ide: fix PCI refcounting

[~andy/linux] / drivers / ide / ide-lib.c

diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 3be3c69383f2e1ec256f0c19a77dfdcfe071e5b1..92a6c7bcf5278dc8594eb7a73113c9d648647f63 100644 (file)
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -111,18 +111,6 @@ u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
 
 EXPORT_SYMBOL(ide_rate_filter);
 
-int ide_dma_enable (ide_drive_t *drive)
-{
-       ide_hwif_t *hwif        = HWIF(drive);
-       struct hd_driveid *id   = drive->id;
-
-       return ((int)   ((((id->dma_ultra >> 8) & hwif->ultra_mask) ||
-                         ((id->dma_mword >> 8) & hwif->mwdma_mask) ||
-                         ((id->dma_1word >> 8) & hwif->swdma_mask)) ? 1 : 0));
-}
-
-EXPORT_SYMBOL(ide_dma_enable);
-
 int ide_use_fast_pio(ide_drive_t *drive)
 {
        struct hd_driveid *id = drive->id;
@@ -261,12 +249,34 @@ static int ide_scan_pio_blacklist (char *model)
        return -1;
 }
 
+unsigned int ide_pio_cycle_time(ide_drive_t *drive, u8 pio)
+{
+       struct hd_driveid *id = drive->id;
+       int cycle_time = 0;
+
+       if (id->field_valid & 2) {
+               if (id->capability & 8)
+                       cycle_time = id->eide_pio_iordy;
+               else
+                       cycle_time = id->eide_pio;
+       }
+
+       /* conservative "downgrade" for all pre-ATA2 drives */
+       if (pio < 3) {
+               if (cycle_time && cycle_time < ide_pio_timings[pio].cycle_time)
+                       cycle_time = 0; /* use standard timing */
+       }
+
+       return cycle_time ? cycle_time : ide_pio_timings[pio].cycle_time;
+}
+
+EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
+
 /**
  *     ide_get_best_pio_mode   -       get PIO mode from drive
  *     @drive: drive to consider
  *     @mode_wanted: preferred mode
  *     @max_mode: highest allowed mode
- *     @d: PIO data
  *
  *     This routine returns the recommended PIO settings for a given drive,
  *     based on the drive->id information and the ide_pio_blacklist[].
@@ -275,22 +285,18 @@ static int ide_scan_pio_blacklist (char *model)
  *     This is used by most chipset support modules when "auto-tuning".
  */
 
-u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d)
+u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
 {
        int pio_mode;
-       int cycle_time = 0;
-       int use_iordy = 0;
        struct hd_driveid* id = drive->id;
        int overridden  = 0;
 
-       if (mode_wanted != 255) {
-               pio_mode = mode_wanted;
-               use_iordy = (pio_mode > 2);
-       } else if (!drive->id) {
-               pio_mode = 0;
-       } else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
-               overridden = 1;
-               use_iordy = (pio_mode > 2);
+       if (mode_wanted != 255)
+               return min_t(u8, mode_wanted, max_mode);
+
+       if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0 &&
+           (pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
+               printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name);
        } else {
                pio_mode = id->tPIO;
                if (pio_mode > 2) {     /* 2 is maximum allowed tPIO value */
@@ -298,9 +304,7 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_p
                        overridden = 1;
                }
                if (id->field_valid & 2) {        /* drive implements ATA2? */
-                       if (id->capability & 8) { /* drive supports use_iordy? */
-                               use_iordy = 1;
-                               cycle_time = id->eide_pio_iordy;
+                       if (id->capability & 8) { /* IORDY supported? */
                                if (id->eide_pio_modes & 7) {
                                        overridden = 0;
                                        if (id->eide_pio_modes & 4)
@@ -310,31 +314,27 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_p
                                        else
                                                pio_mode = 3;
                                }
-                       } else {
-                               cycle_time = id->eide_pio;
                        }
                }
 
+               if (overridden)
+                       printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n",
+                                        drive->name);
+
                /*
                 * Conservative "downgrade" for all pre-ATA2 drives
                 */
-               if (pio_mode && pio_mode < 4) {
+               if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_DOWNGRADE) == 0 &&
+                   pio_mode && pio_mode < 4) {
                        pio_mode--;
-                       overridden = 1;
-                       if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time)
-                               cycle_time = 0; /* use standard timing */
+                       printk(KERN_INFO "%s: applying conservative "
+                                        "PIO \"downgrade\"\n", drive->name);
                }
        }
-       if (pio_mode > max_mode) {
+
+       if (pio_mode > max_mode)
                pio_mode = max_mode;
-               cycle_time = 0;
-       }
-       if (d) {
-               d->pio_mode = pio_mode;
-               d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time;
-               d->use_iordy = use_iordy;
-               d->overridden = overridden;
-       }
+
        return pio_mode;
 }