max_speed = 4;
else if (phba->lmt & LMT_2Gb)
max_speed = 2;
- else
+ else if (phba->lmt & LMT_1Gb)
max_speed = 1;
+ else
+ max_speed = 0;
vp = &phba->vpd;
if (descp && descp[0] == '\0') {
if (oneConnect)
snprintf(descp, 255,
- "Emulex OneConnect %s, %s Initiator, Port %s",
+ "Emulex OneConnect %s, %s Initiator %s",
m.name, m.function,
phba->Port);
+ else if (max_speed == 0)
+ snprintf(descp, 255,
+ "Emulex %s %s %s ",
+ m.name, m.bus, m.function);
else
snprintf(descp, 255,
"Emulex %s %d%s %s %s",
return link_speed;
}
+/**
+ * lpfc_sli_port_speed_get - Get sli3 link speed code to link speed
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to get an SLI3 FC port's link speed in Mbps.
+ *
+ * Return: link speed in terms of Mbps.
+ **/
+uint32_t
+lpfc_sli_port_speed_get(struct lpfc_hba *phba)
+{
+ uint32_t link_speed;
+
+ if (!lpfc_is_link_up(phba))
+ return 0;
+
+ switch (phba->fc_linkspeed) {
+ case LPFC_LINK_SPEED_1GHZ:
+ link_speed = 1000;
+ break;
+ case LPFC_LINK_SPEED_2GHZ:
+ link_speed = 2000;
+ break;
+ case LPFC_LINK_SPEED_4GHZ:
+ link_speed = 4000;
+ break;
+ case LPFC_LINK_SPEED_8GHZ:
+ link_speed = 8000;
+ break;
+ case LPFC_LINK_SPEED_10GHZ:
+ link_speed = 10000;
+ break;
+ case LPFC_LINK_SPEED_16GHZ:
+ link_speed = 16000;
+ break;
+ default:
+ link_speed = 0;
+ }
+ return link_speed;
+}
+
+/**
+ * lpfc_sli4_port_speed_parse - Parse async evt link speed code to link speed
+ * @phba: pointer to lpfc hba data structure.
+ * @evt_code: asynchronous event code.
+ * @speed_code: asynchronous event link speed code.
+ *
+ * This routine is to parse the giving SLI4 async event link speed code into
+ * value of Mbps for the link speed.
+ *
+ * Return: link speed in terms of Mbps.
+ **/
+static uint32_t
+lpfc_sli4_port_speed_parse(struct lpfc_hba *phba, uint32_t evt_code,
+ uint8_t speed_code)
+{
+ uint32_t port_speed;
+
+ switch (evt_code) {
+ case LPFC_TRAILER_CODE_LINK:
+ switch (speed_code) {
+ case LPFC_EVT_CODE_LINK_NO_LINK:
+ port_speed = 0;
+ break;
+ case LPFC_EVT_CODE_LINK_10_MBIT:
+ port_speed = 10;
+ break;
+ case LPFC_EVT_CODE_LINK_100_MBIT:
+ port_speed = 100;
+ break;
+ case LPFC_EVT_CODE_LINK_1_GBIT:
+ port_speed = 1000;
+ break;
+ case LPFC_EVT_CODE_LINK_10_GBIT:
+ port_speed = 10000;
+ break;
+ default:
+ port_speed = 0;
+ }
+ break;
+ case LPFC_TRAILER_CODE_FC:
+ switch (speed_code) {
+ case LPFC_EVT_CODE_FC_NO_LINK:
+ port_speed = 0;
+ break;
+ case LPFC_EVT_CODE_FC_1_GBAUD:
+ port_speed = 1000;
+ break;
+ case LPFC_EVT_CODE_FC_2_GBAUD:
+ port_speed = 2000;
+ break;
+ case LPFC_EVT_CODE_FC_4_GBAUD:
+ port_speed = 4000;
+ break;
+ case LPFC_EVT_CODE_FC_8_GBAUD:
+ port_speed = 8000;
+ break;
+ case LPFC_EVT_CODE_FC_10_GBAUD:
+ port_speed = 10000;
+ break;
+ case LPFC_EVT_CODE_FC_16_GBAUD:
+ port_speed = 16000;
+ break;
+ default:
+ port_speed = 0;
+ }
+ break;
+ default:
+ port_speed = 0;
+ }
+ return port_speed;
+}
+
/**
* lpfc_sli4_async_link_evt - Process the asynchronous FCoE link event
* @phba: pointer to lpfc hba data structure.
/* Keep the link status for extra SLI4 state machine reference */
phba->sli4_hba.link_state.speed =
- bf_get(lpfc_acqe_link_speed, acqe_link);
+ lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_LINK,
+ bf_get(lpfc_acqe_link_speed, acqe_link));
phba->sli4_hba.link_state.duplex =
bf_get(lpfc_acqe_link_duplex, acqe_link);
phba->sli4_hba.link_state.status =
phba->sli4_hba.link_state.fault =
bf_get(lpfc_acqe_link_fault, acqe_link);
phba->sli4_hba.link_state.logical_speed =
- bf_get(lpfc_acqe_logical_link_speed, acqe_link);
+ bf_get(lpfc_acqe_logical_link_speed, acqe_link) * 10;
+
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"2900 Async FC/FCoE Link event - Speed:%dGBit "
"duplex:x%x LA Type:x%x Port Type:%d Port Number:%d "
phba->sli4_hba.link_state.status,
phba->sli4_hba.link_state.type,
phba->sli4_hba.link_state.number,
- phba->sli4_hba.link_state.logical_speed * 10,
+ phba->sli4_hba.link_state.logical_speed,
phba->sli4_hba.link_state.fault);
/*
* For FC Mode: issue the READ_TOPOLOGY mailbox command to fetch
}
/* Keep the link status for extra SLI4 state machine reference */
phba->sli4_hba.link_state.speed =
- bf_get(lpfc_acqe_fc_la_speed, acqe_fc);
+ lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_FC,
+ bf_get(lpfc_acqe_fc_la_speed, acqe_fc));
phba->sli4_hba.link_state.duplex = LPFC_ASYNC_LINK_DUPLEX_FULL;
phba->sli4_hba.link_state.topology =
bf_get(lpfc_acqe_fc_la_topology, acqe_fc);
phba->sli4_hba.link_state.fault =
bf_get(lpfc_acqe_link_fault, acqe_fc);
phba->sli4_hba.link_state.logical_speed =
- bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc);
+ bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc) * 10;
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"2896 Async FC event - Speed:%dGBaud Topology:x%x "
"LA Type:x%x Port Type:%d Port Number:%d Logical speed:"
phba->sli4_hba.link_state.status,
phba->sli4_hba.link_state.type,
phba->sli4_hba.link_state.number,
- phba->sli4_hba.link_state.logical_speed * 10,
+ phba->sli4_hba.link_state.logical_speed,
phba->sli4_hba.link_state.fault);
pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
case LPFC_SLI_EVENT_STATUS_VALID:
return; /* no message if the sfp is okay */
case LPFC_SLI_EVENT_STATUS_NOT_PRESENT:
- sprintf(message, "Not installed");
+ sprintf(message, "Optics faulted/incorrectly installed/not " \
+ "installed - Reseat optics, if issue not "
+ "resolved, replace.");
break;
case LPFC_SLI_EVENT_STATUS_WRONG_TYPE:
sprintf(message,
- "Optics of two types installed");
+ "Optics of two types installed - Remove one optic or " \
+ "install matching pair of optics.");
break;
case LPFC_SLI_EVENT_STATUS_UNSUPPORTED:
- sprintf(message, "Incompatible optics");
+ sprintf(message, "Incompatible optics - Replace with " \
+ "compatible optics for card to function.");
break;
default:
/* firmware is reporting a status we don't know about */
phba->fcoe_eventtag = acqe_grp5->event_tag;
prev_ll_spd = phba->sli4_hba.link_state.logical_speed;
phba->sli4_hba.link_state.logical_speed =
- (bf_get(lpfc_acqe_grp5_llink_spd, acqe_grp5));
+ (bf_get(lpfc_acqe_grp5_llink_spd, acqe_grp5)) * 10;
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"2789 GRP5 Async Event: Updating logical link speed "
- "from %dMbps to %dMbps\n", (prev_ll_spd * 10),
- (phba->sli4_hba.link_state.logical_speed*10));
+ "from %dMbps to %dMbps\n", prev_ll_spd,
+ phba->sli4_hba.link_state.logical_speed);
}
/**
/**
* lpfc_write_firmware - attempt to write a firmware image to the port
- * @phba: pointer to lpfc hba data structure.
* @fw: pointer to firmware image returned from request_firmware.
+ * @phba: pointer to lpfc hba data structure.
*
- * returns the number of bytes written if write is successful.
- * returns a negative error value if there were errors.
- * returns 0 if firmware matches currently active firmware on port.
**/
-int
-lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
+static void
+lpfc_write_firmware(const struct firmware *fw, void *context)
{
+ struct lpfc_hba *phba = (struct lpfc_hba *)context;
char fwrev[FW_REV_STR_SIZE];
- struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data;
+ struct lpfc_grp_hdr *image;
struct list_head dma_buffer_list;
int i, rc = 0;
struct lpfc_dmabuf *dmabuf, *next;
uint32_t offset = 0, temp_offset = 0;
+ /* It can be null, sanity check */
+ if (!fw) {
+ rc = -ENXIO;
+ goto out;
+ }
+ image = (struct lpfc_grp_hdr *)fw->data;
+
INIT_LIST_HEAD(&dma_buffer_list);
if ((be32_to_cpu(image->magic_number) != LPFC_GROUP_OJECT_MAGIC_NUM) ||
(bf_get_be32(lpfc_grp_hdr_file_type, image) !=
be32_to_cpu(image->magic_number),
bf_get_be32(lpfc_grp_hdr_file_type, image),
bf_get_be32(lpfc_grp_hdr_id, image));
- return -EINVAL;
+ rc = -EINVAL;
+ goto release_out;
}
lpfc_decode_firmware_rev(phba, fwrev, 1);
if (strncmp(fwrev, image->revision, strnlen(image->revision, 16))) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "3023 Updating Firmware. Current Version:%s "
+ "3023 Updating Firmware, Current Version:%s "
"New Version:%s\n",
fwrev, image->revision);
for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) {
GFP_KERNEL);
if (!dmabuf) {
rc = -ENOMEM;
- goto out;
+ goto release_out;
}
dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
SLI4_PAGE_SIZE,
if (!dmabuf->virt) {
kfree(dmabuf);
rc = -ENOMEM;
- goto out;
+ goto release_out;
}
list_add_tail(&dmabuf->list, &dma_buffer_list);
}
}
rc = lpfc_wr_object(phba, &dma_buffer_list,
(fw->size - offset), &offset);
- if (rc) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "3024 Firmware update failed. "
- "%d\n", rc);
- goto out;
- }
+ if (rc)
+ goto release_out;
}
rc = offset;
}
-out:
+
+release_out:
list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) {
list_del(&dmabuf->list);
dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE,
dmabuf->virt, dmabuf->phys);
kfree(dmabuf);
}
- return rc;
+ release_firmware(fw);
+out:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3024 Firmware update done: %d.", rc);
+ return;
}
/**
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
struct Scsi_Host *shost = NULL;
- int error;
+ int error, ret;
uint32_t cfg_mode, intr_mode;
int mcnt;
int adjusted_fcp_io_channel;
- const struct firmware *fw;
- uint8_t file_name[16];
+ uint8_t file_name[ELX_MODEL_NAME_SIZE];
/* Allocate memory for HBA structure */
phba = lpfc_hba_alloc(pdev);
/* check for firmware upgrade or downgrade (if_type 2 only) */
if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
LPFC_SLI_INTF_IF_TYPE_2) {
- snprintf(file_name, 16, "%s.grp", phba->ModelName);
- error = request_firmware(&fw, file_name, &phba->pcidev->dev);
- if (!error) {
- lpfc_write_firmware(phba, fw);
- release_firmware(fw);
- }
+ snprintf(file_name, ELX_MODEL_NAME_SIZE, "%s.grp",
+ phba->ModelName);
+ ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
+ file_name, &phba->pcidev->dev,
+ GFP_KERNEL, (void *)phba,
+ lpfc_write_firmware);
}
/* Check if there are static vports to be created. */
projects / ~andy / linux / blobdiff