[SCSI] use a completion in scsi_send_eh_cmnd

[~andy/linux] / drivers / scsi / scsi_error.c

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 5a30485d5038c3ddf57b027de94ba588eaffa46f..18c5d252301441b287735e74b0dfae07c48b75af 100644 (file)
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -416,44 +416,16 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd)
        return FAILED;
 }
 
-/**
- * scsi_eh_times_out - timeout function for error handling.
- * @scmd:      Cmd that is timing out.
- *
- * Notes:
- *    During error handling, the kernel thread will be sleeping waiting
- *    for some action to complete on the device.  our only job is to
- *    record that it timed out, and to wake up the thread.
- **/
-static void scsi_eh_times_out(struct scsi_cmnd *scmd)
-{
-       scmd->eh_eflags |= SCSI_EH_REC_TIMEOUT;
-       SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd:%p\n", __FUNCTION__,
-                                         scmd));
-
-       up(scmd->device->host->eh_action);
-}
-
 /**
  * scsi_eh_done - Completion function for error handling.
  * @scmd:      Cmd that is done.
  **/
 static void scsi_eh_done(struct scsi_cmnd *scmd)
 {
-       /*
-        * if the timeout handler is already running, then just set the
-        * flag which says we finished late, and return.  we have no
-        * way of stopping the timeout handler from running, so we must
-        * always defer to it.
-        */
-       if (del_timer(&scmd->eh_timeout)) {
-               scmd->request->rq_status = RQ_SCSI_DONE;
-
-               SCSI_LOG_ERROR_RECOVERY(3, printk("%s scmd: %p result: %x\n",
-                                          __FUNCTION__, scmd, scmd->result));
-
-               up(scmd->device->host->eh_action);
-       }
+       SCSI_LOG_ERROR_RECOVERY(3,
+               printk("%s scmd: %p result: %x\n",
+                       __FUNCTION__, scmd, scmd->result));
+       complete(scmd->device->host->eh_action);
 }
 
 /**
@@ -461,10 +433,6 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
  * @scmd:      SCSI Cmd to send.
  * @timeout:   Timeout for cmd.
  *
- * Notes:
- *    The initialization of the structures is quite a bit different in
- *    this case, and furthermore, there is a different completion handler
- *    vs scsi_dispatch_cmd.
  * Return value:
  *    SUCCESS or FAILED or NEEDS_RETRY
  **/
@@ -472,24 +440,16 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
 {
        struct scsi_device *sdev = scmd->device;
        struct Scsi_Host *shost = sdev->host;
-       DECLARE_MUTEX_LOCKED(sem);
+       DECLARE_COMPLETION(done);
+       unsigned long timeleft;
        unsigned long flags;
-       int rtn = SUCCESS;
+       int rtn;
 
-       /*
-        * we will use a queued command if possible, otherwise we will
-        * emulate the queuing and calling of completion function ourselves.
-        */
        if (sdev->scsi_level <= SCSI_2)
                scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) |
                        (sdev->lun << 5 & 0xe0);
 
-       scsi_add_timer(scmd, timeout, scsi_eh_times_out);
-
-       /*
-        * set up the semaphore so we wait for the command to complete.
-        */
-       shost->eh_action = &sem;
+       shost->eh_action = &done;
        scmd->request->rq_status = RQ_SCSI_BUSY;
 
        spin_lock_irqsave(shost->host_lock, flags);
@@ -497,47 +457,29 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
        shost->hostt->queuecommand(scmd, scsi_eh_done);
        spin_unlock_irqrestore(shost->host_lock, flags);
 
-       down(&sem);
-       scsi_log_completion(scmd, SUCCESS);
+       timeleft = wait_for_completion_timeout(&done, timeout);
 
+       scmd->request->rq_status = RQ_SCSI_DONE;
        shost->eh_action = NULL;
 
-       /*
-        * see if timeout.  if so, tell the host to forget about it.
-        * in other words, we don't want a callback any more.
-        */
-       if (scmd->eh_eflags & SCSI_EH_REC_TIMEOUT) {
-               scmd->eh_eflags &= ~SCSI_EH_REC_TIMEOUT;
-
-               /*
-                * as far as the low level driver is
-                * concerned, this command is still active, so
-                * we must give the low level driver a chance
-                * to abort it. (db) 
-                *
-                * FIXME(eric) - we are not tracking whether we could
-                * abort a timed out command or not.  not sure how
-                * we should treat them differently anyways.
-                */
-               if (shost->hostt->eh_abort_handler)
-                       shost->hostt->eh_abort_handler(scmd);
-                       
-               scmd->request->rq_status = RQ_SCSI_DONE;
-               rtn = FAILED;
-       }
+       scsi_log_completion(scmd, SUCCESS);
 
-       SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd: %p, rtn:%x\n",
-                                         __FUNCTION__, scmd, rtn));
+       SCSI_LOG_ERROR_RECOVERY(3,
+               printk("%s: scmd: %p, timeleft: %ld\n",
+                       __FUNCTION__, scmd, timeleft));
 
        /*
-        * now examine the actual status codes to see whether the command
-        * actually did complete normally.
+        * If there is time left scsi_eh_done got called, and we will
+        * examine the actual status codes to see whether the command
+        * actually did complete normally, else tell the host to forget
+        * about this command.
         */
-       if (rtn == SUCCESS) {
+       if (timeleft) {
                rtn = scsi_eh_completed_normally(scmd);
                SCSI_LOG_ERROR_RECOVERY(3,
                        printk("%s: scsi_eh_completed_normally %x\n",
                               __FUNCTION__, rtn));
+
                switch (rtn) {
                case SUCCESS:
                case NEEDS_RETRY:
@@ -547,6 +489,15 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
                        rtn = FAILED;
                        break;
                }
+       } else {
+               /*
+                * FIXME(eric) - we are not tracking whether we could
+                * abort a timed out command or not.  not sure how
+                * we should treat them differently anyways.
+                */
+               if (shost->hostt->eh_abort_handler)
+                       shost->hostt->eh_abort_handler(scmd);
+               rtn = FAILED;
        }
 
        return rtn;