{
Dot11d_Init(ieee);
ieee->bGlobalDomain = false;
- //acturally 8225 & 8256 rf chip only support B,G,24N mode
+ //actually 8225 & 8256 rf chips only support B,G,24N mode
if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256))
{
min_chan = 1;
}
-/* The protype of rx_isr has changed since one verion of Linux Kernel */
+/* The prototype of rx_isr has changed since one version of Linux Kernel */
static void rtl8192_rx_isr(struct urb *urb)
{
struct sk_buff *skb = (struct sk_buff *) urb->context;
if(tcb_desc->queue_index != TXCMD_QUEUE) {
if(tx_urb->status == 0) {
dev->trans_start = jiffies;
- // As act as station mode, destion shall be unicast address.
+ // Act as station mode, destination shall be unicast address.
//priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom);
//priv->ieee80211->stats.tx_packets++;
priv->stats.txoktotal++;
else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index])!= 0)&&\
(!(priv->ieee80211->queue_stop))) {
// Tx Driver Aggregation process
- /* The driver will aggregation the packets according to the following stets
+ /* The driver will aggregation the packets according to the following stats
* 1. check whether there's tx irq available, for it's a completion return
* function, it should contain enough tx irq;
- * 2. check pakcet type;
+ * 2. check packet type;
* 3. initialize sendlist, check whether the to-be send packet no greater than 1
- * 4. aggregation the packets, and fill firmware info and tx desc to it, etc.
- * 5. check whehter the packet could be sent, otherwise just insert to wait head
+ * 4. aggregates the packets, and fill firmware info and tx desc into it, etc.
+ * 5. check whether the packet could be sent, otherwise just insert into wait head
* */
skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]);
if(!check_nic_enough_desc(dev, queue_index)) {
return 0;
}
-/* handle manage frame frame beacon and probe response */
+/* handle and manage frame from beacon and probe response */
static int rtl8192_handle_beacon(struct net_device * dev,
struct ieee80211_beacon * beacon,
struct ieee80211_network * network)
void rtl8192_refresh_supportrate(struct r8192_priv* priv)
{
struct ieee80211_device* ieee = priv->ieee80211;
- //we donot consider set support rate for ABG mode, only HT MCS rate is set here.
+ //we do not consider set support rate for ABG mode, only HT MCS rate is set here.
if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G)
{
memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16);
priv->TransmitConfig =
// TCR_DurProcMode | //for RTL8185B, duration setting by HW
//? TCR_DISReqQsize |
- (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reservied.
+ (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reserved.
(priv->ShortRetryLimit<<TCR_SRL_OFFSET)| // Short retry limit
(priv->LongRetryLimit<<TCR_LRL_OFFSET) | // Long retry limit
- (false ? TCR_SAT: 0); // FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them
+ (false ? TCR_SAT: 0); // FALSE: HW provides PLCP length and LENGEXT, TRUE: SW provides them
#ifdef TO_DO_LIST
if(Adapter->bInHctTest)
pHalData->ReceiveConfig = pHalData->CSMethod |
{ // User disable RF via registry.
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
- // Those action will be discard in MgntActSet_RF_State because off the same state
+ // Those actions will be discard in MgntActSet_RF_State because of the same state
for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
}
if(pHalData->eRFPowerState == eRfOff)
{
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
- // Those action will be discard in MgntActSet_RF_State because off the same state
+ // Those actions will be discard in MgntActSet_RF_State because of the same state
for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
}
//unsigned long flags;
//
- // Decide Stuch threshold according to current power save mode
+ // Decide such threshold according to current power save mode
//
// RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n");
// Driver should not check RX stuck in IBSS mode because it is required to
// set Check BSSID in order to send beacon, however, if check BSSID is
- // set, STA cannot hear any packet a all. Emily, 2008.04.12
+ // set, STA cannot hear any packet at all. Emily, 2008.04.12
RxResetType = RxCheckStuck(dev);
}
if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL)
up(&priv->wx_sem);
RT_TRACE(COMP_RESET,"%s():<==========down process is finished\n",__FUNCTION__);
//rtl8192_irq_disable(dev);
- RT_TRACE(COMP_RESET,"%s():===========>start to up the driver\n",__FUNCTION__);
+ RT_TRACE(COMP_RESET,"%s():===========>start up the driver\n",__FUNCTION__);
reset_status = _rtl8192_up(dev);
RT_TRACE(COMP_RESET,"%s():<===========up process is finished\n",__FUNCTION__);
void watch_dog_timer_callback(unsigned long data)
{
struct r8192_priv *priv = ieee80211_priv((struct net_device *) data);
- //printk("===============>watch_dog timer\n");
+ //printk("===============>watch_dog timer\n");
queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0);
mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
}
init_status = rtl8192_adapter_start(dev);
if(!init_status)
{
- RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization is failed!\n", __FUNCTION__);
+ RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization failed!\n", __FUNCTION__);
priv->up=priv->ieee80211->ieee_up = 0;
return -EAGAIN;
}
skb_queue_purge(&priv->ieee80211->skb_drv_aggQ [i]);
}
- //as cancel_delayed_work will del work->timer, so if work is not definedas struct delayed_work, it will corrupt
+ //as cancel_delayed_work will del work->timer, so if work is not defined as struct delayed_work, it will corrupt
// flush_scheduled_work();
rtl8192_cancel_deferred_work(priv);
deinit_hal_dm(dev);
/**
* Function: UpdateRxPktTimeStamp
- * Overview: Recored down the TSF time stamp when receiving a packet
+ * Overview: Record the TSF time stamp when receiving a packet
*
* Input:
* PADAPTER Adapter
}
-/* 2008/01/22 MH We can not delcare RSSI/EVM total value of sliding window to
+/* 2008/01/22 MH We can not declare RSSI/EVM total value of sliding window to
be a local static. Otherwise, it may increase when we return from S3/S4. The
- value will be kept in memory or disk. We must delcare the value in adapter
- and it will be reinitialized when return from S3/S4. */
+ value will be kept in memory or disk. Declare the value in the adaptor
+ and it will be reinitialized when returned from S3/S4. */
void rtl8192_process_phyinfo(struct r8192_priv * priv,u8* buffer, struct ieee80211_rx_stats * pprevious_stats, struct ieee80211_rx_stats * pcurrent_stats)
{
bool bcheck = false;
tmp_rxevm = pofdm_buf->rxevm_X[i];
rx_evmX = (char)(tmp_rxevm);
- // Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
- // fill most significant bit to "zero" when doing shifting operation which may change a negative
+ // Do not use shift operation like "rx_evmX >>= 1" because the compiler of free build environment
+ // will set the most significant bit to "zero" when doing shifting operation which may change a negative
// value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore.
rx_evmX /= 2; //dbm
type = WLAN_FC_GET_TYPE(fc);
praddr = hdr->addr1;
- /* Check if the received packet is acceptabe. */
+ /* Check if the received packet is acceptable. */
bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) &&
(eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3))
&& (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
/**
* Function: UpdateReceivedRateHistogramStatistics
-* Overview: Recored down the received data rate
+* Overview: Record the received data rate
*
* Input:
* struct net_device *dev
}
#ifdef USB_RX_AGGREGATION_SUPPORT
- /* for the rx aggregated sub frame, the redundant space truelly contained in the packet */
+ /* for the rx aggregated sub frame, the redundant space truly contained in the packet */
if(bIsRxAggrSubframe) {
skb_pull(skb, 8);
}
PacketShiftBytes = GetRxPacketShiftBytes819xUsb(&stats, false);
}
#endif
- /* Process the MPDU recevied */
+ /* Process the MPDU received */
skb_trim(skb, skb->len - 4/*sCrcLng*/);
rx_pkt_len = skb->len;
if(PacketLength > agg_skb->len) {
break;
}
- /* Process the MPDU recevied */
+ /* Process the MPDU received */
skb = dev_alloc_skb(PacketLength);
memcpy(skb_put(skb,PacketLength),agg_skb->data, PacketLength);
skb_trim(skb, skb->len - 4/*sCrcLng*/);
projects / ~andy / linux / blobdiff