#define WACOM_INTUOS_RES 100
#define WACOM_INTUOS3_RES 200
+/* Scale factor relating reported contact size to logical contact area.
+ * 2^14/pi is a good approximation on Intuos5 and 3rd-gen Bamboo
+ */
+#define WACOM_CONTACT_AREA_SCALE 2607
+
static int wacom_penpartner_irq(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
/* Enter report */
if ((data[1] & 0xfc) == 0xc0) {
- if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+ if (features->quirks == WACOM_QUIRK_MULTI_INPUT)
wacom->shared->stylus_in_proximity = true;
/* serial number of the tool */
/* Exit report */
if ((data[1] & 0xfe) == 0x80) {
- if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+ if (features->quirks == WACOM_QUIRK_MULTI_INPUT)
wacom->shared->stylus_in_proximity = false;
/*
t = (data[6] << 2) | ((data[7] >> 6) & 3);
if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
(features->type >= INTUOS5S && features->type <= INTUOS5L) ||
- features->type == WACOM_21UX2 || features->type == WACOM_24HD) {
+ (features->type >= WACOM_21UX2 && features->type <= WACOM_24HD)) {
t = (t << 1) | (data[1] & 1);
}
input_report_abs(input, ABS_PRESSURE, t);
input_report_abs(input, ABS_WHEEL, 0);
}
- if (data[2] | (data[3] & 0x01) | data[4]) {
+ if (data[2] | (data[3] & 0x01) | data[4] | data[5]) {
input_report_key(input, wacom->tool[1], 1);
input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
} else {
input_report_abs(input, ABS_MISC, 0);
}
} else {
- if (features->type == WACOM_21UX2) {
+ if (features->type == WACOM_21UX2 || features->type == WACOM_22HD) {
input_report_key(input, BTN_0, (data[5] & 0x01));
input_report_key(input, BTN_1, (data[6] & 0x01));
input_report_key(input, BTN_2, (data[6] & 0x02));
input_report_key(input, BTN_Z, (data[8] & 0x20));
input_report_key(input, BTN_BASE, (data[8] & 0x40));
input_report_key(input, BTN_BASE2, (data[8] & 0x80));
+
+ if (features->type == WACOM_22HD) {
+ input_report_key(input, KEY_PROG1, data[9] & 0x01);
+ input_report_key(input, KEY_PROG2, data[9] & 0x02);
+ input_report_key(input, KEY_PROG3, data[9] & 0x04);
+ }
} else {
input_report_key(input, BTN_0, (data[5] & 0x01));
input_report_key(input, BTN_1, (data[5] & 0x02));
if (touch) {
int x = (data[2] << 4) | (data[4] >> 4);
int y = (data[3] << 4) | (data[4] & 0x0f);
- int w = data[6];
+ int a = data[5];
+
+ // "a" is a scaled-down area which we assume is roughly
+ // circular and which can be described as: a=(pi*r^2)/C.
+ int x_res = input_abs_get_res(input, ABS_X);
+ int y_res = input_abs_get_res(input, ABS_Y);
+ int width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE);
+ int height = width * y_res / x_res;
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
- input_report_abs(input, ABS_MT_TOUCH_MAJOR, w);
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, width);
+ input_report_abs(input, ABS_MT_TOUCH_MINOR, height);
}
}
case CINTIQ:
case WACOM_BEE:
case WACOM_21UX2:
+ case WACOM_22HD:
case WACOM_24HD:
sync = wacom_intuos_irq(wacom_wac);
break;
wacom_setup_cintiq(wacom_wac);
break;
+ case WACOM_22HD:
+ __set_bit(KEY_PROG1, input_dev->keybit);
+ __set_bit(KEY_PROG2, input_dev->keybit);
+ __set_bit(KEY_PROG3, input_dev->keybit);
+ /* fall through */
+
case WACOM_21UX2:
__set_bit(BTN_A, input_dev->keybit);
__set_bit(BTN_B, input_dev->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
- input_mt_init_slots(input_dev, features->touch_max);
+ input_mt_init_slots(input_dev, features->touch_max, 0);
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
- 0, 255, 0, 0);
+ 0, features->x_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
+ 0, features->y_max, 0, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
0, features->x_max,
case TABLETPC2FG:
if (features->device_type == BTN_TOOL_FINGER) {
- input_mt_init_slots(input_dev, features->touch_max);
+ input_mt_init_slots(input_dev, features->touch_max, 0);
input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
0, MT_TOOL_MAX, 0, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
- input_mt_init_slots(input_dev, features->touch_max);
+ input_mt_init_slots(input_dev, features->touch_max, 0);
if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
__set_bit(BTN_TOOL_TRIPLETAP,
input_set_abs_params(input_dev,
ABS_MT_TOUCH_MAJOR,
- 0, 255, 0, 0);
+ 0, features->x_max, 0, 0);
+ input_set_abs_params(input_dev,
+ ABS_MT_TOUCH_MINOR,
+ 0, features->y_max, 0, 0);
}
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
{ "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047,
63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0xF4 =
- { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
+ { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
+ 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0xF8 =
+ { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0x3F =
{ "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023,
static const struct wacom_features wacom_features_0xCC =
{ "Wacom Cintiq 21UX2", WACOM_PKGLEN_INTUOS, 87200, 65600, 2047,
63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0xFA =
+ { "Wacom Cintiq 22HD", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047,
+ 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0x90 =
{ "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255,
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
{ USB_DEVICE_WACOM(0xEF) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },
+ { USB_DEVICE_WACOM(0xF8) },
+ { USB_DEVICE_WACOM(0xFA) },
{ USB_DEVICE_LENOVO(0x6004) },
{ }
};