* Agere Systems Inc.
* 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
*
- * Copyright © 2005 Agere Systems Inc.
+ * Copyright © 2005 Agere Systems Inc.
* All rights reserved.
* http://www.agere.com
*
* software indicates your acceptance of these terms and conditions. If you do
* not agree with these terms and conditions, do not use the software.
*
- * Copyright © 2005 Agere Systems Inc.
+ * Copyright © 2005 Agere Systems Inc.
* All rights reserved.
*
* Redistribution and use in source or binary forms, with or without
*
* Disclaimer
*
- * THIS SOFTWARE IS PROVIDED \93AS IS\94 AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
* USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
* Do not change these values: if changed, then change also in respective
* TXdma and Rxdma engines
*/
-#define NUM_DESC_PER_RING_TX 512 // TX Do not change these values
+#define NUM_DESC_PER_RING_TX 512 /* TX Do not change these values */
#define NUM_TCB 64
/*
#define MP_TEST_FLAGS(_M, _F) (((_M)->Flags & (_F)) == (_F))
#define MP_IS_FLAG_CLEAR(_M, _F) (((_M)->Flags & (_F)) == 0)
-#define MP_INC_RCV_REF(_A) atomic_inc(&(_A)->RcvRefCount)
-#define MP_DEC_RCV_REF(_A) atomic_dec(&(_A)->RcvRefCount)
-#define MP_GET_RCV_REF(_A) atomic_read(&(_A)->RcvRefCount)
-
/* Macros specific to the private adapter structure */
#define MP_TCB_RESOURCES_AVAILABLE(_M) ((_M)->TxRing.nBusySend < NUM_TCB)
#define MP_TCB_RESOURCES_NOT_AVAILABLE(_M) ((_M)->TxRing.nBusySend >= NUM_TCB)
#define MP_SHOULD_FAIL_SEND(_M) ((_M)->Flags & fMP_ADAPTER_FAIL_SEND_MASK)
#define MP_IS_NOT_READY(_M) ((_M)->Flags & fMP_ADAPTER_NOT_READY_MASK)
-#define MP_IS_READY(_M) !((_M)->Flags & fMP_ADAPTER_NOT_READY_MASK)
+#define MP_IS_READY(_M) (!((_M)->Flags & fMP_ADAPTER_NOT_READY_MASK))
-#define MP_HAS_CABLE(_M) !((_M)->Flags & fMP_ADAPTER_NO_CABLE)
-#define MP_LINK_DETECTED(_M) !((_M)->Flags & fMP_ADAPTER_LINK_DETECTION)
+#define MP_HAS_CABLE(_M) (!((_M)->Flags & fMP_ADAPTER_NO_CABLE))
+#define MP_LINK_DETECTED(_M) (!((_M)->Flags & fMP_ADAPTER_LINK_DETECTION))
/* Counters for error rate monitoring */
typedef struct _MP_ERR_COUNTERS {
typedef struct _MP_RFD {
struct list_head list_node;
struct sk_buff *Packet;
- u32 PacketSize; // total size of receive frame
+ u32 PacketSize; /* total size of receive frame */
u16 iBufferIndex;
u8 iRingIndex;
} MP_RFD, *PMP_RFD;
/* Struct to define some device statistics */
typedef struct _ce_stats_t {
/* Link Input/Output stats */
- uint64_t ipackets; // # of in packets
- uint64_t opackets; // # of out packets
+ uint64_t ipackets; /* # of in packets */
+ uint64_t opackets; /* # of out packets */
/* MIB II variables
*
* MUST have 32, then we'll need another way to perform atomic
* operations
*/
- u32 unircv; // # multicast packets received
- atomic_t unixmt; // # multicast packets for Tx
- u32 multircv; // # multicast packets received
- atomic_t multixmt; // # multicast packets for Tx
- u32 brdcstrcv; // # broadcast packets received
- atomic_t brdcstxmt; // # broadcast packets for Tx
- u32 norcvbuf; // # Rx packets discarded
- u32 noxmtbuf; // # Tx packets discarded
+ u32 unircv; /* # multicast packets received */
+ atomic_t unixmt; /* # multicast packets for Tx */
+ u32 multircv; /* # multicast packets received */
+ atomic_t multixmt; /* # multicast packets for Tx */
+ u32 brdcstrcv; /* # broadcast packets received */
+ atomic_t brdcstxmt; /* # broadcast packets for Tx */
+ u32 norcvbuf; /* # Rx packets discarded */
+ u32 noxmtbuf; /* # Tx packets discarded */
/* Transciever state informations. */
u8 xcvr_addr;
u32 xcvr_id;
/* Tx Statistics. */
- u32 tx_uflo; // Tx Underruns
+ u32 tx_uflo; /* Tx Underruns */
u32 collisions;
u32 excessive_collisions;
u32 tx_deferred;
/* Rx Statistics. */
- u32 rx_ov_flow; // Rx Over Flow
+ u32 rx_ov_flow; /* Rx Over Flow */
u32 length_err;
u32 alignment_err;
u32 pci_cfg_state[64 / sizeof(u32)];
/* Registry parameters */
- u8 SpeedDuplex; // speed/duplex
- eFLOW_CONTROL_t RegistryFlowControl; // for 802.3x flow control
- u8 RegistryWOLMatch; // Enable WOL pattern-matching
- u8 RegistryWOLLink; // Link state change is independant
- u8 RegistryPhyComa; // Phy Coma mode enable/disable
+ u8 SpeedDuplex; /* speed/duplex */
+ eFLOW_CONTROL_t RegistryFlowControl; /* for 802.3x flow control */
+ u8 RegistryWOLMatch; /* Enable WOL pattern-matching */
+ u8 RegistryWOLLink; /* Link state change is independant */
+ u8 RegistryPhyComa; /* Phy Coma mode enable/disable */
- u32 RegistryRxMemEnd; // Size of internal rx memory
- u8 RegistryMACStat; // If set, read MACSTAT, else don't
- u32 RegistryVlanTag; // 802.1q Vlan TAG
- u32 RegistryJumboPacket; // Max supported ethernet packet size
+ u32 RegistryRxMemEnd; /* Size of internal rx memory */
+ u8 RegistryMACStat; /* If set, read MACSTAT, else don't */
+ u32 RegistryVlanTag; /* 802.1q Vlan TAG */
+ u32 RegistryJumboPacket; /* Max supported ethernet packet size */
u32 RegistryTxNumBuffers;
u32 RegistryTxTimeInterval;
u8 RegistryNMIDisable;
u32 RegistryDMACache;
u32 RegistrySCGain;
- u8 RegistryPhyLoopbk; // Enable Phy loopback
+ u8 RegistryPhyLoopbk; /* Enable Phy loopback */
/* Derived from the registry: */
- u8 AiForceDpx; // duplex setting
- u16 AiForceSpeed; // 'Speed', user over-ride of line speed
- eFLOW_CONTROL_t FlowControl; // flow control validated by the far-end
+ u8 AiForceDpx; /* duplex setting */
+ u16 AiForceSpeed; /* 'Speed', user over-ride of line speed */
+ eFLOW_CONTROL_t FlowControl; /* flow control validated by the far-end */
enum {
NETIF_STATUS_INVALID = 0,
NETIF_STATUS_MEDIA_CONNECT,
MP_POWER_MGMT PoMgmt;
INTERRUPT_t CachedMaskValue;
- atomic_t RcvRefCount; // Num packets not yet returned
-
/* Xcvr status at last poll */
MI_BMSR_t Bmsr;
PCI_CFG_SPACE_REGS PciCfgRegs;
/* Loopback specifics */
- u8 ReplicaPhyLoopbk; // Replica Enable
- u8 ReplicaPhyLoopbkPF; // Replica Enable Pass/Fail
+ u8 ReplicaPhyLoopbk; /* Replica Enable */
+ u8 ReplicaPhyLoopbkPF; /* Replica Enable Pass/Fail */
/* Stats */
CE_STATS_t Stats;
projects / ~andy / linux / blobdiff