.\" Copyright 1993-95 by Carl Harris, Jr. Copyright 1996 by Eric S. Raymond
.\" All rights reserved.
.\" For license terms, see the file COPYING in this directory.
-.TH popclient LOCAL
+.TH fetchmail LOCAL
.SH NAME
-popclient \- retrieve mail from a mailserver using POP or IMAP
+fetchmail \- retrieve mail from a mailserver using POP2, POP3, APOP, or IMAP
.SH SYNOPSIS
-.B popclient
+.B fetchmail
[\fI options \fR] \fI [server-host...]\fR
.SH DESCRIPTION
-.I popclient
-is a mail retrieval client which supports
-POP2 (as specified in RFC 937), POP3 (RFC 1725), IMAP2bis (as
-implemented by the 4.4BSD imapd program), and IMAP4 (RFC1730).
-It can use (but does not require) the RPOP and LAST facilities
-removed from later POP3 versions.
-.PP
-The,
-.I popclient
-program may be used to download mail in batch from the remote
-mailserver specified by
-.I host
-to a mail folder on the local disk. The retrieved mail can then be
-manipulated using a local mail reader, such as
-.I mail
-or
-.I elm.
+.I fetchmail
+is a batch mail retrieval utility intended to be used over on-demand
+TCP/IP links (such as SLIP or PPP connections). It fetches mail from
+remote mail servers and forwards it to your local (client) machine's
+delivery system, where it can then be be read by normal mail user
+agents such as \fIelm\fR(1) or \fIMail\fR(1).
.PP
-To facilitate the use of
-.I popclient
-in scripts, pipelines, etc, it returns an appropriate exit code upon
-termination -- see EXIT CODES below.
+The
+.I fetchmail
+program can gather mail from servers supporting POP2 (as specified in RFC
+937), POP3 (RFC 1725), IMAP2bis (as implemented by the 4.4BSD imapd
+program), and IMAP4 (RFC1730). It can use (but does not require) the
+RPOP and LAST facilities removed from later POP3 versions.
.PP
The behavior of
-.I popclient
-is controlled by comand-line options and a control file,
-.I ~/.poprc
+.I fetchmail
+is controlled by comand-line options and a run control file,
+.I ~/.fetchrc
the syntax of which we describe below. Command-line options override
-.I ~/.poprc
+.I ~/.fetchrc
declarations.
+.PP
+To facilitate the use of
+.I fetchmail
+in scripts, pipelines, etc, it returns an appropriate exit code upon
+termination -- see EXIT CODES below.
.SH OPTIONS
Each server name that you specify (following the options on the
command line) will be queried. If you don't specify any servers
on the command line, each server in your
-.I ~/.poprc
+.I ~/.fetchrc
file will be queried.
.TP
.B \-2
.B \-S host, --smtphost host
Specify an SMTP forwarding host (other than localhost). Normally
fetched mail is delivered by SMTP over a socket to the client machine
-.I popclient
+.I fetchmail
is running on (this simulates the way mail would
be delivered to the client by a normal Internet TCP/IP connection).
With this option you can specify another host to deliver to.
.TP
.B \-m mda, --mda mda
-Specify a mail delivery agent to use. This can be used to pass
-fetched mail to programs like procmail. If the MDA string contains
-%s, that escape will be expanded into your username on the client
-machine.
+Specify a mail delivery agent to use. See OUTPUT OPTIONS below for a
+complete description.
.TP
.B \-o folder, --local folder
Causes retrieved messages to be appended to file named by the folder
options on the same command line.
.TP
.B \-F, --flush
-POP3 only. Delete old (previously retrieved) messages from the mailserver
+POP3/IMAP only. Delete old (previously retrieved) messages from the mailserver
before retrieving new messages.
.TP
-.B \-f pathname, --poprc pathname
-Specify an alternate name for the .poprc file.
+.B \-f pathname, --fetchrc pathname
+Specify an alternate name for the .fetchrc run control file.
.TP
.B \-i pathname, --idfile pathname
-Specify an alternate name for the .popids file.
+Specify an alternate name for the .fetchids file.
.TP
.B \-k, --keep
Keep retrieved messages in folder on remote mailserver. Normally, messages
are deleted from the folder on the mailserver after they have been retrieved
(unless
-.I popclient
+.I fetchmail
was compiled with the KEEP_IS_DEFAULT option). Specifying the
.B keep
option causes retrieved messages to remain in your folder on the mailserver.
.TP
.B \-K, --kill
Delete retrieved messages from the remote mailserver. If
-.I popclient
+.I fetchmail
is compiled with the KEEP_IS_DEFAULT option, the
.B kill
option forces retrieved mail to be deleted.
.B \-p, \--protocol proto
Specify the protocol to used when communicating with the remote
mailserver. If no protocol is specified,
-.I popclient
+.I fetchmail
will try each of the supported protocols in turn, terminating after
any successful attempt.
.I proto
.RS
.IP IMAP
IMAP2bis, a compatible subset of IMAP4.
-.IP POP2
+.IP POP2
Post Office Protocol 2
.IP POP3
Post Office Protocol 3
Specifies the user idenfication to be used when logging-in to the mailserver.
The appropriate user identification is both server and user-dependent.
The default is your login name on the machine that is running
-.I popclient.
+.I fetchmail.
See USER AUTHENTICATION below for a complete description.
.TP
.B \-v, --verbose
Verbose mode. All control messages passed between
-.I popclient
+.I fetchmail
and the mailserver are echoed to stderr. Specifying
.B verbose
causes normal progress/status messages which would be redundant or meaningless
.TP
.B \-N, --norewrite
Normally,
-.I popclient
+.I fetchmail
edits RFC-822 address headers (To, From, Cc, Bcc, and Reply-To) in
fetched mail so that any mail IDs local to the server are expanded to
full addresses (@ and the POP host name are appended). This enables
.TP
.B \-V, --version
Displays the version information for your copy of
-.I popclient.
+.I fetchmail.
No POP connection is made.
Instead, for each server specified, all option information
that would be computed if
-.I popclient.
+.I fetchmail.
were connecting to that server is displayed.
.TP
.SH USER AUTHENTICATION
User authentication in
-.I popclient
+.I fetchmail
is very much like the authentication mechanism of
.I ftp(1).
The correct user-id and password depend upon the underlying security
.PP
If the mailserver is a Unix machine on which you have an ordinary user
account, your regular login name and password are used with
-.I popclient.
+.I fetchmail.
If you use the same login name on both the server and the client machines,
you needn't worry about specifying a user-id with the
.B \-u
.B \-u
option. e.g. if your login name is 'jsmith' on a machine named 'mailgrunt',
you would start
-.I popclient
+.I fetchmail
as follows:
.IP
-popclient -u jsmith mailgrunt
+fetchmail -u jsmith mailgrunt
.PP
The default behavior of
-.I popclient
+.I fetchmail
is to prompt you for your mailserver password before the POP connection is
established. This is the safest way to use
-.I popclient
+.I fetchmail
and ensures that your password will not be compromised. You may also specify
your password in your
-.I ~/.poprc
+.I ~/.fetchrc
file. This is convenient when using
-.I popclient
+.I fetchmail
with automated scripts.
.PP
On mailservers that do not provide ordinary user accounts, your user-id and
POP3 versions up to the RFC1225 version supported an alternate
authentication mechanism called RPOP intended to remove the security
risk inherent in sending unencrypted account passwords across the net
-(in RFC1460 this facility was replaced with APOP). If your .poprc
+(in RFC1460 this facility was replaced with APOP). If your .fetchrc
file specifies an RPOP id and a connection port in the privileged
range (1..1024),
-.I popclient will
+.I fetchmail will
ship the id with an RPOP command rather than sending a password.
+(Note: you'll need to be running fetchmail setuid root for RPOP to
+work --
+.I fetchmail
+has to bind to a privileged port locally in order for the mail
+server to believe it's allowed to bind to a privileged remote port.)
.PP
.SH OUTPUT OPTIONS
The default behavior of
-.I popmail
-is to ship mail to the the SMTP port on the machine it is running on
-(localhost), as though it were being passed over a normal TCP/IP link.
+.I fetchmail
+is to ship mail via SMTP to port 25 on the machine it is running on
+(localhost), just as though it were being passed in over a normal TCP/IP link.
This normally results in the mail being delivered locally via your
system's default MDA (Mail Delivery Agent, usually
.I /usr/lib/sendmail
but your system may use a different MDA).
.PP
-You can force mail to be passed to an MDA directly with the -mda or -m option.
-Some possible MDAs are "/usr/lib/sendmail -oem %s", "/usr/formail",
-and "/usr/bin/deliver %s". This shouldn't be necessary unless
-for some reason you want to bypass your system's default MDA.
+You can force mail to be passed to an MDA directly with the -mda or -m
+option. Some possible MDAs are "/usr/lib/sendmail -oem %s",
+"/usr/formail", and "/usr/bin/deliver %s" (if the MDA string contains
+%s, that escape will be expanded into your username on the client
+machine). This shouldn't be necessary unless for some reason you
+want to bypass your system's default MDA.
.PP
Using the
.B \-o
option, you can specify a mail folder to which retrieved
messages will be appended;
-.I popclient
+.I fetchmail
always writes the retrieved messages using Unix mail folder format so
the folder will be parsed correctly by Unix mail programs such as
.I elm
mail from a machine called 'mailgrunt' stored in the
.I mbox
file in your home directory, you would start
-.I popclient
+.I fetchmail
as follows:
.IP
-popclient \-o $HOME/mbox mailgrunt
+fetchmail \-o $HOME/mbox mailgrunt
.PP
Note that the folder specified with
.B \-o
-is write-locked while popclient is writing to it,
+is write-locked while fetchmail is writing to it,
.PP
-.I popclient
+.I fetchmail
can be used in a shell pipeline by using the
.B \-c
option. In this mode,
-.I popclient
+.I fetchmail
writes the retrieved messages to stdout, instead of a mail folder. This would
allow you, for instance, to pass the incoming mail through a filter that
discards mail marked as 'Precedence: junk'. Suppose you've written an AWK
and write it to a folder called 'realmail' in your home directory would be:
.nf
- popclient -c mailgrunt | awk -f dumpjunk.awk >$HOME/realmail
+ fetchmail -c mailgrunt | awk -f dumpjunk.awk >$HOME/realmail
.fi
.PP
The progress/status messages written to stderr when the
does not function incorrectly. The safest bet would be something like:
.nf
- popclient -k -c mailgrunt | myfilter >$HOME/filtered.mail
+ fetchmail -k -c mailgrunt | myfilter >$HOME/filtered.mail
.fi
.PP
followed by
.nf
- popclient -c mailgrunt > /dev/null
+ fetchmail -c mailgrunt > /dev/null
.fi
.PP
when you're sure the messages were correctly processed by 'myfilter'.
or
.B -d
option runs
-.I popmail
+.I fetchmail
in daemon mode. You must specify a numeric argument which is a
polling interval in seconds.
.PP
In daemon mode,
-.I popmail
+.I fetchmail
puts itself in background and runs forever, querying each specified
host and then sleeping for the given polling interval.
.PP
Simply invoking
.IP
-popmail -d 900
+fetchmail -d 900
.PP
will, therefore, poll the hosts described in your
-.I ~/.poprc
+.I ~/.fetchrc
file once every fifteen minutes.
.PP
Only one daemon process is permitted per user; in daemon mode,
-.I popclient
+.I fetchmail
makes a per-user lockfile to guarantee this. The option
.B --quit
will kill a running daemon process.
option allows you to redirect status messages emitted while in daemon
mode into a specified logfile (follow the option with the logfile name).
This is primarily useful for debugging configurations.
-.SH THE POPRC FILE
-The preferred way to set up popclient (and the only way if you want to
-specify a password) is to write a .poprc file in your home directory.
-To protect the security of your passwords, your ~/.poprc may not have
+.SH THE FETCHRC FILE
+The preferred way to set up fetchmail (and the only way if you want to
+specify a password) is to write a .fetchrc file in your home directory.
+To protect the security of your passwords, your ~/.fetchrc may not have
more than u+r,u+w permissions;
-.I popclient
+.I fetchmail
will complain and exit otherwise.
.PP
Comments begin with a '#' and extend through the end of the line.
.fi
.SH EXIT CODES
To facilitate the use of
-.I popclient
+.I fetchmail
in shell scripts and the like, an exit code is returned to give an indication
of what occured during a given POP connection. The exit code can be tested
by the script and appropriate action taken.
.PP
A simple example follows. This Bourne shell script executes
-.I popclient
+.I fetchmail
and, if some messages were successfully retrieved from a mailserver retrieved
from the command line, it starts the
.I mail
.EX 0
#!/bin/sh
-if popclient $1
+if fetchmail $1
then
mail
else
.EE
.PP
The exit codes returned by
-.I popclient
+.I fetchmail
are as follows:
.IP 0
One or more messages were successfully retrieved.
Some sort of fatal protocol error was detected.
.IP 5
There was a syntax error in the arguments to
-.I popclient.
+.I fetchmail.
.IP 6
Some kind of I/O woes occurred when writing to the local folder.
.IP 7
There was an error condition reported by the server (POP3 only).
.IP 8
Exclusion error. This means
-.I popclient
+.I fetchmail
either found another copy of itself already running, or failed in such
a way that it isn't sure whether another copy is running.
.IP 9
The
-.I popclient.
+.I fetchmail.
run failed while trying to do an SMTP port open or transaction.
.IP 10
Something totally undefined occured. This is usually caused by a bug within
-.I popclient.
+.I fetchmail.
Do let me know if this happens.
.PP
When
-.I popclient
+.I fetchmail
queries more than one host, the returned status is that of the last
host queried.
.SH AUTHOR
-.I popclient
-was originated by Carl Harris at Virginia Polytechnic Institute and State
-University (a.k.a. Virginia Tech). Version 3.0 was extensively improved
-by Eric S. Raymond <esr@snark.thyrsus.com> and is now maintained by esr.
+.I fetchmail
+was originated (under the name `popclient') by Carl Harris at Virginia
+Polytechnic Institute and State University (a.k.a. Virginia Tech).
+Version 3.0 of popclient was extensively rewritten and improved by
+Eric S. Raymond <esr@snark.thyrsus.com>. The program's name was
+then changed to
+.I fetchmail
+to reflect both the presence of IMAP support and the symmetry with sendmail
+created by the new SMTP forwarding default.
.PP
.SH FILES
.TP 5
-~/.poprc
+~/.fetchrc
default configuration file
-~/.popids
+.TP 5
+~/.fetchids
default location of file associating hosts with last message IDs seen
(used only with newer RFC1725-compliant servers supporting the UIDL command).
+.TP 5
+${TMPDIR}/fetchmail-${HOST}-${USER}
+lock file to help prevent concurrent runs.
+.SH ENVIRONMENT
+For correct initialization,
+.I fetchmail
+requires either that both the USER and HOME environment variables are
+correctly set, or that \fBgetpwuid\fR(3) be able to retrieve a password
+entry from your user ID.
.SH BUGS
Running more than one concurrent instance of
-.I popclient
+.I fetchmail
on the same mailbox may cause messages to be lost or remain unfetched.
.PP
-When using POP2, the --smtphost option doesn't work, and mail headers
-are not rewritten to enable replies as described under --norewrite.
-This isn't a protocol problem, it's because the developer couldn't
-find a POP2 server to test the necessary code reorganization with.
-.PP
The --remotefolder option doesn't work with POP3, the protocol won't
support it.
.PP
The RPOP support, and the UIDL support for RFC1725-compliant servers
-without LAST, are not yet very well tested.
+without LAST, are not yet well tested.
.PP
Send comments, bug reports, gripes, and the like to Eric S. Raymond
<esr@thyrsus.com>.
.SH NOTE
-The --password option of previous versions has been removed -- it
+This program used to be called `popclient' (the name was changed
+because it supports IMAP now and may well support more remote-fetch
+protocols such as DMSP in the future).
+.PP
+The --password option of previous (popclient) versions has been removed -- it
encouraged people to expose passwords in scripts. Passwords
must now be specified either interactively or in your
-.I ~/.poprc
+.I ~/.fetchrc
file. The short-form -p option now specifies the protocol to use.
+.PP
+The reason the password isn't stored encrypted is because this doesn't
+actually add protection. Anyone who's acquired permissions to read your
+fetchrc file will be able to run
+.I fetchmail
+as you anyway -- and if it's
+your password they're after, they'd be able to use the necessary decoder from
+.I fetchmail
+itself to get it. All encryption would do in this context is give a
+false sense of security to people who don't think very hard.
.SH SEE ALSO
-mail(1), binmail(1), sendmail(8), popd(8),
+mail(1), binmail(1), sendmail(8), popd(8), imapd(8)
RFC 937, RFC 1081, RFC 1082, RFC 1225, RFC 1460, RFC 1725.