* @regs: The mapped hardware registers.
* @variant: Variant information for this hardware.
* @enabled: A bitmask of enabled hardware windows.
+ * @output_on: Flag if the physical output is enabled.
* @pdata: The platform configuration data passed with the device.
* @windows: The hardware windows that have been claimed.
* @irq_no: IRQ line number
struct s3c_fb_variant variant;
unsigned char enabled;
+ bool output_on;
struct s3c_fb_platdata *pdata;
struct s3c_fb_win *windows[S3C_FB_MAX_WIN];
}
}
+/**
+ * s3c_fb_enable() - Set the state of the main LCD output
+ * @sfb: The main framebuffer state.
+ * @enable: The state to set.
+ */
+static void s3c_fb_enable(struct s3c_fb *sfb, int enable)
+{
+ u32 vidcon0 = readl(sfb->regs + VIDCON0);
+
+ if (enable && !sfb->output_on)
+ pm_runtime_get_sync(sfb->dev);
+
+ if (enable) {
+ vidcon0 |= VIDCON0_ENVID | VIDCON0_ENVID_F;
+ } else {
+ /* see the note in the framebuffer datasheet about
+ * why you cannot take both of these bits down at the
+ * same time. */
+
+ if (vidcon0 & VIDCON0_ENVID) {
+ vidcon0 |= VIDCON0_ENVID;
+ vidcon0 &= ~VIDCON0_ENVID_F;
+ }
+ }
+
+ writel(vidcon0, sfb->regs + VIDCON0);
+
+ if (!enable && sfb->output_on)
+ pm_runtime_put_sync(sfb->dev);
+
+ sfb->output_on = enable;
+}
+
/**
* s3c_fb_set_par() - framebuffer request to set new framebuffer state.
* @info: The framebuffer to change.
dev_dbg(sfb->dev, "setting framebuffer parameters\n");
+ pm_runtime_get_sync(sfb->dev);
+
shadow_protect_win(win, 1);
switch (var->bits_per_pixel) {
if (sfb->variant.is_2443)
data |= (1 << 5);
- data |= VIDCON0_ENVID | VIDCON0_ENVID_F;
writel(data, regs + VIDCON0);
+ s3c_fb_enable(sfb, 1);
+
data = VIDTCON0_VBPD(var->upper_margin - 1) |
VIDTCON0_VFPD(var->lower_margin - 1) |
VIDTCON0_VSPW(var->vsync_len - 1);
}
data = WINCONx_ENWIN;
+ sfb->enabled |= (1 << win->index);
/* note, since we have to round up the bits-per-pixel, we end up
* relying on the bitfield information for r/g/b/a to work out
} else if (var->transp.length == 1)
data |= WINCON1_BPPMODE_25BPP_A1888
| WINCON1_BLD_PIX;
- else if (var->transp.length == 4)
+ else if ((var->transp.length == 4) ||
+ (var->transp.length == 8))
data |= WINCON1_BPPMODE_28BPP_A4888
| WINCON1_BLD_PIX | WINCON1_ALPHA_SEL;
else
shadow_protect_win(win, 0);
+ pm_runtime_put_sync(sfb->dev);
+
return 0;
}
dev_dbg(sfb->dev, "%s: win %d: %d => rgb=%d/%d/%d\n",
__func__, win->index, regno, red, green, blue);
+ pm_runtime_get_sync(sfb->dev);
+
switch (info->fix.visual) {
case FB_VISUAL_TRUECOLOR:
/* true-colour, use pseudo-palette */
break;
default:
+ pm_runtime_put_sync(sfb->dev);
return 1; /* unknown type */
}
+ pm_runtime_put_sync(sfb->dev);
return 0;
}
-/**
- * s3c_fb_enable() - Set the state of the main LCD output
- * @sfb: The main framebuffer state.
- * @enable: The state to set.
- */
-static void s3c_fb_enable(struct s3c_fb *sfb, int enable)
-{
- u32 vidcon0 = readl(sfb->regs + VIDCON0);
-
- if (enable)
- vidcon0 |= VIDCON0_ENVID | VIDCON0_ENVID_F;
- else {
- /* see the note in the framebuffer datasheet about
- * why you cannot take both of these bits down at the
- * same time. */
-
- if (!(vidcon0 & VIDCON0_ENVID))
- return;
-
- vidcon0 |= VIDCON0_ENVID;
- vidcon0 &= ~VIDCON0_ENVID_F;
- }
-
- writel(vidcon0, sfb->regs + VIDCON0);
-}
-
/**
* s3c_fb_blank() - blank or unblank the given window
* @blank_mode: The blank state from FB_BLANK_*
dev_dbg(sfb->dev, "blank mode %d\n", blank_mode);
+ pm_runtime_get_sync(sfb->dev);
+
wincon = readl(sfb->regs + sfb->variant.wincon + (index * 4));
switch (blank_mode) {
case FB_BLANK_NORMAL:
/* disable the DMA and display 0x0 (black) */
+ shadow_protect_win(win, 1);
writel(WINxMAP_MAP | WINxMAP_MAP_COLOUR(0x0),
sfb->regs + sfb->variant.winmap + (index * 4));
+ shadow_protect_win(win, 0);
break;
case FB_BLANK_UNBLANK:
+ shadow_protect_win(win, 1);
writel(0x0, sfb->regs + sfb->variant.winmap + (index * 4));
+ shadow_protect_win(win, 0);
wincon |= WINCONx_ENWIN;
sfb->enabled |= (1 << index);
break;
case FB_BLANK_VSYNC_SUSPEND:
case FB_BLANK_HSYNC_SUSPEND:
default:
+ pm_runtime_put_sync(sfb->dev);
return 1;
}
+ shadow_protect_win(win, 1);
writel(wincon, sfb->regs + sfb->variant.wincon + (index * 4));
+ shadow_protect_win(win, 0);
/* Check the enabled state to see if we need to be running the
* main LCD interface, as if there are no active windows then
/* we're stuck with this until we can do something about overriding
* the power control using the blanking event for a single fb.
*/
- if (index == sfb->pdata->default_win)
+ if (index == sfb->pdata->default_win) {
+ shadow_protect_win(win, 1);
s3c_fb_enable(sfb, blank_mode != FB_BLANK_POWERDOWN ? 1 : 0);
+ shadow_protect_win(win, 0);
+ }
+
+ pm_runtime_put_sync(sfb->dev);
return 0;
}
void __iomem *buf = sfb->regs + win->index * 8;
unsigned int start_boff, end_boff;
+ pm_runtime_get_sync(sfb->dev);
+
/* Offset in bytes to the start of the displayed area */
start_boff = var->yoffset * info->fix.line_length;
/* X offset depends on the current bpp */
break;
default:
dev_err(sfb->dev, "invalid bpp\n");
+ pm_runtime_put_sync(sfb->dev);
return -EINVAL;
}
}
shadow_protect_win(win, 0);
+ pm_runtime_put_sync(sfb->dev);
return 0;
}
if (crtc != 0)
return -ENODEV;
+ pm_runtime_get_sync(sfb->dev);
+
count = sfb->vsync_info.count;
s3c_fb_enable_irq(sfb);
ret = wait_event_interruptible_timeout(sfb->vsync_info.wait,
count != sfb->vsync_info.count,
msecs_to_jiffies(VSYNC_TIMEOUT_MSEC));
+
+ pm_runtime_put_sync(sfb->dev);
+
if (ret == 0)
return -ETIMEDOUT;
return ret;
}
-static int s3c_fb_open(struct fb_info *info, int user)
-{
- struct s3c_fb_win *win = info->par;
- struct s3c_fb *sfb = win->parent;
-
- pm_runtime_get_sync(sfb->dev);
-
- return 0;
-}
-
-static int s3c_fb_release(struct fb_info *info, int user)
-{
- struct s3c_fb_win *win = info->par;
- struct s3c_fb *sfb = win->parent;
-
- pm_runtime_put_sync(sfb->dev);
-
- return 0;
-}
-
static struct fb_ops s3c_fb_ops = {
.owner = THIS_MODULE,
- .fb_open = s3c_fb_open,
- .fb_release = s3c_fb_release,
.fb_check_var = s3c_fb_check_var,
.fb_set_par = s3c_fb_set_par,
.fb_blank = s3c_fb_blank,
dev_err(dev, "failed to create window %d\n", win);
for (; win >= 0; win--)
s3c_fb_release_win(sfb, sfb->windows[win]);
- goto err_irq;
+ goto err_pm_runtime;
}
}
return 0;
-err_irq:
+err_pm_runtime:
+ pm_runtime_put_sync(sfb->dev);
free_irq(sfb->irq_no, sfb);
err_ioremap:
release_mem_region(sfb->regs_res->start, resource_size(sfb->regs_res));
err_lcd_clk:
+ pm_runtime_disable(sfb->dev);
+
if (!sfb->variant.has_clksel) {
clk_disable(sfb->lcd_clk);
clk_put(sfb->lcd_clk);
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int s3c_fb_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
for (win_no = 0; win_no < sfb->variant.nr_windows - 1; win_no++) {
void __iomem *regs = sfb->regs + sfb->variant.keycon;
+ win = sfb->windows[win_no];
+ if (!win)
+ continue;
+ shadow_protect_win(win, 1);
regs += (win_no * 8);
writel(0xffffff, regs + WKEYCON0);
writel(0xffffff, regs + WKEYCON1);
+ shadow_protect_win(win, 0);
}
/* restore framebuffers */
return 0;
}
+#endif
+#ifdef CONFIG_PM_RUNTIME
static int s3c_fb_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct s3c_fb *sfb = platform_get_drvdata(pdev);
- struct s3c_fb_win *win;
- int win_no;
-
- for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) {
- win = sfb->windows[win_no];
- if (!win)
- continue;
-
- /* use the blank function to push into power-down */
- s3c_fb_blank(FB_BLANK_POWERDOWN, win->fbinfo);
- }
if (!sfb->variant.has_clksel)
clk_disable(sfb->lcd_clk);
clk_disable(sfb->bus_clk);
+
return 0;
}
struct platform_device *pdev = to_platform_device(dev);
struct s3c_fb *sfb = platform_get_drvdata(pdev);
struct s3c_fb_platdata *pd = sfb->pdata;
- struct s3c_fb_win *win;
- int win_no;
clk_enable(sfb->bus_clk);
pd->setup_gpio();
writel(pd->vidcon1, sfb->regs + VIDCON1);
- /* zero all windows before we do anything */
- for (win_no = 0; win_no < sfb->variant.nr_windows; win_no++)
- s3c_fb_clear_win(sfb, win_no);
-
- for (win_no = 0; win_no < sfb->variant.nr_windows - 1; win_no++) {
- void __iomem *regs = sfb->regs + sfb->variant.keycon;
-
- regs += (win_no * 8);
- writel(0xffffff, regs + WKEYCON0);
- writel(0xffffff, regs + WKEYCON1);
- }
-
- /* restore framebuffers */
- for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
- win = sfb->windows[win_no];
- if (!win)
- continue;
-
- dev_dbg(&pdev->dev, "resuming window %d\n", win_no);
- s3c_fb_set_par(win->fbinfo);
- }
-
return 0;
}
-
-#else
-#define s3c_fb_suspend NULL
-#define s3c_fb_resume NULL
-#define s3c_fb_runtime_suspend NULL
-#define s3c_fb_runtime_resume NULL
#endif
-
#define VALID_BPP124 (VALID_BPP(1) | VALID_BPP(2) | VALID_BPP(4))
#define VALID_BPP1248 (VALID_BPP124 | VALID_BPP(8))
MODULE_DEVICE_TABLE(platform, s3c_fb_driver_ids);
static const struct dev_pm_ops s3cfb_pm_ops = {
- .suspend = s3c_fb_suspend,
- .resume = s3c_fb_resume,
- .runtime_suspend = s3c_fb_runtime_suspend,
- .runtime_resume = s3c_fb_runtime_resume,
+ SET_SYSTEM_SLEEP_PM_OPS(s3c_fb_suspend, s3c_fb_resume)
+ SET_RUNTIME_PM_OPS(s3c_fb_runtime_suspend, s3c_fb_runtime_resume,
+ NULL)
};
static struct platform_driver s3c_fb_driver = {
},
};
-static int __init s3c_fb_init(void)
-{
- return platform_driver_register(&s3c_fb_driver);
-}
-
-static void __exit s3c_fb_cleanup(void)
-{
- platform_driver_unregister(&s3c_fb_driver);
-}
-
-module_init(s3c_fb_init);
-module_exit(s3c_fb_cleanup);
+module_platform_driver(s3c_fb_driver);
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_DESCRIPTION("Samsung S3C SoC Framebuffer driver");
projects / ~andy / linux / blobdiff