#undef DEBUG_HARD
#undef USE_CTRL_O_SYSRQ
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/tty.h>
static struct uart_driver pmz_uart_reg = {
.owner = THIS_MODULE,
.driver_name = "ttyS",
- .devfs_name = "tts/",
.dev_name = "ttyS",
.major = TTY_MAJOR,
};
}
pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
- if (request_irq(uap->port.irq, pmz_interrupt, SA_SHIRQ, "PowerMac Zilog", uap)) {
+ if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) {
dev_err(&uap->dev->ofdev.dev,
"Unable to register zs interrupt handler.\n");
pmz_set_scc_power(uap, 0);
static int __init pmz_init_port(struct uart_pmac_port *uap)
{
struct device_node *np = uap->node;
- char *conn;
- struct slot_names_prop {
+ const char *conn;
+ const struct slot_names_prop {
int count;
char name[1];
} *slots;
uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
goto no_dma;
}
- uap->tx_dma_irq = np->intrs[1].line;
- uap->rx_dma_irq = np->intrs[2].line;
+ uap->tx_dma_irq = irq_of_parse_and_map(np, 1);
+ uap->rx_dma_irq = irq_of_parse_and_map(np, 2);
}
no_dma:
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
uap->port_type = PMAC_SCC_ASYNC;
/* 1999 Powerbook G3 has slot-names property instead */
- slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
+ slots = get_property(np, "slot-names", &len);
if (slots && slots->count > 0) {
if (strcmp(slots->name, "IrDA") == 0)
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
if (ZS_IS_INTMODEM(uap)) {
struct device_node* i2c_modem = find_devices("i2c-modem");
if (i2c_modem) {
- char* mid = get_property(i2c_modem, "modem-id", NULL);
+ const char* mid =
+ get_property(i2c_modem, "modem-id", NULL);
if (mid) switch(*mid) {
case 0x04 :
case 0x05 :
* Init remaining bits of "port" structure
*/
uap->port.iotype = UPIO_MEM;
- uap->port.irq = np->intrs[0].line;
+ uap->port.irq = irq_of_parse_and_map(np, 0);
uap->port.uartclk = ZS_CLOCK;
uap->port.fifosize = 1;
uap->port.ops = &pmz_pops;
#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+static void pmz_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+
+ /* Wait for the transmit buffer to empty. */
+ while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
+ udelay(5);
+ write_zsdata(uap, ch);
+}
+
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
{
struct uart_pmac_port *uap = &pmz_ports[con->index];
unsigned long flags;
- int i;
if (ZS_IS_ASLEEP(uap))
return;
write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB);
write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR);
- for (i = 0; i < count; i++) {
- /* Wait for the transmit buffer to empty. */
- while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
- udelay(5);
- write_zsdata(uap, s[i]);
- if (s[i] == 10) {
- while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
- udelay(5);
- write_zsdata(uap, R13);
- }
- }
+ uart_console_write(&uap->port, s, count, pmz_console_putchar);
/* Restore the values in the registers. */
write_zsreg(uap, R1, uap->curregs[1]);