* run time. We do not support message more than one segment now.
*/
RT_STATUS cmpk_message_handle_tx(
- struct net_device *dev,
+ struct r8192_priv *priv,
u8* code_virtual_address,
u32 packettype,
u32 buffer_len)
{
-
RT_STATUS rt_status = RT_STATUS_SUCCESS;
-#ifdef RTL8192U
- return rt_status;
-#else
- struct r8192_priv *priv = ieee80211_priv(dev);
u16 frag_threshold;
u16 frag_length = 0, frag_offset = 0;
rt_firmware *pfirmware = priv->pFirmware;
PTX_FWINFO_8190PCI pTxFwInfo = NULL;
int i;
- //spin_lock_irqsave(&priv->tx_lock,flags);
RT_TRACE(COMP_CMDPKT,"%s(),buffer_len is %d\n",__FUNCTION__,buffer_len);
- firmware_init_param(dev);
+ firmware_init_param(priv);
//Fragmentation might be required
frag_threshold = pfirmware->cmdpacket_frag_thresold;
do {
/* Allocate skb buffer to contain firmware info and tx descriptor info
* add 4 to avoid packet appending overflow.
* */
-#ifdef RTL8192U
- skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
-#else
skb = dev_alloc_skb(frag_length + priv->ieee80211->tx_headroom + 4);
-#endif
if(skb == NULL) {
rt_status = RT_STATUS_FAILURE;
goto Failed;
}
- memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->queue_index = TXCMD_QUEUE;
tcb_desc->bCmdOrInit = packettype;
tcb_desc->bLastIniPkt = bLastIniPkt;
tcb_desc->pkt_size = frag_length;
-#ifdef RTL8192U
- skb_reserve(skb, USB_HWDESC_HEADER_LEN);
-#endif
-
//seg_ptr = skb_put(skb, frag_length + priv->ieee80211->tx_headroom);
seg_ptr = skb_put(skb, priv->ieee80211->tx_headroom);
*seg_ptr++ = ((i+3)<frag_length)?code_virtual_address[i+0]:0;
}
skb_put(skb, i);
- priv->ieee80211->softmac_hard_start_xmit(skb,dev);
+ priv->ieee80211->softmac_hard_start_xmit(skb, priv->ieee80211);
code_virtual_address += frag_length;
frag_offset += frag_length;
}while(frag_offset < buffer_len);
Failed:
- //spin_unlock_irqrestore(&priv->tx_lock,flags);
return rt_status;
-
-
-#endif
}
-static void
-cmpk_count_txstatistic(
- struct net_device *dev,
- cmpk_txfb_t *pstx_fb)
+static void cmpk_count_txstatistic(struct r8192_priv *priv, cmpk_txfb_t *pstx_fb)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
#ifdef ENABLE_PS
RT_RF_POWER_STATE rtState;
* refer to chapter "TX Feedback Element". We have to read 20 bytes
* in the command packet.
*/
-static void
-cmpk_handle_tx_feedback(
- struct net_device *dev,
- u8 * pmsg)
+static void cmpk_handle_tx_feedback(struct r8192_priv *priv, u8 *pmsg)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
cmpk_txfb_t rx_tx_fb; /* */
priv->stats.txfeedback++;
memcpy((u8*)&rx_tx_fb, pmsg, sizeof(cmpk_txfb_t));
/* Use tx feedback info to count TX statistics. */
- cmpk_count_txstatistic(dev, &rx_tx_fb);
+ cmpk_count_txstatistic(priv, &rx_tx_fb);
}
* ws-07-0063-v06-rtl819x-command-packet-specification-070315.doc.
* Please refer to chapter "Interrupt Status Element".
*/
-static void
-cmpk_handle_interrupt_status(
- struct net_device *dev,
- u8* pmsg)
+static void cmpk_handle_interrupt_status(struct r8192_priv *priv, u8 *pmsg)
{
cmpk_intr_sta_t rx_intr_status; /* */
- struct r8192_priv *priv = ieee80211_priv(dev);
DMESG("---> cmpk_Handle_Interrupt_Status()\n");
* ws-06-0063-rtl8190-command-packet-specification. Please
* refer to chapter "Beacon State Element".
*/
-static void
-cmpk_handle_query_config_rx(
- struct net_device *dev,
- u8* pmsg)
+static void cmpk_handle_query_config_rx(struct r8192_priv *priv, u8 *pmsg)
{
cmpk_query_cfg_t rx_query_cfg; /* */
* Count aggregated tx status from firmwar of one type rx command
* packet element id = RX_TX_STATUS.
*/
-static void cmpk_count_tx_status( struct net_device *dev,
- cmpk_tx_status_t *pstx_status)
+static void cmpk_count_tx_status(struct r8192_priv *priv, cmpk_tx_status_t *pstx_status)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
#ifdef ENABLE_PS
* Firmware add a new tx feedback status to reduce rx command
* packet buffer operation load.
*/
-static void
-cmpk_handle_tx_status(
- struct net_device *dev,
- u8* pmsg)
+static void cmpk_handle_tx_status(struct r8192_priv *priv, u8 *pmsg)
{
cmpk_tx_status_t rx_tx_sts; /* */
memcpy((void*)&rx_tx_sts, (void*)pmsg, sizeof(cmpk_tx_status_t));
/* 2. Use tx feedback info to count TX statistics. */
- cmpk_count_tx_status(dev, &rx_tx_sts);
+ cmpk_count_tx_status(priv, &rx_tx_sts);
}
/* Firmware add a new tx rate history */
-static void
-cmpk_handle_tx_rate_history(
- struct net_device *dev,
- u8* pmsg)
+static void cmpk_handle_tx_rate_history(struct r8192_priv *priv, u8 *pmsg)
{
u8 i;
u16 length = sizeof(cmpk_tx_rahis_t);
* command packet now. Please refer to document
* ws-06-0063-rtl8190-command-packet-specification.
*/
-u32 cmpk_message_handle_rx(struct net_device *dev, struct ieee80211_rx_stats *pstats)
+u32 cmpk_message_handle_rx(struct r8192_priv *priv, struct ieee80211_rx_stats *pstats)
{
// u32 debug_level = DBG_LOUD;
int total_length;
case RX_TX_FEEDBACK:
RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx():RX_TX_FEEDBACK\n");
- cmpk_handle_tx_feedback (dev, pcmd_buff);
+ cmpk_handle_tx_feedback(priv, pcmd_buff);
cmd_length = CMPK_RX_TX_FB_SIZE;
break;
case RX_INTERRUPT_STATUS:
RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx():RX_INTERRUPT_STATUS\n");
- cmpk_handle_interrupt_status(dev, pcmd_buff);
+ cmpk_handle_interrupt_status(priv, pcmd_buff);
cmd_length = sizeof(cmpk_intr_sta_t);
break;
case BOTH_QUERY_CONFIG:
RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx():BOTH_QUERY_CONFIG\n");
- cmpk_handle_query_config_rx(dev, pcmd_buff);
+ cmpk_handle_query_config_rx(priv, pcmd_buff);
cmd_length = CMPK_BOTH_QUERY_CONFIG_SIZE;
break;
case RX_TX_STATUS:
RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx():RX_TX_STATUS\n");
- cmpk_handle_tx_status(dev, pcmd_buff);
+ cmpk_handle_tx_status(priv, pcmd_buff);
cmd_length = CMPK_RX_TX_STS_SIZE;
break;
//DbgPrint(" rx tx rate history\r\n");
RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx():RX_TX_HISTORY\n");
- cmpk_handle_tx_rate_history(dev, pcmd_buff);
+ cmpk_handle_tx_rate_history(priv, pcmd_buff);
cmd_length = CMPK_TX_RAHIS_SIZE;
break;
projects / ~andy / linux / blobdiff