}
}
- if ( (info->port.flags & ASYNC_CTS_FLOW) &&
+ if (tty_port_cts_enabled(&info->port) &&
(status & MISCSTATUS_CTS_LATCHED) ) {
if (info->port.tty->hw_stopped) {
if (status & MISCSTATUS_CTS) {
usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS +
TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC );
usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
-
+
/* Disable DMAEN (Port 7, Bit 14) */
/* This disconnects the DMA request signal from the ISA bus */
/* on the ISA adapter. This has no effect for the PCI adapter */
usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
-
+
/* Disable INTEN (Port 6, Bit12) */
/* This disconnects the IRQ request signal to the ISA bus */
/* on the ISA adapter. This has no effect for the PCI adapter */
usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
-
- if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+
+ if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
usc_set_serial_signals(info);
}
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
mgsl_release_resources(info);
usc_EnableInterrupts(info, IO_PIN);
usc_get_serial_signals(info);
- if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
+ if (info->netcount || info->port.tty->termios.c_cflag & CREAD)
usc_start_receiver(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
unsigned cflag;
int bits_per_char;
- if (!info->port.tty || !info->port.tty->termios)
+ if (!info->port.tty)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_change_params(%s)\n",
__FILE__,__LINE__, info->device_name );
- cflag = info->port.tty->termios->c_cflag;
+ cflag = info->port.tty->termios.c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
if (I_IXOFF(tty))
mgsl_send_xchar(tty, STOP_CHAR(tty));
-
- if (tty->termios->c_cflag & CRTSCTS) {
+
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->irq_spinlock,flags);
info->serial_signals &= ~SerialSignal_RTS;
usc_set_serial_signals(info);
else
mgsl_send_xchar(tty, START_CHAR(tty));
}
-
- if (tty->termios->c_cflag & CRTSCTS) {
+
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->irq_spinlock,flags);
info->serial_signals |= SerialSignal_RTS;
usc_set_serial_signals(info);
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
- !(tty->termios->c_cflag & CBAUD)) {
+ !(tty->termios.c_cflag & CBAUD)) {
info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
spin_lock_irqsave(&info->irq_spinlock,flags);
usc_set_serial_signals(info);
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios->c_cflag & CBAUD) {
+ tty->termios.c_cflag & CBAUD) {
info->serial_signals |= SerialSignal_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->serial_signals |= SerialSignal_RTS;
}
/* Handle turning off CRTSCTS */
if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
mgsl_start(tty);
}
return 0;
}
- if (tty->termios->c_cflag & CLOCAL)
+ if (tty->termios.c_cflag & CLOCAL)
do_clocal = true;
/* Wait for carrier detect and the line to become
port->blocked_open++;
while (1) {
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
set_current_state(TASK_INTERRUPTIBLE);
printk("%s(%d):block_til_ready blocking on %s count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
} /* end of block_til_ready() */
+static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct mgsl_struct *info;
+ int line = tty->index;
+
+ /* verify range of specified line number */
+ if (line >= mgsl_device_count) {
+ printk("%s(%d):mgsl_open with invalid line #%d.\n",
+ __FILE__, __LINE__, line);
+ return -ENODEV;
+ }
+
+ /* find the info structure for the specified line */
+ info = mgsl_device_list;
+ while (info && info->line != line)
+ info = info->next_device;
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
+ return -ENODEV;
+ tty->driver_data = info;
+
+ return tty_port_install(&info->port, driver, tty);
+}
+
/* mgsl_open()
*
* Called when a port is opened. Init and enable port.
*/
static int mgsl_open(struct tty_struct *tty, struct file * filp)
{
- struct mgsl_struct *info;
- int retval, line;
+ struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
+ int retval;
- /* verify range of specified line number */
- line = tty->index;
- if (line >= mgsl_device_count) {
- printk("%s(%d):mgsl_open with invalid line #%d.\n",
- __FILE__,__LINE__,line);
- return -ENODEV;
- }
-
- /* find the info structure for the specified line */
- info = mgsl_device_list;
- while(info && info->line != line)
- info = info->next_device;
- if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
- return -ENODEV;
-
- tty->driver_data = info;
info->port.tty = tty;
if (debug_level >= DEBUG_LEVEL_INFO)
} /* end of mgsl_allocate_device()*/
static const struct tty_operations mgsl_ops = {
+ .install = mgsl_install,
.open = mgsl_open,
.close = mgsl_close,
.write = mgsl_write,