This is a driver for the ADP1653 flash controller. It is used for
example in Nokia N900.
+config VIDEO_AS3645A
+ tristate "AS3645A flash driver support"
+ depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+ ---help---
+ This is a driver for the AS3645A and LM3555 flash controllers. It has
+ build in control for flash, torch and indicator LEDs.
+
comment "Video improvement chips"
config VIDEO_UPD64031A
endmenu # encoder / decoder chips
-config VIDEO_SH_VOU
- tristate "SuperH VOU video output driver"
- depends on VIDEO_DEV && ARCH_SHMOBILE
- select VIDEOBUF_DMA_CONTIG
- help
- Support for the Video Output Unit (VOU) on SuperH SoCs.
-
-config VIDEO_VIU
- tristate "Freescale VIU Video Driver"
- depends on VIDEO_V4L2 && PPC_MPC512x
- select VIDEOBUF_DMA_CONTIG
- default y
- ---help---
- Support for Freescale VIU video driver. This device captures
- video data, or overlays video on DIU frame buffer.
-
- Say Y here if you want to enable VIU device on MPC5121e Rev2+.
- In doubt, say N.
-
config VIDEO_VIVI
tristate "Virtual Video Driver"
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
Say Y here if you want to test video apps or debug V4L devices.
In doubt, say N.
-source "drivers/media/video/davinci/Kconfig"
+#
+# USB Multimedia device configuration
+#
-source "drivers/media/video/omap/Kconfig"
+menuconfig V4L_USB_DRIVERS
+ bool "V4L USB devices"
+ depends on USB
+ default y
-source "drivers/media/video/bt8xx/Kconfig"
+if V4L_USB_DRIVERS
-config VIDEO_PMS
- tristate "Mediavision Pro Movie Studio Video For Linux"
- depends on ISA && VIDEO_V4L2
- help
- Say Y if you have such a thing.
+source "drivers/media/video/uvc/Kconfig"
+
+source "drivers/media/video/gspca/Kconfig"
+
+source "drivers/media/video/pvrusb2/Kconfig"
+
+source "drivers/media/video/hdpvr/Kconfig"
+
+source "drivers/media/video/em28xx/Kconfig"
+
+source "drivers/media/video/tlg2300/Kconfig"
+
+source "drivers/media/video/cx231xx/Kconfig"
+
+source "drivers/media/video/tm6000/Kconfig"
+
+source "drivers/media/video/usbvision/Kconfig"
+
+source "drivers/media/video/et61x251/Kconfig"
+
+source "drivers/media/video/sn9c102/Kconfig"
+
+source "drivers/media/video/pwc/Kconfig"
+
+source "drivers/media/video/cpia2/Kconfig"
+
+config USB_ZR364XX
+ tristate "USB ZR364XX Camera support"
+ depends on VIDEO_V4L2
+ select VIDEOBUF_GEN
+ select VIDEOBUF_VMALLOC
+ ---help---
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port.
+ See <file:Documentation/video4linux/zr364xx.txt> for more info
+ and list of supported cameras.
To compile this driver as a module, choose M here: the
- module will be called pms.
+ module will be called zr364xx.
-config VIDEO_BWQCAM
- tristate "Quickcam BW Video For Linux"
- depends on PARPORT && VIDEO_V4L2
- help
- Say Y have if you the black and white version of the QuickCam
- camera. See the next option for the color version.
+config USB_STKWEBCAM
+ tristate "USB Syntek DC1125 Camera support"
+ depends on VIDEO_V4L2 && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to use this type of camera.
+ Supported devices are typically found in some Asus laptops,
+ with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
+ may be supported by the stk11xx driver, from which this is
+ derived, see <http://sourceforge.net/projects/syntekdriver/>
To compile this driver as a module, choose M here: the
- module will be called bw-qcam.
+ module will be called stkwebcam.
-config VIDEO_CQCAM
- tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2
+config USB_S2255
+ tristate "USB Sensoray 2255 video capture device"
+ depends on VIDEO_V4L2
+ select VIDEOBUF_VMALLOC
+ default n
help
- This is the video4linux driver for the colour version of the
- Connectix QuickCam. If you have one of these cameras, say Y here,
- otherwise say N. This driver does not work with the original
- monochrome QuickCam, QuickCam VC or QuickClip. It is also available
- as a module (c-qcam).
- Read <file:Documentation/video4linux/CQcam.txt> for more information.
+ Say Y here if you want support for the Sensoray 2255 USB device.
+ This driver can be compiled as a module, called s2255drv.
-config VIDEO_W9966
- tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
- depends on PARPORT_1284 && PARPORT && VIDEO_V4L2
- help
- Video4linux driver for Winbond's w9966 based Webcams.
- Currently tested with the LifeView FlyCam Supra.
- If you have one of these cameras, say Y here
- otherwise say N.
- This driver is also available as a module (w9966).
+endif # V4L_USB_DRIVERS
- Check out <file:Documentation/video4linux/w9966.txt> for more
- information.
+#
+# PCI drivers configuration
+#
-source "drivers/media/video/cpia2/Kconfig"
+menuconfig V4L_PCI_DRIVERS
+ bool "V4L PCI(e) devices"
+ depends on PCI
+ default y
+ ---help---
+ Say Y here to enable support for these PCI(e) drivers.
-config VIDEO_VINO
- tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
- depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
- select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
- help
- Say Y here to build in support for the Vino video input system found
- on SGI Indy machines.
+if V4L_PCI_DRIVERS
-source "drivers/media/video/zoran/Kconfig"
+source "drivers/media/video/au0828/Kconfig"
+
+source "drivers/media/video/bt8xx/Kconfig"
+
+source "drivers/media/video/cx18/Kconfig"
+
+source "drivers/media/video/cx23885/Kconfig"
+
+source "drivers/media/video/cx25821/Kconfig"
+
+source "drivers/media/video/cx88/Kconfig"
+
+config VIDEO_HEXIUM_GEMINI
+ tristate "Hexium Gemini frame grabber"
+ depends on PCI && VIDEO_V4L2 && I2C
+ select VIDEO_SAA7146_VV
+ ---help---
+ This is a video4linux driver for the Hexium Gemini frame
+ grabber card by Hexium. Please note that the Gemini Dual
+ card is *not* fully supported.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hexium_gemini.
+
+config VIDEO_HEXIUM_ORION
+ tristate "Hexium HV-PCI6 and Orion frame grabber"
+ depends on PCI && VIDEO_V4L2 && I2C
+ select VIDEO_SAA7146_VV
+ ---help---
+ This is a video4linux driver for the Hexium HV-PCI6 and
+ Orion frame grabber cards by Hexium.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hexium_orion.
+
+source "drivers/media/video/ivtv/Kconfig"
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
To compile this driver as a module, choose M here: the
module will be called meye.
-source "drivers/media/video/saa7134/Kconfig"
-
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
depends on PCI && VIDEO_V4L2 && I2C
To compile this driver as a module, choose M here: the
module will be called mxb.
-config VIDEO_HEXIUM_ORION
- tristate "Hexium HV-PCI6 and Orion frame grabber"
- depends on PCI && VIDEO_V4L2 && I2C
- select VIDEO_SAA7146_VV
+source "drivers/media/video/saa7134/Kconfig"
+
+source "drivers/media/video/saa7164/Kconfig"
+
+source "drivers/media/video/zoran/Kconfig"
+
+endif # V4L_PCI_DRIVERS
+
+#
+# ISA & parallel port drivers configuration
+#
+
+menuconfig V4L_ISA_PARPORT_DRIVERS
+ bool "V4L ISA and parallel port devices"
+ depends on ISA || PARPORT
+ default n
---help---
- This is a video4linux driver for the Hexium HV-PCI6 and
- Orion frame grabber cards by Hexium.
+ Say Y here to enable support for these ISA and parallel port drivers.
+
+if V4L_ISA_PARPORT_DRIVERS
+
+config VIDEO_BWQCAM
+ tristate "Quickcam BW Video For Linux"
+ depends on PARPORT && VIDEO_V4L2
+ help
+ Say Y have if you the black and white version of the QuickCam
+ camera. See the next option for the color version.
To compile this driver as a module, choose M here: the
- module will be called hexium_orion.
+ module will be called bw-qcam.
-config VIDEO_HEXIUM_GEMINI
- tristate "Hexium Gemini frame grabber"
- depends on PCI && VIDEO_V4L2 && I2C
- select VIDEO_SAA7146_VV
- ---help---
- This is a video4linux driver for the Hexium Gemini frame
- grabber card by Hexium. Please note that the Gemini Dual
- card is *not* fully supported.
+config VIDEO_CQCAM
+ tristate "QuickCam Colour Video For Linux"
+ depends on PARPORT && VIDEO_V4L2
+ help
+ This is the video4linux driver for the colour version of the
+ Connectix QuickCam. If you have one of these cameras, say Y here,
+ otherwise say N. This driver does not work with the original
+ monochrome QuickCam, QuickCam VC or QuickClip. It is also available
+ as a module (c-qcam).
+ Read <file:Documentation/video4linux/CQcam.txt> for more information.
+
+config VIDEO_PMS
+ tristate "Mediavision Pro Movie Studio Video For Linux"
+ depends on ISA && VIDEO_V4L2
+ help
+ Say Y if you have the ISA Mediavision Pro Movie Studio
+ capture card.
To compile this driver as a module, choose M here: the
- module will be called hexium_gemini.
+ module will be called pms.
+
+config VIDEO_W9966
+ tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
+ depends on PARPORT_1284 && PARPORT && VIDEO_V4L2
+ help
+ Video4linux driver for Winbond's w9966 based Webcams.
+ Currently tested with the LifeView FlyCam Supra.
+ If you have one of these cameras, say Y here
+ otherwise say N.
+ This driver is also available as a module (w9966).
+
+ Check out <file:Documentation/video4linux/w9966.txt> for more
+ information.
+
+endif # V4L_ISA_PARPORT_DRIVERS
+
+menuconfig V4L_PLATFORM_DRIVERS
+ bool "V4L platform devices"
+ default n
+ ---help---
+ Say Y here to enable support for platform-specific V4L drivers.
+
+if V4L_PLATFORM_DRIVERS
+
+source "drivers/media/video/marvell-ccic/Kconfig"
+
+config VIDEO_VIA_CAMERA
+ tristate "VIAFB camera controller support"
+ depends on FB_VIA
+ select VIDEOBUF_DMA_SG
+ select VIDEO_OV7670
+ help
+ Driver support for the integrated camera controller in VIA
+ Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
+ with ov7670 sensors.
+
+#
+# Platform multimedia device configuration
+#
+
+source "drivers/media/video/davinci/Kconfig"
+
+source "drivers/media/video/omap/Kconfig"
+
+config VIDEO_SH_VOU
+ tristate "SuperH VOU video output driver"
+ depends on VIDEO_DEV && ARCH_SHMOBILE
+ select VIDEOBUF_DMA_CONTIG
+ help
+ Support for the Video Output Unit (VOU) on SuperH SoCs.
+
+config VIDEO_VIU
+ tristate "Freescale VIU Video Driver"
+ depends on VIDEO_V4L2 && PPC_MPC512x
+ select VIDEOBUF_DMA_CONTIG
+ default y
+ ---help---
+ Support for Freescale VIU video driver. This device captures
+ video data, or overlays video on DIU frame buffer.
+
+ Say Y here if you want to enable VIU device on MPC5121e Rev2+.
+ In doubt, say N.
config VIDEO_TIMBERDALE
tristate "Support for timberdale Video In/LogiWIN"
---help---
Add support for the Video In peripherial of the timberdale FPGA.
-source "drivers/media/video/cx88/Kconfig"
-
-source "drivers/media/video/cx23885/Kconfig"
-
-source "drivers/media/video/cx25821/Kconfig"
-
-source "drivers/media/video/au0828/Kconfig"
-
-source "drivers/media/video/ivtv/Kconfig"
-
-source "drivers/media/video/cx18/Kconfig"
-
-source "drivers/media/video/saa7164/Kconfig"
-
-source "drivers/media/video/marvell-ccic/Kconfig"
+config VIDEO_VINO
+ tristate "SGI Vino Video For Linux"
+ depends on I2C && SGI_IP22 && VIDEO_V4L2
+ select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
+ help
+ Say Y here to build in support for the Vino video input system found
+ on SGI Indy machines.
config VIDEO_M32R_AR
tristate "AR devices"
To compile this driver as a module, choose M here: the
module will be called arv.
-config VIDEO_VIA_CAMERA
- tristate "VIAFB camera controller support"
- depends on FB_VIA
- select VIDEOBUF_DMA_SG
- select VIDEO_OV7670
- help
- Driver support for the integrated camera controller in VIA
- Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
- with ov7670 sensors.
-
config VIDEO_OMAP3
tristate "OMAP 3 Camera support (EXPERIMENTAL)"
depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
source "drivers/media/video/s5p-tv/Kconfig"
-#
-# USB Multimedia device configuration
-#
-
-menuconfig V4L_USB_DRIVERS
- bool "V4L USB devices"
- depends on USB
- default y
-
-if V4L_USB_DRIVERS && USB
-
-source "drivers/media/video/uvc/Kconfig"
-
-source "drivers/media/video/gspca/Kconfig"
-
-source "drivers/media/video/pvrusb2/Kconfig"
-
-source "drivers/media/video/hdpvr/Kconfig"
-
-source "drivers/media/video/em28xx/Kconfig"
-
-source "drivers/media/video/tlg2300/Kconfig"
-
-source "drivers/media/video/cx231xx/Kconfig"
-
-source "drivers/media/video/tm6000/Kconfig"
-
-source "drivers/media/video/usbvision/Kconfig"
-
-source "drivers/media/video/et61x251/Kconfig"
-
-source "drivers/media/video/sn9c102/Kconfig"
-
-source "drivers/media/video/pwc/Kconfig"
-
-config USB_ZR364XX
- tristate "USB ZR364XX Camera support"
- depends on VIDEO_V4L2
- select VIDEOBUF_GEN
- select VIDEOBUF_VMALLOC
- ---help---
- Say Y here if you want to connect this type of camera to your
- computer's USB port.
- See <file:Documentation/video4linux/zr364xx.txt> for more info
- and list of supported cameras.
-
- To compile this driver as a module, choose M here: the
- module will be called zr364xx.
-
-config USB_STKWEBCAM
- tristate "USB Syntek DC1125 Camera support"
- depends on VIDEO_V4L2 && EXPERIMENTAL
- ---help---
- Say Y here if you want to use this type of camera.
- Supported devices are typically found in some Asus laptops,
- with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
- may be supported by the stk11xx driver, from which this is
- derived, see <http://sourceforge.net/projects/syntekdriver/>
-
- To compile this driver as a module, choose M here: the
- module will be called stkwebcam.
-
-config USB_S2255
- tristate "USB Sensoray 2255 video capture device"
- depends on VIDEO_V4L2
- select VIDEOBUF_VMALLOC
- default n
- help
- Say Y here if you want support for the Sensoray 2255 USB device.
- This driver can be compiled as a module, called s2255drv.
-
-endif # V4L_USB_DRIVERS
+endif # V4L_PLATFORM_DRIVERS
endif # VIDEO_CAPTURE_DRIVERS
menuconfig V4L_MEM2MEM_DRIVERS
This is a virtual test device for the memory-to-memory driver
framework.
+config VIDEO_SAMSUNG_S5P_G2D
+ tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
+ depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ default n
+ ---help---
+ This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
+ 2d graphics accelerator.
+
+config VIDEO_SAMSUNG_S5P_JPEG
+ tristate "Samsung S5P/Exynos4 JPEG codec driver (EXPERIMENTAL)"
+ depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P && EXPERIMENTAL
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ ---help---
+ This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec
config VIDEO_SAMSUNG_S5P_MFC
tristate "Samsung S5P MFC 5.1 Video Codec"
projects / ~andy / linux / blobdiff