#include "gadget.h"
#include "io.h"
-#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-
-void dwc3_map_buffer_to_dma(struct dwc3_request *req)
+/**
+ * dwc3_gadget_set_test_mode - Enables USB2 Test Modes
+ * @dwc: pointer to our context structure
+ * @mode: the mode to set (J, K SE0 NAK, Force Enable)
+ *
+ * Caller should take care of locking. This function will
+ * return 0 on success or -EINVAL if wrong Test Selector
+ * is passed
+ */
+int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
{
- struct dwc3 *dwc = req->dep->dwc;
+ u32 reg;
- if (req->request.length == 0) {
- /* req->request.dma = dwc->setup_buf_addr; */
- return;
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg &= ~DWC3_DCTL_TSTCTRL_MASK;
+
+ switch (mode) {
+ case TEST_J:
+ case TEST_K:
+ case TEST_SE0_NAK:
+ case TEST_PACKET:
+ case TEST_FORCE_EN:
+ reg |= mode << 1;
+ break;
+ default:
+ return -EINVAL;
}
- if (req->request.num_sgs) {
- int mapped;
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
- mapped = dma_map_sg(dwc->dev, req->request.sg,
- req->request.num_sgs,
- req->direction ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- if (mapped < 0) {
- dev_err(dwc->dev, "failed to map SGs\n");
- return;
- }
+ return 0;
+}
- req->request.num_mapped_sgs = mapped;
- return;
- }
+/**
+ * dwc3_gadget_set_link_state - Sets USB Link to a particular State
+ * @dwc: pointer to our context structure
+ * @state: the state to put link into
+ *
+ * Caller should take care of locking. This function will
+ * return 0 on success or -ETIMEDOUT.
+ */
+int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
+{
+ int retries = 10000;
+ u32 reg;
+
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
- if (req->request.dma == DMA_ADDR_INVALID) {
- req->request.dma = dma_map_single(dwc->dev, req->request.buf,
- req->request.length, req->direction
- ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
- req->mapped = true;
+ /* set requested state */
+ reg |= DWC3_DCTL_ULSTCHNGREQ(state);
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+ /* wait for a change in DSTS */
+ while (--retries) {
+ reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+
+ if (DWC3_DSTS_USBLNKST(reg) == state)
+ return 0;
+
+ udelay(5);
}
+
+ dev_vdbg(dwc->dev, "link state change request timed out\n");
+
+ return -ETIMEDOUT;
}
-void dwc3_unmap_buffer_from_dma(struct dwc3_request *req)
+/**
+ * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
+ * @dwc: pointer to our context structure
+ *
+ * This function will a best effort FIFO allocation in order
+ * to improve FIFO usage and throughput, while still allowing
+ * us to enable as many endpoints as possible.
+ *
+ * Keep in mind that this operation will be highly dependent
+ * on the configured size for RAM1 - which contains TxFifo -,
+ * the amount of endpoints enabled on coreConsultant tool, and
+ * the width of the Master Bus.
+ *
+ * In the ideal world, we would always be able to satisfy the
+ * following equation:
+ *
+ * ((512 + 2 * MDWIDTH-Bytes) + (Number of IN Endpoints - 1) * \
+ * (3 * (1024 + MDWIDTH-Bytes) + MDWIDTH-Bytes)) / MDWIDTH-Bytes
+ *
+ * Unfortunately, due to many variables that's not always the case.
+ */
+int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
{
- struct dwc3 *dwc = req->dep->dwc;
+ int last_fifo_depth = 0;
+ int ram1_depth;
+ int fifo_size;
+ int mdwidth;
+ int num;
- if (req->request.length == 0) {
- req->request.dma = DMA_ADDR_INVALID;
- return;
- }
+ if (!dwc->needs_fifo_resize)
+ return 0;
- if (req->request.num_mapped_sgs) {
- req->request.dma = DMA_ADDR_INVALID;
- dma_unmap_sg(dwc->dev, req->request.sg,
- req->request.num_mapped_sgs,
- req->direction ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
+ ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
+ mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
- req->request.num_mapped_sgs = 0;
- return;
- }
+ /* MDWIDTH is represented in bits, we need it in bytes */
+ mdwidth >>= 3;
+
+ /*
+ * FIXME For now we will only allocate 1 wMaxPacketSize space
+ * for each enabled endpoint, later patches will come to
+ * improve this algorithm so that we better use the internal
+ * FIFO space
+ */
+ for (num = 0; num < DWC3_ENDPOINTS_NUM; num++) {
+ struct dwc3_ep *dep = dwc->eps[num];
+ int fifo_number = dep->number >> 1;
+ int mult = 1;
+ int tmp;
+
+ if (!(dep->number & 1))
+ continue;
+
+ if (!(dep->flags & DWC3_EP_ENABLED))
+ continue;
+
+ if (usb_endpoint_xfer_bulk(dep->desc)
+ || usb_endpoint_xfer_isoc(dep->desc))
+ mult = 3;
+
+ /*
+ * REVISIT: the following assumes we will always have enough
+ * space available on the FIFO RAM for all possible use cases.
+ * Make sure that's true somehow and change FIFO allocation
+ * accordingly.
+ *
+ * If we have Bulk or Isochronous endpoints, we want
+ * them to be able to be very, very fast. So we're giving
+ * those endpoints a fifo_size which is enough for 3 full
+ * packets
+ */
+ tmp = mult * (dep->endpoint.maxpacket + mdwidth);
+ tmp += mdwidth;
+
+ fifo_size = DIV_ROUND_UP(tmp, mdwidth);
+
+ fifo_size |= (last_fifo_depth << 16);
+
+ dev_vdbg(dwc->dev, "%s: Fifo Addr %04x Size %d\n",
+ dep->name, last_fifo_depth, fifo_size & 0xffff);
+
+ dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(fifo_number),
+ fifo_size);
- if (req->mapped) {
- dma_unmap_single(dwc->dev, req->request.dma,
- req->request.length, req->direction
- ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
- req->mapped = 0;
- req->request.dma = DMA_ADDR_INVALID;
+ last_fifo_depth += (fifo_size & 0xffff);
}
+
+ return 0;
}
void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
if (req->request.status == -EINPROGRESS)
req->request.status = status;
- dwc3_unmap_buffer_from_dma(req);
+ usb_gadget_unmap_request(&dwc->gadget, &req->request,
+ req->direction);
dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
req, dep->name, req->request.actual,
req->request.length, status);
spin_unlock(&dwc->lock);
- req->request.complete(&req->dep->endpoint, &req->request);
+ req->request.complete(&dep->endpoint, &req->request);
spin_lock(&dwc->lock);
}
}
static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
- struct dwc3_trb_hw *trb)
+ struct dwc3_trb *trb)
{
u32 offset = (char *) trb - (char *) dep->trb_pool;
return ret;
if (!(dep->flags & DWC3_EP_ENABLED)) {
- struct dwc3_trb_hw *trb_st_hw;
- struct dwc3_trb_hw *trb_link_hw;
- struct dwc3_trb trb_link;
+ struct dwc3_trb *trb_st_hw;
+ struct dwc3_trb *trb_link;
ret = dwc3_gadget_set_xfer_resource(dwc, dep);
if (ret)
memset(&trb_link, 0, sizeof(trb_link));
- /* Link TRB for ISOC. The HWO but is never reset */
+ /* Link TRB for ISOC. The HWO bit is never reset */
trb_st_hw = &dep->trb_pool[0];
- trb_link.bplh = dwc3_trb_dma_offset(dep, trb_st_hw);
- trb_link.trbctl = DWC3_TRBCTL_LINK_TRB;
- trb_link.hwo = true;
+ trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
- trb_link_hw = &dep->trb_pool[DWC3_TRB_NUM - 1];
- dwc3_trb_to_hw(&trb_link, trb_link_hw);
+ trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
+ trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
+ trb_link->ctrl |= DWC3_TRBCTL_LINK_TRB;
+ trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
}
return 0;
dep->stream_capable = false;
dep->desc = NULL;
+ dep->endpoint.desc = NULL;
dep->comp_desc = NULL;
dep->type = 0;
dep->flags = 0;
switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_CONTROL:
- strncat(dep->name, "-control", sizeof(dep->name));
+ strlcat(dep->name, "-control", sizeof(dep->name));
break;
case USB_ENDPOINT_XFER_ISOC:
- strncat(dep->name, "-isoc", sizeof(dep->name));
+ strlcat(dep->name, "-isoc", sizeof(dep->name));
break;
case USB_ENDPOINT_XFER_BULK:
- strncat(dep->name, "-bulk", sizeof(dep->name));
+ strlcat(dep->name, "-bulk", sizeof(dep->name));
break;
case USB_ENDPOINT_XFER_INT:
- strncat(dep->name, "-int", sizeof(dep->name));
+ strlcat(dep->name, "-int", sizeof(dep->name));
break;
default:
dev_err(dwc->dev, "invalid endpoint transfer type\n");
req->epnum = dep->number;
req->dep = dep;
- req->request.dma = DMA_ADDR_INVALID;
return &req->request;
}
unsigned length, unsigned last, unsigned chain)
{
struct dwc3 *dwc = dep->dwc;
- struct dwc3_trb_hw *trb_hw;
- struct dwc3_trb trb;
+ struct dwc3_trb *trb;
unsigned int cur_slot;
length, last ? " last" : "",
chain ? " chain" : "");
- trb_hw = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
+ trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
cur_slot = dep->free_slot;
dep->free_slot++;
usb_endpoint_xfer_isoc(dep->desc))
return;
- memset(&trb, 0, sizeof(trb));
if (!req->trb) {
dwc3_gadget_move_request_queued(req);
- req->trb = trb_hw;
- req->trb_dma = dwc3_trb_dma_offset(dep, trb_hw);
+ req->trb = trb;
+ req->trb_dma = dwc3_trb_dma_offset(dep, trb);
}
- if (usb_endpoint_xfer_isoc(dep->desc)) {
- trb.isp_imi = true;
- trb.csp = true;
- } else {
- trb.chn = chain;
- trb.lst = last;
- }
-
- if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable)
- trb.sid_sofn = req->request.stream_id;
+ trb->size = DWC3_TRB_SIZE_LENGTH(length);
+ trb->bpl = lower_32_bits(dma);
+ trb->bph = upper_32_bits(dma);
switch (usb_endpoint_type(dep->desc)) {
case USB_ENDPOINT_XFER_CONTROL:
- trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP;
+ trb->ctrl = DWC3_TRBCTL_CONTROL_SETUP;
break;
case USB_ENDPOINT_XFER_ISOC:
- trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
+ trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
/* IOC every DWC3_TRB_NUM / 4 so we can refill */
if (!(cur_slot % (DWC3_TRB_NUM / 4)))
- trb.ioc = last;
+ trb->ctrl |= DWC3_TRB_CTRL_IOC;
break;
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
- trb.trbctl = DWC3_TRBCTL_NORMAL;
+ trb->ctrl = DWC3_TRBCTL_NORMAL;
break;
default:
/*
BUG();
}
- trb.length = length;
- trb.bplh = dma;
- trb.hwo = true;
+ if (usb_endpoint_xfer_isoc(dep->desc)) {
+ trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
+ trb->ctrl |= DWC3_TRB_CTRL_CSP;
+ } else {
+ if (chain)
+ trb->ctrl |= DWC3_TRB_CTRL_CHN;
+
+ if (last)
+ trb->ctrl |= DWC3_TRB_CTRL_LST;
+ }
- dwc3_trb_to_hw(&trb, trb_hw);
+ if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable)
+ trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id);
+
+ trb->ctrl |= DWC3_TRB_CTRL_HWO;
}
/*
* @dep: endpoint for which requests are being prepared
* @starting: true if the endpoint is idle and no requests are queued.
*
- * The functions goes through the requests list and setups TRBs for the
- * transfers. The functions returns once there are not more TRBs available or
- * it run out of requests.
+ * The function goes through the requests list and sets up TRBs for the
+ * transfers. The function returns once there are no more TRBs available or
+ * it runs out of requests.
*/
static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
{
struct dwc3_request *req, *n;
u32 trbs_left;
+ u32 max;
unsigned int last_one = 0;
BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
/* the first request must not be queued */
trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
+ /* Can't wrap around on a non-isoc EP since there's no link TRB */
+ if (!usb_endpoint_xfer_isoc(dep->desc)) {
+ max = DWC3_TRB_NUM - (dep->free_slot & DWC3_TRB_MASK);
+ if (trbs_left > max)
+ trbs_left = max;
+ }
+
/*
- * if busy & slot are equal than it is either full or empty. If we are
- * starting to proceed requests then we are empty. Otherwise we ar
+ * If busy & slot are equal than it is either full or empty. If we are
+ * starting to process requests then we are empty. Otherwise we are
* full and don't do anything
*/
if (!trbs_left) {
* In case we start from scratch, we queue the ISOC requests
* starting from slot 1. This is done because we use ring
* buffer and have no LST bit to stop us. Instead, we place
- * IOC bit TRB_NUM/4. We try to avoid to having an interrupt
+ * IOC bit every TRB_NUM/4. We try to avoid having an interrupt
* after the first request so we start at slot 1 and have
* 7 requests proceed before we hit the first IOC.
* Other transfer types don't use the ring buffer and are
length = sg_dma_len(s);
dma = sg_dma_address(s);
- if (i == (request->num_mapped_sgs - 1)
- || sg_is_last(s)) {
+ if (i == (request->num_mapped_sgs - 1) ||
+ sg_is_last(s)) {
last_one = true;
chain = false;
}
dwc3_prepare_trbs(dep, start_new);
/*
- * req points to the first request where HWO changed
- * from 0 to 1
+ * req points to the first request where HWO changed from 0 to 1
*/
req = next_request(&dep->req_queued);
}
/*
* FIXME we need to iterate over the list of requests
* here and stop, unmap, free and del each of the linked
- * requests instead of we do now.
+ * requests instead of what we do now.
*/
- dwc3_unmap_buffer_from_dma(req);
+ usb_gadget_unmap_request(&dwc->gadget, &req->request,
+ req->direction);
list_del(&req->list);
return ret;
}
static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
{
+ struct dwc3 *dwc = dep->dwc;
+ int ret;
+
req->request.actual = 0;
req->request.status = -EINPROGRESS;
req->direction = dep->direction;
* particular token from the Host side.
*
* This will also avoid Host cancelling URBs due to too
- * many NACKs.
+ * many NAKs.
*/
- dwc3_map_buffer_to_dma(req);
+ ret = usb_gadget_map_request(&dwc->gadget, &req->request,
+ dep->direction);
+ if (ret)
+ return ret;
+
list_add_tail(&req->list, &dep->request_list);
/*
int start_trans;
start_trans = 1;
- if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- dep->flags & DWC3_EP_BUSY)
+ if (usb_endpoint_xfer_isoc(dep->desc) &&
+ (dep->flags & DWC3_EP_BUSY))
start_trans = 0;
- ret = __dwc3_gadget_kick_transfer(dep, 0, start_trans);
+ ret = __dwc3_gadget_kick_transfer(dep, 0, start_trans);
if (ret && ret != -EBUSY) {
struct dwc3 *dwc = dep->dwc;
static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
{
struct dwc3_ep *dep = to_dwc3_ep(ep);
+ struct dwc3 *dwc = dep->dwc;
+ unsigned long flags;
+ spin_lock_irqsave(&dwc->lock, flags);
dep->flags |= DWC3_EP_WEDGE;
+ spin_unlock_irqrestore(&dwc->lock, flags);
return dwc3_gadget_ep_set_halt(ep, 1);
}
goto out;
}
- reg = dwc3_readl(dwc->regs, DWC3_DCTL);
-
- /*
- * Switch link state to Recovery. In HS/FS/LS this means
- * RemoteWakeup Request
- */
- reg |= DWC3_DCTL_ULSTCHNG_RECOVERY;
- dwc3_writel(dwc->regs, DWC3_DCTL, reg);
-
- /* wait for at least 2000us */
- usleep_range(2000, 2500);
+ ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV);
+ if (ret < 0) {
+ dev_err(dwc->dev, "failed to put link in Recovery\n");
+ goto out;
+ }
/* write zeroes to Link Change Request */
reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
- /* pool until Link State change to ON */
+ /* poll until Link State changes to ON */
timeout = jiffies + msecs_to_jiffies(100);
- while (!(time_after(jiffies, timeout))) {
+ while (!time_after(jiffies, timeout)) {
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
/* in HS, means ON */
int is_selfpowered)
{
struct dwc3 *dwc = gadget_to_dwc(g);
+ unsigned long flags;
+ spin_lock_irqsave(&dwc->lock, flags);
dwc->is_selfpowered = !!is_selfpowered;
+ spin_unlock_irqrestore(&dwc->lock, flags);
return 0;
}
u32 timeout = 500;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
- if (is_on)
- reg |= DWC3_DCTL_RUN_STOP;
- else
+ if (is_on) {
+ reg &= ~DWC3_DCTL_TRGTULST_MASK;
+ reg |= (DWC3_DCTL_RUN_STOP
+ | DWC3_DCTL_TRGTULST_RX_DET);
+ } else {
reg &= ~DWC3_DCTL_RUN_STOP;
+ }
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
const struct dwc3_event_depevt *event, int status)
{
struct dwc3_request *req;
- struct dwc3_trb trb;
+ struct dwc3_trb *trb;
unsigned int count;
unsigned int s_pkt = 0;
return 1;
}
- dwc3_trb_to_nat(req->trb, &trb);
+ trb = req->trb;
- if (trb.hwo && status != -ESHUTDOWN)
+ if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
/*
* We continue despite the error. There is not much we
- * can do. If we don't clean in up we loop for ever. If
- * we skip the TRB than it gets overwritten reused after
- * a while since we use them in a ring buffer. a BUG()
- * would help. Lets hope that if this occures, someone
+ * can do. If we don't clean it up we loop forever. If
+ * we skip the TRB then it gets overwritten after a
+ * while since we use them in a ring buffer. A BUG()
+ * would help. Lets hope that if this occurs, someone
* fixes the root cause instead of looking away :)
*/
dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
dep->name, req->trb);
- count = trb.length;
+ count = trb->size & DWC3_TRB_SIZE_MASK;
if (dep->direction) {
if (count) {
dwc3_gadget_giveback(dep, req, status);
if (s_pkt)
break;
- if ((event->status & DEPEVT_STATUS_LST) && trb.lst)
+ if ((event->status & DEPEVT_STATUS_LST) &&
+ (trb->ctrl & DWC3_TRB_CTRL_LST))
break;
- if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc)
+ if ((event->status & DEPEVT_STATUS_IOC) &&
+ (trb->ctrl & DWC3_TRB_CTRL_IOC))
break;
} while (1);
- if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc)
+ if ((event->status & DEPEVT_STATUS_IOC) &&
+ (trb->ctrl & DWC3_TRB_CTRL_IOC))
return 0;
return 1;
}
if (event->status & DEPEVT_STATUS_BUSERR)
status = -ECONNRESET;
- clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
- if (clean_busy) {
+ clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
+ if (clean_busy)
dep->flags &= ~DWC3_EP_BUSY;
- dep->res_trans_idx = 0;
- }
/*
* WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround.
static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
{
- u32 uf;
+ u32 uf, mask;
if (list_empty(&dep->request_list)) {
dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
return;
}
- if (event->parameters) {
- u32 mask;
-
- mask = ~(dep->interval - 1);
- uf = event->parameters & mask;
- /* 4 micro frames in the future */
- uf += dep->interval * 4;
- } else {
- uf = 0;
- }
+ mask = ~(dep->interval - 1);
+ uf = event->parameters & mask;
+ /* 4 micro frames in the future */
+ uf += dep->interval * 4;
__dwc3_gadget_kick_transfer(dep, uf, 1);
}
struct dwc3_event_depevt mod_ev = *event;
/*
- * We were asked to remove one requests. It is possible that this
- * request and a few other were started together and have the same
+ * We were asked to remove one request. It is possible that this
+ * request and a few others were started together and have the same
* transfer index. Since we stopped the complete endpoint we don't
* know how many requests were already completed (and not yet)
* reported and how could be done (later). We purge them all until
mod_ev.status = DEPEVT_STATUS_LST;
dwc3_cleanup_done_reqs(dwc, dep, &mod_ev, -ESHUTDOWN);
dep->flags &= ~DWC3_EP_BUSY;
- /* pending requets are ignored and are queued on XferNotReady */
+ /* pending requests are ignored and are queued on XferNotReady */
}
static void dwc3_ep_cmd_compl(struct dwc3_ep *dep,
switch (event->endpoint_event) {
case DWC3_DEPEVT_XFERCOMPLETE:
+ dep->res_trans_idx = 0;
+
if (usb_endpoint_xfer_isoc(dep->desc)) {
dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
dep->name);
int ret;
dev_vdbg(dwc->dev, "%s: reason %s\n",
- dep->name, event->status
+ dep->name, event->status &
+ DEPEVT_STATUS_TRANSFER_ACTIVE
? "Transfer Active"
: "Transfer Not Active");
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg &= ~DWC3_DCTL_TSTCTRL_MASK;
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+ dwc->test_mode = false;
dwc3_stop_active_transfers(dwc);
dwc3_clear_stall_all_ep(dwc);
while (left > 0) {
union dwc3_event event;
- memcpy(&event.raw, (evt->buf + evt->lpos), sizeof(event.raw));
+ event.raw = *(u32 *) (evt->buf + evt->lpos);
+
dwc3_process_event_entry(dwc, &event);
/*
* XXX we wrap around correctly to the next entry as almost all
/**
* dwc3_gadget_init - Initializes gadget related registers
- * @dwc: Pointer to out controller context structure
+ * @dwc: pointer to our controller context structure
*
* Returns 0 on success otherwise negative errno.
*/
goto err1;
}
- dwc->setup_buf = dma_alloc_coherent(dwc->dev,
- sizeof(*dwc->setup_buf) * 2,
- &dwc->setup_buf_addr, GFP_KERNEL);
+ dwc->setup_buf = kzalloc(sizeof(*dwc->setup_buf) * 2,
+ GFP_KERNEL);
if (!dwc->setup_buf) {
dev_err(dwc->dev, "failed to allocate setup buffer\n");
ret = -ENOMEM;
dwc->ep0_bounce_addr);
err3:
- dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
- dwc->setup_buf, dwc->setup_buf_addr);
+ kfree(dwc->setup_buf);
err2:
dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
dwc->ep0_bounce_addr);
- dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
- dwc->setup_buf, dwc->setup_buf_addr);
+ kfree(dwc->setup_buf);
dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
dwc->ep0_trb, dwc->ep0_trb_addr);
projects / ~andy / linux / blobdiff