant
-that employs GSSAPI or K4. Choosing KPOP protocol automatically
-selects Kerberos authentication. This option does not work with ETRN.
+\&\fBpassword\fR, \fBcram-md5\fR, \fBntlm\fR, \fBmsn\fR or \fBotp\fR
+suppresses fetchmail's normal inquiry for a password. Specify \fBssh\fR
+when you are using an end-to-end secure connection such as an ssh
+tunnel; specify \fBgssapi\fR or \fBkerberos_v4\fR if you are using a
+protocol variant that employs GSSAPI or K4. Choosing KPOP protocol
+automatically selects Kerberos authentication. This option does not
+work with ETRN.
.SS Miscellaneous Options
.TP
.B \-f <pathname> | \-\-fetchmailrc <pathname>
-Specify a non-default name for the
+Specify a non-default name for the
.I ~/.fetchmailrc
run control file. The pathname argument must be either "-" (a single
dash, meaning to read the configuration from standard input) or a
.B \-i <pathname> | \-\-idfile <pathname>
(Keyword: idfile)
Specify an alternate name for the .fetchids file used to save POP3
-UIDs.
+UIDs.
.TP
.B \-n | \-\-norewrite
(Keyword: no rewrite)
.I fetchmail
edits RFC-822 address headers (To, From, Cc, Bcc, and Reply-To) in
fetched mail so that any mail IDs local to the server are expanded to
-full addresses (@ and the mailserver hostname are appended). This enables
+full addresses (@ and the mailserver hostname are appended). This enables
replies on the client to get addressed correctly (otherwise your
mailer might think they should be addressed to local users on the
client machine!). This option disables the rewrite. (This option is
.TP
.B \-E <line> | \-\-envelope <line>
(Keyword: envelope; Multidrop only)
-This option changes the header
+.br
+In the configuration file, an enhanced syntax is used:
+.br
+.B envelope [<count>] <line>
+.sp
+This option changes the header
.I fetchmail
assumes will carry a copy of the mail's envelope address. Normally
-this is `X-Envelope-To' but as this header is not standard, practice
+this is 'X-Envelope-To' but as this header is not standard, practice
varies. See the discussion of multidrop address handling below. As a
-special case, `envelope "Received"' enables parsing of sendmail-style
+special case, 'envelope "Received"' enables parsing of sendmail-style
Received lines. This is the default, and it should not be necessary
-unless you have globally disabled Received parsing with `no envelope'
+unless you have globally disabled Received parsing with 'no envelope'
in the \fI.fetchmailrc\fR file.
+.sp
+The optional count argument (only available in the configuration file)
+determines how many header lines of this kind are skipped. A count of 1
+means: skip the first, take the second. A count of 2 means: skip the
+first and second, take the third, and so on.
.TP
.B \-Q <prefix> | \-\-qvirtual <prefix>
(Keyword: qvirtual; Multidrop only)
The string prefix assigned to this option will be removed from the user
name found in the header specified with the \fIenvelope\fR option
(\fIbefore\fR doing multidrop name mapping or localdomain checking,
-if either is applicable). This option is useful if you are using
+if either is applicable). This option is useful if you are using
.I fetchmail
to collect the mail for an entire domain and your ISP (or your mail
redirection provider) is using qmail.
One of the basic features of qmail is the
.sp
-\&`Delivered-To:'
+\&'Delivered-To:'
.sp
message header. Whenever qmail delivers a message to a local mailbox
it puts the username and hostname of the envelope recipient on this
line. The major reason for this is to prevent mail loops. To set up
qmail to batch mail for a disconnected site the ISP-mailhost will have
-normally put that site in its `Virtualhosts' control file so it will
+normally put that site in its 'Virtualhosts' control file so it will
add a prefix to all mail addresses for this site. This results in mail
.\" The \&@\& tries to stop HTML converters from making a mailto URL here.
sent to 'username\&@\&userhost.userdom.dom.com' having a
-\&`Delivered-To:' line of the form:
+\&'Delivered-To:' line of the form:
.sp
Delivered-To: mbox-userstr-username\&@\&userhost.userdom.dom.com
.sp
The ISP can make the 'mbox-userstr-' prefix anything they choose
but a string matching the user host name is likely.
-By using the option `envelope Delivered-To:' you can make fetchmail reliably
+By using the option 'envelope Delivered-To:' you can make fetchmail reliably
identify the original envelope recipient, but you have to strip the
-`mbox-userstr-' prefix to deliver to the correct user.
+\&'mbox-userstr-' prefix to deliver to the correct user.
This is what this option is for.
.TP
.B --configdump
-Parse the
+Parse the
.I ~/.fetchmailrc
file, interpret any command-line options specified, and dump a
configuration report to standard output. The configuration report is
a data structure assignment in the language Python. This option
-is meant to be used with an interactive
+is meant to be used with an interactive
.I ~/.fetchmailrc
-editor like
+editor like
.IR fetchmailconf ,
written in Python.
+.SS Removed Options
+.TP
+.B -T | --netsec
+Removed before version 6.3.0, the required underlying inet6_apps library
+had been discontinued and is no longer available.
.SH USER AUTHENTICATION AND ENCRYPTION
All modes except ETRN require authentication of the client to the server.
-Normal user authentication in
+Normal user authentication in
.I fetchmail
-is very much like the authentication mechanism of
+is very much like the authentication mechanism of
.IR ftp (1).
The correct user-id and password depend upon the underlying security
-system at the mailserver.
+system at the mailserver.
.PP
-If the mailserver is a Unix machine on which you have an ordinary user
-account, your regular login name and password are used with
+If the mailserver is a Unix machine on which you have an ordinary user
+account, your regular login name and password are used with
.IR fetchmail .
If you use the same login name on both the server and the client machines,
-you needn't worry about specifying a user-id with the
+you needn't worry about specifying a user-id with the
.B \-u
option \-\- the default behavior is to use your login name on the
client machine as the user-id on the server machine. If you use a
with the
.B \-u
option. e.g. if your login name is 'jsmith' on a machine named 'mailgrunt',
-you would start
-.I fetchmail
+you would start
+.I fetchmail
as follows:
.IP
fetchmail -u jsmith mailgrunt
.PP
-The default behavior of
+The default behavior of
.I fetchmail
is to prompt you for your mailserver password before the connection is
-established. This is the safest way to use
+established. This is the safest way to use
.I fetchmail
and ensures that your password will not be compromised. You may also specify
your password in your
.I ~/.fetchmailrc
-file. This is convenient when using
+file. This is convenient when using
.I fetchmail
in daemon mode or with scripts.
+.SS Using netrc files
.PP
If you do not specify a password, and
.I fetchmail
cannot extract one from your
.I ~/.fetchmailrc
-file, it will look for a
+file, it will look for a
.I ~/.netrc
file in your home directory before requesting one interactively; if an
entry matching the mailserver is found in that file, the password will
.IR ftp (1)
man page for details of the syntax of the
.I ~/.netrc
-file. (This feature may allow you to avoid duplicating password
-information in more than one file.)
+file. To show a practical example, a .netrc might look like
+this:
+.IP
+.nf
+machine hermes.example.org
+login joe
+password topsecret
+.fi
+.PP
+You can repeat this block with different user information if you need to
+provide more than one password.
.PP
-On mailservers that do not provide ordinary user accounts, your user-id and
-password are usually assigned by the server administrator when you apply for
-a mailbox on the server. Contact your server administrator if you don't know
+This feature may allow you to avoid duplicating password
+information in more than one file.
+.PP
+On mailservers that do not provide ordinary user accounts, your user-id and
+password are usually assigned by the server administrator when you apply for
+a mailbox on the server. Contact your server administrator if you don't know
the correct user-id and password for your mailbox account.
+.SS POP3 variants
.PP
Early versions of POP3 (RFC1081, RFC1225) supported a crude form of
independent authentication using the
server that it should do special checking. RPOP is supported
by
.I fetchmail
-(you can specify `protocol RPOP' to have the program send `RPOP'
-rather than `PASS') but its use is strongly discouraged. This
+(you can specify 'protocol RPOP' to have the program send 'RPOP'
+rather than 'PASS') but its use is strongly discouraged. This
facility was vulnerable to spoofing and was withdrawn in RFC1460.
.PP
RFC1460 introduced APOP authentication. In this variant of POP3,
you register an APOP password on your server host (the program
to do this with on the server is probably called \fIpopauth\fR(8)). You
-put the same password in your
+put the same password in your
.I ~/.fetchmailrc
-file. Each time
+file. Each time
.I fetchmail
logs in, it sends a cryptographically secure hash of your password and
the server greeting time to the server, which can verify it by
-checking its authorization database.
+checking its authorization database.
+.SS Alternate authentication forms
.PP
-If your \fIfetchmail\fR was built with Kerberos support and you specify
+If your \fIfetchmail\fR was built with Kerberos support and you specify
Kerberos authentication (either with --auth or the \fI.fetchmailrc\fR
option \fBauthenticate kerberos_v4\fR) it will try to get a Kerberos
ticket from the mailserver at the start of each query. Note: if
-either the pollname or via name is `hesiod', fetchmail will try to use
+either the pollname or via name is 'hesiod', fetchmail will try to use
Hesiod to look up the mailserver.
.PP
If you use POP3 or IMAP with GSSAPI authentication, \fIfetchmail\fR will
using the standard \fB--user\fR command or by the \fI.fetchmailrc\fR
option \fBuser\fR.
.PP
-If your IMAP daemon returns the PREAUTH response in its greeting line,
+If your IMAP daemon returns the PREAUTH response in its greeting line,
fetchmail will notice this and skip the normal authentication step.
This can be useful, e.g. if you start imapd explicitly using ssh.
-In this case you can declare the authentication value `ssh' on that
+In this case you can declare the authentication value 'ssh' on that
site entry to stop \fI.fetchmail\fR from asking you for a password
when it starts up.
.PP
will try to perform an NTLM authentication (instead of sending over the
password en clair) whenever the server returns AUTH=NTLM in its
capability response. Specify a user option value that looks like
-`user@domain': the part to the left of the @ will be passed as the
+\&'user@domain': the part to the left of the @ will be passed as the
username and the part to the right as the NTLM domain.
-.PP
-If you are using IPsec, the -T (--netsec) option can be used to pass
-an IP security request to be used when outgoing IP connections are
-initialized. You can also do this using the `netsec' server option
-in the .fetchmailrc file. In either case, the option value is a
-string in the format accepted by the net_security_strtorequest()
-function of the inet6_apps library.
+.SS Secure Socket Layers (SSL)
.PP
You can access SSL encrypted services by specifying the --ssl option.
You can also do this using the "ssl" server option in the .fetchmailrc
http://www.monkey.org/~dugsong/dsniff/). Use of an ssh tunnel (see
below for some examples) is preferable if you care seriously about the
security of your mailbox.
+.SS SMTP AUTH
.PP
.B fetchmail
also supports authentication to the ESMTP server on the client side
according to RFC 2554. You can specify a name/password pair to be
-used with the keywords `esmtpname' and `esmtppassword'; the former
+used with the keywords 'esmtpname' and 'esmtppassword'; the former
defaults to the username of the calling user.
.SH DAEMON MODE
-The
+The
.B \-\-daemon <interval>
or
.B \-d <interval>
-option runs
+option runs
.I fetchmail
in daemon mode. You must specify a numeric argument which is a
polling interval in seconds.
.PP
-In daemon mode,
+In daemon mode,
.I fetchmail
puts itself in background and runs forever, querying each specified
host and then sleeping for the given polling interval.
.IP
fetchmail -d 900
.PP
-will, therefore, poll all the hosts described in your
+will, therefore, poll all the hosts described in your
.I ~/.fetchmailrc
-file (except those explicitly excluded with the `skip' verb) once
+file (except those explicitly excluded with the 'skip' verb) once
every fifteen minutes.
.PP
-It is possible to set a polling interval
+It is possible to set a polling interval
in your
.I ~/.fetchmailrc
-file by saying `set daemon <interval>', where <interval> is an
+file by saying 'set daemon <interval>', where <interval> is an
integer number of seconds. If you do this, fetchmail will always
start in daemon mode unless you override it with the command-line
option --daemon 0 or -d0.
Normally, calling fetchmail with a daemon in the background sends a
wake-up signal to the daemon, forcing it to poll mailservers
immediately. (The wake-up signal is SIGHUP if fetchmail is running as
-root, SIGUSR1 otherwise.) The wake-up action also clears any `wedged'
-flags indicating that connections have wedged due to failed
+root, SIGUSR1 otherwise.) The wake-up action also clears any 'wedged'
+flags indicating that connections have wedged due to failed
authentication or multiple timeouts.
.PP
The option
-.B --quit
+.B \-\-quit
will kill a running daemon process instead of waking it up (if there
-is no such process,
-.I fetchmail
-notifies you). If the --quit option is the only command-line option,
-that's all there is to it.
-.PP
-The quit option may also be mixed with other command-line options; its
-effect is to kill any running daemon before doing what the other
-options specify in combination with the fetchmailrc file.
+is no such process, \fIfetchmail\fP will notify you.
+If the \-\-quit option appears last on the command line, \fIfetchmail\fP
+will kill the running daemon process and then quit. Otherwise,
+\fIfetchmail\fP will first kill a running daemon process and then
+continue running with the other options.
.PP
The
.B \-L <filename>
file are still written to stderr, or to the specified log file.
The
.B \-\-nosyslog
-option turns off use of
+option turns off use of
.IR syslog (3),
-assuming it's turned on in the
-.I ~/.fetchmailrc
+assuming it's turned on in the
+.I ~/.fetchmailrc
file, or that the
.B \-L
or
.B \-\-logfile <file>
option was used.
.PP
-The
+The
.B \-N
-or --nodetach option suppresses backgrounding and detachment of the
-daemon process from its control terminal. This is primarily useful
-for debugging. Note that this also causes the logfile option to be
+or
+.B --nodetach
+option suppresses backgrounding and detachment of the
+daemon process from its control terminal. This is useful
+for debugging or when fetchmail runs as the child of a supervisor
+process such as
+.IR init (8)
+or Gerrit Pape's
+.I runit.
+Note that this also causes the logfile option to be
ignored (though perhaps it shouldn't).
.PP
Note that while running in daemon mode polling a POP2 or IMAP2bis server,
next poll cycle. (The IMAP logic doesn't delete messages until
they're delivered, so this problem does not arise.)
.PP
-If you touch or change the
-.I ~/.fetchmailrc
-file while fetchmail is running in daemon mode, this will be detected
+If you touch or change the
+.I ~/.fetchmailrc
+file while fetchmail is running in daemon mode, this will be detected
at the beginning of the next poll cycle. When a changed
-.I ~/.fetchmailrc
+.I ~/.fetchmailrc
is detected, fetchmail rereads it and restarts from scratch (using
exec(2); no state information is retained in the new instance). Note also
that if you break the
-.I ~/.fetchmailrc
+.I ~/.fetchmailrc
file's syntax, the new instance will softly and silently vanish away
on startup.
.SH ADMINISTRATIVE OPTIONS
.PP
-The
+The
.B \-\-postmaster <name>
option (keyword: set postmaster) specifies the last-resort username to
which multidrop mail is to be forwarded if no matching local recipient
-can be found. Normally this is just the user who invoked
+can be found. Normally this is just the user who invoked
.IR fetchmail .
If the invoking user is root, then the default of this option is
-the user `postmaster'. Setting postmaster to the empty string causes
+the user 'postmaster'. Setting postmaster to the empty string causes
such mail to be discarded.
.PP
The
.B \-\-nobounce
-option suppresses the normal action of bouncing errors back to the
+option suppresses the normal action of bouncing errors back to the
sender in an RFC1894-conformant error message. If nobounce is on, the
message will go to the postmaster instead.
.PP
-The
+The
.B \-\-invisible
option (keyword: set invisible) tries to make fetchmail invisible.
Normally, fetchmail behaves like any other MTA would -- it generates a
the MTA it forwards to into thinking it came directly from the
mailserver host.
.PP
-The
+The
.B \-\-showdots
option (keyword: set showdots) forces fetchmail to show progress dots
even if the current tty is not stdout (for example logfiles).
-Starting with fetchmail version 5.3.0,
+Starting with fetchmail version 5.3.0,
progress dots are only shown on stdout by default.
.PP
By specifying the
example, occur if you have an account on the same server running a
mailing list, and are subscribed to the list using that account). The
default is not adding any such header. In
-.IR .fetchmailrc ,
-this is called `tracepolls'.
+.IR .fetchmailrc ,
+this is called 'tracepolls'.
.SH RETRIEVAL FAILURE MODES
The protocols \fIfetchmail\fR uses to talk to mailservers are next to
spam block.
.PP
When forwarding to an MDA, however, there is more possibility
-of error. Some MDAs are `safe' and reliably return a nonzero status
+of error. Some MDAs are 'safe' and reliably return a nonzero status
on any delivery error, even one due to temporary resource limits.
The well-known
.IR procmail (1)
program is like this; so are most programs designed as mail transport
-agents, such as
+agents, such as
.IR sendmail (1),
and
.IR exim (1).
MDAs, though, may return 0 even on delivery failure. If this
happens, you will lose mail.
.PP
-The normal mode of \fIfetchmail\fR is to try to download only `new'
+The normal mode of \fIfetchmail\fR is to try to download only 'new'
messages, leaving untouched (and undeleted) messages you have already
read directly on the server (or fetched with a previous \fIfetchmail
--keep\fR). But you may find that messages you've already read on the
--all. There are several reasons this can happen.
.PP
One could be that you're using POP2. The POP2 protocol includes no
-representation of `new' or `old' state in messages, so \fIfetchmail\fR
+representation of 'new' or 'old' state in messages, so \fIfetchmail\fR
must treat all messages as new all the time. But POP2 is obsolete, so
this is unlikely.
.PP
to the client via SMTP. Therefore it sends only undelivered messages.
.SH SPAM FILTERING
-Many SMTP listeners allow administrators to set up `spam filters' that
+Many SMTP listeners allow administrators to set up 'spam filters' that
block unsolicited email from specified domains. A MAIL FROM or DATA line that
triggers this feature will elicit an SMTP response which
(unfortunately) varies according to the listener.
.PP
-Newer versions of
+Newer versions of
.I sendmail
-return an error code of 571. This return value
-is blessed by RFC1893 as "Delivery not authorized, message refused".
+return an error code of 571.
.PP
According to RFC2821, the correct thing to return in this situation is
550 "Requested action not taken: mailbox unavailable" (the draft adds
.I postfix
MTA runs 554 as an antispam response.
.PP
-.I Zmailer
+.I Zmailer
may reject code with a 500 response (followed by an enhanced status
code that contains more information).
.PP
-Return codes which
+Return codes which
.I fetchmail
treats as antispam responses and discards
-the message can be set with the `antispam' option. This is one of the
+the message can be set with the 'antispam' option. This is one of the
.I only
three circumstance under which fetchmail ever discards mail (the others
are the 552 and 553 errors described below, and the suppression of
.I fetchmail
is fetching from an IMAP server, the antispam response will be detected and
the message rejected immediately after the headers have been fetched,
-without reading the message body. Thus, you won't pay for downloading
+without reading the message body. Thus, you won't pay for downloading
spam message bodies.
.PP
By default, the list of antispam responses is empty.
When there is a conflict between the command-line arguments and the
arguments in this file, the command-line arguments take precedence.
.PP
-To protect the security of your passwords,
+To protect the security of your passwords,
your \fI~/.fetchmailrc\fR may not normally have more than 0600 (u=rw,g=,o=) permissions;
.I fetchmail
will complain and exit otherwise (this check is suppressed when
--version is on).
.PP
-You may read the \fI.fetchmailrc\fR file as a list of commands to
-be executed when
+You may read the \fI.fetchmailrc\fR file as a list of commands to
+be executed when
.I fetchmail
is called with no arguments.
.SS Run Control Syntax
A quoted string is bounded by double quotes and may contain
whitespace (and quoted digits are treated as a string). An unquoted
string is any whitespace-delimited token that is neither numeric, string
-quoted nor contains the special characters `,', `;', `:', or `='.
+quoted nor contains the special characters ',', ';', ':', or '='.
.PP
Any amount of whitespace separates tokens in server entries, but is
otherwise ignored. You may use standard C-style escapes (\en, \et,
\eb, octal, and hex) to embed non-printable characters or string
delimiters in strings.
.PP
-Each server entry consists of one of the keywords `poll' or `skip',
+Each server entry consists of one of the keywords 'poll' or 'skip',
followed by a server name, followed by server options, followed by any
number of user descriptions. Note: the most common cause of syntax
errors is mixing up user and server options.
.PP
-For backward compatibility, the word `server' is a synonym for `poll'.
+For backward compatibility, the word 'server' is a synonym for 'poll'.
.PP
-You can use the noise keywords `and', `with',
-\&`has', `wants', and `options' anywhere in an entry to make
+You can use the noise keywords 'and', 'with',
+\&'has', 'wants', and 'options' anywhere in an entry to make
it resemble English. They're ignored, but but can make entries much
easier to read at a glance. The punctuation characters ':', ';' and
\&',' are also ignored.
.PP
.SS Poll vs. Skip
-The `poll' verb tells fetchmail to query this host when it is run with
-no arguments. The `skip' verb tells
-.I fetchmail
+The 'poll' verb tells fetchmail to query this host when it is run with
+no arguments. The 'skip' verb tells
+.I fetchmail
not to poll this host unless it is explicitly named on the command
-line. (The `skip' verb allows you to experiment with test entries
+line. (The 'skip' verb allows you to experiment with test entries
safely, or easily disable entries for hosts that are temporarily down.)
.PP
.SS Keyword/Option Summary
Here are the legal options. Keyword suffixes enclosed in
square brackets are optional. Those corresponding to command-line
-options are followed by `-' and the appropriate option letter.
-If option is only relevant to a single mode of operation, it is noted
-as `s' or `m' for singledrop- or multidrop-mode, respectively.
+options are followed by '-' and the appropriate option letter.
+If option is only relevant to a single mode of operation, it is noted
+as 's' or 'm' for singledrop- or multidrop-mode, respectively.
Here are the legal global options:
Specify TCP/IP service port
T}
auth[enticate] \& \& T{
-Set authentication type (default `any')
+Set authentication type (default 'any')
T}
timeout -t \& T{
Server inactivity timeout in seconds (default 300)
tracepolls \& \& T{
Add poll tracing information to the Received header
T}
-netsec \& \& T{
-Pass in IPsec security option request.
-T}
principal \& \& T{
Set Kerberos principal (only useful with imap and kerberos)
T}
Keyword Opt Mode Function
_
user[name] -u \& T{
-Set remote user name
-(local user name if name followed by `here')
+Set remote user name
+(local user name if name followed by 'here')
T}
is \& \& T{
Connect local and remote user names
Don't delete seen messages from server
T}
flush -F \& T{
-Flush all seen messages before querying
+Flush all seen messages before querying (DANGEROUS)
+T}
+limitflush \& \& T{
+Flush all oversized messages before querying
T}
fetchall -a \& T{
Fetch all messages whether seen or not
.PP
Remember that all user options must \fIfollow\fR all server options.
.PP
-In the .fetchmailrc file, the `envelope' string argument may be
+In the .fetchmailrc file, the 'envelope' string argument may be
preceded by a whitespace-separated number. This number, if specified,
-is the number of such headers to skip (that is, an argument of 1
+is the number of such headers to skip over (that is, an argument of 1
selects the second header of the given type). This is sometime useful
-for ignoring bogus Received headers created by an ISP's local delivery
-agent.
+for ignoring bogus envelope headers created by an ISP's local delivery
+agent or internal forwards (through mail inspection systems, for
+instance).
.SS Keywords Not Corresponding To Option Switches
.PP
-The `folder' and `smtphost' options (unlike their command-line
+The 'folder' and 'smtphost' options (unlike their command-line
equivalents) can take a space- or comma-separated list of names
following them.
.PP
All options correspond to the obvious command-line arguments, except
-the following: `via', `interval', `aka', `is', `to', `dns'/`no dns',
-`checkalias'/`no checkalias', `password', `preconnect', `postconnect',
-`localdomains', `stripcr'/`no stripcr', `forcecr'/`no forcecr',
-`pass8bits'/`no pass8bits' `dropstatus/no dropstatus',
-`dropdelivered/no dropdelivered', `mimedecode/no mimedecode', `idle/no
-idle', and `no envelope'.
-.PP
-The `via' option is for if you want to have more
+the following: 'via', 'interval', 'aka', 'is', 'to', 'dns'/'no dns',
+\&'checkalias'/'no checkalias', 'password', 'preconnect', 'postconnect',
+\&'localdomains', 'stripcr'/'no stripcr', 'forcecr'/'no forcecr',
+\&'pass8bits'/'no pass8bits' 'dropstatus/no dropstatus',
+\&'dropdelivered/no dropdelivered', 'mimedecode/no mimedecode', 'idle/no
+idle', and 'no envelope'.
+.PP
+The 'via' option is for if you want to have more
than one configuration pointing at the same site. If it is present,
-the string argument will be taken as the actual DNS name of the
+the string argument will be taken as the actual DNS name of the
mailserver host to query.
This will override the argument of poll, which can then simply be a
distinct label for the configuration (e.g. what you would give on the
command line to explicitly query this host).
.PP
-The `interval' option (which takes a numeric argument) allows you to poll a
+The 'interval' option (which takes a numeric argument) allows you to poll a
server less frequently than the basic poll interval. If you say
-\&`interval N' the server this option is attached to will only be
-queried every N poll intervals.
+\&'interval N' the server this option is attached to will only be
+queried every N poll intervals.
.PP
-The `is' or `to' keywords associate the following local (client)
+The 'is' or 'to' keywords associate the following local (client)
name(s) (or server-name to client-name mappings separated by =) with
-the mailserver user name in the entry. If an is/to list has `*' as
+the mailserver user name in the entry. If an is/to list has '*' as
its last name, unrecognized names are simply passed through.
.PP
A single local name can be used to support redirecting your mail when
your username on the client machine is different from your name on the
mailserver. When there is only a single local name, mail is forwarded
to that local username regardless of the message's Received, To, Cc,
-and Bcc headers. In this case
+and Bcc headers. In this case
.I fetchmail
never does DNS lookups.
.PP
When there is more than one local name (or name mapping) the
\fIfetchmail\fR code does look at the Received, To, Cc, and Bcc
-headers of retrieved mail (this is `multidrop mode'). It looks for
-addresses with hostname parts that match your poll name or your `via',
-`aka' or `localdomains' options, and usually also for hostname parts
+headers of retrieved mail (this is 'multidrop mode'). It looks for
+addresses with hostname parts that match your poll name or your 'via',
+\&'aka' or 'localdomains' options, and usually also for hostname parts
which DNS tells it are aliases of the mailserver. See the discussion
-of `dns', `checkalias', `localdomains', and `aka' for details on how
+of 'dns', 'checkalias', 'localdomains', and 'aka' for details on how
matching addresses are handled.
.PP
If \fIfetchmail\fR cannot match any mailserver usernames or
localdomain addresses, the mail will be bounced.
-Normally it will be bounced to the sender, but if `nobounce' is on
+Normally it will be bounced to the sender, but if 'nobounce' is on
it will go to the postmaster (which in turn defaults to being the
calling user).
.PP
-The `dns' option (normally on) controls the way addresses from
+The 'dns' option (normally on) controls the way addresses from
multidrop mailboxes are checked. On, it enables logic to check each
-host address that doesn't match an `aka' or `localdomains' declaration
+host address that doesn't match an 'aka' or 'localdomains' declaration
by looking it up with DNS. When a mailserver username is recognized
attached to a matching hostname part, its local mapping is added to
the list of local recipients.
.PP
-The `checkalias' option (normally off) extends the lookups performed
-by the `dns' keyword in multidrop mode, providing a way to cope with
+The 'checkalias' option (normally off) extends the lookups performed
+by the 'dns' keyword in multidrop mode, providing a way to cope with
remote MTAs that identify themselves using their canonical name, while
they're polled using an alias.
When such a server is polled, checks to extract the envelope address
fail, and
-.IR fetchmail
-reverts to delivery using the To/Cc/Bcc headers (See below
-`Header vs. Envelope addresses').
+.IR fetchmail
+reverts to delivery using the To/Cc/Bcc headers (See below
+\&'Header vs. Envelope addresses').
Specifying this option instructs
-.IR fetchmail
+.IR fetchmail
to retrieve all the IP addresses associated with both the poll name
and the name used by the remote MTA and to do a comparison of the IP
addresses. This comes in handy in situations where the remote server
undergoes frequent canonical name changes, that would otherwise
-require modifications to the rcfile. `checkalias' has no effect if
-`no dns' is specified in the rcfile.
+require modifications to the rcfile. 'checkalias' has no effect if
+\&'no dns' is specified in the rcfile.
.PP
-The `aka' option is for use with multidrop mailboxes. It allows you
+The 'aka' option is for use with multidrop mailboxes. It allows you
to pre-declare a list of DNS aliases for a server. This is an
optimization hack that allows you to trade space for speed. When
.IR fetchmail ,
while processing a multidrop mailbox, grovels through message headers
looking for names of the mailserver, pre-declaring common ones can
save it from having to do DNS lookups. Note: the names you give
-as arguments to `aka' are matched as suffixes -- if you specify
-(say) `aka netaxs.com', this will match not just a hostname
-netaxs.com, but any hostname that ends with `.netaxs.com'; such as
+as arguments to 'aka' are matched as suffixes -- if you specify
+(say) 'aka netaxs.com', this will match not just a hostname
+netaxs.com, but any hostname that ends with '.netaxs.com'; such as
(say) pop3.netaxs.com and mail.netaxs.com.
.PP
-The `localdomains' option allows you to declare a list of domains
+The 'localdomains' option allows you to declare a list of domains
which fetchmail should consider local. When fetchmail is parsing
address lines in multidrop modes, and a trailing segment of a host
name matches a declared local domain, that address is passed through
to the listener or MDA unaltered (local-name mappings are \fInot\fR
applied).
.PP
-If you are using `localdomains', you may also need to specify \&`no
+If you are using 'localdomains', you may also need to specify \&'no
envelope', which disables \fIfetchmail\fR's normal attempt to deduce
an envelope address from the Received line or X-Envelope-To header or
-whatever header has been previously set by `envelope'. If you set `no
+whatever header has been previously set by 'envelope'. If you set 'no
envelope' in the defaults entry it is possible to undo that in
-individual entries by using `envelope <string>'. As a special case,
-\&`envelope "Received"' restores the default parsing of
+individual entries by using 'envelope <string>'. As a special case,
+\&'envelope "Received"' restores the default parsing of
Received lines.
.PP
The \fBpassword\fR option requires a string argument, which is the password
to be used with the entry's server.
.PP
-The `preconnect' keyword allows you to specify a shell command to be
+The 'preconnect' keyword allows you to specify a shell command to be
executed just before each time
.I fetchmail
-establishes a mailserver connection. This may be useful if you are
+establishes a mailserver connection. This may be useful if you are
attempting to set up secure POP connections with the aid of
.IR ssh (1).
If the command returns a nonzero status, the poll of that mailserver
will be aborted.
.PP
-Similarly, the `postconnect' keyword similarly allows you to specify a
+Similarly, the 'postconnect' keyword similarly allows you to specify a
shell command to be executed just after each time a mailserver
connection is taken down.
.PP
-The `forcecr' option controls whether lines terminated by LF only are
+The 'forcecr' option controls whether lines terminated by LF only are
given CRLF termination before forwarding. Strictly speaking RFC821
requires this, but few MTAs enforce the requirement it so this option
is normally off (only one such MTA, qmail, is in significant use at
-time of writing).
+time of writing).
.PP
-The `stripcr' option controls whether carriage returns are stripped
+The 'stripcr' option controls whether carriage returns are stripped
out of retrieved mail before it is forwarded. It is normally not
-necessary to set this, because it defaults to `on' (CR stripping
-enabled) when there is an MDA declared but `off' (CR stripping
-disabled) when forwarding is via SMTP. If `stripcr' and `forcecr' are
-both on, `stripcr' will override.
+necessary to set this, because it defaults to 'on' (CR stripping
+enabled) when there is an MDA declared but 'off' (CR stripping
+disabled) when forwarding is via SMTP. If 'stripcr' and 'forcecr' are
+both on, 'stripcr' will override.
.PP
-The `pass8bits' option exists to cope with Microsoft mail programs that
+The 'pass8bits' option exists to cope with Microsoft mail programs that
stupidly slap a "Content-Transfer-Encoding: 7bit" on everything. With
-this option off (the default) and such a header present,
+this option off (the default) and such a header present,
.I fetchmail
declares BODY=7BIT to an ESMTP-capable listener; this causes problems for
messages actually using 8-bit ISO or KOI-8 character sets, which will
be garbled by having the high bits of all characters stripped. If
-\&`pass8bits' is on,
+\&'pass8bits' is on,
.I fetchmail
is forced to declare BODY=8BITMIME to any ESMTP-capable listener. If
the listener is 8-bit-clean (as all the major ones now are) the right
thing will probably result.
.PP
-The `dropstatus' option controls whether nonempty Status and
+The 'dropstatus' option controls whether nonempty Status and
X-Mozilla-Status lines are retained in fetched mail (the default) or
discarded. Retaining them allows your MUA to see what messages (if
any) were marked seen on the server. On the other hand, it can
Status line in it has been seen. (Note: the empty Status lines
inserted by some buggy POP servers are unconditionally discarded.)
.PP
-The `dropdelivered' option controls whether Delivered-To headers will
-be kept in fetched mail (the default) or discarded. These headers are
+The 'dropdelivered' option controls whether Delivered-To headers will
+be kept in fetched mail (the default) or discarded. These headers are
added by Qmail and Postfix mailservers in order to avoid mail loops but
may get in your way if you try to "mirror" a mailserver within the same
domain. Use with caution.
.PP
-The `mimedecode' option controls whether MIME messages using the
+The 'mimedecode' option controls whether MIME messages using the
quoted-printable encoding are automatically converted into pure 8-bit
data. If you are delivering mail to an ESMTP-capable, 8-bit-clean
listener (that includes all of the major MTAs like sendmail), then
character-set information and can lead to bad results if the encoding
of the headers differs from the body encoding.
.PP
-The `idle' option is intended to be used with IMAP servers supporting
+The 'idle' option is intended to be used with IMAP servers supporting
the RFC2177 IDLE command extension, but does not strictly require it.
If it is enabled, and fetchmail detects that IDLE is supported, an
IDLE will be issued at the end of each poll. This will tell the IMAP
ever be polled.
.PP
-The `properties' option is an extension mechanism. It takes a string
+The 'properties' option is an extension mechanism. It takes a string
argument, which is ignored by fetchmail itself. The string argument may be
used to store configuration information for scripts which require it.
-In particular, the output of `--configdump' option will make properties
+In particular, the output of '--configdump' option will make properties
associated with a user entry readily available to a Python script.
.PP
.SS Miscellaneous Run Control Options
-The words `here' and `there' have useful English-like
-significance. Normally `user eric is esr' would mean that
-mail for the remote user `eric' is to be delivered to `esr',
-but you can make this clearer by saying `user eric there is esr here',
-or reverse it by saying `user esr here is eric there'
+The words 'here' and 'there' have useful English-like
+significance. Normally 'user eric is esr' would mean that
+mail for the remote user 'eric' is to be delivered to 'esr',
+but you can make this clearer by saying 'user eric there is esr here',
+or reverse it by saying 'user esr here is eric there'
.PP
-Legal protocol identifiers for use with the `protocol' keyword are:
+Legal protocol identifiers for use with the 'protocol' keyword are:
.sp
.nf
auto (or AUTO)
.fi
.sp
.PP
-Legal authentication types are `any', `password', `kerberos', 'kerberos_v5'
-and `gssapi', `cram-md5', `otp', `ntlm', `ssh`.
-The `password' type specifies authentication by normal transmission of a
-password (the password may be plain text or subject to
-protocol-specific encryption as in APOP); `kerberos' tells
-\fIfetchmail\fR to try to get a Kerberos ticket at the start of each
-query instead, and send an arbitrary string as the password; and
-`gssapi' tells fetchmail to use GSSAPI authentication. See the description
-of the `auth' keyword for more.
-.PP
-Specifying `kpop' sets POP3 protocol over port 1109 with Kerberos V4
+Legal authentication types are 'any', 'password', 'kerberos',
+\&'kerberos_v4', 'kerberos_v5' and 'gssapi', 'cram-md5', 'otp', 'msn'
+(only for POP3), 'ntlm', 'ssh'. The 'password' type specifies
+authentication by normal transmission of a password (the password may be
+plain text or subject to protocol-specific encryption as in APOP);
+\&'kerberos' tells \fIfetchmail\fR to try to get a Kerberos ticket at the
+start of each query instead, and send an arbitrary string as the
+password; and 'gssapi' tells fetchmail to use GSSAPI authentication.
+See the description of the 'auth' keyword for more.
+.PP
+Specifying 'kpop' sets POP3 protocol over port 1109 with Kerberos V4
authentication. These defaults may be overridden by later options.
.PP
-There are currently four global option statements; `set logfile'
+There are currently four global option statements; 'set logfile'
followed by a string sets the same global specified by --logfile. A
-command-line --logfile option will override this. Also, `set daemon'
+command-line --logfile option will override this. Also, 'set daemon'
sets the poll interval as --daemon does. This can be overridden by a
command-line --daemon option; in particular --daemon 0 can be used to
-force foreground operation. The `set postmaster' statement sets the
+force foreground operation. The 'set postmaster' statement sets the
address to which multidrop mail defaults if there are no local
-matches. Finally, `set syslog' sends log messages to syslogd(8).
+matches. Finally, 'set syslog' sends log messages to syslogd(8).
.SH INTERACTION WITH RFC 822
When trying to determine the originating address of a message,
-fetchmail looks through headers in the following order:
+fetchmail looks through headers in the following order:
.sp
.nf
Return-Path:
In multidrop mode, destination headers are processed as follows:
First, fetchmail looks for the Received: header (or whichever one is
-specified by the `envelope' option) to determine the local
+specified by the 'envelope' option) to determine the local
recipient address. If the mail is addressed to more than one recipient,
the Received line won't contain any information regarding recipient addresses.
Then fetchmail looks for the Resent-To:, Resent-Cc:, and Resent-Bcc:
-lines. If they exists, they should contain the final recipients and
+lines. If they exist, they should contain the final recipients and
have precedence over their To:/Cc:/Bcc: counterparts. If the Resent-*
-lines doesn't exist, the To:, Cc:, Bcc: and Apparently-To: lines are
+lines don't exist, the To:, Cc:, Bcc: and Apparently-To: lines are
looked for. (The presence of a Resent-To: is taken to imply that the
person referred by the To: address has already received the original
-copy of the mail).
+copy of the mail.)
.SH CONFIGURATION EXAMPLES
Note that although there are password declarations in a good many
Basic format is:
.nf
- poll SERVERNAME protocol PROTOCOL username NAME password PASSWORD
+ poll SERVERNAME protocol PROTOCOL username NAME password PASSWORD
.fi
.PP
Example:
poll other.provider.net proto pop2 user "John.Smith" pass "My^Hat"
.fi
-Here's a version of those two with more whitespace and some noise words:
+Here's a version of those two with more whitespace and some noise words:
.nf
poll pop.provider.net proto pop3
.fi
You may have an initial server description headed by the keyword
-`defaults' instead of `poll' followed by a name. Such a record
+\&'defaults' instead of 'poll' followed by a name. Such a record
is interpreted as defaults for all queries to use. It may be overwritten
by individual server descriptions. So, you could write:
It's possible to specify more than one user per server (this is only
likely to be useful when running fetchmail in daemon mode as root).
-The `user' keyword leads off a user description, and every user specification
+The 'user' keyword leads off a user description, and every user specification
in a multi-user entry must include it. Here's an example:
.nf
user jones with pass "secret2" is "jjones" here keep
.fi
-This associates the local username `smith' with the pop.provider.net
-username `jsmith' and the local username `jjones' with the
-pop.provider.net username `jones'. Mail for `jones' is kept on the
+This associates the local username 'smith' with the pop.provider.net
+username 'jsmith' and the local username 'jjones' with the
+pop.provider.net username 'jones'. Mail for 'jones' is kept on the
server after download.
.PP
Here's what a simple retrieval configuration for a multi-drop mailbox
user maildrop with pass secret1 to golux 'hurkle'='happy' snark here
.fi
-This says that the mailbox of account `maildrop' on the server is a
+This says that the mailbox of account 'maildrop' on the server is a
multi-drop box, and that messages in it should be parsed for the
-server user names `golux', `hurkle', and `snark'. It further
-specifies that `golux' and `snark' have the same name on the
-client as on the server, but mail for server user `hurkle' should be
-delivered to client user `happy'.
+server user names 'golux', 'hurkle', and 'snark'. It further
+specifies that 'golux' and 'snark' have the same name on the
+client as on the server, but mail for server user 'hurkle' should be
+delivered to client user 'happy'.
.PP
Here's an example of another kind of multidrop connection:
user maildrop with pass secret1 to * here
.fi
-This also says that the mailbox of account `maildrop' on the server is
+This also says that the mailbox of account 'maildrop' on the server is
a multi-drop box. It tells fetchmail that any address in the
loonytoons.org or toons.org domains (including sub-domain addresses like
-`joe@daffy.loonytoons.org') should be passed through to the local SMTP
+\&'joe@daffy.loonytoons.org') should be passed through to the local SMTP
listener without modification. Be careful of mail loops if you do this!
.PP
Here's an example configuration using ssh and the plugin option. The
runs of messages may be generated when copies of a message addressed
to multiple users are delivered to a multidrop box.
-.SS Header vs. Envelope addresses
+.SS Header vs. Envelope addresses
The fundamental problem is that by having your mailserver toss several
peoples' mail in a single maildrop box, you may have thrown away
potentially vital information about who each piece of mail was
-actually addressed to (the `envelope address', as opposed to the
-header addresses in the RFC822 To/Cc/Bcc headers). This `envelope
-address' is the address you need in order to reroute mail properly.
+actually addressed to (the 'envelope address', as opposed to the
+header addresses in the RFC822 To/Cc headers - the Bcc is not available
+at the receiving end). This 'envelope address' is the address you need
+in order to reroute mail properly.
.PP
-Sometimes
+Sometimes
.I fetchmail
can deduce the envelope address. If the mailserver MTA is
.I sendmail
and the item of mail had just one recipient, the MTA will have written
-a `by/for' clause that gives the envelope addressee into its Received
+a 'by/for' clause that gives the envelope addressee into its Received
header. But this doesn't work reliably for other MTAs, nor if there is
more than one recipient. By default, \fIfetchmail\fR looks for
envelope addresses in these lines; you can restore this default with
--E "Received" or \&`envelope Received'.
+-E "Received" or \&'envelope Received'.
.PP
-Alternatively, some SMTP listeners and/or mail servers insert a header
+.B As a better alternative,
+some SMTP listeners and/or mail servers insert a header
in each message containing a copy of the envelope addresses. This
-header (when it exists) is often `X-Envelope-To'. Fetchmail's
-assumption about this can be changed with the -E or `envelope' option.
-Note that writing an envelope header of this kind exposes the names of
-recipients (including blind-copy recipients) to all receivers of the
-messages; it is therefore regarded by some administrators as a
-security/privacy problem.
-.PP
-A slight variation of the `X-Envelope-To' header is the `Delivered-To' put
-by qmail to avoid mail loops. It will probably prefix the user name with a
-string that normally matches the user's domain. To remove this prefix you
-can use the -Q or `qvirtual' option.
-.PP
-Sometimes, unfortunately, neither of these methods works. When they
-all fail, fetchmail must fall back on the contents of To/Cc/Bcc
-headers to try to determine recipient addressees -- and these are not
-reliable. In particular, mailing-list software often ships mail with
-only the list broadcast address in the To header.
+header (when it exists) is often 'X-Original-To', 'Delivered-To' or
+'X-Envelope-To'. Fetchmail's assumption about this can be changed with
+the -E or 'envelope' option. Note that writing an envelope header of
+this kind exposes the names of recipients (including blind-copy
+recipients) to all receivers of the messages, so the upstream must store
+one copy of the message per recipient to avoid becoming a privacy problem.
+.PP
+Postfix, since version 2.0, writes an X-Original-To: header which
+contains a copy of the envelope as it was received.
+.PP
+Qmail and Postfix generally write a 'Delivered-To' header upon
+delivering the message to the mail spool and use it to avoid mail loops.
+Qmail virtual domains however will prefix the user name with a string
+that normally matches the user's domain. To remove this prefix you can
+use the -Q or 'qvirtual' option.
+.PP
+Sometimes, unfortunately, neither of these methods works. That is the
+point when you should contact your ISP and ask them to provide such an
+envelope header, and you should not use multidrop in this situation.
+When they all fail, fetchmail must fall back on the contents of To/Cc
+headers (Bcc headers are not available - see below) to try to determine
+recipient addressees -- and these are unreliable.
+In particular, mailing-list software often ships mail with only
+the list broadcast address in the To header.
+.PP
+.B Note that a future version of fetchmail may remove To/Cc parsing!
.PP
When
.I fetchmail
cannot deduce a recipient address that is local, and the intended
recipient address was anyone other than fetchmail's invoking user,
-mail will get lost. This is what makes the multidrop feature risky.
+.B mail will get lost.
+This is what makes the multidrop feature risky without proper envelope
+information.
.PP
A related problem is that when you blind-copy a mail message, the Bcc
-information is carried \fIonly\fR as envelope address (it's not put
-in the headers fetchmail can see unless there is an X-Envelope
-header). Thus, blind-copying to someone who gets mail over a
-fetchmail link will fail unless the the mailserver host routinely
-writes X-Envelope or an equivalent header into messages in your maildrop.
+information is carried \fIonly\fR as envelope address (it's removed from
+the headers by the sending mail server, so fetchmail can see it only if
+there is an X-Envelope-To header). Thus, blind-copying to someone who
+gets mail over a fetchmail multidrop link will fail unless the the
+mailserver host routinely writes X-Envelope-To or an equivalent header
+into messages in your maildrop.
+.PP
+\fBIn conclusion, mailing lists and Bcc'd mail can only work if the
+server you're fetching from (1) stores one copy of the message per
+recipient in \fBIyour\fP domain and (2) records the envelope
+information in a special header (X-Original-To, Delivered-To,
+X-Envelope-To).\fR
.SS Good Ways To Use Multidrop Mailboxes
Multiple local names can be used to administer a mailing list from the
client side of a \fIfetchmail\fR collection. Suppose your name is
-\&`esr', and you want to both pick up your own mail and maintain a mailing
+\&'esr', and you want to both pick up your own mail and maintain a mailing
list called (say) "fetchmail-friends", and you want to keep the alias
list on your client machine.
.PP
-On your server, you can alias \&`fetchmail-friends' to `esr'; then, in
-your \fI.fetchmailrc\fR, declare \&`to esr fetchmail-friends here'.
-Then, when mail including `fetchmail-friends' as a local address
+On your server, you can alias \&'fetchmail-friends' to 'esr'; then, in
+your \fI.fetchmailrc\fR, declare \&'to esr fetchmail-friends here'.
+Then, when mail including 'fetchmail-friends' as a local address
gets fetched, the list name will be appended to the list of
recipients your SMTP listener sees. Therefore it will undergo alias
-expansion locally. Be sure to include `esr' in the local alias
+expansion locally. Be sure to include 'esr' in the local alias
expansion of fetchmail-friends, or you'll never see mail sent only to
the list. Also be sure that your listener has the "me-too" option set
(sendmail's -oXm command-line option or OXm declaration) so your name
This trick is not without its problems, however. You'll begin to see
this when a message comes in that is addressed only to a mailing list
you do \fInot\fR have declared as a local name. Each such message
-will feature an `X-Fetchmail-Warning' header which is generated
+will feature an 'X-Fetchmail-Warning' header which is generated
because fetchmail cannot find a valid local name in the recipient
addresses. Such messages default (as was described above) to being
sent to the local user running
but the program has no way to know that that's actually the right thing.
.SS Bad Ways To Abuse Multidrop Mailboxes
-Multidrop mailboxes and
+Multidrop mailboxes and
.I fetchmail
serving multiple users in daemon mode do not mix. The problem, again, is
mail from mailing lists, which typically does not have an individual
-recipient address on it. Unless
+recipient address on it. Unless
.I fetchmail
can deduce an envelope address, such mail will only go to the account
running fetchmail (probably root). Also, blind-copied users are very
likely never to see their mail at all.
.PP
-If you're tempted to use
-.I fetchmail
+If you're tempted to use
+.I fetchmail
to retrieve mail for multiple users from a single mail drop via POP or
IMAP, think again (and reread the section on header and envelope
addresses above). It would be smarter to just let the mail sit in the
to haunt you.
.SS Speeding Up Multidrop Checking
-Normally, when multiple users are declared
+Normally, when multiple users are declared
.I fetchmail
extracts recipient addresses as described above and checks each host
part with DNS to see if it's an alias of the mailserver. If so, the
-name mappings described in the to ... here declaration are done and
+name mappings described in the "to ... here" declaration are done and
the mail locally delivered.
.PP
-This is the safest but also slowest method. To speed it up,
-pre-declare mailserver aliases with `aka'; these are checked before
-DNS lookups are done. If you're certain your aka list contains
+This is a convenient but also slow method. To speed
+it up, pre-declare mailserver aliases with 'aka'; these are checked
+before DNS lookups are done. If you're certain your aka list contains
.B all
-DNS aliases of the mailserver (and all MX names pointing at it)
-you can declare `no dns' to suppress DNS lookups entirely and
+DNS aliases of the mailserver (and all MX names pointing at it - note
+this may change in a future version)
+you can declare 'no dns' to suppress DNS lookups entirely and
\fIonly\fR match against the aka list.
.SH EXIT CODES
-To facilitate the use of
+To facilitate the use of
.I fetchmail
in shell scripts, an exit code is returned to give an indication
of what occurred during a given connection.
.PP
-The exit codes returned by
+The exit codes returned by
.I fetchmail
are as follows:
.IP 0
just treat this as an 'unrecoverable error'. This error can also be
because a protocol fetchmail wants to use is not listed in /etc/services.
.IP 3
-The user authentication step failed. This usually means that a bad
-user-id, password, or APOP id was specified. Or it may mean that you
+The user authentication step failed. This usually means that a bad
+user-id, password, or APOP id was specified. Or it may mean that you
tried to run fetchmail under circumstances where it did not have
standard input attached to a terminal and could not prompt for a
missing password.
.IP 4
Some sort of fatal protocol error was detected.
.IP 5
-There was a syntax error in the arguments to
+There was a syntax error in the arguments to
.IR fetchmail .
.IP 6
The run control file had bad permissions.
.I fetchmail
timed out while waiting for the server.
.IP 8
-Client-side exclusion error. This means
+Client-side exclusion error. This means
.I fetchmail
either found another copy of itself already running, or failed in such
a way that it isn't sure whether another copy is running.
talking to qpopper or other servers that can respond with "lock busy"
or some similar text containing the word "lock".
.IP 10
-The
+The
.I fetchmail
run failed while trying to do an SMTP port open or transaction.
.IP 11
.TP 5
~/.fetchids
default location of file associating hosts with last message IDs seen
-(used only with newer RFC1725-compliant POP3 servers supporting the
+(used only with newer RFC1939-compliant POP3 servers supporting the
UIDL command).
.TP 5
~/.fetchmail.pid
lock file to help prevent concurrent runs (non-root mode).
.TP 5
-~/.netrc
+~/.netrc
your FTP run control file, which (if present) will be searched for
passwords as a last resort before prompting for one interactively.
.TP 5
whichever of these is appropriate to wake it up.
.SH BUGS AND KNOWN PROBLEMS
+.PP
+The assumptions that the DNS and in particular the checkalias options
+make are not often sustainable. For instance, it has become uncommon for
+an MX server to be a POP3 or IMAP server at the same time. Therefore the
+MX lookups may go away in a future release.
+.PP
The mda and plugin options interact badly. In order to collect error
status from the MDA, fetchmail has to change its normal signal
handling so that dead plugin processes don't get reaped until the end
zombies accumulate. So either don't deliver to a MDA using plugins or
risk being overrun by an army of undead.
.PP
+The --interface option does not support IPv6 and it is doubtful if it
+ever will, since there is no portable way to query interface IPv6
+addresses.
+.PP
The RFC822 address parser used in multidrop mode chokes on some
@-addresses that are technically legal but bizarre. Strange uses of
quoting and embedded comments are likely to confuse it.
.PP
Use of the %F or %T escapes in an mda option could open a security
hole, because they pass text manipulable by an attacker to a shell
-command. Potential shell characters are replaced by `_' before
+command. Potential shell characters are replaced by '_' before
execution. The hole is further reduced by the fact that fetchmail
temporarily discards any suid privileges it may have while running the
MDA. For maximum safety, however, don't use an mda command containing
If you modify a
.I ~/.fetchmailrc
while a background instance is running and break the syntax, the
-background instance will die silently. Unfortunately, it can't
+background instance will die silently. Unfortunately, it can't
die noisily because we don't yet know whether syslog should be enabled.
On some systems, fetchmail dies quietly even if there is no syntax
error; this seems to have something to do with buggy terminal ioctl
The -f - option (reading a configuration from stdin) is incompatible
with the plugin option.
.PP
-The `principal' option only handles Kerberos IV, not V.
+The 'principal' option only handles Kerberos IV, not V.
.PP
Send comments, bug reports, gripes, and the like to the
-fetchmail-friends list <fetchmail-friends@lists.ccil.org>. An HTML FAQ is
+fetchmail-devel list <fetchmail-devel@lists.berlios.de>. An HTML FAQ is
available at the fetchmail home page; surf to
http://fetchmail.berlios.de/ or do a WWW search for pages with
-`fetchmail' in their titles.
+\&'fetchmail' in their titles.
.SH AUTHOR
Eric S. Raymond <esr@snark.thyrsus.com>. Too many other people to
-name here have contributed code and patches.
-This program is descended from and replaces
-.IR popclient ,
-by Carl Harris <ceharris@mal.com>; the internals have become quite different,
+name here have contributed code and patches.
+This program is descended from and replaces
+.IR popclient ,
+by Carl Harris <ceharris@mal.com>; the internals have become quite different,
but some of its interface design is directly traceable to that
ancestral program.
.PP
+This manual page has been improved by R.\ Hannes Beinert.
+.PP
Fetchmail is currently maintained by Matthias Andree and Rob Funk.
.SH SEE ALSO
GSSAPI:
RFC 1508.
.TP 5
-TLS
+TLS:
RFC 2595.
-