};
#endif
+/* 1b80:e425 MaxMedia UB425-TC
+ * GPIO_6 - demod reset, 0=active
+ * GPIO_7 - LED, 0=active
+ */
+static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
+ {EM2874_R80_GPIO, 0x83, 0xff, 100},
+ {EM2874_R80_GPIO, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
+ {-1, -1, -1, -1},
+};
+
+/* 2304:0242 PCTV QuatroStick (510e)
+ * GPIO_2: decoder reset, 0=active
+ * GPIO_4: decoder suspend, 0=active
+ * GPIO_6: demod reset, 0=active
+ * GPIO_7: LED, 1=active
+ */
+static struct em28xx_reg_seq pctv_510e[] = {
+ {EM2874_R80_GPIO, 0x10, 0xff, 100},
+ {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
+ {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
+ { -1, -1, -1, -1},
+};
+
+/* 2013:0251 PCTV QuatroStick nano (520e)
+ * GPIO_2: decoder reset, 0=active
+ * GPIO_4: decoder suspend, 0=active
+ * GPIO_6: demod reset, 0=active
+ * GPIO_7: LED, 1=active
+ */
+static struct em28xx_reg_seq pctv_520e[] = {
+ {EM2874_R80_GPIO, 0x10, 0xff, 100},
+ {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
+ {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
+ { -1, -1, -1, -1},
+};
+
/*
* Board definitions
*/
.amux = EM28XX_AMUX_LINE_IN,
} },
},
+ /* 1b80:e425 MaxMedia UB425-TC
+ * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */
+ [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
+ .name = "MaxMedia UB425-TC",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = maxmedia_ub425_tc,
+ .has_dvb = 1,
+ .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
+ EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
+ /* 2304:0242 PCTV QuatroStick (510e)
+ * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
+ [EM2884_BOARD_PCTV_510E] = {
+ .name = "PCTV QuatroStick (510e)",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = pctv_510e,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
+ EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
+ /* 2013:0251 PCTV QuatroStick nano (520e)
+ * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
+ [EM2884_BOARD_PCTV_520E] = {
+ .name = "PCTV QuatroStick nano (520e)",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = pctv_520e,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
+ EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
};
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
.driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
{ USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
.driver_info = EM2860_BOARD_EASYCAP },
+ { USB_DEVICE(0x1b80, 0xe425),
+ .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
+ { USB_DEVICE(0x2304, 0x0242),
+ .driver_info = EM2884_BOARD_PCTV_510E },
+ { USB_DEVICE(0x2013, 0x0251),
+ .driver_info = EM2884_BOARD_PCTV_520E },
{ },
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
return -1;
}
-/* ----------------------------------------------------------------------- */
-void em28xx_register_i2c_ir(struct em28xx *dev)
-{
- /* Leadtek winfast tv USBII deluxe can find a non working IR-device */
- /* at address 0x18, so if that address is needed for another board in */
- /* the future, please put it after 0x1f. */
- struct i2c_board_info info;
- const unsigned short addr_list[] = {
- 0x1f, 0x30, 0x47, I2C_CLIENT_END
- };
-
- if (disable_ir)
- return;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- memset(&dev->init_data, 0, sizeof(dev->init_data));
- strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
-
- /* detect & configure */
- switch (dev->model) {
- case EM2800_BOARD_TERRATEC_CINERGY_200:
- case EM2820_BOARD_TERRATEC_CINERGY_250:
- dev->init_data.ir_codes = RC_MAP_EM_TERRATEC;
- dev->init_data.get_key = em28xx_get_key_terratec;
- dev->init_data.name = "i2c IR (EM28XX Terratec)";
- break;
- case EM2820_BOARD_PINNACLE_USB_2:
- dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY;
- dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
- dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
- break;
- case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
- dev->init_data.ir_codes = RC_MAP_HAUPPAUGE;
- dev->init_data.get_key = em28xx_get_key_em_haup;
- dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
- break;
- case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
- dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
- dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
- dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
- break;
- }
-
- if (dev->init_data.name)
- info.platform_data = &dev->init_data;
- i2c_new_probed_device(&dev->i2c_adap, &info, addr_list, NULL);
-}
-
void em28xx_card_setup(struct em28xx *dev)
{
/*
break;
}
-#if defined(CONFIG_MODULES) && defined(MODULE)
- if (dev->board.has_ir_i2c && !disable_ir)
- request_module("ir-kbd-i2c");
-#endif
- if (dev->board.has_snapshot_button)
- em28xx_register_snapshot_button(dev);
-
if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
em28xx_errdev("\n\n");
em28xx_errdev("The support for this board weren't "
}
em28xx_tuner_setup(dev);
-
- if(!disable_ir)
- em28xx_ir_init(dev);
}
if (dev->board.has_dvb)
request_module("em28xx-dvb");
+ if (dev->board.has_ir_i2c && !disable_ir)
+ request_module("em28xx-rc");
}
static void request_modules(struct em28xx *dev)
*/
void em28xx_release_resources(struct em28xx *dev)
{
- if (dev->sbutton_input_dev)
- em28xx_deregister_snapshot_button(dev);
-
- if (dev->ir)
- em28xx_ir_fini(dev);
-
/*FIXME: I2C IR should be disconnected */
em28xx_release_analog_resources(dev);
int i, nr;
const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
char *speed;
- char descr[255] = "";
udev = usb_get_dev(interface_to_usbdev(interface));
speed = "unknown";
}
- if (udev->manufacturer)
- strlcpy(descr, udev->manufacturer, sizeof(descr));
-
- if (udev->product) {
- if (*descr)
- strlcat(descr, " ", sizeof(descr));
- strlcat(descr, udev->product, sizeof(descr));
- }
-
- if (*descr)
- strlcat(descr, " ", sizeof(descr));
-
printk(KERN_INFO DRIVER_NAME
- ": New device %s@ %s Mbps (%04x:%04x, interface %d, class %d)\n",
- descr,
+ ": New device %s %s @ %s Mbps "
+ "(%04x:%04x, interface %d, class %d)\n",
+ udev->manufacturer ? udev->manufacturer : "",
+ udev->product ? udev->product : "",
speed,
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct),
goto unlock_and_free;
}
+ if (has_dvb) {
+ /* pre-allocate DVB isoc transfer buffers */
+ retval = em28xx_alloc_isoc(dev, EM28XX_DIGITAL_MODE,
+ EM28XX_DVB_MAX_PACKETS,
+ EM28XX_DVB_NUM_BUFS,
+ dev->dvb_max_pkt_size);
+ if (retval) {
+ goto unlock_and_free;
+ }
+ }
+
request_modules(dev);
/* Should be the last thing to do, to avoid newer udev's to
video_device_node_name(dev->vdev));
dev->state |= DEV_MISCONFIGURED;
- em28xx_uninit_isoc(dev);
+ em28xx_uninit_isoc(dev, dev->mode);
dev->state |= DEV_DISCONNECTED;
wake_up_interruptible(&dev->wait_frame);
wake_up_interruptible(&dev->wait_stream);
em28xx_release_resources(dev);
}
+ /* free DVB isoc buffers */
+ em28xx_uninit_isoc(dev, EM28XX_DIGITAL_MODE);
+
mutex_unlock(&dev->lock);
em28xx_close_extension(dev);
projects / ~andy / linux / blobdiff